Scribd
Upload
26 views

Pipe Network Tutorial

The document provides instructions for using a Matlab program called Flows in Pipe Networks that models flows in pipe networks. It describes how to save and run the program, input pipe network data, view results including energy and hydraulic grade lines, and get a summary of heads and flows for all pipes.

Uploaded by

galatrod_85603314
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
26 views

Pipe Network Tutorial

The document provides instructions for using a Matlab program called Flows in Pipe Networks that models flows in pipe networks. It describes how to save and run the program, input pipe network data, view results including energy and hydraulic grade lines, and get a summary of heads and flows for all pipes.

Uploaded by

galatrod_85603314
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

TUTORIAL of Flows in Pipe Networks (Rev.

5/12/2015)
Flows in Pipe Networks is a Matlab program developed by Arturo Leon at Oregon State University.

The developer makes no warranties, either express or implied, with respect to the program Flows in Pipe
Networks described here, in its quality, performance, or fitness for any purpose.

To execute this program, first save the program to the address you prefer. For example: C:\Pipes. Then
enter data of the pipe network in the input file Pipe_Network_Data.xlsx as follows:
In the folder you downloaded the program, double click on MAIN_SCRIPT.m to open this Matlab file.
Next, on the keyboard press F5 or click on run ( ). This will run the model and will show a window
similar to what is shown below.

The plot above is a graph showing the energy and hydraulic grade lines for the continuous path chosen to
plot in the input data ([ORDERPLOT in file Pipe_Network_Data.xlsx). Finally, a summary of the
piezometric and total energy heads (left and right) and flow discharges for all pipes of the network is
generated at the Matlab command window as follows:
Please send your suggestions for improvement or questions to:
Arturo Leon ([email protected])

You might also like