Scribd Logo
Upload

Welcome to Scribd!

  • 178 views

    20 MN VS6

    Uploaded by

    bill
    This document provides information on the Imatra 280 steel grade, specifically variant 7260. It is a micro-alloyed steel for general purposes that is continuously cast. Variant 7260 meets the standardized grades 19MnVS6 according to EN10267 and 20MnV6 (1.5217) according to DIN in terms of chemical composition and mechanical properties. The steel has a yield strength minimum of 450 MPa, tensile strength between 550-750 MPa, and elongation at fracture of at least 20%.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    20 MN VS6

    Uploaded by

    bill
    178 views2 pages
    This document provides information on the Imatra 280 steel grade, specifically variant 7260. It is a micro-alloyed steel for general purposes that is continuously cast. Variant 7260 meets the standardized grades 19MnVS6 according to EN10267 and 20MnV6 (1.5217) according to DIN in terms of chemical composition and mechanical properties. The steel has a yield strength minimum of 450 MPa, tensile strength between 550-750 MPa, and elongation at fracture of at least 20%.

    Original Description:

    steel power

    Original Title

    20MnVS6--

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides information on the Imatra 280 steel grade, specifically variant 7260. It is a micro-alloyed steel for general purposes that is continuously cast. Variant 7260 meets the standardized grades 19MnVS6 according to EN10267 and 20MnV6 (1.5217) according to DIN in terms of chemical composition and mechanical properties. The steel has a yield strength minimum of 450 MPa, tensile strength between 550-750 MPa, and elongation at fracture of at least 20%.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    178 views2 pages

    20 MN VS6

    Uploaded by

    bill
    This document provides information on the Imatra 280 steel grade, specifically variant 7260. It is a micro-alloyed steel for general purposes that is continuously cast. Variant 7260 meets the standardized grades 19MnVS6 according to EN10267 and 20MnV6 (1.5217) according to DIN in terms of chemical composition and mechanical properties. The steel has a yield strength minimum of 450 MPa, tensile strength between 550-750 MPa, and elongation at fracture of at least 20%.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Material data sheet Imatra 280

    Steel grade Last revised: Wed, 21 Jun 2017 10:00:06 GMT

    20MnVS6** All

    General Information
    Grade 280 variant 7260 is a micro-alloyed steel for general purposes. It is continuously cast.The chemical analysis meets the standardized grades
    19MnVS6 according to EN10267 and 20MnV6 (1.5217) according to DIN mechanical properties.

    Similar designations
    EN 10267 - 19MnVS6

    Chemical composition
    Variant Cast Di Weldability C% Si % Mn % P% S% Cr % V% N%
    CEV 0.54max Min 0.15 0.15 1.20 - 0.015 - 0.080 0.0070
    7260 CC 1.95
    Pcm 0.31max Max 0.22 0.80 1.60 0.030 0.040 0.30 0.150 0.0200

    Mechanical Properties
    Dimension Yield strength min Tensile strength Elongation A5 Reduction of area Zmin Impact (ISO-V)
    Variant Condition Format Hardness
    [mm] [MPa] [MPa] [%] [%] strengthmin
    Round
    45 < 80 450* 550-750 20 40 < 220 HB 20 C 27 J (long)
    bar
    7260 +AR
    Round
    80 < 160 410* 550-700 20 40 < 220 HB 20 C 27 J (long)
    bar
    Rp0.2 * Reh, ** Rel

    Transformation temperatures
    Temperature C
    MS 398
    AC1 715
    AC3 837

    Other properties (typical values)


    Youngs module (GPa) Poissons ratio (-) Shear module (GPa) Density (kg/m3)
    210 0.3 80 7800
    Average CTE 20-300C Specific heat capacity 50/100C Thermal conductivity Ambient Electrical resistivityAmbient temperature
    (m/mK) (J/kgK) temperature (W/mK) (m)
    12 460 - 480 40 - 45 0.20 - 0.25

    Contact us
    Would you like to know more about our offers? Dont hesitate to contact us:
    Via e-mail: [email protected]
    Via telephone: +46 8 622 1300
    For more detailed information please visit http://www.ovako.com/en/Contact-Ovako/

    Disclaimer
    The information in this document is for illustrative purposes only. The data and examples are only general recommendations and not a warranty or a guarantee.
    The suitability of a product for a specific application can be confirmed only by Ovako once given the actual conditions.The purchaser of an Ovako product has
    the responsibility to ascertain and control the applicability of the products before using them. Continuous development may necessitate changes in technical
    data without notice. This document is only valid for Ovako material. Other material, covering the same international specifications, does not necessarily comply
    with the properties presented in this document.

    You might also like