Optiswitch 5300 - The Switch For Hot and Cold

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

OPTISWITCH 5300

The switch for hot and cold

OPTISWITCH 5300
Vibration level switch for extreme process conditions
KROHNE tuning fork technology level switches have long been valued for their
superior robustness and reliability.

The OPTISWITCH 5300 is our latest development and was designed to reliably
detect liquids in harsh environments such as refineries or offshore platforms.
With its extensive set of approvals, this switch is ready to deliver top performance
wherever you need an extra tough device for hot and cold or high pressure
applications.

OPTISWITCH 5300 C
Technology for extreme conditions
The sturdy tuning fork of the OPTISWITCH 5300 resists corrosion
(e.g. sour gas) as well as high and low temperatures. The switch
reliably detects liquids with very low densities 0.42 kg/l/26.22 lb/ft
(e.g. ammonia) in processes from 196 to +450 C/321 to +842 F,
and its pressure range meets boiler standards (saturated steam
applications).

Safety at the highest level


The specific environment of e.g. petrochemical plants, refineries
and offshore platforms calls for a high level of safety to prevent
injury, pollution as well as damage to equipment. KROHNE puts
safety first: The OPTISWITCH 5300 is available with hazardous area,
ship, steam boiler and NACE approvals. It also features a permanent
fault monitoring function as well as a second process seal made of
ceramic for additional safety. The switch provides high and low level
alarm and can be used as overfill protection (acc. WHG) or pump Vibration level switch with selectable insertion
dry-run detection. length for heavy-duty liquid applications

Designed for use in safety loops SIL2/3 as a single device for a Sensor lengths up to 3 m/9.8 ft
single safety function (1oo1), the OPTISWITCH 5300 meets SIL2 and Temperature range
in a homogenous redundant setup, it conforms to SIL3 (1oo2) from 196 to +450 C/321 to +842 F
architecture requirements. Pressure range from
1 to 160 barg/14.5 to 2320.6 psig
Density 0.47 kg/l/29.34 lb/ft3 as standard;
A matter of choice
0.42 kg/l/26.22 lb/ft (optional)
The OPTISWITCH 5300 comes in standard and selectable insertion Process connections
lengths, with a large choice of sensor materials and process from DN40, 1 ANSI, G1 and 1NPT
connections. Its 40 mm/1.58-long tuning fork fits into almost any Wetted parts made of Inconel Alloy
bypass chamber and can be installed in addition to a level gauge. 718 with 316L or Hastelloy C-22
2-wire 8/16 mA, relay (DPDT) and
Highlights: transistor PNP/NPN electronics
Ex, WHG, SIL, NACE and various ship
Adjustment-free setup approvals
Unaffected by turbulences or varying dielectrics and densities EN 12952-11 (water tube boilers) and
Extra safe with second process seal (ceramic) EN 12953-9 (Shell boilers)
Self-monitoring sensor and electronics element
Functional test possible during operation Typical applications
SIL2/3 compliant
Steam boilers
Liquefied natural gas (LNG) tankers
Liquid nitrogen and ethylene tanks
Distillation columns

Industries
Power
Petrochemical
Oil and Gas
KROHNE - 03/2016 - 4004975601 FL OPTISWITCH 5300 R01 en

Contact
Head office:
KROHNE Messtechnik GmbH
Ludwig-Krohne-Str. 5
47058 Duisburg
Subject to change without notice.

Germany
Tel.: +49 203 301 0
Fax: +49 203 301 103 89
[email protected]

You might also like