Scribd
Upload
313 views2 pages

Pump Template

This data sheet provides specifications for a reflux pump used to pump light hydrocarbons. The pump has a normal capacity of 2.3 gpm and is designed for a maximum of 2.8 gpm. It will operate at a temperature of 99.5°F and a vapor pressure of 30.3 psig. The pump is an end suction, enclosed impeller type with carbon steel casing and stainless steel impeller and shaft. It requires a total brake horsepower of less than one and will be powered by a 460V, 3 phase, 60Hz electric motor running at 1700 RPM.

Uploaded by

amitkray
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
313 views2 pages

Pump Template

This data sheet provides specifications for a reflux pump used to pump light hydrocarbons. The pump has a normal capacity of 2.3 gpm and is designed for a maximum of 2.8 gpm. It will operate at a temperature of 99.5°F and a vapor pressure of 30.3 psig. The pump is an end suction, enclosed impeller type with carbon steel casing and stainless steel impeller and shaft. It requires a total brake horsepower of less than one and will be powered by a 460V, 3 phase, 60Hz electric motor running at 1700 RPM.

Uploaded by

amitkray
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

CENTRIFUGAL PUMP DATA SHEET

Company: Process Engineering Associates, LLC


Project:
Rev Note:
Service: Reflux Pump
Item No: RefluxPump
Date: 4/2/09
PROCESS AND PERFORMANCE DATA
Fluid: Light Hydrocarbons
Normal Capacity (gpm ) 2.3 Design Capacity (gpm): 2.8
% Total Solids: 0.00 % TS Dissolved: 0.00 % TS Suspended: 0.00 Max. Particle Size:
Specific Gravity: 0.70 Viscosity (cP): 0.63
Temperature (F): 99.5 Vapor Pressure (psig): 30.3
HEAD SUCTION DISCHARGE
DIFFERENTIAL
Static (ft of Liquid) 0.00
Pressure (ft of Liquid.) 0.00
Friction (ft of Liquid.) 0.00
Total (ft of Liquid.) 0.00 0.00 0.00
Normal Suction Press (psig): 0.00 Normal Discharge Press (psig): 0.00
NASH Available (ft of Liquid.) -51.9 Pump Design Head (ft of Liquid.) 0 Ft.
MECHANICAL DETAILS
Included: Seal Motor Baseplate Coupling Disc Canned Motor Mag Drive Multistage

Type: End Suction In Line Recessed Impeller Self Priming

Standard: Impeller:
ANSI API Other Open Semi Open Closed
Jacket:
Full Casing Partial Casing Rear Cover/Seal Chamber None
Jacket Fluid: @ psig F
Nozzles
Size Rating Face Casing Taps Size Rating Facing
Suction: Vent:
Discharge: Drain:
Casing Support: Foot Mounted Centerline Mounted
Baseplate:
Grouted Stilt Mounted Drip Lip
Lubrication:
Oil Reservoir Oil Mist Grease
Oil Seal:
Labyrinth Lip Magnetic
Coupling:
Elastomeric Disc Taper lock bore Straight bore
Coupling Guard: OSHA APPROVED
Carbon Steel Stainless Steel Other
Single Pusher Cartridge Mount Rotating Ring:
Double Metal Bellows Component Mount Stationary Ring:
Mechanical Seal
Tandem Rubber Bellows Seal Hardware Seals/O-ring:
MFG type, mat'l code
Flush Plan No. ANSI API
Seal Flush Flush Fluid @ psig F
Double Seal with Barrier Fluid:
Seal Chamber Enlarged Cylindrical Enlarged Tapered Stuffing Box
Pump --- Total BHP Required: Efficiency:
Motor ---- Type:
HP: RPM:
Electricity --- Voltage: 460
Hertz: 60 Phase: 3
Electrical Area --- Class: I
Group: D Div: II
MATERIALS OF CONSTRUCTION
Casing
Impeller
Shaft
Shaft Sleeve
Baseplate
Gaskets
Remarks: Selected 1700 RPM due to low NPSHa
Roughly equivalent to Goulds 3196

4/2/2009 Pump Template.xls

You might also like