The document provides design data for a pressure vessel including the design pressure, working pressure, design temperature, material grades, dimensions, and calculations for the minimum required shell and dish thicknesses. It lists the input parameters, allowable stresses, dimensions, and calculated/required thicknesses for both the shell and dish sections. The provided thicknesses for both the shell and dish meet or exceed the calculated minimum thicknesses including corrosion and other allowances.
The document provides design data for a pressure vessel including the design pressure, working pressure, design temperature, material grades, dimensions, and calculations for the minimum required shell and dish thicknesses. It lists the input parameters, allowable stresses, dimensions, and calculated/required thicknesses for both the shell and dish sections. The provided thicknesses for both the shell and dish meet or exceed the calculated minimum thicknesses including corrosion and other allowances.
The document provides design data for a pressure vessel including the design pressure, working pressure, design temperature, material grades, dimensions, and calculations for the minimum required shell and dish thicknesses. It lists the input parameters, allowable stresses, dimensions, and calculated/required thicknesses for both the shell and dish sections. The provided thicknesses for both the shell and dish meet or exceed the calculated minimum thicknesses including corrosion and other allowances.
The document provides design data for a pressure vessel including the design pressure, working pressure, design temperature, material grades, dimensions, and calculations for the minimum required shell and dish thicknesses. It lists the input parameters, allowable stresses, dimensions, and calculated/required thicknesses for both the shell and dish sections. The provided thicknesses for both the shell and dish meet or exceed the calculated minimum thicknesses including corrosion and other allowances.
Download as DOCX, PDF, TXT or read online from Scribd
Download as docx, pdf, or txt
You are on page 1of 2
S.
NO Description Symbol Input Data Unit
DESIGN DATA 1 Design pressure P 1.26 Kg/cm2 2 Working pressure Pw 0.24 Kg/cm2 3 Design temperature T 50 deg.C 4 Corrosion Allowance Ca 0 mm 5 Thinning Allowance Ta 0.8 mm 6 Milling Allowance Ma 12.5 % Weld joint efficiency factor 7 (Shell) Jsh 0.85 Weld joint efficiency factor 8 (Dish) Jd 1.00 9 Radiography (Shell) Rsh 10 % 10 Radiography (Dish) Rd 100 % Calculation for shell thichness (IS:2825-clause 3.3.2) IS 2062 11 MOC Gr.B Allowable stress at room 12 temperature f 14 kg/mm2 Allowable stress at design 13 temperature f 14 kg/mm2 14 Shell inside dia. Di 2400 mm Calculated minimum 15 thickness Tc1 1.28 mm Required minimum thickness 16 with Ca Tc2 1.28 mm Required minimum thickness 17 with Ca+Ma Tc3 1.44 mm 18 Provided thickness Tc 6.00 mm Calculation for dish thichness (IS:2825-clause 3.4.5) SA 516 19 MOC Gr.70 Allowable stress at room 20 temperature f 14 kg/mm2 Allowable stress at design 21 temperature f 14 kg/mm2 22 Assume thickness t 6 mm 23 Dish inside dia. Di 2400 mm 24 Dish outside dia. Do 2412 mm I/S Crown radius 25 (Uncorroded) Ri 1920 mm 26 O/S Crown radius Ro 1926 mm I/S Knucle radius 27 (Uncorroded) ri 400 mm 28 O/S Knucle radius ro 406 mm 633.57 755.16 699.74 Effective outside height of the 29 end he 633.57 mm 30 Factor 1 he/Do 0.263 31 Factor 2 t/Do 0.0025 32 Shape factor C 1.25 Calculated minimum 33 thickness Tc1 1.4 mm Required minimum thickness 34 with Ca Tc2 1.36 mm Required minimum thickness 35 with Ca+Ta Tc3 2.16 mm Required minimum thickness 36 with Ca+Ta+Ma Tc4 2.43 mm 37 Provided thickness Tc 6.00 mm Minimum thickness after 38 forming Tc 5.20 mm