JZ

J1000
The basic inverter
V/f controlled inverter
Good torque performance (150% / 3 Hz)
Double rating ND 120%/1min and HD 150%/1 min
Overload detection function (150% during 60s)
Motor thermal function
Freely configurable V/f curve
5 programmable digital input
1 programmable digital output
1 programmable analog output
Optional RS-232C/485 communication - Modbus,
CE, UL, cUL and TUV, RoHS

Ratings
200 V Class single-phase 0.1 to 1.5 kW
200 V Class three-phase 0.1 to 4.0 kW
400 V Class three-phase 0.2 to 4.0 kW

System configuration

Power
Supply

RS232 Communications cable with PC

MCCB
it
Un
py
Co
B R
US ER
M
CO

RJ-45 / USB USB Cable CX-Drive

py
Co

CX-One
ify

Adapter
Ver
ad
Re

CK
LO A
KAW
81 YAS
P-1
JVO

AC Reactor

Remote Operator LED Remote

Extansion Cable Operator

Filter

Communication Unit

J1000
Mounting Accesories

Choke
Braking Resistor

Motor
DC Reactor

Ground

J1000 1
Specifications
Type designation

JZAB0P1BAA
Version
Coating specs:
J1000 series A: Standard

Z: European standard B: IP20

specifications
A: Standard specs

Voltage: [P indicates a decimal point]

B: Single-phase 200 VAC Max. applicable motor output
2: Three-phase 200 VAC 0P1: 0.1 kW

~
4: Three-phase 400 VAC
4P0: 4 kW

200 V class
Single-phase: JZA@ B0P1 B0P2 B0P4 B0P7 B1P5 - -
Three-phase: JZA@ 20P1 20P2 20P4 20P7 21P5 22P2 24P0
Motor For HD setting 0.12 0.25 0.4 1.1 1.5 2.2 4.0
kW1 For ND setting 0.18 0.37 0.55 1.1 2.2 3.0 5.51
characteristics

Inverter capacity kVA 0.3 0.6 1.1 1.9 3.0 4.2 6.7
Rated output current (A) at HD 0.8 1.6 3.0 5.0 8.0 11.0 17.5
Output

Rated output current (A) at ND 1.2 1.9 3.5 6.0 9.6 12.0 21.0
Max. output voltage Proportional to input voltage: 0..240 V
Max. output frequency 400 Hz
Rated input voltage Single-phase 200..240 V 50/60 Hz
and frequency 3-phase 200..240 V 50/60 Hz
supply
Power

Allowable voltage -15%..+10%

fluctuation
Allowable frequency
+5%
fluctuation
1. Based on a standard 4-pole motor for maximum applicable motor output:
Heavy Duty (HD) mode with a 150% overload capacity
Normal Duty (ND) mode with a 120% overlaod capacity

400 V class
Three-phase: JZA@ 40P2 40P4 40P7 41P5 42P2 43P0 44P0
Motor For HD setting 0.37 0.55 1.10 1.5 2.2 3.0 4.0
kW1 For ND setting 0.37 0.75 1.5 2.2 3.0 4.0 5.5
characteristics

Inverter capacity kVA 0.9 1.4 2.6 3.7 4.2 5.5 7.2
Rated output current (A) at HD 1.2 1.8 3.4 4.8 5.5 7.2 9.2
Output

Rated output current (A) at ND 1.2 2.1 4.1 5.4 6.9 8.8 11.1
Max. output voltage 0..480V (proportional to input voltage)
Max. output frequency 400 Hz
Rated input voltage
3-phase 380..480 VAC, 50/60 Hz
and frequency
supply
Power

Allowable voltage
-15%..+10%
fluctuation
Allowable frequency
+5%
fluctuation
1. Based on a standard 4-pole motor for maximum applicable motor output:
Heavy Duty (HD) mode with a 150% overload capacity
Normal Duty (ND) mode with a 120% overlaod capacity

2 Frequency inverters
Specifications
Commom specifications
Model number
Specifications
JZA@
Control methods V/f control
Output frequency range 0.1..400 Hz
Digital set value: 0.01% (-10..+50 C)
Frequency tolerance
Analogue set value: 0.1% (25 10 C)
Control functions

Digital set value: 0.01 Hz (<100 Hz), 0.1 Hz (>100 Hz)

Resolution of frequency set value
Analogue set value: 1/1000 of maximum frequency
Resolution of output frequency 0.01 Hz
Heavy duty use: 150% rated output current for one minute
Overload capability Normal duty use: 120% rated output current for one minute
0..10 V (20 k), 4..20 mA (250 ), 0..20 mA (250 )
Frequency set value
Frequency setting value (selectable)
Braking torque Short-term average deceleration torque: 150% (up 1.5 kW), 100% (for 1.5 kW), 50% (for 2.2 kW), 20% (fof bigger size)
(short term peak torque) Continous regenerative torque: Aprox 20% (125% with optional braking resistor, 10%ED, 10 s, braking transistor built itn)
V/f Characteristics Possible to program any V/f pattern
Five of the following input signals are selectable: Forward/reverse run (3-wire sequence), fault reset, external fault (NO/NC
contact input), multi-step speed operation, Jog command, accel/decel time select, external baseblock, speed search com-
Inputs signals
mand, UP/DOWN command, accel/decel hold command, LOCAL/REMOTE selection, emergency stop fault, emergency
stop alarm, self test
Following output signals are selectable (NO/NC contact output, MA, MB and MC realay: Fault, running, zero speed, speed
Output signals agree, frequency detection (output frequency <= or => set value), undervoltage detection, minor error, during baseblock, op-
Functionality

eration mode, inverter run ready, during fault retry, reverse running, during speed search.
Full-range automatic torque boost, slip compensation, 9-step speed operation (max.), restart after momentary power loss,
DC injection braking current at stop/start (50% of inverter rated current, 0.5 sec, or less), frequency reference bias/gain, ME-
Standard functions
MOBUS communications (Option), fault retry, speed search, frequency upper/lower limit setting, overtorque detection, fre-
quency jump, accel/decel time switch, accel/decel prohibited, S-curve accel/decel
Analogue inputs 1 analogue input, 0..10 V, 4..20 mA, 0..20 mA
Braking/acceleration times 0.01..6000 s
Optionally frequency, current or set value
Display
Error and status LED
Motor overload protection Electronic thermal overload relay
Instantaneous overcurrent Motor coasts to a stop at approx. 250% of inverter rated current
Heavy Duty: Motor coasts to a stop after 1 minute at 150% of inverter rated output current
Overload
Protection functions

Normal Duty: Motor coasts to a stop after 1 minute at 120% of inverter rated output current
Overvoltage Motor coasts to a stop if DC bus voltage exceed 410 V (double for 400 V class)
Stops when DC bus voltage is approx. 190 V or less (double for 400 V class)
Undervoltage
(approx. 150 V or less for single-phase series)
Following items are selectable: not provided (stop if power loss is 15 ms or longer), continuous operation if power loss is
Momentary power loss
approx. 0.5 s or shorter, continuous operation
Cooling fin overheat Protected by thermistor
Stall prevention level Stall prevention during acceleration/deceleration and constant speed operation
Ground fault Protected by electronic circuit (operation level is approx. 250% of rated output current)
Power charge indication Indicates until the main circuit voltage reaches 50 V.
Degree of protection IP20, NEMA1
Ambient conditions

Cooling fan is provided for 200 V (3-phase) 0.75 kW (1HP) to 4.0 KW, 200V (single-phase) 1.5 KW
Cooling
400 V 1.5 kW (2HP) to 4.0 KW, others are self-cooling
Ambient humidity 95% RH or less (without condensation)
Storage temperature -20 C..+60 C (short-term temperature during transportation)
Installation Indoor (no corrosive gas, dust, etc.)
Installation height Max. 1000 m
Vibration Up to 9.8 m/s2 at 10 to less than 20 Hz, Up to 6.37 m/s2 at 20 to 50 Hz

J1000 3
Dimensions
IP 20 type 0.1 to 4 kW
Figure 1 Figure 2
D2
W1 2-M4 t1 W1 4-M4 D2
H1
H

H1
H
H2

D1 t1

H2
W
W D1
D
D

Max. applicable Dimensions in mm

Voltage class Inverter model JZA@ Figure
motor output kW W1 H1 W H D t1 H2 D1 D2 Weight
0.12 B0P1 0.6
76 3 6.5 67.5
0.25 B0P2 1 56 68 0.6
Single-phase
0.55 B0P4 118 128 118 5 38.5 109.5 1.0
200 V
1.1 B0P7 137.5 5 129 1.7
2 96 108 58
1.5 B1P5 154 145.5 1.8
0.12 20P1 0.6
76 3 6.5 67.5
0.25 20P2 0.6
1 56 68
0.55 20P4 108 99.5 0.9
Three-phase 200 38.5
1.1 20P7 118 128 128 5 119.5 1.1
V
1.5 21P5 129 5 120.5 1.7
96 108 58
2.2 22P2 2 137.5 129 1.7
4.0 24P0 128 140 143 65 134.5 2.4
0.37 40P2 81 10 72.5 1.0
0.55 40P4 99 28 90.5 1.2
1.1 40P7 137.5 129 1.7
Three-phase 96 108
1.5 41P5 2 118 128 5 5 1.7
400 V 58
2.2 42P2 154 145.5 1.7
3.0 43P0 1.7
4.0 44P0 128 140 143 65 134.5 2.4

Schaffner footprint Filters

Dimensions Weight
Schaffner model
A B C D E F G H I J K L KG
A1000-FIV2010-SE 194 82 50 160 181 62 5.3 M5 25 56 118 M4 0.40
3x200 V A1000-FIV2020-SE 169 111 50 135 156 91 5.5 M5 25 96 118 M4 0.58
A1000-FIV2030-SE 174 144 50 135 161 120 5.3 M5 25 128 118 M4 0.90
A1000-FIV1010-SE 169 71 45 135 156 51 5.3 M5 22 56 118 M4 0.44
1x200 V
A1000-FIV1020-SE 169 111 50 135 156 91 5.3 M5 25 96 118 M4 0.75
A1000-FIV3005-SE 169 111 45 135 156 91 5.3 M5 22 96 118 M4 0.5
3x400 V A1000-FIV3010-SE 169 111 45 135 156 91 5.3 M5 22 96 118 M4 0.7
A1000-FIV3020-SE 174 144 50 135 161 120 5 M5 25 128 118 M4 0.9

4 Frequency inverters
Rasmi footprint Filters

Dimensions Weight
Rasmi model
W H L X Y M KG
A1000-FIV2010-RE 82 50 194 181 62 M4 0.8
3x200 V A1000-FIV2020-RE 111 50 194 181 62 M4 1.1
A1000-FIV2030-RE 144 50 174 161 120 M4 1.3
A1000-FIV1010-RE 71 45 169 156 51 M4 0.6
1x200 V
A1000-FIV1020-RE 111 50 169 156 91 M4 1.0
A1000-FIV3005-RE 111 45 169 156 91 M4 1.1
3x400 V A1000-FIV3010-RE 111 45 169 156 91 M4 1.1
A1000-FIV3020-RE 144 50 174 161 120 M4 1.3

Chokes
X
Description D Motor Dimensions Weight
diameter KW L W H X Y m Kg W Y m
A1000-FEV2102-RE 21 < 2.2 85 22 46 70 - 5 0.1
A1000-FEV2515-RE 25 < 15 105 25 62 90 - 5 0.2 L

H d

Resistor Dimensions

A1000-REJ0K15xxx A1000-REJ0K10xxx

168

27 105
11.5 182

36
45

20

J1000 5
DIN rail mounting bracket
EZZ08122A EZZ08122B

DIN rail
35.1
Four, M4 tap Four, M4 tap
Side view
(common to
all the units)

EZZ08122C

Four, M4 tap

Inverter JZA@ DIN rail mounting bracket

3-phase 200 VAC 20P1/ 20P2 / 20P4/ 20P7 EZZ08122A
21P5/ 22P2 EZZ08122B
24P0 EZZ08122C
Single-phase 200 VAC B0P1/ B0P2/ B0P4 EZZ08122A
B0P7/ B1P5 EZZ08122B
3-phase 400 VAC 40P2/ 40P4/ 40P7/ 41P5/ 42P2 EZZ08122B
44P0 EZZ08122C

6 Frequency inverters
Installation
Standard connections

Terminals +1, +2, , B1, and B2

are for connecting options.
DC reactor <2>
Never connect power supply
(option) <1> Thermal relay
Braking resistor
(option) Motor
lines to these terminals.
2 MCCB
<3> Jumper (option)
Cooling fan
For single phase 200 V r1 FU
r1
power supply, use -
R/L1 and S/L2. s1 +2 +1 B1 B2 s1 FV M
t1 FW
1 MCCB MC J1000 t1

R/L1 R/L1 U
Three phase U/T1
power supply S/L2 S/L2 Main circuit V
200 to 240 V V/T2 M
T/L3 T/L3 W
Control circuit W/T3
<4>
Forward run/stop S1
2 MCCB THRX OFF ON MC
Ground
SA Reverse run/stop S2 10 or less (400 V class)
MC Option unit 100 or less (200 V class)
THRX External fault S3 connector

Thermal relay for SA Fault reset S4 DIP switch S1 Digital output

motor cooling fan I V 250 VAC, 10 mA to 1 A
Multi-step
TRX 30 VDC, 10 mA to 1 A
speed 1
main/aux switch S5 (default setting)
MC SA
TRX +24 V 8 mA <6>
MC MA
Fault relay MA Fault

MB
Digital inputs 24 V
(default setting) <5> Sink MC
DIP
switch S3 Source
SC

Shield ground
terminal

Setting power supply Analog monitor

+V AM
2 k +10.5 max. 20 mA + output
A1 0 to +10 V (20 k) AM
Main speed 0 to +10 VDC
frequency (0)4 to 20 mA (250) AC - (2 mA) <7>
reference.
Multi-function
programmable AC
Monitor
output

shielded line twisted-pair shielded line

main circuit terminal control terminal

Main circuit
Terminal Name Function (signal level)
Main circuit power supply input Used to connect line power to the drive.
R/L1, S/L2, T/L3 Drives with single-phase 200 V input power use only terminals R/L1 and S/L2
(T/L3 is not connected to anything)
U/T1, V/T2, W/T3 Inverter output Used to connect the motor
B1, B2 Braking resistor connection Available for connecting a braking resistor or the braking resistor unit option.
+2, +1 DC reactor connection Remove the short bar between +2 and +1 when connecting DC reactor (option)
+1, DC power supply input For power supply input (+1: positive electrode; : negative electrode)*
Grounding For grounding (grounding should conform to the local grounding code.)

J1000 7
Control Circuit
Type No. Signal name Function Signal level
S1 Multi-function input selection 1 Factory setting: runs when CLOSED, stops when OPEN.
S2 Multi-function input selection 2 Factory setting: runs when CLOSED, stops when OPEN.
Digital S3 Multi-function input selection 3 Factory setting: External Fault (N.O.) 24 VDC, 8 mA
input photocoupler
signals S4 Multi-function input selection 4 Factory setting: Fault reset insulation
S5 Multi-function input selection 5 Factory setting: Multi-step speed cmd 1
SC Multi-function input selection Common Common for control signal
FS Power Supply for Frequency Setting +10 V (allowable max current 20 mA)
Analog Voltage input or current input
input FR1 Main Speed Freq Ref 0 to +10 VDC (20 k) (resolution 1/1000)
signal 4 to 20 mA (250 ) or 0 to 20 mA (250 ) Resolution: 1/500
FC Frequency reference common 0V
MA NO contact output Contact capacity
Digital
output MB NC Output Factory setting: "fault" 250 VAC, 1 A or less
signals Relay Output common 30 VDC, 1 A or less
MC
Analog AM Analog monitor output Factory setting: "output frequency" 0 to +10 V output Resolution: 1/1000 0 to 10 V 2 mA or less
output
signals AC Analog monitor common 0V Resolution: 8 bits

A B 2 mm B
C

A- Line up the tops of the drives. C - 100 m minimum

B- 30 mm minimum. D - Airflow direction

Inverter heat loss

Three-phase 200 V class

Model JZA 20P1 20P2 20P4 20P7 21P5 22P2 24P0
Inverter capacity kVA 0.3 0.6 1.1 1.9 3.0 4.2 6.7
Rated current (A) at HD 0.8 1.6 3 5 8 11 17.5
Rated current (A) at ND 1.2 1.9 3.5 6.0 9.6 12.0 21.0
Fin 4.3 7.9 16.1 27.4 54.8 70.7 110.5
loss W
Heat

HD

Inside unit 7.3 8.8 11.5 15.9 23.8 30.0 43.3

Total heat loss 11.6 16.7 27.7 43.3 78.6 100.6 153.8
Fin 4.7 7.2 14.0 35.6 48.6 57.9 93.3
loss W
Heat

ND

Inside unit 7.9 9.4 13.4 16.9 25.0 29.6 45.0

Total heat loss 12.6 16.6 28.5 43.1 73.6 87.5 138.2
Cooling Method Self Cooled Fan Cooled

Single-phase 200 V class

Model JZA B0P1 B0P2 B0P4 B0P7 B1P5
Inverter capacity kVA 0.3 0.6 1.1 1.9 3.0
Rated current (A) at HD 0.8 1.6 3 5 8
Rated current (A) at ND 1.2 1.9 3.5 6.0 9.6
Fin 4.3 7.9 16.1 42.5 54.8
loss W
Heat

HD

Inside unit 7.4 8.9 11.5 19.0 25.9

Total heat loss 11.7 16.7 27.7 61.5 80.7
Fin 4.7 7.2 15.1 26.2 48.6
loss W
Heat

ND

Inside unit 8.4 9.6 14.3 20.8 29.0

Total heat loss 13.1 16.8 28.3 56.5 77.6
Cooling Method Self Cooled Fan Cooled

8 Frequency inverters
Three-phase 400 V class
Model JZA 40P2 40P4 40P7 41P5 42P2 43P0 44P0
Inverter capacity kVA 0.9 1.4 2.6 3.7 4.2 5.5 7.2
Rated current (A) at HD 1.2 1.8 3.4 4.8 5.5 7.2 9.2
Rated current (A) at ND 1.2 2.1 4.1 5.4 6.9 8.8 11.1
Fin 19.2 28.9 42.3 70.7 81.0 84.6 107.2
loss W
Heat

HD

Inside unit 11.4 14.9 17.9 26.2 30.7 32.9 41.5

Total heat loss 30.6 43.7 60.2 96.9 111.7 117.5 148.7
Fin 8.2 15.5 26.4 37.5 49.7 55.7 71.9
loss W
Heat

ND

Inside unit 9.2 13.1 15.8 20.0 26.3 29.4 43.6

Total heat loss 17.4 28.6 42.2 57.5 76.0 85.1 115.5
Cooling Method Self Cooled Fan Cooled

Connections for braking resistor

Thermal
relay Braking resistor

Power
supply MCCB MC
R/L1 B1 B2

S/L2 U/T1
T/L3 V/T2 Motor
W/T3
THRX OFF ON MC
JZ
SA
MC
THRX

SA
Thermal relay switch for
external braking resistor
MC TRX

SA
TRX
FLT-A FLT-B
Fault contact

AC reactor
200 V class 400 V class
Max. applicable Current
Inductance Max. applicable
Current
Inductance AC reactor JZ
motor output value motor output value
mH mH
kW A kW A
0.12 2.0 2.0 ------ Power supply MCCB U X R/L1
0.25 2.0 2.0 0.2
1.3 18.0 V Y S/L2
0.55 2.5 4.2 0.4
1.1 5 2.1 0.75 2.5 8.4 W Z T/L3
1.5 10 1.1 1.5 5 4.2
2.2 15 0.71 2.2 7.5 3.6
4.0 20 0.53 4.0 10 2.2

DC reactor
200 V class 400 V class JZ
Max. applicable Current Inductance Max. applicable Current Inductance
Power
motor output value motor output value supply MCCB
mH mH R/L1
kW A kW A
S/L2
0.12 --------
T/L3
0.25 0.2
5.4 8
0.55 0.4 3.2 28
1.1 0.75 +1 +2
1.5 1.5
5.7 11
2.2 18 3 2.2
4.0 4.0 12 6.3 DC reactor

J1000 9
Ordering information

Power
Supply C
RS232 Communications cable with PC

D
MCCB
US
M
B
Co
py

ER
Un

R
it
C C
CO

RJ-45 / USB USB Cable CX-Drive

py
Co
CX-One

ify
Adapter

Ver
ad
Re
CK
LO A
KAW
81 YAS
P-1
JVO

AC Reactor
C C
Remote Operator LED Remote
Extansion Cable Operator
A
Filter
B
Communication Unit

F
J1000
Mounting Accesories

A
Choke E
Braking Resistor

Motor
DC Reactor

Ground

J1000
Specifications Model
Heavy Duty Normal Duty Standard
0.12 kW 0.8 A 0.18 kW 0.8 A JZAB0P1BAA
0.25 kW 1.6 A 0.37 kW 1.6 A JZAB0P2BAA
1x200 V 0.55 kW 3.0 A 0.75 kW 3.5 A JZAB0P4BAA
1.1 kW 5.0 A 1.1 kW 6.0 A JZAB0P7BAA
1.5 kW 8.0 A 2.2 kW 9.6 A JZAB1P5BAA
0.12 kW 0.8 A 0.18 kW 0.8 A JZA20P1BAA
0.25 kW 1.6 A 0.37 kW 1.6 A JZA20P2BAA
0.55 kW 3.0 A 0.75 kW 3.5 A JZA20P4BAA
3x200 V 1.1 kW 5.0 A 1.1 kW 6.0 A JZA20P7BAA
1.5 kW 8.0 A 2.2 kW 9.6 A JZA21P5BAA
2.2 kW 11.0 A 3.0 kW 12.0 A JZA22P2BAA
4.0 kW 17.5 A 5.5 kW 21.0 A JZA24P0BAA
0.37 kW 1.2 A 0.37 kW 1.2 A JZA40P2BAA
0.55 kW 1.8 A 0.75 kW 2.1 A JZA40P4BAA
1.1 kW 3.4 A 1.5 kW 4.1 A JZA40P7BAA
3x400 V 1.5 kW 4.8 A 2.2 kW 5.4 A JZA41P5BAA
2.2 kW 5.5 A 3.0 kW 6.9 A JZA42P2BAA
3.0 kW 7.2 A 4.0 kW 8.8 A JZA43P0BAA
4.0 kW 9.2 A 5.5 kW 11.1 A JZA44P0BAA

10 Frequency inverters
A Line filters
Inverter Line filter Schaffner Line filter Rasmi
Voltage Model JZA@ Reference Rated current (A) Weight (kg) Reference Rated current (A) Weight (kg)
20P1 / 20P2 / 20P4 / 20P7 A1000-FIV2010-SE 10 0.7 A1000-FIV2010-RE 10 0.8
3-Phase
21P5 / 22P2 A1000-FIV2020-SE 20 0.9 A1000-FIV2020-RE 20 1.1
200 VAC
24P0 A1000-FIV2030-SE 30 1.0 A1000-FIV2030-RE 30 1.3
Single-Phase B0P1 / B0P2 / B0P4 A1000-FIV1010-SE 10 0.5 A1000-FIV1010-RE 10 0.6
200 VAC B0P7 / B1P5 A1000-FIV1020-SE 20 0.7 A1000-FIV1020-RE 20 1.0
40P2 / 40P4 A1000-FIV3005-SE 5 0.5 A1000-FIV3005-RE 5 1.1
3-Phase
40P7 / 41P5 / 42P2 / 43P0 A1000-FIV3010-SE 10 0.75 A1000-FIV3010-RE 10 1.1
400 VAC
44P0 A1000-FIV3020-SE 15 1.0 A1000-FIV3020-RE 20 1.3

A Chokes
Model Diameter Description
A1000-FEV2102-RE 21 Recommended for motors below 2.2 KW
A1000-FEV2515-RE 25 Recommended for motors below 15 KW

B Communication cards
Type Model Description Function
RS232C communications interface to connect the drive to a PC or the
SI-232/JC RS-232C serial communication interface
optional copy unit
Option units

RS232C communication interface for usage with the external LED

SI-232/J Remote operator interface
operator JVOP-182
RS-422/485 Serial Interface for RS-422/485 communications using the MEMOBUS/
SI-485/J
communications interface Modbus RTU protocol
Potentiometer option for setting the frequency reference directly at the
AI-V3/J Potentiometer Option
drive

C Accessories
Types Model Description Functions
operator

JVOP-182 LED remote operator Remote operator with LED display and copy function, cable length max. 3m.
Digital

A1000-CAVOP300-EE Remote operator cable 3 meters cable for connecting remote operator

Allows the user to copy and verify parameter settings between drives. Can
Accessories

JVOP-181 USB converter / USB cable also be used as adapter to connect the drive to a PC USB port. SI-232/JC
option is required
A1000-CAVPC232-EE PC connection cable RS232 PC tool connection cable

D Computer software
Types Model Description Installation
Software

CX-drive Computer software Configuration and monitoring software tool

CX-One Computer software Configuration and monitoring software tool

E Braking unit, braking resistor unit

Inverter Braking resistor unit
Max. Inverter model JZA@ Inverter-mounted type (3 %ED, 10 sec max)
applicable Connectable min.
Voltage resistance
motor 3-phase 1-phase Type Resistance No. of used Braking torque %
output kW
0.12 20P1 B0P1 300 220
A1000-REJ0K15400-IE 400 1
0.25 20P2 B0P2 300 220
0.55 20P4 B0P4 200 220
200 V A1000-REJ0K15200-IE 200 1
(single-/ 1.1 20P7 B0P7 120 125
three-phase)
1.5 21P5 B1P5 60 A1000-REJ0K15100-IE 100 1 125
2.2 22P2 - 60 A1000-REJ0K15070-IE 70 1 120
4.0 24P0 - 32 A1000-REJ0K15062-IE 62 1 100
0.37 40P2 750 230
0.55 40P4 750 A1000-REJ0K10750-IE 750 1 230
1.1 40P7 510 130
400 V 1.5 41P5 240 A1000-REJ0K15400-IE 400 1 125
(three-phase)
2.2 42P2 200 A1000-REJ0K15300-IE 300 1 115
3.0 43P0
100 A1000-REJ0K15400-IE 400 2 105
4.0 44P0

J1000 11
F Mounting accesories
Types Model Description Applicable models JZA@
20P1/20P2/20P4/20P7
EZZ08122A
B0P1/B0P2/B0P4
21P5/22P2
DIN Rail

EZZ08122B Necessary to mount the inverter on a B0P7/B1P5

DIN rail 40P2/40P4/40P7/41P5/42P2
24P0
EZZ08122C B2P2
44P0
20P1/20P2
100-034-075
B0P1/B0P2
20P4
Heatsink external mounting attachment

100-034-076
B0P4

100-034-077 20P7

100-034-078 40P2
Additional items to mount the inverter with 21P5/22P2
100-034-79 the heatshink out of the panel. B1P5
41P5/42P2/43P0
24P0
100-034-80 B2P2
44P0

100-036-357 B4P0

B0P7
100-036-418
40P4/40P7

ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.

To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.

Cat. No. I81E-EN-01A In the interest of product improvement, specifications are subject to change without notice.

12 Frequency inverters