Metalaire Grille PDF

EXPERIENCE AIRE SUPERIORITY
GRILLES,
REGISTERS
& DIFFUSERS
Product Catalog
2013 Metal Industries, Inc.

GRILLES & REGISTERS
Supply/Return Grilles Door/Transfer Grilles Specialty Grilles
REGISTERS

GRILLES &

and Registers Reversible Core Grilles Security Grilles

Spiral Duct Grilles and Registers Accessories
Filter Grilles Industrial Grilles
Heavy Duty Grilles
GR
CEILING DIFFUSERS
Square Face Cone Diffusers Round Ceiling Diffusers
DIFFUSERS

CEILING
Louvered Face Diffusers VAV Diffusers
Concentric Supply/Return Diffusers Accessories
Perforated Ceiling Diffusers
CD
LINEAR DIFFUSERS
LINEAR DIFFUSERS & GRILLES
& GRILLES
Formations
Linear Slot Diffusers
Linear Bar Grilles
LDG
PLENUM SLOT DIFFUSERS
PLENUM SLOT
Plenum Diffusers with adjustable pattern controller
DIFFUSERS

Plenum Diffusers with high capacity fixed patterns
Light Troffer Diffusers
Accessories
PSD
CRITICAL ENVIRONMENT PRODUCTS

Laminar Flow Diffusers ENVIRONMENT
PRODUCTS

CRITICAL
Directional Flow Diffusers
Radial Flow Diffusers
Periflow Operating Room System
CE

GRILLES AND REGISTERS
METALAIRE offers a complete line of Grilles and Registers, including standard supply and return
grilles, filter grilles, heavy duty grilles, industrial grilles and a full line of security products.
Supply/Return Grilles and Registers

METALAIRE offers a complete line of supply and return grilles that are
available in aluminum, steel and stainless steel construction. These
products are offered in single and double deflection, perforated face
and cube core which fulfills any architectural or performance need. PAGE 3
Spiral Duct Grilles

METALAIRE offers a double deflection and perforated face supply
spiral duct grilles as well as a perforated face return. The spiral duct
SQUARE
grille is available in both aluminum and galvanized steel construction
GRILLES
specifically designed for spiral or round duct applications. PAGE 119
CEILING
Filter Grilles
METALAIRE offers a complete line of filter grilles which include
louvered, cubed core and perforated face. All filter grilles are
AND
designed for either 1"or 2" thick filters (by others) and include a
DIFFUSERS
hinged face for filter access. METALAIRE filter grilles are available in
aluminum, steel and stainless steel construction and are an excellent
REGISTERS
choice for exhaust and return applications PAGE 126
Heavy Duty Grilles

METALAIRE offers heavy duty return grilles which are designed for
applications where the grilles need to withstand abuse. METALAIRE
5700
heavy duty grilles are an excellent choice for return or exhaust in high
traffic areas such as gymnasiums. PAGE 152
Door/Transfer Grilles
METALAIRE offers a complete line of door and transfer grilles with a
variety of options for sight proof or lightproof applications. PAGE 165
Reversible Core Grilles and Registers

METALAIRE offers a line of removable core grilles with a clean
architectural design that allows excellent flexibility to adjust air flow
patterns without changing the appearance of the grille. PAGE 170
Industrial Grilles
METALAIRE offers a complete line of industrial grilles designed for
ceiling and high sidewall installations requiring high capacity and
performance. The METALAIRE industrial grille offering consists of
single and double deflection grilles, high capacity drum louvers and
outside air louvers. PAGE 179
2013 Metal Industries, Inc. GR1

Specialty Grilles
METALAIRE offers a full line of specialized grilles including jet
nozzles, air nozzles, under floor diffusers and round high velocity
grilles. Applications requiring high ceilings and long throw distances
such as auditoriums, civic centers, arenas and computer rooms are a
perfect fit for these grilles.
PAGE 224
Security Grilles
METALAIRE offers a complete line of security products including
perforated, lattice, and screened face heavy duty steel grilles for
use in minimum and maximum security areas, these include
correctional facilities, prisons and psychiatric hospitals where PAGE 248
security is paramount.
GRILLES AND REGISTERS
Grilles and Registers Accessories

METALAIRE GRD accessories are primarily designed to improve the
overall air handling performance of the system. Proper application
of duct and outlet accessories aide in the control of the air PAGE 341
distribution system.
GR2 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
REGISTERS
GRILLES &
SUPPLY AND RETURN GRILLES
MODELS V MODELS 4002
SUPPLY/RETURN GRILLES
MODEL 4004 MODEL LS4
MODEL CC5 MODEL RPF
METALAIRE offers a complete line of supply and return grilles available in steel and aluminum
construction to meet any application.
Aluminum Stamped Frame Supply

The V series of grilles combine the advantages of corrosion resistant
construction and durability with attractive design, solid performance and
competitive pricing.
V Single deflection
VH Double deflection
PAGE 6
VM Single deflection with integral multi-shutter damper

REGISTERS
GRILLES &
Aluminum/Steel Single Deflection Supply

The 4002 series of single deflection supply grilles are available with vertical or
horizontal blades and aluminum or steel construction. The 4002 series sets
the standard for performance and appearance in the industry. This series is
available in both surface mount and T-bar Lay-in frame styles.
4002 Aluminum
4002S Steel
4002M Aluminum Integral multi-shutter damper
4002SM Steel Integral multi-shutter damper
4002-AF Aluminum Air Foil Blade
4002S-AF Steel Air Foil Blade PAGE 11
Aluminum/Steel Double Deflection Supply

The 4004 series of double deflection grilles are available with vertical or
horizontal front blades and in aluminum or steel construction. The 4004
series is the most flexible type of grille and is available in both surface mount
and T-bar Lay-in frame styles.
4004 Aluminum
4004S Steel
4004-AF Aluminum Air Foil Blade
4004S-AF Steel Air Foil Blade PAGE 11
Aluminum Curved Blade Grilles

The L series of curved blade grilles are available in a wide range of sizes with
1-way to 4-way directional air patterns. The L series has individually adjustable
blades that can be directed to suit the application.
L/S Single deflection -1-way
LT/ST/LTC Single deflection - 2-way
LS3/LTC3 Single deflection 3-way
LS4 Single deflection 4-way
LM/SM/LMH Single deflection 1-way Integral multi-shutter damper
LTM/STM/LTCM/LTMH Single deflection 2-way Integral multi-shutter damper
LTC3M/LS3M Single deflection 3-way Integral multi-shutter damper
LS4M Single deflection 4-way Integral multi-shutter damper
LV/SH Double deflection 1-way
LTV/STH Double deflection 2-way PAGE 42
Aluminum Stamped Frame Return

The stamped frame return combines the advantage of solid performance with
competitive pricing.
RHP - Fixed blade - 40 deflection PAGE 63
REGISTERS
GRILLES &
Aluminum/Steel Louvered Return
The series RH grilles are designed with 40 blade deflection to minimize direct
sight lines into the ductwork. The series RH is available in aluminum, extruded
aluminum or steel construction. This series is available in both surface mount
RH Aluminum
RHE Extruded aluminum
SRH Steel PAGE 65
Aluminum/Steel Return
The series 4002R return grille is designed to match the 4000 series supply
models. These grilles are available in both aluminum and steel construction.
This series is available in both surface mount and T-bar Lay-in frame styles.
4002R Aluminum
4002RS Steel PAGE 83
Aluminum Cube Core Return

The series CC5 cubed core grilles is designed for return or exhaust where
maximum free area is desired and see through is not a concern. The series
CC5 is available in both surface mount and T-bar Lay-in frame styles.
CC5 1/2" x 1/2" x 1/2"
CC15 1/2" x 1/2" x 1"
CC1 1" x 1" x 1"
CC5R-6 1/2" x 1/2" x 1/2" Removable core
CC5-TBC-6 1/2" x 1/2" x 1/2" Channel frame

PAGE 94
Aluminum/Steel Perforated Return

The RP series perforated face return or exhaust is designed to blend into the
ceiling system and provide a clean, uncluttered architectural appearance. The
RP series is available in aluminum or steel construction and surface mount
RP Aluminum
SRP Steel PAGE 110

REGISTERS
GRILLES &
MODEL V
The V series grilles are an economical series of
supply grilles available in single deflection (V),
double deflection (VH) and single deflection with an
integral multi-shutter damper (VM). These grilles

combine the advantages of corrosion resistant all
aluminum construction and durability with an attractive
design and solid performance. The V series is constructed
using a one piece stamped frame and vertical front blades.
Economical pricing with solid performance
Fully adjustable blades with 2/3" spacing
Optional OB damper available on V and VH
Integral multi-shutter damper on VM
Face operated damper uses a standard screwdriver

V
Available Sizes
8x4 12 x 8
8x6 14 x 4
10 x 4 14 x 6
10 x 6 14 x 8
10 x 8 16 x 6
12 x 4 16 x 8
12 x 6
REGISTERS
GRILLES &
Mounting Hole
V
Available Sizes
8x4 12 x 8
8x6 14 x 4
10 x 4 14 x 6
10 x 6 14 x 8
10 x 8 16 x 6
12 x 4 16 x 8
12 x 6

REGISTERS
GRILLES &
SERIES V SPECIFICATIONS
SUPPLY SINGLE DEFLECTION SUPPLY SINGLE DEFLECTION
ALUMINUM MODEL V MULTI-SHUTTER DAMPER
Air outlets shall be model V manufactured by METALAIRE. ALUMINUM MODEL VM
Units shall be single deflection supply grilles of aluminum Air outlets shall be model VM manufactured by

construction with a one piece stamped frame and a METALAIRE. Units shall be single deflection supply with
single set of vertical blades. The units shall be size and a face operated multi-shutter damper. Units shall be of
quantity as outlined in the plans and specifications. aluminum construction with a one piece stamped frame
Border shall be 1 1/4" wide with aerodynamically shaped and a single set of vertical blades. The units shall be size
deflector blades on 2/3" center. Deflector blades shall and quantity as outlined in the plans and specifications.
be individually adjustable. Units designed for surface Border shall be 1 1/4" wide with aerodynamically shaped
mounting applications shall be provided with screw holes deflector blades on 2/3" centers. Deflector blades shall
in the face of the device. Blades shall pivot in friction be individually adjustable. Units designed for surface
mounting retainers. Retainers shall hold the deflector mounting applications shall be provided with screw holes
blade position throughout the specified operating range in the face of the device. Blades shall pivot in friction
of the device. Metal friction wires are not acceptable. mounting retainers. Retainers shall hold the deflector
Optional opposed blade damper shall be constructed of blade position throughout the specified operating range
steel (Model OBD) or aluminum (Model OBDA). of the device. Metal friction wires are not acceptable.
V
Damper must be operable from the face of the register. Performance Specification
SUPPLY DOUBLE DEFLECTION The manufacturer shall provide published performance
ALUMINUM MODEL VH data. Data shall be tested in accordance to ANSI/
ASHRAE Standard 70-2006.
Air outlets shall be model VH manufactured by
METALAIRE. Units shall be double deflection supply grilles
Paint Specification
of aluminum construction with a one piece stamped frame
Process shall be anodic electro-deposition using an
with front vertical blades and rear horizontal blades.
anodic acrylic paint. Units shall undergo pre-treatment
The units shall be size and quantity as outlined
including a pressurized spray stage using an alkaline
in the plans and specifications. Border shall be 1 1/4"
cleaner and a de-ionized water rinse.
wide with aerodynamically shaped deflector blades
on 2/3" centers. Deflector blades shall be individually
adjustable. Units designed for surface mounting
applications shall be provided with screw holes in the
face of the device. Blades shall pivot in friction mounting
retainers. Retainers shall hold the deflector blade position
throughout the specified operating range of the device.
Metal friction wires are not acceptable.
Optional opposed blade damper shall be constructed of
steel (Model OBD) or aluminum (Model OBDA).
Damper must be operable from the face of the register.
REGISTERS
GRILLES &
V MODEL NUMBER SPECIFICATION
ALUMINUM STAMPED BORDER
Model Neck Available Finishes
V-1 Single Deflection - Surface Mount 6 8 10 12 14 Standard
VH-1 Double Deflecton - Surface Mount 4 X X X X 01 White
VM-1 Single Deflection - Multi Shutter Damper Surface Mount 6 X X X X X Optional
8 X X X X 02 Satin Silver
10 X 03 Black
12 X 24 Mill
28 Custom Color
Available Accessories
OBD Steel Opposed Blade Damper (V & VH Only)
OBDA Aluminum Opposed Blade Damper ( V & VH Only)
L9 Equalizing Grid
PF Plaster Frame
NSH No Screw Holes

REGISTERS
GRILLES &
SERIES V PERFORMANCE DATA

MODEL V, VM, VH
CFM Outlet Size 8x4 10 x 6 12 x 6 14 x 6 12 x 8 14 x 8
Neck Velocity 225
50
Ps .006
Throw 11 18
Neck Velocity 450 240 200
100 Ps .025 .007 .005
Throw 18 13 14 11 13 10
Neck Velocity 675 360 300 257 225
150 Ps .056 .016 .011 .008 .006
Throw 23 18 19 14 18 13 17 13 16 12
Neck Velocity 900 480 400 343 300 257
200 Ps .100 .028 .020 .015 .011 .008
Throw 28 21 23 17 22 16 20 15 20 15 19 14
Neck Velocity 600 500 429 375 321
250 Ps .045 .031 .023 .017 .013
V
Throw 27 20 25 19 24 18 24 18 22 16
Neck Velocity 720 600 514 450 386
300 Ps .064 .045 .033 .025 .018
Throw 30 23 28 21 27 20 26 19 24 18
Neck Velocity 840 700 600 525 450
350 Ps .087 .061 .045 .034 .025
Throw 34 25 32 24 30 22 29 21 27 20
Neck Velocity 800 686 600 514
400 Ps .100 .074 .034 .041
Throw 38 28 36 27 34 25 32 34
Neck Velocity 900 771 675 579
450 Ps .124 .091 .070 .051
Throw 40 30 38 29 37 27 35 26
Neck Velocity 857 750 643
500 Ps .110 .084 .062
Throw 41 31 39 29 37 28
Neck Velocity 825 707
550 Ps .100 .074
Throw 41 31 39 29
Neck Velocity 900 771
600 Ps .118 .086
Throw 44 33 42 33
Neck Velocity 836
650 Ps .066
Throw 44 33
Neck Velocity 900
700 Ps .100
Throw 44 33
REGISTERS
GRILLES &
MODEL 4000
The 4000 series of supply grilles sets the standards
for performance and appearance in the industry.
They are available in aluminum (4000) and steel
(4000S) construction. The 4000 is also available in
single deflection (4002/4002S), double deflection
(4004/4004S) and single deflection with an integral
multi-shutter damper (4002M/4002SM). The 4000
series is ideal for constant or variable volume systems.
Available with either vertical or horizontal front blades
Optional stainless steel construction

Fully adjustable blades assembled on 2/3" centers
Optional opposed blade damper available in steel (OBD) or aluminum (OBDA)
4000

REGISTERS
GRILLES &
Model: H4002S-1 - Single

Model:
Deflection
H4002S-1Grille Model: V4002S-1 - Single
- Single Deflection Grille Model:
Deflection
V4002S-1Grille
- Single Deflection Grille
With Horizontal BladesWith Horizontal Blades With Vertical Blades With Vertical Blades
Listed Size Listed Size Listed Size Listed Size

1 Listed Size -11 Listed Size -1 1 Listed Size - 11 Listed Size - 1
2 5 2 5 2 5 2 5
32 32 32 32
Horizontal Horizontal .666 Vertical .666 Vertical
Deflection Blades Deflection Blades
1 1 1 Deflection Blades 1 Deflection Blades
14 14 14 14
Listed Size + 2 Listed Size + 2 Listed Size + 2 Listed Size + 2
Option: H4002S-1 OBDOption:

- Single
H4002S-1
Deflection
OBD
Register Option: V4002S-1-OBD
- Single Deflection Register Option:
- Single
V4002S-1-OBD
Deflection Register
- Single Deflection Register
With Opposed Blade Damper
With Opposed Blade Damper With Opposed Blade Damper
With Horizontal BladesWith Horizontal Blades With Vertical OpposedWith
Blade
Vertical
DamperOpposed Blade Damper
4000

1 1 1
Listed Size - 16 1
Listed Size - 16
Listed Size -16 Listed Size -16
Damper Operator Damper Operator Damper Operator Damper Operator
(Screwdriver Slot) (Screwdriver Slot) (Screwdriver Slot) (Screwdriver Slot)
5 5 1 .666 .666
34 5 31 5 1
34 1
34
32 32 32 4 32
Options: Options: Options: Options:

1
14 1
14 OBD or OBDA 1 OBD or OBDA
1
Opposed Blade Damper Opposed Blade Damper 1 4 Opposed Blade1 Damper
4 Opposed Blade Damper
Model: H4002S-6 Single Deflection

Model:Grille
H4002S-6
- Single Deflection Grille -
Lay In T-Bar - Horizontal Blades
Lay In T-Bar - Horizontal Blades
1
Overall Face = T-Bar Module - 4 1
Overall Face = T-Bar Module - 4
Listed Size Listed Size
Listed Size -41 Listed Size -41
T-Bar T-Bar
.666 .666 Module - 1 1
Module - 4
1 1 4
Horizontal Horizontal
1
14 1
14
T-Bar Module = Listed Size + 2 T-Bar Module = Listed Size + 2 1 1
T-Bar Module -4 T-Bar Module -4
Front View Front View
(Horizontal Blades) (Horizontal Blades)
Model: V4002S-6 Single Deflection

Model:
Grille
V4002S-6
- Single Deflection Grille -
Lay In T-Bar - Vertical Blades Lay In T-Bar - Vertical Blades
1
Overall Face = T-Bar Module - 4 1
Listed Size - 41 Listed Size - 41 T-Bar T-Bar
1
Module - 4 1
Module - 4
1 1
.666 .666
Horizontal Deflection Horizontal Deflection
.666 .666
11 4
Blades 114
Blades
1 1
T-Bar Module -4 T-Bar Module -4
T-Bar Module = Listed Size + 2 T-Bar Module = Listed Size + 2
Front View Front View
(Vertical Blades) (Vertical Blades)
REGISTERS
GRILLES &
Model: 4002SM
Model: 4002SM (( Single Deflection
Single Deflection Register
Register ) )
(( Multi-Shutter
Multi-Shutter Damper-Vertical Blades )
Damper-Vertical Blades )
Face View ( Vertical Blades )

Specified Duct Size
.666
Specified
Specified Duct
Duct Size -1 Size Multi-Shutter
Shutter Blades 8 Damper
Multi-Shutter
Vertical
Shutter Blades Specified Duct Size - 1
8 Damper
Deflection Blades 9
1
2 16
Vertical 15
8 4 Damper Operator
Deflection Blades
Damper 2
1
5
32 1 Operator 15
8 4
14
Listed Size + 2 Damper 3

5 16 Diameter Hole Countersunk
32 1 Operator
14
Model:
Model:
H4004-1
Model:H4004-1
(Double
H4004-1 (Double
Deflection
(Double Listed
Deflection
Grille)
Deflection Size + 2
Grille)
Grille) Face
Face
View
FaceView
(Double
View(Double
Deflection)
(Double Deflection)
Deflection)
(Horizontal
(Horizontal
Front
(HorizontalFront
Blades)
FrontBlades)
Blades) (Horizontal
(Horizontal
Front
(HorizontalFront
Blades)
FrontBlades)
Blades)
3 33
Mounting
Mounting
Holes
MountingHoles
16 Diameter
Holes 16Diameter
16 Diameter
Listed Size
Listed
ListedSize
Size (Countersunk)
(Countersunk)
(Countersunk)
Listed
Listed Size
Size -21 - 11
Listed Size -22
Horizontal
Horizontal
& Vertical
Horizontal&&Vertical
Vertical 1 71177
8 88
Deflection
Deflection
Blades
DeflectionBlades
Blades
5 55 11 11
14 .666
.666
.666
32 32 144
32
Listed
Listed
Size
ListedSize
+ 2++22
Size
9 99
16 16
16
4000
Face
Face
View
FaceView
(Double
View(DoubleDeflection)
(Double Deflection)
Deflection)
(Vertical
(Vertical
Front
(VerticalFront
Blades)
Front Blades)
Blades)
Model: V4004-1
Model:
Model: (Double
V4004-1
V4004-1(DoubleDeflection
(Double Grille)
Deflection
DeflectionGrille)
Grille)
(Vertical Front
(Vertical
(Vertical Blades)
Front
FrontBlades)
Blades) Mounting
Mounting
Holes 3 33
Holes
Mounting 16 Diameter
Holes 16Diameter
16 Diameter
(Countersunk)
(Countersunk)
(Countersunk)
Listed
Listed
Size
Listed Size
Size
Horizontal
Horizontal
& Vertical
Vertical Listed
Listed Size
Listed - 1 --11
Size
Size
Deflection
Deflection
Blades
DeflectionBlades
Blades
2 22
17 77
81188
5 55 11 11
14 .666
.666
144 .666 9 99
32 32
32
Listed Size
Listed
Listed + 2++22
Size
Size 16 16
16
Model: H4004-1
Model:
Model: (Double
H4004-1
H4004-1 Deflection
(Double
(Double Register)
Deflection
DeflectionRegister)
Register) Model:
Model:
V4004-1
Model: V4004-1
(Double
V4004-1(Double
Deflection
(Double Deflection
Register)
DeflectionRegister)
Register)
(With Damper-Horizontal
(With
(With Front
Damper-Horizontal
Damper-Horizontal Blades)
Front
Front Blades)
Blades) (With
(With
Damper-Vertical
(WithDamper-Vertical
Front
Damper-Vertical Front
Blades)
FrontBlades)
Blades)
Listed
Listed
SizeSize
Listed Size Listed
Listed
SizeSize
Listed Size
1 11
1 11 Listed
Listed
SizeSize
Listed -Size
16 - -16
16
Listed SizeSize
Listed
Listed -Size
16 - -16
16 Damper
Damper
Operator
Damper Operator
Operator
Damper
Damper
Operator
Damper Operator
Operator Options:
Options:
Options: (Screwdriver
(Screwdriver
Slot)Slot)
(Screwdriver Slot)
Options:
Options:
Options: (Screwdriver
(Screwdriver
Slot)Slot)
(Screwdriver Slot)
Opposed
Opposed
Blades
Opposed Blades
Blades
Opposed
Opposed
Blades
Opposed Blades
Blades Damper
Damper
Damper
Damper
Damper
Damper 37 77
8 3388
3 7 3377
8 88
5 55 1 1 11
5 55 1 1 11 32 32
32 14 144 .666.666
.666
14 144 .666.666
.666
32 32
32
Listed
Listed
Size
ListedSize
+ 2++22
Size Listed
Listed
Size
ListedSize
+ 2++22
Size

4 4
Model: V4004-6 (Double Deflection Grille) Lay in T-Bar - With Filler Panel
(Vertical Front Blades)
1
Overall Panel = T-Bar Spacing - 4
Horizontal & Vertical Listed Size - 1

REGISTERS 2
GRILLES &
Deflection Blades
Lay-In
13
4
Filler Panel
1 14 .666
Listed Size + 2
23 3 x 23
3 Overall Face
1 4 4
8
Model: H4004-6 (Double Deflection Grille) Lay in T-Bar - With Filler Panel Model: H4004-6 (Double Deflection Grille) Lay in T-Bar - With Filler Panel
(Horizontal Front Blades) (With Damper - Horizontal Front Blades)
1
Options:
4
Horizontal & Vertical Opposed Blades Listed Size - 1
Deflection Blades Listed Size - 1 Damper 2 Damper Operator
2
(Screwdriver Slot)
Horizontal & Vertical
Lay-In Deflection Blades
13
4
Filler Panel Lay-In
13
Filler Panel 4
1
14 .666
11
4
.666
Listed Size + 2
Listed Size + 2
3
23 3 x 23 Overall Face 3
23 3 x 23 Overall Face
4 4 4 4
Model: V4004-6 (Double Deflection Grille) Lay in T-Bar - With Filler Panel (With Damper Vertical Front Blades)
(Vertical Front Blades) Overall Panel = T-Bar Spacing - 1
4
1
Options:
Horizontal & Vertical Listed Size - 1 Opposed Blades Damper Operator

2 Listed Size - 1
Deflection Blades Damper 2 (Screwdriver Slot)
Lay-In
13
4
Deflection Blades
Filler Panel
Lay-In
13
1 14 Filler Panel 4
.666
1 14 .666
Listed Size + 2
Listed Size + 2
3
23 3 x 23 Overall Face
1 4 4 23 3 x 23
3 Overall Face
8 4 4
Model: H4004-6 (Double Deflection Grille) Lay in T-Bar - With Filler Panel
H4004S-1(With Damper
Sidewall - Horizontal
/ Ceiling
H4004S-1 Front
Surface
Sidewall Blades)
Mount/ Ceiling
/ Horizontal
Surface
1
Front
Mount
Blades
/ Horizontal Front Blades
4000
Options:
H4004S-1 Sidewall / H4004S-1 Sidewall
Ceiling Surface / Ceiling
Mount Surface
/ Horizontal Mount
Front / Horizontal Front Blades
Blades
Opposed Blades 1
H4004S-1 Sidewall / Ceiling
H4004S-1Surface Mount
Sidewall
Listed -/ Horizontal
/ Ceiling
Size
2 SurfaceFront Blades
Mount
Damper / Horizontal Front Blades
Operator
Damper
(Screwdriver Slot)
Deflection
H4004S-1 SidewallBlades
/ Ceiling Surface Mount / Horizontal Front Blades
H4004S-1 Sidewall / Ceiling Surface Mount / Horizontal Front Blades
Lay-In
13
Filler Panel 4
V4004S-1 Sidewall / Ceiling
V4004S-1Surface
Sidewall
Mount
/ Ceiling
Vertical
Surface
Front Blades
Mount Vertical Front Blades
11
4
.666
V4004S-1 Sidewall / V4004S-1 Sidewall

Ceiling Surface Mount
Listed Size / Ceiling
+ Surface
2 Vertical Front Mount
BladesVertical Front Blades
V4004S-1 Sidewall / Ceiling
V4004S-1Surface
23Sidewall
3 Overall
3 x 23Mount Vertical
/ Ceiling Front Blades
Face Surface Mount Vertical Front Blades
4 4
V4004S-1 Sidewall / Ceiling Surface Mount Vertical Front Blades
(With Damper V4004S-1 Sidewall
Vertical Front Blades)/ Ceiling Surface Mount Vertical Front Blades
4
Options:
H4004S-6 Ceiling T-Bar
H4004S-6
Lay-In Horizontal
Ceiling T-Bar
Front
Lay-In
Blades
Horizontal Front Blades
Opposed Blades Damper
1 Lay-In Horizontal Operator
H4004S-6Damper H4004S-6
Ceiling T-Bar Ceiling
Lay-In HorizontalT-Bar
Listed Size - Front
2
Front
Blades (Screwdriver Blades
Slot)
Horizontal & Vertical T-Bar T-Bar
H4004S-6 Ceiling T-Bar Lay-In Horizontal
H4004S-6 Front
Ceiling T-Bar Blades
Lay-In Horizontal Front Blades Grid Grid
Deflection Blades
Size Size
T-Bar
-1/4" T-Bar
-1/4"
Lay-In 3 Grid Grid
H4004S-6 Ceiling T-Bar
Filler Panel
Lay-In
H4004S-6 Horizontal
Ceiling
Overall Face Front
Size =T-Bar
T-Bar GridBlades
Lay-In
SizeHorizontal
Overall 4Front
- 1/4"Size = 1T-Bar
Face GridBlades
Size - 1/4" T-Bar Size
T-Bar
Size
Grid
-1/4" -1/4"
Grid
1 Size Size
V4004S-6 Ceiling T-Bar
V4004S-6
1Lay-In
4 OverallVertical
Ceiling
Face SizeFront
T-Bar
= T-BarBlades
.666 Lay-In
Grid SizeVertical
Overall - 1/4"Size Front
Face = T-Bar Blades
Grid Size - 1/4"
-1/4" -1/4"
Listed Size + 2 T-Bar T-Bar
Overall Face
V4004S-6 Size T-Bar
Ceiling = T-Bar Lay-In
Grid SizeVertical
Overall - 1/4"Size Front
Face = T-Bar Blades
Grid Size - 1/4" Grid Grid
V4004S-6 Ceiling T-Bar Lay-In Vertical
3 3 Front Blades Size
23 x 23 Overall Face T-Bar Size
T-Bar
4 4 -1/4" -1/4"
V4004S-6 Ceiling T-Bar Lay-In Vertical
V4004S-6 Front Blades
Ceiling T-Bar Lay-In Vertical Front Blades Grid Grid
Overall Face Size = T-Bar Grid SizeFace
Overall - 1/4"Size = T-Bar Grid Size - 1/4" Size Size
T-Bar
-1/4" T-Bar
-1/4"
Grid Grid
V4004S-6 Ceiling T-Bar Lay-In Vertical Front Blades T-Bar Size
V4004S-6 Ceiling T-Bar Lay-In Vertical Front Blades Size T-Bar
-1/4"
Overall Face Size = T-Bar Grid
Overall
Size Face
- 1/4"Size = T-Bar Grid Size - 1/4" Grid
-1/4" Grid
Size Size
-1/4" -1/4"
Overall
- 1/4"Size = T-Bar Grid Size - 1/4" T-Bar T-Bar
Grid Grid
Overall - 1/4"Size = T-Bar Grid Size - 1/4" Size Size
-1/4" -1/4"

Overall - 1/4"Size = T-Bar Grid Size - 1/4"
REGISTERS
GRILLES &
SERIES 4000 SPECIFICATIONS
SUPPLY SINGLE DEFLECTION SUPPLY SINGLE DEFLECTION
ALUMINUM/STEEL MODEL MULTI-SHUTTER DAMPER ALUMINUM/
4002/4002S STEEL MODEL 4002M/4002SM
Air outlets shall be model V4002/V4002S (vertical front Air outlets shall be model V4002M/V4002SM (vertical

blades) or H4002/H4002S (horizontal front blades) front blades) or H4002M/H4002SM (horizontal front
manufactured by METALAIRE. Units shall be single blades) manufactured by METALAIRE. Units shall be single
deflection supply grilles of aluminum (4002) or steel deflection supply with a face operated multi-shutter
(4002S) construction and a single set of vertical blades. damper. Units shall be single deflection supply grilles of
The units shall be size and quantity as outlined in the aluminum (4002M) or steel (4002SM) construction and
plans and specifications. Border shall be 1 1/4"wide a single set of vertical blades. The units shall be size
with aerodynamically shaped deflector blades on 2/3" and quantity as outlined in the plans and specifications.
center. Deflector blades shall be individually adjustable. Border shall be 1 1/4"wide with aerodynamically shaped
Units designed for surface mounting applications shall deflector blades on 2/3" center. Deflector blades shall
be provided with screw holes in the face of the device. be individually adjustable. Units designed for surface
Blades shall pivot in friction mounting retainers. mounting applications shall be provided with screw holes
Retainers shall hold the deflector blade position in the face of the device. Blades shall pivot in friction
throughout the specified operating range of the mounting retainers. Retainers shall hold the deflector
device. Metal friction wires are not acceptable. blade position throughout the specified operating range
4000
Optional opposed blade damper shall be constructed of the device. Metal friction wires are not acceptable.
of steel (Model OBD) or aluminum (Model OBDA).
Performance Specification
Damper must be operable from the face of the register. The manufacturer shall provide published performance
SUPPLY DOUBLE DEFLECTION data. Data shall be tested in accordance to ANSI/
ALUMINUM/STEEL MODEL ASHRAE Standard 70-2006.
4004/4004S
Paint Specification
Air outlets shall be model V4004/V4004S (vertical front Process shall be anodic electro-deposition using an
blades) or H4004/H4004S (horizontal front blades)
manufactured by METALAIRE. Units shall be double
deflection supply grilles of aluminum (4004) or steel
(4004S) construction with front vertical blades and rear
horizontal blades. The units shall be size and quantity as
outlined in the plans and specifications. Border shall be
1 1/4"wide with aerodynamically shaped deflector blades
on 2/3" center. Deflector blades shall be individually
applications and be provided with screw holes in the

REGISTERS
GRILLES &
4000 MODEL NUMBER SPECIFICATION

SINGLE/DOUBLE DEFLECTION SURFACE MOUNT
Model Neck
V4002-1 Al. - Vertical Blade - Single Def. 6 8 10 12 14 16 18 20 22 24 26
H4002-1 Al. - Horizontal Blade - Single Def. 4 X X X X X X X X X X X

V4002S-1 Steel - Vertical Blade - Single Def. 5 X X X X X X X X X X X
H4002S-1 Steel - Horizontal Blade - Single Def. 6 X X X X X X X X X X X
V4004-1 Al. - Vertical Blade - Double Def. 8 X X X X X X X X X X X
H4004-1 Al. - Horizontal Blade - Double Def. 10 X X X X X X X X X X X
V4004S-1 Steel - Vertical Blade - Double Def. 12 X X X X X X X X X X X
H4004S-1 Steel - Horizontal Blade - Double Def. 14 X X X X X X X X X X X
16 X X X X X X X X X X X
4000
Available Finishes Available Accessories

Standard OBD Steel Opposed Blade Damper
01 White OBDA Aluminum Opposed Blade Damper
Optional L9 Equalizing Grid
02 Satin Silver PF Plaster Frame
03 Black LIPF Lay-In Plaster Frame
24 Mill (Al. Construction Only) TR Square to Round Transition
28 Custom Color TR Deep Deep Square to Round Transition
Options Available Options

NSH No Screw Holes
CM Concealed Mounting
REGISTERS
GRILLES &
SINGLE/DOUBLE DEFLECTION SURFACE MOUNT
Model Neck
V4002-1 Al. - Vertical Blade - Single Def. 28 30 32 34 36 38 40 42 44 46 48
H4002-1 Al. - Horizontal Blade - Single Def. 4 X X X X X X X X X X X
V4002S-1 Steel - Vertical Blade - Single Def. 5 X X X X X X X X X X X
H4002S-1 Steel - Horizontal Blade - Single Def. 6 X X X X X X X X X X X
V4004-1 Al. - Vertical Blade - Double Def. 8 X X X X X X X X X X X
H4004-1 Al. - Horizontal Blade - Double Def. 10 X X X X X X X X X X X
V4004S-1 Steel - Vertical Blade - Double Def. 12 X X X X X X X X X X X
H4004S-1 Steel - Horizontal Blade - Double Def. 14 X X X X X X X X X X X
4000

03 Black LIPF Lay-In Plaster Frame
Options Available Options

NSH No Screw Holes

REGISTERS
GRILLES &

SINGLE/DOUBLE DEFLECTION LAY-IN
Model Neck
V4002-6 Al. - Vertical Blade - Single Def. 6 8 10 12 14 16 18 20 22 24 Module
H4002-6 Al. - Horizontal Blade - Single Def. 4 X X

V4002S-6 Steel - Vertical Blade - Single Def. 6 X X
12 x 12
H4002S-6 Steel - Horizontal Blade - Single Def. 8 X X
V4004-6 Al. - Vertical Blade - Double Def. 10 X
H4004-6 Al. - Horizontal Blade - Double Def. 4 X X X X X X X X
V4004S-6 Steel - Vertical Blade - Double Def. 6 X X X X X X X X
24 x 12
H4004S-6 Steel - Horizontal Blade - Double Def. 8 X X X X X X X X
10 X
4 X X X X X X X X
6 X X X X X X X X
8 X X X X X X X X
10 X X X X X X X X
12 X X X X X X X X
24 x 24
4000
14 X X X X X X X X
16 X X X X X X X X
18 X X X X X X X X
20 X X X X X X X X
22 X
4 X X X X X X X X X X
48 x 24

02 Satin Silver TBPF T-bar Plaster Frame
03 Black IS Insect Screen
REGISTERS
GRILLES &
Model Neck
V4002-6 Al. - Vertical Blade - Single Def. 26 28 30 32 34 36 38 40 42 44 46 Module
H4002-6 Al. - Horizontal Blade - Single Def. 4 X X X X X X X X X X
V4002S-6 Steel - Vertical Blade - Single Def. 6 X X X X X X X X X X
H4002S-6 Steel - Horizontal Blade - Single Def. 8 X X X X X X X X X X
V4004-6 Al. - Vertical Blade - Double Def. 10 X X X X X X X X X X
H4004-6 Al. - Horizontal Blade - Double Def. 12 X X X X X X X X X X
48 x 24
V4004S-6 Steel - Vertical Blade - Double Def. 14 X X X X X X X X X X
H4004S-6 Steel - Horizontal Blade - Double Def. 16 X X X X X X X X X X
22 X

4000

REGISTERS
GRILLES &

Model Neck
V4002-6 Al. - Vertical Blade - Single Def. 6 8 10 12 14 16 18 20 22 24 Module

X X X X X X X X X X
48 x 48
24
4000
46

Options
REGISTERS
GRILLES &
Model Neck
V4002-6 Al. - Vertical Blade - Single Def. 26 28 30 32 34 36 38 40 42 44 46 Module
X X X X X X X X X X
48 x 48
24
4000
46 X

Options

REGISTERS
GRILLES &

SINGLE DEFLECTION MULTI-SHUTTER DAMPER
V4002M-1 Aluminum - Vertical Blade 6 8 10 12 14 16 18 20 22 24 Standard
H4002M-1 Aluminum - Horizontal Blade 4 X X X X X X X X X X 01 White

V4002SM-1 Steel - Vertical Blade 5 X X X X X X X X X X Optional
H4002SM-1 Steel - Horizontal Blade 6 X X X X X X X X X X 02 Satin Silver
8 X X X X X X X X X X 03 Black
10 X X X X X X X X X X 24 Mill (Al. Construction Only)
12 X X X X X X X X X X 28 Custom Color
4000
REGISTERS
GRILLES &
SERIES 4000 PERFORMANCE DATA
MODELS H/V4002, H/V4004, H/V4002M, H/V4002S, H/V4004S, H/V4002SM
Size
CFM 6x4 8x4 10 x 4 8x6 10 x 6 12 x 6 10 x 8 12 x 8 18 x 6 16 x 8 24 x 6 20 x 8 28 x 6 30 x 6 NC
Velocity 300 225
Ps .011 .006
50
Throw 12-9-7 11-8-6
Velocity 600 450 360 300 240 200

100
Ps .044 .025 .016 .011 .007 .005
Throw 20-14-11 18-13-10 16-12-9 15-11-9 14-10-8 13-10-7

Velocity 900 675 540 450 360 300 270 225 200
150
Ps .099 .056 .036 .025 .016 .011 .009 .006 .005
Throw 26-18-14 23-17-13 22-15-12 20-14-11 19-13-10 18-13-10 17-12-9 16-11-9 15-11-9
Velocity 900 720 600 480 400 360 300 267 225 200
200
Ps .099 .064 .044 .028 .020 .016 .011 .009 .006 .005
Throw 28-20-16 26-19-14 25-18-14 23-16-13 22-15-12 21-15-11 20-14-11 19-13-10 18-13-10 17-12-9
20
Velocity 750 600 500 450 375 333 281 250 225 214 200
4000
250
Ps .069 .044 .031 .025 .017 .014 .010 .008 .006 .006 .005
Throw 29-20-16 27-19-15 25-18-14 24-17-13 23-16-13 22-16-12 21-15-11 20-14-11 19-14-11 19-13-10 18-13-10
Velocity 900 720 600 540 450 400 338 300 270 257 240
300
Ps .099 .064 .044 .036 .025 .020 .014 .011 .009 .008 .005
Throw 33-23-18 30-21-17 28-20-16 27-19-15 26-18-14 25-18-14 23-17-13 22-16-12 22-15-12 22-15-12 18-13-11
Velocity 800 720 600 533 450 400 360 343 320
400
Ps .079 .064 .044 .035 .025 .020 .016 .014 .013
Throw 35-25-19 33-24-18 31-22-17 33-23-18 28-20-16 27-19-15 26-19-14 26-18-14 25-18-14
Velocity 750 667 563 500 450 429 400

500
Ps .069 .055 .039 .031 .025 .023 .020
Throw 37-26-20 35-25-19 33-23-18 32-23-17 31-22-17 30-21-17 29-21-16
Velocity 900 800 675 600 540 514 480

600
Ps .099 .079 .056 .044 .036 .032 .028
Throw 41-29-23 40-28-22 38-27-21 36-26-20 35-25-19 34-24-19 33-24-18
Velocity 787 700 630 600 560

700
Ps .076 .060 .049 .044 .038
Throw 42-30-23 40-28-22 39-27-21 38-27-21 36-26-20
NC 30-35 20-25

REGISTERS
GRILLES &

Size
CFM 30 x 8 16 x 16 24 x 12 30 x 10 18 x 18 28 x 12 20 x 18 24 x 16 40 x 10 30 x 14 36 x 12 24 x 20 42 x 12 48 x 12
Velocity 210
350
Ps .005
Throw 21-15-12
Velocity 240 225 200
400
Ps .007 .006 .005
Throw 23-16-13 22-16-12 22-15-12

Velocity 270 253 225 216 200
450
Ps .009 .008 .006 .006 .005
Throw 25-18-14 24-17-13 23-17-13 23-16-13 22-16-12

Velocity 300 281 250 240 222 214 200
500
Ps .011 .010 .008 .007 .006 .006 .005
Throw 27-19-15 26-19-14 25-18-14 25-18-14 24-17-13 24-17-13 23-17-13

Velocity 360 338 300 288 267 257 240 225 216 206 200
4000
600
Ps .016 .014 .011 .010 .009 .008 .007 .006 .006 .005 .005
Throw 30-21-17 30-21-16 28-20-16 28-20-15 27-19-15 27-19-15 26-19-14 26-18-14 25-18-14 25-18-14 25-18-14
Velocity 390 366 325 312 289 279 260 244 234 223 217
650
Ps .019 .016 .013 .012 .010 .010 .008 .007 .007 .006 .006
Throw 32-23-18 31-22-17 30-21-16 30-21-16 29-20-16 28-20-16 28-20-15 27-19-15 27-19-15 26-19-14 26-19-14
Velocity 480 450 400 384 356 343 320 300 288 274 267 240 229 200
800
Ps .028 .025 .020 .018 .016 .014 .013 .011 .010 .009 .009 .007 .006 .005
Throw 37-26-20 36-26-20 35-25-19 34-24-19 33-24-18 33-23-18 32-23-18 31-22-17 31-22-17 30-22-17 30-21-17 29-21-16 29-20-16 27-19-15
Velocity 600 563 500 480 444 429 400 375 360 343 333 300 286 250
1000
Ps .044 .039 .031 .028 .024 .023 .020 .017 .016 .014 .014 .011 .010 .008
Throw 43-31-24 42-30-23 40-29-22 40-28-22 39-28-21 38-27-21 37-27-21 37-26-20 36-26-20 35-25-19 35-25-29 34-24-19 33-24-18 32-23-17
Velocity 720 675 600 576 533 514 480 450 432 411 400 360 343 300
1200
Ps .064 .056 .044 .041 .035 .032 .028 .025 .023 .021 .020 .016 .014 .011
Throw 49-35-27 48-34-26 46-33-25 45-32-25 44-31-24 43-31-24 42-30-23 41-29-23 41-29-22 40-29-22 40-28-22 38-27-21 38-27-21 36-26-20
Velocity 840 787 700 672 662 600 560 525 504 480 467 420 400 350
1400
Ps .087 .076 .060 .055 .047 .044 .038 .038 .031 .028 .027 .022 .020 .015
Throw 54-39-30 53-38-29 52-36-28 50-36-28 49-35-27 48-34-27 47-34-26 47-34-26 46-32-25 45-32-25 44-31-24 43-30-24 42-30-23 38-27-21
NC 30-35 20-25 20
REGISTERS
GRILLES &
Size
Velocity 214 200
1000
Ps .006 .005
Throw 30-21-17 29-21-16
Velocity 257 240 225 200

1200
Ps .008 .007 .006 0.005
Throw 34-24-19 33-24-18 33-23-18 31-22-17
Velocity 300 280 263 233 224 210

1400
Ps .011 .010 .008 .007 .006 .005
Throw 38-27-21 37-26-20 36-26-20 35-25-19 34-24-19 34-24-18
Velocity 343 320 300 267 256 240 218 213 200 213
1600
Ps .014 .013 .011 .009 .008 .007 .006 .006 .005 .006
Throw 42-30-23 41-29-22 40-28-22 38-27-21 38-27-21 37-26-20 36-25-20 35-25-19 35-25-19 35-25-19
Velocity 386 360 338 300 288 270 245 240 225 240 208 203 200
4000
1800
Ps .018 .016 .014 .011 .010 .009 .007 .007 .006 .007 .005 .005 .005
Throw 45-32-26 44-31-24 43-31-24 41-29-23 41-29-22 40-28-22 39-27-21 38-27-21 38-27-21 38-27-21 37-26-20 26-26-20 36-26-20
Velocity 429 400 375 333 320 300 273 267 250 267 231 225 222 200
2000
Ps .023 .020 .017 .014 .013 .011 .009 .009 .008 .009 .007 .006 .006 .005
Throw 49-35-27 48-34-26 46-33-26 45-32-25 44-31-24 43-31-24 42-30-23 41-29-23 40-29-22 41-29-23 39-28-22 39-28-21 39-28-21 37-27-21
Velocity 471 440 413 367 352 330 300 293 275 293 254 248 244 220
2200
Ps .027 .024 .021 .016 .015 .013 .011 .011 .009 .011 .008 .008 .007 .006
Throw 52-37-29 51-36-28 50-35-27 48-34-26 47-33-26 46-33-25 44-32-24 44-31-24 43-31-24 44-31-24 42-30-23 42-30-23 41-29-2 40-28-22
Velocity 514 480 450 400 384 360 327 320 300 320 277 270 267 240
2400
Ps .032 .028 .025 .020 .018 .016 .013 .013 .011 .013 .009 .009 .009 .007
Throw 55-39-30 54-38-30 53-37-29 51-36-28 50-35-24 49-35-27 47-34-26 47-33-26 46-33-25 47-33-26 45-32-25 44-31-24 44-31-24 42-30-23
Velocity 557 520 488 433 416 390 355 347 325 347 300 292 289 260
2600
Ps .038 .033 .029 .023 .021 .019 .015 .015 .013 .015 .011 .010 .010 .008
Throw 58-41-32 57-40-31 56-40-31 53-38-29 53-37-29 52-37-28 50-35-27 50-35-27 48-34-27 50-35-27 47-33-26 49-33-26 47-33-26 45-32-25
NC 25-30 20-25 <20

REGISTERS
GRILLES &

Size
Velocity 600 560 525 467 448 420 382 373 350 373 323 315 311 280
2800
Ps .044 .038 .034 .027 .025 .022 .018 .017 .015 .017 .013 .012 .012 .010
Throw 61-44-34 60-43-33 59-42-32 56-40-31 55-39-31 54-39-30 53-37-29 52-37-29 51-36-28 52-37-29 50-35-27 49-35-27 49-35-27 47-34-26
Velocity 643 600 563 500 480 450 409 400 375 400 346 338 333 300
3000
Ps .051 .044 .039 .031 .028 .025 .021 .020 .017 .020 .015 .014 .014 .011
Throw 64-46-35 63-45-35 61-44-34 59-42-32 58-41-32 57-40-31 55-39-30 55-39-30 53-38-29 55-39-30 52-37-29 52-37-28 51-36-28 50-35-27
Velocity 729 680 637 567 544 510 464 453 425 453 392 383 378 340
3400
Ps .065 .057 .050 .039 .036 .032 .026 .025 .022 .025 .019 .018 .018 .014
Throw 70-50-38 68-48-38 67-47-37 64-46-35 63-45-35 62-44-34 60-43-33 60-42-33 58-41-32 60-42-33 57-40-31 56-40-31 56-40-31 54-38-30
Velocity 814 760 712 633 608 570 518 507 475 507 438 428 422 380
3800
Ps .081 .071 .062 .049 .045 .040 .033 .031 .028 .031 .024 .022 .022 .018
Throw 75-53-41 74-52-40 72-51-40 69-49-38 68-48-38 67-47-37 65-46-36 64-46-35 63-45-35 64-46-35 61-43-34 61-43-33 60-43-33 58-41-32
Velocity 900 840 787 700 672 630 573 560 525 560 485 472 467 420
4000
4200
Ps .099 .087 .076 .060 .055 .049 .040 .038 .034 .038 .029 .027 .027 .022
Throw 80-57-44 79-56-43 77-55-42 77-55-42 73-52-40 71-51-39 69-49-38 69-49-38 67-48-37 69-49-38 65-46-36 65-46-36 65-46-36 60-43-33
NC 25-30 20-25 <20
PERFORMANCE NOTES FOR SERIES 4000

All data is tested in accordance with ANSI/ASHRAE 70-2006.
DEFINITION OF UNITS
CFM Cubic Feet per Minute (air)
fpm Velocity of air stream in Feet per Minute
Ps Static pressure = PtPv (inches of water column)
NC Noise criterion, sound pressure level NC ratings are based on sound power
level (Lw) re: 10-12 watts minus a 10dB room attenuation in all octave bands
REGISTERS
GRILLES &
MODEL 4000-AF
The 4000-AF series is METALAIREs premier product,
offering superior construction and high performance with
aerodynamic airfoil blades. The 4000-AF is available in
aluminum (4000-AF) and steel (4000S-AF) construction.
It is also available in single deflection (4002-AF/4002S-AF)
and double deflection (4004-AF/4004S-AF).
Available with either vertical or horizontal front blades
Fully adjustable blades assembled on 2/3" center
Extruded aluminum airfoil blades
Optional opposed blade damper available in steel (OBD) or aluminum (OBDA)
Model: H4002-AF-1 - Single Deflection Grille

With Horizontal Blades
Model:
4000-AF
H4002-AF-1 - Single Deflection Grille
With Horizontal
With Horizontal
With Blades
Blades
Horizontal 9
ListedBlades
Size 16
Listed Size - 2 1
Horizontal Listed
ListedSize
Size
Listed Size 13
4
999
16
Deflection Blades 16
16
Listed Size -21- 1 1
Horizontal
Horizontal
Horizontal Listed Size
Listed Size 2- 2 113 33
4144
Deflection Blades
Deflection Blades
Deflection Blades 3
Mounting Holes 16 Diameter
5 1
14
32 (Countersunk) 333
Mounting
Mounting Holes 16
Mounting Holes
Holes Diameter
16Diameter
16 Diameter
5 5 5 11 11 1 Listed Size + 2
3232 32
14 4 4 Front View
(Countersunk)
(Countersunk)
(Countersunk)
Listed
Listed
Listed Size
+ +2 2+ 2
Size
Size (Horizontal
Front
Blades)
Front View
Front View
View
(Horizontal Blades)
(Horizontal
(Horizontal Blades)
Blades)
Model: V4002-AF-1 - Single Deflection Grille 3
With Vertical
Model: V4002-AF-1Blades- Single Deflection Grille
.666 4
Model:
Model: V4002-AF-1
V4002-AF-1 - Single
- Single Deflection
Deflection Grille
Grille 33
WithWith Vertical
Vertical Blades
Blades
.666
.666
.666 43
4
With Vertical Blades 4
Listed Size 9
Listed
Listed Size
Size1 9 16
Vertical Listed
Listed Size
Size-2
1 13 169
9
Deflection Blades Vertical Listed Size 1- 4 16
16
Vertical
Vertical 1
Listed Size - 2- 2 2
Listed Size 133
Deflection
Deflection
Blades
Blades
Deflection Blades
113
44
4
3
5 1 .666 3 Mounting Holes3 16 Diameter
14 1 Mounting Holes 16
3 Diameter
32 5 5 11 4
.666
.666 43 3 (Countersunk)
Mounting
Mounting Holes 3
Holes 16 Diameter
16 Diameter
5 32 11 4 .666+ 2 3 4 (Countersunk)
14 Listed Size 4 (Countersunk)
3232 Listed Size + 2 4 Front View
(Countersunk)
Front View
Listed Size + 2 Front View
(VerticalView
Blades)
Listed Size + 2 Front
(Vertical Blades)
(Vertical Blades)
(Vertical Blades)

REGISTERS
GRILLES &
Model: H4002-AF-6 Lay In T-Bar - Single Deflection Grille

Model: With
H4002-AF-6 Lay In T-Bar - Single Horizontal Blades
Deflection Grille
Listed Size = Duct Size
Model: H4002-AF-6 Lay In T-Bar - Single Deflection Grille
Listed Size - 21
Listed Size = DuctHorizontal
Size
Deflection Blades
Listed Size - 21
Model: H4002-AF-6 Lay In T-Bar - Single Deflection Grille 3
14
Horizontal With Horizontal Blades
Deflection Blades Listed Size = Duct Size

5 141
32 - 1
Listed Size 3
2 T-Bar
Listed
1=4Duct- Size
Module
Size
1
Horizontal 4
T-Bar Module 1 Front View
Deflection Blades Listed Size - 2
5 141 Horizontal (Horizontal Blades)
32 Deflection1Blades 134
T-Bar Module - 4 3
Model: V4002-AF-6 Lay In T-Bar - Single Deflection Grille 14
5 141 T-Bar Module With Vertical Blades Front View
32 5 1 141 (Horizontal Blades)
T-Bar Module
32 - 4
T-Bar Module - 41
T-Bar Module ListedT-Bar
Size Module
= Duct Size Front View
Model: V4002-AF-6 Lay In T-Bar - Single Deflection Grille Front View
Listed Size - 21 (Horizontal Blades) (Horizontal Blades)
With Vertical Blades Vertical
Deflection Blades
Model: V4002-AF-6 Lay In T-Bar - SingleV4002-AF-6
Model: DeflectionLay Grille
In T-Bar - Single Deflection Grille 3
14
With Vertical Blades With Vertical Blades
Listed Size =5 Duct Size 1
14
32 - 1 3
Listed Size 2 T-Bar Module - 41 .666
Vertical Listed Size = Duct Size 4
Deflection Blades Listed Size = Duct Size T-Bar Module
Listed Size - 21
Front View
Listed Size - 21 Vertical (Vertical Blades)
Vertical Deflection Blades 134
134
4000-AF
Deflection Blades
5 141 134
32 5 141 3
T-Bar Module
32 - 41 .666 3
T-Bar Module - 41 .666 4
5 141 T-Bar Module T-Bar Module Front View
4
32 Front
3 View
T-Bar Module - 41 .666
(Vertical Blades) (Vertical
4 Blades)
T-Bar Module Front View
(Vertical Blades)
Model:
Model: H4004-AF-1
H4004-AF-1 ( DoubleDeflection
( Double Deflection Grille
Grille )
3 3
Mounting Holes
Mounting 16 Diameter
Holes
( HorizontalFront
( Horizontal Front Blades
Blades ) 16 Diameter
Model: H4004-AF-1 ( Double Deflection
Listed Grille )
Size (Countersunk)
(Countersunk)
Model: H4004-AF-1 ( DoubleListed Size
Deflection Grille ) 3
Mounting Holes3 16 Diameter
- 11 )
( Horizontal Front Horizontal
Listed SizeBlades
( Horizontal
Listed Front
Size Blades
- 2 ) Deflection
Vertical Mounting Holes 16 Diameter
Listed Size 2 DeflectionBlades
Blades (Countersunk)
(Countersunk)
Listed Size1 Horizontal & Vertical
Listed Size 1
Listed Size- -22
Deflection
15 Blades
Deflection
15
1116 Blades
16
5
5 32
1
11 4 .666 11 15
15
14 .666 16
16 3
32 4 3 Face View
5 5 11 Listed Size + 2 4 ( DoubleFace View )
Deflection
14
14 .666
Listed Size
.666+ 2 ( Double Deflection
3232 33 ( Horizontal Front
Face Blades ) )
View
44 Face
( Horizontal View
Front Blades )
Listed Size
Size+Grille
+22 )
Model: V4004-AF-1 ( DoubleListed
Deflection ( Double
( Double Deflection
Deflection
Mounting Holes 16 3 ) )
Diameter
Model: V4004-AF-1 ( Double Deflection
( Vertical Front Grille
Blades) ) ( Mounting
Horizontal
( Horizontal Front
Front
Holes 3 Blades
Blades ) )
Diameter
(Countersunk) 16
( Vertical Front Blades ) (Countersunk)
Model:
Model: V4004-AF-1
V4004-AF-1 ( DoubleDeflection
( Double DeflectionGrille
Grille) ) Mounting
MountingHoles 3 3
Diameter
Holes1616 Diameter
( Vertical
( Vertical Front
Front
Listed Blades))
Blades
Size (Countersunk)
(Countersunk)
Listed Size- 1
ListedSize Horizontal & Vertical
Listed Size -212 Deflection
HorizontalBlades
& Vertical
Listed
Listed Size
Size
1
Size- -12 Deflection &Blades
ListedSize
Listed 1 15
Horizontal
Horizontal
16
& Vertical
Vertical
2 Deflection
15
Deflection Blades
Blades 3
1 1
5 14 .666 16
15 4 Face View
3
32 1 11 15
16 ( Double Deflection )
5 14 .666+ 2
Listed Size 16 3 4 Face View
32 5 43
( Vertical Front Blades )
5 32 11 .666 4 ( Double
Face View Deflection )
Face View
144 .666+ 2
Listed Size ( (Double
Vertical Deflection )
Front Blades )
32 Listed Size + 2 ( Double Deflection )
Model: H4004D-AF-1 OBDListed Size
( Double +2
Deflection Register ) ( Vertical
Model: V4004D-AF-1 Front Blades )
( Vertical Front Blades ) Register )
OBD ( Double Deflection
( Horizontal Front Blades ) ( Vertical Front Blades )
Model: H4004D-AF-1 With
OBD Opposed
( Double Blade
Deflection
DamperRegister ) Model: V4004D-AF-1
With OBDOpposed ( Double
BladeDeflection
Damper Register )
Model: H4004D-AF-1 OBD ( Double Deflection Register ) Model: V4004D-AF-1 OBD ( Double Deflection
Blades )Register )
Model: H4004D-AF-1( Horizontal
OBD (
( Horizontal
Front
Double Blades )Register
Deflection
Front ) Model: V4004D-AF-1 ( OBD
Vertical( Front
Double Deflection Register )
With Opposed SizeBlades
Blade
Listed )
Damper ( Vertical
With Front
Listed Size Blades )
Opposed Blade Damper
( Horizontal Front Blades )
With Opposed Blade1 Damper ( Vertical
With Opposed Front 1 Blades )
ListedBlade
Size - 16 Listed Size - Blade Damper
With Opposed Damper With Opposed 16Blade Damper
Listed Size
Damper Operator
Listed Size 1 1 Damper Operator
Listed
ListedSize
(Screwdriver - 161
Slot) Size
Listed Size1 - 16
GR28 Options:
Size
Listed Size - 16 Options:
Metal Industries, Inc. For complete Listed
product specifications and submittal Size
data, visit -us
1
(Screwdriver
16at www.metalaire.com Slot)
Damper 1
ListedOperator
Damper Size - 16
Operator
Listed Size - 16
Damper Operator
Opposed Blades (Screwdriver Slot) Opposed Blades Damper Operator
16 16
( Vertical Front Blades( )Vertical Front Blades ) (Countersunk) (Countersunk)

1
Listed Size - 2 Listed Size - 2
Horizontal 1& Vertical Horizontal & Vertical
REGISTERS
GRILLES &
1 15
16 1 15
16
3 3
5 1
14 5 1
.666 1 4 .666
4 4
Face View Face View
32 32 ( Double Deflection ) ( Double Deflection )
Listed Size + 2 Listed Size + 2 ( Vertical Front Blades( )Vertical Front Blades )
Model: H4004D-AF-1 OBD

Model:
( Double
H4004D-AF-1
Deflection
OBD Register
( Double
) Deflection RegisterModel:
) V4004D-AF-1 OBD
Model:
( Double
V4004D-AF-1
Deflection
OBD
Register
( Double
) Deflection Register )
( Horizontal Front Blades
( Horizontal
) Front Blades ) ( Vertical Front Blades( )Vertical Front Blades )

1 1 1 1
Listed Size - 16 Listed Size - 16 Listed Size - 16 Listed Size - 16
Damper Operator Damper Operator Damper Operator Damper Operator

(Screwdriver Slot) (Screwdriver Slot) (Screwdriver Slot) (Screwdriver Slot)
Options: Options: Options: Options:
Opposed Blades Opposed Blades Opposed Blades Opposed Blades
Damper Damper 3 15
16 3 15
Damper16 Damper 3 15 3 15
16 16
5 5 1
32 32 .666 .666 5
32
14 5
32
.666 1 41 .666
Listed Size + 2 Listed Size + 2 Listed Size + 2 Listed Size + 2
4000-AF

REGISTERS
GRILLES &
Model: H4002S-AF-6 Lay In T-Bar - Single Deflection Grille

Model: H4002S-AF-6 Lay
With Horizontal In T-Bar - Single Deflection Grille
Blades 3
With Horizontal Blades Mounting Holes 16 Diameter
3
Mounting Holes 16
(Countersunk) Diameter
(Countersunk)
Listed Size = Duct1Size
Listed Size - 2
Horizontal Listed Size - 21

Horizontal
Deflection Blades 9
Deflection Blades 134 16
9
134 16
5 141
32
5 Front View
141 T-Bar Module - 41 Front View
32 (Horizontal Blades)
T-Bar Module - 41
T-Bar Module (Horizontal Blades)
T-Bar Module
Model: V4002S-AF-6 Lay In T-Bar - Single Deflection Grille

Model: V4002S-AF-6 Lay In T-Bar - Single Deflection Grille
With Vertical Blades 3
3
With Vertical Blades Mounting
(Countersunk) 16 Diameter
Holes
(Countersunk)
ListedListed
Size Size
= Duct 9
- 21Size 16
9
Vertical Listed Size - 21 16
DeflectionVertical
Blades
4000-AF
Deflection Blades 134

134
5 141 .666 3
32
5 141 34
T-Bar Module - 41 .666
32 Front View 4
T-Bar Module - 41
T-Bar Module Front View
T-Bar Module
(Vertical Blades)
(Vertical Blades)
Model: V4004S-AF-1 ( Double Deflection Grille - Vertical Front Blades ) Front View ( Double Deflection )
( Vertical Front Blades )
3
Vertical (Countersunk)
Horizontal Listed Size Deflection
Deflection
Blades Listed Size - 21 Blades
Listed
11
1 16 Size
+2
5
32 1
14 .666
Listed Size + 2 .666 3
4
Model: H4004S-AF-1 ( Double Deflection Grille - Horizontal Front Blades ) Front View ( Double Deflection )
( Horizontal Front Blades )
3
Vertical
Listed Size Deflection
(Countersunk)
Horizontal
Deflection Listed Size - 21 Blades
Blades
11 Listed
1 16 Size
5 +2
1
14
32
Listed size + 2 3
.666 4
Option: H4004S-AF-1-OBD ( Double Deflection Register ) Option: V4004S-AF-1-OBD ( Double Deflection Register )
( Horizontal Front Blades) ( Vertical Front Blades )

1 1
Damper Operator Damper Operator

Options: Options:
(Screwdriver Slot) (Screwdriver Slot)
GR30 Opposed Blade Metal Industries, Inc. For complete Opposed Blade
product specifications and submittal data, visit us at www.metalaire.com
Damper Damper
3 3
5 5
3
Vertical
Listed Size Deflection
(Countersunk)
Horizontal
Deflection Listed Size - 21 Blades
Blades
Listed
REGISTERS
11
GRILLES &
1 16 Size
5 +2
1
14
32
Listed size + 2 3
.666 4
Option: H4004S-AF-1-OBD ( Double Deflection Register ) Option: V4004S-AF-1-OBD ( Double Deflection Register )
( Horizontal Front Blades) ( Vertical Front Blades )

1 1
Damper Operator Damper Operator

Options: Options:
Opposed Blade Opposed Blade
Damper Damper
3 3
5 5
32 32
1 .666 1 .666
14 14
4000-AF

REGISTERS
GRILLES &
SERIES 4000-AF SPECIFICATIONS

SUPPLY SINGLE DEFLECTION Performance Specification
AIRFOIL BLADE - ALUMINUM/STEEL The manufacturer shall provide published performance
MODEL 4002-AF/4002S-AF data. Data shall be tested in accordance to ANSI/
Air outlets shall be model V4002-AF/V4002S-AF (vertical ASHRAE Standard 70-2006.
front blades) or H4002-AF/H4002S-AF (horizontal front

blades) manufactured by METALAIRE. Units shall be Paint Specification
single deflection supply grilles of aluminum (4002-AF) Process shall be anodic electro-deposition using an
or steel (4002S-AF) construction and a single set of anodic acrylic paint. Units shall undergo pre-treatment
vertical blades. The units shall be size and quantity as including a pressurized spray stage using an alkaline
outlined in the plans and specifications. Border shall be cleaner and a de-ionized water rinse.
1 1/4"wide with aerodynamically shaped deflector blades
on 2/3" center. Deflector blades shall be individually
applications shall be provided with screw holes in the
4000-AF

SUPPLY DOUBLE DEFLECTION

AIRFOIL BLADE - ALUMINUM/STEEL
MODEL 4004-AF/4004S-AF
Air outlets shall be model V4004/V4004S (vertical front
blades) or H4004-AF/H4004S-AF (horizontal front blades)
manufactured by METALAIRE. Units shall be double
deflection supply grilles of aluminum (4004-AF) or
steel (4004S-AF) construction with front vertical blades
and rear horizontal blades. The units shall be size and
quantity as outlined in the plans and specifications.
Border shall be 1 1/4"wide with aerodynamically shaped
deflector blades on 2/3" center. Deflector blades shall
be individually adjustable. Units designed for surface
mounting applications shall be provided with screw holes
in the face of the device. Blades shall pivot in friction
mounting retainers. Retainers shall hold the deflector
blade position throughout the specified operating range
of the device. Metal friction wires are not acceptable.
Optional opposed blade damper shall be constructed
of steel (Model OBD) or aluminum (Model OBDA).
REGISTERS
GRILLES &
SINGLE/DOUBLE DEFLECTION SURFACE MOUNT AIR FOIL BLADE
Model Neck
V4002-AF-1 Al. - Vertical Blade - Single Def. 6 8 10 12 14 16 18 20 22 24 26
H4002-AF-1 Al. - Horizontal Blade - Single Def. 4 X X X X X X X X X X X
V4002S-AF-1 Steel - Vertical Blade - Single Def 5 X X X X X X X X X X X
H4002S-AF-1 Steel - Horizontal Blade - Single Def. 6 X X X X X X X X X X X
V4004-AF-1 Al. - Vertical Blade - Double Def. 8 X X X X X X X X X X X
H4004-AF-1 Al. - Horizontal Blade - Double Def. 10 X X X X X X X X X X X
V4004S-AF-1 Steel - Vertical Blade - Double Def. 12 X X X X X X X X X X X
H4004S-AF-1 Steel - Horizontal Blade - Double Def. 14 X X X X X X X X X X X
4000-AF

03 Black LIPF Lay-in Plaster Frame
24 Mill (Al. Construction Only) IS Insect Screen
28 Custom Color TR Square to Round Transition
TR Deep Deep Square to Round Transition
Options
Available Options
NSH No Screw Holes

REGISTERS
GRILLES &

SINGLE/DOUBLE DEFLECTION SURFACE MOUNT AIR FOIL BLADE
Model Neck
V4002-AF-1 Al. - Vertical Blade - Single Def. 28 30 32 34 36 38 40 42 44 46 48
H4002-AF-1 Al. - Horizontal Blade - Single Def. 4 X X X X X X X X X X X

V4002S-AF-1 Steel - Vertical Blade - Single Def 5 X X X X X X X X X X X
H4002S-AF-1 Steel - Horizontal Blade - Single Def. 6 X X X X X X X X X X X
V4004-AF-1 Al. - Vertical Blade - Double Def. 8 X X X X X X X X X X X
H4004-AF-1 Al. - Horizontal Blade - Double Def. 10 X X X X X X X X X X X
V4004S-AF-1 Steel - Vertical Blade - Double Def. 12 X X X X X X X X X X X
H4004S-AF-1 Steel - Horizontal Blade - Double Def. 14 X X X X X X X X X X X
4000-AF

24 Mill (Al. Construction Only) IS Insect Screen
Options
Available Options
NSH No Screw Holes
REGISTERS
GRILLES &
4000-AF-6 MODEL NUMBER SPECIFICATION
SINGLE/DOUBLE DEFLECTION LAY-IN AIR FOIL BLADE
Model Neck
V4002-AF-6 Al. - Vertical Blade - Single Def. 6 8 10 12 14 16 18 20 22 24 Module
H4002-AF-6 Al. - Horizontal Blade - Single Def. 4 X X
V4002S-AF-6 Steel - Vertical Blade - Single Def. X X
12 x 12
6
H4002S-AF-6 Steel - Horizontal Blade - Single Def. 8 X X
V4004-AF-6 Al. - Vertical Blade - Double Def. 10 X
H4004-AF-6 Al. - Horizontal Blade - Double Def. 4 X X X X X X X X
V4004S-AF-6 Steel - Vertical Blade - Double Def. X X X X X X X X
24 x 12
6
H4004S-AF-6 Steel - Horizontal Blade - Double Def. 8 X X X X X X X X
10 X
4 X X X X X X X X
6 X X X X X X X X
8 X X X X X X X X
10 X X X X X X X X
X X X X X X X X
24 x 24
12
4000-AF
14 X X X X X X X X
16 X X X X X X X X
18 X X X X X X X X
20 X X X X X X X X
22 X
48 x 24


REGISTERS
GRILLES &

Model Neck
V4002-AF-6 Al. - Vertical Blade - Single Def. 6 8 10 12 14 16 18 20 22 24 Module
H4002-AF-6 Al. - Horizontal Blade - Single Def. 4 X X X X X X X X X X

V4002S-AF-6 Steel - Vertical Blade - Single Def. 6 X X X X X X X X X X
H4002S-AF-6 Steel - Horizontal Blade - Single Def. 8 X X X X X X X X X X
V4004-AF-6 Al. - Vertical Blade - Double Def. 10 X X X X X X X X X X
H4004-AF-6 Al. - Horizontal Blade - Double Def. 12 X X X X X X X X X X
V4004S-AF-6 Steel - Vertical Blade - Double Def. 14 X X X X X X X X X X
H4004S-AF-6 Steel - Horizontal Blade - Double Def. 16 X X X X X X X X X X
48 x 48
4000-AF

REGISTERS
GRILLES &
Model Neck
V4002-AF-6 Al. - Vertical Blade - Single Def. 26 28 30 32 34 36 38 40 42 44 46 Module
H4002-AF-6 Al. - Horizontal Blade - Single Def. 4 X X X X X X X X X X
V4002S-AF-6 Steel - Vertical Blade - Single Def. 6 X X X X X X X X X X
H4002S-AF-6 Steel - Horizontal Blade - Single Def. 8 X X X X X X X X X X
V4004-AF-6 Al. - Vertical Blade - Double Def. 10 X X X X X X X X X X
H4004-AF-6 Al. - Horizontal Blade - Double Def.
48 x 24
V4004S-AF-6 Steel - Vertical Blade - Double Def. 14 X X X X X X X X X X
H4004S-AF-6 Steel - Horizontal Blade - Double Def. 16 X X X X X X X X X X
22 X
4000-AF
48 x 48
46 X


REGISTERS
GRILLES &

MODELS H/V4002-AF, H/V4004-AF, H/V4002S-AF, H/V4004S-AF
Size
CFM 6x4 8x4 10 x 4 8x6 10 x 6 12 x 6 10 x 8 12 x 8 18 x 6 16 x 8 24 x 6 20 x 8 28 x 6 30 x 6 NC
Vel 300 225
Ps .011 .006
50
Throw 12-9-7 11-8-6
Vel 600 450 360 300 240 200

100
Ps .044 .025 .016 .011 .007 .005
Throw 20-14-11 18-13-10 16-12-9 15-11-9 14-10-8 13-10-7

Vel 900 675 540 450 360 300 270 225 200
150
Ps .099 .056 .036 .025 .016 .011 .009 .006 .005
Throw 26-18-14 23-17-13 22-15-12 20-14-11 19-13-10 18-13-10 17-12-9 16-11-9 15-11-9
Vel 900 720 600 480 400 360 300 267 225 200
200
Ps .099 .064 .044 .028 .020 .016 .011 .009 .006 .005
Throw 28-20-16 26-19-14 25-18-14 23-16-13 22-15-12 21-15-11 20-14-11 19-13-10 18-13-10 17-12-9
20
Vel 750 600 500 450 375 333 281 250 225 214 200
4000-AF
250
Ps .069 .044 .031 .025 .017 .014 .010 .008 .006 .006 .005
Throw 29-20-16 27-19-15 25-18-14 24-17-13 23-16-13 22-16-12 21-15-11 20-14-11 19-14-11 19-13-10 18-13-10
Vel 900 720 600 540 450 400 338 300 270 257 240
300
Ps .099 .064 .044 .036 .025 .020 .014 .011 .009 .008 .005
Throw 33-23-18 30-21-17 28-20-16 27-19-15 26-18-14 25-18-14 23-17-13 22-16-12 22-15-12 22-15-12 18-13-11
Vel 800 720 600 533 450 400 360 343 320
400
Ps .079 .064 .044 .035 .025 .020 .016 .014 .013
Throw 35-25-19 33-24-18 31-22-17 33-23-18 28-20-16 27-19-15 26-19-14 26-18-14 25-18-14
Vel 750 667 563 500 450 429 400

500
Ps .069 .055 .039 .031 .025 .023 .020
Throw 37-26-20 35-25-19 33-23-18 32-23-17 31-22-17 30-21-17 29-21-16
Vel 900 800 675 600 540 514 480

600
Ps .099 .079 .056 .044 .036 .032 .028
Throw 41-29-23 40-28-22 38-27-21 36-26-20 35-25-19 34-24-19 33-24-18
Vel 787 700 630 600 560

700
Ps .076 .060 .049 .044 .038
Throw 42-30-23 40-28-22 39-27-21 38-27-21 36-26-20
NC 30-35 20-25
REGISTERS
GRILLES &
Size
Vel 210
350
Ps .005
Throw 21-15-12
Vel 240 225 200
400
Ps .007 .006 .005
Throw 23-16-13 22-16-12 22-15-12

Vel 270 253 225 216 200
450
Ps .009 .008 .006 .006 .005
Throw 25-18-14 24-17-13 23-17-13 23-16-13 22-16-12

Vel 300 281 250 240 222 214 200
500
Ps .011 .010 .008 .007 .006 .006 .005
Throw 27-19-15 26-19-14 25-18-14 25-18-14 24-17-13 24-17-13 23-17-13

Vel 360 338 300 288 267 257 240 225 216 206 200
4000-AF
600
Ps .016 .014 .011 .010 .009 .008 .007 .006 .006 .005 .005
Throw 30-21-17 30-21-16 28-20-16 28-20-15 27-19-15 27-19-15 26-19-14 26-18-14 25-18-14 25-18-14 25-18-14
Vel 390 366 325 312 289 279 260 244 234 223 217
650
Ps .019 .016 .013 .012 .010 .010 .008 .007 .007 .006 .006
Throw 32-23-18 31-22-17 30-21-16 30-21-16 29-20-16 28-20-16 28-20-15 27-19-15 27-19-15 26-19-14 26-19-14
Vel 480 450 400 384 356 343 320 300 288 274 267 240 229 200
800
Ps .028 .025 .020 .018 .016 .014 .013 .011 .010 .009 .009 .007 .006 .005
Throw 37-26-20 36-26-20 35-25-19 34-24-19 33-24-18 33-23-18 32-23-18 31-22-17 31-22-17 30-22-17 30-21-17 29-21-16 29-20-16 27-19-15
Vel 600 563 500 480 444 429 400 375 360 343 333 300 286 250
1000
Ps .044 .039 .031 .028 .024 .023 .020 .017 .016 .014 .014 .011 .010 .008
Throw 43-31-24 42-30-23 40-29-22 40-28-22 39-28-21 38-27-21 37-27-21 37-26-20 36-26-20 35-25-19 35-25-29 34-24-19 33-24-18 32-23-17
Vel 720 675 600 576 533 514 480 450 432 411 400 360 343 300
1200
Ps .064 .056 .044 .041 .035 .032 .028 .025 .023 .021 .020 .016 .014 .011
Throw 49-35-27 48-34-26 46-33-25 45-32-25 44-31-24 43-31-24 42-30-23 41-29-23 41-29-22 40-29-22 40-28-22 38-27-21 38-27-21 36-26-20
Vel 840 787 700 672 662 600 560 525 504 480 467 420 400 350
1400
Ps .087 .076 .060 .055 .047 .044 .038 .038 .031 .028 .027 .022 .020 .015
Throw 54-39-30 53-38-29 52-36-28 50-36-28 49-35-27 48-34-27 47-34-26 47-34-26 46-32-25 45-32-25 44-31-24 43-30-24 42-30-23 38-27-21
NC 30-35 20-25 20

REGISTERS
GRILLES &

Size
Vel 214 200

1000
Ps .006 .005
Throw 30-21-17 29-21-16
Vel 257 240 225 200

1200
Ps .008 .007 .006 0.005
Throw 34-24-19 33-24-18 33-23-18 31-22-17
Vel 300 280 263 233 224 210

1400
Ps .011 .010 .008 .007 .006 .005
Throw 38-27-21 37-26-20 36-26-20 35-25-19 34-24-19 34-24-18
Vel 343 320 300 267 256 240 218 213 200 213
1600
Ps .014 .013 .011 .009 .008 .007 .006 .006 .005 .006
Throw 42-30-23 41-29-22 40-28-22 38-27-21 38-27-21 37-26-20 36-25-20 35-25-19 35-25-19 35-25-19
Vel 386 360 338 300 288 270 245 240 225 240 208 203 200
4000-AF
1800
Ps .018 .016 .014 .011 .010 .009 .007 .007 .006 .007 .005 .005 .005
Throw 45-32-26 44-31-24 43-31-24 41-29-23 41-29-22 40-28-22 39-27-21 38-27-21 38-27-21 38-27-21 37-26-20 26-26-20 36-26-20
Vel 429 400 375 333 320 300 273 267 250 267 231 225 222 200
2000
Ps .023 .020 .017 .014 .013 .011 .009 .009 .008 .009 .007 .006 .006 .005
Throw 49-35-27 48-34-26 46-33-26 45-32-25 44-31-24 43-31-24 42-30-23 41-29-23 40-29-22 41-29-23 39-28-22 39-28-21 39-28-21 37-27-21
Vel 471 440 413 367 352 330 300 293 275 293 254 248 244 220
2200
Ps .027 .024 .021 .016 .015 .013 .011 .011 .009 .011 .008 .008 .007 .006
Throw 52-37-29 51-36-28 50-35-27 48-34-26 47-33-26 46-33-25 44-32-24 44-31-24 43-31-24 44-31-24 42-30-23 42-30-23 41-29-2 40-28-22
Vel 514 480 450 400 384 360 327 320 300 320 277 270 267 240
2400
Ps .032 .028 .025 .020 .018 .016 .013 .013 .011 .013 .009 .009 .009 .007
Throw 55-39-30 54-38-30 53-37-29 51-36-28 50-35-24 49-35-27 47-34-26 47-33-26 46-33-25 47-33-26 45-32-25 44-31-24 44-31-24 42-30-23
Vel 557 520 488 433 416 390 355 347 325 347 300 292 289 260
2600
Ps .038 .033 .029 .023 .021 .019 .015 .015 .013 .015 .011 .010 .010 .008
Throw 58-41-32 57-40-31 56-40-31 53-38-29 53-37-29 52-37-28 50-35-27 50-35-27 48-34-27 50-35-27 47-33-26 49-33-26 47-33-26 45-32-25
NC 25-30 20-25 <20
REGISTERS
GRILLES &
Size
Vel 600 560 525 467 448 420 382 373 350 373 323 315 311 280
2800
Ps .044 .038 .034 .027 .025 .022 .018 .017 .015 .017 .013 .012 .012 .010
Throw 61-44-34 60-43-33 59-42-32 56-40-31 55-39-31 54-39-30 53-37-29 52-37-29 51-36-28 52-37-29 50-35-27 49-35-27 49-35-27 47-34-26
Vel 643 600 563 500 480 450 409 400 375 400 346 338 333 300
3000
Ps .051 .044 .039 .031 .028 .025 .021 .020 .017 .020 .015 .014 .014 .011
Throw 64-46-35 63-45-35 61-44-34 59-42-32 58-41-32 57-40-31 55-39-30 55-39-30 53-38-29 55-39-30 52-37-29 52-37-28 51-36-28 50-35-27
Vel 729 680 637 567 544 510 464 453 425 453 392 383 378 340
3400
Ps .065 .057 .050 .039 .036 .032 .026 .025 .022 .025 .019 .018 .018 .014
Throw 70-50-38 68-48-38 67-47-37 64-46-35 63-45-35 62-44-34 60-43-33 60-42-33 58-41-32 60-42-33 57-40-31 56-40-31 56-40-31 54-38-30
Vel 814 760 712 633 608 570 518 507 475 507 438 428 422 380
3800
Ps .081 .071 .062 .049 .045 .040 .033 .031 .028 .031 .024 .022 .022 .018
Throw 75-53-41 74-52-40 72-51-40 69-49-38 68-48-38 67-47-37 65-46-36 64-46-35 63-45-35 64-46-35 61-43-34 61-43-33 60-43-33 58-41-32
Vel 900 840 787 700 672 630 573 560 525 560 485 472 467 420
4000-AF
4200
Ps .099 .087 .076 .060 .055 .049 .040 .038 .034 .038 .029 .027 .027 .022
Throw 80-57-44 79-56-43 77-55-42 77-55-42 73-52-40 71-51-39 69-49-38 69-49-38 67-48-37 69-49-38 65-46-36 65-46-36 65-46-36 60-43-33
NC 25-30 20-25 <20

All data is tested in accordance with ANSI/ASHRAE 70-2006
DEFINITION OF UNITS
Pv Velocity pressure (inches of water column)
Pt Total pressure (inches of water column)
Throw* Non-isothermal horizontal throw (supply air temperature 15F colder than average
room temperature); values are for 150, 100 and 50fpm velocities
Throw Isothermal throw (supply air temperature the same as average room temperature);
values are for 150, 100 and 50fpm velocities
Vel Neck velocity

REGISTERS
GRILLES &
MODEL L
The L series of curved blade grilles and registers is an economical
solutionTag:to applications requiring ceiling or sidewall installations with METAL*AIRE
Series
directional :
air patterns. TheL-SL series is constructed of Submittal
corrosive No: L-S
resistant aluminum.
Supply Curved Blade Ceiling Grilles / Registers
Available in single -orSingle
Aluminum double deflection
Deflection - Surface Mount
Available in 1-way,
Models: L-1 2-way, 3-way or 4-way
Single air patterns
Deflection Grille - One Way - Long Blades
S-1
Full horizontal to Single
vertical blow patternsDeflection Grille - One Way - Short Blades
LT-1 Single Deflection Grille - Two Way - Long Blades
Individually adjustable curved blades
ST-1 Single Deflection Grille - Two Way - Short Blades
LTC-1 blade orSingle
Available with opposed Deflection
multi-shutter Grille - Two Way Corner Blow Pattern
damper
LTC3-1 Single Deflection Grille - Three Way Corner Blow Pattern
LS3-1 Single Deflection Grille - Three Way Blow Pattern
LS4-1 Single Deflection Grille - Four Way Blow Pattern
Models: L-1 (One Way - Long Blades - Surface Mount)
S-1 (One Way - Short Blades - Surface Mount)
Face View ( L-1 Model ) Face View ( S-1 Model )
Curved Blades Specified Duct Size=Listed Size
Parallel to 1
Listed Size -
long dimension 2
Mounting Mounting
L
11 Hole Hole
4
5
32 11 .9
4
Listed Size + 2
5 5
8 8
Models: LT-1 (Two Way - Long Blades - Surface Mount)

ST-1 (Two Way - Short Blades - Surface Mount)
Face View ( LT-1 Model ) Face View ( ST-1 Model )
SpecifiedDuct Size =Listed Size
Number L-S
Curved Blades
1
Parallel to Listed Size - 2
long dimension
Mounting Mounting
11
4 Hole Hole
5
32 11 .9
4
Listed Size + 2
Submittal
Models: LTC-1 (Two Way Corner Blow Pattern - Surface Mount)
LTC3-1 (Three Way Corner Blow Pattern - Surface Mount)
Specified Duct Size = Listed Size Face View ( LTC-1 Model ) Mounting Face View ( LTC3-1 Model ) Mounting
Listed Size - 2
1 Hole Hole
Vertical Curved Blades

5
32 11
4
5
11 .9
8
4
Horizontal Curved Blades 5 5
8 8
Listed Size + 2
Models: LS3-1 (Three Way Blow Pattern - Surface Mount)

LS4-1 (Four Way Blow Pattern - Surface Mount) Face View ( LS3-1 Model ) Face View ( LS4-1 Model )
Specified Duct Size=Listed Size

1
Listed Size - 2
5 Mounting Mounting
32 Hole Hole
1
14
1
1 4 Vertical Curved Blades
Listed Size + 2 5 5
8 8
Note: Arrow shows air blow way.
GR42 Submittal No. L-S Date: 09/01/2003

Metal Industries, Inc.
Dimensions are in inches Page: 1 of 3
For complete product specifications and submittal data, visit us at www.metalaire.com
2003 Metal Industries, Inc. Clearwater, FL All Rights reserved. Printed in U.S.A. (727) 441 - 2651 Fax (727) 443 - 7167 www.metalaire.com [email protected]
Aluminum - Single Deflection - Lay In T-Bar
Models: L-6 Single Deflection Grille - One Way - Long Blades - Lay In T-Bar
S-6 Single Deflection Grille - One Way - Short Blades - Lay In T-bar
LT-6 Single Deflection Grille - Two Way - Long Blades - Lay In T-Bar
REGISTERS
GRILLES &
ST-6 Single Deflection Grille - Two Way - Short Blades - Lay In T-Bar
LTC-6 Single Deflection Grille - Two Way Corner Blow Pattern - Lay In T-Bar
LTC3-6 Single Deflection Grille - Three Way Corner Blow Pattern - Lay In T-Bar
LS3-6 Single Deflection Grille - Three Way Blow Pattern - Lay In T-Bar
LS4-6 Single Deflection Grille - Four Way Blow Pattern - Lay In T-Bar
Models: L-6 (One Way - Long Blades - Lay In T-Bar)
S-6 (One Way - Short Blades - Lay In T-Bar)
T-Bar Module
Face View ( L-6 Model ) Face View ( S-6 Model )
Curved Blades Specified Duct Size=Listed Size
Parallel to 1
Listed Size -
long dimension 2
1
1
4
1
1 .9
4
1
Overal Face = T-Bar Module - 4
Models: LT-6 (Two Way - Long Blades - Lay In T-Bar)

ST-6 (Two Way - Short Blades - Lay In T-Bar) Face View ( LT-6 Model ) Face View ( ST-6 Model )
T-Bar Module
Curved Blades SpecifiedDuct Size =Listed Size
Parallel to Listed Size -
1
Number L-S
2
long dimension
1
1
4
1
14 .9
1
Models: LTC-6 (Two Way Corner Blow Pattern - Lay In T-Bar)
Submittal
LTC3-6 (Three Way Corner Blow Pattern - Lay In T-Bar)
T-Bar Module
L
Specified Duct Size = Listed Size
Face View ( LTC-6 Model ) Face View ( LTC3-6 Model )
Listed Size - 12
11
4
5
1 41 .9 8
Horizontal Curved Blades
Models: LS3-6 (Three Way Blow Pattern - Lay In T-Bar)

LS4-6 (Four Way Blow Pattern - Lay In T-Bar) Face View ( LS3-6 Model ) Face View ( LS4-6 Model )
T-Bar Module
Listed Size - 21
1 1
4
1 14 Vertical Curved Blades

1
Overall Face = T-Bar Module -
4
Submittal No. L-S Date: 01/03/2005 Dimensions are in inches Page: 2 of 3


REGISTERS
GRILLES &
Models: LM-1 (Supply Register - One Way - Long Blades)

SM-1 (Supply Register - One Way - Short Blades)
Specified Duct Size

Specified Duct Size - 3 Multi-Shutter Damper
8 5
Duct By Others Mounted at Right Angle 8
to Curved Blades
Shutter Blade
(Blades on 1" Centers)
Curved Blades
( Horizontal )
3
18
5 1
32 14 .9
Damper Operator
Face View ( LM-1 Model ) Face View ( SM-1 Model )
Listed Size + 2
Models: LTM-1 (Supply Register - Two Way - Long Blades)

STM-1 (Supply Register - Two Way - Short Blades)
Specified Duct Size Multi-Shutter Damper

Mounted at Right Angle to
Specified Duct Size - 38 Curved Blades
Duct By Others
( Blades on 1" Centers )
Shutter Blade
Curved Blades
L
( Horizontal ) 7
18
5 1
32 14 .9
Listed Size + 2 Damper Operator
Face View ( LTM-1 Model ) Face View ( STM-1 Model )
Models: LTCM-1 (Supply Register - Two Way - Horizontal Multi-Shutter Damper)

LTC3M-1 (Supply Register - Three Way - Horizontal Multi-Shutter Damper)
Specified Duct Size=

Listed Size
Specified Duct Size - 38 Duct By Others
Shutter Multi-Shutter Damper

Vertical
Curved Blades Blade
5 1
22
32 17
8
1
14 Damper 5
Operator 8
.9
Face View ( LTCM-1 Model ) Face View ( LTC3M-1 Model )
Listed Size + 2
NOTE: Arrow shows air blow way.
Note: Available in sizes 6 x 6, 8 x 8, 10 x 10, 12 x 12, 14 x 14 Only.
Models: LMH-1 (Supply Register - One Way - Long Blades with Horizontal Multi-Shutter Damper)
LTMH-1 (Supply Register - Two Way - Long Blades with Horizontal Multi-Shutter Damper)
Duct Size = Listed Size Face View ( LMH-1 Model ) Face View ( LTMH-1 Model )
Listed Size - 38
5 115
16
116
5
32
1
14 5
8
Listed Size + 2
Only Available in Sizes: 6 x 4, 8 x 4, 10 x 4, 12 x 4, 14 x 4, 6 x 6, 8 x 6, 10 x 6, 12 x 6,

14 x 6, 8 x 8, 10 x 8, 12 x 8, 14 x 8, 10 x 10 and 12 x 12
Models: LS3M-1 (Supply Register - Three Way - Corner Blow Pattern with Horizontal Multi-Shutter Damper)
LS4M-1 (Supply Register - Four Way - Corner Blow Pattern with Horizontal Multi-Shutter Damper)
116 16
5
32
1
14 5
8
REGISTERS
Listed Size + 2
GRILLES &
Only Available in Sizes: 6 x 4, 8 x 4, 10 x 4, 12 x 4, 14 x 4, 6 x 6, 8 x 6, 10 x 6, 12 x 6,
14 x 6, 8 x 8, 10 x 8, 12 x 8, 14 x 8, 10 x 10 and 12 x 12
Models: LS3M-1 (Supply Register - Three Way - Corner Blow Pattern with Horizontal Multi-Shutter Damper)
LS4M-1 (Supply Register - Four Way - Corner Blow Pattern with Horizontal Multi-Shutter Damper)

Face View ( LS3M-1 Model ) Face View ( LS4M-1 Model )
Specified Duct Size - 38
Multi-Shutter Shutter Blade
Damper
5 1
22
32 17
8
1 Damper Operator
14
Listed Size + 2
NOTE: Arrow shows air blow way.
Note: Available in sizes 6 x 6, 8 x 8, 10 x 10, 12 x 12, 14 x 14 Only.
Models: LV-1 (One Way - Long Front Blades - Rear Horizontal Blades)
SH-1 (One Way - Short Front Blades - Rear Vertical Blades)

Listed Size -21 Face View ( LV-1 Model ) Face View ( SH-1 Model )
.9
5 5 17
32 8 8
Rear Deflection Blades
L
Perpendicular to Direction Curved Blades 5
1
14 Of Front Curved Blades 8
Parallel to
Listed Size + 2 Short dimension
Models: LTV-1 (Two Way - Long Front Blades - Rear Vertical Blades)
STH-1 (Two Way - Short Front Blades - Rear Horizontal Blades)
Face View ( LTV-1 Model )
Listed Size - 21 Face View ( STH-1 Model )
Rear Deflection Blades
Perpendicular to Direction
Of Front Curved Blades Curved Blades
5 Parallel to
32 Short dimension
1
14 .9
Listed Size + 2 Model LTVD-1 Shown
Options: OBD/OBDA 1
Listed Size - 16 Options:
Blade Opposed Blade Damper

Bearing
1 Damper Operator
12 (Screwdriver Slot)
21
8
TR Transition Square / Rectangular
Height 3 38
To Round 1 78
1 5
14 .9 32
Listed Size + 2

REGISTERS
GRILLES &
SERIES L SPECIFICATIONS
SUPPLY CURVED BLADE ALUMINUM Performance Specification
MODELS L/S/LT/ST/LTC/LTC3/LS3/ The manufacturer shall provide published performance
LS4/LM/SM/LV/SH/LTV/STH data. Data shall be tested in accordance to ANSI/
Air inlets shall be models L/S/LT/ST/LTC/LTC3/LS3/LS4/ ASHRAE Standard 70-2006.
LM/SM/LV/SH/LTV/STH manufactured by METALAIRE.

Units shall be curved blade supply grilles of aluminum Paint Specification
construction with an extruded border and curved Process shall be anodic electro-deposition using an
deflection blades. Units with rear deflector blades shall anodic acrylic paint. Units shall undergo pre-treatment
be models LV/SH/LTV/STH. including a pressurized spray stage using an alkaline
Units shall be available in 1-, 2-, 3- or 4-way directional
air patterns. Blades shall be adjustable from full
horizontal to vertical. The units shall be the size and
quantity as outlined in the plans and specifications. The
border shall be 1 1/4" wide with aerodynamically shaped
deflector blades on .9" center. Deflector blades shall be
individually adjustable. The blade shall pivot in friction
blade position throughout the specified operating range
L
of the device. Metal friction wires are not acceptable. The

units shall be designed for surface mounting with screw
holes in the face and for lay-in applications.
Optional multi-shutter damper shall be provided for
models LM/SM/LTM/STM/LTCM.
REGISTERS
GRILLES &
L MODEL NUMBER SPECIFICATION
ALUMINUM CEILING CURVED BLADE SUPPLY GRILLE SURFACE MOUNT
Model Neck
L-1 One-Way Long Blades 6 8 10 12 14 16 18 20 22 24 26
S-1 One-Way Short Blades 4 X X X X X X X X X X X
LT-1 Two-Way Long Blades 5 X X X X X X X X X X X
ST-1 Two-Way Short Blades 6 X X X X X X X X X X X
10 X X X X X X X X X
12 X X X X X X X X
14 X X X X X X X
16 X X X X X X
18 X X X X X
20 X X X X
22 X X X
24 X X
26 X
L
Model Neck
LT-1 Two-Way Long Blades 5 X X X X X X X X X X X
ST-1 Two-Way Short Blades 6 X X X X X X X X X X X

24 Mill TR Square to Round Transition
TR Deep
Available Options
NSH No Screw Holes

REGISTERS
GRILLES &

Model Neck

LT-1 Two-Way Long Blades 30 X X X X X X X X X X
ST-1 Two-Way Short Blades 32 X X X X X X X X X
34 X X X X X X X X
36 X X X X X X X
38 X X X X X X
40 X X X X X
42 X X X X
44 X X X
46 X X
48 X

L

TR Deep
Available Options
NSH No Screw Holes
REGISTERS
GRILLES &
Model Neck
LTC-1 Two-Way Corner Blow Pattern 6 8 10 12 14 16 18 20 22 24 26
LTC-3-1 Three-Way Corner Blow Pattern 4 X X X X X X X X X X
LS3-1 Three-Way Blow Pattern 5 X X X X X X X X X X
LS4-1 Four-Way Blow Pattern 6 X X X X X X X X X X X
LV-1 One-Way Long Blades with Rear Vertical Blades 8 X X X X X X X X X X
SH-1 One-Way Short Blades with Rear Horizontal Blades 10 X X X X X X X X X
LTV-1 Two-Way Long Blades with Rear Vertical Blades 12 X X X X X X X X
STH-1 Two-Way Short Blades with Rear Horizontal Blades 14 X X X X X X X
16 X X X X X X
18 X X X X X
20 X X X X
22 X X X
24 X X
26 X
L
Model Neck
LTC-3-1 Three-Way Corner Blow Pattern 6 X X X X X X X X X X X
LS3-1 Three-Way Blow Pattern 8 X X X X X X X X X X X
LS4-1 Four-Way Blow Pattern 10 X X X X X X X X X X X
LV-1 One-Way Long Blades with Rear Vertical Blades 12 X X X X X X X X X X X
SH-1 One-Way Short Blades with Rear Horizontal Blades 14 X X X X X X X X X X X
LTV-1 Two-Way Long Blades with Rear Vertical Blades 16 X X X X X X X X X X X
STH-1 Two-Way Short Blades with Rear Horizontal Blades 18 X X X X X X X X X X X

24 Mill IS Insect Screen
Available Options
NSH No Screw Holes

REGISTERS
GRILLES &

Model Neck
LTC-3-1 Three-Way Corner Blow Pattern 28 X X X X X X X X X X X

LS4-1 Four-Way Blow Pattern 32 X X X X X X X X X
LV-1 One-Way Long Blades with Rear Vertical Blades 34 X X X X X X X X
SH-1 One-Way Short Blades with Rear Horizontal Blades 36 X X X X X X X
LTV-1 Two-Way Long Blades with Rear Vertical Blades 38 X X X X X X
STH-1 Two-Way Short Blades with Rear Horizontal Blades 40 X X X X X
42 X X X X
44 X X X
46 X X
48 X

L

24 Mill IS Insect Screen
Available Options
NSH No Screw Holes
REGISTERS
GRILLES &
ALUMINUM CEILING CURVED BLADE SUPPLY GRILLE LAY-IN
Model Neck
L-6 One-Way Long Blades 6 8 10 12 14 16 18 20 22 24 Module
S-6 One-Way Short Blades 4 X X
LT-6 Two-Way Long Blades 6 X X
12 x 12
ST-6 Two-Way Short Blades 8 X X
10 X
4 X X X X X X X X
6 X X X X X X X X
24 x 12
8 X X X X X X X X
10 X
4 X X X X X X X X
6 X X X X X X X X
8 X X X X X X X X
10 X X X X X X X X
12 X X X X X X X X
L
24 x 24
14 X X X X X X X X
16 X X X X X X X X
18 X X X X X X X X
20 X X X X X X X X
22 X
12 X X X X X X X X X X 48 x 24


REGISTERS
GRILLES &

Model Neck
L-6 One-Way Long Blades 6 8 10 12 14 16 18 20 22 24 Module
S-6 One-Way Short Blades 4 X X X X X X X X X X

ST-6 Two-Way Short Blades 8 X X X X X X X X X X
24 X X X X X X X X X X 48 x 48
L

TR Deep
REGISTERS
GRILLES &
Model Neck
L-6 One-Way Long Blades 26 28 30 32 34 36 38 40 42 44 46 Module
S-6 One-Way Short Blades
ST-6 Two-Way Short Blades 8 X X X X X X X X X X
48 x 24
22 X
L
48 x 48
46 X


REGISTERS
GRILLES &

Model
LTC-6 Two-Way Corner Blow Pattern 6 8 10 12 14 16 18 20 22 24 Module
LTC3-6 Three-Way Corner Blow Pattern 4 X

LS3-6 Three-Way Blow Pattern 6 X X
12 x 12
LS4-6 Four-Way Blow Pattern 8 X X
LV-6 One-Way Long Blades with Rear Vertical Blades 10 X
SH-6 One-Way Short Blades with Rear Horizontal Blades 4 X X X X X X X
LTV-6 Two-Way Long Blades with Rear Vertical Blades 6 X X X X X X X X
24 x 12
STH-6 Two-Way Short Blades with Rear Horizontal Blades 8 X X X X X X X X
10 X
4 X X X X X X X
6 X X X X X X X X
8 X X X X X X X X
10 X X X X X X X X
12 X X X X X X X X
L
24 x 24
14 X X X X X X X X
16 X X X X X X X X
18 X X X X X X X X
20 X X X X X X X X
22 X
4 X X X X X X X X X
12 X X X X X X X X X X 48 x 24

TR Deep
REGISTERS
GRILLES &
Model Neck
LTC-6 Two-Way Corner Blow Pattern 6 8 10 12 14 16 18 20 22 24 Module
LTC3-6 Three-Way Corner Blow Pattern 4 X X X X X X X X X
LS4-6 Four-Way Blow Pattern 8 X X X X X X X X X X
SH-6 One-Way Short Blades with Rear Horizontal Blades 12 X X X X X X X X X X
LTV-6 Two-Way Long Blades with Rear Vertical Blades 14 X X X X X X X X X X
STH-6 Two-Way Short Blades with Rear Horizontal Blades 16 X X X X X X X X X X
24 X X X X X X X X X X 48 x 48
L


REGISTERS
GRILLES &

Model Neck
LTC-6 Two-Way Corner Blow Pattern 26 28 30 32 34 36 38 40 42 44 46 Module
LTC3-6 Three-Way Corner Blow Pattern 4 X X X X X X X X X X

LS4-6 Four-Way Blow Pattern 8 X X X X X X X X X X
SH-6 One-Way Short Blades with Rear Horizontal Blades 12 X X X X X X X X X X
48 x 24
LTV-6 Two-Way Long Blades with Rear Vertical Blades 14 X X X X X X X X X X
STH-6 Two-Way Short Blades with Rear Horizontal Blades 16 X X X X X X X X X X
22 X
L
48 x 48
46 X

REGISTERS
GRILLES &
ALUMINUM CEILING CURVED BLADE SUPPLY WITH MULTI-SHUTTER DAMPER
LM-1 One-Way Long Blades 6 8 10 12 14 16 18 20 22 24 Standard
SM-1 One-Way Short Blades X X X X X X X X X X 01 White
4
LTM-1 Two-Way Long Blades 5 X X X X X X X X X X Optional
STM-1 Two-Way Short Blades 6 X X X X X X X X X X 02 Satin Silver
8 X X X X X X X X X 03 Black
10 X X X X X X X X 24 Mill
12 X X X X X X X 28 Custom Color
14 X X X X X X
16 X X X X X
18 X X X X
20 X X X
22 X X
24 X
L
ALUMINUM CEILING CURVED BLADE SUPPLY
WITH HORIZONTAL MULTI-SHUTTER DAMPER
LMH-1 One-Way Long Blades 6 8 10 12 14 Standard
LTMH-1 Two-Way Long Blades 4 X X X X X 01 White
6 X X X X X Optional
10 X 03 Black
12 X 24 Mill
28 Custom Color

ALUMINUM CEILING CURVED BLADE SUPPLY
WITH HORIZONTAL MULTI-SHUTTER DAMPER
LTCM-1 One-Way Corner Blow 6 8 10 12 14 Standard
LTC3M-1 Three-Way Corner Blow 6 X 01 White
LS3M-1 Three-Way Blow 8 X Optional
LS4M-1 Four-Way Blow 10 X 02 Satin Silver
12 X 03 Black
14 X 24 Mill
28 Custom Color

REGISTERS
GRILLES &
SERIES L PERFORMANCE DATA

MODELS L, S, LT, ST, LTC, LTC3, LS4, LV, SH, LTV, STH
LM, SM, LTM, STM, LTCM, LTC3M, LMH, LTMH, LS3M, LS4M
Size
CFM 6x6 8x6 8x8 12 x 6 10 x 8 10 x 10 12 x 10 12 x 12 14 x 12 14 x 14 18 x 12 16 x 16 NC

Velocity 645 484 363 323 290 232
Ps .055 .012 .007 .005 .004 .003
50
Throw 12-8-7 11-7-6 10-7-6 9-6-5 9-6-5 8-6-5

Velocity 968 726 645 581 465 387 323 276 237 215
100
Ps .049 .028 .022 .018 .011 .008 .005 .004 .003 .002
Throw 17-12-10 15-11-9 15-10-9 14-10-8 13-9-8 13-9-7 12-8-7 11-8-6 11-7-6 10-7-6
20
Velocity 1089 968 871 697 581 484 415 355 323 272
150
Ps .063 .049 .040 .026 .018 .012 .009 .007 .005 .004
Throw 20-14-12 20-14-11 19-13-11 17-12-10 16-12-10 15-11-9 15-10-9 14-10-8 13-9-8 13-9-7
Velocity 1161 929 774 645 553 474 430 363
200
Ps .071 .046 .032 .022 .016 .012 .010 .007

Throw 23-16-13 21-15-12 20-14-12 19-13-11 18-13-10 17-12-10 16-11-10 15-11-9
L
Velocity 968 806 691 592 538 454

250
Ps .049 .034 .025 .019 .015 .011

Throw 23-16-14 22-15-13 21-15-12 20-14-11 19-13-11 18-13-10
Velocity 1161 968 829 711 645 544
300
Ps .071 .049 .036 .027 .022 .016

Throw 26-19-15 25-17-14 23-16-14 22-16-13 22-15-13 20-14-12
20 - 25
Velocity 968 829 753 635
350
Ps .049 .036 .030 .021

Throw 26-18-15 25-17-14 24-17-14 23-16-13
Velocity 1106 948 860 726
400
Ps .065 .047 .039 .028

Throw 29-20-17 27-19-16 26-18-15 25-17-14
Velocity 1066 968 817
450
Ps .060 .049 .035

Throw 29-21-17 28-20-17 27-19-16
Velocity 1185 1075 907
500
Ps .074 .061 .043

Throw 32-22-18 31-22-18 29-20-17
Velocity 1183 998
30 - 35
550
Ps .074 .053
Throw 33-23-19 31-22-18
Velocity 1089
600
Ps .063
Throw 33-23-19
Velocity 1179
650
Ps .073
Throw 35-24-20
REGISTERS
GRILLES &
Size
CFM 24 x 14 18 x 18 20 x 20 22 x 22 24 x 24 36 x 24 30 x 30 32 x 32 44 x 24 48 x 24 44 x 28 46 x 30
Velocity 207 215
150
Ps .002 .002
Throw 12-8-7 12-8-7
200
Ps .004 .004 .003

Throw 14-10-8 14-10-8 13-9-8
Velocity 346 356 290 240
250
Ps .006 .007 .004 .003

Throw 16-12-10 17-12-10 15-11-9 14-10-8
Velocity 415 430 348 288 242
300
Ps .009 .010 .006 .004 .003

Throw 19-13-11 19-13-11 17-12-10 16-12-10 15-11-9
L
Velocity 484 502 406 336 282
350
Ps .012 .013 .009 .006 .004

Throw 21-15-12 21-15-12 19-14-11 18-13-11 17-12-10
Velocity 553 573 465 384 323 215 206
400
Ps .016 .017 .011 .008 .005 .002 .003

Throw 23-16-13 23-16-13 21-15-12 20-14-12 19-13-11 16-11-10 16-11-9
Velocity 691 717 581 480 403 269 258 227 220 202
500
Ps .025 .027 .018 .012 .009 .004 .004 .003 .003 .002
Throw 26-18-15 27-19-15 25-17-14 23-16-13 22-15-13 19-13-11 19-13-11 18-13-10 18-12-10 17-12-10
Velocity 829 860 697 576 484 323 264 272 264 242 226 202
600
Ps .036 .039 .026 .017 .012 .005 .004 .004 .004 .003 .003 .002
Throw 30-21-17 30-21-18 28-20-16 26-18-15 25-17-14 22-15-13 20-14-12 20-14-12 20-14-12 20-14-11 19-13-11 18-13-11
Velocity 968 1004 813 672 565 376 308 318 308 282 264 236
700
Ps .049 .053 .035 .024 .017 .007 .005 .005 .005 .004 .004 .003
Throw 33-23-19 34-24-20 31-22-18 29-21-17 28-19-16 24-17-14 22-16-13 23-16-13 22-16-13 22-15-13 21-15-12 20-14-12
Velocity 1106 1147 929 768 645 430 413 363 352 323 302 269
800
Ps .065 .069 .046 .031 .022 .010 .009 .007 .007 .005 .005 .004
Throw 36-26-21 37-26-21 34-24-20 32-23-19 30-21-18 26-18-15 26-18-15 25-17-14 24-17-14 24-17-14 23-16-13 22-16-13
Velocity 1045 864 726 484 396 408 396 363 339 303
900
Ps .058 .039 .028 .012 .008 .009 .008 .007 .006 .005
Throw 37-26-22 35-24-20 33-23-19 28-20-17 28-20-16 27-19-16 27-19-15 26-18-15 25-18-15 24-17-14
NC 35 30 20-25 <20

REGISTERS
GRILLES &

Size
CFM 46 x 30 46 x 32 46 x 34 46 x 36 46 x 38 46 x 40 46 x 42 46 x 44 46 x 46 48 x 44 48 x 46 48 x 48 NC
700
Ps .003 .003 .002
Throw 20-14-12 20-14-12 20-14-11
Velocity 269 252 238 224 213 202

800
Ps .004 .003 .003 .003 .002 .002
Throw 22-16-13 22-15-13 21-15-12 21-15-12 21-14-12 20-14-12
Velocity 337 316 297 281 266 252 240 230 220 220 210 202
1000
Ps .006 .005 .005 .004 .004 .003 .003 .003 .003 .003 .002 .002
20
Throw 26-18-15 25-18-15 25-18-15 24-17-14 24-17-14 24-17-14 23-16-13 23-16-13 22-16-13 23-16-13 22-16-13 22-15-13
Velocity 404 379 356 337 319 303 289 275 263 264 252 242
1200
Ps .009 .008 .007 .006 .005 .005 .004 .004 .004 .004 .003 .003
Throw 29-21-17 29-20-17 28-20-16 28-20-16 27-19-16 27-19-16 26-18-15 26-18-15 26-18-15 26-18-15 25-18-15 25-17-14
L
Velocity 471 442 416 393 372 353 337 321 307 308 295 282
1400
Ps .012 .010 .009 .008 .007 .007 .006 .005 .005 .005 .005 .004
Throw 33-23-19 32-23-19 32-22-18 31-22-18 30-21-18 30-21-17 29-21-17 29-20-17 28-20-16 28-20-16 28-20-16 28-19-16
Velocity 539 505 475 449 425 404 385 367 351 352 337 323
1600
Ps .015 .013 .012 .011 .010 .009 .008 .007 .007 .007 .006 .005
Throw 36-25-21 35-25-21 35-24-20 34-24-20 33-23-19 33-23-19 32-23-19 32-22-18 31-22-18 31-22-18 31-22-18 30-21-18
Velocity 606 568 535 505 478 454 433 413 395 396 379 363
1800
Ps .019 .017 .015 .013 .012 .011 .010 .009 .008 .008 .008 .007
Throw 39-28-23 38-27-22 37-26-22 37-26-21 36-25-21 35-25-21 35-24-20 34-24-20 34-24-20 34-24-20 33-23-19 33-23-19
Velocity 673 631 594 561 531 505 481 459 439 440 421 403
20 - 25
2000
Ps .024 .021 .019 .017 .015 .013 .012 .011 .010 .010 .009 .009
Throw 42-30-24 41-29-24 40-28-23 40-28-23 39-27-23 38-27-22 37-26-22 37-26-21 36-26-21 36-26-21 36-25-21 35-25-20
Velocity 808 757 713 673 638 606 577 551 527 528 505 484
2400
Ps .340 .030 .027 .024 .021 .019 .018 .016 .015 .015 .013 .012
Throw 48-33-28 47-33-27 46-32-27 45-31-26 44-31-26 43-30-25 42-30-25 42-29-24 41-29-24 41-29-24 41-29-24 40-28-23
Velocity 942 884 832 785 744 707 673 643 615 616 589 565
2800
Ps .047 .041 .036 .033 .029 .026 .024 .022 .020 .020 .018 .017
Throw 53-37-31 52-36-30 51-36-29 50-35-29 49-34-28 48-34-28 47-33-27 46-33-27 46-32-27 46-32-27 45-32-26 44-31-26
Velocity 1010 947 891 842 797 757 721 689 659 660 631 605
3000
Ps .054 .047 .042 .037 .034 .030 .027 .025 .023 .023 .021 .019
Throw 55-39-32 54-38-31 53-37-31 52-37-30 51-36-30 50-35-29 49-35-29 49-34-28 48-34-28 48-34-28 47-33-27 47-33-27
NC 35-40 30 - 35
REGISTERS
GRILLES &
Size
CFM 46 x 30 46 x 32 46 x 34 46 x 36 46 x 38 46 x 40 46 x 42 46 x 44 46 x 46 48 x 44 48 x 46 48 x 48 NC
Velocity 673 631 594 561 531 505 481 459 439 440 421 403
2000
Ps .024 .021 .019 .017 .015 .013 .012 .011 .010 .010 .009 .009
Throw 42-30-24 41-29-24 40-28-23 40-28-23 39-27-23 38-27-22 37-26-22 37-26-21 36-26-21 36-26-21 36-25-21 35-25-20
Velocity 741 694 653 617 585 555 529 505 483 484 463 444
2200
Ps .029 .025 .023 .020 .018 .016 .015 .013 .012 .012 .011 .010
Throw 45-32-26 44-31-26 43-30-25 42-30-25 41-29-24 41-29-24 40-28-23 39-28-23 39-27-23 39-27-23 38-27-22 38-28-22
Velocity 808 757 713 673 638 606 577 551 527 528 505 484
25 - 30
2400
Ps .034 .030 .027 .024 .021 .019 .018 .016 .015 .015 .013 .012
Throw 48-33-28 47-33-27 46-32-27 45-31-26 44-31-26 43-30-25 42-30-25 42-29-24 41-29-24 41-29-24 41-29-24 40-28-23
Velocity 875 820 772 729 691 656 625 597 571 572 547 524
2600
Ps .040 .036 .031 .028 .025 .023 .021 .019 .017 .017 .016 .014
Throw 50-35-29 49-35-29 48-34-28 47-33-27 46-33-27 46-32-26 45-32-26 44-31-26 43-31-25 44-31-25 43-30-25 42-30-25
Velocity 942 884 832 785 744 707 673 643 615 616 589 565
L
2800
Ps .047 .041 .036 .033 .029 .026 .024 .022 .020 .020 .018 .017
Throw 53-37-31 52-36-30 51-36-29 50-35-29 49-34-28 48-34-28 47-33-27 46-33-27 46-32-27 46-32-27 45-32-26 44-31-26
Velocity 1010 947 891 842 797 757 721 689 659 660 631 605
3000
Ps .054 .047 .042 .037 .034 .030 .027 .025 .023 .023 .021 .019
Throw 55-39-32 54-38-31 53-37-31 52-37-30 51-36-30 50-35-29 49-35-29 49-34-28 48-34-28 48-34-28 47-33-27 47-33-27
Velocity 1077 1010 950 898 850 808 769 734 702 704 673 645
3200
Ps .061 .054 .048 .043 .038 .034 .031 .028 .026 .026 .024 .022
Throw 58-41-34 56-40-33 55-39-32 54-38-32 53-37-31 52-37-30 52-36-30 51-36-30 50-35-29 50-35-29 44-35-29 49-34-28
Velocity 1144 1073 1010 954 904 858 827 780 746 748 715 685
3400
Ps .069 .061 .054 .048 .043 .039 .035 .032 .029 .029 .027 .025
Throw 60-42-35 59-41-34 58-40-33 57-40-33 56-39-32 55-38-32 54-38-31 53-37-31 52-37-30 52-37-30 51-36-30 51-36-29
Velocity 1136 1069 1010 957 909 866 826 790 792 757 726
3600
Ps .068 .060 .054 .048 .044 .040 .036 .033 .033 .030 .028
30 - 35
Throw 61-43-35 60-42-35 5-41-34 58-41-34 57-40-33 56-39-32 55-39-32 54-38-31 54-38-31 53-38-31 53-37-31
Velocity 1199 1129 1066 1010 959 834 872 834 836 799 766
3800
Ps .076 .067 .060 .054 .049 .037 .040 .037 .037 .034 .031
Throw 63-44-37 62-44-36 61-43-35 60-42-35 59-41-34 56-39-33 57-40-33 56-39-33 56-39-33 55-39-32 55-38-32
Velocity 1188 1122 1063 1010 962 918 878 880 842 806
4000
Ps .074 .066 .060 .054 .049 .044 .041 .041 .037 .034
Throw 64-45-37 63-44-37 62-43-36 61-43-35 60-42-35 59-41-34 58-41-34 58-41-34 57-40-33 56-40-33
Velocity 1178 1116 1060 922 964 922 924 884 847
4200
Ps .073 .066 .059 .045 .049 .045 .045 .041 .038

Throw 65-46-38 64-45-37 63-44-36 60-42-35 61-43-35 60-42-35 60-42-35 59-42-34 58-41-34
Velocity 1169 1111 1058 1010 966 968 926 887
4400
Ps .072 .065 .059 .054 .049 .049 .045 .042

Throw 66-46-38 65-45-38 64-45-37 63-44-36 62-43-36 62-43-36 61-43-35 60-42-35
Velocity 1161 1010 1056 1010 1012 968 927
35 - 40
4600
Ps .071 .054 .059 .054 .054 .049 .045

Throw 67-47-39 65-46-38 65-45-37 64-45-37 64-45-37 63-44-36 62-43-36

REGISTERS
GRILLES &
PERFORMANCE NOTES FOR SERIES L

DEFINITION OF UNITS

Throw Non-isothermal horizontal throw (supply air temperature 15F colder than average room temperature);
L
REGISTERS
GRILLES &
MODEL RHP
The RHP series grille is an economical one-piece stamped frame
return. It combines the advantages of corrosive resistant aluminum
construction and durability with an attractive design and solid
performance.
Economical pricing combined with solid performance
Fixed horizontal blades at 40 deflection
Optional opposed blade damper
RHP
Available Sizes
8x4 12 x 8
8x6 14 x 4
10 x 4 14 x 6
10 x 6 14 x 8
10 x 8 16 x 6
12 x 4 16 x 8
12 x 6

REGISTERS
GRILLES &
SERIES RHP SPECIFICATIONS

RETURN FIXED HORIZONTAL BLADE Performance Specification
ALUMINUM MODEL RHP The manufacturer shall provide published performance
Air inlets shall be model RHP manufactured by data. Data shall be tested in accordance to ANSI/
METALAIRE. Units shall be return or exhaust grilles of ASHRAE Standard 70-2006.
aluminum construction with a one-piece stamped frame

and a single set of fixed deflection blades. The units Paint Specification
shall be the size and quantity as outlined in the plans Process shall be anodic electro-deposition using an
and specifications. The border shall be 1 1/4" wide with anodic acrylic paint. Units shall undergo pre-treatment
aerodynamically shaped deflector blades on 2/3" center including a pressurized spray stage using an alkaline
set at 40. The units are designed for surface mounting cleaner and a de-ionized water rinse.
applications and be provided with screw holes in the face
of the device.
steel (Model OBD) or aluminum (Model OBDA). Damper
must be operable from the face of the register.
RHP
RHP MODEL NUMBER SPECIFICATION

ALUMINUM STAMPED BORDER
RHP-1 Surface Mount 6 8 10 12 14 Standard
4 X X X X 01 White
6 X X X X X Optional
10 X 03 Black
12 X 24 Mill
28 Custom Color
OBD Steel Opposed Blade Damper
OBDA Aluminum Opposed Blade Damper
PF Plaster Frame
NSH No Screw Holes
REGISTERS
GRILLES &
MODEL RH
The RH series of return and exhaust grilles is available in
a selection of styles and features designed to meet todays
performance standards. The RH series is available in aluminum (RH),
extruded aluminum (RHE) and steel (SRH) construction.
Horizontal blades fixed at 40 deflection
Available in multiple frame styles
1 Surface Mount
6 T-bar Lay-in
7 Concealed Spline
8 Tegular Lay-in
9 Donn Fineline/Bolt Slot
Optional hinged face
Module Size Neck Size Module Size Neck Size Module Size Neck Size RH
12 x 12 10 x 10 24 x 24 22 x 22 36 x 36 34 x 34
12 x 24 10 x 22 24 x 48 22 x 46 48 x 48 46 x 46
Standard -6 Sizes

REGISTERS
GRILLES &
RH
REGISTERS
GRILLES &
Model: RHE-1 ( Return Grille - Surface Mount ) Face View ( Model RHE-1 )
Countersunk
Specified Duct Size= Mounting Holes
Listed Size Deflection Vanes
1 1 (Horizontal)
14 Listed Size - 4
5
32
14 .666
Listed Size + 2
5
8
Model: RHE-H-1 ( Return Grille - Surface Mount - Hinged Core /

Removable Core ) Face View ( Hinged )
Listed Size + 2
Rotating Fastener Rotating Fastener
Specified Duct Size =
Listed Size
5 5
1 7 1
Listed Size - 4 8
16 8
5
32
1
14
Deflection Vanes
.666 (Horizontal) Mounting Holes
Mounting Holes
Model: RHE-1 OBD ( Return Register - Surface Mount ) Model: RHE-1 OBD ( Return Register - Hinged Core )
with Opposed Blade Damper with Opposed Blade Damper
RH
Listed Size + 2
Specified Duct Size= Specified Duct Size=

Listed Size Options: Listed Size
Options:
1 OBD or OBDA 1
Listed Size - 8 OBD or OBDA
Listed Size - 8
Opposed Blade Damper Opposed Blade Damper
2 15 Damper Operator
23 Damper Operator 16
(Screwdriver Slot)
1
14
Horizontal Horizontal
Listed Size + 2 .666
Deflection Vanes Deflection Vanes
Model: RHE-6 ( Return Grille - Lay In T-Bar ) Face View

F
Model: RHE-6 ( Return Grille - Lay In T-Bar ) Face
F ViewSize =
Overall
Overall Size =
T-Bar Module
T-Bar Module T-Bar
T-Bar Module
Module - 41 - 41

1
Horizontal
Horizontal
Deflection Vanes
Deflection Vanes Overall Size =
13
13
8 Overall Size =1
8 T-Bar Module - 4
1
1
14 .666 T-Bar Module - 4
1
14 .666 1
Overall Grille=T-Bar Module - 4
1
Modules 12 x 12 through 48 x 48
Neck Size Tile Size Neck Size Tile Size Neck Size
Tile Size 12 x 12 12 x 24 24 x 24 36 x 36 48 x 48
Neck Size Tile Size
Neck Size 10 x 10
Neck Size
10 x 22
Tile Size 34 Neck
22 x 22 x 34
Size
46 x 46
Tile Size 12 x 12 Modules
12 x 24 24 12 x 12 through
x 24 36 x 3648 x 48
48 x 48
Model: RHE-6 OBD ( Return Register - Hinge Core
Neck Size Neck
10 xwith Size
10 Opposed TileDamper
Blade
10 x 22 22Size Neck
x 22 - Lay34
In 34Size
xT-Bar ) 46 x 46Tile Size Neck Size 5
Mounting Holes 8
Tile Size RHE-6 OBD

Model: 12(xReturn
12 Specified
12 Duct
x 24-Size = Listed
Register 24 xSize
24 36 x 36 48 x 48 Hinge Core
Listed Size - 1 Opposed Blade Damper
with Opposed Blade Damper - Lay In 1T-Bar )8
Neck Size 101x 110 10 x 22
1 22 x 22 34 x 34 46 x 46
Mounting Holes
5
2 2 Damper Operator
8
Specified Duct Size = Listed Size (Screwdriver Slot)

1
Listed Size - 8 Horizontal Deflection Vanes
1
14
1 121
12
Damper Operator Rotating Fastener
(Screwdriver Slot)
Removable Core
Horizontal Deflection Vanes
1
14 Mounting Holes
5
8
21
TR Transition Square / 8 Rotating Fastener
Rectangular To Round Height
Removable Core
Rotating
Fastener 5
Mounting Holes 8
21
TR Transition Square / 8
T-Bar Module - 4
1
14 .666
1
REGISTERS
GRILLES &
Neck Size Tile Size Neck Size Tile Size Neck Size
Tile Size 12 x 12 12 x 24 24 x 24 36 x 36 48 x 48
Neck Size 10 x 10 10 x 22 22 x 22 34 x 34 46 x 46
Model: RHE-6 OBD ( Return Register - Hinge Core

with Opposed Blade Damper - Lay In T-Bar ) 5
Mounting Holes 8

8
1 121
12
Damper Operator
(Screwdriver Slot)
Horizontal Deflection Vanes
1
14
Rotating Fastener
Removable Core
5
Mounting Holes 8
21
TR Transition Square / 8
Rectangular To Round Height
Rotating
Fastener
RH
Model: SRH-1 ( Steel Return Grille - Surface Mount)

Face View (SRH-1 Model)

3 Mounting Holes
1 Listed Size* - 38 Deflection Vanes 16
12 ( Countersunk )
5
8
1
14 .666 5
32
Listed Size* + 2
* See Catalog For Standard Listed Size.
Model: SRH-6 ( Steel Return Grille And Panel - Lay In T-Bar )

Face View (SRH-6 Model)
1
14 Duct Size =Listed Size
5
8
.666
Overall Panel Size = 23 34 x 23 34
T-Bar Module = 24 x 24
Face View (SRH-H-1 Model)

Model: SRH-H-1 ( Steel Return Grille - Surface Mount - Hinged Core /
Removable Core) Rotating Fastener
1
Listed Size* - 8
1
12 Deflection Vanes
5 3 Mounting Holes
32 16
( Countersunk )
1
14 3
.666 8
* See Catalog For Standard Listed Size.

1
Listed Size + 28
REGISTERS
GRILLES &
SERIES RH SPECIFICATIONS
RETURN FIXED HORIZONTAL BLADE Performance Specification
ALUMINUM/EXTRUDED ALUMINUM/ The manufacturer shall provide published performance
STEEL MODELS RH/RHE/SRH data. Data shall be tested in accordance to ANSI/
Air inlets shall be model RH/RHE/SRH manufactured by ASHRAE Standard 70-2006.
METALAIRE. Units shall be return or exhaust grilles of

aluminum (RH), extruded aluminum (RHE) or steel (SRH) Paint Specification
construction and a single set of fixed deflection blades. Process shall be anodic electro-deposition using an
The units shall be the size and quantity as outlined in the anodic acrylic paint. Units shall undergo pre-treatment
plans and specifications. The border shall be 1 1/4" wide including a pressurized spray stage using an alkaline
with aerodynamically shaped deflector blades on 2/3" cleaner and a de-ionized water rinse.
center set at 40. The units shall be designed to integrate
into the specified ceiling system.
Optional Hinged face and Removable face will allow
access to concealed equipment.
steel (Model OBD) or aluminum (Model OBDA). Damper
must be operable from the face of the register.
RH

REGISTERS
GRILLES &
RH MODEL NUMBER SPECIFICATION

SIDEWALL RETURN GRILLE FIXED HORIZONTAL BLADES SURFACE MOUNT
Model Neck
RH-1 Rolled Form Aluminum Sidewall Return Grille 6 8 10 12 14 16 18 20 22 24 26
RHE-1 Extruded Aluminum Sidewall Return Grille 4 X X X X X X X X X X X

SRH-1 Steel Sidewall Return Grille 5 X X X X X X X X X X X
RH-H-1 Rolled Form Aluminum Hinged Sidewall Return Grille 6 X X X X X X X X X X X
RHE-H-1 Extruded Aluminum Hinged Sidewall Return Grille 8 X X X X X X X X X X X
SRH-H-1 Steel Hinged Sidewall Return Grille 10 X X X X X X X X X X X
RH

24 Mill (Aluminum Construction Only) IS Insect Screen
Available Options
NSH No Screw Holes
REGISTERS
GRILLES &
SIDEWALL RETURN GRILLE FIXED HORIZONTAL BLADES SURFACE MOUNT
Model Neck
RH-1 Rolled Form Aluminum Sidewall Return Grille 28 30 32 34 36 38 40 42 44 46 48
RHE-1 Extruded Aluminum Sidewall Return Grille 4 X X X X X X X X X X X
SRH-1 Steel Sidewall Return Grille 5 X X X X X X X X X X X
RH-H-1 Rolled Form Aluminum Hinged Sidewall Return Grille 6 X X X X X X X X X X X
RHE-H-1 Extruded Aluminum Hinged Sidewall Return Grille 8 X X X X X X X X X X X
SRH-H-1 Steel Hinged Sidewall Return Grille 10 X X X X X X X X X X X
RH

Available Options
NSH No Screw Holes

REGISTERS
GRILLES &

SIDEWALL RETURN GRILLE FIXED HORIZONTAL BLADES LAY-IN
Model Neck
RH-6 Rolled Form Aluminum Sidewall Return Grille 6 8 10 12 14 16 18 20 22 24 Module
RHE-6 Extruded Aluminum Sidewall Return Grille 4 X X

RH-H-6 Rolled Form Aluminum - Hinged Face 6 X X
12 x 12
RHE-H-6 Extruded Aluminum - Hinged Face 8 X X
10 X
4 X X X X X X X X
6 X X X X X X X X
24 x 12
8 X X X X X X X X
10 X
4 X X X X X X X X
6 X X X X X X X X
8 X X X X X X X X
10 X X X X X X X X
12 X X X X X X X X
RH
24 x 24
14 X X X X X X X X
16 X X X X X X X X
18 X X X X X X X X
20 X X X X X X X X
22 X
12 X X X X X X X X X X 36 x 24

REGISTERS
GRILLES &
Model Neck
RH-6 Rolled Form Aluminum Sidewall Return Grille 26 28 30 32 34 36 38 40 42 44 46 Module
RHE-6 Extruded Aluminum Sidewall Return Grille 4 X X X X
RH-H-6 Rolled Form Aluminum - Hinged Face 6 X X X X
RHE-H-6 Extruded Aluminum - Hinged Face 8 X X X X
10 X X X X
12 X X X X
36 x 24
14 X X X X
16 X X X X
18 X X X X
20 X X X X
22 X X X X X

RH

REGISTERS
GRILLES &

Model Neck
RHE-6 Extruded Aluminum Sidewall Return Grille 4 X X X X X X X X X X

RH-H-6 Rolled Form Aluminum - Hinged Face 6 X X X X X X X X X X
RHE-H-6 Extruded Aluminum - Hinged Face 8 X X X X X X X X X X
18 X X X X X X X X X X 36 x 36
RH
12 X X X X X X X X X X 48 x 24

REGISTERS
GRILLES &
Model Neck
RHE-6 Extruded Aluminum Sidewall Return Grille 4 X X X X
RH-H-6 Rolled Form Aluminum - Hinged Face 6 X X X X
RHE-H-6 Extruded Aluminum - Hinged Face 8 X X X X
10 X X X X
12 X X X X
14 X X X X
16 X X X X
18 X X X X
36 x 36
20 X X X X
22 X X X X
24 X X X X
26 X X X X
28 X X X X
RH
30 X X X X
32 X X X X
34 X
48 x 24
22 X


REGISTERS
GRILLES &

Model Neck

RH-H-6 Rolled Form Aluminum - Hinged Face 6 X X X X X X X X X X
24 X X X X X X X X X X 48 x 48
RH

REGISTERS
GRILLES &
Model Neck
RH-H-6 Rolled Form Aluminum- Hinged Face 6 X X X X X X X X X X
48 x 48
RH
46 X


REGISTERS
GRILLES &

Model Neck
RH-7 Aluminum Concealed Spline Ceiling 6 8 10 12 14 16 18 20 Module
RH-8 Aluminum Tegular Ceiling 4 X X X X X X X X

RH-9 Aluminum Donn Fineline/Bolt Slot Ceiling 6 X X X X X X X X
8 X X X X X X X X
10 X X X X X X X X
12 X X X X X X X X 24 x 24
14 X X X X X X X X
16 X X X X X X X X
18 X X X X X X X X
20 X X X X X X X X

RH

02 Satin Silver
03 Black
24 Mill
28 Custom Color
REGISTERS
GRILLES &
Model Neck
SRH-6 Steel Sidewall Return Grille 6 8 10 12 14 16 18 20 22 24 Module
SRH-H-6 Steel - Hinged Face 4 X X
6 X X
12 x 12
8 X X
10 X
4 X X X X X X X X
6 X X X X X X X X
24 x 12
8 X X X X X X X X
10 X
4 X X X X X X X X
6 X X X X X X X X
8 X X X X X X X X
10 X X X X X X X X
12 X X X X X X X X
RH
24 x 24
14 X X X X X X X X
16 X X X X X X X X
18 X X X X X X X X
20 X X X X X X X X
22 X
12 X X X X X X X X X X 48 x 24


REGISTERS
GRILLES &

Model Neck
SRH-6 Steel Sidewall Return Grille 26 28 30 32 34 36 38 40 42 44 46 Module
SRH-H-6 Steel - Hinged Face 4 X X X X X X X X X X

48 x 24
22 X

RH

REGISTERS
GRILLES &
SERIES RH PERFORMANCE DATA
MODELS RH, RHP, RHE, SRH, RH-H, SRH-H
Size
Velocity 240 200
100
Ps .007 .005
Velocity 360 300 270 225 200
150
Ps .016 .011 .009 .006 .005
Velocity 480 400 360 300 267 200
200
Ps .029 .020 .016 .011 .009 .005
Velocity 600 500 450 375 333 250
250
Ps .046 .032 .026 .018 .014 .008
Velocity 720 600 540 450 400 300 225 200
300
Ps .066 .046 .037 .026 .020 .011 .006 .005
Velocity 840 700 630 525 467 350 263 233 210
350
Ps .089 .062 .050 .035 .028 .016 .009 .007 .006
Velocity 800 720 600 533 400 300 267 240 200
RH
400
Ps .081 .066 .046 .036 .020 .011 .009 .007 .005
Velocity 900 810 675 600 450 338 300 270 225 200
450
Ps .103 .083 .058 .046 .026 .014 .011 .009 .006 .005
Velocity 750 667 500 375 333 300 250 222 200
500
Ps .071 .056 .032 .018 .014 .011 .008 .006 .005
Velocity 825 733 550 413 367 330 275 244 220
550
Ps .086 .068 .038 .022 .017 .014 .010 .008 .006
Velocity 900 800 600 450 400 360 300 267 240 216 200
600
Ps .103 .081 .046 .026 .020 .016 .011 .009 .007 .006 .005
Velocity 867 650 488 433 390 325 289 260 234 217
650
Ps .095 .054 .030 .024 .019 .013 .011 .009 .007 .006
Velocity 700 525 467 420 350 311 280 252 233
700
Ps .062 .035 .028 .022 .016 .012 .010 .008 .007
Velocity 750 563 500 450 375 333 300 270 250
750
Ps .071 .040 .032 .026 .018 .014 .011 .009 .008
NC 40 35 30 25

REGISTERS
GRILLES &
SERIES RH PERFORMANCE DATA

MODELS RH, RHP, RHE, SRH, RH-H, SRH-H
Size
Velocity 208
700
Ps .005
800
Ps .007 .006 .005
Velocity 298 267 250 222 200
1000
Ps .011 .009 .008 .006 .005
Velocity 357 320 300 267 240 200
1200
Ps .016 .013 .011 .009 .007 .005
Velocity 417 373 350 311 280 233 224
1400
Ps .022 .017 .015 .012 .010 .007 .006
Velocity 476 427 400 356 320 267 256 213 200
1600
Ps .028 .023 .020 .016 .013 .009 .008 .006 .005
Velocity 595 533 500 444 400 333 320 267 250 229
RH
2000
Ps .044 .036 .031 .025 .020 .014 .013 .009 .008 .007
Velocity 744 667 625 556 500 417 400 333 313 286 238 208
2500
Ps .069 .056 .049 .039 .031 .022 .020 .014 .012 .010 .007 .005
Velocity 893 800 750 667 600 500 480 400 375 343 286 250 214
3000
Ps .100 .080 .070 .056 .045 .031 .029 .020 .018 .015 .010 .008 .006
Velocity 875 778 700 583 560 467 438 400 333 292 250 219
3500
Ps .096 .076 .061 .043 .039 .027 .024 .020 .014 .011 .008 .006
Velocity 889 800 667 640 533 500 457 381 333 286 250
4000
Ps .099 .080 .056 .051 .036 .031 .026 .018 .014 .010 .008
Velocity 900 750 720 600 563 514 429 375 321 281
4500
Ps .101 .070 .065 .045 .040 .033 .023 .018 .013 .010
Velocity 833 800 667 625 571 476 417 357 313
5000
Ps .087 .080 .056 .049 .041 .028 .022 .016 .012
Velocity 800 750 686 571 500 429 375
6000
Ps .080 .070 .059 .041 .031 .023 .018
NC 40 35 30 25
PERFORMANCE NOTES FOR SERIES RH

DEFINITION OF UNITS
Velocity Velocity of air stream in Feet per Minute
REGISTERS
GRILLES &
MODEL 4002R
The 4000R series return grilles is designed to match
the 4000 series supply grilles. They are available in
aluminum (4002R) and steel (4002RS) construction.
Available in two frame styles (Surface Mount and Lay-in)
Available with horizontal (H4002R/H4002RS) or vertical (V4002R/V4002RS) blades
Standard 1 1/4" wide border with blades fixed on 2/3" centers
Fixed 0 or 40 blade deflection
Optional concealed mounting
Model: H4002R-1 ( Sidewall Return Grille - Surface Mount ) Face View ( H4002R-1 )
( Horizontal Fixed Blades )
Listed Size 3
Overall Height = 16
5 1 5/8
Neck Size = Listed Size - 3
8 32 Listed Height + 134
Countersunk
4002R
Mounting Holes
Cross Bar
13
8 Horizontal
Deflection Blade
Overall Size = Listed size + 134 1
Overall Length =
Listed Size + 134
Model: V4002R-1 ( Sidewall Return Grille - Surface Mount )
( Vertical Fixed Blades ) Face View ( V4002R-1 )
Listed Size
3
Neck Size = 16
Overall Height = Countersunk
5
Listed Size - 3
8 32
1 5/8 Mounting Holes
Listed Height + 134
1
2
Cross Bar
13
8 Horizontal 1
Overall Length =
Overall Size = Listed size + 134 Deflection Blade
Listed Size + 134
Model: 4002R-6 ( Ceiling Return Grille - Lay In T-Bar ) Face View ( V4002R-6 ) Face View ( H4002R-6 )
( V-Vertical Or H-Horizontal Fixed Blades)
Listed Size = T-Bar Module
Overall Panel Size = Listed Size -41 Listed Listed

Height Height
Listed Neck Size - 3
8 - 41 - 41
Panel
Listed Length - 41 Listed Length - 41
Model: V4002R-1 Or H4002R-1 (Sidewall Return Register) Model: V4002R-6 Or H4002R-6 (Ceiling Return Register - Lay In T-Bar)
(V-Vertical Or H-Horizontal Fixed Blades) (V-Vertical Or H-Horizontal Fixed Blades)
( With Opposed Blade Damper ) (With Opposed Blade Damper )
Listed Size Options: Listed Size = T-Bar Module

OBD or OBDA Options:
Damper Size = Neck Size =
Opposed Blade Damper OBD or OBDA
5
Listed Size - 16 Listed Neck Size - 41 Opposed Blade Dam
Damper Operator
Damper Operator
27 (Screwdriver Slot) 27
8 8 (Screwdriver Slot)

REGISTERS
GRILLES &
Model: H4002RS-1 ( Sidewall Return Grille - Fixed Vertical Blades )

Listed Size Face View (Horizontal Blades)
1
Listed Size - 2
13
4
3
16 Mounting Holes
Countersunk
5 1 Horizontal
32 14
Deflection Blade
9
16
Model: V4002RS-1 ( Sidewall Return Grille - Fixed Horizontal Blades )

Listed Size Face View (Vertical Blades)
Listed Size - 1
2 Vertical
Deflection Blades
3
16 Mounting Holes
Countersunk
5 1
14 .666 13
4
32 9 .666
16
Model: H4002RS-6 ( Ceiling Return Register - Lay In T-Bar)

Fixed Vertical Blades
4002R
Face View (Vertical Blades)

Listed Size = T-Bar Module Vertical
Deflection Blades
Listed Size - 215
16
1
34
13
4
5 1
32 14 .666 .666
Overall Face = Listed Size - 41"
Model: V4002RS-6 ( Ceiling Return Grille - Lay In T-Bar ) Face View (Horizontal Blades)
( Fixed Horizontal Blades )
Listed Size = T-Bar Module
Horizontal
Listed Size - 215
16 Deflection Blades
13
4
5 1
32 14 Blades View
Overall Face = Listed size - 41"
REGISTERS
GRILLES &
SERIES 4002R SPECIFICATIONS
RETURN
FIXED BLADE ALUMINUM/ Performance Specification
STEEL MODELS 4002R/4002RS The manufacturer shall provide published performance
Air inlets shall be model V4002R/V4002RS (vertical data. Data shall be tested in accordance to ANSI/
blades) or H4002R/H4002RS (horizontal blades) ASHRAE Standard 70-2006.
manufactured by METALAIRE. Units shall be return or
exhaust grilles of aluminum (4002R) or steel (4002RS) Paint Specification
construction and a single set of fixed deflection blades. Process shall be anodic electro-deposition using an
The air inlets are to be specifically designed to match the anodic acrylic paint. Units shall undergo pre-treatment
appearance of the supply units, METALAIRE 4000 series. including a pressurized spray stage using an alkaline
The units shall be the size and quantity as outlined in cleaner and a de-ionized water rinse.
the plans and specifications. The border shall be 1 1/4"
wide with aerodynamically shaped deflector blades on
2/3" center set at 0 or 40. The deflector blades shall
be fixed. Units shall be designed for surface mounting,
with countersunk screw holes on the face of the device, or
T-bar Lay-in applications.
4002R

REGISTERS
GRILLES &

SIDEWALL RETURN GRILLE SURFACE MOUNT
Model Neck
V4002R-1 Al. - Vertical Blade 6 8 10 12 14 16 18 20 22 24 26
H4002R-1 Al. - Horizonta Blade 4 X X X X X X X X X X X

V4002RS-1 Steel - Vertical Blade 5 X X X X X X X X X X X
H4002RS-1 Steel - Horizontal Blade 6 X X X X X X X X X X X
4002R

04 Clear Anodize IS Insect Screen
24 Mill (Aluminum Construction Only) TR Square to Round Transition
TR Deep
Available Options
NSH No Screw Holes
REGISTERS
GRILLES &
SIDEWALL RETURN GRILLE SURFACE MOUNT
Model Neck
V4002R-1 Al. - Vertical Blade 28 30 32 34 36 38 40 42 44 46 48
H4002R-1 Al. - Horizonta Blade 4 X X X X X X X X X X X
V4002RS-1 Steel - Vertical Blade 5 X X X X X X X X X X X
H4002RS-1 Steel - Horizontal Blade 6 X X X X X X X X X X X
4002R

04 Clear Anodize IS Insect Screen
TR Deep
Available Options
NSH No Screw Holes

REGISTERS
GRILLES &

SIDEWALL RETURN GRILLE LAY-IN
Model Neck
V4002R-6-6 Al. - Vertical Blade 6 8 10 12 14 16 18 20 22 24 Module
H4002R-6 Al. - Horizontal Blade - Single Def. 4 X X

V4002RS-6 Steel - Vertical Blade - Single Def. 6 X X
12 x 12
H4002RS-6 Steel - Horizontal Blade - Single Def. 8 X X
10 X
4 X X X X X X X X
6 X X X X X X X X
24 x 12
8 X X X X X X X X
10 X
4 X X X X X X X X
6 X X X X X X X X
8 X X X X X X X X
10 X X X X X X X X
12 X X X X X X X X
4002R
24 x 24
14 X X X X X X X X
16 X X X X X X X X
18 X X X X X X X X
20 X X X X X X X X
22 X
48 x 24

24 Mill (Alum. Construction Only) TR Square to Round Transition
REGISTERS
GRILLES &
Model Neck
V4002R-6-6 Al. - Vertical Blade 6 8 10 12 14 16 18 20 22 24 Module
H4002R-6 Al. - Horizontal Blade - Single Def. 4 X X X X X X X X X X
V4002RS-6 Steel - Vertical Blade - Single Def. 6 X X X X X X X X X X
H4002RS-6 Steel - Horizontal Blade - Single Def. 8 X X X X X X X X X X
48 x 48
4002R


REGISTERS
GRILLES &

Model Neck
V4002R-6-6 Al. - Vertical Blade 26 28 30 32 34 36 38 40 42 44 46 Module
H4002R-6 Al. - Horizontal Blade - Single Def. 4 X X X X X X X X X X
V4002RS-6 Steel - Vertical Blade - Single Def. 6 X X X X X X X X X X

H4002RS-6 Steel - Horizontal Blade - Single Def. 8 X X X X X X X X X X
48 x 24
22 X
4002R
48 x 48
46 X

REGISTERS
GRILLES &
SERIES 4002R PERFORMANCE DATA
MODELS H4002R, V4002R, H4002S,V4002RS
CFM 6x4 8x4 10 x 4 14 x 4 12 x 6 14 x 6 16 x 6 14 x 8 18 x 8 NC
Nk Vel 300 225
50
Ps 0.014 0.008
Nk Vel 600 450 360 257 200
100
Ps 0.056 0.031 0.02 0.01 0.006
20
Nk Vel 900 675 540 386 300 257 225
150
Ps 0.126 0.071 0.045 0.023 0.014 0.01 0.008
Nk Vel 900 720 514 400 343 300 257 200
200
Ps 0.126 0.081 0.041 0.025 0.018 0.014 0.01 0.006
Nk Vel 643 500 429 375 321 250
250
Ps 0.064 0.039 0.029 0.022 0.016 0.01
Nk Vel 771 600 514 450 386 300
300
Ps 0.093 0.056 0.041 0.031 0.023 0.014
Nk Vel 900 700 600 525 450 350
350 25-30
Ps 0.126 0.076 0.056 0.043 0.031 0.019
4002R
Nk Vel 800 686 600 514 400
400
Ps 0.1 0.073 0.056 0.041 0.025
Nk Vel 857 750 643 500
500
Ps 0.114 0.087 0.064 0.039
Nk Vel 900 771 600
600
Ps 0.126 0.093 0.056
30-35
Nk Vel 900 700
700
Ps 0.126 0.076
NC 30 - 35

REGISTERS
GRILLES &

CFM 20 x 8 24 x 8 26 x 8 24 x 10 30 x 10 24 x 12 28 x 12 30 x 12 30 x 14 NC
Nk Vel 225
250
Ps 0.008
Nk Vel 270 225 208
300
Ps 0.011 0.008 0.007
Nk Vel 315 263 242 210
350 20
Ps 0.015 0.011 0.009 0.007
Nk Vel 360 300 277 240 200
400
Ps 0.02 0.014 0.012 0.009 0.0069
Nk Vel 450 375 346 300 240 250 214 200
500
Ps 0.031 0.022 0.019 0.014 0.009 0.009 0.007 0.006
Nk Vel 540 450 415 360 288 300 257 240 206
600
Ps 0.045 0.031 0.027 0.02 0.013 0.013 0.01 0.009 0.007
Nk Vel 630 525 485 420 336 350 300 280 240
700
Ps 0.062 0.043 0.037 0.027 0.018 0.018 0.014 0.012 0.009
4002R
Nk Vel 384 343 320 274

800
Ps 0.023 0.018 0.016 0.012
Nk Vel 480 429 400 343
1000 25-30
Ps 0.036 0.029 0.025 0.018
Nk Vel 576 514 480 411
1200
Ps 0.052 0.041 0.036 0.026
Nk Vel 672 600 560 480
1400
Ps 0.07 0.056 0.049 0.036
Nk Vel 768 686 640 549
1600
Ps 0.092 0.073 0.064 0.047
Nk Vel 857 800 686
2000
Ps 0.114 .100 0.073
30-35
Nk Vel 857
2500
Ps 0.114
NC 30 - 35
REGISTERS
GRILLES &
SERIES 4002R PERFORMANCE
CFM 48 x 14 34 x 16 40 x 18 48 x 18 40 x 24 42 x 24 48 x 24 48 x 30 48 x 36 48 x 48 NC
Nk Vel 212
800
Ps 0.007
Nk Vel 214 265 200
1000
Ps 0.007 0.011 0.006
Nk Vel 257 318 240 200
1200
Ps 0.01 0.016 0.009 0.006
Nk Vel 300 371 280 233 210 200
1400
Ps 0.014 0.021 0.012 0.008 0.007 0.006
20
Nk Vel 343 424 320 267 240 229 200
1600
Ps 0.018 0.028 0.016 0.011 0.009 0.008 0.006
Nk Vel 429 529 400 333 300 286 250 200
2000
Ps 0.029 0.044 0.025 0.017 0.014 0.013 0.01 0.006
Nk Vel 536 662 500 417 375 357 313 250 208
2500
Ps 0.045 0.068 0.039 0.027 0.022 0.02 0.015 0.01 0.007
4002R
Nk Vel 643 794 600 500 450 429 375 300 250
3000
Ps 0.064 0.098 0.056 0.039 0.031 0.029 0.022 0.014 0.01
Nk Vel 750 700 583 525 500 438 350 292 219
3500
Ps 0.087 0.076 0.053 0.043 0.039 0.03 0.019 0.013 0.007
Nk Vel 857 800 667 600 571 500 400 333 250
4000 25-30
Ps 0.114 0.1 0.069 0.056 0.051 0.039 0.025 0.017 0.01
Nk Vel 900 750 675 643 563 450 375 281
4500
Ps 0.129 0.089 0.072 0.066 0.05 0.032 0.022 0.013
NC 30 - 35 25 - 30
PERFORMANCE NOTES FOR SERIES 4002R

DEFINITION OF UNITS
Nk Vel Neck Velocity is the airstream velocity in the duct just before it reaches the supply outlet; measured in Feet per Minute
Throw* Non-isothermal horizontal throw (supply air temperature 15F colder than average room temperature);
Vn Neck Velocity

REGISTERS
GRILLES &
MODEL CC
The CC series cubed core return and exhaust grilles is designed with
high free area and low sound and pressure drops. The CC5 series is
ideal for applications with size restrictions or as a pressurized ceiling
return. The CC series is available in grid sizes 1/2" x 1/2" x 1/2"

(CC5), 1/2" x 1/2" x1" (CC15) and 1" x 1" x1" (CC1).
Aluminum construction
Optional steel frame with aluminum core (CC5S)
Available with removable core (CC5R)
Model: CC5-1 ( Sidewall / Ceiling Return Grille - Surface Mount )
Duct Size = Listed Size

1
5 Listed Size - 4 1 38
32
CC
1
14 x x Cube Core
Model: CC5-6 ( Ceiling Return Grille - Lay in T-Bar ) 5

8
T-Bar Module = Listed Size
1
Overall Dimension = T-Bar Module - 4
1
Listed Size - 4 1 38
5 1
14 x x Cube Core
32
Model: CC5-7 ( Sidewall / Ceiling Return Grille - Concealed T-Bar )

1/4 Turn Latch
1
Listed Size - 4 Concealed
Kerfs (2) Locks On
(18 x 18 or Smaller) Concealed T-Bar T-Bar
1 38
x x Cube Core Lay-In Filler Panel

1
Overall Panel = T-Bar Module - 16
Model: CC5-8 ( Sidewall / Ceiling Return Grille - Tegular Lay in T-Bar )
1
Overall Diffuser = T-Bar Module - 4
1
Listed Size - 4
(18 x 18 or Smaller)
Filler Panel
1 38
3 Lay-In Filler Panel x x Cube Core

8
22 7 x 22 7 Overall Face
8 8
REGISTERS
GRILLES &
Model: CC5-TBC-6 ( Sidewall Return Grille - Lay in T-Bar - Channel Frame )
1
Standard T-Bar Spacing - 4
1 5
2 8
Model: CC5-TBC-6 ( Sidewall Return Grille - Lay in T-Bar - Channel Frame )

1
2 Standard T-Bar Spacing - 1
Extruded Aluminum 4 T-Bar5(By Others)
1
Channel 2Frame (All Around) 8
Model:CC5-TBC-6
Model: CC5R-6 1( Ceiling Return
( Sidewall Grille
Return - Lay
Grille ininT-Bar
- Lay T-Bar) -Removable Core)
Channel Frame
2
Extruded Aluminum 1
Standard T-Bar Spacing - 4 T-Bar (By Others)
Overall Dimension
Channel = T-Bar Module - 1
1 Frame (All Around) 4 5
T-Bar (By Other) 2 Listed Size - 1 8
4 13
Model: CC5R-6 ( Ceiling Return Grille - Lay in T-Bar ) Removable8Core
1
2
5 Extruded
Overall
14 Aluminum
1 Dimension
x x=T-Bar
Cube Module 1
Core -T-Bar (By Others)
32 Channel Frame (All Around) 4
T-Bar (By Other) 1
Listed Size - 4
1 38
Model: CC5R-6 ( Ceiling Return Grille - Lay in T-Bar ) Removable Core
Model: CC5-9
5 ( Sidewall 1Return Grille - Donn Fineline
1
Lay in )
Overall x
1 4 Dimension x Cube
= T-Bar Core
Module -4
32
1
T-Bar (By Other) Overall Panel =1 T-Bar Spacing - 4
Listed Size - 4
1 1 38
CC
Listed Size - 4
(20 x 20 or Smaller) 1 38
Model: CC5-9
5 ( Sidewall
Lay-In
1 Return Grille - Donn Fineline Lay in )
Filler Panel
14 x x Cube Core
32
1
x x Cube
1 Core
Listed Size - 4
23 3x x2023or3Smaller)
(20 Overall Face 1 38
Model: CC5-9 Lay-In
( Sidewall Return Grille 4- Donn
Filler Panel 4 Fineline Lay in )
1
xSize
Listed x-1 Cube Core
4
(20 x 20 1 38
Lay-In Filler Panel
3 or Smaller)
3
x x Cube Core
23 3 3
4 x 23 4 Overall Face
Model: CC1-1 ( Side wall / Ceiling Return Grille - Surface Mount )

1
5
32
1
14 1 x 1 x 1 Cube Core
Model: CC1-6 ( Ceiling Return Grille - Lay in T-Bar )

1
Listed Size - 2 41 1 38
2013 Metal Industries, Inc. 1

14
7 GR95
8
1
5
REGISTERS 32
GRILLES &
1
14 1 x 1 x 1 Cube Core

1
Listed Size - 2 41 1 38
1 7
14 8
CC1-6 and Listed Size

CC1 - 6For
andExposed
Listed Size T-Bar Lay-in
for Exposed T-barGrid Applications
Lay-in Grid Applications
12 x 12 12 x 12 2424
x 12x 12 4848x x12
12 24 x 2424 x 12
Overall Dimension
Overall Dimension
11 3/411
x 113/4
3/4x 11 3/4 23233/4 x 11
3/4 3/43/4 47 3/4
x 11 47 3/4 x 11
x 11 3/423 3/4 x23
3/4 233/4
3/4x 23 3/4
Model: CC1-7 ( Side wall / Ceiling Return Grille - Concealed T-Bar )

CC
Concealed 1
Listed Size - 4 1/4 Turn Latch
T-Bar
Kerfs (2) (18 x 18 or Smaller) Locks On
Concealed T-Bar
1 38
1x1x1 Lay-In
Cube Core Filler Panel
1
Model: CC1-8 ( Side wall / Ceiling Return Grille - Tegular Lay in T-Bar )
1
1
Listed Size - 4
(18 x 18 or Smaller) 1 38 1x1x1
Cube Core
Lay-In Filler Panel 1 x 1 x 1 Cube Core

3
22 7
8
x 22 7 Overall Face
8 8
Face View
Model: CC1-TBC (Side wall Return Grille) Model: CC1-9 ( Side wall Return Grille - Donn Fineline Lay in )
( Lay in T-Bar - Channel Frame )
1
1
Standard T-Bar Spacing - 4 1 x 1 x 1 Cube Core
1
Listed Size - 4
1 1
18
(18 x 18 or Smaller) 1 38
Extruded Aluminum
Channel Frame (All Around) T-Bar (By Others) Lay-In Filler Panel 1 x 1 x 1 Cube Core
23 3 3
REGISTERS
GRILLES &
Model: CC15-1 ( Sidewall / Ceiling Return Grille - Surface Mount )

1
5
32
1 xx1
14 Cube Core
1
Overall Dimension = T-Bar Module - 4 1
8
T-Bar Grid Size - 2 38 1 38
5 1
14 xx1 7
32 Cube Core 8
CC
CC15-6 and Listed Size
CC15 - 6 and Listed Size for Exposed T-bar Lay-in Grid Applications
For Exposed T-Bar Lay-in Grid Applications
12 x 12 24 x 12 48 x 12 24 x 12
12 x 12 24 x 12 48 x 12 24 x 24
Overall Dimension
Overall Dimension
11 3/4 x 11 3/4 23 3/4 x 11 3/4 47 3/4 x 11 3/4 23 3/4 x 23 3/4
11 3/4 x 11 3/4 23 3/4 x 11 3/4 47 3/4 x 11 3/4 23 3/4 x 23 3/4
Model: CC15-7 ( Sidewall / Ceiling Return Grille - Concealed T-Bar )
1
Listed Size - 4 1/4 Turn Latch
(18 x 18 or Smaller) Locks On
Kerfs (2) Concealed T-Bar Conce
T-Bar
1 38
xx1 Lay-In
1
1
1
Listed Size - 4
1 38

xx1 Lay-In
Cube Core 3
(18 x 18 or Smaller) Locks On
Kerfs (2) Concealed T-Bar Conce
T-Bar
1 38
REGISTERS
GRILLES &
xx1 Lay-In
1
1
1
Listed Size - 4
1 38
xx1 Lay-In
Cube Core Filler Panel 3
8
22 8 8
Model: CC15-TBC ( Side wall Return Grille - Lay in T-Bar - Channel Frame )
Standard T-Bar
Spacing - 1/4 1 1
Model: CC15-TBC ( Side wall Return Grille - Lay 2inx 2T-Bar - Core
x 1 Cube Channel Frame )
CC
1
2
Standard T-Bar
Spacing - 1/4
1 12
1 x 1 x 1
2 Cube Core
1 8
2
Extruded Aluminum 1
1T-Bar (By Others)
Channel Frame (All Around) 8
Extruded Aluminum
T-Bar (By Others)
Model: CC15-9 (Channel
Side wall Return
Frame Grille - Donn Fineline Lay in )
(All Around)
Model: CC15-9 ( Side wall Return

Overall Panel = Grille - Donn
T-Bar Spacing - 1Fineline Lay in )
4
1
Listed Size - 4
(18 x 18 or Smaller) 1
Lay-In Filler Panel Overall Panel = T-Bar Spacing - 4
1
Listed Size - 4
Lay-In Filler Panel 1/2 x1/2 x 1 Cube Core
3 3
1/2 x1/2 x 1 Cube Core
23 3 3
REGISTERS
GRILLES &
SERIES CC5 SPECIFICATIONS
RETURN CUBED CORE Performance Specification
ALUMINUM MODELS CC5/CC15/CC1 The manufacturer shall provide published performance
Air inlets shall be model CC5 (1/2" x 1/2" x 1/2"), data. Data shall be tested in accordance to ANSI/
CC15 (1/2" x 1/2" x 1") or CC1 (1" x 1" x 1") manufactured ASHRAE Standard 70-2006.
by METALAIRE. Units shall be return or exhaust grille of
aluminum construction. The units shall be the size and Paint Specification
quantity as outlined in the plans and specifications. The Process shall be anodic electro-deposition using an
border shall be 1 1/4" wide with an aluminum cubed core. anodic acrylic paint. Units shall undergo pre-treatment
The units shall be designed to integrate into the specified including a pressurized spray stage using an alkaline
ceiling system. cleaner and a de-ionized water rinse.
Damper must be operable from the face of the diffuser.
CC

REGISTERS
GRILLES &
CC5 MODEL NUMBER SPECIFICATION

SIDEWALL RETURN GRILLE CUBE CORE SURFACE MOUNT
Model Neck
CC5-1 1/2 x 1/2 x 1/2 Cube Core 6 8 10 12 14 16 18 20 22 24 26
CC5S-1 1/2 x 1/2 x 1/2 Cube Core with Steel Frame 4 X X X X X X X X X X X

CC15-1 1/2 x 1/2 x 1 Cube Core 5 X X X X X X X X X X X
CC1-1 1 x 1 x 1 Cube Core 6 X X X X X X X X X X X
CC

Available Options
NSH No Screw Holes
REGISTERS
GRILLES &
SIDEWALL RETURN GRILLE CUBE CORE SURFACE MOUNT
Model Neck
CC5-1 1/2 x 1/2 x 1/2 Cube Core 28 30 32 34 36 38 40 42 44 46 48
CC5S-1 1/2 x 1/2 x 1/2 Cube Core with Steel Frame 4 X X X X X X X X X X X
CC15-1 1/2 x 1/2 x 1 Cube Core 5 X X X X X X X X X X X
CC1-1 1 x 1 x 1 Cube Core 6 X X X X X X X X X X X
CC

Available Options
NSH No Screw Holes

REGISTERS
GRILLES &

SIDEWALL RETURN GRILLE CUBE CORE LAY-IN
Model Neck
CC5-6 1/2 x 1/2 x 1/2 Cube Core 6 8 10 12 14 16 18 20 22 Module
CC5S-6 1/2 x 1/2 x 1/2 Cube Core with Steel Frame 4 X X

CC15-6 1/2 x 1/2 x 1 Cube Core 6 X X
12 x 12
CC1-6 1 x 1 x 1 Cube Core 8 X X
10 X
4 X X X X X X X X
6 X X X X X X X X
24 x 12
8 X X X X X X X X
10 X
4 X X X X X X X X
6 X X X X X X X X
8 X X X X X X X X
10 X X X X X X X X
12 X X X X X X X X
CC
24 x 24
14 X X X X X X X X
16 X X X X X X X X
18 X X X X X X X X
20 X X X X X X X X
22 X

REGISTERS
GRILLES &
Model Neck
CC5-6 1/2 x 1/2 x 1/2 Cube Core 6 8 10 12 14 16 18 20 22 Module
CC5S-6 1/2 x 1/2 x 1/2 Cube Core with Steel Frame 4 X X X X X X X X X
CC15-6 1/2 x 1/2 x 1 Cube Core 6 X X X X X X X X X
CC1-6 1 x 1 x 1 Cube Core 8 X X X X X X X X X
36 x 24
22
4 X X X X X X X X X
6 X X X X X X X X X
8 X X X X X X X X X
CC
18 X X X X X X X X X 36 x 36


REGISTERS
GRILLES &

Model Neck
CC5-6 1/2 x 1/2 x 1/2 Cube Core 6 8 10 12 14 16 18 20 22 26 Module
CC5S-6 1/2 x 1/2 x 1/2 Cube Core with Steel Frame 4 X X X X X X X X X X

CC15-6 1/2 x 1/2 x 1 Cube Core 6 X X X X X X X X X X
CC1-6 1 x 1 x 1 Cube Core 8 X X X X X X X X X X
48 x 24
22
CC
24 X X X X X X X X X X 48 x 48

REGISTERS
GRILLES &
Model Neck
CC5-6 1/2 x 1/2 x 1/2 Cube Core 28 30 32 34 36 38 40 42 44 46 Module
CC5S-6 1/2 x 1/2 x 1/2 Cube Core with Steel Frame 4 X X X X X X X X X
CC15-6 1/2 x 1/2 x 1 Cube Core 6 X X X X X X X X X
CC1-6 1 x 1 x 1 Cube Core 8 X X X X X X X X X
48 x 24
22 X
4 X X X X X X X X X
6 X X X X X X X X X
8 X X X X X X X X X
CC
48 x 48
46 X


REGISTERS
GRILLES &

Model Neck
CC5-7 1/2 x 1/2 x 1/2 Concealed Spline Ceiling 6 8 10 12 14 16 18 20 Module
CC5-8 1/2 x 1/2 x 1/2 Tegular Ceiling 4 X X X X X X X X

CC5-9 1/2 x 1/2 x 1/2 Donn Fineline/Bolt Slot Ceiling 6 X X X X X X X X
CC15-7 1/2 x 1/2 x 1 Concealed Spline Ceiling 8 X X X X X X X X
CC15-8 1/2 x 1/2 x 1 Tegular Ceiling 10 X X X X X X X X
CC51-9 1/2 x 1/2 x 1 Donn Fineline/Bolt Slot Ceiling 12 X X X X X X X X 24 x 24
CC1-7 1 x 1 x 1 Concealed Spline Ceiling 14 X X X X X X X X
CC1-8 1 x 1 x 1 Tegular Ceiling 16 X X X X X X X X
CC1-9 1 x 1 x 1 Donn Fineline/Bolt Slot Ceiling 18 X X X X X X X X
20 X X X X X X X X

CC

02 Satin Silver
03 Black
24 Mill
28 Custom Color

CUBE CORE LAY-IN CORE ONLY
Model Neck
CC5TBC-6 1/2 x 1/2 x 1/2 6 8 10 12 14 16 18 20 22 24 26
12 X X X X X X X X
14 X X X X X X X
16 X X X X X X
18 X X X X X
20 X X X X
22 X X X
24 X X
26 X
REGISTERS
GRILLES &
CUBE CORE LAY-IN CORE ONLY
Model Neck
CC5TBC-6 1/2 x 1/2 x 1/2 28 30 32 34 36 38 40 42 44 46 48
34 X X X X X X X X
36 X X X X X X X
38 X X X X X X
40 X X X X X
42 X X X X
44 X X X
46 X X
48 X
Available Finishes
CC
Standard
01 White
Optional
02 Satin Silver
03 Black
24 Mill
28 Custom Color

CUBE CORE LAY-IN REMOVABLE CORE
Model Cores Available Finishes
CC5R-6 1/2 x 1/2 x 1/2 12 24 36 48 Standard
12 X X X X 01 White
24 X X X Optional
02 Satin Silver
03 Black
24 Mill
28 Custom Color

REGISTERS
GRILLES &
SERIES CC PERFORMANCE DATA

MODELS CC5, CC15, CC1
Size
CFM 6x6 8x8 10 x 10 12 x 12 14 x 14 16 x 14 16 x 16 18 x 16 18 x 18 20 x 18 20 x 20 22 x 20 22 x 22 24 x 22
Velocity 400 225

100
Ps .064 .055
150
Ps .082 .060 .054
Velocity 800 450 288 200
200
Ps .107 .068 .057 .054
250
Ps .078 .062 .056
Velocity 675 432 300 220
300
Ps .091 .067 .058 .054
Velocity 787 504 350 257 225
350
Ps .105 .073 .061 .056 .055
Velocity 900 576 400 294 257 225 200
CC
400
Ps .122 .080 .064 .058 .056 .055 .054
Velocity 648 450 331 289 253 225 200
450
Ps .087 .068 .060 .057 .056 .055 .054
Velocity 720 500 367 321 281 250 222 200
500
Ps .096 .072 .062 .059 .057 .056 .054 .054
Velocity 792 550 404 354 309 275 244 220
550
Ps .106 .077 .065 .061 .059 .057 .055 .054
Velocity 864 600 441 386 338 300 267 240 216
600
Ps .116 .082 .067 .063 .060 .058 .056 .055 .054
Velocity 650 478 418 366 325 289 260 234 213
650
Ps .088 .070 .066 .062 .059 .057 .056 .055 .054
Velocity 700 514 450 394 350 311 280 252 229 208
700
Ps .094 .074 .068 .064 .061 .059 .057 .056 .055 .054
Velocity 750 551 482 422 375 333 300 270 245 223 205
750
Ps .100 .077 .071 .066 .063 .060 .058 .056 .055 .054 .054
NC 25-30 20-25 <20
REGISTERS
GRILLES &
SERIES CC PERFORMANCE DATA
MODELS CC5, CC15, CC1
Size
CFM 24 x 24 26 x 26 28 x 28 30 x 30 32 x 32 48 x 24 34 x 34 36 x 36 38 x 38 40 x 40 42 x 42 44 x 44 46 x 46 48 x 48 NC
Velocity 200
800
Ps .003
Velocity 250 213
1000
Ps .005 .004
1200
Ps .008 .006 .004

Velocity 400 341 294 256 225 200
1600
Ps .014 .010 .007 .006 .004 .003

Velocity 500 426 367 320 281 250 249 222
2000
Ps .021 .015 .011 .009 .007 .005 .005 .004

Velocity 625 533 459 400 352 313 311 278 249 225 204
2500
Ps .033 .024 .018 .014 .010 .008 .008 .007 .005 .004 .004
Velocity 750 639 551 480 422 375 374 333 299 270 245 223 204
CC
3000
Ps .048 .035 .026 .020 .015 .012 .012 .009 .008 .006 .005 .004 .004
Velocity 875 746 643 560 492 438 436 389 349 315 286 260 238 219 <20
3500
Ps .065 .047 .035 .027 .021 .016 .016 .013 .010 .008 .007 .006 .005 .004
Velocity 852 735 640 563 500 498 444 399 360 327 298 272 250
4000
Ps .062 .046 .035 .027 .021 .021 .017 .013 .011 .009 .008 .006 .005
Velocity 827 720 633 563 561 500 449 405 367 335 306 281
4500
Ps .058 .044 .034 .027 .027 .021 .017 .014 .011 .010 .008 .007
Velocity 800 703 625 623 556 499 450 408 372 340 313
5000
Ps .054 .042 .033 .033 .026 .021 .017 .014 .012 .010 .008
Velocity 800 750 747 667 598 540 490 446 408 375
6000
Ps .104 .048 .047 .038 .030 .025 .020 .017 .014 .012
Velocity 875 872 778 698 630 571 521 476 438
7000
Ps .065 .064 .051 .041 .034 .028 .023 .019 .016

Velocity 889 798 720 653 59*5 544 500
8000
Ps .067 .054 .044 .036 .030 .025 .021

NC 30-35 25-30 20-25
PERFORMANCE NOTES FOR SERIES CC

DEFINITION OF UNITS

REGISTERS
GRILLES &
MODEL RP
The RP series perforated face return or exhaust grilles is designed
to blend into the ceiling system and provide a clean, uncluttered
architectural appearance. The RP series is ideal for commercial
or industrial applications which require low resistance and high to

medium air volume. The RP series is available in aluminum (RP) and
steel (SRP) construction.
Low pressure drop and sound
Blends into the ceiling design

RP
RP - 6 List Sizes
For Exposed T-Bar Lay-In Grid Application
12 x 12 24 x 12 24 x 24 36 x 24 48 x 24 36 x 36 48 x 48
Overall Face Dimensions
11 3/4 x 11 3/4 23 3/4 x 23 3/4 23 3/4 x 23 3/4 35 3/4 x 23 3/4 47 3/4 x 23 3/4 35 3/4 x 35 3/4 47 3/4 x 47 3/4
REGISTERS
GRILLES &
SERIES RP SPECIFICATIONS
RETURN PERFORATED FACE Performance Specification
ALUMINUM/STEEL MODELS RP/SRP The manufacturer shall provide published performance
Air inlets shall be model RP/SRP manufactured by data. Data shall be tested in accordance to ANSI/
METALAIRE. Units shall be perforated face, return ASHRAE Standard 70-2006.
or exhaust grilles of aluminum (RP) or steel (SRP)
construction. The units shall be the size and quantity Paint Specification
as outlined in the plans and specifications. The border Process shall be anodic electro-deposition using an
shall be 1 1/4" wide with a perforated face of 3/16" anodic acrylic paint. Units shall undergo pre-treatment
diameter holes on 1/4" center and a 51% free area. including a pressurized spray stage using an alkaline
Units shall be designed for surface mounting, with cleaner and a de-ionized water rinse.
countersunk screw holes on the face of the device, or
RP

REGISTERS
GRILLES &
RP MODEL NUMBER SPECIFICATION

SIDEWALL RETURN GRILLE PERFORATED FACE SURFACE MOUNT
RP-1 Aluminum 6 8 10 12 14 16 18 20 22 24 Standard
SRP-1 Steel 4 X X X X X X X X X X 01 White

5 X X X X X X X X X X Optional
6 X X X X X X X X X X 02 Satin Silver
8 X X X X X X X X X X 03 Black
10 X X X X X X X X X X 24 Mill (Aluminum Construction Only)
12 X X X X X X X X X X 28 Custom Color
RP
L9 Equalizing Grid
PF Plaster Frame
LIPF Lay-in Plaster Frame
IS Insect Screen
TR Square to Round Transition
Available Options
NSH No Screw Holes
REGISTERS
GRILLES &
SIDEWALL RETURN GRILLE PERFORATED FACE SURFACE MOUNT
RP-1 Aluminum 26 28 30 32 34 36 38 40 42 44 46 48 Standard
SRP-1 Steel 4 X X X X X X X X X X X X 01 White
5 X X X X X X X X X X X X Optional
6 X X X X X X X X X X X X 02 Satin Silver
8 X X X X X X X X X X X X 03 Black
10 X X X X X X X X X X X X 24 Mill (Aluminum Construction Only)
12 X X X X X X X X X X X X 28 Custom Color
14 X X X X X X X X X X X X
RP
L9 Equalizing Grid
PF Plaster Frame
IS Insect Screen
Available Options
NSH No Screw Holes

REGISTERS
GRILLES &

RETURN GRILLE PERFORATED FACE LAY-IN
Model Neck
RP-6 Aluminum 6 8 10 12 14 16 18 20 22 24 Module
SRP-6 Steel 4 X X
6 X X
12 x 12
8 X X
10 X
4 X X X X X X X X
6 X X X X X X X X
24 x 12
8 X X X X X X X X
10 X
4 X X X X X X X X
6 X X X X X X X X
8 X X X X X X X X
10 X X X X X X X X
12 X X X X X X X X
RP
24 x 24
14 X X X X X X X X
16 X X X X X X X X
18 X X X X X X X X
20 X X X X X X X X
22 X
12 X X X X X X X X X X 48 x 24

REGISTERS
GRILLES &
Model Neck
RP-6 Aluminum 26 28 30 32 34 36 38 40 42 44 46 Module
SRP-6 Steel 4 X X X X X X X X X X
48 x 24
22 X

RP

REGISTERS
GRILLES &

Model Neck
RP-6 Aluminum 6 8 10 12 14 16 18 20 22 24 Module
24 X X X X X X X X X X 48 x 48
RP

REGISTERS
GRILLES &
Model Neck
RP-6 Aluminum 26 28 30 32 34 36 38 40 42 44 46 Module
48 x 48
RP
46 X


REGISTERS
GRILLES &
SERIES RP PERFORMANCE DATA

MODELS RP, SRP
Size
CFM 8x8 10 x 10 12 x 12 14 x 14 16 x 16 18 x 18 20 x 20 22 x 22 24 x 24 30 x 24 36 x 24 40 x 24 44 x 24 48 x 24 NC
Nk Vel 450 288 200

200
Ps 0.003 0.001 0.001

Nk Vel 900 576 400 294 225
400
Ps 0.012 0.005 0.002 0.001 0.001

Nk Vel 864 600 441 338 267 216
600
Ps 0.011 0.005 0.003 0.002 0.001 0.001

Nk Vel 800 588 450 356 298 238 200
800
Ps 0.01 0.005 0.003 0.002 0.001 0.001 0.001

Nk Vel 735 563 444 360 298 250 200
1000
Ps 0.008 0.005 0.003 0.002 0.001 0.001 0.001

Nk Vel 882 675 533 432 357 300 240 200
1200
Ps 0.012 0.007 0.004 0.003 0.002 0.001 0.001 0.001

Nk Vel 787 622 504 417 350 280 233 210
RP
1400
Ps 0.009 0.006 0.004 0.003 0.002 0.001 0.001 0.001
25-30
Nk Vel 900 711 576 476 400 320 267 240 218 200
1600
Ps 0.012 0.008 0.005 0.003 0.002 0.002 0.001 0.001 0.001 0.001
Nk Vel 800 648 536 450 360 300 270 245 225
1800
Ps 0.01 0.006 0.004 0.003 0.002 0.001 0.001 0.001 0.001

Nk Vel 889 720 595 500 400 333 300 273 250
2000
Ps 0.012 0.008 0.005 0.004 0.002 0.002 0.001 0.001 0.001

Nk Vel 864 714 600 480 400 360 327 300
2400
Ps 0.011 0.008 0.005 0.004 0.002 0.002 0.002 0.001

Nk Vel 833 700 560 467 420 382 350
2800
Ps 0.011 0.007 0.005 0.003 0.003 0.002 0.002

Nk Vel 800 640 533 480 436 400
3200
Ps 0.011 0.006 0.004 0.004 0.003 0.002

Nk Vel 900 720 600 540 491 450
3600
Ps 0.012 0.008 0.005 0.004 0.004 0.003

NC 35-40 30-35
PERFORMANCE NOTES FOR SERIES RP

DEFINITION OF UNITS
Nk Vel Neck Velocity of air stream in Feet per Minute
REGISTERS
GRILLES &
SPIRAL DUCT GRILLES
SPIRAL DUCT GRILLES

METALAIRE spiral duct grilles are designed specifically for mounting on a round or spiral duct
eliminating the need for a contractor fabricated register tab.
Aluminum/Steel Spiral Duct Mounted Grille

The 4004P series of spiral duct grilles offers a double deflection and perforated face supply as well as a
perforated face return. The 4004P series is designed so that the flange meets flush to the duct regardless
of the duct diameter.
4004P Aluminum Double deflection supply
4004SP Steel Double deflection supply
4000PFS Aluminum Perforated face supply
4000SPFS Steel Perforated face supply
4000PFR Aluminum Perforated face return
4000SPFR Steel Perforated face return

PAGE 120

REGISTERS
GRILLES &
MODEL 4004P
The 4004P series offers superior performance and a clean low
profile appearance. This series is available as
a double deflection supply (4004P/4004SP)
SPIRAL DUCT GRILLES
or perforated face supply (4000PFS/4000SPFS)

and a perforated face return (4004PFR/4000SPFR).
The 4004P series is designed specifically for direct mounting
onto spiral duct. This series is available in
aluminum (4004P/4000PFS/4000PFR)
and steel (4004SP/4000SPFS/4000SPFR) construction.
Vertical front blades on double deflection models
Integral gaskets seal grille tightly to duct
Includes built-in extractor on supply unit to allow accurate balancing and uniform air flow
Available for duct diameters 10" to 48" (see table Page 122)
4004P
REGISTERS
GRILLES &
SERIES 4004P SPECIFICATIONS
SUPPLY/RETURN SPIRAL DUCT GRILLE Performance Specification
ALUMINUM/STEEL The manufacturer shall provide published performance
data. Data shall be tested in accordance to ANSI/
MODELS 4004P/4004SP/4000PFS/4000
SPS/4000PFR/4000SPFR
SPIRAL DUCT GRILLES

Air outlets shall be model 4004P/4004SP/4000PFS/ Paint Specification
4000SPFS/4000PFR/4000SPFR manufactured by Process shall be anodic electro-deposition using an
METALAIRE. Supply units shall be double deflection anodic acrylic paint. Units shall undergo pre-treatment
(4004P/4004SP) with adjustable front and rear blades including a pressurized spray stage using an alkaline
or perforated face (4000PFS/4000SPFS). Return units cleaner and a de-ionized water rinse.
shall be perforated face (4000PFR/4000SPFR). The
units shall be aluminum (4004P/4000PFS/4000PFR) or
steel (4004SP/4000SPFS/4000SPFR) construction and
shall be size and quantity as outlined in the plans and
specifications. The supply units shall include an air
extractor mounted on the back of the grille. The extractor
shall be face operated using an extractor adjustment
rod. The grille shall conform tightly to the duct radius
4004P
and include a foam gasket around the sides and end
caps of the unit. The border shall be 15/16" wide on both
the double deflection and perforated units. The double
deflection units shall have aerodynamically shaped
deflector blades on 2/3" center. The deflector blades
shall be individually adjustable. The blades shall pivot in
polymer friction mounting retainers. The retainers shall
hold the deflector blade position throughout the specified
operating range of the device. The perforated units shall
have 3/16" diameter holes on 1/4" center for a 51% free
area. The units shall be designed for surface mounting
with countersunk screw holes on the face of the device.

REGISTERS
GRILLES &
4004P MODEL NUMBER SPECIFICATION

SPIRAL DUCT GRILLE
Model Width Height Available Finishes
4004P Aluminum - Double Deflection Supply Standard
4004SP Galvanized Steel - Double Deflection Supply 01 White (Aluminum Construction)
SPIRAL DUCT GRILLES
4000PFS Aluminum - Perforated Supply 24 Mill (Galvanized Steel Construction)

10 - 48 3 - 12
4000SPFS Galvanized Steel - Perforated Supply Optional Aluminum Construction
4000PFR Aluminum - Perforated Return 02 Satin Silver
4000SPFR Galvanized Steel - Perforated Return 03 Black
Available Options
NSH No Screw Holes
Available in Listed Sizes Only
Width
4004P
10 12 14 16 18 20 24 30 36 38 40 42 44 46 48
Height Minimum / Maximum Duct Diameter
3 6/24 6/24 6/24 6/24 6/24 6/24 6/24 6/24 6/24 6/24 6/24 6/24 6/24 6/24 6/24
4 8/24 8/24 8/24 8/24 8/24 8/24 8/24 8/24 8/24 8/24 8/24 8/24 8/24 8/24 8/24
6 12/24 12/24 12/24 12/24 12/24 12/24 12/24 12/24 12/24 12/24 12/24 12/24 12/24 12/24 12/24
8 - - 20/36 20/36 20/36 20/36 20/36 20/36 20/36 20/36 20/36 20/36 20/36 20/36 20/36
10 - - - - 30/48 30/48 30/48 30/48 30/48 30/48 30/48 30/48 30/48 30/48 30/48
12 - - - - 42/48 42/48 42/48 42/48 42/48 42/48 42/48 42/48 42/48 42/48 42/48
REGISTERS
GRILLES &
SERIES 4004P PERFORMANCE DATA
MODELS 4004P, 4004SP
Size
24 x 3 16 x 6 14 x 8 16 x 8 24 x 6
10 x 4 16 x 3 18 x 3 10 x 6 12 x 6 14 x 6 24 x 4 18 x 6 20 x 6 18 x 8
CFM 10 x 3 12 x 3 14 x 3 12 x 4 14 x 4 20 x 3 16 x 4 18 x 4 20 x 4 30 x 3 36 x 3 30 x 4 36 x 4
SPIRAL DUCT GRILLES

Velocity 225
Ps .006
50
Throw 11-8-6
Velocity 450 400 360 300 260 240 225 200
100
Ps .025 .020 .016 .011 .008 .007 .006 .005

Throw 18-13-10 17-13-10 16-12-19 15-11-9 14-10-9 14-10-8 14-10-8 13-10-7
Velocity 675 600 540 450 400 360 340 300 270 225
150
Ps .056 .048 .036 .025 .020 .016 .014 .011 .009 .001
Throw 23-17-13 22-16-12 22-15-12 20-14-11 19-14-10 19-13-10 19-13-10 18-13-10 17-12-9 16-11-9
Velocity 900 800 720 600 530 480 450 400 360 300 260 225 200
200
Ps .099 .082 .064 .044 .035 .028 .025 .020 .016 .011 .008 .006 .005
4004P
Throw 28-20-16 27-19-15 26-19-14 25-18-14 24-16-13 23-16-13 23-16-12 22-15-12 21-15-11 20-14-11 19-13-10 18-13-10 17-12-9
Velocity 750 660 600 565 500 450 375 330 281 250
250
Ps .069 .054 .044 .039 .031 .025 .017 .013 .010 .008
Throw 29-20-16 28-19-15 27-19-15 27-19-15 25-18-14 24-17-13 23-16-13 22-15-12 21-15-11 20-14-11
Velocity 900 800 720 675 600 540 450 400 338 300
300
Ps .099 .080 .064 .055 .044 .036 .025 .021 .014 .011
Throw 33-23-18 31-21-17 30-21-17 29-21-17 28-20-16 27-19-15 2-18-14 25-18-13 23-17-13 22-16-12
Velocity 900 800 720 600 535 450 400
400
Ps .091 .079 .064 .044 .036 .025 .020

Throw 37-30-22 35-25-19 33-24-18 31-22-17 30-22-18 28-20-16 27-19-15
Velocity 750 665 563 500
500
Ps .069 .052 .039 .031

Throw 37-26-20 36-25-20 33-23-18 32-23-17
600
Ps .070 .056 .044

Throw 41-29-23 38-27-21 36-26-20
Velocity 787 700
700
Ps .076 .060
Throw 42-30-23 40-28-22

REGISTERS
GRILLES &
SERIES 4000P PERFORMANCE DATA

MODELS 4004P, 4004SP
Size
48 x 4 20 x 12 48 x 6 46 x 8
16 x 10 30 x 6 20 x 10 36 x 6 30 x 8 36 x 8 36 x 10 38 x 10 40 x 12
CFM 20 x 8 18 x 10 24 x 8 18 x 12 24 x 10 24 x 12 30 x 10 30 x 12 48 x 8 36 x 12 48 x 10 48 x 12
SPIRAL DUCT GRILLES
Velocity 225 200

250
Ps .006 .005
Throw 19-14-11 18-13-10
Velocity 270 240 215 200
300
Ps .009 .007 .006 .005

Throw 22-15-12 21-15-11 20-15-11 19-14-10
Velocity 360 320 288 265 240 200
400
Ps .016 .013 .010 .008 .007 .005

Throw 26-19-14 25-18-14 24-17-14 23-17-13 23-16-13 22-15-12
Velocity 450 400 360 330 300 250 240 200
500
Ps .025 .020 .017 .014 .011 .008 .007 .005

Throw 31-22-17 29-21-16 29-20-16 28-20-15 27-19-15 25-18-14 25-18-14 23-17-13
4004P
Velocity 540 480 435 400 360 300 288 240 225 200
600
Ps .036 .028 .024 .019 .016 .011 .010 .007 .006 .005
Throw 35-25-19 33-24-18 32-23-18 31-22-17 30-21-17 28-20-16 28-20-15 26-19-14 24-17-14 25-18-14
Velocity 630 560 500 460 420 350 335 280 265 235 210
700
Ps .049 .038 .032 .027 .022 .016 .016 .010 .009 .007 .005
Throw 39-27-21 36-26-20 36-25-20 35-24-19 34-23-18 33-23-17 33-22-17 29-21-16 26-19-15 27-19-15 27-20-16
Velocity 575 535 480 400 384 320 300 267 240 200
800
Ps .037 .034 .028 .020 .018 .013 .011 .009 .008 .005
Throw 39-27-22 38-26-21 37-26-20 35-25-19 34-24-19 32-23-18 29-21-16 30-21-17 28-20-17 27-19-15
Velocity 660 600 500 480 400 375 333 300 250
1000
Ps .050 .044 .031 .028 .020 .017 .014 .012 .008

Throw 45-34-27 43-31-24 40-29-22 40-28-22 37-27-21 34-23-18 35-25-19 33-24-18 32-23-17
Velocity 720 600 576 480 450 411 360 300
1200
Ps .064 .044 .041 .028 .026 .021 .016 .011

Throw 49-35-27 46-33-25 45-32-25 42-30-23 39-28-21 40-29-22 38-28-21 36-26-20
Velocity 840 700 672 560 530 480 420 350
1400
Ps .087 .060 .055 .038 .032 .028 .022 .015

Throw 54-39-30 51-36-28 50-36-28 47-34-26 45-33-26 45-32-25 41-29-23 38-27-21
Velocity 600 530 480 400
1600
Ps .040 .031 .027 .019

Throw 48-34-26 47-34-27 44-31-26 40-29-23
1800
Ps .043 .034 .026

Throw 49-35-27 44-33-26 42-30-25
Velocity 500
2000
Ps .032
Throw 44-32-27
REGISTERS
GRILLES &
PERFORMANCE NOTES FOR SERIES 4000P
DEFINITION OF UNITS
SPIRAL DUCT GRILLES

Throw Non-isothermal horizontal throw (supply air temperature 15F colder than average
4004P

REGISTERS
GRILLES &
FILTER GRILLES
MODEL RHF
FILTER GRILLES
MODEL CC5 MODEL RPF
METALAIRE offers a complete line of return filter grilles available in steel or aluminum
construction with louvered, egg crate or perforated face design.
Aluminum/Steel Louvered Filter Grille

The RHF series of louvered filter grilles is available in aluminum or steel
construction and is designed to accept 1" or 2" filters (by others). The hinged
face design allows access to the filter and aids in the cleaning of the grille.
RHF Aluminum louvered face filter grille
RHEF Extruded aluminum louvered face filter grille
SRHF Steel louvered face filter grille PAGE 127
Aluminum Cubed Core Filter Grille

The CC5F series of cubed core filter grilles is available in aluminum
face design allows access to the filter and aids in the cleaning of the grille
CC5F Aluminum cubed core filter grille PAGE 136
Aluminum/Steel Perforated Filter Grille

The RPF series of perforated filter grilles is available in aluminum or steel
face design allows access to the filter and aids in the cleaning of the grille.
RPF Aluminum perforated filter grille
SRPF Steel perforated filter grille PAGE 145
REGISTERS
GRILLES &
MODEL RHF
The RHF series of louvered filter grilles combines the advantages
of rugged construction with attractive design and solid
performance. The RHF series is available in aluminum (RHF),
extruded aluminum (RHEF) and steel (SRHF) construction.
Horizontal blades fixed at 40 deflection
FILTER GRILLES
Hinged face for easy access to the filter
Optional fully removable face
Standard 1" filter rack
Optional 2" filter rack
RHF
Disposable Filter Thickness Dimension A Disposable Filter Thickness Dimension B

1 2 7/16 1 3 15/16
2 3 7/16 2 4 15/16

REGISTERS
GRILLES &
Model: RHEF-1 ( Filter Return Grille) Face View

( Surface Mount ) Face View Removable Face
Listed Size + 2 3
8
Filter Back Accepts
Model: RHEF-1 ( Filter Return Grille) Disposable Filter
1
LIsted Size - 8 Face View
( Surface Mount ) Face View Removable Face
A
Listed Size + 2 3
8
Filter Back Accepts
5 1 Duct Size = Listed Size
32 14 Disposable Filter
1
FILTER GRILLES
LIsted Size - 8
Extruded Aluminum 45
Horizontal Deflecting Vanes Mounting Holes Mounting Holes
A
Model: RHEF-1 ( Filter Return .666Grille)
Face View Face View
5 1
Model: 32
RHEF-6 ( Filter
14 Return Grille)
( Surface Mount ) Face View Disposable
Disposable Filter Dimension
Removable Face
( Lay in T-Bar ) Extruded Aluminum 45 Rotating Fastener Filter Thickness A
Rotating Fastener Thickness
Rotating
1" Fastener Dimension A
2-7/16
Horizontal Deflecting Vanes Mounting Holes Mounting Holes
Listed
T-Bar Size +-213
Module 48 Filter Back Accepts 12" 2 7/16
3-7/16
Duct Size = Listed Size Filter Back Accepts
.666 Disposable
Disposable Filter
Filter
LIsted Size -18 1 Face View 2 3 7/16
Model: RHEF-6 ( Filter Return
Listed Grille)
Size -
8
Disposable
Disposable Dimension
Dimension
( Lay in T-Bar ) H Rotating Fastener Filter
Filter Thickness
Thickness A
B
1"
1" 2-7/16
3-15/16
1 A A
T-Bar Module - 4
Filter Back Accepts Disposable2"
2" Filter 3-7/16
4-15/16
55 141
32
32
15 Disposable Filter Thickness Dimension B
16
Listed Size - 1 Extruded
Extruded Aluminum
Aluminum 45 45 Disposable Dimension
8 W
Horizontal
Horizontal Deflecting
Deflecting VanesVanes H
Mounting Holes 1
FilterMounting Holes B3 15/16
Thickness
.666 A 1" 21 3-15/16
2 8
4 15/16
RHF
.666
Face View 2" 4-15/16
Height
Model: 32
5RHEF-6 ( Filter
15 Return Grille) Disposable Dimension
16
Lay-In T-Bar
( LayModules
in T-Barfor RHEF-6 Aluminum 45
)Extruded Rotating Fastener Filter Thickness A
W 1"
12 x 12 24 xVanes
24 2-7/16
Module Size: 124 x 12
Horizontal Deflecting 48 x 24
T-Bar Module - 4 TR (A)/TR Deep (B)
Listed Size: 10 x 10
.666 22 x 10 22 Back
Filter x 22 Accepts 46 x 22 2" 21 3-7/16
Transition 8Square/
Overall Dim. (W x H) 11 3/4 x 11 3/4 23 3/4 x 11 3/4 Disposable
23 Filter47 3/4 x 23 3/4
3/4 x 23 3/4 Rectangular To Round
Height
Listed Size - 1 Disposable Dimension
8
Lay-In T-Bar Modules for RHEF-6 H T-Bar Module = Grid Size Filter Thickness B
ModuleOptions:
Damper Size: 12 x 12 24 x 12 A 24 x 24 48 x 24 Overall Grille Size =
1" 3-15/16
TR (A)/TR Deep (B)
Listed Size: 10 Size
Duct x 10= Listed Size 22 x 10 22 x 22 46 x 22 T- Bar Module - 41 2" 4-15/16
5 Lay-in T-Bar Modules for RHEF - 6 Transition Square/
Overall Dim.
32 (W x H) 11 16
15
3/4 Listed
x 11 Size
3/4 - 123 3/4 x 11 3/4 Options:
23 3/4 x 23 3/4 47 3/4 x 23 3/4 Duct Size = Listed Size Rectangular To Round
8 Options:
Module Size 12 x 12 Extruded
24Aluminum
x 12 45 24 x 24 48 x 24
Listed
W Size - 8
1
HorizontalOpposed
DeflectingBlade
VanesDamper T-Bar Module = Grid Size
Damper
Listed Size Options: 10 x 10 22 Damper
x 10 1
Operator 22 x 22 46 x 22
.666 2
Overall Grille Size = 8
B B Damper Operator
Duct Size = Listed Size (Screwdriver Slot) T- Bar Module - 41
Overall Dim. (W x H) 11 3/4 x 11 3/4 23 3/4Options:
x 11 3/4 23 3/4 x 23 3/4 47Duct
3/4Size
x 23 3/4 (ScrewdriverHeight
Slot)
1 = Listed Size
Listed Size - 8
Lay-In T-Bar Modules for RHEF-6 Options:
15 1
16 Listed Size - 8
Module Size: 12 x 12 24 x 12 Opposed24 xBlade
24 Damper 48 x 24 Opposed
TR (A)/TR Blade
Deep (B) Damper
Listed Size: 10 x 10 22 x 10 Damper 22Operator
x 22 46 x 22
B B Transition Square/
Damper Operator
Overall Dim. (W x H) 11 3/4 x 11 3/4 23 3/4 x 23Slot)
23 3/4 x 11 3/4 (Screwdriver 3/4 47 3/4 x 23 3/4 Rectangular ToSlot)
Round
(Screwdriver
Overall Face = Listed Size + 2 3
8 15T-Bar Module = Grid Size
16
Damper Options: Overall Grille Size =
Duct Size = Listed Size T- Bar Module - 41
1
Listed Size - 8 Options: Duct Size = Listed Size
Options:
1
Listed Size - 8
8 Opposed Blade Damper Opposed Blade Damper
B Damper Operator B Damper Operator
15
16

8
REGISTERS
GRILLES &
Model: SRHF-1 ( Filter Return Grille - Surface Mount )
Listed Size + 2 41
Mounting Holes Mounting Holes
Duct Size = Listed Size Filter Back Accepts
Disposable Filters
Listed Size - 1
8
Model:( SRHF-1
Model: SRHF-1 ( Filter
Filter Return Return
Grille Grille -Mount
- Surface Surface
) Mount )
A Listed Size Listed
+2 4 1 Size + 2 1
4 Mounting Holes
Mounting Holes Mounting Holes
Mounting Holes
Duct Size
Duct Size = Listed Size= Listed SizeFilter BackFilter
AcceptsBack Accepts
5 1 1 1 DisposableDisposable
Filters Filters
32 Listed 1Size
4 Listed
- Size -
8
8
Deflection Vanes
(Horizontal)
A Face view Face View
FILTER GRILLES
A
.666 (SRHF-1) Removable Face
5
5 1 1 1Return Grille - Lay in T-Bar )
32 1 4 ( Filter
Model: SRHF-6 (SRHF-1)
32Model: SRHF-1 ( Filter4Return Grille - Surface Mount )
Deflection1 Deflection
Vanes Vanes Rotating Fastener
Listed
T-BarSize + 2 4 (Horizontal)
Module
(Horizontal) Mounting Holes Mounting Holes
Duct
Duct Size
Size == Listed
Listed Size
Size Filter Back Accepts Face viewFace view Face ViewFace ViewDimension
Disposable
.666 .666Listed
Listed Size
1
Size -- 81
Disposable Filters (SRHF-1) (SRHF-1) Disposable Removable
Filter
Removable Thickness
Face
Filter FaceA
8 Filter Back Accepts (SRHF-1) 1"(SRHF-1) 2-7/16
Model:( SRHF-6
Model: SRHF-6 ( Filter
Filter Return Return
Grille Grille
- Lay - Lay) in T-Bar )
in T-Bar Disposable Filters
Thickness Dimension A
A Rotating Fastener
Rotating Fastener 2" 3-7/16
A T-Bar Module 1 2 7/16
T-Bar Module
1 Size
Duct Size =1Duct
Listed = Listed Size
Size DisposableDisposableDimensionDimension
5 4
1 2Filter Thickness
Filter Thickness A 3 7/16A
32 Listed 1Size -1
4 Listed Size - 1
8 8 Horizontal
Filter BackFilter
AcceptsBack Accepts 1" Disposable
1"2-7/16 Dimension
2-7/16
Deflection Vanes
Vanes Filter Thickness B
A
DisposableDisposable
Deflection Filters Filters Face view
A (Horizontal) 2" 2"
1"3-7/16 3-7/16
Face view
(SRHF-6) Face View 3-15/16
1 (SRHF-1) Disposable Filter Removable
2" Face
4-15/16
1
14 1.666
.666
4
Lay-In Grille
T-Bar Modules forT-Bar
SRHF-6 and SRHFD-6 Models
Thickness (SRHF-1) Dimension B
Model: SRHF-6 ( Filter Return - Lay in
Horizontal )
12 x 12 24 x 12 Horizontal 36 x 12 48 x 12 24 x 24 36 x 24 48 x 24 36 x 36 48 x 48 DisposableDisposable DimensionDimension
Deflection Deflection
Vanes Listed Vanes Rotating Fastener 1Filter Thickness
Filter Thickness B 3 15/16 B
T-Bar Module
Sizes Face viewFace view
1" 1"3-15/16 3-15/16
RHF
10 x 10 22 x 10 34 x 10 46 x 10 22 x 22 34 x 22 46 x 22 34 x 34 (SRHF-6)
46 x 46 (SRHF-6)
Duct Size = Listed Size 2Disposable 4 15/16
Dimension
Option: SRHF-1.666 ( Register
.666 - Surface1Mount ) 2"4-15/16 4-15/16
2" Filter Thickness A
Listed Size -
With
Lay-InOpposed
T-Bar 8 Blade
Modules for Damper
SRHF-6
Lay-In T-Bar Modules for SRHF-6 and SRHFD-6 Models Filter
andBack Accepts
SRHFD-6 Models Option: SRHF-6 ( Register - Lay in T-Bar )1" 2-7/16
12 x 12 A 2412x x1212 3624 xx 12
Listed 12 Size 36+xx212
48 1
12 48 xx 24
24 12 36 24 xxDisposable
24 48
24 Filters48 x 24
36 xx 24
24 36 x 36 36 xx 48
48 36 48 x 48 With Opposed Blade Damper
4 2" 3-7/16
Listed SizesListed Sizes
10 x 10 22 10 Duct
10 xx 10 22 x1Size
34 10 = Listed
x 10 46 Size 22
34 xx 10
10 46 xx 22
10 34 22 xx 2222 46 34 xx 22
22 34 46 xx 34
22 46 34 xx 46
34 46 x 46
14 Options:
Lay-in T-bar Modules for SRHF - 6 and SRHFD - 6 ModelsT-Bar Module
Option:( SRHF-1
Option: SRHF-1 Register( -Register
SurfaceListed-Mount - 1) Mount )
Surface
Size
8 Horizontal SRHF-6 Duct Size
Option:( SRHF-6 = Listed
( Register Size
- Lay) in Disposable
T-Bar )
12 x 12 With Opposed 24 xWith 12 Opposed
Blade Damper
36 Blade
x 12 Damper
Opposed
Deflection Vanes
48 x 12Blade Damper 24x Option:
24 36 x 24Register -48 Lay in T-Bar
x 24 1 Opposed 36 Options:
x 36
Filter Thickness 48Dimension
x 48
B
+ 2 41 Size + 2 4
Listed Size Listed
1 With
Face view
Listed With
Opposed
Size -8 Blade Damper Blade Damper
1"
Opposed Blade3-15/16
Damper
B Damper Operator Listed Size (SRHF-6)
Duct Size =Duct
Listed Size = Listed Size
Size 2"
.666 Options: (Screwdriver Slot)
Options: 4-15/16
T-Bar Module
10 x 10 Listed Size x- 110
22 Listed Size
Lay-In - 1 Modules
T-Bar 8
34 x 10 for SRHF-646and x 10
SRHFD-6 Models 22 x 22 B 34 xT-Bar
22 Module 46 x 22 34 x 34 46 x 46
Damper Operator
5 8 Filter 24
Back Duct Size =Duct Size
Listed = Listed SizeOptions: Options:
Size
32 12 x 12 24 x 12 36 x 12 48 x 12
Opposed x 24Accepts
Opposed
Blade 36 x Undersized
Blade
Damper 24 Damper
48 x 24 36 x 36 48 x 48 (Screwdriver Slot)
1" Thick Throw-away Filter Sizes 1 1
1 Listed Sizes 1 Listed
Listed Size
14
-8 Size - 8
B B 10 x 10 1 22 4 x 10 34 x 10 46 x 10 Operator
Damper 22 x 22 Operator
Damper 34 x 22 46 x 22 34 x 34 46 x 46 Opposed BladeOpposed Blade Damper
Damper
Deflection
Option: SRHF-1 ( Register - Surface MountVanes
) (Screwdriver Slot) Deflection Vanes
(Screwdriver Slot)
(Horizontal)
With Opposed Blade Damper B B Option: SRHF-6 ( Register - Lay in T-Bar ) (Horizontal)
Damper Operator
1 Damper Operator
5 5 .666 1 BackFilter Back Accepts Undersized 28 With Opposed Blade Damper Slot)
32 32 Listed Size + 2Filter
4
Accepts Undersized .666 (Screwdriver
(Screwdriver Slot)
1 1" Thick Throw-away
1" Thick Throw-away Filter SizesFilter Sizes 1 1
1
14 14 Height
14 14
Deflection Vanes Options: T-Bar Module
Deflection Vanes Deflection Deflection Vanes
Listed Size - 1 Vanes
8
(Horizontal)(Horizontal) Duct Size = Listed Size (Horizontal) (Horizontal)
Options:
.666 Opposed Blade Damper 1 2 1 1
.666 28 8 Listed
.666 Size - 8
.666
B Damper Operator Height Opposed Blade Damper
Height
(Screwdriver Slot)
B Damper Operator
5 Filter Back Accepts Undersized
1 1" Thick Throw-away Filter Sizes 1
14 14
Deflection Vanes Deflection Vanes
(Horizontal) (Horizontal)
.666 1
28
.666
Height

REGISTERS
GRILLES &
SERIES RHF SPECIFICATIONS

RETURN FILTER GRILLE Performance Specification
FIXED HORIZONTAL BLADE The manufacturer shall provide published performance
ALUMINUM/EXTRUDED data. Data shall be tested in accordance to ANSI/
ALUMINUM/STEEL ASHRAE Standard 70-2006.
Models RHF/RHEF/SRHF Paint Specification

FILTER GRILLES
Air inlets shall be model RHF/RHEF/SRHF manufactured Process shall be anodic electro-deposition using an
by METALAIRE. Units shall be filter return or exhaust anodic acrylic paint. Units shall undergo pre-treatment
grilles of aluminum (RHF), extruded aluminum (RHEF) including a pressurized spray stage using an alkaline
or steel (SRHF) construction and have a single set of cleaner and a de-ionized water rinse.
fixed horizontal blades. The units shall include a hinged
face and integral frame designed to accept a 1" thick
(optional 2" thick) filter. The grille face shall be secured in
place with thumb latches. The units shall be the size and
border shall be 1 1/4" wide with aerodynamically shaped
deflector blades on 2/3" center set at 40.
RHF

REGISTERS
GRILLES &
RHF MODEL NUMBER SPECIFICATION
RETURN FILTER GRILLE FIXED HORIZONTAL BLADES SURFACE MOUNT
Model Neck
RHF-1 Aluminum 6 8 10 12 14 16 18 20 22 24 26
RHEF-1 Extruded Aluminum 4 X X X X X X X X X X X
SRHF-1 Steel 5 X X X X X X X X X X X
FILTER GRILLES
RHF

Available Options
NSH No Screw Holes
FF 2" Filter Frame

REGISTERS
GRILLES &

RETURN FILTER GRILLE FIXED HORIZONTAL BLADES SURFACE MOUNT
Model Neck
RHF-1 Aluminum 28 30 32 34 36 38 40 42 44 46 48
RHEF-1 Extruded Aluminum 4 X X X X X X X X X X X
SRHF-1 Steel 5 X X X X X X X X X X X
FILTER GRILLES
RHF

Available Options
NSH No Screw Holes
FF 2" Filter Frame
REGISTERS
GRILLES &
SERIES RHF MODEL NUMBER SPECIFICATION
FILTER RETURN GRILLE - FIXED HORIZONTAL BLADES - LAY-IN
Model Neck
RHF-6 Aluminum 6 8 10 12 14 16 18 20 22 24 Module
RHEF-6 Extruded Aluminum 4 X X
SRHF-6 Steel 6 X X
12 x 12
FILTER GRILLES
8 X X
10 X
4 X X X X X X X X
6 X X X X X X X X
24 x 12
8 X X X X X X X X
10 X
4 X X X X X X X X
6 X X X X X X X X
8 X X X X X X X X
10 X X X X X X X X
12 X X X X X X X X
RHF
24 x 24
14 X X X X X X X X
16 X X X X X X X X
18 X X X X X X X X
20 X X X X X X X X
22 X
12 X X X X X X X X X X 48 x 24


REGISTERS
GRILLES &

FILTER RETURN GRILLE FIXED HORIZONTAL BLADES LAY-IN
Model Neck
RHF-6 Aluminum 26 28 30 32 34 36 38 40 42 44 46 Module
RHEF-6 Extruded Aluminum 4 X X X X X X X X X X
SRHF-6 Steel 6 X X X X X X X X X X
FILTER GRILLES
48 x 24
22 X

RHF

REGISTERS
GRILLES &
SERIES RHF PERFORMANCE DATA
MODEL RHF, RHEF, SRHF
Size
Velocity 240 200
100
Ps .007 .005
FILTER GRILLES
Velocity 360 300 270 225 200
150
Ps .016 .011 .009 .006 .005
Velocity 480 400 360 300 267 200
200
Ps .029 .020 .016 .011 .009 .005
Velocity 600 500 450 375 333 250
250
Ps .046 .032 .026 .018 .014 .008
Velocity 720 600 540 450 400 300 225 200
300
Ps .066 .046 .037 .026 .020 .011 .006 .005
Velocity 840 700 630 525 467 350 263 233 210
350
Ps .089 .062 .050 .035 .028 .016 .009 .007 .006
Velocity 800 720 600 533 400 300 267 240 200
RHF
400
Ps .081 .066 .046 .036 .020 .011 .009 .007 .005
Velocity 900 810 675 600 450 338 300 270 225 200
450
Ps .103 .083 .058 .046 .026 .014 .011 .009 .006 .005
Velocity 750 667 500 375 333 300 250 222 200
500
Ps .071 .056 .032 .018 .014 .011 .008 .006 .005
Velocity 825 733 550 413 367 330 275 244 220
550
Ps .086 .068 .038 .022 .017 .014 .010 .008 .006
Velocity 900 800 600 450 400 360 300 267 240 216 200
600
Ps .103 .081 .046 .026 .020 .016 .011 .009 .007 .006 .005
Velocity 867 650 488 433 390 325 289 260 234 217
650
Ps .095 .054 .030 .024 .019 .013 .011 .009 .007 .006
Velocity 700 525 467 420 350 311 280 252 233
700
Ps .062 .035 .028 .022 .016 .012 .010 .008 .007
Velocity 750 563 500 450 375 333 300 270 250
750
Ps .071 .040 .032 .026 .018 .014 .011 .009 .008
NC 40 35 30 25
PERFORMANCE NOTES FOR SERIES RHF, RHEF, SRHF

DEFINITION OF UNITS

REGISTERS
GRILLES &
MODEL CC5F
The CC5F series of cubed core filter grilles is designed to provide low
pressure drop and sound levels. The units are aluminum construction
and have a 1/2" x 1/2" x 1/2" grid core.

FILTER GRILLES

CC5F
Disposable Filter Thickness Dimension A

1 2 7/16
2 3 7/16
Disposable Filter Thickness Dimension B

1 3 15/16
2 4 15/16
REGISTERS
GRILLES &
SERIES CC5F SPECIFICATIONS
RETURN FILTER GRILLE Performance Specification
CUBED CORE ALUMINUM The manufacturer shall provide published performance
MODEL CC5F data. Data shall be tested in accordance to ANSI/
Air inlets shall be model CC5F manufactured by ASHRAE Standard 70-2006.
METALAIRE. Units shall be filter return or exhaust grilles
of aluminum construction with a 1/2" x 1/2" x 1/2" cubed Paint Specification
FILTER GRILLES
core. The units shall include a hinged face and integral Process shall be anodic electro-deposition using an
frame designed to accept a 1" thick (optional 2" thick) anodic acrylic paint. Units shall undergo pre-treatment
filter. The grille face shall be secured in place with thumb including a pressurized spray stage using an alkaline
latches. The units shall be the size and quantity as cleaner and a de-ionized water rinse.
outlined in the plans and specifications. The border shall
be 1 1/4" wide. The units shall be designed for surface
mounting with countersunk screw holes on the face of the
device or T-bar Lay-in applications.
CC5F

REGISTERS
GRILLES &
CC5F MODEL NUMBER SPECIFICATION

CUBED CORE FILTER RETURN ALUMINUM 1/2" X 1/2" X 1/2"
Model Neck
CC5F-1 Surface Mount 6 8 10 12 14 16 18 20 22 24 26
FILTER GRILLES
CC5F

Optional PF Plaster Frame
02 Satin Silver LIPF Lay-in Plaster Frame
Available Options
NSH No Screw Holes
REGISTERS
GRILLES &
Model Neck
CC5F-1 Surface Mount 28 30 32 34 36 38 40 42 44 46 48
FILTER GRILLES
CC5F

Available Options
NSH No Screw Holes

REGISTERS
GRILLES &

Model Neck
CC5F-6 T-bar Lay-in 6 8 10 12 14 16 18 20 22 24 Module
4 X X
6 X X
12 x 12
FILTER GRILLES
8 X X
10 X
4 X X X X X X X X
6 X X X X X X X X
24 x 12
8 X X X X X X X X
10 X
4 X X X X X X X X
6 X X X X X X X X
8 X X X X X X X X
10 X X X X X X X X
12 X X X X X X X X
CC5F
24 x 24
14 X X X X X X X X
16 X X X X X X X X
18 X X X X X X X X
20 X X X X X X X X
22 X
12 X X X X X X X X X X 48 x 24

Optional TBPF T-bar Plaster Frame
02 Satin Silver IS Insect Screen
03 Black TR Square to Round Transition
24 Mill TR Deep Deep Square to Round Transition
28 Custom Color
REGISTERS
GRILLES &
Model Neck
CC5F-6 T-bar Lay-in 6 8 10 12 14 16 18 20 22 24 Module
FILTER GRILLES
24 X X X X X X X X X X 48 x 48
CC5F

28 Custom Color

REGISTERS
GRILLES &

Model Neck
CC5F-6 T-bar Lay-in 26 28 30 32 34 36 38 40 42 44 46 Module
FILTER GRILLES
48 x 24
22 X
CC5F
48 x 48
46 X

28 Custom Color
REGISTERS
GRILLES &
SERIES CC5F PERFORMANCE DATA
MODEL CC5F
Size
CFM 6x6 8x8 10 x 10 12 x 12 14 x 14 16 x 14 16 x 16 18 x 16 18 x 18 20 x 18 20 x 20 22 x 20 22 x 22 24 x 22
Velocity 400 225
100
Ps .064 .055
FILTER GRILLES
150
Ps .082 .060 .054
Velocity 800 450 288 200
200
Ps .107 .068 .057 .054
250
Ps .078 .062 .056
Velocity 675 432 300 220
300
Ps .091 .067 .058 .054
Velocity 787 504 350 257 225
350
Ps .105 .073 .061 .056 .055
Velocity 900 576 400 294 257 225 200
CC5F
400
Ps .122 .080 .064 .058 .056 .055 .054
Velocity 648 450 331 289 253 225 200
450
Ps .087 .068 .060 .057 .056 .055 .054
Velocity 720 500 367 321 281 250 222 200
500
Ps .096 .072 .062 .059 .057 .056 .054 .054
Velocity 792 550 404 354 309 275 244 220
550
Ps .106 .077 .065 .061 .059 .057 .055 .054
Velocity 864 600 441 386 338 300 267 240 216
600
Ps .116 .082 .067 .063 .060 .058 .056 .055 .054
Velocity 650 478 418 366 325 289 260 234 213
650
Ps .088 .070 .066 .062 .059 .057 .056 .055 .054
Velocity 700 514 450 394 350 311 280 252 229 208
700
Ps .094 .074 .068 .064 .061 .059 .057 .056 .055 .054
Velocity 750 551 482 422 375 333 300 270 245 223 205
750
Ps .100 .077 .071 .066 .063 .060 .058 .056 .055 .054 .054
NC 25-30 20-25 <20

REGISTERS
GRILLES &
SERIES CC5F PERFORMANCE DATA

MODEL CC5F
Size
CFM 24 x 24 26 x 26 28 x 28 30 x 30 32 x 32 48 x 24 34 x 34 36 x 36 38 x 38 40 x 40 42 x 42 44 x 44 46 x 46 48 x 48 NC
Velocity 200
800
Ps .053
FILTER GRILLES
Velocity 250 213

1000
Ps .055 .054
1200
Ps .058 .056 .054
Velocity 400 341 294 256 225 200
1600
Ps .064 .060 .057 .056 .054 .053
Velocity 500 426 367 320 281 250 249 222
2000
Ps .071 .065 .061 .059 .057 .055 .055 .054
Velocity 625 533 459 400 352 313 311 278 249 225 204
2500
Ps .083 .074 .068 .064 .060 .058 .058 .057 .055 .054 .054
Velocity 750 639 551 480 422 375 374 333 299 270 245 223 204
CC5F
3000 <20
Ps .098 .085 .076 .070 .065 .062 .062 .059 .058 .056 .055 .054 .054
Velocity 875 746 643 560 492 438 436 389 349 315 286 260 238 219
3500
Ps .115 .097 .085 .077 .071 .066 .066 .063 .060 .058 .057 .056 .055 .054
Velocity 852 735 640 563 500 498 444 399 360 327 298 272 250
4000
Ps .112 .096 .085 .077 .071 .071 .067 .063 .061 .059 .058 .056 .055
Velocity 827 720 633 563 561 500 449 405 367 335 306 281
4500
Ps .108 .094 .084 .077 .077 .071 .067 .064 .061 .060 .058 .057
Velocity 800 703 625 623 556 499 450 408 372 340 313
5000
Ps .104 .092 .083 .083 .076 .071 .067 .064 .062 .060 .058
Velocity 800 750 747 667 598 540 490 446 408 375
6000
Ps .104 .098 .097 .088 .080 .075 .070 .067 .064 .062
Velocity 875 872 778 698 630 571 521 476 438
7000
Ps .115 .114 .101 .091 .084 .078 .073 .069 .066
Velocity 889 798 720 653 595 544 500
8000
Ps .117 .104 .094 .086 .080 .075 .071
NC 30-35 25-30
PERFORMANCE NOTES FOR SERIES CC5F

DEFINITION OF UNITS
REGISTERS
GRILLES &
MODEL RPF
The RPF series of perforated filter grilles is designed to blend into
the ceiling system and provide a clean, uncluttered architectural
appearance. The RPF series is available in aluminum (RPF) and steel
(SRPF) construction.
FILTER GRILLES
RPF
Lay-in T-Bar Modules for RPF - 6
24 x 24 48 x 24
Listed Sizes
22 x 22 46 x 22
Overall Dimensions W x H
23 3/4 x 23 3/4 47 3/4 x 23 3/4
Disposable Filter Thickness Dimension A Disposable Filter Thickness Dimension B

1 2 7/16 1 3 15/16
2 3 7/16 2 4 15/16

REGISTERS
GRILLES &
SERIES RPF SPECIFICATIONS

RETURN FILTER GRILLE PERFORATED Performance Specification
ALUMINUM/STEEL MODELS RPF/SRPF The manufacturer shall provide published performance
Air inlets shall be model RPF/SRPF manufactured by data. Data shall be tested in accordance to ANSI/
METALAIRE. Units shall be perforated face return filter ASHRAE Standard 70-2006.
or exhaust grilles of aluminum (RPF) or steel (SPRF)
construction. The units shall include a hinged face Paint Specification
FILTER GRILLES
and integral frame designed to accept a 1" thick (optional Process shall be anodic electro-deposition using an
2" thick) filter. The grille face shall be secured in place anodic acrylic paint. Units shall undergo pre-treatment
with thumb latches. The units shall be the size and including a pressurized spray stage using an alkaline
quantity as outlined in the plans and specifications. cleaner and a de-ionized water rinse.
The border shall be 1 1/4" wide with a perforated face
of 3/16" diameter holes on 1/4" center for a 51% free
area. Units shall be designed for surface mounting with
countersunk screw holes on the face of the device or T-bar
Lay-in applications.
RPF
REGISTERS
GRILLES &
RPF MODEL NUMBER SPECIFICATION
PERFORATED FILTER GRILLE ALUMINUM/STEEL
Model Neck
RPF-1 Aluminum Surface Mount 6 8 10 12 14 16 18 20 22 24 26
SRPF-1 Steel Surface Mount 4 X X X X X X X X X X X
FILTER GRILLES
RPF

Available Options
NSH No Screw Holes

REGISTERS
GRILLES &

Model Neck
RPF-1 Aluminum Surface Mount 28 30 32 34 36 38 40 42 44 46 48
SRPF-1 Steel Surface Mount 4 X X X X X X X X X X X
FILTER GRILLES
RPF

Available Options
NSH No Screw Holes
REGISTERS
GRILLES &
Model Neck
RPF-6 Aluminum - Lay-in 6 8 10 12 14 16 18 20 22 24 Module
SRPF-6 Steel - Lay-in 4 X X
6 X X
12 x 12
X X
FILTER GRILLES
8
10 X
4 X X X X X X X X
6 X X X X X X X X
24 x 12
8 X X X X X X X X
10 X
4 X X X X X X X X
6 X X X X X X X X
8 X X X X X X X X
10 X X X X X X X X
12 X X X X X X X X
RPF
24 x 24
14 X X X X X X X X
16 X X X X X X X X
18 X X X X X X X X
20 X X X X X X X X
22 X
12 X X X X X X X X X X 48 x 24

24 Mill (Aluminum Construction Only) TR Deep Deep Square to Round Transition
28 Custom Color

REGISTERS
GRILLES &

Model Neck
RPF-6 Aluminum - Lay-in 26 28 30 32 34 36 38 40 42 44 46 Module
SRPF-6 Steel - Lay-in 4 X X X X X X X X X X
FILTER GRILLES
48 x 24
22 X

RPF

24 Mill (Aluminum Construction Only) TR Deep Deep Square to Round Transition
28 Custom Color
REGISTERS
GRILLES &
SERIES RPF PERFORMANCE DATA
MODEL RPF
Size
CFM 8x8 10 x 10 12 x 12 14 x 14 16 x 16 18 x 18 20 x 20 22 x 22 24 x 24 30 x 24 36 x 24 40 x 24 44 x 24 48 x 24 NC
Nk Vel 450 288 200
200
Ps 0.003 0.001 0.001
FILTER GRILLES
Nk Vel 900 576 400 294 225
400
Ps 0.012 0.005 0.002 0.001 0.001

Nk Vel 864 600 441 338 267 216
600
Ps 0.011 0.005 0.003 0.002 0.001 0.001

Nk Vel 800 588 450 356 298 238 200
800
Ps 0.01 0.005 0.003 0.002 0.001 0.001 0.001

Nk Vel 735 563 444 360 298 250 200
1000
Ps 0.008 0.005 0.003 0.002 0.001 0.001 0.001
25-30
Nk Vel 882 675 533 432 357 300 240 200
1200
Ps 0.012 0.007 0.004 0.003 0.002 0.001 0.001 0.001

Nk Vel 787 622 504 417 350 280 233 210
RPF
1400
Ps 0.009 0.006 0.004 0.003 0.002 0.001 0.001 0.001

Nk Vel 900 711 576 476 400 320 267 240 218 200
1600
Ps 0.012 0.008 0.005 0.003 0.002 0.002 0.001 0.001 0.001 0.001
Nk Vel 800 648 536 450 360 300 270 245 225
1800
Ps 0.01 0.006 0.004 0.003 0.002 0.001 0.001 0.001 0.001

Nk Vel 889 720 595 500 400 333 300 273 250
2000
Ps 0.012 0.008 0.005 0.004 0.002 0.002 0.001 0.001 0.001

Nk Vel 864 714 600 480 400 360 327 300
2400
Ps 0.011 0.008 0.005 0.004 0.002 0.002 0.002 0.001

Nk Vel 833 700 560 467 420 382 350
2800
Ps 0.011 0.007 0.005 0.003 0.003 0.002 0.002

Nk Vel 800 640 533 480 436 400
3200
Ps 0.011 0.006 0.004 0.004 0.003 0.002

Nk Vel 900 720 600 540 491 450
3600
Ps 0.012 0.008 0.005 0.004 0.004 0.003

NC 35-40 30-35
PERFORMANCE NOTES FOR SERIES RPF

DEFINITION OF UNITS

REGISTERS
GRILLES &
HEAVY DUTY GRILLES

MODEL HDRH
HEAVY DUTY GRILLES
MODEL 4500
METALAIRE heavy duty grilles are designed to withstand moderate abuse.

These grilles are available in steel and aluminum construction.
Aluminum Heavy Duty Return

The HDRH series of heavy duty grilles is available in aluminum construction and
is designed to withstand moderate physical abuse. Applications for the HDRH
include common areas in schools, hospitals and other high traffic areas.
HDRH Aluminum heavy duty return PAGE 153
Steel Heavy Duty Gym Grille

The 4500 series of heavy duty gym grille is available in steel construction with
0 or 38 blade deflection. The border and deflection blades are heavy gauge
steel and are built to withstand moderate physical abuse.
4500 Steel heavy duty gym grille - 0 deflection
PAGE 158
4538 Steel heavy duty gym grille - 38 deflection
REGISTERS
GRILLES &
MODEL HDRH
The HDRH series of heavy duty grilles is an excellent choice for
projects that require a grille or register to withstand moderate
physical abuse. Applications for the HDRH include common areas
in schools, hospitals and other high traffic areas. The HDRH is
HEAVY DUTY GRILLES

heavy duty aluminum construction.
Outer frame borders are 1 5/8" wide
Blade spacing is 1 1/3"
Deflection blades are assembled in the outer frame using metal screws for added rigidity
Braced heavily to ensure construction integrity under severe conditions
Model: HDRH-1 (1 1/3 Blade Spacing Louver Grille - Surface Mount )
Duct Size = Listed Size Face View

1
Listed Size - 4
HDRH
Model: HDRH-1 (1 1/3 Blade Spacing Louver Grille - Surface Mount )
1.33 Typ Listed Size
Duct Size = Listed Size Face View 1
+22
1
Listed Size - 4
31 31
8 8
1.33 Typ Listed Size
1
Listed Size + 2 2 1
+22
15 Horizontal
1 8 1
38 Deflecting Vanes 3 8
1
Listed Size + 2 2
Option: HDRHD-1 (1 1/3 Blade Spacing Louver Register -
15
Surface Mount - With Opposed Blade Damper )
Horizontal
8
Deflecting Vanes
Duct Size
Option: HDRHD-1 (1 =1/3
Listed OBD Steel
Size Spacing Louver
Blade Opposed- Blade Damper or
Register
Surface Mount - Listed
With Size
Opposed
- 1 Blade OBDA Aluminum
Damper ) Opposed Blade Damper
8
Damper Operator (Screwdriver
Slot Accessible Through Face )
Duct Size = Listed Size OBD Steel Opposed Blade Damper or
1
Listed Size - 8 OBDA Aluminum Opposed Blade Damper
Damper 7Operator (Screwdriver
48
Slot Accessible Through Face )
1
38
487
15 Horizontal Deflecting Vanes
8 1
38
15 Horizontal Deflecting Vanes

8

REGISTERS
GRILLES &
SERIES HDRH SPECIFICATIONS

RETURN GRILLE HEAVY DUTY Performance Specification
ALUMINUM MODEL HDRH The manufacturer shall provide published performance
Air inlets shall be model HDRH manufactured by data. Data shall be tested in accordance to ANSI/
METALAIRE. Units shall be heavy duty return or exhaust ASHRAE Standard 70-2006.
grilles of aluminum construction. Units shall be designed
HEAVY DUTY GRILLES
to withstand moderate physical abuse. The units shall Paint Specification

be the size and quantity as outlined in the plans and Process shall be anodic electro-deposition using an
specifications. The border shall be 1 5/8" wide with anodic acrylic paint. Units shall undergo pre-treatment
aerodynamically shaped curved blades on 1 1/3" center. including a pressurized spray stage using an alkaline
Deflection blades shall be fixed in place with metal cleaner and a de-ionized water rinse.
screws. Units shall be designed for surface mounting
applications and be provided with countersunk screw
holes on the face of the device.
HDRH
REGISTERS
GRILLES &
HDRH MODEL NUMBER SPECIFICATIONS
HEAVY DUTY RETURN
Model Neck
HDRH-1 Aluminum Surface Mount 6 8 10 12 14 16 18 20 22 24 26
HEAVY DUTY GRILLES

HDRH

03 Black
04 Clear Anodize
24 Mill
28 Custom Color

REGISTERS
GRILLES &
HDRH MODEL NUMBER SPECIFICATIONS

HEAVY DUTY RETURN
Model Neck
HDRH-1 Aluminum Surface Mount 28 30 32 34 36 38 40 42 44 46 48
HEAVY DUTY GRILLES
HDRH

03 Black
04 Clear Anodize
24 Mill
28 Custom Color
REGISTERS
GRILLES &
SERIES HDRH PERFORMANCE DATA
MODEL HDRH
Size
Nk Vel 500 281 222
500
HEAVY DUTY GRILLES

Ps 0.014 0.004 0.003
Nk Vel 900 506 400 324 225
900
Ps 0.045 0.014 0.009 0.006 0.003
Nk Vel 844 667 540 375 300 281
1500
Ps 0.04 0.025 0.016 0.008 0.005 0.004
Nk Vel 889 720 500 400 375 250 222
2000
Ps 0.044 0.029 0.014 0.009 0.008 0.003 0.003
Nk Vel 750 600 563 375 333 286 250 245 214
3000
Ps 0.031 0.02 0.018 0.008 0.006 0.005 0.003 0.003 0.003
Nk Vel 800 750 500 444 381 333 327 286 250
4000
Ps 0.036 0.031 0.014 0.011 0.008 0.006 0.006 0.005 0.003
Nk Vel 625 556 476 417 408 357 313
HDRH
5000
Ps 0.022 0.017 0.013 0.01 0.009 0.007 0.005
NC 35 30 25
PERFORMANCE NOTES FOR SERIES HDRH

DEFINITION OF UNITS
Nk Vel Neck Velocity of air stream in Feet per Minute

REGISTERS
GRILLES &
MODEL 4500
The 4500 series heavy duty return grille is designed for applications
such as gymnasiums, manufacturing facilities, warehouses and public
areas. The border and deflection blades are heavy gauge steel and built
to withstand moderate physical abuse.
HEAVY DUTY GRILLES
All steel construction with 1 1/4" borders
Available with 0 and 38 Fixed Deflection
Supported on Minimum 6" Centers
Optional OBDE Damper

4500
REGISTERS
GRILLES &
RETURN HEAVY DUTY GYM GRILLE Performance Specification
STEEL MODELS 4500/4538 The manufacturer shall provide published performance
Air Inlets shall be model 4500 (0 deflection) or 4538 data. Data shall be tested in accordance to ANSI/
(38 deflection) manufactured by METALAIRE. Units shall ASHRAE Standard 70-2006.
be return or exhaust grilles constructed of 14 gauge
HEAVY DUTY GRILLES

deflector blades and 16 gauge borders. The grilles shall Paint Specification
be designed to withstand moderate physical abuse. The Process shall be anodic electro-deposition using an
units shall be the size and quantity as outlined in the anodic acrylic paint. Units shall undergo pre-treatment
plans and specifications. including a pressurized spray stage using an alkaline
Border shall be 1 1/4" wide with aerodynamically shaped cleaner and a de-ionized water rinse.
deflector blades on 2/3" center. Deflector blades shall
be fixed. Units shall be designed for surface mounting
applications and be provided with countersunk screw
holes on the face of the device.
4500

REGISTERS
GRILLES &
SERIES 4500 MODEL NUMBER SPECIFICATION

HEAVY DUTY GYM GRILLE STEEL SURFACE MOUNT
Model Neck
4500 0 Deflection 6 8 10 12 14 16 18 20 22 24 26
4538 38 Deflection 4 X X X X X X X X X X X
HEAVY DUTY GRILLES
4500

Standard OBDA Aluminum Opposed Blade Damper
01 White L9 Equalizing Grid
Available Options
NSH No Screw Holes
REGISTERS
GRILLES &
SERIES 4500 MODEL NUMBER SPECIFICATION
HEAVY DUTY GYM GRILLE STEEL SURFACE MOUNT
Model Neck
4500 0 Deflection 28 30 32 34 36 38 40 42 44 46 48
4538 38 Deflection 4 X X X X X X X X X X X
HEAVY DUTY GRILLES

4500

Standard OBDA Aluminum Opposed Blade Damper
01 White L9 Equalizing Grid
Available Options
NSH No Screw Holes

REGISTERS
GRILLES &

MODEL 4500
Nominal Duct
Size Velocity 200 300 400 500 600 700 800 900 1000 1200 1400 1600
L W Ps .005 .012 .022 .034 .049 .067 .087 .110 .136 .196 .267 .348
CFM 42 63 84 105 126 147 168 189 210 252 294 336
6 6
HEAVY DUTY GRILLES
NC - - - - - 20 22 27 28 32 35 38
CFM 57 86 115 143 172 201 229 258 286 344 401 458
8 6
NC - - - - - 21 23 28 29 33 36 39
CFM 78 117 156 195 234 273 313 352 391 469 547 625
8 8
NC - - - - - 26 25 30 31 35 38 41
CFM 88 132 176 220 264 307 351 395 439 527 615 703
12 6
NC - - - - - 23 25 30 31 35 38 43
CFM 120 180 240 299 359 419 479 539 599 719 839 958
12 8
NC - - - - 21 25 27 32 33 37 40 43
CFM 152 228 303 379 455 531 607 683 759 910 1062 1214
12 10
NC - - - - 22 26 28 33 34 38 41 44
CFM 184 276 367 459 551 643 735 827 918 1102 1286 1469
12 12
NC - - - - 22 26 28 33 34 38 41 44
CFM 216 323 431 539 647 755 863 970 1078 1294 1509 1725
4500
14 12
NC - - - 20 23 27 29 34 35 39 42 45
CFM 253 380 506 633 759 886 1013 1139 1139 1524 1778 2032
14 14
NC - - - 21 24 28 30 35 36 40 43 46
CFM 425 638 851 1063 1276 1489 1701 1914 2127 2552 2977 3403
18 18
NC - - 21 23 26 30 32 37 38 42 45 48
CFM 375 563 751 938 1126 1314 1501 1689 1877 2252 2627 3003
24 12
NC - - 20 22 25 29 31 36 37 41 44 47
CFM 571 857 1142 1428 1714 1999 2285 2570 2856 3427 3998 4569
24 18
NC - - 22 24 27 31 33 38 39 43 46 49
CFM 767 1151 1534 1918 2301 2685 3068 3452 3835 4602 5369 6136
24 24
NC - 21 24 26 29 33 35 40 41 45 48 51
CFM 799 1198 1598 1997 2397 2797 3196 3595 3995 4794 5593 6392
30 20
NC - 21 24 26 29 33 35 40 41 45 48 51
CFM 963 1444 1926 2407 2889 3370 3851 4333 4814 5777 6740 7703
30 24
NC - 22 25 27 30 34 36 41 42 46 49 52
CFM 1060 1590 2120 2650 3180 3710 4240 4770 5300 6360 7420 8481
36 22
NC - 22 25 27 30 34 36 41 42 46 49 52
CFM 1159 1738 2317 2897 3476 4055 4635 5214 5793 6952 8111 9269
36 24
NC - 22 25 27 30 34 36 41 42 46 49 52
CFM 1239 1859 2478 3098 3718 4337 4957 5577 6196 7435 8675 9914
42 22
NC 20 23 26 28 31 35 37 42 43 47 50 53
CFM 1470 2205 2940 3674 4409 5144 5879 6614 7349 8819 10289 11758
42 26
NC 20 23 26 28 31 35 37 42 43 47 50 55
CFM 1550 2326 3101 3876 4651 5426 6201 6977 7752 9302 10852 12403
48 24
NC 21 24 27 29 32 36 38 43 44 48 51 54
CFM 1946 2919 3892 4865 5839 6812 7785 8758 9731 11677 13623 15569
48 30
NC 22 25 28 30 33 37 39 44 45 49 52 55
CFM 2342 3513 4684 5855 7026 8197 9368 10539 11710 14052 16394 18736
48 36
NC 22 25 28 30 33 37 39 44 45 49 52 55
CFM 2606 3909 5212 6515 7818 9121 10424 11727 13030 15635 18241 20847
48 40
NC 23 26 29 31 24 28 40 45 46 50 53 56
CFM 3134 4701 6267 7837 9401 10968 12535 14102 15668 18802 21936 25069
48 48
NC 24 27 30 32 35 39 41 46 47 51 54 57
REGISTERS
GRILLES &
MODEL 4538
Nominal Duct
Size Velocity 200 300 400 500 600 700 800 900 1000 1200 1400 1600
L W Ps .005 .012 .022 .034 .049 .067 .087 .110 .136 .196 .267 .348
CFM 42 63 84 105 126 147 168 189 210 252 294 336
6 6
HEAVY DUTY GRILLES

NC - - - - - 23 27 32 37 48 58 70
CFM 57 86 115 143 172 201 229 258 286 344 401 458
8 6
NC - - - - - 24 28 33 38 49 59 71
CFM 78 117 156 195 234 273 313 352 391 469 547 625
8 8
NC - - - - 21 26 30 35 40 51 61 73
CFM 88 132 176 220 264 307 351 395 439 527 615 703
12 6
NC - - - - 21 26 30 35 40 51 61 73
CFM 120 180 240 299 359 419 479 539 599 719 839 958
12 8
NC - - - - 23 28 28 37 42 53 63 75
CFM 152 228 303 379 455 531 607 683 759 910 1062 1214
12 10
NC - - - 20 24 29 33 38 43 54 64 76
CFM 184 276 367 459 551 643 735 827 918 1102 1286 1469
12 12
NC - - - 20 24 29 33 38 43 54 64 76
CFM 216 323 431 539 647 755 863 970 1078 1294 1509 1725
4500
14 12
NC - - - 21 25 30 34 39 44 55 65 77
CFM 253 380 506 633 759 886 1013 1139 1139 1524 1778 2032
14 14
NC - - - 22 26 31 35 40 40 48 58 70
CFM 425 638 851 1063 1276 1489 1701 1914 2127 2552 2977 3403
18 18
NC - - 20 24 28 33 37 42 47 58 68 80
CFM 375 563 751 938 1126 1314 1501 1689 1877 2252 2627 3003
24 12
NC - - 19 23 27 32 36 41 46 57 67 79
CFM 571 857 1142 1428 1714 1999 2285 2570 2856 3427 3998 4569
24 18
NC - - 21 25 29 34 38 43 48 59 69 81
CFM 767 1151 1534 1918 2301 2685 3068 3452 3835 4602 5369 6136
24 24
NC - 20 23 27 31 36 40 45 50 61 71 83
CFM 799 1198 1598 1997 2397 2797 3196 3595 3995 4794 5593 6392
30 20
NC - 20 23 27 27 31 36 45 50 61 71 83
CFM 963 1444 1926 2407 2889 3370 3851 4333 4814 5777 6740 7703
30 24
NC - 21 24 28 32 37 41 46 51 62 72 84
CFM 1060 1590 2120 2650 3180 3710 4240 4770 5300 6360 7420 8481
36 22
NC - 21 24 28 32 37 41 46 51 62 72 84
CFM 1159 1738 2317 2897 3476 4055 4635 5214 5793 6952 8111 9269
36 24
NC - 21 24 28 32 37 41 46 51 62 72 84
CFM 1239 1859 2478 3098 3718 4337 4957 5577 6196 7435 8675 9914
42 22
NC - 22 25 29 33 38 42 47 52 63 73 85
CFM 1470 2205 2940 3674 4409 5144 5879 6614 7349 8819 10289 11758
42 26
NC - 22 25 29 33 38 42 47 52 63 73 85
CFM 1550 2326 3101 3876 4651 5426 6201 6977 7752 9302 10852 12403
48 24
NC 20 23 26 30 34 39 43 48 53 64 74 86
CFM 1946 2919 3892 4865 5839 6812 7785 8758 9731 11677 13623 15569
48 30
NC 21 24 27 31 35 40 44 49 54 65 75 87
CFM 2342 3513 4684 5855 7026 8197 9368 10539 11710 14052 16394 18736
48 36
NC 21 24 27 31 35 40 44 49 54 65 75 87
CFM 2606 3909 5212 6515 7818 9121 10424 11727 13030 15635 18241 20847
48 40
NC 22 25 28 32 36 41 45 50 55 66 76 88
CFM 3134 4701 6267 7834 9401 10968 12535 14102 15668 18802 21936 25069
48 48
NC 23 26 29 33 37 42 46 51 56 67 77 89

REGISTERS
GRILLES &

DEFINITION OF UNITS
HEAVY DUTY GRILLES
Velocity Neck Velocity
4500
REGISTERS
GRILLES &
DOOR/TRANSFER GRILLES
METALAIRE offers a complete line of aluminum door grilles in a variety of mounting styles to
suit every application.
Aluminum Door Grille

The DG series of door and transfer grilles is available in aluminum
construction and is designed for the transfer of air through doors or walls, or
as a vision proof return. All models include V-shape louvers providing a sight-
proof return or exhaust grille regardless of the viewing angle.
DGCO Core only Recessed appearance
DGSF Single flange Finished appearance on only one side of the door or wall
DGDF Double flange Finished appearance on both sides of the door or wall
DGLP Light resistant Double core construction PAGE 166

REGISTERS
GRILLES &
MODEL DG
The DG series of door grilles is available in four models to satisfy a
variety of applications. The model DGCO is designed for applications
requiring a recessed appearance. Model DGSF is designed with a

single flange which provides a finished appearance on only one side
of the door or wall. Model DGDF is designed with a double flange
which provides a finished appearance on both sides of the door or wall.
Model DGLP is designed for applications requiring light resistant construction.
Extruded aluminum construction
Sight proof
1" inverted V louvers
Surface mount
DG
REGISTERS
GRILLES &
SERIES DG SPECIFICATIONS
DOOR GRILLE INVERTED V LOUVERS Performance Specification
EXTRUDED ALUMINUM MODELS DGCO/ The manufacturer shall provide published performance
DGSF/DGDF/DGLP data. Data shall be tested in accordance to ANSI/
Air inlets shall be models DGCO/DGSF/DGDF/DGLP ASHRAE Standard 70-2006.
manufactured by METALAIRE. Units shall be return or

exhaust grilles designed to transfer air through doors or Paint Specification
walls. Units shall be of extruded aluminum construction Process shall be anodic electro-deposition using an
and a single set of 1" inverted V louvers (Models DGCO/ anodic acrylic paint. Units shall undergo pre-treatment
DGSF/DGDF) or a double set of 1" inverted V louvers including a pressurized spray stage using an alkaline
(Model DGLP). The units shall be the size and quantity as cleaner and a de-ionized water rinse.
outlined in the plans and specifications.
Inlets shall have a narrow border (Model DGCO) providing
a recessed appearance, a single 1 1/4" border (Model
DGSF) to provide a finished appearance on one side,
a single 1 1/4" border with a telescoping rear frame
(Model DGDF) to fit varying door thickness providing a
finished appearance on both sides, or a 1 1/4" border
with double core construction (Model DGLP) to provide
DG
minimal light transmission.
Units shall include screw holes for surface mounting.
Louvers shall be on 2/3" center set at 70 and overlapped
to provide a vision proof effect. Deflector blades shall be
fixed. Units shall be designed to integrate into a wall or
door application.
DG MODEL NUMBER SPECIFICATION

Model # Width Height Available Finishes Available Options
DGCO 01 White Odd Size (Width Only)
DGSF 02 Satin Silver Fractional Size (Width Only)
6 - 48 (Single Section) 6 - 36 (Single Section)
DGDF 03 Black
DGLP 24 Mill
28 Custom Color

REGISTERS
GRILLES &
SERIES DG PERFORMANCE DATA

MODELS DGSF, DGDF
Velocity 200 300 400 500 600 700 800 900 1000
Size Ps .024 .055 .097 .151 .218 .297 .388 .491 .606
CFM 50 75 100 125 150 175 200 225 250

6x6
NC <15 19 23 26 29 32 34 37 39
CFM 67 100 133 167 200 233 267 300 333
8x6
NC 16 20 24 27 30 33 36 38 40
CFM 89 133 178 222 267 311 356 400 444
8x8
NC 17 22 25 29 32 34 37 39 42
CFM 83 125 167 208 250 292 333 375 417
10 x 6
NC 17 21 25 28 31 34 37 39 41
CFM 111 167 222 278 333 389 444 500 556
10 x 8
NC 18 23 26 30 32 35 38 40 43
CFM 139 208 278 347 417 486 556 625 694
10 x 10
NC 19 24 27 30 33 36 39 41 44
CFM 1678 250 333 417 500 583 667 750 833
12 x 10
NC 20 24 28 31 34 37 40 42 44
CFM 200 300 400 500 600 700 800 900 1000
12 x 12
DG
NC 21 25 29 32 35 38 40 43 45
CFM 233 350 467 583 700 817 933 1050 1167
14 x 12
NC 21 26 29 33 36 38 41 43 46
CFM 272 408 544 681 817 953 1089 1225 1361
14 x 14
NC 22 26 30 33 36 39 42 44 46
CFM 267 400 533 667 800 933 1067 1200 1333
16 x 12
NC 22 26 30 33 36 39 42 44 46
CFM 356 533 711 889 1067 1244 1422 1600 1778
16 x 16
NC 23 28 31 35 38 40 43 45 48
CFM 300 450 600 750 900 1050 1200 1350 1500
18 x 12
NC 23 27 31 34 37 40 42 45 47
CFM 450 675 900 1125 1350 1575 1800 2025 2250
18 x 18
NC 24 29 32 36 39 41 44 46 49
CFM 333 500 667 833 1000 1167 1333 1500 1667
20 x 12
NC 23 27 31 34 37 40 43 45 47
CFM 556 833 1111 1389 1667 1944 2222 2500 2778
20 x 20
NC 25 30 33 36 39 42 45 47 50
CFM 400 600 800 1000 1200 1400 1600 1800 2000
24 x 12
NC 24 28 32 35 38 41 43 46 48
CFM 600 900 1200 1500 1800 2100 2400 2700 3000
24 x 18
NC 26 30 34 37 40 43 45 48 50
CFM 800 1200 1600 2000 2400 2800 3200 3600 4000
24 x 24
NC 27 31 35 38 41 44 46 49 51
CFM 500 750 1000 1250 1500 1750 2000 2250 2500
30 x 12
NC 25 29 33 36 39 42 44 47 49
CFM 833 1250 1667 2083 2500 2917 3333 3750 4167
30 x 20
NC 27 31 35 38 41 44 47 49 51
CFM 1000 1500 2000 2500 3000 3500 4000 4500 5000
30 x 24
NC 28 32 36 39 42 45 47 50 52
CFM 1250 1875 2500 3125 3750 4375 5000 5625 6250
30 x 30
NC 29 33 37 40 43 46 48 51 53
Throw N/A N/A N/A N/A N/A N/A N/A N/A N/A
REGISTERS
GRILLES &
PERFORMANCE NOTES FOR SERIES DG
DEFINITION OF UNITS
Velocity fpm (Feet per Minute)
CFM Cubic Feet per Minute (Air)
DG

REGISTERS
GRILLES &
REVERSIBLE CORE GRILLES

AND REGISTERS
METALAIRE Revers-A-Core grilles and registers are designed for a clean architectural
appearance without sacrificing air pattern flexibility.
Aluminum Heavy Duty Return

Revers-A-Core grilles and registers combine rugged aluminum construction,
architectural design, and a flexible air pattern. The fixed louver core can be
rotated or reversed to achieve any of four different air patterns. Revers-A-
Core grilles are available in three frame styles; the F style with flat frame
border, C type with curved frame border; and RC type with radius curved sub-
frame which permits removed of the inner frame and core without affecting
the units installation.
41C Single deflection Curved border Removable core
42C Double deflection Curved border Removable core
41F Single deflection Flat border Removable core
42F Double deflection Flat border Removable core
RC41C Single deflection Radius curved border Removable and reversible core
RC42C Double deflection Radius curved border Removable and reversible core PAGE 171
REGISTERS
GRILLES &
MODEL RC
The RC series reversible core grilles and registers combine rugged
aluminum construction, a clean architectural design, and extremely

flexible air pattern control. The fixed louvered core is removable from
the face and can be rotated or reversed to achieve any of four different
air patterns. The RC series is available in single deflection (41C/41F/RC41C)
and double deflection (42C/42F/RC42C).
It is also available in three frame styles, curved (41C/42C),
flat (41F/42F) and radius curved (RC41C/RC42C).
Four position removable and reversible core
Optional damper in steel (OBD) or aluminum (OBDA) construction
Model: 41C-1 ( Single Deflection Grille ) Model: 42C-1 ( Double Deflection Grille )
( Curved Border ) ( Curved Border )
Adjustable
RC
Duct Size = Listed Size Rear Blades
Mounting Hole Listed Size - 14
Mounting
Listed Size - 41
Gasket Hole
5 3 Gasket
216 5
1 1 1
116 4 4
15 1 15 1
141 4 141 4
Listed Size = 281

Listed Size = 281
Model: 41F-1 ( Single Deflection Grille ) Model: 42F-1 ( Double Deflection Grille )
( Flat Border ) ( Flat Border )
Adjustable
Duct Size = Listed Size Duct Size = Listed Size
Mounting Hole Rear Blades
Gasket Mounting
5 Hole
1 1 3 Gasket
116 4
216 5
1
4
15 1
141 4
1
15
114 4
Listed Size = 281 Listed Size = 281
Model: RC41C-1 ( Single Deflection Grille ) Model: RC42C-1 ( Double Deflection Grille )
( Curved Border ) ( Curved Border )
( Removable Inner Frame ) ( Removable Inner Frame )
Duct size = Listed Size + 21
Duct size = Listed Size + 21 Listed Size + 14 Rear Blade

Listed Size + 41 Mounting Hole Listed size - 14 Mounting Hole
RC Frame
Listed Size - 41 RC Frame 5
5
3 3 238
8 121 8 112
15 1
138 15 1
138
4 4
Listed Height + 238 Listed Height + 238
Face view (41C-1,42C-1,41F-1,42F-1) Face view (RC41C-1,RC42C-1)

Removable and Reversible Core
Removable and Reversible Core
RC
Frame
3
Mullion Support Blades Mullion Support Blades 4
5" Centers Maximum 5" Centers Maximum 5
Listed Width - 58 8
Listed Width +281
Listed Width + 2 38

REGISTERS
GRILLES &
Model: 41C OBD ( Single Deflection Register - Curved Border) Model: 42C OBD ( Double Deflection Register - Curved Border )
( With Opposed Blade Damper) ( With Opposed Blade Damper )
Options:
Duct Size = Listed Size Options: Listed Size - 81
Adjustable
Mounting Hole Rear Blades
Gasket 358 Mounting Hole

221 3
216 5 Gasket
1 1 1
116 4 4
15 1 15 1
141 4 141 4
Listed Size = 2 81
Listed Size = 2 81
Model: 41F OBD ( Single Deflection Register - Flat Border ) Model: 42F OBD ( Double Deflection Register - Flat Border )
( With Opposed Blade Damper ) ( With Opposed Blade Damper )
Duct Size = Listed Size Options:
Duct Size = Listed Size Options:
Listed Size - 81
Mounting Hole Adjustable Rear Blades

Gasket
221 358 Mounting Hole
1 1 Gasket
116 4
1
4
15 1
141 4
1
15
141 4
Listed Size = 2 81 Listed Size = 2 81
RC
Model: RC41C OBD ( Single Deflection Register - Curved Border ) Model: RC42C OBD ( Double Deflection Register - Curved Border )
( Removable Inner Frame ) ( Removable Inner Frame )
( With Opposed Blade Damper ) ( With Opposed Blade Damper )
Duct Size = Listed Size + 21
Duct Size = Listed Size + 21 Options:
Options: Listed Size - 81
Rear Blade
Mounting Hole Mounting Hole
RC Frame
RC Frame
321
212
3 3 238
8 121 8 121
15 1
138 15 1
138
4 4
Listed Height + 2 38 Listed Height + 2 38
REGISTERS
GRILLES &
SERIES RC SPECIFICATIONS
REVERSIBLE CORE GRILLE Performance Specification
FIXED LOUVERED CORE The manufacturer shall provide published performance
EXTRUDED ALUMINUM data. Data shall be tested in accordance to ANSI/

MODELS 41C/42C/41F/42F/RC41C/
RC42C
Paint Specification
Air outlets shall be models 41C/42C/41F/42F/RC41C/
RC42C manufactured by METALAIRE. Units shall be single
deflection (41C/41F/RC41C) consisting of a single set of
aluminum fixed fins or double deflection (42C/42F/RC42C)
consisting of a single set of aluminum fixed fins and a
rear set of adjustable control blades that allow the spread
of the discharge air pattern.
Units shall have a 1 1/4" curved outer border (41C/42C)
or 1 1/4" flat outer border (41F/42F) or 1 1/4" curved outer
border (RC41C/RC42C) with a 3/4" radius. The units shall
be the size and quantity as outlined in the plans and
specifications. The inlet shall have a removable core with
RC
a 5/8" inner border that includes fixed louver fins that
can be set to 5 or 15, upward or downward air pattern.
The removable core shall be held in place with spring
clips. The inner core assembly shall have fins on 1/4"
centers and include mullion support bars on 5" maximum
spacing. Units shall be designed for surface mounting
applications and be designed to be fastened inside the
duct opening with hidden screws.

REGISTERS
GRILLES &
RC MODEL NUMBER SPECIFICAION

REMOVABLE CORE GRILLES AND REGISTERS EXTRUDED ALUMINUM
REVERS-A-CORE SURFACE MOUNT
Model Neck
41C-1 Curved Frame Single Deflection 28 30 32 34 36 38 40 42 44 46 48

41F-1 Flat Frame Single Deflection 6 X X X X X X X X X X X
RC41C-1 Curved Mounting Frame Single Deflection 8 X X X X X X X X X X X
42C-1 Curved Frame Double Deflection 10 X X X X X X X X X X X
42F-1 Flat Frame Double Deflection 12 X X X X X X X X X X X
RC42C-1 Curved Mounting Frame Double Deflection 14 X X X X X X X X X X X

RC

24 Mill PF Plaster Frame
28 Custom Color TBPF T-bar Plaster Frame
Available Options
NSH No Screw Holes
REGISTERS
GRILLES &
REVERS-A-CORE T-BAR LAY-IN
Model Neck

41F-6 Flat Frame Single Deflection 6 8 10 12 14 16 18 20 22 24 Panel
42F-6 Flat Frame Double Deflection 4 X X
6 X X
12 x 12
8 X X
10 X
4 X X X X X X X X
6 X X X X X X X X
24 x 12
8 X X X X X X X X
10 X
4 X X X X X X X X
6 X X X X X X X X
8 X X X X X X X X
10 X X X X X X X X
RC
12 X X X X X X X X
24 x 24
14 X X X X X X X X
16 X X X X X X X X
18 X X X X X X X X
20 X X X X X X X X
22 X
12 X X X X X X X X X X 48 x 24

03 Black TBPF T-bar Plaster Frame
24 Mill
28 Custom Color

REGISTERS
GRILLES &

REVERS-A-CORE T-BAR LAY-IN
Model Neck
41F-6 Flat Frame Single Deflection 26 28 30 32 34 36 38 40 42 44 46 Panel

42F-6 Flat Frame Double Deflection 4 X X X X X X X X X X
48 x 24
22 X

RC

03 Black TBPF T-bar Plaster Frame
24 Mill
28 Custom Color
REGISTERS
GRILLES &
SERIES RC PERFORMANCE DATA
MODELS 41C, 42C, 41F, 42F, RC41C, RC42C
Size
CFM 18 x 12 20 x 12 20 x 16 24 x 16 24 x 20 30 x 18 24 x 24 30 x 20 36 x 18 36 x 20 36 x 24 NC

Velocity 267 240
400
Ps .025 .020
Throw 24-17-13 23-16-13
500
Ps .040 .032 .018

Throw 28-20-15 27-19-15 24-14-13
Velocity 400 360 270 225
600
Ps .057 .046 .026 .018

Throw 31-22-17 30-21-17 27-19-15 26-18-14
Velocity 467 420 315 263 210
700
Ps .077 .062 .035 .025 .015

Throw 35-25-19 34-24-18 30-22-17 29-20-16 26-19-15
25
Velocity 533 480 360 300 240 213 200
RC
800
Ps .101 .081 .046 .032 .020 .018 .014

Throw 38-27-21 37-26-20 33-24-18 31-22-17 29-21-16 28-20-15 27-20-15
Velocity 600 540 405 338 270 240 225 216 200
900
Ps .127 .103 .058 .040 .027 .020 .018 .016 .014

Throw 41-29-23 40-28-22 36-26-20 34-24-19 31-22-17 30-21-17 29-21-17 29-21-16 28-20-16
Velocity 667 600 450 375 300 267 256 240 222 200
1000
Ps .157 .127 .072 .050 .032 .026 .023 .020 .018 .014
Throw 45-32-25 43-31-24 39-28-21 37-26-20 34--24-19 32-23-18 31-22-17 31-22-17 31-22-17 29-21-16
Velocity 800 720 540 450 360 320 300 288 267 240 200
1200
Ps .226 .183 .102 .072 .046 .037 .032 .028 .026 .020 .014
Throw 51-36-28 49-35-27 44-31-24 41-29-23 38-27-21 37-26-20 36-25-20 36-25-20 35-25-19 33-24-18 31-22-17
NC 35-40 25-30

REGISTERS
GRILLES &
SERIES RC PERFORMANCE DATA

MODELS 41C, 42C, 41F, 42F, RC41C, RC42C
Size
CFM
20x12 20x16 24x16 24x20 30x18 24x24 30x20 36x18 36x20 36x24 42x22 48x22 48x24 NC
Velocity 840 630 525 420 373 350 336 311 280 233 218
1400
Ps .245 .142 .100 .062 .050 .045 .040 .033 .027 .019 .015
Throw 54-39-30 49-35-27 46-33-25 43-30-24 41-29-23 40-28-22 40-28-22 39-27-21 37-26-20 35-25-19 34-24-19
Velocity 720 600 480 427 400 384 356 320 267 249 218 200
1600
Ps .183 .127 .081 .075 .058 .052 .044 .037 .024 .023 .015 .014
Throw 54-38-30 51-36-28 47-33-26 45-32-25 44-31-25 43-31-24 42-30-23 41-29-22 38-27-21 37-27-21 36-25-20 35-25-19 25
Velocity 750 600 533 500 480 444 400 333 312 273 250
2000
Ps .199 .127 .101 .082 .081 .070 .057 .039 .035 .027 .023
Throw 59-42-32 55-39-30 52-37-29 51-36-28 51-36-28 49-35-27 48-34-26 45-32-25 44-31-24 42-30-23 40-29-22
Velocity 750 667 625 600 556 500 417 390 341 313
2500
Ps .199 .160 .141 .127 .105 .088 .062 .060 .040 .035
Throw 64-45-35 61-43-34 60-42-33 5-42-32 57-41-32 55-39-30 52-37-29 51-36-28 49-34-27 47-33-26
Velocity 900 800 750 720 667 600 500 468 409 375
RC
3000
Ps .286 .226 .199 .183 .164 .127 .088 .076 .058 .050
Throw 72-51-40 69-49-38 68-48-37 67-47-37 65-46-36 63-45-35 59-42-32 58-41-32 55-39-30 53-38-29
Velocity 875 840 778 700 583 545 477 438
3500
Ps .270 .245 .220 .173 .121 .100 .079 .070

Throw 75-53-41 74-53-41 72-51-40 70-49-38 65-46-36 64-45-35 61-43-34 56-40-31
NC 35-40 25-30
PERFORMANCE NOTES FOR SERIES RC

DEFINITION OF UNITS
Velocity Neck velocity of air stream in Feet per Minute
REGISTERS
GRILLES &
INDUSTRIAL GRILLES
MODEL 4100 MODEL 4200
INDUSTRIAL GRILLES
MODEL 4300 MODEL RL
METALAIRE offers a complete line of industrial grilles for applications that require specialized
performance or construction characteristics.
Aluminum Multi-Core Supply Grilles 4 3/8"

Deep Frame 1 1/2" Blades on 1 1/2" Center
The 4100 series of industrial grilles is designed for high capacity air
distribution in an industrial environment. The series is designed for ceiling
and high sidewall installation.
4152 Single deflection
4152IF Single deflection Inverted frame
4152TLF Single deflection Trunk latch frame
4152MF Single deflection Modular frame
4154 Double deflection
4154IF Double deflection Inverted frame
4154TLF Double deflection Trunk latch frame
4154MF Double deflection Modular frame

PAGE 181

REGISTERS
GRILLES &
Aluminum Multi-Core Supply Grilles 1 7/8"

Shallow Frame 1 1/2" Blades on 1 1/2" Center
distribution in an industrial environment. The shallow frame permits
deflectors to project past the frame for a greater deflection angle.
INDUSTRIAL GRILLES
4252IF Single deflection Inverted frame
4252TLF Single deflection - Trunk latch frame
4252MF Single Deflection Modular frame
4254IF Double deflection - Inverted frame
4254TLF Double deflection - Trunk latch frame
4254MF Double deflection Modular frame PAGE 184
Aluminum Multi-Core Supply Grilles 7"

Deep Frame 3" Blades on 3" Center
distribution in an industrial environment. The wider blade spacing offers
superior control of large volumes of air and minimum pressure drop.
4352MF Single deflection Modular frame
4354MF Double deflection Modular frame

PAGE 186
Aluminum Roto Louver Supply

The RL series roto louver is designed to provide jet or diffused air patterns
in ceiling, sidewall and exposed duct applications. The RL series is ideal for
vertical spot cooling or heating when mounted in the ceiling or on the bottom
of exposed ductwork.
RL Cylindrical drum Standard blades
RLDF Cylindrical drum Dual flow blades
RLGO Cylindrical drum Standard blades Gang operator PAGE 215
REGISTERS
GRILLES &
MODEL 4100
The 4100 series is designed for high capacity air distribution in an
industrial environment. The series is designed for ceiling and high
sidewall installation. The 4100 is available in single (4152) and
double (4154) deflection and is heavy duty aluminum construction.
4 3/8" deep frame with 1 1/2" blades on 1 1/2" center
Available in vertical (V4152/V4154) or horizontal (H4152/H4154) blade orientation
1 1/2" frame border with face screw holes
Optional inverted frame (4152-IF/4154-IF)
INDUSTRIAL
GRILLES
Optional trunk latch frame (4152-TLF/4154-TLF)
Optional modular frame (4152-MF/4154-MF)
Optional air foil blades
Optional gang operator (GOV/GOH)
4100/4200/4300

REGISTERS
GRILLES &
INDUSTRIAL GRILLES
4100/4200/4300
METALAIRE
METALAIRE
REGISTERS
GRILLES &
Duct Dimension W
H (Duct
Listed Size) Model 1 Model 2 Model 3 Model 4
8 8 19 30 41
10 10 23 36 49
INDUSTRIAL GRILLES
12 12 27 42 57
15 15 33 51 69
4100/4200/4300

REGISTERS
GRILLES &
MODEL 4200
The 4200 series is designed for high capacity air distribution in an
industrial environment. The shallow collar permits deflectors to
project past the frame for a greater deflection angle. The 4200 is
available in single (4252) and double (4254) deflection and is heavy
INDUSTRIAL GRILLES
duty aluminum construction.

1 7/8" shallow frame with 1 1/2" blades on 1 1/2" center
1 3/16" frame border with face screw holes
Optional inverted frame (4252-IF/4254-IF)
Optional trunk latch frame (4252-TLF/4254-TLF)
Optional modular frame (4252-MF/4254-MF)
Optional air foil blades
Optional gang operator (GOV/GOH)

4100/4200/4300
GRILLES &
INDUSTRIAL GRILLES 4100/4200/4300
REGISTERS
GR185
REGISTERS
GRILLES &
MODEL 4300
distribution in an industrial environment. The wider blade spacing
offers superior control of large volumes of air with minimum
pressure drop. The 4300 is available in single (4352) and double
INDUSTRIAL GRILLES
(4354) deflection and is heavy duty aluminum construction.

7" deep frame with 3" blades on 3" center
1 1/2 " frame border with face screw holes
Optional modular frame (4352MF/4354MF)
Optional gang operator

4100/4200/4300
REGISTERS
GRILLES &
SERIES 4100/4200/4300 SPECIFICATIONS
MULTI-CORE SUPPLY GRILLES Performance Specification
ALUMINUM MODELS The manufacturer shall provide published performance
4152/4154/4252/4254/4352/4354 data. Data shall be tested in accordance to ANSI/
Air outlets shall be models V4152/V4154/V4252/V4254/ ASHRAE Standard 70-2006.
V4352/V4354 with vertical front blades or H4152/H4154/
INDUSTRIAL GRILLES
H4252/H4254/H4352/H4354 with horizontal front blades Paint Specification
manufactured by METALAIRE. Units shall be single Process shall be anodic electro-deposition using an
deflection (4152/4252/4352), with a single set of blades, anodic acrylic paint. Units shall undergo pre-treatment
or double deflection (4154/4254/4354), with a single including a pressurized spray stage using an alkaline
set of front and rear blades. Units shall be of extruded cleaner and a de-ionized water rinse.
aluminum construction.
The units shall be the size and quantity as outlined in the
plans and specifications. The border shall be 1 1/2" wide
with individually adjustable, aerodynamically shaped
deflector blades. Units shall be designed for surface
mounting applications and be provided with screw holes
on the face of the device. The blades shall pivot in friction
4100/4200/4300
blade position throughout the specified operating range of
the device. Metal friction wires are not acceptable.
4100 series outlets shall have 4 3/8" deep frame with
1 1/2" blades on 1 1/2" center.
4200 series outlets shall have 1 7/8" shallow frame with
1 1/2" blades on 1 1/2" center.
4300 series outlets shall have 7" deep frame with
3" blades on 3" center.
Optional opposed blade damper shall be constructed
of steel (Model OBD) or aluminum (Model OBDA)
Note: Damper is not available on the 4300 series
Damper must be operable from the face of the unit.

REGISTERS
GRILLES &

4100 INDUSTRIAL GRILLE
Model Neck
V4152 Vertical Single Defleciton 6 8 10 12 14 16 18 20 22 24 26
H4152 Horizontal Single Deflection 4 X X X X X X X X X X X
INDUSTRIAL GRILLES
V4154 Vertical Double Deflection 5 X X X X X X X X X X X

H4154 Horizontal Double Deflection 6 X X X X X X X X X X X
V4152 IF Vertical Single Deflection Inverted Frame 8 X X X X X X X X X X X
H4152 IF Horizontal Single Deflection Inverted Frame 10 X X X X X X X X X X X
V4154 IF Vertical Double Deflection Inverted Frame 12 X X X X X X X X X X X
H4154 IF Horizontal Double Deflection Inverted Frame 14 X X X X X X X X X X X
4100/4200/4300

02 Satin Silver OBDA Aluminum Opposed Blade Damper
Optional GOV Gang Operator Vertical
01 White GOH Gang Operator Horizontal
03 Black AF Air Foil Blades
04 Clear Anodize
24 Mill
28 Custom Color TR Deep
REGISTERS
GRILLES &
Model Neck
INDUSTRIAL GRILLES
4100/4200/4300

04 Clear Anodize
24 Mill

REGISTERS
GRILLES &

Model Neck
V4152-TLF Single Def. Vert. Blades Trunk Latch Frame 6 8 10 12 14 16 18 20 22 24 26
H4152-TLF Single Def. Hor. Blades Trunk Latch Frame 6 X X X X X X X X X X X
INDUSTRIAL GRILLES
V4154-TLF Dble Def. Vert. Blades Trunk Latch Frame 8 X X X X X X X X X X

H4154-TLF Dble Def. Hor. Blades Trunk Latch Frame 10 X X X X X X X X X
12 X X X X X X X X
14 X X X X X X X
16 X X X X X X
18 X X X X X
20 X X X X
22 X X X
24 X X
26 X
4100/4200/4300
Model Neck
V4154-TLF Dble Def. Vert. Blades Trunk Latch Frame 8 X X X X X X X X X X X
H4154-TLF Dble Def. Hor. Blades Trunk Latch Frame 10 X X X X X X X X X X X

04 Clear Anodize
24 Mill
REGISTERS
GRILLES &
Model Neck
INDUSTRIAL GRILLES
34 X X X X X X X X
36 X X X X X X X
38 X X X X X X
40 X X X X X
42 X X X X
44 X X X
46 X X
48 X
4100/4200/4300
04 Clear Anodize
24 Mill

REGISTERS
GRILLES &

V4152-MF Single Deflection Vertical Blades Modular Frame 1 2 3 4 Standard
H4152-MF Single Deflection Horizontal Blades Modular Frame 8x8 X X X X 02 Satin Silver
INDUSTRIAL GRILLES
V4154-MF Double Deflection Vertical Blades Modular Frame 10 x 10 X X X X Optional

H4154-MF Double Deflection Horizontal Blades Modular Frame 12 x 12 X X X X 01 White
15 x 15 X X X X 03 Black
04 Clear Anodize
24 Mill
28 Custom Color
GOV Gang Operator Vertical
GOH Gang Operator Horizontal
AF Air Foil Blades
4100/4200/4300
REGISTERS
GRILLES &
Model Neck
INDUSTRIAL GRILLES
4100/4200/4300

04 Clear Anodize
24 Mill

REGISTERS
GRILLES &

Model Neck
INDUSTRIAL GRILLES

4100/4200/4300

04 Clear Anodize
24 Mill
REGISTERS
GRILLES &
Model Neck
INDUSTRIAL GRILLES
12 X X X X X X X X
14 X X X X X X X
16 X X X X X X
18 X X X X X
20 X X X X
22 X X X
24 X X
26 X
4100/4200/4300
Model Neck

04 Clear Anodize
24 Mill

REGISTERS
GRILLES &

Model Neck
INDUSTRIAL GRILLES

34 X X X X X X X X
36 X X X X X X X
38 X X X X X X
40 X X X X X
42 X X X X
44 X X X
46 X X
48 X

4100/4200/4300

04 Clear Anodize
24 Mill

04 Clear Anodize
24 Mill
28 Custom Color
AF Air Foil Blades
REGISTERS
GRILLES &
Model Neck
INDUSTRIAL GRILLES
V4352-IF Vertical Single Deflection Inverted Frame 12 X X X X X X X X X X X
H4352-IF Horizontal Single Deflection Inverted Frame 14 X X X X X X X X X X X
V4354-IF Vertical Double Deflection Inverted Frame 16 X X X X X X X X X X X
H4354-IF Horizontal Double Deflection Inverted Frame 18 X X X X X X X X X X X
4100/4200/4300

04 Clear Anodize
24 Mill

REGISTERS
GRILLES &

Model Neck
INDUSTRIAL GRILLES

V4352-IF Vertical Single Deflection Inverted Frame 12 X X X X X X X X X X X
H4352-IF Horizontal Single Deflection Inverted Frame 14 X X X X X X X X X X X
V4354-IF Vertical Double Deflection Inverted Frame 16 X X X X X X X X X X X
H4354-IF Horizontal Double Deflection Inverted Frame 18 X X X X X X X X X X X
4100/4200/4300

04 Clear Anodize
24 Mill
REGISTERS
GRILLES &
Model Neck
INDUSTRIAL GRILLES
12 X X X X X X X X
14 X X X X X X X
16 X X X X X X
18 X X X X X
20 X X X X
22 X X X
24 X X
26 X
4100/4200/4300
Model Neck

04 Clear Anodize
24 Mill

REGISTERS
GRILLES &

Model Neck
INDUSTRIAL GRILLES

34 X X X X X X X X
36 X X X X X X X
38 X X X X X X
40 X X X X X
42 X X X X
44 X X X
46 X X
48 X

4100/4200/4300

04 Clear Anodize
24 Mill

04 Clear Anodize
24 Mill
28 Custom Color
AF Air Foil Blades
REGISTERS
GRILLES &
SERIES 4100/4200/4300 PERFORMANCE DATA
MODELS 4100, 4200, 4300
No Mullions
12 x 10
Size 12 x 6 14 x 6 10 x 8
CFM Deflection 0 22.5 45 0 22.5 45 0 22.5 45
INDUSTRIAL GRILLES
Throw 7 5 4
100
Pt .006 .007 .012
NC - - -
Velocity 490 515 655 435 453 575 365 385 490
Throw 10 8 5 10 8 5 9 7 5
150
Pt .015 .016 .027 .012 .013 .020 .008 .009 .015
NC - - - - - - - - -
Velocity 655 685 875 580 605 770 490 510 650
Throw 14 10 8 13 10 7 12 9 7
200
Pt .027 .029 .048 .020 .023 .037 .015 .016 .026
NC - - - - - - - - -
Velocity 820 855 1090 720 755 960 610 640 815
4100/4200/4300
Throw 18 14 10 16 12 9 15 11 8
250
Pt .042 .045 .074 .032 .035 .057 .023 .025 .041
NC - - - - - - - - -
Velocity 985 1025 1310 865 905 1155 735 765 975
Throw 21 16 11 20 15 11 18 14 10
300
Pt .060 .065 .107 .047 .051 .083 .034 .036 .059
NC - - - - - - - - -
Velocity 1145 1195 1525 1010 1055 1345 855 895 1140
Throw 25 19 14 23 18 13 21 16 11
350
Pt .082 .089 .145 .063 .069 .113 .045 .050 .081
NC 24 25 30 20 21 26 - - -
Velocity 1310 1370 1745 1155 1210 1540 980 1025 1300
Throw 28 21 15 27 21 15 24 18 13
400
Pt .107 .117 .190 .083 .091 .148 .059 .065 .105
NC 28 29 34 24 25 30 20 21 26
Velocity 1475 1540 1965 1300 1360 1730 1100 1150 1465
Throw 31 24 17 30 23 16 27 21 15
450
Pt .135 .148 .241 .105 .115 .186 .075 .082 .134
NC 31 32 37 27 28 33 23 24 29
Velocity 1640 1710 2185 1445 1510 1925 1225 1280 1600
Throw 35 27 19 33 25 18 31 24 17
500
Pt 0.167 0.182 0.297 0.13 0.142 0.231 0.093 0.102 0.166
NC 35 36 41 31 32 37 27 28 33
Velocity 1735 1810 2305 1470 1535 1955
Throw 40 31 22 37 28 20
600
Pt .187 .204 .331 .135 .147 .238
NC 36 37 42 32 33 38
Velocity 1715 1790 2280
Throw 43 33 24
700
Pt .183 .199 .324
NC 37 38 42

REGISTERS
GRILLES &

MODELS 4100, 4200, 4300
No Mullions
12 x 10 16 x 8
Size 16 x 6 22 x 6
CFM Deflection 0 22.5 45 0 22.5 45
INDUSTRIAL GRILLES
Velocity 385 400 510 365 380 485

Throw 11 8 4 11 8 6
200
Pt .009 .010 .016 .008 .009 .015
NC - - - - - -
Velocity 480 500 640 455 475 605
Throw 13 10 7 13 10 7
250
Pt .014 .015 .025 .013 .014 .023
NC - - - - - -
Velocity 575 600 765 545 570 725
Throw 16 12 9 16 12 9
300
Pt .020 .022 .036 .018 .020 .033
NC - - - - - -
Velocity 675 700 895 635 665 845
Throw 19 15 10 18 14 10
350
4100/4200/4300
Pt .028 .030 .050 .025 .027 .044

NC - - - - - -
Velocity 770 805 1025 725 760 965
Throw 22 17 12 21 16 11
400
Pt .037 .040 .065 .033 .036 .058
NC - - - - - -
Velocity 865 905 1150 820 855 1085
Throw 24 18 13 24 18 13
450
Pt .047 .051 .082 .042 .045 .073
NC - - - - - -
Velocity 960 1005 1280 910 950 1205
Throw 27 21 15 26 20 14
500
Pt 0.057 0.063 0.102 0.052 0.056 0.09
NC 20 21 26 - - -
Velocity 1155 1205 1535 1090 1340 1450
Throw 33 25 18 32 25 18
600
Pt .083 .090 .147 .074 .112 .131
NC 26 27 32 23 24 29
Velocity 1345 1405 1790 1270 1330 1690
Throw 38 29 21 37 28 20
700
Pt .113 .123 .199 .100 .110 .178
NC 30 31 36 28 29 34
Velocity 1540 1605 2045 1455 1520 1930
Throw 43 33 24 42 32 23
800
Pt .148 .160 .260 .132 .144 .232
NC 34 35 40 32 33 38
Velocity 1730 1805 2300 1635 1705 2175
Throw 49 38 27 48 37 26
900
Pt .186 .203 .329 .166 .181 .295
NC 38 39 44 35 36 41
Velocity 1820 1895 2415
Throw 53 41 29
1000
Pt .206 .224 .364
NC 39 40 45
REGISTERS
GRILLES &
MODELS 4100, 4200, 4300
One Front Mullion
34 x 6
Size 24 x 6 30 x 6 20 x 10
CFM Deflection 0 22.5 45 0 22.5 45 0 22.5 45
INDUSTRIAL GRILLES
Throw 11 8 6
200
Pt .007 .008 .014
NC - - -
Velocity 445 465 590 350 365 465
Throw 14 11 8 12 9 7
250
Pt .012 .013 .021 .007 .008 .013
NC - - - - - -
Velocity 535 560 710 420 440 560 370 385 490
Throw 16 12 9 14 11 8 14 11 8
300
Pt .017 .019 .031 .010 .012 .019 .008 .009 .014
4100/4200/4300
NC - - - - - - - - -
Velocity 625 650 830 490 515 655 430 450 575
Throw 19 15 10 17 13 9 16 12 9
350
Pt .024 .026 .043 .014 .016 .026 .011 .012 .020
NC - - - - - - - - -
Velocity 715 745 945 565 590 745 495 515 655
Throw 22 17 12 20 15 11 18 14 10
400
Pt .031 .034 .055 .019 .021 .034 .015 .016 .026
NC - - - - - - - - -
Velocity 805 840 1065 635 660 840 555 580 735
Throw 25 19 14 22 17 12 20 15 11
450
Pt .040 .044 .070 .025 .027 .044 .019 .020 .033
NC - - - - - - - - -
Velocity 890 930 1185 705 735 935 615 645 820
Throw 27 21 15 24 18 13 23 18 13
500
Pt 0.049 0.053 0.087 0.03 0.033 0.054 0.23 0.025 0.042
NC - - - - - - - - -
Velocity 1070 1120 1420 845 880 1120 740 775 985
Throw 33 25 18 29 22 16 27 21 15
600
Pt .071 .078 .125 .044 .048 .078 .034 .037 .060
NC 23 24 30 - - - - - -
Velocity 1250 1305 1660 985 1030 1310 865 900 1145
Throw 38 29 21 34 26 19 32 25 18
700
Pt .097 .106 .172 .060 .066 .107 .046 .050 .082
NC 27 28 33 23 24 29 - - -

REGISTERS
GRILLES &

MODELS 4100, 4200, 4300
One Front Mullion
34 x 6
Size 24 x 6 30 x 6 20 x 10
CFM Deflection 0 22.5 45 0 22.5 45 0 22.5 45
INDUSTRIAL GRILLES
Velocity 1430 1490 1895 1125 1175 1495 985 1030 1310
Throw 44 34 24 39 30 21 36 28 20
800
Pt .127 .138 .223 .078 .086 .139 .060 .066 .107
NC 31 32 37 28 29 34 22 23 28
Velocity 1605 1680 2130 1265 1325 1680 1110 1160 1475
Throw 49 38 27 44 34 24 41 31 22
900
Pt .161 .176 .282 .099 .109 .176 .076 .083 .136
NC 35 36 42 31 32 37 25 26 31
Velocity 1785 1865 2370 1410 1470 1870 1235 1290 1640
Throw 55 42 30 49 38 27 46 35 25
1000
Pt .199 .216 .350 .124 .135 .218 .095 .103 .167
4100/4200/4300
NC 38 39 44 34 35 41 29 30 35
Velocity 1550 1615 2055 1360 1415 1805
Throw 54 41 30 50 38 27
1100
Pt .150 .163 .263 .115 .124 .203
NC 37 38 44 32 33 38
Velocity 1690 1765 2240 1480 1545 1965
Throw 59 45 32 55 42 30
1200
Pt .178 .194 .313 .137 .149 .241
NC 40 41 46 34 35 40
Velocity 1605 1675 2130
Throw 59 45 32
1300
Pt .161 .175 .282
NC 37 38 43
Velocity 1730 1805 2295
Throw 64 49 35
1400
Pt .186 .203 .327
NC 39 40 45
REGISTERS
GRILLES &
MODELS 4100, 4200, 4300
One Front Mullion
38 x 6 30 x 8 36 x 8
28 x 8 24 x 10 28 x 10
Size 22 x 10 20 x 12 20 x 16
INDUSTRIAL GRILLES
CFM Deflection 0 22.5 45 0 22.5 45 0 22.5 45
Velocity 395 410 520 360 375 480 305 315 405
Throw 15 11 8 14 11 8 13 10 7
350
Pt .009 .010 .017 .008 .009 .014 .005 .006 .010
NC - - - - - - - - -
Velocity 450 470 595 410 430 545 345 360 460
Throw 17 13 9 16 12 9 15 11 8
400
Pt .012 .013 .022 .010 .011 .018 .007 .008 .013
NC - - - - - - - - -
Velocity 505 525 670 465 485 615 390 410 520
Throw 20 15 11 18 14 10 17 13 9
450
Pt .015 .017 .027 .013 .014 .023 .009 .010 .017
NC - - - - - - - - -
Velocity 560 585 745 515 540 685 435 455 575
4100/4200/4300
Throw 22 17 12 21 16 11 19 14 10
500
Pt 0.019 0.021 0.034 0.016 0.018 0.029 0.011 0.012 0.02
NC - - - - - - - - -
Velocity 675 705 895 620 645 820 520 545 690
Throw 26 20 14 25 19 14 23 18 12
600
Pt .028 .030 .049 .023 .025 .042 .017 .018 .029
NC - - - - - - - - -
Velocity 785 820 1045 720 755 960 610 635 810
Throw 30 23 16 29 22 16 26 20 14
700
Pt .038 .042 .068 .032 .035 .057 .023 .025 .040
NC - - - - - - - - -
Velocity 900 935 1195 825 860 1095 695 725 925
Throw 35 27 19 33 25 18 31 24 17
800
Pt .050 .054 .089 .042 .046 .074 .030 .032 .053
NC - - - - - - - - -
Velocity 1010 1055 1345 925 970 1230 780 815 1040
Throw 39 30 21 37 28 20 34 26 19
900
Pt .063 .069 .113 .053 .058 .094 .038 .041 .067
NC 23 24 29 20 21 26 - - -
Velocity 1125 1170 1490 1030 1075 1370 870 905 1155
Throw 44 34 24 42 32 23 36 28 20
1000
Pt .078 .085 .138 .066 .072 .117 .047 .051 .083
NC 26 27 32 24 25 30 - - -
Velocity 1235 1290 1640 1135 1185 1505 955 1000 1270
Throw 48 37 26 46 35 25 42 32 23
1100
Pt .095 .103 .167 .080 .087 .141 .057 .062 .100
NC 29 30 35 27 28 34 21 22 27
Velocity 1350 1405 1790 1235 1290 1645 1045 1090 1385
Throw 52 40 29 50 38 27 46 35 25
1200
Pt .113 .123 .200 .095 .103 .169 .068 .074 .119
NC 32 33 38 29 30 35 24 25 30

REGISTERS
GRILLES &

MODELS 4100, 4200, 4300
One Front Mullion
38 x 6 30 x 8 36 x 8
28 x 8 24 x 10 28 x 10
Size 22 x 10 20 x 12 20 x 16
INDUSTRIAL GRILLES
CFM Deflection 0 22.5 45 0 22.5 45 0 22.5 45

Velocity 1460 1525 1940 1340 1400 1780 1130 1180 1500
Throw 57 44 31 54 41 30 49 38 27
1300
Pt .133 .145 .234 .112 .122 .198 .079 .086 .140
NC 34 35 40 32 33 38 26 27 32
Velocity 1575 1640 2090 1445 1505 1915 1215 1270 1615
Throw 61 47 33 59 45 32 53 41 29
1400
Pt .155 .167 .272 .130 .141 .228 .092 .100 .163
NC 36 37 42 34 35 40 28 29 34
Velocity 1685 1760 2240 1545 1615 2055 1305 1360 1730
Throw 65 50 36 63 48 34 57 44 31
1500
Pt .177 .193 .313 .149 .163 .263 .106 .115 .186
4100/4200/4300
NC 38 39 44 36 37 42 31 32 37
Velocity 1795 1875 2390 1650 1720 2190 1390 1450 1845
Throw 70 54 38 67 51 37 61 47 33
1600
Pt .201 .219 .356 .170 .184 .299 .120 .131 .212
NC 40 41 46 38 39 44 33 34 39
Velocity 2020 2110 2685 1855 1935 2465 1565 1635 2080
Throw 78 60 43 75 58 41 69 53 38
1700
Pt .254 .277 .449 .214 .233 .378 .113 .166 .269
NC 44 45 50 42 43 48 36 37 42
REGISTERS
GRILLES &
MODELS 4100, 4200, 4300
One Front and One Rear Mullion
Size 20 x 20 24 x 24 28 x 24
CFM Deflection 0 22.5 45 0 22.5 45 0 22.5 45
INDUSTRIAL GRILLES
Throw 18 14 10
600
Pt .007 .008 .013
NC - - -
Throw 21 16 11
700
Pt .010 .011 .018
NC - - -
Throw 24 18 13
800
Pt .013 .014 .023
NC - - -
4100/4200/4300
Velocity 520 545 690 360 375 480
Throw 27 21 15 23 18 12
900
Pt .017 .018 .029 .008 .009 .014
NC - - - - - -
Velocity 580 605 770 400 415 530 340 355 455
Throw 31 24 17 25 19 14 23 18 13
1000
Pt .020 .022 .036 .009 .010 .017 .007 .008 .012
NC - - - - - - - - -
Velocity 1160 1210 1540 800 830 1060 680 710 910
Throw 61 47 33 51 39 28 46 36 26
2000
Pt .083 .091 .148 .039 .043 .070 .028 .031 .052
NC 23 24 29 20 21 26 - - -
Velocity 1740 1815 2310 1200 1250 1590 1020 1065 1365
Throw 92 70 50 76 58 42 69 54 39
3000
Pt .189 .205 .332 .089 .097 .158 .064 .070 .116
NC 35 36 41 32 33 38 28 29 34

REGISTERS
GRILLES &

MODELS 4100, 4200, 4300
Size 20 x 20 24 x 24 28 x 24
CFM Deflection 0 22.5 45 0 22.5 45 0 22.5 45
INDUSTRIAL GRILLES
Velocity 2030 2120 2695 1400 1460 1855 1190 1245 1590
Throw 108 83 59 89 68 49 80 63 45
3500
Pt .256 .280 .453 .122 .133 .214 .088 .096 .158
NC 40 41 46 36 37 41 32 33 38
Velocity 1600 1670 2120 1360 1420 1820
Throw 102 78 58 92 72 52
4000
Pt .159 .174 .280 .115 .125 .206
NC 41 42 47 36 37 42
Velocity 1800 1880 2390 1530 1600 2045
Throw 115 88 63 106 82 58
4500
Pt .210 .221 .356 .146 .159 .260
NC 44 45 50 40 41 46
4100/4200/4300
Velocity 2000 2085 2655 1700 1780 2265

Throw 127 97 69 115 90 65
5000
Pt .249 .271 .439 .180 .198 .319
NC 477 48 53 43 44 49
Velocity 1875 1960 2495
Throw 126 100 72
5500
Pt .219 .239 .388
NC 46 47 52
Velocity 2045 2135 2720
Throw 138 108 78
6000
Pt .260 .284 .461
NC 48 49 54
REGISTERS
GRILLES &
MODELS 4100, 4200, 4300
Size 36 x 24 38 x 24 48 x 20
CFM Deflection 0 22.5 45 0 22.5 45 0 22.5 45
INDUSTRIAL GRILLES
Velocity 530 550 700 500 520 655 485 510 645
Throw 41 31 22 40 31 22 39 30 21
2000
Pt .017 .019 .030 .015 .017 .027 .014 .016 .025
NC - - - - - - - - -
Velocity 795 825 1050 750 780 995 730 760 970
Throw 62 46 33 60 46 33 58 45 32
3000
Pt .039 .042 .068 .035 .038 .061 .033 .036 .056
NC - - - - - - - - -
Velocity 925 965 1225 875 915 1165 850 890 1130
Throw 72 54 38 70 54 38 68 52 36
3500
Pt .053 .058 .093 .047 .052 .048 .045 .049 .079
NC 24 25 30 20 21 26 - 20 25
4100/4200/4300
Velocity 1060 1100 1400 1000 1045 1330 970 1020 1290
Throw 82 62 44 80 62 44 78 60 42
4000
Pt .083 .075 .122 .062 .068 .110 .058 .064 .103
NC 28 29 34 25 26 31 24 25 30
Velocity 1195 1240 1575 1125 1175 1495 1095 1145 1450
Throw 92 70 50 90 69 49 87 67 48
4500
Pt .089 .095 .155 .078 .860 .139 .074 .082 .131
NC 31 32 37 28 29 34 27 28 33
Velocity 1320 1375 1755 1250 1305 1660 1215 1270 1615
Throw 102 78 56 100 77 55 97 75 53
5000
Pt .108 .117 .192 .097 .106 .172 .092 .100 .163
NC 34 35 40 31 32 37 30 31 36
Velocity 1455 1520 1930 1375 1435 1830 1340 1395 1175
Throw 112 86 61 110 84 60 106 82 58
5500
Pt .132 .144 .232 .117 .128 .208 .112 .121 .197
NC 37 38 43 34 35 40 33 34 39

REGISTERS
GRILLES &

MODELS 4100, 4200, 4300
Size 36 x 24 38 x 24 48 x 20
CFM Deflection 0 22.5 45 0 22.5 45 0 22.5 45
INDUSTRIAL GRILLES
Velocity 1585 1655 2110 1500 1565 1995 1460 1520 1940
Throw 124 92 66 120 92 66 116 90 64
6000
Pt .157 .171 .277 .140 .153 .248 .133 .144 .234
NC 40 41 46 37 38 43 36 37 42
Velocity 1720 1795 2285 1625 1700 2160 1580 1650 2100
Throw 135 103 74 130 100 71 126 97 69
6500
Pt .184 .201 .325 .165 .180 .290 .156 .170 .274
NC 43 44 49 39 40 45 38 39 44
Velocity 1850 1935 2460 1750 1830 2325 1700 1780 2260
Throw 145 111 79 140 108 76 136 104 75
7000
Pt .213 .233 .377 .191 .208 .337 .180 .198 .318
NC 45 46 51 41 42 47 40 41 46
4100/4200/4300
Velocity 1875 1960 2495 1825 1905 2420

Throw 150 116 82 146 112 79
7500
Pt .219 .239 .388 .207 .226 .365
NC 43 44 49 42 43 48
Velocity 2000 2090 2660 1945 2030 2585
Throw 160 124 88 156 120 84
8000
Pt .249 .272 .441 .236 .256 .416
NC 45 46 51 44 45 50
REGISTERS
GRILLES &
MODELS 4100, 4200, 4300
One Front and One Rear Mullion Three Front and One Rear Mullion
Size 48 x 24 72 x 20 72 x 24
CFM Deflection 0 22.5 45 0 22.5 45 0 22.5 45
INDUSTRIAL GRILLES
Velocity 405 420 535 315 325 415
Throw 37 28 20 32 24 17
2000
Pt .010 .011 .017 .006 .007 .010
NC - - - - - -
Velocity 605 630 805 470 490 625 390 405 515
Throw 55 42 30 48 36 25 43 33 23
3000
Pt .022 .024 .040 .013 .014 ..024 .009 .010 .016
NC - - - - - - - - -
Velocity 705 740 940 550 575 730 455 475 605
Throw 64 49 35 56 42 29 50 38 27
3500
Pt .030 .034 .055 .019 .020 .033 .012 .014 .022
NC - - 22 - - - - - -
4100/4200/4300
Velocity 810 840 1070 630 650 830 520 540 690
Throw 74 56 40 64 48 34 58 44 32
4000
Pt .040 .044 .071 .024 .026 .043 .017 .018 .029
NC 21 22 27 - - 24 - - 21
Velocity 910 950 1205 705 735 940 585 610 775
Throw 83 63 45 72 54 38 65 50 35
4500
Pt .052 .056 .090 .030 .033 .055 .021 .023 .037
NC 24 25 30 21 22 27 - - 24
Velocity 1010 1055 1340 785 820 1040 650 675 860
Throw 92 70 50 80 60 42 72 55 39
5000
Pt .063 .069 .112 .038 .042 .067 .026 .028 .046
NC 27 28 33 24 25 30 21 22 27
Velocity 1110 1160 1475 865 900 1145 715 745 950
Throw 100 77 55 88 66 46 79 60 42
5500
Pt .076 .083 .136 .046 .050 .082 .031 .034 .056
NC 30 31 36 27 28 33 24 25 30
Velocity 1210 1260 1610 940 980 1250 780 810 1030
Throw 111 84 60 96 72 51 86 66 46
6000
Pt .091 .098 .162 .055 .059 .097 .038 .040 .066
NC 33 34 39 30 31 36 27 28 33

REGISTERS
GRILLES &

MODELS 4100, 4200, 4300
One Front and One Rear Mullion Three Front and One Rear Mullion
Size 48 x 24 72 x 20 72 x 24
CFM Deflection 0 22.5 45 0 22.5 45 0 22.5 45
INDUSTRIAL GRILLES
Velocity 1315 1370 1745 1020 1065 1355 845 880 1120
Throw 119 91 65 104 78 55 93 71 50
6500
Pt .107 .117 .190 .064 .070 .114 .044 .048 .078
NC 35 36 41 32 33 38 29 30 35
Velocity 1410 1480 1880 1100 1150 1460 910 950 1210
Throw 128 98 70 112 84 60 100 76 54
7000
Pt .124 .137 .221 .075 .082 .133 .052 .056 .091
NC 37 38 43 34 35 40 31 32 37
Velocity 1515 1580 2010 1175 1230 1564 975 1015 1295
Throw 138 105 75 120 90 64 108 82 59
7500
Pt .143 .156 .251 .086 .094 .153 .059 .064 .104
NC 39 40 45 36 37 42 33 34 39
4100/4200/4300
Velocity 1620 1680 2140 1260 1310 1660 1040 1080 1380
Throw 148 112 80 128 96 68 116 88 64
8000
Pt .164 .176 .285 .098 .107 .172 .067 .072 .118
NC 41 42 47 38 39 44 35 36 41
Velocity 1335 1390 1770 1100 1150 1465
Throw 136 102 71 122 93 67
8500
Pt .111 .120 .195 .075 .082 .134
NC 40 41 46 37 38 43
Velocity 1410 1475 1880 1170 1220 1550
Throw 144 108 75 129 99 70
9000
Pt .124 .136 .221 .085 .092 .150
NC 42 43 48 39 40 45
Velocity 1490 1555 1980 1230 1285 1635
Throw 152 114 79 136 104 74
9500
Pt .138 .151 .244 .094 .102 .166
NC 44 45 50 41 42 47
Velocity 1570 1640 2080 1300 1350 1720
Throw 160 120 84 144 110 78
10000
Pt .154 .167 .269 .105 .113 .184
NC 46 47 52 43 44 49
REGISTERS
GRILLES &
MODELS 4100, 4200, 4300
Two Front and Two Rear Mullion
Size 44 x 44 48 x 48
CFM Deflection 0 22.5 45 0 22.5 45
Velocity 430 455 575 360 380 480
INDUSTRIAL GRILLES
Throw 50 38 27 46 35 25
3500
Pt .011 .012 .020 .008 .009 .014
NC - - - - - -
Velocity 495 515 655 415 430 550
Throw 58 44 32 53 41 29
4000
Pt .015 .016 .026 .010 .011 .019
NC - - - - - -
Velocity 555 580 740 465 485 620
Throw 65 50 35 60 46 33
4500
Pt .019 .020 .034 .013 .014 .023
NC - - 21 - - -
4100/4200/4300
Velocity 615 645 820 520 540 690
Throw 73 56 40 67 51 37
5000
Pt .023 .025 .042 .017 .018 .029
NC - - 24 - - 21
Velocity 680 710 900 570 595 755
Throw 79 61 43 73 56 40
5500
Pt .028 .031 .050 .020 .022 .035
NC 21 22 27 - - 24
Velocity 740 775 985 620 650 825
Throw 86 66 47 80 61 44
6000
Pt .034 .037 .060 .023 .026 .042
NC 24 25 30 21 22 27
Velocity 800 840 1065 670 700 895
Throw 93 71 50 86 66 47
6500
Pt .039 .044 .070 .027 .030 .049
NC 26 27 33 23 24 29
Velocity 860 900 1150 720 755 960
Throw 100 76 54 92 70 50
7000
Pt .046 .050 .082 .032 .035 .057
NC 28 29 34 25 26 31
Velocity 925 970 1230 775 810 1030
Throw 108 82 59 99 76 54
7500
Pt .053 .058 .094 .037 .040 .066
NC 30 31 36 27 28 33

REGISTERS
GRILLES &

MODELS 4100, 4200, 4300
Two Front and Two Rear Mullion
Size 44 x 44 48 x 48
CFM Deflection 0 22.5 45 0 22.5 45
Velocity 990 1030 1310 830 860 1100
INDUSTRIAL GRILLES
Throw 116 88 64 106 82 58

8000
Pt .061 .066 .107 .043 .046 .075
NC 32 33 38 29 30 35
Velocity 1050 1095 1395 885 915 1170
Throw 123 94 67 113 87 62
8500
Pt .068 .074 .121 .048 .052 .085
NC 34 35 40 31 32 37
Velocity 1110 1160 1480 930 970 1240
Throw 130 100 70 120 92 66
9000
Pt .076 .083 .137 .053 .058 .095
NC 36 37 42 33 34 39
4100/4200/4300
Velocity 1170 1225 1560 985 1025 1310

Throw 138 106 75 127 97 70
9500
Pt .085 .093 .152 .060 .065 .107
NC 38 39 44 35 36 41
Velocity 1230 1290 1640 1040 1080 1380
Throw 1466 112 80 134 102 74
10000
Pt .094 .103 .167 .007 .072 .118
NC 40 41 46 37 38 43
PERFORMANCE NOTES FOR SERIES 4100, 4200, 4300

DEFINITION OF UNITS
Throw Cataloged throw is horizontal distance in feet at the terminal velocity
of 150fpm with ambient supply air temperature
Throw calculations for 4100, 4200, and 4300

Vt (fpm) Terminal Velocity
Mult factor
To calculate throw distances at terminal velocities other than 150fpm multiply the appropriate factor by throw values
Throw Calculations for Multi-Core Units

2 Cores
1.25 x Single Core
Above corrections assume neck velocity is constant through each core with uniform velocity
REGISTERS
GRILLES &
MODEL RL
The RL series is designed to provide jet or diffused
air patterns in ceiling, sidewall and exposed duct
applications such as sports arenas and gymnasiums.
In sidewall and exposed duct installations, the RL can
INDUSTRIAL GRILLES
be mounted vertically or horizontally. The RL is ideal for vertical spot cooling or heating when
mounted in the ceiling or on the bottom of exposed ductwork. They are capable of supplying
straight flow primary air jet streams at 0 deflection for long throws, and a diffused pattern
of primary air at 15 and 30 deflections for short throws with greater spread. The cylindrical
drum enables primary air to be directed horizontally or vertically within a 60 arc. Because of
its extreme flexibility the adjustable louvers provide accurate directional control of primary air.
Available in sizes minimum 9" x 6" and maximum 70" x 15"
Individually adjustable deflection blades and rotating cylindrical drum assembly
Optional gang operator
Optional dual flow blades
RL

REGISTERS
GRILLES &
INDUSTRIAL GRILLES
Available Listed Heights 6 10 12 15

Available Listed Widths 9 12 18 24 30 36 48 60 20 25 30 35 40 50 60 70 20 25 30 35 40 50 60 70 15 20 25 30 40 50 60 70
Number of Louvers 2 3 5 7 9 11 15 19 3 4 5 6 7 9 11 13 3 4 5 6 7 9 11 12 2 3 4 5 7 9 11 13
A 1 3/4 2 5/8 3 3 1/2
B 4 3/8 6 1/8 6 1/8 8
C 3 1/2 5 7/8 6 1/4 9 1/2
D 3 5 5 5
E 8 1/2 12 1/4 13 7/8 16 7/8
F 7 10 13/16 12 1/2 15 1/2
RL
REGISTERS
GRILLES &
SERIES RL SPECIFICATIONS
HIGH CAPACITY SUPPLY EXTRUDED Performance Specification
ALUMINUM MODELS RL/RL-DF/RL-GO The manufacturer shall provide published performance
Air outlets shall be models RL/RL-DF/RL-GO manufactured data. Data shall be tested in accordance to ANSI/
by METALAIRE. Units shall be vertical deflection blades ASHRAE Standard 70-2006.
mounted in a cylindrical drum and of extruded aluminum
INDUSTRIAL GRILLES
construction. The cylindrical drum shall rotate on non- Paint Specification
metallic bushings and allow the discharge jet to be Process shall be anodic electro-deposition using an
directed vertically within a 60 arc. Rotating drum shall anodic acrylic paint. Units shall undergo pre-treatment
be sealed with felt gasketing. Deflector blades shall be including a pressurized spray stage using an alkaline
individually adjustable allowing the discharge jet to be cleaner and a de-ionized water rinse.
adjusted horizontally 60. The units shall be the size and
quantity as outlined in the plans and specifications.
Model RL-DF shall have split deflector blades along the
center of the horizontal plane. Top and bottom deflector
blades shall be individually adjustable.
Model RL-GO shall include a gang operator to permit
uniform adjustment of all deflector blades. Gang operator
RL
shall be accessible from the face of the outlet.
aluminum (Model DA).
RL MODEL NUMBER SPECIFICATIONS

RL ROTO LOUVER
Model Neck
RL Standard Blades 9 12 15 18 20 24 25 30 35 36 40 48 50 60 70
RL-DF Dual Flow Blades 6 X X X X X X X X X
Standard Blades with
RL-GO 10 X X X X X X X X
Gang Operator
12 X X X X X X X X
15 X X X X X X X X

Standard DA Aluminum Opposed Blade Damper
04 Clear Anodized
Optional
01 White
02 Satin Silver
03 Black
28 Custom Color

REGISTERS
GRILLES &
SERIES RL PERFORMANCE DATA

MODEL RL
Size 20 x 12 25 x 12 30 x 12
CFM Deflection 0 15 30 0 15 30 0 15 30
INDUSTRIAL GRILLES
Throw 12 10 8
400
Pt .020 .026 .036
NC - - -
Velocity 870 985 1155 690 780 935 575 675 800
Throw 17 14 12 16 14 11 15 13 10
600
Pt .047 .060 .083 .029 .038 .054 .020 .028 .039
NC - - - - - - - - -
Velocity 1160 1310 1540 920 1040 1250 770 900 1065
Throw 23 19 16 22 19 15 21 18 15
800
Pt .083 .107 .148 .053 .067 .097 .036 .050 .070
NC - 20 25 - - - - - -
Velocity 1450 1640 1925 1150 1300 1560 960 1125 1335
RL
Throw 29 25 20 28 24 20 27 23 19
1000
Pt .131 .167 .231 .082 .105 .152 .057 .078 .111
NC 23 27 32 - 21 26 - - -
Velocity 1740 1965 2305 1380 1560 1875 1155 1350 1600
Throw 35 30 24 33 28 23 32 27 22
1200
Pt .189 .241 .331 .118 .152 .219 .083 .113 .159
NC 28 32 37 22 26 31 - 21 26
Velocity 1610 1820 2185 1345 1575 1865
Throw 37 31 26 35 41 24
1400
Pt .162 .206 .298 .113 .155 .216
NC 27 31 36 22 26 31
Velocity 1840 2075 2500 1540 1795 2135
Throw 43 36 30 40 34 28
1600
Pt .211 .268 .389 .148 .201 .284
NC 31 35 40 26 30 35
Velocity 1730 2020 2400
Throw 46 39 32
1800
Pt .186 .254 .359
NC 29 33 38
Velocity 1925 2245 2665
Throw 50 42 35
2000
Pt .231 .314 .443
NC 32 36 41
REGISTERS
GRILLES &
MODEL RL
Size 35 x 12 40 x 12 50 x 12
CFM Deflection 0 15 30 0 15 30 0 15 30
Throw 14 12 10
INDUSTRIAL GRILLES
600
Pt .015 .019 .027
NC - - -
Velocity 660 755 890 580 650 785
Throw 20 17 14 19 16 13
800
Pt .027 .035 .049 .020 .026 .038
NC - - - - - -
Velocity 825 945 1110 725 815 980 580 655 805
Throw 26 22 18 23 19 16 21 18 15
1000
Pt .042 .055 .076 .032 .041 .059 .020 .026 .040
NC - - - - - - - - -
Velocity 990 1130 1335 870 975 1175 695 785 965
Throw 30 25 21 25 21 17 23 19 16
1200
RL
Pt .061 .079 .111 .047 .059 .086 .030 .038 .058
NC - - 22 - - - - - -
Velocity 1155 1320 1555 1015 1140 1370 810 915 1130
Throw 33 28 23 27 23 19 25 21 17
1400
Pt .083 .108 .151 .064 .081 .117 .040 .052 .079
NC - 22 27 - - 24 - - 22
Velocity 1320 1510 1775 1160 1300 1570 925 1045 1290
Throw 37 31 26 31 26 22 30 25 21
1600
Pt .108 .142 .197 .083 .105 .154 .053 .068 .103
NC 23 27 32 - 23 28 - - 23
Velocity 1485 1700 2000 1305 1465 1765 1040 1175 1450
Throw 44 37 31 40 34 28 38 32 27
1800
Pt .137 .180 .249 .106 .134 .194 .067 .086 .131
NC 26 30 35 22 26 31 - 21 26
Velocity 1650 1885 2220 1450 1625 1960 1155 1305 1610
Throw 48 41 34 45 38 31 41 35 29
2000
Pt .170 .221 .307 .131 .165 .239 .083 .106 .162
NC 29 33 38 25 29 34 20 24 29
Velocity 1860 2120 2500 1630 1830 2205 1300 1470 1815
Throw 54 46 38 50 42 35 46 39 32
2250
Pt .215 .280 .389 .166 .208 .303 .105 .135 .205
NC 32 36 41 29 33 38 24 28 33
Velocity 1810 2030 2450 1445 1635 2015
Throw 54 46 38 50 42 35
2500
Pt .204 .256 .374 .130 .166 .253
NC 32 36 41 27 31 36
Velocity 1735 1960 2420
Throw 60 51 42
3000
Pt .187 .239 .365
NC 32 36 41

REGISTERS
GRILLES &

MODEL RL
Size 60 x 12 70 x 12 15 x 15
CFM Deflection 0 15 30 0 15 30 0 15 30
Velocity 1250 1430 1665
Throw 21 18 15
1000
INDUSTRIAL GRILLES
Pt .097 .127 .173

NC 20 24 29
Velocity 575 640 765 580 645 775
Throw 21 18 15 22 19 15
1200
Pt .020 .025 .036 .020 .025 .037
NC - - - - - -
Velocity 1560 1785 2085
Throw 27 23 19
1250
Pt .152 .199 .271
NC 27 31 36
Velocity 675 745 890 660 735 885
Throw 23 19 16 26 22 18
1400
Pt .028 .034 .049 .027 .033 .048
NC - - - - - -
Velocity 1875 2140 2500
RL
Throw 32 27 22
1500
Pt .219 .285 .389
NC 32 36 41
Velocity 770 850 1020 745 830 995
Throw 28 24 20 35 30 24
1600
Pt .036 .045 .064 .034 .043 .061
NC - - - 21 - -
Velocity 885 955 1145 825 920 1105
Throw 37 31 26 37 31 26
1800
Pt .046 .057 .082 .042 .053 .076
NC - - - - - 20
Velocity 960 1065 1275 930 1035 1245
Throw 39 33 27 42 36 29
2000
Pt .057 .070 .101 .053 .067 .096
NC - - 24 - - 24
Velocity 1080 1195 1435 1035 1150 1380
Throw 44 37 31 46 39 32
2250
Pt .072 .089 .128 .067 .082 .118
NC - 23 28 - 22 27
Velocity 1200 1330 1590 1240 1380 1655
Throw 48 41 34 54 46 38
2500
Pt .089 .110 .158 .095 .118 .171
NC 22 26 31 23 27 32
Velocity 1440 1595 1910 1445 1610 1935
Throw 56 48 39 62 53 43
3000
Pt .129 .158 .227 .130 .162 .233
NC 27 31 36 28 32 37
Velocity 1680 1860 2230 1650 1845 2210
Throw 64 54 45 70 59 49
3500
Pt .176 .215 .310 .170 .212 .304
NC 32 36 41 32 36 41
Velocity 1925 2125 2545 1860 2075 2485
Throw 72 61 50 76 65 53
4000
Pt .231 .281 .404 .215 .268 .384
NC 36 40 45 35 39 44
REGISTERS
GRILLES &
MODEL RL
Size 20 x 15 25 x 15 30 x 15
CFM Deflection 0 15 30 0 15 30 0 15 30
Velocity 925 1085 1280 730 820 990 605 695 805
INDUSTRIAL GRILLES
Throw 20 17 14 19 16 13 18 15 13
1000
Pt .053 .073 .102 .033 .042 .061 .022 .030 .040
NC - - 22 - - - - - -
Velocity 1155 1360 1600 910 1025 1235 755 870 1010
Throw 26 22 18 0.24 20 17 22 19 15
1250
Pt .083 .115 .159 .052 .065 .095 .035 .047 .063
NC 20 24 29 - - 24 - - -
Velocity 1390 1630 1925 1095 1230 1485 910 1040 1210
Throw 31 26 22 29 25 20 27 23 19
1500
Pt .120 .166 .231 .074 .094 .137 .052 .067 .091
NC 25 29 34 20 24 29 - - 24
Velocity 1620 1900 2245 1275 1435 1730 1060 1215 1410
RL
Throw 36 31 25 34 29 24 31 26 22
1750
Pt .164 .225 .314 .101 .128 .186 .070 .092 .124
NC 30 34 39 25 29 34 - 23 28
Velocity 1850 2175 2565 1460 1640 1980 1210 1390 1610
Throw 42 36 29 39 33 27 36 31 25
2000
Pt .213 .295 .410 .133 .167 .244 .091 .120 .162
NC 34 38 43 29 33 28 24 28 33
Velocity 1640 1845 2225 1365 1560 1815
Throw 44 37 31 40 34 28
2250
Pt .167 .212 .308 .116 .152 .205
NC 32 36 41 27 31 36
Velocity 1825 2050 2475 1515 1735 2015
Throw 49 42 34 44 37 31
2500
Pt .207 .262 .382 .143 .187 .253
NC 35 39 44 30 34 39
Velocity 1820 2085 2420
Throw 53 45 37
3000
Pt .206 .271 .365
NC 36 40 45
Velocity 1970 2255 2620
Throw 58 49 41
3250
Pt .242 .317 .428
NC 38 42 47

REGISTERS
GRILLES &

MODEL RL
Size 40 x 15 50 x 15 60 x 15 70 x 15
CFM Deflection 0 15 30 0 15 30 0 15 30 0 15 30
Throw 25 21 17
INDUSTRIAL GRILLES
1500
Pt .029 .037 .054
NC - - -
Velocity 805 905 1095 650 730 860
Throw 29 25 20 27 23 19
1750
Pt .040 .051 .074 .026 .033 .046
NC - - - - - -
Velocity 920 1035 1250 745 835 985 625 705 845
Throw 33 28 23 31 26 22 29 25 20
2000
Pt .053 .067 .097 .034 .043 .060 .024 .030 .044
NC - 20 25 - - 20 - - -
Velocity 1035 1165 1405 835 935 1110 700 795 955 610 680 810
RL
Throw 37 31 26 35 30 24 33 28 23 32 27 22
2250
Pt .067 .084 .123 .043 .054 .076 .030 .039 .057 .023 .028 .040
NC 20 24 29 - - 23 - - - - - -
Velocity 1150 1295 1560 930 1040 1230 780 885 1060 680 755 900
Throw 41 35 29 39 33 27 37 31 26 36 31 25
2500
Pt .082 .104 .152 .053 .067 .094 .038 .048 .070 .028 .035 .050
NC 23 27 32 - 21 26 - - 22 - - -
Velocity 1380 1555 1875 1115 1250 1475 935 1060 1270 815 910 1080
Throw 49 42 34 46 39 32 44 37 31 43 36 30
3000
Pt .118 .151 .219 .077 .097 .136 .054 .070 .100 .041 .052 .072
NC 29 33 38 23 27 32 - 22 27 - - 24
Velocity 1495 1685 2030 1210 1355 1600 1010 1150 1375 885 985 1170
Throw 53 45 37 50 42 35 48 41 34 46 39 32
3250
Pt .139 .177 .256 .091 .114 .159 .063 .082 .117 .048 .060 .085
NC 31 35 40 25 29 34 21 25 30 - 21 26
Velocity 1610 1815 2185 1300 1460 1725 1090 1235 1485 950 1060 1260
Throw 57 48 40 54 46 38 52 44 36 50 42 35
3500
Pt .162 .205 .298 .105 .133 .185 .074 95.000 .137 .056 .070 .098
NC 33 37 42 27 31 36 23 27 32 - 23 28
Velocity 1845 2070 2500 1485 1665 1970 1245 1415 1695 1085 1210 1440
Throw 66 56 46 62 53 43 59 50 41 57 48 40
4000
Pt .212 .267 .389 .137 .173 .242 .096 .124 .179 .073 .091 .129
NC 37 41 46 31 35 40 27 31 36 23 27 32
Velocity 1870 2120 2540 1630 1820 2160
Throw 89 76 62 85 72 59
6000
Pt .218 .280 .402 .166 .206 .291
NC 39 43 48 35 39 44
REGISTERS
GRILLES &
PERFORMANCE NOTES FOR SERIES RL
DEFINITION OF UNITS
INDUSTRIAL GRILLES
Throw Cataloged throw is horizontal distance in feet at the terminal velocity of 150fpm with ambient supply air temperature
RL

REGISTERS
GRILLES &
SPECIALTY GRILLES
MODEL JA MODEL MPK
SPECIALTY GRILLES
MODEL MRD MODEL WFO
METALAIRE has a complete line of specialty grilles for applications that require non-standard
air distribution.
Steel/Aluminum Jet Aire High Capacity Nozzle

The Jet Aire high capacity industrial diffuser offers an economical solution
to air distribution applications requiring long throws. They are ideal for spot
heating or cooling in high traffic areas such as entrance ways and corridors.
JA Steel Single Unit
JA-AL Aluminum Single Unit
JA-EX Steel Single Unit for Exposed Duct
JA-AL-EX Aluminum Single Unit for Exposed Duct
JA-P Steel Panel Mounted
JA-AL-P Aluminum Panel Mounted
JA-LI Steel T-bar Lay-in Panel
JA-AL-LI Aluminum T-bar Lay-in Panel PAGE 226
REGISTERS
GRILLES &
Aluminum Punkah Louver
The Punkah Louver is designed for applications requiring a concentrated
column of air. The adjustable nozzle allows greater control of the air stream
for better air movement in poorly conditioned zones or dead air spaces.
MPK Aluminum Surface Mount
MPK-P Aluminum Panel Mounted
SPECIALTY GRILLES
MPK-6 Aluminum T-bar Lay-in Panel PAGE 236
Aluminum Round High Velocity Diffuser

The round high velocity diffusers combine superior performance and
architectural appeal. The adjustable blades are designed to form a
concentrated column of air or a widespread diffusion air pattern.
MRDD Aluminum Round Double Deflection Supply
MRDW Aluminum Round Double Deflection Wide Spacing Supply
MRSD Aluminum Round Single Deflection Supply
MREC Aluminum Round Egg Crate Return PAGE 240
Polymer Underfloor Diffuser
JA
The polymer underfloor diffuser offers the choice of horizontal or vertical air
patterns with its flip over design. The WFO is suitable for fitting into standard
floor tile with optional fittings for concrete slab.
WFO Polymer Raised floor installation
WFOAL Aluminum Face/Polymer Frame Raised floor installation
WFOS Polymer Slab floor installation
WFOV Polymer Raised floor installation Low pressure vertical supply
WFOI Polymer Raised floor installation High induction PAGE 245

REGISTERS
GRILLES &
MODEL JA
The JA series of Jet Aire Diffusers offers an economical solution
to high capacity air distribution applications requiring long throw
distances. It can be effectively applied to large space applications such
as civic centers, auditoriums, and arenas. The JA series is available in
SPECIALTY GRILLES
steel (JA) or aluminum (JA-AL) construction.

Available in surface mount or T-bar Lay-in applications
Panel mounting is available with 1-4 units
Available in even neck sizes 6-16

JA
Model X Element Diameter Rings Per Element Dia. D Duct Size Model X Element Diameter Rings Per Element Dia. D Duct Size P Panel Diameter
6 4 3 6 6 4 3 6 8
8 6 3 8 8 6 3 8 10
10 8 3 10 10 8 3 10 12
12 10 3 12 12 10 3 12 14
14 12 3 14 14 12 3 14 16
16 14 4 16 16 14 4 16 18
18 16 4 18 18 16 4 18 20
20 18 4 20 20 18 4 20 22
REGISTERS
GRILLES &
SPECIALTY GRILLES
JA
1 Jet (1 Panel) 2 Jets (1 Panel) 3 Jets (1 Panel) 4 Jets (1 Panel)
Available Element
Sizes Sizes A B Duct A B Duct A B Duct A B Duct
6 4 7 7/8 7 7/8 6x6 14 7/8 7 7/8 12 x 6 19 7/8 7 7/8 18 x 6 25 7/8 7 7/8 24 x 6
8 6 9 7/8 9 7/8 8x8 18 7/8 9 7/8 17 x 8 27 7/8 9 7/8 26 x 8 36 7/8 9 7/8 35 x 8
10 8 11 7/8 11 7/8 10 x 10 23 7/8 11 7/8 22 x 10 35 7/8 11 7/8 34 x 10 47 7/8 11 7/8 46 x 10
12 10 13 7/8 13 7/8 12 x 12 26 7/8 13 7/8 25 x 12 39 7/8 13 7/8 38 x 12 52 7/8 13 7/8 51 x 12
14 12 15 7/8 15 7/8 14 x 14 30 7/8 15 7/8 29 x 14 45 7/8 15 7/8 44 x 14 60 7/8 15 7/8 59 x 14
16 14 17 7/8 17 7/8 16 x 16 34 7/8 17 7/8 33 x 16 51 7/8 17 7/8 50 x 16 68 7/8 17 7/8 67 x 16
18 16 19 7/8 19 7/8 18 x 18 39 7/8 19 7/8 38 x 18 59 7/8 19 7/8 58 x 18 79 7/8 19 7/8 78 x 18
20 18 21 7/8 21 7/8 20 x 20 45 7/8 21 7/8 44 x 20 66 7/8 21 7/8 64 x 20 89 7/8 21 7/8 88 x 20

REGISTERS
GRILLES &
SPECIALTY GRILLES
JA
Model X Element Diameter Rings Per Element Dia. D Duct Size Model X Element Diameter Rings Per Element Dia. D Duct Size P Panel Diameter
6 4 3 6 6 4 3 6 8
8 6 3 8 8 6 3 8 10
10 8 3 10 10 8 3 10 12
12 10 3 12 12 10 3 12 14
14 12 3 14 14 12 3 14 16
16 14 4 16 16 14 4 16 18
18 16 4 18 18 16 4 18 20
20 18 4 20 20 18 4 20 22
Inches measured to the nearest 1/16 inch
REGISTERS
GRILLES &
SPECIALTY GRILLES
1 Jet (1 Panel) 2 Jets (1 Panel) 3 Jets (1 Panel) 4 Jets (1 Panel)
JA
Available Element
Sizes Sizes A B Duct A B Duct A B Duct A B Duct
6 4 7 7/8 7 7/8 6x6 14 7/8 7 7/8 12 x 6 19 7/8 7 7/8 18 x 6 25 7/8 7 7/8 24 x 6
8 6 9 7/8 9 7/8 8x8 18 7/8 9 7/8 17 x 8 27 7/8 9 7/8 26 x 8 36 7/8 9 7/8 35 x 8
10 8 11 7/8 11 7/8 10 x 10 23 7/8 11 7/8 22 x 10 35 7/8 11 7/8 34 x 10 47 7/8 11 7/8 46 x 10
12 10 13 7/8 13 7/8 12 x 12 26 7/8 13 7/8 25 x 12 39 7/8 13 7/8 38 x 12 52 7/8 13 7/8 51 x 12
14 12 15 7/8 15 7/8 14 x 14 30 7/8 15 7/8 29 x 14 45 7/8 15 7/8 44 x 14 60 7/8 15 7/8 59 x 14
16 14 17 7/8 17 7/8 16 x 16 34 7/8 17 7/8 33 x 16 51 7/8 17 7/8 50 x 16 68 7/8 17 7/8 67 x 16
18 16 19 7/8 19 7/8 18 x 18 39 7/8 19 7/8 38 x 18 59 7/8 19 7/8 58 x 18 79 7/8 19 7/8 78 x 18
20 18 21 7/8 21 7/8 20 x 20 45 7/8 21 7/8 44 x 20 66 7/8 21 7/8 64 x 20 89 7/8 21 7/8 88 x 20
JA-LI

REGISTERS
GRILLES &
SERIES JA SPECIFICATIONS
JET AIRE HIGH CAPACITY Performance Specification
STEEL/ALUMINUM The manufacturer shall provide published performance
MODELS JA/JA-AL/JA-EX/JA-AL-EX/ data. Data shall be tested in accordance to ANSI/
JA-P/JA-AL-P/JA-LI/JA-AL-LI ASHRAE Standard 70-2006.
Air outlets shall be model JA Jet*Aire by METALAIRE. Units
SPECIALTY GRILLES
shall be constructed of steel (JA) or aluminum (JA-AL). Paint Specification

The outlets shall consist of a core assembly constructed Degrease substrate w/bio-degradable solution. Apply
with a series of circular rings. powder coating by anodic electro-deposition to 1.5-6.0
The core shall be capable of adjustment from the face of mils, bake 12-13 minutes at 390 to a scratch/chip
the outlet without the use of special tools. The assembly resistant finish.
shall pivot on two nylon sleeved steel bolts. The core
assembly shall be adjustable to obtain a full 60 arc
along the vertical plane. The units shall be the size and
units shall be designed for surface mounting provided
with countersunk screw holes on the face of the device or
JA
JA MODEL NUMBER SPECIFICATION

JA-1, JA-1EX, JA-1P, JA-2P, JA-3P, JA-4P
Neck
Model 6 8 10 12 14 16 18 20 Available Finishes
JA-1 Steel Single Unit Surface Mount X X X X X X X X Standard
JA-AL-1 Aluminum Single Unit Surface Mount 01 White
JA-1EX Steel Single Unit for Exposed Duct Optional
JA-AL-1EX Aluminum Single Unit for Exposed Duct 02 Satin Silver
JA-1P Steel Single Unit Panel Mounted 03 Black
JA-AL-1P Aluminum Single Unit Panel Mounted 28 Custom Color
JA-2P Steel Two Units Panel Mounted
JA-AL-2P Aluminum Two Units Panel Mounted
JA-3P Steel Three Units Panel Mounted
JA-AL-3P Aluminum Three Units Panel Mounted
JA-4P Steel Four Units Panel Mounted
JA-AL-4P Aluminum Four Units Panel Mounted
Neck
JA-LI-6 Steel T-bar Lay-in Panel X X X X X X Standard
JA-AL-LI-6 Aluminum T-bar Lay-in Panel 01 White
Optional
02 Satin Silver
03 Black
28 Custom Color
REGISTERS
GRILLES &
SERIES JA PERFORMANCE
MODELS JA, JA-1P, JA-2P, JA-3P, JA-4P
Model Nozzle Velocity (fpm) 573 860 1147 1433 1720 2007 2294
JA-1EX-06 JA-AL-1EX-06 CFM 50 75 100 125 150 175 200
JA-06 JA-AL-06 Projection 4-8-13 6-12-16 8-13-19 10-15-21 12-16-23 13-18-25 13-19-27
JA-1P-06 JA-AL-1P-06 Total Pressure 0.036 0.081 0.144 0.225 0.324 0.441 0.576
SPECIALTY GRILLES
JA-LI-06 JA-LI-AL-06 NC <20 <20 <20 25 30 35 39
CFM 100 150 200 250 300 350 400
Projection 6-11-19 9-16-23 11-19-27 14-21-30 16-23-33 18-25-36 19-27-38
JA-2P-06 JA-AL-2P-06
Total Pressure 0.036 0.081 0.144 0.225 0.324 0.441 0.576
NC <20 <20 21 28 33 38 42
CFM 150 225 300 375 450 525 600
Projection 7-14-23 11-20-29 14-23-33 18-26-37 20-29-40 22-31-44 23-33-47
Total Pressure 0.036 0.081 0.144 0.225 0.324 0.441 0.576
NC <20 <20 23 30 35 40 44
CFM 200 300 400 500 600 700 800
Projection 8-16-27 12-23-33 16-27-38 20-30-43 23-33-47 25-36-50 27-38-54
JA
Total Pressure 0.036 0.081 0.144 0.225 0.324 0.441 0.576
NC <20 <20 24 31 36 41 45
JA-1EX-08 JA-AL-1EX-08 CFM 140 180 220 260 300 340 380
JA-LI-08 JA-LI-AL-08 NC <20 <20 21 26 30 34 38
CFM 280 360 440 520 600 680 760
Projection 11-21-32 14-26-36 17-28-40 20-31-43 23-33-47 25-35-50 26-37-53
Total Pressure 0.056 0.092 0.138 0.192 0.256 0.329 0.411
NC <20 <20 24 29 33 37 41
CFM 420 540 660 780 900 1020 1140
Projection 13-26-39 17-31-44 21-35-49 24-38-53 28-40-57 30-43-61 32-45-64
Total Pressure 0.056 0.092 0.138 0.192 0.256 0.329 0.411
NC <20 20 26 31 35 39 42
CFM 560 720 880 1040 1200 1360 1520
Projection 15-30-45 19-36-51 24-40-57 28-43-61 32-47-66 35-50-70 37-53-74
Total Pressure 0.056 0.092 0.138 0.192 0.256 0.329 0.411
NC <20 21 27 32 36 40 44

REGISTERS
GRILLES &
JA-1EX-10 JA-AL-1EX-10 CFM 200 250 300 350 400 450 500
SPECIALTY GRILLES
JA-LI-10 JA-LI-AL-10 NC <20 <20 <20 20 24 28 31

CFM 400 500 600 700 800 900 1000
Projection 11-23-38 14-29-43 17-33-47 20-36-50 23-38-54 26-40-57 29-43-60
Total Pressure 0.036 0.056 0.081 0.110 0.144 0.182 0.225
NC <20 <20 <20 23 27 31 34
CFM 600 750 900 1050 1200 1350 1500
Projection 14-28-47 18-35-52 21-40-57 25-44-62 28-47-66 32-49-70 35-52-74
Total Pressure 0.036 0.056 0.081 0.110 0.144 0.182 0.225
NC <20 <20 20 25 29 32 36
CFM 800 1000 1200 1400 1600 1800 2000
Projection 16-32-54 20-40-60 24-47-66 28-50-71 32-54-76 36-57-81 40-60-85
JA
Total Pressure 0.036 0.056 0.081 0.110 0.144 0.182 0.225
NC <20 <20 21 26 30 34 37
JA-1EX-12 JA-AL-1EX-12 CFM 300 400 500 600 700 800 900
JA-LI-12 JA-LI-AL-12 NC <20 <20 <20 25 30 34 37
CFM 600 800 1000 1200 1400 1600 1800
Projection 14-27-47 18-37-54 23-43-60 27-47-66 32-50-71 37-54-76 40-57-81
Total Pressure 0.033 0.059 0.092 0.133 0.181 0.236 0.299
NC <20 <20 22 28 32 37 40
CFM 900 1200 1500 1800 2100 2400 2700
Projection 17-34-57 22-45-66 28-52-74 34-57-81 39-62-87 45-66-93 49-70-99
Total Pressure 0.033 0.059 0.092 0.133 0.181 0.236 0.299
NC <20 <20 24 30 34 38 42
CFM 1200 1600 2000 2400 2800 3200 3600
Projection 19-39-66 26-52-76 32-60-85 39-66-93 45-71-101 52-76-108 57-81-114
Total Pressure 0.033 0.059 0.092 0.133 0.181 0.236 0.299
NC <20 20 25 31 35 40 43
REGISTERS
GRILLES &
JA-1EX-14 JA-AL-1EX-14 CFM 450 600 750 900 1050 1200 1350
SPECIALTY GRILLES
JA-LI-14 JA-LI-AL-14 NC <20 <20 22 28 32 39 40
CFM 900 1200 1500 1800 2100 2400 2700
Projection 17-34-57 23-46-66 29-52-74 34-57-81 40-62-87 46-66-93 49-70-99
Total Pressure 0.036 0.064 0.100 0.144 0.196 0.256 0.324
NC <20 <20 25 31 35 39 43
CFM 1350 1800 2250 2700 3150 3600 4050
Projection 21-42-70 28-56-81 35-64-90 42-70-99 49-76-107 56-81-114 61-86-121
Total Pressure 0.036 0.064 0.100 0.144 0.196 0.256 0.324
NC <20 21 27 32 37 41 45
CFM 1800 2400 3000 3600 4200 4800 5400
Projection 24-49-81 32-65-93 40-74-104 49-81-114 57-87-123 65-93-132 70-99-140
JA
Total Pressure 0.036 0.064 0.100 0.144 0.196 0.256 0.324
NC <20 22 28 34 38 42 46
JA-1EX-16 JJA-AL-1EX-16 CFM 600 800 1000 1200 1400 1600 1800
JA-LI-16 JA-LI-AL-16 NC <20 <20 23 28 33 37 41
CFM 1200 1600 2000 2400 2800 3200 3600
Projection 20-39-66 26-52-76 33-60-85 39-66-93 43-71-101 52-76-108 57-81-114
Total Pressure 0.035 0.061 0.096 0.138 0.188 0.246 0.311
NC <20 20 26 31 36 40 44
CFM 1800 2400 3000 3600 4200 4800 5400
Projection 24-48-81 32-64-93 40-74-104 48-81-114 56-87-123 64-93-132 70-99-140
Total Pressure 0.035 0.061 0.096 0.138 0.188 0.246 0.311
NC <20 22 28 33 38 42 45
CFM 2400 3200 4000 4800 5600 6400 7200
65-101- 74-108- 81-114-
Projection 28-55-93 37-74-108 46-85-120 55-93-132
JA-4P-16 JA-AL-4P-16 143 152 162
Total Pressure 0.035 0.061 0.096 0.138 0.188 0.246 0.311
NC <20 23 29 34 39 43 47

REGISTERS
GRILLES &
JA-1EX-18 JA-AL-1EX-18 CFM 750 1000 1250 1500 1750 2000 2250
SPECIALTY GRILLES
JA-LI-18 JA-LI-AL-18 NC <20 <20 23 28 33 37 40

CFM 1500 2000 2500 3000 3500 4000 4500
Projection 21-43-73 29-57-85 36-67-95 43-74-104 50-80-113 57-85-120 64-90-128
Total Pressure 0.032 0.056 0.088 0.127 0.172 0.225 0.285
NC <20 20 26 31 36 40 43
CFM 2250 3000 3750 4500 5250 6000 6750
70-104- 78-111-
Projection 26-53-90 35-74-104 44-82-117 53-90-128 61-98-138
JA-3P-18 JA-AL-3P-18 148 157
Total Pressure 0.032 0.056 0.088 0.127 0.172 0.225 0.285
NC <20 22 27 33 38 42 45
CFM 3000 4000 5000 6000 7000 8000 9000
JA
61-104- 71-113- 81-120- 90-128-

Projection 30-61-104 40-81-120 51-95-135
JA-4P-18 JA-AL-4P-18 148 159 170 181
Total Pressure 0.032 0.056 0.088 0.127 0.172 0.225 0.285
NC <20 23 29 34 39 43 46
JA-1EX-20 JA-AL-1EX-20 CFM 1000 1300 1600 1900 2200 2500 2800
JA-LI-20 JA-LI-AL-20 NC <20 <20 <20 29 34 38 41
CFM 2000 2600 3200 3800 4400 5000 5600
71-101-
Projection 25-51-85 33-66-97 41-76-108 48-83-117 56-89-126 64-95-135
JA-2P-20 JA-AL-2P-20 143
Total Pressure 0.035 0.059 0.090 0.127 0.170 0.219 0.275
NC <20 22 27 32 34 41 44
CFM 3000 3900 4800 5700 6600 7500 8400
59-102- 68-109- 78-117- 87-123-
Projection 31-62-104 40-81-119 50-93-132
JA-3P-20 JA-AL-3P-20 144 155 165 175
Total Pressure 0.035 0.059 0.090 0.127 0.170 0.219 0.275
NC <20 24 29 34 38 42 46
CFM 4000 5200 6400 7600 8800 10000 11200
57-108- 68-117- 79-126- 90-135- 101-143-
Projection 36-72-120 47-93-137
JA-4P-20 JA-AL-4P-20 152 166 179 190 202
Total Pressure 0.035 0.059 0.090 0.127 0.170 0.219 0.275
NC <20 25 30 35 40 44 47
REGISTERS
GRILLES &
CFM 1000 1300 1600 1900 2200 2500 2800
JA-1EX-22 JA-AL-1EX-22 Projection 16-33-60 21-42-69 26-52-76 31-59-83 36-63-89 41-67-95 46-71-101
JA-22 JA-AL-22 Total Pressure 0.025 0.042 0.064 0.090 0.120 0.160 0.200
SPECIALTY GRILLES
NC <20 <20 <20 23 26 28 31
CFM 1200 1600 2000 2400 2800 3200 3600
NC <20 <20 21 25 30 34 39
CFM 1500 2000 2500 3000 3500 4000 4500
NC <20 <20 22 27 32 37 42
JA
PERFORMANCE NOTES FOR SERIES JA
DEFINITION OF UNITS
Ps Static pressure = Pt-Pv (Inches of water column)

REGISTERS
GRILLES &
MODEL MPK
The MPK series is designed to discharge a high velocity jet that can
be directed to condition a specific space or area. It is constructed
of heavy duty aluminum and uses felt gasket that allows smooth
movement of the inner core for directing air flow and provides a
SPECIALTY GRILLES
tight seal to prevent air leakage.

Low sound levels and pressure drops
70 global rotation
360 rotation
Easy fingertip adjustment
Available in surface mount or T-bar Lay-in application

MPK
Size A B C D E F H No.of Mtg Holes

6 3 3 5/8 1 1/8 6 7 8 4 3/4 4
8 4 3/8 4 5/8 1 3/4 8 9 10 6 1/8 4
10 5 3/4 6 1/4 2 1/2 10 11 12 8 3/4 6
12 7 3/8 6 1/2 3 12 13 14 9 1/2 6
14 8 5/8 7 3/8 4 1/8 14 15 16 11 1/2 6
16 9 3/4 8 1/2 4 5/8 16 17 18 13 1/8 6
18 10 1/2 10 4 5/8 18 19 20 14 5/8 8
20 12 3/8 11 5 20 21 22 16 8
REGISTERS
GRILLES &
Tag: Engineer:
Project: Contractor:
Location: Architect:
Date: Submitted By:
Submittal No: MPK-6
Industrial High Capacity Punkah Louver
Aluminum - Global Adjustment
MODEL MPK-6 Punkah Louver T-Bar Panel Lay-In
SPECIALTY GRILLES
Optional
Aperture Damper
D - 1/8"
Flex Duct
23 3/4" Mounting Ring
C
2 1/2" H
3/8" B
11 7/8"
Optional Damper
Operator
11 7/8"
23 3/4"
MPK
Model A B C D H
MPK-6 06 3 3 3/8 2 1/2 06 5 7/8
MPK-6 08 4 3/8 4 9/16 2 1/2 08 7 1/16
MPK-6 10 5 3/4 5 13/16 2 9/16 10 8 3/8
MPK-6 12 7 3/8 6 5/16 2 11/16 12 9
MPK-6 14 8 5/8 7 7/16 3 13/16 14 11 1/4
MPK-6 16 9 3/4 8 9/16 4 7/16 16 13
MPK-6 18 10 1/2 9 13/16 3 15/16 18 13 3/4
MPK-6 18 12 3/8 11 3/16 4 9/16 20 15 3/4
1. Available Finishes 2. Accessories 3. Construction Details

Standard Finish D Aperture Damper Heavy Duty Aluminum
24 Mill Finish
Optional Finishes
Additional Charges
01 White
02 Satin Silver
03 Black
28 Special Color
MPK-6 REV B Date 10/19/10 Dimension Are In Inches Page 1 of 1

REGISTERS
GRILLES &
SERIES MPK SPECIFICATIONS

PUNKAH LOUVER ALUMINUM Performance Specification
MODELS MPK/MPK-P The manufacturer shall provide published performance
Air outlets shall be model MPK by METALAIRE. Units shall data. Data shall be tested in accordance to ANSI/
be composed of an adjustable inner round nozzle section ASHRAE Standard 70-2006.
and a round outer frame. The units shall be manually
SPECIALTY GRILLES
adjustable without the use of tools allowing the discharge Paint Specification
jet to be directed a full 70 degrees. Outlet shall be Process shall be anodic electro-deposition using an
constructed using a felt gasket seal providing smooth anodic acrylic paint. Units shall undergo pre-treatment
adjustment without leakage. Outer circular frame of unit including a pressurized spray stage using an alkaline
shall include a closed cell neoprene gasket to prevent cleaner and a de-ionized water rinse.
leakage between the outlet and mounting surface.
plans and specifications.
Optional aperture damper shall have an adjustment knob
constructed from aluminum. Connecting linkage, tension
springs, and damper hardware shall be constructed from
stainless steel.
MPK
MPK MODEL NUMBER SPECIFICATION

MPK PUNKAH LOUVER
Neck
MPK Aluminum Surface Mount X X X X X X X X Standard
MPK-2P Aluminum Two Units Panel Mounted X X X X 24 Mill
MPK-4P Aluminum Four Units Panel Mounted X X X X Optional
MPK-6 Aluminum T-bar Lay-in X X X X 01 White
02 Satin Silver
03 Black
04 Clear Anodize
28 Custom Color
REGISTERS
GRILLES &
SERIES MPK PERFORMANCE DATA
MODEL MPK
Size fpm 1000 1500 2000 2500 3000 3500 4000
CFM 49 74 96 123 147 172 196
Ps .050 .120 .220 .340 .490 .660 .860
6
NC <15 <15 15 21 25 29 33
SPECIALTY GRILLES
Throw 5-10-15 7-13-20 10-15-22 12-18-26 14-19-28 15-20-30 16-22-32
CFM 104 157 209 261 313 365 418
Ps .060 .140 .240 .380 .530 .700 .920
8
NC <15 <15 17 24 30 35 38
Throw 7-15-23 11-18-28 15-23-32 17-25-39 19-27-41 21-29-44 23-32-45
CFM 180 270 361 451 541 631 721
Ps .070 .150 .250 .390 .560 .740 .960
10
NC <15 <15 21 29 35 40 45
Throw 9-18-30 14-24-37 19-30-43 23-32-45 25-36-51 27-38-57 30-43-60
CFM 297 445 593 742 890 1038 1187
Ps .070 .150 .260 .400 .580 .780 1.010
MPK
12
NC <15 15 24 32 38 44 47
Throw 12-25-38 18-31-47 25-38-55 29-41-65 32-46-70 35-49-74 38-57-76
CFM 406 609 811 1014 1217 1420 1623
Ps .070 .150 .260 .410 .580 .790 1.020
14
NC <15 15 25 33 39 44 48
Throw 14-29-45 21-36-55 29-45-64 34-48-76 37-54-81 41-57-86 45-64-89
CFM 518 778 1036 1296 1555 1815 2074
Ps .070 .140 .260 .410 .580 .800 1.030
16
NC <15 16 26 33 39 44 49
Throw 16-30-43 19-35-50 23-43-60 27-46-72 34-52-76 39-56-82 42-62-87
CFM 601 902 1202 1503 1804 2105 2406
Ps .060 .130 .240 .370 .540 .740 .960
18
NC <15 16 26 33 39 44 49
Throw 18-33-47 24-37-53 26-43-66 32-50-73 26-54-80 40-60-85 45-66-93
CFM 835 1253 1670 2088 2506 2924 3341
Ps .060 .120 .220 .340 .490 .680 .510
20
NC <15 17 27 34 40 46 48
Throw 20-34-50 26-45-66 32-50-74 39-60-85 45-65-91 50-71-96 56-80-108
PERFORMANCE NOTES FOR SERIES MPK

DEFINITION OF UNITS

REGISTERS
GRILLES &
MODEL MRD
The MRD series is a round deflection supply or return grille with
exceptional architectural appeal. It combines the aesthetics of a
circular design with proven performance. The individually adjustable
blades on the supply are designed so they can be adjusted to form a
SPECIALTY GRILLES
column of air or a widespread diffusion pattern. The MRD is suitable

for applications requiring high velocity spot cooling or a dispersed airflow projection.
Adjustable vertical and horizontal blades
Long air throw
Wide dispersion patterns
METAL*AIRE
Wall or ceiling mount
Tag:
Concealed mounting system
Available in :single, (MRDS)MRD

Series or double deflection, (MRDD) Submittal No: MRD
Return model MREC has low air resistance and low sound levels
Industrial High Capacity Devices
Aluminum Construction - Round
Models: MRDS Single Deflection Grille- Wall or Ceiling Mount - Adjustable Air Pattern
Double Deflection Grille - Wall or Ceiling Mount - Adjustable Horizontal / Vertical Blades
MRD
MRDD
Model: MRDS - Single Deflection Grille

1
4
1 GASKET
2
Available
Sizes D F
1
F D- 8 6 6 8 1/4
Models: MRDS & MRDD
1
Available8 8 10 1/4
D F
Sizes
1
6
10 6
10
8-1/4
12 1/4
8 12 8 10-1/4
12 14 1/4
10 10 12-1/4
9
216 12 14 12 14
14-1/4 16 1/4
14 14 16-1/4
16 16 16 16
18-1/4 18 1/4
Number MRD
18 18 18 20-1/4
18 20 1/4
Model: MRDD - Double Deflection Grille 20 20 22-1/4
1 22 20 22 20
24-1/4 22 1/4
4 GASKET
1 24 24 26-1/4
2 22 22 24 1/4
1
1" Back Blade 24 24 26 1/4
Submittal
1
F D- 8
9
216
Notes: ( check if provided)

GR240 1. Available Finishes Metal Industries, Inc.
2. Available Accessories
For complete product specifications and submittal data, visit us at www.metalaire.com
3. Construction Details
Standard Finish: Damper. Heavy Gauge Aluminum Construction.
REGISTERS
GRILLES &
MRDW - Double Deflection Grille - Wide Blade Spacing
Available
Model Sizes D F
MRDW-08 8 8 10 1/4
MRDW-10 10 10 12 1/4
MRDW-12 12 12 14 1/4
SPECIALTY GRILLES
MRDW-14 14 14 16 1/4
MRDW-16 16 16 18 1/4
MRDW-18 18 18 20 1/4
MRDW-20 20 20 22 1/4
MRDW-22 22 22 24 1/4
MRDW-24 24 24 26 1/4
MRDW-30 30 30 32 1/4
MRD
MREC - Round CC5 Grille
Available
Model Sizes D F
MRDW-06 6 6 8 1/4
MRDW-08 8 8 10 1/4
MRDW-10 10 10 12 1/4
MRDW-12 12 12 14 1/4
MRDW-14 14 14 16 1/4
MRDW-16 16 16 18 1/4
MRDW-18 18 18 20 1/4
MRDW-20 20 20 22 1/4
MRDW-22 22 22 24 1/4
MRDW-24 24 24 26 1/4
MRDW-30 30 30 32 1/4
MREC dim data

REGISTERS
GRILLES &
SERIES MRD SPECIFICATIONS

ROUND SUPPLY/RETURN ALUMINUM Performance Specification
MODELS MRSD/MRDD/MRDW/MREC The manufacturer shall provide published performance
Air outlets shall be model MRSD/MRDD/MRDW/MREC data. Data shall be tested in accordance to ANSI/
by METALAIRE. Units shall be round single deflection ASHRAE Standard 70-2006.
(MRSD) or double deflection (MRDD/MRDW) supply with
SPECIALTY GRILLES
extruded aluminum blades on 1" spacing. Deflector Paint Specification

blades shall be individually adjustable. The return Process shall be anodic electro-deposition using an
(MREC) shall have a 1/2" x 1/2" aluminum egg crate anodic acrylic paint. Units shall undergo pre-treatment
core of heavy gauge aluminum. Units shall be designed including a pressurized spray stage using an alkaline
for concealed mounting and allow installation for both cleaner and a de-ionized water rinse.
hard and flexible ductwork. Units shall also include a
foam gasket to seal the border and mounting surface.
The units shall be the size and quantity as outlined in
the plans and specifications.
MRD MODEL NUMBER SPECIFICATION

MRD

MRDD Round Double Deflection 6 8 10 12 14 16 18 20 22 24 Standard
MRDW Round Double Deflection- Wide Spacing X X X X X X X X X X 01 White
MRSD Round Single Deflection Optional
MREC Round Egg Crate 02 Satin Silver
03 Black
24 Mill
28 Custom Color
REGISTERS
GRILLES &
SERIES MRD PERFORMANCE DATA
MODELS MRSD/MRDD/MRDW
fpm 400 600 800 1000 1200 1400 1600
Size Pv .010 .022 .040 .062 .090 .122 .160
CFM 79 118 157 196 236 275 314
Ps .021 .047 .073 .133 .185 .254 .322
SPECIALTY GRILLES
6
NC <15 <15 15 23 29 35 40
Throw 4-8-15 6-12-21 8-14-24 10-16-28 13-21-30 15-22-32 17-24-34
CFM 140 209 279 349 419 489 559
Ps .016 .038 .067 .105 .150 .205 .266
8
NC <15 <15 <15 21 27 33 38
Throw 5-10-20 8-16-27 11-21-32 14-25-36 17-28-39 20-30-41 21-32-45
CFM 218 327 436 545 655 764 873
Ps .014 .033 .059 .092 .131 .180 .234
10
NC <15 <15 <15 20 26 32 36
Throw 6-12-24 9-17-32 14-26-37 17-31-45 21-34-47 25-37-52 29-40-56
CFM 314 471 628 786 943 1100 1257
MRD
Ps .014 .031 .053 .085 .120 .165 .213
12
NC <15 <15 <15 19 25 31 35
Throw 7-15-30 12-24-40 16-33-47 20-37-53 25-41-59 29-45-65 33-48-74
CFM 428 641 855 1069 1283 1497 1711
Ps .013 .029 .050 .077 .114 .154 .201
14
NC <15 <15 <15 19 25 31 35
Throw 8-18-37 14-28-17 18-38-55 23-44-61 30-48-70 34-52-74 38-56-83
CFM 559 838 1117 1396 1676 1955 2234
Ps .013 .027 .048 .076 .108 .147 .191
16
NC <15 <15 <15 19 25 31 35
Throw 10-20-40 15-30-53 22-44-65 28-50-72 34-54-80 40-60-85 45-64-90
CFM 707 1060 1414 1767 2121 2474 2828
Ps .012 .027 .046 .072 .104 .142 .185
18
NC <15 <15 <15 20 26 32 36
Throw 11-22-44 18-36-61 25-50-72 31-57-80 40-63-89 45-67-95 50-71-101
CFM 873 1309 1746 2182 2618 3055 3491
Ps .012 .026 .045 .070 .101 .137 .177
20
NC <15 <15 <15 20 26 32 36
Throw 12-24-49 20-40-68 27-53-80 35-63-89 44-68-99 51-74-105 56-78-112
CFM 1056 1584 2112 2640 3168 3696 4224
Ps .011 .025 .043 .068 .097 .133 .173
22
NC <15 <15 <15 21 27 33 37
Throw 13-27-54 22-44-74 30-57-85 37-68-98 47-76-110 57-85-120 60-87-123
CFM 1257 1885 2514 3142 3770 4399 5027
Ps .011 .024 .042 .068 .096 .130 .170
24
NC <15 <15 15 22 29 34 38
Throw 14-29-60 24-48-81 33-66-95 41-75-106 50-84-116 58-88-124 66-95-130

REGISTERS
GRILLES &
SERIES MRD PERFORMANCE DATA

MODEL MREC
fpm 400 600 800 1000 1200 1400 1600
Size Pv .010 .022 .040 .062 .090 .122 .160
CFM 79 118 157 196 236 275 314
6 Ps .040 .091 .162 .255 .363 .500 .652
SPECIALTY GRILLES
NC <15 22 32 39 45 50 54
CFM 140 209 279 349 419 489 559
8 Ps .036 .080 .142 .223 .320 .432 .568
NC <15 22 31 38 44 49 53
CFM 218 327 436 545 655 764 873
10 Ps .033 .073 .130 .203 .293 .397 .522
NC <15 22 31 38 44 48 52
CFM 314 471 628 786 943 1100 1257
12 Ps .031 .070 .123 .194 .278 .384 .495
NC <15 22 32 38 45 49 53
CFM 428 641 855 1069 1283 1497 1711
MRD
14 Ps .030 .067 .119 .186 .267 .365 .475

NC <15 23 32 39 45 50 54
CFM 559 838 1117 1396 1676 1955 2234
16 Ps .029 .065 .116 .181 .260 .354 .465
NC <15 23 33 40 45 50 54
CFM 707 1060 1414 1767 2121 2474 2828
18 Ps .028 .064 .114 .177 .255 .346 .454
NC <15 23 33 40 45 50 54
CFM 873 1309 1746 2182 2618 3055 3491
20 Ps .028 .063 .111 .174 .250 .342 .446
NC <15 25 35 41 47 52 56
CFM 1056 1584 2112 2640 3168 3696 4224
22 Ps .027 .061 .110 .171 .246 .336 .439
NC <15 25 35 41 47 52 56
CFM 1257 1885 2514 3142 3770 4399 5027
24 Ps .027 .061 .108 .170 .244 .331 .435
NC <15 25 35 41 47 52 56
PERFORMANCE NOTES FOR SERIES MREC/MRD

DEFINITION OF UNITS
REGISTERS
GRILLES &
MODEL WFO
The WFO polymer Underfloor diffuser offers the choic of horizontal
or vertical air patterns with its flip over design. The WFO is
suitable for fitting into standard floor tile with optional fittings for
concrete slab. The disc is reversible for horizontal or vertical air
SPECIALTY GRILLES
throw. The diffuser has a memory peg feature to retain damper
setting once commissioned.
Polymer construction
Fire retardant material
Standard color RAL 7037 Mid Grey
Unique flip over design
Memory locating peg
Easy fit locking collar
Available in 8" only
WFO
Aircell Polymer Floor Diffusers - Pressurized Floor Void Aircell Polymer Floor Diffusers - Pressurized Void
Model WFO - Tile Installation Model WFOS - Slab Floor Installation Supplied with a steel adapter collar
Model WFOV - Low pressure vertical air pattern which is cast into the flor slab. The diffuser can then be
installed into the collar with concealed spring clips.

REGISTERS
GRILLES &
Vertical Diffusion at 5.4F Cooling Vertical Diffusion at 10.8F Cooling

300 300
250 250
SPECIALTY GRILLES
200 200
Air Velocity (fpm)
Air Velocity (fpm)
ft!
ft!
6
1.
6
1.
ft!
ft!
5
150 150
2.
5
2.
ft!
ft!
3
3
3.
3.
ft!
ft!
9
1
ft!
4.
ft!
4.
7
7
5.
5.
100 100
50 50
0 0
10 20 30 40 50 60 70 80 90 100 20 30 40 50 60 70 80 90 100
Flow Rate (cfm) Flow Rate (cfm)

WFO
Horizontal Diffusion at Isothermal

to 10.8F Cooling
110
100
90
80
Air Velocity (fpm)
70
ft!
6
4. ft !
1.
3. 5 ft
Tr=Ts (-5.4F)!
1 !
60
2.
ft!
3
ft!
9
4.
50
ft!
7
5.
40 Tr=Ts (-10.8F)!
30
20
10 20 30 40 50 60 70 80 90
Flow Rate (cfm)
REGISTERS
GRILLES &
WFO MODEL NUMBER SPECIFICATION
UNDERFLOOR DIFFUSER MODEL WFO
Model Neck Size Available Finishes
WFO Standard
WFOV 8 RAL 7037 Mid Gray
WFOD Optional
SPECIALTY GRILLES
Black
Min 500 Pieces
Set Up Charge
SERIES WFO PERFORMANCE DATA

MODEL WFO
PRESSURE LOSS DATA BOTH SETTINGS

Airflow Rate (cfm)
WFO
21 32 42 53 64 74 85 100 110 120
WFO 0.020 0.040 0.068 0.100 0.141 0.181 0.225 0.249 .0284
WFOS 0.020 0.040 0.068 0.108 0.153 0.201 0.227 0.263
WFOP 0.028 0.068 0.116 0.181 0.257 0.301
WFOD 0.016 0.028 0.048 0.076 0.104 0.141 0.181 0.196 0.224 0.251
= not recommended
All pressure loss data is based on a fully open damper.
ACOUSTIC DATA HORIZONTAL SETTING

Airflow Rate (cfm)
21 32 42 53 64 74 85 100 110 120
WFO < 15 < 15 19 24 29 31 34 40 44
WFOS < 15 15 21 26 30 32 37 43
WFOP < 15 18 25 30 35 39 44
WFOD < 15 < 15 < 15 20 24 26 30 35 39 42
= not recommended

REGISTERS
GRILLES &
SECURITY GRILLES
MAXIMUM SECURITY GRILLES MEDIUM SECURITY GRILLES SECURITY ACCESSORIES/OPTIONS
MODEL SGRP MODEL SGRH MODEL SGLFO
SECURITY GRILLES
MINIMUM SECURITY GRILLES BARRIER GRILLES

MODEL SG5500 MODEL SGDB
Security Grilles
METALAIRE offers a complete line of security grilles from minimum to maximum security.
METALAIRE security grilles are designed to provide efficient air distribution without jeopardizing
safety or security. Security grilles main application is correctional facilities, however, they are
also an excellent choice for schools, psychiatric hospitals, manufacturing plants or anywhere
that extra security is required.
Maximum Security Grilles

The maximum security grilles are designed for high security applications such
as prisoner cells and isolated areas in correctional institutions where there is
minimum or no supervision.
SGSP 2" Square holes Mesh face
SGRP 5/16" Round holes Perforated face
SGRP-SR 3/16" Round holes Perforated face PAGE 250
REGISTERS
GRILLES &
Medium Security Grilles
The medium security grilles are designed for high volume areas such as
dining and exercise areas in correctional institutions, manufacturing plants
and psychiatric hospitals.
SGRH Fixed louvered face return 14 gauge steel 0 or 40 deflection
SGWM Woven wire mesh 12 gauge steel 3/8" woven mesh

PAGE 276
SECURITY GRILLES
Minimum Security Grilles
The minimum security grilles are designed for minimum security areas in
correctional institutions, manufacturing plants and psychiatric hospitals. They
are also an excellent choice for public areas to resist vandalism.
SG5500S Louvered/Lattice face
SGRP-AL 5/16" Round holes Perforated face Aluminum
SGRP-SR-AL 3/16" Round holes Perforated face Aluminum
SG2000 Reinforced bar grille Aluminum
SGLF Lattice face PAGE 290
Barrier Grilles
The barrier grille is designed as a barrier for opening between secure and
non-secure areas. These grilles are for duct/wall mounted applications.
SGDB Duct bar welded in sleeve
SGDF Duct bar welded in flat mounting frame
SGDFF Duct bar welded in flanged mounting frame PAGE 325
Security Grille Options and Accessories

Security grilles have a large variety of options and accessories including face
only options, angles, anchors, security bars and dampers.
SGLFP Lattice face for SG5500S
SGLFO Lattice face only
SGRPO Perforated face only
OBD Opposed blade damper
SBR Security Bars
SAB Steel Anchor Bars
BSA Bolted Steel Angles
LSA Loose Steel Angles
WSA Welded Steel Angles
WAF Welded Angle Frame

PAGE 337
DS Debris Screen

REGISTERS
GRILLES &
MODEL SGSP
The SGSP maximum security sidewall/ceiling supply grille is
designed with a perforated face plate of 2" square holes
separated by 1" wide fret bars. A woven steel mesh screen
is inserted directly behind the face plate and is sandwiched
SECURITY GRILLES
by a steel backup plate for additional security.

3/16" steel face plate
10-gauge woven steel mesh screen
1/4" steel back up plate

Tag: Engineer:
Project:
Optional continuously welded seamsContractor:
Date: Submitted By:
Submittal SGSP
Maximum Steel Security Grille
Model SGSP Steel Maximum Security Grille Square Holes - Mesh Screen Back
Listed Size + 2"
Listed Size 2"
SGSP
Face View
3/16" Plate Sleeve
Stitch Welded
1"
= Sleeve Length
Minimum 4"
1/4" Backup Plate Stitch Welded Maximum 16"
1" 2" 1"

Listed Size + 2" 10 Gauge #2 Wire Mesh
3/16"
Plate Steel SAB SBR LSA
OBD Steel Anchor Bars Steel Security Bars Loose Steel Angle
1/2" Diameter 1/2" Diameter Bars LSA-2S 2 Angles Short Dimension
Steel
3" Long For Welded In Sleeve LSA-2L 2 Angles Long Dimension
Concrete , Block or Brick Walls 6" On Center Max LSA-4 4 Angles
Rear Operated
Horizontal & Vertical 1" X 1" X 3/16" Angle
With Mounting Holes
BSA WSA WAF

Bolted Steel Angles Welded Steel Angles Welded Steel Angle Frame
BSA-2S 2 Angles Short Dimension WSA-2S 2 Angles Short Dimension 1" X 1" X 3/16" Angle
BSA-2L 2 Angles Long Dimension WSA-2L 2 Angles Long Dimension Shipped Loose
BSA-4 4 Angles WSA-4 4 Angles Field Installed
1" X 1" X 3/16" Angles 1" X 1" X 3/16" Angle
Shipped Bolted To Sleeve Shipped Welded To Sleeve
1. Available Finishes 2. Options 3. Construction Details

Tag: Engineer:
REGISTERS
GRILLES &
Date: Submitted By:
Submittal SGSP-SS
Maximum Stainless Steel Security Grille
Model SGSP-SS Stainless Steel Maximum Security Grille Square Holes - Mesh Screen Back
Listed Size + 2"
Listed Size 2"
Face View
10 Gauge Sleeve
Stitch Welded
1"
= Sleeve Length
SECURITY GRILLES
10 Gauge Minimum 4"
Stitch Welded Maximum 16"
Backup Plate
1" 2" 1"

Listed Size + 2" 10 Gauge #2 Wire Mesh
10 Gauge
SSAB SBR-SS LSSA
OBDSS Stainless Steel Anchor Bars Stainless Steel Security Bars Loose Stainless Steel Angle
1/2" Diameter 1/2" Diameter Bars LSSA-2S 2 Angles Short
Stainless Steel
3" Long For Welded In Sleeve dimension LSSA-2L 2 Angles
Concrete , Block or Brick Walls 6" On Center Max Long Dimension LSSA-4 4
Rear Operated
Horizontal & Vertical Angles
1" X 1" X 3/16" Angle
SGSP
BSSA WSSA WAF-SS
Bolted Stainless Steel Angles Welded Stainless Steel Angles Welded Stainless Steel Angle Frame
BSSA-2S 2 Angles Short Dimension WSSA-2S 2 Angles Short Dimension 1" X 1" X 3/16" Angle
BSSA-2L 2 Angles Long Dimension WSSA-2L 2 Angles Long Dimension Shipped Loose
BSSA-4 4 Angles WSSA-4 4 Angles Field Installed

Standard Finish: OBDSS BSSA-2S 10 Gauge Stainless Steel Face & Sleeves
23 Satin Polished SSAB BSSA-2L 304SS Standard / 316SS Extra Charge Contact
Optional Finishes Extra Charge SBR-SS BSSA-4 Regional Sales Manager for availability and costs
01 White Painted LSSA-2S WSSA-2S OBDSS Can be face operated not recommended
02 Satin Silver Painted LSSA-2L WSSA-2L Seams can be continuously welded contact
03 Black Painted LSSA-4 WSSA-4 Regional Sales Manager for availability and costs
28 Special Color / Setup Charge WAF-SS 316 SS
SGSP-SS REV B Date 07/28/10 Dimension Are In Inches Page 1 of 1

REGISTERS
GRILLES &
SERIES SGSP SPECIFICATIONS

MAXIMUM SECURITY SQUARE HOLES Performance Specification
STEEL MODEL SGSP The manufacturer shall provide published performance
Air outlets shall be model SGSP manufactured by data. Data shall be tested in accordance to ANSI/
METALAIRE. Units shall be maximum security supply ASHRAE Standard 70-2006.
grilles of steel construction. Units shall have a face plate
Paint Specification
SECURITY GRILLES
constructed of 3/16" steel with 2" square holes and

1 fret bars. A 10 gauge woven steel mesh screen shall Process shall be anodic electro-deposition using an
be inserted directly behind the face panel sandwiched by anodic acrylic paint. Units shall undergo pre-treatment
a 1/4" steel backup plate. This assembly shall be backed including a pressurized spray stage using an alkaline
by a stitch welded 3/16" thick steel sleeve. Both face and cleaner and a de-ionized water rinse.
back-up plate shall be stitch welded to the sleeve. Units
shall include a 1" border.
steel (Model OBD).
Rear operation of the damper is recommended.
SGSP
REGISTERS
GRILLES &
SGSP MODEL NUMBER SPECIFICATIONS
MAXIMUM SECURITY 3/16" STEEL PERFORATED FACE WITH 2" SQUARE HOLES,
10 GAUGE WOVEN STEEL MESH SCREEN AND 1/4" STEEL BACKUP PLATE
SGSP 6 9 12 15 18 21 24 27 30 Sleeve Steel - Standard
SGSP - SS 6 X X X X X X X X X 01 White
SECURITY GRILLES
9 X X X X X X X X Steel - Optional
12 X X X X X X X 02 Satin Silver
15 X X X X X X 03 Black
18 X X X X X 4 - 16 28 Custom Color
21 X X X X Stainless Steel - Standard
24 X X X 23 Satin Polish
27 X X Stainless Steel - Optional
30 X 01 White Painted
02 Satin Silver Painted
03 Black Painted
28 Custom Color
SGSP
Available Accessories - Steel Available Accessories - Stainless Steel
OBD Steel Opposed Blade Damper OBD-SS Stainless Steel Opposed Blade Damper
SAB Steel Anchor Bars SAB-SS Stainless Steel Anchor Bars
SBR Steel Security Bars SBR-SS Stainless Steel Security Bars
LSA Loose Steel Angle LSA-SS Loose Stainless Steel Angle
BSA Bolted Steel Angle BSA-SS Bolted Stainless Steel Angle
WSA Welded Steel Angle WSA-SS Welded Stainless Steel Angle
WAF Welded Steel Angle Frame WAF-SS Welded Stainless Steel Angle Frame
316-SS 316 Stainless Steel

REGISTERS
GRILLES &
SERIES SGSP PERFORMANCE DATA

MODEL SGSP
CFM 6x6 9x6 12 x 6 15 x 6 18 x 6 21 x 6 24 x 6 9x9 12 x 9 NC
Nk Vel 100
25 Ps .008
Throw 4 -2
SECURITY GRILLES
Nk Vel 200 133 100

50 Ps .034 .015 .008
Throw 12-6 10-5 8-4
Nk Vel 300 200 150 120 100
75 Ps .076 .034 .019 .012 .008
Throw 17-8 14-7 13-6 12-6 11-5
Nk Vel 400 267 200 160 133 114 100 178 133
100 Ps .135 .060 .034 .022 .015 .011 .008 .027 .015
Throw 21-10 18-9 16-8 15-7 14-7 13-6 12-6 15-8 14-7
Nk Vel 400 300 240 200 171 150 267 200
20-25
150 Ps .135 .076 .049 .034 .025 .019 .060 .034
SGSP
Throw 23-12 21-11 20-10 19-9 18-9 17-8 21-10 19-9

Nk Vel 400 320 267 229 200 356 267
200 Ps .135 .087 .060 .044 .034 .107 .060
Throw 26-13 24-12 23-11 21-11 21-10 25-12 23-11
Nk Vel 500 400 333 286 250 444 333
250 Ps .211 .135 .094 .069 .053 .167 .094
Throw 30-15 28-14 26-13 25-12 24-12 27-14 26-13
Nk Vel 480 400 343 300 400
300 Ps .265 .184 .135 .104 .135
Throw 35-18 33-16 31-12 30-12 30-15
Nk Vel 467 400 350 467
350 Ps .241 .177 .135 .184
Throw 36-18 34-17 33-16 33-16
Nk Vel 457 400
400 Ps .224 .171
Throw 37-19 35-18
Nk Vel 450
25-30
450 Ps .211
Throw 38-19
Nk Vel 500
500 Ps .256
Throw 41-20
REGISTERS
GRILLES &
MODEL SGSP
CFM 15 x 9 18 x 9 21 x 9 24 x 9 12 x 12 15 x 12 18 x 12 21 x 12 24 x 12 NC
Nk Vel 107 100
100 Ps .010 .008
Throw 13-6 12-7
SECURITY GRILLES
Nk Vel 160 133 114 100 150 120 100
150 Ps .022 .015 .011 .008 .019 .012 .008
Throw 17-9 16-8 15-8 14-7 17-9 15-9 14-8
Nk Vel 213 178 152 133 200 160 133 114 100
200 Ps .038 .027 .020 .015 .034 .022 .015 .011 .008
Throw 21-10 20-10 19-9 18-9 21-11 19-10 18-10 17-9 16-9
Nk Vel 267 222 190 167 250 200 167 143 125
250 Ps .060 .042 .031 .023 .053 .034 .023 .017 .013
Throw 24-12 23-11 22-11 21-10 24-13 22-12 21-11 20-11 19-10
Nk Vel 320 267 229 200 300 240 200 171 150
300 Ps .087 .060 .044 .034 .076 .049 .034 .025 .019
SGSP
Throw 28-14 26-13 25-12 23-12 27-15 25-14 23-13 22-12 21-12
Nk Vel 373 311 267 233 350 280 233 200 175
20-25
350 Ps .118 .082 .060 .046 .104 .066 .046 .034 .026
Throw 31-15 29-14 27-14 26-13 30-16 28-15 26-14 25-14 24-13
Nk Vel 427 356 305 267 400 320 267 229 200
400 Ps .195 .135 .099 .076 .135 .087 .060 .044 .034
Throw 36-18 34-17 32-16 31-13 33-18 30-17 29-16 27-15 26-14
Nk Vel 480 400 343 300 450 360 300 257 225
450 Ps .241 .167 .123 .094 .211 .135 .094 .069 .053
Throw 39-19 37-18 35-17 33-17 38-21 35-19 33-18 31-71 30-17
Nk Vel 444 381 333 500 400 333 286 250
500 Ps .202 .148 .114 .256 .164 .114 .084 .064
Throw 39-20 37-19 35-18 41-22 38-21 35-19 34-18 32-18
Nk Vel 489 419 367 440 367 314 275
550 Ps .241 .177 .135 .195 .135 .099 .076
Throw 42-21 39-20 38-19 40-22 38-21 36-20 34-19
Nk Vel 457 400 480 400 343 300
600 Ps .207 .159 .229 .159 .117 .089
Throw 42-21 40-20 42-23 40-22 38-21 36-20
Nk Vel 495 433 433 371 325
650 Ps .241 .184 .184 .135 .104
Throw 44-22 42-21 42-23 40-22 38-21
Nk Vel 467 467 400 350
25-30
700 Ps .241 .211 .155 .119
Throw 44-22 44-24 42-23 40-22
Nk Vel 500 429 375
750 Ps .211 .155 .119
Throw 44-24 42-23 40-22

REGISTERS
GRILLES &

MODEL SGSP
Nk Vel 128 107
200 Ps .014 .010
Throw 18-9 16-8
SECURITY GRILLES
Nk Vel 144 120

250 Ps .018 .013
Throw 20-9 18-9
Nk Vel 160 133 114 100 133 114 100
300 Ps .022 .015 .011 .008 .015 .011 .008
Throw 21-10 19-10 18-9 17-9 21-10 19-10 19-9
Nk Vel 176 147 126 110 156 133 117
350 Ps .027 .019 .014 .010 .021 .016 .012
Throw 22-11 21-10 20-9 18-9 23-11 22-11 22-10
Nk Vel 192 160 137 120 178 152 133 131 114 100
400 Ps .031 .022 .016 .012 .027 .020 .015 .014 .011 .008
SGSP
Throw 23-12 22-11 21-10 20-10 25-12 24-12 23-11 22-11 21-11 21-10 20-25
Nk Vel 224 187 160 140 200 171 150 147 129 113
450 Ps .043 .030 .022 .017 .035 .026 .019 .019 .014 .011
Throw 25-13 24-12 24-11 22-11 27-13 25-13 24-12 24-12 23-12 22-11
Nk Vel 256 213 183 160 222 190 167 163 143 125
500 Ps .055 .038 .028 .022 .042 .031 .023 .023 .017 .013
Throw 28-14 26-13 25-13 24-12 29-14 27-14 26-13 26-13 25-12 24-12
Nk Vel 288 240 206 180 245 210 184 180 157 138
550 Ps .071 .049 .036 .028 .051 .038 .029 .028 .021 .016
Throw 30-15 28-14 27-12 26-13 26-15 29-13 28-14 28-14 26-13 26-12
Nk Vel 320 267 229 200 267 229 200 196 171 150
600 Ps .087 .060 .044 .034 .060 .044 .034 .032 .025 .019
Throw 33-16 31-15 29-15 28-14 33-16 31-16 30-15 29-15 28-14 27-13
Nk Vel 352 294 252 220 289 248 217 213 186 163
650 Ps .106 .074 .054 .042 .071 .052 .040 .038 .030 .023
Throw 35-17 33-16 31-16 30-13 35-17 33-16 32-15 31-15 29-15 29-14
REGISTERS
GRILLES &
MODEL SGSP
Nk Vel 384 320 274 240 311 267 233 229 200 175
700 Ps .125 .087 .064 .049 .082 .060 .046 .044 .034 .026
Throw 37-19 35-17 33-17 32-16 36-18 34-17 33-16 33-16 31-16 30-15
SECURITY GRILLES
Nk Vel 416 347 297 260 334 286 250 245 215 188
750 Ps .174 .121 .089 .068 .095 .070 .053 .051 .039 .030
Throw 43-21 38-19 37-19 36-17 38-19 36-18 34-17 34-17 32-16 31-15
Nk Vel 448 373 320 280 356 305 267 261 229 200
800 Ps .222 .154 .113 .087 .107 .079 .060 .058 .044 .034
Throw 45-23 42-21 40-20 38-19 40-20 38-19 36-18 36-18 34-17 33-16
Nk Vel 427 366 320 400 343 300 294 257 225
900 Ps .195 .143 .110 .167 .123 .094 .090 .069 .053
Throw 46-23 44-22 42-21 47-23 44-22 42-21 42-21 40-20 38-16 20-25
Nk Vel 480 411 360 444 381 333 327 286 250
1000 Ps .241 .177 .135 .241 .177 .135 .130 .099 .076
SGSP
Throw 50-25 47-23 45-22 53-26 50-25 48-24 47-24 45-23 43-22
Nk Vel 457 400 419 367 360 315 275
1100 Ps .254 .195 .209 .160 .154 .117 .090
Throw 43-27 51-25 54-26 51-25 49-25 47-24 46-23
Nk Vel 480 457 400 392 343 300
1200 Ps .229 .241 .184 .177 .135 .104
Throw 54-27 56-28 53-27 53-26 50-25 48-24
Nk Vel 467 457 400 350
1400 Ps .241 .231 .177 .135
Throw 58-29 58-29 55-28 53-26
Nk Vel 457 400
1600 Ps .224 .171
Throw 60-30 57-29
Nk Vel 450
25-30
1800 Ps .211
Throw 62-31
Nk Vel 500
2000 Ps .211
Throw 62-31
PERFORMANCE NOTES FOR SERIES SGSP

DEFINITION OF UNITS
Throw Throw distance in feet are for terminal velocities of 50 and 100fpm respectively

REGISTERS
GRILLES &
MODEL SGRP
The SGRP maximum security return grille is designed to create
an impenetrable barrier to the ductwork behind the grille. It is
constructed with a steel face welded to a steel sleeve.
3/16" steel perforated face
SECURITY GRILLES
5/16" holes on 7/16" staggered center
Optional continuously welded seams
Model SGRP Maximum Steel Security Grille Perforated Face
Face View
5/16" Holes
On 7/16" Centers
3/16" Plate Steel Sleeve Staggered
= Sleeve Length
SGRP
Face Plate Stitch Welded

Stitch Welded Minimum 4"
To Sleeve Maximum 16"
3/16" Plate Steel
OBD SAB SBR LSA

Steel Steel Anchor Bars Steel Security Bars Loose Steel Angle
Opposed Blade Damper 1/2" Diameter 1/2" Diameter Bars LSA-2S 2 Angles Short Dimension
Rear Operated 3" Long For Welded In Sleeve LSA-2L 2 Angles Long Dimension
With Mounting Holes
BSA WSA WAF

Tag: Engineer:
REGISTERS
GRILLES &
Date: Submitted By:
Submittal SGRP-SS
Maximum Stainless Steel Security Grille
Model SGRP-SS Stainless Steel Maximum Security Grille Perforated Face
Face View
5/16" Holes
On 7/16" Centers
10 Gauge Sleeve Staggered
Face Plate Stitch Welded = Sleeve Length
SECURITY GRILLES
10 Gauge Face Plate
OBDSS SSAB SBR-SS LSSA

Stainless Steel Stainless Steel Anchor Bars Stainless Steel Security Bars Loose Stainless Steel Angle
Opposed Blade Damper 1/2" Diameter 1/2" Diameter Bars LSSA-2S 2 Angles Short Dimension
Rear Operated 3" Long For Welded In Sleeve LSSA-2L 2 Angles Long Dimension
Concrete , Block or Brick Walls 6" On Center Max LSSA-4 4 Angles
With Mounting Holes
SGRP
BSSA WSSA WAF-SS
Bolted Stainless Steel Angles Welded Stainless Steel Angles Stainless Steel
BSSA-2S 2 Angles Short Dimension WSSA-2S 2 Angles Short Dimension Welded Angle Frame
BSSA-2L 2 Angles Long Dimension WSSA-2L 2 Angles Long Dimension 1" X 1" X 3/16" Angle
BSSA-4 4 Angles WSSA-4 4 Angles Shipped Loose
1" X 1" X 3/16" Angle 1" X 1" X 3/16" Angle Field Installed

Standard Finish: OBDSS BSSA-2S 10 Gauge Stainless Steel Face & Sleeves
23 Satin Polished Finish SSAB BSSA-2L 304SS Standard / 316SS Extra Charge Contact
01 White Paint LSSA-2S WSSA-2S OBD Can be face operated not recommended
02 Satin Silver Paint SLSA-2L WSSA-2L Seams can be continuously welded contact
03 Black Paint LSSA-4 WSSA-4 Regional Sales Manager for availability and costs
28 Special Color / Setup Charge WAF-SS 316 SS
SGRP-SS REV B Date 07/28/10 Dimension Are In Inches Page 1 of 1

REGISTERS
GRILLES &
SERIES SGRP SPECIFICATIONS

MAXIMUM SECURITY 5/16" HOLES Performance Specification
STEEL MODEL SGRP The manufacturer shall provide published performance
Air outlets shall be model SGRP manufactured by data. Data shall be tested in accordance to ANSI/
grilles of steel construction. Units shall have a
Paint Specification
SECURITY GRILLES
perforated face plate backed by a stitch welded

3/16" steel sleeve. Face plate shall be constructed Process shall be anodic electro-deposition using an
of 3/16" steel with 5/16" perforations on 7/16" staggered anodic acrylic paint. Units shall undergo pre-treatment
centers and shall be stitch welded to the sleeve. Units including a pressurized spray stage using an alkaline
shall include a 1" border. cleaner and a de-ionized water rinse.
steel (Model OBD).
SGRP
REGISTERS
GRILLES &
SGRP MODEL NUMBER SPECIFICATION
MAXIMUM SECURITY 5/16" PERFORATED FACE
WITH 7/16" STAGGERED CENTERS
Model Neck
SGRP 6 8 9 10 12 14 15 16 18 20 21 22 24 26 28 30 Sleeve
SGRP-SS 6 X X X X X X X X X X X X X X X X
SECURITY GRILLES
8 X X X X X X X X X X X X X X X
9 X X X X X X X X X X X X X X
10 X X X X X X X X X X X X X
4 - 16
18 X X X X X X X X
20 X X X X X X X
21 X X X X X X
22 X X X X X
SGRP
24 X X X X
26 X X X
28 X X
30 X
Available Finishes Available Accessories - Steel Available Accessories - Stainless Steel

Steel - Standard OBD Steel Opposed Blade Damper OBD-SS Stainless Steel Opposed Blade Damper
01 White SAB Steel Anchor Bars SAB-SS Stainless Steel Anchor Bars
Steel - Optional SBR Steel Security Bars SBR-SS Stainless Steel Security Bars
02 Satin Silver LSA Loose Steel Angle LSA-SS Loose Stainless Steel Angle
03 Black BSA Bolted Steel Angle BSA-SS Bolted Stainless Steel Angle
28 Custom Color WSA Welded Steel Angle WSA-SS Welded Stainless Steel Angle
Stainless Steel - Standard WAF Welded Steel Angle Frame WAF-SS Welded Stainless Steel Angle Frame
23 Satin Polish SH Optional Screw Holes In Face 316-SS 316 Stainless Steel
Stainless Steel - Optional
01 White Painted
03 Black Painted
28 Custom Color

REGISTERS
GRILLES &
SERIES SGRP PERFORMANCE DATA

MODEL SGRP
CFM 6x6 9x6 12 x 6 15 x 6 18 x 6 21 x 6 24 x 6 9x9 12 x 9 NC
Nk Vel 200 133 100
50 Ps .008 .003 .002
Throw 10-4 8-3 7-2
SECURITY GRILLES
Nk Vel 300 200 150 120 100 133 100

75 Ps .018 .008 .004 .003 .002 .003 .002
Throw 14-5 12-4 11-4 10-3 9-3 10-4 9-3
Nk Vel 400 267 200 160 133 114 178 133
100 Ps .031 .014 .008 .005 .003 .003 .006 .003
Throw 17-6 15-5 13-5 12-4 11-4 11-4 13-4 11-4
Nk Vel 500 333 250 200 167 143 125 222 167
125 Ps .049 .022 .012 .008 .005 .004 .003 .010 .005
Throw 20-7 17-6 16-5 15-5 14-5 13-5 12-4 15-5 14-5
Nk Vel 400 300 240 200 171 150 267 200
150 Ps .031 .018 .011 .008 .006 .004 .014 .008
SGRP
Throw 20-7 18-6 16-6 15-5 15-5 14-5 17-6 15-5 20-25
Nk Vel 350 280 234 200 175 311 233
175 Ps .025 .016 .011 .008 .006 .019 .011
Throw 20-7 18-6 17-6 16-5 15-5 19-7 17-6
Nk Vel 400 320 267 229 200 356 267
200 Ps .031 .020 .014 .010 .008 .025 .014
Throw 22-8 20-7 19-7 18-6 17-6 21-7 19-7
Nk Vel 500 400 333 286 250 444 333
250 Ps .049 .031 .022 .016 .012 .055 .031
Throw 25-9 23-8 22-8 21-7 20-7 27-10 25-9
Nk Vel 480 400 343 300 400
300 Ps .061 .042 .031 .018 .042
Throw 29-10 27-10 26-7 22-8 27-10
Nk Vel 467 400 350 467
350 Ps .055 .041 .024 .055
Throw 30-11 29-10 25-9 30-11
Nk Vel 457 400
400 Ps .051 .031
Throw 31-11 27-10
Nk Vel 450
25-30
450 Ps .049
Throw 32-10
Nk Vel 500
500 Ps .059
Throw 34-12
REGISTERS
GRILLES &
MODEL SGRP
CFM 15 x 9 18 x 9 21 x 9 24 x 9 12 x 12 15 x 12 18 x 12 21 x 12 24 x 12 NC
Nk Vel 107 100
100 Ps .002 .002
Throw 10-4 10-4
SECURITY GRILLES
Nk Vel 133 111 125 100
125 Ps .003 .002 .003 .002
Throw 13-4 12-4 12-4 11-4
Nk Vel 160 133 114 100 150 120 100
150 Ps .005 .003 .003 .002 .004 .003 .002
Throw 14-5 13-5 13-4 12-4 14-5 13-5 12-4
Nk Vel 187 156 133 117 175 140 117 100
175 Ps .007 .005 .003 .003 .006 .004 .003 .002
Throw 16-6 15-5 14-5 14-5 16-5 14-5 14-5 13-4
Nk Vel 213 178 152 133 200 160 133 114 100
200 Ps .009 .006 .005 .003 .008 .005 .003 .003 .002
SGRP
Throw 17-6 16-6 16-5 15-5 18-6 16-6 15-5 14-5 13-5 20-25
Nk Vel 267 222 190 167 250 200 167 143 125
250 Ps .020 .014 .010 .008 .012 .008 .005 .004 .003
Throw 23-8 22-8 20-7 20-5 20-7 18-6 17-6 16-6 16-5
Nk Vel 320 267 229 200 300 240 200 171 150
300 Ps .027 .019 .014 .011 .018 .011 .008 .006 .004
Throw 25-9 24-8 23-8 22-8 22-8 21-7 20-7 19-7 18-6
Nk Vel 373 320 267 233 350 280 233 200 175
350 Ps .035 .027 .018 .014 .031 .020 .014 .110 .008
Throw 28-10 25-9 25-9 24-8 27-10 25-9 24-8 23-8 22-8
Nk Vel 427 373 305 267 400 320 267 229 200
400 Ps .045 .035 .023 .018 .039 .025 .018 .013 .010
Throw 30-11 28-10 27-9 26-9 30-10 27-10 26-9 24-9 23-8
Nk Vel 480 400 343 300 450 360 300 257 225
450 Ps .055 .038 .028 .022 .049 .031 .022 .016 .012
Throw 32-11 31-11 29-10 28-10 32-11 29-10 28-10 26-9 25-9
Nk Vel 444 381 333 500 400 333 286 250
500 Ps .047 .034 .026 .059 .038 .026 .019 .015
Throw 33-11 31-11 30-10 34-12 31-11 30-10 28-10 27-9
Nk Vel 489 419 367 440 367 314 275
25-30
550 Ps .047 .034 .026 .045 .031 .023 .018
Throw 33-11 31-11 30-10 33-12 31-11 30-10 28-10
Nk Vel 457 400 480 400 343 300
600 Ps .048 .037 .053 .037 .027 .021
Throw 35-12 33-12 35-12 33-12 31-11 30-10

REGISTERS
GRILLES &

MODEL SGRP
CFM 21 x 9 24 x 9 12 x 12 15 x 12 18 x 12 21 x 12 24 x 12 NC
Nk Vel 495 433 433 371 325
650 Ps .050 .042 .037 .027 .021
Throw 37-13 35-12 33-12 31-11 30-10
SECURITY GRILLES
Nk Vel 467 467 400 350

700 Ps .049 .042 .031 .024
Throw 37-13 35-12 33-12 32-11
Nk Vel 500 500 429 375
20-25
750 Ps .055 .049 .036 .027
Throw 38-13 37-13 35-12 33-12
Nk Vel 457 400
800 Ps .041 .031
Throw 36-13 35-12
Nk Vel 486 425
850 Ps .046 .035
SGRP
Throw 38-13 36-13

Nk Vel 450
900 Ps .044
Throw 39-14
Nk Vel 475
25-30
950 Ps .049
Throw 40-14
Nk Vel 500
1000 Ps .054
Throw 42-15
REGISTERS
GRILLES &
MODEL SGRP
Nk Vel 128 107
200 Ps .003 .002
Throw 15-5 14-5
SECURITY GRILLES
Nk Vel 160 134
250 Ps .005 .004
Throw 17-6 15-5
Nk Vel 192 160 137 120 133 114 100
300 Ps .007 .005 .004 .003 .003 .003 .002
Throw 19-7 18-6 17-6 16-6 17-6 16-6 15-5
Nk Vel 224 187 160 140 156 133 117
350 Ps .010 .007 .006 .004 .005 .004 .003
Throw 21-7 20-7 19-6 18-6 19-6 19-6 17-6
Nk Vel 256 213 183 160 178 152 133 131 114 100
400 Ps .013 .009 .007 .005 .006 .005 .003 .003 .003 .002
SGRP
Throw 23-8 22-8 21-7 20-7 21-7 20-7 19-7 19-7 18-6 17-6 20-25
Nk Vel 288 240 206 180 200 171 150 147 129 113
450 Ps .017 .012 .009 .007 .008 .006 .004 .004 .004 .003
Throw 25-9 24-8 22-8 21-7 23-7 21-7 20-7 21-7 19-6 19-6
Nk Vel 320 267 229 200 222 190 167 163 143 125
500 Ps .020 .014 .010 .008 .010 .007 .005 .005 .004 .003
Throw 28-10 26-9 24-9 23-8 24-8 23-8 22-8 22-8 21-7 20-7
Nk Vel 352 294 252 220 245 210 184 180 157 138
550 Ps .025 .017 .013 .010 .012 .009 .007 .006 .005 .004
Throw 29-10 27-9 26-9 24-8 25-9 25-8 24-9 23-8 22-7 21-7
Nk Vel 384 320 274 240 267 229 200 196 171 150
600 Ps .029 .020 .015 .011 .014 .010 .008 .007 .006 .004
Throw 31-11 29-10 28-10 26-9 27-10 26-9 25-9 25-9 23-8 22-8
Nk Vel 416 347 297 260 289 248 217 213 186 163
650 Ps .034 .024 .018 .013 .017 .012 .010 .009 .007 .005
Throw 33-11 31-10 29-10 27-9 28-10 27-9 26-9 26-9 24-9 23-8
Nk Vel 448 373 320 280 311 267 233 229 200 175
700 Ps .039 .027 .020 .015 .019 .014 .011 .010 .008 .006
Throw 34-12 32-11 31-11 29-10 30-11 29-10 27-10 27-10 26-9 25-9
Nk Vel 400 343 300 334 286 250 245 215 188
25-30
750 Ps .036 .027 .020 .022 .016 .013 .012 .009 .007
Throw 36-12 34-12 33-11 31-11 30-10 28-10 28-10 27-9 26-9
Nk Vel 427 366 320 356 305 267 261 229 200
800 Ps .045 .033 .025 .025 .018 .014 .013 .010 .008
Throw 38-13 36-13 35-12 33-12 32-11 30-11 30-10 29-10 27-10

REGISTERS
GRILLES &

MODEL SGRP
CFM 18 x 15 21 x 15 24 x 15 18 x 18 21 x 18 24 x 18 21 x 21 24 x 21 24 x 24 NC
Nk Vel 454 389 340 378 324 299 278 243 213
850 Ps .050 .037 .028 .032 .023 .018 .017 .013 .010
Throw 39-13 37-13 36-12 37-13 35-12 33-11 33-11 31-11 30-10
SECURITY GRILLES
Nk Vel 480 411 360 400 343 330 294 257 225
900 Ps .055 .041 .031 .038 .028 .022 .021 .016 .012
Throw 41-14 39-14 37-13 39-14 37-13 35-12 35-12 33-12 32-10
Nk Vel 380 422 362 332 311 272 238
950 Ps .035 .047 .035 .027 .026 .020 .015
Throw 39-13 41-14 39-14 37-13 37-13 32-11 34-11
Nk Vel 457 400 444 381 333 327 286 250
20-25
1000 Ps .049 .038 .055 .041 .031 .030 .023 .018
Throw 42-15 40-14 44-15 42-15 40-14 40-14 38-13 36-13
Nk Vel 440 419 367 360 315 275
1100 Ps .045 .048 .037 .036 .027 .021
SGRP
Throw 42-15 44-15 42-15 42-14 40-14 38-13

Nk Vel 480 457 400 392 343 300
1200 Ps .053 .055 .042 .041 .031 .024
Throw 45-16 46-16 44-16 44-15 42-15 40-14
Nk Vel 467 457 400 350
1400 Ps .055 .053 .041 .031
Throw 49-17 48-17 46-16 44-15
Nk Vel 457 400
1600 Ps .051 .039
Throw 50-17 48-17
Nk Vel 450
25-30
1800 Ps .049
Throw 51-18
Nk Vel 500
2000 Ps .049
Throw 51-1*8
PERFORMANCE NOTES FOR SERIES SGRP

DEFINITION OF UNITS
REGISTERS
GRILLES &
MODEL SGRP-SR
The SGRP-SR maximum security grille is designed as a suicide
deterrent. The small holes inhibit threading objects through the face. It
also creates an impenetrable barrier to the ductwork behind the grille.
The SGRP-SR is constructed with a steel face welded to a steel sleeve.
SECURITY GRILLES
10-gauge steel perforated face
3/16" holes on 9/32" staggered center
Optional
Tag:stainless steel construction Engineer:
Project:continuously welded seams Contractor:
Optional
Date: Submitted By:
Submittal SGRP-SR
Steel Maximum Security Grille
Model SGRP-SR Steel Suicide Deterrent Maximum Security Grille Perforated Face
Listed Size Face View

3/16" Holes
10 Gauge Sleeve On 9/32" Centers
SGRP-SR
Stitch Welded = Sleeve Length Staggered
Face Plate
1" 10 Gauge Face

Listed Size + 2"
OBD SAB SBR LSA

With Mounting Holes
BSA WSA WAF

1" X 1" X 3/16" Angle 1" X 1" X 3/16" Angle

Standard Finish: OBD BSA-2S 10 Gauge Steel Face & Sleeves
01 White
SAB BSA-2L OBD Can be face operated not recommended GR267
Optional Finishes Extra Charge SBR BSA-4 Seams can be continuously welded contact
02 Satin Silver LSA-2S WSA-2S Regional Sales Manager for availability and costs
REGISTERS Tag: Engineer:
GRILLES &
Date: Submitted By:
Submittal SGRP-SR-SS
Stainless Steel Maximum Security Grille
Model SGRP-SR-SS Stainless Steel Suicide Deterrent Maximum Security Grille Perforated Face
Face View
3/16" Holes
On 9/32" Centers
Staggered
Face Plate = Sleeve Length
SECURITY GRILLES
10 Gauge Face Plate
OBDSS SSAB SBR-SS LSSA

Stainless Steel Stainless Steel Anchor Bars Stainless Steel Security Bars Loose Stainless Steel Angle
Opposed Blade Damper 1/2" Diameter 1/2" Diameter Bars LSSA-2S 2 Angles Short Dimension
Rear Operated 3" Long For Welded In Sleeve LSSA-2L 2 Angles Long Dimension
Concrete , Block or Brick Walls 6" On Center Max LSSA-4 4 Angles
With Mounting Holes
SGRP-SR
BSSA WSSA WAF-SS

Bolted Stainless Steel Angles Welded Stainless Steel Angles Stainless Steel
BSSA-2S 2 Angles Short Dimension WSSA-2S 2 Angles Short Dimension Welded Angle Frame
BSSA-2L 2 Angles Long Dimension WSSA-2L 2 Angles Long Dimension 1" X 1" X 3/16" Angle
BSSA-4 4 Angles WSSA-4 4 Angles Shipped Loose
1" X 1" X 3/16" Angle 1" X 1" X 3/16" Angle Field Installed

Standard Finish: OBD BSSA-2S 10 Gauge Stainless Steel Face & Sleeves
23 Satin Polished Finish SSAB BSSA-2L 304SS Standard / 316SS Extra Charge Contact
01 White Paint LSSA-2S WSSA-2S OBDSS Can be face operated not recommended
02 Satin Silver Paint SLSA-2L WSSA-2L Seams can be continuously welded contact
03 Black Paint LSSA-4 WSSA-4 Regional Sales Manager for availability and costs
28 Special Color / Setup Charge WAF-SS
SGRP-SR-SS REV B Date 07/28/10 Dimension Are In Inches Page 1 of 1
REGISTERS
GRILLES &
SERIES SGRP-SR SPECIFICATIONS
MAXIMUM SECURITY 3/16" HOLES Performance Specification
STEEL MODEL SGRP-SR The manufacturer shall provide published performance
Air outlets shall be model SGRP-SR manufactured by data. Data shall be tested in accordance to ANSI/
grilles of steel construction. Units shall have a perforated
Paint Specification
SECURITY GRILLES
face plate backed by a stitch welded steel sleeve. Face
plate shall be constructed of 10 gauge steel with 3/16" Process shall be anodic electro-deposition using an
perforations on 9/32" staggered centers and shall be anodic acrylic paint. Units shall undergo pre-treatment
stitch welded to the 10 gauge sleeve. Units shall include including a pressurized spray stage using an alkaline
a 1" border. cleaner and a de-ionized water rinse.
steel (Model OBD).
SGRP-SR

REGISTERS
GRILLES &
SGRP-SR MODEL NUMBER SPECIFICATION

MAXIMUM SECURITY 3/16" PERFORATED FACE
Model Neck
SGRP-SR 6 8 9 10 12 14 15 16 18 20 21 22 24 26 28 30 Sleeve
SGRP-SR-SS 6 X X X X X X X X X X X X X X X X
SECURITY GRILLES
4 - 16
18 X X X X X X X X
20 X X X X X X X
21 X X X X X X
22 X X X X X
SGRP-SR
24 X X X X
26 X X X
28 X X
30 X
Finishes Accessories - Steel Accessories - Stainless Steel

23 Satin Polish 316-SS 316 Stainless Steel
01 White Painted
03 Black Painted
28 Custom Color
REGISTERS
GRILLES &
SERIES SGRP-SR PERFORMANCE DATA
MODEL SGRP-SR
CFM 6x6 9x6 12 x 6 15 x 6 18 x 6 21 x 6 24 x 6 9x9 12 x 9 NC
Nk Vel 200 133 100
50 Ps .008 .003 .002
Throw 10-4 8-3 7-2
SECURITY GRILLES
Nk Vel 300 200 150 120 100 133 100
75 Ps .018 .008 .004 .003 .002 .003 .002
Throw 14-5 12-4 11-4 10-3 9-3 10-4 9-3
Nk Vel 400 267 200 160 133 114 178 133
100 Ps .031 .014 .008 .005 .003 .003 .006 .003
Throw 17-6 15-5 13-5 12-4 11-4 11-4 13-4 11-4
Nk Vel 500 333 250 200 167 143 125 222 167
125 Ps .049 .022 .012 .008 .005 .004 .003 .010 .005
Throw 20-7 17-6 16-5 15-5 14-5 13-5 12-4 15-5 14-5
Nk Vel 400 300 240 200 171 150 267 200
150 Ps .031 .018 .011 .008 .006 .004 .014 .008
SGRP-SR
Throw 20-7 18-6 16-6 15-5 15-5 14-5 17-6 15-5 20-25
Nk Vel 350 280 234 200 175 311 233
175 Ps .025 .016 .011 .008 .006 .019 .011
Throw 20-7 18-6 17-6 16-5 15-5 19-7 17-6
Nk Vel 400 320 267 229 200 356 267
200 Ps .031 .020 .014 .010 .008 .025 .014
Throw 22-8 20-7 19-7 18-6 17-6 21-7 19-7
Nk Vel 500 400 333 286 250 444 333
250 Ps .049 .031 .022 .016 .012 .055 .031
Throw 25-9 23-8 22-8 21-7 20-7 27-10 25-9
Nk Vel 480 400 343 300 400
300 Ps .061 .042 .031 .018 .042
Throw 29-10 27-10 26-7 22-8 27-10
Nk Vel 467 400 350 467
350 Ps .055 .041 .024 .055
Throw 30-11 29-10 25-9 30-11
Nk Vel 457 400
400 Ps .051 .031
Throw 31-11 27-10
Nk Vel 450
25-30
450 Ps .049
Throw 32-10
Nk Vel 500
500 Ps .059
Throw 34-12

REGISTERS
GRILLES &

MODEL SGRP-SR
CFM 15 x 9 18 x 9 21 x 9 24 x 9 12 x 12 15 x 12 18 x 12 21 x 12 24 x 12 NC
Nk Vel 107 100
100 Ps .002 .002
Throw 10-4 10-4
SECURITY GRILLES
Nk Vel 133 111 125 100

125 Ps .003 .002 .003 .002
Throw 13-4 12-4 12-4 11-4
Nk Vel 160 133 114 100 150 120 100
150 Ps .005 .003 .003 .002 .004 .003 .002
Throw 14-5 13-5 13-4 12-4 14-5 13-5 12-4
Nk Vel 187 156 133 117 175 140 117 100
175 Ps .007 .005 .003 .003 .006 .004 .003 .002
Throw 16-6 15-5 14-5 14-5 16-5 14-5 14-5 13-4
Nk Vel 213 178 152 133 200 160 133 114 100
200 Ps .009 .006 .005 .003 .008 .005 .003 .003 .002
SGRP-SR
Throw 17-6 16-6 16-5 15-5 18-6 16-6 15-5 14-5 13-5 20-25
Nk Vel 267 222 190 167 250 200 167 143 125
250 Ps .020 .014 .010 .008 .012 .008 .005 .004 .003
Throw 23-8 22-8 20-7 20-5 20-7 18-6 17-6 16-6 16-5
Nk Vel 320 267 229 200 300 240 200 171 150
300 Ps .027 .019 .014 .011 .018 .011 .008 .006 .004
Throw 25-9 24-8 23-8 22-8 22-8 21-7 20-7 19-7 18-6
Nk Vel 373 320 267 233 350 280 233 200 175
350 Ps .035 .027 .018 .014 .031 .020 .014 .110 .008
Throw 28-10 25-9 25-9 24-8 27-10 25-9 24-8 23-8 22-8
Nk Vel 427 373 305 267 400 320 267 229 200
400 Ps .045 .035 .023 .018 .039 .025 .018 .013 .010
Throw 30-11 28-10 27-9 26-9 30-10 27-10 26-9 24-9 23-8
Nk Vel 480 400 343 300 450 360 300 257 225
450 Ps .055 .038 .028 .022 .049 .031 .022 .016 .012
Throw 32-11 31-11 29-10 28-10 32-11 29-10 28-10 26-9 25-9
Nk Vel 444 381 333 500 400 333 286 250
500 Ps .047 .034 .026 .059 .038 .026 .019 .015
Throw 33-11 31-11 30-10 34-12 31-11 30-10 28-10 27-9
Nk Vel 489 419 367 440 367 314 275
25-30
550 Ps .047 .034 .026 .045 .031 .023 .018
Throw 33-11 31-11 30-10 33-12 31-11 30-10 28-10
Nk Vel 457 400 480 400 343 300
600 Ps .048 .037 .053 .037 .027 .021
Throw 35-12 33-12 35-12 33-12 31-11 30-10
REGISTERS
GRILLES &
MODEL SGRP-SR
CFM 21 x 9 24 x 9 12 x 12 15 x 12 18 x 12 21 x 12 24 x 12 NC
Nk Vel 495 433 433 371 325
650 Ps .050 .042 .037 .027 .021
Throw 37-13 35-12 33-12 31-11 30-10
SECURITY GRILLES
Nk Vel 467 467 400 350
700 Ps .049 .042 .031 .024
Throw 37-13 35-12 33-12 32-11
Nk Vel 500 500 429 375
20-25
750 Ps .055 .049 .036 .027
Throw 38-13 37-13 35-12 33-12
Nk Vel 457 400
800 Ps .041 .031
Throw 36-13 35-12
Nk Vel 486 425
850 Ps .046 .035
SGRP-SR
Throw 38-13 36-13
Nk Vel 450
900 Ps .044
Throw 39-14
Nk Vel 475
25-30
950 Ps .049
Throw 40-14
Nk Vel 500
1000 Ps .054
Throw 42-15

REGISTERS
GRILLES &

MODEL SGRP-SR
Nk Vel 128 107
200 Ps .003 .002
Throw 15-5 14-5
SECURITY GRILLES
Nk Vel 160 134

250 Ps .005 .004
Throw 17-6 15-5
Nk Vel 192 160 137 120 133 114 100
300 Ps .007 .005 .004 .003 .003 .003 .002
Throw 19-7 18-6 17-6 16-6 17-6 16-6 15-5
Nk Vel 224 187 160 140 156 133 117
350 Ps .010 .007 .006 .004 .005 .004 .003
Throw 21-7 20-7 19-6 18-6 19-6 19-6 17-6
Nk Vel 256 213 183 160 178 152 133 131 114 100
400 Ps .013 .009 .007 .005 .006 .005 .003 .003 .003 .002
SGRP-SR
Throw 23-8 22-8 21-7 20-7 21-7 20-7 19-7 19-7 18-6 17-6 20-25
Nk Vel 288 240 206 180 200 171 150 147 129 113
450 Ps .017 .012 .009 .007 .008 .006 .004 .004 .004 .003
Throw 25-9 24-8 22-8 21-7 23-7 21-7 20-7 21-7 19-6 19-6
Nk Vel 320 267 229 200 222 190 167 163 143 125
500 Ps .020 .014 .010 .008 .010 .007 .005 .005 .004 .003
Throw 28-10 26-9 24-9 23-8 24-8 23-8 22-8 22-8 21-7 20-7
Nk Vel 352 294 252 220 245 210 184 180 157 138
550 Ps .025 .017 .013 .010 .012 .009 .007 .006 .005 .004
Throw 29-10 27-9 26-9 24-8 25-9 25-8 24-9 23-8 22-7 21-7
Nk Vel 384 320 274 240 267 229 200 196 171 150
600 Ps .029 .020 .015 .011 .014 .010 .008 .007 .006 .004
Throw 31-11 29-10 28-10 26-9 27-10 26-9 25-9 25-9 23-8 22-8
Nk Vel 416 347 297 260 289 248 217 213 186 163
650 Ps .034 .024 .018 .013 .017 .012 .010 .009 .007 .005
Throw 33-11 31-10 29-10 27-9 28-10 27-9 26-9 26-9 24-9 23-8
Nk Vel 448 373 320 280 311 267 233 229 200 175
700 Ps .039 .027 .020 .015 .019 .014 .011 .010 .008 .006
Throw 34-12 32-11 31-11 29-10 30-11 29-10 27-10 27-10 26-9 25-9
Nk Vel 400 343 300 334 286 250 245 215 188
25-30
750 Ps .036 .027 .020 .022 .016 .013 .012 .009 .007
Throw 36-12 34-12 33-11 31-11 30-10 28-10 28-10 27-9 26-9
Nk Vel 427 366 320 356 305 267 261 229 200
800 Ps .045 .033 .025 .025 .018 .014 .013 .010 .008
Throw 38-13 36-13 35-12 33-12 32-11 30-11 30-10 29-10 27-10
REGISTERS
GRILLES &
MODEL SGRP-SR
CFM 18 x 15 21 x 15 24 x 15 18 x 18 21 x 18 24 x 18 21 x 21 24 x 21 24 x 24 NC
Nk Vel 454 389 340 378 324 299 278 243 213
850 Ps .050 .037 .028 .032 .023 .018 .017 .013 .010
Throw 39-13 37-13 36-12 37-13 35-12 33-11 33-11 31-11 30-10
SECURITY GRILLES
Nk Vel 480 411 360 400 343 330 294 257 225
900 Ps .055 .041 .031 .038 .028 .022 .021 .016 .012
Throw 41-14 39-14 37-13 39-14 37-13 35-12 35-12 33-12 32-10
Nk Vel 380 422 362 332 311 272 238
950 Ps .035 .047 .035 .027 .026 .020 .015
Throw 39-13 41-14 39-14 37-13 37-13 32-11 34-11
Nk Vel 457 400 444 381 333 327 286 250
20-25
1000 Ps .049 .038 .055 .041 .031 .030 .023 .018
Throw 42-15 40-14 44-15 42-15 40-14 40-14 38-13 36-13
Nk Vel 440 419 367 360 315 275
1100 Ps .045 .048 .037 .036 .027 .021
SGRP-SR
Throw 42-15 44-15 42-15 42-14 40-14 38-13
Nk Vel 480 457 400 392 343 300
1200 Ps .053 .055 .042 .041 .031 .024
Throw 45-16 46-16 44-16 44-15 42-15 40-14
Nk Vel 467 457 400 350
1400 Ps .055 .053 .041 .031
Throw 49-17 48-17 46-16 44-15
Nk Vel 457 400
1600 Ps .051 .039
Throw 50-17 48-17
Nk Vel 450
25-30
1800 Ps .049
Throw 51-18
Nk Vel 500
2000 Ps .049
Throw 51-1*8
PERFORMANCE NOTES FOR SERIES SGRP-SR

DEFINITION OF UNITS

REGISTERS
GRILLES &
MODEL SGRH
The SGRH medium security return grille is designed to obstruct vision
into the ductwork. The SGRH is constructed with a reinforced steel
face plate of fixed horizontal blades and a wire mesh screen secured
behind the blades. The face plate is welded to a steel sleeve.
SECURITY GRILLES
14-gauge steel blades with 0 or 40 deflection on 1/2" center
10-gauge steel wire mesh screen secured by 1/8" welded angle

Tag: Engineer:
Project:
Optional continuously welded seams Contractor:
Date: Submitted By:
Submittal SGRP-SR-AL
Minimum Security Aluminum Grille
Model SGRP-SR-AL Minimum Security Aluminum Grille Suicide Deterrent Perforated Face
3/16" Holes
SGRH
.125 Aluminum Sleeve On 9/32" Centers

Stitch Welded X = Sleeve Length Staggered
Face Plate Minimum 4"
To Sleeve
1" .125 Aluminum

Face Plate Listed Size
Listed Size + 2"
+ 2"
OBDA AAB SBR-AL LALA

Aluminum Aluminum Anchor Bars Aluminum Security Bars Loose Aluminum Angle
Opposed Blade Damper 1/2" Diameter 1/2" Diameter Bars LALA-2S 2 Angles Short Dimension
Rear Operated 3" Long For Welded In Sleeve LALA-2L 2 Angles Long Dimension
Concrete , Block or Brick Walls 6" On Center Max LALA-4 4 Angles
With Mounting Holes
BALA WALA WAF-AL

Bolted Aluminum Angles Welded Aluminum Angles Welded Aluminum Angle Frame
BALA-2S 2 Angles Short Dimension WALA-2S 2 Angles Short Dimension 1" X 1" X 3/16" Angle
BALA-2L 2 Angles Long Dimension WALA-2L 2 Angles Long Dimension Shipped Loose

Standard Finish: OBDA BALA-2S .125 Plate Aluminum Face & Sleeves
01 White AAB BALA-2L OBDA Can be face operated not recommended
REGISTERS
GRILLES &
SERIES SGRH SPECIFICATIONS
MEDIUM SECURITY FIXED LOUVERS Performance Specification
STEEL MODEL SGRH The manufacturer shall provide published performance
Air diffusers shall be model SGRH manufactured by data. Data shall be tested in accordance to ANSI/
METALAIRE. Units shall be medium security return ASHRAE Standard 70-2006.
grilles of steel construction. Units shall have 14-gauge
Paint Specification
SECURITY GRILLES
horizontal fixed louvers set at 0 (or 40) on 1/2" centers.
Louvers shall be reinforced and welded to a steel sleeve. Process shall be anodic electro-deposition using an
Units shall include a 14-gauge steel face plate and a anodic acrylic paint. Units shall undergo pre-treatment
10-gauge #2 wire mesh screen located behind the louvers including a pressurized spray stage using an alkaline
and secured by 1/8" welded angle. Units shall include a cleaner and a de-ionized water rinse.
1 1/2" border.
steel (Model OBD).
Rear operation of the damper is recommended
SGRH

REGISTERS
GRILLES &
SGRH MODEL NUMBER SPECIFICATION

MEDIUM SECURITY RETURN GRILLE
Model Neck
SGRH 6 8 10 12 14 16 18 20 22 24 26 Sleeve
SECURITY GRILLES
4 - 16
SGRH

Steel - Standard OBD Steel Opposed Blade Damper
01 White SAB Steel Anchor Bars
Steel - Optional SBR Steel Security Bars
02 Satin Silver LSA Loose Steel Angle
03 Black BSA Bolted Steel Angle
28 Custom Color WSA Welded Steel Angle
SH Screw Holes In Face
REGISTERS
GRILLES &
SGRH MODEL NUMBER SPECIFICATION
Model Neck
SGRH 28 30 32 34 36 38 40 42 44 46 48 Sleeve
SECURITY GRILLES
4 - 16
SGRH


REGISTERS
GRILLES &
SERIES SGRH PERFORMANCE DATA

MODEL SGRH
CFM 6x6 9x6 12 x 6 15 x 6 18 x 6 21 x 6 24 x 6 9x9 12 x 9 15 x 9 18 x 9 21 x 9 24 x 9 12 x 12
Nk Vel 200
50
Ps .022
Nk Vel 400 267 200
SECURITY GRILLES
100
Ps .089 .040 .022

Nk Vel 400 300 240 200 267 200
150
Ps .089 .050 .032 .022 .040 .022

Nk Vel 400 320 267 229 200 356 267 213 200
200
Ps .089 .057 .040 .029 .022 .071 .040 .025 .022

Nk Vel 400 333 286 250 444 333 267 222 250
250
Ps .089 .062 .046 .035 .110 .062 .040 .028 .035

Nk Vel 480 400 343 300 400 320 267 229 200 300
300
Ps .129 .089 .066 .050 .089 .057 .040 .029 .022 .050
Nk Vel 400 350 200 374 312 267 234 350
350
Ps .092 .070 .045 .080 .056 .041 .031 .088

SGRH
Nk Vel 457 400 427 356 305 267 400

400
Ps .117 .089 .102 .071 .052 .040 .089

Nk Vel 500 444 381 333 500
500
Ps .201 .159 .117 .089 .139

Nk Vel 457 400 250
600
Ps .159 .122 .070

Nk Vel 467
700
Ps .159
REGISTERS
GRILLES &
SERIES SGRH PERFORMANCE DATA
MODEL SGRH
CFM 15 x 12 18 x 12 21 x 12 24 x 12 15 x 15 18 x 15 21 x 15 24 x 15 18 x 18 21 x 18 24 x 18 21 x 21 24 x 21
Nk Vel 200
250
Ps .022
Nk Vel 240 200
SECURITY GRILLES
300
Ps .032 .022
Nk Vel 280 233 200 224
350
Ps .044 .030 .022 .028

Nk Vel 320 267 229 200 256 213
400
Ps .057 .040 .029 .022 .037 .025

Nk Vel 400 333 286 250 320 267 229 200 222
500
Ps .089 .062 .046 .035 .057 .040 .029 .022 .028

Nk Vel 480 400 343 300 384 320 274 240 267 229 200
600
Ps .129 .089 .066 .050 .082 .057 .042 .032 .040 .029 .022
Nk Vel 467 400 350 448 373 320 280 311 267 233 229 200
700
Ps .159 .117 .089 .112 .078 .057 .044 .054 .040 .030 .029 .022
SGRH
Nk Vel 457 400 427 366 320 356 305 267 261 229
800
Ps .148 .113 .102 .075 .057 .071 .052 .040 .038 .029
Nk Vel 450 480 411 360 400 343 300 294 257
900
Ps .110 .159 .117 .089 .089 .066 .050 .048 .037

Nk Vel 500 457 400 444 381 333 327 286
1000
Ps .159 .168 .129 .110 .081 .062 .059 .046

Nk Vel 480 457 400 392 343
1200
Ps .175 .159 .122 .117 .089

Nk Vel 467 457 400
1400
Ps .159 .152 .117
PERFORMANCE NOTES FOR SERIES SGRH

DEFINITION OF UNITS

REGISTERS
GRILLES &
MODEL SGWM
The SGWM medium security grille is designed to provide a high
volume of air in areas such as dining halls, corridors or exercise
facilities. It is constructed with a steel woven wire mesh backed
face plate welded to a steel sleeve.
SECURITY GRILLES
12-gauge steel face plate
10-gauge woven steel wire mesh
Optional continuously welded seams

SGWM
REGISTERS
GRILLES &
SERIES SGWM SPECIFICATIONS
MEDIUM SECURITY WOVEN MESH Performance Specification
STEEL MODEL SGWM The manufacturer shall provide published performance
Air diffusers shall be model SGWM manufactured by data. Data shall be tested in accordance to ANSI/
METALAIRE. Units shall be medium security grilles of steel ASHRAE Standard 70-2006.
construction with a face plate constructed of 12-gauge
Paint Specification
SECURITY GRILLES
steel backed by a 10-gauge woven mesh screen. The face
shall be stitch welded to the 12-gauge sleeve. Units shall Process shall be anodic electro-deposition using an
have a 1" border. anodic acrylic paint. Units shall undergo pre-treatment
The units shall be the size and quantity as outlined in the including a pressurized spray stage using an alkaline
plans and specifications. cleaner and a de-ionized water rinse.
steel (Model OBD).
SGWM

REGISTERS
GRILLES &
SGWM MODEL NUMBER SPECIFICATION

Model Neck
SGWM 6 8 9 10 12 14 15 16 18 20 21 22 24 26 Sleeve
SECURITY GRILLES
15 X X X X X X X X 4 - 16
16 X X X X X X X
18 X X X X X X
20 X X X X X
21 X X X X
22 X X X
24 X X
SGWM
26 X
Finishes Accessories - Steel

WAF Welded Steel Angle Frame
REGISTERS
GRILLES &
SGWM MODEL NUMBER SPECIFICATION
Model Neck
SGWM 28 30 32 34 36 38 40 42 44 46 48 Sleeve
SECURITY GRILLES
24 X X X X X X X X X X X 4 - 16
SGWM
34 X X X X X X X X
36 X X X X X X X
38 X X X X X X
40 X X X X X
42 X X X X
44 X X X
46 X X
48 X
Available Finishes Available Accessories - Steel

WAF Welded Steel Angle Frame

REGISTERS
GRILLES &
SERIES SGWM PERFORMANCE DATA

MODEL SGWM
CFM 6x6 9x6 12 x 6 15 x 6 18 x 6 21 x 6 24 x 6 9x9 12 x 9 NC
Nk Vel 100
25
Ps 0.0072
Nk Vel 200 133 100
SECURITY GRILLES
50
Ps 0.0306 0.0135 0.0072
Nk Vel 300 200 150 120 100
75
Ps 0.0684 0.0306 0.0171 0.0108 0.0072
Nk Vel 400 267 200 160 133 114 100 178 133
100 25
Ps 0.1215 0.054 0.0306 0.0198 0.0135 0.0099 0.0072 0.0243 0.0135
Nk Vel 400 300 240 200 171 150 267 200
150
Ps 0.1215 0.0684 0.0441 0.0306 0.0225 0.0171 0.054 0.0306
Nk Vel 400 320 267 229 200 356 267
200
Ps 0.1215 0.0783 0.054 0.0396 0.0306 0.0963 0.054
Nk Vel 500 400 333 286 250 444 333
250
Ps 0.1899 0.1215 0.0846 0.0621 0.0477 0.1503 0.0846
SGWM
Nk Vel 480 400 343 300 400

300
Ps 0.2385 0.1656 0.1215 0.0936 0.1215
Nk Vel 467 400 350 467
350
Ps 0.2169 0.1593 0.1215 0.1656
Nk Vel 457 400
400 25-30
Ps 0.2016 0.1539
Nk Vel 450
450
Ps 0.1899
Nk Vel 500
500
Ps 0.2304
REGISTERS
GRILLES &
MODEL SGWM
CFM 15 x 9 18 x 9 21 x 9 24 x 9 12 x 12 15 x 12 18 x 12 21 x 12 24 x 12 NC
Nk Vel 107 100
100
Ps 0.009 0.0072
Nk Vel 160 133 114 100 150 120 100
SECURITY GRILLES
150
Ps 0.0198 0.0135 0.0099 0.0072 0.0171 0.0108 0.0072
Nk Vel 213 178 152 133 200 160 133 114 100
200
Ps 0.0342 0.0243 0.018 0.0135 0.0306 0.0198 0.0135 0.0099 0.0072
Nk Vel 267 222 190 167 250 200 167 143 125
250
Ps 0.054 0.0378 0.0279 0.0207 0.0477 0.0306 0.0207 0.0153 0.0117
Nk Vel 320 267 229 200 300 240 200 171 150
300 25
Ps 0.0783 0.054 0.0396 0.0306 0.0684 0.0441 0.0306 0.0225 0.0171
Nk Vel 373 311 267 233 350 280 233 200 175
350
Ps 0.1062 0.0738 0.054 0.0414 0.0936 0.0594 0.0414 0.0306 0.0234
Nk Vel 427 356 305 267 400 320 267 229 200
400
Ps 0.1755 0.1215 0.0891 0.0684 0.1215 0.0783 0.054 0.0396 0.0306
SGWM
Nk Vel 480 400 343 300 450 360 300 257 225
450
Ps 0.2169 0.1503 0.1107 0.0846 0.1899 0.1215 0.0846 0.0621 0.0477
Nk Vel 444 381 333 500 400 333 286 250
500
Ps 0.1818 0.1332 0.1026 0.2304 0.1476 0.1026 0.0756 0.0576
Nk Vel 489 419 367 440 367 314 275
550
Ps 0.2169 0.1593 0.1215 0.1755 0.1215 0.0891 0.0684
Nk Vel 457 400 480 400 343 300
600
Ps 0.1863 0.1431 0.2061 0.1431 0.1053 0.0801
Nk Vel 495 433 433 371 325
650 25-30
Ps 0.2169 0.1656 0.1656 0.1215 0.0936
Nk Vel 467 467 400 350
700
Ps 0.2169 0.1899 0.1395 0.1071
Nk Vel 500 429 375
750
Ps 0.1899 0.1395 0.1071

REGISTERS
GRILLES &

MODEL SGWM
Nk Vel 128 107
200
Ps 0.0126 0.009
Nk Vel 144 120
250
SECURITY GRILLES
Ps 0.0162 0.01125 0 0
Nk Vel 160 133 114 100 133 114 100
300
Ps 0.0198 0.0135 0.0099 0.0072 0.0135 0.0099 0.0072
Nk Vel 176 147 126 110 156 133 117
350
Ps 0.02385 0.01665 0.01215 0.009 0.0189 0.01395 0.01035
Nk Vel 192 160 137 120 178 152 133 131 114 100
400
Ps 0.0279 0.0198 0.0144 0.0108 0.0243 0.018 0.0135 0.0126 0.0099 0.0072
Nk Vel 224 187 160 140 200 171 150 147 129 113
450
Ps 0.0387 0.027 0.0198 0.0153 0.03105 0.02295 0.0171 0.01665 0.0126 0.00945
Nk Vel 256 213 183 160 222 190 167 163 143 125
500
Ps 0.0495 0.0342 0.0252 0.0198 0.0378 0.0279 0.0207 0.0207 0.0153 0.0117
SGWM
Nk Vel 288 240 206 180 245 210 184 180 157 138
550
Ps 0.0639 0.0441 0.0324 0.0252 0.0459 0.03375 0.02565 0.02475 0.0189 0.0144
25
Nk Vel 320 267 229 200 267 229 200 196 171 150
600
Ps 0.0783 0.054 0.0396 0.0306 0.054 0.0396 0.0306 0.0288 0.0225 0.0171
Nk Vel 352 294 252 220 289 248 217 213 186 163
650
Ps 0.0954 0.06615 0.0486 0.03735 0.0639 0.0468 0.036 0.0342 0.02655 0.02025
Nk Vel 384 320 274 240 311 267 233 229 200 175
700
Ps 0.1125 0.0783 0.0576 0.0441 0.0738 0.054 0.0414 0.0396 0.0306 0.0234
Nk Vel 416 347 297 260 334 286 250 245 215 188
750
Ps 0.15615 0.10845 0.07965 0.0612 0.08505 0.06255 0.0477 0.0459 0.0351 0.027
Nk Vel 448 373 320 280 356 305 267 261 229 200
800
Ps 0.1998 0.1386 0.1017 0.0783 0.0963 0.0711 0.054 0.0522 0.0396 0.0306
Nk Vel 427 366 320 400 343 300 294 257 225
900
Ps 0.1755 0.1287 0.099 0.1503 0.1107 0.0846 0.081 0.0621 0.0477
Nk Vel 480 411 360 444 381 333 327 286 250
1000
Ps 0.2169 0.1593 0.1215 0.2169 0.1593 0.1215 0.117 0.0891 0.0684
Nk Vel 457 400 419 367 360 315 275
1100
Ps 0.2286 0.1755 0.1881 0.14355 0.13815 0.1053 0.081
Nk Vel 480 457 400 392 343 300
1200
Ps 0.2061 0.2169 0.1656 0.1593 0.1215 0.0936
Nk Vel 467 457 400 350
1400
Ps 0.2169 0.2079 0.1593 0.1215
Nk Vel 457 400
1600 25-30
Ps 0.2016 0.1539
Nk Vel 450
1800
Ps 0.1899
Nk Vel 500
2000
Ps 0.1899
REGISTERS
GRILLES &
PERFORMANCE NOTES FOR SERIES SGWM
DEFINITION OF UNITS
SECURITY GRILLES
SGWM

REGISTERS
GRILLES &
MODEL SG5500
The SG5500 minimum security directional ceiling diffuser is designed
for areas where overhead air distribution is required while preventing
Tag:
access to the ductwork. The SG5500 is available in steel (SG5500S),
*AIRE
METAL
Series : SG
aluminum (SG5500AL) and stainless steel (SG5500SS) Submittal
construction. No: SG5500S
SECURITY GRILLES
12-gauge steelSecurity
Minimum lattice faceDiffuser
plate
Steel
13/16" square holes with 3/16" fret bars
Model:
Available inSG5500S-1
1, 2, 3 and 4-way airDiffuser
patternsand Face Plate - Surface Mount
Option: SG5LFP Steel Face Plate For SG5500S-1
SG5500S-1 D5 Diffuser And Face Plate - With Steel Neck Mounted Damper - Surface Mount
SG5500S-1 D5A Diffuser And Face Plate - With Aluminum Neck Mounted Damper - Surface Mount
Model: SG5500S-1 (Minimum Security Diffuser And Face Plate - Surface Mount)
Face View (SG5500S-1 Model)
13
Listed Size 16
Listed Size - 1
8 3
11 16 Typ.
2
SG5500
12 Gauge Face Plate 3

16
Ceiling Opening = Listed Size + 3 3
4 3
Listed Size + 5 3 8
4
Listed Size + 5 3
4
Face View (SG5LFP)

13
Number SG5500S
Model: SG5LFP (Steel Face Plate) 16
3
12 Gauge Plate 16 Typ.
Listed Size + 2 3
16
3
8
Listed Size
Submittal
Model: SG5500S-1 D5 (Minimum Security Diffuser And Face Plate - Surface Mount) - With D5 Steel Neck Mount Damper
Model: SG5500S-1 D5A (Minimum Security Diffuser And Face Plate - Surface Mount) - With D5A Aluminum Neck Mount Damper
Options: Duct Size - 1

2
D5 or D5A
Neck Mounted Damper
Mounting Spring
3

1. Available Finishes 2. Available Accessories 3. Construction Details
Standard Finish: D5 Steel, Neck Mount Damper. Neck Sizes available in 3" increments as listed.
01 White. D5A Aluminum, Neck Mount Damper. Face plate is 12 gauge steel. Overall face plate
Note: Contact Factory for other dimension is Listed Size + 5-9/16.
finishes. Pre-drilled holes are included in both the lattice
face and louvered diffuser. The two pieces are
GR290 shipped
Metal Industries, Inc. For complete product specifications andunattached andvisit
submittal data, mustus atbe field assembled
www.metalaire.com
with tamper proof fasteners, provided by others.
REGISTERS
GRILLES &
SERIES SG5500S SPECIFICATIONS
MINIMUM SECURITY DIRECTIONAL Performance Specification
CEILING DIFFUSER STEEL/ALUMINUM/ The manufacturer shall provide published performance
STAINLESS STEEL data. Data shall be tested in accordance to ANSI/
MODELS SG5500S/SG5500AL/SG5500SS
Air diffuser shall be model SG5500S/SG5500AL/SG5500SS Paint Specification
SECURITY GRILLES
manufactured by METALAIRE. Units shall be minimum Process shall be anodic electro-deposition using an
security supply ceiling diffusers constructed of steel anodic acrylic paint. Units shall undergo pre-treatment
(SG5500S), aluminum (SG5500AL) or stainless steel including a pressurized spray stage using an alkaline
(SG5500SS). Units shall consist of a 12-gauge steel cleaner and a de-ionized water rinse.
lattice face panel with 13/16" square holes and

3/16" fret bars mounted in front of a fixed pattern
louvered core fastened into a border with spring loaded
latches. Units shall be furnished with screw holes for
tamper proof screws (provided by others). With the lattice
face removed, the core shall be removable without the use
of tools.
Diffuser shall be engineered to perform in variable
SG5500
volume systems and include deflector blades with a
horizontal lip to provide longer throw distances. The
units shall be the size and quantity as outlined in the
Diffuser shall be available in 1-way, 2-way opposite,
2-way corner, 3-way, and 4-way directional air patterns.
steel (Model OBD), aluminum (Model OBDA) or stainless
steel (Model OBDSS).

REGISTERS
GRILLES &
SG5500 MODEL NUMBER SPECIFICATION

MINIMUM SECURITY LOUVER/LATTICE FACE GRILLE
SG5500S 6 9 12 15 18 21 24 Sleeve Steel - Standard
SG55000AL 6 X X X X X X X 01 White
SG5500SS 9 X X X X X X Steel - Optional
SECURITY GRILLES
12 X X X X X 02 Satin Silver
15 X X X X 03 Black
18 X X X 4 - 16 28 Custom Color
21 X X Stainless Steel - Standard
24 X 23 Satin Polish
27 Stainless Steel - Optional
30 01 White Painted
03 Black Painted
28 Custom Color
SG5500
Available Accessories - Steel Available Accessories - Stainless Steel

OBD Steel Opposed Blade Damper OBD-SS Stainless Steel Opposed Blade Damper
SAB Steel Anchor Bars SAB-SS Stainless Steel Anchor Bars
SBR Steel Security Bars SBR-SS Stainless Steel Security Bars
LSA Loose Steel Angle LSA-SS Loose Stainless Steel Angle
BSA Bolted Steel Angle BSA-SS Bolted Stainless Steel Angle
WSA Welded Steel Angle WSA-SS Welded Stainless Steel Angle
WAF Welded Steel Angle Frame WAF-SS Welded Stainless Steel Angle Frame
SH Optional Screw Holes In Face 316-SS 316 Stainless Steel
REGISTERS
GRILLES &
SERIES SG5500 PERFORMANCE DATA
Neck Size
CFM 6x6 9x9 12 x 12 15 x 15 18 x 18 21 x 21 24 x 24 NC
Nk Vel 200
50 Ps .023
SECURITY GRILLES
Throw 1-4
Nk Vel 400 178 100
100 Ps .091 .018 .006
Throw 3-7 2-5 1-3
Nk Vel 600 267 150
150 Ps .204 .040 .013
Throw 1-11 3-7 2-5
Nk Vel 356 200 128
200 Ps .072 .023 .009
Throw 4-9 3-7 2-6
Nk Vel 444 250 160 111
SG5500
250 Ps .112 .035 .015 .007
Throw 5-11 4-8 3-7 2-6
Nk Vel 533 300 192 133
300 Ps .161 .051 .021 .010
Throw 6-14 4-10 3-8 3-7
Nk Vel 622 350 224 156 114
350 Ps .219 .069 .028 .014 .007 20-25
Throw 7-16 5-12 4-10 3-8 3-7
Nk Vel 400 256 178 131 100
400 Ps .115 .047 .023 .012 .006
Throw 6-13 5-11 4-9 3-8 3-7
Nk Vel 450 288 200 147 133
450 Ps .142 .058 .028 .015 .007
Throw 6-15 5-12 4-10 3-9 3-8
Nk Vel 500 320 222 163 125
500 Ps .171 .070 .034 .018 .009
Throw 7-16 6-14 5-11 4-10 4-8
Nk Vel 550 352 244 180 138
550 Ps .204 .084 .040 .022 .011
Throw 8-18 6-15 5-13 4-11 4-7
Nk Vel 600 384 267 196 150
600 Ps .239 .098 .047 .026 .013
Throw 8-20 7-16 6-14 4-12 4-10
Nk Vel 650 416 289 212 163
650 Ps .278 .114 .055 .030 .015
Throw 9-21 7-18 6-15 5-13 5-11

REGISTERS
GRILLES &
SERIES SG5500 PERFORMANCE

Neck Size
CFM 6x6 9x9 12 x 12 15 x 15 18 x 18 21 x 21 24 x 24 NC
Nk Vel 700 448 311 229 175
700 Ps .278 .114 .055 .030 .017
SECURITY GRILLES
Throw 10-23 8-19 7-16 5-14 5-12

Nk Vel 596 400 294 225
900 Ps .334 .161 .087 .051
Throw 10-25 9-21 7-18 7-15
20-25
Nk Vel 533 392 300
1200 Ps .252 .136 .080
Throw 11-27 9-24 9-20
Nk Vel 667 490 375
1500 Ps .252 .196 .115
Throw 14-34 11-29 11-25
Nk Vel 588 450
SG5500
1800 Ps .242 .142

Throw 13-35 13-30
Nk Vel 653 500
2000 Ps .348 .204
Throw 15-39 15-34
25-30
Nk Vel 600
2400 Ps .278
Throw 18-40
Nk Vel 700
2800 Ps .278
Throw 21-47
PERFORMANCE NOTES FOR SERIES SG5500

DEFINITION OF UNITS
Throw Isothermal throw (supply air temperature the same as average room temperature); values are
for 150, 100 and 50fpm velocities
REGISTERS
GRILLES &
MODEL SGRP-AL
The SGRP-AL minimum security grille is designed to create a barrier
to the ductwork behind the grille. The SGRP-AL is constructed with an
aluminum face plate welded to an aluminum sleeve.
1/8" aluminum face plate
SECURITY GRILLES
Tag: holes on 7/16" center
5/16" Engineer:
Project:
Optional continuously welded seamsContractor:
Date: Submitted By:
Submittal SGRP-AL
Model SGRP-AL Minimum Security Aluminum Grille Perforated Face
5/16" Holes
SGRP-AL
To Sleeve
1" .125 Aluminum

Listed Size + 2"
+ 2"

With Mounting Holes
BALA WALA WAF-AL


Optional Finish No Charge SBR-AL BALA-4 Seams can be continuously welded contact
24 Mill LALA-2S WALA-2S Regional Sales Manager for availability and costs
Optional Finishes Extra Charge LALA-2L WALA-2L
REGISTERS
GRILLES &
SERIES SGRP-AL SPECIFICATIONS

MINIMUM SECURITY 5/16" HOLES Performance Specification
ALUMINUM SGRP-AL The manufacturer shall provide published performance
Air outlets shall be model SGRPAL manufactured by data. Data shall be tested in accordance to ANSI/
METALAIRE. Units shall be minimum security supply ASHRAE Standard 70-2006.
grilles of 1/8" plate aluminum construction. Units shall
Paint Specification
SECURITY GRILLES
have a perforated face plate backed by a stitch-welded

aluminum sleeve. Face plate shall have 5/16" perforations Process shall be anodic electro-deposition using an
on 7/16" staggered centers. The sleeve shall be anodic acrylic paint. Units shall undergo pre-treatment
1/8" aluminum with stitch-welded seams. Units shall including a pressurized spray stage using an alkaline
have a 1" border. cleaner and a de-ionized water rinse.
aluminum (Model OBDA).
SGRP-AL
REGISTERS
GRILLES &
SGRP-AL MODEL NUMBER SPECIFICATION
MINIMUM SECURITY 5/16" PERFORATED FACE
Model Neck
SGRP-AL 6 8 9 10 12 14 15 16 18 20 21 22 24 26 28 30 Sleeve
6 X X X X X X X X X X X X X X X X
SECURITY GRILLES
4 - 16
18 X X X X X X X X
20 X X X X X X X
21 X X X X X X
22 X X X X X
SGRP-AL
24 X X X X
26 X X X
28 X X
30 X
Available Finishes Available Accessories - Aluminum

Steel - Standard OBDA Opposed Blade Damper
01 White AAB Anchor Bars
Steel - Optional SBR-AL Security Bars
02 Satin Silver LALA Loose Angle
03 Black BALA Bolted Angle
28 Custom Color WALA Welded Angle
WAF-AL Welded Angle Frame

REGISTERS
GRILLES &
SERIES SGRP-AL PERFORMANCE DATA

MODEL SGRP-AL
CFM 6x6 9x6 12 x 6 15 x 6 18 x 6 21 x 6 24 x 6 9x9 12 x 9 NC
Nk Vel 200 133 100
50 Ps .008 .003 .002
Throw 10-4 8-3 7-2
SECURITY GRILLES
Nk Vel 300 200 150 120 100 133 100

75 Ps .018 .008 .004 .003 .002 .003 .002
Throw 14-5 12-4 11-4 10-3 9-3 10-4 9-3
Nk Vel 400 267 200 160 133 114 178 133
100 Ps .031 .014 .008 .005 .003 .003 .006 .003
Throw 17-6 15-5 13-5 12-4 11-4 11-4 13-4 11-4
Nk Vel 500 333 250 200 167 143 125 222 167
125 Ps .049 .022 .012 .008 .005 .004 .003 .010 .005
Throw 20-7 17-6 16-5 15-5 14-5 13-5 12-4 15-5 14-5
Nk Vel 400 300 240 200 171 150 267 200
150 Ps .031 .018 .011 .008 .006 .004 .014 .008
SGRP-AL
Throw 20-7 18-6 16-6 15-5 15-5 14-5 17-6 15-5 20-25
Nk Vel 350 280 234 200 175 311 233
175 Ps .025 .016 .011 .008 .006 .019 .011
Throw 20-7 18-6 17-6 16-5 15-5 19-7 17-6
Nk Vel 400 320 267 229 200 356 267
200 Ps .031 .020 .014 .010 .008 .025 .014
Throw 22-8 20-7 19-7 18-6 17-6 21-7 19-7
Nk Vel 500 400 333 286 250 444 333
250 Ps .049 .031 .022 .016 .012 .055 .031
Throw 25-9 23-8 22-8 21-7 20-7 27-10 25-9
Nk Vel 480 400 343 300 400
300 Ps .061 .042 .031 .018 .042
Throw 29-10 27-10 26-7 22-8 27-10
Nk Vel 467 400 350 467
350 Ps .055 .041 .024 .055
Throw 30-11 29-10 25-9 30-11
Nk Vel 457 400
400 Ps .051 .031
Throw 31-11 27-10
Nk Vel 450
25-30
450 Ps .049
Throw 32-10
Nk Vel 500
500 Ps .059
Throw 34-12
REGISTERS
GRILLES &
MODEL SGRP-AL
CFM 15 x 9 18 x 9 21 x 9 24 x 9 12 x 12 15 x 12 18 x 12 21 x 12 24 x 12 NC
Nk Vel 107 100
100 Ps .002 .002
Throw 10-4 10-4
SECURITY GRILLES
Nk Vel 133 111 125 100
125 Ps .003 .002 .003 .002
Throw 13-4 12-4 12-4 11-4
Nk Vel 160 133 114 100 150 120 100
150 Ps .005 .003 .003 .002 .004 .003 .002
Throw 14-5 13-5 13-4 12-4 14-5 13-5 12-4
Nk Vel 187 156 133 117 175 140 117 100
175 Ps .007 .005 .003 .003 .006 .004 .003 .002
Throw 16-6 15-5 14-5 14-5 16-5 14-5 14-5 13-4
Nk Vel 213 178 152 133 200 160 133 114 100
200 Ps .009 .006 .005 .003 .008 .005 .003 .003 .002
SGRP-AL
Throw 17-6 16-6 16-5 15-5 18-6 16-6 15-5 14-5 13-5 20-25
Nk Vel 267 222 190 167 250 200 167 143 125
250 Ps .020 .014 .010 .008 .012 .008 .005 .004 .003
Throw 23-8 22-8 20-7 20-5 20-7 18-6 17-6 16-6 16-5
Nk Vel 320 267 229 200 300 240 200 171 150
300 Ps .027 .019 .014 .011 .018 .011 .008 .006 .004
Throw 25-9 24-8 23-8 22-8 22-8 21-7 20-7 19-7 18-6
Nk Vel 373 320 267 233 350 280 233 200 175
350 Ps .035 .027 .018 .014 .031 .020 .014 .110 .008
Throw 28-10 25-9 25-9 24-8 27-10 25-9 24-8 23-8 22-8
Nk Vel 427 373 305 267 400 320 267 229 200
400 Ps .045 .035 .023 .018 .039 .025 .018 .013 .010
Throw 30-11 28-10 27-9 26-9 30-10 27-10 26-9 24-9 23-8
Nk Vel 480 400 343 300 450 360 300 257 225
450 Ps .055 .038 .028 .022 .049 .031 .022 .016 .012
Throw 32-11 31-11 29-10 28-10 32-11 29-10 28-10 26-9 25-9
Nk Vel 444 381 333 500 400 333 286 250
500 Ps .047 .034 .026 .059 .038 .026 .019 .015
Throw 33-11 31-11 30-10 34-12 31-11 30-10 28-10 27-9
Nk Vel 489 419 367 440 367 314 275
25-30
550 Ps .047 .034 .026 .045 .031 .023 .018
Throw 33-11 31-11 30-10 33-12 31-11 30-10 28-10
Nk Vel 457 400 480 400 343 300
600 Ps .048 .037 .053 .037 .027 .021
Throw 35-12 33-12 35-12 33-12 31-11 30-10

REGISTERS
GRILLES &

MODEL SGRP-AL
CFM 21 x 9 24 x 9 12 x 12 15 x 12 18 x 12 21 x 12 24 x 12 NC
Nk Vel 495 433 433 371 325
650 Ps .050 .042 .037 .027 .021
Throw 37-13 35-12 33-12 31-11 30-10
SECURITY GRILLES
Nk Vel 467 467 400 350

700 Ps .049 .042 .031 .024
Throw 37-13 35-12 33-12 32-11
Nk Vel 500 500 429 375
20-25
750 Ps .055 .049 .036 .027
Throw 38-13 37-13 35-12 33-12
Nk Vel 457 400
800 Ps .041 .031
Throw 36-13 35-12
Nk Vel 486 425
850 Ps .046 .035
SGRP-AL
Throw 38-13 36-13

Nk Vel 450
900 Ps .044
Throw 39-14
Nk Vel 475
25-30
950 Ps .049
Throw 40-14
Nk Vel 500
1000 Ps .054
Throw 42-15
REGISTERS
GRILLES &
MODEL SGRP-AL
Nk Vel 128 107
200 Ps .003 .002
Throw 15-5 14-5
SECURITY GRILLES
Nk Vel 160 134
250 Ps .005 .004
Throw 17-6 15-5
Nk Vel 192 160 137 120 133 114 100
300 Ps .007 .005 .004 .003 .003 .003 .002
Throw 19-7 18-6 17-6 16-6 17-6 16-6 15-5
Nk Vel 224 187 160 140 156 133 117
350 Ps .010 .007 .006 .004 .005 .004 .003
Throw 21-7 20-7 19-6 18-6 19-6 19-6 17-6
Nk Vel 256 213 183 160 178 152 133 131 114 100
400 Ps .013 .009 .007 .005 .006 .005 .003 .003 .003 .002
SGRP-AL
Throw 23-8 22-8 21-7 20-7 21-7 20-7 19-7 19-7 18-6 17-6 20-25
Nk Vel 288 240 206 180 200 171 150 147 129 113
450 Ps .017 .012 .009 .007 .008 .006 .004 .004 .004 .003
Throw 25-9 24-8 22-8 21-7 23-7 21-7 20-7 21-7 19-6 19-6
Nk Vel 320 267 229 200 222 190 167 163 143 125
500 Ps .020 .014 .010 .008 .010 .007 .005 .005 .004 .003
Throw 28-10 26-9 24-9 23-8 24-8 23-8 22-8 22-8 21-7 20-7
Nk Vel 352 294 252 220 245 210 184 180 157 138
550 Ps .025 .017 .013 .010 .012 .009 .007 .006 .005 .004
Throw 29-10 27-9 26-9 24-8 25-9 25-8 24-9 23-8 22-7 21-7
Nk Vel 384 320 274 240 267 229 200 196 171 150
600 Ps .029 .020 .015 .011 .014 .010 .008 .007 .006 .004
Throw 31-11 29-10 28-10 26-9 27-10 26-9 25-9 25-9 23-8 22-8
Nk Vel 416 347 297 260 289 248 217 213 186 163
650 Ps .034 .024 .018 .013 .017 .012 .010 .009 .007 .005
Throw 33-11 31-10 29-10 27-9 28-10 27-9 26-9 26-9 24-9 23-8
Nk Vel 448 373 320 280 311 267 233 229 200 175
700 Ps .039 .027 .020 .015 .019 .014 .011 .010 .008 .006
Throw 34-12 32-11 31-11 29-10 30-11 29-10 27-10 27-10 26-9 25-9
Nk Vel 400 343 300 334 286 250 245 215 188
25-30
750 Ps .036 .027 .020 .022 .016 .013 .012 .009 .007
Throw 36-12 34-12 33-11 31-11 30-10 28-10 28-10 27-9 26-9
Nk Vel 427 366 320 356 305 267 261 229 200
800 Ps .045 .033 .025 .025 .018 .014 .013 .010 .008
Throw 38-13 36-13 35-12 33-12 32-11 30-11 30-10 29-10 27-10

REGISTERS
GRILLES &

MODEL SGRP-AL
CFM 18 x 15 21 x 15 24 x 15 18 x 18 21 x 18 24 x 18 21 x 21 24 x 21 24 x 24 NC
Nk Vel 454 389 340 378 324 299 278 243 213
850 Ps .050 .037 .028 .032 .023 .018 .017 .013 .010
Throw 39-13 37-13 36-12 37-13 35-12 33-11 33-11 31-11 30-10
SECURITY GRILLES
Nk Vel 480 411 360 400 343 330 294 257 225
900 Ps .055 .041 .031 .038 .028 .022 .021 .016 .012
Throw 41-14 39-14 37-13 39-14 37-13 35-12 35-12 33-12 32-10
Nk Vel 380 422 362 332 311 272 238
950 Ps .035 .047 .035 .027 .026 .020 .015
Throw 39-13 41-14 39-14 37-13 37-13 32-11 34-11
Nk Vel 457 400 444 381 333 327 286 250
20-25
1000 Ps .049 .038 .055 .041 .031 .030 .023 .018
Throw 42-15 40-14 44-15 42-15 40-14 40-14 38-13 36-13
Nk Vel 440 419 367 360 315 275
1100 Ps .045 .048 .037 .036 .027 .021
SGRP-AL
Throw 42-15 44-15 42-15 42-14 40-14 38-13

Nk Vel 480 457 400 392 343 300
1200 Ps .053 .055 .042 .041 .031 .024
Throw 45-16 46-16 44-16 44-15 42-15 40-14
Nk Vel 467 457 400 350
1400 Ps .055 .053 .041 .031
Throw 49-17 48-17 46-16 44-15
Nk Vel 457 400
1600 Ps .051 .039
Throw 50-17 48-17
Nk Vel 450
25-30
1800 Ps .049
Throw 51-18
Nk Vel 500
2000 Ps .049
Throw 51-1*8
PERFORMANCE NOTES FOR SERIES SGRP-AL

DEFINITION OF UNITS
REGISTERS
GRILLES &
MODEL SGRP-SR-AL
The SGRP-SR-AL is a minimum security grille designed as a suicide
deterrent. The small holes inhibit threading objects through the face.
The SGRP-SR-AL is constructed with an aluminum plate welded to an
aluminum sleeve.
SECURITY GRILLES
1/8" aluminum face plate
Tag:holes on 9/32" center

3/16" Engineer:
Project:
Continuously welded seams Contractor:
Date: Submitted By:
Submittal SGRP-SR-AL
Model SGRP-SR-AL Minimum Security Aluminum Grille Suicide Deterrent Perforated Face
3/16" Holes
SGRP-SR-AL
To Sleeve
1" .125 Aluminum

Listed Size + 2"
+ 2"

With Mounting Holes
BALA WALA WAF-AL

BALA-2S 2 Angles Short Dimension WALA-2S 2 Angles Short Dimension 1" X 1" X 3/16" Angle
BALA-2L 2 Angles Long Dimension WALA-2L 2 Angles Long Dimension Shipped Loose

Optional Finish No Charge SBR-AL BALA-4 Seams can be continuously welded contact
24 Mill LALA-2S WALA-2S Regional Sales Manager for availability and costs
REGISTERS
GRILLES &
SERIES SGRP-SR-AL SPECIFICATIONS

MINIMUM SECURITY 3/16" HOLES Performance Specification
ALUMINUM MODEL SGRP-SR-AL The manufacturer shall provide published performance
Air outlets shall be model SGRP-SR-AL manufactured data. Data shall be tested in accordance to ANSI/
by METALAIRE. Units shall be minimum security supply ASHRAE Standard 70-2006.
grilles of 1/8" plate aluminum construction. Units shall
Paint Specification
SECURITY GRILLES
have a perforated face plate backed by a continuously

seam welded aluminum sleeve. Face plate shall be Process shall be anodic electro-deposition using an
constructed 3/16" perforations on 9/32" staggered centers anodic acrylic paint. Units shall undergo pre-treatment
and shall be stitch welded to the sleeve. The sleeve shall including a pressurized spray stage using an alkaline
be 1/8" aluminum with continuously welded seams. Units cleaner and a de-ionized water rinse.
shall have a 1" border.
aluminum (Model OBDA).
SGRP-SR-AL
REGISTERS
GRILLES &
SGRP-SR-AL MODEL NUMBER SPECIFICATION
MINIMUM SECURITY 3/16" PERFORATED FACE
Model Neck
SGRP-SR-AL 6 8 9 10 12 14 15 16 18 20 21 22 24 26 28 30 Sleeve
6 X X X X X X X X X X X X X X X X
SECURITY GRILLES
4 - 16
18 X X X X X X X X
20 X X X X X X X
21 X X X X X X
22 X X X X X
SGRP-SR-AL
24 X X X X
26 X X X
28 X X
30 X

Steel - Standard OBDA Opposed Blade Damper
Steel - Optional SBR-AL Security Bars

REGISTERS
GRILLES &

MODEL SGRP-SR-AL
CFM 6x6 9x6 12 x 6 15 x 6 18 x 6 21 x 6 24 x 6 9x9 12 x 9 NC
Nk Vel 200 133 100
50 Ps .008 .003 .002
Throw 10-4 8-3 7-2
SECURITY GRILLES
Nk Vel 300 200 150 120 100 133 100

75 Ps .018 .008 .004 .003 .002 .003 .002
Throw 14-5 12-4 11-4 10-3 9-3 10-4 9-3
Nk Vel 400 267 200 160 133 114 178 133
100 Ps .031 .014 .008 .005 .003 .003 .006 .003
Throw 17-6 15-5 13-5 12-4 11-4 11-4 13-4 11-4
Nk Vel 500 333 250 200 167 143 125 222 167
125 Ps .049 .022 .012 .008 .005 .004 .003 .010 .005
Throw 20-7 17-6 16-5 15-5 14-5 13-5 12-4 15-5 14-5
Nk Vel 400 300 240 200 171 150 267 200
150 Ps .031 .018 .011 .008 .006 .004 .014 .008
SGRP-SR-AL
Throw 20-7 18-6 16-6 15-5 15-5 14-5 17-6 15-5 20-25
Nk Vel 350 280 234 200 175 311 233
175 Ps .025 .016 .011 .008 .006 .019 .011
Throw 20-7 18-6 17-6 16-5 15-5 19-7 17-6
Nk Vel 400 320 267 229 200 356 267
200 Ps .031 .020 .014 .010 .008 .025 .014
Throw 22-8 20-7 19-7 18-6 17-6 21-7 19-7
Nk Vel 500 400 333 286 250 444 333
250 Ps .049 .031 .022 .016 .012 .055 .031
Throw 25-9 23-8 22-8 21-7 20-7 27-10 25-9
Nk Vel 480 400 343 300 400
300 Ps .061 .042 .031 .018 .042
Throw 29-10 27-10 26-7 22-8 27-10
Nk Vel 467 400 350 467
350 Ps .055 .041 .024 .055
Throw 30-11 29-10 25-9 30-11
Nk Vel 457 400
400 Ps .051 .031
Throw 31-11 27-10
Nk Vel 450
25-30
450 Ps .049
Throw 32-10
Nk Vel 500
500 Ps .059
Throw 34-12
REGISTERS
GRILLES &
MODEL SGRP-SR-AL
CFM 15 x 9 18 x 9 21 x 9 24 x 9 12 x 12 15 x 12 18 x 12 21 x 12 24 x 12 NC
Nk Vel 107 100
100 Ps .002 .002
Throw 10-4 10-4
SECURITY GRILLES
Nk Vel 133 111 125 100
125 Ps .003 .002 .003 .002
Throw 13-4 12-4 12-4 11-4
Nk Vel 160 133 114 100 150 120 100
150 Ps .005 .003 .003 .002 .004 .003 .002
Throw 14-5 13-5 13-4 12-4 14-5 13-5 12-4
Nk Vel 187 156 133 117 175 140 117 100
175 Ps .007 .005 .003 .003 .006 .004 .003 .002
Throw 16-6 15-5 14-5 14-5 16-5 14-5 14-5 13-4
Nk Vel 213 178 152 133 200 160 133 114 100
200 Ps .009 .006 .005 .003 .008 .005 .003 .003 .002
SGRP-SR-AL
Throw 17-6 16-6 16-5 15-5 18-6 16-6 15-5 14-5 13-5 20-25
Nk Vel 267 222 190 167 250 200 167 143 125
250 Ps .020 .014 .010 .008 .012 .008 .005 .004 .003
Throw 23-8 22-8 20-7 20-5 20-7 18-6 17-6 16-6 16-5
Nk Vel 320 267 229 200 300 240 200 171 150
300 Ps .027 .019 .014 .011 .018 .011 .008 .006 .004
Throw 25-9 24-8 23-8 22-8 22-8 21-7 20-7 19-7 18-6
Nk Vel 373 320 267 233 350 280 233 200 175
350 Ps .035 .027 .018 .014 .031 .020 .014 .110 .008
Throw 28-10 25-9 25-9 24-8 27-10 25-9 24-8 23-8 22-8
Nk Vel 427 373 305 267 400 320 267 229 200
400 Ps .045 .035 .023 .018 .039 .025 .018 .013 .010
Throw 30-11 28-10 27-9 26-9 30-10 27-10 26-9 24-9 23-8
Nk Vel 480 400 343 300 450 360 300 257 225
450 Ps .055 .038 .028 .022 .049 .031 .022 .016 .012
Throw 32-11 31-11 29-10 28-10 32-11 29-10 28-10 26-9 25-9
Nk Vel 444 381 333 500 400 333 286 250
500 Ps .047 .034 .026 .059 .038 .026 .019 .015
Throw 33-11 31-11 30-10 34-12 31-11 30-10 28-10 27-9
Nk Vel 489 419 367 440 367 314 275
25-30
550 Ps .047 .034 .026 .045 .031 .023 .018
Throw 33-11 31-11 30-10 33-12 31-11 30-10 28-10
Nk Vel 457 400 480 400 343 300
600 Ps .048 .037 .053 .037 .027 .021
Throw 35-12 33-12 35-12 33-12 31-11 30-10

REGISTERS
GRILLES &

MODEL SGRP-SR-AL
CFM 21 x 9 24 x 9 12 x 12 15 x 12 18 x 12 21 x 12 24 x 12 NC
Nk Vel 495 433 433 371 325
650 Ps .050 .042 .037 .027 .021
Throw 37-13 35-12 33-12 31-11 30-10
SECURITY GRILLES
Nk Vel 467 467 400 350

700 Ps .049 .042 .031 .024
Throw 37-13 35-12 33-12 32-11
Nk Vel 500 500 429 375
20-25
750 Ps .055 .049 .036 .027
Throw 38-13 37-13 35-12 33-12
Nk Vel 457 400
800 Ps .041 .031
Throw 36-13 35-12
Nk Vel 486 425
850 Ps .046 .035
SGRP-SR-AL
Throw 38-13 36-13

Nk Vel 450
900 Ps .044
Throw 39-14
Nk Vel 475
25-30
950 Ps .049
Throw 40-14
Nk Vel 500
1000 Ps .054
Throw 42-15
REGISTERS
GRILLES &
MODEL SGRP-SR-AL
Nk Vel 128 107
200 Ps .003 .002
Throw 15-5 14-5
SECURITY GRILLES
Nk Vel 160 134
250 Ps .005 .004
Throw 17-6 15-5
Nk Vel 192 160 137 120 133 114 100
300 Ps .007 .005 .004 .003 .003 .003 .002
Throw 19-7 18-6 17-6 16-6 17-6 16-6 15-5
Nk Vel 224 187 160 140 156 133 117
350 Ps .010 .007 .006 .004 .005 .004 .003
Throw 21-7 20-7 19-6 18-6 19-6 19-6 17-6
Nk Vel 256 213 183 160 178 152 133 131 114 100
400 Ps .013 .009 .007 .005 .006 .005 .003 .003 .003 .002
SGRP-SR-AL
Throw 23-8 22-8 21-7 20-7 21-7 20-7 19-7 19-7 18-6 17-6 20-25
Nk Vel 288 240 206 180 200 171 150 147 129 113
450 Ps .017 .012 .009 .007 .008 .006 .004 .004 .004 .003
Throw 25-9 24-8 22-8 21-7 23-7 21-7 20-7 21-7 19-6 19-6
Nk Vel 320 267 229 200 222 190 167 163 143 125
500 Ps .020 .014 .010 .008 .010 .007 .005 .005 .004 .003
Throw 28-10 26-9 24-9 23-8 24-8 23-8 22-8 22-8 21-7 20-7
Nk Vel 352 294 252 220 245 210 184 180 157 138
550 Ps .025 .017 .013 .010 .012 .009 .007 .006 .005 .004
Throw 29-10 27-9 26-9 24-8 25-9 25-8 24-9 23-8 22-7 21-7
Nk Vel 384 320 274 240 267 229 200 196 171 150
600 Ps .029 .020 .015 .011 .014 .010 .008 .007 .006 .004
Throw 31-11 29-10 28-10 26-9 27-10 26-9 25-9 25-9 23-8 22-8
Nk Vel 416 347 297 260 289 248 217 213 186 163
650 Ps .034 .024 .018 .013 .017 .012 .010 .009 .007 .005
Throw 33-11 31-10 29-10 27-9 28-10 27-9 26-9 26-9 24-9 23-8
Nk Vel 448 373 320 280 311 267 233 229 200 175
700 Ps .039 .027 .020 .015 .019 .014 .011 .010 .008 .006
Throw 34-12 32-11 31-11 29-10 30-11 29-10 27-10 27-10 26-9 25-9
Nk Vel 400 343 300 334 286 250 245 215 188
25-30
750 Ps .036 .027 .020 .022 .016 .013 .012 .009 .007
Throw 36-12 34-12 33-11 31-11 30-10 28-10 28-10 27-9 26-9
Nk Vel 427 366 320 356 305 267 261 229 200
800 Ps .045 .033 .025 .025 .018 .014 .013 .010 .008
Throw 38-13 36-13 35-12 33-12 32-11 30-11 30-10 29-10 27-10

REGISTERS
GRILLES &

MODEL SGRP-SR-AL
CFM 18 x 15 21 x 15 24 x 15 18 x 18 21 x 18 24 x 18 21 x 21 24 x 21 24 x 24 NC
Nk Vel 454 389 340 378 324 299 278 243 213
850 Ps .050 .037 .028 .032 .023 .018 .017 .013 .010
Throw 39-13 37-13 36-12 37-13 35-12 33-11 33-11 31-11 30-10
SECURITY GRILLES
Nk Vel 480 411 360 400 343 330 294 257 225
900 Ps .055 .041 .031 .038 .028 .022 .021 .016 .012
Throw 41-14 39-14 37-13 39-14 37-13 35-12 35-12 33-12 32-10
Nk Vel 380 422 362 332 311 272 238
950 Ps .035 .047 .035 .027 .026 .020 .015
Throw 39-13 41-14 39-14 37-13 37-13 32-11 34-11
Nk Vel 457 400 444 381 333 327 286 250
20-25
1000 Ps .049 .038 .055 .041 .031 .030 .023 .018
Throw 42-15 40-14 44-15 42-15 40-14 40-14 38-13 36-13
Nk Vel 440 419 367 360 315 275
1100 Ps .045 .048 .037 .036 .027 .021
SGRP-SR-AL
Throw 42-15 44-15 42-15 42-14 40-14 38-13

Nk Vel 480 457 400 392 343 300
1200 Ps .053 .055 .042 .041 .031 .024
Throw 45-16 46-16 44-16 44-15 42-15 40-14
Nk Vel 467 457 400 350
1400 Ps .055 .053 .041 .031
Throw 49-17 48-17 46-16 44-15
Nk Vel 457 400
1600 Ps .051 .039
Throw 50-17 48-17
Nk Vel 450
25-30
1800 Ps .049
Throw 51-18
Nk Vel 500
2000 Ps .049
Throw 51-1*8
PERFORMANCE NOTES FOR SERIES SGRP

DEFINITION OF UNITS
REGISTERS
GRILLES &
MODEL SG2000
The SG2000 minimum security linear bar grille is designed for
areas with corrosive environments that require limited duct
access. The SG2000 is constructed of heavy gauge aluminum
bars welded to an aluminum frame.
Submittal: SG2000
SECURITY GRILLES
7/32" bars on 1/2" centers
Minimum Security
Fixed 0, 15, Grilles / Registers
or 30 deflection cores
Extruded Aluminum - 1" Border - 7/32" Bars
Optional sleeve available - 1/2"
Security Center
Grille - 0, 15 or 30 Deflection - No Sleeve
Models: SG2000-1 SG2015-1 SG2030-1 Security Grille - 0, 15 or 30 Deflection - Steel Sleeve
SG2000-2 SG2015-2 SG2030-2
Model: 2000-1 (Security Grille - 0 , 15 or 30 Deflection - No Sleeve)
X Face View (Both Models)

(Optional) Wall Sleeve
Mounting Screw Holes
And Companion Flange
Optional
Listed
Listed Optional Screen
Width
SG2000
Width
+11
2 -1
2 Cross Bars Welded
To Frame
Recommended Wall Opening Lengths Up To 12"

= Listed Size + 1/2 4 Holes
One Each Side Centered
Model: 2000-2 (Security Grille - 0 , 15 or 30 Deflection - With Steel Sleeve)
Optional Screen
Listed
Listed Width
Width Cross Bars Welded
-1 To Frame
+12 1 2 Lengths Over 12" Up to 36"
Wall Sleeve 6 Holes
1 Each End Centered
1 2 Holes Each Side
4" In From End
Recommended Wall Opening
= Listed Size + 1/2 Side View (Both Models)
1
Listed Length + 1 2
X - Has to be specify (when ordering).
1
Listed Length - 2
Installation Option
Installation OptionOnly
Only
SG2000-1/SG2015-1/SG2030-1
SG2000-1 / SG2015-1 / SG2030-1
AAB AluminumSAB
AnchorSteel
BarsAnchor Bars
SBR-AL AluminumSBR
SecuritySteel
BarsSecurity Bars Air Pattern Deflectors
LALA-2S LSA- 2S Angle
Loose Aluminum Loose Steel Angle (2AShort
(2 Angles Angles Short Dimensions)
Dimension) 9 30
32 15
LALA-2L LSA - 2L Loose
Loose Aluminum AngleSteel Angle (2 Long
(2 Angles AnglesDimension)
Long Dimensions) 7
LALA-4 4 Loose Aluminum Angles 32
LSA - 4 4 Loose Angles
13
WAF-AL Welded Aluminum
WAF Angle
Welded Frame
Steel Angle Frame 8
BALA-2S Bolted Aluminum Angles (2 Angles 1

BSA - 2S Bolted Steel Angles (2Short
AnglesDimension)
Short Dimensions) 2
BALA-2L Bolted Aluminum Angles
BSA - 2L Bolted (2 Angles
Steel Angles (2 Long
AnglesDimension)
Long Dimensions)
BALA-4 4 Bolted Aluminum Angles
BSA - 4 4 Bolted AnglesAngles
WALA-2S Welded Aluminum Angles (2 Angles Short Dimension)
WSA - 2S Welded Steel Angles (2 Angles Short Dimensions) 0 Deflection 15 Deflection 30 Deflection
WALA-2L Welded Aluminum Angles (2 Angels Long Dimension)
WSA - 2L Welded Steel Angles (2 Angles Long Dimensions)
WALA-4 4 Welded Aluminum Angles
WSA - 4 4 Welded Angles
Notes: (check if provided)
1. Available Finishes 2. Available Accessories 3. Available Options 4. Construction Details
StandardFinish:
(Factory Mounted Accessories): Extruded AluminumGR311
Construction
01 White. OBD - Steel Opposed Blade Damper. OBDA can be face operated not
REGISTERS
GRILLES &
SERIES SG2000 SPECIFICATIONS

MINIMUM SECURITY LINEAR BAR GRILLE Performance Specification
ALUMINUM MODEL SG2000 The manufacturer shall provide published performance
Air grille (or inlets) shall be model SG2000 manufactured data. Data shall be tested in accordance to ANSI/
by METALAIRE. Units shall be minimum security supply ASHRAE Standard 70-2006.
grilles of aluminum construction.
Paint Specification
SECURITY GRILLES
Units shall have linear bars 7/32" spaced on 1/2" centers

welded to an aluminum frame. Border shall be 1" wide. Process shall be anodic electro-deposition using an
Optional opposed blade damper constructed of aluminum
shall be provided on units 4" and wider. Units less than 4"
wide shall be provided with an aluminum flap
type damper.
Damper must be operable from the rear of the grille.
SG2000 MODEL NUMBER SPECIFICATION

MINIMUM SECURITY BAR GRILLES
SG2000
Model Neck
SG2000-1 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 Sleeve
SG2015-1 4 X X X X X X X X X X X X X X X X
SG2015-2 7 X X X X X X X X X X X X X X X 4 - 16
SG2030-2 8 X X X X X X X X X X X X X X X

Standard OBDA Opposed Blade Damper
Optional SBR-AL Security Bars
REGISTERS
GRILLES &
SG2000 PERFORMANCE DATA
MODEL SG2000
CFM 6x4 6x6 12 x 4 12 x 6 12 x 8 12 x 10 12 x 12 18 x 4 18 x 6 NC
Nk Vel 150 100
25 Ps .004 .002
Throw 4-5 2-3
SECURITY GRILLES
Nk Vel 300 200 150 100
50 Ps .017 .007 .004 .002
Throw 9-12 8-10 7-9 5-7
Nk Vel 450 300 225 150 133 150 100
75 Ps .038 .017 .009 .004 .002 .004 .002
Throw 12-16 11-14 9-13 9-12 7-9 8-11 7-9
Nk Vel 400 300 200 150 120 100 200 133
100 Ps .030 .017 .007 .004 .003 .002 .007 .030
Throw 13-17 12-15 10-13 9-12 8-11 8-10 7-13 9-11
Nk Vel 500 375 250 188 150 125
125 Ps .047 .026 .012 .007 .004 .003
SG2000
Throw 15-20 14-18 12-16 11-14 10-13 10-12
Nk Vel 450 300 225 180 150 300 200
20-25
150 Ps .038 .017 .009 .006 .004 .017 .007
Throw 15-20 13-18 12-16 11-15 11-14 13-18 12-15
Nk Vel 350 263 210 175
175 Ps .023 .013 .008 .006
Throw 15-20 13-18 12-17 12-15
Nk Vel 400 300 240 200 400 267
200 Ps .038 .021 .014 .007 .030 .013
Throw 18-23 16-21 12-20 13-17 16-22 14-19
Nk Vel 450 338 270 225
225 Ps .047 .026 .017 .010
Throw 19-25 17-23 16-21 14-18
Nk Vel 500 375 300 250 500 333
250 Ps .057 .032 .020 .012 .047 .021
Throw 20-27 18-24 17-22 15-20 19-25 16-22
Nk Vel 413 330 275
275 Ps .038 .024 .014
Throw 19-26 18-24 16-21
Nk Vel 450 360 300 400
300 Ps .044 .028 .017 .030
Throw 20-27 19-25 17-22 19-25
Nk Vel 488 390 325
25-30
325 Ps .052 .033 .020

Throw 21-29 20-26 18-23
Nk Vel 420 350 467
350 Ps .033 .023 .041
Throw 20-26 19-25 21-27

REGISTERS
GRILLES &

MODEL SG2000
CFM 18 x 8 18 x 10 18 x 12 24 x 4 24 x 6 24 x 8 24 x 10 24 x 12 30 x 4 NC
Nk Vel 133
75 Ps .002
Throw 7-9
SECURITY GRILLES
Nk Vel 100 150 100 120

100 Ps .002 .004 .002 .003
Throw 8-10 9-12 8-10 8-11
Nk Vel 150 120 100 225 150 113 180
150 Ps .004 .003 .002 .009 .004 .002 .006
Throw 11-14 10-13 9-12 12-16 11-14 9-13 11-15
Nk Vel 200 160 133 300 200 150 120 100 240
200 Ps .007 .005 .003 .017 .007 .004 .003 .002 .011
Throw 13-17 12-16 11-15 15-20 13-17 12-15 11-14 10-13 14-18
Nk Vel 250 200 167 375 250 188 150 125 300
250 Ps .012 .007 .005 .026 .012 .007 .004 .003 .017
Throw 15-20 14-18 13-17 17-23 15-20 14-18 13-17 12-16 16-21
SG2000
Nk Vel 300 240 200 450 300 225 180 150 360
300 Ps .017 .011 .007 .038 .017 .009 .006 .004 .024
20-25
Throw 17-22 16-21 15-20 19-26 17-22 15-20 14-19 13-18 19-25
Nk Vel 350 280 233 350 263 210 175
350 Ps .023 .015 .010 .023 .013 .008 .006
Throw 19-25 17-23 16-22 19-25 17-23 16-21 15-20
Nk Vel 400 320 267 400 300 240 200 480
400 Ps .038 .024 .017 .047 .026 .017 .012 .043
Throw 20-30 21-27 19-26 24-32 22-29 20-27 19-25 22-29
Nk Vel 450 360 300
450 Ps .047 .030 .021
Throw 24-32 22-29 21-28
Nk Vel 500 400 333 500 375 300 250
500 Ps .057 .036 .025 .067 .038 .024 .017
Throw 25-34 24-31 22-30 27-36 24-33 23-30 21-28
Nk Vel 440 367 450 360 300
550 Ps .043 .030 .052 .033 .023
Throw 25-33 24-31 26-27 25-34 24-32
Nk Vel 480 400 420 350
600 Ps .051 .035 .043 .038
Throw 26-35 25-33 28-37 26-35
Nk Vel 433 480 400
650 Ps .041 .055 .038
Throw 26-35 30-40 28-38
Nk Vel 467 450
25-30
700 Ps .041 .047

Throw 26-35 30-40
Nk Vel 500
800 Ps .047
Throw 30-40
REGISTERS
GRILLES &
MODEL SG2000
CFM 30 x 6 30 x 8 30 x 10 30 x 12 36 x 4 36 x 6 36 x 8 36 x 10 36 x 12 NC
Nk Vel 120
150 Ps .003
Throw 10-13
SECURITY GRILLES
Nk Vel 160 120 200 133 100
200 Ps .005 .003 .007 .003 .002
Throw 12-16 11-14 13-17 11-15 10-13
Nk Vel 200 150 120 100
250 Ps .007 .004 .003 .002
Throw 14-18 13-17 12-15 11-15
Nk Vel 240 180 144 120 300 200 150 120 100
300 Ps .011 .006 .004 .003 .017 .007 .004 .003 .002
Throw 16-21 14-19 13-18 12-16 17-22 15-20 13-18 12-16 12-15
Nk Vel 320 240 192 160 400 267 200 160 133
400 Ps .019 .011 .007 .005 .030 .013 .007 .005 .003
Throw 19-25 17-23 16-21 15-20 20-27 18-24 16-22 15-20 14-19
Nk Vel 400 300 240 200 500 333 250 200 167
SG2000
500 Ps .030 .017 .011 .007 .047 .021 .012 .007 .005
Throw 22-29 20-27 19-25 17-23 24-32 21-28 19-25 17-23 16-22
20-25
Nk Vel 480 360 288 240 400 300 240 200
600 Ps .059 .033 .021 .015 .030 .017 .011 .007
Throw 28-37 25-34 23-31 22-29 24-31 21-28 20-26 19-25
Nk Vel 420 336 280 467 350 280 233
700 Ps .043 .028 .019 .041 .023 .015 .010
Throw 28-37 26-34 24-32 26-35 24-32 22-29 21-27
Nk Vel 480 384 320 400 320 267
800 Ps .055 .035 .024 .030 .019 .013
Throw 30-40 28-37 26-35 26-35 24-32 23-30
Nk Vel 432 360 450 360 300
900 Ps .043 .030 .047 .030 .021
Throw 30-40 28-37 30-40 28-37 26-35
Nk Vel 480 400 500 400 333
1000 Ps .052 .036 .057 .036 .025
Throw 32-43 30-40 32-43 30-40 28-37
Nk Vel 440 440 367
1100 Ps .043 .043 .030
Throw 32-42 32-42 30-40
Nk Vel 480 480 400
1200 Ps .043 .051 .035
Throw 32-42 34-45 32-42
Nk Vel 433
1300 Ps .041
Throw 33-44
25-30
Nk Vel 467
1400 Ps .047
Throw 35-46
Nk Vel 500
1500 Ps .047
Throw 35-46

REGISTERS
GRILLES &
PERFORMANCE NOTES FOR SERIES SG2000

DEFINITION OF UNITS
SECURITY GRILLES
SG2000
REGISTERS
GRILLES &
MODEL SGLF
The SGLF minimum security lattice face grille is designed to prevent
access to ductwork and other systems in minimally supervised areas.
The SGLF is available in steel (SGLF), aluminum (SGLF-AL) and stainless
steel (SGLF-SS) construction.
SECURITY GRILLES
Standard 13/16" x 13/16" hole size (SGLF-13)
Tag: 1/2" x 1/2" holes size (SGLF-50),

Optional Engineer:
3/4" x 3/4" hole size (SGLF-75)
Project:
and 1" x 1" hole size (SGLF-10) Contractor:
Date: Submitted By:
Submittal SGLF
Minimum Steel Security Grille
Model SGLF-50 Minimum Steel Security Grille Lattice Face ( A = 1/2" X 1/2" Holes)
Model SGLF-75 Minimum Steel Security Grille Lattice Face ( A = 3/4" X 3/4" Holes)
Model SGLF-10 Minimum Steel Security Grille Lattice Face ( A = 1" X 1" Holes)
Face View
A B
Listed Size B = 3/16"
SGLF
Face Plate 12 Gauge Sleeve = Sleeve Length B
Stitch Welded Stitch Welded Minimum 4"
1"
Listed Size + 2" 12 Gauge Steel Listed Size + 2"
OBD SAB SBR LSA

With Mounting Holes
BSA WSA WAF


Standard Finish: OBD BSA-2S 12 Gauge Steel Face & Sleeves
01 White SAB BSA-2L OBD Can be face operated not recommended
Optional Finishes Extra Charge SBR BSA-4 Seams can be continuously welded contact
02 Satin Silver LSA-2S WSA-2S Regional Sales Manager for availability and costs
2013
03Metal Industries, Inc.
Black LSA-2L WSA-2L GR317
28 Special Color / Setup Charge LSA-4 WSA-4
REGISTERS
GRILLES &
SERIES SGLF SPECIFICATIONS

MINIMUM SECURITY LATTICE FACE Performance Specification
STEEL/ALUMINUM/STAINLESS STEEL The manufacturer shall provide published performance
MODELS SGLF/SGLF-AL/SGLF-SS data. Data shall be tested in accordance to ANSI/
Air diffuser shall be model SGLF/SGLF-AL/AGLF-SS ASHRAE Standard 70-2006.
manufactured by METALAIRE. Units shall be minimum
Paint Specification
SECURITY GRILLES
security supply ceiling diffusers constructed of steel

(SGLF), aluminum (SGLF-AL) or stainless steel (SGLF-SS) Process shall be anodic electro-deposition using an
Units shall consist of a 12-gauge steel lattice face panel anodic acrylic paint. Units shall undergo pre-treatment
with 13/16" square holes and 3/16" fret bars. including a pressurized spray stage using an alkaline
Units shall be attached to a 3/16" stitch welded sleeve.

SGLF
REGISTERS
GRILLES &
SGLF MODEL NUMBER SPECIFICATION
MODELS SGLF, SGLF-AL, SGLF-SS
Model Neck Sleeve
SGLF 28 30 32 34 36 38 40 42 44 46 48
SGLF-AL 6 X X X X X X X X X X X
SGLF-SS 8 X X X X X X X X X X X
SECURITY GRILLES
4 - 16
SGLF
34 X X X X X X X X
36 X X X X X X X
38 X X X X X X
40 X X X X X
42 X X X X
44 X X X
46 X X
48 X
Available Finishes Available Accessories - Steel Available Accessories - Stainless Steel

23 Satin Polish SH Optional Screw Holes In Face 316-SS 316 Stainless Steel
01 White Painted
03 Black Painted
28 Custom Color

REGISTERS
GRILLES &
SERIES SGLF PERFORMANCE DATA

MODEL SGLF
CFM 6x6 9x6 12 x 6 15 x 6 18 x 6 21 x 6 24 x 6 9x9 12 x 9 NC
Nk Vel 200 133 100
50 Ps .008 .003 .002
Throw 10-4 8-3 7-2
SECURITY GRILLES
Nk Vel 300 200 150 120 100 133 100

75 Ps .018 .008 .004 .003 .002 .003 .002
Throw 14-5 12-4 11-4 10-3 9-3 10-4 9-3
Nk Vel 400 267 200 160 133 114 178 133
100 Ps .031 .014 .008 .005 .003 .003 .006 .003
Throw 17-6 15-5 13-5 12-4 11-4 11-4 13-4 11-4
Nk Vel 500 333 250 200 167 143 125 222 167
125 Ps .049 .022 .012 .008 .005 .004 .003 .010 .005
Throw 20-7 17-6 16-5 15-5 14-5 13-5 12-4 15-5 14-5
Nk Vel 400 300 240 200 171 150 267 200
150 Ps .031 .018 .011 .008 .006 .004 .014 .008
SGLF
Throw 20-7 18-6 16-6 15-5 15-5 14-5 17-6 15-5 20-25
Nk Vel 350 280 234 200 175 311 233
175 Ps .025 .016 .011 .008 .006 .019 .011
Throw 20-7 18-6 17-6 16-5 15-5 19-7 17-6
Nk Vel 400 320 267 229 200 356 267
200 Ps .031 .020 .014 .010 .008 .025 .014
Throw 22-8 20-7 19-7 18-6 17-6 21-7 19-7
Nk Vel 500 400 333 286 250 444 333
250 Ps .049 .031 .022 .016 .012 .055 .031
Throw 25-9 23-8 22-8 21-7 20-7 27-10 25-9
Nk Vel 480 400 343 300 400
300 Ps .061 .042 .031 .018 .042
Throw 29-10 27-10 26-7 22-8 27-10
Nk Vel 467 400 350 467
350 Ps .055 .041 .024 .055
Throw 30-11 29-10 25-9 30-11
Nk Vel 457 400
400 Ps .051 .031
Throw 31-11 27-10
Nk Vel 450
25-30
450 Ps .049
Throw 32-10
Nk Vel 500
500 Ps .059
Throw 34-12
REGISTERS
GRILLES &
MODEL SGLF
CFM 15 x 9 18 x 9 21 x 9 24 x 9 12 x 12 15 x 12 18 x 12 21 x 12 24 x 12 NC
Nk Vel 107 100
100 Ps .002 .002
Throw 10-4 10-4
SECURITY GRILLES
Nk Vel 133 111 125 100
125 Ps .003 .002 .003 .002
Throw 13-4 12-4 12-4 11-4
Nk Vel 160 133 114 100 150 120 100
150 Ps .005 .003 .003 .002 .004 .003 .002
Throw 14-5 13-5 13-4 12-4 14-5 13-5 12-4
Nk Vel 187 156 133 117 175 140 117 100
175 Ps .007 .005 .003 .003 .006 .004 .003 .002
Throw 16-6 15-5 14-5 14-5 16-5 14-5 14-5 13-4
Nk Vel 213 178 152 133 200 160 133 114 100
200 Ps .009 .006 .005 .003 .008 .005 .003 .003 .002
SGLF
Throw 17-6 16-6 16-5 15-5 18-6 16-6 15-5 14-5 13-5 20-25
Nk Vel 267 222 190 167 250 200 167 143 125
250 Ps .020 .014 .010 .008 .012 .008 .005 .004 .003
Throw 23-8 22-8 20-7 20-5 20-7 18-6 17-6 16-6 16-5
Nk Vel 320 267 229 200 300 240 200 171 150
300 Ps .027 .019 .014 .011 .018 .011 .008 .006 .004
Throw 25-9 24-8 23-8 22-8 22-8 21-7 20-7 19-7 18-6
Nk Vel 373 320 267 233 350 280 233 200 175
350 Ps .035 .027 .018 .014 .031 .020 .014 .110 .008
Throw 28-10 25-9 25-9 24-8 27-10 25-9 24-8 23-8 22-8
Nk Vel 427 373 305 267 400 320 267 229 200
400 Ps .045 .035 .023 .018 .039 .025 .018 .013 .010
Throw 30-11 28-10 27-9 26-9 30-10 27-10 26-9 24-9 23-8
Nk Vel 480 400 343 300 450 360 300 257 225
450 Ps .055 .038 .028 .022 .049 .031 .022 .016 .012
Throw 32-11 31-11 29-10 28-10 32-11 29-10 28-10 26-9 25-9
Nk Vel 444 381 333 500 400 333 286 250
500 Ps .047 .034 .026 .059 .038 .026 .019 .015
Throw 33-11 31-11 30-10 34-12 31-11 30-10 28-10 27-9
Nk Vel 489 419 367 440 367 314 275
25-30
550 Ps .047 .034 .026 .045 .031 .023 .018
Throw 33-11 31-11 30-10 33-12 31-11 30-10 28-10
Nk Vel 457 400 480 400 343 300
600 Ps .048 .037 .053 .037 .027 .021
Throw 35-12 33-12 35-12 33-12 31-11 30-10

REGISTERS
GRILLES &

MODEL SGLF
CFM 21 x 9 24 x 9 12 x 12 15 x 12 18 x 12 21 x 12 24 x 12 NC
Nk Vel 495 433 433 371 325
650 Ps .050 .042 .037 .027 .021
Throw 37-13 35-12 33-12 31-11 30-10
SECURITY GRILLES
Nk Vel 467 467 400 350

700 Ps .049 .042 .031 .024
Throw 37-13 35-12 33-12 32-11
Nk Vel 500 500 429 375
20-25
750 Ps .055 .049 .036 .027
Throw 38-13 37-13 35-12 33-12
Nk Vel 457 400
800 Ps .041 .031
Throw 36-13 35-12
Nk Vel 486 425
850 Ps .046 .035
SGLF
Throw 38-13 36-13

Nk Vel 450
900 Ps .044
Throw 39-14
Nk Vel 475
25-30
950 Ps .049
Throw 40-14
Nk Vel 500
1000 Ps .054
Throw 42-15
REGISTERS
GRILLES &
MODEL SGLF
Nk Vel 128 107
200 Ps .003 .002
Throw 15-5 14-5
SECURITY GRILLES
Nk Vel 160 134
250 Ps .005 .004
Throw 17-6 15-5
Nk Vel 192 160 137 120 133 114 100
300 Ps .007 .005 .004 .003 .003 .003 .002
Throw 19-7 18-6 17-6 16-6 17-6 16-6 15-5
Nk Vel 224 187 160 140 156 133 117
350 Ps .010 .007 .006 .004 .005 .004 .003
Throw 21-7 20-7 19-6 18-6 19-6 19-6 17-6
Nk Vel 256 213 183 160 178 152 133 131 114 100
400 Ps .013 .009 .007 .005 .006 .005 .003 .003 .003 .002
SGLF
Throw 23-8 22-8 21-7 20-7 21-7 20-7 19-7 19-7 18-6 17-6 20-25
Nk Vel 288 240 206 180 200 171 150 147 129 113
450 Ps .017 .012 .009 .007 .008 .006 .004 .004 .004 .003
Throw 25-9 24-8 22-8 21-7 23-7 21-7 20-7 21-7 19-6 19-6
Nk Vel 320 267 229 200 222 190 167 163 143 125
500 Ps .020 .014 .010 .008 .010 .007 .005 .005 .004 .003
Throw 28-10 26-9 24-9 23-8 24-8 23-8 22-8 22-8 21-7 20-7
Nk Vel 352 294 252 220 245 210 184 180 157 138
550 Ps .025 .017 .013 .010 .012 .009 .007 .006 .005 .004
Throw 29-10 27-9 26-9 24-8 25-9 25-8 24-9 23-8 22-7 21-7
Nk Vel 384 320 274 240 267 229 200 196 171 150
600 Ps .029 .020 .015 .011 .014 .010 .008 .007 .006 .004
Throw 31-11 29-10 28-10 26-9 27-10 26-9 25-9 25-9 23-8 22-8
Nk Vel 416 347 297 260 289 248 217 213 186 163
650 Ps .034 .024 .018 .013 .017 .012 .010 .009 .007 .005
Throw 33-11 31-10 29-10 27-9 28-10 27-9 26-9 26-9 24-9 23-8
Nk Vel 448 373 320 280 311 267 233 229 200 175
700 Ps .039 .027 .020 .015 .019 .014 .011 .010 .008 .006
Throw 34-12 32-11 31-11 29-10 30-11 29-10 27-10 27-10 26-9 25-9
Nk Vel 400 343 300 334 286 250 245 215 188
25-30
750 Ps .036 .027 .020 .022 .016 .013 .012 .009 .007
Throw 36-12 34-12 33-11 31-11 30-10 28-10 28-10 27-9 26-9
Nk Vel 427 366 320 356 305 267 261 229 200
800 Ps .045 .033 .025 .025 .018 .014 .013 .010 .008
Throw 38-13 36-13 35-12 33-12 32-11 30-11 30-10 29-10 27-10

REGISTERS
GRILLES &

MODEL SGLF
CFM 18 x 15 21 x 15 24 x 15 18 x 18 21 x 18 24 x 18 21 x 21 24 x 21 24 x 24 NC
Nk Vel 454 389 340 378 324 299 278 243 213
850 Ps .050 .037 .028 .032 .023 .018 .017 .013 .010
Throw 39-13 37-13 36-12 37-13 35-12 33-11 33-11 31-11 30-10
SECURITY GRILLES
Nk Vel 480 411 360 400 343 330 294 257 225
900 Ps .055 .041 .031 .038 .028 .022 .021 .016 .012
Throw 41-14 39-14 37-13 39-14 37-13 35-12 35-12 33-12 32-10
Nk Vel 380 422 362 332 311 272 238
950 Ps .035 .047 .035 .027 .026 .020 .015
Throw 39-13 41-14 39-14 37-13 37-13 32-11 34-11
Nk Vel 457 400 444 381 333 327 286 250
20-25
1000 Ps .049 .038 .055 .041 .031 .030 .023 .018
Throw 42-15 40-14 44-15 42-15 40-14 40-14 38-13 36-13
Nk Vel 440 419 367 360 315 275
1100 Ps .045 .048 .037 .036 .027 .021
SGLF
Throw 42-15 44-15 42-15 42-14 40-14 38-13

Nk Vel 480 457 400 392 343 300
1200 Ps .053 .055 .042 .041 .031 .024
Throw 45-16 46-16 44-16 44-15 42-15 40-14
Nk Vel 467 457 400 350
1400 Ps .055 .053 .041 .031
Throw 49-17 48-17 46-16 44-15
Nk Vel 457 400
1600 Ps .051 .039
Throw 50-17 48-17
Nk Vel 450
25-30
1800 Ps .049
Throw 51-18
Nk Vel 500
2000 Ps .049
Throw 51-1*8
PERFORMANCE NOTES FOR SERIES SGLF

DEFINITION OF UNITS
REGISTERS
GRILLES &
*AIRE
METAL
MODEL SG
SGDB
Tag:
Series : Submittal No: SGDB

Maximum
The SGDB Security Barrier
barrier grille Grilles for openings between secure and
is designed
Steel
non-secured areas that are restricted. The bars are mounted in a
Model: SGDB Duct Bars Welded in Sleeve - 4-12" or 13-16" Sleeve Size
sleeve for installation in a wall. Duct connections can be made at both
ends. The SGDB is available in steel (Model SGDB) or stainless steel
SECURITY GRILLES
(Model SGDB-SS) construction.
3/16" thick sleeve
Bars are 1/2" round on maximum 6" centers
Two angle frames are included, one welded and the other shipped loose.
3
1 x 1 x 16
9 Angle Frame
Duct + 2 16
One Shipped Loose
6" Max 23
4
Skip Weld
SGDB
Number SGDB
Duct Duct
9 Size
+ 2 16
10 Gauge Sleeve
1"
Submittal
2 Dia. Bar Welded to Sleeve 6" O.C. Sleeve Length As Specified
1. Available Finishes 2. Construction Details

Standard Finish: Neck Sizes available as listed. For larger units,
01 White. contact Sales Department.
Note: Contact Factory for other finishes. Sleeve is 3/16" steel. Bars are 1/2" round on
maximum 6" centers vertical and horizontal.
Two angle frames included, one welded to
sleeve, one shipped loose.
Notes: ( check if provided) Dimensions are in inches
Cad File Number: SGDB-93 Date: 05/31/2002 Submittal No. SGDB Page: 1 of 1
2001 Metal Industries, Inc. Clearwater, FL All Rights reserved. Printed in U.S.A. (727) 441-2651 Fax (727)443-7167 www.metalaire.com [email protected]

REGISTERS
GRILLES &
SERIES SGDB SPECIFICATIONS

BARRIER GRILLE STEEL MODEL SGDB Performance Specification
Barrier grille shall be model SGDB manufactured by The manufacturer shall provide published performance
METALAIARE. Units shall be barrier grilles constructed data. Data shall be tested in accordance to ANSI/
with 1/2" diameter bars on 6" center mounted in a ASHRAE Standard 70-2006.
3/16" steel sleeve. Units to include two angle frames
Paint Specification
SECURITY GRILLES
1"x 1" x 3/16", one welded and one shipped loose.

The units shall be the size and quantity as outlined in the Process shall be anodic electro-deposition using an
plans and specifications. anodic acrylic paint. Units shall undergo pre-treatment

SGDB
REGISTERS
GRILLES &
SGDB MODEL NUMBER SPECIFICATION
MODELS SGDB, SDDB-SS, SGDF, SGDF-SS, SGDFF, SGDFF-SS
Neck
Model 6 8 9 10 12 14 15 16 18 20 21 22 24 Sleeve
SGDB 6 X X X X X X X X X X X X X
SDDB-SS 8 X X X X X X X X X X X X
SECURITY GRILLES
SGDF 9 X X X X X X X X X X X
SGDF-SS 10 X X X X X X X X X X
SGDFF 12 X X X X X X X X X
SGDFF-SS 14 X X X X X X X X 4 - 16
15 X X X X X X X
16 X X X X X X
18 X X X X X
20 X X X X
21 X X X
22 X X
24 X
SGDB
Available Finishes
Standard
01 White
Optional
02 Satin Silver
03 Black
28 Custom Color

REGISTERS
GRILLES &
SGDB MODEL NUMBER SPECIFICATION

Neck
Model 26 28 30 32 34 36 38 40 42 44 46 48 Sleeve
SGDB 6 X X X X X X X X X X X X
SECURITY GRILLES
SGDF 9 X X X X X X X X X X X X
SGDF-SS 10 X X X X X X X X X X X X
SGDFF 12 X X X X X X X X X X X X
SGDFF-SS 14 X X X X X X X X X X X X
21 X X X X X X X X X X X X 4 - 16
SGDB
34 X X X X X X X X
36 X X X X X X X
38 X X X X X X
40 X X X X X
42 X X X X
44 X X X
46 X X
48 X
Available Finishes
Standard
01 White
Optional
02 Satin Silver
03 Black
28 Custom Color
REGISTERS
GRILLES &
MODEL SGDF
The SHDF barrier grille is designed for openings between secure
and non-secured areas that are restricted. The SGDF is mounted
in a flat frame and is available in steel (SGDF) or stainless steel
(SGDF-SS) construction.
SECURITY GRILLES
Mounting frame is 10-gauge steel and 2" wide
SGDF

REGISTERS
GRILLES &
SERIES SGDF SPECIFICATIONS

BARRIER GRILLE FLAT FRAME Performance Specification
STEEL SGDF The manufacturer shall provide published performance
Barrier grille shall be model SGDF manufactured by data. Data shall be tested in accordance to ANSI/
METALAIRE. Units shall be barrier grilles constructed with ASHRAE Standard 70-2006.
1/2" diameter bars on 6" center welded into 3/16" sleeve.
Paint Specification
SECURITY GRILLES
The units shall be mounted into a 10-gauge flat frame

that is 2" wide. Process shall be anodic electro-deposition using an

SGDF
REGISTERS
GRILLES &
SGDF MODEL NUMBER SPECIFICATION
Neck
Model 6 8 9 10 12 14 15 16 18 20 21 22 24 Sleeve
SECURITY GRILLES
15 X X X X X X X
16 X X X X X X
18 X X X X X
20 X X X X
21 X X X
22 X X
24 X
SGDF
Available Finishes
Standard
01 White
Optional
02 Satin Silver
03 Black
28 Custom Color

REGISTERS
GRILLES &

Neck
Model 26 28 30 32 34 36 38 40 42 44 46 48 Sleeve
SECURITY GRILLES
21 X X X X X X X X X X X X 4 - 16
SGDF
34 X X X X X X X X
36 X X X X X X X
38 X X X X X X
40 X X X X X
42 X X X X
44 X X X
46 X X
48 X
Available Finishes
Standard
01 White
Optional
02 Satin Silver
03 Black
28 Custom Color
REGISTERS
GRILLES &
MODEL SGDFF
The SGDFF barrier grille is designed for openings between secure and
non-secured areas. The SGDFF is mounted in a flanged frame and is
available in steel (SGDFF) or stainless steel (SGDFF-SS) construction.
SECURITY GRILLES
Flange frame is 10-gauge steel and 2" wide
SGDFF

REGISTERS
GRILLES &
SERIES SGDFF SPECIFICATIONS

BARRIER GRILLE FLANGE FRAME STEEL Performance Specification
MODEL SGDFF The manufacturer shall provide published performance
Barrier grille shall be model SGDFF manufactured by data. Data shall be tested in accordance to ANSI/
METALAIRE. Units shall be barrier grilles constructed with ASHRAE Standard 70-2006.
1/2" diameter bars on 6" center welded into 3/16" sleeve.
Paint Specification
SECURITY GRILLES
The units shall be mounted into a 10-gauge flanged frame

that is 2" wide. Process shall be anodic electro-deposition using an

SGDFF
REGISTERS
GRILLES &
SDGFF MODEL NUMBER SPECIFICATION
Neck
Model 6 8 9 10 12 14 15 16 18 20 21 22 24 Sleeve
SECURITY GRILLES
15 X X X X X X X
16 X X X X X X
18 X X X X X
20 X X X X
21 X X X
22 X X
24 X
SGDFF
Available Finishes
Standard
01 White
Optional
02 Satin Silver
03 Black
28 Custom Color

REGISTERS
GRILLES &

Neck
Model 26 28 30 32 34 36 38 40 42 44 46 48 Sleeve
SECURITY GRILLES
21 X X X X X X X X X X X X 4 - 16
SGDFF
34 X X X X X X X X
36 X X X X X X X
38 X X X X X X
40 X X X X X
42 X X X X
44 X X X
46 X X
48 X
Available Finishes
Standard
01 White
Optional
02 Satin Silver
03 Black
28 Custom Color
REGISTERS
GRILLES &
SECURITY GRILLE OPTIONS
AND ACCESSORIES

AND ACCESSORIES
Steel Lattice / Perforated Grille Face Only
Model SGLFO-13 Steel Lattice Grille Face Only (A = 13/16" X 13/16" Holes )
Model SGLFO-10 Steel Lattice Grille Face Only (A = 1" X 1" Holes )
Face View
A B
5/16"
B = 3/16"
Option
NSH
No Screw
Holes
1/2"
12 Gauge
Listed Size + 2"
Model SGRPO Steel Perforated Grille Face Only

( 5/16" Holes On 7/16" Centers Staggered )
Model SGRPO-SR Steel Perforated Grille Face Only
Option SGRPO-SR Face View

SGRPO Face View
SH
Screw
Holes
5/16" Holes 3/16" Holes

On On
7/16" Centers 9/32" Centers
Staggered Staggered
10 Gauge
Listed Sizes + 2" 3/16" Plate Listed Sizes + 2"

REGISTERS
GRILLES &
Aluminum Lattice / Perforated Face Grille

Model SGLFO-AL-13 Aluminum Lattice Grille Face Only (A = 13/16" X 13/16" Holes )
Model SGLFO-AL-50 Aluminum Lattice Grille Face Only (A = 1/2" X 1/2" Holes )
Model SGLFO-AL-75 Aluminum Lattice Grille Face Only (A = 3/4" X3/4" Holes )
Model SGLFO-AL-10 Aluminum Lattice Grille Face Only (A = 1" X 1" Holes )
Face View
AND ACCESSORIES
A B
5/16"
B = 3/16"
Option
NSH
No Screw
Holes
1/2"
.125 Plate Aluminum
Listed Size + 2"
Model SGRPO-AL Aluminum Perforated Grille Face Only

Model SGRPO-SR-AL Aluminum Perforated Grille Face Only
Option
SGRPO-AL Face View SGRPO-SR-AL Face View
SH
Screw
Holes

On On
Staggered Staggered
Listed Sizes Listed Sizes

.125 Aluminum Plate
+ 2" + 2"
REGISTERS
GRILLES &
Steel Lattice / Perforated Grille Face Only
Model SGLFO-SS-13 Stainless Steel Lattice Grille Face Only (A = 13/16" X 13/16" Holes )
Model SGLFO-SS-10 Stainless Steel Lattice Grille Face Only (A = 1" X 1" Holes )

Face View
AND ACCESSORIES
A B
5/16"
B = 3/16"
Option
NSH
No Screw
Holes
1/2"
10 Gauge
Listed Size
+ 2"
Model SGRPO-SS Stainless Steel Perforated Grille Face Only

Model SGRPO-SR-SS Stainless Steel Perforated Grille Face Only
SGRPO-SS Face View Option SGRPO-SR-SS Face View

SH
Screw
Holes

On On
Staggered Staggered
10 Gauge
+ 2" + 2"

DS Debris Screen
OBD Damper (Steel) DS Debris Screen
OBDA Damper (Aluminum)
REGISTERS
GRILLES &


SBR SAB LSA
Security Bars Steel Anchor Bars Loose Steel Angles
(Installed in the sleeve) (welded on sleeve)
SAB SBR
OBD or OBDA OBD or SAB
OBDA LSA (showed SBR
SABLSA-4) SBR LSA
LSA (showed (showed LSA-4)
LSA-4)
AND ACCESSORIES
OBD or OBDA SAB SBR LSA (showed LS

OBD or OBDA SAB SBR LSA (showed LSA-4)
3
Rear 1 1 4pcs. 1" x 1" x 16
Operated 2 3Diameter 3" 2 Diameter Bar On 2 Long; 2 Short Dimension
Long For Concrete1 Maximum 6" Centers 3
1 Rear 1 1
Opposed 4pcs. 1" x 1" xBlock
16 Or Brick Wall. With Mounting Holes and
2 Diameter Bar On Blades2 Diameter 3"2 Long; 2 Short Welded To Sleeve 4pcs. 1" x 1" x 16
2 Diameter 3" Operated Dimension 2 Diameter Bar On 2 Long; 2 Short Dimension
Bolts (Shipped Loose)
Long For Concrete Maximum 6" Centers Long For Concrete Maximum 6" Centers
Opposed With Mounting Holes and With Mounting Holes and
Block Or Brick Wall. Welded To Sleeve Block Or Brick Wall. Welded To Sleeve
Blades Bolts (Shipped Loose) Bolts (Shipped Loose)
BSA WSA WAF
Detail A
3
Rear 1 1 3 4pcs. 1" x 1" x 16
WSA TR
BSA WAF Rear WSA
Operated WSA 1
2Detail A 3"
Diameter
2 Diameter
WAF 3"
B Concrete
1
WAF 2 Diameter Bar On 4pcs. 1" x 1" x 16 2 Long; 2 Short Dimens
2 Diameter Bar On
MaximumDetail A 2 Long; 2 Short Dimension
6" Centers
Operated Opposed A Long For
Long For ConcreteBlock Or Brick Wall.
C
Maximum 6" Centers With Mounting Holes an
Square to Round Transition Opposed Blades Welded Steel Angles
Block Or Brick Wall.
Welded Angle Frame
Welded To Sleeve
Welded To Sleeve With Mounting Holes and
Bolts (Shipped Loose)
Blades Detail
Bolts B
(Shipped Loose)
B A C (Welded Bto sleeve) C
BSA Detail B WSA WAFDetail B

BSA1" x 1" x 16
3 WSA 3 3WAF Detail A
Angles Bolted
1" x 1" x 16
Angles Welded
1" x 1" x 16 Detail C Detail A
Welded Angle Flange
To Sleeve To Sleeve (Shipped Loose)
A B C
3 3 3 1 C t
A 3
ti 1" xD1" tx 16
il 3B C
1" x 1" x 16 1" x 1" x 161" x 1" x 16 1" x 1" x 16
Angles Welded Angles Bolted Angles Welded Detail C Detail C Detail B
Welded Angle Flange Welded Angle Flange
To Sleeve To Sleeve(Shipped Loose) To Sleeve Detail B
(Shipped Loose)
1 C t ti D t il
3 3 3
3 1" x 1" x 16 3 1" x 1" x 16 3 1" x 1" x 16
1" x 1" x 16 Angles Bolted 1" x 1" x 16 Angles Welded 1" x 1" x 16 Detail C
Angles Bolted Angles Welded
Welded Angle Flange Detail C
To Sleeve To Sleeve Welded Angle Flange
(Shipped Loose)
To Sleeve To Sleeve (Shipped Loose)
1 C t ti D t il
1 C t ti D t il
DS
Debris Screen

OBD or OBDA SAB SBR LSA (showed LSA-4)
3
Rear 1 1 4pcs. 1" x 1" x 16
Operated 2 Diameter 3" 2 Diameter Bar On 2 Long; 2 Short Dimension
Long For Concrete Maximum 6" Centers
Opposed With Mounting Holes and
Block Or Brick Wall. Welded To Sleeve
Blades Bolts (Shipped Loose)
BSA WSA WAF

Detail A
GR340 A B C
Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
Detail B
REGISTERS
GRILLES &
GRILLES AND
REGISTERS ACCESSORIES
GRILLES AND
L9
PAGE 343
Square/Rectangular Equalizing Grid
OBDA
PAGE 343
Aluminum Opposed Blade Damper
OBD
PAGE 343
Steel Opposed Blade Damper
TR
PAGE 343
Square to Round Transition
TR DEEP
PAGE 343
Deep Square to Round Transitions
PF
PAGE 344
Plaster Frame

REGISTERS
GRILLES &
TBPF
PAGE 340
T-bar Plaster Frames permit installation
GRILLES AND
LIPF
PAGE 340
Lay-in Plaster Frame
REGISTERS
GRILLES &
MODEL L9
Model L9 Square/Rectangular Equalizing Grid
Designed to provide uniform airflow in branch ducts
Pre-tensioned blades adjust individually
GRILLES AND
MODEL OBDA/OBD
Model OBDA/OBD square/rectangular opposed blade damper
Tapered blades set in a U-channel frame
Opposed blades on 1" centers
Screwdriver slot operator
Aluminum construction, OBDA
Steel construction, OBD
MODEL TR/TR DEEP

Model TR/TR Deep Square to Round Transitions
Available Size
Available for all ducted supply and return diffusers Square Neck Size Round Neck Size
Provide economical means of adapting square neck diffusers 6x6 4, 5 & 6
to round neck connections 8x8 5, 6, 7 & 8
TR Deep transitions provide additional depth to accommodate 9x9 5, 6, 7, 8 & 9
some dampers 10 x 10 5, 6, 7, 8, 9 & 10
12 x 12 5, 6, 7, 8, 9, 10, 11 & 12
14 x 14 5, 6, 7, 8, 9, 10, 11, 12 & 14
15 x 15 5, 6, 7, 8, 9, 10, 11, 12, 14 & 15
16 x 16 5, 6, 7, 8, 9, 10, 11, 12, 14, 15 & 16
18 x 18 5, 6, 7, 8, 9, 10, 11, 12, 14, 15, 16 & 18
22 x 22 5, 6, 7, 8, 9, 10, 11, 12, 14, 15, 16, 18, 20 & 22

REGISTERS
GRILLES &
MODEL TBPF
Model TBPF T-bar Plaster Frames permit installation of T-bar
frame style ceiling diffusers into plaster frame or gypsum
ceilings, and are available in standard T-bar sizes. Available Sizes (TBPF & STBPF Models)
Converts T-bar frame to Surface Mount Nominal Overall
Available in aluminum, TBPF, or steel, STBPF, construction

GRILLES AND
12 x 12 13 3/16 x 13 3/16
24 x 12 25 3/16 x 13 3/16
24 x 24 25 3/16 x 25 3/16
36 x 24 37 3/16 x 25 3/16
36 x 36 37 3/16 x 37 3/16
48 x 24 49 3/16 x 25 3/16
48 x 48 49 3/16 x 49 3/16
13 x 13 14 3/16 x 14 3/16
MODEL PF
Model PF sidewall mounted plaster frame provides a uniform
opening in sidewall to accommodate grilles and registers
MODEL LIPF LIPF Lay-In Aluminum Plaster Frame ( Used with -1 Units )
SLIPF Lay-In Steel Plaster Frame (Used with -1 Units)
Face View
Ceiling Opening = Listed Size + 2 1/2"

Model LIPF permits installation of a grille or register into a 1 1/8"
Listed Size + 2 1/4"

plaster or gypsum ceiling type. Listed Size
+ 1 1/4"
Plaster Frame ( Used with -1 Units ) Face View 1 5/8"
ster Frame (Used with -1 Units)
g = Listed Size + 2 1/2" 5/32 "

1 1/8"
d Size + 2 1/4" 5/8"

LIPF / SLIPF Model List
3/4"
+ 1 1/4" + 3 1/8" Hanger Detail
1 5/8" 4002-1 42F-1 CC5S-1 RPF-1
5/8" 1"
4002R-1 4500-1 L Series SRH-1
4002RS-1 4538-1 RH-1 SRHF-1 2"
5/8"
4002S-1 CC1-1 RHE-1 SRP-1
3/4"
Hanger Detail
4004-1 CC15-1 RHEF-1 SRPF-1
5/8" 1" 4004S-1 CC5-1 RHF-1 V Series
41F-1 CC5F-1 RP-1
2"
CEILING DIFFUSERS
The METALAIRE line of ceiling diffusers is designed for flexibility in application.
This series covers a full range of ceiling diffusers which include square face cone,
louvered face, concentric supply/return, modular, perforated, round and VAV diffusers.
Square face cone diffusers are the most popular and efficient of the
ceiling diffusers. The square cone diffuser provides a true 360 radial
horizontal air flow pattern.
PAGE 2
Louvered face diffusers provide an aesthetically pleasing solution
SQUARE
for applications requiring large volumes of air at low sound levels
and low pressure drops. These units are available in 1, 2, 3 and
4-way air pattern variations that are virtually limitless due to the
CEILING
unique assembly of these diffusers. PAGE 29
CEILING DIFFUSERS
Concentric supply/return diffusers provide an aesthetically
pleasing yet functional solution to Roof Top package single outlet air
distribution requirements. The high induction design ensures a true
DIFFUSERS 5700
horizontal air pattern and rapid mixing of room and primary air. PAGE 90
Perforated ceiling diffusers are designed to provide a smooth, even

appearance that blends into the ceiling. Perforated supply diffusers
are available with adjustable pattern controllers on either the face or
neck or modular cores which provide an excellent air pattern. PAGE 105
Round ceiling diffusers are available in a broad range of sizes and

models from the economical to industrial and architectural. These
units are typically installed in sheet rock or exposed duct and are
available with adjustable deflectors that allow the option for either
horizontal or vertical flow. These units are an excellent choice for
gymnasiums, industrial facilities and large retail outlets. PAGE 181
VAV diffusers are designed to provide individual VAV control at the

individual diffuser level. PAGE 203
Accessories for ceiling diffusers include a complete line of surface-

mounting accessories and air volume dampers. PAGE 212
2013 Metal Industries, Inc. CD1

SQUARE CEILING DIFFUSERS
MODELS 5700 / 5700A MODELS 5800 / 5800A
DIFFUSERS
CEILING
MODEL 5750 MODEL PHENOMENATOR
Models 5700 / 5700A 2 Cone diffusers are designed to efficiently handle

cooling temperature differentials of 1820F at ceiling heights of 8' to
10'. The round neck to square face design provides a uniform 360 fixed
horizontal air diffusion pattern. For applications requiring a vertical air flow,
the 5700A adjustable model employs movable air deflecting vanes which will
provide vertical downward airflow. PAGE 3
Models 5800 / 5800A 3 Cone diffusers are designed to efficiently handle

cooling temperature differentials of 1820F at ceiling heights of 8' to
10'. The round neck to square face design provides a uniform 360 fixed
horizontal air diffusion pattern. For applications requiring a vertical air flow,
the 5800A adjustable model employs movable air deflecting vanes which will
provide vertical downward airflow. PAGE 10
Model 5750 offers the architect the often preferred appearance of a single
air diffusion panel. The diffuser is designed to efficiently handle cooling
temperature differentials of 18-20F at ceiling heights of 8' to 10'. PAGE 17
Model Phenomenator has the highest induction ratio of any commercial air
diffuser available. It is an excellent selection for providing exceptional comfort,
especially in executive offices, conference rooms and board rooms. The
Phenomenator is designed for applications calling for minimal temperature
differences in a space. PAGE 23
CD2 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
MODEL 5700
Model 5700 diffuser is an excellent choice for applications requiring
equal throw in all directions. It provides a tight horizontal 360
discharge pattern for superior induction and occupant comfort.
DIFFUSERS
The 5700 is fitted with a quick-release 2 cone inner assembly for
CEILING
immediate access to the damper and ease of installation.Submittal: 5700
Available in aluminum, aluminized steel and steel construction
Square Face Diffusers
2Cone - Round
One piece Neck
die formed cones provide a smooth, aerodynamically designed surface with no corner joints
Models:
converted in theAluminized
Can beSteel Steel
field to 3 cone Aluminum
diffuser with the addition of the optional snap58
5700-1 5700-1 AS 5700-1 AL Concealed T-Bar
Available in metric 600mm
5700-6 x 600mm
5700-6 AS Lay-in5700-6 AL Lay in T-Bar
5700-6P 5700-6P AL Lay in T-Bar Panel
Available in adjustable horizontal to vertical discharge Model 5700A
5700-7 5700-7 AS Concealed T-Bar
5700-9 5700-9 AS 5700-9 AL Donn (USG) Ceiling Grid

Easily removable cores with no tools required
Models: 5700-1 ( Steel - Surface Mount - 24 x 24 ) Models: 5700-1 ( Steel - Surface Mount - 12 x 12 )
5700-1 AS ( Aluminized Steel) 5700-1 AS ( Aluminized Steel)
(Surface Mount - 24 x 24 ) (Surface Mount - 12 x 12 )
5700-1 AL ( Aluminum - Surface Mount - 24 x 24 ) 5700-1 AL ( Aluminum - Surface Mount - 12 x 12 )
1
Neck Size - 8
Neck Size - 18 1
Earthquake Tab 14 1
Latch Tabs 4 Spring Loaded Latches
1
3 58 8 31
23
8 5 4
1
14
1 x 23 1 Ceiling Opening Ceiling Opening = 12 x 12
23 4 4
Overall Face Size = 13 x 13
Overall Diffuser = 24 3 3
4 x 24 4 Available Neck Sizes 6 & 8
Available Neck Sizes 6, 8, 10, 12, 14, 15
5700
Models: 5700-6 ( Steel - Lay in T-Bar - 24 x 24 ) Models: 5700-6 ( Steel - Lay in T-Bar - 12 x 12 )
5700-6 AS ( Aluminized Steel) 5700-6 AS ( Aluminized Steel)
(Lay in T-Bar - 24 x 24 ) (Lay in T-Bar - 12 x 12 )
5700-6 AL ( Aluminum - Lay in T-Bar - 24 x 24 ) 5700-6 AL ( Aluminum - Lay in T-Bar - 12 x 12 )
Neck Size - 81
Neck Size - 81 1 41
Earthquake Tab
Latch Tabs
1 3 41
5
Overall Face Size = 23 3

x 23 34 Overall Face Size = 11 34 x 11 34
4
T-Bar Module = 24 x 24 T-Bar Module = 12 x 12

Available Neck Sizes 6, 8, 10, 12, 14, 15 Available Neck Sizes 6 & 8
Model: 5700-6P ( Steel - Lay in T-Bar Panel )

5700-6P AL ( Aluminum - Lay in T-Bar Panel )
1
Neck Size - 8
1
14
13
8
Overall Face Size = 23 3 3

4 x 234
T-Bar Panel = 24 x 24
Available Neck Sizes 6 & 8

Revision: A Date: 11/2013 Dimensions are in Inches Page: 1 of 2
Square Face Diffusers
2 Cone - Round Neck
Models: Steel Aluminized Steel Aluminum
5700-1 5700-1 AS 5700-1 AL Concealed T-Bar
5700-6 5700-6 AS 5700-6 AL Lay in T-Bar
5700-9 5700-9 AS 5700-9 AL Donn (USG) Ceiling Grid
Models: 5700-7 ( Steel - Lay in T-Bar - 24 x 24 )

5700-7 AS ( Aluminized Steel - Lay in T-Bar - 24 x 24 )
Neck Size - 81
Earthquake Tab
Latch Tabs
DIFFUSERS
3 21
CEILING
4 21
Overall Face Size = 23 34 x 23 34

5700-9 AL ( Aluminum - Lay in T-Bar - 24 x 24 )
Neck Size - 81
Earthquake Tab
Latch Tabs
3 21
4 21
5700
23 38 x 23 38

Standard Finish: Accessories Shipped Unattached Available Sizes Only as Listed
01 White G3 Equalizing Grid Available Neck Sizes as Listed
Optional Finish (extra charge): BDS Butterfly Damper
03 Black RSD Radial Shutter Damper
28 Custom Color / Setup Charge BAF Directional Baffles
Accessories Shipped Factory Installed
FGBP Factory Installed R6 Insulation
on Select Sizes and Models

Metal Industries, Inc. Clearwater, FL (727) 441 - 2651 Fax (800) 865 8383 www.metalaire.com [email protected]
Air Diffusers shall be model: Optional for Adjustable Pattern

5700-1 Surface Mount Diffuser shall include adjustable deflector blades located
5700-6 T-bar Lay-in within the cones of the device. Deflectors shall allow
5700-7 Concealed Spline the discharge air to be adjusted to obtain a vertical or
DIFFUSERS
horizontal air pattern.
CEILING
5700-9 Donn Fineline Lay-in
Non-Adjustable, Horizontal Discharge Pattern Optional Dampers and Accessories
5700 manufactured by METALAIRE. BUTTERFLY DAMPER

Units shall be constructed of steel. METALAIRE model BDS aluminum round butterfly type
5700 AS manufactured by METALAIRE. dampers shall be provided. Damper shall consist of
Units shall be constructed of aluminized steel. two butterfly style blades that can be adjusted from full
open to full closed. Damper shall be adjusted with a
5700 AL manufactured by METALAIRE.

screwdriver slot that can be accessed through the face
Units shall be constructed of aluminum.
of the diffuser.
Adjustable Discharge Pattern RADIAL SHUTTER DAMPER
5700A manufactured by METALAIRE. METALAIRE model RSD steel round radial shutter damper
Units shall be constructed of steel. shall be provided. Damper shall consist of gang operated
5700A AS manufactured by METALAIRE. radial blades that slide perpendicular to air flow direction.
Units shall be constructed of aluminized steel. The damper shall be adjusted from full open to full closed.
Damper shall be adjusted with a screwdriver slot that can
5700A AL manufactured by METALAIRE.
be accessed through the face of the diffuser.
Units shall be constructed of aluminum.
Units shall be square with a formed backpan and two EQUALIZING GRID
inner cones. Diffuser shall have the same appearance METALAIRE model G3 aluminum round equalizing
from the face regardless of inlet size. The units grid shall be provided. Equalizing grid shall consist of
shall be the size and quantity as outlined in the 1/2" x 1/2" x 1/2" aluminum cubed core mounting in an
5700
plans and specifications. aluminum frame.
Inlets shall be drawn into the backpan of the diffuser.
Welded inlets are not acceptable. Diffusers shall include Performance Specification
seismic tabs drawn into the backpan. Inner cone The manufacturer shall provide published performance
assemble shall be removable without the aid of tools data. Data shall be tested in accordance to ANSI/
for installation and to access optional damper. Units ASHRAE Standard 70-2006.
requiring tools such as screwdrivers or hex keys to remove
the inner cones are not acceptable. Paint Specification
The bottom cone shall have a removable plug in the center
to allow access to adjust an optional damper. Units shall
include the option to allow a field-installed third optional
cone accessory model Snap-58. Optional third cone shall
be installed into the bottom of the 5700 diffuser without
the use of tools.
Units shall be designed to integrate into the specified
ceiling system.

SQUARE FACE DIFFUSER 2 CONE
Model Available Neck Module Available Finishes
5700-1 Surface Mount - Steel 6 Standard
12 x 12
5700-1 AS Surface Mount - Aluminzed Steel 8 01 White
DIFFUSERS
5700-1 AL Surface Mount - Aluminum 6 Optional

CEILING
5700A-1 Adj. Surface Mount - Steel 8 02 Satin Silver

5700A-1 AS Adj. Surface Mount - Aluminized Steel 10 03 Black
12 24 x 24 28 Custom Color
14 Available Accessories
15 G3 Equalizing Grid
BDS Butterfly Damper
RSD Radial Damper
BAF-1 3-Way Directional Baffle

SNAP-58 5700 to 5800 Conversion Cone
5700
Model Neck Size Module Available Finishes
5700-6 T-bar Lay-in - Steel 6 Standard Finish
12 x 12
5700-6 AS T-bar Lay-in - Aluminized Steel 8 01 White
DIFFUSERS
5700-6 T-bar Lay-in - Steel 6 Optional Finishes
CEILING
5700-6 AS T-bar Lay-in - Aluminized Steel 8 02 Satin Silver
5700-6 AL T-bar Lay-in - Aluminum 10 03 Black
24 x 24
5700A-6 Adj. T-bar Lay-in - Steel 12 28 Custom Color
5700A-6 AS Adj. T-bar Lay-in - Aluminized Steel 14
5700-7 Concealed Spline - Steel 15
5700-7 AS Concealed Spline - Aluminized Steel
5700A-7 Concealed Spline Adj. - Steel Available Accessories

5700A-7 AS Concealed Spline Adj. - Aluminized Steel G3 Equalizing Grid
5700-9 Donn Fineline / Bolt Slot - Steel BDS Butterfly Damper
5700-9 AS Donn Fineline / Bolt Slot - Aluminized Steel RSD Radial Damper
TBPF T-Bar Plaster Frame (-6 Only)
5700
M5700-6 Metric T-bar Lay-in - Steel 6 Standard Finish
M5700-6 AS Metric T-bar Lay-in - Aluminized Steel 8 01 White
M5700-6 AL Metric T-bar Lay-in - Aluminum 10 600mm x Optional Finishes
12 600mm 02 Satin Silver
14 03 Black
15 28 Custom Color
G3 Equalizing Grid
RSD Radial Damper
TBPF T-Bar Plaster Frame

MODEL 5700/5700A
fpm Vn 400 500 600 700 800 900 1000 1200 1400 2000
Listed
Size Neck Size Pv 0.01 0.016 0.022 0.031 0.04 0.05 0.062 0.09 0.122 0.249
CFM 80 100 120 135 155 175 195 235 275 395
DIFFUSERS
Ps 0.021 .033 .048 .061 .080 .102 .127 .184 .253 .521
CEILING
Pt 0.031 .049 .071 .091 .120 .153 .189 .274 .375 .770
6
Throw* 2-3-6 3-4-7 3-5-7 3-5-8 4-6-8 4-6-9 5-7-9 6-7-10 6-8-11 8-9-13
Throw 3-4-6 3-5-7 4-5-7 4-6-8 5-6-8 5-6-9 5-7-9 6-7-10 6-8-11 8-10-13
NC - <15 18 20 23 26 28 33 36 44
12 x 12
CFM 140 175 210 245 280 315 350 420 490 700
Ps .029 .046 .066 .090 .118 .149 .184 .265 .360 .735
Pt .039 .062 .089 .121 .158 .199 .246 .354 .482 .984
8
Throw* 3-4-8 3-5-9 4-6-10 5-7-11 5-8-11 6-8-12 7-9-13 8-10-14 9-11-15 10-13-18
Throw 3-5-8 4-6-9 5-7-10 6-7-11 7-8-11 7-8-12 7-9-13 8-10-14 9-11-15 10-13-18
NC - <15 19 22 25 28 31 36 40 46
CFM 80 100 120 135 155 175 195 235 275 395
Ps .014 .021 .031 .039 .051 .065 .081 .118 .161 .332
Pt .024 .037 .053 .069 .091 .116 .143 .207 .283 .582
6
Throw* 2-2-5 2-3-5 2-4-6 3-4-6 3-4-6 4-5-7 4-5-7 5-6-8 5-6-8 6-7-10
Throw 2-4-7 3-5-8 4-6-9 4-6-10 5-7-10 5-8-11 6-8-12 7-9-13 8-10-14 10-12-17
NC - - - - <15 16 18 23 27 43
24 x 24
CFM 140 175 210 245 280 315 350 420 490 700
Ps .016 .025 .036 .048 .063 .080 .099 .142 .194 .395
Pt .026 .040 .058 .079 .103 .131 .161 .232 .316 .645
8
5700
Throw* 2-3-6 3-4-7 3-5-7 4-6-8 4-6-9 5-6-9 5-7-10 6-7-10 7-8-11 8-10-13
Throw 3-5-10 4-6-11 5-7-12 6-9-13 6-10-14 7-10-15 8-11-16 10-12-17 11-13-18 13-16-22
NC - - - - <15 18 21 26 30 55
MODEL 5700/5700A
fpm Vn 400 500 600 700 800 900 1000 1200 1400 2000
Listed
Size Neck Size Pv 0.01 0.016 0.022 0.031 0.04 0.05 0.062 0.09 0.122 0.249
CFM 220 275 325 380 435 490 545 655 765 1090
DIFFUSERS
Ps .019 .030 .042 .057 .075 .096 .118 .171 .233 .473
CEILING
Pt .029 .046 .064 .088 .115 .146 .181 .261 .355 .722
10
Throw* 3-4-8 3-5-8 4-6-9 5-7-10 5-8-11 6-8-11 7-8-12 8-9-13 8-10-14 10-12-17
Throw 4-6-12 5-8-14 6-9-15 7-11-16 8-12-17 9-13-18 10-14-19 12-15-21 13-16-23 16-19-28
NC - - - <15 16 20 24 30 35 63
CFM 315 395 470 550 630 705 785 940 1100 1570
Ps .021 .033 .046 .063 .083 .104 .129 .185 .253 .515
Pt .031 .048 .069 .094 .123 .154 .191 .274 .375 .765

12
Throw* 3-5-9 4-6-10 5-7-11 6-8-12 7-9-13 7-10-14 8-10-14 9-11-16 10-12-17 12-14-20
Throw 5-7-15 6-9-17 7-11-18 8-13-20 10-15-21 11-16-22 12-17-23 14-18-26 16-20-28 19-23-33
NC - - - <15 19 23 27 33 39 68
24 x 24
CFM 430 535 640 750 855 960 1070 1285 1495 2140
Ps .026 .041 .058 .080 .104 .131 .163 .234 .377 .650
Pt .036 .056 .081 .110 .144 .181 .225 .324 .440 .900
14
Throw* 4-6-11 5-7-12 6-9-13 7-10-14 8-11-15 9-11-16 10-12-17 11-13-18 11-14-20 14-17-24
Throw 6-9-17 7-11-19 8-13-21 10-15-23 11-17-24 13-18-26 14-19-27 17-21-30 19-23-32 22-27-39
NC - * <15 <15 18 23 28 35 40 57
CFM 490 615 735 860 980 1105 1225 1475 1720 2455
Ps .032 .051 .072 .099 .129 .164 .201 .292 .396 .808
Pt .042 .066 .095 .130 .169 .214 .263 .381 .519 1.057
15
5700
Throw* 4-6-11 5-8-13 6-9-14 7-11-15 8-11-16 9-12-17 10-13-18 11-14-20 12-15-21 15-18-25
Throw 6-9-18 8-11-21 9-14-23 11-16-24 12-18-26 14-20-28 15-21-29 18-23-32 20-24-35 24-29-41
NC - - <15 16 22 27 31 39 46 68

DEFINITION OF UNITS
Vn Neck Velocity

MODEL 5800
Model 5800 diffuser is an excellent choice for applications requiring
equal throw in all directions.
Tag:
The tight horizontal 360 discharge
Engineer:
pattern for superior induction and occupant comfort. The 5800
DIFFUSERS
is fitted with a quick-release 3-cone inner assembly for immediate

CEILING
access to the damper and ease of installation
Date: Submitted By:
Available

Square FaceinDiffusers
aluminum, aluminized steel and steel construction Submittal: 5800
3 Cone
One- piece
Round Neck
die-formed cones provide a smooth, aerodynamically designed surface with
Models:no corner
Steeljoints Aluminized Steel Aluminum
5800-1 5800-1
Available in metric 600mm AS Lay-in 5800-1 AL Surface Mount
x 600mm
5800-6 5800-6 AS 5800-6 AL Lay in T-Bar
Available in adjustable horizontal to vertical 5800-6P
5800-6P discharge ALModel
Lay5800A
in T-Bar Panel
5800-7
Easily 5800-7 AS
removable cores with no tools required. Concealed T-Bar
5800-9 5800-9 AS 5800-9AL Donn (USG) Ceiling Grid
Models: 5800-1 ( Steel - Surface Mount - 24 x 24 ) Models: 5800-1 ( Steel - Surface Mount - 12 x 12 )
5800-1 AS ( Aluminized Steel - Surface Mount - 24 x 24 ) 5800-1 AS ( Aluminized Steel - Surface Mount - 12 x 12 )
5800-1 AL ( Aluminum - Surface Mount - 24 x 24 ) 5800-1 AL ( Aluminum - Surface Mount - 12 x 12 )
Neck Size
Earthquake Tab Neck Size - 1 1 1
Latch Tabs
8
4 Spring Loaded -1 14 18 3 21
8
Latches
1 3 21 1
22 43
4
8
1
14
1 x 23 1 Ceiling Opening
23 4 Ceiling Opening = 12 x 12
4
Overall Face Size = 13 x 13
4 x 24 4
Available Neck Sizes 6, 8
5800

Models: 5800-6 ( Steel - Lay in T-Bar - 24 x 24 ) 5800-6 AS ( Aluminized Steel - Lay in T-Bar - 12 x 12 )
5800-6 AS ( Aluminized Steel - Lay in T-Bar - 24 x 24 ) 5800-6 AL ( Aluminum - Lay in T-Bar - 12 x 12 )
Neck Size - 81 1 41
Earthquake Tab Neck Size - 1
8
Latch Tabs
1 81 3 1
1 3 21 2
22 43
4
1
14 Overall Face Size = 11 34 x 11 34
23
3 x 23 3 T-Bar Module = 12 x 12
4 4
T-Bar Module = 24 x 24 Available Neck Sizes 6, 8
Models: 5800-6P ( Steel - Lay in T-Bar Panel - 24 x 24 ) 6" or 8" Inlets Only
5800-6P AL ( Aluminum - Lay in T-Bar Panel - 24 x 24 ) 6" or 8" Inlets Only
1 1
14
Neck Size - 8
Overall Face Size = 23 3 3

4 x 23 4
Available Neck Sizes: 6 & 8
Notes:
Standard Finish: Accessories Shipped Unattached x Available Sizes Only as Listed
CD10 x 01 White x Available
x G3 - Equalizing Grid Metal Industries, Inc. For complete product specifications and submittal Neck Sizes as Listed
data, visit us at www.metalaire.com
Optional Finish (extra charge): x BDS - Butterfly Damper
x 02 Satin Silver x RSD - Radial Shutter Damper
5800-9 5800-9 AS 5800-9AL Donn (USG) Ceiling Grid

Neck Size - 81
Earthquake Tab
Latch Tabs
DIFFUSERS
4 34
CEILING
3 21


Neck Size - 81
Earthquake Tab
Latch Tabs
3 21
4 34
23 38 x 23 38
5800
Models: 5800A-1 ( Steel - Surface Mount )
5800A-1 AS ( Aluminized Steel - Surface Mount )
1 x 23 1
Ceiling Opening = 23 2 2 Pattern Controller
1 Settings For Sizes
Neck Size - 8 11 14/24 and 15/24
Slot Pocked 4
Pattern Controller No. 3
Notes: ( check if provided) Settings For Sizes Outer Cone

6/24, 8/24, 10/24 Cone No. 2 For Vertical
and 12/24 Cone Downward Pattern 4 38

1
8
Ceiling Line For Vertical

Standard Finish: Accessories Shipped
Downward Pattern Unattached
No. 1 Cone For Horizontal
Pattern
1
14
3
8
x Available Sizes Only as Listed
For Horizontal Pattern
01 White G3 - Equalizing Grid Overall Face Size = 25 1 x 25 1
x Available Neck Sizes as Listed
2 2
Optional Finish (extra charge): BDS - Butterfly Damper
03 Black RSD - Radial Shutter Damper
Models: 5800A-6 ( Steel - Lay in T-Bar )
28 Custom Color / Setup AS ( AluminizedBAF
charge
5800A-6 Steel-- Lay
Directional
in T-Bar ) Baffles
1 Pattern ControllerSettings
Neck Size - 18 14
Accessories Shipped No.
Slot Pocked Factory
3 Installed For Sizes 14/24 and 15/24
Pattern Controller Cone
FGBP - Factory Installed No.
Settings For Sizes
6/24, 8/24, 10/24
Outer
Cone
R62 Insulation on
For Vertical 3
44
Select Sizes and Models
and 12/24 Cone Downward Pattern
T-Bar For Vertical

For Horizontal 1 3
By Others Downward Pattern 1 8
No. 1 Cone Pattern 4
For Horizontal Pattern
Revision: A Date: 12/2012 Overall Face Size = 23 3 x 23 3

4 4 Dimensions are in Inches Page: 2 of 2

Air Diffusers shall be model: Optional Dampers and Accessories

5800-1 Surface Mount BUTTERFLY DAMPER
5800-6 T-bar Lay-in
METALAIRE model BDS aluminum round butterfly type
5800-7 Concealed Spline
DIFFUSERS
dampers shall be provided. Damper shall consist of

CEILING
5800-9 Donn Fineline Lay-in two butterfly style blades that can be adjusted from
full open to full closed. Damper shall be adjusted with a
Non-Adjustable, Horizontal Discharge Pattern screwdriver slot that can be accessed through the face
5800 manufactured by METALAIRE. of the diffuser.
Units shall be constructed of steel.
RADIAL SHUTTER DAMPER
5800 AS manufactured by METALAIRE. METALAIRE model RSD steel round radial shutter damper
Units shall be constructed of aluminized steel.
shall be provided. Damper shall consist of gang operated
5800 AL manufactured by METALAIRE. radial blades that slide perpendicular to air flow direction.
Units shall be constructed of aluminum. The damper shall be adjusted from full open to full closed.
Adjustable Discharge Pattern be accessed through the face of the diffuser.
5800A manufactured by METALAIRE.
OPPOSED BLADE DAMPER
Units shall be constructed of steel.
METALAIRE model D3 aluminum or SD3 steel round
5800A AS manufactured by METALAIRE.
opposed blade type dampers shall be provided. Damper
Units shall be constructed of aluminized steel.
shall consist of gang operated blades that can be
5800A AL manufactured by METALAIRE. adjusted from full open to full closed. Damper shall be
Units shall be constructed of aluminum. adjusted with a screwdriver slot that can be accessed
Units shall be square with a formed backpan and through the face of the diffuser.
three inner cones. Diffuser shall have the same
EQUALIZING GRID
appearance from the face regardless of inlet size.
The units shall be the size and quantity as outlined in METALAIRE model G3 aluminum round equalizing
5800
the plans and specifications. grid shall be provided. Equalizing grid shall consist
of 1/2" x 1/2" x 1/2" aluminum cubed core mounting in
Optional for Adjustable Pattern an aluminum frame.
Inlets shall be drawn into the backpan of the diffuser. Performance Specification
Welded inlets are not acceptable. Diffusers shall include
The manufacturer shall provide published performance
seismic tabs drawn into the backpan. Inner cone
assemble shall be removable without the aid of tools
for installation and to access optional damper. Units
requiring tools such as screwdrivers or hex keys to remove
Paint Specification
the inner cones are not acceptable.
The bottom cone shall have a removable plug in the center anodic acrylic paint. Units shall undergo pre-treatment
to allow access to adjust an optional damper. Units shall including a pressurized spray stage using an alkaline
be designed to integrate into the specified ceiling system. cleaner and a de-ionized water rinse.
Diffuser shall include adjustable deflector blades located
within the cones of the device. Deflectors shall allow
the discharge air to be adjusted to obtain a vertical or
horizontal air pattern.
5800-1 Surface Mount - Steel 6 Standard Finish
12 x 12
5800-1 AS Surface Mount - Aluminized Steel 8 01 White
DIFFUSERS
5800-1 AL Surface Mount - Aluminum 6 Optional Finishes
CEILING
5800A-1 Adj. Surface Mount - Steel 8 02 Satin Silver
5800A-1 AS Adj. Surface Mount - Aluminized Steel 10 03 Black
24 x 24
5800A-1 AL Adj. Surface Mount - Aluminum 12 28 Custom Color
14
15

G3 Equalizing Grid
RSD Radial Damper
5800

12 x 12
DIFFUSERS

CEILING

24 x 24
5800A-6 Adj. T-bar Lay-in - Steel 12 28 Custom Color
5800A-6 AS Adj. T-bar Lay-in - Aluminized Steel 14
5800-7 Concealed Spline - Steel 15
5800-7 AS Concealed Spline - Aluminized Steel
5800-9 Donn Fineline / Bolt Slot - Steel Available Accessories
5800-9 AS Donn Fineline / Bolt Slot - Aluminized Steel G3 Equalizing Grid

RSD Radial Damper

5800

M5800-6 AL Metric T-bar Lay-in - Aluminum 10 600mm x Optional Finishes
14 03 Black
15 28 Custom Color
G3 Equalizing Grid
RSD Radial Damper
MODEL 5800/5800A
fpm Vn 400 500 600 700 800 900 1000 1200 1400 2000
Listed
Size Neck Size Pv 0.01 0.016 0.022 0.031 0.04 0.05 0.062 0.09 0.122 0.249
CFM 80 100 120 135 155 175 195 235 275 315
Ps .026 .040 .058 .073 .097 .123 .153 .223 .305 .400
DIFFUSERS
CEILING
Pt .036 .056 .080 .104 .137 .174 .216 .312 .427 .559
6
Throw* 3-4-6 3-5-7 4-5-7 4-6-8 5-6-8 5-6-9 5-7-9 6-7-10 6-8-11 7-9-12
Throw 2-4-6 3-5-7 4-5-7 4-6-8 5-6-8 5-6-9 5-7-9 6-7-10 6-8-11 7-9-12
12 x 12
NC - <15 18 21 24 26 29 33 35 37
CFM 140 175 210 245 280 315 350 420 490 560
Ps .026 .041 .059 .080 .104 .132 .163 .235 .319 .417
Pt .036 .056 .081 .110 .144 .182 .225 .324 .442 .577
8
Throw* 3-5-8 4-6-9 5-7-10 6-8-11 7-8-11 7-9-12 7-9-13 8-10-14 9-11-15 9-11-16
Throw 3-5-8 4-6-9 5-7-10 6-8-11 6-8-11 7-9-12 7-9-13 8-10-14 9-11-15 9-11-16

NC - <15 19 22 25 28 30 34 37 40
CFM 80 100 120 135 155 175 195 235 275 315
Ps .013 .020 .029 .037 .048 .061 .076 .111 .152 .199
Pt .023 .036 .051 .067 .088 .112 .139 .201 .274 .359
6
Throw* 3-4-5 3-4-6 4-5-7 4-5-7 4-5-7 5-6-8 5-6-8 5-6-9 6-7-10 6-7-11
Throw 3-4-7 3-5-8 4-6-9 5-7-10 5-7-10 6-8-11 7-8-11 7-9-13 8-10-14 8-10-15
NC - - - <15 <15 18 21 25 28 31
CFM 140 175 210 245 280 315 350 420 490 560
Ps .014 .022 .032 .043 .056 .071 .088 .126 .172 .225
Pt .024 .038 .054 .074 .096 .122 .150 .216 .294 .384
8
Throw* 4-5-7 5-6-8 5-6-9 5-7-9 6-7-10 6-7-11 6-8-11 7-9-12 8-9-13 8-10-14
Throw 4-5-10 4-7-11 5-8-12 6-9-13 7-10-14 8-10-15 9-11-15 10-12-17 10-13-18 11-14-19
NC - - - <15 17 21 24 30 34 35
CFM 220 275 325 380 435 490 545 655 765 875
Ps .018 .028 .039 .053 .070 .088 .109 .158 .215 .282
Pt .028 .043 .061 .084 .110 .139 .172 .248 .337 .441
10
5800
Throw* 5-6-9 6-7-10 6-8-11 7-8-12 7-9-12 8-9-13 8-10-14 9-11-15 9-12-16 10-12-18
Throw 4-7-12 6-8-14 7-10-15 8-11-16 9-12-17 10-13-18 11-14-19 12-15-21 13-16-23 14-17-24
24 x 24
NC - - - <15 19 23 27 33 38 40
CFM 315 395 470 550 630 705 785 940 1100 1255
Ps .022 .035 .049 .067 .088 .111 .137 .197 .270 .351
Pt .032 .050 .072 .098 .128 .161 .200 .287 .392 .511
12
Throw* 6-7-11 7-8-12 7-9-13 8-10-14 9-11-15 9-11-16 10-12-17 11-13-18 11-14-20 12-15-21
Throw 5-8-15 7-10-16 8-12-18 9-14-19 11-15-21 12-15-22 13-16-23 15-18-25 16-19-27 17-21-29
NC - - <15 16 21 26 30 36 41 43
CFM 430 535 640 750 855 960 1070 1285 1495 1710
Ps .032 .049 .071 .097 .126 .159 .198 .285 .386 .505
Pt .042 .065 .093 .128 .166 .210 .260 .375 .508 .665
14
Throw* 7-9-12 8-10-14 9-11-15 9-12-16 10-12-17 11-13-18 11-14-19 12-15-21 13-16-23 14-17-25
Throw 6-9-17 8-12-19 9-14-21 11-16-22 12-17-24 14-18-25 15-19-27 17-21-29 18-22-32 20-24-34
NC - - <15 17 22 27 32 39 44 47
CFM 490 615 735 860 980 1105 1225 1475 1720 1965
Ps .036 .056 .080 .109 .142 .181 .222 .322 .438 .571
Pt .046 .072 .102 .140 .182 .231 .284 .412 .560 .731
15
Throw* 7-9-13 9-10-15 9-11-16 10-12-17 11-13-19 11-14-20 12-15-21 13-16-23 14-17-25 15-19-26
Throw 7-10-18 8-12-20 10-15-22 12-17-24 13-18-26 15-19-27 17-20-29 18-22-32 20-24-34 21-26-36
NC - - <15 18 23 29 33 41 46 49

DEFINITION OF UNITS
DIFFUSERS

CEILING

Vn Neck Velocity
5800
1 Earthquake Tab
Neck Size - 8 181
Air Diffusion Panel 1
1 18
e Tab Neck Size - 8 1 81 Ceiling Line Mounting Post
Latch Tabs Earthquake Tab Ceiling
1
22 1
22 1 7
Air Diffusion Panel = 9 x 9 8 8
1 Ceiling Ceiling Opening = 12 x 12
8 Air Diffusion Panel = 18 x 18 1
MODEL 5750
Line 8 Overall Face = 13 x 13
Ceiling Opening = 24 x 24
Overall Face = 243
4 x 244
3
Model 5750 offers the architect the often preferred appearance

of a single air diffusion panel. The diffuser is designed to efficiently
handle cooling temperature differentials of 18-20F at ceiling
DIFFUSERS
heights of 8' to 10'.
CEILING
Available in aluminum, aluminized steel and steel construction
Face panel has rounded off corners with a smooth edge 1
Neck Size - 8 Earthquake Tab 1
1 8
1
Neck Size - 8 1 Air Diffusion Panel 1
1 18
One piece die-formed back pan provides a smooth,
8 Mounting Post
Latch Tabs
aerodynamically designed surface with no corner joints
Earthquake Tab Ceiling Line Ceiling
1
Design helps prevent ceiling smudging
1
22 22
1 7
Ceiling
Air Diffusion Panel = 9 x 9 8 8
1 1
Face panel is easily removed
Air Diffusion Panel = 18 x 18 Ceiling Opening = 12 x 12
8 Line
and installed
Ceiling Opening = 24 x 24 without special 8
tools Overall Face = 13 x 13
Overall Face = 243 3
4 x 244
1
1 81

Neck Size - 8
1 Air Diffusion Panel
Neck Size - 8 1 81 Earthquick Tab
1
18
Tab Latch Tabs Mounting Post
T-Bar By Earthquake Tab
Others
1
22 Models: 5 750-1 (Steel - Surface Mount - 24 x 24) 1 Models: 5750-1 (Steel - Surface Mount - 12 x 12)
22
5750-1 AS (Aluminized Steel - Surface Mount - 24 x 24) 5750-1 AS (Aluminized Steel - Surface Mount - 12 x 12)7
Air Diffusion Panel = 9 x 9 8
5750-1 AL (Aliminum - Surface Mount - 24 x 24) 5750-1 AL (Aliminum - Surface Mount
3 -312 x 12)
Air Diffusion Panel = 18 x 18 Overall Face = 11 4 x 11 4
13 31 1 1 T-Bar Module = 12 1x 12 Earthquake Tab
Neck Size - 8
OverallNeck Size
Face -8
= 23 18
Latch Tabs 4 x 23 4 8 Air Diffusion Panel 1 Ceiling
Earthquake Tab 18
T-Bar Module = 24 x 24 Mounting Post
Ceiling Line
1
22
1
22
Ceiling 1 7
Air Diffusion Panel = 18 x 18 1 Air Diffusion Panel = 9 x 9 8 8
Line 8
1 Ceiling Opening = 12 x 12
8 Ceiling Opening = 24 x 24
Overall Face = 13 x 13
Overall Face = 243
4 x 244
3
Models: 5 750-6 (Steel - Lay In T Bar - 24 x 24) Models: 5750-6 (Steel - Lay In T Bar - 12 x 12)
5750-1 AS (Aluminized Steel - Lay In T Bar - 24 x 24) 5750-1 AS (Aluminized Steel - Lay In T Bar - 12 x 12)
5750-1 AL (Aliminum - Lay In T Bar - 24 x 24) 5750-1 AL (Aliminum - Lay In T Bar - 12 x 12)
1
1
Neck Size - 8 1 81 Neck Size - 8 1 81
Latch Tabs Air Diffusion Panel 1
T-Bar By Earthquake Tab Earthquick Tab Mounting Post 18
Others
5750
1 1
22
22
7
Air Diffusion Panel = 18 x 18
Overall Face = 11 34 x 11 34
Overall Face = 23 3 3
4 x 23 4 T-Bar Module = 12 x 12
Models: 5 750-7 (Steel - Concealed T-Bar - 24 x 24) Models: 5750-9 (Steel - Donn Ceiling Grid - 24 x 24)
5750-7 AS (Aluminized Steel - Concealed
1
T 1Bar - 24 x 24) 5750-9 AS (Aluminized Steel - Donn Ceiling Grid - 24 x 24)
5750-7 AL
Latch(Aliminum
Tabs - Concealed T Bar - 1248 x 24)
Neck Size - 8
5750-9 AL (Aliminum
Neck 1 - Donn Ceiling1Grid - 24 x 24)
Size - 8 1
T-Bar By Earthquake Tab 8 Air1Diffusion Panel
1 1
18
Others 1 Earthquick Tab Neck Size - 8 18
Mounting Post
Neck Size - 8 1 81 Narrow T-Bar Latch Tabs
Earthquake Tab
Tab T-Bar By Latch Tabs 1 Narrow T-Bar
Earthquake Tab 22 By Others
1 Others By Others
22
1 1
22
22 1 7
Air Diffusion Panel = 18 x 18 22 Air Diffusion Panel = 9 x 9 8
4 x 23 4 Overall 3
Face = 11Panel 3
Air Diffusion 4 x 11= 418 x 18
AirT-Bar
Diffusion Panel
Module = 18
= 24 x 18
x 24 T-Bar Module = 12 x 123
Overall Face = 23 4 x 23 3
4 x 23 4
4
1 1 81
2013 Metal Industries,
T-Bar By Inc. Latch Tabs
Neck Size - 8
Earthquake Tab Narrow T-Bar Latch Tabs
1
Neck Size - 8 1 81 CD17 Narrow T-Bar
Earthquake Tab By Others
Others By Others
1 1 1
Air Diffusers shall be model: Optional Dampers and Accessories

5750-1 Surface Mount BUTTERFLY DAMPER
5750-6 T-bar Lay-in
METALAIRE model BDS aluminum round butterfly type
5750-7 Concealed Spline
DIFFUSERS

CEILING
5750-9 Donn Fineline Lay-in two butterfly style blades that can be adjusted from full
5750 manufactured by METALAIRE. open to full closed. Damper shall be adjusted with a
Units shall be constructed of steel. screwdriver slot that can be accessed through the face
of the diffuser.
5750 AS manufactured by METALAIRE.
Units shall be constructed of aluminized steel. RADIAL SHUTTER DAMPER
5750 AL manufactured by METALAIRE. METALAIRE model RSD steel round radial shutter damper
Units shall be constructed of aluminum. shall be provided. Damper shall consist of gang-operated
Units shall be square with a formed backpan and a flat radial blades that slide perpendicular to air flow direction.
face panel. Face panel shall project no more than 1/4" The damper shall be adjusted from full open to full closed.
below the ceiling grid or surface. Diffuser shall have the Damper shall be adjusted with a screwdriver slot that can
same appearance from the face regardless of inlet size. be accessed through the face of the diffuser.
The units shall be the size and quantity as outlined in the OPPOSED BLADE DAMPER
METALAIRE model D3 aluminum or SD3 Steel round
Inlets shall be drawn into the backpan of the diffuser. opposed blade type dampers shall be provided. Damper
Welded inlets are not acceptable. Diffusers shall include shall consist of gang operated blades that can be
seismic tabs drawn into the backpan. Face panel shall be adjusted from full open to full closed. Damper shall be
removable without the aid of tools for installation and to adjusted with a screwdriver slot that can be accessed
access optional damper. Units requiring tools to remove through the face of the diffuser.
the inner cones are not acceptable.
EQUALIZING GRID
ceiling system. METALAIRE model G3 aluminum round equalizing
5750
grid shall be provided. Equalizing grid shall consist of

1/2" x 1/2" x 1/2" aluminum cubed core mounting in
an aluminum frame.
Paint Specification

SQUARE FACE DIFFUSER PLAQUE FACE
5750-1 Surface Mount - Steel 6 Standard Finish
12 x 12
5750-1 AS Surface Mount - Aluminized Steel 8 01 White
DIFFUSERS
5750-1 AL Surface Mount - Aluminum 6 Optional Finishes
CEILING
8 02 Satin Silver
10 03 Black
24 x 24
12 28 Custom Color
14
15

G3 Equalizing Grid
RSD Radial Damper
BO-1 3-Way Blank Off
5750

12 x 12
DIFFUSERS

CEILING

24 x 24
5750-7 Concealed Spline - Steel 12 28 Custom Color
5750-7 AS Concealed Spline - Aluminized Steel 14
5750-9 Donn Fineline / Bolt Slot - Steel 15
5750-9 AS Donn Fineline / Bolt Slot - Aluminized Steel
G3 Equalizing Grid
RSD Radial Damper

5750

10 600mm x Optional Finishes
14 03 Black
15 28 Custom Color
G3 Equalizing Grid
RSD Radial Damper
MODEL 5750
fpm Vn 400 500 600 700 800 900 1000 1200 1400 2000
Listed
Size Neck Size Pv 0.01 0.016 0.022 0.031 0.04 0.05 0.062 0.09 0.122 0.249
CFM 80 100 120 135 155 175 195 235 275 315
DIFFUSERS
Ps .009 .014 .021 .024 .032 .041 .051 .075 .104 .137
CEILING
Pt .019 .030 .043 .054 .072 .092 .114 .165 .226 .297
6
Throw* 3-4-7 3-5-7 4-6-8 4-6-9 5-6-9 6-7-10 6-7-10 6-8-11 7-9-12 8-9-13
Throw 3-4-7 4-5-7 4-6-8 5-6-9 5-7-9 6-7-10 6-7-10 7-8-11 7-9-12 8-9-13
NC <15 <15 <15 16 18 21 23 27 31 34
12 x 12
CFM 140 175 210 245 280 315 350 420 490 560
Ps .017 .027 .039 .053 .069 .087 .108 .155 .212 .276
Pt .027 .043 .061 .083 .109 .138 .170 .245 .334 .436

8
Throw* 3-5-9 4-7-10 5-8-11 6-8-11 7-9-12 8-9-13 8-10-14 9-11-15 9-11-16 10-12-17
Throw 4-6-9 5-7-10 6-8-11 7-8-12 7-9-13 8-9-13 8-10-14 9-11-15 10-12-17 10-13-18
NC <15 <15 17 20 22 25 27 31 34 37
CFM 80 100 120 135 155 175 195 235 275 315
Ps .003 .004 .006 .006 .008 .011 .014 .021 .029 .039
Pt .013 .020 .029 .036 .048 .061 .076 .110 .151 .198
6
Throw* 0-1-4 1-2-6 1-2-7 1-3-8 2-4-8 2-5-9 3-5-9 4-7-10 5-8-11 6-9-12
Throw 1-2-5 1-3-6 2-4-7 2-4-8 3-5-9 4-5-9 4-6-10 5-7-11 6-8-12 6-9-13
NC <15 <15 <15 <15 15 18 21 26 31 35
CFM 140 175 210 245 280 315 350 420 490 560
Ps .007 .012 .017 .023 .030 .038 .047 .067 .091 .119
Pt .017 .027 .039 .053 .070 .088 .109 .157 .213 .279
24 x 24
5750
Throw* 1-1-6 1-2-7 1-3-9 2-4-10 3-6-11 3-7-12 4-7-13 6-9-14 7-10-15 8-11-16
Throw 1-2-6 2-4-8 2-5-10 3-6-11 4-6-12 5-7-13 5-8-13 6-10-14 7-11-16 9-12-17
NC <15 <15 <15 17 21 25 28 34 39 42
CFM 220 275 325 380 435 490 545 655 765 875
Ps .016 .025 .034 .047 .061 .078 .096 .139 .190 .249
Pt .026 .040 .056 .077 .101 .128 .159 .229 .313 .409
10
Throw* 1-2-7 1-3-9 2-4-11 2-5-13 3-7-14 4-8-15 5-9-16 7-11-17 9-13-19 10-14-20
Throw 1-3-8 2-5-10 3-6-12 4-7-14 5-8-15 6-9-16 7-10-17 8-12-18 9-14-20 11-15-21
NC <15 15 15 21 26 30 33 37 41 43

MODEL 5750
fpm Vn 400 500 600 700 800 900 1000 1200 1400 2000
Listed
Size Neck Size Pv 0.01 0.016 0.022 0.031 0.04 0.05 0.062 0.09 0.122 0.249
CFM 315 395 470 550 630 705 785 940 1100 1255
DIFFUSERS
Ps .027 .042 .059 .081 .107 .133 .165 .236 .324 .422
CEILING
Pt .037 .058 .082 .112 .146 .183 .227 .326 .446 .581
12
Throw* 1-2-9 1-3-11 2-5-13 3-7-15 4-9-17 5-10-18 6-11-19 8-13-21 10-15-23 12-17-24
Throw 2-4-10 2-6-12 4-7-14 5-8-17 6-10-18 7-11-19 8-12-20 10-14-22 11-17-23 13-18-25
NC <15 <15 17 22 27 30 33 38 42 45
CFM 430 535 640 750 855 960 1070 1285 1495 1710
Ps .031 .049 .069 .095 .124 .156 .194 .280 .378 .495
Pt .041 .064 .092 .126 .164 .206 .256 .370 .501 .655
24 x 24
14
Throw* 1-3-10 2-4-13 2-6-15 3-8-18 4-10-20 6-12-21 7-13-22 10-15-24 12-18-26 14-20-28
Throw 2-4-11 3-6-14 4-8-17 6-10-19 7-11-21 8-13-22 9-14-23 11-17-25 13-19-27 15-21-29
NC <15 <15 20 25 30 33 36 40 43 46
CFM 490 615 735 860 980 1105 1225 1475 1720 1965
Ps .038 .060 .086 .117 .152 .194 .238 .345 .469 .613
Pt .048 .076 .108 .148 .192 .244 .300 .435 .592 .772
15
Throw* 1-3-11 2-4-14 3-6-16 4-8-19 5-11-21 6-12-23 7-14-24 11-17-26 13-19-28 15-21-30
Throw 2-4-12 3-7-15 4-9-18 6-10-21 8-12-22 9-13-24 10-15-25 12-18-27 14-21-29 16-22-31
NC <15 <15 20 27 32 35 37 41 44 47

5750
DEFINITION OF UNITS
Vn Neck Velocity
MODEL
PHENOMENATOR
The Model Phenomenator is an excellent selection for providing
DIFFUSERS
exceptional comfort, especially in board rooms and conference
CEILING
*AIRE
METAL
rooms. It has the highest induction ratio of any commercial air
Tag:available.
diffuser
Series
Available :
in aluminized Phenomenator
steel and steel construction Submittal No: PHENOM
Designed for applications requiring minimal temperature differences in a space
Square Face Diffusers - Round Neck
Ultra High
One piece Performance
die-formed back pan provides a smooth surface with no corner joints
Face panel has rounded corners
Models: Steel Aluminized
with aSteel
smooth edge
Phenom-1 Phenom-1 AS Surface Mount
High induction inner core Phenom-6
assembly AS

Phenom-6 T-Bar Lay in
Phenom-7 Phenom-7 AS Concealed T-Bar
Phenom-9 Phenom-9 AS Donn ( USG ) Ceiling Grid
Models: Phenom-1 ( Steel - Surface Mount )

Phenom-1 AS ( Aluminized Steel - Surface Mount )
1
Earthquake Tab Neck - 8 1 41
Latch Tabs
221
Ceiling
Line 8
Ceiling Opening = 24 x 24
4 x 24 4
Models: Phenom-6 ( Steel - T-Bar Lay in )

Phenom-6 AS ( Aluminized Steel - T-Bar Lay in )
Earthquake Tab Neck - 1

8
PHENOMENATOR
Latch Tabs
T-Bar By Others
1 21
Number PHENOM
3 3
Overall Face = 23 4
x 23 4
T-Bar Spacing = 24 x 24
Models: Phenom-7 ( Steel - Concealed T-Bar )

Phenom-7 AS ( Aluminized Steel - Concealed T-Bar )
1
Concealed
T-Bar By Others Latch Tabs
Submittal
Overall Face 23 7
7
8 x 23 8
T-Bar Spacing 24 x 24
Models: Phenom-9 ( Steel - Donn Ceiling Grid )

Phenom-9 AS ( Aluminized Steel - Donn Ceiling Grid )
1
Narow T-Bar
Latch Tabs
By Others
T-Bar Spacing = 24 x 24

SERIES PHENOMENATOR SPECIFICATIONS
Air Diffusers shall be model: Performance Specification

Phenom-1 Surface Mount The manufacturer shall provide published performance
Phenom-6 T-bar Lay-in data. Data shall be tested in accordance to ANSI/
Phenom-7 Concealed Spline
DIFFUSERS
CEILING
Phenom-9 Donn Fineline Lay-in

Paint Specification
Phenom manufactured by METALAIRE. Process shall be anodic electro-deposition using an
Units shall be constructed of steel. anodic acrylic paint. Units shall undergo pre-treatment
Phenom AS manufactured by METALAIRE. including a pressurized spray stage using an alkaline
Units shall be constructed of aluminized steel. cleaner and a de-ionized water rinse.
Units shall be square with a formed backpan, flat
panel face, and a high induction inner high induction
core assembly. The face panel of the outlet shall project
no more than 1/4" below the ceiling grid. The units

shall be the size and quantity as outlined in the plans
and specifications.
Inlets shall be drawn into the backpan of the diffuser.
Welded inlets are not acceptable. Diffusers shall include
seismic tabs drawn into the backpan.
Face panel shall be held in place with hooks are secured
through the backpan and be removable without the aid of
tools. Units with face panels held in place with springs or
clips are not acceptable.
Inner core assembly shall be steel and include a gasket
between the core and the backpan. The high induction
core assembly shall produce a four way discharge pattern
PHENOMENATOR
through a series of nozzles to maximize induction and

comfort. ADPI for the diffuser shall be a minimum of 97 in
typical applications.
ceiling system.
PHENOMENATOR MODEL NUMBER SPECIFICATION
SQUARE FACE DIFFUSER PLAQUE FACE HIGH PERFORMANCE
Phenom-1 Surface Mount - Steel 6 Standard Finish
Phenom-1 AS Surface Mount - Aluminized Steel 8 01 White
DIFFUSERS
Phenom-1 AL Surface Mount - Aluminum 10 Optional Finishes
CEILING
24 x 24
12 02 Satin Silver
14 03 Black
15 28 Custom Color
G3 Equalizing Grid

RSD Radial Damper
PHENOMENATOR

PHENOMENATOR MODEL NUMBER SPECIFICATION
Phenom-6 T-bar Lay-in - Steel 6 Standard Finish
Phenom-6 AS T-bar Lay-in - Aluminized Steel 8 01 White
DIFFUSERS
Phenom AL T-bar Lay-in - Aluminum 10 Optional Finishes

CEILING
24 x 24
Phenom-7 Concealed Spline - Steel 12 02 Satin Silver
Phenom-7 AS Concealed Spline - Aluminized Steel 14 03 Black
Phenom-9 Donn Fineline / Bolt Slot - Steel 15 28 Custom Color
Phenom-9 AS Donn Fineline / Bolt Slot - Aluminized Steel
G3 Equalizing Grid
RSD Radial Damper


MPhenom-6 Metric T-bar Lay-in - Steel 6 Standard Finish
MPhenom-6 AS Metric T-bar Lay-in - Aluminized Steel 8 01 White
10 600mm x Optional Finishes
PHENOMENATOR
14 03 Black
15 28 Custom Color
G3 Equalizing Grid
RSD Radial Damper
SERIES PHENOMENATOR PERFORMANCE DATA
MODEL PHENOMENATOR
fpm Vn 400 500 600 700 800 900 1000 1200
Nominal
Neck Size Pv 0.01 0.016 0.022 0.031 0.04 0.05 0.062 0.09
CFM 120 135 155 175 195 215
DIFFUSERS
Ps .020 .026 .034 .044 .054 .066
CEILING
Pt .042 .057 .074 .094 .116 .141
6
Throw* 1-1-2 1-2-3 2-2-4 2-3-5 3-4-6 3-5-7
Throw 1-1-1 1-1-2 1-1-3 1-2-4 2-3-5 3-4-6
NC <20 20 21 24 26 29
CFM 140 175 210 245 280 315 350 385
Ps .020 .031 .045 .061 .080 .101 .125 .152
Pt .030 .047 .067 .092 .114 .151 .187 .218
8

Throw* 1-2-3 2-3-5 2-5-6 3-6-7 4-6-8 57-10 6-8-12 7-9-13
Throw 1-1-2 1-2-4 1-4-5 2-5-6 3-5-7 4-6-9 5-7-10 6-7-11
NC <20 21 25 29 32 35 37 40
CFM 220 275 325 380 435 490 545 600
Ps .036 .080 .090 .108 .142 .180 .223 .27
Pt .046 .096 .110 .139 .182 300 .285 .345
10
Throw* 4-6-9 6-8-10 7-9-12 8-10-13 8-10-14 9-12-16 11-14-17 12-15-18
Throw 3-5-7 5-7-9 5-8-11 6-9-12 7-9-13 8-11-15 10-13-15 11-13-17
NC 20 24 27 31 35 38 41 44
CFM 315 395 470 550 630 705 785 870
Ps .061 .096 .136 .186 .24 .306 .38 .423
Pt .071 .112 .156 .217 .28 .356 .442 .495
12
Throw* 4-7-11 7-10-13 9-11-14 11-13-16 13-15-18 15-18-20 16-20-22 18-21-24
PHENOMENATOR
Throw 3-6-10 6-9-12 7-10-13 9-11-14 11-14-16 12-15-18 13-17-20 15-19-22
NC 22 27 32 36 40 43 46 52
CFM 430 535 640 750 860 975 1095 1220
Ps .089 .138 .166 .271 .284 .293 .306 .336
Pt .099 .154 .188 .297 .318 .343 .360 .441
14
Throw* 9-10-13 11-14-15 13-15-18 14-17-21 16-19-23 17-21-25 19-23-27 23-26-29
Throw 6-7-11 7-11-13 11-14-15 12-15-17 16-18-20 18-20-22 20-22-24 21-23-26
NC 30 35 40 44 50 56 62 68
CFM 490 615 735 875 1020 1165
Ps .112 .177 .253 .337 .355 .364
Pt .122 .193 .275 .368 .395 .414
15
Throw* 10-12-14 13-15-17 13-16-20 16-19-22 19-21-25 21-23-27
Throw 8-10-12 10-12-14 11-14-17 12-16-19 15-19-22 17-21-23
NC 33 39 44 50 56 62

PERFORMANCE NOTES FOR SERIES PHENOMENATOR
DEFINITION OF UNITS
DIFFUSERS

CEILING

Vn Neck Velocity
PHENOMENATOR
LOUVERED FACE DIFFUSERS
MODEL 5000 MODEL L-5000
DIFFUSERS
CEILING
MODELS 5500 AND 5500S MODEL 5200 MODEL 5500DD MODEL 9000

Model 5000 deflector blades are straight and do not include a horizontal lip,
which makes it an excellent choice for high capacity applications. The high PAGE 30
induction feature ensures draft free conditions in high ceiling applications.
Model L-5000 is a fixed pattern, high induction architectural linear louver

diffuser. The diffuser is aluminum construction and is available with either PAGE 49
1-way or 2-way air discharge patterns.
Models 5500 and 5500S incorporate a horizontal lip to create a high

induction rate for rapid mixing of room air and primary air. The high PAGE 59
induction feature ensures draft free conditions in low ceiling applications.
Model 5500DD is designed to allow an optional ceiling tile (by others) to be

installed from the face of the diffuser without having to remove the plenum.
PAGE 73
The unique horizontal lip on all sides of the diffuser face provides a horizontal
air pattern that is tight to the ceiling.
Model 5200 is designed for industrial, commercial and light commercial

PAGE 78
applications requiring only square diffuser sizes up to 24" x 24".
Model 9000 is a modular adjustable air diffuser engineered for supply air
distribution. It is designed for ceiling installation and can be adjusted quickly PAGE 83
and easily by rearranging the air pattern cores.

MODEL 5000
Extruded aluminum square/rectangular louvered face ceiling diffuser,
with spring loaded latches designed for easy removal of cores.
Straight deflector blades make this diffuser excellent for high capacity
DIFFUSERS
systems. Available with a variety of air pattern variations and optional

CEILING
induction vanes. Several frame styles are available to satisfy all

standard mounting methods.
Variety of air patterns 3" size increments 1 1/2" vane spacing
Extruded aluminum construction choice of 8 mounting frames
Easily removable spring loaded cores no tools required
Optional round neck possible with TR transition

5000
DIFFUSERS
CEILING
5000
Frame Style IV Overall Diffuser Size Ceiling Opening Dimensions Bottom of Duct to Ceiling Line
-1 Neck Size + 5 1/4 Neck Size + 3 1/4 1 1/2
-2 Neck Size + 4 5/8 Neck Size + 1/2 1 3/16
-6 T-Bar Spacing - 1/4 T-Bar Module Size 1 11/16
-8 T-Bar Spacing 1/4 T-Bar Module Size 1 15/16
-9 T-Bar Grid Size 1/4 Ceiling Grid Size 1 1/16


Air Diffusers shall be model: Options

5000-1 Surface Mount ADJUSTABLE PATTERN
5000-2 V Beveled Drop Face (HORIZONTAL TO VERTICAL)
5000-4 Drop Face
Diffusers shall include adjustable air pattern deflector
DIFFUSERS

CEILING
5000-46 Drop Face T-Bar Lay-in blades that allow the air pattern to be set from vertical
5000-6 T-bar Lay-in to horizontal (Optional APD Air Pattern Deflectors). Air
5000-7 Concealed Spline pattern deflector blades shall be accessible from the face
5000-8 Tegular Lay-in of the diffuser and adjustable without the use of tools.
5000-9 Donn Fineline IV INDUCTION VANES
Air Diffusers shall be aluminum model 5000 Units shall include IV induction vanes factory mounted
manufactured by METALAIRE. Units shall consist of onto the back side of the deflector vanes. IV vanes shall
a fixed pattern louvered core fastened into a border with increase the induction rate of the diffuser.
spring loaded latches. Core shall be removable without

the use of tools. Diffusers shall be engineered for high Accessories
capacity applications and include straight deflector
blades (without a horizontal lip). Units with a horizontal OPTIONAL DAMPERS
lip at the ends of the deflector blades are not acceptable. Aluminum D5A or Steel D5 opposed blade dampers shall
The units shall be the size and quantity as outlined in be provided. Damper shall be adjusted using a handle
the plans and specifications. accessible through the face of the diffuser.
Diffusers shall be available in 1, 2-way opposite, Screwdriver slot operators are not allowed
2-way corner, 3, and 4-way directional air patterns.
ceiling system. The manufacturer shall provide published performance
5000
Paint Specification
cleaner and de-ionized water rinse.
LOUVERED FACE CEILING DIFFUSER
Neck
Model 6 9 12 15 18 21 24 27 30 33 36 36 42 45 48
5000-1 Surface Mount - Extruded Aluminum 6 X
DIFFUSERS
5000-2 Beveled Drop Surface Mount - Extruded Aluminum 9 X X
CEILING
5000-4 5000-4 Drop Face Surface Mount - Extruded Aluminum 12 X X X
15 X X X X
18 X X X X X
21 X X X X X X
24 X X X X X X X
27 X X X X X X X X

Air Pattern Available Accessories Available Finishes

Standard D5 Steel Opposed Blade Damper Standard
S4 Sq 4-Way D5A Aluminum Opposed Blade Damper 01 White
Optional L9 Square / Rectangular Equalizing Grid Optional
S1 Sq 1-Way TR Square to Round Transition 02 Satin Silver
S2 Sq 2-Way TR Deep (Used with Damper) Deep Square to Round Transition 03 Black
5000
S3 Sq 3-Way G3 Round Equalizing Grid 24 Mill
SC Sq 2-Way corner BDS Butterfly Damper 28 Custom Color
R1S Rct 1-Way short RSD Radial Shutter Damper
R1L Rct 1-Way long
R2S Rct 2-Way short Available Options
R2L Rct 2-Way long IV Induction Vanes
R3S Rct 3-Way short APD Air Pattern Deflectors
R3L Rct 3-Way long
R4 Rct 4-Way

Neck
Model Panel 6 9 12 15 18 21 24 27 30 33 36 39 42 45
6 X
5000-6 T-bar Lay-in - Extruded Aluminum 12 x 12
DIFFUSERS
9 X
CEILING
6 X
5000-6 T-bar Lay-in - Extruded Aluminum 9 X X
5000-7 Concealed Spline - Extruded Aluminum 12 X X X
24 x 24
5000-8 Tegular T-bar - Extruded Aluminum 15 X X X X
5000-9 Donn Fineline - Extruded Aluminum 18 X
21 X
6 X
9 X X
12 X X X
15 X X X X
18 X X X X
21 X X X X
24 X X X X
27 X X X X
30 X
33 X
6 X
9 X X
12 X X X
15 X X X X
18 X X X X
21 X X X X
24 X X X X
5000

27 X X X X
30 X X X X
33 X X X X
36 X X X X
39 X X X X
42 X
45 X
6 X
9 X X
12 X X X
15 X X X X
18 X X X X X
21 X X X X X X
24 X X X X X X X
27 X X X X X X X X
42 X
45 X
DIFFUSERS
CEILING
R1L Rct 1-Way long

R3L Rct 3-Way long
R4 Rct 4-Way
5000

SERIES 5000 PERFORMANCE DATA/4-WAY SQUARE PATTERN (S4)
MODEL 5000
Neck Velocity
200 300 400 500 600 700
Ps 0.006 0.013 0.022 0.035 0.05 0.068
DIFFUSERS
Neck Size Pt 0.008 0.018 0.032 0.05 0.072 0.099

CEILING
Total CFM 50 75 100 125 150 175

CFM/Side 13 19 25 31 38 44
6x6
Throw 2-4 4-8 7-11 9-13 11-16 13-17
NC - - - - 20 25
Total CFM 113 169 225 281 335 394
CFM/Side 28 42 56 70 84 98
9x9
Throw 3-5 5-9 8-12 10-15 12-17 14-18
NC - - - 21 26 31
Total CFM 200 300 400 500 600 700
CFM/Side 50 75 100 125 150 175
12 x 12
Throw 3-7 6-10 9-14 11-16 13-18 15-20
NC - - - 24 29 34
Total CFM 313 469 625 781 938 1094
CFM/Side 78 117 156 195 234 273
15 x 15
Throw 4-8 7-12 10-15 12-18 15-20 17-22
NC - - 21 26 31 36
Total CFM 450 675 900 1125 1350 1575
CFM/Side 113 169 225 281 338 394
18 x 18
Throw 5-10 8-14 11-17 14-20 16-22 18-23
5000
NC - - 22 27 32 37
Total CFM 613 919 1225 1531 1837 2144
CFM/Side 153 230 306 383 459 536
21 x 21
Throw 6-12 9-16 12-19 15-21 17-23 19-25
NC - - 23 28 33 38
Total CFM 800 1200 1600 2000 2400 2800
CFM/Side 200 300 400 5000 600 700
24 x 24
Throw 7-14 10-17 12-20 16-23 18-25 21-27
NC - - 24 29 34 39
Total CFM 1013 1519 2025 2531 3037 3544
CFM/Side 253 380 506 633 759 886
27 x 27
Throw 7-15 11-19 14-22 17-25 20-27 22-28
NC - 20 25 30 35 4
Total CFM 1513 2269 3025 3781 4537 5294
CFM/Side 378 567 756 945 1134 1323
33 x 33
Throw 9-18 13-22 16-25 19-27 22-30 24-31
NC - 21 26 31 36 41
SERIES 5000 PERFORMANCE DATA/4-WAY RECTANGULAR PATTERN (R4)
MODEL 5000
Neck Velocity
200 300 400 500 600 700
Ps .006 .013 .022 .035 .050 .068
DIFFUSERS
Pt .008 .018 .032 .050 .072 .099
CEILING
Neck
Size Side Designation A B A B A B A B A B A B
Total CFM 75 113 150 185 225 263
CFM/Side 13 25 19 38 25 50 31 63 38 75 43 86
6x9
Throw 2-4 2-5 4-8 5-9 7-11 8-12 9-13 10-14 11-16 12-17 13-17 14-18
NC - - - - - -
Total CFM 100 150 200 250 300 350
CFM/Side 13 38 19 56 25 75 31 94 38 113 44 131
6 x 12

Throw 2-4 3-6 4-8 6-10 7-11 8-13 9-13 11-15 11-16 13-17 13-17 15-19
NC - - - 20 25 30
Total CFM 150 225 300 375 450 525
CFM/Side 28 47 42 70 56 94 70 117 84 141 98 164
9 x 12
Throw 3-5 3-7 5-9 6-10 8-12 9-13 10-15 11-16 12-17 13-18 14-18 15-20
NC - - - 22 27 32
Total CFM 188 281 375 469 563 656
CFM/Side 28 66 42 98 56 131 70 164 84 197 98 230
9 x 15
Throw 3-5 4-8 5-9 7-11 8-12 9-14 10-15 12-17 12-17 14-19 14-18 16-21
NC - - - 23 28 33
Total CFM 225 338 450 563 675 788
CFM/Side 28 84 42 127 56 169 70 211 84 253 98 295
9 x 18
5000
Throw 3-5 - 4-9 5-9 7-12 8-12 10-16 10-15 13-18 12-17 15-20 14-18 17-22
NC - - 24 29 34
Total CFM 263 394 525 656 788 919
CFM/Side 28 103 42 155 56 206 70 258 84 309 98 361
9 x 21
Throw 3-5 5-10 5-9 8-13 8-12 11-17 10-15 13-19 12-17 16-21 14-18 18-23
NC - - 20 25 30 35
Total CFM 250 375 500 625 750 875
CFM/Side 50 75 75 113 100 150 125 188 150 225 175 263
12 x 15
Throw 3-7 4-8 6-10 7-12 9-14 10-15 11-16 12-18 13-18 14-20 15-20 16-21
NC - - 20 25 30 35
Total CFM 300 450 600 750 900 1050
CFM/Side 50 100 75 150 100 200 125 250 150 300 175 350
12 x 18
Throw 3-7 5-10 6-10 8-13 9-14 11-16 11-16 13-19 13-18 15-21 15-20 17-23
NC - - 20 25 30 35
Total CFM 350 525 700 875 1050 1225
CFM/Side 50 125 75 188 100 250 125 313 150 375 175 438
12 x 21
Throw 3-7 5-11 6-10 8-14 9-14 11-18 11-16 14-20 13-18 16-22 15-20 18-24
NC - - 21 26 31 36

SERIES 5000 PERFORMANCE DATA/4-WAY RECTANGULAR PATTERN (R4)
MODEL 5000
Neck Velocity
200 300 400 500 600 700
Ps .006 .013 .022 .035 .050 .068
DIFFUSERS
Pt .008 .018 .032 .050 .072 .099

CEILING
Neck
Total CFM 400 600 800 1000 1200 1400
CFM/Side 50 150 75 225 100 300 125 375 150 450 175 525
12 x 24
Throw 3-7 6-12 6-10 9-15 9-14 12-19 11-16 15-21 13-18 17-23 15-20 1-25
NC - - 22 27 32 37
Total CFM 375 563 750 938 1125 1313
CFM/Side 78 109 117 164 156 219 195 273 234 328 273 383
15 x 18
Throw 4-8 5-10 7-12 8-14 10-15 11-17 12-18 14-19 15-20 16-22 17-22 18-23
NC - - 21 26 31 36
Total CFM 500 750 1000 1250 1500 1750
CFM/Side 78 172 117 258 156 344 195 430 234 516 273 602
15 x 24
Throw 4-8 6-13 7-12 9-16 10-15 13-19 12-18 15-22 15-20 18-24 17-22 20-26
NC - - 22 27 32 37
Total CFM 600 900 1200 1500 1800 2100
CFM/Side 113 188 160 281 225 375 281 469 338 563 394 656
18 x 24
Throw 5-10 6-13 8-14 10-17 11-17 13-20 14-20 16-23 16-22 18-25 18-23 20-26
NC - - 23 28 33 38
Total CFM 963 1444 1925 2406 2888 3369
CFM/Side 153 328 230 492 306 656 383 820 459 984 536 1148
21 x 33
5000
Throw 6-12 8-17 9-16 12-21 12-19 15-24 15-21 18-26 17-23 21-29 19-25 23-30
NC - 20 25 30 35 40
Total CFM 1000 1500 2000 2500 3000 3500
CFM/Side 200 300 300 1500 400 600 500 750 600 900 700 1050
24 x 30
Throw 7-14 8-16 10-17 12-20 13-20 15-23 16-23 18-26 18-25 21-28 21-27 23-30
NC - 20 25 30 35 40
MODEL 5000
Neck Velocity
200 300 400 500 600 700
Ps 0.006 0.013 0.022 0.035 0.05 0.068
DIFFUSERS
Neck Size Pt 0.008 0.018 0.032 0.05 0.072 0.099
CEILING
Total CFM 50 75 100 125 150 175
CFM/Side 13 19 25 31 38 44
6x6
Throw 2-4 4-8 7-11 9-13 11-16 13-17
NC - - - - 20 25
Total CFM 113 169 225 281 335 394
CFM/Side 28 42 56 70 84 98
9x9
Throw 3-5 5-9 8-12 10-15 12-17 14-18

NC - - - 21 26 31
Total CFM 200 300 400 500 600 700
CFM/Side 50 75 100 125 150 175
12 x 12
Throw 3-7 6-10 9-14 11-16 13-18 15-20
NC - - - 24 29 34
Total CFM 313 469 625 781 938 1094
CFM/Side 78 117 156 195 234 273
15 x 15
Throw 4-8 7-12 10-15 12-18 15-20 17-22
NC - - 21 26 31 36
Total CFM 450 675 900 1125 1350 1575
CFM/Side 113 169 225 281 338 394
18 x 18
Throw 5-10 8-14 11-17 14-20 16-22 18-23
5000
NC - - 22 27 32 37
Total CFM 613 919 1225 1531 1837 2144
CFM/Side 153 230 306 383 459 536
21 x 21
Throw 6-12 9-16 12-19 15-21 17-23 19-25
NC - - 23 28 33 38
Total CFM 800 1200 1600 2000 2400 2800
CFM/Side 200 300 400 5000 600 700
24 x 24
Throw 7-14 10-17 12-20 16-23 18-25 21-27
NC - - 24 29 34 39
Total CFM 1013 1519 2025 2531 3037 3544
CFM/Side 253 380 506 633 759 886
27 x 27
Throw 7-15 11-19 14-22 17-25 20-27 22-28
NC - 20 25 30 35 4

SERIES 5000 PERFORMANCE DATA/3-WAY RECTANGULAR PATTERN (R3S)
MODEL 5000
Neck Velocity
200 300 400 500 600 700
Ps .006 .013 .022 .035 .050 .068
DIFFUSERS
Pt .008 .018 .032 .050 .072 .099

Neck
CEILING
Size Side Desination A B A B A B A B A B A B

Total CFM 75 113 150 188 225 263
CFM/Side 28 23 42 35 56 47 70 59 84 70 98 82
6x9
Throw 3-6 3-6 7-12 7-11 11-18 11-17 16-23 16-23 21-29 20-28 24-32 24-34
NC - - - 21 26 31
Total CFM 100 150 200 250 300 350
CFM/Side 50 25 75 38 100 50 125 63 150 75 175 88
6 x 12
Throw 5-9 3-6 8-15 7-12 13-20 11-17 18-26 16-23 22-31 20-28 26-37 24-34
NC - - - 23 28 33
Total CFM 150 225 300 375 450 525

CFM/Side 50 50 75 75 100 100 125 125 150 150 175 175
9 x 12
Throw 5-9 5-9 8-15 8-15 13-20 13-20 18-26 18-26 22-31 22-31 26-37 26-37
NC - - 20 25 30 35
Total CFM 188 281 375 469 563 656
CFM/Side 78 55 117 82 156 109 195 137 234 164 273 191
9 x 15
Throw 4-8 3-7 7-12 6-11 10-15 9-14 12-18 11-16 15-20 14-19 17-22 15-20
NC 20 20 20 23 28 33
Total CFM 250 375 500 625 750 875
12 x 15
CFM/Side 78 86 117 129 156 172 195 215 234 258 273 301
Throw 4-8 4-9 7-12 7-12 10-15 10-16 12-18 13-18 15-20 15-20 17-22 17-22
NC 20 20 20 25 30 35
Total CFM 300 450 600 750 900 1050
12 x 18
CFM/Side 113 94 169 141 225 188 281 234 338 281 394 328
Throw 5-10 4-9 8-14 7-13 11-17 10-16 14-20 13-19 16-22 15-21 18-23 17-22
5000
NC 20 20 20 25 30 35
Total CFM 375 563 750 938 1125 1313
15 x 18
CFM/Side 113 131 169 197 225 263 281 238 338 394 394 459
Throw 5-10 5-11 8-14 8-15 11-17 12-18 14-20 14-20 16-22 17-23 18-23 19-24
NC 20 20 21 26 31 36
Total CFM 438 656 875 1094 1313 1531
15 x 21
CFM/Side 153 142 230 213 306 284 383 355 459 427 536 498
Throw 6-12 5-11 9-16 9-15 12-19 12-18 15-21 15-21 17-23 17-23 19-25 19-25
NC 20 20 22 27 32 37
Total CFM 600 900 1200 1500 1800 2100
18 x 24
CFM/Side 200 200 300 300 400 400 500 500 600 600 700 700
Throw 7-14 7-14 10-17 10-17 13-20 13-20 16-23 16-23 18-25 18-25 21-27 21-27
NC 20 20 23 28 33 38
Total CFM 788 1181 1575 1969 2362 2756
21 x 27
CFM/Side 253 267 380 401 506 534 633 668 759 802 886 935
Throw 7-15 7-15 11-19 11-19 14-22 15-22 17-25 17-25 20-27 20-27 22-28 22-29
NC 20 20 24 29 34 39
Total CFM 1000 1500 2000 2500 3000 3500
24 x 30
CFM/Side 313 344 469 516 625 688 781 859 938 1031 1094 1203
Throw 8-17 8-17 12-20 12-11 15-23 1624 18-26 19-27 21-28 21-29 23-30 23-31
NC 20 20 25 30 35 40
SERIES 5000 PERFORMANCE DATA/3-WAY RECTANGULAR PATTERN (R3L)
MODEL 5000
Neck Velocity
200 300 400 500 600 700
Ps .006 .013 .022 .035 .050 .068
DIFFUSERS
Pt .008 .018 .032 .050 .072 .099
CEILING
Neck
Total CFM 75 113 150 185 225 263
CFM/Side 13 25 19 38 25 50 31 63 38 75 43 86
6x9
Throw 2-4 2-5 4-8 5-9 7-11 8-12 9-13 10-14 11-16 12-17 13-17 14-18
NC - - - - - -
Total CFM 100 150 200 250 300 350
CFM/Side 13 38 19 56 25 75 31 94 38 113 44 131
6 x 12

Throw 2-4 3-6 4-8 6-10 7-11 8-13 9-13 11-15 11-16 13-17 13-17 15-19
NC - - - 20 25 30
Total CFM 150 225 300 375 450 525
CFM/Side 28 47 42 70 56 94 70 117 84 141 98 164
9 x 12
Throw 3-5 3-7 5-9 6-10 8-12 9-13 10-15 11-16 12-17 13-18 14-18 15-20
NC - - - 22 27 32
Total CFM 188 281 375 469 563 656
CFM/Side 28 66 42 98 56 131 70 164 84 197 98 230
9 x 15
Throw 3-5 4-8 5-9 7-11 8-12 9-14 10-15 12-17 12-17 14-19 14-18 16-21
NC - - - 23 28 33
Total CFM 225 338 450 563 675 788
CFM/Side 28 84 42 127 56 169 70 211 84 253 98 295
9 x 18
5000
Throw 3-5 - 4-9 5-9 7-12 8-12 10-16 10-15 13-18 12-17 15-20 14-18 17-22
NC - - 24 29 34
Total CFM 263 394 525 656 788 919
CFM/Side 28 103 42 155 56 206 70 258 84 309 98 361
9 x 21
Throw 3-5 5-10 5-9 8-13 8-12 11-17 10-15 13-19 12-17 16-21 14-18 18-23
NC - - 20 25 30 35
Total CFM 250 375 500 625 750 875
CFM/Side 50 75 75 113 100 150 125 188 150 225 175 263
12 x 15
Throw 3-7 4-8 6-10 7-12 9-14 10-15 11-16 12-18 13-18 14-20 15-20 16-21
NC - - 20 25 30 35

MODEL 5000
Neck Velocity
200 300 400 500 600 700
Ps .006 .013 .022 .035 .050 .068
DIFFUSERS
Pt .008 .018 .032 .050 .072 .099

CEILING
Neck
Total CFM 300 450 600 750 900 1050
CFM/Side 50 100 75 150 100 200 125 250 150 300 175 350
12 x 18
Throw 3-7 5-10 6-10 8-13 9-14 11-16 11-16 13-19 13-18 15-21 15-20 17-23
NC - - 20 25 30 35
Total CFM 375 563 750 938 1125 1313
CFM/Side 148 78 223 117 297 156 371 195 445 234 520 273
12 x 21
Throw 6-12 4-8 9-15 7-12 12-19 10-15 15-21 12-18 17-23 15-20 19-25 17-22
NC 20 20 21 26 31 36
Total CFM 438 656 875 1094 1313 1531
CFM/Side 180 78 270 117 359 156 449 195 539 234 629 273
12 x 24
Throw 6-13 4-8 10-17 7-12 13-20 10-15 16-22 12-18 18-27 16-22 20-26 17-22
NC 20 20 22 27 32 37
Total CFM 525 788 1050 1313 1575 1837
CFM/Side 206 113 309 169 413 225 516 281 619 338 722 394
15 x 18
Throw 7-14 5-10 10-17 8-14 13-21 11-17 16-23 14-20 19-25 16-22 21-27 18-23
NC 20 20 23 28 33 38
Total CFM 600 900 1200 1500 1800 2100
CFM/Side 244 113 366 169 488 225 609 281 731 338 853 394
15 x 24
5000
Throw 7-15 5-10 11-19 8-14 14-22 11-17 17-24 14-20 19-26 17-23 22-28 18-23
NC 20 20 23 28 33 38
Total CFM 788 1181 1575 1969 2362 2756
CFM/Side 317 153 476 230 634 306 793 383 952 459 1110 536
18 x 24
Throw 8-17 6-12 12-20 9-16 15-24 12-19 18-26 15-21 21-28 18-23 23-30 19-25
NC 20 20 24 29 34 39
SERIES 5000 PERFORMANCE DATA/2-WAY SQUARE PATTERN (S2 SC)
MODEL 5000
Neck Velocity
200 300 400 500 600 700
Ps 0.006 0.013 0.022 0.035 0.05 0.068
DIFFUSERS
Neck Size Pt 0.008 0.018 0.032 0.05 0.072 0.099
CEILING
Total CFM 50 75 100 125 150 175
CFM/Side 25 38 50 63 75 88
6x6
Throw 2-5 5-9 8-12 10-14 12-17 14-18
NC 20 20 20 20 20 25
Total CFM 113 169 225 281 338 394
CFM/Side 56 84 113 141 169 197
9x9
Throw 3-7 6-11 9-14 12-17 14-19 16-20

NC 20 20 20 21 26 31
Total CFM 200 300 400 500 600 700
CFM/Side 100 150 200 250 300 350
12 x 12
Throw 5-10 8-13 11-16 13-19 15-21 17-23
NC 20 20 20 24 29 34
Total CFM 313 469 625 781 938 1094
CFM/Side 156 234 313 391 469 547
15 x 15
Throw 6-12 9-16 12-19 15-21 17-24 19-25
NC 20 20 21 26 31 36
Total CFM 450 675 900 1125 1350 1575
CFM/Side 225 338 450 563 675 788
18 x 18
Throw 7-14 10-18 14-21 17-24 19-26 21-28
5000
NC 20 20 22 27 32 37
Total CFM 613 919 1225 1531 1837 2144
CFM/Side 306 459 613 766 979 1072
21 x 21
Throw 8-17 12-20 15-23 18-26 21-28 23-30
NC 20 20 23 28 33 38
Total CFM 800 1200 1600 2000 2400 2800
CFM/Side 400 600 800 1000 1200 1400
24 x 24
Throw 9-18 13-22 16-25 19-28 22-30 24-30
NC 20 20 24 29 34 39
Total CFM 1013 1519 2025 2531 3037 3544
CFM/Side 506 759 1013 1266 1519 1772
27 x 27
Throw 10-20 14-24 17-27 21-29 23-32 25-33
NC 20 20 25 30 35 40

MODEL 5000
Neck Velocity
200 300 400 500 600 700
Ps 0.006 0.013 0.022 0.035 0.05 0.068
DIFFUSERS
Neck Size Pt 0.008 0.018 0.032 0.05 0.072 0.099

CEILING
Total CFM 50 75 100 125 150 175

6x6 Throw 3-7 6-10 9-14 11-16 13-18 15-20
NC 20 20 20 20 20 25
Total CFM 113 169 225 281 338 394
9x9 Throw 5-10 8-14 11-17 14-20 16-22 18-23
NC 20 20 20 21 26 31
Total CFM 200 300 400 500 600 700
12 x 12 Throw 7-14 10-17 13-20 16-23 18-25 21-27

NC 20 20 20 24 29 34
Total CFM 313 469 625 781 938 1094
15 x 15 Throw 8-17 12-20 15-23 18-26 21-28 23-30
NC 20 20 21 26 31 36
Total CFM 450 675 900 1125 1350 1575
18 x 18 Throw 9-19 13-23 17-26 20-29 23-31 25-32
NC 20 20 22 27 32 37
Total CFM 615 919 1225 1531 1837 2144
21 x 21 Throw 10-21 14-25 18-28 21-31 24-33 26-35
NC 20 20 23 28 33 38
Total CFM 800 1200 1600 2000 2400 2800
5000
24 x 24 Throw 11-23 15-27 19-30 23-32 25-34 28-36

NC 20 20 24 29 34 39
Total CFM 1013 1519 2025 2531 3037 3544
27 x 27 Throw 12-24 16-28 20-31 23-34 26-36 29-38
NC 20 20 25 30 35 40
SERIES 5000 PERFORMANCE DATA/
2-WAY RECTANGULAR PATTERN (R2L R2S)
MODEL 5000
Neck Velocity
200 300 400 500 600 700
DIFFUSERS
Ps 0.006 0.013 0.022 0.035 0.05 0.068
CEILING
Neck Size Pt 0.008 0.018 0.032 0.05 0.072 0.099
Total CFM 75 113 150 188 225 263
CFM/Side 38 56 75 94 113 131
6x9
Throw 3-6 6-10 8-13 11-15 13-17 15-19
NC 20 20 20 20 23 28
Total CFM 100 150 200 250 300 350
CFM/Side 50 75 100 125 150 175
6 x 12

Throw 3-7 6-10 9-14 11-16 13-18 15-20
NC 20 20 20 20 25 30
Total CFM 125 188 250 313 375 438
CFM/Side 63 94 125 156 188 219
6 x 15
Throw 4-7 6-11 9-14 12-17 14-19 16-21
NC 20 20 20 21 26 31
Total CFM 150 225 300 375 450 525
CFM/Side 75 113 150 188 225 263
6 x 18
Throw 4-8 7-12 10-15 12-18 14-20 16-21
NC 20 20 20 22 27 32
Total CFM 188 281 375 469 563 656
CFM/Side 94 141 188 234 281 328
9 x 15
5000
Throw 4-9 7-13 10-16 13-19 15-21 17-22
NC 20 20 20 23 28 33
Total CFM 225 338 450 563 675 788
CFM/Side 113 169 225 281 338 394
9 x 18
Throw 5-10 8-14 11-17 14-20 16-22 18-23
NC 20 20 20 24 29 34
Total CFM 263 394 525 656 788 919
CFM/Side 131 197 263 328 394 459
9 x 21
Throw 5-11 8-15 12-18 14-20 17-23 19-24
NC 20 20 20 25 30 35
Total CFM 250 375 500 625 750 875
CFM/Side 125 188 250 313 375 438
12 x 15
Throw 5-11 8-14 11-18 14-20 16-22 18-24
NC 20 20 20 25 30 35

MODEL 5000
Neck Velocity
200 300 400 500 600 700
DIFFUSERS
Ps 0.006 0.013 0.022 0.035 0.05 0.068

CEILING
Neck Size Pt 0.008 0.018 0.032 0.05 0.072 0.099

Total CFM 300 450 600 750 900 1050
CFM/Side 150 225 300 375 450 525
12 x 18
Throw 6-12 9-15 12-19 15-21 17-23 19-25
NC 20 20 20 25 30 35
Total CFM 350 525 700 875 1050 1225
CFM/Side 175 263 350 438 525 613
12 x 21
Throw 6-13 9-16 13-20 15-22 18-24 20-26
NC 20 20 21 26 31 36
Total CFM 438 656 875 1094 1313 1531
CFM/Side 219 328 438 547 656 766
15 x 21
Throw 7-14 10-18 14-21 16-24 19-26 21-27
NC 20 20 22 27 32 37
Total CFM 500 750 1000 1250 1500 1750
CFM/Side 250 375 500 625 750 875
15 x 24
Throw 7-15 11-19 14-22 17-25 20-27 22-28
NC 20 20 22 27 32 37
Total CFM 525 788 1050 1313 1575 1837
CFM/Side 263 394 525 656 788 919
18 x 21
5000
Throw 7-15 11-19 14-22 17-25 20-27 22-29

NC 20 20 23 28 33 38
Total CFM 600 900 1200 1500 1800 2100
CFM/Side 300 450 600 750 900 1050
18 x 24
Throw 8-16 12-20 15-23 18-26 21-28 23-30
NC 20 20 23 28 33 38
Total CFM 788 1181 1575 1969 2362 2756
CFM/Side 394 591 788 984 1181 1378
21 x 27
Throw 9-18 13-22 16-25 19-28 22-30 24-32
NC 20 20 24 20 34 39
MODEL 5000
Neck Velocity
200 300 400 500 600 700
DIFFUSERS
Ps 0.006 0.013 0.022 0.035 0.05 0.068
CEILING
Neck Size Pt 0.008 0.018 0.032 0.05 0.072 0.099
Total CFM 75 113 150 188 225 263
6x9 Throw 4-8 7-12 10-15 12-18 14-20 16-21
NC 20 20 20 20 23 28
Total CFM 100 150 200 250 300 350
6 x 12 Throw 5-10 8-13 11-16 13-19 15-21 17-23
NC 20 20 20 20 25 30
Total CFM 125 188 250 313 375 438
6 x 15 Throw 5-11 8-14 11-18 14-20 16-22 18-24

NC 20 20 20 21 26 31
Total CFM 150 225 300 300 450 525
6 x 18 Throw 6-12 9-15 12-19 12-19 17-23 19-25
NC 20 20 20 20 27 32
Total CFM 175 263 350 438 525 613
6 x 21 Throw 6-13 9-16 13-20 15-22 18-24 20-26
NC 20 20 20 23 28 33
Total CFM 188 281 375 469 563 656
9 x 15 Throw 6-13 10-17 13-20 16-23 18-25 20-26
NC 20 20 20 23 28 33
Total CFM 225 338 450 563 675 788
9 x 18 Throw 7-14 10-18 14-21 17-24 19-26 21-28
NC 20 20 20 24 29 34
Total CFM 250 375 500 625 750 875
12 x 15 Throw 7-15 11-19 14-22 17-25 20-27 22-28
5000
NC 20 20 20 25 30 35
Total CFM 300 450 600 750 900 1050
12 x 18 Throw 8-16 12-20 15-23 18-26 21-28 23-30
NC 20 20 20 25 30 35
Total CFM 438 656 875 1094 1313 1531
15 x 21 Throw 9-19 13-23 17-26 20-28 22-31 25-32
NC 20 20 22 27 32 37
Total CFM 500 750 1000 1250 1500 1750
15 x 24 Throw 10-20 14-24 17-27 20-29 23-31 25-33
NC 20 20 22 27 32 37
Total CFM 525 788 1050 1313 1575 1837
18 x 21 Throw 10-20 14-24 18-27 21-30 23-32 26-34
NC 20 20 23 28 33 38
Total CFM 600 900 1200 1500 1800 2100
18 x 24 Throw 10-21 14-25 18-28 21-31 24-33 26-34
NC 20 20 23 28 33 38
Total CFM 788 1181 1575 1969 2362 2756
21 x 27 Throw 11-23 15-26 19-30 23-32 25-34 28-36
NC 20 20 24 29 34 39

DEFINITION OF UNITS
CFM Cubic Feet Per Minute (air)
Horizontal Throw Throw distance in feet at terminal velocities of 150fpm, 100fpm and 50fpm
NC noise criteria, sound pressure level. NC ratings are based on sound power level
DIFFUSERS
(Lw) Re 10-12 watts minus a 10dB room attenuation in all octave bands
CEILING
Ps Static pressure. Diffuser only

Pt Total pressure. Includes plenum and inlet size listed and is the sum of velocity and static pressure
Pv Velocity pressure
fpm Velocity of air stream in Feet Per Minute
Ps-H Static pressure horizontal
Ps-V Static pressure vertical
Pt-V Total pressure vertical
Throw H C Throw horizontal cooling
Throw V C Throw vertical cooling
Throw V H Vertical heating
5000
odelL5000isafixedpattern,highinduction
chitecturallinearlouverdiffuser.Thediffuseris
uminumconstructionandisavailablewitheither1
ayor2wayairdischargepatterns.
MODEL L-5000
SurfaceMountunitsareavailableinlengthsfrom
18to48in3increments.TbarLayinunits
Model L-5000 is a fixed pattern, high induction architectural linear louver diffuser. The diffuser
areavailableinlengthsof18,30or42.
is aluminum construction and is available with either 1-way or 2-way air discharge patterns.
1wayunitsareavailablein3,6,9and12
Surface Mount units are available in lengths
DIFFUSERS
from 18" to 48" in 3" increments. T-bar Lay-in
widths.
CEILING
units are available in lengths of 18", 30" or 42"
2wayunitsareavailablein6and12widths.
1-way units are available in 3", 6", 9" and
Thelouveredfaceissecuredwithspringclips
12" widths
makingremovaleasyforinstallation.
2-way units are available in 6" and 12" widths
The louvered face is secured with spring clips

making removal easy for installation

L-5000
Listed Size (Available Widths) 3 6 9 12 15
Overall Diffuser Size 8 3/4 14 3/4 14 3/4 17 3/4 20 3/4
Neck Size 2 7/8 5 7/8 8 7/8 11 7/8 14 7/8
* Dimention indicates the distance needed for Clearance from bottom of the duct to the ceiling line and must be maintained for proper fit

SERIES L5000 SPECIFICATIONS
Air Diffusers shall be model: Options

L5000-1 Surface Mount ADJUSTABLE PATTERN
L5000-6 T-bar Lay-in (HORIZONTAL TO VERTICAL)
Air Diffusers shall be aluminum model L5000 Diffusers shall include adjustable air pattern deflector
DIFFUSERS

CEILING
manufactured by METALAIRE. Units shall consist of a blades that allow the air pattern to be set from vertical
fixed-pattern louvered core fastened into a border with to horizontal (Optional APD Air Pattern Deflectors). Air
spring loaded latches. Core shall be removable without pattern deflector blades shall be accessible from the face
the use of tools. Diffusers shall be engineered for high and the diffuser and adjustable without the use of tools.
capacity applications and include straight deflector
blades (without a horizontal lip). Units with a horizontal IV INDUCTION VANES
lip at the ends of the deflector blades are not acceptable. Units shall include IV induction vanes factory mounted
The units shall be the size and quantity as outlined in onto the back side of the deflector vanes. IV vanes shall
the plans and specifications. increase the induction rate of the diffuser.
Diffusers shall be available in 1 and 2-way directional

air patterns. Accessories
Units shall be designed to integrate into the specified OPTIONAL DAMPERS
ceiling system. Aluminum D5A or Steel D5 opposed blade dampers
shall be provided. Damper shall be adjusted using
a handle accessible through the face of the diffuser.
Screwdriver slot operators are not allowed.
L-5000
Paint Specification
Neck
Model 18 21 24 27 30 33 36 39 42 45 48
L5000-1 Surface Mount - Extruded Alumnum 3 X X X X X X X X X X X
DIFFUSERS
CEILING

R1L Rct 1-Way long D5A Aluminum Opposed Blade Damper 01 White
R2L Rct 2-Way long L9 Square / Rectangular Equalizing Grid Optional

02 Satin Silver
Available Options 03 Black
IV Induction Vanes 24 Mill
APD Air Pattern Deflectors 28 Custom Color

Neck
Model 18 30 42 45
L5000-6 Lay-In - Extruded Aluminum 3 X
L-5000
6 X X
9 X X X
12 X X X X

R1L Rct 1-Way long D5A Aluminum Opposed Blade Damper 01 White
R2L Rct 2-Way long L9 Square / Rectangular Equalizing Grid Optional
02 Satin Silver
Available Options 03 Black
IV Induction Vanes 24 Mill
APD Air Pattern Deflectors 28 Custom Color

MODEL L5000
Neck Velocity
200 300 400 500 600 700
Ps 0.006 0.013 0.022 0.035 0.05 0.068
DIFFUSERS
Neck Size Pt 0.008 0.018 0.032 0.05 0.072 0.099

CEILING
Total CFM 75 113 150 188 225 263

18 x 3 Throw 4-6 6-10 8-13 11-16 13-19 15-22
NC 20 20 20 20 24 29
Total CFM 88 131 175 219 263 306
21 x 3 Throw 5-7 7-10 9-14 12-17 14-21 16-23
NC 20 20 20 20 25 30
Total CFM 100 150 200 250 300 350
24 x 3 Throw 5-7 7-11 10-15 12-18 15-22 17-24
NC 20 20 20 20 25 30
Total CFM 113 169 225 281 338 394

27 x 3 Throw 5-8 8-12 10-15 13-19 16-23 18-25
NC 20 20 20 21 26 31
Total CFM 125 188 250 313 375 438
30 x 3 Throw 5-8 8-12 11-16 14-20 16-23 19-26
NC 20 20 20 21 26 31
Total CFM 138 206 275 344 413 481
33 x 3 Throw 6-9 9-13 12-17 14-21 17-24 20-27
NC 20 20 20 22 27 32
Total CFM 150 225 300 375 450 525
36 x 3 Throw 6-9 9-14 12-18 15-22 18-25 21-28
NC 20 20 20 22 27 32
Total CFM 163 244 325 406 488 569
39 x 3 Throw 6-9 9-14 13-18 16-23 19-26 22-29
NC 20 20 20 22 27 32
Total CFM 175 263 350 438 525 613
L-5000
42 x 3 Throw 7-10 10-15 13-20 16-23 20-27 23-30

NC 20 20 20 23 28 33
Total CFM 188 281 375 469 563 656
45 x 3 Throw 7-10 10-15 13-20 17-24 20-27 23-30
NC 20 20 20 23 27 33
Total CFM 200 300 400 500 600 700
48 x 3 Throw 7-10 10-15 14-21 17-24 21-28 24-31
NC 20 20 22 24 28 34
Total CFM 150 225 300 300 450 525
18 x 6 Throw 6-12 9-15 12-19 12-19 17-23 19-25
NC 20 20 20 20 27 32
Total CFM 175 263 350 438 525 613
21 x 6 Throw 6-13 9-16 13-20 15-22 18-24 20-26
NC 20 20 20 23 28 33
Total CFM 200 300 400 500 600 700
24 x 6 Throw 7-10 10-16 14-21 17-24 20-27 22-29
NC 20 20 20 23 28 33
Total CFM 225 338 450 563 675 788
27 x 6 Throw 7-11 11-17 15-22 18-25 22-29 24-31
NC 20 20 20 23 28 33
MODEL L5000
Neck Velocity
200 300 400 500 600 700
Ps 0.006 0.013 0.022 0.035 0.05 0.068
DIFFUSERS
Neck Size Pt 0.008 0.018 0.032 0.05 0.072 0.099
CEILING
Total CFM 250 375 500 625 750 875
30 x 6 Throw 8-12 12-17 16-23 19-26 22-29 25-32
NC 20 20 20 23 29 34
Total CFM 275 413 550 688 825 963
33 x 6 Throw 8-12 12-18 16-24 20-27 24-31 26-33
NC 20 20 20 23 30 35
Total CFM 300 450 600 750 900 1050
36 x 6 Throw 9-13 13-19 17-24 21-28 24-31 27-34
NC 20 20 20 23 30 35

Total CFM 325 488 650 813 975 1138
39 x 6 Throw 9-13 13-20 18-25 22-29 25-32 29-35
NC 20 20 20 23 30 35
Total CFM 350 525 700 875 1050 1225
42 x 6 Throw 9-14 14-21 18-25 23-30 27-34 30-37
NC 20 20 21 24 31 36
Total CFM 375 563 750 938 1125 1313
45 x 6 Throw 10-14 14-21 19-26 24-32 28-35 31-38
NC 20 20 21 24 31 36
Total CFM 400 600 800 1000 1200 1400
48 x 6 Throw 10=15 15-22 20-27 25-32 28-35 32-39
NC 20 20 22 25 32 37
Total CFM 225 338 450 563 675 788
18 x 9 Throw 7-14 10-18 14-21 17-24 19-26 21-28
NC 20 20 20 24 29 34
Total CFM 263 394 525 656 788 919
L-5000
21 x 9 Throw 8-12 11-18 15-22 18-25 22-29 24-31
NC 20 20 20 24 29 34
Total CFM 300 450 600 750 900 1050
24 x 9 Throw 8-12 12-18 16-23 20-27 24-31 26-33
NC 20 20 20 25 30 35
Total CFM 338 506 675 844 1013 1181
27 x 9 Throw 9-13 13-19 17-24 21-28 25-32 28-35
NC 20 20 22 25 31 36
Total CFM 375 563 750 938 1125 1313
30 x 9 Throw 9-13 14-20 18-26 22-29 27-34 29-36
NC 20 20 22 25 31 36
Total CFM 413 619 825 1031 1238 1444
33 x 9 Throw 9-14 14-21 19-27 24-31 28-35 31-38
NC 20 20 22 25 31 36
Total CFM 450 675 900 1125 1350 1575
36 x 9 Throw 10-15 15-22 20-28 25-32 30-37 32-39
NC 20 20 23 27 32 37
Total CFM 488 731 975 1219 1463 1706
39 x 9 Throw 10-15 15-23 20-28 26-33 31-38 34-41
NC 20 20 23 27 32 37

MODEL L5000
Neck Velocity
200 300 400 500 600 700
Ps 0.006 0.013 0.022 0.035 0.05 0.068
DIFFUSERS
Neck Size Pt 0.008 0.018 0.032 0.05 0.072 0.099

CEILING
Total CFM 525 788 1050 1313 1575 1838

42 x 9 Throw 11-16 16-24 21-29 27-34 32-39 35-42
NC 20 20 23 27 32 37
Total CFM 563 844 1125 1406 1688 1969
45 x 9 Throw 11-17 17-25 22-30 28-35 33-40 36-43
NC 20 21 24 28 33 38
Total CFM 600 900 1200 1500 1800 2100
48 x 9 Throw 11-17 17-25 22-30 28-35 34-41 37-44
NC 20 21 24 28 33 38
Total CFM 300 450 600 750 900 1050

18 x 12 Throw 8-16 12-20 15-23 18-26 21-28 23-30
NC 20 20 20 25 30 35
Total CFM 350 525 700 875 1050 1225
21 x 12 Throw 9-14 13-20 17-25 22-29 24-31 26-33
NC 20 20 20 25 30 35
Total CFM 400 600 800 1000 1200 1400
24 x 12 Throw 9-14 14-21 18--26 23-30 25-32 28-35
NC 20 20 21 26 31 36
Total CFM 450 675 900 1125 1350 1575
27 x 12 Throw 10-15 15-22 20-28 24-31 27-34 30-37
NC 20 20 21 26 31 36
Total CFM 500 750 1000 1250 1500 1750
30 x 12 Throw 10-15 15-23 20-28 26-33 28-35 32-39
NC 20 20 22 27 32 37
Total CFM 550 825 1100 1375 1650 1925
L-5000
33 x 12 Throw 11-16 16-24 22-30 27-34 30-37 34-41

NC 20 20 22 27 32 37
Total CFM 600 900 1200 1500 1800 2100
36 x 12 Throw 11-17 17-25 23-31 28-35 32-39 36=43
NC 20 20 23 28 33 38
Total CFM 650 975 1300 1625 1950 2275
39 x 12 Throw 12-18 18-26 24-32 29-36 33-40 37-44
NC 20 20 23 28 33 38
Total CFM 700 1050 1400 1750 2100 2450
42 x 12 Throw 12-18 18-26 24-32 30-37 34-41 38-45
NC 20 20 23 28 33 38
Total CFM 750 1125 1500 1875 2250 2625
45 x 12 Throw 13-19 19-27 25-33 32-39 35-42 40-47
NC 20 20 24 29 34 39
Total CFM 800 1200 1600 2000 2400 2800
48 x 12 Throw 13-19 20-29 26-34 33-40 37-44 41-48
NC 20 20 24 29 34 39
MODEL L5000
Neck Velocity
200 300 400 500 600 700
Ps 0.006 0.013 0.022 0.035 0.05 0.068
DIFFUSERS
Neck Size Pt 0.008 0.018 0.032 0.05 0.072 0.099
CEILING
Total CFM 75 113 150 188 225 263
CFM/Side 38 56 75 94 113 131
18 x 3
Throw 3-5 5-8 7-10 8-12 10-15 12-18
NC 20 20 20 20 24 29
Total CFM 88 131 175 219 263 306
CFM/Side 44 66 88 109 131 153
21 x 3
Throw 3-6 5-8 7-11 9-13 11-16 12-19
NC 20 20 20 20 24 29

Total CFM 100 150 200 250 300 350
CFM/Side 50 75 100 125 150 175
24 x 9
Throw 4-6 6-9 8-11 10-14 11-17 13-20
NC 20 20 20 21 25 30
Total CFM 113 169 225 281 338 394
CFM/Side 56 84 113 141 169 197
27 x 3
Throw 4-6 6-9 8-12 10-15 12-18 14-21
NC 20 20 20 21 25 30
Total CFM 125 188 250 313 375 438
CFM/Side 63 94 125 156 188 219
30 x 3
Throw 4-7 6-10 9-13 11-16 13-19 15-22
NC 20 20 20 22 26 31
Total CFM 138 206 275 344 413 481
CFM/Side 69 103 138 172 206 241
33 x 3
Throw 5-7 7-10 9-13 11-17 13-20 16-23
L-5000
NC 20 20 20 22 26 31
Total CFM 150 225 300 375 450 525
CFM/Side 75 113 150 188 225 263
36 x 3
Throw 5-7 7-11 9-14 12-18 14-21 16-24
NC 20 20 20 23 27 32
Total CFM 163 244 325 406 488 569
CFM/Side 81 122 163 203 244 284
39 x 3
Throw 5-7 7-11 10-15 12-18 15-22 17-25
NC 20 20 20 23 27 32
Total CFM 175 263 350 438 525 613
CFM/Side 88 131 175 219 263 306
42 x 3
Throw 5-8 8-11 10-15 13-19 15-23 18-26
NC 20 20 20 23 27 32
Total CFM 188 281 375 469 563 656
CFM/Side 94 141 188 234 281 328
45 x 3
Throw 5-8 8-12 10-16 13-20 16-24 18-27
NC 20 20 21 24 28 33
Total CFM 200 300 400 500 600 700
CFM/Side 100 150 200 250 300 350
48 x 3
Throw 6-8 8-12 11-16 13-20 16-24 19-28
NC 20 20 21 24 28 33

MODEL L5000
Neck Velocity
200 300 400 500 600 700
Ps 0.006 0.013 0.022 0.035 0.05 0.068
DIFFUSERS
Neck Size Pt 0.008 0.018 0.032 0.05 0.072 0.099

CEILING
Total CFM 150 225 300 375 450 525

CFM/Side 75 113 150 188 225 263
18 x 6
Throw 4-8 7-12 10-15 12-18 14-20 16-21
NC 20 20 20 22 27 32
Total CFM 175 263 350 438 525 613
CFM/Side 88 131 175 219 263 306
21 x 6
Throw 5-8 8-12 11-16 13-19 16-23 19-24
NC 20 20 20 22 27 32
Total CFM 200 300 400 500 600 700

CFM/Side 100 150 200 250 300 350
24 x 6
Throw 6-9 9-13 12-17 14-21 17-24 20-25
NC 20 20 20 23 28 33
Total CFM 225 338 450 563 675 788
CFM/Side 113 169 225 281 338 394
27 x 6
Throw 6-9 9-14 12-18 15-22 18-25 21-26
NC 20 20 20 23 28 33
Total CFM 250 375 500 625 750 875
CFM/Side 125 188 250 313 375 438
30 x 6
Throw 6-10 10-14 13-19 16-23 19-26 22-27
NC 20 20 21 24 29 34
Total CFM 275 413 550 688 825 963
CFM/Side 138 206 275 344 413 481
33 x 6
Throw 7-10 10-15 13-20 17-25 20-27 23-29
L-5000
NC 20 20 21 24 29 34
Total CFM 300 450 600 750 900 1050
CFM/Side 150 225 300 375 450 525
36 x 6
Throw 7-10 10-16 14-21 17-26 21-28 24-30
NC 20 20 22 25 30 35
Total CFM 325 488 650 813 975 1138
CFM/Side 163 244 325 406 488 569
39 x 6
Throw 7-11 11-16 15-22 18-27 22-29 25-32
NC 20 20 22 25 30 35
Total CFM 350 525 700 875 1050 1225
CFM/Side 175 263 350 438 525 613
42 x 6
Throw 8-11 11-17 15-23 19-28 23-30 26-34
NC 20 20 22 25 30 35
Total CFM 375 563 750 938 1125 1313
CFM/Side 188 281 375 469 563 656
45 x 6
Throw 8-12 12-18 16-23 20-29 23-32 27-35
NC 20 20 23 26 31 36
Total CFM 400 600 800 1000 1200 1400
CFM/Side 200 300 400 500 600 700
48 x 6
Throw 8-12 12-18 16-24 20-30 24-33 28-37
NC 20 20 23 26 31 36
MODEL L5000
Neck Velocity
200 300 400 500 600 700
Ps 0.006 0.013 0.022 0.035 0.05 0.068
DIFFUSERS
Neck Size Pt 0.008 0.018 0.032 0.05 0.072 0.099
CEILING
Total CFM 225 338 450 563 675 788
CFM/Side 113 169 225 281 338 394
18 x 9
Throw 5-10 8-14 11-17 14-20 16-22 18-23
NC 20 20 20 24 29 34
Total CFM 263 394 525 656 788 919
CFM/Side 131 197 263 328 394 459
21 x 9
Throw 5-11 8-15 12-18 14-20 17-23 19-24
NC 20 20 20 25 30 35

Total CFM 300 450 600 750 900 1050
CFM/Side 150 225 300 375 450 525
24 x 9
Throw 6-10 10-15 13-19 16-22 19-23 22-27
NC 20 20 20 25 30 35
Total CFM 338 506 675 844 1013 1181
CFM/Side 169 253 338 422 506 591
27 x 9
Throw 7-10 10-15 14-20 17-23 20-25 23-28
NC 20 20 21 25 30 35
Total CFM 375 563 750 938 1125 1313
CFM/Side 188 281 375 469 563 656
30 x 9
Throw 7-11 11-16 14-22 18-25 22-27 25-30
NC 20 20 22 26 31 36
Total CFM 413 619 825 1031 1238 1444
CFM/Side 206 309 413 516 619 722
33 x 9
Throw 8-12 11-17 15-23 19-26 23-28 26-32
L-5000
NC 20 20 22 26 31 36
Total CFM 450 675 900 1125 1350 1575
CFM/Side 225 338 450 563 675 788
36 x 9
Throw 9-12 12-18 16-24 20-28 24-30 27-32
NC 20 20 23 27 32 37
Total CFM 488 731 975 1219 1463 1706
CFM/Side 244 366 488 609 731 853
39 x 9
Throw 8-13 12-18 16-25 20-28 25-31 28-34
NC 20 20 23 27 32 37
Total CFM 525 788 1050 1313 1575 1838
CFM/Side 263 394 525 656 788 919
42 x 9
Throw 8-13 13-19 17-25 21-29 25-32 30-36
NC 20 20 24 28 33 38
Total CFM 563 844 1125 1406 1688 1969
CFM/Side 281 422 563 703 844 984
45 x 9
Throw 9-13 13-20 18-26 22-30 26-34 30-37
NC 20 20 24 28 33 38
Total CFM 600 900 1200 1500 1800 2100
CFM/Side 300 450 600 750 900 1050
48 x 9
Throw 9-14 14-20 18-27 22-32 27-35 31-38
NC 20 20 24 28 33 38

MODEL L5000
Neck Velocity
200 300 400 500 600 700
Ps 0.006 0.013 0.022 0.035 0.05 0.068
DIFFUSERS
Neck Size Pt 0.008 0.018 0.032 0.05 0.072 0.099

CEILING
Total CFM 300 450 600 750 900 1050

CFM/Side 150 225 300 375 450 525
18 x 12
Throw 6-12 9-15 12-19 15-21 17-23 19-25
NC 20 20 20 25 30 35
Total CFM 350 525 700 875 1050 1225
CFM/Side 175 263 350 438 525 613
21 x 12
Throw 6-13 9-16 13-20 15-22 18-24 20-26
NC 20 20 21 26 31 36
Total CFM 400 600 800 1000 1200 1400

CFM/Side 200 300 400 500 600 700
24 x 12
Throw 7-13 10-16 14-21 17-23 20-25 23-28
NC 20 20 21 26 31 36
Total CFM 450 675 900 1125 1350 1575
CFM/Side 225 338 450 563 675 788
27 x 12
Throw 7-13 11-17 15-22 18-24 22-27 24-29
NC 20 20 22 27 32 37
Total CFM 500 750 1000 1250 1500 1750
CFM/Side 250 375 500 625 750 875
30 x 12
Throw 8-14 12-18 15-23 19-25 23-28 26-31
NC 20 20 22 27 32 37
Total CFM 550 825 1100 1375 1650 1925
CFM/Side 275 413 550 688 825 963
33 x 12
Throw 8-14 12-18 16-24 20-26 24-30 27-32
L-5000
NC 20 20 23 28 33 38
Total CFM 600 900 1200 1500 1800 2100
CFM/Side 300 450 600 750 900 1050
36 x 12
Throw 8-14 13-19 17-25 21-27 25-30 28-34
NC 20 20 23 28 33 38
Total CFM 650 975 1300 1625 1950 2275
CFM/Side 325 488 650 813 975 1138
39 x 12
Throw 9-15 13-20 18-26 22-28 26-31 30-35
NC 20 20 23 28 33 38
Total CFM 700 1050 1400 1750 2100 2450
CFM/Side 350 525 700 875 1050 1225
42 x 12
Throw 9-15 14-21 18-27 23-29 27-32 31-36
NC 20 21 24 29 34 39
Total CFM 750 1125 1500 1875 2250 2625
CFM/Side 375 563 750 938 1125 1313
45 x 12
Throw 9-15 14-21 19-28 24-30 28-33 32-38
NC 20 21 24 29 34 39
Total CFM 800 1200 1600 2000 2400 2800
CFM/Side 400 600 800 1000 1200 1400
48 x 12
Throw 10-16 15-22 20-29 24-30 29-34 33-39
NC 20 21 24 29 34 39
MODEL 5500/5500S
The horizontal lip deflection design makes this diffuser excellent for
high capacity applications. The high induction feature ensures draft-free
conditions in low ceiling height applications.
DIFFUSERS
Horizontal lip for rapid mixing of room and primary air
CEILING
Variety of air patterns 3" size increments 1 1/2" vane spacing
Aluminum (model 5500) or steel (model 5500S) construction
Easily removable spring loaded cores no tools required
Optional round neck possible with TR transition
Optional air pattern deflectors (APD)
Optional induction vanes (IV)

5000/5500S

Steel
Models: 5500S-1 Flush Surface Mount - Square or Rectangular Neck
5500S-2 V-Beveled Drop Surface Mount - Square or Rectangular Neck
5500S-6 Lay in T-Bar (12x12 and 24x24 Module) - Square or Rectangular Neck
5500S-8 Lay in Tegular T-Bar - 24 x 24 Module - Square or Rectangular Neck
5500S-9 Donn Fineline - 24 x 24 Module - Square or Rectangular Neck
Model: 5500S-1 ( Flush Surface Mount ) Model: 5500S-8 (Tegular T-Bar)
Ceiling Opening = Listed Size + 2 3

Duct Opening = Listed Size
4 1
1
Neck Size = Listed Size - 8 (Maximum 15 x 15)
2 2
3 1 1 1 Lay-In Filler Panel

DIFFUSERS
14 12 12
16
CEILING
7 7
9 22 8 x 22 8 Overall Face
Face Size A = Listed Size + 5 16
Face Size A = Overall Diffuser = T-Bar Spacing - 1
4
Model: 5500S-2 ( V-Beveled Drop Surface Mount )
Ceilling Opening = Listed Size +1

Model: 5500S-9 (Donn Fineline)
2 Face Size A = Overall Diffuser = 23 3 3
4 x 23 4
Duct Opening = Listed Size - 81
11
(Maximum 15 x 15)
Face Size A = Listed Size + 5

8
3
Model: 5500S-6 ( Lay in T-Bar ) 8
2
11
Neck Size* = Listed Size - 1 2 Lay-In Filler Panel
8
23 3 3
8 x 23 8
2
1
14 1
12
Face Size A = T-Bar Spacing - 41
T-Bar Module = 12 x 12 and 24 x 24
* Filler panel included for neck sizes under 18 x 18 to fit in 24 x 24 T-bar grid,
(6 x 6, 9 x 9, 12 x 12 and 15 x 15 include filler panel).
S1 S2 S3 S4 R1S R2S R3S
(1 Way) (2 Way) (3 Way)

(4 Way)
5000/5500S
SC R4 R1L R2L R3L

Air Patterns
"S" prefix = Square Shape
"R" prefix = Rectangular Shape
Ceiling Opening Size Face Size A

Neck Size 5500S-1 5500S-2 5500S-1 5500S-2 5500S-6 5500S-8 5500S-9
6x6 8 3/4 x 8 3/4 7x7 11 9/16 x 11 9/16 11 x 11 23 3/4 x 23 3/4 23 3/4 x 23 3/4 23 3/4 x 23 3/4
9x9 11 3/4 x 11 3/4 10 x 10 14 9/16 x 14 9/16 14 x 14 23 3/4 x 23 3/4 23 3/4 x 23 3/4 23 3/4 x 23 3/4
12 x 12 14 3/4 x 14 3/4 13 x 13 17 9/16 x 17 9/16 17 x 17 23 3/4 x 23 3/4 23 3/4 x 23 3/4 23 3/4 x 23 3/4
15 x 15 17 3/4 x 17 3/4 13 x 13 20 9/16 x 20 9/16 17 x 17 23 3/4 x 23 3/4 23 3/4 x 23 3/4 23 3/4 x 23 3/4
18 x 18 20 3/4 x 20 3/4 16 x 16 23 9/16 x 23 9/16 20 x 20 23 3/4 x 23 3/4
21 x 21 23 3/4 x 23 3/4 19 x 19 26 9/16 x 26 9/16 23 x 23 23 3/4 x 23 3/4
24 x 24 26 3/4 x 26 3/4 25 x 25 29 9/16 x 29 9/16 29 x 29
DIFFUSERS
CEILING
Submittal: 5500S
ns For Square / Rectangular Louver Ceiling Diffusers Frame Style IV Overall Diffuser Size Ceiling Opening Dimensions Bottom of Duct to Ceiling Line
-1 Neck Size + 5 1/4 Neck Size + 3 1/4 1 1/2
Round Neck
D5 Steel Opposed Blade Damper -2 Neck Size + 4 5/8 Neck Size + 1/2 13/16
D5A Aluminum Opposed Blade Damper
APD Air Pattern Deflector -6 T-Bar Spacing - 1/4 T-Bar Module Size 1 11/16
IV Induction Vanes
Option: Round Neck -8 T-Bar Spacing 1/4 T-Bar Module Size 1 15/16
Round Neck Size
-9 T-Bar Grid Size 1/4 Ceiling Grid Size 1 1/16
3 5
16 Option: APD Air Pattern Deflector Submittal: 5500S
Face Size A* Options For Square / Rectangular Louver Ceiling Diffusers
5000/5500S
Options: D5 Steel Opposed Blade Damper. Steel Optional APD Air Pattern Deflector
Optional D5 or D5A
Option: Round Neck
Duct Size - 58 Option:
D5 IV InductionSteel
VanesOpposed Blade Damper
3 38 APD Air Pattern Deflector
IV
1 1
Induction Vanes
14 12 IV Induction Vane
Damper Operator
Option: Round Neck
Neck Size Ceiling Opening Size Face Size A
Round Neck Size
5500S-1 5500S-2 5500S-1 5500S-2 5500S-6 5500S-8 5500S-9
6 x 6 8 3/4 x 8 3/4 7 x 7 11 9/16 x 11 9/16 11 x 11 23 3/4 x 23 3/4 23 3/4 x 23 3/4 23 3/4 x 23 3/4
9 x 6 11 3/4 x 8 3/4 10 x 7 14 9/16 x 11 9/16 14 x 11 23 3/4 x 23 3/4 23 3/4 x 23 3/4 23 3/4 x 23 3/4
9 x 9 11 3/4 x 11 3/4 10 x 10 14 9/16 x 14 9/16 14 x 14 23 3/4 x 23 3/4 23 3/4 x 23 3/4 23 3/4 x 23 3/4 3 5
16 Option: APD Air Pattern Deflector
12 x 6 14 3/4 x 8 3/4 13 x 7 17 9/16 x 11 9/16 17 x 11 23 3/4 x 23 3/4 23 3/4 x 23 3/4 23 3/4 x 23 3/4
12 x 9 14 3/4 x 11 3/4 13 x 10 17 9/16 x 14 9/16 17 x 14 23 3/4 x 23 3/4 23 3/4 x 23 3/4 23 3/4 x 23 3/4
12 x 12 14 3/4 x 14 3/4 13 x 13 17 9/16 x 17 9/16 17 x 17 23 3/4 x 23 3/4 23 3/4 x 23 3/4 Size
Face 23 3/4A*x 23 3/4
15 x 6 17 3/4 x 8 3/4 16 x 7 20 9/16 x 11 9/16 20 x 11 23 3/4 x 23 3/4 23 3/4 x 23 3/4 23 3/4 x 23 3/4
15 x 9 17 3/4 x 11 3/4 16 x 10 20 9/16 x 14 9/16 20 x 14 Options:
23 3/4 x 23 3/4 D5
23 3/4Steel
x 23Opposed
3/4 23 3/4 Blade
x 23 3/4Damper.
Optional APD Air Pattern Deflector
15 x 12 17 3/4 x 14 3/4 16 x 13 20 9/16 x 17 9/16 20 x 17 23 3/4 x 23 3/4 D5A
23 3/4 Aluminum Opposed
x 23 3/4 23 3/4 x 23 3/4 Blade Damper
15 x 15 17 3/4 x 17 3/4 16 x 16 20 9/16 x 20 9/16 20 x 20 23 3/4 x 23 3/4 23 3/4 x 23 3/4 23 3/4 x 23 3/4
Optional D5 or D5A
18 x 18 20 3/4 x 20 3/4 19 x 19 23 9/16 x 23 9/16 23 x 23 23 3/4 x 23 3/4 - x Duct
- - - 5x
Size - Option: IV Induction Vanes
8 Opposed Blade Damper
21 x 21 23 3/4 x 23 3/4 22 x 22 26 9/16 x 26 9/16 26 x 26 23 3/4 x 23 3/4 - x - - x -
24 x 12 26 3/4 x 14 3/4 25 x 13 29 9/16 x 17 9/16 29 x 17 - x - - x - - x -
24 x 24 26 3/4 x 26 3/4 25 x 25 29 9/16 x 29 9/16 29 x 29 - x - - x - - x - 3
38
: (check if provided)
1 1
ailable Finishes 2. Available Accessories 3. Available Options 4. Construction Details 14 12 IV Induction Vane
ard Finish: ( Shipped Unattached ) IV - Induction Vanes. Available air patterns:
Damper Operator
1 White. Square and Rectangular Necks: APD - Air Pattern Deflectors. S1, S2, S3, S4, R1S, R1L,
al Finish (extra charge): D5 - Steel Rectangular Opposed Blade Border OnlyNeck Size R2S,Opening
Ceiling R2L, R3S, R3L, R4, SC.
Size Face Size A
2 Satin Silver. Damper. Core Only Ceiling
For
5500S-1
Opening
5500S-6 Models Size
5500S-2 5500S-1 5500S-2 5500S-6
Face Size A*
5500S-8 5500S-9
3 Black. D5A - Aluminum Rectangular Opposed Round Necks With TR Deep Only: 21 x 21 neck in 24 x 24
8 Custom Color / Setup Blade Damper. Round Neck6 Size
x 6 8 3/4 x
5500S-1* 8 3/4 7 x 7 11
5500S-2*
Module is available in S4
9/16 x 11 9/16 11
5500S-1* x 11 23 3/4 x 23 3/4 23 3/4
5500S-2* x 23 3/4 23 3/4
5500S-6* x 23 3/4
5500S-8* 5500S-9*
harge L9 - Rectangular Equalizing Grid. 9 x 6 11 3/4 x pattern
8 3/4 only.
10 x 7 14 9/16 x 11 9/16 14 x 11 23 3/4 x 23 3/4 23 3/4 x 23 3/4 23 3/4 x 23 3/4
TR - Square to Round Transition. 6 9 x 9 118 3/4
3/4
D5 -xxDamper
811
3/43/4not10available
x 107with
x147 9/16 x 11149/16
9/16x 11
14 9/16
x 14 11 x 11
23 3/4 x 23 3/4 233/4
23 3/4 xx 23233/4
3/4 2323
3/43/4x x 23 3/4
23 3/4 23 3/4 x 23 3/4
TR - Deep. 12 x 6 14 3/4 xintegral8 3/4Round
13 Neck
x 7 17 9/16 x 11 9/16 17 x 11 23 3/4 x 23 3/4 23 3/4 x 23 3/4 23 3/4 x 23 3/4
Round Necks: 8 12 x 9 14 11 3/4
3/4 xx 11 3/4 10
11 3/4 13 x 10 17 9/16
x 10 x
14149/16 x 14 9/16
9/16 17 x 14
14 x 14
23 3/4 x 23 3/4
23 3/4 x 23 3/4
23 3/4 x 23 3/4
23 3/4 x 23
23 3/4 x 23 3/4
3/4 23 3/4 x 23 3/4
G3 - Equalizing Grid
BDS - Butterfly Damper
10 12 x 12 1414 3/4
3/4 xx 14143/4
3/4 13 x 13 13 x17139/16 x 17179/16
9/16x 17
17 9/16
x 17 23 3/4 x 23 3/4
17 x 17 23
233/4
3/4 xx 23233/4
3/4 2323
3/43/4x x 23
23 3/4
3/4 23 3/4 x 23 3/4
15 x 6 17 3/4 x 8 3/4 16 x 7 20 9/16 x 11 9/16 20 x 11 23 3/4 x 23 3/4 23 3/4 x 23 3/4 23 3/4 x 23 3/4
RSD - Radial Shutter Damper
12 15 x 9 17 14 3/4
3/4 xx 14113/4
3/4 16 x 10 13 x20139/16 x 17149/16
9/16x 17
20 9/16
x 14 17 x 17
23 3/4 x 23 3/4 233/4
23 3/4 x 23233/43/4 2323
3/43/4x x 23
23 3/4
3/4 23 3/4 x 23 3/4
15 x 12 17 3/4 x 14 3/4 16 x 13 20 9/16 x 17 9/16 20 x 17 23 3/4 x 23 3/4 23 3/4 x 23 3/4 23 3/4 x 23 3/4
on: A Date: 11/2013 14 15 x 15are17
Dimensions 17in3/4
3/4Inches
xx 17
173/4
3/4 Page:
16 x 16 16 2x2016
of9/16
2 x 20209/16
9/16x 20
20 9/16
x 20 20 x 20
23 3/4 x 23 3/4 233/4
23 3/4 xx 23233/4
3/4 2323
3/43/4x x 23
23 3/4
3/4 23 3/4 x 23 3/4
Metal Industries, Inc. Clearwater, FL (727) 441 - 2651 Fax (800) 865 8383
16 18 x 18 20
www.metalaire.com
20 3/4
3/4 xx 20203/4
3/4 19 x 19 23 9/16
[email protected]
19 x 19 x
23239/16
9/16 23 x 23
x 23 9/16 23 3/4 x 23 3/4
23 x 23 23- 3/4 xx23 3/4'- - x -
21 x 21 23 3/4 x 23 3/4 22 x 22 26 9/16 x 26 9/16 26 x 26 23 3/4 x 23 3/4 - x - - x -
24 x 12 26 3/4 x 14 3/4 25 x 13 29 9/16 x 17 9/16 29 x 17 - x - - x - - x -
24 x 24 26 3/4 x 26 3/4 25 x 25 29 9/16 x 29 9/16 29 x 29 - x - - x - - x -
2013 Metal Industries, Inc. Notes: (check if provided) CD61

Standard Finish: ( Shipped Unattached ) IV - Induction Vanes. Available air patterns:
SERIES 5500 ALUMINUM SPECIFICATIONS
Air Diffusers shall be model: Air Diffusers shall be aluminum model 5500
5500-1 Surface Mount manufactured by METALAIRE. Units shall consist of a
5500-4 Drop Face fixed-pattern louvered core fastened into a border with
5000-2 V Beveled Drop Face spring loaded latches. Core shall be removable without
the use of tools. Diffusers shall be engineered to perform
DIFFUSERS
5500-46 Drop Face T-bar Lay-in

CEILING
in variable volume systems and include deflector blades

5500-6 T-bar Lay-in with a horizontal lip to provide longer Throw distances.
5500-7 Concealed Spline The units shall be the size and quantity as outlined in the
5500-8 Tegular Lay-in plans and specifications.
5500-9 Donn Fineline Lay-in Diffusers shall be available in 1, 2-way opposite,
ceiling system.
SERIES 5500S STEEL SPECIFICATIONS

Air Diffusers shall be model: IV INDUCTION VANES
5500S-1 Surface Mount Units shall include IV induction vanes factory mounted
5000-2 V Beveled Drop Face onto the back side of the deflector vanes. IV vanes shall
5500S-6 T-bar Lay-in increase the induction rate of the diffuser.
5500S-8 Tegular Lay-in Accessories
5500S-9 Donn Fineline Lay-in
OPTIONAL DAMPERS
Air Diffusers shall be steel model 5500S manufactured by
METALAIRE. Units shall consist of a fixed pattern louvered
Aluminum D5A or Steel D5 opposed blade dampers shall
be provided. Damper shall be adjusted using a handle
core fastened into a border with spring loaded latches.
accessible through the face of the diffuser. Screwdriver
Core shall be removable without the use of tools. Diffusers
slot operators are not allowed.
5000/5500S
shall be engineered to perform in variable volume systems

and include deflector blades with a horizontal lip to
provide longer throw distances. The units shall be the size
and quantity as outlined in the plans and specifications.
Diffusers shall be available in 1, 2-way opposite, 2-way ASHRAE Standard 70-2006.
corner, 3, and 4-way directional air patterns. Units shall
be designed to integrate into the specified ceiling system. Paint Specification
Options
ADJUSTABLE PATTERN including a pressurized spray stage using an alkaline
(HORIZONTAL TO VERTICAL) cleaner and a de-ionized water rinse.
Diffusers shall include adjustable air pattern deflector
blades that allows the air pattern to be set from vertical
to horizontal (Optional APD Air Pattern Deflectors). Air
pattern deflector blades shall be accessible from the face
and the diffuser and adjustable without the use of tools.
Neck
Model 6 9 12 15 18 21 24 27 30 33 36 36 42 45 48
5500-1 Surface Mount - Aluminum 6 X
DIFFUSERS
5500-2 Beveled Drop Surface Mount - Aluminum 9 X X
CEILING
12 X X X
15 X X X X
18 X X X X X
21 X X X X X X
24 X X X X X X X
27 X X X X X X X X


5000/5500S
R1L Rct 1-Way long
R3L Rct 3-Way long
R4 Rct 4-Way

Neck
Model Panel 6 9 12 15 18 21 24 27 30 33 36 39 42 45
6 X
12 x 12
5500-6 T-bar Lay-in - Aluminum
DIFFUSERS
9 X
CEILING
6 X
5500-6 T-bar Lay-in - Aluminum 9 X X
5500-7 Concealed Spline - Aluminum 12 X X X
24 x 24
5500-8 Tegular T-bar - Aluminum 15 X X X X
5500-9 Donn Fineline / Bolt Slot - Aluminum 18 X
21 X
6 X
9 X X
12 X X X
15 X X X X
18 X X X X
36 x 24

21 X X X X
24 X X X X
27 X X X X
30 X
33 X
6 X
9 X X
12 X X X
15 X X X X
18 X X X X
21 X X X X
24 X X X X
48 x 24

27 X X X X
5000/5500S
30 X X X X
33 X X X X
36 X X X X
39 X X X X
42 X
45 X
6 X
9 X X
12 X X X
15 X X X X
18 X X X X X
21 X X X X X X
24 X X X X X X X
48 x 48
5500-6 T-bar Lay-in

27 X X X X X X X X
42 X
45 X
DIFFUSERS
CEILING
S1 Sq 1-Way FGBP (24 x 24 Only) Factory installed R6 insulation 02 Satin Silver
S2 Sq 2-Way TR Square to Round Transition 03 Black
S3 Sq 3-Way TR Deep (Used with Damper) Deep Square to Round Transition 24 Mill
SC Sq 2-Way corner G3 Round Equalizing Grid 28 Custom Color
R1S Rct 1-Way short BDS Butterfly Damper
R1L Rct 1-Way long RSD Radial Shutter Damper
R2S Rct 2-Way short

R2L Rct 2-Way long Available Options
R3S Rct 3-Way short IV Induction Vanes
R3L Rct 3-Way long APD Air Pattern Deflectors
R4 Rct 4-Way
5000/5500S

5500S MODEL NUMBER SPECIFICATION
Neck
Model 6 9 12 15 18 21 24
5500S-1 Surface Mount - Steel 6 X
DIFFUSERS
5500S-2 Beveled Drop Surface Mount - Steel 9 X X

CEILING
12 X X X
15 X X X X
18 X X X X X
21 X X X X X X
24 X X X X X X X


S3 Sq 3-Way G3 Round Equalizing Grid 28 Custom Color
SC Sq 2-Way corner BDS Butterfly Damper
R1L Rct 1-Way long
R2S Rct 2-Way short
5000/5500S

R4 Rct 4-Way
Neck
Model Panel 6 9 12 15 18 21
5500S-6 T-bar Lay-in - Steel 6 X
DIFFUSERS
5500S-8 Tegular T-bar - Steel 9 X X
CEILING
5500S-9 Donn Fineline / Bolt Slot - Steel 12 X X X
24 x 24
15 X X X X
18 X
21 X


S1 Sq 1-Way FGBP (24 x 24 Only) Factory installed R6 insulation 02 Satin Silver
S2 Sq 2-Way TR Square to Round Transition 03 Black
S3 Sq 3-Way TR Deep (Used with Damper) Deep Square to Round Transition 28 Custom Color
SC Sq 2-Way corner G3 Round Equalizing Grid
R1S Rct 1-Way short BDS Butterfly Damper
R1L Rct 1-Way long RSD Radial Shutter Damper
R2S Rct 2-Way short
R4 Rct 4-Way
5000/5500S

MODEL 5500/5500S
Neck Velocity
200 300 400 500 600 700
Ps 0.006 0.013 0.022 0.035 0.05 0.068
DIFFUSERS
Neck Size Pt 0.008 0.018 0.032 0.05 0.072 0.099

CEILING
Total CFM 50 75 100 125 150 175

6x6 Throw 5-9 8-15 13-20 18-26 22-31 26-37
NC - - - - 23 28
Total CFM 113 169 225 281 338 394
9x9 Throw 8-16 12-21 17-27 22-32 27-38 31-44
NC - - - 24 29 700
Total CFM 200 300 400 500 600 35-50
12 x 12 Throw 11-22 16-27 21-33 26-38 31-44 37

NC - - 22 27 32 1094
Total CFM 313 469 625 781 938 37-52
15 x 15 Throw 12-24 17-30 23-35 28-41 33-47 39
NC - - 24 29 34 1575
Total CFM 450 675 900 1125 1350 40-56
18 x 18 Throw 14-26 22-32 33-45 36-48 38-52 40
NC - 20 25 30 35 2144
Total CFM 613 919 1225 1531 1837 42-58
21 x 21 Throw 16-28 26-34 33-43 37-51 40-55 41
NC - 21 26 31 36 2800
Total CFM 800 1200 1600 2000 2400 44-61
24 x 24
5000/5500S
Throw 19-29 28-36 39-45 40-53 41-59 42

NC - 22 27 32 37 3544
Total CFM 1013 1519 2025 2531 3037 46-64
27 x 27 Throw 21-31 30-39 35-49 41-55 43-60 43
NC - 23 28 33 38
SERIES 5500 PERFORMANCE DATA/2-WAY SQUARE PATTERN (S2 SC)
MODEL 5500/5500S
Neck Velocity
200 300 400 500 600 700
Ps 0.006 0.013 0.022 0.035 0.05 0.068
DIFFUSERS
Neck Size Pt 0.008 0.018 0.032 0.05 0.072 0.099
CEILING
Total CFM 50 75 100 125 150 175
CFM/Side 25 38 50 63 75 88
6x6
Throw 3-6 7-2 11-17 16-23 20-28 24-34
NC - - - - 23 28
Total CFM 113 169 225 281 338 394
CFM/Side 56 84 113 141 169 197
9x9
Throw 5-10 9-15 13-21 18-27 23-32 27-38

NC - - - 24 29 34
Total CFM 200 300 400 500 600 700
CFM/Side 100 150 200 250 300 350
12 x 12
Throw 7-14 12-20 16-26 21-31 26-37 30-42
NC - - 22 27 32 37
Total CFM 313 469 625 781 938 1094
CFM/Side 156 234 313 391 469 547
15 x 15
Throw 10-19 14-25 19-30 25-36 30-41 33-47
NC - - 24 29 34 39
Total CFM 450 675 900 1125 1350 1575
CFM/Side 225 338 450 563 675 788
18 x 18
Throw 12-23 16-28 22-34 27-39 32-45 36-51
5000/5500S
NC - 20 25 30 35 40
Total CFM 613 919 1225 1531 1837 2144
CFM/Side 306 459 613 766 919 1072
21 x 21
Throw 12-24 17-30 23-35 28-41 33-47 37-52
NC - 21 26 31 36 41
Total CFM 800 1200 1600 2000 2400 2800
CFM/Side 400 600 800 1000 1200 1400
24 x 24
Throw 12-22 16-28 21-34 27-39 32-45 36-50
NC - 22 27 32 37 42
Total CFM 1013 1519 2025 2531 3037 3544
CFM/Side 506 759 1013 1206 1519 1772
27 x 27
Throw 8-15 12-21 17-27 22-32 27-38 31-43
NC - 23 28 33 38 43

SERIES 5500 PERFORMANCE DATA/3-WAY RECTANGULAR PATTERN (S3)
MODEL 5500/5500S
Neck Velocity
Ps 200 300 400 500 600 700
Pt .006 .013 .022 .035 .050 .068
DIFFUSERS
.008 .018 .032 .050 .072 .099

CEILING
Neck Side
Size Designation A B A B A B A B A B A B
Total CFM 50 75 100 125 150 175
CFM/Side 19 13 28 19 38 25 47 31 56 38 66 44
6x6
Throw 3-5 2-4 6-11 6-10 10-16 10-16 15-22 15-21 20-28 19-27 24-33 23-32
NC - - - - 23 28
Total CFM 113 169 225 281 338 394
CFM/Side 42 28 63 42 84 56 105 70 127 84 148 98
9x9
Throw 4-8 3-6 8-14 7-12 12-19 11-18 17-25 16-23 22-31 21-29 26-36 24-34
NC - - - 24 29 34
Total CFM 200 300 400 500 600 700
CFM/Side 75 50 113 75 150 100 188 125 225 150 263 175
12 x 12
Throw 6-12 5-9 10-17 8-15 15-23 13-20 20-29 18-26 24-34 22-31 28-40 26-37
NC - - 22 27 32 37
Total CFM 313 469 625 781 938 1094
CFM/Side 75 50 176 117 234 156 293 195 352 234 410 273
15 x 15
Throw 6-12 5-9 12-22 10-18 17-27 15-23 23-33 20-29 27-38 25-35 31-44 29-40
NC - - 24 29 34 39
Total CFM 450 675 900 1125 1350 1575
CFM/Side 169 113 253 169 338 225 422 281 506 338 591 394
18 x 18
5000/5500S
Throw 10-20 8-16 15-25 12-21 20-31 17-27 25-37 22-32 30-42 27-38 34-48 31-44
NC - 20 25 30 35 40
Total CFM 613 919 1225 1531 1837 2144
CFM/Side 230 153 345 230 459 306 574 383 689 459 804 536
21 x 21
Throw 12-23 10-19 16-28 14-24 22-34 19-30 27-40 24-36 32-45 29-41 36-51 33-47
NC - 21 16 31 36 41
Total CFM 800 1200 1600 2000 2400 2800
CFM/Side 300 200 450 300 600 400 750 500 900 600 1050 700
24 x 24
Throw 12-24 11-22 17-30 16-27 23-35 21-33 28-41 26-38 33-47 31-44 37-52 35-50
NC - 22 27 32 37 42
Total CFM 1013 1519 2025 2531 3037 3544
CFM/Side 380 253 570 380 759 506 949 633 1139 759 1329 886
27 x 27
Throw 12-23 12-24 17-29 17-19 22-34 22-35 27-40 28-40 32-46 33-46 36-51 37-52
NC - 23 28 33 38 43
MODEL 5500/5500S
Neck Velocity
200 300 400 500 600 700 800
Ps .011 .024 .044 .067 .097 .131 .131
DIFFUSERS
Neck Size Pt .014 .030 .054 .083 .119 .161 .161
CEILING
Total CFM 113 169 225 281 338 394 450
CFM/Side 28 42 56 70 84 98 113
6x6
Throw 5 6 11 13 14 15 15
NC - - - 15 20 25 25
Total CFM 113 169 225 281 338 394 450
CFM/Side 28 42 56 70 84 98 113
9x9
Throw 8 10 16 19 20 21 21
NC - - - 17 22 27 27
Total CFM 200 300 400 500 600 700 800

CFM/Side 50 75 100 125 150 175 200
12 x 12
Throw 11 15 21 25 26 27 27
NC - - 18 19 24 29 29
Total CFM 313 469 625 781 938 1094 1250
CFM/Side 78 117 156 195 234 273 313
15 x 15
Throw 14 19 26 31 33 34 34
NC - - 18 23 28 32 32
Total CFM 450 675 900 1125 1350 1575 1800
CFM/Side 113 169 225 281 338 394 450
18 x 18
Throw 16 23 31 37 40 41 41
NC - - 18 23 28 33 33
Total CFM 613 919 1225 1531 1838 2144 2450
CFM/Side 153 230 306 383 459 536 613
21 x 21
Throw 19 27 36 43 46 48 48
NC - - 19 24 29 34 34
5000/5500S
Total CFM 800 1200 1600 2000 2400 2800 3200
CFM/Side 200 300 400 500 600 700 800
24 x 24
Throw 22 30 42 50 53 55 55
NC - 15 20 25 35 35
Total CFM 10313 1519 2025 2531 30 3544 4050
CFM/Side 253 380 506 633 3038 886 1013
27 x 27
Throw 25 34 44 56 759 61 61
NC - 16 21 26 59 36 36
Total CFM 1513 2269 3025 3781 31 5294 6050
CFM/Side 378 567 756 945 4538 1323 1513
33 x 33
Throw 30 42 56 68 1134 75 75
NC - 17 22 27 73 37 37
Total CFM 1800 2700 3600 4500 32 6300 7200
CFM/Side 450 675 900 1125 5400 1575 1800
48 x 48
Throw 31 43 59 71 1350 75 75
NC 16 18 24 29 75 38 38

PERFORMANCE NOTES FOR SERIES 5500/5000S
All data is tested in accordance with ANSI/ASHRAE 70-2006 .
DEFINITION OF UNITS
Horizontal Throw Throw distance in feet at terminal velocities of 150fpm, 100fpm and 50fpm.
DIFFUSERS
CEILING

Ps -H Static pressure horizontal
Ps-V Static pressure vertical
Pt V Total pressure vertical
Throw H C Throw horizontal cooling
Throw V C Throw vertical cooling
Throw V H Vertical heating
5000/5500S
MODEL 5500DD
Model 5500DD is an architectural diffuser designed to excel in both
performance and aesthetic
Tag: appeal. It is available in both supply and
Engineer:
return models.
DIFFUSERS

Design accepts all popular ceiling
Location: tiles (by others)
Architect:
CEILING
Date: Submitted By:
4-way air pattern

Architectural Deflection Diffusers
Submittal: 5500 DD
Aluminum - Fixed Louvered Face
Designed to allow the ceiling tile to be installed (by others) from the face without having to remove the plenum.
Models: 5500DD (DDI)-6 Supply - Non Insulated (Insulated) - T-Bar Lay in
Optional metal(DDI)-8
5500DD face shipped loose
Supply or welded
- Non in place
Insulated (Insulated) - Tegular T-Bar
5500DD (DDI)-9 Supply - Non Insulated (Insulated) - 24x24 Donn (USG) Ceiling Grid
Available with one through
5500 DDR-6
four slots
Return - Non Insulated - T-Bar Lay in
5500 DDR-8 Return - Non Insulated - Tegular T-Bar
5500 DDR-9 Return - Non Insulated - 24x24 Donn (USG) Ceiling Grid

Model: 5500DD-6 = Lay in T-Bar Non Insulated Model: 5500DDR-6 = Lay in T-Bar
Model: 5500DDI-6 = Lay in T-Bar Insulated
1
Duct Size - 4
Optional Internal
Insulation Light Shield
2"
Return Air Opening

Ceiling Tile By Others 7" 7"
(Open to Air)
(* See Available Accessories) Ceiling Tee
Ceiling Tee By Others
By Others
1 1/2" W 1 1/2" Ceiling Tile By Others W

"A" "A" (* See Available Accessories)
23 3
4" 23 3
4"
Model: 5500DD-8 = Tegular T-Bar Non Insulated Model: 5500DDR-8 = Tegular T-Bar
Model: 5500DDI-8 = Tegular T-Bar Insulated
1
Duct Size - 4
Optional Internal
2"
5500DD
7" Return Air Opening 7"
Ceiling Tile By Others
(Open to Air)
Ceiling Tee (* See Available Accessories) Ceiling Tee
By Others By Others

23 3
4" 23 3
4"
Model: 5500DD-9 = 24x24 Donn (USG) Ceiling Grid Non Insulated Model: 5500DDR-9 = 24x24 Donn (USG) Ceiling Grid
Model: 5500DDI-9 = 24x24 Donn (USG) Ceiling Grid Insulated
1
Duct Size - 4
Optional Internal
2"
7" Return Air Opening 7"

Ceiling Tile By Others
(Open to Air)
Ceiling Tee (* See Available Accessories) Ceiling Tee
By Others By Others

23 3
4" 23 3
4"
1 Slot 2 Slot 3 Slot 4 Slot

MODEL Dim. W
Dim. A Dim. A Dim. A Dim. A Air Patterns
5500DD 1 1/8 3 5/16 4 13/16 6 5/16 7 13/16
Available with 1, 2, 3 and 4 Slots.
(5500DD 3 SLOT UNIT SHOWN)

1 SLOT 2 SLOT 3 SLOT 4 SLOT
1. Available
Model Finishes
Dim W 2. Available
Dimension A Accessories 4. Construction Details
Standard Finish 03 Aluminum Radial Opposed Blade Damper. Insulated units have 1/2" Tuffskin insulation.
5500DD 1 1/8 3 5/16
01 White with Black Plenum.
4 13/16 6 5/16
G3 Round Equalizing Grid.
7 13/16 Center Ceiling Tile supplied by others, field
installed.
Optional Finishes ( additional charge): BDS Round Damper.
Return units are non-ducted, with light shields.
03 Black. RSD Radial Shutter Round Damper. Available with 3/4" spacer with 1,2,3 and 4 slots
2013 Metal08 - 19. Inc.
Industries, TBPF T-Bar Plaster Frame. (3 slot units shown above). CD73
*Painted Aluminum Filler Panel Shipped
Loose For Field Instalation.
SERIES 5500DD SPECIFICATION
SUPPLY LOUVERED FACE Diffuser shall be one through four slots. The diffuser shall
ALUMINUM/SERIES 5500DD (DDI) be designed to integrate with the ceiling type. Face shall
have fixed louvers designed to match the appearance of
Insulated / Non-Insulated the supply unit.
5500DDI-6 T-bar Lay-in Insulated
DIFFUSERS
CEILING
5500DD-6 T-bar Lay-in Round Neck Optional Dampers and Accessories

5500DDI-8 Tegular T-bar Insulated BUTTERFLY DAMPER
5500DD-8 Tegular T-bar METALAIRE model BDS aluminum round butterfly type
5500DDI-9 Donn Fineline / Bolt Slot Insulated dampers shall be provided. Damper shall consist of
5500DD-9 Donn Fineline / Bolt Slot two butterfly style blades that can be adjusted from full
Air Diffusers shall be model 5500DDI (insulated) or
screwdriver slot that can be accessed through the face
5500DD (non-insulated) manufactured by METALAIRE.
of the diffuser.
Units shall be square face ceiling supply diffusers and

shall have a factory attached back. Back pan must be RADIAL SHUTTER DAMPER
of sufficient height to allow center tile (by the ceiling METALAIRE model RSD steel round radial shutter damper
system manufacturer) to be installed from the diffuser
face without disconnecting the face from the back pan.
radial blades that slide perpendicular to air flow direction.
Devices without back pan attached to the diffuser face
The damper shall be adjusted from full open to full closed.
will not be allowed.
The units shall be the size and quantity as outlined in the be accessed through the face of the diffuser.
Diffuser shall be one through four slots. The diffuser shall
be designed to integrate with the ceiling type. METALAIRE model D3 aluminum or SD3 Steel round
RETURN SQUARE AND shall consist of gang operated blades that can be
RECTANGULAR LOUVERED FACE adjusted from full open to full closed. Damper shall be
ALUMINUM/SERIES 5500DDR adjusted with a screwdriver slot that can be accessed
5500DD
through the face of the diffuser.

Non-Insulated
5500DDR-6 T-bar Lay-in Performance Specification
5500DDR-8 Tegular T-bar The manufacturer shall provide published performance
5500DDR-9 Donn Fineline
Air Inlets shall be model 5500DD manufactured by
METALAIRE. Units shall be square face ceiling return or Paint Specification
exhaust diffusers and shall have a factory attached light Process shall be anodic electro-deposition using an
shield. Light shield must be of sufficient height to allow anodic acrylic paint. Units shall undergo pre-treatment
center tile (by the ceiling system manufacturer) to be including a pressurized spray stage using an alkaline
installed from the diffuser face without disconnecting cleaner and de-ionized water rinse.
the face from the back pan. Devices without light shield
attached to the diffuser face will not be allowed. The
units shall be the size and quantity as outlined in the
5500DD MODEL NUMBER SPECIFICATION
SUPPLY FIXED LOUVERED FACE ARCHITECTURAL DIFFUSER
Model # Slots Inlet Size Module Available Finishes
5500DD-6 T-Bar Lay-in 1 6 Standard
5500DDI-6 T-Bar Lay-in Insulated 2 8 01 White
DIFFUSERS
5500DD-8 Tegular T-Bar 3 10 Optional
CEILING
24 x 24
5500DDI-8 Tegular T-Bar Insulated 4 12 02 Satin Silver
5500DD-9 Donn Fineline 14 03 Black
5500DDI-9 Donn Fineline Insulated 16 28 Custom Color
D3 Aluminum Radial Opposed Blade Damper
SD3 Steel Radial Opposed Blade Damper

RSD Radial Shutter Damper
CP Center Metal Panel Loose
CPW Center Metal Panel Welded
Available Options
CC Closed Cell foam insulation
EI External foil back insulation
5500DDR MODEL NUMBER SPECIFICATION
5500DD
RETURN FIXED LOUVERED FACE ARCHITECTURAL DIFFUSER
MODEL 5500DDR
Model # Slots Module Available Finishes
5500DDR-6 T-Bar Lay-in 1 Standard
5500DDR-8 Tegular T-Bar 2 24 x 24 01 White
5500DDR-9 Donn Fineline 3 Optional
02 Satin Silver
03 Black
28 Custom Color

SERIES 5500DD PERFORMANCE DATA
MODEL 5500DD, 5500DDI SUPPLY
CFM 50 100 150 200 250 300 350
1 Slot Pt 0.01 0.03 0.07 0.13 0.20 0.30 0.40

24 x 1 Ps 0.007 0.024 0.058 0.109 0.168 0.254 0.337
DIFFUSERS
8 Inlet NC <20 <20 22 28 33 38 41

CEILING
Throw 2-3-5 4-5-7 5-6-9 6-8-10 7-9-12 8-11-14 9-12-16

CFM 100 150 200 250 300 350 400
2 Slot Pt 0.02 0.05 0.08 0.12 0.18 0.24 0.31

24 x 2 Ps 0.014 0.038 0.059 0.088 0.134 0.177 0.227
8 Inlet NC <20 <20 22 28 33 38 41
Throw 2-3-5 3-5-7 4-6-8 4-7-9 5-8-11 6-9-12 7-10-13
CFM 150 200 250 300 350 400 450
3 Slot Pt 0.03 0.06 0.09 0.13 0.18 0.23 0.30

24 x 3 Ps 0.018 0.039 0.058 0.084 0.117 0.147 0.194
8 Inlet NC <20 <20 25 30 34 38 41
Throw 3-4-6 4-5-7 4-6-8 5-7-9 5-8-10 6-9-12 7-10-14
CFM 200 250 300 350 400 450 500
4 Slot Pt 0.05 0.08 0.11 0.16 0.20 0.26 0.32

24 x 4 Ps 0.029 0.048 0.064 0.097 0.117 0.154 0.195
8 Inlet NC <20 23 28 32 36 39 42
Throw 3-4-9 3-5-7 4-6-8 5-7-10 5-8-11 6-9-12 6-10-13
CFM 250 300 350 400 450 500 550
4 Slot Pt 0.061 0.085 0.123 0.151 0.196 0.247 0.298

24 x 4 Ps 0.48 0.085 0.123 0.151 0.196 0.247 0.298
10 Inlet
5500DD
NC 20 25 29 33 36 39 41
Throw 3-5-7 4-6-8 5-7-10 5-8-11 6-9-12 6-10-13 7-10-14
Inlet Size 6 8 10 12 14 16
Ft .196 .349 .545 .785 1.070 1.400
fpm 300 400 500 600 700 800 900 1000 1100 1200 1400 1600
Pv .006 .010 .016 .023 .031 .040 .051 .063 .075 .090 .122 .160
PERFORMANCE NOTES FOR SERIES 5500DD

DEFINITION OF UNITS
Throw Throw distance in feet at terminal velocities of 150fpm, 100fpm and 50fpm
fpm Velocity of air stream in Feet per Minute. To determine total pressure for other inlet sizes, divide the CFM
by the sq footage of the inlet size (chart above). The result is the duct velocity in fpm. From the Pv chart,
determine the Pv and add it to the Ps shown in the performance chart to determine the Pt
SERIES 5500DDR PERFORMANCE DATA
MODEL 5500DDR RETURN
CFM 100 125 165 200 225 275
1 Slot NC <20 20 27 25 30 35
Ps -.020 -.030 -.060 -.080 -.100 -.150
DIFFUSERS
CFM 155 190 250 310 345 425
CEILING
2 Slot NC <20 22 24 27 32 37
Ps -.020 -.030 -.060 -.080 -.100 -.150
CFM 225 275 360 450 505 620
3 Slot NC 21 24 25 29 34 38
Ps -.020 -.030 -.060 -.080 -.100 -.150
CFM 295 350 430 590 660 810
4 Slot NC 22 25 27 30 35 40

Ps -.020 -.030 -.060 -.080 -.100 -.150
PERFORMANCE NOTES FOR SERIES 5500DDR

DEFINITION OF UNITS
5500DD

MODEL 5200
The Model 5200 is an economical diffuser designed for industrial,
commercial and light commercial applications. The 5200 is available
in square sizes only up to 24 x 24.
DIFFUSERS
CEILING
Removable core for concealed mounting
Square neck sizes only in 2" increments with 1" vane spacing
Flush, T-bar Lay-in or beveled frames

Available Neck Sizes

-1 & -2 Frame -8 Frame
6x6 6x6
8x8 8x8
10 x 10 10 x 10
5200
12 x 12 12 x 12
14 x 14 14 x 14
16 x 16 16 x 16
18 x 18 18 x 18
20 x 20 20 x 20
4-Way Only

5200-1 Surface Mount The manufacturer shall provide published performance
5200-2 V-Beveled data. Data shall be tested in accordance to ANSI/
5200-6 T-bar Lay-in
DIFFUSERS
CEILING
Air Diffusers shall be aluminum model 5200 manufactured Paint Specification
by METALAIRE. Units shall consist of a fixed pattern Process shall be anodic electro-deposition using an
louvered core fastened into a border with spring loaded anodic acrylic paint. Units shall undergo pre-treatment
latches. Core shall be removable without the use of tools. including a pressurized spray stage using an alkaline
The units shall be the size and quantity outlined in the cleaner and a de-ionized water rinse.
Diffusers shall be available in 1, 2-way opposite, 2-way
corner, 3, and 4-way directional air patterns. Units shall

be designed to integrate into the specified ceiling system.
Accessories
OPTIONAL DAMPERS:
Aluminum DA opposed blade dampers shall be provided.
Damper shall be adjusted using a handle accessible
Screwdriver slot operators are not allowed.
5200

LOUVERED FACE CEILING DIFFUSER SQUARE/ALUMINUM
Model Width Height Air Pattern Available Finishes
5200-1 Surface Mount 6 6 Standard
5200-2 Beveled Drop Surface Mount 8 8 S4 Sq 4-Way 01 White
DIFFUSERS
10 10 Optional
CEILING
12 12 S1 1-Way 02 Satin Silver

14 14 S2 Sq 2-Way 03 Black
16 16 S3 Sq 3-Way 24 Mill
18 18 SC Sq 2-Way corner 28 Custom Color
20 20
22 22 S4 Sq 4-Way Only
24 24
DA Aluminum Opposed Blade Damper
Available Options
NSH No Screw Holes
SH Screw Holes
Model Panel Width Height Air Pattern Available Finishes

5200-6 T-bar Lay-in 24 x 24 6 6 Standard
5200
8 8 S4 Sq 4-Way 01 White
10 10 Optional
12 12 S1 Sq 1-Way 02 Satin Silver
14 14 S2 Sq 2-Way 03 Black
16 16 S3 Sq 3-Way 24 Mill
18 18 SC Sq 2-Way corner 28 Custom Color
20 20 S4 Sq 4-Way Only
DA Aluminum Opposed Blade Damper
Available Options
NSH No Screw Holes
SH Screw Holes
MODEL 5200
CFM Outlet Size 6x6 8x8 10 x 10 12 x 12 14 x 14 16 x 16 20 x 20 22 x 22 24 x 24
Vn 400 225 114 100
100 Ps 0.004 0.001 0.001 0.001
DIFFUSERS
Throw 12-17-14-12 17-14-12-10 14-12-10-9 12-10-8-7
CEILING
Vn 800 450 288 200 147
200 Ps 0.014 0.004 0.002 0.001 0.001
Throw 33-27-23-20 27-22-19-16 23-19-16-14 21-17-14-12 18-15-13-11
Vn 675 432 300 220
300 Ps 0.008 0.004 0.002 0.001
Throw 35-30-25-22 35-30-25-22 27-22-19-15 24-20-17-15
Vn 900 576 400 294

400 Ps 0.019 0.008 0.004 0.002
Throw 47-39-32-29 40-34-28-24 35-30-25-22 32-27-22-19
Vn 864 600 441 216
600 Ps 0.017 0.008 0.003 0.001
Throw 52-43-36-32 43-36-30-26 41-34-28-25 30-25-21-19
Vn 800 588 450 288 238 200
800 Ps 0.018 0.008 0.005 0.002 0.001 0.001
Throw 57-48-40-35 51-43-36-31 47-39-32-29 40-34-28-24 35-29-24-21 33-27-23-20
Vn 735 563 360 298 250
1000 Ps 0.014 0.009 0.003 0.002 0.001
Throw 63-52-43-38 57-48-40-35 49-41-34-30 40-34-28-25 38-32-26-23
Vn 882 675 432 357 300
5200
1200 Ps 0.019 0.012 0.004 0.002 0.001
Throw 70-58-48-42 64-53-44-39 55-46-38-33 46-38-32-28 43-36-30-26
Vn 787 504 417 350
1400 Ps 0.014 0.005 0.003 0.002
Throw 63-52-43-38 60-50-41-36 51-43-35-31 48-40-33-29
Vn 900 576 476 400
1600 Ps 0.02 0.006 0.005 0.003
Throw 76-63-52-46 65-54-45-40 61-51-42-37 57-48-40-35
Vn 648 536 450
1800 Ps 0.006 0.011 0.006
Throw 65-54-45-40 78-65-54-48 76-61-51-45
Vn 720 595 500
2000 Ps 0.007 0.008 0.004
Throw 70-58-48-42 70-58-48-42 66-55-45-40
Vn 792 655 550
2200 Ps 0.014 0.009 0.005
Throw 79-66-55-48 47-62-51-45 70-58-48-42

DEFINITION OF UNITS
DIFFUSERS

CEILING

Throw Cataloged Throw is horizontal dstances in feet to the terminal velocities of 150,100 and 50fpm
with supply air temp 20 F below room air temp
Vn Neck Velocity
5200
MODEL 9000
Model 9000 is designed to supply large volumes of air at low sound
levels and pressure drop. Field adjustment of the air pattern is fast
and easy by repositioning the louvered modular pattern controllers to
*AIRE
METAL
DIFFUSERS
suit the desired application.
Tag: METAL*AIR
CEILING
Series Tag:
9000
: construction
All aluminum
Submittal
Series :No: 9000 9000 Submittal No: 9000
Modular cores can be adjusted to obtain 1-way, 2-way opposite, 2-way corner, 3-way or
Square / Rectangular Modular Core Diffusers
4-way airAluminum
Extruded patterns - 1, 2 , 3 or 4 Cores
Tag:/ Rectangular Modular Core Diffusers
Square
Tag: Aluminum - 1, 2, 3 or 4 Cores
Extruded
**AIRE
METAL
METAL AIR
Series : 9000 Submittal No: 9000

Models: 9000-1
Cores are easily Surface
removable Mount
with Series
spring load latches no toolsModels:
required :
9000-7 Concealed T-Bar 9000 Submittal No: 9000
9000-2 Beveled Surface Mount 9000-8 Square / RectangularTegular Modular T-BarCore Diffusers
9000-6 Lay in T-Bar Square
Extruded/ 9000-9
Rectangular
Aluminum 24 - Modular
1,x 2,
24 3 or Core
Donn 4(USG)
Cores Diffusers
Ceiling Grid
9000-6P Lay in T-Bar Panel ExtrudedOBD
Options: Aluminum Steel - 1, 2, 3 or 4Blade
Opposed Cores Damper
Models: 9000-7 Concealed T-Bar
Models: 9000-7
9000-8 Concealed
Tegular T-Bar T-Bar
Model 9000-1 ( Surface Mount ) Model 9000-7
9000-8
9000-9 Tegular
( Concealed T-Bar
24 x 24 T-Bar(USG) Ceiling Grid
) Donn

1
Ceiling Opening = Listed Size + 1 2 Options: 9000-9
OBD Steel
24 x 24
Spring Loaded Opposed
Donn Blade= Listed
(USG)
Duct Opening Damper
Ceiling
Size Grid
Core Latch 1
Duct Size = Listed Size OBDA
Options: OBD Aluminum
Steel
(2 Per Core) Opposed
Opposed
Neck Blade
Size Blade
Size -Damper
Damper
= Listed
4 Side Splines (2) Optional
1 Note For 9000-7 Model:
Spring Loaded Neck Size = Listed Size - 4 OBDA Aluminum
Model 9000-7 ( Concealed T-Bar )
1 Opposed Blade Damper Diffuser Listed Neck Sizes - In even multip
Core Latch 4 Turn Latch Locks
On Concealed T-Bar core sizes. Minimum square listed neck si
(2 Per Core) Model 9000-7 2( Concealed T-Bar )
3 Spring Loaded Duct Opening = Listed Size Kerf (2)
Low Limit Maximum square listed neck size is 36 x 3
4 Core Latch 1
Neck
Duct Size = Listed Size -Size4 of Duct 2 Minimum rectangular listed sizes 8 x 4.
Low Limit 1 Spring Loaded
(2 Per Core) Opening = Listed Side Splines (2) Optional
3 22 Core Latch 1 Note For 9000-7
Maximum Model: listed neck size is 3
rectangular
of Duct 1 4 1 Neck Size = Listed Size - 4 PanelSide Splines (2) Optional Diffuser Listeddiffuser
Neck Sizes
1 (2 Per Core)
Removable
4 Turn Latch Locks Modular Core Lay-In Filler Maximum listed- Inneckeven multiples
size must be o
4 1 Note
core least For
sizes. 9000-7
6" Minimum
less thanModel:
square listed neck size is
T-Bar module.
On Concealed T-Bar Overall Diffuser = T-Bar Spacing -
23 1 Kerf
16 (2)
Low Limit Diffuser
Maximum Listed
square Neck Sizessize
listed neck - In is
even
36 xmultipl
36.
4 4 Turn Latch Locks
of Duct 2 core sizes.
Minimum Minimum
rectangular square
listed sizeslisted
8 x 4.neck siz
Removable Modular Core 3 On Concealed T-Bar Kerf (2)
Frame Model 9000-82 (4 Tegular T-Bar )
Ceiling Line Low Limit Maximum
Maximum square listed
rectangular listednecknecksizesizeisis36
36xx362
Overall = Listed Size +5 (127) Removable Modular CoreSpacingLay-In
T-Bar = 24 xFiller
24 Panel of Duct 2 Minimum
Maximum rectangular
diffuser listedsize
listed neck sizes 8 xbe
must 4. at
1 Maximum
least 6" less thanrectangular
T-Bar module. listed neck size is 36
Overall Diffuser = T-Bar Spacing - 1
Removable Overall
Modular Diffuser
Core = T-BarLay-In
Spacing 16
- Panel
Filler Maximum diffuser listed neck size must be
4
1 least 6" less than T-Bar module.
Model 9000-2 ( Beveled Surface Mount ) Note For (9000-1
Model 9000-8 and 9000-2
Tegular T-BarModels:
) Overall Duct Opening
Diffuser = T-Bar = Listed
Spacing Size-
16
Ceiling Opening = Listed Size + 41 Diffuser Listed Neck Sizes - In even multiplesNeck of Size = Listed Size - 1
T-Bar Spacing = 24 x 24 4
core sizes.Minimum square
Model 9000-8 ( Tegular T-Bar ) Spring listed neck size is 4 x 4.
Duct Opening = Listed Size Maximum square listed neck sizeLoaded is 36 x 36.Diffuser = T-Bar Spacing - 1
Spring Loaded Overall
1 T-Bar Spacing = 24 x 24 4
Core Latch Neck Size = Listed Size - 4 Minimum rectangular listed sizes Core8 Latch
x 4. Duct Opening = Listed Size
Maximum rectangular listed neck size Overall Diffuser = T-Bar Spacing - 1 41
is 36 x 24. Low Limit 2 3
(2 Per Core) Neck Size = Listed Size - 4
4 of Duct 2
Spring Duct Opening = Listed Size
Loaded 1
Neck Size = Listed Size -
Removable Modular Core
Low Limit 2 3 Lay-In Filler Panel Frame
Core Latch
Spring
4
4 Low Limit 2 3
22 7
of Duct = 2 7
Loaded 8 x 22 8 Overall Face of Duct 2 4
Core Latch Note For 9000-8 and 9000-9 Models:
Low Limit 2 3 Diffuser listed neck sizes even multiples o
Number 9000
Model 9000-9 ( 24 x 24 Donn Ceiling Grid ) Removable Modular Core 4
3 Lay-In Filler Panel Frame of Duct 2 sizes square or rectangular at least below
Removable Modular Core Frame
4 T-Bar
22 Spacing
7 x 22 = 24Face
7 Overall x 24 Model 9000-8 maximum diffuser listed size
Overall = Listed Size + 4 21 Ceiling Line 8 8 Removable
Lay-In FillerDuctPanelOpening
Frame= Listed Size Modular Core NotebeForat least
9000-8 6" and
less 9000-9
than T-Bar Module.
Models:
Model 9000-9 ( 24 x 24 Donn Ceiling Grid ) x 22= 7Listed 1
22 7
Neck Size Size
Overall Face-
4
Diffuser listed neck sizes even multiples of core
Spring 8 8 sizes square or4rectangular
x4 6atx least
18 below 10 table
x 15
Model 9000-6 ( Lay in T-Bar ) Loaded T-Bar Spacing = 24 x 24 Note For 9000-8 and 9000-9 Models:
Model 9000-8 maximum 4 x 8 sizes diffuser
7 x 7 listed size
11 xmu11
9000
1 Model 9000-9 ( 24 x 24 Donn Core Ceiling
Latch Grid
Duct )
Opening = Listed Size beDiffuser
at least 6"listed
lessneck
than T-Bareven Module.multiples of
Overall Diffuser = T-Bar Spacing - 4 3 sizes square4 or x 12rectangular 7 x 14at least 12below
x 12t
Note For 9000-6 Model: T-Bar
Neck SizeSpacing 24 x-24 1
= Listed=Size 24
Model 9000-8 maximum diffuser listed size
Spring 4 5 x 5 8 x 8 12 x 16
Duct Opening = Listed Size Diffuser Listed Neck Sizes - InLoaded
even multiplesDuctofOpening = Listed Size be at least 4 x6" 4 less than 6 x 18 10 x 15
T-Bar Module.
1 core sizes. Neck Dimensions 4 x 58 x 10 7 x 78 x 16 11 x 14 11 x 14
Spring Neck Size = Listed Size - 4 Coremust
Latchbe 8 x Neck
8, 20 x 8
Size = Listed Size -
1
or 20 x 20 and 4 inches less than T-Bar
Lay-In
Spring gridPanel
Filler size. Frame Removable 4 Modular Core 3 4x4 5 x 15 7 x 149 x 9 12 x 15
12 12xx1515
Loaded 24 x4 6 x 18 10
For other neck sizes, use model 9000-6P.
Loaded 5 x456xx86 8 x 789xx 718 12 x11 16
16xx1116
Core Latch
Submittal
Core Latch
(2 Per Core) Options: OBD Steel Opposed Blade Damper 3 5 x4106 x 12 8 x 10
x 12 16 x 10 14 x 18
7 x 14 14 x 18
12 x 12
24
OBDA Aluminum Lay-InOpposed Blade Damper
Filler Panel Frame Removable Modular Core 5x5 15x 5 9 x 89 x 8 15 x12 15x 16
1 6x6
Specified Duct Size - 4 5 x 10 9 x 818x 16 16 x14
16
x 14
OBD
6 xor12
OBDA10
Damper
Options: OBD Steel Opposed Blade
Lay-In Filler Damper
Panel Frame 1 1Removable1Modular
1 Core Blade 5 x 15
x 10
9x9
18 x 18
15 x 15
2 2
OBDA
Neck Sizes Available Aluminum
For Models: Opposed
9000-6 and Blade
9000-6D (with Damper
Damper)
6x6 9 x 18 16 x 16
Removable Modular Core Frame Ceiling Line 1
Options:
T-Bar OBD
ListedSteel Opposed Blade Damper
No. Specified Duct Size - 4 6 x 12 10 x 10
OBD or OBDA Damper
18 x 18
Overall Diffuser 1 1
Spacing Neck
OBDA SizeAluminum Opposed Blade
Cores Damper
1
2 1 Blade
2
Model 9000-6P ( Lay in T-Bar Panel ) 4 1 11
12 x 12 11 3/4 x 11 3/4
T-Bar Spacing Listed Neck Size
1
Overall Diffuser = T-Bar Spacing - 4 Overall8 Diffuser
x 8
No. Cores
Damper Operator 1
10Slot) 1 2 11
Specified Duct Size - 4 4
2 1
OBD or OBDA Damper
2
24 x 12 20 x 8 23 3/4 x 23 3/4(Screwdriver Blade
2
Duct Opening = Listed Size
Neck Size = Listed Size - 41 12 x 12 8x8 11 3/420xx11
24 x 24 20 3/4 23 3/4 x 23 3/4
4 4 1
14
Spring Loaded Damper Operator 2 1
(Screwdriver Slot) 2
Core Latch
(2 Per Core) 24 x 12 20 x 83 23 3/4 x 23 3/4
Note For 9000-6P Model:
10
Diffuser Listed Neck Sizes - In even multiples of core sizes.
Overall = Listed Size + 5 11
4
24 Notes: ( check if provided) Damper Operator
Minimum square listed neck sizes 4 x 4. Maximum square 2 1
Low Limit 2
24 x 24 20 x 20
of Duct 2 23 3/4 x 23 3/4
1.8 xAvailable Finishes
(Screwdriver
listed neck size is 36 x 36. Minimum Rectangular 4
4. Maximum rectangular listed neck size is 36 x 24.
Slot)
listed size is
2. AvailableOverall
Accessories
= Listed Size + 5 3. Construction Details
Lay-In
Notes:
Listed ( check
neck
Standard size must
Finish: ifbe
01 provided)
at least 4" less than T-Bar module.
White ( Shipped Unattached ) Sizes are only as listed.
Removable Modular Core Frame Filler Panel Ceiling Line
1. Optional
AvailableFinish (no extra charge):
Finishes OBD Steel Opposed
2. Available Blade Damper.
Accessories
Overall = Listed Size + 5 3. Construction Details
Notes:
Filed Adjustable Air Deflection Patterns 02 Aluminum
( check paint.
if White
provided) OBDA Aluminum Opposed Blade Damper.
Standard Finish: 01 ( Shipped Unattached ) Sizes are only as listed.
Obtained By Removing and Rearranging Modular Cores inOptional
Frames. Finishes ( additional charge ): L9 Rectangular Equalizing Grid.
Optional Finish (no extra charge): OBD Steel Opposed Blade Damper.
1. Available
03 Black. Finishes 2. Available Accessories
TR DEEP Square to Round Transition. 3. Construction Details
02 Aluminum paint. OBDA Aluminum Opposed Blade Damper.
Standard
28 CustomFinish: 01 White
Color. ( Shipped Unattached ) Sizes are only as listed.
Optional Finishes ( additional charge ): L9 Rectangular Equalizing Grid.
Optional
03 Black.Finish (no extra charge): OBD
TR Steel
DEEP Opposed
Square BladeTransition.
to Round Damper.
02 Aluminum paint.
28 Custom Color. OBDA Aluminum Opposed Blade Damper.
Submittal No. 9000
Optional Finishes ( additional charge ):
Date: 03/08/2005
L9 Rectangular Equalizing Grid.
Dimensions are in inches Page:
03 Black. TR DEEP Square to Round Transition.
1 - Way 2 - Way Corner 2 - Way Opposite 3 Submittal
28 CustomNo.
- Way Color.9000
4 - Way Date: 03/08/2005 Dimensions are in inches Page: 2
Notes: ( check if provided) Submittal No. 9000 Date: 03/08/2005 Dimensions are in inches Page:
Submittal No. 9000 Date: 09/01/2003 Dimensions are in inches Page: 1 of 2

Air Diffusers shall be model: Accessories

9000-1 Surface Mounted OPTIONAL DAMPERS
9000-2 Beveled
Aluminum opposed blade dampers shall be provided.
9000-6 T-bar Lay-in
DIFFUSERS
Damper shall be adjusted using a handle accessible

CEILING
9000-7 Concealed Spline through the face of the diffuser.

9000-8 Tegular Lay-in Screwdriver slot operators are not allowed.
9000-9 Donn Fineline Lay-in
Air Diffusers shall be model 9000 manufactured by Performance Specification
METALAIRE. Units shall consist of an adjustable set of The manufacturer shall provide published performance
modular core pattern controllers that are removable from data. Data shall be tested in accordance to ANSI/
the face of the diffuser without the use of tools. Diffusers ASHRAE Standard 70-2006.
shall be extruded aluminum construction. Steel border or
cores are not acceptable. Paint Specification

Diffusers shall field adjustable to obtain 1, 2-way cleaner and a de-ionized water rinse.
opposite, 2-way corner, 3, and 4-way directional air
patterns. Units shall be designed to integrate into the
specified ceiling system.
9000
MODULAR CORE CEILING DIFFUSER
Neck
1 Core
Model 6 8 10
DIFFUSERS
9000-1 Surface Mount 6 X
CEILING
9000-2 Beveled Drop Surface Mount 8 X
10 X
4 Core
6 8 10 12 14 16 18 20 22 24
6 X
8 X
10 X

12 X
14 X
16 X
18 X
20 X
22 X
24 X
Available Accessories Available Finishes

OBD Steel Opposed Blade Damper Standard
OBDA Aluminum Opposed Blade Damper 01 White
L9 Square / Rectangular Equalizing Grid Optional
TR Deep Deep Square to Round Transition 02 Satin Silver
9000
03 Black
24 Mill
28 Custom Color

MODULAR CORE CEILING DIFFUSER
Neck
Model Module 6 8 10 12 14 16 18 20
12 x 12 8 X
DIFFUSERS
6 X
CEILING
8 X
10 X
9000-6 T-bar Lay-in 12 X
24 x 24
14 X
16 X
18 X
20 X
6 X
8 X
9000-7 10 X
Concealed Spline
9000-8 Tegular 24 x 24 12 X
Donn Fineline
9000-9 14 X
16 X
18 X
Available Accessories Available Finishes

OBD Steel Opposed Blade Damper Standard
OBDA Aluminum Opposed Blade Damper 01 White
L9 Square / Rectangular Equalizing Grid Optional
TR Deep Deep Square to Round Transition 02 Satin Silver
9000
03 Black
24 Mill
28 Custom Color
MODEL 9000 (SINGLE CORE)
Neck Vel 200 300 400 500 600 700 800
Outlet Vel 450 675 900 1125 1350 1575 1800
Single
Core Size Pt 0.013 0.028 0.50 0.079 0.114 0.155 0.202
DIFFUSERS
CFM 13 19 25 32 38 44 50
CEILING
3x3 Throw 2-3 3-4 4-5 4-6 5-7 6-8 6-9
NC <20 <20 <20 <20 20 25 27
CFM 22 33 44 56 67 78 89
4x4 Throw 3-4 4-5 5-7 6-8 6-9 7-10 8-11
NC <20 <20 <20 <20 22 27 31
CFM 35 52 70 87 104 122 139
5x5 Throw 4-5 5-7 6-9 7-10 8-12 9-13 10-14

NC <20 <20 <20 <20 22 27 31
CFM 50 75 100 125 150 175 200
6x6 Throw 4-6 6-8 7-10 8-12 9-14 10-15 11-16
NC <20 <20 <20 <20 25 30 34
CFM 68 102 136 170 204 238 272
7x7 Throw 5-7 7-10 8-12 10-14 11-17 12-18 13-19
NC <20 <20 <20 21 27 32 35
CFM 89 133 178 222 267 311 355
8x8 Throw 5-8 8-11 9-14 11-16 12-19 13-20 15-22
NC <20 <20 <20 22 27 32 36
CFM 112 169 225 281 337 393 459
9x9 Throw 6-9 9-12 10-15 12-18 13-21 15-23 16-24
9000
NC <20 <20 <20 23 28 33 37
CFM 139 208 278 347 416 486 555
10 x 10 Throw 7-10 10-13 12-16 13-20 15-23 16-24 18-26
NC <20 <20 <20 24 29 34 38

MODEL 9000 (4 CORE)
Neck Vel 200 300 400 500 600 700
Outlet Vel 450 675 900 1125 1350 1575
Listed Pt .013 .028 .05 .079 .114 .155

Size Side A B A B A B A B A B A B
DIFFUSERS
CEILING
CFM 50 75 100 125 150 175

0.25 <20 <20 <20 20 26 31
4-Way Throw 2-3 3-4 4-5 4-6 5-7 6-8
6x6
3-Way Throw 2-3 3-4 3-4 4-6 4-5 6-7 4-6 6-8 5-7 7-10 6-8 8-11
2-Way Throw 3-4 4-6 6-7 6-8 7-10 8-11
1-Way Throw 4-6 6-8 8-10 8-12 10-14 12-16
CFM 90 130 175 220 265 310
0.44 <20 <20 <20 23 28 33
4-Way Throw 3-4 4-5 5-7 6-8 6-9 7-10

8x8
3-Way Throw 3-4 4-6 4-5 6-7 5-7 7-10 6-8 8-11 6-9 8-13 7-10 10-14
2-Way Throw 4-6 6-7 7-10 8-11 8-13 10-14
1-Way Throw 6-8 8-10 10-14 12-16 12-18 14-20
CFM 140 205 275 345 415 485
0.69 <20 <20 <20 23 28 33
4-Way Throw 4-5 5-7 6-9 7-10 8-12 9-13
10 x 10
3-Way Throw 4-5 6-7 5-7 7-10 6-9 8-13 7-10 10-14 8-12 11-17 9-13 13-18
2-Way Throw 6-7 7-10 8-13 10-14 11-17 13-18
1-Way Throw 8-10 10-14 12-18 14-20 16-24 18-26
CFM 200 300 400 500 600 700
1.0 <20 <20 <20 25 31 36
9000
4-Way Throw 4-6 6-8 7-10 8-12 9-14 10-15

12 x 12
3-Way Throw 4-6 6-8 6-8 8-11 7-10 10-14 8-12 11-17 9-14 13-20 10-15 14-21
2-Way Throw 6-8 8-11 10-14 11-17 13-20 14-21
1-Way Throw 8-12 12-16 14-20 16-24 18-28 20-30
CFM 270 405 545 680 815 950
1.36 <20 <20 21 27 33 38
4-Way Throw 5-7 7-10 8-12 10-14 11-17 12-18
14 x 14
3-Way Throw 5-7 7-10 7-10 10-14 8-12 11-17 10-14 14-20 11-17 16-24 12-18 17-25
2-Way Throw 7-10 10-14 11-17 14-20 16-24 17-25
1-Way Throw 10-14 14-20 16-24 20-28 22-34 24-36
CFM 355 530 710 885 1070 1245
1.78 <20 <20 21 28 33 38
4-Way Throw 5-8 8-11 9-14 11-16 12-19 13-20
16 x 16
3-Way Throw 5-8 7-11 8-11 11-16 9-14 13-20 11-16 16-22 12-19 17-27 13-20 18-28
2-Way Throw 7-11 11-16 13-20 16-22 17-27 18-28
1-Way Throw 10-16 16-22 18-28 22-32 24-38 26-40
MODEL 9000 (4 CORE)
Neck Vel 200 300 400 500 600 700
Outlet Vel 450 675 900 1125 1350 1575
Listed Pt .013 .028 .05 .079 .114 .155

Size Side A B A B A B A B A B A B
DIFFUSERS
CEILING
CFM 450 670 900 1120 1345 1570
2.25 <20 <20 22 29 34 39
4-Way Throw 6-9 9-12 10-15 12-18 13-21 15-23
18 x 18
3-Way Throw 6-9 8-13 9-12 13-17 10-15 14-21 12-18 17-25 13-21 18-30 15-23 21-32
2-Way Throw 8-13 13-17 14-21 17-25 18-30 21-32
1-Way Throw 12-18 18-24 20-30 24-36 26-42 30-46
CFM 555 830 1110 1390 1670 1945
2.78 <20 <20 23 30 35 40

4-Way Throw 7-10 10-13 12-16 13-20 15-23 16-24
20 x 20
3-Way Throw 7-10 10-14 10-13 14-18 12-16 17-22 13-20 18-28 15-23 21-32 16-24 22-34
2-Way Throw 10-14 14-18 17-22 18-28 21-32 22-34
1-Way Throw 14-20 20-26 24-32 26-40 30-46 32-48
CFM 670 1010 1345 1680 2015 2350
NC <20 <20 23 31 36 41
4-Way Throw 7-11 11-15 13-18 15-22 16-25 18-27
22 x 22
3-Way Throw 7-11 10-16 11-15 16-21 13-18 18-25 15-22 21-31 16-25 22-35 18-27 25-38
2-Way Throw 10-16 16-21 18-25 21-31 22-35 25-38
1-Way Throw 14-22 22-30 26-36 30-44 32-50 36-54
CFM 800 1200 1600 2000 2400 2800
NC <20 <20 26 32 38 42
9000
4-Way Throw 8-12 12-16 14-20 16-24 18-28 20-30
24 x 24
3-Way Throw 8-12 11-17 16-16 17-22 14-20 20-28 16-24 22-34 18-28 25-39 20-30 28-42
2-Way Throw 11-17 17-22 20-28 22-34 25-39 28-42
1-Way Throw 16-24 24-32 28-40 32-48 36-56 40-60

DEFINITION OF UNITS
CFM Cubic Feet per Minute
Throw Horizontal distances in feet to the terminal vel of 150 and 100fpm with supply air temp 20F below room air temp

CONCENTRIC SUPPLY /
RETURN CEILING DIFFUSER
DIFFUSERS
CEILING
CONCENTRIC SUPPLY /
Model DAF-CC5 Supply/Return Ceiling diffusers provide a functional solution

to Roof-Top package single outlet air distribution requirements. The louver
faced high induction design ensures a true horizontal air pattern for excellent
mixing of room and primary air.
PAGE 91
DAF-CC5
The cube core return provides an integrated air return path which minimizes
pressure drop and resultant noise levels.
MODEL DAF-CC5
Model DAF-CC5 is a combination supply/return directional diffuser
with extruded aluminum louvered blades for air supply and a cube
core for return air. The DAF-CC5 is designed for high capacity
DIFFUSERS
applications such as those found in big box stores with minimal duct
CEILING
work. The diffuser is ideally suited for designs which require single
point supply and return air.
Cube core return maximizes free area and visibility into duct work
Sized to handle full range of standard Roof-Top units
Available in multiple frame styles

CONCENTRIC SUPPLY /
DAF-CC5
Frame Overall Ceiling Opening Bottom of Duct
Style Diffuser Size Dimensions To Ceiling Line
1 Supply Neck + 5 3/4 Supply Neck + 3 3/4 1 1/2
2 Supply Neck + 5 1/8 Supply Neck + 1 1 3/16
6A Supply Neck + 5 3/4 T-Bar Module Size 1 11/16
6B T-Bar Spacing -1/4 T-Bar Module Size 1 11/16
7 T-Bar Spacing -1/16 T-Bar Module Size 1 11/16
8 T-Bar Spacing -1/4 T-Bar Module Size 1 15/16

SERIES DAF-CC5 SPECIFICATIONS

DAF-CC5-1 Surface Mount The manufacturer shall provide published performance
DAF-CC5-2 Beveled Drop Face data. Data shall be tested in accordance to ANSI/
DAF-CC5-6 T-bar Lay-in
DIFFUSERS
CEILING
DAF-CC5-7 Concealed Spline

Paint Specification
DAF-CC5-8 Tegular Lay-in Process shall be anodic electro-deposition using an
Combination concentric supply/return units shall be anodic acrylic paint. Units shall undergo pre-treatment
model DAF-CC5 manufactured by METALAIRE. Units including a pressurized spray stage using an alkaline
shall consist of a fixed pattern outer ring of louvers that cleaner and a de-ionized water rinse.
discharge supply air. The inner return or exhaust core
shall consist of aluminum 1/2" x 1/2" x 1/2" cubed core.
ceiling system.
CONCENTRIC SUPPLY /
DAF-CC5 MODEL NUMBER SPECIFICATION

CONCENTRIC SUPPLY/RETURN CEILING DIFFUSER
Model Supply Return Available Finishes
DAF-CC5-1 Surface Mount 12 x 12 6x6 Standard
DAF-CC5-2 Beveled Drop Surface Mount Thru Thru 01 White
60 x 60 45 x 45 Optional
02 Satin Silver
03 Black
24 Mill
DAF-CC5
28 Custom Color
DAF-CC5 MODEL NUMBER SPECIFICATION
CONCENTRIC SUPPLY/RETURN CEILING DIFFUSER
Model Supply Return Module Available Finishes
6x6 Standard
12 x 12
9x9 01 White
DIFFUSERS
6x6 Optional
CEILING
15 x 15 9x9 02 Satin Silver
24 x 24
12 x 12 or 03 Black
48 x 24
6x6 24 Mill
9x9 28 Custom Color
18 x 18
12 x 12
15 x 15
6x6

9x9
CONCENTRIC SUPPLY /
DAF-CC5-6 T-bar Lay-in 21 x 21 12 x 12 24 x 24 Only
15 x 15
18 x 18
24 x 24
18 x 18
27 x 27
30 x 30
21 x 21
33 x 33
36 x 36 24 x 24 48 x 48 Only
39 x 39 27 x 27
27 x 27
42 x 42 30 x 30
DAF-CC5
33 x 33
12 x 12 9x9
15 x 15 9x9
DAF-CC5-7
Concealed Spline Tegular 12 x 12 24" x 24" Only
DAF-CC5-8 18 x 18
15 x 15
21 x 21 15 x 15

SERIES DAF-CC5 PERFORMANCE DATA/4-WAY SQUARE PATTERN (S4)
MODEL DAF CC5
Based on 100% Return of Supply Air for 2-10 Ton Roof Top Packages
Tonage 2 2.5 3 4 5 7.5 10
Capacity (CFM) 800 1000 1200 1600 2000 3000 4000
DIFFUSERS
Supply Neck Size 21 x 21 21 x 21 24 x 24 27 x 27 30 x 30 39 x 39 45 x 45

CEILING
Vk 1335 1665 1715 1430 1575 1365 1540

Ps 0.09 .15 .15 .11 .13 .10 .12
Pt .11 .18 .18 .13 .15 .12 .15
Throw 7-14 8-16 9-17 10-20 12-23 16-31 21-39
Return Neck Size 15 x 15 15 x 15 18 x 18 18 x 18 21 x 21 27 x 27 33 x 33
Inlet Velocity 513 640 535 710 654 590 529
Pt .04 .06 .04 .07 .06 .05 .04
NC 25 35 37 30 37 37 38
CONCENTRIC SUPPLY /
SERIES DAF-CC5 PERFORMANCE DATA/4-WAY RECTANGULAR PATTERN (R4)

Based on 100% Return of Supply Air for 2-10 Ton Roof Top Packages
Tonage 2 2.5 3 4 5 7.5 10
Capacity (CFM) 800 1000 1200 1600 2000 3000 4000
Supply Neck Size 24 x 18 27 x 18 27 x 21 36 x 21 36 x 27 45 x 36 54 x 36
Vk 1335 1540 1715 1335 1480 1300 1540
Ps .09 .12 .15 .09 .12 .09 .12
DAF-CC5
Pt .11 .15 .18 .11 .14 .11 .15

Throw Side A 6-11 7-12 8-13 10-15 12-14 15-22 16-24
Throw Side B 8-14 11-15 10-16 12-18 14-21 17-25 19-31
Return Neck Size 18 x 12 21 x 12 21 x 15 27 x 12 27 x 18 33 x 24 42 x 24
Inlet Velocity 533 570 550 710 590 545 570
Pt .04 .05 .04 .07 .05 .04 .05
NC 25 35 37 30 37 32 38
MODEL DAF CC5
Based on 75% Return of Supply Air
Neck Velocity
200 300 400 500 600 700 800
DIFFUSERS
Face Velocity 500 750 1000 1250 1500 1750 2000
CEILING
Ps .013 .03 .05 .08 .12 .16 .21
All
Supplies Pt .016 .04 .06 .10 .14 .19 .25
Total CFM 90 130 175 220 265 310 350
12 x 12
Throw Side A 2-4 3-5 5-8 6-10 6-12 7-13 8-14
Supply
Throw Side B
Total CFM 70 100 130 165 200 230 260
9x9 Inlet Velocity 125 180 230 295 355 410 465

Return Ps .010 .010 .010 .010 .020 .030 .040
CONCENTRIC SUPPLY /
NC - - 21 26 31 35 39
Total CFM 200 300 400 500 600 700 800
15 x 15
Throw Side A 3-5 5-8 6-10 6-12 7-14 8-17 10-19
Supply
Throw Side B
Total CFM 150 225 300 375 450 525 600
9x9 Inlet Velocity 265 400 535 670 805 935 1070
Return Ps .010 .020 .040 .060 .090 .120 .160
NC - - 21 26 35 40 45
Total CFM 250 375 500 625 750 875 1000
18 x 18
Throw Side A 3-5 4-8 6-11 6-12 8-14 9-16 10-19
Supply
Throw Side B
Total CFM 190 280 375 470 560 655 750
DAF-CC5
12 x 12 Inlet Velocity 190 280 375 470 560 655 750
Return Ps .010 .010 .020 .030 .040 .060 .080
NC - - 24 29 34 38 42
Total CFM 140 210 280 350 420 490 560
18 x 18
Throw Side A 4-6 5-8 6-12 7-13 8-15 9-17 11-20
Supply
Throw Side B
Total CFM 105 155 210 260 315 365 420
15 x 15 Inlet Velocity 70 100 135 165 200 235 270

Return Ps .010 .020 .030 .050 .070 .090 .010
NC - - 20 25 30 35 40
Total CFM 300 450 600 750 900 1050 1200
21 x 21
Throw Side A 3-5 4-8 5-12 7-13 8-15 9-17 11-20
Supply
Throw Side B
Total CFM 225 340 450 560 675 790 900
15 x 15 Inlet Velocity 145 220 290 360 430 505 575

Return Ps .010 .010 .010 .020 .030 .010 .050
NC - - 25 30 35 39 43

MODEL DAF CC5
Neck Velocity
200 300 400 500 600 700 800
DIFFUSERS
Face Velocity 500 750 1000 1250 1500 1750 2000

CEILING
Ps .013 .03 .05 .08 .12 .16 .21

All
Supplies Pt .016 .04 .06 .10 .14 .19 .25
24 x 24 Total CFM 350 525 700 875 1050 1225 1400

Supply Throw 3-5 4-8 5-11 6-13 8-16 10-20 13-25
Total CFM 260 395 525 655 790 920 1050
18 x 18 Inlet Velocity 115 175 235 290 350 410 465

Return Ps .010 .010 .010 .010 .020 .030 .040
NC - - 26 31 36 40 43
CONCENTRIC SUPPLY /
27 x 27 Total CFM 560 845 1125 1405 1685 1965 2250

Supply Throw 3-5 5-10 7-15 8-17 10-20 12-24 14-28
Total CFM 405 610 815 1015 1220 1425 1630
18 x 18 Inlet Velocity 180 270 360 450 540 635 725

Return Ps .010 .010 .020 .030 .040 .060 .070
NC - - 26 32 37 41 44
30 x 30 Total CFM 640 955 1275 1595 1915 2235 2550

Supply Throw 3-7 5-12 7-16 9-17 11-21 13-25 15-30
Total CFM 480 715 955 1195 1435 1675 1910
21 x 21 Inlet Velocity 155 235 310 390 470 545 625

Return Ps .010 .010 .010 .020 .030 .040 .050
NC - 20 27 33 38 42 45
DAF-CC5
33 x 33 Total CFM 900 1350 1800 2250 2700 3150 3600

Supply Throw 4-8 6-13 8-17 11-23 15-30 17-33 19-38
Total CFM 675 1010 1350 1690 2025 2360 2700
21 x 21 Inlet Velocity 220 330 440 550 660 770 880

Return Ps .010 .020 .030 .040 .060 .080 .100
NC - 20 28 34 39 43 46
MODEL DAF CC5
Neck Velocity
200 300 400 500 600 700 800
DIFFUSERS
Face Velocity 500 750 1000 1250 1500 1750 2000
CEILING
Ps .013 .03 .05 .08 .12 .16 .21
All
Supplies Pt .016 .04 .06 .10 .14 .19 .25
36 x 36 Total CFM 1000 1500 2000 2500 3000 3500 4000

Supply Throw 4-8 5-13 8-18 12-22 15-30 17-34 21-38
Total CFM 750 1125 1500 1875 2250 2625 3000
24 x 24 Inlet Velocity 185 280 375 470 560 655 750

Return Ps .010 .010 .020 .030 .050 .060 .080

NC - 20 28 34 39 43 47
CONCENTRIC SUPPLY /
39 x 39 Total CFM 1100 1650 2200 2750 3300 3850 4400
Supply Throw 5-10 8-17 11-21 15-23 18-34 25-39 26-42
Total CFM 825 1240 1650 2060 2475 2890 3300
27 x 27 Inlet Velocity 165 245 325 410 490 570 650

Return Ps .010 .010 .015 .020 .030 .050 .060
NC - 20 29 35 40 44 47
42 x 42 Total CFM 1440 2160 2875 3595 4315 5035 5750

Supply Throw 4-10 10-21 14-28 18-34 21-39 25-43 28-49
Total CFM 1080 1615 2160 2695 3235 3775 4310
27 x 27 Inlet Velocity 215 320 425 530 640 745 850

Return Ps .010 .010 .030 .040 .060 .080 .100
NC - 23 30 36 41 45 48
DAF-CC5
42 x 42 Total CFM 1200 1800 2400 3000 3600 4200 4800
Supply Throw 4-10 8-17 11-21 15-24 18-33 24-38 25-44
Total CFM 900 1350 1800 2250 2700 3150 3600
30 x 30 Inlet Velocity 145 215 290 360 430 505 575

Return Ps .010 .010 .010 .020 .030 .040 .050
NC - - 25 33 35 40 45
42 x 42 Total CFM 940 1410 1880 2345 2815 3285 3750

Supply Throw 4-9 6-13 8-18 12-21 15-29 16-33 20-37
Total CFM 705 1055 1410 1760 2110 2460 2815
33 x 33 Inlet Velocity 95 140 185 230 280 325 370

Return Ps .020 .030 .050 .090 .130 .170 .220
NC - 20 25 33 35 40 45
45 x 45 Total CFM 1300 1950 2600 3250 3900 4550 5200

Supply Throw 5-10 9-20 13-24 17-28 20-38 27-45 24-50

MODEL DAF CC5
Neck Velocity
200 300 400 500 600 700 800
DIFFUSERS
Face Velocity 500 750 1000 1250 1500 1750 2000

CEILING
Ps .013 .03 .05 .08 .12 .16 .21

All
Supplies Pt .016 .04 .06 .10 .14 .19 .25
Total CFM 975 1460 1950 2440 2925 3410 3900
33 x 33 Inlet Velocity 130 195 255 320 390 450 515

Return Ps .030 .060 .100 .150 .200 .300 .400
NC - 22 28 33 39 44 48
48 x 48 Total CFM 1690 2530 3380 4220 5065 5910 6750

Supply Throw 6-11 11-23 16-24 20-30 23-41 30-48 35-55

CONCENTRIC SUPPLY /
Total CFM 1265 1900 2530 3165 3800 4430 5065
33 x 33 Inlet Velocity 170 250 335 420 500 585 670

Return Ps .010 .010 .020 .030 .040 .050 .060
NC - 23 32 37 41 45 49
60 x 60 Total CFM 2190 3280 4375 5470 6565 7660 8750

Supply Throw 7-13 13-25 18-28 22-32 25-43 32-50 37-56
Total CFM 1640 2460 3280 4100 4925 5745 6565
45 x 45 Inlet Velocity 115 175 235 290 350 410 465

Return Ps .020 .040 .070 .100 .200 .250 .300
NC - 28 32 35 38 41 46
DAF-CC5
MODEL DAF CC5
Neck Velocity
200 300 400 500 600 700 800
DIFFUSERS
Face Velocity 500 750 1000 1250 1500 1750 2000
CEILING
Ps .013 .03 .05 .08 .12 .16 .21
All
Supplies Pt .016 .04 .06 .10 .14 .19 .25
Total CFM 640 960 1280 1600 1920 2240 2560
30 x 24
Throw Side A 5-7 7-10 9-13 11-17 13-20 16-23 18-28
Supply
Throw Side B 4-7 5-9 7-11 9-14 1-17 13-18 15-23
Total CFM 480 720 960 1200 1440 1680 1920
27 x 15 Inlet Velocity 170 255 340 430 515 600 685

Return Ps .010 .010 .020 .030 .040 .050 .070
CONCENTRIC SUPPLY /
NC 20 23 26 30 35 40 45
Total CFM 675 1015 1350 1690 2030 2365 2705
36 x 27
Throw Side A 5-8 7-10 9-13 11-17 13-20 16-24 18-28
Supply
Throw Side B 4-7 6-9 8-12 10-15 11-19 14-20 17-25
Total CFM 505 760 1010 1270 1520 1775 2030
27 x 18 Inlet Velocity 150 225 300 375 450 525 600

Return Ps .010 .010 .010 .020 .030 .040 .050
NC 20 23 26 30 35 40 45
Total CFM 715 1070 1430 1785 2140 2500 2855
36 x 30
Throw Side A 5-9 7-11 9-13 11-17 13-20 16-23 18-28
Supply
Throw Side B 4-7 6-9 8-12 10-15 12-18 15-21 17-25
Total CFM 535 800 1070 1340 1605 1875 2140
DAF-CC5
27 x 21 Inlet Velocity 135 205 270 340 410 480 545
Return Ps .010 .010 .010 .020 .025 .030 .040
NC 20 23 26 30 35 40 45
Total CFM 1050 1575 2100 2625 3150 3675 4200
42 x 33
Throw Side A 6-10 8-12 11-16 13-20 16-24 19-28 22-32
Supply
Throw Side B 4-8 6-10 9-14 12-18 14-21 17-25 19-29
Total CFM 790 1180 1575 1970 2360 2755 3150
30 x 21 Inlet Velocity 180 270 360 450 540 630 720

Return Ps .010 .010 .020 .030 .040 .060 .070
NC 20 23 26 30 35 40 45
Total CFM 750 1125 1500 1875 2250 2625 3000
48 x 21
Throw Side A 4-8 7-11 10-15 13-19 17-23 18-26 22-31
Supply
Throw Side B 3-6 6-9 7-11 9-14 11-16 13-20 15-23
Total CFM 560 845 1125 1405 1690 1970 2250
39 x 12 Inlet Velocity 170 260 345 430 520 605 690

Return Ps .010 .010 .020 .030 .040 .050 .070
NC 20 23 26 30 35 40 45

MODEL DAF CC5
Neck Velocity
200 300 400 500 600 700 800
DIFFUSERS
Face Velocity 500 750 1000 1250 1500 1750 2000

CEILING
Ps .013 .03 .05 .08 .12 .16 .21

All
Supplies Pt .016 .04 .06 .10 .14 .19 .25
Total CFM 790 1180 1575 1970 2365 2760 3150
48 x 24
Throw Side A 5-8 7-11 10-15 13-19 15-23 18-27 21-31
Supply
Throw Side B 4-7 6-9 8-11 9-14 11-17 13-20 15-23
Total CFM 590 885 1180 1480 1775 2070 2360
39 x 15 Inlet Velocity 145 220 290 365 440 510 580

Return Ps .010 .010 .010 .020 .030 .040 .050

CONCENTRIC SUPPLY /
NC 20 23 26 30 35 40 45
Total CFM 825 1240 1650 2065 2480 2890 3305
48 x 27
Throw Side A 6-8 8-12 10-15 13-19 15-23 18-27 21-30
Supply
Throw Side B 5-7 7-10 8-12 10-15 13-19 14-21 17-25
Total CFM 620 930 1240 1550 1860 2170 2480
39 x 18 Inlet Velocity 130 190 255 320 380 445 510

Return Ps .010 .010 .010 .010 .020 .030 .040
NC 20 23 26 30 35 40 45
Total CFM 865 1295 1730 2160 2590 3025 3455
48 x 30
Throw Side A 5-9 7-11 10-15 13-19 15-23 18-27 21-31
Supply
Throw Side B 4-7 6-9 8-12 11-16 13-19 15-22 17-25
Total CFM 650 970 1295 1620 1940 2270 2590
DAF-CC5
39 x 21 Inlet Velocity 115 170 230 285 340 400 455

Return Ps .010 .010 .010 .010 .015 .020 .030
NC 20 23 26 30 35 40 45
Total CFM 1150 1725 2300 2875 3450 4025 4600
48 x 33
Throw Side A 7-11 9-13 11-17 15-22 18-26 21-30 23-34
Supply
Throw Side B 5-8 6-10 9-14 12-18 14-21 17-25 19-29
Total CFM 860 1295 1725 2155 2590 3020 3450
36 x 21 Inlet Velocity 165 250 330 410 495 575 655

Return Ps .010 .010 .015 .020 .030 .050 .060
NC 20 23 26 30 35 40 45
MODEL DAF CC5
Neck Velocity
200 300 400 500 600 700 800
DIFFUSERS
Face Velocity 500 750 1000 1250 1500 1750 2000
CEILING
Ps .013 .03 .05 .08 .12 .16 .21
All
Supplies Pt .016 .04 .06 .10 .14 .19 .25
Total CFM 1200 1800 2400 3000 3600 4200 4800
48 x 36
Throw Side A 7-11 9-13 11-17 15-22 18-26 21-30 23-34
Supply
Throw Side B 5-9 7-11 10-15 13-19 15-21 17-26 20-30
Total CFM 900 1350 1800 2250 2700 3150 3600
36 x 24 Inlet Velocity 150 225 300 375 450 525 600

Return Ps .010 .010 .010 .020 .030 .040 .050
CONCENTRIC SUPPLY /
NC 20 23 26 30 35 40 45
Total CFM 1250 1875 2500 3125 3750 4375 5000
48 x 39
Throw Side A 7-11 9-13 11-17 15-22 16-25 18-27 21-31
Supply
Throw Side B 5-9 7-11 10-15 11-16 13-19 15-23 18-28
Total CFM 940 1405 1875 2345 2810 3280 3750
36 x 27 Inlet Velocity 140 210 280 350 415 485 555

Return Ps .010 .010 .010 .020 .025 .030 .040
NC 20 23 26 30 35 40 45
Total CFM 1625 2440 3250 4065 4880 5690 6500
48 x 45
Throw Side A 8-13 10-15 13-19 16-24 19-29 23-33 26-38
Supply
Throw Side B 7-12 9-14 12-18 15-23 18-28 21-32 24-35
Total CFM 1220 1830 2440 3050 3660 4270 4875
DAF-CC5
33 x 30 Inlet Velocity 180 265 355 445 535 620 710
Return Ps .010 .010 .020 .030 .040 .050 .070
NC 20 23 26 30 35 40 45
Total CFM 910 1365 1820 2275 2730 3185 3640
60 x 21
Throw Side A 6-10 9-13 11-17 17-22 18-26 21-30 23-34
Supply
Throw Side B 4-7 6-9 8-11 10-15 12-18 14-20 15-23
Total CFM 680 1025 1365 1705 2050 2390 2730
51 x 12 Inlet Velocity 160 240 320 400 480 560 640

Return Ps .010 .010 .010 .020 .030 .050 .060
NC 20 23 26 30 35 40 45
Total CFM 975 1465 1950 2440 2930 3415 3900
60 x 27
Throw Side A 7-11 9-13 11-17 17-22 18-26 21-30 23-35
Supply
Throw Side B 4-7 6-9 8-12 10-15 13-19 14-20 17-25
Total CFM 730 1110 1460 1833 2200 2560 2925
51 x 18 Inlet Velocity 115 175 230 290 345 400 460

Return Ps .010 .010 .010 .010 .020 .030 .040
NC 20 23 26 30 35 40 45

MODEL DAF CC5
Neck Velocity
200 300 400 500 600 700 800
DIFFUSERS
Face Velocity 500 750 1000 1250 1500 1750 2000

CEILING
Ps .013 .03 .05 .08 .12 .16 .21

All
Supplies Pt .016 .04 .06 .10 .14 .19 .25
Total CFM 1015 1520 2030 2535 3040 3550 4055
60 x 30
Throw Side A 7-11 9-13 11-17 17-32 18-25 21-30 23-35
Supply
Throw Side B 4-7 6-9 8-12 11-16 13-19 15-23 17-25
Total CFM 760 1140 1520 1900 2280 2660 3040
51 x 21 Inlet Velocity 100 155 205 255 310 360 410

Return Ps .010 .010 .010 .010 .020 .030 .040

CONCENTRIC SUPPLY /
NC 20 23 26 30 35 40 45
Total CFM 1350 2025 2700 3375 4050 4725 5400
60 x 33
Throw Side A 8-13 10-15 13-20 17-24 18-30 22-34 26-38
Supply
Throw Side B 5-9 7-11 9-14 12-18 14-21 17-25 19-29
Total CFM 1010 1520 2025 2530 3035 3545 4050
48 x 21 Inlet Velocity 145 215 290 360 435 505 580

Return Ps .010 .010 .010 .020 .030 .040 .050
NC 20 23 26 30 35 40 45
Total CFM 1400 2100 2800 3500 4200 4900 5600
60 x 36
Throw Side A 8-13 10-15 13-20 17-25 18-30 23-34 27-40
Supply
Throw Side B 5-9 7-11 12-15 13-19 15-22 17-26 20-30
Total CFM 1050 1575 2100 2625 3150 3675 4200
DAF-CC5
48 x 24 Inlet Velocity 130 195 260 330 395 460 525

Return Ps .010 .010 .010 .020 .030 .040 .050
NC 20 23 26 30 35 40 45
Total CFM 1450 2175 2900 3625 4350 5075 5800
60 x 39
Throw Side A 8-13 10-15 14-20 17-25 18-30 23-34 27-40
Supply
Throw Side B 5-9 7-11 10-15 13-19 15-23 19-28 20-32
Total CFM 1090 1630 2175 2720 3260 3805 4350
48 x 27 Inlet Velocity 120 180 240 300 360 420 485

Return Ps .010 .010 .010 .020 .025 .030 .040
NC 20 23 26 30 35 40 45
MODEL DAF CC5
Neck Velocity
200 300 400 500 600 700 800
DIFFUSERS
Face Velocity 500 750 1000 1250 1500 1750 2000
CEILING
Ps .013 .03 .05 .08 .12 .16 .21
All
Supplies Pt .016 .04 .06 .10 .14 .19 .25
Total CFM 1810 2720 3625 4530 5435 6340 7250
60 x 42
Throw Side A 9-15 11-17 15-23 19-29 23-35 27-40 30-45
Supply
Throw Side B 7-11 9-13 11-17 15-23 19-27 22-31 24-35
Total CFM 1360 2040 2720 3400 4080 4755 5440
45 x 27 Inlet Velocity 160 240 320 405 485 565 645

Return Ps .010 .010 .010 .020 .03 .040 .060
CONCENTRIC SUPPLY /
NC 20 25 30 35 40 45 50
Total CFM 1875 2815 3750 4690 5630 6565 7500
60 x 45
Throw Side A 9-15 11-17 15-23 19-28 22-34 26-40 30-45
Supply
Throw Side B 7-12 9-14 12-18 15-23 17-27 21-32 24-36
Total CFM 1400 2110 2810 3520 4220 4925 5625
45 x 30 Inlet Velocity 150 225 300 375 450 525 600

Return Ps .010 .010 .010 .020 .030 .040 .050
NC 20 25 30 35 40 45 50
Total CFM 1940 2910 3880 4850 5820 6790 7760
60 x 48
Throw Side A 9-15 11-17 15-23 19-29 22-35 27-41 31-46
Supply
Throw Side B 7-12 9-14 13-19 16-24 18-29 23-34 25-39
Total CFM 1455 2180 2910 3640 4365 5090 5820
DAF-CC5
45 x 33 Inlet Velocity 140 210 280 355 425 495 565
Return Ps .010 .010 .010 .020 .025 .030 .040
NC 20 25 30 35 40 45 50
Total CFM 2000 3000 4000 5000 6000 7000 8000
60 x 51
Throw Side A 9-15 11-17 15-23 19-29 22-35 27-41 31-46
Supply
Throw Side B 8-13 10-15 13-20 16-25 20-30 23-35 27-40
Total CFM 1500 2250 3000 3750 4500 5250 6000
45 x 36 Inlet Velocity 135 200 265 335 400 465 535

Return Ps .010 .010 .010 .020 .025 .030 .040
NC 20 25 30 35 40 45 50
Total CFM 2400 3600 4800 6000 7200 8400 9600
60 x 54
Throw Side A 10-16 12-18 16-25 22-32 26-39 31-46 34-52
Supply
Throw Side B 9-15 11-17 15-24 20-30 24-36 27-42 32-48
Total CFM 1800 2700 3600 4500 5400 6300 7200
42 x 36 Inlet Velocity 170 255 340 430 515 600 685

Return Ps .010 .010 .020 .030 .040 .050 .070
NC 20 25 30 35 40 45 50

MODEL DAF CC5
Neck Velocity
200 300 400 500 600 700 800
DIFFUSERS
Face Velocity 500 750 1000 1250 1500 1750 2000

CEILING
Ps .013 .03 .05 .08 .12 .16 .21

All
Supplies Pt .016 .04 .06 .10 .14 .19 .25
Total CFM 2480 3715 450 6190 7430 8665 9900
60 x 57
Throw Side A 11-17 13-19 17-26 22-33 26-39 33-49 35-52
Supply
Throw Side B 10-16 12-18 16-24 21-30 25-36 30-46 32-50
Total CFM 1860 2790 3710 4640 5570 6500 7425
42 x 39 Inlet Velocity 165 245 325 410 490 570 655

Return Ps .010 .010 .010 .020 .030 .050 .060

CONCENTRIC SUPPLY /
NC 20 25 30 35 40 45 50
PERFORMANCE NOTES FOR SERIES DAF-CC5

DEFINITION OF UNITS
CFM Cubic Feet per Minute (Air)
Throw Cataloged Throw is horizontal distances in feet to the terminal velocities of 150 and 50fpm
with ambient supply air temperature
DAF-CC5
PERFORATED
CEILING DIFFUSERS
DIFFUSERS
CEILING
MODEL 7000 MODEL PRTB AND SPRTB MODEL 7300
MODEL 7350 MODEL 7500 AND 7550 MODEL 7600 AND 7650
CEILING DIFFUSERS
PERFORATED
MODEL 7550R-F AND 7650R-F MODEL 7900 AND 7950
Model 7000 is designed for use in most types of ceilings for efficient,
draft free air distribution. It is ideal for applications requiring a variety of air
diffusion configurations, corrosion resistant construction, and square or
rectangular face and neck size combinations. Five interchangeable air pattern
controllers with individually adjustable curved blades provide full vertical to
horizontal air pattern capability. Six frame styles and a large selection of
square and rectangular frames and neck sizes make the 7000 easy to specify
for new or existing buildings. Matching returns are available (Model 7000R). PAGE 107
Model PRTB and SPRTB are an economical choice for non-ducted plenum
return application. They are shipped without pattern controllers and are for a PAGE 118
T-Bar Grid System.

Model 7300 has a round black air pattern control disc permanently attached
to the inside center of a steel perforated face and a 1" thick plenum of
molded fiberglass with an external layer of aluminum foil. The disc provides
a 360 horizontal air pattern. The 7300 is recommended in locations where
more specific air patterns are not required and the room configuration is not
likely to change.
DIFFUSERS
PAGE 122
CEILING
Model 7350 is furnished with an extruded aluminum frame to accommodate

hinging of the steel perforated face. Four air pattern controllers are centrally
pivoted to the inside of the face. Each pattern controller can be rotated 360
to achieve 1, 2, 3 or 4-way air pattern even after the diffuser is installed.
The diffuser also features a 1" thick plenum of molded fiberglass with an
external layer of aluminum foil. PAGE 126
Model 7500 and 7550 are designed for use in ceiling applications which call
for air pattern adjustability in the field. The perforated face is hinged to swing
CEILING DIFFUSERS
open to permit easy access to four air pattern controllers centrally pivoted on
the inside face surface. These units are available in both steel and aluminum
PERFORATED
construction and are also available in round neck, 7500, or square neck,
7550. Matching returns are available (Model 7500R and Model 7550R).
PAGE 131
Model 7600 and 7650 are available in both steel and aluminum
construction. The hinged fully removable face allows access to the curve
blade pattern controllers mounted in the neck of the diffuser. These units
are available in both round neck, 7600, and square neck, 7650.
Matching returns are available (Model 7600R and Model 7650R). PAGE 147
Model 7550R-F and 7650R-F are perforated return filter diffusers designed
to be installed in standard T-Bar ceiling grids. The hinged perforated face
allows access to the filter (by others). These units are available with a 1" or
2" filter rack.
PAGE 164
Model 7900 and 7950 are designed for supply air distribution in applications
where air pattern adjustment is desired. The perforated face of the diffuser
is secured with spring clips, which allows for easy removal and access to
the cores. The modular cores are spring loaded and can be arranged in the
diffuser frame before or after installation without the use of tools and without
removing the diffuser from the ceiling. These units are available in round neck
(Model 7900) or square neck (Model 7950). PAGE 168
MODEL 7000/7000R
Model 7000 is designed for use in most types of ceilings for efficient,
draft free air distribution. The perforated face blends well with most ceiling
styles and provides the uncluttered appearance preferred by architects.
DIFFUSERS
It is ideal for applications requiring a variety of air diffusion configurations,
CEILING
corrosion resistant construction, and square or rectangular face and neck
size combinations. Six frame styles with a large selection of square and
rectangular neck sizes make the 7000 easy to specify for new or existing buildings.
Curved blade pattern controllers mounted in the neck can be adjusted from vertical to horizontal discharge pattern
Available in 1-way, 2-way opposite, 2-way corner, 3-way and 4-way air patterns
Perforated face is removable allowing access for adjustment or cleaning
Matching return available 7000R
CEILING DIFFUSERS
PERFORATED
7000/7000R

DIFFUSERS
CEILING
CEILING DIFFUSERS
PERFORATED
Max. Listed Size for

each Tile Size shown.
Tile Size Listed Size

7000/7000R
12 x 12 10 x 10
24 x 12 22 x 10
24 x 24 22 x 22
Smallest Listed Size are
available for each Tile Size
86
SUPPLY PERFORATED FACE RETURN/EXHAUST

SQUARE NECK PERFORATED FACE SQUARE NECK
CURVED PATTERN CONTROLLERS 7000R-1 Surface Mounted
7000-1 Surface Mounted 7000R-6 T-bar Lay-in
DIFFUSERS
7000-6 T-bar Lay-in
CEILING
7000R-7 Concealed Spline
7000-7 Concealed Spline 7000R-8 Tegular T-bar
7000-8 Tegular T-bar 7000R-9 Donn Fineline
7000-9 Donn Fineline Air Inlets shall be aluminum model 7000R manufactured
Air Diffusers shall be aluminum model 7000 by METALAIRE. Units shall consist of aluminum 51%
manufactured by METALAIRE. Units shall consist of free area perforated face and an aluminum border and
aluminum 51% free area perforated face and an backpan. Perforated holes shall be 3/16" diameter on
aluminum border and backpan. Perforated holes shall 1/4" staggered centers. Units shall be designed for use
be 3/16" diameter on 1/4" staggered centers. in ducted return or exhaust applications.
Outer border of units shall be extruded aluminum Outer border of units shall be extruded aluminum
CEILING DIFFUSERS

construction. The perforated face shall be removable construction. The perforated face shall be removable
PERFORATED
allowing access to the aluminum curved blade pattern allowing access to interior of diffuser. Face shall be
controller mounted into the neck of the diffusers. Face secured in place with tension spring clips.
shall be secured in place with tension spring clips. The units shall be the size and quantity as outlined in
Pattern controller blades shall be individually adjustable the plans and specifications.
and allow the discharge pattern to be adjustable from
vertical to horizontal. Pattern controller blades shall
ceiling system.
pivot in friction mounted retainers. Retainers shall hold
the deflector blade position throughout the specified
Square Neck Options and Accessories:
operating range of the device. Metal friction wires are
not acceptable. OPPOSED BLADE DAMPER
Diffusers shall be available in 1, 2-way opposite, 2-way METALAIRE model D7A aluminum or D7 steel round
7000/7000R
corner, 3, and 4-way directional air patterns. Units shall opposed blade type dampers shall be provided. Damper
have square inlets. shall consist of gang operated blades that can be
The units shall be the size and quantity as outlined in the adjusted from full open to full closed. Damper shall be
plans and specifications. adjusted with a handle accessible by opening the face of
the diffuser.
ceiling system. EQUALIZING GRID
METALAIRE model L9 aluminum square equalizing
grid shall be provided. Equalizing grid shall consist of
aluminum blades mounting in an aluminum frame.
Round Neck Optional Dampers and Accessories:
SQUARE TO ROUND TRANSITIONS

Units to have square to round transitions allowing
installation with round ductwork.

BUTTERFLY DAMPER Performance Specification
METALAIRE model BDS aluminum round butterfly type The manufacturer shall provide published performance
dampers shall be provided. Damper shall consist of data. Data shall be tested in accordance to ANSI/
two butterfly style blades that can be adjusted from full ASHRAE Standard 70-2006.
screwdriver slot that can be accessed through the face Paint Specification
DIFFUSERS
of the diffuser. Process shall be anodic electro-deposition using an

CEILING

RADIAL SHUTTER DAMPER including a pressurized spray stage using an alkaline
METALAIRE model RSD steel round radial shutter damper cleaner and de-ionized water rinse.
The damper shall be adjusted from full open to full
closed. Damper shall be adjusted with a screwdriver slot
that can be accessed through the face of the diffuser.

CEILING DIFFUSERS

PERFORATED

shall consist of gang operated blades that can be
adjusted from full open to full closed. Damper shall be
adjusted with a screwdriver slot that can be accessed
EQUALIZING GRID
METALAIRE model G3 aluminum round equalizing grid
shall be provided. Equalizing grid shall consist of
an aluminum frame.
7000/7000R
PERFORATED CEILING DIFFUSER EXTRUDED ALUMINUM
Neck
Model 6 8 9 10 12 14 15 16 18 Module
7000-1 Supply Surface Mount 6 X 12 x 12
7000R-1 Return Surface Mount 6 X
DIFFUSERS
14 x 14
8 X
CEILING
6 X
8 X 15 x 15
9 X
6 X
8 X
16 x 16
9 X
10 X
6 X
8 X
9 X 18 x 18
10 X
12 X
6 X
CEILING DIFFUSERS
8 X
PERFORATED
9 X
20 x 20
10 X
12 X
14 X
6 X
8 X
9 X
10 X 21 x 21
12 X
14 X
15 X
6 X X X X X X X X X 24 x 12
6 X
8 X
9 X
7000/7000R
10 X
12 X 24 x 24
14 X
15 X
16 X
18 X
6 X X X X X X X X X 36 x 12
6 X
8 X
9 X
10 X
12 X 36 x 24
14 X
15 X
16 X
18 X
6 X X X X X X X X X 48 x 12
6 X
8 X
9 X
10 X
12 X 48 x 24
14 X
15 X
16 X
18 X

4W D7A Aluminum Opposed Blade Damper 01 White
DIFFUSERS
Optional L9 Equalizing Grid Optional

CEILING
1W TR Square to Round Transition 02 Satin Silver

2W TR Deep Deep Square to Round Transition 03 Black
2WC G3 Round Equalizing Grid 22 Black Back Pan
3W BDS Butterfly Damper 28 Custom Color
D3 Aluminum Round Opposed Blade Damper
SD3 Steel Round Opposed Blade Damper
CEILING DIFFUSERS
PERFORATED
7000/7000R
Neck
Model 6 8 9 10 12 14 15 16 18 Module
7000-6 Supply T-Bar Lay-in 6 X 12 X 12
DIFFUSERS
7000R-6 Return T-Bar Lay-in 6 X X X X X X X X X 24 X 12
CEILING
6 X
8 X
9 X
10 X
12 X 20 X 20
14 X
15 X
16 X
18 X
6 X
CEILING DIFFUSERS
8 X
9 X
PERFORATED
10 X
12 X 24 X 24
14 X
15 X
16 X
18 X
6 X X X X X X X X X 48 X 12
6 X
8 X
9 X
10 X
7000/7000R
12 X 48 X 24
14 X
15 X
16 X
18 X


Neck
Model 6 8 9 10 12 14 15 Module
7000-7 Concealed Spline 6 X 12 X 12 (-7 Frame Only)
DIFFUSERS
7000-8 Tegular Ceiling 6 X

CEILING
7000-9 Donn Fineline 8 X

9 X
10 X 24 X 24
12 X
14 X
15 X

CEILING DIFFUSERS

PERFORATED

7000/7000R
MODEL 7000
200 300 400 500 600 700 800 900
Nominal fpm Neck Velocity
Neck Size Pv .003 .006 .010 .016 .022 .030 .040 .050
CFM 150 225 300 375 450 525 600 675
DIFFUSERS
Pt .016 .050 .060 .100 .140 .190 .250 .310
CEILING
NC < < 20 25 30 35 40 40
18 x 6 4-Way 3-4-5 3-5-6 4-6-8 6-8-11 7-10-13 8-12-15 9-14-18 10-15-20
3-Way 3-4-5 4-6-8 6-8-11 7-10-13 8-12-16 9-14-18 11-16-21 12-18-24
Throw
2-Way 4-6-8 6-8-11 7-11-14 9-13-17 11-16-21 12-18-24 14-21-28 18-27-33
1-Way 5-7-9 6-9-12 8-12-16 11-16-21 13-19-25 15-22-29 17-25-33 19-28-38
CFM 200 300 400 500 600 700 800 900
Pt .016 .045 .066 .100 .150 .200 .260 .330
NC < 20 25 25 30 35 40 40
12 x 12 4-Way 3-5-6 4-6-8 5-7-10 6-9-12 8-12-15 9-13-17 10-15-20 12-17-23
CEILING DIFFUSERS
3-Way 3-5-6 5-7-9 6-9-12 8-12-15 9-14-18 11-16-22 13-19-25 14-20-27
Throw
2-Way 5-7-9 6-9-12 8-12-16 11-16-21 12-18-24 15-22-29 17-25-33 18-27-36
PERFORATED
1-Way 6-9-12 8-12-16 10-15-20 12-18-24 15-22-29 17-25-33 18-27-36 21-31-42
CFM 270 410 545 680 815 950 1090 1225
Pt .018 .040 .070 .110 .160 .220 .280 .360
NC < 20 25 28 33 37 40 43
14 x 14 4-Way 4-5-7 4-6-9 6-9-12 7-11-14 9-14-18 10-15-20 12-18-24 14-21-28
3-Way 4-5-9 5-8-11 6-10-13 8-13-16 10-15-20 11-17-23 13-19-27 16-23-31
Throw
2-Way 5-7-10 6-9-13 8-12-18 11-17-22 12-19-26 16-23-31 18-26-36 19-29-39
1-Way 6-9-12 8-12-18 10-15-22 13-19-26 15-23-30 17-25-35 19-28-39 21-31-43
CFM 310 470 625 780 935 1090 1250 1405
Pt .018 .050 .070 .110 .160 .210 .280 .350
7000/7000R
NC < 20 25 30 35 40 40 45
15 x 15 4-Way 4-6-8 5-7-10 7-10-13 8-12-16 10-15-20 12-17-23 13-19-26 15-23-30
3-Way 5-7-9 6-9-12 8-12-15 9-14-18 11-16-22 13-19-26 15-23-30 18-26-35
Throw
2-Way 6-9-12 9-14-15 12-17-20 13-19-26 16-22-31 18-27-36 20-30-40 23-33-43
1-Way 7-11-14 9-14-18 11-18-22 14-21-28 16-24-32 19-28-38 21-31-42 23-34-45
CFM 355 590 710 885 1060 1240 1415 1595
Pt .018 .047 .070 .109 .155 .212 .280 .350
NC < 20 25 30 35 40 40 45
16 x 16 4-Way 5-7-9 6-8-11 8-10-14 9-13-18 10-15-21 13-18-27 14-20-28 16-22-31
3-Way 5-7-11 6-9-13 8-13-17 10-15-22 13-19-26 15-22-30 18-25-36 19-29-39
Throw
2-Way 6-10-12 9-14-16 11-17-24 14-21-28 17-25-32 19-26-34 21-34-40 24-34-44
1-Way 7-10-16 9-15-18 12-18-26 15-22-32 18-27-36 19-28-37 24-35-42 26-36-46
CFM 450 675 900 1125 1350 1575 1800 2025
Pt .019 .050 .070 .110 .160 .220 .290 .360
NC < 20 25 30 35 40 40 45
18 x 18 4-Way 5-7-10 6-9-12 8-12-16 10-15-20 12-18-24 14-21-28 16-24-32 18-27-36
3-Way 5-7-12 7-11-14 9-14-18 11-16-22 13-19-26 16-24-31 18-27-36 21-31-41
Throw
2-Way 8-12-18 10-15-20 13-19-26 16-24-32 20-29-39 23-34-45 26-39-52 29-43-58
1-Way 9-14-22 11-16-24 15-23-30 18-27-36 22-32-43 25-37-49 28-42-56 30-45-60

MODEL 7000R
fpm Neck
Velocity 200 300 400 500 600 700 800
Nominal
Neck Size Pv .013 .030 .050 .080 .110 .150 .200
CFM 50 75 100 125 150 175 200
DIFFUSERS
6x6
CEILING
NC < < < < 20 25 30

CFM 65 100 130 165 200 230 265
8x6
NC < < < < 20 25 30
CFM 90 130 175 220 265 310 350
8x8
NC < < < 20 25 30 35
CFM 110 170 225 280 335 390 450
9x9
NC < < < 20 25 30 35
CFM 80 125 165 205 245 290 330
10 x 6
NC < < < 20 25 30 35
CEILING DIFFUSERS
CFM 140 210 275 345 415 485 550

10 x 10
PERFORATED
NC < < < 20 25 30 35

CFM 100 150 200 250 300 350 400
12 x 6
NC < < < 20 25 30 35
CFM 200 300 400 500 600 700 800
12 x 12
NC < < < 20 25 30 35
CFM 310 470 625 780 935 1090 1250
15 x 15
NC < < 20 25 30 35 40
CFM 450 675 900 1125 1350 1575 1800
18 x 18
NC < < 20 25 30 35 40
CFM 555 830 1110 1385 1660 1940 2215
7000/7000R
20 x 20
NC < < 20 28 33 38 42
CFM 305 455 610 760 910 1065 1215
22 x 10
NC < < 20 25 30 35 40
CFM 670 1010 1345 1680 2015 2350 2690
22 x 22
NC < < 20 28 33 38 42
CFM 1040 1555 2075 2595 3115 3635 4150
34 x 22
NC < < 20 28 35 40 45
CFM 1405 2105 2810 3510 4210 4915 5615
46 x 22
NC < < 23 30 38 42 45
DEFINITION OF UNITS
DIFFUSERS
CEILING
Throw Cataloged throw is horizontal distances in feet to the terminal velocities of 150,100 and 50fpm
NC Noise criteria, sound pressure level NC ratings are based on sound power level (Lw)
re: 10-12 watts minus a 10dB room attentuation in all octave bands
CEILING DIFFUSERS
PERFORATED
7000/7000R

MODEL PRTB/SPRTB
Model PRTB and SPRTB are an economical choice for non-ducted plenum
return application. They are shipped without pattern controllers to be used
in T-Bar applications.
DIFFUSERS
Economical non ducted return

CEILING
PRTB is constructed from aluminum for corrosion resistance
SPRTB is constructed from steel for durability

CEILING DIFFUSERS
PERFORATED
PRTB/SPRTB
Available Sizes (Width x Height)

Actual Face Size
Perimeter Style T-Bar Spacing -6 -8 -9
-6 12 x 12 11 3/4 x 11 3/4
-6, -8, -9 24 x 12 23 3/4 x 11 3/4 2 7/8 x 10 7/8 23 3/8 x 11 3/8
-6, -8, -9 24 x 24 23 3/4 x 23 3/4 22 7/8 x 22 7/8 23 3/8 x 23 3/8
-6 36 x 24 35 3/4 x 23 3/4
-6 48 x 12 47 3/4 x 11 3/4
-6 48 x 24 47 x 23 3/4
SERIES PRTB SPECIFICATIONS
RETURN OR EXHAUST PERFORATED Performance Specification

FACE ONLY NON-DUCTED/SERIES PRTB The manufacturer shall provide published performance
Aluminum Steel ASHRAE Standard 70-2006.
DIFFUSERS
PRTB-6 T-bar Lay-in
CEILING
SPRTB-6 T-bar Lay-in Paint Specification
PRTB-8 Tegular T-bar
SPRTB-8 Tegular T-bar
PRTB-9 Donn Fineline cleaner and a de-ionized water rinse.
SPRTB-9 Donn Fineline
Air Inlets shall be aluminum model PRTB or steel SPRTB
manufactured by METALAIRE. Units shall be designed
for use in a non-duct return or exhaust applications.
Units shall consist of a 51% free area perforated face.
CEILING DIFFUSERS
Perforated holes shall be 3/16" diameter on
PERFORATED
1/4" staggered centers.
The units shall be the size and quantity outlined in the
ceiling system.
PRTB/SPRTB

PRTB / SPRTB MODEL NUMBER SPECIFICATION
NON-DUCTED PERFORATED FACE ONLY ALUMINUM
Model Module Available Finishes
PRTB-6 T-bar Lay-in 12 x 12 Standard
PRTB-8 Tegular T-bar 24 x 12 01 White
DIFFUSERS
PRTB-9 Donn Fineline 24 x 24 Optional

CEILING
36 x 24 02 Satin Silver
48 x 12 03 Black
48 x 24 24 MIll
28 Custom Color
NON-DUCTED PERFORATED FACE ONLY STEEL

SPRTB-6 T-bar Lay-in 12 x 12 Standard
CEILING DIFFUSERS
SPRTB-8 Tegular T-bar 24 x 12 01 White

PERFORATED
SPRTB-9 Donn Fineline 24 x 24 Optional

48 x 12 03 Black
48 x 24 28 Custom Color
PRTB/SPRTB
SERIES PRTB PERFORMANCE DATA
MODEL PRTB/SPRTB
fpm Neck Velocity 200 300 400 500 600 700 800
Nominal
Neck Size Pv 0.01 0.03 0.05 0.08 0.11 0.15 0.19
CFM 170 250 335 420 505 590 670
12 x 12
DIFFUSERS
NC < < < 20 25 30 35
CEILING
CFM 350 525 700 875 1050 1225 1400
24 x 12
NC < < 20 25 30 35 40
CFM 735 1100 1470 1835 2200 2570 2935
24 x 24
NC < < 20 28 33 38 42
CFM 1120 1680 2235 2795 3355 3915 4470
36 x 24
NC < < 25 30 35 40 45
CFM 735 1100 1470 1835 2200 2570 2935
48 x 12
NC < < 20 28 33 38 42
CEILING DIFFUSERS
CFM 1500 2250 3000 3750 4500 5250 6000
48 x 24
NC < < 20 28 33 38 42
PERFORATED
PERFORMANCE NOTES FOR SERIES PRTB / SPRTB
DEFINITION OF UNITS
PRTB/SPRTB

lperforatedface.Thediscprovidesa360
zontalairpattern.The7300isrecommendedin
tionswheremorespecificairpatternsarenot
uiredandtheroomconfigurationisnotlikelyto
nge.
erglassplenumdesignedtoallowfield
MODEL 7300
allationofinletcollar(byothers)
Nonremovablefacewithroundairpattern
Model 7300 and 7350 with fiberglass plenums is designed
ontroldiscattachedtothefacetoprovidea
to provide economical, efficient, draft free air distribution
60 horizontalairpattern
in ceiling applications where a plenum vapor barrier is
DIFFUSERS
desirable. It is designed to allow field installation of the inlet collar

vailablewithasteelfaceModel7300oran
CEILING
(by others). Model 7300 has a round black air pattern control disc permanently
luminumfaceModel7300AF
attached to the inside center of a steel perforated face. The disc provides a 360
rametype6canbeusedinsurfacemounting
horizontal air pattern. The 7300 is recommended in locations where more specific
air patterns are not required and the room configuration is not likely to change.
pplicationsbyaddingoptionalTbarPlaster
Fiberglass plenum designed to allow field installation of inlet collar (by others)
rame(TBPF) Non-removable face with round air pattern control disc attached to the face to provide a 360 horizontal air pattern
Matchingreturnavailable,7300R
Available with a steel face Model 7300 or an aluminum face Model 7300-AF
Frame type 6 can be used in surface mounting applications by adding optional T-bar Plaster Frame (TBPF)
Matching return available, 7300R
CEILING DIFFUSERS
PERFORATED
7300
98
SUPPLY PERFORATED FACE Performance Specification
INTEGRAL FIBERGLASS BACKPAN The manufacturer shall provide published performance
FIXED DEFLECTOR data. Data shall be tested in accordance to ANSI/
Fixed Steel Face Fixed Aluminum Face
DIFFUSERS
CEILING
7300-6 Surface Mounted Paint Specification
7300-6 AF Surface Mounted Process shall be anodic electro-deposition using an
Air Diffusers shall be aluminum face model 7300 or steel including a pressurized spray stage using an alkaline
face model 7300 AF manufactured by METALAIRE. Units cleaner and a de-ionized water rinse.
shall consist of 51% free area perforated face fixed to a
formed fiberglass backpan. Exposed fiberglass backpan
shall have an aluminum foil liner. The diffusers backpan
shall be factory scored to allow field installation of a tab
lock collar or spin-in fittings (by others).
Perforated holes shall be 3/16" diameter on
CEILING DIFFUSERS
1/4" staggered centers.
PERFORATED
Unit shall generate a 360 horizontal pattern with a fixed
round pattern disk mounted on the inside face of the
perforated face.
ceiling system.
7300
FOIL LINED FIBERGLASS BACK PERFORATED SUPPLY DIFFUSER
7300-6 T-bar Lay-in Steel Standard
7300-6 AF T-bar Lay-in Aluminum Face 01 White
24 x 24
7300R-6 T-bar Lay-in Steel Optional
7300R-6 AF T-bar Lay-in Aluminum Face 02 Satin Silver
03 Black
28 Custom Color

MODEL 7300
fpm Neck
Velocity 200 300 400 500 600 700 800 900 1000
Neck Size Pv .002 .006 .010 .016 .022 .030 .040 .050 .062
CFM 25 40 55 70 80 95 110 120 138
DIFFUSERS
CEILING
Pt .003 .008 .016 .025 .033 .045 .060 .076 .094

5
Throw 1-1-1 1-1-1 1-1-1 1-1-3 1-1-4 1-1-4 1-1-5 1-2-6 1-3-6
NC < < < < < < 21 24 27
CFM 40 60 80 100 115 135 155 175 196
Pt .004 .009 .016 .027 .035 .049 .066 .078 .105
6
Throw 1-1-1 1-1-1 1-1-4 1-2-4 1-2-5 1-3-6 2-3-7 2-3-8 2-4-10
NC < < < < 22 26 30 35 38
CFM 50 80 105 135 160 185 210 240 265
Pt .005 .013 .026 .036 .050 .068 .088 .115 .140
CEILING DIFFUSERS
7
Throw 1-1-1 1-1-3 1-1-4 1-2-4 1-2-5 1-3-6 2-3-7 2-3-8 2-4-10
PERFORATED
NC < < < 20 23 26 30 34 37

CFM 70 105 140 175 210 245 280 315 350
Pt .006 .013 .026 .037 .054 .073 .096 .121 .150
8
Throw 1-1-2 1-1-3 1-2-5 2-2-5 2-3-6 2-3-8 2-4-10 3-5-11 3-6-12
NC < < < 20 23 26 30 34 38
CFM 90 130 175 220 265 310 350 395 440
Pt .007 .014 .026 .042 .060 .083 .105 .134 .166
9
Throw 1-1-2 1-1-3 1-2-5 2-2-5 2-3-6 2-3-8 2-4-10 3-5-11 3-6-13
NC - - - 22 26 30 34 38 41
CFM 110 160 215 270 325 380 435 490 545
7300
Pt .008 .018 .033 .052 .075 .111 .135 .171 .212

10
Throw 1-2-3 1-2-4 1-2-5 2-3-6 2-3-7 3-4-8 3-4-10 3-5-12 4-7-14
NC < < 20 23 26 29 34 38 41
CFM 155 235 315 390 470 550 630 705 785
Pt .009 .021 .039 .059 .086 .118 .155 .194 .240
12
Throw 1-2-4 1-2-5 1-2-7 2-3-9 2-5-11 3-6-13 4-7-14 6-9-18 7-11-21
NC < 20 24 27 30 34 38 42 45
CFM 210 320 425 535 640 750 855 960 1070
Pt .010 .022 .039 .063 .091 .124 .162 .210 .253
14
Throw 1-2-6 1-3-9 2-5-11 3-6-13 4-8-16 5-9-18 7-11-23 9-13-27 10-16-32
NC < 20 24 28 32 36 40 45 48
CFM 245 370 490 610 735 860 980 1105 1225
Pt .015 .034 .060 .093 .135 .185 .240 .305 .375
15
Throw 1-3-9 2-5-11 3-6-13 4-8-16 5-10-18 7-11-23 9-13-27 10-16-32 11-16-33
NC < 23 28 33 38 43 48 53 55
DEFINITION OF UNITS
DIFFUSERS
CEILING
Throw Cataloged Throw is horizontal distances in feet to the terminal velocities of 150,100 and 50fpm
CEILING DIFFUSERS
PERFORATED
7300

perforatedface.Fourairpatterncontrollers
entrallypivotedtotheinsideoftheface.Each
erncontrollercanberotated360 toachievea
3or4wayairpatternevenafterthediffuseris
lled.
MODEL 7350
berglassplenumdesignedtoallowfield
stallationofinletcollar(byothers)
ngedremovablefacewithfourpattern
Model 7350 with a fiberglass plenum is designed to provide
economical, efficient, draft free air distribution in ceiling
ntrollerscentrallypivotedtotheinsideofthe
applications where a plenum vapor barrier is desirable. It is
DIFFUSERS
ce. designed to allow field installation of the inlet collar (by others).
CEILING
Model 7350 is furnished with an extruded aluminum frame to

chpatterncontrollercanberotated360
accommodate hinging of the steel perforated to face. Four air
hieve1,2,3or4wayairpattern
pattern
controllers are centrally pivoted to the inside of the face.
vailablewithasteelfaceModel7350or
Each pattern controller can be rotated 360 to achieve a 1, 2, 3 or
uminumfaceModel7350AF
4-way air pattern even after the diffuser is installed.
Fiberglass plenum designed to allow field installation of inlet collar (by others)
Hinged removable face with four pattern controllers centrally pivoted to the inside of the face
Each pattern controller can be rotated 360 to achieve 1, 2, 3 or 4-way air pattern
CEILING DIFFUSERS
Available with a steel face Model 7350 or aluminum face Model 7350-AF
PERFORATED
7350
SUPPLY PERFORATED FACE Diffusers shall be field adjustable allowing 1, 2-way
FIBERGLASS BACKPAN opposite, 2-way corner, 3, and 4-way directional
ADJUSTABLE PATTERN CONTROLLERS air patterns.
Steel Face Aluminum Face
DIFFUSERS
CEILING
7350-6 T-bar Lay-in Units shall be designed to integrate into the specified
7350-6 AF T-bar Lay-in ceiling system.
7350-8 Tegular T-bar
Air Diffusers shall be aluminum face model 7350 or steel Performance Specification
face model 7350 AF manufactured by METALAIRE. Units The manufacturer shall provide published performance
shall consist of a 51% free area perforated face attached data. Data shall be tested in accordance to ANSI/
to a formed fiberglass backpan. Perforated holes shall ASHRAE Standard 70-2006.
be 3/16" diameter on 1/4" staggered centers. Exposed
fiberglass backpan shall have an aluminum foil liner. Paint Specification
The diffusers backpan shall be factory scored to allow Process shall be anodic electro-deposition using an
CEILING DIFFUSERS
field installation of a tab lock collar or spin-in fittings anodic acrylic paint. Units shall undergo pre-treatment
PERFORATED
(by others). including a pressurized spray stage using an alkaline
Outer border of units shall be extruded aluminum
construction. The perforated face shall be hinged
allowing access to four adjustable pattern controllers
mounted onto the inside face of the diffuser. Face shall
be secured in place with tension spring clips. Pattern
controller blades shall be individually adjustable and
allow the discharge pattern to be adjustable from
vertical to horizontal.
7350
FOIL LINED FIBERGLASS BACK PERFORATED SUPPLY DIFFUSER HINGED FACE
7350-6 T-bar Lay-in Steel Standard
7350-6 AF T-bar Lay-in Aluminum Face 01 White
7350-8 Tegular T-bar Steel Optional
24 x 24
7350R-6 T-bar Lay-in Steel 02 Satin Silver
7350R-6 AF T-bar Lay-in Aluminum Face 03 Black
7350R-8 Tegular T-bar Steel 28 Custom Color

MODEL 7350-6
Nominal
Neck Size Pv .006 .010 .016 .023 .031 .040 .062
CFM 60 80 100 115 135 155 195
DIFFUSERS
Pt .012 .022 .034 .045 .062 .083 .131

CEILING
NC < < < - 20 24 31

6 4-Way 1-1-3 1-1-4 1-2-4 1-2-5 1-3-6 2-3-7 2-3-8
3-Way 1-1-3 1-2-4 2-2-5 2-3-6 2-3-6 2-3-8 2-4-8
Throw
2-Way 1-2-4 1-2-5 2-3-5 2-4-6 3-4-7 3-4-9 3-4-9
1-Way 1-2-5 1-3-5 3-4-6 3-4-7 3-4-8 3-5-9 3-5-10
CFM 105 140 175 210 245 280 350
Pt .017 .031 .048 .070 .095 .124 .195
NC < < < 21 26 30 36
CEILING DIFFUSERS
8 4-Way 1-1-3 1-2-5 2-2-5 2-3-6 2-3-8 2-4-10 3-5-11

3-Way 1-2-3 1-2-5 2-3-5 2-3-6 3-3-8 3-4-11 3-5-12
PERFORATED
Throw
2-Way 1-2-4 1-3-5 2-4-6 3-4-7 3-4-9 3-5-12 4-6-13
1-Way 2-3-5 2-4-5 3-4-7 3-5-8 3-5-10 3-6-13 4-6-14
CFM 165 220 270 325 380 435 545
Pt .020 .035 .053 .077 .106 .138 .218
NC < < 22 28 33 37 43
10 4-Way 1-2-4 1-2-5 2-3-6 2-3-7 3-4-8 3-4-10 3-5-12
3-Way 1-2-4 1-3-6 2-3-7 2-4-8 3-5-9 3-5-12 3-6-13
Throw
2-Way 1-2-5 2-3-6 3-4-8 3-4-8 3-6-10 3-6-14 4-7-15
1-Way 2-3-6 2-4-7 3-5-8 3-5-10 4-7-11 4-7-14 5-9-16
7350
CFM 235 315 390 470 550 630 785

Pt .032 .059 .090 .131 .180 .236 .367
NC < < 25 29 35 40 46
12 4-Way 1-2-4 2-2-8 3-3-8 3-5-10 3-5-11 4-6-12 5-7-14
3-Way 2-3-5 2-3-8 3-4-9 3-5-11 4-6-13 4-7-14 5-8-15
Throw
2-Way 2-3-6 3-4-8 3-5-11 3-6-12 4-7-13 5-8-15 6-9-16
1-Way 3-4-8 3-5-9 4-6-12 4-7-13 5-8-14 6-9-16 7-10-18
CFM 320 425 535 640 750 855 1070
Pt .039 .068 .108 .156 .213 .277 .435
NC < 23 29 34 39 44 50
14 4-Way 2-3-6 3-4-8 3-5-11 4-6-13 4-7-14 5-8-15 6-9-17
3-Way 2-4-7 3-5-9 3-6-12 4-7-14 5-8-16 5-9-17 6-10-18
Throw
2-Way 2-5-8 3-5-10 3-7-13 5-8-15 6-10-17 7-10-18 8-11-19
1-Way 3-5-9 4-8-11 4-8-14 6-9-16 7-11-18 8-12-19 9-12-20
MODEL 7350-8
Nominal
Neck Size Pv .006 .010 .016 .023 .031 .040 .062
CFM 60 80 100 115 135 155 195
DIFFUSERS
Pt .010 .017 .027 .036 .049 .065 .103
CEILING
NC < < < < 20 23 29
6 4-Way 1-1-3 1-1-4 1-2-5 1-2-6 1-4-7 2-4-8 3-4-8
3-Way 1-1-3 1-1-4 2-3-6 2-3-6 2-3-7 3-3-9 4-4-9
Throw
2-Way 1-2-4 1-2-5 2-3-7 2-4-9 3-4-10 3-3-10 3-4-10
1-Way 1-2-5 1-3-6 3-4-7 3-4-9 4-4-11 4-4-11 4-4-12
CFM 105 140 175 210 245 280 350
Pt .014 .026 .040 .058 .078 .120 .160
NC < < < 20 25 28 33
CEILING DIFFUSERS
8 4-Way 1-1-4 1-2-6 2-3-5 2-4-6 3-4-8 3-5-10 4-5-11
3-Way 1-2-4 1-2-6 2-3-6 2-4-7 4-3-8 4-4-11 4-4-12
PERFORATED
Throw
2-Way 1-3-4 1-3-6 2-4-8 3-4-9 3-4-10 3-5-12 4-5-13
1-Way 2-3-6 3-4-7 4-4-9 4-5-10 4-5-11 4-5-12 5-5-12
CFM 165 220 270 325 380 435 545
Pt .016 .029 .044 .064 .087 .114 .179
NC < < 21 27 32 34 40
10 4-Way 1-1-5 1-4-6 3-4-6 3-4-8 4-2-9 5-5-11 5-5-14
3-Way 1-3-5 2-4-6 3-4-8 4-4-8 4-5-9 5-5-12 5-7-14
Throw
2-Way 1-3-5 2-3-6 4-5-8 4-5-9 4-6-11 5-6-14 5-6-15
1-Way 3-4-6 3-4-7 5-5-9 5-5-10 5-7-12 6-7-15 6-9-17
7350
CFM 235 315 390 470 550 630 785
Pt .028 .051 .078 .113 .155 .203 .316
NC < < 24 28 34 37 44
12 4-Way 1-4-5 3-4-9 5-5-10 5-6-11 5-6-11 6-8-12 6-9-15
3-Way 3-4-6 3-4-9 5-5-10 5-6-11 5-7-11 5-8-13 6-9-16
Throw
2-Way 3-5-6 4-5-9 5-5-11 5-6-12 5-7-12 6-8-14 6-9-17
1-Way 4-5-10 5-7-12 6-8-15 6-9-13 6-10-14 7-12-16 9-13-19
CFM 320 425 535 640 750 855 1070
Pt .034 .059 .004 .134 .185 .240 .376
NC < 23 29 33 36 40 47
14 4-Way 2-5-7 4-6-10 5-7-13 6-7-14 6-8-14 7-10-15 7-11-18
3-Way 3-6-8 4-6-10 5-7-13 6-8-15 6-9-16 7-11-18 7-11-19
Throw
2-Way 3-6-8 4-6-10 5-7-13 6-8-16 6-10-17 8-11-19 8-12-19
1-Way 4-6-11 6-10-14 6-10-15 8-11-17 9-13-18 9-15-19 11-15-21

DEFINITION OF UNITS
DIFFUSERS

CEILING

Throw Cataloged throw is horizontal distances in feet to the terminal velocities of 150,100 and 50fpm
with supply air temp 20F below room air temp
CEILING DIFFUSERS
PERFORATED
7350
MODEL 7500/7550
Model 7500/7550 is designed for use in ceiling applications which
call for air pattern adjustability in the field. The perforated face is
hinged to swing open to permit easy access to four air pattern
DIFFUSERS
controllers mounted on the inside face surface.
CEILING
Available in steel (Model 7500/7550), steel backpan and aluminum face
(Model 7500/7550-AF) or aluminum (Model 7500/7550-AL) construction
Submittal: 7500
Hinged fully removable face
Perforated Supply Diffuser - 12 x 12 and 24 x 24 Module
Pattern
Round Neck - can
controllers Facebe Mounted
adjusted to Adjustable Pattern
1, 2, 3 and 4-way Controller
air patterns
Models: 7500-1 Steel Backpan & Face - Surface Mount
Round neck (Model 7500)
7500-1 DF Steel Backpan & Face - Surface Mount - Drop Face
Square neck7500-1
(ModelAF7550) Steel Backpan and Aluminum Face - Surface Mount
7500-6 Steel Backpan & Face - Lay in T-Bar
Matching returns
7500-6available
AF Steel Backpan
for Model & Aluminum Face - Lay in T-Bar
7500R/7550R
7500-6 AL Aluminum Backpan & Face - Lay in T-Bar
CEILING DIFFUSERS
Model: 7500 -1 ( Steel Backpan & Face - Surface Mount - 24 x 24 )
7500-1 AF ( Steel Backpan & Aluminum Face - Surface Mount - 24 x 24 )
PERFORATED
7500-1 DF ( Steel Backpan & Face - Surface Mount - Drop Face - 24 x 24)
Nominal Round Neck
1
O.D. - 8 Plenum
2 Concealed Spring Latches Earthquake Tab
1 2 - Concealed
38 Hinges
1 Border 1 3
8 Pattern Controller Optional Drop Face
Perforated Face (Model 7500-1 DF) 8
Ceiling Opening = 23 3 3
4 x 23 4
8 x 25 8
Model: 7500-1 ( Steel Backpan & Face - Surface Mount - 12 x 12 )

7500-1 AF ( Steel Backpan & Aluminum Face - Surface Mount - 12 x 12 )
7500-1 DF ( Steel Backpan & Face - Surface Mount - 12 x 12 )
Nominal Round Neck
Fixed 360 Radial 1
O. D. - 8 Plenum
Round Air Controller Earthquake
1 - Concealed Spring Clip Tab 2 - Concealed
1
24 Hinges
Hinged, Removable Border 1 DF

Perforated Face
7500/7550
Optional Drop Face
Ceiling Opening 11 3 3
4 x 11 4
3 x 13 3
8
Model: 7500 -6 ( Steel Backpan & Face - Lay in T-Bar - 24 x 24 )

7500-6AF (Steel Backpan & Aluminum Face - Lay in T-Bar - 24 x 24 )
7500-6AL ( Aluminum Backpan & Face - Lay in T-Bar - 24x24 )
Nominal Round Neck
1
O. D. - 8
Plenum
2 - Concealed
31
8 Hinges
Perforated Face Pattern Controller

4 x 23 4
Model: 7500 -6 ( Steel Backpan & Face - Lay in T-Bar - 12 x 12 )

7500-6AF ( Steel Backpan & Aluminum Face - Lay in T-Bar - 12 x 12 )
7500-6AL ( Aluminum Backpan & Aluminum Face - Lay in T-Bar - 12x12 )
Round Neck O.D. - 81
Plenum
Fixed 360 Radial Earthquake
Round Air Controller Tab Concealed
2 41
Hinges
Hinged, Removable Perforated Face

Overall Diffuser = 11 34 x 11 34
Air Deflection Patterns Obtained By

Fixed 360 Radial Adjusting Air Pattern Controllers
Round Air Controller
2 - Way 2 - Way 3 - Way 4 - Way
1 - Way Corner Opposite

Submittal: 7500
Perforated Supply Diffuser - 12 x 12 and 24 x 24 Module
Round Neck - Face Mounted Adjustable Pattern Controller
Models: 7500-8 Steel Backpan & Face - Tegular T-Bar
7500-8 AF Steel Backpan & Aluminum Face - Tegular T-Bar
7500-8 AL Aluminum Backpan and Face - Tegular T-Bar
7500-9 Steel Backpan & Face - 24 x 24 Donn ( USG ) Ceiling Grid
Models: 7500-8 ( Steel Backpan & Face - Tegular T-Bar - 24 x 24)

7500-8 AF ( Steel Backpan & Aluminum Face - Tegular T-Bar - 24 x 24 )
7500-8 AL ( Aluminum Backpan & Face - Tegular T-Bar - 24 x 24)
Nominal Round Neck
1
O.D. - 8 Earthquake Tab
Concealed 2 Concealed
Spring Plenum Hinges
Latches
31
8
Removable Perforated Face 3

DIFFUSERS
Pattern Controller 8
Overall Diffuser = 233 3
CEILING
4 x 234
Models: 7500-8 ( Steel Backpan & Face - Tegular T-Bar - 12 x 12 )

7500-8 AF ( Steel Backpan & Aluminum Face - Tegular T-Bar - 12 x 12 )
Nominal Round Neck
1
O.D.- 8 Concealed
Plenum
Fixed 360 Radial Hinges
Earthquake Tab
Round Air Controller 3
8
Removable Perforated Face
11 34 x 11 34
Models: 7500-9 ( Steel Backpan & Face - 24 x 24 Donn Ceiling Grid )

7500-9 AF ( Steel Backpan & Aluminum Face - 24x24 Donn Ceiling Grid )
CEILING DIFFUSERS
Nominal Round Neck

2 Concealed
Submittal: 75502 Concealed
PERFORATED
Spring Latches O.D. - 1 Earthquake Tab

8
Plenum Spring Latches
Perforated Supply Diffuser - Square1 Necks
Face Mounted Adjustable Pattern Controller
38

Pattern Controller Mount - Drop Face 3
7550-1 DF Steel Backpan & Face - Surface Removable Perforated Face 8
7550-1 AF Steel Backpan and Aluminum Overall Face 233
Diffuser- =Surface 3 Mount
4 x 234
Notes: 7550-6
(check if provided) Steel Backpan & Face - Lay in T-Bar
1. Available Finishes
7550-6 AF Steel Backpan
2. Available & Aluminum Face
Accessories - Lay in T-Bar
3. Available Options 4. Construction Details
Standard Finish:
Round Necks: Available only in listed sizes.
01 White (Border only for 7500-1 Models). G3 - Round Equalizing Grid. Pattern controllers are mounted on the back
Models:
Optional Finish ( additional 7550-1
charge ): ( BDS
Steel Backpan
- Butterfly & Face - Surface Mount )
Damper. side of the perforated face and can be
02 Satin Silver 7550-1 DF ( Steel Backpan & Face
RSD - Radial Shutter Damper. -Surface Mount - Drop Face ) to 1, 2, 3 or 4 way pattern.
adjusted
03 Black. 7550-1 AF ( Steel Backpan
Replacement Parts: & Aluminum Face - Surface Mount Seismic)tabs standard on all units.
22 (BBP) Black back pan / white face & Replacement Face Plates. Pattern controller on 12 x 12 unit is a non
border. 28 Custom Color. Replacement Drop Face Plate. Nominal adjustable disc on the perforated face.
Square Neck Size 1
- 4
Replacement Pattern Controller.
Note: All Accessories2 Shipped
Concealed Spring Plenum
2 Concealed
Unattached Latches Hinges
1
7500/7550
3 3
8 8
Revision: A Date: 11/2013 1 Border 1 Dimensions are in Inches Page:
Border 1 DF 2 of 2
Metal Industries, Inc. Clearwater, FL 8 441 - 2651
(727) Perforated
Fax (800) 865Face
8383 Pattern Controller
www.metalaire.com Optional Drop Face
[email protected]
4 x 23 4
8
x 25 3
8
Models: 7550-6 ( Steel Backpan & Face - Lay in T-Bar )

7550-6 AF ( Steel Backpan & Aluminum Face - Lay in T-Bar )
7550-6 AL ( Aluminum Backpan & Face - Lay in T-Bar )
Nominal Square
1
Neck Size - 4
2 Concealed 2 Concealed
Plenum
Spring Latches Hinges
T-Bar
31
8
Perforated Face Pattern Controller

4 x 23 4
Available Square Inlets

Air Deflection Patterns
6x6 Obtained By Adjusting
Air Pattern Controllers
8x8
10 x 10
12 x 12 1 - Way
2 - Way Corner 2 - Way Opposete 3 - Way 4 - Way
14 x 14
Available Square Inlets
6x6
16 x 16 8x8
10 x 10
12 x 12
14 x 14
16 x 16
CD132 Revision: A Date: 11/2013

Dimensions are in Inches Page: 1 of 2
DIFFUSERS
CEILING
CEILING DIFFUSERS
PERFORATED
Submittal: 7550
Perforated Supply Diffuser - Square Necks
Face Mounted Adjustable Pattern Controller
Models: 7550-8 Steel Backpan & Face - Tegular T-Bar
7550-8 AL Aluminum Backpan Face - Tegular T-Bar
7550-9 Steel Backpan & Face - 24 x 24 Donn ( USG ) Ceiling Grid
Models: 7550-8 ( Steel Backpan & Face - Tegular T-Bar )
7500/7550
7550-8 AF ( Steel Backpan & Aluminum Face - Tegular T-Bar )
7550-8 AL ( Aluminum Backpan & Face - Tegular T-Bar )
Nominal Square
1
Neck Size - 4 Plenum
2 Concealed
2 Concealed Spring Latches Hinges T-Bar
1
38 3
8
Pattern Controller Removable Perforated Face

4 x 23 4
Model: 7550-9 ( Steel Backpan & Face - 24 x 24 Donn Ceiling Grid )
Nominal Square
1
Neck Size - 4
Plenum 2 Concealed
Spring Latches
31 Donn Fineline
8
Pattern Controller Removable Perforated Face 3

8
4 x 23 4
Ceiling Grid Module = 24 x 24

1. Available
2013 Metal Industries, Inc. Finishes 2. Available Accessories 3. Available Options 4. Construction Details CD133
Standard Finish: Square Necks: Available only in listed sizes.
01 White. OBD - Steel Opposed Blade Damper. Pattern controllers are mounted on the
DIFFUSERS
CEILING
CEILING DIFFUSERS
PERFORATED
7500/7550
SERIES 7500/7550 SPECIFICATIONS
SUPPLY PERFORATED FACE RETURN RETURN OR EXHAUST
ROUND/SQUARE NECK FACE MOUNTED PERFORATED FACE
ADJUSTABLE PATTERN CONTROLLERS ROUND/SQUARE NECK
STEEL ALUMINUM FACE STEEL ALUMINUM FACE
DIFFUSERS
STEEL BACKPAN ALL ALUMINUM STEEL BACKPAN ALL ALUMINUM
CEILING
7500/7550-1 Surface Mounted Steel 7500R/7550R-1 Surface Mounted Steel
7500/7550-1 AF Surface Mounted Aluminum Face 7500R/7550R-1 AF Surface Mounted Aluminum Face
7500/7550-1 DF Surface Mounted Dropped Face 7500R/7550R-1 DF Surface Mounted Dropped Face
7500/7550-6 T-bar Lay-in Steel 7500R/7550R-6 T-bar Lay-in Steel
7500/7550-6 AF T-bar Lay-in Aluminum Face 7500R/7550R-6 AF T-bar Lay-in Aluminum Face
7500/7550-6 AL T-bar Lay-in Aluminum 7500R/7550R-6 AL T-bar Lay-in Aluminum
7500/7550-8 Tegular T-bar Steel 7500R/7550R-8 Tegular T-bar Steel
7500/7550-8 AF Tegular T-bar Aluminum Face 7500R/7550R-8 AF Tegular T-bar Aluminum Face
CEILING DIFFUSERS
7500/7550-8 AL Tegular T-bar Aluminum 7500R/7550R-8 AL Tegular T-bar Aluminum
7500/7550-9 Donn Fineline/Bolt Slot Steel 7500R/7550R-9 Donn Fineline/Bolt Slot Steel
PERFORATED
Air Outlets shall be steel model 7500/7550 or aluminum Air Inlets shall be steel model 7500/7550R or
face, steel backpan model 7500/7550-AF or all aluminum aluminum face, steel backpan model 7500/7550R-AF
model 7500/7550-AL manufactured by METALAIRE. or all aluminum model 7500/7550R-AL manufactured
Units shall consist of aluminum 51% free area by METALAIRE.
perforated face with 3/16" diameter perforated holes Units shall consist of aluminum 51% free area
on 1/4" staggered centers. The perforated face shall perforated face with 3/16" diameter perforated holes on
be hinged allowing access to four adjustable pattern 1/4" staggered centers. Units shall be designed for use in
controllers mounted onto the inside face of the outlet. ducted return or exhaust applications.
Face shall be secured in place with tension spring clips. The perforated face shall be hinged allowing access to the
Pattern controller blades shall be individually adjustable inside of the backpan.
7500/7550
and allow the discharge pattern to be adjustable from
vertical to horizontal.
Outlets shall be field adjustable allowing 1, 2-way
opposite, 2-way corner, 3, and 4-way directional
ceiling system.
air patterns.
ceiling system.

Optional Dampers and Accessories OPPOSED BLADE DAMPER
BUTTERFLY DAMPER METALAIRE model OBDA aluminum or OBD steel opposed

blade type dampers shall be provided. Damper shall
METALAIRE model BDS aluminum round butterfly type consist of gang operated blades that can be adjusted
from full open to full closed. Damper shall be adjusted
two butterfly style blades that can be adjusted from
with a screwdriver slot accessible by opening the face of
DIFFUSERS
full open to full closed. Damper shall be adjusted with

the diffuser.
CEILING
a screwdriver slot that can be accessed through the

face of the diffuser. EQUALIZING GRID
RADIAL SHUTTER DAMPER METALAIRE model L9 aluminum square equalizing grid

shall be provided. Equalizing grid shall consist aluminum
METALAIRE model RSD steel round radial shutter damper blades mounting in an aluminum frame.
radial blades that slide perpendicular to air flow direction. Performance Specification
The damper shall be adjusted from full open to full close.
CEILING DIFFUSERS

PERFORATED
Paint Specification
opposed blade type dampers shall be provided. Damper Process shall be anodic electro-deposition using an
shall consist of gang operated blades that can be anodic acrylic paint. Units shall undergo pre-treatment
adjusted from full open to full close. Damper shall be including a pressurized spray stage using an alkaline
adjusted with a screwdriver slot that can be accessed cleaner and de-ionized water rinse.
EQUALIZING GRID
METALAIRE model G3 aluminum round equalizing
grid shall be provided. Equalizing grid shall consist
of 1/2" x 1/2" x 1/2" aluminum cubed core mounting
7500/7550
in an aluminum frame.
7500/7550 MODEL NUMBER SPECIFICATION
PERFORATED CEILING DIFFUSER
SUPPLY FACE MOUNTED PATTERN CONTROLLERS
Model Neck Module Available Finishes
7500/7550-1 Surface Mount 6 12 x 12 Standard
DIFFUSERS
7500/7550-1-DF Surface Mount Drop Face 6 01 White
CEILING
7500/7550-1-AF Surface Mount Aluminum Face 8 Optional
7500/7550-6 T-Bar Lay-in Steel 10 02 Satin Silver
7500/7550-6-AF T-Bar Lay-in Aluminum Face 12 24 x 24 03 Black
7500/7550-6-AL T-Bar Lay-in Aluminum 14 22 Black Back Pan
7500/7550-8 Tegular Steel 16 28 Custom Color
7500/7550-8-AF Tegular Aluminum Face Available Accessories
7500/7550-8-AL Tegular Aluminum G3 Round Equalizing Grid
7500/7550-9 Donn Fineline / Bolt Slot Steel
CEILING DIFFUSERS
PERFORATED
7500R/7550R MODEL NUMBER SPECIFICATION
PERFORATED CEILING DIFFUSER RETURN
7500R/7550R-1 Surface Mount 6 12 x 12 Standard
7500R/7550R-1-DF Surface Mount Drop Face 6 01 White
7500R/7550R-1-AF Surface Mount Aluminum Face 8 Optional
7500R/7550R-6 T-Bar Lay-in Steel 10 02 Satin Silver
7500R/7550R-6-AF T-Bar Lay-in Aluminum Face 12 24 x 24 03 Black
7500/7550
7500R/7550R-6-AL T-Bar Lay-in Aluminum 14 22 Black Back Pan
7500R/7550R-8 Tegular Steel 16 28 Custom Color
7500R/7550R-8-AF Tegular Aluminum Face 18 Available Accessories
7500R/7550R-8-AL Tegular Aluminum G3 Equalizing Grid
7500R/7550R -9 Donn Fineline / Bolt Slot Steel BDS Butterfly Damper

MODEL 7500 (1-6)
fpm Neck Velocity 300 400 500 600 700 800 1000 1200
Module Neck Size Pv .006 .010 .016 .022 .031 .040 .062 .090
CFM 60 80 100 120 135 155 195 235
DIFFUSERS
Pt .011 .019 .030 .043 .054 .072 .114 .165

CEILING
NC <15 <15 <15 17 21 25 31 36

4-Way* 1-2-3 1-2-5 2-3-5 2-3-6 3-4-6 3-4-6 4-5-7 5-6-8
6
4-Way 1-2-4 1-2-5 2-3-6 2-4-6 3-4-7 3-5-7 4-6-8 5-6-9
Throw 3-Way 1-2-4 1-3-5 2-3-6 3-4-6 3-5-7 4-5-7 4-6-8 5-6-9
2-Way 1-2-5 2-3-5 3-4-6 3-5-6 4-5-7 4-5-7 5-6-8 5-6-9
1-Way 1-2-5 2-3-5 3-4-6 3-5-7 4-5-7 4-5-8 5-6-8 5-7-9
12 x 12
CFM 105 140 175 210 245 280 350 420

Pt .015 .027 .043 .061 .083 .109 .170 .245
CEILING DIFFUSERS
NC <15 <15 <15 20 25 30 37 43

4-Way* 1-2-5 2-3-6 3-4-7 3-5-7 4-5-8 4-6-9 5-7-10 6-7-11
PERFORATED
8
4-Way 1-2-5 2-3-6 3-4-7 3-5-8 4-6-9 4-6-9 5-7-11 6-8-12
Throw 3-Way 1-2-5 2-4-7 3-5-8 4-5-8 4-6-9 5-7-10 6-8-11 7-8-12
2-Way 2-3-6 3-4-7 4-5-8 4-6-9 5-7-9 6-7-10 6-8-11 7-9-12
1-Way 2-3-6 3-4-7 4-5-8 4-6-9 5-7-9 6-7-10 7-8-11 7-9-12
CFM 60 80 100 120 135 155 195 235
Pt .010 .019 .029 .042 .053 .070 .110 .160
NC <15 <15 <15 17 21 25 31 36
4-Way* 1-2-4 1-2-5 2-3-5 2-4-6 3-4-6 3-5-7 4-5-8 5-6-8
6
4-Way 1-2-4 1-3-5 2-3-6 3-4-7 3-4-7 3-5-7 4-6-8 5-6-9
7500/7550
Throw 3-Way 1-2-4 1-3-5 2-4-6 3-4-7 3-5-7 4-5-8 5-6-8 5-7-9
2-Way 1-3-5 2-3-6 3-4-6 3-5-7 4-5-7 4-5-8 5-6-9 5-7-9
1-Way 1-3-5 2-3-6 3-4-6 3-5-7 4-5-7 4-6-8 5-6-9 6-7-10
24 x 24
CFM 105 140 175 210 245 280 350 420

Pt .016 .028 .043 .063 .085 .111 .174 .250
NC <15 <15 <15 20 25 30 37 43
4-Way* 1-2-5 2-3-6 3-4-7 3-5-8 4-6-9 4-6-9 5-7-10 6-8-11
8
4-Way 1-2-5 2-3-7 3-4-8 3-5-9 4-6-9 4-7-10 6-8-11 7-9-12
Throw 3-Way 1-2-6 2-4-7 3-5-8 4-6-9 4-7-10 5-7-10 6-8-11 7-9-12
2-Way 2-3-6 3-5-7 4-6-8 5-6-9 5-7-10 6-7-10 7-8-12 7-9-13
1-Way 2-3-7 3-5-8 4-6-8 5-7-9 5-7-10 6-8-11 7-8-12 8-9-13
MODEL 7500 (1-6)
CFM 165 220 275 325 380 435 545 655
DIFFUSERS
Pt .023 .041 .064 .090 .123 .161 .252 .365
CEILING
NC <15 <15 15 22 28 33 42 48
4-Way* 1-3-6 2-4-8 3-5-9 4-6-10 5-7-11 5-8-11 7-9-13 8-10-14
10
4-Way 1-3-6 2-4-8 3-5-10 4-6-11 5-7-12 5-8-12 7-10-14 8-11-15
Throw 3-Way 1-3-7 2-5-9 3-6-10 5-7-1 5-8-12 6-9-13 8-10-14 9-11-16
2-Way 2-4-8 4-6-9 5-7-10 6-8-11 7-9-12 7-9-13 8-10-14 9-11-16
1-Way 2-4-8 4-6-9 5-7-11 6-8-11 7-9-12 7-9-13 9-11-15 9-12-16
CFM 235 315 395 470 550 630 785 940
Pt .025 .044 .070 .099 .135 .177 .275 .395
CEILING DIFFUSERS
NC <15 <15 17 24 31 37 45 52
4-Way* 1-3-7 3-5-10 4-6-11 5-7-12 6-8-13 6-10-14 8-11-15 10-12-17
PERFORATED
12
4-Way 1-3-7 3-5-10 4-6-12 5-7-13 6-9-14 7-10-15 8-12-17 10-13-18
Throw 3-Way 1-3-8 3-6-11 4-7-12 6-8-13 7-10-14 8-11-15 9-12-17 11-13-19
2-Way 3-5-9 5-7-11 6-8-12 7-9-13 8-10-15 9-11-16 10-12-17 11-13-19
1-Way 3-5-10 5-7-11 6-8-13 7-10-14 8-11-15 9-11-16 10-13-18 11-14-20
24 x 24
CFM 320 430 535 640 750 855 1070 1285

Pt .033 .059 .091 .131 .179 .233 .365 .527
NC <15 <15 18 27 34 41 50 56
4-Way* 2-4-8 3-6-11 5-7-13 6-8-14 7-10-15 7-11-16 9-13-18 11-14-20
14
4-Way 2-4-9 3-6-12 5-7-14 6-8-15 7-10-16 8-12-17 10-14-19 12-15-21
7500/7550
Throw 3-Way 2-4-10 3-7-13 5-8-14 7-10-15 8-12-17 9-13-18 11-14-20 13-15-22
2-Way 3-6-11 5-8-13 7-10-14 8-11-16 9-12-17 10-13-18 12-14-20 13-16-22
1-Way 3-6-11 5-8-13 7-10-15 8-11-16 9-12-17 10-13-19 12-15-21 13-16-23
CFM 420 560 700 840 975 1115 1395 1675
Pt .040 .071 .110 .159 .214 .280 .438 .631
NC <15 <15 20 29 36 43 52 60
4-Way* 2-4-10 4-6-13 5-8-14 6-10-16 7-11-17 8-13-18 11-14-20 13-16-22
16
4-Way 2-4-10 3-7-13 5-8-16 7-10-17 8-12-19 9-13-20 11-16-22 13-17-24
Throw 3-Way 2-4-11 3-8-14 5-9-16 8-11-18 9-13-19 10-14-20 13-16-23 14-18-25
2-Way 4-7-13 6-9-15 8-11-16 9-13-18 10-14-19 12-15-21 13-16-23 15-18-25
1-Way 4-7-13 6-9-15 8-11-17 9-13-18 10-14-20 12-15-21 14-17-24 15-18-26

MODEL 7500 (8-9)
CFM 60 80 100 120 135 155 195 235
DIFFUSERS
Pt .011 .020 .031 .045 .057 .075 .119 .172

CEILING
NC <15 <15 <15 <15 17 21 28 32

4-Way* 1-1-2 1-2-3 1-2-4 2-2-4 2-3-4 2-3-5 3-4-5 3-4-6
6
4-Way 1-2-4 1-3-5 2-3-6 3-4-7 3-5-7 4-5-8 4-6-9 5-7-10
Throw 3-Way 1-2-4 2-3-5 2-3-6 3-4-7 3-5-7 4-5-8 4-6-9 5-7-10
2-Way 1-2-5 2-3-6 3-4-6 3-5-7 4-5-7 4-6-8 5-6-9 6-7-10
1-Way 2-3-5 3-4-6 3-5-7 4-5-7 4-5-8 5-6-8 5-7-9 6-7-10
12 x 12
CFM 105 140 175 210 245 280 350 420
Pt .014 .025 .038 .055 .075 .098 .153 .221
NC <15 <15 <15 <15 20 25 32 36
CEILING DIFFUSERS
4-Way* 1-2-3 1-2-4 2-3-5 2-3-5 2-4-6 3-4-6 3-5-7 4-5-7

PERFORATED
8
4-Way 1-2-5 2-4-7 3-5-8 4-5-9 4-6-10 5-7-11 6-8-12 7-9-13
Throw 3-Way 1-3-5 2-4-7 3-5-8 4-5-9 4-6-10 5-7-11 6-8-12 7-9-13
2-Way 2-3-6 3-4-8 4-5-9 4-6-9 5-7-10 5-8-11 7-9-12 8-9-13
1-Way 2-4-7 3-5-8 4-6-9 5-7-10 6-7-10 6-8-11 7-9-12 8-10-13
7500/7550
MODEL 7500 (8-9)
CFM 60 80 100 120 135 155 195 235
DIFFUSERS
Pt .011 .020 .031 .045 .057 .075 .119 .172
CEILING
NC <15 <15 <15 <15 17 21 28 32
4-Way* 1-1-3 1-2-3 1-2-4 2-3-4 2-3-4 2-3-5 3-4-5 3-4-6
6
4-Way 1-2-4 2-3-6 2-4-7 3-4-7 3-5-8 4-6-8 5-7-9 6-7-10
Throw 3-Way 1-2-4 2-3-6 2-4-7 3-4-7 3-5-8 4-6-8 5-7-9 6-7-10
2-Way 1-3-5 2-3-6 3-4-7 3-5-7 4-6-8 4-6-8 5-7-9 6-7-10
1-Way 2-3-5 3-4-6 3-5-7 4-5-8 4-6-8 5-6-9 6-7-10 6-8-11
CFM 105 140 175 210 245 280 350 420
Pt .014 .025 .038 .055 .075 .098 .153 .221
NC <15 <15 <15 <15 20 25 32 36
4-Way* 1-2-3 1-2-4 2-3-5 2-3-6 3-4-6 3-4-6 4-5-7 4-6-8
8
4-Way 1-2-6 2-4-8 3-5-9 4-6-10 4-7-10 5-8-11 6-9-12 8-10-14
CEILING DIFFUSERS
Throw 3-Way 1-3-6 2-4-8 3-5-9 4-6-10 4-7-10 5-8-11 6-9-12 8-10-14
PERFORATED
2-Way 2-3-7 3-5-8 4-6-9 5-7-10 5-8-11 6-8-11 7-9-13 8-10-14
1-Way 2-4-7 3-5-8 4-6-9 5-7-10 6-8-11 7-8-12 7-9-13 8-10-14
CFM 165 220 275 325 380 435 545 655
Pt .016 .029 .046 .064 .087 .114 .179 .259
NC <15 <15 <15 16 22 28 37 42
4-Way* 1-2-4 2-3-6 2-3-6 3-4-7 3-5-7 4-5-8 5-6-9 5-7-10
10
4-Way 1-3-7 2-5-10 4-6-11 5-7-12 5-8-13 6-9-14 8-11-16 9-12-17
Throw 3-Way 2-3-7 3-5-10 4-6-11 5-7-12 5-8-13 6-9-14 8-11-16 9-12-17
2-Way 2-4-8 4-6-10 5-7-11 6-8-12 7-9-13 7-10-14 9-11-16 10-12-17
1-Way 3-5-9 4-7-10 5-8-11 6-9-12 8-10-14 8-10-14 9-11-16 10-13-18
24 x 24
CFM 235 315 395 470 550 630 785 940
Pt .021 .037 .059 .083 .113 .149 .231 .331
7500/7550
NC <15 <15 <15 17 25 31 40 43
4-Way* 1-2-5 2-3-7 3-4-8 3-5-8 46-9 4-7-10 5-8-11 7-8-12
12
4-Way 2-4-8 3-6-11 5-7-13 6-8-14 7-10-16 8-11-17 9-13-19 11-14-20
Throw 3-Way 2-4-8 3-6-11 5-7-13 6-8-14 7-10-16 8-11-17 9-13-19 11-14-20
2-Way 3-5-10 5-7-12 6-8-13 7-10-15 8-11-16 8-12-17 11-13-19 12-15-21
1-Way 3-6-11 5-8-12 7-10-14 8-11-15 9-11-16 10-12-17 11-14-19 12-15-21
CFM 320 430 535 640 750 855 1070 1285
Pt .023 .041 .063 .091 .124 .162 .253 .365
NC <15 <15 <15 19 27 34 45 50
4-Way* 2-3-6 3-4-8 3-5-9 4-6-10 4-7-11 5-8-11 6-9-13 8-10-14
14
4-Way 2-4-10 3-7-13 5-8-15 7-10-17 8-12-18 9-13-19 11-15-22 13-17-24
Throw 3-Way 2-5-10 4-7-13 6-8-15 7-10-17 8-12-18 9-13-19 11-15-22 13-17-24
2-Way 3-6-12 5-8-14 7-10-16 8-12-17 9-13-19 10-14-20 13-16-22 14-17-24
1-Way 4-7-12 6-9-14 8-11-16 9-12-18 11-13-19 12-14-20 13-16-22 14-18-25
CFM 420 560 700 840 975 1115 1395 1675
Pt .025 .045 .070 .100 .135 .177 .276 .398
NC <15 <15 <15 21 29 36 48 54
4-Way* 2-3-7 3-4-9 4-6-10 4-7-11 5-8-12 6-9-13 7-10-14 9-11-16
16
4-Way 2-5-11 4-8-15 6-9-18 8-11-19 9-13-21 10-15-22 13-18-25 15-19-27
Throw 3-Way 2-5-11 4-8-15 6-9-18 8-11-19 9-13-21 10-15-22 13-18-25 15-19-27
2-Way 4-7-14 6-9-16 8-11-18 9-14-20 10-15-21 12-16-23 15-18-25 16-20-28
1-Way 4-8-14 7-10-16 9-13-18 10-14-20 12-15-22 13-16-23 15-18-26 16-20-28

MODEL 7550 (1-6)
CFM 75 100 125 150 175 200 250 300
DIFFUSERS
Pt .013 .023 .036 .052 .071 .093 .145 .209

CEILING
NC <15 <15 <15 19 25 29 36 41

4-Way* 1-2-4 1-3-5 2-3-6 3-4-6 3-4-7 3-5-7 4-6-8 5-6-9
6x6
4-Way 1-2-4 1-3-5 2-3-6 3-4-7 3-5-7 4-5-8 4-6-9 5-7-10
Throw 3-Way 1-2-5 1-3-6 2-4-6 3-5-7 4-5-8 4-6-8 5-6-9 6-7-10
2-Way 1-3-5 2-4-6 3-5-7 4-5-7 4-6-8 5-6-8 5-7-9 6-7-10
1-Way 2-3-5 2-4-6 3-5-7 4-5-7 4-6-8 5-6-9 6-7-10 6-7-10
12 x 12
CFM 135 180 220 265 310 355 445 535
Pt .017 .031 .046 .067 .092 .121 .190 .275
NC <15 <15 <15 20 27 32 39 45
CEILING DIFFUSERS
4-Way* 1-2-5 2-3-7 3-4-8 3-5-8 4-6-9 5-7-10 6-8-11 7-8-12

PERFORATED
8x8
4-Way 1-2-5 2-4-7 3-4-8 4-5-9 4-6-10 5-7-11 6-8-12 7-9-13
Throw 3-Way 1-2-6 2-4-8 3-5-9 4-6-9 5-7-10 5-8-11 7-9-12 8-9-13
2-Way 2-4-7 3-5-8 4-6-9 5-7-10 6-7-10 6-8-11 7-9-12 8-10-14
1-Way 2-4-7 3-5-8 4-6-9 5-7-10 6-8-11 6-8-11 7-9-13 8-10-14
7500/7550
MODEL 7550 (1-6)
CFM 75 100 125 150 175 200 250 300
Pt .013 .023 .036 .052 .071 .093 .145 .209
DIFFUSERS
CEILING
NC <15 <15 <15 19 25 29 36 41
4-Way* 1-2-4 1-3-5 2-3-6 3-4-7 3-5-7 4-5-8 5-6-9 5-7-9
6x6
4-Way 1-2-4 1-3-6 2-4-7 3-4-7 3-5-8 4-6-8 5-7-9 6-7-10
Throw 3-Way 1-2-5 1-3-6 2-4-7 3-5-7 4-6-8 4-6-9 5-7-10 6-7-11
2-Way 2-3-5 3-4-6 3-5-7 4-5-8 4-6-8 5-6-9 6-7-10 6-8-11
1-Way 2-3-6 3-4-6 3-5-7 4-6-8 4-6-8 5-6-9 6-7-10 6-8-11
CFM 135 180 220 265 310 355 445 535
Pt .017 .031 .046 .067 .092 .121 .190 .275
NC <15 <15 <15 20 27 32 39 45
4-Way* 1-3-5 2-4-7 3-4-8 4-5-9 4-6-10 5-7-10 5-8-11 7-9-13
8x8
4-Way 1-2-6 2-4-8 3-5-9 4-6-10 4-7-10 5-7-11 6-9-13 7-10-14
CEILING DIFFUSERS
Throw 3-Way 1-2-6 2-4-8 3-5-9 4-6-10 5-7-11 6-8-11 7-9-13 8-10-14
PERFORATED
2-Way 2-4-7 3-5-8 4-6-9 5-7-10 6-8-11 7-8-12 8-9-13 8-10-14
1-Way 2-4-7 3-5-9 4-6-9 5-7-10 6-8-11 7-8-12 8-9-13 8-10-15
CFM 210 280 345 415 485 555 695 835
Pt .023 .040 .061 .088 .120 .158 .247 .357
NC <15 <15 15 22 29 34 42 47
4-Way* 1-3-7 3-5-9 4-6-10 4-7-11 5-8-12 6-9-13 8-10-14 9-11-16
10 x 10
4-Way 1-3-7 2-5-9 4-6-11 5-7-12 5-8-13 6-9-14 8-11-16 9-12-17
Throw 3-Way 1-3-8 2-5-10 4-7-11 5-8-12 6-9-13 7-10-14 9-11-16 10-12-18
2-Way 3-5-9 4-6-10 5-8-12 6-9-13 7-10-14 8-10-15 9-12-16 10-13-18
1-Way 3-5-9 4-6-11 5-8-12 6-9-13 7-10-14 8-11-15 10-12-17 11-13-18
24 x 24
CFM 300 400 500 600 700 800 1000 1200
Pt .023 .040 .063 .090 .123 .160 .250 .360
7500/7550
NC <15 <15 15 23 30 35 44 50
4-Way* 2-4-8 3-5-11 5-7-12 5-8-13 6-9-14 7-11-15 9-12-17 11-13-19
12 x 12
4-Way 2-4-8 3-6-11 4-7-13 6-8-15 7-10-16 7-11-17 9-13-19 11-15-21
Throw 3-Way 2-4-10 3-6-12 4-8-14 6-10-15 7-11-16 9-12-17 11-14-19 12-15-21
2-Way 3-6-11 5-8-12 6-10-14 8-11-15 9-12-16 10-12-18 11-14-20 12-15-21
1-Way 3-6-11 5-8-13 6-10-14 8-11-16 9-12-17 10-13-18 12-14-20 13-16-22
CFM 410 545 680 815 955 1090 1360 1635
Pt .023 .041 .064 .092 .126 .164 .255 .369
NC <15 <15 16 24 31 37 46 51
4-Way* 2-4-9 3-6-13 5-8-14 6-9-16 7-11-17 8-13-18 10-14-20 13-16-22
14 x 14
4-Way 2-4-10 3-7-13 5-8-15 7-10-17 8-11-18 9-13-20 11-15-22 13-17-24
Throw 3-Way 2-4-11 3-7-14 5-9-16 7-11-17 9-13-19 10-14-20 12-16-22 14-17-25
2-Way 4-7-13 6-9-14 7-11-16 9-13-18 10-14-19 12-14-20 13-16-23 14-18-25
1-Way 4-7-13 6-9-15 7-11-17 9-13-18 10-14-20 12-1521 14-17-23 15-18-26
CFM 535 710 890 1065 1245 1420 1780 2135
Pt .026 .046 .073 .104 .143 .186 .291 .419
NC <15 <15 16 24 33 39 49 53
4-Way* 2-5-11 4-7-14 6-9-16 7-11-18 8-13-19 10-14-21 12-16-23 14-18-25
16 x 16
4-Way 2-5-11 4-7-15 6-9-18 7-11-19 9-13-21 10-15-22 12-18-25 15-19-27
Throw 3-Way 2-5-13 4-9-16 6-11-18 9-13-20 10-15-21 11-16-23 14-18-26 16-20-28
2-Way 4-8-14 7-10-17 8-13-18 10-14-20 12-15-22 13-17-23 15-18-26 17-20-29
1-Way 4-8-15 7-10-17 8-13-19 10-15-21 12-16-22 13-17-24 16-19-27 17-21-29

MODEL 7550 (8-9)
CFM 75 100 125 150 175 200 250 300
DIFFUSERS
Pt .012 .022 .034 .048 .066 .086 .134 .184

CEILING
NC <15 <15 <15 19 25 29 36 40

4-Way* 1-1-3 1-2-4 1-2-4 2-3-4 2-3-5 2-4-5 3-4-6 4-4-6
6x6
4-Way 1-2-5 2-3-6 2-4-7 3-5-8 4-5-8 4-6-9 5-7-10 6-8-11
Throw 3-Way 1-2-5 2-3-6 3-4-7 3-5-8 4-5-8 4-6-9 5-7-10 6-8-11
2-Way 1-3-5 2-4-6 3-5-7 4-5-8 4-6-9 5-6-9 6-7-10 6-8-11
1-Way 2-3-6 3-4-7 3-5-7 4-6-8 5-6-9 5-7-9 6-7-10 7-8-11
12 x 12
CFM 135 180 220 265 310 355 445 535

Pt .016 .028 .042 .061 .084 .110 .172 .249
NC <15 <15 <15 20 27 32 39 44
CEILING DIFFUSERS
4-Way* 1-2-4 2-2-5 2-3-5 2-4-6 3-4-6 3-5-7 4-5-8 5-6-8

PERFORATED
8x8
4-Way 1-3-6 2-4-8 3-5-9 4-6-10 5-7-11 5-8-12 7-9-13 8-10-15
Throw 3-Way 1-3-6 2-4-8 3-5-9 4-6-10 5-7-11 5-8-12 7-9-13 8-10-15
2-Way 2-4-7 3-5-9 4-6-10 5-7-10 6-8-11 6-9-12 8-10-14 9-11-15
1-Way 2-4-8 4-6-9 5-7-10 6-8-11 6-8-12 7-9-12 8-10-14 9-11-15
CFM 75 100 125 150 175 200 250 300
Pt .012 .022 .034 .048 .066 .086 .134 .194
NC <15 <15 <15 19 25 29 36 40
4-Way* 1-1-3 1-2-4 2-2-4 2-3-5 2-3-5 2-4-5 3-4-6 4-5-7
6x6
4-Way 1-2-5 2-3-6 3-4-7 3-5-8 4-6-9 4-6-9 5-7-11 6-8-12
Throw 3-Way 1-2-5 2-3-6 3-4-7 3-5-8 4-6-9 4-6-9 5-7-11 6-8-12
7500/7550
2-Way 2-3-6 3-4-7 3-5-8 4-6-8 4-6-9 5-7-10 6-8-11 7-8-12

1-Way 2-3-6 3-4-7 4-5-8 4-6-8 5-6-9 6-7-10 6-8-11 7-8-12
24 x 24
CFM 135 180 220 265 310 355 445 535

Pt .016 .028 .042 .061 .084 .110 .172 .249
NC <15 <15 <15 20 27 32 39 44
4-Way* 1-2-4 2-3-5 2-3-6 2-4-6 3-4-7 3-5-7 4-6-8 5-6-9
8x8
4-Way 1-3-6 2-4-9 3-5-10 4-6-11 5-7-12 6-9-13 7-10-14 9-11-15
Throw 3-Way 1-3-6 2-4-9 4-5-10 4-6-11 5-7-12 6-9-13 7-10-14 9-11-15
2-Way 2-4-8 3-5-9 4-6-10 5-8-11 6-8-12 7-9-13 8-10-14 9-11-16
1-Way 2-4-8 4-6-9 5-7-10 6-8-11 7-9-12 8-9-13 8-10-15 9-11-16
MODEL 7550 (8-9)
CFM 210 280 345 415 485 555 695 835
DIFFUSERS
Pt .023 .040 .061 .088 .120 .158 .247 .357
CEILING
NC <15 <15 15 23 30 35 42 46
4-Way* 1-2-5 2-3-6 3-4-7 3-5-8 4-5-8 4-6-9 5-7-10 6-8-11
10 x 10
4-Way 2-4-8 3-5-11 4-7-12 5-8-14 6-9-15 7-11-16 9-12-18 11-14-19
Throw 3-Way 2-4-8 3-5-11 4-7-12 5-8-14 6-9-15 7-11-16 9-12-18 11-14-19
2-Way 3-5-10 4-6-11 5-8-13 6-9-14 7-11-15 8-11-16 10-13-18 11-14-20
1-Way 3-6-10 5-7-12 6-9-13 7-10-14 9-11-15 9-12-16 11-13-18 12-14-20
CFM 300 400 500 600 700 800 1000 1200
Pt .021 .037 .058 .083 .113 .147 .230 .331
NC <15 <15 15 24 31 37 44 50
CEILING DIFFUSERS
4-Way* 2-3-6 2-4-7 3-5-9 4-6-9 4-7-10 5-7-11 6-9-12 7-9-13
PERFORATED
12 x 12
4-Way 2-4-10 3-6-13 5-8-15 6-10-16 7-11-18 9-13-19 11-15-21 13-16-23
Throw 3-Way 2-5-10 4-6-13 5-8-15 6-10-16 7-11-18 9-13-19 11-15-21 13-16-23
2-Way 3-6-11 5-8-14 6-10-15 8-11-17 9-13-18 10-14-19 12-15-21 14-17-24
1-Way 4-7-12 6-9-14 7-11-15 9-12-17 10-13-18 11-14-20 13-15-22 14-17-24
24 x 24
CFM 410 545 680 815 955 1090 1360 1635

Pt .023 .040 .062 .089 .122 .159 .248 .358
NC <15 <15 17 26 34 40 48 53
4-Way* 2-3-7 3-4-9 4-5-10 4-6-11 5-8-12 6-9-13 7-10-14 9-11-16
14 x 14
4-Way 2-5-11 4-7-15 6-9-17 7-11-19 9-13-21 10-15-22 12-1725 15-19-27
Throw 3-Way 2-5-11 4-7-15 6-9-17 7-11-19 9-13-21 10-15-22 12-17-25 15-19-27
7500/7550
2-Way 4-7-13 6-9-16 7-11-18 9-13-19 10-15-21 12-16-22 14-18-25 16-19-27
1-Way 4-8-14 7-10-16 9-13-18 10-14-20 12-15-21 13-16-23 15-18-26 16-20-28
CFM 535 710 890 1065 1245 1420 1780 2135
Pt .024 .043 .067 .096 .132 .171 .269 .387
NC <15 <15 18 28 36 42 51 56
4-Way* 2-4-7 3-5-10 4-6-11 5-7-13 6-9-14 7-10-14 8-11-16 10-13-18
16 x 16
4-Way 2-6-13 4-9-17 7-11-20 9-13-22 10-15-23 11-17-25 14-20-28 17-22-31
Throw 3-Way 3-6-13 5-9-17 7-11-20 9-13-22 10-15-23 11-17-25 14-20-28 17-22-31
2-Way 4-8-15 7-10-18 8-13-20 10-15-22 12-17-24 13-18-26 17-20-29 18-22-31
1-Way 5-9-16 8-12-18 10-15-21 12-16-23 14-17-24 15-18-26 17-21-19 18-23-32

MODEL 7500R
Neck Size Ps .010 .020 .030 .040 .050 .060 .080 .100
6 CFM 60 80 100 115 135 155 175 195
DIFFUSERS
8 CFM 105 140 175 210 245 280 315 350

CEILING
10 CFM 165 220 270 325 380 435 490 545

12 CFM 235 315 390 470 550 630 705 785
14 CFM 320 425 535 640 750 855 960 1070
16 CFM 420 560 700 835 975 1115 1255 1395
18 CFM 520 700 870 1045 1220 1395 1570 1740

CEILING DIFFUSERS
MODEL 7550R
PERFORATED
Neck Size Ps .010 .020 .030 .040 .050 .060 .080 .100
6x6 CFM 75 100 120 150 175 200 225 250
8x8 CFM 130 175 220 265 310 350 400 445
10 x 10 CFM 210 275 345 415 485 555 625 695
12 x 12 CFM 300 400 500 600 700 800 900 1000
14 x 14 CFM 410 545 680 815 950 1090 1225 1360
16 x 16 CFM 530 710 885 1060 1240 1415 1600 1770
22 x 22 CFM 1010 1345 1680 2015 2350 2690 3025 3360
7500/7550
MODEL 7600/7650
Model 7600/7650 is available in both steel and aluminum
construction. The hinged fully removable face allows access to
the curve blade pattern controllers mounted in the neck of the diffuser.
DIFFUSERS
Air patterns are available in 1, 2, 3 and 4-way air patterns.
Submittal: 7600
CEILING
Available in steel (Model 7600/7650), steel backpan and aluminum face
Perforated Supply Diffusers
(Model 7600/7650-AF) - Round
and aluminum (ModelNeck
7600/7650-AL) construction
Adjustable Neck Mounted Pattern Controller
Hinged fully removable face
Models: 7600-1 Steel Backpan & Steel Face - Surface Mount
7600-1
Pattern DF available
controllers Steel Backpan
in 1, 2, 3&and
Face - Drop
4-way air Face - Surface Mount
patterns
7600-1 AF Steel Backpan & Aluminum Face - Surface Mount
Round neck (Model 7500)
7600-6 AF Steel Backpan & Aluminum Face
Square neck (Model 7550)
7600-8
Matching Steel Model
Backpan & Face - Tegular T-Bar
return available 7600/7650R
7600-8 AL Aluminum Backpan & Face - Tegular T-Bar
CEILING DIFFUSERS
Models: 7600-1 ( Steel Backpan & Face - Surface Mount )
PERFORATED
7600-1 DF ( Steel Backpan & Face - Drop Face - Surface Mount )
7600-1 AF ( Steel Backpan & Aluminum Face - Surface Mount )
Nominal
1
Round Neck O.D. - 8
Earthquake Tab
2 Concealed Spring Latches Plenum

1
38 2 Concealed Hinges
1 Border 1 Border 1DF 3

8 Fully Adjustable And Reversible Optional Drop Face 8
Curved Blade Air Pattern Hinged, Removable Perforated Face
4 x 23 4
3 x 253
7600/7650
Nominal
1
Round Neck O.D. - 8 Earthquake Tab
Plenum
2 Concealed Spring Latches
1
Fully Adjustable And Reversible Hinged, Removable

Curved Blade Air Pattern Controller Perforated Face
4 x 23 4

Nominal
1
Round Neck O.D. - 8
Earthquake Tab
2 Concealed Spring Latches Plenum
1
Fully Adjustable And Reversible Hinged, Removable Perforated Face 3

Curved Blade Air Pattern Controller 8
4 x 234
Revision: A Inc.
2013 Metal Industries, Date: 11/2013 Dimensions are in Inches Page: 1 of 2CD147
Submittal: 7600
Perforated Supply Diffusers - Round Neck
Models: 7600-9
7600-9 AF
Model: 7600-9 ( Steel Backpan & Face - Donn Fineline Ceiling Grid )
7600-9 AF ( Steel Backpan & Aluminum Face - Donn Fineline Ceiling Grid )
Nominal
Round Neck O.D. - 1 Earthquake Tab
8
Plenum
31
8
Fully Adjustable And Reversible Hinged, Removable Perforated Face 3

Curved Blade Air Pattern Controller 8
DIFFUSERS
4 x 234
CEILING
Donn Fineline Module = 24 x 24
Available Round Inlets ( For All Models ): 6, 8, 10, 12, 14, 16
Option: Standard Air Patterns
1-Way 2-Way 3-Way 4-Way
Option: Star Air Pattern

Submittal: 7600R
Perforated Return Diffuser - Round Neck
12 x 12 and 24 x 24 Module
CEILING DIFFUSERS
Models: 7600R-1 Steel Backpan & Face - Surface Mount

7600R-1 DF Steel Backpan & Face - Surface Mount - Drop Face
PERFORATED
Changing 4-Way Air Pattern

7600R-1 AF Steel Backpan & AluminumToFace - Surface Mount
Star Pattern
7600R-6 Steel Backpan & Face - Lay in T-Bar

Using Standard 4-Way Diffuser
Rotate Air Pattern Controller
7600R-6 AF Steel Backpan & Aluminum45Face - Lay
For A More Radicalin T-Bar
"Star" Pattern
7600R-6 AL Aluminum Backpan & Face - Lay in T-Bar

1. Available
Models: Finishes( Steel Backpan
7600R-1 2. Available Accessories
& Face - 24 x 24 Surface Mount ) 3. Available Options 4. Construction Details
Standard Finish: For Round Necks (Shipped Unattached): Available only in listed sizes.
7600R-1 DF ( Steel Backpan & Face - 24 x 24 Surface Mount - Drop Face )
01 White. G3 - Round Equalizing
7600R-1 AF ( Steel Backpan & Aluminum Face - 24 Grid.
x 24 Surface Mount ) Pattern controllers are mounted in the
Optional Finish ( additional charge ): BDS - Butterfly Damper. neck of the diffuser.
Nominal Round Neck
03 Black. RSD - Radial Shutter Damper. 1 Air pattern controller can be ordered as
O.D. - 8
02 Aluminum. Replacement Parts (Shipped Unattached): Plenum 1, 2, 3 and 4 way or ST (star Pattern).
28 Custom Color. Replacement SteelLatches
2 Concealed Spring Face Plates. Earthquake Tab
Seismic tabs standard on all units.
22 (BBP) Black back pan / white face. 31 Replacement Aluminum Face Plate.
8 2 - Concealed Hinges
Replacement Pattern Controller
1 Border 1 3
Revision: A Date: 11/2013
8
Perforated Face Dimensions are
Optional inFace
Drop Inches 8 Page: 2 of 2
( Border 1 DF )
Metal Industries, Inc. Clearwater, FL (727) 441 - 2651 Fax (800)Opening
Ceiling 3 x 23 3
865 8383= 23 www.metalaire.com [email protected]
4 4
3 x 25 3
Models: 7600R-1 ( Steel Backpan & Face - 12 x 12 Surface Mount )
7600R-1 AF ( Steel Backpan & Aluminum Face - 12 x 12 Surface Mount )
7600/7650
1 - Concealed Nominal Round Neck

Spring Clip 1
O. D. - 8 Plenum
Earthquake Tab
1
Hinged, Removable Border 1 DF

Perforated Face Optional Drop Face
4 x 11 4
3 x 13 3
8
Models: 7600R-6 ( Steel Backpan & Face - 24 x 24 Lay in T-Bar )

7600R-6 AF ( Steel Backpan & Aluminum Face - 24 x 24 Lay in T-Bar )
7600R-6 AL ( Aluminum Backpan & Face - 24 x 24 Lay in T-Bar )
Nominal Round Neck
1
O. D. - 8
Plenum
1
Perforated Face
3 x 23 3

Nominal Round Neck

O.D. - 81 Plenum
Earthquake Tab
2 41 2 Concealed Hinges
Hinged, Removable
Perforated Face
Ceiling Opening 11 34 x 11 34

Submittal: 7600R
Perforated Return Diffuser - Round Neck
12 x 12 and 24 x 24 Module
Models: 7600R-8 Steel Backpan & Face - Tegular T-Bar
7600R-8 AF Steel Backpan & Aluminum Face - Tegular T-Bar
7600R-8 AL Aluminum Backpan & Face - Tegular T-Bar
7600R-9 Steel Backpan & Face - Donn Fineline Ceiling Grid
7600R-9 AF Steel Backpan & Aluminum Face - Donn Fineline Ceiling Grid
Models: 7600R-8 ( Steel Backpan & Face - 24 x 24 Tegular T-Bar )

7600R-8 AF ( Steel Backpan & Aluminum Face - 24 x 24 Tegular T-Bar )
7600R-8 AL ( Aluminum Backpan & Face - 24 x 24 Tegular T-Bar )
Nominal Round Neck
1
O.D. - 8 Earthquake Tab
Concealed Plenum
Spring Latches
8

8
4 x 234
DIFFUSERS
CEILING
Models: 7600R-8 ( Steel Backpan & Face - 24 x 24 Tegular T-Bar )
7600R-8 AF ( Steel Backpan & Aluminum Face - 24 x 24 Tegular T-Bar )
Nominal Round Neck

O.D.- 1 Plenum
8
Earthquake Tab
Concealed Hinges

8
11
3 x 11 3
4 4
Tegular T-Bar = 12 x 12
Models: 7600R-9 ( Steel Backpan & Face - 24 x 24 Donn Fineline Ceiling Grid )
7600R-9 AF ( Steel Backpan & Aluminum Face - 24 x 24 Donn Fineline Ceiling Grid ) Submittal: 7650
Nominal Round Neck
Perforated Supply Diffusers - Square Neck O.D. - 1
8
CEILING DIFFUSERS
Earthquake Tab
Concealed Plenum 2 Concealed Spring Latches
Spring Latches
1
38
PERFORATED
7650-1 DF Steel Backpan & Face - Drop Face - Surface Mount
7650-1 AF Steel Backpan & Aluminum Face - Surface Mount Removable Perforated Face
3
8
4 x 234
7650-6 AF Steel Backpan & Aluminum FaceModule- Lay in T-Bar
Size = 24 x 24
Notes: 7650-8 Steel Backpan & Face - Tegular T-Bar
(check if provided)
1. Available 7650-8 AF
Finishes Steel Backpan & Accessories
2. Available Aluminum Face - Tegular
3. Available T-BarOptions 4. Construction Details
7650-8 AL
Standard Finish: Aluminum
RoundBackpan
Necks: & Face - Tegular T-Bar Available only in listed sizes.
01 White. BDS - Butterfly Damper. Seismic tabs standard on all units.
Optional Finish ( additional charge ): RSD - Radial Shutter Damper.
Models: 7650-1 ( Steel Backpan & Face - Surface Mount )
03 Black. Replacement Parts:
02 Satin Silver
7650-1 DF ( Steel Backpan & Face - Surface Mount - Drop Face
Replacement Steel Face Plates.
)
28 Custom Color.
7650-1 AF ( Steel Backpan & Aluminum Face - Surface Mount )
Replacement Aluminum Face Plate.
22 (BBP) Black back pan / white face. Nominal
Square Neck Size - 41
Plenum
2 Concealed Hinges
3
8
1 Fully Adjustable And Reversible 3

Hinged, Removable 8
8
7600/7650
Border 1 Border 1DF

4 x 23 4
Optional Drop Face
8 x 25 8

Nominal
1
Plenum
2 Concealed Hinges
31/8

4 x 23 4

Nominal
1
Plenum
38

4 x 23 4


Submittal: 7650
Perforated Supply Diffusers - Square Neck
Models: 7650-9 Steel Backpan & Face - Donn Fineline Ceiling Grid
7650-9 AF Steel Backpan & Aluminum Face - Donn Fineline Ceiling Grid
Option: Standard Air Pattern
Star Air Pattern
Model: 7650-9 ( Steel Backpan & Face - Donn Fineline Ceiling Grid )
7650-9 AF ( Steel Backpan & Aluminum Face - Donn Fineline Ceiling Grid )
Nominal
1
Plenum
31
8
3
8
DIFFUSERS
Fully Adjustable And Reversible

Hinged, Removable Perforated Face
CEILING
Curved Blade Air Pattern Controller

4 x 23 4
Module Size = 24 x 24
Available Neck Sizes (For All Models): 6 x 6, 8 x 8, 10 x 10, 12 x 12, 14 x 14 and 16 x 16
Option: Standard Air Patterns
1-Way 2-Way 3-Way 4-Way

CEILING DIFFUSERS
Option: Star Air Pattern

Submittal: 7650R
PERFORATED
Changing 4-Way Air Pattern

To Star Pattern
Perforated Return Diffuser - Square
Using StandardNeck
4-Way Diffuser
Rotate Air Pattern Controller
12 x 12 / 12 x 24 / 24 x 24 Module
45 For A More Radical "Star" Pattern
Models: 7650R-8 Steel Backpan & Face - Tegular T-Bar

7650R-8 AF Steel Backpan & Aluminum Face - Tegular T-Bar
Notes:
7650R-8 AL Aluminum Backpan and Face - Tegular T-Bar
(check if provided)
7650R-9 Steel Backpan & Face - Donn Fineline Ceiling Grid
7650R-9 AF Steel( Backpan
Standard Finish: & Aluminum Face - Donn Fineline Ceiling
Shipped Unattached): Grid
Available only in listed sizes.
01 White. For Square Necks Pattern controllers are mounted in the
Optional Finish ( additional charge ): OBD - Steel Opposed Blade Damper. neck of the diffuser.
Models:
03 Black. 7650R-8 ( Steel Backpan
OBDA - Aluminum& Face
Opposed- Blade
24 xDamper.
24 Tegular T-Bar ) Air pattern controller can be ordered as
02 Satin Silver7650R-8 AF ( Steel L9 Backpan & Aluminum Face - 24 x 24Tegular T-Bar
- Equalizing Grid. ) 4 way or ST (star Pattern).
1, 2, 3 and
28 Custom Color. For Replacement Parts Seismic tabs standard on all units.
22 (BBP) Black back pan / white face. Replacement Steel Face Plates.
Replacement Aluminum Face Plate. 1
7600/7650

2 Concealed Hinges
Replacement Pattern Controller
Frame 2 Concealed Spring Latches
Revision: A Date: 11/20131 38 Dimensions are in Inches Page: 2 of 2
Perforated Face Plate Optional Drop Face 3
8
Face Size = Module Size - 1 41
Overall Diffuser = Module Size - 41
Module Size
Models: 7650R-9 ( Steel Backpan & Face - Donn Fineline Ceiling Grid )
7650R-9 AF ( Steel Backpan & Aluminum Face - Donn Fineline Ceiling Grid )
2 Concealed Hinges 1
Frame
3
13
8 8
Removable Perforated Face
1
Perforated Face = Module Size -1 4
1
Overall Diffuser = Module Size - 4
Module Size
Available 7650R-1 (DF)

7650R-9
Module 7650R-6 ( AF, AL) Module Available Neck Sizes
7650R-9 AF
Sizes 7650R-8 ( AF, AL)
12 x 12 12 x 12 - - 10 x 10 - - - - -
CD150 24 x 12 Metal Industries, Inc. For
24 xcomplete
24 6product
x6 specifications
8 x 8 10 x 10 and submittal
12 x 12 data, visit 16
14 x 14 us xat16
www.metalaire.com
18 x 18 22 x 22
24 x 24 24 x 12 - - - - - - - 22 x 10
Perforated Return Diffuser - Square Neck
12 x 12 / 12 x 24 / 24 x 24 Module
Models: 7650R-1 Steel Backpan & Face - Surface Mount
7650R-1 DF Steel Backpan & Face - Surface Mount - Drop Face
7650R-1 AF Steel Backpan and Aluminum Face - Surface Mount
7650R-6 Steel Backpan & Face - Lay in T-Bar
7650R-6 AF Steel Backpan & Aluminum Face - Lay in T-Bar
7650R-6 AL Aluminum Backpan & Face - Lay in T-Bar

1
Frame
8
Perforated Face Plate Border 1 DF Optional Drop

3
DIFFUSERS
1 Face (Available On 24 x 24
14 Nominal Face Sizes Only) 8
CEILING
22 3 3 3
4 x 22 4 OR 22 4 x 10 4
3
Ceiling Opening = 23 3 3 3 3
4 x 23 4 Or 23 4 x 11 4
3 3 3 3
Overall Diffuser = 25 8 x 25 8 Or 25 8 x 13 8
Available For 24 x 24 Ceiling Openings. 24 x 24 Return Available With 22 x 22 Neck Size.

24 x 12 Return Available With 22 x 10 Neck Size Only.

2 Concealed Hinges 2 Concealed
Frame
Spring Latches
13
8
Hinged Removable
Perforated Face
CEILING DIFFUSERS
4 x 11 4
PERFORATED
1
13
8 Frame
2 Concealed Hinges 2 Concealed Spring Latches
Perforated Face Plate

22 3 3 3 3
4 x 22 4 Or 22 4 x 10 4
Overaall Diffuser = 23 3
4 x 23 3 Or 23 3 x 11 3
4 4 4
Available For 24 x 24 And 24 x 12 T-Bar Lay-In Ceiling Grids.

24 x 24 Return Available With 22 x 22 Neck Size.
24 x 12 Return Available With 22 x 10 Neck Size Only.
7600/7650
2 Concealed Hinges
Frame 2 Concealed Spring Latches
13
8
Hinged Removable
Perforated Face
11 3 3
4 x 11 4


SERIES 7600/7650 SPECIFICATIONS
SUPPLY PERFORATED FACE-ROUND/ RETURN PERFORATED DIFFUSER
SQUARE NECK ADJUSTABLE NECK ROUND/SQUARE NECK
MOUNTED CURVED BLADE PATTERN
STEEL ALUMINUM FACE
CONTROLLERS
STEEL BACKPAN ALL ALUMINUM
DIFFUSERS
STEEL ALUMINUM FACE 7600R/7650R-1 Surface Mounted Steel

CEILING
STEEL BACKPAN ALL ALUMINUM 7600R/7650R-1 AF Surface Mounted Aluminum Face

7600/7650-1 Surface Mounted Steel 7600R/7650R-1 DF Surface Mounted Dropped Face
7600/7650-1 AF Surface Mounted Aluminum Face 7600R/7650R-6 T-bar Lay-in Steel
7600/7650-1 DF Surface Mounted Dropped Face 7600R/7650R-6 AF T-bar Lay-in Aluminum Face
7600/7650-6 T-bar Lay-in Steel 7600R/7650R-6 AL T-bar Lay-in Aluminum
7600/7650-6 AF T-bar Lay-in Aluminum Face 7600R/7650R-8 Tegular T-bar Steel
7600/7650-6 AL T-bar Lay-in - Aluminum 7600R/7650R-8 AF Tegular T-bar Aluminum Face
7600/7650-8 Tegular T-bar Steel 7600R/7650R-8 AL Tegular T-bar Aluminum
CEILING DIFFUSERS
7600/7650-8 AF Tegular T-bar Aluminum Face 7600R/7650R-9 Donn Fineline/Bolt Slot Steel
7600/7650-8 AL Tegular T-bar Aluminum
PERFORATED
Air Inlets shall be steel model 7600/7650R or

7600/7650-9 Donn Fineline/Bolt Slot Steel aluminum face, steel backpan model 7600/7650R-AF
Air Diffusers shall be steel model 7600/7650 or aluminum or all aluminum model 7600/7650R-AL manufactured
face, steel backpan model 7600/7650-AF or all aluminum by METALAIRE.
model 7600/7650-AL manufactured by METALAIRE. Units shall consist of aluminum 51% free area perforated
Units shall consist of a 51% free area perforated face face with 3/16" diameter perforated holes on 1/4"
with 3/16" diameter perforated holes on 1/4" staggered staggered centers. Units shall be designed for use in
centers. The perforated face shall be removable ducted return or exhaust applications.
allowing access to aluminum curved blade pattern with The perforated face shall be hinged allowing access
tension spring clips. Pattern controller blades shall to the inside of the backpan.
be individually adjustable and allow the discharge
The units shall be the size and quality outlined in the
7600/7650

pattern to be adjustable from vertical to horizontal.
Pattern controller blades shall pivot in friction mounting
retainers. Retainers shall hold the deflector blade position Units shall be designed to integrate into the specified
throughout the specified operating range of the device. ceiling systems
Diffusers shall be available in 1, 2-way opposite,
Optional Dampers and Accessories Performance Specification
BUTTERFLY DAMPER
METALAIRE model BDS aluminum round butterfly type ASHRAE Standard 70-2006.
two butterfly style blades that can be adjusted from Paint Specification
DIFFUSERS
full open to full closed. Damper shall be adjusted with Process shall be anodic electro-deposition using an
CEILING
a screwdriver slot that can be accessed through the face anodic acrylic paint. Units shall undergo pre-treatment
of the diffuser. including a pressurized spray stage using an alkaline
RADIAL SHUTTER DAMPER cleaner and de-ionized water rinse.
METALAIRE model RSD steel round radial shutter damper
shall be provided. Damper shall consist of gang-operated
The damper shall be adjusted from full open to full close.
CEILING DIFFUSERS
PERFORATED
opposed blade type dampers shall be provided.
Damper shall consist of gang operated blades that can
be adjusted from full open to full close. Damper shall be
EQUALIZING GRID
METALAIRE model G3 aluminum round equalizing grid
shall be provided. Equalizing grid shall consist of
7600/7650
an aluminum frame.

METALAIRE model OBDA aluminum or OBD steel opposed
blade type dampers shall be provided. Damper shall
consist of gang operated blades that can be adjusted
from full open to full closed. Damper shall be adjusted
with a screwdriver slot accessible by opening the face
of the diffuser.
EQUALIZING GRID
METALAIRE model L9 aluminum square equalizing grid
blades mounting in an aluminum frame.

7600/7650 MODEL NUMBER SPECIFICATION
PERFORATED CEILING DIFFUSER
SUPPLY NECK MOUNTED PATTERN CONTROLLERS
7600/7650-1 Surface Mount 6 12 x 12 Standard
DIFFUSERS
7600/7650-1-DF Surface Mount Drop Face 6 01 White

CEILING
7600/7650-1-AF Surface Mount Aluminum Face 8 Optional

7600/7650-6 T-Bar Lay-in Steel 10 02 Satin Silver
7600/7650-6-AF T-Bar Lay-in Aluminum Face 12 24 x 24 03 Black
7600/7650-6-AL T-Bar Lay-in Aluminum 14 22 Black Back Pan
7600/7650-8 Tegular Steel 16 28 Custom Color
7600/7650-8-AF Tegular Aluminum Face Available Accessories
7600/7650-8-AL Tegular Aluminum G3 Equalizing Grid
7600/7650-9 Donn Fineline / Bolt Slot Steel BDS Butterfly Damper
CEILING DIFFUSERS

PERFORATED
7600R/7650R MODEL NUMBER SPECIFICATION

PERFORATED CEILING DIFFUSER RETURN
7600R/7650R-1 Surface Mount 6 12 x 12 Standard
7600R/7650R-1-DF Surface Mount Drop Face 6 01 White
7600R/7650R-1-AF Surface Mount Aluminum Face Optional
7600/7650
8
7600R/7650R-6 T-Bar Lay-in Steel 10 02 Satin Silver
7600R/7650R-6-AF T-Bar Lay-in Aluminum Face 12 24 x 24 03 Black
7600R/7650R-6-AL T-Bar Lay-in Aluminum 14 22 Black Back Pan
7600R/7650R-8 Tegular Steel 16 28 Custom Color
7600R/7650R-8-AF Tegular Aluminum Face 18 Available Accessories
7600R/7650R-8-AL Tegular Aluminum G3 Equalizing Grid
7600R/7650R-9 Donn Fineline / Bolt Slot Steel BDS Butterfly Damper
MODEL 7600 (1-6)
CFM 60 80 100 120 135 155 195 235
DIFFUSERS
Pt .015 .026 .041 .060 .075 .099 .157 .229
CEILING
NC <15 <15 <15 19 23 26 30 35
4-Way* 1-1-2 1-2-3 1-2-4 2-2-5 2-3-5 2-3-6 3-4-6 3-5-7
6
4-Way 1-2-4 2-3-5 2-4-6 3-4-6 3-5-7 4-5-7 5-6-8 5-6-9
Throw 3-Way 2-2-5 2-3-6 3-4-7 3-5-7 4-5-8 4-6-8 5-6-9 6-7-10
2-Way 2-3-5 2-3-6 3-4-7 3-5-8 4-6-8 4-6-9 6-7-10 6-8-11
1-Way 4-6-9 5-7-10 7-8-11 7-9-12 8-9-13 8-10-14 9-11-16 10-12-17
12 x 12
CFM 105 140 175 210 245 280 350 420

Pt .016 .028 .044 .063 .086 .112 .175 .252
NC <15 <15 <15 19 24 27 31 37
CEILING DIFFUSERS
4-Way* 1-2-3 1-2-4 2-3-5 2-3-6 2-4-7 3-4-8 3-5-8 4-6-9
PERFORATED
8
4-Way 2-3-6 3-4-7 3-5-8 4-6-9 4-7-9 5-7-10 6-8-11 7-9-12
Throw 3-Way 2-3-6 3-4-8 3-5-9 4-6-9 5-7-10 6-8-11 7-9-12 8-9-13
2-Way 2-3-7 3-5-9 4-6-10 5-7-11 5-8-11 6-9-12 8-10-14 9-11-15
1-Way 5-8-12 7-9-13 9-11-15 9-12-16 10-12-18 11-13-19 12-15-21 13-16-23
CFM 60 80 100 120 135 155 195 235
Pt .015 .026 .041 .060 .075 .099 .157 .229
NC <15 <15 <15 19 23 26 30 35
4-Way* 1-1-2 1-2-3 1-2-4 2-2-5 2-3-6 2-3-6 3-4-7 3-5-7
6
4-Way 1-2-5 2-3-6 3-4-6 3-5-7 3-5-7 4-5-8 5-6-9 6-7-10
Throw 3-Way 2-3-5 2-3-6 3-4-7 3-5-7 4-6-8 4-6-9 5-7-10 6-7-10
7600/7650
2-Way 2-3-5 2-4-7 3-5-8 4-5-8 4-6-9 5-7-10 6-8-11 7-8-12
1-Way 4-6-9 6-8-11 7-8-12 8-9-13 8-10-14 9-10-15 10-12-17 11-13-18
24 x 24
CFM 105 140 175 210 245 280 350 420

Pt .016 .028 .044 .063 .086 .112 .175 .252
NC <15 <15 <15 19 24 27 31 37
4-Way* 1-2-3 1-2-4 2-3-5 2-3-7 3-4-7 3-4-8 4-5-9 4-7-10
8
4-Way 2-3-6 3-4-7 3-5-8 4-6-9 5-7-10 5-7-10 7-8-12 7-9-13
Throw 3-Way 2-3-7 3-4-8 4-5-9 4-7-10 5-8-11 6-8-11 7-9-13 8-10-14
2-Way 2-4-7 3-5-9 4-6-10 5-7-11 6-8-12 6-9-13 8-10-14 9-11-16
1-Way 5-8-12 7-10-14 9-11-16 10-12-17 11-13-19 11-14-20 13-16-22 14-17-24

MODEL 7600 (1-6)
CFM 165 220 275 325 380 435 545 655
DIFFUSERS
Pt .017 .030 .047 .066 .090 .118 .186 .268

CEILING
NC <15 <15 <15 20 25 29 34 39

4-Way* 1-2-4 2-3-5 2-3-7 3-4-8 3-5-9 4-5-10 5-7-11 5-8-12
10
4-Way 2-4-8 3-5-9 4-6-10 5-7-11 6-9-12 7-9-13 8-10-15 9-11-16
Throw 3-Way 3-4-8 4-6-10 5-7-11 5-8-12 6-9-13 7-10-14 9-11-16 10-12-18
2-Way 3-4-9 4-6-11 5-7-13 6-9-14 7-10-15 8-11-16 10-13-18 11-14-20
1-Way 7-10-15 9-12-18 11-14-20 12-15-21 13-16-23 14-18-25 16-20-28 18-21-30
CFM 235 315 395 470 550 630 785 940
Pt .018 .033 .052 .074 .101 .133 .206 .295
NC <15 <15 15 22 27 31 36 42
CEILING DIFFUSERS
4-Way* 2-2-5 2-3-7 3-4-8 3-5-10 4-6-11 4-7-12 5-8-13 7-10-15

PERFORATED
12
4-Way 3-5-9 4-6-11 5-8-12 6-9-13 7-10-15 8-11-16 10-12-17 11-13-19
Throw 3-Way 3-5-10 4-7-12 5-8-14 7-10-15 8-11-16 9-12-17 11-14-19 12-15-21
2-Way 4-5-11 5-7-14 6-9-15 7-11-17 8-12-18 9-14-19 12-15-21 14-17-23
1-Way 8-12-18 11-15-21 14-17-24 15-18-26 16-20-28 17-21-30 19-24-33 21-26-36
24 x 24
CFM 320 430 535 640 750 855 1070 1285

Pt .017 .031 .048 .068 .094 .122 .191 .276
NC <15 <15 16 24 29 33 38 44
4-Way* 2-3-6 3-4-8 3-5-10 4-6-11 4-7-13 5-8-14 6-10-16 8-11-17
14
4-Way 3-5-11 5-7-13 6-9-14 7-11-16 8-12-17 9-13-18 12-14-20 13-16-22
Throw 3-Way 4-6-11 5-8-14 6-10-16 8-11-17 9-13-19 10-14-20 13-16-22 14-17--25
7600/7650
2-Way 4-6-12 6-8-16 7-10-18 8-12-19 10-15-21 11-16-22 14-18-25 16-19-27

1-Way 9-14-21 13-17-25 16-19-27 17-21-30 19-23-33 20-25-35 22-27-39 25-30-43
CFM 420 560 700 840 975 1115 1395 1675
Pt .019 .033 .052 .075 .101 .132 .206 .297
NC <15 <15 17 25 30 34 39 46
4-Way* 2-3-7 3-4-9 4-5-11 4-7-13 5-8-15 6-9-16 7-11-18 9-13-20
16
4-Way 4-6-12 5-8-15 7-10-16 8-12-18 9-14-19 11-15-21 13-16-23 15-18-25
Throw 3-Way 4-7-13 6-9-16 7-11-18 9-13-20 10-15-21 12-16-23 15-18-26 16-20-28
2-Way 5-7-14 6-9-18 8-12-20 9-14-22 11-17-24 13-18-26 16-20-29 18+22-31
1-Way 10-16-24 15-20-28 18-22-31 20-24-34 21-26-37 23-28-40 26-31-44 28-34-49
MODEL 7600 (8-9)
CFM 60 80 100 120 135 155 195 235
DIFFUSERS
Pt .015 .026 .041 .060 .075 .099 .157 .229
CEILING
NC <15 <15 <15 <15 17 20 26 32
4-Way* 1-1-3 1-2-3 1-2-4 2-3-4 2-3-4 2-3-4 3-3-5 3-4-5
6
4-Way 1-2-3 1-2-4 2-3-5 23-5 2-4-6 3-4-6 3-5-7 4-5-7
Throw 3-Way 1-2-4 2-3-4 2-3-5 3-4-5 3-4-6 3-4-6 4-5-7 4-5-7
2-Way 3-4-6 4-5-7 5-6-8 5-6-9 5-7-9 6-7-10 6-8-11 7-9-12
1-Way 3-5-7 4-6-8 5-6-9 6-7-10 6-8-11 7-8-11 7-9-13 8-10-14
12 x 12
CFM 105 140 175 210 245 280 350 420

Pt .016 .028 .044 .063 .086 .112 .175 .252
NC <15 <15 <15 15 19 22 28 34
CEILING DIFFUSERS
4-Way* 1-2-3 1-2-4 2-3-5 2-3-5 3-4-6 3-4-6 4-5-7 4-5-7
PERFORATED
8
4-Way 1-2-4 2-3-6 2-4-6 3-4-7 3-5-8 4-6-8 5-6-9 6-7-10
Throw 3-Way 1-3-5 2-4-6 3-4-6 4-5-7 4-5-8 5-6-8 5-6-9 6-7-10
2-Way 4-5-8 5-7-10 6-8-11 7-8-12 7-9-13 8-10-13 9-11-15 10-12-17
1-Way 4-7-9 6-8-11 7-9-12 8-9-13 8-10-14 9-11-15 10-12-17 11-13-19
CFM 60 80 100 120 135 155 195 235
Pt .015 .026 .041 .060 .075 .099 .157 .229
NC <15 <15 <15 <15 17 20 26 32
4-Way* 1-1-3 1-2-3 1-2-4 2-3-4 2-3-4 2-3-5 3-4-5 3-4-6
6
4-Way 1-2-3 1-2-5 2-3-5 2-3-6 3-4-6 3-4-6 4-5-7 4-6-8
Throw 3-Way 1-2-4 2-3-5 2-4-5 3-4-6 3-4-6 4-4-6 4-5-7 5-6-8
7600/7650
2-Way 3-4-7 4-5-8 5-6-8 5-7-9 6-7-10 6-7-11 7-8-12 8-9-13
1-Way 4-5-7 5-6-9 6-7-10 6-7-11 6-8-11 7-8-12 8-9-13 9-10-15
24 x 24
CFM 105 140 175 210 245 280 350 420

Pt .016 .028 .044 .063 .086 .112 .175 .252
NC <15 <15 <15 15 19 22 28 34
4-Way* 1-2-3 2-2-4 2-3-5 2-3-5 3-4-6 3-4-6 4-5-7 4-5-8
8
4-Way 1-2-4 2-3-6 2-4-7 3-4-7 3-5-8 4-6-9 5-7-10 6-7-10
Throw 3-Way 1-3-5 2-4-6 3-5-7 4-5-7 4-6-8 5-6-9 5-7-10 6-7-10
2-Way 4-6-9 5-7-10 6-8-11 7-9-12 8-9-13 8-10-14 9-11-16 10-12-17
1-Way 5-7-10 6-8-11 7-9-13 8-10-14 9-11-15 9-11-16 10-13-18 11-14-20

MODEL 7600 (8-9)
CFM 165 220 275 325 380 435 545 655
DIFFUSERS
Pt .017 .030 .047 .066 .090 .118 .186 .268

CEILING
NC <15 <15 <15 16 21 24 31 38

4-Way* 1-2-4 2-3-5 2-4-6 3-4-7 3-5-7 4-5-8 5-6-9 5-7-9
10
4-Way 1-3-6 2-4-7 3-5-8 4-6-9 4-6-10 5-7-11 6-8-12 7-9-13
Throw 3-Way 2-4-7 3-5-8 4-6-8 5-6-9 5-7-10 6-8-11 7-8-12 8-9-13
2-Way 5-7-11 6-9-13 8-10-14 9-11-15 10-12-17 10-13-18 11-14-20 13-15-22
1-Way 5-9-12 8-10-14 9-11-16 10-12-17 11-13-19 12-14-20 13-16-22 14-17-25
CFM 235 315 395 470 550 630 785 940
Pt .018 .033 .052 .074 .101 .133 .206 .295
NC <15 <15 <15 17 22 25 32 40
CEILING DIFFUSERS
4-Way* 1-3-5 2-3-7 3-4-7 3-5-8 4-6-9 5-7-9 6-7-10 7-8-11

PERFORATED
12
4-Way 1-3-7 3-4-9 4-6-10 4-7-11 5-8-12 6-8-13 7-10-14 9-11-16
Throw 3-Way 2-4-8 4-6-9 5-7-10 6-8-11 7-8-12 7-9-13 8-10-14 9-11-16
2-Way 6-8-13 8-11-15 9-12-17 11-13-18 11-14-20 12-15-21 14-17-24 15-18-26
1-Way 7-10-15 9-12-17 11-14-19 12-15-21 13-16-23 14-17-24 16-19-27 17-21-29
24 x 24
CFM 320 430 535 640 750 855 1070 1285

Pt .017 .031 .048 .068 .094 .122 .191 .276
NC <15 <15 <15 18 23 27 34 43
4-Way* 2-3-6 3-4-8 3-5-9 4-6-9 5-7-10 5-8-11 7-9-12 8-9-13
14
4-Way 2-4-8 3-5-10 4-6-12 5-8-13 6-9-14 7-10-15 9-12-17 10-13-18
Throw 3-Way 2-5-9 4-7-11 5-8-12 7-9-13 8-10-14 9-11-15 10-12-17 11-13-18
7600/7650
2-Way 7-10-15 9-12-18 11-14-20 12-15-21 13-16-23 14-18-25 16-20-28 18-22-30

1-Way 8-12-17 11-14-20 13-1-22 14-17-24 15-19-26 16-20-28 18-22-31 20-24-34
CFM 420 560 700 840 975 1115 1395 1675
Pt .019 .033 .052 .075 .101 .132 .206 .297
NC <15 <15 <15 20 24 29 36 45
4-Way* 2-3-7 3-5-9 4-6-10 5-7-11 5-8-12 6-9-12 8-10-14 9-11-15
16
4-Way 2-4-9 3-6-12 5-7-13 6-9-15 7-10-16 8-12-17 10-13-19 12-15-21
Throw 3-Way 3-6-10 5-7-12 6-9-13 7-10-15 9-11-16 10-12-17 11-13-19 12-15-21
2-Way 8-11-17 10-14-20 13-16-22 14-17-25 15-19-26 16-20-28 18-22-32 20-25-35
1-Way 9-14-20 12-16-23 15-18-25 16-20-28 17-21-30 19-23-32 21-25-36 23-28-39
MODEL 7650 (1-6)
CFM 75 100 125 150 175 200 250 300
DIFFUSERS
Pt .017 .031 .048 .070 .095 .124 .194 .279
CEILING
NC <15 <15 <15 16 21 25 30 36
4-Way* 1-1-3 1-2-3 1-2-4 2-3-5 2-3-6 2-3-6 3-4-7 3-5-8
6x6
4-Way 1-2-5 2-3-6 3-4-7 3-5-7 4-6-8 4-6-8 5-7-9 6-7-10
Throw 3-Way 2-3-5 2-4-7 3-4-7 4-5-8 4-6-9 5-7-9 6-7-10 7-8-11
2-Way 2-3-6 3-4-7 3-5-8 4-6-9 4-7-10 5-7-10 6-8-11 7-9-13
1-Way 4-7-10 6-8-11 7-9-13 8-10-14 9-11-15 9-11-16 10-13-18 11-14-20
12 x 12
CFM 135 180 220 265 310 355 445 535

Pt .020 .036 .054 .079 .108 .141 .222 .321
NC <15 <15 <15 16 21 25 30 36
CEILING DIFFUSERS
4-Way* 1-1-3 1-2-4 2-2-5 2-3-6 2-3-6 2-4-7 3-5-8 4-6-8
PERFORATED
8x8
4-Way 2-3-5 2-3-6 3-4-7 3-5-8 4-6-8 5-6-9 6-7-10 6-8-11
Throw 3-Way 2-3-6 2-4-7 3-5-8 4-6-8 4-6-9 5-7-10 6-8-11 7-8-12
2-Way 2-3-6 3-4-8 3-5-9 4-6-9 5-7-10 5-8-11 7-9-12 8-9-13
1-Way 4-7-10 6-8-12 8-9-13 8-10-15 9-11-16 10-12-17 11-13-19 12-15-21
CFM 75 100 125 150 175 200 250 300
Pt .017 .031 .048 .070 .095 .124 .194 .279
NC <15 <15 <15 16 21 25 30 36
4-Way* 1-1-3 1-2-4 2-2-5 2-3-6 2-3-6 2-4-7 3-5-8 4-6-8
6x6
4-Way 2-3-5 2-3-6 3-4-7 3-5-8 4-6-8 5-6-9 6-7-10 6-8-11
Throw 3-Way 2-3-6 2-4-7 3-5-8 4-6-8 46-9 5-7-10 6-8-11 7-8-12
7600/7650
2-Way 2-3-6 3-4-8 3-5-9 4-6-9 5-7-10 5-8-11 7-9-12 8-9-13
1-Way 4-7-10 6-8-12 8-9-13 8-10-15 9-11-16 10-12-17 11-13-19 12-15-21
24 x 24
CFM 135 180 220 265 310 355 445 535

Pt .020 .036 .054 .079 .108 .141 .222 .321
NC <15 <15 <15 16 21 25 30 36
4-Way* 1-2-4 2-2-5 2-3-6 2-4-7 3-4-8 3-5-9 4-6-10 5-7-11
8x8
4-Way 2-3-7 3-5-8 4-6-9 5-7-10 5-8-11 6-8-12 8-9-13 8-10-14
Throw 3-Way 2-4-7 3-5-9 4-6-10 5-7-11 6-9-12 7-9-13 8-10-14 9-11-16
2-Way 3-4-8 4-5-10 4-7-11 5-8-12 6-9-13 7-10-14 9-11-16 10-12-18
1-Way 6-9-14 8-11-16 10-12-18 11-14-19 12-15-21 13-16-22 14-18-25 16-19-27

MODEL 7650 (1-6)
CFM 210 280 345 415 485 555 695 835
DIFFUSERS
Pt .023 .040 .061 .089 .089 .159 .249 .359

CEILING
NC <15 <15 <15 20 26 29 36 42

4-Way* 2-2-5 2-3-6 3-4-8 3-5-9 4-5-11 4-6-11 5-8-13 6-9-14
10 x 10
4-Way 3-4-9 4-6-10 5-7-12 6-8-13 7-10-14 8-10-15 9-12-16 10-13-18
Throw 3-Way 3-5-9 4-6-11 5-8-13 6-9-14 7-11-15 8-11-18 10-13-18 11-14-20
2-Way 3-5-10 4-7-13 6-8-14 7-10-16 8-12-17 9-13-18 11-14-20 13-16-22
1-Way 7-12-17 10-14-20 13-16-22 14-17-24 15-18-26 16-20-28 18-22-31 20-24-34
CFM 300 400 500 600 700 800 1000 1200
Pt .023 .040 .063 .090 .123 .160 .250 .360
NC <15 <15 <15 18 23 28 34 40
CEILING DIFFUSERS
4-Way* 2-3-6 2-4-7 3-5-9 4-6-11 4-6-13 5-7-14 6-9-15 7-11-17

PERFORATED
12 x 12
4-Way 3-5-10 5-7-12 6-9-14 7-10-15 8-12-16 9-12-18 11-14-20 12-15-22
Throw 3-Way 4-6-11 5-7-14 6-9-15 7-11-17 9-13-18 10-14-19 12-15-22 14-17-24
2-Way 4-6-12 5-8-15 7-10-17 8-12-19 9-14-20 11-15-22 13-17-24 15-19-26
1-Way 9-14-21 12-17-24 15-19-27 17-21-29 18-22-31 19-24-34 22-27-38 24-29-41
24 x 24
CFM 410 545 680 815 955 1090 1360 1630

Pt .023 .040 .062 .089 .121 .159 .248 .356
NC <15 <15 <15 21 28 33 41 49
4-Way* 2-3-6 3-4-9 4-5-11 4-6-13 5-7-15 6-9-16 7-11-18 9-13-19
14 x 14
4-Way 4-6-12 5-8-15 7-10-16 8-12-18 9-14-19 11-15-21 13-16-23 15-18-25
Throw 3-Way 4-7-13 6-9-16 7-11-18 9-13-20 10-15-21 12-16-23 14-18-25 16-20-28
7600/7650
2-Way 5-7-14 6-9-18 8-12-20 9-14-22 11-16-24 12-18-25 16-20-28 18-23-31

1-Way 10-16-24 14-20-28 18-23-31 20-24-34 21-26-37 23-28-29 25-31-44 28-34-48
CFM 535 710 890 1070 1245 1425 1780 2135
Pt .027 .047 .074 .108 .146 .191 .298 .428
NC <15 <15 15 23 30 35 42 50
4-Way* 2-4-7 3-5-10 4-6-12 5-7-15 6-9-17 7-10-18 8-12-20 10-15-22
16 x 16
4-Way 4-7-14 6-9-17 8-11-19 9-14-20 11-16-22 12-17-23 15-19-26 17-20-29
Throw 3-Way 5-7-15 7-10-18 8-12-20 10-15-22 12-17-24 13-18-26 16-20-29 18-22-32
2-Way 5-8-16 7-11-20 9-13-23 11-16-25 12-19-27 14-20-29 18-23-32 20-25-35
1-Way 12-18-27 16-22-32 20-25-35 22-27-39 24-30-42 26-32-45 29-35-50 32-39-55
MODEL 7650 (8-9)
CFM 75 100 125 150 175 200 250 300
DIFFUSERS
Pt .017 .031 .048 .070 .095 .124 .194 .279
CEILING
NC <15 <15 16 23 27 30 34 38
4-Way* 1-1-3 1-2-4 2-2-4 2-3-4 2-3-5 2-4-5 3-4-6 4-4-6
6x6
4-Way 1-2-4 1-2-5 2-3-5 2-4-6 3-4-6 3-5-7 4-5-8 5-6-8
Throw 3-Way 1-2-4 2-3-5 3-4-5 3-4-6 4-5-6 4-5-7 4-5-8 5-6-8
2-Way 3-5-7 4-6-8 5-6-9 6-7-10 6-8-11 7-8-11 7-9-13 8-10-14
1-Way 4-6-8 5-6-9 6-7-10 6-8-11 7-9-12 7-9-13 8-10-14 9-11-16
12 x 12
CFM 135 180 220 265 310 355 445 535

Pt .020 .036 .054 .079 .108 .141 .222 .321
NC <15 <15 17 25 30 34 38 41
CEILING DIFFUSERS
4-Way* 1-2-4 2-3-5 2-3-5 2-4-6 3-4-6 3-5-7 4-5-7 5-6-8
PERFORATED
8x8
4-Way 1-2-5 2-3-6 3-4-7 3-5-8 4-6-9 4-6-9 5-7-10 6-8-11
Throw 3-Way 2-3-6 3-4-6 3-5-7 4-6-8 5-6-9 5-6-9 6-7-10 6-8-11
2-Way 4-6-9 5-8-11 7-8-12 8-9-13 8-10-14 9-11-15 10-12-17 11-13-19
1-Way 5-8-11 7-9-12 8-10-14 9-11-15 9-11-16 10-12-17 11-14-19 12-15-21
CFM 75 100 125 150 175 200 250 300
Pt .017 .031 .048 .070 .095 .124 .194 .279
NC <15 <15 16 23 27 30 34 38
4-Way* 1-1-3 1-2-4 2-2-4 2-3-5 2-3-5 3-4-5 3-4-6 4-5-6
6x6
4-Way 1-2-4 1-3-5 2-3-6 3-4-6 3-4-7 3-5-7 4-6-8 5-6-9
Throw 3-Way 1-2-4 2-3-5 3-4-6 3-4-6 4-5-7 4-5-7 5-6-8 5-6-9
7600/7650
2-Way 3-5-7 4-6-8 5-7-9 6-7-10 6-8-11 7-8-12 8-9-13 8-10-15
1-Way 4-6-8 5-7-10 6-8-11 7-8-12 7-9-13 8-10-14 9-11-15 10-12-17
24 x 24
CFM 135 180 220 265 310 355 445 535

Pt .020 .036 .054 .079 .108 .141 .222 .321
NC <15 <15 17 25 30 34 38 41
4-Way* 1-2-4 2-3-5 2-3-5 3-4-6 3-5-7 3-5-7 4-6-8 5-6-9
8x8
4-Way 1-2-5 2-3-7 3-4-8 3-5-8 4-6-9 4-7-10 6-8-11 7-8-12
Throw 3-Way 2-3-6 3-4-7 3-5-8 4-6-8 5-6-9 6-7-10 6-8-11 7-8-12
2-Way 4-6-10 6-8-11 7-9-13 8-10-14 9-11-15 9-11-16 10-13-18 11-14-20
1-Way 5-8-11 7-9-13 8-10-14 9-11-16 10-12-17 10-13-18 12-14-20 13-16-22

MODEL 7650 (8-9)
CFM 210 280 345 415 485 555 695 835
DIFFUSERS
Pt .023 .040 .061 .089 .121 .158 .248 .358

CEILING
NC <15 <15 18 26 32 36 41 44
4-Way* 1-2-5 2-3-6 3-4-7 3-5-8 4-6-8 4-6-9 5-7-10 6-8-11
10 x 10
4-Way 1-3-6 2-4-8 3-5-9 4-6-10 5-7-11 6-8-12 7-9-13 8-10-15
Throw 3-Way 2-4-7 4-5-9 4-7-9 5-7-10 6-8-11 7-8-12 8-9-13 8-10-15
2-Way 5-8-12 7-10-14 9-11-16 10-12-17 11-13-19 12-14-20 13-16-22 14-17-25
1-Way 7-10-14 9-11-16 10-13-18 11-14-20 12-15-21 13-1623 15-18-25 16-20-28
CFM 300 400 500 600 700 800 1000 1200
Pt .023 .040 .063 .090 .123 .160 .250 .360
NC <15 <15 21 29 35 39 43 46
CEILING DIFFUSERS
4-Way* 2-3-6 3-4-7 3-5-8 4-6-9 5-7-10 5-7-10 7-8-12 7-9-13

PERFORATED
12 x 12
4-Way 2-4-8 3-5-10 4-6-11 5-8-12 6-9-13 7-10-14 8-11-16 10-12-18
Throw 3-Way 2-5-9 4-6-10 5-8-11 6-9-12 7-10-13 8-10-14 9-11-16 10-12-18
2-Way 6-10-15 8-12-17 11-13-19 12-15-21 13-16-22 14-17-24 15-19-27 17-21-29
1-Way 8-12-17 10-14-19 12-15-22 14-17-24 15-18-25 16-19-27 18-22-30 19-24-33
24 x 24
CFM 410 545 680 815 955 1090 1360 1635

Pt .024 .043 .067 .096 .131 .171 .266 .385
NC <15 <15 21 30 37 41 46 49
4-Way* 2-3-7 3-5-9 4-6-10 5-7-11 5-8-11 6-9-12 8-10-14 9-11-15
14 x 14
4-Way 2-4-9 3-6-12 5-7-13 6-9-15 7-10-16 8-12-17 10-13-19 12-15-21
Throw 3-Way 3-6-10 5-7-12 6-9-13 7-10-15 9-11-16 10-12-17 11-13-19 12-15-21
7600/7650
2-Way 7-11-17 10-14-20 12-16-22 14-17-24 15-19-26 16-20-28 18-22-31 20-24-34

1-Way 9-14-19 12-16-22 14-18-25 16-19-27 17-21-30 18-22-32 20-25-35 22-27-39
CFM 535 710 890 1065 1245 1420 1780 2135
Pt .027 .047 .074 .107 .146 .190 .298 .428
NC <15 <15 22 31 38 42 48 52
4-Way* 2-4-8 3-5-10 4-7-11 5-8-12 6-9-13 7-10-14 9-11-16 10-12-17
16 x 16
4-Way 2-5-10 4-7-13 6-8-15 7-10-17 8-12-18 9-13-19 11-15-21 13-17-24
Throw 3-Way 3-6-12 6-8-14 7-11-15 8-12-17 10-13-18 11-14-19 12-15-21 14-17-24
2-Way 9-13-20 11-16-23 14-18-25 16-20-28 17-21-30 18-23-32 21-25-36 23-28-39
1-Way 10-16-22 14-18-26 17-20-29 18-22-31 20-24-34 21-26-36 23-29-41 26-31-44
PERFORMANCE NOTES FOR SERIES 7500/7550/7600/7650
DEFINITION OF UNITS
DIFFUSERS
CEILING

CEILING DIFFUSERS
PERFORATED
7600/7650

MODEL
7550R-F/7650R-F
Tag: METAL*AIRE
Series : 7550 7550R-F-7650R- Submittal No:

Model 7550R-F and 7650R-F are perforated return filter diffusers
Perforated Filter Returnin Diffusers
DIFFUSERS
designed to be installed standard T-Bar ceiling grids. The hinged

CEILING
Steel - Square
perforated Neck
face allows access to the filter (by others). These units are
available
Models: with aF 1" orSurface
7550R-1 2" filterMount
rack. - Filter Back
Steel7550R-6 F
construction Lay in T-Bar - Filter Back
7550R-8 F Tegular T-Bar - Filter Back
Hinged face allows access to the filter (by others)
7650R-1 F Surface Mount - Filter Back
7650R-6 F Lay in T-Bar - Filter Back
7650R-8 F Tegular T-Bar - Filter Back
Models: 7550R-1 F ( Surface Mount - Filter Back )

7650R-1 F ( Surface Mount - Filter Back )
CEILING DIFFUSERS
15 15 15 15
2 Concealed 19 16 x 19 16 Or 21 16 x 21 16 Frame
PERFORATED
Hinges
5
1 8
Perforated Face Plate Optional Drop Face

3
8
22 3 x 22 3
4 4
1 3 x 23 3
1 4 Ceiling Opening 23
4 4
3 x 25 3
Overall Diffuser = 25
8 8
Models: 7550R-6 F ( Lay in T-Bar - Filter Back )

7650R-6 F ( Lay in T-Bar - Filter Back )
19 15 x 19 15 OR 21
15 x 21 15
Frame
7550R-F/7650R-F
2 Concealed 16 16 16 16
Hinges 2 Concealed Spring Latches
5
1 8 3
8

22 3 3
4 x 22 4
3 3
Model: 7550R-8 F ( Tegular T-Bar Filter Back )

7650R-8 F ( Tegular T-Bar Filter Back )
2 Concealed 19 15 x 19 15 OR 21
15
x 21
15
Hinges 16 16 16 16 Frame
3
1 8

3
3 3 8
22 4 x 22 4
4 4
Available in Nominal 24 x 24 Ceiling Openings.

20 x 20 or 22 x 22 Nominal Neck Sizes Only.
Accommodates Standard 1" Thick Disposable Air Filters.

CD164 2. Available
Metal Industries, Accessories 3. Construction
Inc. For complete product specifications and submittal

Details
data, visit us at www.metalaire.com
Standard Finish (no extra charge): ( Shipped Unattached ) Available only in listed sizes.
SERIES 7550R-F/7650R-F SPECIFICATIONS
EXHAUST/RETURN Performance Specification

FILTER GRILLES PERFORATED FACE The manufacturer shall provide published performance
7550R-1 F Surface Mounted data. Data shall be tested in accordance to ANSI/
7650R-1 F Surface Mounted
DIFFUSERS
CEILING
7550R-6 F T-bar Lay-in
Paint Specification
7650R-6 F T-bar Lay-in Process shall be anodic electro-deposition using an
7550R-8 F Tegular T-bar anodic acrylic paint. Units shall undergo pre-treatment
7650R-8 F Tegular T-bar including a pressurized spray stage using an alkaline
Air Inlets shall be steel model 7550R-F or 7650R-F cleaner and de-ionized water rinse.
perforated face filter return diffusers manufactured by
METALAIRE. Units shall consist of aluminum 51% free
area perforated face with 3/16" diameter perforated holes
on 1/4" staggered centers. Units shall include a hinged
face and integral frame designed to accept a 1" or 2"
CEILING DIFFUSERS
thick filter. Face shall be secured in place with tension
PERFORATED
spring clips.
ceiling system.
7550R-F/7650R-F

7550RF MODEL NUMBER SPECIFICATION
PERFORATED CEILING DIFFUSER SQUARE NECK
7550R1 F Surface Mount 20 x 20 Standard
24 x 24
7650R1 F Surface Mount 22 x 22 01 White
DIFFUSERS
Optional
CEILING
02 Satin Silver
03 Black
22 Black BP/ White Face
28 Custom Color
Available Options
CEILING DIFFUSERS
2FF 2" Filter Rack

PERFORATED

7550R6 F Tbar Layin 20 x 20 Standard
24 x 24
7650R6 F Tbar Layin 22 x 22 01 White
7550R8 F Tegular Tbar Optional
7650R8 F Tegular Tbar 02 Satin Silver
03 Black
22 Black BP/ White Face
28 Custom Color
7550R-F/7650R-F

Available Options
2FF 2" Filter Rack
SERIES 7550R-F/7650R-F PERFORMANCE DATA
MODEL 7550R-F/7650R-F
Neck Size Ps .008 .015 .020 .030 .050 .060 .080 .080
6x6 CFM 75 100 120 150 175 200 225 250
DIFFUSERS
8x8 CFM 130 175 220 265 310 350 400 445
CEILING
10 x 10 CFM 210 275 345 415 485 555 625 695
12 X 12 CFM 300 400 500 600 700 800 900 1000
14 x 14 CFM 410 545 680 815 950 1090 1225 1360
16 x 16 CFM 530 710 885 1060 1240 1415 1600 1770
22 x 22 CFM 1010 1345 1680 2015 2350 2690 3025 3360
PERFORMANCE NOTES FOR SERIES 7550R-F/7650R-F

CEILING DIFFUSERS
DEFINITION OF UNITS
PERFORATED
Throw Isothermal throw (supply air temperature the same as average room temperature); values are for 150, 100 and 50fpm
velocities
7550R-F/7650R-F

applicationswheremodularairpatternadjustability
isdesired.Theperforatedfaceofthediffuser
allowsformaintainingconsistencyanduniformityin
theceilingappearance.Thecoresarespringloaded
andcanbesnappedintothediffuserframebefore
orafterinstallationwithouttheuseoftoolsand
MODEL 7900
withoutremovingthediffuserfromtheceiling.
Aluminumconstruction
Modularcorescanbefieldadjustedfor1,2,3
Model 7900 is designed for supply air distribution in applications where
and4wayairpatterns
modular air pattern adjustability is desired. The perforated face of the
diffuser allows for maintaining consistency and uniformity in the ceiling
Perforatedfaceissecuredwithspringclipsfor
DIFFUSERS
appearance. The cores are spring loaded and can be snapped into the
easyremovaltoaccessthemodularcorepattern
CEILING
diffuser frame before or after installation without the use of tools and
controllers
without removing the diffuser from the ceiling.
SquareNeck
Modular cores can be field adjusted for 1, 2, 3 and 4-way air patterns
Perforated face is secured with spring clips for easy removal to access the modular core pattern controllers
Square Neck
CEILING DIFFUSERS
PERFORATED
7900
132
SUPPLY PERFORATED MODULAR CORE Round Neck Optional Dampers and Accessories
EXTRUDED ALUMINUM SQUARE
SQUARE TO ROUND TRANSITIONS
NECK 1 TO 4 CORES STEEL
Units to have square to round transitions allowing
7900-1 Surface Mounted
installation with round ductwork.
DIFFUSERS
7900-6 T-bar Lay-in
CEILING
7900-7 Concealed Spline BUTTERFLY DAMPER
7900-8 Tegular T-bar METALAIRE model BDS aluminum round butterfly type
Air Diffusers shall be aluminum model 7900
two butterfly style blades that can be adjusted from
manufactured by METALAIRE. Units shall consist of
full open to full closed. Damper shall be adjusted with
aluminum 51% free area perforated face with 3/16"
a screwdriver slot that can be accessed through the
diameter perforated holes on 1/4" staggered centers.
face of the diffuser.
Outside border of unit shall be constructed from an
aluminum extrusion. RADIAL SHUTTER DAMPER
The perforated face shall be removable allowing access METALAIRE model RSD steel round radial shutter damper
CEILING DIFFUSERS

to the adjustable modular core pattern controllers. shall be provided. Damper shall consist of gang operated
PERFORATED
These are mounted in the neck of the diffuser. radial blades that slide perpendicular to air flow direction.
Steel modular cores are not acceptable. Face shall be The damper shall be adjusted from full open to full closed.
secured in place with tension spring clips. Diffusers Damper shall be adjusted with a screwdriver slot that can
shall be field adjustable allowing 1, 2-way opposite, be accessed through the face of the diffuser.
Units shall be designed to integrate into the specified shall consist of gang operated blades that can be
ceiling system. adjusted from full open to full closed. Damper shall be
Square Neck Options and Accessories
7900
EQUALIZING GRID
METALAIRE model OBDA aluminum and OBD steel METALAIRE model G3 aluminum round equalizing
opposed blade type dampers shall be provided. grid shall be provided. Equalizing grid shall consist
Damper shall consist of gang operated blades that can of 1/2" x 1/2" x 1/2" aluminum cubed core mounting
be adjusted from full open to full closed. Damper shall in an aluminum frame.
be screw slot operated that can be accessed through the
damper of the diffuser. Performance Specification
EQUALIZING GRID The manufacturer shall provide published performance
Paint Specification

PERFORATED MODULAR CORE CEILING DIFFUSER STEEL
Model Available Neck Module Air Pattern Available Finishes
79001 Surface Mount 6x6 12 x 12 Standard
6x6 01 White
DIFFUSERS
8x8 20 x 20 S1-1 Optional

CEILING
10 x 10 24 x 24 S4-4 02 Satin Silver

12 x 12 48 x 24 03 Black
14 x 14 24 Mill
16 x 16 24 x 24 28 Custom Color
18 x 18 48 x 24 S4-4 Available Accessories
20 x 20 24 x 24 OBD Steel Opposed Blade Damper
L9 Square / Rectangular Equalizing Grid
CEILING DIFFUSERS

PERFORATED
7900
PERFORATED MODULAR CORE CEILING DIFFUSER STEEL
7900-6 T-bar Lay-in 6x6 12 x 12 Standard
6x6 01 White
DIFFUSERS
8x8 20 x 20 S1-1 Optional
CEILING
10 x 10 24 x 24 S4-4 02 Satin Silver
12 x 12 48 x 24 03 Black
14 x 14 22 Black BP / White Face
16 x 16 24 x 24 28 Custom Color
18 x 18 48 x 24 S4-4 Available Accessories
20 x 20 24 x 24 OBD Steel Opposed Blade Damper
CEILING DIFFUSERS
PERFORATED
79007 Concealed Spine 6x6 Standard
7900-8 Tegular T-bar 8x8 S1-1 01 White
10 x 10 S4-4 Optional
12 x 12 24 x 24 02 Satin Silver
14 x 14 03 Black
7900
S4-4
18 x 18 28 Custom Color
20 x 20 Available Accessories

MODEL 7900 (4 CORE)
Vn Neck Velocity fpm 200 300 400 500 600 700
Pt .020 .045 .080 .125 .180 .245
Listed Size Side Designation A B A B A B A B A B A B
DIFFUSERS
CFM 50 75 100 125 150 175

CEILING
NC <20 <20 21 27 33 37
4-Way Throw 1-3 1-4 2-6 3-9 4-12 5-14
6x6
3-Way Throw 1-3 2-4 1-4 2-6 2-6 3-8 3-9 4-13 4-12 6-17 5-14 7-20
2-Way Throw 2-4 2-6 3-8 4-13 6-17 7-20
1-Way Throw 2-6 2-8 4-12 6-18 12-24 10-28
CFM 90 130 175 220 265 310
NC <20 <20 25 30 35 40
4-Way Throw 1-3 2-6 3-9 4-12 5-15 6-18
8x8
3-Way Throw 1-3 2-4 2-6 3-8 3-9 4-13 4-12 6-17 5-15 7-21 6-18 8-25
2-Way Throw 2-4 3-8 4-13 6-17 7-21 8-25
1-Way Throw 2-6 4-12 6-18 8-24 10-30 12-36
CEILING DIFFUSERS
CFM 140 205 275 345 415 485

NC <20 <20 26 32 37 42
PERFORATED
4-Way Throw 1-3 2-7 3-9 5-15 7-20 8-23

10 x 10
3-Way Throw 1-3 2-4 2-7 3-10 3-9 4-13 5-15 7-21 7-20 10-28 8-23 11-32
2-Way Throw 2-4 3-10 4-13 7-21 10-28 11-32
1-Way Throw 2-6 4-14 6-18 10-30 14-40 16-46
CFM 200 300 400 500 600 700
NC <20 20 28 35 40 45
4-Way Throw 1-4 2-7 4-11 6-17 8-23 9-26
12 x 12
3-Way Throw 1-4 2-6 2-7 3-10 4-11 6-16 6-17 8-24 8-23 11-32 9-26 13-37
2-Way Throw 2-6 3-10 6-16 8-24 11-32 13-37
1-Way Throw 2-8 4-14 8-22 12-34 16-46 18-52
CFM 270 405 545 680 815 950
NC <20 21 29 36 41 46
7900
4-Way Throw 1-4 3-9 5-15 8-23 10-29 11-33

14 x 14
3-Way Throw 1-4 2-6 3-9 4-13 5-15 7-21 8-23 11-32 10-29 14-41 11-33 16-47
2-Way Throw 2-6 4-13 7-21 11-32 14-41 16-47
1-Way Throw 2-8 6-18 10-30 16-46 20-58 22-66
CFM 355 530 710 885 1070 1245
NC <20 22 30 37 42 46
4-Way Throw 1-5 3-9 5-15 8-24 11-32 12-35
16 x 16
3-Way Throw 1-5 2-7 3-9 4-13 5-15 7-21 8-24 11-34 11-32 16-45 12-35 17-49
2-Way Throw 2-7 4-13 7-21 11-34 16-45 17-49
1-Way Throw 2-10 6-18 10-30 16-48 22-64 24-70
CFM 450 670 900 1120 1345 1570
NC <20 23 31 37 43 47
4-Way Throw 1-6 3-10 5-16 9-27 12-35 13-39
18 x 18
3-Way Throw 1-6 2-8 3-10 4-14 5-16 7-23 9-27 13-38 12-35 17-49 13-39 18-55
2-Way Throw 2-8 4-14 7-23 13-38 17-49 18-55
1-Way Throw 2-11 6-20 10-32 18-54 24-70 26-78
CFM 560 830 1110 1385 1665 1945
NC <20 24 32 38 44 48
4-Way Throw 2-6 3-11 6-18 9-27 12-36 13-39
20 x 20
3-Way Throw 2-6 3-8 3-11 4-16 6-18 8-25 9-27 13-38 12-36 17-51 13-39 18-55
2-Way Throw 3-8 4-16 8-25 13-38 17-51 18-55
1-Way Throw 4-12 6-22 12-36 18-54 24-72 26-78
MODEL 7900 SINGLE CORE
Neck 200 300 400 500 600 700
Single
Outlet Vel 310 460 615 770 925 1080
Core Size
Inches Pt .020 .045 .080 .125 .180 .245
DIFFUSERS
CFM 13 19 25 32 38 44
CEILING
3x3 Throw 1-3 1-4 2-6 3-9 4-12 5-14
NC <20 <20 <20 21 27 31
CFM 22 33 44 56 67 78
4x4 Throw 1-3 2-6 3-9 4-12 5-15 6-18
NC <20 <20 <20 24 29 34
CFM 35 52 70 87 104 122
5x5 Throw 1-3 2-7 3-9 5-15 7-20 8-23
NC <20 <20 20 26 31 36
CEILING DIFFUSERS
CFM 50 75 100 125 150 175
6x6 Throw 2-6 2-8 4-12 6-18 12-24 10-28
PERFORATED
NC <20 <20 21 27 33 37
CFM 68 102 136 170 204 238
7x7 Throw 2-6 3-9 5-15 7-21 10-27 11-33
NC <20 <20 23 28 34 38
CFM 89 133 178 222 267 311
8x8 Throw 2-6 4-12 6-18 8-24 10-30 12-36
NC <20 <20 25 30 35 40
CFM 112 169 225 281 337 393
9x9 Throw 2-6 4-13 6-18 9-27 12-35 14-42
7900
NC <20 <20 25 31 36 41
CFM 139 208 278 347 416 486
10 x 10 Throw 2-6 4-14 6-18 10-30 14-40 16-46
NC <20 <20 26 32 37 42
CFM 168 252 336 420 504 588
11 x 11 Throw 2-7 4-14 7-20 11-27 15-43 17-49
NC <20 <20 27 33 38 43
CFM 200 300 400 500 600 700
12 x 12 Throw 2-8 4-14 8-22 12-24 16-46 18-52
NC <20 20 28 35 40 45

DEFINITION OF UNITS
DIFFUSERS
CEILING

CEILING DIFFUSERS
PERFORATED
7900
MODEL 7950
Model 7950 is designed for supply air distribution in applications where
modular air pattern adjustability is desired. The perforated face of the
diffuser is secured with spring clips which allows for easy removal and
DIFFUSERS
access to the modular cores. The cores are spring loaded and can be
CEILING
snapped into the diffuser frame before or after installation without the
use of tools and without removing the diffuser from the ceiling.
Available in steel or aluminum face with steel backpan
Modular cores can be field adjusted for 1, 2, 3 and 4-way air patterns
Face is secured with spring clips for easy removal to access to the modular core pattern controllers
Square neck
CEILING DIFFUSERS
PERFORATED
7950

SUPPLY DIFFUSERS BUTTERFLY DAMPER

PERFORATED MODULAR CORE METALAIRE model BDS aluminum round butterfly type
SQUARE NECK 4 CORES dampers shall be provided. Damper shall consist of
two butterfly style blades that can be adjusted from full
DIFFUSERS
Steel- Aluminum Face Steel Backpan open to full closed. Damper shall be adjusted with a
CEILING
7950-1 Surface Mounted Steel screwdriver slot that can be accessed through the face
7950-1 AF Surface Mounted Aluminum Face of the diffuser.
7950-1 DF Surface Mounted Dropped Face RADIAL SHUTTER DAMPER
7950-6 T-bar Lay-in Steel METALAIRE model RSD steel round radial shutter damper
7950-6 AF T-bar Lay-in Aluminum Face shall be provided. Damper shall consist of gang operated
7950-8 Tegular T-bar Steel radial blades that slide perpendicular to air flow direction.
7950-8 AF Tegular T-bar Aluminum Face The damper shall be adjusted from full open to full closed.
Air Diffusers shall be steel model 7950 or aluminum Damper shall be adjusted with a screwdriver slot that can
face, steel backpan model 7950-AF manufactured be accessed through the face of the diffuser.
CEILING DIFFUSERS
by METALAIRE. OPPOSED BLADE DAMPER

PERFORATED
Units shall consist of aluminum 51% free area METALAIRE model D3 aluminum or SD3 steel round
perforated face with 3/16" diameter perforated holes opposed blade type dampers shall be provided. Damper
on 1/4" staggered centers. The perforated face shall be shall consist of gang operated blades that can be
hinged allowing access to four adjustable aluminum adjusted from full open to full closed. Damper shall be
modular core pattern controllers. These are mounted adjusted with a screwdriver slot that can be accessed
in the neck of the diffuser. Steel modular cores are not through the face of the diffuser.
acceptable. Face shall be secured in place with tension
spring clips. Diffusers shall be field adjustable allowing EQUALIZING GRID
1, 2-way opposite, 2-way corner, 3, and 4-way directional METALAIRE model G3 aluminum round equalizing grid
air patterns. shall be provided. Equalizing grid shall consist of
The units shall be the size and quantity outlined in the 1/2" x 1/2" x 1/2" aluminum cubed core mounting in
7950
plans and specifications. an aluminum frame.

Units shall be designed to integrate into the specified Performance Specification
ceiling system.
Options and Accessories
METALAIRE model OBDA aluminum or OBD steel round Paint Specification
opposed blade type dampers shall be provided. Damper Process shall be anodic electro-deposition using an
shall consist of gang operated blades that can be anodic acrylic paint. Units shall undergo pre-treatment
adjusted from full open to full closed. Damper shall be including a pressurized spray stage using an alkaline
adjusted with a handle accessible by opening the face of cleaner and de-ionized water rinse.
the diffuser.
EQUALIZING GRID
PERFORATED MODULAR CORE CEILING DIFFUSER
7950-1 Surface Mount Steel 6x6 Standard
7950-1 AF Surface Mount Aluminum Face 8x8 01 White
DIFFUSERS
7950-1 DF Surface Mount Drop face 10 x 10 Optional
CEILING
24 x 24 S4-4
14 x 14 03 Black
28 Custom Color
CEILING DIFFUSERS
PERFORATED
7950-6 T-bar Lay-in 6x6 Standard
7950-6 AF T-bar Lay-in Aluminum Face 8x8 01 White
7950-8 Tegular T-bar 10 x 10 Optional
24 x 24 S4-4
7950-8 AF Tegular T-bar Aluminum Face 12 x 12 02 Satin Silver
14 x 14 03 Black
7950
28 Custom Color

MODEL 7950 (4 CORE)
Vn Neck Velocity fpm 200 300 400 500 600 700
Pt .020 .045 .080 .125 .180 .245
Listed Size Side Designation A B A B A B A B A B A B
DIFFUSERS
CFM 50 75 100 125 150 175

CEILING
NC <20 <20 21 27 33 37
4-Way Throw 1-3 1-4 2-6 3-9 4-12 5-14
6x6
3-Way Throw 1-3 2-4 1-4 2-6 2-6 3-8 3-9 4-13 4-12 6-17 5-14 7-20
2-Way Throw 2-4 2-6 3-8 4-13 6-17 7-20
1-Way Throw 2-6 2-8 4-12 6-18 12-24 10-28
CFM 90 130 175 220 265 310
NC <20 <20 25 30 35 40
4-Way Throw 1-3 2-6 3-9 4-12 5-15 6-18
8x8
3-Way Throw 1-3 2-4 2-6 3-8 3-9 4-13 4-12 6-17 5-15 7-21 6-18 8-25
2-Way Throw 2-4 3-8 4-13 6-17 7-21 8-25
1-Way Throw 2-6 4-12 6-18 8-24 10-30 12-36
CEILING DIFFUSERS
CFM 140 205 275 345 415 485

NC <20 <20 26 32 37 42
PERFORATED
4-Way Throw 1-3 2-7 3-9 5-15 7-20 8-23

10 x 10
3-Way Throw 1-3 2-4 2-7 3-10 3-9 4-13 5-15 7-21 7-20 10-28 8-23 11-32
2-Way Throw 2-4 3-10 4-13 7-21 10-28 11-32
1-Way Throw 2-6 4-14 6-18 10-30 14-40 16-46
CFM 200 300 400 500 600 700
NC <20 20 28 35 40 45
4-Way Throw 1-4 2-7 4-11 6-17 8-23 9-26
12 x 12
3-Way Throw 1-4 2-6 2-7 3-10 4-11 6-16 6-17 8-24 8-23 11-32 9-26 13-37
2-Way Throw 2-6 3-10 6-16 8-24 11-32 13-37
1-Way Throw 2-8 4-14 8-22 12-34 16-46 18-52
CFM 270 405 545 680 815 950
NC <20 21 29 36 41 46
7950
4-Way Throw 1-4 3-9 5-15 8-23 10-29 11-33

14 x 14
3-Way Throw 1-4 2-6 3-9 4-13 5-15 7-21 8-23 11-32 10-29 14-41 11-33 16-47
2-Way Throw 2-6 4-13 7-21 11-32 14-41 16-47
1-Way Throw 2-8 6-18 10-30 16-46 20-58 22-66
CFM 355 530 710 885 1070 1245
NC <20 22 30 37 42 46
4-Way Throw 1-5 3-9 5-15 8-24 11-32 12-35
16 x 16
3-Way Throw 1-5 2-7 3-9 4-13 5-15 7-21 8-24 11-34 11-32 16-45 12-35 17-49
2-Way Throw 2-7 4-13 7-21 11-34 16-45 17-49
1-Way Throw 2-10 6-18 10-30 16-48 22-64 24-70
CFM 450 670 900 1120 1345 1570
NC <20 23 31 37 43 47
4-Way Throw 1-6 3-10 5-16 9-27 12-35 13-39
18 x 18
3-Way Throw 1-6 2-8 3-10 4-14 5-16 7-23 9-27 13-38 12-35 17-49 13-39 18-55
2-Way Throw 2-8 4-14 7-23 13-38 17-49 18-55
1-Way Throw 2-11 6-20 10-32 18-54 24-70 26-78
CFM 560 830 1110 1385 1665 1945
NC <20 24 32 38 44 48
4-Way Throw 2-6 3-11 6-18 9-27 12-36 13-39
20 x 20
3-Way Throw 2-6 3-8 3-11 4-16 6-18 8-25 9-27 13-38 12-36 17-51 13-39 18-55
2-Way Throw 3-8 4-16 8-25 13-38 17-51 18-55
1-Way Throw 4-12 6-22 12-36 18-54 24-72 26-78
MODEL 7950 (SINGLE CORE)
Neck 200 300 400 500 600 700
Single
Outlet Vel 310 460 615 770 925 1080
Core Size
Inches Pt .020 .045 .080 .125 .180 .245
DIFFUSERS
CFM 13 19 25 32 38 44
CEILING
3x3 Throw 1-3 1-4 2-6 3-9 4-12 5-14
NC <20 <20 <20 21 27 31
CFM 22 33 44 56 67 78
4x4 Throw 1-3 2-6 3-9 4-12 5-15 6-18
NC <20 <20 <20 24 29 34
CFM 35 52 70 87 104 122
5x5 Throw 1-3 2-7 3-9 5-15 7-20 8-23
NC <20 <20 20 26 31 36
CEILING DIFFUSERS
CFM 50 75 100 125 150 175
6x6 Throw 2-6 2-8 4-12 6-18 12-24 10-28
PERFORATED
NC <20 <20 21 27 33 37
CFM 68 102 136 170 204 238
7x7 Throw 2-6 3-9 5-15 7-21 10-27 11-33
NC <20 <20 23 28 34 38
CFM 89 133 178 222 267 311
8x8 Throw 2-6 4-12 6-18 8-24 10-30 12-36
NC <20 <20 25 30 35 40
CFM 112 169 225 281 337 393
9x9 Throw 2-6 4-13 6-18 9-27 12-35 14-42
7950
NC <20 <20 25 31 36 41
CFM 139 208 278 347 416 486
10 x 10 Throw 2-6 4-14 6-18 10-30 14-40 16-46
NC <20 <20 26 32 37 42
CFM 168 252 336 420 504 588
11 x 11 Throw 2-7 4-14 7-20 11-27 15-43 17-49
NC <20 <20 27 33 38 43
CFM 200 300 400 500 600 700
12 x 12 Throw 2-8 4-14 8-22 12-24 16-46 18-52
NC <20 20 28 35 40 45

DEFINITION OF UNITS
DIFFUSERS
CEILING

CEILING DIFFUSERS
PERFORATED
7950
ROUND CEILING DIFFUSERS
MODEL 900 MODEL 3000
DIFFUSERS
CEILING
MODEL 3100
CEILING DIFFUSERS
ROUND
MODEL 3200 MODEL R5750
Model 900 is an economical high performance diffuser of aluminum

PAGE 182
construction and has a 360 air pattern.
Model 3000 is a high induction, high capacity 3 cone adjustable diffuser.

It is fully adjustable from horizontal to vertical discharge and is aluminum PAGE 185
construction.
Model 3100 is a high induction, high capacity 2 cone diffuser. It is available

in both aluminum and steel construction. The 3100A can be adjusted for PAGE 189
vertical or horizontal discharge.
Model 3200 is an excellent choice for high capacity applications such as

factories, gymnasiums, theaters, and convention halls. It can effectively be PAGE 194
applied for either spot heating or cooling
Model R5750 is an architecturally pleasing round diffuser that blends well

into the ceiling surface. It is available in all aluminum, aluminum face with PAGE 199
steel backpan and steel construction.

MODEL 900
Model 900 is an economical high performance diffuser of
aluminum construction.
360 air pattern
*AIRE
METAL

DIFFUSERS
Tag:rings for even air distribution

Concentric
CEILING
Series
Mounting holes in: outer ring 900 Submittal No: 900
Optional
Fixed Round
damper ModelDiffusers
900D
Aluminum - Multi Cone
Diffuser allows for damper control via the face with factory provided operator
Models: 900 Fixed Pattern
900D Fixed Pattern with Round Damper
Model: 900 ( Fixed Pattern )

X
Y
CEILING DIFFUSERS
ROUND
Gasket
Z
Diffuser Cone
Mounting Screw Damper Operator Outer Mounting Cone
(3 Per Unit) Guide Hole
Model: 900 D ( Fixed Pattern with Round Damper )

X
Y
900
Number 900
A
Gasket
Submittal
Mounting Screw
Diffuser Cone
Damper Operator Outer Mounting Cone
(Turn to Open or Close)
Number of
Diffuser Number Damper
Diffuser Size X X YY ZZ Cones Damper Size AA
Size of Cones Size
6 10 1/8 5 13/16 1 7/8 4 6 3
6 10 1/8 5 13/16 1 7/8 4 6 3
8 8 12 12
1/8 1/8 77 13/16
13/16 2 13/16
2 3/16 5 5 8
8 44
10 10 14 14
1/8 1/8 99 13/16
13/16 2 1/2
2 1/2 6 6 10
10 55
12 16 1/8 11 12
12 16 1/8 11 13/16
13/16 2 13/16
2 13/16 7 7 12 6
6
14 18 1/8 13 13/16 3 1/8 8 14 6 1/4
14 18 1/8 13 13/16 3 1/8 8 14 6 1/4

CD182 1. Available Finishes 2. Available Accessories
Metal Industries, 4. Construction
Inc. For complete product specifications
Details
and submittal data, visit us at www.metalaire.com
Standard Finish: 900D Round Damper. Sizes as listed.
01 White. Replacement Knobs.
Air Diffusers shall be model: Optional Accessories

Air Diffusers shall be Model 900 manufactured by 900 SERIES DAMPER
METALAIRE. Diffuser shall have a series of uniformly
Diffusers shall be installed with a neck-mounted damper,
spaced concentric round cones. Units shall be aluminum
DIFFUSERS
model 900D, manufactured by METALAIRE. Damper shall
construction. The units shall be the size and quantity as
CEILING
be of aluminum construction and designed to give jam-
free operation. Sizes 6" 12" round dampers shall be 2
Units cone shall drop down and provide an efficient blades, butterfly type. Size 14" damper shall be an 8 blade
horizontal radial discharge pattern. Diffuser shall opposed blade damper. Units shall include a damper
include countersunk screw holes for installation into operator knob constructed of high impact nylon. Damper
the ceiling system. Center cone of diffuser shall include knob shall be removable to prevent tampering after the
an access hole to allow face adjustment of an optional diffuser is balanced.
damper operator.
CEILING DIFFUSERS
ROUND
Paint Specification
clear and de-ionized water rinse.

FIXED ROUND DIFFUSER MULTI CORE
900
Model Available Neck Available Finishes
Model 900-1 Surface Mount 6 Standard
8 01 White
10 Optional
12 02 Satin Silver
14 03 Black
28 Custom Color
900D Aluminum Butterfly Damper
EK Extra Knob

MODEL 900
fpm 200 300 400 500 600 700 800 900 1000
Neck
Size Pt 0 0.01 0.02 0.03 0.035 0.05 0.065 0.08 0.1
CFM 37 55 75 90 110 130 145 165 185
DIFFUSERS
6 Throw 3-5 3-5 3-6 3-6 4-6 4-6 4-6 5-7 5-7
CEILING
NC - - - - 20 23 25 25 30
CFM 65 100 135 165 200 230 265 300 330
8 Throw 4-6 4-6 4-6 5-7 5-8 5-8 5-8 5-9 6-10
NC - - - 20 25 25 28 30 35
CFM 105 160 210 265 315 370 420 475 525
10 Throw 4-7 5-8 5-9 5-10 6-11 6-12 7-13 7-14 7-14
NC - - - 20 25 30 30 35 35
CFM 150 230 305 380 455 535 610 685 760
CEILING DIFFUSERS
12 Throw 5-8 5-9 6-10 6-11 6-12 7-13 7-14 6-16 10-18
NC - - 20 25 25 30 30 35 35
CFM 200 310 415 520 625 730 830 935 1040
ROUND
14 Throw 6-9 7-11 8-13 9-14 11-15 12-17 13-19 15-21 18-23
NC - - 20 25 30 30 35 35 40

DEFINITION OF UNITS
Throw Throw distance in feet at terminal velocities of 150-100fpm with a supply air temperature 20F cooler
900
than room temperature


MODEL 3000
Model 3000 is an adjustable 3 Cone round diffuser that incorporates
a high induction design to efficiently handle large volumes of air. It is
full adjustable from horizontal to vertical projection for spot heating or
DIFFUSERS
cooling applications.
CEILING
High induction capacity with 3 cones
Submittal: 3000
Fully adjustable from horizontal to vertical discharge
Adjustable Round Diffusers
Low profile
Aluminum - 3flush
Coneface, or dropped face designs are available
Models: 3000-1 Flush Cone
3000-2 Drop Cone
Model: 3000-1 ( Flush Cone )

Overall Dia. C
Ceiling Opening B
3 Neck Dia. A Mounting

4 Hole
CEILING DIFFUSERS
Outer
Mounting
Cone F
E
ROUND
D (Full Open) Horizontal Gasket
Air Pattern Ceiling Line No. 3 Cone
No. 2 Cone
Damper Access Hole
No. 1 Cone
Model: 3000-2 ( Drop Cone )
Overall Dia. H
Ceiling Opening G
3 Neck Dia. A Mounting Hole

4
3000
J
Gasket
I (Full Open)
Horizontal
Air Pattern Outer Mounting Cone
Ceiling Line
No. 3 Cone
No. 2 Cone
Damper Access Hole
No. 1 Cone
Size Neck A B C D E F G H I J
Size
Designation Neck
Size
Designation
3006 Size
6 5 7/8 A 12 B 13 7/8 C 2 1/4 D 1 3/4 E3 F7 G
16 1/4 H
3 7/8 2 5/8 I J
3008 8 7 7/8 16 18 5/8 2 5/8 2 3 5/8 9 21 4 3/4 3 5/8
3006
3010 10
6 5 7/8
9 7/8 20
12 22 1/813 7/83 2 1/42 5/8 1 3/43 3/4 3 11 7
26 3/8
165 9/16
1/4 347/8 2 5/8
3012 12 11 7/8 24 27 3 1/2 4 3/8 5 13 31 1/2 6 3/4 4 5/8
3008 8 7 7/8 16 18 5/8 2 5/8 2 3 5/8 9 21 4 3/4 3 5/8
3014 14 13 7/8 28 31 1/4 4 1/4 4 7/16 5 5/8 15 36 7/8 8 5 1/4
3010
3016 1610 `9 7/8 32 20 36 1/222 1/84 3/4 3
15 7/8 4 1/2 2 5/86 1/8 3 3/4
17 11
42 268 7/8
3/8 5 9/16
6 4
3018 18 17 7/8 36 41 3/8 5 4 5/8 6 3/4 19 47 5/8 9 7/8 6 5/8
3012
3020 2012 1 7/8
19 7/8 40 24 42 1/4 27 5 3/8 3 1/25 1/2 4 3/87 1/2 5 21 13
52 3/8 31101/2
3/4 67 1/4
3/4 4 5/8
3024 24 23 7/8 40 44 1/4 5 3/8 5 1/2 7 1/2 25 52 3/8 10 3/4 7 1/4
3014 14 13 7/8 28 31 1/4 4 1/4 4 7/16 5 5/8 15 36 7/8 8 5 1/4
3016 16 15 7/8 32 36 1/2 4 3/4 4 1/2 `6 1/8 17 42 8 7/8 6
Revision: B 3018 11/2013

Date: 18 17 7/8 36 41 3/8 5 4 Dimensions
5/8 6 3/4 are 19 47 5/8 Page:
in Inches 9 7/8 16 of
5/82
3020 20 19 7/8 40 45 1/4 5 3/8 5 1/2 7 1/2 21 52 3/8 10 3/4 7 1/4
3024 24 23 7/8 40 45 1/4 5 3/8 5 1/2 7 1/2 25 52 3/8 10 3/4 7 1/4

Air Diffusers shall be Model 3000 manufactured by Performance Specification

METALAIRE. Diffuser shall be constructed of 3 round The manufacturer shall provide published performance
inner cones and a round outer frame. Diffuser shall data. Data shall be tested in accordance to ANSI/
be adjustable to allow the discharge pattern to be set ASHRAE Standard 70-2006.
DIFFUSERS
from full horizontal to vertical. Units shall be aluminum

CEILING
construction. The units shall be the size and quantity as Paint Specification
outlined in the plans and specifications. Process shall be anodic electro-deposition using an
Pattern adjustment shall be accomplished by rotating anodic acrylic paint. Units shall undergo pre-treatment
the innermost cone. The inner core assembly shall including a pressurized spray stage using an alkaline
be removable for installation and for access into the cleaner and a de-ionized water rinse.
ductwork. The center cone shall include an access hole
to allow adjustment of an optional damper.
MODEL 3000-1 FLUSH FRAME
Diffuser shall have an outer frame that allows flush
CEILING DIFFUSERS
mounting to the ceiling opening.
MODEL 3000-2 DROP FRAME

ROUND
Diffuser shall have a dropped outer frame to move the

discharge jet away from the ceiling surface. Dropped
frame shall minimize ceiling smudging.

ADJUSTABLE ROUND DIFFUSER 3 CONE
MODEL 3000 ALUMINUM
3000

Model 3000-1 Surface Mount 6 Standard
Model 3000-2 Drop Face 8 01 White
10 Optional
12 02 Satin Silver
14 03 Black
16 24 Mill
18 28 Custom Color
24 D3 Aluminum Radial Damper
SD3 Steel Radial Damper
G3 Round Equalizing Grid
GD3 Combo Grid / Damper
Available Options
SC Safety Chain
MODEL 3000
fpm Neck
Vel 400 500 600 700 800 900 1000 1200 1400 1600
Pv 0.01 0.016 0.023 0.031 0.04 0.051 0.063 0.09 0.122 0.16
Ps Horiz. 0.011 0.018 0.026 0.035 0.046 0.059 0.072 0.105 0.145 0.19
DIFFUSERS
Neck
CEILING
Size Ps Vert. 0.019 0.03 0.043 0.058 0.075 0.096 0.115 0.17 0.225 0.3
CFM 80 100 110 140 160 180 200 240 280 320
6 Throw 1-3 2-4 2-5 3-6 3-7 3-8 4-8 4-9 5-10 6-12
NC - - - 20 24 27 36 36 39 44
CFM 140 175 210 245 280 315 350 420 490 560
8 Throw 2-4 2-5 3-6 3-7 4-8 4-10 5-11 5-13 6-14 7-16
NC - - - 20 24 27 31 36 39 44
CFM 220 270 330 380 435 490 545 655 765 870
10 Throw 2-5 3-6 3-7 4-8 5-10 6-11 6-12 7-14 8-18 9-21
CEILING DIFFUSERS
NC - - - 21 25 28 32 37 40 45
CFM 315 390 470 550 630 710 785 940 1100 1260
ROUND
12 Throw 3-7 3-8 4-10 5-11 6-13 7-15 8-17 9-19 10-21 12-25
NC - - 20 22 26 29 33 38 41 46
CFM 425 535 640 750 855 965 1070 1285 1500 1710
14 Throw 3-8 4-9 5-11 6-13 7-16 8-18 9-20 11-13 13-26 15-30
NC - - 20 23 27 31 34 40 43 48
CFM 560 700 840 980 1120 1260 1400 1680 1960 2240
16 Throw 4-9 5-10 5-13 6-15 7-17 9-21 10-23 12-27 14-30 16-35
NC - - 21 24 28 33 36 41 44 49
CFM 710 885 1060 1240 1420 1595 1770 2120 2480 2830
3000
18 Throw 4-10 5-12 6-15 7-17 9-21 11-23 13-26 15-31 16-34 18-38
NC - - 21 25 29 34 37 42 45 51
CFM 875 1090 1310 1525 1745 1965 2180 2620 3060 3490
20 Throw 4-11 6-14 7-16 8-19 9-23 17-23 13-28 15-33 18-38 20-42
NC - 20 22 26 30 36 39 44 47 53
CFM 1255 1570 1885 2200 2510 2825 3140 3770 4395 5025
24 Throw 12-24 13-26 14-28 15-30 16-33 17-35 18-37 20-40 23-45 25-50
NC 22 26 28 31 35 38 41 47 51 55

DEFINITION OF UNITS
1 Tabulated radial throw in feet is based on a 9' ceiling height, ambient supply air, MAX Throw @ Vt = 75fpm,
MIN Throw @ Vt = 150fpm, and the diffuser inner cones in down position for 360 horizontal air distribution pattern.
2 For vertical down protection air pattern with cooling supply air temperature 20 below room temperature
DIFFUSERS
and diffuser inner cones in up position: multiply the tabulated radial throw values by a factor of 0.80 to obtain
CEILING
vertical down projection distances at MIN and MAX (Vt) terminal velocities.
3 For vertical down projection air pattern with heating supply air temperatures 20 above room temperature and diffuser
inner cones in up position: multiply the tabulated radial throw values by a factor of 0.60 to obtain vertical down
projection distances at MIN and MAX (Vt) terminal velocities.
4 Velocity Pressure (Pv) and Static Pressure (Ps) are in inches of water.
5 Series 3000 Diffusers are tested in accordance with ASHRAE 70-2006. Sound data are calculated in accordance
with International Standard ISO 3741 comparison method. The NC values are based on a room absorption
of 10dB for sound power level (lw) re: 10-12 watts - symbol indicates NC less than 20.
6 All data is applicable for exposed for exposed duct mounting or ceiling installation.
CEILING DIFFUSERS
ROUND
3000
MODEL 3100
Model 3100 Round Fixed and Adjustable Diffusers incorporate a high
induction design to efficiently handle large volumes of air. They are fully
Submittal:
adjustable from horizontal to vertical projection for spot heating or 3100
DIFFUSERS
cooling applications. Center cores are removable and interchangeable.
Fixed / Adjustable Round Diffusers
CEILING
High induction
Aluminum / Steel- 2 Cone
/ capacity 2 cone diffuser
Can be3100-1
Models: Aluminum
adjusted for vertical -Fixed Flush
or horizontal Cone
discharge
3100A-1 Aluminum Adjustable Flush Cone
Available 3100 aluminum
3100-2 construction
Aluminum FixedorDrop
3100S steel construction
Cone
3100A-2 Aluminum Adjustable Drop Cone
Lower profile flush face, or dropped face designs are available
3100-1 S Steel - Fixed Flush Cone
3100A-1
30" and 36" unitsS are available
Steel - Adjustable Flush Cone
in non-adjustable models only
3100-2 S Steel - Fixed - Drop Cone
3100A-2 S Steel - Adjustable Drop Cone
Models: 3100-1 & 3100-1 S ( Fixed - Flush Cone )

Frame -1 Sizes
CEILING DIFFUSERS
Nominal Ceiling Opening D
Outer Neck Diameter A Dimensions (Inches)
Cone Size A B C D E F G
E 6 5 3/4 16-1/8 2 3/4 12 1 5/8 3/4
ROUND
C 8 7 3/4 16-1/8 2 3/4 12 1 5/8 3/4
10 9 3/4 21-7/8 3 1/8 17 1 3/4 3/4
F 12 11 3/4 21-7/8 3 1/8 17 1 3/4 3/4
No. 2 Cone No. 1 Cone 14 13 3/4 28-3/4 3 7/8 23 1 3/4 3/4
Overall Diameter B 16 15 3/4 28-3/4 3 7/8 23 1 3/4 1 9/16
18 17 3/4 34-3/8 5 28 1 3/4 1 9/16
Models: 3100A-1 & 3100A-1 S ( Adjustable - Flush Cone ) 20 19 3/4 34-3/8 5 28 1 3/4 1 9/16
24 23 3/4 40-3/8 5 1/2 34 1 3/4 1 9/16
Nominal Ceiling Opening D
Neck Diameter A
Outer G 3100-1 Only
Cone Dimensions (Inches)
E
Size A B C D E F
C 30 29 3/4 49-3/8 7 3/8 41 2 1
3100
36 35 3/4 58-1/8 8 3/8 50 2 1
No. 2 Cone No. 1 Cone F

Closed Position
Overall Diameter B
Models: 3100-2 & 3100-2 S ( Fixed - Drop Cone ) Frame -2 Sizes

Outer Neck Diameter A Dimensions (Inches)
Dimensions (Inches)
Cone Size A B H
Size A C G
B C D
6 5 3/4 16-1/8 2 3/4 3/4 1 7/8
C 8 7 3/46 16-1/85 3/4
2 3/4 16-1/8
3/4 1 7/82 3/4 12
H 10 9 3/4 21-7/8 3 1/8 3/4 2 1/4
8 7 3/4 16-1/8 2 3/4 12
12 11 3/4 21-7/8 3 1/8 3/4 2 1/4
No. 2 Cone No. 1 Cone 14 13 3/4
10 3 7/8
28-3/49 3/4 3/4
21-7/8 3 3/43 1/8 17
Overall Diameter B 16 15 3/4 28-3/4 3 7/8 1 9/16 3 3/4
18 12
17 3/4 34-3/811 3/4
5 121-7/8
9/16 4 3 1/8 17
20 19 3/4
14 34-3/813 3/4
5 128-3/4
9/16 4 3 7/8 23
Models: 3100A-2 & 3100A-2 S ( Adjustable - Drop Cone )
24 23 3/4 40-3/8 5 1/2 1 9/16 4 1/4
Neck Diameter A 16 15 3/4 28-3/4 3 7/8 23
Outer G
Cone 3100-2 Only 18 17 3/4 34-3/8 5 28
Dimensions (Inches)
Size A
20 B
19 3/4C 34-3/8
H
5 28
C
H 30 29 3/4 49-3/823 3/4
7 3/8 5 1/8
24 40-3/8 5 1/2 34
36 35 3/4 58-1/8 8 3/8 6 1/8
No. 2 Cone No. 1 Cone 30 29 3/4 49-1/2 6 1/2 41
Closed Position 36 35 3/4 57-1/8 7 1/2 50
Overall Diameter B
Revision: C Date: 11/2013 Dimensions are in Inches Page: 1 of 2

2013 Metal Industries, Inc. Metal Industries, Inc. Clearwater, FL (727) 441 - 2651 Fax (800) 865 8383 www.metalaire.com [email protected] CD189
FIXED ROUND DIFFUSER FLUSH FRAME

2 FRAME/SERIES 3100 Model 3100A-1 Aluminum
Air diffusers shall be Model 3100 (aluminum) or Model 3100SA-1 Steel
3100-S (steel) manufactured by METALAIRE. Diffuser Diffuser shall have an outer frame that allows
DIFFUSERS

shall be constructed of 2 round inner cone assemblies
CEILING
flush mounting to the ceiling opening.

and a round outer frame. Diffuser shall have a fixed
horizontal pattern. Units shall be aluminum construction DROP FRAME
(Model 3100) or steel construction (Model 3100S). Model 3100A-2 Aluminum
The units shall be the size and quantity as outlined in Model 3100A-S-2 Steel
the plans and specifications. Diffuser shall have a dropped outer frame to move the
The inner core assembly shall be removable for discharge jet away from the ceiling surface. Dropped
installation and for access into the ductwork. The center frame shall minimize ceiling smudging.
cone shall include an access hole to allow adjustment of
an optional damper. Performance Specification
CEILING DIFFUSERS

FLUSH FRAME
Model 3100-1 Aluminum ASHRAE Standard 70-2006.
ROUND
Model 3100S-1 Steel

Diffuser shall have an outer frame that allows flush Paint Specification
mounting to the ceiling opening. Process shall be anodic electro-deposition using an
anodic acrylic paint. Units shall undergo pe-treatment
DROP FRAME
Model 3100-2 Aluminum cleaner and a de-ionized water rinse.
Model 3100-S-2 Steel
Diffuser shall have a dropped outer frame to move
the discharge jet away from the ceiling surface.
Dropped frame shall minimize ceiling smudging.
3100
ADJUSTABLE ROUND DIFFUSER

2 FRAME
Air diffusers shall be Model 3100A (aluminum) or
3100A-S (steel) manufactured by METALAIRE. Diffuser
shall be constructed of 2 round inner cones assembly
and a round outer frame. Diffuser shall be adjustable
to allow the discharge pattern to be set from full
horizontal to vertical. Units shall be aluminum
construction (Model 3100) or steel construction (Model
3100S). The units shall be the size and quantity as
Pattern adjustment shall be accomplished by rotating
the innermost frame. The inner core assembly shall
be removable for installation and for access into the
ductwork. The center cone shall include an access hole
to allow adjustment of an optional damper.
FIXED/ADJUSTABLE ROUND DIFFUSER 2 CONE
MODEL 3100 ALUMINUM
3100-1 Fixed Surface Mount 6 Standard
DIFFUSERS
3100A-1 Adjustable Surface Mount 8 01 White
CEILING
3100-2 Fixed Beveled Drop Face 10 Optional
3100A-2 Adjustable Beveled Drop Face 12 02 Satin Silver
14 03 Black
16 28 Custom Color
24 SD3 Steel Radial Damper
CEILING DIFFUSERS
ROUND
Available Options
SC Safety Chain

FIXED/ADJUSTABLE ROUND DIFFUSER 2 CONE
MODEL 3100S STEEL
3100
3100S-1 Fixed Surface Mount 6 Standard
3100SA-1 Adjustable Surface Mount 8 01 White
3100S-2 Fixed Beveled Drop Face 10 Optional
3100SA-2 Adjustable Beveled Drop Face 12 02 Satin Silver
14 03 Black
16 28 Custom Color
24 SD3 Steel Radial Damper
Available Options
SC Safety Chain

MODELS 3100 3100S
fpm Neck
Vel 400 500 600 700 800 900 1000 1200 1400 1600
Pv 0.01 0.016 0.023 0.031 0.04 0.051 0.063 0.09 0.122 0.16
Ps Horiz. 0.025 0.039 0.056 0.076 0.1 0.126 0.156 0.225 0.304 0.398
DIFFUSERS
Neck
CEILING
Size Ps Vert. 0.049 0.076 0.109 0.149 0.194 0.247 0.305 0.44 0.594 0.777
CFM 75 .94 113 132 151 169 188 226 264 301
6 Throw 2-3-6 3-4-8 3-5-9 4-5-11 4-6-12 5-7-14 5-8-16 6-9-19 7-11-22 9-13-26
NC - - - - - 23 26 32 36 40
CFM 135 169 203 237 271 304 338 406 474 541
8 Throw 3-5-9 3-5-10 4-6-12 4-7-13 5-8-15 6-9-17 7-10-20 8-12-25 10-14-29 10-15-30
NC - - - 20 24 28 31 37 42 46
CFM 213 266 319 372 425 479 532 638 745 851
10 Throw 4-16-12 4-7-13 5-7-15 5-8-17 6-9-18 7-10-20 7-111-23 9-14-27 11-16-32 12-18-36
CEILING DIFFUSERS
NC - 20 23 26 29 31 34 40 45 49
CFM 308 385 461 538 615 692 769 923 1077 1231
ROUND
12 Throw 5-7-15 5-8-16 6-9-18 7-10-20 7-11-22 8-12-24 9-13-26 11-16-32 12-19-37 14-21-43
NC - 22 25 28 31 34 37 42 47 51
CFM 420 525 630 735 840 945 1050 1260 1470 1680
14 Throw 6-9-18 6-10-19 7-11-21 8-12-23 8-13-25 9-14-28 10-15-30 12-18-36 14-21-43 17-25-57
NC 22 25 28 31 34 37 39 44 48 52
CFM 550 687 825 962 1100 1237 1375 1649 1924 2194
16 Throw 7-10-21 7-11-22 8-12-25 9-14-27 10-15-30 11-17-33 12-18-37 14-22-43 17-25-50 19-29-57
NC 24 27 30 32 35 38 40 45 50 54
CFM 697 871 1046 1220 1394 1568 1743 2091 2440 2788
3100
18 Throw 8-12-24 9-13-27 10-15-32 11-16-32 12-17-35 13-19-38 14-20-43 16-24-48 18-28-55 21-32-64
NC 25 28 31 33 36 39 41 45 50 54
CFM 862 1077 1293 1508 1724 1939 2154 2585 3016 3447
20 Throw 9-13-27 10-15-30 11-16-32 12-18-36 13-20-39 14-22-43 16-24-47 19-28-56 22-33-65 24-36-72
NC 27 30 32 35 37 39 41 45 50 54
CFM 1224 1554 1885 2176 2487 2798 3109 3731 4353 4974
24 Throw 12-18-36 13-20-40 15-22-45 16-25-49 18-27-54 20-30-59 21-32-64 25-37-75 28-42-84 31-47-93
NC 28 31 33 36 38 40 42 46 50 54
CFM 1947 2434 2921 3408 3894 4381 4868 5842 6815 7789
30 Throw 17-26-51 19-29-54 27-32-64 24-35-71 26-39-78 28-42-85 31-46-92 35-53-105 39-58-117 42-63-126
NC 30 32 35 37 39 41 43 47 51 54
CFM 2808 3510 4212 4914 5616 6318 7020 8423 9827 11231
36 Throw 24-36-72 27-40-81 30-45-90 33-49-99 36-54-108 39-59-118 42-63-127 48-72-144 53-79-158 58-84-168
NC 31 33 36 38 40 42 44 48 57 54
DEFINITION OF UNITS
1 Tabulated radial throw in feet is based on a 9' ceiling height, ambient supply air, MAX Throw @ Vt = 75 fpm,
MIN Throw @ Vt = 150fpm, and the diffuser inner cones in down position for 360 horizontal air distribution pattern.
2 For vertical down protection air pattern with cooling supply air temperature 20 below room temperature and diffuser inner
DIFFUSERS
cones in up position: multiply the tabulated radial throw values by a factor of 0.80 to obtain vertical down projection
CEILING
distances at MIN and MAX (Vt) terminal velocities.
3 For vertical down projection air pattern with heating supply air temperatures 20 above room temperature and diffuser inner
cones in up position: multiply the tabulated radial throw values by a factor of 0.60 to obtain vertical down projection
distances at MIN and MAX (Vt) terminal velocities.
4 Velocity Pressure (Pv) and Static Pressure (Ps) are in inches of water.
5 Series 3000 Diffusers are tested in accordance with ASHRAE 70-2006. Sound data are calculated in accordance with
International Standard ISO 3741 comparison method. The NC values are based on a room absorption of 10dB for sound
power level (lw) re: 10-12 watts - symbol indicates NC less than 20.
6 All data is applicable for exposed for exposed duct mounting or ceiling installation.
CEILING DIFFUSERS
ROUND
3100

MODEL 3200
Model 3200 is a heavy duty round cone ceiling diffuser featuring a wide
range of pattern adjustments. At the full vertical setting it provides
a downward projection for effective heating and cooling from high
DIFFUSERS
mounting locations. It is an excellent choice for gymnasiums, factories,

CEILING
theaters and convention halls.

Can effectively be applied for either spot heating or cooling
In the horizontal setting the unit provides tight ceiling patterns
Outer cone design guards against ceiling smudging when in horizontal position
Inner core assembly is removable for ease of installation and access to the ductwork
CEILING DIFFUSERS
ROUND
3200
Dimensions
Size A B C D E F
6 5 3/4 17 1/4 2 1/8 6 3/4 1 1/8 1 1/8
8 7 3/4 17 1/4 2 1/8 8 3/4 1 1/8 1 1/4
10 9 3/4 20 1/4 2 5/8 10 3/4 1 1/4 1 3/4
12 11 3/4 22 1/4 2 5/8 12 3/4 1 1/4 1 3/4
14 13 3/4 29 1/2 2 5/8 14 3/4 1 1/4 2 3/8
16 15 3/4 29 1/2 2 3/4 16 3/4 1 1/4 2 3/8
18 17 3/4 33 1/2 3 5/8 18 3/4 1 1/4 2 1/2
20 19 3/4 36 3/4 3 5/8 20 3/4 1 2 1/2
24 23 3/4 40 3/4 3 5/8 24 3/4 1 2 1/2
Air diffusers shall be Model 3200 manufactured by Performance Specification

METALAIRE. Diffusers shall be constructed of an opposed The manufacturer shall provide published performance
blade damper inner assembly mounted in data. Data shall be tested in accordance to ANSI/
an inner ring. Diffusers shall allow the adjustment ASHRAE Standard 70-2006.
DIFFUSERS
of the discharge pattern from full horizontal to full
CEILING
vertical and be adjustable from the face by turning Paint Specification
an operator ring. Units shall be steel construction. Process shall be anodic electro-deposition using an
The units shall be the size and quantity as outlined in anodic acrylic paint. Units shall undergo pre-treatment
the plans and specifications. including a pressurized spray stage using an alkaline
Pattern adjustment operator shall open the inner opposed cleaner and de-ionized water rinse.
blade damper assembly to discharge the air in a vertical
pattern or close the damper to allow a tight horizontal
pattern. In the horizontal setting, core shall project
discharge pattern to minimize ceiling smudging. The
inner core assembly shall be removable for installation
CEILING DIFFUSERS
and for access into the ductwork.
ROUND
ADJUSTABLE ROUND DIFFUSER
W/FACE ACCESSIBLE OPERATING RING AND CENTER OBD
3200-1 Adjustable Surface Mount 6 Standard
8 01 White
10 Optional
3200
12 02 Satin Silver
14 03 Black
16 28 Custom Color
20 G3 Round Equalizing Grid
24
Available Options
SC Safety Chain

MODEL 3200
Neck Velocity 400 500 600 700 800 900 1000 1200 1400 1600
Velocity Pressure 0.01 0.016 0.022 0.031 0.04 0.05 0.062 0.09 0.122 0.16
CFM 80 100 120 135 155 175 195 235 275 315
Ps - H 0.004 0.007 0.010 0.013 0.017 0.022 0.027 0.039 0.052 0.069
DIFFUSERS
CEILING
Pt -H 0.014 0.022 0.032 0.044 0.057 0.072 0.089 0.128 0.175 0.228
Ps - V 0.02 0.032 0.046 0.062 0.081 0.103 0.127 0.182 0.248 0.324
Pt -V 0.03 0.047 0.068 0.093 0.121 0.153 0.189 0.272 0.371 0.484
6
NC H - - 15 16 17 19 21 24 26 29
NC V - - - - 15 16 18 22 25 29
Throw H C 1-1-3 1-2-3 1-2-4 1-2-4 2-2-5 2-3-6 2-3-6 2-4-7 3-4-9 3-5-9
Throw V C 2-4-8 4-5-11 4-6-13 5-7-14 5-8-16 6-9-19 7-10-21 8-12-25 10-15-29 11-17-33
Throw V H 0-1-3 1-2-4 1-2-4 1-2-5 2-3-6 2-3-6 2-4-7 3-4-8 3-5-10 4-6-11
CFM 140 175 210 245 280 315 350 420 490 560
Ps - H 0.003 0.004 0.006 0.009 0.011 0.014 0.018 0.026 0.035 0.046
Pt -H 0.013 0.020 0.029 0.039 0.051 0.065 0.080 0.115 0.157 0.205
CEILING DIFFUSERS
Ps - V 0.012 0.018 0.026 0.036 0.046 0.059 0.073 0.104 0.142 0.186
Pt -V 0.022 0.034 0.049 0.066 0.086 0.109 0.135 0.194 0.264 0.345
8
NC H - 16 18 20 21 23 25 28 31 34
ROUND
NC V - - + - - 17 19 24 28 32
Throw H C 1-2-3 1-2-4 2-2-5 2-3-6 2-3-7 2-4-7 3-4-8 3-5-10 4-6-12 4-7-12
Throw V C 3-6-11 5-7-14 6-8-17 6-10-19 7-11-22 8-13-25 9-14-28 11-17-33 13-19-39 15-22-45
Throw V H 1-1-4 1-2-5 1-3-6 2-3-7 3-4-8 3-4-9 3-5-9 4-6-11 4-7-13 5-8-15
CFM 220 275 325 380 435 490 545 655 765 875
Ps - H 0.003 0.004 0.006 0.009 0.011 0.014 0.018 0.026 0.035 0.046
Pt -H 0.013 0.020 0.029 0.039 0.051 0.065 0.080 0.115 0.157 0.205
Ps - V 0.012 0.018 0.026 0.036 0.046 0.059 0.073 0.104 0.142 0.186
Pt -V 0.022 0.034 0.049 0.066 0.086 0.109 0.135 0.194 0.264 0.345
10
NC H - 16 17 19 20 22 23 26 29 32
NC V - - - - - 15 17 23 27 31
3200
Throw H C 1-2-4 2-3-5 2-3-6 2-4-7 3-4-8 3-5-9 3-5-10 4-6-12 5-7-14 6-8-15
Throw V C 4-7-14 6-9-18 7-10-21 8-12-24 9-14-28 10-16-31 12-17-35 14-21-42 16-24-49 10-28-56
Throw V H 1-2-5 1-3-6 2-4-7 2-4-8 3-5-9 4-5-11 4-6-12 5-7-14 6-8-17 6-9-19
CFM 315 395 470 550 630 705 785 940 1100 1255
Ps - H 0.003 0.004 0.006 0.009 0.011 0.014 0.018 0.026 0.035 0.046
Pt -H 0.013 0.02 0.029 0.039 0.051 0.065 0.080 0.115 0.157 0.205
Ps - V 0.011 0.017 0.025 0.034 0.044 0.056 0.069 0.099 0.134 0..175
Pt -V 0.021 0.033 0.047 0.064 0.084 0.106 0.131 0.188 0.257 0.335
12
NC H - - 15 19 23 26 29 35 40 43
NC V - - - 17 20 23 27 32 37 41
Throw H C 2-2-5 2-3-6 2-4-7 3-4-9 3-5-10 4-6-11 4-6-12 5-7-15 6-9-17 7-10-19
Throw V C 4-8-17 7-10-21 8-12-25 10-15-29 11-17-33 12-19-37 14-21-42 17-25-50 19-29-58 22-33-67
Throw V H 1-2-6 1-3-7 2-4-8 3-5-10 4-6-11 4-6-13 5-7-44 6-8-17 7-10-20 8-11-23
CFM 430 535 640 750 855 960 1070 1285 1495 1710
Ps - H 0.003 0.004 0.006 0.009 0.011 0.014 0.018 0.026 0.035 0.046
Pt -H 0.013 0.020 0.029 0.039 0.051 0.065 0.080 0.115 0.157 0.205
Ps - V 0.011 0.017 0.024 0.033 0.043 0.055 0.068 0.097 0.133 0.173
Pt -V 0.021 0.033 0.047 0.064 0.083 0.105 0.13 0.187 0.255 0.333
14
NC H - 16 21 25 29 32 36 41 44 46
NC V - 15 19 23 27 30 33 38 42 45
Throw H C 2-3-6 2-4-7 3-4-9 3-5-10 4-6-12 4-6-13 5-7-14 6-9-17 7-10-20 8-12-22
Throw V C 1-3-13 2-5-21 3-7-28 5-10-33 6-13-38 7-17-43 9-21-48 13-29-57 18-33-67 24-38-71
Throw V H 1-2-5 1-3-7 2-4-8 3-5-9 4-5-11 4-6-12 4-7-13 5-8-16 6-9-19 7-11-22
MODEL 3200
Neck Velocity 400 500 600 700 800 900 1000 1200 1400 1600
Velocity Pressure 0.01 0.016 0.022 0.031 0.04 0.05 0.062 0.09 0.122 0.16
CFM 560 700 840 975 1115 1255 1395 1675 1955 2235
Ps - H 0.003 0.004 0.006 0.009 0.011 0.014 0.018 0.026 0.035 0.046
DIFFUSERS
CEILING
Pt -H 0.013 0.020 0.029 0.039 0.051 0.065 0.080 0.115 0.157 0.205
Ps - V 0.010 0.016 0.024 0.032 0.042 0.053 0.066 0.094 0.129 0.168
Pt -V 0.02 0.032 0.046 0.063 0.082 0.104 0.128 0.184 0.251 0.328
16
NC H 15 20 25 29 33 37 40 45 48 50
NC V 16 20 24 28 31 35 38 43 47 49
Throw H C 2-3-7 3-4-8 3-5-10 4-6-12 4-7-13 5-7-15 6-8-17 7-10-20 8-12-23 9-13-25
Throw V C 2-4-14 3-6-23 4-8-30 5-11-35 6-14-40 8-18-45 10-22-50 14-30-60 20-35-69 26-40-79
Throw V H 1-2-6 1-3-8 2-4-9 2-5-11 3-6-12 4-7-14 5-8-16 6-9-19 7-11-22 8-12-25
CFM 705 885 1060 1235 1415 1590 1765 2120 2475 2825
Ps - H 0.003 0.004 0.006 0.009 0.011 0.014 0.018 0.026 0.035 0.046
Pt -H 0.013 0.02 0.029 0.039 0.051 0.065 0.08 0.115 0.157 0.205
CEILING DIFFUSERS
Ps - V 0.01 0.016 0.023 0.031 0.041 0.051 0.064 0.092 0.125 0.163
Pt -V 0.02 0.031 0.045 0.062 0.081 0.102 0.126 0.181 0.247 0.322
18
NC H - 19 23 27 31 35 38 44 50 54
ROUND
NC V - 16 21 25 30 34 37 43 49 52
Throw H C 2-4-7 3-5-9 4-6-11 4-7-13 5-7-15 6-8-17 6-9-19 7-11-22 9-13-26 10-15-28
Throw V C 2-4-14 3-6-23 4-8-32 5-11-37 6-14-43 8-18-48 10-23-53 14-32-64 20-37-74 26-43-85
Throw V H 1-1-5 1-2-8 1-3-11 2-4-12 2-5-14 3-6-16 4-8-18 5-11-21 7-12-25 9-14-28
CFM 875 1090 1310 1525 1745 1965 2180 2620 3055 3490
Ps - H 0.003 0.004 0.006 0.009 0.011 0.014 0.018 0.026 0.035 0.046
Pt -H 0.013 0.02 0.029 0.039 0.051 0.065 0.08 0.115 0.157 0.205
Ps - V 0.01 0.015 0.022 0.029 0.038 0.049 0.06 0.087 0.118 0.154
Pt -V 0.02 0.031 0.044 0.06 0.078 0.099 0.123 0.176 0.24 0.314
20
NC H - 19 25 29 34 38 41 48 53 57
NC V - - 20 25 30 35 39 45 50 52
3200
Throw H C 3-4-8 3-5-10 4-6-12 5-7-14 6-8-17 6-9-19 7-10-21 8-12-25 10-14-29 11-17-31
Throw V C 2-4-14 2-6-22 4-8-32 5-11-41 6-14-47 8-18-553 10-22-59 14-32-71 19-41-83 25-47-95
Throw V H 0-1-4 1-1-6 1-2-9 1-3-12 2-4-15 2-5-18 3-6-19 4-9-23 5-12-27 7-15-31
CFM 1255 1570 1885 2200 2515 2825 3140 3770 4400 5025
Ps - H 0.002 0.004 0.005 0.007 0.009 0.012 0.015 0.021 0.029 0.038
Pt -H 0.012 0.019 0.028 0.038 0.049 0.062 0.077 0.111 0.151 0.197
Ps - V 0.009 0.014 0.021 0.028 0.037 0.047 0.058 0.083 0.113 0.148
Pt -V 0.019 0.03 0.043 0.059 0.077 0.097 0.12 0.173 0.236 0.308
24
NC H - 19 25 31 36 40 44 50 54 56
NC V - 17 23 28 32 37 40 47 52 56
Throw H C 3-5-10 4-6-12 5-7-15 6-9-17 7-10-20 7-11-22 8-12-25 10-15-30 12-17-35 13-20-37
Throw V C 2-4-17 3-7-27 4-10-38 6-13-50 8-17-57 10-21-64 12-27-71 17-38-/8 23-50-99 30-57-109
Throw V H 1-1-5 1-2-7 1-3-10 2-3-14 2-5-18 3-6-21 3-7-23 5-10-28 6-14-33 8-18-37

DEFINITION OF UNITS
Horizontal throw throw distance in feet at terminal velocities of 150fpm, 100fpm and 50fpm.
DIFFUSERS
CEILING

Ps -H static pressure horizontal
Ps-V static pressure vertical
Pt V total pressure vertical
Throw H C throw horizontal cooling
Throw V C throw vertical cooling
Throw V H vertical heating
CEILING DIFFUSERS
ROUND
3200
MODEL R5750
Model R5750 is an architecturally pleasing plaque face round ceiling
diffuser that blends well into the ceiling surface. It is available in
aluminum, aluminum face with steel backpan and steel construction.
DIFFUSERS
Designed for architectural ceilings and facilities with exposed ductwork
CEILING
Can be used effectively in heating and cooling applications
Uniform 360 discharge pattern
Round face panel is removable for ease of installation
CEILING DIFFUSERS
ROUND
Normal Round
R5750
Duct Size Dim. A Dim. B Dim. C Dim. D Dim. E Dim. F Dim. G Dim. H
6 5 3/4 16 5/8 2 15/16 11 3/4 5/8 9 3/4
8 7 3/4 16 5/8 2 15/16 11 3/4 5/8 9 3/4
10 9 3/4 22 3/16 3 5/16 17 1.0 7/8 14 7/8
12 11 3/4 22 3/16 3 5/16 17 1.0 7/8 14 7/8
14 13 3/4 29 1/4 4 3/16 22 1.0 7/8 19 7/8
16 15 3/4 29 1/4 4 3/16 22 1.0 7/8 19 7/8

SERIES R5750 SPECIFICATIONS
Air diffusers shall be Model R5750-AL (all aluminum), Performance Specification

R5750-AF (aluminum face, steel backpan) or R5750-S The manufacturer shall provide published performance
(all steel) manufactured by METALAIRE. data. Data shall be tested in accordance to ANSI/
Diffuser shall be constructed of a round flat face panel
DIFFUSERS
and a round outer frame. Diffuser shall have a fixed

CEILING
Paint Specification
horizontal pattern. The units shall be the size and quantity
as outlined in the plans and specifications. Process shall be anodic electro-deposition using an
Round face panel shall be removable to allow access including a pressurized spray stage using alkaline
to the round outer frame. Diffuser shall be designed for cleaner and a de-ionized water rinse.
surface mounting applications and have an outer frame
that allows flush mounting to the ceiling opening.
CEILING DIFFUSERS
R5750 MODEL NUMBER SPECIFICATION

ROUND PANEL FACE DIFFUSER
ROUND

R5750-1 Steel 6 Standard
R5750-AF-1 Aluminum Face/ Steel Backpan 8 01 White
R5750-AL Aluminum 10 Optional
12 02 Satin Silver
14 03 Black
16 28 Custom Color
R5750
D3 Aluminum Radial Damper

SD3 Steel Radial Damper
Available Options
SC Safety Chain
SERIES R5750 PERFORMANCE DATA
MODEL R5750
Nk Velocity 400 500 600 700 800 900 1000 12000
Neck Size Pv 0.015 0.024 0.034 0.046 0.06 0.076 0.094 0.136
CFM 79 98 118 137 157 177 196 236
DIFFUSERS
Ps 0.023 0.035 0.052 0.070 0.092 0.117 0.143 0.208
CEILING
6 Pt 0.038 0.059 0.086 0.116 0.152 0.193 0.237 0.344
Throw 1-2-4 2-3-5 2-3-6 2-3-6 2-4-7 3-4-8 3-5-9 4-6-11
NC - - 19 24 29 31 34 38
CFM 140 175 209 244 279 314 349 419
Ps 0.024 0.037 0.054 0.074 0.096 0.122 0.150 0.216
8 Pt 0.039 0.061 0.088 0.120 0.156 0.198 0.244 0.352
Throw 1-2-4 2-3-6 2-3-7 3-4-8 3-4-9 3-5-10 4-6-11 4-7-13
NC - 16 21 26 31 33 35 40
CEILING DIFFUSERS
CFM 218 273 327 382 436 491 545 654
Ps 0.026 0.040 0.058 0.080 0.104 0.132 0.162 0.233
10 Pt 0.041 0.064 0.092 0.126 0.164 0.208 0.256 0.369
ROUND
Throw 3-4-7 4-6-9 4-7-11 5-8-13 6-9-14 7-10-16 7-11-18 9-13-21
NC - - - 24 28 32 35 41
CFM 314 393 471 550 628 707 785 942
Ps 0.035 0.054 0.078 0.106 0.139 0.175 0.216 0.311
12 Pt 0.050 0.078 0.112 0.152 0.199 0.251 0.310 0.447
Throw 4-5-11 4-7-12 5-8-13 6-9-14 7-11-16 8-12-19 9-13-21 11-16-22
NC - - - 26 29 34 36 43
CFM 428 535 641 748 855 962 1069 1283
R5750
Ps 0.025 0.038 0.055 0.075 0.098 0.124 0.153 0.220
14 Pt 0.040 0.062 0.089 0.121 0.158 0.200 0.247 0.356
Throw 4-6-12 5-7-12 6-9-13 7-10-16 8-12-17 9-13-19 10-15-21 12-18-21
NC - - 22 23 25 26 29 33
CFM 559 698 838 977 1117 1257 1396 1676
Ps 0.038 0.058 0.084 0.114 0.149 0.187 0.230 0.328
16 Pt 0.053 0.082 0.118 0.160 0.209 0.263 0.324 0.464
Throw 4-7-13 6-8-13 7-10-15 8-12-18 9-13-19 10-15-21 11-17-23 13-20-24
NC 19 19 24 26 32 33 34 37

PERFORMANCE NOTES FOR SERIES R5750
DEFINITION OF UNITS
Nk Vel Neck velocity is the airstream velocity in the duct just before it reaches the supply outlet;
measured in Feet per Minute
DIFFUSERS

CEILING

CEILING DIFFUSERS
ROUND
R5750
VAV DIFFUSERS
DIFFUSERS
CEILING
VAV DIFFUSERS
The MS series of variable volume diffusers provides both accurate and individual control for
heating and cooling without the use of an air terminal unit. By combining the performance of
a diffuser with the function of an air terminal unit, VAV control strategies can be employed at
a reduced first cost. Better comfort is obtained by the ability to move the zone control to the
diffuser level. Aesthetics are not sacrificed with the sleek, plaquefaced look.
Model MSC is for cooling only applications. The selfcontained thermal

controls, mounted just above the plaque, consist of a single sensor and PAGE 204
mechanical mechanism to generate the flow controller.
Model MSCVH is for heating and cooling applications. The MSCVH is the
same as the MSC with three added thermal controllers utilizing input from PAGE 204
four thermal sensors.
Model MSEHC is for heating and cooling applications and uses a duct sensor
to communicate with a remote mounted thermostat and an electronic motor PAGE 209
to operate the modulating device.

MSC ProductDescription
TheMSC(coolingonly)andtheMSCVH(heating/cooling)are
MODEL MSC/MSCVH
thermallypoweredvariablevolumeairdiffuserswhichare
completelyself poweredandselfcontained. Thethermal
controlactuatorsareboththeroomthermostatsandthe
dampermotor.
The MSC (cooling only) and the MSCVH (heating/cooling)
Tosensetheaverageroomtemperatureacontinuoussample
are thermally powered variable volume air Asmall
ofroomairisinducedupandaroundtheefacepanel. diffusers which
amountofsupplyairisdivertedthroughanorificeagainstanThe
are completely selfpowered and selfcontained.
DIFFUSERS
thermal control actuators are both the room thermostats

inductionwingthenbackintotheprimaryairpathcreating
CEILING
justenoughnegativepressuretoinduceasampleof
and the damper motor. To sense the average room
secondaryroomairaroundtheedgeofthefacepanel,
temperature, a continuous sample of room air is induced up and around the face panel. A small
throughtheinductiontroughandacrossthethermal
amount of supply air is diverted through an orifice against an induction wing then back into the
actuators. Thediffusiondamperismechanicallyopenedand
primary air path, creating just enough negative pressure to induce a sample of secondary room
closedbythethermalactuatorstovarytheflowofwarm/cool
air around the edge of the face panel, through the induction trough and across the thermal
airintothespace.
actuators. The diffusion damper is mechanically opened and closed by the thermal actuators to
Eachthermalactuatorisapreciselycalibratedthermostat
vary the flow of warm/cool air into the space.
Thermalcontrolactuatorsallowheatenergytotransform
intomechanicalenergythroughthemovementofa
Each thermal actuator is a precisely calibrated thermostat
stainlesssteelpiston
Thermal control actuators allow heat energy to transform into mechanical energy through the movement of a stainless
Thethermalactuatorisasmallbrasscylindercontaining
steel piston
petroleumbasedwax. Thewaxexpandswhenheated,
VAV DIFFUSERS
drivingthepistonout.
The thermal actuator isAtorsionspringreturnsthepiston
a small brass cylinder containing petroleum based wax. The wax expands when heated, driving the
asthewaxcoolsandretracts.
piston out. A torsion spring returns the piston as the wax cools and retracts
Thermalactuatorsareusedinavarietyofthermostatic
Thermal actuators
applications. are used in a variety of thermostatic applications. Typical applications include automotive controls,
Typicalapplicationsincludeautomotive
aerospace, marine, medical and many more
controls,aerospace,marine,medicalandmanymore.
MSC/MSCVH
165
DIFFUSERS
CEILING
VAV DIFFUSERS
MSC/MSCVH
166

SERIES MSC SPECIFICATIONS

MSC Cooling only The manufacturer shall provide published performance
MSCVH Heating and Cooling data. Data shall be tested in accordance to ANSI/
Units shall be manufactured by METALAIRE and be of
DIFFUSERS

CEILING
steel construction. Units shall be square with a formed

Paint Specification
backpan and a flat face panel. The face panel shall
project no more than 1/4" below the ceiling grid or
surface. The diffuser shall have the same appearance
from the face regardless of the inlet size. Each diffuser
damper shall consist of an aluminum extruded disc to
provide a variable unobstructed 360 horizontal discharge
for maximum Coanda effect and superior induction. All
diffusers shall have a temperature adjustment scale with
indicators that range from 7078F. The initial set point
shall be factory set at 74F. No tools shall be required.
VAV DIFFUSERS
Model MSC cooling diffuser shall utilize one thermal

actuator to provide VAV room temperature control
for cooling.
Model MSCVH heating and cooling diffuser shall utilize
four thermal actuators to provide both heating and
cooling control. The diffuser is equipped with two room-
temperature-sensing thermal actuators and two heating
change-over thermal actuators. The room temperature
settings for heating and cooling shall be separately
adjustable. One room actuator shall sense temperature
and vary the supply air when cooling. The second actuator
shall sense room temperature and vary the supply air
MSC/MSCVH
when heating. The heating change-over actuators shall

be factory set to engage heating mode when supply air
temperature rises above 78F and will return to cooling
mode when supply air temperature falls below 68F.
MSC MODEL NUMBER SPECIFICATION
THERMAL PLAQUE DIFFUSER COOLING ONLY
MSC-1 Surface Mount 6 Standard
MSC-6 T-bar Lay-in 8 01 White
24 x 24
DIFFUSERS
MSC-8 Tegular Lay-in 10 Available Accessories
CEILING
MSC-9 Donn Fineline/BAFlt Slot 12 BAF-1 3-Way (One Baffle)
BAF-2 2-Way (Two Baffles)
BAF-3 1-Way (Three Baffles)
TBPF T-bar Plaster Frame
MSCVH MODEL NUMBER SPECIFICATION

THERMAL PLAQUE DIFFUSER HEATING AND COOLING
VAV DIFFUSERS
MSCVH-1 Surface Mount 6 Standard
MSCVH-6 T-bar Lay-in 8 01 White
24 x 24
MSCVH-8 Tegular Lay-in 10 Available Accessories
MSCVH-9 Donn Fineline/BAFlt Slot 12 BAF-1 3-Way (One Baffle)
BAF-2 2-Way (Two Baffles)
BAF-3 1-Way (Three Baffles)
TBPF T-bar Plaster Frame
MSC/MSCVH

SERIES MSC PERFORMANCE DATA
MODEL MSC/MSCVH
Throw @ Max. CFM Throw @ 25% of CFM
Inlet SP NC@
Listed Size in. WG Max. CFM Vt50 Vt100 Vt150 Vt50 Vt100 Max. CFM
.05 85 5 3 1 3 1
DIFFUSERS
.10 120 6 3 2 3 2 0.20

CEILING
6 .15* 150 7 4 2 4 3 2A
.20 170 8 5 3 6 4 28
.25 220 8 6 5 7 4 33
.05 160 6 4 2 4 2
.10 225 8 5 3 5 3 20
8 .15 275 9 5 4 6 4 25
.20 320 10 6 5 8 5 29
.25 355 12 7 6 9 6 33
.05 250 7 4 3 5 3
VAV DIFFUSERS
.10 355 9 5 4 6 4 22
10 .1s 450 11 6 5 7 4 26
.20 500 12 7 6 8 5 29
.25 580 13 8 7 10 7 32
.05 365 8 5 4 6 4
.10 520 11 7 6 8 5 23
.1s 650 12 7 6 8 6 27
12
.20 740 14 8 7 10 7 32
.25 820 15 10 9 11 8 36
30 890 17 11 10 12 9 40
MSC/MSCVH
PERFORMANCE NOTES FOR SERIES MSC

DEFINITION OF UNITS
MODEL MSE-HC
The MSEHC diffuser effectively regulates the amount
of supply air into the space and uses a wall-mounted
thermostat to achieve true VAV control in the heating mode,
DIFFUSERS
as well as the cooling mode. Automatic changeover from heating to cooling is standard. The
CEILING
diffuser is designed to maintain Coanda effect (draft free) of discharge air along the ceiling,
providing a sustained velocity throughout the volume range. Operating the diffuser from an
individual wall-mounted thermostat enables users to choose their own desired comfort control
from desk top level, rather than a stratified ceiling level.
Excellent choice for reception areas, offices, conference rooms and buildings with east/west exposure
Economical solution to overcooling or overheating issues in a building that does not warrant a fullblown zoning
or BAS system.
Wall mounted thermostatic control
Powerful, low voltage actuator
VAV DIFFUSERS
True variable air volume in heating and cooling modes
One 40VA transformer will power a single Master (MSEHCM) and up to 19 slave units (MSEHCS)
One 75 VA transformer will power a single Master (MSEHCM) and up to 36 slave units (MSEHCS)
MSE-HC
(Master / Slave)
(Master / Slave)

SERIES MSEHC VAV SMART ZONE DIFFUSER SPECIFICATIONS

MSEHC VAV Smart Zone Diffuser The manufacturer shall provide published performance
Units shall be manufactured by METALAIRE and be of
steel construction. Units shall be square with a formed
DIFFUSERS
backpan and a flat face panel. The face panel shall

CEILING
Paint Specification
project no more than 1/4" below the ceiling grid or
surface. The diffuser shall have the same appearance Process shall be anodic electro-deposition using an
from the face regardless of the inlet size. anodic acrylic paint. Units shall undergo pre-treatment
The diffuser shall include an integral modulating disk cleaner and a de-ionized water rinse.
that continually regulates the volume of supply air in
response to the wall mounted thermostat. Diffusers
dependent on integral air induction ceiling located
sensors or set point adjustment methods other than from
wall mounted thermostats shall not be acceptable.
To ensure finite control of temperature by modulation,
VAV DIFFUSERS
the electric 24Vac actuators shall be a drive-open, drive

closed motor on the electrically driven units. Actuators
that incorporate an expanding material which only drives
the unit open when subjected to heatcausing electrical
current, requiring a spring return mechanism to force the
diffuser to a closed position shall not be acceptable.
The electronic modulating wallmounted thermostatic
control shall be either a 2 to 10Vdc or floating point. All
field wiring, materials and labor shall be supplied and
installed by others.
MSE-HC
MSE-HC MODEL NUMBER SPECIFICATION

THERMAL PLAQUE DIFFUSER
HEATING AND COOLING ELECTRONICALLY CONTROLLED
MSE-HC-6 T-bar Lay-in 6 Standard
12 x 12
MSE-HC-8 Tegular Lay-in 8 01 White
MSE-HC-9 Donn Fineline / Bolt Slot 6 Available Accessories
8 BAF-1 3-Way (One Baffle)
10 24 x 24 BAF-2 2-Way (Two Baffles)
12 BAF-3 1-Way (Three Baffles)
14
SERIES MSEHC PEFORMANCE DATA
MODEL MSEHC
Model fpm vn 300 400 500 600 700 800 900 1000 1200 1400
Inlet Size Pv .006 .010 .016 .022 .031 .040 .051 .062 .090 .122
CFM 60 80 100 120 40 160 180 200 240 280
DIFFUSERS
MSE-HC-M Pt .009 .011 .017 .025 .034 .044 .057 .070 .100 .135
CEILING
MSE-HC-S
Throw 1-1-2 1-1-4 1-2-4 1-3-5 2-3-6 2-4-7 3-4-8 3-4-9 4-5-11 4-6-11
6
NC <15 <15 <15 <15 <15 <15 17 21 28 34
CFM 105 140 175 210 245 280 315 350 420 490
MSE-HC-M Pt .011 .018 .028 .040 .055 .072 .091 .112 .162 .220
MSE-HC-S
Throw 1-2-4 2-3-6 2-4-7 3-4-9 3-5-10 4-6-11 4-6-12 5-7-13 6-9-14 7-10-15
8
NC <15 <15 <15 <15 <15 17 21 25 32 38
CFM 165 220 275 330 385 440 495 550 660 770
MSE-HC-M Pt .017 .029 .043 .060 .082 .108 .136 .168 .243 .331
MSE-HC-S
Throw 2-3-7 3-4-8 3-5-10 4-6-12 5-7-13 5-8-14 6-9-15 7-10-16 8-12-18 10-13-19
10
VAV DIFFUSERS
NC <15 <15 <15 <15 15 20 24 28 35 41
CFM 2040 310 390 470 550 630 710 790 940 1100
MSE-HC-M Pt .023 .037 .059 .085 .115 .151 .191 .237 .338 .461
MSE-HC-S
Throw 2-4-7 4-5-11 5-7-14 5-8-15 6-9-16 7-11-17 8-12-18 9-14-19 11-15-21 13-16-23
12
NC <15 <15 <15 <15 18 `23 27 31 38 43
CFM 320 430 530 540 750 860 960 1070 1280 1500
MSE-HC-M Pt .031 .050 .078 .114 .155 .202 .256 .316 .453 .619
MSE-HC-S
Throw 3-4-8 4-7-13 6-8-16 7-10-17 8-12-19 9-13-20 10-15-21 11-16-23 13-17-25 15-19-27
14
NC <15 <15 <15 <15 20 25 29 33 40 45
PERFORMANCE NOTES FOR SERIES MSEHC
MSE-HC
DEFINITION OF UNITS
Throw Horizontal distances in feet to the terminal vel of 150 , 100 and 50fpm with supply air temp 20F below room air temp

CEILING DIFFUSER
ACCESSORIES
DIFFUSERS
CEILING
900D
PAGE 214
Butterfly Damper for Model 900 Diffuser
BDS
PAGE 214
Steel Butterfly Damper
CEILING DIFFUSER
ACCESSORIES
D3
PAGE 214
Aluminum Radial Opposed Blade Damper
SD3
PAGE 215
Steel Radial Opposed Blade Damper
RSD
PAGE 215
Radial Shutter Damper
D5/D7
PAGE 215
OBDA
PAGE 216
Aluminum Opposed Blade Damper
DIFFUSERS
CEILING
OBD
PAGE 216
Steel Opposed Blade Damper
L9
PAGE 216
Square/Rectangular Equalizing Grid
CEILING DIFFUSER
ACCESSORIES
G3
PAGE 216
Round Equalizing Grid
GD3
PAGE 217
Round Equalizing Grid
TBPF
PAGE 217
T-bar Plaster Frames permit installation
TR/TR DEEP
PAGE 217
Deep Square to Round Transitions

Bladesadjustedthroughdiffuserface
Model900Dopposedbladedamperformodel900
Dampersuppliedwithmountinghardware
Butterflystylebladesforsizes6to12
8bladeradialstyleforsize14
900D ProductDescription
MODEL 900D
900D ProductDescription
Butterflystylebladesforsizes6to12
opposed
Model 900D Butterflystylebladesforsizes6to12
blade damper for model 900
Butterfly style blades for sizes 6" to 12"
DIFFUSERS
8 blade radial style for size 14"

CEILING
Blades adjusted through diffuser face

900D & 900D* Models
Damper supplied with mounting hardware BDS ProductDescription
Damper
Sizes X Y Z
6 5 15/16 5 5/8 3
ModelBDSbutterflydamper
8 7 15/16 7 5/8 4
BDSProductDescription
Twobutterflystyleblades
10 9 15/16 9 5/8 5
Bladesareadjustedthroughthediffuserface
12 11 15/16 11 5/8 6
ModelBDSbutterflydamper 14 13 15/16 13 5/8 7
CEILING DIFFUSER
MODEL BDS
BDS ProductDescription Bladesareadjustedthroughthediffuserface
ACCESSORIES
BDS ProductDescription
ModelBDSbutterflydamper
Model BDSbutterfly
damper Diffuser Neck
BDS Dimension
Two butterfly styleModelBDSbutterflydamper

blades Size A B
Blades are adjusted through

the diffuser face
6 5 3/4 2 1/2
8 7 3/4 3 1/2
10 9 3/4 4 1/2
12 11 3/4 5 1/2
14 13 3/4 6 1/2
D3 ProductDescription15 14 3/4 7
16 15 3/4 7 1/2
ModelD3radialopposedbladedamper
MODEL D3
D3 ProductDescription
Foruseinrounddiffusers
Designedtoprovidefullradialvolumecontrol
D3 ProductDescription ModelD3radialopposedbladedamper
resultinginlowerthannormalpressurelosses
Model D3 radial opposed blade damper
Foruseinrounddiffusers
Overlappingbladedesignensurespositiveshut
For use in round diffusers
Foruseinrounddiffusers Designedtoprovidefullradialvolumecontrol
offwhenrequired
Designed to provide full radial volume control resulting
in lower than normal D3

pressureProductDescription
losses
Designedtoprovidefullradialvolumecontrol Size A B C D
Overlapping blade design ensures positive shut-off

resultinginlowerthannormalpressurelosses 6 5 7/8 1 1/4 3 1/4 4 3/4
offwhenrequired8 7 7/8 1 1/4 3 3/4 5 1/4
when required
offwhenrequired 10 9 7/8 1 1/4 3 3/4 6
Foruseinrounddiffusers 12 11 7/8 2 1/8 3 7/8 6 5/8
Designedtoprovidefullradialvolumecontrol 14 13 7/8 2 1/8 3 7/8 7 1/8

16 15 7/8 2 1/8 3 7/8 8 7/8
18 17 7/8 2 1/8 3 7/8 9 3/8
Overlappingbladedesignensurespositiveshut 20 19 7/8 2 1/8 3 7/8 9 7/8
offwhenrequired 174
MODEL SD3
Size A B C D E
Model SD3 radial opposed blade damper
6 5 7/8 1 1/8 3 7/8 4 1/8 2 1/8
For use in round air diffusers 8 7 7/8 1 7/8 3 7/8 4 7/8 2 7/8
Designed to provide full radial volume control resulting in lower
DIFFUSERS
10 9 7/8 1 7/8 3 7/8 5 5/8 3 5/8
CEILING
than normal pressure losses
12 11 7/8 1 7/8 3 5/8 6 4 1/4
Overlapping blade design ensures positive shut-off when required 14 13 7/8 1 7/8 3 5/8 6 3/4 5
Steel construction 16 15 7/8 1 7/8 3 5/8 7 3/8 5 5/8
18 17 7/8 1 7/8 3 5/8 8 1/8 6 3/8
20 19 7/8 1 7/8 3 5/8 8 7/8 7 7/16
24 23 7/8 1 7/8 3 5/8 7 3/4 6
30 29 7/8 1 7/8 6 11 5/8 7 1/2
36 35 7/8 1 7/8 6 13 1/8 9
CEILING DIFFUSER
ACCESSORIES
MODEL RSD
Model RSD radial shutter damper
Cost effective alternative to butterfly style damper
Design permits very precise damper control and does not
interfere with diffuser air patterns Available Sizes

Steel construction 6
8
10
12
MODEL D5/D7
Model D5/D7 opposed blade damper for 5000 and 7000
For use with Series 5000, D5, and Series 7000, D7.
Aluminum construction, D5A/ D7A
Steel construction, D5/D7

MODEL OBDA/OBD
Model OBDA/OBD square/rectangular opposed blade damper
Tapered blades set in a U-channel frame
L9 ProductDescription
DIFFUSERS
Opposed blades on 1" centers

CEILING
Screwdriver slot operator

ModelL9 Square/RectangularEqualizingGrid
Aluminum construction, OBDA
Designedtoprovideuniformairflowinbranch
Steel construction, OBD
ducts
Pretensionedbladesadjustindividually
MODEL L9
CEILING DIFFUSER
ACCESSORIES
Model L9 Square/Rectangular Equalizing Grid

Designed to provide uniform airflow in branch ducts
Pre-tensioned blades adjust individually
G3 ProductDescription
ModelG3RoundEqualizingGrid
Availableinsizesfrom6to24
MODEL G3
Model G3 Round Equalizing Grid
Available in sizes from 6" to 24"
Diffuser Neck Diameter
6 8 10 12 14 16 18 20 24
G3 Outside Diameter
5 3/4 7 3/4 9 3/4 11 3/4 13 3/4 15 3/4 17 3/4 19 3/4 23 3/4
ModelGD3RoundCombinationGridandDamper
Forusewithalldiffusers
Sizesavailablefrom6to20
MODEL GD3
Model GD3 Round Combination Grid and Damper
For use with all diffusers
DIFFUSERS
CEILING
Sizes available from 6" to 20"
Dimension
Size 6 6 10 12 14 16 18 20
D 5 7/8 7 7/8 9 7/8 11 7/8 13 7/8 15 7/8 17 7/8 19 7/8
TBPF ProductDescription
MODEL TBPF ModelTBPFTbarPlasterFramespermit

installationofTbarframestyleceilingdiffusersinto
plasterframeorgypsumceilings,andareavailable
Model TBPF T-bar Plaster Frames permit installation of T-bar
instandardTbarsizes.
CEILING DIFFUSER
frame style ceiling diffusers into plaster frame or gypsum
ACCESSORIES
ceilings, and are available in standard T-bar sizes. ConvertsTbarframetoSurfaceMount
Available Size (TBPF & STBPF Models)
Converts T-bar frame to Surface Mount
Availableinaluminum,TBPF,orsteel,STBPF,
Nominal Overall
construction
Available in aluminum, TBPF, or steel, STBPF, construction 12 x 12 13 3/16 x 13 3/16
24 x 12 25 3/16 x 13 3/16
24 x 24 25 3/16 x 25 3/16
36 x 24 37 3/16 x 25 3/16
36 x 36 37 3/16 x 37 3/16
48 x 24 49 3/16 x 25 3/16
48 x 48 49 3/16 x 49 3/16
13 x 13 14 3/16 x 14 3/16
TR/TRDeep ProductDescription
ModelTR/TRDeepSquaretoRoundTransitions
MODEL TR/TR DEEP Availableforallductedsupplyandreturndiffusers

Provideeconomicalmeansofadaptingsquare
neckdiffuserstoroundneckconnections
Model TR/TR Deep Square to Round Transitions TRDeeptransitionsprovideadditionaldepthto
Available Size
Available for all ducted supply and return diffusers accommodatesomedampers
Square Neck Size Round Neck Size
Provide economical means of adapting square neck diffusers 6x6 4, 5 & 6
to round neck connections 8x8 5, 6, 7 & 8
TR Deep transitions provide additional depth to accommodate 9x9 5, 6, 7, 8 & 9
some dampers 10 x 10 5, 6, 7, 8, 9 & 10
12 x 12 5, 6, 7, 8, 9, 10, 11 & 12
14 x 14 5, 6, 7, 8, 9, 10, 11, 12 & 14
15 x 15 5, 6, 7, 8, 9, 10, 11, 12, 14 & 15
16 x 16 5, 6, 7, 8, 9, 10, 11, 12, 14, 15 & 16
18 x 18 5, 6, 7, 8, 9, 10, 11, 12, 14, 15, 16 & 18
22 x 22 5, 6, 7, 8, 9, 10, 11, 12, 14, 15, 16, 18, 20 & 22

LINEAR DIFFUSERS AND GRILLES
The METALAIRE line of Linear Diffusers and Grilles is designed to satisfy the most discerning
architect's design concept without compromising engineering performance. Linear slot diffusers
and grilles can be divided into three categories: Formations, Linear Slot Diffusers and Linear
Bar Grilles.
Formations satisfy the most demanding engineering and architectural

criteria, providing superior air distribution, performance and sculpted
elegance. Formations are available in linear, square and curved
configurations. The refined lines and visual architectural appeal of
Formations makes it ideal for integration into any ceiling system. PAGE 2
LINEAR DIFFUSERS AND GRILLES

Linear Slot Diffusers are an excellent choice for continuous linear
applications such as perimeter office space, airport terminals,
convention centers and shopping malls. The flexibility of these
PAGE 68
diffusers allows installation in a variety of applications to maximize
occupant comfort. Linear slot diffusers are available in both straight
and curved applications.
Linear Bar Grilles are engineered for supply and return air distribution
in heating and cooling applications and are designed for sidewall,
PAGE 129
floor, sill and ceiling installation. Linear bar grilles are available in
straight, continuous and curved applications.
2013 Metal Industries, Inc. LDG1

FORMATIONS LINEAR DIFFUSERS
FORMATIONS LINEAR FORMATIONS TEE SYSTEM
LINEAR DIFFUSERS
FORMATIONS INTEGRA FORMATIONS PLENUMS

AND GRILLES
FORMATIONS ACCESSORIES
LINEAR DIFFUSERS
FORMATIONS
METALAIRE Formations is designed to integrate with all ceiling systems. Formations are
available in both straight and curved sections to satisfy the most demanding architectural
designs. The Formations line of architectural diffusers is an excellent choice for offices,
libraries, airports, community buildings, restaurants, lobbies and retail spaces.
Formations Linear
The Formations series of linear diffusers is designed for ceiling and sidewall
installation and is suitable for both commercial and residential applications.
Formations can also be curved for ceiling or sidewall applications.
FAL Formations continuous linear
FALC Formations continuous linear Concealed Mounting PAGE 4
LDG2 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
Formations Tee System
The Formation Tee System is designed for ease of installation and can be
easily removed and relocated if needed.
FTS Formations and plenum for Tee System
FTSB Formations and plenum for Bolt Slot Systems
FTSI Formations and plenum for Tee System Insulated
FTSBI Formations and plenum for Bolt Slot Systems Insulated PAGE 17
Formations Integra
The Integra series is designed to lay in an acoustical T-bar or hard ceiling. The
Integra incorporates the ceiling material as the face of the diffuser blending it
into the ceiling design.
FAI Formations Integra supply
FAII Formations Integra supply Insulated
LINEAR DIFFUSERS
FAIR Formations Integra return PAGE 55
AND GRILLES
Formations Plenums
The UPFAL/UPFALC series plenum is designed for the FAL/FALC series
Formation to connect the diffuser to the ducted supply or return.
UPFAL Formations plenum Standard
UPFALC Formations plenum Hemmed
UPIFAL Formations plenum Standard insulated
UPIFALC Formations plenum Hemmed insulated PAGE 58
Formations Accessories
FAM Formations miter corner
LINEAR DIFFUSERS
FAMSA Formations special angle
FORMATIONS
FAR Formations perforated return shield
FASE Formations replacement end borders
FAFC Formations replacement spacer blocks
FODR Formations face operated damper rod
ROD Formations remote operated damper PAGE 61

FAL FAL FAL
Product
Product Descrip$on
Product Descrip$on
Descrip$on

The The FThe
orma$ons
Forma$ons
Forma$ons FAL FAL
sFeries series
AL is eingineered
series s ies ngineered
engineered for fsor upply,
for supply,
supply,
return
return o r e
o xhaust
r e xhaust a ir
a d ir
istribu$on
d istribu$on
return or exhaust air distribu$on in hea$ng, cooling i n hi n
ea$ng,
h ea$ng, c ooling
c ooling
and and
ceiling
vand
ceiling aMODEL FAL
en$la$ng
ven$la$ng
ven$la$ng
nd a nd
s
applica$ons.
idewall
s
applica$ons.
idewall i
applica$ons.
nstalla$on,
i nstalla$on,
ceiling and sidewall installa$on, and work equally
It i s
It d Iit
a nd
esigned
s ids esigned
a nd
w
designed
ork
w ork
e
for for
qually
e
for
qually
well well iwell
n vin
ariable-volume
ivn ariable-volume
The Formationsor
variable-volume coonstant
FAL r ocseries
r onstant
constant visolume
vengineered
olume
volume air air air
for supply, return or exhaust
distribu$on
distribu$on
distribu$on s ystems.
air distribution s ystems.
systems. F orma$ons
F orma$ons
in heating,
Forma$ons i s s
cooling i
uitable
s s uitable f
is suitable or
and ventilating f or
for applications. It is
both both commercial
both commercial
c ommercial a nd a nd
r aesiden$al
nd r esiden$al
r esiden$al
designed for ceiling and sidewall installation, and works equally well in a pplica$ons.
a pplica$ons.
a pplica$ons.
Numerous
Numerous
Numerous frame
frame
variable-volume styles
frame styles aor
styles llow
aconstant
llow
atllow
he the stpecier
svolume
he pecier
specier to air m to ake
m ake
tdistribution
o m ake systems. Formations
an an
aesthe$c
an aesthe$c
aesthe$c
is suitable statement.
statement.
statement.
for both commercial and residential applications. Numerous
Available
Available Available
frame with
wstylesith
wstraight
straight
ith straight
allow or the
coombo
r ocspecifier
r ombo
combo pa[ern pa[ern
topa[ern
make an aesthetic statement.
controllers
controllers
controllers
Available in m in aximum
m
iwith
n m aximum
aximum
straight 24 or2combo
i4
ncrements
24 increments
ipattern
ncrements controllers in maximum 24" increments
Standard
Standard Standard slot
Standard slot
wslot
idths
widths
slot wwidths of 1o,
idths f o11",
of 1,
f .5,
1.5,
11.5",
, 12.5,
, 222.5"
2", ,
.5
2and
2, .5
a2nd and
.5
3" 3a nd
3 3
Available
Available Available in siingle
Available
n isn ingle
sec$on
insingle
sec$on
single ssection ec$on lengths lengths
lengths lengths uup p uttoo
p 9tp o
u96" 6
t9o 6
96
Available
Available Available w ith
w ith
o ne
with o ne
o r to wo
r t wo
s lots
s lots
Available withoone ne orotwo r two
slotsslots
Available
Available Available in 5in
bi5n
order
b5order
b congura$ons
order congura$ons
c ongura$ons
Available in 5 border configurations
Quick
Quick installa$on
installa$on with with state state
sotate
f tohe f otf he
atrt am rt
aoun$ng
mm oun$ng
LINEAR DIFFUSERS
Quick installa$on w
Quick installation with state of the art mounting hardware
ith he rt oun$ng
hardware hardware
AND GRILLES
hardware
Can
Can bCan e Can
e bc urved be curved
bce urved to pto
curved
toroduce
roduce
tp
produce
o produce a aaat
flat
afat face,
ace,
concave
face,
at fcace,
oncave
concave or convex
concave or or face
or
unit
convex convex
convex face face
fuace
nit
unit
unit

LINEAR DIFFUSERS
FORMATIONS
S Slot W X Border Y Border H

Model Width Width Width Width Height
FAL-10 1 2 3/4 1 5/16 7/8 2 3/4
FAL-15 1 1/2 3 3/4 1 9/16 1 1/8 2 3/4
FAL-20 2 4 3/4 1 13/16 1 3/8 2 3/4
FAL
FAL-25 2 1/2 5 3/4 2 1/16 1 5/8 3 3/16

FAL-30 3 6 3/4 1 13/16 2 5/16 3 5/8
4 4 4
LINEAR DIFFUSERS
AND GRILLES
S Z WT Border H
Model Slot Width Border Width Border Width Width Height
FAL-10 S 1 Z 1 3/8 Width 5 1/8 WT 6 15/16 2 3/4
FAL-15 Slot 1 1/2Border 1 7/8Border 7 1/8Border 8 15/16 H 2 3/4
Model FAL-20 Width 2 Width 2 3/8 Width 9 1/8 Width 10 15/16 Height 2 3/4
LINEAR DIFFUSERS
FAL-10 1 2 1/2 1 3/8 2 7/8 5 1/8 11 1/86 15/16
12 15/162 3/4 3 3/16
FORMATIONS
FAL-25
FAL-15 FAL-30 1 1/2 3 1 7/8 3 3/8 7 1/8 13 1/88 15/16 14 15/162 3/4 3 5/8
FAL-20 2 2 3/8 9 1/8 10 15/16 2 3/4

FAL-25 2 1/2 2 7/8 11 1/8 12 15/16 3 3/16
FAL-30 3 3 3/8 13 1/8 14 15/16 3 5/8
FAL

5

The Forma$ons FALC series is engineered for
supply, return or exhaust air distribu$on in hea$ng,
cooling and ven$la$ng applica$ons. It is designed
for ceiling and sidewall installa$on, and work
equally well in variable-volume or constant volume
MODEL FALC
air distribu$on systems. Forma$ons is suitable for
both commercial and residen$al applica$ons.
Numerous frame sFALC
The Formations tyles series
allow is
the specier for
engineered to m ake return or exhaust
supply,
an aair esthe$c statement.
distribution in heating, cooling and ventilating applications. It is
Available w ith
designed for ceiling straight or combo
and sidewall pa[ern and works equally well in
installation,
controllers
variable-volume in moraximum 24 increments
constant-volume air distribution systems. Formations
Standard slot widths of 1, 1.5, 2residential
is suitable for both commercial and applications.
, 2.5 and 3 Numerous
frame styles allow the specifier to make an aesthetic statement.
Available in single sec$on lengths up to 96
Available with straight or combo pattern controllers in maximum 24" increments
Available with one or two slots
Standard slot widths of 1", 1.5", 2", 2.5" and 3"
Available in 2 border congura$ons
Available in single section lengths up to 96"
Standard concealed moun$ng
Available with one or two slots
Can be curved to produce a at face, concave or
Available in 2 border configurations
convex face unit
LINEAR DIFFUSERS
Standard concealed mounting

AND GRILLES
Can be curved to produce a flat face, concave or convex face unit

LINEAR DIFFUSERS
FORMATIONS
One Slot Formations

Model Formation Unit Slot Width W (width) A Border (width) B Border (width) H Height
FALC-10 1 3 3/4 1 15/16 7/8 2 3/4
FALC
FALC-15 1 1/2 4 1/4 1 9/16 1 1/8 2 3/4

FALC-20 2 5 1/4 1 13/16 1 3/8 2 3/4
FALC-25 2 1/2 6 1/4 2 1/16 1 5/8 3 3/16
FALC-30 3 7 1/4 2 5/16 1 7/8 3 5/8
Two Slot Formations
LINEAR DIFFUSERS
Model Formation Unit Slot Width W (width) B Border (width) H Height
AND GRILLES
FALC-10 1 5 5/8 1 3/8 2 3/4
FALC-15 1 1/2 7 5/8 1 7/8 2 3/4
FALC-20 2 9 5/8 2 3/8 2 3/4
FALC-25 2 1/2 11 5/8 2 7/8 3 3/16
FALC-30 3 13 5/8 3 3/8 3 5/8
LINEAR DIFFUSERS
FORMATIONS
FALC

MODEL FAL/FALC CURVED
The Formations FAL series can be curved to accent ceilings and walls or
complement custom designs. Using a stretch form process, each piece is
individually curved to match the required radius, ensuring a uniform curve
without ripples on the face of the diffuser. Inside Rail
Inside Rail
One and two slot units are available in flat face, concave or convex curves and Radius
in slot widths of
1", 1.5", 2" and 2.5" (3" slot width is not available curved)
Radius Center
Rail
The available borders are AA and CC (center rails are white with the 2 Slot CC border)
Outside Rail Inside Rail Outside Rail

Inside Rail
Radius
Center
LINEAR DIFFUSERS
Radius
Inside Rail Rail
AND GRILLES
Inside Rail
Outside Rail Outside Rail
Radius Radius Center

Inside Rail Rail
Inside Rail
ONE SLOT TWO SLOT
Radius Radius Center

LINEAR DIFFUSERS
Rail
FORMATIONS
Radius
RadiusONE SLOT TWO SLOT
CONCAVE CURVE
Radius
Radius
ONE SLOT CONCAVE TWO SLOT CONCAVE

FAL/FALC CURVED
Radius Radius
ONE SLOT CONVEX TWO SLOT CONVEX
Radius
Radius Radius
Inside Rail
Radius
Radius
Outside Rail
CONVEX CURVE
ONE SLOT TWO
Radius
Radius
Radius Radius
Radius Radius
LINEAR DIFFUSERS
AND GRILLES
ONE SLOT CONCAVE TWO SLOT
NOTE: Curved plenums are

NOTE: Curved plenumsavailable,
are contact your
LINEAR DIFFUSERS
OUTSIDE DOWN available, contact your METALAIRE representative.
DOWN
FORMATIONS
METALAIRE representative. Radius
ONE SLOT CONVEX TWO SLOT
DIRECTION OF AIR FLOW
FAL/FALC CURVED
NOTE: Cu
available,
INSIDE OUTSIDE DOWN METALAIR

adjusted to meet most applications and
can direct supply air to the right, left or
vertically in 2' increments. Appropriate
to use when the diffuser is being used
in a return, supply or exhaust mode, the
Standard Pattern Controller can also
FORMATIONS PATTERN CONTROLLER OPTIONS
act as a damper when fully closed.
STANDARD PATTERN CONTROLLER
The standard pattern controller is extremely versatile and fully adjustable; it provides maximum comfort for every room
occupant. This controller is typically used to throw air along the ceiling out of the occupied zone, providing excellent
mixing with the room air at low and high velocities. The standard pattern controller can be adjusted to meet most
applications and can direct supply air to the right, left or vertically in 2' increments. Appropriate for when the
diffuser is being used in a return, supply or exhaust mode, the standard patternPATTERN
controller can also act as a damper
23
COMBO CONTROLLER
when fully closed.
The Formations Combo Pattern

Controller, Patent 6,386,970, is a
unique state-of-the-art solution offering
LINEAR DIFFUSERS
unequaled flexibility. The Combo

FULLY DAMPERED VERTICAL
AND GRILLES
Pattern Controller allows adjustment to

the air stream in the field, for optimum
performance and comfort. Superior
performance is obtained both in
sidewall and high-bay applications, as
well as in any standard ceiling
LEFT application. With Formations Combo

RIGHT
Pattern Controller you always have
flexibility to choose, on the job site,
the most effective pattern controller
LINEAR DIFFUSERS
COMBO PATTERN CONTROLLER adjustment. Combo Pattern Controller

The combo pattern controller allows adjustment to the air stream in the field, for optimum performance and comfort.
FORMATIONS
is available in straight sections only.

Superior performance is obtained both in sidewall and high bay applications, as well as in any standard ceiling
application. With the combo pattern controller you always have flexibility to choose, in the field, the most effective
pattern controller adjustment. The combo pattern controller is available in straight sections only.
FAL/FALC CURVED
FULLY DAMPERED SIDEWALL VERTICAL OFFSET
LEFT RIGHT VERTICAL
24
MOUNTING CLIP DETAILS
24
24
24
1/2"
F1F1Mounting
MOUNTINGHardware HARDWAREis 2"
F1 1/2"1 3/16"
typically
Mounting used with
F1 MOUNTING
hardware F1 isBorder
HARDWARE
typically 2"
F1 1 3/16"
Aused
or Border
with
Mounting Border CA for
or standard
Border
hardware HARDWARE C
F1 is typically
1/2"
F1hard
for MOUNTING
ceiling installations, when
2"
1 5/16" 1/2"
5/8"
used gypsum
with Border Aboard
F1 MOUNTING HARDWAREor Borderceiling.
C F1 2" 1 3/16"
mounting
Mounting
for to a standard
hardware
hard ceiling F1 is5/8"
installations, gypsum
typically
when F1 1 15/16" 1 3/16"
13/16"
board
used ceiling
with
Mounting is
Border
hardwarerequired.
A or
F1 Border
is C
typically
mounting to a standard 5/8" gypsum
used
for with
hard Border
ceiling 13/16"
1 15/16"
board ceiling A or Borderwhen
is installations,
required. C
for hard ceiling
mounting installations,
to a standard when
5/8" gypsum F2 1 5/16" 1/2"
F2 MOUNTING
mounting
board to aisstandard
ceiling HARDWARE
required. 5/8" gypsum
1 13/16"
F2 1 13/16" 1/2"
F2 F2
board
The MOUNTING
ceiling is HARDWARE
is required.
hardware used to mount a
hard
The ceiling
F2 over the
hardware face to
isHardware
used of mount
BorderaA. F2 2" 1/2"
1 7/8"
F2 F2Mounting
MOUNTING HARDWARE 1/2"
hard ceiling over the face of Border A. F2 2"
LINEAR DIFFUSERS
F2
isThe MOUNTING
used to mount HARDWARE
a hard 1 7/8"
F2 hardware is used to mount a Trim By Others
AND GRILLES
ceiling
The F2
hard over the
hardware
ceiling over face
is used
the ofofmount
face to BorderaA. 1 5/16"
2" 1 7/8"
Trim By Others
hard ceiling
Border A.over the face of Border A. 2"
1 5/16"
1 15/16" 1 7/8"
Trim By Others
1 15/16"
1 5/16"
F3
F3 MOUNTING HARDWARE Trim By Others 2"
1 5/16"
F3 1 15/16"
F3mounting
F3 MOUNTING HARDWARE
hardware is used 2"
1 15/16"
to
F3 mount Border A for sidewall
F3mounting
MOUNTING
applications.
hardware is used
HARDWARE F3
2" 2"
to
F3mount Border A for
MOUNTING sidewall
HARDWARE F3
F3 mounting hardware is used 2" 1/2"
applications. 2"
F3 mounting
F3
to mount Border
Mounting hardware is used is
A Hardware
for sidewall 1/2"
to mount Border A for sidewall
applications. 2"
used to mount Border A for
applications. 5/8"
2" 1/2"
sidewall applications. 5/8" 1/2"
LINEAR DIFFUSERS
F4 MOUNTING HARDWARE 5/8"
F4 2"
F4mounting
MOUNTING HARDWARE
FORMATIONS
5/8"
F4 hardware is used to F4 2"
mount
F4 Border
mounting A along
hardware the perimeter
is used to
F4
of a MOUNTING
ceiling with a HARDWARE
return air slot.
mount Border A along
F4 MOUNTING HARDWARE the perimeter F4
2 1/2" 2"
F4
of amounting hardware
ceiling with a returnisair
used
slot.to F4 2"
F4 mounting
mount Borderhardware
A along theis used to
perimeter 2 1/2" 1/2"
F4mount
of
Mounting
Border
a ceiling
Hardware
withA aalong theairperimeter
return slot. 1/2"
isof used towith
a ceiling mounta returnBorder
air slot. 2 1/2"
2 1/2"1 1/8"
A along the perimeter of a 1/2"
1 1/8" 1/2"
ceiling with a return air slot.
F4
l 1 1/8"
F4 MOUNTING HARDWARE
25
MOUNTING CLIP DETAILS 1 1/8"
F4
l 2"
F4 MOUNTING
Mounting hardware HARDWARE
F4 is used to flush
2"
mount
Mounting Border D against
F4 isaused
hardware HARDWARE sidewall.
to flush
F4
l
FAL/FALC CURVED
F4 MOUNTING F4
ll
mount Border D against
F4 MOUNTING a sidewall.
HARDWARE 2 1/2" 2"
2"
Mounting hardware 2"
F4 is used to flush F5
F5 MOUNTING HARDWARE 2"
1/2"
Mounting
mount
F5 Mounting hardware
Border F4 isaused
D against
Hardware to flush
sidewall.
is 1 3/4"
2 1/2"
Mounting hardware F5 is used to flush
1 5/8"
mount
1 3/4"
Border
1 5/8" D against a sidewall. 1/2"
used to 1flush 5/16" mount Border mount Border B against a sidewall.
2 1/2"
1 5/16"
B against a sidewall. 2 1/2"1 1/8" 1/2"
7/16"
1 1/8" 1/2"
7/16"
Tape and Spackle
1 1/8"
1 1/8"
01/4 THRU
01/4 THRU
F6 F6 MOUNTING HARDWARE
1" 1/2"
F6 mounting hardware is used for easy
2" suspension of the Formations unit from 1/2"
1 1/16"
1"
1/2" the structure. The clip is designed to LDG11
utilize standard hanger wire.
2"
F5
F5
2"
2" F5 MOUNTIN
F5 MOUNTIN
Mounting hardware
Mounting hardware F
3/4"
11 3/4" 5/8"
11 5/8" F5 mount Border
Border BB aga
aga
5/16"
11 5/16" 2" mount
F5 MOUNTIN
1 3/4" Mounting hardware

1 5/8"
1 5/16" mount Border B aga
7/16"
7/16"
MOUNTING CLIP DETAILS Spackle

andSpackle
Tapeand
Tape
7/16"
01/4 THRU
01/4 THRU
Tape and Spackle
F6 Mounting Hardware 1" 1/2"

01/4 THRU
F6
F6 F6 MOUNTIN
F6 MOUNTIN
1" 1/2"
is used for easy suspension F6 mounting
F6 mounting hardwa
hardwa
of the Formations unit from 2"
2" F6 suspension of
suspension of the
F6 MOUNTIN
the Fo
F
1/16"
11 1/16" 1" 1/2"
1/2" the structure.
structure.The
The cli
cl
the structure. The clip is 1/2" the
utilize
utilize standard
F6 mounting hardwa
standard han
hang
designed to utilize standard 2" suspension of the F
hanger wire. 1 1/16" 2"
2" 1/2" the structure. The cl
3/16" utilize standard han
3/16"
2"
F7 Mounting Hardware 3/16"
can be used to integrate the F7

F7 F7 MOUNTIN
F7 MOUNTIN
LINEAR DIFFUSERS
1/2"
1/2"
Formations assembly into Mounting hardware
Mounting hardware F
AND GRILLES
integrate the
integrate the Format
Forma
an acoustical suspension F7 F7 MOUNTIN
1/2" an acoustical
an acoustical suspensuspe
system. The F7 clip is field 3"
3" 3"
3" F7
F7 clip isis field
Mounting
clip field forme
hardware
forme
formed and attached to the the
the cross tees.
integrate
cross tees.
the Forma
cross tees. an acoustical suspe
3" 3" F7 clip is field forme
the cross tees.
2"
F10
F10 F10 MOUNTIN
F10 MOUNTIN
F10 Mounting Hardware 1 9/16" F10 mounting
F10 mounting hardw
hardw
is used to align the 2" align
align the Formations
the
F10 Formations
MOUNTIN
F10
Formations diffuser in aa Bolt-slot
in Bolt-slot tee
tee bar
ba
1 9/16" F10 mounting hardw
13/16"
surface in a Bolt-slot align the Formations
LINEAR DIFFUSERS
T-bar application. in a Bolt-slot tee ba

FORMATIONS
13/16"
F1
F11
Spline Clips
Spline Clips are
are use
use
F11l
F11l
ll of the
of the Formations
FormationsF1 did
F11 Alignment Strips
straight and
straight and true
true inst
ins
are used to align sections Spline Clips are use
6" F11l
of the Formations diffuser, l of the Formations d
1 1/4" straight and true ins
ensuring a straight and
true installation in a 6"
continuous run. 1 1/4"

FAL/FALC CURVED
26
HARD CEILING APPLICATION
HARD CEILING APPLICATION
Ceiling Framing Ceiling Framing

F1l F1l F1l F1l
l l l l
Tape and Spackle
BORDER AA HARD CEILING BORDER CC HARD CEILING
Screwl
LINEAR DIFFUSERS
Tee l
Ceiling Tile
AND GRILLES
Ceiling Framing F6
F7 Clip
F2l F2l
l l
F1
Trim By Others
BORDER AA BORDER AA HARD CEILING

HARD CEILING / COVERED FLANGE
LINEAR DIFFUSERS
FORMATIONS
F1l F1l
l l
l Ceiling Framing Tape and S

Wall Framing Wall Framing Spackle
F1l F1l
l l
F1l F1l
l l
Tape and Spackle

FAL/FALC CURVED
BORDER AA SIDE WALL BORDER AC HARD CEILING BORDER CC SIDE WALL

F3
F1
Tape andl
Spackle
Tape and
Spackle
andl
ckle Tape and BORDER DC
SpackleBORDER BA BORDER AA
BORDER BA BORDER AA
HARD CEILING PERIMETER APPLICATION
ER DC Ceiling Framing BORDER DA
F4
l Ceiling Framing Ceiling Framing
F4
Ceiling Framing
F1
F4
l Ceiling Framing
F4 F5
Ceiling Framing
Ceiling Framing
Ceiling Framing F5
F1 Ceiling Framing
Ceiling Framing Ceiling Framing
Ceiling Framing
F3 F1
Tape andl
Spackle
F1
Tape and
Tape andl Spackle
Spackle
BORDER BA
BORDER DC BORDER DA Available Return Air Tape and
Trim By Others Spackle
Tape and Spackle Available Return Air Tape and
BORDER DC BORDER DA
LINEAR DIFFUSERS
ER BA Tape and Spackle

BORDER AA BORDER BA BORDER AA BORDER BC
AND GRILLES
Ceiling Framing
BORDER BA BORDER AA BORDER BC
Ceiling Framing
Ceiling Framing
Ceiling Framing F3
Ceiling Framing
Ceiling Framing
F3
F5
Ceiling Framing
Ceiling Framing
Tape and
Spackle F1
Available Return A
BORDER BA BORDER AA Trim By Others
Tape and
Spackle Tape and Spackle
LINEAR DIFFUSERS
BORDER BA BORDER
BORDER BA AA BORDER A
FORMATIONS
Available Return Air Tape and

Spackle
BORDER AA BORDER BC
F5
Ceiling Framing
Ceiling Framing
g Framing
F5
Ceiling Framing
F1 Ceiling Framing
Ceiling Framing
F1

FAL/FALC CURVED
ape and Spackle

RDER BA BORDERTrim
AABy Others BORDER BC Spackle
Tape and Spackle
BORDER BA BORDER AA BORDER BC
ACOUSTICAL CEILING APPLICATION
LINEAR DIFFUSERS
AND GRILLES
END FABRICATION DIMENSIONS
LINEAR DIFFUSERS
C C C C
FORMATIONS
O O O O
C
C
FAL/FALC CURVED
C
C
O O O O
MITERED END END BORDER END CAP OPEN END

2 EB 1 EB OO MM
BORDER TYPE SLOT WIDTH C O C O C O C O
1 D-1/4 D+1 3/8 D-1/8 D+11/16 D D D-1/4 D+11/16
1.5 D-1/4 D+1 3/8 D-1/8 D+11/16 D D D-1/4 D+11/16
AA 2 D-1/4 D+1 3/8 D-1/8 D+11/16 D D D-1/4 D+11/16
2.5 D-1/4 D+1 3/8 D-1/8 D+11/16 D D D-1/4 D+11/16
3 D-1/4 D+1 3/8 D-1/8 D+11/16 D D D-1/4 D+11/16
1 N/A N/A N/A N/A D D D-1/4 D+11/16
CC 1.5 N/A N/A N/A N/A D D D-1/4 D+11/16
AC
2 N/A N/A N/A N/A D D D-1/4 D+11/16
BA
BC 2.5 N/A N/A N/A N/A D D D-1/4 D+11/16
LINEAR DIFFUSERS
3 N/A N/A N/A N/A D D D-1/4 D+11/16

AND GRILLES
- - - -
MO 2EC 1EC
BORDER TYPE SLOT WIDTH C O C O C O
1 D-1/8 D+11/32 D-1/4 D D-1/8 D
1.5 D-1/8 D+11/32 D-1/4 D D-1/8 D
AA 2 D-1/8 D+11/32 D-1/4 D D-1/8 D
2.5 D-1/8 D+11/32 D-1/4 D D-1/8 D
LINEAR DIFFUSERS
3 D-1/8 D+11/32 D-1/4 D D-1/8 D

FORMATIONS
1 D-1/8 D+11/32 D-1/4 D D-1/8 D

CC 1.5 D-1/8 D+11/32 D-1/4 D D-1/8 D
AC
2 D-1/8 D+11/32 D-1/4 D D-1/8 D
BA
BC 2.5 D-1/8 D+11/32 D-1/4 D D-1/8 D
3 D-1/8 D+11/32 D-1/4 D D-1/8 D
Note: D = Listed Size.

FAL/FALC CURVED
SERIES FAL/FALC SPECIFICATIONS
FORMATIONS ARCHITECTURAL LINEAR Performance Specification
SLOT DIFFUSER EXTRUDED ALUMINUM The manufacturer shall provide published performance
MODELS FAL/FALC data. Data shall be tested in accordance to ANSI/
Diffusers shall be models FAL/FALC manufactured by ASHRAE Standard 70-2006.
METALAIRE. Units shall be constructed of heavy gauge
extruded aluminum. The units shall be available in 1", Paint Specification
1 1/2", 2", 2 1/2" and 3" widths. One and two slot units Process shall be anodic electro-deposition using an
shall be available. anodic acrylic paint. Units shall undergo pre-treatment
The diffusers shall be available in sections limited to a
maximum of 96". Units longer than 96" are formed by
butting multiple diffuser sections together with alignment
strips at the ends to form an unbroken appearance.
LINEAR DIFFUSERS
AND GRILLES
FORMATIONS MODEL NUMBER SPECIFICATIONS
ARCHITECTURAL LINEAR
Model Slot Width Border Style Frame Configeration # of Slots End Detail Finish Mtg Hdw Pattern Controller
FAL 10-1 AA 1 - Surface Mount 1 2EB 20 - White/Black F1 C - Combo
15-1.5 AC 6 - T-bar Lay in 2 1EB F2 S - Straight
20-2 BA 2EC F3
25-2.5 BC 1EC F4
LINEAR DIFFUSERS
30-3 CC MM F5
FORMATIONS
MO F6
OO F7
F10
F11
MODEL FALC
Model Slot Width Border Style Frame Configeration # of Slots End Detail Finish Mtg Hdw Pattern Controller
FAL/FALC CURVED
FALC 10-1 AA 1 - Surface Mount 1 2EB 20 - White/Black Mounting Brackets C - Combo

15-1.5 CC 6 - T-bar Lay in 2 1EB Screws S - Straight
20-2 2EC
25-2.5 1EC
30-3 MM
MO
OO

MODEL FTS (TEE SYSTEM)
The Formations Tee System is a versatile diffuser created from the
Formations Linear diffuser. Available in 24", 48" or 60" lengths,
with an integral plenum, the FTS ensures the diffuser fits tightly into
numerous ceiling suspension systems for a sleek, clean appearance.
A perfect choice for installation in an acoustical ceiling, the FTS is
easily repositioned, providing great flexibility.
Manufactured in pre-engineered lengths, the tee system is available in 1", 1 1/2 " and 2" slot widths.
Inlet Sizes 6", 8", 10" and 12"
Finish White Face, Black Interior
Applications 15/16" tee system, 9/16" tee system and 9/16" bolt slot tee system
Available with insulation model FTSI

LINEAR DIFFUSERS
AND GRILLES
LINEAR DIFFUSERS
FORMATIONS
FTS
Formations W (Width) Slots Standard available inlets

Unit
Models Slot Width 1 2T 2 Nominal Length Round Oval
FTS, FTS1-10, FTSB, FTSB1-10 1 2 3/4 6 15/16 5 1/8 24, 48, 60 6 8, 10, 12
FTS, FTS1-15, FTSB, FTSB1-15 1 1/2 3 3/4 8 15/16 7 1/8 24, 48, 60 6 8, 10, 12
FTS, FTS1-20, FTSB, FTSB1-20 2 4 3/4 10 15/16 9 1/8 24, 48, 60 6 8, 10, 12
SERIES FORMATIONS SPECIFICATIONS
MODELS FTS/FTSI data. Data shall be tested in accordance to ANSI/
Diffusers shall be models FTS/FTSI manufactured by ASHRAE Standard 70-2006.
METALAIRE. Units shall be constructed of heavy gauge
extruded aluminum. The units shall be available in Paint Specification
1", 1 1/2" and 2" widths. One and two slot units shall Process shall be anodic electro-deposition using an
be available. anodic acrylic paint. Units shall undergo pre-treatment
The diffusers shall be available in 24", 48" or 60".
The units shall be the size and quantity as outlined
in the plans and specifications.
LINEAR DIFFUSERS
AND GRILLES
Model Slot Width Border Style Inlet # of Slots Length Finish Mtg Hdw Pattern Controller Available Options
FTS 10-1 AA NI - No Inlet 1 24 20 - White/Black F6 C - Combo FODR Face Operated Damper
FTSI 15-1.5 06 2 48 F7 S - Straight ID Inlet Damper
20-2 08 60 ROD Remote Operated Damper
10 CC Closed Cell Insualtion
12 EI External Insulation
14
LINEAR DIFFUSERS
FORMATIONS
FTS

FORMATIONS PERFORMANCE DATA
1 SLOT STANDARD BLADE HORIZONTAL THROW WITH METALAIRE PLENUM
CFM 55 65 80 95 105 120 130 145
Ps .044 .067 .096 .129 .168 .212 .261 .315
2 ft. Pt .049 .074 .106 .144 .186 .235 .288 .349
NC - 19 24 27 30 33 35 37
Throw 5-7-11 6-9-12 7-9-13 8-10-14 9-11-15 9-11-16 10-12-17 10-13-18
One Slot 1" Slot Width
CFM 110 135 160 185 210 240 265 290

Horizontal Throw
6" Round Inlet
Ps .048 .075 .106 .144 .187 .235 .290 .350

4 ft. Pt .068 .104 .148 .199 .258 .329 .403 .486
NC 17 21 26 29 32 35 37 39
Throw 6-10-15 8-12-17 10-13-19 11-14-20 12-15-21 13-16-23 14-17-24 14-18-25
CFM 135 170 200 235 265 300 330 365
LINEAR DIFFUSERS
Ps .053 .082 .117 .158 .205 .259 .319 .384

AND GRILLES
5 ft. Pt .083 .129 .182 .247 .319 .405 .495 .600

NC 18 23 27 31 34 36 39 41
Throw 9-13-17 11-16-19 13-18-21 15-19-22 17-20-24 18-22-25 19-23-27 19-24-28
CFM 55 65 80 95 105 120 130 145
Ps .043 .056 .094 .126 .164 .207 .255 .307
2 ft. Pt .044 .068 .097 .132 .171 .215 .265 .320
NC 17 22 26 30 33 36 39
Throw 5-7-11 6-9-12 7-9-13 8-10-14 9-11-15 9-11-16 10-12-17 10-13-18
CFM 110 135 160 185 210 240 265 290

Horizontal Throw
LINEAR DIFFUSERS
8" Oval Inlet
Ps .047 .073 .104 .141 .183 .230 .283 .342

FORMATIONS
4 ft. Pt .054 .084 .119 .160 .208 .264 .324 .391

NC - 19 24 28 32 35 38 41
Throw 6-10-15 8-12-17 10-13-19 11-14-20 12-15-21 13-16-23 14-17-24 14-18-25
CFM 135 170 200 235 265 300 330 365
Ps .052 .080 .114 .155 .201 .253 .311 .376
5 ft. Pt .063 .097 .138 .187 .242 .306 .375 .453
NC - 20 25 30 34 37 40 42
Throw 9-13-17 11-16-19 13-18-21 15-19-22 17-20-24 18-22-25 19-23-27 19-24-28
FTS
CFM 55 70 90 110 125 145 160 180
Ps .026 .047 .073 .105 .143 .187 .236 .292
2 ft. Pt .031 .055 .086 .125 .168 .221 .278 .344
NC - 18 23 27 31 34 37 39
Throw 3-6-11 5-8-12 6-9-14 8-11-15 9-12-17 10-12-18 11-13-19 11-14-20
One Slot 1.5" Slot Width
CFM 110 145 180 215 250 290 325 360

Horizontal Throw
6" Round Inlet
Ps .029 .052 .081 .117 .159 .207 .262 .324

4 ft. Pt .049 .086 .133 .191 .260 .343 .433 .534
NC - 20 25 29 33 36 39 41
Throw 5-8-15 7-11-18 9-13-20 11-15-22 12-17-23 14-18-25 15-19-26 16-20-28
CFM 135 180 225 270 315 360 405 450
LINEAR DIFFUSERS
Ps .032 .057 .089 .128 .175 .228 .289 .356
AND GRILLES
5 ft. Pt .062 .109 .171 .246 .335 .438 .554 .684
NC 15 21 27 31 34 37 40 43
Throw 6-11-17 9-14-20 12-18-22 14-21-24 17-22-26 19-24-28 21-25-30 22-26-31
CFM 55 70 90 110 125 145 160 180
Ps .024 .042 .066 .094 .129 .168 .213 .262
2 ft. Pt .025 .045 .070 .102 .138 .180 .227 .281
NC - - 19 24 29 33 36 39
Throw 3-6-11 5-8-12 6-9-14 8-11-15 9-12-17 10-12-18 11-13-19 11-14-20
CFM 110 145 180 215 250 290 325 360

Horizontal Throw
LINEAR DIFFUSERS
8" Oval Inlet
Ps .026 .047 .073 .105 .143 .187 .236 .292
FORMATIONS
4 ft. Pt .033 .059 .092 .132 .179 .236 .298 .367
NC - - 21 26 31 35 38 41
Throw 5-8-15 7-11-18 9-13-20 11-15-22 12-17-23 14-18-25 15-19-26 16-20-28
CFM 135 180 225 270 315 360 405 450
Ps .029 .051 .080 .115 .157 .205 .260 .321
5 ft. Pt .039 .070 .110 .158 .215 .281 .355 .439
NC - 16 22 28 32 36 39 42
Throw 6-11-17 9-14-20 12-18-22 14-21-24 17-22-26 19-24-28 21-25-30 22-26-31
FTS

CFM 100 120 140 160 180 200 220 240
Ps .044 .063 .086 .112 .142 .176 .212 .253
2 ft. Pt .050 .072 .097 .127 .161 .199 .241 .286
NC - 18 23 27 30 33 36 38
Throw 6-9-15 7-11-16 8-12-17 10-13-19 11-14-20 12-15-21 13-15-22 13-16-23
CFM 200 240 280 320 360 400 440 480

Horizontal Throw
8" Oval Inlet
Ps .049 .070 .096 .125 .158 .195 .236 .281

4 ft. Pt .072 .104 .141 .184 .233 .288 .349 .415
NC 15 20 25 29 32 35 38 40
Throw 9-13-21 10-15-23 12-17-25 14-19-26 15-20-28 17-21-29 18-22-31 19-23-32
CFM 250 300 350 400 450 500 550 600
LINEAR DIFFUSERS
Ps .054 .077 .105 .137 .174 .215 .260 .309

AND GRILLES
5 ft. Pt .090 .130 .176 .230 .292 .360 .436 .518

NC 17 22 26 30 34 37 39 42
Throw 11-17-23 14-21-25 16-23-28 18-25-29 21-26-31 23-28-33 24-29-34 25-31-36
CFM 100 120 140 160 180 200 220 240
Ps .043 .062 .085 .111 .140 .173 .209 .249
2 ft. Pt .045 .065 .088 .115 .146 .180 .218 .259
NC - 17 22 26 30 33 36 38
Throw 6-9-15 7-11-16 8-12-17 10-13-19 11-14-20 12-15-21 13-15-22 13-16-23
CFM 200 240 280 320 360 400 440 480

Horizontal Throw
LINEAR DIFFUSERS
12" Oval Inlet
Ps .048 .069 .094 .123 .156 .192 .232 .276

FORMATIONS
4 ft. Pt .055 .079 .108 .141 .179 .221 .267 .318

NC - 19 24 28 32 35 38 40
Throw 9-13-21 10-15-23 12-17-25 14-19-26 15-20-28 17-21-29 18-22-31 19-23-32
CFM 250 300 350 400 450 500 550 600
Ps .053 .076 .103 .135 .171 .211 .256 .304
5 ft. Pt .064 .092 .125 .164 .207 .256 .310 .369
NC - 20 25 29 33 36 39 42
Throw 11-17-23 14-21-25 16-23-28 18-25-29 21-26-31 23-28-33 24-29-34 25-31-36
FTS
CFM 130 160 190 220 250 280 310 340
Ps .049 .075 .106 .142 .183 .229 .281 .338
2 ft. Pt .054 .082 .116 .156 .201 .253 .310 .372
NC - 16 22 27 31 34 37 39
Throw 7-10-17 9-13-19 10-14-20 12-15-22 13-16-23 14-17-25 15-18-26 16-19-27
CFM 260 320 380 440 500 560 620 680

Horizontal Throw
10" Oval Inlet
Ps .055 .083 .117 .157 .203 .255 .312 .376

4 ft. Pt .075 .114 .160 .215 .277 .348 .427 .513
NC - 18 24 29 33 36 39 41
Throw 10-15-24 12-18-26 14-20-29 17-22-31 19-23-33 20-25-35 21-26-37 22-27-38
CFM 325 400 475 550 625 700 775 850
LINEAR DIFFUSERS
Ps .060 .092 .129 .173 .223 .280 .344 .413
AND GRILLES
5 ft. Pt .092 .139 .196 .263 .339 .426 .522 .628
NC - 20 25 30 34 37 40 43
Throw 13-20-27 16-25-29 19-27-32 22-29-34 25-31-37 27-33-39 28-35-41 30-36-43
CFM 130 160 190 220 250 280 310 340
Ps .044 .066 .093 .125 .162 .203 .249 .299
2 ft. Pt .047 .071 .100 .134 .173 .217 .266 .320
NC - 16 22 27 31 34 37 39
Throw 7-10-17 9-13-19 10-14-20 12-15-22 13-16-23 14-17-25 15-18-26 16-19-27
CFM 260 320 380 440 500 560 620 680

Horizontal Throw
12" Oval Inlet
LINEAR DIFFUSERS
Ps .049 .074 .104 .139 .180 .225 .276 .332
FORMATIONS
4 ft. Pt .061 .092 .130 .174 .225 .282 .345 .415
NC - 18 24 29 33 36 39 41
Throw 10-15-24 12-18-26 14-20-29 17-22-31 19-23-33 20-25-35 21-26-37 22-27-38
CFM 325 400 475 550 625 700 775 850
Ps .053 .081 .114 .153 .198 .248 .304 .366
5 ft. Pt .072 .110 .155 .207 .268 .336 .412 .495
NC - 20 25 30 34 37 40 43
Throw 13-20-27 16-25-29 19-27-32 22-29-34 25-31-37 27-33-39 28-35-41 30-36-43
FTS

CFM 140 170 200 230 260 290 320 350
Ps .053 .078 .108 .143 .183 .227 .276 .331
2 ft. Pt .059 .087 .120 .159 .203 .252 .307 .367
NC - 16 21 25 29 33 35 38
Throw 7-10-17 8-13-19 10-15-21 11-16-22 13-17-24 14-18-25 15-19-26 16-19-28
CFM 280 340 400 460 520 580 640 700

Horizontal Throw
10" Oval Inlet
Ps .059 .087 .120 .159 .203 .252 .307 .368

4 ft. Pt .082 .121 .168 .222 .283 .352 .429 .513
NC - 18 23 27 31 35 37 40
Throw 10-15-25 12-18-27 14-21-29 16-22-32 18-24-34 20-25-35 21-26-37 22-28-39
CFM 350 425 500 575 650 725 800 875
LINEAR DIFFUSERS
Ps .065 .095 .132 .175 .223 .278 .338 .404

AND GRILLES
5 ft. Pt .101 .149 .206 .273 .349 .434 .528 .632

NC - 19 24 29 33 36 39 41
Throw 13-20-28 16-24-30 19-28-33 21-30-35 24-32-37 27-34-40 29-35-42 30-37-44
CFM 140 170 200 230 260 290 320 350
Ps .051 .075 .104 .137 .175 .218 .265 .317
2 ft. Pt .054 .080 .111 .146 .187 .233 .283 .339
NC - 16 21 25 29 33 35 38
Throw 7-10-17 8-13-19 10-15-21 11-16-22 13-17-24 14-18-25 15-19-26 16-19-28
CFM 280 340 400 460 520 580 640 700

Horizontal Throw
LINEAR DIFFUSERS
12" Oval Inlet
Ps .056 .083 .115 .152 .194 .242 .294 .352

FORMATIONS
4 ft. Pt .070 .104 .144 .190 .243 .302 .368 .440

NC - 18 23 27 31 35 37 40
Throw 10-15-25 12-18-27 14-21-29 16-22-32 18-24-344 20-25-35 21-26-37 22-28-39
CFM 350 425 500 575 650 725 800 875
Ps .062 .091 .127 .167 .214 .266 .324 .387
5 ft. Pt .084 .124 .171 .227 .290 .360 .439 .525
NC - 19 24 29 33 36 39 41
Throw 13-20-28 16-24-30 19-28-33 21-30-35 24-32-37 27-34-40 29-35-42 30-37-44
FTS
CFM 115 145 175 205 235 260 290 320
Ps .046 .072 .103 .140 .183 .232 .286 .346
2 ft. Pt .054 .084 .121 .165 .215 .271 .335 .405
NC - 16 22 27 31 35 38 40
Throw 7-11-16 9-13-18 11-14-19 12-15-21 13-16-22 14-17-24 14-18-25 15-19-26
Two Slot 1" Slot Width
CFM 235 290 350 410 465 525 580 640

Horizontal Throw
8" Oval Inlet
Ps .051 .080 .115 .156 .204 .257 .318 .384

4 ft. Pt .083 .129 .186 .254 .329 .418 .513 .622
NC - 18 24 29 33 37 40 42
Throw 10-15-22 12-18-25 15-19-28 17-21-30 18-22-32 19-24-34 20-25-35 21-26-37
CFM 295 365 440 510 585 655 730 800
LINEAR DIFFUSERS
Ps .056 .088 .126 .172 .224 .283 .349 .422
AND GRILLES
5 ft. Pt .107 .165 .239 .323 .423 .533 .660 .795
NC - 20 26 31 35 38 41 43
Throw 13-20-25 17-24-28 20-26-31 23-28-33 25-30-35 26-32-38 27-34-40 29-35-42
CFM 115 145 175 205 235 260 290 320
Ps .037 .058 .083 .112 .147 .185 .229 .276
2 ft. Pt .041 .064 .092 .125 .163 .205 .254 .307
NC - 16 22 27 31 35 38 40
Throw 7-11-16 9-13-18 11--14-19 12-15-21 13-16-22 14-17-24 14-18-25 15-19-26
CFM 235 290 350 410 465 525 580 640

Horizontal Throw
10" Oval Inlet
LINEAR DIFFUSERS
Ps .041 .064 .092 .125 .163 .206 .254 .307
FORMATIONS
4 ft. Pt .057 .089 .128 .175 .227 .288 .354 .429
NC - 18 24 29 33 37 40 42
Throw 10-15-22 12-18-25 15-19-28 17-21-30 18-22-32 19-24-34 20-25-35 21-26-37
CFM 295 365 440 510 585 655 730 800
Ps .045 .070 .101 .137 .179 .227 .279 .338
5 ft. Pt .071 .110 .159 .215 .281 .354 .438 .528
NC - 20 26 31 35 38 41 43
Throw 13-20-25 17-24-28 20-26-31 23-28-33 25-30-35 26-32-38 27-34-40 29-35-42
FTS

CFM 125 160 190 220 255 285 320 350
Ps .045 .071 .102 .140 .183 .232 .287 .347
2 ft. Pt .054 .086 .123 .168 .221 .279 .346 .419
NC - 17 23 28 32 36 39 41
Throw 6-9-17 8-12-18 9-14-20 11-15-22 12-17-23 14-18-25 15-19-26 16-19-28
Two Slot 1.5" Slot Width
CFM 250 315 380 445 510 570 635 700

Horizontal Throw
8" Oval Inlet
Ps .050 .079 .114 .155 .203 .258 .319 .386

4 ft. Pt .086 .136 .198 .271 .355 .447 .553 .671
NC - 19 25 30 34 38 41 43
Throw 9-13-23 11-16-26 13-20-29 15-22-31 18-23-33 20-25-35 21-26-37 22-28-39
CFM 315 395 475 555 635 715 795 875
LINEAR DIFFUSERS
Ps .055 .087 .125 .171 .224 .283 .350 .424

AND GRILLES
5 ft. Pt .113 .177 .256 .350 .458 .581 .718 .870

NC - 21 27 32 36 39 42 45
Throw 12-18-26 15-22-29 18-27-32 21-29-35 24-31-37 27-33-39 29-35-41 30-37-44
CFM 125 160 180 220 255 285 320 350
Ps .031 .049 .071 .098 .128 .162 .200 .243
2 ft. Pt .034 .054 .078 .106 .139 .177 .219 .265
NC - 17 22 28 32 35 38 41
Throw 6-9-17 8-12-18 9-14-20 11-15-22 12-17-23 14-18-25 15-19-26 16-19-28
CFM 250 315 380 445 510 570 635 700

Horizontal Throw
LINEAR DIFFUSERS
12" Oval Inlet
Ps .035 .055 .079 .108 .142 .180 .222 .270

FORMATIONS
4 ft. Pt .046 .073 .105 .144 .189 .238 .295 .358

NC - 19 24 30 34 37 40 43
Throw 9-13-23 11-16-26 13-20-29 15-22-31 18-23-33 20-25-35 21-26-37 22-29-39
CFM 315 395 475 555 635 715 795 875
Ps .038 .060 .087 .119 .156 .198 .245 .296
5 ft. Pt .056 .088 .128 .175 .229 .290 .358 .434
NC - 20 26 31 35 39 42 44
Throw 12-18-26 15-22-29 18-27-32 21-29-35 24-31-37 27-33-39 29-35-41 30-37-44
FTS
CFM 155 190 225 260 295 330 365 400
Ps .065 .097 .137 .183 .235 .294 .360 .432
2 ft. Pt .079 .118 .166 .222 .286 .357 .437 .525
NC - 16 21 26 30 33 36 38
Throw 9-13-18 11-14-20 13-16-22 14-17-24 15-18-25 15-19-27 16-20-28 17-21-29
CFM 310 380 450 520 590 560 730 800

Horizontal Throw
8" Oval Inlet
Ps .072 .108 .152 .203 .261 .327 .400 .480

4 ft. Pt .128 .192 .270 .360 .464 .580 .710 .853
NC - 18 23 28 32 35 38 40
Throw 9-14-26 11-17-29 14-20-31 16-23-34 18-25-36 20-27-38 22-28-40 24-29-42
CFM 390 475 565 650 740 825 915 1000
LINEAR DIFFUSERS
Ps .079 .119 .167 .223 .287 .359 .440 .528
AND GRILLES
5 ft. Pt .168 .250 .353 .469 .606 .756 .927 1.110
NC - 19 24 29 33 36 39 42
Throw 12-19-29 15-23-32 18-27-35 21-31-37 24-34-40 27-36-42 29-38-44 32-39-47
CFM 155 190 225 260 295 330 365 400
Ps .032 .048 .067 .089 .115 .143 .175 .211
2 ft. Pt .036 .054 .076 .101 .130 .163 .199 .239
NC - 16 21 26 30 33 36 38
Throw 6-10-18 8-12-20 10-14-22 11-17-24 13-18-25 14-19-27 16-20-28 17-21-29
CFM 310 380 450 520 590 660 730 800

Horizontal Throw
12" Oval Inlet
LINEAR DIFFUSERS
Ps .035 .053 .074 .099 .127 .159 .195 .234
FORMATIONS
4 ft. Pt .052 .079 .110 .147 .190 .238 .291 .349
NC - 18 23 28 32 35 38 40
Throw 9-14-26 11-17-29 14-20-31 16-23-34 18-25-36 20-27-38 22-28-40 24-29-42
CFM 390 475 565 650 740 825 915 1000
Ps .039 .058 .081 .109 .140 .175 .214 .257
5 ft. Pt .066 .099 .139 .185 .238 .297 .365 .437
NC - 19 24 29 33 36 39 42
Throw 12-19-29 15-23-32 18-27-35 21-31-37 24-34-40 27-36-42 29-38-44 32-39-47
FTS

CFM 210 255 300 345 390 430 475 520
Ps .061 .088 .122 .160 .203 .252 .306 .365
2 ft. Pt .074 .108 .148 .195 .248 .307 .373 .445
NC - 18 23 27 31 34 37 39
Throw 8-12-21 10-15-24 11-17-25 13-19-27 15-20-29 16-22-31 18-23-32 19-24-34
CFM 425 510 600 690 775 865 950 1040

Horizontal Throw
10" Oval Inlet
Ps .067 .098 .135 .178 .226 .280 .340 .406

4 ft. Pt .121 .176 .242 .319 .404 .502 .608 .727
NC - 20 25 29 33 36 39 41
Throw 11-17-30 14-21-33 16-24-36 19-27-39 21-29-41 23-31-43 26-32-45 27-34-47
CFM 530 640 750 860 970 1080 1190 1300
LINEAR DIFFUSERS
Ps .084 .123 .169 .222 .282 .350 .425 .507

AND GRILLES
5 ft. Pt .168 .245 .336 .442 .562 .696 .845 1.009

NC 16 21 26 31 35 38 41 43
Throw 15-23-34 18-28-37 22-32-40 25-37-43 28-39-46 31-41-48 34-43-51 37-45-53
CFM 210 255 300 345 390 430 475 520
Ps .038 .055 .076 .100 .127 .157 .191 .228
2 ft. Pt .046 .067 .092 .121 .154 .191 .232 .277
NC - 17 22 26 30 34 36 39
Throw 8-12-21 10-15-24 11-17-25 13-19-27 15-20-29 16-22-31 18-23-32 19-24-34
CFM 425 510 600 690 775 865 950 1040

Horizontal Throw
LINEAR DIFFUSERS
12" Oval Inlet
Ps .042 .061 .084 .111 .141 .175 .212 .254

FORMATIONS
4 ft. Pt .075 .108 .149 .196 .249 .309 .375 .448

NC - 19 24 28 32 36 38 41
Throw 11-17-30 14-21-33 16-24-36 19-27-39 21-29-41 23-31-43 26-32-45 27-34-47
CFM 530 640 750 860 970 1080 1190 1300
Ps .046 .068 .093 .122 .155 .192 .234 .279
5 ft. Pt .097 .141 .194 .255 .324 .402 .488 .583
NC - 20 26 30 34 37 40 42
Throw 15-23-34 18-28-37 22-32-40 25-37-43 28-39-46 31-41-48 34-43-51 37-45-53
FTS
CFM 195 240 280 320 365 405 450 490
Ps .027 .039 .054 .072 .092 .114 .139 .166
2 ft. Pt .038 .056 .078 .102 .131 .163 .199 .238
NC - 16 21 25 29 33 35 38
Throw 6-10-20 8-12-23 10-15-25 11-17-26 13-19-28 14-21-30 16-22-31 17-23-33
CFM 390 475 560 645 730 810 895 980

Horizontal Throw
10" Oval Inlet
Ps .030 .044 .060 .080 .102 .127 .155 .185

4 ft. Pt .075 .111 .154 .203 .260 .322 .392 .470
NC - 18 23 27 31 35 37 40
Throw 8-14-29 12-18-32 14-21-35 16-24-37 18-27-40 20-30-42 22-31-44 24-33-46
CFM 490 595 700 805 910 1015 1120 1225
LINEAR DIFFUSERS
Ps .041 .061 .085 .112 .143 .178 .216 .259
AND GRILLES
5 ft. Pt .113 .166 .230 .304 .389 .484 .589 .705
NC - 19 24 29 33 36 39 41
Throw 11-19-32 15-24-36 18-28-39 21-32-42 24-36-44 27-40-47 30-42-49 32-44-51
CFM 195 240 280 320 365 405 450 490
Ps .022 .032 .044 .058 .075 .093 .113 .135
2 ft. Pt .028 .042 .058 .077 .098 .122 .149 .178
NC - - 20 24 28 32 35 37
Throw 6-10-20 8-12-23 10-15-25 11-17-26 13-19-28 14-21-30 16-22-31 17-23-33
CFM 390 475 560 645 730 810 895 980

Horizontal Throw
12" Oval Inlet
LINEAR DIFFUSERS
Ps .024 .035 .049 .065 .083 .103 .125 .150
FORMATIONS
4 ft. Pt .051 .076 .105 .140 .179 .221 .269 .323
NC - 17 22 26 30 34 37 39
Throw 8-14-29 12-18-32 14-21-35 16-24-37 18-27-40 20-30-42 22-31-44 24-33-46
CFM 490 595 700 805 910 1015 1120 1225
Ps .026 .039 .054 .071 .091 .113 .138 .165
5 ft. Pt .070 .103 .142 .188 .240 .298 .363 .435
NC - 18 23 28 32 35 38 41
Throw 11-19-32 15-24-36 18-28-39 21-32-42 24-36-44 27-40-47 30-42-49 32-44-51
FTS

PRESSURIZED CEILING PLENUM WITH STANDARD BLADE PATTERN CONTROLLER
CFM 25 40 65 80 95 110 125 140
Ps .026 .066 .174 .264 .372 .499 .644 .808
1 Slot
NC - 16 31 37 42 45 48 51
1" Slot Width
Throw 6-9-15 10-13-19 14-17-24 15-19-26 17-20-29 18-22-31 19-23-33 20-25-35

CFM 40 60 100 120 145 165 190 210
Ps .017 .038 .105 .151 .221 .286 .379 .463
2 Slot
NC - - 26 32 38 41 45 47
Throw 7-10-19 10-15-23 17-21-29 19-23-32 20-25-35 22-27-38 23-29-41 25-30-43
CFM 30 50 80 95 115 130 150 170
Ps .026 .072 .184 .259 .380 .486 .647 .831
1 Slot
NC - 16 31 36 41 44 48 50
LINEAR DIFFUSERS
1.5" Slot Width
Throw 6-9-16 10-15-21 15-19-26 17-20-29 18-22-32 19-24-34 21-25-36 22-27-38

AND GRILLES
CFM 45 75 120 145 175 195 225 255

Ps .017 .048 .123 .179 .261 .324 .431 .553
2 Slot
NC - - 25 31 37 40 44 47
Throw 5-9-19 11-16-25 17-23-32 20-25-35 22-28-39 24-29-41 25-31-44 27-33-47
CFM 35 55 90 110 135 155 175 195
Ps .025 .062 .166 .248 .374 .493 .628 .780
1 Slot
NC - - 27 33 39 42 45 48
2" Slot Width
Throw 5-9-17 9-14-22 15-20-28 18-22-31 20-24-34 21-26-37 22-28-39 24-29-41

CFM 55 85 135 165 205 235 265 295
LINEAR DIFFUSERS
Ps .016 .039 .099 .148 .229 .301 .383 .474

2 Slot
FORMATIONS
NC - - 20 27 34 38 41 44
Throw 5-10-20 10-15-27 16-24-34 20-27-38 24-30-42 26-32-45 28-34-48 29-36-51
CFM 40 60 100 120 145 165 190 210
Ps .020 .045 .126 .181 .265 .343 .455 .556
1 Slot
NC - - 23 29 35 38 42 44
2.5" Slot Width
Throw 5-9-18 9-14-23 15-21-29 18-23-39 20-25-35 22-27-38 23-29-41 25-30-43

CFM 60 90 150 180 220 250 285 315
Ps .012 .026 .073 .105 .156 .202 .262 .320
2 Slot
NC - - 17 22 29 33 37 40
Throw 4-9-20 9-15-28 16-24-36 20-28-39 24-31-44 27-33-47 29-35-50 30-37-52
FTS
CFM 45 70 115 145 170 200 225 250

Ps .021 .051 .138 .219 .301 .416 .527 .650
1 Slot
NC - - 21 29 34 38 42 44
3" Slot Width
Throw 5-9-19 10-15-25 16-22-32 20-25-35 22-27-38 24-29-42 25-31-44 27-33-47

CFM 70 105 175 220 255 300 340 420
Ps .011 .025 .070 .111 .150 .207 .266 .406
2 Slot
NC - - 16 23 28 33 37 43
Throw 4-9-21 9-16-30 17-26-39 22-31-44 25-33-47 29-36-51 31-38-54 35-43-60
1 SLOT COMBO BLADE HORIZONTAL THROW WITH METALAIRE PLENUM
CFM 20 40 60 80 100 120 140 160
Ps .004 .018 .040 .071 .111 .159 .217 .283
2 ft. Pt .005 .020 .046 .081 .127 .182 .248 .324
NC - - 20 26 31 35 38 41
Throw 1-3-7 4-7-11 7-10-14 9-11-16 10-13-18 11-14-19 12-15-21 13-16-22
CFM 40 80 120 160 200 240 280 320

Horizontal Throw
6" Round Inlet
Ps .005 .020 .044 .079 .123 .177 .241 .314

4 ft. Pt .008 .030 .068 .120 .188 .270 .368 .480
NC - - 22 28 33 37 40 43
Throw 2-4-9 6-9-16 9-14-19 13-16-22 14-18-25 16-19-27 17-21-30 18-22-32
CFM 50 100 150 200 250 300 350 400
LINEAR DIFFUSERS
Ps .005 .022 .049 .086 .135 .195 .265 .346
AND GRILLES
5 ft. Pt .009 .038 .085 .151 .236 .340 .463 .605
NC - 16 23 29 34 38 42 45
Throw 2-5-11 8-13-18 13-18-22 17-21-25 19-24-28 21-26-31 23-28-33 24-30-35
CFM 20 40 60 80 100 120 140 160
Ps .003 .011 .025 .045 .070 .101 .137 .179
2 ft. Pt .003 .012 .027 .049 .076 .109 .149 .194
NC - - - 21 26 31 35 39
Throw 1-3-7 4-7-11 7-10-14 9-11-16 10-13-18 11-14-19 12-15-21 13-16-22
CFM 40 80 120 160 200 240 280 320

Horizontal Throw
LINEAR DIFFUSERS
8" Oval Inlet
Ps .003 .012 .028 .050 .078 .112 .152 .199
FORMATIONS
4 ft. Pt .004 .016 .036 .065 .101 .146 .198 .259
NC - - 17 23 28 33 37 41
Throw 2-4-9 6-9-16 9-14-19 13-16-22 14-18-25 16-19-27 17-21-30 18-22-32
CFM 50 100 150 200 250 300 350 400
Ps .003 .014 .031 55.000 .086 .123 .168 .219
5 ft. Pt .005 .020 .044 .078 .122 .176 .239 .312
NC - - 18 24 30 35 39 42
Throw 2-5-11 8-13-18 13-18-22 17-21-25 19-24-28 21-26-31 23-28-33 24-30-35
FTS

CFM 30 60 90 120 150 180 210 240
Ps .009 .035 .078 .139 .217 .313 .426 .557
2 ft. Pt .010 .041 .091 .162 .254 .366 .498 .650
NC - - 21 27 32 36 39 42
Throw 2-3-8 5-8-14 8-12-17 11-14-19 13-15-22 14-17-24 15-18-26 16-19-27
CFM 60 120 180 240 300 360 420 480

Horizontal Throw
6" Round Inlet
Ps .010 .039 .087 .155 .242 .348 .474 .619

4 ft. Pt .015 .062 .139 .248 .387 .558 .759 .991
NC - 16 23 29 34 38 41 44
Throw 2-5-12 8-12-19 12-17-24 15-19-27 18-22-31 19-24-34 21-26-36 22-27-39
CFM 75 150 225 300 375 450 525 600
LINEAR DIFFUSERS
Ps .011 .043 .096 .170 .266 .383 .521 .680

AND GRILLES
5 ft. Pt .020 .079 .178 .316 .493 .710 .967 1.263

NC - 17 25 30 35 39 43 46
Throw 3-7-13 10-16-22 16-23-27 21-26-31 24-29-34 26-32-38 28-34-41 30-37-43
CFM 30 60 90 120 150 180 210 240
Ps .006 .022 .050 .088 .138 .198 .270 .353
2 ft. Pt .006 .024 .054 .097 .151 .217 .296 .386
NC - - 16 22 28 32 37 40
Throw 2-3-8 5-8-14 8-12-17 11-14-19 13-15-22 14-17-24 15-18-26 16-19-27
CFM 60 120 180 240 300 360 420 480

Horizontal Throw
LINEAR DIFFUSERS
8" Oval Inlet
Ps .006 .024 .055 .098 .153 .220 .300 .392

FORMATIONS
4 ft. Pt .008 .033 .074 .131 .205 .296 .403 .526

NC - - 18 24 30 34 39 42
Throw 2-5-12 8-12-19 12-17-24 15-19-27 18-22-31 19-24-34 21-26-36 22-27-39
CFM 75 150 225 300 375 450 525 600
Ps .007 .027 .061 .108 .168 .242 .330 .431
5 ft. Pt .010 .040 .090 .160 .250 .360 .490 .640
NC - - 19 26 31 36 40 44
Throw 3-7-13 10-16-22 16-23-27 21-26-31 24-29-34 26-32-38 28-34-41 30-37-43
FTS
CFM 70 100 130 160 190 220 250 280
Ps .022 .044 .075 .113 .159 .213 .276 .346
2 ft. Pt .023 .047 .080 .121 .170 .228 .294 .369
NC - - 20 25 30 33 37 40
Throw 5-8-15 8-12-18 10-14-20 13-16-22 14-17-24 15-19-26 16-20-28 17-21-30
CFM 140 200 260 320 380 440 500 560

Horizontal Throw
10" Oval Inlet
Ps .024 .049 .083 .125 .177 .237 .306 .384

4 ft. Pt .030 .061 .103 .156 .220 .295 .381 .477
NC - 17 22 27 3 35 39 42
Throw 8-12-21 11-17-25 14-20-29 18-22-32 20-24-34 21-26-37 23-28-40 24-30-42
CFM 175 250 325 400 475 550 625 700
LINEAR DIFFUSERS
Ps .026 .054 .091 .138 .195 .261 .337 .423
AND GRILLES
5 ft. Pt .036 .072 .122 .186 .262 .351 .453 .568
NC - 18 24 29 33 37 40 43
Throw 10-16-23 15-22-28 19-27-32 24-30-35 27-33-39 29-35-41 31-38-44 32-40-47
CFM 70 100 130 160 190 220 250 280
Ps .020 .041 .069 .104 .147 .197 .255 .320
2 ft. Pt .021 .043 .072 .109 .154 .206 .266 .334
NC - - 20 25 30 33 37 40
Throw 5-8-15 8-12-18 10-14-20 13-16-22 14-17-24 15-19-26 16-20-28 17-21-30
CFM 140 200 260 320 380 440 500 560

Horizontal Throw
12" Oval Inlet
LINEAR DIFFUSERS
Ps .022 .045 .077 .116 .164 .219 .283 .355
FORMATIONS
4 ft. Pt .026 .052 .089 .134 .189 .254 .328 .412
NC - 17 22 27 32 35 39 42
Throw 8-12-21 11-17-25 14-20-29 18-22-32 20-24-34 21-26-37 23-38-40 24-30-42
CFM 175 250 325 400 475 550 625 700
Ps .024 .050 .084 .128 .180 .241 .311 .391
5 ft. Pt .030 .061 .103 .156 .220 .296 .382 .479
NC - 18 24 29 33 37 40 43
Throw 10-16-23 15-22-28 19-27-32 24-30-35 27-33-39 29-35-41 31-38-44 32-40-47
FTS

CFM 65 110 150 190 235 275 320 360
Ps .016 .042 .081 .133 .197 .274 .364 .467
2 ft. Pt .017 .046 .088 .143 .214 .297 .394 .505
NC - - 19 24 29 34 37 41
Throw 3-4-8 4-6-12 6-9-17 7-11-22 9-13-25 11-16-27 12-18-29 14-21-31
CFM 130 215 300 385 470 550 635 720

Horizontal Throw
10" Oval Inlet
Ps .017 .047 .090 .147 .219 .305 .404 .518

4 ft. Pt .022 .060 .117 .191 .285 .395 .524 .672
NC - - 21 26 31 36 39 43
Throw 4-5-11 6-9-18 8-12-24 10-16-31 13-19-35 15-23-38 17-26-41 20-29-44
CFM 165 270 375 480 585 690 795 900
LINEAR DIFFUSERS
Ps .019 .051 .099 .162 .241 .335 .445 .570

AND GRILLES
5 ft. Pt .027 .073 .141 .231 .343 .477 .633 .811

NC - 15 22 28 33 37 41 44
Throw 5-7-12 8-12-20 11-16-27 14-21-35 17-26-39 20-30-43 23-35-46 26-39-49
CFM 65 110 150 190 235 275 320 360
Ps .015 .040 .076 .125 .186 .259 .344 .440
2 ft. Pt .016 .042 .080 .132 .196 .272 .362 .464
NC - - 19 24 29 34 37 41
Throw 3-4-8 4-6-12 6-9-17 7-11-22 9-13-25 11-16-27 12-18-29 14-21-31
CFM 130 215 300 385 470 550 635 720

Horizontal Throw
LINEAR DIFFUSERS
12" Oval Inlet
Ps .016 .044 .085 .139 .207 .288 .382 .489

FORMATIONS
4 ft. Pt .019 .052 .101 .166 .246 .342 .454 .582

NC - - 21 26 31 36 39 43
Throw 4-5-11 6-9-18 8-12-24 10-16-31 13-19-35 15-23-38 17-26-41 20-29-44
CFM 165 270 375 480 585 690 795 900
Ps .018 .048 .093 .153 .227 .316 .420 .538
5 ft. Pt .023 .062 .119 .194 .289 .402 .533 .684
NC - 15 22 28 33 37 41 44
Throw 5-7-12 8-12-20 11-16-27 14-21-35 17-26-39 20-30-43 23-35-46 26-39-49
FTS
CFM 135 180 220 260 305 345 390 430
Ps .032 .055 .084 .119 .160 .207 .260 .320
2 ft. Pt .037 .064 .098 .139 .187 .242 .305 .374
NC - 18 23 28 31 35 38 40
Throw 5-7-14 6-9-19 8-12-23 9-14-26 11-16-28 12-18-30 14-20-32 15-23-34
CFM 270 355 440 525 610 690 775 860

Horizontal Throw
10" Oval Inlet
Ps .036 .061 .093 .132 .177 .230 .289 .355

4 ft. Pt .057 .098 .150 .214 .288 .371 .467 .575
NC - 20 25 30 33 37 40 42
Throw 7-10-20 9-13-26 11-16-33 13-19-37 15-23-40 1726-43 19-29-45 21-32-48
CFM 340 445 550 655 760 865 970 1075
LINEAR DIFFUSERS
Ps .039 .067 .102 .145 .195 .253 .318 .391
AND GRILLES
5 ft. Pt .073 .126 .192 .272 .367 .475 .597 .734
NC 16 22 27 31 35 38 41 44
Throw 9-14-23 12-18-30 15-22-37 17-26-42 20-30-45 23-35-48 26-39-51 29-43-53
CFM 135 180 220 260 305 345 390 430
Ps .030 .052 .079 .112 .151 .195 .246 .302
2 ft. Pt .033 .057 .088 .124 .167 .217 .273 .335
NC - 18 23 28 31 35 38 40
Throw 5-7-14 6-9-19 8-12-23 9-14-26 11-16-28 12-18-30 14-20-32 15-23-34
CFM 270 355 440 525 610 690 775 860

Horizontal Throw
12" Oval Inlet
LINEAR DIFFUSERS
Ps .034 .057 .088 .124 .167 .217 .273 .335
FORMATIONS
4 ft. Pt .047 .080 .122 .174 .234 .302 .381 .468
NC - 20 25 30 33 37 40 42
Throw 7-10-20 9-13-26 11-16-33 13-19-37 15-23-40 17-26-43 19-29-45 21-32-48
CFM 340 445 550 655 760 865 970 1075
Ps .037 .063 .096 .137 .184 .239 .300 .369
5 ft. Pt .058 .099 .151 .214 .288 .373 .469 .576
NC 16 22 27 31 35 38 41 44
Throw 9-14-23 12-18-30 15-22-37 17-26-42 20-30-45 23-35-48 26-39-51 29-43-53
FTS

1 SLOT COMBO BLADE VERTICAL THROW WITH METALAIRE PLENUM
CFM 70 110 155 200 240 285 325 370
Ps .009 .025 .048 .078 .116 .161 .213 .273
2 ft. Pt .012 .032 .062 .101 .149 .208 .275 .353
NC - 20 26 30 34 37 40 43
Throw 4-5-10 6-9-13 8-11-15 10-12-18 11-14-19 12-15-21 13-16-23 14-17-24
CFM 140 225 310 395 480 570 655 740

Vertical Throw
8" Oval Inlet
Ps .014 .036 .068 .112 .166 .230 .305 .390

4 ft. Pt .025 .065 .124 .203 .300 .419 .555 .709
NC - 22 28 32 36 39 42 45
Throw 5-8-15 8-13-19 12-15-22 14-18-25 16-19-27 17-21-30 18-23-32 20-24-4
CFM 175 280 390 495 605 710 820 925
LINEAR DIFFUSERS
Ps .018 .046 .089 .145 .215 .299 .396 .507

AND GRILLES
5 ft. Pt .035 .092 .178 .288 .428 .592 .788 1.005

NC 15 23 29 34 38 41 44 46
Throw 7-10-16 11-17-21 15-21-24 19-23-28 21-26-31 23-28-33 25-30-36 26-32-38
CFM 70 110 155 200 240 285 325 370
Ps .012 .031 .060 .097 .144 .200 .204 .340
2 ft. Pt .013 .035 .067 .109 .161 .225 .223 .381
NC - 17 22 26 29 32 33 36
Throw 4-5-10 6-9-13 8-11-15 10-12-18 11-14-19 12-15-21 13-16-23 14-17-24
CFM 140 225 310 395 480 570 655 740

Vertical Throw
LINEAR DIFFUSERS
10" Oval Inlet
Ps .017 .045 .085 .139 .206 .286 .291 .486

FORMATIONS
4 ft. Pt .023 .060 .114 .186 .275 .383 .368 .649

NC - 19 24 28 31 34 35 38
Throw 5-8-15 8-13-19 12-15-22 14-18-25 16-19-27 17-21-30 18-23-32 20-24-34
CFM 175 280 390 495 605 710 820 925
Ps .022 .058 .111 .181 .268 .372 .379 .632
5 ft. Pt .031 .081 .156 .254 .377 .522 .500 .886
NC - 20 26 30 33 35 36 40
Throw 7-10-16 11-17-21 15-21-24 19-23-28 21-26-31 23-28-33 25-30-36 26-32-38
FTS
CFM 70 110 155 200 240 285 325 370
Ps .009 .024 .046 .075 .111 .154 .204 .261
2 ft. Pt .010 .026 .050 .082 .121 .168 .223 .286
NC - - 18 23 27 30 33 35
Throw 4-5-10 6-9-13 8-11-15 10-12-18 11-14-19 12-15-21 13-16-23 14-17-24
CFM 140 225 310 395 480 570 655 740

Vertical Throw
12" Oval Inlet
Ps .013 .034 .065 .107 .158 .220 .291 .373

4 ft. Pt .016 .043 .083 .135 .200 .278 .368 .471
NC - - 20 25 29 32 35 37
Throw 5-8-15 8-13-19 12-15-22 14-18-25 16-19-27 17-21-30 18-23-32 20-24-34
CFM 175 280 390 495 605 710 820 925
LINEAR DIFFUSERS
Ps .017 .044 .085 .139 .206 .286 .379 .485
AND GRILLES
5 ft. Pt .022 .059 .112 .183 .272 .376 .500 .639
NC - 16 22 27 30 33 36 38
Throw 7-10-16 11-17-21 15-21-24 19-23-28 21-26-31 23-28-33 25-30-36 26-32-38
CFM 80 140 200 260 320 380 440 500
Ps .012 .037 .075 .127 .192 .270 .363 .468
2 ft. Pt .016 .048 .098 .166 .251 .354 .475 .614
NC - 18 25 30 34 37 40 42
Throw 3-5-10 6-9-15 9-12-18 11-14-20 13-16-22 14-17-24 15-18-26 16-20-28
CFM 160 280 400 520 640 760 880 1000

Vertical Throw
LINEAR DIFFUSERS
8" Oval Inlet
Ps .017 .052 .107 .181 .274 .386 .518 .669
FORMATIONS
4 ft. Pt 0.032 0.098 0.2 0.338 0.512 0.723 0.969 1.251
NC - 20 27 32 36 39 42 44
Throw 5-7-15 9-13-21 12-18-25 16-20-28 18-22-31 20-24-34 21-26-37 23-28-39
CFM 200 350 500 650 800 950 1100 1250
Ps .022 .068 .139 .235 .356 .502 .673 .869
5 ft. Pt .046 .139 .285 .481 .729 1.028 1.378 1.779
NC - 22 28 39 37 40 43 46
Throw 7-10-16 11-17-23 16-24-28 21-27-32 24-30-35 27-33-38 29-35-41 30-37-44
FTS

CFM 80 140 200 260 320 380 440 500
Ps .008 .026 .052 .088 .134 .189 .253 .326
2 ft. Pt .010 .031 .064 .108 .164 .231 .310 .401
NC - 15 21 26 29 32 34 36
Throw 3-5-10 6-9-15 9-12-18 11-14-20 13-16-22 14-17-24 15-18-26 16-20-28
CFM 160 280 400 520 640 760 880 1000

Verticall Throw
10" Oval Inlet
Ps .012 .037 .075 .126 .191 .269 .361 .466

4 ft. Pt .020 .060 .122 .206 .313 .441 .591 .763
NC - 17 23 28 31 34 36 38
Throw 5-7-15 9-13-21 12-18-25 16-20-28 18-22-31 20-24-34 21-26-37 23-28-39
CFM 200 350 500 650 800 950 1100 1250
LINEAR DIFFUSERS
Ps .016 .048 .097 .164 .248 .350 .469 .606

AND GRILLES
5 ft. Pt .027 .084 .171 .289 .438 .618 .829 1.070

NC - 19 25 29 32 35 37 40
Throw 7-10-16 11-17-23 16-24-28 21-27-32 24-30-35 27-33-38 29-35-41 30-37-44
CFM 80 140 200 260 320 380 440 500
Ps .006 .020 .040 .068 .103 .145 .194 .250
2 ft. Pt .008 .023 .047 .080 .121 .170 .229 .295
NC - - 17 22 26 30 32 35
Throw 3-5-10 6-9-15 9-12-18 11-14-20 13-16-22 14-17-24 15-18-26 16-20-28
CFM 160 280 400 520 640 760 880 1000

Vertical Throw
LINEAR DIFFUSERS
12" Oval Inlet
Ps .009 .028 .057 .097 .146 .206 .277 .358

FORMATIONS
4 ft. Pt .014 .042 .086 .145 .220 .310 .416 .537

NC - - 19 24 28 32 34 37
Throw 5-7-15 9-13-21 12-18-25 16-20-28 18-22-31 20-24-34 21-26-37 23-28-39
CFM 200 350 500 650 800 950 1100 1250
Ps .012 .036 .074 .126 .190 .268 .360 .465
5 ft. Pt .019 .058 .119 .202 .305 .431 .577 .746
NC - - 21 26 30 33 36 38
Throw 7-10-16 11-17-23 16-24-28 21-27-32 24-30-35 27-33-38 29-35-41 30-37-44
FTS
CFM 70 125 180 235 290 350 405 460
Ps .007 .024 .051 .088 .134 .191 .257 .333
2 ft. Pt .010 .033 .070 .120 .183 .262 .353 .456
NC - 19 25 31 35 38 41 44
Throw 2-3-7 4-6-12 6-9-18 8-12-22 10-15-24 12-17-26 13-20-28 15-21-30
CFM 135 250 360 470 585 695 810 920

Vertical Throw
8" Oval Inlet
Ps .010 .035 .073 .125 .192 .272 .367 .476

4 ft. Pt .021 .071 .148 .254 .391 .554 .749 .969
NC - 21 27 33 37 40 43 46
Throw 3-5-10 6-9-18 8-13-25 11-17-31 14-21-34 16-25-37 19-28-40 22-30-43
CFM 170 310 450 590 730 870 1010 1150
LINEAR DIFFUSERS
Ps .014 .045 .095 .163 .249 .354 .477 .619
AND GRILLES
5 ft. Pt .030 .101 .213 .366 .560 .795 1.071 1.389
NC - 22 29 34 38 41 44 47
Throw 4-6-11 8-12-20 11-17-28 15-22-34 18-28-38 22-33-42 26-38-45 29-41-48
CFM 70 125 180 235 290 350 405 460
Ps .006 .020 .041 .071 .109 .155 .209 .271
2 ft. Pt .007 .024 .051 .088 .134 .191 .258 .334
NC - 15 22 26 30 32 35 37
Throw 2-3-7 4-6-12 6-9-18 8-12-22 10-15-24 12-17-26 13-20-28 15-21-30
CFM 135 250 360 470 585 695 810 920

Vertical Throw
10" Oval Inlet
Ps .008 .028 .059 .102 .156 .221 .298 .387

4 ft. Pt .014 .047 .098 .167 .257 .365 .493 .638
LINEAR DIFFUSERS
NC - 17 24 28 32 34 37 39
FORMATIONS
Throw 3-5-10 6-9-18 8-13-25 11-17-31 14-21-34 16-25-37 19-28-40 22-30-43
CFM 170 310 450 590 730 870 1010 1150
Ps .011 .037 .077 .132 .203 .288 .388 .503
5 ft. Pt .020 .065 .137 .236 .361 .513 .691 .896
NC - 19 25 30 33 36 38 41
Throw 4-6-11 8-12-20 11-17-28 15-22-34 18-28-38 22-33-42 26-38-45 29-41-48
CFM 70 125 180 235 290 350 405 460
Ps .004 .012 .026 .044 .067 .095 .129 .167
2 ft. Pt .005 .015 .031 .054 .082 .117 .158 .205
NC - - 18 23 27 31 33 36
Throw 2-3-7 4-6-12 6-9-18 8-12-22 10-15-24 12-17-26 13-20-28 15-21-30
FTS
CFM 135 250 360 470 585 695 810 920

Vertical Throw
12" Oval Inlet
Ps .005 .017 .036 .063 .096 .136 .184 .238

4 ft. Pt .008 .029 .060 .102 .157 .223 .302 .390
NC - - 20 25 29 33 35 38
Throw 3-5-10 6-9-18 8-13-25 11-17-31 14-21-34 16-25-37 19-28-40 22-30-43
CFM 170 310 450 590 730 870 1010 1150
Ps .007 .022 .047 .081 .125 .177 .239 .309
5 ft. Pt .012 .040 .084 .144 .220 .313 .422 .547
NC - - 22 27 31 34 37 39
Throw 4-6-11 8-12-20 11-17-28 15-22-34 18-28-38 22-33-42 26-38-45 29-41-48

CFM 195 290 385 480 575 670 765 860
Ps .017 .037 .065 .101 .145 .196 .256 .324
2 ft. Pt .023 .052 .091 .142 .204 .277 .361 .456
NC - 22 27 32 35 38 40 42
Throw 6-9-18 9-13-24 12-18-28 15-22-31 17-24-34 20-26-37 23-28-39 24-29-41
CFM 390 580 770 960 1150 1340 1530 1720

Vertical Throw
12" Oval Inlet
Ps .024 .053 .093 .144 .207 .281 .366 .462

4 ft. Pt .051 .113 .199 .310 .444 .603 .786 .994
NC 17 24 29 34 37 40 42 44
Throw 8-13-25 12-19-34 17-25-39 21-31-44 25-34-48 29-37-52 32-39-55 34-41-59
CFM 490 725 965 1200 1440 1675 1915 2150
LINEAR DIFFUSERS
Ps .031 .068 .120 .187 .269 .365 .475 .601

AND GRILLES
5 ft. Pt .074 .163 .288 .446 .641 .869 1.134 1.432

NC 18 25 31 35 38 41 43 45
Throw 11-17-28 17-25-38 22-33-44 28-42-49 33-45-54 39-49-58 43-52-62 45-56-66
CFM 195 290 385 480 575 670 765 860
Ps .015 .033 .058 .090 .130 .176 .229 .290
2 ft. Pt .022 .048 .085 .132 .189 .257 .335 .423
NC - - 20 24 28 31 33 35
Throw 6-9-18 9-13-24 12-18-28 15-22-31 17-24-34 20-26-37 23-29-39 24-29-41
CFM 390 580 770 960 1150 1340 1530 1720

Vertical Throw
LINEAR DIFFUSERS
12" Oval Inlet
Ps .021 .047 .083 .129 .185 .251 .328 .414

FORMATIONS
4 ft. Pt .049 .108 .190 .295 .423 .574 .748 .946

NC - 17 22 26 30 33 35 37
Throw 8-13-25 12-19-34 17-25-39 21-31-44 25-34-48 29-37-52 32-39-55 34-41-59
CFM 490 725 965 1200 1440 1675 1915 2150
Ps .028 .061 .108 .168 .241 .327 .426 .538
5 ft. Pt .071 .156 .275 .426 .613 .831 1.085 1.369
NC - 18 24 28 31 34 37 39
Throw 11-17-28 17-25-38 22-33-44 28-42-49 33-45-54 39-49-58 43-52-62 45-56-66
FTS
CFM 110 145 180 215 250 290 325 360
Ps .037 .065 .102 .147 .200 .261 .331 .408
2 ft. Pt .044 .078 .121 .174 .236 .310 .392 .484
NC - 17 22 26 30 34 37 40
Throw 6-10-15 9-13-18 11-14-20 13-15-22 14-17-24 15-18-25 15-19-27 16-20-28
CFM 215 290 360 430 505 575 550 720

Horizontal Throw
8" Oval Inlet
Ps .041 .073 .113 .163 .222 .290 .367 .454

4 ft. Pt .068 .122 .189 .271 .371 .483 .613 .755
NC - 19 24 28 32 36 39 42
Throw 9-14-22 12-18-25 15-20-28 18-22-31 19-24-33 21-25-36 22-27-38 23-28-40
CFM 270 360 450 540 630 720 810 900
LINEAR DIFFUSERS
Ps .045 .080 .125 .180 .244 .319 .404 .499
AND GRILLES
5 ft. Pt .087 .155 .243 .349 .476 .621 .786 .971
NC - 20 25 30 34 37 40 43
Throw 12-18-24 16-24-28 21-27-32 24-29-35 26-32-37 28-34-40 29-36-42 31-38-45
CFM 110 145 180 215 250 290 325 360
Ps .033 .058 .091 .131 .179 .233 .295 .365
2 ft. Pt .036 .065 .101 .145 .197 .258 .327 .403
NC - 17 22 26 30 34 37 40
Throw 6-10-15 9-13-18 11-14-20 13-15-22 14-17-24 15-18-25 15-19-27 16-20-28
CFM 215 290 360 430 505 575 550 720

Horizontal Throw
10" Oval Inlet
LINEAR DIFFUSERS
Ps .036 .065 .101 .146 .198 .259 .328 .405
FORMATIONS
4 ft. Pt .050 .090 .140 .201 .274 .357 .454 .559
NC - 19 24 28 32 36 39 42
Throw 9-14-22 12-18-25 15-20-28 18-22-31 19-24-33 21-25-36 22-27-38 23-28-40
CFM 270 360 450 540 530 720 810 900
Ps .040 .071 .111 .160 .218 .285 .361 .446
5 ft. Pt .062 .110 .172 .247 .336 .439 .556 .686
NC - 20 25 30 34 37 40 43
Throw 12-18-24 16-24-28 21-27-32 24-29-35 26-32-37 28-34-40 29-36-42 31-38-45
FTS

CFM 95 125 155 185 215 250 280 310
Ps .018 .033 .051 .073 .100 .130 .165 .203
2 ft. Pt .024 .042 .065 .093 .127 .166 .210 .259
NC - 17 22 27 31 34 37 40
Throw 4-7-14 6-9-17 8-11-18 9-14-20 11-15-22 12-17-23 14-18-25 15-18-26
CFM 185 250 310 370 435 495 560 620

Horizontal Throw
8" Oval Inlet
Ps .020 .036 .056 .081 .111 .145 .183 .226

4 ft. Pt .040 .073 .112 .161 .221 .287 .366 .450
NC - 19 24 29 33 36 39 42
Throw 5-10-19 9-13-23 11-16-26 13-19-29 15-22-31 17-23-33 19-25-35 21-26-37
CFM 235 310 390 465 545 620 700 775
LINEAR DIFFUSERS
Ps .022 .040 .062 .089 .122 .159 .201 .248

AND GRILLES
5 ft. Pt .055 .096 .151 .215 .295 .383 .486 .598

NC 15 21 26 30 34 38 41 43
Throw 7-13-22 12-17-26 14-22-29 17-26-32 20-29-35 23-31-37 26-33-39 29-35-41
CFM 95 125 155 185 215 250 280 310
Ps .017 .030 .047 .068 .092 .120 .152 .188
2 ft. Pt .019 .033 .051 .074 .100 .132 .166 .205
NC - 17 22 26 30 34 37 39
Throw 4-7-14 6-9-17 8-11-18 9-14-20 11-15-22 12-17-23 14-18-25 15-18-26
CFM 185 250 310 370 435 495 560 620

Horizontal Throw
LINEAR DIFFUSERS
12" Oval Inlet
Ps .019 .033 .052 .075 .102 .134 .169 .209

FORMATIONS
4 ft. Pt .025 .045 .070 .100 .136 .178 .226 .278

NC - 19 24 28 32 36 39 41
Throw 5-10-19 9-13-23 11-16-26 13-19-29 15-22-31 17-23-33 19-25-35 21-26-37
CFM 235 310 390 465 545 620 700 775
Ps .021 .037 .057 .083 .113 .147 .186 .230
5 ft. Pt .031 .054 .085 .122 .166 .216 .274 .338
NC - 20 25 30 34 37 40 43
Throw 7-13-22 12-17-26 14-22-29 17-26-32 20-29-35 23-31-37 26-33-39 29-35-41
FTS
CFM 100 140 175 210 250 285 325 360
Ps .015 .028 .044 .065 .090 .119 .151 .188
2 ft. Pt .021 .039 .062 .091 .126 .166 .213 .264
NC - 17 22 27 31 35 38 41
Throw 6-9-15 8-12-17 11-14-20 12-15-22 14-17-23 14-18-25 15-19-27 16-20-28
CFM 200 275 350 425 500 570 645 720

Horizontal Throw
8" Oval Inlet
Ps .016 .031 .049 .072 .100 .132 .168 .209

4 ft. Pt .040 .075 .121 .178 .246 .321 .410 .511
NC - 19 24 29 33 37 40 43
Throw 4-9-18 7-12-25 11-16-28 13-19-31 15-22-33 17-25-36 19-27-38 22-2840
CFM 255 345 440 530 625 715 810 900
LINEAR DIFFUSERS
Ps .018 .034 .054 .080 .110 .145 .185 .230
AND GRILLES
5 ft. Pt .056 .103 .167 .243 .337 .443 .567 .701
NC - 20 26 30 34 38 41 44
Throw 5-12-20 10-17-28 14-21-31 17-26-34 20-30-37 23-34-40 26-36-42 29-38-45
CFM 100 140 175 210 250 285 325 360
Ps .013 .024 .039 .057 .079 .104 .133 .165
2 ft. Pt .015 .028 .044 .065 .090 .119 .152 .188
NC - 17 22 27 31 35 38 41
Throw 3-6-13 5-9-17 7-11-20 9-14-22 11-16-23 12-18-25 14-19-27 15-20-28
CFM 200 275 350 425 500 570 645 720

Horizontal Throw
12" Oval Inlet
LINEAR DIFFUSERS
Ps .014 .027 .043 .063 .088 .116 .147 .183
FORMATIONS
4 ft. Pt .022 .040 .065 .096 .132 .174 .222 .276
NC - 19 24 29 33 37 40 43
Throw 4-9-18 7-12-25 11-16-28 13-19-31 15-22-33 17-25-36 19-27-38 22-28-40
CFM 255 345 440 530 625 715 810 900
Ps .016 .030 .048 0.07 .090 .127 .162 .201
5 ft. Pt .028 .051 .082 0.12 .167 .219 .280 .347
NC - 20 26 30 34 38 41 44
Throw 5-12-20 10-17-28 14-21-31 17-26-34 20-30-37 23-34-40 26-36-42 29-38-45
FTS

CFM 140 185 230 275 320 370 415 460
Ps .015 .027 .042 .061 .083 .108 .137 .169
2 ft. Pt .021 .037 .058 .083 .113 .140 .188 .232
NC - 17 22 26 30 33 37 39
Throw 4-8-16 6-11-20 9-13-23 11-16-25 12-18-27 14-20-28 16-21-30 18-23-32
CFM 275 370 460 550 645 735 830 920

Horizontal Throw
10" Oval Inlet
Ps .017 .030 .047 .068 .092 .120 .152 .188

4 ft. Pt .039 .071 .110 .157 .216 .281 .357 .439
NC - 19 24 28 32 35 39 41
Throw 5-11-22 9-15-28 12-19-32 15-22-35 17-26-38 20-28-40 22-30-43 25-32-45
CFM 345 460 575 690 805 920 1035 1150
LINEAR DIFFUSERS
Ps .019 .033 .052 .074 .101 .132 .167 .207

AND GRILLES
5 ft. Pt .054 .096 .150 .216 .294 .384 .486 .599

NC - 20 25 30 33 37 40 43
Throw 7-15-25 12-20-32 17-25-36 20-30-39 23-35-42 27-38-45 30-41-48 33-43-50
CFM 140 185 230 275 320 370 415 460
Ps .014 .025 .039 .056 .076 .099 .125 .155
2 ft. Pt .017 .031 .048 .069 .094 .124 .156 .193
NC - 16 21 25 29 32 35 38
Throw 4-8-16 6-11-20 9-13-23 11-16-25 12-18-27 14-20-28 16-21-30 18-23-32
CFM 275 370 460 550 645 735 830 920

Horizontal Throw
LINEAR DIFFUSERS
12" Oval Inlet
Ps .015 .028 .043 .062 .084 .110 .139 .172

FORMATIONS
4 ft. Pt .029 .052 .081 .116 .159 .207 .263 .324

NC - 18 23 27 31 34 37 40
Throw 5-11-22 9-15-28 12-19-32 15-22-35 17-26-38 20-28-40 22-30-43 25-32-45
CFM 345 460 575 690 805 920 1035 1150
Ps .017 .030 .047 .068 .093 .121 .153 .189
5 ft. Pt .038 .068 .107 .154 .209 .273 .346 .427
NC - 19 24 28 32 36 39 42
Throw 7-15-25 12-20-32 17-25-36 20-30-39 23-35-42 27-38-45 30-41-48 33-43-50
FTS
CFM 150 200 250 300 350 400 450 500
Ps .015 .027 .042 .061 .083 .108 .137 .169
2 ft. Pt .022 .039 .061 .087 .119 .156 .197 .243
NC - 17 22 26 30 34 37 40
Throw 3-7-16 6-10-21 9-13-23 10-16-26 12-18-28 14-21-30 16-22-32 17-23-33
CFM 300 400 500 600 700 800 900 1000

Horizontal Throw
10" Oval Inlet
Ps .017 .030 .047 .068 .092 .120 .152 .188

4 ft. Pt .044 .078 .121 .174 .237 .310 .392 .485
NC - 19 24 28 32 36 39 42
Throw 5-10-22 8-15-29 12-18-33 15-22-36 17-26-39 20-29-42 22-32-45 25-33-53
CFM 375 500 625 750 875 1000 1125 1250
LINEAR DIFFUSERS
Ps .019 .033 .052 .074 .101 .132 .167 .206
AND GRILLES
5 ft. Pt .060 .107 .168 .241 .328 .429 .543 .670
NC - 20 25 30 34 37 40 43
Throw 6-14-25 11-20-33 16-25-37 20-30-41 23-35-44 26-40-47 30-42-50 33-45-53
CFM 150 200 250 300 350 400 450 500
Ps .014 .026 .040 .058 .079 .103 .130 .160
2 ft. Pt .018 .033 .051 .074 .101 .131 .166 .205
NC - 16 21 25 29 32 35 38
Throw 3-7-16 6-10-21 9-13-23 10-16-26 12-18-28 14-21-30 16-22-32 17-23-33
CFM 300 400 500 600 700 800 900 1000

Horizontal Throw
12" Oval Inlet
LINEAR DIFFUSERS
Ps .016 .029 .045 .064 .087 .114 .144 .178
FORMATIONS
4 ft. Pt .032 .057 .089 .129 .175 .229 .290 .358
NC - 18 23 27 31 34 37 40
Throw 5-10-22 8-15-29 12-18-33 15-22-36 17-26-39 20-29-42 22-32-45 25-33-47
CFM 375 500 625 750 875 1000 1125 1250
Ps .018 .031 .049 .071 .096 .125 .159 .196
5 ft. Pt .043 .076 .119 .172 .234 .305 .386 .477
NC - 19 24 29 32 36 39 42
Throw 6-14-25 11-20-33 16-25-37 20-30-41 23-35-44 26-40-47 30-42-50 33-45-53
FTS

CFM 95 150 205 260 315 370 425 480
Ps .013 .032 .059 .095 .139 .192 .253 .323
2 ft. Pt .018 .045 .083 .134 .197 .271 .358 .457
NC - 20 25 30 33 36 39 42
Throw 3-4-8 4-6-13 6-9-17 7-11-22 9-13-27 10-16-30 12-18-32 14-20-34
CFM 190 300 410 520 630 740 850 960

Vertical Throw
8" Oval Inlet
Ps .018 .045 .084 .135 .198 .274 .361 .461

4 ft. Pt .039 .097 .182 .293 .430 .593 .782 .997
NC - 22 27 32 35 38 41 44
Throw 4-6-11 6-9-18 8-12-25 10-16-31 13-19-38 15-22-42 17-26-45 19-29-48
CFM 240 375 515 650 790 925 1065 1200
LINEAR DIFFUSERS
Ps .023 .059 .109 .176 .258 .356 .470 .599

AND GRILLES
5 ft. Pt .057 .140 .264 .422 .621 .540 1.130 1.437

NC 15 23 29 33 37 40 43 45
Throw 5-8-13 8-12-20 11-17-28 14-21-35 17-25-42 20-30-47 23-34-51 26-39-54
CFM 95 150 205 260 315 370 425 48
Ps .007 .018 .034 .055 .081 .111 .147 .187
2 ft. Pt .010 .025 .047 .075 .110 .152 .200 .256
NC - 16 22 26 29 31 33 35
Throw 3-4-8 4-6-13 6-9-17 7-11-22 9-13-27 10-16-30 12-18-32 14-20-34
CFM 190 300 410 520 630 740 850 960

Vertical Throw
LINEAR DIFFUSERS
10" Oval Inlet
Ps .010 .026 .049 .078 .115 .159 .210 .267

FORMATIONS
4 ft. Pt .021 .053 .099 .159 .233 .321 .424 .541

NC - 18 24 28 31 33 35 37
Throw 4-6-11 6-9-18 8-12-25 10-16-31 13-19-38 15-22-42 17-26-45 19-29-48
CFM 240 375 515 650 790 925 1065 1200
Ps .014 .034 .063 .102 .150 .206 .272 .347
5 ft. Pt .031 .076 .142 .227 .335 .461 .609 .775
NC - 20 25 29 32 35 37 39
Throw 5-8-13 8-12-20 11-17-28 14-21-35 17-25-42 20-30-47 23-34-51 26-39-54
FTS
CFM 95 150 205 260 315 370 425 480
Ps .009 .022 .041 .066 .097 .134 .177 .226
2 ft. Pt .010 .026 .049 .078 .115 .159 .209 .267
NC - - 18 22 26 29 32 34
Throw 3-4-8 4-6-13 6-9-17 7-11-22 9-13-27 10-16-30 12-18-32 14-20-34
CFM 190 300 410 520 630 740 850 960

Vertical Throw
12" Oval Inlet
Ps .013 .032 .059 .095 .139 .192 .253 .323

4 ft. Pt .019 .048 .089 .143 .210 .290 .383 .488
NC - - 20 24 28 31 34 36
Throw 4-6-11 6-9-18 8-12-25 10-16-31 13-19-38 15-22-42 17-26-45 19-29-48
CFM 240 375 515 650 790 925 1065 1200
LINEAR DIFFUSERS
Ps .016 .041 .076 .123 .181 .249 .329 .419
AND GRILLES
5 ft. Pt .027 .066 .124 .199 .293 .403 .533 .678
NC - 16 21 26 29 33 35 37
Throw 5-8-13 8-12-20 11-17-28 14-21-35 17-25-42 20-30-47 23-34-51 26-39-54
CFM 195 310 420 530 645 755 870 980
Ps .027 .066 .123 .198 .290 .400 .527 .672
2 ft. Pt .049 .122 .226 .362 .533 .732 .968 1.231
NC - 20 26 30 34 37 40 42
Throw 5-7-14 7-11-21 10-15-29 12-18-36 15-22-39 18-26-43 20-30-46 23-34-49
CFM 390 615 840 1065 1290 1510 1735 1960

Vertical Throw
LINEAR DIFFUSERS
8" Oval Inlet
Ps .038 .095 .176 .283 .415 .572 .753 .960
FORMATIONS
4 ft. Pt .127 .315 .587 .943 1.384 1.899 2.506 3.197
NC - 22 28 32 36 39 42 44
Throw 6-10-19 10-15-30 14-21-41 17-26-51 21-32-56 25-37-60 28-43-65 32-48-69
CFM 490 770 1050 1330 1610 1890 2170 2450
Ps .050 .123 .229 .368 .539 .743 .979 1.249
5 ft. Pt .190 .469 .871 1.398 2.048 2.823 3.721 4.743
NC 16 24 29 34 37 40 43 46
Throw 9-13-22 14-20-34 18-28-46 23-35-57 28-42-62 33-50-68 38-57-72 43-65-77
FTS

CFM 195 310 420 530 645 755 870 980
Ps .018 .044 .081 .131 .192 .264 .348 .444
2 ft. Pt .029 .072 .134 .214 .315 .433 .573 .729
NC - 20 25 29 32 34 37 39
Throw 5-7-14 7-11-21 10-15-29 12-18-36 15-22-39 18-26-43 20-30-46 23-34-49
CFM 390 615 840 1065 1290 1510 1735 1960

Vertical Throw
10" Oval Inlet
Ps .025 .063 .116 .187 .274 .377 .497 .634

4 ft. Pt .071 .175 .326 .524 .768 1.054 1.391 1.775
NC - 22 27 31 34 36 39 41
Throw 6-10-19 10-15-30 14-21-41 17-26-51 21-32-56 25-37-60 28-43-65 32-48-69
CFM 490 770 1050 1330 1610 1890 2170 2450
LINEAR DIFFUSERS
Ps .033 .081 .151 .243 .356 .490 .646 .824

AND GRILLES
5 ft. Pt .104 .258 .479 .768 1.126 1.551 2.045 2.607

NC 16 23 29 32 35 38 40 43
Throw 9-13-22 14-20-34 18-28-46 23-35-57 28-42-62 33-50-68 38-57-72 43-65-77
CFM 195 310 420 530 645 755 870 980
Ps .017 .042 .077 .124 .181 .250 .330 .420
2 ft. Pt .024 .059 .109 .174 .256 .352 .466 .593
NC - - 18 23 26 29 32 34
Throw 5-7-14 7-11-21 10-15-29 12-18-36 15-22-39 18-26-43 20-30-46 23-34-49
CFM 390 615 840 1065 1290 1510 1735 1960

Vertical Throw
LINEAR DIFFUSERS
12" Oval Inlet
Ps .024 .059 .110 .177 .259 .357 .471 .600

FORMATIONS
4 ft. Pt .051 .127 .237 .381 .558 .767 1.012 1.291

NC - - 20 25 28 31 34 36
Throw 6-10-19 10-15-30 14-21-41 17-26-51 21-32-56 25-37-60 28-43-65 32-48-69
CFM 490 770 1050 1330 1610 1890 2170 2450
Ps .031 .077 .143 .230 .337 .464 .612 .780
5 ft. Pt .074 .184 .341 .548 .803 1.106 1.458 1.859
NC - 16 22 26 30 33 36 38
Throw 9-13-22 14-20-34 18-28-46 23-35-57 28-42-62 33-50-68 38-57-72 43-65-77
FTS
2 SLOT STANDARD BLADE VERTICAL THROW WITH METALAIRE PLENUM
CFM 170 260 350 440 530 620 710 800
Ps .044 .104 .188 .296 .430 .589 .772 .980
2 ft. Pt .061 .143 .259 .409 .594 .812 1.065 1.353
NC - - 19 23 27 30 32 34
Throw 3-5-10 5-8-16 7-11-21 9-13-27 11-16-29 13-19-32 14-22-34 16-24-36
CFM 340 520 700 880 1060 1240 1420 1600

Vertical Throw
8" Oval Inlet
Ps .063 .148 .268 .424 .614 .841 1.103 1.400

4 ft. Pt .131 .305 .553 .874 1.269 1.736 2.277 2.890
NC - 16 21 25 29 32 34 36
Throw 5-7-15 7-11-22 10-15-30 13-19-38 15-23-41 18-27-45 20-31-48 23-34-51
CFM 425 650 875 1100 1325 1550 1775 2000
LINEAR DIFFUSERS
Ps .082 .192 .348 .551 .799 1.093 1.434 1.820
AND GRILLES
5 ft. Pt .187 .438 .794 1.255 1.821 2.492 3.268 4.149
NC - 18 23 27 30 33 36 38
Throw 7-10-16 10-15-25 13-20-34 17-25-42 20-31-46 24-36-50 27-41-54 31-46-57
CFM 170 260 350 440 530 620 710 800
Ps .008 .019 .035 .056 .081 .110 .145 .184
2 ft. Pt .017 .039 .072 .113 .164 .225 .294 .374
NC - 21 26 29 32 35 37 40
Throw 3-5-10 5-8-16 7-11-21 9-13-27 11-16-29 13-19-32 14-22-34 16-24-36
CFM 340 520 700 880 1060 1240 1420 1600

Vertical Throw
10" Oval Inlet
LINEAR DIFFUSERS
Ps .012 .028 .050 .079 .115 .158 .207 .262
FORMATIONS
4 ft. Pt .046 .108 .196 .309 .449 .614 .806 1.023
NC 15 23 28 31 34 37 39 42
Throw 5-7-15 7-11-22 10-15-30 13-19-38 15-23-41 18-27-45 20-31-48 23-34-51
CFM 425 650 875 1100 1325 1550 1775 2000
Ps .015 .036 .065 .103 .150 .205 .269 .341
5 ft. Pt .069 .162 .293 .463 .671 .919 1.205 1.529
NC 17 24 29 33 36 38 41 43
Throw 7-10-16 10-15-25 13-20-34 17-25-42 20-31-46 24-36-50 27-41-54 31-46-57
FTS

CFM 170 260 350 440 530 620 710 800
Ps .008 .020 .036 .057 .083 .113 .148 .188
2 ft. Pt .014 .032 .058 .092 .133 .182 .239 .303
NC - 17 22 27 30 33 36 38
Throw 3-5-10 5-8-16 7-11-21 9-13-27 11-16-29 13-19-32 14-22-34 16-24-36
CFM 340 520 700 880 1060 1240 1420 1600

Vertical Throw
12" Oval Inlet
Ps .012 .028 .051 .081 .118 .161 .212 .269

4 ft. Pt .033 .077 .139 .220 .320 .438 .574 .729
NC - 19 24 29 32 35 38 40
Throw 5-7-15 7-11-22 10-15-30 13-19-38 15-23-41 18-27-45 20-31-48 23-34-51
CFM 425 650 875 1100 1325 1550 1775 2000
LINEAR DIFFUSERS
Ps .016 .037 .067 .106 .153 .210 .275 .349

AND GRILLES
5 ft. Pt .048 .113 .204 .323 .469 .642 .841 1.068

NC - 20 26 30 34 37 39 41
Throw 7-10-16 10-15-25 13-20-34 17-25-42 20-31-46 24-36-50 27-41-54 31-46-57
CFM 215 330 440 550 665 775 890 1000
Ps .009 .021 .038 .060 .086 .118 .155 .196
2 ft. Pt .017 .041 .073 .114 .166 .226 .297 .376
NC - 17 23 27 30 33 36 38
Throw 4-6-12 6-9-18 8-12-24 10-15-30 12-18-33 14-21-35 16-24-38 18-27-40
CFM 430 655 880 1105 1330 1550 1775 2000

Vertical Throw
LINEAR DIFFUSERS
12" Oval Inlet
Ps .013 .030 .054 .085 .123 .169 .221 .280

FORMATIONS
4 ft. Pt .046 .107 .193 .305 .441 .600 .787 .999

NC - 19 25 29 32 35 38 40
Throw 6-8-17 8-13-25 11-17-34 14-21-42 17-26-46 20-30-50 23-34-54 26-38-57
CFM 540 820 1100 1380 1660 1940 2220 2500
Ps .017 .039 .070 .111 .160 .219 .287 .364
5 ft. Pt .069 .160 .288 .453 .656 .895 1.173 1.487
NC - 21 26 30 34 37 39 41
Throw 7-11-19 11-17-28 15-23-38 19-28-47 23-34-52 27-40-56 31-46-60 34-52-64
FTS
CFM 430 595 760 925 1090 1250 1415 1580
Ps .022 .042 .068 .101 .139 .185 .236 .294
2 ft. Pt .055 .105 .172 .254 .353 .465 .596 .743
NC - 19 24 28 31 34 36 38
Throw 7-11-21 10-15-30 13-19-35 15-23-39 18-27-42 21-31-45 23-34-48 26-36-51
CFM 865 1190 1520 1850 2175 2505 2830 3160

Vertical Throw
12" Oval Inlet
Ps .031 .060 .097 .144 .199 .264 .337 .420

4 ft. Pt .166 .314 .512 .759 1.049 1.391 1.776 2.214
NC 16 21 26 30 33 36 38 40
Throw 10-15-30 14-21-42 18-27-50 22-32-55 25-38-59 29-44-64 33-48-68 37-51-72
CFM 1080 1490 1900 2310 2720 3130 3540 3950
LINEAR DIFFUSERS
Ps .041 .078 .126 .187 .259 .343 .439 .546
AND GRILLES
5 ft. Pt .250 .477 .775 1.145 1.588 2.103 2.690 3.350
NC 17 23 28 31 34 37 39 41
Throw 14-20-34 19-28-47 24-36-55 29-43-61 34-51-66 39-59-71 44-64-76 50-68-80
LINEAR DIFFUSERS
FORMATIONS
FTS

PRESSURIZED CEILING PLENUM WITH COMBO BLADE PATTERN CONTROLLER
HORIZONTAL FLOW
CFM 25 40 65 80 95 110 125 140
Ps .023 .058 .152 .230 .325 .436 .563 .706
1 Slot
NC - 21 35 40 45 49 52 55
1" Slot Width
Throw 6-11-15 9-13-19 12-17-24 13-19-27 14-20-29 15-22-31 16-23-33 17-25-35

CFM 40 60 100 120 145 165 190 210
Ps .015 .033 .092 .133 .194 .251 .333 .406
2 Slot
NC - 18 30 35 41 44 48 51
Throw 5-13-19 10-16-23 15-21-30 16-23-33 18-25-36 19-27-38 20-29-41 21-30-43
CFM 30 50 80 95 115 130 150 170
Ps .023 .063 .160 .226 .331 .423 .563 .723
LINEAR DIFFUSERS
1 Slot
NC - 19 31 36 41 45 48 52
AND GRILLES
1.5" Slot Width
Throw 5-12-16 9-15-21 13-19-27 14-20-29 16-23-32 17-24-34 18-26-36 19-27-39

CFM 45 75 120 145 175 195 225 255
Ps .013 .037 .094 .137 .200 .248 .330 .424
2 Slot
NC - 16 26 31 36 39 44 47
Throw 6-14-20 12-18-26 16-23-33 18-25-36 19-28-39 20-29-41 22-32-45 23-34-47
CFM 35 55 90 110 110 155 175 195
Ps .025 .061 .162 .242 .242 .481 .613 .761
1 Slot
NC - 15 27 33 33 42 46 48
2" Slot Width
Throw 4-12-18 9-16-22 14-20-28 15-22-31 15-22-31 18-26-37 19-28-39 20-29-41

LINEAR DIFFUSERS
CFM 55 85 135 165 165 235 265 295

FORMATIONS
Ps .015 .037 .093 .139 .139 .283 .360 .446

2 Slot
NC - - 23 28 28 37 41 44
Throw 4-13-22 9-19-27 16-24-35 19-27-38 19-27-38 22-32-46 24-34-48 25-36-51
CFM 40 60 100 120 145 165 190 210
Ps .025 .056 .156 .225 .329 .426 .564 .689
1 Slot
NC - - 24 29 34 38 42 44
2.5" Slot Width
Throw 4-12-19 8-16-23 14-21--30 16-23-33 18-25-36 19-27-38 20-29-41 21-30-43

CFM 60 90 150 180 220 250 285 315
Ps .014 .033 .091 .130 .195 .252 .327 .400
2 Slot
NC - - 20 24 29 33 37 39
FTS
Throw 3-13-23 7-19-28 15-26-36 19-28-40 22-31-44 22-37-47 25-35-50 26-37-53

CFM 45 70 115 145 170 200 225 250
Ps .023 .055 .149 .237 .325 .450 .570 .703
1 Slot
NC - - 23 29 33 38 41 44
3" Slot Width
Throw 4-12-20 9-18-25 15-23-32 18-25-36 19-27-39 21-30-42 22-32-45 23-33-47

CFM 70 105 175 220 255 300 340 375
Ps .014 .032 .090 .142 .191 .264 .339 .413
2 Slot
NC - - 19 25 28 33 36 39
Throw 3-14-25 7-20-30 16-28-39 21-31-44 23-34-47 25-36-51 27-39-55 28-41-58
PRESSURIZED CEILING PLENUM WITH COMBO BLADE PATTERN CONTROLLER
VERTICAL FLOW
CFM 50 75 100 120 140 160 180 200
Ps .033 .074 .131 .189 .257 .335 .424 .524
1 Slot
NC - 20 25 29 32 34 36 38
1" Slot Width
Throw 3-11-18 4-15-22 5-18-25 6-19-27 7-21-29 9-22-31 10-24-33 11-25-35

CFM 75 115 150 180 210 240 270 300
Ps .022 .052 .089 .128 .174 .227 .287 .355
2 Slot
NC - 18 23 26 29 32 34 36
Throw 3-12-22 4-18-27 6-22-30 7-24-33 8-26-36 9-27-39 10-29-41 11-30-43
CFM 65 95 125 150 175 200 225 250
Ps .027 .068 .100 .145 .197 .257 .326 .402
LINEAR DIFFUSERS
1 Slot
NC - 18 24 27 30 33 35 37
AND GRILLES
1.5" Slot Width
Throw 3-12-20 4-17-24 5-20-28 7-22-30 8-23-33 9-25-35 10-26-37 11-28-39

CFM 110 160 215 255 300 340 385 425
Ps .023 .049 .089 .125 .174 .223 .286 .349
2 Slot
NC - 18 24 27 30 32 35 37
Throw 3-14-26 5-21-31 7-26-36 8-28-40 9-30-43 11-32-46 12-35-49 13-36-51
CFM 100 150 200 240 280 320 360 400
Ps .039 .089 .158 .227 .309 .403 .511 .630
1 Slot
NC - 22 27 31 33 36 38 40
2" Slot Width
Throw 4-16-25 6-22-30 8-25-35 9-27-39 11-29-42 12-31-45 14-33-47 15-35-50
LINEAR DIFFUSERS
CFM 150 225 300 360 420 480 540 600
FORMATIONS
Ps .027 .060 .106 .153 .208 .272 .344 .425
2 Slot
NC - 19 25 28 31 34 36 38
Throw 4-17-30 6-25-37 8-30-43 10-33-47 11-36-51 13-39-55 14-41-58 16-43-61
CFM 125 190 250 300 350 400 450 500
Ps .041 .095 .164 .237 .322 .421 .533 .658
1 Slot
NC - 22 27 31 33 36 38 40
2.5" Slot Width
Throw 4-18-28 6-24-34 8-28-39 10-30-43 12-33-47 13-35-50 15-37-53 17-39-56

CFM 190 285 375 450 525 600 675 750
Ps .028 .064 .111 .160 .217 .284 .359 .443
2 Slot
NC - 19 25 28 31 34 36 38
FTS
Throw 5-19-34 7-29-42 9-34-48 11-37-53 13-40-57 14-43-61 16-46-65 18-48-68

CFM 150 225 300 360 420 480 540 600
Ps .047 .106 .189 .272 .370 .484 .612 .756
1 Slot
NC - 22 27 31 33 36 38 40
3" Slot Width
Throw 5-19-30 7-26-37 9-30-43 11-33-47 13-36-51 15-39-55 17-41-58 18-43-61

CFM 225 340 450 540 630 720 810 900
Ps .032 .073 .128 .184 .250 .327 .413 .510
2 Slot
NC - 19 25 28 31 34 36 38
Throw 5-21-37 7-31-46 10-37-53 12-41-58 14-44-62 16-47-67 18-50-71 20-53-75

PERFORMANCE NOTES FOR FORMATIONS SERIES
DEFINITION OF UNITS
Ps Negative static pressure (inches of water column)
LINEAR DIFFUSERS
AND GRILLES
LINEAR DIFFUSERS
FORMATIONS
FTS
MODEL FAI (INTEGRA)
The appeal of Formations Integra is its design. Laying in an
acoustical tee bar or hard ceiling, the specified ceiling material
becomes the face of the Integra diffuser that fully integrates the
ceiling and the diffuser. Integra is available in 1", 1.5" and 2" slot
widths. Constructed of extruded aluminum, Integra diffusers are
available for either supply or return and can be field adjusted for
one-, two-, three- or four-way directional air flow. Air patterns can
be adjusted for horizontal or vertical throws.
Available size 24 x 24
Available inlets 6", 8", 10", 12", 14" or no inlet
Finish white face with black interior
LINEAR DIFFUSERS
Optional steel center panel
AND GRILLES
LINEAR DIFFUSERS
FORMATIONS
Standard
Formations
FAI
available inlets
Unit A Number of
Models Slot Width Slots W (width) Round
FAI, FAII, FAIR, FAIB, FAIBI, FAIBR-10 1 1 4 1/8 6, 8, 10, 12
FAI, FAII, FAIR, FAIB, FAIBI, FAIBR-15 1 1/2 1 4 5/8 6, 8, 10, 12
FAI, FAII, FAIR, FAIB, FAIBI, FAIBR-20 2 1 5 1/8 6, 8, 10, 12

SERIES FORMATIONS SPECIFICATIONS
MODELS FAI/FAIR data. Data shall be tested in accordance to ANSI/
Diffusers shall be models FAI/FAIR manufactured by ASHRAE Standard 70-2006.
METALAIRE. Units shall be constructed of heavy wall
extruded aluminum. The units shall be in 1", 1 1/2" or 2" Paint Specification
slot widths. One or two slot units shall be provided. Process shall be anodic electro-deposition using an
The diffusers shall be available in 24" X 24". The units
and specifications.
LINEAR DIFFUSERS

AND GRILLES
Model Slot Width Border Style Inlet # of Slots Length Finish Mtg Hdw Pattern Controller Available Options
FAI 10-1 AA NI - No Inlet 1 24 x 24 20 - White/Black F1 C - Combo FODR Face Operated Damper
FAII 15-1.5 06 F6 S - Straight ID Inlet Damper
FAIR 20-2 08 ROD Remote Operated Damper
10 CC Closed Cell Insualtion
12 EI External Insulation
14
LINEAR DIFFUSERS
FORMATIONS
FAI
METALAIRE INTEGRA 24 X 24
CFM 80 120 155 190 225 260 300
Ps .024 .049 .084 .128 .181 .244 .315
6" Inlet
Pt .035 .072 .123 .187 .264 .355 .459
NC - 17 23 28 32 36 39
Throw 3-5-10 5-7-13 6-9-14 7-11-16 9-2-17 10-13-19 12-14-20
CFM 85 120 160 195 230 265 300
Ps .013 .026 .043 .065 .091 .122 .157
8" Inlet
Pt .016 .033 .056 .084 .118 .158 .203

NC - 18 24 29 33 36 40
Four Way Throw
1.5" Slot Width
Throw 3-5-10 5-7-13 6-9-15 8-11-16 9-12-18 10-13-19 12-14-20

CFM 90 130 165 205 240 275 315
LINEAR DIFFUSERS
Ps 0.009 0.018 0.03 0.045 0.063 0.084 0.108
10" Inlet
AND GRILLES
Pt 0.011 0.022 0.036 0.054 0.075 0.1 0.129
NC - 19 25 30 34 37 40
Throw 4-5-11 5-8-13 7-10-15 8-12-17 9-13-18 11-14-19 12-15-21
CFM 100 140 175 210 245 280 320
Ps .008 .014 .023 .034 .046 .061 .077
12" Inlet
Pt .009 .016 .026 .038 .052 .069 .087

NC - 20 26 31 35 38 41
Throw 4-6-12 5-8-14 7-10-15 8-12-17 10-13-18 11-14-19 12-15-21
CFM 70 100 125 155 180 210 235
Ps .021 .041 .066 .099 .137 .182 .233
6" Inlet
LINEAR DIFFUSERS
Pt .029 .056 .092 .137 .190 .252 .323
FORMATIONS
NC - 17 23 28 32 35 39
Throw 2-4-7 3-5-10 4-6-13 5-8-14 6-9-16 7-10-17 8-12-18
CFM 75 105 130 160 190 215 245
Ps .012 .022 .035 .052 .072 .095 .121
8" Inlet
Pt .015 .027 .044 .065 .090 .118 .151

Three Way Throw
NC - 18 24 29 33 36 39
1.5" Slot Width
Throw 3-4-8 3-5-10 4-7-13 5-8-15 6-9-16 7-11-17 8-12-18

CFM 75 105 135 165 195 225 255
Ps 0.007 0.014 0.023 0.035 0.049 0.065 0.084
10" Inlet
Pt 0.008 0.016 0.027 0.041 0.057 0.076 0.097

FAI
NC - 18 24 29 34 37 40
Throw 2-4-7 3-5-10 4-7-13 5-8-15 6-10-16 7-11-17 8-13-18
CFM 70 105 135 165 195 225 260
Ps .005 .009 .016 .024 .034 .046 .060
12" Inlet
Pt .005 .011 .018 .027 .038 .051 .066

NC - 18 24 29 34 38 41
Throw 2-4-7 3-5-10 4-7-13 5-8-15 7-10-16 8-11-17 9-13-19

MODEL UPFAL
The Formations plenum, model UPFAL, is designed to connect
model FAL to the ducted supply or return system. The UPFAL
is constructed from coated steel and is offered with standard
6" round inlet and oval inlets up to 14". The overall height of the
plenum is 10 1/2".
Available with 1/2" insulation, model UPIFAL
Optional external insulation, EI, and internal closed cell insulation, CC, are also available
Standard inlet sizes 6", 8", 10", 12", 14" or NI (no inlet)
Available in 24", 36", 48", 60" and 72" lengths

LINEAR DIFFUSERS
AND GRILLES
LINEAR DIFFUSERS
FORMATIONS
Inlet Chart Formation Unit Number of Nominal

Models Slot Width Slots W (width) Length
Size Type A B
FAP, FAPI-10 1 1 2 3/4 24, 36, 48, 60
6 Round 5 7/8
FAP, FAPI-15 1 1/2 1 3 3/4 24, 36, 48, 60
8 Oval 5 7/8 8 15/16
FAP, FAPI-20 2 1 4 3/4 24, 36, 48, 60
10 Oval 5 7/8 12 1/16
UPFAL
FAP, FAPI-25 2 1/5 1 5 3/4 24, 36, 48, 60

12 Oval 5 7/8 15 1/4
FAP, FAPI-30 3 1 6 3/4 24, 36, 48, 60
14 Oval 5 7/8 18 7/16
Formation Unit Number of Nominal

Insulation Options
Models Slot Width Slots W (width) Length
STD Standard Insulation 1/2" Fiberglass
FAP, FAPI-10 1 1 5 1/8 24, 36, 48, 60
CC Closed Cell Foam
FAP, FAPI-15 1 1/2 1 7 1/8 24, 36, 48, 60
EI Extermally Insulated 1/2" Foilback Fiberglass
40
FAP, FAPI-20 2 1 9 1/8 24, 36, 48, 60
FAP, FAPI-25 2 1/5 1 11 1/8 24, 36, 48, 60
FAP, FAPI-30 3 1 13 1/8 24, 36, 48, 60
MODEL UPFALC
The Formations hemmed plenum, model UPFALC, is designed
to connect model FALC to the ducted supply or return system.
The UPFALC Is constructed from coated steel and is offered with
standard 6" round inlet and oval inlets up to 14". The overall
height of the plenum is 10 1/2".
Available with 1/2" insulation, model UPIFALC
Optional external insulation, EI, and internal closed cell insulation, CC, are also available
Standard inlet sizes 6", 8", 10", 12", 14" or NI (no inlet)
Available in 24", 36", 48", 60" and 72" lengths
LINEAR DIFFUSERS
AND GRILLES
LINEAR DIFFUSERS
FORMATIONS
Formations
Unit Slot Width Number of Slots Dim W (I.D. Width)
1 1 3 1/4
UPFALC
1.5 1 4 1/4
2 1 5 1/4
Inlet Chart 2.5 1 6 1/4
Size Type A B 3 1 7 1/4
6 Round 5 7/8 1 2 5 / 5/8
8 Oval 5 7/8 8 15/16 1.5 2 7 5/8
10 Oval 5 7/8 12 1/16 2 2 9 5/8
12 Oval 5 7/8 15 1/4 2.5 2 11 5/8
14 Oval 5 7/8 18 7/16 3 2 13 5/8

FORMATIONS MODEL SPECIFICATIONS
MODEL UP/UPI
Model Slot Width Frame Style Inlet # of Slots Length End Detail Pattern Controller Available Options
UPFAL 10-1 -1 NI - No Inlet 1 24 2EB C - Combo FODR Face Operated Damper
UPIFAL 15-1.5 -6 06 2 36 1EB S - Straight ID Inlet Damper
UPFALC 20-2 08 48 2EC ROD Remote Operated Damper
UPIFALC 25-2.5 10 60 1EC CC Closed Cell Insualtion
30-3 12 72 MM EI External Insulation
14 OO
LINEAR DIFFUSERS
AND GRILLES
LINEAR DIFFUSERS
FORMATIONS
UPFALC
90 DEGREE MITER CORNER
LINEAR DIFFUSERS
AND GRILLES
Model: FAM90, Mitered Corner 90
Model Number of Slots Slot Width L W (Neck) W (Face OA)
FAM90-10 1 9 5/8 2 7/16 3 5/8
LINEAR DIFFUSERS
FAM90-15 1 1/2 10 5/8 3 7/16 4 5/8
FORMATIONS
FAM90-20 1 2 11 5/8 4 7/16 5 5/8
FAM90-25 2 1/2 12 5/8 5 7/16 6 5/8
FAM90-30 3 13 5/8 6 7/16 7 5/8
FAM90-10 1 12 4 13/16 6
FAM90-15 1 1/2 14 6 13/16 8
FAM90-20 2 2 16 8 13/16 10
FAM90-25 2 1/2 18 10 13/16 12
FAM90-30 3 20 12 13/16 14
ACCESSORIES

135 DEGREE MITER CORNER
LINEAR DIFFUSERS
AND GRILLES
LINEAR DIFFUSERS
FORMATIONS
Model: FAM135, Mitered Corner 135

Model Number of Slots Slot Width W (Neck) W (Face OA)
FAM135-10 1 2 7/16 3 5/8
FAM135-15 1 1/2 3 7/16 4 5/8
FAM135-20 1 2 4 7/16 5 5/8
FAM135-25 2 1/2 5 7/16 6 5/8
FAM135-30 3 6 7/16 7 5/8
FAM135-10 1 4 13/16 6
FAM135-15 1 1/2 6 13/16 8
ACCESSORIES
FAM135-20 2 2 8 13/16 10
FAM135-25 2 1/2 10 13/16 12
FAM135-30 3 12 13/16 14
MITERED CROSS
Mitered Cross
Number Slot W (Face
Model of Slots Width L W (Neck) OA)
FAC-10 1 15 5/8 2 7/16 3 5/8
FAC-15 1 1/2 16 5/8 3 7/16 4 5/8
FAC-20 1 2 17 5/8 4 7/16 5 5/8
FAC-25 2 1/2 18 5/8 5 7/16 6 5/8
FAC-30 3 19 5/8 6 7/16 7 5/8
FAC-10 1 18 4 13/16 6
FAC-15 1 1/2 20 6 13/16 8
FAC-20 2 2 22 8 13/16 10
FAC-25 2 1/2 24 10 13/16 12
LINEAR DIFFUSERS
FAC-30 3 26 12 13/16 14
AND GRILLES
T CROSS
T" Cross
Number Slot W (Face
Model of Slots Width L W (Neck) OA)
FAT-10 1 15 5/8 2 7/16 3 5/8
FAT-15 1 1/2 16 5/8 3 7/16 4 5/8
LINEAR DIFFUSERS
FAT-20 1 2 17 5/8 4 7/16 5 5/8
FORMATIONS
FAT-25 2 1/2 18 5/8 5 7/16 6 5/8
FAT-30 3 19 5/8 6 7/16 7 5/8
FAT-10 1 18 4 13/16 6
FAT-15 1 1/2 20 6 13/16 8
FAT-20 2 2 22 8 13/16 10
FAT-25 2 1/2 24 10 13/16 12
FAT-30 3 26 12 13/16 14
ACCESSORIES
45
45

Architecturak Linear Diffusers Formation,
Accessories Hoods Return Models
Models: 1" Slot
1 1/2" Slot
2" Slot
2 1/2" Slot
3" Slot
LIGHT SHIELD
Model: FAR-10 = 1" Slot = Non Insulation

Model: FAR-15 = 1 1/2" Slot = Non Insulation
Model: FAR-25 = 2 1/2" Slot = Non Insulation
H
LINEAR DIFFUSERS
AND GRILLES
SLOT SLOT
Slot Number
NUMBER
Slot Width
WIDTH
DIM H
DIM H
1" 3-1/8"
1 3 1/8
1-1/2" 3-1/8"
11 1/2 2" 3 1/8 3-1/8"
1 2 2-1/2"
3 1/8 3-1/8"
3" 3-1/8"
2 1/2 3 1/8
1" 2-3/4"
3 3 1/8
1-1/2" 3"
LINEAR DIFFUSERS
Slot Number 2
Slot Width 2" DIM H 3-3/4"
FORMATIONS
1 2-1/2"
2 3/4
5"
3" 5-3/4"
1 1/2 3
2 2 3 3/4
2 1/2 5
3 5 3/4

ACCESSORIES
Standard Finish 15/16" & 9/16" Tee System, 9/16" Bolt Slot
01 White with Black Plenum. Tee System, Hard Ceiling.

FODR FACE OPERATED DAMPER ROD
LINEAR DIFFUSERS
AND GRILLES
LINEAR DIFFUSERS
FORMATIONS
ACCESSORIES

INLETInletDamper
DAMPER
InletDamper
LINEAR DIFFUSERS
Available Inlets Round Dim. (A) Oval Dim. (A x B)

AND GRILLES
6 5 - 7/8
8 5 - 7/8 x 8 - 15/16
10 5 - 7/8 x 12 - 1/16
12 5 - 7/8 x 15 - 1/4
14 5 - 7/8 x 18 - 7/16
LINEAR DIFFUSERS
FORMATIONS
ACCESSORIES
48
48
FAM90-30 3" S
NUMBER SLO
OF SLOTS WIDT
ROD - Remote Operated Damper
ROD - Remote Operated Damper 1
1 1/ 2
Models: ROD Remote Operated Damper W 6" 1 2
Models: ROD Remote Operated Damper
L 2 1/ 2
3
REMOTE OPERATED DAMPER
Operator with Locking Coupler

Operator with Locking Coupler
MITERED
FAM135-10 1"
FAM135-15 1.5
LINEAR DIFFUSERS
FAM135-20 2"
AND GRILLES
Damper Installed
Damper Installed 6" FAM135-25 2.5
FAM135-30 3"
NUMBER SLO
6" 135 OF SLOTS WID
1
1 1/
W 1 2
2 1/
3
LINEAR DIFFUSERS
Damper with Cable and Locking Coupling
Damper with Cable and Locking Coupling
FORMATIONS
FIELD CUT TRANSITION KIT
Saw Cutl
Line
Field Cut Spreader Kit ACCESSORIES
Formationl
Diffuser
Cut Pattern Controllers as Requiredl

to Accomodate Spacer Kit

LINEAR SLOT DIFFUSERS
The METALAIRE line of linear diffusers is designed for applications such as perimeter office
space, airport terminals, convention centers and shopping malls. These diffusers are
aesthetically pleasing without compromising performance.
ALUMINUM LINEAR SLOT DIFFUSER ALUMINUM SPIRAL PIPE SLOT DIFFUSER

LINEAR DIFFUSERS
AND GRILLES
ALUMINUM MODULAR SLOT DIFFUSER PLENUMS

Aluminum Linear Slot Diffuser. The 6600 series is an excellent choice for
continuous linear applications where the diffuser can direct air along the
perimeter wall or glass and towards the occupied area to maximize comfort.
6600 Aluminum linear supply
6600R Aluminum linear return. PAGE 69
Aluminum Spiral Pipe Slot Diffuser. The 6600SP series is designed to

integrate into exposed spiral duct systems. The pattern controllers are fully
adjustable and can be set from horizontal to vertical discharge.
6610SP Aluminum spiral pipe supply
6610RSP Aluminum spiral pipe return PAGE 100
Aluminum Modular Slot Diffuser. The 6600SQ series modular slot diffuser
is designed for lay-in ceiling grids including standard T-bar, Tegular and Donn
Fineline. The design allows a ceiling tile (by others) to be installed from the
face of the diffuser without having to remove the plenum.
6600SQ Aluminum modular supply
6600SQI Aluminum modular supply Insulated
6600SQR Aluminum modular return PAGE 105
Plenums. The UP6600 series plenum is designed to connect the 6600

series linear slot diffuser to the ducted supply or return.
UP6600 Boot plenum
UPI6600 Boot plenum - Insulated PAGE 111
MODEL 6600
The 6600 series supply and return slot diffuser is an excellent choice
for continuous linear applications. The flexibility of the 6600 allows the
diffuser to be installed in a variety of applications including perimeter
office space and large public areas such as airport terminals,
convention centers or shopping malls.
Available in single sections up to 96" which give a clean appearance and easy installation
with fewer joints to line up

Available in 1 to 8 slots with 1/2", 3/4", 1" or 1 1/2" slot widths
Tag:
Aluminum pattern controllers are adjustable from the face and can be set to adjust volume
or throw direction from vertical to horizontal

Series : 6600
Wide choice of border styles and mounting frames
LINEAR DIFFUSERS
Adjustable Linear
Optional curving Slotfor
is available Diffuser - Extruded
architectural enhancementAluminum
AND GRILLES
Pattern
6600R isController / Damper
designed for return applications
Slots: 1/2" (6650), 3/4" (6675) and 1" (6610)
Models: 6600-10-6 Lay in T-Bar - 1 1/8" Border - No Hardware Submittal No: 6600-10(12)-6
6600-12-6 Lay in T-Bar - 1 1/8" Border - With Hardware
Models: 6600-10-6 ( Lay in T-Bar - 1 1/8 Border - No Hardware) Model: 6600-12-6 ( Lay in T-Bar - 1 1/8 Border - With Hardware )
D2 = Duct Opening
D1 = Duct Opening A = Nominal Width
Air Pattern
A = Nominal Width Controller Hanger
Screw
1 34
1 81 Air Pattern

4 58 Controller
1 S* 3
18 4
W =Overall Width 1 81
1 S* 3
18 4
W= Overall Width
(6600-10-6 & 6600-12-6 Models - End Border)
Number 6600-10(12)-6
T-Bar Module
Duct Opening = T-Bar Module - 2 41
Option: End Border
1 81 11
Overall Length = T-Bar Module - 18
4
(6600-10-6 & 6600-12-6 Models - End Cap)

6600
T-Bar Module
Duct Opening = T-Bar Module
Option: End Cap

Submittal

* For Slot Sizes Available See Tables 4
Model 6650 (6650-10-6 & 6650-12-6)
S=1/2" No. of Air Slots Air Deflection Patterns
Slot 1 2 3 4 5 6 7 8
A 1 1/4 2 1/2 3 3/4 5 6 1/4 7 1/2 8 3/4 10
D1 1 5/8 2 7/8 4 1/8 5 3/8 6 5/8 7 7/8 9 1/8 10 3/8
D2 1 7/8 3 1/8 4 3/8 5 5/8 6 7/8 8 1/8 9 3/8 10 5/8
W 2 3/4 4 5 1/4 6 1/2 7 3/4 9 10 1/4 11 1/2
Model 6675 (6675-10-6 & 6675-12-6) Model 6610 (6610-10-6 & 6610-12-6)
S=3/4" No. of Air Slots S=1" No. of Air Slots
Slot 1
2 3 4 5 6 7 8 Slot 1 2 3 4 5 6 7 8 LDG69
A 1 1/2 3 4 1/2 6 7 1/2 9 10 1/2 12 A 1 3/4 3 1/2 5 1/4 7 8 3/4 10 1/2 12 1/4 14
D1 1 7/8 3 3/8 4 7/8 6 3/8 7 7/8 9 3/8 10 7/8 12 3/8 D1 2 1/8 3 7/8 5 5/8 7 3/8 9 1/8 10 7/8 12 5/8 14 3/8
Model 6650 (10-6 & 12-6)
Number Of Slots
S=1/2 Slot 1 2 3 4 5 6 7 8
A 1 5/16 2 9/16 3 13/16 5 1/16 6 5/16 7 9/16 8 13/16 10 1/16
D1 1 3/4 3 4 1/4 5 1/2 6 3/4 8 9 1/4 10 1/2
D2 2 1/4 3 1/2 4 3/4 6 7 1/4 8 1/2 9 3/4 11
W 2 3/4 4 5 1/4 6 1/2 7 3/4 9 10 1/4 11 1/2
Model 6675 (10-6 & 12-6)

Number Of Slots
S=3/4 Slot 1 2 3 4 5 6 7 8
A 1 9/16 3 1/16 4 9/16 6 1/16 7 9/16 9 1/16 10 9/16 12 1/16
LINEAR DIFFUSERS
D1 2 3 1/2 5 6 1/2 8 9 3/4 11 12 1/2

AND GRILLES
D2 2 1/2 4 5 1/2 7 8 1/2 10 1/4 11 1/2 13

W 3 4 1/2 6 7 1/2 9 10 1/2 12 13 1/2
Model 6610 (10-6 & 12-6)

Number Of Slots
S=1 Slot 1 2 3 4 5 6 7 8
A 1 13/16 3 9/16 5 5/16 7 1/16 8 13/16 10 9/16 12 5/16 14 1/16
D1 2 1/4 4 5 5/8 7 1/2 9 1/4 11 12 3/4 14 1/2

D2 2 3/4 4 1/2 6 1/8 8 9 3/4 11 1/2 13 1/4 15
W 3 1/4 5 6 3/4 8 1/2 10 1/4 12 13 3/4 15 1/2
Model 6615 (10-6 & 12-6)

Number Of Slots
S=1 1/2 Slot 1 2 3 4 5 6 7 8
A 2 5/16 4 9/16 6 13/16 9 1/16 N/A N/A N/A N/A
D1 2 3/4 5 7 1/4 9 1/2 N/A N/A N/A N/A
D2 3 1/4 6 7 3/4 10 N/A N/A N/A N/A
W 3 3/4 6 8 1/4 10 1/2 N/A N/A N/A N/A
6600
Submittal: 6600-20-22-6
Adjustable Linear Slot Diffuser -
Extruded Aluminum Pattern Controller
Slots: 1/2" (6650), 3/4" (6675), 1" (6610) and 1-1/2"(6615)
Models: 6600-20-6 Lay In T-Bar - 3/4" Border - No Hardware
6600-22-6 Lay In T-Bar - 3/4" Border - With Hanger Bracket - Concealed Mount
Model: 6600-20-6 ( 3/4" Border - Lay in T-Bar) Model: 6600-22-6 ( 3/4" Border - Lay in T-Bar)
( No Hardware ) (With Hanger Bracket - Concealed Mount)
D2 = Duct Opening
A = Nominal Width Hanger
D1 = Duct Opening Screw
A = Nominal Width Air Pattern
Controller
Air Pattern
4 58
1 34 Controller
1 81
S*
3 3
1 81 1 34
4 4
W =Overall Width
3 S* 3
4 4
W =Overall Width
T-Bar Module
1
Option: End Border Duct Opening = T-Bar Module - 1 2
LINEAR DIFFUSERS
AND GRILLES
3 3
4 1 4
Option: End Cap T-Bar Module

Air Deflection Patterns Duct Opening = T-Bar Module
1
Model 6650 (20-6 & 22-6) Model 6650 (20-6 & 22-6)
S=1/2" Number Of Slots S=1/2" Number Of Slots
Slot 1 2 3 4 5 6 7 8 Slot 1 2 3 4 5 6 7 8

A 1 5/16 2 9/16 3 13/16 5 1/16 6 5/16 7 9/16 8 13/16 10 1/16 A 1 5/16 2 9/16 3 13/16 5 1/16 6 5/16 7 9/16 8 13/16 10 1/16
D1 1 11/16 2 13/16 4 3/16 5 3/8 6 9/16 8 1/8 9 7/16 10 5/16 D1 1 11/16 2 13/16 4 3/16 5 3/8 6 9/16 8 1/8 9 7/16 10 5/16
D2 1 13/16 3 1/16 4 5/16 5 9/16 6 13/16 8 1/16 9 5/16 10 9/16 D2 1 13/16 3 1/16 4 5/16 5 9/16 6 13/16 8 1/16 9 5/16 10 9/16
W 2 3 1/4 4 1/2 5 3/4 7 8 1/4 9 1/2 10 3/4 W 2 3 1/4 4 1/2 5 3/4 7 8 1/4 9 1/2 10 3/4
Model 6610 (20-6 & 22-6) Model 6615 (20-6 & 22-6)
S=1" Number Of Slots S=1 1/2" Number Of Slots
Slot 1 2 3 4 5 6 7 8 Slot 1 2 3 4 5 6 7 8
A 1 13/16 3 9/16 5 5/16 7 1/16 8 13/16 10 9/16 12 5/16 14 1/16 A 2 5/16 4 9/16 6 13/16 9 1/16 N/A N/A N/A N/A
D1 2 1/8 3 15/16 5 5/8 7 3/8 9 1/4 10 7/8 13 3/4 14 1/2 D1 2 5/8 4 7/8 7 1/8 9 3/8 N/A N/A N/A N/A
D2 2 5/16 4 1/16 5 13/16 7 9/16 9 5/16 11 1/16 12 13/16 14 9/16 D2 2 13/16 5 1/16 7 5/16 9 9/16 N/A N/A N/A N/A
W 2 1/2 4 1/4 6 7 3/4 9 1/2 11 1/4 13 14 3/4 W 3 5 1/4 7 1/2 9 3/4 N/A N/A N/A N/A
Standard Finish: Boot Plenums Available Sizes available in only 1-8 slots.
20 White frame with black pattern BP - Non-Insulated Boot Plenums Longest single section is 96"
controller. BPI - Insulated Boot Plenums Continuous lengths are made in
Optional Finishes (additional charge) sections.
21 Clear anodized with black
pattern controller
28 Custom Color / Setup Charge
6600


Model 6650 (20-6 & 22-6)
Number of Slots
S=1/2 Slot 1 2 3 4 5 6 7 8
A 1 5/16 2 9/16 3 13/16 5 1/16 6 5/16 7 9/16 8 13/16 10 1/16
D1 1 11/16 2 13/16 4 3/16 5 3/8 6 9/16 8 1/8 9 7/16 10 5/16
D2 1 13/16 3 1/16 4 5/16 5 9/16 6 13/16 8 1/16 9 5/16 10 9/16
W 2 3 1/4 4 1/2 5 3/4 7 8 1/4 9 1/2 10 3/4
Model 6675 (20-6 & 22-6)

Number of Slots
S=3/4 Slot 1 2 3 4 5 6 7 8
A 1 9/16 3 1/16 4 9/16 6 1/16 7 9/16 9 1/16 10 9/16 12 1/16
LINEAR DIFFUSERS
D1 1 13/16 2 5/16 5 6 5/8 7 13/16 9 5/16 10 13/16 12 1/4

AND GRILLES
D2 2 1/16 3 9/16 5 1/16 6 9/16 8 1/16 9 9/16 11 1/16 12 9/16

W 2 1/4 3 3/4 5 1/4 6 3/4 8 1/4 9 3/4 11 1/4 12 3/4
Model 6610 (20-6 & 22-6)

Number of Slots
S=1 Slot 1 2 3 4 5 6 7 8
A 1 13/16 3 9/16 5 5/16 7 1/16 8 13/16 10 9/16 12 5/16 14 1/16
D1 2 1/8 3 15/16 5 5/8 7 3/8 9 1/4 10 7/8 13 3/4 14 1/2

D2 2 5/16 4 1/16 5 13/16 7 9/16 9 5/16 11 1/16 12 13/16 14 9/16
W 2 1/2 4 1/4 6 7 3/4 9 1/2 11 1/4 13 14 3/4
Model 6615 (20-6 & 22-6)

Number of Slots
S=1 1/2 Slot 1 2 3 4 5 6 7 8
A 2 5/16 4 9/16 6 13/16 9 1/16 N/A N/A N/A N/A
D1 2 5/8 4 7/8 7 1/8 9 3/8 N/A N/A N/A N/A
D2 2 13/16 5 1/16 7 5/16 9 9/16 N/A N/A N/A N/A
W 3 5 1/4 7 1/2 9 3/4 N/A N/A N/A N/A
6600
Submittal: 6600-30-32-6
Slots: 1/2" (6650), 3/4" (6675),1" (6610) and 1-1/2" (6615)
Models: 6600-30-6 Lay in T-Bar - 1/2" Border - No Hardware
6600-32-6 Lay in T-Bar - 1/2" Border - Concealed Mount With Hardware
Model: 6600-30-6 ( 1/2" Border ) Model: 6600-32-6 ( 1/2" Border - Lay in T-Bar)
(Lay in T-Bar - No Hardware) (With Concealed Mount Hardware)
D2 = Duct Opening
Hanger
D1 = Duct Opening A =Nominal Width
Air Pattern Screw
A =Nominal Width Controller
Air Pattern
Controller
134
134
1
2 S*
3
4
1 S*
W = Overall Width 2 3
4
W = Overall Width
Option: End Border
End Border (Models: 6600-30-6 and 6600-32-6)
T-Bar Module
LINEAR DIFFUSERS
Duct Opening = T-Bar Module - 1
AND GRILLES
1 1
Option: End Cap 2
Overall Length = T-Bar Module - 1 2
4
End Cap (Models: 6600-30-6 and 6600-32-6)
T-Bar Module
Duct Opening = T-Bar Module

1
* For Slot Sizes Available See Table Below

Model 6650 (30-6 & 32-6) Model 6675 (30-6 & 32-6)
Slot 1 2 3 4 5 6 7 8 Slot 1 2 3 4 5 6 7 8
A 1 5/16 2 9/16 3 13/16 5 1/16 6 5/16 7 9/16 8 13/16 10 1/16 A 1 9/16 3 1/16 4 9/16 6 1/16 7 9/16 9 1/16 10 9/16 12 1/16
D1 1 9/16 2 13/16 4 1/16 5 5/16 6 9/16 7 13/16 9 1/16 10 5/16 D1 1 13/16 3 5/16 4 13/16 6 5/16 7 13/16 9 5/16 10 13/16 12 5/16
D2 1 13/16 3 1/16 4 5/16 5 9/16 6 13/16 8 1/16 9 5/16 10 9/16 D2 2 1/16 3 9/16 5 1/16 6 9/16 8 1/16 9 9/16 11 1/16 12 9/16
W 1 9/16 2 13/16 4 1/16 5 5/16 6 9/16 7 13/16 9 1/16 10 5/16 W 1 13/16 3 5/16 4 13/16 6 5/16 7 13/16 9 5/16 10 13/16 12 5/16
Model 6610 (30-6 & 32-6) Model 6615 (30-6 & 32-6)
Slot 1 2 3 4 5 6 7 8 Slot 1 2 3 4 5 6 7 8
A 1 13/16 3 9/16 5 5/16 7 1/16 8 13/16 10 9/16 12 5/16 14 1/16 A 2 5/16 4 9/16 6 13/16 9 1/16 N/A N/A N/A N/A
D1 2 1/16 3 13/16 5 9/16 7 5/16 9 1/16 10 13/16 12 9/16 14 5/16 D1 2 9/16 4 13/16 7 1/16 9 5/16 N/A N/A N/A N/A
D2 2 5/16 4 1/16 5 13/16 7 9/16 9 5/16 11 1/16 12 13/16 14 9/16 D2 2 13/16 5 1/16 7 5/16 9 9/16 N/A N/A N/A N/A
W 2 1/16 3 13/16 5 9/16 7 5/16 9 1/16 10 13/16 12 9/16 14 5/16 W 5 1/8 7 3/8 9 5/8 11 7/8 N/A N/A N/A N/A

6600
21 Clear anodized with black pattern
controller


Model 6650 (30-6 & 32-6)
Number of Slots
S=1/2 Slot 1 2 3 4 5 6 7 8
A 1 5/16 2 9/16 3 13/16 5 1/16 6 5/16 7 9/16 8 13/16 10 1/16
D1 1 9/16 2 13/16 4 1/16 5 5/16 6 9/16 7 13/16 9 1/16 10 5/16
D2 1 13/16 3 1/16 4 5/16 5 9/16 6 13/16 8 1/16 9 5/16 10 9/16
W 1 9/16 2 13/16 4 1/16 5 5/16 6 9/16 7 13/16 9 1/16 10 5/16
Model 6675 (30-6 & 32-6)

Number of Slots
S=3/4 Slot 1 2 3 4 5 6 7 8
A 1 9/16 3 1/16 4 9/16 6 1/16 7 9/16 9 1/16 10 9/16 12 1/16
LINEAR DIFFUSERS
D1 1 13/16 3 5/16 4 13/16 6 5/16 7 13/16 9 5/16 10 13/16 12 5/16

AND GRILLES
D2 2 1/16 3 9/16 5 1/16 6 9/16 8 1/16 9 9/16 11 1/16 12 9/16

W 1 13/16 3 5/16 4 13/16 6 5/16 7 13/16 9 5/16 10 13/16 12 5/16
Model 6610 (30-6 & 32-6)

Number of Slots
S=1 Slot 1 2 3 4 5 6 7 8
A 1 13/16 3 9/16 5 5/16 7 1/16 8 13/16 10 9/16 12 5/16 14 1/16
D1 2 1/16 3 13/16 5 9/16 7 5/16 9 1/16 10 13/16 12 9/16 14 5/16

D2 2 5/16 4 1/16 5 13/16 7 9/16 9 5/16 11 1/16 12 13/16 14 9/16
W 2 1/16 3 13/16 5 9/16 7 5/16 9 1/16 10 13/16 12 9/16 14 5/16
Model 6615 (30-6 & 32-6)

Number of Slots
S=1 1/2 Slot 1 2 3 4 5 6 7 8
A 2 5/16 4 9/16 6 13/16 9 1/16 N/A N/A N/A N/A
D1 2 9/16 4 13/16 7 1/16 9 5/16 N/A N/A N/A N/A
D2 2 13/16 5 1/16 7 5/16 9 9/16 N/A N/A N/A N/A
W 5 1/8 7 3/8 9 5/8 11 7/8 N/A N/A N/A N/A
6600
D2
D2==Duct
DuctOpening
Opening
CC
D1=Models:
D1 =Duct 6600-11-1 (Face Screw Mounting -
DuctOpening
Opening Air
Models: 6600-12-1 (Concealed
AA==Nominal
Nominal WidthSurface Mount -
Width
AirPattern
Pattern
1 1/8 Border - NoController
A = Nominal Width
Hardware)
Controller
1 1/8 Border - With Hardware)Hanger
Hanger
A = Nominal Width Screw
Screw
D2 = Duct Opening D2 = Duct Opening

C C
113434 A = Nominal Width A = Air
AirPattern
Pattern
Nominal Width
11811 D1 = Duct Opening D1 = Duct Opening
8 Air Pattern Air Pattern 445858 Controller
Controller
Hanger BottomHanger
Bottom
A = Nominal Width Controller
A = Nominal Width Controller Screw ofofHem
Hem
Screw
11 S*
S* 33
118 44
8
11811
Min
Min==3/4"
3/4"
W
W=Overall
=OverallWidth 8 Max
Width Max==1-1/4"
1-1/4"
1 1 34 1 34 Air Pattern Air Pattern
1 81
4 58 4 58S*
S* 33 Controller Bottom Controller Bottom
1111 44 Bottom ofof
88 Bottom
of Hem of Hem
1 S* 3 1 S* 3 Ceiling
CeilingPlane
Plane
18 4 18 4
CC
1 81 1
1Overall Min = 3/4" Min = 3/4"
W =Overall Width W =Overall Width W=
W= OverallWidth
8 Width
Max = 1-1/4" Max = 1-1/4"
1 S* 3 11 S* 3
18 4 4 Bottom of Bottom of
8
Ceiling Plane Ceiling Plane
LINEAR DIFFUSERS
C C
AND GRILLES
W= Overall Width W= Overall Width
End Border 1
Ceiling
CeilingOpening
Opening==Nominal Length++2 21
NominalLength
1
Duct
DuctOpening
Opening==Nominal Length++441
NominalLength
Ceiling Opening = NominalCeiling + 21

LengthOpening = Nominal Length + 21
118181 118181
1
Duct OpeningNominal
= Nominal
Nominal Length
Duct Opening
Length
Length +4 = Nominal Length + 41

1
Overall
OverallLength
Length==Nominal Length++224 41
NominalLength
1 81 1 81 1 81 1 81
Nominal Length Nominal Length
Overall Length = Nominal Overall
Length + 2 41 = Nominal Length + 2 41
Length
6600

Model 6650 (11-1 & 12-1)
Number of Slots
S=1/2 Slot 1 2 3 4 5 6 7 8
A 1 5/16 2 9/16 3 13/16 5 1/16 6 5/16 7 9/16 8 13/16 10 1/16
D1 1 3/4 3 4 1/4 5 1/2 6 3/4 8 9 1/4 10 1/2
D2 2 1/4 3 1/2 4 3/4 6 7 1/4 8 1/2 9 3/4 11
C 1 7/8 3 1/8 4 3/8 5 5/8 6 7/8 8 1/8 9 3/8 10 5/8
W 2 3/4 4 5 1/4 6 1/2 7 3/4 9 10 1/4 11 1/2
Model 6675 (11-1 & 12-1)

Number of Slots
S=3/4 Slot 1 2 3 4 5 6 7 8
LINEAR DIFFUSERS
A 1 9/16 3 1/16 4 9/16 6 1/16 7 9/16 9 1/16 10 9/16 12 1/16

AND GRILLES
D1 2 3 1/2 5 6 1/2 8 9 3/4 11 12 1/2

D2 2 1/2 4 5 1/2 7 8 1/2 10 1/4 11 1/2 13
C 2 1/8 3 5/8 5 1/8 6 5/8 8 1/8 9 7/8 11 1/8 12 5/8
W 3 4 1/2 6 7 1/2 9 10 1/2 12 13 1/2
Model 6610 (11-1 & 12-1)

Number of Slots
S=1 Slot 1 2 3 4 5 6 7 8
A 1 13/16 3 9/16 5 5/16 7 1/16 8 13/16 10 9/16 12 5/16 14 1/16
D1 2 1/4 4 5 5/8 7 1/2 9 1/4 11 12 3/4 14 1/2
D2 2 3/4 4 1/2 6 1/8 8 9 3/4 11 1/2 13 1/4 15
C 2 3/8 4 1/8 5 3/4 7 5/8 9 3/8 11 1/8 12 7/8 14 5/8
W 3 1/4 5 6 3/4 8 1/2 10 1/4 12 13 3/4 15 1/2
Model 6615 (11-1 & 12-1)

Number of Slots
S=1 1/2 Slot 1 2 3 4 5 6 7 8
A 2 5/16 4 9/16 6 13/16 9 1/16 N/A N/A N/A N/A
6600
D1 2 3/4 5 7 1/4 9 1/2 N/A N/A N/A N/A

D2 3 1/4 6 7 3/4 10 N/A N/A N/A N/A
C 2 7/8 5 7 3/8 9 5/8 N/A N/A N/A N/A
W 3 3/4 6 8 1/4 10 1/2 N/A N/A N/A N/A
Model: 6600-22-73 ( 3/4" Border Concealed Spline) Model: 6600-22-74 ( 3/4" Border Concealed Spline)
(Plaster Frame- with Concealed Mounting) (Plaster Frame and Wall Frame- with Concealed Mounting)
D1 = D ct ening D1 = D ct ening
A = Nominal Width A = Nominal Width
Hanger
Hanger Screw
Screw
Air attern
Air attern 4 58 ontroller
45
8 ontroller
1 81
1 81
3 S 3
3 S 3 4 4
4 4 W= erall Width
W= erall Width
Model: 6600-22-75 ( 3/4" Border Concealed Spline)
(Wall Frames- with Concealed Mounting)
D1 = Duct Opening
LINEAR DIFFUSERS
ption: nd Border
A = Nominal Width
AND GRILLES
Hanger
Screw
1
D ct ening = ar Mod le 2 1
Air Pattern
4 58 Controller
3 3
4 4 1 81
erall ength = ar Mod le41
3 S 3
For Slot Si es aila le See a le Belo
w 4 4
W= Overall Width
Model 6650

S=1/2" No. of Air Slots
Air De lection Pattern
Slot 1 2 3 4 5 6 7 8
A 1 1/4 2 1/2 3 3/4 5 6 5/16 7 1/2 8 3/4 10
D1 1 7/8 3 1/8 4 3/8 5 5/8 6 7/8 8 1/8 9 3/8 10 5/8
W 2 3 1/4 4 1/2 5 3/4 7 8 1/4 9 1/2 10 3/4
Model 6675 Model 6610

S=3/4" No. of Air Slots S=1" No. of Air Slots
Slot 1 2 3 4 5 6 7 8 Slot 1 2 3 4 5 6 7 8
A 1 1/2 3 4 1/2 6 7 1/2 9 10 1/2 12 A 1 3/4 3 1/2 5 1/4 7 8 3/4 10 1/2 12 1/4 14
D1 2 1/8 3 5/8 5 1/8 6 5/8 8 1/8 9 5/8 11 1/8 12 5/8 D1 2 3/8 4 1/8 5 7/8 7 5/8 9 3/8 11 1/8 12 7/8 14 5/8
W 2 1/4 3 3/4 5 1/4 6 3/4 8 1/4 9 3/4 11 1/4 12 3/4 W 2 1/2 4 1/4 6 7 3/4 9 1/2 11 1/4 13 14 3/4
6600

Model 6650 (22-73, 22-74 & 77-75)
Number of Slots
S=1/2 Slot 1 2 3 4 5 6 7 8
A 1 5/16 2 9/16 3 13/16 5 1/16 6 5/16 7 9/16 8 13/16 10 1/16
D1 1 11/16 2 13/16 4 3/16 5 3/8 6 9/16 8 1/8 9 7/16 10 5/16
W 2 1/8 3 3/8 4 5/8 5 7/8 7 1/8 8 3/8 9 5/8 10 7/8
Model 6675 (22-73, 22-74 & 77-75)

Number of Slots
S=3/4 Slot 1 2 3 4 5 6 7 8
A 1 9/16 3 1/16 4 9/16 6 1/16 7 9/16 9 1/16 10 9/16 12 1/16
D1 1 13/16 2 5/16 5 6 5/8 7 13/16 9 5/16 10 13/16 12 1/4
LINEAR DIFFUSERS
W 2 3/8 3 7/8 5 3/8 6 7/8 8 3/8 9 7/8 11 3/8 12 7/8

AND GRILLES
Model 6610 (22-73, 22-74 & 77-75)

Number of Slots
S=1 Slot 1 2 3 4 5 6 7 8
A 1 13/16 3 9/16 5 5/16 7 1/16 8 13/16 10 9/16 12 5/16 14 1/16
D1 2 1/8 3 15/16 5 5/8 7 3/8 9 1/4 10 7/8 13 3/4 14 1/2
W 2 5/8 4 3/8 6 1/8 7 7/8 9 5/8 11 3/8 13 1/8 14 7/8
Model 6615 (22-73, 22-74 & 77-75)

Number of Slots
S=1 1/2 Slot 1 2 3 4 5 6 7 8
A 2 5/16 4 9/16 6 13/16 9 1/16 N/A N/A N/A N/A
D1 2 5/8 4 7/8 7 1/8 9 3/8 N/A N/A N/A N/A
W 3 1/8 5 3/8 7 5/8 9 7/8 N/A N/A N/A N/A
6600
D2 = Duct Opening
D1 = Duct Opening Air Pattern A = Nominal Width Hange
Screw
Models: 6600-40-7 Models: 6600-42-7
(Concealed Spine - No
3
Hardware) (Concealed Spine -with Air Pa
14
1 41 Concealed Mounting Hardware) Contro
45 D2 = Duct Openin
D1 = Duct Opening Air Pattern D2 = Duct Opening 8
25 3
Air Pattern 1 A = Nominal Width
32 4 4 Width
A =25Nominal Controller A = Nominal Width Hanger
h Controller
S*
32 Screw 1 41
W = Overall Width
1 34 Air Pattern 3
25 1
1 34 1 41
1 41 32
Controller 4 25
4
S* 5
48 32
4 58 W = Overal Width
25 3 1
1 32 4 4
4 S* 25
25 32
32 1 34
W = Overall Width 1 41
h
25 3
25 3 1 32 4
32 4 4
LINEAR DIFFUSERS
25 S*
S*
32
W = Overal Width
AND GRILLES
W = Overal Width
Side View (6600-40-7 & 6600 42-7 - End Border

1
Ceiling Opening = Nominal Length + 2
1
End Border Duct Opening = Nominal length + 4

1
Ceiling Opening = Nominal Length + 2
1
Ceiling Opening = Nominal Length + 2 7
Overall Length = Nominal Length + 16 1
Duct Opening = Nominal length + 4
1
Duct Opening = Nominal length + 4
7
Overall Length = Nominal Length + 16
7
Overall Length = Nominal Length + 16
6600

Model 6650 (40-7 & 42-7)
Number of Slots
S=1/2 Slot 1 2 3 4 5 6 7 8
A 1 5/16 2 9/16 3 13/16 5 1/16 6 5/16 7 9/16 8 13/16 10 1/16
D1 1 9/16 2 13/16 4 1/16 5 5/16 6 9/16 7 13/16 9 1/16 10 5/16
D2 1 7/8 3 1/8 4 3/8 5 5/8 6 7/8 8 1/8 9 3/8 10 5/8
W 2 1/16 3 5/16 4 9/16 5 13/16 7 1/16 8 5/16 9 9/16 10 13/16
Model 6675 (40-7 & 42-7)

Number of Slots
S=3/4 Slot 1 2 3 4 5 6 7 8
A 1 9/16 3 1/16 4 9/16 6 1/16 7 9/16 9 1/16 10 9/16 12 1/16
LINEAR DIFFUSERS
D1 1 13/16 3 5/16 4 13/16 6 5/16 7 13/16 9 5/16 10 13/16 12 5/16

AND GRILLES
D2 2 1/8 3 5/8 5 1/8 6 5/8 8 1/8 9 5/8 11 1/8 12 5/8

W 2 5/16 3 13/16 5 5/16 6 13/16 8 5/16 9 13/16 11 5/16 12 13/16
Model 6610 (40-7 & 42-7)

Number of Slots
S=1 Slot 1 2 3 4 5 6 7 8
A 1 13/16 3 9/16 5 5/16 7 1/16 8 13/16 10 9/16 12 5/16 14 1/16
D1 2 1/16 3 13/16 5 9/16 7 5/16 9 1/16 10 13/16 12 9/16 14 5/16

D2 2 3/8 4 1/8 5 7/8 7 5/8 9 3/8 11 1/8 12 7/8 14 5/8
W 2 9/16 4 5/16 6 1/16 7 13/16 9 9/16 11 5/16 13 1/16 14 13/16
Model 6615 (40-7 & 42-7)

Number of Slots
S=1 1/2 Slot 1 2 3 4 5 6 7 8
A 2 5/16 4 9/16 6 13/16 9 1/16 N/A N/A N/A N/A
D1 2 9/16 4 13/16 7 1/16 9 5/16 N/A N/A N/A N/A
D2 2 7/8 5 1/8 7 3/8 9 5/8 N/A N/A N/A N/A
W 3 1/16 5 5/16 7 9/16 9 13/16 N/A N/A N/A N/A
6600
Submittal: 6600-40-42-8
Submittal: 6600-40-42-8
Extruded Aluminum
Adjustable Pattern
Linear Slot Controller
Diffuser -
Slots: 1/2"Aluminum
Extruded (6650), 3/4" (6675),Controller
Pattern 1" (6610), and 1-1/2" (6615)
Slots: 1/2"
Models: (6650), 3/4"
6600-40-8 Drop(6675), 1"Hardware
Face - No (6610), and 1-1/2" (6615)
Models: 6600-42-8
6600-40-8 Concealed
Drop Face - No Mount With Hardware
Hardware
6600-42-8 Drop Face - Concealed Mount With Hardware
Model: 6600-40-8 Model: 6600-42-8
(Drop Face - No Hardware)
Model: 6600-40-8 (Drop Face - With Concealed Mounting Hardware)
Model: 6600-42-8
(Drop Face - No Hardware) (Drop Face - With
D2 = Concealed Mounting Hardware)
Duct Opening
D2 Duct Opening
A = Nominal Width Hanger
Screw
Hanger
A = Nominal Width
Screw
D1 = Duct Opening Air Pattern Air Pattern
D1 Duct Opening
Air Pattern Controller
Air Pattern
A = Nominal Width Controller Controller
1 41 1 41
1 41 1 41
25 3 1 25 3 1
32 4 4 32 4 4
25 S* 3 25 1 25 S* 3 25 1
32 4 32 4 32 4 32 4
25 25
WS*
= Overall Width 32 WS*
= Overall Width 32
W = Overall Width W = Overall Width
Side View (6600-40-8, 6600-42-8 & End Border)
1
Side View (6600-40-8, 6600-42-8 & EndDuct
Border)
Opening = T-Bar Module -
LINEAR DIFFUSERS
2
1
End Border Duct Opening = T-Bar Module - 2
AND GRILLES
End Border

Air Deflection Patterns Overall Length = T-Bar Module - 41
* For Slot Sizes Available See Tables

* For Slot Sizes Available Model
See Tables
6650 (40-8 & 42-8) Model 6675 (40-8 & 42-8)
S=1/2" Number
Model 6650 (40-8 Of Slots
& 42-8) S=3/4" Number
& 42-8)
Slot 1 2 3 4 5 6 7 8 Slot 1 2 3 4 5 6 7 8
A 1 5/16 2 9/16 3 13/16 5 1/16 6 5/16 7 9/16 8 13/16 10 1/16 A 1 9/16 3 1/16 4 9/16 6 1/16 7 9/16 9 1/16 10 9/16 12 1/16
Slot 1 2 3 4 5 6 7 8 Slot 1 2 3 4 5 6 7 8
D1 1 9/16 2 13/16 4 1/16 5 5/16 6 9/16 7 13/16 9 1/16 10 5/16 D1 1 13/16 3 5/16 4 13/16 6 5/16 7 13/16 9 5/16 10 13/16 12 5/16
A 1 5/16 2 9/16 3 13/16 5 1/16 6 5/16 7 9/16 8 13/16 10 1/16 A 1 9/16 3 1/16 4 9/16 6 1/16 7 9/16 9 1/16 10 9/16 12 1/16

D2 1 7/8 3 1/8 4 3/8 5 5/8 6 7/8 8 1/8 9 3/8 10 5/8 D2 2 1/8 3 5/8 5 1/8 6 5/8 8 1/8 9 5/8 11 1/8 12 5/8
D1 1 9/16 2 13/16 4 1/16 5 5/16 6 9/16 7 13/16 9 1/16 10 5/16 D1 1 13/16 3 5/16 4 13/16 6 5/16 7 13/16 9 5/16 10 13/16 12 5/16
W 2 1/16 3 5/16 4 9/16 5 13/16 7 1/16 8 5/16 9 9/16 10 13/16 W 2 5/16 3 13/16 5 5/16 6 13/16 8 5/16 9 13/16 11 5/16 12 13/16
D2 1 7/8 3 1/8 4 3/8 5 5/8 6 7/8 8 1/8 9 3/8 10 5/8 D2 2 1/8 3 5/8 5 1/8 6 5/8 8 1/8 9 5/8 11 1/8 12 5/8
W 2 1/16 3 5/16 4 9/16 6610
Model 5 13/16
(40-8 &742-8)
1/16 8 5/16 9 9/16 10 13/16 W 2 5/16 3 13/16 5 5/16 6615
Model 6 13/16
(40-8 &842-8)
5/16 9 13/16 11 5/16 12 13/16
S=1" Number
& 42-8) S=1 1/2" Number
& 42-8)
Slot 1 2 3 4 5 6 7 8 Slot 1 2 3 4 5 6 7 8
A 1 13/16 3 9/16 5 5/16 7 1/16 8 13/16 10 9/16 12 5/16 14 1/16 A 2 5/16 4 9/16 6 13/16 9 1/16 N/A N/A N/A N/A
Slot 1 2 3 4 5 6 7 8 Slot 1 2 3 4 5 6 7 8
D1 2 1/16 3 13/16 5 9/16 7 5/16 9 1/16 10 13/16 12 9/16 14 5/16 D1 2 9/16 4 13/16 7 1/16 9 5/16 N/A N/A N/A N/A
A 1 13/16 3 9/16 5 5/16 7 1/16 8 13/16 10 9/16 12 5/16 14 1/16 A 2 5/16 4 9/16 6 13/16 9 1/16 N/A N/A N/A N/A
D2 2 3/8 4 1/8 5 7/8 7 5/8 9 3/8 11 1/8 12 7/8 14 5/8 D2 2 7/8 5 1/8 7 3/8 9 5/8 N/A N/A N/A N/A
D1 2 1/16 3 13/16 5 9/16 7 5/16 9 1/16 10 13/16 12 9/16 14 5/16 D1 2 9/16 4 13/16 7 1/16 9 5/16 N/A N/A N/A N/A
W 2 9/16 4 5/16 6 1/16 7 13/16 9 9/16 11 5/16 13 1/16 14 13/16 W 3 1/16 5 5/16 7 9/16 9 13/16 N/A N/A N/A N/A
D2 2 3/8 4 1/8 5 7/8 7 5/8 9 3/8 11 1/8 12 7/8 14 5/8 D2 2 7/8 5 1/8 7 3/8 9 5/8 N/A N/A N/A N/A
Notes:
W (check if provided)
2 9/16 4 5/16 6 1/16 7 13/16 9 9/16 11 5/16 13 1/16 14 13/16 W 3 1/16 5 5/16 7 9/16 9 13/16 N/A N/A N/A N/A
1. Available
Notes: Finishes
(check if provided) 2. Available Accessories 3. Available Options 4. Construction Details
Standard
1. Finish:
Available Finishes 2.Boot Plenums
Available Available
Accessories 3. Available Options 4. Construction
Sizes Details
available in only 1-8 slots.
20 White
Standard frame with black pattern
Finish: BootBP - Non-Insulated
Plenums Boot Plenums
Available Longest single section is 96"
Sizes available in only 1-8 slots.
controller. BPI
BP --Non-Insulated
Insulated BootBoot
Plenums Longest
Continuous lengths areismade
20 White frame with black pattern Plenums single section 96" in
Optional Finishes (additional charge)
controller. BPI - Insulated Boot Plenums sections. lengths are made in
Continuous
21 Clear
Optional anodized
Finishes with black
(additional charge) sections.
pattern
21 Clearcontroller
anodized with black
28 Custom
pattern Color / Setup Charge
controller
6600
Revision: B Date: 11/2013 Dimensions are in Inches Page: 1 of 1

Revision: B Date: 11/2013
Metal Industries, Inc. Clearwater, FL (727) 441 - 2651 Fax (800) 865 8383 www.metalaire.com in Inches Page:
Dimensions [email protected] 1 of 1

Model 6650 (40-8 & 42-8)
Number of Slots
S=1/2 Slot 1 2 3 4 5 6 7 8
A 1 5/16 2 9/16 3 13/16 5 1/16 6 5/16 7 9/16 8 13/16 10 1/16
D1 1 9/16 2 13/16 4 1/16 5 5/16 6 9/16 7 13/16 9 1/16 10 5/16
D2 1 7/8 3 1/8 4 3/8 5 5/8 6 7/8 8 1/8 9 3/8 10 5/8
W 2 1/16 3 5/16 4 9/16 5 13/16 7 1/16 8 5/16 9 9/16 10 13/16
Model 6675 (40-8 & 42-8)

Number of Slots
S=3/4 Slot 1 2 3 4 5 6 7 8
A 1 9/16 3 1/16 4 9/16 6 1/16 7 9/16 9 1/16 10 9/16 12 1/16
LINEAR DIFFUSERS
D1 1 13/16 3 5/16 4 13/16 6 5/16 7 13/16 9 5/16 10 13/16 12 5/16

AND GRILLES
D2 2 1/8 3 5/8 5 1/8 6 5/8 8 1/8 9 5/8 11 1/8 12 5/8

W 2 5/16 3 13/16 5 5/16 6 13/16 8 5/16 9 13/16 11 5/16 12 13/16
Model 6610 (40-8 & 42-8)

Number of Slots
S=1 Slot 1 2 3 4 5 6 7 8
A 1 13/16 3 9/16 5 5/16 7 1/16 8 13/16 10 9/16 12 5/16 14 1/16
D1 2 1/16 3 13/16 5 9/16 7 5/16 9 1/16 10 13/16 12 9/16 14 5/16

D2 2 3/8 4 1/8 5 7/8 7 5/8 9 3/8 11 1/8 12 7/8 14 5/8
W 2 9/16 4 5/16 6 1/16 7 13/16 9 9/16 11 5/16 13 1/16 14 13/16
Model 6615 (40-8 & 42-8)

Number of Slots
S=1 1/2 Slot 1 2 3 4 5 6 7 8
A 2 5/16 4 9/16 6 13/16 9 1/16 N/A N/A N/A N/A
D1 2 9/16 4 13/16 7 1/16 9 5/16 N/A N/A N/A N/A
D2 2 7/8 5 1/8 7 3/8 9 5/8 N/A N/A N/A N/A
W 3 1/16 5 5/16 7 9/16 9 13/16 N/A N/A N/A N/A
6600
Submittal: 6600-40-42-9
Slots: 1/2" (6650), 3/4" (6675), 1" (6610) and 1-1/2" (6615)
Models: 6600-40-9 Narrow Tee - No Hardware
6600-42-9 Narrow Tee / Bolt Slot Gird - Concealed Mount With Hardware
Model: 6600-40-9 Model: 6600-42-9 (Narrow Tee 9/16 Face)

(Narrow Tee 9/16 Face - No Hardware) (With Concealed Mount Hardware)
D2 = Duct Opening
A = Nominal Width
D1 = Duct Opening Hanger
A = Nominal Width Screw
Air Pattern
Controller
Air Pattern
1 41 45
8
Controller
25 3 1 1.8
32 4 4 1 41
S* 25
32
W = Overall Width 25 3 1
32 4 4
S* 25
32
End Border W = Overall Width
Side View (6600-40-9, 6600-42-9 & End Border)
LINEAR DIFFUSERS
1
Duct Opening = T-Bar Module - 2
AND GRILLES
6600-40-9 Model shown Overall Length = T-Bar Module - 41
with Bolt Grid as an alternate
application
Model 6650 (40-9 & 42-9) Model 6675 (40-9 & 42-9)
Slot 1 2 3 4 5 6 7 8 Slot 1 2 3 4 5 6 7 8
A 1 5/16 2 9/16 3 13/16 5 1/16 6 5/16 7 9/16 8 13/16 10 1/16 A 1 9/16 3 1/16 4 9/16 6 1/16 7 9/16 9 1/16 10 9/16 12 1/16
D1 1 9/16 2 13/16 4 1/16 5 5/16 6 9/16 7 13/16 9 1/16 10 5/16 D1 1 13/16 3 5/16 4 13/16 6 5/16 7 13/16 9 5/16 10 13/16 12 5/16
D2 1 7/8 3 1/8 4 3/8 5 5/8 6 7/8 8 1/8 9 3/8 10 5/8 D2 2 1/8 3 5/8 5 1/8 6 5/8 8 1/8 9 5/8 11 1/8 12 5/8

W 2 1/16 3 5/16 4 9/16 5 13/16 7 1/16 8 5/16 9 9/16 10 13/16 W 2 5/16 3 13/16 5 5/16 6 13/16 8 5/16 9 13/16 11 5/16 12 13/16
Model 6610 (40-9 & 42-9) Model 6615 (40-9 & 42-9)
Slot 1 2 3 4 5 6 7 8 Slot 1 2 3 4 5 6 7 8
A 1 13/16 3 9/16 5 5/16 7 1/16 8 13/16 10 9/16 12 5/16 14 1/16 A 2 5/16 4 9/16 6 13/16 9 1/16 N/A N/A N/A N/A
D1 2 1/16 3 13/16 5 9/16 7 5/16 9 1/16 10 13/16 12 9/16 14 5/16 D1 2 9/16 4 13/16 7 1/16 9 5/16 N/A N/A N/A N/A
D2 2 3/8 4 1/8 5 7/8 7 5/8 9 3/8 11 1/8 12 7/8 14 5/8 D2 2 7/8 5 1/8 7 3/8 9 5/8 N/A N/A N/A N/A
W 2 9/16 4 5/16 6 1/16 7 13/16 9 9/16 11 5/16 13 1/16 14 13/16 W 3 1/16 5 5/16 7 9/16 9 13/16 N/A N/A N/A N/A

21 Clear anodized with black
pattern controller
6600


Model 6650 (40-9 & 42-9)
Number of Slots
S=1/2 Slot 1 2 3 4 5 6 7 8
A 1 5/16 2 9/16 3 13/16 5 1/16 6 5/16 7 9/16 8 13/16 10 1/16
D1 1 9/16 2 13/16 4 1/16 5 5/16 6 9/16 7 13/16 9 1/16 10 5/16
D2 1 7/8 3 1/8 4 3/8 5 5/8 6 7/8 8 1/8 9 3/8 10 5/8
W 2 1/16 3 5/16 4 9/16 5 13/16 7 1/16 8 5/16 9 9/16 10 13/16
Model 6675 (40-9 & 42-9)

Number of Slots
S=3/4 Slot 1 2 3 4 5 6 7 8
A 1 9/16 3 1/16 4 9/16 6 1/16 7 9/16 9 1/16 10 9/16 12 1/16
LINEAR DIFFUSERS
D1 1 13/16 3 5/16 4 13/16 6 5/16 7 13/16 9 5/16 10 13/16 12 5/16

AND GRILLES
D2 2 1/8 3 5/8 5 1/8 6 5/8 8 1/8 9 5/8 11 1/8 12 5/8

W 2 5/16 3 13/16 5 5/16 6 13/16 8 5/16 9 13/16 11 5/16 12 13/16
Model 6610 (40-9 & 42-9)

Number of Slots
S=1 Slot 1 2 3 4 5 6 7 8
A 1 13/16 3 9/16 5 5/16 7 1/16 8 13/16 10 9/16 12 5/16 14 1/16
D1 2 1/16 3 13/16 5 9/16 7 5/16 9 1/16 10 13/16 12 9/16 14 5/16

D2 2 3/8 4 1/8 5 7/8 7 5/8 9 3/8 11 1/8 12 7/8 14 5/8
W 2 9/16 4 5/16 6 1/16 7 13/16 9 9/16 11 5/16 13 1/16 14 13/16
Model 6615 (40-9 & 42-9)

Number of Slots
S=1 1/2 Slot 1 2 3 4 5 6 7 8
A 2 5/16 4 9/16 6 13/16 9 1/16 N/A N/A N/A N/A
D1 2 9/16 4 13/16 7 1/16 9 5/16 N/A N/A N/A N/A
D2 2 7/8 5 1/8 7 3/8 9 5/8 N/A N/A N/A N/A
W 3 1/16 5 5/16 7 9/16 9 13/16 N/A N/A N/A N/A
6600
LINEAR DIFFUSERS
LINEAR SLOT DIFFUSERS 6600
AND GRILLES
LDG85
Model 6650 (50-1 & 52-1)
Number of Slots
S=1/2 Slot 1 2 3 4 5 6 7 8
A 1 5/16 2 9/16 3 13/16 5 1/16 6 5/16 7 9/16 8 13/16 10 1/16
D1 1 3/4 3 4 1/4 5 1/2 6 3/4 8 9 1/4 10 1/2
D2 2 1/4 3 1/2 4 3/4 6 7 1/4 8 1/2 9 3/4 11
C 1 7/8 3 1/8 4 3/8 5 5/8 6 7/8 8 1/8 9 3/8 10 5/8
W 4 1/8 5 3/8 6 5/8 7 7/8 9 1/8 10 3/8 11 5/8 12 7/8
Model 6675 (50-1 & 52-1)

Number of Slots
LINEAR DIFFUSERS
S=3/4 Slot 1 2 3 4 5 6 7 8
A 1 9/16 3 1/16 4 9/16 6 1/16 7 9/16 9 1/16 10 9/16 12 1/16
AND GRILLES
D1 2 3 1/2 5 6 1/2 8 9 3/4 11 12 1/2

D2 2 1/2 4 5 1/2 7 8 1/2 10 1/4 11 1/2 13
C 2 1/8 3 5/8 5 1/8 6 5/8 8 1/8 9 7/8 11 1/8 12 5/8
W 4 3/8 5 7/8 7 3/8 8 7/8 10 3/8 11 7/8 13 3/8 14 7/8
Model 6610 (50-1 & 52-1)

Number of Slots
S=1 Slot 1 2 3 4 5 6 7 8
A 1 13/16 3 9/16 5 5/16 7 1/16 8 13/16 10 9/16 12 5/16 14 1/16
D1 2 1/4 4 5 5/8 7 1/2 9 1/4 11 12 3/4 14 1/2
D2 2 3/4 4 1/2 6 1/8 8 9 3/4 11 1/2 13 1/4 15
C 2 3/8 4 1/8 5 3/4 7 5/8 9 3/8 11 1/8 12 7/8 14 5/8
W 4 5/8 6 3/8 8 1/8 9 7/8 11 5/8 13 3/8 15 1/8 16 7/8
Model 6615 (50-1 & 52-1)

Number of Slots
S=1 1/2 Slot 1 2 3 4 5 6 7 8
A 2 5/16 4 9/16 6 13/16 9 1/16 N/A N/A N/A N/A
6600
D1 2 3/4 5 7 1/4 9 1/2 N/A N/A N/A N/A

D2 3 1/4 6 7 3/4 10 N/A N/A N/A N/A
C 2 7/8 5 7 3/8 9 5/8 N/A N/A N/A N/A
W 5 1/8 7 9 5/8 11 7/8 N/A N/A N/A N/A
LSD - Linear Slot Diffusers
SERIES 6600
Series 6600 INSTALLATION
- Installation
Field Assembly
Units ordered longer than 8ft are shipped in multiple sections. Units
are provided with alignment pins to keep the 6600 diffusers straight
along continuous runs.
LINEAR DIFFUSERS
AND GRILLES
Concealed Mounting

Concealed Mounting makes installation easy
Units are inserted into hemmed plenum and
secured in place by tightening screws through the face
6600

LSD - Linear Slot Diffusers
Series
SERIES 6600 - Continuous
6600 Run Dimensions
INSTALLATION
MODELS 6650-11-1 - Surface Mount

MODELS 6650-12-1 - Concealed Mounting
3 2 2 3
12 12
12
LINEAR DIFFUSERS
Center Section (Typ.) Center Section (Typ.)

AND GRILLES
2 No End Border No End Border 2
End Section (Typ.) End Section (Typ.)

1 One End Border Only 1
One End Border Only
All drawings on this page are Plain View. A Plain View shows
the diffuser from behind - as if you were standing on the
floor above, looking down onto the back of the diffuser.
1 2
4 4 4
6600
3 12" Inside Leg Face Dimension
4 Note: For Duct Opening, Ceiling Opening, and Overall Width, see page LSD-83 - 90
Mitered Corner Models (1/2", 3/4", or 1" Slot)
MC6600 11-1
MC6600 12-1 MC6600-20-6 MC6600-40-7
MC6600 10-6 MC6600-22-73 MC6600-42-7
MC6600 12-6 MC6600-20-74 MC6600-30-6 MC6600-40-8 MC6600-40-9
LINEAR DIFFUSERS
Duct Size
Number of Slots (All Models) O.L. O.L. O.L. O.L. O.L.
AND GRILLES
1-2 24 24 3/4 24 27/32 24 5/16 24 29/32 24 29/32
3-5 36 36 3/4 36 27/32 36 5/16 36 29/32 36 29/32
6-8 48 48 3/4 48 27/32 48 5/16 48 29/32 48 29/32

MC6600 11-1
MC6600 12-1 MC6600-20-6 MC6600-40-7
MC6600 10-6 MC6600-22-73 MC6600-42-7
MC6600 12-6 MC6600-20-74 MC6600-30-6 MC6600-40-8 MC6600-40-9
Duct Size
1-2 12 12 23/32 12 11/32 12 1/8 12 3/8 12 3/8
6600
4-8 24 24 23/32 24 11/32 24 1/8 24 3/8 24 3/8
63

63
MC6600 11-1
MC6600 12-1 MC6600-20-6 MC6600-40-7
MC6600 10-6 MC6600-22-73 MC6600-42-7
Duct Size
MC6600 12-6 MC6600-20-74 MC6600-30-6 MC6600-40-8 63
MC6600-40-9
LINEAR DIFFUSERS

12 9/32 63
AND GRILLES
1-2 12 12 13/32 12 1/4 12 5/32 12 9/32

4-8 24 24 13/32 24 1/4 24 5/32 24 9/32 24 9/32
6600
LINEAR SLOT DIFFUSER ALUMINUM Performance Specification
MODELS 6600/6600R The manufacturer shall provide published performance
Air Diffusers shall be model 6600, supply, or 6600R, data. Data shall be tested in accordance to ANSI/
return, linear slot diffusers manufactured by METALAIRE. ASHRAE Standard 70-2006.
Units shall be constructed of heavy gauge extruded
aluminum. Diffusers shall have 1-8 slots with 1/2", 3/4", Paint Specification
1" or 1 1/2" slot widths. The units shall be the size and Process shall be anodic electro-deposition using an
quantity as outlined in the plans and specifications. anodic acrylic paint. Units shall undergo pre-treatment
For supply linear slot diffusers, the pattern controller including a pressurized spray stage using an alkaline
shall be curved, aerodynamically shaped, capable of cleaner and a de-ionized water rinse.
adjustment from the face of the diffuser. The pattern
controller shall allow adjustment from vertical to
horizontal patterns as well as damper the volume of the
LINEAR DIFFUSERS
diffuser. The pattern controller shall allow adjustment
AND GRILLES
from vertical to horizontal patterns as well as damper
the volume through the face of the diffuser. Pattern
controllers shall be aluminum construction. Steel
pattern controllers are not acceptable. For return linear
slot diffusers, the unit will be provided without pattern
controllers to minimize pressure drop and noise.
Linear slot diffusers shall be available in one-piece
sections up to 96". Supply units shall be furnished with
the face white and the pattern controller black.

6600

MODEL 6600
Mounting Styles Border Width T-bar Lay-in Surface Mount Concealed Spline Drop Face Narrow Tee Mud Flange
Screw Mounted 1 1/8 6600-11-1
1 1/8 6600-12-6 6600-12-1
3/4 6600-22-6
Concealed Mtg Hardware 1/2 6600-32-6
25/32 6600-42-7 6600-42-8 6600-42-9
6600-52-1
1 1/8 6600-10-6
3/4 6600-20-6
No Mtg. Hardware 1/2 6600-30-6
25/32 6600-40-7 6600-40-8 6600-40-9
LINEAR DIFFUSERS
6600-50-1
AND GRILLES
Concealed Spline Concealed Wall Mounting Concealed Spline

Plaster Mtg Frame Spline Plaster Mtg Frame Wall Mtg Frame
3/4 Border 6600-22-73 3/4 Border 6600-22-74 3/4 Border 6600-22-75
Number of Slots Available Slot Width Model # Available Finishes AvailableAccessories

1 through 8 1/2 6650 Standard Mitered Corners
3/4 6675 20 White / Black PC Boot Plenums
1 6610 Optional
1 1/2 6615 21 Clear Anodize
28 Custom Color
6600
MODEL 6650 1/2" SLOT - CFM PER LINEAR FOOT
Horizontal .005 .021 .047 .083 .130 .188 .255 .334 .422 .521
Static
Slots Pressure Vertical .004 .015 .033 .058 .091 .132 .179 .234 .295 .365
CFMLF 5 10 15 20 25 30 35 40 45 50
Horizontal Throw 1-1-6 3-6-12 6-10-14 10-12-17 11-13-19 12-14-20 13-16-22 14-17-24 14-18-25 15-19-26
1 Vertical Throw 2 7 9 11 12 13 14 15 16 17
Horizontal NC <15 <15 <15 17 22 27 30 34 36 38
Vertical NC <15 <15 <15 <15 <15 15 18 22 24 26
CFMLF 10 20 30 40 50 60 70 80 90 100
2 Vertical Throw 3 9 13 15 17 18 20 21 23 24
Horizontal NC <15 <15 <15 20 25 30 33 37 39 41
LINEAR DIFFUSERS
Vertical NC <15 <15 <15 <15 <15 18 21 25 27 29
AND GRILLES
CFMLF 16 30 45 60 75 90 105 120 135 150
3 Vertical Throw 5 11 16 18 21 23 24 26 28 29
Horizontal NC <15 <15 15 22 27 32 35 39 41 43
Vertical NC <15 <15 <15 <15 15 20 23 27 29 31
CFMLF 20 40 60 80 100 120 140 160 180 200
4 Vertical Throw 5 13 18 21 24 26 28 630 32 34

Horizontal NC <15 <15 17 24 29 33 36 40 42 44
Vertical NC <15 <15 <15 <15 17 21 24 28 30 32
CFMLF 25 50 75 100 125 150 175 200 225 250
5 Vertical Throw 6 19 23 26 29 32 34 37 39 41
Horizontal NC <15 <15 19 26 31 35 37 41 43 45
Vertical NC <15 <15 <15 <15 19 23 25 29 31 33
CFMLF 30 60 90 120 150 180 210 240 270 300
6 Vertical Throw 6 16 23 26 20 32 34 37 39 41
Horizontal NC <15 17 20 27 32 36 38 42 44 46
Vertical NC <15 <15 <15 15 20 24 26 30 32 35
CFMLF 35 70 105 140 175 210 245 280 315 350
6600
Horizontal Thorw 5-9-18 12-18-31 18-27-38 24-31-44 29-35-49 31-38-54 34-41-59 36-44-63 38-47-66 40-49-70
7 Vertical Throw 7 17 24 28 31 34 37 40 42 45
Horizontal NC <15 18 21 28 33 37 39 43 45 47
Vertical NC <15 <15 <15 16 21 25 37 31 33 35
CFMLF 40 80 120 160 200 240 280 320 360 400
Horizontal Thorw 6-10-19 13-19-33 19-29-41 26-33-47 31-37-33 33-41-58 36-44-63 39-47-67 41-50-71 45-53-75
8 Vertical Throw 7 18 26 30 34 7 40 43 45 48
Horizontal NC <15 20 22 29 34 39 40 44 46 48
Vertical NC <15 <15 <15 17 22 27 28 32 34 36

MODEL 6675 3/4" SLOT - CFM PER LINEAR FOOT
Horizontal 0.011 0.024 0.042 0.066 0.095 0.129 0.168 0.213 0.263 0.318
Static
CFMLF 10 15 20 25 30 35 40 45 50 55
1 Vertical Throw 2 6 10 12 13 14 15 16 17 18
Horizontal NC <15 <15 <15 15 19 23 25 28 31 33
Vertical NC <15 <15 <15 <15 <15 <15 <15 16 19 21
CFMLF 20 30 40 50 60 70 80 90 100 110
Horizontal Throw 1-3-10 3-6-22 5-10-29 7-16-35 10-22-38 14-26-41 19-29-44 22--33-46 25-35-49 27-36-51
2 Vertical Throw 4 8 14 17 18 20 21 23 24 25
LINEAR DIFFUSERS
Horizontal NC <15 <15 <15 18 22 26 28 31 34 36

Vertical NC <15 <15 <15 <15 <15 <15 16 19 22 24
AND GRILLES
CFMLF 30 45 60 75 90 105 120 135 150 165

3 Vertical Throw 4 10 17 21 23 24 26 28 29 31
Horizontal NC <15 <15 <15 20 24 28 30 33 35 37
Vertical NC <15 <15 <15 <15 <15 16 18 21 23 25
CFMLF 40 60 80 100 120 140 160 180 200 220
4 Vertical Throw 5 11 20 24 26 28 30 32 34 35
Horizontal NC <15 15 16 22 25 30 31 35 37 39
Vertical NC <15 <15 <15 <15 <15 18 19 23 25 27
CFMLF 50 75 100 125 150 175 200 225 250 275
5 Vertical Throw 6 13 22 27 29 31 34 36 38 39
Horizontal NC <15 16 17 23 26 32 33 36 38 40
Vertical NC <15 <15 <15 <15 <15 20 21 24 20 28
CFMLF 60 90 120 150 180 210 240 270 300 330
6 Vertical Throw 6 14 24 29 32 34 37 39 41 43
Horizontal NC <15 17 19 24 28 33 34 37 39 41
Vertical NC <15 <15 <15 <15 16 21 22 25 27 29
CFMLF 70 105 140 175 210 245 280 315 350 385
6600
7 Vertical Throw 7 15 26 31 34 37 40 42 45 47
Horizontal NC 16 18 20 24 29 34 35 38 40 42
Vertical NC <15 <15 <15 <15 17 22 23 26 28 30
CFMLF 80 120 160 200 240 280 320 360 400 440
8 Vertical Throw 7 16 28 34 37 40 43 45 48 50
Horizontal NC 18 19 22 25 30 35 37 39 41 43
Vertical NC <15 <15 <15 <15 18 23 25 27 29 31
MODEL 6610 1" SLOT - CFM PER LINEAR FOOT
Horizontal .008 .030 .047 .068 .092 .120 .152 .188 .227 .270
Static
CFMLF 10 20 25 30 35 40 45 50 55 60
1 Vertical Throw 2 10 12 13 14 15 16 17 18 18
Horizontal NC <15 <15 <15 <15 19 22 24 26 28 30
Vertical NC <15 <15 <15 <15 <15 <15 <15 <15 16 18
CFMLF 20 40 50 60 70 80 90 100 110 120
2 Vertical Throw 4 14 17 18 20 21 23 24 25 26
Horizontal NC <15 <15 <15 <15 21 25 27 29 31 33
LINEAR DIFFUSERS
Vertical NC <15 <15 <15 <15 <15 <15 15 17 19 21
AND GRILLES
CFMLF 30 60 75 90 105 120 135 150 165 180
3 Vertical Throw 4 17 21 23 24 26 28 29 31 32
Horizontal NC <15 <15 <15 17 22 27 28 30 32 34
Vertical NC <15 <15 <15 <15 <15 15 16 18 20 22
CFMLF 40 80 100 120 140 160 180 200 220 240
4 Vertical Throw 5 20 24 26 28 30 32 34 35 37

Horizontal NC <15 <15 15 19 24 29 30 32 34 36
Vertical NC <15 <15 <15 <15 <15 17 18 20 22 24
CFMLF 50 100 125 150 175 200 225 250 275 300
5 Vertical Throw 6 24 29 32 34 37 39 41 43 45
Horizontal NC <15 <15 16 21 25 31 32 34 35 37
Vertical NC <15 <15 <15 <15 <15 19 20 22 23 25
CFMLF 60 120 150 180 210 240 270 300 330 360
6 Vertical Throw 6 24 29 32 34 37 39 41 43 45
Horizontal NC <15 15 17 22 27 33 34 35 36 38
Vertical NC <15 <15 <15 <15 <15 21 22 23 24 26
CFMLF 70 140 175 210 245 280 315 350 385 420
6600
7 Vertical Throw 7 26 31 34 37 40 42 45 47 49
Horizontal NC <15 16 18 24 28 34 36 37 37 39
Vertical NC <15 <15 <15 <15 16 22 24 25 25 27
CFMLF 80 160 200 240 280 320 360 400 440 480
8 Vertical Throw 7 28 34 37 40 43 475 48 50 52
Horizontal NC <15 16 20 26 30 35 37 38 39 41
Vertical NC <15 <15 <15 <15 18 23 25 26 27 29

MODEL 6615 1 1/2" SLOT - CFM PER LINEAR FOOT
Horizontal 0.005 0.038 0.052 0.069 0.089 0.112 0.137 0.165 0.196 0.229
Static
Slots Pressure Vertical 0.006 0.042 0.058 0.077 0.098 0.123 0.151 0.182 0.216 0.253
CFM/LF 10 25 30 35 40 45 50 55 60 65
1 Vertical Throw 2 12 13 14 15 16 17 18 18 19
Horizontal NC <15 <15 <15 19 22 24 26 28 30 32
Vertical NC <15 <15 <15 <15 <15 <15 <15 16 18 20
CFM/LF 20 50 60 70 80 90 100 110 120 130
2 Vertical Throw 4 17 18 20 21 23 24 25 26 27
Horizontal NC <15 <15 <15 21 25 27 29 31 33 36
LINEAR DIFFUSERS
Vertical NC <15 <15 <15 <15 <15 15 17 19 21 23

AND GRILLES
CFM/LF 30 75 90 105 120 135 150 165 180 195

3 Vertical Throw 4 21 23 24 26 28 29 31 32 33
Horizontal NC <15 <15 17 22 27 28 30 32 34 37
Vertical NC <15 <15 <15 <15 15 16 18 20 22 24
CFM/LF 40 100 120 140 160 180 200 220 240 260
4 Vertical Throw 5 24 26 28 30 32 34 35 37 38
Horizontal NC <15 15 19 24 29 30 32 34 36 39
Vertical NC <15 <15 <15 <15 17 18 20 22 24 26
6600
MODEL 6650R 1/2" SLOT WIDTH
Number of Slots Negative Ps Inches of Water .020 .040 .060 .080 .100 .150
CFM/ft. 15 20 25 30 35 40
1
NC - 20 27 32 37 41
CFM/ft. 35 50 60 70 80 95
2
NC - 22 27 32 37 41
CFM/ft. 55 80 95 110 125 150
3
NC - 23 28 33 37 42
CFM/ft. 70 100 120 140 155 190
4
NC - 24 30 34 37 44
CFM/ft. 90 135 155 180 200 245
5
NC - 25 30 34 37 44
LINEAR DIFFUSERS
CFM/ft. 110 155 195 220 245 300
AND GRILLES
6
NC - 26 33 37 40 96
CFM/ft. 130 185 225 260 290 365
7
NC - 27 33 37 41 47
CFM/ft. 140 200 245 280 310 385
8
NC - 28 34 38 42 48

MODEL 6675R 3/4" SLOT WIDTH
CFM/ft. 25 35 45 50 55 70
1
NC - 21 29 32 35 42
CFM/ft. 55 80 90 100 110 135
2
NC - 25 29 32 35 42
CFM/ft. 90 115 140 160 180 220
3
NC - 26 32 36 40 46
CFM/ft. 100 140 175 200 225 275
4
NC - 27 34 38 41 47
CFM/ft. 140 185 225 260 290 360
5
6600
NC - 28 34 38 42 48
CFM/ft. 160 225 275 320 360 440
6
NC - 29 35 40 43 49
CFM/ft. 175 250 305 350 395 480
7
NC - 30 36 40 44 50
CFM/ft. 200 285 350 400 450 545
8
NC - 31 37 41 45 51

MODEL 6610R 1" SLOT WIDTH
CFM/ft. 35 50 60 70 80 95
1
NC - 25 31 36 40 45
CFM/ft. 70 100 125 140 155 190
2
NC - 27 33 37 41 47
CFM/ft. 105 150 185 210 235 285
3
NC - 29 35 39 43 49
CFM/ft. 140 200 250 280 310 380
4
NC - 31 37 41 45 51
CFM/ft. 175 250 300 350 390 475
5
NC - 32 38 42 46 52
LINEAR DIFFUSERS
CFM/ft. 210 300 375 420 465 570

AND GRILLES
6
NC - 33 40 43 47 53
CFM/ft. 245 350 425 490 545 665
7
NC - 34 41 44 47 54
CFM/ft. 280 400 475 560 620 760
8
NC - 35 42 45 48 55
6600
DEFINITION OF UNITS
1. On units without BP/BPI plenums, pressure drop reported is across the diffuser element only
The field supply plenum pressure drop should be included when determining system fan requirements
A good approximation of the static pressure requirements can be calculated by adding the velocity
pressure through the plenum inlet to the diffuser section pressure drop
2. NC is based on a 4 ft. section of diffuser
The following table should be used to calculate sound levels for lengths other than 4 ft.
3. To correct throws for lengths other than the 4 ft. lengths used in determining catalog performance,
throws should be adjusted per the following table
NC Correction for Length

Length (feet) 2 4 6
NC Correction -2 0 2
Throw Correction Multiplier for Length
LINEAR DIFFUSERS
Length (feet) 2 4 8
Throw Correction -7 1 1.2
AND GRILLES
4. All pressures are in inches of water
5. Isothermal throws are given for terminal velocities of 150, 100 and 50fpm, based upon 4' section
6. Vertical throw values are based on a 50fpm terminal velocity
7. For Vertical supply subtract one NC
8. For Returns minus pattern controllers, deduct 12 NC
9. Throw values are based on a 1-Way discharge from the slot. For 2-Way discharge, throw is based upon
the number and size of the slots throwing in each direction, with the total supply air flow split equally
between all slots in the unit
0. Data was collected in accordance to ASHRAE standard 70-2006. Method of Testing for rating the
1
performance of air outlets and inlets

6600

MODEL 6600SP
The 6600SP series linear slot for spiral pipe is designed to integrate
into exposed spiral duct systems. The pattern controllers are fully
adjustable and can be set from horizontal to vertical discharge.
Available in 1 to 4 slots with 1" slot width
Pattern controllers on supply units are aluminum and are adjustable from the face of the
diffuser and can be set to adjust volume or throw direction from vertical to horizontal
6600RSP is designed for return applications. The unit is supplied without pattern controllers
to reduce pressure and noise

LINEAR DIFFUSERS
AND GRILLES
Duct Cut Out Opening

6600SP
Pipe
Diameter 1 Slot 2 Slots 3 Slots 4 Slots
10 2.500 4.250 N/A N/A
12, 14 2.500 4.250 6.000 N/A
16 2.500 4.250 6.000 8.000
18, 20, 22 N/A 4.125 6.000 7.875
24, 26, 28 N/A 4.125 6.000 7.750
30 N/A 4.125 6.000 7.750
38 N/A 4.125 6.000 7.750
Note: Duct Cut Out Opening = Normal Length + 1/2 70
SERIES 6600SP SPECIFICATIONS
LINEAR SLOT DIFFUSER FOR Performance Specification
SPIRAL PIPE ALUMINUM The manufacturer shall provide published performance
MODELS 6600SP/6600RSP data. Data shall be tested in accordance to ANSI/
Air diffusers shall be model 6600SP, supply, or 6600RSP, ASHRAE Standard 70-2006.
return, linear slot diffusers manufactured by METALAIRE.
Units shall be constructed of heavy gauge extruded Paint Specification
aluminum. Diffusers shall have 1-4 slots with 1" slot Process shall be anodic electro-deposition using an
width. The units shall be the size and quantity as outlined anodic acrylic paint. Units shall undergo pre-treatment
in the plans and specifications. including a pressurized spray stage using an alkaline
For supply linear slot diffusers, the pattern controller
shall be curved, aerodynamically shaped, capable of
adjustment from the face of the diffuser. The pattern
controller shall allow adjustment from vertical to
LINEAR DIFFUSERS
horizontal patterns as well as damper the volume of the
AND GRILLES
diffuser. The pattern controller shall allow adjustment
from vertical to horizontal patterns as well as damper
the volume through the face of the diffuser. Pattern
controllers shall be aluminum construction. Steel
pattern controllers are not acceptable. For return linear
slot diffusers, the unit will be provided without pattern
controllers to minimize pressure drop and noise.
Linear slot diffusers shall be available in one-piece
sections up to 96". Supply units shall be furnished with
the face white and the pattern controller black.

6600SP

MODEL 6610SP/6610RSP
Model # Available Frame Styles Pipe Diameter Available Slots Available Finishes
6610SP - Supply 11 10 1, 2 Standard
6610RSP - Return 12 12 1, 2, 3 20 White / Black PC
14 1, 2, 3 Optional
16 1, 2, 3, 4 21 Clear Anodize / Black PC
18 1, 2, 3, 4 28 Custom Color / Black PC
20 1, 2, 3, 4
24 1, 2, 3, 4
30 1, 2, 3, 4
LINEAR DIFFUSERS
AND GRILLES
6600SP
SERIES 6600SP PERFORMANCE DATA
MODEL 6600SP 1" SLOT - CFM PER LINEAR FOOT
Static Horizontal .008 .030 .047 .068 .092 .120 .152 .188 .227 .270
Pressure
Slots Vertical .003 .012 .020 .028 .037 .040 .061 .076 .092 .109
CFMLF 10 20 25 30 35 40 45 50 55 60
1 Vertical Throw 2 10 12 13 14 15 16 17 18 18
Horizontal NC <15 <15 <15 <15 19 22 24 26 28 30
Vertical NC <15 <15 <15 <15 <15 <15 <15 <15 16 18
CFMLF 20 40 50 60 70 80 90 100 110 120
2 Vertical Throw 4 14 17 18 20 21 23 24 25 26
Horizontal NC <15 <15 <15 <15 21 25 27 29 31 33
LINEAR DIFFUSERS
Vertical NC <15 <15 <15 <15 <15 <15 15 17 19 21
AND GRILLES
CFMLF 30 60 75 90 105 120 135 150 165 180
3 Vertical Throw 4 17 21 23 24 26 28 29 31 32
Horizontal NC <15 <15 <15 17 22 27 28 30 32 34
Vertical NC <15 <15 <15 <15 <15 15 16 18 20 22
CFMLF 40 80 100 120 140 160 180 200 220 240
4 Vertical Throw 5 20 24 26 28 30 32 34 35 37

Horizontal NC <15 <15 15 19 24 29 30 32 34 36
Vertical NC <15 <15 <15 <15 <15 17 18 20 22 24

MODEL 6610RSP 1" SLOT WIDTH
Negative Ps
Number of
Slots Inches of Water .020 .040 .060 .080 .100 .150
CFM/ft. 35 50 60 70 80 95
1
NC - 25 31 36 40 45
CFM/ft. 70 100 125 140 155 190
2
6600SP
NC - 27 33 37 41 47
CFM/ft. 105 150 185 210 235 285
3
NC - 29 35 39 43 49
CFM/ft. 140 200 250 280 310 380
4
NC - 31 37 41 45 51

DEFINITION OF UNITS

Length (feet) 2 4 6
Length (feet) 2 4 8
LINEAR DIFFUSERS

AND GRILLES

1
6600SP
MODEL 6600SQ
The 6600SQ series' unique design combines a ceiling tile (by others)
placed into the face of the diffuser. The unit provides a full 180 air
pattern adjustment and tight horizontal air patterns.
Designed to accept all popular ceiling tiles
Available in 1-4 slots with 1/2", 3/4" or 1" slot widths
1 1/2" slot width available in 1 and 2 slots only
Available with insulation (Model 6600SQI)
Available without pattern controllers as a return (Model 6600SQR)
Optional metal face welded or shipped loose
LINEAR DIFFUSERS
AND GRILLES
6600SQ
Slot 1 Slot 2 Slot 3 Slot 4 Slot

Model Width A A A A
6650SQ-6 1/2 2 3/4 4 5 1/4 6 1/2
6675SQ-6 3/4 3 4 1/2 6 7 1/2
6610SQ-6 1 3 1/4 5 6 3/4 8 1/2
6615SQ-6 1 1/2 3 3/4 6 N/A N/A

SERIES 6600SQ SPECIFICATIONS
LINEAR SLOT DIFFUSER Performance Specification
MODULAR ALUMINUM The manufacturer shall provide published performance
MODELS 6600SQ/6600SQI/6600SQR data. Data shall be tested in accordance to ANSI/
Air diffusers shall be supply models 6600SQ (non- ASHRAE Standard 70-2006.
insulated) and 6600SQI (insulated) or return model
6600SQR manufactured by METALAIRE. Units shall be Paint Specification
constructed of heavy gauge extruded aluminum. Diffusers Process shall be anodic electro-deposition using an
shall have 1-4 slots with 1/2", 3/4" or 1" slot widths and anodic acrylic paint. Units shall undergo pre-treatment
1 1/2" slot widths available with 1 or 2 slots. The units including a pressurized spray stage using an alkaline
shall be the size and quantity as outlined in the plans cleaner and a de-ionized water rinse.
and specifications.
The supply units shall be square face ceiling diffusers
and shall have a factory installed backpan. The backpan
LINEAR DIFFUSERS
must be of sufficient height to allow the center tile (by

AND GRILLES
the ceiling system manufacturer) to be installed from

the diffuser face without dissembling the face from
the backpan. Devices without back pan attached to the
diffuser face will not be allowed. The pattern controllers
shall be curved aerodynamically shaped, capable of
adjustment form the face of the diffuser. The pattern
controllers shall allow adjustment from vertical to
horizontal patterns as well as damper the volume
through the face of the diffuser. Pattern controllers
shall be aluminum construction. Steel pattern controllers
are not acceptable.

The return units shall be square face ceiling diffusers
and shall have a factory attached light shield. The light
shield must be of sufficient height to allow center tile (by
the ceiling system manufacturer) to be installed from
the diffuser face without dissembling the face from the
light shield. Devices without light shield attached to
the diffuser face will not be allowed. The face shall be
designed to match the appearance of the supply unit.
6600SQ
SERIES 6600SQ MODEL NUMBER SPECIFICATION
SUPPLY - MODULAR SLOT ARCHITECTURAL DIFFUSER
MODEL 6600SQ
Model Slot Width # of Slots Inlet Size Module
6600SQ-6 T-bar Lay-in 1/2 1 6
6600SQi T-bar Lay-in Insulated 3/4 2 8
6600SQ-8 Tegular T-bar 1 3 10
24 x 24
6600SQI-8 Tegular T-bar Insulated 4 12
6600SQ-9 Donn Fineline 1
1 1/2
6600SQI-9 Donn Fineline Insulated 2

Standard D3 Aluminum Radial Opposed Blade Damper
LINEAR DIFFUSERS
20 White Face w/ Black PC G3 Equlaizing Grid
AND GRILLES
Optional BDS Butterfly Damper
21 Clear Anodize Face w/ Black PC RSD Radial Shutter Damper
28 Custom Color TBPF T-Bar Plaster Frame
RETURN MODULAR SLOT ARICHITECTURAL DIFFUSER

MODEL 6600SQR
Model Slot Width # Slots Module Available Finishes
6600SQR-6 T-bar Lay-in 1/2 1 Standard

6600SQR-8 Tegular T-bar 3/4 2 20 White Face w/ Black PC
6600SQR-9 Donn Fineline 1 3 Optional
24 x 24
4 21 Clear Anodize Face w/ Black PC
1 28 Custom Color
1 1/2
2
6600SQ

SERIES 6600SQ PERFORMANCE DATA
MODEL 6600SQ 1" SLOTWIDTH
CFM 100 150 200 250 300 350
Throw 3-5-10 5-7-13 6-9-15 8-12-18 9-14-20 11-16-22
1 Slot
Pt 0.023 0.046 0.080 0.122 0.172 0.228
8" Inlet
Ps 0.017 0.034 0.059 0.090 0.125 0.165
NC - - 27 30 38 44
CFM 150 200 250 330 350 400
Throw 2-4-10 3-6-12 5-8-15 7-10-17 8-13-21 8-15-24
2 Slot
Pt 0.030 0.050 0.074 0.103 0.137 0.169
10" Inlet
Ps 0.025 0.041 0.061 0.084 0.110 0.135
NC - - 22 28 35 39
CFM 200 250 300 350 400 450
LINEAR DIFFUSERS
Throw 4-5-10 5-7-13 6-8-16 7-9-19 8-11-21 9-13-23

AND GRILLES
3 Slot
Pt 0.028 0.042 0.055 0.074 0.090 0.117
12" Inlet
Ps 0.023 0.035 0.046 0.061 0.074 0.094
NC - - 20 25 29 34
CFM 250 300 350 400 450 500
Throw 4-5-10 5-7-13 6-8-15 7-10-19 7-11-20 8-12-22
4 Slot
Pt 0.034 0.048 0.059 0.071 0.091 0.107
8" Inlet
Ps 0.027 0.038 0.045 0.55 0.68 0.081
NC - 20 23 27 30 33
6600SQ
MODEL 6600SQ 3/4" SLOT WIDTH
CFM 50 100 150 200 250 300
Throw 2-3-5 3-5-9 4-8-13 6-10-16 8-12-18 10-15-20
1 Slot
Pt 0.013 0.039 0.083 0.145 0.219 0.319
6" Inlet
Ps 0.011 0.033 0.071 0.125 0.187 0.272
NC - - 20 28 32 39
CFM 100 150 200 250 300 350
Throw 2-4-7 3-6-10 5-8-13 6-10-16 7-12-18 8-14-20
2 Slot
Pt 0.015 0.033 0.068 0.087 0.124 0.172
10" Inlet
Ps 0.013 0.026 0.049 0.074 0.105 0.145
NC - - 20 24 26 31
CFM 150 200 250 300 350 400
LINEAR DIFFUSERS
Throw 3-4-9 4-5-12 5-7-15 6-9-17 7-11-19 8-13-22
AND GRILLES
3 Slot
Pt 0.023 0.040 0.051 0.078 0.117 0.149
10" Inlet
Ps 0.018 0.031 0.048 0.059 0.090 0.115
NC - - 22 25 28 32
CFM 200 250 300 350 400 450
Throw 3-4-8 4-5-11 6-9-15 7-10-18 8-11-20 8-13-22
4 Slot
Pt 0.025 0.038 0.064 0.075 0.092 0.117
12" Inlet
Ps 0.021 0.031 0.044 0.062 0.075 0.094
NC - - - 22 25 28

6600SQ

MODEL 6600SQ 1/2" SLOT WIDTH
CFM 50 100 150 175 200 225
Throw 4-6-8 6-10-15 8-13-19 12-17-22 15-20-29 18-24-35
1 Slot
Pt 0.028 0.102 0.227 0.302 0.37 0.42
6" Inlet
Ps 0.023 0.086 0.19 0.251 0.305 0.42
NC - 27 35 41 48 52
CFM 75 125 150 200 250 275
Throw 3-5-7 4-7-10 5-8-12 7-10-15 9-3-19 11-18-22
2 Slot
Pt 0.034 0.059 0.122 0.021 0.312 0.39
8" Inlet
Ps 0.03 0.051 0.11 0.18 0.28 0.35
NC - - 24 29 38 45
CFM 100 150 200 225 250 300
LINEAR DIFFUSERS
Throw 2-4-5 3-6-7 5-8-11 6-9-13 7-10-15 9-12-18

AND GRILLES
3 Slot
Pt 0.042 0.088 0.146 0.187 0.222 0.312
8" Inlet
Ps 0.036 0.076 0.125 0.16 0.19 0.265
NC - - 21 27 35 43
CFM 150 200 250 275 300 350
Throw 3-5-6 5-7-8 7-10-12 8-11-14 9-13-17 11-15-21
4 Slot
Pt 0.061 0.103 0.153 0.191 0.209 0.282
10" Inlet
Ps 0.056 0.094 0.14 0.175 0.19 0.255
NC - 22 28 32 37 40
PERFORMANCE NOTES FOR SERIES 6600SQ

DEFINITION OF UNITS
Horizontal throw Throw distance in feet at terminal velocities of 150, 100 and 50fpm.
NC Noise criterion, sound pressure level. NC ratings are based on sound power level
(Lw) re: 10-12 watts minus a 10 dB room attenuation in all octave bands
6600SQ
MODEL UP6600
Model UP6600 Boot Plenum is an easily installed, economical
accessory to the 6600 Linear Slot Diffuser. UP6600 Boot Plenums
are designed to connect the series 6600 to the ducted supply or
return. Factory supplied units reduce both job site fabrication and
installation labor.
Units provide an even distribution of air into the diffuser to maximize inductions and occupant comfort
Available widths to fit 6600 with 1 to 8 slots
Standard lengths are 24", 36", 48", 60" and 72"
UPI6600 is fully insulated including the end caps. Optional Thermopure insulation is available.
External insulation also available

Submittal: UP/UPI 2000
Available with optional LQ, locking quadrant damper, ID, inlet damper, or FODR, face operated damper
LINEAR DIFFUSERS
Architectural Linear
UP6600 is shipped Diffusers
separately from the 6600 linear slot diffuser and requires field attachment
AND GRILLES
LBG - Linear Bar Grilles Plenum
Models: UP/UPI Universal Plenum
W 1
2 1/8 2
1
2 A
10.5
3

Oval Width (B) 3
4
Optional
Plenum Length = Listed Size
Internal
Insulation Inlet Chart
Size TypeInlet Chart
A B
6 Round 5 7/8
Size Type A B
8 Oval 5 7/8 8 15/16
3/8 1/4 10 6 Round
Oval 5 57/8
7/8 12 1/16
12 8 Oval 5 7/8 15 1/4
Oval 5 7/8 8 15/16
14 Oval 5 7/8 18 7/16
10 Oval 5 7/8 12 1/16
12 2000H,2100H,
Oval 5 7/8 15 1/4 2000H, 2100H,
2300H, 2400H 2300H, 2400H
14 Oval 5 7/8 18 7/16
UP6600
LINEAR BAR DIM W LINEAR BAR DIM W

GRILLES WIDTH (O.D. WIDTH) GRILLES WIDTH (O.D. WIDTH)
1.5 1.875 13 13.375
2 2.375 13.5 13.875
2.5 2.875 14 14.375
3 3.375 14.5 14.875
3.5 3.875 15 15.375
4 4.375 15.5 15.875
4.5 4.875 16 16.375
5 5.375 16.5 16.875
5.5 5.875 17 17.375
6 6.375 17.5 17.875
6.5 6.875 18 18.375
7 7.375 18.5 18.875
7.5 7.875 19 19.375
8 8.375 19.5 19.875
8.5 8.875 20 20.375
9 9.375 20.5 20.875
2013 Metal Industries, Inc. 9.5 9.875 21 21.375 LDG111
10 10.375 21.5 21.875
40-7/42-7 40-7/42-7
Model 40-8/42-8 12-1/11-1 Model 40-8/42-8 12-1/11-1
6650 20-6 22-6 30-3 32-6 40-9/42-9 10-6/12-6 6675 20-6 22-6 30-3 32-6 40-9/42-9 10-6/12-6
Number DIM W DIM W DIM W DIM W Number DIM W DIM W DIM W DIM W
of Slots (I.D. Width) (I.D. Width) (I.D. Width) (I.D. Width) of Slots (I.D. Width) (I.D. Width) (I.D. Width) (I.D. Width)
1 2 3/16 2 1/2 2 1/16 2 1/4 1 2 5/16 2 3/4 2 5/16 2 1/2
2 3 5/16 3 5/8 3 5/16 3 1/2 2 3 13/16 4 3/16 3 13/16 4
3 4 11/16 4 1/2 4 9/16 4 3/4 3 5 1/2 5 3/4 5 /16 5 1/2
4 5 7/8 6 3/16 5 13/16 6 4 7 1/8 7 1/4 6 13/16 7
5 7 1/16 8 3/8 7 1/16 7 1/4 5 8 5/16 8 5/8 8 3/16 8 1/2
6 8 5/8 8 7/8 8 5/16 8 7/16 6 9 13/16 10 1/8 9 13/16 13 13/16
7 9 15/16 10 1/4 9 5/8 9 3/4 7 11 5/16 11 5/8 11 5/16 11 7/16
8 13 13/16 11 1/8 11 1/8 11 8 12 3/4 13 1/16 12 7/8 13
LINEAR DIFFUSERS
40-7/42-7
AND GRILLES
Model 40-8/42-8 12-1/11-1

6610 20-6 22-6 30-3 32-6 40-9/42-9 10-6/12-6
Number DIM W DIM W DIM W DIM W
of Slots (I.D. Width) (I.D. Width) (I.D. Width) (I.D. Width)
1 2 5/8 2 15/16 2 9/16 2 3/4
2 4 7/16 4 3/4 3 3/8 4 1/2
3 6 1/8 6 1/2 6 1/16 6 1/8
4 7 7/8 8 3/16 7 13/16 8
5 9 3/4 10 1/16 9 5/8 9 11/16
6 1 3/8 11 3/4 11 3/8 11 1/2
7 14 1/4 13 9/16 13 1/8 13 13/16

8 15 15 1/4 14 7/8 14 15/16
Frame Styles
Length = L =Listed Size Linear End Types
Description UP/UPI Border Size 2 EB 1 EB No Ends 2 EC 1 EC
T-Bar Lay-in 12 - 6 1 - 1/8 -2 1/2 -1 3/8 0 - 3/16 -7/8
Screw Mount 11 - 1 Not Recommended For This Frame Style
Concealed Mount 12 - 1 1 - 1/8 0 0 0 NR** NR**
T-Bar Lay-in 22 - 6 3/4 -1 3/4 -1 0 NR** NR**
T-Bar Lay-in 32 - 6 1/2 -1 1/4 -3/4 0 NR** NR**
Concealed Spline 42 - 7 22/32 -7/8 -9/16 0 NR** NR**
UP6600
Drop Face 42 - 8 22/32 -7/8 -9/16 0 NR** NR**

Bolt Slot 42 - 9 22/32 -7/8 -9/16 0 NR** NR**
Sub Plaster Frame 22 - 73 3/4 -1 3/8 -1 0 NR** NR**
Sub Plaster/Wall Frames 22 - 74 3/4 -1 3/8 -1 0 NR** NR**
Sub Wall Frames 22 - 75 3/4 -1 3/8 -1 0 NR** NR**
Note: ** Not Recommended End Type For This Style
UP6600 MODEL NUMBER SPECIFICATION
MODEL UP6600
Screw Mounted 1 1/8 UP6600-11-1
1 1/8 UP6600-12-6 UP6600-12-1
3/4 UP6600-22-6
Concealed Mtg Hardware 1/2 UP6600-32-6
25/32 UP6600-42-7 UP6600-42-8 UP6600-42-9 UP6600-52-1
1 1/8 UP6600-10-6
3/4 UP6600-20-6
No Mtg. Hardware 1/2 UP6600-30-6
25/32 UP6600-40-7 UP6600-40-8 UP6600-40-9 UP6600-50-1
LINEAR DIFFUSERS
AND GRILLES
Concealed Spline Concealed Wall Mtg Concealed Spline
3/4" Border UP6600-22-73 3/4" Border UP6600-22-74 3/4" Border UP6600-22-75
UP6600 MODEL NUMBER SPECIFICATION

MODEL UPI6600

Screw Mounted 1 1/8" UPI6600-11-1
1 1/8" UPI6600-12-6 UPI6600-12-1
3/4" UPI6600-22-6
Concealed Mtg Hardware 1/2" UPI6600-32-6
25/32" UPI6600-42-7 UPI6600-42-8 UPI6600-42-9 UPI6600-52-1
1 1/8" UPI6600-10-6
3/4" UPI6600-20-6
No Mtg Hardware 1/2" UPI6600-30-6
25/32" UPI6600-40-7 UPI6600-40-8 UPI6600-40-9 UPI6600-50-1
UP6600
Concealed Spline Concealed Wall Mtg Concealed Spline

3/4" Border UPI6600-22-73 3/4" Border UPI6600-22-74 3/4" Border UPI6600-22-75

SERIES 6600 UP/UPI PERFORMANCE DATA
MODEL UP/UPI6600-50 1 SLOT
CFM 15 30 45 60 75 90 105
2' Length
Static Pressure .010 .038 .086 .153 .240 .345 .470

Horizontal Throw 1-3-9 6-9-18 9-13-23 12-18-27 15-21-30 18-23-33 20-25-35
NC <15 20 28 35 41 45 47
6" Inlet
CFM 30 60 90 120 150 180 210

4' Length
Static Pressure .016 .063 .142 .252 .394 .567 .772

NC <15 24 34 41 45 46 49
CFM 20 35 50 65 80 95 110
2' Length
Static Pressure .018 .054 .110 .185 .281 .396 .531

LINEAR DIFFUSERS
NC <15 18 27 33 38 42 44
8" Inlet
AND GRILLES
CFM 40 70 100 130 160 190 220

4' Length
Static Pressure .018 .056 .115 .194 .294 .415 .556

NC <15 24 33 39 43 45 45
CFM 30 45 60 75 90 105 120
2' Length
Static Pressure .056 .126 .225 .351 .505 .688 .899

10" Inlet
NC <15 22 29 34 39 42 43
CFM 60 90 120 150 180 210 240

4' Length
Static Pressure .036 .082 .146 .227 .328 .446 .582

NC 19 27 34 40 45 48 51
CFM 45 60 75 90 105 120 135
2' Length
Static Pressure .047 .083 .129 .186 .254 .331 .419

12" Inlet
NC 24 28 32 35 39 42 45
CFM 90 120 150 180 210 240 270
4' Length
Static Pressure .098 .175 .273 .393 .535 .699 .884

NC 23 30 36 41 45 48 51
UP6600
CFM 20 40 60 80 100 120 140
2' Length
Static Pressure .007 .028 .064 .114 .178 .256 .349

NC <15 15 25 32 38 43 46
6" Inlet
CFM 30 60 90 120 150 180 210

4' Length
Static Pressure .010 .041 .093 .166 .259 .373 .507

NC <15 <15 24 32 37 41 43
CFM 25 45 65 85 105 125 145
2' Length
Static Pressure .007 .023 .049 .084 .128 .181 .244

LINEAR DIFFUSERS
NC <15 <15 23 29 35 39 43
8" Inlet
AND GRILLES
CFM 50 90 130 170 210 250 290
4' Length
Static Pressure .014 .045 .094 .161 .245 .348 .468

NC <15 20 29 36 41 45 46
CFM 35 55 75 95 115 135 156
2' Length
Static Pressure .013 .032 .059 .095 .139 .191 .252

10" Inlet
NC <15 17 23 29 34 38 41

CFM 70 110 150 190 230 270 310
4' Length
Static Pressure .019 .047 .088 .142 .207 .286 .377

NC <15 21 29 35 40 43 45
CFM 50 70 90 110 130 150 170
2' Length
Static Pressure .024 .047 .078 .117 .163 .217 .279

12" Inlet
NC <15 17 21 24 28 31
CFM 100 140 180 220 260 300 340
4' Length
Static Pressure .027 .053 .087 .130 .181 .241 .310

NC 16 23 29 34 38 41 43
UP6600

CFM 25 50 75 100 125 150 175
2' Length
Static Pressure .008 .033 .073 .130 .203 .293 .398

NC <15 15 24 31 36 40 43
6" Inlet
CFM 40 75 115 150 190 225 265

4' Length
Static Pressure .015 .054 .127 .216 .347 .486 .674

NC <15 <15 23 29 36 40 44
CFM 35 55 80 105 130 155 180
2' Length
Static Pressure .009 .022 .046 .079 .122 .173 .233

LINEAR DIFFUSERS
NC <15 <15 21 28 33 37 41
8" Inlet
AND GRILLES
CFM 70 110 160 210 260 310 360

4' Length
Static Pressure .021 .052 .109 .188 .289 .410 .553

NC <15 18 27 34 39 44 47
CFM 45 65 90 115 140 165 190
2' Length
Static Pressure .011 .023 .044 .072 .106 .147 .195

10" Inlet
NC <15 <15 21 27 32 36 39
CFM 90 130 180 230 280 330 380

4' Length
Static Pressure .023 .048 .091 .149 .221 .307 .407

NC <15 20 27 33 38 42 45
CFM 65 85 110 135 160 185 210
2' Length
Static Pressure .022 .038 .063 .095 .133 .178 .229

12" Inlet
NC <15 16 20 23 26 29 32
CFM 130 170 220 270 320 370 420
4' Length
Static Pressure .027 .046 .077 .117 .164 .219 .282

NC 17 22 27 33 37 41 44
UP6600
CFM 40 65 90 115 140 165 190
2' Length
Static Pressure .018 .047 .090 .147 .218 .302 .401

NC <15 16 24 30 36 39 42
6" Inlet
CFM 60 100 <15 175 210 250 285

4' Length
Static Pressure .031 .087 .159 .267 .385 .546 .709

NC <15 16 24 31 35 37 37
CFM 50 80 110 140 170 200 230
2' Length
Static Pressure .014 .036 .069 .112 .164 .228 301

LINEAR DIFFUSERS
NC <15 17 24 30 35 39 42
8" Inlet
AND GRILLES
CFM 75 120 165 210 255 300 345
4' Length
Static Pressure .022 .056 .107 .173 .255 .353 .467

NC <15 16 23 29 34 38 40
CFM 60 90 120 150 180 210 240
2' Length
Static Pressure .014 .032 .056 .088 .127 .173 .226

10" Inlet
NC <15 17 23 29 33 37 41

CFM 95 135 180 225 270 315 360
4' Length
Static Pressure .021 .043 .077 .120 .174 .236 .308

NC <15 16 23 28 33 36 39
CFM 80 120 160 200 240 280 320
2' Length
Static Pressure .018 .041 .073 .114 .164 .223 .292

12" Inlet
NC <15 <15 20 24 28 32 35
CFM 120 180 240 300 360 420 480
4' Length
Static Pressure .018 .040 .071 .111 .159 .217 .283

NC <15 19 25 31 35 39 42
UP6600

CFM 20 35 50 65 80 95 110
2' Length
Static Pressure .014 .043 .088 .148 .224 .316 .424

NC <15 18 26 32 37 41 45
6" Inlet
CFM 30 55 75 97.5 120 145 165

4' Length
Static Pressure .009 .026 .054 .091 .137 .194 .259

NC <15 18 25 30 36 40 44
CFM 25 40 55 70 85 100 115
2' Length
Static Pressure .036 .093 .175 .284 .419 .580 .767

LINEAR DIFFUSERS
NC <15 17 24 30 35 39 41
8" Inlet
AND GRILLES
CFM 40 60 85 105 130 150 175

4' Length
Static Pressure .014 .032 .065 .099 .152 .202 .275

NC <15 17 24 29 34 38 42
CFM 35 45 55 65 75 85 95
2' Length
Static Pressure .085 .140 .210 .293 .390 .501 .625

10" Inlet
NC <15 17 22 26 30 33 35
CFM 55 70 85 100 115 130 145

4' Length
Static Pressure .028 .045 .066 .092 .122 .155 .193

NC <15 17 21 25 28 31 34
CFM 65 85 110 135 160 185 210
2' Length
Static Pressure .022 .038 .063 .095 .133 .178 .229

12" Inlet
NC <15 16 20 23 26 29 32
CFM 130 170 220 270 320 370 420
4' Length
Static Pressure .027 .046 .077 .117 .164 .219 .282

NC 17 22 27 33 37 41 44
UP6600
MODEL UP/UPI6600 -75 2 SLOT
CFM 30 55 80 105 130 155 180
2' Length
Static Pressure .009 .029 .061 .105 .161 .228 .308

NC <15 18 27 33 39 42 44
6" Inlet
CFM 45 85 120 160 195 235 270

4' Length
Static Pressure .009 .033 .065 .116 .172 .250 .330

NC <15 18 25 33 37 41 43
CFM 45 65 85 105 125 145 165
2' Length
Static Pressure .007 .023 .049 .084 .128 .181 .244

LINEAR DIFFUSERS
NC <15 <15 23 29 35 39 43
8" Inlet
AND GRILLES
CFM 70 100 130 160 190 220 250
4' Length
Static Pressure .014 .028 .047 .071 .100 .135 .174

NC <15 17 23 28 33 37 39
CFM 50 70 90 110 130 150 170
2' Length
Static Pressure .023 .045 .074 .111 .155 .207 .265

10" Inlet
NC <15 17 22 27 32 35 38

CFM 75 105 135 165 195 225 255
4' Length
Static Pressure .025 .050 .082 .123 .171 .228 .293

NC <15 16 21 26 30 34 37
CFM 73 95 120 145 170 195 220
2' Length
Static Pressure .021 .036 .058 .084 .116 .152 .194

12" Inlet
NC <15 18 21 25 28 31 34
CFM 110 145 180 220 255 295 330
4' Length
Static Pressure .025 .044 .068 .102 .137 .183 .229

NC <15 20 24 29 33 36 39
UP6600

CFM 45 70 95 120 145 170 195
2' Length
Static Pressure .012 .029 .053 .084 .122 .168 .221

NC <15 17 24 30 35 39 41
6" Inlet
CFM 70 105 145 180 220 255 295

4' Length
Static Pressure .017 .037 .071 .110 .165 .221 .296

NC <15 17 24 29 34 38 41
CFM 55 85 115 145 175 205 235
2' Length
Static Pressure .012 .029 .054 .082 .124 .171 .224

LINEAR DIFFUSERS
NC <15 18 25 30 35 39 42
8" Inlet
AND GRILLES
CFM 85 130 175 220 265 310 355

4' Length
Static Pressure .013 .031 .057 .090 .130 .178 .233

NC <15 18 24 30 34 39 42
CFM 65 100 130 160 190 220 250
2' Length
Static Pressure .015 .037 .062 .094 .132 .177 .229

10" Inlet
NC <15 19 25 30 34 38 41
CFM 100 150 195 240 285 330 375

4' Length
Static Pressure .018 .041 .070 .105 .149 .199 .257

NC <15 18 24 29 34 37 40
CFM 85 120 155 190 225 260 295
2' Length
Static Pressure .022 .043 .072 .108 .152 .203 .261

12" Inlet
NC <15 <15 18 22 26 30 33
CFM 130 180 235 285 340 390 445
4' Length
Static Pressure .016 .031 .053 .078 .111 .146 .190

NC <15 18 24 29 33 37 39
UP6600
CFM 50 80 110 140 170 200 230
2' Length
Static Pressure .011 .029 .055 .089 .131 .181 .239

NC <15 16 23 30 35 39 43
6" Inlet
CFM 75 120 165 210 255 300 345

4' Length
Static Pressure .016 .042 .079 .129 .190 .263 .348

NC <15 16 23 29 34 37 39
CFM 70 100 130 160 190 220 250
2' Length
Static Pressure .016 .042 .079 .129 .190 .263 .348

LINEAR DIFFUSERS
NC <15 18 24 29 33 37 39
8" Inlet
AND GRILLES
CFM 105 150 195 240 285 330 375
4' Length
Static Pressure .017 .034 .057 .086 .122 .163 .211

NC <15 17 23 28 32 36 39
CFM 80 110 140 170 200 230 260
2' Length
Static Pressure .014 .027 .044 .065 .090 .119 .152

10" Inlet
NC <15 17 23 27 32 35 38

CFM 125 165 210 255 300 345 390
4' Length
Static Pressure .017 .030 .049 .072 .099 .131 .167

NC <15 16 22 26 30 34 37
CFM 100 140 180 220 260 300 340
2' Length
Static Pressure .007 .014 .023 .034 .047 .063 .081

12" Inlet
NC <15 16 20 23 26 29 32
CFM 150 210 270 330 390 450 510
4' Length
Static Pressure .014 .028 .046 .069 .096 .128 .164

NC <15 19 24 28 32 36 39
UP6600

CFM 30 45 60 75 90 105 120
2' Length
Static Pressure .013 .029 .052 .082 .117 .160 .209

NC 16 23 30 35 40 44 46
6" Inlet
CFM 45 70 90 115 135 160 180

4' Length
Static Pressure .012 .029 .048 .078 .107 .151 .191

NC 16 23 29 34 39 43 46
CFM 40 50 65 80 95 110 125
2' Length
Static Pressure .032 .051 .085 .129 .182 .244 .316

LINEAR DIFFUSERS
NC 17 22 28 33 38 40 42
8" Inlet
AND GRILLES
CFM 60 75 100 120 145 165 190

4' Length
Static Pressure .017 .026 .047 .068 .099 .128 .170

NC 17 21 28 32 37 40 43
CFM 40 55 70 85 100 115 130
2' Length
Static Pressure .044 .083 .134 .197 .273 .361 .461

10" Inlet
NC 16 24 30 35 38 39 39
CFM 60 85 105 130 150 175 195

4' Length
Static Pressure .016 .033 .050 .076 .102 .138 .172

NC <15 21 26 31 35 30 41
CFM 48 65 80 95 110 125 140
2' Length
Static Pressure .018 .033 .050 .071 .095 .123 .154

12" Inlet
NC <15 <15 19 23 26 29 32
CFM 70 100 120 145 165 190 210
4' Length
Static Pressure .029 .058 .084 .123 .159 .211 .258

NC <15 21 25 30 33 35 37
UP6600
CFM 30 55 80 105 130 155 180
2' Length
Static Pressure .006 .020 .042 .072 .110 .156 .211

NC <15 18 27 33 39 42 44
6" Inlet
CFM 45 85 120 160 15 235 270

4' Length
Static Pressure .009 .031 .061 .109 .162 .235 .310

NC <15 18 25 33 37 41 43
CFM 45 65 85 105 125 145 165
2' Length
Static Pressure .017 .035 .059 .090 .128 .172 .223

LINEAR DIFFUSERS
NC <15 18 24 29 33 37 40
8" Inlet
AND GRILLES
CFM 70 100 130 160 190 220 250
4' Length
Static Pressure .014 .028 .047 .071 .100 .135 .174

NC <15 17 23 28 33 37 39
CFM 50 70 90 110 130 150 170
2' Length
Static Pressure .023 .045 .074 .111 .155 .207 .265

10" Inlet
NC <15 17 22 27 32 35 38

CFM 75 105 135 165 195 225 255
4' Length
Static Pressure .012 .024 .039 .059 .082 .109 .140

NC <15 16 21 26 30 34 37
CFM 60 90 120 150 180 210 240
2' Length
Static Pressure .014 .032 .058 .090 .130 .176 .230

12" Inlet
NC <15 17 21 26 29 33 36
CFM 90 135 180 225 270 315 360
4' Length
Static Pressure .017 .038 .068 .106 .153 .208 .272

NC <15 18 24 30 34 38 41
UP6600

CFM 40 65 90 115 140 165 190
2' Length
Static Pressure .007 .019 .036 .058 .087 .120 .160

NC <15 16 23 29 34 38 41
6" Inlet
CFM 60 100 135 175 210 250 285

4' Length
Static Pressure .011 .030 .055 .093 .134 .190 .247

NC <15 16 22 28 33 37 40
CFM 50 80 110 140 170 200 230
2' Length
Static Pressure .010 .026 .049 .080 .117 .162 .215

LINEAR DIFFUSERS
NC <15 17 24 29 34 38 42
8" Inlet
AND GRILLES
CFM 75 120 165 210 255 300 345

4' Length
Static Pressure .008 .022 .041 .066 .098 .135 .179

NC <15 17 23 28 33 38 41
CFM 60 110 140 170 200 230 260
2' Length
Static Pressure .008 .028 .045 .056 .092 .122 .155

10" Inlet
NC <15 21 27 32 36 39 42
CFM 90 165 210 255 300 345 390

4' Length
Static Pressure .008 .026 .042 .062 .086 .113 .145

NC <15 20 26 31 35 38 40
CFM 80 120 160 200 240 280 320
2' Length
Static Pressure .010 .022 .038 .060 .086 .118 .154

12" Inlet
NC <15 <15 19 23 28 31 35
CFM 120 180 240 300 360 420 480
4' Length
Static Pressure .009 .021 .038 .059 .084 .115 .150

NC <15 18 25 30 35 38 41
UP6600
CFM 50 80 110 140 170 200 230
2' Length
Static Pressure .009 .022 .042 .069 .101 .140 .185

NC <15 16 23 30 35 39 43
6" Inlet
CFM 75 120 165 210 255 300 345

4' Length
Static Pressure .012 .032 .060 .098 .144 .200 .264

NC <15 16 23 29 34 37 39
CFM 70 100 130 160 190 220 250
2' Length
Static Pressure .017 .035 .059 .090 .126 .169 .219

LINEAR DIFFUSERS
NC <15 18 24 29 33 37 39
8" Inlet
AND GRILLES
CFM 105 150 195 240 285 330 375
4' Length
Static Pressure .013 .027 .045 .068 .096 .129 .166

NC <15 19 26 32 36 40 42
CFM 80 120 160 200 240 280 320
2' Length
Static Pressure .010 .022 .038 060 .086 .118 .154

10" Inlet
NC <15 19 26 32 36 40 42

CFM 125 180 240 300 360 420 480
4' Length
Static Pressure .012 .025 .044 .069 .100 .136 .178

NC <15 18 25 30 35 39 42
CFM 90 140 190 240 290 340 390
2' Length
Static Pressure .007 .017 .031 .050 .073 .101 .132

12" Inlet
NC <15 16 21 25 28 32 35
CFM 135 210 285 360 435 510 585
4' Length
Static Pressure .008 .020 .038 .060 .088 .120 .158

NC <15 19 25 30 35 39 42
UP6600

DEFINITION OF UNITS

Length (feet) 2 4 6
Length (feet) 2 4 8
LINEAR DIFFUSERS

AND GRILLES

1
UP6600
SERIES 6600 UP/UPI RETURN PERFORMANCE DATA
MODEL UP/UPI6600-50 DUCT CONNECTED
CFM 15 20 25 30 35 40
1
NC - 20 27 32 37 41
CFM 35 50 60 70 80 95
2
NC - 22 27 32 37 41
CFM 55 80 95 110 125 150
3
NC - 23 28 33 37 42
CFM 70 100 120 140 155 190
4
NC - 24 30 34 37 44
CFM 90 135 155 180 200 245
5
NC - 25 30 34 37 44
LINEAR DIFFUSERS
CFM 110 155 195 220 245 300
AND GRILLES
6
NC - 26 33 37 40 96
CFM 130 185 225 260 290 365
7
NC - 27 33 37 41 47
CFM 140 200 245 280 310 385
8
NC - 28 34 38 42 48

NUMBER OF NEGATIVE PS
CFM 25 35 45 50 55 70
1
NC - 21 29 32 35 42
CFM 55 80 90 100 110 135
2
NC - 25 29 32 35 42
CFM 90 115 140 160 180 220
3
NC - 26 32 36 40 46
CFM 100 140 175 200 225 275
4
NC - 27 34 38 41 47
CFM 140 185 225 260 290 360
5
UP6600
NC - 28 34 38 42 48
CFM 160 225 275 320 360 440
6
NC - 29 35 40 43 49
CFM 175 250 305 350 395 480
7
NC - 30 36 40 44 50
CFM 200 285 350 400 450 545
8
NC - 31 37 41 45 51

NUMBER OF NEGATIVE PS
CFM 35 50 60 70 80 95
1
NC - 25 31 36 40 45
CFM 70 100 125 140 155 190
2
NC - 27 33 37 41 47
CFM 105 150 185 210 235 285
3
NC - 29 35 39 43 49
CFM 140 200 250 280 310 380
4
NC - 31 37 41 45 51
CFM 175 250 300 350 390 475
5
NC - 32 38 42 46 52
LINEAR DIFFUSERS
CFM 210 300 375 420 465 570

AND GRILLES
6
NC - 33 40 43 47 53
CFM 245 350 425 490 545 665
7
NC - 34 41 44 47 54
CFM 280 400 475 560 620 760
8
NC - 35 42 45 48 55
UP6600
LINEAR BAR GRILLES
The METALAIRE line of linear bar grilles is designed for installation in sidewall, sill or floor and
can be used for supply or return air.
2000 BAR GRILLES UP2000 PLENUM
LINEAR DIFFUSERS
AND GRILLES
2000 Bar Grilles. The 2000 series of linear bar grilles and registers is
constructed of high grade aluminum extrusion and is available in a variety of
core and border styles.
2000 1" border 7/32" bars 1/2" centers
2100 1/2" border 7/32" bars 1/2" centers
2200F 3/16" border 7/32" bars 1/2" centers
LINEAR BAR GRILLES

2300 1" border 1/8" bars 1/4" centers PAGE 132
2400 1/2" border 1/8" bars 1/4" centers
2500 1" border 1/8" bars 1/2" centers
UP2000 Plenum. The UP2000 universal plenum is constructed of galvanized

steel and is available with or without insulation.
UP2000 Uninsulated plenum
UPI2000 Insulated plenum PAGE 159

Series 2000 - 1 borders - 7/32 bars - 1/2 centers
Wall Mounted Core Only Floor Mounted
2000 - 0 Deflection 2000CO - 0 Deflection 2000F - 0 Deflection
Concealed Mounting Hanger Plaster Wall & Ceiling With Subframe

2000H - 0 Deflection 2000HP - 0 Deflection
Series 2100 - 1/2 borders - 7/32 bars - 1/2 centers

Wall Mounted Concealed Mounting Hanger Concealed Spline Subframe
LINEAR DIFFUSERS
2100 - 0 Deflection 2100H - 0 Deflection 2100HP - 0 Deflection

AND GRILLES

Narrow Subframe Combination Subframe

2100HW - 0 Deflection 2100HC- 0 Deflection
2115HW - 15 Deflection 2115HC - 15 Deflection
2130HW - 30 Deflection 2130HC - 30 Deflection

LINEAR BAR GRILLES
Non Flanged Floor Mounting Non Flanged Floor Mounting Pencil Proof
2200F - 0 Deflection 2200FP - 0 Deflection
Wall Mounted Core Only Floor Mounted
Concealed Mounting Hanger Spline Subframe Concealed Floor Mount

2300H - 0 Deflection 2300HP - 0 Deflection 2300FH - 0 Deflection

Wall Mounted Concealed Mounting Hanger Spline Subframe
LINEAR DIFFUSERS
2400 - 0 Deflection 2400H - 0 Deflection 2400HC - 0 Deflection
AND GRILLES
Concealed Spline Subframe Narrow Subframe

2400HP - 0 Deflection 2400HW - 0 Deflection
LINEAR BAR GRILLES

Wall Mounted
2500 - 0 Deflection
2515 - 15 Deflection
2530 - 30 Deflection
Concealed Mounting Hanger Plaster Wall & Ceiling With Subframe

2500H - 0* Deflection 2500HP - 0* Deflection

MODEL 2000
The 2000 series linear bar grille is engineered for supply and return
air distribution, heating, cooling and ventilating applications. It is
Submittal: 2000
Linear Bar Grilles for
designed / Registers
sidewall, -floor,
1" Border
sill or ceiling application.
Extruded Aluminum
Heavy gauge -extruded
1/2" Center
aluminum construction
Models: 2000 2015 of border
Wide variety 2030 Wall
widths and Mounting
frame styles - 7/32" Bars - 0/15/30 Deflection
2000F 2015F 2030F Floor or Wall or Sill Mounting - 7/32" Bars - 0/15/30 Deflection
Complete line of accessories
2000FP 2015FP 2030FP Floor or Wall or Sill Mounting - 17/64" Bars - 0/15/30 Deflection - Pencil Proof
2000H 2015H 2030H Concealed Mounting Hanger - 7/32" Bars - 0/15/30 Deflection
2000HP 2015HP 2030HP For Plaster Wall & Ceilings - 7/32" Bars - 0/15/30 Deflection
Models: 2000, 2015, 2030 ( Wall Mounting )

Side View
Duct=Listed Width Duct Length = Listed Length
Listed Width - 41 Listed Length - 1/4
LINEAR DIFFUSERS
Alignment Spline (Typ.)

For Continuous Runs
AND GRILLES
1
12
Beveled
Border (Typ.)
1 3 1
Listed Length - 2
1 Listed Width-2 16 1 1
1
Listed length + 1 2
1
Listed Width + 1 2
Models: 2000 F, 2015 F, 2030 F, 2000 FP (Pencil Proof), 2015 FP (Pencil Proof), 2030 FP (Pencil Proof) ( Floor /Wall/Sill Mounting )
Duct =
Listed Width
Listed Side View
Width - 41 Duct Length = Listed Length
Listed Length - 41
1 1
1 16 x 8 Reinforcement Bars
2 13
16
Core Friction on Approximately 9" Centers
Retainer Spring For Continuous Runs
Listed 3 Beveled
1 1 16 Removable Core (Typ.)
Width - 2 Border (Typ.)
LINEAR BAR GRILLES
1
Listed Width + 1 2
1
* 12" Maximum Available Width 1 Listed Length - 2 1
1
Listed length + 1 2
Models: 2000H, 2015H, 2030H ( Concealed Mounting Hanger )
Duct = Listed Width

Listed Width - 1
4
Side View
Duct Length = Listed Length
Listed Length - 41 Alignment Spline (Typ.)
For Continuous Runs
5 34
43 3 Beveled
8 16 Border (Typ.)
1
Listed Length - 2
1 41 1 1
1
Listed length + 1 2
1 Listed Width - 21
Listed Width + 1 21
2000
Models: 2000 HP, 2015 HP, 2030 HP ( Spline Subframe For Plaster Wall & Ceilings )
9
Duct = Listed Width + 16
Listed Width - 41
Side View
9
5 34 Duct Length = Listed Length + 16
43 Listed Length - 41 Alignment Spline (Typ.)
8
For Continuous Runs
3
1 41 16
Beveled
Border (Typ.)
1
Listed Length - 2
1 1
Listed Width - 21 1
Listed length + 1 2
Listed Width + 1 21
Revision: C
LDG132 Date: 11/2013 Dimensions are in Inches Page: 1 of 2
Submittal: 2000/CO
Linear Bar Grilles - Core Only 2000/2100 2000P/CO
Extruded Aluminum - 7/32" Bars On 1/2" Centers
Models: 2000-CO 2000P-CO 0 Deflection
2015-CO 2015P-CO 15 Deflection
Core Only ( 2000-CO, 2015-CO and 2030-CO )

( 2000P-CO, 2015P-CO and 2030P-CO )
Submittal: 2000/CO
***2000 Cores Are Same As 2100 Cores***
Linear Bar Grilles - Core Only 2000/2100 1

2000P/CO
Extruded Aluminum - 7/32" Bars On 1/2" Centers 2
Models: 2000-CO 2000P-CO 0 Deflection Overall

Width *
Overall Length = Specified Length 13 1
Core Only ( 2000-CO, 2015-CO and 2030-CO ) 1 Cores Are Same As 2100 Cores***
32 ***2000 8
( 2000P-CO, 2015P-CO and 2030P-CO ) 13 8
1
2
Available Overall Width (Inches)Overall
Width Bars Width Bars Width BarsWidth * Width Bars
1 1/2" 2 7 1/2" Available
14 Overall Width (Inches)
13 1/2" 26 19 1/2" 38
LINEAR DIFFUSERS
2"
Width 3 8" 15 14" 27 20" 39
Overall Length =Bars Width
Specified Length Bars 13 Width Bars
1 8128
Width Bars
2 1/2" 4 8 1/2" 16 14 1/2" 20 1/2" 40
AND GRILLES
1 1/2 2 7 1/2 14 3213 1/2 26 19 1/2 38
3" 5 9" 17 15" 29 21" 41
13
2
3 1/2" 63 8
9 1/2" 1815 14
15 1/2" 3027 8 20
21 1/2" 4239
4"
2 1/2 74 10"
8 1/2 1916 16"
14 1/2 3128 22"
20 1/2 4340
4 1/2" 8 10 1/2" 20 16 1/2" 32 22 1/2" 44
5"
3
9
5 Available
11"
9 Overall
21
17 Width
17" (Inches)
15
33
29
23"
21
45
41
5Width
3 1/2
1/2" Bars
106 Width
11 91/2"
1/5 Bars
2218 Width
1715 1/3
1/2" Bars
3430 Width
2321 1/2
1/2" Bars
4642
1 1/2"
6"4 2
11 712"
1/2" 14
23 1318"
1/2" 26
35 1924"
1/2" 38
4743
7 10 19 16 31 22
2"
6 1/2" 3
12 12 8"1/2" 15
24 1814"
1/2" 27
36 20"
- 39
-
4 1/2
2 1/2" 4 8 10
813"
1/2"1/2 1620 16
1419" 1/2
1/2" 2832 22 1/2
20 1/2" 40 44
7" 13 25 37 - -
3"5 59 9"11 1721 15"
17 2933 21"23 4145
2000P-CO
3 1/2" 2015P-CO
6 9 1/2"2030P-CO 18 152000P-CO
1/2" 30 2015P-CO21 1/2" 2030P-CO
42
5 1/2 10 11 1/2 22 17 1/2 34 23 1/2 46
4" 9 7 10" 19 16" 31 15
22" 43
6 32 30
811 12 2023 18 153235 24 4447 30
LINEAR BAR GRILLES

4 1/2" 10 1/2" 16 1/2" 22 1/2"
7 6433
32 5"
6 1/2 15912 11"
12 1/2 2124 17 17"
18 1/2 36 23" 45
64
5 1/2" 10 11 1/2" 22 17 1/2" 34 23 1/2" 46
7 13 3 13 25 3 19 37
6"1 3
8
11 1 812" 231
8
18" 35 24" 47 13
8
6 1/2" 12 12 1/2" 24 18 1/2" 36 - -
1 7" 13 13" 25 119" 37 - -
2 2
0 Deflection
2000P-CO 2015P-CO
15 Deflection 30 Deflection
2030P-CO 0 Deflection
2000P-CO 15 Deflection 30
2015P-CO Deflection
2030P-CO
9 Pencil Proof Pencil Proof
15 Pencil Proof
32 30
Notes: (check if provided) 15 30
7 64
1. Available 32
Finishes 15
2. Available Accessories
17
3. Available Options 4. Construction Details
64
Standard Finish: Widths available in 1/2" increments
01 White.
13
8
13
8 13
8
from 1 1/2" to 24" for Series 3
1 2000-CO.
Optional Finish (extra charge): 8
Length available in single pieces
02 Satin Silver. 1 1 up to 72".
03 Black. 2 2 Longer sections are available only
2000
04 Clear Anodized
0 Deflection 15 Deflection 30 Deflection 0 Deflection 15 Deflection
as separate30 Deflection
non-connected
Pencil Proof Pencil Proof Pencil
sections. For lengths Proof
less than
72", round up to the next listed size.
Revision: B
Standard Finish: Date: 11/2013 Dimensions are in Widths
Inches Page:
available 1 of 1
in 1/2" increments
01 White.
Metal Industries, Inc. Clearwater, FL (727) 441 - 2651 Fax (800) 865 8383 www.metalaire.com
from 1 1/2" to 24" for Series 2000-CO.
[email protected]
Optional Finish (extra charge): Length available in single pieces
02 Satin Silver. up to 72".
03 Black. Longer sections are available only
04 Clear Anodized
as separate non-connected
sections. For lengths less than
72", round up to the next listed size.

Submittal: 2100
Linear Bar Grilles / Registers - 1/2" Border
Extruded Aluminum - 7/32" Bars - 1/2" Center
Models: 2100 2115 2130 Wall Mounting - 0/15/30 Deflection
2100H 2115H 2130H Concealed Mounting Hanger - 0/15/30 Deflection
2100HP 2115HP 2130HP Concealed Spline Subframe - 0/15/30 Deflection
Models: 2100, 2115, 2130 ( Wall Mounting ) Side View

Duct Size = Listed Width Snap-In Duct Length = Listed Length
Listed Width - 41 Friction Spring Listed Length - 41
11
116 Alignment Spline (Typ.)
For Continuous Runs
1 1
2 Typ.
2
Flat Border (Typ.) Listed Length - 21
Listed Width - 21
Listed Length + 21
Listed Width + 21
Models: 2100H, 2115H, 2130H ( Concealed Mounting Hanger )

Duct Size = Listed Width
Listed Width - 41
Side View
LINEAR DIFFUSERS

534
Listed Length - 41
AND GRILLES
438
278
11
116
1
1 Typ.
2 4
Flat Border Listed Length - 21
Listed Width - 21 Listed Length + 21
Listed Width + 21
Models: 2100HP, 2115HP, 2130HP ( Concealed Spline Subframe )

9
Listed Width + 16

Listed Width - 41
Side View
LINEAR BAR GRILLES
11
Listed Length + 16
534
Listed Length - 41
438
278
11 2
116
1 3
4
1 1 Listed Length - 21
2 4 Typ.
Alignment Spline (Typ.) Listed Length + 21
Listed Width - 21
11
For Continuous Runs Listed length + 15
516 16
615
16
Note: For Air Deflection Patterns and Face View see Page 3

2000
Submittal: 2100
Extruded
Linear BarAluminum - 7/32" Bars
Grilles / Registers - 1/2"
- 1/2" Center
Border
Extruded
Models: Aluminum
2100HW 2115HW- 7/32" Bars -Narrow
2130HW 1/2" Center
Subframe - 0/15/30 Deflection
Models: 2100HC
2100HW 2115HC
2115HW 2130NC
2130HW Combination Subframe
Narrow Subframe - 0/15/30
- 0/15/30 Deflection
Deflection
2100HC 2115HC 2130NC Combination Subframe - 0/15/30 Deflection
Models: 2100 HW, 2115 HW, 2130 HW ( Narrow Subframe )

Models: 2100 HW, 2115
9 HW, 2130 HW ( Narrow Subframe )
Duct=Listed Width + 16
9
Duct=Listed Width1 + 16
Listed Width - 4 Side View
Duct Length = Listed Length + 9
16
Duct Length
Listed= Length - 41
Listed Length + 9
16
Listed Length - 41
5 34
3
4 5 34
2 4
4
2 34
1
1
1 2
1 1 1
2 Listed Length - 2
2
1 1
1 Listed Length - 2
Listed Width2- 2
Listed Width 111
Listed Width + -162
11
Listed Width + 16
Models: 2100 HC, 2115 HC, 2130 HC ( Combination Subframe )

Models: 2100 HC, 2115
9 HC, 2130 HC ( Combination Subframe )
LINEAR DIFFUSERS
Duct=Listed Width + 16 Side View
9
Duct=Listed Width
Listed Width - 41+ 16 Side View 9
AND GRILLES
Listed Width - 41 9
Duct Length
Listed= Length
Listed Length
- 41 + 16
Listed Length - 41
5 34
4 5 34
2 34
2 3
4
4 Submittal:
1
2
1
2200
1
2 Listed Length - 41
Linear Bar Grilles - Removable Core
1 - 1/2" Centers 1
Listed Length -11
Extruded Aluminum - Non 1 Flanged Floor Mounting
4
Listed length + 16
11
Listed length + 16
2
Models: 2200 F 0 Deflection
1 - 7/32" Bars - Floor Frame
2215 F Listed Width
15 2- 1
Deflection - 7/32" Bars - Floor Frame
2
2230 F Listed Width - 111
30 Deflection - 7/32" Bars - Floor Frame
Listed Width + 216
2200 FP 0 Deflection
11- 17/64 Bars - Floor Frame - Pencil Proof
Listed Width + 16
LINEAR BAR GRILLES

2215 FP 15 Deflection - 17/64 Bars - Floor Frame - Pencil Proof
2230 FP 30 Deflection - 17/64 Bars - Floor Frame - Pencil Proof
Models: 2200 F, 2215 F, 2230 F, 2200 FP, 2215 FP, 2230 FP - Non Flanged Floor Mounting
Face View (all models) Side View (all models)
3
2 32
Overall Width = Listed Listed

Listed Width Width Width
1 7
- 16 3
- 16
Revision: B Date: 11/2013 Dimensions are - 4 in Inches Page: 2 of 3
Revision: B Date:
Metal 11/2013
Industries, Inc. Clearwater, FL (727) 441 - 2651 Fax (800) 865 8383 Dimensions are
www.metalaire.com in Inches Page:
[email protected] 2 of 3
3 11
16 1 17
32
32
Overall Length = Listed length
Listed Length - 7
16 Model: F
Removable Core (Typ.) 9 15
32 30
7
32
2000
13
8
1
Listed Length - 34 2
0 Deflection 15 Deflection 30 Deflection
Suggested Installation Model: FP

15
15 30
17 64
64
Finished Floor
Sill or Curb 3
18
Duct By
1
Others 2
0 Deflection 15 Deflection 30 Deflection

2. Available Accessories 3. Available Options 4. Construction Details LDG135
Standard Finish: Widths available in 1/2" increments from
01 White. 1 1/2" to 8 for Series 2200F.
Submittal: 2300
Linear Bar Grilles / Registers - 1" Border
Models: 2300 2315 2330 Wall Mounting - 0/15/30 Deflection
2300H 2315H 2330H Concealed Mounting Hangers - 0/15/30 Deflection
2300HP 2315HP 2330HP Concealed Spline Mounting Frame - 0/15/30 Deflection
Models: 2300, 2315, 2330 (Wall Mounting - 0 / 15 / 30 Deflection) Side View

Duct =Listed Width Duct Length = Listed Length
Snap-In Friction Spring
1
Listed Width - 4 Listed Length - 41
For Continuous Runs
1 3
12 Beveled 16
Border (Typ.) (Typ.)
1 (Typ.)
1
Listed Width - 2 1
1 Listed Length - 2 1
1
Listed Width + 1 2
Listed Length + 1 21
Models: 2300H, 2315H, 2330H (Concealed Mounting Hangers - 0 / 15 / 30 Deflection)
Duct =Listed Width

Listed Width - 41
Side View
Listed Length - 41
5 34
LINEAR DIFFUSERS
3 (Typ.)
Alignment Spline (Typ.) 16
3 9
AND GRILLES
16 For Continuous Runs

Beveled
1 41 Border (Typ.) 1
1
Listed Length - 2 1
1
Listed Length + 1 2
1 (Typ.)
1
Listed Width - 2
1
Listed Width + 1 2
Models: 2300HP, 2315HP, 2330HP (Concealed Spline Mounting Frame - 0 / 15 / 30 Deflection)

9
Duct =Listed Width + 16
Listed Width - 41
Side View
Submittal: 2300/2400 CO
9
Submittal: 2300/2400
Submittal: CO Listed Length - 41
2300/2400 CO
LINEAR BAR GRILLES
53
4 Linear Bar Grilles - Core Only
Extruded Aluminum - 1/8" Bars - 1/4" Center 3 (Typ.)
Linear Bar Grilles - Core Only 16
Extruded LinearModels:
Bar Grilles - 1/4"
2300/2400Core
CO Only
0Spline
Deflection
3 5 Aluminum - 1/8" Bars - Alignment Center (Typ.)
16 Extruded Aluminum - 1/8"
2315/2415 CO 15Bars - 1/4" Center
Deflection For Continuous Runs
Models: 2300/2400 CO 2330/2430 CO 30 Deflection
0 Deflection 1
1 0 Deflection
Models: 2300/2400 CO Beveled 1 Listed Length - 2 1
2315/2415
14 CO 15 Deflection
2315/2415 CO Border (Typ.)
15 Deflection 71
Listed Length +11162
2330/2430 CO 30 Deflection
2330/2430 CO 30 Deflection 1 (Typ.)
8 11
1 Face View (all models)
Listed Width - 2 A 7
1 16 7
1 1 16
Listed Width + 1 2
1
18 1 81
A A Width*
Models
B Available B
Grilles Registers Deflection
2300 2300 H 2300 HP 2300 DA 2300 HDA 2300 HPDA 0 A 1
Width* Width*
2315 2315 H 2315 HP 2315 DA 2315 HDA 2315 HPDA 15 4 Typ. 3
16
B
2330 B HP 2330 DA 2330 HDA
2330 H 2330 2330
Face HPDA(All
View 30
Models)
B B Face Section A-A
Screw Mount - AllShown
Option Models
2000
Revision: B Date: 11/2013 Overall Length A Dimensions

1 are in Inches Page: 1 of 23
A = Specified Length 1 4 Typ. 3
Metal Industries, Inc. Clearwater, FL (727) 441 - 2651
4 Typ.
Fax (800) 865 8383 3
www.metalaire.com
16 [email protected]
Face View (All Models) 16 Section A-A - All Models

Face View (All Models) Section A-A - All Models
Section B-B - All Models
Overall Length = Specified Length 1
15 30
8
Overall Length = Specified Length 1
8
Models Available
Grilles Registeres Deflection 13
8 Typ.
2300 / 2400 2300 0
1 1
2315 Section
/ 2415 B-B
2315 - All Models
15 4 15
4
1 30
1 4
Section B-B - All
2330 Models
/ 2430 2330 30
1 0
8 15 Deflection
1 Deflection 15 30Deflection
30
1 8 8
Models Available * Available
8 Overall Width (Inches)
LDG136 1 1 1/2 2Registeres
2 1/2 3 3 1/2 4Metal
1/2 Industries,
5 5 1/2 Inc.
4Deflection 6 6For1/2 7 7 1/2 8 8 1/2 9 9 1/2 10 10 1/2 11 11 1/2 12 1 3 Typ.
complete product specifications and submittal data, visit us at www.metalaire.com
Models Available

Grilles 8
2300 / 2400 2300 0 Number of Bars 3
Models: 2300F, 2315F and 2330F ( Standard Spring Clip Mount )
Linear Bar GrillesEnd View Side View
Extruded Aluminum - 1/8" 1Bars on 1/4" Spacing 1
Listed Length + 1 2
Listed Width + 1 2 1
Model: 2300 F Floor / Sill / Sidewall Linear Bar Grille 1/8" on11/4" spacing 0 Deflection
Listed Width - 2
2315 F Floor / Sill / Sidewall Linear Bar Grille 1/8" on 1/4" spacing 15 Deflection
1 (Typ.) Removeable Core (Typical)
2330 F Floor / Sill / Sidewall Linear Bar Grille 1/8" on 1/4" spacing 30 Deflection
1
12 Beveled 3
Border (Typ.) 16
(Typ.)
Models: 2300F, 2315F and 2330F
1 Alignment
( Standard Spring Spline) (Typ.)
Clip Mount
Listed Width - 4 Core Friction
End View For Continuous Runs 1 1/16 Side
X 1/8View
Reinforcement Bars
Duct =Listed Width 1 Retainer Spring
1
Snap-In Friction Spring Listed Length + 1 2
on Approximately 9" Centers
Listed Length - 2
1
Listed Width - 2
1 (Typ.) Duct Length

Removeable = Listed
Core Length
(Typical)
Models: 2300
1 1 F/H ( Concealed Mounting ) Beveled 3
2 16
End View Border (Typ.) (Typ.)
1 1 Alignment Spline (Typ.)
ListedWidth
Listed Width +- 4
12 Core Friction
For Continuous Runs 1 1/16 X 1/8 Reinforcement Bars
Duct =Listed Width
1
Retainer Spring
Listed Width - 2 Snap-In Friction Spring on Approximately 9" Centers
1 (Typ.) Listed Length - 41
3
4 Min. Beveled
Models: 2300 F/H ( Concealed Mounting ) Border (Typ.)
End View Alignment Spline (Typ.)
4
1
Listed Width + 1 2 For Continuous Runs
5 34 1
Listed Width - 2
1 (Typ.)
* Available Overall Width (Inches)
LINEAR DIFFUSERS
3
4 Min. Beveled 1 1/2 2 2 1/2 3 3 1/2 4 4 1/2 5 5 1/2 6 6 1/2 7 7 1/2 8 8 1/2 9 9 1/2 10 10 1/2 11 11 1/2 12
AND GRILLES
Border (Typ.) Number of Bars
4 Alignment Spline (Typ.)
5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47
For Continuous Runs
5 34 Listed Width - 41
Duct =Listed Width
* Available
Options: 0, 15 Overall Width (Inches)
or 30 Deflection
1 1/2 2 2 1/2 3 3 1/2 4 4 1/2 5 5 1/2 6 6 1/2 7 7 1/2 8 8 1/2 9 9 1/2 10 10 1/2 11 11 1/2 12
15 30
Number
8
1 of Bars
1
5 7 9 11 13 15 8 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47
Listed Width - 41 13
8
Duct =Listed Width
1
Options: 0, 15 or 30 Deflection
4
1
0 Deflection
1
8 1515Deflection 30
30 Deflection
8
13
Notes: (check if provided) 8
LINEAR BAR GRILLES

1
1. Available Finishes 2. Available Accessories
*Available Overall3.Width
Available
(Inches)
4 Options 4. Construction Details
0 Deflection
Dampers: 15 Deflection 30 Deflection
Standard Finish:
1 1 1/2 2 2 1/2 3 3 1/2 L94 - Equalizing
4 1/2 5 Grid
5 1/2Mitered
6 6 1/2 7 7 1/2 8 8 1/2 9 9 1/2 10 10 Widths
1/2 11available
11 1/2 in121/2"
01 White Corner Widths 3-1/2" and smaller use increments from 1-1/2" to 12".
Optional Finish (extra charge): DA - Aluminum Damper a single flap style damper. Lengths available in single pieces
1. Satin
02 Available
Silver Finishes 2. Available Accessories Widths
3. Available 4" and smaller use 4. Construction
Options up to 72".Details
Number of Bars Model DA damper. Core only.
Standard Finish: L9 - Equalizing Grid Mitered Dampers: Widths available
Longerinsections
1/2" are made by
03 Black
3 White
01 5 7 9 11 13 15 Corner
17 19 21 23 FSM
25 Widths
27 - Face
29
3-1/2" 31Screw
and 33 Mount
smaller use35 37 increments 41from 1-1/2"
39 joining 43 to
4512".
sections in 47
the field with
04 Clear Anodized DA - Aluminum Damper a single flap style damper. Lengths available in single pieces
Optional Finish (extra charge): factory supplied alignment strip.
24 Mill
02 Satin Silver
Widths 4" and smaller use up to 72".
Model DA damper. Core only. Standard mounting in concealed
28 Special
03 BlackColor Setup Charge Longer sections are made by
friction spring clips.
FSM - Face Screw Mount joining sections in the field with
04 Clear Anodized Available reverse sizes (face
factory supplied alignment strip.
24 Mill
Standard bars
mountingparallel to the short side).
in concealed
28 Special Color Setup Charge friction spring clips.
Available reverse sizes (face
Revision: A Date: 11/2013 Dimensions bars areparallel
in Inches
to the short Page:
side). 3 of 3
2000

Models: 2400, 2415, 2430 Wall Mounting - 0/15/30 Deflection
2400H, 2415H, 2430H Concealed Mounting Hangers - 0/15/30 Deflection
2400HP, 2415HP, 2430HP Concealed Spline Mounting Frame - 0/15/30 Deflection
2400HW, 2415HW, 2430HW Narrow Mounting Frame - 0/15/30 Deflection
Models: 2400, 2415, 2430 (Wall Mounting - 0 / 15 / 30 Deflection) Side View

Duct Size = Listed Width Snap-In Duct Length = Listed Length
Listed Width - 41 Friction Spring Listed Length - 41
11
116
For Continuous Runs
1 1
4
2
Flat Border (Typ.) Listed Length - 21
Listed Width - 21
Listed Length + 21
Listed Width + 21
Models: 2400H, 2415H, 2430H (Concealed Mounting Hangers - 0 / 15 / 30 Deflection)

Listed Width - 14
Side View

Listed Length - 41
534
LINEAR DIFFUSERS
438
AND GRILLES
278
11
Listed Length + 21
1 1
2 4
Flat Border
Listed Width - 21
Listed Width + 21
Models: 2400HP, 2415HP, 2430HP (Concealed Spline Mounting Frame - 0 / 15 / 30 Deflection)
9
Listed Width + 16
11
Listed Length + 16
Listed Length - 41
LINEAR BAR GRILLES
534
438 2
3
278 4
11
116
1 1 Listed Length + 21
2 4
Listed Width - 21 Listed length + 15
Alignment Spline (Typ.) 16
11
Models: 2400 HW, 2415 HW, 2430 HW (Narrow Mounting Frame - 0 / 15 / 30 Deflection)
9
Listed Width + 16
Duct Size = Listed Width Side View
Listed Width - 14
11
Listed Length + 16
Listed Length - 41
2000
534 2
438
278
11
1 Listed Length + 21
1 1
2 4
Listed Width - 21 Alignment Spline (Typ.)
11

Models: 2500 2515 2530
Submittal: 2500
Wall Mounting - 0/15/30 Deflection
2500H 2515H 2530H Concealed Mounting Hangers - 0/15/30 Deflection
Bar Grilles
g/Sidewall Mounting/Aluminum Construction Submittal:
Submittal:
2500 2500
2500HP 2515HP 2530HP Concealed Spline Mounting Frame With Hangers - 0/15/30 Deflectio
Submittal: 2500
near2500
Bar
Linear 2515
Bar Grilles2530
Grilles Submittal:
Wall Mounting - 0/15/30 Deflection 2500
Linear2515H
2500H
eiling/Sidewall Bar
Ceiling/SidewallGrilles 2530H
Mounting/Aluminum
Mounting/Aluminum Concealed
Construction Mounting Hangers - 0/15/30 Deflection
Construction
inear Ceiling/Sidewall
Bar
2500HP Grilles
2515HP Mounting/Aluminum
2530HP Concealed Construction
Spline Mounting FrameDeflection
With Hangers - 0/15/30 Deflection
dels: 2500
Models: 25002515 2515
2530 Wall Mounting
2530 Wall - Mounting
0/15/30
- 0/15/30
Deflection
eiling/Sidewall
Models:
2500H Mounting/Aluminum
2500
Models:2500H
2515H
2500, 2515
2515H
2515, 2530 2530H
(Wall 2530
Mounting2530H
Construction
- Concealed Wall Mounting
Concealed
Mounting
0 / 15 / 30 Deflection) - 0/15/30
Hangers
Mounting Deflection
- 0/15/30
Hangers - 0/15/30
Face View (all models)
odels: 2500HP
2500 2500H
2500HP
2515HP 2515H
2515 Duct2515HP
2530HP
2530
=Listed Width 2530H
2530HP
Concealed
Wall Concealed
Concealed
Spline
Mounting
Snap-In Friction
Mounting
Mounting
Spline
- 0/15/30
Spring
Hangers
Frame
Mounting - 0/15/30
WithFrame
Deflection Hangers Deflection
With- 0/15/30
Hangers Side View
- 0/15/30
2500H 2500HP
2515H 2515HP
Listed
2530H
1
Width - 4 2530HP
Concealed Concealed
Mounting
Alignment Spline
Spline Mounting Frame With Hangers
(Typ.) Hangers - 0/15/30 Deflection
- 0/15/30 1
Listed Length - 4
Deflection
2500HP 2515HP
1
2530HP Concealed Spline Mounting Frame With Hangers - 0/15/30 Deflection
For Continuous Runs
12 Beveled 3
els: 2500, 2515, 2530 (Wall Mounting - 0 / 15 / 30 Deflection) Border (Typ.) 16
Side View (Typ
Duct =Listed Width 1 (Typ.)
Snap-In Friction Spring Face View
Duct (all models)
Length Face View Length
= Listed (all models)
Models: 2500, 2515,
Models:
2530
Listed 2500,
Width 1 2515,
(Wall
-4 Mounting
2530 - (Wall
0 / 15
Listed Mounting
/ 30
Width -21Deflection)
- 0 / 15 / 30 Deflection)
Alignment Spline (Typ.) ListedFace
Side View View
Length
Side- 41View
(all models) 1
1 -10 / 15
Models: 2500, 2515,
Duct =Listed 2530
Width Duct (WallWidth
=Listed Mounting
Width + Friction / 30 Deflection) 1 Listed Length - 2 1
Listed Snap-In Spring
Snap-In
For Continuous Friction Spring
1 Listed Width - 4 Duct 1
Listed Width Width
-4 1 2 Runs Duct Length = Listed Length
Duct
Length
Side= View
Listed Length
1Models: =Listed Snap-In
(Typ.) Friction
SplineSpring - 41 Listed - 41Length 1
2 2500, 2515, 2530 (Wall Mounting - 0 /Alignment
Beveled SplineAlignment
151 / 30 Deflection) (Typ.) Listed Length Duct LengthLength
= Listed Listed Length + 1 2 3
Listed WidthFor - 4Continuous Runs
1 Models:
Duct2500H,
=Listed
1 2515H,
Width Border
2530H (Typ.) For
(Concealed
Continuous
Alignment
Mounting SplineRuns
Hangers (Typ.)
Side View Listed Length - 41 16
12 12 Snap-In
Beveled Friction Spring
Beveled Duct Length = Listed Length (Typ.)
Listed1 Width - 41 1 (Typ.) For Continuous Runs 3 3
Border
Alignment(Typ.)Spline
Border
(Typ.)(Typ.) Listed Length - 41 16 16
12
1 Duct =Listed Width Beveled (Typ.) 3
(Typ.)
Listed Width - 2 For Continuous1Border
1 (Typ.) Runs
(Typ.) (Typ.) 16
1 Listed Width - 41 1
+ 1- 211 Listed Width -Beveled
12 1 1 Listed Length - 2 13 (Typ.)
ListedListed
Width Width 1 (Typ.)
2 2
Border 1 Listed Length - 1 Side View 16
1Listed Width 1 1 (Typ.) 1 1 Listed Length - 2 1 12 (Typ.) 1
Listed Width + 1 Listed Width -+2 1 Listed Length + 1 2
2 1 (Typ.)2 Duct Length1 = Listed Length
1 1 Listed Length + 1 1Listed Listed Length -12 1
els: 2500H, 2515H, 2530H (Concealed 1 Listed Width Hangers
Mounting +1 2 - 0 / 15 / 30 Deflection) Length + 1 2
Listed Width - 2 2 Listed
1 Length - 41
Models: 2500H, 2515H,
Models: 2530H
2500H,(Concealed
2515H, 12530H Mounting
(ConcealedHangersMounting
- 0 / 15Hangers
/ 30 Deflection)
- 0 / 15 / 30 Deflection) Listed Length - 2 1
Listed Length + 1
Duct =Listed Width 22530H (Concealed Mounting Hangers - 0 / 15 / 30 Deflection)
Models: 2500H,Width
2515H,
LINEAR DIFFUSERS
Duct =Listed Duct =Listed Width 1
3 Width - 1
Listed Listed Length + 1 2 3
5 4 Listed Width
4
- 41 Duct
Listed - 41
Width Width
=Listed 16 (T
Models: 2500H, 2515H, 2530H (Concealed Mounting Hangers - 0 / 15 / 30 Deflection) Side View
AND GRILLES
9 Listed Width - 41
Alignment Spline (Typ.) Side View Side View
3
16 =Listed Width
Duct For Continuous Runs Duct Length = Listed Length
Duct Length = Listed
Duct
Length
Length
Side = Listed
View Length
Listed Width - 41 1
1 Beveled Listed
Listed Length - 41Length
1Duct Listed- Length
Length 4= Listed Listed Length - 1
- 41Length
2 1
14 Border (Typ.) Side View
Listed Length - 41 1
Duct Length = Listed Length Listed Length + 1 2
53 53 1 (Typ.)
3 (Typ.) 3 (Typ.)
3 (Typ.)
4 4 Listed Length - 41 16 16 16
3 9 53
43 9
Alignment
Alignment
Listed Width -Spline1SplineAlignment
(Typ.)
(Typ.) Spline (Typ.) 3
16 (Typ.)
3 9 16 16 For Continuous 2 Runs
For Continuous Runs
16 9 For Continuous 1 Alignment
Runs Spline (Typ.)
53 3 Listed Width + 1 2 3
4 16 Beveled For Continuous Runs
Beveled 1
1
1 Listed Length - 2 Listed Length -21 16 (Typ.)
11 1 41 1 1 1
Beveled Listed Length - 2
1 / 15 / 30 Deflection)
1 41 3 9 4 Models: 2500HP,
1 2515HP, Alignment
Border
2530HP
Border (Typ.)
SplineBorder
(Typ.)
(Concealed (Typ.) (Typ.) Mounting Frame With Hangers - 0
Spline
Beveled 1 Listed LengthListed
+ 1 1
Length
Listed
1
-2
Length + 1 1
1
1
16 14 For Continuous Runs Border (Typ.) 2
Listed Length + 1 2 1 Side2 View
1 (Typ.) 1 (Typ.) 1
1 Duct =Listed Beveled
Width
1
9
+ 16 1 Listed Length - 1 Listed
DuctLength + 1=2
Length Listed Length + 9
1 41 Listed Width - 2 Listed1Width
(Typ.)-2
Border (Typ.) 1 (Typ.)
2 1
1
16
1 Listed Width 1 1 Listed Length - 4
Listed Listed - 2 + 1 1 Listed
WidthWidth Width +- 11 -2
1 Listed Length + 1 2
2 2 4
Listed Width + 1 2 1 1 (Typ.)1
Models: 2500HP,Models:
2515HP, 2500HP,
2530HP Listed Width +(Concealed
1Mounting
Listed Width2515HP,
(Concealed
-1 2530HP
2
Spline 2 Spline
Frame Mounting
With Hangers
Frame
- 0With
/ 15Hangers
/ 30 Deflection)
Side View Side View 3
Models:
els: 2500HP, 2515HP, 2500HP,
2530HP 2515HP,
1
(Concealed 2530HP
Spline (Concealed
Mounting Spline Mounting
Frame Frame-With
With Hangers Hangers
0 / 15 / 30-Deflection)
0 / 15 / 30 Deflection) 16
Listed Width +1
9 9
+ 162=Listed Width + 16
Duct =Listed Width Duct Duct Length = Listed
Duct
Length + 9= Listed
Length
Side View Length +
9
Side View 16 16
LINEAR BAR GRILLES

3 Listed Width
Models: 2500HP,52515HP, 2530HP -941Duct
Listed
(ConcealedWidth
=Listed - 41 + 9Mounting Frame With Hangers - 0 / 15 / 30 Deflection)
Spline
Width Listed Length - 1Length
Duct Listed= Length - 419
Listed+Length + 9
Duct =Listed
4 Width + 16 16 Duct Length =4Listed Length 16
Side View 161
Listed Width - 41 Listed Length
1 -4 1
Listed Length - 2
Listed Width
Duct - 41 Width + 9
=Listed
1 Length
Listed
Duct Length = Listed Length + -94
16 3 (Typ.) 3 (Typ.)
1
16 1
Listed Length + 1 1
16 16
Listed
5 Width - 41 Alignment Spline (Typ.) Listed Length - 4 3 (Typ.)
3 2
16 3 16
53
4 53
4
For Continuous Runs 15 16
(Typ.)
3 (Typ.) 30
1 1
53
4 1 Beveled 1 1 Listed Length - 2 Listed Length - 2 1 16 1
14 11
(Typ.)Border (Typ.) 1Listed Length + 1 1Listed
Listed Length
Length + -122 1
533
5 3 5 Alignment SplineAlignment Spline (Typ.) 2 13
416 16 Listed Length - 1 1 8
For Continuous Runs
For Continuous
Alignment Runs
Spline (Typ.) 1 1Listed Length
2 +12 1
3 5 1 (Typ.) 1 15
Listed Length - 2 15 30 1 30
16 1
Beveled 1 For Continuous Runs
Beveled Listed Length1 +21 2 15
1
3 5 11 1
14 Alignment
Listed Width -Spline
Alignment
(Typ.)
2 SplineBorder
(Typ.)(Typ.) Listed Length + 1 2 30
16 3 5 4 Border (Typ.) Beveled
16 1
14 For Continuous 1 Runs
For Continuous Runs 0 Deflection
15 138 13
15 Deflection
8 30 Deflection
Border 30
Listed Width +12 1 (Typ.) (Typ.)
15 30
1 (Typ.) 3
1 1 1
Beveled
Beveled
1 1 1
Cores = 1/8" Bars1 8on 1/2" Centers
14 14 Listed Width - 2 Listed Width - 2
(Typ.) 1 (Typ.)
2 2
Border (Typ.)
11
1 Listed Width - 2
Border
0 Deflection 0 Deflection
15 Deflection
1
2 13
15 Deflection 13
30 Deflection
8 8
30 Deflection
Listed Width + 1 2 Listed Width + 1 2
1 (Typ.)
1 (Typ.) Cores0 Deflection
= 1/8" Bars
Cores
on 1/2" 15
= 1/8" Deflection
Centers
Bars 30 Deflection
on 1/2" Centers
1. Available Finishes 1
Listed-Width 2. Available Accessories
1 Listed Width + 1 1
-2 3. Available Options 4. Construction Details
1
Notes: Notes:
(check if provided)
(check if provided)
1
Listed Width 2 Cores = 1/8" Bars on 1/2" Centers
2
2
2 0 Deflection 15 Deflection 30 Deflection
Standard Finish: L9 - Equalizing Grid Mitered 0 Dampers:
Deflection 15 Deflection 30 Widths available in 1/2"
Deflection
1. AvailableNotes:
Available(check if 2.
provided)
Listed Width + 1 1
Listed Width + 1 1
1.Finishes Finishes Available2.Accessories
2
3. Available3.Options
AvailableCores Options 4.onConstruction4. Construction
Details Details
01 White2 Corner = 1/8" Bars 1/2" Centers
Widths
Cores 3-1/2" andon
= 1/8" Bars smaller use
1/2" Centers increments from 1-1/2" to 12
Notes: Finish:
Standard (check
1.
Standard if
Available provided)
Finish:Finishes L9 - Equalizing 2. Available
L9GridDA - Accessories
- Equalizing
Mitered Dampers:
Grid
Aluminum Mitered
Damper 3. Available Options
Dampers: a single Widths
flap style 4.Widths
available
damper. Construction
in 1/2"
available inDetails
1/2" available in single p
2000
: 01 (check if01provided)
Optional Finish (extra charge): Lengths
White Standard Finish:
White Corner L9 - Equalizing Widths 3-1/2"
Corner Grid Mitered Widths
and smaller
Dampers: 3-1/2" use
Widthsand smaller
4" and increments
use
smaller from
use increments
1-1/2"
Widths to from
12".
available 1-1/2"
in 1/2" to 12".
1. Available Finishes04 Clear Anodized 2. Available Accessories 3. Available Options 4. Construction Details up to 72".
ailable
Optional Finishes
Finish 01 charge):
Optional
(extra White
Finish (extra 2. DA - Aluminum
Available
charge): DADamper
- Aluminum
Accessories Corner Damper
3. a single flap
Available style
a single
Widths
Options damper.
flapand
3-1/2" style damper.
smaller use4.
Lengths increments
Construction
available
Lengthsin single from 1-1/2"
Details
available
pieces in single to 12".
pieces
L9 - Equalizing Dampers: Model DA damper. Core only.
DAGrid Mitered Damper
Standard Finish:
04 Clear 02 Satin
Optional
Anodized
04 Silver
Finish
Clear (extra
Anodized charge): - Aluminum Widths 4" andWidths
smaller 4"use
a single and
flapsmaller upWidths
use
style damper. to 72".available
up toin72".
Lengths
1/2" Longer sections are made b
available in single pieces
ard Finish:
01 White L9 - Equalizing
Corner Grid Mitered Dampers:
Widths
Model3-1/2" and
DA damper.
Model
Widths
FSM
smaller
4"Core
DA - Face use
use
anddamper.
only. Screw
smaller Core
Mount
Widths
increments
only. from available
1-1/2" toin 1/2" sections in the field w
12".
joining
03 Black
04 Satin
ClearSilver
Anodized Longer sections upare
Longerto 72".
made
sectionsby are made by
02 Satin Silver 02 DA - Aluminum Damper a single
Widths flap style damper. increments
available infrom 1-1/2" tosupplied
12".
1 Optional
White Finish (extra charge): Corner FSM - Face3-1/2"
Screw and
FSMModel
-Mount
Facesmaller
DAScrew use
damper.Mount Lengths
Core only.
joining sections joining
single
in thesections
Longer field with
sections
pieces
factor
inarethemade
field with
by
alignment str
0304Black
Clear
28
03
Anodized
Custom
02 Black
Satin SilverColor Setup
DACharge
- Aluminum Damper Widths 4" and
a single smaller
flap
FSM - style
Face usedamper.
Screw Mount up to 72".
Lengths available in single pieces
al Finish (extra charge): factor supplied factor
alignment
joining supplied
sectionsstrip.
alignment
Standard
in the fieldstrip.
mounting
with in conce
2802Custom Color03Setup
28 BlackCharge
Custom Color Setup Charge Model 4"
Widths DAanddamper.
smaller Coreuseonly. Longerup sections aresupplied
made byalignment strip.
4 Clear Satin Silver
Anodized Standard to Standard
72".
factor
mounting in concealedfriction
mounting in spring
concealed clips.
28 Custom Color Setup Charge FSM - Face Screw Mount joining sections in the field with
Model DA damper. Core only.friction spring friction
clips. spring clips.
factor Longer sections are made byreverse sizes (face
03 Black Standard mounting
Available in concealed
2 Satin Silver supplied alignment strip.
28 Custom Color Setup Charge FSM - Face Screw Mount Availablejoining
reversefriction
sections
Available
sizesspring
reverse
(face clips.
in bars
the field
sizes with to the short side
(face
parallel
3 Black Standard
bars parallelmounting
tobars in concealed
the parallel
short side).
to thesizes
short side).
frictionfactor
springsupplied alignment strip.
Available reverse (face
8 Custom Color Setup Charge clips.
bars parallel to the short side).
Standard
Available reversemounting
sizes (facein concealed
Revision: Revision:
Revision: Date: 11/2013 Date:
Date: 11/2013
11/2013 Dimensions
barsare
DimensionsDimensions
are in Inches friction
parallel to
in Page: theare
spring
Inches shortin ofInches
clips.
1side).
Page:
1 1 ofPage:
1 1o
Revision:Metal Industries, Inc.Date:
Metal
Metal 11/2013
Industries,
Clearwater,
Industries,FL Inc. 441
Inc. (727) Clearwater,
Clearwater,
- 2651 FLFax
FL (727) (727)
441(800) 441
- 2651 - 2651
865 8383
Fax (800) Fax8383
(800) 865
www.metalaire.com
865 Dimensions
8383 Available
are
www.metalaire.com
www.metalaire.com
[email protected]
reverse
in Inches sizes (face1 of 1
Page:
[email protected]
[email protected]
bars parallel to the short side).
Revision: Date: 11/2013
Metal Industries, Inc. Clearwater, FL (727) 441 - 2651 Dimensions
Fax (800) 865 8383 are in Inches
www.metalaire.com Page: 1 of 1
[email protected]

LDG139
on: Date: 11/2013 Dimensions are in Inches Page: 1 of 1
LINEAR BAR GRILLE Performance Specification
ALUMINUM MODELS The manufacturer shall provide published performance
2000/2100/2200F/2300/2400/2500 data. Data shall be tested in accordance to ANSI/
Air outlets shall be 2000 series extruded aluminum linear ASHRAE Standard 70-2006.
bar grilles manufactured by METALAIRE. The units shall
be constructed from heavy walled extruded aluminum. Paint Specification
Units specifically designed for sidewall or ceiling
applications (Models 2000/2100/2300/2400/2500) shall
have deflection bars of 0, 15 or 30 as detailed. Face
bars shall be 1/8" or 7/32" wide on 1/4" or 1/2" centers
and shall be permanently fixed in position. Borders
LINEAR DIFFUSERS
shall be 1" or 1/2" wide. Auxiliary sub-frames shall be

AND GRILLES
furnished as required to fit the wall or ceiling system. The

units shall be furnished with positive holding concealed
mounting systems as required. Units shall be furnished
in one piece up to 72" in length. Continuous sections
shall butt together with hairline joints and be provided
with interlocking alignment splines. Borders shall be
mechanically fastened to provide a mitered corner.
Units specifically designed for floor applications (Models
2000F/2200F/2300F) shall have deflection bars of 0, 15
or 30 as detailed. . Face bars shall be 1/8" on 1/4"
centers or 7/32" on 1/2" centers. Borders shall be 3/16"
LINEAR BAR GRILLES
or 1" wide as specified. Cores shall be removable and

shall be held in place by retaining clips. The units shall
be specially reinforced for floor or sill installation with
1/8" by 11/16" support brackets. Units shall be furnished
in one piece up to 72" in length. Continuous sections shall
butt together with hairline joints and be provided with
interlocking alignment splines (Model 2200F not available
for continuous runs). Borders shall be mechanically
fastened to provide a mitered corner.
Units specifically designed for pencil proof applications
(Models 2000FP/2200FP) shall have deflection bars of
0, 15 or 30 as detailed. Face bars shall be 17/64"
wide on 1/2" centers. Borders shall be 3/16" or 1" wide
2000
as specified. Cores shall be removable and shall be held

in place by retaining clips. The units shall be specially
reinforced for floor or sill installation with 1/8" by 11/16"
support brackets. Units shall be furnished in one piece up
to 72" in length. Continuous sections shall butt together
with hairline joints and be provided with interlocking
alignment splines (Model 2200F not available for
continuous runs). Borders shall be mechanically fastened
to provide a mitered corner.
MODEL 2000 NUMBER SPECIFICATION
MODEL 2000 (1 BORDER - 7/32 BARS - 1/2 CENTERS)
Model Mounting Length Width End Detail Available Finishes
2000 Standard 6 - 72 1 1/2 - 24 1EB One End Border 01 White
2015 H - Concealed Mtg W/ Hanger (One Piece) (1/2 Increments) 2EB Two End Borders 02 Satin Silver
2030 HP - Spline Subframe / Concealed Mtg OO Open Ends 03 Black
F - Floor Mtg 04 Clear Anodize
FP - Floor Mtg / Pencil Proof 24 Mill
28 Custom Color
DA
L9 Equalizing Grid
LINEAR DIFFUSERS
AND GRILLES
Available Options
FSM
Access Door
(Access Door not availabe on floor units)
MODEL 2000 CORE ONLY

Model Length Width Available Finishes
2000CO 6 - 72 1 1/2 - 24 01 White
2015CO (One Piece) (1/2 Increments) 02 Satin Silver
LINEAR BAR GRILLES

2030CO 03 Black
04 Clear Anodize
24 Mill
28 Custom Color

Model Mounting Width Miter Style Available Finishes
2000 MC - Standard W / Miter 1 1/2 - 24 90 Horizontal 90 Degree 01 White
2000
2015 HMC - Concealed Mtg W/ Hanger / W/ Miter (1/2 Increments) SPEC Special Miter 02 Satin Silver
2030 HPMC - Spline Subframe / Concealed Mtg / W / Miter VI Vertical Inside 03 Black
FMC - Floor Mtg w / Miter V2 Vertical Outside 04 Clear Anodize
FPMC - Floor Mtg / Pencil Proof / W / Miter 24 Mill
28 Custom Color

MODEL 2100 (1/2 BORDER - 7/32 BARS - 1/2 CENTERS)
HW - Narrow Subframe / Concealed Mtg 04 Clear Anodize
HC - Combo Subframe / Concealed Mtg 24 Mill
28 Custom Color
DA
L9 Equalizing Grid
LINEAR DIFFUSERS
AND GRILLES
Available Options
Access Door

MODEL 2100 MITER CORNER
Model Mounting Width Miter Style Air Flow
LINEAR BAR GRILLES
2100 MC - Standard W / Miter 1 1/2 - 24 90 Horizontal 90 Degree 00 0 Degree Deflection

2115 HMC - Concealed Mtg W/ Hanger / W/ Miter (1/2 Increments) SPEC Special Miter IN Air Flow In
2130 HPMC - Spline Subframe / Concealed Mtg / W / Miter VI Vertical Inside OT Air Flow Out
HWMC - Narrow Subframe / Concealed Mtg /W/ Miter V2 Vertical Outside
HCMC - Combo Subframe /Concealed Mtg/W/Miter
Available Finishes
01 White
02 Satin Silver
03 Black
04 Clear Anodize
24 Mill
2000
28 Custom Color
Model Mounting Length Width Finish Accessories
2200 F - Floor Mtg 6 - 72 1 1/2 - 8 01 White L9 Equalizing Grid
2215 FP - Floor Mtg W/Miter (One Piece) (1/2 Increments) 02 Satin Silver
2230 03 Black
04 Clear Anodize
24 Mill
28 Custom Color
LINEAR DIFFUSERS
AND GRILLES
Model Mounting Width Miter Style Air Flow Available Finishes
2200 FMC - Floor Mtg W/Miter 1 1/2 - 8 90 Horizontal 90 Degree 00 0 Degree Deflection 01 White
2215 FPM - Floor Mtg Pencil Proff W/Miter (1/2 Increments) SPEC Special Miter IN Air Flow In 02 Satin Silver
2230 OT Air Flow Out 03 Black
04 Clear Anodize
24 Mill
28 Custom Color
LINEAR BAR GRILLES

2000

F - Floor Mtg 04 Clear Anodize
24 Mill
28 Custom Color
DA
L9 Equalizing Grid
LINEAR DIFFUSERS
AND GRILLES
Available Options
FSM
Access Door
MODEL 2300 CORE ONLY

Model Length Width Available Finishes
2300CO 6 - 72 1 1/2 - 12 01 White
2315CO (One Piece) (1/2 Increments) 02 Satin Silver
LINEAR BAR GRILLES
2330CO 03 Black
04 Clear Anodize
24 Mill
28 Custom Color

FMC - Floor Mtg w / Miter V2 Vertical Outside
2000
FPMC - Floor Mtg / Pencil Proof / W / Miter
Available Finishes
01 White
02 Satin Silver
03 Black
04 Clear Anodize
24 Mill
28 Custom Color
HW - Narrow Subframe / Concealed Mtg 04 Clear Anodize
HC - Combo Subframe / Concealed Mtg 24 Mill
28 Custom Color
DA
L9 Equalizing Grid
LINEAR DIFFUSERS
AND GRILLES
Available Options
FSM
Access Door

LINEAR BAR GRILLES

HWMC - Narrow Subframe / Concealed Mtg /W/ Miter V2 Vertical Outside
HCMC - Combo Subframe /Concealed Mtg/W/Miter
Available Finishes
01 White
02 Satin Silver
03 Black
04 Clear Anodize
24 Mill
28 Custom Color
2000

04 Clear Anodize
24 Mill
28 Custom Color
DA
L9 Equalizing Grid
LINEAR DIFFUSERS
AND GRILLES
Available Options
FSM
Access Door

LINEAR BAR GRILLES
V2 Vertical Outside
Available Finishes
01 White
02 Satin Silver
03 Black
04 Clear Anodize
24 Mill
28 Custom Color
2000
MODEL 2000, 21000, 2200 (0 AND 15 DEFLECTION)
Outlet Velocity (Vk) - 500 - - 700 - - 900 - - 1000
Total Pressure (Pt) - .016 - - .031 - - .051 - - .062
Static Pressure (Ps) - .012 - - .024 - - .040 - - .050
Listed Width
(in inches) NC - - - - 15 - - 20 - - 23
Flow CFM - 31 - - 44 - - 56 - - 63
1 1/2 Throw Sill of Floor 6 - 9 9 - 13 10 - 14 11 -
Ft Side Wall 8 - 11 11 - 16 13 - 18 14 -
Flow CFM - 43 - - 60 - - 77 - - 85
2 Throw Sill of Floor 5 - 8 8 - 12 10 - 14 11 -
Ft Side Wall 7 - 10 10 - 15 13 - 18 14 -
Flow CFM - 55 - - 77 - - 99 - - 110
LINEAR DIFFUSERS
AND GRILLES
Ft Side Wall 8 - 11 11 - 16 14 - 20 16 -
Flow CFM - 65 - - 91 - - 117 - - 130
Ft Side Wall 8 - 12 13 - 18 15 - 22 17 -
Flow CFM - 76 - - 107 - - 137 - - 153
Ft Side Wall 9 - 13 13 - 19 16 - 23 18 -
Flow CFM - 110 - - 154 - - 198 - - 220
LINEAR BAR GRILLES

Ft Side Wall 10 - 14 15 - 22 17 - 25 20 -
Flow CFM - 110 - - 154 - - 198 - - 220
Ft Side Wall 10 - 15 15 - 22 19 - 27 22 -
Flow CFM - 133 - - 186 - - 239 - - 265
Ft Side Wall 10 - 15 15 - 22 19 - 27 22 -
Flow CFM - 178 - - 249 - - 320 - - 355
Ft Side Wall 12 - 17 17 - 24 20 - 28 23 -
Flow CFM - 223 - - 312 - - 401 - - 445
2000

Ft Side Wall 13 - 19 20 - 28 23 - 33 26 -
Flow CFM - 268 - - 375 - - 482 - - -
12 Throw Sill of Floor 12 - 17 22 - 31 21 - 30 - -
Ft Side Wall 15 - 21 24 - 35 27 - 38 - -

MODEL 2000, 21000, 2200 (0 AND 15 DEFLECTION)
Outlet Velocity (Vk) - - 1100 - - 1200 - - 1300
Total Pressure (Pt) - - .062 - - .090 - - .105
Static Pressure (Ps) - - .050 - - .072 - - .084
Listed Width
(in inches) NC - - 23 - - 29 - - 31
Flow CFM - - 69 - - 75 - - 81 -
1 1/2 Throw Sill of Floor 16 13 - 18 13 - 19 14 - 20
Ft Side Wall 20 15 - 22 17 - 24 17 - 25
Flow CFM - - 94 - - 102 - - 111 -
2 Throw Sill of Floor 16 13 - 18 13 - 19 14 - 20
Ft Side Wall 20 15 - 22 17 - 24 17 - 25
Flow CFM - - 121 - - 132 - - 143 -
LINEAR DIFFUSERS

AND GRILLES
Ft Side Wall 23 17 - 24 18 - 26 20 - 28
Flow CFM - - 143 - - 156 - - 169 -
Ft Side Wall 25 18 - 26 20 - 28 21 - 30
Flow CFM - - 168 - - 183 - - 198 -
Ft Side Wall 26 20 - 28 21 - 30 22 - 23
Flow CFM - - 242 - - 264 - - 286 -
LINEAR BAR GRILLES
Ft Side Wall 29 22 - 32 24 - 34 25 - 26
Flow CFM - - 242 - - 264 - - 296 -
Ft Side Wall 31 23 - 33 24 - 35 27 - 38
Flow CFM - - 292 - - 318 - - 345 -
Ft Side Wall 31 23 - 33 24 - 35 27 - 38
Flow CFM - 391 - - - - - - -
8 Throw Sill of Floor 26 19 - 27 - - - - - -
Ft Side Wall 33 24 - 34 - - - - --
Flow CFM - - - - - - - - - -
2000
10 Throw Sill of Floor 30 - - - - - - - - -

Ft Side Wall 37 - - - - - - - - -
Flow CFM - - - - - - - - - -
12 Throw Sill of Floor - - - - - - - - - -
Ft Side Wall - - - - - - - - - -
DEFINITION OF UNITS
VK Outlet Velocity
LINEAR DIFFUSERS
AND GRILLES
LINEAR BAR GRILLES
2000

MODEL 2000, 21000, 2200 (30 DEFLECTION)
Listed Width
(in inches) NC - - - - 20 - - 25 - - 28
Flow CFM 36 - - 50 - - 65 - - 70
Ft Side Wall 8 - 11 11 - 16 13 - 18 14 -
Flow CFM - 48 - - 68 - - 88 - - 97
Ft Side Wall 7 - 10 10 - 15 13 - 18 14 -
Flow CFM - 63 - - 89 - - 114 - - 125
LINEAR DIFFUSERS

AND GRILLES
Ft Side Wall 8 - 11 11 - 16 14 - 20 16 -
Flow CFM - 74 - - 105 - - 135 - - 148
Ft Side Wall 8 - 12 13 - 18 15 - 22 17 -
Flow CFM - 87 - - 123 - - 156 - - 174
Ft Side Wall 9 - 13 13 - 19 16 - 23 18 -
Flow CFM - 100 - - 141 - - 181 - - 200
LINEAR BAR GRILLES
Ft Side Wall 10 - 14 15 - 22 17 - 25 20 -
Flow CFM - 125 - - 177 - - 228 - - 251
Ft Side Wall 10 - 15 15 - 22 19 - 27 22 -
Flow CFM - 157 - - 213 - - 274 - - 302
Ft Side Wall 10 - 15 15 - 22 19 - 27 22 -
Flow CFM - 202 - - 286 - - 367 - - 405
Ft Side Wall 12 - 17 17 - 24 20 - 28 23 -
Flow CFM - 254 - - 358 - - 461 - - 507
2000

Ft Side Wall 13 - 19 20 - 28 23 - 33 26 -
Flow CFM - 305 - - 431 - - 554 - - -
Ft Side Wall 15 - 21 24 - 34 27 - 38 - -
MODEL 2000, 21000, 2200 (30 DEFLECTION)
Outlet Velocity (Vk) - - 1265 - - 1380 - - 1495 -
Total Pressure (Pt) - - .100 - - .119 - - .139 -
Static Pressure (Ps) - - .084 - - .100 - - .118 -
Listed Width
(in inches) NC - - 31 - - 34 - - 36 -
Flow CFM - - 79 - - 86 - - 94 -
Ft Side Wall 20 15 - 22 17 - 24 17 - 25
Flow CFM - - 108 - - 117 - - 127 -
Ft Side Wall 20 15 - 22 17 - 24 17 - 25
Flow CFM - - 139 - - 152 - - 164 -
LINEAR DIFFUSERS
AND GRILLES
Ft Side Wall 23 17 - 24 18 - 26 20 - 28
Flow CFM - - 164 - - 179 - - 194 -
Ft Side Wall 25 18 - 26 20 - 28 21 - 30
Flow CFM - - 193 - - 211 - - 228 -
Ft Side Wall 26 20 - 28 21 - 30 22 - 33
Flow CFM - - 221 - - 242 - - 262 -
LINEAR BAR GRILLES

Ft Side Wall 29 22 - 32 24 - 34 25 - 36
Flow CFM - - 278 - - 304 - - 329 -
Ft Side Wall 31 23 - 33 24 - 35 27 - 38
Flow CFM - - 335 - - 366 - - 396 -
Ft Side Wall 31 23 - 33 24 - 25 27 - 38
Flow CFM - - 449 - - - - - - -
Ft Side Wall 33 24 - 34 - - - - - -
Flow CFM - - - - - - - - - -
2000

Ft Side Wall 37 - - - - - - - - -
Flow CFM - - - - - - - - - -
Ft Side Wall - - - - - - - - - -

DEFINITION OF UNITS
VK Outlet Velocity
LINEAR DIFFUSERS
AND GRILLES
LINEAR BAR GRILLES
2000
MODEL 2300, 2400 (0 AND 15 DEFLECTION)
Total Pressure (Pt) - 0.02 - - .038 - - .062 - - .076
Static Pressure (Ps) - 0.015 - - .029 - - .049 - - .61
Listed Width
(in inches) NC - 15 - - 18 - - 24 - - 28
Flow CFM - 31 - - 44 - - 56 - - 63
1.5 Throw Sill of Floor 7 - 11 11 - 16 12 - 17 13 -
Ft Side Wall 10 - 13 13 - 19 16 - 22 17 -
Flow CFM - 43 43 - 60 - - 77 - - 85
Ft Side Wall 8 - 12 12 - 18 16 - 22 17 -
Flow CFM - 55 - - 77 - - 99 - - 110
LINEAR DIFFUSERS
AND GRILLES
Ft Side Wall 10 - 13 13 - 19 17 - 24 19 -
Flow CFM - 65 - - 91 - - 117 - - 130
Ft Side Wall 10 - 14 16 - 22 18 - 26 20 -
Flow CFM - 76 - - 107 - - 137 - - 153
Ft Side Wall 10 - 14 16 - 22 18 - 26 20 -
Flow CFM - 88 - - 123 - - 158 - - 175
LINEAR BAR GRILLES

Ft Side Wall 12 - 17 18 - 26 20 - 30 24 -
Flow CFM - 110 - - 154 - - 198 - - 220
Ft Side Wall 12 - 18 18 - 26 22 - 31 25 -
Flow CFM - 133 - - 186 - - 239 - - 265
Ft Side Wall 12 - 18 18 - 26 23 - 32 26 -
Flow CFM - 178 - - 249 - - 320 - - 355
Ft Side Wall 14 - 20 20 - 29 24 - 34 28 -
Flow CFM - 223 - - 312 - - 401 - - 445
2000

Ft Side Wall 16 - 23 24 - 34 28 - 40 31 -
Flow CFM - 268 - - 375 - - 482 - - -
Ft Side Wall 18 - 25 29 - 42 32 - 46 - -

MODEL 2300, 2400 (0 AND 15 DEFLECTION)
Listed Width
(in inches) NC - - 31 - - 35 - - 37 -
Flow CFM - - 69 - - 75 - - 81 -
1.5 Throw Sill of Floor 19 16 - 22 16 - 23 17 - 24
Ft Side Wall 24 18 - 26 20 - 29 20 - 30
Flow CFM - - 94 - - 102 - - 111 -
Ft Side Wall 24 18 - 26 20 - 29 20 - 30
Flow CFM - - 121 - - 132 - - 143 -
LINEAR DIFFUSERS

AND GRILLES
Ft Side Wall 28 20 - 29 22 - 31 24 - 34
Flow CFM - - 143 - - 156 - - 169 -
Ft Side Wall 30 22 - 31 24 - 34 25 - 36
Flow CFM - - 168 - - 183 - - 198 -
Ft Side Wall 30 22 - 31 24 - 34 25 - 36
Flow CFM - - 193 - - 210 - - 228 -
LINEAR BAR GRILLES
Ft Side Wall 35 26 - 38 29 - 41 30 - 31
Flow CFM - - 242 - - 264 - - 286 -
Ft Side Wall 36 26 - 38 29 - 41 31 - 44
Flow CFM - - 292 - - 318 - - 345 -
Ft Side Wall 37 28 - 40 29 - 42 32 - 46
Flow CFM - - 391 - - - - - - -
Ft Side Wall 40 29 - 41 - - - - - -
Flow CFM - - - - - - - - - -
2000

Ft Side Wall 44 - - - - - - - - -
Flow CFM - - - - - - - - - -
Ft Side Wall - - - - - - - - - -
DEFINITION OF UNITS
VK Outlet Velocity
LINEAR DIFFUSERS
AND GRILLES
LINEAR BAR GRILLES
2000

MODEL 2300, 2400 (30 DEFLECTION)
Listed Width
(in inches) NC - - - - 15 - - 20 - - 23
Flow CFM - 36 - - 50 - - 65 - - 71
Ft Side Wall 10 - 13 13 - 19 16 - 22 17 -
Flow CFM - 48 - - 68 - - 88 - - 97
Ft Side Wall 8 - 12 12 - 18 16 - 22 17 -
Flow CFM - 63 - - 89 - - 114 - - 125
LINEAR DIFFUSERS

AND GRILLES
Ft Side Wall 10 - 13 13 - 19 17 - 24 19 -
Flow CFM - 74 - - 105 - - 135 - - 148
Ft Side Wall 10 - 14 16 - 22 18 - 26 20 -
Flow CFM - 87 - - 123 - - 156 - - 174
Ft Side Wall 11 - 16 16 - 22 19 - 28 22 -
Flow CFM - 100 - - 141 - - 181 - - 200
LINEAR BAR GRILLES
Ft Side Wall 12 - 17 18 - 26 20 - 30 24 -
Flow CFM - 125 - - 177 - - 228 - - 251
Ft Side Wall 12 - 18 18 - 26 22 - 31 25 -
Flow CFM - 157 - - 213 - - 274 - - 302
Ft Side Wall 12 - 18 18 - 26 23 - 32 26 -
Flow CFM - 202 - - 286 - - 367 - - 355
Ft Side Wall 14 - 20 20 - 29 24 - 34 28 -
Flow CFM - 254 - - 358 - - 461 - - 507
2000

Ft Side Wall 16 - 23 24 - 34 28 - 40 31 -
Flow CFM - 305 - - 431 - - 554 - - -
Ft Side Wall 18 - 25 29 - 42 32 - 46 - -
MODEL 2300, 2400 (30 DEFLECTION)
Listed Width
(in inches) NC - - 23 - - 29 - - 31 -
Flow CFM - - 79 - - 86 - - 94 -
Ft Side Wall 24 18 - 26 20 - 29 20 - 30
Flow CFM - - 108 - - 117 - - 127 -
Ft Side Wall 24 18 - 26 20 - 29 20 - 30
Flow CFM - - 139 - - 152 - - 164 -
LINEAR DIFFUSERS
AND GRILLES
Ft Side Wall 28 20 - 29 22 - 31 24 - 34
Flow CFM - - 164 - - 179 - - 194 -
Ft Side Wall 30 22 - 31 24 - 34 25 - 36
Flow CFM - - 193 - - 211 - - 228 -
Ft Side Wall 31 24 - 34 25 - 36 26 - 38
Flow CFM - - 221 - - 242 - - 262 -
LINEAR BAR GRILLES

Ft Side Wall 35 26 - 38 29 - 41 30 - 43
Flow CFM - - 278 - - 304 - - 329 -
Ft Side Wall 36 26 - 38 29 - 41 31 - 44
Flow CFM - - 335 - - 366 - - 396 -
Ft Side Wall 37 26 - 38 29 - 42 31 - 44
Flow CFM - - 449 - - - - - - -
Ft Side Wall 40 29 - 41 - - - - - -
Flow CFM - - - - - - - - - -
2000

Ft Side Wall 44 - - - - - - - - -
Flow CFM/Ft - - - - - - - - - -
Ft Side Wall - - - - - - - - - -

DEFINITION OF UNITS
VK Outlet Velocity
LINEAR DIFFUSERS
AND GRILLES
LINEAR BAR GRILLES
2000
MODEL UP2000
The models UP2000 (un-insulated) and UPI2000 (insulated)
are designed to connect the 2000 series to the ducted supply
or return system. The UP2000 is constructed of galvanized
steel. The height of the plenum is 10".
Tag: Engineer:
Standard insulation on UPI2000 is 1/2" Fiberglass
Optional external insulation and internal closed cell foam insulation are also available
Standard
Date: inlet sizes are 6" (round) or 8",By:
Submitted 10", 12" and 14" (oval)
Standard lengths
Architectural available
Linear are 24", 36", 48", 60" and 72"
Diffusers
Submittal: UP/UPI 2000
LBG - Linear Bar Grilles Plenum
Models: UP/UPI Universal Plenum
LINEAR DIFFUSERS
W 1
AND GRILLES
2 1/8 2
1
2
A
10.5
2000H, 2100H, 2300H,
Oval Width (B) 2400H 2000H, 2100H, 2300H, 2400H3
3
Linear Bar DIM W (O,D. Linear Bar DIM W (O.D.4
Grilles Width Width) Grilles Width Width)
1.5 1.875 13 13.375
Engineer: Optional
Plenum Length
2 = Listed 2.375
Size 13.5 13.875
Contractor: Internal
Architect: Insulation 2.5 2.875 14 14.375
LINEAR BAR GRILLES

Submitted By:
Linear Diffusers
Submittal: UP/UPI 2000 3 3.375 14.5 14.875
Inlet Chart
ar Grilles Plenum Size Type 3.5A 3.875
B 15 15.375
Universal Plenum 3/8 1/4 6 Round 5
4 7/8 4.375 15.5 15.875
8 Oval 5 7/8 8 15/16
10 Oval
4.5
5 7/8
4.875
12 1/16
16 16.375
W 1
2 1/8 12 Oval 5 7/8 155.375
1/4 16.5 16.875
2
14 Oval 5 7/8 18 7/16
1 5.5 5.875 17 17.375
2
6 6.375 17.5 17.875
2000H,2100H, 2000H, 2100H,
2300H, 2400H6.5 6.875 2300H,182400H 18.375
A LINEAR BAR DIM W LINEAR BAR DIM W
Oval Width (B) GRILLES33WIDTH (O.D.7 WIDTH) 7.375 18.5 18.875
GRILLES WIDTH (O.D. WIDTH)
1.54 1.875
7.5 7.875 13 19 13.375
19.375
2 2.375 13.5 13.875
2.5 8
2.875 8.375 14 19.5 19.875
14.375
UP2000/UPI2000
Optional 3 3.375 14.5 14.875

Plenum Length = Listed Size 3.5
8.5
3.875
8.875 15 20 20.375
15.375
Internal
Insulation 4 4.375
9 9.375 15.5 20.5 15.875
20.875
4.5 4.875 16 16.375
Inlet Chart 5 5.375
9.5 9.875 16.5 21 16.875
21.375
Inlet Chart 5.5 5.875 17 17.375
Size Type ASize B Type A B 6 10
6.375 10.375 17.5 21.5 21.875
17.875
1/4 6 Round 5 7/8 6.5 6.875 18 18.375
8 Oval 5 7/86 Round
8 15/16 5 7/8 7
10.5
7.375
10.875 18.5 22 22.375
18.875
10 Oval 5 7/8 12 1/16 7.5 7.875 19 19.375
8 Oval 5 7/8 8 15/16 11 11.375 22.5 22.875
12 Oval 5 7/8 15 1/4 8 8.375 19.5 19.875
14 Oval 5 7/8
10 18 7/16Oval 5 7/8 12 1/168.5 11.5
8.875 11.875 20 23 23.375
20.375
9 9.375 20.5 20.875
12 Oval 5 7/8 15 1/49.5 12
9.875 12.375 21 23.5 23.875
21.375
2000H,2100H, 2000H, 2100H,
2300H, 2400H 10 10.375 21.5 21.875
14 Oval 2300H,5 2400H
7/8 18 7/16 12.5 12.875 24 24.375
LINEAR BAR DIM W LINEAR BAR DIM W 10.5 10.875 22 22.375
GRILLES WIDTH (O.D. WIDTH) GRILLES WIDTH (O.D. WIDTH) 11 11.375 22.5 22.875
Insulation 1.5Options 1.875 13 13.375 11.5 11.875 23 23.375
STD Standard Insulation 2 1/2" Fiberglass2.375 13.5 13.875 12 12.375 23.5 23.875 LDG159
CC Closed Cell Foam2.5 2.875 14 14.375 12.5 12.875 24 24.375
3 3.375 14.5 14.875
Hanger Bracket Installation into Hemmed Ducts
Hanger Bracket Installation into Hemmed Ducts
INSTALLATION INFORMATION
The hanger bracket mounting system is also designed
to work well with factory supplied subframe material
both P and W styles. In order to ensure a
satisfactory subframe installation, the following
procedures should be followed:
The factory supplied subframe material should be cut to
the proper length (i.e., the nominal size of the Grille).
The neck of the subframe should be attached to the
outside of the ductwork with the ends of the duct nestled
in the channel of the subframe extrusion.
Care should be taken that the face of the subframe
material is parallel to the finished surface, and, if being HANGER BRACKET INSTALLATION
used as a plaster ground, the P" subframe is recessed INTO HEMMED DUCTS
LINEAR DIFFUSERS
the proper distance from the designed finish wall.

AND GRILLES
Auxiliary Subframe Preparation "P" and "W" Styles

The long sides of the subframe must be braced with
appropriately sized spacer bars to prevent distortion of
the subframe dimensionally, especially during plastering.
Note: this bracing must be done prior to plastering.
The spacer bars should remain in place until the Grille is Auxiliary Subframe Preparation "P" and "W" Styles
installed, and, in a long run, should be removed only when
each Grille section is ready for installation. Subframe
material used on long runs should be aligned section to
section by use of the factory supplied alignment splines.
In addition to serving as a plaster ground, the P" style
auxiliary subframe is designed to accommodate standard
LINEAR BAR GRILLES
concealed spline ceiling tiles. The W" style auxiliary

subframe is installed in much the same manner as the A
P" style subframe, except that it is usually placed in a
ceiling directly against a sidewall. Note that Model 2000 AUXILLARY SUBFRAME PREPARATION
Bar Grilles cannot be used with a W" style subframe next "P" AND "W" STYLES
to a wall because the 1" border of the Grille would overlap
the subframe. A
UP2000/UPI2000
Installation Information
INSTALLATION INFORMATION
Hanger Bracket Installation
HANGER BRACKET into Auxiliary Subframe
INSTALLATION In order to ensure a satisfactory installation, the
Installation Information following procedures should be followed:
INTO AUXILIARY SUBFRAME
Hanger Bracket Installation into Auxiliary Subframe Arrange the appropriate number of hanger brackets and
hanger screw mounts (shipped unattached) on the neck
of the Grille, positioning the brackets over the hanger
screw mounts.
Insert the supplied #8 X 3" screws through their mounts
and into the proper hole in the hanger brackets, locking
the Grille and hangers together.
Position the Grille carefully in the duct opening and press
into position, pushing the legs of the hanger brackets
past the extruded channel of the auxiliary subframe,
B1 allowing them to snap into position (if necessary, press
LINEAR DIFFUSERS
the hanger brackets upward with the screws to seat the
AND GRILLES
B1 brackets properly).
Tighten the screws to draw the Grille firmly against the
Series 2000 and 2300 Linear Bar Grilles and Registers
ceiling or sidewall, adjusting the tension to accommodate
are easily installed into auxiliary subframe material
any variation in the mounting surface. In installations
using factory supplied hanger brackets and leveling
where long runs are composed of many separate units,
screws according to the following instructions:
Hanger Bracket Installation into Auxiliary Subframe the same procedure should be followed on each Grille
section, taking care to use the factory supplied alignment
Hanger Bracket Installation into Auxiliary Subframe splines to ensure a smooth and unbroken appearance.
LINEAR BAR GRILLES

B2
Model 2100 Units 1/2 inch Borders Model 2100B2
Bar Grilles and Registers are installed into auxiliary
subframes following basically the procedures outlined
above. Special care must be taken, however, in the
installation of the 2100 unit due to the extremely narrow
UP2000/UPI2000
frame borders of these units. Installation should proceed

as follows:

LBG - Linear Bar Grilles
DIMENSIONS
Dimensions and AND CONTINUOUS
Continuous Runs RUNS
Contact your representative for availability of other angles
LINEAR DIFFUSERS
AND GRILLES
LINEAR BAR GRILLES
UP2000/UPI2000
The METALAIRE line of high performance Plenum Slot Diffusers and Light Troffer Diffusers
is designed to provide a tight air discharge pattern in variable flow conditions, making the
METALAIRE Plenum Slot Diffusers an excellent choice for VAV systems.
Plenums are fabricated to ensure straightness, rigidity and maximum performance. The plenum
heights are engineered to minimize pressure drop and sound levels while maximizing room air
induction and comfort.
Plenum Diffusers with adjustable pattern controllers are

high performance slot diffusers designed to control discharge
direction. The units can be adjusted from full horizontal to full
PAGE 2
vertical discharge.

Plenum Diffusers with high capacity fixed patterns are high
induction slot diffusers designed to maximize air entrainment
and provide excellent mixing in the space. The diffusers are
designed to minimize pressure drops and noise. PAGE 27
Light Troffer Diffusers are available with both single and

dual sides designed with the flexibility to mount onto T-bar
light fixtures regardless of the manufacturer. The product line
includes a matching single sided return diffuser. PAGE 42
Accessories for plenum slot diffusers include dampers and

plaster frames. PAGE 52
2013 Metal Industries, Inc. PSD1

PLENUM DIFFUSERS WITH
ADJUSTABLE PATTERN CONTROLLERS
Models PHPS/PHNS are high performance slot diffusers designed with a

gasket tip deflection blade to control discharge direction. Gasket is mounted
in a heavy extruded blade to ensure a tight seal and maximize performance. PAGE 3
PLENUM SLOT
DIFFUSERS
Model PHPS-IT Is a high performance slot diffuser with uniquely designed ice
tong pattern controllers providing a greater range of air pattern adjustability. PAGE 22
ADJUSTABLE PATTERN
CONTROLLERS
PSD2 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
MODEL PHPS/PHNS
The PHPS is a high performance, competitively
priced plenum slot diffuser. The diffusers are
constructed of corrosion-resistant steel. They are
designed to provide high performance from minimum
to maximum flows making them an excellent
selection for VAV systems.
Heavy duty extruded aluminum pattern controller and gasket for
tight horizontal discharge pattern
Field adjustable pattern controllers allow full horizontal to full vertical discharge
Units available in 1 to 4 slots to meet a wide range of applications and capabilities
Double hemmed face construction for rigidity and straightness with extruded aluminum center tees
PHPR return model offers low pressure drop return. Integral light shield hides interior of unit
Optional insulation on PHPSI units
Model PHNS for bolt slot application (2 or 4 slot units only)
PLENUM SLOT
DIFFUSERS
Models 1 Slot 2 Slots 3 Slots 4 Slots

Supply Return Nominal Length W A B A B A B A B
PHPS(I)-50-6 PHPR(I)-50-6 24, 36, 48, 60 1/2 1 1/2 1 3/4 3 3 3 1/4 4 1/2 4 3/4 6 6 1/4 ADJUSTABLE PATTERN
CONTROLLERS
PHPS(I)-75-6 PHPR(I)-75-6 24, 36, 48, 60 3/4 1 3/4 2 3 1/2 3 3/4 5 1/4 5 1/2 7 7 1/4
PHPS(I)-10-6 PHPR(I)-10-6 24, 36, 48, 60 1 2 2 1/4 4 4 1/4 6 6 1/4 8 8 1/4
PHPS(I)-15-6 PHPR(I)-15-6 24, 36, 48, 60 1 1/2 2 1/2 2 3/4 5 5 1/4 7 1/2 7 3/4 10 10 1/4
Inlet Size C D
6 Round 5 7/8 6
8 Oval 8 15/16 6
10 Oval 12 1/16 6
12 Oval 15 1/4 6
PHPS

PLENUM SLOT
DIFFUSERS
ADJUSTABLE PATTERN
CONTROLLERS
PHPS
Models 1 Slot with Center Tee 2 Slots with Center Tee 2 Slots with Hat Section
Supply Return Nominal Length W A B A B A B
PHPS(I)-75-9 PHPR(I)-75-9 24, 48 3/4 1 3/4 2 3/8 3 1/2 4 1/8
PHPS(I)-10-9 PHPR(I)-10-9 24, 48 1 2 2 5/8 4 4 5/8
PHPS(I)-15-9 PHPR(I)-15-9 24, 48 1 1/2 2 1/2 3 1/8 5 5 5/8
PHNS(I)-75-9 PHNR(I)-75-9 24, 48 3 7/8 4 1/4
PHNS(I)-10-9 PHNR(I)-10-9 24, 48 4 3/8 5
PHNS(I)-15-9 PHNR(I)-15-9 24, 48 5 3/8 6
PLENUM SLOT
DIFFUSERS
Inlet Size C D
6" Round 5 7/8
8" Oval 8 15/16 6
10" Oval 12 1/16 6
12" Oval 15 1/4 6

ADJUSTABLE PATTERN
CONTROLLERS
PHPS

Supply / Return Plenum Slot Diffusers
Steel - Fineline Ceilings
Models: PHPR ( I ) -75-9 Return - Non Insulated (I - Insulated) - 3/4" Slot Width - Center Tee
PHPR ( I ) -10-9 Return - Non Insulated (I - Insulated) - 1" Slot Width - Center Tee
PHPR ( I ) -15-9 Return - Non Insulated (I - Insulated) - 1 1/2" Slot Width - Center Tee
PHNR ( I ) -75-9 Return - Non Insulated (I - Insulated) - 3/4" Slot Width - Hat Section
PHNR ( I ) -10-9 Return - Non Insulated (I - Insulated) - 1" Slot Width - Hat Section
PHNR ( I ) -15-9 Return - Non Insulated (I - Insulated) - 1 1/2" Slot Width - Hat Section
No Pattern Controller on Return Units
Model: PHPR-9 1 Slot Model: PHPR-9 2 Slots Model: PHNR-9 2 Slots
1/4 Insulation 1/4 Insulation 1/4 Insulation

(Optional) (Optional) (Optional)
2
1 1 1 5
2 1 2 2 1 8 1
2 1
2 2
W W 1 38
A W
W
A W
B
B A
B
Number PHP-9
For Dimensions A, B, L & W See Table on Page 1
Front View
End Clip (4 Places)
2 21
Submittal
5
2 21
Mounting Angle
( 4 Places)
Plenum = Ceiling Module - 58
Overall = T-Bar Module - 41
L = T-Bar Module
PLENUM SLOT

DIFFUSERS

Standard Finish: HS Center Hat Section for 2 Slot units ( see Extruded Aluminum Pattern Controller on
25 - WT - White Tees. PHNS Models ). Supply units, no Pattern Controller on Return
Optional Finish (additional charge): LQ Locking Quadrant Damper. units.
26 - White Tees & Borders. One - piece electrogalvanized steel plenum
27 - Black Tees & Borders. with double hem face.
Units over 24" have a standard cross-notch.
Internal Insulation is 1/4" on one slot units.
Available in lengths and slot widths as shown.
Submittal No. PHP-9 Date: 09/01/2003 Dimensions are in inches Page: 2 of 2

ADJUSTABLE PATTERN
CONTROLLERS
PHPS
SERIES PHP SPECIFICATIONS
SUPPLY T-BAR LAY-IN SUPPLY DONN FINELINE CEILINGS
INSULATED/NON-INSULATED CENTER TEE-INSULATED/NON-INSULATED
Plenum slot supply diffusers shall be METALAIRE PHPS-6 Plenum slot supply diffusers shall be METALAIRE PHPS-9

(non-insulated) or PHPSI-6 (insulated). Plenum slot (non-insulated) or PHPSI-9 (insulated). Plenum slot
diffusers shall be of the sizes and mounting types as diffusers shall be of the sizes and mounting types as
shown on the device schedule. shown on the device schedule.
Diffusers shall have aluminum extruded deflector blades
Units shall be designed to integrate into 9/16" wide bolt
with a gasket tip to seal against the plenum side wall slot or narrow tee systems and include a factory-mounted
or slot divider. Units shall be adjustable from the slot 1" wide white center tee on two-slot units. Diffusers shall
opening to provide horizontal to vertical air patterns. have aluminum extruded deflector blades with a gasket
Inlets shall be round or oval, centrally located, with a tip to seal against the plenum side wall or slot divider.
minimum depth of 2 1/8" for ease of duct connection. Units shall be adjustable from the slot opening to provide
Units with inlet depths less than 1 3/4" are not horizontal to vertical air patterns.
acceptable. For straightness and rigidity, plenums shall
Inlets shall be round or oval, centrally located, with a
be fabricated using a single-piece panel construction and minimum depth of 2 1/8" for ease of duct connection.
have a double metal thickness hem at the face. Plenum Units with inlet depths less than 1 3/4" are not
diffusers shall be constructed of corrosion resistant acceptable. For straightness and rigidity, plenums shall
galvanized steel. Height of unit shall be 10" or greater to be fabricated using a single-piece panel construction and
maximize diffuser performance. have a double metal thickness hem at the face. Plenum
Units with heights less than 10" are not acceptable. diffusers shall be constructed of corrosion resistant
Units shall be available with 1/2", 3/4", 1", or 1 1/2" slot galvanized steel. Height of unit shall be 10" or greater.
widths and be available with 1, 2, 3, or 4 independent Units with heights less than 10" are not acceptable.
supply slots. Diffuser face and air pattern controller shall
Units shall be available with 3/4", 1", or 1 1/2" slot
be black. Optional tees shall be white. widths and be available with 1 or 2 independent
PLENUM SLOT
supply slots. Diffuser face and air pattern controller

DIFFUSERS
Insulated diffusers shall be Model PHPSI. Insulation shall
shall be white.
be internal.

Insulated diffusers shall be Model PHPSI. Insulation shall
RETURN T-BAR LAY-IN
be internal.
INSULATED/NON-INSULATED
RETURN DONN FINELINE CEILINGS
Plenum slot return diffusers shall be METALAIRE PHPR-6 CENTER TEE-INSULATED/NON-INSULATED
(non-insulated) or PHPRI-6 (insulated). Return diffusers
shall be of the sizes and mounting types as shown on the Plenum slot return diffusers shall be METALAIRE PHPR-9

outlet schedule. (non-insulated) or PHPRI-9 (insulated). Return diffusers

shall be of the sizes and mounting types as shown on the
Units shall be designed for plenum return applications
outlet schedule.

and match face appearance of the supply diffusers. Units
shall include a light shield to minimize reflective light
Units shall be designed for plenum return applications ADJUSTABLE PATTERN
coming through the slot opening. and match face appearance of the supply diffusers.
CONTROLLERS
Units shall include a light shield to minimize reflective

Plenum return units shall be constructed of corrosion
light coming through the slot opening. Units shall be
resistant galvanized steel. For straightness and
designed to integrate into a 9/16" wide bolt-slot or narrow
rigidity, plenums shall be fabricated using a double metal
tee system.
thickness hem at the face. Units fabricated without a
double metal thickness hem at the face are
Plenum return units shall be constructed of corrosion
not acceptable. resistant galvanized steel. For straightness and rigidity,
plenums shall be fabricated with a double metal
Units shall be available with 1/2", 3/4", 1", or 1 1/2" slot
thickness hem at the face. Units fabricated without a
widths and be available with 1, 2, 3, or 4 independent
double metal thickness at hem are not acceptable.
supply slots. Diffuser face shall be black. Optional tees
shall be white.

Units shall be available with 3/4", 1", or 1 1/2" slot
widths and be available with 1 or 2 slots. Diffuser face
shall be white. Optional tees shall be white.
PHPS

SUPPLY DONN FINELINE CEILINGS RETURN DONN FINELINE CEILINGS
HAT SECTION INSULATED/ HAT SECTION INSULATED/
NON-INSULATED NON-INSULATED
Plenum slot supply diffusers shall be METALAIRE PHNS-9 Plenum slot return diffusers shall be METALAIRE PHNR-9
(non-insulated) or PHNSI-9 (insulated). Plenum slot (non-insulated) or PHNRI-9 (insulated). Return diffusers
diffusers shall be of the sizes and mounting types as shall be of the sizes and mounting types as shown on the
shown on the device schedule. outlet schedule.
Units shall be designed to integrate into 9/16" wide Units shall be designed for plenum return applications
bolt slot or narrow tee systems and include a center hat and match face appearance of the supply diffusers.
channel to fit over ceiling tee (by others) on two-slot units. Units shall include a light shield to minimize reflective
Diffusers shall have aluminum extruded deflector blades light coming through the slot opening. Units shall be
with a gasket tip to seal against the plenum side wall designed to integrate into a 9/16" wide bolt-slot or
or slot divider. Units shall be adjustable from the slot narrow tee system.
opening to provide horizontal to vertical air patterns. Plenum return units shall be constructed of corrosion
Inlets shall be round or oval, centrally located, with a resistant galvanized steel. For straightness and rigidity,
minimum depth of 2 1/8" for ease of duct connection. plenums shall be fabricated with a double metal
Units with inlet depths less than 1 3/4" are not thickness hem at the face. Units fabricated without a
acceptable. For straightness and rigidity, plenums shall double metal thickness at hem are not acceptable.
be fabricated using a single-piece panel construction and Units shall be available with 3/4", 1", or 1 1/2" slot
have a double metal thickness hem at the face. Plenum widths and be available with 2 or 4 slots. Diffuser face
diffusers shall be constructed of corrosion resistant shall be white. Optional tees shall be white.
galvanized steel. Height of unit shall be 10" or greater.
Units with heights less than 10" are not acceptable. Performance Specification
Units shall be available with 3/4", 1", or 1 1/2" slot The manufacturer shall provide published performance
widths and be available with 2 or 4 independent data. Data shall be tested in accordance to ANSI/
PLENUM SLOT
supply slots. Diffuser face and air pattern controller ASHRAE Standard 70-2006.
DIFFUSERS
shall be white.
Insulated diffusers shall be Model PHPSI. Insulation shall Paint Specification
be internal. Process shall be anodic electro-deposition using an
ADJUSTABLE PATTERN
CONTROLLERS
PHPS
PHP MODEL NUMBER SPECIFICATION
PLENUM SLOT DIFFUSER
Non-insulated # of Slots Slot Lengths Inlets Available Finishes
PHPS-50-6 1/2" Slot Width 1 24" No Inlet Standard Finish
PHPS-75-6 3/4" Slot Width 2 36" 6" Round 25 White Tee / Black Border
PHPS-10-6 1" Slot Width 3 48" 8" Oval Optional Finishes
PHPS-15-6 1 1/2" Slot Width 4 60" 10" Oval 26 All White
12" Oval 27 All Black
14" Oval
Insulated # of Slots Slot Lengths Inlets Available Accessories

PHPSI-50-6 1/2" Slot Width 1 24" No Inlet LQ Locking Quadrant Damper
PHPSI-75-6 3/4" Slot Width 2 36" 6" Round PHP-TBPF T-bar Plaster Frame
PHPSI-10-6 1" Slot Width 3 48" 8" Oval CC Closed Cell Insulation
PHPSI-15-6 1 1/2" Slot Width 4 60" 10" Oval EI External Fiberglass Insulation
12" Oval
14" Oval
Available Options
CN Cross Notch (Standard on Units over 24")
T-1 One Outside Tee
T-2 Two Outside Tees
PLENUM SLOT
TC-1 One Outside T-bar Clip
DIFFUSERS
TC-2 Bar Clips Both Ends
TC-3 One T-bar Clip / One Outside Tee
EN End Notch
EN-2 End Notch / Two Tees
NB No Blades

ADJUSTABLE PATTERN
CONTROLLERS
PHPS

Center Tee - Non-insulated # of Slots Slot Lengths Inlets Available Finishes

PHPS-75-9 3/4" Slot Width 1 24" No Inlet Standard Finish
PHPS-10-9 1" Slot Width 2 48" 6" Round 25 White Tee / Black Border
PHPS-15-9 1 1/2" Slot Width 3 8" Oval Optional Finishes
4 10" Oval 26 All White
14" Oval Available Accessories
LQ Locking Quadrant Damper
NB No Blades
Hat Section - Non-insulated # of Slots Slot Lengths Inlets Available Finishes

PHNS-75-9 3/4" Slot Width 2 24" No Inlet Standard Finish
PHNS-10-9 1" Slot Width 4 48" 6" Round 25 White Tee / Black Border
PHNS-15-9 1 1/2" Slot Width 8" Oval Optional Finishes
10" Oval 26 All White
NB No Blades
Center Tee - Insulated # of Slots Slot Lengths Inlets Available Finishes

PLENUM SLOT
DIFFUSERS
PHPSI-75-9 3/4" Slot Width 1 24" No Inlet Standard Finish

PHPSI-10-9 1" Slot Width 2 48" 6" Round 25 White Tee / Black Border
PHPSI-15-9 1 1/2" Slot Width 3 8" Oval Optional Finishes
4 10" Oval 26 All White
NB No Blades
CC Closed Cell Insulation
EI External Fiberglass Insulation

ADJUSTABLE PATTERN
CONTROLLERS
Hat Section - Insulated # of Slots Slot Lengths Inlets Available Finishes

PHNSI-75-9 3/4" Slot Width 2 24" No Inlet Standard Finish
PHNSI-10-9 1" Slot Width 4 48" 6" Round 25 White Tee / Black Border
PHNSI-15-9 1 1/2" Slot Width 8" Oval Optional Finishes
10" Oval 26 All White
NB No Blades
PHPS
Non-insulated # of Slots Slot Lengths Available Finishes

PHPR-50-6 1/2" Slot Width 1 24" Standard Finish
PHPR-75-6 3/4" Slot Width 2 36" 25 White Tee / Black Border
PHPR-10-6 1" Slot Width 3 48" Optional Finishes
PHPR-15-6 1 1/2" Slot Width 4 60" 26 All White
27 All Black
Insulated # of Slots Slot Lengths Available Accessories

PHPRI-50-6 1 24" LQ Locking Quadrant Damper
PHPRI-75-6 2 36" PHP-TBPF T-bar Plaster Frame
PHPRI-10-6 3 48" CC Closed Cell Insulation
PHPRI-15-6 4 60" EI External Fiberglass Insulation
Available Options
T-1 One Outside Tee
T-2 Two Outside Tees
TC-1 One Outside T-bar Clip
TC-2 Bar Clips Both Ends
TC-3 One T-bar Clip / One Outside Tee
PLENUM SLOT
EN End Notch
DIFFUSERS
EN-2 End Notch / Two Tees

ADJUSTABLE PATTERN
CONTROLLERS
PHPS

Center Tee - Non-insulated # of Slots Slot Lengths Available Finishes

PHPR-75-9 3/4" Slot Width 1 24" Standard Finish
PHPR-10-9 1" Slot Width 2 48" 25 White Tee / Black Border
PHPR-15-9 1 1/2" Slot Width 3 Optional Finishes
4 26 All White
27 All Black
Hat Section - Non-insulated # of Slots Slot Lengths Available Finishes

PHNR-75-9 3/4" Slot Width 2 24" Standard Finish
PHNR-10-9 1" Slot Width 4 48" 25 White Tee / Black Border
PHNR-15-9 1 1/2" Slot Width Optional Finishes
26 All White
27 All Black
Center Tee - Insulated # of Slots Slot Lengths Available Finishes

PHPRI-75-9 3/4" Slot Width 1 24" Standard Finish
PLENUM SLOT
PHPRI-10-9 1" Slot Width 2 48" 25 White Tee / Black Border

DIFFUSERS
PHPRI-15-9 1 1/2" Slot Width 3 Optional Finishes

4 26 All White
27 All Black
ADJUSTABLE PATTERN
Hat Section - Insulated # of Slots Slot Lengths Available Finishes

PHNRI-75-9 3/4" Slot Width 2 24" Standard Finish
CONTROLLERS
PHNRI-10-9 1" Slot Width 4 48" 25 White Tee / Black Border

PHNRI-15-9 1 1/2" Slot Width Optional Finishes
26 All White
27 All Black
PHPS
SERIES PHP PERFORMANCE DATA
MODEL PHPS/PHPSI ONE SLOT
CFM/LF 10 15 25 40 60 75 90 120
CFM 20 30 50 80 120 150 180 240
Ps .010 .023 .064 .163 .367 .574 .826 1.469
Horizontal Pt .011 .024 .068 .174 .390 .610 .879 1.562
Throw 2-3-6 3-5-6 5-7-10 7-9-12 9-11-15 10-12-17 11-13-19 12-15-22
2' Length
NC <10 <10 17 29 39 43 47 56
6" Inlet
Ps .013 .029 .082 .209 .471 .736 1.060 1.885
Pt .014 .031 .086 .220 .495 .773 1.113 1.978
Vertical
Throw 1-1-3 1-2-4 2-3-7 4-5-11 5-8-16 7-10-20 8-12-24 11-16-32
NC <10 <10 15 29 38 42 45 52
CFM 40 60 100 160 240 300 360 -
Ps .010 .023 .063 .160 .360 .563 .810 -
Horizontal Pt .013 .028 .079 .201 .453 .708 1.020 -
1/2" Slot Width
Throw 2-3-7 3-5-10 6-8-14 9-12-18 12-15-22 14-17-24 15-19-26 -

4' Length
NC <10 <10 20 32 42 46 50 -
6" Inlet
Ps .013 .029 .080 .205 .462 .722 1.039 -
Pt .015 .035 .096 .247 .555 .867 1.249 -
Vertical
Throw 2-3-5 3-4-8 4-6-13 7-10-20 10-15-30 13-19-38 15-23-46 -
NC <10 <10 18 32 41 45 48 -
CFM 50 75 125 200 300 375 450 -
Ps .010 .022 .061 .157 .353 .551 .794 -
Horizontal Pt .011 .025 .070 .180 .405 .633 .912 -
Throw 3-4-8 4-6-12 7-11-16 11-14-20 14-17-24 16-19-27 17-21-29 -
5' Length
NC <10 11 22 34 44 48 52 -
8" Inlet
Ps .013 .028 .079 .201 .453 .707 1.018 -
Pt .014 .032 .088 .224 .505 .789 1.136 -
Vertical
Throw 2-3-7 3-5-10 5-8-16 9-13-26 13-20-40 16-25-49 20-30-59 -
PLENUM SLOT
NC <10 12 26 39 46 50 55 -
DIFFUSERS
CFM 20 30 50 80 120 150 180 240
Ps .007 .015 .041 .104 .235 .367 .528 .939
Horizontal Pt .007 .015 .042 .108 .243 .380 .973 -
Throw 2-3-5 3-4-7 4-6-8 7-8-12 8-10-14 9-11-16 10-12-17 12-14-20
2' Length
NC <10 <10 <10 23 32 37 40 47
8" Inlet
Ps .008 .017 .048 .123 .277 .433 .623 1.108
Pt .008 .018 .050 .127 .285 .446 .642 1.141
Vertical
Throw 1-1-2 1-2-3 2-3-5 3-4-9 4-7-13 5-8-16 7-10-20 9-13-26
NC <10 <10 <10 24 36 41 45 54
CFM 40 60 100 160 240 300 360 -
Ps .006 .014 .040 .102 .230 .360 .518 -

Horizontal Pt .007 .016 .046 .117 .264 .412 .593 -
ADJUSTABLE PATTERN
3/4" Slot Width
Throw 2-3-6 3-4-8 5-7-13 7-11-16 11-14-20 13-16-22 14-17-25 -

4' Length
NC <10 <10 15 26 35 40 43 -
CONTROLLERS
8" Inlet
Ps .008 .017 .047 .121 .272 .424 .611 -
Pt .008 .019 .053 .136 .305 .477 .686 -
Vertical
Throw 1-2-4 2-3-6 3-5-10 6-8-17 8-12-25 10-15-31 12-19-37 -
NC <10 12 27 39 44 48 - -
CFM 50 75 125 200 300 375 450 -
Ps .006 .014 .039 .100 .226 .353 .508 -
Horizontal Pt .08 .017 .048 .124 .278 .434 .626 -
Throw 2-4-7 4-6-11 6-9-14 10-13-18 13-16-22 14-18-25 16-19-27
5' Length
NC <10 <10 17 28 37 42 45 -
8" Inlet
Ps .007 .017 .046 .118 .266 .416 .599 -
Pt .009 .020 .055 .142 .319 .498 .717 -
Vertical
Throw 2-3-5 3-4-8 4-7-13 7-11-22 11-16-32 13-20-40 16-24-48 -
NC <10 <10 14 29 41 46 50 -
PHPS

MODEL PHPS/PHPSI ONE SLOT
CFM/LF 10 15 25 40 60 75 90 120 160
CFM 20 30 50 80 120 150 180 240 320
Ps .005 .010 .028 .073 .163 .255 .368 .654 1.162
Horizontal Pt .005 .011 .030 .076 .172 .268 .387 .687 1.222
Throw 3-4-6 4-5-7 5-6-9 6-8-11 8-10-14 9-11-15 10-12-17 11-14-19 13-16-23
2' Length
NC <10 <10 10 23 32 36 39 44 53
8" Inlet
Ps .007 .016 .044 .113 .254 .396 .571 1.015 1.804
Pt .007 .016 .046 .116 .262 .410 .590 1.048 1.864
Vertical
Throw 0-1-1 1-1-2 1-2-4 2-3-6 3-4-9 4-5-11 4-7-13 6-9-18 8-12-23
NC <10 <10 <10 22 35 40 43 47 55
CFM 40 60 100 160 240 300 360 480 -
Ps .004 .010 .028 .071 .160 .250 .361 .641 -
Horizontal Pt .005 .012 .034 .086 .194 .303 .436 .775 -
1" Slot Width
Throw 1-2-4 2-3-7 4-5-11 6-9-16 9-13-19 11-15-22 13-17-24 16-19-28 -

4' Length
NC <10 <10 13 26 35 39 42 47 -
8" Inlet
Ps .007 .016 .043 .111 .249 .389 .560 .995 -
Pt .008 .018 .049 .125 .282 .441 .635 1.129 -
Vertical
Throw 1-2-3 2-2-5 3-4-8 4-6-13 6-10-19 8-12-24 10-14-29 13-19-38 -
NC <10 <10 <10 25 38 43 46 50 -
CFM 50 75 125 200 300 375 450 600 -
Ps .004 .010 .027 .070 .157 .245 .353 .628 -
Horizontal Pt .005 .011 .032 .082 .184 .287 .413 .735 -
Throw 5-6-9 6-8-11 8-10-14 10-13-18 13-15-22 14-17-24 15-19-27 18-22-31 -
5' Length
NC <10 <10 15 28 37 41 44 49 -
10" Inlet
Ps .007 .015 .042 .108 .244 .381 .549 .975 -
Pt .008 .017 .047 .120 .271 .423 .609 1.082 -
Vertical
Throw 1-2-4 2-3-7 4-5-11 6-9-18 9-13-26 11-16-33 13-20-39 18-26-53 -
PLENUM SLOT
NC <10 <10 11 27 40 45 48 52 -
DIFFUSERS
CFM 20 30 50 80 120 150 180 240 320

Ps .004 .010 .027 .069 .155 .242 .349 .620 1.102
Horizontal Pt .005 .010 .028 .073 .163 .255 .368 .654 1.162
Throw 1-2-3 2-2-5 3-4-8 4-6-11 6-9-13 8-10-15 9-11-16 11-13-18 12-15-21
2' Length
NC <10 <10 <10 13 22 29 34 42 50
8" Inlet
Ps .003 .007 .020 .052 .117 .183 .263 .468 .831
Pt .003 .008 .022 .056 .125 .196 .282 .501 .891
Vertical
Throw 0-1-1 1-1-2 1-1-3 1-2-4 2-3-7 3-4-8 3-5-10 4-7-13 6-9-17
NC <10 <10 <10 <10 19 25 30 37 45
CFM 40 60 100 160 240 300 360 480 640
Ps .004 .009 .026 .068 .152 .237 .342 .608 1.081
Horizontal
1 1/2" Slot Width
Pt .005 .012 .032 .082 .186 .290 .417 .742 1.319

ADJUSTABLE PATTERN
Throw 2-2-5 2-3-7 4-6-12 6-9-15 9-13-18 12-15-21 13-16-23 15-18-26 17-21-30
4' Length
NC <10 <10 <10 16 25 32 37 45 53
CONTROLLERS
8" Inlet
Ps .003 .007 .020 .051 .115 .179 .258 .458 .815
Pt .004 .009 .026 .066 .148 .231 .333 .593 1.054
Vertical
Throw 1-1-2 1-2-4 2-3-6 3-5-10 5-7-14 6-9-18 7-11-21 10-14-29 13-19-38
NC <10 <10 <10 12 22 28 33 40 48
CFM 50 75 125 200 300 375 450 600 800
Ps .004 .009 .026 .066 .149 .233 .335 .596 1.059
Horizontal Pt .005 .011 .031 .078 .176 .275 .395 .703 1.249
Throw 3-4-8 4-6-10 7-9-13 10-12-17 12-15-21 13-16-23 15-18-25 17-21-29 19-24-34
5' Length
NC <10 <10 <10 18 27 34 39 47 55
10" Inlet
Ps .003 .007 .020 .050 .112 .176 .253 .449 .799
Pt .004 .009 .024 .062 .139 .217 .313 .556 .989
Vertical
Throw 1-2-3 2-2-5 3-4-8 4-7-13 7-10-20 8-12-25 10-15-30 13-20-40 18-27-53
NC <10 <10 <10 14 24 30 35 42 50
PHPS
MODEL PHPS/PHPSI TWO SLOT
CFM/LF 10 15 25 40 60 75 90 120 160
CFM 20 30 50 80 120 150 180 240 320
Ps .005 .012 .032 .083 .186 .291 .419 .745 1.324
Horizontal Pt .005 .012 .034 .086 .195 .304 .438 .778 1.383
Throw 1-2-3 2-2-5 3-4-8 4-6-12 6-9-17 8-12-19 9-14-21 13-17-24 16-20-28
2' Length
NC <10. <10. <10. 15 26 32 37 43 51
8" Inlet
Ps .005 .011 .029 .075 .169 .264 .380 .675 1.200
Pt .005 .011 .031 .079 .177 .277 .398 .708 1.259
Vertical
Throw 0-0-2 0-1-3 1-2-6 3-5-9 5-7-14 6-9-17 7-10-21 9-14-28 12-19-37
NC <10. <10. <10. 14 26 33 37 44 51
CFM 40 60 10 160 240 300 360 480 640
Ps .005 .011 .032 .081 .183 .285 .411 .730 1.298
Horizontal Pt .006 .014 .038 .096 .216 .338 .486 .864 1.536
1/2" Slot Width
Throw 1-2-4 2-3-7 4-5-11 6-9-18 9-13-24 11-16-27 13-20-30 18-24-34 23-28-39
4' Length
NC <10. <10. <10. 18 29 35 40 46 54
8" Inlet
Ps .005 .010 .029 .074 .165 .258 .372 .662 1.176
Pt .006 .012 .035 .088 .199 .311 .446 .796 1.415
Vertical
Throw 0-1-2 1-1-5 2-3-8 4-7-13 7-10-20 8-12-24 10-15-29 13-20-39 17-26-52
NC <10. <10. <10. 17 29 36 40 47 54
CFM 50 75 125 200 300 375 450 600 800
Ps .005 .011 .031 .079 .179 .279 .402 .715 1.272
Horizontal Pt .006 .013 .036 .091 .206 .321 .463 .822 1.462
Throw 2-3-6 3-4-8 4-6-13 7-10-21 10-16-27 13-19-30 16-23-33 21-27-38 25-31-44
5' Length
NC <10. <10. <10. 20 31 37 42 48 56
10" Inlet
Ps .005 .010 .028 .072 .162 .253 .365 .648 1.153
Pt .005 .012 .033 .084 .189 .295 .425 .755 1.343
Vertical
Throw 0-1-3 1-2-6 2-5-10 5-8-16 8-12-24 10-15-31 12-18-37 16-24-49 22-33-65
PLENUM SLOT
NC <10. <10. <10. 19 31 38 42 49 56
DIFFUSERS
CFM 20 30 50 80 120 150 180 240 320
Ps .004 .008 .023 .059 .133 .208 .299 .532 .946
Horizontal Pt .004 .009 .025 .063 .141 .221 .318 .565 1.005
Throw 1-2-3 2-2-5 3-4-8 4-6-12 6-9-17 8-11-19 9-14-21 12-17-24 16-20-28
2' Length
NC <10. <10. <10. <10. 20 26 31 38 44
8" Inlet
Ps .003 .008 .021 .054 .122 .191 .275 .490 .871
Pt .004 .008 .023 .058 .131 .204 .294 .523 .930
Vertical
Throw 0-0-2 0-1-3 1-2-6 3-5-9 5-7-14 6-9-17 7-10-21 9-14-27 12-18-37
NC <10. <10. <10. <10. 17 26 31 37 42
CFM 40 60 100 160 240 300 360 480 640
Ps .004 .008 .023 .058 .130 .204 .293 .521 .927

Horizontal Pt .005 .010 .028 .073 .164 .256 .369 .656 1.165
ADJUSTABLE PATTERN
3/4" Slot Width
Throw 2-3-5 3-4-8 4-7-13 7-11-20 11-16-24 13-19-27 16-21-30 20-24-34 23-28-39
4' Length
NC <10. <10. <10. 14 23 29 34 41 47
CONTROLLERS
8" Inlet
Ps .003 .008 .021 .053 .120 .188 .270 .480 .854
Pt .004 .010 .027 .068 .154 .240 .346 .614 1.092
Vertical
Throw 0-1-2 1-1-5 1-3-8 4-6-13 6-10-19 8-12-24 10-14-29 13-19-38 17-25-51
NC <10. <10. <10. <10. 20 29 34 40 45
CFM 50 75 125 200 300 375 450 600 800
Ps .003 .008 .022 .056 .125 .196 .282 .501 .890
Horizontal Pt .004 .009 .026 .067 .152 .237 .342 .607 1.080
Throw 2-3-5 3-4-8 4-6-13 7-10-21 10-15-27 13-19-30 15-21-33 21-27-38 25-31-44
5' Length
NC <10. <10. <10. 16 25 31 36 43 49
10" Inlet
Ps .003 .007 .020 .051 .115 .180 .259 .461 .819
Pt .004 .009 .025 .063 .142 .222 .319 .568 1.009
Vertical
Throw 0-1-3 1-2-6 2-5-10 5-8-15 8-12-23 10-15-29 12-17-35 15-23-46 21-31-62
NC <10. <10. <10. <10. 22 31 36 42 47
PHPS

MODEL PHPS/PHPSI TWO SLOT
CFM/LF 10 15 25 40 60 75 90 120 160
CFM 20 30 50 80 120 150 180 240 320
Ps .002 .005 .014 .035 .080 .124 .179 .318 .566
Horizontal Pt .002 .005 .015 .039 .088 .137 .198 .352 .626
Throw 1-1-3 1-2-4 2-4-7 4-6-12 6-9-17 7-11-19 9-13-21 12-17-24 15-20-28
2' Length
NC <10 <10 <10 <10 17 24 29 35 40
8" Inlet
Ps .002 .005 .013 .034 .077 .120 .172 .306 .545
Pt .002 .005 .015 .038 .085 .133 .191 .340 .604
Vertical
Throw 0-0-1 0-0-2 0-1-4 1-3-6 3-5-9 4-6-12 5-7-14 6-9-19 8-12-25
NC <10 <10 <10 <10 16 24 30 37 42
CFM 40 60 100 160 240 300 360 480 640
Ps .002 .005 .014 .035 .078 .122 .176 .312 .555
Horizontal Pt .003 .007 .019 .050 .112 .174 .251 .446 .793
1" Slot Width
Throw 1-2-4 2-3-6 4-5-11 6-9-17 9-13-24 11-16-27 13-19-30 17-24-34 23-28-39
4' Length
NC <10 <10 <10 <10 20 27 32 38 43
8" Inlet
Ps .002 .005 .013 .033 .075 .117 .169 .300 .534
Pt .003 .007 .019 .048 .109 .170 .244 .435 .772
Vertical
Throw 0-0-1 0-1-2 1-2-5 2-4-9 4-7-13 5-8-16 7-10-20 9-13-26 12-18-35
NC <10 <10 <10 <10 19 27 33 40 45
CFM 50 75 125 200 300 375 450 600 800
Ps .002 .005 .013 .034 .076 .118 .170 .030 .538
Horizontal Pt .003 .006 .018 .046 .102 .160 .230 .410 .728
Throw 2-2-5 2-4-7 4-6-12 7-10-20 10-15-27 12-18-30 15-22-33 20-27-38 25-31-44
5' Length
NC <10 <10 <10 11 22 29 34 40 45
10" Inlet
Ps .002 .005 .013 .032 .073 .114 .164 .291 .518
Pt .003 .006 .017 .044 .100 .156 .224 .398 .708
Vertical
Throw 0-0-1 0-1-3 1-2-7 3-5-11 5-8-16 7-10-20 8-12-24 11-16-32 14-21-43
PLENUM SLOT
NC <10 <10 <10 <10 21 29 35 42 47

DIFFUSERS
CFM 20 30 50 80 120 150 180 240 320

Ps .001 .002 .007 .018 .040 .062 .089 .159 .282
Horizontal Pt .001 .003 .008 .021 .048 .075 .108 .192 .342
Throw 1-1-3 1-2-4 2-3-7 4-5-11 5-8-16 7-10-19 8-12-21 11-16-24 14-20-28
2' Length
NC <10 <10 <10 <10 12 17 21 29 37
8" Inlet
Ps .001 .002 .006 .014 .033 .051 .073 .130 .232
Pt .001 .003 .007 .018 .041 .064 .092 .164 .291
Vertical
Throw 0-0-0 0-0-1 0-0-2 1-1-4 1-3-7 2-4-8 3-5-10 4-7-13 6-9-18
NC <10 <10 <10 <10 <10 10 15 23 30
CFM 40 60 100 160 240 300 360 480 640
Ps .001 .002 .007 .017 .039 .060 .087 .154 .274
Horizontal
1 1/2" Slot Width
Pt .002 .003 .010 .025 .056 .087 .125 .223 .396

ADJUSTABLE PATTERN
Throw 2-2-5 2-3-7 4-6-12 6-9-19 9-14-24 12-17-27 14-21-30 19-24-34 23-28-39
4' Length
NC <10 <10 <10 <10 15 20 24 32 40
CONTROLLERS
10" Inlet
Ps .001 .002 .005 .014 .032 .049 .071 .127 .225
Pt .001 .003 .008 .022 .049 .076 .110 .195 .347
Vertical
Throw 0-0-0 0-0-1 0-1-2 1-1-6 1-3-9 2-5-11 3-7-14 6-9-18 8-12-20
NC <10 <10 <10 <10 <10 13 18 26 33
CFM 50 75 125 200 300 375 450 600 800
Ps .001 .002 .006 .016 .037 .058 .083 .148 .263
Horizontal Pt .001 .003 .009 .024 .053 .083 .120 .213 .378
Throw 2-2-5 2-4-7 4-6-12 6-9-10 9-14-27 12-18-30 14-21-33 19-27-38 25-31-44
5' Length
NC <10 <10 <10 11 17 22 26 34 42
12" Inlet
Ps .001 .002 .005 .014 .030 .047 .068 .122 .216
Pt .001 .003 .008 .021 .047 .073 .105 .186 .331
Vertical
Throw 0-0-1 0-0-1 0-1-4 1-2-8 2-6-12 4-7-15 6-9-18 8-12-23 10-16-31
NC <10 <10 <10 <10 11 15 20 28 35
PHPS
MODEL PHPS/PHPSI THREE SLOT
CFM/LF 10 15 25 40 60 75 90 120 250
CFM 50 80 120 160 200 240 320 400 500
Ps .012 .030 .068 .121 .188 .271 .483 .754 1.178
Horizontal Pt .013 .034 .076 .136 .212 .305 .542 .847 1.324
Throw 4-6-12 6-9-15 9-13-19 12-15-21 14-17-24 15-19-26 18-21-30 20-24-34 22-27-38
2' Length
NC <10 <10 16 23 29 34 41 48 55
8" Inlet
Ps .009 .023 .052 .092 .144 .207 .368 .576 .900
Pt .010 .027 .060 .107 .167 .241 .428 .669 1.045
Vertical
Throw 0-1-3 1-2-7 2-4-11 3-7-15 5-9-18 7-11-21 10-15-25 12-18-27 15-22-31
NC <10 <10 11 20 26 31 36 40 46
CFM 100 160 240 320 400 480 640 800 1000
Ps .012 .030 .067 .118 .185 .266 .473 .739 1.155
Horizontal Pt .017 .044 .100 .178 .278 .400 .712 1.112 1.737
1/2" Slot Width
Throw 4-6-12 6-9-19 9-14-26 13-19--30 16-24-34 19-26-37 25-30-43 28-34-48 31-38-54
4' Length
NC <10 11 19 26 32 37 44 51 58
8" Inlet
Ps .009 .023 .051 .090 .141 .203 .361 .564 .882
Pt .015 .037 .084 .150 .234 .337 .600 .937 1.464
Vertical
Throw 0-1-4 1-3-10 3-6-15 4-10-21 7-13-26 10-15-30 14-21-35 17-26-39 21-31-43
NC <10 <10 14 23 29 34 39 43 49
CFM 125 200 300 400 500 600 800 1000 1250
Ps .011 .029 .065 .116 .181 .261 .464 .724 1.132
Horizontal Pt .016 .041 .092 .163 .255 .368 .654 1.021 1.596
Throw 4-6-13 7-10-20 10-15-29 13-20-34 17-25-38 20-29-42 27-34-48 31-38-54 35-42-60
5' Length
NC <10 13 21 28 34 39 46 53 60
10" Inlet
Ps .009 .022 .050 .089 .138 .199 .354 .553 .864
Pt .013 .034 .077 .136 .213 .306 .544 .850 1.328
Vertical
Throw 1-1-5 1-3-12 3-7-18 6-12-24 9-15-30 12-18-34 16-24-39 21-31-43 25-34-49
PLENUM SLOT
NC <10 <10 16 25 31 36 41 45 51
DIFFUSERS
CFM 50 80 120 160 200 240 320 400 500
Ps .008 .022 .049 .087 .135 .195 .346 .541 .845
Horizontal Pt .010 .025 .057 .101 .159 .228 .406 .634 .991
Throw 3-5-9 5-8-15 8-11-19 10-15-21 13-17-24 15-19-26 18-21-30 20-24-34 22-27-38
2' Length
NC <10 <10 <10 18 23 27 34 40 45
8" Inlet
Ps .006 .016 .037 .066 .103 .148 .263 .411 .643
Pt .008 .020 .045 .081 .126 .182 .323 .504 .788
Vertical
Throw 0-0-2 1-1-5 1-3-9 2-5-13 3-7-16 5-9-19 8-13-25 10-16-27 13-20-31
NC <10 <10 <10 18 26 33 41 47 53
CFM 100 160 240 320 400 480 640 800 1000
Ps .008 .021 .048 .085 .133 .191 .339 .530 .829

Horizontal Pt .011 .029 .065 .115 .180 .259 .461 .720 1.126
ADJUSTABLE PATTERN
3/4" Slot Width
Throw 5-7-15 8-12-21 12-18-26 16-21-30 10-24-34 21-26-37 25-30-43 28-34-48 31-38-54
4' Length
NC <10 <10 15 21 26 30 37 43 48
CONTROLLERS
10" Inlet
Ps .006 .016 .036 .065 .101 .145 .258 .403 .630
Pt .009 .024 .053 .095 .148 .214 .380 .593 .927
Vertical
Throw 1-2-7 2-5-13 5-10-19 8-13-25 11-16-27 13-19-30 17-25-35 21-27-39 25-31-43
NC <10 <10 11 21 29 36 44 50 56
CFM 125 200 300 400 500 600 800 1000 1250
Ps .008 .021 .047 .083 .130 .187 .333 .520 .812
Horizontal Pt .013 .033 .074 .131 .204 .294 .523 .817 1.276
Throw 6-8-17 9-13-24 13-20-29 18-24-34 22-27-38 24-29-42 28-34-48 31-38-54 35-42-60
5' Length
NC <10 10 17 23 28 32 39 45 50
10" Inlet
Ps .006 .016 .036 .063 .099 .142 .253 .395 .617
Pt .011 .028 .062 .111 .173 .249 .443 .692 1.081
Vertical
Throw 1-3-10 3-7-16 7-12-23 10-16-27 13-19-31 16-23-34 21-27-39 25-31-43 28-34-49
NC <10 <10 13 23 31 38 46 52 58
PHPS

MODEL PHPS/PHPSI THREE SLOT
CFM/LF 10 15 25 40 60 75 90 120 250
CFM 50 80 120 160 200 240 320 400 500
Ps .005 .013 .029 .052 .081 .117 .208 .325 .507
Horizontal Pt .006 .015 .033 .060 .093 .134 .238 .372 .581
Throw 3-4-8 4-7-13 7-10-19 9-13-21 11-16-24 13-19-26 17-21-30 20-24-34 22-27-38
2' Length
NC <10 <10 <10 17 25 31 39 46 54
10" Inlet
Ps .004 .010 .022 .039 .062 .089 .158 .247 .386
Pt .005 .012 .026 .047 .074 .106 .188 .294 .460
Vertical
Throw 0-0-2 0-1-4 1-2-7 2-4-9 3-6-11 4-7-14 6-9-18 8-11-23 10-14-29
NC <10 <10 <10 14 21 27 35 41 45
CFM 100 160 240 320 400 480 640 800 1000
Ps .005 .013 .029 .051 .080 .115 .204 .318 .497
Horizontal Pt .008 .020 .046 .081 .127 .183 .325 .508 .794
1" Slot Width
Throw 3-5-10 5-8-16 8-12-24 11-16-30 13-20-34 16-24-37 21-30-43 27-34-48 31-38-54
4' Length
NC <10 <10 11 20 28 34 42 49 57
10" Inlet
Ps .004 .010 .022 .039 .060 .087 .155 .242 .378
Pt .007 .017 .039 .069 .108 .156 .276 .432 .675
Vertical
Throw 0-1-3 1-2-7 2-4-11 3-7-14 5-9-18 7-11-21 9-14-28 12-18-36 15-22-43
NC <10 <10 <10 17 24 30 38 44 48
CFM 125 200 300 400 500 600 800 1000 1250
Ps .005 .012 .028 .050 .078 .112 .200 .312 .487
Horizontal Pt .008 .020 .044 .079 .123 .177 .315 .492 .768
Throw 4-6-11 6-9-18 9-13-26 12-18-34 15-22-38 18-26-42 24-34-48 29-38-54 35-42-60
5' Length
NC <10 <10 13 22 30 36 44 51 59
12" Inlet
Ps .004 .009 .021 .038 .059 .085 .152 .237 .370
Pt .007 .017 .038 .067 .104 .150 .267 .417 .651
Vertical
Throw 1-1-5 1-3-9 3-7-14 6-9-19 8-12-24 9-14-28 13-19-38 16-24-43 20-29-49
PLENUM SLOT
NC <10 <10 12 19 26 32 40 46 50
DIFFUSERS
CFM 50 80 120 160 200 240 320 400 500

Ps .003 .006 .015 .026 .041 .058 .104 .162 .254
Horizontal Pt .003 .008 .019 .034 .052 .076 .134 .210 .328
Throw 2-3-6 3-5-10 5-7-15 7-10-20 8-12-24 10-15-26 13-20-30 16-24-34 21-27-38
2' Length
NC <10 <10 <10 11 15 19 27 33 40
10" Inlet
Ps .002 .005 .011 .020 .031 .044 .079 .123 .193
Pt .003 .007 .015 .027 .043 .062 .109 .171 .267
Vertical
Throw 0-0-1 0-1-3 1-2-4 1-3-6 2-4-7 3-4-9 4-6-12 5-7-15 6-9-10
NC <10 <10 <10 <10 <10 <10 16 20 24
CFM 100 160 240 320 400 480 640 800 1000
Ps .002 .006 .014 .025 .040 .057 .102 .159 .249
Horizontal
1 1/2" Slot Width
Pt .004 .011 .025 .044 .069 .099 .175 .274 .428

ADJUSTABLE PATTERN
Throw 2-3-7 4-5-11 5-8-16 7-11-22 9-14-27 11-16-32 14-22-43 18-27-48 23-34-50
4' Length
NC <10 <10 <10 14 18 22 30 36 43
CONTROLLERS
12" Inlet
Ps .002 .005 .011 .019 .030 .044 .077 .121 .189
Pt .004 .009 .021 .038 .059 .085 .151 .236 .369
Vertical
Throw 0-0-2 1-1-4 1-3-6 2-4-9 3-5-11 4-6-13 6-9-17 7-11-22 9-14-27
NC <10 <10 <10 <10 <10 13 19 23 27
CFM 125 200 300 400 500 600 800 1000 1250
Ps .002 .006 .014 .025 .039 .056 .100 .156 .244
Horizontal Pt .005 .013 .030 .054 .084 .121 .215 .336 .524
Throw 3-4-9 5-7-14 7-11-22 10-14-29 12-18-36 14-22-42 19-29-48 24-36-54 30-42-60
5' Length
NC <10 <10 12 16 20 24 32 38 45
12" Inlet
Ps .002 .005 .0111 .019 .030 .043 .076 .119 .185
Pt .005 .012 .027 .048 .075 .107 .191 .298 .466
Vertical
Throw 0-1-3 1-2-6 2-4-9 4-6-11 5-7-14 6-9-17 8-11-23 9-14-28 12-18-35
NC <10 <10 <10 <10 11 15 21 25 29
PHPS
MODEL PHPS/PHPSI FOUR SLOT
CFM/LF 10 15 25 40 60 75 90 120 300
CFM 100 150 160 200 300 350 400 500 -
Ps .033 .074 .084 .131 .295 .401 .524 .819 -
Horizontal Pt .039 .087 .099 .154 .347 .473 .617 .965 -
Throw 9-12-16 12-14-20 12-15-21 13-16-23 16-20-28 18-22-30 19-23-33 21-26-36 -
2' Length
NC <10 15 17 23 35 39 42 48 -
8" Inlet
Ps .029 .066 .075 .117 .262 .357 .466 .729 -
Pt .035 .079 .090 .140 .315 .428 .559 .874 -
Vertical
Throw 1-2-8 2-5-12 2-5-12 4-8-16 8-12-20 9-14-21 10-16-23 13-18-25 -
NC <10 12 13 20 32 36 39 44 -
CFM 200 300 320 400 600 700 800 1000 -
Ps .032 .072 .082 .129 .289 .394 .514 .803 -
Horizontal Pt .044 .099 .113 .176 .396 .539 .704 1.100 -
1/2" Slot Width
Throw 12-16-23 16-20-28 17-21-29 19-23-33 23-28-40 25-30-43 27-33-46 30-36-51 -

4' Length
NC <10 18 20 26 38 42 45 51 -
10" Inlet
Ps .029 .064 .073 .114 .257 .350 .457 .714 -
Pt .040 .091 .104 .162 .364 .496 .647 1.011 -
Vertical
Throw 1-3-11 3-7-16 3-8-17 5-11-22 11-16-28 13-19-30 15-22-32 18-25-36 -
NC <10 15 16 23 35 39 42 47 -
CFM 250 375 400 500 750 875 1000 1250 -
Ps .031 .071 .081 .126 .283 .386 .504 .787 -
Horizontal Pt .050 .113 .128 .200 .450 .613 .801 1.251 -
Throw 13-18-26 18-22-31 19-23-33 21-26-36 26-31-45 28-34-48 30-36-51 33-41-58 -
5' Length
NC 11 20 22 28 40 44 47 53 -
10" Inlet
Ps .028 .063 .072 .112 .252 .343 .448 .700 -
Pt .047 .105 .119 .186 .419 .570 .745 1.164 -
Vertical
Throw 2-4-13 4-9-19 4-10-21 7-13-25 13-19-31 15-22-33 17-25-36 21-28-40 -
PLENUM SLOT
NC 12 17 18 25 37 41 44 49 -
DIFFUSERS
CFM 100 150 160 200 300 350 400 500 600
Ps .025 .057 .065 .101 .228 .311 .406 .634 .913
Horizontal Pt .031 .070 .080 .125 .281 .382 .499 .780 1.123
Throw 9-12-16 12-14-20 12-15-21 13-16-23 16-20-28 18-22-30 19-23-33 21-26-36 23-28-40
2' Length
NC <10 <10 <10 18 29 33 36 42 46
8" Inlet
Ps .025 .057 .065 .101 .227 .310 .404 .63 .910
Pt .031 .070 .080 .124 .280 .381 .498 .777 1.119
Vertical
Throw 1-1-5 1-3-10 2-3-11 2-5-13 5-10-20 7-12-21 9-13-23 11-17-25 13-20-28
NC <10 <10 <10 16 29 33 37 41 44
CFM 200 300 320 400 600 700 800 1000 1200
Ps .025 .056 .064 .099 .224 .305 .398 .622 .895

Horizontal Pt .037 .083 .094 .147 .331 .450 .588 .919 1.323
ADJUSTABLE PATTERN
3/4" Slot Width
Throw 6-12-23 12-19-28 13-20-29 17-23-33 23-28-40 25-30-43 27-33-46 30-36-51 33-40-56
4' Length
NC <10 14 15 21 32 36 39 45 49
CONTROLLERS
10" Inlet
Ps .025 .056 .063 .099 .223 .304 .396 .620 .892
Pt .037 .082 .094 .147 .330 .449 .587 .917 1.320
Vertical
Throw 2-5-13 5-10-20 6-11-20 9-13-23 13-20-28 16-21-30 18-23-32 21-25-36 23-28-39
NC <10 10 12 19 32 36 40 44 47
CFM 250 375 400 500 750 875 1000 1250 1500
Ps .024 .055 .062 .097 .219 .299 .390 .609 .877
Horizontal Pt .043 .097 .110 .172 .386 .526 .687 1.073 1.546
Throw 15-18-26 18-22-31 19-23-33 21-26-36 26-31-45 28-34-48 30-36-51 33-41-58 36-45-63
5' Length
NC <10 16 17 23 34 38 41 47 51
10" Inlet
Ps .024 .055 .062 .097 .219 .297 .389 .607 .874
Pt .043 .096 .110 .171 .386 .525 .686 1.071 1.543
Vertical
Throw 4-8-16 8-12-22 9-13-23 11-16-25 16-22-31 19-24-33 21-25-36 23-28-40 25-31-44
NC <10 12 14 21 34 38 42 46 49
PHPS

MODEL PHPS/PHPSI FOUR SLOT
CFM/LF 10 15 25 40 60 75 90 120 300
CFM 100 150 160 200 300 350 400 500 600
Ps .017 .039 .045 .070 .157 .213 .279 .435 .627
Horizontal Pt .020 .046 .052 .082 .183 .250 .326 .510 .734
Throw 8-12-16 12-14-20 12-15-21 13-16-23 16-20-28 18-22-30 19-23-33 21-26-36 23-28-40
2' Length
NC <10 <10 <10 16 29 33 36 41 44
10" Inlet
Ps .017 .037 .042 .066 .149 .203 .265 .414 .596
Pt .020 .044 .050 .078 .176 .239 .312 .488 .703
Vertical
Throw 1-2-6 2-3-9 2-4-9 3-6-11 6-9-17 7-10-20 8-11-23 10-14-25 11-17-28
NC <10 <10 <10 13 26 31 34 39 43
CFM 200 300 320 400 600 700 800 1000 1200
Ps .017 .038 .044 .068 .154 .209 .273 .427 .615
Horizontal Pt .029 .065 .074 .116 .261 .355 .463 .724 1.042
1" Slot Width
Throw 11-16-23 16-20-28 17-21-29 19-23-33 23-28-40 25-30-43 27-33-46 30-36-51 33-40-56
4' Length
NC <10 11 13 19 32 36 39 44 47
10" Inlet
Ps .016 .037 .042 .065 .148 .199 .260 .406 .584
Pt .028 .063 .072 .112 .253 .344 .450 .703 1.012
Vertical
Throw 1-3-9 3-6-13 3-7-14 5-9-18 9-13-27 10-16-30 12-18-32 15-22-36 18-27-39
NC <10 <10 <10 16 29 34 37 42 46
CFM 250 375 400 500 750 875 1000 1250 1500
Ps .017 .038 .043 .067 .151 .205 .268 .418 .602
Horizontal Pt .028 .063 .072 .112 .252 .343 .447 .699 1.007
Throw 11-17-36 17-22-31 18-23-33 21-26-36 26-31-45 28-34-48 30-36-51 33-41-58 36-45-63
5' Length
NC <10 13 15 21 34 38 41 46 49
12" Inlet
Ps .016 .036 .041 .064 .143 .195 .254 .398 .572
Pt .027 .061 .069 .109 .244 .332 .434 .678 .977
Vertical
Throw 2-5-12 5-9-18 6-9-19 8-12-24 12-18-31 14-21-33 16-24-36 20-28-40 24-31-44
PLENUM SLOT
NC <10 10 12 18 31 36 39 44 46
DIFFUSERS
CFM 100 150 160 200 300 350 400 500 600
Ps .016 .037 .042 .066 .148 .202 .264 .41412 .593
Horizontal Pt .019 .044 .050 .078 .175 .238 .311 .486 .700
Throw 6-10-16 10-14-20 10-15-21 13-16-23 16-20-28 18-22-30 19-23-33 21-26-36 23-28-40
2' Length
NC <10 <10 <10 10 19 23 27 33 38
10" Inlet
Ps .012 .028 .032 .050 .112 .152 .198 .310 .446
Pt .015 .035 .039 .061 .138 .188 .246 .384 .553
Vertical
Throw 1-1-3 1-2-4 1-2-5 2-3-6 3-4-9 3-5-10 4-6-12 5-7-15 6-9-18
NC <10 <10 <10 <10 12 17 21 27 31
CFM 200 300 320 400 600 700 800 1000 1200
Ps .016 .036 .041 .065 .145 .198 .258 .404 .581
Horizontal
1 1/2" Slot Width
Pt .023 .053 .060 .093 .210 .286 .373 .583 .840

ADJUSTABLE PATTERN
Throw 4-8-21 8-16-28 10-17-29 14-21-33 21-28-40 25-30-43 27-33-46 30-36-51 33-40-56
4' Length
NC <10 <10 <10 13 22 26 30 36 41
CONTROLLERS
12" Inlet
Ps .012 .027 .031 .049 .109 .149 .194 .304 .437
Pt .019 .044 .050 .077 .174 .237 .309 .483 .696
Vertical
Throw 1-2-4 2-3-6 2-3-7 3-4-9 4-6-13 5-8-15 6-9-17 7-11-22 9-13-26
NC <10 <10 <10 <10 15 20 24 30 34
CFM 250 375 400 500 750 875 1000 1250 1500
Ps .016 .036 .041 .063 .142 .194 .253 .396 .570
Horizontal Pt .027 .061 .069 .108 .244 .331 .433 .676 .974
Throw 7-14-26 14-21-31 15-22-33 19-26-36 26-31-45 28-34-48 30-36-51 33-41-58 36-45-63
5' Length
NC <10 11 12 15 24 28 32 38 43
12" Inlet
Ps .012 .027 .030 .048 .107 .146 .191 .298 .429
Pt .023 .052 .059 .093 .208 .283 .370 .578 .833
Vertical
Throw 1-3-6 3-4-9 3-5-9 4-6-11 6-9-17 7-10-20 8-11-23 9-14-28 11-17-34
NC <10 <10 <10 <10 17 22 26 32 36
PHPS
PERFORMANCE NOTES FOR SERIES PHP
MODEL PHPS/PHPSI
DEFINITION OF UNITS
PLENUM SLOT
DIFFUSERS
ADJUSTABLE PATTERN
CONTROLLERS
PHPS

MODEL PHPS-IT
The PHPS-IT is designed with ice tong blades for
180 pattern control. The curved pattern controllers
produce a horizontal air pattern that hugs the ceiling.
They can also be set for vertical projection.
Submittal:
Galvanized steel construction
Plenum Slot Diffuser "Ice Tong" Blade Configuration
Available in 1 to 4 slots
Models: PHPS-IT-75-6 Plenum Slot Diffuser "Ice Tong" Blade 3/4" Slot Width T-Bar Lay-In Un-Insualted
Available lengths 24", 36", 48" Plenum
PHPSI-IT-75-6 and 60"Slot Diffuser "Ice Tong" Blade 3/4" Slot Width T-Bar Lay-In Insualted
PHPS-IT-10-6 Plenum Slot Diffuser "Ice Tong" Blade 1" Slot Width T-Bar Lay-In Un-Insualted
Pattern controllers allow 180 adjustment
PHPSI-IT-10-6 Plenum Slotof discharge
Diffuser direction
"Ice Tong" Blade 1" Slot Width T-Bar Lay-In Insualted
PHPS-IT-75-9 Submittal:
Plenum Slot Diffuser "Ice Tong" Blade 3/4" Slot Width Bolt Slot (Donn Fineline) Un-Insualted
Optional internal (fiberglass or Plenum
PHPSI-IT-75-9 closed cell)
Slot or external
Diffuser "Ice(foil
Tong"back) insulation
Blade 3/4" Slot Width Bolt Slot (Donn Fineline) Insualted
Plenum Slot Diffuser "Ice
PHPS-IT-10-9 Tong"
Plenum SlotBlade
DiffuserConfiguration
"Ice Tong" Blade 1" Slot Width Bolt Slot (Donn Fineline) Un-Insualted
Models:PHPSI-IT-10-9
PHPS-IT-75-6 PlenumSlot
Plenum Slot Diffuser
Diffuser "Ice"Ice Tong"
Tong" BladeBlade 1" Width
3/4" Slot Slot Width
T-Bar Bolt
Lay-InSlot (Donn Fineline) Insualted
Un-Insualted
PHPSI-IT-75-6 Plenum Slot Diffuser "Ice Tong" Blade 3/4" Slot Width T-Bar Lay-In Insualted
24 Gauge Galvanized Steel. ( 25 ) Finish All Exposed Surfaces Painted Black, Center Tees White
PHPS-IT-10-6 Plenum Slot Diffuser "Ice Tong" Blade 1" Slot Width T-Bar Lay-In Un-Insualted
PHPSI-IT-10-6 Plenum Slot Diffuser "Ice Tong" Blade 1" Slot Width T-Bar Lay-In Insualted
PHPS-IT-75-9 Plenum Slot Diffuser "Ice Tong" Blade 3/4" Slot Width Bolt Slot (Donn Fineline) Un-Insualted
PHPSI-IT-75-9 Plenum Slot Diffuser "Ice Tong" Blade 3/4" Slot Width Bolt Slot (Donn Fineline) Insulation
Insualted
PHPS-IT-10-9 (Optional)
Plenum Slot Diffuser "Ice Tong" Blade 1" Slot Width Bolt Slot (Donn Fineline) Un-Insualted
Available
PHPSI-IT-10-9 Plenum Slot Diffuser "Ice Tong" Blade 1" Slot Width Bolt Slot (Donn Fineline) Insualted
Sizes:
24 Gauge Galvanized Steel. ( 25 ) Finish All Exposed Surfaces Painted Black, Center Tees White 24"
11" 36"
48"
Insulation 60"
(Optional)
Available
Optional Sizes:
Damper 24"
11" 36"
48"
60"
CAC CA D AC CA D A D AC CA D A D A D AC
PLENUM SLOT
Optional
B B B B
Damper
DIFFUSERS
Tee Bar Clips Side Tee

C = 1/2" (Optional) (Optional)
CAC B Diffuser
C A DWidth
AC C A DD= A
1" D A C Tee
Center C A D Air
A Flow D AC
D A Options
B B B B
A Slot Width 1 Slot 2 Slot 3 Slot 4 Slot
Tee Bar Clips Side Tee
75 3/4" 1 3/4" 3 1/2"Lay-In
- 6 T-Bar 5 1/4"
Frame 7" C = 1/2" (Optional) (Optional)
D = 1" Center Tee Air Flow Options
10Inlet Size1"- See Options
2" 4" 6" 8" LEFT RIGHT VERTICAL
- 9 Bolt Slot ( Donn Fineline ) Frame
- 6 T-Bar Lay-In Frame Inlet Size - See Options
Inlet Size - See Options LEFT RIGHT VERTICAL
- 9 Bolt Slot ( Donn Fineline ) Frame
Inlet Size - See Options
ADJUSTABLE PATTERN
T-Bar Grid
CONTROLLERS
Nominal Size - 1/4"

T-Bar Grid
Nominal Size = T-Bar Grid Module Size Nominal Size - 1/4"
Nominal Size - 1/4"
Nominal Size = T-Bar Grid Module Size Nominal Size - 1/4"
1. Available
Notes: Finishes
(check if provided)2. Available Accessories 3. Available Options 4. Construction Details
Standard Finish: OBD - Steel Opposed Blade Damper Inlet Sizes:
PHPS-IT-75-6 Plenum2.Slot
Diffuser Ice Tong 3. Available
Blade - 3/4" SlotOptions
Width T-Bar Lay-In 4. Construction Details
Non-insulated
25 Black Finish:
Standard W/White Tees OBD - Steel Opposed Blade Damper Inlet Sizes: 6" Round
Optional 25
Finish:
Black W/White Tees 6" Round8" Oval
PHPSI-IT-75-6
Optional
26 Finish:
All White
Plenum Slot Diffuser Ice Tong Blade -8"3/4"
Oval Slot Width T-Bar Lay-In Insulated
10" Oval
26 All White 10" Oval12" Oval
PHPS-IT-10-6
27 All Black
27 All Black
Plenum Slot Diffuser Ice Tong Blade -12"
1"Insulation
Slot Width
Oval T-Bar Lay-In Non-insulated
Options:
Insulation Options:
STD - 1/2" Fiberglass Internal
PHPSI-IT-10-6 Plenum Slot Diffuser Ice Tong Blade -STD
1" -Slot Width T-Bar
1/2" Fiberglass Internal Lay-In Insulated
CC - Closed Cell Foam
CC - Closed Cell Foam
EI - Ins.
EI - External External Ins.Back
- 1/2" Foil - 1/2" Foil Back Fiberglass
Fiberglass
PHPS-IT-75-9 Plenum Slot Diffuser Ice Tong Blade - 3/4" Slot Width Bolt Slot (Donn Fineline) Non-insulated
PHPSI-IT-75-9
Revision:
Revision: AA Plenum11/2013
Date:
Date: Slot Diffuser Ice Tong Blade - 3/4" Slot Width
11/2013 BoltDimensions
Slot are
Dimensions (Donn
in Fineline)
are in Insulated
Inches Page:
Inches 1 ofPage:
1 1 of 1
Metal Industries, Inc. Clearwater, FL
PHPS-IT-10-9 Plenum Slot Diffuser Ice(727) 441 - 2651
Tong Blade - Fax (800) 865 8383
1" Slot Width Boltwww.metalaire.com [email protected]
Slot (Donn Fineline) Non-insulated
PHPSI-IT-10-9 Plenum Slot Diffuser Ice Tong Blade - 1" Slot Width Bolt Slot (Donn Fineline) Insulated
PHPS-IT
PHPS-IT SPECIFICATIONS
SUPPLY T-BAR LAY-IN SUPPLY DONN FINELINE/BOLT SLOT
INSULATED/NON-INSULATED CEILINGS INSULATED/NON-INSULATED
Plenum slot diffuser shall be METALAIRE PHPS-IT-6 Plenum slot diffuser shall be METALAIRE PHPS-IT-9 (non-
(non-insulated) or PHPSI-IT-6 (insulated). Plenum slot insulated) or PHPSI-IT-9 (insulated). Plenum slot diffusers
diffusers shall be of the sizes and mounting types as shall be of the sizes and mounting types as shown on the
shown on the device schedule. device schedule.
Diffusers shall have extruded aluminum ice tong Diffusers shall have extruded aluminum ice tong
deflector blades which produce a 180 air pattern. deflector blades which produce a 180 air pattern.
Units shall be adjustable from the slot opening to Units shall be adjustable from the slot opening to provide
provide horizontal to vertical air patterns. horizontal to vertical air patterns.
Inlets shall be round or oval, centrally located. Plenum Inlets shall be round or oval, centrally located. Plenum
diffusers shall be constructed of corrosion resistant diffusers shall be constructed of corrosion resistant
steel. Height of units shall be 11" or greater to maximize steel. Height of units shall be 11" or greater to maximize
diffuser performance. diffuser performance.
Units shall be available with 3/4" or 1" slot widths and Units shall be available with 3/4" or 1" slot widths and
be available with 1, 2, 3 or 4 independent supply slots. be available with 1, 2, 3 or 4 independent supply slots.
Diffuser face and air pattern controller shall be black. Diffuser face and air pattern controller shall be black.
Optional tees shall be white. Optional tees shall be white.
Insulated diffusers shall be Model PHPSI-IT. Insulation Insulated diffusers shall be Model PHPSI-IT. Insulation
shall be internal with optional external. shall be internal with optional external.
PLENUM SLOT
DIFFUSERS

ADJUSTABLE PATTERN
CONTROLLERS
PHPS-IT

PHP-IT MODEL NUMBER SPECIFICATION
Model Non-insulated # of Slots Slot Lengths Inlets Available Finishes
PHPS-IT-75-6 3/4" Slot Width 1 24" No Inlet Standard
PHPS-IT-10-6 1" Slot Width 2 36" 5" Round 25 White Tee / Black Border
PHPS-IT-75-9 3/4" Slot Width 3 48" 6" Round Optional
PHPS-IT-10-9 1" Slot Width 4 60" 7" Round 26 All White
10" Oval
12" Oval
Model Insulated # of Slots Slot Lengths Inlets Available Accessories

PHPSI-IT-75-6 3/4" Slot Width 1 24" No Inlet ID Inlet Damper
PHPSI-IT-10-6 1" Slot Width 2 36" 5" Round PHP-TBPF T-bar Plaster Frame
PHPSI-IT-75-9 3/4" Slot Width 3 48" 6" Round NB No Blades
PHPSI-IT-10-9 1" Slot Width 4 60" 7" Round EI External Insulation
8" Oval CC Closed Cell Insulation
10" Oval
12" Oval
Available Options
PLENUM SLOT
DIFFUSERS
ADJUSTABLE PATTERN
CONTROLLERS
PHPS-IT
MODEL PHPS-IT
CFM 30 50 70 90 110 130
2' Length Pt .017 .063 .131 .216 .323 .448
3/4" Width Horizontal
6" Inlet Throw 16 22 26 30 34 37
NC <20 21 29 35 39 43
CFM 50 70 90 110 130 150
2' Length Pt .032 .075 .125 .176 .262 .361
1" Width Horizontal
8" Inlet Throw 17 23 28 31 34 37
NC <20 24 29 34 38 41
1 Slot
CFM 50 80 110 140 170 200

4' Length Pt .018 .051 .095 .157 .238 .332
6" Inlet Throw 10 13 15 17 19 20
NC <20 21 28 34 38 42
CFM 50 80 110 140 170 200
4' Length Pt .011 .023 .043 .073 .112 .158
1" Width Horizontal
8" Inlet Throw 9 13 15 17 19 21
NC <20 <20 24 30 35 39
CFM 50 80 110 140 170 200
2' Length Pt .015 .041 .083 .142 .218 .312
6" Inlet Throw 16 27 33 39 43 47
NC <20 20 26 33 38 41
CFM 50 80 110 140 170 200
2' Length Pt .008 .019 .042 .072 .112 .160
1" Width Horizontal
8" Inlet Throw 12 21 30 37 41 45
NC <20 <20 23 28 34 38
2 Slot
CFM 100 140 180 220 260 300

4' Length Pt .020 .042 .073 .113 .160 .217
8" Inlet Throw 13 16 18 20 22 25
NC <20 <20 24 29 33 37
CFM 100 200 250 300 350 400
4' Length Pt .011 .053 .077 .118 .160 .202
1" Width Horizontal
10" Inlet Throw 13 19 22 25 27 29
PLENUM SLOT
NC <20 <20 21 25 32 37
DIFFUSERS
CFM 75 110 145 180 215 250
2' Length Pt .012 .037 .066 .103 .152 .202
8" Inlet Throw 16 26 35 41 46 50
NC <20 <20 23 28 33 38
CFM 75 120 165 210 255 300
2' Length Pt .007 .020 .043 .072 .110 .157
1" Width Horizontal
10" Inlet Throw 13 22 32 41 47 52
NC <20 <20 24 29 34 39
3 Slot
CFM 150 210 270 330 390 450

4' Length Pt .026 .048 .082 .124 .174 .241
10" Inlet Throw 17 20 23 25 27 29
NC <20 <20 25 29 33 38

CFM 150 210 270 330 390 450
4' Length Pt .010 .032 .057 .092 .132 .176
1" Width
10" Inlet
Horizontal
Throw 15 20 22 25 28 30 ADJUSTABLE PATTERN
NC <20 <20 25 30 34 38
CONTROLLERS
CFM 100 150 200 250 300 350

2' Length Pt .012 .038 .068 .112 .164 .227
10" Inlet Throw 14 17 20 22 25 27
NC <20 <20 26 31 35 39
CFM 100 150 200 250 300 350
2' Length Pt .010 .018 .037 .058 .098 .132
1" Width Horizontal
10" Inlet Throw 17 21 25 30 34 37
NC <20 <20 25 30 34 38
4 Slot
CFM 150 230 310 390 470 550

4' Length Pt .015 .048 .084 .128 .187 .273
10" Inlet Throw 17 20 23 26 29 32
NC <20 <20 22 27 32 35
CFM 200 290 380 470 560 650
4' Length Pt .016 .032 .054 .080 .120 .164
1" Width Horizontal
12" Inlet Throw 20 24 28 32 35 37
PHPS-IT
NC <20 <20 24 30 34 38

MODEL PHPS-IT
Performance data is based on tests performed at Donco Air Products and Intertek Testing Services (formerly ETL)
in accordance with ASHRAE 70-2006.
DEFINITION OF UNITS
Throw Distances in feet to terminal velocity of 50 fpm
Throw 1 and Throw 2 indicates number of slots throwing each direction on 3 slot, 2 way diffuser
PLENUM SLOT
DIFFUSERS
ADJUSTABLE PATTERN
CONTROLLERS
PHPS-IT
HIGH CAPACITY FIXED PATTERN
CONTROLLERS
Model PHCS designed to maximize air entrainment and minimize temperature

gradients along perimeter zones. It has an extruded, aerodynamically shaped
PLENUM SLOT
DIFFUSERS
deflection blade that minimizes pressure and noise and maximizes room
air mixing. PAGE 28
Model PHPS-J is designed with an aerodynamically curved control vane

which provides a draftless full range air pattern. It is an excellent choice for
variable volume. PAGE 35
Model PHPS-E features the same aerodynamically curved control vane used
in the J Series. It maintains an air pattern tight against the ceiling in constant

or variable air control systems. PAGE 39 PATTERN CONTROLLERS
HIGH CAPACITY FIXED

MODEL PHCS
The PHC is a high performance plenum slot diffuser
designed for maximizing comfort in perimeter zones. The
extruded curved blade pattern controller is aerodynamically
shaped to produce a tight horizontal discharge pattern
along the ceiling. With very high induction rates, the PHC is
engineered to maximize space comfort by minimizing space
temperature gradients.
Excellent selection for perimeter applications, especially in cold climates, because of its high induction ratio
Units available with optional down blow section
Available with integral return, a low cost and efficient solution to return air into the ceiling plenum
Optional insulation on PHCSI, PHCRI, PHCSI-DB and PHCRI-DB
PLENUM SLOT
DIFFUSERS
PATTERN CONTROLLERS
HIGH CAPACITY FIXED
L = Nominal Lengths Available Inlets

24 6, 8, 10, 12
36 6, 8, 10, 12
48 6, 8, 10, 12
60 6, 8, 10, 12
Inlet Size B C
6" Oval 3 15/16 7 1/8
8" Oval 3 15/16 10 3/8
10" Oval 3 15/16 13 3/8
PHCS
12" Oval 3 15/16 16 3/8
SERIES PHC SPECIFICATIONS
SUPPLY T-BAR LAY-IN FIXED CURVED SUPPLY CENTER DOWN BLOW
BLADE INSULATED/NON-INSULATED T-BAR LAY-IN FIXED CURVED BLADE
INSULATED/NON-INSULATED
Plenum slot supply diffusers shall be METALAIRE PHCS-6
(non-insulated) or PHCSI-6 (insulated). Plenum slot Plenum slot supply diffusers shall be METALAIRE PHCS-
diffusers shall be of the sizes and mounting types as DB-6 (non-insulated) or PHCSI-DB-6 (insulated). Plenum
shown on the device schedule. slot diffusers shall be of the sizes and mounting types as
shown on the device schedule.
Units shall have an aerodynamically shaped extruded
aluminum curved blade deflector that provides a 1-way Plenum diffusers shall include a fixed curved blade supply
horizontal discharge pattern. air section and a center down-blow section. The supply
section shall have an aerodynamically shaped extruded
Inlets shall be centrally located, with a minimum depth of
aluminum curved blade deflector that provides a 1-way
2 1/8" for ease of duct connection. For straightness and
horizontal discharge pattern.
rigidity, plenums shall be fabricated using a two piece
panel construction and have a double metal thickness Plenum slot diffusers shall include an integral adjustable
hem at the face. Units fabricated using single wrapper center down-blow section that provides a vertical jet of
construction are not acceptable. Plenum diffusers shall supply air. Volume and direction of discharge air through
be constructed of corrosion resistant galvanized steel. center down-blow section shall be adjustable through the
face of the diffuser.
Diffuser face and air pattern controller shall be black.
Insulated diffusers shall be model PHCSI-6. Insulation
Inlets shall be centrally located, with a minimum depth of
2 1/8" for ease of duct connection. For straightness and
shall be internal.
RETURN T-BAR LAY-IN FIXED CURVED panel construction and have a double metal thickness
BLADE INSULATED/NON-INSULATED hem at the face. Units fabricated using single wrapper
Plenum slot return diffusers shall be METALAIRE PHCR-6 construction are not acceptable. Plenum diffusers shall
PLENUM SLOT
(non-insulated) or PHCRI-6 (insulated). Plenum slot be constructed of corrosion resistant galvanized steel.
DIFFUSERS
diffusers shall be of the sizes and mounting types as Diffuser face and air pattern controller shall be black.
shown on the device schedule.
Insulated diffusers shall be model PHCSI-DB-6.
Plenum diffusers shall include a fixed curved blade supply Supply section insulation shall be internal.
air section and an integral plenum return section.
RETURN CENTER DOWN BLOW
The supply section shall have an aerodynamically shaped T-BAR LAY-IN FIXED CURVED BLADE
extruded aluminum curved blade deflector that provides a INSULATED/NON-INSULATED
one way horizontal discharge pattern. Plenum slot return diffusers shall be METALAIRE PHCR-
Unit shall have an integral plenum return section DB-6 (non-insulated) or PHCRI-DB-6 (insulated). Plenum

designed for plenum return applications. Return section slot diffusers shall be of the sizes and mounting types as PATTERN CONTROLLERS
shall include a light shield to minimize reflective light shown on the device schedule. HIGH CAPACITY FIXED
coming through the slot opening. Plenum diffusers shall include a supply air section, a
Inlets shall be centrally located with a minimum depth of center down-blow section, and an integral plenum return
2 1/8" for ease of duct connection. For straightness and section. The supply section shall have an aerodynamically
rigidity, plenums shall be fabricated using a two piece shaped extruded aluminum curved blade deflector that
panel construction and have a double metal thickness provides a 1-way horizontal discharge pattern. Plenum
hem at the face. Units fabricated using single wrapper slot diffuser shall include an integral adjustable center
construction are not acceptable. down-blow section that provides a vertical jet of supply
Plenum diffusers shall be constructed of corrosion air. Volume and direction of discharge air through center
resistant galvanized steel. down-blow section shall be adjustable through the face
of the diffuser. Unit shall also have an integral plenum
return section designed for plenum return applications.
Insulated diffusers shall be model PHCRI-6. Supply
PHCS
section insulation shall be internal.

Return section shall include a light shield to minimize Performance Specification
reflective light coming through the slot opening. The manufacturer shall provide published performance
Inlets shall be centrally located, with a minimum depth of data. Data shall be tested in accordance to ANSI/ASHRAE
2 1/8" for ease of duct connection. For straightness and Standard 70-2006.
panel construction and have a double metal thickness
hem at the face. Units fabricated using single wrapper
construction are not acceptable. Plenum diffusers shall
be constructed of corrosion resistant galvanized steel.
Insulated diffusers shall be model PHCRI-DB-6.
Supply section insulation shall be internal.
PHC MODEL NUMBER SPECIFICATION

HIGH CAPACITY FIXED CURVED BLADE
Supply Inlets Slot Lengths Available Finishes
PHCS-6 Non-insulated No Inlet 24" Standard
PHCSI-6 Insulated 6" Round 36" 27 All Black
Center Down Blow Section 8" Oval 48"
PHCS-DB-6 Non-insulated 10" Oval 60" Available Accessories
PLENUM SLOT
PHCSI-DB-6 Insulated 12" Oval LQ Locking Quadrant Damper

DIFFUSERS
14" Oval
Return Inlets Slot Lengths Available Accessories

PHCR-6 Non-insulated No Inlet 24" EI External Insulation
PHCRI-6 Insulated 6" Round 36" CC Closed Cell Insulation
Center Down Blow Section 8" Oval 48"
PHCR-DB-6 Non-insulated 10" Oval 60"
PHCRI-DB-6 Insulated 12" Oval
PATTERN CONTROLLERS
14" Oval
HIGH CAPACITY FIXED

PHCS
SERIES PHCS PERFORMANCE DATA
MODEL PHCS/PHCSI
CFM/LF 20 30 40 50 60 80 90 100 110
CFM 40 60 80 100 120 160 180 200 -
Ps .010 .022 .040 .062 .089 .159 .201 .248 -
2'
Pt .013 .028 .050 .078 .113 .200 .254 .313 -
Length
Throw 1-2-7 2-5-11 4-7-14 6-9-18 7-11-19 10-14--22 11-16-24 12-18-25 -
NC <15 17 21 26 31 39 44 48 -
CFM 60 90 120 150 180 240 270 300 -
Ps .013 .029 .052 .081 .117 .208 .263 .324 -
3'
Pt .019 .042 .075 .117 .169 .301 .381 .470 -
Length
Throw 1-3-7 3-5-11 5-7-14 6-9-18 7-11-22 10-14-27 11-16-28 12-18-30 -
6" Round Inlet
NC <15 <15 16 22 27 36 41 46 -
CFM 80 120 160 200 240 320 360 400 440
Ps .015 .033 .059 .092 .132 .235 .298 .368 .445
4'
Pt .025 .056 .100 .157 .226 .401 .507 .626 .758
Length
Throw 2-5-10 5-7-14 6-10-19 8-12-24 10-14-37 13-19-31 14-22-33 16-24-35 18-26-36
NC <15 <15 <15 19 25 35 40 44 49
CFM 100 150 200 250 300 400 450 500 -
Ps .015 .034 .061 .095 .137 .243 .308 .380 -
5'
Pt .031 .071 .125 .196 .262 .502 .635 .784 -
Length
Throw 4-6-12 6-9-18 8-12-24 10-15-27 12-18-30 16-24-35 118-26-37 20-27-39 -
PLENUM SLOT
NC <15 <15 16 21 27 36 41 45 -
DIFFUSERS
CFM 40 60 80 100 120 160 180 200 -
Ps .006 .014 .026 .040 .058 .103 .130 .161 -
2'
Pt .007 .017 .029 .046 .066 .118 .149 .184 -
Length
Throw 0-1-3 1-2-5 2-3-7 3-4-8 3-5-10 5-7-14 5-8-15 6-8-16 -
NC <15 <15 19 24 28 37 41 46 -
CFM 60 90 120 150 180 240 270 300 330
Ps .009 .020 .036 .056 .081 .143 .181 .224 .271
3'
Pt .011 .025 .044 .069 .099 .177 .224 .276 .334
Length

Throw 1-2-5 2-4-8 3-5-10 4-6-13 5-8-15 7-10-18 8-11-19 8-13-20 9-14-21 PATTERN CONTROLLERS
HIGH CAPACITY FIXED
8" Oval Inlet
NC <15 <15 <15 20 25 35 39 44 49

CFM 80 120 160 200 240 320 360 400 440
Ps .011 .025 .044 .069 .099 .176 .223 .275 .333
4'
Pt .015 .033 .059 .092 .133 .236 .299 .369 .446
Length
Throw 2-3-7 3-5-10 5-7-14 6-8-16 7-10-18 9-14-20 10-15-21 11-16-23 12-17-24
NC <15 <15 <15 18 23 33 38 43 48
CFM 100 150 200 250 300 400 450 500 550
Ps .013 .028 .050 .079 .113 .201 .255 .314 .380
5'
Pt .018 .041 .074 .115 .166 .294 .373 .460 .557
Length
Throw 3-4-8 4-6-13 6-8-16 7-11-18 8-13-20 11-16-23 13-17-24 14-18-25 15-19-27
NC <15 <15 <15 20 26 35 38 42 46
PHCS

MODEL PHCS/PHCSI
CFM/LF 20 30 40 50 60 80 90 100 110 120
CFM 60 90 120 150 180 240 270 300 330 360
Ps .008 .017 .030 .047 .068 .120 .152 .188 .227 .270
3'
Pt .009 .019 .034 .054 .077 .137 .174 .214 .260 .309
Length
Throw 1-2-5 2-4-8 3-5-10 4-6-13 5-8-14 7-10-16 8-11-17 8-13-18 9-14-19 10-14-20
NC <15 <15 <15 17 22 31 36 40 45 50
CFM 80 120 160 200 240 320 360 400 440 480
10" Oval Inlet
Ps .010 .021 .038 .060 .086 .153 .193 .239 .289 .344
4'
Pt .011 .026 .046 .072 .103 .183 .232 .286 .346 .412
Length
Throw 2-3-7 3-5-10 5-7-13 6-8-15 7-10-16 9-13-19 10-14-20 11-15-21 13-16-22 13-16-23
NC <15 <15 <15 <15 20 30 35 39 44 48
CFM 100 150 200 250 300 400 450 500 550 600
Ps .011 .024 .043 .068 .097 .173 .219 .271 .328 .390
5'
Pt .014 .031 .055 .086 .124 .221 .279 .345 .417 .497
Length
Throw 3-4-8 4-6-13 6-8-15 7-11-17 8-13-18 11-15-21 13-16-23 14-17-24 14-18-25 15-18-26
NC <15 <15 <15 17 23 32 36 40 43 47
CFM 80 120 160 200 240 320 360 400 440 480
Ps .008 .019 .033 .052 .075 .134 .170 .209 .253 .301
4'
Pt .010 .021 .038 .060 .086 .152 .193 .238 .288 .343
Length
Throw 2-3-6 3-5-10 4-6-13 5-8-15 6-10-16 8-13-19 10-14-20 11-15-21 12-16-22 13-16-23
12" Oval Inlet
PLENUM SLOT
NC <15 <15 <15 <15 18 28 33 37 42 46

DIFFUSERS
CFM 100 150 200 250 300 400 450 500 550 600
Ps .010 .023 .040 .063 .091 .162 .205 .253 .306 .364
5'
Pt .012 .027 .048 .074 .107 .190 .241 .298 .360 .428
Length
Throw 3-4-8 4-6-12 5-8-15 7-10-17 8-12-18 11-15-21 12-16-22 13-17-23 14-17-25 15-18-26
NC <15 <15 <15 16 21 30 34 38 41 45

MODEL PHCS/PHCSI

PATTERN CONTROLLERS
HIGH CAPACITY FIXED
DEFINITION OF UNITS
PHCS
MODEL PHCS/PHCSI-DB
CFM/LF 20 30 40 50 60 70 80 90 100
CFM 60 90 120 150 180 210 240 270 -
Ps .049 .111 .198 .309 .445 .606 .791 1.001 -
3' Pt .055 .124 .221 .345 .497 .677 .884 1.119 -

Length Throw H 1-3-9 3-7-13 6-9-18 7-11-22 9-13-25 10-16-27 12-18-28 13-20-30 -
Throw V 1-1-2 1-2-4 2-2-5 2-3-6 2-4-6 3-4-6 3-5-7 4-5-7 -
NC 19 23 28 32 36 40 44 47 -
12" x 7/16" Down Blow Slot
CFM 80 120 160 200 240 280 320 360 -

Ps .052 .116 .207 .323 .465 .633 .827 1.047 -
6" Round Inlet
4' Pt .062 .140 .248 .388 .558 .760 .993 1.256 -

Length Throw H 2-6-12 6-9-18 8-12-23 10-25-26 12-18-28 14-21-31 16-23-33 18-25-35 -
Throw V 1-2-3 2-2-5 2-3-6 3-4-6 3-5-7 4-5-7 4-5-8 5-6-8 -
NC <15 21 27 33 37 42 46 49 -
CFM 100 150 200 250 300 350 400 450 -
Ps .020 .046 .081 .127 .183 .249 .325 .412 -
5' Pt .037 .082 .146 .228 .329 .447 .584 .739 -

Length Throw H 4-7-15 7-11-22 10-15-26 12-19-29 15-22-32 17-24-34 20-26-37 22-28-39 -
Throw V 1-2-4 2-3-5 3-4-6 3-5-7 4-5-7 5-6-8 5-6-8 5-6-9 -
NC <15 <15 20 27 34 39 44 49 -
CFM 60 90 120 150 180 210 240 270 300
PLENUM SLOT
Ps .031 .069 .122 .191 .275 .375 .489 .619 .764
DIFFUSERS
3' Pt .033 .074 .131 .204 .294 .400 .523 .662 .817
Length Throw H 1-3-9 3-6-13 6-9-16 7-11-18 9-13-20 10-15-22 11-16-23 13-17-24 14-18-26
Throw V 1-1-2 1-2-3 1-2-4 2-3-4 2-3-5 2-4-5 3-4-5 3-4-6 3-4-6
NC 15 20 24 28 33 37 40 44 47
CFM 80 120 160 200 240 280 320 360 400

Ps .018 .040 .071 .111 .160 .218 .285 .360 .445
8" Oval Inlet
4' Pt .022 .048 .086 .134 .194 .264 .344 .436 .538
Length Throw H 2-6-11 6-9-16 8-11-19 9-14-21 11-16-23 13-18-25 15-19-27 16-20-28 17-21-30

Throw V 1-1-3 1-2-4 2-3-4 2-3-6 3-4-5 3-4-6 4-4-6 4-5-7 4-5-7
ADJUSTABLE PATTERN
NC <15 17 23 29 33 37 41 45 49
CONTROLLERS
CFM 100 150 200 250 300 350 400 450 500
Ps .016 .035 .063 .098 .141 .192 .251 .317 .391
5' Pt .021 .048 .086 .134 .193 .263 .344 .435 .537
Length Throw H 4-7-14 7-11-18 9-14-21 12-17-23 14-18-26 16-20-28 17-21-30 18-22-32 19-23-33
Throw V 1-2-3 2-3-4 2-3-5 3-4-6 3-4-6 4-5-7 4-5-7 4-5-8 5-6-8
NC <15 <15 15 23 29 35 40 44 47
PHCS

MODEL PHCS/PHCSI-DB
CFM/LF 20 30 40 50 60 70 80 90 100 110
CFM 60 90 120 150 180 210 240 270 300 330
Ps .015 .034 .060 .094 .136 .185 .241 .305 .377 .456
3' Pt .016 .036 .065 .101 .145 .198 .258 .327 .404 .488
Length Throw H 1-2-6 2-4-8 3-6-11 5-7-14 6-8-17 7-10-19 8-11-21 8-13-22 9-14-23 10-16-24
Throw V 1-1-2 1-1-2 1-2-3 1-2-4 2-2-4 2-3-5 2-3-5 2-4-5 3-4-5 3-4-6
NC <15 16 21 25 29 33 37 41 44 47
CFM 80 120 160 200 240 280 320 360 400 440
Ps .015 .034 060 .093 .134 .182 .238 .302 .372 .451
10" Oval Inlet
4' Pt .017 .038 .067 .105 .151 .206 .269 .340 .420 .508
Length Throw H 1-3-8 3-6-11 5-8-15 6-9-19 8-11-21 9-13-22 10-15-24 11-17-25 13-19-27 14-20-28
Throw V 1-1-2 1-2-3 1-2-4 2-3-4 2-3-5 3-4-5 3-4-6 3-4-6 4-4-6 4-5-7
NC <15 <15 20 25 30 34 38 41 45 49
CFM 100 150 200 250 300 350 400 450 500 -
Ps .014 .031 .055 .086 .124 .169 .221 .280 .345 -
5' Pt .017 .038 .067 .105 .151 .206 .269 .340 .420 -
Length Throw H 2-5-9 5-7-14 6-9-19 8-12-21 9-14-23 11-16-25 13-19-27 14-20-29 16-21-30 -
Throw V 1-1-3 1-2-4 2-3-4 2-3-5 3-4-5 3-4-6 4-4-6 4-5-7 4-5-7 -
NC <15 <15 <15 21 28 34 39 43 47 -
CFM 80 120 160 200 240 280 320 360 400 440
Ps .013 .029 .051 .080 .115 .157 .205 .259 .320 .387
4' Pt .014 .031 .056 .087 .126 .171 .223 .282 .349 .422
PLENUM SLOT
DIFFUSERS
Length
12" Oval Inlet 12" x 7/16"
Throw H 1-3-7 3-5-11 5-7-14 6-9-18 7-11-20 8-12-22 10-14-23 11-16-25 12-18-26 13-19-27
Throw V 1-1-2 1-2-3 1-2-4 2-3-4 2-3-5 3-4-5 3-4-6 3-4-6 4-4-6 4-5-7
Down Blow Slot
NC <15 <15 18 24 28 32 36 40 43 47
CFM 100 150 200 250 300 350 400 450 500 550
Ps .012 .027 .049 .076 .109 .149 .194 .246 .303 .367
5' Pt .014 .031 .056 .087 .125 .171 .223 .282 348 .421
Length Throw H 2-4-9 4-7-13 6-9-18 7-11-21 9-13-23 10-16-24 12-18-24 13-20-28 15-21-29 16-22-31
Throw V 1-1-3 1-2-4 2-3-4 2-3-5 3-4-5 3-4-6 4-4-6 4-5-7 4-5-7 4-5-7
NC <15 <15 <15 19 26 32 36 41 45 49
ADJUSTABLE PATTERN

MODEL PHCS/PHCSI-DB
CONTROLLERS
DEFINITION OF UNITS
PHCS
MODEL PHPS-J
The PHPS-J is a high capacity diffuser with fixed
PHPSJ aerodynamic
ProductDescription
control vanes. The fixed vanes provide
ThePHPSJisahighcapacitydiffuserwithfixed
a full range of air flow. It is an excellent choice for
aerodynamiccontrolvanes.Thefixedvanesprovide
variable volume systems. The pattern controllers are
afullrangeofairflow.Itisanexcellentchoicefor
integral with the diffuser and can be fixed in a one
variablevolumesystems.Thepatterncontrollers
way or two way air pattern.
areintegralwiththediffuserandcanbefixedina
Corrosion resistant steel construction
PHPSJ ProductDescription
onewayortwowayairpattern.
ThePHPSJisahighcapacitydiffuserwithfixed
Lower flanges provide tile support as an integral part of the diffuser housing
Corrosionresistantsteelconstruction
aerodynamiccontrolvanes.Thefixedvanesprovide
Available in 1 to 4 slots
Lowerflangesprovidetilesupportasanintegral
afullrangeofairflow.Itisanexcellentchoicefor
Available lengthsvariablevolumesystems.Thepatterncontrollers
24", 36", 48" and 60"
partofthediffuserhousing
areintegralwiththediffuserandcanbefixedina
Availablein1to4slots
Optional insulation on PHPSI-J
onewayortwowayairpattern.
Availablelengths24,36,48and60
Corrosionresistantsteelconstruction
OptionalinsulationonPHPSIJ
PHPS-J11-6 One 1Lowerflangesprovidetilesupportasanintegral
Slot Way Non-insulated PHPSI-J11-6 One Slot 1 Way Insulated
PHPS-J21-6
partofthediffuserhousing
Two Slot 1 Way Non-insulated PHPSI-J21-6 Two Slot 1 Way Insulated
Availablein1to4slots
PHPS-J22-6 Two Slot
2Availablelengths24,36,48and60
Way Non-insulated PHPSI-J22-6 Two Slot 2 Way Insulated
PHPS-J31-6 ThreeSlotOptionalinsulationonPHPSIJ
1 Way Non-insulated PHPSI-J31-6 Three Slot 1 Way Insulated
PHPS-J31-6 Three Slot 2 Way Non-insulated PHPSI-J31-6 Three Slot 2 Way Insulated
PHPS-J41-6 Four Slot 1 Way Non-insulated PHPSI-J41-6 Four Slot 1 Way Insulated
PHPS-J42-6 Four Slot 2 Way Non-insulated PHPSI-J42-6 Four Slot 2 Way Insulated
PLENUM SLOT
DIFFUSERS
LOW REZ
Model W

PHPSI-J11 1 13/16 PATTERN CONTROLLERS
HIGH CAPACITY FIXED
PHPSI-J21 3 1/16
PHPSI-J22 4 1/8
PHPSI-J31 4 5/16 LOW REZ
PHPSI-J32 5 3/8
PHPSI-J41 5 9/16
PHPSI-J42 6 5/8
Inlet Diameter H
5, 6 9 1/4
7, 8, 9 12 7/16
10 14

SERIES PHPS-J SPECIFICATIONS
Diffusers shall be available with 1 to 4 slots. Discharge Performance Specification
deflectors shall be integral with the diffuser housing and The manufacturer shall provide published performance
be fixed in one way or two way blow directions. Standard data. Data shall be tested in accordance to ANSI/
nominal lengths shall be 24", 36", 48" or 60". Units shall ASHRAE Standard 70-2006.
be constructed of corrosion resistant steel.
The inlet collar must have at least 1 1/2" depth for duct
connection. The standard finish will be white.
The lower flange of the deflectors shall provide support
for adjacent ceiling tile without additional ceiling grid
tee bars. Lower flanges shall be constructed of a double
metal thickness for rigidity.
Optional internal insulation shall be available. Factory
furnished plaster frames and inlet dampers shall be
available as optional accessories.
PHP-J MODEL NUMBER SPECIFICATION

Model -Non-insulated # of Slots Slot Lengths Inlets Available Finishes
PHPS-J-10-6 1" Slot Width 1 24" No Inlet Standard
2 36" 5" Oval 25 White Tee / Black Border
PLENUM SLOT
3 48" 6" Oval Optional

DIFFUSERS
4 60" 7" Oval 26 All White

9" Oval
10" Oval
Model - Insulated # of Slots Slot Lengths Inlets Available Accessories

PHPSI-J-10-6 1" Slot Width 1 24" No Inlet ID Inlet Damper
2 36" 5" Oval PHP-J-TBPF T-bar Plaster Frame
PATTERN CONTROLLERS
3 48" 6" Oval EI External Insulation

HIGH CAPACITY FIXED
4 60" 7" Oval CC Closed Cell Insulation

8" Oval
9" Oval
10" Oval
Available Options
PHPS-J
MODEL PHP-J
CFM 20 40 60 80 100 CFM 120 240 360 480 600
1 Slot Ps .010 .030 .060 .100 .150 3 Slot Ps .010 .030 .060 .120 .190
1-Way Throw 11 17 22 25 27 1-Way Throw 17 27 35 40 43
NC <20 <20 <20 22 27 NC <20 <20 21 30 37
CFM 40 80 120 160 200 CFM 120 240 360 480 600
2 Slot Ps .010 .030 .070 .120 .180 Ps .010 .030 .060 .100 .160
4' Length
1-Way 3 Slot
Throw 14 21 27 31 34 Throw 1 11 17 22 25 27
2-Way
NC <20 <20 <20 26 31 Throw 2 14 21 27 31 34
CFM 40 80 120 160 200 NC <20 <20 22 31 38
2 Slot Ps .010 .030 .060 .090 .140 CFM 160 320 480 640 800
2-Way Throw 11 17 22 25 27 4 Slot Ps .010 .030 .060 .110 .170
NC <20 <20 <20 22 27 2-Way Throw 14 21 27 31 34
2' Length
CFM 60 120 180 240 300 NC <20 <20 26 34 42
3 Slot Ps .010 .030 .060 .120 .190

1-Way Throw 17 27 35 40 43 CFM 50 100 150 200 250
NC <20 <20 <20 26 31 1 Slot Ps .010 .040 .090 .150 .240
CFM 60 120 180 240 300 1-Way Throw 11 17 22 25 27
Ps .010 .030 .060 .100 .150 NC <20 <20 21 30 37
3 Slot
Throw 1 11 17 22 25 27 CFM 100 200 300 400 500
2-Way
Throw 2 14 21 27 31 34 2 Slot Ps .010 .040 .060 .140 .220
PLENUM SLOT
NC <20 <20 <20 26 32 1-Way Throw 14 21 27 31 34
DIFFUSERS
CFM 80 160 240 320 400 NC <20 <20 24 35 43
4 Slot Ps .010 .030 .060 .100 .150 CFM 100 200 300 400 500
2-Way Throw 14 21 27 31 34 2 Slot Ps .010 .030 .060 .110 .170
NC <20 <20 21 29 36 2-Way Throw 11 17 22 25 27
NC <20 <20 21 30 37
5' Length
CFM 40 80 120 160 200 CFM 150 300 450 600 750
1 Slot Ps .010 .030 .080 .140 .200 3 Slot Ps .010 .030 .070 .130 .210
1-Way Throw 11 17 22 25 27 1-Way Throw 17 27 35 40 43

NC <20 <20 <20 26 32 NC <20 <20 24 35 43
PATTERN CONTROLLERS
HIGH CAPACITY FIXED
CFM 80 160 240 320 400 CFM 150 300 450 600 750
4' Length
2 Slot Ps .010 .040 .080 .140 .220 Ps .010 .030 .060 .110 .180
1-Way 3 Slot
Throw 14 21 27 31 34 Throw 1 11 17 22 25 27
2-Way
NC <20 <20 21 30 37 Throw 2 14 21 27 31 34
CFM 80 160 240 320 400 NC <20 <20 25 36 44
2 Slot Ps .010 .030 .060 .090 .150 CFM 200 400 600 800 1000
2-Way Throw 11 17 22 25 27 4 Slot Ps .010 .030 .070 .130 .200
NC <20 <20 <20 26 32 2-Way Throw 14 21 27 31 34
NC <20 <20 32 40 48
PHPS-J

MODEL PHPS-J
Performance data is based on tests performed at Donco Air Products and ETL Testing laboratories in accordance with ADC 1062
GRD - 84 Test Code.
DEFINITION OF UNITS
Throw 1 and Throw 2 indicates number of slots throwing each direction on 3 slot, 2-way diffuser
PLENUM SLOT
DIFFUSERS
PATTERN CONTROLLERS
HIGH CAPACITY FIXED
PHPS-J
MODEL PHPS-E
The PHPS-E features the same aerodynamically
curved control vanes used in the PHPS-J. It maintains
an air pattern tight against the ceiling in constant
or variable control systems. At only 9" of height,
the PHPS-E requires minimum space but provides
maximum performance and flexibility for interior or
perimeter applications.
Control vanes have double metal thickness at slot face for additional strength and rigidity
Pattern
Tag: Control Vanes are shipped loose to allow field installation for left or right throw
Engineer:
(factory
Project: installation for additional charge)
Contractor:
Corrosion
Location: resistant steel construction
Architect: Submittal PHPS-E-6 / PHPSI-E-6
Date: Submitted By:
Available in 1 and 2 slots
E Series Plenum Slot Diffuser
Available
Steel lengths
Construction 24", 36", 48" and 60"
PHPS-E-6 E-Series Plenum Slot Diffuser / T-Bar Lay-In / Steel Construction Un-Insulated
Models
24" lengthsPHPSI-E-6
has one vane per Plenum
slot. Lengths 36", /48" and 60"/have
E-Series Slot Diffuser T-Bar Lay-In Steel two vanes per
Construction individual slot
Insulated
Optional insulation
The E-Series featureson
thePHPSI-E
same aerodynamically At only 9" of height, the E-Series requires minimum
curved control vane used in the J-Series. It maintains space but provides maximum performance and
an air pattern
Available for tight
Donnagainst the ceiling
Fine Line/Bolt in constant
Slot or
application flexibility for interior or perimeter applications.
variable air control systems.
Standard Standard 2 Slot

1 Slot 2 Slot Optional Center Tee
Insulation
Options
PLENUM SLOT
STD
DIFFUSERS
1/2" Fiberglass
Optional Internal
1/2" CC
Closed Cell
Fiberglass Foam
Insulation EI
External 9"
Insulated
1/2" Foil Back
A S A A S EN S A A S CT S A

4"
PATTERN CONTROLLERS
2" 4"
Control Vanes have double metal "A" Side Border 1/2"
HIGH CAPACITY FIXED
Available Available Inlets
thickness at slot face for "S" Slot Width 1"
additional strength and rigidity. Sizes All Oval
"EN" End Notch 5/8"
"CT" Center Tee 1" 24" 5"
Options
36" 6"
Inlet Damper (Oval) 48" 7"
CN Cross Notch 24" Only 60" 8"
CT Center Tee
Pattern Control Vanes are shipped T1 One Outside Tee
10"
loose to allow field installation for T2 Two outside Clip
left or right throw.
Control Vanes can be
factory installed at an
additional charge.
Vanes Per Slot

24" 1
36" 2
48" 2 24 Gauge Galvannealed Steel. All Exposed Surfaces and Control Vanes are painted.
PHPS-E
60" 2 PHPS-E / PHPSI-E Rev B Date 07/12/11 Dimension Are In Inches Page 1 of 1

SERIES PHPS-E SPECIFICATIONS
Diffusers shall be available with 1 or 2 slots. Discharge Performance Specification
deflectors shall be integral with the diffuser housing and The manufacturer shall provide published performance
be fixed in one-way or two-way blow directions. Standard data. Data shall be tested in accordance to ANSI/
nominal lengths shall be 24", 36", 48" or 60". Units shall ASHRAE Standard 70-2006.
be constructed of corrosion resistant steel.
The inlet collar must have at least 1 1/2" depth for duct
connection. The standard finish will be white.
Optional internal insulation shall be available. Factory
furnished plaster frames and inlet dampers shall be
available as optional accessories.
PHP-E MODEL NUMBER SPECIFICATION

Model -Non-insulated # of Slots Slot Lengths Inlets Available Finishes
PHPS-E-10-6 1" Slot Width 1 24" No Inlet Standard
PHPS-E-10-9 1" Slot Width 2 36" 5" Oval 25 White Tee / Black Border
48" 6" Oval Optional
60" 7" Oval 26 All White
10" Oval
PLENUM SLOT
DIFFUSERS
Model - Insulated # of Slots Slot Lengths Inlets Available Accessories

PHPSI-E-10-6 1" Slot Width 1 24" No Inlet ID Inlet Damper
PHPSI-E-10-9 1" Slot Width 2 36" 5" Oval PHP-E-TBPF T-bar Plaster Frame
48" 6" Oval EI External Insulation
60" 7" Oval CC Closed Cell Insulation
8" Oval
10" Oval
Available Options
PATTERN CONTROLLERS
HIGH CAPACITY FIXED

PHPS-E
SERIES PHPS PERFORMANCE DATA
MODEL PHPS-E
CFM 40 50 60 80 100 120
1 Slot Pt .020 .040 .050 .090 .150 .210

6" Inlet Throw 6 8 11 14 18 20
2' Length
NC <20 <20 <20 23 30 33

CFM 75 100 125 150 175 200
2 Slot Pt .000 .040 .060 .090 .120 .160

6" Inlet Throw 6 8 11 14 16 18
NC <20 <20 <20 22 27 30
CFM 75 100 125 175 200 250
1 Slot Pt .030 .050 .080 .150 .190 .280

6" Inlet Throw 7 10 13 17 19 22
4' Length
NC <20 <20 <20 29 32 36

CFM 150 200 250 300 350 400
2 Slot Pt .030 .050 .070 .110 .150 .190

8" Inlet Throw 7 10 12 15 17 19
NC <20 <20 <20 23 29 32
CFM 100 140 180 220 260 300
1 Slot Pt .030 .060 .090 .130 .190 .250

8" Inlet Throw 9 12 15 17 20 22
5' Length
NC <20 <20 25 31 35 37
PLENUM SLOT
CFM 175 225 275 350 425 500
DIFFUSERS
2 Slot Pt .020 .030 .050 .080 .120 .160
10" Inlet Throw 7 9 11 14 17 19
NC <20 <20 <20 25 30 34
PERFORMANCE NOTES FOR SERIES PHPSE

MODEL PHPS-E
Performance data is based on tests performed at Donco Air Products and ETL
Testing laboratories in accordance with ADC 1062 GRD - 84 Test Code.

DEFINITION OF UNITS PATTERN CONTROLLERS
Pt Total pressure (inches of water column) HIGH CAPACITY FIXED
Throw 1 and Throw 2 indicates number of slots throwing each direction on 3 slot, 2-way diffuser
PHPS-E

LIGHT TROFFER DIFFUSERS
Model LT light troffer is designed with the flexibility to mount onto all air
diffusion light fixtures. Each order is engineered to allow for a custom fit onto
each light fixture. This ensures tight fit with the light fixture regardless of
which lighting manufacturer has been selected. PAGE 43
PLENUM SLOT
DIFFUSERS
MODEL LT
The LT high performance light troffer diffusers is
designed to attach quickly and easily to standard air
handling fluorescent light fixtures. Light troffer diffusers
have the architectural advantage of hiding the air
distribution device by using a small slot on the outside
of the light fixture to discharge or return conditioned air.
Tag:
The LT cuts down on ceiling clutter by using the same
*AIRE
METAL
Series : HP
ceiling opening for the light fixture and air diffuser. Submittal No: HP-LT
Lightexcellent
Provides Troffer air Diffuser
distribution while hiding the air distribution device into the light fixture
Galvanized Steel
Custom engineered to ensure a tight fit with minimum leakage
Models: SS-LT-6 Single Sided Supply - Non Insulated
SSI-LT-6
Optional 1/2" internal Single
insulation Sided Supply - Insulated
available
SSR-LT-6 Single Sided Return - Non Insulated
Available withSSRI-LT-6
single or doubleSingle
sided supply configurations
Side Return - Insulated
DS-LT-6 Double Sided Supply - Side Inlet - Non Insulated
Model DS-LT double sided diffuser is available with side or top inlets for installation flexibility
DSI-LT-6 Double Sided Supply - Side Inlet - Insulated
DST-LT-6
Matching single sided plenumDouble Sided
return unit Supply
model - Top
SSR-LT Inlet - Non Insulated
is available
DSTI-LT-6 Double Sided Supply - Top Inlet - Insulated
Model: SS-LT (SSI-LT) 1

12 Mounting Bracket Nominal Light Typical
Typical Air Diffuser Length 2 (Shipped Flat-Bent in Troffer Lengths Return Length
Nominal
field to suit Light Troffer) Typical Return
Light Troffer
3 24
Length
Length 17
8
Air
5 2436 17 25 3/4
Diffuser Volume 3648 25 3/4 40
Height Control 48 40
8 (Typ.) Damper
PLENUM SLOT
* Typical air diffuser lengths vary with air handling
Air Pattern
DIFFUSERS
light troffer manufacturer. Specify the light fixture
Optional Deflector
Troffer manufacturer's name and model number on all orders.
Slot Ceiling clearance required is typically 8" but can be
Side Inlet Location Regress 3 as little as 6" above the ceiling line.
Hold Down Tabs 4
Typical Air Diffuser

Model: DS-LT-6, DSI-LT-6 ( Options: DST-LT-6, DSTI-LT-6 ) Nominal Light
Dimensions
Number HP-LT
Optional Top Troffer Lengths
Typical Air Diffuser Length (L*) 1
12 Inlet Location
Crossover Length (C)
1
12 (Width
Nominalx Length) W" Air L"
Typical C
Light Troffer Diffuser Dimensions
12 x 48
(Width x Length) W* 12 L* 40C 18
3 2
8 24
12 x 48 x 24 12 2440 1718 12
Air 5
24 X 24 24
Diffuser Crossover 24 x 48 2417 4012 18
Volume Control 24 X 48 24 40 18
Height
36 x 36 36
25 3/4 25 3/4 18

8 (Typ.) Damper 36 X 36 36 18
Optional 1
Troffer Air Pattern 14 * Typical air diffuser widths and lengths vary with air
Slot Deflector handling light troffer manufacturer. Specify the light
Submittal
Regress fixture manufacturer's name and model number on

Optional Side all orders. Ceiling clearance required is typically 8"
3 (Typ.)
Hold Down Tabs Inlet Location 4 but can be as little as 6" above the ceiling line.
Typical Air Diffuser Top inlet units extend above this dimension.
Width (W*) Entire diffuser is shipped completely assembled
to the job site.
Model: SSR-LT (SSRI-LTI)

Mounting Bracket
(Shipped Flat-Bent in
Typical Return Length 2 1/2
field to suit Light Troffer)
Nominal Light Typical
Nominal
Side Outlet 2
Troffer Lengths
Light Troffer Return
Typical ReturnLength
Length
Length
5
24 17
24 17
Return 36 25 3/4
1
14 36 25 3/4
Height
8 (Typ.) 4848 40 40
Optional
Troffer Volume
Control * Typical Return lengths vary with air handling light troffer
Slot manufacturer. Specify the light fixture manufacturer's name
Regress Damper
and model number on all orders. Ceiling clearance required
3 is typically 8" but can be as little as 6" above the ceiling line.
Hold Down Tabs 4
LT

4. Construction Details PSD43
Standard Finish: Electrogalvanized steel plenum.
27 - Black Edges Plenum inlets available in 4", 5", 6" and 7"
SERIES LT SPECIFICATIONS
SINGLE SIDED SUPPLY LIGHT TROFFER DOUBLE SIDED SUPPLY - SIDE/TOP INLET
DIFFUSER T-BAR LAY-IN LIGHT TROFFER DIFFUSER T-BAR
INSULATED/NON-INSULATED LAY-IN INSULATED/NON-INSULATED
Single sided supply light troffer diffusers shall be Double sided supply light troffer diffusers shall be
METALAIRE SS-LT-6 (non-insulated) or SSI-LT-6 METALAIRE DS-LT-6 or DST-LT-6 (non-insulated) or
(insulated). Light troffer diffusers shall be of the sizes as DSI-LT-6 or DSTI-LT-6 (insulated). Light troffer diffusers
shown on the device schedule and shall be fabricated to shall be of the sizes as shown on the device schedule and
fit the manufacturer and model of light fixture specified. shall be fabricated to fit the manufacturer and model of
Diffuser shall be single sided with a side inlet. Units light fixture specified.
shall be shipped fully assembled and include hold down Diffusers shall be double sided and be available with
tabs for positive alignment and locking the light troffer either a top or side inlet. Units shall be shipped fully
diffuser onto the slot of the light fixture. assembled and include hold down tabs for positive
Inlets shall be oval, centrally located, with a minimum alignment and locking the light troffer diffuser onto the
depth of 2 1/8" for ease of duct connection. Light troffer slot of the light fixture.
diffusers shall be constructed of corrosion-resistant Side inlets shall be oval; top inlets shall be round.
galvanized steel. Inlets shall be centrally located, with a minimum depth
Diffuser face shall be black. of 2 1/8" for ease of duct connection. Light troffer
Insulated diffusers shall be model SSI-LT-6. Internal diffusers shall be constructed of corrosion resistant
Insulation shall be 1/2" thick. External insulation shall galvanized steel.
be 1/2" thick with a vapor barrier. Diffuser face shall be black.
Matching return should be model SSRI-LT-6, insulated or Insulated diffusers shall be model DSI-LT-6 or DSTI-LT-6.
model SSR-LT-6, non-insulated. Internal insulation shall be 1/2" thick. External insulation
shall be 1/2" thick with a vapor barrier.
PLENUM SLOT
DIFFUSERS
LT
LT MODEL NUMBER SPECIFICATION
LIGHT TROFFER DIFFUSER
Single Sided Supply Inlets Module Available Finishes
SS-LT-6 Non-insulated 4" 24" x 24" Standard
SS-LT-6 Insulated 5" 36" x 36" 27 All Black
Single Sided Return Inlets Module Available Accessories

SSR-LT-6 Non-insulated 6" 48" x 48" LQ Locking Quadrant Damper
SSE-LT-6 Insulated 7" CC Thermopure Insulation
Double Sided Side Inlet Inlets Module

DS-LT-6 Non-insulated 4" 24" x 24"
DS-LT-6 Insulated 5" 36" x 36"
6" 48" x 48"
Double Sided Top Inlet 7" 12" x 48"
DST-LT-6 Non-insulated 24" x 48"
DSTI-LT-6 Insulated
PLENUM SLOT
DIFFUSERS
LT

SERIES SS-LT PERFORMANCE DATA
MODEL SS-LT/SSI-LT
CFM/LF 10 15 20 25 30 35 40 50
CFM 20 30 40 50 60 70 80 100
Ps .020 .045 .081 .126 .182 .247 .323 .504
Horizontal Pt .022 .048 .086 .134 .104 .264 .344 .538
Throw 2-3-6 3-5-9 4-6-11 5-8-12 6-9-13 7-10-14 9-11-15 10-12-17
NC <15 <15 15 22 28 33 37 44
5" Inlet
CFM 20 30 40 50 60 70 80 100
Ps .020 .045 .081 .126 .182 .247 .323 .504
Vertical Pt .022 .048 .086 .134 .194 .264 .344 .538
Throw 1-2-4 2-3-5 2-4-7 3-4-8 4-5-9 4-6-9 5-7-10 6-8-11
2' Length
NC <15 <15 15 22 28 33 37 44
CFM 20 30 40 50 60 70 80 100
Ps .019 .043 .077 .121 .174 .237 .309 .483
Horizontal Pt .020 .045 .080 .125 .180 .245 .320 .499
Throw 2-3-6 3-5-9 4-6-11 5-8-12 6-9-13 7-10-14 9-11-15 10-12-17
NC <15 <15 15 22 28 33 37 44
6" Inlet
CFM 20 30 40 50 60 70 80 100
Ps .019 .043 .077 .121 .174 .237 .309 .483
Vertical Pt .020 .045 .080 .125 .180 .245 .320 .499
Throw 1-2-4 2-3-5 2-4-7 3-4-8 4-5-9 4-6-9 5-7-10 6-8-11
NC <15 <15 15 22 28 33 37 44
CFM 30 45 60 75 90 105 120 -
PLENUM SLOT
DIFFUSERS
Ps .024 .053 .095 .148 .213 .290 .379 -

Horizontal Pt .027 .060 .107 .167 .240 .327 .427 -
Throw 1-2-7 2-5-10 4-7-12 5-8-13 7-10-15 8-11-16 9-12-17 -
NC <15 <15 18 25 31 37 42 -
5" Inlet
30 45 60 75 90 105 120 -
Ps .021 .048 .085 .133 .192 .261 .341 -
Vertical Pt .024 .055 .097 .152 .219 .298 .390 -
Throw 1-2-4 2-3-6 3-4-8 3-5-9 4-6-10 5-7-11 5-8-12 -
3' Length
NC <15 <15 18 25 31 37 42 -
CFM 30 45 60 75 90 105 120 -

Ps .024 .053 .095 .148 .213 .290 .379 -
Horizontal Pt .025 .057 .100 .157 .226 .308 .402 -
Throw 1-2-7 2-5-10 4-7-12 5-8-13 7-10-15 8-11-16 9-12-17 -
NC <15 <15 18 25 31 37 42 -
6" Inlet
CFM 30 45 60 75 90 105 120 -
Ps .021 .048 .085 .133 .192 .261 .341 -
Vertical Pt .023 .051 .091 .142 .205 .279 .365 -
Throw 1-2-4 2-3-6 3-4-8 3-5-9 4-6-10 5-7-11 5-8-12 -
NC <15 <15 18 25 31 37 42 -
LT
SERIES SS-LT PERFORMANCE DATA
MODEL SS-LT/SSI-LT
CFM/LF 10 15 20 25 30 35 40 50
CFM 40 60 80 100 120 140 - -
Ps .028 .062 .111 .173 .250 .340 - -
Horizontal Pt .033 .075 .132 .207 .298 .406 - -
Throw 1-2-6 2-4-9 4-6-10 5-7-12 6-9-13 7-10-14 - -
NC <15 <15 23 30 37 44 - -
5" Inlet
CFM 40 60 80 100 120 140 - -
Ps .026 .059 .105 .164 .236 .321 - -
Vertical Pt .032 .071 .126 .197 .284 .387 - -
Throw 1-2-4 2-3-6 3-4-8 3-5-8 4-6-9 5-7-10 - -
4' Length
NC <15 <15 23 30 37 44 - -
CFM 40 60 80 100 120 140 - -
Ps .028 .062 .111 .173 .250 .340 - -
Horizontal Pt .030 .068 .121 .190 .273 .372 - -
Throw 1-2-6 2-4-9 4-6-10 5-7-12 6-9-13 7-10-14 - -
NC <15 <15 23 30 37 44 - -
6" Inlet
CFM 40 60 80 100 120 140 - -
Ps .026 .059 .105 .164 .236 .321 - -
Vertical Pt .029 .065 .115 .180 .259 .352 - -
Throw 1-2-4 2-3-6 3-4-8 3-5-8 4-6-9 5-7-10 - -
PLENUM SLOT
NC <15 <15 23 30 37 44 - -
DIFFUSERS
LT

SERIES DS-LT PERFORMANCE DATA
MODEL DS-LT/DSI-LT - TOP INLET
WxL CFM/LF 15 20 25 30 35 40 45 50 55 60
CFM 30 40 50 60 70 80 90 100 110 120
Ps .014 .026 .040 .057 .078 .102 .129 .160 .193 .230
Horizontal Pt .017 .031 .048 .070 .095 .124 .156 .193 .234 .278
Throw 0-1-2 0-1-3 1-2-4 1-2-4 1-3-5 2-3-6 2-3-7 2-4-7 3-4-8 3-4-9
NC <15 <15 <15 <15 17 21 25 28 32 36
5" Inlet
CFM 30 40 50 60 70 80 90 100 110 120
Ps .014 .026 .040 .057 .078 .102 .129 .160 .193 .230
Vertical Pt .017 .031 .048 .070 .095 .124 .156 .193 .234 .278
Throw 1-1-3 1-2-4 1-3-5 2-3-7 3-4-8 3-4-8 3-5-9 4-5-9 4-6-10 4-7-10
NC <15 <15 <15 <15 17 21 25 28 32 36
2' x 2'
CFM 30 40 50 60 70 80 90 100 110 120

Ps .013 .024 .037 .054 .073 .096 .121 .150 .181 .216
Horizontal Pt .015 .027 .042 .060 .081 .106 .135 .156 .201 .239
Throw 0-1-2 0-1-3 1-2-4 1-2-4 1-3-5 2-3-6 2-3-7 2-4-7 3-4-8 3-4-9
NC <15 <15 <15 <15 17 21 25 28 32 36
6" Inlet
CFM 30 40 50 60 70 80 90 100 110 120
Ps .013 .024 .037 .054 .073 .096 .121 .159 .161 .216
Vertical Pt .015 .027 .042 .060 .081 .106 .135 .168 .201 .239
Throw 1-1-3 1-2-4 1-3-5 2-3-7 3-4-8 3-4-8 3-5-9 4-5-9 4-6-10 4-7-10
NC <15 <15 <15 <15 17 21 25 28 32 36
CFM 45 60 75 90 105 120 135 150 165 180
PLENUM SLOT
DIFFUSERS
Ps .017 .030 .048 .069 .093 .122 .154 .191 .231 .274
Horizontal Pt .024 .043 .067 .096 .130 .170 .215 .266 .322 .383
Throw 0-1-4 1-2-5 1-2-6 2-4-7 2-4-8 3-5-10 4-5-10 4-6-11 4-7-11 5-7-12
NC <15 <15 <15 16 21 25 29 32 35 37
5" Inlet
45 60 75 90 105 120 135 150 165 180
Ps .017 .030 .048 .069 .093 .122 .154 .191 .231 .274
Vertical Pt .024 .043 .067 .096 .130 .170 .215 .266 .322 .383
Throw 0-1-3 1-2-4 1-2-5 2-3-7 2-4-7 3-4-8 3-5-8 4-5-9 4-6-9 4-7-9
NC <15 <15 <15 16 21 25 29 32 35 37
3' x 3'
CFM 45 60 75 90 105 120 135 150 165 180

Ps .015 .027 .042 .061 .083 .108 .137 .169 .205 .244
Horizontal Pt .019 .033 .051 .074 .101 .132 .167 .206 .249 .296
Throw 0-1-4 1-2-5 1-2-6 2-4-7 2-4-8 3-5-10 4-5-10 4-6-11 4-7-11 5-7-12
NC <15 <15 <15 16 21 25 29 32 35 37
6" Inlet
CFM 45 60 75 90 105 120 135 150 165 180
Ps .015 .027 .042 .061 .083 .108 .137 .169 .205 .244
Vertical Pt .019 .033 .051 .074 .101 .132 .167 .206 .249 .296
Throw 0-1-3 1-2-4 1-2-5 2-3-7 2-4-7 3-4-8 3-5-8 4-5-9 4-6-9 4-7-9
NC <15 <15 <15 16 21 25 29 32 35 37
LT
MODEL DS-LT/DSI-LT - TOP INLET
WxL CFM/LF 15 20 25 30 35 40 45 50 55 60
CFM 60 80 100 120 140 160 180 200 220 -
Ps .023 .042 .065 .094 .127 .166 .210 .260 .314 -
Horizontal Pt .035 .063 .099 .142 .193 .252 .319 .394 .477 -
Throw 1-2-4 2-3-5 2-3-7 3-4-8 3-5-8 4-5-9 4-6-9 4-7-10 5-7-10 -
NC <15 <15 16 21 26 30 33 37 41 -
5" Inlet
CFM 60 80 100 120 140 160 180 200 220 -
Ps .023 .042 .065 .094 .127 .166 .210 .260 .314 -
4' x 4'
Vertical Pt .035 .063 .099 .142 .193 .252 .319 .394 .477 -
Throw 0-1-4 1-2-5 1-2-6 2-4-6 2-4-7 3-5-7 4-5-8 4-6-8 4-6-8 -
NC <15 <15 16 21 26 30 33 37 41 -
2' x 4'
CFM 60 80 100 120 140 160 180 200 220 -

Ps .021 .037 .058 .083 .113 .148 .187 .231 .280 -
1' x 4'
Horizontal Pt .027 .047 .074 .107 .145 .189 .240 .296 .358 -
Throw 1-2-4 2-3-5 2-3-7 3-4-8 3-5-8 4-5-9 4-6-9 4-7-10 5-7-10 -
NC <15 <15 16 21 26 30 33 37 41 -
6" Inlet
CFM 60 80 100 120 140 160 180 200 220 -
Ps .021 .037 .058 .083 .113 .148 .187 .231 .280 -
Vertical Pt .027 .047 .074 .107 .145 .189 .240 .296 .358 -
Throw 0-1-4 1-2-5 1-2-6 2-4-6 2-4-7 3-5-7 4-5-8 4-6-8 4-6-8 -
PLENUM SLOT
NC <15 <15 16 21 26 30 33 37 41 -
DIFFUSERS
LT

MODEL DS-LT/DSI-LT - SIDE INLET
WxL CFM/LF 15 20 25 30 35 40 45 50 55 60
CFM 30 40 50 60 70 80 90 100 110 120
Ps .016 .029 .046 .066 .089 .117 .148 .182 .221 .263
Horizontal Pt .019 .035 .054 .078 .106 .138 .175 .216 .261 .311
Throw 0-1-2 0-1-4 1-2-6 1-2-9 1-3-10 2-4-11 2-5-11 3-6-12 3-7-13 4-9-13
NC <15 <15 <15 <15 17 22 26 29 32 36
5" Inlet
CFM 30 40 50 60 70 80 90 100 110 120
Ps .016 .029 .046 .066 .089 .117 .148 .182 .221 .263
Vertical Pt .019 .035 .054 .078 .106 .138 .175 .216 .261 .311
Throw 1-1-3 1-2-4 2-3-5 2-3-6 2-4-7 3-4-8 3-5-8 3-5-9 4-6-9 4-6-10
NC <15 <15 <15 <15 17 22 26 29 32 36
2' x 2'
CFM 30 40 50 60 70 80 90 100 110 120

Ps .014 .025 .040 .057 .078 .102 .129 .159 .193 .229
Horizontal Pt .016 .028 .044 .063 .086 .112 .142 .175 .212 .253
Throw 0-1-2 0-1-4 1-2-6 1-2-9 1-3-10 2-4-11 2-5-11 3-6-12 3-7-13 4-9-13
NC <15 <15 <15 <15 17 22 26 29 32 36
6" Inlet
CFM 30 40 50 60 70 80 90 100 110 120
Ps .014 .025 .040 .057 .078 .102 .129 .159 .193 .229
Vertical Pt .016 .028 .044 .063 .086 .112 .142 110 .212 .253
Throw 1-1-3 1-2-4 2-3-5 2-3-6 2-4-7 3-4-8 3-5-8 .221 4-6-9 4-6-10
NC <15 <15 <15 <15 17 22 26 29 32 36
CFM 45 60 75 90 105 120 135 150 165 180
PLENUM SLOT
DIFFUSERS
Ps .021 .038 .059 .085 .115 .150 .190 .235 .284 .339
Horizontal Pt .028 .050 .078 .112 .152 .199 .252 .311 .376 .447
Throw 0-1-4 1-2-5 1-2-6 2-4-7 2-4-8 3-5-9 4-5-11 4-6-11 4-6-12 5-7-12
NC <15 <15 <15 19 24 28 31 34 36 39
5" Inlet
45 60 75 90 105 120 135 150 165 180
Ps .021 .038 .059 .085 .115 .150 .190 .235 .284 .339
Vertical Pt .028 .050 .078 .112 .152 .199 .252 .311 .376 .447
Throw 0-1-4 1-2-5 1-2-6 2-4-7 2-4-8 3-5-10 4-5-11 4-6-12 4-7-12 5-7-13
NC <15 <15 <15 19 24 28 31 34 36 39
3' x 3'
CFM 45 60 75 90 105 120 135 150 165 180

Ps .018 .033 .051 .074 .100 .131 .166 .205 .248 .295
Horizontal Pt .022 .039 .060 .087 .118 .154 .195 .241 .292 .347
Throw 0-1-4 1-2-5 1-2-6 2-4-7 2-4-8 3-5-9 4-5-11 4-6-11 4-6-12 5-7-12
NC <15 <15 <15 19 24 28 31 34 36 39
6" Inlet
CFM 45 80 75 90 105 120 135 150 165 180
Ps .018 .033 .051 .074 .100 .131 .166 .205 .248 .295
Vertical Pt .022 .039 .060 .087 .118 .154 .195 .241 .292 .347
Throw 0-1-4 1-2-5 1-2-6 2-4-7 2-4-8 3-5-10 4-5-11 4-6-12 4-7-12 5-7-13
NC <15 <15 19 24 28 31 34 36 39
LT
MODEL DS-LT/DSI-LT - SIDE INLET
WxL CFM/LF 15 20 25 30 35 40 45 50 55 60
CFM 60 80 100 120 140 160 180 200 - -
Ps .031 .056 .087 .125 .171 .223 .282 .349 - -
Horizontal Pt .043 .077 .121 .174 .237 .309 .391 .483 - -
Throw 1-2-3 1-2-4 2--3-5 2-3-6 2-4-7 3-4-8 3-5-9 3-5-10 - -
NC <15 <15 20 25 29 33 37 41 - -
5" Inlet
CFM 60 80 100 120 140 160 180 200 - -
Ps .031 .056 .087 .125 .171 .223 .282 .349 - -
4' x 4'
Vertical Pt .043 .077 .121 .174 .237 .309 .391 .483 - -

Throw 0-1-2 0-1-4 1-1-6 1-2-6 1-3-7 2-4-7 2-5-8 3-6-8 - -
NC <15 <15 20 25 29 33 37 41 - -
2' x 4'
CFM 60 80 100 120 140 160 180 200 - -

Ps .026 .046 .072 .103 .141 .184 .233 .287 - -
1' x 4'
Horizontal Pt .032 .056 .088 .127 .172 .225 .285 .352 - -

Throw 1-2-3 1-2-4 2-3-5 2-3-6 2-4-7 3-4-8 3-5-9 3-5-10 - -
NC <15 <15 20 25 29 33 37 41 - -
6" Inlet
CFM 60 80 100 120 140 160 180 200 - -
Ps .026. .046 .072 .103 .141 .184 .233 .287 - -
Vertical Pt .032 .056 .088 .127 .172 .225 .285 .352 - -
Throw 0-1-2 0-1-4 1-1-6 1-2-6 1-3-7 2-4-7 2-5-8 3-6-8 - -
PLENUM SLOT
NC <15 <15 20 25 29 33 37 41 - -
DIFFUSERS
MODEL DS-LT
DEFINITION OF UNITS

LT

ACCESSORIES
Model LQ Locking Quadrant Damper
Model PHPTBPF Mounting frame can be used in a sheetrock or plaster ceiling.

The frame is shipped separately and is mounted in the ceiling by
others.
Submittal: LQ
Locking Quadrant Damper
Models: LQ Stamped Heavy Gauge Steel
MODEL LQ
2 3/16"
PLENUM SLOT
The locking quadrant is stamped of heavy gauge steel and KL-7R

DIFFUSERS
clearly indicates the position of the damper. The quadrant

handle locks the shaft of the damper using a friction device 4 5/32" For 1/2"Rod 5 3/16"
strong enough to cut into the damper shaft eliminating

damper rattle.
Stands Off Duct 1 3/16"
The Locking Quadrant is Srtamped of Heavy Guage Steel and Clearly Indicates the Position of the Damper.
The Quadrant Handle Locks the Shaft of the Damper using a Friction Device strong enough to cut into the
Damper Shaft Eliminating Damper Rattle.
ACCESSORIES

MODEL PHP-TBPF
Plaster frames permit installation of T-bar frame style plenum slot
diffusers into plaster frames or gypsum ceilings.
Converts T-bar frame to Surface Mount
Available in standard T-bar sizes
PLENUM SLOT
DIFFUSERS
B
Models L 1 Slot 2 Slots 3 Slots 4 Slots
PHP-TBPF-50 24, 36, 48, 60 1 3/4 3 1/4 4 3/4 6 1/4
PHP-TBPF-75 24, 36, 48, 60 2 3 3/4 5 1/2 7 1/4
PHP-TBPF-10 24, 36, 48, 60 2 1/4 4 1/4 6 1/4 8 1/4
PHP-TBPF-15 24, 36, 48, 60 2 3/4 5 1/4 7 3/4 10 1/4
ACCESSORIES

CRITICAL ENVIRONMENT
PRODUCTS
METALAIRE offers a complete line of critical environment products designed for clean
rooms, hospital operating rooms, patient isolation rooms as well as laboratories and
manufacturing facilities.
Laminar Flow Diffusers have been engineered to provide a

vertical projection of low velocity supply air. The laminar flow
diffuser introduces clean supply air without the entrainment of
CRITICAL ENVIRONMENT PRODUCTS

contaminated air in the space due to its low velocity. PAGE 2
Directional Flow Diffusers are specifically engineered to improve

patient comfort in critical health care applications such as
isolation rooms and trauma centers. PAGE 16
Radial Flow Diffusers are an effective method of air distribution

for clean room applications such as laboratories where a high
volume of air is required. The air pattern design produces a
uniform pattern to prevent dead spots where contaminants
can remain. PAGE 22
Periflow Operating Room System is custom designed and

precisely fabricated to accommodate the specialized medical,
mechanical, and electrical considerations of todays operating
room environments. PAGE 40
ENVIRONMENT
PRODUCTS
CRITICAL
HPL-GS
2013 Metal Industries, Inc. CE1

LAMINAR FLOW DIFFUSERS
Model HPL-CL laminar flow diffuser is engineered for supply air distribution
in critical environments such as hospital operating rooms and clean rooms.

The diffusers are engineered to supply a low velocity vertical piston of
conditioned air. PAGE 3
Model HPL-HA laminar flow diffuser has the same features as the HPL-CL
and is designed with a gasket type HEPA filter cell accessible from the face
of the diffuser. PAGE 7
Model HPL-GS is an excellent choice for critical care environments

when the application calls for the use of a HEPA filter in the supply diffuser.
The GS series has an airtight filter housing to accommodate a gel seal
HEPA filter and provides exceptional performance. PAGE 13
ENVIRONMENT
PRODUCTS
CRITICAL
CE2 Metal Industries, Inc. For complete product specifications and submittal data, visit us at www.metalaire.com
SERIES HPL-CL
HPL-CL Laminar Flow Diffuser is engineered for
supply air distribution in critical environments such
as hospital operating rooms and clean rooms.
The diffusers are engineered to supply a low velocity
vertical piston of conditioned air. The diffuser by
design is easy to clean and sterilize. The face
and core assembly can be removed from the face
for cleaning.
Low velocity vertical air pattern
Easily removable face to allow cleaning and sterilization
Choice of all aluminum, stainless steel face and aluminum backpan or all stainless steel construction
Choice of 23%, 40% and standard 51% free area for the perforated face
Available in Surface Mount, T-bar or Metric T-bar frame styles
Optional inlet damper
Stainless steel safety chains are standard

0RGHO+3/&/$/%RUGHU6XUIDFH0RXQW Nominal Size Overall Face Size (L x W)
Ceiling Opening = Nominal Size
(L x W) Border 1 Border 6 Border 6M
Backpan Overall Backpan = Nominal Size - 1 81
24 x 12 25 1/4 x 13 1/4 23 3/4 x 11 3/4 23 5/8 x 11 5/8
Quarter Turn Neck Size - 81
Fasteners 36
Nominal x 12 37 1/4Face
Overall x 13Sizes
1/4 (L x W) 35 3/4 x 11 3/4 35 5/8 x 11 5/8
2" Sizes
9 Border 1 Border 6 Border 6M
32 Countertop (L x W)
Mounting Hole 4" 48 x 12 49 1/4 x 13 1/4 47 3/4 x 11 3/4 47 5/8 x 11 5/8
24 x 12 25-1/4 x 13-1/4 23-3/4 x 11-3/4 23-5/8 x 11-5/8
36 x 60
12 x 37-1/4
12 x 13-1/461 1/4 x 13
35-3/4 1/4
x 11-3/4 35-5/859 3/4 x
x 11-5/8 11 3/4 59 5/8 x 11 5/8
5/8" Removable Perforated Face Panel
48 x 12 49-1/4 x 13-1/4 47-3/4 x 11-3/4 47-5/8 x 11-5/8
141" Border Width 72 x 12 73 1/4 x 13 1/4 71 3/4 x 11 3/4 71 5/8 x 11 5/8
Perforated Face Panel = Nominal Size - 1 38 60 x 12 61-1/4 x 13-1/4 59-3/4 x 11-3/4 59-5/8 x 11-5/8
Overall Face Size = Nominal Size + 1 41 72 x 24

12 x 73-1/4
24 x 13-1/425 1/4 x 25
71-3/4 1/4
x 11-3/4 71-5/823 3/4 x
x 11-5/8 23 3/4 23 5/8 x 23 5/8
24 x 25-1/4
24 x 36 24 x 25-1/437 1/4
23-3/4 x 23-3/4
x 25 1/4 23-5/8 x 23-5/8
35 3/4 x 23 3/4 35 5/8 x 23 5/8
0RGHO+3/&/$/%RUGHU6WDQGDUG/D\,Q7%DU
36 x 24 37-1/4 x 25-1/4 35-3/4 x 23-3/4 35-5/8 x 23-5/8
48 x 49-1/4
48 x 24
24 x 25-1/449 1/4 x 25 1/4
47-3/4 x 23-3/4
47 3/4 x 23 3/4
47-5/8 x 23-5/8
47 5/8 x 23 5/8
T-Bar Module = Nominal Size
Overall Backpan = Nominal Size -1 81 60 x 60
24 x 61-1/4
24 x 25-1/461 1/4 x 25
59-3/4 1/4
x 23-3/4 59-5/859 3/4 x
x 23-5/8 23 3/4 59 5/8 x 23 5/8
Neck Size - 81
ENVIRONMENT
Backpan 72 x 24 73-1/4 x 25-1/4 71-3/4 x 23-3/4 71-5/8 x 23-5/8
72 x 24 73 1/4 x 25 1/4 71 3/4 x 23 3/4 71 5/8 x 23 5/8 PRODUCTS
2" 48 x 36 49-1/4 x 37-1/4 47-3/4 x 35-3/4 47-5/8 x 35-5/8
CRITICAL
60 x 48
36 x 61-1/4
36 x 37-1/449 1/4 x 37
59-3/4 1/4
x 35-3/4 59-5/847 3/4 x
x 35-5/8 35 3/4 47 5/8 x 35 5/8
4"
72 x 36 73-1/4 x 37-1/4 71-3/4 x 35-3/4 71-5/8 x 35-5/8
60 x 36 61 1/4 x 37 1/4 59 3/4 x 35 3/4 59 5/8 x 35 5/8
Removable Perforated Face Panel L = Length, W = Width
1/2" Border Width 72 x 36 73 1/4 x 37 1/4 71 3/4 x 35 3/4 71 5/8 x 35 5/8
Perforated Face Panel = Nominal Size - 1 38
Overall Face Size = Nominal Size - 41
0RGHO+3/&/$/%RUGHU0/D\,Q7%DU0HWULF6L]LQJ
Overall Backpan = Nominal Size -1 81
Backpan Neck Size - 81
2"
HPL-CL
4"
1/2" Border Width Removable Perforated Face Panel

Perforated Face Panel = Nominal Size - 1 38
Overall Face Size = Nominal Size - 38

0RGHOV+3/&/6$6WDLQOHVV6WHHO)DFH $OXPLQXP%DFNSDQ
Back Pan Duct Size - 41

2"
4"
L = Overall Length
W = Overall Width
Removable Perforated
Face Panel
0RGHO+3/&/6$%RUGHU6XUIDFH0RXQW 0RGHO+3/&/6$%RUGHU6WDQGDUG/D\,Q7%DU

C = Ceiling Opening = Module Size T-Bar Module = Nominal Size
7
Backpan Size = Nominal Size - 16 Backpan Size = Nominal Size - 141
4 4
13 Removable Perforated 1 Removable Perforated

16 Face Panel 2 Face Panel
Nominal Size + 1 1 T-Bar Module - 1
4 4
0RGHO+3/&/6$%RUGHU0/D\,Q7%DU0HWULF
T-Bar Module = Nominal Size Frame
Frame 1 1 Frame 6Frame Frame
6F 6M Frame 6M
5 Nominal
Nominal
Backpan = Nominal Size - 18
Size Size C C WW LL W WL W L L W L
12 x 36 1313
12 x 3612 x 3612 x 36 1/41/4 3737
1/4 3/4 11 35
1/411 3/4 11353/4 35 5/8
5/83/4 11 5/8 35 5/8
4 12 x 48 13 1/4
12 x 4812 x 4812 x 48 13 1/4 49 1/4 11 3/4 47 3/4 11 5/8 47 5/8
49 1/4 11 3/4 47 3/4 11 5/8 47 5/8
24 x 24 24 x 24 25 1/4 25 1/4 23 3/4 23 3/4 23 5/8 23 5/8

24 x 24 24 x 24 25 1/4 25 1/4 23 3/4 23 3/4 23 5/8 23 5/8
1 Removable Perforated 24 x 36 24 x 36 25 1/4 37 1/4 23 3/4 35 3/4 23 5/8 35 5/8
2 Face Panel 24 x 36 24 x 36 25 1/4 37 1/4 23 3/4 35 3/4 23 5/8 35 5/8
T-Bar Module - 3
8
24 x 48 24 x 48 25 1/4 49 1/4 23 3/4 47 3/4 23 5/8 47 5/8
24 x 48 24 x 48 25 1/4 49 1/4 23 3/4 47 3/4 23 5/8 47 5/8
0RGHOV+3/&/666WDLQOHVV6WHHO%DFNSDQ )DFH

Duct Size - 41
Back Pan
2
Removable Perforated Face Panel

W = Overall Width
L = Overall Length
0RGHO+3/&/66%RUGHU6XUIDFH0RXQW 0RGHO+3/&/66%RUGHU6WDQGDUG/D\,Q7%DU
C = Ceiling Opening = Nominal Size T-Bar Module = Nominal Size

7
Backpan Size = Nominal Size - 16 1
ENVIRONMENT
PRODUCTS
CRITICAL
4 4
13 Removable Perforated Removable Perforated

1
16 Face Panel
2
Face Panel
Nominal Size + 1 1
4 4
0RGHO+3/&/66%RUGHU0/D\,Q7%DU0HWULF
T-Bar Module = Nominal Size - 1 5
8
Frame
Frame1 1 Frame 66F
Frame Frame 6M
Frame 6M
NominalNominal
Size Size C C L L W W LL WW L LW W
4
HPL-CL
24 x 24 24 x2424x 24 24 x25241/4 25 1/4

25 1/4
25 1/4 23
23 3/4
3/4 23 23
3/43/423 5/82323
5/85/8 23 5/8
Removable Perforated 48 x 24 48 x2424x 48 24 x49481/4 49 1/4

25 1/4
25 1/4 47
47 3/4
3/4 23 23
3/43/447 5/84723
5/85/8 23 5/8
1 Face Panel
2 48 x 12 48 x4812x 12 48 x49121/4 49 1/4
13 1/4
13 1/4 47
47 3/4
3/4 11 11
3/43/447 5/84711
5/85/8 11 5/8
T-Bar Module - 38
24 x 12 24 x2412x 12 24 x25121/4 25 1/4 13 1/4 23
13 1/4 23 3/4 3/43/423 5/82311
3/4 11 11 5/85/8 11 5/8
SERIES HPL-CL SPECIFICATIONS
LAMINAR FLOW DIFFUSER ALUMINUM/ Performance Specification
STAINLESS STEEL MODEL HPL-CL-AL / The manufacturer shall provide published performance
HPL-CL-SA / HPL-CL-SS data. Data shall be tested in accordance to ANSI/
Air outlets shall be model HPL-CL-AL (aluminum), ASHRAE Standard 70-2006.
HPL-CL-SA (stainless steel face/aluminum backpan) or
HPL-CL-SS (stainless steel) manufactured by METALAIRE. Paint Specification
Diffuser shall include an upper and lower pressure METALAIRE 01 paint finish is an anodic electro-
chamber and shall generate a low velocity, vertical piston deposition Melamine cross linking thermo set acrylic
of discharge air. enamel finish, conforming to no less than 9 specific
Diffuser shall be constructed of a one-piece perforated ASTM testing requirements covering a full range of
face and core assembly that is removable from the physical properties. The 01 finish has been tested to
backpan with 1/4" turn fasteners accessible from the exceed ASTM D4752 Double MFK minimum 100 rubs.
face. Face and core assembly mounted with internal This test demonstrates METALAIRE products ability to
spring clips or other mechanical fastening devices are withstand continuous cleaning with harsh cleaners and
not acceptable. Units shall include stainless steel safety disinfectants. Following are the ASTM specifications for
chains attaching the face assembly to the backpan. physical properties.
Core and face assembly shall be removable to allow ASTM D523-89 Gloss 60 Degree 70-80
access to the backpan for cleaning. The face shall be ASTM D3363-92A Pencil Hardness HB-H

flush with the ceiling surface.
ASTM D3395-95 Crosshatch 4B-5B
The perforated face shall have a 51% free area, a ASTM D2794-93 Direct Impact 100 in.lb.min.
40% free area or a 23% free area.
ASTM D2794-93 Reverse Impact 60 in.lb.min.
Units shall have round inlets. Units shall be designed
to integrate into the specified ceiling system. The units
and specifications.
ENVIRONMENT
PRODUCTS
CRITICAL
HPL-CL

SERIES HPL-CL MODEL NUMBER SPECIFICATION
LAMINAR FLOW DIFFUSER
HPL-CL-AL-1 Aluminum Surface Mount 24 x 12 Standard
HPL-CL-SA-1 Stainless Steel Face/Aluminum Backpan Surface Mount 6 36 x 12 01 White
HPL-CL-SS-1 Stainless Steel Surface Mount 7 48 x 12 Stainless Steel Units Only
HPL-CL-AL-6 Aluminum T-bar 8 60 x 12 23 Satin Polish
HPL-CL-SA-6 Stainless Steel Face/Aluminum Backpan T-bar 72 x 12
HPL-CL-SS-6 Stainless Steel T-bar 6 24 x 24 Available Accessories
HPL-CL-AL-6M Aluminum T-bar Metric 7 36 x 24 D3 Aluminum Radial Opposed Blade Damper
HPL-CL-SA-6M Stainless Steel Face/Aluminum Backpan T-bar Metric 8 48 x 24 BDSS Stainless Steel Butterfly Damper
HPL-CL-SS-6M Stainless Steel T-bar Metric 9 48 x 36 EI External Insulation
10 60 x 24
12 60 x 36
14 72 x 24
72 x 36
SERIES HPL-CL PERFORMANCE DATA

HPL-CL
23% Free Area 40% Free Area 51% Free Area
CFM Per
Square Foot Ps NC Ps NC Ps NC
20 .010 <15 .005 <15 .004 <15
30 .021 <15 .011 <15 .010 <15
40 .038 18 .020 <15 .017 <15
50 .060 21 .031 21 .027 18
60 .086 29 .045 25 .038 22
70 .117 35 .061 31 .052 24
80 .152 38 .080 34 .068 30
90 .193 40 .101 39 .086 35
ENVIRONMENT
100 - - - - .107 39
PRODUCTS
CRITICAL
PERFORMANCE NOTES FOR SERIES HPL-CL

DEFINITION OF UNITS
Ps Static pressure loss through the diffuser and does not include velocity pressure
NC Based on Lw re: 10-12 watt, includes 10dB room attenuation and a maximum inlet velocity of 500fpm
HPL-CL
SERIES HPL-HA
The HPL-HA laminar flow diffuser design integrates
a HEPA filter rack accessible from the face of the
diffuser. The HPL-HA is engineered for supply air
distribution in critical environments such as hospital
operating rooms, laboratories and clean rooms.
The diffusers are engineered to supply a low velocity
piston of air.
Face and core assembly is easily removable for cleaning
and sterilization

Submittal: HPL-HA-AL
Optional
Laminar Flow gasket
Hospital Diffusers
HEPA filter available
Border 1 / Border 6 / Border 6M
Models: HPL-HA-AL-1 Aluminum Face & Backpan - Surface Mount
Available in all aluminum, stainless steel face/aluminum backpan, or all stainless steel construction
HPL-HA-AL-6 Aluminum Face & Backpan - Standard Lay in T-Bar
HPL-HA-AL-6M Aluminum Face & Backpan - Metric Sizing
2.00

Model: HPL-HA-AL (Aluminum Backpan & Face) HEPA
Duct Size - 41 Filter
Backpan
HEPA Filter Frame 3.00

Removable Perforated 9.00
Face Panel
W = Overall Width L = Overal Length
Option: HPL-HA-AL With Optional Remote Operated Opposed Blade Damper - Aluminum Backpan & Face
Transition Duct Size - 41
HEPA
Oposed Blade Damper
2.00 Filter
Backpan
23
4
HEPA Filter Frame

3.00
Removable Perforated 9.00
Face Panel
ENVIRONMENT
PRODUCTS
W = Overall Width
CRITICAL
L = Overal Length
Model: HPL-HA-AL-1 Border 1 Model: HPL-HA-AL-6 Border 6 Model: HPL-HA-AL

(Surface Mount) (Standard Lay In T-Bar) With Test Port
C = Ceiling Opening = Nominal Size
T-Bar Module = Nominal Size Test Port
3
9 3 Test Port
9
3
16
Mounting Removable Perforated Face Panel
Hole Removable Perforated
Nominal Size + 1 41 Face Panel
HPL-HA
1
T-Bar Module - 4
Model: HPL-HA-AL-6M Border 6M
Nominal Frame 1 Frame 6 Frame 6M
Size C L W L W L W
3
9 24 x 24 24 x 24 25 1/4 25 1/4 23 3/4 23 3/4 23 5/8 23 5/8
24 x 48 24 x 48 49 1/4 25 1/4 47 3/4 23 3/4 47 5/8 23 5/8


Perforated Face Perforated Face
Options Options
51% Free Area 51% Free Area
Removable Perforated Removable Perforated

Face Panel Face Panel
Cut Showing
Cut Away Section of Frame Away Section
How of Frame Showing How
The Hepa Filter Is Secured
The Hepa Filter Is Secured
1/4 " x
1/4 " x 4" Bolt / Nylon Locking 4" Bolt / Nylon Locking Nut
Nut
Mounting Bar Mounting Bar
Hepa Filter Hepa Filter

Neoprene Rubber Neoprene Rubber

Gasket Gasket
3/4 x 1/4 3/4 x 1/4
Frame 1 Frame 6F Frame 6M Cell
Closed Closed Cell
Listed
Size L W L W L W
24 x 12 25 1/4 13 1/4 23 3/4 11 3/4 23 5/8 11 5/8
24 x 24 25 1/4 25 1/4 23 3/4 23 3/4 23 5/8 23 5/8
48 x 12 49 1/4 13 1/4 47 3/4 11 3/4 47 5/8 11 5/8
48 x 24 49 1/4 25 1/4 47 3/4 23 3/4 47 5/8 23 5/8
ENVIRONMENT
PRODUCTS
CRITICAL
Frame 1 Frame 6 Frame 6M

Nominal
Size C L W L W L W
HPL-HA
18 x 18 18 x 18 19 1/4 19 1/4 17 3/4 17 3/4 17 5/8 17 5/8

24 x 24 24 x 24 25 1/4 25 1/4 23 3/4 23 3/4 23 5/8 23 5/8
24 x 48 24 x 48 49 1/4 25 1/4 47 3/4 23 3/4 47 5/8 23 5/8
Submittal: HPL-HA-SS
Laminar Flow Hospital Diffusers - With HEPA Filter
Models: HPL-HA-SS-1 Stainless Steel Face & Backpan - Surface Mount
HPL-HA-SS-6 Stainless Steel Face & Backpan - Standard Lay in T-Bar
HPL-HA-SS-6M Stainless Steel Face & Backpan - Special 1-1/2" Lay in T-Bar
Models: HPL-HA-SS ( Stainless Steel Backpan & Face )

Duct Size
HEPA Filter Frame HEPA Filter -41 2
Back Pan
1
92
W = Overall Width Removable Perforated Face Panel

L = Overall Length
Option: HPL-HA-SS With Remote Operated Opposed Blade Damper ( Stainless Steel Backpan & Face )
Duct Size
2
HEPA Filter Frame Transition - 41 2 34
Back Pan HEPA Filter
1
92

L = Overall Length
Model: HPL-HA-SS Border 1 ( Surface Mount ) Model: HPL-HA-SS Border 6 (Standard Lay-In T-Bar)
C = Ceiling Opening = Module Size

1 3 1
92
3 92

4
Model: HPL-HA-SS Border 6M (1 1/2 Inch Lay-In T-Bar)
1 Nominal Frame 1 Frame 1 Frame66

Frame Frame 6MFrame 6M
3 92 Nominal
Size
Size C LC L W W LL W W L LW W
18 x 18 18 x 18 19 1/4 19 1/4 17 3/4 17 3/4 17 5/8 17 5/8
18 x 18 18 x 18 19 1/4 19 1/4 17 3/4 17 3/4 17 5/8 17 5/8
Removable Perforated 24 x 24 24 x 24 25 1/4 25 1/4 23 3/4 23 3/4 23 5/8 23 5/8
Face Panel 24 x 24 24 x 24 25 1/4 25 1/4 23 3/4 23 3/4 23 5/8 23 5/8
3 24 x 48 24 x 48 49 1/4 25 1/4 47 3/4 23 3/4 47 5/8 23 5/8
T-Bar Module - 8
24 x 48 24 x 48 49 1/4 25 1/4 47 3/4 23 3/4 47 5/8 23 5/8

ENVIRONMENT
PRODUCTS
CRITICAL
Standard Finish: CD - Cable Damper HEPA - Filter. Perforated Faces are shipped
23 #2B Scratch. TP - Test Port. with 2 safety cables.
23%, 40% & 51% Perforated Face.
Round Neck Sizes Available:
6, 8, 10, 12 & 14.

HPL-HA

SERIES HPL-HA SPECIFICATIONS
LAMINAR FLOW DIFFUSER WITH FILTER Performance Specification
RACK ALUMINUM/STAINLESS STEEL The manufacturer shall provide published performance
MODEL HPL-HA-AL / HPL-HA-SA / data. Data has been tested in accordance to ANSI/
HPL-HA-SS
Air outlets shall be model HPL-HA-AL (aluminum),
HPL-HA-SA (stainless steel face/aluminum backpan) or Paint Specification
HPL-HA-SS (stainless steel) manufactured by METALAIRE. METALAIRE 01 paint finish is an anodic electro-
Diffuser shall generate a low velocity, vertical piston of deposition Melamine cross linking thermo set acrylic
discharge air. Unit shall also include an integral filter enamel finish, conforming to no less than 9 specific
section to allow for installation of a gasket type HEPA ASTM testing requirements covering a full range of
filter. Unit shall accept 3" pleated filter held in place physical properties. The 01 finish has been tested to
using a trapeze hanger system. exceed ASTM D4752 Double MFK minimum 100 rubs.
Diffuser shall be constructed of a one-piece perforated This test demonstrates METALAIRE products ability to
face and core assembly that is removable from the withstand continuous cleaning with harsh cleaners and
backpan with 1/4" turn fasteners accessible from the disinfectants. Following are the ASTM specifications for
face. Face and core assembly mounted with internal physical properties.
spring clips or other mechanical fastening devices are
ASTM D523-89 Gloss 60 Degree 70-80
not acceptable. Units shall include stainless steel safety
ASTM D3363-92A Pencil Hardness HB-H
chains attaching the face assembly to the backpan.

Core and face assembly shall be removable to allow
ASTM D2794-93 Direct Impact 100 in.lb.min.
sanitizing and allow access to the backpan for cleaning
with the core assembly removed. ASTM D2794-93 Reverse Impact 60 in.lb.min
The perforated face shall have a 51% free area, a

and specifications.
Optional 3" thick, 99.99% efficient filter on .30 microns.
ENVIRONMENT
PRODUCTS
CRITICAL
HPL-HA
SERIES HPL-HA MODEL NUMBER SPECIFICATION
HPL-HA-AL-1 Aluminum Surface Mount 24 x 12 Standard
HPL-HA-SA-1 Stainless Steel Face/Aluminum Backpan Surface Mount 6 36 x 12 01 White
HPL-HA-SS-1 Stainless Steel Surface Mount 7 48 x 12 Stainless Steel Units Only
HPL-HA-AL-6 Aluminum T-bar 8 60 x 12 23 Satin Polish
HPL-HA-SA-6 Stainless Steel Face/Aluminum Backpan T-bar 72 x 12
HPL-HA-SS-6 Stainless Steel T-bar 6 24 x 24 Available Accessories
HPL-HA-AL-6M Aluminum T-bar Metric 7 36 x 24 CD-AL Aluminum Cable Operated Damper
HPL-HA-SA-6M Stainless Steel Face/Aluminum Backpan T-bar Metric 8 48 x 24 CD-SS Stainless Steel Cable Operated Damper
HPL-HA-SS-6M Stainless Steel T-bar Metric 9 48 x 36 HEPA Gasket Type HEPA Filter
10 60 x 24 TP Test Port
12 60 x 36 EI External Insulation
14 72 x 24
72 x 36

ENVIRONMENT
PRODUCTS
CRITICAL
HPL-HA

SERIES HPL-HA PERFORMANCE DATA
HPL-HA WITHOUT HEPA FILTER
CFM Per
20 .010 <15 .005 <15 .004 <15
30 .021 <15 .011 <15 .010 <15
40 .038 18 .020 <15 .017 <15
50 .060 21 .031 21 .027 18
60 .086 29 .045 25 .038 22
70 .117 35 .061 31 .052 24
80 .152 38 .080 34 .068 30
90 .193 40 .101 39 .086 35
100 - - - - .107 39
HPL-HA WITH 3" HEPA FILTER

CFM Per
20 .150 20 .140 <20 .130 <20

30 .240 24 .230 24 .210 23
40 .340 29 .320 27 .300 26
50 .450 32 .430 32 .400 32
60 .545 36 .540 35 .480 34
70 .656 40 .650 39 .580 39
80 - - .740 42 .690 42
90 - - - - .800 44
100 - - - - - -
PERFORMANCE NOTES FOR SERIES HPL-HA

DEFINITION OF UNITS
ENVIRONMENT
NC Based on Lw re:10-12 watt, includes 10dB room attenuation and a maximum inlet velocity of 500fpm
PRODUCTS
CRITICAL
HEPA filter is a 3" deep filter, with an efficiency of 99.97% on D-3 micron particles
HPL-HA
SERIES HPL-GS
HPL-GS Laminar Flow Diffuser is engineered to
supply air in critical environments such as clean
rooms, laboratories, hospital operating rooms, and
patient isolation rooms. The diffuser provides a
means of controlling particle contamination within the
room by providing a unidirectional vertical piston
of conditioned air. The HPL-GS utilizes a 3" thick,
pleated filter element, which enables the overall
diffuser housing to be a maximum of 7" high.
Tested in accordance with IEST-RP-CC-034 and Alkermes SOP 110-03147
The standard gel seal HEPA filter is scan tested to meet an efficiency rating of 99.99%
Knife Edge Flange penetrates the HEPA filter (silicone) gel seal to provide a leak proof seal between the filter and the housing
Airtight Filter Housing construction at all joints and corners
Flush Appearance with 1/4" turn fasteners to allow easy removal of perforated face
Thumb Wheel Retainers hold the filter in housing and allow for easy room-side removal of filter
Available in aluminum, cold-rolled steel or stainless steel construction

ENVIRONMENT
PRODUCTS
CRITICAL
Inlet Size
6
8
10
12
14
HPL-GS
Frame 1 Frame 6 Frame 6M Filter Size

Nominal
Size C L W L W L W L W
24 x 24 24 x 24 25 1/4 25 1/4 23 3/4 23 3/4 23 5/8 23 5/8 20 1/8 20 1/8
24 x 48 24 x 48 49 1/4 25 1/4 47 3/4 23 3/4 47 5/8 23 5/8 20 1/8 44 1/8

SERIES HPL-GS SPECIFICATIONS
LAMINAR FLOW DIFFUSER WITH Performance Specification
FILTER RACK ALUMINUM/COLD-ROLLED The manufacturer shall provide published performance
STEEL/STAINLESS STEEL data. Data has been tested in accordance to ANSI/
MODEL HPL-GS-AL / HPL-GS-ST /
HPL-GS-SS
Air outlets shall be model HPL-GS-AL (aluminum), Paint Specification
HPL-GS-ST (cold-rolled steel) or HPL-GS-SS (stainless METALAIRE 01 paint finish is an anodic electro-
steel) manufactured by METALAIRE. Diffuser shall deposition Melamine cross linking thermo set acrylic
generate a low velocity, vertical piston of discharge air. enamel finish, conforming to no less than 9 specific
Unit shall also include an internal filter section to allow ASTM testing requirements covering a full range of
the installation and removal of a gel seal HEPA filter. physical properties. The 01 finish has been tested to
Unit shall accept 3" HEPA with filter held in place using exceed ASTM D4752 Double MFK minimum 100 rubs.
thumb wheel retaining clips. This test demonstrates METALAIRE products ability to
Diffuser shall be constructed of a one-piece perforated withstand continuous cleaning with harsh cleaners and
face and core assembly that is removable from the disinfectants. Following are the ASTM specifications for
backpan with 1/4" turn fasteners accessible from the physical properties.
face. Face and core assembly mounted with internal
not acceptable. Units shall include stainless steel safety ASTM D3363-92A Pencil Hardness HB-H
chains attaching the face assembly to the backpan. ASTM D3395-95 Crosshatch 4B-5B
Core and face assembly shall be removable to allow ASTM D2794-93 Direct Impact 100 in.lb.min.
sanitizing and allow access to the backpan for cleaning. ASTM D2794-93 Reverse Impact 60 in.lb.min
The face shall be flush with the ceiling surface.
and specifications.
ENVIRONMENT
PRODUCTS
CRITICAL
HPL-GS
SERIES HPL-GS MODEL NUMBER SPECIFICATION
Model Neck Size Module Available Finishes Available Accessories
HPL-GS-AL-1 Aluminum Surface Mount 6 24 x 24 Standard HEPA GS Gel Seal Hepa Filter
HPL-GS-ST-1 Cold Rolled Steel Surface Mount 7 48 x 24 01 White TP Test Port
HPL-GS-SS-1 Stainless Steel Surface Mount 8 Stainless Steel Units Only EI External Insulation
HPL-GS-AL-6 Aluminum T-bar 9 23 Satin Polish D Round disc damper
HPL-GS-ST-6 Cold Rolled Steel T-bar 10
HPL-GS-SS-6 Stainless Steel T-bar 12
HPL-GS-AL-6M Aluminum T-bar Metric 14
HPL-GS-ST-6M Cold Rolled Steel T-bar Metric
HPL-GS-SS-6M Stainless Steel T-bar Metric
SERIES HPL-GS PERFORMANCE DATA

HPL-GS WITHOUT HEPA FILTER
CFM Per 23% Free Area 40% Free Area 51% Free Area

20 .010 <15 .008 <15 .008 <15
30 .024 <15 .019 <15 .018 <15
40 .042 19 .033 21 .033 20
50 .060 21 .051 27 .050 24
60 .076 29 .072 33 .070 30
70 .101 35 .096 38 .090 35
HPL-GS WITH GEL SEAL HEPA FILTER
CFM Per 23% Free Area 40% Free Area 51% Free Area
40 .300 18 .285 18 .290 18
60 .449 20 .440 20 .423 20
ENVIRONMENT
80 .632 26 .604 26 .595 26
PRODUCTS
100 .792 30 .768 30 .750 30
CRITICAL
PERFORMANCE NOTES FOR SERIES HPL-GS
DEFINITION OF UNITS
HPL-GS

DIRECTIONAL FLOW DIFFUSERS
Model HPL-PR is specifically engineered to improve patient comfort in critical

health care applications such as isolation rooms and trauma centers. The
unique design provides a tent of conditioned air around the patient. PAGE 17
ENVIRONMENT
PRODUCTS
CRITICAL
SERIES HPL-PR
The HPL-PR is specifically engineered to improve
patient comfort in critical health care applications
such as isolation rooms and trauma centers. The
unique design surrounds the patient with a tent of
conditioned air while minimizing the impact of the air
velocities. The HPL-PR includes a HEPA filter rack.
Face and core assembly is easily removable for cleaning and sterilization
Optional gasket type HEPA filter available
Available in all aluminum, stainless steel face/aluminum backpan, or all stainless steel construction

ENVIRONMENT
PRODUCTS
CRITICAL

Nominal
Size C L W L W L W
12 x 36 12 x 36 37 1/8 13 1/8 35 3/4 11 3/4 35 3/4 11 3/4
12 x 48 12 x 48 49 1/8 13 1/8 47 3/4 11 3/4 47 3/4 11 3/4
HPL-PR
24 x 24 24 x 24 25 1/8 25 1/8 23 3/4 23 3/4 23 3/4 23 3/4

24 x 36 24 x 36 37 1/8 25 1/8 35 3/4 23 3/4 35 3/4 23 3/4
24 x 48 24 x 48 49 1/8 25 1/8 47 3/4 23 3/4 47 3/4 23 3/4

Submittal: HPL-HA-SA
Laminar Flow Hospital Diffusers
Models: HPL-HA-SA-1 Stainless Steel Face & Aluminum Backpan - Surface Mount
HPL-HA-SA-6 Stainless Steel Face & Aluminum Backpan - Standard Lay in T-Bar
HPL-HA-SA-6M Stainless Steel Face & Aluminum Backpan - Special 1-1/2" Lay in T-Bar
Models: HPL - HA - SA ( Stainless Steel Face & Aluminum Backpan )
HEPA Filter Frame 2 Duct Size - 41

Back Pan
HEPA Filter
3 9
Face Panel L = Overall Length
W = Overall Width
Options: HPL - HA - SA With Optional Remote Operated Opposed Blade Damper ( Stainless Steel Face & Aluminum Backpan )
Duct Size - 41 2
HEPA Filter Frame Transition 2 34
Back Pan
HEPA Filter
3 9
Face Panel L = Overall Length
W = Overall Width
Model: HPL-HA-SA Border 1 ( Surface Mount ) Model: HPL-HA-SA Border 6 (Standard Lay-In T-Bar)
3 9 3 9

4
Model: HPL-HA-SA Border 6M (1 1/2 Inch Lay-In T-Bar)

Nominal
3 9 Size C L W 1
Frame L W6
Frame L 6M
Frame W
Nominal
12 x 36 12 x 36Size 37 1/8 C 13 1/8
L 35
W 3/4 L 11 3/4
W 35
L 3/4 W 11 3/4
12 x 48 18 x 18 49 1/8
12 x 48 18 x 18 1319
1/81/4 19471/4 3/43/4 17475/83/417 5/811 3/4
3/417 3/41117
Face Panel 24 x 24 24 x 24 25 1/4 25 1/4 23 3/4 23 3/4 23 5/8 23 5/8
24 x 24 24 x 24 25 1/8 25 1/8 23 3/4 23 3/4 23 3/4 23 3/4
T-Bar Module - 3 24 x 48 24 x 48 49 1/4 25 1/4 47 3/4 23 3/4 47 5/8 23 5/8
ENVIRONMENT
8
T-Bar Module = Nominal Size 24 x 36 24 x 36 37 1/8 25 1/8 35 3/4 23 3/4 35 3/4 23 3/4
PRODUCTS

CRITICAL
24 x 48 24 x 48 49 1/8 25 1/8 47 3/4 23 3/4 47 3/4 23 3/4

Standard Finish: CD - Cable Damper. HEPA - Filter Perforated Faces are shipped
Face & Outer Frames # 23 TP - Test Port. with 2 safety cables.
Satin Polish Finish. 23%,40% & 51% Perforated Face
Backpans -08 White Phenoxy Round Neck Sizes Available:
Thermoset Finish Interior. 6, 8, 10, 12 & 14.

HPL-PR
Nominal
ENVIRONMENT
Size C L W L W L W
PRODUCTS
12 x 36 12 x 36 37 1/8 13 1/8 35 3/4 11 3/4 35 3/4 11 3/4
12 x 48 12 x 48 49 1/8 13 1/8 47 3/4 11 3/4 47 3/4 11 3/4 CRITICAL
24 x 24 24 x 24 25 1/8 25 1/8 23 3/4 23 3/4 23 3/4 23 3/4
24 x 36 24 x 36 37 1/8 25 1/8 35 3/4 23 3/4 35 3/4 23 3/4
24 x 48 24 x 48 49 1/8 25 1/8 47 3/4 23 3/4 47 3/4 23 3/4
HPL-PR

SERIES HPL-PR SPECIFICATIONS
LAMINAR FLOW PATIENT ISOLATION Performance Specification
DIFFUSER ALUMINUM/STAINLESS The manufacturer shall provide published performance
STEEL MODEL HPL-PR-AL / HPL-PR-SA / data. Data has been tested in accordance to ANSI/
HPL-PR-SS
Air outlets shall be model HPL-PR-AL (aluminum),
HPL-PR-SA (stainless steel face/aluminum backpan) or Paint Specification
HPL-PR-SS (stainless steel) manufactured by METALAIRE. METALAIRE 01 paint finish is an anodic electro-
Diffuser shall generate a low velocity, directional air deposition Melamine cross linking thermo set acrylic
pattern. Units shall be available in 1-, 2-, 3- or 4-way enamel finish, conforming to no less than 9 specific
fixed air pattern. ASTM testing requirements covering a full range of
Diffuser shall be constructed of a one-piece perforated physical properties. The 01 finish has been tested to
face and core assembly that is removable from the exceed ASTM D4752 Double MFK minimum 100 rubs.
backpan with 1/4" turn fasteners accessible from the This test demonstrates METALAIRE products ability to
face. Face and core assembly mounted with internal withstand continuous cleaning with harsh cleaners and
spring clips or other mechanical fastening devices are disinfectants. Following are the ASTM specifications for
not acceptable. Units shall include stainless steel safety physical properties.
Core and face assembly shall be removable to allow ASTM D3363-92A Pencil Hardness HB-H
sanitizing and allow access to the backpan for cleaning.

ASTM D2794-93 Reverse Impact 60 in.lb.min
40% free area or a 23% free area .
and specifications.
ENVIRONMENT
PRODUCTS
CRITICAL
HPL-PR
SERIES HPL-PR MODEL NUMBER SPECIFICATION
DIRECTIONAL FLOW DIFFUSER
HPL-PR-AL-1 Aluminum Surface Mount 24 x 12 Standard
HPL-PR-SA-1 Stainless Steel Face/Aluminum Backpan Surface Mount 6 36 x 12 01 White
HPL-PR-SS-1 Stainless Steel Surface Mount 7 48 x 12 Stainless Steel Units Only
HPL-PR-AL-6 Aluminum T-bar 8 60 x 12 23 Satin Polish
HPL-PR-SA-6 Stainless Steel Face/Aluminum Backpan T-bar 72 x 12
HPL-PR-SS-6 Stainless Steel T-bar 6 24 x 24 Air Patterns
HPL-PR-AL-6M Aluminum T-bar Metric 7 36 x 24 1W 1-Way
HPL-PR-SA-6M Stainless Steel Face/Aluminum Backpan T-bar Metric 8 48 x 24 2W 2-Way
HPL-PR-SS-6M Stainless Steel T-bar Metric 9 48 x 36 3W 3-Way
10 60 x 24 4W 4-Way
12 60 x 36
14 72 x 24 Available Accessories
72 x 36 CD-AL Aluminum Cable Operated Damper
CD-SS Stainless Steel Cable Operated Damper

HEPA Gasket Type HEPA Filter
TP Test Port
EI External Insulation
SERIES HPL-PR PERFORMANCE DATA

HPL-PR WITHOUT HEPA FILTER
CFM per Sq. Ft. 20 30 40 50 60 70 80 90 100
Ps .003 .007 .013 .020 .028 .039 .051 .064 .079
NC <17 <17 17 21 <28 34 37 40 41
Throw 1-1-3 1-1-4 1-2-6 1-3-8 2-4-10 2-5-11 3-6-13 5-8-16 6-10-20
HPL-PR WITH HEPA FILTER
ENVIRONMENT
PRODUCTS
CFM per Sq. Ft. 20 30 40 50 60 70 80 90 100
Ps .150 .240 .334 .425 .523 .625 .730 .820 - CRITICAL
NC <24 <24 29 32 35 39 42 45 -
Throw 1-1-3 1-1-4 1-2-6 1-3-8 2-4-10 2-5-11 3-6-13 5-8-16 -
PERFORMANCE NOTES FOR SERIES HPL-PR

DEFINITION OF UNITS
HPL-PR

RADIAL FLOW DIFFUSERS
Model HRD-CL radial discharge pattern diffusers are engineered to handle

large volumes of air in confined spaces with maximum comfort and low
room air velocities. The HRD-CL is an excellent choice for clean rooms
and laboratories. PAGE 23
Model HRD-HA radial flow diffusers have many of the same features as the
HRD-CL and are designed with a HEPA filter rack accessible from the face of
the diffuser. The gasket type HEPA filter is optional. PAGE 30
Model HRD-GS is an excellent choice for critical environments such as clean

rooms and laboratories when the application calls for the use of a HEPA
filter in the supply diffuser. The GS has an airtight filter housing and knife
edge flange that penetrates a gel seal HEPA filter, providing a leak proof seal
between the filter and the housing. The gel seal type HEPA filter is optional. PAGE 37
ENVIRONMENT
PRODUCTS
CRITICAL
SERIES HRD-CL
HRD-CL radial discharge pattern diffusers are engineered
for supply air distribution in critical environments such
as chemistry labs and clean rooms. The diffusers are
engineered to supply a low velocity of conditioned air in a
radial pattern from the ceiling.
Low velocity radial air pattern
Available in 90 or 180 throw
Easily removable face to allow ease of cleaning and sterilization
Choice of all aluminum, stainless steel face and aluminum backpan, or all stainless steel construction
Available in Surface Mount or T-bar frame styles
Optional inlet damper
Models: HRD - CL - AL One Way ( Aluminum Backpan & Face )

HRD - CL - AL Two Way ( Aluminum Backpan & Face )
Duct Size -

1/4 ( - 6.35 )
Back Pan
2 [50.8]
3/8 4
( 9.525 ) ( 101.6 )
L = Overall Length
Note: Damper Adjustment Thru 21" Hole In Face Plate Without Removing Face.
Model: HRD-CL-AL Border 1 ( Surface Mount ) Model: HRD-CL-AL Border 6 (Standard Lay-In T-Bar)

4 [101.6] Perforated
3/8
Face
( 9.525 )
4 [101.6] Perforated
Face
T-Bar Module - 3/8 ( 9.525 )
ENVIRONMENT
3/8 T-Bar Spacing
( 9.525 ) PRODUCTS
CRITICAL
Nominal Size + 1 41 ( 31.75 )
Model: HRD-CL-AL
Border 6M (1 1/2 Inch Lay-In T-Bar) Frame 1 Frame 6 Frame 6M
Nominal
Size L W
C L 1
Frame W L W
Frame 6 in Frame 6M
mm in mm
4 [101.6]
24 x 24 24 x 24 25 1/4 25 1/4 23 3/4 23 3/4 23 5/8 600.075 L23.63 600.075 W
Perforated Nominal
Face Size24 x 48 C24 x 48 49 1/4 25 1/4 47 3/4 23 3/4 47 5/8 1209.675
L W L W in 23.63
mm 600.075
in mm
12 x 48 12 x 48 49 1/4 12 1/4 47 3/4 11 3/4 47 5/8 1209.675 11.63 295.275
24 x 24 24 x 24 25 1/4 25 1/4 23 3/4 23 3/4 23 5/8 600.075 23.63 600.075
3/8 NOTE: Units Are Provided With Zinc Coated Non Painted
( 9.525 ) 24 x 48 24 xTurn
Quarter 48 Fastners.
49 1/4 25 1/4 47 3/4 23 3/4 47 5/8 1209.675 23.63 600.075
T-Bar Module - 3/8 ( 9.525 )
12 x 48 12 x12"x48"
NOTE: 48 49is1/4 12 1/4 with
only available 47 3/4
a One11Way
3/4 Pattern
47 5/8 1209.675 11.63 295.275
HRD-CL
T-Bar Module

Models: HRD-CL-SA One Way ( Stainless Steel Face & Aluminum Backpan )
HRD-CL-SA Two Way ( Stainless Steel Face & Aluminum Backpan )
C = Ceiling Opening
Duct Size
- 41
Back Pan
2
3
W = Overall Width 8 Removable Perforated Face Panel
L = Overall Length
Model: HRD-CL-SA Border 1 ( Surface Mount ) Model: HRD-CL-SA Border 6 (Standard Lay-In T-Bar)
Ceiling Opening = Module Size
Inside Perforated Face Inside Perforated Face
4 4
3 3
8 8
1 Outside 1 Outside
Nominal Size + 1 4 T-Bar Module - 4 Perforated Face
Perforated Face
T-Bar Module
Model: HRD-CL-SA Border 6M

(1 1/2 Inch Lay-In T-Bar) metric Sizing
Inside Perforated Face

Nominal Frame 1 Frame 6 Frame 6M
4 Size C L W L W L W
3
8 24 x 24 24 x 24 25 1/4 25 1/4 23 3/4 23 3/4 23 5/8 23 5/8
24 x 48 24 x 48 49 1/4 25 1/4 47 3/4 23 3/4 47 5/8 23 5/8
T-Bar Module - 38 Outside

Perforated Face
T-Bar Module

Nominal
Size C L W L W L W
ENVIRONMENT
PRODUCTS
24 x 24 24 x 24 25 1/4 25 1/4 23 3/4 23 3/4 23 5/8 23 5/8

CRITICAL
24 x 48 24 x 48 49 1/4 25 1/4 47 3/4 23 3/4 47 5/8 23 5/8

HRD-CL
Models: HPL-CL-SS ( Stainless Steel Backpan & Face )
Duct Size - 41
Back Pan
2

W = Overall Width
L = Overall Length
Model: HPL-CL-SS Border 1 ( Surface Mount ) Model: HPL-CL-SS Border 6 (Standard Lay-In T-Bar)
C = Ceiling Opening = Nominal Size T-Bar Module = Nominal Size

7
4 4
13 Removable Perforated Removable Perforated

1
16 Face Panel
2
Face Panel
Nominal Size + 1 41 Overall Face = T-Bar Module - 1
4
Model: HPL-CL-SS Border 6M
(1 1/2 Inch Lay-In T-Bar) Metric Sizing

T-Bar Module = Nominal Size - 15 Nominal Frame
Frame 1 1 Frame
Frame66 Frame Frame
6M 6M
8 Nominal
SizeSize C C L L WW L WW L L W W
4 24 x24
24 x 2424 x 24
24 x 24
25 1/425 1/42525
1/41/4 23
23 3/4 23 23
3/43/423 5/8
23 5/8
23 5/8 23 5/8
24 x24
48 x 4824 x 48
24 x 48
49 1/449 1/42525
1/41/4 47
47 3/4
3/4 23 23
3/43/447 5/8
47 5/8
23 5/8 23 5/8
Removable Perforated 48 x 48
12 x 1248 x 12
48 x 12
49 1/449 1/41313
1/41/4 47
47 3/4
3/4 11 11
3/43/447 5/8
47 5/8
11 5/8 11 5/8
1 Face Panel
2 24 x24
12 x 1224 x 12
24 x 12
25 1/425 1/41313
1/41/4 23
23 3/4 11 11
3/43/423 5/8
23 5/8
11 5/8 11 5/8
T-Bar Module - 38
ENVIRONMENT
PRODUCTS
CRITICAL
HRD-CL

SERIES HRD-CL SPECIFICATIONS
RADIAL FLOW DIFFUSER ALUMINUM/ Performance Specification
STAINLESS STEEL MODEL HRD-CL-AL / The manufacturer shall provide published performance
HRD-CL-SA / HRD-CL-SS data. Data has been tested in accordance to ANSI/
Air outlets shall be model HRD-CL-AL (aluminum), ASHRAE Standard 70-2006.
HRD-CL-SA (stainless steel face/aluminum backpan) or
HRD-CL-SS (stainless steel) manufactured by METALAIRE. Paint Specification
Diffuser shall include an upper and lower pressure METALAIRE 01 paint finish is an anodic electro-
chamber and shall generate a 180 (two-way) or 90 deposition Melamine cross linking thermo set acrylic
(one-way) low velocity discharge pattern. enamel finish, conforming to no less than 9 specific
Diffuser shall be constructed of a one-piece perforated ASTM testing requirements covering a full range of
face and core assembly that is removable from the physical properties. The 01 finish has been tested to
backpan with 1/4" turn fasteners accessible from the exceed ASTM D4752 Double MFK minimum 100 rubs.
face. Face and core assembly mounted with internal This test demonstrates METALAIRE products ability to
spring clips or other mechanical fastening devices are withstand continuous cleaning with harsh cleaners and
not acceptable. Units shall include stainless steel safety disinfectants. Following are the ASTM specifications for
chains attaching the face assembly to the backpan. physical properties.
Core and face assembly shall be removable to allow ASTM D523-89 Gloss 60 Degree 70-80
sanitizing and allow access to the backpan for cleaning. ASTM D3363-92A Pencil Hardness HB-H

The perforated face shall have a 51% free area. ASTM D2794-93 Direct Impact 100 in.lb.min.
Units shall have round inlets. Units shall be designed ASTM D2794-93 Reverse Impact 60 in.lb.min
shall be the size and quantity as outlined in the plans and
specifications.
ENVIRONMENT
PRODUCTS
CRITICAL
HRD-CL
SERIES HRD-CL MODEL NUMBER SPECIFICATION
RADIAL FLOW DIFFUSER
HRD-CL-AL-1 Aluminum Surface Mount 24 x 12 Standard
HRD-CL-SA-1 Stainless Steel Face/Aluminum Backpan Surface Mount 6 36 x 12 01 White
HRD-CL-SS-1 Stainless Steel Surface Mount 7 48 x 12 Stainless Steel Units Only
HRD-CL-AL-6 Aluminum T-bar 8 60 x 12 23 Satin Polish
HRD-CL-SA-6 Stainless Steel Face/Aluminum Backpan T-bar 72 x 12
HRD-CL-SS-6 Stainless Steel T-bar 6 24 x 24 Available Accessories
HRD-CL-AL-6M Aluminum T-bar Metric 7 36 x 24 D3 Aluminum Radial Opposed Blade Damper
HRD-CL-SA-6M Stainless Steel Face/Aluminum Backpan T-bar Metric 8 48 x 24 BDSS Stainless Steel Butterfly Damper
HRD-CL-SS-6M Stainless Steel T-bar Metric 9 48 x 36 EI External Insulation
10 60 x 24
12 60 x 36
14 72 x 24
72 x 36

ENVIRONMENT
PRODUCTS
CRITICAL
HRD-CL

SERIES HRD-CL PERFORMANCE
HRD-CL 2-WAY PATTERN
Module 2-Way Pattern Horizontal Spread (feet) Vertical Throw (feet)
Size
10 Deg dT 10 Deg dT 15 Deg dT 20 Deg dT
and
Inlet Size CFM Ps Pt NC 100 75 50 100 75 50 100 75 50 100 75 50
150 .019 .030 <15 0 1 3 0 1 2 0 1 2 0 1 4
200 .033 .054 15 1 1 4 0 1 3 0 1 4 1 2 5
250 .052 .084 19 1 2 5 1 2 4 1 2 5 1 3 6
24 x 24
8
300 .075 .121 23 1 3 5 1 2 4 1 2 5 2 4 6

400 .132 .214 31 2 4 6 2 3 6 2 4 6 3 5 7
500 .207 .335 39 3 5 7 2 4 6 3 5 7 4 6 8
250 .023 .036 <15 1 2 5 0 0 1 1 1 3 0 1 3
325 .039 .061 <15 1 3 6 0 1 2 1 2 4 1 1 4
400 .092 .145 29 3 5 10 1 1 4 2 3 6 1 3 6
24 x 24
10
475 .133 .208 36 4 6 11 1 2 5 2 3 7 2 3 7

550 .181 .284 41 5 7 12 1 3 6 3 4 7 2 4 8
625 .299 .469 45 6 9 14 2 4 8 3 5 8 3 5 9
300 .017 .030 <15 1 2 5 0 0 1 0 1 2 0 1 2
400 .028 .050 <15 1 3 6 0 0 2 1 2 3 0 1 3

500 .067 .119 26 3 5 10 1 1 4 2 2 5 1 2 5
24 x 48
10
600 .096 .172 33 4 6 11 1 2 4 2 3 6 1 3 6

800 .131 .234 38 5 7 12 1 2 5 2 3 6 2 3 7
900 .217 .387 42 6 9 14 2 3 6 3 4 7 3 4 8
500 .067 .092 19 3 5 10 1 1 4 1 1 5 1 3 6
600 .096 .133 25 4 6 11 1 2 4 1 2 6 2 3 7
700 .131 .181 30 5 7 12 1 3 5 1 3 7 2 4 8
24 x 48
12
800 .171 .236 33 5 8 13 2 3 7 2 4 7 3 5 9

900 .217 .299 39 6 9 14 2 3 7 2 4 8 3 5 9
1000 .268 .369 42 3 5 10 2 4 7 3 5 8 4 6 10
ENVIRONMENT
PRODUCTS
CRITICAL
HRD-CL
SERIES HRD-CL PERFORMANCE
HRD-CL 2-WAY PATTERN
Size
and
150 .019 .030 <15 0 1 3 0 1 2 0 1 2 0 1 4
200 .033 .054 15 1 1 4 0 1 3 0 1 4 1 2 5
250 .052 .084 19 1 2 5 1 2 4 1 2 5 1 3 6
24 x 24
8
300 .075 .121 23 1 3 5 1 2 4 1 2 5 2 4 6

400 .132 .214 31 2 4 6 2 3 6 2 4 6 3 5 7
500 .207 .335 39 3 5 7 2 4 6 3 5 7 4 6 8
250 .023 .036 <15 1 2 5 0 0 1 1 1 3 0 1 3
325 .039 .061 <15 1 3 6 0 1 2 1 2 4 1 1 4
400 .092 .145 29 3 5 10 1 1 4 2 3 6 1 3 6
24 x 24
10
475 .133 .208 36 4 6 11 1 2 5 2 3 7 2 3 7

550 .181 .284 41 5 7 12 1 3 6 3 4 7 2 4 8
625 .299 .469 45 6 9 14 2 4 8 3 5 8 3 5 9
300 .017 .030 <15 1 2 5 0 0 1 0 1 2 0 1 2

400 .028 .050 <15 1 3 6 0 0 2 1 2 3 0 1 3
500 .067 .119 26 3 5 10 1 1 4 2 2 5 1 2 5
24 x 48
10
600 .096 .172 33 4 6 11 1 2 4 2 3 6 1 3 6

800 .131 .234 38 5 7 12 1 2 5 2 3 6 2 3 7
900 .217 .387 42 6 9 14 2 3 6 3 4 7 3 4 8
500 .067 .092 19 3 5 10 1 1 4 1 1 5 1 3 6
600 .096 .133 25 4 6 11 1 2 4 1 2 6 2 3 7
700 .131 .181 30 5 7 12 1 3 5 1 3 7 2 4 8
24 x 48
12
800 .171 .236 33 5 8 13 2 3 7 2 4 7 3 5 9

900 .217 .299 39 6 9 14 2 3 7 2 4 8 3 5 9
1000 .268 .369 42 3 5 10 2 4 7 3 5 8 4 6 10
PERFORMANCE NOTES FOR SERIES HRD-CL
ENVIRONMENT
PRODUCTS
CRITICAL
DEFINITION OF UNITS
HRD-CL

SERIES HRD-HA
The HRD-HA radial flow diffuser design includes a gasket-
type HEPA filter rack accessible from the face of the
diffuser. The HRD-HA is engineered to provide low velocity
air in a radial pattern from the ceiling. The air flow is
designed to produce a uniform pattern preventing stagnant
zones where contaminants can linger.
Face and core assembly is easily removable for cleaning and sterilization
Optional gasket type HEPA filter available
Available in all aluminum, stainless steel face/aluminum backpan or all stainless steel
Available with 90 or 180 throw

ENVIRONMENT
PRODUCTS
CRITICAL

Nominal
Size C L W L W L W
HRD-HA
24 x 24 24 x 24 25 1/4 25 1/4 23 3/4 23 3/4 23 3/4 23 3/4

24 x 48 24 x 48 49 1/4 25 1/4 47 3/4 23 3/4 47 3/4 23 3/4
Nominal
Size C L W L W L W
24 x 24 24 x 24 25 1/4 25 1/4 23 3/4 23 3/4 23 3/4 23 3/4
ENVIRONMENT
PRODUCTS
24 x 48 24 x 48 49 1/4 25 1/4 47 3/4 23 3/4 47 3/4 23 3/4
CRITICAL
HRD-HA


Nominal
Size C L W L W L W
24 x 24 24 x 24 25 1/8 25 1/8 23 3/4v 23 3/4 23 3/4 23 3/4
ENVIRONMENT
24 x 48 24 x 48 49 1/8 25 1/8 47 3/4 23 3/4 47 3/4 23 3/4

PRODUCTS
CRITICAL
HRD-HA
SERIES HRD-HA SPECIFICATIONS
RADIAL FLOW DIFFUSER WITH FILTER Performance Specification
RACK ALUMINUM/STAINLESS STEEL The manufacturer shall provide published performance
MODEL HRD-HA-AL / HRD-HA-SA / data. Data has been tested in accordance to ANSI/
HRD-HA-SS
Air outlets shall be model HRD-HA-AL (aluminum),
HRD-HA-SA (stainless steel face/aluminum backpan) or Paint Specification
HRD-HA-SS (stainless steel) manufactured by METALAIRE. METALAIRE 01 paint finish is an anodic electro-
Diffuser shall generate a low velocity, vertical piston of deposition Melamine cross linking thermo set acrylic
discharge air. Unit shall also include an integral filter enamel finish, conforming to no less than 9 specific
section to allow for installation of a gasket type HEPA ASTM testing requirements covering a full range of
filter. Unit shall accept 3" pleated filter held in place physical properties. The 01 finish has been tested to
using a trapeze hanger system. exceed ASTM D4752 Double MFK minimum 100 rubs.
Diffuser shall be constructed of a one-piece perforated This test demonstrates METALAIRE products ability to
face and core assembly that is removable from the withstand continuous cleaning with harsh cleaners and
backpan with 1/4" turn fasteners accessible from the disinfectants. Following are the ASTM specifications for
face. Face and core assembly mounted with internal physical properties.
not acceptable. Units shall include stainless steel safety
ASTM D3363-92A Pencil Hardness HB-H

Core and face assembly shall be removable to allow
sanitizing and allow access to the backpan for cleaning.
The face shall be flush with the ceiling surface. ASTM D2794-93 Reverse Impact 60 in.lb.min

and specifications.
ENVIRONMENT
PRODUCTS
CRITICAL
HRD-HA

SERIES HRD-HA MODEL NUMBER SPECIFICATION
HRD-HA-AL-1 Aluminum Surface Mount 24 x 12 Standard
HRD-HA-SA-1 Stainless Steel Face/Aluminum Backpan Surface Mount 6 36 x 12 01 White
HRD-HA-SS-1 Stainless Steel Surface Mount 7 48 x 12 Stainless Steel Units Only
HRD-HA-AL-6 Aluminum T-bar 8 60 x 12 23 Satin Polish
HRD-HA-SA-6 Stainless Steel Face/Aluminum Backpan T-bar 72 x 12
HRD-HA-SS-6 Stainless Steel T-bar 6 24 x 24 Air Pattern
HRD-HA-AL-6M Aluminum T-bar Metric 7 36 x 24 90deg 90 Degree
HRD-HA-SA-6M Stainless Steel Face/Aluminum Backpan T-bar Metric 8 48 x 24 180deg 180 Degree
HRD-HA-SS-6M Stainless Steel T-bar Metric 9 48 x 36
10 60 x 24 Available Accessories
12 60 x 36 CD-AL Aluminum Cable Operated Damper
14 72 x 24 CD-SS Stainless Steel Cable Operated Damper
72 x 36 HEPA Gasket Type HEPA Filter
TP Test Port
EI External Insulation
ENVIRONMENT
PRODUCTS
CRITICAL
HRD-HA
SERIES HRD-HA PERFORMANCE DATA
HRD-HA 1-WAY PATTERN WITHOUT HEPA FILTER
Size
and
150 .019 .030 <15 0 1 3 0 1 2 0 1 2 0 1 4
200 .033 .054 <15 0 1 2 0 1 2 0 1 2 0 1 3
250 .052 .084 18 1 2 5 1 2 4 1 2 5 1 3 6
24 x 24
8
300 .075 .121 23 1 3 5 1 2 4 1 2 5 2 4 6

400 .133 .215 32 2 4 6 2 3 5 2 4 6 3 5 7
500 .207 .335 39 3 5 7 2 4 5 3 5 7 4 6 8
250 .021 .034 <15 1 2 5 0 0 1 1 1 3 0 1 3
325 .035 .057 <15 1 3 6 0 1 2 1 2 4 1 1 4
400 .053 .087 21 2 4 7 0 1 4 2 2 5 1 2 5
24 x 24
10
475 .075 .122 27 3 5 8 1 1 4 2 3 5 1 3 5

550 .100 .164 33 3 5 8 1 2 5 2 3 6 2 3 6
625 .130 .212 37 4 6 9 1 2 5 2 4 7 2 4 7
300 .030 .049 <15 1 2 6 0 0 2 1 2 3 0 1 3

400 .053 .087 19 2 4 7 0 1 3 1 2 5 1 1 5
500 .083 .135 28 3 5 7 1 1 4 2 3 6 1 2 6
24 x 48
10
600 .012 .185 34 4 6 8 1 2 5 2 3 7 1 3 7

800 .212 .347 40 5 7 9 1 3 6 3 5 8 2 5 10
900 .269 .439 40 6 7 10 2 3 7 3 5 9 3 6 10
500 .048 .074 19 1 2 5 1 1 4 1 1 6 1 3 6
600 .070 .106 25 1 3 6 1 2 5 1 2 7 2 4 7
700 .095 .145 30 2 3 7 1 3 6 1 3 8 2 4 9
24 x 48
12
800 .124 .189 33 2 4 8 2 3 6 2 4 9 3 5 10

900 .157 .239 39 3 4 8 2 4 7 2 5 10 4 5 11
1000 .194 .295 42 3 5 9 3 4 8 3 6 10 4 6 11
ENVIRONMENT
PRODUCTS
CRITICAL
HRD-HA

SERIES HRD-HA PERFORMANCE DATA
HRD-HA 2-WAY PATTERN WITHOUT HEPA FILTER
Size
and
150 .019 .030 <15 0 1 3 0 1 2 0 1 2 0 1 4
200 .033 .054 15 1 1 4 0 1 3 0 1 4 1 2 5
250 .052 .084 19 1 2 5 1 2 4 1 2 5 1 3 6
24 x 24
8
300 .075 .121 23 1 3 5 1 2 4 1 2 5 2 4 6

400 .132 .214 31 2 4 6 2 3 6 2 4 6 3 5 7
500 .207 .335 39 3 5 7 2 4 6 3 5 7 4 6 8
250 .023 .036 <15 1 2 5 0 0 1 1 1 3 0 1 3
325 .039 .061 <15 1 3 6 0 1 2 1 2 4 1 1 4
400 .092 .145 29 3 5 10 1 1 4 2 3 6 1 3 6
24 x 24
10
475 .133 .208 36 4 6 11 1 2 5 2 3 7 2 3 7

550 .181 .284 41 5 7 12 1 3 6 3 4 7 2 4 8
625 .299 .469 45 6 9 14 2 4 8 3 5 8 3 5 9
300 .017 .030 <15 1 2 5 0 0 1 0 1 2 0 1 2
400 .028 .050 <15 1 3 6 0 0 2 1 2 3 0 1 3

500 .067 .119 26 3 5 10 1 1 4 2 2 5 1 2 5
24 x 48
10
600 .096 .172 33 4 6 11 1 2 4 2 3 6 1 3 6

800 .131 .234 38 5 7 12 1 2 5 2 3 6 2 3 7
900 .217 .387 42 6 9 14 2 3 6 3 4 7 3 4 8
500 .067 .092 19 3 5 10 1 1 4 1 1 5 1 3 6
600 .096 .133 25 4 6 11 1 2 4 1 2 6 2 3 7
700 .131 .181 30 5 7 12 1 3 5 1 3 7 2 4 8
24 x 48
12
800 .171 .236 33 5 8 13 2 3 7 2 4 7 3 5 9

900 .217 .299 39 6 9 14 2 3 7 2 4 8 3 5 9
1000 .268 .369 42 3 5 10 2 4 7 3 5 8 4 6 10
PERFORMANCE NOTES FOR SERIES HRD-HA

ENVIRONMENT

PRODUCTS
CRITICAL
DEFINITION OF UNITS
HRD-HA
SERIES HRD-GS
HRD-GS radial discharge pattern diffuser includes a gel
seal HEPA filter rack and is engineered for supply air
distribution in critical environments such as chemistry labs
and clean rooms. The diffusers are engineered to supply
a low velocity of conditioned air in a radial pattern from
the ceiling
Low velocity radial air pattern
Available in 90 or 180 throw
Removable face to allow ease of cleaning and sterilization
Choice of all aluminum, all cold-rolled steel or all stainless steel construction
Standard 23% free area
Optional 40% free area or 51% free area
Optional gel seal type HEPA filter
Available in Surface Mount or T-bar Lay-in frame styles

ENVIRONMENT
PRODUCTS
CRITICAL
Inlet Size
6
8
10
12
14
Frame 1 Frame 6 Frame 6M Filter Size

HRD-GS
Nominal
Size C L W L W L W L W
24 x 24 24 x 24 25 1/4 25 1/4 23 3/4 23 3/4 23 5/8 23 5/8 20 1/8 20 1/8
24 x 48 24 x 48 49 1/4 25 1/4 47 3/4 23 3/4 47 5/8 23 5/8 20 1/8 44 1/8

SERIES HRD-GS SPECIFICATIONS
RADIAL FLOW DIFFUSER WITH FILTER Performance Specification
RACK ALUMINUM/COLD-ROLLED The manufacturer shall provide published performance
STEEL/STAINLESS STEEL data. Data has been tested in accordance to ANSI/
MODEL HRD-GS-AL / HRD-GS-ST /
HRD-GS-SS
Air outlets shall be model HRD-GS-AL (aluminum), Paint Specification
HRD-GS-ST (cold-rolled steel) or HRD-GS-SS (stainless METALAIRE 01 paint finish is an anodic electro-
steel) manufactured by METALAIRE. Diffuser shall deposition Melamine cross linking thermo set acrylic
generate a low velocity, vertical piston of discharge air. enamel finish, conforming to no less than 9 specific
Unit shall also include an internal filter rack to allow the ASTM testing requirements covering a full range of
installation and removal of a gel seal type HEPA filter. physical properties. The 01 finish has been tested to
Unit shall accept 3" gel seal type HEPA with filter held in exceed ASTM D4752 Double MFK minimum 100 rubs.
place using thumb wheel retaining clips. This test demonstrates METALAIRE products ability to
Diffuser shall be constructed of a one-piece perforated withstand continuous cleaning with harsh cleaners and
face and core assembly that is removable from the disinfectants. Following are the ASTM specifications for
backpan with 1/4" turn fasteners accessible from the physical properties.
face. Face and core assembly mounted with internal
not acceptable. Units shall include stainless steel safety ASTM D3363-92A Pencil Hardness HB-H
chains attaching the face assembly to the backpan. ASTM D3395-95 Crosshatch 4B-5B
Core and face assembly shall be removable to allow ASTM D2794-93 Direct Impact 100 in.lb.min.
sanitizing and allow access to the backpan for cleaning. ASTM D2794-93 Reverse Impact 60 in.lb.min
The perforated face shall have a standard 23% free area
with optional 40% free area or 51% free area.
and specifications.
ENVIRONMENT
PRODUCTS
CRITICAL
HRD-GS
SERIES HRD-GS MODEL NUMBER SPECIFICATION
RADIAL FLOW DIFFUSER
HRD-GS-AL-1 Aluminum Surface Mount 6 Standard
HRD-GS-ST-1 Cold Rolled Steel Surface Mount 7 01 White
HRD-GS-SS-1 Stainless Steel Surface Mount 8 Stainless Steel Units Only
24 x 24
HRD-GS-AL-6 Aluminum T-bar 9 23 Satin Polish
48 x 24
HRD-GS-ST-6 Cold Rolled Steel T-bar 10
HRD-GS-SS-6 Stainless Steel T-bar 12 Available Accessories
HRD-GS-AL-6M Aluminum T-bar Metric 14 HEPA GS Gel Seal Hepa Filter
HRD-GS-ST-6M Cold Rolled Steel T-bar Metric TP Test Port
HRD-GS-SS-6M Stainless Steel T-bar Metric EI External Insulation
D Round disc damper
SERIES HRD-GS PERFORMANCE DATA

HRD-GS 1-WAY PATTERN WITHOUT HEPA FILTER
Module Size 1-Way Pattern Vertical Throw (feet) Horizontal Spread (feet)
and

Inlet Size CFM Ps Pt NC 100 75 50 100 75 50
250 .058 .089 19 1 2 3 2 3 5
24 x 24 400 .130 .211 32 2 3 4 4 5 7
500 .210 .340 39 2 3 4 6 7 8
250 .024 .037 <15 0 0 1 3 4 6
24 x 24 400 .054 .088 22 0 1 2 6 7 9
550 .100 .163 33 2 3 4 8 9 10
HRD-GS 2-WAY PATTERN WITHOUT HEPA FILTER

Module Size 2-Way Pattern Vertical Throw (feet) Horizontal Spread (feet)
and
Inlet Size CFM Ps Pt NC 100 75 50 100 75 50
250 .056 .088 19 1 2 4 1 3 5
24 x 24 400 .143 .225 32 2 3 4 5 6 7
ENVIRONMENT
500 .212 .340 39 2 4 5 6 7 8 PRODUCTS
CRITICAL
250 .023 .036 <15 1 1.5 2 0 3.5 5
24 x 24 500 .087 .139 29 1 1.5 2.5 5 7 10
700 .145 .248 38 1 1.5 2.5 6 8 10
PERFORMANCE NOTES FOR SERIES HRD-GS

DEFINITION OF UNITS
HRD-GS

OPERATING ROOM SYSTEM
The METALAIRE Periflow System is intended for use in hospital operating

rooms. The compact yet efficient design provides control over particulate
matter within the operating room environment. The fully integrated system
ROOM SYSTEM
includes all of the air devices mounted in the operating room ceiling. PAGE 41
OPERATING
ENVIRONMENT
PRODUCTS
CRITICAL
PERIFLOW SYSTEM
The Periflow Operating Room System provides control
over particulate matter within the operating room
environment. This system provides the highest standard
of air cleanliness for patients undergoing minor procedures
to major surgeries.
Custom Design each system is custom designed and precisely fabricated
to accommodate the specialized mechanical needs of todays operating room
environments
Compact Design by its compact yet efficient design, the Periflow system allows
the designer the flexibility to properly provide for all the various components
competing for space above the operating room ceiling
Self-balancing the unique loop system design is self-balancing and eliminates the
need to re-calibrate after the system is set up, thus reducing startup costs
Available in all aluminum, stainless steel face and aluminum backpan and all stainless steel construction
Tested in accordance with the guidelines set forth by the Committee on Operating Room Environments
of the American College of Surgeons as published in the January, 1976 Bulletin, and meets Class 1
Microbiological Air Cleanliness guidelines
ROOM SYSTEM
OPERATING
ENVIRONMENT
PRODUCTS
CRITICAL
PERIFLOW

ROOM SYSTEM
OPERATING
Center Diffusers
Nominal Overall Foot
Plenum Size Print Over All System CFM Range
Model A B C D E F Qty Size Minimum Maximum
84 96 48 60 24 1 60 x 24 900 1620
ENVIRONMENT
104 120 48 72 24 2 36 x 24 1050 1890

PRODUCTS
CRITICAL
124 144 48 96 24 2 48 x 24 1200 2160

85 96 60 60 24 1 60 x 24 980 1760
105 120 60 96 24 2 48 x 24 1130 2030
125 144 60 96 24 2 48 x 24 1280 2300
66 72 72 A + 30 B + 30 48 36 2 36 x 24 900 1620
86 96 72 48 48 2 48 x 24 1050 1890
106 120 72 48 48 2 48 x 24 1200 2160
126 144 72 96 24 2 48 x 24 1350 2430
88 96 96 48 48 2 48 x 24 1200 2160
108 120 96 96 24 2 48 x 24 1350 2430
PERIFLOW
128 144 96 72 48 3 48 x 24 1500 2700

148 168 96 72 48 3 48 x 24 1650 2970
1010 120 120 72 48 3 48 x 24 1500 2700
1210 144 120 72 48 3 48 x 24 1650 2970
CRITICAL
OPERATING
ENVIRONMENT PERIFLOW
ROOM SYSTEM
PRODUCTS
CE43
PERIFLOW SYSTEM SPECIFICATIONS
HOSPITAL OPERATING ROOM AIR All systems shall have been tested in accordance with
DISTRIBUTION SYSTEM ALUMINUM, the Recommended Procedure for the Determination of
STAINLESS STEEL, MODEL PERIFLOW
Microbiological Air Cleanliness, as published by the
Air outlets shall be model Periflow manufactured by Committee on Operating Room Environments of the
METALAIRE. The air distribution and particle control for American College of Surgeons (January, 1976 Bulletin)
the operation room shall consist of a non-aspirating by an independent Microbiological Testing Laboratory.
center diffuser providing air supply over the operating The proposed system shall have met the requirements for
table. The air velocity from the center diffuser shall not Class 1 Microbiological Air Cleanliness as set forth in this
exceed 40 fpm at operating table height. An air curtain procedure. Copies of the Independent Laboratorys test
shall be provided from fixed, nonadjustable multiple slot report shall be provided to the engineer for prior approval.
panels surrounding the operating table. The air curtain The manufacturer shall submit a listing of 25 or more
shall not exceed 60 fpm and shall project air outward at systems of the setup as shown.
not less than a 5% angle, but no more than a 15%angle,
from the operating table. Systems that do not contain an Performance Specification
air curtain as an inherent part of their design shall not The manufacturer shall provide published performance
be acceptable. data. Data has been tested in accordance to ANSI/
All components of the system shall be of all aluminum, ASHRAE Standard 70-2006.
stainless steel face and aluminum backpan or all
stainless steel construction. Paint Specification
METALAIRE 01 paint finish is an anodic electro-
Aluminum factory supplied plenums, center and
deposition Melamine cross linking thermo set acrylic
perimeter panels shall be aluminum construction. All
ROOM SYSTEM
enamel finish, conforming to no less than 9 specific

exposed surfaces shall be supplied with a 01 white finish.
OPERATING
ASTM testing requirements covering a full range of

An unpainted finish shall not be acceptable.
physical properties. The 01 finish has been tested to
Stainless steel face and aluminum backpan factory exceed ASTM D4752 Double MFK minimum 100 rubs.
supplied plenums shall be aluminum construction and This test demonstrates METALAIRE products ability to
the faces and perimeter panels shall be stainless steel withstand continuous cleaning with harsh cleaners and
construction. All exposed surfaces shall be supplied disinfectants. Following are the ASTM specifications for
with a #23 satin polish. A painted or coated finish is not physical properties.
recommended.
Stainless steel factory supplied plenums, center and
perimeter panels shall be stainless steel construction. ASTM D3363-92A Pencil Hardness HB-H
All exposed surfaces shall be supplied with a #23 satin ASTM D3395-95 Crosshatch 4B-5B
polish. A painted or coated finish is not recommended. ASTM D2794-93 Direct Impact 100 in.lb.min.
ENVIRONMENT
Each center diffuser shall be provided with a single inlet ASTM D2794-93 Reverse Impact 60 in.lb.min.
PRODUCTS

CRITICAL
and the perimeter plenum system shall be supplied ASTM B177-100 Salt Spray 100 hours
with two connections. Systems utilizing more than ASTM D1735-92 Humidity 500 hours
two connections to the perimeter plenum shall not ASTM D870-92 Water Soak 250 hours
be acceptable.
ASTM D4752 Double MEK rubs 100
A perforated baffle supplied by the system manufacturer
shall be permanently attached to both the center and
perimeter panels to provide equal air distribution over the
diffuser face. Both center diffuser faces and perimeter
panel faces shall be retained by 1/4 turn fasteners for ease
PERIFLOW
of removal and sterilization. The manufacturer shall supply

clip-on safety cables to retain the faces after the 1/4 turn
fasteners are released.
PERIFLOW SYSTEM PERFORMANCE DATA
CENTER PANEL
CFM per sq. ft. 10 20 30 40 50 60 70 80
Ps 0.06 0.13 0.21 0.30 0.40 0.48 0.58 0.69
NC < 20 < 20 23 26 32 34 39 42
Velocity at 6-ft
20 35 50 65 70 80 90 100
(single panel)
Velocity at 6-ft
20 35 50 70 80 90 100 110
(multi-panels 1)
Velocity at 6-ft
25 40 60 80 100 110 120 130
(multi-panels 2)
PERFORMANCE NOTES FOR PERIFLOW SYSTEM CENTER PANEL

DEFINITION OF UNITS
Throw vertical throw at a 50 fpm terminal velocity and temperature differential of 15
maximum inlet velocity of 500 fpm. NC based on center panel area of 4 square feet.
To calculate NC for other panel areas, add the result of the following equation to the
NC value from table above: NC adjustment = 10 x Log (multi-panel area / 4)
ROOM SYSTEM
Multi-panels 1 - Average velocity at 6 feet for adjacent panels totaling 15 to 30 square feet
OPERATING
Multi-panels 2 - Average velocity at 6 feet for adjacent panels totaling more than 30 square feet
PERIFLOW SYSTEM PERFORMANCE DATA

PERIMETER PANEL
CFM per linear ft. 20 30 40 50 60 70 80 80
Ps 0.02 0.03 0.06 0.09 0.13 0.18 0.23 0.69
Throw (ft) 5 6 7 8 9 10 11 42
NC < 15 < 15 < 15 < 15 18 21 25 130
PERFORMANCE NOTES FOR PERIFLOW SYSTEM PERIMETER PANEL
ENVIRONMENT
PRODUCTS
DEFINITION OF UNITS CRITICAL

Throw vertical throw at a 50 fpm terminal velocity and temperature differential of 15
maximum inlet velocity of 500 fpm. NC based on center panel area of 4 square feet.
To calculate NC for other panel areas, add the result of the following equation to the
NC value from table above: NC adjustment = 10 x Log (multi-panel area / 4)

PERIFLOW

Metalaire Grille PDF

Uploaded by

Copyright:

Available Formats

Metalaire Grille PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Metalaire Grille PDF

Uploaded by

Copyright:

Available Formats

EXPERIENCE AIRE SUPERIORITY

2013 Metal Industries, Inc.

and Registers Reversible Core Grilles Security Grilles

Concentric Supply/Return Diffusers Accessories

Perforated Ceiling Diffusers

Linear Bar Grilles

PLENUM SLOT DIFFUSERS

Plenum Diffusers with high capacity fixed patterns

Light Troffer Diffusers

CRITICAL ENVIRONMENT PRODUCTS

Radial Flow Diffusers

Periflow Operating Room System

2013 Metal Industries, Inc.

Supply/Return Grilles and Registers

Spiral Duct Grilles

Heavy Duty Grilles

Reversible Core Grilles and Registers

2013 Metal Industries, Inc. GR1

Grilles and Registers Accessories

MODEL CC5 MODEL RPF

Aluminum Stamped Frame Supply

2013 Metal Industries, Inc. GR3

Aluminum/Steel Single Deflection Supply

4002M Aluminum Integral multi-shutter damper

4002SM Steel Integral multi-shutter damper

4002-AF Aluminum Air Foil Blade

4002S-AF Steel Air Foil Blade PAGE 11

Aluminum/Steel Double Deflection Supply

4004-AF Aluminum Air Foil Blade

4004S-AF Steel Air Foil Blade PAGE 11

Aluminum Curved Blade Grilles

LT/ST/LTC Single deflection - 2-way

LS3/LTC3 Single deflection 3-way

LS4 Single deflection 4-way

LM/SM/LMH Single deflection 1-way Integral multi-shutter damper

LTM/STM/LTCM/LTMH Single deflection 2-way Integral multi-shutter damper

LTC3M/LS3M Single deflection 3-way Integral multi-shutter damper

LS4M Single deflection 4-way Integral multi-shutter damper

LV/SH Double deflection 1-way

LTV/STH Double deflection 2-way PAGE 42

Aluminum Stamped Frame Return

RHE Extruded aluminum

SRH Steel PAGE 65

4002RS Steel PAGE 83

Aluminum Cube Core Return

CC15 1/2" x 1/2" x 1"

CC1 1" x 1" x 1"

CC5R-6 1/2" x 1/2" x 1/2" Removable core

CC5-TBC-6 1/2" x 1/2" x 1/2" Channel frame

Aluminum/Steel Perforated Return

SRP Steel PAGE 110

2013 Metal Industries, Inc. GR5

integral multi-shutter damper (VM). These grilles

Optional OB damper available on V and VH

Integral multi-shutter damper on VM

Face operated damper uses a standard screwdriver

2013 Metal Industries, Inc. GR7

2013 Metal Industries, Inc. GR9

SERIES V PERFORMANCE DATA