PA-28-140 Back
PA-28-140 Back
PA-28-140 Back
Spin Recovery
Altitude Sufficient For Restart? Glide Establish
Throttle Idle
Landing Site Select
No Ailerons Neutral
Electric Fuel Pump On Rudder Opposite dir of
Glide Establish Mixture Full Rich rotation
Landing Site Select Fuel Selector Fullest Tank
Control Wheel Full Forward
Mixture Cut-Off Carb Heat On
Rudder and Control Wheel
Master Switch Off Throttle Set Neutral when rotation stops.
for modifications and updates to this checklist as well as for other neat aviation stuff.
Master Switch On
Mixture Cut-Off Alternator Off
Electric Fuel Pump On
Fuel Selector Off Reduce electrical loads to a
Mixture Full Rich
Master Switch Off minimum, land as soon as
Starter Engage practical.
Throttle 1000 RPM Evacuate Aircraft
Oil Pressure Check Electrical Overload
Engine Fire In Flight Alternator Off
Engine Roughness Mixture Cut-Off Battery On
Fuel Selector Off If alternator loads are
Carb Heat On
If roughness continues Glide Establish reduced, reduce electrical
after one minute: Landing Site Select loads to a minimum, land as
Mayday Transmit 121.5 soon as pracical. Otherwise:
Carb Heat Cut-Off Off
Alternator
Mixture Adjust Magnetos Off
Battery As Required
Electric Fuel Pump On Master Switch Off Leave battery on only if
Fuel Selector Opposite Tank needed to power essential
Cabin Fire In Flight
Engine Instruments Check electrical equipment. Land
Master Switch Off as soon as practical.
Magnetos Check Off
Electrical Equipment
If operation on either mag-
Vents Open
neto is satisfactory, con-
tinue on that magneto at
reduced power with mixture
Carburetor Icing PA-28-140
On
full rich. Land as soon as
practical.
Carb Heat
Mixture Adjust CHECKLIST