Trico Catalog2014

PRODUCT
CATALOG
TOTAL LUBRICATION
MANAGEMENT SOLUTIONS
www.tricocorp. com | 800.558.7008

TABLE OF CONTENTS
Introduction to Trico. . . . . . . . . . . . . . . . . . . . . . . A1 Applicators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . J9
Constant Level Lubrication . . . . . . . . . . . . . . . . . B1 Grease Lubrication Products. . . . . . . . . . . . . . . . K1

Opto-MaticConstant Level Oilers. . . . . . . . . . . . . . . . . . . . B2B3 Streamliner Electro-Mechanical Grease Dispensers. . . . K2-K3
Breather Tubes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B4 Streamliner M 500cc Grease Dispensers. . . . . . . . . . . . . . . K4
Opto-MaticClosed System Oilers. . . . . . . . . . . . . . . . . . . . . . . B6 Streamliner Electro-Mechanical Accessories. . . . . . . . . . . . . K5
WatchdogOilers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B7 Streamliner DC Electro-Chemical Grease Dispensers. . . . . . K6
Opto Laser Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B8 Streamliner Electro-Chemical Grease Dispensers. . . . . . . . . K7
Streamliner S Grease Dispensers. . . . . . . . . . . . . . . . . . . . . . K8
Pressure Differential Products . . . . . . . . . . . . . . C1 Streamliner Mechanical Grease Dispensers. . . . . . . . . . . . . K9
Equalizer Expansion Chambers . . . . . . . . . . . . . . . . . . . . . . . . C2 Grease Meter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . K10
Selection of an Expansion Chamber . . . . . . . . . . . . . . . . . . . . C3
Central Lubrication. . . . . . . . . . . . . . . . . . . . . . . . L1
Visual Inspection Units. . . . . . . . . . . . . . . . . . . . . D1 Basic Types of Systems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L2
Sump Bottles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D2 Positive Displacement Injectors. . . . . . . . . . . . . . . . . . . . . . . . L3
Liquid Level Gauges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D3D4 Pumps for PDI Systems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L4
Viewports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D5 PM-10 & 20 Series Manual Cyclic Pumps. . . . . . . . . . . . . . . . L5
PE-10 & 12 Series Automatic Cyclic Pumps. . . . . . . . . . . . . . L6
Oil Sampling/Analysis . . . . . . . . . . . . . . . . . . . . . E1 PE-20, 22 & 24 Series Automatic Cyclic Pumps. . . . . . . . . . . L7
Oil Sampling Ports. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E2
PE-30 & PE-32 Series Automatic Cyclic Pumps . . . . . . . . . . . L8
Pitot Tube Sampling Ports. . . . . . . . . . . . . . . . . . . . . . . . . . . . . E3
PE-40 & PE-50 Series Continuous System Pumps. . . . . . . . . L9
Liquid LevelGaugeSample Ports. . . . . . . . . . . . . . . . . . . . . . . E4
Meter & Control Units. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L10
Vacuum Pump & Sampling Accessories . . . . . . . . . . . . . . . . . E5
Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L11L12
Reservoir BreatherKits. . . . . . . . . . . . . . . . . . . . . . . . . . . . E6E7
Fittings & Hoses. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L13
Moisture Removal. . . . . . . . . . . . . . . . . . . . . . . . . F1 Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L14
Watchdog Desiccant Breathers. . . . . . . . . . . . . . . . . . . . . F2F3 Technical Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L15
Watchdog EXSeries Breathers. . . . . . . . . . . . . . . . . . . . . . . . F4 Using the System Design Worksheet. . . . . . . . . . . . . . . L16L17
Watchdog R Series Breathers. . . . . . . . . . . . . . . . . . . . . . . . . F5 System Design Worksheet . . . . . . . . . . . . . . . . . . . . . . . . . . . L18
Watchdog Breather Adapters . . . . . . . . . . . . . . . . . . . . . . . . . F6 Product Selection Charts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . L19
Watchdog Oil Dryer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F7 Distribution Network Design. . . . . . . . . . . . . . . . . . . . . . L20L21
Filtration Systems. . . . . . . . . . . . . . . . . . . . . . . . . G1 Minimum Quantity Lubrication. . . . . . . . . . . . . M1

High-Viscosity Gear & Lube Oil Filtration System . . . . . . G1G2 MD-1200 Micro-Drop. . . . . . . . . . . . . . . . . . . . . . . . . . . . M2M3
Pneumatic High-Viscosity Filtration System. . . . . . . . . . . G3G4
Low-Viscosity Filtration System. . . . . . . . . . . . . . . . . . . . . G5G6
Spray Cooling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . N1
DL & DL Magnum. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N2
Drum Pump Filtration System. . . . . . . . . . . . . . . . . . . . . . G7G8
Lil Mister Systems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N3
Spectrum Visual Lubrication Management. . . . . . H1 Spraymaster. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N4
Spectrum Tags & Labels. . . . . . . . . . . . . . . . . . . . . . . . . . H2H3 SpraymasterII. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N5
Spectrum Oil Storage System. . . . . . . . . . . . . . . . . . . . . . H4H5 MistmaticCoolant Delivery Systems. . . . . . . . . . . . . . . . . . . . N6
EZI-action Drum Pumps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . H6 Coolant Delivery Systems. . . . . . . . . . . . . . . . . . . . . . . . . N7N8
Spectrum Oil Containers. . . . . . . . . . . . . . . . . . . . . . . . . H7H8
Spectrum Grease Identification Products. . . . . . . . . . . . . . . . H9
Lubricants & Coolants. . . . . . . . . . . . . . . . . . . . . O1
Tri-Cool Fluids. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . O2O3
Spectrum Opto-Matic Collars . . . . . . . . . . . . . . . . . . . . . . . . . H10
Industrial Fast Funnel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . H11 Lab Instrumentation. . . . . . . . . . . . . . . . . . . . . . . P1
Direct Reading Ferrograph . . . . . . . . . . . . . . . . . . . . . . . . . . . . P1
Safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I1 Ferrogram Maker. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P2
Oil Absorbents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I2
Ferroscope FS-6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P3
Gravity Feed Oilers. . . . . . . . . . . . . . . . . . . . . . . . J1 Digital Camera. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P4
Gravity Feed Oilers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . J2
Atlas Gravity Feed Oilers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . J3
Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Q1
PC Oil Cup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . J4
Vari-Feed Wick Oilers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . J5
In the selection charts on the following pages, units with inch threads are
D & DE Full Flow Dispensers . . . . . . . . . . . . . . . . . . . . . . . . . . . J6
indicated with red model numbers, and metric units with green model numbers.
V Series Valves & VM Manifolds. . . . . . . . . . . . . . . . . . . . . . . . . J7
ST Series Valves & S Series Applicator . . . . . . . . . . . . . . . . . . . J8
Trico reserves the right to change product specifications without prior notice.
Cat. No. 60007 11/12 Copyright Trico Corp. 2014
1235 Hickory Street, Pewaukee, WI 53072 | Phone 800.558.7008 / 262.691.9336 | FAX 262.691.2576 | www.tricocorp.com
A1
TOTAL LUBRICATION MANAGEMENT SOLUTIONS
TRICO: TOTAL LUBRICATION MANAGEMENT SOLUTIONS.

Tricothe worldwide leaders in predictive lubrication managementhave combined capabilities to become your complete
resource for the services and products you need to keep your equipment running productivelyaround the clock.
With facilities in Pewaukee, Wisconsin, and Cleveland, Ohio, and worldwide distribution serviceswe offer
global solutions on a local level.
Whether youre looking for an assessment of your lubrication maintenance procedures, an audit of your entire facility, training
for employees or simply the most complete line of high-performance lubrication management products in the countrywe
have your solution.
SERVICES PRODUCTS
Consulting C onstant Level Fluid Handling Systems Lab Instrumentation
Training Lubrication Gravity Feed Oilers Spray Cooling and
Auditing Desiccant Breathers Grease Lubrication Minimum Quantity
Assessments Oil Sampling Central Lubrication Lubrication
Oil Monitoring M oisture Removal Filtration Systems
and Analysis Systems and Carts
For more than 95 years, we have provided clients with a focus on industrial equipment performance and reliability. Weve done
this by combining high-performance lubrication products, with our nationally-recognized proactive lubrication management
training, auditing, and consulting programs.
www.tricocorp.com
800.558.7008
B1
INTRODUCTION TO CONSTANT LEVEL LUBRICATION
C onstant level oilers are designed to maintain a predetermined

oil level in a sump, which is necessary for proper lubrication.
If the oil level were to drop below this point, the depleted oil
would automatically be replenished by the lubricator, returning it to
its original level. With the use of constant level oilers, maintenance
efficiencies can be increased, while minimizing maintenance costs,
and the loss of production time. Direction of shaft rotation
The majority of constant level oilers available are adjustable,

allowing for use in many applications. However, there are oilers Vented constant level oiler with
available that do not allow for fluid level adjustability, eliminating side connection
potential installation errors. Typically, constant level oilers are
mounted on the side of the equipment facing the direction of shaft
rotation. Some oilers allow for bottom mounting, on the oil sump,
which prevents the oiler from misfeeding during applications that
contain currents and turbulence formed by slinger rings, discs, and
high rotating speeds.
In most cases constant level oilers are vented to the outside Direction of shaft rotation
atmosphere to work properly. Since these oilers are vented to the

atmosphere, especially in harsh, dirty environments, contaminants
are allowed to enter the lubricating oil. These contaminants are
in the forms of moisture and/or particulate which are extremely
Vented constant level oiler with
damaging to oil and equipment life. bottom connection
In order to combat the potential for oil contamination, the closed
system oiler was developed. These oilers are effective in minimizing
and eliminating the ingression of contaminants into the oil sump,
especially in dirty environments. Some closed system oilers contain
a pressure balancing line, which is connected from the headspace of
the oil sump to an air chamber built into the surge body of the oiler.
This air chamber is sealed from the outside atmosphere in order to
prevent the ingression of contaminants. Additional types of closed Direction of shaft rotation
system oilers are available that mount directly on the centerline of
the oil level to be maintained. The exchange of air between the oil
sump and the oiler is at the oilers base, which is mounted directly Closed system oiler with pressure
to the oil sump. balancing line
Several different types of constant level oilers are available to meet
specific application needs, whether it is vented or non-vented,
adjustable or nonadjustable they are an easy and effective method
of maintaining proper oil level in equipment.
Direction of shaft rotation
Closed system oiler mounted on center line

of desired oil level
www.tricocorp.com
800.558.7008
B2
OPTO-MATIC CONSTANT LEVEL OILERS
Opto-Matic Oilers provide an inexpensive method to automatically maintain a constant level of

oil in a pump bearing housing, gear box, or other oil sump applications. Throughout processing
industries, the Opto-Matic Oiler is the industry standard. Different reservoir capacities allow use in
many applications.
Stainless steel models provide long life in corrosive environments in the chemical, pulp and paper,
and mining industries.
FEATURES
One piece glass reservoir ensures proper Multiple air vent slots provide for proper
constant level function. Compared to functioning at all times
competitive models, there is no possibility
of air leakage that would cause overfilling of Large surge chamber helps prevent overflow
the bearing housing. of oil during machine start-up or shut-down
30003
Adjustable level setting allows use in many Side and bottom connections for
applications simplified installation
WIRE GUARDS
Wire guards are ordered separately and are customer installed. SPECIFICATIONS
Model No. Model No. Description Standard 316 Stainless Steel
Standard Stainless Steel
Max. Operating Temp. 250F Continuous
30012 2-1/2 oz. Guard
Reservoir One-Piece Glass Bottle
30013 30313 4 oz. Guard
Casting Zinc 316 Stainless
30016 30315 8 oz. Guard
Finish Zinc/Chromate Plated Passivated
30020 30320 16 oz. Guard
Internal Parts Zinc Plated Steel
O-ring Viton
AA AA Viton is a registered trademark of Du Pont Dow Elastomers.
SELECTION CHARTSTANDARD
B Model Connection Dimensions (in.)
Capacity
B
B No. (NPT) A B Min. B Max. C Min. C Max.
C*
C*
30002 2-1/2 oz. 1/4 2-1/2 3-15/16 4-1/4 11/32 9/16
3/
3/4
4
C*
C* 30003 4 oz. 1/4 2-11/16 5 5-3/4 9/32 1
7/
7/8
8 30005 8 oz. 1/4 3-3/16 5-15/16 6-11/16 9/32 1
No. 30002 Standard No. 30003, 30005, and
30010 Standard 30010 16 oz. 1/4 4-1/8 6-13/16 7-9/16 9/32 1
A A * Metric thread sizes available. Add -M to part number for 1/4 BSPT connection port.
* C dimensions
represent oil level range
SELECTION CHART316 STAINLESS STEEL
B Model No. With Dimensions (in.)
BB Side & Capacity Connection
(NPT)
Bottom Connect A B Min. B Max. C Min. C Max.
C*
/4
3
30213 4 oz. 1/4 2-11/16 4-15/16 5-11/16 9/32 1
C*C* 30215 8 oz. 1/4 3-3/16 5-7/8 6-5/8 9/32 1
7/
7/88
Connection Side and Bottom Stainless Steel 30220 16 oz. 1/4 4-1/8 6-3/4 7-1/2 9/32 1
* Metric thread sizes available. Add -M to part number for 1/4 BSPT connection port.
See Spectrum Opto-Matic Collars on page H10 for color coding options.
www.tricocorp.com
800.558.7008
B3
OPTO-MATIC CONSTANT LEVEL OILERS
Opto-Matic Oilers provide a constant level of oil in a

pump bearing housing, gear box, or other oil sump
applications. Different reservoir capacities allow use in
many applications.
LS, EH, and EHB models have a large surge chamber to
minimize potential of leakage during oil surge conditions.
FEATURES
High strength, transparent, ribbed plastic reservoir
provides long life and impact resistance 30084 30024 30064
Adjustable level setting allows use in many applications
Multiple air vent slots provide for proper functioning SPECIFICATIONS
at all times Max. Operating Temp. 165F Continuous
Large surge chamber (LS, EH, and EHB models) prevents Reservoir Butyrate Plastic
overflow of oil during machine start-up or shut-down
Casting Zinc Die Cast
Side and bottom connections for simplified installation
Finish Bright Zinc Plated
Internal Parts Zinc Plated Steel
SELECTION CHARTE, EB A A
Model No. Dimensions (in.)

Capacity
Connection E EB
E EB (NPT) A B Min. B Max. C Min. C Max.
B B
30052 30062 2 oz. 1/4 1-15/16 3-7/8 4-3/8 1/4 3/4 C* 1 3/32 C* 1 3/32
30054 30064 4 oz. 1/4 2-5/16 4-9/16 5-1/16 1/4 3/4

30058 30068 8 oz. 1/4 2-5/8 5-11/16 6-3/16 1/4 3/4 3/4 3/4
* Metric thread sizes available. Add -M to part number for 1/4 BSPT connection port.
A A
SELECTION CHARTEH, EHB (large surge chamber) EH EHB

Model No. Dimensions (in.)
Connection
Capacity
EH EHB (NPT) A B Min. B Max. C Min. C Max. B B
2 11/32 2 11/32
30072 30082 2 oz. 1/4 1-15/16 5 5-1/2 1/4 3/4 C* C*
30074 30084 4 oz. 1/4 2-5/16 5-11/16 6-3/16 1/4 3/4
30078 30088 8 oz. 1/4 2-5/8 6-13/16 7-5/16 1/4 3/4 3/4
AA 3/4
SELECTION CHARTLS (large surge chamber)

Connection
Dimensions (in.) LS
Model No. Capacity BB
(NPT) A B Min. B Max. C Min. C Max.
* C dimensions
represent oil CC*
30024 4 oz. 1/4 2-5/16 5-7/16 6-3/16 9/32 1 level range
30028 8 oz. 1/4 2-5/8 6-9/16 7-5/16 9/32 1
* Metric thread sizes available. Add -M to part number for 1/4 BSPT connection port. /8
7
7/8
www.tricocorp.com www.tricocorp.com
800.558.7008 800.558.7008
B4
BREATHER TUBES
Breather tubes are accessories used in conjunction

with vented Opto-Matic Oilers to help eliminate
vacuums created by abnormally tight bearings
or pressures created by high speed bearings.
The breather tube helps maintain a constant
atmospheric pressure in the bearing housing.
SELECTION CHART
Model No. Description
1/8 NPT Thread

30014 Type "C"
Wick Filter
1/8 NPT Thread
30015 Type "E"
Dust Cap
Breather tubes are available for customer installed vent
30015
ports in bearing housing or piping lines.
HELPFUL TIP:
Breather tubes are ideal for use in
environments that contain minimal
contaminants. If contamination is a
concern, the Watchdog Desiccant
Breathers are an excellent choice for
removing contaminants as well as
allowing the equipment to breathe. 30014
www.tricocorp.com
800.558.7008
B5
OPTO-MATIC CLOSED SYSTEM OILERS
The Opto-Matic Closed System Oiler is designed for

all types of equipment where a constant level in an oil
sump must be maintained. The closed system design
prevents contamination and spillage. The adjustable
collar allows the oil level to be externally adjusted to the
desired level. A 1/8 NPT port is provided for a vent line
back to the housing to allow pressure balancing between
the oiler and the housing.
FEATURES
One piece glass reservoir ensures proper constant level
function. Compared to competitive models, there is no
possibility of air leakage that would cause overfilling of
the housing.
Adjustable level setting allows use in many applications
Bottom of adjusting collar indicates actual oil level
setting for easy set-up and maintenance
Side and bottom connections for simplified installation
2" sight gauge for easy viewing of oil level Tubing and fitting not included
SELECTION CHART
Dimensions (in.)
Model No. Capacity
A B Min. B Max. NPT
30203 4 oz. 2-11/16 7-1/6 7-13/16 1/4
30205 8 oz. 3-3/16 8 8-3/4 1/4
30210 16 oz. 4-1/8 8-7/8 9-5/8 1/4
SPECIFICATIONS
Reservoir One-Piece Glass Bottle Opto-Matic closed system oiler with pressure balancing line
Upper Casting Zinc
Lower Body Zinc A
Adjusting Collar Zinc

O-Ring Vilton
WIRE GUARDS
Wire guards are ordered separately and are customer installed.
B
Model No. Description 0.090" min

0.840" max
.625" Range of
30013 4 oz. Guard Adjustment
oil level
30016 8 oz. Guard setting
30020 16 oz. Guard
www.tricocorp.com
800.558.7008
B6
WATCHDOG OILERS
The Watchdog Closed System Oiler is designed for bearing housings, 31825 31831
gear boxes, and other oil sump applications. It is ideal for use in the
31804
chemical processing, power generation, pulp and paper, and utility
industries. The viewport provides visual indication of lubricant level
and condition. Mounted on the centerline of the desired oil level, these
constant level oilers do not require any adjustment or level setting.
FEATURES
Closed system design prevents
contamination and spillage
No vent line to pump bearing housing
required, simplifying installation
4 oz. reservoirs provide oil make-up
Mounts on centerline of desired
oil level, and does not require
adjustment or level setting SPECIFICATIONS
Aluminum Body Thermoplastic Body Stainless Steel Body
Integral viewport eliminates need for
additional component Body Cast Aluminum Polysulfone 316 Stainless Steel
Reservoir Glass Polysulfone Glass
Viewport Glass Polysulfone Glass
Max. Operating Temp. 325F/160C 325F/160C 325F/160C
O-Ring Viton Viton Viton
SELECTION CHART
Watchdog Oiler mounted on centerline Model Wire Dimensions (in.)
of desired oil level No. Style Capacity Connection Guard A B C
Thermoplastic Body,
31804 4 oz. 1 NPT No 5-3/4 3-9/32 1
Reservoir and Viewport
31818 4 oz. 1/2 NPT No 6-1/4 4-1/8 1/2
31820 4 oz. 3/4 NPT No 6-1/4 3-1/4 3/4
31821 4 oz. 1 NPT No 6-1/4 3-1/4 1
31822 4 oz. 3/4 BSPT No 6-1/4 4-1/8 3/4
Aluminum
31823 Body, Glass Reservoir 4 oz. 1 BSPT No 6-1/4 3-1/4 1
and Viewport
31824 4 oz. 3/4 NPT Yes 6-1/2 3-3/8 3/4
B 2-1/4 31825 4 oz. 1 NPT Yes 6-1/2 3-3/8 1
31826 4 oz. 3/4 BSPT Yes 6-1/2 4-1/8 3/4
31827 4 oz. 1 BSPT Yes 6-1/2 3-3/8 1
31831 316 Stainless Steel 4 oz. 1 NPT No 6-1/4 3-1/4 1
A Body, Glass Reservoir
31833 and Viewport 4 oz. 1 NPT Yes 6-1/2 3-3/8 1
www.tricocorp.com
800.558.7008
B7
OPTO LASER LEVEL
Tricos Opto Laser Level is an innovative tool that

allows for quick and easy installation of the Opto-Matic
Constant Level Oiler.
With the Opto Laser Level, installation of the Opto-
Matic Oiler just became more user-friendly. In
conjunction with the Opto-Matic Oiler, the Opto
Laser Level will produce an immediate impact on your
lubrication program.
Trico gives you even more with this quick, convenient
and accurate method of installing the oiler minimizing
installation, reducing downtime and eliminating
confusion. The Opto Laser Level is a must for every
maintenance department responsible for set-up and
upkeep of equipment that uses Opto-Matic Oilers.
FEATURES
Reusable The Opto Laser Level can be used to install
multiple Opto-Matics in your plant
Lightweight Weighing 0.55 lbs, this tool fits in your
hand for those hard to reach installation areas
Easy to Read Take the guess work out of installation
with laser level alignment and visual level indicators
Portable Each Opto Laser Level comes in water-tight, SPECIFICATIONS
foamed-lined, hard case with a handle for safe storage Material Aluminum Die Cast
and convenient when transporting to the installation site
Finish Powder Coated
Components Stainless Steel
Battery Type CR123
Battery Life 50 Hrs
Laser Class Class IIIA Laser Beam
SELECTION CHART
36470 Opto Laser Level with Water Tight Case
www.tricocorp.com
800.558.7008
C1
INTRODUCTION TO PRESSURE DIFFERENTIAL PRODUCTS
F
requent operation start-ups and environmental Using the following volume and temperature parameters,
temperature swings in mechanical equipment can these values can be entered into the plug-in worksheet
cause the air pressure inside oil sumps to increase and supplied at:
decrease, causing it to breathe." This breathing air, in www.tricocorp.com/technical/sizing-expansion-cham.aspx,
most cases, comes from the external atmosphere through or follow the Selection of an Expansion Chamber worksheet
vents, fill ports, seals, and anywhere the oil sump is open supplied on the following page. As shown here, a relatively
to atmosphere. This can cause debris, dirt, and moisture common occurrence can produce up to almost 183 in of
to enter the equipment attacking and breaking down the air expansion which escapes through the seals or vents.
equipments vital lubricant and ultimately reducing the life of Conversely, that 183 in needs to return to the housing when
bearings and gears. temperatures cool. That is when the damage is done.
The EQUALIZER Expansion Chamber reduces or eliminates Closing your system is the most effective way to eliminate
this breathing action by replacing the vent, providing an harmful contaminates from entering your system and the
extra 25 cubic inches of airspace, by a rolling diaphragm. Equalizer Expansion Chamber supplies the added air volume
This provides the extra air volume necessary to overcome to eliminate the need for breathing due to temperature
expansion and retracting inside the housing, eliminating fluctuations. This is especially important when used in harsh
the need for equipment to breathe contaminated and or contaminated environments and when frequent start-up
damaging external air. But, just how much of this breathing and shut-downs are necessary.
occurs? Below is a typical installation of a common piece of
equipment and the effects of temperature fluctuations.
Temp. Range of
Amount of Oil Housing (F) Total Volume in
Total Expansion
in Housing (oz) Housing (oz.)
High Low
32 110 60 128 17.81 cubic inches
www.tricocorp.com
800.558.7008
C2
EQUALIZER EXPANSION CHAMBERS
Equalizer Expansion Chambers are designed to prevent pressure increase

in closed systems. A rolling diaphragm provides a variable volume, that
when properly sized, maintains oil housing pressure at or near zero PSI.
The reduced pressure will extend seal life and help prevent leakage.
Expansion chambers also protect the integrity of closed systems by
preventing the exchange of air from the chamber to the surrounding
atmosphere. A choice of thread sizes offers flexibility to the user.
FEATURES
Made from corrosion resistant stainless steel
Controlled housing pressure extends seal life
Prevents contamination ingression to help lubricants
stay cleaner for longer life and improved performance
Full 25 cubic inch air expansion capability
Maintenance free operation Expansion Chamber
Diaphragm
HELPFUL TIP: 4-1/16
Prevention of oil contamination and

Expansion chamber at normal temperature
degradation is very often the most
reliable means of preventing equipment
failures. By minimizing the ways that Expansion Diaphragm
Chamber
contamination can enter equipment, 3-3/4
lubricant cleanliness levels are increased.

Products such as the Watchdog Oilers,
Opto-Matic Closed System Oilers,
Equalizer Expansion Chambers, and A
Watchdog Breathers, can help lubricants
remain cleaner longer. Expansion chamber at higher temperature
* For application assistance on calculating required capacities,

please contact Trico or visit our web site for an online worksheet
at www.tricocorp.com/technical/sizing-expansion-cham.aspx. SELECTION CHART
Model No. Connection (NPT) Capacity Dim. (A) (in.)
31815 3/8 25 cu. in. 7/8

31816 1/2 25 cu. in. 1
31817 3/4 25 cu. in. 1-1/4
SPECIFICATIONS
Body Stainless Steel
Diaphragm Viton
Max. Operating Temp. 350F
www.tricocorp.com
800.558.7008
C3
SELECTION OF AN EXPANSION CHAMBER
DETERMINE TOTAL AIR EXPANSION

To determine the correct expansion chamber size required for your application, obtain BEFORE STARTING,
the following data and follow the steps listed below. Please visit our website for OBTAIN THE
assistance on calculating required capacities at www.tricocorp.com/technical/sizing- FOLLOWING DATA:
expansion-cham.aspx.
1.The amount of oil, in ounces, normally in the bearing housing._________ oz.
2.Multiply above answer by 1.804 to obtain _________in (oil volume).
3
Place this value into the table below STEPS A & B in3 (oil volume).
1 Amount of Oil in Housing (oz.)
3.The temperature range of the bearing housing. High _________F Low

_________F. Place High & Low temperature in STEP C. Subtract the low from the
high and place in STEP A (high-low temp).
4.Complete STEP A. Multiply oil volume by temperature difference and coefficient
of expansion. (NOTE: .0004 is coefficient of expansion for most turbine oils).
Place answer in STEP D, in3 (oil expansion).
2 Temp. Range of Housing (F)
High
5.The total volume of the bearing housing. Many customers may not know this.
Contact your pump manufacturer for this information. _________ oz. (total Low
volume).
6.Multiply answer from above by 1.804 to obtain _________ in3 (sump volume).
3
Place this value into the table STEP B in3 (sump volume).
Total Volume in Housing (oz.)
7.Complete STEP B, subtract in3 (oil volume) from in3 (sump volume) to get in3
(air volume) and place answer in both places in STEP C, in3 (air volume).
8.Follow instructions in STEP C to get in3 (air expansion). Place answer into STEP D
in3 (air expansion).
9.Complete STEP D by adding to get in3 (total expansion), with this information you
can select the correct size expansion chamber for your application.
Multiply the volume of oil with the temperature span to get oil expansion.
STEP A in3 (oil volume) X F (high-low temp) X .0004 = in3 (oil expansion)
Subtract the oil volume from the sump volume to get air volume.
STEP B in3 (sump volume) in3 (oil volume) = in3 (air volume)
Determine the absolute temperature range for air, divide high temp + 460 by low temp +460. Multiply (air
volume) with temperature factor. Then subtract the (air volume) to get the air expansion for the maximum
STEP C change in temperature.
( high temp + 460)
in3 (air volume) X in3 (air volume) = in3 (air expansion)
( low temp + 460)
Add (oil expansion) with (air expansion) to get total expansion.

STEP D in3 (oil expansion) + in3 (air expansion) = in3 (total expansion)
www.tricocorp.com
800.558.7008
C4
CLOSED SYSTEM HOT SETUP KIT
Pressure differential between the equipment FEATURES

housing and surrounding atmosphere is a leading
cause of moisture ingression. Equipment operation Includes all necessary fittings and hardware for quick, easy installation
where housing temperature fluctuations occur All fittings are in 316 Stainless Steel for corrosion resistance
during frequent on/off running conditions, process
fluid temperature changes, outdoor use, and air
flow over the equipment create a breathing SPECIFICATIONS
condition as pressure is equalized. Model
Description
No.
This breathing condition allows moisture to
be introduced into the equipment causing the 40103 Closed System Hot Setup Kit with 4 oz Closed System Oiler
oil to absorb it at a variable rate depending on 40105 Closed System Hot Setup Kit with 8 oz Closed System Oiler
temperature, oil type, and lubricant agitation.
The Closed System Hot Setup kit is used to minimize 40110 Closed System Hot Setup Kit with 16 oz Closed System Oiler
the detrimental effects of equipment breathing.
Expansion chamber
P/N 31816 with 1/2" NPT (m)
Watchdog Oil Dryer Tube Fitting

P/N 31847 metal/glass 1/2" NPT (m) x 1.4" tubing
with wire guard
(wire guard not shown) 1/4" Stainless
Steel Tubing
Closed System
Opto-Matic Oiler
Cross Tee 4 oz30203
1/2" NPT (f) 8 oz30205
10 oz30230
Hex Nipple
1/2" NPT (f) x 1/2" NPT (f) 90 Tube Fitting (not shown)
1/8 NPT (m) x 1/4" tubing
3" Hex Nipple

1/4" NPT (m) x 1/4" NPT (m)
www.tricocorp.com
800.558.7008
D1
INTRODUCTION TO VISUAL INSPECTION UNITS
M
onitoring proper levels and the condition of operating fluids is essential in many industrial applications. Although
important, these elements are often overlooked and cause detrimental affects to the life of the fluid as well as, the
equipment it supplies. Fortunately, Trico offers products such as, viewports and liquid level gauges, which provide
an easy and accurate method for visually inspecting many types of industrial fluids. In addition, Trico also offers sump bottles
as a further means for visual inspection. These bottles function as a collection chamber for both sediments and free water that
can invade oil sump applications. Using these products in conjunction or separately, can have positive influences on fluid and
equipment costs. By taking a proactive approach and installing visual inspection products, the life of your industrial equipment
can be significantly prolonged.
Closed system liquid level gauge with pressure balancing line connected to a gearbox housing
www.tricocorp.com
800.558.7008
D2
SUMP BOTTLES
Trico sump bottles are used as collection

chambers on bearing housings and other oil sump
applications. They collect water and contaminants,
and have a drain plug for easy inspection and
removal of fluids.
FEATURES
Easy open/close drain valve
Plastic reservoirs have reinforcing ribs for long life and
impact resistance
Copper brazing of all steel connections provides long
life and leak proof design
Zinc plating resists corrosion
SPECIFICATIONS
Reservoir Butyrate Plastic
Gasket Buna-N
Materials Steel and Brass
SELECTION CHART
Model Connection Dimensions (in.)
15/16 Capacity
No. (NPT) A B
31321 2 oz. 1/8 1-15/16 2-1/16
31341 4 oz. 1/8 2-5/16 2-7/8
31342 4 oz. 1/4 2-5/16 2-7/8
B 31382 8 oz. 1/4 2-5/8 4
HELPFUL TIP:
A Oil should be clear and bright in
sump bottles. If water or sediment
is observed, remove immediately
and investigate source. Up to 70% of
equipment fails prematurely due to
contamination in lubricants.
www.tricocorp.com
800.558.7008
D3
LIQUID LEVEL GAUGES
Liquid level gauges provide easy viewing in many industrial applications.

They are ideal for bearings, transformers, and many other non-pressure
applications.
FEATURES
Guards are standard on all sights and may be rotated 360 for easy viewing
Glass tubes offer high temperature use to 250F
Wide range of mounting styles to fit most applications
Optional top caps are available
HOW TO ORDER
1. Choose the type of gauge mounting and configuration:
BG - Straight Male Thread BE - Short Male Elbow
BF - Female Elbow
SPECIFICATIONS 2. Select model number using selection charts for correct size of gauge.
Construction Brass 3. Optional top caps are available. Add the following suffixes to the part
Sight Glass number:
Seals Viton C - A cap with a 1/8 NPT port is provided for use in closed system
applications. This is a non-vented design.
F - A filter is installed in the vent cap to minimize contamination.
CLOSED SYSTEM TOP CAPS

For closed system applications, all liquid level gauges can be ordered with
a top cap that has a 1/8 NPT port for installing a pressure balancing line to
the reservoir. Contamination from water and particulate is reduced and
equipment life is prolonged.
To make this conversion, use the selection chart below to order the closed
system conversion cap. To order a new liquid level gauge with this cap
installed, add the suffix C to the part number.
TOP CAP SELECTION CHART

Tubing and fitting not included Connection
Model No. Description Gauge Size Thread Size
Closed System
13218 5/8" Glass Diameter 1/8 NPT
Conversion Cap
13218
www.tricocorp.com
800.558.7008
D4
LIQUID LEVEL GAUGES

VENT
D SELECTION CHARTSTRAIGHT
GLASS DIAM.
Dimensions (in.)
Model No.
B C A B C D HEX
BG-0150-2 1/4 1-1/2 3-1/4 5/8 13/16
HEX FLATS BG-0150-3 3/8 1-1/2 3-1/4 5/8 13/16
BG-0350-2 1/4 3-1/2 5-1/4 5/8 13/16
BG-0350-3 3/8 3-1/2 5-1/4 5/8 13/16
BG-0550-2 1/4 5-1/2 7-1/4 5/8 13/16
A - NPT
STRAIGHT BG-0550-3 3/8 5-1/2 7-1/4 5/8 13/16
BG-0550-4 1/2 5-1/2 7-3/8 5/8 7/8
BG-0750-2 1/4 7-1/2 9-1/4 5/8 13/16
VENT BG-0750-3 3/8 7-1/2 9-1/4 5/8 13/16
E
GLASS DIAM.
SELECTION CHARTSHORT ELBOW
Dimensions (in.)
B C Model No.
A B C D E Square
A - NPT BE-0150-2 1/4 1-1/2 3-1/2 1-3/4 5/8 7/8
BE-0150-3 3/8 1-1/2 3-1/2 1-3/4 5/8 7/8
BE-0350-2 1/4 3-1/2 5-1/4 1-3/4 5/8 7/8
D
BASE SQ. BE-0350-3 3/8 3-1/2 5-1/4 1-3/4 5/8 7/8
SHORT ELBOW BE-0550-2 1/4 5-1/2 7-1/4 1-3/4 5/8 7/8
BE-0550-3 3/8 5-1/2 7-1/4 1-3/4 5/8 7/8
BE-0750-2 1/4 7-1/2 9-1/4 1-3/4 5/8 7/8
BE-0750-3 3/8 7-1/2 9-1/4 1-3/4 5/8 7/8
VENT
SELECTION CHARTFEMALE ELBOW

E
GLASS Dimensions (in.)
DIAM. B Model No.
C A B C D E Square
BF-0150-3 3/8 1-1/2 3-3/4 9/16 5/8 1
BF-0350-3 3/8 3-1/2 5-3/4 9/16 5/8 1
D BF-0550-3 3/8 5-1/2 7-3/4 9/16 5/8 1
A - NPT
BF-0750-3 3/8 7-1/2 9-3/4 9/16 5/8 1
BASE SQ. FEMALE ELBOW
www.tricocorp.com
800.558.7008
D5
VIEWPORTS
To resist corrosion, these viewports are offered in zinc plated steel. The
lenses can be removed in the field for cleaning, rather than purchasing
and installing a new viewport. Extended lens design simplifies liquid
viewing, especially on small sizes.
FEATURES: 3D PLASTIC
Extended design simplifies liquid viewing, especially on small sizes
Straight protruding lens reduces distortion created by domed lenses
Removable lens allows for cleaning and servicing
Engineered thermoplastic lens for long life
Plated steel or brass bodies
SPECIFICATIONS FEATURES: GLASS

Available with or without baffles
Body Zinc Plated Steel/Brass
Removable lens allows for cleaning or servicing
Window Polysulfone/Glass
Plated steel or brass bodies
Max. Operating Temp. 300F (149C)
Max. Pressure 50 PSI
Seal Viton SELECTION CHART 3D Viewports with Plastic Lens
Model No. Dimensions
Connection
Steel Brass A B C
A C 34199 34230 1/2" NPT 7/8 1/2 1-17/32

7/16 34201 34231 3/4" NPT 1-1/8 3/4 1-9/16
B
34202 34232 1" NPT 1-15/16 1 1-11/16
SELECTION CHART Viewports with Glass Lens and Baffle

Connection
Steel Brass A B C
34305 34341 1/2 NPT 7/8 1/2 1-3/32
3-D VIEWPORTS WITH PLASTIC LENS
34306 34342 3/4 NPT 1-1/8 3/4 1-1/8
34307 34343 1 NPT 1-5/16 1 1-1/4
A 34308 34344 1-1/4 NPT 1-3/4 1-1/4 1-5/16
C 34309 34345 1-1/2 NPT 2 1-1/2 1-11/32
B
SELECTION CHART Viewports with Glass Lens and without Baffle

Connection
Steel Brass A B C
34320 34351 1/2 NPT 7/8 1/2 1-3/32
34321 34352 3/4 NPT 1-1/8 3/4 1-1/8
VIEWPORTS WITH GLASS LENS 34322 34353 1 NPT 1-5/16 1 1-1/4
34323 34354 1-1/4 NPT 1-3/4 1-1/4 1-5/16
34324 34355 1-1/2 NPT 2 1-1/2 1-11/32
www.tricocorp.com
800.558.7008
E1
INTRODUCTION TO OIL SAMPLING / ANALYSIS
OIL SAMPLING
C
ontamination of machinery lubricants is a major problem for many manufacturers. In fact, it has been stated that six to
seven percent of the gross national product ($240 Billion) is required just to repair the damage caused by mechanical
wear, which is caused by contamination. However, when contamination is controlled, the life span of a machines vital
components can be extended by as much as 50 times. Its for these reasons and many more that routine sampling is done.
The process of sampling is not only a vital and necessary function in identifying contaminants
and contamination levels, but also in understanding the current and future requirements of
the equipment and the quality of the lubricant in general. Regularly scheduled oil sampling
and analysis programs have become an increasingly important tool for uncovering information
necessary to extend the life of your equipment and oil change intervals and minimize
maintenance costs associated with oil change outs, labor, repairs and downtime.
Oil sampling technology today is making the process of collecting and analyzing samples
much more effective and accurate. Trico offers the latest sampling supplies and accessories,
including sample ports and collection devices, which are
designed to extract system and component specific samples that are both representative
and repeatable from the best diagnostic locations in the most effective ways possible.
OIL ANALYSIS
Understanding the concept of oil sampling and the benefits involved is an important part
of total lubrication management, however, reaping the benefits may require much more.
Often, it requires an intimate knowledge of the equipment, its internal design, the system
design, the present operating and environmental conditions, the ability to regularly test
samples in a safe and contaminant-free environment and recommend and implement
corrective actions as needed.
With these challenges in mind, Trico now offers services to inspect, analyze, and report on the operating conditions of entire
manufacturing facilities machinery. Trico offers technical assistance to improve, repair and/or modify equipment and lubrication
procedures to meet performance goals and offers on-site or in-house training on best-in-practice ways of implementing lubricant
screening regimens, equipment and plant assessments and lubrication management programs.
These services include:

Training - Internationally-recognized courses on Lubrication Management and Oil Analysis can bring equipment
maintenance best practices up to speed.
Assessments - Assessments are a critical step in improving the overall lubrication program within a plant. Trico assesses
and rates your current program compared to industry Best Practices. We then provide a detailed report
summarizing opportunities for improvement in key areas versus current efforts and conditions.
Audits - An audit is performed to obtain information about the specified equipment including the internal design, the
system design, the present operation and environmental conditions. Trico will gather the necessary information
and outline recommended equipment lubrication requirements.
Consulting - Tricos specialists in lubrication and PdM program implementation, documentation integration, and root
cause analysis provide practical solutions in the interest of extending asset reliability and helping people operate
more proactively.
Oil Analysis - Trico is a leading provider in predictive condition monitoring. Oil samples are taken and analyzed as a
preventative maintenance tool and/or diagnostic means to determine cause of equipment failure. Oil is tested
for a variety of critical factors including water, particulate, and wear material.
www.tricocorp.com
800.558.7008
E2
OIL SAMPLING PORTS

Where and how oil samples are collected are two of the FEATURES
most important functions of the oil sampling process. Protective cap seals against dirt and moisture
Without a representative sample, further oil analysis
Cap connected to sample port with a heavy brass chain to
efforts will be ineffective. Thats why Trico sample ports are
prevent loss
designed to draw samples from the most representative
areas from industrial equipment. Trico sample ports are also Sample directly from lubricating oil while equipment is running
designed to collect samples under the equipments typical Minimizes introduction of contamination into system
operating conditionanother important factor. Used in conjunction with proper accessories sample ports are
The collection process is a simple, fast and accurate way adaptable to pressure, static, and vacuum locations
of sampling hydraulic, lubricating, and circulating systems.
Access to systems is done through the use of a mating SAMPLE PORTS
sample port adapter. The sample port adapter screws onto
the sample port. Oil samples can then be drawn from the Port Connection
Carbon Steel Stainless Steel Dim B
(Dim A)
system and placed into a clean sampling bottle for analysis.
36100 36102 1/8 NPT M16x2
To guard against contaminating the sample and for superior
36101 36103 1/4 NPT M16x2
leak protection, Trico sampling ports all feature a check
valve and a viton o-ring seal cap.
Note: BSPT, BSPP, and O-ring boss threads are available upon request, please contact
Trico sample ports are available in several types and sizes Tricos Customer Service.
to match the varying requirements of manufacturers.
Please see below for a complete listing and specifications.
To complement the sample ports, there are a number of
sample port adapters available, as well.
36100
SPECIFICATIONS
Max. Working Pressure 9000 PSI (630 bar)
Connect Under Pressure 5800 PSI (400 bar)
PORT ADAPTERS
Model No. Port Connection (Dim C) Dim D Material
Check Valve Ball Chrome Steel
36109 Barb for 1/4 OD Tube M16x2 Plated Steel
O-Ring Viton
36133 Barb for 1/4ODTube M16x2 Plated Steel
Max. Operating Temp. -4F to 392F
36133 36109
HELPFUL TIP:
Color of cap on port adapter must be the same
as sample port, liquid level gauge pitot tubes,
and pitot tube to extract a sample (ie. gold to
gold, black to black).
www.tricocorp.com
800.558.7008
E3
PITOT TUBE SAMPLING PORTS
Tricos Pitot Tube sampling ports are designed to provide a safe, simple and effective method of sampling fluids from sumps
and non-flooded horizontal drain lines. They ensure oil samples are drawn from the most appropriate location of the sump
reservoir, and that the sample is taken from the exact location inside the system each time, which is important for maintaining
consistency in routine sampling. The thick wall tubing can be bent and directed to the ideal sampling location with the use of a
swivel adapter.
FEATURES SPECIFICATIONS
Pitot Tubes are equipped with sample ports Max. Pressure 500 PSI (34.5 bar)
Available in a variety of lengths Material Carbon Steel or Stainless Steel
Installs easily into drain, fill or sampling pipe ports Check Valve Ball Stainless Steel
Swivel options available for bent tubes in confined locations Seal Viton
Max.Operating Temp. -4F to 392F
CARBON STEEL SAMPLE PORT

AND STAINLESS STEEL TUBE
Fixed Adapter Swivel Adapter Tube Length Fitting
36204 36217 12" 1/4" NPT Male
36207 36220 18" 1/4" NPT Male
36210 36223 24" 1/4" NPT Male
STAINLESS STEEL SAMPLE PORT AND TUBE

Fixed Adapter Swivel Adapter Tube Length Fitting
36206 36219 12" 1/4" NPT Male
36209 36222 18" 1/4" NPT Male
36212 36225 24" 1/4" NPT Male
HELPFUL TIP:
Color of cap on port adapter must be the same
as pitot tube to extract a sample (ie. gold to
gold, black to black).
www.tricocorp.com
800.558.7008
E4
LIQUID LEVEL GAUGE SAMPLE PORTS
Liquid Level Gauge Sample Ports provide easy viewing of fluid levels
and oil condition in many industrial applications. They are ideal for
bearing housings and other non-pressurized applications. Liquid Level
Gauge Sample Ports include a Pitot Tube for static sampling, which
provides repetitive, representative oil sampling.
FEATURES
Guards are standard on all sights and may be rotated
360 for easy viewing of fluid level and condition
Liquid Level Gauge Sample Ports are equipped with
Pitot Tubes in lengths of 12", 18", and 24"
Level gauge sights are available in various lengths
For use with non-pressurized systems
HELPFUL TIP:
A sample port adapter must be used to draw a sample
from Tricos Liquid Level Gauge Sample Ports. Color of
cap on port adapter must be the same as Liquid Level
Gauge Sample Port to extract a sample (ie. gold to gold,
black to black). Dim C Dim B
SPECIFICATIONS
Material (Level Gauge) Brass
Material (Pitot Tube) Stainless Steel
Dim A
Sight Glass Tube Length
Seals Viton
SELECTION CHART
Pitot Tube Length Sight Length NPT Male
Dim A Dim C
12" 18" 24" Dim B Fitting
36441 36442 36443 2.00" 3-1/2" 5-1/4" 1/4"
36307 36329 36351 2.18" 5-1/2" 7-1/4" 1/4"
36308 36330 36352 2.18" 7-1/2" 9-1/4" 1/4"
36444 36445 36446 2.00" 3-1/2" 5-1/4" 3/8"
36373 36395 36417 2.00" 5-1/2" 7-1/4" 3/8"
36374 36396 36418 2.00" 7-1/2" 9-1/4" 3/8"
*Stainless steel units are available upon request, please contact Tricos Customer Service.
www.tricocorp.com
800.558.7008
E5
VACUUM PUMP AND SAMPLING ACCESSORIES
A necessary tool for extracting an oil sample from the sample port, Tricos Vacuum Pump is compact for ease of transport.
When used in combination with a sample port adapter, flexible tubing, and a 4-ounce sterilized sample bottle the user is able to
connect to any sample port for contamination free oil sampling in the most representative locations.
Trico also offers a heavy-duty Vacuum Pump model that includes a release valve.
FEATURES
Draws a vacuum of 27 inches of Hg (Mercury)
Uses 3/16" to 5/16" tubing
38-400 bottle thread
VACUUM PUMPS
36800 Vacuum Pump, Standard 36801 36800
36801 Vacuum Pump, Heavy-Duty with Release Valve
Note: Bottles sold separately. Please use oil sampling bottles 36813 and
36814 with vacuum pumps.
OIL SAMPLING BOTTLES

36812 4 oz Sample Bottle for Black Plastic Mailer
36813 4 oz Sample Bottle, Single
36814 4 oz Sample Bottle, Case of 500
36815 8 oz Sample Bottle
36813
36819 16 oz Oil Sample Purge Bottle
36821 Black Plastic Mailer for 4 oz Bottles
TUBING
Model No. Description HELPFUL TIP:
36806 1/4" OD Poly Tubing, 100 ft Roll
Prior to sending oil sample to lab,
36807 5/16" OD Poly Tubing, 100 ft Roll
mark clearly on bottle make and
36808 1/2" OD Poly Tubing, 100 ft Roll model of equipment, brand, type, and
36809 1/4" OD Poly Tubing, 500 ft Roll weight of oil and any other necessary
36810 5/16" OD Poly Tubing, 500 ft Roll details to ensure correct analysis when
36811 1/2" OD Poly Tubing, 500 ft Roll results are returned from the lab.
66216* 1/4" OD Poly Tubing, per foot
*Please specify number of feet when ordering.
www.tricocorp.com
800.558.7008
E6
RESERVOIR BREATHER KITS
Because airborne contaminants can quickly disrupt and negate your sample,
Trico offers specially designed Breather Kits. These kits feature a two-stage
breather system that utilizes a filter to block airborne particles and desiccant to
remove harmful, unwanted moisture. The system ensures a permanent closure
on all hydraulic reservoirs and makes sure the lubricating fluid remains closed
off from airborne contamination throughout the sampling process.
An optional filter reminder vacuum gauge can be used to indicate when the
filter element on the breather has become clogged.
A male quick connect can be plumbed to the 6-bolt adapter plate (this
plate replaces the standard filler/breather cap) to fit a down pipe for filling
reservoirs with new oil through a filter cart without opening the system to the
environment.
For static sampling of oil from the system reservoir, the 6-bolt adapter
plate can incorporate a sample port connected to a sample tube. The tube
conveniently extends to the middle of the fluid level in the system reservoir to
allow samples to be taken from the exact location inside the system every time.
FEATURES
Optional filter reminder indicates remaining life of filter element
Color coded desiccant changes colors indicating replacement is needed, when
maximum adsorption is reached
Optional sample port is available with sampling drop tubes of 12, 18, and 24 in length
SPECIFICATIONS DESICCANT BREATHERS

Water Capacity Desicant
Breather Size Filter Desiccant Silica Gel Volume Air Flow
(lbs) Replaceable
39102 2 microns Gold to dark green 2.31 lb 0.9 35 CFM (260 gpm of fluid No
volume exchange)
Note: Trico Watchdog and Watchdog EXSeries Breathers can be readily used with the Reservoir Breather Kits, please contact Trico for
additional information.
www.tricocorp.com
800.558.7008
E7
RESERVOIR BREATHER KITS
6 BOLT ADAPTER PLATE WITHOUT

SAMPLE PORT
Filter
Model No. Breather Size Quick Connect
Reminder
36902 39102 No N/A
36903 39102 No 1/2" Male
36904 39102 No 1/2" Female
36914 39102 Yes N/A
36915 39102 Yes 1/2" Male
36916 39102 Yes 1/2" Female
6 BOLT ADAPTER PLATE WITH SAMPLE PORT

Tube Length Filter
Breather Size Quick Connect
12" 18" 24" Reminder
36905 36908 36911 39102 No N/A
36906 36909 36912 39102 No 1/2 Male
36907 36910 36913 39102 No 1/2 Female
36917 36920 36923 39102 Yes N/A
36918 36921 36924 39102 Yes 1/2 Male
36919 36922 36925 39102 Yes 1/2 Female
FILTER REMINDER
The filter reminder indicates the service life of the filter element. The indicator allows the filter to be changed when needed,
thus avoiding unnecessary labor and premature servicing. When filter reminder indicates the need for the filter element to be
replaced, just push in the manual reset button when a new filter element is installed.
HELPFUL TIP:
Trico Watchdog and Watchdog
EXBreathers can be readily used
Normal, clean filter Indicator shows filter is
with the Reservoir Breather Kits.
clogged and needs replacing. Please call Trico for additional
information.
www.tricocorp.com
800.558.7008
F1
INTRODUCTION TO MOISTURE REMOVAL SYSTEMS
M oisture in lubricating oils is the root cause of prematurely

damaging oil and accelerating wear of machine
components. As water invades your fluids it will not only
attack the additives in the oils, destroying their beneficial properties;
but it will also cause damage to the machine surfaces through
Dissolved water
(invisible)
corrosion, and rapidly degrade the oil through increased oxidation.

By understanding the effects of water contamination, it is easy to
see the importance of moisture detection and removal.
Oil water emulsion
Once water has entered the lubricant, it can exist in one or more of (cloudy)
the following forms; dissolved, emulsified, or free water. Free water
(phase separation)
Dissolved water contains water molecules that are dispersed one- Three stages of water within a lubricating oil
by-one through the air in contact with, or within the lubricant.
This form of water is invisible to the naked eye.
Emulsified water contains microscopic pockets of water that are
dispersed in stable suspension in the oil. As the oil ages this area
of water will expand, causing the lubricant to look cloudy.
Free water is the phase separation of emulsified water.
Free water when mixed with the lubricant readily settles to the
bottom of the equipment.
The most damaging forms of water contamination, to both the
lubricant and equipment, are emulsified and free water. Therefore,
it is important to measure, and/or remove water contamination
prior to the formation of emulsified and free water.
By the time free water becomes visible, damage is
already occurring to the oil and equipment.
REMOVING WATER CONTAMINATION
A proven method of removing water contamination from lubricating
fluids is using silica gel technology. Silica gel extracts water vapor from
the air as it is drawn through a silica gel bed, as well as covering a
wide range of temperatures. Most units using silica gel technology to
remove moisture provide a fail-proof method of determining when
replacement is necessary. Trico
incorporates a visual indicator to
accomplish this. The silica gel used
changes from gold to dark green
when maximum adsorption has
been reached.
Trico provides products that will
remove moisture from lubricating
oils; however the root cause of
moisture contamination should
be identified and corrected to
Watchdog Breather installed Watchdog Breather installed on a gearbox at
maximize the life of the lubricant on a hydraulic reservoir a water treatment facility
and equipment.
www.tricocorp.com
800.558.7008
F2
WATCHDOG DESICCANT BREATHERS
Watchdog Desiccant Breathers ensure optimum protection of industrial equipment by prohibiting the entry of moisture and
particulate contamination. Contaminants enter industrial equipment as pressure differentials or fluid level changes occur. The
Watchdog Breathers are ideal for circulating oil systems, oil sumps, process tanks, storage tanks, vacuum systems, hydraulic
systems, transformer cases, or anywhere that equipment needs to be dry and clean.
Watchdog Desiccant Breathers perform two very important functions.
1. They adsorb unwanted moisture inside industrial equipment using silica gel technology. Unwanted moisture can lead to
corrosion, shortened fluid life, and additive depletion.
2. They collect airborne solid particles by means of a dual, anti-static filter system. This reduces the amount of abrasive and
damaging contaminants that create sludge build-up inside the fluid reservoir.
FEATURES
Bi-directional air flow - A 360 air flow allows air to be breathed in and out as fluid Solid Contaminant
Filter (2 m)
level changes or differential pressures occur.
Air Diffuser
Dual filtration system - A two micron filter is located at the top and bottom of the
silica gel bed. The top filter removes particle contamination from atmospheric air and 360 Air Flow
the bottom helps with dust created by the silica gel beads contacting each other.
Water vapor adsorbent - The silica gel used in the Watchdog Desiccant Breathers
adsorb up to 40% of its own weight.
Durable construction - Watchdog Desiccant Breathers are manufactured from rugged High Capacity
Water Vapor
ABS plastic and impact modified acrylic. Adsorbent
Solid Contaminant
Color indicator - When maximum adsorption is reached the silica gel turns from gold Filter (2 m)
to dark green, indicating replacement is needed.
Activated Carbon
Activated carbon - As air is expelled, it passes through activated carbon which Removes Oil Vapors
removes oil vapors, fumes, and odors (except for 39131, 39132, 39133, and 39134).
CLEAN DRY AIR
www.tricocorp.com
800.558.7008
F3
WATCHDOG DESICCANT BREATHERS
SPECIFICATIONS
Material ABS plastic and impact modified acrylic
Max. Operating Temp. -20F to 200F (-28C to 93C)
SELECTION CHART
(Desiccant Breathers)
Silica Gel Water Capacity
Model No. Height (in.) Diameter (in.) Connection Size Air Flow
Volume (fl oz)
39100 3.5 5 1" Male Friction Fit 0.8 lb. 4.91
39101 5 5 1" Male Friction Fit 1.4 lb. 8.6
20 CFM (150 gpm of fluid
39102 8 5 1" Male Friction Fit 2.7 lb. 16.56
volume exchange)
39103 8 5 1" Male NPT 2.7 lb. 16.56
39108 10 5 2" Male NPT 3.5 lb. 21.47
39131 2 2 1/2" Female NPT .08 lb. .49
39132 3.25 2 1/2" Female NPT .1 lb. .92 5 CFM (37 gpm of fluid
39133 2 3.25 1/2" Female NPT .3 lb. 1.84 volume exchange)
39134 3.25 3.25 1/2" Female NPT .5 lb. 3.06
ACCESSORIES
Adapters are ordered separately, please see Watchdog Breather Adapters page F6.
www.tricocorp.com
800.558.7008
F4
WATCHDOG EXSERIES BREATHERS
In certain extreme operating environments such as a

paper mill or in food processing where regular steam
cleaning occurs, the humidity level far exceeds normal
industrial environments. In these situations, lubricants The reusable
and other fluids stored in tanks and reservoirs need the top cap
contains the
protection of a desiccant breather even more. However, inlet and
small temperature variations draw in the humid air outlet valves
and unnecessarily reduce the life of the breather. The which protect
Watchdog EXSeries Breathers for extreme humidity the silica gel
applications incorporate two check valves, one to from excess
humidity.
control airflow into the protected reservoir and one
to control airflow out. This prolongs the life of the
desiccant by allowing
the air to flow through D
the breather only when The reusable top cap with
inlet and outlet valves
needed to protect the
allows the economic
integrity of the tank. Unlike replacement of the
a membrane system, which desiccant cartridge.
does not allow internally
generated gases and
contaminants to exit the FEATURES
system, the Watchdog EX Water Vapor Adsorbent - longer lasting desiccant formulated
Breather offers all of the specifically for maximum efficiency at humidity levels of 80%
advantages of breathing air and higher
in and out of the tank while Color Indicating - When maximum adsorption is reached the
removing water vapor and silica gel turns from gold to dark green, indicating replacement
solid particles before they is needed. The silica gel used is chemically inert, non-corrosive,
contaminate the fluid. and does not contain cobalt chloride, a heavy metal. The color
changing dye used is environmentally safe and meets all health
and safety requirements.
SPECIFICATIONS Durable Construction - Watchdog Ex Breathers are manufactured
Operating Temp. Range -20F to 200F (-28C to 93C)
from rugged ABS plastic and impact modified acrylic
Material ABS plastic and impact-modified acrylic Easy Connection - Models are available with 1 slip fit
connection which mates with the standard Watchdog Breather
Particulate Filtration Level 2 Micron Filter adapters or with a 2 male NPT connection
Check Valve Capacity .3 psi in/2.1 psi out (except for P/N Reusable Top Cap - Allows the economic replacement of the
39110: .3 psi in/.3 psi out desiccant cartridge
SELECTION CHART
Model No. Dim A Dim B Dim C Dim D Rate Airflow Water Replacement ACCESSORIES
Capacity Cartridge Number Adapters are ordered
39110 6.25 in. N/A 1/2" FNPT 3.25 in. 10 CFM 4.91 fl oz 39217 separately, please see
39111 5 in. 1.25 in. 1" slip 5 in. 20 CFM 8.6 fl oz 39218
Watchdog Breather
Adapters page F6.
39112 8 in. 1.25 in. 1" slip 5 in. 20 CFM 16.56 fl oz 39219
39113 5 in. 1.87 in. 2" MNPT 5 in. 20 CFM 8.6 fl oz 39310
39114 8 in. 1.87 in. 2" MNPT 5 in. 20 CFM 16.56 fl oz 39222
www.tricocorp.com
800.558.7008
F5
WATCHDOG RSERIES BREATHERS
The Watchdog R Series Breathers are designed

for applications where gearboxes and
reservoirs are subjected to continuous
BD
vibration such as railroad maintenance
equipment, off-road vehicles, mining
equipment, and others. The units are
easily attached to the equipment by A replacement
rugged steel pipe threads. cartridge is easily
threaded into the
When the silica gel cartridge turns from metal reinforced base.
gold to dark green, simply install a new
replacement cartridge to the reinforced
metal base.
FEATURES
Water Vapor Adsorbent - longer lasting
desiccant formulated specifically for maximum
efficiency at humidity levels of 80% and higher.
Color Indicating - When maximum adsorption is reached the
silica gel turns from gold to dark green, indicating replacement
is needed. The silica gel used is chemically inert, non-corrosive,
and does not contain cobalt chloride, a heavy metal. The color
changing dye used is environmentally safe and meets all health
and safety requirements.
Durable Construction - Watchdog R Breathers are manufactured
from rugged ABS plastic, impact modified acrylic, and metal base.
Easy Connection - Models are available with 1" and 2" rugged
steel male pipe threads. SPECIFICATIONS
Reusable Bottom Cap - Allows the economic replacement
of the desiccant cartridge. Operating Temp. Range -20F to 200F (-20C to 93C)
Particulate Filtration Level 2 micron
Material ABS plastic and steel threads
SELECTION CHART
Model No Dim A Dim B Dim C Adsorption Capacity Airflow Replacement Cartridge Number
39150 5 in 5.2 in 1" MNPT 4.91 fl oz 25 CFM 39160
39151 6.5 in 5.2 in 1" MNPT 8.6 fl oz 25 CFM 39161
39153 6 in 5.2 in 1.125" female thread 8.6 fl oz 25 CFM 39161
39156 12 in 5.2 in 2" MNPT 21.47 fl oz 25 CFM 39166
ACCESSORIES
Adapters are ordered separately, please see Watchdog Breather Adapters page F6.
www.tricocorp.com
800.558.7008
F6
WATCHDOG BREATHER ADAPTERS
ADAPTER SELECTION ADAPTER SELECTION CHART

(part numbers with male friction slip fitting)
Watchdog Desiccant Breathers are easily installed using one
of several adapters designed for different applications.
39200 Flange adapter, without mounting holes
39201 Flange adapter, with 6 ANSI mounting holes
39202 Threaded adapter, 1 NPT male x 1 slip fit
39203 Threaded adapter, 3/4 NPT male x 1 slip fit
39204 Bayonet adapter
39205 Spin-on adapter, 1-12 UNF female x 1 slip fit
39206 Spin-on adapter, 1-1/2-16 UNF female x 1 slip fit
39207 Bypass adapter
Flange Threaded Bayonet Spin-on 39216 Adapter, 1/2 NPT male x 1 slip fit
Adapter Adapter Adapter Adapter
ADAPTER SELECTION CHART

(part numbers 39131, 39132, 39133 and 39134)
Illustration Model No. T1 T2 THE BYPASS ADAPTER
39208 1/2" NPT 1/4 NPT The Bypass Adapter is designed for applications
T1
39210 1/2" NPT 3/8 NPT where there is very heavy oil mist being expelled from
the equipment.
39212 1/2" NPT 1/2" NPT
39213 1/2" NPT 3/4 NPT When air is breathed into the equipment, it passes
T2
39215 1/2" NPT 1" NPT through the Watchdog and is cleaned and dried. When
39209 1/4 NPT 1/2" NPT
the air is breathed out of the equipment it enters the
T1 Bypass adapter and is expelled to the outside without passing
39211 3/8 NPT 1/2" NPT Adapter
(P/N 39207)
back through the breather. This protects the breather
T2 39214 3/4 NPT 1/2" NPT from oil contamination.
www.tricocorp.com
800.558.7008
F7
WATCHDOG OIL DRYER
The Watchdog Oil Dryer is a non-vented system designed

to remove water vapor from the air as it is drawn
through a bed of silica gel. It is ideal for bearing housings
and other applications where moisture condensation
must be minimized.
The compact design and standard thread size are
designed to simplify installation. Equipment can be
protected from internal moisture damage when the
Watchdog Oil Dryer is installed.
31807
FEATURES
Desiccant cartridges change color to indicate when
replacement is required
31808
Cartridge replacement is simple and takes less than one minute 31848 &
Multi-purposeserves as a viewport, a fillport and an oil dryer 31849
3.28
SELECTION CHART
2.25
31807 1 NPT Polysulfone Oil Dryer with viewport
31808 1/2 NPT Polysulfone Oil Dryer without viewport
31847 1/2" Metal/Glass Oil Dryer with viewport and guard 4.75 5.72
31848 1 NPT Metal/Glass Oil Dryer with viewport
31849 1 Metal/Glass Oil Dryer with viewport & wire guard
SPECIFICATIONS 1/2 NPT

31808
31807 &
Connections 31807 31808 31848 & 31849 (NOTE: All dimensions are in inches.) 31848 1NPT
Material Polysulfone Polysulfone Glass & Aluminum
Max. Operating Temp. 325F/160C 325F/160C 325F/ 160 C
REPLACEMENTS Bearing Housing

31807
Model No. Description Oil Dryer
21841R Replacement cartridge for model number 31807

31854 1 gal refill of desiccant
Air
Oil
Viewport
www.tricocorp.com
800.558.7008
1G1
DRUM PUMP FILTRATION SYSTEM
Motor Adapter Actively filtering lubricants from storage drums can prevent
contamination related problems. Tricos Drum Pump Filtration
System can prevent contamination or remove it when used in
daily operations, including filtering oil directly from the storage
Rubber
Hand drum to fill totes and transfer containers.
Wheel
Dust Cap
The Drum Pump Filtration System provides a dispensing nozzle
for continuous flow and metering of lubricants, and a protective
rubber nozzle cap to prevent contaminates from entering the
Dispensing
Nozzle Ground nozzle when not in use. This system is capable of delivering a
Lead
flow up to 6.8 gpm and is rated for use with lubricants up to
10 Micron
Spin-on Filter
a viscosity of 7,000 SUS, depending on motor selection. The
Drum Pump Filtration System comes standard with a 10 micron
absolute Beta>200 spin-on filter element and a sealing bung
adapter. Differential pressure gauges help specify the filter
element condition and the need for replacement.
39" Pump
Tube The universal design of the Drum Pump Filtration System
integrates a quick change hand wheel design, allowing the
motor to be transferred from one Drum Pump Filtration System
to another without buying additional motors or removing the
entire apparatus. This follows industries best handling practices
Reinforced by avoiding cross contamination of different lubricant types,
PVC Tubing
reduces further particle contamination and eliminates messy
lubricant spills.
Drum Pump Filtration SystemP/N 30017
SELECTION CHART
30017 Drum Pump Filtration System
Electric Pump Motor Pneumatic Pump Motor
30018 Electric Pump Motor - 120V/60 Hz P/N 30018 or 30021 P/N 30019
30019 Pneumatic Pump Motor
30021 Electric Pump Motor - 220V/50 Hz
FEATURES
Hand wheel modular design for easy transfer of motor to other Drum Pump Filtration Systems
Clear, non-collapsible PVC for visual confirmation of flow
Differential filter gauges to indicate filter element condition and replacement
Dispensing nozzle offers a controlled solution for safe lubricant transfer
www.tricocorp.com
800.558.7008
G2
2
DRUM PUMP FILTRATION SYSTEM
SPECIFICATIONSDRUM PUMP FILTRATION

SYSTEM (P/N30017)
Type Seal-less / Centrifugal
Material Stainless Steel 316
Tube Length 39"
Max. Temp. 190F (90C)
Discharge Nozzle 3/4"
Discharge Line 1" Non-Collapsible PVC
Filter Media 10 Micron Absolute Beta>200
Replace Filter Media @ 20 PSI Differential
SPECIFICATIONSELECTRIC PUMP MOTOR

30018 30021 Pneumatic Pump Motor installed on
Electric Motor 1.10 HP @ 10,000 RPM Drum Pump Filtration System
Max. Viscosity 7,000 SUS

Electric Motor Rating 110V, 50-60 Hz, 8.5 A 220V/50Hz
Flow Rate 6.8 GPM
SPECIFICATIONSPNEUMATIC PUMP
MOTOR (P/N30019)
Pneumatic Motor 3/4 HP @ 8,000 RPM
Maximum Viscosity 3,500 SUS
Inlet Pressure 100 psi max @ 28 CFM
Stall Pressure 50 psi
Flow Rate 4.5 GPM
FILTER MEDIA
36976 36977 36978
Micron Rating 3 10 10 Electric Pump Motor installed on
Filter Type Particulate Particulate Water Drum Pump Filtration System
Media Type Synthetic Micro-Glass Synthetic Micro-Glass

Diameter 3.7 3.7 3.7
Length 8 8 8
Thread 3/4-16 UN-2B 3/4-16 UN-2B 3/4-16 UN-2B
Beta Ratio Beta 3 200 Absolute Beta 10 200 Absolute 10 micron nominal
Dirt Holding Capacity 41 grams 48 grams N/A
Water Holding Capacity N/A N/A 8 oz*
*Based on flow rate and viscosity
www.tricocorp.com
800.558.7008
G3
HIGH-VISCOSITY GEAR & LUBE OIL FILTRATION SYSTEM
In the past choices were very limited when it came to

filtering lubricants with viscosities greater than 500 SUS
@ 100F. Now Trico offers a solution with our High-
Viscosity Gear and Lube Oil Filtration System. The problem
with attempting to filter a high viscosity oil with a lower
viscosity system is that the pump and filters are not
designed to work with higher pressures required to push
high viscosity fluids through the system. As a result these
low viscosity units operate primarily in bypass mode
where little if any of the high-viscosity oil gets filtered.
That is where Tricos High-Viscosity Gear and Lube Oil

Filtration Systems comes in. These systems are specifically
designed for high-viscosity fluids associated mainly with
gear oils and can filter oils up to 7,500 SUS @ 100F (1600
cSt @ 40C).
SELECTION CHART
36970 Portable Cart System
36971 Hand-Held System
FEATURES
Hand-Held System Portable Cart System
Differential Pressure Gauges - Indicates when elements M anual Bypass Valve - Allows transfer of oil
need to be changed without filtering
High Viscosity Oil Sampling Ports - Two sampling ports High Viscosity Oil Sampling Ports - Two sampling ports
available to monitor condition of oil available to monitor condition of oil
Dual Filters - Two-stage filtration for long element life and Quad Filters - Four filter elements for increased holding capacity
pump protection Industrial Strength Tires - Wide tires capable of getting over
Compact Frame - Lightweight design provides flexibility to large grate gaps
service equipment located in hard to reach areas Differential Pressure Gauges - Indicates when elements need
Hoses - Heavy steel wire reinforced clear PVC hoses to be changed
Gear Pump - Industrial quality for long life Heavy Duty Cart - Rugged and built to last
Hose & Wand Assembly - Heavy steel wire reinforced clear
PVC hoses with 3' long metal wands
Drip Pan - Keeps work area safe and clean
www.tricocorp.com
800.558.7008
G4
HIGH-VISCOSITY GEAR & LUBE OIL FILTRATION SYSTEM
SPECIFICATIONS
Pump Type Industrial Grade Gear Pump Industrial Grade Gear Pump
Flow Capacity 1 GPM 4 GPM
Gear Pump Speed 1725 RPM 1725 RPM
Max. Inlet Vacuum 15" of Mercury 8" of Mercury
Hose Sizing @ 2ft/sec .75" Diameter Inlet @ 6' Long 1.25" Diameter @ 6' Long
Max. Operating Temperature 150F (65C) 150F (65C)
Pump By-Pass 85 psi 105 psi
Filter By-Pass 43 psi 43 psi
Max. Viscosity 1600 cSt @ 40C (7,500 SUS @ 100F) 1600 cSt @ 40C (7,500 SUS @ 100F)
Seal and Gasket Material Viton Viton
Electrical Service Required* 115 Volts, 10 Amps, Single Phase, 60 Hz 120 Volts, 20 Amps, Single Phase, 60 Hz
Weight 50 lbs 140 lbs
Dimensions 27"W x 13"D x 17"H 28"W x 21"D x 48"H
*220 Available
HAND-HELD FILTER MEDIA

36976 36977 36978
Micron Rating 3 10 10
Filter Type Particulate Particulate Water
Diameter 3.7" 3.7" 3.7"
Length 8" 8" 8
PORTABLE FILTER CART MEDIA

36972 36973 36974 36975
Micron Rating 3 10 20 10
Filter Type Particulate Particulate Particulate Water
Media Type Synthetic Micro-Glass Synthetic Micro-Glass Synthetic Micro-Glass
Diameter 5" 5" 5" 5"
Length 11" 11" 11" 11"
Thread 1-1/2-16 UN-2B 1-1/2-16 UN-2B 1-1/2-16 UN-2B 1-1/2-16 UN-2B
Beta Ratio Beta 3 200 Absolute Beta 10 200 Absolute Beta 20 200 Absolute 10 micron nominal
Dirt Holding Capacity 102 grams 120 grams 125 grams N/A
Water Holding Capacity N/A N/A N/A 16 oz*
www.tricocorp.com
800.558.7008
G5
PNEUMATIC HIGH-VISCOSITY FILTRATION SYSTEM
The Pneumatic High-Viscosity Filtration System is similar to our

standard High-Viscosity Gear and Lube Oil Filtration System except
it utilizes a positive displacement pneumatic driven motor to
transfer fluids. The Pneumatic High-Viscosity Filtration System is
ideal for high-viscosity fluids up to 7,500 SUS @100F (1600 cSt
@ 40C). It can be used for filtering new fluids during transfer and
replenishment, as well as conditioning fluids already in use. A variety
of filter element options are available to effectively remove water
and particulate contamination.
SELECTION CHART
36933 Portable Cart System
Pneumatic
Motor
FRL Filter
FEATURES
Differential Pressure Gauges - Indicates when elements M anual Bypass Valve - Allows transfer of oil without filtering
need to be changed H igh Viscosity Oil Sampling Ports - Two sampling ports
High Viscosity Oil Sampling Ports - Two sampling ports available to monitor condition of oil level
available to monitor condition of oil Q uad Filters - Four filter elements for increased holding capacity
Dual Filters - Two-stage filtration for long element life and Industrial Strength Tires - Wide tires capable of getting over
pump protection large grate gaps
Compact Frame - Lightweight design provides flexibility to D ifferential Pressure Gauges - Indicates when elements need
service equipment in hard to reach areas to be changed
Hoses - Heavy steel wire reinforced clear PVC hoses H eavy Duty Cart - Rugged and built to last
Pneumatic Motor - Air operated motor providing a flow rate H ose & Wand Assembly - Heavy steel wire reinforced clear
of 1 GPM PVC hoses with 3' long metal wands
FRL Filter - Removes debris, moisture and lubricates air to D rip Pan - Keeps work area safe and clean
prevent premature wear and failure of motor
P neumatic Motor - Air operated motor providing a flow rate
of 3 GPM
FRL Filter - Removes debris, moisture and lubricates air to
prevent premature wear and failure of motor
www.tricocorp.com
800.558.7008
G6
PNEUMATIC HIGH-VISCOSITY FILTRATION SYSTEM

SPECIFICATIONS
Pump Type Pneumatic Driven Pneumatic Driven
Flow Capacity 1 GPM 3 GPM
Air Inlet Connection 1/4" NPT Female 1/4" NPT Female
Max. Operating Pressure 100 psi 100 psi
Maximum Inlet Vacuum 15" of Mercury 8" of Mercury
Hose Sizing @ 2ft/sec .75" Diameter Inlet @ 6' Long 1.25" Diameter @ 6' Long
Max. Operating Tem 150F (65C) 150F (65C)
Pump By-Pass 85 psi 105 psi
Filter By-Pass 43 psi 43 psi
Max. Viscosity 1600 cSt @ 40C 1600 cSt @ 40C
7,500 SUS @ 100F 7,500 SUS @ 100F
Weight 49 lbs. 156 lbs.
Seals and Gasket Viton Viton

36976 36977 36978
Diameter 3.7" 3.7" 3.7"
Length 8" 8" 8"

36972 36973 36974 36975
Micron Rating 3 10 20 10
Filter Type Particulate Particulate Particulate Water
Media Type Synthetic Micro-Glass Synthetic Micro-Glass Synthetic Micro-Glass
Diameter 5" 5" 5" 5"
Length 11" 11" 11" 11"
Thread 1-1/2-16 UN-2B 1-1/2-16 UN-2B 1-1/2-16 UN-2B 1-1/2-16 UN-2B
Beta Ratio Beta 3 200 Absolute Beta 10 200 Absolute Beta 20 200 Absolute 10 micron nominal
Dirt Holding Capacity 102 grams 120 grams 125 grams N/A
Water Holding Capacity N/A N/A N/A 16 oz*
www.tricocorp.com
800.558.7008
G7
LOW-VISCOSITY FILTRATION SYSTEM
The Low-Viscosity Filtration System provides convenient off-line filtration, flushing,

conditioning, and fluid transfer of industrial oils. The Low-Viscosity Filtration Systems
are available in a cart and hand-held version. The systems are rated for use with
lubricants up to a viscosity 2,000 SUS @ 100F. For added utility, the filtration
systems feature differential pressure gauges that indicate when each of the filtration
elements needs to be changed. Two sampling ports are included as well for safely
sampling and monitoring the condition of oil.
FEATURES
O il Sampling Ports - Two sampling ports available to Bypass Valve - Allows transfer of oil without filtering
monitor condition of oil Oil Sampling Ports - Two sampling ports available to
Differential Pressure Gauges - Indicates when elements monitor condition of oil
need to be changed Manifold System - Encompasses valves and plumping in
Dual Filters - Two-stage filtration for long element life one location
and pump protection Dual Filters - Two-stage filtration for long element life
Bronze Internal Helical Gear Pump - Industrial quality and pump protection
for long life Industrial Strength Tires - Wide tires capable of getting
Compact Frame - Lightweight design provides flexibility over large grate gaps
to service equipment located in hard to reach areas Heavy Duty Cart - Rugged and built to last
Hoses - Heavy-duty reinforced clear PVC Pressure Relief Valve - Prevents over pressurizing and
damage to pump, hoses, and filter
SELECTION CHART Check Valve - Prevents fluid back flow when pump
vertically
Differential Pressure Gauges - Indicates when elements
36989 Portable Cart System need to be changed
Hose & Wand Assembly - Heavy steel wire reinforced
clear PVC hoses with 3' long metal (not shown in photo)
www.tricocorp.com
800.558.7008
G8
LOW-VISCOSITY FILTRATION SYSTEM

SPECIFICATIONS
Pump Type Bronze Internal Helical Gear Pump Steel Internal Gear Pump
Flow Capacity 5.5 GPM 14 GPM
Electric Motor Rating HP @ 1750 RPM 1-1/2 HP @ 1750 RPM
Maximum Inlet Vacuum 15" of Mercury 8" of Mercury
Hose Sizing .75" Inlet @ 6' Long / 1.0" Outlet @ 6' Long 1" Inlet and Outlet @ 6' Long
Maximum Operating Temperature 150F (65C) 150F (65C)
Pressure Relief 50 PSI 100 PSI
Maximum Viscosity 430 cSt @ 40C / 2000 SUS 430 cSt @ 40C / 2000 SUS
Seal and Gasket Material Mechanical Static Mechanical Static
Electrical Service Required 115 Volts, 8.8 Amps, Single Phase, 60 Hz 115 Volts, 15.2 Amps, Single Phase, 60 Hz
Weight 47 lbs 130 lbs

36976 36977 36978
Diameter 3.7" 3.7" 3.7"
Length 8" 8" 8"
Thread -16 UN-2B -16 UN-2B -16 UN-2B
Beta Ratio Beta 3 200 Absolute Beta 10 200 Absolute 10 Micron Nominal
* Based on flow rate and viscosity

36973 36974 36995
Diameter 5" 5" 5"
Length 11" 11" 11"
Thread 1-1/2-16 UN-2B 1-1/2-16 UN-2B 1-1/2-16 UN-2B
Beta Ratio Beta 10 200 Absolute Beta 20 200 Absolute Beta 25 200 Absolute
* Based on flow rate and viscosity
www.tricocorp.com
800.558.7008
H1
SPECTRUM VISUAL LUBRICATION MANAGEMENT
A SOLUTION TO MANAGING LUBRICANTS FROM

STORAGE TO POINT OF USE
The Spectrum Visual Lubrication Management System uses color coding to ensure the
correct lubricant is used in the right piece of equipment, and in the proper location.
Colored identifiers can be assigned to designated lubricants. Assigning specific colors
allows for a tagging system to be deployed throughout the lubricant chain within the
facility. From the point of storage to the point of application, the operator will know which
designated lubricant is to go to each specific lubrication point. Color coding lubricants from
the time they enter the facility to the point of use will reduce the amount of lubricant cross
contamination that occurs in everyday top-ups, re-lubrication, and re-greasing activities. A Spectrum Tags and Labels being
deployed throughout lube room
simple system like this will assist in helping personnel understand the internal supply chain
ensuring that the right lubricant gets to the right application.
Spectrum Visual Lubrication Management Products include:
Compressor being filled with a

Spectrum Container using the
hand pump
1. S pectrum Wall Charts - Spectrum Wall Charts provide a 5. Spectrum Containers - These products provide a safe, easy
rewritable surface for designating color to specific lubricants. method of transporting, handling, and dispensing lubricants in a
wide variety of applications.
2. S pectrum Tags and Labels - A simple and fast solution for
identifying lubricants, lubrication points, equipment, and/or 6. Spectrum Grease Identification Products - The Grease
anything else you can think of. Identification System uses different color grease fitting caps,
washers, and grease gun bands to ensure that the right product is
3. S pectrum Oil Storage System - These 65 gallon oil storage applied to the right locations.
systems allow for a 55 gallon drum to be transferred into the
tanks well before the product is gone. 7. Opto-Matic Color Bands (not shown above) - These color
collars slide over the upper casting of Tricos Opto-Matic Oilers
4. E ZI-action Drum Pumps - These pumps provide any easy and Closed System Oilers for easy identification of lubricant type.
method of dispensing a wide range of liquids from 5 to 55 gallon
containers.
www.tricocorp.com
800.558.7008
H2
SPECTRUM TAGS AND LABELS
Avoid lubricant cross contamination and misapplication with

Spectrum Tags and Labels. The Spectrum Tags and Labels
provide a simple and fast solution for indentifying lubricants
from storage to point of use. These easy to use, durable color-
coded tags and labels can be used for marking everything
from storage containers and drums, transport containers, hand
pumps, filter carts, transfer carts, dispensing equipment and
tools, machinery, lubrication points or anything else you can
think of. Use a felt tip marker, crayon, or Spectrum customized
label to mark the tag with your information. Then simply seal
the information beneath the laminate sheet to keep it clean
and legible. The Spectrum labeling system allows you to create
customized labels using various colors, text and barcoding for
your specific requirements.
CUSTOMIZED LABEL
All you need to do is supply the data file for your custom
Spectrum label, and well do the rest! Let us know if you want
the label with or without barcoding.
FEATURES Part of the Spectrum Visual Lubrication Management Products

Color-coded solution for identifying containers, dispensers, that use color coding to ensure the correct lubricant is used in the
filter carts, equipment, machinery lubrication points, etc right piece of equipment, and in the proper location. Combine
Spectrum Tags and Labels with other Spectrum Products for
Durable Spectrum Tags are weather and chemical resistant to
effective lubrication management from storage to point of use.
withstand the most demanding indoor and outdoor use For more Spectrum Products, look for the Spectrum logo.
Spectrum Tags are made of durable 1/16" UV inhibited plastic
with a tough clear laminate that withstands acids, caustics,
oils, and abrasions TAG SPECIFICATIONS
Spectrum Custom Labels can contain up to four lines of Tag Size 2"W x 4"H
information including a barcode
Tag Material 1/16" UV inhibited plastic
Grommet Size 5/16" Diameter
Colors Available in 10 colors
2.00"
Spectrum Tags
and Labels are
5/16" used to identify
grease lines for
Automatic Grease
4.00"
Dispensers.
www.tricocorp.com
800.558.7008
H3
SPECTRUM TAGS AND LABELS
Spectrum Tags and Labels are easy

to usea 4-step process
SELECTION CHART
Part of the Spectrum Visual Lubrication SPECTRUM CUSTOM LABELS
Management Products that use color coding
to ensure the correct lubricant is used in the Model No. Description
right piece of equipment, and in the proper
Spectrum Custom Labels
location. Combine Spectrum Tags and Labels 37085 Sheet of 18
with other Spectrum Products for effective
lubrication management from storage to Spectrum Custom Labels with
37086
point of use. For more Spectrum Products barcoding Sheet of 18
look for the Spectrum logo. Spectrum Tag on a Watchdog Desiccant Breather
SELECTION CHART
SPECTRUM TAGS LABEL SPECIFICATIONS
Model No. Tag Color Custom Label Size 1-1/4W x 2-3/8 H
37075 Red Labels Sheet quantity (18 per sheet)
37076 Orange Code 39
37077 Yellow Code 39 Extended
37078 Green Code 128 A, B, C, and Auto
37079 Blue UCC/EAN 128
Interleaved 2 of 5
37080 Purple
Standard 2 of 5
37081 Dark Green Barcode formats
available Code 93
37082 Tan
Code 11
37083 Gray Codabar
37084 Black UPC A
UPC E
EAN 13
EAN 8 Spectrum Tag with customized
barcoding label
www.tricocorp.com
800.558.7008
H4
SPECTRUM OIL STORAGE SYSTEM
Tricos Spectrum Oil Storage System (SOSS) is your

streamlined solution for the identification, transfer,
storage and dispensing of your oils and plant
lubricants.
The SOSS is an innovative, economical bulk oil
storage system that allows you to save space on
your plant floor, while keeping your lubricants
contaminate free. This system is flexible to
constricted space requirements and was designed
with allowable expansion off of the base units. It
also eliminates the potential for lubricant mess and
mishandling keeping each drum clearly identified
using our exclusive Spectrum color-coded tags and
labels (refer to pages 2627).
The Spectrum Oil Storage System is a reliability
tool exclusively from Trico yet another way weve
found to keep your people and your machines
running lean and productive.
Color-coded labels and tags identify oil type to FEATURES

ensure the right lubricant is delivered to the Available in four basic, 65 gallon tank configurations 4, 6, 8, and 12
right equipment. 1-1/2" Polyurethane lines and Polyethylene shutoff valvestandard on
all systems
Dispensing valves - standard self closing bronze valves with quick coupling
adapters for tank filling
Single drip tray - contains spillage from valve assemblies while dispensing
The Spectrum Oil Storage System is part of the Spectrum Visual
Lubrication Management of products that use color coding Motor and pump combination draw less than 14.5 amps allowing the
to ensure the correct lubricant is used in the right piece of system to be placed on a 15 amp circuit
equipment, and in the proper location. Combine the Spectrum Bronze gear pump - positive displacement and self priming
Oil Storage System with other Spectrum products for effective
lubrication management from storage to point of use. Desiccant breathers - prevents moisture and particulate contamination
from entering tanks
Optional spill containment - exceeds the requirements set by
EPA standards
www.tricocorp.com
800.558.7008
H5
SPECTRUM OIL STORAGE SYSTEM
SPECIFICATIONS OPTIONAL ITEMS

Fluid Capacity Per Tank 65 Gallons SPILL CONTAINMENT
Storage tank Powder coated alumni steel Heavy duty steel constructed spill containment pans
are an environmentally-friendly solution to costly spill
Frame Powder coated steel
clean-ups. Spill containment systems are built to
Sight Gauge Brass/Stainless exceed EPA regulations.
Breather Manifold Assembly 100 cu in
QUICK DISCONNECT KIT
Motor 1-1/2 HP TEFC Quickly and easily disconnect hoses while transferring
Gear Pump Speed 1725 RPM fluid to system tanks.
Amp Draw 14.5 A STAINLESS STEEL TANK UPGRADE
Voltage 110/ 220 V Provide corrosion resistance for water-based fluids.
Maximum Viscosity ISO 680 @ 40C
FIRE SAFETY COMPLIANCE KIT
Minimum Flashpoint 150F To maintain compliance with strict fire safety
Containment Capacity per largest regulations, we offer the Fire Safety Compliance Kit.
>110% The standard PVC hose, underneath the tanks, are
spill container (optional)
Tank Lines 1-1/2" Polyurethane replaced with " NPT fittings and flex steel hose that
connects to a fusible link valve with spring activated
Tank Shut-Off Valves Polyethylene handle. If the temperature reaches 166F, the handle
Valve Assembly Self Closing 1" Bronze is automatically triggered and shuts off any possible
leakage of fluid from the tank.
SELECTION CHARTSYSTEMS
Number of
Model No. Tank Arrangement Depth Width Height Floor Area
Containers
36781 4 2 rows of 2 containers 43" 54" 100" 16.1 sq ft
OPTIONAL ITEMS
36785 Spill Containment, 4 Tank System Sight gauge and
36786 Spill Containment, 6 Tank System graduation level label
provides indication of
36787 Spill Containment, 8 or 12 System remaining fluid
36791 Fire Safety Compliance Package, Per Tank
36239 Quick Disconnect Kit, 4 Tank System
36792 Stainless Steel Tank Upgrade (316 ss), Per Tank
www.tricocorp.com
800.558.7008
H6
EZI-ACTION DRUM PUMPS
EZI-action Drum Pumps provide an easy method of dispensing a wide range of liquids
including strong acids, alkalis, mild solvents, lubricants, oils, and diesel to name a few
from 5 gallon containers to 55 gallon drums. The pumps dispense fluid on both the up
and down stroke with only two moving parts. Patented zero-friction design provides
effortless flow of viscous fluids up to 8,800 cps. The pumps are ruggedly constructed
with polypropylene and polyethylene to perform in hostile conditions. Each EZI-action
Drum Pump is supplied with the appropriate adapters for quick and easy installation.
All EZI-action Drum Pumps feature a safety strap, which locks the pump handle in the
closed position to prevent accidental discharge of liquids when not in use. Optional
color-coding of the Safety Strap, when used in conjunction with fluid transferring and
dispensing containers, such as Spectrum Containers, minimize the risk of fluid cross-
contamination and ensures the right lubricant is used in your equipment.
FEATURES
Easy to install, safe to use, and simple to maintain
Fits 5 to 55 gallon containers
Pumps liquid on both the up and down strokes
Sits on the base of the container
Prevents undesired fluid drip
Pumps high viscosity liquids
Optional color-coding system available
No wearing parts
Not to be used with highly flammable liquids, strong
solvents, or gasoline Optional color-coding of the Safety
Strap, when used in conjunction with
EZI-action Drum Pump with optional fluid transferring and dispensing
color coded Safety Strap containers, such as Spectrum
Containers, minimize the risk of fluid
SPECIFICATIONS cross-contamination and ensures the
right lubricant is inserted into the right
Material Polypropylene and Polyethylene piece of equipment.
Max.
8,800 cps
Viscosity
5-6 Gallon Drum Pump 6 oz per stroke SELECTION CHART
Max.
15-30 Gallon Drum Pump 15 oz per stroke
Flow
15-55 Gallon Drum Pump 15 oz per stroke
COLOR CODED
SAFETY STRAPS
Model No. Color Part of the Spectrum Visual
Lubrication Management Products
SELECTION CHARTEZI-ACTION 36983 Yellow that use color coding to ensure the
DRUM PUMPS 36984 Red correct lubricant is used in the right
piece of equipment, and in the proper
Model No. Tank Capacity 36985 Blue location. Combine EZI-action Drum
36980 15-55 gallon containers 36986 Green Pumps with other Spectrum Products
36981 15-30 gallon containers for effective lubrication management
36987 Orange
from storage to point of use. For
36982 5-6 gallons containers 36988 Purple more Spectrum Products look for the
Spectrum logo.
www.tricocorp.com
800.558.7008
H7
SPECTRUM OIL CONTAINERS
Spectrum Oil Containers providing a simple, easy-to-use and error-free solution

to store, identify, transport and dispense lubricants. They offer users an excellent
way to keep lubricants free from dust, dirt, water and other machine-damaging
contaminants. They play an important role in the lubrication supply chain,
especially between bulk containers and top-off points, which industry experts
indicate to be the most common source of contamination.
Color coded on/off breather vent
Square design allows for stability when using hand pump
Ergonomically contoured container to fit forearm
Up to 100 colors options with combination of lid and vent colors
PRODUCT SELECTION SPECIFICATIONS

O-ring Buna-N
PUMP STORAGE LID
Temperature Range -40F to 176F
This multi-purpose lid allows rapid pouring of oils,
making it ideal for topping off machinery such as Material High Density Polyethylene
crankcases or large engine blocks. Fitting the Hand Additives UV stabilizer
Pump to the Pump Storage Lid will allow lubricant
to be pumped out of 2, 3, and 4 gallon containers. NOT SUITABLE FOR USE WITH FUELS OR SOLVENTS
CONTAINERS 2, 3, 4 GL (8, 11, 15 L)

1" NOZZLE LID These robust and durable containers feature a wide
Ideal for topping-off engines, crankcases, and other opening for rapid no-spill filling and will fit any lid.
areas where higher flow is required. The containers are semi-transparent with graduated
markings along the side making lubricant level easy to
see. Each container comes with a writable CONTENTS
label to provide easy identification of lubricant type.
1/2" NOZZLE LID HAND PUMP

Ideal for use with oils having viscosities up to ISO Ideal for awkward or hard to reach oil top-off
460 or where precise pouring is required. applications such as gearboxes, lathes, and milling
machines. Supplied with outlet hose and anti-drip nozzle.
Simply fit the Hand Pump to a Pump Storage Lid and
mate with a 2, 3, or 4 gallon container.
1/4" NOZZLE LID BREATHER VENT

Ideal for controlled pouring into small reservoirs or The Breather Vent is available in ten colors to coordinate
filler holes. with lid color or to use as a secondary color option (ex.
for identifying viscosity grade, lubrication frequency, or
base oil type). All 2, 3, 4 gallon containers are supplied
with a black Breather Vent as standard.
SELECTION CHARTLIDS SELECTION CHART

Dark Model No. Description
Description Yellow Red Blue Green Black Orange Purple Gray Tan
Green
34460 2 gl container (8 l)
Pump Storage Lid 34430 34431 34432 34433 34434 34435 34436 34437 34438 34439
1" Nozzle Lid 34420 34421 34422 34423 34424 34425 34426 34427 34428 34429
1/2" Nozzle Lid 34410 34411 34412 34413 34414 34415 34416 34417 34418 34419
34463 Hand Pump
1/4" Nozzle Lid 34400 34401 34402 34403 34404 34405 34406 34407 34408 34409
Breather Vent 24011 24012 24013 24014 24010 24015 24016 24017 24018 24019
www.tricocorp.com
800.558.7008
H8
SPECTRUM OIL CONTAINERS CAPACITY
OIL CONTAINERS

234
gallon
(8 liters)
gallon
(11 liters)
gallon
(15 liters)
Easy twist open

& close nozzle to Durable carry
control flow rate handle for ease of
transporting Color
coded on/off
breather vent
Contents label
indicates product in
container
Front & back

handles for
easy pouring
Ergonomically
contoured Semi-
container to fit transparent
forearm container w/
English & metric
graduations
Part of the Spectrum Visual Lubrication Management Products

that use color coding to ensure the correct lubricant is used
in the right piece of equipment, and in the proper location.
Combine Spectrum Containers with other Spectrum Products
for effective lubrication management from storage to point of
use. For more Spectrum Products look for the Spectrum logo.
www.tricocorp.com
800.558.7008
H9
SPECTRUM GREASE IDENTIFICATION PRODUCTS
Too often the wrong grease is put into the wrong piece of equipment, which can cause an incompatibility problem that can
quickly lead to bearing failure. Avoid cross contamination and misapplication with Tricos Grease Identification System. Tricos
Grease Identification System ensures you are receiving the right product at the right location.
Grease Gun Bands Grease Fitting Washers Grease Fitting Caps

Color grease gun bands slide over standard Color grease fitting washers are available in two sizes Grease fitting caps snap securely over
grease guns and do not slip after being to fit 1/8" NPT or -28 grease fittings. grease fittings to seal out dirt and
installed. Color code grease guns to match moisture. Integral retaining ring keeps cap
grease fitting caps and/or washers on in place during servicing.
equipment to avoid cross-contamination and
mis-application of grease.
SELECTION CHART
Red Orange Yellow Green Blue Purple
Buna-N Grease Gun Band 37038 37056 37036 37037 37039 37044
Buna-N Washer for 1/4-28 Grease Fittings (sold in 10 packs) 37030 37029 37031
Buna-N Washer for 1/8 NPT Grease Fittings (sold in 10 packs) 37034 37032 37033 37035
Grease Fitting Cap for 1/4-28 Grease Fittings (sold in 10 packs) 37022 37057 37020 37021 37023 37040
Grease Fitting Cap for 1/8 NPT Grease Fittings (sold in 10 packs) 37026 37058 37024 37025 37027 37041
RIGHT PRODUCT Identify

grease guns to ensure that
the correct type of grease is
used at each grease point.
RIGHT LOCATION Apply

color washers and/or caps
to all grease points to avoid
cross contamination and
misapplication.
Part of the Spectrum Visual Lubrication Management Products that use color coding to ensure the correct lubricant
is used in the right piece of equipment, and in the proper location. Combine Spectrum Grease Identification Products
with other Spectrum Products for effective lubrication management from storage to point of use. For more Spectrum
Products look for the Spectrum logo.
www.tricocorp.com
800.558.7008
H10
SPECTRUM OPTO-MATIC COLLARS
Spectrum Opto-Matic Collars slide over the

upper casting of Tricos Opto-Matic Oilers and
Closed System Oilers for easy identification of
lubricant type. Color-code constant level oiler
to match lubricant dispensing containers, such
as Spectrum, to avoid cross-contamination and
misapplication of lubricant.
FEATURES
Made from Buna-N material
Conveniently sold in packs of ten
SELECTION CHART
Model No. Color
37050 Yellow
37051 Green
37052 Red
37053 Blue
Part of the Spectrum Visual Lubrication Management

Products that use color coding to ensure the correct lubricant
is used in the right piece of equipment, and in the proper
location. Combine Spectrum Opto-Matic Collars with other
Spectrum Products for effective lubrication management
from storage to point of use. For more Spectrum Products
look for the Spectrum logo.
www.tricocorp.com
800.558.7008
H11
INDUSTRIAL FAST FUNNEL
Tricos Industrial Fast Funnels are the simple, convenient and clean way to
pour. Intended for one-time use, each funnel remains clean and compact until
separated from the header and opened. Made of coated, heavy grade paper
stock, they can be used with most lubricants and liquids and are designed to fit
a wide variety of orifices as small as " diameter.
FEATURES
Improves safety and efficiency by preventing spills on floors and equipment
Available in two convenient sizes, standard and large
Easily stores and remains clean in any toolbox, cabinet, pocket, etc.
Conveniently packaged in handy three-packs
Fast Funnels are biodegradable
Simply tear-off, pop open, and pour
SELECTION CHART
Model Quantity of Total No. of
Description
No. 3-Packs Funnels
36990 Standard Size Fast FunnelInterpack 12 36
36991 Large Size Fast FunnelInterpack 12 36
36992 Standard Size Fast FunnelCase 288 864
36993 Large Size Fast FunnelCase 144 432
2.75" 4.25"
Side View
2.75" Side View
4.25"
5.625"
9.00"
Top View
0.375"
Top View
Standard Funnel
0.375"
The flow can be increased on the Industrial
Large Funnel Fast Funnels by cutting at the preprinted lines.
www.tricocorp.com
800.558.7008
I1
OIL ABSORBENTS
PERFORATED ROLLS
Perforated rolls are ideal for leaks, drips and overspray while allowing for more
surface area coverage than pads. Perforated every 30" for quick and easy tearing.
These lint-free rolls will not contaminate your equipment and they are tough
enough for foot traffic.
Part Package Absorption Package
Absorbency Size
Number Size Capacity/Package Weight
30178 Universal 30" x 150' 1 roll 38 gal. 27 lbs.
30181 Oil Only 30" x 150' 1 roll 50 gal. 33 lbs.
30183 Camo 30" x 150' 1 roll 52 gal. 35 lbs.
ORGANIC CORN COB SOCK

The corn cob socks are ideal for use around leaking machines or ones that
spray fluid. Socks are also used to contain spills before they become hazardous.
Organic corn cob provised superior absorbency.
Part Package Absorption Package
Absorbency Size
Number Size Capacity/Package Weight
30185 Universal 3"W x 48"L 40 25 gal. 60 lbs.
ABSORBENT PADS
Absorbent pads are ideal to control
everyday leaks and spills. They have a HELPFUL TIP:
perforation down the middle, allowing
you to take what you need. Universal absorbents will
The dimple pattern speeds wicking absorb most fluids (oil,
of liquid throughout the pad faster coolants, water, etc).
and provides durable construction to Oil only absorbents will only
prevent tearing during clean-up. absorb oil. Camo absorbents
Part Absorption Package will absorb most fluids (oil,
Absorbency Size Package Size Capacity/Package coolants, water, etc) and are
Number Weight
30177 Universal 16" x 20" 100 pads 23 gal. 16 lbs. ideal for foot traffic.
30180 Oil Only 16" x 20" 100 pads 30 gal. 20 lbs.
30184 Camo 15" x 19" 200 pads 32 gal. 19 lbs.
DRUM TOP PADS

Eliminate messy drips and overflow when pumping fluids from drums with these drum
topper pads. They keep drum tops clean and grime free. The 55-gallon drum topper pads
contain two pre-cut bung holes making placement of pad and drum access easy.
Absorption
Part Number Absorbency Size Package Size Package Weight
Capacity/Package
30179 Universal 22" dia. 25 pads 7 gal. 6 lbs.
30182 Oil Only 22" dia. 25 pads 7 gal. 6 lbs.
www.tricocorp.com
800.558.7008
J1
INTRODUCTION TO GRAVITY FEED OILERS
The purpose of gravity feed lubrication is to provide a DRIP-FEED OILERS: A drip-feed oiler consists of a simple
reliable and continuous supply of oil to bearings, gears, reservoir mounted in a convenient position for filling, while
chains, and other rotating or moving machinery components. allowing the piping to be connected to the point of lubrication.
As the name applies, these systems operate using gravity Typically the rate of feed, to each lubrication point, is
feed principle. A supply reservoir is used to feed lubricant regulated by a needle valve, which is manually adjustable. In
through piping, by means of gravity, to the point of addition, manifolds can be used with drip-feed oilers to supply
lubrication. These systems can also consist of a number of lubricant to multiple points.
manifolds or distribution centers from which oil is directly
piped to the surface to be lubricated. Each point has its own CHAIN OILERS: Chain oilers automatically apply a film of
independent piping and set of connections. Gravity feed lubricant to chains, gears, slides, irregular surfaces or out-
lubrication is an alternate means of lubricating machinery of-the-way oscillating parts. They greatly reduce link wear,
components rather than using automatic systems such as stretch, friction, rust, and corrosion. Chain oilers are similar
centralized lubrication. The method of employing gravity in operation to drip-feed oilers however; they contain an
feed lubrication consists of drip-feed, chain, and wick feed applicator to supply lubricant to the source. Applicators
lubrication. are available in a variety of styles for both lubricating and
cleaning purposes of the chain.
WICK FEED OILERS: Wick feed oilers combine gravity feed

with capillary action to provide a constant rate of oil to the
lubricating point, regardless of fluid level in the reservoir.
The capillary action is provided by the use of various wick
sizes. The rate of feed is adjusted with the use of different
wick sizes or viscosity of oil.
Gravity feed oilers bring the benefits of automatic lubrication

without the high cost. They provide a simplistic, yet reliable
method, of keeping component parts of industrial machinery
lubricated. Trico offers a wide range of gravity feed oilers
for lubricating single or multiple points and for use in
conjunction with brush applicators.
Gravity feed oiler Gravity feed oilers on a mud

on drying machine washing drum
Chain oiler lubricating a chain on a trommel screen
www.tricocorp.com
800.558.7008
J2
GRAVITY FEED OILERS

SPECIFICATIONSKG
The gravity feed oilers work in a Max. Operating Temp. 250F Continuous
wide range of industrial lubricating Reservoir Heavy Wall Heat Resistant Glass
applications. The rate of oil feed Oil Sight Heavy Wall Heat Resistant Glass
is adjustable and a lock ring
Gaskets Buna-N
maintains the setting. In bearing
or gear lubrication, the gravity Materials Heavy Gauge Steel
feed oilers provide dependable Finish Bright Nickel Plate
lubrication in the most demanding Needle Valve Steel
environments.
37016 SELECTION CHARTKG
FEATURES Model Dimensions (in.)
Capacity Connection
A No (NPT) A B
Three position toggle switch
provides easy to use on-off 37011 1 oz. 1/8 1-5/8 3-1/4
control, and a flushing option to 37012 1 oz. 1/4 1-5/8 3-1/4
avoid dry start-ups
37013 2.5 oz. 1/8 2-1/8 4
Vented sight chamber ensures B
37014 2.5 oz. 1/4 2-1/8 4
proper operation when used with
tight or high speed bearings 37015 5 oz. 1/8 2-5/8 4-5/8
Copper brazing of all steel 37016 5 oz. 1/4 2-5/8 4-5/8
connections provides long life 1 7/16 37017 5 oz. 3/8 2-5/8 4-5/8
and leak proof design 37018 10 oz. 1/4 3-1/8 5-3/8
KG
37019 10 oz. 3/8 3-1/8 5-3/8
KG
Heavy wall glass reservoirs and SPECIFICATIONSKL
sight chambers operate Max. Operating Temp. 165F Continuous
continuously at 250F Reservoir Butyrate Plastic
Nickel plating offers superior Oil Sight Acrylic Plastic
corrosion resistance
Sight Gaskets Buna-N
Materials Steel and Brass
KL Finish Bright Zinc Plated
Plastic reservoirs have
Needle Valve Steel
reinforced ribs for long life
30325
and impact resistance SELECTION CHARTKL
Zinc plating resists corrosion Dimensions (in.)
Model
A Capacity Connection
No (NPT) A B
30322 2 oz. 1/8 1-15/16 3-1/16
30323 2 oz. 1/4 1-15/16 3-1/16
B 30324 4 oz. 1/8 2-5/16 3-7/8
30325 4 oz. 1/4 2-5/16 3-7/8
30326 4 oz. 3/8 2-5/16 3-7/8
1 7/16
30327 8 oz. 1/8 2-5/8 4-15/16
30328 8 oz. 1/4 2-5/8 4-15/16
KL 30329 8 oz. 3/8 2-5/8 4-15/16
www.tricocorp.com
800.558.7008
J3
ATLAS GRAVITY FEED OILERS
The Atlas gravity feed oiler is used in heavy-duty applications

where a large oil capacity is needed and an adjustable rate
of oil is required. Silver brazed construction of the reinforced
brass assembly provides long life in high vibration applications.
The Atlas oiler is adjustable for varying rates of oil flow used in
bearing or machinery lubrication. The adjustable drip rates are
easily set and controlled with a lock ring for maximum versatility.
FEATURES
Heavy wall heat resistant glass reservoirs and sights
providing service in temperatures to 250F
Acrylic reservoir versions have heavy walls for long life in
applications to 165F
Three position toggle switch provides easy to use on-off
control, and a flushing option to avoid dry start-ups
Direct mounting with NPT threads (AL) or remote
mounting with 3/4-16 mounting stud and 1/4 tubing
connections (ACL) simplifies installation 32117
31543
Silver brazing of all brass construction provides long life
and leak proof design
Clear lacquer finish resists corrosion
A A SELECTION CHART AL
Locking Ring Mechanism - Direct Mounting
Model No. Connection Dimensions (in.)
Capacity
Glass Acrylic (NPT) A B
B 31517 31416 1 pt. 3/8 4-7/16 4-5/16
B
31518 31417 1 pt. 1/2 4-7/16 4-5/16
31543 31432 1 qt. 1/2 4-7/16 7-5/8
31581 31480 2.5 qt. 1/2 5-11/16 9-3/4
1 7/8
31481 1 gal. 1/2 5-11/16 14-13/16
AL ACL 1 3/8
SPECIFICATIONS
SELECTION CHARTACL
Glass 250F Continuous Locking Ring Mechanism - Remote Mounting -
Max. Operating Temp. Acrylic 165F Continuous 1/4 tube connector furnished.
Heavy Wall Heat Resistant Glass Model No. Dimensions (in.)
Reservoir Mounting
Heavy Wall Acrylic Plastic Capacity
Glass Acrylic Stud A B
Heavy Wall Heat Resistant Glass
Oil Sight 32117 32016 1 pt. 3/4-16 4-7/16 5-5/16
Heavy Wall Acrylic Plastic
Gasket Buna-N 32133 32032 1 qt. 3/4-16 4-7/16 8-11/16
Material Brass 32181 32080 2.5 qt. 3/4-16 5-11/16 10-13/16
Finish Lacquered Satin Finish 32081 1 gal. 3/4-16 5-11/16 15-7/8
Needle Valve Brass
www.tricocorp.com
800.558.7008
J4
PC OIL CUP
15/16
31141
PC
PC oil cups serve a dual purpose of providing a small oil SPECIFICATIONS

reservoir or being used as an oil gauge. The PC oil cup is ideal Max. Operating Temp. 165F Continuous
for applications where it can be directly mounted to a bearing
housing, gear box or any other industrial equipment that Reservoir Butyrate Plastic
requires lubricant. Material Steel
FEATURES
Dust proof, self-closing fill caps supplied with all models SELECTION CHART
Plastic reservoirs have reinforcing ribs for long life and Model Connection Dimensions (in.)
impact resistance Capacity
No (NPT) A B
Copper brazing of all steel connections provides long life 31121 2 oz. 1/8 1-15/16 3-1/16
31122 2 oz. 1/4 1-15/16 3-1/16
Zinc plating resists corrosion
31141 4 oz. 1/8 2-5/16 3
31142 4 oz. 1/4 2-5/16 3
31143 4 oz. 3/8 2-5/16 3
31181 8 oz. 1/8 2-5/8 4
31182 8 oz. 1/4 2-5/8 4
31183 8 oz. 3/8 2-5/8 4
www.tricocorp.com
800.558.7008
J5
VARI-FEED WICK OILERS
SPECIFICATIONS
Reservoir Butyrate Plastic
Oil Sight Acrylic
Sight Gaskets Buna-N
Wicking Wire Cored Cotton
Material Steel and Brass
31042
30842
30942 30742
SELECTION CHARTN, NS
Model No. Connection Dimensions (in.)
Vari-Feed wick oilers are used to provide a controlled Capacity
Type N Type NS (NPT) A B
amount of oil to a bearing or other machinery part.
The principle of delivery combines gravity feed with 30742 30842 4 oz. 1/4 2-5/16 3
capillary action in the wick to provide a constant feed 30782 8 oz. 1/4 2-5/8 4
rate of oil regardless of the fill level in the reservoir.
Feed rate is determined by the viscosity of the oil and
the type of wick being used. SELECTION CHARTNA, NAS
Two styles of operation are available depending on the Model No. Dimensions (in.)
application. When continuous delivery is required the N Connection
Type Capacity
or NS models are used. Type NAS (NPT) A B
NA
For on-off control of the oiler, the NA and NAS models
have a filler cap with gasket that stops oil delivery 30942 31042 4 oz. 1/4 2-5/16 3-1/4
when fully closed. By turning the fill cap slightly, the 31082 8 oz. 1/4 2-5/8 4-5/16
threaded air vent is opened allowing oil to flow.
REPLACEMENT WICKS
Packed 50 of one color per carton. Also sold by the foot.
FEATURES
Model
Feed rate is constant and adjustable only by Length Description Thickness
No.
changing to a different wick
30701 White - Very Fast Feed Wick 3 mm
5 wick speeds are available and color coded for easy
replacement or installation. A multi-pack of different 30702 Green/White - Fast Feed Wick 5 mm
wick speeds is included with each oiler 30703 1-3/8" White/Blue - Medium Feed Wick 6 mm
Dust proof caps supplied with N and NS models. NA 30704 Red/White - Slow Feed Wick 8 mm
and NAS models have sealed cap and operate only 30705* White/Blue -Very Slow Feed Wick 12 mm
when cap is in vent position
*Contains 100 pieces of white/blue wicks
Plastic reservoirs have reinforcing ribs for long life
A A
Oil sights available on NS and NAS models for visual A A
indication of oil flow
Copper brazing of all steel connections provides long B B B B
life and leak proof design
Zinc plating resists corrosion 1 1/32 1 1/32
2 1/8 2 1/8
N NS NA NAS
www.tricocorp.com
800.558.7008
J6
D &DEFULL FLOW DISPENSERS
Trico full flow dispensers are used to lubricate bearings, chains, and other
machinery parts when remote valves or manifolds are used. This allows
for easy access to the oil reservoir when the valve or manifold is located
in a difficult to reach spot. These dispensers are also used in applications
where multiple point lubrication is required from one reservoir of oil.
With heavy wall acrylic or heat resistant glass reservoirs, and all brass
construction, they operate in a wide range of applications. In applications
requiring automatic control of the oiler, solenoid versions are available.
FEATURES
Toggle shut-off (D model) provides easy to use manual control
Solenoid version (DE model) allows machine interface for maximum
versatility
Mounting stud simplifies installation to customer supplied bracket
35564 35574-B
Acrylic reservoirs are heavy wall design for service to 165F. Heat resistant
glass reservoirs operate in temperatures to 250F.
Silver brazing of all brass construction provides long life and leak proof design
Clear lacquer finish of brass components resists corrosion
SPECIFICATIONS
A
Glass 250F Continuous
Max. Operating Temp.
A Acrylic 165F Continuous
Reservoir Heavy Wall Acrylic Plastic
Gasket Buna-N
B
B Material Brass
Finish Lacquered Satin Finish
Stainless Steel Plunger and Brass
Solenoid Body UL/CSA Listed
1 13/16
3 1/4
Needle Value Brass
D SELECTION CHARTDE
DE Electric Control - 1/4 Tube Connector Furnished.See "How to Order"
SELECTION CHARTD Model No.

Capacity
Mounting Dimensions (in.)
Manual Control - 1/4 Tube Connector Furnished. Glass Acrylic Stud A B
Model No. Mounting Dimensions (in.) 35572 35573 1 pt. 3/4-16 4-7/16 3-5/16
Capacity
Glass Acrylic Stud A B 35574 35575 1 qt. 3/4-16 4-7/16 6-3/16
35562 35563 1 pt. 3/4-16 4-7/16 4-5/16 35576 35577 2.5 qt. 3/4-16 5-11/16 8-5/16
35564 35565 1 qt. 3/4-16 4-7/16 7-3/16 35579 1 gal. 3/4-16 5-11/16 13-5/16
35566 35567 2.5 qt. 3/4-16 5-11/16 9-5/16
35569 1 gal. 3/4-16 5-11/16 14-5/16 SOLENOID VOLTAGE HOW TO ORDER
Designator Voltage Using the solenoid voltage
chart, add a B to the model
ACCESSORIES V series valves and VM manifolds are B 120V 60 Hz number to specify the correct
ordered separately, please see V series valves and VM manifolds voltage on solenoid versions.
document. Applicators are ordered separately, please see
Applicators document at the end of this section.
Other Voltages and Frequencies Available. Consult Factory.
www.tricocorp.com
800.558.7008
J7
V SERIES VALVES & VM MANIFOLDS
V series valves are used with full flow dispensers

where feed rate adjustment is desired at the point
of lubrication.
VM series manifolds are used with full flow
dispensers and allow Trico applicators to be
mounted directly to them. With adjustable adapters
and integral needle valves, these manifolds allow
easy setting at the point of lubrication.
35584
30176
FEATURES
Horizontal design of needle valve minimizes
contamination at the valve seat SPECIFICATIONS
Clean out plugs provide easy cleaning when required Glass 250F Continuous
Max. Operating Temp. Acrylic 165F Continuous
Heavy wall acrylic or heat resistant Aglass sights
allow easy setting of the desired drip rate B Oil Sight Heavy Wall Acrylic Plastic
Silver brazing of all brass construction provides Gasket Buna-N
long life and leak proof design
25 8 Packing Gland Graphite
Material Brass
Finish Lacquered Satin Finish
AA Needle Value Brass
AA CC BB
BB
SELECTION CHARTV SERIES VALVES
1/4 Tube Connector Furnished
225/8 225/8
5
Model No. No. of Dimensions (in.)
Mounting
5 8
8
Valve
Glass Acrylic Outlets Stud A B C
V 30171 30271 1 1/4-20 2 5/8
11
11/16
16
V
A 30172 30272 2 1/4-20 2-11/16 31/32
C B 30174 30274 4 1/4-20 4-1/16 1-21/32
30176 30276 6 1/4-20 5-7/16 5/8 3-7/16
SELECTION CHARTVM
2
MANIFOLDS 5
8
A
1/4 Tube Connector Furnished
Model No. No. of Dimensions (in.)
Mounting
Valve
Glass Acrylic Outlets Stud A Adapter 3 3/4 + 1/4
11
16 allows
adjustment
35582 35592 2 1/4-20 for wear
and height. 2 1/8
35584 35594 4 1/4-20 6
35586 35596 6 1/4-20 10 2 2
VM
www.tricocorp.com
800.558.7008
J8
STSERIES VALVES & S SERIES APPLICATOR
SPECIFICATIONS
ST Series valves are used
with full flow dispensers Oil Sight
High Impact Strength Polycarbonate Plastic
where feed rate adjustment
is desired at the point of Gasket Buna-N
lubrication. When variable Packing Gland Self Lubricating Buna-N
operating conditions require Material Brass
frequent adjustment, the
large, knurled knob simplifies Finish Lacquered Satin Finish
setting the desired feed rate. 32404 Needle Value Brass
FEATURES
2
Horizontal design of needle valve
11/16
SELECTION CHART
minimizes contamination at the Double Female
valve seat Model No. Connection (NPT)
Double female threads simplify Sight Position
Glass Plastic In Out
installation 3 1/16
7/16 32404 32408 1/4 1/4 Right Angle
Heavy wall polycarbonate or heat
resistant glass sights allow easy
setting of the desired drip rate
Silver brazing of all brass ST Double Female
construction provides long life
Clear lacquer finish of brass
components resists corrosion
S SERIES APPLICATOR BRACKETS

Adapter
S series applicator brackets provide an easy way to mount allows 2 2++1/4
1/4
Trico applicators in remote mounting applications. adjustment
for wear
These brackets are used with full flow dispensers. and height.
221/8
1/8
FEATURES 36024
Rigid steel extrusion, nickel plated for durable installation
Mounting hole and 1/4 in. tubing connector simplifies
installation SELECTION CHART
Adjustable for brush wear Mounting Hole
Model No. Gang
Diameter (in.)
36024 1 17/64
www.tricocorp.com
800.558.7008
J9
APPLICATORS
EVEN-FLO APPLICATORS SELECTION CHART (1/8 NPT connections)
Reservoir 1/8 NPT The unique internal reservoir design
Applicator of these applicators allow uniform Model
Shell
dispensing of oil for chain lubrication. Bristle Type
Insert No.
225/16
5
They are capable of handling a wide 36051 Nylon
16
viscosity range of oils. Stainless steel models

36054 Stainless Steel
Bristles
provide long life and excellent cleaning capability
Oil Flow
in harsh environments. Nylon and stainless steel 2
models rated to 160F.
EVER-LAST APPLICATORS SELECTION CHART (1/8 NPT connections)

Patented Ever-Last applicators use four part
construction to provide long life in the most
demanding applications. Using ordinary shears, Model
No. Width (in.) 2 5 16 225/16
5
16 225/16
5
16 2 16
5
they may be trimmed to fit the exact size of chain

and eliminate uneven wear of the applicator or 36033 1-1/4
side dripping of the lubricant. Using a Buna-N 36036 2 1 1 4 111/4
1
4 2 2
cover and felt plate, the mechanical motion of
the chain movement sets up a pumping action in
the applicator. Temperature rating of 200F.
ROUND BRUSH APPLICATORS SELECTION CHART (1/8 NPT connections)

Trico round brushes are used in applications
Model No. Size (in.) Bristle Type
requiring broad contact surfaces for lubricating
and cleaning. They offer even oil distribution 36039 5/8 Nylon
2 5 16 2 25/16
on the wearing points of chain. Stainless steel 2 25/16
5 5
36042 5/8 Stainless Steel

16 16
models provide long life and excellent cleaning

36045 1 Nylon
capability in harsh environments. Nylon and 5
11 5/8
5
1
stainless steel models rated to 160F. 36048 1 Stainless Steel
8 8
ROTARY APPLICATORS REPLACEMENTSBRUSHES

Trico rotary applicators are used to lubricate and clean
chains. Available with a 3 inch nylon or stainless steel rotary Model No. Description
brush, they provide chain driven cleaning or lubricating 36090 3" Nylon Rotary Brush (1 pair)
at the speed of the chain. They may be mounted in any 36093 3" Stainless Steel Rotary Brush (1 pair)
orientation to the chain, but when located under the
chain they are only used for cleaning. Nylon brushes rated for
temperatures to 250F and stainless steel models rated to 400F.
REMOTE ROTARY BRACKET FOR 1/4 TUBE REMOTE ROTARY BRACKET/VALVE ASSEMBLY
ROTARY BRACKET ASSEMBLY WITH MOUNTING STUD
3/4
1/2 1/2
1/2
3 1/4 3 1/4
3 3/4
3/4 3 3/4 3
3/4 3
ACCEPTS ACCEPTS 1/4 O.D. 5/16-18
Model No. Bristle Type 1/4 O.D. TUBE Model No. Bristle Type TUBE 5/16-18 Model No. Bristle Type MOUNTING STUD
36072 Nylon 5/16 MOUNTING 36084 Nylon MOUNTING STUD 36078 Nylon 5/16
HOLE 5/16 MOUNTING MOUNTING HOLE
36075 Stainless Steel 36087 Stainless Steel HOLE 36081 Stainless Steel
www.tricocorp.com
800.558.7008
K1
INTRODUCTION TO GREASE LUBRICATION
GREASE BASICS
G rease is a dispersion of solid or semi solid additives, sometimes called soaps or thickeners. The purpose of grease is to
lubricate moving parts while the thickener acts as a sponge, under pressure, to release the base fluid when needed.
Typically, greases are used when oil cannot adequately stay in place due to design considerations. They may also be used
when it is desirable to seal out contaminants, prevent lubricant squeeze out, and resist high temperatures.
There are several methods of applying grease to the point of lubrication. The most common forms are manual, single point, and
automatic/centralized lubrication. Trico offers single point lubricators.
TYPES OF SINGLE POINT LUBRICATORS (SPL)

Single point lubricators are a storage device designed to slowly dispense grease to the point of lubrication, typically a
bearing, over a period of time. These devices are usually mounted in the port that a Zerk fitting occupies. They may be driven
mechanically, electrically, pneumatically or by a chemical reaction process. Typically,
the user sets the dispense rate to meet the requirements of the bearing based upon its
size, type, speed, and orientation.
Trico offers three different types of single point grease lubricators.
MechanicalSpring loaded that drives a plunger to feed grease.
Electro-ChemicalA battery operated timer activates an electrochemical cell
producing expandable gas that generates pressure against a piston.
Electro-MechanicalA battery operated timer activates a motor attached through
a small gearbox to drive a cam that activates a piston pump while ejecting a fixed
amount of grease. Grease lubricator installed on a blower fan
WHY USE SINGLE POINT LUBRICATORS

When selected and used properly, single point grease lubricators
can solve maintenance and reliability problems. The following
points outline where single point lubricators might be advisable
to use:
To prevent contamination
An alternative to manual lubrication
Provides a constant flow of lubricant in small volumes to
achieve superior lubrication at low unit cost
Easy to operate
Frequent re-lubrication applications
When there is insufficient staff to ensure proper lubrication
Cost of automatic lubrication systems cant be justified
Grease lubricator installed on pillow block of a dynomometer
Difficult access or safety hazard for manual system
www.tricocorp.com
800.558.7008
K2
STREAMLINER ELECTRO-MECHANICAL GREASE DISPENSERS
Streamliner M grease dispensers are designed to ensure reliable, precise

lubrication and cut lubrication costs with its advanced electro-mechanical
drive. It consists of a vertical feed pump, motor and gear set, and
microprocessor control system, allowing operating pressures up to 280
psi. The Streamliner M grease dispensers have a variable dispensing rate
from half to 12 months. They are ideal for use in remote and multi-point
applications. When used with Tricos distribution block a single unit can
lubricate up to eight lubrication points (Standard Streamliner M unit only).
The grease is supplied in 125cc or 250cc grease pouches. Grease pouches
and battery pack are replaceable as Service Pack. The service pack
consists of one of six standard greases.
Streamliner M-UL is similar to the standard Streamliner M unit, however it
is rated to be used in hazardous locations.
STREAMLINER M High Pressure

Variable feed rate with electro-mechanical drive Multi-point lubrication
Easy to read LCD display Refillable
Microprocessor control Immediate stop/start
High operating pressure of 280 psi for contamination removal and multi-
point lubrication
Multi-point lubrication capabilityup to eight points (Standard HAZARDOUS AREA
Streamliner M unit only)
The Streamliner M-UL is UL approved to meet
Six variable dispensing rateshalf, 1, 2, 3, 6, and 12 months the following requirements:
Anti-vibration, break-free design
UL79, Power-Operated pumps for Petroleum
Unit can be deactivated and adjusted as necessary dispensing products, Eighth Edition ANSI/
CE and UL approved ISA-12.12.01-2000, Nonincendive Electrical
equipment for use in Class I and II, Division 2 and
ADJUSTMENT GUIDELINES Class III, Divisions 1 and 2 Hazardous locations.
Below are some guidelines for bearing lubrication requirements. Rating Description
Requirements may vary with individual bearing types or operating conditions.
Flammable Gases,
Class 1
Dispensing Dispensing Vapors or Liquids
Bearing Shaft Diameter 125cc 250cc
Equivalents Equivalents Where ignitable concentrations
121305mm (4-" ~ 12") mo. 16.6cc/day of flammable gases,vapors
Division 2 and liquids are not likely to
105120mm (4-" ~ 4-") mo. 8.3cc/day 1 mo. 8.3cc/day exist under normaloperating
conditions.
88104mm (3-" ~ 4-") 1 mo. 4.2cc/day 2 mo. 4.2cc/day Groups C & D C (Ethylene), D (Propane)
7987mm (3-" ~ 3-") 2 mo. 2.1cc/day 3 mo. 2.8cc/day
6378mm (2-" ~ 3") 3 mo. 1.4cc/day 6 mo. 1.4cc/day
4962mm (2" ~ 2-") 6 mo. 0.7cc/day 12 mo. 0.7cc/day
2548mm (1" ~ 2") 12 mo. 0.3cc/day
www.tricocorp.com
800.558.7008
K3
STREAMLINER ELECTRO-MECHANICAL GREASE DISPENSERS
SPECIFICATIONS
125cc (4 oz.) and 250cc (8 oz.)
Grease Pouch Capacity*
(replaceable)
Power Supply* DC 4.5 V (replaceable)
Max. Operating Pressure 800 psi (Streamliner M unit only)
280 psi (Streamliner M unit)
Normal Operating Pressure
200 psi (Streamliner M-UL unit only) HELPFUL TIP:
-4F to 140F (Streamliner M unit)
Operating Temp. Trico provides a wide range of
14F to 122F (Streamliner M-UL unit)
adapters, mounting brackets, tubing,
Dispensing Rates 1, 2, 3, 6, 12 and half month
and distribution blocks for remote
Lube Cycle Approximately 20 seconds/stroke
and multi-point installations. Please
Dispensing Volume .347 cc/cycle see Streamliner Electro-Mechanical
Dispensing Accuracy +/- 3% @ 68F Accessories document on page K5.
*Grease pouch and battery pack sold separately as Service Pack.
SELECTION CHARTUNITS
125cc Reservoir 250cc Reservoir Description Connection
33347 33348 Streamliner M Unit 3/8" NPT
33372 33371 Streamliner M-UL Unit 3/8" NPT
Grease pouch and battery pack sold separately as Service Pack.
Streamliner MS unit also available PART NUMBERSMS SERIES

The MS unit has all the same features and specifications as the M unit and
Model No. Capacity Units/Case
in addition, is capable of operating only when the equipment is running.
33366 250cc Single Unit
SELECTION CHARTSERVICE PACK

125cc 250cc Grease Type NLGI # Thickener Type
Reservoir Reservoir
33349 33356 Mobilgrease XHP 222 2 Lithium Complex
33350 33357 Exxon Unirex EP2 2 Lithium Complex
33351 33358 Mobilith SHC 100 2 Lithium Complex
33352 33359 Mobilgrease FM 222 2 Aluminum Complex
33354 33361 Mobilith SHC PM 460 1.5 Lithium Complex
Custom grease filling is available. For specific terms and conditions please contact
a Trico Customer Service Representative.
www.tricocorp.com
800.558.7008
K4
STREAMLINER M 500CC GREASE DISPENSER

The Streamliner M family now offers a larger reservoir capacity of 500cc to meet the demand
for multi-point lubrication and the lubrication of large size bearings. The larger reservoir volume
minimizes labor cost associated with the more frequent grease cartridge replacement that occurs
with the 125cc and 250cc units.
The grease is supplied in a customized 500cc grease pouch. The grease pouch and battery pack
are replaceable as a Service Pack. The service pack consists of one of six standard greases with
either a standard alkaline battery pack or high performance lithium battery pack, depending on the
requirements of the application (see battery selection guide).
The Streamliner M 500cc consists of a vertical feed pump, motor/gear set, and microprocessor
control system, which delivers an operating pressure of 280 psi. The lithium battery pack allows
you to achieve higher pressures which makes the unit ideal for multi-point lubrication. When used
with Tricos distribution block a single unit can lubricate up to eight lubrication points.
Easy to read LCD display Grease Pouch Capacity 500cc (replaceable)
Electro-mechanical driven with microprocessor control Power Supply DC 4.5 V (replaceable) Alkaline
Eight variable dispensing rates - half, 1, 2, 4, 6, 12, 18, Battery Lithium Battery
and 24 months Max. Operating Pressure 800 psi
Multi-point lubrication capability up to eight points Normal Operating Pressure 280 psi
Indication of grease pouch and battery replacement Operating Temperature Alkaline Battery: 14F to 122F
Indication of motor overloading along with date Lithium Battery: -40F to 140F
Indication of days remaining until servicing Dispensing Rates Half, 1, 2, 4, 6, 12, 18, 24 months
Immediate start/stop Lube Cycle Approximately 20 seconds/stroke
Auto locking mode is provided so the unit operates based
on the user setting during a full period of service. It prevents
a possible mode change from an accidental press of a keypad BATTERY SELECTION GUIDE
during unit operation. Alkaline Lithium
Operating Temp. 14F to 122F -40F to 140F
SELECTION CHARTUNITS Back Pressure 280 psi or less Greater than 280 psi
Model No. Description Connection Multi-Point N/A Up to 8 points
33410 Streamliner M 500cc 3/8" NPT Capability
Grease pouch and battery pack sold separately as Service Pack. Remote Distance 10 ft or less Greater than 10 ft
SELECTION CHARTSERVICE PACK

Alkaline Lithium Grease Type NLGI # Thickener Type HELPFUL TIP:
The new P/N 33410 grease dispenser
utilizes a new style of grease pouch
33414 33420 Mobilith SHC 100 2 Lithium Complex that threads directly into the pump.
33415 33421 Mobilgrease FM 222 2 Aluminum Complex These part numbers are listed in the
33416 33422 Mobilith SHC 220 2 Lithium Complex chart to the left. The new service packs
33417 33423 Mobilith SHC PM 460 1.5 Lithium Complex are not interchangeable with P/N 33306
Custom grease filling is available. For specific terms and conditions please grease dispenser.
contact a Trico Customer Service Representative.
www.tricocorp.com
800.558.7008
K5
STREAMLINER ELECTRO-MECHANICAL ACCESSORIES
Trico provides a wide range of adapters, mounting

brackets, tubing and distribution blocks for remote and
multi-point installations.
ACCESSORYITEMS
33401 Streamliner M Model Installation Kit
33402 Streamliner M Installation Kit (2 Point
33403 Streamliner M Installation Kit (4 Point)
DISTRIBUTION BLOCK
33381 4 outlet
33382 6 outlet
33383 8 outlet
The Distribution Block allows a single unit
to lubricate up to eight lubrication points
(Streamliner M and 500 cc unit only).
Streamliner M unit with a 4-outlet distribution block
www.tricocorp.com
800.558.7008
K6
STREAMLINERDC ELECTRO-CHEMICAL GREASE DISPENSERS
The Streamliner DC automatic single point lubricator offers

maintenance professionals the ability to keep equipment
properly lubricated. The key to the high degree of reliability
with the Streamliner DC is the innovative, fully-adjustable gas
generating power source. The power source generates gas
that creates a consistent pressure on a piston which gradually
and continuously dispenses the lubricant contained in the
chamber.
Delivery time is easily set with a simple twist of an allen key
on top of the unit. The dispensing time of the Streamliner
DC is variable between one and twelve months allowing
complete control over the amount of lubricant being applied.
The transparent housing provides visual confirmation of the SPECIFICATIONS
rate of delivery. Unlike opaque lubricators, one quick glance Grease Capacity 30, 60, or 125 cc
is all that is needed to see just how much lubricant is left in
the cartridge. Power Generation Hydrogen Gas Producing Dry Cells
Working Pressure Maximum 72 PSI (5 bar)
The light weight, compact design of the Streamliner DC
allows for installation in almost any place and any position, Dispensing Quantity 0.08 8.3 cc/day
even under water. Operating Temperature -4F to 131F (-20C to 55C)
Mobilgrease XHP 222
FEATURES
Exxon Unirex EP 2
Simple to install and activate Mobilith SHC 100
Powered by a patented gas generating dry cell Seven Standard Greases Mobilgrease FM 222
Adjustable time setting from 1 to 12 months reduces Mobilith SHC 220
inventory costs, less units to have available Mobilith SHC PM 460
Transparent chamber allows easy visual check of lubricant Mobil Polyrex EM
level
Thread Size NPT
Sealed point of contact prevents contamination with dirt
and water - submersible in any direction
SELECTION CHART
Easy adjustment of dispensing rate during operation
Model Model Model NLGI Thickener
Environmentally friendly 30 cc 60 cc 125 cc Grease Type # Type
Can be temporarily deactivated
Mobilgrease Lithium
Custom filling with grease or oil is available 33902 33922 33942 2
XHP 222 Complex
Intrinsically safe - Class I, II, III; Division 1; Groups A, B, C, Exxon Unirex Lithium
D, E, F, and G 33903 33923 33943 2
EP2 Complex
Mobilith SHC Lithium
33904 33924 33944 2
100 Complex
Mobilgrease Aluminum
33905 33925 33945 2
FM 222 Complex
33906 33926 33946 2
220 Complex
33907 33927 33947 1.5
PM 460 Complex
Mobil Polyrex
33908 33928 33948 2 Polyurea
EM
www.tricocorp.com
800.558.7008
K7
STREAMLINER ELECTRO-CHEMICAL GREASE DISPENSERS
Streamliner V Grease Dispensers are designed for applications where it is essential

to have precise amounts of grease delivered to critical machine parts and are a
cost-effective alternative to fully integrated lube systems or manual lubrication.
Streamliner V Grease Dispensers have a variable dispensing rate from 1 to 12
months and are controlled by a microprocessor to ensure reliable and predictable
lubricant delivery.
STREAMLINER V
Variable feed rate with electro-chemical drive
Pre-filled with one of six standard grease types
Microprocessor control
Large LCD display
Six variable dispensing rates 1, 2, 3, 6, 12 months, and purge
Auto purge cut-out Inert gas generation
Economical 125cc and 250cc reservoir capacities for fewer replacements Economical reservoir capacity
and less disposal Immediate stop/start
Indication of operation with green LED Disposable
Transparent reservoir for easy viewing of grease level
Unit can be deactivated and adjusted as necessary
SPECIFICATIONSV SERIES
Operating Temp. -4F to 140F
Max. Working Pressure 80 psi
Dispensing Rates 1, 2, 3, 6, 12 months, and purge
Grease Capacity 250cc
Thread Size 3/8" NPT
Anti-Explosive Certi Grade Ex ia I/II B T6 Streamliner V installed on a blower fan
SELECTION CHART ACCESSORY ITEMS

Model Model Model No. Description
Grease Type NLGI # Thickener Type
125cc 250cc
33400 Streamliner V Installation Kit
33336 33343 Mobilgrease FM 222 2 Aluminum Complex
33338 33345 Mobilith SHC PM 460 1.5 Lithium Complex
Custom grease filling is available. For specific terms and conditions please contact a Trico
Customer Service Representative.
www.tricocorp.com
800.558.7008
K8
STREAMLINER S GREASE DISPENSER
The Streamliner S is a self-contained unit that offers worry free operation.

It contains 5 different control settings, delivering the proper amount of
grease to the lubrication point. The unit has a double spring design at the
bottom of the grease dispenser, which pushes the grease upward into a
grease intake orifice, then down a guide tube and into the lubrication point.
This design provides a more uniform dispensing pressure, prevents hardening
of the grease, and allows the grease dispenser to completely empty its
contents.
FEATURES
F ive different control settings by simply turning the valve position indicator
located on top of the grease dispenser
Double spring design for more uniform dispensing pressure
Clear reservoir for easy viewing of grease levels
SPECIFICATIONS
Grease Capacity 100 cc (90 grams)
Operating Temperatures -10F 250F (-23C 121C)
Thread Connection 1/4" NPT
Suitable Greases NLGI 1 - NLGI 2
Spring Force 15 psi
SELECTION CHARTUNIT RECOMMENDED CONTROL SETTINGS

Model No. Description Bearing Shaft Diameter Up to 2 in or 50 mm
33392 Streamliner S Grease Dispenser Operating Condition Intermittent Coninuous
Bearing Type Shielded Open Shielded Open
Regardless of RPM 1 2 3 4
Bearing Shaft Diameter Over 2 in or 50 mm

Operating Condition Intermittent Coninuous
Bearing Type Shielded Open Shielded Open
Under 1,000 RPM 1 2 3 4
1,0003,000 RPM 3 3 4 4
Over 3,000 RPM 4 4 5 5
Control setting: 5 highest1 lowest
www.tricocorp.com
800.558.7008
K9
STREAMLINER MECHANICAL GREASE DISPENSERS
Streamliner grease dispensers apply a precise flow of

grease to critical machine parts. They are a cost-effective
alternative to fully integrated lube systems or manual
lubrication. The grease dispensers are ideal for industries
where high volumes of moisture, accelerated temperatures
and contamination are present. Their simplicity in operation
insures dependability and ease of service.
STREAMLINER GL-P
Mechanical spring loaded
Anodized aluminum base resists corrosion and works
well in high vibration applications
Clear reservoir for easy viewing of grease levels
Each unit supplied with three different spring sizes
for maximum versatility
SPECIFICATIONSGL-P SERIES
Refillable
Spring Force Light (5 psi), medium (10 psi),
Versatile and heavy (15 psi) included
with each model
Grease Capacity 21/2 ounces
Thread Size 1/8", 1/4", 3/8", and 1/2" NPT
Suitable Greases NLGI 0NLGI 3
PART NUMBERSGL-P SERIES

Model No. NPT Spring Force
33301 1/8
Light, medium,
33302 1/4 and heavy spring
33303 3/8 included with each
model
33304 1/2
www.tricocorp.com
800.558.7008
K10
GREASE METER
It is difficult to grease a bearing with the right amount of grease with a

grease gun. Most bearings are often given either too much or too little
grease causing a shortening of bearing life and often results in costly
breakdowns and stoppages. Tricos Grease Meter measures the amount
of grease dispensed from the grease gun to the equipment bearing.
A simple push of a button will set the meter to zero and the metering
can be started. The amount of grease dispensed is displayed on a digital
screen and can be expressed in cubic centimeters, grams, ounces, or
fluid ounces. With Tricos Grease Meter it is possible to grease exactly
to bearing manufacturers recommendations. This will increase the life
of the bearing and reduce the number of stoppages.
FEATURES
Digital screen displays grease dispensed in cubic centimeters, grams,
ounces, or fluid ounces
Backlit LCD displays large easy-to-read digits, including low battery
indication
Handles up to 10,000 psi working pressure
Unit can be calibrated for different greases
Precise measurement and control of grease delivery
Small, compact and lightweight design (.66 lb)
Corrosion free aluminum housing
SPECIFICATIONS
Housing Material Anodized Aluminum Grease meter being used with Spectrum Grease
Seals Buna-N Identification Products to ensure the right grease
goes into the right piece of equipment.
Working Pressure Max 10,000 psi (700 bar)
Flow Max 1000 cm3/min
Accuracy +/- 3% up to 4,300 psi (300 bar)
Display Lit LCD (4 digits / 9 mm)
Battery Type 1.5 V LR1 Alkaline (2x)
Suitable Greases Up to NLGI 2
Auto Shut Off 1 min
Weight .66 lb (.3 kg) Grease meter is easily installed onto a grease gun.
Connections 1/8" NPT
SELECTION CHARTGREASE GUNS
SELECTION CHART 36680 Lever Grease GunHeavy Duty
Model No. Description 36681 Pistol Grip Grease GunHeavy Duty
39350 Grease Meter 36682 Air Operated Pistol Grip Grease Gun
36683 12" Flexible Grease Gun Hose
www.tricocorp.com
800.558.7008
L1
INTRODUCTION TO CENTRAL LUBRICATION
SINGLE LINE RESISTANCE SYSTEMS Common applications are shown below. These are found on punch
Trico central lubrication products are commonly known as presses, milling machines, printing presses, injection molding
Single Line Resistance Systems. They are used throughout machines, textile machinery, and all types of machine tools.
industry where reliable oil lubrication is required. The basic
principles of these systems are:
Oil lubrication
Pump operation to deliver the oil to the system Ball Bearings Plain Bearings
Individual control of oil lubrication amounts at each
lubrication point
Meter and control units create resistance to flow to
apportion oil delivery
Total loss or re-circulating systems Flat Slides Cylindrical Slides
POSITIVE DISPLACEMENT
INJECTION SYSTEMS
Trico offers a line of products that complement the single line
resistance systems. Instead of using meter or control units, Ball Bearing Slides Cams
a piston dispenses a pre-set amount of oil at each cycle of
the pump. These systems do require that different pumps be
used than with single line resistance systems. All fittings and
tubings are interchangeable between the two systems.
Gears Chains
www.tricocorp.com
800.558.7008
L2
BASIC TYPES OF SYSTEMS
MANUAL PUMPS AUTOMATIC CYCLIC PUMPS CONTINUOUS PUMPS

These single-shot systems use a For those who need automatic lubrication For large lubrication requirements a
manually actuated pump for applications on an intermittent basis, a cyclic system continuous system should be used. These
where infrequent lubrication is required. is required. Cost for these systems are systems are commonly used on equipment
economical and vary based on the type with a high number of lubrication points.
FEATURES of control used to regulate the lube
interval and capacity of the reservoir. FEATURES
Low cost, simplified installation
and operation Gear pump design
Manual and spring discharge pumps FEATURES Constant oil volume outputs
Reservoir capacities to 450 cc Spring discharge and gear pumps
Reservoir capacities up to 20 liters
Applications with less than 50 points A djustable interval times
Applications with up to 200
between lubrication
Used with meter units lubrication points
Adjustable oil volume outputs
Total loss systems Used with control units
Reservoir capacities up to 20 liters
Total loss systems or
A pplications with up to 50 re-circulating systems
lubrication points
Used with meter units
Total loss systems
Manual or single-shot pumps use meter Automatic Cyclic pumps use meter units Continuous pumps use control units
units to apportion the amount of oil at to apportion the amount of oil at each to apportion the amount of oil at each
each lubrication point. lubrication point. lubrication point.
www.tricocorp.com
800.558.7008
L3
POSITIVE DISPLACEMENT INJECTORS
Positive Displacement Injectors (PDIs) are an excellent means of providing

oil lubrication to machinery. Using a piston principle, the PDI will lubricate
individual points with specific amounts of oil. There are 6 output sizes to
choose from: 0.06, 0.10, 0.16, 0.20, 0.30, and 0.50 ccs per cycle. A typical
system will include a pump, any number of PDIs, and the necessary tubing
and fittings.
At the start of the lubrication cycle, the PE-34 or PE-44 Series pump builds
pressure. Upon pressure build-up, the PDIs deliver the pre-set amount of
oil. At the end of the lubrication cycle, a pressure unloading valve opens to
return line pressure to 0 PSI. This allows the PDIs to reset for the next cycle.
HOW TO ORDER
1. For each lubrication point, select the appropriate Positive
Displacement Injector (PDI) based on the oil output per cycle.
2. Select the manifolds required for mounting that
simplify installation.
15
3. Select either a PE-34 Series Automatic Cyclic pump with M8 x 1.0 Thread
built-in cycle controls, or a PE-44 Series standard pump that Manifold PDI
uses external controls for the lubrication cycle. A choice of
reservoir capacities is available for both pumps. 1/8 BSPT
Outlet Thread
88
PDI SELECTION CHART
Output Volume
Model No. 5.8 (2)
(cc/cycle)
PDI-06 0.06 B
15 1/8 BSPT
PDI-10 0.10 Inlet
2 places
A
PDI-16 0.16
(Note:All dimensions are mm.)
PDI-20 0.20
PDI-30 0.30
PDI-50 0.50
PDI SPECIFICATIONS
Inlet Thread Size 1/8 BSPT
Outlet Thread Size M8 x 1.0
MANIFOLDS SELECTION CHART Operating Pressure 200 PSI
Dimensions (mm) Pump Required PE-34 or PE-44
Model No. No. of Outlets Oil Viscosity 30-250 CST (150-1250 SUS)
A B
PDM-42 2 47 37
PDM-43 3 62 52 MANIFOLD SPECIFICATIONS
PDM-44 4 77 67 Connection Port Thread Size No. of Ports
PDM-45 5 92 82 Inlet 1/8 BSPT 2
PDM-46 6 107 97 Outlet 1/8 BSPT 2 to 6
www.tricocorp.com
800.558.7008
L4
PUMPS FOR PDI SYSTEMS
PUMP SELECTION CHART

Model Reservoir Oil Delivery Interval Time
Pump Type
No. Capacity (liters) Time Between Cycles
PE-3403 3
Auto-Cyclic
PE-3406 with Integral 6
1999 sec 1999 minutes
PE-3408 Digital 8
Controls
PE-3420 20
PE-4403 Standard 3
PE-4406 Pump 6 User
for User User Installed
PE-4408 Installed 8 Installed
PE-4420 Controls 20
227
190 170
275
PUMP SPECIFICATIONS
PE-34 and PE-44 Series
3 Liter Reservoir Motor Voltage 110-150/60 Standard
220-150/60 Optional
Pump Type Gear Pump
355 (6L & 8L) 188 (6L) Maximum Pressure 200 PSI
480 (20L) 201 (8L)
338 (6L & 8L) 234 (20L)
457 (20L) Maximum Flow 100 cc/min
Output Connection 5/16-24 (f)
Seals Buna-N
290 (6L)
310 (8L) Oil Viscosity 30250 CST (150-1250 SUS)
470 (20L)
95 (6L & 8L)
190 (20L)

6, 8 and 20 Liter Reservoirs
www.tricocorp.com
800.558.7008
L5
PM-10 &20 SERIES MANUAL CYCLIC PUMPS
PM series pumps are used in applications where a fixed

output of lubricant is desired. With the PM-10 series,
the leverage of the pump handle enables the unit to
deliver a higher pressure than most models, providing
the ability to lubricate points having some back pressure.
With the PM-20 series, lubricant output takes place upon
release of the handle using spring discharge to assure
the correct amount of lubricant is applied. These pumps
are commonly used with meter units in single or multiple
point applications. Common applications include punch
presses and milling machines where infrequent but
reliable lubrication is required.
FEATURES
Aluminum die cast reservoir provides long life
Outputs cc/stroke
Sight gauge provides liquid level observation
Large fill port for easy adding of lubricant
Convenient drop-in filter in fill port keeps oil clean
SPECIFICATIONS
Reservoir Material Cast Aluminum

150 (8 cc) Pump Type PM-10 Series, Manual Piston Pump
100 (8 cc)
PM-20 Series, Spring Discharge Piston
Output Connection 5/16-24
Seals Buna-N
Operating Temp. 32120 F
110 (8 cc)
200 (8 cc)
SELECTION CHART
Pump Output Pressure Capacity
Model No.
Type cc/stroke (PSI) (cc)
PM-10 Series
Vertical
PM-1000-08 8 200 450
155 Mount
40 - 80 136
Horizontal 70
PM-2000-L 8 550
Mount (average)
Horizontal 70
PM-2000-R 8 550
Mount (average)
126
126 110
80
ACCESSORIES
PM-20 Series
Meter units, and fittings and accessories are available.
www.tricocorp.com
800.558.7008
L6
PE-10 &12 SERIES AUTOMATIC CYCLIC PUMPS
In heavy duty applications requiring a timed delivery of

lubricant, the PE 10 and 12 series automatic cyclic pumps
are used. These durable pumps provide long life and
trouble-free service. With variable lubricant outputs and a
choice of cycle times, they offer excellent versatility in many
applications. An adjustment screw with a calibrated rod
simplifies setting the lubricant delivery output. These pumps
are used with meter units in multiple point applications.
Common applications include punch presses, milling
machines, and other machine tools.
FEATURES
Transparent 2 liter reservoir simplifies viewing oil level
PE-1002-05
PE 12 series provided with low level switch to signal when
lubricant level is low
Adjustable output range of 3 to 6 cc/cycle, or 3 to 120 cc/hour
Large fill plug simplifies adding or changing lubricant
Convenient drop-in filter in fill port keeps oil clean HELPFUL TIP:
For assistance on designing a central
200
130 lubrication system, visit our website
175
at www.tricocorp.com/technical/
central-lub-worksheet.aspx.
225
SELECTION CHART
Interval Time Minimum Maximum Low
Output
Model No. Between Output Output Level
(cc/cycle) Cycles (min.) (cc/hour) (cc/hour) Switch
PE-1002-03 3 60 120
PE-1002-05 5 36 72
PE-1002-10 10 18 36
No
PE-1002-15 15 12 24
SPECIFICATIONS PE-1002-30 30 6 12
Reservoir Capacity 2 Liters PE-1002-60 60 3 6
Adjustable
Motor Voltage 110-150/60 PE-1202-03 36 3 60 120
Pump Type Spring Discharge Piston Pump PE-1202-05 5 36 72
Maximum Pressure 40 PSI PE-1202-10 10 18 36
Yes
Output Connection 5/16-24 (f) PE-1202-15 15 12 24
Seals Buna-N PE-1202-30 30 6 12
Operating Temp. 32120 F PE-1202-60 60 3 6
Add -220 to model number for 220 volt motor.
ACCESSORIES
www.tricocorp.com
800.558.7008
L7
PE-20, 22, & 24 SERIES AUTOMATIC CYCLIC PUMPS
FEATURES
PE-20 Series
Adjustable interval time between lubrication cycles of
up to 60 minutes
Heavy duty plastic reservoir simplifies oil level viewing
Choice of 6 cc or 15 cc output per cycle
Low level switch with alarm
PE-22 Series
PE-2002-15 PE-2202-06 PE-2402
up to 60 minutes
The PE-20 series pumps are designed for automatic cyclic systems Heavy duty plastic reservoir simplifies oil level viewing
with fewer than 50 points. These pumps are ideal for punch presses Choice of 6 cc or 15 cc output per cycle
and machine tools where small and consistent amounts of lubricant
are required. These pumps are used with meter units in multiple Low level switch with alarm
point applications. Pressure gauge
SPECIFICATIONS PE-24 Series

Reservoir Capacity 2 Liters Adjustable interval time between lubrication cycles of
110-150/60 Standard up to 180 minutes
Motor Voltage
220-1-50/60 Optional
Heavy duty plastic reservoir simplifies oil level viewing
Pump Type Gear Pump
Adjustable output cycle time of 1-180 sec., flow rate of
PE-20, 22 Series: 100 PSI 200 cc/min
Maximum Pressure
PE-24 Series: 70 PSI
Pressure gauge
Seals Buna-N
SELECTION CHART 205

165
Low Level 172-180
Interval Time Minimum Low Alarm and
Model No. Output Between Output Level Pressure
Cycles (cc/hour) Switch Gauge 110
PE-2002-06 6 cc/cycle 6
No
PE-2002-15 15 cc/cycle 0 min. 15 255
PE-2202-06 6 cc/cycle to 60 min. 6

PE-2202-15 15 cc/cycle 15 Yes
3.33 cc/sec. Yes
Variable 1 min.
PE-2402 1.1
delivery time to 180 min.
of 1-180 sec.
ACCESSORIES Meter units, and fittings and accessories are available.
www.tricocorp.com
800.558.7008
L8
PE-30 & PE-32 SERIES AUTOMATIC CYCLIC PUMPS
FEATURES
PE-30 & PE-32 Series
Pressure gauge
Heavy duty plastic reservoir (3 liter) simplifies oil level
viewing. Metal reservoirs available in 6, 8, and 20 liters
for larger systems.
PE-30 Series
Adjustable output cycle time of 1-180 seconds, flow rate
of 200 cc/min
3999 minutes
PE-3003 PE-3203
PE-32 Series
Adjustable output cycle time of 1-999 seconds, flow rate The PE-30 & PE-32 series are the most versatile automatic cyclic
of 250 cc/min pumps available. Both the lubricant dispensing time, and the
Adjustable interval time between lubrication cycles of time interval between cycles is digitally controlled. With reservoir
3999 minutes sizes up to 20 liters, these pumps can handle systems with up to
Pressure adjustment valve 100 lubrication points. Applications include large printing presses
Pressure switch, with reset button, shuts down pump if and injection molding machines. These pumps are used with
system pressure drops below set level, protecting against meter units in multiple point applications.
line or component failure
SPECIFICATIONS 188 (6L)
201 (8L)
338 (6L & 8L)
355 234 (20L)
Reservoir Capacity 3 Liter Plastic 460 (20L)
457
6, 8, and 20 Liter Steel
Motor Voltage 110-150/60 Standard

Pump Type Gear Pump 290 (6L)
310 (8L)
Maximum Pressure 100 PSI - PE 30 470 (20L)

140 PSI - PE 32 95 (6L & 8L)
190 (20L)
Seals Buna-N
Operating Temp. 32120 F 6, 8 and 20 Liter Reservoirs
SELECTION CHART 225

195 170
Reservoir Intrval Time* Minimum
Model No. Capacity Reservoir
Material Output Between Output
(liters) Cycles (cc/hour)
PE-3003 3 Plastic
3.33 cc/sec.
PE-3006 6 Variable
255
delivery
PE-3008 8 Metal time of
1180 sec.
PE-3020 20 3999
minutes .2
PE-3203 3 Plastic
4.17 cc/sec.
PE-3206 6 Variable 3 Liter Reservoir
delivery
PE-3208 8 Metal time of (Note:All dimensions are mm.)
1999 sec.
PE-3220 20
ACCESSORIES
www.tricocorp.com
800.558.7008
L9
PE-40 & PE-50 SERIES CONTINUOUS SYSTEM PUMPS
FEATURES
PE-40 and PE-50 Series
Standard float switch provides signal when lubricant level
is low
Easy view plastic reservoir on 3 liter models, steel
reservoir with sight gauge on 6, 8 and 20 liter reservoirs
Return to tank port available on 6, 8 and 20 liter models
for returning unused oil to reservoir
Provided with pressure gauge as standard
Safety relief valve assures reliable performance
PE-4003 PE-5003
PE-40 Series
Tricos continuous system pumps are designed for applications Pressure switch, with reset button, shuts down pump if
where lubrication of critical components is needed on a system pressure drops below set level, protecting against
continual basis, rather than on a timed basis. Using continuous line or component failure
system control units, these pumps provide lubricant at flow rates
of 250 cc/min. Common applications include injection molding,
printing presses, punch presses, and milling machines. 225
205
SPECIFICATIONS
Reservoir Capacity 3 Liter Plastic
6, 8, and 20 Liter Steel
Motor Voltage 110-150/60 Standard 265

Pump Type Gear Pump
Maximum Pressure 140 PSI
140
Seals Buna-N PE-40 and PE-50 160
3 Liter Reservoirs
328 (6L)
357 (8L)
SELECTION CHART 515 (20L)
Model No. Pressure Reservoir Reservoir Output 339 215 (8L)

Model No. (with 270 (20L)
(standard) to tankreturn
port) Switch
Capacity Material Volume
(liters) (cc/min)
PE-4003 3 Platic
PE-4006 PE-4206 6
Yes 259 (6L)
291 (8L)
PE-4008 PE-4208 8 Metal 388 (20L)
PE-4020 PE-4220 20
250
PE-5003 3 Plastic
PE-5006 PE-5206 6
No
PE-5008 PE-5208 8 Metal PE-40 and PE-50
6, 8 and 20 Liter Reservoirs
PE-5020 PE-5220 20 (Note:All dimensions are mm.)
*Refer to Accessories document for accessories on return to tank port pumps.
www.tricocorp.com
800.558.7008
L10
METER & CONTROL UNITS
METER UNITS
Inlet Meter units are used
Flow 5/16-24 x 5/16-24 x 1/8 NPT x M8 x 1.0 x M8 x 1.0 x 1/8 BSPT x
with all cyclic system Rate 5/16-24 1/8 NPT 1/8 NPT M8 x 1.0 1/8 BSPT 1/8 BSPT
electric and manual
Orfice pumps to provide 3/0 DSM-3/0 DCM-3/0 DTM-3/0
precise control of 00 DSM-00 DCM-00 DTM-00 DSM-00M DCM-00M DTM-00M
the lubricant to each 0 DSM-0 DCM-0 DTM-0 DSM-0M DCM-0M DTM-0M
lubrication point. A
1 DSM-1 DCM-1 DTM-1 DSM-1M DCM-1M DTM-1M
spring loaded check
Check valve keeps air from 2 DSM-2 DCM-2 DTM-2 DSM-2M DCM-2M DTM-2M
Valve entering the system 3 DSM-3 DCM-3 DTM-3 DSM-3M DCM-3M DTM-3M
when lubricant is not 4 DSM-4 DCM-4 DTM-4 DSM-4M DCM-4M DTM-4M
being supplied to the
Outlet 5 DSM-5 DCM-5 DTM-5 DSM-5M DCM-5M DTM-5M
meter unit.
CONTROL UNITS
Inlet
Control units are used Flow 5/16-24 x 5/16-24 x 1/8 NPT x M8 x 1.0 x M8 x 1.0 x 1/8 BSPT x
with all continuous Rate 5/16-24 1/8 NPT 1/8 NPT M8 x 1.0 1/8 BSPT 1/8 BSPT
system electric pumps 5/0 DCC-5/0 DTC-5/0
Orfice to provide precise
4/0 DSC-4/0 DCC-4/0 DTC-4/0
control of the lubricant
to each lubrication 3/0 DSC-3/0 DCC-3/0 DTC-3/0
point. Because pump 00 DSC-00 DCC-00
flow is continuous, an 0 DSC-0 DCC-0 DTC-0
internal check valve is
not required. 1 DSC-1 DCC-1 DTC-1 DSM-1M DTM-1M
2 DSC-2 DCC-2 DTC-2 DSM-2M DTM-2M
Outlet 3 DTC-3 DSM-3M
4 DSC-4 DCC-4
FLOW RATE CHART FOR 5 DSC-5 DTC-5 DCM-5M
METER AND CONTROL UNITS
Flow Rate Relative Flow Typical System Type
Delivery
5/0 1 Continuous loss
METER AND CONTROL UNITS
Trico offers 8 different flow rates for meter units (3/05)
4/0 2 Continuous loss
and 10 for control units (5/05). These units are precisely
3/0 4 Continuous loss/Cyclic manufactured to accurately apportion oil at each point. To
00 8 Continuous loss/Cyclic the left is a chart that displays recommended flow rates for
0 16 Continuous loss/Cyclic different types of systems.
1 32 Cyclic/Continuous re-circulating The relative flow delivery indicates the difference in the flow
2 64 Cyclic/Continuous re-circulating rates of the meter and control rates. The smallest flow rate is
5/0 and the highest flow rate is 5. Each meter and control
3 128 Cyclic/Continuous re-circulating unit will allow approximately twice as much flow as the next
4 256 Continuous re-circulating smaller size, within a lubrication system.
5 512 Continuous re-circulating
www.tricocorp.com
800.558.7008
L11
FITTINGS
FITTINGS
Illustration New Model No. T1 T2 Illustration Model No. T1 T2
FC-1002 5/16-24 5/16-24 T1 FE-1005 5/16-24 5/16-24
FC-1008 5/16-24 1/8 NPT FE-1000 5/16-24 1/8 NPT
FC-1000 1/8 NPT 1/8 NPT T2 FE-1012 1/8 NPT 1/8 NPT
T1 FC-1003 1/8 NPT 3/8-24 90 Elbow FE-1000M M8 x 1.0 M8 x 1.0
FC-1004 1/8 NPT 7/16-24
FC-1005 1/4 NPT 1/8 NPT Illustration Model No. T1 T2
T1
FC-1006 1/4 NPT 7/16-24 FE-1007 1/8 NPT 1/8 NPT
T2
T2
FC-1007 1/4-28 Zerk 1/4-28 Zerk FE-1013M 1/8 BSPT 1/8 BSPT
45 Street Elbow
FC-1002M M8 x 1.0 M8 x 1.0
FC-1000M 1/8 BPST 1/8 BSPT
Male Illustration Model No. T1 T2
Thread FC-1014 1/8 BPST 1/8 NPT
Connector FE-1007M M8 x 1.0 1/8 BSPT
FC-1015 M8 x 1.0 1/8 NPT T1
FC-1010M 1/4 BSPT 1/4 BSPT T2 FE-1011M M8 x 1.0 M8 x 1.0

90 Street Elbow FE-1010M 1/8 NPT 1/8 BSPT
FC-1017 1/8 BSPT 5/16-24
Illustration Model No. T1 T2

Illustration New Model No. T1 T2
FE-1002 5/16-24 1/8 NPT
FC-1009 5/16-24 5/16-24 T1 FE-1006 1/8 NPT 1/8 NPT
T1
FC-1012 5/16-24 1/8 NPT FE-1009 1/8 NPT 1/4-28 Zerk
FC-1018 1/8 NPT 1/8 NPT FE-1004M M8 x 1.0 1/8 BSPT
T2
FC-1009M M8 x 1.0 M8 x 1.0 FE-1003M M10 x 1.0 1/8 BSPT
T2 FC-1013M M10 x 1.0 M10 x 1.0 FE-1014M 1/8 BSPT 1/8 BSPT
FC-1012M M8 x 1.0 1/8 BSPT 90 Street Elbow FE-1005M
Female M8 x 1.0 1/4 BSPT
Thread FC-1011M M10 x 1.0 1/8 BSPT
Connector FC-1014M M14 x 1.5 M14 x 1.5 Illustration Model No. T1 T2
T1 FE-1015 1/8 NPT 3/8-24
T2 FE-1016 1/8 NPT 7/16-24
90 Elbow FE-1017 1/4 NPT 7/16-24
SWIVEL FITTINGS
Illustration Model No. T1 T2 Illustration Model No. T1 T2
FM-2004 1/4 NPSM 1/8 NPT FM-2001M M8 x 1.0 1/8 BSPT
T1 T2
T2 T1 FM-2002M 1/8 BSPT 1/8 BSPT
Swivel Adapter FM-2005 1/4 NPSM 1/4 NPT
(male thread) FM-2000 1/8 NPT 1/8 NPT
Illustration Model No. T1 T2 T1 T2 FM-2000M 1/8 BSPT 1/8 BSPT
FE-2006 1/8 NPSM 1/8 NPT

T1 T2
FE-2007 1/4 NPSM 1/4 NPT
Swivel Adapter
(Female thread) FE-2008 3/8 NPSM 3/8 NPT
www.tricocorp.com
800.558.7008
L12
FITTINGS
FITTINGS
Illustration New T1 T2 Illustration Model No. T1 T1
Model No.
T1 FB-1002 5/16-24 5/16-24
FA-1007 5/16-24 1/8 NPT
FB-1000 5/16-24 1/8 NPT
FA-1008 1/8 NPT 1/8 NPT
FB-1002M M8 x 1.0 M8 x 1.0
FA-1000 1/4 NPT 1/8 NPT T2
FB-1003M M10 x 1.0 M10 x 1.0
FA-1001 5/16-24 5/16-24 Straight FB-1000M M8 x 1.0 1/8 BSPT
FA-1009 5/16-24 1/4-28 Zerk Bulkhead
Connector FB-1001M M10 x 1.0 1/8 BSPT
FA-1003 3/8-24 1/8 NPT
FA-1005 1/8 NPT 5/16-24 Illustration Model No. T1 T2
T1 FA-1004 1/8 NPT 1/4-28 Zerk FM-1003 3/8 NPT 1/8 NPT
FA-1023 5/16-24 1/8 BSPT FM-1004 3/8 NPT 1/4 NPT
FA-1024 1/8 NPT M6 x 1.0 T1 T2 FM-1005 1/2 NPT 1/8 NPT
FA-1025 1/8 NPT M8 x 1.25 FM-1006 1/2 NPT 1/4 NPT
FA-1026 1/8 NPT M10 x 1.5 Reducer FM-1007 1/2 NPT 3/8 NPT
Bushing
FA-1007M M8 x 1.0 1/8 BSPT FM-1008 3/4 NPT 1/4 NPT
T2
Adapter FA-1006M M10 x 1.0 1/8 BSPT
TB-12 or TC-12 TN-12
FA-1013M M8 x 1.0 1/4 BSPT Metal Tubing Plastic Tubing
FA-1015M 1/8 BSPT M10 x 1.0
FA-1014M 1/8 BSPT M8 x 1.0 FM-3000 Nut FM-3000 Nut
FA-1011M M10 x 1.0 M8 x 1.0

FA-1010M M10 x 1.0 PT 1/4 FS-1000 Sleeve FS-1002 Sleeve
FA-1017M M8 x 1.0 M6 x 1.0

FA-1023M M8 x 1.0 M10 x 1.0 Tubing DCM Meter Unit
FA-1012M M10 x 1.0 M10 x 1.0 Connections for or
Male Threads DCC Control Unit
FA-1017 1/8 BSPT 1/8 NPT
FA-1018 M8 x 1.0 1/8 NPT
FA-1020 5/16-24 M8 x 1.0 Tubing 5/16-24 Female Threads
FA-1021 M8 x 1.0 5/16-24 Connections
for Female FS-1000 Sleeve FM-1000
FA-1022 1/8 NPT 1/8 BSPT Threads Bushing
COMPRESSION FITTINGS
Model Model
Illustration Description Size Size
No. No. TB-12 or TC-12
Metal Tubing
FM-1001M M8 x 1.0
5/16 Hex
Bushing FM-1000 5/16-24 FM-1002M M10 x 1.0 TUBING - 12 FOOT LENGTHS
Illustration Material Model
Nut FM-3000 FM-3000M M8 x 1.0 Tube Model Tube
No. Size No. Size
Metal Copper TC-12 5/32 TC6-12M
Sleeve FS-1000 FS-1004M 6 mm 6mm
5/32 (4mm) TN6-12M
(4mm) Nylon TN-12
Nylon FS-1002
Half-Sleeve
www.tricocorp.com
800.558.7008
L13
FITTINGS &HOSES
JUNCTIONS HOSES
Inch Threads Metric Threads Dimensions(in.)
No. of Model No. Diameter
Illustration Metric A B
Ports Model No. Thread Size Thread Size
Model No. H-406 6 8
2 J-02 J-02M H-412 12 14

H-424 5/32 24 26
H-436 (4 mm) 36 38
3 J-03 J-03M
H-448 48 50
4 J-04 J-04M H-460 60 62
H-612 12 14
4 JS-04 JS-04M H-624 6 mm 24 26
Diameter
5 JS-05 JS-05M H-636 Hose 36 38
6 JS-06 JS-06M H-648 48 50
7 JS-07 JS-07M
5/16-24 MB x 1.0
8 JS-08 JS-08M
A
9 JS-09M BB
10 JS-10 JS-10M
12 JS-12 JS-12M
4 JD-04 -
6 JD-06 -
8 JD-08 JD-08M
10 JD-10 -
12 JD-12 JD-12M
T2
3 JH-03 JH-03M
T1 T2 1/8 NPT (T1) 1/8 BSPT (T1)
T2 T2 x x
5/16-24 (T2) M8 x 1.0 (T2)
4 JH-0402 JH-0402M
T1 T2
Illustration Model No. Thread

FM-5000 1/8 NPT
Tee Coupling FM-5001 1/4 NPT
www.tricocorp.com
800.558.7008
L14
ACCESSORIES
PLUGS REPLACEMENT STEEL RESERVOIRS

Inch Threads 6 Liter 8 Liter 20 Liter
Illustration
Model No. Size MR-1006 MR-1008 MR-1020
MR-2006 MR-2008 MR-2020
FP-1003 5/16-24 with return to with return to with return to
tank port tank port tank port
FP-1002 5/16-24
TUBING CLIPS
FP-1001 1/8 NPT Illustration
New Tube Size
Model No.
PRESSURE GAUGES
Model Connection Pressure Model Connection Pressure 1 FT-1001M
Illustration 5/32
No. Thread Range No. Thread Range 2 FT-1004M (4mm)
MG-1000 015 Bar MG-1002 1/8 BSPT 015 Bar 3 FT-1006M
1/8 BSPT
Bottom 1 FT-1003M
Rear Mount 6mm
MG-1001 035 Bar MG-1003 Mount 035 Bar 2 FT-1005M
CHECK VALVES - 5 PSI

Flow Inch Threads Metric Threads
Illustration Direction Thread Size Thread Size Metric Thread Size Thread Size
Towards Model No. (T1) (T2) Model No. (T1) (T2)
T1 FV-1006M 1/8 BSPT M8 x 1.0
T2 FV-1001 1/8 NPT 5/16-24
T2 FV-1007M 1/8 BSPT M10 x 1.0
T1 FV-1004M 1/8 BSPT M8 x 1.0
T2
T1 FV-1000 1/8 NPT 5/16-24
FV-1003M 1/8 BSPT M10 x 1.0
T2 FV-1002M 1/8 BSPT M8 x 1.0
T1 FV-1002 1/8 NPT 5/16-24
T1 FV-1005M 1/8 BSPT M10 x 1.0
T2 FV-1008M 1/8 BSPT M8 x 1.0
T2 FV-1008 1/8 NPT 5/16-24
T1 FV-1009M 1/8 BSPT M10 x 1.0
ITEMS FOR PUMPS WITH RETURN TO TANK PORTS Illustration Model No. Thread Size
Model No. MM-6000
Horsepower 1/4 MF-6000 1/4 NPT
Type Fully closed
Output 250W Filter
Pole 4P
Theoretic l/min Discharge
Time Interval Continuous Capacity Max.
Model Discharge Max. Thread
Pressure
Motor Revolution 1400/1700 RPM No. Capacity 1500 1800 (Kgf/cm2)
RPM Size
(cc/rev) RPM RPM
Voltage 110V
Frequency 50/60 Hz Oil Feed Pump MP-6000 2.5 3.7 l/min. 4.5 l/min. 5 1800 1/4 NPT
www.tricocorp.com
800.558.7008
L15
TECHNICAL INFORMATION
OIL SELECTION FOR

CENTRAL LUBRICATION
Many manufacturers of equipment that use TEMPERATURE VISCOSITY RELATIONSHIP
central lubrication systems will recommend
the specific lubricating oil to be used. If a
particular oil is not recommended, then
several factors must be considered. Load and
7,000
friction elements of surfaces to be lubricated
are a primary consideration. The ambient
temperature during machine operation,
and also the speed of the equipment are 6,000
significant factors. The viscosity of the oil is
a measure of how the oil flows at a given
temperature. Both the temperature and
the operating pressure will determine the 5,000
resistance to flow of the oil. As the pressure
Viscosity -SUS
or temperature increases, the oil delivery rate

is increased. 4,000
SAE 70
Always use clean oil in central lubrication
systems. Contamination in the oil will
significantly shorten the life of the surfaces 3,000
being lubricated. Synthetic lubricants tend SAE 60
to be more stable than mineral based ones.
However, some synthetic lubricants can attack
standard seal material, and seal compatibility 2,000
SAE 50
must be checked before using any oil type.
To insure the correct choice of lubricating oil, SAE 40
consult the machinery manufacturer or OEM. 1,000 SAE 30
SAE 20
VISCOSITY OF OIL SAE 10
LUBRICANTS
70 80 90 100
Trico pumps are designed to dispense mineral
based lubricants with a viscosity range of 30-250 Operating Temp. - F
centistokes or 150 - 1200 SUS. New clean oil
is always recommended and users should
check with machine manufacturers for the
recommended lubricant for their equipment.
METRIC CONVERSION CHART

1 oz. 30 ml./30cc.
1 pt. .473 liters
1 qt. .946 liters
1/2 gal. 1.89 liters
1 gal. 3.785 liters
www.tricocorp.com
800.558.7008
L16
USING THE SYSTEM DESIGN WORKSHEET
INSTRUCTIONS - Follow the instructions as listed below using the worksheet. The worksheet is designed for cyclic
systems. For assistance with continuous systems, contact Trico.
STEP 1 - List the lubrication points in the system.

In column A, list each lubricant point by description.
STEP 2 - Determine the lubrication required at each point.

In column B, write the lubrication delivery required at each point in cc/hr. Enter the total delivery required in the total box. Refer to
the specification from the machinery manufacturer whenever possible. The Lubricating Calculations table below can be used as a
guide in determining lubrication requirements.
STEP 3 - Determine the flow ratios for each lubrication point.

Find the lubrication point requiring the least amount of oil. Divide each of the Lube Delivery Reqd values by that amount. Enter
these values in column C. This will determine the ratio of lubrication required between all of the lubrication points.
LUBRICATING CALCULATIONS
If the amount of lubrication needed is not specified by the equipment manufacturer, this table can be used as a guide.
Illustration Application Oil Required in cc/hour
.10 x bearing diameter (in.) x number of rows or bearings
Ball Bearings
.04 x bearing diameter (cm.) x number of rows or bearings
.15 x bearing shaft diameter (in.) x bearing length (in.)
Plain Bearings
.023 x bearing shaft diameter (cm.) x bearing length (cm.)
.04 x [slide length (in.) + travel (in.)] x slide width (in.)
Flat Sides
.006 x [slide length (cm.) + travel (cm.)] x slide width (cm.)
.15 x [slide length (in.) + travel (in.)] x slide diameter (in.)
Cylindrical Slides
.023 x [slide length (cm.) + travel (cm.)] x slide diameter (cm.)
.03 x slide length (in.) x number of slides or rows
Ball Bearing Slides
.012 x slide length (cm.) x number of slides or rows
.08 x surface area (sq. in.)
Cams
.013 x surface area (sq. cm.)
.30 x gear pitch diameter (in.) x face width (in.)
Gears
.046 x gear pitch diameter (cm.) x face width (cm.)
.05 x length of chain (in.) x width (in.)
Chains
.008 x length of chain (cm.) x width (cm.)
www.tricocorp.com
800.558.7008
L17
USING THE SYSTEM DESIGN WORKSHEET
D E F
C Ratio
SIZING CHARTS C Ratio D E F
From To
Multip. Flow
Rate
Q
Value
Multip. Flow Q
D E F
C Ratio From To Rate Value 1.00 1.50 1 3/0 1.25
Multip. Flow Q
From To Rate Value 1.00 1.50 1 00 2.5 1.51 3.00 2 00 2.50
1.00 1.50 1 0 5 1.51 3.00 2 0 5 3.01 6.00 4 0 5
1.51 3.00 2 1 10 3.01 6.00 4 1 10 6.01 12.00 8 1 10
3.01 6.00 4 2 20 6.01 12.00 8 2 20 12.01 24.00 16 2 20
6.01 12.00 8 3 40 12.01 24.00 16 3 40 24.01 48.00 32 3 40
12.01 24.00 16 4 80 24.01 48.00 32 4 80 48.01 96.00 64 4 80
24.01 48.00 32 5 160 48.01 96.00 64 5 160 96.01 192.00 128 5 160
CHART 1 CHART 2 CHART 3
STEP 4 - DETERMINE WHICH OF THE THREE SIZING CHARTS TO USE.

Find the highest ratio listed in Column C. If the highest value is 48 or less, then use sizing chart 1 in step 5. If it is between 49 and 96,
then use chart 2 in step 5. If it is between 97 and 192, then use chart 3 in step 5.
STEP 5 - MULTIPLIER, FLOW RATE, AND Q VALUE AMOUNTS.

Referring to Sizing Chart 1, 2, or 3, fill in the appropriate multiplier, flow rate, and Q value for each lubrication point. Enter the totals
for the multipliers and Q values in the total boxes.
STEP 6 - CALCULATE ACTUAL DELIVERY FOR EACH LUBRICATION POINT.

To confirm the actual delivery that each lubrication point will receive, the following calculation is done. For each lubrication
point, divide the total oil required in the system by the total of all the multipliers. Multiply that number by the multiplier for that
lubrication point. Record the amount in column G.
STEP 7 - CHECK FOR FLOWABILITY.

Divide the viscosity of the oil (SUS at operating temperature), by the total of all the Q values for the system. If the result of that
calculation is 61 or less then the system has flowability. If the result is higher than 61, larger meter units are required. Increase each
meter unit flow rate value by one size. Add the new Q values that correspond, and repeat the calculation. Continue to do this until
the flowability calculation is 61 or less.
STEP 8 - SELECT THE APPROPRIATE PUMP.

Using the pump selection chart, select a pump best suited for the application.
STEP 9 - CHOOSE THE APPROPRIATE METER UNITS.

Column E has the designated flow rate for each of the meter units. Select the meter unit with thread configuration best suited for
each application point.
www.tricocorp.com
800.558.7008
L18
SYSTEM DESIGN WORKSHEET

Please visit our website for assistance on designing a central lubrication system at
www.tricocorp.com/technical/central-lub-worksheet.aspx.
Machine:_______________________________________________________________________
Lubricant:_______________________________ Viscosity:__________________ SUS at______F Oper. Temp.
Prepared By:_______________________________________________ Date:_________________
CRatio G
Lube B Lube D E F Actual
Between
Point A Lubricant Point Description Delivery Multiplier Flow Rate Q Value Delivery
Lube
No. Reqd cc/hr cc/hr
Points
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
HELPFUL TIP: Delivery Total Multiplier Total Q Value Total
The above worksheet is for

designing an automatic cyclic
system. When designing a
continuous system, please
contact Tricos customer
service for assistance.
www.tricocorp.com
800.558.7008
L19
PRODUCT SELECTION CHARTS
INSTRUCTIONS METER UNITS

Find the Flow Rate value for 5/16-24 5/16-24 1/8 NPT M8 x 1.0 M8 x 1.0 1/8 BSPT
Flow
each lubrication point. This x x x x x x
FLOW DIRECTION
Rate 5/16-24 1/8 NPT 1/8 NPT M8 x 1.0 1/8 BSPT 1/8 BSPT
corresponds to the flow
rate values in the Meter 3/0 DSM-3/0 DCM-3/0 DTM-3/0
Units chart. Select the 00 DSM-00 DCM-00 DTM-00 DSM-00M DCM-00M DTM-00M
mounting configuration best
suited for the application.
Additional information 1 DSM-1 DCM-1 DTM-1 DSM-1M DCM-1M DTM-1M
regarding the mounting 2 DSM-2 DCM-2 DTM-2 DSM-2M DCM-2M DTM-2M
configuration is found on 3 DSM-3 DCM-3 DTM-3 DSM-3M DCM-3M DTM-3M
the opposite page.
CONTROL UNITS
Flow 5/16-24 5/16-24 1/8 NPT M8 x 1.0 M8 x 1.0 1/8 BSPT
x x x x x x
Rate 5/16-24 1/8 NPT 1/8 NPT M8 x 1.0 1/8 BSPT 1/8 BSPT
5/0 DCC-5/0 DTC-5/0
4/0 DSC-4/0 DCC-4/0 DTC-4/0
3/0 DSC-3/0 DCC-3/0 DTC-3/0
FLOW DIRECTION
00 DSC-00 DCC-00 DTC-00
0 DSC-0 DCC-0
1 DSC-1 DCC-1 DTC-1 DSC-1M DCC-1M DTC-1M
2 DSC-2 DCC-2 DTC-2 DSC-2M DCC-2M DTC-2M
3 DTC-3 DSC-3M DCC-3M
4 DSC-4 DCC-4 DSC-4M DCC-4M
5 DSC-5 DTC-5 DCC-5M
INSTRUCTIONS Find the total oil required for all lubrication points. Select a pump that is in the desired flow
range. Refer to the Trico catalog for information on the specific features of the different pumps.
SELECTION CHART FOR AUTOMATIC CYCLIC PUMPS

PE-3003, PE-3006, PE-3020, PE-3203, PE-3206, PE-3208, PE-3220, PE-2402
PE-2002-15, PE-2202-15
PE-2002-06, PE-2202-06
PE-1002-03
Pump Types
PE-1202-03
PE-1002-05
PE-1202-05
PE-1002-10
PE-1202-10
PE-1002-15
PE-1202-15
PE-1002-30
PE-1202-30
PE-1002-60
PE-1202-60
0 1 2 3 6 12 15 18 24 36 60 72 120 360 500
Oil Required - cc/hr
www.tricocorp.com
800.558.7008
L20
DISTRIBUTION NETWORK DESIGN
Selecting the distribution network components begins with a sketch or layout of the system. Hardware will be different when
the lubrication points are some distance apart or are close together. Many systems will be combinations of distant and close
lubrication points. The general sequence is A) Select the pump location B) determine how your meter units or control units will
mount at each point and C) develop interconnecting plumbing.
A. Pump Location
Several key considerations are:
1. Install the pump to be visible to the machine operator or maintenance person. This will simplify checking lubricant levels.
2. Make sure that there is easy access for refilling the reservoir.
3. Access to electricity for automatic pumps should be convenient and safe.
4. Generally, the pump is mounted lower than the majority of the points being lubricated to avoid trapped air.
B. Meter Unit or Control Unit Installation

There are three mounting options to choose from in both meter units and control units.
1. Direct Mounting
In these applications, the meter or control unit is connected directly to the lubrication point and a single line is connected
to it (fig. 1). One end of the meter or control unit is NPT or BSPT and the other end is a 5/16-24 or metric straight thread.
TB-12 or TC-12 TN-12

Metal Tubing Plastic Tubing
FM-3000 Nut FM-3000 Nut
Figure 1
FS-1000 Sleeve FS-1002 Sleeve
5/16-24 DCM Meter Unit

or
DCC Control Unit
NPT
2. Tee Mounting
In these applications, the meter or control unit is connected directly to the lubrication point and a junction is connected
on the other end (fig. 2). Both ends of the meter or control unit are NPT or BSPT.
JH Series Junction
Figure 2
NPT
DTM Meter Unit
or
NPT DTC Control Unit
www.tricocorp.com
800.558.7008
L21
DISTRIBUTION NETWORK DESIGN
3. Remote Mounting
In these applications, the meter or control unit is not connected to the lubrication point. One end of the meter or
control unit is connected to a junction, and the other end is connected to tubing that goes to the lubrication point
(fig. 3). Both ends of the meter or control unit are 5/16-24 or metric straight threads.
J, JD or JS Series
Junction
5/16-24
FS-1000 Sleeve 5/16-24

FS-1002 Sleeve
Figure 3
FM-3000 Nut
FM-3000 Nut
TB-12 or TC-12
Metal Tubing
TN-12
Plastic Tubing
C. Interconnecting Plumbing
There are several considerations to make when connecting a central lubrication system.
1. Tubing Type - Metal or plastic tubing are the 2 choices available. When using metal tubing, copper tubing is the easiest
to install. Steel is stronger, but more difficult to install.
2. H oses - When connecting lubrication points that move, the use of a hose is recommended. Allow adequate hose length
to prevent kinking, stretching, or twisting.
3. T ubing Fittings - Refer to figures 1, 2, and 3 for examples of how the tubing fittings connect. When connecting tubing
to a female thread, use the FM-1000 series bushings in place of the FM-3000 series nuts (fig. 4).
5/16-24 Female Threads

FS-1000 Sleeve
FM-1000 Bushing
Figure 4
TB-12 or TC-12
Metal Tubing
4. Pressure gauges - Pressure gauges should be installed in central lubrication systems to verify that adequate oil pressure
is getting to each lubricant point. Depending on the size of the system, one or more gauges may be installed at
different points. A gauge installed at the furthest point from the pump is useful in determining if the entire system is
receiving adequate oil pressure.
5. Check valves - Check valves are used to hold pressure in a line and prevent dripping and leaking. Meter units contain
internal check valves, and control units do not need check valves because of the constant flow. Separate check valves
can be installed when the meter unit is not located at the point of lubrication. Installing the check valve between the
meter unit and the lubricant point will maintain an oil supply in the lubrication line.
www.tricocorp.com
800.558.7008
M1
INTRODUCTION TO MINIMUM QUANTITY LUBRICATION
F or over a decade, the concept of minimum quantity lubrication, sometimes referred to as near dry machining, has been
suggested as a means of addressing environmental concerns and occupational hazards associated with airborne mist. In most
instances, when cutting fluids are used, an airborne mist is released into the air that eventually falls to shop floors, causing
concern for employee health and safety. By minimizing the use of cutting fluids economical benefits can be achieved; such as
reduced costs of lubricant and disposal, as well as machine and workpiece cleaning time.
WHAT IS MINIMUM QUANTITY LUBRICATION?

The basic principal of minimum quantity lubrication is the utilization of precision dispensers to apply the smallest amount of
lubricant (typical applications use 1 oz. of lubricant in an 8-hour shift) needed to effectively perform the metal cutting operation.
These dispensers help eliminate friction at the tool chip interface by minimizing the heat that can be generated. Special lubricants,
such as Tri-Cool MD-1 and MD-7, are used with these dispensers which are virtually consumed during the machining operation,
resulting in residue-free machine surfaces and work pieces, and the elimination of airborne mist.
BENEFITS OF MINIMUM QUANTITY

LUBRICATION
When using minimum quantity lubrication dispensers,
the following benefits will be achieved:
Increased tool life
Increased material removal
Improved tolerances
Improved surface finish
No sump maintenance
Less machine downtime
No coolant disposal costs
Higher resale value of chips
Elimination of airborne mist
Minimum quantity lubrication used on a horizontal saw
Minimum quantity lubrication used during a milling operation Minimum quantity lubrication used on a tapping workcenter
www.tricocorp.com
800.558.7008
M2
MD-1200 MICRO-DROP
The MD-1200 Micro-Drop dispenser provides a cost effective

solution when flood cooling is impractical or unavailable.
When used in milling, tapping, and sawing applications, the
MD-1200 dispenses small amounts of Tri-Cool Micro-Drop
synthetic or vegetable based lubricant. Compared to flood
cooling, there is no coolant sump to maintain or used coolant
to dispose of. The MD-1200 offers higher material removal
rates, improved part finish, longer tool life, and tighter
dimensional tolerances.
Solenoid versions allow these units to be interfaced with CNC
controls or other signaling devices. The pressurized delivery
system of the MD-1200, provides instant on/off performance
when used with the solenoid control.
30802
SPECIFICATIONS 6
10.09
System Type Pressure Delivery, Non-Cyclic
Delivery Lines 6 ft. Polyurethane
7.06
Nozzles 18 Loc-Line or 13 Copper
Liquid Flow Range 2-16 Drops/Minute
Liquid Viscosity 50-200 SUS
7.06
Inlet Air Pressure 60-125 PSI
Recommended Air Filter 40 Micron
Air Consumption 1.7 CFM/Line
Air Inlet Fitting 1/4 NPT
Solenoid Voltages 120V 60Hz
Dimensions 7.06 H x 10.09 W x 7.06 D
Reservoir Capacity 16 oz.
SELECTION CHART HELPFUL TIP:

Model No. Model No. with The MD-1200 Micro-Drop should not be
with Lock-Line Description
Copoper Nozzles used with a water-soluble coolant. These
Nozzles
30801 30813 1 Line, Manual On/Off types of fluids will damage and clog
30802 30814 2 Line, Manual On/Off system components. Trico offers a line
of lubricants that is ideal for use with
30805 30817 1 Line, Solenoid On/Off
the MD-1200. Please see Tri-Cool Fluids
30806 30818 2 Line, Solenoid On/Off
document for Tri-Cool MD-1 and MD-7.
www.tricocorp.com
800.558.7008
M3
MD-1200 MICRO-DROP
OPTIONS
Copper Nozzles replace the flexible plastic lines
in applications where the nozzle position is
fixed. Copper nozzles are supplied straight, and
are easily bent to the desired nozzle position.
Magnetic Mounting Kit -
Model No. 30687
Simplifies mounting when used
in portable applications.
Positive pressure design gives

Typical applications instant fluid delivery for faster
use 1 oz. of cycle times.
lubricant in an The MD-1200s anti-siphon valves
8-hour shift. permit the nozzles to be mounted
in any position.
Relative liquid scale

allows repeatable set-
ups and saves time in Independent controls allow for
adjusting flow rates for maximum flexibility in adjusting
different applications. liquid and air flow for each nozzle.
High energy nozzle design

eliminates fogging for
Simple easy-to-use cleaner environment and
controls. No confusing greater chip clearing
timer to set. power, allowing faster
speed and feeds.
REPLACEMENT NOZZLE TIP

20024R Nozzle Tip for Plastic or Copper Nozzle
www.tricocorp.com
800.558.7008
M1
N1
INTRODUCTION TO SPRAY COOLING

The need for providing coolant to metal removal operations is METAL REMOVAL FACTS
readily accepted in machining industries. Spray cooling provides
1. Metal removal methods generate friction. Two types of
the benefits of coolants used in flood applications with the
friction generate heat:
added performance of a high velocity air/coolant mixture. It is
used where high speed tools and saw blades require powerful a. External friction, where approximately a third of the heat
chip clearing, and offers coolant application where flood is generated, metal to metal contact of the work tool to
cooling is inadequate. In addition, spray cooling is also used in the work piece
processes that generate high amounts of heat at the tool chip b. Internal friction, where approximately two-thirds of
interface. Delivering a low volume of coolant at a high velocity, the heat is generated, resistance of metal atoms to
spray cooling is able to remove heat as fast as possible, which movement when the metal is deformed in the shear zone
is critical in maximizing productivity and quality. Also, it helps 2. There are many variables at the interface of the tool and
keep expendable tooling costs in line. Trico offers three separate the work piece that influence the effectiveness of your cut.
types of delivery systems for dispensing a wide range of coolants a. Tool material, tool design, tool size, speed of tool, depth
in many metal removal processes: siphon, pump, and pressure of cut, feed rate, work piece material, type of operation,
delivery. type of equipment, and coolant/lubricant method are
SIPHON DELIVERY SYSTEMS just some of these variables.
Siphon type units use the flow of air across an orifice to 3. Equipment, operation, tooling, material, part quantity,
draw or pull fluid from the reservoir to the nozzle tip. There secondary operations, and safety could dictate the method
are no moving parts. These siphon type units cover a range of cooling/lubricating to use.
of applications from light to moderate with up to six nozzle a. Equipment: flood system ready, compressed air
capability. The use of multiple nozzles allows adequate coverage b. Operation: milling, drilling, tapping, sawing, etc
when tool sizes are large or heat generation is great. Typical c. Tooling: carbide, diamond, ceramics, special coatings
locations for use would be machine shops, tool rooms, prototype d. Material: brass, aluminum, steel, stainless, plastics
areas, or small machining work cells. These units are economically e. Part quantity: one to ten, short runs, long runs (cycle time)
priced and can cover secondary machining applications not f. Secondary operations: plating, anodizing, painting,
equipped with coolant capabilities. Drilling, tapping, milling, machining
turning, sawing, etc. are examples of applications that can be g. Safety: work piece handling in fixtures or chucking,
improved with the various siphon units that are offered. work area
4. There is no single method that works best in all
PUMP AND PRESSURE DELIVERY metalworking applications
SYSTEMS a. Cutting fluids do one or more of the following functions:
For more sophisticated and demanding metal removal processes, i. Cool the tool, work piece and chip
or where more than six nozzles are necessary, the pump or ii. Reducing friction by minimizing erosion of the tool
pressure type delivery systems are recommended. These are also by lubricating
recommended for higher viscosity fluids, up to 1000 SUS. The iii. Remove chips from the work area
pump type uses a mechanical iv. Protect the work piece, tooling and machine
pump to force fluid from the from corrosion
reservoir and the pressure 5. The application method needs to apply the fluid properly
type uses an air pressurized to achieve any or all of the above functions economically
reservoir to force fluid to the 6. Spindle speed, feed rate and depth of cut can also
nozzles. With the coolant being determine your method
delivered with positive pressure a. Spindle speed, high, intermediate, low - cool or lubricate
in either case, a wide range i. High speed requires more cooling
of coolant stream definition ii. Intermediate speeds require both cooling and
can be attained. From air lubricating
only to mini-flood streams, iii. Low speeds require more lubricating
the wide range available for b. Feed rate
adjustment, allows the user i. Quicker feed rates generate more heat and requires
Spray cooling during milling operation
to set delivery to the specific more cooling
application requirements. Applications covered by these systems ii. Slow feed rates require more lubricating
include dedicated secondary machines, transfer lines, conveyors, c. Depth of cut
large capacity tooling, through the tool and machining cells. The i. Chip evacuation, cooling and lubricating required
multiple nozzle/valve combinations also allow for customizing
systems specific to end user applications.
www.tricocorp.com
800.558.7008
N2
DL & DL MAGNUM
The DLand DL Magnum spray cooling systems provide cooling solutions for light duty machining and tool room applications.
These dispensers are easy to install requiring only shop air and dropping the siphon line into a coolant tank.
FEATURES
DL
Siphon delivery system
7 in. flexible segmented nozzle
Solid brass precision needle valve and body
7 ft. coolant pickup line with stainless steel filter
Sturdy 60 lb. magnetic base with mounting arm
Assembles in less than five minutes
30660
DL Magnum
15 in. heavy duty metal nozzle conduit
Advanced nozzle design for increased chip clearing power
and reduced overspray
Independent air and liquid controls
6 ft. coolant pickup line with stainless steel filter
Sturdy 60 lb. mounting magnet
Check valve minimizes delay of fluid upon start-up
BSPT threads (green model numbers) are available
SPECIFICATIONS
DL DL Magnum
Valve Body Brass Plated Brass
30633 Seals Buna-N Buna-N
Siphon Line Polyurethane Polyurethane
Filter Element 40 x 40 Mesh 40 x 40 Mesh
SELECTION CHART Stainless Steel Stainless Steel
Pressure 50-100 PSI 60-120 PSI
Model Description
No. Air Inlet 1/8 NPT 1/4 NPT or 1/4 BSPT
30660 DL Dispenser Fluid Type Water based Water based
30655 DL Dispenser w/ 1 qt. Tri-Cool Coolant coolants suitable coolants suitable
for spray cooling for spray cooling
30632 DL Magnum Dispenser, 1/4 NPT
30633 DL Magnum Dispenser w/ 1 qt. Tri-Cool Coolant, 1/4 NPT
30634 DL Magnum Dispenser, 1/4 BSPT
30635 DL Magnum Dispenser w/ 1 qt. Tri-Cool Coolant, 1/4 BSPT
www.tricocorp.com
800.558.7008
M1
N3
LIL MISTER SYSTEMS
Lil Mister Systems offer spray cooling with features normally

available with higher cost units. The compact size with a 1
quart reservoir makes the Lil Mister ideal for tool room and
other light duty machining applications. Typical applications
include drilling, milling, turning, grinding, and tapping.
FEATURES
Easy reading sight gauge
5 ft. plastic or brass armored line
Easy mounting bracket
Independent air/coolant adjustability
One quart reservoir capacity
6 in. straight brass nozzle standard
Size - 8 1/2 H x 5 1/4 W x 4 D
30541
HELPFUL TIP:
The Lil Mister is designed to be used
SPECIFICATIONS with a water-soluble coolant. See Tri-
Reservoir High Density Polyethylene Cool Fluids on page O2.
Sight Acrylic Plastic
Valves Brass
Seals Buna-N
Delivery Line 5 ft. Brass or Plastic SELECTION CHART
Coolant Tube Polyurethane Model Capacity No of Line Line
No. (qts.) Lines Length (ft.) Material
Filter Element 40 x 40 Mesh Stainless Steel
30540 1 1 5 Plastic
Air Inlet 1/4 NPT
30541 1 1 5 Brass
Air Inlet Pressure 50100 PSI
ACCESSORIES
MAGNETIC NOZZLE HOLDERS NOZZLES

Magnetic nozzle holders facilitate the placement and directing of the nozzle.
Model Capacity No of
Model No. Description No. (qts.) Lines
30460 30 lb. Holder 30490 Straight
30630 60 lb. Holder 30491 45 Angled
6"
30142 165 lb. Holder 30492 90 Angled
30493 Flexible Loc-Line
www.tricocorp.com
800.558.7008
N4
SPRAYMASTER
Spraymaster systems provide convenient spray cooling in

metal cutting. Requiring only compressed air as a power
source, these units are easily installed in many machining
applications.
The Spraymaster is designed for use with Tri-Cool synthetic
coolant. Various mixtures of coolant to water may be used
depending upon individual requirements.
Stainless steel reservoir versions are available with the same
performance features as the standard Spraymaster.
FEATURES
Siphon delivery system 30542 30548
Air and coolant are independently controlled by solid brass
precision needle valves
Brass armored lines are a standard 5 foot length SPECIFICATIONS
6 in. straight brass nozzle is designed so atomization takes Cover High Density Polyethylene
place at nozzle tip for enhanced pattern control Reservoir High Density Polyethylene or
20 Gauge 304 Stainless Steel
Mounting brackets included for easy installation
Valves Brass
1 or 2 outlet line models provide maximum flexibility
O-Rings Buna-N
Liquid level gauge easily indicates coolant level at a glance
Delivery Line Brass Armored
Polyethylene dimensions: 12-1/4H x 10W x 5-1/4 D
Coolant Tube Polyurethane
Stainless steel dimensions: 9-3/8H x 8-3/8W x 5-1/4D
Fittings Brass
Filter Element 40X40 Mesh Stainless Steel
Air Inlet 1/4 NPT
HELPFUL TIP: SELECTION CHART
SprayMaster units are designed to be Model Reservoir Type Capacity No. of Line
No. (gal.) Lines Length (ft.)
used with a water-soluble coolant. See
Tri-Cool Fluids on page O2. 30542 High Density 1
30543 Polyethylene 2
1 5
30548 1
Stainless Steel
30549 2
ACCESSORIES
NOZZLES
Spraymasters are supplied with straight nozzles. MAGNETIC NOZZLE HOLDERS
Other nozzle types are available for customer installation. Magnetic nozzle holders facilitate the placement and directing of the nozzle.
Model No. Length Type Model No. Description

30490 Straight 30460 30 lb. Holder
30491 45 Angled 30630 60 lb. Holder
6"
30492 90 Angled 30142 165 lb. Holder
30493 Flexible Loc-Line
www.tricocorp.com
800.558.7008
M1
N5
SPRAYMASTER II
FEATURES
High performance 7 in. flexible segmented plastic nozzle
Solenoid control for instantaneous response
1 or 2 outlet, 5 ft. brass armored lines
Easy to read coolant sight gauge
Easy to mount reservoir bracket for permanent mounting
to application
Independent air and coolant controls for lean to rich
spray delivery
Size: 12-1/4H x 10W x 5-1/4D
30458 HELPFUL TIP:

SprayMaster II units are designed to be
used with a water-soluble coolant. See
The SprayMaster II is designed for applications where the ability
to cycle the delivery is required. Solenoid control of spray coolant Tri-Cool Fluids on page N2.
allows instant on-off operation for use in fixtured secondary
machining. Solenoid control also conserves on coolant use during
load and unload portion of cycle.
SPECIFICATIONS
This model is available with two lines for maximum coolant Reservoir High Density Polyethylene
delivery or pattern control. The Spraymaster II can be interfaced
with a wide range of signaling devices for automatic delivery Sight Acrylic Plastic
applications. Valves Brass
Seals Buna-N
SELECTION CHART Delivery Line 5 ft. Brass Armored
Comes complete with UL and CSA approved 110 volt, 60 Hz Coolant Tube Polyurethane
power cord. Fused and fully grounded. Filter Element 40 x 40 Mesh Stainless Steel
Model No. Capacity (qts.) No of Lines Line Length (ft.) Solenoid Brass Body & S/S Plunger
30458 1 1 5 Air Inlet 1/4 NPT
30459 1 2 5 Air Inlet Pressure 50100 PSI
ACCESSORIES
MAGNETIC NOZZLE HOLDERS
NOZZLES Magnetic nozzle holders facilitate the placement and
Model No. Length Type directing of the nozzle.
30260 6" Straight Model No. Description

30622 7" 30460 30 lb. Holder
Flexible Plastic
30623 12" 30630 60 lb. Holder
30142 165 lb. Holder
www.tricocorp.com
800.558.7008
N6
MISTMATIC COOLANT DELIVERY SYSTEMS
The Mistmatic allows the user a wide range of coolant

delivery. Variable adjustability allows deliveries such as
lean, rich, high velocity, or low velocity. Unit can fill mini-
flood applications with the dual control valving. This unit
can cover most machining requirements. Multiple metal
removal processes ranging from broaching to grinding can
be covered with the Mistmatic. The pressure pumping
design of the Mistmatic allows use with a wide range of
coolants compatible with Buna-N seals and lower than 1000
SUS viscosity. Auto electric models can be interfaced with
machine controls for cyclic capabilities.
30604
Pump operated system Reservoir High Density Polyethylene
HV-3100 control valve with 7 in. segmented plastic nozzle Sight Acrylic Plastic
One or two outlet, 5 ft. brass armored lines Check Valve Brass w/Buna-N Seals
Independently adjusted air and coolant allows for Seals Buna-N
balancing coolant delivery Delivery Lines 5 ft. Armored Brass
Platform design capabilities allow for flexible line/nozzle Coolant Tube Polyurethane
combinations (consult factory) Valves Brass
Easy reading sight gauge Solenoid Brass Body & S/S Plunger
1 gallon reservoir capacity Nozzle Flexible Segmented Plastic Standard
Reservoir bracket for easy mounting directly to machining Pump Acetal Copolymer w/Buna-N
application
Tubing Polyurethane
1 gallon dimension = 10 1/2 H x 8 1/2 W x 6 D
Air Inlet 1/4 NPT
Air Inlet Pressure 50 -100 PSI
NOZZLES SELECTION CHART

Model No. Length Type Model No. No. of Lines Control Mode Voltage (VAC)
30620 Flexible Plastic 30600 1 Manual
7"
30267 Flexible Metal 30601 2 Manual
30621 Flexible Plastic 30604 1 Auto 120*
12"
30268 Flexible Metal 30605 2 Auto 120*
*Other voltages on request
www.tricocorp.com
800.558.7008
M1
N7
COOLANT DELIVERY SYSTEMS
Both the 30034 and 30095 systems cover coolant delivery applications ranging from
single point applications to multiple point (up to 100) applications. With the use of
a variety of signaling devices, custom machining application cooling and lubricating
can be accomplished. With the nozzle/valve designs available, individual machine
and tool requirements can be serviced from one platform design tank or pump. The
dual control valves allow a delivery range from air only, to mini-flood, and a variety
of spray streams. Applications ranging from broaching to grinding are covered using
these combinations.
FEATURES
30034 Dispenser
Pressure delivery system
5 gallon stainless steel ASME certified tank
Cam action fill cover cannot be opened when unit is pressurized
Large opening for filling
Air regulator, gauge, coolant filter, pressure relief valve and two
way shut off valve included
30095 Pump
Pump operated system
Large capacity delivery capability - up to 100 individual nozzles
Pump works on stall pressure as coolant is delivered saving
compressed air
Pump installs into 2 in. bung in drums or tank allowing quick
changeover of coolant supply
Air only needed for operation
Air regulator, gauge, coolant filter, quick-disconnects and
fittings included
Control Valves
Solid brass valve construction
Precision needle valves allow for infinite pattern delivery 30034
Valve and nozzle design allows for multiple delivery potential 30095
P-12A has built-through feature for simplified installation with
other valves SELECTION CHART
HV-2100 has valve controls close to nozzle delivery point Model No. Description
30034 5 Gallon Dispenser
30095 1:1 Ratio Pump - 2 Bung Fitting
www.tricocorp.com
800.558.7008
N8
COOLANT DELIVERY SYSTEMS
P-12A
30095 P-12A
P-12A
55 gallon drum
HV-2100
SPECIFICATIONS - PUMPS/DISPENSERS
30034 30095
Material Type 304 Stainless Steel Carbon Steel
Capacity 5 gal. Reservoir Size
Seals Buna-N Viton and Teflon
Packing Polyethylene
SELECTION CHART
Fitting Brass CONTROL VALVES
Filter 40 x 40 Mesh Stainless Steel Model No. For Use With Nozzle
Controls 0100 PSI Regulator and Gauge 30240 3" Straight
Size 24 1/2" x 9" 51" x 10" 30241 HV-2100 6" Straight
Connections 1/4 NPT Quick Coupling Inlet 1/4 NPT Quick Coupling Inlet 30256 7" Flexible Plastic
1/4" O.D. Tube Outlet 3/8" Quick Coupling Outlet
Air Pressure 50100 PSI 30112 P-12A 4" Straight
NOZZLES
Model No. For Use With Length (in.) Type
30267 7" Flexible
HV-2100
30268 12 Metal
30112 30241
HOW TO ORDER
Most systems require the following minimum components: dispenser, control valve, fittings, and tubing.
www.tricocorp.com
800.558.7008
O1
INTRODUCTION TO LUBRICANTS & COOLANTS
C utting fluids play a significant role in machining

operations and impact shop productivity, tool life and
quality of work. The primary function of a cutting fluid
is temperature control through cooling and lubrication.
A fluids cooling and lubrication properties are critical in
Water-soluble coolants are cutting fluids engineered to carry
heat away from the tool chip interface. Water is the best
coolant agent, but has no lubricating ability and is susceptible
to contamination. Water-soluble coolants include base oil
along with additives to enhance waters ability to disperse
maximizing productivity and quality, in addition to keeping heat. They are generally used in high-speed cutting operations
expendable tooling costs in line. Cooling and lubrication are such as turning and milling. Lubricants, non-soluble, are
also important in achieving the desired size, finish and shape used in metal cutting operations to reduce friction. They are
of the workpiece. A secondary function of a cutting fluid is used in low-speed cutting operations such as broaching and
to flush away chips and metal fines from the tool/workpiece tapping.
interface. Ultimately, this prevents a finished surface from
becoming marred and reduces the occurrence of a built-up Cutting fluids are widely utilized to optimize the process
edge. of machining operations such as turning, drilling, boring,
grinding, milling, drawing, stamping, and sawing. The
Typically, cutting fluids are manufactured with the following proper selection of a cutting fluid will provide benefits such
bases: mineral, vegetable or synthetic. Additives are added as extended tool life, increased speeds and feeds, tighter
to the base oil to achieve specific performance parameters tolerance capability, and improved finish.
such as corrosion inhibitors, wetting agents, biocides, extreme
pressure additives, and emulsifiers. Cutting fluids fall into two
categories: water-soluble coolant or lubricant, each containing
its own unique properties.
Micro-dispenser being filled with Tri-Cool MD-1 lubricant
www.tricocorp.com
800.558.7008
O2
TRI-COOL FLUIDS
Tri-Cool fluids are specially formulated to provide superior

performance and long service life in various metal cutting Maximize production rates Increase speeds and feeds
operations on ferrous and non-ferrous metals. They have been
designed to meet operator safety concerns. Tri-Cool fluids are Maximize operating costs Increase productivity
safe to use, non-toxic, non-allergenic, and contain no harmful Extend machine and tool life
chemicals or additives.
TC-1 WATER-SOLUBLE COOLANT

TC-1 is a highly concentrated premium synthetic water-soluble
Model No. Size
coolant formulated to exceed the demands of spray and flood
cooling. It contains a non-chlorine extreme pressure additive 30656 4 gallon / case
for improved tool and surface finish. TC-1 prevents rusting on 30657 5 gallon pail
tool and machine surfaces, even at lower concentrations. 30658 55 gallon drum
It contains a broad spectrum biocide/fungicide for protection
against biological growth. TC-1 is non-toxic, non-flammable,
non-corrosive, and biodegradable.
SUGGESTIVE DILUTION RATIOS
Spray Cooling Flood Application
Operation Dilution Ratio Operation Dilution Ratio
Grinding 40:1 Light Machining 32:1
General Machining 32:1 General Machining 20:1
Broach, Tap, Heavy Mach. 20:1 Heavy Machining 10:1
MD-1 MICRO-DROP VEGETABLE LUBRICANT

MD-1 is a pure vegetable based lubricant that can be used in
various metal cutting operations to achieve effective machining Model No. Size
productivity on ferrous and non-ferrous metals. MD-1 has a heat 30648 4 gallon / case
stable, non-chlorine extreme pressure additive for improved 30647 5 gallon pail
tool life and surface finish. MD-1 is low misting, to prevent
fogging in the shop. It will not stain aluminum requiring post- 30646 55 gallon drum
heat treating. MD-1 is environmentally safe and biodegradable.
MD-7 MICRO-DROP SYNTHETIC LUBRICANT

MD-7 is a pure synthetic based lubricant designed for use in
various metal cutting operations. With the use of a Micro- Model No. Size
Dispensing system, more effective machining productivity and 30659 4 gallon / case
savings in fluid costs can be achieved, while waste and disposal 30662 5 gallon pail
problems are reduced. MD-7 is non-toxic, non-flammable, non-
corrosive, and will not become rancid. 30663 55 gallon drum
www.tricocorp.com
800.558.7008
O3
TRI-COOL FLUIDS
APPLICATION GUIDE (Micro-Dispensing lubricants)

All material used for data is 1018 = diameter DOC = depth of cut APPLICATION CHART
Process Parameters MD-1 MD-7 Process TC-1 MD-1 MD-7
Milling Up to 1/16 DOC Light-Duty

(using a 1/2" 2 From 1/16 to 1/4 DOC Machining General
flute HSS EM) From 1/4 to 7/16 DOC Heavy-Duty
Up to 1/4 Ferrous
Tapping From 1/4 to 9/16 Material Non-Ferrous
From 9/16 to 1 Plastics
Up to 1 stock Spray Cooling
Band Sawing From 1 to 3 stock Flooding
Application
From 3 to 4 stock Micro-Dispensing
Manual Application
Water Soluble
Fluid Type Synthetic Based
Vegetable Based
www.tricocorp.com
800.558.7008
P1
DIRECT READING FERROGRAPH
Tricos redesigned DR-7 Ferrograph is even more compact,

portableand easy-to-operate. It quantitatively measures the
concentration of wear particles in oil, while also providing
basic wear trend data to help determine equipment
condition within minutes.
The DR-7 Ferrograph utilizes a better, more efficient
magnetic gradient to trap and optically measure the
amount of ferrous wear particles on a scheduled basis.
The instrument also establishes the baseline wear level for
any piece of equipment. Any sudden increase in the wear
trend level alerts the user to potential problems prompting
preventive actions.
The newly redesigned DR-7 features an interactive 7" LCD
touch screen, USB and Ethernet ports so you can easily plug
in a keyboard, mouse, access useful reports on the web and
connect it to other Ferrography instruments like the new
FM-6 Ferrogram maker and the FS-6 Ferroscope.
FEATURES
PC controlled hardware
4 USB port interface for external devices
No limitations in lubricant type being
monitored
Data can be obtained quickly, generally
under a few minutes
Microprocessor incorporates internal
diagnostics for reliable functioning
7" LCD display with a more modern look
and feel
Internal optics calibration
New design includes a smaller footprint
USB and Ethernet connections
SPECIFICATIONS
Length 12 in.
Width 10.75 in.
Height 21.5 in.
Weight 13 lbs.
Power 100240 V. 50/60 Hz.
Comm-Port RS 4222 or RS 232C selectable
SELECTION CHART
43000 Direct Reading Ferrograph (DR-7)
www.tricocorp.com
800.558.7008
P2
FERROGRAM MAKER
The newly redesigned Ferrogram Maker FM-6 dual slide maker

is used in the first step in Analytical Ferrography. For greater
productivity, the Ferrogram Maker FM-6 is designed with two
independent stations permitting two samples to be prepared
concurrently.
Each station includes a holder which accurately positions a
substrate at a slight incline over a newly designed magnet,
allowing particles to deposit from largest to smallest on a
Ferrogram. This deposition pattern provides good resolution
of large and small particles which facilitates a diagnosis of
potential wear problems.
Ferrogram preparation can be done automatically, semi-
automatically, or manually at the operators option. In the
automatic mode, the sample is deposited on the Ferrogram at
a carefully controlled rate. At the end of the sample deposition
cycle, the wash cycle is automatically initiated, and an audio
and visual signal indicates completion of the Ferrogram. The
semi-automatic and manual modes provide flexibility and
further operator control to perform unusual samples such as
greases and aqueous solutions.
The newly redesigned FM-C features an interactive 7" LCD
touch screen, USB and Ethernet ports so you can easily plug
in a keyboard, mouse, access useful reports on the web and
connect it to our other Ferrography instruments like the new
DR-G Direct Reading Ferrograph and the FS-6 Ferroscope.
FEATURES
Automatic operation releases labor for other tasks
Simultaneously produces two Ferrograms in less than 20
minutes
SPECIFICATIONS
Ferrograms are transparent, allowing differentiation of
Depth 16 in. metallic, organic, and non-metallic particles, for easy
Width 14 in. diagnosis
Height 15 in. Particles are sorted by magnetic susceptibility and size
Weight 27 lbs. enabling quick interpretation
Power 100240 V. 50/60 Hz. Very little particle stacking occurs ensuring observation of
important particles, critical to machine condition
7" LCD display with a more modern look and feel
SELECTION CHART New design includes a smaller footprint
Model No. Description USB and Ethernet connections
43010 Ferrogram Maker (FM-6)
www.tricocorp.com
800.558.7008
P3
FERROSCOPE FS-6
The Ferroscope FS-6 analytical ferrography optical microscope is specially assembled

by Trico with attachments and options that enhance particle identification and
interpretation. The Ferroscope FS-6 comes with three magnification powers -100x,
500x, 1,000x. A technician can scan a Ferrogram quickly at low power looking for
obvious abnormal particles, interpret particle origin and wear mechanism at 500x,
and gain more insight into stress directions at 1,000x.
The Ferroscope FS-6 is equipped with reflective and transmitted
light sources so that a Ferrogram can be illuminated from above
and below. A red light source illuminated above the Ferrogram
causes the light to be reflected off particles and a green light
source below the Ferrogram causes light to be transmitted. Any
metallic particles will reflect light and non-metallic particles will
transmit light.
FEATURES
Field of view is 50% greater than previous ferroscopes,
optics are infinity corrected eliminating focus problems
Light source powers are increased in intensity over
past models allowing better definition and much better
photography (photomicroscopy)
Tri-nocular system allows the addition of cameras,
including video, and digital photography (microscopy)
Bi-chromatic light (two light sources, reflected and
transmitted) for identifying metallic versus non-metallic
debris
Three magnification powers; 100x, 500x, and 1000x enable
rapid scanning to minute detailing
Red and green light filters aid in identification of particle
Polarizer and analyzers help identify particulate and fibrous
contamination
Ergonomic design enables analyst to rest arms on table
while adjusting focus
SPECIFICATIONS
Depth 23.5 in.
Width 12 in.
Height 32 in.
Weight 40 lbs.
Power 100V or 220V AC
www.tricocorp.com
800.558.7008
P4
DIGITAL CAMERA
The high-definition digital camera for the Ferroscope FS-6 features a

5-megapixel CCD that can capture wear particles. The camera improves red
sensitivity by using a new IR cut filter and enhances image quality, including
increased brightness through 4x binning. It features a large built-in LCD
monitor which can observe samples and capture images without a computer
connection. The monitor can be split in half to display still and live images side-
by-side to compare and contrast a sample image that serves as a reference
with a live image. The monitor has exceptional color representation with seven
default gamma correction presets and another seven that can be registered by
the user. It allows the user to create an original reference table.
FEATURES
Data can be saved to: USB memory stick, Compact Flash card,
Mass storage class, Network
All operations can be performed by clicking on-screen menus
A wide variety of tools unique to this camera: Crosshairs,
Measurement, Scale display
Built-in LCD monitorno computer required
Contains two USB ports
Scene mode enabling optimal image capture with a single click
Supports direct printing; just connect the units USB port to a
printer which supports the PictBridge standard
CAMERA SPECIFICATIONS
CCD 2/3 in high density CCD (total number of pixels 5.24 mil)
Recordable Pixels 2560 x 1920 pixels, 1280 x 960 pixels, 640 x 480 pixels
Dimensions 3" W x 3" D x 1.75" H
Weight .5 lbs.
CONTROL UNIT SPECIFICATIONS

Digital Zoom Up to 16x
Storage Format BMP, JPEG (4 step compression), TIFF
Interface USB device port x 1 (mass storage class support)
USB host port x 2 (USB mouse, USB memory stick,
USB keyboard, microscope connection)
Power Supply AC100-240V 50/60 Hz
Dimensions 70VA
Weight 9" W x 2.5" D x 7.875" H
LCD Monitor 8.4" TFT color LCD XGA (1024 x 768) SXGA/XGA
Storage Media Compact flash card (type 1, type II),
USB memory stick, microdrive
Direct Printing PictBridge printer (sold separately)
www.tricocorp.com
800.558.7008
Q1
SERVICES
Lubrication related problems are one of the more common issues

associated with asset management. Whether it is misapplied
lubricants or a lubricant losing its effectiveness, lubrication
problems are a source of machinery downtime and lost
production. Trico can provide strategies on effective lubrication
management through our training seminars, assessments,
audits, consulting, and oil analysis programs. We have evolved
into a global organization that provides innovative lubrication
management services and programs designed to optimize
equipment reliability, reduce unscheduled downtime, minimize
overall maintenance expenditures, and create process and asset
improvements. We provide:
TRAINING
Trico's internationally-recognized courses on Lean Lubrication
Management and Effective Oil Analysis can bring your equipment maintenance best practices up to speed.
Your personnel will gain valuable insight that will make your day-to-day facility operations more efficient.
ASSESSMENTS
The Lubrication Program Assessment is a critical step in improving the overall lubrication program within the
plant. Trico assesses and rates your current program compared to industry best practices. We then provide a
detailed report summarizing opportunities for improvement in key areas versus current efforts and conditions.
This provides plant personnel with a roadmap to address plant status, and provide direction on where to focus
resources to ensure improvements in equipment reliability and reductions in overall maintenance costs.
AUDITS
An Equipment Lubrication Audit is performed to obtain information about the specified equipment including its
internal design, the system design, the present operation and environmental conditions. Trico will gather the
necessary information and outline recommended equipment lubrication requirements.
CONSULTING
Tricos specialists in lubrication and PdM program implementation, documentation integration, and root cause
analysis provide practical solutions in the interest of extending asset reliability and helping your people operate
more proactively.
OIL ANALYSIS
We provide predictive condition monitoring technologies,
including ferrography, used oil analysis, vibration analysis, and
thermography testing.Oil samples are taken and analyzed by our
laboratory as a preventative maintenance tool and/or diagnostic
means to determine cause of lubricant and/or equipment failure.
Oil is tested for a variety of critical factors including water,
particulate, and wear material. Oil analysis can help achieve peak
performance by providing advance warning of abnormal conditions
that could contribute to equipment and oil degradation.
To find out how Trico can improve your lubrication management
program. Contact us at 800.558.7008 or 800.543.8786. You can
also visit our website: www.tricocorp.com.
www.tricocorp.com
800.558.7008
TOTAL LUBRICATION MANAGEMENT SOLUTIONS.
Trico is your complete resource for the lubrication
management products and services you need.
Our vast array of top-grade products apply, condition
and monitor the quality of your lubricantskeeping your
equipmentand your peoplerunning productively.
Trico Corporation | 1235 Hickory Street | Pewaukee, WI 53072 | Phone 262.691.9336 or 800.558.7008

Trico Catalog2014

Uploaded by

Copyright:

Available Formats

Trico Catalog2014

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Trico Catalog2014

Uploaded by

Copyright:

Available Formats

PRODUCT

www.tricocorp. com | 800.558.7008

Constant Level Lubrication . . . . . . . . . . . . . . . . . B1 Grease Lubrication Products. . . . . . . . . . . . . . . . K1

Filtration Systems. . . . . . . . . . . . . . . . . . . . . . . . . G1 Minimum Quantity Lubrication. . . . . . . . . . . . . M1

TOTAL LUBRICATION MANAGEMENT SOLUTIONS

TRICO: TOTAL LUBRICATION MANAGEMENT SOLUTIONS.

INTRODUCTION TO CONSTANT LEVEL LUBRICATION

C onstant level oilers are designed to maintain a predetermined

The majority of constant level oilers available are adjustable,

atmosphere to work properly. Since these oilers are vented to the

Direction of shaft rotation

Closed system oiler mounted on center line

OPTO-MATIC CONSTANT LEVEL OILERS

Opto-Matic Oilers provide an inexpensive method to automatically maintain a constant level of

OPTO-MATIC CONSTANT LEVEL OILERS

Opto-Matic Oilers provide a constant level of oil in a

Model No. Dimensions (in.)

30054 30064 4 oz. 1/4 2-5/16 4-9/16 5-1/16 1/4 3/4

SELECTION CHARTEH, EHB (large surge chamber) EH EHB

SELECTION CHARTLS (large surge chamber)

Breather tubes are accessories used in conjunction

1/8 NPT Thread

OPTO-MATIC CLOSED SYSTEM OILERS

The Opto-Matic Closed System Oiler is designed for

Adjusting Collar Zinc

Model No. Description 0.090" min

30020 16 oz. Guard

OPTO LASER LEVEL

Tricos Opto Laser Level is an innovative tool that

36470 Opto Laser Level with Water Tight Case

INTRODUCTION TO PRESSURE DIFFERENTIAL PRODUCTS

32 110 60 128 17.81 cubic inches

EQUALIZER EXPANSION CHAMBERS

Equalizer Expansion Chambers are designed to prevent pressure increase

HELPFUL TIP: 4-1/16

Prevention of oil contamination and

lubricant cleanliness levels are increased.

* For application assistance on calculating required capacities,

31815 3/8 25 cu. in. 7/8

SELECTION OF AN EXPANSION CHAMBER

DETERMINE TOTAL AIR EXPANSION

3.The temperature range of the bearing housing. High _________F Low

Add (oil expansion) with (air expansion) to get total expansion.

CLOSED SYSTEM HOT SETUP KIT

Pressure differential between the equipment FEATURES

Watchdog Oil Dryer Tube Fitting

3" Hex Nipple

INTRODUCTION TO VISUAL INSPECTION UNITS

Trico sump bottles are used as collection

LIQUID LEVEL GAUGES

Liquid level gauges provide easy viewing in many industrial applications.

CLOSED SYSTEM TOP CAPS

TOP CAP SELECTION CHART

LIQUID LEVEL GAUGES

SELECTION CHARTFEMALE ELBOW

SPECIFICATIONS FEATURES: GLASS

A C 34199 34230 1/2" NPT 7/8 1/2 1-17/32

SELECTION CHART Viewports with Glass Lens and Baffle

SELECTION CHART Viewports with Glass Lens and without Baffle

INTRODUCTION TO OIL SAMPLING / ANALYSIS

* For application assistance on calculating required capacities,