Scribd
Upload
28 views2 pages

PRV: 100 Volts Io: 150 Ma: High Speed Switching Diode

This document provides specifications for a 1N4148S high speed switching diode. The diode has a maximum repetitive peak reverse voltage of 100V, maximum average forward current of 150mA, and maximum forward voltage drop of 1V at 10mA. It features low reverse current, low forward voltage, high speed switching, and is Pb and RoHS free. Mechanical data and thermal characteristics are also provided along with forward and reverse current-voltage curves showing electrical performance.

Uploaded by

MarcelloBorges
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
28 views2 pages

PRV: 100 Volts Io: 150 Ma: High Speed Switching Diode

This document provides specifications for a 1N4148S high speed switching diode. The diode has a maximum repetitive peak reverse voltage of 100V, maximum average forward current of 150mA, and maximum forward voltage drop of 1V at 10mA. It features low reverse current, low forward voltage, high speed switching, and is Pb and RoHS free. Mechanical data and thermal characteristics are also provided along with forward and reverse current-voltage curves showing electrical performance.

Uploaded by

MarcelloBorges
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

1N4148S HIGH SPEED SWITCHING DIODE

DO - 34 Glass
PRV : 100 Volts
Io : 150 mA
FEATURES :
1.00 (25.4)
* Silicon Epitaxial Planar Diode 0.078 (2.0 )max.
min.
* High reliability
* Low reverse current
* Low forward voltage drop 0.118 (3.0)
Cathode
max.
* High speed switching Mark
* Pb / RoHS Free
0.019 (0.50)max. 1.00 (25.4)
min.
MECHANICAL DATA :
Case: DO-34 Glass Case
Weight: approx. 0.093g

Dimensions in inches and ( millimeters )

MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS


Rating at 25 C ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.

RATING SYMBOL VALUE UNIT


Maximum Repetitive Peak Reverse Voltage VRRM 100 V
Maximum Reverse Voltage VR 75 V
Maximum Average Forward Current IF(AV) 150 1) mA
Maximum Surge Forward Current at t < 1s and Tj = 25C IFSM 500 mA
Maximum Power Dissipation , Ta = 25 C PD 500 mW
Maximum Forward Voltage at IF = 10 mA VF 1.0 V
Maximum Reverse Current at VR = 20V 25 nA
at VR = 75V IR 5 A
at VR = 20V, Tj = 150C 50 A
Maximum Voltage Rise when switching ON
test with 50mA Pulses Vfr 2.5 V
tp = 0.1s, Rise Time <30ns fp = 5 to 100kHz
Maximum Reverse Recovery Time
Trr 4 ns
from IF = 10mA to IR = 1mA , VR = 6V , RL = 100
Thermal Resistance Junction to Ambient Air RJA 350 1) K/W
Junction Temperature Range TJ 175 C
Storage Temperature Range TSTG - 65 to + 175 C
Note : 1) Valid provided that leads at a distance of 8 mm from case are kept at ambient temperature (DO-35)

Page 1 of 2 Rev. 02 : March 25, 2005


RATING AND CHARACTERISTIC CURVES ( 1N4148S )

FIG.1 - DERATING CURVE FOR OUTPUT FIG.2 - POWER DARATING CURVE


RECTIFIED CURRENT
AVERAGE FORWARD OUTPUT

250 500

POWER DISSIPATION , mW
200 400
CURRENT, mA

150 300

100 200

50 100

0 0
0 25 50 75 100 125 150 175 0 25 50 75 75 100 125 150 175

AMBIENT TEMPERATURE, ( C) AMBIENT TEMPERATURE, ( C)

FIG.3 - TYPICAL FORWARD CHARACTERISTICS FIG.4 - TYPICAL REVERSE CHARACTERISTICS

100 10
FORWARD CURRENT, mA

Ta = 100 C
REVERSE CURRENT,
MICROAMPERES

1.0

10

0.1
Ta = 25 C
Ta = 25 C

1 0.01
0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 0 20 40 60 80 100 120 140

FORWARD VOLTAGE, VOLTS PERCENT OF RATED REVERSE


VOLTAGE, (%)

Page 2 of 2 Rev. 02 : March 25, 2005

You might also like