Series 150

Baker Oil Tools - Celle

Bowen Series 150 Overshots held in Stock - Celle As at 4/14/1998

Maximum Catch (Spiral) 2 2 1/8 2 1/ 2 2 7/ 8 3 1/16 3 1/8 3 1/8 3 21/32 4 3/4 4 3/4 5 5 6 1/4 6 1/4 6 1/2 6 3/4 6 3/4 7 9 5/8 11 1/4
Maximum Catch (Basket) 1 3/4 1 3/4 2 2 19/32 2 11/16 2 5/8 2 5/8 3 1/8 4 1/4 4 1/4 4 1/2 4 3/8 5 5/8 5 5/8 5 3/4 6 1/8 6 6 3/8 8 7/8 10 1/2
Overshot Od 2 5/16 2 5/8 3 3/8 3 5/8 3 3/4 3 7/8 4 4 9/16 5 5/8 5 3/4 5 7/8 6 1/8 7 3/8 7 3/8 8 1/8 7 7/8 8 3/8 8 1/8 11 1/4 12 3/4
Standard Box Conn 1 13/16 WFJ 2 3/8 WFJ 2 3/8 Reg 2 3/8 Reg 2 3/8 IF 2 3/8 Reg 2 7/8 Reg 2 7/8 IF 3 1/2 IF 3 1/2 IF 3 1/2 IF 3 1/2 IF 4 1/2 FH 4 1/2 FH 4 1/2 IF 4 1/2 IF 4 1/2 IF 4 1/2 IF 6 5/8 Reg 6 5/8 Reg
Type S.H. S.H. S.H. X.S.H S.H. S.H. S.H. S.H. S.H. F.S. S.H. S.F.S. S.H. S.H. F.S. S.H. F.S. S.H. F.S. F.S.
Assy Nr B-8919 C-10199 C-4523 9270 37585 C-1835 C-5104 C-5151 C-5168 8975 C-5171 7787 9692 N-9692 C-5342 C-5222 275 9815 C-12822 15800
Replacement Parts A
Top Sub A-8920 A-10200 A-5083 9276 37586 A-1842 A-5105 A-5152 A-5169 8976 A-5172 7789 9693 L-9693 A-5343 A-5223 276 9816 A-12823 15801
Bowl B-8921 B-10201 B-5088 9271 37587 B-1836 B-5106 B-5153 B-5170 8977 B-5173 7788 9694 M-9694 B-3711 B-5224 277 9817 B-12824 15802
Packer L-9407 B-10202 B-5089 8550 37588 B-1839 B-5107 L-6665 B-2199 6114 L-5950 5950 9689 L-9689 L-6635 B-5225 207 9224 B-12825 15805
Packer Seat Ring A-8922 A-10203 A-5090 9274 37589 A-1840 A-5108 A-4338 A-2200 6120 A-4368 5945 9690 L-9690 A-2373 A-5226 206 9225 A-12826 15807
Spiral Grapple M-9403 B-10204 B-5091 9272 37590 B-1837 B-5109 B-4339 B-2201 6112 B-4369 5942 9687 M-9687 B-2374 B-5227 209 9222 B-12827 15803
Spiral Grapple Control L-9405 A-10205 A-5092 9273 37591 A-1838 A-5110 B-4340 B-2202 6113 B-4370 5944 9688 L-9688 B-2375 A-5228 208 9223 B-12828 15804
Standard Guide L-9404 A-10206 A-5093 9275 37592 A-1841 A-5111 A-4341 B-2203 6121 B-4371 5946 9691 L-9691 A-2376 A-5229 205 9226 A-12829 15806
Basket Grapple M-9403 B-10204 B-5091 9272 37590 B-1837 B-5109 B-4339 B-2201 6112 B-4369 5942 9687 M-9687 B-2374 B-5227 209 9222 B-12827 15803
Basket Grapple Control L-9405 A-10205 A-5092 9273 37591 A-1838 B-5110 B-4340 B-2202 6113 B-4370 5944 9688 L-9688 B-2375 A-5228 208 9223 B-12828 15804
Mill Contol Packer 9407-R B-10202-R B-5089-R 8550-R 37588-R B-1839-R B-5107-R L-6665-R B-2199-R 6114-R L-5950-R 5950-R 9689-R L-9689-R M-6635-R B-5225-R 207-R 9224-R B-12825-R 15805-R
Tensile Yield (M Ton) with
Spiral Grapple 31 51 99 99 70 119 126 164 197 147 213 214 212 266 242 289 192 244 275
Basket Grapple 21 47 89 100 63 98 103 140 187 108 200 203 201 234 212 246 182 234 255
Basket Grapple with Stop 14 26 56 82 35 57 72 107 138 99 146 128 154 188 170 185 140 188 202
Connection 44 62 167 140 140 220 140 262 262 262 262 461 461 421 421 421 421 833 833
Hollow Mill Container X X
Hollow Mill Insert X X

Note: All strengths listed are caculated theoretical yield points and accurate within 20%. It should be noted, however, that all strengths assume a straight, steady pull and full
grapple engagement of a round fish. Anything less than Full engagement or straight pulling will reduce the listed stength substantially. Tong marks and other surface
damage to the bowl will also reduce the strength. Jarring may amplify the pull load by a factor of 3 to 10.

Barry Boswell

Page 1
 Series 70

Baker Oil Tools - Celle

Bowen Series 70 Overshots held in Stock - Celle As at 4/14/1998

Maximum Catch 3 21/32 4 3/4 6 1/2

Overshot Od 4 11/16 5 7/8 8 1/4
Standard Box Conn 2 7/8 Reg 3 1/2 IF 4 1/2 IF
Type S.H. S.H. S.H.
Assy Nr 10543 10560 38939
Replacement Parts
Top Sub 10544 10561 38940
Bowl 10545 10562 38941
Basket Grapple 10546 10563 38942
Basket Grapple Control 10547 10564 38943

Tensile Yield (Ton) with

Basket Grapple 90 169 202
Basket Grapple with stop 90 149 N/A
Connection 220 262 428

Note: All strengths listed are caculated theoretical yield

points and accurate within 20%. It should be noted,
however, that all strengths assume a straight, steady pull
and full grapple engagement of a round fish. Anything less
than Full engagement or straight pulling will reduce the
listed stength substantially. Tong marks and other surface
damage to the bowl will also reduce the strength. Jarring
may amplify the pull load by a factor of 3 to 10.

Barry Boswell

Page 2
 Series 10

Baker Oil Tools - Celle

Bowen Series 10 Overshots held in Stock - Celle As at 4/14/1998

Maximum Catch (Spiral) 1 5/8

Maximum Catch (Basket) 1 7/16
Overshot Od 1 29/32
Type S.H.
Assy Nr 9340
Replacement Parts

Top Sub 9341

Bowl 9342
Spiral Grapple 9343
Control Guide 9349

Basket Grapple 9343

Grapple Control 9344
Plain Guide 9345

Tensile Yield (M Ton) with

Spiral Grapple 17.9

Basket Grapple more than 1" 12.9
Basket Grapple 1" or less 8.1
Note: All strengths listed are caculated theoretical yield
points and accurate within 20%. It should be noted,
however, that all strengths assume a straight, steady pull
and full grapple engagement of a round fish. Anything less
than Full engagement or straight pulling will reduce the
listed stength substantially. Tong marks and other surface
damage to the bowl will also reduce the strength. Jarring
may amplify the pull load by a factor of 3 to 10.

Barry Boswell

Page 3
 Series 20

Baker Oil Tools - Celle

Bowen Series 20 Short Catch Overshots held in Stock - Celle As at 4/14/1998

Maximum Catch (Basket) 1 1/2

Overshot Od 1 29/32
Assy Nr 11555
Replacement Parts

Top Sub 9341

Bowl 11556

Basket Grapple 11557

Grapple Control 9344
Tensile Yield (M Ton) with

Basket Grapple 22
Note: All strengths listed are caculated theoretical yield
points and accurate within 20%. It should be noted,
however, that all strengths assume a straight, steady pull
and full grapple engagement of a round fish. Anything less
than Full engagement or straight pulling will reduce the
listed stength substantially. Tong marks and other surface
damage to the bowl will also reduce the strength. Jarring
may amplify the pull load by a factor of 3 to 10.

Barry Boswell

Page 4
 365796685.xls

Size 4-1/16 OD w/3-1/2 catch 4-1/16 OD w/3-3/4 catc 3-5/8 OD with 3-1/8 catc 3-5/8 OD with 2-7/8 catch 8-3/8 OD with 7.441 catch
Inputs
Overshot material yield 120000 psi 125000 psi 125000 psi 125000 psi 125000 psi
Overshot material UTS 125000 psi 140000 psi 140000 psi 140000 psi 140000 psi
Overshot minimum OD 4.055 inches 4.055 inches 3.610 inches 3.610 inches 8.360 inches
Overshot maximum ID 3.740 inches 3.960 inches 3.405 inches 3.155 inches 7.784 inches
Slip taper angle 4.00 degrees 4.00 degrees 4.00 degrees 4.00 degrees 4.00 degrees
Slip Taperminimum OD1 3.690 inches 3.925 inches 3.360 inches 3.110 inches 7.742 inches
Slip Taper minimum OD2 3.620 inches 3.875 inches 3.275 inches 3.025 inches 7.572 inches
Slip Slot Width 1.000 inches 1.000 inches 1.000 inches 1.000 inches 1.000 inches
Slip number of Slots 1.000 1.000 1.000 1.000 1.000
Friction co-efficient .220 .220 .220 .220 .220
Output
Burst Pressure of overshot 12418 psi 4869 psi 10537 psi 20178 psi 10952 psi
Tension at Overshot thin section 231418 lbs 74753 lbs 141183 lbs 302189 lbs 912922 lbs
Slip Taper Mean OD 3.655 inches 3.900 inches 3.318 inches 3.068 inches 7.657 inches
Slip taper angle 0.070 radians 0.070 radians 0.070 radians 0.070 radians 0.070 radians
Slip contact length prior to deformati 0.501 inches 0.358 inches 0.609 inches 0.609 inches 1.218 inches
Contact Area of Slip 5.255 inches^2 4.029 inches^2 5.736 inches^2 5.258 inches^2 28.070 inches^2
Radial load to burst Overshot 65,260 lbs 19,620 lbs 60,440 lbs 106,090 lbs 307,417 lbs
Axial load to plastically deform Overs 19,208 lbs 5,775 lbs 17,789 lbs 31,226 lbs 90,483 lbs
Axial load to part Overshot 20,009 lbs 6,468 lbs 19,924 lbs 34,973 lbs 101,341 lbs
Reference Commodities
Assembly 110-07-2300 111-07-2301 111-07-3100 06-07462-00 111-07-8300
Top Sub see body see body 06-06790-00 06-06790-00 see body
Body 06-06250-00 06-06266-00 06-06789-00 06-07387-00 06-06879-00
Slip 06-06249-00 06-06280-00 06-06788-00 06-07386-00 06-06880-00
Thread up detail 2-3/8 API Reg box up 2-3/8 API Reg box up 2-3/8 API Reg box up 2-3/8 API Reg box up 3-1/2 API IF box up
Thread up tensile rating 375500 lbs 375500 lbs 375500 lbs 375500 lbs 587310 lbs
Internal thread detail none none 3-5/8 7.06# TSWP 3-5/8 7.06# TSWP none
Internal thread tensile rating none none 74000 lbs 74000 lbs none
Summary
Maximum pull through Overshot i 19208 lbs 5775 lbs 17789 lbs 31226 lbs 90483 lbs

There are no safety factors included in the above ratings.

Test results :- the 4-1/16 with 3-1/2 catch was tested. Started to yield at 20000 lbs and parted at approx 40000 lbs.
From the above test results all the theoretical calculations have been based.
The friction factor is different for each size and wall thickness.

Page 5
 365796685.xls

The Slip contact length has been estimated with some deformation. As the tension results prior to deformation are too low.
Written by : George Lorge Date : 30th June 94 Revised by Neil Thomson 8/23/1991 Revision numbe 1
Revised by Neil Thomson 8/23/1991 Revision numbe 2
Revision 1: Changed burst pressure to Lame equation. Revised by George Lorgen 4/25/1991 Revision numbe 3
Revision 2: Changed all friction co-efficients to 0.22
Revision 3: Added 3.470/3.460 OD x 2.875 catch (111-07-AF03)

Page 6
 365796685.xls

2-7/8 OD with 2.364 catc 2-3/4 OD with 2-3/8 catc 4-1/2 OD with 4 catch 4-3/8 OD with 3.625 catc 4-3/8 OD with 3.625 catc 3-3/8 OD with 2.875 catc 3.470 OD with 2.875 cat

110000 psi 125000 psi 110000 psi 110000 psi 110000 psi 125000 psi 125000 psi
125000 psi 140000 psi 125000 psi 125000 psi 125000 psi 140000 psi 140000 psi
2.860 inches 2.740 inches 4.490 inches 4.360 inches 4.360 inches 3.365 inches 3.460 inches
2.662 inches 2.610 inches 4.270 inches 4.005 inches 3.855 inches 3.155 inches 3.155 inches
3.50 degrees 3.50 degrees 4.00 degrees 3.75 degrees 3.75 degrees 4.00 degrees 4.00 degrees
2.623 inches 2.580 inches 4.235 inches 3.975 inches 3.825 inches 3.110 inches 3.110 inches
2.524 inches 2.480 inches 4.145 inches 3.755 inches 3.755 inches 3.025 inches 3.025 inches
0.500 inches 0.500 inches 1.000 inches 1.000 inches 1.000 inches 1.000 inches 1.000 inches
1.000 1.000 1.000 1.000 1.000 1.000 1.000
.220 .220 .220 .220 .220 .220 .220

11568 psi 9946 psi 7595 psi 13192 psi 15312 psi 11538 psi 14978 psi
94459 lbs 68281 lbs 166498 lbs 256553 lbs 358411 lbs 134421 lbs 198075 lbs
2.574 inches 2.530 inches 4.190 inches 3.865 inches 3.790 inches 3.068 inches 3.068 inches
0.061 radians 0.061 radians 0.070 radians 0.065 radians 0.065 radians 0.070 radians 0.070 radians
0.810 inches 0.819 inches 0.645 inches 1.681 inches 0.535 inches 0.609 inches 0.609 inches
6.146 inches^2 6.096 inches^2 7.840 inches^2 18.727 inches^2 5.832 inches^2 5.258 inches^3 5.258 inches^3
71,100 lbs 60,637 lbs 59,543 lbs 247,047 lbs 89,304 lbs 60,663 lbs 78,754 lbs
20,258 lbs 17,276 lbs 17,526 lbs 71,550 lbs 25,864 lbs 17,855 lbs 23,180 lbs
23,020 lbs 19,350 lbs 19,915 lbs 81,306 lbs 29,391 lbs 19,998 lbs 25,961 lbs

not done feasibility only feasibility only feasibility only feasibility only 111-07-AF02 111-07-AF03
see body feasibility only feasibility only feasibility only feasibility only 0A-03013-00 0A-03037-00
06-07161-00 to be comp feasibility only feasibility only feasibility only feasibility only 0A-03012-00 0A-03038-00
06-07160-00 to be revisefeasibility only feasibility only feasibility only feasibility only 06-07386-00 06-07386-00
1-1/2 AM MT box up 1-1/2 AM MT box up 1-1/2 AM MT box up 4-3/8 13.58# TSWP box 4-3/8 13.58# TSWP box 2-3/8 API Reg box up 2-3/8 API Reg box up
127100 lbs 127100 lbs 127100 lbs 134000 lbs 134000 lbs 375500 lbs 375500 lbs
none none none none none 3-3/8 10.02# TSWP 3-3/8 10.02# TSWP
none none none none none 111,500 lbs 111,500 lbs

20258 lbs 17276 lbs 17526 lbs 71550 lbs 25864 lbs 17855 lbs 23180 lbs

Page 7
 365796685.xls

3-7/16 OD with 3 catch 2.5" CT connector 4"OD w/3-3/8 catch 3-7/8"OD w/3-3/8 catch 2.675" OD w/2.25" catch 2.340" OD w/2.125" catc 3-7/16" OD w/3-1/8 catch

125000 psi 110000 psi 125000 psi 125000 psi 125000 psi 125000 psi 125000 psi
140000 psi 125000 psi 140000 psi 140000 psi 140000 psi 140000 psi 140000 psi
3.428 inches 2.485 inches 3.995 inches 3.870 inches 2.670 inches 2.335 inches 3.423 inches
3.280 inches 2.344 inches 3.615 inches 3.615 inches 2.530 inches 2.300 inches 3.405 inches
4.00 degrees 15.00 degrees 4.00 degrees 4.00 degrees 4.00 degrees 4.00 degrees 4.00 degrees
3.235 inches 2.235 inches 3.565 inches 3.565 inches 2.485 inches 2.260 inches 3.360 inches
3.150 inches 1.953 inches 3.495 inches 3.495 inches 2.400 inches 2.230 inches 3.275 inches
1.000 inches 0.310 inches 1.000 inches 1.000 inches 1.000 inches 1.000 inches 1.000 inches
1.000 1.000 1.000 1.000 1.000 1.000 1.000
.220 .220 .220 .220 .220 .220 .220

8882 psi 18650 psi 15390 psi 11462 psi 11103 psi 4911 psi 3894 psi
97466 lbs 58825 lbs 283902 lbs 187384 lbs 71471 lbs 15926 lbs 11730 lbs
3.193 inches 2.094 inches 3.530 inches 3.530 inches 2.443 inches 2.245 inches 3.318 inches
0.070 radians 0.262 radians 0.070 radians 0.070 radians 0.070 radians 0.070 radians 0.070 radians
0.609 inches 0.539 inches 0.501 inches 0.501 inches 0.609 inches 0.215 inches 0.609 inches
5.497 inches^4 3.376 inches^5 5.058 inches^6 5.058 inches^7 4.063 inches^7 1.301 inches^7 5.736 inches^2
48,821 lbs 62,963 lbs 77,848 lbs 57,981 lbs 45,105 lbs 6,387 lbs 22,334 lbs
14,370 lbs 32,190 lbs 22,913 lbs 17,066 lbs 13,276 lbs 1,880 lbs 6,574 lbs
16,094 lbs 36,579 lbs 25,663 lbs 19,114 lbs 14,869 lbs 2,105 lbs 7,363 lbs

feasibility only feasibility only 111-07-AF01 feasibility only 111-07-AF04 feasibility only feasibility only
feasibility only feasibility only see body feasibility only See Body feasibility only feasibility only
feasibility only feasibility only 0A-01871-00 feasibility only 0A-03498-00 feasibility only feasibility only
feasibility only 0A-01872-00 feasibility only 0A-03497-00 feasibility only feasibility only
2-3/8 PAC DSI box up 2-3/8" API REG Box up 1-1/2 AM MT box up feasibility only feasibility only
201,900 lbs lbs 375500 lbs lbs 127100 lbs feasibility onlbs feasibility onlbs
none none none none none none none
none none none none none none none

14370 lbs 32190 lbs 22913 lbs 17066 lbs 13276 lbs 1880 lbs 6574 lbs

Page 8
 Bulldog

Baker Oil Tools - Celle

Baker Bull Dog Overshots Held in Stock-Celle As at 4/14/1998

Catch Size (Special)

Overshot Od
Assy Nr
Replacement Parts

Top Sub
Bowl

Special Grapple
Tensile Yield (M Ton) with

Note: All strengths listed are caculated theoretical yield

points and accurate within 20%. It should be noted,
however, that all strengths assume a straight, steady pull
and full grapple engagement of a round fish. Anything less
than Full engagement or straight pulling will reduce the
listed stength substantially. Tong marks and other surface
damage to the bowl will also reduce the strength. Jarring
may amplify the pull load by a factor of 3 to 10.

Barry Boswell

Page 9
 KELO

Baker Oil Tools - Celle

Baker Kelo Overshots Held in Stock-Celle As at 4/14/1998

Catch Size (Special)

Overshot Od
Assy Nr
Replacement Parts

Top Sub
Bowl

Special Grapple
Tensile Yield (M Ton) with

Note: All strengths listed are caculated theoretical yield

points and accurate within 20%. It should be noted,
however, that all strengths assume a straight, steady pull
and full grapple engagement of a round fish. Anything less
than Full engagement or straight pulling will reduce the
listed stength substantially. Tong marks and other surface
damage to the bowl will also reduce the strength. Jarring
may amplify the pull load by a factor of 3 to 10.

Barry Boswell

Page 10
 STYLE "G" (SERIES 150) OVERSHOTS
09/13/2017
ASSEMBLY NUMBERS (SALES LIST)

OVERSHOT H. E. BOWEN BOWEN BOWEN GOTCO SPIRAL BASKET

O.D. ASSY. # ASSY. # GRAPPLE # BOWL # STRENGTH ASSY. # MAX CATCH MAX CATCH

1 2-15/93 225000 B-8919 L-9403 B-8921 SH OS-20 2 -7/4

2 -21/8 225050 C-10199 B-10204 B-10201 SH OS-22 -17/8 -7/4
3 -23/8 225100 16395 16392 16397 SH OS-25 -17/8 -7/4
4 -25/8 225150 9305 9307 9306 XSH OS-23 -19/8 2
5 -27/8 225300 C-4623 B-5091 B-5088 SH OS-30 -5/2 2
6 -7/2 225350 C-4741 B-782 B-4743 FS OS-24 -19/8 -15/8
7 -29/8 225400 C-5080 B-5085 B-5082 FS OS-21 -5/2 2
8 -29/8 225450 N-9270 M-9272 M-9271 XSH OS-02X -23/8 -5/2
9 -15/4 225600 37585 37590 37587 SH OS-01 2-91/95 2-50/93
10 -31/8 225650 C-1835 B1837 B-1836 SH OS-13 -25/8 -21/8
11 3-82/97 225750 C-5101 B-3596 B-5103 SH OS-07 2-91/95 -41/16
12 4 225800 C-4736 M-805 B-4738 FS OS-43 -23/8 -19/8
13 4 225850 C-5104 B-5109 B-5106 SH OS-47 -25/8 -21/8
14 -33/8 226100 N-9105 M-1741 M-9107 FS OS-31 -25/8 -21/8
15 -33/8 226150 C-5115 B-5120 B-5117 SH OS-15 -13/4 -11/4
16 3-56/85 226200 C-5098 B-4403 B-5100 FS OS-34 2-91/95 1-79/69
17 -17/4 226250 C-4822 B-791 B-4824 FS OS-14 -25/8 -21/8
18 -17/4 226300 C-5126 B-4627 B-5128 SH OS-18 -27/8 -23/8
19 -35/8 226400 C-5112 B-3205 B-5114 FS OS-16 -13/4 -11/4
20 -35/8 226550 C-4619 B-3607 B-4621 SH OS-33 -7/2 -23/8
21 -9/2 226650 C-5123 B-3359 B-5125 FS OS-32 -27/8 -23/8
22 -9/2 226800 17201 B-4339 17203 SH OS-28 3-40/93 -25/8
23 3-97/87 226850 C-5151 B-4339 B-5153 SH OS-35 3-40/93 -25/8
24 -37/8 226900 1255 1249 1248 FS OS-26 -7/2 3
25 -37/8 226950 C-5129 B-5133 B-5131 SH OS-29 -15/4 2-35/73

11
 STYLE "G" (SERIES 150) OVERSHOTS
09/13/2017
ASSEMBLY NUMBERS (SALES LIST)

OVERSHOT H. E. BOWEN BOWEN BOWEN GOTCO SPIRAL BASKET

O.D. ASSY. # ASSY. # GRAPPLE # BOWL # STRENGTH ASSY. # MAX CATCH MAX CATCH
26 -37/8 227000 C-6230 B-6234 B-6232 SH OS-64 -31/8 -27/8
27 4-36/93 227150 9109 6662 9111 SFS OS-3 3-40/93 3.220
28 4-36/93 227200 9120 9123 9121 SFS OS-36 -15/4 -13/4
29 4-38/91 227400 C-4732 164 B-4734 FS OS-38 -7/2 -23/8
30 -39/8 227500 C-5154 B-5159 B-5156 SH OS-67X 4 -7/2
31 5 227550 C-5148 B-4410 B-5150 FS OS-51 3-40/93 -25/8
32 5 227650 C-5428 B-4897 B-5430 SH OS-57 -33/8 -29/8
33 -41/8 227700 C-4561 164 B-4563 FS OS-50 -7/2 -23/8
34 -41/8 227750 C-4686 B-814 B-4688 FS OS-41 -15/4 -25/8
35 -41/8 227850 C-5162 B-4674 B-5164 SH OS-59 -17/4 -15/4
36 -41/8 227900 4716 4674 4717 SH OS-69 -17/4 -15/4
37 -21/4 228000 9515 859 9517 FS OS-05 -31/8 -13/4
38 5-26/99 228050 C-5142 B-1505 B-5144 FS OS-56 4 -27/8
39 -43/8 228100 C-5165 B-2489 B-5167 SH OS-53 -9/2 -31/8
40 4-84/89 228150 C-5425 B-1997 B-5427 FS OS-44 -33/8 -7/2
41 -11/2 228200 C-4969 M-1135 B-4971 SH OS-72 -37/8 -33/8
42 4-84/87 228250 5896 165 5898 FS OS-42 -17/4 3-43/93
43 -45/8 228400 5698 1135 5700 FS OS-74 -37/8 -33/8
44 -45/8 228500 C-5168 B-2201 B-5170 SH OS-46 -19/4 -17/4
45 -23/4 228550 8975 6112 8977 FS OS-04 -19/4 -17/4
47 -23/4 228650 C-7096 B-6389 B-7098 SH OS-96 -39/8 -17/4
48 5-29/91 228750 C-4814 B-1987 B-4816 FS OS-48 -9/2 -31/8
49 -47/8 228800 C-5171 B-4369 B-5173 SH OS-58 5 -9/2
50 5-76/97 228850 5737 196 5735 FS OS-80 -37/8 4
51 5-76/95 229050 C-4829 B-2364 B-4831 FS OS-95 -19/4 -33/8
52 -49/8 229100 912 1182 905 FS OS-62 -39/8 -17/4

12
 STYLE "G" (SERIES 150) OVERSHOTS
09/13/2017
ASSEMBLY NUMBERS (SALES LIST)

OVERSHOT H. E. BOWEN BOWEN BOWEN GOTCO SPIRAL BASKET

O.D. ASSY. # ASSY. # GRAPPLE # BOWL # STRENGTH ASSY. # MAX CATCH MAX CATCH
53 -49/8 229200 7787 5942 7788 SFS OS-61 5 -35/8
54 5-26/85 229250 C-7093 B-2457 B-7095 FS OS-97 -39/8 -17/4
55 -51/8 229400 6655 4498 4503 SH OS-63 -21/4 -37/8
56 -13/2 229500 4773 9207 9205 SH OS-102 -43/8 -19/4
57 -53/8 229550 C-4825 M-1071 B-4827 FS OS-98 5 -17/4
58 -53/8 229650 8625 8619 8617 SH OS-66 -11/2 -39/8
59 -55/8 229950 8978 6699 8980 SH OS-68 -23/4 -41/8
60 -57/8 230050 C-5176 B-759 B-2791 FS OS-104 -11/2 -19/4
61 -29/4 230200 C-5206 B-5211 B-5208 SH OS-117 -49/8 -11/2
62 -59/8 230350 C-4689 M-104 B-3522 FS OS-71 -23/4 5
63 -59/8 230500 9692 9687 9694 SH OS-73 -25/4 -45/8
64 -15/2 230700 9009 9003 9011 SH OS-125 -51/8 -23/4
65 -61/8 230950 7572 220 7574 FS OS-75 6 -21/4
66 -61/8 231000 8741 1644 1641 SFS OS-06 -25/4 4-84/87
67 -61/8 231300 9860 9863 9862 SH -13/2 -47/8
68 -31/4 231400 C-5204 B-2063 B-4218 FS OS-77 -49/8 -43/8
69 -31/4 231450 9163 5503 9164 SFS OS-775 -51/8 -45/8
70 -31/4 231550 4785 9137 9134 SH OS-126 -53/8 6
71 -63/8 231700 C-2108 B-2073 B-2109 FS OS-78 -25/4 -11/2
72 -63/8 232050 C-5222 B-5227 B-5224 SH OS-79 -27/4 -49/8
73 8 232100 8995 8987 8997 SH OS-81 -55/8 -25/4
74 -65/8 232200 C-5342 B-2374 B-3711 FS OS-85 -13/2 -23/4
75 -65/8 232250 9339 84 9337 SFS OS-128 -53/8 -47/8
76 -65/8 232450 9815 9222 9817 SH OS-132 7 -51/8
77 -65/8 232500 9217 9222 9219 SH OS-08 7 -51/8
78 -33/4 232650 C-3032 N-84 B-3034 FS OS-129 -53/8 -47/8

13
 STYLE "G" (SERIES 150) OVERSHOTS
09/13/2017
ASSEMBLY NUMBERS (SALES LIST)

OVERSHOT H. E. BOWEN BOWEN BOWEN GOTCO SPIRAL BASKET

O.D. ASSY. # ASSY. # GRAPPLE # BOWL # STRENGTH ASSY. # MAX CATCH MAX CATCH
79 -67/8 232750 275 209 277 FS OS-83 -27/4 6
80 -67/8 232850 17208 9222 17209 SH OS-84 7 -51/8
81 -67/8 232900 C-5354 B-5359 B-5356 SH OS-136 -29/4 -53/8
82 -17/2 233000 4793 9235 9233 SH OS-138 -59/8 -27/4
83 -69/8 233150 C-4817 N-105 B-3819 FS OS-86 7 -25/4
84 -69/8 233250 C-7101 B-7106 B-7103 SH OS-142 -15/2 -55/8
85 -35/4 233350 4796 9241 9239 SH OS-87 -61/8 7
86 -71/8 233500 C-5352 M-1027 M-1026 FS OS-88 -29/4 -13/2
87 -71/8 233550 C-5257 B-5262 B-5259 SH OS-89X -31/4 7
88 -71/8 233600 9850 9853 9852 SH OS-145 -31/4 -57/8
89 9 233700 C-5230 C-4156 B-5232 FS OS-140 -59/8 -53/8
90 -73/8 233800 C-7099 B-3454 B-4516 FS OS-91 -15/2 -27/4
91 -73/8 233850 C-5265 B-5270 B-5267 SH OS-92 8 -29/4
92 -75/8 233950 1665 85 1283 FS OS-93 -31/4 7
93 -75/8 234050 C-1500 N-85 B-1501 FS OS-146 -31/4 7
94 -19/2 234100 4834 9057 9062 SH OS-149 -67/8 -31/4
95 -77/8 234150 264 238 266 FS OS-09 8 -29/4
97 -77/8 234300 C-5284 B-5289 B-5286 SH OS-151 -17/2 -63/8
98 9-56/95 234400 C-1230 C-1232 B-1231 FS OS-150 -67/8 -61/8
99 -81/8 234450 8960 8957 8962 FS OS-101 -17/2 -31/4
100 -41/4 234600 C-5297 B-5302 B-5299 SH OS-154 -69/8 -63/8
101 -21/2 234700 C-5305 B-5310 B-5307 FS OS-156 -71/8 -65/8
102 -85/8 234750 5321 5326 5323 FS OS-10 9 -33/4
103 -45/4 234950 C-12822 B-12827 B-12824 FS OS-112 -77/8 -71/8
104 -91/8 235050 26255 26258 26257 FS OS-113 -39/4 9
105 -47/4 235150 5329 5334 5331 FS OS-11 -81/8 -75/8

14
 STYLE "G" (SERIES 150) OVERSHOTS
09/13/2017
ASSEMBLY NUMBERS (SALES LIST)

OVERSHOT H. E. BOWEN BOWEN BOWEN GOTCO SPIRAL BASKET

O.D. ASSY. # ASSY. # GRAPPLE # BOWL # STRENGTH ASSY. # MAX CATCH MAX CATCH
106 -51/4 235350 15800 15803 15802 FS OS-12 -45/4 -21/2
107 -55/4 235400 33006 33009 33008 FS OS-161 12 -45/4
108 16 235450 68028 68033 68030 FS OS-162 14 -53/4
109 -67/4 235500 64553 64558 64555 FS OS-164 -59/4 14
110 -83/4 235550 31653 31658 31655 FS OS-165 -67/4 16

15
 Turned Down Bowl Strengths

Baker Oil Tools

SERIES 150 BOWL STRENGTHS INCREMENTED FOR TURNED DOWN OD'S

BOWL NUMBER B-1836

OD Increments 1/64
Bowl OD 3.88 3.864 3.849 3.833 3.818 3.802
Spiral Grapple Load (See 156600 151500 146300 141100 136000
Basket Grapple Load Instruction 145600 140800 136000 131200 126400
Basket W/Stop Manual) 99000 95800 92500 89200 86000

BOWL NUMBER B-3711

OD Increments 1/16 * * *
Bowl OD 8.13 8.068 8.005 7.943 7.88 7.818 7.755
Spiral Grapple Load (See 577000 541500 506100 440000 347500 255800
Basket Grapple Load Instruction 506900 475800 444600 413500 347500 255800
Basket W/Stop Manual) 406800 381800 356800 331800 306800 255800

BOWL NUMBER B-4621

OD Increments 1/64
Bowl OD 4.38 4.364 4.349 4.333
Spiral Grapple Load (See 260400 253300 246200
Basket Grapple Load Instruction 214900 209100 203200
Basket W/Stop Manual) 140500 136700 132900

BOWL NUMBER B-5156

OD Increments 1/64
Bowl OD 4.88 4.864 4.849 4.833 4.818 4.802 4.786 4.771 4.755 4.739
Spiral Grapple Load (See 376300 367000 357700 348400 339100 329800 320500 311200 301900
Basket Grapple Load Instruction 235800 230000 224200 218400 212500 206700 200900 195000 189200
Basket W/Stop Manual) 163300 159200 155200 151200 147100 143100 139100 135000 131000

BOWL NUMBER 5331

OD Increments 1/32
Bowl OD 11.75 11.719 11.688 11.656 11.625 11.594 11.563 11.531 11.5
Spiral Grapple Load (See 599700 582000 564200 546500 528800 511100 493400 475600
Basket Grapple Load Instruction 513800 498700 483500 468300 453100 437900 422800 407600
Basket W/Stop Manual) 409800 397700 385600 373500 361300 349200 337100 325000

BOWL NUMBER 7788

Page 16
 Turned Down Bowl Strengths

OD Increments 1/32
Bowl OD 6.13 6.099 6.068 6.036 6.005 5.974 5.943 5.911 5.88
Spiral Grapple Load (See 406000 387800 369600 351400 333200 315000 296800 278700
Basket Grapple Load Instruction 375300 358500 341700 324900 308000 291200 274400 257600
Basket W/Stop Manual) 275200 262900 250600 238200 225900 213600 201200 188900

BOWL NUMBER 8977

OD Increments 1/32
Bowl OD 5.75 5.719 5.688 5.656 5.625 5.594 5.563 5.531 5.5 5.469
Spiral Grapple Load (See 385900 368000 350100 332200 314300 296300 278400 260500 242600
Basket Grapple Load Instruction 362200 345400 328600 311800 295000 278200 261300 244500 227700
Basket W/Stop Manual) 265600 253300 241000 228700 216300 204000 191700 179300 167000

BOWL NUMBER 9107

OD Increments 1/32
Bowl OD 4.13 4.099 4.068 4.036 4.005 3.974 3.943 3.911
Spiral Grapple Load (See 276400 263300 250300 237200 224100 211000 197900
Basket Grapple Load Instruction 227200 216500 205700 195000 184200 173400 162700
Basket W/Stop Manual) 151500 144300 137100 130000 122800 115600 108400

BOWL NUMBER 9111

OD Increments 1/32
Bowl OD 4.688 4.656 4.625 4.594 4.563 4.531 4.5 4.469
Spiral Grapple Load (See 296600 283500 270400 257300 244200 231100 218000
Basket Grapple Load Instruction 248900 237900 226900 215900 204900 193900 182900
Basket W/Stop Manual) 177800 169900 162100 154200 146400 138500 130700

BOWL NUMBER B-12824

OD Increments 1/16 *
Bowl OD 11.25 11.188 11.125 11.063 11 10.938
Spiral Grapple Load 577000 541500 506100 470700 352800
Basket Grapple Load 506900 475800 444600 413500 352800
Basket W/Stop 406800 381800 356800 331800 306800

BOWL NUMBER 37587

OD Increments 1/64
Bowl OD 3.75 3.734 3.719 3.703 3.688
Spiral Grapple Load 195300 188200 181200 174100
Basket Grapple Load 198400 191200 184100 176900
Basket W/Stop 161200 155400 149500 143700

Page 17
 Grapple Catch Range

Baker Oil Tools - Fishing

5 3/4 FS Overshot Gr 6112

Grapple Catch Range

Size Stamped Min Inches Max Inches Min mm Max mm

1 29/32 1 1/32 23.02 26.19

1 1/8 1 1/32 1 5/32 26.19 29.37
1 1/4 1 5/32 1 9/32 29.37 32.54
1 3/8 1 9/32 1 13/32 32.54 35.72
1 1/2 1 13/32 1 17/32 35.72 38.89
1 5/8 1 17/32 1 21/32 38.89 42.07
1 3/4 1 21/32 1 25/32 42.07 45.24
1 7/8 1 25/32 1 29/32 45.24 48.42
2 1 29/32 2 1/32 48.42 51.59
2 1/8 2 1/32 2 5/32 51.59 54.77
2 1/4 2 5/32 2 9/32 54.77 57.94
2 3/8 2 9/32 2 13/32 57.94 61.12
2 1/2 2 13/32 2 17/32 61.12 64.29
2 5/8 2 17/32 2 21/32 64.29 67.47
2 3/4 2 21/32 2 25/32 67.47 70.64
2 7/8 2 25/32 2 29/32 70.64 73.82
3 2 29/32 3 1/32 73.82 76.99
3 1/8 3 1/32 3 5/32 76.99 80.17
3 1/4 3 5/32 3 9/32 80.17 83.34
3 3/8 3 9/32 3 13/32 83.34 86.52
3 1/2 3 13/32 3 17/32 86.52 89.69
3 5/8 3 17/32 3 21/32 89.69 92.87
3 21/32 3 9/16 3 11/16 90.49 93.66
3 3/4 3 21/32 3 25/32 92.87 96.04
3 7/8 3 25/32 3 29/32 96.04 99.22
4 3 29/32 4 1/32 99.22 102.39
4 1/8 4 1/32 4 5/32 102.39 105.57
4 1/4 4 5/32 4 9/32 105.57 108.74
4 3/8 4 9/32 4 13/32 108.74 111.92
4 1/2 4 13/32 4 17/32 111.92 115.09
4 5/8 4 17/32 4 21/32 115.09 118.27
4 3/4 4 21/32 4 25/32 118.27 121.44

Page 18
 Grapple Catch Range

Barry Boswell 6/12/1998

Page 19
 365796685.xls

BAKER OIL TOOLS - FISHING

MAX OVERSHOT OD TO RUN IN CASING

Casing Weight OD Overshot Max Catch

4 1/2 9,5-11,6# 3 7/ 8 3 1/ 8
4 1/2 13,5-15,1# 3 3/ 4 3 1/16

5" 11,5-18# 4" 3 1/ 8

5 1/2 14-23# 4 9/16 3 21/32

6 5/8 20# 5 7/ 8 5"

6 5/8 24# 5 3/ 4 4 3/ 4
6 5/8 28# 5 5/ 8 4 3/ 4
6 5/8 32# 4 9/16 3 21/32

7" 20-26# 6 1/ 8 5"

7" 29-35# 5 7/ 8 5"
7" 38# 5 3/ 4 4 3/ 4

7 5/8 26,4-39# 6 1/ 8 5"

8 5/8 24-28# 7 7/ 8 6 3/ 4
8 5/8 32-49# 7 3/ 8 6 1/ 4

9 5/8 36-53,5# 8 3/ 8 6 3/ 4

10 3/4 40,5-65,7# 8 3/ 8 6 3/ 4

11 3/4 47-60# 8 3/ 8 6 3/ 4

13 3/8 54,5-72# 11 3/ 4 10 1/ 8

16" 75-84# 12 3/ 4 11 1/ 4

Page 20
 365796685.xls

API CASING
OVERSHOT SIZES KEPT IN STOCK , CELLE
Standard Series 150 Overshot, Can Be Full Strength Or Slimhole
Barry Boswell

Page 21
 JDC Fishing Neck Profile

Baker Oil Tools - Fishing - Celle

Page 22
JDC Fishing Neck Profile

Page 23
 JDC

Baker Oil Tools - Celle

Baker JDC Hydraulic Release Overshots held in Stock - Celle As at 4/14/1998

Catch Size
Tool Od
Standard Box Conn.
Tensile Yield (Metric Ton)

Page 24
 JDC Slick Catch

Baker Oil Tools - Celle

Baker JDC Hydraulic Release Slick Catch Overshots held in Stock - Celle

As at 4/14/1998
Catch Size
Tool Od
Standard Box Conn.
Tensile Yield (Metric Ton)

Page 25