Scribd
Upload
340 views10 pages

Rotary Marking Instructions For Dominator II

This document provides instructions for using a Lasermark2 software for rotary laser marking. It outlines how to open the software, enter text for marking, set up marking parameters for rotary mode, check the focal distance, and start the rotary marking process. The instructions guide the user through setting up splits and positioning marks between letters on a rotating part.

Uploaded by

Ivan Intro
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
340 views10 pages

Rotary Marking Instructions For Dominator II

This document provides instructions for using a Lasermark2 software for rotary laser marking. It outlines how to open the software, enter text for marking, set up marking parameters for rotary mode, check the focal distance, and start the rotary marking process. The instructions guide the user through setting up splits and positioning marks between letters on a rotating part.

Uploaded by

Ivan Intro
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 10

(Original Instruction)

Instructions for Rotary Marking

COBALT Dominator

lasermarktech.com Laser Marking Technologies, LLC 1


Thank you for choosing LMT
for your laser needs!
please feel free to contact us per the methods listed below.

Corporate Headquarters Authorized European Representative


Web: www.lasermarktech.com
Web: www2.gsetechnology.com
LASER MARKING TECHNOLOGIES
1101 W. Sanilac Rd. Caro, Michigan 48723 USA GSE Technology B.V.
Dubloen 11
E-mail: 5751 PX Deurne
General information: [email protected] Netherlands
Sales: [email protected]
Engineering: [email protected] Email:
Technical Support: [email protected] General Information: [email protected]
Service / Parts Department: Sales:[email protected]
[email protected] Phone: +31(0)493 35 21 21
Phone: +1(866).799.0199 Fax: +31 (0)493 35 21 25
Fax: +1(989).673.1655

lasermarktech.com Laser Marking Technologies, LLC 2


Double click on the Lasermark2
software.

1) Double click on the


LaserMark2 Software icon or
double click the Rotary Sample
file

2) Select DESIGNED, then click


ok.
Note. ( no password needed )

3) The LaserMark 2
software will open
up.

lasermarktech.com Laser Marking Technologies, LLC 3


Entering a simple line of text.
4) Insert the part
Diameter

3) Release the
mouse button
1) Select the Draw
and the default
Text Icon
word TEXT will
appear.

2) Drag
5) The text can then be modified
mouse over
here. (NOTE: You must select the
the grid near
apply Icon after any changes)
the center

lasermarktech.com Laser Marking Technologies, LLC 4


Setting up general marking
parameters.

General parameter
in inches starter
Be sure to unmark Use settings.
Default Program.

lasermarktech.com Laser Marking Technologies, LLC 5


Entering Rotary Mark Mode

Select Rotary Mark

lasermarktech.com Laser Marking Technologies, LLC 6


Rotary-Y Direction Setting
Click the F3 Parameters button on the Rotary Mark screen or hit the F3 key to enter
the Configuration Parameters for the Rotary Axis. Settings on the left are default for
the R3JT

1) Select the Draw


Text Icon

lasermarktech.com Laser Marking Technologies, LLC 7


Checking Focal Distance
Use the focal stick to check the focal distance.
The stick will go between the top of your part
and the rim on the lens. Note: NOT THE
GLASS

Check your focal distance and


positioning of the marking on
you round part

lasermarktech.com Laser Marking Technologies, LLC 8


Rotary Mark Screen
When this box is checked, the rotary Origin buttons are used to home the axiss if they had not previously been homed (z axis is most
will move to center in between the often homed when the software is opened and the rotary Y axis does not have a home switch
red dashed lines you have inserted making it unnecessary to home as well) If a home switch is used, the origin button will appear.
onto the screen (when using, be
certain that no unwanted lines our The Axis step field is the distance you can manually move the axiss by holding down the ctrl
outside of your viewing area by first key and pushing and the up/down arrow keys for the Y axis (if rotary is set up as X, use left/right)
scrolling right/left then up/down)
If Mark by split line is
unchecked, this is the field that
determines the spacing of the
rotary move for each section of
marking. (if the circumference of
your part was a total of 1, a
.25 split size would split the
marking into 4 pieces.
Double click anywhere to add a split line/
right click on a line to delete the line/ left
click and drag a line to move it anywhere

It is most
convenient to
place splits
between
letters/objects so
the entire letter is
marked before the
move, and a split
is not created on
the letter itself
Will display a box where the during marking.
marking will begin.

Will allow you to exit Rotary


Mark mode and modify text or With the door closed and the focal distance
mark regularly checked (see previous page), click mark, and
the marking process will begin with
lasermarktech.com Laser Marking Technologies, LLC 9
automated rotary movements in between
markings according to the split scenario.
Thank You

FOR CHOOSING LMT AS YOUR LASER


MARKING PARTNER

For technical support call


TOLL FREE (866)-799-0199
Ask for technical support.

lasermarktech.com Laser Marking Technologies, LLC 10

You might also like