Scribd
Upload
172 views2 pages

Calculation Thickness of Tube : Design Data

The document calculates the required thickness of a tube based on design parameters. It determines that under internal pressure, the minimum required thickness is 1.53 mm. It then calculates the maximum allowable external pressure of 0.414 Kg/mm^2 based on the tube dimensions and material properties. It confirms that the design external pressure of 0.085 Kg/mm^2 is less than the maximum allowable, so the tube thickness meets requirements.

Uploaded by

Mohammad Hamdani
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
172 views2 pages

Calculation Thickness of Tube : Design Data

The document calculates the required thickness of a tube based on design parameters. It determines that under internal pressure, the minimum required thickness is 1.53 mm. It then calculates the maximum allowable external pressure of 0.414 Kg/mm^2 based on the tube dimensions and material properties. It confirms that the design external pressure of 0.085 Kg/mm^2 is less than the maximum allowable, so the tube thickness meets requirements.

Uploaded by

Mohammad Hamdani
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 2

DOC.

NO :
PROGRAM NAME : TUBE01 REV.NO :
VERSION : 1.0 PAGE : /

*** CALCULATION THICKNESS OF TUBE ***


**DESIGN DATA** ITEM.NO : E-5217
MATERIAL = A179
OUTSIDE DIA. OF TUBE Do = 19.05 mm
USED THICKNESS t= 2.11 mm
ALLOWABLE STRESS S= 9.42 Kg/mm2
CORROSION ALLOWANCE C= 1.5 mm
JOINT EFFICIENCY E= 1
DESIGN TUBE LENGTH L= 3000 mm

1. UNDER INTERNAL PRESSURE


DESIGN TEMPRATURE T= 180 C
o

DESIGN PRESSURE P= 0.030 Kg/mm2


P x Ro
t1 = + C
S E + 0.4P

0.03 x 9.525
= + 1.5 = 1.53 mm
9.42 x 1 + 0.4 x 0.03

2. UNDER EXTERNAL PRESSURE


DESIGN TEMPERATURE T= 200 C
o

DESIGN PRESSURE P' = 0.085 Kg/mm2

Do / ( t - C ) = 19.05 / ( 2.11 - 1.5 ) 31.230

L / Do = 3000 / 19.05 = 157.48

FOR TUBES HAVING ( Do / ( t - C ) VALUE > 10

FROM CHART, FACTOR A = 0.016 ; B= 13800 PSI = 9.7 Kg/mm2


THE MAXIMUM ALLOWABLE EXTERNAL PRESSURE
4xB
Pa1 = -------------------------
3 x Do / ( t - C )

4 x 9.70
= -------------------------- = 0.41413823 Kg/mm2
3 x 19.05 / ( 2.11 - 1.5 )

P' = 0.085 Kg/mm^2 < Pa = 0.414 Kg/mm^2 O.K !!


FOR TUBES HAVING ( Do / ( t - C ) VALUE < 10
FOR TUBES HAVING ( Do / ( t - C ) VALUE > 10

4xB
Pa1 = -------------------------
3 x Do / ( t - C )

4 x 9.70
= -------------------------- = 0.414138 Kg/mm2
3 x 19.05 / ( 2.11 - 1.5 )
2.167 x ( t - C )
Pa1 = [ ------------------------ - 0.0833 ] x B
Do

2.167 x ( 2.11 - 1.5 )


= [ ------------------------ - 0.0833 ] x 9.70 = -0.135 Kg/mm2
19.05

2xSx(t-C) (t-C)
Pa2 = -------------------------- [ 1 - -------------]
Do Do

2 x 9.42 x ( 2.11 - 1.5 ) ( 2.11 - 1.5 )


= -------------------------- [ 1 - ------------------ ] = 58.396 Kg/mm2
19.05 19.05

P' = 0.085 Kg/mm^2 < Pa = 0.414 Kg/mm^2 O.K !!


0.414138

You might also like