Scribd
Upload
170 views1 page

1655

The LL1655 is a C-core mains isolation transformer designed to eliminate DC current. It has an estimated power rating of 300VA that can be increased with cooling. Key specifications include physical dimensions of 53x90x115mm, a weight of 2.5kg, winding resistances of 3.3Ω and 2.9Ω, and an isolation between windings and core of 4kV. The transformer can be used to provide 230V or 115V output from 230V input.

Uploaded by

Parker Fly
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
170 views1 page

1655

The LL1655 is a C-core mains isolation transformer designed to eliminate DC current. It has an estimated power rating of 300VA that can be increased with cooling. Key specifications include physical dimensions of 53x90x115mm, a weight of 2.5kg, winding resistances of 3.3Ω and 2.9Ω, and an isolation between windings and core of 4kV. The transformer can be used to provide 230V or 115V output from 230V input.

Uploaded by

Parker Fly
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

AB LARS LUNDAHL

Tibeliusgatan 7 Phone: Int. +46-176 139 30 Fax: Int. +46-176 139 35


S-761 50 NORRTLJE Nat. 0176-139 30 Nat. 0176-139 35
SWEDEN
Mains Isolation Transformer
LL1655
LL1650 is a C-core mains transformers for isolation and DC current elimination. The core is assembled with a
carefully selected, very small air-gap to compensate for any mains DC-unbalance. Estimated power rating 300
VA which can be increased with good cooling.

Physical dimensions, pin and mounting hole layout (all dimensions in mm)
53
Connections

7 5 3 1

4 x M4
Mounting holes
90 115
Bottom view
16 14 12 10

78 75 78

Weight: 2.5 kg
Copper resistance, windings 1 - 3 and 7 - 5 respectively 3.3
Copper resistance, windings 10 - 12 and 14 - 16 respectively 2.9
Isolation between windings / between windings and core 4 kV / 4 kV

Winding schematics:
1 3 7 5

Coil 1 Coil 2

1 1 1 1
0 2 6 4

Suggested use:
230 V in, 230 V out
1 10
3 LL1655 12
5 14
7 16

230 V in, 115 V out


1 10
3 LL1655 12
5 14
7 16

115 V in, 230 V out


1 10
3 LL1655 12
5 14
7 16

R970207

You might also like