History of Computers: CSCA0101 Computing Basics

CSCA0101 Computing Basics
CSCA0101
COMPUTING BASICS
Chapter 1
History of Computers
1
Topics
1. Definition of computer
2. Earliest computer
3. Computer History
4. Computer Generations
2
Definition of Computer
Computer is a programmable machine.
Computer is a machine that manipulates data
according to a list of instructions.
Computer is any device which aids humans in
performing various kinds of computations or
calculations.
3
Definition of Computer
Three principles characteristic of computer:
It responds to a specific set of instructions in a well-

defined manner.
It can execute a pre-recorded list of instructions.
It can quickly store and retrieve large amounts of
data.
4
Earliest Computer
Originally calculations were computed by humans,
whose job title was computers.
These human computers were typically engaged in the
calculation of a mathematical expression.
The calculations of this period were specialized and
expensive, requiring years of training in mathematics.
The first use of the word "computer" was recorded in
1613, referring to a person who carried out
calculations, or computations, and the word continued
to be used in that sense until the middle of the 20th
century.
5
Tally Sticks
A tally stick was an ancient memory aid device to
record and document numbers, quantities, or even
messages.
Tally sticks
6
Abacus
An abacus is a mechanical device used to aid an
individual in performing mathematical calculations.
The abacus was invented in Babylonia in 2400 B.C.
The abacus in the form we are most familiar with
was first used in China in around 500 B.C.
It used to perform basic arithmetic operations.
7
Abacus
Earlier Abacus Modern Abacus
8
Napiers Bones
Invented by John Napier in
1614.
Allowed the operator to
multiply, divide and
calculate square and cube
roots by moving the rods John Napier
around and placing them in

specially constructed boards.
Napiers Bones
9
Slide Rule
Invented by William Oughtred
in 1622.
Is based on Napier's ideas
about logarithms.
Used primarily for
multiplication William Oughtred
division
roots
logarithms
Trigonometry
Not normally used for addition
or subtraction. Slide Rule
10
Pascaline
Invented by Blaise Pascal in
1642.
It was its limitation to addition
and subtraction.
It is too expensive.
Blaise Pascal
Pascaline
11
Stepped Reckoner
Invented by Gottfried
Wilhelm Leibniz in 1672.
The machine that can add,
subtract, multiply and divide
automatically.
Gottfried Wilhelm Leibniz
Stepped Reckoner
12
Jacquard Loom
The Jacquard loom is a mechanical loom,
invented by Joseph-Marie Jacquard in 1881.
It an automatic loom controlled by punched cards.
Joseph-Marie Jacquard Jacquard Loom
13
Arithmometer
A mechanical calculator invented
by Thomas de Colmar in 1820,
The first reliable, useful and
commercially successful
calculating machine.
The machine could perform the Thomas de Colmar
four basic mathematic functions.

The first mass-produced
calculating machine.
Arithmometer
14
Difference Engine and Analytical Engine
It an automatic, mechanical calculator designed to
tabulate polynomial functions.
Invented by Charles Babbage in 1822 and 1834
It is the first mechanical computer.
Difference Analytical
Charles Babbage Engine Engine
15
First Computer Programmer

In 1840, Augusta Ada Byron
suggests to Babbage that he use
the binary system.
She writes programs for the
Analytical Engine.
Augusta Ada Byron
16
Scheutzian Calculation Engine

Invented by Per Georg Scheutz in
1843.
Based on Charles Babbage's
difference engine.
The first printing calculator.
Per Georg Scheutz
Scheutzian Calculation Engine
17
Tabulating Machine
Invented by Herman
Hollerith in 1890.
To assist in summarizing
information and accounting.
Herman Hollerith
Tabulating Machine
18
Havard Mark 1
Also known as IBM Automatic

Sequence Controlled Calculator
(ASCC).
Invented by Howard H. Aiken in
1943 Howard H. Aiken
The first electro-mechanical

computer.
Mark 1
19
Z1
The first programmable computer.
Created by Konrad Zuse in
Germany from 1936 to 1938.
To program the Z1 required that
the user insert punch tape into a
Konrad Zuse
punch tape reader and all output
was also generated through
punch tape.
Z1
20
Atanasoff-Berry Computer (ABC)

It was the first electronic digital computing device.
Invented by Professor John Atanasoff and
graduate student Clifford Berry at Iowa State
University between 1939 and 1942.
Professor John Atanasoff Atanasoff-Berry Computer
21
ENIAC
ENIAC stands for Electronic
Numerical Integrator and
Computer.
It was the first electronic general-
purpose computer.
Completed in 1946.
Developed by John Presper
Eckert and John W. Mauchl.
ENIAC
22
UNIVAC 1
The UNIVAC I (UNIVersal Automatic Computer 1)
was the first commercial computer.
Designed by J. Presper Eckert and John
Mauchly.
UNIVAC 1
23
EDVAC
EDVAC stands for Electronic
Discrete Variable Automatic
Computer
The First Stored Program
Computer
Designed by Von Neumann in 1952.
It has a memory to hold both a EDVAC
stored program as well as data.
24
The First Portable Computer

Osborne 1 the first portable computer.
Released in 1981 by the Osborne Computer
Corporation.
Osborne 1
25
The First Computer Company

The first computer company was the Electronic
Controls Company.
Founded in 1949 by J. Presper Eckert and John
Mauchly.
26
Computer Generations
There are five generations of computer:
First generation 1946 - 1958

Second generation 1959 - 1964
Third generation 1965 - 1970
Fourth generation 1971 - today
Fifth generation Today to future
27
The First Generation
The first computers used vacuum
tubes for circuitry and magnetic
drums for memory, and were often
enormous, taking up entire rooms.
They were very expensive to operate
and in addition to using a great deal of
electricity, generated a lot of heat,
which was often the cause of
malfunctions.
Vacuum tube
28
The First Generation
First generation computers relied on machine
language, the lowest-level programming language
understood by computers, to perform operations,
and they could only solve one problem at a time.
Input was based on punched cards and paper tape,
and output was displayed on printouts.
29
The Second Generation
Transistors replaced vacuum tubes
and ushered in the second generation
of computers.
One transistor replaced the
equivalent of 40 vacuum tubes.
Allowing computers to become
smaller, faster, cheaper, more
energy-efficient and more reliable.
Still generated a great deal of heat Transistor
that can damage the computer.
30
The Second Generation
Second-generation computers moved from cryptic
binary machine language to symbolic, or assembly,
languages, which allowed programmers to specify
instructions in words.
Second-generation computers still relied on punched
cards for input and printouts for output.
These were also the first computers that stored their
instructions in their memory, which moved from a
magnetic drum to magnetic core technology.
31
The Third Generation
The development of the integrated
circuit was the hallmark of the third
generation of computers.
Transistors were miniaturized and
placed on silicon chips, called
semiconductors, which drastically
increased the speed and efficiency of
computers.
Much smaller and cheaper compare Integrated Circuit
to the second generation computers.
It could carry out instructions in
billionths of a second.
32
The Third Generation

Users interacted with third generation computers
through keyboards and monitors and interfaced with
an operating system, which allowed the device to
run many different applications at one time with a
central program that monitored the memory.
Computers for the first time became accessible to a
mass audience because they were smaller and
cheaper than their predecessors.
33
The Fourth Generation
The microprocessor brought the
fourth generation of computers, as
thousands of integrated circuits
were built onto a single silicon chip.
As these small computers became
more powerful, they could be linked
together to form networks, which
eventually led to the development
of the Internet. Microprocessor
Fourth generation computers also

saw the development of GUIs, the
mouse and handheld devices.
34
The Fifth Generation

Based on Artificial Intelligence (AI).
Still in development.
The use of parallel processing and superconductors
is helping to make artificial intelligence a reality.
The goal is to develop devices that respond to
natural language input and are capable of learning
and self-organization.
There are some applications, such as voice
recognition, that are being used today.
35

History of Computers: CSCA0101 Computing Basics

Uploaded by

Copyright:

Available Formats

History of Computers: CSCA0101 Computing Basics

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

History of Computers: CSCA0101 Computing Basics

Uploaded by

Copyright:

Available Formats

CSCA0101 Computing Basics

It responds to a specific set of instructions in a well-

Earlier Abacus Modern Abacus

around and placing them in

Joseph-Marie Jacquard Jacquard Loom

four basic mathematic functions.

First Computer Programmer

Augusta Ada Byron

Scheutzian Calculation Engine

Scheutzian Calculation Engine

Also known as IBM Automatic

The first electro-mechanical

Atanasoff-Berry Computer (ABC)

Professor John Atanasoff Atanasoff-Berry Computer

The First Portable Computer

The First Computer Company

First generation 1946 - 1958

The Third Generation

Fourth generation computers also

The Fifth Generation

You might also like