Scribd
Upload
249 views7 pages

FlightSimPM B737 TQ User Manual

manual flightsimpm TQ 737

Uploaded by

newah
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
249 views7 pages

FlightSimPM B737 TQ User Manual

manual flightsimpm TQ 737

Uploaded by

newah
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
You are on page 1/ 7
B737 Throttle Quadrant user manual B737 Throttle Quadrant standard version 21.5cm X 22.5cm X h36cm B737 Throttle Quadrant Pro version 26.cm X 22.5cm X h 78cm The throttle quadrant it’s plug n play no software needed and can be configured trough default menu or FSUIPC Connection is done trough a single USB Cable but if you have a lot of hardware connected at the same time i recommend a USB hub switch with it’s own power supply 1.Plug the throttle into your PC system and make sure it’s recognized by windows 2.Start FSX/FS2009 delete all the preassigned joystick commands form the default menu.This needs to be done one time only Throttle Quadrants axis configuration 3.Select corresponding command for each quadrant axis 4.Double click on menu command and then move the corresponding axis 5.Set reverse for all axis SETTINGS - CONTROLS. ‘SETTINGS - CONTROLS: Trim wheel configuration and axis sensitivity/dead zone 6.Return to “BUTTONS/KEYS” menu select “controller type” and control surfaces from “event category”. Scroll down for corresponding commands elevator trim up/down Move the TQ trim wheel back/forward for trim up/down SETTINGS - CONTROLS

You might also like