Equilibrium concentration of interstitial atoms

In many metals, especially in transition metals, interstitial atoms such as

carbon, nitrogen, oxygen, hydrogen can be present up to a certain extent
depending on the metal.

There are mainly two types of interstitial voids present in the structure, where
these atoms can sit: tetrahedral (surrounded by four solvent atoms) and
octahedral (surrounded by six solvent atoms).

However, since impurities prefer to occupy octahedral interstices, we shall
mainly consider this type of voids only.

Let us first consider a BCC crystal


In general the size of the interstitial atoms is much larger than the interstitial void
and lattice surrounding the interstitial will be strained. That means enthalpy of the
system will be increased.

Consider the increase in enthalpy because of addition of one mole of interstitial

atoms is H I

The enthalpy increment of the system because of addition of XI is expressed by

H = X I H I
nI
Where X I = Number of interstitial atom is nI
N0

Further, there will be two different types of contribution on entropy

Vibration of atoms A, next to interstitial atoms will change from normal mode of
vibration and will be more random and irregular because of distortion of the lattice

Sthermal = X I S I
S I is the change of the entropy of one mole of atoms because of change in
vibration pattern

From the crystal structure, we can say that for 2 solvent atoms there are 6 sites for
interstitial atoms. So if we consider that there are No numbers of A atoms then there
will be 3No numbers of sites available for interstitial atoms.

In other sense, we can say that nI atoms will randomly occupy in 3No sites
available. So the configurational entropy can be written as
3N 0!
S config = k ln w = k ln Following Stirlings approximation ln N!= N ln N N
nI !(3N 0 nI )!

S config = k [3N 0 ln 3N 0 nI ln nI (3N 0 nI ) ln(3N 0 nI )]

n 3N n
S config = R 3 ln 3N 0 I ln nI 0 I ln(3 N 0 nI )
N0 N0
3N 0 n nI
= R 3 ln I ln
3 N 0 nI N 0 3 N 0 nI

3 XI
S config = R 3 ln X I ln
3 XI 3 XI

3 XI

So the total entropy change S = X I S I + R 3 ln X I ln
3 X I 3 X I

Free energy in presence of interstitial impurities

G = G A + G = G A + H TS I
3 XI
G = G A + X I H I TX I S I RT 3 ln X I ln
3 X I 3 X I

To find the equilibrium concentration, we need to take

dG
=0
dX I
3 X XI
H I TS I RT I ln X I + ln(3 X I ) =0
3 XI XI 3 XI
XI
H I TS I + RT ln =0 since XI 0
3 XI

H I TS I GI
X I = 3 exp = 3 exp
RT RT

GI is the activation energy barrier

 Let us now consider the FCC crystal

If we consider FCC crystal, then the number of sites available for interstitial
atoms are 4. Further in a FCC unit cell, total 4 solvent atoms are accommodated.
So we can say that for No solvent atoms there will be No sites available for
interstitial atoms. Like previous example, we consider nI interstitial atoms which
will occupy randomly.

Then following similar procedure, we can show the equilibrium concentration of

interstitial atoms present in a metal with FCC crystal as

G I
X I = exp
RT

So in general, we can write that the equilibrium concentration of interstitial
impurities present is

G I
X I = B exp
RT

B depends on the crystal structure

H I
X I = X I0 exp
RT

H I is the activation enthalpy for interstitial impurities

S
X I0 = B exp is the pre-exponential factor
R
Why concentration of carbon in -Fe with BCC structure is less than
-Fe with FCC structure?

First let us consider FCC structure (-Fe)

Packing factor of FCC lattice 0.74

This indicates the presence of voids. Let us discuss it more elaborately.

In a FCC crystal there are mainly two types of voids:

Tetrahedral: coordination number (CN) is 4. That means the void is surrounded by

4 atoms.
Octahedral: CN is 6. That means the void is surrounded by 6 atoms.

There are 8 tetrahedral voids in a unit cell. That means 2 voids per atom.

There are 4 octahedral voids in a unit cell. That means 1 void per atom.

However, impurities prefer to occupy octahedral voids.

Because the ratio of the radius of the tetrahedral void to atom is 0.225 and the
same for the octahedral void is 0.414.

The ratio of the radius of the carbon atom (size is 77 pm) to Fe (when it has FCC
crystal) is 0.596.

So when a carbon atom occupies any void, lattice will be distorted to increase
the enthalpy.

Distortion will be less if it occupies the octahedral voids.

Although it increases the enthalpy, carbon atoms will be present up to a certain

extent because of the gain in entropy, as explained previously, which decreases
the free energy.
 Now let us consider the BCC unit cell ( - Fe)

Tetrahedral void

Octahedral void

Packing factor of BCC lattice 0.68

So total void in a BCC unit cell is higher than FCC cell.

However, there are 12 (6 per atom) tetrahedral and 6 (3 per atom) octahedral voids
present.

This number is higher than the number of voids present in a FCC unit cell.

Unlike voids in FCC lattice, in a BCC lattice the voids are distorted. That means if
an atom sits in a void, it will not touch all the host atoms.

The ratio of the radius of tetrahedral void to atom is 0.29 and the radius of
octahedral void to atom is 0.155.

The ratio of the radius of the C atom (size is 77 pm) to Fe (when it has BCC crystal)
is 0.612.

So it is expected that in a BCC unit cell, impurities should prefer tetrahedral voids.

However, although the octahedral void size is small, planar radius which has 4
atoms on the same plane is 79.6 pm, which is larger that the C atom size. That means
it needs to distort only other two atoms.

On the other hand if C sits in the tetrahedral void it has to distort all four atoms.

So in Fe with BCC unit cell C occupies the octahedral voids


Now the octahedral void size in -Fe (FCC) is higher than -Fe (BCC).

So naturally the distortion in a BCC cell will be higher and the activation energy for
impurities to occupy a void in a BCC cell also will be higher.

This is the reason that we find much lower solubility limit of C in -Fe.

Let us consider the C concentration in -Fe (BCC)
77300 J / mole In terms of mole fraction X I = 11.2 exp
77300 J / mole
Wt % = 240 exp
RT RT
-2
10
-2
10

Carbon concentration mole fraction (XI)

0.022 wt% -4
10
-4
Carbon concentration wt%

10
-6
10
-6
10 -8
10
-8
10 -10
10

-10
10 o 10
-12
727 C

-12 -14
10 10
0 100 200 300 400 500 600 700 800 0 100 200 300 400 500 600 700 800
o o
Temperature ( C) Temperature ( C)

At 727 C, carbon concentration in -Fe is maximum (0.022 wt%), which is

equivalent to mole fraction of ~10-3. That means there is one C atom present in a cube
of 10 atoms in each direction. That further means that only one carbon atom is
present in 3000 octahedral voids