Scribd
Upload
64 views4 pages

Automated Water Pump With Dry Run Intimation Using GSM

The document describes an automated water pump system that uses a microcontroller, LCD display, GSM modem, and IR sensors. The system allows users to remotely turn the pump motor on and off via SMS messages. It also automatically shuts off the pump motor if the IR sensors detect a dry run condition without water flow. When this occurs, the system notifies the user via SMS that it has shut down the pump motor.

Uploaded by

Arnel Dimaano
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
64 views4 pages

Automated Water Pump With Dry Run Intimation Using GSM

The document describes an automated water pump system that uses a microcontroller, LCD display, GSM modem, and IR sensors. The system allows users to remotely turn the pump motor on and off via SMS messages. It also automatically shuts off the pump motor if the IR sensors detect a dry run condition without water flow. When this occurs, the system notifies the user via SMS that it has shut down the pump motor.

Uploaded by

Arnel Dimaano
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 4

Automated Water Pump with Dry Run Intimation using GSM

An automated water pump system for farmers or any user needing it for filling
tanks as well as for using water supply. The system consists of a pump motor
along with LCD and GSM modem controlled by a microcontroller. The system
allows users to remotely switch on/off motor as well as the system consists of an
automated water sensing system that automatically switches off the pump motor as
soon as it senses that water supply has stopped and the motor is on a dry run.

Our system uses a GSM modem to send and receive user commands and it then
operates the pump motor based on user SMS. The system also consists of IR
sensors to detect water flow through the pipe as long as water flow is detected
through pipe the pump motor runs. As soon as the sensor detects water supply
has stopped the microcontroller is notified of the dry run condition. The system now
notifies the user that it has shut down the motor on noticing dry run condition.
Block Diagram
Hardware Specifications

Micro-switch

Atmega 328 Microcontroller

Relay driver

LCD display

Relay

Load (PUMP)

GSM modem

Software Specifications

Arduino compiler

MC Programming Language: Embedded C


GSM Modem

The SIM900 is a complete Quad-band GSM/GPRS


solution in a SMT module which can be embedded in
the customer applications. Featuring an industry-
standard interface, the SIM900 delivers GSM/GPRS
850/900/1800/1900MHz performance for voice, SMS,
Data, and Fax in a small form factor and with low
power consumption. With a tiny configuration of 24mm
x 24mm x 3 mm, SIM900 can fit almost all the space requirements in your M2M application,
especially for slim and compact demand of design.

You might also like