0% found this document useful (0 votes)
264 views3 pages

LQM2 Front Panel Huawei

The document summarizes the front panel of the LQM2 device. It has indicators like STAT and SRV and ports like TX1/RX1-TX8/RX8, IN1/OUT1, IN2/OUT2. The ports are used for transmitting and receiving client-side and WDM-side signals depending on the device's working mode (e.g. 1 x AP8 ODU1 mode, 2 x AP4 ODU1 mode). Tables 1 and 2 further explain the types and functions of the ports based on different working modes.

Uploaded by

Fresner Diaz
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
264 views3 pages

LQM2 Front Panel Huawei

The document summarizes the front panel of the LQM2 device. It has indicators like STAT and SRV and ports like TX1/RX1-TX8/RX8, IN1/OUT1, IN2/OUT2. The ports are used for transmitting and receiving client-side and WDM-side signals depending on the device's working mode (e.g. 1 x AP8 ODU1 mode, 2 x AP4 ODU1 mode). Tables 1 and 2 further explain the types and functions of the ports based on different working modes.

Uploaded by

Fresner Diaz
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 3

Front Panel

There are indicators and ports on the LQM2 front panel.


Appearance of the Front Panel

Figure 1shows the front panel of the LQM2.


Figure 1 Front panel of the LQM2

Indicators

There are some indicators on the front panel.

Working status indicator (STAT) -red, green, orange

Service status indicator (SRV) - red, green, orange

WDM-side receive optical power status indicator (INn)- red, green, orange
For details on the indicators, refer to Board Indicators.

In VA8 mode, IN1 to IN4 are off.

Ports

RX1/TX1 to TX6/RX6 are client-side ports, while IN1/OUT1 and IN2/OUT2 are WDM-side ports.
TX7/OUT3/RX7/IN3 and TX8/OUT4/RX8/IN4 can work as client-side ports or WDM-side ports based on the
working mode of the board.

When the LQM2 board adopts 1 x AP8 ODU1 mode:

Table 1 Types and functions of the LQM2 ports (1 x AP8 ODU1 mode)

Port Required Cable Remarks


Port Type Function

TX1/RX LC Transmits/Receiv Connectors, Managem TX7/O


1 to (optical es the first group ent Cables UT3/RX7/IN3 and
TX8/RX ports) service signals TX8/OUT4/RX8/I
8 RJ-45 from client-side N4 work as the
(electric equipment. client-side ports
al ports)
Table 1 Types and functions of the LQM2 ports (1 x AP8 ODU1 mode)

Port Required Cable Remarks


Port Type Function

IN1/OUT LC Connected to the Connectors TX7/RX7 and


1 OADM board to TX8/RX8.
receive/transmit WDM-
the WDM signals side optical ports
coming from the provide the dual
active channel. fed and selective
receiving function.
IN2/OUT LC Connected to the
2 OADM board to
receive/transmit
the WDM signals
coming from the
standby channel.

When the LQM2 board adopts 2 x AP4 ODU1 mode:

Table 2 Types and functions of the LQM2 ports (2 x AP4 ODU1 mode)

Port Required Cable Remarks


Port Type Function

TX1/RX LC Transmits/Receiv Connectors, Managem TX7/O


1 to (optical es the first group ent Cables UT3/RX7/IN3 and
TX8/RX ports) service signals TX8/OUT4/RX8/I
8 RJ-45 from client-side N4 work as the
(electric equipment. client-side ports
al ports) TX7/RX7 and
TX8/RX8.
IN1/OUT LC Connected to the Connectors The
1 OADM board to client-side ports
receive/transmit TX1/RX1-
the first group TX4/RX4 work
WDM signals. with the WDM-
Table 2 Types and functions of the LQM2 ports (2 x AP4 ODU1 mode)

Port Required Cable Remarks


Port Type Function

IN2/OUT LC Connected to the


2 OADM board to
receive/transmit
the second group
WDM signals.

side port
IN1/OUT1.
The
client-side ports
When the LQM2 board adopts 2 x AP3 ODU1 mode: TX5/RX5-
TX8/RX8 work
with the WDM-
side port
IN2/OUT2.
When the TNF2LQM2 board adopts VA8 mode: Both
the two port
groups support
single fed and
single receiving.

When the LQM2 board adopts 2 x AP2 ODU0 mode:

You might also like