2014-2016 InnovMetric Software Inc. All rights reserved.

This manual, as well as the software described in it, is furnished under license and may be used or
copied only in accordance with the terms of such license. The content of this document is
furnished for informational use only, and is subject to change without notice. InnovMetric
Software Inc. assumes no responsibility or liability for any errors or inaccuracies that may appear
in this document.

Except as permitted by such license, reproduction in whole or in part in any way without written
permission from InnovMetric Software is strictly prohibited.

PolyWorks is a registered trademark of InnovMetric Software Inc. InnovMetric,

PolyWorks|Inspector, PolyWorks|Modeler, PolyWorks|Talisman, PolyWorks|Viewer, IMInspect,
IMEdit, IMAlign, IMMerge, IMCompress, IMTexture, and "The Universal 3D Metrology Software
Platform" are trademarks of InnovMetric Software Inc. SmartGD&T is a trademark of Multi Metrics
Inc. All other trademarks are the property of their respective owners.

InnovMetric Software Inc.

2014 Cyrille-Duquet, Suite 310
Qubec, Qubec, Canada G1N 4N6
Tel.: (418) 688-2061 Fax: (418) 688-3001

Essentials for PolyWorks|Inspector Probing Package

Essentials PolyWorks|Inspector Probing Package

PolyWorks 2016
[June 22 2016] TEC-0050-2016-EN-2.0
Contents

POLYWORKS|INSPECTOR PROBING PACKAGE

17 Introducing the Essentials
19 Introducing the PolyWorks Workspace Manager
19 Adding license keys
20 Introducing the workspace format
21 Starting PolyWorks modules
22 Setting essential project options

IMINSPECT PROBING
25 The probing workflow with a CAD model
26 Understanding the workflow
26 Prealign part to Reference object
26 Refine part alignment to Reference object
28 The probing workflow without a CAD model
29 Understanding the workflow
29 Align part to standard axes
29 Create coordinate systems

FUNDAMENTALS
32 The graphical user interface
33 The graphical user interface specific for probing
34 Specifying the required probing plug-ins
34 Connecting to the device
35 Probing toolbars
35 Devices toolbar
35 Probing Device toolbar
37 Probing Device Control toolbar
38 Probing Control toolbar
39 Toolbar functionalities
40 Shortcuts through the interface
41 Moving objects in the 3D scene
42 An object-based approach
42 Objects and their elements
44 Selecting objects

3
45 Selecting elements
48 Selecting elements using the Brush tool
50 Selecting elements using the Freeform Contour tool
52 Selecting a single element

REFERENCE OBJECTS
54 Introducing Reference objects
54 Categories of Reference objects
54 Assigning tolerances
55 Using CAD models to describe nominal parts
55 Importing a CAD model
56 Importing Product and Manufacturing Information (PMI) with
the CAD model
58 Using polygonal models to describe nominal parts
59 Assigning tolerances to Reference objects
59 Assigning tolerances to the entire Reference object
60 Assigning tolerances to specific surfaces

DATA OBJECTS
62 Introducing Data objects
62 Categories of Data objects
63 Probing a part using a probing device plug-in
63 Using the probing device to collect surface points
65 Using the probing device to collect boundary points
67 Creating a new probing session

ALIGN
69 Introducing alignments
69 Alignment tools
70 Introducing data alignments
70 Activating a data alignment
72 Aligning by probing surface points
74 Aligning with features
75 Aligning using a plane-axis-point approach
77 Aligning using center points
79 Aligning using perpendicular planes

4
81 Aligning with reference targets
81 Introducing reference targets
83 Creating reference target points
83 Creating surface reference target points
84 Creating feature reference target points
86 Aligning using reference targets
86 Align using surface and feature reference targets by probing
89 Aligning with Datum Reference Frames
89 Align using a Datum Reference Frame
91 Align a Datum Reference Frame by probing

Coordinate systems
94 Introducing coordinate systems
94 In the 3D scene
94 Using a new coordinate system
95 Understanding the coordinates of a point
96 Creating and activating coordinate systems

MEASURE
100 Introducing measurement objects in IMInspect Probing
100 Measurement objects
100 Automatic project update

Data color maps

102 Measuring deviations using data color maps
102 Data color map types
103 Understanding key parameters
105 Measuring deviations from surfaces
107 Measuring deviations from boundaries
109 Measuring deviations from feature primitives
111 Changing the color map display
113 Displaying data point deviations on a data color map

Features
116 Defining part geometry using features
116 Feature types
117 Feature primitives
117 The feature creation methodology

5
118 The feature creation dialog box
118 Key feature creation parameters
120 Creation methods explained
126 Feature dependencies
127 Duplicating cross-section features in 3D
128 Creating point features
128 Creating nominal point primitives
128 Numerically
129 Anchor
130 Obtaining measured point primitives
130 Probe
132 Constructing point features
132 From Objects
133 From Intersection
135 Creating line features
135 Creating nominal line primitives
135 Numerically
136 Anchor
137 Obtaining measured line primitives
137 Probe
140 Constructing line features
140 From Objects
141 From Intersection
142 Creating plane features
142 Creating nominal plane primitives
142 Pick on CAD Model
143 Numerically
143 Anchor
143 Extract from Polygonal Models
145 Obtaining measured plane primitives
145 Probe
147 Fit
149 Constructing plane features
149 From Objects
151 Creating circle features
151 Creating nominal circle primitives
151 Pick on CAD Model
152 Numerically
152 Anchor
153 Obtaining measured circle primitives

6
153 Probe
156 Fit
157 Constructing circle features
158 From Objects
158 From Intersection
160 Creating slot features
160 Creating nominal slot primitives
160 Pick on CAD Model
161 Numerically
161 Anchor
162 Obtaining measured slot primitives
162 Probe
164 Fit
167 Creating rectangle features
167 Creating nominal rectangle primitives
168 Pick on CAD Model
168 Numerically
169 Anchor
170 Obtaining measured rectangle primitives
170 Probe
173 Fit
175 Creating polygon features
175 Creating nominal polygon primitives
176 Pick on CAD Model
176 Numerically
176 Anchor
177 Obtaining measured polygon primitives
177 Probe
181 Fit
183 Creating ellipse features
183 Creating nominal ellipse primitives
184 Pick on CAD Model
184 Numerically
184 Anchor
185 Obtaining measured ellipse primitives
185 Probe
188 Fit
191 Creating cylinder features
191 Creating nominal cylinder primitives
191 Pick on CAD Model
192 Numerically

7
192 Anchor
192 Extract from Polygonal Models
194 Obtaining measured cylinder primitives
194 Probe
196 Fit
199 Creating cone features
199 Creating nominal cone primitives
199 Pick on CAD Model
200 Numerically
200 Anchor
200 Extract from Polygonal Models
202 Obtaining measured cone primitives
202 Probe
204 Fit
206 Creating sphere features
206 Creating nominal sphere primitives
206 Pick on CAD Model
207 Numerically
207 Anchor
207 Extract from Polygonal Models
209 Obtaining measured sphere primitives
209 Probe
211 Fit
213 Creating surface features
213 Creating the nominal component of surface features
215 Obtaining the measured component of a surface feature
215 Extract
216 By probing existing surface comparison points
218 By probing new surface comparison points
220 From data points
222 Creating slab features
224 Creating polyline features
224 Creating nominal polyline primitives
226 Obtaining measured polyline primitives
226 Probe
228 Constructing polyline features
230 Creating pattern features
232 Creating distance features
234 Creating angle features
236 Editing feature primitives

8
236 Selecting data points of measured primitives
237 Editing the measured points of feature primitives
239 Adding points to a feature
240 Setting measured feature boundaries using the nominal
component
241 Exporting feature primitives

Cross-sections
243 Inspecting 2D part profiles with cross-sections
243 Introducing cross-sections
243 Types of cross-sections
244 Measurement zone
244 Measurement method
244 Display options
245 Creating standard cross-sections
245 Getting the nominal geometry
246 Along Standard Axis
247 Along Curve
249 Radial
250 Anchor
252 Measuring the geometry on the part
252 Probe the geometry

Comparison points
256 Measuring specific locations on a part using comparison points
256 Introducing comparison points
256 Types of comparison points
257 Comparison point creation and measurement methods
257 Understanding key parameters
258 Display options
259 Creating surface comparison points to inspect the surface of a part
259 Getting the nominal geometry
260 Anchor
260 Numerically
261 Sample using Grid
261 From Text File
263 Measuring the geometry on the part
263 Probe the geometry
265 Creating trimmed edge comparison points to inspect sharp edges of
a part

9
265 Getting the nominal geometry
266 Anchor
267 Sample Reference Curve
269 Measuring the geometry on the part
269 Probe the geometry
272 Creating hemmed edge comparison points to inspect the hemmed
edges of a sheet metal part
272 Getting the nominal geometry
273 Anchor
274 Sample Reference Curve
276 Measuring the geometry on the part
276 Probe the geometry

Gauges
280 Measuring part dimensions with gauges
280 Display options
281 Measuring object radii with profile gauges
281 Introducing profile gauges
281 Profile gauge families
281 Profile gauge types
282 Visualizing type usage
282 Creation methods
283 Creation methodology
283 Display options
284 Creating profile gauges
284 Getting the nominal geometry
285 Along Curve
286 Along Standard Axis
288 Measuring the geometry on the part
288 Probe the geometry
291 Measuring flush and gap with flush & gap gauges
291 Introducing flush & gap gauges
291 Flush & gap gauge families
291 Flush & gap gauge types
292 Visualizing type usage
292 Creation methods
293 Creation methodology
293 Display options
294 Typical flush and gap analysis

10
295 Creating flush & gap gauges
295 Getting the nominal geometry
296 Along Curve
297 Along Standard Axis
298 From Text File
300 Measuring the geometry on the part
300 Probe the geometry

Additional tools
304 Measuring displacement during real-time assembly
306 Taking basic measurements interactively
308 Measuring when away from the workstation
308 Using speech recognition
310 Creating new actions through macro scripts
311 Connecting to Talisman
312 Creating level planes
313 Orienting to gravity

REPORT
315 Geometry controls
316 Adding and removing controls
318 Editing control tolerances
319 Using control templates
319 Saving a control template
320 Setting controls using a template
321 Managing control templates
321 Managing existing templates
322 Creating and editing a user control template
324 Controlling features
324 Adding dimensional controls
325 Adding and encoding GD&T controls
327 Available GD&T controls by feature type
328 Defining datum features
329 Defining datum targets
330 Defining composite datums
331 Creating features from measurement envelopes
332 Controlling cross-sections
333 Controlling comparison points

11
334 Controlling profile gauges
335 Controlling flush & gap gauges
336 Annotations
336 Editing an object annotation
336 Setting object annotation contents using a template
337 Editing annotation contents manually
340 Saving an annotation template
341 Managing annotation templates
341 Managing existing templates
342 Creating and editing a user annotation template
343 Modifying the appearance of annotations
344 Repositioning annotations in the 3D scene
345 Visualizing measurement results using the object navigator
346 Reviewing feature measurement results
346 Feature dimension results
347 Feature GD&T controls
349 Reviewing cross-section measurement results
351 Reviewing profile gauge measurement results
353 Reviewing flush & gap gauge measurement results
355 Reporting
356 Working with report tables
356 Creating report tables
358 Setting report table contents using a template
359 Editing report table contents manually
362 Saving a table template
363 Managing table templates
366 Editing the report table format
366 Edit the format of a single report table
366 Specify the formatting options of all new report tables
367 Working with report snapshots
367 Creating report snapshots
368 Editing a report snapshot
370 Working with formatted reports
371 Create formatted reports
372 Edit formatted reports
372 Move or resize report items in the formatted report
373 Add and edit a text field in the report
374 Add and edit a graphical shape in the formatted report
374 Add a fixed image to the formatted report

12
375 Add, reorder, or remove pages from the formatted report
376 Generate a PDF file from a formatted report
377 Exporting report items

INSPECT MULTIPLE PIECES

379 Repeating an inspection on multiple pieces
380 Working with multiple pieces
381 Inspecting a new piece using Play Inspection
383 Customizing guiding instructions
385 Guided feature probing using measurement points
386 Configuring the guided point acquisition mode
387 Defining measurement points from the nominal component
387 Setting the parameters for line features
389 Setting the parameters for plane features
389 Along Boundary
390 Grid
391 Setting the parameters for circle features
392 Setting the parameters for slot features
394 Setting the parameters for rectangle features
396 Setting the parameters for polygon features
398 Setting the parameters for ellipse features
400 Setting the parameters for cylinder features
401 Setting the parameters for cone features
402 Setting the parameters for sphere features
404 Setting the parameters for polyline features
405 Defining custom measurement points
405 Defining measurement points from probed data points
406 Defining measurement points by anchoring
408 Editing and deleting measurement points
408 Editing measurement points numerically
409 Editing measurement points interactively
410 Editing arcs and sides of measurements points
410 Deleting selected measurement points
410 Deleting measurement points interactively
411 Probing features using measurement points
413 Using measurement points with features probed in multiple device
positions
415 The Sequence Editor
415 The Sequence Editor pane

13
420 Using the Sequence Editor
420 Creating a measurement sequence
420 From the autogenerated sequence
421 From recorded actions
422 Customizing a measurement sequence
422 Modifying the order of sequence steps
423 Adding sequence steps
423 Choosing from the Insert menu
424 Dragging from the Tree View
424 Inserting macro scripts
425 Editing sequence steps
425 Defining conditional blocks
427 Evaluating pieces using Statistical Process Control
427 Analyze part dimensions for repeatability using Object Control SPC
429 Sample size
429 Understanding SPC results
432 Analyze part shape for repeatability using Surface Data SPC

WORK WITH MULTIPLE DEVICE POSITIONS

435 Working with multiple device positions
436 The basic acquisition workflow with multiple device positions using
targets
438 Moving the device or the part by probing targets
440 Bundle adjustment
442 Device position uncertainty

APPENDIX
446 Automatic project update
446 Troubleshooting the automatic project update
447 Operations that trigger an automatic project update
448 Setting and saving the user configuration
449 Saving a compressed copy of a project
450 Configuring the probing session
450 Probing device options
454 Probing display options
456 Special reflectors for laser trackers
459 PolyWorks keyboard shortcuts

14
462 Getting help
462 Getting help through the software interface
463 Getting help outside of the software interface
463 The website
463 The Technical Support Zone (TSZ)
463 For direct assistance

15
 PROBING PACKAGE

PolyWorks|Inspector Probing Package

PolyWorks|Inspector Probing
Package is a powerful industrial 3D
metrology software solution
dedicated to single-point contact-
based probing devices that are used
to acquire and control tool and part
dimensions, diagnose and prevent
manufacturing and assembly issues,
guide assembly building through real-
time measurements, and oversee the
quality of assembled products.
INTRODUCING THE ESSENTIALS GETTING STARTED

Introducing the Essentials

About
The Essentials guide is intended to be a companion for new users post-training and
throughout their first year of using PolyWorks.

Approach
The Essentials content is presented following a workflow-based approach. The document is
divided into sections according to specific workflow steps.

Each section is then organized using a tool-based approach, where each tool pertaining to the
subject is documented following the established presentation layout (recipe).

Generally, it has been documented using the default configuration and visual layout with the
exception of the background color of the 3D scene and the font size for certain annotations.
Also, in most cases, only the basic parameters are described.

Document conventions

Navigation through the sections

As mentioned previously, this document has been designed according to the inspection
workflow recommended in PolyWorks. The structure of the document is clearly identified
in the header of each page using the icon and description corresponding to the workflow
step.
The Table of contents, as well as the first page of each section on measurement objects
(data color maps, features, comparison points, cross-sections, and gauges), offer
hyperlinks to the listed subjects.

A menu-based approach

In PolyWorks, most of the functionalities offered in the menus are also available through
toolbars. In this document, the menu paths are documented in the procedure. The
corresponding toolbar buttons are shown to the right, as shown in the example below.

1. Choose Align > Feature-Based > Plane, Axis,

Center Point.

Key parameters

Key parameters, used for the creation of measurement objects, are explained in the
introduction of the section pertaining to the object type, to avoid redundancy. For
example, when creating a feature, it is specified to enter a maximum distance. For
information on this parameter, see the introduction to features.

17
INTRODUCING THE ESSENTIALS GETTING STARTED

Text formatting

The following text formatting conventions are used throughout the Essentials:

Objective and Required:

For each procedure, the objective is stated and the requirements are listed.

Sections:
Each procedure is organized using the following sections:

Steps: present the steps to follow for each tool

Results: present the results in the Tree View (to the left) and the 3D scene (to the right)
Notes: present useful additional information on the current tool
Tips: present hints on how to use the current tool in a specific context

Graphical user interface elements:

Menu paths are presented in gray and italics, and chevrons are used to show the
sequence.
For example: Align > Best-Fit > Data to Reference Objects
Dialog boxes are capitalized.
For example: The Best-Fit Data to Reference Objects dialog box opens.
Parameters are presented in bold.
For example: In the Method list, click Fit to Reference Object Surfaces.

18
THE POLYWORKS WORKSPACE MANAGER GETTING STARTED

Introducing the PolyWorks Workspace Manager

When starting PolyWorks, the PolyWorks Workspace Manager interface displays.

The PolyWorks Workspace Manager manages a PolyWorks process from beginning to end.
This includes the following tasks:

Allows adding software license keys.

Manages all the incoming data files and the results produced by the PolyWorks
modules. As work progresses, files and projects are saved to a container called a
workspace.
Offers simple navigation between PolyWorks modules.

Adding license keys

License keys are required to use PolyWorks. There are two types of licenses: node-
locked or floating. Both types are managed through the IMKey dialog box, which is
available by choosing Tools > IMKey License Management in the PolyWorks
Workspace Manager.

For information on how to add license keys, choose Help > Reference Guides > License Keys.

19
THE POLYWORKS WORKSPACE MANAGER GETTING STARTED

Introducing the workspace format

The PolyWorks Workspace Manager uses a workspace format which is designed to handle all
the results of a point cloud processing project.

Here is a view of a workspace in the When a workspace is saved, it creates one

Workspace Manager. XML file with the .pwk file and one folder with
the _Files suffix. Both file and folder include
the workspace name. The .pwk file is only an
index the folder contains all the data.

The .pwk file and associated _Files folder must remain in the same folder.

20
THE POLYWORKS WORKSPACE MANAGER GETTING STARTED

Starting PolyWorks modules

The PolyWorks Workspace Manager provides direct access to the PolyWorks modules. The
main modules are accessible through the Modules toolbar. Click a module button to launch
the corresponding module. Note that the complete list of modules is offered in Tools >
Modules.

IMInspect

This module is a software tool that allows performing data alignments to

Reference objects, measuring the deviations of Data point clouds and
polygonal models to Reference surfaces, measuring the dimensions of
specific features, and generating comparison and verification reports. Data
acquisition can be performed in real time by probing and scanning the part.

IMInspect Probing

Accessible through the down arrow, this module is a software tool that allows
performing data alignments to Reference objects, measuring the dimensions
of specific features, and generating comparison and verification reports. Data
acquisition can be performed in real time by probing the part.

IMEdit

This module offers a comprehensive set of advanced editing tools for

polygonal models where NURBS patches can be created to conceive NURBS
models or repair polygonal models. IMEdit also allows creating parametric
sketches, which can be imported into CAD modeling software.

IMAlign

This module is a software tool that accepts point clouds from all digitizers,
and permits capturing point clouds in real time, and allows aligning these
point clouds using the shape of the points clouds and, if desired, reference
points.

IMMerge

This module allows automatically merging a set of aligned 3D scans of an

object into a high-resolution polygonal model.

21
SETTING ESSENTIAL PROJECT OPTIONS GETTING STARTED

Setting essential project options

Certain default values and parameters used in the PolyWorks software suite can be set in the
PolyWorks Workspace Manager. The following procedure presents the options that are most
frequently used. For information on the other options, see the PolyWorks Reference Guide
available from the Help menu.

Objective: Set the units of length, the language, the plug-in(s) available in the module, and
enable the Talisman functionality.

Required: The PolyWorks Workspace Manager is open.

Steps

To set project options, choose Tools > Options.

The PolyWorks/Workspace Manager Options
dialog box opens.

Note that changes made to the options do not affect an open module; they apply the next time the
module is launched.

Units of length
On the General page:

1. Select the units of length that will be used by

default for the PolyWorks modules.
2. Click Apply.
Regardless of what units of length are set in the
Workspace Manager options, it is always possible
to change the units within a module after opening
it.

Language
On the Display page:

1. Select the language for the user interface.

2. Click Apply.

22
SETTING ESSENTIAL PROJECT OPTIONS GETTING STARTED

Plug-ins
PolyWorks offers a wide choice of plug-ins that allow the capture of 3D coordinate points by
way of line scanning and probing devices.
To use one or more plug-ins, the appropriate option must be selected. Only selected plug-ins
will be loaded when IMInspect Probing is launched.

On the Plug-ins page:

1. Select one or more plug-ins.

2. Click Apply.
For information on a plug-in, see the custom document specific to this plug-in, which is available
from the Help menu of the application.

Talisman functionality
PolyWorks|Talisman is a remote control application developed to allow controlling a
probing/scanning session using a mobile device (such as Apple iPod touch, iPhone, and
iPad as well as Android mobile devices running Android 4.1 or higher).
To use the Talisman functionality, the appropriate option must be selected.

On the Talisman page:

1. Select PolyWorks server for Talisman.

2. The change applies to all open modules.
For information on PolyWorks|Talisman, see the
Talisman Android or Apple Mobile Device User
Guides and the Talisman Network Security and
Setup Guide, which are available from the Help >
Reference Guides > PolyWorks|Talisman menu
of the application.

3. Click Apply.

Notes

If the Bonjour networking technology, a trademark of Apple Inc., is not installed on the
workstation, the user will be prompted to install it.

23
IMInspect Probing
PROBING USING A CAD INSPECTION WORKFLOW

The probing workflow with a CAD model

Here is the basic inspection workflow when using a probing device to perform the inspection
and a CAD model of the inspected part is available.

Import
Reference object

Align part
to Reference object

Measure
dimensions and deviations

Report
measurement results

25
PROBING USING A CAD INSPECTION WORKFLOW

Understanding the workflow

Import Reference object

Import the nominal information of the part
(CAD model) into the inspection project.

Align part to Reference object

Prealign part to Reference object

Prealign the part to the CAD model to take
advantage of the visual guidance tools.

Refine part alignment to Reference

object
Refine the part alignment to the CAD model
using feature-based alignments, reference
targets, or datum reference frames.

Measure dimensions and

deviations
Perform the inspection of the part by
probing point clouds and/or measurement
objects such as features and comparison
points.

26
PROBING USING A CAD INSPECTION WORKFLOW

Report measurement results

Report the inspection results using tables,
snapshots, and formatted reports.

27
PROBING WITHOUT A CAD INSPECTION WORKFLOW

The probing workflow without a CAD model

Here is the basic inspection workflow when using a probing device to perform the inspection
and no CAD model of the inspected part is available.

Acquire
part data
by probing

Position part

Measure
dimensions and deviations

Report
measurement results

28
PROBING WITHOUT A CAD INSPECTION WORKFLOW

Understanding the workflow

Acquire part data by probing

Acquire part data by probing point clouds
and/or measurement objects such as
features and comparison points on the
actual part.

Position part
Align part to standard axes
Align the probed data points to standard
axes (X, Y, Z) to facilitate reporting. Note that
this step is optional.
OR

Create coordinate systems

Create a coordinate system using the probed
features to orient and locate the probed data
points. This facilitates reporting. Note that
this step is optional.

Measure dimensions and

deviations
Complete the part measurement. Enter
object control nominal values and toler-
ances, if they are known, into the Geometry
Controls pane.

29
PROBING WITHOUT A CAD INSPECTION WORKFLOW

Report measurement results

Report the inspection measurement results
through the use of tables, snapshots, and
formatted reports.

30
Fundamentals
THE GRAPHICAL USER INTERFACE FUNDAMENTALS

The graphical user interface

The user interface offers a menu bar, toolbars, a status bar, and several main dockable panes.

Main Objects Multipiece 3D Scene

Menu bar toolbar inspection toolbar toolbar

Standard
toolbar

Tree
View

3D Scene

Selection
Status bar
toolbar

Menu bar: Access to all the functionalities of IMInspect Probing.

Quick access to common operations such as Open, Save, and
Standard toolbar:
Undo.

Main Objects toolbar: Quick access to the most common tools for an inspection.
Multipiece inspection
Quick access to the various multipiece tools.
toolbar:
Tree View: Pane where all the objects of the project are stored.

3D Scene: 3D rendering window where objects are displayed.

Used to navigate in the 3D scene, to change the view, and to control

3D Scene toolbar:
the visibility and display of objects.

Selection toolbar: Used to select objects or elements in the project.

Provides information and allows changing units, layers, and the

Status bar:
automatic update status.

32
THE GRAPHICAL USER INTERFACE FUNDAMENTALS

The graphical user interface specific for probing

While probing, the user interface offers different probing toolbars, probing status information
and a Digital Readout.
Probing Status Digital Readout

Devices Probing Device Probing Device Probing Control Device Position

toolbar toolbar Control toolbar toolbar toolbar

Devices toolbar: Offers items that allow connecting to the probing device.

Probing Device Offers quick access to set properties of the probing device.
toolbar:

Probing Device Available for specific probing devices such as laser trackers. It
Control toolbar: allows controlling the device.

Probing Control Allows controlling the probing session that is being performed.
toolbar:

Offers quick access to device position-related operations such as

Device Position
defining targets, moving the device and managing device positions
toolbar: and targets.

Probing Status: Displays the progression in capturing points.

Displays real-time information about the position of the probe and

Digital Readout:
information related to the object being probed.

33
USING PROBING PLUG-INS FUNDAMENTALS

Specifying the required probing plug-ins

The plug-ins that will be made available in IMInspect Probing depend on the options set in the
Workspace Manager options. These options are displayed the first time that PolyWorks is
opened. They are also available at any time by following these steps:

1. In the Workspace Manager, choose Tools >

Options. The PolyWorks Workspace Manager
Options dialog box opens.
2. On the Plug-ins page, select the plug-ins that
correspond to the probing devices to use.
3. Click Apply.
4. Start IMInspect Probing.
The options set in the Plug-ins page are automatically saved and are used at the next
module startup.

Connecting to the device

To use a probing plug-in, a connection must first be established with the device. Proceed as
follows:

1. On the Devices toolbar (located in the lower

part of IMInspect Probing), click the down
arrow next to the Connect/Disconnect
button.

2. Choose the device from the drop-down list.

3. Click the Connect/Disconnect button.

The button changes as shown to the right.

34
USING PROBING PLUG-INS FUNDAMENTALS

Probing toolbars
Probing toolbars are displayed in the lower part of IMInspect Probing. They contain tools and
settings to facilitate the probing session. Some toolbars offer different tools and settings
depending on the current device. In this section, only the most common functionalities are
presented. For information on a functionality specific to a device, see the Plug-in Guide of this
device, which is located on the Help menu of the Workspace Manager or the IMInspect
Probing module.

Devices toolbar
The Devices toolbar allows the device connection for data acquisition. It offers the following
standard functionalities:

Connect/Disconnect to Device

Connects to or disconnects from the current probing device.

Scan

Connects to or disconnects from the current scanning device.

Offline Simulation Mode

Activates/deactivates a simulation mode where operations can

be performed without having to be physically connected to the
device

Probing Device toolbar

For articulated arms, the Probing Device toolbar offers the following standard functionalities:

Device Properties

Opens the properties interface of the current probing device.

Tip Diameter
6
Displays the current probe tip diameter.

35
USING PROBING PLUG-INS FUNDAMENTALS

Probing Mode

Sets the probing mode for the current probing device.

Show/Hide Digital Readout

Shows or hides the Digital Readout (DRO).

For laser trackers, the Probing Device toolbar offers additional functionalities:

Device Properties

Opens the properties interface of the current probing

device.

Reflector Name

Sets the reflector used by the current probing device.

Status

Displays the current device status.

Temperature Stability Monitoring

Opens an interface for controlling temperature

stability monitoring.

22C 53% 101.3 kPa Environmental Parameters

Displays the current Air Temperature, Relative

Humidity and Air Pressure provided by the device or
by the user.

36
USING PROBING PLUG-INS FUNDAMENTALS

Probing Device Control toolbar

For laser trackers, the Probing Device Control toolbar allows controlling the device. The
following standard functionalities are offered:

Go Home

Orders the current probing device to move to, or to target, a location called
"Home".

Go Front

Orders the current probing device to move to, or to target, its front.

Go to Object

Orders the current probing device to move to, or to target, the location of
the selected object.

Go to XYZ

Orders the current probing device to move to, or to target, the specified
XYZ coordinates.

Find Target

Orders the current probing device to find a nearby target.

Change Face

Changes the active face of the current probing device.

Orient to Gravity

Measures the inclination of the current probing device in order to orient

new measurements to gravity for the active device position.

37
USING PROBING PLUG-INS FUNDAMENTALS

Probing Control toolbar

The Probing Control toolbar allows controlling the probing session that is being performed. It
offers the following standard functionalities:

Undo Last Probed Point

Removes the last probed point of the current acquisition session.

Reprobe Object

Enables an interactive mode for reprobing the last probed object.

Depending on the connected device, two additional functionalities are offered:

Start or Stop Measurement

Starts or stops a measurement session.

End Probing and Process Probed Data

Ends the current acquisition session and attempts to create a new object
using the probed points.

38
TOOLBAR FUNCTIONALITIES FUNDAMENTALS

Toolbar functionalities
The Probe Measured Components toolbar offers a shortcut to many of the main object-
probing operations. It contains the following tools:

Probe Measured Feature Components

Allows probing the measured component of features.

Add Probed Data Points to Primitives

Allows adding data points by probing the measured primitive of
selected features.

Probe Measured Cross-Section Components

Allows probing the measured component of cross-sections.

Add Probed Data Points to Cross-Sections

Allows adding data points to the selected measured cross-
section component by probing.

Probe Measured Comparison Point Components

Allows probing the measured component of comparison points.

Probe Measured Flush & Gap Gauge Components

Allows probing the measured component of flush & gap gauges.

Probe Measured Profile Gauge Components

Allows probing the measured component of profile gauges.

39
THE GRAPHICAL USER INTERFACE FUNDAMENTALS

Shortcuts through the interface

Shortcuts to different functionalities are offered when right-clicking on elements or areas of
the user interface.

40
MOVING OBJECTS IN THE 3D SCENE FUNDAMENTALS

Moving objects in the 3D scene

The position of objects can be modified in the 3D scene using the mouse. Rotations,
translations, and zoom operations are each mapped to a specific mouse button.

Mouse-based operations:
Rotation
To rotate about the X axis and the Y axis viewing axes, click and hold the left
mouse button inside the 3D scene. To constrain rotations to a vertical or a
horizontal viewing axis, press and hold SHIFT before clicking.

Translation
To translate along the X axis and the Y axis, click and hold the middle mouse
button. Translations along the X axis or the Y axis are performed by moving the
mouse in the X or Y directions respectively, inside the 3D scene.

Zoom
Translating along the Z axis is equivalent to a zoom operation. Click and hold
the right mouse button, then move the mouse forward and backward. When
the mouse is moved forward, a positive translation is performed on the 3D
object, and the scene moves nearer to the user. When the mouse is moved
backward, a negative translation is performed on the 3D object, and the scene
moves farther away from the user.

Zoom box
Zoom on part of an object by delimiting a rectangular area:
1. Press and hold SHIFT.
2. Middle-click to create a first rectangle corner.
3. Drag the pointer to the opposite rectangle corner.
4. Release the middle mouse button.

Rotation about the viewing axis

To rotate about the viewing axis, press and hold SHIFT, click and hold the right
mouse button, then move the mouse in the right or left direction.

Mouse Button Behavior menu button

Note that the same operation can be assigned to all mouse
buttons by selecting a corresponding button on the
Mouse Button Behavior menu button, available on the
3D Scene toolbar.

41
OBJECTS AND THEIR ELEMENTS FUNDAMENTALS

An object-based approach
IMInspect Probing offers an object-oriented approach to measurement and analysis tasks.
Inspection projects describe the list of objects imported and created within IMInspect Probing,
and they preserve editing operations performed by users. Several categories of objects can be
generated within an inspection project. They are described in the subsections that follow.

Objects and their elements

Objects are items found in the Tree View, such as Data and Reference objects. They are made
up of elements, like data points in a point cloud, or surfaces in a CAD model. Both entire
objects and specific elements can be considered for analysis during inspection.

Module Objects Elements

point cloud data points

IMInspect Probing polygonal model triangles
CAD model CAD surfaces
There are two selection tools,
one for objects and one for
elements.

A point cloud contains data points.

A polygonal model contains triangles.

A CAD model contains CAD surfaces.

42
OBJECTS AND THEIR ELEMENTS FUNDAMENTALS

As shown below, the list of objects is available in the Tree View.

Reference object
Tools > Reference Objects

Data object
Tools > Data Objects

Data alignment
Align

Data color map

Measure > Deviations of Data Objects

Feature
Measure > Features

Cross-section
Measure > Cross-Sections

Comparison point
Measure > Comparison Points

Gauge
Measure > Gauges

Measurement
Measure > Interactive Measurements >
Basic

Reference target
Measure > Reference Targets

Coordinate system
Tools > Coordinate Systems

Report
Report

43
SELECTING OBJECTS AND ELEMENTS FUNDAMENTALS

Selecting objects
Objects can be selected in the Tree View or in the 3D scene by using
the Select Objects Interactively tool. Object selection is needed in
order to apply operations to specific objects.

Objective: Select an object interactively in the 3D scene.

Required: The project contains a Reference or a Data object.

Steps

1. Choose Select > Objects > Interactively.

Alternatively, press CTRL + SHIFT + SPACEBAR to
enable the object selection mode.

2. Pick objects in the 3D scene.

3. Press and hold CTRL to select additional IMBlock.pqk
objects.

4. Press the Select Objects Interactively button

to exit the object selection mode.

Results

The selected object is highlighted in the

Tree View.

44
SELECTING OBJECTS AND ELEMENTS FUNDAMENTALS

Notes

Hold CTRL + SHIFT + middle-click while

dragging to create a rectangular selection
zone. The objects within the zone are selected.

Additional object selection tools are available on the Select > Objects menu, including Select >
Objects > All, Select > Objects > None, and Select > Objects > Invert.

Selecting elements
It is possible to select a single element or groups of elements, either on the nearest surface or
volumetrically (through the dataset). Element selection is needed in order to apply operations
to specific elements.

The Select Elements dialog box used to select elements is

available through Select > Elements > Interactively.

Selection tools
In the Select Elements dialog box, five selection tools are
available:

Multiple
Different selection tools can be accessed depending on the mouse button and the
quick access key used:
Brush: Left-click
Freeform Contour: Middle-click + hold
Polygonal Contour: Middle-click + CTRL key

Brush
Used to perform element selection in the 3D scene by dragging the mouse over the
object. Elements within the area defined by the brush tip are selected once the
mouse is released.

45
SELECTING OBJECTS AND ELEMENTS FUNDAMENTALS

Freeform Contour
Used to perform element selection in the 3D scene by dragging the mouse over the
object and defining a free-form contour. Elements within the area defined by the
contour are selected.

Polygonal Contour
Used to perform element selection in the 3D scene by left-clicking to anchor a
polygonal outline until a polygonal contour has been formed. The contour is closed
by left-clicking near the end of the initial line or by simply right-clicking to add a
final point. Elements within the area defined by the contour are selected.

Single Element
Used to perform single element selection in the 3D scene by left-clicking the
element. The type of element selected depends on the object type.

Selection modes
In the Select Elements dialog box, three Selection Modes are available:

Select
Selects elements.

Deselect
Deselects elements. Hold the ALT key as a shortcut.

Toggle
Inverts element selection status. It can be used to select elements or deselect
elements that have already been selected.

Selection types
In the Select Elements dialog box, two Selection Types are available:

Surface
Element selection is performed on the visible surfaces of the object.

Volumetric
Element selection continues through the object, including elements behind the
visible surfaces.

46
SELECTING OBJECTS AND ELEMENTS FUNDAMENTALS

Selectable faces
In the Select Elements dialog box, three Selectable Faces can be used to control which
elements are selected:

Front
Selects only elements that are facing up in the 3D scene.

Back
Selects only elements that are facing down in the 3D scene.

Front and Back

Selects elements regardless of orientation.

Global element selection

In the Select Elements dialog box, three buttons give quick access to the global element
selection operations that are available:

All
Selects all elements.

Invert
Inverts the selection of all elements.

None
Deselects all elements.

Notes

Element selection operations are also available through the Select > Elements menu.

47
SELECTING OBJECTS AND ELEMENTS FUNDAMENTALS

Selecting elements using the Brush tool

Objective: Select multiple elements on the Reference or Data object with the brush tool.

Required: The project contains a Reference or Data object with selectable elements.

Steps

1. Choose Select > Elements > Interactively, or press

SPACEBAR to enable the interactive element
selection mode.
The Select Elements dialog box opens.

2. Select the Brush selection tool

3. In the 3D scene, hold the left mouse button

while dragging the mouse over the object to
select all elements within the brush stroke, such
as:
CAD model surfaces.

Polygonal model triangles.

Probed data points.

It is possible to switch to the Deselect mode by

holding the ALT key and performing the same
action.

4. Press ESC or SPACEBAR to exit the selection

mode and close the Select Elements dialog box.

48
SELECTING OBJECTS AND ELEMENTS FUNDAMENTALS

Results

The selected elements are highlighted in red in

the 3D scene.

Since the selection was performed using the

Surface selection type, none of the elements
behind the visible surfaces were selected.

Probed data points have no surface information,

so the selection type automatically changes to
Volumetric when it is detected that the selection
is being performed on probed data points.

Notes

The Volumetric selection type continues

through the object, including elements
behind the visible surfaces.

In the More section, it is possible to change

the shape of the brush tip to Square.
The brush tip can be resized interactively in
the 3D scene by scrolling the mouse wheel.

49
SELECTING OBJECTS AND ELEMENTS FUNDAMENTALS

Selecting elements using the Freeform Contour tool

Objective: Select multiple elements on a Reference or Data object by defining a freeform
contour.

Required: The project contains a Reference or Data object with selectable elements.

Steps

1. Choose Select > Elements > Interactively, or press

SPACEBAR to enable the interactive element
selection mode.
The Select Elements dialog box opens.

2. Select the Freeform Contour selection tool.

3. In the 3D scene, hold the left mouse button

while dragging the mouse over the object to
select elements such as:
CAD surfaces.

Polygonal model triangles.

Probed data points.

It is possible to switch to the Deselect mode by
holding the ALT key and performing the same
action.
4. Press ESC or SPACEBAR to exit the selection
mode and to close the Select Elements dialog
box.

Results

The selected elements are highlighted in red in

the 3D scene.

50
SELECTING OBJECTS AND ELEMENTS FUNDAMENTALS

Since the selection was performed using the

Surface selection type, none of the elements
behind the visible surfaces were selected.

Probed data points have no surface information,

so the selection type changes to Volumetric
automatically when it is detected that the
selection is being performed on probed data
points.

Notes

To perform a selection with a polygonal

contour, select the Polygonal Contour
selection tool. Left-click to anchor corners
of the polygonal outline; to close the
contour, left-click near the end of the initial
line or simply right-click to add the last
point.

The Volumetric selection type continues

through the object, including elements
behind the visible surfaces.

51
SELECTING OBJECTS AND ELEMENTS FUNDAMENTALS

Selecting a single element

Objective: Select a single element on a Reference or Data object.

Required: The project contains a Reference or Data object.

Steps

1. Choose Select > Elements > Interactively, or press

SPACEBAR to enable the interactive element
selection mode.
The Select Elements dialog box opens.
2. Select the Single Element selection tool.

3. In the 3D scene, left-click on:

a CAD surface to select it.

a polygonal model to select the nearest

triangle.

a point cloud to select the nearest data

point. Place the cursor close to a data point
and left-click to select it.

4. Press ESC or SPACEBAR to exit the selection

mode and to close the Select Elements dialog
box.

Results

The selected surface triangle or data point is

highlighted in red in the 3D scene.

52
Reference objects
INTRODUCING REFERENCE OBJECTS REFERENCE OBJECTS

Introducing Reference objects

Reference objects are the nominal objects (typically a CAD model or a polygonal model) to
which the Data objects are measured.

Categories of Reference objects

There are two categories of Reference objects. The following table presents each category:

Icon Type Description

CAD Reference objects All imported CAD formats.

Polygonal Reference Polygonal models.

objects

Once a Reference object is imported, it is displayed in the

Tree View, under the Reference branch.

Assigning tolerances
Tolerances are automatically assigned to Reference objects. A tolerance is useful for obtaining
pass/fail inspection results. For example, when a data point is no farther from the surface
than a given tolerance value, the point passes the tolerance test. If the data point is farther
from the surface than the same tolerance value, the point fails the tolerance test. See
Assigning tolerances to Reference objects on page 59.

54
IMPORT CAD MODELS REFERENCE OBJECTS

Using CAD models to describe nominal parts

It is common practice, in the industry, to design the shape of
parts using 3D drawing software, commonly known as
computer-aided design (CAD) software. CAD models greatly
simplify the task of defining nominal geometries and dimen-
sions, an essential step in the process of inspecting parts.

Importing a CAD model

Objective: Import a CAD model into the inspection project as a Reference object.

Required: A CAD file in a neutral format (IGES or STEP file) or a native format (such as CATIA,
NX, Creo, SolidWorks, or Inventor).

Steps

1. Choose File > Import > CAD Models.

A file browser opens.

2. Browse for the CAD file and select it.

3. Click Open.

Results

The CAD model is added to the Tree View, The CAD model is displayed in the 3D scene.
under the Reference branch.

55
IMPORT CAD MODELS REFERENCE OBJECTS

Importing Product and Manufacturing Information (PMI) with the

CAD model
Some computer-assisted design platforms have the capability to add geometric dimensioning
and tolerancing controls to the model in order to have this information embedded in the file.
Depending on the CAD file format, the import options may include extracting features and
their feature control frames, allowing to import the model with the GD&T control information.
The import options are offered on the CAD Models page of the IMInspect Options.

Objective: Import a CAD model with embedded GD&T control information.

Required: CAD model with embedded GD&T controls in a format such as CATIA V5 and V6,
Creo, JT, NX, SAT or SolidWorks.

Steps

1. Choose Tools > Options.

The IMInspect Options dialog box opens.

2. Open the Objects > Reference/Data >

CAD Models > [choose a file format]
page.
3. For each required CAD file format, select
Import features and controls.
4. Click OK.

5. Choose File > Import > CAD Models.

A file browser opens.

6. Browse for the CAD file and select it.

7. Click Open.

56
IMPORT CAD MODELS REFERENCE OBJECTS

Results

The CAD model is imported with the GD&T The CAD model is displayed in the 3D scene
controls and the nominal feature compo- along with the features.
nents are created automatically.

Notes

A CAD translator is required to read the native CAD file formats.

The Features and Controls Import Log is added to the Tree View, under the Reports branch.
This provides information about the operations done by PolyWorks during the import
process.

57
IMPORT POLYGONAL MODELS REFERENCE OBJECTS

Using polygonal models to describe nominal parts

Polygonal models are meshes composed of triangles and vertices
which are the result of a merging process of the data points
acquired by a scanning device. Polygonal models are imported as
Reference objects. For example, the original model can be
imported as a Reference object to monitor wear on a part over
time.

Objective: Import a polygonal model as a Reference object.

Required: A polygonal model file in a PolyWorks format (such as POL or PQK), or a neutral
format (such as STL or OBJ).

Steps

1. Choose File > Import > Polygonal

Models.

2. Browse for the file to import.

Common polygonal file formats include
.pol, .pqk, .stl, .obj, and .ply.
3. In the Object Units list, select the
native units of the file, then click OK.

Results

The polygonal model is now added to the The polygonal model is displayed in the 3D
Tree View, under the Reference branch. scene.

58
ASSIGNING TOLERANCES REFERENCE OBJECTS

Assigning tolerances to Reference objects

Tolerances, assigned to Reference objects, define upper and
lower envelopes used by measurement tools to determine if a
measured value is within tolerance (pass) or out of tolerance
(fail). Tolerances can be assigned to the entire Reference object
at once, or to individual surfaces or areas.

The examples shown in the following subsections use a CAD

model. Note that the procedure is applicable to any type of
Reference object.

Assigning tolerances to the entire Reference object

Objective: Assign tolerances to all the surfaces of the CAD model.

Required: A CAD file, imported as a Reference object.

Steps

1. Select the CAD model in the Tree View.

2. Choose Tools > Reference Objects >

Tolerances.
The Edit Reference/Primitive Tolerances
dialog box opens.

By default, all the CAD surfaces are assigned a

tolerance of +/- 0.5 mm, which is shown in
green.

3. Enter a new value to modify the tolerance.

59
ASSIGNING TOLERANCES REFERENCE OBJECTS

Assigning tolerances to specific surfaces

Objective: Assign tolerances to specific surfaces of the CAD model.

Required: A CAD file, imported as a Reference object.

Steps

1. Choose Select > Elements > Interactively to

enable an interactive picking mode.

2. Left-click the CAD surfaces where a different

tolerance must be assigned.

3. Choose Tools > Reference Objects >

Tolerances.
The Edit Reference/Primitive Tolerances
dialog box opens.

4. In the dialog box, click Add to create a new

tolerance.

5. Enter the values for the new tolerance.

6. Click Assign to Selected CAD surfaces.

Results

A new tolerance is added and is assigned to

the selected CAD surfaces.

60
Data objects
INTRODUCING DATA OBJECTS DATA OBJECTS

Introducing Data objects

Data objects in a typical inspection process represent the objects to be inspected. They are
created within IMInspect Probing as a result of probing physical objects.

Categories of Data objects

There are three types of Data objects covered in this guide. The following table presents each
type:

Icon Type Description

Surface Data objects Point Clouds obtained by probing.

(with normals)
Surface Data objects
(without normals)

Boundary Data objects Boundary Point Clouds obtained by probing1.

(with normals)
Boundary Data objects
(without normals)

Probed Data objects Data points obtained when:

(with normals)
Probing measurement objects (i.e., features,
Probed Data objects comparison points, cross-sections, and
(without normals) gauges).
Performing a surface point alignment.

1. Without normal information.

Data objects are displayed in the Tree View, under the Data
branch.

62
PROBING A PART DATA OBJECTS

Probing a part using a probing device plug-in

IMInspect Probing has the capability to use a probing
device directly within its user interface to digitize parts.
Probing devices include equipment such as laser trackers
and articulated arms. Point clouds can be probed on the
part surface, or along its boundaries. The point
coordinates (x, y, z) and optionally, for arms, the normals
(i, j, k) are stored in the current probing session in the Tree
View, as either probed surface or probed boundary Data
objects.

Using the probing device to collect surface points

A probing device can be used to collect a point cloud on the part. The data points are stored in
the current probing session as a probed surface Data object containing the x, y, z point
coordinates of each probed point. If the probing device is aligned to the Reference object, the
points can be compensated toward the closest surface. If the probe tip has an orientation,
that orientation can be used to assign point normals.

Objective: Probe the surfaces of a part using a plug-in to obtain a point cloud directly in
IMInspect Probing.

Required: A probing device is available and ready to use, and the required plug-in is loaded
in IMInspect Probing. A CAD model is loaded for point compensation, and the
device is aligned to it.

Steps

1. Choose Tools > Data Objects > Probe Surface

Point Clouds.
The Probe Surface Point Clouds dialog box
opens.

2. Select Compensation and specify the Use

Reference Object method.
The probed points are translated by the probe
radius toward the nearest Reference surface.
3. If it is possible to keep the probe tip orthogonal
to the part, and the tip has an orientation (is not
only a reflector), point normals can be assigned
by selecting Store normal vectors.
4. Click Probe and acquire data points on the part.

63
PROBING A PART DATA OBJECTS

Results

A probed Data object is added to the Tree The point cloud is displayed in the 3D scene.
View. All probed points are added to one
Data object.

Notes

Many probing modes are available when probing,

the most common being:
The Single (or Stationary) mode collects one
point each time the device is triggered.
The Continuous Time mode collects a series of
points when the device is triggered, at equal
time increments.
The Continuous Distance mode collects a
series of points when the device is triggered, at
equal distance increments.

The increment values can be edited on the Probing Device > Measurement Mode page of
the IMInspect options dialog box. The IMInspect options are available by choosing Tools >
Options.

64
PROBING A PART DATA OBJECTS

Using the probing device to collect boundary points

A probing device can be used to collect a point cloud on the part edges only, creating a
boundary point cloud. This method can be used to measure the perimeter shape of a piece of
sheet metal or a thin-walled part. Either the probe tip or shank can be used.

Objective: Probe the surfaces of a part using a plug-in to obtain a point cloud directly in
IMInspect Probing.

Required: A probing device is available and ready to use, and the required plug-in is loaded
in IMInspect Probing. A CAD file is loaded for point compensation, and the device
is aligned to it.

Steps

1. Choose Tools > Data Objects > Probe Boundary

Point Clouds.
The Probe Boundary Point Clouds dialog box
opens.

2. In the Reference object list, select (Closest) to

use the closest Reference object, or specify an
existing Reference object.
3. Select the Project points using closest
surface comparison point parameter to offset
the probed boundary data points by the
amount of the deviation along the normal of
the closest comparison point.
4. If the shank of the probing device is calibrated,
the shank can be used for probing rather than
the probe tip by selecting Use shank.
5. Click Probe.

Results

A probed Data object is added to the Tree The probed boundary point cloud is
View. All probed points are added to one displayed in the 3D scene.
Data object.

65
PROBING A PART DATA OBJECTS

Notes

Many probing modes are available when probing,

the most common being:
The Single (or Stationary) mode collects one
point each time the device is triggered.
The Continuous Time mode collects a series of
points when the device is triggered, at equal
time increments.
The Continuous Distance mode collects a
series of points when the device is triggered, at
equal distance increments.

The increment values can be edited on the Probing Device > Measurement Mode page of
the IMInspect options dialog box. The IMInspect Options are available by choosing Tools >
Options.

66
NEW PROBING SESSION DATA OBJECTS

Creating a new probing session

It is possible to have multiple probing sessions within the same project. For example, it can be
useful to separate data points that will define the measured component of specific features,
or simply to separate data points of a probed surface point cloud from the rest of the probed
data points.

Objective: Create a new probing session to probe a surface point cloud.

Required: A probing device is available and ready to use, and the required plug-in is loaded
in IMInspect Probing. A CAD model is loaded for point compensation, and the
device is aligned to it.

Steps

1. Choose Tools > Data Objects > New Probing

Session.
All future point acquisitions will be included in a
new probing session.

2. Choose Tools > Data Objects > Probe Surface

Point Clouds.

Results

A new probed Data object is added to the

Tree View.

67
Align
ALIGNMENTS ALIGN

Introducing alignments
An alignment is an object transformation operation that changes the position and orientation
of a Data object to bring it into the coordinate system of a Reference object.
Reference object Data object

Before alignment After alignment

IMInspect Probing offers a variety of alignment tools to meet a wide variety of scenarios. Each
alignment is represented in the Tree View as a data alignment.

Alignments are available on the Align menu or on the Alignments toolbar.

Alignment tools
Here is a list of common tools offered by IMInspect Probing that are used to align Data objects
to Reference objects:

Alignment using features:

Plane, Axis, Center Point Center Points

Perpendicular Planes

Alignment using reference targets:

Reference Targets by Probing

Alignment due to GD&T-specified datum frames:

Datum Reference Frames Datum Reference Frames by Probing

Alignment to align the probing device to the Reference object:

Surface Points

69
DATA ALIGNMENTS ALIGN

Introducing data alignments

Each transformation of a Data object is automatically recorded in the Tree View as a data
alignment. While the latest data alignment is usually the active data alignment, a previous
data alignment can be activated manually. This may be useful to examine inspection results
using a variety of alignments.

Each data alignment is stored chronologically within an

alignment group. The data alignment on object creation
is called original. Data alignments within an alignment
group form an alignment history. The name of each data
alignment recalls the type of alignment performed.

The active data alignment, often the last one, is shown in

bold. Any data alignment can be activated, and project
contents are updated automatically. Unnecessary data
alignments can be deleted.

Data objects with the same transformations can be contained within the same alignment
group, whereas Data objects requiring different alignments are automatically placed in a
separate alignment group. The latter case is common for assemblies of multiple Data objects.
An alignment performed on any Data object applies to all the Data objects.

The creation of alignment groups and data alignments is automatically managed by IMInspect
Probing.

Activating a data alignment

An alignment group can contain multiple data alignments, such as the original alignment and
a feature-based alignment. It is possible to activate any alignment in an alignment group and
results are automatically updated.

Objective: Activate a previous data alignment in an alignment group.

Required: A Data object with at least two data alignments present in an alignment group.

70
DATA ALIGNMENTS ALIGN

Steps

Here, there are two data alignments:

original and plane, axis, center point 1.
The plane, axis, center point 1 alignment is
currently the active alignment and is
shown in bold.

1. Select a data alignment in the Tree View

and choose Align > Data Alignments >
Activate.
Alternatively, right-click the selection and
choose Activate.
Measurement objects and results are
updated automatically.

Results

The selected data alignment is activated and The Data objects are transformed by the new
shown in bold in the Tree View. active data alignment.

Notes

When a data alignment is performed incorrectly, it is best to

delete it immediately. First, activate the previous data
alignment, then select the last data alignment in the
alignment group, and choose Edit > Delete > Objects. Deleting
an intermediate data alignment may have an effect on
subsequent data alignments.

71
SURFACE POINTS ALIGNMENT ALIGN

Aligning by probing surface points

The Surface Points alignment method allows aligning probed points to the same locations on
Reference objects. This prealignment tool greatly facilitates visualization and guidance for
subsequent operations.

Objective: Align by probing surface points.

Required: A Reference object, a physical part, and a probing device.

Steps

1. Choose Align > Surface Points.

The Create Surface Points dialog box opens.

2. In the Method list, specify Anchor.

3. Click Anchor.

4. Anchor six points on the Reference object to

use for the alignment.
All six degrees of freedom should be constrained
using a 3-2-1 alignment method, where the
alignment direction of three surface points is
along one reference axis (X axis), the alignment
direction of two other surface points is along a
second reference axis (Y axis), and the alignment
direction of the last surface point is along the
remaining reference axis (Z axis). If all the degrees
of freedom are not constrained, then only a final
N Point Pairs alignment is performed.
The anchored points are listed in the Align Surface
Points pane. A radial tolerance determines how
closely the probed point must match the reference
location.

5. If a probing device is connected, the probing

dialog box opens automatically. Otherwise,
click Probe Source Points in the pane.

6. On the physical part, probe the same six points

using the same order.
As the points are probed, the probing device is
more closely aligned to the Reference object,
providing increasing visual context.

72
SURFACE POINTS ALIGNMENT ALIGN

7. If the probed points are not precise enough to

fall within the radial tolerance of the reference
location, a message box offers to reprobe the
points that are out of tolerance.
Visual and audio guidance are provided to
remeasure those points. The points can be
reprobed in any order.

Results

The new data alignment is added to the The probed data points are aligned to the
alignment group of the Data object. same locations on the Reference object.

73
FEATURE-BASED ALIGNMENTS ALIGN

Aligning with features

The approach consists in creating features whose nominal primitives are created on the
Reference object, and whose measured primitives are probed on the actual part. Then, the
measured primitives are aligned to the nominal primitives, transforming the position and the
in-space orientation of the acquired data, including the linked objects.

There are several feature-based alignment methods:

Plane, Axis, Center Point

Center Points

Perpendicular Planes

Alternatively, the Plane, Axis, Center Point and the Perpendicular Planes methods can also
align the acquired data to standard axes. The probed measured primitives are aligned to
standard planes, standard axes, and a coordinate along the axes.

Distinct characteristics of planar features, direction-based features, and center-point-based

features allow using them for alignment methods:

Planar features: planes, circles, arcs, ellipses, polygons, rectangles, slots, and slabs.
Direction-based features: circles, arcs, cones, cylinders, ellipses, polygons, rectangles,
slots, and lines, but not planes.
Center-point-based features: circles, arcs, ellipses, points, polygons, rectangles, slots,
and spheres. They are also called point-reducible features.

74
PLANE, AXIS, CENTER POINT ALIGNMENT ALIGN

Aligning using a plane-axis-point approach

The Plane, Axis, Center Point alignment method allows aligning Data objects to Reference
objects using pairs of planar, direction-based, and center-point-based features. Generally, the
measured component of a feature is assigned as the source object while its nominal
component is assigned as the destination object.

Objective: Align a Data object to a Reference object using a Plane, Axis, Center Point
alignment.

Required: The project contains a Data object and a Reference object, as well as a planar
feature, a direction-based feature (except planes), and a center-point-based
feature, each containing a nominal and a measured component.

Steps

1. Choose Align > Feature-Based > Plane, Axis,

Center Point.
The Align Plane, Axis, Center Point dialog box
opens.

2. In the Sequence list, select Plane, Axis, Center

Point.

3. Specify a planar feature, a direction-based

feature, and a center-point-based feature that
will be used for the alignment.
The Source object is the measured feature
component, while the Destination is the nominal
feature component. The measured components
are moved to the nominal locations.
Click the Pick button to the right of each list box
to pick the source and destination objects directly
in the 3D scene.

4. Click Confirm.

75
PLANE, AXIS, CENTER POINT ALIGNMENT ALIGN

Results

The new data alignment is added to the The Data object is aligned to the Reference
alignment group of the Data object. object using the features.

Notes

If no nominal feature component has been defined, standard system planes, axes, and
coordinates can be specified in the Destination list box.
Sometimes, a partial alignment can be performed. If only one or two features are used for
the alignment, the remaining parameters can be left blank. Make sure that the Sequence
chosen begins with the type of feature used for the partial alignment.

76
CENTER POINTS ALIGNMENT ALIGN

Aligning using center points

The Center Points alignment method aligns a Data object to a Reference object by matching
three or more pairs of point-reducible features. A point-reducible feature is a feature with a
center point, like a circle, a slot, or a sphere.

Objective: Align a Data object to a Reference object using a Center Points alignment.

Required: A Data object, a Reference object, and three or more pairs of point-reducible
features that each have a nominal and a measured component.

Steps

1. Select the features in the Tree View.

2. Choose Align > Feature-Based > Center Points.

The Align Center Points dialog box opens.
Preselected point-reducible features are
automatically populated in the Source and
Destination lists.
If the selected features contain both nominal and
measured components, the measured component
is assigned as the Source, and the nominal
component is assigned as the Destination.
If the alignment is not to be done between
nominal and measured component pairs,
manually select Source and Destination
components.

3. To add features, manually select the desired

features from the Source and Destination lists
in the empty Pair # row.
At least three pairs are required for a complete
alignment.
Remove point pairs, if desired, by clearing the
corresponding Pair # check box.

4. Click Align.

77
CENTER POINTS ALIGNMENT ALIGN

Results

The new data alignment is added to the The Data object is aligned to the Reference
alignment group of the Data object. object using center points.

Notes

To restrict alignment translations or rotations, or both, using a feature or a standard axis,

select Use constraints.
If needed, select Scale to minimize 3D deviations to allow scaling the Data object to get a
better match to the Reference object. For example, this may be useful when taking into
account temperature deviations.
Generate a report table from the alignment to analyze the deviations between each pair of
points. Right-click the data alignment in the Tree View and click Report.

78
PERPENDICULAR PLANES ALIGNMENT ALIGN

Aligning using perpendicular planes

The Perpendicular Planes alignment method aligns the Data
object to the Reference object by matching three plane features.
The planes must intersect each other in space.

Objective: Align a Data object to a Reference object using a

Perpendicular Planes alignment.

Required: A Reference object, a Data object and three

perpendicular plane features with nominal and
measured components.

Steps

1. Choose Align > Feature-Based > Perpendicular

Planes.
The Align Perpendicular Planes dialog box
opens.

2. In the lists, select the planes that will be used

for the alignment. The measured components
should be in the Source column.

When a measured component is selected in the

Source column, the corresponding nominal
component is automatically specified in the
Destination list. The user can select another
component in the Destination list, if desired.
The order in which planes are specified is
important. The first plane is the primary plane
and has precedence over the second and third
planes when aligning.
3. Click Align, then click Done.

79
PERPENDICULAR PLANES ALIGNMENT ALIGN

Results

The new data alignment is added to the The Data object is aligned to the Reference
alignment group of the Data object. object using three perpendicular planes.

Notes

When no Destination components exist, the

alignment can be performed using planes
obtained from standard axes and positions.

80
USING REFERENCE TARGETS ALIGN

Aligning with reference targets

Reference targets are points or lines that can be used to
constrain an alignment along a specified direction. These are
commonly found in sheet metal part drawings as well as
molds and die drawings, where specific coordinates on the
part are established and directions along the standard axes
are defined to align the part.

Typically, reference targets are created on the Reference

object. Once they are in the desired position, a reference
target alignment can be performed.

Introducing reference targets

There are two types of reference targets: points and lines.

Reference target points

They are positioned at precise
coordinates, and align the Data
object along the alignment direc-
tions.

Reference target lines

They are created from line
features, and constrain the
alignment along a pin or shank
edge.

81
USING REFERENCE TARGETS ALIGN

There are three subtypes of reference target points: surface, feature, and cross-section.

Surface reference target points

They are positioned at precise

coordinates on Reference object
surfaces. When performing the
alignment, the distance of the
measured point on the Data
object to the target is minimized
according to the specified
alignment directions.

Feature reference target

points

They are created from precise

coordinates of the Reference
object, and are associated with
individual features, such as a
circle, a slot, or a plane. When
performing the alignment, the
distance to the feature is
minimized according to the
specified alignment directions.

Cross-section reference target

points

They are positioned at precise

coordinates on Reference object
surfaces, and are associated with
cross-sections. When performing
the alignment, the distance of a
measured point on the cross-
section to the target is
minimized.

82
USING REFERENCE TARGETS ALIGN

Creating reference target points

Creating surface reference target points

Objective: Create surface reference target points using specific coordinates on the part.

Required: A Reference object, and coordinates for target locations.

Steps

1. Choose Measure > Reference Targets > Create >

Surface Points.
The Create Surface Reference Target Points
dialog box opens.

2. In the Method list, select Numerically to

specify coordinates.
3. Use the coordinates provided on the part
drawing to define the target Point location.
The target can be projected onto the Reference
object surface along an axis. Instead of entering
the third coordinate, select Project and choose
the projection axis.

4. Set the Normal direction of the point. If the

Automatic option is enabled, the normal
direction of the surface point is calculated
automatically from the surface normal of the
Reference object.
5. Set the Alignment direction of the target
point. It can be set to Automatic, Point
Normal, +X, -X, +Y, -Y, +Z, -Z, or XYZ direction.
6. Click Create.

83
USING REFERENCE TARGETS ALIGN

Results

The new surface reference targets are added The reference targets are displayed in the
to the Tree View, under the Reference Targets 3D scene.
branch.
surf target pt 3 surf target pt 1

surf target pt 2

Notes

The surface reference targets can be set as datum targets and be used as part of a Datum
Reference Frame of a GD&T control. For more information on datum targets, see Defining
datum targets on page 329.

Creating feature reference target points

Objective: Create feature reference target points using features on the part.

Required: The part must have measurable features and the project contains a Reference
object.

Steps

1. Choose Measure > Reference Targets > Create >

Feature Points.
The Create Feature Reference Target Points
dialog box opens.

84
USING REFERENCE TARGETS ALIGN

2. In the Method list, select From Feature

Creation to create a new feature for the
reference target.

3. Choose a Feature type, such as a circle feature.

4. In the Alignment directions list, specify the

directions to be constrained by the feature.
It can be any combination of X, Y, and Z.

5. Click Create.
The feature creation dialog box opens.

6. In the Method list, select a feature creation

method, such as Pick on CAD Model.

7. Click Pick.

8. In the 3D scene, pick the feature on the CAD

model.

Result

The new feature reference targets and their The feature reference targets are displayed in
associated features are added to the Tree the 3D scene.
View.

ftr target pt 2
ftr target pt 3
ftr target pt 1

85
USING REFERENCE TARGETS ALIGN

Aligning using reference targets

Reference targets can be used in a reference target alignment. A combination of surface and
feature reference targets can be used for the alignment of Data objects.

Surface reference target points can be used as datum targets for use in Datum Reference
Frame alignments (see Defining datum targets on page 329).

Align using surface and feature reference targets by probing

Objective: Align the Data object to the Reference object by probing using reference targets.

Required: A Reference object, a physical part, surface or feature reference target points, and
a probing device.

Steps

1. In the Tree View, select the reference target

points.

2. Choose Align > Reference Targets > Align by

Probing.
The Align Reference Targets by Probing pane
opens.

3. The selected reference target points are listed

in the pane.

4. Click the Probe Measured button.

86
USING REFERENCE TARGETS ALIGN

5. Probe the surface reference targets points and

features associated to the feature reference
target points, as guided.

Results

The new data alignment is added to the Tree The Data object is aligned to the Reference
View. The reference targets and the features object using reference target points.
associated to the feature reference targets
are measured.

87
USING REFERENCE TARGETS ALIGN

Notes

For point features, a radial tolerance is used; it is possible to reprobe points that are out of
the radial tolerance.
The feature type can be specified in the Align Reference Targets by Probing pane if not
already linked to a feature.

88
USING DATUM REFERENCE FRAMES ALIGN

Aligning with Datum Reference Frames

A Datum Reference Frame (DRF) is a referential that serves to
orient and locate objects in space. A DRF can be composed of
datum features with nominal and measured primitives. The
DRF alignment aligns Data objects (using the measured
primitives) to Reference objects (using the nominal primi-
tives). It can also be composed of datum targets. A DRF used
by a Geometric Dimensioning and Tolerancing (GD&T) control
serves to orient and locate tolerance zones.

Align using a Datum Reference Frame

Objective: Align the probed Data object to the Reference object using a DRF.

Required: The IMInspect project contains a probed Data object and a Reference object, as
well as datum features and/or datum targets, each containing a nominal and a
measured component.

Steps

1. Choose Align > Datum Reference Frame.

The Align Datum Reference Frame dialog box
opens.

2. Choose an existing DRF from the list.

DRFs used in any GD&T control are listed
automatically.

3. To add a new DRF, under Creation, select

datum features using the lists.

4. Click Create.
The new DRF is added to the Datum reference
frames list.

5. Select a DRF in the list, then click Align.

To be used in a DRF, a feature must have a datum

feature label. The datum feature label can be
specified on the Feature tab of a features
property sheet.

89
USING DATUM REFERENCE FRAMES ALIGN

To be used in a DRF, a reference target must have

a datum target label. The datum target label can
be specified on the Reference target tab of a
reference target's property sheet.

Results

The new data alignment is added to the The Data object is aligned to the Reference
alignment group of the Data object. object using the datum features.

Notes

When datum features are specified in a GD&T control, the Datum Reference Frame alignment
is applied virtually for the calculation the Data object does not need to be actually aligned to
the Reference object. However, the alignment used by a GD&T control can be visualized using
the Feature Navigator tool.

90
USING DATUM REFERENCE FRAMES ALIGN

Align a Datum Reference Frame by probing

Objective: Align the Data object to the Reference object by probing the datum features and
the datum targets linked to a Datum Reference Frame.

Required: The IMInspect project contains a Data object and a Reference object, as well as
datum features and/or datum targets.

Steps

1. Choose Align > Datum Reference Frame > Align

by Probing.
The Align Datum Reference Frame by Probing
pane opens.

2. Choose an existing DRF from the drop-down

list.
DRFs used in any GD&T control are listed
automatically.
3. To add a new DRF, click on the Create Datum
Reference Frame button located next to the
drop-down list.
4. The involved datum features and datum targets
are listed in the pane.

5. Click the Probe Measured button.

6. Probe the features and targets, as guided.

The order in which the datums are probed is
based on their order in the Datum Reference
Frame.

91
USING DATUM REFERENCE FRAMES ALIGN

Results

The new data alignment is added to the The Data object is aligned to the Reference
alignment group of the Data object. The object using the A B C Datum Reference
datum features and datum targets are Frame.
measured.

Notes

For datum target points, a radial tolerance is used; it is possible to reprobe points that are
out of the radial tolerance.

92
Coordinate systems

93
COORDINATE SYSTEMS ALIGN

Introducing coordinate systems

A coordinate system describes the origin and orientation of an inspection project.

Three types of coordinate systems are supported by IMInspect Probing:

Cartesian
Cylindrical
Spherical

IMInspect Probing projects come with a default coordinate system called world. It
corresponds to the standard Cartesian coordinate system (x, y, z), whose origin is located at 0,
0, 0.

Multiple coordinate systems are useful for users who need to work in a specific frame of
reference for the purpose of visualizing and reporting information. New coordinate systems
can be created. They appear under the Coordinate Systems branch of the Tree View, and are
represented in the 3D scene as an origin and three axes. Only one coordinate system can be
active at a time.

In the 3D scene
The active coordinate system is displayed using red,
green, and blue for the X, Y, and Z axes respectively.
The world coordinate system is easily identifiable since
it has a gray cube at its origin.

Coordinate systems that are not active are displayed in

gray.

Using a new coordinate system

When a coordinate system is activated, the following occurs:

All objects are represented in the new coordinate system, regardless of their status.
All measurement results are transformed in order to be aligned in the new coordinate
system. Measurement results remain valid.
The numerical values of object properties related to location and orientation are
expressed in the active coordinate system. Default values, for example in the object
creation dialog boxes, do not change.
Objects are exported in the active coordinate system.

94
COORDINATE SYSTEMS ALIGN

The bounding box of the 3D scene is recalculated. This can influence the creation of
certain primitives, like a plane primitive created numerically, or certain dependent
primitives that are created using the bounding box.

Understanding the coordinates of a point

Cartesian coordinates of a point are represented by x, y
and z values based on three mutually perpendicular X,
Y, Z axes.

The cylindrical coordinates of a (x, y, z) point are

represented by a trio of radius, azimuthal angle, and
height values calculated according to the following
convention:

The radius value (r) represents the distance from the

origin along the X-Y plane.

The azimuthal angle value (a) represents the angle with

respect to the positive X direction, calculated within the
X-Y plane according to the right-hand rule. This angle
ranges from 0 to 360 degrees.

The height value (h) represents the distance from the

origin along the cylindrical axis (or Z axis).

The spherical coordinates of a (x, y, z) point are

represented by a trio of radius, azimuthal angle, and
inclination angle values calculated according to the
following convention:

The radius value () represents the distance from the

origin.

The azimuthal angle value () represents the angle with

respect to the positive direction, calculated within the
X-Y plane according to the right-hand rule. This angle
ranges from 0 to 360 degrees.

The inclination angle value () represents the angle

with respect to the vertical axis (or positive Z axis). This
angle ranges from 0 to 180 degrees.

95
COORDINATE SYSTEMS ALIGN

Creating and activating coordinate systems

IMInspect projects come with a default coordinate system called
world. New coordinate systems can be created as well from feature
primitives, from translations and rotations, or numerically. When a
new coordinate system is created, it is automatically activated.

As shown to the right, the active coordinate system is displayed

using red, green, and blue for the X, Y, and Z axes respectively.

Objective: Create a new coordinate system using feature primitives

to define the origin and orientation.

Required: Features whose geometric properties (ex. center point, normal) can be used to
describe the origin and orientation of the coordinate system.

Steps

1. Choose Tools > Coordinate Systems > Create

Cartesian.
The Create Cartesian Coordinate Systems
dialog box opens.

2. In the Method list, select From Primitives.

3. In the Primary, Secondary, and Tertiary lists,

select the primitives that define the coordinate
system.
Optionally, click the hand icon and pick the
primitives in the 3D scene.

4. In the 3D scene, clicking the colored arrow on

an axis rotates the other axes around it by
90 degrees, thereby changing their direction.

5. In the Create Cartesian Coordinate Systems

dialog box, click Create to confirm the new
coordinate system.

96
COORDINATE SYSTEMS ALIGN

Tips

All coordinate systems are listed as objects in

the Tree View. The active coordinate system is
displayed in bold in the Tree View, and in color
in the 3D scene. To activate a coordinate
system, right-click it in the Tree View and
choose Activate.

Results

The new coordinate system is added to the The new coordinate system is displayed in
Tree View, under the Coordinate Systems the 3D scene.
branch. It is named csys by default.

97
COORDINATE SYSTEMS ALIGN

Notes

When the creation method is set to

Numerically, the exact origin and axis of
the coordinate system can be specified. No
Reference object or feature primitives are
required.

When the creation method is set to From

Translation and Rotation, the origin and
axes can be offset from the active
coordinate system position by entering
specific values. No Reference object or
feature primitives are required.

98
Measure
MEASUREMENT OBJECTS MEASURE

Introducing measurement objects in IMInspect

Probing
IMInspect Probing is an object-oriented analysis and verification environment. All items
imported or created in IMInspect Probing are objects, and IMInspect Probing preserves the
relational correspondence of these objects throughout the inspection process.

Measurement objects
Measurements are done through the use of measurement objects: data color maps, features,
cross-sections, comparison points, and gauges. These objects have the capability of being
measured, remeasured, updated, and reported. Measurement objects obtain results by
calculating the deviation between nominal components, derived from a Reference object, and
measured components, derived from a Data object. The components of feature and cross-
section measurement objects can be displayed by expanding the objects in the Tree View,
while the components of comparison points and gauges are contained within the objects
themselves. A green check sign is superimposed on the icon of objects that are successfully
measured. For color maps, the green check indicates that the color map is valid.

A simple feature has a nominal and a The nominal and the measured component
measured component. of a cross-section can be represented by
several children, depending on the number
of Reference and Data objects encountered
by its slicing plane.

Automatic project update

Automatic project update is an option that keeps objects up-to-date by recalculating
measured values as related objects are modified. By propagating changes throughout the
inspection project, the coherence of the inspection project is always maintained. For more
information, see Automatic project update on page 446.

100
Data color maps
Surface

Boundary

Primitives

101
INTRODUCING DATA COLOR MAPS MEASURE

Measuring deviations using data color maps

Data color maps are measurement tools that allow
measuring the deviation of Data objects from the surfaces
or boundaries of Reference objects, or from primitives or
other objects. A deviation is calculated for each data point,
or just selected data points, of the Data object. The
deviations are displayed in the 3D scene using a color map,
and can also be presented in report form (table). Color
map display options are available to configure the color
scale and the color mapping to get a specific result, like a
pass/fail representation.

Data color map types

Data color maps are available on the Measure menu or on the Data Color Maps toolbar:

Deviations of Data objects

from Reference object
surfaces

Deviations of Data objects

from Reference object
boundaries

Deviations of Data objects

from feature primitives

102
INTRODUCING DATA COLOR MAPS MEASURE

Understanding key parameters

Parameters are offered for the creation of data color maps. Possible values vary according to
the type of data color map. Here are some key parameters:

Direction
Select a direction along which to measure the deviations. Possible values are illustrated below.
They vary according to the type of data color map.

Tangent to Boundary

Along the axis (X axis) Shortest to

Normal to
Boundary
Boundary
Shortest
Along the axis
(Y axis)

Reference objects
Choose the Reference objects to take into
consideration for the measurement. Possible values
are:

All: Considers all non-ignored Reference objects.

Specific: Considers only specific Reference objects. Specify them in the next list box.
Selected Elements: Considers only the selected elements of Reference objects.

Data objects
Choose which Data objects to take into consideration
for the measurement. Possible values are:

Surface: Considers all surface Data objects, which

includes probed surface point clouds and probed
points.
Boundary: Considers all boundary Data objects, such as probed boundary point clouds.
All: Considers all non-ignored Data objects.
Specific: Considers only specific Data objects. Select them in the next list box.
Selected Elements: Considers only the selected elements of Data objects.

103
INTRODUCING DATA COLOR MAPS MEASURE

Max distance
To speed up calculations, a maximum search distance is
considered to find the deviations of the Data object
from the Reference object. The default value is 4 mm
and no deviation larger than 4 mm is detected. If large deviations occur on a part, ensure that
the Max distance is larger than the expected deviations so as to measure all deviations.

Max angle
In the Filtering section, the Max angle parameter is
enabled by default. This parameter acts as a filter to
ensure that the normal of each considered data
element has a normal compatible with the reference
surfaces or feature from which the deviations are Data points
measured. The angular deviation between the two 45
normals must be smaller than the specified Max
angle.

If the part is greatly deformed, it may be necessary to

disable this parameter, which allows data elements to Reference object
be considered regardless of their normal direction.

104
DEVIATIONS FROM REFERENCE OBJECT SURFACES MEASURE

Measuring deviations from surfaces

The deviations of Data objects from Reference object surfaces
can be measured. The results are displayed in the 3D scene by
means of a data color map, as shown to the right.

The procedure used to measure deviations is explained below.

For information on the key parameters, see Understanding key
parameters on page 103.

Objective: Obtain the deviations of a Data object from the

surface of a Reference object.

Required: The project contains a Data object, in the form of a probed surface point cloud,
and a Reference object. The Data object must be aligned to the Reference object.

Steps

1. Choose Measure > Deviations of Data Objects >

From Reference Object Surfaces.
The Measure Deviations from Surfaces
dialog box opens.

2. In the Direction list, select the measurement

direction (Shortest, typically).
3. In the Reference objects and Data objects
lists, select the objects to be measured.

4. Specify a Max distance.

5. Click Measure.

Results

The data color map is added to the Tree View, The color-mapped object is displayed in the
under the Data Color Maps branch. 3D scene.

105
DEVIATIONS FROM REFERENCE OBJECT SURFACES MEASURE

Notes

To hide the display of the active data color

map, click Hide Color Map.

To edit the color scale, choose View > Edit Color

Scale. Conversion to colors, scale type, and
range limits can be edited in the interface.

Once created, it is possible to access and edit the color map creation parameters if needed
using its property sheet. Select the object in the Tree View and choose Edit > Object
Properties.

106
DEVIATIONS FROM REFERENCE OBJECT BOUNDARIES MEASURE

Measuring deviations from boundaries

The perimeter of a Data object (usually probed boundary
Data type point clouds) can be compared to the perimeter
of a Reference object by measuring each data point to the
open boundary edges of the Reference object. Deviations
can be measured along the shortest distance, along the
nearest surface normal, or tangent to the boundary. The
results are displayed in the 3D scene by means of a data
color map, as shown to the right.

The procedure used to measure deviations is explained below. For information on the key
parameters, see Understanding key parameters on page 103.

Objective: Measure the deviation of the measured data points from the open boundaries of
the Reference object, generating a data color map.

Required: The project contains a Data object in the form of a probed boundary point cloud
as well as a Reference object with boundary curves. The Data object must be
aligned to the Reference object.

Steps

1. Choose Measure > Deviations of Data Objects >

From Reference Object Boundaries.
The Measure Deviations from Boundaries
dialog box opens.

2. In the Direction list, select a direction of

measurement (Shortest to Boundary
typically).

3. In the Reference objects and Data objects

lists, select the objects to be measured. By
default, the Boundary object type is selected
for Data objects.

4. Specify the Max distance.

5. Click Measure.

107
DEVIATIONS FROM REFERENCE OBJECT BOUNDARIES MEASURE

Results

The new data color map is added to the Tree The color-mapped object is displayed in the
View, under the Data Color Maps branch. 3D scene.

Notes

To hide the display of the active data color

map, click Hide Color Map.

To edit the color scale, choose View > Edit Color

Scale. Conversion to colors, scale type, and
range limits may be edited in the interface.

Once created, it is possible to access and edit the color map creation parameters if needed
using its property sheet. Select the object in the Tree View and choose Edit > Object
Properties.

108
DEVIATIONS FROM FEATURE PRIMITIVES MEASURE

Measuring deviations from feature primitives

The shape of a Data object can be compared to a geometric
feature, such as a plane or cylinder, by measuring each data
point to a feature primitive. The results are displayed in the
3D scene by means of a data color map, as shown to the
right.

The procedure used to measure deviations is explained

below. For information on the key parameters, see Under-
standing key parameters on page 103.

Objective: Measure the deviations of the measured data points from feature primitives,
which generates a data color map.

Required: The project contains a Data object and a feature primitive, which are aligned.

Steps

1. Choose Measure> Deviations of Data Objects >

From Feature Primitives.
The Measure Deviations from Feature
Primitives dialog box opens.

2. In the Direction list, select the measurement

direction.

3. In the Primitives list, select the primitives to be

used.

4. In the Data objects list, select the Data objects

to be used.
To use the data points of the probed primitive,
set the Data object to Specific and select the
probed points.
5. Specify a Max distance.

6. Click Measure.

109
DEVIATIONS FROM FEATURE PRIMITIVES MEASURE

Results

The new data color map is added to the Tree The color-mapped object is displayed in the
View, under the Data Color Maps branch. 3D scene.

Notes

To use a probed surface point cloud instead,

set the Data object to Surface.

To hide the display of the active data color

map, click Hide Color Map.

To edit the color scale, choose View > Edit Color

Scale. Conversion to colors, scale type, and
range limits can be edited in the interface.

Once created, it is possible to access and edit the color map creation parameters if needed
using its property sheet. Select the object in the Tree View and choose Edit > Object
Properties.

110
COLOR MAP DISPLAY OPTIONS MEASURE

Changing the color map display

The color scale controls the way measured deviations are converted to colors in color maps.
IMInspect Probing provides many predefined color scales, and an interface that allows
customizing them.

Objective: View a color map using different color scales.

Required: A project contains an active data color map.

Steps

1. Choose View > Edit Color Scale.

The Edit Color Scale dialog box opens.

2. In the Conversion to colors list, select a

method. The following methods are available:
Auto Range assigns a predefined range of
colors to the range of color map values.
Use Customized Scale assigns colors based
on a specific range of values.
Use Object Tolerances assigns colors based
on the pass/fail status of data points.

3. In the Scale type list, select a predefined type.

4. To create a custom color scale, click Add to
create a completely new color scale, or click
Edit to modify an existing color scale.
5. Edit the Range limits parameters, if using the
Auto Range Conversion to colors, to display the
desired range of deviation values.
6. Click Apply.

111
COLOR MAP DISPLAY OPTIONS MEASURE

Results

If the Auto Range method is specified, the If the Use Object Tolerances method is
range of deviations is displayed as a specified, the deviations are displayed as
continuous map, with minimum and passing or failing the tolerance test, based on
maximum values defined in the Range the tolerance associated with the Reference
limits. object.

Notes

To hide the display of the active data color

map, click Hide Color Map.

Choose Tools > Options > Display > Color Maps

for additional color map display settings such
as the use of deviation vectors and how color
mapping can be applied to both Data and
Reference objects.

Minimum and maximum deviations can be

displayed on a data color map. To view them,
select Identify min and max values, available
on the Display tab of the property sheet of the
data color map.

112
COLOR MAP POINT ANNOTATIONS MEASURE

Displaying data point deviations on a data color map

The deviation value of any data point on a data color map can be displayed using an
annotation. Annotations can be created interactively by clicking the model and then reposi-
tioned for better viewing. Annotation values can also be reported in a table.

Objective: Place annotations on the data color map, showing individual data point
deviations, and report them.

Required: The project contains a Data object aligned to a Reference object, and an active
data color map.

Steps

1. Choose Tools > Annotations > Create > Color

Map Point Annotations.
An interactive picking mode is launched.

2. Hover the pointer over the data points in the

3D scene to temporarily display the deviation of
the closest data point.

3. Click the data point to create the annotation,

which shows the deviation of the data point.
Right-click to exit the mode.

4. For a clearer display, or for snapshot purposes,

the annotations can be dragged. Choose Tools >
Annotations > Drag.
Use the ALT key as a shortcut to drag
annotations.
Changing the 3D scene view will reset
annotation locations.
5. Choose View > Hide > All Color Map Point
Annotations to control the visibility of the
annotations.

6. Choose Report > Create Tables > From All Color

Map Point Annotations of Active Data Color
Map to report the annotations.

113
COLOR MAP POINT ANNOTATIONS MEASURE

Tip

Tools to delete, hide, and restore annotations are also

accessible using the down arrow next to the Create
Color Map Point Annotations button.

Results

Individual data point deviations are displayed Data point annotations are added to a table
using annotations in the 3D scene. for reporting.

114
Features
Points Cylinders

Lines Cones

Planes Spheres

Circles Surfaces

Arcs Slabs

Slots Polylines

Rectangles Patterns

Polygons Distances

Ellipses Angles

115
FEATURES MEASURE

Defining part geometry using features

Features define geometric characteristics of a part, such as holes and planar surfaces, and are
typically used for part alignment and dimensional inspection purposes.

A feature typically contains a nominal and/or a measured component, also referred to as

primitives. The nominal primitive represents the theoretical or ideal measurement, such as
that found on a CAD model. The measured primitive is created from the measured data points
on the actual part being inspected.

Features are available on the Measure > Features menu or on the Features toolbar.

Feature types
Features can be categorized as follows:

Individual features Features containing a nominal and/or a measured primitive.

Individual features can be categorized by their geometrical
properties. The most common categories are:

Surface-based:
Features that have a
surface.
Plane Cylinder Cone Sphere
Curve-based:
Planar curves with a center
point (x, y, z) and a direc-
tional vector (i, j, k). Circle Arc Slot Rectangle Polygon

Ellipse
Other:

Point Line Polyline

*Feature composed of two existing parallel plane
features with opposite orientations and
containing a nominal and/or a measured
Slab* primitive.

116
FEATURES MEASURE

Composite features
Features composed of two or
more existing features.
Distance Angle Pattern

**Feature composed of CAD surfaces (nominal

component) and data points (measured
component).
Surface**

Feature primitives
A feature typically contains a nominal and/or a measured primitive:

Nominal primitives represent the theoretical or ideal

measurement, such as that found on a CAD model.

Measured primitives are the geometrical entities

found on the actual part being inspected.

The feature creation methodology

A standard dialog box with common and contextual parameters is used for the creation of
individual features and their primitives. Other features (surface, slab, angle, distance, and
pattern) are created using their own creation dialog box, described respectively in each
subsection.

The subsections that follow describe the feature creation methods and their parameters.

117
FEATURES MEASURE

The feature creation dialog box

1. Choose Measure > Features > Create.
The Create Features dialog box opens.

2. Expand the feature type drop-down menu and

choose which type of feature to create.

3. In the Name text box, specify a name, if

desired.
4. In the Datum feature label list, assign a
datum label, if desired.
5. In the Method list, select a creation method.
6. In the Submethod list, select a creation
submethod, if available.
7. Specify the required Parameters according
the creation method.
8. In the More section, specify the Primitive
status, if required.
9. Click the appropriate button to launch the
creation.

Key feature creation parameters

The feature creation dialog box offers the following parameters, depending on the feature
type:

Name
A default name is automatically entered in the
Name text box. It can be edited, if desired.
The same name is assigned to the primitive with
the -nom- (nominal) or the -meas- (measured)
suffix according to the primitive status.

Datum feature label

A datum label can be specified for all individual
features, except polylines, to create a Datum

118
FEATURES MEASURE

feature. Datum features are used in GD&T controls (Adding and encoding GD&T controls on
page 325).
Choose a datum letter in the Datum feature label combo box, or type in a customized
datum label, consisting of one or more letters. Note that datum labels cannot contain the
letters I, O, Q, X, Y, and Z. Once created, each feature is assigned the specified datum label.

Method
The creation methods available vary according to
the type of feature selected.
The Pick on CAD Model, Anchor, Numerically,
Probe, and Fit creation methods follow standard
creation processes which are described later, and
result in a feature object with a nominal or a
measured primitive.
Construction methods, such as From Objects,
From Intersection, and From Projection, create
features using existing objects.
The From Elements construction method creates points from selected elements.
The Empty Feature creation method allows creating an empty geometric feature of a
specific type, to which a nominal and/or measured object can eventually be added.

Parameters
The parameters available in the dialog box vary according to the creation method
specified in the Method list box.

Primitive status
A general feature creation operation creates
features containing a nominal or a measured
primitive, according to the specified Primitive
status.
A primitive status is initially defined upon creation,
through the Primitive status group label, found in the More section.

119
FEATURES MEASURE

Creation methods explained

Pick on CAD model

Features (except arcs, points, polylines, and lines) can be created by picking the CAD geometry.
For instance, a cylinder on the CAD model can be picked to create a nominal cylinder feature.

The Pick on CAD Model creation method offers two submethods for surface-based features:

Single Surface: Creates a feature by picking a single CAD surface in the 3D scene.
Multiple Surfaces: Creates a feature by picking multiple CAD surfaces in the 3D scene.

To create different types of features without

opening separate tools, choose Measure >
Features > Create.

The Create Features dialog box opens.

Choose Multiple types from the feature type

drop-down menu.

Most standard features can be picked using this

interface.

To create curve-based features, such as circles

and slots, two approaches can be used:
Move the mouse cursor on a CAD model
surface to select the closest curve-based
feature and pick the one desired when it
highlights.
Move the mouse cursor in the void within a
hole to select the first found primitive based
on the current 3D scene view and pick.

120
FEATURES MEASURE

Anchor

Features can be created by anchoring their primitives on visible Data and Reference objects.

The Anchor creation method enables an interactive mode that allows anchoring primitives.

Each type of feature is created using a specific anchoring method. The How to button displays
a diagram illustrating how to anchor points to create the specified feature type.

When finished anchoring the required number of points, a primitive passing through the
picked points is automatically created and added to the Tree View.

Numerically

Features can be created numerically using mathematical definitions.

The Numerically creation method offers parameters specific to the type of primitive being
created.

Point, Center, Origin, or Apex coordinates can be provided by manually entering the (x, y, z)
coordinates, or by dragging a center-point-based primitive (arc, circle, ellipse, point, polygon,
rectangle, slot, and sphere) and dropping it over the x, y, or z text box.

A Radius value can be provided manually, or by dragging a primitive with a radius (arc, circle,
polygon, rectangle, slot, cylinder, and sphere) dropping it over the text box.

Orientation or Normal coordinates can be provided by manually entering the (i, j, k)

coordinates, or by dragging a direction-based primitive (arc, circle, cone, cylinder, ellipse,
plane, polygon, rectangle, slot, and line) and dropping it over the i, j, or k text box.

Probe

Features can be created by probing a primitive directly using a measuring device.

The Probe method offers several parameters that allow users to customize the probing
session.

121
FEATURES MEASURE

Probe method
By default, the Standard submethod is selected
since it gives good results in most of the cases.
However, some specific situations require a
different approach to be able to probe features
successfully.

Thin Material: It is recommended to use this

submethod when probing curved-based features
on an object made of a thin material like sheet
metal. It takes in consideration the thickness of
the material and the constraining plane to
calculate the compensation correctly even when
the probe is in contact with the edge instead of
the sidewall.

Hole smaller than probe: Available for circles

and slots only. It is typically used when the
diameter of a feature is smaller than the probe
diameter. It creates a feature by intersecting the
probe with the constraining plane.

Compensation method
By default, the Compensation Method is
generally set to From Device. This method uses
the Compensation Method value of the probing
device specified on the Probing Device >
Compensation Method page of the IMInspect
Options dialog box. The following values are
available:

Compensation Point: using this method, a final

probed point is used to identify the compensation
direction. The probe is positioned away from the
part material, and the probing session is ended.

Probe Orientation: the probe orientation is used

to identify the compensation direction. The first
point must be gathered with the probe oriented
normal to the contact surface.

122
FEATURES MEASURE

Fixed number of points

In order to more strictly control the way each
feature is probed, it is possible to set the number
of probed points required to define it. When Fixed
number of points is selected, any number of
points greater than or equal to the mathematical
minimum can be specified. The fixed number of
points can also be set for constraining planes.

Constraining planes
A constraining plane helps control the orientation of two-dimensional curve-based features
like circles and slots. Since points probed around the feature perimeter may have different
heights, the constraining plane prevents the feature from fitting at a tilt.

When a curve-based feature such as a circle is

probed, the exact height of each probed point
will vary slightly.

If a constraining plane is specified, the probed

points will be projected onto that plane,
removing the height variation.

123
FEATURES MEASURE

While an unconstrained circle could be tipped

Plane
compared to the part surface, a constrained
circle will lie exactly on the surface plane.
Unconstrained Circle

Plane

Constrained Circle

Probing zone
For curve-based features, it is possible to define a
probing zone which prevents capturing points if
the probe is located outside of it. This can be used
for example, to prevent capturing points on a
chamfer or other undesirable areas.

Fit

When creating or extracting features from a point cloud or polygonal model, the user can
specify how the feature should be fit. Three options are available: Best-fit, Min, and Max. The
method specified will determine where, within the data elements of qualifying distance and
angle, the feature primitive will be positioned. The Fit creation method allows creating
features by fitting their primitives to selected Data or Reference object elements or to picked
points.

If the Best-fit method is selected, a standard best-fit algorithm is applied, using a pure least-
squares approach to generate a feature that is an average fit within the eligible data elements.
The Best-fit method is the default fit type for many feature types, such as planes. It is a
reasonable choice in regions where the point cloud is expected to generally define a smooth
surface and any digitizer noise would be equally distributed above and below the surface.

If the Min method is selected, the feature is fit such that no points are enclosed by the
primitive. For a circular hole, the circle feature would fit to the innermost eligible data points,
while for a planar surface, the plane would fit to the bottom eligible data points. It is a
reasonable choice when defining a hole in the piece, because it describes the largest mating
diameter possible without interference.

If the Max method is selected, the fitting algorithm applied creates the smallest primitive that
encloses all considered data points. For a cylindrical pin, the cylinder would fit to the
outermost eligible data points, while for a planar surface, the plane would fit to the top
eligible points. The Max method is a reasonable choice when defining a physical pin or diffuse
surface like honeycomb, because it describes the actual mating surface without interference.

124
FEATURES MEASURE

A Best-fit, Min, and Max circle feature, fit to a

selection of data points.

A Best-fit, Min, and Max plane, fit to a selection

of data points.

125
FEATURES MEASURE

Constructing features

When creating features using construction methods, such as From objects or From
Intersection, the creation method section of the creation dialog box offers a submethod
selection list box. If the objects required for the construction are preselected in the Tree View,
a corresponding construction submethod is automatically specified according to the type of
objects selected.

When constructing features using existing features, the primitives of the selected features are
divided into two separate groups, nominal and measured, and the desired construction
operation is performed on each group. Note the following:

If all the source features contain a nominal primitive, the resulting features also contain a
nominal primitive.
If all the source features contain a measured primitive, the resulting features also contain
a measured primitive.
The nominal primitive and the measured primitive created using the same source feature
belong to the same resulting feature.

If both the nominal and the measured primitives could not be created, and the Create
dependencies check box was selected in the More subsection of the creation dialog box,
corresponding empty features will be created. Otherwise, no feature is created.

Creating features from files

Commands on the Measure > Features > Create from Files submenu allow importing same-type
primitives from text files, as well as importing one or more types of primitives from specific
file types (for example, IGES files).

Each new primitive is assigned to a new feature of the primitive type. For example, importing a
circle results in the creation of a circle feature that contains the circle primitive. The status of
the new primitives (nominal or measured) can be specified at import.

Feature dependencies
When a feature is constructed using existing objects in the project, for example, when using
the From Objects method, the newly created features are dependent on the parent objects
used to create them. This means that any changes made to the parent objects will result in the
recalculation of the dependent features.

Dependent features can be easily identified in the

Tree View, by a red chain icon next to the feature
icon.

To remove the dependencies of a feature, select it in

the Tree View and choose Measure > Features > Remove Dependencies.

126
FEATURES MEASURE

Duplicating cross-section features in 3D

Features created on a cross-section for 2D inspection can be duplicated in 3D for other
purposes.

The resulting duplicated feature is dependent to its cross-section feature counterpart: the
nominal primitive, on the one hand, is identical to the cross-section feature, except for arc
features, which are duplicated as circles; the measured primitive, on the other hand, can
deviate from the cross-section feature, since it is extracted in the active alignment instead of
the alignment used to extract the cross-section.

127
POINT FEATURES MEASURE

Creating point features

Point features are typically created with a nominal primitive using different creation methods.
The measured primitive is subsequently added to the feature using specific methods.

The creation procedures are explained in the following subsections. For information on the
creation methods and their key parameters, see The feature creation methodology on page 117.

Creating nominal point primitives

Objective: Create a nominal point primitive interactively or using mathematical definitions.

Required: The project contains at least a Reference object, a Data object, a surface-based
feature, a curve-based feature, or a cross-section-based object, or the information
that defines the nominal primitive is available.

Steps

1. Choose Measure > Features > Create.

The Create Features dialog box opens.

2. Expand the feature type drop-down menu and

choose Point.
3. Choose one of the following methods.

Numerically
1. In the Method list, select Numerically.
2. Specify the Point coordinates to define the
feature.
3. Click Create.

128
POINT FEATURES MEASURE

Anchor
1. In the Method list, select Anchor.
The interactive anchoring mode is automati-
cally activated. If not, click Anchor.
2. In the 3D scene, anchor a point at the desired
location.
Press and hold SHIFT when anchoring to pick the
closest vertex on a polygonal model.
3. Right-click to exit the anchoring mode.

Results

The point feature and its nominal primitive The nominal primitive is displayed in the 3D
are added to the Tree View, under the scene.
Features branch.

129
POINT FEATURES MEASURE

Obtaining measured point primitives

To obtain the measured primitive of a point feature, the most typical method available is
Probe. The method is explained in the following subsection.

Probe
Objective: Create the measured point primitive by probing it.

Required: The project contains a nominal point primitive. A probing device is ready to use.

Steps

1. In the Tree View, select the features to probe.

2. Choose Measure > Features > Define Measured.

Alternatively, right-click the selected features in
the Tree View and choose Probe Measured.
The Define Measured Feature Components
dialog box opens.

3. In the Method list, select Probe.

4. In the Submethod list, select
Uncompensated.
5. Click Probe.
6. Probe the measured point primitive.

Results

The probed measured primitive is added to The primitives are displayed in the 3D scene.
the point feature, under the Features branch
of the Tree View.

130
POINT FEATURES MEASURE

Notes

To probe a measured primitive without a nominal

primitive:

1. Choose Measure > Features.

2. Expand the feature type drop-down menu and
choose Point.
3. In the Method list, select Probe.

131
POINT FEATURES MEASURE

Constructing point features

Objective: Construct a point feature using existing objects.

Required: The project contains objects.

Steps

1. Select the objects to use for the construction in

the Tree View.
2. Choose Measure > Features > Create.
The Create Features dialog box opens.

3. Expand the feature type drop-down menu and

choose Point.
4. Select one of the following methods.

From Objects
1. In the Method list, select From Objects.
2. In the Submethod list, select a submethod.
A corresponding construction submethod is
automatically specified according to the type of
selected objects.
3. Specify the required parameters, if necessary.
4. Click Create.
Example 1: The Circle Centers submethod
creates a point at the center point of each
selected circle. This submethod is available for
all curve-based features.

132
POINT FEATURES MEASURE

Example 2: The Profile Gauges submethod

creates characteristic points related to the
profile gauge, such as tangency points.

From Intersection
1. In the Method list, select From Intersection.
2. In the Submethod list, select a submethod.
A corresponding construction submethod is
automatically specified according to the type of
selected objects.
3. Specify the required parameters, if necessary.
4. Click Create.
Example: The Plane and Cylinders
submethod creates a point at the intersection
of a selected plane and the axis of each
selected cylinder.

Results

The constructed point feature is added to the The point feature is displayed in the
Tree View, under the Features branch and a 3D scene.
chain overlays the icon indicating its
dependent status.

133
POINT FEATURES MEASURE

Notes

These methods generate dependent point features, which means that if something affects the
source objects, it affects the dependent point feature as well. For example, if the source object
becomes measured, the dependent point feature becomes measured as well.

134
LINE FEATURES MEASURE

Creating line features

Line features are typically created with a nominal primitive using different creation methods.
The measured primitive is subsequently added to the feature using specific methods.

The creation procedures are explained in the following subsections. For information on the
creation methods and their key parameters, see The feature creation methodology on page 117.

Creating nominal line primitives

Objective: Create a nominal line primitive interactively or using mathematical definitions.

Required: The project contains at least a Reference object, a Data object, a surface-based
feature, a curve-based feature, a cross-section-based object, or the information
that defines the nominal primitive is available.

Steps

1. Choose Measure > Features > Create.

The Create Features dialog box opens.

2. Expand the feature type drop-down menu and

choose Line.
3. Choose one of the following methods.

Numerically
1. In the Method list, select Numerically.
2. In the Submethod list, select Origin and
Orientation.
3. Specify the required values to define the
feature Origin, Orientation, and Length.
4. Click Create.

135
LINE FEATURES MEASURE

Anchor
1. In the Method list, select Anchor.
2. In the Submethod list, select Pick 2.
The interactive anchoring mode is automati-
cally activated. If not, click Anchor.
3. In the 3D scene, anchor two points at the
desired location.
Press and hold SHIFT when anchoring to pick the
closest vertex on a cross-section component.
4. Right-click to exit the anchoring mode.

Results

The line feature and its nominal primitive are The nominal primitive is displayed in the
added to the Tree View, under the Features 3D scene.
branch.

136
LINE FEATURES MEASURE

Obtaining measured line primitives

To obtain the measured primitive of a line feature, the most typical method available is Probe.

Probe
Objective: Create the measured line primitive by probing it.

Required: The project contains a nominal line primitive. A probing device is ready to use.

Steps

1. In the Tree View, select the line features to

probe.

2. Choose Measure > Features > Define Measured.

Alternatively, right-click the selected features in
the Tree View and choose Probe Measured.
The Define Measured Feature Components
dialog box opens.

3. In the Method list, select Probe.

4. In the Submethod list, select Standard.
5. Constrain the feature to a plane.
Select Use Plane Feature to use an existing
plane in the Tree View, or to probe a new
one that will appear in the Tree View.
Select Probe Local Plane to probe a local
plane. Note that this plane is stored within
the feature and does not appear in the Tree
View.
6. Click Probe.
7. Probe the constraining plane, if (Probe New)
or Probe Local Plane is specified.
8. Probe the measured line primitive.

137
LINE FEATURES MEASURE

Tips
If a feature contains a nominal primitive, it is
highlighted and centered in the 3D scene for
guidance.
A minimum number of points must be probed
to fit a valid primitive.
The probed primitive is compensated
according to the specified compensation
method set in the More section.
Click the How to button in the dialog box to
view the steps required to probe the feature.

Results

The probed measured primitive is added to The primitives are displayed in the 3D scene.
the line feature, under the Features branch of
the Tree View.

138
LINE FEATURES MEASURE

Notes

A nominal primitive offers guidance when probing the measured primitive, but is not
necessary. To probe a measured primitive without a nominal primitive:

Choose Measure > Features > Create.

Expand the feature type drop-down menu

and choose Line.

In the Method list, select Probe.

During probing, probed points are collected

at the center of the probe tip.

Compensation is necessary to offset the

measured points to the point of contact.
When using Compensation point as the
compensation method, the line is compen-
sated by moving the probe slightly off the
surface and ending the probing.

139
LINE FEATURES MEASURE

Constructing line features

Objective: Construct a line feature using existing objects.

Required: The project contains existing objects.

Steps

1. Select the objects to use for the construction in

the Tree View.
2. Choose Measure > Features > Create.
The Create Features dialog box opens.

3. Expand the feature type drop-down menu and

choose Line.
4. Choose one of the following methods.

From Objects
1. In the Method list, select From Objects.
2. In the Submethod list, select a submethod.
A corresponding construction submethod is
automatically specified according to the type of
selected objects.
3. Specify the required parameters, if necessary.
4. Click Create.
Example: The Cylinder Axes submethod
creates a line using the axis of each selected
cylinder.

140
LINE FEATURES MEASURE

From Intersection
1. In the Method list, select From Intersection.
2. In the Submethod list, select a submethod.
A corresponding construction submethod is
automatically specified according to the type of
selected objects.
3. Specify the required parameters, if necessary.
4. Click Create.
Example: The 2 Planes submethod creates a
line at the intersection of two selected planes.

Results

The constructed line feature is added to the The line feature is displayed in the 3D scene.
Tree View, under the Features branch and a
chain overlays the icon indicating its
dependent status.

Notes

These methods generate dependent line features, which means that if something affects the
source objects, it affects the dependent line feature as well. For example, if the source object
becomes measured, the dependent line feature becomes measured as well.

To make the line features independent, choose Measure > Features > Remove Dependencies.

141
PLANE FEATURES MEASURE

Creating plane features

Plane features are typically created with a nominal primitive using different creation methods.
The measured primitive is subsequently added to the feature using specific methods.

The creation procedures are explained in the following subsections. For information on the
creation methods and their key parameters, see The feature creation methodology on page 117.

Creating nominal plane primitives

Objective: Create a nominal plane primitive interactively using Reference object elements or
a mathematical definition.

Required: The project contains a Reference object or the information that defines the
nominal primitive is available.

Steps

1. Choose Measure > Features > Create.

The Create Features dialog box opens.

2. Expand the feature type drop-down menu and

choose Plane.
3. Choose one of the following methods.

Pick on CAD Model

1. In the Method list, select Pick on CAD Model.
2. Click Pick to launch the interactive picking
mode.
3. In the 3D scene, pick a CAD surface to create
the plane.
4. Right-click to exit the picking mode.

142
PLANE FEATURES MEASURE

Numerically
1. In the Method list, select Numerically.
2. In the Submethod list, select Point and
Normal.
3. Specify the required values to define the
feature Point and Normal.
4. Click Create.

Anchor
1. In the Method list, select Anchor.
2. In the Submethod list, select Pick 3.
The interactive anchoring mode is automati-
cally activated. If not, click Anchor.
3. In the 3D scene, anchor three points on the
surface to create a plane.
Press and hold SHIFT when anchoring to pick the
closest vertex on a polygonal model.

Extract from Polygonal Models

1. Choose Measure > Features > Extract from
Polygonal Models.
The Extract Primitives from Polygonal Models
dialog box opens.

2. Specify the feature Type.

The Automatic method is specified by default,
which automatically determines the feature
type that adjusts better to the area selected.
3. Specify the Method.
The Single Detection Zone method is selected
by default. The Multiple Detection Zones
method is useful when all areas that can be
used to extract the feature primitive are not
contiguous.

143
PLANE FEATURES MEASURE

4. In the 3D scene, using the circular detection

zone around the mouse pointer, click an area
on the polygonal model that is part of the
desired feature.
It is possible to increase or decrease the size of
the detection zone at any time in the Parameters
subsection, or using the mouse wheel.

5. Click Confirm.

Results

The plane feature and its nominal primitive The nominal primitive is displayed in the
are added to the Tree View, under the 3D scene.
Features branch.

144
PLANE FEATURES MEASURE

Obtaining measured plane primitives

To obtain the measured primitive of a plane feature, the most common methods used are
Probe and Fit. Each method is explained in the following subsections.

Probe
Objective: Create the measured plane primitive by probing it.

Required: The project contains a nominal plane primitive. A probing device is ready to use.

Steps

1. In the Tree View, select the plane feature to

probe.

2. Choose Measure > Features > Define Measured.

Alternatively, right-click the selected features in
the Tree View and choose Probe Measured.
The Define Measured Feature Components
dialog box opens.

3. In the Method list, select Probe.

4. In the Submethod list, select Standard.
5. Click Probe.
6. Probe the measured plane primitive.

Tips
If a feature contains a nominal primitive, it is
highlighted and centered in the 3D scene for
guidance.
A minimum number of points must be probed
to fit a valid primitive.
The probed primitive is compensated
according to the specified compensation
method set in the More section.
Click the How to button in the dialog box to
view the steps required to probe the feature.

145
PLANE FEATURES MEASURE

Results

The probed measured primitive is added to The primitives are displayed in the 3D scene.
the plane feature, under the Features branch
of the Tree View.

Notes

A nominal primitive offers guidance when probing the measured primitive, but is not
necessary. To probe a measured primitive without a nominal primitive:

Choose Measure > Features > Create.

Expand the feature type drop-down menu

and choose Plane.

In the Method list, select Probe.

If the probing device is already aligned to a

CAD model, the nominal primitive can be
extracted at the same time by activating the
Extract nominal primitive from CAD
model option.

146
PLANE FEATURES MEASURE

During probing, probed points are collected

at the center of the probe tip. Compen-
sation is necessary to offset the measured
points to the point of contact.
When using Compensation point as the
compensation method, a plane is compen-
sated by lifting the probe slightly off the
surface and ending the probing.

Fit
Objective: Create measured plane primitives interactively using data elements.

Required: The project contains a Data object.

Steps

1. Choose Measure > Features > Create.

The Create Features dialog box opens.

2. Expand the feature type drop-down menu and

choose Plane.

3. In the Method list, select Fit.

4. In the Submethod list, select Fit to Elements.

5. Select a Fit type.

147
PLANE FEATURES MEASURE

6. In the 3D scene, select the elements that will

be used to fit the plane.
Use the Select and Deselect modes to refine the
selection.
7. Click Create to fit a primitive to the selected
elements.

Tips
To use the Fit method to define the measured primitive of an existing feature, select the
feature in the Tree View and choose Measure > Features > Define Measured.

Results

The measured primitive is added to the plane The primitive is displayed in the 3D scene.
feature, under the Features branch of the
Tree View.

148
PLANE FEATURES MEASURE

Constructing plane features

Objective: Construct a plane feature using existing objects.

Required: The project contains existing objects.

Steps

1. In the Tree View, select the objects required for

the construction.
2. Choose Measure > Features > Create.
The Create Features dialog box opens.

3. Expand the feature type drop-down menu and

choose Plane.
4. Choose one of the following methods.

From Objects
1. In the Method list, select From Objects.
2. In the Submethod list, select a submethod.
A corresponding construction submethod is
automatically specified according to the type of
selected objects.
3. Specify the required parameters, if necessary.
4. Click Create.
Example: The Average of Planes submethod
creates a plane by averaging the selected
planes.

149
PLANE FEATURES MEASURE

Results

The constructed plane feature is added to the The plane feature is displayed in the
Tree View, under the Features branch and a 3D scene.
chain overlays the icon indicating its
dependent status.

150
CIRCLE FEATURES MEASURE

Creating circle features

Circle features are typically created with a nominal primitive using different creation methods.
The measured primitive is subsequently added to the feature using specific methods.

The creation procedures are explained in the following subsections. For information on the
creation methods and their key parameters, see The feature creation methodology on page 117.

Creating nominal circle primitives

Objective: Create a nominal circle primitive interactively using Reference object elements or
a mathematical definition.

Required: The project contains a Reference object, or the information that describes the
nominal primitive is available.

Steps

1. Choose Measure > Features > Create.

The Create Features dialog box opens.

2. Expand the feature type drop-down menu and

choose Circle.
3. Choose one of the following methods.

Pick on CAD Model

1. In the Method list, select Pick on CAD Model.
2. Click Pick to launch the interactive picking
mode.
3. In the 3D scene, pick a circle. Two approaches
can be used:
Move the mouse cursor on the CAD model
surface to select the closest circle feature
and pick the one desired when it is
highlighted.
Move the mouse cursor in the void within
the hole to select the first found circle based
on the current 3D scene view, then pick.

151
CIRCLE FEATURES MEASURE

Numerically
1. In the Method list, select Numerically.
2. Specify the required values to define the
feature Center, Orientation, and Radius.
3. Click Create.

Anchor
1. In the Method list, select Anchor.
The interactive anchoring mode is automati-
cally activated. If not, click Anchor.
2. In the 3D scene, anchor three points on a hole
boundary to create a circle.
Press and hold SHIFT when anchoring to pick the
closest vertex on a polygonal model.

Results

The circle feature and its nominal primitive The nominal primitive is displayed in the
are added to the Tree View, under the 3D scene.
Features branch.

152
CIRCLE FEATURES MEASURE

Obtaining measured circle primitives

To obtain the measured primitive of a circle feature, the most common methods used are
Probe and Fit. Each method is explained in the following subsections.

Probe
Objective: Create the measured circle primitive by probing it, along with its constraining
plane, if required.

Required: The project contains a nominal circle primitive. A probing device is ready to use.

Steps

1. In the Tree View, select the features to probe.

2. Choose Measure > Features > Define Measured.

Alternatively, right-click the selected features in
the Tree View and choose Probe Measured. The
Define Measured Feature Components dialog
box opens.

3. In the Method list, select Probe.

4. In the Submethod list, select Standard.
For more information on other available
submethods, see Probe method on page 122.
5. Specify a constraining plane.
Select Use Plane Feature to use an existing
plane in the Tree View, or to probe a new
one that will appear in the Tree View.
Select Probe Local Plane to probe a new
plane. Note that this plane is stored within
the feature and does not appear in the Tree
View.
6. Click Probe.
7. Probe the constraining plane, if (Probe New)
or Probe Local Plane is specified.
8. Probe the measured circle primitive.

153
CIRCLE FEATURES MEASURE

Tips
If a feature contains a nominal primitive, it is
highlighted and centered in the 3D scene for
guidance.
A minimum number of points must be probed
to fit a valid primitive.
The probed primitive is compensated
according to the specified compensation
method set in the More section.
Click the How to button in the dialog box to
view the steps required to probe the feature.

Results

The probed measured primitive is added to The primitives are displayed in the 3D scene.
the circle feature, under the Features branch
of the Tree View.

Notes

A nominal primitive offers guidance when probing the measured primitive, but is not
necessary. To probe a measured primitive without a nominal primitive:

154
CIRCLE FEATURES MEASURE

Choose Measure > Features > Create.

Expand the feature type drop-down menu

and choose Circle.

In the Method list, select Probe.

If the probing device is already aligned to a

CAD model, the nominal primitive can be
extracted at the same time by activating the
Extract nominal primitive from CAD
model option.

During probing, probed points are collected

at the center of the probe tip. Compen-
sation is necessary to offset the measured
points to the point of contact.

When using Compensation point as the

compensation method, a plane is compen-
sated by lifting the probe slightly off the
surface and ending the probing.

When using Compensation point as the

compensation method, a circle is compen-
sated by moving the probe inward (hole) or
outward (pin) from the feature boundary,
then ending the probing.

155
CIRCLE FEATURES MEASURE

Fit
Objective: Create measured circle primitives interactively using data elements.

Required: The project contains a Data object.

Steps

1. Choose Measure > Features > Create.

The Create Features dialog box opens.

2. Expand the feature type drop-down menu and

choose Circle.

3. In the Method list, select Fit.

4. In the Submethod list, select Fit to Elements.
5. Select the Fit type.
6. Under Constraints, select Plane, then select a
constraining plane, if required.
It is recommended to use a constraining plane to
create the feature correctly oriented in space. The
plane should be created prior to the fitting.

7. Choose Select > Elements > Interactively.

156
CIRCLE FEATURES MEASURE

8. In the 3D scene, select the elements that will

be used to fit the circle.
See Selecting elements on page 45 for
information on how to select elements
interactively.
9. Click Create to fit a primitive to the selected
elements.

Tips
To use the Fit method to define the measured primitive of an existing feature, select the
feature in the Tree View and choose Measure > Features > Define Measured.

Results

The measured primitive is added to the circle The primitive is displayed in the 3D scene.
feature, under the Features branch of the
Tree View.

Constructing circle features

Objective: Construct a circle feature using existing objects.

Required: The project contains existing objects.

Steps

1. Select the objects to use for the construction in

the Tree View.
2. Choose Measure > Features > Create.
The Create Features dialog box opens.

157
CIRCLE FEATURES MEASURE

3. Expand the feature type drop-down menu and

choose Circle.
4. Choose one of the following methods.

From Objects
1. In the Method list, select From Objects
2. In the Submethod list, select a submethod.
A corresponding construction submethod is
automatically specified according to the type of
selected objects.
3. Specify the required parameters, if necessary.
4. Click Create.
Example: The Cylinders submethod creates a
circle at each end of the selected cylinder,
having the orientation of the cylinder.

From Intersection
1. In the Method list, select From Intersection.
2. In the Submethod list, select a submethod.
A corresponding construction submethod is
automatically specified according to the type of
selected objects.
3. Specify the required parameters, if necessary.
4. Click Create.
Example: The Plane and Cylinders
submethod creates a circle centered at the
intersection of a selected plane and the axis of
each selected cylinder, oriented using the
normal of the plane, and with a radius equal to
the radius of the cylinder.

158
CIRCLE FEATURES MEASURE

Results

The constructed circle features are added to The circle features are displayed in the
the Tree View, under the Features branch and 3D scene.
a chain overlays the icon indicating its
dependent status.

Notes

These methods generate dependent circle features, which means that if something affects the
source objects, it affects the dependent circle feature as well. For example, if the source object
becomes measured, the dependent circle feature becomes measured as well.

To make the circle features independent, choose Measure > Features > Remove Dependencies.

159
SLOT FEATURES MEASURE

Creating slot features

Slot features are typically created with a nominal primitive using different creation methods.
The measured primitive is subsequently added to the feature using specific methods.

The creation procedures are explained in the following subsections. For information on the
creation methods and their key parameters, see The feature creation methodology on page 117.

Creating nominal slot primitives

Objective: Create a nominal slot primitive interactively using Reference object elements or a
mathematical definition.

Required: The project contains a Reference object, or the information that defines the
nominal primitive is available.

Steps

1. Choose Measure > Features > Create.

The Create Features dialog box opens.

2. Expand the feature type drop-down menu and

choose Slot.
3. Choose one of the following methods.

Pick on CAD Model

1. In the Method list, select Pick on CAD Model.
2. Click Pick to launch the interactive picking
mode.
3. In the 3D scene, pick a slot. Two approaches
can be used:
Move the mouse cursor on the CAD model
surface to select the closest slot feature and
pick the one desired when it is highlighted.
Move the mouse cursor in the void within
the hole to select the first found slot based
on the current 3D scene view, then pick.

160
SLOT FEATURES MEASURE

Numerically
1. In the Method list, select Numerically.
2. Specify the values to define the feature Center,
Axis orientation, Length orientation, Length
and Width.
3. Click Create.

Anchor
1. In the Method list, select Anchor.
The interactive anchoring mode is automati-
cally activated. If not, click Anchor.
2. In the 3D scene, anchor three points on one of
the arc boundary and two points on the other
arc boundary.
Press and hold SHIFT when anchoring to pick the
closest vertex on a polygonal model.

Results

The slot feature and its nominal primitive are The nominal primitive is displayed in the
added to the Tree View, under the Features 3D scene.
branch.

161
SLOT FEATURES MEASURE

Obtaining measured slot primitives

To obtain the measured primitive of a slot feature, the most common methods used are
Probe and Fit. Each method is explained in the following subsections.

Probe
Objective: Create the measured slot primitive by probing it, along with its constraining plane,
if required.

Required: The project contains a nominal slot primitive. A probing device is ready to use.

Steps

1. In the Tree View, select the slot feature to

probe.

2. Choose Measure > Features > Define Measured.

Alternatively, right-click the selected features in
the Tree View and choose Probe Measured.
The Define Measured Feature Components
dialog box opens.

3. In the Method list, select Probe.

4. In the Submethod list, select Standard.
For more information on other available
submethods, see section Probe method on
page 122.
5. Specify a constraining plane.
Select Use Plane Feature to use an existing
plane in the Tree View, or to probe a new
one that will be added to the Tree View.
Select Probe Local Plane to probe a new
plane. Note that this plane is stored within
the feature and does not appear in the Tree
View.
6. Click Probe.
7. Probe the constraining plane, if (Probe New)
or Probe Local Plane is specified.
8. Probe the measured slot primitive.

162
SLOT FEATURES MEASURE

Tips
If a feature contains a nominal primitive, it is
highlighted and centered in the 3D scene for
guidance.
A minimum number of points must be probed
for each arc to fit a valid primitive.
The probed primitive is compensated
according to the specified compensation
method set in the More section.
Click the How to button in the dialog box to
view the steps required to probe the feature.

Results

The probed measured slot primitive and its The probed slot feature components are
constraining plane are added to the Tree displayed in the 3D scene.
View, under the Features branch.

Notes

A nominal primitive offers guidance when probing the measured primitive, but is not
necessary. To probe a measured primitive without a nominal primitive:

Choose Measure > Features > Create.

Expand the feature type drop-down menu

and choose Slot.

In the Method list, select Probe.

163
SLOT FEATURES MEASURE

If the probing device is already aligned to a

CAD model, the nominal primitive can be
extracted at the same time by activating the
Extract nominal primitive from CAD
model option.

During probing, probed points are collected

at the center of the probe tip. Compen-
sation is necessary to offset the measured
points to the point of contact.

When using Compensation point as the

compensation method, a plane is compen-
sated by lifting the probe slightly off the
surface and ending the probing.

When using Compensation point as the

compensation method, a slot is compen-
sated by moving the probe inward (hole) or
outward (pin) from the feature boundary,
then ending the probing.

Fit
Objective: Create measured slot primitives interactively using data elements.

Required: The project contains a Data object.

Steps

1. Choose Measure > Features > Create.

The Create Features dialog box opens.

164
SLOT FEATURES MEASURE

2. Expand the feature type drop-down menu and

choose Slot.

3. In the Method list, select Fit.

4. In the Submethod list, select Fit to Elements.

5. Select the Fit type.

6. Under Constraints, select Plane, then select a
constraining plane from the list.
It is recommended to use a constraining plane to
create the feature correctly oriented in space. The
plane should be created prior to the fitting.

7. Choose Select > Elements > Interactively.

8. In the 3D scene, select the elements that will

be used to fit the slot.
See Selecting elements on page 45 for
information on how to select elements
interactively.
9. Click Create to fit a primitive to the selected
elements.
Tips
To use the Fit method to define the measured primitive of an existing feature, select the
feature in the Tree View and choose Measure > Features > Define Measured.

165
SLOT FEATURES MEASURE

Results

The measured primitive is added to the slot The primitive is displayed in the 3D scene.
feature, under the Features branch of the Tree
View.

166
RECTANGLE FEATURES MEASURE

Creating rectangle features

Rectangle features are typically created with a nominal primitive using different creation
methods. The measured primitive is subsequently added to the feature using specific
methods.

The creation procedures are explained in the following subsections. For information on the
creation methods and their key parameters, see The feature creation methodology on page 117.

Creating nominal rectangle primitives

Objective: Create a nominal rectangle primitive interactively using Reference object
elements or a mathematical definition.

Required: The project contains a Reference object, or the information that describes the
nominal primitive is available.

Steps

1. Choose Measure > Features > Create.

The Create Features dialog box opens.

2. Expand the feature type drop-down menu and

choose Rectangle.
3. Choose one of the following methods.

167
RECTANGLE FEATURES MEASURE

Pick on CAD Model

1. In the Method list, select Pick on CAD Model.
2. Click Pick to launch the interactive picking
mode.
3. In the 3D scene, pick a rectangle. Two
approaches can be used:
Move the mouse cursor on the CAD model
surface to select the closest rectangle
feature and pick the one desired when it is
highlighted.
Move the mouse cursor in the void within
the hole to select the first found rectangle
based on the current 3D scene view, then
pick.

Numerically
1. In the Method list, select Numerically.

2. Specify the required values to define the

feature Center, Axis orientation, Length
orientation, Length, Width and Corner
radius.
To create a rectangle with sharp corners, set the
Corner radius to zero.

3. Click Create.

168
RECTANGLE FEATURES MEASURE

Anchor
1. In the Method list, select Anchor.
Rectangle with
The interactive anchoring mode is automati- sharp corners
cally activated. If not, click Anchor.
2. Enable the Rounded corners parameters, if
required.
3. In the 3D scene, anchor the required number
of points on a rectangle boundary to create a
rectangle. Rectangle with
Press and hold SHIFT when anchoring to pick the rounder corners
closest vertex on a polygonal model.

Results

The rectangle feature and its nominal The nominal primitive is displayed in the
primitive are added to the Tree View, under 3D scene.
the Features branch.

169
RECTANGLE FEATURES MEASURE

Obtaining measured rectangle primitives

To obtain the measured primitive of a rectangle feature, the most common methods used are
Probe and Fit. Each method is explained in the following subsections.

Probe
Objective: Create the measured rectangle primitive by probing it, along with its constraining
plane, if required.

Required: The project contains a nominal rectangle primitive. A probing device is ready to
use.

Steps

1. In the Tree View, select the features to probe.

2. Choose Measure > Features > Define Measured.

Alternatively, right-click the selected features in
the Tree View and choose Probe Measured.
The Define Measured Feature Components
dialog box opens.

3. In the Method list, select Probe.

4. In the Submethod list, select Standard.
For more information on other available
submethods, see section Probe method on
page 122.
5. Specify a constraining plane:
Select Use Plane Feature to use an existing
plane in the Tree View, or to probe a new
one that will appear in the Tree View.
Select Probe Local Plane to probe a new
plane. Note that this plane is stored within
the feature and does not appear in the Tree
View.
6. Click Probe.
7. Probe the constraining plane, if (Probe New)
or Probe Local Plane is specified.
8. Probe the measured rectangle primitive.

170
RECTANGLE FEATURES MEASURE

Tips
If a feature contains a nominal primitive, it is
highlighted and centered in the 3D scene for
guidance.
A minimum number of points must be probed
for each side to fit a valid primitive.
The probed primitive is compensated
according to the specified compensation
method set in the More section.
Click the How to button in the dialog box to
view the steps required to probe the feature.

Results

The probed measured primitive and the The probed feature components are
constraining plane are added to the Tree displayed in the 3D scene.
View, under the Features branch.

171
RECTANGLE FEATURES MEASURE

Notes

A nominal primitive offers guidance when probing the measured primitive, but is not
necessary. To probe a measured primitive without a nominal primitive:

Choose Measure > Features > Create.

Expand the feature type drop-down menu

and choose Rectangle.

In the Method list, select Probe.

If the probing device is already aligned to a

CAD model, the nominal primitive can be
extracted at the same time by activating the
Extract nominal primitive from CAD
model option.

During probing, probed points are collected

at the center of the probe tip. Compen-
sation is necessary to offset the measured
points to the point of contact.

When using Compensation point as the

compensation method, a plane is compen-
sated by lifting the probe slightly off the
surface and ending the probing.

When using Compensation point as the

compensation method, a rectangle is
compensated by moving the probe inward
(hole) or outward (rectangular shaped pin)
from the feature boundary, then ending the
probing.

172
RECTANGLE FEATURES MEASURE

Fit
Objective: Create measured rectangle primitives interactively using data elements.

Required: The project contains a Data object.

Steps

1. Choose Measure > Features > Create.

The Create Features dialog box opens.

2. Expand the feature type drop-down menu and

choose Rectangle.

3. In the Method list, select Fit.

4. In the Submethod list, select Fit to Elements.
5. Select the Fit type.
6. Under Constraints, select Plane, then select a
constraining plane from the list.
It is recommended to use a constraining plane to
create the feature correctly oriented in space. The
plane should be created prior to the fitting.

7. Choose Select > Elements > Interactively.

8. In the 3D scene, select the elements that will

be used to fit the rectangle.
See Selecting elements on page 45 for
information on how to select elements
interactively.
9. Click Create to fit a primitive to the selected
elements.

173
RECTANGLE FEATURES MEASURE

Tips
To use the Fit method to define the measured primitive of an existing feature, select the
feature in the Tree View and choose Measure > Features > Define Measured.

Results

The measured primitive is added to the The primitive is displayed in the 3D scene.
Rectangle feature, under the Features branch
of the Tree View.

174
POLYGON FEATURES MEASURE

Creating polygon features

Polygon features are typically created with a nominal primitive using different creation
methods. The measured primitive is subsequently added to the feature using specific
methods.

The creation procedures are explained in the following subsections. For information on the
creation methods and their key parameters, see The feature creation methodology on page 117.

Creating nominal polygon primitives

Objective: Create a nominal polygon primitive interactively using Reference object elements
or a mathematical definition.

Required: The project contains a Reference object, or the information that describes the
nominal primitive is available.

Steps

1. Choose Measure > Features > Create.

The Create Features dialog box opens.
2. Choose one of the following methods.
3. Expand the feature type drop-down menu and
choose Polygon.
4. Choose one of the following methods.

175
POLYGON FEATURES MEASURE

Pick on CAD Model

1. In the Method list, select Pick on CAD Model.
2. Click Pick to launch the interactive picking
mode.
3. In the 3D scene, pick a polygon. Two
approaches can be used:
Move the mouse cursor on the CAD model
surface to select the closest polygon feature
and pick the one desired when it is
highlighted.
Move the mouse cursor in the void within
the hole to select the first found polygon
based on the current 3D scene view, then
pick.

Numerically
1. In the Method list, select Numerically.

2. Specify the required values to define the

feature Center, Axis orientation, Vertex
direction, Diameter, and Number of sides.

3. Click Create.

Anchor
1. In the Method list, select Anchor.
The interactive anchoring mode is automati-
cally activated. If not, click Anchor.
2. Specify the Number of sides for the polygon.
3. In the 3D scene, anchor three points at the
corners of the hole to create a polygon.
Press and hold SHIFT when anchoring to pick the
closest vertex on a polygonal model.

176
POLYGON FEATURES MEASURE

Results

The polygon feature and its nominal primitive The nominal primitive is displayed in the
are added to the Tree View, under the 3D scene.
Features branch.

Obtaining measured polygon primitives

To obtain the measured primitive of a polygon feature, the most common methods used are
Probe and Fit. Each method is explained in the following subsections.

Probe
Objective: Create the measured polygon primitive by probing it along with its constraining
plane, if required.

Required: The project contains a nominal polygon primitive. A probing device is ready to
use.

Steps

1. In the Tree View, select the feature to probe.

2. Choose Measure > Features > Define Measured.

Alternatively, right-click the selected features in
the Tree View and choose Probe Measured.
The Define Measured Feature Components
dialog box opens.

177
POLYGON FEATURES MEASURE

3. In the Method list, select Probe.

4. In the Submethod list, select Standard.
For more information on other available
submethods, see section Probe method on
page 122.
5. Specify a constraining plane:
Select Use Plane Feature to use an existing
plane in the Tree View, or to probe a new
one that will appear in the Tree View.
Select Probe Local Plane to probe a new
plane. Note that this plane is stored within
the feature and does not appear in the Tree
View.
6. Specify the Number of sides for the polygon.
7. Click Probe.
8. Probe the constraining plane, if (Probe New)
or Probe Local Plane is specified.
9. Probe the required number of sides for the
measured polygon primitive.

Tips
If a feature contains a nominal primitive, it is
highlighted and centered in the 3D scene for
guidance.
A minimum number of points must be probed
for each side to fit a valid primitive.
The probed primitive is compensated
according to the specified compensation
method set in the More section.
Click the How to button in the dialog box to
view the steps required to probe the feature.

178
POLYGON FEATURES MEASURE

Results

The probed measured primitive and The primitives are displayed in the 3D scene.
constraining plane are added to the Tree
View, under the Features branch.

Notes

A nominal primitive offers guidance when probing the measured primitive, but is not
necessary. To probe a measured primitive without a nominal primitive:

Choose Measure > Features > Create.

Expand the feature type drop-down menu

and choose Polygon.

In the Method list, select Probe.

If the probing device is already aligned to a

CAD model, the nominal primitive can be
extracted at the same time by activating the
Extract nominal primitive from CAD
model option.

During probing, probed points are collected

at the center of the probe tip. Compen-
sation is necessary to offset the measured
points to the point of contact.

179
POLYGON FEATURES MEASURE

When using Compensation point as the

compensation method, a plane is compen-
sated by lifting the probe slightly off the
surface and ending the probing.

When using Compensation point as the

compensation method, a polygon is
compensated by moving the probe inward
(hole) or outward (polygonal shaped pin)
from the feature boundary, then ending the
probing.

180
POLYGON FEATURES MEASURE

Fit
Objective: Create measured polygon primitives interactively using data elements.

Required: The project contains a Data object.

Steps

1. Choose Measure > Features > Create.

The Create Features dialog box opens.

2. Expand the feature type drop-down menu and

choose Polygon.

3. In the Method list, select Fit.

4. In the Submethod list, select Fit to Elements.
5. Select the Fit type.
6. Under Constraints, select Plane, then select a
constraining plane, if required.
It is recommended to use a constraining plane to
create the feature correctly oriented in space. The
plane should be created prior to the fitting.

7. Choose Select > Elements > Interactively.

181
POLYGON FEATURES MEASURE

8. In the 3D scene, select the elements that will

be used to fit the polygon.
See Selecting elements on page 45 for
information on how to select elements
interactively.
9. Click Create to fit a primitive to the selected
elements.

Tips
To use the Fit method to define the measured primitive of an existing feature, select the
feature in the Tree View and choose Measure > Features > Define Measured.

Results

The measured primitive is added to the The primitive is displayed in the 3D scene.
polygon feature, under the Features branch
of the Tree View.

182
ELLIPSE FEATURES MEASURE

Creating ellipse features

Ellipse features are typically created with a nominal primitive using different creation
methods. The measured primitive is subsequently added to the feature using specific
methods.

The creation procedures are explained in the following subsections. For information on the
creation methods and their key parameters, see The feature creation methodology on page 117.

Creating nominal ellipse primitives

Objective: Create a nominal ellipse primitive interactively using Reference object elements
or a mathematical definition.

Required: The project contains a Reference object, or the information that describes the
nominal primitive is available.

Steps

1. Choose Measure > Features > Create.

The Create Features dialog box opens.

2. Expand the feature type drop-down menu and

choose Ellipse.
3. Choose one of the following methods.

183
ELLIPSE FEATURES MEASURE

Pick on CAD Model

1. In the Method list, select Pick on CAD Model.
2. Click Pick to launch the interactive picking
mode.
3. In the 3D scene, pick an ellipse. Two
approaches can be used:
Move the mouse cursor on the CAD model
surface to select the closest ellipse feature
and pick the one desired when it is
highlighted.
Move the mouse cursor in the void within
the hole to select the first found circle based
on the current 3D scene view, then pick.

Numerically
1. In the Method list, select Numerically.

2. Specify the required values to define the

feature Center, Axis orientation, Major
orientation, Major diameter, and Minor
diameter.

3. Click Create.

Anchor
1. In the Method list, select Anchor.
The interactive anchoring mode is automati-
cally activated. If not, click Anchor.
2. In the 3D scene, anchor five points on a hole
boundary to create an ellipse.
Press and hold SHIFT when anchoring to pick the
closest vertex on a polygonal model.

184
ELLIPSE FEATURES MEASURE

Results

The ellipse feature and its nominal primitive The nominal primitive is displayed in the
are added to the Tree View, under the 3D scene.
Features branch.

Obtaining measured ellipse primitives

To obtain the measured primitive of an ellipse feature, the most common methods used are
Probe and Fit. Each method is explained in the following subsections.

Probe
Objective: Create the measured ellipse primitive by probing it, along with its constraining
plane, if required.

Required: The project contains a nominal ellipse primitive. A probing device is ready to use.

Steps

1. In the Tree View, select the feature to probe.

2. Choose Measure > Features > Define Measured.

Alternatively, right-click the selected features in
the Tree View and choose Probe Measured.
The Define Measured Feature Components
dialog box opens.

185
ELLIPSE FEATURES MEASURE

3. In the Method list, select Probe.

4. In the Submethod list, select Standard.
For more information on other available
submethods, see section Probe method on
page 122.
5. Specify a constraining plane:
Select Use Plane Feature to use an existing
plane in the Tree View, or to probe a new
one that will appear in the Tree View.
Select Probe Local Plane to probe a new
plane. Note that this plane is stored within
the feature and does not appear in the Tree
View.
6. Click Probe.
7. Probe the constraining plane, if (Probe New)
or Probe Local Plane is specified.
8. Probe the measured ellipse primitive.

Tips
If a feature contains a nominal primitive, it is
highlighted and centered in the 3D scene for
guidance.
A minimum number of points must be probed
to fit a valid primitive.
The probed primitive is compensated
according to the specified compensation
method set in the More section.
Click the How to button in the dialog box to
view the steps required to probe the feature.

186
ELLIPSE FEATURES MEASURE

Results

The probed measured primitive is added to The primitives are displayed in the 3D scene.
the ellipse feature under the Features branch
in the Tree View.

Notes

A nominal primitive offers guidance when probing the measured primitive, but is not
necessary. To probe a measured primitive without a nominal primitive:

Choose Measure > Features > Create.

Expand the feature type drop-down menu

and choose Ellipse.

In the Method list, select Probe.

If the probing device is already aligned to a

CAD model, the nominal primitive can be
extracted at the same time by activating the
Extract nominal primitive from CAD
model option.

187
ELLIPSE FEATURES MEASURE

During probing, probed points are collected

at the center of the probe tip. Compen-
sation is necessary to offset the measured
points to the point of contact.

When using Compensation point as the

compensation method, a plane is compen-
sated by lifting the probe slightly off the
surface and ending the probing.

When using Compensation point as the

compensation method, an ellipse is
compensated by moving the probe inward
(hole) or outward (pin) from the feature
boundary, then ending the probing.

Fit
Objective: Create measured ellipse primitives interactively using data elements.

Required: The project contains a Data object.

Steps

1. Choose Measure > Features > Create.

The Create Features dialog box opens.

2. Expand the feature type drop-down menu and

choose Ellipse.

188
ELLIPSE FEATURES MEASURE

3. In the Method list, select Fit.

4. In the Submethod list, select Fit to Elements.
5. Select the Fit type.
6. Under Constraints, select Plane, then select a
constraining plane, if required.
It is recommended to use a constraining plane to
create the feature correctly oriented in space. The
plane should be created prior to the fitting.

7. Choose Select > Elements > Interactively.

8. In the 3D scene, select the elements that will

be used to fit the ellipse.
See Selecting elements on page 45 for
information on how to select elements
interactively.
9. Click Create to fit a primitive to the selected
elements.

Tips
To use the Fit method to define the measured primitive of an existing feature, select the
feature in the Tree View and choose Measure > Features > Define Measured.

189
ELLIPSE FEATURES MEASURE

Results

The measured primitive is added to the The primitive is displayed in the 3D scene.
ellipse feature, under the Features branch of
the Tree View.

190
CYLINDER FEATURES MEASURE

Creating cylinder features

Cylinder features are typically created with a nominal primitive using different creation
methods. The measured primitive is subsequently added to the feature using specific
methods.

The creation procedures are explained in the following subsections. For information on the
creation methods and their key parameters, see The feature creation methodology on page 117.

Creating nominal cylinder primitives

Objective: Create a nominal cylinder primitive interactively using Reference object elements
or a mathematical definition.

Required: A Reference object or the information that defines the nominal primitive is
available.

Steps

1. Choose Measure > Features > Create.

The Create Features dialog box opens.

2. Expand the feature type drop-down menu and

choose Cylinder.
3. Choose one of the following methods.

Pick on CAD Model

1. In the Method list, select Pick on CAD Model.
2. Click Pick to launch the interactive picking
mode.
3. In the 3D scene, mouse over the CAD surface
on which to create the cylinder and left-click to
create it.
4. Right-click to exit the picking mode.

191
CYLINDER FEATURES MEASURE

Numerically
1. In the Method list, select Numerically.
2. Specify the required parameter values to
define the feature Origin, Orientation,
Radius, and Height.
3. Click Create.

Anchor
1. In the Method list, select Anchor.
The interactive anchoring mode is automati-
cally activated. If not, click Anchor.
2. In the 3D scene, anchor four points on the
surface to create a cylinder.
Press and hold SHIFT when anchoring to pick the
closest vertex on a polygonal model.

Extract from Polygonal Models

1. Choose Measure > Features > Extract from
Polygonal Models.
The Extract Primitives from Polygonal Models
dialog box opens.

2. Specify the feature Type.

The Automatic type is specified by default,
which automatically determines the feature
type that adjusts better to the area selected.
3. Specify the Method.
The Single Detection Zone method is selected
by default. The Multiple Detection Zones
method is useful when all areas that can be
used to extract the feature primitive are not
contiguous.

192
CYLINDER FEATURES MEASURE

4. In the 3D scene, using the circular detection

zone around the mouse pointer, click an area
on the polygonal model that is part of the
desired feature.
It is possible to increase or decrease the size of
the detection zone at any time in the Parameters
subsection, or by using the mouse wheel.
5. Click Confirm.

Results

The cylinder feature and its nominal primitive The nominal primitive is displayed in the
are added to the Tree View, under the 3D scene.
Features branch.

193
CYLINDER FEATURES MEASURE

Obtaining measured cylinder primitives

To obtain the measured primitive of a cylinder feature, the most common methods used are
Probe and Fit. Each method is explained in the following subsections.

Probe
Objective: Create the measured cylinder primitive by probing it.

Required: The project contains a nominal cylinder primitive. A probing device is ready to use.

Steps

1. In the Tree View, select the feature to probe.

2. Choose Measure > Features > Define Measured.

Alternatively, right-click the selected features in
the Tree View and choose Probe Measured.
The Define Measured Feature Components
dialog box opens.

3. In the Method list, select Probe.

4. In the Submethod list, select Standard.

5. Click Probe.

6. Probe the measured cylinder primitive.

194
CYLINDER FEATURES MEASURE

Tips
If a feature contains a nominal primitive, it will
be highlighted and centered in the 3D scene
for guidance.
A minimum number of points must be probed
to fit a valid primitive.
The probed primitive is compensated
according to the specified compensation
method set in the More section.
Click the How to button in the dialog box to
view the steps required to probe the feature.

Results

The probed measured primitive is added to The primitives are displayed in the 3D scene.
the cylinder feature, under the Features
branch of the Tree View.

Notes

A nominal primitive offers guidance when probing the measured primitive, but is not
necessary. To probe a measured primitive without a nominal primitive:

Choose Measure > Features > Create.

Expand the feature type drop-down menu

and choose Cylinder.

In the Method list, select Probe.

195
CYLINDER FEATURES MEASURE

If the probing device is already aligned to a

CAD model, the nominal primitive can be
extracted at the same time by activating the
Extract nominal primitive from CAD
model option.

During probing, probed points are collected

at the center of the probe tip. Compen-
sation is necessary to offset the measured
points to the point of contact.

When using Compensation point as the

compensation method, a cylinder is
compensated by moving the probe inward
(hole) or outward (pin) from the feature
boundary, then ending the probing.

Fit
Objective: Create measured cylinder primitives interactively using data elements.

Required: The project contains a Data object.

Steps

1. Choose Measure > Features > Create.

The Create Features dialog box opens.
2. Expand the feature type drop-down menu and
choose Cylinder.

196
CYLINDER FEATURES MEASURE

3. In the Method list, select Fit.

4. In the Submethod list, select Fit to Elements.

5. Select the Fit type.

6. Choose Select > Elements > Interactively.

7. In the 3D scene, select the elements that will

be used to fit the cylinder.
See Selecting elements on page 45 for
information on how to select elements
interactively.
8. Click Create to fit a primitive to the selected
elements.

Tips
To use the Fit method to define the measured primitive of an existing feature, select the
feature in the Tree View and choose Measure > Features > Define Measured.

197
CYLINDER FEATURES MEASURE

Results

The measured primitive is added to the The primitive is displayed in the 3D scene.
cylinder feature, under the Features branch of
the Tree View.

198
CONE FEATURES MEASURE

Creating cone features

Cone features are typically created with a nominal primitive using different creation methods.
The measured primitive is subsequently added to the feature using specific methods.

The creation procedures are explained in the following subsections. For information on the
creation methods and their key parameters, see The feature creation methodology on page 117.

Creating nominal cone primitives

Objective: Create a nominal cone primitive interactively using Reference object elements or
a mathematical definition.

Required: The project contains a Reference object, or the information that defines the
nominal primitive is available.

Steps

1. Choose Measure > Features > Create.

The Create Features dialog box opens.

2. Expand the feature type drop-down menu and

choose Cone.
3. Choose one of the following methods.

Pick on CAD Model

1. In the Method list, select Pick on CAD Model.
2. Click Pick to launch the interactive picking
mode.
3. In the 3D scene, mouse over the CAD surface
on which to create the cone and left-click to
create it.
4. Right-click to exit the picking mode.

199
CONE FEATURES MEASURE

Numerically
1. In the Method list, select Numerically.
2. Specify the required values to define the
feature Apex, Orientation, Slope (degrees),
Distance from apex, and Height.
3. Click Create.

Anchor
1. In the Method list, select Anchor.
The interactive anchoring mode is automati-
cally activated. If not, click Anchor.
2. In the 3D scene, anchor four points on the
surface to create a cone.
Press and hold SHIFT when anchoring to pick the
closest vertex on a polygonal model.
3. Right-click to exit the anchoring mode.

Extract from Polygonal Models

1. Choose Measure > Features > Extract from
Polygonal Models.

2. Specify the feature Type.

The Automatic method is specified by default,
which automatically determines the feature
type that adjusts better to the area selected.
3. Specify the Method.
The Single Detection Zone method is selected
by default. The Multiple Detection Zones
method is useful when all areas that can be
used to extract the feature primitive are not
contiguous.

200
CONE FEATURES MEASURE

4. In the 3D scene, using the circular detection

zone around the mouse pointer, click an area
on the polygonal model that is part of the
desired feature.
It is possible to increase or decrease the size of
the detection zone at any time in the Parameters
subsection, or by using the mouse wheel.
5. Click Confirm.

Results

The cone feature and its nominal primitive The nominal primitive is displayed in the
are added to the Tree View, under the 3D scene.
Features branch.

201
CONE FEATURES MEASURE

Obtaining measured cone primitives

To obtain the measured primitive of a cone feature, the most common methods used are
Probe and Fit. Each method is explained in the following subsections.

Probe
Objective: Create the measured cone primitive by probing it.

Required: The project contains a nominal cone feature. A probing device is ready to use.

Steps

1. In the Tree View, select the feature to probe.

2. Choose Measure > Features > Define Measured.

Alternatively, right-click the selected features in
the Tree View and choose Probe Measured.
The Define Measured Feature Components
dialog box opens.

3. In the Method list, select Probe.

4. In the Submethod list, select Standard.

5. Click Probe.

6. Probe the measured cone primitive.

Tips
If a feature contains a nominal primitive, it is
highlighted and centered in the 3D scene for
guidance.
A minimum number of points must be probed
to fit a valid primitive.
The probed primitive is compensated
according to the specified compensation
method set in the More section.
Click the How to button in the dialog box to
view the steps required to probe the feature.

202
CONE FEATURES MEASURE

Results

The probed measured primitive is added to The primitives are displayed in the 3D scene.
the cone feature, under the Features branch
of the Tree View.

Notes

A nominal primitive offers guidance when probing the measured primitive, but is not
necessary. To probe a measured primitive without a nominal primitive:

Choose Measure > Features > Create.

Expand the feature type drop-down menu

and choose Cone.

In the Method list, select Probe.

If the probing device is already aligned to a

CAD model, the nominal primitive can be
extracted at the same time by activating the
Extract nominal primitive from CAD
model option.

During probing, probed points are collected

at the center of the probe tip. Compen-
sation is necessary to offset the measured
points to the point of contact.

203
CONE FEATURES MEASURE

When using Compensation point as the

compensation method, a cone is compen-
sated by moving the probe inward (hole) or
outward (pin) from the feature boundary,
then ending the probing.

Fit
Objective: Create measured cone primitives interactively using data elements.

Required: The project contains a Data object.

Steps

1. Choose Measure > Features > Create.

The Create Features dialog box opens.
2. Expand the feature type drop-down menu and
choose Cone.

3. In the Method list, select Fit.

4. In the Submethod list, select Fit to Elements.

5. Select the Fit type.

6. Choose Select > Elements > Interactively.

204
CONE FEATURES MEASURE

7. In the 3D scene, select the elements that will

be used to fit the cone.
See Selecting elements on page 45 for
information on how to select elements
interactively.
8. Click Create to fit a primitive to the selected
elements.

Tips
To use the Fit method to define the measured primitive of an existing feature, select the
feature in the Tree View and choose Measure > Features > Define Measured.

Results

The measured primitive is added to the cone The primitive is displayed in the 3D scene.
feature, under the Features branch of the
Tree View.

205
SPHERE FEATURES MEASURE

Creating sphere features

Sphere features are typically created with a nominal primitive using different creation
methods. The measured primitive is subsequently added to the feature using specific
methods.

The creation procedures are explained in the following subsections. For information on the
creation methods and their key parameters, see The feature creation methodology on page 117.

Creating nominal sphere primitives

Objective: Create a nominal sphere primitive interactively using Reference object elements
or a mathematical definition.

Required: The project contains a Reference object, or the information that defines the
nominal primitive is available.

Steps

1. Choose Measure > Features > Create.

The Create Features dialog box opens.

2. Expand the feature type drop-down menu and

choose Plane.
3. Choose one of the following methods.

Pick on CAD Model

1. In the Method list, select Pick on CAD Model.
2. Click Pick to launch the interactive picking
mode.
3. In the 3D scene, mouse over the CAD surface
on which to create the sphere and left-click to
create it.
4. Right-click to exit the picking mode.

206
SPHERE FEATURES MEASURE

Numerically
1. In the Method list, select Numerically.

2. Specify the required values to define the

feature Center and Radius.

3. Click Create.

Anchor
1. In the Method list, select Anchor.
The interactive anchoring mode is automati-
cally activated. If not, click Anchor.
2. In the 3D scene, anchor four points on the
surface to create a sphere.
Press and hold SHIFT when anchoring to pick the
closest vertex on a polygonal model.
3. Right-click to exit the anchoring mode.

Extract from Polygonal Models

1. Choose Measure > Features > Extract from
Polygonal Models.

2. Specify the feature Type.

The Automatic method is specified by default,
which automatically determines the feature
type that adjusts better to the area selected.
3. Specify the Method.
The Single Detection Zone method is selected
by default. The Multiple Detection Zones
method is useful when all areas that can be
used to extract the feature primitive are not
contiguous.

207
SPHERE FEATURES MEASURE

4. In the 3D scene, using the circular detection

zone around the mouse pointer, click an area
on the polygonal model that is part of the
desired feature.
It is possible to increase or decrease the size of
the detection radius at any time in the
Parameters subsection, or by using the mouse
wheel.
5. Click Confirm.

Results

The sphere feature and its nominal primitive The nominal primitive is displayed in the
are added to the Tree View, under the 3D scene.
Features branch.

208
SPHERE FEATURES MEASURE

Obtaining measured sphere primitives

To obtain the measured primitive of a sphere feature, the most common methods used are
Probe and Fit. Each method is explained in the following subsections.

Probe
Objective: Create the measured sphere primitive by probing it.

Required: The project contains a nominal sphere primitive. A probing device is ready to use.

Steps

1. In the Tree View, select the features to probe.

2. Choose Measure > Features > Define Measured.

Alternatively, right-click the selected features in
the Tree View and choose Probe Measured.
The Define Measured Feature Components
dialog box opens.

3. In the Method list, select Probe.

4. Click Probe.
5. Probe the measured sphere primitive.

Tips
If a feature contains a nominal primitive, it is
highlighted and centered in the 3D scene for
guidance.
A minimum number of points must be probed
to fit a valid primitive.
The probed primitive is compensated
according to the specified compensation
method set in the More section.
Click the How to button in the dialog box to
view the steps required to probe the feature.

209
SPHERE FEATURES MEASURE

Results

The probed measured primitive is added to The primitives are displayed in the 3D scene.
the sphere feature, under the Features
branch of the Tree View.

Notes

A nominal primitive offers guidance when probing the measured primitive, but is not
necessary. To probe a measured primitive without a nominal primitive:

Choose Measure > Features > Create.

Expand the feature type drop-down menu

and choose Sphere.

In the Method list, select the Probe creation

method.

If the probing device is already aligned to a

CAD model, the nominal primitive can be
extracted at the same time by activating the
Extract nominal primitive from CAD
model option.

During probing, probed points are collected

at the center of the probe tip. Compen-
sation is necessary to offset the measured
points to the point of contact.

210
SPHERE FEATURES MEASURE

When using Compensation point as the

compensation method, a sphere is compen-
sated by moving the probe inward (concave
surface) or outward (convex surface) from
the feature boundary, then ending the
probing.

Fit
Objective: Create measured sphere primitives interactively using data elements.

Required: The project contains a Data object.

Steps

1. Choose Measure > Features > Create.

The Create Features dialog box opens.
2. Expand the feature type drop-down menu and
choose Sphere.

3. In the Method list, select Fit.

4. In the Submethod list, select Fit to Elements.

5. Select the Fit type.

6. Choose Select > Elements > Interactively.

211
SPHERE FEATURES MEASURE

7. In the 3D scene, select the elements that will

be used to fit the sphere.
See Selecting elements on page 45 for
information on how to select elements
interactively.
8. Click Create to fit a primitive to the selected
elements.

Tips
To use the Fit method to define the measured primitive of an existing feature, select the
feature in the Tree View and choose Measure > Features > Define Measured.

Results

The measured primitive is added to the The primitive is displayed in the 3D scene.
sphere feature, under the Features branch of
the Tree View.

212
SURFACE FEATURES MEASURE

Creating surface features

Surface features are created with a nominal component using different creation methods. The
measured component is subsequently added to the feature using specific methods described
in the following subsections.

Creating the nominal component of surface features

Objective: Create the nominal component of a surface feature interactively using Reference
object elements.

Required: The project contains a Reference object in the form of a CAD model.

Steps

1. Choose Select > Elements > Interactively.

2. In the 3D scene, select the CAD surfaces used

to create the nominal component of the
surface feature.

3. Choose Measure > Features > Create.

The Create Features dialog box opens.

4. Expand the feature type drop-down menu and

choose Surface.
5. In the Method list, choose From Reference
Elements.

6. Click Create.

213
SURFACE FEATURES MEASURE

Results

The surface feature is added to the Tree View, The feature is displayed in the 3D scene.
under the Features branch.

214
SURFACE FEATURES MEASURE

Obtaining the measured component of a surface feature

To obtain the measured component of a surface feature, the most common methods used
are Extract, Probe, and From Data Points. Each method is explained in the following
subsections.

Extract
Objective: Extract the measured surface component by detecting it near the nominal
component.

Required: The project contains a feature with a nominal component and an aligned Data
object in the form of a probed surface point cloud.

Steps

1. In the Tree View, select the features to extract.

2. Choose Measure > Extract Measured.

Results

The measured component is extracted and a The feature is displayed in the 3D scene.
green check mark is added to the surface
feature icon in the Tree View, under the
Features branch.

215
SURFACE FEATURES MEASURE

By probing existing surface comparison points

Surface features only support Probe Surface Comparison Points as a measurement method
for probing. This method consists in probing surface comparison points linked to the surface
feature in order to measure the surface feature. In this context, the same guidance
mechanism offered when probing surface comparison points provides guidance when
measuring the surface feature.

Objective: Measure a surface feature by probing existing surface comparison points linked
to the surface feature.

Required: The project contains a Reference object and a surface feature, and the probing
device must be aligned to the Reference object.

Steps

1. In the Tree View, select a surface feature.

2. Choose Measure > Comparison Points > Create >

Surface Points.
The Create Surface Comparison Points dialog
box opens.

3. In the Method list, select Sample using Grid.

4. Specify the Sampling step.

Here, the value is specific to the part.

5. Specify the Projection axis.

6. Specify the Radius.

7. In the Link to object list, select Surface

Feature.

8. Click Create.

216
SURFACE FEATURES MEASURE

The surface comparison points are created on

the surface feature and added to the Tree View
in a group named according to the surface
feature.
Each surface comparison point is automatically
linked to the surface feature upon creation.

9. In the Tree View, select the surface feature to

measure.

10. Right-click and choose Probe Measured

Comparison Points.
The Probe Measured Comparison Point
Components dialog box opens.

11. Click Probe to probe the surface comparison

points following the guidance.

Results

The surface feature and the surface comparison points are displayed as measured in the Tree
View and in the 3D scene.

217
SURFACE FEATURES MEASURE

By probing new surface comparison points

Objective: Measure a surface feature by probing new surface comparison points in real time.

Required: The project must contain a Reference object and a surface feature, and the
probing device must be aligned to the Reference object.

Steps

1. In the Tree View, select a surface feature.

2. Right-click and choose Probe New Comparison
Points.

The Create Surface Comparison Points dialog

box opens. The Method is set to Probe and the
Link to object information is automatically set.
3. Specify the Radius.
4. Click Probe.
5. Probe new surface comparison points on the
corresponding surface.

The surface feature is automatically highlighted

in the 3D scene to guide the probing of the
surface comparison points.

218
SURFACE FEATURES MEASURE

Results

The surface feature is measured. The surface comparison points are created, measured,
linked to the surface feature and added to the Tree View in a group named according the
surface feature.

219
SURFACE FEATURES MEASURE

From data points

Objective: Create measured surface components interactively using data elements.

Required: The project contains a Data object.

Steps

1. Choose Measure > Features > Create.

The Create Features dialog box opens.

2. Expand the feature type drop-down menu and

choose Surface.
3. In the Method list, select From Data Points.

4. Choose Select > Elements > Interactively.

5. In the 3D scene, select the elements that will

be used to fit the surface.
See Selecting elements on page 45 for
information on how to select elements
interactively.
6. Click Create to create the feature using the
selected elements.

220
SURFACE FEATURES MEASURE

Tips
To define the measured component of an existing feature, select the feature in the Tree View
and choose Measure > Features > Define Measured.

Results

The surface feature is added to the Tree View,

under the Features branch. Surface features
created from data points have no display in the
3D scene.

221
SLAB FEATURES MEASURE

Creating slab features

Use slab features to obtain measurements on grooves or keyways with parallel sides.
Objective: Create a slab between two parallel planes.

Required: The project contains two parallel plane features having opposite orientations.

Steps

1. Choose Measure > Features > Create.

The Create Slab Features dialog box opens.

2. Expand the feature type drop-down menu and

choose Slab.

3. Specify a Name and assign a Datum feature

label, if needed.
4. Choose a 1st plane and a 2nd plane between
which to create the slab.
If two features are selected prior to accessing
the creation dialog box, the fields are
automatically populated.
The nominal planes must be parallel and have
opposite orientations.
5. Click Create.

222
SLAB FEATURES MEASURE

Results

The slab feature is added to the Tree View, The slab feature is displayed in the
under the Features branch. 3D scene.

Notes

The slab feature is dependent on the two source features. If, for any reason, they are
modified, the slab feature is automatically updated.

If the source features contain only nominal components, therefore the slab feature only
contains a nominal component. If both source features contain measured components,
therefore the slab feature contains a measured component.

223
POLYLINE FEATURES MEASURE

Creating polyline features

Polyline features are typically created using existing objects or by data acquisition and they
generally contain a measured primitive. The nominal primitive is rarely used for the
measurement operations.

Creating nominal polyline primitives

Objective: Create a nominal polyline primitive interactively using a Reference object or a
Data object.

Required: The project contains a Reference object, a Data object, or a plane feature.

Steps

1. Choose Measure > Features > Create.

The Create Features dialog box opens.
2. Expand the feature type drop-down menu and
choose Polyline.

3. In the Method list, select Anchor.

4. Specify if the Polyline type is Open or Closed.
5. If required, select Constraining plane and
specify a standard plane or an existing plane
primitive to constrain the anchored points to a
plane.
The interactive anchoring mode is automati-
cally activated. If not, click Anchor.

224
POLYLINE FEATURES MEASURE

Left-click to anchor a point, middle-click to delete

the last anchored point, and right-click to end the
interactive picking mode.

Results

The polyline feature and its nominal primitive The primitive is displayed in the 3D scene.
are added to the Tree View, under the
Features branch.

225
POLYLINE FEATURES MEASURE

Obtaining measured polyline primitives

To obtain the measured primitive of a polyline feature, the most common method used is
Probe which is explained in the following subsection.

Probe
Objective: Create the measured polyline primitive by probing it.

Required: A probing device is ready to use.

Steps

1. Choose Measure > Features > Create.

The Create Features dialog box opens.
2. Expand the feature type drop-down menu and
choose Polyline.

3. In the Method list, select Probe.

4. Specify if the Polyline type is Open or Closed.
5. Click Probe to probe the measured polyline
primitive.
Click the How to button in the dialog box to view
the different steps required to probe the polyline.

Results

The probed measured primitive is added to the The polyline is displayed in the 3D scene.
Tree View, under the Features branch.

226
POLYLINE FEATURES MEASURE

Notes

During probing, probed points are collected

at the center of the probe tip. It is not
possible to compensate as the polyline is
probed.
It is possible to project the polyline onto a
plane or offset it to apply a compensation
on 2D polylines.

227
POLYLINE FEATURES MEASURE

Constructing polyline features

Objective: Construct a polyline feature using existing objects.

Required: The project contains existing objects required by the specified submethod.

Steps

1. Select the objects required for the construction

in the Tree View.
2. Choose Measure > Features > Create.
The Create Features dialog box opens.
3. Expand the feature type drop-down menu and
choose Polyline.

4. In the Method list, select From Objects.

5. In the Submethod list, select a submethod.
6. Click Create.
Example: The Cross-sections submethod
creates a polyline for each segment of the
selected nominal and measured cross-section.

228
POLYLINE FEATURES MEASURE

Results

The constructed polyline features are added The polyline features are displayed in the
to the Tree View, under the Features branch. 3D scene.
If the objects used have nominal and
measured components, the corresponding
polylines are created separately.

229
PATTERN FEATURES MEASURE

Creating pattern features

Patterns are created by grouping together features of the same type. The pattern is necessary
when a GD&T control is assigned to a group of features, such as it is often the case on a
Position control for holes.

Objective: Create a pattern of holes.

Required: The project contains at least two features of the same type.

Steps

1. Select the features to use in the Tree View.

2. Choose Measure > Features > Create.

The Create Features dialog box opens.
3. Expand the feature type drop-down menu and
choose Pattern.

4. Specify a Name and assign a Datum feature

label, if required.
5. Click Create.

230
PATTERN FEATURES MEASURE

Results

The pattern feature is added to the Tree View, The pattern feature is displayed in the
under the Features branch. The features are 3D scene and the annotation is attached to
grouped under the pattern feature. one of its features.

231
DISTANCE FEATURES MEASURE

Creating distance features

Use distance features to measure the distance between two existing features.

Objective: Create a distance dimension between two features.

Required: The project contains two valid features.

Steps

1. Choose Measure > Features > Create.

The Create Features dialog box opens.

2. Select Distance.

3. Choose a Reference feature and a Feature

between which to measure the distance.
Click the hand symbol adjacent to the list boxes
to pick features in the 3D scene. If two features
are selected prior to accessing the creation dialog
box, the fields are automatically populated.
When necessary, the Reference feature is
considered extended to infinity.
4. Click Create.

Results

The distance feature is added to the Tree The distance feature is displayed in the
View, under the Features branch. 3D scene.

232
DISTANCE FEATURES MEASURE

Notes

The distance feature is dependent on the source features and is automatically updated if
the source features are modified.
If the source features have a nominal component, the resulting distance feature has also a
nominal component. If all the source features have a measured component, the resulting
distance feature also has a measured component.

233
ANGLE FEATURES MEASURE

Creating angle features

Use angle features to measure the angle between two existing features.

Objective: Create an angle dimension between two features.

Required: The project contains two features.

Steps

1. Choose Measure > Features > Create.

The Create Features dialog box opens.

2. Select Angle.

3. Choose a Reference feature and a Feature

between which to measure the angle.
Click the hand symbol adjacent to the list boxes
to pick features in the 3D scene. If two features
are selected prior to accessing the creation dialog
box, the fields are automatically populated.
When necessary, the Reference feature is
considered extended to infinity. The
measurement is calculated from the Reference
feature to the Feature.
4. Click Create.

Results

The angle feature is added to the Tree View, The angle feature is displayed in the 3D
under the Features branch. scene.

234
ANGLE FEATURES MEASURE

Notes

The angle feature is dependent on the source features and is automatically updated if the
source features are modified.
If the source features have a nominal component, the resulting angle feature also has a
nominal component. If all the source features have a measured component, the resulting
angle feature also has a measured component.

235
EDITING FEATURE PRIMITIVES MEASURE

Editing feature primitives

Once a measured primitive has been probed, it can be
reviewed and edited to refine the measured value. For
example, it is possible to select the measured data points used
to create the primitive, edit the measured data points to see
the coordinates and fitting errors of each point, add probed
data points to an existing primitive or set measured primitive
boundaries using the nominal primitive.

Note that other feature editing tools are available on the Measure > Feature Primitives menu. A
feature can also be edited by adjusting parameters on the Measurement tab of its properties.

Selecting data points of measured primitives

It is useful to highlight the data points used in calculating a
measured primitive or its constraining plane. The selection
shows if unwanted data points have been included. This
allows making adjustments and recalculating the measured
primitive.

Objective: View the points used to fit the measured feature component.

Required: The project contains a Data object and a measured feature.

Steps

1. Select a feature in the Tree View and choose

Select > Data Points > Measured Data Points.

2. To view the points used for the constraining

plane of a curve-based feature, choose Select >
Data Points > Measured Data Points of Local
Planes.

Results

The data points used to calculate the If specified, the data points used to calculate
measured primitive are selected in the 3D the constraining plane of the measured
scene. primitive are selected in the 3D scene.

Circle 1 Circle 1 constraining plane

236
EDITING FEATURE PRIMITIVES MEASURE

Editing the measured points of feature primitives

The Edit measured points interface can be used to review the
exact fitting statistics of each point probed for the measured
feature component. If necessary, individual points can be
removed from the solution to improve the overall result.
Additionally the interface allows review and correction of
probing compensation and constraints.

Objective: Review probed feature point fitting statistics, remove unwanted points, and
correct compensation errors.

Required: The project contains a Data object, and a probed measured feature component.

Steps

1. Select a feature in the Tree View and choose

Measure > Feature Primitives > Edit Measured
Points.

Points tab:
2. Each point used in the probed feature
component fit is listed, with its coordinates and
deviation. Points can be sorted by column
value, by clicking on the column header.

3. Under Fit statistics, a summary of current and

initial fitting values is displayed.

4. In the Fit parameters section, the fitting

parameters used for probing are shown.

5. To remove points from the fitting solution,

clear them in the list, or right-click and choose
Ignore. The current fit statistics will update.

6. Click Apply.

237
EDITING FEATURE PRIMITIVES MEASURE

Probing parameters tab:

7. The probe Tip diameter can be adjusted if

incorrect.

8. The Constraining plane parameter and the

plane used for curve-based features can be
redefined.

9. The Compensation, if incorrectly performed,

can be reversed.

10. Click Apply.

Results

The Fit statistics are updated to display the The probed feature component is updated.
current fitting summary.

238
EDITING FEATURE PRIMITIVES MEASURE

Adding points to a feature

If a probed feature contains too few points for the desired
inspection, more points can be added and incorporated into
the probed feature fitting solution. Adding probed points is
useful in creating a more robust feature fit, or to continue
defining a very large feature from a later device position.

Objective: Add additional probed points to a measured feature component.

Required: The project contains a Data object, and a probed feature.

Steps

1. Select the feature in the Tree View and choose

Measure > Feature Primitives > Add Probed Data
Points.

2. Specify the required Point acquisition

parameters.

3. Click Probe.

Results

The probed feature component is updated to

include the newly-probed points.

239
EDITING FEATURE PRIMITIVES MEASURE

Setting measured feature boundaries using the nominal component

In some cases, a measured feature component cannot have
the same extent as the nominal component. For instance, a
pin is used to define a nominal hole, so the measured
component is above the nominal hole boundary. It is then
useful to adjust the measured feature component to fit within
the nominal component boundaries. This functionality is
available for surface-based features.

Objective: Set the measured feature extent to match the nominal feature component extent.

Required: A Data object, a surface feature with a nominal and measured component.

Steps

1. Select a feature in the Tree View and choose

Measure > Features > Set Measured Boundaries
using Nominal.
Alternatively, right-click the feature in the Tree
View and choose Edit > Set Measured Boundaries
using Nominal.

Results

The measured feature originally had the After processing, it is extended to the
extent of the probed data points. boundaries of the nominal feature
component.

Nominal Nominal

Measured Measured

240
EXPORTING FEATURES MEASURE

Exporting feature primitives

Most nominal and measured primitives can be exported for
use outside of PolyWorks. All features, except for angles,
distances, surfaces, and slabs, can be exported as an IGES file.
Points, lines, planes, circles, and polylines can also be exported
in text format.

Objective: Export primitives as an IGES file.

Required: The project contains features.

Steps

1. Select features to export in the Tree View and

choose File > Export > Features.

2. Click Options.
3. Specify which feature components to export,
either Nominal, Measured, or both.
4. Click OK.

5. Navigate to the desired file-saving location.

6. Name the file.
7. Click Save.

Results

The selected primitives are saved to an IGES

file and can be opened in another software
package.

241
Cross-sections
Standard cross-sections

242
CROSS-SECTIONS MEASURE

Inspecting 2D part profiles with cross-sections

Cross-sections are measurement tools used for 2D inspection
of surfaces. They allow calculating deviations along profiles
obtained from slicing planes.

Introducing cross-sections
Cross-sections are used to inspect a profile of a part along a
cross-sectional plane using the nominal geometry and the geometry of the part in order to
produce results determined by geometry controls. The nominal geometry is obtained by
intersecting the Reference object with a slicing plane. The part geometry is obtained by
probing the part at the sectioning location. The Reference object and the part must be aligned.

Cross-sections can be created along an axis, around an axis (radially), along a curve, or using
several other methods.

Cross-sections are available on the Measure > Cross-Sections menu or on the Cross-
Sections toolbar.

Types of cross-sections
There are two types of cross-sections:

Standard cross-sections
A standard cross-section is created by
intersecting the Reference object with
a slicing plane delimited by a
measurement zone and probing it
afterwards to obtain the part
deviation.

Offset cross-sections
An offset cross-section is created by
intersecting aligned Reference and
Data objects with parallel slicing
planes to produce a single multistep
cross-section. Offset cross-sections
are useful in controlling 2D dimen-
sions defined between features
situated on different slicing planes.
Offset cross-sections cannot be
probed and are therefore not
documented in this manual.

243
CROSS-SECTIONS MEASURE

Measurement zone
The measurement zone defines the 3D limits of the slicing
process, delimiting a slicing plane. As shown to the right, it
is represented by a blue rectangle with red corners. The
dimensions of the measurement zone are defined during
cross-section creation, and can be edited by dragging
rectangle sides.

Measurement method
The measurement method used to obtain the part geometry is Probe which involves probing
the part geometry on the part that is within the measurement zone.

Display options
A number of display options are available to visualize cross-sections with captured nominal
and part geometry.

They are offered in the Object Display Options.

Under Cross-sections, several display options are

offered. They are only available when Color map is
selected.

Color map
Displays the deviation of the measured
geometry to the nominal geometry. Note that
the color map display can be customized. For
information, see Changing the color map display
on page 111.

Tolerance curves Tolerance +

Displays the cross-section with respect to the
tolerances of the Reference object, allowing a
pass/fail representation. Tolerance -

Deviation vectors
Displays the direction and amplitude of the
deviations.
Increasing the Scaling factor increases the
length of the deviation vectors for better
visibility.

244
STANDARD CROSS-SECTIONS MEASURE

Creating standard cross-sections

A cross-section is a measurement object. It is created to obtain
the deviation along a cross-sectional plane. The geometry of
the part can be obtained by probing the physical part.

Getting the nominal geometry

In IMInspect Probing, the nominal geometry of a
measurement object is called its nominal component, and the geometry obtained from the
part is called its measured component.

Objective: Start inspecting a part along a 2D profile by creating a cross-section to capture the
nominal component.

Required: The project contains a Reference object.

Steps

1. Choose Measure > Cross-Sections > Create >

Standard Cross-Sections.
The Create Cross-Sections dialog box opens.

2. Choose a creation Method.

The creation of cross-sections using the most
frequently used methods follows.
All of the possible creation methods are shown
to the right.

245
STANDARD CROSS-SECTIONS MEASURE

Along Standard Axis

This method allows creating a cross-section perpendicular to a standard system axis, such as
the X axis. It is recommended to have a properly oriented coordinate system to obtain the
anticipated results.

1. In the Method list, select Along Standard

Axis.

2. Under Axis, select X, Y, or Z.

The cross-section will be positioned along and
perpendicular to the axis.

3. Under Mode, select Individual to create a

single cross-section.
The Multiple mode allows creating evenly
spaced cross-sections at a specified step either
within a range or by slicing whole objects.
4. Under Position, specify a position along the
axis using one of these methods:
Numerically, by typing a value.
Manually, by clicking Anchor Point, then
picking a location on an object in the 3D
scene.
5. Click Preview.
A preview of the measurement zone of the
cross-section is displayed in the 3D scene.
The preview is displayed automatically when
anchoring a point.
Right-click to exit the anchoring mode.
6. To resize the measurement zone to include
only the area of interest, drag the blue
borders.

7. Click Create.

246
STANDARD CROSS-SECTIONS MEASURE

Along Curve

This method allows creating a cross-section perpendicular to a curve. It involves specifying the
type of curve to use, and then specifying the location of the cross-section along the curve.

1. In the Method list, select Along Curve.

2. Under Curve, select From reference object

curves.
The cross-section will be positioned along and
perpendicular to a curve on the Reference
object.
From polyline allows cross-sections to be
located either along an existing polyline feature,
or by interactively anchoring a polyline.

3. Under Mode, select Individual to create a

single cross-section.
The Multiple mode allows creating evenly
spaced cross-sections at a specified step either
within a range or by slicing whole objects.

4. Under Position, click Anchor Point.

An interactive anchoring mode is launched.

5. Anchor a point along the curve by picking a

point on the Reference object in the 3D
scene. Right-click to exit the anchoring mode.
If At intersection with plane is selected, only
the location of the intersection of the curve and
the chosen standard plane can be picked.
A measurement zone is displayed.

6. To resize the measurement zone to include

only the area of interest, drag the blue
borders.

7. Click Create.

247
STANDARD CROSS-SECTIONS MEASURE

Tips
Cross-sections can be created along a whole curve or just using a portion of the curve. When
the Mode is set to Multiple, two anchoring modes become available:

Whole curve: Cross-sections are created along the entire length of the curve.
Partial curve: Cross-sections are created between the specified start and end point on the
curve. Click a first point on the curve to indicate the start point and click a second point to
indicate the end point.

248
STANDARD CROSS-SECTIONS MEASURE

Radial

This method allows creating a cross-section that radiates from an axial primitive, such as a
cylinder or cone.

1. In the Method list, select Radial.

2. Under Rotation axis, select in the Axial

primitive list a feature with an axis, such as a
cone or a cylinder.
The cross-section will be positioned radially,
originating from the selected axis.

3. Set the mode to Individual to create a single

cross-section.
The Multiple mode allows creating evenly
spaced cross-sections at a specified angular
step either within a range or by slicing whole
objects.

4. Under Position, specify a position using one

of these methods:
Numerically, by typing a value.
Manually, by clicking Anchor Point, then
picking a location on an object in the 3D
scene.
5. Click Preview.
A preview of the measurement zone of the
cross-section is displayed in the 3D scene.
The preview is displayed automatically when
anchoring a point.
Right-click to exit the anchoring mode.
6. To resize the measurement zone to include
only the area of interest, drag the blue
borders.

7. Click Create.

249
STANDARD CROSS-SECTIONS MEASURE

Anchor

This method allows creating a cross-section by anchoring a line in the 3D scene.

1. In the Method list, select Anchor.

2. Under Mode, select Individual to create a

single cross-section.
The Multiple mode allows creating evenly
spaced cross-sections at a specified step either
within a range or by slicing whole objects.

3. Under Position, click Anchor Line and click

two locations in the 3D scene. Right-click to
exit the anchoring mode.
A measurement zone is displayed in the 3D
scene.

4. To resize the measurement zone to include

only the area of interest, drag the blue
borders.

5. Click Confirm.

Results

The new cross-section, with a nominal The cross-section is displayed in the 3D scene
component, is added to the Tree View under along with a color scale showing the
the Cross-Sections branch. deviations (requires both the nominal and
the measured component to obtain results).

Notes

The measurement zone of a cross-section can be edited post creation by following these
steps:
1. Select the cross-section in the Tree View.

250
STANDARD CROSS-SECTIONS MEASURE

2. Choose Measure > Cross-Sections > Edit

Measurement Zones.

3. The measurement zone is displayed in the

3D scene and can be edited by dragging the
borders.
4. Press ESC to exit the editing mode.

251
STANDARD CROSS-SECTIONS MEASURE

Measuring the geometry on the part

For an existing cross-section, the corresponding geometry on the part can be obtained by
probing a physical part. The digitizing device must be aligned to the Reference object. In
IMInspect Probing, the geometry obtained on the part is called the measured component of the
measurement object.

Probe the geometry

The geometry for a profile on the part can be obtained by probing the measured component
of a cross-section. The probed points are projected onto the plane defined by the
measurement zone of the cross-section. Subsequently, the projected points are joined by a
polyline to define the measured component of the cross-section.

Objective: Finish inspecting the profile for an existing cross-section by probing the
corresponding part geometry to obtain the measured component of the cross-
section.

Required: The project contains a Reference object and a cross-section with a nominal
component. The probing device is aligned to the Reference object.

Steps

1. In the Tree View, select the cross-section.

2. Choose Measure > Cross-Sections > Probe
Measured.

252
STANDARD CROSS-SECTIONS MEASURE

The Probe Measured Cross-Section

Component dialog box opens.
3. Under Sectioning plane, click Use and
choose a cross-section from the list.
By default, the probe Compensation is
calculated using the closest Reference object.
4. Under Probing method, select Projection.
All points acquired within the specified
projection Distance of the plane are used to
create the measured cross-section component.
The Max point-to-point distance determines
how close the probed points must be spaced to
be used to generate the measured cross-section.

5. Click Probe.
Use the visual and audio guidance to move the
probe to the cross-section location. Once within
the cross-section projection distance, probing is
allowed.

Tip
Use the Continuous Time or Continuous
Distance probing mode to facilitate the probing.

Results

The measured component is added to the The cross-section is displayed in the 3D scene
cross-section. The green check overlays the along with a color scale showing the
object icon indicating its measured status. deviations.

253
STANDARD CROSS-SECTIONS MEASURE

Notes

Probing can also be done without an existing cross-section by using the Probe 2 points
method to define the location of the sectioning plane.

The Zig-zag probing method is another way to probe the geometry of the part.
Each probed point must be captured on alternating sides of the sectioning plane. The
plane changes color from blue to orange to indicate which side of the plane the probe is
currently on. The intersection of the sectioning plane with the line connecting the currently
probed point and the last probed point determines the acquired point.

Additional probed points can be added to the probed measured

component of a cross-section to better capture the part
geometry. Select the cross-section in the Tree View and choose
Measure > Cross-Sections > Add Probed Data Points.

254
Comparison points
Surface comparison points

Trimmed edge comparison points

Hemmed edge comparison points

255
COMPARISON POINTS MEASURE

Measuring specific locations on a part using

comparison points
A comparison point contains an exact coordinate, usually located on a CAD object, at which
the data deviation is to be measured. These coordinates can be entered numerically, or
generated by anchoring, sampling the CAD object, imported from a text file, or created by way
of several other methods. Comparison points can be positioned on a part surface or curve, or
along cross-sections or polylines. Surface comparison points are the most common.

Introducing comparison points

There are five types of comparison points, each one tailored to calculate deviations in a
specific context. The following sections explain the types of comparison points that are most
frequently used.

Comparison points are available on the Measure > Comparison Points menu or on the
Comparison Points toolbar.

Types of comparison points

Each type of comparison point is identified by a specific icon.

Surface comparison points

Trimmed edge comparison

points

Hemmed edge comparison

points

256
COMPARISON POINTS MEASURE

Cross-section comparison
points

Polyline comparison points

Comparison point creation and measurement methods

A comparison point is a measurement object that contains nominal and measured
information in order to obtain results.

The nominal component contains the exact coordinate at which the deviation is measured.
It is created using different creation methods. The sections that follow explain the most
frequently used methods.
The measured component is created by probing the part. If the probe is within the
measurement zone, a measurement is taken when the trigger is pressed. The Probe
measurement method is presented in the sections that follow.

Understanding key parameters

Radius
Each comparison point has a measurement zone, circular by default, within which measure-
ments will be collected. The measurement zone has a radius, which is the radius of the disc.

The radius is specified during the creation

of comparison points, and can be edited in Radius
their properties along with other filtering
criteria and tolerances.

257
COMPARISON POINTS MEASURE

Display options
A number of display options are available to modify the way comparison points are
represented.

They are offered in the Object Display Options.

Under Comparison points, several display options

are offered.

By default, Color map is selected to display

measured comparison points according to their
deviation color on the color scale. If cleared,
measured comparison points are displayed
using their object color. Note that the color
map display can be customized. For more
information, see Changing the color map display
on page 111.

By default, Disc or line is selected to allow

specifying the size of the displayed reference
disc or line. If cleared, only the center
coordinate is displayed. Disc

Line

Select Deviation vector to view the direction of

deviation. Increasing the Scaling factor
increases the length of the deviation vector for
better visibility.

258
SURFACE COMPARISON POINTS MEASURE

Creating surface comparison points to inspect the surface

of a part
A surface comparison point is a measurement object. It is created
to obtain the deviation on a surface, at specific coordinates. The
geometry of the surface can be obtained by probing the
measured component of the surface comparison point.

If creating by probing, the nominal component is automatically

extracted on the closest Reference object. The digitizing device
must be aligned to the Reference object.

Getting the nominal geometry

In IMInspect Probing, the nominal geometry of a measurement object is called its nominal
component, and the geometry obtained from the part is called its measured component.

Objective: Create surface comparison points to capture the nominal component.

Required: The project contains a Reference object.

Steps

1. Choose Measure > Comparison Points > Create >

Surface Points.
The Create Surface Comparison Points dialog
box opens.

2. Choose a Method among the following.

The creation of surface comparison points using

the most common methods follows.
All creation methods are shown to the right.

259
SURFACE COMPARISON POINTS MEASURE

Anchor
This method allows creating surface comparison points by anchoring on surfaces.

1. In the Method list, select Anchor.

2. Enter the Radius of the measurement zone for
each comparison point. See Understanding key
parameters on page 257.
3. If required, select Link to object to bind
surface comparison points to a Reference
object or a surface feature. Then, specify
whether the comparison points are linked to
the closest object/feature or to a specific one.
4. Click Anchor.
5. In the 3D scene, click a location on the model to
place the comparison point.
6. Right-click to exit the anchor mode.

Numerically
This method allows creating surface comparison points by entering values for certain
geometrical properties.

1. In the Method list, select Numerically.

2. Under Point, enter the coordinates of the point
to create.
If one coordinate is missing, select the Project
option to get the missing coordinate. The
coordinate is calculated by projecting the point
onto the Reference surface along the axis corre-
sponding to the missing coordinate.
3. Specify the Surface normal information of the
point.
By default, Automatic is selected. It extracts
the normal information from the closest point
on the surface of the reference object. To
specify values manually, the option must be
disabled.
4. Enter the Radius of the measurement zone for
each comparison point. See Understanding key
parameters on page 257.
5. If required, select Link to object to bind
surface comparison points to a Reference
object or a surface feature. Then, specify
whether the comparison points are linked to
the closest object/feature or to a specific one.
6. Click Create.

260
SURFACE COMPARISON POINTS MEASURE

Sample using Grid

This method allows creating uniformly spaced surface comparison points by sampling a virtual
grid that covers the selected or visible surfaces of Reference objects.

1. In the Method list, select Sample using Grid.

2. Specify the Sampling step that determines the
comparison point spacing.
3. Specify the Projection axis, which means the
direction in which the comparison points will be
projected on the model.
4. Enter the Radius of the measurement zone for
each comparison point. See Understanding key
parameters on page 257.
5. Under Link to object, specify whether surface
comparison points will be bound to a Reference
object or a surface feature. Then, specify
whether the comparison points are linked to
the closest object/feature or to a specific one.
6. Under Considered reference surfaces, select
whether the grid is to be sampled on all of the
visible surfaces of the Reference object or on
the selected surfaces only.
7. Click Preview.
A preview of the comparison point layout is
presented in the 3D scene.
8. Click Confirm.

From Text File

This method allows creating surface comparison points from values contained in text files. If
the new comparison points are not located on a Reference object, they can be projected onto
the nearest linked Reference object.

1. In the Method list, select From Text File.

2. Enter the Radius of the measurement zone for
each comparison point. See Understanding key
parameters on page 257.
3. If required, select Link to object to bind
surface comparison points to a Reference
object or a surface feature. Then, specify
whether the comparison points are linked to
the closest object/feature or to a specific one.
4. Click Browse.

261
SURFACE COMPARISON POINTS MEASURE

5. Navigate to a text file containing the x, y, z

coordinates of the desired measurement
locations.
The Import Parameters dialog box opens.
6. In the file browser, select a Template that
corresponds to the file structure. A preview of
the file is presented giving feedback if the
chosen template is incorrect.
7. Click OK.

Results

The new comparison points, with a nominal The comparison points are displayed in the
component, are added to the Tree View 3D scene.
under the Comparison Points branch.

262
SURFACE COMPARISON POINTS MEASURE

Measuring the geometry on the part

For an existing surface comparison point, the corresponding geometry on the part can be
obtained by probing a physical part. The digitizing device should be aligned to the Reference
object. In IMInspect Probing, the geometry obtained on the part is called the measured
component of the measurement object.

Probe the geometry

The geometry of the surface on the part can be obtained by probing the measured
component of a surface comparison point.

Objective: Probe the corresponding geometry on the part to obtain the measured
component of the comparison point.

Required: The project contains a Reference object and a surface comparison point with a
nominal component. A probing device is available and ready to use. The probing
device is aligned to the Reference object.

Steps

1. Select the surface comparison points to

probe in the Tree View.

2. Choose Measure > Comparison Points > Define

Measured.
The Define Measured Comparison Point
Components dialog box opens.

3. Specify the probing mode:

Specific: Allows probing the selected
comparison points following the Tree View
order.
Auto-detect: Allows probing the
comparison point closest to the probing
device. Only the selected comparison
points will be detected.

263
SURFACE COMPARISON POINTS MEASURE

4. Click Probe.

Tips
When probing comparison points, visual and audio feedback are provided. If the probe is out
of the measurement zone, the display color of the comparison point disc is red and the
farther the probe is from the comparison point the slower the sound is. Moving towards the
comparison point will accelerate the sound. Once the measurement zone is reached, the
display color of the comparison point disc will change to green and the sound will change to a
higher pitch which eventually stops indicating the location of the probing device is good
enough to acquire data.

Results

A probing session Data object is added to the The surface comparison points are displayed
Tree View and a green check overlays the in the 3D scene with a solid measurement
object icon indicating the measured status of zone. The color of the comparison points
the surface comparison points. corresponds to the defined color scale.

264
TRIMMED EDGE COMPARISON POINTS MEASURE

Creating trimmed edge comparison points to inspect

sharp edges of a part
A trimmed edge comparison point is a measurement
object. It is created to obtain the deviation on an
edge, at specific coordinates. The geometry of the
part can be obtained by probing the measured
component of the trimmed edge comparison point.

If creating by probing, the nominal component is

automatically extracted on the closest Reference object. The digitizing device must be aligned
to the Reference object.

Getting the nominal geometry

In IMInspect Probing, the nominal geometry of a measurement object is called its nominal
component, and the geometry obtained from the part is called its measured component.

Objective: Create trimmed edge comparison points to capture the nominal component.

Required: The project contains a Reference object.

Steps

1. Choose Measure > Comparison Points > Create >

Trimmed Edge Points.
The Create Trimmed Edge Comparison Points
dialog box opens.

2. Choose a Method among the following.

The creation of trimmed edge comparison points

using the most common methods follows.
All creation methods are shown to the right.

265
TRIMMED EDGE COMPARISON POINTS MEASURE

Anchor
This method allows creating trimmed edge comparison points by anchoring on a Reference
object curve.

1. In the Method list, select Anchor.

2. Specify the Radius of the measurement zone
for each comparison point. See Understanding
key parameters on page 257.
3. Click Anchor.

4. In the 3D scene, click an edge curve to anchor

the trimmed edge comparison points
5. Right-click to exit the anchor mode.

266
TRIMMED EDGE COMPARISON POINTS MEASURE

Sample Reference Curve

This method allows creating uniformly spaced trimmed edge comparison points by sampling
curves of Reference objects using a step.

1. In the Method list, select Sample Reference

Curve.
2. Specify the Sampling step. This parameter sets
the distance between comparison points along
the reference curve.
3. Specify the Radius of the measurement zone
for each comparison point. See Understanding
key parameters on page 257.
4. Select the Range:
Whole Curve: This option, selected by
default, enables creating comparison points
along the whole curve.
Partial Curve: This option enables creating
comparison points along a portion of the
curve.
5. In the 3D scene, click the reference curve to
select it. A preview is displayed to show where
the comparison points will be located.
If the Partial Curve range option is selected,
two clicks are required: the start and the end
point of the range.
6. Click Confirm.

267
TRIMMED EDGE COMPARISON POINTS MEASURE

Results

The new comparison points, with a nominal The comparison points are displayed in the
component, are added to the Tree View 3D scene.
under the Comparison Points branch.

Notes

By default, when creating trimmed edge

comparison points, a back point is created.
The back point is a surface comparison point
offset from the part edge.

The back point locates the actual part surface

before extracting the edge measurement,
ensuring that deformation of the actual part
shape does not prevent edge inspection.

If back points are not desired, the option can

be disabled under the More section of the
creation dialog box.

268
TRIMMED EDGE COMPARISON POINTS MEASURE

Measuring the geometry on the part

For an existing trimmed edge comparison point, the corresponding geometry on the part can
be obtained by probing a physical part. The digitizing device should be aligned to the
Reference object. In IMInspect Probing, the geometry obtained on the part is called the
measured component of the measurement object.

Probe the geometry

The geometry of the sharp edge on the part can be obtained by probing the measured
component of a trimmed edge comparison point.

Objective: Probe the corresponding geometry on the part to obtain the measured
component of the comparison point.

Required: The project contains a Reference object as well as a trimmed edge comparison
point with a nominal component and its back point. The probing device is aligned
to the Reference object.

Steps

1. Select the trimmed edge comparison points

to probe in the Tree View.

2. Choose Measure > Comparison Points > Define

Measured.
Alternatively, right-click the selected
comparison points in the Tree View and
choose Probe Measured.
The Defined Measured Comparison Point
Components dialog box opens.

269
TRIMMED EDGE COMPARISON POINTS MEASURE

3. Specify the probing mode:

Specific: Allows probing the selected
comparison points following the Tree View
order.
Auto-detect: Allows probing the
comparison point closest to the probing
device. Only the selected comparison
points will be detected.
Regardless of the probing mode, you will always
be prompted to probe the back point first and
then the trimmed edge comparison point.
4. In the Method list, select Probe.

5. Click Probe.
Two points must be probed: first probe the
back point, then the corresponding trimmed
edge comparison point.

Tips
When probing comparison points, visual and audio feedback are provided. If the probe is out
of the measurement zone, the display color of the comparison point disc is red and the
farther the probe is from the comparison point, the slower the sound is. Moving towards the
comparison point will accelerate the sound. Once the measurement zone is reached, the
display color of the comparison point disc will change to green and the sound will change to a
higher pitch which eventually stops, indicating the location of the probing device is good
enough to acquire data.

270
TRIMMED EDGE COMPARISON POINTS MEASURE

Results

A probing session Data object is added to the The trimmed edge comparison points and
Tree View and a green check overlays the their backpoints are displayed in the 3D
object icon, indicating the measured status of scene with a solid measurement zone. The
the trimmed edge comparison points and color of the comparison points corresponds
their corresponding back points. to the defined color scale.

271
HEMMED EDGE COMPARISON POINTS MEASURE

Creating hemmed edge comparison points to inspect the

hemmed edges of a sheet metal part
A hemmed edge is typically found in sheet metal parts as
the result of a hemming process which consists in folding
an edge until it is flush to itself. A hemmed edge
comparison point is a measurement object. It is created to
obtain the deviation on a hemmed edge, at specific coordi-
nates. The geometry of the part can be obtained by
probing the measured component of the hemmed edge
comparison point.

Getting the nominal geometry

In IMInspect Probing, the nominal geometry of a measurement object is called its nominal
component, and the geometry obtained from the part is called its measured component.

Objective: Create hemmed edge comparison points to capture the nominal component.

Required: The project contains a Reference object.

Steps

1. Choose Measure > Comparison Points > Create >

Hemmed Edge Points.
The Create Hemmed Edge Comparison Points
dialog box opens.
2. Choose a Method among the following.

The creation of hemmed edge comparison points

using the most common methods follows.
All creation methods are shown to the right.

272
HEMMED EDGE COMPARISON POINTS MEASURE

Anchor
This method allows creating hemmed edge comparison points by anchoring on a Reference
object curve.

1. In the Method list, select Anchor.

2. Specify the Radius of the measurement zone
for each comparison point. See Understanding
key parameters on page 257.
3. Specify how the Hemmed edge radius is
measured, either by extracting the radius from
the Reference object, or by manually entering it
in the Custom field.
4. Click Anchor.

5. In the 3D scene, click the tangency curves of the

hemmed edge to anchor the hemmed edge
comparison points.
6. Right-click to exit the anchor mode.

273
HEMMED EDGE COMPARISON POINTS MEASURE

Sample Reference Curve

This method allows creating uniformly spaced hemmed edge comparison points by sampling
curves of Reference objects using a step.

1. In the Method list, select Sample Reference

Curve.
2. Specify the Sampling step. This parameter sets
the distance between comparison points along
the reference curve.
3. Specify the Radius of the measurement zone
for each comparison point. See Understanding
key parameters on page 257.
4. Specify how the Hemmed edge radius is
measured, either by extracting the radius from
the Reference object, or by manually entering it
in the Custom field.
5. Select the Range:
Whole Curve: this option, selected by
default, enables creating comparison points
along the whole curve.
Partial Curve: this option enables creating
comparison points along a portion of the
curve.
6. In the 3D scene, click the reference curve to
select it. A preview is displayed to show where
the comparison points will be located.
If the Partial Curve range option is selected,
two clicks are required: the start and the end
point of the range.
7. Click Confirm.

274
HEMMED EDGE COMPARISON POINTS MEASURE

Results

The new comparison points, with a nominal The comparison points are displayed in the
component, are added to the Tree View 3D scene.
under the Comparison Points branch.

Notes

By default, when creating hemmed edge

comparison points, a back point is created. The
back point is a surface comparison point offset
from the part edge.

The back point locates the actual part surface

before extracting the edge measurement, ensuring
that deformation of the actual part shape does not
prevent edge inspection.

If back points are not desired, the option can be

disabled under the More section of the creation
dialog box.

275
HEMMED EDGE COMPARISON POINTS MEASURE

Measuring the geometry on the part

For an existing hemmed edge comparison point, the corresponding geometry on the part can
be obtained by probing a physical part. The digitizing device should be aligned to the
Reference object. In IMInspect Probing, the geometry obtained on the part is called the
measured component of the measurement object.

Probe the geometry

The geometry of the hemmed edges on the sheet metal part can be obtained by probing the
measured component of a hemmed edge comparison point.

Objective: Probe the corresponding geometry on the part to obtain the measured
component of the comparison point.

Required: The project contains a Reference object as well as a hemmed edge comparison
point with a nominal component and its back point. The probing device is aligned
to the Reference object.

Steps

1. Select the hemmed edge comparison points

in the Tree View.

2. Choose Measure > Comparison Points > Define

Measured.
Alternatively, right-click the selected
comparison points in the Tree View and
choose Probe Measured.
The Defined Measured Comparison Point
Components dialog box opens.

276
HEMMED EDGE COMPARISON POINTS MEASURE

3. Specify the probing mode:

Specific: Allows probing the selected
comparison points following the Tree View
order.
Auto-detect: Allows probing the
comparison point closest to the probing
device. Only the selected comparison
points will be detected.
Regardless of the probing mode, you will always
be prompted to probe the back point first and
then the hemmed edge comparison point.

4. Click Probe.
Two points must be probed: first probe the
back point, then the corresponding hemmed
edge comparison point.

Tips
When probing comparison points, visual and audio feedback are provided. If the probe is out
of the measurement zone, the display color of the comparison point disc is red and the
farther the probe is from the comparison point the slower the sound is. Moving towards the
comparison point will accelerate the sound. Once the measurement zone is reached, the
display color of the comparison point disc will change to green and the sound will change to a
higher pitch, which eventually stops indicating the location of the probing device is good
enough to acquire data.

277
HEMMED EDGE COMPARISON POINTS MEASURE

Results

A probing session Data object is added to the The hemmed edge comparison points, and
Tree View and a green check overlays the their backpoints, are displayed in the 3D
object icon indicating the measured status of scene with a solid measurement zone. The
the hemmed edge comparison points and color of the comparison points corresponds
their corresponding back points. to the defined color scale.

278
Gauges

Profile gauges

Flush & gap gauges

279
GAUGES MEASURE

Measuring part dimensions with gauges

In IMInspect Probing, common physical measurement tools such as calipers, radius gauges,
and step gauges are simulated using Gauge objects. Gauges are used to measure the devia-
tions of the part geometry with respect to the nominal geometry.

There are four types of gauges, however, only two types can be probed:

Profile gauge
Profile gauges are used to measure
the radii, distances, or heights on the
fillets or rounds of a part on a cross-
sectional plane.

Flush & gap gauge

Flush & gap gauges are used to
measure the flush and gap between
parts of an assembly on a cross-
sectional plane.

Profile and flush & gap gauges are measured on linked cross-sections which are automatically
created on gauge creation.

Display options
There are display options for the visualization of the results.

1. Click Object Display Options.

2. Under Gauges:
Select Color map to display the deviation of
the measured geometry to the nominal
geometry. Note that the color map display
can be customized. For information, see
Changing the color map display on page 111.
Select the component that will be displayed:
Nominal or Measured.

280
PROFILE GAUGES MEASURE

Measuring object radii with profile gauges

The profile gauge is a useful tool to inspect radii on a part on
a cross-sectional plane.

Introducing profile gauges

The profile gauge is used to inspect a profile along a cross-
sectional plane using the nominal geometry and the
geometry of the part in order to produce results determined
by geometry controls.

Several profile gauge types are available that allow inspecting one radius at a profile, or two
radii and the distance between them.

Profile gauges are available on the Measure > Gauges menu or on the Gauges
toolbar.

Profile gauge families

There are two families of profile gauges.

One radius
This family type computes measurements
only for one radius.

Two radii
This family type computes measurements for
two radii.

Profile gauge types

There are several types of profile gauges offered for each of the two families, and certain
types obtain more accurate results in certain applications. To help choose the correct type of
profile gauge, the Visualize type usage section in the creation dialog box offers an interactive
display of the different scenarios where the selected type works.

The selection of gauges for each of the two families meets the needs of most users. In
addition, users can program their own gauges using special creation tools; this advanced
subject is not presented in this document.

281
PROFILE GAUGES MEASURE

Visualizing type usage

1. In the creation dialog box, expand the
Visualize type usage area.
2. A display of the current gauge type is shown.
3. Use the vertical scroll bar to interactively
change the display, showing the possible
scenarios supported by the selected gauge
type. If the two radii families are selected, two
scroll bars are available, one for each radius.

Creation methods
Profile gauge measurements are calculated on a
linked standard cross-section, which is created at
the same time as the profile gauge. This is why
profile gauges share the same creation methods
as standard cross-sections. The methods most
frequently used are presented in this document.

282
PROFILE GAUGES MEASURE

Creation methodology
1. Choose Measure > Gauges > Create > Profile
Gauges.
The Create Profile Gauge dialog box opens.

2. Specify an object Name, if desired.

3. Specify the gauge Family and Name.

Use the Visualize type usage to display the
possible scenarios supported by the selected
profile gauge type.

4. In the Method list, select a creation method.

5. Specify the required parameters according to

the creation method.
Method-specific parameters may include
browsing for a text file or entering point
coordinates manually.

6. Click Preview to view the measurement zone

of the profile gauge.

7. Click the appropriate button to launch or

confirm the creation of the gauges.

Display options
Display options are available for the visualization of the results.

1. Click Object Display Options.

2. Under Gauges, in the Component list, choose

Nominal or Measured.

IMInspect Probing also offers a visualization mode called Profile Gauge Navigator that
displays a single profile gauge in 2D mode, making it easier to understand the results. See
Reviewing profile gauge measurement results on page 351.

283
PROFILE GAUGES MEASURE

Creating profile gauges

A profile gauge is a measurement object. It is created to obtain, along a cross-sectional plane,
a) the nominal geometry on the Reference object, and b) the geometry of the part by probing
the part. When both geometries have been obtained, geometry controls are applied to
produce the desired results.

Getting the nominal geometry

In IMInspect Probing, the nominal geometry of a measurement object is called its nominal
component, and the geometry obtained from the part is called its measured component.

Objective: Start inspecting a profile along a cross-sectional plane by creating a profile gauge
to capture the nominal component.

Required: A Reference object.

Steps

1. Choose Measure > Gauges > Create > Profile

Gauges.
The Create Profile Gauges dialog box opens.

2. Choose a gauge Family type and Name.

To better understand how to choose the type, the

Visualize type usage section can be expanded.
In this section, all operations that the selected
type can perform are illustrated. This is for
visualization purposes only, and does not affect
the creation process.

3. Choose a Method from those that follow.

The creation of profile gauges, using the most

frequently used methods, follows.
All of the creation methods are shown to the
right.

284
PROFILE GAUGES MEASURE

Along Curve

This method allows creating profile gauges perpendicular to a curve. It involves specifying
the type of curve to use, and then specifying the location of the gauge along the curve.

1. In the Method list, select Along Curve.

2. Under Curve, select From reference object

curves to use the curves of a Reference
object.

3. Under Mode, select Individual.

If multiple profile gauges are needed, the

Multiple mode allows gauges to be spaced
evenly at a specified step along the curve.

4. Under Position, click Anchor Point.

An interactive anchoring mode is launched.

5. Anchor a point along the curve by picking a

point in the 3D scene. Right-click to exit the
anchoring mode.
If At intersection with plane is selected, only
the location of the intersection of the curve and
the chosen standard plane can be picked.
The measurement zone is displayed.

6. To resize the measurement zone to include

only the area of interest, drag the blue
borders.

7. Click Confirm.

Tips
Profile gauges can be created along a whole curve or just using a portion of the curve. When
the Mode is set to Multiple, two anchoring modes become available:

Whole curve: Profile gauges are created along the entire length of the curve.
Partial curve: Profile gauges are created between the specified start and end point on
the curve. Click a first point on the curve to indicate the start point and click a second
point to indicate the end point.

285
PROFILE GAUGES MEASURE

Along Standard Axis

This method allows creating profile gauges perpendicular to a standard system axis, such as
the X axis. It is recommended to have a properly oriented coordinate system to obtain the
anticipated results.

1. In the Method list, select Along Standard

Axis.

2. Under Axis, select X, Y, or Z.

3. Under Mode, select Individual.

If multiple profile gauges are needed, the
Multiple mode creates gauges evenly spaced at
a specified step, either within a range or by
slicing whole objects.

4. Under Position, specify the coordinate of a

point on the selected standard axis.
The value can be entered in the text box or by
clicking Anchor Point, which allows picking a
point on the Reference object in the 3D scene.

5. Click Preview.
A preview of the measurement zone of the
profile gauge is displayed in the 3D scene.
The preview is automatically displayed when
anchoring a point.
Right-click to exit the anchoring mode.

6. To resize the measurement zone to include

only the area of interest, drag the blue
borders.

7. Click Confirm.

286
PROFILE GAUGES MEASURE

Results

The new profile gauge, with a nominal The profile gauge is displayed in the
component, is added to the Tree View under 3D scene.
the Gauges > Profile branch.

Notes

Since a profile gauge is a 2D analysis, a linked cross-section is

automatically created on profile gauge creation to compute
measurements.

The measurement zone of a profile gauge can be edited post creation. Select the profile
gauge in the Tree View and choose Edit > Object Properties. The objects property sheet
opens. Open the Profile tab. Under Measurement zone, click Edit to launch the
interactive editing mode.

287
PROFILE GAUGES MEASURE

Measuring the geometry on the part

For an existing profile gauge, the corresponding geometry on the part can be obtained by
probing a physical part. The digitizing device should be aligned to the Reference object. In
IMInspect Probing, the geometry obtained on the part is called the measured component of the
measurement object.

Probe the geometry

The geometry for a profile on the part can be obtained by probing the measured component
of a profile gauge. The probed points are projected onto the plane defined by the
measurement zone of the gauge. Subsequently, the projected points are joined by a polyline
to define the measured component of the linked cross-section.

Objective: Finish inspecting the profile for an existing profile gauge by probing the
corresponding part geometry.

Required: A Reference object, a profile gauge, a probing device aligned with the Reference
object, and the part.

Steps

1. In the Tree View, select the profile gauges to

probe.

2. Choose Measure > Gauges > Probe Measured

Profile.
The Probe Measured Profile Gauge Compo-
nents dialog box opens.

288
PROFILE GAUGES MEASURE

3. In the Measurement zone area, select Use.

The selected profile gauges are available in the
adjacent list.

4. Specify a Projection distance.

Probed points within this distance from the
measurement zone are considered as valid
points to compute the measured component.

5. Specify a Max point-to-point distance.

Specifies the maximum distance between points
to be joined together by the polyline.

6. Click Probe.
Use the visual and audio guidance to move the
probe to the desired location. Once within the
profile projection distance, probing is allowed.

Results

A green check overlays the object icon The profile gauge is displayed in the
indicating the measured status of the profile 3D scene.
gauge as well as its linked cross-section.

Notes

Measured profile gauges can also be probed without having an existing profile gauge by
using the Probe 2 points method. In this case, a measurement zone must first be defined.

289
PROFILE GAUGES MEASURE

As well, no alignment is necessary for the probing device since no Reference object is
required.
If the profile gauge is created using the wrong family or name, it is possible to change
these and other gauge creation parameters. Select the gauge and choose Edit > Object
Properties. The object property sheet opens. On the Profile tab, make the desired
specifications.
It is possible to view, in 2D mode, the selected profile gauges using the Profile Gauge
Navigator. To access the navigator, choose View > Object Navigator > Profile Gauges. See
Reviewing profile gauge measurement results on page 351.

290
FLUSH & GAP GAUGES MEASURE

Measuring flush and gap with flush & gap gauges

In manufacturing, when performing an assembly, it
can be necessary to measure the flush and the gap
existing between the assembled parts to assure the
assembly meets the design requirements.

Introducing flush & gap gauges

The flush & gap gauge is used to inspect the assembly on a cross-sectional plane using the
nominal geometry and the geometry of the part in order to produce results determined by
geometry controls.

Flush & gap gauges are available on the Measure > Gauges menu or on the Gauges
toolbar.

Flush & gap gauges are organized by family, and each family can have several types
of flush & gap gauges. This selection of gauges meets the needs of most users. Users can
program their own gauges using special creation tools; this advanced subject is not covered in
this document.

Flush & gap gauge families

There are four families of flush & gap gauges: Side B is a line, Side B is made of points, Side
A and B are fillets, and Universal.

The Universal family is the most versatile one, enclosing almost every possible scenario
where both sides are fillets. Since it offers more flexibility, it is the only family that is
addressed in detail. While the types offered in the Universal family have wider applications,
the ones offered for the Side A and B are fillets family have more specific applications.

Flush & gap gauge types

The Universal family offers three standard flush and gap gauge types:

AutoDirections Universal
This type of flush and gap gauge computes
both the gap and the flush whenever A and
B side are fillets.

AutoDirections Universal Flush Only

This type of flush and gap gauge computes
only the flush whenever A and B side are
fillets.

AutoDirections Universal Gap Only

This type of flush and gap gauge computes
only the gap whenever A and B side are
fillets.

291
FLUSH & GAP GAUGES MEASURE

Visualizing type usage

Each flush & gap gauge family and combination of types address specific needs of
measurement. To help choose the correct family and type, the Visualize type usage section
in the creation dialog box offers an interactive display of the different scenarios where the
selected type works.

1. In the creation dialog box, expand the

Visualize type usage area.
2. A display of the current gauge type is shown.
3. Use the vertical scroll bar on each side to
interactively change the display, showing the
possible scenarios supported by the selected
gauge type.

Creation methods
Flush & gap gauge measurements are calculated along a linked
standard cross-section, which is created at the same time as the
flush & gap gauge. This is why flush & gap gauges use the same
creation methods as standard cross-sections. The methods most
frequently used are presented in this document.

292
FLUSH & GAP GAUGES MEASURE

Creation methodology
1. Choose Measure > Gauges > Create > Flush &
Gap Gauges.
The Create Flush & Gap Gauges dialog box
opens.

2. Specify an object Name, if desired.

3. Specify the gauge Family and Name.

Use the Visualize type usage to display the
possible scenarios supported by the selected
flush & gap gauge type.

4. Specify a creation Method.

5. Specify the required parameters according to

the creation method.
Method-specific parameters may include
browsing for a text file or entering point
coordinates manually.

6. Click Preview to view the measurement zone

of the flush and gap gauge.

7. Click the appropriate button to launch the

gauge creation.

Display options
Display options are available for the visualization of the results.

1. Click Object Display Options.

2. Under Gauges, in the Component list, choose

Nominal or Measured.

293
FLUSH & GAP GAUGES MEASURE

IMInspect Probing also offers a visualization mode called Flush & Gap Gauge Navigator that
displays a flush & gap gauge in 2D mode, making it easier to read the results. See Reviewing
flush & gap gauge measurement results on page 353.

Typical flush and gap analysis

The figure below illustrates the flush and the gap measured on the part.

Measured
flush

Measured gap
Reference
Side A Side B Data
(definition side)

294
FLUSH & GAP GAUGES MEASURE

Creating flush & gap gauges

A flush & gap gauge is a measurement object. It is created to obtain, along a cross-sectional
plane, a) the nominal geometry on the Reference object, and b) the geometry of the part, by
probing it. When both geometries have been obtained, geometry controls are applied to
produce the desired results.

Getting the nominal geometry

In IMInspect Probing, the nominal geometry of a measurement object is called its nominal
component, and the geometry obtained from the part is called its measured component.

Objective: Start inspecting the flush & gap on an assembly by creating a flush & gap gauge to
capture the nominal component.

Required: A Reference object assembly, or separate Reference objects properly aligned to

each other.

Steps

1. Choose Measure > Gauges > Create > Flush & Gap
Gauges.
The Create Flush & Gap Gauges dialog box
opens.

2. Choose the Family type and the name.

Use the Visualize type usage section to better

understand how to choose the type. The
operations that the selected type performs are
illustrated. This is only for visualization purposes
and does not affect the creation process.

3. Choose the creation Method from the

methods that follow.
The creation of flush & gap gauges, using the
methods most often used, follows.

All of the creation methods are shown to the right.

295
FLUSH & GAP GAUGES MEASURE

Along Curve

This method allows creating flush & gap gauges perpendicular to a curve. It involves specifying
the type of curve to use, and then specifying the location of the gauge along the curve.

1. In the Method list, select Along Curve.

2. Under Curve, select From reference object

curves to use the curves of a Reference object.

3. Under Mode, select Individual.

The Multiple mode allows creating evenly spaced
flush & gap gauges at a specified step either
within a range or by slicing whole objects.

4. Under Position, click Anchor Point.

An interactive anchoring mode is launched.

5. Anchor a point along the curve by picking a

point on the Reference object in the 3D scene.
Right-click to exit the anchoring mode.

If At intersection with plane is selected, only the

point where the curve and the specified standard
plane intersect can be picked.
The measurement zone is displayed.

6. To resize the measurement zone to include

only the area of interest, drag the blue borders.

7. Click Confirm.

296
FLUSH & GAP GAUGES MEASURE

Tips
Flush & gap gauges can be created along a whole curve or just using a portion of the curve.
When the Mode is set to Multiple, two anchoring modes become available:
Whole Curve:
Flush & gap gauges are created along the entire
length of the curve.

Partial Curve:
Flush & gap gauges are created between the
specified start and end points on the curve.
Click a first point to indicate the start point, and
click a second point to indicate the end point
on the curve.

Along Standard Axis

This method allows creating flush & gap gauges perpendicular to a standard axis. It is recom-
mended to have a properly oriented coordinate system to obtain the anticipated results.

1. In the Method list, select Along Standard Axis.

2. Under Axis, select X, Y, or Z.

3. Under Mode, select Individual.

The Multiple mode allows creating evenly spaced
flush & gap gauges at a specified step either
within a range or by slicing whole objects.

4. Under Position, specify the coordinate of a

point on the selected standard axis.

The value can be entered in the text box or by

clicking Anchor Point, which allows picking a
point on the Reference object in the 3D scene.
5. Click Preview.

297
FLUSH & GAP GAUGES MEASURE

A preview of the measurement zone of the

flush & gap gauge is displayed in the 3D scene.
The preview is automatically displayed when
anchoring a point.
Right-click to exit the anchoring mode.

6. To resize the measurement zone to include

only the area of interest, drag the blue borders.

7. Click Confirm.

From Text File

It is possible to create the flush & gap gauges from predefined points by importing them from
a text file.

1. In the Method list, select From Text File.

2. Specify the File contents:

Ordered Points: the file contains a list of
ordered consecutive points.
Points & Gap Vectors: the file contains a set
of points and gap vectors, and optionally
flush vectors.

298
FLUSH & GAP GAUGES MEASURE

3. Under Position, specify the path of the text file

to be used. If the file content has been set to
Ordered Points, additional information must
be specified:
Number of gauges per curve segment:
specifies the number of gauges to create
along each curve segment (line joining two
consecutive points).
Distance between gauges: specifies the
spacing between gauges along the curve.

4. Click Preview.
A preview of the measurement zone of the
flush & gap gauge is presented in the 3D scene.

5. To resize the measurement zone to include

only the area of interest, drag the blue borders.

6. Click Confirm.

Results

The new flush & gap gauge, with a nominal The flush & gap gauge is displayed in the
component, is added to the Tree View under 3D scene.
the Gauges > Flush & Gap branch.

299
FLUSH & GAP GAUGES MEASURE

Notes

Since a flush & gap gauge is a 2D analysis, a linked cross-section is

automatically extracted on flush & gap gauge creation to
compute measurements.

The measurement zone of a flush & gap gauge can be edited post creation. Select the flush
& gap gauge in the Tree View and choose Edit > Object Properties. The objects property
sheet opens. Open the Flush & gap tab. Under Measurement zone, click Edit to launch
the interactive editing mode.

Measuring the geometry on the part

For an existing flush & gap gauge, the corresponding geometry of the part can be obtained by
probing a physical part. The digitizing device must be aligned to the Reference object. In
IMInspect Probing, the geometry obtained on the part is called the
measured component of the measurement object.

Probe the geometry

The geometry for a flush and gap on the part can be obtained by probing the measured
component of a flush & gap gauge. The probed points are projected onto the plane defined by
the measurement zone of the gauge. Subsequently, the projected points are joined by
polylines to define the measured component of the linked cross-section.

Objective: Obtain the gauges measured component by probing the corresponding part
geometry.

Required: A Reference object, a flush & gap gauge, a probing device aligned with the
Reference object, and the part.

Steps

1. In the Tree View, select the flush & gap

gauges to probe.

2. Choose Measure > Gauges > Probe Measured

Flush & Gap.
The Probe Measured Flush & Gap Gauge
Components dialog box opens.

300
FLUSH & GAP GAUGES MEASURE

3. In the Measurement zone area, select Use.

The selected flush & gap gauges are available in
the adjacent list.

4. Specify a Projection distance.

Probed points within this distance from the
measurement zone are considered as valid
points to compute the measured component.

5. Specify a Max point-to-point distance.

Specifies the maximum distance between points
to be joined together by the polyline.

6. Click Probe.
Use the visual and audio guidance to move the
probe to the desired location. Once within the
projection distance, probing is allowed.
Measuring the flush and gap requires probing
two sides and each side is probed in a separate
step.

301
FLUSH & GAP GAUGES MEASURE

Results

A green check overlays the object icon The flush & gap gauge is displayed in the
indicating the measured status of the flush 3D scene.
& gap gauge as well as its linked cross-
section.

Notes

Measured flush & gap gauges can also be probed without having an existing flush & gap
gauge by using the Probe 2 points method. In this case, a measurement zone must first
be defined. Moreover, no alignment is necessary for the probing device since no Reference
object is required.
If the flush & gap gauge is created using the wrong family or name, it is possible to change
these parameters as well as other gauge creation parameters. Select the gauge and
choose Edit > Object Properties. The objects property sheet opens. Open the Flush & gap
tab and make the desired specifications.
It is possible to view, in 2D mode, the selected flush & gap gauges using the Flush & Gap
Gauge Navigator. To access the navigator, choose View > Object Navigator > Flush & Gap
Gauges.

302
Additional tools
Build/Inspect

Basic measurements

Speech recognition

PolyWorks|Talisman

Creating Level Planes

Orient to Gravity

303
BUILD/INSPECT MEASURE

Measuring displacement during real-time

assembly
While moving a physical part, it is very useful to track its
deviation to stable CAD surfaces or feature(s) to get the
part into the closest possible position.

The Build/Inspect mode offers visual and audio guidance

for tasks such as lining up to a hole or axis, leveling a part,
or securing it in a fixture. Deviations can be measured in
real time to a center point, axis, or surface. It is possible to
measure the probe position to one or to many features
simultaneously, using set tolerances for each feature. If
necessary, the deviation can be recorded for later
reference.

Objective: Move a part into position over a fixed assembly hole using real-time guidance.

Required: A CAD model or feature(s), and a probing device aligned to the Reference object.

Steps

1. In the Tree View, select a feature that is the

destination for movement.
2. Choose Measure > Build/Inspect.
The Build/Inspect dialog box and Build/Inspect
Objects pane open.

3. In the Method list, select Single distance to

show guidance to just one feature.

4. Under Object selection, select Specific to

choose the feature to be guided to.

Distance arrows, digital readout values, and audio

feedback in the 3D scene indicate the current
distance of the probe from the destination
feature.

5. Adjust the part using this guidance to bring it

closer to the destination.
Build/Inspect feedback displays in red and green,
based on positional tolerances.

304
BUILD/INSPECT MEASURE

6. Specify the Distance Type, Compensation,

and Tolerance values in the Build/Inspect
Objects pane.
The Inverted compensation method can be useful
when building or inspecting a fixture and only the
CAD model of the part is available.
7. If desired, acquire a point to record the final
position.

Results

If a point is collected, it is added to the Tree The physical part location is optimized (a
View under the Features branch. A green representation of the part is shown in blue),
check overlay on the object icon indicates the and if a point was collected, it is displayed in
measured status. the 3D scene.

Notes

It is possible to measure several features Each feature can be assigned an individual

simultaneously by selecting the Multiple Digital Readout that allows the user to track
distances method. the probe position with regards to more than
one destination.

305
BASIC MEASUREMENTS MEASURE

Taking basic measurements interactively

To quickly measure simple dimensions on a model,
cross-section, or feature, use the Basic Measurements tool.
Basic measurements include various distances, radii, curve
lengths, and angles. Calculations are performed by simply
anchoring on the object in the 3D scene. Basic measurements
are not updatable, but offer a quick and easy way to get a
measurement.

Objective: Measure an angle interactively.

Required: The project contains a Reference and/or Data object.

Steps

1. Choose Measure > Interactive Measurements >

Basic.

2. Specify the Angle measurement type to

measure a basic angle on the part.

3. If the part is aligned to a coordinate system,

select Project onto plane and choose a system
plane or plane feature to constrain the angle
measurement.

4. In the 3D scene, define one side of the angle by

anchoring two or more points on the model.
1 2
Press and hold SHIFT to pick the closest vertex.

5. Right-click to confirm the first side.

306
BASIC MEASUREMENTS MEASURE

6. Define the second side of the angle by

anchoring two or more points on the model. 4
3
Press and hold SHIFT to pick the closest vertex.

7. Right-click to end the measurement.

Results

The angle measurement is added to the The angle measurement is displayed in the
Tree View under the Measurements branch. 3D scene.

Notes

It is possible to perform basic measurements

on cross-sections and features as well. This
can make anchoring more accurate.

307
REMOTE APPLICATIONS MEASURE

Measuring when away from the workstation

When performing probing operations away from the computer, which is common for laser
tracker applications, it can be helpful to have access to functions and operations like capturing
a point or changing the type of feature that will be probed without having to go back to the
computer. In PolyWorks, it is possible to perform these operations by using predefined vocal
commands or by using Talisman, which is the PolyWorks mobile application.

Using speech recognition

This functionality allows performing operations by using predefined vocal commands.

Objective: Launch functions using vocal commands.

Required: An audio input device, such as a microphone, must be available on the computer
and a probing device must be ready to use.

Steps

1. Connect to the probing device in IMInspect

Probing.

2. Choose Tools > Start Speech Recognition.

3. Say a command recognized by the computer,

such as Probe circles.
The list of available commands can be found on
the Speech Recognition page of the IMInspect
Options dialog box (choose Tools > Options to
open the options dialog box). It is possible to
modify the voice command associated with an
operation at any time.

The action is launched.

For this example, a constraining plane must
first be probed.
4. Say Measure to start the measurement of a
point on the constraining plane.
A measurement point is acquired.
5. Acquire as many points as needed to probe the
constraining plane.
6. Say End to acquire the compensation point
and end the probing of the plane.

308
REMOTE APPLICATIONS MEASURE

7. Proceed with the probing of the circle by using

the same commands to capture a point and
perform the compensation.

Results

The new probed circle appears in the Tree View and is displayed in the 3D scene.

Notes

Before using Speech Recognition, it is recommended to train the computer to better

understand the users speech. This function is available in the speech recognition engine of
the operating system. In Microsoft Windows 7, this function is found in Control Panel > Speech
Recognition.

309
REMOTE APPLICATIONS MEASURE

Creating new actions through macro scripts

It is possible to associate a voice command to a macro script containing custom operations.

Steps

1. Choose Tools > Options and go to the Speech

Recognition page.

2. Click Create.
The Create Voice Commands using Macro Script
dialog box opens.

3. Enter the Action name.

4. Enter the Voice command associated with the

action.

5. Click Import to import the corresponding

macro script file.

6. Click Create.

Results

The action is added to the list with the (macro script) suffix. This helps to identify user-
defined commands.

Notes

To edit the macro script associated with a voice command, go to the Speech Recognition
page of the IMInspect Options, select an action from the list, then click Open Macro Script.

310
REMOTE APPLICATIONS MEASURE

Connecting to Talisman
Talisman gives remote control of PolyWorks such as: accessing the IMInspect Probing 3D
scene and performing 3D transformations; connecting to a probing measurement device;
configuring measurement modes and parameters; and data acquisition.
The Talisman application runs on mobile devices compatible with iOS 5.0 or later or Android
4.1 or later and communicates with PolyWorks via a Wi-Fi connection.

Objective: Have remote access to an IMInspect project using Talisman.

Required: The workstation and the mobile device must be connected to the same network
and an IMInspect project must be open on the workstation.

Steps

1. In the Workspace Manager, choose Tools >

Options.

2. In the PolyWorks/Workspace Manager Options

dialog box, open the Talisman page.

3. Select the PolyWorks server for Talisman

parameter.
This enables communication between Talisman
and PolyWorks. Unless the user configuration is
reset, this only needs to be done once.
4. Click OK.

5. Start the Talisman application on the mobile

device.

6. Within the Talisman application, select the

project in order to view and perform desired
operations.

311
CREATING LEVEL PLANES MEASURE

Creating level planes

Some laser trackers have an electronic level that calculates the inclination of the tracker with
respect to the axis of gravity. IMInspect Probing allows obtaining the necessary information
from the tracker's level to create a measured plane primitive. The plane is oriented with
respect to gravity, which results in a plane that is perfectly horizontal.

Objective: Create a level plane.

Required: A laser tracker with an electronic level.

Steps

1. Connect to the laser tracker in IMInspect

Probing.

2. Make sure that the laser tracker is initialized.

3. On the Probing Device Control toolbar, click

the arrow next to the Orient to Gravity
button.

4. Choose Create Level Plane.

The laser tracker performs a series of
movements from which it will output a plane
feature that is leveled.

Results

The plane is added to the Tree View, under

the Features branch.

Notes

Once the plane is created, a new coordinate system can be defined using this level plane by
choosing Tools > Coordinate Systems > Create Cartesian.

312
ORIENTING TO GRAVITY MEASURE

Orienting to gravity
When laser trackers have an electronic level, it is possible to orient them to gravity. The level
inside the tracker computes the inclination of the tracker with respect to the axis of gravity so
that acquired points are compensated by taking into account the computed inclination.

Objective: Orient the laser tracker to gravity.

Required: A laser tracker with an electronic level.

Steps

1. Connect to the laser tracker in IMInspect

Probing.

2. Make sure that the laser tracker is initialized.

3. On the Probing Device Control toolbar, click

the Orient to Gravity button.
The laser tracker performs a series of
movements from which it measures its incli-
nation angles.

Results

A plumb bob icon appears to the left of the active

device position to indicate that the laser tracker is
oriented to gravity.

313
Report
GEOMETRY CONTROLS REPORT

Geometry controls
When inspecting using measurement objects, namely features, cross-sections, comparison
points, and gauges, the main purpose is to control whether the geometric characteristics of
the objects are within the specified tolerance. This is done by adding controls on the
geometric characteristics of measurement objects. These geometry controls can be of two
types.

Dimensional controls All measurement objects can have dimensional controls. These
controls are used to control, using a tolerance, various geometric characteristics of
measurement objects, like the diameter of a circle, the 3D distance of a comparison point, or
the flush value of a flush & gap gauge. Each dimensional control reports a measured value
and a deviation, is toleranced, and can report a nominal value.

GD&T controls (features only) Only feature objects can have GD&T controls. These special
controls are used to control precise geometrical dimensions, as specified by the
ASME Y14.5 2009 and ISO standards.

IMInspect Probing offers the Geometry Controls pane that is the unique access through which
the controls of all measurement objects are managed.

The Geometry Controls pane allows doing the following for a measurement object:

View all dimensions and review the nominal, measured, and deviation values; note that
distance controls and most GD&T controls typically only have a measured value, which is
also the deviation.
Choose the dimensions to tolerance (become dimensional controls).
Create GD&T controls for features.
Edit the tolerance for the controls.

By default, new controls appear in the annotation of features in the 3D scene, and are
included in report tables created from all measurement objects.

315
GEOMETRY CONTROLS REPORT

Adding and removing controls

The Geometry Controls pane allows viewing all dimensions (for example, radius, diameter, or
x, y, z coordinates) and choosing which one will be used as a control. Check boxes and a
different background color indicate whether each dimension is effectively controlled or not.

Objective: Specify dimensions to control for a measurement object.

Required: A measurement object.

Steps

1. In the Tree View, select a measurement object.

Use a multiple selection to specify controls for
same-type measurement objects simultaneously.

2. Choose Measure > Geometry Controls.

The Geometry Controls pane opens.

3. In the pane, click Add/Remove Dimensional

Controls to display all available dimensional
controls for the feature type.

4. Select the desired controls in the expanded list.

Their current results are displayed in the pane.
5. Click Add/Remove Dimensional Controls
again to show only the effective controls.

Results

The added controls, and their current results, are displayed in the Geometry Controls pane.

316
GEOMETRY CONTROLS REPORT

Notes

For features and gauges, if the nominal component is missing, its value can be entered directly
in the cell under the Nominal column.

The Geometry Controls pane is also used to add and encode Geometric Dimensioning and
Tolerancing (GD&T) controls. See Adding and encoding GD&T controls on page 325 for more
information.

317
GEOMETRY CONTROLS REPORT

Editing control tolerances

A tolerance, consisting of upper and lower tolerance limits, is assigned to each individual
control. Values can be edited manually, or be changed by assigning a tolerance template that
contains predefined tolerance limits.

Standard tolerance templates are provided. However, new tolerance templates can be
created on the Objects > Tolerances page of the IMInspect Options dialog box. Choose
Tools > Options to open the options dialog box.

Objective: Edit the tolerance of a geometry control.

Required: A measurement object.

Steps

1. In the Tree View, select a measurement

object.
Use a multiple selection to specify tolerances
for same-type measurement objects
simultaneously.

2. Click the arrow in the Tolerance field.

3. Edit the tolerance limits using one of the
following methods:
Manually: Enter tolerance limit values in
the dialog box displayed.
Using a template: Click the Assign
Tolerance button in the dialog box
displayed and select a tolerance
template.

Results

The new tolerance values are displayed in the

pane.

Notes

Tolerances can be edited for multiple controls

simultaneously by selecting the controls in
the pane and clicking Edit Controls.

318
GEOMETRY CONTROLS REPORT

Using control templates

When a measurement object is created, its controls and their tolerance are specified by the
objects default control template. In the Geometry Controls pane, new controls can be added
and different tolerances can be specified for a measurement object. It is possible to save the
current specifications as a new user control template for that type of object, which can then
be used to set the controls of other objects of the same type. It can also be designated as the
default control template for the particular type of object.

Control templates provided with PolyWorks are called standard templates and have the STD
prefix in template lists, while control templates created by users have the USR prefix. Standard
templates cannot be deleted.

Saving a control template

Objective: Save a control template from the current controls of a measurement object.

Required: A measurement object.

Steps

1. In the Tree View, select a measurement object.

2. Choose Measure > Geometry Controls.

The Geometry Controls pane opens.

3. In the pane, modify the controls if required.

4. Click Save as Control Template.

To save as the default control template for the

type of measurement object, click Set as Default.

5. Specify the name of the new control template

and click Save.

Results

A user control template is saved for the type of

measurement object. It can be used to set the
contents of other measurement objects of the
same type. The default template is in bold.

319
GEOMETRY CONTROLS REPORT

Setting controls using a template

Objective: Set controls for a measurement object using a control template.

Required: A measurement object.

Steps

1. In the Tree View, select a measurement object.

Use a multiple selection to set the controls for
same-type measurement objects simultaneously.

2. In the Geometry Controls pane, click Set

Controls using Template.
3. Choose the template.

Results

The control template is used to set the controls of the selected measurement object.

320
GEOMETRY CONTROLS REPORT

Managing control templates

The template editor allows personalizing control templates, either to create a new control
template, set a control template as the default for a measurement object type, edit the
contents of a user control template (USR) or delete it from the list of templates.

Managing existing templates

Objective: For a type of measurement object, delete a user template from the list of
templates and change the default control template.

Required: More than two control templates for the measurement object type.

Steps

1. Choose Tools > Edit Templates.

The Edit Templates dialog box opens.

2. In the Type list, select Control.

3. Browse for the desired object type.

4. Select the control template to designate as the

default control template.
The control template Dia+X+Y is selected as an
example.

5. To make the selected template the default

template, click Set as default.

6. To delete an existing user template (USR),

select it and click Delete.

Results

The new default control template is indicated

in bold.

New circles will use the new default control

template.

321
GEOMETRY CONTROLS REPORT

Creating and editing a user control template

Objective: For a type of measurement object, create a new user template and edit its
contents.

Required: IMInspect Probing is open.

Steps

1. Choose Tools > Edit Templates.

The Edit Templates dialog box opens.

2. In the Type list, select Control.

3. Browse for the desired object type.

4. To create a new user template, click Create.

The Create User Template dialog box opens.

5. Specify the Name of the new user template.

6. Specify the Base Template for the new user
template.
If a template is selected upon creation, it will be
preselected as the base template by default.
7. Click Create.
The newly created user template can be set as
default by selecting the Set as default
parameter.

8. Edit the content of the newly created control

template, directly in the pane to the right, by
selecting the desired controls and changing the
tolerance values for the controls.
9. Click Apply.

322
GEOMETRY CONTROLS REPORT

Results

The new user control template is added to the It can now be assigned to measurement
list of templates. objects.

Notes

Edit the content of a user control template at any time by selecting it in the list, making the
required modifications in the pane, then clicking Apply.

323
GEOMETRY CONTROLS REPORT

Controlling features
When inspecting using features, the geometric characteristics of the objects can be controlled
with two types of controls: dimensional and GD&T.

Dimensional controls: They allow controlling, using a tolerance, all characteristics of a

feature relating to size, location, and orientation, such as radius, origin, length, and angle.
When nominal and measured values are present for a dimensional control, a deviation is
calculated, and using the specified tolerance, a Pass/Fail status can be determined.
GD&T controls: These controls are used to control precise geometrical dimensions, as
specified by the ASME Y14.5 and ISO 1101 standards. The measurement envelope, datum
constraints, measured results, and Pass/Fail statuses are displayed for each encoded
control.

Adding dimensional controls

Objective: Add dimensional controls to a feature.

Required: A feature measurement object.

Steps

1. In the Tree View, select a feature.

Use a multiple selection to modify same-type
features simultaneously.

2. Choose Measure > Geometry Controls.

The Geometry Controls pane opens.

3. In the pane, click Add/Remove Dimensional

Controls to display all available dimensional
controls for the feature type.

4. Select each desired control in the expanded

list.
Their current results are displayed in the pane.
5. Click Add/Remove Dimensional Controls
again to show only the effective controls.

324
GEOMETRY CONTROLS REPORT

Results

The added controls and their current results

are displayed in the Geometry Controls pane.

Notes

If a nominal feature component exists, the nominal values are displayed in the Nominal
column. If the component is missing, its nominal values can be entered directly in the fields.

Adding and encoding GD&T controls

Objective: Add and encode a GD&T control.

Required: A feature measurement object.

Steps

1. In the Tree View, select a feature.

2. Choose Measure > Geometry Controls.

The Geometry Controls pane opens.

3. In the pane, click Add GD&T Control.

4. In the list, select the desired GD&T control.

Only GD&T controls appropriate for the selected
feature type are displayed.

325
GEOMETRY CONTROLS REPORT

5. Enter the required information to define the

GD&T control, including Tolerance zone,
Material condition, Datum features, and
Tolerance zone mobility modifier.
Datum Features must be defined before using
them for encoding.

6. Press the ENTER key to confirm.

Results

The GD&T control is displayed in the Geometry

Controls pane. If the feature contains a
nominal and a measured component, the
deviation is automatically calculated.

Notes

When a GD&T control contains an error, feedback is provided with different symbols in the
Control column. Hovering the mouse over the symbol displays information about an invalid
or incomplete GD&T encoding.

326
GEOMETRY CONTROLS REPORT

Available GD&T controls by feature type

Here is a list of possible GD&T controls by feature type.

Form Size Orientation Location

Concentricity/Coaxiality
Spherical Diameter
Mating Thickness
Mating Diameter

Perpendicularity
Mating Distance
Local Diameter

Surface Profile
Mating Length

Local Distance
Mating Width

Total Runout
Straightness
Cylindricity

Parallelism
Angularity

Symmetry
Circularity
Flatness

Position
Plane *

Cylinder

Cone

Surface

Sphere

Circle

Slot

Rectangle

Polygon

Ellipse

Line

Point

Slab

Pattern

* Only available when working under the ISO 1101 GD&T standard. This option is available on the
Objects > Features > GD&T page of the IMInspect Options dialog box. Choose Tools > Options.

327
GEOMETRY CONTROLS REPORT

Defining datum features

Objective: Define a feature as a datum for use in GD&T controls.

Required: A feature.

Steps

1. In the Tree View, select a feature.

2. Choose Edit > Object Properties.
The Properties dialog box opens.
The property sheet of a feature can also be
accessed by double-clicking on it.

3. Click the Feature tab.

4. Select a datum label in the Datum feature
label list.
Labels that are already used are not available in
the list. Custom datum labels can be created by
entering them manually.
5. Click Apply.

Results

The datum label is added to the feature, and

the feature is renamed by default.

Notes

Datum labels can also be assigned to

features during feature creation. While in the
feature creation interface, select a datum
label in the Datum feature label list.

328
GEOMETRY CONTROLS REPORT

Defining datum targets

Objective: Define reference targets as a datum target for use in GD&T controls.

Required: A reference target point or line.

Steps

1. In the Tree View, select a reference target.

Standard reference target points and lines can be
used as datum targets.

2. Choose Edit > Object Properties.

Alternatively, right-click the selected reference
target in the Tree View and choose Properties.
The Properties dialog box opens.
3. On the Reference target tab, select a datum
label in the Datum target label list.
Labels that are already used are not available in
the list. Custom datum labels can be created by
entering them manually.
4. A default index value, starting at 1, is
automatically populated in the index field to
the right. If desired, manually enter a custom
index number.
5. Click Apply.

Results

The datum label is added to the reference

target and is renamed by default.

Notes

Datum labels can also be assigned to reference

targets on creation. While in the creation
interface, select a datum label in the Datum
target label list.

When used in the Datum Reference Frame of a GD&T control, all index numbers of the
specified datum are used. For example, if reference targets A1, A2, and A3 exist, and Datum A
is specified in the Datum Reference Frame, all three reference targets are used.

329
GEOMETRY CONTROLS REPORT

Defining composite datums

Objective: Create a composite datum from two or more datum features for use in GD&T
controls.

Required: Two or more datums of the same feature type.

Steps

1. Choose Measure > Features > Composite Datum

Features.
The Composite Datum Features dialog box
opens.

In the Creation section:

2. Select the first datum feature in the first list.

3. Select a second datum feature of the same

feature type in the second list, which appears
after specifying the first one.
Only usable datum features, such as datum
features of the same feature type, are displayed
in the list.

4. Continue until the composite datum contains

all the desired datum features.

5. Click Create.

Results

The composite datum feature appears in the The composite datum feature is now
Composite datum features list. available for use in GD&T controls.

330
GEOMETRY CONTROLS REPORT

Creating features from measurement envelopes

Objective: Create features representing the GD&T measurement envelope.

Required: A valid and measured GD&T control.

Steps

1. In the Tree View, select a feature.

2. Choose Measure > Geometry Controls.

The Geometry Controls pane opens.

3. In the pane, select a GD&T control.

4. Right-click in any field and choose Create
Features > From Measured Envelope.

Results

A new feature is added to the Tree View that The measured envelope is displayed in the
represents the shape and size of the 3D scene at the location of the measured slot
measurement envelope. with respect to the DRF alignment.

Notes

The measurement envelope feature describes the measured value of the GD&T control, the
envelope shape, and the measured location of the feature as constrained by the Datum
Reference Frame.

7.087

331
GEOMETRY CONTROLS REPORT

Controlling cross-sections
The Geometry Controls pane can be used to specify toleranced dimensional controls for a
cross-section. Dimensional controls allow controlling, using tolerances, the characteristics of a
cross-section relating to size, form, and deviation such as Min and Max deviations, line profile,
length, and area. Results can be obtained when the nominal and measured components are
present. For a control, typically the nominal and measured values are used to obtain a
deviation and, using the tolerance and deviation, a Pass/Fail status is determined.

Objective: Specify controls for a cross-section.

Required: A cross-section.

Steps

1. In the Tree View, select a cross-section.

Use a multiple selection to modify cross-sections
simultaneously.

2. Choose Measure > Geometry Controls.

The Geometry Controls pane opens.

3. In the pane, click Add/Remove Dimensional

Controls to display all available dimensional
controls for the object type.

4. Select the desired controls in the

expanded list.
Current values are displayed in the pane.
5. Click Add/Remove Dimensional Controls
again to show only the effective controls.

Results

The added controls and their current results

are displayed in the Geometry Controls pane.

332
GEOMETRY CONTROLS REPORT

Controlling comparison points

The Geometry Controls pane can be used to specify toleranced dimensional controls for a
comparison point. Dimensional controls allow controlling, using tolerances, the
characteristics of a comparison point that relate to its location in space. When the nominal
and measured components are present, results can be obtained. For a control, typically the
nominal and measured values are used to obtain a deviation and, using the tolerance and
deviation, a Pass/Fail status is determined.

Objective: Specify controls for a comparison point.

Required: A comparison point.

Steps

1. In the Tree View, select a comparison point.

Use a multiple selection to modify comparison
points simultaneously.

2. Choose Measure > Geometry Controls.

The Geometry Controls pane opens.

3. In the pane, click Add/Remove Dimensional

Controls to display all available dimensional
controls for the object type.

4. Select the desired controls in the

expanded list.
Current values are displayed in the pane for the
new controls.
5. Click Add/Remove Dimensional Controls
again to show only the effective controls.

Results

The added controls, and their current results,

are displayed in the Geometry Controls pane.

333
GEOMETRY CONTROLS REPORT

Controlling profile gauges

The Geometry Controls pane can be used to specify toleranced dimensional controls for a
profile gauge. Dimensional controls allow controlling, using tolerances, the characteristics of a
profile gauge that relate to its size and deviation from the nominal component. The exact
controls available depend on the profile family type. For a control, typically the nominal and
measured values are used to obtain a deviation and, using the tolerance and deviation, a
Pass/Fail status is determined.

Objective: Specify controls for a profile gauge.

Required: A profile gauge.

Steps

1. In the Tree View, select a profile gauge.

Use a multiple selection to modify profile gauges
simultaneously.

2. Choose Measure > Geometry Controls.

The Geometry Controls pane opens.

3. In the pane, click Add/Remove Dimensional

Controls to display all available dimensional
controls for the object type.

4. Select the desired controls in the

expanded list.
Current values are displayed in the pane for the
new controls.
5. Click Add/Remove Dimensional Controls
again to show only the effective controls.

Results

The added controls, and their current results,

are displayed in the Geometry Controls pane.

334
GEOMETRY CONTROLS REPORT

Controlling flush & gap gauges

The Geometry Controls pane can be used to specify toleranced dimensional controls for a
flush & gap gauge. Dimensional controls allow controlling, using tolerances, the character-
istics of a flush & gap gauge that relate to its size and deviation from the nominal component.
The exact controls available depend on the flush & gap family and name. For a control,
typically the nominal and measured values are used to obtain a deviation and, using the
tolerance and deviation, a Pass/Fail status is determined.

Objective: Specify controls for a flush & gap gauge.

Required: A flush & gap gauge.

Steps

1. In the Tree View, select a flush & gap gauge.

Use a multiple selection to modify flush & gap
gauges simultaneously.

2. Choose Measure > Geometry Controls.

The Geometry Controls pane opens.

3. In the pane, click Add/Remove Dimensional

Controls to display all available dimensional
controls for the object type.

4. Select the desired controls in the

expanded list.
Current values are displayed in the pane for the
new controls.
5. Click Add/Remove Dimensional Controls
again to show only the effective controls.

Results

The added controls, and their current results,

are displayed in the Geometry Controls pane.

335
ANNOTATIONS REPORT

Annotations
Annotations are graphical notes displayed in the
3D scene in order to identify objects and provide
information about them. By default, each object
shown in the 3D scene has an annotation attached to
it.

It is possible to edit the content and appearance of an

object annotation, and reposition it in the 3D scene.

Editing an object annotation

The information of object annotations on creation is determined using a default annotation
template. The contents of an annotation can be changed by applying another template, or by
adding and removing items manually. The resulting configuration can be saved as a new
template that can then be applied to other objects of the same type. It can also be saved and
set as the default template, which is applied to newly created objects of the same type.

Templates provided with PolyWorks are called standard templates and have the STD prefix in
template lists, while templates created by users have the USR prefix. Standard templates
cannot be deleted.

Setting object annotation contents using a template

Objective: Set the contents of an object annotation by applying an annotation template.

Required: The project contains an object.

Steps

1. Choose Tools > Annotations > Edit to enter the

interactive selection mode.
2. In the 3D scene, left-click an object annotation.
The annotation editor opens, displaying the
object annotation.

3. On the annotation editor toolbar, click Set

Contents using Template

4. On the menu, select the annotation template

to apply.

336
ANNOTATIONS REPORT

Results

The annotation contents are determined by the applied annotation template.

Editing annotation contents manually

Objective: Edit the contents of an object annotation manually.

Required: The project contains an object.

Steps

1. Choose Tools > Annotations > Edit to enter the

interactive selection mode.
2. In the 3D scene, left-click an object annotation.
The annotation editor opens, displaying the
object annotation.

3. On the annotation editor toolbar, click Edit

Contents.

4. On the menu, select the section of the

annotation to modify.
In this example, Columns is selected. The Edit
Columns dialog box opens.

337
ANNOTATIONS REPORT

5. To add columns, select them in the Available

columns list, and click the Add arrow to
transfer them to the Displayed columns list.
6. To remove displayed columns, select them in
the Displayed columns list, and click the
Remove arrow to transfer them to the
Available columns list.
7. Reorder the displayed columns using the Move
Up and Move Down arrows located on the
right side.
8. Click Apply to view the changes in the
annotation.
9. Click OK to close the editor.
Repeat steps 3 through 9 to edit other sections
of the annotation.

A similar dialog box is available when editing the

other sections, such as Header and Lines.
However, when editing Lines, the dialog box
features a list box that specifies if an annotation
shows All Controls for the measurement objects,
or allows selecting Specific lines (specific controls
and dimensions) Specific must be selected.

Results

The annotation now contains the desired information.

Notes

Edit more quickly using the shortcut menus available by right-clicking in the different sections
of the annotation editor:

Click Edit Header, Edit Columns, and Edit Lines for the dialog boxes described
previously.

338
ANNOTATIONS REPORT

Add and remove items for each section by clicking them on the sections shortcut menu.

339
ANNOTATIONS REPORT

Saving an annotation template

Objective: Save an annotation template from an object annotation that has been modified.

Required: The project contains an object with a modified annotation.

Steps

1. Choose Tools > Annotations > Edit to enter an

interactive selection mode.
2. In the 3D scene, left-click an object annotation.
The annotation editor opens, displaying the
object annotation.

3. On the annotation editor toolbar, click Save as

Template.
The Save as Template dialog box opens.

4. Specify the name of the new annotation

template and click Save.

Results

The new user annotation template is saved and can be applied to other objects of the same
type.

340
ANNOTATIONS REPORT

Managing annotation templates

The template editor allows personalizing annotation templates, either to create a new
annotation template, to set an annotation template as the default one for an object type, edit
the contents of a user annotation template or delete it from the list of templates.

Managing existing templates

Objective: For an object type, set a default annotation template, or delete a user template
from the list of annotation templates.

Required: More than two annotation templates for the object type.

Steps

1. Choose Tools > Edit Templates.

The Edit Templates dialog box opens.

2. In the Type list, select Annotation.

3. Browse for the desired object type.

4. Select the annotation template to designate as

the default annotation template.
The Name only annotation template is selected
as an example.

5. To make the selected template the default

template, click Set as Default.

6. To delete an existing user template (USR),

select it and click Delete.

Results

The new default annotation template is shown

in bold.

New features will use the new default

annotation template.

341
ANNOTATIONS REPORT

Creating and editing a user annotation template

Objective: Create a new user template for an object type and edit its contents.

Required: IMInspect Probing is open.

Steps

1. Choose Tools > Edit Templates.

The Edit Templates dialog box opens.

2. In the Type list, select Annotation.

3. Browse for the desired object type.

4. To create a new user template, click Create.

The Create User Template dialog box opens.

5. Specify the Name of the new user template.

6. Specify the Base template for the new user
template.
If a template is selected upon creation, it will be
preselected as the base template by default.
7. Click Create.
The newly created user template can be set as
default by selecting the Set as default option.

8. Edit the content of the newly created

annotation template directly in the pane to the
right.
For more information, see Editing annotation
contents manually on page 337.
9. Click Apply.

342
ANNOTATIONS REPORT

Results

The new user annotation template is added to It can now be assigned to objects.
the list of annotation templates.

Notes

Edit the content of a user annotation template at any time by selecting it in the template list,
making the required modifications in the pane, then clicking Apply.

Modifying the appearance of annotations

Objective: Edit the appearance of an annotation.

Required: The project contains an object with an annotation.

Steps

1. Choose Tools > Annotations > Edit.

2. In the 3D scene, left-click an object annotation.
The annotation editor opens, displaying the
object annotation.

3. On the annotation editor toolbar, click Edit

Format.
The Display > Annotations > Formatting
page of the IMInspect Options dialog box
opens.

4. Edit the formatting options of annotations.

5. Click Apply.
The formatting is applied to all annotations
that appear in the 3D scene.

343
ANNOTATIONS REPORT

Repositioning annotations in the 3D scene

To maximize the clarity of report snapshots, it is possible to reposition annotations in the
3D scene prior to taking a snapshot.

Objective: Reposition object annotations in the 3D scene.

Required: The project contains an object with a visible annotation.

Steps

1. Choose Tools > Annotations > Drag to launch an

interactive dragging mode.
The mode can also be activated by holding the
ALT key and clicking the annotation.

2. In the 3D scene, left-click the object annotation

and drag to the desired location.
Performing a 3D transformation in the 3D scene
cancels any annotation repositioning;
consequently, annotations are moved back to
their original position.

Results

The annotations are now repositioned in the

3D scene.

Notes

The View menu offers tools used to hide, hide interactively, and restore annotations.

344
OBJECT NAVIGATORS REPORT

Visualizing measurement results using the object

navigator
Object navigators are specialized tools that
allow viewing objects one by one. In
addition, they display the dimensional and
GD&T controls of features, and the
measurement results of gauges.

Such visualization of the measurements

provides information about deviation
sources and direction, which can be useful
when troubleshooting.

Object navigators are available for:

Features
Cross-sections
Flush & gap gauges
Profile gauges

To access the object navigators, choose one from the View > Object Navigator submenu.

345
REVIEWING FEATURE MEASUREMENT RESULTS REPORT

Reviewing feature measurement results

The Feature Navigator is useful to review feature results,
in order to view the dimensional and the GD&T
measurements for each feature individually. This
visualization of the measurements provides information
about the deviation. Note that when features are
created on cross-sections, features are shown on their
cross-section.

Feature dimension results

Objective: Display the result of a dimensional measurement on the model.

Required: The IMInspect project must have measured features with a dimensional control.

Steps

1. In the Tree View, select the features to

visualize.
2. Choose View > Object Navigator > Features or
right-click and choose View > Feature Navigator.
The Feature Navigator dialog box opens.

3. In the Feature list, select the feature to display.

4. In the Control list, select the dimensional
control to display.
5. To display the nominal and/or measured
feature, select Show nominal components
and/or Show measured components.

Results

The feature dimensions for the selected

feature are displayed in the 3D scene.

346
REVIEWING FEATURE MEASUREMENT RESULTS REPORT

Feature GD&T controls

Objective: Display the result of a GD&T measurement on the model, showing the datum
reference frame, alignment, and calculated features.

Required: The IMInspect project must have a measured feature with a GD&T control.

Steps

1. In the Tree View, select the feature to visualize.

2. Choose View > Object Navigator > Features or
right-click and choose View > Feature Navigator.
The Feature Navigator dialog box opens.

3. In the Control list, select the GD&T control to

display.

4. To display the nominal and/or measured

feature, select Show nominal components
and/or Show measured components.

5. A color map can be displayed on GD&T

controls that are measured using data points
(for example, Surface Profile) by selecting
Show GD&T control color map.

6. If Show datum reference frame alignment is

selected, it displays the dataset and measured
features in position, as defined by the datums
in the datum reference frame.

7. Display the datum reference frame

components by selecting the items under
Datum features.

347
REVIEWING FEATURE MEASUREMENT RESULTS REPORT

Results

The model, datums used in the datum The nominal feature and the aligned and
reference frame, and feature itself are constrained measured feature are displayed,
displayed in the 3D scene. The measured using Pass/Fail colors.
features are aligned using the datum
reference frame.

Measured Nominal

348
REVIEWING CROSS-SECTION MEASUREMENT RESULTS REPORT

Reviewing cross-section measurement results

It is useful to review cross-section results, using the Cross-
Section Navigator, in order to visualize each cross-section
individually. Such visualization of the cross-sections
provides information about deviation, which can be useful
when troubleshooting.

Objective: Display the results of a cross-section, showing the nominal and measured
sections and deviations.

Required: The IMInspect project must have measured cross-sections.

Steps

1. In the Tree View, select the cross-sections to

visualize.
2. Choose View > Object Navigator > Cross-
Sections or right-click and choose View > Cross-
Section Navigator.
The Cross-Section Navigator dialog box opens.

3. In the Cross-section list, select the cross-

section to display.

4. Select Show nominal component and/or

Show measured component to display the
nominal and/or measured cross-section
components.

5. To manually modify the cross-sections by

extending, adjusting, or cutting them, click the
Extend, the Pick and Place Vertices, or the
Cut Segments button.

349
REVIEWING CROSS-SECTION MEASUREMENT RESULTS REPORT

Results

The cross-sections and deviations are

displayed in 2D in the 3D scene.

Notes

By default, measured cross-sections are

displayed along with a deviation color map
and deviation vectors. To hide the color map
and show only the cross-section profiles, click
Hide Color Map.

350
REVIEWING PROFILE GAUGE MEASUREMENT RESULTS REPORT

Reviewing profile gauge measurement results

It is useful to review profile gauge results, using the Profile Gauge
Navigator, in order to see how the results were obtained. Such
visualization provides information about deviation, which can be
useful when troubleshooting.

Objective: Display the result of a profile gauge, showing the

measurement zone, cross-sections, and gauge dimensions.

Required: The IMInspect project must have measured profile gauges.

Steps

1. In the Tree View, select the profile gauges to

visualize.
2. Choose View > Object Navigator > Profile
Gauges or right-click and choose View > Profile
Gauge Navigator.
The Profile Gauge Navigator dialog box opens.

3. In the Profile gauge list, select the gauge to

display.

4. In the Component list, select a component to

display the Nominal or Measured
component.

5. To show the components of the cross-sections

used to calculate the profile gauge, select
Show nominal component and/or Show
measured component.

351
REVIEWING PROFILE GAUGE MEASUREMENT RESULTS REPORT

Results

The profile gauge dimensions and linked

cross-sections are displayed in 2D in the
3D scene.

Notes

To view both the nominal and measured profile gauge results simultaneously, select Split
view. The nominal cross-sections and profile gauge dimensions are displayed on the left. The
measured cross-sections and profile gauge dimensions are displayed on the right.

Nominal Measured

352
REVIEWING FLUSH & GAP GAUGE MEASUREMENT RESULTS REPORT

Reviewing flush & gap gauge measurement results

It is useful to review flush & gap gauge results, using the Flush &
Gap Gauge Navigator, in order to see how the results were
determined. Such visualization provides information about
deviation, which can be useful when troubleshooting.

Objective: Display the result of a flush & gap gauge, showing

the measurement zone, cross-sections, and gauge dimensions.

Required: The IMInspect project must have measured flush & gap gauges.

Steps

1. In the Tree View, select the flush & gap gauges

to visualize.
2. Choose View > Object Navigator > Flush & Gap
Gauges or right-click and choose View > Flush &
Gap Gauge Navigator.
The Flush & Gap Gauge Navigator dialog box
opens.

3. In the Flush & gap gauge list, select the gauge

to display.

4. In the Component list, select a component to

display the Nominal or Measured
component.

5. Select the Show variable annotations to

display the coordinates of the gauge contact
points and other gauge key points.

6. To show the components of the cross-sections

used to calculate the flush & gap gauge, select
Show nominal component and/or Show
measured component.

353
REVIEWING FLUSH & GAP GAUGE MEASUREMENT RESULTS REPORT

Results

The flush & gap gauge dimensions and linked

cross-sections are displayed in 2D in the
3D scene.

Notes

To view both the nominal and measured flush & gap gauge results simultaneously, select Split
view. The nominal cross-sections and flush & gap gauge dimensions are displayed on the left.
The measured cross-sections and flush & gap gauge dimensions are displayed on the right.

Nominal Measured

354
FORMATTED REPORTS REPORT

Reporting
Producing reports is key to analyzing and communicating inspection measurements. Typically,
a report consists of report tables and report snapshots, completed by observations,
comments, and conclusions, all formatted into a printable document.

IMInspect Probing offers tools to generate and edit such reports.

Here is the typical workflow for reporting:

1. Create report tables.

Create report tables from
measurement objects in the Tree
View.
They are automatically added to the
active formatted report

2. Create 3D scene snapshots.

Create snapshots of the 3D scene to
show inspection results.
They are automatically added to the
active formatted report.

3. Prepare the formatted report.

Using the Report Editor tool, format
the report to include project and
piece information, comments on the
results, and shapes to emphasize
content.

4. Export.
Export the formatted report into
different formats, such as PDF.
The individual report items can be
exported as well. An example is to
export to Microsoft Excel.

355
TABLES REPORT

Working with report tables

A report table is a listing of the desired information of any measurement object, such as
nominal and measured values, tolerances, deviations, and pass/fail status. Tables are a very
useful way to summarize inspection results.

Typically, a measurement object report table

includes a title, a header area, the name of each
object, and the following information for each
of its controls:

Nominal and measured values.

Note that certain dimensional controls (for example, distance controls), and GD&T controls
(except size controls), do not have nominal values.
Tolerance limits
A deviation
A pass/fail test result
Out-of-tolerance value

Since objects are updated by the Automatic Project Update mechanism, table results are
automatically updated as well. Table contents and formatting can be edited to suit different
reporting needs. Table reports can be incorporated into a formatted report or exported for
use in applications like Microsoft Excel.

Creating report tables

Objective: Create a report table containing the current results of a measurement object.

Required: The project contains a measurement object.

Steps

1. In the Tree View, select the measurement object

for which to report measurements.

2. Choose Report > Create Tables > From Objects.

356
TABLES REPORT

Results

The report table is added to the active The report table is automatically positioned
formatted report, shown at the bottom of the on a page in the report, and can be viewed
Tree View. by double-clicking the report name in the
Tree View.

Notes

If two or more types of object are selected, a report table will be generated for each type. In
the example shown below, all selected features are included in one report table, and selected
comparison points are included in a second report table.

357
TABLES REPORT

Setting report table contents using a template

When a report table is created from a measurement object, its contents are specified by the
objects default table template. The report table can then be edited as required, by adding and
removing information and changing the formatting. A new user table template can be created
from the setup of the current report table, and can then be used to set the contents and
formatting for other reports of the same type. It can also be designated as the default table
template for the particular type of report table.

Table templates provided with PolyWorks are called standard templates and have the STD
prefix in template lists, while table templates created by users have the USR prefix. Standard
templates cannot be deleted.

Objective: Set the contents of a report table by applying a table template.

Required: The project contains a report table.

Steps

1. In the Tree View, double-click a report name to

open the Report Editor.

2. In the Report Editor, select a report table.

3. Choose Edit > Table.
The table editor opens displaying the report
table.

4. On the table editor toolbar, click Set Contents

using Template.

5. On the menu, select the table template to

apply.

Results

The report table has the contents and formatting defined by the table template.

358
TABLES REPORT

Editing report table contents manually

Objective: Edit the contents of a report table manually.

Required: The project contains a report table.

Steps

1. In the Tree View, double-click a report name to

open the Report Editor.

2. In the Report Editor, select the report table to

edit.
3. Choose Edit > Table.
The table editor opens displaying the report
table.

4. On the table editor toolbar, click Edit Contents

to edit the contents.

5. On the menu, select the section of the table to

modify.
In this example, Columns is selected. The Edit
Columns dialog box opens.

359
TABLES REPORT

6. To add columns, select them in the Available

columns list, and click the Add arrow to
transfer them to the Displayed columns list.

7. To remove displayed columns, select them in

the Displayed columns list, and click the
Remove arrow to transfer them to the
Available columns list.

8. Reorder the displayed columns using the Move

Up and Move Down arrows located on the right
side.

9. Click Apply to view the changes in the table.

10. Click OK to close the editor.

Repeat steps 3 through 9 to edit other sections

of the table.

A similar dialog box is available when editing the

other sections, such as Title and Table Header.
However, when editing Lines, the dialog box
features a list box that specifies if a table shows All
Controls for the measurement objects, or allows
selecting Specific lines (specific controls and
dimensions) Specific must be selected.

Results

The report table now contains the desired information.

Notes

Edit more quickly using the shortcut menus available by right-clicking in the different sections
of the table editor:

Click Edit Title, Edit Table Header, Edit Object Header, Edit Columns, and Edit Lines for
the dialog boxes like those described previously.

360
TABLES REPORT

Add and remove items for each section by clicking them on the sections shortcut menu.

361
TABLES REPORT

Saving a table template

Objective: Save a table template from a modified report table.

Required: The project contains a report table.

Steps

1. In the Tree View, double-click a report name to

open the Report Editor.

2. In the Report Editor, select a report table.

3. Choose Edit > Table.
The table editor opens displaying the report
table.

4. On the table editor toolbar, click Save as

Template to save the current report table
configuration as a user table template.
The Save as Template dialog box opens.

5. Specify the name of the new table template

and click Save.

Results

The new user table template (USR) is saved. It

can be applied to other report tables of the
same type.

362
TABLES REPORT

Managing table templates

The template editor allows personalizing table templates, either to create a new table
template, to set a table template as the default one, edit the contents of a user table template
or delete it from the list of table templates.

Managing existing templates

Objective: For an object type, set a default table template, or delete a user template from the
list of table templates.

Required: More than two table templates for the object type.

Steps

1. Choose Tools > Edit templates.

The Edit Templates dialog box opens.

2. In the Type list, select Table.

3. Browse for the desired table type.

4. Select the table template to define as the

default one.
The feature table template SavedTemplate is
selected as an example.

5. To make the selected template the default

template, click Set as Default.

6. To delete an existing user template (USR),

select it and click Delete.

363
TABLES REPORT

Results

The new default table template is indicated in

bold.

New feature report tables will be created using

the new default table template.

Creating and editing a user table template

Objective: Create a new user template for an object type and edit its contents.

Required: IMInspect Probing is open.

Steps

1. Choose Tools > Edit Templates.

The Edit Templates dialog box opens.

2. In the Type list, select Table.

3. Browse for the desired table type.

4. To create a new user template, click Create.

The Create User Template dialog box opens.

5. Specify the Name of the new user template.

6. Specify the Base template for the new user
template.
If a template is selected upon creation, it is
preselected as the base template by default.
7. Click Create.
The newly created user template can be set as
default by selecting the Set as default option.

364
TABLES REPORT

8. Edit the content of the newly created table

template directly on the right pane.
For more information, see Editing report table
contents manually on page 359.
9. Click Apply.

Results

The new user table template is added to the list It can now be to assigned to report tables.
of table templates.

Notes

Edit the content of a user table template at any time by selecting it on the template list,
making the required modifications on the right pane, then clicking Apply.

365
TABLES REPORT

Editing the report table format

Objective: Edit the font and font size of a report table.

Required: The project contains a report table.

Steps

Edit the format of a single report table

1. In the Tree View, double-click a report name to

open the Report Editor.

2. In the Report Editor, select a report table.

3. Choose Edit > Table from the Report Editor
menu bar.
The table editor opens displaying the report
table
4. On the table editor toolbar, click Edit Format
The Edit Table Format dialog box opens.
5. Set the appropriate options.
To set the table format as the default one for all
new tables, select Set as default in the Edit Table
Format dialog box. The present settings are
transferred to the Objects > Reports > Tables >
Formatting page of the IMInspect options.
6. Click Apply.
The formatting is applied to the report table.

Specify the formatting options of all new report tables

1. Choose Tools > Options.

The IMInspect Options dialog box opens.

2. Choose Objects > Reports > Tables > Formatting.

3. Set the appropriate options.
4. Click Apply.
The formatting is applied to all subsequent
new report tables.

366
SNAPSHOTS REPORT

Working with report snapshots

Report snapshots are images captured from the 3D scene to report
the model and measurement results in full detail.

Since objects are updated through the Automatic Project Update, the
report snapshot will automatically be updated. The snapshot
contents can also be edited to modify the part orientation or the
objects shown at any time. Report snapshots can be incorporated
into a formatted report, or exported for use in applications like
Microsoft Excel.

Creating report snapshots

Objective: Create a report snapshot showing the contents of the 3D scene.

Required: The project contains a visible measurement object or model.

Steps

1. Prepare the 3D scene by giving the model a

suitable orientation and zoom level, and
displaying only the desired measurement
objects.

2. The annotations can be repositioned. Choose

Tools > Annotations > Drag.
Using the ALT key as a shortcut to drag
annotations.
Changing the 3D scene view will reset the
annotation locations.

3. Choose Report > Create Snapshots > Capture

3D Scene.

367
SNAPSHOTS REPORT

Results

The snapshot is added to the active formatted The snapshot is automatically positioned
report, shown at the bottom of the Tree View. on a page in the report, and can be viewed
by double-clicking the report name.

Editing a report snapshot

Objective: Edit a report snapshot to change its orientation or contents.

Required: The project contains a report snapshot.

Steps

Report snapshots are stored by default in the active formatted report, listed at the bottom of
the Tree View.

1. In the Tree View, double-click a report name to

open the Report Editor.

2. In the Report Editor, select a report snapshot.

3. Choose Edit > Snapshot.

368
SNAPSHOTS REPORT

4. In the 3D scene, modify the zoom level,

orientation, or objects displayed. The snapshot
extent is displayed as a dotted boundary line.
The extent of the 3D Scene region and the
Snapshot size can also be edited using the fields
in the Edit Snapshot dialog box.

5. Click Recapture.

Results

The report snapshot is updated in the

formatted report.

Notes

If a color map simply needs to be updated, do not edit the report snapshot. Rather, select the
snapshots for which the color map needs to be updated, and choose Edit > Assign Current
Color Scale to Snapshots > Selected, or right-click and choose Assign Current Color Scale.

369
FORMATTED REPORTS REPORT

Working with formatted reports

Reports are a good, organized way to present or share
inspection results. Formatted reports normally contain
report snapshots, report tables, text, and graphics and can
be edited and prepared as needed using the Report Editor
tool. While formatted reports are automatically generated
when report snapshots or report tables are created, they
can also be created manually. After a report is completed,
it is generally exported in PDF format for others to review.

Formatted reports are displayed in the Report Editor pane.

The Page View interface lists the page thumbnails, and the
main interface displays the page currently selected for
review and editing. Common tools are offered on toolbars
located above and below the page area, respectively.

370
FORMATTED REPORTS REPORT

Create formatted reports

By default, a formatted report is created as soon as a report snapshot or a report table is
created. Subsequent report items are automatically added sequentially on pages of the
formatted report as they are generated. A formatted report can also be created manually at
any time.

Objective: Create an empty formatted report manually.

Required: An IMInspect Probing project.

Steps

1. Choose Report > Create Formatted Report.

2. Specify report properties.
3. Click Apply and then click Close.

Results

The formatted report object is added at the The formatted report is initially empty.
bottom of the Tree View as the active Newly created report items (snapshots and
formatted report (in bold). tables) are automatically added to the
active formatted report.

Notes

Newly created report items are added to the active formatted report, which is displayed in
bold in the Tree View. To make any formatted report the active one, select it in the Tree View
and choose Report > Formatted Report > Activate.

371
FORMATTED REPORTS REPORT

Edit formatted reports

Objective: Edit an existing formatted report, move report items, and add text and graphics.

Required: The project contains a formatted report.

1. In the Tree View, double-click a report name to

open the Report Editor.
2. Perform one of the following edition
operations.

Move or resize report items in the formatted report

Steps

1. In the Report Editor, left-click the report item to

select it.
2. Left-click and drag the report item to move it to
a different location.
Move the report item to another page by dragging
it to a page thumbnail in the Page View.
3. Left-click and drag the handles of the report
item to resize it.

Results

The formatting and editing is applied to the report items.

Notes

To crop an image, click it to select it, then choose Format > Crop Image. Drag the handles to
crop, and then click anywhere outside the image to confirm.

372
FORMATTED REPORTS REPORT

Add and edit a text field in the report

Steps

1. In the Report Editor, choose Insert > Text Field >

Fixed to add a text field.

2. Position the text field by moving the mouse to

the intended location on the page, and left-click
to confirm.
The text field edition mode is automatically
activated. To access this mode after creation,
select the text field and choose Edit > Text.

3. Type to add text.

It is possible to change the format of a text field by
clicking it and choosing Edit > Item Properties.

Results

The text field is created and formatted in the

report.

Notes

It is also possible to add a variable to the text

field. Enter the text field edition mode, then
right-click and choose Insert. Page numbers,
dates, and properties can all be added, and
their values update automatically

373
FORMATTED REPORTS REPORT

Add and edit a graphical shape in the formatted report

Steps

1. In the Report Editor, choose Insert > Shapes >

[choose a shape type] to add graphical shapes.

2. Position the shape by moving the mouse to the

intended location on the page.
3. Left-click and drag to create the shape.
It is possible to format the created shape by
clicking it and choosing Edit > Item Properties.

Results

The shape is created and formatted in the formatted report.

Add a fixed image to the formatted report

Steps

1. In the Report Editor, add an image by choosing

Insert > Image From File.

2. Browse to the image file.

3. Click Open.

4. Move the image to the desired location on the

report page.
5. Resize the image, if necessary, by dragging the
item handles.

Results

The image is added to the report.

374
FORMATTED REPORTS REPORT

Add, reorder, or remove pages from the formatted report

Steps

1. In the Report Editor, add a report page by

choosing Insert > Page.

2. Reorder pages by clicking and dragging a page

thumbnail.

3. Delete a report page by selecting the thumbnail

and choosing Edit > Delete.

Results

The pages are added, reordered, or deleted from the formatted report.

375
FORMATTED REPORTS REPORT

Generate a PDF file from a formatted report

Objective: Save a formatted report as a PDF file.

Required: The project contains a formatted report.

Steps

1. In the Tree View, double-click a report name to

open the Report Editor.
2. In the Report Editor, choose File > Export
Report > PDF.

3. Browse to the desired location.

4. Specify a name for the exported formatted
report.
5. Click Save.

Results

The formatted report is saved in PDF format.

376
EXPORTING REPORT ITEMS REPORT

Exporting report items

Report items, such as tables and snapshots, can be exported from a formatted report. This
can be useful when the inspection results are used to fill out an existing external template, or
are published online or on a company network. Available export options include Excel, HTML,
and text files.

Objective: Export report items using available formats.

Required: The project contains a formatted report with report items.

Steps

1. Open the formatted report that contains the

report items to export by double-clicking it in
the Tree View.

2. In the Report Editor, select the report items to

export.
To select multiple report items, hold the CTRL key
while selecting them.

3. Choose File > Export Items to export the selected

items.
A file browser opens.

4. Specify a File name and location.

5. Select in the Save as type list, a file format.

The Options button opens a dialog box that
offers export parameters.

6. Click Save.

Results

The selected report items are exported to the specified file format.

Notes

To export items to the Microsoft Excel format, Microsoft Excel must be installed on the
computer.

377
Inspect multiple
pieces
REPEATING AN INSPECTION INSPECT MULTIPLE PIECES

Repeating an inspection on multiple pieces

In IMInspect Probing, all measurement object param-
eters and relations are stored in the project. The
stored information facilitates relational, parametric
inspection within the IMInspect Probing project, where
remeasuring of one object automatically updates any
related objects.

This functionality also allows for perfect repeatability

when inspecting multiple pieces, applying the
inspection routine of the first inspected piece to any
subsequent pieces. The inspection behavior (including
the measurement method) is determined by the
properties of each measurement object.

Multipiece inspection consists of three general steps:

1. Inspect and report the first piece.

2. Define a new piece.

3. Inspect a new piece using Play Inspection.

All pieces are stored within a single IMInspect project and their results can be reviewed
individually or summarized using Statistical Process Control (SPC) tools.

379
REPEATING AN INSPECTION INSPECT MULTIPLE PIECES

Working with multiple pieces

Each physical version of a part is called a piece. By default, the first piece is named piece 1.
Subsequent pieces are named piece 2, piece 3, and so on. Operations related to multiple
pieces are managed in the Multipiece Inspection toolbar.

New Piece

Opens an interface used to add a new piece to the project.

Play Inspection

Plays the active measurement sequence.

Sequence Editor

Displays the Sequence Editor pane.

Object Control SPC

Provides access to the Object Control SPC functionality.

When the New Piece button is pressed, a nominal copy of the current piece is created and a
Play Inspection operation is automatically launched for the new piece. The measurement
sequence of the first inspected piece is then applied to the new piece. See Inspecting a new
piece using Play Inspection on page 381.

The measurement data and results of each piece

inspection are stored in the project. The current
piece is shown in the Tree View.

Each piece is stored within the project, with its own

properties, describing the piece, operator, and
device used for inspection.

380
REPEATING AN INSPECTION INSPECT MULTIPLE PIECES

Inspecting a new piece using Play Inspection

The Play Inspection tool offers a guided, step-by-step
sequence to capture 3D datasets of a new piece, using
probing devices.

The Play Inspection tool:

automatically proposes a logical order of

measurement that considers device positions, data
alignments, object Tree View sequence, and geometric
constraints
triggers the right measurement method for each object
manages multiple device positions

The sequence proposed by the Play Inspection tool is called an autogenerated sequence and
it can be customized using the Sequence Editor. For information, see The Sequence Editor on
page 415.

Objective: Repeat an initial inspection on a new piece.

Required: A completed inspection project.

Steps

1. Choose Tools > Piece > New.

The New Piece properties dialog box opens.

The piece name as well as the creation date and

time are automatically specified.
2. If required, specify other standard information
for the new piece.
3. Click Create.

381
REPEATING AN INSPECTION INSPECT MULTIPLE PIECES

4. By default, Play Inspection is automatically

launched, guiding the user through the steps
necessary to calculate the measurement
objects for the new piece. The inspection is
based on the properties of the previous
inspected piece.
When required, the inspection sequence is paused
and a message is displayed to indicate that a
manual action is required.

5. If required, use the Pause, Skip Current

Operation, and Stop buttons to interrupt or
modify the inspection process.

A message is displayed when the new piece inspection is finished.

Results

The new inspection is completed and the The results of the inspection performed in
measurement objects of piece 2 are displayed piece 2 are shown in the 3D scene.
in the Tree View. A green check indicates the
measured status.

Notes

The inspection sequence can also be launched manually at

any time by choosing Tools > Piece > Play Inspection.

If a measurement object cannot be calculated, a warning

message is displayed. The message can be used for
troubleshooting purposes. The problematic objects are
flagged in the Tree View with an X overlay.

382
REPEATING AN INSPECTION INSPECT MULTIPLE PIECES

Customizing guiding instructions

During an inspection, standard on-screen messages guide
the operator through probing the piece properly.
Additional guidance can also be provided through custom
instructions or images for any Data objects or
measurement objects.

Objective: Repeat an initial inspection on a new piece

using custom guidance.

Required: A completed inspection project.

Steps

1. In the Tree View, select a Data object or a

measurement object.
2. Choose Edit > Object Properties.
The Properties dialog box opens.
3. Click the Measurement tab.
4. In the Guiding instructions section, select
Message and/or Image.
For measurement objects, these parameters are
offered only when the measurement method is
Custom, Undefined, or Probe.
In the Message area, enter custom
instructions.
Under the Image area, click the import
button and load a drawing or image file that
illustrates the instructions. The image is
displayed in the viewing area.
5. Click Apply.

383
REPEATING AN INSPECTION INSPECT MULTIPLE PIECES

Results

The custom message and image are displayed

during Play Inspection.

Notes

Custom guiding instructions can also be specified for Data alignment and Data color map
objects. These parameters are available in the property sheet of the object, respectively on the
Data alignment and the Data color map tabs.

384
GUIDED FEATURE PROBING INSPECT MULTIPLE PIECES

Guided feature probing using measurement points

In metrology, it is important to reduce the number of factors that could affect measurement
results. For example, when performing a part inspection by probing, controlling the location
of the points that are to be probed is sometimes desired.

This is especially useful when setting up a project for a multipiece inspection process, where
multiple instances of a part are inspected. In order to obtain meaningful results, each
measurement of the part must be performed in the exact same way.

When probing features, the repeatability of each measurement depends largely on the
number and the location of the probed data points of each feature. Adding measurement
points to features provides guidance as to where the points should be probed, instead of
randomly probing points on the part for every new inspection.

There are three main steps when using measurement points for guidance:

1. Features are created.

2. The measurement method is set to Probe, the

Guided point acquisition mode is configured,
and measurement points are defined for each
feature that will be probed.

3. When measuring the piece, the features are

probed using measurement points as guidance.

385
GUIDED FEATURE PROBING INSPECT MULTIPLE PIECES

Configuring the guided point acquisition mode

It is possible to configure whether the acquisition of a features probed data points is guided
or not. The guided point acquisition mode is used to define measurement points at the
locations and the order in which data points should be probed.

Once the guided acquisition mode is set, parameters are made available to configure the
acquisition.

Parametric information that defines the nominal components of features can be used to
define the measurement points.

Objective: Configure the guided acquisition mode for features.

Required: The project contains features with at least the nominal primitives.

Steps

1. In the Tree View, select the feature to which

measurement points will be added.
2. Choose Edit > Object Properties.
The Properties dialog box opens.
3. Click the Measurement tab.
4. Set the Method to Probe.

In the Point acquisition section:

5. In the Mode list, select Guided.

6. Set the point acquisition Order.
Select Sequential to specify that the
measurement points will be used to guide
point acquisition in the order of the
measurement points list.
Select Auto-Detect to specify that the
measurement points will be used to guide
point acquisition in any order.
7. Set the Guiding sphere radius.
Sets the size of the spheres used to guide the user
to the location of the measurement points while
probing.
8. If Limit acquisition to radius is selected,
points can only be acquired when the probe is
within the specified radius.

386
GUIDED FEATURE PROBING INSPECT MULTIPLE PIECES

9. Set the Measurement Points parameter.

Select From Nominal to use the nominal
component of the feature to define the
measurement points.
See the following sections for the parameters
related to each feature type.
Select Custom to use probed points of the
measured component of the feature or to
anchor measurement points directly in the
3D scene.

Then, click Measurement Points to the right

of the list box to open the Measurement
Points pane to define and edit measurement
points. See Defining measurement points from
the nominal component on page 387.
10. Click Apply.
Measurement points are added to the feature
based on the set parameters.

Defining measurement points from the nominal component

When defining measurement points using From Nominal, the Point acquisition section
offers both general and feature-specific parameters that are used to configure the
measurement points defined from the nominal component of a feature.

Setting the parameters for line features

Objective: Define measurement points from the nominal component of a feature.

Required: The project contains a feature with a nominal component.

Steps

1. In the Tree View, select the feature to which

measurement points will be added.
2. Choose Edit > Object Properties.
The Properties dialog box opens.
3. Click the Measurement tab.
4. Set the Method to Probe.
5. Set the point acquisition Mode to Guided.

387
GUIDED FEATURE PROBING INSPECT MULTIPLE PIECES

6. Set the Location, which specifies the location

of the feature on the part:
Click Convex Edge when the line is located
on an edge with an angle pointing outwards.
Click Concave Edge when the line is on an
edge with an angle pointing inwards.
7. Enter the Number of points that are evenly
distributed along the line.
8. Specify the Offset to plane distance between
the feature plane and the measurement points.
The direction of offset is based on the
Location.
9. Set the Measurement side:
Click Left when the measurement points are
located on the left side of the line and the
material is on the right side of the line.
Click Right when the measurement points
are located on the right side of the line and
the material is on the left side of the line.
10. Click Apply and close the Properties dialog box.

Results

Measurement points are defined using the nominal

primitive of the selected line.

388
GUIDED FEATURE PROBING INSPECT MULTIPLE PIECES

Setting the parameters for plane features

Objective: Define measurement points from the nominal component of a feature.

Required: The project contains a feature with a nominal component.

Steps

Along Boundary
This pattern is used to distribute measurement points along the external boundary of the
plane.

1. In the Tree View, select the feature to which

measurement points will be added.
2. Choose Edit > Object Properties.
The Properties dialog box opens.
3. Click the Measurement tab.
4. Set the Method to Probe.
5. Set the point acquisition Mode to Guided.
6. Set the pattern to Along Boundary.
7. Specify the Number of points distributed
along the boundary.

Results

Measurement points are defined using the nominal

primitive of the selected plane.

389
GUIDED FEATURE PROBING INSPECT MULTIPLE PIECES

Grid
This pattern defines uniformly-spaced measurement points by sampling a grid that covers the
plane.

1. In the Tree View, select the feature to which

measurement points will be added.
2. Choose Edit > Object Properties.
The Properties dialog box opens.
3. Click the Measurement tab.
4. Set the Method to Probe.
5. Set the point acquisition Mode to Guided.
6. Set the pattern to Grid.
7. Set the Sampling step value of the grid.

Results

Measurement points are defined using the

nominal primitive of the selected plane.

390
GUIDED FEATURE PROBING INSPECT MULTIPLE PIECES

Setting the parameters for circle features

Objective: Define measurement points from the nominal component of a feature.

Required: The project contains a feature with a nominal component.

Steps

1. In the Tree View, select the feature to which

measurement points will be added.
2. Choose Edit > Object Properties.
The Properties dialog box opens.
3. Click the Measurement tab.
4. Set the Method to Probe.
5. Set the point acquisition Mode to Guided.
6. Set the Location, which specifies the location
of the feature on the part:
Click Top when the circle is located at the top
of the part geometry.
Click Bottom when the circle is located at
the bottom of the part geometry.
The in-space orientation of the circle feature
that is considered comes from its nominal
component.
7. Enter the Number of points that are evenly
distributed along the circle.
8. Specify the Offset to plane distance between
the plane of the circle and the measurement
points. The offset direction is based on the
Location.
9. Click Apply and close the Properties dialog box.

Tip
Top location of an internal circle.

391
GUIDED FEATURE PROBING INSPECT MULTIPLE PIECES

Bottom location of an internal circle.

Results

Measurement points are defined using the

nominal primitive of the selected circle.

Notes

The icons displayed for the Location are based on the in-space orientation of the nominal
component of the feature.

For an external circle, the Top and Bottom location

icons are shown to the right.

Setting the parameters for slot features

Objective: Define measurement points from the nominal component of a feature.

Required: The project contains a feature with a nominal component.

Steps

1. In the Tree View, select the feature to which

measurement points will be added.
2. Choose Edit > Object Properties.
The Properties dialog box opens.
3. Click the Measurement tab.
4. Set the Method to Probe.
5. Set the point acquisition Mode to Guided.

392
GUIDED FEATURE PROBING INSPECT MULTIPLE PIECES

6. Set the Location, which specifies the location

of the feature on the part:
Click Top when the slot is located at the top
of the part geometry.
Click Bottom when the slot is located at the
bottom of the part geometry.
The in-space orientation of the slot feature that
is considered comes from its nominal
component.
7. Enter the Number of points per arc that are
evenly distributed along each arc.
8. Specify the Offset to plane distance between
the plane of the slot and the measurement
points. The offset direction is based on the
Location.
9. Click Apply and close the Properties dialog box.

Tip
Top location of an internal slot.

Bottom location of an internal slot.

Results

Measurement points are defined using the

nominal primitive of the selected slot.

393
GUIDED FEATURE PROBING INSPECT MULTIPLE PIECES

Notes

The icons displayed for the Location are based on the in-space orientation of the nominal
component of the feature.

For an external slot, the Top and Bottom location

icons are shown to the right.

Setting the parameters for rectangle features

Objective: Define measurement points from the nominal component of a feature.

Required: The project contains a feature with a nominal component.

Steps

1. In the Tree View, select the feature to which

measurement points will be added.
2. Choose Edit > Object Properties.
The Properties dialog box opens.
3. Click the Measurement tab.
4. Set the Method to Probe.
5. Set the point acquisition Mode to Guided.
6. Set the Location, which specifies the location
of the feature on the part:
Click Top when the rectangle is located at the
top of the part geometry.
Click Bottom when the rectangle is located
at the bottom of the part geometry.
The in-space orientation of the rectangle
feature that is considered comes from its
nominal component.
7. Enter the Number of points per side that are
evenly distributed along each side.
8. Specify the Offset to plane distance between
the plane of the rectangle and the
measurement points. The offset direction is
based on the Location.
9. Click Apply and close the Properties dialog box.

394
GUIDED FEATURE PROBING INSPECT MULTIPLE PIECES

Tip
Top location of an internal rectangle.

Bottom location of an internal rectangle.

Results

Measurement points are defined using the

nominal primitive of the selected rectangle.

Notes

The icons displayed for the Location are based on the in-space orientation of the nominal
component of the feature.

For an external rectangle, the Top and Bottom

location icons are shown to the right.

395
GUIDED FEATURE PROBING INSPECT MULTIPLE PIECES

Setting the parameters for polygon features

Objective: Define measurement points from the nominal component of a feature.

Required: The project contains a feature with a nominal component.

Steps

1. In the Tree View, select the feature to which

measurement points will be added.
2. Choose Edit > Object Properties.
The Properties dialog box opens.
3. Click the Measurement tab.
4. Set the Method to Probe.
5. Set the point acquisition Mode to Guided.
6. Set the Location, which specifies the location
of the feature on the part:
Click Top when the polygon is located at the
top of the part geometry.
Click Bottom when the polygon is located at
the bottom of the part geometry.
The in-space orientation of the polygon feature
that is considered comes from its nominal
component.
7. Enter the Number of points per side that are
evenly distributed along each side.
8. Specify the Offset to plane distance between
the plane of the polygon and the measurement
points. The offset direction is based on the
Location.
9. Click Apply and close the Properties dialog box.

Tip
Top location of an internal polygon.

396
GUIDED FEATURE PROBING INSPECT MULTIPLE PIECES

Bottom location of an internal polygon.

Results

Measurement points are defined using the

nominal primitive of the selected polygon.

Notes

The icons displayed for the Location are based on the in-space orientation of the nominal
component of the feature.

For an external polygon, the Top and Bottom

location icons are shown to the right.

397
GUIDED FEATURE PROBING INSPECT MULTIPLE PIECES

Setting the parameters for ellipse features

Objective: Define measurement points from the nominal component of a feature.

Required: The project contains a feature with a nominal component.

Steps

1. In the Tree View, select the feature to which

measurement points will be added.
2. Choose Edit > Object Properties.
The Properties dialog box opens.
3. Click the Measurement tab.
4. Set the Method to Probe.
5. Set the point acquisition Mode to Guided.
6. Set the Location, which specifies the location
of the feature on the part:
Click Top when the ellipse is located at the
top of the part geometry.
Click Bottom when the ellipse is located at
the bottom of the part geometry.
The in-space orientation of the ellipse feature
that is considered comes from its nominal
component.
7. Enter the Number of points that are evenly
distributed along the ellipse.
8. Specify the Offset to plane distance between
the plane of the ellipse and the measurement
points. The offset direction is based on the
Location.
9. Click Apply and close the Properties dialog box.
Tip
Top location of an internal ellipse.

398
GUIDED FEATURE PROBING INSPECT MULTIPLE PIECES

Bottom location of an internal ellipse.

Results

Measurement points are defined using the

nominal primitive of the selected ellipse.

Notes

The icons displayed for the Location are based on the in-space orientation of the nominal
component of the feature.

For an external ellipse, the Top and Bottom

location icons are shown to the right.

399
GUIDED FEATURE PROBING INSPECT MULTIPLE PIECES

Setting the parameters for cylinder features

Objective: Define measurement points from the nominal component of a feature.

Required: The project contains a feature with a nominal component.

Steps

1. In the Tree View, select the feature to which

measurement points will be added.
2. Choose Edit > Object Properties.
The Properties dialog box opens.
3. Click the Measurement tab.
4. Set the Method to Probe.
5. Set the point acquisition Mode to Guided.
6. Enter the Number of circles, which specifies
the number of equidistant circles on which
measurement points are defined.
7. Enter the Number of points per circle, which
specifies the number of measurement points
that are evenly distributed along each defined
circle.
8. Enable the Max Depth option, if needed. It
allows users to define the maximum distance
of the deepest circle. The depth considers the
axis orientation of the cylinder.
9. Click Apply and close the Properties dialog box.

Results

Measurement points are defined using the

nominal primitive of the selected cylinder.

400
GUIDED FEATURE PROBING INSPECT MULTIPLE PIECES

Setting the parameters for cone features

Objective: Define measurement points from the nominal component of a feature.

Required: The project contains a feature with a nominal component.

Steps

1. In the Tree View, select the feature to which

measurement points will be added.
2. Choose Edit > Object Properties.
The Properties dialog box opens.
3. Click the Measurement tab.
4. Set the Method to Probe.
5. Set the point acquisition Mode to Guided.
6. Enter the Number of circles, which specifies
the number of equidistant circles on which
measurement points are defined.
7. Enter the Number of points per circle, which
specifies the number of measurement points
that are evenly distributed along each defined
circle.
8. Enable the Max Depth option, if needed. It
allows users to define the maximum distance
of the deepest circle. The depth considers the
axis orientation of the cone.
9. Click Apply and close the Properties dialog box.

Results

Measurement points are defined using the

nominal primitive of the selected cone.

401
GUIDED FEATURE PROBING INSPECT MULTIPLE PIECES

Setting the parameters for sphere features

Objective: Define measurement points from the nominal component of a feature.

Required: The project contains a feature with a nominal component.

Steps

1. In the Tree View, select the feature to which

measurement points will be added.
2. Choose Edit > Object Properties.
The Properties dialog box opens.
3. Click the Measurement tab.
4. Set the Method to Probe.
5. Set the point acquisition Mode to Guided.
6. Enable the Point on top of the sphere, if
needed. This creates a measurement point at
the top of the sphere.
7. Enter the Number of circles, which specifies
the number of equidistant circles on which
measurement points are defined.
8. Enter the Number of points per circle, which
specifies the number of measurement points
that are evenly distributed along each defined
circle.
9. For the First circle:
Set the Angle from top at which the first circle
is positioned.
10. For the Last circle:
Set the Angle from top at which the last circle
is positioned.
11. Click Apply and close the Properties dialog box.

402
GUIDED FEATURE PROBING INSPECT MULTIPLE PIECES

Results

Measurement points are defined using the

nominal primitive of the selected sphere.

Notes

The parameters for the sphere are illustrated below.

Point on top First circle angle

First circle
Last circle
angle

Last circle

403
GUIDED FEATURE PROBING INSPECT MULTIPLE PIECES

Setting the parameters for polyline features

Objective: Define measurement points from the nominal component of a feature.

Required: The project contains a feature with a nominal component.

Steps

1. In the Tree View, select the feature to which

measurement points will be added.
2. Choose Edit > Object Properties.
The Properties dialog box opens.
3. Click the Measurement tab.
4. Set the Method to Probe.
5. Set the point acquisition Mode to Guided.
6. Set the Measurement points to From
Nominal.
7. Click Apply and close the Properties dialog box.

Results

Measurement points are defined at each vertex of

the nominal primitive of the selected polyline.

404
GUIDED FEATURE PROBING INSPECT MULTIPLE PIECES

Notes

Since polylines do not have surface information,

each measurement point only contains a location
(x, y, and z coordinates) but no orientation.

Defining custom measurement points

The Measurement Points pane can be used to define, visualize, and edit measurement points
on features. Two creation methods are offered:

Define Measurement Points from Probed Data Points: Measurement points are
defined automatically from probed data points.
Anchor Measurement Points: Measurement points are anchored directly on the feature
or on a Reference object in the 3D scene.

Measurement points are only available for features that support the Probe or the CNC Probe
measurement method, and they are specific to each feature.

Defining measurement points from probed data points

Objective: Define measurement points from probed data points for selected features.

Required: The selected feature must have probed data points.

Steps

1. Open the Measurement Points pane:

by clicking Measurement Points in the
Properties of the feature (see Configuring
the guided point acquisition mode on
page 386).
by right-clicking the feature and choosing
Edit > Measurement Points.

2. Click Define Measurement Points from

Probed Data Points.

405
GUIDED FEATURE PROBING INSPECT MULTIPLE PIECES

Results

Measurement points are defined using probed data points obtained from the selected
feature.

Defining measurement points by anchoring

Objective: Define measurement points by anchoring points on features.

Required: The IMInspect project must have one or more features that support the Probe
measurement method.

Steps

1. Open the Measurement Points pane:

by clicking Measurement Points in the
Properties of the feature (see Configuring
the guided point acquisition mode on
page 386)
by right-clicking the feature and choosing
Edit > Measurement Points

2. Click Anchor Measurement Points to launch

an interactive anchoring mode.

3. In the 3D scene, click directly on the feature to

create the measurement points.
The number of measurement points must be
equal to or larger than the minimum number of
points for that feature type.
4. Right-click to exit the anchoring mode.

406
GUIDED FEATURE PROBING INSPECT MULTIPLE PIECES

Results

Measurement points are defined on the feature.

Anchoring points on features that have arcs or sides

Slot, rectangle, and polygon features are probed using individual arcs or sides. To anchor
measurement points for these features, the arc or side associated with each measurement
point must be specified in order to provide the appropriate guidance. The Anchor
Measurement Points dialog box is used to specify which arc or side the measurement point
will be anchored on.

Steps

1. In the Measurement Points pane, click Anchor

Measurement Points to launch an interactive
anchoring mode.

The Anchor Measurement Points dialog box

opens.
2. From the Step list, select the corresponding arc
or side for which measurement points will be
anchored.

3. In the 3D scene, click directly on the feature or

on the Reference object to anchor the
measurement points at the desired locations.
The number of measurement points must be
equal to or larger than the minimum number of
points.

407
GUIDED FEATURE PROBING INSPECT MULTIPLE PIECES

4. From the list, select the next arc or side and

continue anchoring the points on the feature.
Repeat the procedure for the other arcs or sides.
5. Right-click to exit the anchoring mode.

Results

Measurement points are defined on the feature for each arc or side.

Editing and deleting measurement points

The Measurement Points pane offers various tools to edit and delete measurement points.

Editing measurement points numerically

Measurement points can be edited numerically by editing their position and normal.

Steps

1. In the Measurement Points pane, select the

measurement point that will be edited.
Use a multiple selection to edit more than one
measurement point at a time.
2. Click Edit Measurement Points.

408
GUIDED FEATURE PROBING INSPECT MULTIPLE PIECES

The Edit Measurement Points dialog box

opens.
3. Specify the Position and Normal for the
measurement point.
The measurement point x, y, or z coordinates can
also be edited directly in the Measurement Points
pane. Click a coordinate to edit its value.

Editing measurement points interactively

Measurement points can be edited interactively by dragging them in the 3D scene.

Steps

1. Click Drag Measurement Points to launch an

interactive dragging mode.

2. Relocate measurement points by dragging

them directly in the 3D scene.
3. Right-click to exit the dragging mode.

409
GUIDED FEATURE PROBING INSPECT MULTIPLE PIECES

Editing arcs and sides of measurements points

In cases where a measurement point was anchored to the wrong side or arc, it is possible to
correct this and change the arc or the side the measurement points belong to.

Steps

1. In the Measurement Points pane, click the

measurement point that is on the wrong
arc or side and drag it to the correct arc or
side.

Deleting selected measurement points

Measurement points can be deleted by selecting them and launching the deletion operation.

Steps

1. In the Measurement Points pane, select the

measurement points that will be deleted.
Use a multiple selection to delete more than one
measurement point at a time.
2. Click Delete Measurement Points.

Deleting measurement points interactively

Measurement points can be deleted interactively.

Steps

1. Click Delete Measurement Points

Interactively to launch an interactive deleting
mode.

2. Click the measurement points in the 3D scene

to delete them.
3. Right-click to exit the mode.

410
GUIDING FEATURE PROBING INSPECT MULTIPLE PIECES

Probing features using measurement points

Once the guided acquisition mode has been configured (Configuring the guided point
acquisition mode on page 386) and the measurement points have been defined (Defining
measurement points from the nominal component on page 387), via the properties of the
feature, the probing in a guided mode can be launched.

The order in which the points are probed is controlled by the specified acquisition Order:

Sequential: The next measurement point is the first unmeasured point in the list of
measurement points.
Auto-Detect: The next measurement point is the one closest to the probing device.

The measurement point guiding spheres are highlighted in the 3D scene. The Limit
acquisition to radius option allows restricting the point acquisition for each measurement
point to a precise zone delimited by cylinders or by spheres (for point with no normal)
centered at the measurement points. The next measurement point guiding sphere is always
highlighted as follows in the 3D scene:

If the Limit acquisition to radius option is set, it is highlighted in red if the probing
device is out of the zone, and in green if it is in the zone. A sound also indicates if the
probing device is within the zone or not.
If the Limit acquisition to radius option is not set, the guiding zone of the
measurement point closest to the probing device is highlighted in green.

Once a measurement point has been used for point acquisition, its guiding zone is no longer
displayed in the 3D scene.

Example

Defined measurement points on a plane feature.

411
GUIDING FEATURE PROBING INSPECT MULTIPLE PIECES

Probing a plane feature in the Sequential order. The points are probed in numerical order.

Probing a plane feature in the Auto-Detect order. The points are probed in any order.

412
GUIDING FEATURE PROBING INSPECT MULTIPLE PIECES

Using measurement points with features probed in

multiple device positions
Sometimes, features need to be probed from multiple device positions. This can be due to the
size of the part or the physical constraints that make it impossible to access a feature from a
certain position.

Defining measurement points using the From Probed Data Points method will automatically
group the measurement points, taking into consideration the device positions in which they
were gathered.

Objective: Probe a feature from multiple device positions using measurement points as
guidance.

Required: An IMInspect project that contains at least one feature with defined measurement
points grouped in different device positions.

Steps

1. Open the project and click Play Inspection.

2. Probe the points in the first device position.

413
GUIDING FEATURE PROBING INSPECT MULTIPLE PIECES

3. Move the device.

For more information on multiple device
positions, see Working with multiple device
positions on page 435.

4. Continue the Play Inspection sequence.

5. Probe points in the second device position.

6. If more than two device positions are required,

repeat steps 3 to 5 until the feature is
completely probed.

Results

When playing the inspection of a project that contains a feature originally created by probing,
using multiple device positions and the From Probed Data Points method measurement
points, PolyWorks prompts the user to probe the feature displaying only the measurement
points that belong to the first position. Then the sequence is paused and the user is prompted
to move the device. Once the new device position is created, the user is prompted to probe
the feature displaying corresponding measurement points.

414
The Sequence Editor
In IMInspect Probing, the Tree View pane lists the measurement objects needed for the
inspection. These objects contain all the information related to how the measurements must
take place and the links that exist between the objects. In multipiece inspection, the Play
Inspection tool plays by default an autogenerated measurement sequence based on the
objects in the Tree View. It can also play a measurement sequence that has been customized
through the Sequence Editor.

The Sequence Editor can be used to customize the autogenerated sequence or to create a
custom sequence where steps can be added one by one. Instructions for the operator can be
added, the order of measurements can be changed, and additional steps for measuring can
be included. Also, by inserting macro scripts, many functionalities can be added, such as those
related to reporting.

The Sequence Editor pane

To open the Sequence Editor pane:

1. Choose Tools > Sequence Editor.

Alternatively, click the Sequence Editor button
from the Multipiece Inspection toolbar.

The Sequence Editor pane is displayed. It features a menu bar, a standard toolbar, and a
sequence area.

Menu bar

Standard
toolbar

Sequence
area

415
Menu bar
Provides access to all functionalities of the Sequence Editor.

Standard toolbar
Provides quick access to the main functionalities of the Sequence Editor.

New

Split button that allows creating a new sequence, either from the autogen-
erated sequence or from scratch.

Insert Step

Displays the Insert toolbar (see Insert toolbar on page 417) that offers quick
access to the steps that can be added to the sequence.

Record

Starts the recording mode.

Execute Next Step

Executes the next step in the sequence based on the marker position.

Execute Steps

Executes steps starting at the marker position.

Stop Execution

Stops the execution of the sequence.

Reset Execution Status

Removes all information concerning step execution. The marker is

positioned at the beginning of the sequence.

416
Insert toolbar
To open the Insert toolbar, click the Insert button on the Standard toolbar. It offers quick
access to the steps that can be added to the sequence.

Guiding Instructions

Inserts a step used to add text and/or an image that will be displayed when
running the sequence.

Question

Inserts a question step composed of a question and a receiving answer

variable.

Conditional Statement

Inserts a conditional statement based on the content of an answer

variable.

Comment

Inserts text to provide useful information about the sequence.

Coordinate System

Inserts a step to activate a different coordinate system in the sequence.

Alignment

Inserts a step to create or activate a Data alignment.

Device Position

Inserts a step to activate a device position or to perform a move device

operation.

Data Object

Inserts a step to acquire a Data object.

Measurement Object

Inserts a step to measure an object.

417
 Add Probed Data Points

Inserts a step to add probed data points to a specified object.

Macro Script

Inserts a macro script by creating a new one or by importing a copy of a

script.

Sequence area
This area lists all the steps that make up a sequence.

Execution status
color

Step number

Marker

Edit step
shortcut

Icons

Marker

The marker sets the position from which the execution of the sequence starts or from which
sequence steps are added by the recording mode. As well, the real-time sequence validation
considers the steps starting at the marker position. Choose Sequence > Set Marker Position.
Alternatively, the marker can be dragged to the desired position.

Step number

Incremental number for each sequence step.

Execution status color

418
The execution status of steps is indicated by their
background color.
Light green: step has been executed.
White: step has not been executed.
Gray: step was interactively skipped during
the execution of the sequence.

Icons

Warning icons are displayed to inform the

user of a potential problem.
Error icons are displayed when there is an
error in the step.
Information icons are displayed to give
additional information to the user.
Moving the mouse pointer over an icon displays a
tooltip with the details.

Edit step shortcut

Opens a dialog box to define or edit a sequence step. The content of the dialog box depends
on the step that is currently defined or edited. For example:

Guiding Instructions

Insert a step to add instructions (message and/

or image) for the operator, for example, to
illustrate how to mount a part into its fixture.
For the image, click the import button and load
a drawing or image file that illustrates the
instructions. The image is displayed in the
viewing area.

419
Using the Sequence Editor

Creating a measurement sequence

A measurement sequence is an ordered list of operations, called steps, created to measure
unmeasured objects.

From the autogenerated sequence

When the nominal inspection project is ready, it is possible to create a measurement
sequence from the autogenerated one.

Steps

1. Choose Tools > Sequence Editor.

Alternatively, click the Sequence Editor button
on the Multipiece Inspection toolbar.

2. In the Sequence Editor pane, choose

Sequence > Create from Autogenerated Sequence.

3. Type the Name and Description of the

sequence.
4. Click Create.

Results

The sequence is created. It contains the

objects from the Tree View along with initial
conditions and device positions.
The sequence is ready to be customized. See
Customizing a measurement sequence on
page 422.

420
From recorded actions
Once a measurement device is properly configured and connected, it is possible to start the
inspection of a part and create the sequence at the same time.

Steps

1. Choose Tools > Sequence Editor.

Alternatively, click the Sequence Editor button
from the Multipiece Inspection toolbar.

2. In the Sequence Editor pane, choose

Sequence > New.

3. Type the Name and Description of the

sequence.
4. Click Create.

5. Start the recording mode. Choose

Edit > Start Recording.
Actions performed subsequently are recorded
and added to the sequence (for example,
alignments, activation of a coordinate system,
and measurement operations).

To stop recording actions, choose Edit > Stop

Recording.

Results

A sequence is created. The initial conditions

are automatically added to the sequence
area.

421
Customizing a measurement sequence
Once the sequence is created, changes can be made. For example, change the order of
sequence steps to optimize an inspection, add guiding messages and images to facilitate the
inspection of the part, or include macro scripts to increase efficiency.

Modifying the order of sequence steps

Steps in the sequence can be reordered, if required.

Steps

1. In the Sequence Editor pane, select the

sequence steps that will be moved in the
sequence area.

2. Drag the selected sequence steps to the

desired position in the sequence.

Results

In the Sequence Editor, the steps are displayed at

the new position.

422
Adding sequence steps
Steps can be added to the sequence. They can be broadly categorized as follows:

General steps
Context steps
Measurement steps
Macro script steps

When a step is added, a contextual dialog box is opened to specify a Tree View object or
required information. If an object is preselected in the Tree View, then the inserted step is
automatically set to the selected object.

Choosing from the Insert menu

Steps

1. In the Sequence Editor pane, choose Insert >

[select step to add].
A step is added to the sequence and a
contextual dialog box is displayed.

2. Specify the required information in the

contextual dialog box.

3. Click anywhere outside the dialog box to

confirm.

Notes

Steps added using the Insert menu can be

used as placeholders if relevant objects have
not been created in the project. A warning icon
appears. These steps must be defined before
executing the sequence.

Moving the mouse pointer over the object

displays a tooltip with recommended actions
to correct the issue.

423
 When steps are inserted, they appear at the
end of the sequence, except if there is a
selection in the sequence. In that case, the step
is inserted above the selection.

Dragging from the Tree View

Steps

1. In the Tree View, select the objects associated

with the steps that will be added to the
sequence.

2. Drag the objects to the desired position in the

active sequence.

Notes

Only existing objects can be dragged from the Tree View and, consequently, only the
associated steps can be added this way.

Inserting macro scripts

Steps

1. In the Sequence Editor pane, choose Insert >

Macro Script.
Two options are offered.
New: The Macro Script Editor opens,
allowing users to create a macro script.
Import: Allows users to browse for an
existing macro script.

424
Results

The step is added to the sequence.

Editing sequence steps

Once added, sequence steps can be modified by accessing the steps contextual dialog box.

Steps

1. In the Sequence Editor pane, select the

sequence step that will be modified, then
choose Edit > Step.
Alternatively, click the Edit Step shortcut arrow
that corresponds to the step to be modified.
The sequence step contextual dialog box
opens.

2. Set the required parameters.

Defining conditional blocks

Depending on the inspection requirements, some measurement objects may not be included
in the inspection.

It is possible to define these requirements, in a measurement sequence, as conditional blocks

by inserting questions and conditional statement steps.

Inserting questions into a sequence allows users to store the answer into a variable and,
based on the answer, the sequence executes the steps grouped under a conditional
statement.

Steps

1. Choose Insert > Question.

425
2. Type in a Yes or No question.
3. From the Answer variable list, select the
variable where the answer will be stored.
If a new variable must be created, type the
Variable name.
4. Set the initial value of the variable using the
Sequence validation answer list. Refer to the
Notes section for more information.

5. Select the steps that are affected by the

conditional statement.
6. Choose Insert > Conditional Statement.

7. Select the variable that will be used in the

conditional statement.
8. Set the conditional value of the variable. If the
variable is equal to the answer, the steps that
are part of the conditional statement are
executed. Otherwise, they are shown in gray
and will not be executed.

Results

The steps are added to the sequence.

The steps that were selected when the conditional

statement was inserted are grouped under the
conditional statement.

Notes

The Sequence validation answer allows validating the corresponding conditional statement
steps for a given scenario.

This value does not affect the execution of the conditional statement.

426
STATISTICAL PROCESS CONTROL INSPECT MULTIPLE PIECES

Evaluating pieces using Statistical Process Control

Statistical Process Control (SPC) is a tool that analyzes common measurements between
multiple pieces for repeatability. Reviewing SPC results tells the user whether a part is being
manufactured predictably or not.

IMInspect Probing offers two SPC tools:

Object Control SPC:

Analyzes measurement object dimensions, such as hole diameter, flatness, and length.

Surface Data SPC:

Analyzes the range of part shape using color maps.

Analyze part dimensions for repeatability using Object

Control SPC
The Object Control SPC tool analyzes the values of any
measurement common to multiple pieces in the inspection
project. Results are displayed in graphic and tabular format in
the Object Control SPC Results pane.

Objective: Display statistics of measured object values for all

pieces.

Required: A completed inspection project containing more than one inspected piece.

Steps

1. In the Tree View of a piece, select the objects to

consider in the SPC analysis.

2. Choose Tools > Statistical Process Control > Object

Controls.

3. The Object Control SPC dialog box opens, with a

list of the inspected pieces.
Pieces can be excluded from analysis by
deselecting them in the list.

4. In the Options section, specify the Sample size.

See the following section for more information.

427
STATISTICAL PROCESS CONTROL INSPECT MULTIPLE PIECES

Results

The value for each of the five pieces is displayed for the selected measurement object in the
Object Control SPC Results pane.

Statistics of the piece values is shown in the object annotation.

428
STATISTICAL PROCESS CONTROL INSPECT MULTIPLE PIECES

Sample size
A sample consists of a collection of pieces. The sample size determines how many pieces
represent a sample and is used to calculate mean values. The default sample size is 1.

Sample size equal to 1: I-MR charts are generated, consisting of the Individuals (I) chart
and the Moving Range (MR) chart.
Sample size greater than 1: Xbar-R charts are generated, consisting of the Mean (Xbar)
chart and the Range (R) chart.

Understanding SPC results

The SPC tool offers different charts to analyze results. Depending on the sample size (1, or
more than 1), different charts are generated.

I-MR charts

Generated when the sample size is 1, the I-MR charts display information about the
performance of the process. They consist of:

Individuals (I) chart: It displays the

measured values per piece for the
selected control of the selected
measurement object, and the mean of
these values.

Moving Range (MR) chart: For the selected

control of the selected measurement
object, it displays the variation from the
previous piece, and the mean of these
variations.

429
STATISTICAL PROCESS CONTROL INSPECT MULTIPLE PIECES

Xbar-R charts

Generated when the sample size is greater than 1, the Xbar-R charts display information
about the behavior of the process and outcome over time. They consist of:

Mean (Xbar) chart: It displays the average

measured value per sample for the
selected control of the selected
measurement object, and the mean of
these values.

Range (R) chart: For the selected control

of the selected measurement object, it
displays the range of data in each sample,
and the mean of these ranges.

Trend charts

Trend charts display the measured value

per piece for the selected control of the
selected measurement object and the
mean of these values.

430
STATISTICAL PROCESS CONTROL INSPECT MULTIPLE PIECES

Sample statistics table

The Sample statistics table displays, per piece within each sample, the measured value for the
selected control of the selected measurement object, the mean and the range of these values,
and their average values.

Overall statistics table

The Overall statistics table displays statistics values such as the Mean, Std Dev, Min, Max, Cp,
Cpk, %Within Tol (percentage of pieces within tolerance), and more for the selected
measurement object.

Values per piece table

The Values per piece table displays the measured values per piece for the selected controls of
the selected measurement object.

431
STATISTICAL PROCESS CONTROL INSPECT MULTIPLE PIECES

Analyze part shape for repeatability using Surface Data

SPC
The Surface Data SPC tool analyzes the range in shape
of multiple pieces in the inspection project by
comparing them to the Reference object. Various
results can be displayed using a color map. They
include the range of variation, mean deviation, highest
deviating areas, and so on.

Objective: Display summaries of Data object shape for all pieces.

Required: A completed inspection project containing a Reference object and more than one
inspected piece.

Steps

1. Choose Tools > Statistical Process Control >

Surface Data Objects.
The Initialize Surface Data SPC dialog box and
the Surface Data SPC pane open.
2. In the Pieces list, select From Project.

3. In the Reference objects list, select an object.

The deviations of each piece from the Reference
object are measured. The color map displays
these deviations.

4. Specify Sampling step used to find points on

the Data objects at a uniform point spacing.
Value should be at least as large as the point
spacing of the Data objects, but small enough to
see meaningful details.

5. Specify the Max distance to use to measure

the deviations of the pieces from the Reference
object.

6. Click Initialize.

432
STATISTICAL PROCESS CONTROL INSPECT MULTIPLE PIECES

Results

The Surface Data SPC pane opens, listing the A color map in the 3D scene, generated on
pieces included in the analysis. Deselect the Reference object, is shown based on the
pieces to be removed from the analysis. Color map type specified in the Surface Data
SPC pane.
Tools used to initialize, reset, remeasure, report,
and change options are located on the right side
of the Surface Data SPC pane.

Notes

Pieces external to the IMInspect project can

also be used for Surface Data SPC analysis if
they are aligned to the Reference model.
Other piece locations are available in the
Pieces list in the Initialize Surface Data SPC
dialog box.

433
Work with multiple
device positions
MOVING THE DEVICE OR THE PART WORK WITH MULTIPLE DEVICE POSITIONS

Working with multiple device positions

There are many challenges to acquiring data points on large objects. Some objects are larger
than the measurement volume of a device. Sometimes, data must be acquired on a portion of
a part that is hidden from the measuring device. These situations demand that the device be
moved around the part to acquire the data. In IMInspect Probing, device positions address
this specific need.

The different device positions must be aligned to each other. One method is detailed in this
manual:

Using targets
From points obtained by probing targets

In the example illustrated below, a part is measured using a laser tracker in three different
device positions.

The active device position is displayed on the status bar, in the lower right corner of the
interface.

The Device Positions toolbar is located at the bottom of the IMInspect user interface.

It offers the following tools:

Define Measured Targets

Opens the Define Measured Device Position Targets dialog box from which
to measure the targets.

435
MOVING THE DEVICE OR THE PART WORK WITH MULTIPLE DEVICE POSITIONS

Move Device

Allows the creation of a new device position.

Manage Device Positions and Targets

Opens the Device Positions and Targets pane which allows visualizing the
different device positions and targets and editing them.

The basic acquisition workflow with multiple device

positions using targets
For this typical workflow, the part is inspected by probing, and probed targets are used for the
alignment. The targets can be defined from physical targets strategically placed on the part
and/or around the part, or they can be features (points, circles, spheres) on the part. Note that
a combination of physical targets and features on the part can be used.

Position 1

Define measured targets

Define the accessible targets of
position 1.

Probe objects
Measure the part by probing objects.
Note that the part needs to be
aligned to the Reference object to
probe certain types of objects.

Move device
Define a new device position and
physically move the device or the
part.

436
MOVING THE DEVICE OR THE PART WORK WITH MULTIPLE DEVICE POSITIONS

Position 2
Define measured targets
The acquisition of targets is
automatically launched.
Define all the accessible targets of
position 2. There must be a minimum
of three common targets, with the
previous position, for alignment.
There can be more targets than in
the previous position. Typically, these
will be used with targets in future
positions.

Probe objects
Measure the part by probing objects.
Note that the part needs to be
aligned to the Reference object to
probe certain types of objects.

Move device
Define a new device position and
physically move the device or the
part.

Position n
Repeat the process
Repeat this process for as many
positions needed to acquire the
required data.

437
MOVING THE DEVICE OR THE PART WORK WITH MULTIPLE DEVICE POSITIONS

Moving the device or the part by probing targets

A robust and repeatable method for defining targets is using
target locations. The targets can be on the part itself or placed
around it. The probe is used to define each target every time the
device or the part is moved, aligning the different setups
together.

Objective: Move the device or the part and align it to previous

data by probing device position targets.

Required: A probing device is available and ready to use. The required plug-ins are loaded.

Steps

1. In position 1, define the targets by choosing

Tools > Device Positions > Define Measured Device
Position Targets.
The Define Measured Device Position Targets
dialog box opens.

2. In the Method list, select Probe.

3. Set the Type to Point.

4. In the Submethod list, select Uncompensated.

The target will be acquired at the probe tip center.

5. Click Probe.

6. Probe all accessible stable target locations.

Three targets are a minimum to perform the
target alignment, but more are recommended.
The targets are listed in the Device Positions and
Targets pane.

7. Measure the part by probing objects.

Note that the part needs to be aligned to the
Reference object to probe certain types of
objects.

438
MOVING THE DEVICE OR THE PART WORK WITH MULTIPLE DEVICE POSITIONS

8. Physically move the device or part, and define a

new device position position 2 by choosing
Tools > Device Positions > Move Device.
The Move Device dialog box opens.
9. In the Alignment method list, select Targets.
10. Click OK.
The Define Measured Device Position Targets
dialog box opens.

11. Probe all accessible and stable target locations

to align position 2.
At least three targets must be the same as in
position 1. Although a minimum of three targets is
required to perform the target alignment, it is
recommended to use more targets.
The targets can be probed in any order.
The targets are listed in the Device Positions and
Targets pane, with alignment errors.

12. Continue probing the part in the new position.

Results

The new device position is aligned to the

previous device position.
New probing Data objects are created in
the Tree View to keep the device positions
independent of each other.

439
MOVING THE DEVICE OR THE PART WORK WITH MULTIPLE DEVICE POSITIONS

The probed targets and the alignment

accuracy are displayed in the Device
Positions and Targets pane.

Notes

All accessible targets should be measured from each device position. This ensures that plenty
of targets are available for future device position alignments. As soon as there are three
common targets between the device positions, the current device position is aligned. Adding
additional common targets strengthens the alignment.

To avoid ambiguous alignment solutions, physical targets should be placed in a

nonsymmetrical array. If necessary, target matches between device positions can be
edited manually. The Edit Target Match tool, found on the Target alignment
results tab of the Device Positions and Targets pane, allows defining specific target
match pairs.

When connected to a laser tracker probing device with the capability to orient to gravity, it is
possible to orient to gravity while creating the device position.

Bundle adjustment
Bundle adjustment optimizes the auto-match alignment of device positions by finding the
most probable effective location for each target through averaging, and aligns all instances of
the target to that location position. The effective location is updated every time a new device
position is added. This option gives best results when the entire part volume is measured such
that the last device position is adjacent to the first device position.

Without bundle adjustment, any target measured in more that one device position is always
aligned to the first measured instance of that target.

440
MOVING THE DEVICE OR THE PART WORK WITH MULTIPLE DEVICE POSITIONS

Objective: Activate bundle adjustment for target alignment.

Required: A project with multiple device positions aligned using targets.

Steps

1. Choose Tools > Options to access the IMInspect

options.
The IMInspect Options dialog box opens.

2. Open the Device Positions options page.

3. Select Bundle adjustment.
4. Click Apply.

5. Close the IMInspect Options dialog box.

Results

The alignment is updated, and the error for all targets is recalculated based on the new
effective target location.

Notes

Accuracy models are used to determine the most probable location for each target. It is
therefore important to set the proper accuracy model for each device position according to
the device used. The default accuracy model can be set from the Device Positions page in the
IMInspect options. Alternatively, a specific accuracy model can be set for each device position
in the Device positions tab of the Device Positions and Targets pane. Two bundle adjustment
accuracy models are available:

Uniform accuracy model

Digitizing arms have small measurement volumes and, as such, have fairly consistent
accuracy throughout that volume. For digitizing arms, the Uniform accuracy model is used.

441
MOVING THE DEVICE OR THE PART WORK WITH MULTIPLE DEVICE POSITIONS

Range and angle accuracy model

Laser trackers have large measurement volumes, and the point positional certainty varies
throughout that volume based on the distance and angle from the tracker. Therefore, for laser
trackers, the Range and angle accuracy model is used.

Device position uncertainty

When physically predetermining a set of target locations that can be measured from several
device positions, users can, by inadvertence or inexperience, set up their alignment targets in
ways that systematically produce unstable alignment solutions. It is possible to detect these
unreliable target setups by evaluating device position uncertainties. Here are some of the
most common problematic target setups:

The alignment targets of a device position are

nearly collinear.

The horizontal angular span of the alignment

targets of a device position is small.

442
MOVING THE DEVICE OR THE PART WORK WITH MULTIPLE DEVICE POSITIONS

The measurement device is moved along one

direction, and a new device position is aligned
by only using targets measured by the closest
previous device position, producing daisy-
chained device positions.

Objective: Measure the uncertainty of a device position.

Required: A project with two or more device positions. Bundle adjustment must be enabled.

Steps

1. Choose Tools > Device Positions > Manage

Positions and Targets. The Device Positions
and Targets pane opens.
2. Select the Device positions tab at the
bottom of the pane.

3. Click Evaluate Position Uncertainty.

The Device Positions options page offers
parameters related to uncertainty
computation.

Results

The uncertainty of the unlocked positions is calculated and shown in the Device Positions and
Targets pane along with a pass/fail test.

443
MOVING THE DEVICE OR THE PART WORK WITH MULTIPLE DEVICE POSITIONS

Notes

When targets are added or removed, the uncertainty values are considered out-of-date
and are removed. The uncertainty tool must be relaunched to update the uncertainty
values.
It is possible to modify the tolerance for the device position uncertainty on the Device
Position page of the IMInspect options.

444
Appendix
AUTOMATIC PROJECT UPDATE APPENDIX

Automatic project update

By default, IMInspect Probing projects are always automatically up to date. This means that
measurement objects, alignments, data color maps, report items and formatted reports are
automatically recalculated as necessary.

The icon of the Automatic project update status, located

at the right end section of the status bar, indicates
whether the automatic project update is activated or not.

If needed, the Automatic project update can be

activated/deactivated by clicking the arrow to the right of
the icon and selecting the Automatic project update
command. When activated, the command is preceded by
a check mark.

Troubleshooting the automatic project update

The update status of objects in the Tree View is
constantly monitored by the Automatic project
update function. In some cases, object updates
cannot be performed, such as when the
measurement parameters of an object do not allow
its remeasurement or when an object is linked to an
object that no longer exists. In these cases, a yellow
warning triangle is superimposed on the Automatic
project update icon on the status bar and a
notification is shown.

Choose Tools > Troubleshoot Project Update to display a dialog box that lists the objects in error
and a message for each.

446
AUTOMATIC PROJECT UPDATE APPENDIX

The following update status icons can be displayed on the object icon in the Tree View:

A red x mark indicates that the object is in error.

A yellow warning triangle indicates that the object could not be updated.

An anchor symbol indicates that the object is nonupdatable or rendered as such.

A clock icon indicates that the object is out-of-date. An object can have an out-of-date
status only when the Automatic project update is deactivated.

Moving the mouse pointer over the object

displays a tooltip with the details.

Operations that trigger an automatic project update

Common operations that trigger the automatic project update include:

Modifying a Data or Reference object by replacing the object or by deleting elements.

Changing the active alignment.
Opening a formatted report.

447
 APPENDIX

Setting and saving the user configuration

PolyWorks has a default standard configuration for the Workspace Manager and each
module. The standard configuration holds information about window sizes and positions,
display modes, selection modes, dialog box parameters, templates (annotations, controls, and
tables), and various module options like units and Options panel settings.

A user configuration also exists, which augments the standard configuration. As a user works
in the software, any changes to these settings and parameters can be saved in the user
configuration.

On the computer, the user configuration files are found in a folder

named .innovmetric.[version].

Each user can have their own personal user

configuration. The location of the user
configuration directory, by default within the
\User directory, is shown in the PolyWorks/
Workspace Manager Options dialog box.

Changes to the parameters and settings in the user configuration can be saved by choosing
Tools > Save User Configuration in any module. The saved settings become the default the next
time the module is launched. In the Workspace Manager, the current user configuration for all
modules can be exported by choosing Tools > User Configuration > Export. Likewise, an external
user configuration can be loaded by choosing Tools > User Configuration > Load.

448
 APPENDIX

Saving a compressed copy of a project

When only one specific inspection project needs to be shared or exported, it is possible to
create a compressed copy of this project directly from an open IMInspect Probing project.

When opening this compressed file in PolyWorks, or in the free PolyWorks|Viewer, a new
workspace is automatically created.

Objective: Share inspection results by saving a compressed copy of an inspection project.

Required: A completed, open inspection project.

Steps

1. To create a compressed copy of the project,

choose File > Save Compressed Copy.

2. In the message window that is displayed, click

OK.
The IMInspect Probing project is saved and
closed.
A file browser opens.

3. Browse for the location to save the file and click

Save.

Results

A copy of the project is saved to a new

workspace that is compressed and then
saved at the specified location as a .pwzip
file. It can be opened with PolyWorks or the
PolyWorks|Viewer.

Notes

From the Workspace Manager, it is also possible to create a compressed copy of one or more
IMInspect Probing projects. Simply open the workspace, select the projects, and choose File >
Export > Objects to Compressed Workspace.

449
 APPENDIX

Configuring the probing session

Most of the parameters that affect a probing session can be set in the IMInspect options. The
following steps present the options that are most frequently used. For more information,
refer to the IMInspect Reference Guide available from the Help menu.

Probing device options

The Probing Device page of the IMInspect Options offers all the configurable parameters
related to the device itself, such as the measurement mode and the compensation method.

Objective: Set the measurement mode and the compensation method for the selected
probing device.

Required: An open IMInspect Probing project. A probing device plug-in must be selected in
the Workspace Manager.

Steps

1. Choose Tools > Options.

The IMInspect Options dialog box opens.

Measurement Mode

1. In the Tree View of the IMInspect Options dialog

box, expand the Probing Device branch and
select Measurement Mode.

2. Select the measurement mode to be used when

acquiring data points.
For most devices, three measurement modes
are offered:
Single or Stationary: The probe/reflector
position is recorded when pressing the
acquisition button.

450
 APPENDIX

Continuous time: The probe/reflector

position is automatically recorded at each
time interval, once the acquisition button is
pressed (for some devices, by pressing and
holding down the acquisition button).
Continuous distance: The probe/reflector
position is automatically recorded at each
distance interval, once the acquisition button
is pressed (for some devices, by pressing and
holding down the acquisition button).

3. Specify the Time (ms) to be used for the

Continuous time mode.

4. Specify the Distance to be used for the

Continuous distance mode.

5. Click Apply.

Notes

The Single measurement mode offers the

Automatic stability trigger option which enables
automatically measuring a point, other than a
compensation point, as soon as the probe/reflector
is stable for a given period of time. Two items
become available when activating this option:
Delay (ms): A text box that specifies the time
in milliseconds (ms) that the probe/reflector
must remain stable in order to trigger the
measuring of a point.
Position tolerance: A text box that specifies
a distance within which the probe/reflector
must remain (i.e., stability criterion) for the
specified delay in order for a point to be
measured.

It is possible to change the measurement mode on

the Probing Device toolbar at any time.

451
 APPENDIX

Compensation method

1. In the Tree View of the IMInspect Options dialog

box, expand the Probing Device branch and
select Compensation Method.

2. Select the compensation method to be used to

compensate for the probe/reflector radius
when acquiring data points.
Depending on the selected probing device,
some methods may not be available. Usually,
three compensation methods are offered:
Probe Orientation: The compensation will
be determined by the orientation of the
probe when the first point is acquired.
Compensation Point: The compensation is
determined by the last point acquired above
and away from the surface being probed.
Approach Direction: The compensation will
be determined by an approach direction
based on the real-time positions obtained
prior to acquiring a first point.
3. Click Apply.

452
 APPENDIX

Notes

The Compensation point method offers the

Automatic trigger option which enables automat-
ically capturing a compensation point using a
distance as trigger. Activating this option makes the
Distance parameter available, which specifies the
3D distance from the last acquired point within
which the probe/reflector must be displaced
before automatically capturing a compensation
point.
This option can only be applied when it is known
that the next point that will be acquired is the
compensation point, which is the case when:
Probing features with a fixed number of points.
Probing plane features using the 1 Point
submethod and the Compensation Point
method.
Probing point features using the
Compensation Point method.
Probing surface point clouds using the
Compensation Point method.

Results

Once the probing session starts, all the display options are set as defined in the IMInspect
Options and remain unchanged unless subsequent modifications are made.

453
 APPENDIX

Probing display options

The Display > Probing page of the IMInspect Options contains the configurable parameters
that affect the display in the 3D scene while probing.

Objective: Set the options that affect the display in the 3D scene while probing.

Required: An open IMInspect Probing project.

Steps

1. Choose Tools > Options.

The IMInspect Options dialog box opens.

2. In the Tree View of the IMInspect Options dialog

box, expand the Display branch and select
Probing.
Several options that affect the display in the 3D
scene while probing are available for
customization.

For example, the Guiding line option is offered

by default. It enables the display of a line
between the probe and the object to be
probed, so that the object is easier to locate in
the 3D scene. This option can be disabled at
any time.

Display options are also available for the Digital

Readout (typically referred to as DRO).
3. In the Tree View of the IMInspect Options dialog
box, under the Display branch, expand the
Probing subbranch and select Digital
Readout.

454
 APPENDIX

The Digital Readout is shown by default as

soon as the connection with the probing device
is established. It can display current real-time
probing information such as probe position,
distance from an object, and statistics related to
a probed point or object.
4. Specify the required options.

The Probing Device toolbar also offers a button

that shows/hides the DRO.

5. Click Apply, if changes were made.

Results

Once the probing session starts, all the display options are set as defined in the IMInspect
Options, and remain unchanged unless subsequent modifications are made.

455
 APPENDIX

Special reflectors for laser trackers

Some laser trackers support special reflectors that either facilitate the measurement process
or help measure objects that are not possible to measure with standard reflectors. Special
reflectors are reflector holders that come in various formats and that allow the precise
probing of part features such as holes, pins, and edges.

Objective: Create a new special reflector.

Required: An open IMInspect Probing project. A laser tracker probing device plug-in must be
selected in the Workspace Manager.

Steps

1. Choose Tools > Options.

The IMInspect Options dialog box opens.

2. In the Tree View of the IMInspect Options dialog

box, select Probing Device.

3. From the Device name list, choose the laser

tracker probing device.
4. In the Reflector section, click Reflectors.
The Reflectors dialog box opens.

5. Click New.
The Add Reflector dialog box opens.

456
 APPENDIX

6. Fill out the text boxes with the required

information.
See the Notes below for more information
regarding offset and compensation for special
reflectors.
7. Click OK.

Results

The newly created special reflector is now

available.

Notes

The following diagrams present normal and tangent compensation offsets and compensation
points for certain types of special reflectors.

Reflector + reflector holder with shank

Normal compensation

Tangent compensation (shank radius) How to take compensation point

457
 APPENDIX

Reflector + Reflector holder

Normal compensation

How to take compensation point

Reflector + Edge reflector holder

Normal compensation

How to take compensation point

458
KEYBOARD SHORTCUTS APPENDIX

PolyWorks keyboard shortcuts

General interfaces

Select objects mode CTRL+SHIFT+SPACEBAR

Switch to local split view CTRL+SPACEBAR
mode
Quit interactive modes ESC
Cancel macro script ESC
Next step in wizard TAB
PolyZoom (E, I) Z or Y

File >
Open project CTRL+O
Save project CTRL+S

Edit >
Undo CTRL+Z
Redo CTRL+Y
Undo Transformation CTRL+SHIFT+Z
Duplicate objects (E, I) CTRL+U
Ignore objects CTRL+SHIFT+E
Use objects CTRL+SHIFT+U
Delete >
Objects SHIFT+DEL
Elements DEL

Select >
Elements > Objects >
All CTRL+A All CTRL+SHIFT+A
Invert CTRL+I Invert CTRL+SHIFT+I
None CTRL+N None CTRL+SHIFT+N
Interactively SPACEBAR

459
KEYBOARD SHORTCUTS APPENDIX

View >
Normal View (E,I) SHIFT+F9 Hide >
Center> Objects CTRL+SHIFT+D
All Objects CTRL+C Elements CTRL+D
Objects CTRL+SHIFT+C Restore >
Standard Views > Objects CTRL+SHIFT+R
+X SHIFT+F1 Elements CTRL+R
-X SHIFT+F2 Keep>
+Y SHIFT+F3 Objects CTRL+SHIFT+K
-Y SHIFT+F4 Elements CTRL+K
+Z SHIFT+F5
-Z SHIFT+F6
Rotate 90 around Views SHIFT+right-
click

Object Display Options

Static display > Dynamic display >

Flat CTRL+F Flat CTRL+SHIFT+F
Flat + Wireframe CTRL+L Flat + Wireframe CTRL+SHIFT+L
(E, I) (E,I)
Point CTRL+P Point CTRL+SHIFT+P
Smooth CTRL+G Smooth CTRL+SHIFT+G
Wireframe CTRL+W Wireframe CTRL+SHIFT+W
Bounding box CTRL+SHIFT+B

460
KEYBOARD SHORTCUTS APPENDIX

Specific interfaces

IMInspect Probing
Pop-up menu on objects and annotations Right-click
Drag annotations ALT + left-click

Select > Data Points > Measured Data Points CTRL+M

Select > Data Points > Measured Data Points CTRL+B

of Local Planes

Tools > Reference Objects > Correct Inverted CTRL+Q

CAD Surfaces

461
Getting help
Users can access help resources both within the PolyWorks software interface and externally.
Resources include Reference Guides, illustrated tips, video tutorials, and webinars.

Getting help through the software interface

Reference Guides
PDF documents located on the Help menu of the Workspace Manager and of
each module. The reference guides define all of the functionalities of
PolyWorks.

Question mark
? Found on the title bar of displayed dialog boxes. Clicking the question mark
icon opens the appropriate reference guide at the section documenting the
active dialog box.

F1
F1 Pressing F1 opens either the appropriate reference guide at the section
documenting the active dialog box, or, if in an interactive mode, opens the
Interactive Mode Wizard.

Interactive mode wizard

Enable the wizard in the Tools > Options
window, on the General page. The wizard
gives detailed information on interactive
modes (the modes where clicking in the
3D scene is required).

How to button
A button, found in some dialog boxes, that
displays a diagram showing the required
mouse clicks or the steps to perform for an
operation.

Intermediate Release Notes

A PolyWorks intermediate release is produced approximately once a month.
These releases contain new tools along with bug fixes. The Release Notes file
gives the details of the intermediate release and is available through Help >
Whats New > Intermediate Release Notes.

462
Getting help outside of the software interface

The website
The InnovMetric website (www.innovmetric.com) offers technical webinars (Support >
Webinars page), which introduce new major functionalities and demonstrate the use and
benefits of existing PolyWorks tools.

The Technical Support Zone (TSZ)

The secure Technical Support Zone offers PolyWorks users 24/7 online access to:

Software Releases:

This is where you will find the downloadable versions of PolyWorks and intermediate
release notes.
Knowledge Base:

This section provides videos and tutorials to help you get the most out of PolyWorks:
The Video Learning Center offers workflow-oriented videos to help you learn the
basic capabilities of PolyWorks.
The Tutorials section contains tips & tricks.

Macro Zone:

PolyWorks offers the possibility of creating macro scripts to automate repetitive tasks or
generate a personal set of tools to save time and perform tasks in a predefined, controlled
manner. In the Macro Zone, you will find a variety of useful macro scripts developed by our
Technical Support team.
Data Exchange:

This section is dedicated to your troubleshooting purposes and allows you and a
PolyWorks expert to confidentially exchange data for review.

For direct assistance

Contact the Technical Support team of your PolyWorks provider.

463