CE 523 Theory and Behavior of Steel Structures

Fall 2011

Instructor: Dr. J. M. Nau, Professor and Associate Department Head

203B Mann Hall email: [email protected] office phone: 515-7737

Office Hours: MTWH 10-11:30. There may be occasions, however, when I cannot keep these
office hours. You are welcome to drop by any time my office door is open. You
can check with Toni on my whereabouts if I am not in. Please use the message
board for the course. I monitor email throughout the day and evening.

Prerequisite: CE 426, or equivalent first course in steel design. This prerequisite will be
strictly enforced. CE 523 is not an introductory course, so you must revise your
schedule if you have not had a first course in steel design.

The textbook that we use in our undergraduate course in steel design is:

Structural Steel Design, Fourth Edition, by Jack C. McCormac, Pearson Pren-

tice Hall, 2008. This fourth edition refers to the thirteenth edition of the steel
construction manual. The fifth edition, coauthored by Jack C. McCormac and
Stephen F. Csernak, has just become available. This fifth edition refers to the
fourteenth edition of the steel construction manual.

Required Text: Steel Structures Design and Behavior, Fifth Edition, by Charles G. Salmon,
John E. Johnson, and Faris A. Malhas, Pearson Prentice Hall, 2009.

Required Steel Construction Manual, American Institute of Steel Construction (AISC),

Manual: Chicago, Thirteenth Edition, 2005, or the Fourteenth Edition, 2011.

In the event that you need a copy of the steel manual, AISC offers an attractive
student discount. To pay for your manual, go to www.aiscstudentmanuals.org
and enter the coupon code YHUT2A. This coupon code will be active until
October 3, 2011. Only the fourteenth edition is available from AISC.

Additional Design of Steel Structures, Third Edition, by Edwin H. Gaylord, Charles N.

References: Gaylord, and James E. Stallmeyer, McGraw-Hill, 1992. (out of print)

Torsional Analysis of Steel Members, AISC, 1983. (out of print)

Website: Course materials including the video lectures, class notes, schedule, homework
assignments, and other items are available online:

http://engineeringonline.ncsu.edu/onlinecourses/coursehomepages/FALL2011/
CE523.html
Classwork: Please bring the textbook and calculator to each class. We will solve a number
of analysis and design problems in class. I will refer to the textbook often,
since much of the theory is developed in the textbook and will not be repeated
in class. In general, it will not be necessary to bring the steel manual to every
class.

Regular class attendance and participation is expected. Please turn cell phones,
pagers, and other electronic devices off. Sit in the same seat each class so I can
learn who you are.

Objectives: By the end of the course, you will be able to analyze and design:

1. bolted and welded connections subjected to eccentric shear and to com-

bined bending (tension) and shear,
2. framed beam connections (simple shear connections),
3. continuous beam-to-column connections (moment connections),
4. beams subjected to combined bending and torsion,
5. compression members considering flexural, torsional, and flexural-tor-
sional buckling,
6. laterally unsupported beams subject to lateral-torsional buckling, and
7. members subjected to combined bending and axial compression (beam-
columns).

In most (but not all) design problems, emphasis will be placed on Load and
Resistance Factor Design.

Course Outline:

Topic Textbook reference

Review of bolted and fillet welded connections subjected Problems 4.9, 5.12(a)
to simple shear
Bolted connections subjected to eccentric shear; shear Art. 4.12-4.15
and tension from eccentric loading
Fillet welds subjected to eccentric shear; loads applied Art. 5.17-5.19
eccentric to the plane of the welds
Framed beam connections (simple shear connections) Art. 13.1-13.2
Continuous beam-to-column connections (moment con- Art. 13.6
nections)
Analysis and design of beams subjected to bending and Art. 8.1-8.9,
torsion AISC Torsional Analysis
 Topic Textbook reference

Flexural, torsional, and flexural-torsional buckling of Art. 8.12,

compression members G, G & S Art. 4.19-4.22
Lateral torsional buckling of beams Art. 9.1-9.10
Combined bending and axial load (compression) Most of Chapter 12

Grading: Homework assignments (about 1 per week): 35%

Note that a homework assignment will be due the last week of class.
2 tests (Thurs. Sept. 29 and Thurs. Nov. 17) 30%
Final Exam (Thursday December 15, 1-4 pm): 35%

Grading Scale: 97-100 A+ 93-96.9 A 90-92.9 A-

87-89.9 B+ 83-86.9 B 80-82.9 B-
77-79.9 C+ 73-76.9 C 70-72.9 C-
67-69.9 D+ 63-66.9 D 60-62.9 D-
<60 F

The two tests and comprehensive final exam are open book, open notes, and
open steel manual. Make-up tests will be not be given for any reason. If one test
is missed, the final exam counts 50%; if both tests are missed, the final exam
counts 65%.

Homework Policies:

1. With a few exceptions, homework will be assigned on Thursday and is due the Monday of the
second following week. This provides two weekends to complete each assignment.

2. Working on homework in teams is optional. Some assignments may be completed individu-

ally, and some may be completed in teams. Any number of students may work together as the
assignment is completed; however, teams of no more than two (2) members may submit a
single group solution. One team member is the recorder and the other is the checker.
Each page must have title block at the upper right with the following information:

Page ___ of ___

Recorder initials:______
Checker initials: ______

Note that recording and checking duties must be shared approximately equally throughout the
semester. If one team member is the recorder for an entire assignment, the other team member
must be the recorder for the next assignment.

3. Each assignment must have a cover page with the following information: Course number and
title, homework assignment number, and the typed names of team members. In addition, sig-
 natures of the team members must be under the following two statements:

(a) We, the undersigned, agree that we have each contributed equally to this assignment.
(Of course, this statement will not appear on an assignment completed individually.)

(b) We (or I if submitted individually), the undersigned, have neither given nor received
unauthorized assistance on this assignment.

4. Homework solutions will not be provided, but questions you have will be answered.

Homework Standards:

1. Use high quality paper, preferably scaled engineering paper. Paper with ragged edges, i.e.,
torn from a notebook, will not be accepted.

2. Provide a brief problem statement and appropriate sketches. Copying the entire problem state-
ment from the text or handout is not required. All sketches, free body diagrams, etc. must
be drawn neatly and clearly using a straight edge.

3. Show all work in a neat and orderly fashion. All final and intermediate numerical results
must be accompanied by the proper units.

4. Clearly identify the final results by enclosing answers within boxes or by double underlining.
Some problems may require one or more sketches or plots.

Attendance Policy:

On-campus students will be allowed access to the online lectures. However, regular class atten-
dance is expected. Students are responsible for all material presented in class. See http://
www.ncsu.edu/policies/academic_affairs/courses_undergrad/REG02.20.3.php.

Academic Integrity:

Students will adhere to the academic policy set forth by the University Code of Student Conduct
(http://www.ncsu.edu/policies/student_services/student_discipline/POL11.35.1.php).
Plagiarism and cheating are attacks on the very foundation of academic life, and cannot be toler-
ated within universities. Section eight (8) of the Code defines academic dishonesty and provides
information on potential sanctions for violators of academic integrity. You will be asked to sign
the following statement on each test and the final exam: I have neither given nor received any
unauthorized assistance on this test.

Students with Disabilities:

Reasonable accommodations will be made for students with verifiable disabilities. In order to take
advantage of available accommodations, students must register with Disability Services for Stu-
dents at 1900 Student Health Center, Campus Box 7509, 515-7653. (http://www.ncsu.edu/dso/)
For ore information on NC States policy on working with students with disabilities,
please see http://www.ncsu.edu/policies/academic_affairs/courses_undergrad/REG02.20.1.php.
After registering with the DSS office, you must contact me to discuss the accommodations you
require. This discussion must take place as soon as practicable, well in advance of the time at
which the accommodations are required.

Course Evaluation:

Online class evaluations will be available for students to complete, usually during the last two
weeks of the semester. Students will receive an email message directing them to a website where
they can login using their unity ID and complete evaluations. All evaluations are confidential;
instructors will not know how any student responded to any question, and students will not know
the ratings for any particular instructor.
 CE 523 Theory and Behavior of Steel Structures
Fall 2011 Section 601

Addendum to Syllabus for Online Students Only

This addendum applies only to those students registered for the online section 601. The following
procedures DO NOT apply to those registered for the on-campus section 001.

Homework

Please send all homework to the NC State Engineering Online Homework Coordinator. Home-
work is accepted as a scanned .pdf file or by fax. Please use the cover page found here:

http://engineeringonline.ncsu.edu/online_courses/forms.html

Please make sure that your writing is bold so that the fax or printed scan is clear and legible.
It is essential that you email or fax your homework no later than 4 pm on the due date to
ensure that it has been received in good order. Homework assignments will be delivered to me
and will be returned to you after they have been graded. The Homework Coordinators contact
information is as follows:

Homework Coordinator: Staci Wallace, [email protected]

Toll-Free Phone: (877) 254-0058
Local Phone: (919) 513-4481
Homework submission fax: (919) 515-8415
Homework submission email: [email protected]

Tests and Final Exam

The two 75-minute tests and the 3-hour final exam must be proctored. Engineering Online stu-
dents must submit the name of an individual to serve as a proctor to the EOL office within the first
two weeks of the semester. The Proctor Identification Form may be found here:

http://engineeringonline.ncsu.edu/online_courses/forms.html

Complete the form and submit it. You will be notified of the approval or disapproval status of the
individual to serve as your proctor.

Proctors will receive and administer the tests and final exam according to the schedule in the syl-
labus. Proctors will receive detailed instructions along with the tests and final exam.