Nokia UTRAN Parameters

FMCS Changes: FMCS 1, 2 and 3 have been deleted as they are no longer in use.
Also, for FMCS 8, 21 and 31 only, the following parameter changes have been implemented, resulting from the 2nd Carrier Optimisation Trial:
HHoRscpCancel now -107dBm (was -97 dBm), HHoRscpThreshold now -110dBm (was -100 dBm) and HHoRscpCancelTime now 640 ms (was 1280 ms
for FMCS 8).
WCEL Parameter Changes: PtxSCCPCH2 changed to a default of -3 dB (from -5 dB) and NbrOfSCCPCHs changed to 2 (from 1) following investigation
by J. Button Sept 2009
Following Trials, Optimisation and E2E re-design work the following parameter changes have been made:
For FMCSs 5, 8, 20 and 21
Addition time from 100ms to 200ms. AdditionTime = 200 ms (Internal =9)

Addition Window from 4 to 2 AdditionWindow = 2 (internal = 4)
Drop Window from 6 to 4. DropWindow = 4 (internal = 8)
RNC parameter for setting SRB bit rate to 13.6 kb/s:
StandAloneDCCHBitRate = 13.6 (136 internal)
Also, for HSDPA7.2, there are now 7.2 Light, 7.2 Medium and 7.2 Heavy configurations. The following details the different WCEL configurations
for each.
Used Documentation:
DN00211177 Issue 11G, 2011-12-16, WCDMA RAN RU30 Operating Documentation Issue 05
How to read the table:
Abbreviated Parameter Name The parameter name used in radio network plan files (XML)
Full Name GUI parameter name
Managed Object The object for which the parameter is defined
Group The functional group to which the parameter belongs to
Description Describes the purpose of the parameter and includes extra information on
Range and Step The user interface range and step size for the parameter
Default Value Nokia specified default value: from appropriate Nokia Parameter Dictionary
Nokia Value Nokia recommended value: from RNCSWTN032 (Better performance with
O2 UK Value O2 UK specified value
O2 UK Range for RF Tuning Range for parameters for Radio Planning & Optimisation - RF Tuning
Comments General comments on the parameter setting
Parameters are grouped into four O2 internal
Classification categories:
tion Issue 05
ork plan files (XML)
eter belongs to
and includes extra information on the parameter
r the parameter
priate Nokia Parameter Dictionary
WTN032 (Better performance with recommended parameter modifications - SW Technical Note No. 32 Version 1.0)
& Optimisation - RF Tuning
Network Wide Parameters: Ownership: Radio Engineering

Identifiers: Ownership: Radio Engineering and Radio Planning
Radio Planning & Optimisation - RF Tuning: Ownership: Radio Planning
Radio Planning & Optimisation - Configuration: Ownership: Radio Planning
Parameters required for network configuration, network design, performance optimisation, trial activities
Parameters required for network configuration. Value is fixed and set by rules
Node B / Cell level parameters required for RF tuning. The value can be changed
Node B / Cell level parameters required for Node B / Cell configuration. The value is fixed
ork design, performance optimisation, trial activities
e is fixed and set by rules
g. The value can be changed
Cell configuration. The value is fixed
Parameter Change Request Form
For ALL parameter change requests, complete ALL PARTS of this form and email to pinaki.roychowdhury@
Approved changes will be implemented and communicated to all interested parties
However, rollout of the new parameters and liaison with the IPD Team for tool updates are not part of this p
[email protected]
s are not part of this process - they remain your responsibility

ADJD Parameters
Abbreviated Name Full Name
Handover Control Parameters

AdjdCI Cell Identifier
AdjdCPICHTxPwr Primary CPICH power
AdjdDERR Disable Effect on Reporting Range
AdjdHSDPAHopsId HSDPA HOPS identifier
AdjdLAC Location Area Code
AdjdMCC Mobile Country Code
AdjdMNC Mobile Network Code
AdjdMNCLength Mobile Network Code Length
AdjdNRTHopsId NRT HOPS Identifier
AdjdRAC Routing Area Code
AdjdRNCId RNC Identifier
AdjdRTHopsId RT HOPS Identifier
AdjdRTWithHSDPAHopsId HSDPA HOPS identifier for AMR multi-service
AdjdScrCode Primary Scrambling Code
AdjdSRBHopsId SRB HOPS Identifier
AdjdTxDiv Tx Diversity Indicator
Identification Parameters
ADJDId Identifier of additional intra-frequency adjacency
O&M Parameters
ADJDChangeOrigin Change origin
Managed Object Group Description
ADJD HC An additional intra-frequency neighbour cell is identified with

the
TheUTRAN
parameter Cellindicates
Identifier,the which is composed
transmission power of the
levelGlobal
of the
ADJD HC
RNC
Primary Identifier
CPICH and the
(Common Cell Identifier.
Pilot Channel) of the additional
ADJD HC The parameter indicates whether the additional intra-
intra-frequency
frequency neighbour
neighbour iscell.
cell the forbidden to set
affect the reporting
ADJD HC The parameter identifies parameter (HOPS object)
range
which (addition/drop
controls the window)
intra-frequency calculation,
handover if it tobelongs
the to the
additional
ADJD HC The
activePLMN
set. Identifier and the Location Area Code (LAC)
neighbour
determine cell Location
the when a user Areahas (LAI)HS-DSCH
to which allocated.
ADJD HC An additional intra-frequency neighbour cellthe additionalwith
is identified
intra-frequency
the UTRAN Cell neighbour cell
Identifier, which belongs to.
is composed
ADJD HC An additional intra-frequency neighbour cell is of the Global
identified with
RNC
the Identifier
UTRAN and
Celldefinesthe Cell
Identifier, Identifier. Furthermore,
which2isorcomposed thethe
of used Global
Global
ADJD HC The
RNC parameter
Identifier is composed whetherof the PLMN 3 digits are
Identifier, the in
which the
RNC
mobile Identifier
network andcode the(MNC)
Cell Identifier.
of the Furthermore,
additional Global
intra-frequency
ADJD HC consists
The
RNC of the is
parameter
Identifier Mobile
defines
composedCountry Code
the parameter
of the PLMN(MCC), the Mobile
set Identifier,
(HOPS object)
which
neighbour
Network
which Codecell. the
controls (MNC), and the
intra-frequency RNC Identifier.
handover of a non-real
ADJD HC consists
The of theArea
Location Mobile (LAI)Country
and the Code
Routing(MCC),
Areathe Mobile
Code (RAC)
time
Network(NRT)
determine Code radio
the bearerArea
(MNC),
Routing to the
and the
to additional
RNC Identifier.
which the neighbour intra-
additional cell.
ADJD HC An additional intra-frequency neighbor cell is identified with
frequency
the neighbour cell belongs isto.
ADJD HC TheUTRAN
parameter Celldefines
Identifier,thewhich
parameter composed
set (HOPS of the Global
object)
RNC
which Identifier
controls theand the Cell Identifier.
intra-frequency The
handover Global RNC
of a real time
ADJD HC The parameter
Identifier isbearer identifies
composed the parameter
ofadditional
PLMNneighbour set (HOPS
Identifier and object),
the RNC
(RT)
which radio
controlsscramblingto the
the intra-frequency handover cell.
ADJD HC Identifier.
The downlink code of the PrimarytoCPICH the additional
neighbor
For
(Common cell
RAN 2054 when
Pilot feature a user
Channel) has
"Extension
of the HS-DSCH
of RNCallocated
additional ids" only, extended
intra-frequency
ADJD HC This
range parameter
simultaneously
of 4096..65534 identifies
with the the
AMR parameter
speech CS set
RAB (HOPS or whenobject),
the
neighbour
which cell. the intra-frequency handover toolder
controls
will be used , otherwise
the
range
additional
ADJD HC user
1..4095
The haswill
push
parameter be to
usedtalkas
indicates allocated
this onthe
extended
whether HS-DSCH.
range violates
Primary CPICH3GPP of the
neighbor cell
specifications.
additional when a user neighbour
intra-frequency has a standalone SRB allocated
cell isintra-frequency
broadcast from
Primary
on DCH Scrambling
or on HSPA. Code of an additional
two antennas.
neighbour If the be
cell must Primary
unique CPICH
withinisthe broadcast
basic and from two
additional
ADJD Identification Identification
antennas,
intra-frequency theofUE ADJD (Additional
measures
neighbour Intra-frequency
the received
cells. code power Adjacency)
from
If the antenna
within
each value
a WCDMA of this parameter
cell.
separately and issums"Notthedefined"
measurementor the value of
results
the WCEL parameter FastHSPAMobilityEnabled
together in order to get the total received code power on the is
ADJD O&M "Disabled",
The parameter
Primary the ADJD
CPICH. definesparameter
the originAdjdRTHopsId
of the last configurationidentifies the
HOPS affecting
action parameter theset when the standalone SRB is allocated
object.
on DCH, and the ADJD parameter AdjdHSDPAHopsId
identifies the HOPS parameter set when the standalone SRB
is allocated on HSPA.
Range and Step Default Value Nokia Value
1...65535, step 1 Not applicable Not applicable

-10...50 dBm, step 0.1 dBm Not applicable Not applicable
No (0), Yes (1) 0 0
1...100, step 1, Not defined (0) 0 0
2 (2 digits), 3 (3 digits) 2 (2 digits) 2 (2 digits)
1...100, step 1, Not defined (0) 0 0
Tx Diversity not used (0), Tx 0 (Tx Diversity not used) 0 (Tx Diversity not used)
Diversity in use (1)
Not defined (0), Network Not applicable Not applicable

originated configuration action
(1), NetAct RNW plan
(2), Element Manager
(3), Configuration action by
automatic tuning function (4),
Element Manager originated
mass config action (5), NetAct
originated direct RNW change
(6)
O2 UK Value O2 UK Range for Optimisation Comments
Not applicable
33
0
Not applicable
Not applicable
234
10
2 (2 digits)
Not applicable
Not applicable
Not applicable
Not applicable
Not applicable
Not applicable
Not applicable
0 (Tx Diversity not used)
Not applicable
Not applicable
Classification IPD PTY ID Discrepancy - Criticality
12201
12202
12203
12204
12205
12206
12207
12208
12209
12210
12211
12212
12213
12214
12235
Discrepancy Checking
New in RU20 New in RU20 on TOP
Frequency
No Auto Disc Check Required


New in RU30 New in RU40 New in RU50 EP1
New in RU40
Issue in Which Parameter
Added or Last Changed
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
9.0
4.5
9.0
4.5
9.0
4.5
4.5
4.5
ADJG Parameters
Abbreviated Name
Full Name

AdjgBandIndicator Band Indicator
AdjgBCC Base Station Colour Code
AdjgBCCH BCCH ARFCN
AdjgCI Cell Identifier
AdjgLAC Location Area Code
AdjgMCC Mobile Country Code
AdjgMNC Mobile Network Code
AdjgMNCLength Mobile Network Code Length
AdjgNCC Network Colour Code
AdjgSIB Include in System Information
AdjgTxPwrMaxRACH Maximum UE TX Power on RACH
AdjgTxPwrMaxTCH Maximum UE TX Power on TCH
ADJGType Inter-system Neighbour Cell Type
NrtHopgIdentifier NRT HOPG Identifier
RtHopgIdentifier RT HOPG Identifier
ADJGId Inter-system adjacency identifier
O&M Parameters
ADJGChangeOrigin Change origin
Managed Object Group Description
ADJG HC This parameter indicates whether the BCCH ARFCN of the

neighbour
Base Station cellIdentity
belongs Code to the GSM is1900
(BSIC) band. The
composed parameter
of Network Colour
ADJG HC
value
Code is set
(NCC) byandthe system
Base for
Station the GAN
Colour neighbour
Code (BCC). cell.
The
ADJG HC This parameter contains the absolute RF channel number of the
parameter
Broadcast value is Channel
Control set by the systemoffor
(BCCH) thethe GSMGANneighbour
neighbourcell. cell.
ADJG HC GSM and GAN neighbour cells are identified with the Cell Global
The parameter
Identifier (CGI), value
whichand isisset by the system
composed of the for
PLMN the Identifier,
GAN neighbour
ADJG HC The
cell. PLMN Identifier Location Area Code (LAC) determine the
Location
Location Area Code and Cell the Identifier.
ADJG HC GSM andArea GAN(LAI) to
neighbour which cells are GSM or GANwith
identified neighbour
the Cellcell Global
belongs
Identifier to. The
(CGI), PLMN
which identifier
is composed is composed
of the PLMN of the Mobile
Identifier,
ADJG HC GSM
Country andCodeGAN(MCC) neighbour andCell cellsMobile
the are identified
Network with the Cell Global
Code(MNC).
Location
Identifier Area
(CGI), Code
which and is composed Identifier. of Furthermore,
the PLMN the PLMN
Identifier,
ADJG HC This parameter
Identifier is composeddefinesofwhether the Mobile2 orCountry
3 digits are Code used(MCC) in Mobile
and the
Location
Network Area Code and Cell Identifier. Furthermore, the PLMN
Code.
ADJG HC Mobile
Base Network
Station Code
Identity (MNC).
Code (BSIC)
Identifier is composed of the Mobile Country Code (MCC) and is composed of Network Colour
the
Code
Mobile
The (NCC)
Network
parameter and Base
Code
indicates Station
(MNC).whether Colour
the Code
GSM (BCC).
neighbor The
cell is
ADJG HC When this parameter
parameter
included value is setisby modified
the system also forthethe valueGAN of neighbour
MNC usedcell. by
ADJG HC system isinalways
This parameter the System changed.
indicates Information
the maximum Block 11&11bis&12&18
transmission power for the
level
cell
that selection
aparameter
UE can use and re-selection
when accessing procedures.
the GSM The parameter
neighbour also
cell on the
ADJG HC This
indicates whether indicates
thethe GSM theneighbor
maximum celltransmission
iscell
monitored power
for thelevel
RACH.
that a The
UE may UE uses
use on ainTCH parameterin the in
GSM the neighbour re-selection
cell. The cellRNC
ADJG HC inter-system
The parameter
procedure. If handover
theindicates
maximum theoutput
whether CELL_DCHthe
power state
inter-system
of the of
UE the connected
neighbour
is lower than
uses
mode.
is the
a value The
GSMthe parameter
GSM
cell in
neighbor
or parameter,
a GANset thecell.decision
cell is algorithm
included in of
the the
systeminter-RAT
ADJG HC the
Defines
(GSM) of the
parameter
handover. If the maximum the UEoutput
(HOPG adds the
object) power power
which difference
ofcontrols
the UEand the (dB
inter-
is lower
information
value) to the when
minimum the value
required of the GSM parameter
RSSI is "For
level, whichSIB the CELL
RAT
than
DCH
Defineshandover
the
meas" value
the of
orresult
"For
parameter a non-real
the SIBparameter,
only". timeThe (NRT)
the GSMRNC radio
adds
neighbor bearer
the toisthe
power
cell GSM
included
ADJG HC measurement
neighbour
difference cell.
(dB The
value) oftoset
the
parameterthe
(HOPG
GSM value
minimum
object)
neighbour
is set
required
which
cellthe
by GSM
controls
mustsystemexceed
RSSI
the
for
inter-
the
level,
in
RATthe
before extended
handover
themeasurementof system
a
cell re-selectionreal information
time (RT)
is possible. when
radio the
bearer
Theneighbourvalue
to the
parametercell of the
GSM
value is set
GAN
which neighbour
parameter
neighbour the is "For
cell. cell.
The SIBbis
parameter result
and of theDCH
CELL
value GSM
is setmeas"
by theorsystem "For SIBbis must
for the
by the
exceed system
before for the GAN neighbour cell.
ADJG Identification Identification
only". The
GAN neighbour valueofthe of handover
inter-system
cell. the parameter is possible.
adjacencyis set (GSM The
by theparameter
or GAN) for
system value
the ais
within
set
WCDMA
GAN byneighbor
thecell.
system Ifcell. for the Priority
Wireless GAN neighbour Service iscell. enabled, then operator
shall specify a unique GSM cell as the target cell of blind
ADJG O&M The
The parameter
handover. Whendefines
GSM neighbor cell the
Wireless origin of
Priority
is monitored the
for last
Service configuration
thefeature is enabled,
inter-system action
handoverthen
affecting
value 0 isthe
regardless object.
aofspecial
the value value of which indicatesAdjgSIB
the parameter that cellifisthe target
value cell
ofof
blind
the RNFChandover.parameter This means that Inter-system adjacency
FemtoHandoverControl is "Disabled". identifier
If the
0 shallofbethe
value defined
RNFCby operator FemtoHandoverControl
parameter if Wireless Priority Service is feature
is enabled.
"Enabled":
- the GSM neighbor cell is monitored for the inter-system

handover if the value of the parameter AdjgSIB is set to "For
CELL DCH meas only", "For SIB and CELL DCH meas" or "For
SIBbis and CELL DCH meas".
- the GSM neighbor cell is not monitored for the inter-system

handover if the value of the parameter AdjgSIB is set to "For SIB
only" or "For SIBbis only".
If the Wireless Priority Service feature is enabled, then the

parameter Include in System Information shall be set to have
value "For SIB and CELL DCH meas" for ADJG-0.
The total number of intra-frequency, inter-frequency and GSM

neighbor cells, which can be included in the System Information
Block type 11 (SIB11), is 47 when all cell re-selection parameters
are broadcasted. When the HCS is used, the capacity is limited to
35 cells.
The System Information Block type 11bis (SIB11bis) increases the

maximum number of adjacencies to 96. SIB11bis can only be
decoded by the UEs, which support 3GPP R6.
Range and Step Default Value
No (0), GSM 1900 (1) Not applicable

0...7, step 1 Not applicable
For
2 (2 CELL
digits),DCH
3 (3meas
digits)only (0), For SIB 2 (2 digits)
and CELL DCH meas (1), For SIBbis
0...7, step 1
and CELL DCH meas (2), For SIB only Not applicable
(3), For SIBbis only (4) For SIB and CELL DCH meas (1)
0...33 dBm, step 1 dBm 33 dBm
0...43 dBm, step 1 dBm 33 dBm
GSM cell (0), GAN cell (1) GSM cell (0)
1...100, step 1, Not defined (0) Not applicable
1...100, step 1, Not defined (0) Not applicable
0...95, step 1, Zero has special meaning Not applicable

only when WPS is enabled. (0)
Not defined (0), Network originated Not applicable

configuration action (1), NetAct RNW
plan originated configuration action (2),
configuration action (3), Configuration
action by automatic tuning function (4),
Element Manager originated mass
config action (5), NetAct originated
direct RNW change (6)
Nokia Value
MACRO RT & NRT, F1
Not applicable Not applicable

For SIB and CELL DCH meas (1) For SIB and CELL DCH meas (1)
33 dBm 33 dBm
33 dBm 33 dBm
GSM cell (0) GSM cell (0)
Not applicable 1
Not applicable 1

O2 UK Value
MACRO RT & NRT, F2 MACRO RT & NRT, F3

33 dBm 33 dBm
33 dBm 33 dBm
7 10
7 10

ue
MICRO RT & NRT, F1 MICRO RT & NRT, F1

33 dBm 33 dBm
33 dBm 33 dBm
8 9
8 9

O2 UK Range for Optimisation Comments
O2 values depend on whether f1 or f2.

Identifier 10250
Identifier 10246
Identifier 10247
Identifier 10241
Identifier 10242
Identifier 10243
Identifier 10244
Identifier
Identifier 10245
NWP 11246
NWP 11345
12236 Extended Discrepancy
RPO - RF Tuning 10248
RPO - RF Tuning 10249
Identifier 10240
Identifier
Frequency
Every 2 hours
Every 2 hours
Every 2 hours
Every 2 hours
Every 2 hours
Monthly
Monthly
Monthly
Every 2 hours
Weekly
Daily
Daily
Monthly
Every 2 hours
Every 2 hours
Every 2 hours

4.5
9.0
4.5
5.3
5.3
ADJI Parameters
Abbreviated Name

AdjiCI
AdjiComLoadMeasDRNCCellNCHO
AdjiCPICHTxPwr
AdjiEcNoOffsetNCHO
AdjiHandlingBlockedCellSLHO
AdjiLAC
AdjiMCC
AdjiMNC
AdjiMNCLength
AdjiNCHOHSPASupport
AdjiRAC
AdjiRNCid
AdjiScrCode
AdjiSIB
AdjiTxDiv
AdjiTxPwrDPCH
AdjiTxPwrRACH
AdjiUARFCN
BlindHOTargetCell
NrtHopiIdentifier
RtHopiIdentifier
ADJIId
O&M Parameters
ADJIChangeOrigin
ers
Full Name Managed Object Group
Cell Identifier ADJI HC

NCHO activity of common load measurement DRNC cell ADJI HC
Primary CPICH power ADJI HC
CPICH EcNo offset for the non-critical HO procedure ADJI HC
Handling of blocked IF neighbour cell in SLHO procedure ADJI HC
Location Area Code ADJI HC
Mobile Country Code ADJI HC
Mobile Network Code ADJI HC
Mobile Network Code Length ADJI HC
ADJI HSPA Cell for Non Critical Handover ADJI HC
Routing Area Code ADJI HC
RNC Identifier ADJI HC
Primary Scrambling Code ADJI HC
Include in System Information ADJI HC
Tx Diversity Indicator ADJI HC
Maximum UE TX Power on DPCH ADJI HC
Maximum UE TX Power on RACH ADJI HC
UARFCN ADJI HC
Blind HO target cell ADJI HC
NRT HOPI Identifier ADJI HC
RT HOPI Identifier ADJI HC
Inter-frequency adjacency identifier ADJI Identification
Change origin ADJI O&M

Description
An inter-frequency neighbour cell is identified with the UTRAN

Cell
This Identifier,
parameterwhich controls is composed
the activityofofthe Global load
common RNC Identifier
and the
measurement Cell Identifier.
This parameterofindicates certain inter-frequency
the transmission neighbour
power level cell of that theis
controlled
Primary by the
CPICH defines DRNC.
(Common The measurement
Pilot EcNoChannel) is controlled over Iur
The
This
by modification
parameter
using RNSAP is not possible
signalling. CPICH if the offset newoftarget thethe
for inter-frequency
cell is under
non-critical
neighbour
the controlling
inter-frequency cell.RNC. handover Cross-check procedure. between RNC, WCEL and
This
ADJI parameter
objects is defines if an
required. inter-frequency neighbour cell that
The
is measurement
blocked from the isservice-
used toand detect whether handover
load-based non-critical
PLMN
If the Identifier
measured and
frequency Location Area
includes Code
a (LAC) determine isinthe
handovers
procedure
Location
are
blocks
Area
possible.
(LAI) allto If common
inter-frequency
which the neighbouriscells
load cell
inter-frequency
that
measurement blocked
in that
neighbour
the
cell
non-critical
activated,
An
WCDMA inter-frequency handover
the measurement
frequency procedure,
from the is
neighbour event
cell
SLHO the handover
based (event
is procedure.
identified to the selected
A and event
with UTRAN Cell
belongs
target
B), andcell
Identifier to.
the can
which be
followingis done RNC
composed if the blocked
configuration
of Global cell
RNC is not
parameters inside
Identifier the soft
define
and the
Cell
An inter-frequency
handover neighbour
rangeNCHOThrComLoadMeasDRNCCell,
of the target cell is identified with UTRAN Cell
cell.
measurement:
Identifier.
If the parameterFurthermore, has the Global
value RNC
0 and Identifier
the cell isis composed
blocked from of the
Identifier,
The parameter whichdefines is composed whether of Global
2 orwhich RNC are
3neighbour
digits Identifier
used and
in the Cell
NCHOHystComLoadMeasDRNCCell,
RNC
SLHO Identifier
procedure, and PLMN
all Identifier,
inter-frequency and in turn consists
cells in the of
Identifier.
A cell isCountrynotFurthermore,
Network inside Code the Global
soft
(MNC). handover RNC Identifier range if the is composed
measured of
NCHOFilterCoeffComLoadMeasDRNCCell.
Mobile
WCDMA
This parameterfrequency Code
indicatesare (MCC)
removed
whetherand from Mobile
the theNetwork
list
neighbouring Code
of possible (MNC).
cell provides
RNC
EcNo Identifier
of the bestand PLMN
target cell Identifier,
subtracted which with inthe turn consists
value of this of
handover
the
Mobile HSPA targets
support
Country Codeinforthe SLHOand
non-critical
(MCC) procedure.
handovers.
Mobile
Location
parameter
When
Value
The modificationofArea
1this (LAI)
is higher
parameter
the parameter
is notand
than is Routing
meansifArea
measured
modified,
possible also
that
the EcNo thetheNetwork
Code
new value
value(RAC)
measurement
target of
ofCode
determine
the
the
cell MNC(MNC).
isblocked
is
under
the
cell.
used Routing
EcNo
activated. by the NoteArea
offset
system thatto the
of which
is
the target
always
DRNC thecell inter-frequency
cell
changed. is used inactivation
the neighbour
calculation. cell
the
An
If
Thethe controlling
inter-frequency
parameter
modification RNC. has not Cross-check
is neighbor
the value
possible 1may
ifis
and the
reject
between
identified
the
newcell RNC,
with
target WCEL
UTRAN
is blocked
cell
duefrom
is under
toCellthe
and
belongs
capacity
ADJI
Identifier, to.
objectsreasons
which is or
required.
is RNC if
composed it does not
of Globalsupport RNC this measurement.
Identifier and Cell
SLHO
the
Defines procedure,
controlling
the RNC.
downlink measures
Cross-check
scrambling this WCDMA
between
code of the RNC, frequency
Primary WCEL CPICH and in a
"Non-critical
The modification
Identifier.
normal Global
manner. handovers"
A ishandover
RNC not are,toforthe
possible
Identifier ifexample,
is the
composed
selectednew service
target of
target PLMNandis
cell
cell UE
under
Identifier
can be
ADJI
(Common
capability
the objects
controlling Pilot
type is required.
Channel)
handovers.
RNC. Cross-checkof the
Service inter-frequency
and
between load based
RNC, neighbour
handover
WCEL and cell.
"Non-critical
This
and
done parameter
RNC handovers"
if theIdentifier.
blocked indicatescell isare,
whether
not for
insideexample,
the the service
inter-frequency
soft handover and UE
neighbor
range.
make
ADJI
capability
cell use
objects
issoft
included of
type this
is parameter.
required.
handovers.
in the Service and load based handover
The
Indicates, handover
whether theSystem
range for each
Primary Information
CPICH targetofcell Block
the 11&12&18
isinter-frequency
defined withfor the
and
the
For
RNP Multi-Band
cell
RAN selection
parameter2054 Load
and
feature Balancing
re-selection
Extension
AdjiEcNoOffsetNCHO. make procedures.
of RNC use ids of this This parameter.
only, parameter
extended
neighbour
This parameter cell isindicates
broadcast from two antennas. If the power
Primary
also
rangeindicates
CPICH ofis4096..65534
broadcast whether from thethe
will be
two
maximum
inter-frequency
used
antennas, , otherwise transmission
the neighbor
UE older cell is the
range
measures
level
that
1..4095
This a
monitored UE will
parameter may
for use
the
be power
used on
indicates as the
inter-frequencythis DPCH
the extended
maximum in the
handover neighbouring
range in
transmission the cell.
CELL_DCH
violates 3GPP power The
level
received
RNC uses code
the parameter from ineach
the antenna
decision separately,
algorithm ofandthe on sums
inter-
state
the ofUE
specifications.
that a the
measurement can connected
use when
results mode.
accessing
together The inter-frequency
inthe orderneighbouring
to get neighbor
the cell
total cell
the
This
frequency
is parameter
included handover.
inUE the defines
system Ifthe the
the UTRA Absolute
maximum
information output
when Radio
power
the value Frequency
of ofthe the UE is
RACH.
received
Channel The code
Number uses
power of theon parameter
the Primary
inter-frequency in the
CPICH. cell
neighbour re-selection
cell.
lower
parameter
This
procedure. than
parameter the
isIf "For
thevalue SIB
indicates
maximum ofand the parameter,
CELL
outputDCH
whether the
power the
meas"ofRNC
neighbor the adds
orcell
UE"For isSIBthe
defined
lower power
only". as
than
difference
The
a
thetarget
value cell(dB
inter-frequency
of for
the value) to
neighbor
inter-frequency
parameter, the minimum
the cell
blind
UE is adds required
included
handover.the in
power CPICH
the
Only one RSCP
extended
difference target
Defines
This
level, the parameter
parameter
which defines set
the (HOPI
downlink object) channel which controls
number and the the
system
cell
(dB per
value)
inter-frequency
downlink tothe
information
frequency
carrier
measurement
thehandovercanwhen
minimum
frequency.
be the
ofrequired
a
The
result
value
defined. non-real
RNC
of of
CPICH the
the
time
calculates
neighbour
parameter
Ec/No
(NRT) the
iscell
level,
radio
uplink
"For must
which
bearer
exceed
Defines
SIBbis
the before
andthe CELL
measurement the
parameter DCHhandover
result set
meas" is
(HOPI
the or possible.
object)
"For SIBbis which controls
only". the
to the
carrier neighbouring
frequency
inter-frequency and
handover cell. theofuplink neighbouring
channel
ofisapossible.
real time (RT) number cell
radiofrom
must exceed
bearer theto the
before
downlink the cell
carrier re-selection
frequency andcell theisduplex distance used in the
neighbouring
The inter-frequency cell. neighbor monitored for the inter-
RF band. handover
Identification
frequency of ADJIregardless (Inter-Frequency of the value Adjacency) of the withinparameter a WCDM
AdjiSIB if the value of the RNFC parameter
RF band I: Allowed DL channel
FemtoHandoverControl is "Disabled". numbers If thearevalue 10562-10838.
of the RNFC
The parameter defines
parameter FemtoHandoverControl is "Enabled": the origin of the last configuration action
affecting
RF band the object. DL channel numbers are 9662-9938. In the
II: Allowed
US
- theallowed
inter-frequencyDL channel neighbornumbers cellare 9663-9712,
is monitored for9763-9812,
the inter-
and
frequency handover if the value of the parameter AdjiSIBare
9888-9937. Allowed additional DL channel numbers is set
412,
to "For 437, CELL 462,DCH 487,meas 512, only", 537, 562, "For587, SIB 612, and CELL 637, 662, DCHand meas"
687.
or "For SIBbis and CELL DCH meas".
RF
- theband III: Allowed DL
inter-frequency channel
neighbor cellnumbers are 1162-1513.
is not monitored for the inter-
frequency handover if the value of the parameter AdjiSIB is set
RF band
to "For IV:only"
SIB Allowed DL channel
or "For numbers are: 1537-1738.
SIBbis only".
Allowed additional DL channel numbers are 1887, 1912, 1937,
1962, 1987, 2012,
The maximum 2037,
number of 2062, and 2087.neighbor cells that can
inter-frequency
be included in the System Information Block 11&12&18 is 32.
RF
Theband V : Allowed
neighboring cellsDL
canchannel numbers
be distributed toare 4357-4458.
up to two FDD
Allowed additional DL channel
carriers (ref. 3GPP TS 25.133). numbers are 1007, 1012, 1032,
1037, 1062, and 1087.
RF
Theband
total VI: Allowed
number DL channel numbers
of intra-frequency, are 4387 -and
inter-frequency 4413.
GSM
Allowed
neighboradditional
cells, whichDLcan
channel numbers
be included in are
the 1037
Systemand 1062.
Information
RF
Blockband
typeVII:
11Allowed
(SIB11),DL channel
is 47 when numbers are 2237 - 2563.
all cell re-selection
Allowed additional DL channel numbers
parameters are broadcasted. When HCS is used, are 2587, the
2612, 2637,
capacity
2662, 2687, 2712,
is limited to 35 cells. 2737, 2762, 2787, 2812, 2837, 2862, 2887
and 2912.
The System Information Block type 11bis (SIB11bis) increases

Not activated (0), Activated (1) Not activated (0)
-10...50 dBm, step 0.1 dBm Not applicable
0...20 dB, step 0.5 dB 6 dB
All cells in that frequency are blocked (0), Frequency All cells in that frequency are blocked (0)
is measured (1)
2 (2 digits), 3 (3 digits) 2 (2 digits)
No HSPASupport (0), HSPASupport (1) No HSPASupport (0)
0...511,
For CELL step
DCH1 meas only (0), For SIB and CELL Not applicable
DCH meas (1), For SIBbis and CELL DCH meas (2), For SIB and CELL DCH meas (1)
For SIB only (3), For SIBbis only (4)
Tx Diversity not used (0), Tx Diversity in use (1) 0
-50...33 dBm, step 1 dBm 24 dBm
-50...33 dBm, step 1 dBm 24 dBm
disabled (0), enabled (1) disabled (0)
Not defined (0), Network originated configuration Not applicable

action (1), NetAct RNW plan originated configuration
action (2), Element Manager originated configuration
action (3), Configuration action by automatic tuning
function (4), Element Manager originated mass
config action (5), NetAct originated direct RNW
change (6)
Nokia Value
MACRO RT & NRT, F1

Not activated (0) Not activated (0)
6 dB 6 dB
All cells in that frequency are blocked (0) All cells in that frequency are blocked (0)
No HSPASupport (0) No HSPASupport (0)
0 0
24 dBm 24 dBm
24 dBm 24 dBm
disabled (0) disabled (0)
Not applicable SEE EMBEDDED COMMENT
Not applicable SEE EMBEDDED COMMENT

O2 UK V
MACRO RT & NRT, F2 MACRO RT & NRT, F3

6 dB 6 dB
0 0
24 dBm 24 dBm
24 dBm 24 dBm
SEE EMBEDDED COMMENT SEE EMBEDDED COMMENT
SEE EMBEDDED COMMENT SEE EMBEDDED COMMENT

O2 UK Value
MICRO RT & NRT, F1 MICRO RT & NRT, F2

6 dB 6 dB
0 0
24 dBm 24 dBm
24 dBm 24 dBm
9 10
9 10

F1 to Femto F2 RT & NRT F3 to Femto (F2) RT & NRT

6 dB 6 dB
For SIB only (3) For SIB only (3)
0 0
24 dBm 24 dBm
24 dBm 24 dBm
11 12
11 12

Applicable to Load and Service based handover

Please refer to trial report UKRE/12/66

Frequency
Identifier 11455 Every 2 hours

RPO - Configuration 11512 Every 2 hours
Identifier 11540 Monthly
12237 Extended Discrepancy Monthly
NWP 11539 Every 2 hours
RPO - Configuration 11435 Monthly
NWP 11497 Daily
NWP 11522 Daily
Monthly
RPO - RF Tuning 11478 Every 2 hours
RPO - RF Tuning 11535 Every 2 hours
11464 Every 2 hours

New in RU20 New in RU20 on TOP New in RU30
RU20 on TOP
Issue in Which
New in RU40 New in RU50 EP1 Parameter Added or
Last Changed
4.50
9.00
9.00
6.70
5.13
5.13
ADJL Parameters
Abbreviated Name
System Information Parameters

AdjLEARFCN
AdjLMeasBw
AdjLSelectFreq
HopLIdentifier
ADJLId
O&M Parameters
ADJLChangeOrigin
ers
Managed Object Group
Full Name
E-UTRA Absolute Radio Frequency Channel Number ADJL SI
Measurement Bandwidth ADJL HC

Adjacent LTE Selected Frequency ( EARFCN) ADJL HC
HOPL Identifier ADJL HC
Identifier of inter- system adjacency to LTE ADJL Identification
Change origin ADJL O&M

Description
This parameter defines the E-UTRA Absolute Radio Frequency Channel

Number of the neighboring E-UTRA frequency. This parameter defines the
EARFCN of the downlink carrier frequency.
This parameter indicates the measurement bandwidth information common
for
Theallparameter
neighboring E-UTRA
is used cells whether
to define on the carrier
UEs canfrequency. It is defined
be redirected to theby
LTEthe
parameter
frequency Transmission Bandwidth Configuration, NRB [36.104]. The values
Defines
indicate theinparameter
question or
number of set
not.
(HOPLblocks
resource object) which
over controls
which the the inter-RAT
By default, the LTE carrier
handover of idle and connected frequencies that
mode UEs are used
to the inUE
E-UTRAthecould measure.
redirection
neighbor cell
functionality are the same
during cell reselection ones that are broadcasted in the system
procedure.
information
This parameterblockis type 19. If there is
an identification ofaADJL
needwithin
to exclude somecell.
a WCDMA frequencies
from the redirection functionality, then it is done with this parameter. The
exclusion of a given carrier frequency is done by using the value for SIB
only.parameter defines the origin of the last configuration action affecting the
The
object.
6 (6), 15 (15), 25 (25), 50 (50), 75 (75), 100 (100) 50 (50)

For SIB and CELL DCH meas (0), For SIB only (1) For SIB and CELL DCH meas (0)
Not defined (0), Network originated configuration action (1), Not applicable
NetAct RNW plan originated configuration action (2),
Element Manager originated configuration action (3),
Configuration action by automatic tuning function (4),
Element Manager originated mass config action (5), NetAct
originated direct RNW change (6)
Nokia Value O2 UK V
MACRO TOWARDS L800
Not applicable 6400
50 (50) 50 (50)
For SIB and CELL DCH meas (0) 1
Not applicable
1
Not applicable
Not applicable
Not applicable
O2 UK Value
SPECIAL EVENTS SITES ONLY TOWARDS
MACRO TOWARDS L1800
L800
6400 1226
50 (50) 25 (25)
2 3
1 2

Frequency
Monthly
Monthly
Monthly
Monthly

RU20 on TOP
RU20 on TOP
RU20 on TOP
RU20 on TOP
RU20 on TOP
Issue in Which
New in RU40 New in RU50 EP1 Parameter Added or
Last Changed
9.0
New In RU50 EP1 9.0
ADJS Parameters

AdjsCI Cell Identifier
AdjsCPICHTxPwr Primary CPICH power
AdjsDERR Disable Effect on Reporting Range
AdjsEcNoOffset CPICH Ec/No Offset
AdjsLAC Location Area Code
AdjsMCC Mobile Country Code
AdjsMNC Mobile Network Code
AdjsMNCLength Mobile Network Code Length
AdjsRAC Routing Area Code
AdjsRNCid RNC Identifier
AdjsScrCode Primary Scrambling Code
AdjsSIB Include in System Information
AdjsTxDiv Tx Diversity Indicator
AdjsTxPwrRACH Maximum UE TX Power on RACH
HSDPAHopsIdentifier HSDPA HOPS Identifier
NrtHopsIdentifier NRT HOPS Identifier
RtHopsIdentifier RT HOPS Identifier
RTWithHSDPAHopsIdentifier HSDPA HOPS identifier for AMR multi-service
SRBHopsIdentifier SRB HOPS Identifier
ADJSId Intra-frequency adjacency identifier
O&M Parameters
ADJSChangeOrigin Change origin
ADJS HC
ADJS HC
ADJS HC
ADJS HC
ADJS HC
ADJS HC
ADJS HC
ADJS HC
ADJS HC
ADJS HC
ADJS HC
ADJS HC
ADJS HC
ADJS HC
ADJS HC
ADJS HC
ADJS HC
ADJS HC
ADJS HC
ADJS Identification
ADJS O&M
Description
An intra-frequency neighbour cell is identified with the UTRAN

Cell
This Identifier,
parameterwhich indicatesis composed
the transmission of the Global powerRNC levelIdentifier
of the and
the Cell
Primary Identifier.
CPICH indicates (Commonwhether Pilot Channel) of the intra-frequency
This parameter the neighbouring cell is
neighbour
forbidden cell.
to Ec/No
affectisthe
The CPICH
The modification notreporting
Offset possible
determines range
if the an (addition/drop
new target
offset cell is
value, window)
under
which thethe
calculation,
controlling
UE adds to if
RNC.
the it belongs
Cross-check
CPICH to
Ec/No the active
measurement set.
between RNC,result WCEL of and
the ADJS
The
objectsPLMN Identifier and the Location Area Code (LAC) determine
is required.
neighbouring
the Location cell before
Area (LAI) toit which
compares the Ec/No valueneighbour with the
An intra-frequency
reporting criteria. neighbour cellthe intra-frequency
is identified with the UTRAN
cell
Cell belongs
Identifier,to.whichneighbour is composed of identified
the Globalwith RNC
An intra-frequency cell is theIdentifier
UTRAN and
the
Cell Cell Identifier.
Identifier, which Furthermore,
is composed the Global
of the RNC
Global Identifier is
The parameter
composed of the defines
PLMN whether
Identifier, 2 or which3 digits areRNC
consists used
of the
Identifier
the and
inMobile
the
MobileCellNetwork
Identifier. CodeFurthermore,
(MNC). the Global RNC Identifier is
Country
The
composed Code
Location of the (MCC),
Area (LAI)
PLMN the and Mobile
the Routing
Identifier, Network Code
Area
which consists Code(MNC),
of the(RAC) and the
Mobile
RNC
Country Identifier.
determine Codethe Routing
(MCC), Area to which the intra-frequency
An
When intra-frequency
neighbour this parameter
cell belongs isthe
neighbor Mobile
modified
to.
cell is Network
alsoidentified
the MNC Code
with (MNC),
the UTRAN
value used and bythe
Cell
the
RNC
system Identifier.
Identifier, which
is always is composed
changed. of the Global RNC Identifier and the
The modification
downlink is
scrambling not possiblecode ofif the the Primary
new target CPICH cell is under the
(Common
Cell
Pilot Identifier.
controlling
Channel) RNC. The
of Global
Cross-check RNC
the intra-frequency Identifier
between is
RNC,
neighbour composed
WCEL
cell. and of the
ADJSthe
The
PLMN
The modification
parameter
Identifier
modification is
is not
determines
and thepossible
not RNC
possiblewhether ifif the
Identifier.
the thenew
new target
target cell
intra-frequency cell isis under
neighbor
under the
objects
controlling is required.
RNC. Cross-check between RNC, WCEL and ADJS
cell
This isparameter
included
controlling RNC.in the System
Cross-check
indicates whetherInformation
between RNC,
the Primary Block WCEL11&12&18
CPICH and for
ADJS
of the the
intra-
objects
cell
For RAN is
selection required.
2054
objects is required. and re-selection
feature "Extension procedures.
of RNC The
ids" parameter
only, extended also
frequency
This parameter neighbour indicates cell is the broadcast
maximum from two antennas.
transmission power If level
the
determines
range
Primary of CPICH whether
4096..65534 is the
willintra-frequency
broadcast be from
used neighbor
, otherwise
two antennas, older cellrange
the UEis monitored
1..4095
measures
that
for
will
The a
the
be UEused
parameter can
soft(er) as use
handoverwhen
thispower
extended
identifies accessing
in
the CELL_DCH
range
parameter the neighbouring
state
violates of connected
3GPP
set (HOPS cell onmode.
specifications.
object) the
the
RACH. received
The UEcode uses the from
parameter each antenna in the cell separately
re-selection and sums
The
the intra-frequency
controlling
measurement the intra-frequency neighbor
results cell
together is
handovers included
in order of in
aget
tothe the
user thesystem
having
total HS-
This parameter
procedure.
information thedefines
Ifwhen maximum
the on the
value parameter
output
ofPrimary power
the parameter setof (HOPS UE
is "For object)
isSIB lower which
and than
CELL
DSCH
received
controls allocated.
code
the power the CPICH.
the
DCHvalue
This meas" of intra-frequency
parameter the
or "For parameter,
definesSIB the only". handover
the The
parameter of
seta
UE intra-frequency
adds thenon-real
(HOPS time (NRT)
powerobject)
difference
neighbor which (dB
cell is
radio
value)
included
controls bearer
tothe
thethe
in to the neighbouring
minimum
extended
intra-frequency required
systemhandover cell.
CPICH
information
ofEc/No
a real level,
(SIB11bis)
time which
(RT) when the the
radio
This parameterresult
measurement identifies
of the the parameter set
neighbouring (HOPS object)before
value oftothe
bearer the parameter
neighbouring is "For cell.SIBbis andcellCELLmust DCH exceed meas" or
controlling
the the intra-frequency handovers of a user having an HS-
"Forcell
This re-selection
parameter
SIBbis only". Theis possible.
identifies the parameter
information included set in(HOPS
SIB11bis object) is not
DSCH
controlling allocated simultaneously with an AMR speech CS RAB or
included in the SIB12. intra-frequency
SIB12 contains handovers the cellofinformation,
a user having which is
a user
standalone having push to talk allocated
SRB allocated on DCH or on HSPA. on HS-DSCH.
included in SIB11.
Identification of ADJS (Intra-Frequency Adjacency) within a
WCDMA
If
The value cell.
theintra-frequency
of this parameter neighbor is cell"Not defined" orfor
is monitored thethevaluesoft(er)of the
WCEL
handover parameter
regardless FastHSPAMobilityEnabled
of the value of the parameter is "Disabled",
AdjsSIB the if the
The
valueparameter
ADJS parameter
of the RNFC defines the origin
RtHopsIdentifier
parameter ofidentifies
the last the
FemtoHandoverControl configuration
HOPS is action
parameter
affecting
set when the
"Disabled". theIfobject.
standalone
the value ofSRB the RNFCis allocated parameter on DCH, and the ADJS
parameter HSDPAHopsIdentifier
FemtoHandoverControl is "Enabled": identifies the HOPS parameter
set when the standalone SRB is allocated on HSPA.
- the intra-frequency neighbor cell is monitored for the soft(er)
handover if the value of the parameter AdjsSIB is set to "For CELL
DCH meas only", "For SIB and CELL DCH meas" or "For SIBbis
and CELL DCH meas".
- the intra-frequency neighbor cell is not monitored for the soft(er)

handover if the value of the parameter AdjsSIB is set to "For SIB
only" or "For SIBbis only".
The total number of intra-frequency, inter-frequency and GSM

neighbor cells, which can be included in the System Information
Block type 11 (SIB11), is 47 when all cell re-selection parameters
are broadcasted. When HCS is used, the capacity is limited to 35
cells.
The System Information Block type 11bis (SIB11bis) increases the

maximum number of adjacencies to 96. SIB11bis can only be
decoded by the UEs, which support 3GPP R6.
If the total number of intra-frequency, inter-frequency and GSM


-10...50 dBm, step 0.1 dBm Not applicable
No (0), Yes (1) 0
-10...10 dB, step 0.5 dB 0 dB
For CELL DCH meas only (0), For SIB and For SIB and CELL DCH meas (1)
CELL DCH meas
Tx Diversity (1), (0),
not used For Tx
SIBbis and CELL
Diversity in use 0
DCH
(1) meas (2), For SIB only (3), For SIBbis
-50...33
only (4) dBm, step 1 dBm 21 dBm
1...100, step 1, Not defined (0) Not defined (0)
1...100, step 1, Not defined (0) Not defined (0)
1...100, step 1 0

configuration action (1), NetAct RNW plan
originated configuration action (2), Element
Manager originated configuration action (3),
Configuration action by automatic tuning
function (4), Element Manager originated
mass config action (5), NetAct originated
Nokia Value
MACRO, INTRA- MACRO, INTRA- MACRO, INTRA-

RNC, F1 RNC, F2 RNC, F3
Not applicable Not applicable Not applicable Not applicable

0 0 0 0
0 dB 0 dB 0 dB 0 dB
Not applicable Not
For applicable
SIB Not
and CELL For applicable
SIB Not
SIB and CELL
For SIB and CELL DCH meas (1) DCH meas (1) DCH meas (1) DCH meas (1)
0 0 0 0
21 dBm 24 dBm 24 dBm 24 dBm
Not defined (0) 20 21 30
Not applicable 1 7 31
Not applicable 1 7 31
Not defined (0) 11 12 13
0 1 7 31

O2 UK Value
MACRO, INTER- MACRO, INTER- MACRO, INTER- MICRO, INTRA- MICRO, INTRA-
RNC, F1 RNC, F2 RNC, F3 RNC, F1 RNC, F2
Not applicable Not applicable Not applicable Not applicable Not applicable
0 0 0 0 0
0 dB 0 dB 0 dB 0 dB 0 dB
Not
For applicable
SIB Not
SIB Not
SIB Not
SIB Not
SIB and CELL
DCH meas (1) DCH meas (1) DCH meas (1) DCH meas (1) DCH meas (1)
0 0 0 0 0
24 dBm 24 dBm 24 dBm 24 dBm 24 dBm
20 21 30 25 26
2 16 32 3 9
2 16 32 3 9
2 16 32 14 15
2 16 32 3 9
O2 UK Range for Optimisation
Femto, Inter-
MICRO, INTER- MICRO, INTER- RNC to Macro
RNC, F1 RNC, F2 and Micro F2
cells
Not applicable Not applicable Not applicable

0 0 0 default value only
0 dB 0 dB 0 dB 0 ... 5 dB, step 0.5 dB
Not
For applicable
SIB Not
SIB and CELL Not applicable
DCH meas (1) DCH meas (1) For SIB only (3)
0 0 0
24 dBm 24 dBm 24 dBm
25 26 35
4 10 35
4 10 35
14 15 35
4 10 35

Comments Classification
Identifier
RPO - Configuration
This parameter has effect only if RPO - RF Tuning
ActiveSetWeightingCoefficient is set to any
RPO - RF Tuning
value other than 0
Identifier
Identifier
Identifier
Identifier
Identifier
Identifier
Identifier
RPO - Configuration
Please refer to trial report UKRE/12/066 NWP
O2 values depend on whether f1 or f2. Identifier
O2 values depend on whether Macro or RPO - RF Tuning
Micro, whether f1 or f2, and whether
O2 values depend on whether Macro or intra or
RPO - RF Tuning
inter
Micro,RNC neighbour.
whether f1 or f2, and whether intra or
Updated Nov 2010 on activation of Multi-RAB
inter RNC
feature by neighbour.
Pinaki Roychowdhury
IPD PTY ID Discrepancy - Criticality
Frequency
10226 Every 2 hours

10235 Every 2 hours
10268 Weekly
10267 Daily
10227 Every 2 hours
10228 Monthly
10229 Monthly
Monthly
10230 Every 2 hours
10231 Every 2 hours
10232 Every 2 hours
12138 Every 2 hours
11320 Monthly
11358 Daily
10594 Every 2 hours
10233 Every 2 hours
10234 Every 2 hours
1841 Every 2 hours
10225 Every 2 hours

Issue in Which
New in RU40 New in RU50 EP1 Parameter Added
or Last Changed
9.0
9.0
6.7
5.3
5.3
5.3
9.0
New in RU40 8.0
FMCG Parameters
Abbreviated Name

AMRDirReCell
DLDPCHTxPwrClOffset
FMCGId
GSMcauseCPICHEcNo
GSMcauseCPICHrscp
GSMcauseTxPwrDL
GSMcauseTxPwrUL
GSMcauseUplinkQuality
GsmDLTxPwrThrAMR
GsmDLTxPwrThrCS
GsmDLTxPwrThrNrtPS
GsmDLTxPwrThrRtPS
GsmMaxMeasPeriod
GsmMeasAveWindow
GsmMeasRepInterval
GsmMinHoInterval
GsmMinMeasInterval
GsmMinSLHOInterval
GsmNcellSearchPeriod
GsmUETxPwrFilterCoeff
GsmUETxPwrThrAMR
GsmUETxPwrThrCS
GsmUETxPwrThrNrtPS
GsmUETxPwrThrRtPS
GsmUETxPwrTimeHyst
IMSIbasedGsmHo
ISHOClcauseCPICHEcNo
ISHOClcauseCPICHrscp
ISHOClcauseTxPwrDL
ISHOClcauseTxPwrUL
MaxBSICIdentTime
O&M Parameters
FMCGChangeOrigin
ers
Usage of Directed Retry of AMR call Inter-system Handov FMCG HC

DL DPCH Transmission Power Cancellation Offset FMCG HC
FMCG identifier FMCG HC
GSM HO caused by CPICH Ec/No FMCG HC
GSM HO caused by CPICH RSCP FMCG HC
GSM HO caused by DL DPCH TX Power FMCG HC
GSM HO caused by UE TX Power FMCG HC
GSM HO caused by UL DCH Quality FMCG HC
DL DPCH TX Power Threshold for AMR FMCG HC
DL DPCH TX Power Threshold for CS FMCG HC
DL DPCH TX Power Threshold for NRT PS FMCG HC
DL DPCH TX Power Threshold for RT PS FMCG HC
Maximum Measurement Period FMCG HC
Measurement Averaging Window FMCG HC
Measurement Reporting Interval FMCG HC
Minimum Interval Between HOs FMCG HC
Minimum Measurement Interval FMCG HC
Minimum interval between repetitive inter-RAT SLHOs FMCG HC
GSM Neighbour Cell Search Period FMCG HC
UE TX Power Filter Coefficient FMCG HC
UE TX Power Threshold for AMR FMCG AC
UE TX Power Threshold for CS FMCG HC
UE TX Power Threshold for NRT PS FMCG HC
UE TX Power Threshold for RT PS FMCG HC
UE TX Power Time Hysteresis FMCG HC
IMSI Based GSM HO FMCG HC
ISHO Cancellation caused by CPICH Ec/No FMCG HC
ISHO Cancellation caused by CPICH RSCP FMCG HC
ISHO Cancellation caused by DL DPCH TX Power FMCG HC
ISHO Cancellation caused by UE TX Power FMCG HC
Maximum BSIC Identification Time FMCG HC
Change origin FMCG O&M

Description
This parameter enables and disables the use of Directed Retry of

AMR call Inter-system
This parameter definesHandover.the cancellation threshold
If the value is 'Enabled',
(DL_DPCH_TXPWR_THRESHOLD+DLDPCHTxPwrClOffset) then AMR calls are directed to the GSM for
This
network parameter
in case identifies
of UTRAN the FMCG (object
congestion, in order for inter-system
to improve the
the DL
Frequency DPCH TX
Measurement Pwr. Control) auniquely within RNC.caused by
setup of AMR
This parameter calls.
indicates whether handover to GSM
If
lowthe value
measured is 'Disabled',
absolute then AMR calls are rejected in case is ofby
This
UTRAN parameter
congestion. indicatesCPICH whether Ec/No of the serving
a handover to GSM cellcaused
enabled.
low
Thismeasured
parameterabsolute indicatesCPICH whether RSCP of the serving
a handover to GSMcell is
caused by
enabled.
high downlink DPCH TX power is enabled.
When the handover to GSM is
This parameter indicates whether a handover to GSM caused by enabled, the RNC shall set up an
intra-frequency
high
When UE theTX power
handover CPICH level Ec/No
to GSM iswhether ismeasurement
enabled. enabled, in order
the handover
RNC shall toset monitorup an
This
Downlink
the parameter
absolute DPCH CPICH indicates
TX powerEc/No threshold
of the a handover
servingfor the cell. to GSM caused
to GSM by
is
intra-frequency
bad uplink
determined DCHon CPICH
quality RSCP
is
service-by-service enabled. measurement
basis. in order to monitor
This
UE
the TX parameter
powerCPICH
absolute determines
threshold RSCP for the thethe
of downlink
servingDPCH
handover to GSM
cell. TheTX power
ismeasurement
determined on
The measurement
threshold
service-by-service
reporting for a CS
criteriadetermines reporting
voice
basis. criteria
connection.
of the intra-frequency of the
CPICH intra-frequency CPICH
This parameter the downlink DPCHRSCP TX power
Ec/No
measurementmeasurement are defined by the Intra-frequency
threshold
This parameter for aare CS defined
data connection.
determines
by the Intra-frequency
the downlink When DPCH the handover Measurement to GSM
Measurement
When
Controlthe
caused handover
parameters
by high
Control
DL to parameters
(FMCS
DPCH GSM TX caused
object).
power
(FMCSbyenabled,
is high DL TX
object). DPCH
the
power
RNC TXstarts power
threshold
is
Thisenabled,
parameter for the a non-real
RNC
determines startstime PS
inter-RAT data
the downlink connection.
(GSM) DPCH TX measurements When
power the in
inter-RAT
handover (GSM)
to GSM measurements
caused by high inDL compressed
DPCH TX mode
power ifisthe
enabled,
compressed
threshold for mode
a number
real if
of time the DPCH TX power of a single radio link
DPCH
The
the RNC
reaches
TXstarts
maximum the
power inter-RAT
threshold. ofPS
a single
The (GSM)
DL
data
DPCH
connection.
radiomeasurements
periodical link reachesWhen
inter-RAT
TX power
the
(GSM) the handover
in threshold.
compressed
threshold
The
is RNC
to
DL GSM
DPCH
measurement caused
TX powerby
reports high DL
threshold DPCH is TX
relative power to the is enabled,
allocated the
mode
relative
This
starts if to
thethe
parameter
inter-RAT DPCH TX determines
allocated
determines
(GSM) power
maximum the
measurements
the
of maximum
a single maximum
inradio
transmission number
compressedlink allowed
powerreaches of duration
of periodical
mode the theif the
maximum
of the GSM transmission
measurement. power If of RNC
the the DPCH.
is not able to execute
threshold.
DPCH.
inter-RAT
DPCH
This parameter
The
TX (GSM)
power DL of DPCH
measurement
astops
determines
TX
singlethe power
radio
the reports threshold
(maximum
linkmeasurement
measurement reaches is relative
size of
the threshold.
reporting
to thethe
the
interval The for
handover
allocated
sliding to
maximum
averaging GSM, it transmission
window) from GSM power
which the of the
RNC DPCH. after
calculates the the UE
DL
has DPCH
periodical
sent TX
inter-RAT
the power
predefined threshold
(GSM) number is relative
measurements.
of measurement to the allocated
reports to the
This
averaged
maximum parameter GSM
transmission determines
RSSI values power the
forofminimum
the
thehandover
DPCH. interval between
decision a
algorithm.
RNC.
successful inter-RAT handover from GSM to UTRAN and the
This parameter determines the minimum interval between an
following
unsuccessful inter-RAT inter-RAT handover(GSM) attempt
measurement back to or GSM related to the
handover
This parameter
same RRC defines the
connection. minimum interval between a
procedure,
successful and the following
service- or load-based GSMinter-RAT
measurement handover procedure from GSM
This
related parameter
to the samedetermines
RRCservice- the number of periodical inter-RAT
connection.
to UTRAN
(GSM) and
measurement the next reports, or
starting load-based
from inter-RAT
the first report after the
In the CELL_DCH
handover attempt state
back the
to GSM,UE physical
related layer
to the measurement
same RRC
measurement
period for UE TXsetup,power during which
measurements a handover
is 1 slot. to TheGSM is not
Filter
connection.
This parameter
possible. This determines
period allows the
the UEUE TX
to power
find and threshold
report all for a CS
Coefficient
voice connection. parameter If the controls
handover theto higher
GSM layer
caused filtering
by highofpotential
physical
GSM
This
layer
This
neighbour
parameter
UE
parameterTX power is
cells
determines before
measurements
effective if
the
the
the UE handover
TX power
before
original thedecision.
handover threshold
event forUE
evaluation
reason a CS
is
TX
power
data level
connection. is enabled,
If reporting the
the handover RNC starts
to TXGSM inter-RAT
caused (GSM)
by high
and
This measurement
known
measurementsto be a service-
parameter determines
in compressed is performed
or load-based
the UE
mode one.
whenpower bythe the UE.
threshold
UE TX power forUE TX
a non-
power
real timelevel is
PS threshold.
dataenabled,
connection.the RNC starts inter-RAT (GSM)
reaches
This
measurements this
parameter determines
in compressedThe the UEIfmode
UEthepower
TX handover
TX whenpower threshold
the
to GSM
threshold
UE25.331TX
caused
is relative
forRRC
power a real by
to
The
high
the higher
UE
maximum TX layer
power filtering
level
TX powerThe isis described
enabled,
level anhandover the
UEpower in 3GPP
RNC
can use TS
starts
on the inter-RAT
DPCH
time
reaches PS data
this connection.
threshold. If the
UE TX to GSM
threshold caused
is relative byinhighthe
Protocol
If the(or
(GSM)
cell
UE TX theSpecification,
handover
measurements
power maximum to GSM
level is RFsection
in caused
enabled,compressed
output Filter
the
by
powerhigh
RNC
Coefficient.
modeUE
capability
starts
TX
when power
of
inter-RAT the
the is
UE UE, TX to
enabled,
(GSM)
the
the
power maximum
RNC starts
reaches TX power
inter-RAT
this threshold.level
(GSM) an
The UE can
measurements
UE TXuse power on in the DPCH isin the
compressed
threshold
whichever
The
cell parameter
measurements
(or the is lower).
maximum indicates
in compressed
RF whether
output mode the
power IMSI
when based
capabilitythe UE ofinter-RAT
TXthe power
UE,
mode
relative
handover whentothis
and the
thethreshold. UE
maximum
cell TX
change power
TXtoUE reaches
power
GSM/GPRS level a predefined
anare UEenabledcan use threshold.
in on the the If
cell.
reaches
whichever
This
the UE parameter
TXthe is
power lower). indicates
goes The
down whether TX
againRF power
anoutput
(after threshold
inter-system
the UE is
power to
TX handoverrelative
DPCH
the in
maximum cell
TX (or
power the maximum power capability of
cancellation
threshold
the
This UE, hascaused
whichever
parameter once by alevel
istriggered),
indicates lower). CPICH
whether
antheUEEc/No
UE
an
canTX use
exceeding
Power
inter-system
on the Timethe DPCH
handover Hysteresis in the
0:
cellIMSI
(or
cancellation based
the maximum inter-RAT
threshold RF
is handover
output
enabled power
orornot.cell change
capability to
of GSM/GPRS
the UE,
determines
cancellation
is notparameter
allowed the
caused time period
by a whether duringRSCP
CPICH whichexceedingthe UE TXthe power must
whichever
This
stay below isthe lower).
indicates
UE TX power threshold an inter-system
before the RNC handover calls off
cancellation
cancellation threshold
caused by is enabled
acaused
low or
measured not. Downlink DPCH
If
thethe
This
If theGSMvalue
parameter
value is '0',
measurements
is power the
indicates
'0', ISHO
the level
ISHO cancellation
whether
cancellationbyan the due
high
inter-system
duechange to
UE CPICH
to CPICH TX Ec/No
RSCP is
power.
handover
1: IMSI
Transmission
disabled. based inter-RAT handover
isTransmission
enabled and or cell
not. to GSM/GPRS
cancellation
exceeding caused by UE power decreasing tobelow
are
The
If the valuethe
enabled
feature cancellation
isMultiple
'0',
'1', the BSIC
ISHO threshold is disabled.
identification
cancellation requires
due to low a method
CPICH measuredEc/No
the
If reporting
the value
supervise
Downlink the
DPCH
threshold
is '1',
identification
Transmission
is enabled
the ISHO cancellation
measurements
power
or not.
leveldueis oftodisabled.
theCPICH UE. This RSCP is
enabled.
If
2:the
exceeding
parameter
If the
valuelimits
Immediate
value theis IMSI
'0',
is '1',
the
cancellation
the based
the
ISHOinter-RAT
maximum cancellation
threshold
ISHO cancellation time for handover due to
is BSIC
enabled.
due to orUE
low cell Transmission
identification change is
measured
power
The is
parameter
enabled DPCHper
measurements disabled. defines the origin
cell; the unitpower of
should the last configuration
be seconds. If during action this
Downlink
If the value is '1', Transmission
the ISHO cancellation leveldue is toenabled.
UE Transmission
affecting the object.
time no handover succeeded, the handover attempt to GSM is
power
finished. is enabled.
Disabled (0), Enabled (1) Disabled (0)

-6...0 dB, step 1 dB -3 dB
Disabled (0), Enabled (1) 0
Disabled
-10...0 dB,(0), Enabled
step 0.5 dB,(1)
Not used as ISHO 0
cause for CS voice connection
-10...0 dB, step 0.5 dB, Not used (126)
as ISHO -1 dB
cause
-10...0 for
dB,CS data
step 0.5connection (126)
dB, Not used as ISHO -3 dB
cause
-10...0 dB, step 0.5 dB, Not used as(126)
for NRT PS data connection ISHO -1 dB
cause for RT PS data connection (126) -3 dB
1...120 MeasRepo, step 1 MeasRepo 12 MeasReport
1...32 MeasReport, step 1 MeasReport 6 MeasReport
0.5 s (2),
1...60 1 s (3),
s, step 1 s,2Asreturn
(4), 3 handover
s (5), 4 s (6)
back to 0.5 s
Filtering
GSM is period
disabled approximates
(0) 10 ms (8), 10 s
1...60 s, period
Filtering step 1 s, Repetitive GSM
approximates 15 ms (9), 11.
measurements
Filtering
1...120 s,period are disabled
step 1approximates
s, Return (0)
30 ms
SLHOs to (10),
GSM13.
are 2s
Filtering
disabled period
(0) approximates 60 ms (11), 15. 30 s
Filtering period approximates 120 ms (12), 17.
0...20 MeasReport,
Filtering step 1 MeasReport
period approximates 240 ms (13), 19. 0 MeasReport
Filtering period approximates
-60...0 dB, step 1 dB, Not used 480as ms
ISHO(14) 8
cause
-10...0 for
dB,CS voice
step connection
1 dB, Not used (126)
as ISHO -3 dB
cause
-10...0 for
0 ms (0), CS data
dB,10step connection
ms 1(1),
dB,20Notmsused (126)
(2), 40
as ms
ISHO(3), 60 -3 dB
ms (4),for
cause 80NRT
ms (5),
PS 100
data ms (6), 120 ms
connection (7),
(126) -1 dB
-10...0
160 msdB, (8),step
200 1msdB, Not
(9), used
240 ms as ISHO
(10), 320 ms
cause
(11), for ms
640 RT PS data connection (126)ms -3 dB
This HO type(12),
is not1280 ms (13),
allowed 2560
(0), This HO type
(14), 5000 (1),
is allowed ms This
(15) HO type is allowed 320 ms (11)
immediately (2) IMSI based handover not allowed. (0)
Disabled
0.5...10 s,(0),
stepEnabled
0.1 s, If(1)
set to 0, Feature is not Disabled (0)
used. (0) 0 sec

Nokia Value
R99 DPCH HSDPA
Disabled (0) Disabled (0)

-3 dB -3 dB
1 1
1 1
1 1
1 1
1 1
-3 dB -3 dB
-3 dB -3 dB
-1 dB -1 dB
-3 dB -3 dB
12 MeasReport 12 MeasReport
0.5 s 0.5 s
10 s 10 s
2s 2s
30 s 30 s
8 8
-3 dB -3 dB
-3 dB -3 dB
-1 dB -1 dB
-3 dB -3 dB
320 ms 320 ms
IMSI based handover not allowed. (0) IMSI based handover not allowed. (0)
0 sec 0 sec

FMCG set 1 (MACRO RT & NRT, F1) FMCG set 2 (MICRO RT & NRT, F1)

-3 dB -3 dB
1 2
1 1
1 1
0 0
1 1
1 1
-3 dB -3 dB
-3 dB -3 dB
-1 dB -1 dB
-3 dB -3 dB
0.5 s 0.5 s
10 s 10 s
2s 2s
30 s 30 s
11 11
-3 dB -3 dB
-3 dB -3 dB
-1 dB -1 dB
-3 dB -3 dB
320 ms 320 ms
Enabled (1) Enabled (1)
0 sec 0 sec

FMCG set 7 (MACRO RT & NRT, F2) FMCG set 8 (MACRO RT , F3)

-3 dB -3 dB
7 8
1 1
1 1
0 0
1 1
1 1
-3 dB -3 dB
-3 dB -3 dB
-1 dB -1 dB
-3 dB -3 dB
0.5 s 0.5 s
10 s 10 s
2s 2s
30 s 30 s
11 11
-3 dB -3 dB
-3 dB -3 dB
-1 dB -1 dB
-3 dB -3 dB
320 ms 320 ms
0 sec 0 sec

FMCG set 9 (TWO Carrier MICRO RT, F2) FMCG set 12 (MICRO NRT, F1)

-3 dB -3 dB
9 12
1 1
1 0
0 0
1 0
1 1
-3 dB -3 dB
-3 dB -3 dB
-1 dB -1 dB
-3 dB -3 dB
0.5 s 0.5 s
10 s 10 s
2s 2s
30 s 30 s
11 11
-3 dB -3 dB
-3 dB -3 dB
-1 dB -1 dB
-3 dB -3 dB
320 ms 320 ms
0 sec 0 sec

FMCG set 15 (MACRO NRT, F1) FMCG set 16 (TWO Carrier MICRO NRT, F2)

-3 dB -3 dB
15 16
1 1
0 0
0 0
0 0
1 1
-3 dB -3 dB
-3 dB -3 dB
-1 dB -1 dB
-3 dB -3 dB
0.5 s 0.5 s
10 s 10 s
2s 2s
30 s 30 s
11 11
-3 dB -3 dB
-3 dB -3 dB
-1 dB -1 dB
-3 dB -3 dB
320 ms 320 ms
0 sec 0 sec

O2 UK Value
FMCG set 18 (MACRO NRT, F2) FMCG set 19 (MACRO NRT , F3)

-3 dB -3 dB
18 19
1 1
0 0
0 0
0 0
1 1
-3 dB -3 dB
-3 dB -3 dB
-1 dB -1 dB
-3 dB -3 dB
0.5 s 0.5 s
10 s 10 s
2s 2s
30 s 30 s
11 11
-3 dB -3 dB
-3 dB -3 dB
-1 dB -1 dB
-3 dB -3 dB
320 ms 320 ms
0 sec 0 sec

UK Value
FMCG set 20 (MACRO HSDPA, F1) FMCG set 21 (MACRO HSDPA, F2)

-3 dB -3 dB
20 21
1 1
0 0
0 0
0 0
0 0
-3 dB -3 dB
-3 dB -3 dB
-1 dB -1 dB
-3 dB -3 dB
0.5 s 0.5 s
10 s 10 s
2s 2s
30 s 30 s
11 11
-3 dB -3 dB
-3 dB -3 dB
-1 dB -1 dB
-3 dB -3 dB
320 ms 320 ms
0 sec 0 sec

FMCG set 22 (MACRO HSDPA, F3) FMCG set 25 (MICRO RT with HSDPA, F1 )

-3 dB -3 dB
22 25
1 1
0 1
0 0
0 1
0 0
-3 dB -3 dB
-3 dB -3 dB
-1 dB -1 dB
-3 dB -3 dB
0.5 s 0.5 s
10 s 10 s
2s 2s
30 s 30 s
11 11
-3 dB -3 dB
-3 dB -3 dB
-1 dB -1 dB
-3 dB -3 dB
320 ms 320 ms
0 sec 0 sec

FMCG set 26 (TWO Carrier MICRO FMCG set 41 (MACRO RT with HSDPA, F1)
HSDPA, F2) Multi-RAB

-3 dB -3 dB
26 41
1 1
0 1
0 0
0 1
0 0
-3 dB -3 dB
-3 dB -3 dB
-1 dB -1 dB
-3 dB -3 dB
0.5 s 0.5 s
10 s 10 s
2s 2s
30 s 30 s
11 11
-3 dB -3 dB
-3 dB -3 dB
-1 dB -1 dB
-3 dB -3 dB
320 ms 320 ms
0 sec 0 sec

FMCG set 42 (MACRO RT with HSDPA, F2) FMCG set 43 (MACRO RT with HSDPA, F3)
Multi-RAB Multi-RAB

-3 dB -3 dB
42 43
1 1
1 1
0 0
1 1
0 0
-3 dB -3 dB
-3 dB -3 dB
-1 dB -1 dB
-3 dB -3 dB
0.5 s 0.5 s
10 s 10 s
2s 2s
30 s 30 s
11 11
-3 dB -3 dB
-3 dB -3 dB
-1 dB -1 dB
-3 dB -3 dB
320 ms 320 ms
0 sec 0 sec

FMCG set 44 (MICRO RT with HSDPA, F1) FMCG set 45 (TWO Carrier MICRO RT with
Multi-RAB HSDPA, F2) Multi-RAB

-3 dB -3 dB
44 45
1 1
1 1
0 0
1 1
0 0
-3 dB -3 dB
-3 dB -3 dB
-1 dB -1 dB
-3 dB -3 dB
0.5 s 0.5 s
10 s 10 s
2s 2s
30 s 30 s
11 11
-3 dB -3 dB
-3 dB -3 dB
-1 dB -1 dB
-3 dB -3 dB
320 ms 320 ms
0 sec 0 sec

optimised in v8.5 to reduce excessive CM &

IFHO
Applicable to load and service based handover
Changed to 11 (from 8) following the ISHO Trial

in Aug 2006. See UKRE_06_037. NOTE: in
RU20 11 maps to 60ms.
NWP 12238 Extended Discrepancy

NWP 12058
NWP 12059
NWP
NWP
Frequency
Monthly
Monthly
Weekly
Weekly
Weekly
Weekly
Weekly
Weekly
Weekly
Weekly
Weekly
Weekly
Weekly
Weekly
Weekly
Weekly
Weekly
Weekly
Weekly
Weekly
Weekly
Weekly
Weekly
Weekly
Monthly
Monthly
Monthly
Monthly
RU20 on TOP

4.5
4.5
5.9
5.9
9.0
9.0
9.0
9.0
4.5
4.5
4.5
4.5
FMCI Parameters

FMCIId FMCI identifier
IFHOcauseCPICHEcNo IFHO caused by CPICH Ec/No
IFHOcauseCPICHrscp IFHO caused by CPICH RSCP
IFHOcauseTxPwrDL IFHO caused by DL DPCH TX Power
IFHOcauseTxPwrUL IFHO caused by UE TX Power
IFHOcauseUplinkQuality IFHO caused by UL DCH Quality
IMSIbasedIFHO IMSI Based IFHO
InterFreqDLTxPwrThrAMR DL DPCH TX Power Threshold for AMR
InterFreqDLTxPwrThrCS DL DPCH TX Power Threshold for CS
InterFreqDLTxPwrThrNrtPS DL DPCH TX Power Threshold for NRT PS
InterFreqDLTxPwrThrRtPS DL DPCH TX Power Threshold for RT PS
InterFreqMaxMeasPeriod Maximum Measurement Period
InterFreqMeasAveWindow Measurement Averaging Window
InterFreqMeasRepInterval Measurement Reporting Interval
InterFreqMinHoInterval Minimum Interval Between HOs
InterFreqMinMeasInterval Minimum Measurement Interval
InterFreqMinSLHOInterval Minimum interval between repetitive IF SLHOs
InterFreqNcellSearchPeriod Neighbour Cell Search Period
InterFreqUETxPwrFilterCoeff UE TX Power Filter Coefficient
InterFreqUETxPwrThrAMR UE TX Power Threshold for AMR
InterFreqUETxPwrThrCS UE TX Power Threshold for CS
InterFreqUETxPwrThrNrtPS UE TX Power Threshold for NRT PS
InterFreqUETxPwrThrRtPS UE TX Power Threshold for RT PS
InterFreqUETxPwrTimeHyst UE TX Power Time Hysteresis
MBLBMobilityOffset MBLB due to Mobility EcNo Offset
MBLBMobilityRABComb MBLB due to Mobility RAB Combinations
O&M Parameters
FMCIChangeOrigin Change origin
FMCI HC
FMCI HC
FMCI HC
FMCI HC
FMCI HC
FMCI HC
FMCI HC
FMCI HC
FMCI HC
FMCI HC
FMCI HC
FMCI HC
FMCI HC
FMCI HC
FMCI HC
FMCI HC
FMCI HC
FMCI HC
FMCI HC
FMCI HC
FMCI HC
FMCI HC
FMCI HC
FMCI HC
FMCI HC
FMCI HC
FMCI O&M
Description
This parameter identifies the FMCI (object for inter-frequency Frequency

Measurement
This parameterControl)
indicatesuniquely
whetherwithin RNC.
an inter-frequency handover caused by low
measured
This parameter absolute indicatesCPICH Ec/No an
whether of the serving cell is
inter-frequency enabled.caused by low
handover
measured
This parameter absolute indicatesCPICH RSCP an
whether of the serving cell is enabled.caused by high
When the inter-frequency handover isinter-frequency
enabled, the RNC handover
shall set up an intra-
downlink
frequency
This parameter DPCH
CPICH TX power
Ec/No
indicates whether is enabled.
measurement in order
anisinter-frequency to monitor
handoverthe absolute
caused CPICH
When the inter-frequency handover enabled, the RNC shall set up anby high
intra-
Ec/No
UE TX
frequency of the
powerCPICHserving
level is
RSCP cell.
enabled.
measurement in order to monitor the absolute CPICH
This parameter
Downlink DPCHindicates TX powerwhether threshold an for
inter-frequency
the inter-frequency handover causedisby bad
handover
RSCP
uplink
determined of theon
DCH serving
quality is cell.
enabled.
service-by-service The measurement
basis. reporting criteria of the intra-
The
UE measurement
parameter
TX
frequency powerCPICH threshold reporting
indicates
RSCPfor criteria
whether of
the IMSI
the inter-frequency
measurement the intra-frequency
arebased CPICH
inter-frequency
handover
defined by theisIntra-frequency
determined Ec/Noon is
handover
measurement
enabled are
in the Control
cell. defined
Theparameters by
parameterthe Intra-frequency
can have one Measurement Control
service-by-service
Measurement
This parameter basis.
determines (FMCS
the downlink object).
DPCH TXofpower
the following
threshold values:
for a CS
parameters (FMCS object).
voice
This connection.
parameter When the
determines thehandover inter-frequency
downlink is DPCH handover
TX power threshold forDL
caused by high a CSDPCH data
0:
TX IMSI
power based
is inter-frequency
enabled, the RNC starts not allowed
inter-frequency measurements in
connection.
This parameter When the
determines inter-frequency
the downlink handover caused by high DL DPCH TX
compressed
power isbased mode
enabled, if the
the RNC DPCH starts powerDPCH
TXinter-frequency of a single TX power radio threshold
measurements link reaches for a
in compressedthenon-real
1:
timeIMSI
PS
threshold. data
The inter-frequency
connection.
DL DPCH When
TX handover
powerthe threshold is enabled
inter-frequency is handover
relative to the caused
allocated by high
maximum DL
This
mode parameter
ifTXthepower
DPCH determines
TX powerthe of downlink
aRNCsingle DPCH
radio linkTXreaches
power threshold
the threshold. for a The real DL
DPCH
transmission
time PSTX data power is
connection. enabled,
of the DPCH.
When the starts
the inter-frequency
inter-frequency inter-frequency
handover measurements
caused by high DL in
DPCH
2:
The Immediate
maximum
compressed power IMSI
mode threshold
number based theofDPCH
ifenabled, is relative
inter-frequency
periodicalTX to the
power ofallocated
handover
a singleis maximum
enabled
measurement
radio link transmission
reachesreports the in
DPCH
power
determines TX
of power
the theDPCH. is
maximum the
allowed RNC starts
duration ofinter-frequency
the inter-frequency measurements
measurement. If
threshold.
This parameter
compressed The mode DL DPCH
determines TX power
the maximum threshold
power number is relative to
of periodicalthe allocated
inter-frequency maximum
the RNC is not
transmission
measurement powerableifof
reports tothe
the
DPCH
execute
(maximumDPCH.
TXinter-frequency
an size of the
of a single
sliding
radio link
handover,
averaging
reaches
itwindow)
shall stop the
fromthe inter-
threshold.
This parameter
frequency The DL
measurement DPCH after
determines TXthe power threshold
measurement sentis relative
reporting to the number
interval allocated ofmaximum
for periodical
where the RNC
transmission
inter-frequency power calculates
of
measurements. the the the
DPCH.
UE
averaged hasCPICH the predefined
Ec/No and RSCP values for the
measurement
This parameter
decision algorithm reports
determines
of the to the RNC.
the minimum handover.
inter-frequency interval between a successful inter-
frequency
This parameter handover determines and thethe following
minimum inter-frequency
interval between handover attempt related
an unsuccessful inter-to
the same
frequency RRC connection.
measurement or minimum
handover intervalprocedure, and the following inter-
This parameter defines the between a successful service- or
frequency
load-based measurement
inter-frequency procedure
handover related
and the to the
next same
service-RRC or connection.
load-based
This parameter determines the number of periodical inter-frequency
handover
measurement attempt reports,related to the same theRRC connection.
In the CELL_DCH statestarting
the UEfrom physical first
layer report after the measurement
measurement period for UEsetup, TX
during
power which
measurementsan inter-frequency
is 1 slot. handover
The Filter is not
Coefficient allowed. This
parameter period
controls allowsthe the
This
This
UE parameter
parameter
to find and is effective
determines
report all inside the same
the UEneighbouring
potential TX power thresholdRNC but
cells also in
for athe
before the target
CSinter-frequency RNC
voice connection. after
higher
relocation,
If layerif filtering
theparameter the original
inter-frequency ofhandover
physical
handover layer
caused UEbyTX
reason is
high power
knownUE TX measurements
to be a service-
power level before
isorenabled, the the
load-based
handover
This
event decision.
evaluation determines
and measurement the UE TX power
reporting threshold
is performed for a by CSthe data
UE. connection.
one.
RNC starts inter-frequency measurements in compressed mode when the UE TX
If theparameter
This inter-frequency determines handover theThecaused
UE TXTX by high
power UE TX power
threshold for is level
a relative
non-real is enabled,
time the
power
RNC reaches
starts the
inter-frequency threshold. UE
measurements power
in threshold
compressed mode when to the PS
the UE TX
The
data higher
connection.layer filtering
If the isan described
inter-frequency inhandover
3GPP TSDPCH25.331
caused byRRC Protocol
maximum
This
power parameter TX
reaches
Specification,
powerdetermines
the
section
level
threshold.
Filter theUE UE
The can
UE
Coefficient. TXuse power
TX on
power the
threshold
threshold in
for ahigh
the
is cell
real
relative
UE(orTX
time the
to PS power
thedata
level
maximum is enabled,
RF outputthe RNC
power starts inter-frequency measurements in compressed
connection.
maximum TX If power
If the inter-frequency
mode when the
the inter-frequency
UEstartsTXlevel
handoverancapability
power UE can
caused
reaches
of the
handover
use byon
the high
UE,
caused
theUE
threshold.
whichever
DPCH by power
TX high
Thein UE
theis
UE lower).
cell
is
TX
TX (orpower
enabled,
power
level
thethreshold
the is
RNC
enabled,
maximum
starts the
RFthe RNC
inter-frequencyoutput power inter-frequency
measurementscapabilitylevel measurements
of compressed
in theanUE, whichever
modein compressed
is the
whenlower). the mode
UEinTX
is
whenrelative
Multi-Bandthe to
UELoadTXamaximum
Balancing
power TX
reaches duepower
to
themobility
threshold. canUE becan
The done
UE use on
when
TX power theDPCH quality
threshold the
is cell
criteria
power
(or the
defined reaches
maximum
with this predefined
RF
parameter output isthreshold.
power
met. If
capability
Quality the UE
of
criteria theTXis power
UE, goes
whichever
evaluated downis
comparing again
lower). CPICH
relative
This
(after toUE
parameter
the theTX maximum
defines
power TX RAB
the
thresholdpower level
combinations
has once an UE canwhich
for
triggered), usethe on theTX
Multi-Band
UE DPCH Load
Power in the
Time cell
Ec/No
(or the
Balancing of new
maximum
due cell
to RFwith
mobility different
output is power preferred
allowed. capability layer of definition
the UE, than
whichever currentlyis used
lower). and
Hysteresis
CPICH Ec/No determines
of serving theHSDPA
time period cell induringthe active whichset. theThis
UE TX power must
parameter defines staythe
below the UEtoTX
offsetparameter
added new power cellthe threshold
CPICH EcNobefore the RNC calls off the inter-frequency
The
measurements defines
caused by highorigin UE ofTX thebefore it is compared
last configuration
power.
to CPICH
action affecting EcNo theof
serving
object. HSDPA cell. If CPICH Ec/No of new cell plus value of this parameter is
equal or greater than CPICH Ec/No of serving cell, compressed mode (CM) for
Multi-Band Load Balancing due to mobility shall be started.
Range and Step
1...100, step 1
Disabled (0), Enabled (1)
Disabled
IMSI based(0),handover
Enabled not
(1) allowed (0), IMSI based handover allowed (1),
Immediate IMSI 0.5
-10...0 dB, step based
dB, handover
Not used allowed
as IFHO(2)
cause for CS voice connection
(126)
-10...0 dB, step 0.5 dB, Not used as IFHO cause for CS data connection
(126)
-10...0 dB, step 0.5 dB, Not used as IFHO cause for NRT PS data
connection (126)0.5 dB, Not used as IFHO cause for RT PS data connection
-10...0 dB, step
(126)
1...120 MeasRepo, step 1 MeasRepo
1...32 MeasReport, step 1 MeasReport
0.5 s (2), 1 s (3), 2 s (4), 3 s (5), 4 s (6)
1...60 s, step 1 s, Repetitive inter-frequency handovers are disabled (0)
1...60 s, period
Filtering step 1 s, Repetitive inter-freq.
approximates 10 ms (8),measurements
Filtering periodare disabled (0) 15 ms
approximates
(9), 11. Filtering period approximates 30 ms (10), 13.
1...120 s, step 1 s, Repetitive IF SLHOs are disabled (0) Filtering period
approximates 60 ms (11), 15. Filtering period approximates 120 ms (12), 17.
0...20 MeasReport,
Filtering step 1 MeasReport
period approximates 240 ms (13), 19. Filtering period approximates
480 ms (14)
-10...0 dB, step 1 dB, Not used as IFHO cause for CS voice connection (126)
-10...0
-10...0 dB,
dB, step
step 1
1 dB,
dB, Not
Not used
used as
as IFHO
IFHO cause
cause for
for CS
NRTdata
PS connection (126)
data connection
(126)
-10...0 dB,10step
0 ms (0), ms 1(1),
dB,20Not
msused as ms
(2), 40 IFHO
(3),cause
60 msfor RT80PS
(4), msdata
(5),connection
100 ms (6),
(126)
120 ms (7), 160 ms (8), 200 ms (9), 240 ms (10), 320 ms (11), 640 ms (12),
1280 ms (13), 2560 ms (14), 5000 ms (15)
-6...6 dB, step 0.5 dB
all (0), NRT (1)
Not defined (0), Network originated configuration action (1), NetAct RNW
plan originated configuration action (2), Element Manager originated
configuration action (3), Configuration action by automatic tuning function
(4), Element Manager originated mass config action (5), NetAct originated
Default Value Nokia Value
R99 DPCH

0 1
0 1
0 1
0 1
0 1
IMSI based handover not allowed (0) IMSI based handover not allowed (0)
-1 dB -1 dB
-3 dB -3 dB
-1 dB -1 dB
-3 dB -3 dB
6 MeasRep 6 MeasReport
0.5 s 0.5 s
10 s 10 s
2s 2s
30 s 30 s
Filtering period approximates 10 ms Filtering period approximates 10 ms
-3 dB -3 dB
-3 dB -3 dB
-1 dB -1 dB
-3 dB -3 dB
1280 ms 1280 ms
2 dBm 2 dBm
all (0) all (0)

Nokia Value
FMCI set 1 ( MACRO RT & NRT)

NOT USED
HSDPA
Not applicable 1
1 0
1 0
1 0
1 0
1 0
-1 dB -1 dB
-3 dB -3 dB
-1 dB -1 dB
-3 dB -3 dB
0.5 s 0.5 s
10 s 10 s
2s 2s
30 s 30 s
Filtering period approximates 10 ms 11 (Filtering period approximates 60 ms)
-3 dB -3 dB
-3 dB -3 dB
-1 dB -1 dB
-3 dB -3 dB
1280 ms 1280 ms
2 dBm 2 dBm
all (0) all (0)

FMCI set 3 ( MICRO RT & NRT, F1) FMCI set 7 (MACRO RT & NRT, F1, F2)
3 7
0 1
0 1
0 0
0 1
0 1
-1 dB -1 dB
-3 dB -3 dB
-1 dB -1 dB
-3 dB -3 dB
0.5 s 0.5 s
10 s 10 s
2s 2s
30 s 30 s
11 (Filtering period approximates 60 ms) 11 (Filtering period approximates 60 ms)
-3 dB -3 dB
-3 dB -3 dB
-1 dB -1 dB
-3 dB -3 dB
1280 ms 320 ms
2 dBm 2 dBm
all (0) all (0)

FMCI set 8 (MACRO RT & NRT, F3) FMCI set 9 (TWO Carrier MICRO RT & NRT,
F2)
8 9
1 1
1 1
0 0
1 1
1 1
-1 dB -1 dB
-3 dB -3 dB
-1 dB -1 dB
-3 dB -3 dB
0.5 s 0.5 s
10 s 10 s
2s 2s
30 s 30 s
-3 dB -3 dB
-3 dB -3 dB
-1 dB -1 dB
-3 dB -3 dB
320 ms 320 ms
2 dBm 2 dBm
all (0) all (0)

FMCI set 10 ( MICRO HSDPA, F1) FMCI set 11 ( MACRO RT with HSDPA)
Multi-RAB
NOT USED
10 11
0 0
0 0
0 0
0 0
0 0
-1 dB -1 dB
-3 dB -3 dB
-1 dB -1 dB
-3 dB -3 dB
0.5 s 0.5 s
10 s 10 s
2s 2s
30 s 30 s
-3 dB -3 dB
-3 dB -3 dB
-1 dB -1 dB
-3 dB -3 dB
320 ms 1280 ms
2 dBm 2 dBm
all (0) all (0)

O2 UK Value
FMCI set 12 (MACRO RT with HSDPA, F1, F2 FMCI set 13 (MACRO RT with HSDPA, F3)
Multi-RAB)
12 13
1 1
1 1
0 0
1 1
0 0
-1 dB -1 dB
-3 dB -3 dB
-1 dB -1 dB
-3 dB -3 dB
0.5 s 0.5 s
10 s 10 s
2s 2s
30 s 30 s
-3 dB -3 dB
-3 dB -3 dB
-1 dB -1 dB
-3 dB -3 dB
320 ms 320 ms
2 dBm 2 dBm
all (0) all (0)

FMCI set 14 ( MICRO RT with HSDPA, FMCI set 15 (TWO Carrier MICRO RT with
F1) Multi-RAB HSDPA, F2) Multi-RAB
14 15
0 1
0 1
0 0
0 1
0 0
-1 dB -1 dB
-3 dB -3 dB
-1 dB -1 dB
-3 dB -3 dB
0.5 s 0.5 s
10 s 10 s
2s 2s
30 s 30 s
-3 dB -3 dB
-3 dB -3 dB
-1 dB -1 dB
-3 dB -3 dB
1280 ms 320 ms
2 dBm 2 dBm
all (0) all (0)

FMCI set 20 ( MACRO HSDPA) FMCI set 21 (MACRO HSDPA F1, F2)
NOT USED
20 21
0 1
0 1
0 0
0 1
0 0
-1 dB -1 dB
-3 dB -3 dB
-1 dB -1 dB
-3 dB -3 dB
0.5 s 0.5 s
10 s 10 s
2s 2s
30 s 30 s
-3 dB -3 dB
-3 dB -3 dB
-1 dB -1 dB
-3 dB -3 dB
320 ms 320 ms
2 dBm 2 dBm
all (0) all (0)

FMCI set 22 (MACRO HSDPA, F3) FMCI set 26 (TWO Carrier MICRO HSDPA, F2)
22 26
1 0
1 0
0 0
1 0
0 0
-1 dB -1 dB
-3 dB -3 dB
-1 dB -1 dB
-3 dB -3 dB
0.5 s 0.5 s
10 s 10 s
2s 2s
30 s 30 s
-3 dB -3 dB
-3 dB -3 dB
-1 dB -1 dB
-3 dB -3 dB
320 ms 320 ms
2 dBm 2 dBm
all (0) all (0)

O2 UK Range for
Comments Classification IPD PTY ID
Optimisation
NWP 11511
NWP 11465
NWP 11508
NWP 11510
NWP 11444
optimised in v8.5 NWP 11485
to reduce CM &
NWP
IFHO
NWP 11480
NWP 11530
NWP 11523
NWP 11491
NWP 11493
NWP 11525
NWP 11458
NWP 11498
NWP 11467
NWP 12119
NWP 11518
Value aligned on NWP 11537
NWP 11505
NWP 11499
NWP 11472
NWP 11446
NWP 11440
NWP
NWP
NWP
Discrepancy - Criticality Discrepancy Checking Frequency New in RU20
Extended Discrepancy Weekly

Weekly
Weekly

New in RU20 on TOP New in RU30 New in RU40
New in RU30
New in RU30
Issue in Which Parameter Added or
New in RU50 EP1
Last Changed
5.9
5.9
5.9
5.9
9.0
9.0
5.4
9.0
FMCS Parameters
Abbreviated Name Full Name Managed Object Group

ActiveSetWeightingCoefficient Active Set Weighting Coefficient FMCS HC
AdditionReportingInterval Addition Reporting Interval FMCS HC
AdditionTime Addition Time FMCS HC
AdditionWindow Addition Window FMCS HC
DSRepBasedSHO Detected Set Reporting Based SHO FMCS HC
DropReportingInterval Drop Reporting Interval FMCS HC
DropTime Drop Time FMCS HC
DropWindow Drop Window FMCS HC
EDCHAddEcNoOffset Allow E-DCH usage EcNo offset FMCS HC
EDCHRemEcNoOffset CPICH EcNo offset E-DCH usage removal FMCS HC
EcNoFilterCoefficient CPICH Ec/No Filter Coefficient FMCS HC
FMCSId FMCS identifier FMCS HC
HHoEcNoCancel CPICH Ec/No HHO Cancellation FMCS HC
HHoEcNoCancelTime CPICH Ec/No HHO Cancellation Time FMCS HC
HHoEcNoThreshold CPICH Ec/No HHO Threshold FMCS HC
HHoEcNoTimeHysteresis CPICH Ec/No HHO Time Hysteresis FMCS HC
HHoRscpCancel CPICH RSCP HHO Cancellation FMCS HC
HHoRscpCancelTime CPICH RSCP HHO Cancellation Time FMCS HC
HHoRscpFilterCoefficient CPICH RSCP HHO Filter Coefficient FMCS HC
HHoRscpThreshold CPICH RSCP HHO Threshold FMCS HC
HHoRscpTimeHysteresis CPICH RSCP HHO Time Hysteresis FMCS HC
IMSIbasedSHO IMSI Based SHO FMCS HC
MaxActiveSetSize Maximum Active Set Size FMCS HC
ReplacementReportingInterval Replacement Reporting Interval FMCS HC
ReplacementTime Replacement Time FMCS HC
ReplacementWindow Replacement Window FMCS HC
O&M Parameters
FMCSChangeOrigin Change origin FMCS O&M
Description Range and Step Default Value
Active Set Weighting Coefficient (W) is used to weight either 0...2, step 0.1 0
the
When measurement
a monitoredresult of thethe
cell enters best active set
reporting rangecell and (M_best) triggers or No periodical reporting (0), 0.25 s. Not allowed (1), 0.5 s (2), 0.5 s
the
event sum 1A of measurement
(cell addition), results
the UEthe of all
transmits active set
a Measurement cells 1
When
(M_sum) a monitored
when the cell UE enters
calculates reporting
the reporting range range (additionfor the 0 sms
(3), 2 10
(0), s (4),
ms4(1),
s (5),
20 8ms
s (6),
(2), 16
40 sms
(7)(3), 60 ms (4), 80 ms
100 ms
Report
window), to the
the RNC.
cell must If the RNC
continuously is not able
stay to add
within the thereporting (5), 100 dB,
ms (6),
events
Addition
monitored 1A (cell
Window addition)
determines and 1B
the (dropping
relative of
threshold cell). (A_Win) 0...14.5 step120
0.5 ms
dB (7), 160 ms (8), 200 ms (9), 240 ms 4 dB
range
used byforthe acellgiven to the
UEreport toperiod
active
calculate of timeset, the
the before
UE the
reporting
continues
UE can
range
reporting
of eventsend a1A. (10), 320 ms (11), 640 ms (12), 1280 ms (13), 2560 ms (14),
after
The the
parameter
Measurement initial indicates
Report by
to reverting
whether
the RNC to
the
in periodical
Detected
order to add measurement
Set the Reporting
cell into DSR
5000 ismsnot allowed (0), DSR based SHO is not allowed (1),
(15) DSR is not allowed (0)
The
The formula
threshold
reporting. The is: is W * M_sum
either relative
parameter +
Addition ( 1
to the - W )* M_best
CPICH Interval
Reporting Ec/No
(DSR)
the
When activebased
an set
active soft/softer
(eventcell 1A).
enters handover
Thethe length is
reporting enabled
of this
range in
period the
and iscell.
triggers DSR
No periodicalSHO
based is enabled
reporting (2) s. Not allowed (1), 0.5 s (2),
(0), 0.25
measurement
determines the result
interval of thebetweenbest active periodical set cell (M_best),feature
measurement or to 1 s (3)
When
controlled
event the(cell
1B Detected
by the Set
parameter
deletion), Reporting
the Addition
UE and
transmits Time.Measurements
a (M_sum),
Measurement 1
the
When sum
reports
(optional) an of
when active
active such
is enabled set set measurement
reporting
cell leaves is triggered
the results
reporting by the
range event (drop1A. 0 sms(3), 2 10
(0), s (4),
ms4(1),
s (5),
20 8mss (6),
(2), 16
40 sms
(7)(3), 60 ms (4), 80 ms
640 ms
Report
depending
window), to the
the RNC.
oncell themust Ifinthe
value
theRNC RNC,
of the parameter
continuously
the able
is not parameter
stay to remove
Active
outside
can have
Set the the
the reporting (5), 100 dB,
ms (6),
following
Drop
active
WeightingWindow values:
cellafrom determines
Coefficientthe active
(W). the
set,
When relative
the UECPICH
the threshold
continues Ec/No (D_Win)
reporting 0...14.5 step120
0.5 ms
dB (7), 160 ms (8), 200 ms (9), 240 ms 6 dB
range
which for
is used given by period
the UE of
to time
calculate before thethe UE
reporting can send aof
range (10), 320 ms (11), 640 ms (12), 1280 ms (13), 2560 ms (14),
after
When the
measurement
Measurementthe initial
E-DCH report
result
Report by
of
channeltoa reverting
monitored
the typeRNC is to
going
in periodical
cell
order (M_new)
to be
to measurement
enters
selected,
remove the
the
theEc/Nocell -10...6
5000 ms dB, step 0.5 dB
(15) 0 dB
0: DSR
event
reporting. is
1B.range,not
The allowed.
threshold
parameter isDrop
either relative
Reporting to the CPICH
Interval determines
reporting
RNC
from
1: DSR checks
the active
is enabledthe setthe UE
downlink
(event
but SHOtransmits
CPICH
1B).to The
detecteda Measurement
Ec/No
length values
cellof isthis
not of Report
the
period
allowed. cells,
is to
When
measurementthe E-DCH result is used,
of the the RNC follows the downlink -10...6 dB, step 0.5 dB 2 dB
the
which interval
RNC
controlled are ininbybetween
order
the
the DCHto add
parameter activethebest
periodical set
Drop
active
measurement
monitored but not
Time.
set
cell
in cell
the (M_best)
intoreports
the active
E-DCH whenorset:
active to
CPICH
the
such
In sum
the Ec/No
of
reporting
CELL_DCH active values
is set
triggered
state of the
measurement
the by cells
UE the that
physical are1B.
results
event in(M_sum),
layer themeasurement
DCH active Filtering period of 200 ms (0), Filtering period approximates
set. If the 3
When
set but
depending thenotCPICH
soft
in
onthe handover Ec/No value
E-DCH based
active ofon any
set. Ifof
the those
Detected
the CPICH cellsSetEc/NoisReporting
greater
value
period
M_new
than
This
feature the for>=
CPICH
parameter W
(optional) *the
intra-frequency
M_sum valueof
Ec/No
identifies
is enabled+ofthe the
CPICH
(the
1 -in W parameter
serving
FMCS the )*Ec/No
M_best
cell
(object
RNC,
Active
measurements
plus
the -for
A_Win
the Set offset
intra-frequency
parameter
is 200
value
can
300 ms (1),
1...100, stepFiltering
1 period approximates 400 ms (2),
of any
Weighting
ThisThe of
parameterthose
Coefficientcells becomes
isparameter, (W).
part of System When greaterthe than
CPICH
Information CPICH
Ec/No
Block Ec/No
11/12. of Not applicable
ms.
defined
Frequency Filter
with thisCoefficient
Measurement parameter
the
Control) RNC controls
does
uniquely not the
within higher
choose RNC. layer
the E- Filtering period approximates 600 ms (3), Filtering period
have
the
If the the
serving
measurement following
cellresult
inter-frequency plusvalues:the
oforan offset
active
inter-RAT value set defined
cellmeasurements
(GSM) (M_old) with leaves
handover this caused the by -24...0 dB, step 1 dB
filtering
DCH of physical
channel type layer
for the CPICH
uplink. Ec/No before approximates 800 ms (4), Filtering period approximates 1100 -9 dB
parameter,
reporting
low
the measured
event the absolute
range,
evaluation RNC the UE switches
and transmits
CPICH the
measurement Ec/Nochannel
a Measurement type from
isreporting
enabled, isthe the
Report RNC
performedE-to msms (5), Filtering
If
0:
DCHthe
DSR inter-frequency
to is
the not DCH allowed. in theor uplink.
inter-RAT (GSM) handover caused by 0 (0), 10 ms period
(1), 20 approximates
ms (2), 40 ms 1600 msms
(3), 60 (6)(4), 80 ms 1280 ms
the
starts
by
After RNC
the the
theUE. ininter-frequency
order to remove
modification of the the
or parameter
GSM cell from
measurement
the the new active inthe
value set: shall be
low
2:
If measured
DSR
the based
inter-frequency absolute
SHOwhen CPICH
isorenabled.
inter-RAT Ec/No (GSM) is enabled,
handover RNC
causedthe by (5), 100 ms (6), 120
-24...0 dB, step 1 dB ms (7), 160 ms (8), 200 ms (9), 240 ms
compressed mode all -12 dB
used
starts
After
low
for
thenew
the
measured
connections.
inter-frequency
modification absolute of the
CPICHor active
GSM
parameterEc/No
set cells
measurement
the
is
have in
new
enabled,
triggered
value the shall
UE be (10), 320 ms (11), 640 ms (12), 1280 ms (13), 2560 ms (14),
M_old
reporting
The
If thehigher<= W
event *
layer
inter-frequency M_sum
1F for
filtering +
orthe (
CPICH is1 - W Ec/No.
described
inter-RAT )* M_best
(GSM) The
incells
3GPP-
RNC D_Win
handover cancels
TStriggered
25.331 the
causedthe by 0 ms (0), 10 ms (1), 20 ms (2), 40 ms (3), 60 ms (4), 80 ms
compressed
This
used parameter
for mode affects when allcontent
active set
of System have Information 5000 ms (15) 100 ms (6)
transmits
event
reporting 1Fnew
RRCmeasured
low Protocol anan
of
event
connections.
eventactive
1F
1F
Specification.
absolute for
triggered
set
CPICH cell ifEc/No.
CPICH measurement
the
Ec/No CPICHTheis Ec/No
enabled,
RNC
report
cancelsthe toUEthe
the (5), 100 ms (6), 120 ms (7), 160 ms (8), 200 ms (9), 240 ms
Block
If
RNC type 11&12.
the when
inter-frequency ofor inter-RAT (GSM) handover caused by -115...-25 dBm, step 1 dBm -102 dBm
measurement
transmits
event
low 1F
measured anthe
of aneventCPICH
result
active
absolute 1F Ec/No
the
triggered
set active
cell
CPICH
measurement
if theRSCP
set
measurement
CPICHcell becomes
is Ec/No
enabled,
result
report of
the
an
better
toRNC active
the than (10), 320 ms (11), 640 ms (12), 1280 ms (13), 2560 ms (14),
set
or
If cell
equal
the becomes
to the
inter-frequency worse
threshold than or
HHoEcNoCancel equal to an andabsolute
theof UE CPICH
RNC when
measurement
starts
Ec/No the theresult
CPICH
inter-frequency
threshold. oforEc/No
inter-RAT
the oractive
GSMmeasurement(GSM)
set handover
cell becomes
measurement result inthe
caused
an active
better thanby 0 ms (0),
5000 10 ms (1), 20 ms (2), 40 ms (3), 60 ms (4), 80 ms
ms (15) 1280 ms
transmits
low
set
or measured
cell
equal the
becomes
to the corresponding
absolute
worse
threshold CPICH
than event
the
HHoEcNoCancel RSCP 1E
threshold triggered
is enabled,
and Measurement
the UE RNC (5), 100 ms (6), 120 ms (7), 160 ms (8), 200 ms (9), 240 ms
In the
compressedCELL_DCH mode state the UE physical layer measurement Filtering period of 200 ms (0), Filtering period approximates 0
Report
starts the to the
HHoEcNoThreshold.
transmits the RNC.when all
inter-frequency
corresponding or active
GSM
event
set cells
measurement
1E triggered
have triggered
in
Measurement
the (10), 320(1),
msFiltering
(11), 640 ms (12), 1280 ms (13), 2560 ms (14),
period
reporting
The
If the for
parameter intra-frequency
event
inter-frequency 1F for CPICH
HHoEcNoThreshold
or CPICH
inter-RAT RSCP. RSCP
(GSM) The measurements
determines RNC
handover cancels
the caused is by
the
absolute 300 ms
-115...-25 period
dBm, step 1 dBm approximates 400 ms (2),
compressed mode when all active set cells have triggered -105 dBm (IFHO -100 dBm)
Report
200lowms.
event
CPICH
a 1F toThe
Ec/No
measured
thean
of RNC.
Filter
active
threshold
CPICHCoefficient
set ifparameter
cell,started
which
RSCP isthe
is used CPICH
enabled, controls
RSCP
byinter-frequency
thethe UE UE the
to higherthe
trigger
transmits the
5000 msperiod
Filtering (15) approximates 600 ms (3), Filtering period
Note
reporting
The that
parameter once
event the
1F RNC
for CPICHhas
HHoEcNoTimeHysteresis RSCP. the
The RNC
determines cancels ortime
thethe
layer
an filtering
measurement
reporting
event event
1F ofresult
physical
1F.
triggered ofset
When the layeractive
the
measurement CPICH
measured set RSCP
cell
report becomes
CPICH to measurements
the Ec/No
RNC better of
whenthan
all approximates 800 ms (4), Filtering period approximates 1100
inter-RAT
event
period
The 1Fduring
parameter (GSM)
of an active
which measurement
the CPICH
HHoEcNoCancelTime cell, if for
the
Ec/No the
CPICH purpose
of the
determines RSCPactiveof hardsettimecell
before
or
must
equal
active
the CPICH
handover
measurement
stay
the
set todueevent
the
cells
RSCP
worse tohas
result
evaluation
threshold
low become
measurement
than measured
of the
the
and
HHoRscpCancel
worse
active
threshold
measurement
than
result
absolute
set cell anand
oforCPICH
equal
becomes
HHoEcNoThreshold
the
active tothe
reporting
Ec/No,UEthe cell
set
better
is
the
than
ms (5), Filtering period approximates 1600 ms (6)
period
performed
transmits duringtheby which
the UE.
corresponding the TheCPICH CPICHevent Ec/NoRSCP of the active
measurement set cell
threshold
becomes
RNC
or equal
before doestheto inUE
worse question,
not
the breakthan
threshold
can orthe
off
trigger the RNC
equal
the ongoing
HHoRscpCancel an1E
tostarts
reporting
triggered
inter-frequency
absolute
measurement,
event and CPICH
1F.
measurement
the When UE or the
RSCP
even inter-
if
must
reports
report
RAT stay
to
(GSM) canthebetter
be
RNC. usedthantothe
measurements threshold
trigger in compressed HHoEcNoCancel
off inter-frequency mode or
for before
inter-RAT
the
threshold.
one or
transmits
measured more the active
CPICH corresponding set reporting
Ec/No cellsofthe trigger
event
all active the
1E reporting
triggered
set cells has event
measurement
become 1E for
the
(GSM) UE
purpose can
of trigger
measurements
hard the
handover. for purposeevent 1E.
of hard handover.
CPICH
report
worse to Ec/No.
the
thanonce RNC.
the threshold in question, the inter-frequency
RNC starts inter-
Note,
The that
parameter the RNC has
HHoRscpThreshold starteddeterminesthe the absolute or
frequency
inter-RAT (GSM) measurement for the purposein
Note
The that
higher or
once inter-RAT
layer the RNC
filtering (GSM)
has
is measurements
started
described thein inter-frequency
3GPP TSofcompressed
hard or
25.331
If the inter-frequency or inter-RAT (GSM) handover caused by 0 ms (0), 10 ms (1), 20 ms (2), 40 ms (3), 60 ms (4), 80 ms 100 ms (6)
low
The measured
parameterCPICH
indicatesRSCP is enabled,
whether the IMSIthe UE transmits
based intra- an (5),
Not 100 ms (6),
allowed (0), 120 ms (7),
Allowed (1) 160 ms (8), 200 ms (9), 240 ms Not allowed (0)
event 1F
frequency triggered
handover measurement
is allowed in report to the RNC
the cell. number when
The alternative the (10), 320 ms (11), 640 ms (12), 1280 ms (13), 2560 ms (14),
This
CPICH parameter
RSCP determines
measurement the maximum
result of an active setofcell
cells 2...3, step
5000 1
ms (15) 3
values
which of
can the parameter
participate in are
a the following:
soft/softer handover.
becomes worse than the threshold HHoRscpThreshold.
When the number of cells in the active set has reached the No periodical reporting (0), 0.25 s. Not allowed (1), 0.5 s (2), 1 s (3)
maximum,
0: IMSIthe based andintra-frequency
a monitored incell becomes
handover isbetter
not than anthe 1
0 sms
(3), 2 10
s (4),
ms4(1),
s (5),
20 8ms
s (6),
(2), 16
40 sms
(7)(3), 60 ms (4), 80 ms
When
Reporting
The
active parameter
set
number
deactivation
cell,
of cells
threshold
HHoRscpTimeHysteresis
the UE transmits
the
a
active set
indicates
Measurement the allowed.
has reached
maximum
determines Reportthetotimethe
(0), 640 ms (12)
1: IMSI
maximum,
number based
of number
cells intra-frequency
andwhichaallowed
monitored in cell
the handover
enters
active set is
the
in allowed.
reporting
order range
forset
the event (5), 100dB,
msstep
(6), 0.5
120dB
ms (7), 160 ms (8), 200 ms (9), 240 ms
periodinthe
When
RNC during
order to ofthe
replacecellsCPICH
the in the
activeRSCP
active
cell of
set
withthe
has
theactive
reached
monitored cell
thecell 0...7.5 2 dB
(replacement
1A to stay
trigger. window), thethreshold
monitored cell must continuously (10), 320 ms (11), 640 ms (12), 1280 ms (13), 2560 ms (14),
must
maximum
(event
stay 1C).worse
within If The
specified
the the RNC
than
RNC
reporting
bythecalculates
the
is notparameter
range able
for
the
to
a
deactivation
HHoRscpThreshold
MaxActiveSetSize
replace
given the active
period of
threshold
timecell
and
5000 ms (15)
from
before
a the
monitored
with the theparameter
UE can
cell becomes
monitored MaxActiveSetSize:
trigger
cell, the the
better
UE reporting event
than an active
continues 1F.
reporting When
set after
cell, the
the
the
before
The
measured
UE the CPICH
parameter
transmits UEacan sendthe
defines
RSCP
Measurement aofMeasurement
origin
allReportof the
active set
to Report
last
the toinbecome
the
configuration
cells
RNChas orderRNC to in Not defined (0), Network originated configuration action (1), Not applicable
initial
order report
to replaceby reverting
an active tosetperiodical
cell with measurement
the monitored reporting.
cell
Reporting
action
worse
replace
The parameter Deactivation
affecting
than
the theactive thecell
threshold
Replacement Threshold
object.
withinthe question, = MaxActiveSetSize
monitored theInterval
RNC starts
cell (event - 1
inter-
1C). NetAct RNW plan originated configuration action (2),
(event
frequency 1C).orThe length of
inter-RAT this Reporting
(GSM) period is controlled
measurements in
determines
by the
compressed Element Manager originated configuration action (3),
the interval
parameter of periodical
Replacement measurement
Time.Window reports when such
Reporting
mode
The parameter
reporting isDeactivation
for the purpose ofThreshold
Replacement
triggered by hard
the parameter
handover.
event 1C. determines is part theofmargin
System Configuration action by automatic tuning function (4),
Information Block 11/12.
by which the CPICH Ec/No measurement result of the Element Manager originated mass config action (5), NetAct
monitored cell (MNew) must exceed the CPICH Ec/No originated direct RNW change (6)
Replacement
measurement activation result of the threshold
an active information elementbefore
set cell (MInAS)
indicates the minimum number
the UE can send the event 1C triggered Measurement of cells allowed in the active
Report
set in order
to the RNC: for the event 1C to trigger. The threshold equals
to the maximum size of the active set which is controlled with
the parameter
MNew >= MInAs MaxActiveSetSize.
+ ReplacementWindow / 2
Replacement Activation Threshold parameter is part of
System Information Block 11/12.
Nokia Value
R99 DPCH HSDPA FMCS set 4 (MACRO Real Time FMCS set 5 ( MACRO Non Real
F1) Time F1)
0 0 0 0
0.5 s 0.5 s 0.5 s 0.5 s
100 ms 100 ms 320 ms 320 ms
4 dB 0 dB 4 dB 2 dB
DSR is not allowed (0) DSR is not allowed (0) DSR is not allowed (0) DSR is not allowed (0)
0.5 s (2) 0.5 s (2) 0.5 s (2) 0.5 s (2)
640 ms 1280 ms 640 ms 640 ms
6 dB 6 dB 6 dB 4 dB
0 dB 0 dB 0 dB 0 dB
2 dB 2 dB 2 dB 2 dB
3 3 3 3
Not applicable Not applicable 4 5
-9dB -9dB -11 dB -12 dB
1280 ms 1280 ms 320 ms 640 ms
-12dB -15 dB -13 dB -15 dB
100 ms 100 ms 1280 ms 2560 ms
ISHO -102 dBm, IFHO -97 dBm ISHO -102 dBm, IFHO -97 dBm -105 dBm -109 dBm
1280 ms 1280 ms 1280 ms 640 ms
0 0 0 0
-105 dBm (IFHO -100 dBm) -105 dBm (IFHO -100 dBm) -108 dBm -112 dBm
100 ms 100 ms 640 ms 2560 ms
Not allowed (0) Not allowed (0) Not allowed (0) Not allowed (0)
3 3 3 3
0.5 s 0.5 s 0.5 s 0.5 s
100 ms 100 ms 320 ms 320 ms
2 dB 2 dB 2 dB 2 dB

FMCS set 6 (MACRO Fast HO, Real FMCS set 7 (MACRO Real FMCS set 8 (MACRO on Real FMCS set 9 ( MICRO Real Time
Time) Time F2) Time F2) F1)
0 0 0 0
0.5 s 0.5 s 0.5 s 0.5 s
320 ms 320 ms 320 ms 320 ms
4 dB 4 dB 2 dB 4 dB
0.5 s (2) 0.5 s (2) 0.5 s (2) 0.5 s (2)
640 ms 640 ms 640 ms 640 ms
6 dB 6 dB 4 dB 6 dB
0 dB 0 dB 0 dB 0 dB
2 dB 2 dB 2 dB 2 dB
3 3 3 3
6 7 8 9
-9 dB -11 dB -12 dB -11 dB
640 ms 320 ms 640 ms 320 ms
-11 dB -13 dB -15 dB -13 dB
640 ms 1280 ms 2560 ms 1280 ms
-104 dBm -1045 dBm -107 dBm -107 dBm
640 ms 1280 ms 640 ms 1280 ms
0 0 0 0
-107 dBm -108 dBm -110 dBm -110 dBm
640 ms 640 ms 2560 ms 640 ms
3 3 3 3
0.5 s 0.5 s 0.5 s 0.5 s
320 ms 320 ms 320 ms 320 ms
2 dB 2 dB 2 dB 2 dB

FMCS set 10 ( MICRO Non Real FMCS set 11 ( MACRO Real Time FMCS set 12 ( MACRO Non Real FMCS set 14 (TWO Carrier
Time F1) F3) Time F3) MICRO , Real Time F2 )
0 0 0 0
0.5 s 0.5 s 0.5 s 0.5 s
320 ms 320 ms 320 ms 320 ms
2 dB 4 dB 2 dB 4 dB
0.5 s (2) 0.5 s (2) 0.5 s (2) 0.5 s (2)
640 ms 640 ms 640 ms 640 ms
4 dB 6 dB 4 dB 6 dB
0 dB 0 dB 0 dB 0 dB
2 dB 2 dB 2 dB 2 dB
3 3 3 3
10 11 12 14
-12 dB -11 dB -12 dB -11 dB
640 ms 320 ms 640 ms 320 ms
-15 dB -13 dB -15 dB -13 dB
2560 ms 1280 ms 2560 ms 640 ms
-109 dBm -103 dBm -107 dBm -97 dBm
640 ms 1280 ms 640 ms 1280 ms
0 0 0 0
-112 dBm -106 dBm -110 dBm -100 dBm
2560 ms 640 ms 2560 ms 640 ms
3 3 3 3
0.5 s 0.5 s 0.5 s 0.5 s
320 ms 320 ms 320 ms 320 ms
2 dB 2 dB 2 dB 2 dB

FMCS set 15 (TWO Carrier FMCS set 20 (MACRO HSDPA, FMCS set 21 (MACRO HSDPA, F2) FMCS set 22 (MACRO HSDPA, F3)
MICRO Non Real Time F2) F1)
0 0 0 0
0.5 s 0.5 s 0.5 s 0.5 s
320 ms 320 ms 320 ms 320 ms
2 dB 2 dB 2 dB 2 dB
0.5 s (2) 0.5 s (2) 0.5 s (2) 0.5 s (2)
640 ms 640 ms 640 ms 640 ms
4 dB 4 dB 4 dB 4 dB
0 dB 0 dB 0 dB 0 dB
2 dB 2 dB 2 dB 2 dB
3 3 3 3
15 20 21 22
-12 dB -12 dB -12 dB -12 dB
640 ms 640 ms 640 ms 640 ms
-15 dB -15 dB -15 dB -15 dB
2560 ms 2560 ms 2560 ms 2560 ms
-107 dBm -109 dBm -107 dBm -107 dBm
640 ms 640 ms 640 ms 640 ms
0 0 0 0
-110 dBm -112 dBm -110 dBm -110 dBm
2560 ms 2560 ms 2560 ms 2560 ms
3 3 3 3
0.5 s 0.5 s 0.5 s 0.5 s
320 ms 320 ms 320 ms 320 ms
2 dB 2 dB 2 dB 2 dB

O2 UK Value
FMCS set 25 (MICRO HSDPA, F1) FMCS set 26 (TWO carrier MICRO FMCS set 27 ( MICRO Real Time FMCS set 28 (TWO Carrier
HSDPA, F2) with HSDPA, F1) Multi- MICRO , Real Time with
RAB HSDPA, F2 ) Multi-RAB
0 0 0 0
0.5 s 0.5 s 0.5 s 0.5 s
320 ms 320 ms 320 ms 320 ms
2 dB 2 dB 4 dB 4 dB
0.5 s (2) 0.5 s (2) 0.5 s (2) 0.5 s (2)
640 ms 640 ms 640 ms 640 ms
4 dB 4 dB 6 dB 6 dB
0 dB 0 dB 0 dB 0 dB
2 dB 2 dB 2 dB 2 dB
3 3 3 3
25 26 27 28
-12 dB -12 dB -11 dB -11 dB
640 ms 640 ms 320 ms 320 ms
-15 dB -15 dB -13 dB -13 dB
2560 ms 2560 ms 1280 ms 1280 ms
-109 dBm -107 dBm -107 dBm -97 dBm
640 ms 640 ms 1280 ms 1280 ms
0 0 0 0
-112 dBm -110 dBm -110 dBm -100 dBm
2560 ms 2560 ms 640 ms 640 ms
3 3 3 3
0.5 s 0.5 s 0.5 s 0.5 s
320 ms 320 ms 320 ms 320 ms
2 dB 2 dB 2 dB 2 dB

FMCS set 29 ( MACRO Real Time FMCS set 30 (MACRO, FMCS set 31 (MACRO, FMCS set 32 (MACRO,
with HSDPA, F3) Multi-RAB HSPA=HSDPA+HSUPA, F1) HSPA=HSDPA+HSUPA, F2) HSPA=HSDPA+HSUPA, F3)
0 0 0 0
0.5 s 0.5 s 0.5 s 0.5 s
320 ms 320 ms 320 ms 320 ms
4 dB 4 dB 4 dB 4 dB
0.5 s (2) 0.5 s (2) 0.5 s (2) 0.5 s (2)
640 ms 640 ms 640 ms 640 ms
6 dB 6 dB 6 dB 6 dB
0 dB 0 dB 0 dB 0 dB
2 dB 2 dB 2 dB 2 dB
3 3 3 3
29 30 31 32
-11 dB -12 dB -12 dB -12 dB
320 ms 640 ms 640 ms 640 ms
-13 dB -15 dB -15 dB -15 dB
1280 ms 2560 ms 2560 ms 2560 ms
-103 dBm -109 dBm -107 dBm -107 dBm
1280 ms 640 ms 640 ms 640 ms
0 0 0 0
-106 dBm -112 dBm -110 dBm -110 dBm
640 ms 2560 ms 2560 ms 2560 ms
3 3 3 3
0.5 s 0.5 s 0.5 s 0.5 s
320 ms 320 ms 320 ms 320 ms
2 dB 2 dB 2 dB 2 dB

FMCS set 33 (MACRO Real Time FMCS set 34 FMCS set 35 FMCS set 36 (MACRO Real
with HSPA, F1) Multi-RAB SPECIAL EVENT (F1 or F2) SPECIAL EVENT (F1 or F2) Time with HSPA, F2) Multi-
RAB
0 0 0 0
0.5 s 0.5 s 0.5 s 0.5 s
320 ms 640 ms 640 ms 320 ms
4 dB 2 dB 2 dB 4 dB
0.5 s (2) 0.5 s 0.5 s 0.5 s (2)
640 ms 1280 ms 1280 ms 640 ms
6 dB 4 dB 4 dB 6 dB
0 dB 0 dB 0 dB 0 dB
2 dB 2 dB 2 dB 2 dB
3 3 3 3
33 34 35 36
-11 dB -11 dB -12 dB -11 dB
320 ms 320 ms 320 ms 320 ms
-13 dB -13 dB -15 dB -13 dB
1280 ms 1280 ms 2560 ms 1280 ms
-105 dBm -110 dBm -110 dBm -105 dBm
1280 ms 1280 ms 1280 ms 1280 ms
0 200 ms 200 ms 0
-108 dBm -113 dBm -115 dBm -108 dBm
640 ms 1280 ms 2560 ms 640 ms
3 3 2 3
0.5 s 0.5 s 0.5 s 0.5 s
320 ms 1280 ms 1280 ms 320 ms
2 dB 2 dB 2 dB 2 dB

FMCS set 37 (MICRO, FMCS set 44 ( MICRO Real Time FMCS set 45 (TWO Carrier FMCS set 46 (TWO carrier
HSPA=HSDPA+HSUPA, F1) with HSPA, F1) Multi- MICRO , Real Time with HSPA, MICRO, HSPA=HSDPA+HSUPA,
RAB F2 ) Multi-RAB F2)
0 0 0 0
0.5 s 0.5 s 0.5 s 0.5 s
320 ms 320 ms 320 ms 320 ms
4 dB 4 dB 4 dB 4 dB
0.5 s (2) 0.5 s (2) 0.5 s (2) 0.5 s (2)
640 ms 640 ms 640 ms 640 ms
6 dB 6 dB 6 dB 6 dB
0 dB 0 dB 0 dB 0 dB
2 dB 2 dB 2 dB 2 dB
3 3 3 3
37 44 45 46
-12 dB -11 dB -11 dB -12 dB
640 ms 320 ms 320 ms 640 ms
-15 dB -13 dB -13 dB -15 dB
2560 ms 1280 ms 1280 ms 2560 ms
-109 dBm -107 dBm -97 dBm -107 dBm
640 ms 1280 ms 1280 ms 640 ms
0 0 0 0
-112 dBm -110 dBm -100 dBm -110 dBm
2560 ms 640 ms 640 ms 2560 ms
3 3 3 3
0.5 s 0.5 s 0.5 s 0.5 s
320 ms 320 ms 320 ms 320 ms
2 dB 2 dB 2 dB 2 dB

FMCS set 47 ( MACRO Real FMCS set 81 ( RT F1 & F2 for FMCS set 82 ( RT F3 for
Time with HSPA, F3) Multi- MOTORWAY) MOTORWAY)
RAB
0 0 0
0.5 s 0.5 s 0.5 s
320 ms 320 ms 320 ms
4 dB 6 dB 6 dB
DSR is not allowed (0) DSR is not allowed (0) DSR is not allowed (0)
0.5 s (2) 0.5 s (2) 0.5 s (2)
640 ms 640 ms 640 ms
6 dB 7 dB 7 dB
0 dB 0 dB 0 dB
2 dB 2 dB 2 dB
3 1 1
47 81 82
-11 dB -9 dB -9 dB
320 ms 320 ms 320 ms
-13 dB -11 dB -11 dB
1280 ms 320 ms 320 ms
-103 dBm -101 dBm -99 dBm
1280 ms 1280 ms 1280 ms
0 0 0
-106 dBm -104 dBm -102 dBm
640 ms 640 ms 640 ms
Not allowed (0) Not allowed (0) Not allowed (0)
3 3 3
0.5 s 0.5 s 0.5 s
320 ms 320 ms 320 ms
2 dB 2 dB 2 dB

Comments Classification IPD PTY ID Discrepancy - Criticality

Amended Sept 2009 following Optimisation and E2E NWP 11059 Extended Discrepancy
re-design
Amended work
Sept 2009 following Optimisation and E2E NWP 11013 Extended Discrepancy
re-design work 12244
NWP Extended Discrepancy
Value aligned with network setting Jan 2010 NWP 12306 Extended Discrepancy
FMCS set 20: Changed to 640 ms Nov 2007 to NWP 10995 Extended Discrepancy
support
Amended HSDPA Rollout
Sept 2009 following Optimisation and E2E NWP 10992 Extended Discrepancy
re-design work 38039
NWP
NWP 38040
FMCS 34 changed as per issued change request NWP 11045 Extended Discrepancy
form
FMCS set 4: Changed to 320 ms (from 1280 ms) in 11003
Aug
FMCS 2006
34 following
changed ISHO
as pertrial. Seechange
issued UKRE_06_037
request 11040
form 11012
FMCS set 6: Changed to -104 dBm (from -104dBm) NWP 11031 Extended Discrepancy
in Mar2008
FMCS following
34 changed asRSCP trial. See
per issued UKRE_07_064
change request 11054
FMCS set 6: Changed to -107 dBm (from -110dBm) NWP 11022 Extended Discrepancy
in Mar2008 following RSCP trial. See UKRE_07_064
NWP
New in RU20 New in RU20 on TOP New in RU30 New in RU40
Frequency
Weekly
Weekly
Weekly
Weekly
Monthly
Monthly
Weekly
Weekly
Weekly
Weekly
Weekly
Weekly
Weekly
Weekly
Weekly
Weekly
Weekly
Weekly
Weekly
Weekly
Weekly
Weekly
Weekly
Weekly
Weekly
Weekly

New in RU50 EP1
5.13
9.00
4.50
9.00
9.00
9.00
9.00
9.00
8.13
5.60
8.13
9.00
9.00
9.00
HOPG Parameters

AdjgAbsPrioCellReselec Absolute priority for GSM cell reselection
AdjgHCSpriority Cell Re-selection HCS Priority
AdjgHCSthreshold Cell Re-selection HCS Threshold
AdjgMinRxLevNCHO Minimum RX level for non-critical HO
AdjgPenaltyTime Cell Re-selection Penalty Time
AdjgPenaltyTimeNCHO Penalty time for GSM cell in non-critical HO
AdjgPriorityCoverage Ncell Priority for Coverage HO
AdjgPrioritySLHO Neighbour cell priority for SLHO
AdjgQoffset1 Cell Re-selection Quality Offset 1
AdjgQrxlevMin Cell Re-selection Minimum RX Level
AdjgRxLevMinHO Minimum RX Level for Coverage HO
AdjgTempOffset1 Cell Re-selection Temporary Offset 1
AdjgThreshigh Threshold high for GSM cell reselection
AdjgThreslow Threshold low for GSM cell reselection
HOPGId HOPG Identifier
O&M Parameters
HOPGChangeOrigin HOPGChangeOrigin
HOPG HC
HOPG HC
HOPG HC
HOPG HC
HOPG HC
HOPG HC
HOPG HC
HOPG HC
HOPG HC
HOPG HC
HOPG HC
HOPG HC
HOPG HC
HOPG HC
HOPG Identification
HOPG O&M
Description
The parameter defines the absolute priority level of the GSM cell
group
Defines in the
the priority
absolute levelpriority
of the based
GSMcell reselection
neighbour procedure.
cell in the 0
indicates
hierarchical the lowest
cell re-selectionabsolute priority
procedure. and 7 indicates
0 indicates the
theRSSI highest
lowest
Defines
absolute the threshold
priority. which must be exceeded by the
HCS priority
measurement and result 7 indicates
of the GSM the highest
neighbour HCS priority.
cell before Lower
the HCS
The parameter
priority values determines
are meant forthe minimum
larger macro required
cells and GSM
higher RSSIHCS level
hierarchical
The
that priority
the averagecellisre-selection
IE broadcasted
RSSI value becomes
per
of the GSM
GSM possible.
cell group
neighbour (BCCH
cell ARFCN
must
priority
Determines values are
the time meantperiod for smaller
during which pico/micro
the prioritycells.
Temporary Offset
+ Band Indicator)
exceed before thein SIB
non-critical19 message.
handover Thus,
to GSM should
is possible. be 1 is
applied
defined in
so the
that cell
the re-selection
same priorityprocedure
value
This parameter defines the penalty time for a GSM neighbour cell is for
given the GSM
for each neighbour
GSM
cell in
neighbor question.
within the same frequency. If
ofmore than one value
that
If
has
"Non-critical
there
rejected
handovers"
arehighest
several
a resource
GSM are,
request
for example,
neighbor
a handover
cells that service
meet and
the UE is
attempt.
required
When
radio
given,
the the priority is broadcasted
capability type handovers. Service and load based handover are
penalty time is running, non-critical in
handoverSIB 19 message.
procedures
If
notthere
make started
useareoftoseveral GSM neighbour cells that meet the required
thisparameter.
this cell.
The
radio parameter
link
priority properties
must determines
be for the
defined the minimum
service-
so that or required
load-reason
priorities for RSSI
handover
different level, which the measurement result of the GSM neighbor cell must ex
radioat
This parameter is used in the cell re-selection and ranking
the same
access
"Non-critical
between time,
technologies
WCDMA the
handovers" RNC (WCDMA,
and GSM ranks
are,cells.the
LTE, potential
for example, GSM)
The value target
are
service alwayscells
of thisand according
different.
UE
parameter is
The
to parameter
priority
capability levels
type also
and defines the
selectsServicetheGSMvalue
highest for QrxlevminGSM
ranked GSM IE used for GSM absolute priority based cell reselection.
neighbour
subtracted fromhandovers.
the measured and load
carrier based
RSSI ofhandover
the
cell
The
make
This to be the
default
use
parameter
neighbouring target
ofvalue
this
cell cell.means
'255'
parameter.
determines
before The
thethe priority
UE that
minimum levelpriority
GSM
compares ofthea GSM
required is GSM
quality neighbour
not RSSI cell
defined.
measure
in
The service
level
with user
which
the and
mustthe load
define
averaged handover
cell re-selection/ranking the RSSI is
priority controlled
for
value each
of
criteria. theby
GSM GSMthe parameter
neighbor
neighbour if WCEL-
cell
This parameter
AdjgPrioritySLHO.
GSMCellReselection is used
The in
is rangethe cell
'Enabled' of the ranking
in parameter
the between
cell. varies
Ifreason
priority GSMfrom andzerototo
information
must
WCDMA exceed cells before
when the
the coverage
GSM (or
neighbour quality)
cell has the handover
same
7.
is
The
GSM Zero
provided is
parameter
islevel theforlowest
possible. any
defines GSM and the 7 the
layer,
Srxlevhighest
cells priority
belonging
(GSM RSSI) level.
to GSM
based layerHCS
threshold for
priority
whichby
used nothe as
priority
UE the
for serving
is assigned,
cell cell.
are not
reselection considered
toward a higher forabsolute
reselection.
The parameter defines the Srxlev (GSM RSSI) based threshold
priority
used GSM layer forwhen absolute priorities aare applied. A
If the by
thresholdGSM theneighbour
is
UE
defined
cellcell
for
reselection
each hasGSM towardHCS
a different
cell group.
lower absolute
priority level, priority
the
GSM
offset layer
valuewhen is applied absolute for thepriorities
HCS cell arere-selection
applied. A threshold between is GSM
This
defined parameter
and WCDMA for each identifies
cells. GSM Thecell the HOPG
group.
offset (object (during
is subtracted for inter-system
Penalty Time)
Handover
from the measured Path) uniquely RSSI level withinofRNC. the GSM neighbour cell.
The parameter defines the origin of the last configuration action
The alternative values are the following: 3 dB, 6 dB, 9 dB, 12 dB,
15 dB, 18 dB, 21 dB and 'Infinity'.
0...7, step 1, Priority not defined (255) 255

0...7, step 1 0
-110...-37 dBm, step 1 dBm -110 dBm
-110...-47 dBm, step 1 dBm -95 dBm
0...60 s, step 10 s 0s
0...60 s, step 1 s 10 s
0...7, step 1 0
0...7, step 1 0
-50...50 dB, step 1 dB 0 dB
-115...-25 dBm, step 2 dBm -101 dBm
-110...-47
3 dB (0), 6dBm, step
dB (1), 1 dBm
9 dB (2), 12 dB (3), 15 dB -95 dBm
(4), 18 dB (5), 21 dB (6), 100 dB. Infinity (7) 3 dB
0...62 dB, step 2 dB 0 dB

Nokia Value
HOPG set 1 (MACRO RT & NRT, F1)
255 255
0 0
-110 dBm -110 dBm
-95 dBm -95 dBm
0s 0s
10 s 10 s
0 0
0
GSM1800 8 dB, GSM900 18 dB, border 10 0
dB 5 dB
-101 dBm -105 dBm
-95 dBm -100 dBm
3 dB 3 dB
0 dB 0 dB
0 dB 0 dB
Not applicable 1

O2 UK Value
HOPG set 7 (MACRO RT & NRT, F2) HOPG set 8 (MICRO RT & NRT, F1)
255 255
0 0
-110 dBm -110 dBm
-95 dBm -95 dBm
0s 0s
10 s 10 s
0 0
0 0
5 dB 5 dB
-105 dBm -105 dBm
-100 dBm -100 dBm
3 dB 3 dB
0 dB 0 dB
0 dB 0 dB
7 8

lue
HOPG set 9 (TWO carrier MICRO RT & HOPG set 10 (MACRO RT & NRT, F3)
NRT, F2)
255 255
0 0
-110 dBm -110 dBm
-95 dBm -95 dBm
0s 0s
10 s 10 s
0 0
0 0
5 dB 5 dB
-105 dBm -105 dBm
-100 dBm -100 dBm
3 dB 3 dB
0 dB 0 dB
0 dB 0 dB
9 10

Changed following trials in Nov/Dec 2006

Set accordingly to O2 GSM coverage design
Set accordingly to O2 GSM coverage design
NWP
NWP
NWP
NWP
NWP
Frequency
Weekly
Weekly
Weekly
Weekly
Weekly
Weekly
Weekly
Weekly
Weekly
Weekly
Weekly

New In RU50 EP1
New In RU50 EP1

New In RU50 EP1
9.00
9.00
9.00
8.13
9.00
9.00
HOPI Parameters
Full Name

AdjiAbsPrioCellReselec Absolute priority for inter-frequency cell reselection
AdjiEcNoMargin CPICH Ec/No Margin for IFHO
AdjiMinEcNo Minimum CPICH Ec/No for IFHO
AdjiMinEcNoNCHO Minimum CPICH Ec/No for non-critical IFHO
AdjiMinRSCP Minimum CPICH RSCP for IFHO
AdjiMinRscpNCHO Minimum CPICH RSCP for non-critical IFHO
AdjiPenaltyTimeNCHO Penalty time for WCDMA cell in non-critical HO
AdjiPlossMargin Pathloss Margin for IFHO
AdjiPriorityCoverage Ncell Priority for Coverage IFHO
AdjiPriorityDCellCAHO Neighbour cell priority for DC HSDPA Capa Based HO
AdjiPriorityHSCAHO Neighbour Cell Priority for HSPA Capability Based HO
AdjiPriorityMIMOCAHO Neighbour cell priority for MIMO Capa Based HO
AdjiPriorityQuality Ncell Priority for Quality IFHO
AdjiPriorityReDir Neighbour cell priority for RRC Connection Redirection
AdjiPrioritySLHO Neighbour cell priority for service and load IFHO
AdjiQqualMin Cell Re-selection Minimum Quality
AdjiQqualminFDD QqualminFDD for inter-frequency cell reselection
AdjiQrxlevminFDD QrxlevminFDD for inter-frequency cell reselection
AdjiThreshigh Threshold high for inter-frequency cell reselection
AdjiThreslow Threshold low for inter-frequency cell reselection
BlindHORSCPThr Blind HO RSCP threshold
AdjiHCSpriority Cell Re-selection HCS Priority
AdjiHCSthreshold Cell Re-selection HCS Threshold
AdjiQrxlevMin Cell Re-selection Minimum RX Level
AdjiPenaltyTime Cell Re-selection Penalty Time
AdjiQoffset1 Cell Re-selection Quality Offset 1
AdjiQoffset2 Cell Re-selection Quality Offset 2
AdjiTempOffset1 Cell Re-selection Temporary Offset 1
AdjiTempOffset2 Cell Re-selection Temporary Offset 2
HOPIId HOPI Identifier
O&M Parameters
HOPIChangeOrigin Change origin
HOPI HC
HOPI HC
HOPI HC
HOPI HC
HOPI HC
HOPI HC
HOPI HC
HOPI HC
HOPI HC
HOPI HC
HOPI HC
HOPI HC
HOPI HC
HOPI HC
HOPI HC
HOPI HC
HOPI HC
HOPI HC
HOPI HC
HOPI HC
HOPI HC
HOPI SI
HOPI SI
HOPI SI
HOPI SI
HOPI SI
HOPI SI
HOPI SI
HOPI SI
HOPI Identification
HOPI O&M
Description
The parameter defines the absolute priority level of the WCDMA
(UTRA) neighbor frequency in the absolute priority based cell
reselection procedure. 0 indicates the lowest absolute priority and
7 indicates the highest absolute priority.
This parameter
The priority IE isdetermines
broadcasted theper margin UARFCN by which in thethe SIB averaged
19
CPICH
message. Ec/No Thus, measurement
priority should result of the best
be defined so that inter-frequency
the same
The
priorityparameter
neighbour value cellismust determines
given exceed
for each the minimum
averagedlevel
theinter-frequency CPICH required
WCDMA Ec/Noof CPICH
neighbor
This
Ec/No parameter
thatUARFCN.
the result determines
average the
measurement minimum result required theCPICH
ofbefore best Ec/No
inter-
measurement
within
level the
which the averaged of
If the
more bestthan
measurement active
one set
value cell
result is given,
of the the
best quality
highest
inter-
frequency
reason
priority is neighbour cell
inter-frequency
broadcasted in must19exceed
handover
SIB before the non-critical
is possible.
message.
frequency
The
reason parameter neighbour
inter-frequency determines cell must
handover the exceed
minimum
is before
possible. level the coverage
required of CPICH
This
This parameter
parameter controls
determines the measurement
the minimum order
required toCPICH
be followed RSCP
reason
This
RSCP inter-frequency
parameter
that the defines
averaged handover
the penalty
measurement is time
possible. for
result a WCDMA
of the best neighbour
when
The
level there
priority
which is
must
the more be
averaged than
defined one sofrequency
measurement that to
priorities be
result measured
for
of different
the best ininter-
case of
radio
inter-
cell that has
frequency
"Non-critical
DC HSDPA rejected
neighbour
handovers"
Capability aBased
cell resource
mustfor
are, request
exceed
example,
Handover. ofservice
before a hard
the handover
non-critical
and UE
access
frequency technologies
neighbour (WCDMA,
cell must LTE, GSM) are always different.
attempt.
reason
capability When
inter-frequency the penalty
type handovers. handover timeexceed isisrunning, before
possible. the quality
non-critical reason
handover
The
This inter-frequency
parameter
inter-frequency
procedures are controls
handover
not
measurement
started the isService
tomeasurement
possible.
this
and
procedure
cell.
loadorder based
measures
to be handover one
followed
make
The
frequency
when use of
parameter
there atisthis
amoretime.parameter.
determinesmeasurement
If there
than onethe isfrequency
more
margin procedure
than bytoonewhich
be will
carriermeasure
the
measured frequency
averaged one toof
in case
This parameter
"Non-critical controls
handovers" the
are,measurement
for example, order
service to be
and followed
UE
frequency
be
MIMO
when measured,
propagation at
Capability
there is a
loss time.
the
more ofRNC
Based If
the
than there
selects
best
Handover.
one is more
activea
frequency than
subset
set cellofone
must
toservice
bebasedcarrier
inter-frequency
exceed
measured frequency
the
in casetoof
Non-critical
capability
be measured,
neighbour
averaged typehandovers
cells
propagationhandovers.
the RNC
(having are,
selects
the
loss for
Service
same
of example,
thea andinter-frequency
subset
UTRA
best load
of
RF and
inter-frequency
channel UE
handover
number) capability
neighbour
HSPA
type
make capability
handovers.
use of this based
Service
parameter. handover.
and load based handover, HSPA is that
neighbor
which
cell
The arecells
before measured
the
inter-frequency (having
coverage thereason
first.
measurement same UTRA RF
inter-frequency
procedure channelwillhandover number)
measure
The
are RRC Connection
Capability
measured Based first. Handover Redirection and feature
Multi-Band selects
Load the targetone
Balancing
possible.
frequency
The at
inter-frequency a time. If there
measurement is more than
procedure one carrier
will measure frequency one cellto
frequency
Handovers
The
In for
inter-frequency
case of a make redirection
coverage use of
measurement
reason from
this the
parameter.
handover, 3G inter-frequency
procedure the measures one
measurement neighbor order is
be
list measured,
frequency
if the
frequency at
target
at a the
athe time.
system
time. RNC If
Ifand selects
there
is 3G.
there is
isThis a
more
more subset
than
parameter of
thanhighest oneinter-frequency
carrier
one defines
carrier frequency
the
frequency cellThe to
to
Zero (0)
controlled
neighbor is the
by
cellsIub lowestparameter
(having seven (7) the
InterFreqNcellPriorityCoverage. priority level for
be
be measured,
priority ofif the
measured,
measurement.
range
Inter-frequency the the
the
parameter RNCthe
RNC
transmission
measurement
same
selects
selects
varies aUTRA
a
from
subset
congestion
subset
procedure zero to
RF of
of orchannel
inter-frequency
BTS
inter-frequency
7.
will measure
number) that
Zerocongestion
is the one lowest (that
are
is, measured
neighbour
any
neighbour BTS cells first.
failure)
cells ((having
(having is the the
the same
reason
same forUTRA
UTRA the RF
RRC
RF channel
connection
channel number)
number) that
and
are 7 the highest
frequency
measured at a first.time. priority
If there level.is more than one carrier frequency to
rejection.
which
In case are The measured cell RNC with the
first. highest priority ofisinter-frequency
selected and the
be
Zero (0)of
measured,
corresponding is intra-RNC
the the lowest
frequency
handover,
and selects
isseven
the
aDC (7)
target
HSDPA
subset
the highest
frequency.
must be enabled
priority
The level for
following
The parameter
(WCEL-DCellHSDPAEnabled)
neighbour
measurement. cells defines
(having the
the minimum
same at least
UTRA required
in one
RF level CPICH
of
channel the Ec/N0 level
neighboring
number) that
Zero
principle
In caseis the lowest
ofisasuggested
quality andreason 7
when the highest
setting priorities
handover, priority
the for
forinter-RNC
measurement cells. Cells order having
is
of
cells
are
The the inneighboring
order
measured
parameter tofirst.
definesUTRA
measure the frequency
frequency.
minimum for
In inter-frequency
case
required of CPICH absolute
RSCP level
measurement.
the same
controlled UTRA
by the RF channel
parameter number also
InterFreqNcellPriorityQuality.have the same priority.
The
priority
handover,
In case based cell reselection.
WCEL-DCellHSDPAEnabled is not relevant.
of isthe
Determines
It
range
In case ofof
suggested
of theintra-RNC
neighboring
a
the
serviceto
parameter UTRA
minimum
set handover,
andprioritiesfrequency
required
varies
load soMIMO
from
reason that
zero must
forthe
CPICH 7.beZero
inter-frequency
Ec/No
tosame
handover,
enabled
level
frequency
the
(WCEL-
absolute
which
ismeasurement
the band
lowest must is
MIMOEnabled)
priority
be exceeded
selected,
and 7 based
the because
highest cell
by attheleast
reselection.
UE in
measurement
priority capabilityone
level. of the neighboring
result
(that is, of the
supported cells
inter-frequencyin
frequency order to
QqualminFDD
order
measure is controlled IE has
byInthe a mandatory
parameter default value,
AdjiPrioritySLHO. which is the
The range
neighbour
bands),
Qqualmin
of isfrequency.
the parameter
cell known
not
value before
for the
varies
thecase
during
serving
from
ofre-selection
cellthe
zero
inter-RNC
RRC
cell. Qqualmin
todefault
handover,
7.connection
becomes
Zerovalue, therequest.
is value
WCEL-
possible.
for the
lowest If the
MIMOEnabled
QrxlevminFDD
operator knows is
IE not
the has relevant.
a
capability mandatory of all the UEs, then which
other isandthe 7
frequency
serving
the
The highest
Qrxlevmin cellvalue
parameter is defined
priority defines
for level.
the by the the
serving existing
Srxlev cell. based WCEL-QqualMin
Qrxlevmin threshold value used forparameter.
by
the the
bands
If the can be
value of have
the the highest priority.
WCEL-QqualMin equals the value of athe HOPI-
UE
serving
The for WCDMA
cell is
parameter defines inter-frequency
defined by the
the Srxlev cell
existing reselection
WCEL-QrxlevMin
based threshold toward used higher
parameter.
by
AdjiQqualminFDD
absolute
If the priority parameter,
layer when absolute QqualminFDD priorities IEaremust notthe
applied. beAthe
UE forvalue
broadcasted WCDMA of theinter-frequency
in
WCEL-QrxlevMin
SIB19.
equals
cell reselection the value
toward of an equal HOPI-
threshold
AdjiQrxlevminFDD
This
or lower parameter is defined
absolute determinesfor each
parameter,
priority layer theabsolute
QrxlevminFDD
minimum
when priority
absolute required layer.
IE must CPICH
priorities not
areRSCPbe
broadcasted
level which
applied. thein RACH
A threshold SIB19. is measurement
defined for each result of thepriority
absolute sourcelayer. cell must
Defines the
achieve before the blind priority level inter-frequency
of the inter-frequency handover neighbour
is possible. cell in
the hierarchical cell re-selection procedure. 0 indicates the lowest
HCS
Defines priority and 7 indicates
the threshold level which the highest must be HCS priority.by
exceeded Lower
the CPICHHCS Ec/No or CPICH RSCP of the inter-frequency neighbour c
priority values are meant for larger macro cells and higher HCS
Determines
priority values theare minimum
meant required
for smaller CPICH RSCPcells. level which must
Please
be exceedednoticeby that the if CPICH
measurement RSCP ispico/micro
set as
result of quality
the measure with the WCEL-CellSelQualMeas parameter then the parameter v
inter-frequency
Defines
This the timeisperiod
parameter used during
in the which
cell the Temporary
ranking
re-selection between and Offset
GSM
ranking and 1/2 is
neighbour
applied in cellcell
the before the cell re-selection
re-selection procedure becomes
for the possible.
inter-frequency
WCDMA WCDMA
between cells when cells.the The inter-frequency
value of thisneighbour
ranking parameter
between cell has the
is subtracted
WCDMA cells
This
neighbour
same parameter
HCS cell.
priority is usedlevel inas thethe cell
servingre-selection
cell. and ranking
from
when
between the measured
theWCDMA inter-frequency CPICH
cells. The RSCP
neighbour
value ofcell of the
thishas inter-frequency
the same
parameter is HCS neighbour
subtracted
cell before
priority
from level the asUE thecompares
serving the quality
cell. the measure with the cell re-
If the the measured
neighbour
selection/ranking cell CPICH
has a different
criteria.
Ec/No ofHCS inter-frequency
priority level, theneighbour offset
cell
value before
is the UE
applied for compares
the HCS the re-selection
cell quality measure between with GSM the cell and re-
If the neighbour cell
selection/ranking has a different HCS priority level, the offset
criteria.
WCDMA
value is applied cells. The for theoffset HCS is subtracted
cell re-selection (during PenaltyWCDMA
between Time) from
the
cells. The offset is subtracted (during Penalty Time) from the cell.
measured CPICH RSCP of the inter-frequency neighbour
measured
This parameter CPICH Ec/No of
identifies the inter-frequency neighbour cell.
The alternative values arethe theHOPI following: (object for inter-frequency
3 dB, 6 dB, 9 dB, 12 dB,
Handover
15 Path) uniquely within RNC.
ThedB, 18 dB,
alternative 21 dB and
values are'Infinity'.
the following: 2 dB, 3 dB, 4 dB, 6 dB, 8
dB, 10 dB, 12 dB and 'Infinity'.
The parameter defines the origin of the last configuration action
0...7, step 1 0
-24...24 dB, step 0.5 dB 1 dB
-24...0 dB, step 0.5 dB -13 dB
-24...0 dB, step 0.5 dB -14 dB
-115...-25 dBm, step 1 dBm -100 dBm
-115...-25 dBm, step 1 dBm -95 dBm
0...60 s, step 1 s 10 s
-50...100 dB, step 1 dB 2 dB
0...7, step 1 0
0...7, step 1 0
0...7, step 1 0
0...7, step 1 0
0...7, step 1 0
0...7, step 1 0
0...7, step 1 0
-24...0 dB, step 1 dB -18 dB
-24...0 dB, step 1 dB -18 dB
-119...-25 dBm, step 2 dBm -115 dBm
-115...-25 dBm, step 1 dBm -92 dBm
0...7, step 1 0
-24...0 dB, step 0.5 dB -24 dB
-119...-25 dBm, step 2 dBm -115 dBm
0...60 s, step 10 s 0s
-50...50 dB, step 1 dB 0 dB
-50...50
3 dB (0),dB, step
6 dB (1),1 9dB
dB (2), 12 dB (3), 15 dB 0 dB
(4), 18 dB (5), 21 dB
2 dB (0), 3 dB (1), 4 dB (6),(2),
1006 dB. Infinity
dB (3), 8 dB(7)(4), 3 dB
10 dB (5), 12 dB (6), 100 dB. Infinity (7) 2 dB

Nokia Value
HOPI set 1 (MACRO RT & NRT, F1) Not

Used
0 0
1 dB 1 dB
-13 dB -13 dB
-14 dB -14 dB
-100 dBm -100 dBm
-95 dBm -95 dBm
10 s 10 s
2 dB 2 dB
0 0
0 0
0 0
0 0
0 0
0 0
0 0
-18 dB -18 dB
-18 dB -18 dB
-115 dBm -115 dBm
0 dB 0 dB
0 dB 0 dB
-92 dBm -92 dBm
0 0
-24 dB -24 dB
-115 dBm -115 dBm
0s 0s
0 dB 0 dB
0 dB 0 dB
3 dB 3 dB
2 dB 2 dB
Not applicable 1
HOPI set 7 (MACRO RT & NRT, F2 & F3 > F1) HOPI set 8 (MACRO RT & NRT, F1 & F2 > F3)
0 0
1 dB 1 dB
-13 dB -13 dB
-14 dB -14 dB
-105 dBm -105 dBm
-95 dBm -95 dBm
10 s 10 s
0 dB 0 dB
0 1
0 0
0 0
0 0
0 1
0 0
0 0
-18 dB -18 dB
-18 dB -18 dB
-115 dBm -115 dBm
0 dB 0 dB
0 dB 0 dB
-92 dBm -92 dBm
0 0
-24 dB -24 dB
-115 dBm -115 dBm
0s 0s
0 dB 0 dB
0 dB 0 dB
3 dB 3 dB
2 dB 2 dB
7 8
O2 UK Value
HOPI set 9 ( MICRO RT & NRT, F1) HOPI set 10 (MICRO RT & NRT, F2)
0 0
1 dB -2 dB
-13 dB -16 dB
-14 dB -14 dB
-100 dBm -110 dBm
-95 dBm -95 dBm
10 s 10 s
2 dB -2 dB
0 0
0 0
0 0
0 0
0 0
0 0
0 0
-18 dB -18 dB
-18 dB -18 dB
-115 dBm -115 dBm
0 dB 0 dB
0 dB 0 dB
-92 dBm -92 dBm
0 0
-24 dB -24 dB
-115 dBm -115 dBm
0s 0s
0 dB 0 dB
0 dB 0 dB
3 dB 3 dB
2 dB 2 dB
9 10
O2 UK Value
HOPI Set 11 (F1 to Femto F2 RT & NRT) HOPI Set 12 (F3 to Femto F2 for RT & NRT)
0 0
-2 dB -2 dB
-16 dB -16 dB
-14 dB -14 dB
-110 dBm -110 dBm
-95 dBm -95 dBm
10 s 10 s
-2 dB -2 dB
0 0
0 0
0 0
0 0
0 0
0 0
0 0
-15 dB -15 dB
-18 dB -18 dB
-115 dBm -115 dBm
0 dB 0 dB
0 dB 0 dB
-92 dBm -92 dBm
0 0
-24 dB -24 dB
-101 dBm -101 dBm
0s 0s
-40 dB -40 dB
-40 dB -40 dB
3 dB 3 dB
2 dB 2 dB
11 12
HOPI Set 90 (F1& F2 Macro RT & NRT HOPI Set 91(F3 Macro RT & NRT incase of a
incase of a co-sited U900 site) co-sited U900 site)
0 0
1 dB 1 dB
-13 dB -10 dB
-14 dB -14 dB
-105 dBm -105 dBm
-95 dBm -95 dBm
10 s 10 s
0 dB 0 dB
0 0
0 0
0 0
0 0
0 0
0 0
0 0
-18 dB -12 dB
-18 dB -18 dB
-115 dBm -115 dBm
0 dB 0 dB
0 dB 0 dB
-92 dBm -92 dBm
0 0
-24 dB -24 dB
-115 dBm -115 dBm
0s 0s
0 dB 0 dB
0 dB -10 dB
3 dB 3 dB
0 dB 2 dB
90 91
HOPI Set 20 (INTER_RNC E/// CNHHO)
0
1 dB
-13 dB
-14 dB
-100 dBm
-95 dBm
10 s
2 dB
0
0
0
0
0
0
0
-20 dB
-18 dB
-115 dBm
0 dB
0 dB
-92 dBm
0
-24 dB
-115 dBm
0s
0 dB
0 dB
3 dB
2 dB
20
Not Applicable
NWP
NWP
NWP
NWP
NWP
NWP
NWP
NWP
NWP
NWP
NWP
NWP
NWP
NWP
NWP
NWP
NWP
NWP
NWP
NWP
NWP
NWP
NWP
NWP
NWP
NWP
Set to 0 dB January 2010 for all sets (Set by NWP
John Button)
NWP
NWP
NWP
NWP
Frequency
11460 Extended Discrepancy Weekly


12638


RU20 on TOP
RU20 on TOP
RU20 on TOP
New in RU40 New in RU50 EP1
New In RU50 EP1 9.00

9.00
9.00
9.00
9.00
4.50
9.00
9.00
8.16
8.70
HOPL Parameters
Full Name

AdjLAbsPrioCellReselec Cell Reselection Absolute Priority
AdjLFreqPriority Adjacent LTE Frequency Priority
AdjLMinRSRPLevel LTE Carrier frequency selection Minimum Rx Power
level
LTE Carrier frequency selection Minimum Rx qual level
AdjLMinRSRQLevel
AdjLQqualminEUTRA Qqualmin for LTE cell reselection
AdjLQrxlevminEUTRA Cell Reselection Minimum RX level
AdjLThreshigh Cell Reselection Threshold high
AdjLThreshigh2 Threshold high 2 for LTE cell reselection
AdjLThreslow Cell Reselection Threshold low
AdjLThreslow2 Threshold low 2 for LTE cell reselection
HOPLId HOPL Identifier
O&M Parameters
HOPLChangeOrigin Change origin
HOPL HC
HOPL HC
HOPL HC
HOPL HC
HOPL HC
HOPL HC
HOPL HC
HOPL HC
HOPL HC
HOPL HC
HOPL Identification
HOPL O&M
Description
The parameter defines the absolute priority level of the inter-rat

LTE
This (E-UTRA)
parameterneighbor defines the frequency
priority (0 in the
lowest absolute
priority, priority
and 7based
highest
cell reselection
priority) to LTE procedure.
carrier 0
frequencies.indicates The the lowest
priority is absolute
used to priority
define
This
and 7parameter
indicates determines
the highest the minimum
absolute priority.required RSRP power
the
level,order
which of frequencies
the determines
measurement given result
to the of UEthe whencell LTEunder measurements
LTEquality
carrier
This
are parameter
started and when UE is the minimum
redirected to required
LTE. RSRQ
frequency
The
level, priority must
must
which thedefines meet
be or
defined
measurement exceed so before
that
result of the
priorities redirection
the E-UTRA for to
different
carrier LTE
radio
The
system
access parameter
becomes
technologies possible. the minimum
(WCDMA, LTE, required
GSM) areRSRQ always level of the
different.
frequency
The parameter
neighboring must
LTE ismeet
also or
frequencyusedexceed by
for before
the Smart
absolute the LTEredirection
priority Handover
based to
cell LTE
(WCDMA
The
This
system parameter
parameter
becomes also determines
determines
possible. for the minimum
theprioritizing
minimum required required LTE RSRPlevel
RSRP
to
for LTE
reselection.
the inter-RAT
Smart LTE handover)
Handover (WCDMA to the inter-RAT
LTE neighbor
level
The needed to also
parameter
frequencies.
This parameter access
defines the
the LTE
determines Srxlev cell [Qrxlevmin
thebased
minimum in 36.304]
required
threshold usedRSRQby the
handover).
level for the Smart LTE Handover (WCDMA to LTE inter-RAT
UE
The
If
The for
valuecell
theparameter reselection
-35 dB
parameterdefines towards
corresponds
is set toSqual a value a higher
with the
that isbased
(RSRQ) absolute
3GPP
too low, priority
mandatory layer
default
which represents
threshold used by
handover).
when
value absolute
"negative priorities
infinity". are
3GPP applied.
range Aofnot
threshold
theend parameterisindefined for -3
is -34...
very
the UElow forreceived
cell power,
reselection then
toward UEs a do
higher up
absolute successful
priority
If theIfparameter
This
each
dB. parameter
absolute
the default isvalue
priorityset layer.
defines tois agiven
the value
Srxlev that
Threshold
to based
the is toothreshold
refers
parameter, low,
to which
the used
minimum byLTE
representsthe
LTE
reselection
layer
low when
received of LTE
absolute
quality, cell
thenevery
prioritiesUEs time.
are
do applied.
not end Alower
up threshold
in successfulis defined
UE
RSRP for cell
needed
QqualminEUTRA
The parameter reselection
to access
IE
defines musttowards
to
Squal the
not bean
LTE equal
cell
broadcasted
(RSRQ) or
provided
based in absolute
by
SIB19.
threshold usedpriority
by
If
forthe
each parameter
reselection absolute is set
of LTEpriority
cell to a
every value
layer.time. that is too high, which represents
layer when
AdjLQrxlevminEUTRA.
the UE absolute
for cell reselectionpriorities are applied. A threshold is defined
high received power, then toward
UEs doanot lowercome absolute
acrosspriority LTE
such strong
for each
layerverywhen absolute
absolute priority layer.
priorities Threshold
are applied. refers
A threshold to the isminimum
defined
cell
The
If 3GPP
theRSRP often.
parameterrange of
is setthe parameter
to athe value Threshx,high2
that(object
is too high, is 0...31 dB.
whichbyrepresents The
LTE
This
for parameter
each needed
absolute to access
identifies
priority layer. to the
HOPL LTE cellforprovided
inter-system
value
high 32
receiveddB
AdjLQrxlevminEUTRA. of the
quality, AdjLThreshigh2
then UEs do is the
not come special value,
across such strong which
Handover
means Path to LTE) uniquely within RNC.
cell verythat the parameter
often. Threshx,high2 will not be broadcasted
The 3GPP range of the parameter Threshx,low2 is 0...31 dB. The
in SIB19.
This
valueparameter
32 dB of the defines the origin of
AdjLThreslow2 is the
the lastspecialconfiguration
value, which action
affecting
means the object.
that the parameter
Both Threshx,high2 IE andThreshx,low2
Threshx,low2will not be broadcasted in
IE (HOPL-
SIB19.
AdjLThreslow2) must be configured at the same time and
broadcasted in SIB19. Otherwise, UE is not using the parameters.
Both Threshx,low2 IE and Threshx,high2 IE (HOPL-
AdjLThreshigh2)
The priorities for which must be both configured
Threshx,high2 at the same time and
and Threshx,low2 are
broadcasted
provided in SIB19 in SIB19. mustOtherwise,
always be the UE isfrom
different not using the
the priorities for
parameters.
which both Threshx,high2 and Threshx,low2 are not provided in
SIB19.
The priorities for which both Threshx,high2 and Threshx,low2 are
provided in SIB19 must always be different from the priorities for
which both Threshx,high2 and Threshx,low2 are not provided in
SIB19.
0...7, step 1 1
0...7, step 1 0
-140...-44 dBm, step 2 dBm -112 dBm
-19.5...-3 dB, step 0.5 dB -12 dB
-34...-3 dB, step 1 dB, Negative infinity (3GPP -35 dB
mandatory default) (-35)
-140...-44 dBm, step 2 dBm #N/A
0...62 dB, step 2 dB #N/A
0...31 dB, step 1 dB, Threshx, high2 is not 32 dB
broadcast in SIB19 (32)
0...62 dB, step 2 dB #N/A
0...31 dB, step 1 dB, Threshx, low2 is not 32 dB
broadcast in SIB19 (32)

Nokia Value O2 UK Value
HOPL set 1 (MACRO TOWARDS L800)
1 6
0 0
-112 dBm -112 dBm
-12 dB -12 dB
-35 dB -35 dB
#N/A -124 dBm
#N/A 8 dB
32 dB 32 dB
#N/A 0 dB
32 dB 32 dB
Not applicable 1

O2 UK Value
HOPL set 2 (SPECIAL EVENTS SITES HOPL set 3 (MACRO TOWARDS L1800)
ONLY TOWARDS L800)
6 5
0 0
-112 dBm -112 dBm
-12 dB -12 dB
-35 dB -35 dB
-124 dBm -124 dBm
12 dB 8 dB
32 dB 32 dB
0 dB 0 dB
32 dB 32 dB
2 3

NWP
NWP
NWP
NWP
NWP
NWP
NWP
NWP
NWP
NWP
NWP
NWP
Frequency
RU20 on TOP
RU20 on TOP
RU20 on TOP
RU20 on TOP
RU20 on TOP
No Auto Disc Check Required RU20 on TOP

New In RU50 EP1

New In RU50 EP1
New In RU50 EP1
New In RU50 EP1
New In RU50 EP1
New In RU50 EP1

9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
HOPS Parameters

AdjsQrxlevMin Cell Re-selection Minimum RX Level
EcNoAveragingWindow CPICH Ec/No Averaging Window
EnableInterRNCsho Enable Inter-RNC Soft Handover
EnableRRCRelease Enable RRC Connection Release
HHOMarginAverageEcNo HHO Margin for Average Ec/No
HHOMarginPeakEcNo HHO Margin for Peak Ec/No
HSDPAAvailabilityIur HSDPA availability of the neighbouring DRNC cell
HSUPAAvailabilityIur HSUPA availability of the neighbouring DRNC cell
ReleaseMarginAverageEcNo Release Margin for Average Ec/No
ReleaseMarginPeakEcNo Release Margin for Peak Ec/No
AdjsHCSpriority Cell Re-selection HCS Priority
AdjsHCSthreshold Cell Re-selection HCS Threshold
AdjsQqualMin Cell Re-selection Minimum Quality
AdjsPenaltyTime Cell Re-selection Penalty Time
AdjsQoffset1 Cell Re-selection Quality Offset 1
AdjsQoffset2 Cell Re-selection Quality Offset 2
AdjsTempOffset1 Cell Re-selection Temporary Offset 1
AdjsTempOffset2 Cell Re-selection Temporary Offset 2
HOPSId HOPS Identifier
O&M Parameters
HOPSChangeOrigin Change origin
HOPS HC
HOPS HC
HOPS HC
HOPS HC
HOPS HC
HOPS HC
HOPS HC
HOPS HC
HOPS HC
HOPS HC
HOPS SI
HOPS SI
HOPS SI
HOPS SI
HOPS SI
HOPS SI
HOPS SI
HOPS SI
HOPS Identification
HOPS O&M
Description
Determines the minimum required CPICH RSCP level which must

be
Thisexceeded
parameter bydetermines
the measurement the number resultofofeventthe neighbouring
triggered periodic cell
before the
intra-frequency cell re-selection
measurement becomes
reports possible.
from which
Parameter indicates whether the neighbouring cellthe can RNCparticipate
calculates
in a soft the
handover, averaged if it is CPICH
controlled Ec/No by avalues.
RNC other than thethelocal
When the intra-frequency neighbour cell in question enters
RNC.
reporting range determines
and triggersthe either event 1A (cell addition) or
This parameter maximum allowed difference
event
between 1C (cell replacement),
the averaged CPICH the UE
Ec/No shall
of the transmit
neighbouring a Measurement
cell and
This
Report parameter
to the RNC determines
in Ec/No
order to theadd maximum
the allowed
neighbouring difference
cell to the
the averaged
between the CPICH
CPICH Ec/No of the best active cell in situations
active
This
when set.inter-RNC
parameter
an If the RNC
determines
soft notof
is handover thetoneighbour
able
whether isadd
not the
HSDPA cell
is
possible
and the in
neighbouring
available
between
CPICH
cell
theto
these
Ec/No
the of
active
neighboring the
set, best
DRNCthe active
parameter
cell. cell in situations
Enable
Thiswhether
parameter RRC when an
Connection
can be inter-RNC
used Ec/No Release
to in the soft
cells.
This
handoverIf theisdifference
parameter not determines
possible between
between thethese
averaged
HSUPA cells.isCPICH
available
If the difference values
in
indicates
enable/disable
exceeds whether
the DRNC
value aof RRC
HS-DSCH/E-DCHthe connection
parameter, MAC-d release
the can flow
RNC (excluding
setup
performs intothe
an the
intra-
neighboring
CPICH
emergency
This Ec/No
parameter values
calls) is cell.
required
determines This
exceeds theparameter
in the
order value
maximum to of
avoid beexcessive
the
allowed used
parameter,
difference uplink
neighboring
frequency
enable/disable hardDRNC handover
E-DCH cell.MAC-d in order flow tosetup
avoid inexcessive
the neighboring uplink
RNC
between performs
interference the due an
averaged tointra-frequency
non-optimum
CPICH Ec/No hard
fast handover
closed
of the loop in
neighbouring order
power to
cellavoid
control.and
interference
This
DRNC parameter
excessive cell. due
uplink to non-optimum
determines
interference the due fast
maximum
to closed loop
allowed
non-optimum power
difference
fast control.
closed loop
the averaged
between CPICH Ec/No of the best
the CPICH Ec/No of the neighbour cell and the CPICH active cell in situations
powerthe
when control.
RNC is not able to perform a soft handover between
Ec/No
Defines ofthe
thethreshold
best active levelcellwhich
in situations
must when
beaveraged
exceededthe RNC by theis not
CPICH Ec/No or CPICH RSCP of the neighbouring cell before
these
Defines
able tocells.
the Ifpriority
perform the a difference
softlevel of the
handover between the
neighbouring
between these cellcells. CPICH
in the If the Ec/No
values
difference exceeds
hierarchical the value
cell re-selection
between CPICH of the parameter,
procedure.
Ec/No values the
0 exceeds RNC
indicatesthe releases
thevalue
lowest of the
thethe WCEL-CellSelQualMeas parameter then the paramet
Please
RRC notice
connection thatiniforderCPICH to RSCPexcessive
avoid is set as quality
uplink measure
interference with
HCS prioritythe
parameter, and RNC 7 indicates
releasesthe thehighest HCS priority.
RRC connection LowertoHCS
in order
due
avoidtoexcessive
Determines
priority non-optimum
values theare minimum
meant
uplink fast closed
required
for larger
interference loopCPICHpower
macro
due tocellscontrol.
Ec/No and
non-optimum level which
higher HCS
fast must
be exceeded
priority
closed loop
Defines values by
power
the time are the measurement
meant
control.
period during which the Temporary Offset 1/2cell
for smaller result of
pico/micro the neighbouring
cells. is
before
applied the
in cell
the re-selection
cell re-selection becomes
procedure possible.
for the neighbour cell in
This parameter is used in the cell re-selection and ranking
question.
between WCDMA cells.in The
This parameter is used thevalue of this parameter
cell re-selection and ranking is subtracted
from
betweenthe measured
WCDMA CPICH
cells.in The RSCP of the neighbour cell before the
Thiscompares
UE parameter theis used
quality thevalue
measure
of this parameter
cell ranking
with the between
cell re-
is subtracted
GSM and
from
WCDMA the measured
cells when CPICH
the Ec/No ofcell
neighbour thehas neighbour
the same cellHCSbefore the
priority
selection/ranking
This
UE parameterthe
compares criteria.
is used
quality inmeasure
the cell rankingwith the between
cell re- WCDMA cells
level
when as
thethe serving cell.
neighbour cell has the same HCS priority level as the
selection/ranking criteria.
serving cell.
If theparameter
This neighbour identifies
cell has athe different
HOPSHCS (object priority level, the offset
for intra-frequency
value
Handover is applied
If the neighbourPath) cell for the
uniquely HCS
has awithin cell
different re-selection
RNC. between
HCS priority level, the GSM and
offset
WCDMA cells. The offset is subtracted
value is applied for the HCS cell re-selection between WCDMA (during Penalty Time) from
the
The measured
parameter CPICH
defines RSCP
the of
origin theof
cells. The offset is subtracted (during Penalty Time) from the neighbour
the last cell.
configuration action
affecting
measuredthe object.
CPICH Ec/No of the neighbour cell.
The alternative values are the following: 3 dB, 6 dB, 9 dB, 12 dB,
15
ThedB, 18 dB, 21
alternative dB and
values are'Infinity'.
the following: 2 dB, 3 dB, 4 dB, 6 dB, 8
dB, 10 dB, 12 dB and 'Infinity'.
-119...-25 dBm, step 2 dBm -115 dBm

1...32 MeasReport, step 1 MeasReport 8 MeasReport
No (0), Yes (1) 1
No (0), Yes (1) 0
-6...6 dB, step 0.1 dB 1 dB
-6...6 dB, step 0.5 dB 2 dB
HSDPA unavailable (0), HSDPA available (1) HSDPA available (1)
HSUPA unavailable (0), HSUPA available (1) HSUPA available (1)
-6...6 dB, step 0.1 dB 2.5 dB
-6...6 dB, step 0.5 dB 3.5 dB
0...7, step 1 0
-24...0 dB, step 0.5 dB -24 dB
-24...0 dB, step 1 dB -18 dB
0...60 s, step 10 s 0s
-50...50 dB, step 1 dB 0 dB
-50...50 dB, step 1 dB 0 dB
3 dB (0), 6 dB (1), 9 dB (2), 12 dB (3), 15 dB 3 dB
(4),
2 dB18 dB3(5),
(0), dB 21
(1),dB (6),(2),
4 dB 1006 dB. Infinity
dB (3), 8 dB(7)(4), 2 dB
10 dB (5), 12 dB (6), 100 dB. Infinity (7)

Nokia Value
R99 DPCH HSDPA
-115 dBm -115 dBm

1 1
0 (1 HSDPA) 0 (1 HSDPA)
1 dB 1 dB
2 dB 2 dB
HSDPA available (1) HSDPA available (1)
HSUPA available (1) HSUPA available (1)
2.5 dB (2.0 dB HSDPA) 2.5 dB (2.0 dB HSDPA)
3.5 dB 3.5 dB
0 0
-24 dB -24 dB
-18 dB -18 dB
0s 0s
0 dB 0 dB
0 dB 0 dB
3 dB 3 dB
2 dB 2 dB

HOPS set 1 ( MACRO RT & NRT) INTRA HOPS set 2 (MACRO RT & NRT F1)
RNC INTER RNC
-115 dBm -115 dBm

1 1
0 0
1 dB 1 dB
2 dB 2 dB
2.5 dB 2.5 dB
3.5 dB 3.5 dB
0 0
-24 dB -24 dB
-18 dB -18 dB
0s 0s
0 dB 0 dB
0 dB 3 dB
3 dB 3 dB
2 dB 2 dB
1 2

HOPS set 3 ( MICRO RT & NRT, F1) HOPS set 4 (MICRO RT & NRT F1)
INTRA RNC INTER RNC
-115 dBm -115 dBm

1 1
0 0
1 dB 1 dB
2 dB 2 dB
2.5 dB 2.5 dB
3.5 dB 3.5 dB
0 0
-24 dB -24 dB
-18 dB -18 dB
0s 0s
0 dB 0 dB
0 dB 3 dB
3 dB 3 dB
2 dB 2 dB
3 4

HOPS set 7 (MACRO RT & NRT, F2) HOPS set 9 TWO carrier MICRO RT &
INTRA RNC NRT, F2) INTRA RNC
-115 dBm -115 dBm

1 1
0 0
1 dB 1 dB
2 dB 2 dB
2.5 dB 2.5 dB
3.5 dB 3.5 dB
0 0
-24 dB -24 dB
-18 dB -18 dB
0s 0s
0 dB 0 dB
0 dB 0 dB
3 dB 3 dB
2 dB 2 dB
7 9

HOPS set 10 (TWO carrier MICRO RT & HOPS set 11 ( MACRO RT with HSDPA,
NRT F2) INTER RNC F1) Multi-RAB
-115 dBm -115 dBm

1 1
0 0
1 dB 1 dB
2 dB 2 dB
2.5 dB 2.5 dB
3.5 dB 3.5 dB
0 0
-24 dB -24 dB
-18 dB -18 dB
0s 0s
0 dB 0 dB
3 dB 0 dB
3 dB 3 dB
2 dB 2 dB
10 11

O2 UK Value
HOPS set 12 (MACRO RT with HSDPA, HOPS set 13 (MACRO RT with HSDPA,
F2) Multi-RAB F3) Multi-RAB
-115 dBm -115 dBm

1 1
0 0
1 dB 1 dB
2 dB 2 dB
2.5 dB 2.5 dB
3.5 dB 3.5 dB
0 0
-24 dB -24 dB
-18 dB -18 dB
0s 0s
0 dB 0 dB
0 dB 0 dB
3 dB 3 dB
2 dB 2 dB
12 13

UK Value
HOPS set 14 ( MICRO RT with HSDPA, HOPS set 15 TWO carrier MICRO RT with
F1) Multi-RAB HSDPA, F2) Multi-RAB
-115 dBm -115 dBm

1 1
0 0
1 dB 1 dB
2 dB 2 dB
2.5 dB 2.5 dB
3.5 dB 3.5 dB
0 0
-24 dB -24 dB
-18 dB -18 dB
0s 0s
0 dB 0 dB
0 dB 0 dB
3 dB 3 dB
2 dB 2 dB
14 15

HOPS set 16 (MACRO RT & NRT F2) HOPS set 20 (MACRO HSDPA FI)
INTER RNC
-115 dBm -115 dBm

1 1
0 1
1 dB 1 dB
2 dB 2 dB
2.5 dB 2 dB
3.5 dB 3.5 dB
0 0
-24 dB -24 dB
-18 dB -18 dB
0s 0s
0 dB 0 dB
3 dB 0 dB
3 dB 3 dB
2 dB 2 dB
16 20

HOPS set 21 (MACRO HSDPA F2) HOPS set 25 (MICRO HSDPA F1)
-115 dBm -115 dBm

1 1
1 1
1 dB 1 dB
2 dB 2 dB
2 dB 2 dB
3.5 dB 3.5 dB
0 0
-24 dB -24 dB
-18 dB -18 dB
0s 0s
0 dB 0 dB
0 dB 0 dB
3 dB 3 dB
2 dB 2 dB
21 25

HOPS set 26 (TWO carrier MICRO HOPS set 30 (MACRO HSDPA F3)
HSDPA, F2)
-115 dBm -115 dBm

1 1
1 1
1 dB 1 dB
2 dB 2 dB
2 dB 2 dB
3.5 dB 3.5 dB
0 0
-24 dB -24 dB
-18 dB -18 dB
0s 0s
0 dB 0 dB
0 dB 0 dB
3 dB 3 dB
2 dB 2 dB
26 30

HOPS set 31 ( MACRO RT & NRT F3) HOPS set 32 (MACRO RT & NRT F3)
INTRA RNC INTER RNC
-115 dBm -115 dBm

1 1
0 0
1 dB 1 dB
2 dB 2 dB
2.5 dB 2.5 dB
3.5 dB 3.5 dB
0 0
-24 dB -24 dB
-18 dB -18 dB
0s 0s
0 dB 0 dB
0 dB 3 dB
3 dB 3 dB
2 dB 2 dB
31 32

HOPS 35 (Femto F2 to F2 macro & HOPS 49 (Macro NRT INTER-RNC
micro) Anchoring to E///)
-101 dBm -115 dBm

Not applicable 8 MeasReport
Not applicable Yes (1)
Not applicable No (0)
Not applicable 6 dB
Not applicable 6 dB
Not applicable HSDPA available (1)
Not applicable HSUPA unavailable (0)
Not applicable 6 dB
Not applicable 6 dB
Not applicable 0
Not applicable -24 dB
-15 dB -18 dB
Not applicable 0s
-2 dB 0 dB
-2 dB 3 dB
Not applicable 3 dB
Not applicable 2 dB
35 49

HOPS 50 (Macro RT INTER-RNC

Anchoring to E///)
-115 dBm
8 MeasReport
Yes (1)
No (0)
3 dB
3 dB
HSDPA available (1)
HSUPA unavailable (0)
6 dB
6 dB
0
-24 dB
-18 dB
0s
0 dB
3 dB
3 dB
2 dB
50
Not applicable
NWP 11005
NWP 11008
NWP 11058
NWP 11000
NWP 11035
NWP 11029
NWP
NWP
NWP 11044
NWP 11039
NWP 11061
NWP 11057
Set consistently with Qqualmin NWP 10996
NWP 11053
NWP 11019
NWP 11037
NWP 11056
NWP 10993
NWP 11021
NWP
Discrepancy - Criticality New in RU20
Frequency




RU20 on TOP
RU20 on TOP
Issue in Which Parameter Added
New in RU50 EP1
or Last Changed
9.00
9.00
8.14
8.14
IPQM Parameters
Abbreviated Name
Transmission Parameters
BackgroundTCToDSCP
ConversationalTCToDSCP
IPQMId
InteractiveTHP1TCToDSCP
StreamingTCToDSCP
O&M Parameters
IPQMChangeOrigin
rs
Background TC to DSCP mapping IPQM Transmission

Conversational TC to DSCP mapping IPQM Transmission
IP Qos Management Identifier IPQM Transmission
Interactive THP1 TC to DSCP mapping IPQM Transmission
Streaming TC to DSCP mapping IPQM Transmission
Change origin IPQM O&M

Description Range and Step
The Differentiated Services Code Point (DSCP) 0...63, step 1

for
TheBackground
Differentiated UMTS trafficCode
Services class.Point
The (DSCP)
DSCP 0...63, step 1
value
for is used
Conversational in IP packet
UMTS to define Per-Hop-
Identifier
Behaviour. for the Quality of traffic
Serviceclass. The DSCP
settings for the 1...8, step 1
value
Iu is used
Interface. in IP packet to define Per-Hop-
The Differentiated Services Code Point (DSCP)
Behaviour. 0...63, step 1
Note:
for This parameter
Interactive UMTS is configured
traffic class when
with THP1the IP
The
over Differentiated
Ethernet Services
transport optionCode Point
(NPGE) (DSCP)
is used 0...63, step 1
(Traffic
Note:
for Handling
This
Interactiveparameter
UMTSPriority). The
is configured
traffic DSCP
class value
when
with THP2theisIPin
the
The
used
over Iu-CS
in IP or
Ethernet Iu-PS
Differentiated
packet interface.
Services
to
transportdefine The
Code parameter
Point (DSCP)
Per-Hop-Behaviour.
option (NPGE)value
is used is 0...63, step 1
(Traffic
also
for Handling
valid with
Interactive UMTSPriority).
IPoA Iu-PS
traffic The
with DSCP
classan NPS1
with THP3 is in
based
the Iu-CS
The
used or Iu-PSto
Differentiated
in Handling
IP packet interface.
Services
define The parameter
Code Point (DSCP)
Per-Hop-Behaviour. is 0...63, step 1
network
(Traffic
Note:
also This
valid interface
parameter
with IPoAunit. isThe
Priority).
Iu-PS parameter
The DSCP
configured
with is not
value
when
an The
NPS1 theisused
based IP
for Streaming UMTS traffic class. DSCP
with
used
over the
in GTPU/NIS
IP
Ethernetpacket toHW
transportdefinebased Iu-PS interface.
Per-Hop-Behaviour.
option (NPGE) is
network
value interface
is used
Note: This unit.
in IP packet
parameter The parameter
to define when
is configured is the IPin
used
not
Per-Hop- used
the
The
with Iu-CS
the
Behaviour.
over or
parameter Iu-PS
GTPU/NIS
Ethernet interface.
defines
HW
transport the
based The
origin parameter
of
Iu-PS the last
interface.is in Not defined (0), Network originated configuration action (1),
Note:
also Thiswith
valid
configuration parameter
IPoA
action is option
Iu-PS
affecting with
(NPGE)
configured
thean when
NPS1
object.
is the
used
based IP NetAct RNW plan originated configuration action (2),
the
over Iu-CS or Iu-PS
Ethernet interface.
transport option The parameter
(NPGE) is used is in
network
Note:
also valid interface
Thiswith
parameter unit. The parameter
is configured
IPoAinterface.
Iu-PS with is not
whenbased
anparameter
NPS1 used
the IP Element Manager originated configuration action (3),
the
with
over Iu-CS
the or Iu-PS
GTPU/NIS
Ethernet HWThe
transport based
option The
Iu-PS
(NPGE) interface.
isnot
used is in Configuration action by automatic tuning function (4),
network
also valid interface
with IPoAunit.
Iu-PS parameter
with an NPS1is basedused
the
with Iu-CS or Iu-PS interface.
the GTPU/NIS HWThe based The parameter
Iu-PS interface.is Element Manager originated mass config action (5), NetAct
network
also validinterface
with IPoA unit.
Iu-PS with parameter
an NPS1 is not
basedused originated direct RNW change (6)
with the GTPU/NIS
network interface unit.HWThe based Iu-PS interface.
parameter is not used
with the GTPU/NIS HW based Iu-PS interface.
Default Value Nokia Value O2 UK Value
IPQM-ID 1
0 0 0
46 46 46
Not Applicable Not Applicable 1
26 26 26
18 18 18
10 10 10
34 34 34
Not Applicable Not Applicable Not Applicable

O2 UK Range for Optimisation Comments Classification
Frequency
4.5
4.5
8.0
4.5
4.5
4.5
4.5
4.5
IUCS Parameters
Abbreviated Name
AAL2PTSigForIuCS
CNDomainVersion
CNId
CSCNNRI - NRIMaxForCSCN
CSCNNRI - NRIMinForCSCN
CSFlexiIuWeight
DefaultCN
IUCSId
IuState
MinUDPPortCS
NetworkInd
RelocationSupport
RtcpActivation
SignPointCode
TigOR
TinTR
TRafC
TRatC
O&M Parameters
IUCSChangeOrigin
IUOIdentifier
rs
AAL2PT signalling for IuCS IUCS Telecom

Release version of Core Network IUCS Telecom
Core Network Identity IUCS Telecom
Maximum value of NRI range for CS Core routing IUCS Telecom
Minimum value of NRI range for CS Core routing IUCS Telecom
CS Flexible Iu Weight IUCS Telecom
Default Core Network IUCS Telecom
IuCS Interface Identifier IUCS Telecom
State of Iu interface IUCS Telecom
Minimum UDP Port IUCS Telecom
Network indicator IUCS Telecom
Serving RNC Relocation Support IUCS Telecom
RTCP activation IUCS Telecom
Signalling point code IUCS Telecom
TigOR IUCS Telecom
TinTR IUCS Telecom
TRafC IUCS Telecom
TRatC IUCS Telecom
Change origin IUCS O&M

IUO Object Identifier IUCS O&M
This parameter defines weight value of each CS CN
node (Iu interface) for Flexible Iu feature load
Description
sharing. FlexiIuWeight is used for the weighted
round robin method to select a CN node to balance
the load between the available CN nodes. Load
sharing of Iu nodes is defined by configuring
AAL2 Path Type
FlexiIuWeight (ITU-T
of the Q.2630.2) signaling within the
interface.
The
This code
This parameter
parameter that uniquely
is used identifies
indicates tothe
identify
maximum the
if theRelease
CN
value nodeof the is
version
used
The
NRI weight
value of
as "arange the Core
default
valuethat Network
CNisnode"
used in
used connected
loadwhen
in sharing
CS the
CN to the RNC.
Flexible
decision
selection. Iu
is
This
This
feature
weight parameter
parameter
is active.
value of CNindicates
describes
node dividedthe
theminimum
Core byNetwork
sum value
of all of the of
Identity
NRI
weight value range that is used in CS CN selection.
NOTE: values NRIMinForCSCN of CN nodes and forNRIMaxForCSCN
the domain of onecan
This
When
operator.
be parameter
this
configured parameter describes
to use the samehas the
value state1 (Yes),
value, of indicating
thetheIu coreone
NOTE:
interface
network
User NRIMinForCSCN
of
node
divides the CN
is used
weights Node as the
among and
connectedNRIMaxForCSCN
default
all CN nodes to the
CN node. RNC.
of the can
If the
NRI
be value
configured insteadto useof value
the samerange. value, indicating one
This
parameter parameter
domain/operator has valueis given to every
0 (No), it like
for example CN
is not this:Node
used as the
NRI
connected
default
MSS1 value CNinstead
60 to RNC.ofThe
node. value range. is used by the
parameter
NAS
This node
50 selection
parameter is function for in loaddefinedbalancing and
MSS2
This
routing parameter
decisions. is needed
the identifier eachfor the IUCSIUCS object
and
MSS3
containingIUPS 40 object
the MGW (max. 16
specific CS + 16
connection PS). settings.
This
The parameter
the actual defines
Thusdescriptions of the
weight the minimum
parameter
value used values: UDP
in load port
sharing
value
If for some
calculation
Network that can be
operator used
for e.g.defines
indicator MSS1 for RTP
the DefaultCN
would port allocation.
be parameter
the signalling individual
network of to
weigh one
-or
RTCP
value
which WO-EX
several protocol
divided
the CN= working
nodes
by
signallingusage
sumpoint normally,
has been
forweight
of all
belongs. Default
theconfigured
new calls
values, to value
60/for one Iu-
The
-Yes
CS. parameter
ThisBAL-US , Flexible
(60+50+40)=0.4
parameter is
is used
= barred
IU load
not from only load
balancing
modifiable withbalancing
CN nodes
function
ifpoint
the core that
only
for that
network use
The
the
-There IPcodeover
BAR-US identifies
Ethernet
= barredtheas signalling
transmission
from all connections in the
technology. signalling network.
operator
If the
This shall
weight is
parameter executed
be
value only whether
no monitoring between
is modification
identical for the those
already
forSignPointCode
all CN CN
nodes, nodes
ongoing
ituniquely identifies a Signalling Point.
is active.
Combination of identifies
Parameter NetworkInd and the
terminatesCore Network
which
calls.
means
supports
ongoing have
thatthe
calls. the DefaultCN
equal
relocation load
of parameter
is
SRNC shared or set to Yes.
among
not. all CN
The
Note: parameter
IUCS is not modifiable if theunless core network is active. Parameter modification terminates ongoing calls.
When
nodes.
This parameterIf theobject
disabled, weightnew
is
cannot
calls that
value
a timer
be
will deleted
not
is default
is used bevalue (0)the
monitored,
to determine for butthis
IuState
the it parameter
monitoring will ofthis
thatcontinuethe object hasongoing valuefor BAR-US.
node,
when the means
additional levelnode of for isthe
traffic not used
reduction calls.
load
in Core
sharing.
Network overload should take place. When this
This
This timer
parameter is used to determine
isallused only withwhen CN nodes the Core that use
timer
Network is running,
overload canOVERLOAD
be considered messages cleared. or While
the IP
signalling over Ethernet
point congested as transmission
information technology.
received by
this
This timer
parameter is running, the RNC is
specifies the maximum time for not allowed to
the RNC
increase are ignored.
traffic. specifies
This
Resetparameter
procedure in the RNC. a guard period in the RNC
before sending a RANAP:RESET ACKNOWLEDGE
message.
This parameter defines the origin of the last
The IUO identification
configuration action affecting gives the thereference
object. to the
IUO object used for the IUCS. The IUO object
contains Iu Operator information

R99 (1), Rel4 (2), Rel5 (3), Rel6 (4), Rel7 (5), Rel8 (6),
Not Applicable
Rel9 (7), Rel10 (8), Rel11 (9), Rel12 (10)
0...4095, step 1 -
0...1024, step 1, NRI value not used. (1024) 1024
0...100, step 1 0
No (0), Yes (1) No (0)
1...255, step 1 Not Applicable
WO-EX (0), BAL-US (1), BAR-US (2) 0 (WO-EX)
1026...49150, step 1 0 (0), international network 1 (4),
international network 1026
national network 0 (8), national network 1 (12), not in use Not Applicable
(255)
Not supported (0), Supported (1) Supported (1)
1...4294967295, step 1, Signalling point code is not used
Not Applicable
(0)
1...120 s, step 1 s 5s
1...180 s, step 1 s 15 s
30...300 s, step 1 s 60 s
1...180
Not s, step
defined (0),1 Network
s originated configuration action (1), 15 s
Not Applicable
1...255,
Elementstep 1
Manager originated mass config action (5), NetAct -
Nokia Value O2 UK Value O2 UK Range for Optimisation

Not Applicable 2 (Rel4)
- Planning - Refer To CIQ
1024 Planning - Refer To CIQ
No (0) No (0)
Not Applicable Planning - Refer To CIQ
0 (WO-EX) 0 (WO-EX)
1026 1026
Not Applicable 8 (national network 0)
Supported (1) Supported (1) Changed to 1 (Supported) for rollout of SRNS Reloc
5s 5s
15 s 15 s
60 s 60 s
15 s 15 s
Not Applicable Not Applicable

- 1
10793
38042
38205
38206
12342
12343
12344
RENokia- IuBar ingRecoveryTimer(Iuservicebaringrecoverytimer) OperationalChange.htm 10939
ed) for rollout of SRNS Relocation July 2009 10822
12345
10750
10868
10919
10985
10888
Frequency
Extended Discrepancy Daily
Daily
Daily

Extended Discrepancy Monthly

New in RU30
New in RU40
New in RU40
New in RU40
New in RU50 EP1
4.5
9.0
4.5
4.5
8.0
4.5
4.5
4.5
4.5
4.5
4.0
4.5
9.0
4.5
4.5
4.5
4.5
4.5
8.0
IUCSIP Parameters
Abbreviated Name
DestIPAddressCS
IPNetmaskCS
IPBasedRouteIdCS
IPQMIdCS
IUCSIPId
O&M Parameters
IUCSIPChangeOrigin
s
IP address for the IUCS destination subnet IUCSIP Transmission

IP netmask for the IUCS destination subnet IUCSIP Transmission
IP Based Route Identifier for IUCS IUCSIP Transmission
IPQM object id for IuItemCS IUCSIP Transmission
IUCSIP Identifier IUCSIP Transmission
Change origin IUCSIP O&M

IPNetmaskCS parameter forms a destination IP
The
subnetIPNetmaskCS
definition forwith the the
Iu-CSDestIPAddressCS
user plane
attribute
connections. forms Thea destination
RNC performs IP subnet
the IPdefinition
Based Route for
the Iu-CS user
id reference plane connections.
selection for the new Iu-CS The RNC connection
performs
in between thethe
IPdestination
Based Route id reference
IP subnet and the selection
for the new IP
destination Iu-CS connection
address in between the
(RANAP:Transport Layer
destination
Address) that IP is
subnet
receivedandat the
thedestination
RAB assignment IP address
(RANAP:Transport
request. Layer Address) that is received
at the RAB assignment request.
There has to be at least one IP Based Route id
There
referencehastowards
to be at aleast oneCN
certain IP Based
element. Route id of
In most
Description
reference
the cases towards
one IP Based a certain CNinstance
Route element.reference
In most ofis
the cases
enough andonetheIPdestination
Based Route instance
IP subnet can reference
be set is
enough
simply toand the destination
0.0.0.0/0. IP subnet
The configured can be Route
IP Based set
simply to 0.0.0.0/0.
id reference is then The configured
selected for anyIPIPBased address Route
id reference
signalled by is
thethen
CN selected
and therefor is any
onlyIP oneaddress
IUCSIP
signalled by theneeded
object instance CN andunder there the
is only
IUCS oneobject
IUCSIP
object
instance.instance
Example needed
IPv4: under
0.0.0.0 the/ 0IUCS
-> IP object
Based
The IPQM identification gives the reference to the IPQM object used for the CS CN. The IPQM object defines the UMTS tr
The IPBasedRouteId
instance.
Route id x.Example IPv4: refers to the
0.0.0.0 logical ->
/ 0.0.0.0 IP IPBased Rou
Based
This Route
parameter id x.
is
This
In caseparameter
that severalis used only with
theIPidentifier
Based Route forCN nodes
thereferences
IUCSIP that use the IP over Ethernet as transmission technology.
object
are
containing
In case that
needed Destination
several
towards IP IP
a certain addresses
Based Route for
CN element thesubnet
references
the are
IuItemCS.
needed towards a certain
specific references can beCN element
added the subnet
with configuring
specific
several
This references
IUCSIP
parameter can the
objects
defines be
underadded with
the of
origin theconfiguring
IUCS. Example
last
several IUCSIP
IPv4: IUCSIP#1
configuration objects
192.168.0.0
action under/the
affecting the IUCS.
28 object.
-> IP BasedExampleRoute
IPv4: IUCSIP#1192.168.0.16
id y, IUCSIP#2 192.168.0.0 / 255.255.255.240
28 -> IP Based Route ->
IP Based Route id y, IUCSIP#2 192.168.0.16 /
id z.
255.255.255.240 -> IP Based Route id z.
This parameter is used with IP over Ethernet Iu-CS
This parameter
connectivity is used
in cRNC andwith IP overInEthernet
mcRNC. case of Iu-CS
I-
connectivity
HSPA the parameterin cRNC is and mcRNC.
always usedInfor case
theof I-
Iu-CS
HSPA the parameter is always used for the Iu-CS
connectivity.
connectivity.
7...15 characters Not Applicable

7...15 characters 0.0.0.0
1...4095, step 1, IP transport is not used (0) 0
0...8, step 1 0
1...255, step(0),
Not defined 1 Network originated configuration action (1), Not Applicable
Not Applicable
Not Applicable 0.0.0.0

0.0.0.0 0.0.0.0
0 20
0 1
Not Applicable 1

Frequency


New in RU30
New in RU30
New in RU30
New in RU30
New in RU30
New in RU30
New in RU50 EP1
9.0
9.0
8.0
IUO Parameters
Abbreviated Name
Admission Control Parameters

ICROperatorId
ICRPLMNid - MCC
ICRPLMNid - MNC
ICRPLMNid - MNCLength
ICROperatorName
Telecom Parameters
CS_T3212
CSCNDRXLength
IubTransportSharingInd
NRILengthForCSCN
NRILengthForPSCN
NullNRIForCSPool
NullNRIForPSPool
OperatorWeight
PLMNid - MCC
PLMNid - MNC
PLMNid - MNCLength
PS_NMO
PSCNDRXLength
SharedAreaPLMNid - SharedAreaMCC
SharedAreaPLMNid - SharedAreaMNC
SharedAreaPLMNid - SharedAreaMNClength
O&M Parameters
IuBarringDelayTimerCS
IuBarringDelayTimerPS
IuBarringRecoveryGroupCS
IuBarringRecoveryGroupPS
IuBarringRecoveryTimerCS
IuBarringRecoveryTimerPS
IUOChangeOrigin
IUOId
ICR Operator Identifier IUO AC

Mobile Country Code IUO AC
Mobile Network Code IUO AC
Mobile Network Code Length IUO AC
ICR Operator Name IUO Identification
T3212 IUO Telecom

CN CS domain specific DRX cycle length IUO Telecom
Iub Transport Sharing index IUO Telecom
NRI length for CS Core Networks IUO Telecom
NRI length for PS Core Networks IUO Telecom
Null NRI value for CS Pool IUO Telecom
Null NRI value for PS Pool IUO Telecom
Operator Weight IUO Telecom
Mobile Country Code IUO Telecom
Mobile Network Code IUO Telecom
Mobile Network Code Length IUO Telecom
Network Mode of Operation IUO Telecom
CN PS domain specific DRX cycle length IUO Telecom
Shared area Mobile Country Code IUO Telecom
Shared area Mobile Network Code IUO Telecom
Shared area Mobile Network Code Length IUO Telecom
Iu Barring Delay Timer for CS IUO O&M

Iu Barring Delay Timer for PS IUO O&M
Iu Barring Recovery Group for CS IUO O&M
Iu Barring Recovery Group for PS IUO O&M
Iu service barring recovery timer for CS IUO O&M
Iu service barring recovery timer for PS IUO O&M
IUO Change Origin IUO O&M
IUO Identification IUO O&M
Identifier of the operator for the Inter Circle Roaming 1 to 5, step 1 (255, not defined)
feature.
This parameter The operator defines could the uniquebe either a host
country 0...999, step 1, Not defined
operator
identification. who owns
MCC the
consists RAN, of or roaming
three digits. partners
MCC (65535)
This
who parameter
have entered defines
inidentifies
to ICR the unique agreement network with the host 0...999, step 1, Not defined
together
identification with MNC
within a country. theMNC PLMN uniquely
operator.
This parameter
(globally). defines whether 2 orconsists3 digits of aretwo (65535) 2 digits (2), 3 digits (3)
or three digits. MNC together
used in Mobile Network Code. When this parameter with MCC identifies
the PLMN uniquely
is modified, also the(globally). value of MNC used by system
This parameter
is always changed.. gives the operator a name of the 0 to 15 characters
corresponding ICR operator. The operator could be
either a host operator who owns the RAN, or
The
roamingtimeout partners value,who in decihours
have entered (6 min), in tofor ICR periodic 0...255 decihours, step 1
location
This
agreement
The DRX cycleupdating.
parameter with length Given
defines
host operator. only for
weight the
is used for the CN domain operator
the CS
value domain.
of each to decihours
640 inmsMulti-Operator
(6), 1280 ms (7),Core Network (MOCN). Operator weight is use
2560
(Part
count of the
paging CS domain
occasions specific
for discontinuous NAS System reception. ms (8), 5120
With Iub
information
Weight isTransportin SIB1).
divided Solution
among all for Network
operators Sharing
like: Disabled (0), ms
WBTS(9) -
This
feature parameter
operatordefines is given
may define separately PLMN(in for the
id bits)
specific CS IPBasedRouteId
This
domain parameter
and the PSand domain. the length of the 0...10 bits, step 1or TQMId (1),
bits
transport
The
OP1
NRI value
60
parameter resource
0 is used for transport
an infinite priority
timeout allocation.
value, that WBTS - IPBasedRouteId2 or
(The
This
PLMN duration
parameter
id specific ofto beDRX
the
defines
transport
used inlength
thecycle theisCS
resource 2(in CN
<power>
bits)
index
selection.
of k the 0...10
the
within TQMId2 bits,
(2),step 1 bits
WBTS -
is,
OP2 periodic
frames, 50 location
whererefers "k" updating
is to the used isDRX not used.
cycle lengthRoute IPBasedRouteId3 or TQMId3 (3),
NRI
IUO parameter to be used inMSC the PS CNBased selection.
Noteinstance
OP3
This 40
parameter
that this
coefficient for defines
parameter
CN.)
WBTSthe
is visible object only IP
allocated when NRI CS 0...1024, step 1
and
This
Thus
value TQM
licensesparameter
the
to be identifiers
actualused
of IuFlex is part
weight
in in
load
and/or the
of value following
System used
redistribution.
Multi-Operator inmanner:
Information
loadThe sharing
CoreNRIRNC'sBlock WBTS - for
calculation IPBasedRouteId4
e.g. OP1 would or be individual weigh value divided by sum
This parameter
IuOperator => is part
defines
NRILengthForPSCN ofthe System SGSNInformation allocated Block 0...1024,
TQMId4 step 1
(4)
1.
NAS
Network
1. node selection
is/are activated. function When uses none load of balancing
the licenses in
value
IUO to be used in load redistribution. The RNC's
- weight
IubTransportSharingInd 0...100 %, step 1 % are 0, it means this one operator is the default
In-case
If the
routing of MOCN
for all value all
is operators
theparameter
UEs greater
usingvalue than
Null must is0 define
for one the operator and all other operators
is
NAS
Note
-
activated,
Enum node
that this
value
the
selection
parameter
0: Feature function isdisabled usesNRI.
visible onlyhandled
load
for balancing
when
the PLMN
as
PS0idin in/
same
L3
As SW.
Unique value
per 3GPP country of T3212
theidentification.
UE and
may in
beNull case
MCC
attached of either
consists
toCore MORAN
of three 0...999, step 1, Not defined
different
routing
licenses
Operator forof all IuFlex UEs
and/or using Multi-Operator NRI.
(without
NOTE:
digits.
CN MCC
domains MOCN
Null NRI
together
with at
valuethewith
different same
cannot MNC
CN time)
be or MORAN
given
identifies
domain to the
specificanyPLMN with
MSC
DRX (65535)
Network
Unique
- Enum
Flex
of the IU,pool. is/are 1:
network
value
T3212 activated.
canidentification
WBTS be - When
operator within
IPBasedRouteId nonecountry.
specific of parameter.
theorlicenses
MNC
TQMId 0...999, step 1, Not defined
uniquely
cycle
NOTE:
is lengths.
activated,
consists Null(globally).
of NRI
the
two The
or valueUE
parameter
three shall
cannot
digits. store
value be
MNC each
given
is handled CN
to
together anydomain
as SGSN
with0 in (65535)
- Enum
NOTE:
This parametervalue
Operator 2: WBTS
cannot
defines -
haveIPBasedRouteId2
whether same 2 or null-NRI
3 domain
digits are orasthe 2 digits (2), 3 digits (3)
specific
of
L3
MCC the
SW.
TQMId2 DRX cycle
pool.
identifies the length
PLMN for each
uniquely CN
(globally).
others.
used
UE in Mobile
is attached Network Code.
In Operation
- Enum valueMode 3:toWBTS
and I, ituse the shortest
is- possible
IPBasedRouteId3 to have of those or DRX Network Mode of Operation I (0),
combined
cycle
NOTE:
CS
TQMId3and lengths.
Operator
PS side cannot
paging have
via SGSN. same Innull-NRI
Operation as Network Mode of Operation II (1)
The
When
In-caseDRX this
of cycle
parameter
MOCN length isispaging
all operators used for
modified must thedefine
also CNthe domain
value
the ofto 640 ms (6), 1280 ms (7), 2560
others.
Mode
- Enum II, the
value combined
4: WBTS - procedure
IPBasedRouteId4 is not
or
count
MNC
same
The paging
used
value
parameters byofoccasions
system
DRX Shared is for
cycle always
area discontinuous
length mobilechanged.
andattach in case
country reception.
of
code ms (8), 5120
0...999, step 1,msNot
(9)defined value
possible
TQMId4
This parameter (and neither
is given are combined
separately for the CS
either
and MORAN
Shared area (without
mobile MOCN
network at codethe same
compose time)the or
procedures).
The
domain parameters
and Used
the only
Shared
PS domain. for
area themobilePS domain.
country NMO codeis (65535) 0...999, step 1, Not defined value
MORAN
identifier
part of
Example: the with
of PS a
Forarea Flex
PLMN
CN
the IU,
domain
PLMN to DRX
whichid cycle
the
specific
x within length
subscribers
NAS
IUO can
System
instance beof the y (65535)
and
(The
The Shared
duration
parameter of mobile
the
defines DRX network
cycle
whether is code
2 or2 <power>compose
3 digits are k the 2...3, step 1
operator
partner
information
enum value specific
operator in System
2PLMN
has parameter.
canbeen have
Information
set. access.
For the Block
user1. plane
identifier
frames,
used in the of a
where shared"k" is to
areathe which
used
mobile the
DRX subscribers
network cycle length
code. of the
In-case
transport
partner
coefficient ofbearer
operatorMOCN
for CN.) all operators
setup
can havehaving access. must
the define the
matching PLMN id
same
allocation value of NMO
system chooses
isthis and
partparameter,
ofthe in
System case
IP Based of either
Route
Information MORAN
id Block
This
When parameter
modifying defines delayalso thatthe takes value placeof 0...10800 s, step 10 s
(without
reference
1. MNC MOCNfrom theat theWBTS same time) or MORAN
- IPBasedRouteId2 with
before
the
This the
parameter Iu
used linkby state
the
defines change
system
the will delayis is handled
always when
changed. the
Flex IU, NMO
attribute.
Iu-CS (only) Similarly can
service
be operator
TQMId2becomes bethat
specific selected
unavailable.
takes
parameter.ifplace
the Iub 0...10800 s, step 10 s
before
Transport the Iu
QoS link state
feature change is handled when Iu- 1...50, step 1
This
The parameter
UE shall store defineseachisthe CNconfigured.
amount
domainofspecific Thus
cellsthe toDRX given
which
PS
IP
the (only)
Based
SIB service
Route
information becomes
definition is unavailable.
used for the PLMN x
cycle
The length
parameter eachisCN
for defines updated
the domain
amount simultaneously
theofUE cells is to after 1...50, step 1
attached
which
related
IuCS
to and link call
use setups.
recovery.
the shortest When of an
those IuCS DRX fails,cyclethe related
lengths.
the
The SIB information
parameter defines is updatedthe timer simultaneously
to phase the after 0...120 s, step 1 s
CN
the service
In-case
IuPS oflink isrecovery.
MOCN barred byWhen
all operators sending an mustthe
IuPS system
define
fails, the
the
Note: The
system
information first
information IP Based
messages message to Route
the identifier
sending
UEs inafter(WBTS IuCS -link
same
The
related value
parameter
CNWhen of DRX
service defines cycle the length
timer towithout
and phase case the
the failed
of 0...120 s, step 1 s
IPBasedRouteId)
recovery.
service
either CN
MORAN domain. an oris
(without TQM
IuCS barred
When MOCN object
link the
by
fails, sending
identifier
failed
at the
the link
the
related
same is (WBTSsystem
CN
time) -
or
system
information
This information
parameter messages defines message to the
thesetup sending
UEs
origin without
ofmessagesafter
thethe last theIuPS failedlink
TQMId)
service
recovered,
MORAN
recovery.
service
is
CN
iswithselected
barred
When the Flex
domain. anbyIU,
system for
sending
IuPS
When
the
information
DRX link the
cycle
the fails,
failed
when
system
length
thelink can
related
PLMN
information
is Route beare id Not defined (0), Network
CN
configuration
is not
messages
sent
operator known
again to
with action
or
the when
theUEs affecting
the
without
recovered referred the
the
service object.
IP
failed Based
CN service
domain CN originated configuration action
This
service
recovered, isspecific
parameter barred
the system parameter.
isbythe identifier
sendinginformation the forsystemthe Iu information
messages Operator areis 1...255, step
(1), NetAct
1
RNW plan originated
attribute
domain.
information.
information is
When hasThe unspecified
the failed
system link value.
informationis The
recovered, PLMN
messages the id are
messages
sent again to
with thethe UEs without
recovered the
service failed CN service
domain CN
not known
system
sent simultaneously with
information MOCN messages
to feature
the number within
are sent
of the initial
again
cells RRC configuration action (2), Element
with
defined
domain.
information. When The the failed
system link
informationis recovered, the
connection
the recovered setup servicewhenCN the RAB
domain hasmessages
not been The are Manager originated configuration
by
sent the
system given
information
simultaneously parameter messages
to the and number are information.
sending ofiscells
sent phased
again with
defined
established
system
according information yet.
to parameter sending
IuBarringRecoveryTimer is phased according to action (3), Configuration action
the
by
the
recovered
the
given given parameter
service CN
to and
avoid
domain
sending
the high isparameter
information.
phased
load of
The
the by automatic tuning function (4),
avoid
system
according the high
information
to the load of the simultaneous
sending
IuBarringRecoveryTimer is phased according network
parameter to Element Manager originated
simultaneous
access attempts network access attempts by the UEs.
the given
to avoid the high by
parameter load the UEs.
toofavoid the high load network
the simultaneous of the mass config action (5), NetAct
simultaneous
access attempts network by theaccess UEs. attempts by the UEs. originated direct RNW change (6)
IUO-ID 1
255 255 255

65535 65535 65535
65535 65535 65535
2 (2) 2 (2) 2 (2)
0 0 0
0 decihours 0 decihours 30 decihours

640 ms (6) 640 ms (6) 640 ms (6)
Disabled (0) Disabled (0) Disabled (0)
0 0 7
0 0 5
1024 (Null NRI is not used) 1024 (Null NRI is not used) 127
1024 (Null NRI is not used) 1024 (Null NRI is not used) 1024 (Null NRI is not used)
0% 0% 0%
65535 65535 234
65535 65535 10
2 digits (2) 2 digits (2) 2 digits (2)
Network Mode of Operation II (1) Network Mode of Operation II (1) 1 (Network Mode of Operation II)
640 ms (6) 640 ms (6) 640 ms (6)
65535 65535 65535
65535 65535 65535
2 2 2
0s 0s 0s
0s 0s 0s
20 20 20
20 20 20
3s 3s 30 s
3s 3s 30 s
Not applicable Not applicable Not Applicable
Not applicable Not applicable 1
O2 UK Range for Optimisation Comments Classification
Frequency




New in RU30
New in RU31
New in RU32
New in RU30
New in RU30
New in RU30
New in RU30
New in RU30
New in RU30
New in RU30
New in RU30
New in RU30
New in RU30
New in RU30
New in RU30
New in RU30
New in RU30
New in RU30
New in RU40
New in RU40
New in RU40
9.0
New in RU40
New in RU40
New in RU40
New in RU40
New in RU40
New in RU40
New in RU40
New in RU40
IUPS Parameters
Abbreviated Name
Telecom Parameters
CellFACHRelocSupport
CNDomainVersion
CNId
DefaultCN
IUPSId
IuState
NetworkInd
PSCNNRI - NRIMaxForPSCN
PSCNNRI - NRIMinForPSCN
PSFlexiIuWeight
RelocationSupport
SignPointCode
TDataFwd
TigOR
TinTR
TRafC
TRatC
O&M Parameters
IUOIdentifier
IUPSChangeOrigin
rs
Full Name Managed Object
Cell_FACH state Serving RNC Relocation Support IUPS

Release version of Core Network IUPS
Core Network Identity IUPS
Default Core Network IUPS
IuPS Interface Identifier IUPS
State of Iu interface IUPS
Network indicator IUPS
Maximum value of NRI range for PS Core routing IUPS
Minimum value of NRI range for PS Core routing IUPS
PS Flexible Iu Weight IUPS
Serving RNC Relocation Support IUPS
Signalling point code IUPS
T DataFwd IUPS
TigOR IUPS
TinTR IUPS
TRafC IUPS
TRatC IUPS
IUO Object Identifier IUPS

Change origin IUPS
Group Description
This parameter is used to identify if the CN node
is used as "a default CN node" when the Flexible
Iu feature is active.
This parameter provides Cell_FACH state
Telecom This
When
Serving parameter
this
RNC parameter describes
Relocation hasSupport the state
value 1 of of
(Yes),
thethe IuCore
the
PS core
This
The
interface parameter
code ofthat
the defines
uniquely
CN Node weight
identifies
connected valuethe of the
each
Release
to RNC.PS
network
Network node
node. is used as the default CN node. If
Telecom CN
version node
Theparameter of (Iu
the
parameterhas interface)
Core
is given for
Network Flexible
connected Iu feature
to the load
the valueto0every (No), CN it is Node
not used as
sharing.
RNC.
connected FlexiIuWeight
to RNC.isIt used forby thetheweighted
Telecom the
This default
parameter CNthe node.
describes istheused
Core Network NASIdentity
round
node robin method
selection function to select
in load a CN node
balancing to
This parameter is needed for each definedand IUCS
Telecom balance
routing
This the
decisions.
parameter load between the available CN
and IUPS objectdefines
(max. 16 theCS core
+ 16 network
PS). object
Telecom nodes.
Network
The Load
indicator
id. It descriptions
contains sharing of parameter
ofdefines
connection the Iusettings
nodes
the istowards
signalling defined
values: aby
network
configuring
This
to parameter
which FlexiIuWeight
theoperator indicates
signalling of the
thebelongs. interface.
maximum value of
Telecom certain
If for SGSN.
some thepoint DefaultCN parameter of
The
the
-one weight
NRI
WO-EX value value
= range
working used that in isload
normally, usedsharing
in
Default the decision
PS CN is
This or several
parameter CN nodes
indicates has been
the minimum configured
value ofto
Telecom weight
selection.
The
-value value
parameter
BAL-US of CN
is notnode divided
modifiable ifbythesumcore of all
the NRIYes
value ,=Flexible
barred
range from
IU load
that isloadused balacing
balancing
indomain
the PS only
function
CNone
Telecom -weight
network values
is active.
BAR-US
for that
selection. operator
ofbarred
= CN nodes
isParameter
executed fromfor allthe
modification
onlyconnections
between those
of
operator.
NOTE: NRIMinForPSCN
terminates
CN nodes ongoing
which have calls.theand NRIMaxForPSCN
DefaultCN parameter
Telecom User
can
Note:
The divides
be configured
IUPS
code weights
object
identifies to
cannot
the among
have the
be
signalling all CN
same
deleted nodes
pointvalue,
unless
in theof the
the
signalling network.
set
NOTE:to Yes.
NRIMinForPSCN and NRIMaxForPSCN
domain/operator
indicating
IuState
Combination one
parameter of NRI forof example
value
NetworkIndthe instead
objectandlike of
has this:
value
value
SignPointCode range.
BAR- uniquely identifies a Signalling Point.
Telecom can be configured to have the same value,
SGSN1
The
This 60
US. parameter
parameter is not
identifies modifiable
whetherifofthe corerange.
Core network is active. Parameter modification terminates ongoin
Telecom indicating
SGSN2 one NRI value instead value
Network50 supports the relocation of SRNC or not.
Telecom SGSN3 40
This
Thus the actual is
parameter a timer
weight value which used is used
in load to sharing
Telecom determine
The timer when
is set the
when additional
an
calculation for e.g. SGSN1 would be individual RANAP:SRNSlevel of traffic
Data Forw
reduction
weightimer
This value in Core
is divided Network
used to by overload
sum of weight
determine when the should
values, take
Core 60/
Telecom
place. When
(60+50+40)=0.4 this timer
Network overload can be considered to be is running, all OVERLOAD
Telecom messages
If the weight orvalue
signalling
is point
identical congested
for all the CN RNC nodes,
cleared. When
This parameter this timer
specifies is
the running,
maximum time for is it
Telecom information
means
not that the
allowed received
to by
equal load
increase the RNC
is shared
traffic. areamong
ignored. all
This
Resetparameter
procedurespecifies in the RNC. a guard period in the
CN nodes. If the weight value is default value (0)
Telecom RNC before sending an RANAP:RESET
for this node, it means that this node is not used
ACKNOWLEDGE message.
for
Theload
IUOsharing.
identification gives the reference to the
O&M IUO object used for the CBCI. The IUO object
The parameter
contains Iu Operator defines the origin of the last
information.
O&M
configuration action affecting the object.
Not supported (0), Supported (1) 1 (Supported)

R99 (1), Rel4 (2), Rel5 (3), Rel6 (4), Rel7 (5), Rel8 (6), Rel9
Not applicable
(7), Rel10 (8), Rel11 (9), Rel12 (10)
0...4095, step 1 -
No (0), Yes (1) 0 (No)
WO-EX (0), BAL-US
international network (1), BAR-US
0 (0), (2) network 1 (4),
international 0 (WO-EX)
national network 0 (8), national network 1 (12), not in use Not applicable
(255)
0...100, step 1 0
1...4294967295, step 1, Signalling point code is not used (0) Not applicable
1...10 s, step 1 s 4s
1...120 s, step 1 s 5
1...180 s, step 1 s 15
30...300 s, step 1 s 60
1...180 s, step 1 s 15
Not defined (0), Network originated configuration action (1),
NetAct
1...255,RNW
step 1plan originated configuration action (2), -
Not applicable
Nokia Value O2 UK Value O2 UK Range for RF Tuning
1 (Supported) 1 (Supported)
Not applicable Rel4 (2)
- Planning - Refer To CIQ
0 (No) No (0)
Not applicable Planning - Refer To CIQ
0 (WO-EX) 0 (WO-EX)
Not applicable national network 0 (8)
1 (Supported) 1 (Supported)
Not applicable Planning - Refer To CIQ
4s 10 s
5 5s
15 15 s
60 60 s
15 15 s
- 1
Changed to 1 (Supported) for rollout of SRNS Relocation July 10650

10816
38210
12377
12378
10894
38335
38336

10713
Changed to 10 s for rollout o NWP 10938
10735
10908
10984
10709
Frequency


Daily
Daily

Daily

New in RU40
New in RU40
New in RU40
New in RU50 EP1
4.0
4.5
9.0
4.5
4.5
4.5
4.5
4.5
4.5
8.0
4.0
9.0
4.0
4.5
4.5
4.5
4.5
8.0
4.5
IUPSIP Parameters
Abbreviated Name
DestIPAddressPS
IPNetmaskPS
IPBasedRouteIdPS
IPQMIdPS
IUPSIPId
O&M Parameters
IUPSIPChangeOrigin
ers
IP address for the IUPS destination subnet IUPSIP Transmission

IP netmask for the IUPS destination subnet IUPSIP Transmission
IP Based Route Identifier for IUPS IUPSIP Transmission
IPQM object id for IuPS IUPSIP Transmission
IUPSIP Identifier IUPSIP Transmission
Change origin IUPSIP O&M

Description
The DestIPAddressPS attribute with the

The IPBasedRouteId
IPNetmaskPS parameter refers to the
forms logical IP Based
a destination IP Route entity configured in the IP layer with MML/SCLI or via the IP Plan
The IPNetmaskPS with the DestIPAddressPS
subnet
The IPQM
attribute definition for
identification
forms the
a destinationIu-PS user
givesIPthe plane
reference
subnet to the
definition forIPQM object used for the PS CN. The IPQM object defines the UMTS tr
Note: The IUPSIP
connections (GTP parameters
tunnels). The areRNCconfigured
performs with IP over Ethernet transport option. In addition the IUPSIP configuration is
the Iu-PS user plane connections (GTP tunnels).the
IP
TheBased
Note RNC Route
for IPA-RNC:
performs id reference
This selection
parameter
the IP Based for
id the
is configured
Route newwhen the IP over Ethernet transport option (NPGE) is used and when the
reference
Iu-PS connection
selection for the in
new between
Iu-PS the destination
connection in IP
between
This
subnet parameter
and the IP is the identifier
destination for the IUPSIP object
IP address
the destination
containing subnetIPand
list of SGSN the destination
address and isnetmask IP
(RANAP:Transport
address (RANAP:Transport Layer Address)
Layer that
Address) received
that is
definitions
at the RAB that use
assignment a certain IP
request. Based Route id at
received
This
the RNC at
parameter
end.the RABdefines assignment
the originrequest.
of the last
configuration action affecting the object.
There
There has
has to to be
be atat least
least one
one IPIP Based
Based RouteRoute id id
reference
reference towards a certain CN element. In
towards a certain CN element. In most
most ofof
the
the cases
cases oneone IP IP Based
Based Route
Route instance
instance reference
reference is is
enough
enough and and thethe destination
destination IP IP subnet
subnet can can bebe set
set
simply
simply to to 0.0.0.0/0.
0.0.0.0/0. The The configured
configured IP IP Based
Based Route
Route
id
id reference is then selected for any IP address
reference is then selected for any IP address
signalled
signalled by by thethe CNCN andand there
there isis only
only one
one IUPSIP
IUPSIP
object
object instance
instance neededneeded under
under the the IUPS
IUPS object
object
instance.
instance. Example
Example IPv4: IPv4: 0.0.0.0
0.0.0.0 // 0 -> IP Based
0.0.0.0 -> IP
Route id x.
Based Route id x.
In
In case
case that
that several
several IP
IP Based
Based Route
Route references
references are
are
needed
needed towards
towards aa certain
certain CN
CN element
element thethe subnet
subnet
specific
specific references
references can
can be
be added
added with
with configuring
configuring
several
several IUPSIP objects under the IUPS.
IUPSIP objects under the IUPS. Example
Example
IPv4:
IPv4: IUPSIP#1
IUPSIP#1 192.168.0.0
192.168.0.0 // 28 -> IP Based Route
255.255.255.240 ->
id
IP y, IUPSIP#2
Based Route192.168.0.16
id y, IUPSIP#2/ 28 -> IP Based /Route
192.168.0.16
id z.
255.255.255.240 -> IP Based Route id z.
Note:
Note: ThisThis parameter
parameter is is configured
configured in
in the
the following
following
cases:
cases:
-- IPIP over
over Ethernet
Ethernet transport
transport option
option with
with cRNC
cRNC
NPGE,
NPGE, mcRNC
mcRNC and and I-HSPA
I-HSPA
-- IP
IP over
over ATM
ATM option
option with
with an
an cRNC/NPS1
cRNC/NPS1 basedbased
network interface
network interface
-- Always
Always used
used with
with I-HSPA
I-HSPA Iu-PS
Iu-PS configuration
configuration
As
As an exception the parameter is
an exception the parameter is not
not used
used with
with
cRNC GTPU/NIS HW based Iu-PS
cRNC GTPU/NIS HW based Iu-PS interface. interface.
7...15 characters Not Applicable

7...15 characters 0.0.0.0
1...4095, step 1, IP transport is not used (0) 0
0...8, step 1 0
Not defined (0), Network originated configuration action (1), Not Applicable
(NetAct RNW plan originated configuration action (2),

0.0.0.0 Planning - Refer To CIQ
0 1
Not Applicable 1

Frequency


New in RU30
New in RU30
New in RU30
New in RU30
New in RU30
New in RU30
New in RU50 EP1
9.0
9.0
9.0
9.0
8.0
IUR Parameters
Abbreviated Name
AAL2PTSigForIur
AppAwareRANEnabled
CellFACHnRncRelocSupport
DCHSDPAOverIurEnabled
DelayThresholdMaxIur
DelayThresholdMidIur
DelayThresholdMinIur
DSCPHighIur
DSCPLowIur
DSCPMedDCHIur
FRLCOverIurEnabled
HSDPA64QAMOverIurEnabled
HSDPACCEnabledIur
HSDPAULCToDSCPIur
HSPAOverIur
HSUPACCIurEnabled
HSUPADLCToDSCPIur
IBTSSharing
InterfaceMode
IPBasedRouteIdIur
IURId
IurUPSupport
MaxFPDLFrameSizeIur
MaxIurNRTHSDSCHBitRate
MinUDPPortIur
NeighbouringPLMNid - MCC
NeighbouringPLMNid - MNC
NeighbouringPLMNid - MNCLength
NeighbouringRNWElement
NRncId
NRncNetworkInd
NRncRelocationSupport
NRncSignPointCode
NRncVersion
OverbookingSwitchIur
ProbabilityFactorMaxIur
RNSAPCongAndPreemption
ToAWEOffsetNRTDCHIP
ToAWEOffsetRTDCHIP
ToAWSOffsetNRTDCHIP
ToAWSOffsetRTDCHIP
O&M Parameters
IURChangeOrigin
s
AAL2PT signalling for Iur IUR Transmission

Application Aware RAN Enabled IUR Transmission
Cell_FACH state Serving RNC Relocation Support IUR Transmission
DC-HSDPA Over Iur Enabled IUR Transmission
Maximum Threshold for HSUPA congestion handling delay IUR Transmission
Middle Threshold value for HSUPA congestion delay IUR Transmission
Minimum Threshold value for HSUPA congestion delay IUR Transmission
DSCP high priority for Iur IUR Transmission
Low priority DSCP for Iur IUR Transmission
DSCP medium priority on R99 DCH for Iur IUR Transmission
Flexible RLC Over Iur Enabled IUR Transmission
HSDPA 64QAM Over Iur Enabled IUR Transmission
HSDPA Congestion Control activation Iur IUR Transmission
HSDPA UL FP Control traffic to DSCP mapping Iur IUR Transmission
HSPA over Iur IUR Transmission
Enable HSUPA Congestion Control on Iur IUR Transmission
HSUPA DL FP Control traffic to DSCP mapping Iur IUR Transmission
IBTS Sharing IUR Transmission
Configure the IUR in a special mode IUR Transmission
IP based route identifier IUR Transmission
Iur Interface Identifier IUR Transmission
User Plane support of Iur connection IUR Transmission
Maximum FP downlink frame size Iur IUR Transmission
Maximum NRT HS-DSCH MAC-d flow bit rate over Iur IUR Transmission
Minimum UDP port value IUR Transmission
Mobile Country Code IUR Transmission
Mobile Network Code IUR Transmission
Mobile Network Code Length IUR Transmission
Type of the Neighbouring RNW Element IUR Transmission
Neighbour RNC identifier IUR Transmission
Network indicator of neighbour RNC IUR Transmission
Serving RNC Relocation Support of neighbour RNC IUR Transmission
Signalling point code of neighbour RNC IUR Transmission
Release version of Neighbouring RNC IUR Transmission
Overbooking Switch Iur IUR Transmission
ProbabilityFactor for Congestion Indication sending IUR Transmission
RNSAP Congestion And Preemption IUR Transmission
ToAWE Offset for NRT DCH connections over IP IUR Transmission
ToAWE Offset for RT DCH connections over IP IUR Transmission
ToAWS Offset for NRT DCH connections over IP IUR Transmission
ToAWS Offset for RT DCH connections over IP IUR Transmission
Change origin IUR O&M

Description
This parameter defines whether the feature
Application Aware RAN is enabled or not in the
corresponding Drift RNC.This parameter value is
checked
AAL2 Path onlyType when (ITU-T the serving
Q.2630.2) HSDPA/HSPA
signaling cell
is
within under theDrift ALCAP RNC.ERQ over the Iur interface can
Dynamic
be controlled service withorthis application
attribute. prioritization
The AAL2 PT for
the
signalingHSDPA can scheduling
be controlled
This parameter provides the Cell_FACH state is applied
per over
neighbor Iur towards
RNC.
a
This corresponding
Serving parameterRNC Drift RNC
defines the ifmidpoint
this parameter threshold value
The DSCP
This parameter forRelocation
the definesNRT HSPA theSupport
Maximumtraffic of (UMTS
the Threshold TC:
is
value set
neighbour to Enabled.
for HSUPA RNC. congestion handling in an Iur +
Interactive,
This
value parameter
for HSUPA background)
defines
congestion theat Iurminimum interface. threshold
This
By enabling
Iub parameter
(DRNC) thisenables/disables
delay parameter
case in theit handling
isSRNC the role.
interpretive in a IfIur
DC-HSDPA so +
there
value
Iub
Over
that delayfor
Iur
all BTSs HSUPA
case.
usage If congestion
towardthere
under the Drift RNC are is
the delay
otherhandling>=RNC. in an
When
supporting Iur +
is
For
This
Iub delay
the
parameter
(DRNC) >= DelayThresholdMidIur
HSDPA delay user
definescase.traffic,
the theDRNC,
DSCP
If there is value
parameterallocation
delay and
>=is used
for
DelayThresholdMax
enabled
RAN2509
delay <SRNC on the
feature. SRNC
DelayThresholdMaxIur This value,
andparameterTNL
the CONGESTION
value, does thenot DC- have
at
the the
high
DelayThresholdMin
INDICATION
HSDPA
any affect
priority
may in the
role
control
be usedforvalue
traffic
drifting
theforIP
frame
over RNC.
the
andpacket
IPIur
reactive
the Iurand
delay < FP
marking
interface.
flag
E-DCHfrom
is always
higher data
entity
SRNC
(UMTS executes
to
DelayThresholdMid DRNC.
Traffic the
classes: Delay
value, Congestion
Conversational,
FP E-DCH Algorithm
R99
entity
sent.
rates
The
which may
DSCP be
determines (DSCP,achieved RFC2574)
whether over the for
Congestion Iur. the PS NRT
Indication
Streaming).
executes
R99 DCH the
trafficDelay (UMTS Congestiontraffic Algorithm
classes: which
is
For
Trafficsent
the
determines to
HSUPA
types the neighbor
user
allocated
whether Congestion RNS
traffic,
to the or
theDSCP not
parameter (proactive
high
Indication DSCP or
isis sent
Note:
Interactive,
reactive also flag parameter
Background).
can either IUR-be The
set DSCP
to the is
TNL applied at
primarily
value:
to the
MaxIurNRTHSDSCHBitRate
the transport usedbearer
neighbor atRNS the setup
SRNC
or notwith role
(proactive
may theand needIP signalled
flag
to
transport is set
be to
CONGESTION
DRNC
-to DCCH
the TNL over
on theDSCP
R99 INDICATION
RNSAP
DCH in the control
TNL QoS frame). IE. In the
modified
option and toCONGESTION
achieve
the higher
value INDICATION
data
is used rates forover IPcontrol
Iur.
packet
DRNC
-frame).
CS domainrole, the
trafficDSCP on
marking and to define the Per-Hop-Behaviour. signalled
R99 DCH over the RNSAP
is
- PS
This
This being
Traffic domain
parameter
parameterapplied
types by default
Streaming
provides
enables
allocated toclass
/the
the and
disables
the HSDPA
HSDPA
DSCP if notFlexible
traffic onpresent
highULR99 Frame
CongestionDSCP DCH
RLC at
RNSAP,
Protocol
Control
in DLparameter
value: Over the
Control given
for selected
Iur and parameter
traffic to DSCP
Iur connections.
other HSPA+ the value mapping
Over is used
If the at for
Iur related Iur the
This
HSUPA
interface. userThe trafficenables/disables
parameter IP packet is marking
primarily HSDPA
from
used atDRNC the
parameter
functionalities
-64QAM
PS domain value over is
Interactive set
the Iur. to Enabled,
andWhen Background the
this(Iur HSDPA
parameterclass
to
ThisSRNC.
parameterOver Iur usage
enables on
/ to the
disables RNC HS-DSCH
SRNC
congestion
is enabled
traffic onrole R99 and
oncontrol
SRNC
DCH signalled
is andactivated. DRNC,DRNC When over
Flexible the
it is set and
RLC to
interface).
E-DCH
RNSAP MAC-d When
inthere
thefor TNLflow this parameter
setup
QoS IE.over In the is DRNC
Enabled
Iur-interface role on
and the
the
Disabled,
may be used will not
HS-DSCH be anyover HSDPAIur. This
SRNC
After
the
DSCP servingand
modification,
signalled the
cell DRNC,
change
over the HSDPA
parameter
over
the RNSAP 64QAM is
Iur-interface applied
being for
applied
congestion
parameter control
must be handlings
Enabled in the
for using RNC for
DC-HSDPA the
modulation
the
by new
controlled
default andmay
transport
by the be
ifgiven utilized
bearer
Serving
not present RNC.over
setups. at RNC. Iur and
Serving
RNSAP, higher
RNC
this
BTS
Over under
Iur and the / or HSDPA neighbor 64QAM Over Iur. With
data
This
does rates
parameter
parameternot setup may
value be is achieved
provides
HS-DSCH used the the
for MAC-dover
HSUPA
the Iur.
HSDPA flow DLand Frame
FP E-
DC-HSDPA
This
Note: parameter
also theand HSDPA
enables
parameter 64QAM
IUR- HSUPA higher data
Congestion
Protocol
DCH
control
rates MAC-d
may Control
traffic flow
IP traffic
over
packet to DSCP
Iur-interface
marking mapping
from if HSPA
DRNC at Iur
over
to
Control
The forbe
IPBasedRouteId
MaxIurNRTHSDSCHBitRate E-DCH achieved Iur refers over to
bearers Iur.
may in
the the SRNC
logical
need to IPbe and
interface.
Iur
SRNC.
This is disabled.
parameter This parameter
is only in is
RN6.0 used at
2.0.This the SRNC
DRNC's
Based
modified
This Route
parameter Iub transport
to HSUPA entity
achieve indicates bearer.
configured
higher theIftraffic
if data inthe the
rates
Neighbouringparameter
IPoverlayer Iur.with
role for
parameter the allows FP control
configuration of the IP packet
interface to
value
The
MML
RNW user
oris set
via
Element planeto
IP Enabled,
Planframe
supports size
interface.the
I-BTS can
HSUPAThebe
Sharing limited
IP congestion
Based with
or not. Routethis
marking
the neighboring from SRNC RNC toinDRNC.
a way that deviates from
control
parameter is activated.
in order toWhen
configured for the Iur interface is used for theavoid it IP
is layer
set to Disabled,
3GPP
there
user andnot
fragmentation.
will
plane NokiabeThe
connections Siemens
any RNCHSUPA takes
towards Networks
congestion
the thevalue standards.
neighbour control
into
This
Note
handling
account parameter
that in such
in DLthe a
Userindicates
SRNC configuration
Plane for athe user
traffic mightplane
concerned
processing procedure
waste Iur RNC
and
This
support parameter
RNC element of the Iur identifies
controlling
connection. the IUR
the interfaceThis object unit and
information
resources
interface.
limits
containing
port the maximum
selection or
the compromise
neighbor
along HS-DSCH
with RNC
theits performance.
FP frame
specific
source IP size is
connection
address
given separately
accordingly. The for each
value has neighbouring
to be planned RNC.
settings.
and UDP
This parameter port selection.
defines This
the parameter
minimum UDP is applied
port
This
If theparameter
according
when
number parameter
the IP
that thedefines
to over
can is
minimum
be modified
Ethernet
allocatedtheIP maximum
online,
layer
transport
at call MTU bitalong
itoption
will
setup rate
not is of
for the
the
If
thethe
affect
path NRTuser
to the the plane
HS-DSCH
existing
DRNC isbearers
not
andMAC-d supported
BTS. flow
but The will overbetween
parameter
be Iur-interface
considered SRNC
is
used.
transport
and DRNC, bearer
initiation at the ofIur aATM interface.
soft handover The UDP
restricted
for
applied
port the new
related in bySRNCtothetheServing
establishments.
toRNC both RNC.
source This
andUDP IPparameter
Iur is
port
procedure
defines
interfaces. the is not
user possible.
bitrate of the NRT HS-DSCH
assigned by the system having the value selected
MAC-d
The
Unique
above IP flow
parameter's
and
country
the on RLC
UDP
specified header
value payload
identification.
minimumdoesoverheads level
notMCC
UDP affectexcluding
have
consists
port the tosystem
number. be
of
MAC-hs
behavior
subtracted
three digits. header,
unless
from
MCC RLC
the
HSPA IP
together header
interface
over Iur
with and padding.
functionality
MTU
MNC value
identifies (e.g.
is
Unique
enabled.
IPv4
This IP network
header
parameter 20identification
definesbytes, UDP
whether within
header
2 or country.
3the8digits
bytes) MNC
the
The PLMN
modified
consists of uniquely
two value
or (globally).
will be
three digits.applied MNC fortogether neware with
when
used
transportinadjusting
Mobile
bearers theand
Network value the since
Code.connections the parameter already
MCC
directly identifies the PLMN uniquely (globally).
admittedcontrols are notthe user plane FP frame size.
modified.
When
This this parameter
parameter indicates is modified
whether also
the the value of
neighboring
This
MNCparameter
used by system identifies the
is always neighbor
changed. RNC. A unique identification for an RNC node within the UTRAN.
Network
For RAN indicator2054 feature defines the signalling
"Extension of RNC network
ids" only, extended range of 4096..65534 will be used , otherwise older range 1..409
to which the signalling point belongs.
This parameter identifies whether a neighbouring
RNC supports the relocation of SRNC or not.
The code identifies the signalling point in the signalling network.
Combination of NRncNetworkInd and NRncSignPointCode uniquely identifies a Signalling Point.
The
The code thatdefinesuniquely identifies the Release version of the neighbouring RNC.
This attribute
parameter defines if the
theRAN1096
offset value Transport
to be Bearer Tuning feature is activated for scaling the Iur transport bearers logical tr
If the switch
added to theiscorresponding
turned on the RNW database Activity Factors are used for scaling the transport layer logical reservations accord
Once
This the
parameteractivity
This parameter defines
ToAWE_NRT_DCH_ttiXX factor or
defines the the feature
offset
theparameter
maximum value activation
to beThe parameter value is changed, the new value is taken into use for the newly esta
value.
probability
This
added
IP
of parameter
to thecan
transport
Congestion defines
corresponding the
be used sending
Indication offset
either in at value
thetheIurto orbe
maximum
This
added parameter
to the
ToAWS_RT_DCH_ttiXX
DRNC Iub indicates
corresponding
interface. The R99 if the
parameterneighbouring
DCH value. The
FP receiving RNCIP
allowed
supports Iur
3GPP+ IubRNSAP:
(DRNC) delay
Radio variation
Link amount.
Congestion
This parameter
ToAWS_NRT_DCH_ttiXX
transport can be defines
used the
either
window offset values can be used to cope withoffset
parameter
in the value
Iur or to
value. be
DRNC The
Indication
added
IP
Iub interface. and
jittertogenerated
thetransport the Preemption
corresponding
can
The beR99used
by DCH
the Required
either
FP in themessage.
receiving
intermediate IurIuror
window
or
ToAWS_RT_DCH_ttiXX
DRNC Iub interface.
offset values The R99
can be transport.
interface used parameter
DCH
to cope value.
FP the
with
By default The
jitterIP
receiving
the
transport
window
generated
value is zero can
offset be
by meaningused
values either
can
the intermediate be
that extrain
usedthe Iur
to
Iuroffset or
cope
or DRNC DRNC
with
is notIub
Iub
the interface.
jitterfor
interface
applied theThe
generated
transport. R99
by the
By
receiving DCH
default FP
window. thereceiving
intermediate
value
The iswindow
Iur
needed or
zero,
offset
DRNC
meaning values
Iub that can
interface
extra be used
transport.
offset
offset values are dependent on the isto cope
not By with
default
applied the
for jitter
the
the
generated
value
receiving is zero,
characteristics by the
window. intermediate
meaning
of the that extra
Thecorresponding
needed Iur or transport
DRNC
offset
offset is notIub
values are
interface
applied
network.for
dependent transport.
the
on the By default
receiving window.
characteristics theThevalue
of the is zero,
needed
The
meaning
offset parameter
values
corresponding that are defines
extra offset
dependent
transport theisorigin
not of the for
on applied
network. the lastthe
configuration
receiving
characteristics action
window. affecting
The
of the neededthe
corresponding object.
offset values are
transport
dependent
network. on the characteristics of the
corresponding transport network.

0.01...320 ms, step 0.01 ms, HSUPA CC mechanism disabled. Internal
100 ms
information. (0)
0...320 ms, step 0.01 ms 70 ms
0...320 ms, step 0.01 ms 50 ms
0...63, step 1 46 (Expedited Forwarding)
0...63, step 1 0 (Best effort)
0...63, step 1 34
0...63, step 1 34
HSPA over Iur disabled (0), HSPA over Iur enabled (1) HSPA over Iur disabled (0)
Disabled (0), Enabled (1) Enabled (1)
0...63, step 1 34
Not Supported (0), Supported (1) Not Supported (0)
3GPP, Nokia (0), Mode 1 (1), Mode 2 (2), Mode 3 (3), Mode 4 (4),
3GPP, Nokia (0)
Mode 5 (5), Mode 6 (6), Mode 7 (7)
1...4095, step 1, IP transport is not used (0) IP transport is not used (0)
540...1472 byte, step 1 byte 1428 byte
128...41984 kbps, step 128 kbps 9600 kbps
1026...49150, step 1 1026
3G-WCDMA RNC (0), Flexi Direct RNC (1) 3G-WCDMA RNC (0)
international network 0 (0), international network 1 (4), national
Not applicable
network 0 (8), national network 1 (12), not in use (255)
1...4294967295, step 1, Signaling Point Code of Neighbor RNC is not
Not applicable
used (0)
R99 (1), Rel4 (2), Rel5 (3), Rel6 (4), Rel7 (5), Rel8 (6), Rel9 (7), Rel10 Rel5 (3)
DISABLED (0), ENABLED (1) DISABLED (0)
0...1, step 0.0001 0.1
Not Supported (0), Supported (1) Not Supported (0)
0...50 ms, step 1 ms 0
0...50 ms, step 1 ms 0
0...100 ms, step 1 ms 0
0...50 ms, step 1 ms 0
Not defined (0), Network originated configuration action (1), NetAct
RNW plan originated configuration action (2), Element Manager
originated configuration action (3), Configuration action by automatic Not applicable
tuning function (4), Element Manager originated mass config action
(5), NetAct originated direct RNW change (6)
SRNS Relocation SRNS Relocation
Nokia Value
(Nokia => Nokia) (Nokia => Huawei)

1 (Supported) 1 (Supported) 1 (Supported)
100 ms 100 ms 100 ms
70 ms 70 ms 70 ms
50 ms 50 ms 50 ms
46 (Expedited Forwarding) 46 (Expedited Forwarding) 46 (Expedited Forwarding)
0 (Best effort) 0 (Best effort) 0 (Best effort)
34 18 18
34 34 34
HSPA over Iur disabled (0) HSPA over Iur disabled (0) HSPA over Iur disabled (0)
Enabled (1) Enabled (1) Enabled (1)
34 34 34
Not Supported (0) Not Supported (0) Not Supported (0)
3GPP, Nokia (0) 3GPP, Nokia (0) Mode 1 (1)
IP transport is not used (0) Planning - Refer To CIQ Planning - Refer to CIQ
Not applicable Planning - Refer To CIQ Planning - Refer to CIQ
Supported (1) Supported (1) Supported (1)
1428 byte 1428 byte 1428
9600 kbps 9600 kbps 9600 kbps
1026 1026 1026
Not applicable 234 234
Not applicable 10 10
2 (2 digits) 2 (2 digits) 2 (2 digits)
3G-WCDMA RNC (0) 3G-WCDMA RNC (0) 3G-WCDMA RNC (0)
Not applicable Planning - Refer To CIQ Huawei RNC Id
Not applicable 8 (national network 0) 8 (national network 0)
Supported (1) Supported (1) Not Supported (0)
Not applicable Planning - Refer To CIQ Planning - Refer to CIQ
Rel5 (3) Rel 9 (7) Rel 7 (5)
DISABLED (0) DISABLED (0) DISABLED (0)
0.1 0.1 0.1
Not Supported (0) Not Supported (0) Not Supported (0)
0 0 0
0 0 0
0 0 0
0 0 0

Legacy TEF Nokia - Beacon VF
IUR Anchoring
Nokia O2 UK Range for Optimisation
(Nokia => Ericsson)
(Iur available)

Not Supported (0) 1 (Supported)
100 ms 100 ms
70 ms 70 ms
50 ms 50 ms
46 (Expedited Forwarding) 46 (Expedited Forwarding)
0 (Best effort) 18 (TEF), 0 (VDF)
18 26 (TEF), 34 (VDF)
34 34
HSPA over Iur disabled (0) HSPA over Iur disabled (0)
34 34
Not Supported (0) Not Supported (0)
Mode 2 (2) 3GPP, NSN (0)
Planning - Refer to CIQ Planning - Refer to CIQ
Supported (1) Supported (1)
1428 1428
9600 kbps 9600 kbps
1026 1026
234 234
10 10
2 (2 digits) 2 (2 digits)
3G-WCDMA RNC (0) 3G-WCDMA RNC (0)
Ericsson RNC Id Planning - Refer to CIQ
8 (national network 0) 8 (national network 0)
Not Supported (0) Supported (1)
Rel 6 (4) Rel 9 (7)
DISABLED (0) DISABLED (0)
0.1 0.1
Supported (1) Not Supported (0)
0 0
0 0
0 0
0 0

IP Based Iur
IP Based Iur
IP Based Iur
Associated with I-HSPA

Should be set to Rel 5 (3) when neighbouring RNC is Ericsson

Frequency
10668 Extended Discrepancy Daily


11980 No Auto Disc Check Required


New in RU30
RU20 on TOP
RU20 on TOP
RU20 on TOP
New in RU20
RU20 on TOP
New in RU20
RU20 on TOP
RU20 on TOP
RU20 on TOP
RU20 on TOP
New in RU20
New in RU30
RU20 on TOP
New in RU20
RU20 on TOP
RU20 on TOP
New in RU20
New in RU40 8.0

4.0
New In RU50 EP1 9.0
New In RU50 EP1 9.0

New In RU50 EP1 9.0
New In RU50 EP1 9.0
4.5
4.5
4.5
New in RU40 8.0
9.0
4.5
4.5
4.5
4.5
9.0
9.0
4.5
4.5
9.0
9.0
9.0
4.5
4.5
4.5
4.5
4.5
PFL Parameters
Abbreviated Name

AMRToNonPreferredLayer
BlindHORSCPThrAbove
BlindHORSCPThrBelow
LaySelLowLoadPref
LaySelWeightBand
LaySelWeightLoad
LaySelWeightPrefLayer
LaySelWeightRSCP
PFL64QAMAMR - PrefLayer64QAMAMR
PFL64QAMAMRNRT - PrefLayer64QAMAMRNRT
PFL64QAMNRT - PrefLayer64QAMNRT
PFL64QAMStr - PrefLayer64QAMStr
PFLCSHSAMR - PrefLayerCSHSAMR
PFLCSHSAMRNRT - PrefLayerCSHSAMRNRT
PFLCSHSNRT - PrefLayerCSHSNRT
PFLCSHSStr - PrefLayerCSHSStr
PFLDBHSDAMR - PrefLayerDBHSDAMR
PFLDBHSDAMRNRT - PrefLayerDBHSDAMRNRT
PFLDBHSDNRT - PrefLayerDBHSDNRT
PFLDBHSDStr - PrefLayerDBHSDStr
PFLDCHSDAMR - PrefLayerDCHSDAMR
PFLDCHSDAMRNRT - PrefLayerDCHSDAMRNRT
PFLDCHSDNRT - PrefLayerDCHSDNRT
PFLDCHSDStr - PrefLayerDCHSDStr
PFLDCMIAMR - PrefLayerDCMIAMR
PFLDCMIAMRNRT - PrefLayerDCMIAMRNRT
PFLDCMINRT - PrefLayerDCMINRT
PFLDCMIStr - PrefLayerDCMIStr
PFLFastMovUECS - PrefLayerFastMovUECS
PFLFastMovUEPS - PrefLayerFastMovUEPS
PFLFDPCHAMR - PrefLayerFDPCHAMR
PFLFDPCHAMRNRT - PrefLayerFDPCHAMRNRT
PFLFDPCHNRT - PrefLayerFDPCHNRT
PFLFDPCHStr - PrefLayerFDPCHStr
PFLHSDPAAMR - PrefLayerHSDPAAMR
PFLHSDPAAMRNRT - PrefLayerHSDPAAMRNRT
PFLHSDPANRT - PrefLayerHSDPANRT
PFLHSDPAStr - PrefLayerHSDPAStr
PFLHSPAAMR - PrefLayerHSPAAMR
PFLHSPAAMRNRT - PrefLayerHSPAAMRNRT
PFLHSPANRT - PrefLayerHSPANRT
PFLHSPAStr - PrefLayerHSPAStr
PFLMIMOAMR - PrefLayerMIMOAMR
PFLMIMOAMRNRT - PrefLayerMIMOAMRNRT
PFLMIMONRT - PrefLayerMIMONRT
PFLMIMOStr - PrefLayerMIMOStr
PFLR99AMR - PrefLayerR99AMR
PFLR99AMRNRT - PFLR99AMRNRT
PFLR99NRT - PrefLayerR99NRT
PFLR99Str - PrefLayerR99Str
O&M Parameters
PFLChangeOrigin
PFLIdentifier
AMR to Non Preferred Layer PFL HC

Blind HO RSCP threshold above PFL HC
Blind HO RSCP threshold below PFL HC
Layer Selection Low Load Preferred PFL HC
Layer Selection Weight of Band PFL HC
Layer Selection Weight of Load PFL HC
Layer Selection Weight of Preferred Layer PFL HC
Layer Selection Weight of RSCP PFL HC
Preferred Layer for 64QAM AMR PFL HC
Preferred Layer for 64QAM AMR and NRT PFL HC
Preferred Layer for 64QAM NRT PFL HC
Preferred Layer for 64QAM Streaming PFL HC
Preferred Layer for CS voice HSPA AMR PFL HC
Preferred Layer for CS voice HSPA AMR and NRT PFL HC
Preferred Layer for CS voice HSPA NRT PFL HC
Preferred Layer for CS voice HSPA Streaming PFL HC
Preferred Layer for DB-DC-HSDPA AMR PFL HC
Preferred Layer for DB-DC-HSDPA AMR and NRT PFL HC
Preferred Layer for DB-DC-HSDPA NRT PFL HC
Preferred Layer for DB-DC-HSDPA Streaming PFL HC
Preferred Layer for DC-HSDPA AMR PFL HC
Preferred Layer for DC-HSDPA AMR and NRT PFL HC
Preferred Layer for DC-HSDPA NRT PFL HC
Preferred Layer for DC-HSDPA Streaming PFL HC
Preferred Layer for DC and MIMO AMR PFL HC
Preferred Layer for DC and MIMO AMR and NRT PFL HC
Preferred Layer for DC and MIMO NRT PFL HC
Preferred Layer for DC and MIMO Streaming PFL HC
Preferred Layer for fast moving UE CS PFL HC
Preferred Layer for fast moving UE PS PFL HC
Preferred Layer for F-DPCH AMR PFL HC
Preferred Layer for F-DPCH AMR and NRT PFL HC
Preferred Layer for F-DPCH NRT PFL HC
Preferred Layer for F-DPCH Streaming PFL HC
Preferred Layer for HSDPA AMR PFL HC
Preferred Layer for HSDPA AMR and NRT PFL HC
Preferred Layer for HSDPA NRT PFL HC
Preferred Layer for HSDPA Streaming PFL HC
Preferred Layer for HSPA AMR PFL HC
Preferred Layer for HSPA AMR and NRT PFL HC
Preferred Layer for HSPA NRT PFL HC
Preferred Layer for HSPA Streaming PFL HC
Preferred Layer for MIMO AMR PFL HC
Preferred Layer for MIMO AMR and NRT PFL HC
Preferred Layer for MIMO NRT PFL HC
Preferred Layer for MIMO Streaming PFL HC
Preferred Layer for R99 AMR PFL HC
Preferred Layer for R99 AMR and NRT PFL HC
Preferred Layer for R99 NRT PFL HC
Preferred Layer for R99 Streaming PFL HC
Change Origin PFL O&M

PFL Identifier PFL O&M
This parameter defines if it is allowed to transfer AMR call to disabled (0), enabled (1)
frequency
This parameter layer determines
which is notthe defined
minimumas preferred
requiredlayer CPICH -115...-25 dBm, step 1 dBm, Blind HO
when
RSCP all the
level preferred
which the frequency
RACH layers
measurement are in HSPA
result of load
the is not donedBm,
because
This
state parameter
or (SLHO) determines
load state. the maximum allowed CPICH -115...-25 step of high RSCP
1 dBm, (0)
Blind HO
source
RSCP cell must
level which achieve
the RACH before the blind inter-frequency
measurement result of the is not disabled
done because of low (1)
RSCP (-
This parameter
handover can bedefines
done whether
because extra
of athe weight
high RSCP is given
value.toThe (0), enabled
source
HSPA cell must
load in layer not exceed
selection before
forbecause
cells blind
where inter-frequency
HSPA loadcan is 126)
blind
parameter
handover can bedefines
done handover
how much
because of weight
awith of
low1000 high
the
RSCP RSCP
band
value. The 1...10000, step 1, Band capability is
low.
be HSPA
done
capability to load
a weight
cell
has in layerin a is
highermultiplied
selection.frequency band when
only. the load not used in layer selection. (0) in
blind
in theinter-frequency
Parametercell isdefines
low (HSPA howhandover
muchlevel
load because
weight 2 of
is 1,HSPAor low
load
3). RSCP
In has incan
practice, layer 1...10000, step 1, Load is not used
be
thisdone
selection.
leads toinamost
cell incase
a lowersituation
frequency band only. layer selection (0) layer
This parameter defines to how much weight where cells
the with low
preferred 1...10000, step 1, Preferred
HSPA
layer load are preferred
definitions have in moreselection.
layer than capability
The & servicelayer
preferred definitions are not used.
This parameter
combination defines
(related how muchlayer
to preferred weight RSCP below
definitions), bandor 1...10000, step 1, RSCP is not(0)
used in
definitions
above the are done with
threshold has PFL-PrefLayer... parameters.
capability
This and low/high
parameter defines RSCP.the preferred layers for HSDPA for
in layer selection. The threshold layer selection.
0...16383, step(0)
1
RSCP
64QAM below the
capabledefines threshold
UE thatthe has is only
defined with the
an AMR RAB HOPI-
allocated.
This parameter
BlindHORSCPThrBelow preferred
parameter, layers
and RSCP for HSDPA
above 0...16383, step 1
(CS
64QAM RABs other
capable than
UE with AMR
thatthehas use the same
an AMRlayers parameter
RAB, 0...1 asthe
streaming
threshold
This
AMR.) is
parameter defined
defines the HOPI-BlindHORSCPThrAbove
preferred for HSDPA 64 0...16383, step 1
RAB,
QAM and 1...3UE
parameter.
capable NRT thatRAB(s)
has allocated.
only NRT (CS RABs
RAB(s) other than
allocated.
This
AMRparameter
use the same defines the preferred
parameter as AMR.) layers for HSDPA 64 0...16383, step 1
The
QAM frequencies
capable UE are
that given
has in streaming
a UTRA Absolute RAB for Radio
and 0...3 NRT
This
The parameter
frequencies
Frequency defines
Channel are theinpreferred
given
Number UTRA
(UARFCN) layers
Absolute
format, CS
Radio voice
which 0...16383, step 1
RAB(s)
The
over HSPAallocated.
frequencies capable are UEgiven in UTRA
thatpreferred
has Absolute
only an AMR Radio
Frequency
defines
This the Channel
parameter
Frequency downlink
defines
Channel
Number
channel
the
Number
(UARFCN)
number
(UARFCN) and
layers theforRAB
format,
format, CSwhich
downlink
voice
which 0...16383, step 1
allocated.
defines
carrier
over the (CS
frequency
HSPA RABs
downlink
capable of other
channel
the
UE than
preferred
that has AMR
number
ancell.
AMRuse
and
Up the
the
to
RAB, same
downlink
eight different
0...1
The
This frequencies
defines theas
parameter downlinkare
defines given
channel
the in UTRA
number
preferred Absolute
and the Radio
downlink
parameter
carrier
preferred
streaming
Frequency frequency
layers
RAB, AMR.)
Channelcan
andof the
be preferred
defined.
1...3
Number NRT cell.layers
RAB(s)
(UARFCN) Up to for
eight
allocated.
format,
CSdifferent
(CS
voice
which RABs
0...16383, step 1
carrier
over
preferred frequency
HSPA capable
layers of the
UE
can thebe preferred
that
defined.has cell.
only Up
NRT to eight
RAB(s) different
allocated.
This
otherparameter
defines than
the AMR defines
use
downlink the
same
channel preferred
parameter
number layers
and asthefor
AMR.)CS voice
downlink 0...16383, step 1
preferred
The layers
frequencies can
areUE be defined.
given inhasUTRA Absolute RAB Radioand 0...3
over
carrier
This HSPA
parameter capable
frequency of the
defines that
preferred
the acell.
preferred streaming
Upformat,
layersto for
eightDualdifferent
Band 0...16383, step 1
The frequencies
Frequency
NRT RAB(s) Channel are
allocated. given
Number in UTRA
(UARFCN) Absolute Radio which
The
HSDPA frequencies
preferred
Frequency layers
capable
Channel are Number
can
UE given
be
that hasin (UARFCN)
defined. UTRA
only anAbsolute
AMR RAB
format, Radioallocated.
which
defines
This
Frequency the Channel
parameter downlink
defines channel numberlayers
the preferred
Number (UARFCN) and thefordownlink
format, Dual
which Band 0...16383, step 1
(CS
HSDPA RABs
defines
carrier the other
downlink
frequency
capable than
UEof theAMR
channel
that use
preferred
has an the
number same
cell.
AMR and
Up
RAB,parameter
the
to downlink
eight
0...1 as
different
streaming
The
This frequencies
defines the downlink
parameter are
defines given
channel in UTRA
number
the preferred Absolute
and the Radio
downlink
AMR.)
carrier
preferred
RAB, frequency
and
Frequency layers
1...3 can
NRT
Channel of the
be preferred
defined.
RAB(s)
Number cell.layers
allocated.
(UARFCN) Up
(CS to for
eight
RABs
format,
Dual
other
which
Band
differentthan
0...16383, step 1
carrier
HSDPA
preferred frequency
capable
layers UEof the
that
canparameter
be preferred
has
defined. only cell.
NRT Up to
RAB(s) eight different
allocated.
This
AMR
definesparameter
usethe the defines
same
downlink the
channel preferred
as AMR.)
number layers
and thefordownlink
Dual Band 0...16383, step 1
preferred
The layers
frequencies can be
are that defined.
given in a UTRA Absolute Radio
HSDPA
carrier
This capabledefines
frequency
parameter UEof the has
preferred
the streaming
preferredcell. RAB
Upformat,
layersto for
eightand
Dual 0...3
different
Cell 0...16383, step 1
The frequencies
Frequency
allocated. given
Number in UTRA
The frequencies
preferred
HSDPA
Frequency layers
capable
Channel are
can
UE given
be
that
Number hasin
defined. UTRA
only an
(UARFCN) Absolute
AMR RAB
format, Radioallocated.
which
defines
This
parameter downlink
the preferred
Number (UARFCN) and thefordownlink
format, Dual
which Cell 0...16383, step 1
(CS
HSDPA RABs
defines
carrier the other
downlink
frequency
capable than
UEof theAMR
channel
that use
preferred
has an the
number same
cell.
AMR and
Up
RAB,parameter
the
to downlink
eight
0...1 as
different
streaming
The
This frequencies
parameter are
defines given
channel in UTRA
number
the preferred Absolute
and the Radio
downlink
AMR.)
carrier
preferred
RAB, frequency
and
Frequency layers
1...3 can
NRT
Channel of the
be preferred
defined.
RAB(s)
Number cell.layers
allocated.
(UARFCN) Up
(CS to for
eight
RABs
format,
Dual
other
which
Cell
differentthan
0...16383, step 1
carrier
HSDPA
preferred frequency
capable
layers UEof the
that
canparameter
be preferred
has
defined. only cell.
NRT Up to
RAB(s) eight different
allocated.
This
AMR
definesparameter
usethe the defines
same
downlink the
channel preferred
as AMR.)
number layers
and thefordownlink
Dual Cell 0...16383, step 1
preferred
The layers
frequencies can be
are that defined.
given in a UTRA Absolute Radio
HSDPA
carrier
This capabledefines
frequency
parameter UEof the has
preferred
the streaming
preferredcell. RAB
Upformat,
layersto for
eightand
UE 0...3
different
that 0...16383, step 1
The frequencies
Frequency
allocated. given
Number in UTRA
The frequencies
preferred
supports
Frequency layers
both Dual
Channel are
can given
be
Cell
Number in
defined.
HSDPA UTRA Absolute
and MIMO
(UARFCN) and
format, Radiothat
which has
defines
This
Frequency the
parameter downlink
defines
Channel channel
the
Number number
preferred
(UARFCN) and
layers thefordownlink
format, UE that
which 0...16383, step 1
only an
defines
carrier
supports AMR
the
frequency
both RAB
downlink
Dual allocated.
of channel
the preferred(CS
numberRABs
cell. other
and
Up the
to than AMR
downlink
eight has use
different
The
This
the frequencies
defines the
parameter
same downlink
parameter areCell
defines given
as
HSDPA
channel
the
AMR.)
andAbsolute
inpreferred
UTRA
number MIMO
and
layers and
the Radio
for thatthat
downlink
UE an 0...16383, step 1
carrier
preferred
AMR frequency
RAB,
Frequency layers
0...1
Channelcanof the
be
streaming preferred
defined.
Number RAB, cell.
and
(UARFCN) Up
1...3 to
NRT
format,eight different
RAB(s)
which
carrier
supports frequency
both Dual of the
canCell preferred
HSDPA cell. Up
and MIMO and to eight different
which
preferred
This
allocated.
defines thelayers
parameter(CS defines
RABs
downlink be defined.
the
other
channel preferred
than AMR layers
number use
and the
theforsame
UE thathas
preferred
only
The NRT layers
RAB(s)
frequencies can be defined.
allocated.
are given in UTRA Absolute Radio
supports
parameter
carrier
This both
parameter Dual
as AMR.)
frequency of Cell
definesthe HSDPA
preferred
the and
preferredcell.MIMO toand
Upformat,
layers eight
for that
fast has a
different
moving 0...16383, step 1
Frequency
streaming Channel
RAB and Number
0...3 NRT (UARFCN)
RAB(s) allocated. which
preferred
UE
The with layers
AMR
frequencies RABcan be
areorgiven defined.
other CS RAB,Absolute
0...1
and streaming RAB
defines
This
The the
parameter
frequencies downlink
defines
are Number thein
channel
given
UTRA
number
inpreferred
UTRA layers
Absolute the Radio
for downlink
fast moving
Radio 0...16383, step 1
and
UE 0...3
Frequency
carrier
with NRT
frequency
0...3 RAB(s)
Channel of
PSdefines
NRT the allocated.
preferred
RAB(s) (UARFCN)
cell.
and 0...1 Up format,
PS to eight
streaming which
different
The
This frequencies
Frequency
definesparameter
the Channel
downlink
are given
theinpreferred
Number
channel
UTRA
(UARFCN)
number
Absolute
format,
layers
and the
Radio
for whichRAB
F-DPCH
preferred
allocated.
Frequency
defines thelayers
(No AMR
ChannelcanRAB
Number
channelor other CS
(UARFCN)
number RABs
and exists)
format,
the which
downlink
capable
The
carrier
This UE thatdefines
frequencies
frequency
parameter has
are only
given
of the an
preferred
the AMR
inpreferred
UTRA RAB
cell. Upallocated.
Absolute
layersto Radio
eight
for (CS
different
F-DPCH 0...16383, step 1
defines
carrier
RABs
Frequency the
other downlink
frequencythan
Channel of
AMR channel
the preferred
use
Number the number
samecell.
(UARFCN) and
Up the
to
parameter
format downlink
eight as different
whichAMR.)
preferred
capable
The
carrier layers
frequencies
frequency can
UE thatdefines
has
are
of be defined.
an the
given
the AMR RAB,
inpreferred
preferred UTRA 0...1 streaming
Absolute
cell. Up to Radio
eight RAB,
different
This
definesparameter
preferred thelayers can
channel number layers
and thefor F-DPCH
and 1...3
Frequency
preferred
capable NRT
layers RAB(s)
Channelcan
UE thatdefines
has be allocated.
Number
onlydefined.
NRT (CS
(UARFCN)
RAB(s) RABs other
format
allocated. than
which AMR
The
This
use frequencies
carrier frequency
parameter
the same are
of
parameter given
the theasinpreferred
preferred UTRA
AMR.) Absolute
cell. Up
layersto Radio
two
for different
F-DPCH 0...16383, step 1
defines
downlinkNumber channel(UARFCN)
number and the downlink
format, which
preferred
capable
carrier layers
UE
frequency can
thatdefines
has
of be
the defined. Frequencies
a streaming
preferred RAB
cell. and
Up to0...3
twoareNRT
in
different
This
The
definesparameter
frequencies
the downlinkare the
given
channel inpreferred
UTRA
number layers
Absolute
and thefor HSDPA
Radio
preference
RAB(s)
The frequencies
preferred order.
allocated.
layers are Number
can given
be in AMR
defined. UTRA Absolute
Frequencies Radio
arewhich
in
capable
Frequency
carrier
This UE
frequency
parameter thatdefines
Channel has only
of the an
preferred
the (UARFCN)
preferred RAB
cell. Upallocated.
format,
layersto for
eight (CS
different
HSDPA 0...16383, step 1
Frequency
preference
RABs
defines other
the Channel
order.
than
downlink AMR Number
use
channel the (UARFCN)
same
number format,
parameter
and the which
as AMR.)
downlink
preferred
capable
The layers
UEdownlink
frequencies
defines the can
thatdefines
has be
an
are given defined.
AMR
channel RAB,
inpreferred
UTRA
number 0...1 streaming
Absolute
and the Radio RAB,
downlink
This
carrierparameter
frequency of the the
preferred layers
cell.RABs
Upformat,for
toother HSDPA
eightwhich
different 0...16383, step 1
and 1...3
Frequency
carrier
capable NRT
UE RAB(s)
Channel
frequencythat can of
has the allocated.
Number
onlypreferred
NRT (CS
(UARFCN)
cell.
RAB(s) Up to eight
allocated. than AMR
different
The frequencies
preferred
use the layers
same are be
parameter given inAMR.)
defined.
as UTRA Absolute Radio
defines
preferred
Frequency the downlink
layers
Channel channel
can Number
be defined. number and
(UARFCN) the downlink
format, which
carrier
The
defines frequency
frequencies
the downlink of
are the preferred
given
channel in UTRA
numbercell. Up
Absolute
and to
the eight
Radio different
downlink
The frequencies
preferred
Frequency layers
Channel are
can given
be in
defined.
Number UTRA
(UARFCN) Absolute Radio
carrier
Frequency frequency
Channel of the preferred
Number cell. Upformat,
(UARFCN) to eightwhich
format, different
which
defines
preferred the downlink
layers can channel
be defined. number and the downlink
carrier frequency channel
of the preferred numbercell. and
Up to the downlink
eight different
carrier frequency of the
preferred layers can be defined. preferred cell. Up to eight different
preferred layers can be defined.
This parameter defines the preferred layers for HSDPA 0...16383, step 1
capable UE that has a streaming RAB
This parameter defines the preferred layers for HSPA and 0...3 NRT 0...16383, step 1
RAB(s)
(HSDPA allocated.
+ HSUPA) capable UE that has only an AMR RAB
This parameter defines the preferred layers for HSPA 0...16383, step 1
allocated.
(HSDPA + (CS RABscapable
HSUPA) other thanUE AMR
that usean
has the same
AMR RAB, 0...1
The
This frequencies
parameter
parameter are given in UTRA Absolute
defines the preferred layers for HSPA
as AMR.) Radio 0...16383, step 1
streaming
Frequency
(HSDPA + RAB,
Channel
HSUPA) andcapable
1...3 NRT
Number RAB(s)
(UARFCN)
UE that has allocated.
format,
only NRT (CS
which RABs
RAB(s)
This
other parameter
definesthantheAMR defines
use the
downlink the
same
channel preferred
parameter
number layers
andas for
the HSPA
AMR.)
allocated.
The frequencies
(HSDPA + HSUPA) arecapable
given inUEUTRAthatAbsolute
has a Radio
streaming RAB
carrier
This frequency
parameter
Frequency Channel of the
defines preferred
the
Number cell.layers
preferred
(UARFCN) Upformat,
to for
eight different
HSDPA
which 0...16383, step 1
and
The
MIMO 0...3
preferred NRT
frequencies
layers
capable RAB(s)
UEare
can be
that allocated.
given in UTRA
defined.
has only an Absolute
AMR RAB Radio
allocated.
The
This frequencies
defines the Channel
parameter are
downlink
definesgiven
channelin UTRA Absolute
numberlayers
the preferred and the Radio
fordownlink
HSDPA 0...16383, step 1
Frequency
(CS RABs
Frequency other
Channel than Number
AMR
Number (UARFCN)
use thecell.
(UARFCN) same format,
parameter
format, which
whichas
carrier
MIMO
The frequency
capable
frequencies
defines the UE of
are
downlink the
that
givenpreferred
has
channelinan AMR
UTRA
number Up
RAB,
Absolute
and to eight
0...1
the different
streaming
Radio
This
AMR.) parameter
defines the defines
downlink the preferred
channel numberlayersand fordownlink
the HSDPA
preferred
RAB, and
Frequency
carrier layers
1...3
Channel
frequency can
NRT of be defined.
RAB(s)
Number
the allocated.
(UARFCN)
preferred cell. (CS
Up RABs
format,
to eight other
which than
different
MIMO
carrier
This capable
frequency
parameter UE that
defines has
of parameter
the only
preferred
the NRT RAB(s)
cell.layers
preferred Up to allocated.
eight
for different
HSDPA 0...16383, step 1
AMR
definesuse
preferred thethe
layers same
downlink
can channel
be as AMR.)
number
defined. and the downlink
The
MIMO frequencies
preferred layers
capable UEarethat
can given
be ina UTRA
defined.
has Absolute
streaming RAB Radio
and 0...3 NRT
carrier
This
The frequency
parameter
frequencies
Frequency Channel of the
defines
are givenpreferred
the
Number UTRA cell.
inpreferred Upformat,
layers
Absolute to for
eight
R99
Radio different
capable 0...16383, step 1
RAB(s)
The
preferred
UE that
Frequency
allocated.
frequencies
layers
has only
Channel are
can
an given
be
AMR
Number in (UARFCN)
RAB UTRA
defined. Absolute
allocated.
(UARFCN) (CS
format,
which
Radio
RABs
whichother
defines
This the Channel
parameter
Frequency downlink
the preferred
Number (UARFCN) and the
fordownlink
format, R99
whichcapable
than
UE AMR
defines
carrier
that the
has use
frequency an the
downlink
AMR same
of the
RAB, parameter
channel number
preferred
0...1 asand
cell. AMR.)
Up
streaming the
to downlink
eight
RAB, different
and 1...3
The
This frequencies
parameter are
definesgiven
channel
thein UTRA
number
preferred Absolute
and
layers the Radio
fordownlink
R99 capable 0...16383, step 1
carrier
preferred
NRT frequency
RAB(s)
Frequency layers of the
can
allocated.
Channel be preferred
defined.
(CS
Number RABs cell.
(UARFCN)otherUp to
than eight
format,AMR different
use
which the
carrier
UE
The that frequency
has
frequencies
preferred layersonly of
NRT
are
can the
be preferred
RAB(s)
given in cell.
allocated.
UTRA
defined. Up
Absolute to eight
Radio different
This
same parameter
defines parameter
the defines
downlinkas AMR.) the
channel preferred
numberlayersand fordownlink
the R99 capable 0...16383, step 1
preferred
Frequency layers
Channel can be defined.
Number (UARFCN) format, which
UE that
carrier has
frequency a streaming
of the RAB and
preferred 0...3
cell. NRT
Up to RAB(s)
eight different
The frequencies
defines
allocated. the downlink are given
channelin UTRA
number Absolute
and the Radio
downlink
preferred
Frequency
carrier layers
Channel
frequency can be defined.
Number
of the the (UARFCN)
preferred cell. format which
The parameter defines origin of theUp lasttoconfiguration
eight different Not defined (0), Network originated
defines
preferred
action
The the
affecting
frequencies downlink
layers can
the
are channel
be
object.
given in number
defined.
UTRA and theRadio
Absolute downlink configuration actionstep
(1), 1NetAct RNW
This parameter
carrier frequency is of
thethepreferred
preferred frequency layer
cell. Upformat,
to (PFL)
eight object
different 1...50,
Frequency
identifier. Channel
Itlayers
is a unique Number (UARFCN)
identifier which
for the PFL object within plan originated configuration action
preferred
defines the can be
downlink defined.
channel number and the downlink (2), Element Manager originated
the controller. The PFL contains definitions for selecting the
carrier frequency
correct frequency of the for
layer preferred
the UEcell.basedUpon to eight different
UE capability configuration action (3), Configuration
preferred layers can be defined.
and the service that the UE is using. action by automatic tuning function
(4), Element Manager originated
mass config action (5), NetAct
Default Value Nokia Value O2 UK V
PFL-ID 1
disabled (0) disabled (0) #N/A

0 dBm 0 dBm #N/A
-126 dBm -126 dBm #N/A
disabled (0) disabled (0) #N/A
0 0 #N/A
0 0 #N/A
1000 1000 #N/A
0 0 #N/A
0 0 #N/A
0 0 #N/A
0 0 #N/A
0 0 #N/A
0 0 #N/A
0 0 #N/A
0 0 #N/A
0 0 #N/A
0 0 #N/A
0 0 #N/A
0 0 #N/A
0 0 #N/A
0 0 #N/A
0 0 #N/A
0 0 #N/A
0 0 #N/A
0 0 #N/A
0 0 #N/A
0 0 #N/A
0 0 #N/A
0 0 #N/A
0 0 #N/A
0 0 #N/A
0 0 #N/A
0 0 #N/A
0 0 #N/A
0 0 #N/A
0 0 #N/A
0 0 #N/A
0 0 #N/A
0 0 #N/A
0 0 #N/A
0 0 #N/A
0 0 #N/A
0 0 #N/A
0 0 #N/A
0 0 #N/A
0 0 #N/A
0 0 #N/A
0 0 #N/A
0 0 #N/A
0 0 #N/A
Not applicable Not applicable #N/A

Not applicable Not applicable #N/A
O2 UK Value O2 UK Range for Optimisation
PFL-ID 2 PFL-ID 3
#N/A #N/A
#N/A #N/A
#N/A #N/A
#N/A #N/A
#N/A #N/A
#N/A #N/A
#N/A #N/A
#N/A #N/A
#N/A #N/A
#N/A #N/A
#N/A #N/A
#N/A #N/A
#N/A #N/A
#N/A #N/A
#N/A #N/A
#N/A #N/A
#N/A #N/A
#N/A #N/A
#N/A #N/A
#N/A #N/A
#N/A #N/A
#N/A #N/A
#N/A #N/A
#N/A #N/A
#N/A #N/A
#N/A #N/A
#N/A #N/A
#N/A #N/A
#N/A #N/A
#N/A #N/A
#N/A #N/A
#N/A #N/A
#N/A #N/A
#N/A #N/A
#N/A #N/A
#N/A #N/A
#N/A #N/A
#N/A #N/A
#N/A #N/A
#N/A #N/A
#N/A #N/A
#N/A #N/A
#N/A #N/A
#N/A #N/A
#N/A #N/A
#N/A #N/A
#N/A #N/A
#N/A #N/A
#N/A #N/A
#N/A #N/A
#N/A #N/A
#N/A #N/A
Frequency
New in RU30
RU20 on TOP
RU20 on TOP
New in RU30
RU20 on TOP
New in RU30
RU20 on TOP
RU20 on TOP
RU20 on TOP
RU20 on TOP
RU20 on TOP
RU20 on TOP
RU20 on TOP
RU20 on TOP
RU20 on TOP
RU20 on TOP
New in RU40
New in RU40
New in RU40
New in RU40
RU20 on TOP
RU20 on TOP
RU20 on TOP
RU20 on TOP
New in RU30
New in RU30
New in RU30
New in RU30
New in RU30
New in RU30
RU20 on TOP
RU20 on TOP
RU20 on TOP
RU20 on TOP
RU20 on TOP
RU20 on TOP
RU20 on TOP
RU20 on TOP
RU20 on TOP
RU20 on TOP
RU20 on TOP
RU20 on TOP
RU20 on TOP
RU20 on TOP
RU20 on TOP
RU20 on TOP
RU20 on TOP
RU20 on TOP
RU20 on TOP
RU20 on TOP
RU20 on TOP
RU20 on TOP
New in RU50 EP1
8.9
8.9
8.9
8.9
8.9
8.9
8.9
8.9
8.9
8.9
8.9
8.9
8.9
8.9
8.9
8.9
8.9
8.9
8.9
8.9
8.9
8.9
8.9
8.9
8.9
8.9
8.9
8.9
8.9
8.9
8.9
8.9
8.9
8.9
8.9
8.9
8.9
8.9
8.9
8.9
8.9
8.9
8.9
8.9
8.9
8.9
8.9
8.9
8.9
8.9
8.9
8.9
PREBTS Parameters
AutoConnHWID Auto Connection Hardware ID
AutoConnSiteID Auto Connection site ID
BTSID BTS Identifier
PREBTSID PREBTS Identifier
TechnologyInformation Technology Information
Version Version
PREBTS Identification
This parameter is the identification string that the BTS uses during the 0...11 characters
autoconnection
This parameter is procedure to identify
the identification itselfthat
string when thethe
BTSlogical
usesBTS ID the
during is not yet 0...50 characters
known to the
autoconnection BTS.
procedure
This parameter defines theto identify
unique itself when
identifier the logical
by which the BTSBTS ID is notitself
identifies yet to 1...65534, step 1, If value is
known
the to the BTS.
ThisNetwork.
parameter identifies the PREBTS (object for BTS Auto Connection 0 it should step
1...65534, be treated as is
1, If value
Note: All parameters
functionality related are equivalent
parameters) relatedwithing
to each other. If more than one not_defined. (0)
This parameter
identification specifies
parameter has BTSuniquely
thebeen type untilall
defined, it has the
beenRNC.
parameters commissioned. The
should be matched.
0 it should(3),
FlexiBTS be FlexiLiteBTS
treated as
Technology not_defined. (0)
This parameter specifies the version information that the BTS should use asthe
Information is reported to the RNC Mediator from the BTS with (17)
3...10 characters
BTS O&M interface.
swVersion, for example, WNx.y, until it has been commissioned.

FlexiBTS (3) FlexiBTS (3) FlexiBTS (3)
WN7.0 WN7.0 Not applicable
O2 UK Range for Optimisation Comments Parameter Type
BTS Auto-connection Feature

IPD PTY ID Discrepancy - Criticality Discrepancy Checking Frequency
New in RU30
New in RU30
New in RU30
New in RU30
New in RU30
New in RU30
RNAC Parameters
Abbreviated Name

AMRLoadTxPower
AMRNumofReconf
AMRwinSizeSCload
AutoACDecRestHysNRTQ
AutoACDecRestHysRTWP
AutoACIncRestHysNRTQ
AutoACIncRestHysRTWP
AutoACMaxRestLevel
AutoACRLevelUpdInt
BitRateSetPSNRT
DLmaxBitRatePerSF - DLmaxBitRateSF128
DLpuncturingLimit
DynHSUPABLERAlgTrgTime
DynHSUPABLERBurstDataRx
DynHSUPABLERContDataRx10
DynHSUPABLERContDataRx2
DynHSUPABLERFrameWinSiz
DynHSUPABLERMaxRateThrB
DynHSUPABLERMaxRateThrC10
DynHSUPABLERMaxRateThrC2
DynHSUPABLERPeakRateRx
DynHSUPABLERThrBurstyTP
DynHSUPABurstyPeriod
EmeCallLevelValue
EmeCallPCIValue
EmeCallPVIValue
ExpectReorderingPDCP
FmaxPeriodPDCP
FmaxTimePDCP
FreePtxSafetyMarginStr
HeaderCompressionMethod
HSFACHDiscardTimer
HSFACHResetTimer
ICRHostOperatorId
L1BurstDataBLERTrgtEDCH
L1ContBLERTrgtEDCH10
L1ContBLERTrgtEDCH2
L1PeakRateBLERTrgtEDCH
LoadBasedAMRCodecMode
MaxFreezingTime
MaxHeaderPDCP
MaxNumberOfReAttemptsCong
NonTCPspacePDCP
PCPreamble
PCrangeDL
PeriodULRCAMR
RNARDSACCell_DCH
RNARDSACCell_PCH
RNARDSACGuardTime
RRCConnSetupMsgSize
TCPspacePDCP
TDMultForHSDPAStreaming
TFDCHZeroBitRate
ULmaxBitRatePerSF - ULmaxBitRateSF128
ULpuncturingLimit
UlScrCodeMin
Power Control Parameters
AdjustmentPeriod
AdjustmentRatio
DCHSlopeOfTheCurve
DLInLoopPCStepSizeCPC
DownlinkInnerLoopPCStepSize
EDCHSlopeOfTheCurve
FOLPCSIRTgtModInt
FOLPCStepSizSIRTgt
GainFactorControlPartPRACHmessage - PrachBetaC120
GainFactorDataPartPRACHmessage - PrachBetaD120
MaxAdjustmentStep
MinPrefChange
PrefSubtract
StepSizeForDCHBLER
StepSizeForEDCHBLER
ULFastOLPCDTXthld
UpLinkInitialTransmitPowerMode
UpLinkRecoveryPeriodPowerMode
Load Control Parameters
AutoACRestForCellPCH
AutoACResFromCellPCH
AutoACRTrigRNCLoad
DLLoadSource
Radio Resource Utilisation Parameters
SRBDelay
Telecom Parameters
PagingRestrictionInd
RAU_LAU_RestrictionInd
RNACChangeOrigin
RNACId
SignallingLinkInactivityTimer
Full Name
Managed Object
Indicator for downlink radio power load RNAC

AMRNumofReconf RNAC
AMRwinSizeSCload RNAC
Automatic Access Class Decrease Restriction Level Hysteresis for NRT queu RNAC
Automatic Access Class Decrease Restriction Level Hysteresis for Receive RNAC
Automatic Access Class Increase Restriction Level Hysteresis for NRT queue RNAC
Automatic Access Class Increase Restriction Level Hysteresis for Received RNAC
Automatic Access Class Maximum Restriction Level RNAC
Automatic Access Class Restriction Level Update Interval RNAC
Bit rate set for PS NRT DCHs RNAC
Maximum DL bit rate with spreading factor 128 RNAC
DL puncturing limit RNAC
Time to trigger Dyn HSUPA BLER Algorithm RNAC
Retransmissions in Dyn HSUPA BLER for Bursty Data RNAC
Retransmissions in Dyn HSUPA BLER for Cont Data 10msTTI RNAC
Retransmissions in Dyn HSUPA BLER for Cont Data 2 ms TTI RNAC
Window size for FP Frames Measurement RNAC
Peak rate threshold for bursty data of Dyn HSUPA BLER RNAC
Peak rate thr for cont data of Dyn HSUPA BLER 10 ms TTI RNAC
Peak rate thr for cont data of Dyn HSUPA BLER 2 ms TTI RNAC
Retransmissions in Dyn HSUPA BLER for Peak data RNAC
Bursty Data throughput threshold for HSUPA RNAC
Bursty Period for Dyn HSUPA BLER RNAC
Priority level for emergency call RNAC
Pre-emption capability for emergency call RNAC
Pre-emption vulnerability for emergency call RNAC
Expect Reordering for PDCP RNAC
F Max Period for PDCP RNAC
F Max Timer for PDCP RNAC
Safety margin for free transmitted power for streaming RNAC
Header compression algorithm of PDCP RNAC
Discard Timer for BCCH, CCCH and DCCH data on HS-FACH RNAC
MAC-ehs Reset Timer for xCCH data on HS-FACH RNAC
ICR Host Operator Identifier RNAC
Layer1 Bursty Data BLER target for E-DCH RNAC
Layer1 Continuous BLER target for E-DCH TTI 10 ms RNAC
Layer1 Continuous BLER target for E-DCH TTI 2 ms RNAC
Layer1 Peak Data Rate BLER target for E-DCH RNAC
Usage of Load based AMR codec mode selection RNAC
Maximum freezing time RNAC
Max Header for PDCP RNAC
Maximum number of re-attempts to hunt resources RNAC
Non-TCP Space for PDCP RNAC
Uplink DPCCH power control preamble RNAC
Downlink power control range of radio link RNAC
Period for CS AMR RRC TFC control requests RNAC
Access class restriction level for Cell_DCH RNAC
Access class restriction level for Cell_PCH RNAC
Access class restriction guard time RNAC
RRC Connection Setup Message Size Optimisation RNAC
TCP Space for PDCP RNAC
Transfer Delay multiplier for HSDPA streaming RNAC
Zero size transport block to L1 CRC calculation RNAC
Maximum UL bit rate with spreading factor 128 RNAC
UL puncturing limit RNAC
Uplink scrambling code minimum value RNAC
Adjustment period time RNAC

Adjustment ratio RNAC
DCH slope of the curve RNAC
DL inner loop PC step size for CPC users RNAC
Power adjusting step size in WCDMA BTS for DL closed loop PC RNAC
EDCH slope of the curve RNAC
Faster OLPC SIR target modification interval RNAC
Faster OLPC step size of SIR target changes RNAC
Gain factor for control part of PRACH message with 120 Ksps RNAC
Gain factor for data part of PRACH message with 12 Ksps RNAC
Maximum adjustment step RNAC
Trigger for sending the updated reference power to BTSs RNAC
Reference power subtraction parameter RNAC
Step Size for DCH BLER calculation RNAC
Step Size for EDCH BLER calculation RNAC
DTX threshold for uplink faster outer loop RNAC
Initial transmit power in uplink compressed mode RNAC
Recovery Period Power in UL Compressed Mode RNAC
Access Restriction for Cell_PCH state UE RNAC

Access Class Restriction for UEs transferring from Cell_PCH state to RNAC
Cell_FACH/Cell_DCH
Automatic Access Class Restriction Trigger of RNC Load RNAC
DL Load Source RNAC
SRB delay RNAC
Paging Restriction Indication for PPAC RNAC

RAU and LAU Restriction Indication for PPAC RNAC
Change origin RNAC
RNAC Identifier RNAC
Signalling link inactivity timer RNAC
Group
AC
AC
AC
AC, LC
AC, LC
AC, LC
AC, LC
AC, LC
AC, LC
AC
AC
AC
AC
AC
AC
AC
AC, PC
AC, PC
AC, PC
AC, PC
AC, PC
AC, PC
AC, PC
AC, PC
AC, PC
AC, PC
AC, PC
AC
AC
AC
AC
AC
AC
AC
AC
AC
AC
AC
AC, PC
AC, PC
AC, PC
AC, PC
AC
AC
AC
AC
AC
AC
AC
AC
AC, LC
AC, LC
AC, LC
AC
AC
AC
AC
AC
AC
AC
AC
AC
AC
AC
AC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
PC
LC
LC
LC
LC
Radio Resource Utilisation
Telecom
Telecom
Telecom
Telecom
Telecom
Description
This parameter indicates the load amount on the radio interface.

This parameter defines how many reconfigurations can be made in sequence.
The parameter defines the averaging window for spreading code load. RNC measures s
This
This parameter
parameter defines
defines the
the maximum
time periodnumber
during of Access
which Classes (AC0,
the averaged AC1,
length ...,NRT
of the AC9)sc
that are restricted in a cell at the sam
-This
10%parameter
indicates defines
that onethe time period
Access during
Class is barredwhich
in a the
cell UL load of the cell (due to th
-This
20%parameter
indicates defines
that twothe
ACs are barred at the same
time period during which thetimeaveraged length of the NRT sc
...
This
- 90%parameter
indicates defines
that ninethe time
ACs areperiod during
barred at thewhich
samethetimeUL load of the cell (due to tot
Note: All ACs must not be barred. The maximum restriction level must be used 90%.
The parameter defines the time interval how often the access class restriction level ca
This parameter defines whether the predefined set of PS NRT DCH bit rates is in
use.
This parameter defines the maximum channel coded bit rate before rate matching to
The
be bit rates
used with listedSFin128.
DLdefines the set
For are the maximum
bit rates higher than bit that
ratesdefined
that can bybe allocated to NRT
This
RAB. parameter the maximum channel coded bit rate before rate matching to
DLmaxBitRateSF128,
be theFormaximum DL SFthanwill be 64.
Anyused
This valuewith
thatDL
parameter SF
not16.
isdefines
listed
the inbit
therates
maximum higher
set is not allocated
channel that
coded defined
to
bitany
rateNRTby DLmaxBitRateSF16,
RAB.
before rate matching to
the
be maximum
used with DLDL SF
SF will
256. be
For8.bit rates higher than that defined by
SF can
This be reduced
parameter fromthe themaximum
maximumchannelvalue depending on the puncturing limit. to
The allowed bit defines
DLmaxBitRateSF256, rates are
the checked
maximum every
DL time
SF
codedthe
when
will be
bitbit
128.
rate
ratebefore rate matching
is selected
be
SF used
can with
by admission
This parameter DL
be reduced SF
control 32.
from For
or the
defines packet bit rates
themaximum
maximum higher
scheduler. value than that
Thedepending
channel check is,
coded defined
on the
bit however,
rate by DLmaxBitRateSF32,
puncturing
beforenotrate
donelimit.
in the to
matching
the maximum
following
be used cases:
with DLDLSF SF64.
willFor
be 16.
bit rates higher than that defined by DLmaxBitRateSF64,
SF can
The be reduced
parameter fromthe
defines themaximum
maximumpuncturing
value depending on thetopuncturing
ratio allowed be used inlimit.
DL DCHs.
- diversity
the maximum handover
DL SFinwill DRNC
be 32.
SF
-Thiscan be
UE parameterreduced
not involved from
indicates the maximum
the number
SRNS relocation in ofvalue
theTTIs depending
(10ms)
target on the puncturing limit.
RNC.after that Dynamic HSUPA BLER Algo
This
SF means
can be that
reduced the bit
from rate
the set does
maximum
This management parameter defines the L1 HARQ not restrict
value the retransmissions
dependingbit rate if the
on the UEthreshold
already
puncturing uses
limit. it. outer loop power control entities dedi
for the
This
Bit management
rates parameter
used by values
HSDPA defines the L1 HARQ retransmissions the threshold for the outer loop power control entities dedi
Note: Parameter 2UL
andreturn
3 willchannel
produceare notBLER
high restricted bytransmission.
for first bit rate set.
Also those values will increase SIR target in
This management parameter defines the L1 HARQ retransmissions threshold for the outer loop power control entities dedi
Note: Parameter
Note: values
Parameter 2 and
values 3 will
2 and produce
3 will producehigh BLER
high BLER forfor
firstfirst
transmission.
transmission. Also those
Also values
those willwill
values increase SIR
increase target
SIR in
target
The predefined the contains
bit rate set size of thethesliding averaging
following window for FP frames mea
uplink rates:
-This
0 kbps
parameter defines peak rate threshold in relation to UE max data rate. Paramete
- 8 kbps
This parameter defines peak rate threshold in relation to UE max data rate when E-DC
- 64 kbps
-This
128parameter
kbps defines peak rate threshold in relation to UE max data rate when E-DC
This management parameter defines the L1 HARQ retransmissions threshold for the outer loop power control entities dedi
The predefined bit rate set contains the following downlink rates:
This
-Note: parameter defines the throughput threshold in number of FP frames per second. Th
0 kbps Parameter values 2 and 3 will produce high BLER for first transmission. Also those values will increase SIR target in
-This 8 kbps
parameter defines minimum period which the BLER state must be bursty before
- 64 kbps
This
- 128parameter
kbps defines the priority levels of CS RAB that are used by emergency
calls. That
- 384parameter
This kbps is, the prioritythe
defines levels, which are
pre-emption equal toof
capability orCShigher
RABthan thatthe valuebyof this
is used
parameter.
emergency The values of this parameter are defined in
calls.defines the pre-emption vulnerability of CS RAB that is used decreasing order of priority,
Thisbeing
"1" parameter
the highest priority level and "14" being the lowest priority level. by
All combinations of those bit rates are also allowed.
emergency
The calls.
If
A CSparameter
this parameter
call defines
is setas
is identified whether
to thenthe
0, emergency
an headercall compression
all supported if its algorithm
in use. shall
bitAllocation/Retention
rates are reorder PDCP
Priority
A CS call is identified
parameters match with astheanvalues
emergency of the call if its Allocation/Retention
following parameters: Priority
The
A CSparameter
parameters defines
call is identified
match withasthe
theanlargest
emergency
values number
of thecall ofif compressed non-TCP headers
its Allocation/Retention
following parameters: Priority that may be
parameters
Compressed match with the values of the following parameters:
- Pre-emptionUDCP/IP capabilityorwith TCP/IP headers may not be sent more than the number of
RNAC-EmeCallPCIValue
-seconds
Pre-emptiongiven capability
by the with
value of RNAC-EmeCallPCIValue
this parameter after sending the last
- Pre-emption
This parametervulnerability
defines the
capability with
safety RNAC-EmeCallPVIValue
margin for transmitted power thatfull header.
is used whenTheAdmis
-parameter
-- Pre-emption
Priority is used
level with by thewith
vulnerability with
PDCP RNAC-EmeCallPCIValue
RNAC-EmeCallLevelValue.RNAC-EmeCallPVIValue
header compression algorithm.
ThePre-emption
parameter
Priority vulnerability
level with defines whetherwith RNAC-EmeCallPVIValue
RNAC-EmeCallLevelValue. the header compression function of the PDCP is employe
- Priority level with RNAC-EmeCallLevelValue.
Allocation/Retention the HSDPA
Priority parameters Discardare Timer value for the
not considered to beCommon
a factorMAC in Flow
Allocation/Retention
Priority
identifying Queues
emergency Priority
transmitting
calls parameters
BCCH,
if the CCCH
value ofare
thisnot
and considered
DCCH
parameter datais to
on
"RAB be a factor in
HS-FACH.
parameters Discard the
This parameter
Allocation/Retention
identifying controls
emergency the ifreset
Priority
calls parameters of theofMAC-ehs
theavalue are reorderingtofunctionality
not considered
RNAC-EmeCallPCIValue be a factor
is "RAB in areofnot
value
Timer defines
considered".
HSDPA MAC-ehs the time to live for MAC-ehs SDU starting from the instant of its
identifying
parameters
arrival into an notReset
emergency
areHSDPA Timer
calls
considered".
Priority
if the forvalue
Queue.
the Common MAC Flow Priority Queues
of RNAC-EmeCallPCIValue is "RAB
transmitting
parameters are BCCH, CCCH and/or DCCH data on HS-FACH. Timer in multiples of T1
not considered".
Pre-emption
values capabilityUsed
(milliseconds). is notwhen considered
MAC-ehs to be a factor in
reordering identifying
queue isnot emergency
reset in CELL_FACH calls
If
BTSboth
ifand
the can pre-emption
value use of it as
this a capability
delay
parameter and
information
is pre-emption
for
"Pre-emption guiding vulnerability
the
capability are
scheduling.
is not considered
considered". to be
CELL_PCH.
Pre-emption
factors vulnerability
in identifying is not considered
emergency calls, a CSto RAB be aisfactor in identifying
identified emergency
as an emergency call if
calls
its if the level
priority valueisofequal
this parameter
to or higher is than
"Pre-emption
the value vulnerability
of this is not considered".
parameter.
If
BTSboth pre-emption
might use the timercapability
to reset andthe pre-emption vulnerability are
HSDPA retransmission not associated
of the consideredMAC- to be
factors
ehs
If PDUs.
both in identifying
pre-emption emergency calls, a CS RAB is identified as an emergency call if
A
its CS RAB,
priority which
level iscapability
match identified
with the
and
as
value
pre-emption
an emergency
of
vulnerability
call, has special
RNAC-EmeCallLevelValue.
are not considered
handling in theto be
factors
following in features:
identifying emergency calls, a CS RAB is identified as an emergency call if
This parameter defines the identifier of the host operator for Inter Circle Roaming
This parameter
feature. The host defines L1 is
operator BLER target for
an operator theowns
who E-DCHtheMAC-d
RAN. flow of PS NRT service. It is used by the outer loop power c
This
Valueparameter defines
of the parameter L1 BLER
equals target
to the for
log10 the
of theE-DCH
BLERMAC-d
value. flow of PS NRT service. It is used by the outer loop power c
Examples:
This parameter defines L1 BLER target for the E-DCH MAC-d flow of PS NRT service when TTI = 10 ms. It is used by the
Value
10^-2
Value of
= the
the parameter
of0.01 equalsisto
i.e. BLER target
parameter the
to1%. log10 of
of the BLER value.
This parameter defines equals
L1 BLER the log10
target for the the BLERMAC-d
E-DCH value. flow of PS NRT service when TTI = 2 ms. It is used by the o
10^-1.3 = 0.05 i.e. BLER target is 5%.
Value
10^-1 of0.1
= thei.e.
parameter
BLER equals
target to the log10 of the BLER value.
Note:
10^-0.7BLER target
i.e.defined byisthis
10%.
isparameter is used after number of retransmission defined by parameter Retransmission
10^-1 = = 0.199
0.1 i.e. BLER BLER target
target is 10%. 20%.
This
High
Note:parameter
BLER
BLERvalues enables/disables
target increase
defined by thisthe
latency feature
due
parameter Load
to HARQ based
afterAMR codec
retransmissions
is used number mode
in L1.
of selection.
When E-DCH
retransmission TTI = by
defined 2 ms is used latency
parameter increase
Retransmission
High
Note: BLER values increase latency due to HARQ retransmissions in L1, especially this is valid when E-DCH TTI = 10 ms i
This timer defines the maximum time that BTS, cell, local cell group or traffic terminadefined by parameter Retransmission
BLER target defined by this parameter is used after number of retransmission
Note: BLER target
The parameter defined
defines the by this parameter
largest UDCP/IP oris TCP/IP
used after number
header sizeof
inretransmission
octets that ma defined by parameter Retransmission
This parameter defines the maximum number of re-attempts the RNC can perform when h
This
parameter defines the
the maximum
threshold of accessIdentifier
Context class restriction level. Ifnon-TCP
the access class restriction level goes above the th
Parameter defines the minimum forwarding period of the(CID) value
consecutive forAMR conne
rate control requests received from MGW and
This
parameter defines the
the length
threshold
of of access
the uplink class restriction
DPCCH power level. preamble
control If the access class restriction level goes above the th
period.
- the last digit of the IMSI of the UE matches the restricted access class and RNARDSACGuardTimer is not running.
If the Iu UP support mode version as the result of the Iu UP initialisation is 2, and the conditions for the filtering are valid, Iu
The
- theparameter
This last digit ofdefines
parameter indicates
the IMSItheofdownlink
whether
the UEthe power control range inaccess
RRC CONNECTION
matches the restricted relationclass
SETUP to the
message maximum
and al
size optimization
RNARDSACGuardTimer functionality
is notisrunning.
enabled.
If the minimum
When enabled, parameter
this value is
functionality used, UEs
introduces can be moved
message size to IDLE with
optimization forlow access
RRC: RRC class restriction level. If the
CONNECTION maximum
Value 255 ('OFF') of the parameter means that Iu UP support mode for predefined SDU sizes, versionSETUP
1 only ismessage, w
allowed for
Other option for optimizing RRC Connection Setup message is to use the Default Configuration (DC).
If the minimum parameter value is used, UEs are not moved to Cell_FACH/DCH with low access class restriction level. If th
The
If onefunctionality
of the above is applied
options in cells as enabled
is activated, with CMOB-TrafficRestriction.
RACH/FACH RB mapping information for SRBs is provided after the RRC connect
This parameter defines the guard time for the state transitions with RNAR and DSAC features. If the timer is running, then
The functionality is applied in cells as enabled with CMOB-TrafficRestriction.
The RRC CONNECTION SETUP message size is not optimized if either the value of this parameter is "Disabled" or the va
If the minimum value is used, the timer is not used and the state transitions can be done. This causes extra signaling beca
The complete parameter value descriptions are the following: 0 (Disabled), 1 (Default Configuration for rel6 and newer UE
The parameter defines the maximum Context Identifier (CID) value for TCP connectio
This parameter defines the multiplier that is used to multiply the Transfer delay
received from RANAP
This parameter definestowhether
get a value forthe
or not Discard Timer
zero size that is sent
transport blocktoofthe BTS. isThe
a DCH input t
Discard Timer is used in BTS to discard data packets that contain old data.
This parameter defines the maximum channel coded bit rate before rate matching to
be
Thisused
The with
result
parameter ULdefines
SF 128.
of multiply For
is rounded
the bit rates
maximumtowardhigher than
the closest
channel codedthat defined
value
bit of the
rate byfollowing
before list: 20, 40,
rate matching to
ULmaxBitRateSF128,
60,
be 80,
used100,
with 120,
UL 140,
SF 16.the
160,
Formaximum
180,
bit rates UL
200, SF
250,
higher will
300,
than be
400,64.
that 500, 750,
defined by 1000, 1250, 1500,
ULmaxBitRateSF16,
This
1750,parameter defines
2000, 2500, 3000, the maximum
3500, channel coded bit ms.
rate before rate matching to
the
be maximum
used with ULSF
UL SF will be
256. 8.bit4000,
For rates
4500,
higher
5000,
than
7500
that defined by
SF can be reduced from the maximum value depending
This parameter defines the maximum channel coded bit rate on the puncturing
before limit. to
rate matching
ULmaxBitRateSF256,
be the maximum UL SF will be 128.
Thisused
SF can with
be ULdefines
SF from
reduced
parameter 32. the
For bit rates higher
themaximum
maximum valuethan
channel that defined
depending
coded on the
bit rate bypuncturing
ULmaxBitRateSF32,
before limit. to
rate matching
the
be maximum UL SF will be 16.
Thisused
SF can with
be ULdefines
SF from
reduced
parameter 64. the
For bit rates higher
themaximum
maximum valuethan
channel that defined
depending
coded on the
bit rate bypuncturing
ULmaxBitRateSF64,
before limit. to
rate matching
the
be maximum UL SF will be 32.
Theused
SF can with
be ULdefines
SF from
reduced
parameter 8. For bit
the
the rates higher
maximum
maximum than
value
puncturing that
dependingdefined
ratio bytoULmaxBitRateSF8,
on the
allowed puncturing
be used inlimit.
UL DCHs.
the maximum UL SF will be 4.
SF can be reduced from the maximum value depending on
This parameter defines the minimum value of the uplink scrambling code. the puncturing limit.
SF can be reduced from the maximum value depending on the puncturing limit.
From RN4.0 Inc 1 onwards, this parameter is used for defining the start of the
This parameter
scrambling codedefines
value and the period
the rangeduring which
of the thescrambling
uplink DL transmitted
codes power haspossible
that are to be
corrected
to allocate to
in the
the reference
RNC. The power.
range of the uplink scrambling
This parameter defines the convergence rate (towards the reference power) used codes allocated by RNCfor
starts
the from
associated the value
Adjustmentof the UlScrCodeMin parameter and the last value
Period.is under calculation, the Ideal BLER target for of the uplink
When
Setting athis
scrambling newcode BLER
parameter for to
E-DPDCH
a small value
is UlScrCodeMin + themakes
number power balancing
of ICSU units * faster, whereas E-
the maximum
DPDCH
setting
number
The is
itof ina main
tousers
parameter large
isperrole
value
used and also the
in makes
ICSU. normal itmodeDPDCH
slower. theBLER difference (measured versus
Large
ideal) values
is taken cause
into underestimations
account. DPDCH toby
BLER power WCDMA
difference is
BTSIftothe
corrections.
weighted
calculate
value
by thisisthe power
zero,
weighting power
increase/decrease
is
The corrected
DLparameter.
inner to the
loop step
DL size
reference
PC step when receiving
power.
sizedepends
is used inonnormal TPC commands.
mode by This parameter is
factor
Actually
applied the last
when indexed
Continuous value the value thethe
of and WCDMA BTSFor
UlScrCodeMin. to calcul
This parameter defines thePacketminimum Connetivity (UE
interval between DTX, two SIRso target
on) is activated
modification for commands
the sent by OLPC entity of UL N
example,
When
UE. a new if the BLERvalueforisDPDCH
set to 16777215, it continuesthe
is under calculation, allocation
Ideal BLERfrom target
the value
for 8192.
The value of this parameter is used if RNFC-FasterOLPCEnabled parameter is set to Enabled. Otherwise, the RNC interna
If the maximum
DPDCH is in main number
role and of ICSU units
also the is 4 and the
E-DPDCH maximum
BLER number
difference of users
(measured in RNC
versus
If the minimum value of the parameter is used, OLPC entity sends SIR modification command more frequently than if the m
is 8192,
ideal) then RNC
is taken allocatesE-DPDCH
into account. the value 16777215 and values
BLER difference from 8192
is weighted to 40959.
by this weighting
This
factorParameter
parameter.defines the minimum step size of the SIR target modification a PC Entity of UL NRT return channel can req
The
Defines theof
value
uplink this factor
scrambling
gain parameter
code
for the used, ifpart
is control
unique RNFC-FasterOLPCEnabled
for each
of a MS and itmessage
PRACH parameter
is used continuously,
when the data iseven
set to
part ifsyEnabled. Otherwise, RNC internal c
If
thethe minimumisvalue
frequency of parameter
changed. The first is used, OLPC
0...8191 adjustcodes
scrambling SIR target more frequently
are reserved to be in smaller steps than if the maximum v
Defines the gain factor
used in inter-RAT for thefrom
handovers control
GSM part
to of a PRACH message when the data part sy
UTRAN.
Defines the gain factor for the control part of a PRACH message when the data part sy
All uplink physical channels are subjected to scrambling with a complex-valued
Defines the gain factor for the control part of a PRACH message when the data part
scrambling code. The UL DPCH will be scrambled with a long scrambling code.
symbol
Defines ratethe gainis 60factor
ksps. for the data part of a PRACH message when the data part
symbol
Defines ratethe gainis 120 ksps.for the data part of a PRACH message when the data part
factor
symbol rate is 15 ksps.
Defines the gain factor for the data part of a PRACH message when the data part
symbol
Defines rate is 30factor
the gain ksps. for the data part of a PRACH message when the data part
symbol
Defines rate is 60
a time ksps.(in terms of a number of slots) during which the accumulated po
period
When RNC calculates a new reference power for base stations, it is not updated to
the
Thebase stations
reference if it does
power not differtofrom
(proportional the CPICH
a cell's existingpower)
reference power by
is defined in the base the l
choosing
stations at least by a value defined by this parameter.
Step Size for DCH BLER is a weighting coefficient which defines how big the DCH
BLER
Setting target
Step Sizethisforimpact
EDCH to
parameter theaDelta
to
BLER small
is SIR
value,is during
a weighting such the1dB,
as
coefficientDCH Outer
causes
which Loop
the
definesnewPower
how bigControl
reference
the EDCH
Entity
power
BLER calculation.
to be
target updated
impact toto the
the related
Delta SIR base
is stations
during the every
EDCH time the
Outer measurement
Loop Power reports
Control
This
arriveparameter
and determines
setting it to a thevalue
larger maximum causes length
the of the DTXpower
reference period.
to During
be the
updated DTX
moreperiod the in-active UL OLPC entity is
Entity
0 : DTXcalculation.
period value defined as internal constant (200 ms)
seldom.
First slot after the transmission gap: uplink DPCCH power calculation is performed us
1 : DTX period is fixed as zero so that all OLPC entities are always at least semi-active state and able to send SIR target in
This
The RNC based
value parameter is used
of thisthis byRNFC-FasterOLPCEnabled
the UE when in compressedparametermode. TheisRecovery Peri
In other words, parameter used,
can beif used to limit the amount of messaging traffic set to Enabled. Short description Thi
related to reference power updates.
This parameter defines the threshold of access class restriction level. If the access class restriction level goes above the th
-This
the parameter
last digit ofdefines
the IMSI theofthreshold
the UE matches
of access theclass
restricted access
restriction class
level. in the
If the current and in the following restriction step
access
If the minimum parameter value is used UE's will be permitted
class restriction level equals or exceeds the threshold in the cell, whenever UE to do the RRC connection after the release sooner than if th
This parameter defines the threshold for the RNC average unit load to start access cla
becomes active in Cell_PCH state, the RNC does not transfer the UE to Cell_FACH
The parameter defines how the DL load value is determined in Load type Iur Common mea
or Cell_DCH.
The UE is released if the following is true:
- the last digit of the IMSI of the UE is among the barred access classes in the current
The
and theparameter defines the
next restriction stepnumber of frames after the PC preamble period during
which
or the transmission of data on the RRC Signalling Radio Beares should be
suspended
- the last digit of the IMSI ofSRB
by the UE. The the UEdelay can bethe
is among applied to access
barred the physical
classeslayer only in the
The
currentparameter
synchronization defines
restriction the A
procedure
step and paging
thewhen response
guardthetimer restriction
first radio
set setper
linkthe
with CN domain.for
is established
parameter Valid
thewhen
UE. R
RNARDSACGuardTime
The parameter defines routing is not running.
area update, location update and initial direct transfe
The UE is kept in Cell_PCH state if the following is true:
The parameter defines the origin of the last configuration action affecting the object.
- the last digit of the IMSI of the UE is among the barred access classes only in the
This
currentparameter
restrictionis step
the identifier
and the for thethe RNAC
guard timer object.
set with the parameter
RNARDSACGuardTime is running.
The timer is used for inactivity detection of the signalling link in CELL_DCH state. The
If the is
timer minimum
set afterparameter
inactivity ofvalue is used, the
the signalling linkUEs are prohibited
is detected fromwhen
and reset transitioning
any activity
from Cell_PCH
detected. to Cell_FACH/DCH with low access class restriction level. If the
maximum parameter value is used, the UEs ar prohibited from moving from
Cell_PCH
In expiry oftotheCell_FACH/DCH only when
timer, a state transition theCELL_DCH
from maximum number of accessstate
to CELL_FACH classes
is are
restricted.
initiated when also the corresponding RB inactivity timer(s) expired.
PtxTotal (0), Ptxnctotal (1), PtxnonHSPA ( Ptxnctotal (1) Ptxnctotal (1)

0...100, step 1 10 10
1...60 s, step 1 s 10 s 10 s
5...60 s, step 1 s 20 s 20 s
5...60 s, step 1 s 20 s 20 s
5...60 s, step 1 s 30 s 30 s
5...60 s, step 1 s 30 s 30 s
10...90 %, step 10 % 90 % 90 %
10...600 s, step 1 s 30 s 30 s
Predefined bit rate set is not in use (0),Predefined
Pr bit rate set is not in Predefined
use (0) bit rate set is not in use (0)
0...1080 kbps, step 1 kbps 75 kbps 75 kbps
0.4 (0), 0.44 (1), 0.48 (2), 0.52 (3), 0.56 ( 0.6 (5) 0.6 (5)
1...10, step 1 1 1
1...3, step 1 1 1
1...3, step 1 1 1
1...3, step 1 2 2
0.1...5 s, step 0.1 s 1.5 s 1.5 s
10...100, step 1 80 80
10...100, step 1 80 80
10...100, step 1 80 80
1...3, step 1 1 1
10...100 frame, step 10 frame 10 frame 10 frame
0...5 s, step 0.1 s 2s 2s
1...14 number, step 1 number 14 number 14 number
May trigger pre-emption (0), Pre-emption May trigger pre-emption (0) May trigger pre-emption (0)
capability
Pre-emptionis not considered
vulnerability (1), RAB
is not Pre-emption vulnerability
Pre-emption
is vulnerability is not considered (0)
parameters
considered are not considered (2)(1)
Reordering (0), Not pre-emptable
not expected (0), Reordering not considered
0 (0) 0
1...65535, step 1 256 256
1...255 s, step 1 s 5s 5s
0...3 dB, step 0.5 dB 0 dB 0 dB
Header compression not used (0), Algori Header compression not used (0)
Header compression not used (0)
Discard Timer not used (0), 20 ms (1), 40 40 ms (2) 40 ms (2)
1...4, step 1 2 2
1 to 5, step 1 (255, not defined) 255 255
-2...0, step 0.1 -1 -1
-2...0, step 0.1 -0.7 -0.7
-2...0, step 0.1 -1 -1
-2...0, step 0.1 -1.1 -1.1
disabled (0), enabled (1) disabled (0) disabled (0)
0...10 s, step 0.1 s 3s 3s
60...4096 octets, step 1 octets 168 octets 168 octets
1...10, step 1 2 2
3...65535, step 1 15 octets 15 octets
0...25 dB, step 1 dB 20 dB 20 dB
0...255 s, step 1 s 255 s 255 s
10...100 %, step 10 % 0% 0%
10...100 %, step 10 % 0% 0%
1...900 s, step 1 s 30 s 30 s
Disabled (0), DC for rel6 UEs and CC with Disabled (0) Disabled (0)
3...255, step 1 15 octets 15 octets
0.5...15, step 0.5 3 3
Bit 0: UL CS speech class A DCH, Bit 1: U 16384 16384
0.4 (0), 0.44 (1), 0.48 (2), 0.52 (3), 0.56 ( 0.68 0.68
8192...16777215, step 1 1000000 1000000

0...100, step 1 0 0
0.1...0.5, step 0.1 0.2 0.2
0.5 dB (0), 1.0 dB (1), 1.5 dB (2), 2.0 dB ( 1.5 dB (2) 1.5 dB (2)
0.5 dB (0), 1.0 dB (1), 1.5 dB (2), 2.0 dB ( 1.0 dB (1) 1.0 dB (1)
1...5, step 0.5 2 2
100...700 ms, step 100 ms 200 ms 200 ms
0.1...0.3 dB, step 0.1 dB 0.1 dB 0.1 dB
1...15, step 1 10 10
1...15, step 1 13 13
1...15, step 1 12 12
1...15, step 1 11 11
1...15, step 1 15 15
1...15, step 1 15 15
1...15, step 1 15 15
1...15, step 1 15 15
1...10 slot, step 1 slot 8 slot 8 slot
1...6 dB, step 1 dB 3 dB 3 dB
0.1...1 dB, step 0.1 dB 0.3 dB 0.3 dB
0.01...0.1 dB, step 0.01 dB 0.03 dB 0.03 dB
DTX period value defined as internal const
DTX period value is fixed as zero
DTX(1)period value is fixed as zero (1)
TPC value used (0), TPC value not used ( 0 0
Not Used (0), Used (1) 0 0
60...100 %, step 10 % 80 % 80 %
60...90 %, step 10 %, Functionality is not Functionality is not used (0) Functionality is not used (0)
used (0)%, step 1 %
10...90 10 % 10 %
PtxTotal is checked (0), Spreading
Both PtxTotal
code u and spreading code
Both
usage
PtxTotal
are and
checked
spreading
(2) code usage are checked (2)
All paging responses are restricted (0),All

C paging responses are restricted
All paging
(0) responses are restricted (0)
All RAU/LAU are restricted (0), CS domainAll RAU/LAU are restricted (0) All RAU/LAU are restricted (0)
Not defined (0), Network originated config Not applicable Not applicable
0...20 s, step 0.5 s 2s 2s
RNC2600
Ptxnctotal (1)
10
10 s
20 s
20 s
30 s
30 s
90 %
30 s
Predefined bit rate set is not in use (0)
75 kbps
600 kbps
27 kbps
309 kbps
133 kbps
0.68
1
1
1
2
1.5 s
40
40
40
1
10 frame
2s
14 number
May trigger pre-emption (0)
Pre-emption vulnerability is not considered (0)
0
256
5s
0 dB
Header compression not used (0)
40 ms (2)
2
255
-1
-0.7
-1
-1.1
disabled (0)
3s
168 octets
2
15 octets
0 frame
19 dB
10 s
0%
0%
30 s
Disabled (0)
15 octets
3
16384
30 kbps
273 kbps
15 kbps
120 kbps
70 kbps
500 kbps
0.68
8192
2 frame
0
0.2
1.5 dB (2)
1.0 dB (1)
2
200 ms
0.1 dB
10
13
12
11
15
15
15
15
8 slot
3 dB
2 dB
0.3 dB
0.03 dB
DTX period value is fixed as zero (1)
0
0
80 %
Functionality is not used (0)
10 %
Both PtxTotal and spreading code usage are checked (2)
7 frame
All paging responses are restricted (0)
Not applicable
Not applicable
2s
Comments
Default matches previously hardcoded value
Increased to 19 dB following trial. Please refer to Trial report UKRE/12/066 for further details
Changed to 16384 July 2008
Changed to 70 kbps July 2009 for TBO rollout
Validated/amended February 2009 as part of HSPA and Second Carrier development.

RAN1644 Continuous Packet Connectivity

Default matches previously hardcoded value

Parameter Type? IPD PTY ID
Discrepancy - Criticality


10687
12000
12001
12002
12003



10869
10834
10778
10914
10947
10871


10827
10791
10843
10794
10686
10854
10889
10744


Discrepancy Checking Frequency New in RU20 New in RU20 on TOP

Monthly
Weekly
Weekly
Weekly
Weekly
Weekly
Monthly

Monthly
Monthly
Daily New in RU20
Weekly
Monthly

Monthly
Weekly
Weekly
Weekly
Weekly
Weekly
Weekly
Weekly
Monthly

Monthly
Weekly New in RU20
Weekly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Weekly
Monthly
Monthly
Monthly
Monthly
Daily
Daily
Weekly
Daily New in RU20
New in RU30
Daily
New in RU40
New in RU40
New in RU40
New in RU40
New in RU40
New in RU40
New in RU40
New in RU40
New in RU40
New in RU40
New in RU40
New in RU40
New in RU40
New in RU40
New in RU40
New in RU40
New in RU40
New In RU50 EP1
New In RU50 EP1
New In RU50 EP1
New in RU30
New in RU30
New in RU30
New in RU40
New in RU40
New in RU40
New in RU40
New in RU40
New in RU40
New in RU40
New in RU40
New in RU40
New in RU40
New in RU40
New in RU40
New In RU50 EP1
New in RU40
New in RU40
New in RU40
New in RU30
Issue in Which Parameter Added or Last Changed
4.50
4.50
4.50
9.00
9.00
9.00
9.00
9.00
8.00
9.00
8.00
8.00
8.00
8.00
9.00
8.13
8.13
8.13
8.00
9.00
8.00
9.00
9.00
9.00
4.50
9.00
8.00
8.00
8.00
9.00
4.50
9.00
8.10
9.00
9.00
9.00
9.00
4.50
9.00
4.00
9.00
8.00
8.00
8.00
9.00
9.00
8.00
9.00
RNC Parameters
Abbreviated Name

RTservicesForPS
Telecom Parameters
CommonMCC
CommonMNC
CommonMNCLength
CSAttachDetachAllowed
EmergencyCallRedirectTimer
ExtendedULDLactivationTmr
LCSfunctionality
LCSSupportForAnchoring
LTEPeriodicTriggerTimer
MACLogicalChPriority - MACLogChPriSRB1
MaxAMRCapacityErl
N302
N304
N308
PageRep1stInterv
PageRep2ndInterv
RANAPprocInitWait
RCPMtputDLCl01to02Range
RCPMtputULCl01to02Range
RestrictionInterval
RncId
SIB1_priority
SIB11_priority
SIB15_priority
SIB18_priority
SIB19Priority
SIB2_priority
SIB3_priority
SIB5_priority
T302
T304
T305
T307
T308
T309
T314
T316
T317
ToAWE_NRT_DCH_tti10
ToAWE_NRT_DCH_tti20
ToAWE_NRT_DCH_tti40
ToAWE_RT_DCH_tti10
ToAWE_RT_DCH_tti20
ToAWE_RT_DCH_tti40
ToAWE_Speech
ToAWS_NRT_DCH_tti10
ToAWS_NRT_DCH_tti20
ToAWS_NRT_DCH_tti40
ToAWS_RT_DCH_tti10
ToAWS_RT_DCH_tti20
ToAWS_RT_DCH_tti40
ToAWS_Speech
TraceLCSHorizAccur
TraceLCSPriority
TraceLCSVertAccur
TraceLCSWaitPeriod
UePeriodicMeasCpuLimit
UePeriodicMeasInterval
UL_DLcapacityReqWait
WCELIdleAlarmTimeout
PWSMDuration
PWSMExceededTrafficDur
Performance Management Parameters
DLBLERConfInterval
ULBLERConfInterval
OMSIpAddress
RNCFQDN
RNCIPAddress
RNCName
CBCSourceIPAddress
DSCPStatisticsGroupA
DSCPStatisticsGroupB
DSCPStatisticsGroupC
DSCPStatisticsGroupTCPack
O&M Parameters
ActivePRNC
AlarmSetforWCELBLINIT
AutomObjLock
ConnectionRetryCounter
FullConsCheckRequest
MaxCarrierConnectivity
MaxIubPSThroughputMbps
OMSBackupIpAddress
RCPMtputAggregationLevel
RNCChangeOrigin
RncClientTLSMode
RncOptions
SecOMSIpAddress
ServingOMS
ServingOMSAdminSetting
ServingOMSSwoRequest
Full Name
Managed Object
Processing of PS domain RT service request in RNC RNC
Common MCC RNC

Common MNC RNC
Common MNC Length RNC
Attach-detach allowed RNC
Emergency Call Redirect Timer RNC
Extended Cell_FACH Inactivity supervision timer RNC
LCS functionality RNC
LCS Support for Anchoring RNC
LTE Periodic trigger timer RNC
MAC logical channel priority for SRB1 RNC
Maximum number of simultaneous AMR RABs RNC
N302 RNC
N304 RNC
N308 RNC
Repetition interval of the first repeated connected mode paging procedure RNC
Repetition interval of the second repeated connected mode paging procedu RNC
RANAP initiation timer RNC
RCPM DL throughput class 01 to class 02 range limit RNC
RCPM UL throughput class 01 to class 02 range limit RNC
Restriction Interval RNC
RNC Identifier RNC
Priority for SIB1 RNC
T302 RNC
T304 RNC
T305 RNC
T307 RNC
T308 RNC
T309 RNC
T314 RNC
T316 RNC
T317 RNC
Time of Arrival Window Endpoint for NRT DCH (TTI 10) RNC
Time of Arrival Window Endpoint for RT DCH (TTI 10) RNC
Time of Arrival Window Endpoint for speech services RNC
Time of Arrival Window Startpoint for NRT DCH (TTI 10) RNC
Time of Arrival Window startpoint for NRT DCH (TTI 20) RNC
Time of Arrival Window Startpoint for NRT DCH (TTI 40) RNC
Time of Arrival Window Startpoint for RT DCH (TTI 10) RNC
Time of Arrival Window Startpoint for speech services RNC
Trace LCS Horizontal Accuracy RNC
Trace LCS Priority RNC
Trace LCS Vertical Accuracy RNC
Trace LCS Wait Period RNC
UE Periodic Measurement Report CPU Limit RNC
UE Periodic Measurement Report Measurements Interval RNC
Waiting time for UL/DL capacity request RNC
WCEL Idle Alarm Timeout RNC
Duration of low traffic for cell shutdown RNC

Time limit for traffic to activate a shutdown cell RNC
Downlink measured BLER confidence interval RNC

Uplink measured BLER confidence interval RNC
OMS IP-address RNC

RNC fully qualified domain name RNC
RNC IP-address RNC
RNC name RNC
Source IP address for IuBC interface RNC

DSCP statistics group A RNC
DSCP statistics group B RNC
DSCP statistics group C RNC
DSCP code for DL TCP Ack statistics RNC
Active Physical RNC RNC

Alarm Set for WCEL BL-INIT RNC
Automatic object locking allowed RNC
OAM Connection Establishment Retry Counter RNC
Full Consistency Check Request RNC
MaxCarrierConnectivity RNC
Maximum downlink Iu-PS throughput RNC
OMS Backup IP Address RNC
RCPM throughput counters aggregation Level RNC
Change origin RNC
RNC Client TLS Mode RNC
RNC Options RNC
Secondary OMS IP address RNC
Serving OMS RNC
Serving OMS Admin Setting RNC
Serving OMS Switchover Request RNC
Group Description
AC This parameter defines whether PS domain RT services are available in the RNC or not.
Telecom MCC (Mobile Country Code) part of Common PLMN Id. Common PLMN Id is used to
Telecom represent
This parameter all thedefinesoperators MNC in the(Mobile multi-operator
Network Code) core network.
part of Common MCC consists PLMN of Id. three
digits.
Common MCC together
PLMNdefines with
Id is used MNC identifies
to represent the
all theare Common
operators PLMN id.
Telecom This parameter whether 2 or 3 digits used in in Mobilethe multi-operator
Network Code. core
MNC (
network. MNC consists of two or three digits. MNC together with MCC identifies the
Telecom Common
This
Common PLMN
parameter
PLMNdeterminesid
Id. (CommonMCC and CommonMNC)
whether or not IMSI attach and detach are allowed. should not be the same as
any PLMNid in RNC-IuOperator
Telecom This parameter sets the timer value for the emergency call redirect feature. The
0 = MSs should
Common
emergency PLMN not
callisredirect apply
Id (CommonMCC the IMSI
feature attach
and
redirects and detachcalls
CommonMNC)
emergency procedure,
cannot to the beGSM the same network as any
unless
Telecom CommonMCC
This
1 =
PLMNId MSsparameter
should
in modifiable
defines
apply
RNC-IuOperator. theanIMSI onlyattach
extended when there
Cell_FACH
and is nostate
detach WCEL whose
inactivity
procedure. WCELPLMNid
supervision timeisused
a second emergency
exact same with CommonMCC/CommonMNC call from the same mobile is done within the time limit set by
Telecom The parameter.
this operator can enable or disable the LCS functionality with this parameter. If the pa
This parameterisismodifiable
CommonMNC given onlyonly for the when CStheredomain. is no(Part WCEL of the whose CS domain
WCELPLMNId specific isNAS System informat
Telecom This
If Commonparameter PLMN enables and disables
id CommonMCC/CommonMNC.
is defined, WCELCSCNIdthe LCS Support and WCELPSCNId in the Drift RNC should feature.
not beIf this f
exactly the same as
Telecom configured
This parameter defines is part ofthe System time during Information which Block UE remains 1. in CELL_DCH for PS
Telecom service(s),
This parameter and at the expiry
defines MACoflogical the timer channelmeasurement
priority forare started Radio
Signalling for LTEBearer1 layering /
handover. When LTE capable UE having PS RAB(s) enters in CELL_DCH, and starts
Telecom This
data parameter
activity, thisdefines timer isMAC set. If logical
the data channelactivity priority
continuesfor Signalling
and timer Radio
expires, Bearer2 then
Telecom measurements
This parameter are defines initiated,
MACand logical timer is set again.
channel priorityIffor theSignalling
measurements Radio are Bearer3
successful, then UE is redirected / handed over to LTE system. If the measurements
Telecom This parameter reports
are unsuccessful, and UE's the maximum data activity value as presented
continues, then atinthe AMR Erlangs
expiry of timerLicence.
Telecom (periodic
This counter timer), measurements
is used to define the are started again.
maximum number of retransmissions of the R
If this UE is triggered by any other trigger, and the trigger is unsuccessful (UE is not
Telecom This counter is usedover to define thesystem),
maximum number of retransmissions of the
redirected / handed to LTE and UE continues its data activity in RR
Telecom This counter then
CELL_DCH, is used to define
timer is set,the Themaximumtriggers T1-T3 number (asofmentioned
retransmissions in WCEL- of the
Telecom SmartLTELayeringEnabled)
This parameter defines an interval can happen between anythe time.first connected mode paging
If the
procedure value of
and this
the parameter
first repeated is set to
paging too short,
procedure and manyno LTE capable(aUEs cell after
Telecom This
remaining parameter this defines
short time anininterval
CELL_DCH between shall the movefirstwhenrepeated
to LTE
response
and the
system, even second
though
update)
is received
repeated from
paging the MS
procedures. during the period. The repetition is used in UTRAN and CN
Telecom users
The
originated of these
timer is used
paging UEs for were having
supervising
procedures good end-user
a reception
in CELL_PCH of aexperience.
and RANAP procedure
URA_PCH states. (RAB
If the value of
assignment this parameter
request, Iu release is set
command,to too long, and
frommany
etc.)between theDL LTE capable
PS-CN during UEssignalling
after
Telecom This
When
remaining parameter
the value
for suchdefines
of long the
PageRep2ndInterv
time range
in limit is
CELL_DCH in set
kbps into zero,
WCDMA the second
cell class
may 1 and 2the
paging
experience for difficulty
RCPM
repetition is
connection
The
user actual
throughput establishment
repetition countersinterval phase
i.e. depends in CELL_FACH
parameter on the
value DRX
is and
the cycle CELL_DCH
upper lengthlimit value
of states.
class1 (cell-specific
and lower
Telecom not executed
compared
This parameter to and
being only
definesin the
LTE the DRX
system
range cycle
limit length
in kbps is between
used during DL the first 2repeated
classes and 3 forpaging
RCPM
UTRAN
limit
procedure.of DRX cycle length coefficient or CN domain specific DRX cycle length
class2.
Telecom user
The throughput
timer
coefficient)
This parameterstarts
useddefinescounters,
when
in thethe paging that
theinitialrange is,UE the
procedure
limit parameter
message and is
in kbps the value
forwarded
interval
between isDL the upper limit
istowards
evaluated
classes the
3 and ofthe
PS-CN.
by 4class2
forRRCThe
RCPMand
lower
timer
entity
user limit
stops
asvalue of
follows:
throughput class3.
when a RANAP
counters , thatprocedure
is, limit (e.g.
the parameter RAB assignment)
value is is received from the
Telecom Default
This
The
CN. parameter
default '4kbps'
value defines
'8kbps'shallthe isbe range
usedused asas upper
in kbps
upper limitlimit of of
DLDL
between DLthe
class1
class2
upper
and
classes
and lower4limit
lower and of
limit 5class3
limit of of
for DLand
RCPM
DL
the
class2
user lower when limit
throughput of
feature class4.RAN2555
counters, that is not
is, the active.
parameter value isDL theclasses
upper limit of class4 and
Telecom class3
This
the when
parameter
shortest therepetition
featurethe
defines RAN2555
periodrange is not
islimit
always active.
in kbps
one betweenDRX cycle length 5 and 6 for RCPM
the
In the lower limit
expiryless of
of the class5.
timer, if is the connection was established towards the of PS-CN, there
Telecom user throughput
Thisperiods
The default
parameter value counters,
than 200ms
'16kbps'
defines thethat are
used
range is,not the
limit parameter
asused
upper
in kbps limit value
of DL is
between theclasses
class3
DL upper
and lower limit
6 and 7class5
limit ofRCPM
for DL and
does
the
class4
user
not
lower
if the exist
limit
period
when
throughput theany
of RABsby
class6.
defined
feature
counters,
forPageRep1stInterv
RAN2555 this MSis and not the supervision
active (or PageRep2ndInterv)timer covers less than
Telecom The
This default
parameter value
SignConnActivitySupervision
two DRX cycles,
'32kbps'
defines
the value thethat must
isrange is,bethe
is set
(in limit
certainto
parameter
used as thebetween
'0incases)
kbps
seconds'.
value limit
upperA release
increased
isDL theof upper
ofDL
classes
approx. the
limit
class4
7 and
Iu
of
and8class6
connection
50...100ms
theRCPM
for to
and
lower
is
the
limit lower
of DLlimitclass5 of counters,
class7.
when thethat feature RAN2555 is not
Telecom user
requested
The
ensure,
This throughput
default
that
parameter from
value the
the defines SGSN
'64kbps'
original and
the and
must is,
repeated
range bethe
the MS parameter
used
limit is kbps
switched
as
paging
in the upper
messages
between toactive.
value theisDL
limit the
idle
are of upper
mode.
DLsent
not
classes limit
class5 in of
8Otherwise
and and
the 9class7 the
theRCPM
same
for and
lower
the
MS
limit lower
isof
RRC:PAGING
user DL limit
handled
throughputclass6 of
as
TYPE class8.
defined
when
counters,1 by
feature
message SignConnActivitySupervision.
RAN2555
to the MS.is not active.
Telecom The
This default
parameter value '128kbps'
defines thethat must
range is, be the
limit parameter
used as the
in kbps value
upperislimit
between DL theclasses
upper
of DL class6limit
9 and ofand
10class8the and
for
the
lower
RCPM lower
limit
user limit
of DLof
throughputclass9.
class7 when
counters, the RAN2555
that is, the feature is not active.
Telecom The
When
This default
the
parameter value
value of'256kbps'
PageRep1stInterv
defines the range must be limitused
is inset as
kbps toparameter
the
zero, upper
between value
limit
the paging
DL ofisDL
classes theclass7
repetition
10upperand and
is limit
notthe
11 of
used
for
class9
lower
and also
RCPM and
limit
user the
of
thevalueDL lower
class8
PageRep2ndInterv
throughput limit
when of
counters, class10.
the RAN2555
isbe interpreted
that is, the feature
as upper
parameter is not
zero (regardless
valueactive. is the ofupper
the real limitvalue
of of
Telecom The default '512kbps' must used
This parameter defines the range limit in kbps between DL classes 11 and 12 for as the limit of DL class8 and the
the parameter).
class10
lower and
limit of the
DL In this limit
lower
class9 case
when ofonly the
class11.
the DRX cycle
RAN2555 feature length is is used
not active. during the paging
Telecom RCPM
The
This defaultuser value
parameter throughput '1000kbps'
defines counters,
the range mustthat is,
be used
limit theas
in kbps parameter
the upperDL
between value
limit is DL
of
classes the12 upper
class9and limitand
13 for of
the
procedure.
class11
lower
RCPM and
limit of
user valuethe
DL lower
class10
throughput limitwhen of
counters, class12.
the RAN2555 feature is not active.
Telecom The
This default
parameter '2000kbps'
defines the range mustthat is,
be used
limit theas
in kbps parameter
the upperUL
between value
limit is DL
of
classes the1class10
upper
and 2limit ofthe
andRCPM
for
class12
If the
lower
user MS and
limit has
throughputof the
not
DL lower
responded
class11
counters, limitwhen of toclass13.
the
the first
RAN2555 repeated feature paging is notprocedure,
active. the second
Telecom The
This
repeated
default
parameter value
paging
'4000kbps'
defines
message thethat isrange
is, the
must
sent limit
be parameter
used
in kbps
as defined
as between
the value
upper
by a management
isUL the
limit upper
of DL limit
classes 2class11
parameter and of3class1
andRCPM
for theand
the
lower
user lower
limit limit
throughputof DLof class2.
class12
counters, when the RAN2555 feature is not active.
Telecom The default
PageRep2ndInterv.
This parameter value '8000kbps'
defines thethat range is, the
must be parameter
limit used
in kbps as between
the value
upper isUL the
limit upper
of DL limit
classes 3class12
and of4class2
andRCPM
for and
the
the
lower
user lower
limit limit
throughputof DLof class3.
class13
counters, when the RAN2555 feature is not active.
Telecom The
This
Note:
default
parameter
The
value
exact
'250kbps'
defines
values thethat
for
must
range is, be
PageRep1stInterv
the
limit parameter
used as the
in kbps value
upperislimit
between
and PageRep2nd UL theclasses
upper
of UL class1
Interv
limit
4 and ofand
should5class3
forthe
beRCPMand
the
lower
user lower
limit limit
throughputof ULof class4.
class2 when the RAN2555 feature is not active.
The
defined default
based value oncounters,
'500kbps'
experiments thatmust is,
and the
be parameter
used
success as-rate thevalue
upper
statistics islimit
the upper
of
obtainedUL class2limit
fromofand class4
the the and
real
the
lower lower
limit
radiodefault
networklimit
of ULof class5.
class3
environment. when the RAN2555 feature is not active.
The value '1000kbps' must be used as the upper limit of UL class3 and the
lower limit of UL
The default value '1500kbps' class4 when must the RAN2555be used as feature
the upper is notlimit active.of UL class4 and the
lower limit of UL class5 when the RAN2555 feature is not active.
The priority of the System Information Block 11, which is used by the scheduling algorithm in the RNC
Telecom The parameter defines the length of the traffic restriction period in the RNC when 'Ra
The parameter defines the priority of the System Information Block 15, which is used by the scheduling
Telecom 1=
A highest
unique priority
identification for an RNC node within the UTRAN. The RNC identifier together w
The
4 = prioritypriority
lowest of the System Information Block 18, which is used by the scheduling algorithm in the RNC
Telecom 1 = highest
The priority priority
of the System Information Block 1, which is used by the scheduling
This
4 = parameter
lowest
algorithm the defines
RNC to the
priority
in givepriority of the System
precedence Information Block 19, which is used by the schedulin
to the SIB.
Telecom 1 = highest
System priority
Information Block 11 shall have lower priority than SIB 1, SIB2, SIB3, and SIB5. The value of t
4
1 = lowest priority
Telecom 1== highest
System priority
Information
highest priority Block 15 priority shall have lower than SIB 1, SIB2, SIB3, and SIB5.
4
4 =
= lowest
lowest priority
priority
Telecom System Information Block 18 priority shall have lower than SIB 1, SIB2, SIB3, and SIB5.
Telecom The System Information Block 19 priority will be lower than SIB 1, SIB2, SIB3, and SIB5.
Telecom The priority of the System Information Block 2, which is used by the scheduling
Telecom algorithm in of
The priority thethe
RNC to give
System precedence
Information to the
Block SIB. is used by the scheduling
3, which
Telecom algorithm
The in of
priority thethe
RNC to give
System precedence
Information to the
Block SIB. is used by the scheduling
5, which
1 = highest priority
algorithm
4 inpriority
the RNC to give precedence to the SIB.
Telecom 1== lowest
This timer is
highest used to define the time interval after which UE will resend CELL
priority
Telecom 4 =
Thislowest priority
timer ispriority
1 = highest used to define the time interval after which UE will resend UE CA
Telecom 4 = lowest
The priority
periodic cell update/URA update timer (MS timer).
Telecom The timer for transition to idle mode, when the timer T305 has expired, and the MS dete
Telecom This timer is used to define the time interval after which UE will resend R
Telecom The timer for supervising successful connection establishment in case of an inter-RAT c
Telecom The RRC connection re-establishment timer used for service-types allowing notably
Telecom shorter re-establishment
This timer is started whentimes than
the UE the UE-timer
detects an "out T315. Currently
of service area" this timer is used
in URA_PCH or CELL
for CS service bearers only.
Telecom This timer is started when the T316 expires and the UE detects an "out of service area
Telecom UEs
This prior 3GPPdefines
parameter REL6 use
the this timer
ending alsooffor
point thesupervising the RRCDL
receiving window. connection re- are e
data frames
establishment of standalone (NAS) signaling connection towards both the CN
Telecom This parameter defines the ending point of the receiving window. DL data frames are e
domains.
This parameter is part of System Information Block 1.
Telecom This parameter defines the ending point of the receiving window. DL data frames are
Telecom This parameter defines the starting point for the receiving window supported by BTS. D
Telecom This parameter defines the starting point for the receiving window supported by BTS.
Telecom DL
Thisdata frames defines
parameter are expected to be received
the starting afterreceiving
point for the this window startsupported
window point. Thisby BTS. D
parameter is for Real Time dedicated channel configured to 10 ms transmission time
interval.
Telecom This parameter defines the starting point for the receiving window supported by BTS.
Telecom The parameter defines the target horizontal accuracy for Subscriber Trace related
Telecom location requests.
The parameter defines the priority of Subscriber Trace triggered location requests.
The
The accuracy
RNC is defined
creates as k-value
thesethe
requests according
internally, buttothey
3GPP TS
are 25.415. Itthrough
processed can be the same
Telecom The parameter
converted to defines
meters with target "meters
formula vertical accuracy
= for Subscriber
10x(1.1^k-1)". Trace related
queue
locationasrequests.
core network originated requests.
Telecom This parameter defines how soon the RNC generates a Subscriber Trace location request a
The accuracy is defined as k-value according to 3GPP TS 25.415. It can be
Telecom If the average
converted CPU load
to meters with (over 1 minute
formula "metersperiod) in a unit rises over this limit, new me
= 45x(1.025^k-1)".
Telecom The operator can set the interval for UE Periodical Measurement Reports.
Telecom The timer is set after a DCH for a signalling link is allocated in the RRC connection
Telecom setup phase anddetermines
This parameter a U-plane time
RB has beenafter
interval setup in the
which MS. staying in BL-INIT state ar
WCELs
The timer stops when any DL/UL activity is detected (i.e. capacity request received
Radio Resource from the MS or MAC
This parameter entity
defines the of theperiod
time RNC) when
and athe
DCH for the U-plane
shutdown RB(s)
criteria for lowistraffic
allocated.
have to
Utilisation If the MS is in CELL_FACH state, a state transition to CELL_DCH is initiated.
The timer is also used in the following signalling cases:

- when the MS is in CELL_DCH state and a RAB assignment request is received
from the PS CN,
- after the MS has detected a radio link failure in CELL_DCH state, has been
transferred to CELL_FACH state and sent a cell update to the RNC, and
- when the MS is in CELL_FACH state and a RAB assignment request is received
Radio Resource This parameter defines the time that at least one active cell in one Power Saving Mode (
Utilisation
Performance The parameter defines the confidence interval to interpret statistically where downlink
Management
Performance BLER is maintained
A parameter in BLER
that defines target in one
the confidence measured
interval connection.
to interpret statistically where an
Management
For example: value 7 gives 75% confidence interval (10 gives 85%, 13 gives 90%, 16
Identification gives 95%, 20 gives
This parameter 97.5%,
defines 23address
the IP gives 99%, 30primary
of the gives 99.9% and 50 almost 100%).
O&M Server.
Identification This parameter specifies the RNC FQDN that is needed to establish certain TCP/IP co
Identification This parameter specifies the RNC IP address that is needed to establish TCP/IP con
Identification The parameter
This parameter defines the Source
can be used IP addressofthat
for identification theisRNC.
usedThe
for SABP application
maximum toward
length of the one CBC. The
Examples:
Transmission IPv4, 255.255.255.255, 1.1.1.1
Transmission This parameter defines which Iu-PS GTP user plane data DSCP code is mapped to counter M1022Cx
This parameter is used to update cell level counter to track number of incoming DL packets with DSCP
This parameter is used to update cell level counter to track number of incoming DL TCP ACK packets
O&M This parameter uniquely identifies the physical PRNC that is currently serving the
O&M RNC.
This parameter is used to enable or disable the alarm setting for WCEL objects that stay in BL-INIT sta
O&M The parameter defines whether or not it is allowed to automatically lock the objects to
Notes: activation (alarms get set after certain time for BL-INIT WCELs) and deactivation (alarms are no
O&M This parameter specifies the threshold for connection establishment retries before th
O&M This parameter is used to initiate a full RNW database consistency check procedure
O&M in RNC
This when RNW
parameter planthe
reports download
maximum is performed. The full RNW
value as presented database
in Carrier consistency
connectivity
check
licence. can be activated during the RNW plan download separately or together with
O&M This
otherparameter
parameterreports
changes.theThis
maximum valueisas
parameter presented
supported in PS
only Throughput
in RNW capacity
plan interface,
licence.
and
O&M This itparameter
is RNW plan specific
defines the affecting only handling
last successfully of address
used IP the specific plan
of the O&Mwhere the
Server.
parameter was included. In RNW plan download where the parameter is not included
O&M This parameter defines
the consistency the aggregation
is checked level used
only for the modified in of
part updating
the RNW RCPM user
configuration.
O&M throughput distribution counters.
O&M Parameter
The defines the can
BTSbe O&Mper client connection mode which RNC uses when connecting to OMS.
This aggregation level
parameter indicates the RNW session or per data
configuration volume
management - related optional features which are on O
Off = Only insecure
If aggregation connection establishment is allowed
O&M This parameter islevel
usedisfor
'Session', the counter
interrogation is updated
purposes by value
only. It cannot be1used
whenforthe data the optional fea
changing
Probing = Both secure
transfer session and insecure
throughput matchesconnection
the counterestablishments
range. are allowed
O&M This
Forced
This parameter
parameter
If the specifies
=aggregation
Only secure
is a trigger
level the
connection
isforsecondary OMStheIP
the establishment
OMS switchover
'DataVolume', address
is allowed in RNC.
procedure
counter The
in RNC.
is updated parameter
by the amount of can b
O&M transferred
This parameter downlink or uplink
identifies the useddata OMS.
in 1000 bytes during the session.
Parameter
Note that a defines the RNC
successful parameterTLS Mode
change parameter
does notvalue for the BTS
yet guarantee O&M client,
successful OMS which is used which
switchover, in startd
O&M This parameter specifies if the automatic OMS switchover is in use or if RNC is forced
The aggregation level 'Session' is used always when the feature RAN2555 is not
O&M The
active.value of the parameter is not stored as such in RNC. It is just used for triggering the OMS switcho
PS RT services not available (0), PS convePS streaming service available PS streaming service available
0...999, step 1, Not defined (65535) Not defined (65535) Not defined (65535)
0...999, step 1, Not defined (65535) Not defined (65535) Not defined (65535)
0 (Not defined), 2 (2 digits), 3 (3 digits) 0 (Not defined) 0 (Not defined)
IMSI attach/detach not allowed (0), IMSI aIMSI attach/detach allowed (1) IMSI attach/detach allowed (1)
0...255 s, step 1 s 60 s 60 s
0...120 s, step 1 s 0 ms 0 ms
Disabled (0), Enabled (1) Disabled (0) Disabled (0)
10...100 sec, step 1 sec 20 sec 20 sec
1...3, step 1 1 1
1...3, step 1 1 1
1...3, step 1 1 1
0...4294967294 RABs, step 1 RABs, Not Applicable Not Applicable
Capacity
0...7, stepbased
1 on RNC's HW 7 7
configuration (4294967295)
0...7, step 1 2 2
1...8, step 1 2 2
0...5200 ms, step 100 ms 1100 ms 1100 ms
0...5200 ms, step 100 ms 2000 ms 2000 ms
5...30 s, step 1 s 10 s 10 s
20...1800 s, step 10 s 60 s 60 s
1...4, step 1 2 2
1...4, step 1 4 4
1...4, step 1 4 4
1...4, step 1 4 4
1...4, step 1 4 4
1...4, step 1 2 2
1...4, step 1 3 3
1...4, step 1 3 3
1000 ms (5), 1200 ms (6), 1400 ms (7), 1 2000 ms (10) 2000 ms (10)
100 ms (0), 200 ms (1), 400 ms (2), 1000 2000 ms 2000 ms
infinity, no update (0), 5 min (1), 10 min ( 30 min 30 min
5 s (0), 10 s (1), 15 s (2), 20 s (3), 30 s (4) 30 s 30 s
40 ms (0), 80 ms (1), 160 ms (2), 320 ms 160 ms 160 ms
1...8 s, step 1 s 8 seconds 8 seconds
0s (0), 2s (1), 4s (2), 6s (3), 8s (4), 12s (5 4s (2) 4s (2)
0 s (0), 10 s (1), 20 s (2), 30 s (3), 40 s (4) 30 seconds 30 seconds
0 s (0), 10 s (1), 30 s (2), 60 s (3), 180 s 180 s 180 s
0...10 ms, step 1 ms 10 ms 10 ms
0...10 ms, step 1 ms 10 ms 10 ms
0...10 ms, step 1 ms 10 ms 10 ms
0...10 ms, step 1 ms 10 ms 10 ms
0...10 ms, step 1 ms 10 ms 10 ms
0...10 ms, step 1 ms 10 ms 10 ms
0...10 ms, step 1 ms 5 ms 5 ms
0...199 ms, step 1 ms 25 ms 25 ms
0...199 ms, step 1 ms 25 ms 25 ms
0...199 ms, step 1 ms 25 ms 25 ms
0...199 ms, step 1 ms 25 ms 25 ms
0...199 ms, step 1 ms 25 ms 25 ms
0...199 ms, step 1 ms 25 ms 25 ms
0...199 ms, step 1 ms 15 ms 15 ms
0...127, step 1 30 30
high (0), normal (1) normal (1) normal (1)
0...127, step 1 70 70
5...60 s, step 5 s, disabled (255) 10 s 10 s
50...90 %, step 5 % 70 % 70 %
2000 ms (0), 4000 ms (1), 6000 ms (2), 8 16000 ms (5) 16000 ms (5)
0...20 s, step 0.5 s 5s 5s
5...30 min, step 1 min 10 min 10 min
1...30 Minutes, step 1 Minutes 5 Minutes 5 Minutes

10...300 seconds, step 10 seconds 20 seconds 20 seconds
75% (7), 85% (10), 90% (13), 95% (16), 9 99% (23) 99% (23)
75% (7), 85% (10), 90% (13), 95% (16), 9 99% (23) 99% (23)
7...15 characters Not applicable Not applicable

7...15 characters 0.0.0.0 0.0.0.0

0...63, step 1, The value 255 means that 255 255
1...65534, step 1, 0 means PRNC is not Not Applicable Not Applicable

providing active
Disabled (0), RNC Service
Enabled (1) (0) Disabled (0) Disabled (0)
Not allowed (0), Allowed (1) Allowed (1) Allowed (1)
1...30, step 1 15 15
Not allowed (0), Allowed (1) Not allowed (0) Not allowed (0)
0...65534 unlocked WCELs, step 1 Not Applicable Not Applicable
unlocked WCELs,
0...4294967294 Capacity
GTP Bytes, based
step 1 on
GTP Not Applicable Not Applicable
RNC's HW configuration (65535)
Bytes, Capacity based on RNC's HW
configuration (4294967295)
Aggregation per session (0), Aggregation Aggregation per session (0) Aggregation per session (0)
per data volume (1) Not applicable Not applicable
Not defined (0), Network originated confi
Off (0), Forced (1), Probing (2) Probing (2) Probing (2)
Inter System Handover (0), Location Serv Not applicable Not applicable
primary (1), secondary (2), backup (3) primary (1) primary (1)
automatic (0), primary forced (1), seconda automatic (0) automatic (0)
do not make switchover (0), switch to pr no switchover (0) no switchover (0)
RNC2600
0 read-only
Not defined (65535)

Not defined (65535)
0 (Not defined)
IMSI attach/detach allowed (1)
60 s
0 ms
Disabled (0)
Disabled (0)
20 sec
1
1
1
Planning
7
2
2
1000 ms
1100 ms
10 s
4 kbps
8 kbps
16 kbps
32 kbps
64 kbps
128 kbps
256 kbps
512 kbps
1000 kbps
2000 kbps
4000 kbps
8000 kbps
250 kbps
500 kbps
1000 kbps
1500 kbps
60 s
Not applicable
2
4
4
4
3
2
3
3
1000 ms
2000 ms
30 min
30 s
160 ms
8 seconds
4s (2)
30 seconds
1800 s
10 ms
10 ms
10 ms
10 ms
10 ms
10 ms
5 ms
25 ms
25 ms
25 ms
25 ms
25 ms
25 ms
15 ms
30
normal (1)
70
10 s
70 %
16000 ms (5)
5s
10 min
5 Minutes
20 seconds
99% (23)
99% (23)
Not applicable
Not applicable
Not applicable
Not applicable
0.0.0.0
255
255
255
255
PRNC is not providing active RNC

Service (0)
Disabled (0)
Not applicable
10
Not allowed (0)
Planning
Planning
Not applicable
Aggregation per session (0)
Not applicable
Off (0)
Not applicable
Not applicable
primary (1)
automatic (0)
no switchover (0)
Comments
Please Refer to Trial Report UKRE/12/066 for more details

Change made as per issued change Request
associated with location based services
TO2 UK default value chnages after trial and FOA and has been rolled out on the entire network
set to infinity as recommended in 3GPP

Parameter changed during audit in Dec. 2010. Value should be equal to 5s across all RNCs in the
network
RAN955 Power Saving Mode for BTS

AP3 Owner?
AP3 Owner?
AP3 Owner?

38141
OUTPUT 10875 Extended Discrepancy

10202 Discrepancy



10637
10705


Daily
Weekly
Weekly
Weekly
Daily
Daily
Weekly
Monthly
Monthly
Daily
Daily
No Auto Disc Check Required New in RU20
Weekly
New in RU20 on TOP
Weekly
Daily
Weekly
Weekly
Weekly
Weekly
Weekly
Weekly
Daily
Daily
Weekly
Daily
Daily
Daily
Daily
Daily
Daily
Daily
Daily
Daily
Daily
Daily
Daily
Daily
Daily
Daily
Daily

Monthly
Monthly
Monthly
Monthly
Monthly

New in RU40
New In RU50 EP1

New in RU40
New in RU40
New in RU40
New In RU50 EP1
New In RU50 EP1

New In RU50 EP1
New In RU50 EP1
New In RU50 EP1
New In RU50 EP1
New In RU50 EP1
New In RU50 EP1
New In RU50 EP1
New In RU50 EP1
New In RU50 EP1
New In RU50 EP1
New In RU50 EP1
New In RU50 EP1
New In RU50 EP1
New In RU50 EP1
New In RU50 EP1
New in RU40
New in RU40
New in RU40
New in RU40
New in RU40
New in RU40
New in RU40
New in RU40
New In RU50 EP1

New in RU40
New in RU30
New In RU50 EP1
New In RU50 EP1
New In RU50 EP1
New in RU30
New In RU50 EP1
New in RU40
New in RU30
New in RU30
New in RU30
New in RU30
9.0
4.5
4.5
4.5
8.0
9.0
4.5
9.0
8.0
8.0
8.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
5.7
9.0
8.0
Issue 5.5
8.0
4.5
4.5
9.0
9.0
8.0
8.0
8.0
8.0
9.0
8.0
9.0
9.0
9.0
9.0
9.0
9.0
8.0
9.0
9.0
9.0
RNFC Parameters
Abbreviated Name

AMRCodecSet74Enabled
AMRCodecSetEnabled
AMRWithEDCH
AutoACResEnabled
CSFBEnabled
DCHtoPCHEnabled
FastPCHSwitchEnabled
FlexULRLCEnabled
FRLCEnabled
LBAMRMuteCallPrevention
RRCSetupCCHEnabledR99
SLHOCmAllowedNRT
SRVCCEnabled
WBAMRCodecSetEnabled
WireLessPriorityService
WPSCallRestriction
AutoACResBTSEnabled
BTSLoadIndSel
Packet Scheduler Parameters
AMRWithHSDSCH
CMmasterSwitch
ConfigurableRCPMtputEnabled
CSCallSetUpFACHPCHImpr
DataSessionProfEnabled
DCHBitRateBalancing
DCHScheOverIur
DLOptimisationUsage
DynUsageHSDPAReturnChannel
FlexUpgrUsage
HLSModeSelection
HSDPA16KBPSReturnChannel
HSDPADynamicResourceAllocation
HSUPADynBLEREnabled
InBearerAppPrioEnabled
LFDProfEnabled
PBSpolicy
PSOpThroUsage
RABDRAEnabled
RABFailDueUESTCorr
FasterOLPCEnabled
PowerBalancing
Telecom Parameters
CCCHforCUCallowed
CUCforPCHtoDCHallowed
CVUserInactInSignConnRel
EmergencyCallRedirect
EUTRAdetection
FastDormancyEnabled
IuPSrelWait3G2GMultiServ
MIBPLMNIdIncluded
MOCNenabled
PPACEnabled
RIMUtraSIEnab
RNFCId
SignConnActivitySupervision
SubscriberTrace
DCH00SuppOnIurEnabled
EmergencyCallISHOSupport
FemtoHandoverControl
HSDPAMobility
HSPAInterRNCMobility
HSPAOverIurExt
IFHOOverIurEnabled
IFHOOverIurExt
IMSIMeasMDTEnabled
IntelligentEmergencyCallISHOSupport
ISHOCancellation
ISHOInIurMobility
MRABRelocVendSpCorr
RRCReDirEnabled
UEEvent6f6gOffEnabled
HSDPA48UsersEnabled
PostVerifPeriodDLSynch
PWSMDriftAllowed
SIBCapabilityCheck
O&M Parameters
AutomDLPlanUpdEnabled
RNFCChangeOrigin
CapaSmartphoneEnabled
rs
Full Name
Managed Object
AMR codec mode set 7.4 enabled RNFC

AMR codec mode set enabled RNFC
Usage of AMR service with E-DCH RNFC
Automatic Access Class Restriction Enabled RNFC
CSFB Enabled RNFC
Enabling direct Cell_DCH to PCH state transition RNFC
Enabling Fast Cell_PCH Switching feature RNFC
Flexible UL RLC Enabled RNFC
Flexible RLC Enabled RNFC
Load Based AMR Codec Selection Causing Mute Call RNFC
RRC setup on CCH enabled for R99 UE RNFC
CM allowed for NRT connection in SLHO RNFC
SRVCC Enabled RNFC
WB AMR codec mode set enabled RNFC
Usage of the Wireless Priority Service RNFC
Restricting overloaded WPS calls RNFC
Automatic Access Class Restriction based on BTS load Enabled RNFC

BTS load indication selection RNFC
Usage of AMR service with HS-DSCH RNFC

Compressed mode master switch RNFC
Configure Ranges for RCPM User Throughput Counters enabled RNFC
CS Call Setup Attempts from Cell_FACH/Cell_PCH Impr RNFC
Data Session Profiling Enabled RNFC
DCH bit rate balancing on/off switch RNFC
DCH Scheduling Over Iur RNFC
Dynamic link optimisation usage RNFC
Dynamic usage of UL NRT DCH HSDPA return Channel RNFC
Usage of the Flexible Upgrade of the NRT DCH data rate RNFC
Higher Layer Scheduling mode selection RNFC
HSDPA 16 kbps UL DCH return channel on/off switch RNFC
HSDPA Dynamic Resource Allocation RNFC
HSUPA Dynamic BLER Enabled RNFC
In Bearer Application Priority Enabled RNFC
LFD profiling Enabled RNFC
Priority based scheduling policy RNFC
Throughput based optimisation of the PS algorithm usage RNFC
Usage of the direct resource allocation for PS NRT HSPA RNFC
RAB Act Fail and Access Fail due to UE after ST Corr RNFC
Faster OLPC Enabled RNFC

Power Balancing on/off RNFC
Usage of CCCH for Cell/URA Update Confirm allowed RNFC

Direct State Transition From Cell_PCH to Cell_DCH RNFC
Cause value usage in NAS signalling connection release RNFC
Emergency Call Redirect RNFC
E-UTRA detection RNFC
Fast Dormancy activation / de-activation parameter RNFC
Time supervision for releasing Iu-PS connection RNFC
MIB PLMN Identity Included RNFC
Multi-Operator Core Network enabled RNFC
Paging Permission With Access Control Enabled RNFC
RIM UTRA System Information Application Enabled RNFC
RNFC Identifier RNFC
Activity supervision for NAS signaling connection RNFC
Subscriber Trace RNFC
DCH 0/0 Support On Iur Enabled RNFC

Emergency Call ISHO Support RNFC
Femto Handover Control RNFC
Serving HS-DSCH cell change and SHO on/off switch RNFC
HSPA Inter-RNC Mobility RNFC
HSPA Over Iur Extension RNFC
IFHO Over Iur Enabled RNFC
IFHO Over Iur Extension RNFC
IMSI based MDT Measurements RNFC
Intelligent Emergency Call ISHO Support RNFC
Inter-System Handover Cancellation RNFC
ISHO In Iur Mobility RNFC
Multi-RAB Handling with Ericsson in SRNS Relocation RNFC
Enabling RRC connection Redirection RNFC
UEs Handling Measurement Events e6f/e6g Incorrectly RNFC
HSDPA 48 users enabled RNFC

Post-verification period in downlink synchronization RNFC
Cell shutdown allowed with drifting UE RNFC
SIB Capability Check RNFC

Automatic DL Plan update enabled RNFC
Change origin RNFC
Capacity Increase for Smartphones Enabled RNFC

Group
AC
AC
AC
AC, LC
AC, HC
AC
AC
AC
AC
AC
AC
AC
AC, HC
AC
AC
AC
LC
LC
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PC
PC
Telecom
Telecom
Telecom
Telecom
Telecom
Telecom
Telecom
Telecom
Telecom
Telecom
Telecom
Telecom
Telecom
Telecom
HC
HC
HC
HC
HC
HC
HC
HC
HC
HC
HC
HC
HC
HC
HC

SI
O&M
O&M
Performance Management
Description
This parameter is used to manage the usage of RAN2578 AMR Codec Set for 2G-3G TrFO feature. The feature provides s
This parameter is used to manage the usage of RAN830 AMR codec mode sets (12.2, 7.95, 5.9, 4.75) and (5.9, 4.75) feat
The RAN2578 feature license, this management parameter and WCEL-CSAMRModeSET and VCEL-CSAMRModeSET pa
If the parameter is enabled (1), AMR service can be used simultaneously with HSUPA
The
(E-DCH) RAN830 in thefeature
uplink. license, this management
If the parameter is of
disabled parameter AMRand
(0), Access WCEL-CSAMRModeSET
service and VCEL-CSAMRModeSET par
This parameter enables/disables the use Automatic Classover DCH cannot
restriction in the RNC for different overload triggers. A
be used simultaneously
Automatic Access Classwith HSUPA uses
Restriction (E-DCH) in thenotation
a binary uplink, but of 4DCHs are used for all
bits where:
The
services.parameterIf CS indicates
voice over whether
HSPA CS Fallback
feature is not (RAN2435)
activated, functionality
then AMR is enabled
service can be in the power
RNC or not.
-CSFB
bit 0 indicates
functionality whether
is or not the
activated in feature
the cell is activated
only if both for the TotalCSFBEnabled
parameters Received wideband
(for RNC) and IncomingLTEISHO (for cell)
just
- bit mapped
This 1parameter
indicates to DCH
defines
whether (otherwise
whether
or not the itdirect
can
featurebe mapped
transition
is activatedfromalsoCell_DCH
to HSPA).
for to Cell_PCH
NRT scheduling is allowed
queue length
- bit 2parameter
This indicates enables/disables
whether or not thethe feature
RAN2494 is activated
(Fast Cell_PCH for the CNSwitching)overload feature. Fas
- bit 3 indicates whether or not the feature is activated for the RNC overload
After
This
If a bit the modification
parameter
is set to 1, of the parameter,
enables/disables
the feature use of the
is activated fornew
feature value
the Flexible
correspondingis ULused RLC. for new
If theconnections.
overload parameter
trigger. If a is bit
enis set to 0, the feature is not activat
Active
This triggers can
parameter restricted the number
enables/disables the use of UE featureAccess Classes
Flexible RLCusing and use SIB of messages
MAC- in case overload is detected due to th
Automatic
ehs in servingAccessRNC. Class restriction feature is enabled, if at least one bit (bit0, bit1, bit2, bit3) is set to 1.
This parameter disables/enables the use of Load Based AMR Codec Selection Causing M
Note:
If Parametersis of
the parameter mass event
enabled (1), then handlerfeature must be configured
Flexible RLC is used if NRT queue
in the RNC. length
If the functionality is activated (bit1 is set to 1)
This parameter
parameter defines(0),
is disabled whether
then feature RRC connectionFlexible RLC setup is notfor used
R99 UEs in theisRNC.allowed to be
performed
This parameter on common
defines channels
whether or (CCH).
not a If the value ofmode
compressed this parameter
is allowed isfordisabled,
the pure NRT
RRC
Noticeconnection
that CS voice setup overis performed
HSPA needs on Flexible
dedicated RLC channelto be (DCH)activated. despite of the value
The
of the parameter
Establishment indicates Cause whether
information SingleelementRadio Voice in theCall RRC Continuity
message(RAN2435) RRC functionality is enabled in the RNC or not
SRVCC
Connection
This functionality
parameter Request.
is used is activated
If to
value
manage in
of thisthe the cell
parameter only
usage ofisRAN831 if both parameters
enabledWideband and the value SRVCCEnabled
AMRofCodec the Set(for RNC)and
(12.65, 8.85, IncomingLTEISHO (for c
6.6). The feature provide
Establishment Cause information element is interpreted so (parameter
This parameter enables/disables
SRBMapRRCSetupEC), RRCthis the use of
connection Wireless
setup can be Priority
performedService on(WPS)
common feature.
The RAN831 feature license, management parameter and WCEL-CSAMRModeSETWB and VCEL-CSAMRModeSET
channels.
This parameter is used only when the Wireless Priority SErvice feature is enabled.
If
The
Whentheparameter
value is enabled,
the Wireless thenService
SRBMapRRCSetupEC
Priority AMR call identified
featuredefines as a Wireless
preferred
is enabled, channel
Wireless Priority
typeService
Priority inService
the RRC call is
calls
prioritized
connection
are in
admittedsetup, Admission
even either Control
common or
if the estimated or directed to GSM
dedicated channel.
non-controlable load exceeds the target power. in
in case of UTRAN congestion,
order to improveenables/disables
This parameter the setup of Wireless the use Priority
of RAN3018Service BTS calls.load based AACR feature.
The
This
This RAN3018
parameterBTS loadtobased
enables/disables AACR feature
restriction prevents
of the
overloaded theWireless
users (with access
Priority classes
Service Theset to be restricticted by RNC) fromo
If theparameter
calls. value is disabled,is used thenselect
Wireless the way how
Priority Service BTSidentification
load is detected is not in used
the RNC.
and all BTS load can be detected based
AMR
If a BTS calls are not
does equally treated in callofsetup phase.cause code to indicate the BTS load, the BTS load based AACR is not us
The selected way support
is used by sending
the BTS the private
overload protection functionality. The BTS overload protection limits the amount of R
If
If the
the value
parameter is enabled,
is enabled then(value
the allowed 1), AMR exceeding
service can of target
be used power is limited. The
simultaneously with
Note:
received
The use Other triggers
non-controlable
of the private of Automatic
causepower code can Accessexceed Class its restriction
target by theare activated/deactivated
value of the parameter with the RNFC-AutoACResEnabled pa
This
Offsetparameter
for received defines
Wireless whether Priority or enables
not also the mode
compressed
Service
use ofisRAN3018
power. The transmitted
BTSsystem
used onnon-controlable
the load basedlevel.AACR feature.
power
The
If a BTS can
parameter
doesexceed
not its target
indicates
support the bysending
whether thethe value of of
RAN2555thethe parameter
private causeOffset
Configurable code, for
Rangesthen transmitted
for
theUser3GPP Throughput
cause code Counters
is used feature is enabled
regardless in t
of the valu
Wireless
If the value Priority
for thisService
parameter power. is Thus,
0, then the
the number
user of Wireless
cannot configure Priority
class Service
ranges calls
for is throughput counters.
User
This parameter activates the Improvements to CS Call Setup Attempts Starting from the Cell_FACH/Cell_PCH (RAN2970)
limited
To enable in anthe overloaded
configuration situation.
of class throughput, this parameter is state
set toor 1.the CS call setup starting from Cell_FACH. They
The
This feature
parameter has optionswhether
defines for CS call
Data setupSessionstarting from
profiling Cell_PCH
feature is enabled or disabled
Improvements to CS Call Setup Attempts Starting from the Cell_FACH/Cell_PCH uses a binary notation of 45 bits where:
If the
Parameter value is disabled,
defines whether then there
DCH is not a limition for exceeding of target power. In is
- bit 0 indicates whether or not thebitfeature
rates of is the user are
activated for balanced.
the Improvements If the balancing
for CS conversational Call Starting from Cell_
this case, the number of Wireless Priority Service calls is not limited.
-This
bit 1parameter
indicates indicates
whether or not the
if DCH feature isover
scheduling activatedIur is for the Improvements
supported by SRNC orfornot CS Call Starting from Cell_FACH state for
- bit 2 indicates whether or not the feature is activated for the Improvements for CS Call Starting from Cell_FACH state for
The
- bit 3parameter
indicates is used tooractivate
whether not the or deactivate
feature the dynamic
is activated for thelink optimisationfor CS Call Starting from Cell_PCH state
Improvements
functionality.
This parameter is used to switch "On" and "Off" the Flexible Upgrade of of
Values 1 and 2 of this parameter also indicate the number NRT steps
Data by
which
Rate a spreading
and Throughput factor Basedis increased
Optimisationofofthedue to dynamic
theFlexible link
PS Algorithm optimisation.
feature used
This parameter switches the functionality Upgrade of the NRTforDCH UL Dat
NRT DCH HSDPA return channel.
Only the cells under
This parameter controls,the SRNCon the can system trigger level,dynamic
whether linkcompressed
optimisation. mode by HLS (singl
Whenparameter
This the parameter defines is set "On",the
whether useusageof theof above
the 16 mentioned
kbps UL DCH features returnto UL NRT is
channel
DCH
allowed HSDPA for return channel
HSDPA. The value is of
allowed.
the parameter is read in conjunction with the
This parameter enables/disables the use of the HSDPA Dynamic Resource Allocation
allocation,
feature in theupgrade
RNC. or
HSDPAdowngrade mustuse of the UL DCH
be return channel. TheHSDPAHSDPA 16
When
This
kbps the
parameter
UL parameter
DCH is set "Off",
Enables/Disables
return channel is theenabled
applicable of theonly
Dynamic inadjustment
above the
if HSDPA
cell to
mentioned is
apply
of HSUPA
enabled
the
features in to
BLER.
the UL dynamic
NRT
cell.
resource
DCH HSDPA allocation
return feature.
channelHSDPA is forbidden. must not be enabled in any unlocked cell under
This
RNC parameter
before defines whether
modification of the the RAN2510 In-bearer application optimization feat
parameter.
Dynamic HSUPA BLER estimation algorithm defines BLER target for peak data rate, bursty data rate and continuous data
LFD (Legacy Fast Dormancy) profiling Enabled parameter Enables/Disables the use of
Dynamic resource allocation is comprised of the dynamic power allocation and
This
dynamicparameter defines afunctionalities.
code allocation priority-based Ifscheduling dynamic resource policy. allocation is disabled,
static resource allocation is used instead.
The following alternatives can be used:
To utilise dynamic code allocation, the HSDPA 15 codes feature ('HSDPA cell upg
1.
fromPriority-based
5 to 10 codes' scheduling
or 'HSDPA is not
cell active
upg from 10 to 15 codes' license) must be
Priority-based
enabled. scheduling functionality is not active.
2. Higher priority
The RAB of the incoming capacity request must have a higher priority than the RAB
This parameter activates Throughput based optimisation of the PS algorithm feature.
Activation
The parameter and deactivation
enables/disables can be thedone use separately
of the directforresource the interactive
allocation traffic
for class
HSPA. It
within
also all
definestraffic handling
whether the priorities
direct and
resource background
allocation traffic
for HSPAclass is traffics.
applied in Cell_FACH
This parameter enables/disables the use of RAB Activation failure and Access Failure
state, Cell_DCH state of both. If the feature is enabled, HS-DSCH/E-DCH or HS-
'Throughput
DSCH/UL-DCH based optimisation
allocation is triedusage'for PSuses dataaofbinary notation
interactive andofbackground
4 bits wheretraffic
-classes bit 0 indicates
during the whether
NRT RABtheor not the feature
setup phase as follows: is activated for the interactive traffic class
This
trafficparameter determines
handling priority 1 traffics Activation/Deactivation of Faster Outer Loop Power Control functionality in use.
-This bit 1parameter
indicates defines
whetherwhether or not the Powerfeature is activated
Balancing is usedfor the interactive traffic class
or not.
If
trafficthe parameter
handling priorityis set to enabled, following parameters are used to determine the value of Discontinuous transmission per
2 traffics
- bitULFastOLPCDTXthld
2 indicates whether or notallocation
the feature
0 (Disabled):
traffic Direct
FOLPCStepSizSIRTgt resource for is activated
HSPA is notfor the interactive
applied but DCH traffic 0/0 kbps classis
RNC
allocated handling
uses this priority
parameter 3 traffics
to decide whether it is
and traffic volume measurements started in connection with PS NRT RAB allowed to use the CCCH logical
channel
-setupFOLPCSIRTgtModInt
bit 3 indicates
for sendingwhether or not the
a Cell/URA updatefeature is activated tofor
thethe backgrounddefault traffic class
The
which parameter defines iftoit adjust
is allowed to confirmation
move theofUE thedirectly
MS.fromBy Cell_PCH all basic
to
trafficsmakes
mobility the
procedures OLPC (cell/URA the SIR
reselections target
and periodic call faster.
cell/URA updates) in
Cell_DCH
Otherwise, using
legacy the RRC:CELL
handling i.e. UPDATE
internal CONFIRM message.
This
common parameter
1 (Enabled channel allows
states
in Cell_FACH):
the are usage
handled
Direct
of the viaconstant
resource
RANAP
CCCH values
cause
without
allocation
are followed
value
foranyHSPA reservation to determine
'User Inactivity'
is appliedofinDSP
in thethese values.
RANAP:
If a bit
resources. is Iu
setrelease
to 1, therequest
feature procedure
is activated whenfor the RNC is
corresponding releasing an
traffics. inactive
If a bit is set
This parameter
Cell_FACH
Case-specific state enables/disables
but not
decision forindirect
Cell_DCH the redirect
Cell/URA_PCHstate. feature for emergency
to Cell_DCH calls to GSM
state transition on
is made
signalling
to 0, the connection
feature is not towards
activated thefor PS-CN.
the corresponding traffics.
connection
by using
This parameter thecreation. When
CUCEcNoThreshold
definesiswhether this parameter
(CPICH
thevalue is
Ec/No enabled,
UE in idleallowed' Thresholdall
mode may detect emergency
Value For calls
CUC
the presence areUsage)
of an E-UT
Note!
directed If the
2 (Enabled
parameter. parameter
to the
in GSM network.
Cell_DCH): set to the
Direct resource'Not allocation forand HSPA there are
is applied no free HW
in Cell_DCH
If this
resources
Operator cause
Interactive value
Traffic
available
caninactivate/is used,
Class
for the (TC)the
DCCH
de-activate SGSN
Traffic is
allocation, allowed
Handling the to ignore
priority
RRC/Iu (THP)the 1Iu
connectionsisrelease
indicated
of request
the as
MS (i.e.
active,
must
state but not Cell_FACH state. Fast Dormancy functionality with the parameter. Par
the SGSN may
throughput
be released. decide whether
measurements (release,to keep lower thebitIu rate,
connection
and upper or release
bit rate)it for immediately
the
The
when parameter
allocatedthe NRTrequest controls
DCH is receivedthe
are allowed release
from forthe of
that the
RNC). Iu-PS
traffic connection
type. after the 3G/2G inter-
3 (Enabled
system in Cell_FACH
handover with CS+PS and Cell_DCH):
multi-service. Direct resource allocation for HSPA is
The parameter defines if the
applied in Cell_FACH state and in Cell_DCH state.broadcasted PLMN identity in Master Information Block (M
If the SGSN ignores the Iu release request, the RNC restarts the
This
When parameter
the UE does defines
SignConnActivitySupervision. the usage
not immediately The of UE Multi-Operator
after switchingtotoCore
is switched thePCH
the Networkstate(MOCN)
2G-service if initiate
there are feature.
a routing
no
area
The update
otherparameter
activities procedure
(e.g.
defines towards or
RT-service
whether thesignalling)
or PS-CN,
not the PPAC the
goingRNC oncan
feature at iskeep
this the Iu-PS
moment.
enabled in the connection
RNC. When enabled in the RNC, this feature intr
and
The wait
feature for is
theout RAU andinthe
of use therelease
RNC of
ifuse
thethe CS-service
value of with in the 2G-side.
this parameter is set
This
Directparameter
resource enables/disables
allocation is applied thein theofcase
CSFB of full RIM feature.
HSPA (HS-DSCH/E-DCHThetofeature
'Disabled'.
activates the RIM UTRA System Informati
and
Before enabling the feature the paging response restriction per CN domain shall be defined with parameter RNAC - Paging
F-DPCH
When allocated)
the timer is
This parameter irrespective
expires, the RNC
the identifier of the
for sends
the RNFCvalue
the Iuof this parameter
release request to the SGSN.
object.
The data between LTE and RNC is packed in RIM PDUs. The RIM PDUs are sent between the different BSSes inside RAN
This timer defines whether it is allowed to maintain an inactive signalling connection
towards
LTE can
This the
usePS-CN
parameter UTRA andSI
theenables/disableshow data longin the theuse
CSFB RNC byof keeps
sending
Subscriber thetheconnection
RRC CONNECTION
Trace feature before the IuRELEASE
in Serving RNC .If message to the UE packed with S
release request procedure.
Whenparameter
This the UE with a standalone
defines whether signalling
the AMR with connection
DCH 0/0(i.e. no NRT-RAB(s))
Support on Iur feature towards
is enabled in the RNC. When enabled in the
the
The PS-CN
feature isisswitched
out of usetointhetheCELL/URA_PCH
RNC if either thestate,
state the RNC entity issupervises the
This parameter
inactive Iu connectionactivatesby the
using directed
the timeremergency call inter-system handover feature.orI the value of this parameter is set to
of the
SignConnActivitySupervision.
license "Off/Config",
This parameter determines whether or not the Femto Handover Control feature is enabled in the RNC. When the Femto H
Each time when there is a NAS signalling sequence executed between the UE and
The
the parameter
SGSN, enables/disables serving HS-DSCH cell
thechange and SHOback of the
If the Femtothe
associated
inactivity
Handover
DPCH.
supervision
Control feature is is
stopped.
disabled After
in the UE isall
RNC, switched
neighbour cells to the
are included in the neighbour cell lists tha
PCH parameter
This states (no enables/disables
NRT-RAB(s)), thethe SignConnActivitySupervision
use of HSPA Inter-RNC Cell is Change
started from the
feature.
If theparameter
initial
The value
value.is disabled,
also basicwhether
defines mobilityunacceptable
handling withE-DCH switching to FACH/DCH
active setspecify
initiates is
This parameters
parameter
utilised. If the ADJSAdjsSIB,
enables/disables
value is enabled, ADJIAdjiSIB
the use
SHO of the and ADJGAdjgSIB
of associated
Extension Of
DPCH HSPA andOver theHSPA
Iur feature
serving HS-DSCHintra-frequency,
in RN inter-frequency and GSM n
inter-RNC cell change or not.
cell
This change
parameter
If there is this are enables/disables
a NRT-RAB utilised.setup Inter-frequency
executed before handover
the Control
expiry over
offeature
the Iur functionality
supervision timer anythateffect to the information broadcasted in
Note that parameter or the Femto Handover does not have
SignConnActivitySupervision,
0 (Disabled):
This parameter HSPA Inter-RNC
enables the
Cellinactivity
or disables Change
the IFHO supervision
is Over
disabled procedure
(HSPA
Iur Enhancements to DCHis stopped.
switch is
functionality int
applied)
When
In(Enabled
1 this parameter
the expiry is enabled,
trigger):the
of the SignConnActivitySupervision,
without E-DCH HSPAoperator can
Inter-RNC theinitiate
RNCChange
Cell IMSI based
initiates MDT measure
isaenabled
paging but
procedure.
unacceptable
This parameter After a response
E-DCH
activatesactive to
theset the
doespaging
Intelligent not procedure
initiate
Directed HSPA is inter-RNC
Emergency receivedCall from the UE, the
cell change
Inter-system Handove
RNC
2 executes
(Enabled): HSPAthe Iu release request
Inter-RNC Cell Changeprocedure towards
is enabled andthe PS-CN and E-DCH
unacceptable the UE is
This parameter enables/disables the use of ISHO Cancellation feature in the RNC.
switched
active settoinitiates
the idleHSPA mode. inter-RNC cell change
If theparameter
This value is '0',indicates
the ISHO Cancellation
if SRNC supports is deactivated
ISHO duringinIur theMobility.
RNC.
If the value is '1', the ISHO Cancellation is activated in the RNC
If theparameter
This value '0 seconds' is used, an
enables/disables theinactive
use of signalling
Multi-RABconnection
Handling with is not allowed
other vendor andin SRNS Relocation feature. The feature
the Iu release is requested from the SGSN if/when there is no Iu release command
This parameter
received after: enables/disables the RRC Connection Setup Redirection feature.
This parameter disables/enables the use of feature UEs Handling Measurement Events e
Value
the'0'last
meansNRT-RAB that RRC Connection
is released RedirectionorisCELL_FACH
(in CELL_DCH not enabled. state).
Value
the'1'NAS
means that RRC
signalling Connection
sequence (e.g. Redirection
RAU or SMS) is enabled
is performed due to admission
between control reasons.
the SGSN
Value
and the
This 2UE
means
parameter in the that RRC
CELL_DCH
defines Connection
whether state
the and Redirection
HSDPA there noisRAB
48isusers enabled cell due
per setup to RNC
procedure
feature signaling
executed.unit overload reason.
is in use.
Value
If 3 means
theparameter
feature that RRCthe
is determines
disabled, Connection
RNC allows Redirection
just 16 HSDPA is enabled due to admission control and RNC signaling unit overload re
The whether the post-verification isusers
usedininthe thecell if parameter
downlink chip and
HSDPA64UsersEnabled value is 'Not Enabled'.
This parameter determinesparameter
If HSDPA64UsersEnabled whether the cell 'Enabled'
is set shutdowninisthe allowed withvalue
cell, the drifting UEs or not
of the
HSDPA 48 users enabled parameter is not applicable in the cell.
This
This parameter
parameter defines
have nowhether
effect, ifor
thenot SIB Capability
feature HSDPA 64 Check
Usersfeature is enabled
Per Cell in the
is activated to
the cell with the parameter HSDPA64UsersEnabled.
This parameter have no effect, if the feature HSPA 72 Users Per Cell is activated to
the cell with the parameter HSPA72UsersPerCell.
This parameter have no effect, if the feature HSPA 128 Users Per Cell is activated to
the cell with the parameter HSPA128UsersPerCell.
User amounts can also be restricted with the following parameters:
- MaxNumberHSDSCHMACdFlows
Parameter defines whether or not direct activation modifications are updated to the d
This parameter is used by the user (operator) to enable the capacity increase in the
control plane, which in turn could increase the capacity for the use of increased
smartphones in the network. By enabling this feature, full CPU performance of
CCP1D-A (new CPU card) is achieved for ICSU.

Bit 0: Received total wideband power, Bit 0 0
Disabled (0), Enabled (1) Enabled (1) Enabled (1)
Disabled (0), Functionality is enabled only Disabled (0) Disabled (0)
Disable (0), Enable (1) Disable (0) Disable (0)

3GPP cause code is used (0), Private 3GPP cause code is used (0) 3GPP cause code is used (0)
cause code is used (1)

Used (0), Not used (1) 0 0
Bit 0: CS Call Starting from FACH state 0 0
for mobile originating
Disabled (0), Enabled (1) Call, Bit 1: CS Call Disabled (0) Disabled (0)
Starting from Cell_FACH state for
Disabled (0), Enabled
location services, Bit 2:(1)
CS Call Starting Enabled (1) Enabled (1)
from FACH state
Not Supported forSupported
(0), mobile terminating
(1) Not Supported (0) Not Supported (0)
Call, Bit 3: CS Call Starting from
Feature
Cell_PCH is state,
not activated (0), Feature
Bit 4: Unused isFeature
(Always ac is activated with SF step
Feature
1 (1) is activated with SF step 1 (1)
0),
Off Bit
(0),5:On
Unused
(1) (Always 0), Bit 6: Off (0) Off (0)
Unused (Always 0), Bit 7: Unused
Off (0), On (1) Off (0) Off (0)
(Always 0)
1/2 HLS allowed (0), 3/4 HLS is used (1) 0 0
Priority based scheduling is not active
Priority
(1), H based scheduling is notPriority
active (1)
based scheduling is not active (1)
Bit 0: Interactive TC THP 1, Bit 1: Interac 0 0
Disabled (0), Enabled in Cell_FACH (1), Disabled (0) Disabled (0)
Disabled (0), Enabled for Rel-6 and older Disabled (0) Disabled (0)
UEs (1), Enabled for Rel-7 and older
UEs (2), Enabled for Rel-8 and older
Disabled (0), Enabled
UEs (3), Enabled for all(1)
UEs (15) Disabled (0) Disabled (0)
Power Balancing is not in use (0), PowerPower
B Balancing is not in use (0)
Power Balancing is not in use (0)

false (0), true (1) true (1) true (1)
No (0), Yes (1) Yes (1) Yes (1)
Disabled (0), Enabled (1) Enabled (1) Enabled (1)
10s (0), 20s (1), 30s (2), 60s (3), 120s (4) 120s (4) 120s (4)
MIB PLMN id not included (0), MIB PLMN iMIB PLMN id not included (0) MIB PLMN id not included (0)
0 s (0), 10 s (1), 20 s (2), 30 s (3), 60 s (4 4 4

Disabled (0), Enabled without E-DCH Disabled (0) Disabled (0)
trigger
Disabled(1),(0),
Enabled (2)(1)
Enabled Disabled (0) Disabled (0)
Not Supported (0), Supported (1) Not Supported (0) Not Supported (0)
Disabled (0), Enabled AC (1), Enabled Disabled (0) Disabled (0)
signaling unit Enabled
Disabled (0), overload(1)
(2), Enabled AC Disabled (0) Disabled (0)
and signaling unit overload (3)
Not in use (0), In use (1) Not in use (0) Not in use (0)
Post-verification period not used (0), Post-
Post-verification period not used
Post-verification
(0) period not used (0)
NO (0), YES (1) NO (0) NO (0)

No (0), Yes (1) No:RNWPlan not updated (0) No:RNWPlan not updated (0)
Not Defined (0), Network originated config Not applicable Not applicable
disable (0), enable (1) disable (0) disable (0)

RNC2600
Disabled (0)
Enabled (1)
Enabled (1)
0
Disabled (0)
Enabled (1)
Disabled (0)
Disabled (0)
Enabled (1)
Disable (0)
Disabled (0)
Allowed (1)
Enabled (1)
Enabled (1)
Disabled (0)
Disabled (0)
Disabled (0)
3GPP cause code is used (0)
Enabled (1)
0
Disabled (0)
1111 (Bin)
Disabled (0)
Disabled (0)
Supported (1)
Feature is activated with SF step 1 (1)
ON (1)
ON (1)
0
Enabled (1)
Enabled (1)
Enabled (1)
Disabled (0)
Enabled (1)
Higher or equal priority (3)
1111
Disabled (0)
Enabled for all UEs (15)
Disabled (0)
Power Balancing is not in use (0)
Allowed (1)
true (1)
Yes (1)
Disabled (0)
Disabled (0)
Enabled (1)
120s (4)
MIB PLMN id not included (0)
Disabled (0)
Disabled (0)
Disabled (0)
Not applicable
4
Enabled (1)
Enabled (1)
Disabled (0)
Enabled (1)
Enabled (1)
Enabled (2)
Enabled (1)
Disabled (0)
Disabled (0)
Disabled (0)
Disabled (0)
Enabled (1)
Supported (1)
Enabled (1)
Enabled AC and signaling unit overload
(3) (0)
Disabled
In use (1)
Post-verification period used (1)
NO (0)
Disabled (0)
No:RNWPlan not updated (0)
Not applicable
disable (0)
Comments
Changed to Enabled(1) Nov 2010 following trial by Pinaki Roychowdhury
RAN1638 Downlink Flexible RLC - This parameter needs to be Enabled(1) for HSPA+ Phase 0 rollout.
RAN1797 Common Channel Setup
Changed to Enabled(1) Nov 2010 following trial by Pinaki Roychowdhury
Enabled by default
Applicable to I-HSPA
Switched ON for rollout of TBO July 2009

Switched ON for rollout of TBO Jully 2009
Changed to Enabled (1) for rollout of TBO July 2009

Change made as per issued Change Request Form
Optimised after Enhanced Priority Based Sceduling Trial in April 2008 - see UKRE/08/020
Set to 1111 (15 internal/decimal) for TBO July 2009
ENABLED Nov 2007 for HSDPA Rollout

Amended in Dec.2010. Value should be set Enabled without E-DCH Trigger (1) across all RNCs in the
network. Originally changed in 2009 with the rollout of SRNS Relocation
Changed in Dec. 2010 as a part of parameter audit. Value should be set to Used(1) for all RNCs across
the network
RAN1322 Fast L1 Synchronisation - ENABLED BY DEFAULT
default value has capability disabled
38035



38143


38140


38221


Weekly
Weekly New in RU20
Weekly New in RU20


Weekly
Daily
Weekly New in RU20

Monthly New in RU20
Weekly
Weekly
Daily
Daily
New in RU20 on TOP
Weekly
New in RU20 on TOP
Monthly
Daily
Weekly

Weekly
Monthly New in RU20
Daily
Daily New in RU20
New In RU50 EP1

New In RU50 EP1
New in RU40
New in RU40
New in RU40
New in RU40
New in RU40
New In RU50 EP1
New in RU40
New In RU50 EP1
New In RU50 EP1

New In RU50 EP1
New In RU50 EP1

New In RU50 EP1
New In RU50 EP1
New in RU40
New In RU50 EP1
New in RU40
New In RU50 EP1
New in RU40
New in RU30
New in RU40
New In RU50 EP1
New in RU30
New In RU50 EP1
New in RU40
New in RU40
New in RU30
New In RU50 EP1
New in RU40
New In RU50 EP1
New In RU50 EP1

New In RU50 EP1
New In RU50 EP1
New In RU50 EP1

New in RU30
New in RU30
9.00
9.01
5.40
8.00
8.00
8.40
8.16
8.00
5.90
9.00
8.17
9.01
9.00
9.00
5.40
9.00
9.01
9.00
8.30
4.00
4.00
4.00
5.60
8.13
9.00
8.13
4.00
9.01
8.00
4.50
4.50
8.00
9.00
9.01
8.40
8.13
8.30
8.30
9.00
8.00
9.00
4.50
8.30
9.00
9.00
9.00
Issue 5.5
8.13
9.00
RNHSPA Parameters
Abbreviated Name

DiscardTimerHSCSVoice
FDPCHAllocMinInterval
FDPCHAndSRBOnHSPATC
FDPCHSetupEC
HSDPAPriority
HSDSCHGuardTimerLowThroughput
HSDSCHQoSclasses
HSPDSCHAdjustPeriod
MACdflowthroughputRelThr
MACdflowthroughputTimetoTrigger
MaxBitRateNRTMACDFlow
MaxEHARQReTxCSAMR10
MaxEHARQReTxCSAMR2
MaxSetOfEDPDCHCSAMR10
MaxSetOfEDPDCHCSAMR2
PowerOffsetEHARQVoice
T1HSCSVoice
T1HSFACH
AARConfigTable - AppGrpId
AARConfigTable - DSCPCode1
AARConfigTable - Precedence
AARConfigTable - TargetSPIforSPI0
ARPWeight - WeightForARP1
ATOSRBsOnHSPA
CPCNRT10msTTI - N10msCPCOptObjective
CPCNRT10msTTI - N10msCQIDTXTimer
CPCNRT10msTTI - N10msCQIFeedbackCPC
CPCNRT10msTTI - N10msInacThrUEDRXCycle
CPCNRT10msTTI - N10msInacThrUEDTXCycl2
CPCNRT10msTTI - N10msMACDTXCycle
CPCNRT10msTTI - N10msMACInacThr
CPCNRT10msTTI - N10msUEDPCCHburst1
CPCNRT10msTTI - N10msUEDRXCycle
CPCNRT10msTTI - N10msUEDTXCycle1
CPCNRT10msTTI - N10msUEDTXLongPreamble
CPCNRT2msTTI - N2msCPCOptObjective
CPCNRT2msTTI - N2msCQIDTXTimer
CPCNRT2msTTI - N2msCQIFeedbackCPC
CPCNRT2msTTI - N2msInacThrUEDRXCycle
CPCNRT2msTTI - N2msInacThrUEDTXCycl2
CPCNRT2msTTI - N2msMACDTXCycle
CPCNRT2msTTI - N2msMACInacThr
CPCNRT2msTTI - N2msUEDRXCycle
CPCNRT2msTTI - N2msUEDTXLongPreamble
CPCStreaming10msTTI - S10msCPCOptObjective
CPCStreaming10msTTI - S10msCQIDTXTimer
CPCStreaming10msTTI - S10msCQIFeedbackCPC
CPCStreaming10msTTI - S10msInacThrUEDRXCycle
CPCStreaming10msTTI - S10msInacThrUEDTXCycl2
CPCStreaming10msTTI - S10msMACDTXCycle
CPCStreaming10msTTI - S10msMACInacThr
CPCStreaming10msTTI - S10msUEDPCCHburst1
CPCStreaming10msTTI - S10msUEDRXCycle
CPCStreaming10msTTI - S10msUEDTXCycle1
CPCStreaming10msTTI - S10msUEDTXLongPreamble
CPCStreaming2msTTI - S2msCPCOptObjective
CPCStreaming2msTTI - S2msCQIDTXTimer
CPCStreaming2msTTI - S2msCQIFeedbackCPC
CPCStreaming2msTTI - S2msInacThrUEDRXCycle
CPCStreaming2msTTI - S2msInacThrUEDTXCycl2
CPCStreaming2msTTI - S2msMACDTXCycle
CPCStreaming2msTTI - S2msMACInacThr
CPCStreaming2msTTI - S2msUEDRXCycle
CPCStreaming2msTTI - S2msUEDTXLongPreamble
CPCVoice10msTTI - V10msCPCOptObjective
CPCVoice10msTTI - V10msCQIDTXTimer
CPCVoice10msTTI - V10msCQIFeedbackCPC
CPCVoice10msTTI - V10msInacThrUEDRXCycle
CPCVoice10msTTI - V10msInacThrUEDTXCycl2
CPCVoice10msTTI - V10msMACDTXCycle
CPCVoice10msTTI - V10msMACInacThr
CPCVoice10msTTI - V10msUEDPCCHburst1
CPCVoice10msTTI - V10msUEDRXCycle
CPCVoice10msTTI - V10msUEDTXCycle1
CPCVoice10msTTI - V10msUEDTXLongPreamble
CPCVoice2msTTI - V2msCPCOptObjective
CPCVoice2msTTI - V2msCQIDTXTimer
CPCVoice2msTTI - V2msCQIFeedbackCPC
CPCVoice2msTTI - V2msInacThrUEDRXCycle
CPCVoice2msTTI - V2msInacThrUEDTXCycl2
CPCVoice2msTTI - V2msMACDTXCycle
CPCVoice2msTTI - V2msMACInacThr
CPCVoice2msTTI - V2msUEDRXCycle
CPCVoice2msTTI - V2msUEDTXLongPreamble
DCellVsMIMOPreference
DPCCHPwrOffsetSecULFreq
EDCHMACdflowtputStrTtT
EDCHMaxHarqReTxSRB
EDCHMaxHarqReTxSRB2MS
EDCHMaxHARQReTxStr
EDCHMaxNumberOfHARQReTx
EDCHQOSClasses
EnablDelayHHO
EnablDelayStand
FactorEDCHMaxBitRate
FactorEDCHMaxBitRate2NRT
FactorEDCHMaxBitRate3NRT
FactorEDCHMaxBRPSstream
HappyBitDelayConditionEDCH
HSDPAPeakRateLimitRABMax
HsdschGuardTimerHO
HSPANBRValues - NBRForPri0DL
HSPANBRValues - NBRForPri0UL
IBAODSCPHighPrioQPart1
IBAODSCPHighPrioQPart2
IBAOHighQueueWeight
InacUserNbrXXXOverNRT
InacUsersOverloadFact
InitialSPINRT
MACdflowtputStrTtT
MACdflowutilStrTtT
MEHCQIFeedbackCycle
MEHHSUPAUserIncr
NRTRBBRWithEDCHStr
PeriodicityForSI
PowerOffsetForSI
SmartHSPATimeToTrigger
SmartHSPATputAveWin
TGPLAMRHSDPAInterFreq
TGPLForLTEMeas
TGPLHSDPAInterFreq
TGPLHSPAInterFreq
ThresholdMaxEDPDCHSR - ThresholdMaxEDPDCHSR1920kbps
VCPHSDPAPrevDuration
VCPHSDPAUserIncr
WeightDCH - WeightDCHBG
WeightDCH - WeightDCHTHP1
WeightHSPA - WeightHSPABG
WeightHSPA - WeightHSPATHP1
CPICHECNOSRBHSPA
CPICHECNOThreEDCH2MS
CPICHRSCPThreEDCH2MS
CPICHRSCPThreSRBHSDPA
EDCHCTSwitchGuardTimer
HSDPACellChangeRepetitionTime
HSDPACPICHEcNoThreshold
HSDPAMaxCellChangeRepetition
HSDPARRCdiversity
HSDPASRBWindow
MaxCSDelayRNCETTI10
MaxCSDelayRNCETTI2
MaxCSDelayUE
HSDPAChaTypeSwitchWindow
HSDPACPICHCTSRepPer
HSDSCHCTSwitchGuardTimer
Telecom Parameters
MaxReWaitTime
MaxReWaitTime2msTTI
MaxReWaitTime2msTTI16
MaxReWaitTimeRT
RNHSPAId
UPResAllocInCellDCHWait
O&M Parameters
RNHSPAChangeOrigin
Full Name
Managed Object
HSDPA Discard Timer for the CS voice service RNHSPA

Minimum interval between F-DPCH allocations RNHSPA
F-DPCH and SRBs on HSPA per TC RNHSPA
DCH instead of F-DPCH based on Establishment Cause RNHSPA
HSDPA priority RNHSPA
HS-DSCH guard timer due to low throughput RNHSPA
HS-DSCH QoS classes RNHSPA
HS-PDSCH code adjustment period RNHSPA
Low throughput threshold of the MAC-d flow RNHSPA
Low throughput time to trigger of the MAC-d flow RNHSPA
Maximum bit rate of NRT MAC-d flow RNHSPA
E-DCH max number of retransmissions CS voice E-TTI 10 RNHSPA
E-DCH max number of retransmissions CS voice E-TTI 2 RNHSPA
Maximum Set of E-DPDCHs for CS voice E-TTI 10 RNHSPA
Maximum Set of E-DPDCHs for CS voice E-TTI 2 RNHSPA
HARQ power offset for E-DCH MAC-d flow of CS voice RNHSPA
HSDPA re-ordering release timer T1 for the CS voice RNHSPA
HSDPA re-ordering release timer T1 for xCCH on HS-FACH RNHSPA
Application Group Identifier RNHSPA

DSCP Code1 RNHSPA
DSCP Code2 RNHSPA
DSCP Code3 RNHSPA
DSCP Code4 RNHSPA
DSCP Code5 RNHSPA
Precedence RNHSPA
Target SPI for SPI 0 RNHSPA
Weight for ARP1 RNHSPA
Offset for activation time of SRBs on HSPA RNHSPA
CPC Optimization objective NRT 10ms TTI RNHSPA
CQI DTX Timer NRT 10ms TTI RNHSPA
CQI Feedback Cycle for CPC NRT 10ms TTI RNHSPA
Inactivity Threshold for UE DRX Cycle NRT 10ms TTI RNHSPA
Inactivity Threshold for UE DTX Cycle 2 NRT 10ms TTI RNHSPA
MAC DTX Cycle NRT 10ms TTI RNHSPA
MAC Inactivity Threshold NRT 10ms TTI RNHSPA
UE DPCCH burst1 NRT 10ms TTI RNHSPA
UE DRX Cycle NRT 10ms TTI RNHSPA
UE DTX Cycle 1 NRT 10ms TTI RNHSPA
UE DTX Long Preamble N10ms RNHSPA
CPC Optimization objective NRT 2ms TTI RNHSPA
CQI DTX Timer NRT 2ms TTI RNHSPA
CQI Feedback Cycle for CPC NRT 2ms TTI RNHSPA
Inactivity Threshold for UE DRX Cycle NRT 2ms TTI RNHSPA
Inactivity Threshold for UE DTX Cycle 2 NRT 2ms TTI RNHSPA
MAC DTX Cycle NRT 2ms TTI RNHSPA
MAC Inactivity Threshold NRT 2ms TTI RNHSPA
UE DRX Cycle NRT 2ms TTI RNHSPA
UE DTX Long Preamble NRT 2ms TTI RNHSPA
CPC Optimization objective Str 10ms TTI RNHSPA
CQI DTX Timer Str 10ms TTI RNHSPA
CQI Feedback Cycle for CPC Str 10ms TTI RNHSPA
Inactivity Threshold for UE DRX Cycle Str 10ms TTI RNHSPA
Inactivity Threshold for UE DTX Cycle 2 Str 10ms TTI RNHSPA
MAC DTX Cycle Str 10ms TTI RNHSPA
MAC Inactivity Threshold Str 10ms TTI RNHSPA
UE DPCCH burst1 Str 10ms TTI RNHSPA
UE DRX Cycle Str 10ms TTI RNHSPA
UE DTX Cycle 1 Str 10ms TTI RNHSPA
UE DTX Long Preamble Str 10ms TTI RNHSPA
CPC Optimization objective Str 2ms TTI RNHSPA
CQI DTX Timer Str 2ms TTI RNHSPA
CQI Feedback Cycle for CPC Str 2ms TTI RNHSPA
Inactivity Threshold for UE DRX Cycle Str 2ms TTI RNHSPA
Inactivity Threshold for UE DTX Cycle 2 Str 2ms TTI RNHSPA
MAC DTX Cycle Str 2ms TTI RNHSPA
MAC Inactivity Threshold Str 2ms TTI RNHSPA
UE DRX Cycle Str 2ms TTI RNHSPA
UE DTX Long Preamble Str 2ms TTI RNHSPA
CPC Optimization objective Voi 10ms TTI RNHSPA
CQI DTX Timer Voi 10ms TTI RNHSPA
CQI Feedback Cycle for CPC Voi 10ms TTI RNHSPA
Inactivity Threshold for UE DRX Cycle Voi 10ms TTI RNHSPA
Inactivity Threshold for UE DTX Cycle 2 Voi 10ms TTI RNHSPA
MAC DTX Cycle Voi 10ms TTI RNHSPA
MAC Inactivity Threshold Voi 10ms TTI RNHSPA
UE DPCCH burst1 Voi 10ms TTI RNHSPA
UE DRX Cycle Voi 10ms TTI RNHSPA
UE DTX Cycle 1 Voi 10ms TTI RNHSPA
UE DTX Long Preamble Voi 10ms TTI RNHSPA
CPC Optimization objective Voi 2ms TTI RNHSPA
CQI DTX Timer Voi 2ms TTI RNHSPA
CQI Feedback Cycle for CPC Voi 2ms TTI RNHSPA
Inactivity Threshold for UE DRX Cycle Voi 2ms TTI RNHSPA
Inactivity Threshold for UE DTX Cycle 2 Voi 2ms TTI RNHSPA
MAC DTX Cycle Voi 2ms TTI RNHSPA
MAC Inactivity Threshold Voi 2ms TTI RNHSPA
UE DRX Cycle Voi 2ms TTI RNHSPA
UE DTX Long Preamble Voi 2ms TTI RNHSPA
Dual Cell versus MIMO preference RNHSPA
DPCCH Power offset for secondary UL frequency RNHSPA
Low throughput time to trigger for streaming E-DCH RNHSPA
E-DCH maximum # of HARQ retransmissions for 10 ms SRB RNHSPA
E-DCH maximum # of HARQ retransmissions for 2 ms SRB RNHSPA
E-DCH max number of HARQ retransmissions for streaming RNHSPA
E-DCH maximum number of HARQ retransmissions RNHSPA
E-DCH QoS classes RNHSPA
Enabling Delay HHO RNHSPA
Enabling Delay Standard RNHSPA
Factor to calculate EDCH maximum bit rate RNHSPA
Factor E-DCH max. Bit Rate for 2 NRT RAB combinations RNHSPA
Factor E-DCH max. Bit Rate for 3 NRT RAB combinations RNHSPA
Factor E-DCH max. Bit Rate for PS streaming RABs RNHSPA
Happy bit delay condition for E-DCH RNHSPA
HSDPA peak rate limitation to the RAB maximum RNHSPA
HS-DSCH guard time after switching to DCH due to HO RNHSPA
Downlink NBR for Priority value 0 RNHSPA
Uplink NBR for Priority value 0 RNHSPA
In Bearer Application Optimization High Queue DSCP Codes Part1 RNHSPA
In Bearer Application Optimization High Queue DSCP Codes Part2 RNHSPA
In Bearer Application Optimization High Queue Weight RNHSPA
Inactive users number in XXX over NRT RNHSPA
Inactive users overload preventive factor RNHSPA
Initial SPI for PS NRT RAB RNHSPA
Low throughput time to trigger of streaming MAC-d flow RNHSPA
Low util time to trigger of MAC-d flow for streaming RNHSPA
Temporary CQI feedback cycle for the Mass Event Handler RNHSPA
HSUPA user increment for the Mass Event Handler RNHSPA
NRT RB user bit rate with E-DCH streaming RNHSPA
Periodicity for scheduling info RNHSPA
Power Offset for Scheduling Info RNHSPA
Time-to-trigger for LFD phone throughput measurement RNHSPA
Window size for LFD phone throughput measurement RNHSPA
TGPL for AMR and HSDPA and IF measurement RNHSPA
Transmission Gap Length for LTE Carrier frequency measurements RNHSPA
TGPL for HSDPA and IF measurement RNHSPA
TGPL for HSPA Inter Frequency Measurement RNHSPA
Threshold to define maximum EDPDCH SR 1920 kbps RNHSPA
Duration of HSDPA prevention for Voice Call Priority RNHSPA
HSDPA user increment for the Voice Call Priority RNHSPA
Weight of NRT DCH UE BG RAB RNHSPA
Weight of NRT DCH UE THP1 RAB RNHSPA
Weight of HSPA UE BG RAB RNHSPA
Weight of HSPA UE THP1 RAB RNHSPA
CPICH EcNo for SRB on HSPA RNHSPA

CPICH ECNO Threshold for E-DCH TTI 2 ms RNHSPA
CPICH RSCP Threshold for E-DCH TTI 2 ms RNHSPA
CPICH RSCP Threshold for SRBs on HSDPA RNHSPA
E-DCH channel type switch guard timer RNHSPA
Window for max repetitive serving HS-DSCH cell changes RNHSPA
CPICH Ec/No threshold for serving HS-DSCH cell change RNHSPA
Max number of repetitive serving HS-DSCH cell changes RNHSPA
SHO of the HSDPA capable UE RNHSPA
CPICH Ec/No window for SRBs on HS-DSCH cell selection RNHSPA
Max buffer time of the HS CS voice in RNC E-TTI 10 ms RNHSPA
Max buffer time of the HS CS voice in RNC E-TTI 2 ms RNHSPA
Max buffer time of the HS CS voice in UE RNHSPA
HSDPA channel type switching window RNHSPA
DCH to HS-DSCH switch CPICH Ec/No reporting period RNHSPA
HS-DSCH channel type switch guard timer RNHSPA
Maximum Reordering Wait Time for MAC-es RNHSPA

Maximum Reordering Wait Time for Mac-es E-DCH 2ms TTI RNHSPA
Maximum reordering wait time parameter for MAC-es E-DCH RNHSPA
Maximum MAC-es Reordering Wait time for RT user RNHSPA
RNHSPA Identifier RNHSPA
Retry time for u-plane resource allocation in Cell_DCH RNHSPA
Change origin RNHSPA

Group
AC
AC
AC
AC
AC
AC
AC
AC
AC
AC
AC
AC
AC
AC
AC
AC
AC
AC
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
HC
HC
HC
HC
HC
HC
HC
HC
HC
HC
HC
HC
HC
Telecom
Telecom
Telecom
Telecom
Telecom
Telecom
O&M
Description
This parameter defines the Establishment Cause values when the Rel99 DCH allocation is used for SRBs in RRC connect
The value 1 means that for the corresponding Establishment Cause, the DCH is used for SRBs (in this case it means that
This value
The parameter0 means defines that thethe HSDPA
corresponding DiscardEstablishment
Timer value forCause the HS-DSCH
prefers toMAC-d flow of th
use E-DCH/HS-DSCH for UL/DL SRBs (means
This parameter also determines whether
The parameter determines the minimum interval between two consecutive Fractionala priority conversational call can be mapped to just DCH when RAB is being setu
Note
DPCH that Emergency
(F-DPCH) and priority
allocations of the call is kept
certain UE. onTimer
it is whole
is lifetime
started afteronevery
DCH transport channel if Bit 5 is set 1 (default value)
This parameter defines the traffic classes (TC) and traffic handling priorities (
successfully executed F-DPCH to DPCH reconfiguration. During the time period, F-
Note
DPCHthat Bit 0 (Conversational
allocation is forbidden. IfCall) the value and Bit of 5 the(Emergency
parameter Call) is sethasto 0,anconsecutive
effect just to F-UEs indicating support for CS voice o
DPCH allocations
Parameter is applicable are nottorestricted.
the HSDPA static resource allocation. It is ignored in the
Timerofshould
case HSDPA bedynamic
stopped resource when new RAB is set
allocation. up, that the
It defines is, F-DPCH allocation
relative priority between should
HSDSCHGuardTimerLowThroughput
not setup phase. is a UE-specific timer. It is started after a release o
NRTbe restricted
DCHs and MAC-d in RABflows.
This parameter defines the traffic classes (TC) and traffic handling priorities (TH
HSDPAPriority=1
This parameter defines the period for adjustment (upgrade/downgrade) for the HS-P
When the first MAC-d flow in the cell is allocated, the total non-controllable
This parameter
transmitted power defines
has tothe below below throughput
or equalthresholdto PtxTargetHSDPA,of the throughput beforemeasurement
the HS-
The
of
DSCHtheparameter
MAC-d can
flow.
can be selected. be used to restrict the maximum bit rate of NRT MAC-d flow. The bit rate used in the reservation of the
This parameter defines the low throughput time necessary to trigger the timer of the
If the averaged PtxNonHSDPA exceeds or equals PtxTargetHSDPA +
If
Thethethreshold
value 0 isisused,
PtxOffsetHSDPA, defined then
the overloadasthisa numberparameter
control of does
bits
actions per not
are restrict
second.
targeted The the maximum
throughput
primarily to NRT bit rate,
DCH(s). but the maximum bit rate is restricted by
measurement
This
Only parameter
if there are measures
no morethe
determines NRT thenumbermaximum
DCH(s) ofinbits transmitted
number
the cell, all of MAC-d
HARQ by MAC-d during
retransmissions
flows in the cellthefor sliding
are the E-
measurement
DCH
released.MAC-d flow window.
of the CS the voice RAB when the E-TTI is 10retransmissions
ms.
This parameter determines maximum number of HARQ for the E-
Information
DCH MAC-d is signaled
flow of the toCS UE using
voice RABRRC: when E-DCH the MAC-d
E-TTI is flow
2 ms. maximum number of
This parameter determines
retransmissions information the Maximum Set of E-DPDCHs when the CSNumbervoice RAB
HSDPAPriority=2
Information
is transferred is assignaled
a single UEelement
to service using E-DCHRRC:and to
MAC-d
BTS
E-DCH using
MAC-d
flow and
NBAP:
flow
the
Maximum
maximum
E-TTI is 10 number
ms. ofof
Retransmissions
When
This the
parameter
retransmissions first MAC-dfor
determinesE-DCH
information flow in information
the the
element cell
Maximum is element.
allocated,
and to BTSSet of the
E-DPDCHs
using total
NBAP: transmitted
when the
Maximum carrier
CS voice
Number powerRAB
Quantity
has
is to beisbelow
transferred a part or ofsingle
asdefines
afor the E-DPCH
equal to PtxTargetHSDPA,
service information.
E-DCH MAC-d Itbefore
isflow
signaled
the HS-DSCH
and theto E-TTI
UE in is
the
can2 RRC IE of
be selected.
ms.
Retransmissions
This
Maximum parameter E-DCHthe information
HARQ power element.
offset value for the E-DCH MAC-d flow of the C
If the averaged
Quantity ischannelisation
a part PtxNonHSDPA
of the E-DPCH codesexceeds and to BTS
information. inItthe
or equals NBAP IEtoMaximum
PtxTargetHSDPA
is signaled UE in the + SetRRC of E- IE
DPDCHs.
PtxOffsetHSDPA,
This
Maximum parameterchannelisation the overload
defines the value
codes control
andof theto actions
HSDPA
BTS in are
the targeted
re-ordering
NBAP IE to MAC-dtimer
release
Maximum flows
SetT1 ofand E- all
for the
MAC-d flows
HS-DSCH
DPDCHs. MAC-din theflow cell ofare thereleased.
CS voice bearer. In the expiration of the timer, the
This parameter defines the value of the HSDPA re-ordering release timer T1 for the
reordering
Common MAC entityFlow in the UE releases
Priority QueuesMAC-ehs transmitting PDUs BCCH,to the CCCHupperand/or
layersDCCHeven though data
there
on HS-FACH. In the expiration of the timer, the reordering entity in the UEuse
were outstanding PDUs with lower sequence numbers. BTS might the
releases
timer
Identifier
MAC-ehs to stop
ofPDUs theApplication
the HSDPA
to the upper retransmission
Grouplayers caseofthough
in even ofthe associated
Application
there were MAC-ehs
Aware RAN PDUs.
outstanding feature.A
PDUsset withof
applications
lower sequence requiring
numbers. the same treatment
This parameter defines the DSCP code assigned to a corresponding Application at RAN might be grouped by the operator
into
Group Application
incase ofdefinesGroups.
Application There Aware can RAN be maximum feature. One of sixApplication
ApplicationGroup Groups may defined
contain by
This
the
BTS parameter
operator
might use in case
the of
timer the
to DSCP
Application
stop the code
Aware
HSDPA assigned
RAN to a corresponding
feature.
retransmission of the Application
associated MAC-
IP
Grouppacketsincasemarked ofdefines with different
Application Aware DSCP RANcodes. feature.One HenceApplication
in case of Application
Group mayAware contain
ehs
This
RAN PDUs.
parameter
feature the operator thecan DSCP define code a assigned
maximum to 5a DSCP
of corresponding
codes perApplication
application
IP
Grouppackets
Default value
incasemarkedor with
special
ofdefines
Application different
value Aware '255'DSCP means
RAN codes.that
feature.One Hence
the in
Applicationcase of Application
Group Identifier Aware has
group.
This
RAN
not been
DSCPthe
parameter
featuredefined
Code1,
operator
by
DSCP
the the can
operator
Code2,
DSCP defineandcodeDSCP
a maximum
hence
Code3,
assigned cannot of 5aApplication
toDSCP
be DSCP Code4,
corresponding
codes
used.Allowed
Group
DSCP
per
mayCode5
Application
application
range is
contain
1 to 6
IP
Grouppackets
parameters incasemarked
indicate
of with
the
Application different
5 uniqueAware DSCP
DSCP
RAN codes.
codes
feature.One Hence
that DSCP
can inbecase
Application of Application
assignedGroup to an
may Aware
application
contain
group.
with
This
RAN stepDSCP
featuresize
parameter Code1,
of 1.
defines
the operator DSCPthe Code2,
DSCP
can define codeDSCP Code3,
assigned
a maximum to a
of 5 DSCP Code4,
corresponding
codes DSCP Code5
Application
per application
group.
IP packets
parameters marked
indicate with
the different
5 unique DSCP
DSCP codes.
codes Hence
that DSCP
can inbecase of Application
assigned to an Aware
application
Group
group.
This incase
DSCP
parameter ofdefines
Application
Code1, DSCPthe Aware
Code2,
precedence RANDSCP feature.One
value Code3,
assigned Application
to Code4,
a Group
DSCP
corresponding mayCode5 contain
RAN
group.
IP feature
packets the
marked operator
with can
different define
DSCP a maximum
codes. of
Hence 5 DSCP
in case codes
of per
Applicationapplication
Aware
parameters
DefaultDSCP
Application value indicate
Groupor special the
incase 5 unique
value DSCP
'255' means codes
that that
the DSCPcan be assigned
code hasDSCP to an
not been application
defined
group.
This
RAN
group. parameter
feature Code1,
the defines
operator DSCPtheof
can
Application
Code2,
value define of theDSCP Aware
Target
a maximum Code3,RAN feature.Precedence
DSCP
SPIofchoosen
5 DSCP Code4,
for an application
codes per
value
Code5
application group
or assigned
dictates
parameters
Default what
value by SPIthe
indicate
or operator
should
special the 5 be for
chosen
unique
value the corresponding
DSCP
'255' means when packets
codes
that that application
belonging
can
the feature.
DSCP be group
to
assigned
code has and
multiple
to an
not beenhence
application
application
defined
with
group.
This Initial
DSCP
parameterSPI 0 in
Code1,
definescaseDSCP of Application
Code2, DSCPAware RAN
Code3, DSCP This
Code4, parameter
DSCP indicates
Code5
cannot
groups
group.
or
the assigned
new
be
are
SPI
used.
detected
by Allowed
the
assigned bytothe
operator rangevalue
RNC.
for'255'
aunique
given
is of
the The thelowest
application
63Target
0 corresponding
to withvalue SPI size
step
group
choosen of 1. for
of precedence
application
after promotion
an means
group
application
and highest
hence
group
parameters
Default
with value
Initial
priority.Default SPIindicate
or1value
special
in the
case
or 5of
valueApplication
special valueDSCP
means codes
Aware
'255' that
means RANthat
thethat canthe
DSCP be
feature.This code hasornot
assigned
parameter
Precedence
demotion
to an
been
value
of
application
defined
indicates
has not
This
cannot
Initial
group. parameter
SPIbe 0used.
or nodefines
Allowed
change therange
. value is of the63Target
0 corresponding
to with step SPI sizechoosen of 1. for an application group
or
the
been assigned
new
Default SPI
defined
value by by the
assigned
the operator
to
operator a for
given for theapplication
a given group
application application
after
group promotion
and group
hence orand hence
demotion
cannot be of
with
This Initial
parameterSPIor10 special
in case
defines
value
ofvalue '255' means
Application Aware that RAN the DSCP feature.Thiscode has not beenindicates
parameter defined
cannot
Initial
or
the SPI
used.Allowed
assigned
new
Default
be 1used.
SPI
value
or
by or
no Allowed
range
the
assigned change 1the
is to
operator
special
range
to
a. given
value 6forwith is of
the
'255' step the63
application
means
Target
0 corresponding
to size with
that
SPI size
step
ofgroup
1. the
choosen of 1. for
application
after
Target promotion
SPI
an
group
for
application
orand hence
demotion
Initial SPI 0
group
hasof not
with Initial SPI 11 in case of Application Aware RAN DSCP
feature.Thiscode has not been
parameter defined
indicates
This
cannot
Initial
been parameter
SPIbe 10
definedused. or
by defines
Allowed
no
the change the
operator range
.valueand is of the63Target
0hence
to with step
cannot SPIbe choosen
size
used. 1. for
ofAllowed anrange
application
is 0 to group
11
or
the assigned
new
Default SPI
value by the
assigned
or2 specialoperator
tovalue for
a Application
given the
'255' corresponding
application
means thatgroup application
after
the feature.This
Target promotion group
SPI for and hence
or demotion
Initial SPIindicates
1 has of not
with
with Initial
step SPI in case of Aware RAN parameter
This
cannot
Initial
been SPIbesize
parameter
definedused.
11 orofno
by 1.
defines
Allowed
the change the
operator range
. valueand is of the63
0hence
to Target
with step
cannot SPIbe choosen
size
used. 1. for anrange
ofAllowed application
is 0 to group
11
the
with new
Default SPI
value
Initial SPI assigned
or3 special
in case tovalue
a Application
of given '255'application
means Aware thatgroup
RANthe after
Target promotion
SPI for or demotion
Initial SPIindicates
10 has of
with
This
Initial
not step
beenSPI size
parameter2 or
defined of
no 1.by
defines
change
the the . value and
operator of the Target
hence SPI feature.This
cannot choosen
be used. for parameter
an application
Allowed range is group
0
Note
the new
Default
with
that the
SPI
value
Initial SPI
Initial
assigned
or4 special
in
SPI
case
for
tovalue
of
PS
a Application
given NRT
'255' HSPA/HSDPA
application
means Aware thatgroup
RAN
RAB
after
the feature.This
Target is set
promotion
SPI foraccording to
or demotion
Initial
parameter
the
SPIindicates
11 has ofto 11
with
This step size
parameter
RNHSPA-InitialSPINRT
Initial SPISPI 3 or of 1.
defines
no by change the value
parameter of the
when Target
Qos SPI
Aware choosen
Scheduling for an application
feature is disabledgroup
not
Note
the
with
been
new
Default that defined
the
value
Initial SPI
Initial
assigned
or5 special
in
the
SPI
case tofora. Application
operator
value
of
PS '255'
given NRT and
application
means hencethat
HSPA/HSDPA
Aware
cannot
group
RANthe RAB be used.
after
Target
feature.
is set Allowed
promotion
SPI
This
according range
to the
or demotion
forparameter
Initial SPI 2ishas0oftonot
indicates
11
while
with
This Application
step size
parameter
RNHSPA-InitialSPINRT of Aware
1.
defines RAN
the value
parameter is enabled.
of the
when Target
Qos SPI
Aware choosen
Scheduling for an application
feature is disabledgroup
Initial
been SPISPI
defined4 or bynothe change
operator a. Application
PSand hence cannot beRAB used.is Allowed range is 0
Note
the
with
while
new
Default that
Initial
the
value
SPI
Application
Initial
assigned
or6 special
in
Aware
SPI
case tofor
value
of
RAN
given NRT
is'255'
HSPA/HSDPA
application
means
enabled. Aware thatgroup
RANthe after
Target
feature.
set according
promotion
SPI
This forparameter
Initial to
or demotion
SPI 3tohas
the 11
indicatesof not
with
This
If Qos
been step
Awaresize
parameter
Initial SPI
defined0 or of
byno
HSPA 1.
defines
thechange the
Scheduling
operator . value
parameter and of
feature the
when
hence Target
is Qos
enabled
cannot SPI
Awarebe choosen
Scheduling
simultaneously
used. for
Allowed an application
feature
with
range is disabled
Application
is 0 to group
11
Note
the new
Default that the
SPI
value Initial
assigned
or8 special SPI for
tovalue PS
a Application
given NRT HSPA/HSDPA
application group RAB
after is set
promotion according to
or demotion the of not
with
while
Aware
with
This Initial
step SPI
Application
RAN size
parameter
RNHSPA-InitialSPINRT feature
of in
Aware
1.
definescase
thenthe of
RAN
the value
parameter is'255'
Initial of
means
enabled.
SPItheAware
when is
that
choosen
Target
Qos
RANthe feature.This
SPI
Aware
Target
according
choosen
Scheduling
SPI for
for the
an
Initial
to parameter
SPIindicates
principles
application
feature is
4 has
defined
disabledgroup
Initial
If Qos
been
Note
the new SPI
Aware
defined
that 6
the
SPI or byno
HSPA the
Initial
assigned change
Scheduling
operator
SPI for .
tovalue PS and
a Application
given feature
NRT hence is
HSPA/HSDPA
application enabled
cannot group be simultaneously
used.
RAB
after is Allowed
set with
range
according Application
is
to 0
the to 11
Default
by
with
while
AwareQos value
Aware
Initial
RAN SPI
Application or8 special
HSPA
feature in
Aware Scheduling
case
then of
RAN
the is'255'
Initial
means
feature
enabled.
SPI Aware
is
that
iechoosen
basedRANtheon thepromotion
Target
feature.This
according
SPI for
TC/THP/ARP or demotion
Initial
to parameter
the
SPIindicates
principles
5 has
combination of not
defined
with
Initial
If Qos
been step
SPI
Awaresize
defined8 or of
no
HSPA
by 1.
thechange parameter
Scheduling
operator . and featurewhen
hence is Qos
enabled
cannot Awarebe Scheduling
simultaneously
used. Allowed feature
with
range is disabled
Application
is 0 to 11
via
Note
the RNPS-QosPriorityMapping
that
newAware
Default the Initial
SPI assigned
value or specialSPI for
tovalue PS
a given parameter.
NRT HSPA/HSDPA
application group RAB
after is set
thepromotion according to
or demotion the of not
by
while
Aware
with
Qos Application
stepRAN size
HSPA
feature
of Aware Scheduling
then RAN
the is'255'
Initial
means
feature
enabled.
SPI is
that
iechoosen
based theon Target
according
SPI for Initial
TC/THP/ARP
to the
SPI 6 has
combination
principles defined
Initial
If Qos
been
via
Note SPI
Aware
defined8 or no1.
HSPA
by
RNPS-QosPriorityMapping
that the the
Initial change parameter
Scheduling
operator
SPI for . PS and featurewhen
hence
parameter.
NRT HSPA/HSDPA Qos
iscannot
enabledAwarebe Scheduling
simultaneously
used.
RAB is Allowed
set feature
with
range
according is
is
to disabled
Application
0
the to 11
Default
by
whileQos value or
Aware
Application special
HSPAAware value
Scheduling
RAN is'255' means
feature
enabled. that
iechoosen
based theon Target SPI for Initialcombination
the TC/THP/ARP SPI 8 has not
Aware
with stepRAN size
of 1. then the Initial
parameter SPI
when is Qos Aware according
Scheduling to the principles
feature is defined
If Qos
been
via
Note
Default
Aware
defined
that the
value
HSPA
by
RNPS-QosPriorityMappingthe
Initial
or special
Scheduling
operator
SPI for
valuePS and feature
NRT
'255' hence
parameter. iscannot
HSPA/HSDPA
means
enabled
that be
the
simultaneously
used.
RAB
Target is Allowed
set
SPI
with
range
according
for Initial is disabled
Application
to
SPI 0
the
8 tohas
11 not
by
while
AwareQos Aware
Application
RAN HSPA
feature Aware Scheduling
then RAN
the feature
is enabled.
Initial SPI is ie based
choosen on the
according TC/THP/ARP
to the combination
principles defined
with
If Qos step
Awaresize
RNHSPA-InitialSPINRT of 1. parameter when Qos Aware Scheduling feature is disabled
been
via
Note
by Qos that the HSPA
defined
Aware
by theSPI
Initial
HSPA
Scheduling
operator
for PSand
Scheduling
feature
hence
parameter.
NRT iscannot
HSPA/HSDPA
feature
enabled
iechoosen
based on
besimultaneously
used.isAllowed
RAB set according
the TC/THP/ARP
with Application
range is 0
to the
combination
to 11
while
Aware
with Application
stepRAN size
of Aware
1. then RAN
the
parameter is enabled.
Initial SPI
when is Qos Aware according
Scheduling to the principles
feature is defined
disabled
If
viaQos
Note Aware
that the HSPA
Initial Scheduling
SPI for PS NRT feature
parameter. is enabled simultaneously
HSPA/HSDPA RAB isTC/THP/ARP
set accordingwith Application
to the
by Qos Aware HSPA Scheduling
while Application Aware RAN is enabled. feature ie based on the combination
This parameter defines the value of the Target SPI choosen for an application group
with
This Initial parameterSPI 9defines
in caseweight of Application
for the ARP Aware value RAN1.feature.This parameter indicates
the new SPI assigned to a given application group after promotion or demotion of
This
Initial parameter defines weight for the ARP value 2.
If QoSSPI 9 or no
Prioritization change
is not .activated in the cell, then the fixed value 100 is used
This
(meaning parameter defines
multiplier 1isinnotweight
weight for the ARPcausing
calculation value 3.that ARP has no effect on the
If
Default QoS Prioritization
value or special activated
value '255' meansto the cell, that then the fixed
the Target SPIvalue 100 SPI
for Initial is used 9 has not
weight).
This
(meaning parameter defines
multiplier 1 in activation
weight time
calculation when the be
causing SRBs
that mapped
ARP has on
no E-DCH/HS-DSCH
effect on the is in
been defined by the operator and hence cannot
If QoS Prioritization is not activated to the cell, then the fixed value 100 is used used. Allowed range is 0 to 11
weight).
with
The
(meaning step size
parameter ofdefines
multiplier 1. 1 inthe CPCcalculation
weight Optimization causingobjective
that ARP for UEs hassupporting
no effect on and theusing
Continuous
weight. Packet Connectivity.
The parameter defines the number of subframes after an HS-DSCH reception during
Note that the Initial SPI for PS NRT HSPA/HSDPA RAB is set according to the
which
The parameter the CQI reports
defines have
the higher
CQI prioritycycle
feedback than the DTX pattern.
for HSDPA This
when featurethe CQIis part of CQI
Optimization objective parameter
can be: when Qos Aware Scheduling isreporting
disabledis
Reporting
not reduced reduction subfeature.
-while
The Round Trip because
Application
parameter Time Aware
(RTT)
defines oftheDTX.
RAN This
is
optimization
number isofpart
enabled. of CQI Reporting
subframes after an HS-SCCH reductionreceptionsubfeature. or after
-the
This Battery
first consumption
slot
parameter of anis HS-PDSCH
used optimization
for NRT reception,
when 10 during
ms TTI which
is used the onUE is
E-DCH. required to monitor
The
This
If Qosparameter
parameter
Aware HSPA defines
is used the
Scheduling number
for NRT when
feature of consecutive
10is msenabled E-DCH
TTI issimultaneously
usedThis onTTIs
E-DCH. without
with an E-DCH
Application
the HS-SCCHs
transmission, in
after the
which UE's theHS-SCCH
UE should set continuously.
immediately move is part
from UE ofDTX
Discontinuous
Aware
The
DL RAN
RNC delivers
parameter
Reception feature
defines
(DL then
DRX) thethe
the parameter Initial
lengthvalue
subfeature. SPI
of MAC is choosen
to the DTX BTS,
Cycleaccording
which to the
takes careThis
in subframes. of the isCycle
principles 1 to
defined
a pattern
UE
Note!
by DTX
Qos
optimization.
of time CQI Cycle
Aware
instances 2.
reporting
HSPA This
where is
cycles part
Scheduling
the startof
values DPCCH bigger
feature
of the time Gating
iethan
uplink based (UL
10ms on DTX)
are
the notsubfeature.
recommended
TC/THP/ARP combination
Th
via parameter defines
RNPS-QosPriorityMapping E-DCH inactivity
parameter. in E-DCH
TTIs, after transmission
which the after UE can inactivity
start E- is
allowed.
This
DCH This
parameter
transmission is part
is used of
only Discontinuous
for NRT
at given when
times. UL
10
This Reception
ms TTI
islength is (MAC
used on DTX)
part ofinifDiscontinuousE-DCH. subfeature.
UL Reception
This
The
This parameter
CQI parameter
feedback
parametercycle also
defines
is used defines
shorter
the UL
for NRT theDPCCH
than value
4 ms 10
when of
is Inactivity
not
burst TTI isThreshold
ms allowed used DC-HSDPA
subframes for UE
on E-DCH. Grant
and
when UEMonitoring.
MIMO DTX are
(MAC
simultaneously
Cycle 1DTX)
is subfeature.
applied.configured
This is in
part use of for the
DPCCH UE.Gating (UL DTX) subfeature.
This
The parameter
parameter is used
defines for
the NRT
UL DPCCHwhen 10
burstms TTI
lengthis used on
in subframes E-DCH. when UE DTX
This
Note! parameter
This is used
parameter for NRT
value must whenbe an10 ms TTI
integer is used
multiple ofontheE-DCH.
N10msUEDTXCycle1
Cycle
This
The 2 is
parameter
parameter applied. is This
used is
for part
NRT of DPCCH
when 10 Gating
ms TTI (UL
is usedDTX) on subfeature.
E-DCH.
DC-HSDPA
This
parameter parameter withis
value. used
used to
isMIMO fordefine
simultaneously
NRT when the HS-SCCH ms TTIreception
configured
10 isinused
use on pattern
for the UE
E-DCH. (UEdoubles
DRX Cycle) the
length
amount
The in subframes.
of
parameter CQI reporting.
defines Thisthe parameter
UE sends
UL DPCCH defines
two consecutive
burst a multiple
pattern CQI or
length a divisor
reports: which
one for is
theused with
primary
This
the parameterUE
parameter is used
DTX for NRT
Cycle 1 when
to define 10 ms TTI
UE DRX isCycle
used on in
value
subframes for UE
E-DCH.that is used. If the
DTX
carrier
Cycle immediately
1. This is defines followed
part of DPCCH by another
Gating (UL one DTX)for the secondary
subfeature. carrier. This affects
The
value parameter
performance is not allowed,
of the CQI thethe UL DPCCH
parameter
reporting valueburst
reduction. minus pattern lengthtoincalculate
1 is used subframes a newfor UE DTX
value,
Cycle
and so 2. This
on. is
This part
is
parameterofdetermines part of DPCCH
of Gating
Discontinuous
in slots (UL
DL DTX)
Reception subfeature.
(DL DRX) subfeature.
The minimum this parameter andthe thelength
"Max of UEthe DTXlong preamble
Cycle" signaled associated
by the BTS with is
the
used. UE DTX
parameter Cycle 2. This is part of DPCCH Gating (UL DTX) subfeature.
The parameterofdefines
This minimum isthis
used the
parameter CPCand
for NRT Optimization
when the10"Maxms TTI objective
UEisDTX used foronUEs
Cycle" supporting
signaled
E-DCH. by the andBTS usingis
Continuous
used.
The Packet Connectivity.
This parameter
parameter defines is used the number
for NRT when of subframes
10 ms TTI is after
used anon HS-DSCH
E-DCH. reception, during
which the
parameter CQI reports
defines have
the higher
CQI priority
feedback than
cycle the DTX pattern. This is part of CQIis
The
This
Reporting Optimization
parameterreductionis objective
used can be:
for NRT
subfeature. when 10 ms TTIforis HSDPA
used onwhen E-DCH. the CQI reporting
Note!
not
-The When
reduced
Round changing
Trip because
Time (RTT) the
ofthe value
DTX. of this
This isofpart
optimization parameter, the
of CQI Reporting value of N10msUEDTXCycle2
reductionreceptionsubfeature.
parameter defines number subframes after an HS-SCCH or after
should
-the Battery
Note! beconsumption
This checked
parameter whether it is an
optimization
value must be integer
an integermultiple of this
multiple of parameter
the value.
N10msUEDTXCycle1
This
The first slot
parameter
used
defines for NRT reception,
when 2 msduringTTI which
is used the
on UE
E-DCH.is required to monitor
Note!
This
parameter Changing
parameter value. isvalue
used ofthethis
for number
NRT parameter
when of consecutive
2 changes
ms TTI isalso E-DCH
used the
on TTIs
value
E-DCH. without
of an E-DCH
the HS-SCCHs
transmission, in
after the
which UE's theHS-SCCH
UE should set continuously.
immediately moveThis is part
from UE ofDTX
Discontinuous
N10msUEDRXCycle
RNC
The
DL delives the
parameter
Reception defines
(DL DRX)
parameter
parameter the value to
length
subfeature.
because
of BTS
MACwhich it is a
DTX Cycle multiplier
takes in care or a divisor This isCycle
of
of the optimization.
subframes. this 1 to
a pattern
UE
of DTX
parameter.
Note!time CQI Cycle 2.
reporting
instances This is
cycles
whereE-DCH part of
values
the start DPCCH bigger
of the uplinkGating
than (UL
10ms DTX)
are notsubfeature.
recommended
The
Note:
Note! parameter
When
This defines
changing
parameter the
value value
must inactivity
ofbe thisan time inE-DCH
parameter,
integer TTIs
check
divisor
transmission
after
oronawhich
that thethe
multiple
after
ofUE
value the
inactivity
ofcan start E-
parameter
is
This
allowed.
This parameter
This
parameter is is
part
is used
used of for
for NRT
Discontinuous
NRT when
when 2
UL
2 ms
ms TTI
Reception
TTI is
is used
used(MAC on E-DCH.
DTX)
E-DCH. subfeature.
DCH
This transmission
parameter
N10msMACDTXCycle
N2msUEDTXCycle2
The parameter also
definesonly isatan
defines
value.
the given
ULintegertimes.
theDPCCH
value This
of
multiple
burst isof
Inactivity part
length ofinDiscontinuous
thisThreshold
parameter
subframes for UE
value. UL
whenGrantReception
UEMonitoring.
DTX
(MAC
Cycle 1DTX)
is subfeature.
applied. This is part of DPCCH Gating (UL DTX) subfeature.
This
The parameter
parameter is used
defines for
the NRT
UL DPCCHwhen 2 ms
burst TTI is
length used on
in subframes E-DCH. when UE DTX
This
CQI
Note! parameter
feedback
This is used
cycle
parameter shorterfor NRT
value thanwhen
must 4bems an2 ms
notTTI
isinteger is used
allowed
multiple on
if DC-HSDPAE-DCH.
of the and MIMO are
N2msUEDTXCycle1
Cycle
This
The 2 is
parameter
parameter applied. is
is This
used
used is
for
to part
NRT
define of DPCCH
when
the 2 ms
HS-SCCH Gating
TTI is (UL
used
reception DTX)on subfeature.
E-DCH.
pattern (UE DRX Cycle)
simultaneously
This parameter
parameter value. configured
is used for in
NRT use whenfor the
2 UE.
ms TTI is used on E-DCH.
length
The in subframes.
parameter defines Thisthe parameter
UL DPCCH defines a multiple or a divisor which is used with
This
the parameterUE
parameter is used
DTX for NRT
Cycle 1 when
to define 2burst
msUE TTIpattern
DRX is used
Cycle
length
onvalue
in subframes for
E-DCH. that is used.
UE DTX
If the
DC-HSDPA
Cycle with
1. This is definesMIMO
part of DPCCH simultaneously Gating (UL configured
DTX) in use
subfeature. for the UE doubles the
The parameter
value
amount is of
notCQIallowed,
reporting. thethe ULsends
parameter
UE DPCCH twoburst
value minus
consecutivepattern length
1 is used toincalculate
CQI reports: subframes
one for a newfor
theUE DTX
value,
primary
Cycle
and
carrier so 2. This
on. is
This
immediately part
is
parameterofdetermines part of DPCCH
of
followed by
in slotsGating
Discontinuous
another (UL
DL
one DTX)
Reception
for subfeature.
the (DL
secondary DRX) subfeature.
carrier. This affects
Cycle" signaled associated
by the BTS with is
performance
the
used. UE DTX of the2.
Cycle CQI This reporting
is part ofreduction.
DPCCH Gating (UL DTX) subfeature.
The parameter
parameterofdefines
This minimum isthis
used the
parameter CPCand
for NRT Optimization
when the "Max
2 ms TTI objective
UE is DTX
usedCycle"for UEssignaled
on E-DCH. supporting by the andBTS usingis
Continuous
used.
This parameter
parameter defines is used the number
for NRT when of subframes
2 ms TTI isafter usedan onHS-DSCH
E-DCH. reception during
which the
defines have
the higher
CQI priority
feedback than
cycle the DTX pattern.
when This is part of CQIis
The
This Optimization
Reportingparameterreductionis objective
used can be:
for NRT
subfeature. when 2 ms TTI for HSDPA
is used on E-DCH. the CQI reporting
Note!
not
-The When
reduced
Round changing
Trip because
Time (RTT) the
ofthe value
DTX. of this
This isofpart
of CQI Reporting value of N2msUEDTXCycle2
should
-This
Battery
Note! beconsumption
This checked
parameter whether this isbe
optimization
value must anan integer
integer multiple
multiple ofof this
the parameter
N2msUEDTXCycle1 value.
the
The first slot
parameter
used
defines for reception,
streaming when during10 mswhich
TTI the
is UE
used is
on required
E-DCH. to monitor
Note!
This Changing
parameter
used ofthethis
for number
parameter
streaming of when
consecutive
changes 10 msalso E-DCH
TTI the
isThis TTIsonwithout
value
used ofE-DCH. an E-DCH
the HS-SCCHs
transmission, in
after the
which UE's theHS-SCCH setimmediately
continuously. is part ofDTX
Discontinuous
N2msUEDRXCycle
The
DL RNC delivers
parameter(DL
Reception the
defines parameter
DRX) parameter
the length of MAC DTX Cycle in subframes. This isCycle
UE
subfeature.
should
because
value toit is
the a multiplier
BTS, move
which or afrom
takesdivisorUE
care ofofthis
the 1 to
parameter.
a pattern
UE
Note:
Note!DTX When
CQI
optimization.
of time Cycle 2.
changing
reporting
instances This is
the
cycles
where part
value
thevaluesof
start DPCCH
of this
ofbigger Gating
parameter,
the uplinkthan E-DCH (UL DTX)
check
10ms are subfeature.
that the
not recommended.
transmission value of
The parameter
N2msMACDTXCycle defines E-DCH
isDiscontinuous
an integer inactivity
multiple time of in thisTTIs after
parameter whichvalue. theafter
UE can inactivity
start E-is
allowed.
This This
parameter is part
is used of forgiven
streaming UL Reception (MAC DTX) subfeature.
DCH
This
The transmission
parameter
This parameter
parameter defines also only
is used
at
defines
the UL
for streaming valuewhen
times.
theDPCCH This
of 10
Inactivity
burst
when
ms TTI
is part
10length
is usedfor
ofinDiscontinuous
Threshold
ms TTI is used onUE
subframes
on E-DCH.UL
whenGrant
E-DCH.
Reception
UEMonitoring.
DTX
(MAC
Cycle 1DTX)
is subfeature.
This
The parameter
parameter is used
defines for
the streaming
UL DPCCH when 10
burst10length ms TTI is used
in subframes on E-DCH.
when UE DTX
This
Note! parameter
This is used
parameter for streaming
value must be an when
integer ms TTI
multiple isofused
the on E-DCH.
S10msUEDTXCycle1
Cycle
This
The 2 is
parameterapplied. is This
used is
for part of
streaming DPCCH when Gating
10 ms (UL
TTI DTX)
is used subfeature.
on E-DCH.
This parameter
parameter
parameter value. is
is used
used to fordefine
streaming the HS-SCCH
when 10 ms reception
TTI is used pattern on (UEE-DCH.DRX Cycle)
length in
The parameter subframes.defines Thisthe parameter
UL DPCCH defines a
burst10pattern multiple or
length a divisor
in subframes which is used
for UE DTX with
This
the parameterUE
parameter is used
DTX for streaming
Cycle 1 to definewhen UE DRXms TTI
Cycle is used
value on
that E-DCH.
is used. If the
Cycle
The 1. This is defines
part of DPCCH Gating (UL DTX) subfeature.
valueparameter
is not allowed, thethe UL DPCCH
parameter valueburst minus pattern lengthtoincalculate
1 is used subframes a newfor UE DTX
value,
Cycle
and so 2.on.This is part
This is part of of
DPCCH Gating (UL
Discontinuous DL DTX)
Reception subfeature.
The minimum of this parameter and the "Max UE DTX Cycle" signaled by the BTS is
used.
The
This minimum
parameterofisthis parameter
used and the
for streaming "Max
when 10UE
msDTX Cycle"
TTI is used signaled
on E-DCH.by the BTS is
used.
This parameter is used for streaming when 10 ms TTI is used on E-DCH.
This parameter is used for streaming when 10 ms TTI is used on E-DCH.
Note! When changing the value of this parameter, the value of S10msUEDTXCycle2
should be checked
Note! This whether
parameter this isbe
value must anan
integer multiple
integer ofof
multiple this
theparameter value.
S10msUEDTXCycle1
The parameter determines in slots the length of the long preamble associated with
the
TheUE DTX Cycle
parameter 2. This
defines theisCPC
part Optimization
of DPCCH Gating (UL for
objective DTX) subfeature.
UEs supporting and using
Continuous
This parameter
parameter defines is used the number of when
for streaming subframes 10 msafterTTI is anused
HS-DSCH on E-DCH. reception during
which
The parameter the CQI reports
defines have
the CQI higher priority than the DTX
feedback cycle for HSDPA when the CQI pattern. This is part of CQIis
reporting
reduction objective
subfeature. can be:
not
-The reduced
Round Trip because
parameter Time (RTT)
defines ofthe DTX. This isofpart
optimization
number subframesof CQI Reporting
after an HS-SCCH reductionreceptionsubfeature. or after
-the
This Battery
first consumption
slot
used optimization
for reception,
streaming when during
2 ms which
TTI is the
used UE onis required
E-DCH. to monitor
The
This parameter
for streaming consecutive 2 ms TTI E-DCHis used TTIs without
onpart
E-DCH. an E-DCH
the HS-SCCHs
transmission, in
after the
whichUE's theHS-SCCH
UE should setimmediately
continuously. move Thisfromis UE ofDTX
Discontinuous
The
DL RNC delivers
parameter
Reception the parameter
defines
(DL DRX) the lengthvalue
subfeature. of MAC to the DTX BTSCyclewhich takes care This
in subframes. of theisCycle 1 to
a pattern
UE
Note! DTX
optimization.
of time CQI Cycle 2.
reporting
instances This is
cycles
whereE-DCH part of
values
the start DPCCH
bigger Gating
of the uplink than (UL
10ms DTX)
are notsubfeature.
recommended
The
Note! parameter
This defines
parameter value must inactivity
be an time inE-DCH
integer TTIs after
divisor
transmission
or awhich
multiple theafter
ofUE
inactivity
thecan
is
start E-
parameter
allowed.
This
DCH This
parameter
is usedof
only Discontinuous
for streaming
at given times. UL
when
This Reception
2 ms TTI (MAC
is
is part Threshold used DTX)
of Discontinuous on subfeature.
E-DCH.UL Reception
This
The
This parameter
S2msUEDTXCycle2
parameter
parameter defines also
is used defines
value.
the UL theDPCCH
for streaming valuewhenof
burstInactivity
2 length
ms TTIinissubframes
used on for E-DCH.
UEwhenGrantUEMonitoring.
DTX
(MAC
Cycle 1DTX)
is subfeature.
This
The parameter
parameter is used
defines for
the streaming
UL DPCCH when 2
burst2 lengthms TTI is used on E-DCH.
This
Note! parameter
This is used
parameter for streaming
value must be an wheninteger ms TTIinissubframes
multiple used
of the on when UE DTX
E-DCH.
S2msUEDTXCycle1
Cycle
This
The 2 is
parameter
parameter applied. is
is This
used is
for part of
streaming DPCCH when Gating
2 ms (UL
TTI DTX)
is used subfeature.
on E-DCH.
This
parameter parameter value. is used
used to fordefine
streaming the HS-SCCH
when 2 msreception TTI is used pattern (UE DRX Cycle)
on E-DCH.
length
The in subframes.
parameter defines This the parameter
UL DPCCH defines a
burst2 pattern multiple or
length a divisor
inon which for
subframes is used
UE DTXwith
This
the parameterUE
parameter is used
DTX for streaming
Cycle 1 to when
define UE ms TTI
DRX Cycleis used
value E-DCH.
that is used. If the
Cycle
The 1. This is defines
valueparameter
parameter valueburst minuspattern lengthtoincalculate
1 is used subframes for UE
a new DTX
value,
Cycle
and so 2. This
on. is
This part
is
parameterofdetermines partof DPCCH
of Gating
Discontinuous
in slots (ULDL DTX)
Receptionsubfeature.
Cycle" associated
signaled by the BTSwith is
the
used. UE DTX
This minimum isthis
used the
parameter CPCand
for streaming Optimization
the
when "Max 2 msobjective
UETTI for UEs
DTXis Cycle"
used on supporting
signaled
E-DCH.by the andBTSusingis
Continuous
used.
This parameter
for streaming subframes 2 ms TTI afterisan usedHS-DSCH
on E-DCH. reception during
which the
defines have
the higher
CQI priority
feedback than
cycle the DTX pattern. This is part of CQIis
The
This
parameterreductionis objective
used can be:
for streaming
subfeature. when 2 msforTTI HSDPA
is used when the CQI
on E-DCH. reporting
Note!
not
-The When
reduced
Round changing
Trip because
Time (RTT) the
ofthe value
DTX. of this
This isofpart
of CQI Reporting value of S2msUEDTXCycle2
should
-the Battery
Note! beconsumption
This checked
parameter whether this isbe
optimization.
value must ananinteger
integer multiple
multiple ofofthis
the parameter
S2msUEDTXCycle1value.
This
The first slot
parameter
used
defines when reception,
10 ms TTI during
is used which
on E-DCH the UE
with is required
CS voice to monitor
over HSPA
Note!
This
parameter Changing
used ofthe
when number
this 10 msofTTI
parameter consecutive
changes
iscontinuously.
used on E-DCH
also
E-DCH TTIs
the value
with without
of voice
CS anover
E-DCH HSPA
the HS-SCCHs
feature.
transmission, in
after the
UE should set immediately move This is
from part
UE of Discontinuous
DTX Cycle 1 to
S2msUEDRXCycle
feature.
The RNC delivers
parameter parameter
the parameter
defines the because
lengthvalue of MAC it
to the is
DTXa multiplier
BTSCyclewhich or a divisor
takes care This
in subframes. of this parameter.
of theis a pattern
DL
UE Reception
DTX Cycle (DL
2. DRX)
This is subfeature.
Note: When
optimization.
of time changing
instances the
whereE-DCH value
the start of this parameter,
of the uplink E-DCH check that
transmission the value of
The
Note! parameter
S2msMACDTXCycle
CQI defines
reporting isDiscontinuous
cycles an integer
values inactivity
multiple
bigger time of in
than thisTTIs
10ms after
parameter
are notwhich
value. theafter
recommended UE caninactivity is
start E-
allowed.
This
DCH This
parameter
is usedof
only when
at given 10 ms
times. UL
TTIThis isReception
used
islengthon (MAC
E-DCH
part Threshold DTX)
with
ofinDiscontinuous subfeature.
CS voice
UL over
Reception HSPA
This
The
This parameter
parameter
parameter defines also
is used defines
the
when UL the
10 value
DPCCH
ms TTI of
burstInactivity
is used on E-DCH subframes
withfor CSUEwhenGrant
voice Monitoring.
UEoverDTXHSPA
feature.
(MAC DTX) subfeature.
Cycle
feature.
This
The 1 is
parameter
parameter applied. is This
used is
whenpart 10of DPCCH
ms TTI is Gating
used (UL
on E-DCHDTX) subfeature.
with CS voice over
DTXHSPA
This
feature. parameter defines is used the when UL10 DPCCH
ms TTIburst is used length in subframes
on E-DCH with CS when
voice UEover HSPA
Cycle
This
feature.
The 2 is applied.
parameter
parameter is
is Thisto
used
used is define
whenpart10 of the
DPCCH
ms TTI
HS-SCCH is Gating
used (UL
on E-DCH
reception DTX) subfeature.
with
pattern CS(UE voice
DRX over HSPA
Cycle)
This
Note! parameter is used when 10 ms TTI is used
This parameter value must be an integer multiple of the V10msUEDTXCycle1 on E-DCH with CS voice over HSPA
feature.
length
feature. in subframes. This parameter defines a multiple or a divisor which is used with
parameter
The
This parameter
parameter value. defines
is used the
when UL10 DPCCH
ms TTIburstisUE pattern
used onCyclelength with
E-DCH in subframes
CS isvoice for UEHSPA
over DTX
the
Cycle parameter UE
1. This is defines DTX
part of DPCCH Cycle 1 to define
Gating (UL DRX
DTX) subfeature. value that used. If the
feature.
The parameter
value is not allowed, thethe UL DPCCH
a new DTX
value,
Cycle
and so 2. This
on. is
This part
is
of Gating
Discontinuous
in slots (ULDL DTX)
Cycle" associated
the
used. UE DTX
This minimum isthis
used the
parameter
when CPC 10and Optimization
ms the
TTI "Maxis used objective
UEon DTX
E-DCH for UEs
Cycle"with supporting
signaled
CS voice andBTS
by over
the using
HSPA is
Continuous
used.
feature.
This parameter
parameter defines is used the when number
10 msofTTI subframes
is used on after
E-DCH an HS-DSCH
with CS voice reception
over during
HSPA
which
feature. the
defines have
the higher
CQI priority
feedback than the DTX pattern. This is part of CQIis
The
This Optimization
Reportingparameterreductionis objective
used when
subfeature. can10be: ms TTI iscycle usedfor onHSDPA
E-DCH when with CS thevoice
CQI reporting
over HSPA
not
The reduced
-feature.
Round Trip because
parameter Time (RTT)
defines ofthe DTX. This isofpart
optimization,
number subframesof CQI Reporting
after an HS-SCCH reductionreceptionsubfeature. or after
Note!
-the
BatteryWhen changing the
consumption value of this parameter, the value of V10msUEDTXCycle2
optimization.
This
The first slot
parameter
used
defines when
the 2reception,
number ms TTI is
of integerduring
used
consecutive which
on E-DCH
E-DCH the UE
with
TTIs is
CSrequired
voice
without to
over
an monitor
HSPA
E-DCH
should
This
Note! be checked
parameter
This is used
parameter whether when
value this
2 ms
must isbean
TTI isinteger
anset used multiple
on E-DCH
multiple ofofthis
withparameter
theis CS voice value.
V10msUEDTXCycle1over HSPA
the HS-SCCHs
feature.
transmission, in
after the
UE should continuously.
immediately move This from part
UE ofDTX
Discontinuous
Cycle 1 to
Note!
feature.
The RNCChanging
parameter
parameter delivers
value. value
the
defines of this
parameter
the parameter
value to changes
the BTS also
which the value
takes
length of MAC DTX Cycle in subframes. This is a pattern of
care of the
DL
UE Reception
DTX Cycle (DL
2. DRX)
This is subfeature.
V10msUEDRXCycle
optimization.
of time instances parameter
whereE-DCH the start because
of the uplink it is a multiplier or a divisor of this
The parameter
parameter.
Note! CQI defines
reporting cycles values inactivity
bigger time
than inE-DCH
TTIs are
10ms
transmission
after notwhich theafter
recommended UE caninactivity is
start E-
allowed.
This
DCH This
parameter
is usedof
only Discontinuous
when
at given 2 ms TTI
times. ULis
This Reception
used on
islength
part (MAC
E-DCH DTX)
with
ofinDiscontinuous CS subfeature.
voice
UL over
ReceptionHSPA
This
Note:
Note!
The
This parameter
Whenparameter
This
parameter
parameter also
changing
defines
is used defines
the
value
the
when UL the
value
must value
of
2DPCCH
ms be anof
this
TTI is Inactivity
parameter,
integer
burst used Threshold
check
divisor
on E-DCH or that
awith for
the
multiple
subframes CS UE
valueGrant
of
when
voice of
the
UE Monitoring.
parameter
over DTXHSPA
feature.
(MAC DTX) subfeature.
V10msMACDTXCycle
V2msUEDTXCycle2
Cycle
feature.
This 1 is
parameterapplied. is used is
value.
This isan
when integer
part 2 ofms multiple
DPCCH
TTI is used of
Gating this
on (ULparameter
E-DCH DTX) value.
subfeature.
with CS voice over HSPA
The
This parameter
parameter defines is used the when UL2DPCCHms TTI is burst used length in subframes
on E-DCH with CSwhen voiceUE over DTXHSPA
feature.
Cycle
This 2 is
parameterapplied. is This
used is
whenpart 2 ofms DPCCH
TTI is Gating
used on (UL
E-DCH DTX) subfeature.
with CS voice over HSPA
feature.
The
This
Note! parameter
parameter is
is used
used to define
when 2 msthe HS-SCCH
TTI is used
This parameter value must be an integer multiple of the V2msUEDTXCycle1reception
on E-DCH pattern
with CS (UE
voiceDRX over Cycle)
HSPA
feature.
length
feature. in subframes. This parameter defines a multiple or a divisor which is used with
parameter
The parameter
This value.
parameterUE defines
is used the
when UL2DPCCHms burst
TTI is used pattern
on E-DCH lengthwith in subframes
CS voice for UE
over DTX
HSPA
the
Cycleparameter
1. This is defines DTX
part of DPCCH Cycle 1 to define
Gating (UL UE DRX
DTX) Cycle
subfeature. value that is used. If the
feature.
The
valueparameter
a new DTX
value,
Cycle
and so 2. This
on. is
This part
is
of Gating
Discontinuous
in slots (ULDL DTX)
Cycle" associated
the
used.UE
This minimumDTX Cycle
parameterofis 2.
determinesThis is part
whether of DPCCH RNC Gating (UL DTX) subfeature.
The
This parameter this
used parameter
when 2 msandTTI theis"Max usedprimarily
UEon DTX
E-DCH activates
Cycle" DC-HSDPA
withsignaled
CS voicebyover theor MIMO
BTS
HSPA is
used.
feature.
This
This parameter
parameter defines is used when the power2 msoffsetTTI isbetween
used on the E-DCH initialwith
DPCCH CS voicepower overlevel on
HSPA
secondary
feature.
This parameter UL
parameter is frequency
defines when
the low it is activated and the current DPCCH power level on
This
primary UL frequency. used when 2 throughput
ms TTI is used timeon to E-DCH
the trigger withtimer for theover
CS voice throug
HSPA
feature.
Note! When changing the value of this parameter, the value of V2msUEDTXCycle2
0 dB means
should that thewhether
be checked UE will this use is theancurrent
integer DPCCH
multiple power
ofofthis level on primary UL
Note!
frequencyThis parameter
as thevalueinitialvalue
DPCCH mustpowerbe an integer
level multiple
on secondary theparameter
UL V2msUEDTXCycle1
frequency
value.
when it is
Note! Changing
parameterUsing of this parameter changes
value.the same power level may lead to a power spike. also the value of
activated.
V2msUEDRXCycle parameter because it is a multiplier or a divisor of this parameter.
Note: When changing the value of this parameter, check that the value of
3 dB means that the UE
V2msMACDTXCycle is an willinteger
use half of the of
multiple current DPCCH power
this parameter value.level on primary
UL frequency as the initial DPCCH power level on secondary UL frequency when it is
This parameter determines the maximum number of HARQ retransmissions for the E-
DCH MAC-d flow
This parameter of the SRBs
determines thewhen
maximumthe E-TTI
number is 10ofms.
HARQ retransmissions for SRBs
Information
on E-DCH is
TTI signaled
2 ms. to UE using RRC: E-DCH MAC-d flow maximum number of
This parameter determines
retransmissions information the maximum
element and number
to BTS of HARQ
using NBAP: retransmissions
Maximum for of
Number
The information
streaming traffic is signaled
class on to the UE using RRC: E-DCH MAC-d
E-DCH. flow maximum
Retransmissions
This
numberparameter for E-DCH
of retransmissions information
determines information
the maximum element.
number
element andof to
HARQ
theflowretransmissions
BTS using NBAP: for E-
Information
DCH. is signalled to UE using RRC: E-DCH MAC-d maximum number of
Maximum
This Number
parameter defines
retransmissions of Retransmissions
informationthe traffic
elementclassesfor
andtheE-DCH
(TC)
to BTS and information
traffic
using element.
handling
NBAP: Maximum priorities (THP of
Number
Information is signalled to the UE using RRC: E-DCH MAC-d flow maximum
Retransmissions
The parameter
number for E-DCH
defines, in radio
of retransmissions information
information element.
frames,element
how long andthetoDTX/DRX
the BTS using is disabled after a
the NBAP:
reconfiguration.
Maximum Number Thisof parameter is
Retransmissions applied
for to procedures
E-DCH for
information
The parameter defines, in radio frames, how long the DTX/DRX is disabled after awhich
element. the propagation
delay cannot be This
reconfiguration. givenparameter
by the RNC to the BTS
is for
applied (for example
to procedures for HHO).
which the propagation
This parameter defines the factor calculating the E-DCH maximum bit rate from
delay
the can
maximumbe given
uplink by the
user RNC
bit to
rate the
of theBTS
RAB. (for
Theexample,
parameter state transitions).
also has a special value
This parameter defines the E-DCH maximum bitrate in relation to RAB parameter UL/D
which deactivates the use of the maximum uplink user bit rate of the RAB for this
This parameter
purpose. In this defines
case, the theE-DCH
E-DCHmaximum
maximumbitbitrate
rate isinnot
relation to RAB
restricted parameter
based on the UL/D
uplink maximum bit rate of the RAB.
This parameter defines the E-DCH maximum bitrate in relation to RAB parameter UL/D
This parameter determines the value for the Happy bit delay condition information
element. The information
This parameter element
defines whether the is peak
signalled
rate to
of the
MAC-dUE using thepeak
flow, the RRCrate
protocol.
of NRT The
UE
RB utilises
mapped information for
to HS-DSCH, and setting the
the peak E-DCH related
rateduring
of UL which happy
return the bit. The
the HS-DSCH happy
channel limited bit is
to RAB
The parameter
signalled to the determines
BTSbitinrate a period
E-DPCCH. of time allocation is
attribute
denied maximum
after successful received
channel type from RANAP
switching fromor not. Only
HS-DSCH peak
to rates
DCH 0/0defined
kbps for
due
This parameter
MAC-d flow in defines
case the Nominal
Interactive Bit Rate used
and Background in downlink
traffic classes forarethose NRT
affected byRABs
this that
to handover reasons.
parameter.
This parameter
When DCH 0/0 defines
kbps has the Nominal
been allocatedBit Rate
to theused
UE in uplink
due forintra-frequency,
to any those NRT RABs that ar
inter-
frequency
This or
parameter inter-RAT handover
defines the Nominal reasons,
Bit RateHS-DSCH transport channel is not allowed
If
tolimitation is active,
be allocated duringthe
theHSDPA
guard timeDL peak rateused
period. maximumin downlink
cannotforbethose
higherNRT
than RABs
the that
RAB
This maximum.concerns
parameter
The restriction defines thetheNominal
particular BitUERate
andused in uplink for
it is effective those
in all NRT under
the cells RABs that ar
RNC. The restriction
This parameter is effective
defines the Nominal for theBit UE
Ratein used
the CELL_DCH
in downlinkand CELL_FACH
for those NRT RABs that
If limitation
states. Timeris is
active, the HSDPA
not applied if UE UL return channel
is transferred peak
directly to rate is also limitedstate
the CELL_FACH to the due
This parameter
RAB maximum. defines
This the Nominal
means that if BitRAB
the Ratemaximum
used in uplink
is for than
lower thosetheNRT RABs
initial UL that ar
to reporting event 1A when HSDPAMobility is disabled
return channel rate,
This parameter UL return
defines channel
the Nominal Bitallocation
Rate useddoes not succeed
in downlink and therefore
for those NRT RABs that
HSDPA cannot be used.
This parameter defines the Nominal Bit Rate used in uplink for those NRT RABs that ar
If limitation
This parameteris notdefines
active,the
theNominal
RAB maximum Bit Ratehas used noineffect on the
downlink forHSDPA peakRABs
those NRT rates.that
This parameter defines the Nominal Bit Rate used in downlink for those NRT RABs that
This parameter defines the DSCP code values for PDCP priority high queue in case
of In-Bearer
This parameter Application Optimization
defines the DSCP code feature.
valuesThis parameter
for PDCP indicates
priority DSCPincodes
high queue case
values
of from
In-Bearer 0 to 31 assigned
Application to the
Optimization High PDCP
feature. priority
This Queue.
parameter indicates DSCP codes
Weight
In for
casefrom the high PDCP
of In-Bearer Priority Queue in case ofare
In-Bearer Application
values
Optimization 32 to 63Application
feature. assigned
PDCP toOptimization
the High
scheduling follows
there
PDCP priority
the
two
weight
PDCP
Queue.
assigned
Queues defined
to a configured.
PDCP
and
In with this
case queue parameter
of In-Bearer the High
Application PDCP priority
Optimization Queue DSCP codes
there are two PDCP Queues are defined
priority
Setting with the ratio (WFQ) based on bytes.
and withDSCPs true theythe
this parameter go High
to high queue
PDCP and setting
priority Queue DSCPs to false
DSCP codes they
are go to low
configured.
queue.
Setting DSCPs true they go to high queue and setting DSCPs to false they go to low
queue.
The parameter defines how many inactive NRT users are targeted in RT-over-NRT
procedure.
The parameter Targeting defines more
the thanfactorone for inactive
maximum user numberdecreases of HSPA the users
probability whenthat RT-
over-NRT
preventive is needed
overload again.
control is started by releasing inactive users MAC-d
This parameter defines the Initial Scheduling Priority Indicator to be usedflows for the and PS
moving
NRT HSPA them or from
HSDPA Cell_DCH
RAB state.
incase of Application Aware RAN feature. The Initial
This parameter defines the low throughput time necessary to trigger the timer of the
Scheduling Priority Indicator for PS NRT HSPA/HSDPA RAB is set according to this
The
This
parameter parameter
parameter whenis applied
defines
Qos the
Aware forlow following
utilisation
Scheduling HSPA timeuser
feature amount
toistrigger
disabled the related maximum
timer Application
while of the throughput values:
Aware
-RAN Maximum number of HSDPA MAC-d flows
is enabled.determines the temporary CQI feedback cycle for the Mass Event (Parameter:
The parameter
MaxNumberHSDSCHMACdFlows)
Handler.
-If Maximum
The Qos Awarenumber
parameter HSPA of HSDPA
determines
Scheduling the usersHSUPA
feature (Parameter:
user
is enabled increment MaxNumberHSDPAUsers)
for the Mass
simultaneously withEvent Handler.
Application
-Aware
The Maximum
HSUPARANCQI number
user
feature of
incrementHSDPA
thentothe MAC-d
determines
Initial flows
Schedulinghow infastthe MAC-hs/ehs
the
Priority original
Indicator specific
maximum
isifchoosen BTS
number of
according
This
Temporary parameter is used
feedback define
cycle istheused minimum
for a user BTS notHW using allocation
CPC for
theNRT number RB with
of
scheduler
HSUPA
to the principles (Parameter:
users in the
defined cell MaxNumbHSDSCHMACdFS)
is restored
by E-DCH.
Qos Aware after the
HSPA high load
Scheduling state ceases.
feature ie based onUE thewith
streaming
HSDPA RB attains
users allocated on BTS allocates the HW resources thatfor one
-This
TC/THP/ARP
parameter
Maximum number defines oforHSDPA
exceeds
periodicity usersthe for threshold
inScheduling
the MAC-hs/ehs defined
Info by
(SI) the
in case
specific parameter
BTS the
schedulerWCEL-
BTS type i
streaming
MEHHSDPAUserNbrCQI. RB combination
+ NRT RBs based via RNPS-QosPriorityMapping
on the maximum set of E-DPDCH parameter. which defines the
(Parameter:
The
This Mass
parameter Event MaxNumbHSDPAUsersS)
Handler
defines uses
the power the temporary
offsetfactor) maximum
for Scheduling number
Info give(SI). to the UE. RNC to
of HSUPA users
maximum bit rate (minimum spreading that BTS can
-Values
limit Maximum
E-DCH "5"(SPI number
allocations
5) and of E-DCH
"6"in the
(SPI allocations
cell
6) during
define the in
the the
high
Initial cellload
SPI (Parameter:
state.
to be either When the
5foror 6usage
forlowtheof NRT
the
calculates
The
Parameter longer the
themaximum
defines CQI feedback
the set ofvalue,
time-to-trigger E-DPDCH the less
values taking ULthe
of into account
interference
HS-DSCH GBR
caused
MAC-d by streaming
flow the periodicaland
MaxNumberEDCHCell)
maximum
bearers number
when the of HSUPA
RAN1262 users
Qos ceases,
feature is the
disabled original to maximum
get better number
differentiation of HSUPA
when
NBR
CQI
utilisation or this
reporting parameter
of the
measurement HSDPAfor NRTs.
and UE. E-DCH If NBR
TheMAC-d is
longer defined
CQI
flow for
feedback
low the
throughputspecific
cycle SPI
maymany (signalling
affectHSUPA
measurement
-Parameter
users
doing
priority
Maximumis
SPI number
restored
defines
promotion
indicator)
of
the
where
E-DCH
gradually. the The
HS-DSCH
/scheduling
demotions NRT
allocations
value
and
for
is of
the the
E-DCH
mapped,
in the
data BTS
parameter
sliding
itbetween
is used.
local
averaging
bearerscell
Ifdefines
NBR is.how
group
window
not
(Parameter:
defined, sizesthis offor
thethe
negatively
identified
MaxNumberEDCHLCG)
users can be to HSDPA
Smartphone
added per second instead of performance.
the MACdflowutilTimetoTrigger and
throughput
parameter
This parameter ismeasurements
used. defines the for lengththeafter the high
identified
of the transmission
load state ceases.
Smartphone gapinsteadpatternoffor theWCDMA inter-
EDCHMACdFlowThroughputTimetoTrigger
-MACdflowthroughputAveWin
Maximum number of E-DCH allocations
and in parameters.
the BTS (Parameter:
EDCHMACdFlowThroughputAveWin parameters.
The
Special function
HSUPAXUsersEnabled
This valueis(0)
parameter switched
defines
meansthe ) on/off
that length by the of the WCEL-MassEventHandler
transmission gap pattern parameter.
for LTE carrier
This is minimum maximum bitrestoration
rate for thehappens NRT RB.immediately. Note that usually The value
user 1can restores
get
frequency
the original measurement
maximum numberin case of of
HSUPADCH/DCH, users DCH/
slowly, HSDPA,
the value HSPA10 compressed
restores
The
bigger throughput
This parameter UL bit rates measurement
defines
for the theNRT lengthmeasures the
of the spreading
because number
transmission of
factor bits
gap(Maximum transmitted
pattern forset WCDMA byof E-theinter-
MAC-d
The
mode
original parameter
withvaluea double issliding
fast. applied
Theframe fast for
gap.
or the following capacity feature related maximum values
entity
DPDCHs)
This
during
parameter
the
is rounded defines downthe to immediate
measurement
lengthlower of
window
spreading
the
restoration
transmission factor isand
defined seen
by
gap
this
bigger as
pattern
oscillation
parameter.
bitrate.
for WCDMA Alsobetween
Value 0
inter-
(if
low
means maximum
and high
that theuser
maximum
MAC-damount flow parameters
number of
throughput users has if not
load
measurement triggered
varies in
is preventive
the
not cell.
activated. over load control
puncturing
frequency enables biggerinbit
measurement rate.
earlier):
This parameter defines the case bit rate of threshold
HSPA compressed for the maximum mode with uplinka single
user bit framerategap.of
The
-the parameter
HSDPA
TemporaryRAB (HSDPAenabled)
whenmaximum is
the used in
number
maximum case of of
total PS
HSUPA
uplinkNRT userson
symbol HSPA
is and
defined
rate of PS
by
E-DPDCH(s)NRT
the on
WCEL- HSPA
is together
restricted to
This
with
-1920 HSDPAparameter
AMR.
MEHMaxHSUPAUsers 48(corresponds
Users defines
Per Cell the bit
parameter. rate threshold for the maximum uplink user bit rate of
(HSDPA48UsersEnabled)
kbps to the spreading factor set rate2*SF4). The maximum uplink to
-the
This
user
RAB
HSDPAbit
when
parameter64
rate Users
of
the
the
maximum
Per
defines
RAB Cell
the
must
total uplink
(HSDPA64UsersEnabled)
bitbe ratebelow threshold symbol
than orforequal
the of E-DPDCH(s)
maximum
to the uplink user
threshold
is restricted
but bit ratethe
above of
5760
Minimum
-theHSPA
RABkbps 72when(corresponds
value
Users 2,Per
the defines
Cell
maximum to(HSPA72UsersPerCell)
the
that spreading
there
total is one
uplink factor
symbol normal set
rate 2*SF2).
frameof The maximum
between
E-DPDCH(s) framesis uplink to
with
restricted
threshold
The
user parameter
bit 128
ratedefined
of the with
determines
RAB the mustThresholdMaxEDPDCHSR960kbps
the be minimum
below than duration or SF4).
equalof HSDPAto the parameter
prevention
threshold but until
forlimits the
the Voice
above the
compressed
-960
HSPAkbps
restriction mode
is Users
(corresponds
set. The gap.
Per This
Cell
to
maximum the settingtotal makes
(HSPA128UsersPerCell).
spreading uplink factor measurement
symbol rateThe 3840 faster
maximum kbps butisuplink
also
allowed useruserbit
Call
plane
The Prioritisation
thresholdmost.
parameter defined during
with the High Traffic Load.
ThresholdMaxEDPDCHSR3840kbps parameter until the
rate of the RAB
(corresponds
restriction todetermines
is Traffic
set.
must
spreading
The
be below
maximum
the HSDPA
factors than
total2*SF2) user
or equal
uplink
increment
to maximum
if symbol
the the threshold
rate
for uplink
5760
the until
Voice
kbps
the
user Call
bit
is frames
allowed
Prioritisation
restriction
rate of the is
Maximum
The
during
set.
RAB parameter
The High value
parameter
is above theis18, defines
applied
Load.
has
threshold. also
The
also that
a for
HSDPA there
specialthe
The parameter are
HSDPA
user
value 17 normal
user
increment
which
has also frame
amountdefines
deactivates
a special between
limitshowthereturned
value fast
use the
which of by with
BTS.
original
the
This
The parameter
shorter
(corresponds theto defines
value
spreading ofthe weight
thefactors
parameter, valuethe
2*SF2 for
+cell HSDPA
shorter
2*SF4) Dynamic
ifduration
the maximumthe Resource
HSDPA uplink Allocation
prevention
user is
bit rate
compressed
maximum
deactivates number
uplink
themode use gap.
of
user ofHSDPA
bit
theThis
rate setting
users
of
maximum the makes
in
RABthe for
uplink measurement
is PS
restored
limiting
user bit of
rate the of slower
after
maximum
the HSDPA
RAB but itprevention
total
for limits
uplink
limiting user
of the
and
of HSUPA.
applied.
theparameter
This RAB The
Correspondingly,
istoabove weight
defines thethe value
the
threshold. is
longer
weight valueapplied value to
The parameter the
of
for HSDPA the NRT
parameter,
has radio the
also a special
Dynamic access
longer
Resource bearer
value duration that
which
Allocation has
the
plane
ceases.
symbol
maximum onlyrate very
total 960little.
uplink kbps.symbol rate to 1920 kbps.
a
andbackground
HSDPA
deactivates
HSUPA. prevention
theThetraffic
use class.
isof
weight applied.
thevalueWeight
maximum is values
applied uplink are
to user
the usedPSbit for
ratecalculating
NRT of
radiothe access
RAB the forpriority
limitingthatofofthethe
This parameter
NRT DCH traffic defines
type whenthe weight
DCH/DCH value is for HSDPAtoDynamic
allocated the user. Resource Allocationhas
bearer
maximum
the
The interactive
Voice Call total uplink
traffic symbol
classvalue
Prioritisation and rate
duringtrafficto 3840
Highhandling kbps.
Traffic priority
LoadNRT (THP)
uses the1.accessWeightbearer
temporary valuesmaximum are has
and HSUPA.
Special The weight is applied to the isPS radio that
This
used
number
the forvalue
parameter
calculating
of
interactive HSDPA 0 defines
means
traffic the
users
class
that
the
priority
toandAMR
weight
limit prioritisation
traffic
value
ofHS-DSCH
the NRT for
handling
HSDPA
DCH
allocations applied
traffic
priority in without
Dynamic
type
(THP) thewhen cell
2.
HSDPA
Resource
DCH/DCH
during
Weight
prevention.
Allocation
high
values is
load.
are has
and
This HSUPA.
allocated
When parameterto The
the
thecalculating
usage weight
user.
of
definesthe value
maximum
the weight is applied
number
value toofthe
for HSDPA
HSDPA PS NRT users
Dynamic radio ceases,access
Resource thebeareroriginal that
Allocation
used
The
the for
function
interactive istraffic
switched the priority
on/off of
by thethe NRT DCH
WCEL-VoiceCallPriority traffic type when DCH/DCH
parameter. is
maximum
and number of class
HSDPA andusers traffic ishandling
restored priority
gradually. (THP) The3.value The interactive
of bearer
the parameter class
This HSUPA.
allocated
THP3 parameterto
includes
The
the also
weight
user.
defines lower thevalueweight
order
is
of
applied
value for
priorities
to theHSDPA
and
PS NRT
no Dynamic
priority
radio
value
access
Resource
if it is
that
Allocation
received
has
from
defines
the how many
background HSDPA
traffic class. usersWeight canvaluesbe added are per second
used for after HSDPA
calculating the prevention
priority of the
and
the HSUPA.
ThisRANAP.
parameter The
Weight weight
defines values thevalue
are
weight is
usedapplied to the
for E-DCH)
value calculating
for HSDPA PS NRT the
Dynamic radio Resource
priority access
of the bearer
NRT DCH thattraffic
Allocation has
ceases.
HSPA traffic type when HS-DSCH (and is allocated to the user.
the
type
and interactive
when DCH/DCH
HSUPA. The traffic class
weight and is
is allocated
value traffic
to the
applied handling
user.
to the priority
PS NRT (THP)radio1.ResourceWeightbearer
access valuesthat are has
This
used parameter
for calculating defines the the
priorityweight of value
the HSPA for HSDPA
traffic typeDynamicwhen HS-DSCH Allocation
(and E-DCH)
the interactive
Special
and HSUPA. valueThe traffic
(0) means classthat andrestoration
traffic handlingto thepriority
happens (THP)
PSimmediately. radio2.access Weight
The value values are has
1 restores
is allocated
used for to the weight
calculating user.
the
value
priority
is
of
applied
the HSPA traffic
NRT
type when HS-DSCH
bearer
(and
that
E-DCH)
the original maximum number of HSDPA users
the interactive traffic class and traffic handling priority (THP) 3. The interactive class slowly, the value 10 restores the
is allocated
original
This
THP3 value
parameter
also to fast.
includesthe user.
The
defines fast
a lower or
the coverage
orderimmediate of SRBs
of priorities restoration on HSPA
and no ispriority
seen
within as oscillation
the
value HSPA between
serving
if it is received cell
low
from and
the high
RANAP. maximum Weight number
values of
are users
used if load
for varies
calculating in the
the cell.
priority of the HSPA
This parameter defines the coverage of the E-DCH TTI 2 ms within the HSPA serving
traffic type when HS-DSCH (and E-DCH) is allocated to the user.
Temporary
This parameter maximum defines number
the coverage of HSDPA area usersof the is E-DCH
defined TTI by the 2msWCEL- within the HSPA servin
VCPMaxHSDPAUsers parameter.
This parameter defines the coverage area of the SRBs on HS-DSCH within the HSPA se
This
Usageparameter determines
of the function the timebythat
is controlled themust be waited after an E-DCH
WCEL-VoiceCallPriority to DCH
parameter.
channel type switching before a DCH to E-DCH channel type switching can
The parameter determines the time period for calculation of the maximum number be done.
of r
Parameter determines the absolute CPICH Ec/No threshold for the serving HS-DSCH ce
The parameter determines the maximum number of repetitive serving HS-DSCH cell cha
Parameter enables/disables diversity handover of the stand-alone signalling link
(RRC connection)
The parameter after successful
determines the maximumRRC connection setup forbetween
allowed difference the HSDPA-capable
the best cell
UE.
and Parameter
the SRB on is ignored
HS-DSCH in the
cell. case
The HSDPA
window Serving
is relativecell
to change
the best and
cell HSDPA
in
This parameter
Soft/softer defines
handover for the maximum
associated buffering
DPCH time of the voice frames
features. inthe active
RNC when C
set. If the SRB on HS-DSCH cell change is outside the window, SRBs on HS-DSCH
Thischange
cell parameter definesisthe
procedure maximum
initiated. buffering
If the SRBs on time of the voice
HS-DSCH frames in
cell change RNC
fails, it when CS
triggers SRBs on HS-DSCH transport channel type switch to DCH.
This parameter defines the Max CS delay value for the maximum buffering time of The measured
quantity
the is CPICH
CS voice frames Ec/No,
in UE. which
When is the
received periodically
CS speech from theover
is transferred UE. HSPA, the
HSDPA scheduling and retransmissions can generate a variable delay of the voice
frames. Delay variation is removed before replaying the speech on the UE by storing
the received voice frames in the dejitter buffer for the period of maximum length
defined with this parameter. Maximum jitter is proportional to the maximum number of
the HSDPA retransmissions and the MAC-hs scheduling delay. The former is
controlled with the management parameter "HSDPA re-ordering release timer T1 for
This parameter determines the maximum allowed measured CPICH Ec/No difference
between
This parameterthe best cell of thethe
determines active set and
reporting the potential
period new HS-DSCH
of the CPICH cell. If the
Ec/No measurement
difference
that is bigger than
is used as adetermines this window,
criterion forthe
starting the channel
the must
DCH be type switch
to HS-DSCH from
switch. DCH to HS-DSCH
This
is notparameter
initiated. time that waited after an HS-DSCH to DCH
channel type switching before an DCH to HS-DSCH channel type switching can be
Note
done.that this parameter also defines the period that is used to retry the channel type
switch if it did
Parameter not succeed
allows operatorsastowell as whether
adjust MAC-es the conditions
reordering for wait
buffer the switch are still
time. Online
fulfilled.
modifications affect new connections only.
The parameter allows operators to adjust MAC-es reordering buffer wait time for NRT
The parameter allows operators to adjust MAC-es reordering buffer wait time for NR
This parameter allows you to adjust the MAC-es reordering buffer wait time between
the
Thisvalues 40ms-320ms.
parameter Onlinefor
is the identifier modifications affect new connections only.
the RNHSPAobject.
The parameter can also be used to restrict the delay for RT services due to the MAC-
This timer defines the time in case of resource shortage/congestion where DCH/DCH
es re-ordering.
resource allocation reattempts should succeed.
parameter defines the origintimer

The UPResAllocInCellDCHWait of theis last
set configuration action
if the dedicated affecting
channel the object
allocation tried
for Packet Switched data fails, because of the resource congestion.
Timer is used over the whole resource allocation scenario (radio resources, DMCU-
resources, radio link setup (BTS HW-resources) and AAL2-setup (transmission
resources)), and thus the timer may expire in a different phase of the ongoing
allocation procedure or outside of the scenario (RNC is waiting the next UL/DL
capacity request from UE/IUG).
If the timer expires the packet scheduler makes a decision for the UE state transition
to Cell_FACH or Cell/URA_PCH or tot decides that the UE will stay in Cell_DCH
state.
The value 255 means that the adjustable user plane resource allocation retry timer is
not in use and switching the UE to Cell_FACH (or Cell/URA_PCH) state is not used.
In case of CS + PS- multiservice connection, the UE is kept in Cell_DCH state as

long as the UL/DL capacity request is being received.

0...10 s, step 1 s 3s 3s
Bit 0: Background, Bit 1: Interactive THP= 127 (01111111b) 127 (01111111b)
Bit 0: Conversational Call, Bit 1: 4065 (0000111111100001b) 4065 (0000111111100001b)
Streaming Call, Bit 2: Interactive
HSDPA Priority 1 (1), HSDPA Priority 2 (2)Call, Bit HSDPA Priority 1 (1) HSDPA Priority 2 (2)
3: Background Call, Bit 4: Subscribed
0...240 s, step
traffic Call, 1 sEmergency Call, Bit 6:
Bit 5: 30 s 30 s
Inter-RAT cell re-selection,
Bit 0: Background, Bit 7: Inter-
Bit 1: Interactive THP=3 63 63
RAT cell change order, Bit 8:
1...60 s, step 1 s
Registration, Bit 9: Detach, Bit 10: High 5s 5s
Priority Signalling,
0...64000 bps, stepBit 11:bps,
256 LowThePriority
low throu 0 bps 0 bps
Signalling, Bit 12: Call re-establishment,
0...300 s, step 0.2 s 5s 5s
Bit 13: Terminating cause unknown, Bit
128...83968,
14: step 128,Bit
MBMS reception, This
15:parameter
MBMS ptpdoes 0 (no restriction) 0 (no restriction)
RB request,
0...3, step 1 1 1
0...3, step 1 2 2
SF32 (0), SF16 (1) SF32 (0) SF32 (0)
SF8 (0), SF4 (1) SF8 (0) SF8 (0)
10 ms (0), 20 ms (1), 30 ms (2), 40 ms (3) 20 ms (1) 20 ms (1)
10 ms (0), 20 ms (1), 30 ms (2), 40 ms (3) 20 ms (1) 20 ms (1)
1...6, step 1 255 255

0...63, step 1 255 255
0...63, step 1 255 255
0...63, step 1 255 255
0...63, step 1 255 255
0...63, step 1 255 255
1...6, step 1 255 255
0...11, step 1 255 255
0...11, step 1 255 255
0...11, step 1 255 255
0...11, step 1 255 255
0...11, step 1 255 255
0...11, step 1 255 255
0...11, step 1 255 255
0...11, step 1 255 255
0...11, step 1 255 255
0...11, step 1 255 255
0...11, step 1 255 255
0...11, step 1 255 255
1...200, step 1, UEs with ARP 1 are ignored 100 100
10...1000 ms, step 10 ms 300 ms 300 ms
RTT (0), Battery (1) Battery (1) Battery (1)
0 (0), 1 (1), 2 (2), 4 (3), 8 (4), 16 (5), 32 ( 64 (7) 64 (7)
0 (0), 2 (1), 4 (2), 8 (3), 10 (4), 20 (5), 40 10 (4) 10 (4)
0 (0), 1 (1), 2 (2), 4 (3), 8 (4), 16 (5), 32 64 (7) 64 (7)
1 (0), 4 (1), 8 (2), 16 (3), 32 (4), 64 (5), 1 16 (3) 16 (3)
5 (0), 10 (1), 20 (2) 10 (1) 10 (1)
Infinity (0), 1 (1), 2 (2), 4 (3), 8 (4), 16 (5 Infinity (0) Infinity (0)
1 (0), 2 (1), 5 (2) 1 (0) 1 (0)
1 (0), 2 (1), 5 (2) 1 (0) 1 (0)
0.5 (0), 1 (1), 2 (2), 3 (3), 4 (4) 2 (2) 2 (2)
1 (0), 5 (1), 10 (2), 20 (3) 10 (2) 10 (2)
5 (0), 10 (1), 20 (2), 40 (3), 80 (4), 160 (5) 20 (2) 20 (2)
2 (0), 4 (1), 15 (2) 4 (1) 4 (1)
0 (0), 1 (1), 2 (2), 4 (3), 8 (4), 16 (5), 32 ( 64 (7) 64 (7)
0 (0), 2 (1), 4 (2), 8 (3), 10 (4), 20 (5), 40 8 (3) 8 (3)
0 (0), 1 (1), 2 (2), 4 (3), 8 (4), 16 (5), 32 64 (7) 64 (7)
1 (0), 4 (1), 8 (2), 16 (3), 32 (4), 64 (5), 1 64 (5) 64 (5)
1 (0), 4 (1), 5 (2), 8 (3), 10 (4), 16 (5), 20 ( 8 (3) 8 (3)
1 (0), 2 (1), 5 (2) 1 (0) 1 (0)
1 (0), 2 (1), 5 (2) 1 (0) 1 (0)
0.5 (0), 1 (1), 2 (2), 3 (3), 4 (4) 2 (2) 2 (2)
1 (0), 4 (1), 5 (2), 8 (3), 10 (4), 16 (5), 20 ( 8 (3) 8 (3)
4 (0), 5 (1), 8 (2), 10 (3), 16 (4), 20 (5), 3 16 (4) 16 (4)
2 (0), 4 (1), 15 (2) 4 (1) 4 (1)
0 (0), 1 (1), 2 (2), 4 (3), 8 (4), 16 (5), 32 ( 64 (7) 64 (7)
0 (0), 2 (1), 4 (2), 8 (3), 10 (4), 20 (5), 40 10 (4) 10 (4)
0 (0), 1 (1), 2 (2), 4 (3), 8 (4), 16 (5), 32 64 (7) 64 (7)
1 (0), 4 (1), 8 (2), 16 (3), 32 (4), 64 (5), 1 16 (3) 16 (3)
5 (0), 10 (1), 20 (2) 10 (1) 10 (1)
1 (0), 2 (1), 5 (2) 1 (0) 1 (0)
1 (0), 2 (1), 5 (2) 1 (0) 1 (0)
0.5 (0), 1 (1), 2 (2), 3 (3), 4 (4) 2 (2) 2 (2)
1 (0), 5 (1), 10 (2), 20 (3) 10 (2) 10 (2)
5 (0), 10 (1), 20 (2), 40 (3), 80 (4), 160 (5) 20 (2) 20 (2)
2 (0), 4 (1), 15 (2) 4 (1) 4 (1)
0 (0), 1 (1), 2 (2), 4 (3), 8 (4), 16 (5), 32 ( 64 (7) 64 (7)
0 (0), 2 (1), 4 (2), 8 (3), 10 (4), 20 (5), 40 8 (3) 8 (3)
0 (0), 1 (1), 2 (2), 4 (3), 8 (4), 16 (5), 32 64 (7) 64 (7)
1 (0), 4 (1), 8 (2), 16 (3), 32 (4), 64 (5), 1 64 (5) 64 (5)
1 (0), 4 (1), 5 (2), 8 (3), 10 (4), 16 (5), 20 ( 8 (3) 8 (3)
1 (0), 2 (1), 5 (2) 1 (0) 1 (0)
1 (0), 2 (1), 5 (2) 1 (0) 1 (0)
0.5 (0), 1 (1), 2 (2), 3 (3), 4 (4) 2 (2) 2 (2)
1 (0), 4 (1), 5 (2), 8 (3), 10 (4), 16 (5), 20 ( 8 (3) 8 (3)
4 (0), 5 (1), 8 (2), 10 (3), 16 (4), 20 (5), 3 16 (4) 16 (4)
2 (0), 4 (1), 15 (2) 4 (1) 4 (1)
0 (0), 1 (1), 2 (2), 4 (3), 8 (4), 16 (5), 32 ( 32 (6) 32 (6)
0 (0), 2 (1), 4 (2), 8 (3), 10 (4), 20 (5), 40 10 (4) 10 (4)
0 (0), 1 (1), 2 (2), 4 (3), 8 (4), 16 (5), 32 32 (6) 32 (6)
1 (0), 4 (1), 8 (2), 16 (3), 32 (4), 64 (5), 1 8 (2) 8 (2)
5 (0), 10 (1), 20 (2) 10 (1) 10 (1)
Infinity (0), 1 (1), 2 (2), 4 (3), 8 (4), 16 (5 8 (4) 8 (4)
1 (0), 2 (1), 5 (2) 1 (0) 1 (0)
1 (0), 2 (1), 5 (2) 1 (0) 1 (0)
0.5 (0), 1 (1), 2 (2), 3 (3), 4 (4) 1 (1) 1 (1)
1 (0), 5 (1), 10 (2), 20 (3) 10 (2) 10 (2)
5 (0), 10 (1), 20 (2), 40 (3), 80 (4), 160 (5) 20 (2) 20 (2)
2 (0), 4 (1), 15 (2) 4 (1) 4 (1)
0 (0), 1 (1), 2 (2), 4 (3), 8 (4), 16 (5), 32 ( 32 (6) 32 (6)
0 (0), 2 (1), 4 (2), 8 (3), 10 (4), 20 (5), 40 8 (3) 8 (3)
0 (0), 1 (1), 2 (2), 4 (3), 8 (4), 16 (5), 32 32 (6) 32 (6)
1 (0), 4 (1), 8 (2), 16 (3), 32 (4), 64 (5), 1 32 (4) 32 (4)
1 (0), 4 (1), 5 (2), 8 (3), 10 (4), 16 (5), 20 ( 8 (3) 8 (3)
1 (0), 2 (1), 5 (2) 1 (0) 1 (0)
1 (0), 2 (1), 5 (2) 1 (0) 1 (0)
0.5 (0), 1 (1), 2 (2), 3 (3), 4 (4) 1 (1) 1 (1)
1 (0), 4 (1), 5 (2), 8 (3), 10 (4), 16 (5), 20 ( 8 (3) 8 (3)
4 (0), 5 (1), 8 (2), 10 (3), 16 (4), 20 (5), 3 16 (4) 16 (4)
2 (0), 4 (1), 15 (2) 4 (1) 4 (1)
DC-HSDPA preferred (0), MIMO preferred DC-HSDPA preferred (0) DC-HSDPA preferred (0)
0...300 s, step 0.2 s 5s 5s
0...5, step 1 3 3
0...5, step 1 4 4
0...3, step 1 3 3
0...3, step 1 3 3
Bit 0: Background, Bit 1: Interactive THP=3 31 31
0 (0), 1 (1), 2 (2), 4 (3), 8 (4), 16 (5), 32 ( 32 (6) 32 (6)
0 (0), 1 (1), 2 (2), 4 (3), 8 (4), 16 (5), 32 ( 16 (5) 16 (5)
0.1...5, step 0.1, Restriction is not set. (0) 1.5 1.5
0.1...5, step 0.1 1.4 1.4
0.1...5, step 0.1 1.3 1.3
0.1...5, step 0.1 1.8 1.8
2 ms (0), 10 ms (1), 20 ms (2), 50 ms (3), 50 ms (3) 50 ms (3)
No limitation (0), Limitation is active (1) Limitation is active (1) Limitation is active (1)
0...30 s, step 1 s 5s 5s
Bit 0: DSCP0, Bit 1: DSCP1, Bit 2: 0 0
DSCP2, Bit 3: DSCP3,
Bit 0: DSCP32, Bit 4: DSCP4,
Bit 1: DSCP33, Bit 2: Bit 0 0
5: DSCP5,
DSCP34, Bit 6:
Bitstep DSCP6,
3: DSCP35, Bit 7: DSCP7,
Bit 4: DSCP36,
50...100
Bit %, 10 % 50 % 50 %
Bit 8:
5: DSCP8,
DSCP37,BitBit9:6:DSCP9,
DSCP38, BitBit
10:7:
DSCP10, Bit 11: DSCP11, Bit 12:
DSCP39, Bit 8: DSCP40, Bit 9: DSCP41,
DSCP12, Bit 13: DSCP13,
Bit 10: DSCP42, Bit 14: Bit 12:
Bit 11: DSCP43,
DSCP14,
DSCP44, Bit 13: DSCP45, Bit
Bit 15: DSCP15, Bit 16:
14:
DSCP16,
DSCP46, Bit 15: DSCP47, Bit
Bit 17: DSCP17, Bit 18:
16:
DSCP18,
DSCP48, Bit
Bit 19:
17: DSCP19,
DSCP49, BitBit 20:
18:
DSCP20,
DSCP50, Bit
Bit 21:
19: DSCP21,
DSCP51, BitBit 22:
20:
DSCP22,
DSCP52, Bit
Bit 23:
21: DSCP23,
DSCP53, BitBit 24:
22:
1...5, step 1 2 2
0...1, step 0.01 0.9 0.9
SPI 5 (5), SPI 6 (6) SPI 5 (5) SPI 5 (5)
0...300 s, step 0.2 s 5s 5s
0...300 s, step 0.2 s 2s 2s
4 ms (0), 8 ms (1), 10 ms (2), 20 ms (3) 8 ms (1) 8 ms (1)
1...10 users, step 1 users 1 users 1 users
everyMACePDU (0), 4 ms (1), 10 ms (2), 20 200 ms (6) 200 ms (6)
0...20 s, step 0.2 s 0.2 s 0.2 s
0.5...10 s, step 0.5 s 1s 1s
2...18, step 1 4 4
3...12, step 1 5 5
2...18, step 1 4 4
2...18, step 1 5 5
0...16000 kbps, step 64 kbps, Restriction is 1024 kbps 1024 kbps
0...16000 kpbs, step 64 kpbs, Restriction is 2048 kpbs 2048 kpbs
0...16000 kbps, step 64 kbps, Restriction is 512 kbps 512 kbps
1...120 s, step 1 s 10 s 10 s
1...100, step 1, B/G RAB is ignored in prio 15 15
1...100, step 1, I/A THP1 RAB is ignored in 90 90
1...100, step 1, B/G RAB is ignored in prio 25 25
-24...0 dB, step 1 dB -6 dB -6 dB

-24...0 dB, step 1 dB -6 dB -6 dB
50...160 dB, step 1 dB 136 dB 136 dB
-115...-25 dBm, step 1 dBm -103 dBm -103 dBm
0.5...20 s, step 0.5 s, Minimum time need 2s 2s
0...60 s, step 1 s 10 s 10 s
-20...0 dB, step 0.5 dB -5 dB -5 dB
0...16, step 1 4 4
SHO not allowed (0), SHO allowed (1) SHO allowed (1) 0
0...6 dB, step 0.5 dB 1 dB 1 dB
20...200 ms, step 10 ms 50 ms 50 ms
20...200 ms, step 10 ms 80 ms 80 ms
20...200 ms, step 10 ms 60 ms 60 ms
0...4 dB, step 0.5 dB 0 dB 0 dB
500 ms (0), 1000 ms (1), 2000 ms (2), 30 2000 ms (2) 2000 ms (2)
1...30 s, step 1 s, Minimum time needed b 5s 5s
40...320 ms, step 10 ms 320 ms 320 ms

16...120 ms, step 2 ms 120 ms 120 ms
16 to 120, step 2ms 120 ms 120 ms
40...320 milliseconds, step 10 millisecond 100 milliseconds 100 milliseconds
1...1, step 1 Not Applicable Not Applicable
0...10 s, step 1 s, UP resource allocation r 3s 3s
Not defined (0), Network originated Not Applicable Not Applicable

configuration action (1), NetAct RNW
plan originated configuration action (2),
configuration action (3), Configuration
Element Manager originated mass config
action (5), NetAct originated direct RNW
change (6)
RNC2600
40 ms (2)
3s
127 (01111111b)
3809 (0000111011100001b)
HSDPA Priority 2 (2)
10 s
15
10 s
0 bps
3s
0 (no restriction)
1
2
SF32 (0)
SF8 (0)
0 dB
20 ms (1)
20 ms (1)
255
255
255
255
255
255
255
255
255
255
255
255
255
255
255
255
255
255
255
100
100
100
350 ms
Battery (1)
64 (7)
10 (4)
512 (10)
16 (3)
10 (1)
Infinity (0)
1 (0)
1 (0)
2 (2)
10 (2)
20 (2)
4 (1)
Battery (1)
64 (7)
8 (3)
512 (10)
64 (5)
8 (3)
Infinity (0)
1 (0)
1 (0)
2 (2)
8 (3)
16 (4)
4 (1)
Battery (1)
64 (7)
10 (4)
64 (7)
16 (3)
10 (1)
Infinity (0)
1 (0)
1 (0)
2 (2)
10 (2)
20 (2)
4 (1)
Battery (1)
64 (7)
8 (3)
64 (7)
64 (5)
8 (3)
Infinity (0)
1 (0)
1 (0)
2 (2)
8 (3)
16 (4)
4 (1)
Battery (1)
32 (6)
10 (4)
32 (6)
8 (2)
10 (1)
8 (4)
1 (0)
1 (0)
1 (1)
10 (2)
20 (2)
4 (1)
Battery (1)
32 (6)
8 (3)
32 (6)
32 (4)
8 (3)
Infinity (0)
1 (0)
1 (0)
1 (1)
8 (3)
16 (4)
4 (1)
DC-HSDPA preferred (0)
3 dB
5s
3
4
3
3
15
32 (6)
16 (5)
1.5
1.6
1.7
1.8
50 ms (3)
Limitation is active (1)
5s
0 kbps
0 kbps
0 kbps
0 kbps
0 kbps
0 kbps
0 kbps
0 kbps
0 kbps
0 kbps
0 kbps
0 kbps
0 kbps
0 kbps
0 kbps
0 kbps
0 kbps
0 kbps
0 kbps
0 kbps
0 kbps
0 kbps
0 kbps
0 kbps
0 kbps
0 kbps
0
0
50 %
2
0.9
SPI 5 (5)
5s
2s
8 ms (1)
1
8 kbps
200 ms (6)
3 dB
0.2 s
1s
4
5
4
5
1024 kbps
2048 kpbs
512 kbps
10 s
1 users
15
90
65
40
25
100
75
50
-8 dB
-11 dB
128 dB
-100 dBm
2s
10 s
-5 dB
4
SHO allowed (1)
1 dB
50 ms
80 ms
60 ms
0 dB
2000 ms (2)
5s
320 ms
120 ms
120 ms
100 milliseconds
Not Applicable
3s
Not Applicable
Comments
RAN1201 F-DPCH
RAN1201 F-DPCH
RAN1201 F-DPCH
Changed to 10 seconds Nov 2007 to support HSDPA RolloutWill be reviewed when there is enough
HSDPA traffic to see if we want to disable this mechanism from releasing HSDPA connection
Changed to 3s after the Inactivity Timer Trial

Set to 65535 kbps as a part of HSPA+ rollout to achieve peak speeds
RAN1201 F-DPCH
RAN1470 HSUPA 2ms TTI




RAN981 HSUPA 5.8 Mbps
RAN1201 F-DPCH
RAN1201 F-DPCH
Changed to ALLOWED in Nov 2007 to support HSDPA Rollout

RAN1201 F-DPCH

12575
12576
12593

12601
12602
12603
12617
12618
12619
12620
12621
12622
12623
12624
12625
12626
12627
12628
12629
12630
12631
12175
12176
12177
12178
12179
12180
12181
12182

38106
38173
38258
38259
38260
38261
38263
38264
38265
38266


New in RU20 on TOP

Monthly
Monthly
Monthly
Weekly
New in RU20 on TOP
New in RU20 on TOP
New in RU20 on TOP
New in RU20 on TOP
New in RU20 on TOP
New in RU20 on TOP
Monthly
Monthly
Monthly
Daily New in RU20
Monthly New in RU20
Monthly New in RU20
Monthly New in RU20
Monthly New in RU20
Monthly New in RU20
Monthly New in RU20
Monthly New in RU20
Monthly New in RU20
Monthly New in RU20
Monthly New in RU20
Monthly New in RU20
Monthly New in RU20
Monthly New in RU20
Monthly New in RU20
Monthly New in RU20
Monthly New in RU20
Monthly New in RU20
Monthly New in RU20
Monthly New in RU20
Monthly New in RU20
Monthly New in RU20
Monthly New in RU20
Monthly New in RU20
Monthly New in RU20
Monthly New in RU20
Monthly New in RU20
Monthly New in RU20
Monthly New in RU20
Monthly New in RU20
Monthly New in RU20
Monthly New in RU20
Monthly New in RU20
Monthly New in RU20
Monthly New in RU20
Monthly New in RU20
Monthly New in RU20
Monthly New in RU20
Monthly New in RU20
Monthly New in RU20
Monthly New in RU20
Monthly New in RU20
Monthly New in RU20
Monthly New in RU20
Monthly New in RU20
Monthly New in RU20
Monthly New in RU20
Monthly New in RU20
Monthly New in RU20
Monthly New in RU20
Monthly New in RU20
Monthly New in RU20
Monthly New in RU20
New in RU20 on TOP
New in RU20 on TOP
New in RU20 on TOP
New in RU20 on TOP
New in RU20 on TOP
New in RU20 on TOP
New in RU20 on TOP
New in RU20 on TOP
New in RU20 on TOP
New in RU20 on TOP
New in RU20 on TOP
New in RU20 on TOP
New in RU20 on TOP
New in RU20 on TOP
New in RU20 on TOP
New in RU20 on TOP
New in RU20 on TOP
New in RU20 on TOP
New in RU20 on TOP
New in RU20 on TOP
New in RU20 on TOP
New in RU20 on TOP
New in RU20 on TOP
New in RU20 on TOP
New in RU20 on TOP
New in RU20 on TOP
New in RU20 on TOP

Weekly New in RU20
Weekly New in RU20
Weekly
Weekly
Weekly New in RU20
Weekly New in RU20
Weekly
Monthly
Monthly
Daily
Daily
Daily
Monthly New in RU20
Monthly New in RU20


Weekly
Weekly
Weekly
Weekly
Daily
Daily New in RU20
Daily
Daily
Daily
Daily
Daily
Daily
Daily
Daily
Daily
Weekly New in RU20

Weekly New in RU20
Weekly New in RU20
Weekly New in RU20
Monthly
Weekly
Weekly
Weekly
Weekly
Weekly New in RU20
New in RU20 on TOP
New in RU20 on TOP
New in RU20 on TOP
Daily
Daily
Daily
Monthly
Monthly New in RU20
Weekly
New in RU30
New in RU40
New in RU40
New in RU40
New in RU40
New in RU40
New in RU40
New in RU40
New in RU40
New in RU40
New in RU40
New in RU40
New in RU40
New in RU40
New in RU40
New in RU40
New in RU40
New in RU40
New in RU40
New in RU40
New In RU50 EP1
New In RU50 EP1
New In RU50 EP1
New In RU50 EP1
New in RU40
New in RU40
New in RU40
New in RU40
New in RU40
New In RU50 EP1
New In RU50 EP1
New in RU40
New in RU40
New in RU30
New in RU30
New in RU30
9.00
9.00
9.00
Issue 6.2
9.00
8.00
8.00
8.00
8.00
8.00
8.00
8.00
8.00
8.00
8.00
8.00
8.00
8.00
8.00
8.00
8.00
8.00
8.00
8.00
4.50
4.50
4.50
8.17
8.17
8.17
9.00
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
9.00
9.00
9.00
8.00
4.50
4.50
8.00
8.16
4.50
8.00
8.00
4.50
9.00
4.50
9.00
8.00
8.00
8.17
8.13
8.18
8.17
4.50
RNMOBI Parameters
Abbreviated Name

LHOMinNrtDchAllocTime
NCHOFilterCoeffComLoadMeasDRNCCell
NCHOHystComLoadMeasDRNCCell
NCHOThrComLoadMeasDRNCCell
RANAPCauseLoadHO - RANAPCause1LoadHO
RANAPCauseServHO - RANAPCause1ServHO
SLHOHandlingOfCellLoadMeasNotAct
SLHOProfileBackgroundPSNRTData
SLHOProfileConvCSSpeech
SLHOProfileConvCSTData
SLHOProfileConvPSRTData
SLHOProfileConvPSSpeech
SLHOProfileInteractivePSNRTData
SLHOProfileStreamCSNTData
SLHOProfileStreamPSRTData
SLHOUseBackgroundPSNRTData
SLHOUseConvCSSpeech
SLHOUseConvCSTData
SLHOUseConvPSRTData
SLHOUseConvPSSpeech
SLHOUseInteractivePSNRTData
SLHOUseStreamCSNTData
SLHOUseStreamPSRTData
GapPositionSingleFrame
TGPLdoubleframeNRTPSgsm
TGPLdoubleframeNRTPSinterFreq
TGPLsingleframeAMRgsm
TGPLsingleframeAMRinterFreq
TGPLsingleframeCSgsm
TGPLsingleframeCSinterFreq
TGPLsingleframeNRTPSgsm
TGPLsingleframeNRTPSinterFreq
TGPLsingleframeRTPSgsm
TGPLsingleframeRTPSinterFreq
AnchorFmciIdentifier
AnchorFmcsIdentifier
AnchorHopiIdentifier
AnchorHopsIdentifier
CSFBDetection
DefaultAuthorisedNetworkId
DirectedRRCForHSDPALayerEnhanc
DisablePowerInHSDPALayeringDecision
DRRCForHSDPALayerServices
EcnoDifferenceThreshold
GANetwARFCN
GANetwBCC
GANetwNCC
GsmHandoverAMR
GsmHandoverCS
GsmHandoverNrtPS
GsmHandoverRtPS
HSCAHORabCombSupport
HSDPACellChangeMinInterval
HSDPACPICHAveWindow
HSDPACPICHReportPeriod
HSDPALayerLoadShareThreshold
HSDPAServCellWindow
HSDPASIRErrorAveWindow
HSDPASIRErrorFilterCoefficient
HSDPASIRErrorReportPeriod
HSDPASIRErrorServCell
HSDPASIRErrorTargetCell
HSPADRNCEcNoOffset
HSPADRNCSIRErrorOffset
IBTSRabCombSupport
LowerRxTxTimeDiff
LTETargetFreqCriterion
MaxNumISHOClPerAS
MultipleBSICIdent
PreferBandForLayering
RRCReDirBlockedCellAllowed
ServBtwnHSDPALayers
ServicesToHSDPALayer
SmartLTELayeringServ
UETxPowerMaxRef
UpperRxTxTimeDiff
FastUECancel
FastUEPeriod
FastUEThreshold
MBLBGuardTimer
Telecom Parameters
CellReselectionObservingTime
FastDormOverCpcPri
MaxCellReselections
RNMOBIId
SmartLTELayeringPrevT
TRelocOverall
TRelocPrep
EnableULQualDetRep
ULQualDetRepThreshold
UEQualityRepInterv
O&M Parameters
RNMOBIChangeOrigin
Full Name
Managed Object
Load handover minimum NRT DCH allocation time RNMOBI

NCHO filter coefficient common load meas DRNC cell RNMOBI
NCHO hysteresis common load measurement DRNC cell RNMOBI
NCHO threshold common load measurement DRNC cell RNMOBI
RANAP cause 1 to indicate load handover RNMOBI
RANAP cause 1 to indicate service handover RNMOBI
SLHO handling of cell load measurement is not active RNMOBI
Service profile for background PS NRT data in SLHO RNMOBI
Service profile for conversational CS speech in SLHO RNMOBI
Service profile for conversational CS T data in SLHO RNMOBI
Service profile for conversational PS RT data in SLHO RNMOBI
Service profile for conversational PS speech in SLHO RNMOBI
Service profile for interactive PS NRT data in SLHO RNMOBI
Service profile for streaming CS NT data in SLHO RNMOBI
Service profile for streaming PS RT data in SLHO RNMOBI
Use of SLHO for background PS NRT data RNMOBI
Use of SLHO for conversational CS speech RNMOBI
Use of SLHO for conversational CS transparent data RNMOBI
Use of SLHO for conversational PS RT data RNMOBI
Use of SLHO for conversational PS speech RNMOBI
Use of SLHO for interactive PS NRT data RNMOBI
Use of SLHO for streaming CS non-transparent data RNMOBI
Use of SLHO for streaming PS RT data RNMOBI
Gap position single frame RNMOBI

Transmission gap pattern length double frame: NRT PS service and GSM RNMOBI
Transmission gap pattern length double frame: NRT PS service and IF me RNMOBI
Transmission gap pattern length single frame: AMR service and GSM meas RNMOBI
Transmission gap pattern length single frame: AMR service and IF measur RNMOBI
Transmission gap pattern length single frame: CS service and GSM measu RNMOBI
Transmission gap pattern length single frame: CS service and IF measurem RNMOBI
Transmission gap pattern length single frame: NRT PS service and GSM RNMOBI
Transmission gap pattern length single frame: NRT PS service and IF mea RNMOBI
Transmission gap pattern length single frame: RT PS service and GSM me RNMOBI
Transmission gap pattern length single frame: RT PS service and IF measu RNMOBI
Anchor FMCI Identifier RNMOBI

Anchor FMCS Identifier RNMOBI
Anchor HOPI Identifier RNMOBI
Anchor HOPS Identifier RNMOBI
CSFB detection for LTE layering RNMOBI
Identifier of the Default Authorised Network RNMOBI
DRRC connection setup for HSDPA layer enhancements RNMOBI
Disable power in decision making for HSDPA layering RNMOBI
Services for DRRC connection setup for HSDPA layer RNMOBI
CPICH EcNo Difference Threshold RNMOBI
GAN ARFCN RNMOBI
GAN BCC RNMOBI
GAN NCC RNMOBI
Handover of AMR Service to GSM RNMOBI
Handover of CS Service to GSM RNMOBI
Handover of NRT PS Service to GSM RNMOBI
Handover of RT PS Service to GSM RNMOBI
RAB Combinations Supported by HSCAHO RNMOBI
Minimum interval between serving HS-DSCH cell changes RNMOBI
Averaging window of the CPICH Ec/No measurement RNMOBI
Reporting period of the CPICH Ec/No measurement RNMOBI
HSDPA layers load sharing threshold RNMOBI
CPICH Ec/No window for serving HS-DSCH cell selection RNMOBI
Averaging window of the SIRerror measurement RNMOBI
Higher layer filtering coefficient for HSDPA SIRerror RNMOBI
Reporting period of the SIRerror measurement RNMOBI
SIRerror threshold for the serving HS-DSCH cell RNMOBI
SIRerror threshold for the target cell RNMOBI
DRNC Ec/No offset for HSPA Inter-RNC Cell Change RNMOBI
SIR error offset for HSPA Inter-RNC Cell Change RNMOBI
RAB Combinations Supported by IBTS RNMOBI
Lower Rx-Tx TD Threshold RNMOBI
LTE Target Frequency Criterion RNMOBI
Max Number of ISHO Cancellations Per Active Set for a U RNMOBI
Multiple BSIC Identification RNMOBI
Preferred Band for Layering RNMOBI
RRC Connection Redirection allows blocked cells RNMOBI
ServBtwnHSDPALayers RNMOBI
Services to HSDPA layer in state transition RNMOBI
Smart LTE Layering service control RNMOBI
Maximum Reference UE transmission power RNMOBI
Upper Rx-Tx TD Threshold RNMOBI
Fast UE Cancellation RNMOBI

Fast UE evaluation period RNMOBI
Fast UE Threshold RNMOBI
MBLB Guard Timer RNMOBI
Cell Reselection Observing Time RNMOBI

Fast Dormancy and CPC priority RNMOBI
Max cell reselections RNMOBI
RNMOBI Identifier RNMOBI
Timer for Smart LTE Layering Prevention RNMOBI
T RelocOverall RNMOBI
T RelocPrep RNMOBI
Quality deterioration report from UL OLPC controller RNMOBI

UL quality derioration reporting threshold RNMOBI
UE Quality Measurement Reporting Interval RNMOBI
Change origin RNMOBI

Group
AC
AC
AC
AC
AC
AC
AC
AC
AC
AC
AC
AC
AC
AC
AC
AC
AC
AC
AC
AC
AC
AC
AC
AC
AC
AC
AC
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
PS
HC
HC
HC
HC
HC
HC
HC
HC
HC
HC
HC
HC
HC
HC
HC
HC
HC
HC
HC
HC
HC
HC
HC
HC
HC
HC
HC
HC
HC
HC
HC
HC
HC
HC
HC
HC
HC
HC
HC
HC
HC
HC

Telecom
Telecom
Telecom
Telecom
Telecom
Telecom
Telecom
PC
PC
O&M
Description
This parameter defines the minimum NRT DCH allocation time in a pure NRT connection
This parameter defines the measurement filter coefficient for the common load
measurements
This parameter of the inter-frequency
defines the measurement neighbour cellstime
hysteresis that for
arethecontrolled
common byload
DRNC.
The measurement
measurements is used to detect whether non-critical handovers are possible.
by the ofThe
This parameterisof
measurement
the inter-frequency
defines
event the load
based (event A
neighbour
threshold
and for thecells
event
that are
common
B). loadcontrolled
measurements the
DRNC. The measurement
inter-frequency neighbour is used
cells that toare
detect whether
controlled bynon-critical
the DRNC. handovers
The are
measurement is
This parameter
possible. is used in theistarget
The measurement RNC of (event
event-based the relocation
A and procedure.
event B).TheItmeasurement
defines which
used to
received detect
"Non-critical
RANAP whether
handovers"
cause or not
code non-critical
are, for example,
indicates handovers
to ofservice
the target andare
RNC possible.
UEthat
capability type handovers.
the original handover
This
is parameter
event-based
Service and load isbased
usedAin
(event andtheevent
target
handover RNC
B).
make use the
ofwasrelocation
this parameter.procedure. It defines which
reason
received in
"Non-criticalthe
RANAP source
handovers"
cause controller
are,
code for(RNC
indicates or
example, BSC)
to service
the target a load-based
and
RNC UE handover.
capability
that the type
original handovers.
handover
This parameter
Service and isbased
used inhandover
the target RNCuse of the relocation procedure. It defines which
reason
The in
possibletheload
source
values controller
for the (RNC
threshold makeor
areBSC)
load ofwas
thisaparameter.
values load-based
from 0 tothe handover.
100. If common
received
This RANAP
The parameter
parameterisvalue cause
isused,
used zero code indicates
means
in the target that
RNC to the
no RANAP
of target RNC
cause code
the relocation that original
indicates
procedure. It that the load
handover
defines which
measurement
reason
original in the source
handover reason the recommended
controller
was a(RNC orto
load-based values
BSC) are
was a RNC
handover. from 60
load-based to 80, which
handover. means that
received
The
This a RANAP
only parameter
rather high
parameter cause
valueloadzero
is used code indicates
means
isinindicated.
the target that
The
RNC the target
nomeasurement
RANAP cause
of the relocation that
to code the original
indicates
a procedure.
certain handover
It that
inter-frequencythe which
defines
reason
original
neighbour
received in the
cellsource
handover
RANAP reason
isvalue controller
activated was a(RNC orto
load-based
or deactivated BSC) was
thehandover.
by the RNPa RNC
service-based
parameter handover.
(ADJI)
The parameter
This parameter is cause
used zeroincode
the indicates
means
target that
RNCno RANAP
of target
the cause
relocation that
code the original
indicates
procedure. handover
It that the which
defines
AdjiComLoadMeasDRNCCellNCHO.
reason
original in the source
handover reasoncontroller
was a(RNC or
load-based BSC) was
handover.a service-based handover.
received
This RANAP
The parameter
parameter value cause
defines zero code indicates
meansa that
whether to the
no RANAP
non-active target RNC
load cause that the original
code indicates
measurement of a certain handover
that the
inter-
reason
original
frequency in the source
handover
neighbour reasoncontroller
cell was a(RNC or SRNC
BSC) was
service-based
(controlled by a service-based
handover.
or DRNC) blocks it handover.
from the
"Non-critical
The
This parameter handovers"
parameter value defines zero are,
themeansfor example,
preferred thatRAT service
no RANAP
or WCDMA and
cause UE capability
code
layer forindicates type
the background that theofPS
set
handovers.cells
NRT da
that are handover
Service
original usedload
and as neighbour
based
reason cells
handover
was a inmake
inter-frequency thisservice-
use of handover.
service-based parameter. and load-based handover
The
This parameter
parameter value
procedures. defines zerothemeans
preferred thatRAT
no RANAP
or WCDMA cause code
layer forindicates that the CS spe
the conversational
original handover reason was a service-based handover.
This parameter defines the preferred RAT or WCDMA layer for the conversational CS tra
Being non-active means that the load measurement is not activated by O&M, or the
This parameter
activation of thedefines the preferredhas
load measurement RATnotorbeen
WCDMA layer for the conversational PS RT
successful.
This parameter defines the preferred RAT or WCDMA layer for the conversational PS spe
Value 0 of this parameter means that a cell with a non-active load measurement is
This parameter defines the preferred RAT or WCDMA layer for the interactive PS NRT da
handled like a cell that is not in a load-based handover state, even when exact
This parameter
information about defines
this isthe notpreferred
available.RAT or WCDMA layer for the streaming CS non-tran
This parameter defines the preferred RAT or WCDMA layer for the streaming PS RT data
Value 1 means that a cell with a non-active load measurement is blocked from the
This
SLHO parameter defines whether service- or load-based handovers are performed for
procedure.
This parameter defines whether service- or load-based handovers are performed for t
This parameter defines whether service- or load-based handovers are performed for th
This parameter defines whether service- or load-based handovers are performed for th
This parameter determines the starting slot number of the transmission gap inside a
This parameter defines the length of transmission gap pattern for GSM inter-RAT
measurement
This parameterindefines
case ofthe
compressed mode with double
length of transmission frame for
gap pattern gapWCDMA
and UE inter-
using
non-real
frequency time packet
measurement scheduled
in case data service.
This parameter defines the lengthofofcompressed
transmissionmode
gap with double
pattern frameinter-RAT
for GSM gap and UE
using non-real
measurement time packet scheduled data service.
case ofthe
compressed mode with single
length of transmission frame gap
gap pattern and UE using
for WCDMA inter- AMR
service.
frequency measurement in case
This parameter defines the lengthofofcompressed
transmissionmode
gap with single
pattern frameinter-RAT
for GSM gap and UE
using AMR
measurement service.
case ofthe
for WCDMA inter-
circuit switched
frequency data
measurement service.
in case of compressed mode with single frame gap and UE
using circuit
measurement switched data service.
case ofthe
for WCDMA inter- non-
real time packet scheduled service.
frequency measurement in case of compressed mode with single frame gap and UE
using non-real time packet scheduled service.
measurement
case ofthe
for WCDMA inter- real
time packet scheduled service.
frequency measurement in case of compressed mode with single frame gap and UE
using real time packet scheduled service.
This parameter identifies the Measurement Control Parameter Set (FMCI object) which
This parameter identifies the Measurement Control Parameter Set (FMCS object) whic
Whenparameter
This this parameter is enabled
identifies and theset
the parameter Directed
(HOPIRRC connection
object) setup the
which controls for HSDPA
inter-frelayer is enabled (DirectedRRCForHSD
This
1. The parameter
RNC takes identifies
into account the parameter the service setrequested
(HOPS object) in thewhich controls therequest
RRC connection intra-fr when making the decision of Directed
This parameter enables/disables the CSFB detection for LTE layering.
2. The RNC supports HSDPA load sharing between layers.
Parameter tells the number of the authorised network list which is used as a default
CSFB
authorised detection network canset. be activated
List includes justthe for PLMN blind redirection
identifiers cases which or areforconsidered
all cases (for
3.
blind Theredirection,
RNC supports simultaneous useredirection
of Directed RRC Connection Setup andis Directed RRC Connection Setup for HSDP
equal to the home PLMN of the subscriber. Zero (0) value means that allcheck
measurement based and handover). If the PLMNs are
activated
This
authorised. parameter just forisblind usedredirection,
to define if then CSFB indication
the available HSDPA power is not checked is taken in into account
measurement
in the decision based
making redirection
for and handover to LTE,power but it is checked only in cases
Directed
where blindRRC connection
redirection is setup for HSDPA layer (from non-HSDPA layerintothe
HSDPA
used.
layering. If HSDPA is not used HSDPA
decision
layer) in making,
the cell isthen
done only if theUE
the number
indicates of HSDPA the serviceusersininthe theRRC cell and cell weight will
Connection
This
be parameter
taken into account definesinthe the minimum
decision allowed difference for the CPICH EcNo
making.
Request
If the CSFB
differences (Establishment
detectionthe
between cause)
is enabled,
active which
set then
cell is
just
and activated
those
the of by this
users
neighbouring can parameter.
be moved
cell. It isThere
to LTE
used is that
to alsoare
filter
UTRAN-to-GAN
own switch (Conv handover
Call with method
HS voice) makes for use
the cases anwhere RF channel UE withnumber
CS voice (ARFCN) over and Base S
indicated
out
This all
parameter to
the CPICH be in WCDMA
EcNoinDifference
isinities
used because
the RRC values of
ConnectionCS fallback
that are Request (CSFB).
lower and thanstate the threshold.
transition from
HSPA
UTRAN-to-GAN capability handover a Conversational
method makes call.
use of an RF ischannel number (ARFCN)
Cell_FACH to Cell_DCH state phases when a decision made into which HSDPA and the Ba
CSFB
capable layer thehandover
UTRAN-to-GAN detection can be
HSDPA capable used to
method UE prevent
makes move
will be of
usedirected users
of an RF with no LTE
to.channel number (ARFCN) subscription to
LTE.
and It
the might
Base Stationalso help to
Identity optimize handling
Codean(BSIC) of LTE
to identify coverage
GANtocells. problems,
The because
Base Station if
This
CSFB parameter
is indicated, indicates
then UEwhether
is moved inter-RAT
to WCDMA handover
with CS call GSM setup is allowed
reason for circuit
from
Identity
switched Code(CS) isvoice
composed services. of the Network
Thebecausealternative Colour values Code ofor (NCC)
the and theare Base Station
good
This
Colour radio
parameter
Code field,
(BCC). not for
indicates The example
whether
parameter an inter-RAT
indicates of coverage
thehandover
NCC toparameter
load
allocated GSM reason.
is allowed
for the GAN
thefor circuit
cells.
following:
switched (CS) data services. The alternative values of the parameter are the
This
CSFB parameter
is detected indicates
by presence whether of anCSFB inter-RAT indication handover in any (cell of the change)
following to messages
following:
-GSM/GPRS
arriving
This No; at RNC:indicates whether an inter-RAT handover (cell change) to isinalso
handover
parameter is allowed
to GSM for
is non-real
not allowed time for packet
CS voice switched services. (PS) Thedata services
handover
CELL_DCH
prohibited
This parameter if astate
isCS of
voice
determines connected service mode.
is a part
theallowed
minimum The alternative
ofinterval
multiservice. between values serving ofservices
theHS-DSCH
parameter arechanges
cell the when the periodical CPICH Ec/N
--This
GSM/GPRS
following:
RRC
No; CONNECTION
handover
parameter allowed
to GSMREQUEST
describes for
is thereal
not time
services packetfor
thatCS switched
are data (PS)
services.
supported data
byThe HSPA handover in is also
Capability Based H
-CELL_DCH
prohibited
This RELOCATION
parameter if state
a CS REQUEST
of
data
determines connected
service ismode.
a
the averaging part The of alternative
multiservice.
window values
for the periodical of the parameter
CPICH are the
Ec/Noameasurement reporting, which is used a
-- Yes;
This
following: handoverCOMMAND.
parameter
Iu RELEASE istooverruled
GSM is allowed if Fast HSPA for CSMobility voice services. is enabled In case in theofserving
multiservice, HS-DSCH cell with the WCEL parameter FastH
-This
handover No; cell
parameter change
to GSM to
must
determines GSM/GPRS be allowed
the is not
for
reporting allowed
all CS
period and for
of PSnon-real
the services
CPICH time PS
which
Ec/No data services.
participate
measurement, in the
which is used as a criterion for the serv
-This
This Yes;handover/cell
handover is
parameter tooverruled
GSM is to allowed
ifGSM/GPRS
Fast for CSMobility
HSPA data services.
is enabled In case ina the of serving
multiservice, HS-DSCH adata cellofwith
The
multiservice
-Redirection
No; parameter
cell change before
and change
determines
the
handover
to GSM/GPRShandovertotheLTE maximum
is
is
is possible.
prevented
not allowed is also
allowed also
for prohibited
difference
in
real cases
time ifPS
where non-real
between
data thetime
E-UTRAN
services. CPICH PS
Service
The Ec/No the the
bestWCEL
activeparameter
set cell andFastH
the C
handover
service is to
a GSM
part of must
multiservice.be allowed for all CS and PS services which participate in the
This parameter
Handover IEbefore
handover/cell
multiservice is
ischange overruled
received thetohandover for if Fast
the RAB
GSM/GPRS HSPA from
is also
is possible. Mobility
core is enabled in the
network.if a real time PS data service
prohibited serving HS-DSCH cell with the WCEL parameter FastH
This
-This
isPriority; parameter
ofhandover is overruled
to GSM if Fast
is allowed HSPA for Mobility
CS voice is services.
enabled in Thethehandover
serving HS-DSCH cell with the WCEL parameter FastH
a part
parameter multiservice.
is used to define the threshold (number of HSDPA users) forisload also
-allowed
The Yes;parameter
cellif change
a CS voice
is to GSM/GPRS
valid service
if the is a
Measurementis allowed
part of for non-real
multiservice.
Based LTE time PSisdata
Layering enabledservices. with In
the
sharing
-casePriority; between
handover HSDPA toaGSM layers.
is allowedchange for CS to data services. The
The ofcell
Yes;RNMOBI multiservice,
-WCEL-SmartLTELayeringEnabled
change parametersto service handover/cell
GSM/GPRS HSDPACPICHReportPeriod
isparameter
allowed GSM/GPRS
fororrealif the time and
LTE PS musthandover
handover
data be is
HSDPACPICHAveWindow allowed
services. enabled
is also
In for
case allof (or the corresponding WCEL param
with
allowed
CS and if
PS a CS
services data which is a
participate part of in multiservice.
the multiservice before the handover/cell
the
TheWCEL-LTEHandoverEnabled
Before parameter
multiservice, the threshold determines
a handover/cell is reached the change inparameter.
averaging
anytoofGSM/GPRS window
the cells for in mustthe same
the periodical
be allowed sector, ULfor SIRerror
the all
HSDPACS and measur
change
PS is possible.
The parameter determines the filtering coefficient of the UL SIRerror measurementis
UEs services
that are which
establishing participate the in
RRC the multiservice
connection and before
changing the handover/cell
the state from change
possible.
Cell_FACH
which is used to as Cell_DCH
a criterion arefor directed
serving toHS-DSCH
same layer. cellThis change is done by comparing the
procedure.
The parameters
Parameter GsmHandoverAMR and/or GsmHandoverCS ULfor CS data/voice
cell weightsdetermines the reporting period
(CellWeightForHSDPALayering). of the dedicated
UEs are directed SIRerror
to the cellmeasurement,
that has the w
services
The parameterscan overrule the
GsmHandoverAMR value of the parameter
and/or GsmHandoverNrtPS
GsmHandoverCS for CS in case of
data/voice
greatestparametercell weight.
determines If the cell
theweights
level ofdata are
the equal,UL theSIRerror
SIRerror UEs the aremeasurements
directedcell, to the cell that
The
services
BTS
multiservice. physical
can If either
overrule
layer CS measurement
voice
theparameter
value and/or
of the
period
parameter
for
services UL areof
GsmHandoverRtPS prioritized, serving theinRNC which
caseshall
is 80initi
of layer
has
ms. the greatest
The filter number
coefficient of HSDPA users.
controls the higher layer filtering of physical
execute
The parameter
multiservice. the handover determines
If either CS to GSM the even
voice required
and/or if thedata levelcell ofchange
services the UL are toSIRerror
GSM/GPRS
prioritized, theistarget
in the not allowed
RNC cell in
shall
UL
for SIRerror time
non-real measurements
PS data before
services. measurement reporting is performed by the BTS.
execute
When thethe
This parameter inter-system
threshold defines anhandover
is reached offsetinwhich anyeven ofisthe ifapplied
the cellin
cells tochange
the
the sameDRNC to GSM/GPRS
sector,
cells inthe iscase
theHSDPA not ofload H
allowed
sharing
The approximatedfor
between real timelayers PS
weight data
is done. services.
The load sharing decision making is based on the
This parameter defines anofoffset the latestdeducted measurement from the UL resultSIRwith errorthe different values of
measurement,
available
the
which parameter HSDPA
is applied is inaspowerfollows:
the caseper of user HSPA andInter-RNC
cell weight.Cell Change. The SIR
This parameter defines all the single and multi- rab combinations that are supported
error offset is deducted from the periodical UL SIR error measurement
This
Valueparameter
This
result (Weight)
parameter
of the SRNC is used
defines cell when in
thethe RRC Connection
absolute
there arethreshold
candidate Request
which cellsis located and state
used thetransition
byunder UE DRNC.to trigger from the
Cell_FACH
0 (100%),
reporting event to
1 (71%), Cell_DCH
6G 2 (50%),
due state
to UE3Rx-Tx phases.
(35%), 4 (25%), 5 (18%), 6 (13%), 7 (9%), 8 (6%), 9
This parameter defines whether only time qualified difference.
frequencies or all target frequencies
(4%),
The
are 11
offset
indicated (2%).
also defines
asspecifies
LTE target the threshold
frequencies for HSPA
in the RRC MAC-d flow
message release when
while redirecting the the UE
This
When parameter
the UE
cellRx-Tx time the maximum
difference forare number
a radio of ISHO
link Cancellations that are allowed
toincluded
inter-RNC
to LTE system. change
The qualified cannot be started.
frequencies are those frequencies in the active set falls
The parameter defines what services allowed be moved to whose
LTE bymeasured
Smart LTE Layering, Measurement Based LTE L
Higher
below
This parameter
RSRP layer
the
power, filtering
threshold,
and for RSRQ has
the UE
Multiple been sends
BSIC
quality specified an event
Identification
values in the
are 6G3GPP
better triggered
indicatesthan TSthreshold
if25.433.
measurement
the feature values is usedreport
set by on to the l
RNC
RRM.
RNC
All and the RNC deletes the radio link from the active set.
Thistarget
UEs with
parameter frequencies
services defines include
not supportedthe preferred qualified
in LTE frequencies,
should not
frequency band bemeasured
redirected
under the non-qualified
/ handed
RNC. This over bandtoisLTE, pre because it is possible that those UE
frequencies, and non-measured carrier frequencies.
This
If theparameter
Smart value
LTE Layeringof this defines
parameter whether
is enabled 0,SLHO
is with thenthethe or MBLB
qualified blocked
SmartLTELayeringEnabled frequencies cells are areallowed
indicated
parameter. to be in the
target
HSDPA cells
RRC CONNECTION for
layering for UEsRRC Connection
RELEASE in common Redirection.
message channels in the fromorder HSDPA of best layer quality (RSRQlayer
to HSDPA level)in
first.
Smart
the cellLTE is done,Handover the is
if from UE enabled
indicates with theLTEHandoverEnabled
service which is activated parameter. by this
In state
SLHO ortransition
MBLB blocked Cell_FACH
cell isisa1,cell to Cell_DCH,
which the UE isastransferred to parameter.
thethe HSDPA
If the value of this parameter then first is interpreted
qualified frequencies blocked arecell in
indicated SLHO
in the
layer
or MBLB if it has requestedIf the
procedures. MBLB service load to be definediswith
information not this
available,parameter. then SLHO
order
Bit
If 2 (PS
WCEL- of best quality (RSRQ
Streaming)
HSDPALayeringCommonChEnabledand Bit level), 3 (PS then measured
Conversational) parameternon-qualified
are notisrelevant OFF,measuredRNC for should
the Smart notLTE Handover. PS Conversational or PS
information
frequencies
use this parameter (loaded/
are indicated innot state loaded) the is used
intransition from only.
Cell_FACH to Cell_DCH phase.
same list according to quality order, and after that non-measured carrier frequencies
Value
are put'0'in(Disabled)
the list according means that priority SLHO order, or MBLB and this blocked
list of target cells are not feasible
frequencies sent target
to UE
cells for RRC Connection
through RRC message RRC CONNECTION RELEASE. Redirection.
Value '1' (Enabled) means that SLHO or MBLB blocked cells are feasible target cells
for RRC Connection Redirection.
This parameter defines the maximum transmission power level a reference UE can
use. It is used with
This parameter CPICHRSCPThresEDCH2MS
defines to define
the absolute threshold which is usedthe
byE-DCH
the UE2toms TTI the
trigger
coverage area of the UE.
reporting event 6F due to UE Rx-Tx time difference.
If theparameter
This
When maximum
the UE Rx-Tx RF output
determines power capability
the threshold
time difference of the
value
for a radio forUE
link the isUE's
higher
included thanactive
active
in the thechange
set one
set set toby
becomes
this
detectparameter,
greater that
thanthe the
theUE coverage
has beenthe
threshold, area
moving
UE of the
slowly.
sends UE is
The
anfor wider
event than
handover the
6F triggered coverage
control calculates
measurement area set
how by
report
This
the parameter determines
CPICHRSCPThresEDCH2MS the time period
parameter. evaluating the active set change frequency
many
to the times
RNC and the active
the RNC setdeletes
cells have the changed
radio linkcompletely
from the activeduring the time period
set.
This parameter determines the threshold value for the UE's complete active set cell
FastUEPeriod.
change
If
This for theoffast
theparameter
number movingactive
complete
determines UE information.
a periodset of time The
changes goes
during handover control
under Multi-band
which or equals calculates
toload how han
thebalancing
threshold
many times the the
FastUECancel, active set cellscontrol
handover have changed
sends that completely
slow mobilityduring the time period
information to the RRC
FastUEPeriod.
entity.
The timer is set when the first Cell Update message due to 'cell reselection' is
If the number
received whileofthecomplete
UE is inactive
CELL_FACH set changes equals to or
or CELL_PCH exceeds
state. In the the
expirythreshold
ofand
the
With parameter
FastUEThreshold, "FastDormCpcPriority"
the handover control operator
informs canRRC
the change Fast
entity Dormancy
about 'fast moving
timer,
CPC the counter MaxCellReselections
priority.information. is reset.
UE'
This mobility
parameter specifies theandmaximum allowed number of Cell Reselections in the
If
TheCPC (RAN 1644)
parameter defines feature
the minimum Fast amount
Dormancy are active,
of the
time that theFast
UE Dormancy
must be inand
WCDMA CPC system after RRC Connection Setup
If there
CELL_FACH
priority are tooor
parameter many
CELL_PCH
valuereselectionsstate
is 0( = forFast coming
before
Dormancy from
transition UE
higher priority) and UE is time,
to within
the the
URA_PCH observation
state.
This parameter is the identifier the RNMOBIhas object
the UE is switched
requesting to the URA_PCH state.isOtherwise tothe Cell_PCH state is chosen.
Setting
The the Fast
amount timer's
of
Dormancy
cell value toothen
reselection lowisUE state
might
countedcausein
changed
pingthe
both pong cell_PCH
redirections
CELL_FACH
or between
and
URA_PCH.
CELL_PCH WCDMA and LTE, while setting the timer's va
If CPC (RAN 1644) feature and Fast Dormancy are active, Fast Dormancy and CPC
Below
This
states.
priority isWhen
an example
parameter
parameterthespecifies
UE
valueof the
is in 1target
isthe
the maximum
(= RRC
CELL_FACH
CPC state
hastime selection
for
state,
higher thethe when
protection
value
priority) value
andofUE of is
the the 3 overall
is usedReloca
counter
requesting for
Fast
MaxCellReselections:
MaxCellReselections
Dormancy
This parameter then specifies cannot
UE state the is notbe used
changed.
maximum as a trigger for the CELL_FACH
time for the Relocation Preparation procedure to URA_PCH
transition, but it is used when deciding a target state after the MAC-c entity has sent
Velocity..Cell
an radius..Cell
inactivity indication Update..Target
to Layer 3. RRC state
..km/h..........km.............frequency
Note: If parameter value is set
This parameter enables or disables the quality to zero, the URA_PCH state is
deterioration not infrom
report useUL andOLPC
all UEs
..50..............10............12
will be
controller switched
procedure.Cell_PCH minutes.......CELL_PCH
only.
If the uplink SIR target hasminutes.......CELL_PCH
..50..............20............24 reached the maximum, and the uplink SIR Target modificati
..75..............10..............8
When enabled, it may initiate minutes........URA_PCH
a bearer reconfiguration procedure; or if the serving cell
..75..............20............16
(or cells participating in softminutes.......CELL_PCH
handover) has neighboring cellsMeasurement
in another carrier
The parameter defines theminutes........URA_PCH
.100.............10..............6 reporting interval for UE Quality when periodic
frequency or system, the RNC may tell the mobile station to start inter-
.100.............20............12
frequency/system measurements minutes.......CELL_PCH
when it receives the quality deterioration report
from the UL outer
The parameter loop PC
defines the controller.
origin of the last configuration action affecting the object.
1...60 s, step 1 s 20 s 20 s
0 (0), 1 (1), 2 (2), 3 (3), 4 (4), 5 (5), 6 (6) 15 (15) 15 (15)
0...60 s, step 0.01 s 3s 3s
0...100, step 1 70 70
0...255, step 1 43 43
0...255, step 1 0 0
0...255, step 1 0 0
0...255, step 1 41 41
0...255, step 1 0 0
0...255, step 1 0 0
Not blocked (0), Blocked (1) Not blocked (0) Not blocked (0)
Not defined (0), GSM (1), WCDMA (2), W Not defined (0) Not defined (0)
None (0), Load HO (1), Service HO (2), S None (0) None (0)
0...8, step 1 4 4
3...144, step 1 4 read-only 4 read-only
1...100, step 1, Not defined (0) 0 0

1...100, step 1, Not defined (0) 0 0
1...100, step 1, Not defined (0) 0 0
1...100, step 1, Not defined (0) 0 0
Disabled (0), Enabled for blind Disabled (0) Disabled (0)
redirection cases
0...10, step 1 only (1), Enabled for all 0 (All PLMNs are authorised) 0 (All PLMNs are authorised)
cases (2)
No (0), Yes (1) No (0) No (0)
Bit 0: Conversational Call, Bit 1: Streaming 204 204
-20...10 dB, step 1 dB -4 dB -4 dB
0...1023, step 1, Not defined (65535) 65535 65535
0...7, step 1, Not defined (255) 255 255
0...7, step 1, Not defined (255) 255 255
No (0), Yes (1), Priority (2) 1 1
No (0), Yes (1), Priority (2) 0 0
No (0), Yes (1) 0 0
No (0), Yes (1) 0 0
Bit 0: PS I/B RAB (Always 1), Bit 1: PS 1 1
0...10 s, step 1 s 3s 3s
1...10, step 1 3 3
250 ms (0), 500 ms (1), 1000 ms (2), 2000 500 ms (1) 500 ms (1)
0...48, step 1 3 3
0...6 dB, step 0.5 dB 2 dB 2 dB
1...10, step 1 3 3
100 % (0), 71 % (1), 50 % (2), 35 % (3), 25 18 % (5) 18 % (5)
0...10 s, step 0.5 s 0.5 s 0.5 s
-10...0 dB, step 0.5 dB -3 dB -3 dB
-10...0 dB, step 0.5 dB -2 dB -2 dB
0...6 dB, step 0.5 dB 3 dB 3 dB
0...6 dB, step 0.5 dB 3 dB 3 dB
Bit 0: PS NRT RAB, Bit 1: PS Streaming 1 1
RAB, Bit 2: CS AMR RAB,
768...896 chips, step 1 chips Bit 3: CS 874 chips 874 chips
Conversational data RAB, Bit 4: CS
Qualified
StreamingFrequencies
data RAB, Bit only
5: (0),
2/3 All
PSTarget
NRT Qualified Frequencies only (0) Qualified Frequencies only (0)
Frequencies
RAB, Bit 6:
1...5, step 1 CS(1)
AMR RAB + PS NRT 1 1
RAB, Bit 7: CS AMR RAB + 2/3 PS NRT
off (0), on
RAB's, Bit (1)
8: CS AMR RAB + PS off (0) off (0)
Streaming
0...51, stepRAB,
1 Bit 9: CS AMR RAB + 0 0
PS Streaming RAB + PS NRT RAB, Bit
10: CS AMR RAB + PS Streaming RAB
Bit2/3
+ 0: PS
Background
NRT RABs, Call,BitBit
11:1:CS
Interactive C 3 3
Conversational data RAB + PS NRT
Any type of service is requested (0), NRT Any type of service is requestedAny
(0) type of service is requested (0)
RAB, Bit 12: CS Conversational data
Bit 0: +Background
RAB 2/3 PS NRT RABs,, Bit 1:Bit
Interactive,
13: PS B 3 3
Streaming RAB + PS NRT RAB, Bit 14:
PS Streaming RAB + 2/3 PS NRT RABs,
Bit 15: CS Streaming data RAB + PS
NRT RAB,
-50...33 dBm, step 1 dBm 24 dBm 24 dBm
1152...1280 chips, step 1 chips 1174 chips 1174 chips
1...59, step 1 1 1
1...60 second, step 1 second 10 second 10 second
2...60, step 1 3 3
0...60 s, step 1 s 10 sec 10 sec
1...60 min, step 1 min 16 min 16 min

0=Fast Dormancy has higher priority (0),
0=Fast
1 Dormancy has higher priority
0=Fast(0)Dormancy has higher priority (0)
0...100 times, step 1 times 3 times 3 times
1...120, step 1 20 20
1...16 s, step 1 s 8s 8s
1...16 s, step 1 s 6s 6s
Disabled (0), Enabled (1) 0 1

0.5...5 s, step 0.5 s 0.5 s 0.5 s
4000 ms (0), 6000 ms (1), 8000 ms (2), 1 16000 ms (4) 16000 ms (4)
Not defined (0), Network originated config Not Applicable Not Applicable
RNC2600
20 s
15 (15)
3s
70
43
0
0
41
0
0
Not blocked (0)
Not defined (0)
Not defined (0)
Not defined (0)
Not defined (0)
Not defined (0)
Not defined (0)
Not defined (0)
Not defined (0)
None (0)
None (0)
None (0)
None (0)
None (0)
None (0)
None (0)
None (0)
4
4
4
4
4
4
4
4
4
4
4
1
4
7
1
Disabled (0)
0 (All PLMNs are authorised)
Enabled (1)
No (0)
989
-4 dB
65535
255
255
1
0
1
0
1
3s
3
500 ms (1)
3
2 dB
3
18 % (5)
0s
-3 dB
-2 dB
3 dB
3 dB
1
874 chips
Qualified Frequencies only (0)
1
off (0)
0
Disabled (0)
3
NRT PS RAB is requested (1)
3
24 dBm
1174 chips
1
10 second
3
10 sec
30 min
0=Fast Dormancy has higher priority (0)
0
Not Applicable
10
15 s
15 s
1
0.5 s
16000 ms (4)
Not Applicable
Comments
Values suggested by Chris Johnson June2009
Amended in Dec.2010. Parameter value should be set to Enabled (1) across all RNCs in the network
Ammended in Dec. 2010
AP2 Decide Value
Changed to 0 Nov 2007 to support HSDPA Rollout. Disables use of use of SIR measurement in
RN2.2CD1 to avoid
May need review a known
when fault with the measurement.
SIR measurement ToRow
is reviewed (see be reviewed
24) when CD2 is rolled out
May need review when SIR measurement is reviewed (see Row 24)
Amended in Dec.2010. Value should be set NRT PS RAB is requested (1) across all RNCs in the
network
Value of 0 disables feature
Changed to 15 s for rollout of SRNS Relocation July 2009

Changed to 15 s for rollout of SRNS Relocation July 2009

10858
10905
10866
10963
10638
10829



38219
38220






Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Weekly
Weekly
Weekly
Weekly
Monthly
Daily
Daily
Daily
Daily
Daily
Weekly
Weekly
Weekly
Weekly
Weekly
Weekly
Weekly
Weekly
Weekly
Weekly
Weekly
Monthly New in RU20
Monthly
Weekly
New in RU20 on TOP
New in RU20 on TOP
New in RU20 on TOP

Daily
Weekly New in RU20
Monthly
Weekly
Weekly
Weekly
Monthly
Daily
Weekly
Weekly
Daily
Daily
Daily
New In RU50 EP1
New In RU50 EP1
New In RU50 EP1
New in RU40
New in RU30
New in RU30
New in RU30
New in RU40
New in RU30
4.5
4.5
4.5
4.5
9.0
9.0
9.0
4.5
4.5
4.5
4.5
9.0
4.5
9.0
9.0
9.0
9.0
9.0
9.0
4.5
9.0
Issue 5.5
9.0
4.5
4.5
4.5
4.6
9.0
4.0
4.0
9.0
RNPS Parameters
Abbreviated Name

HSFACHRestTimerDTCH
ActivationTimeOffset
CrQueuingTimeDL
CrQueuingTimeUL
DCHUtilBelowDowngradeThr
DCHUtilHighAveWin
DCHUtilHighBelowNRTDataRateThr
DCHUtilHighTimeToTrigger
DCHUtilLowerAveWinBitRate - DCHUtilLowerAveWin128
DCHUtilLowerDowngradeThrBitRate - DCHUtilLowerDowngradeThr128
DCHUtilLowerTimeToTriggerBitRate - DCHUtilLowerTimeToTrigger128
DCHUtilMeasGuardTime
DCHUtilUpperAveWinBitRate - DCHUtilUpperAveWin128
DCHUtilUpperDowngradeThrBitRate - DCHUtilUpperDowngradeThr128
DCHUtilUpperTimeToTriggerBitRate - DCHUtilUpperTimeToTrigger128
DLOptimisationProhibitTime
DLOptimisationPwrOffset
FactorMinPBSinterval
HSChaPrefInDataSesProf
HSFACHDiscardTimerDTCH
ICRDowngradeDelayTimer
InactDetForStreamingRB
IurPriority
LargeDataThr
LargeDataTime
MEHTVMPendingTime
QoSPriorityMapping - PriForBackARP1
QoSPriorityMapping - PriForConvOnHSPA
QoSPriorityMapping - PriForHSFACHDTCH
QoSPriorityMapping - PriForIntSignaling
QoSPriorityMapping - PriForIntTHP1ARP1
QoSPriorityMapping - PriForSRBsOnHSPA
QoSPriorityMapping - PriForStreamARP1
RTOverNRTPriThresholdARP1
SmartInactivityTimerDCH
SmartInactTimerFACH
TrafVolThresholdDLHigh
TrafVolThresholdDLHighBitRate - TrafVolThresholdDLHighDCH128
TrafVolThresholdULHigh
TrafVolThresholdULHighBitRate - TrafVolThresholdULHighDCH128
TrafVolTimeToTriggerDL
TrafVolTimeToTriggerUL
ULLoadStateTTT
Telecom Parameters
CellDCHtestTmr
RNPSId
ToCellFACHinTest
O&M Parameters
RNPSChangeOrigin
Full Name
Managed Object
MAC-ehs Reset Timer for DTCH data on HS-FACH RNPS
Offset for activation time RNPS

Maximum downlink capacity request queuing time RNPS
Maximum uplink capacity request queuing time RNPS
Threshold below the downgrade bit rate RNPS
Window size for the high throughput measurement RNPS
Threshold below the NRT DCH data rate RNPS
Time to trigger for the high throughput measurement RNPS
Lower measurement window size for NRT DCH of 128 kbps RNPS
Lower downgrade threshold for the NRT DCH of 128 kbps RNPS
Lower time to trigger for the NRT DCH of 128 kbps RNPS
Guard time for throughput measurement RNPS
Upper measurement window size for NRT DCH of 128 kbps RNPS
Upper downgrade threshold for the NRT DCH of 128 kbps RNPS
Upper time to trigger for the NRT DCH of 128 kbps RNPS
Dynamic Link Optimisation prohibit time RNPS
Power offset for dynamic link optimisation RNPS
Factor to determine minimum PBS interval RNPS
HS-RACH/FACH Preferred in Data Session Profiling RNPS
Discard Timer for DTCH data on HS-FACH RNPS
ICR Downgrade Delay Timer RNPS
Inactivation detection for streaming radio bearer RNPS
Priority handling over Iur-interface RNPS
Large Data Threshold RNPS
Large Data Time RNPS
Temporary TVM pending time for the Mass Event Handler RNPS
Priority for Background TC with ARP 1 RNPS
Priority for conversational on HSPA RNPS
Priority for PS data over HSPA on CELL_FACH state RNPS
Priority for Interactive TC marked for signaling use RNPS
Priority for Interactive TC with THP 1 and ARP 1 RNPS
Priority for SRBs on HSPA RNPS
Priority for Streaming traffic class with ARP1 RNPS
RT-over-NRT priority threshold for ARP1 RNPS
Inactivity timer for LFD phone DCH RNPS
Inactivity Timer for LFD phone in Cell_FACH RNPS
Downlink traffic volume measurement high threshold RNPS
Traffic volume threshold for UL NRT DCH of 128 kbps RNPS
Traffic volume threshold for DL NRT DCH of 32 kbps RNPS
Traffic volume threshold for DL NRT DCH of 8 kbps RNPS
Uplink traffic volume measurement high threshold RNPS
Downlink traffic volume measurement time to trigger RNPS
Uplink traffic volume measurement time to trigger RNPS
UL loaded state time to trigger RNPS
Test timer for inactivity supervision in Cell_DCH state RNPS

RNPS Identifier RNPS
Test switch for Iu release in Cell_DCH state RNPS
Change origin RNPS

Group Description
AC This parameter controls the reset of the MAC-ehs reordering functionality value of the
HSDPA
This MAC-ehs
parameter Reset Timer
determines the for the value
offset Commonthat MAC FlowtoPriority
is added Queuestime, which RNC has produc
the activation
transmitting DTCH data on HS-FACH. The timer is expressed in multiples of T1
PS values
This (milliseconds).
parameter Used when
is overruled if FastMAC-ehs reordering
HSPA Mobility queueinisthe
is enabled reset in CELL_FACH
active set cell with the WCEL param
PS and CELL_PCH.
This parameter defines how long the DRNC may queue a PS capacity request after th
BTS might use the timer to reset the HSDPA retransmission of the associated MAC-
PS ThisPDUs.
ehs parameter defines how long an uplink capacity request can stay in the queue befo
PS This parameter defines together with the RNP parameters
PS DCHUtilUpperDowngradeThrBitRate
This parameter defines the sliding measurement and DCHUtilLowerDowngradeThrBitRate
window size for the high throughput the
upper and
measurement lower downgrade thresholds for the upper and lower throughput
PS This parameterindefines
measurements.
uplink and downlink NRT
the threshold for the dedicated
high throughput channels. The high throughput
measurement.
measurement measures the number of received/sent bits in UL/DL NRT DCH during
PS Thissliding
the parameter defines the
measurement time allowed
window period. to
Theelapse between the
measurement window moment size the when
is commonthe throug
The threshold below the downgradeNRT DCH rate data rate
is defined is defined
as % down as %from down from
upper/lower NRT
target
PS for
This
DCH all NRT
parameter
data rate.DCH data rates.
defines the lower sliding measurement window size for the NRT DCH
downgrade bit rate.
PS whose
This allocated
parameter user plane
defines data rate
the lower sliding is 128 kbps. The lower
measurement window throughput
size
The special
measurement
The value value
window
is common 0 meansis
for all usedthat
NRT in high
the throughput
lower
DCHisand data throughput
rates. measurementmeasurement. is notfor the NRT DCH
active.
The lower
whose allocated user plane bothdata "upper"
rate 256 "lower"
kbps. throughput
The lower measurements
throughput and for
PS This parameter
throughput defines themeasures
measurement lower sliding the measurement window size bitsfor inthe NRTNRT DCH
following NRT
measurement DCH bit isrates:
window used 32
in kbps,
the lower64number
kbps,
throughput of received/sent
128 kbps, 256 kbps,
measurement. and
The UL/DL
384
lower kbps.
PS whose
DCH
Example:
This allocated
during The
parameter the user
sliding
allocated plane
defines themeasuresNRT data
measurement DCH rate
lower sliding data is 32
window
rate kbps.
is
measurement 128The
period. kbpslower and
window sizethroughput
the threshold
for measurement
below the
throughput
window measurement
is used inuser
the lower throughput themeasurement.
number of received/sent
The lower bits inthe
throughput UL/DL NRTNRT DCH
NRT
whose DCH
Example:
DCH during data
allocated
The rate
allocated
themeasures is 4%.
plane NRT
sliding measurement Sodata the threshold
rate
DCHsliding is
bit window
rate384 for
kbps.
is 384 the high
The
kbps and
period. throughput
lower throughput
if thesize upper measurement
downgrade isbit
PS This special
The parameter
measurement value defines
0 oflower the
this the lower
number
parameter of measurement
received/sent
means that thekbps window
bits
lower inthroughput
UL/DL NRT for measurement
theDCH NRT DCH
during
(128
rate kbps
measurement
is 256 -kbps,
128 kbps*4/100)
window the is used ~123
in
downgrade the kbps.
lowerbit throughput
rate is 64 measurement.
and the The
threshold lower
below
whose
the
is allocated
sliding
not actived measurement
for user
the plane datawhose
window rate
period. isallocated
64 kbps.user Thedata lower throughput measurement
PS This
The
window
parameter
throughput
downgrade
special
is usedvalue defines
measurement
bit rate
in 0 isofNRT
the 4%. the
this
lower
DCH
Sotarget
measures lower
the downgrade
parameter
throughput themeansdowngrade
number upper
that
measurement. oflower plane
threshold rate
received/sent bitfor
throughput
The lowerforratethe
the isNRT
bits 128
in
upper
measurement
throughput
kbps.NRT
DCH
UL/DL is
PS whose
DCH
throughput
not
This allocated
during
actived
parameter the
measurement
for the user
sliding
NRT
defines planeDCH
the is data
measurement
(256
whose
target rate
kbps
lower is 128
window
- 256
allocated kbps.
downgrade period.
kbps*4/100)
user plane
data ~246
bit
rate rate kbpsis and
256
for themeasurement
NRTDCH the
kbps.
DCHduring
measurement
The
NOTE: special measures
value 0 of this the number
parameter of received/sent
means that lower bits in UL/DL
throughput NRT is
downgrade
whose
the sliding loweruser
allocated
measurement threshold
plane for
data
window theratelower
period. is throughput
256 kbps. measurement is (64 kbps - 64
PS not
With
This active for
the aggressive
parameter the NRT
defines DCHthe
settings, whose
target allocated
lower
the measured downgradeuser
bit rate plane bit
datathroughput
over 6rate rate is
for thethe
sdefines 32 kbps.
NRT bit DCH
The special
kbps*4/100)
NOTE: ~61together
value 0 of
kbps. this with DCHutilBelowDowngradeThr
parameter means that lower measurement rate is
PS whose
threshold
not
This allocated
(DCHUtilUpperAveWin128
actived that
parameter for is
the user
usedNRT
defines plane
in the
DCH
the data
plus
lower
whose
target rate
lower is
throughput 32
allocated kbps.
DCHUtilUpperTimeToTrigger128)
downgrade measurement
user plane bit
datathroughput for
rate theisneeds
NRT
384 to
DCH
kbps. be below
whose
With
The the aggressive
special together settings, with the measured
DCHUtilBelowDowngradeThr bit rate over 6rate for themeasurement
sdefines theNRT bit DCH
rate
NOTE:
the
whoseupper
allocated bitvalue
user
allocated
(DCHUtilUpperAveWin256rate
plane 0 of
threshold
user
this
data
plane
parameter
(defined
rate
data
plus by means
is the
that
parameters
isDCHUtilUpperTimeToTrigger256)
128
rate kbps. 384 kbps.
lower
needs to be
is
below
PS threshold
not
This
With actived that
parameter for
the aggressive is
the usedNRT
defines
together in the
DCH
the
settings, lower
whose
target throughput
lower
the measured allocated
with DCHUtilBelowDowngradeThr downgrade measurement
user plane
data
bit rate over 6 sdefines bit
rate for
rate
for theis
the NRT
64 NRT
the DCH
kbps. DCH
bit rate whose
DCHUtilUpperDowngradeThr128
NOTE:
the upper bit rate threshold (defined andbyDCHUtilBelowDowngradeThr)
the parameters before the bit
allocated
whose
plus
threshold user
allocated
that plane
is user
used data
plane
in therate
data is 256
lower rate kbps.
is the
needs
throughput 64 kbps.
to be below
measurement the upper
for the bit
NRT rate DCHthreshold
whose
PS rate
The
This
With is decreased
allocated
parameter
the aggressive data
DCHUtilUpperDowngradeThr256 to
definesrate
together the target
corresponds
the
settings, period upper of
the measured downgrade
to
the
with DCHUtilBelowDowngradeThr timehighest bit
between rate
bit rate (defined
timing
bit rate over 6 sdefines the
and DCHUtilBelowDowngradeThr) in the
of theby
TFS the
lowerfromparameter
which
the bitthe
throughput
bit rate
before
NOTE:
(defined
allocated byusertheplaneparameters
DCHUtilUpperDowngradeThr128),
TFCS is constructed. data DCHUtilUpperDowngradeThr32
rate is 32 kbps.
while the measured bit rateandover 3.4 s
threshold
rate
The is that data
decreased
allocated isdefines
used
toratetheinthe the plus
target lower
corresponds DCHUtilUpperTimeToTrigger384)
upper throughput
downgrade
to measurement
thebithighest bit rate (definedfor the needs
NRT
bythethe to
DCH be
parameter below
whose
PS This
With parameter
the aggressive
DCHUtilBelowDowngradeThr)
(DCUutilLowerAveWin128
the upper bit rate
together settings,
threshold
withperiod
plus the between
measured
before
(defined the timing
bit
rate
DCHUtilLowerTimeToTrigger128)
by the parametersisofbit
rate overrate
the
decreased sin
lower
6 the
definesto TFS
throughput
the
needs
from
bit
targetto
which
goes
rate
upper
be below
the t
below
allocated
TFCS
plus is user
constructed.plane
threshold that israte
used data
inthe rate
the(definedis
lower 384 kbps.
whileneeds
throughput the measured
to be below
measurement bit
the rateupper over 3.4
bit rates threshold
PS downgrade
The
the
This allocated
lower bit
parameter bit data
rate (defined
rate
threshold
defines by
corresponds
period theand parameter
of byto
the the
thetimeparameters
between timing infor
highest bit rate of the
the TFS
the NRT
lowerfrom DCH whose
which while
the
(DCHUtilLowerAveWin256
(defined
allocated
the measuredbyuserthebit parameters
plane rate data
over plus
rate
3.4 is
s 64 kbps.
(DCHUtilLowerAveWin32 plusand needs before tothroughput
thebelow
be bit
TFCS
rate
The is is constructed.
DCHUtilLowerDowngradeThr128
decreased
allocated data toratethe the target
corresponds upperand to DCHUtilBelowDowngradeThr)
downgrade
the highest bit rate
bit rate (defined
in the in
by lower
TFS the order
from to
parameter
which be
PS the
This lower bit rate
parameter
decreased
threshold
defines
to the target lower downgrade
(defined
period before ofwith
needs the
thetothe
time
bit parameters
be rate
bit
between
below
rate is the timing
decreased
(defined lower by
oftothe
bit
the the
rate target
threshold
parameter upper the
throughput
TFCS
downgradeis constructed.
bitdatarate (defined by the of andwhile the measured
parameter bit rate
DCHUtilUpperDowngradeThr64), over 3.4
in s
order to be
while
PS The
This allocated
(defined by the
parameter rate
parameters
defines
DCHUtilLowerDowngradeThr128). corresponds
the to
thethe
period timehighest
between bit rate
timing inandthe
of the TFS lowerfromthroughput
which the
decreased
the measured to the target
bit rate over 3.4 in lower plus DCHUtilLowerTimeToTrigger384)
downgrade bit
s (DCHUtilLowerAveWin64 rate (defined by the needs
parameter
plustarget lower to be below
TFCS is constructed.
DCHUtilBelowDowngradeThr) order to be decreased to the
PS the
This lower bit ratedefines
parameter
DCHUtilLowerDowngradeThr256).
DCHUtilLowerTimeToTrigger64) threshold the (defined
period ofby
needs time the
to be parameters
duringbelow which downgrading
the thresholds),
lower bit ratethe the allocated
threshold
downgrade
With these bit rateparameter
default
DCHUtilLowerDowngradeThr384 (defined bysettings the andparameter
(this and DCHUtilLowerDowngradeThr32).
bit rate
DCHUtilBelowDowngradeThr) in slow start
order to be
PS DCH
(defined
This bit rate
by the
parameter of the NRT
parameters
defines RB is denied due
DCHUtilLowerDowngradeThr64 to throughput measurements.
andsize for the NRT
issue
With should
decreased
these to not
the
default be
targetanythe
parameter
upper
problem.
lower settings
sliding measurement window
downgrade (this bit
and rate bit(defined
rate by
thresholds), the parameter
the slow start
DCH
whose
With allocated
these default user plane
parameter data in order
rate
settings isto128
(this beand decreased
kbps. bit The
rate to thethroughput
upper
thresholds), targetthe lowerslow start
PS This
Guard
issue parameter
timerbit
should isnot defines
started
be any ifisthe bitupper
aproblem. rate slidingthan
other measurement
DCH 0/0 kbps window size for for
is allocated thetheNRT NRT DCH
downgrade
measurement
issue should not rate
windowbe(defined
any used by
problem. inthe
the parameter
upper DCHUtilLowerDowngradeThr64).
throughput measurement. The upper
PS whose
RB.
This Guardallocated
parameter timer user
defines plane
is restarted data rate
whensliding
themeasures
upper the isNRT256 kbps.
DCHof
measurement The upper
bitreceived/sent
ratewindow throughput
is downgraded size or upgraded.
throughput
measurement measurement
window is used in the the
upper number
throughput measurement. bitsfor in
The
the
UL/DL NRT
upper NRTDCH
With
whose
With these
these default
allocated
default userparameter
plane
parameter datasettings
rate
settings (this
is 32
(this and
kbps.
and bit
The
bit rate
rate thresholds),
upper
thresholds),throughput the
the slow start
measurement
slow start
PS DCH
This duringmeasurement
parameter
throughput the defines
sliding measurement
themeasures
upper sliding thewindow
number period.
measurement window size
of received/sent bits forin the
UL/DL NRT NRTDCH
issue
window
issue should
is used
should not be
notinuser
be the a
anyproblem.
upper problem.throughput measurement. The upper throughput
PS whose
DCH
This allocated
during themeasures
parameter defines plane
sliding measurement
the data
upper rate
sliding is 384
window kbps. The
period. bits
measurement upper
window throughput
sizemeasurement
for the NRT DCH
measurement
The special
measurement value
window 0 of is this the number
parameter
used in the of received/sent
means
upper that lower
throughput in UL/DL
throughput
measurement. NRT The DCHupperduring
is
PS whose
the
not
This allocated
sliding
actived
parameter measurement
for the user
NRT
defines planeDCH
the data
window whose
target rate
period.
upper is 64
allocated kbps.
downgrade user The upper
plane
data bit
rate throughput
rate
for is
the 128 NRT measurement
kbps.DCH
throughput
The
windowspecial measurement
is used value 0
inuser
the thismeasures
of upper parameter
throughput themeansnumber thatoflower
measurement. received/sent upperbits
throughput
The in UL/DL NRT
measurement
throughput is
PS whose
DCH
not
This allocated
during
actived
parameter the
for thesliding
NRT
defines planethe data
measurement
DCH whose
target rate
upper is 128
window
allocated kbps.
downgrade period.
user plane
data bit
rate rate
for is
the 256 NRT kbps.DCH
measurement
The
NOTE: special value measures 0 of this the number of
parameter received/sent
means that lower bits in UL/DL measurement
throughput NRT DCH during is
PS whose
the
not
This allocated
sliding
actived
for the user
NRT
defines planeDCH
the data
window whose
target rate
period.
upper is 256
allocated kbps.
downgrade user plane
data bit
rate rate
for is
the 32 NRTkbps. DCH
With
The
NOTE: the aggressive
special value together settings,
0 of this with the
parameter measured
parameter bit rate over
meansDCHUtilBelowDowngradeThr 6 s
that lower throughput measurement defines is the
PS whose
bit
not
Thisrate allocated
threshold
actived
parameter for the user
that
NRT
defines plane
is used
DCH
the data
plus in
whose
target rate
the upper is 32
upper
allocated kbps.
throughput
downgrade user planemeasurement
data bit
rate rate
for isneeds
the for
384 NRT toDCH
the
kbps. be
NRT below
DCH
With
The the
special aggressive together settings, with the measured
parameter bit rate over
DCHUtilBelowDowngradeThr6 s defines is the
NOTE:
the
whose
whoseupper bitvalue
allocated
allocated
(DCHUtilUpperAveWin256rateuser 0 ofplane
threshold
user
this
plane
parameter
(defined
data
data
plus rate
rate by means
is the
is 128
384
that lower throughput measurement
parameters
kbps.
kbps.
DCHUtilUpperTimeToTrigger256) needs toDCH
be below
PS bit
not
This
Withrate threshold
actived
parameter
the for
aggressive the that
NRT
defines is used
DCH
the
settings,
parameter, together with the and in
whose
target
the the upper
upperallocated
measured
parameter throughput
downgrade
bit user
rate planemeasurement
data
over 6
DCHUtilBelowDowngradeThr,bit
rate
s rate
for is
the 64for
NRT
(DCHUtilUpperAveWin32 the
kbps. NRT DCH
NOTE:
the upper bit rateuser threshold (defined by DCHUtilBelowDowngradeThr)
the parameters beforedefinesthe bit
whose
whose
plus
the bit allocated
allocated
rate threshold user
DCHUtilUpperTimeToTrigger32) plane
plane
that is data
data
used rate
rate
in the is 256
is the
needs 64
upper kbps.
kbps.
to be below
throughput the upper
measurement bitupper
rate for threshold
the NRT
PS rate
The
This
With is decreased
allocated
parameter
the aggressivedata
DCHUtilUpperDowngradeThr256 to
definesratethe target
corresponds
the
settings,
together with period upper
the of
measureddowngrade
to
the
parameter timehighest
bit bit
between
rate rate
bit
overrate (defined
timing
and DCHUtilBelowDowngradeThr) 6 sin the
of theby
TFS the fromparameter
which
the bitthe
throughput
beforedefines the
NOTE:
(defined
DCH whoseby the parameters
allocated
TFCS is constructed. user DCHUtilUpperDowngradeThr32
plane data
while ratethe is 32
measuredkbps. bit rateand over 3.4 s
PS (DCHUtilUpperAveWin384
bit
rate
The
This
Withrate
is threshold
decreased
allocated
parameter
the aggressivedata that
to
definesrate is
the used plus
target
corresponds
the
settings, in
period
the DCHUtilUpperTimeToTrigger384)
the
upper of upper
measureddowngrade
to
the the throughput
timehighest
bit bit
between
rate bit
overmeasurement
rate
rate (defined
timing
6 sin the
of needs
by
TFS
the for
the
upper
(DCHUtilUpperAveWin64from tothroughput
the be
NRT
parameter
whichbelow
DCH
the
(DCHUtilLowerAveWin128 together with plus parameter
before DCHUtilBelowDowngradeThr
the bitparameters
rate is decreased to the
DCHUtilLowerTimeToTrigger128) needs target defines
upper the
the
whose
bit
upper bit rateuser
isallocated
TFCS
plus constructed. threshold
rate
downgrade threshold
bit rate that plane (defined
data
is corresponds
(defined used by inthe rate
the
by
while is the
needs
upper
parameter
384
the kbps.
measured
to be below
throughput bit
the rate
measurement
DCHUtilUpperDowngradeThr32),upper over bit3.4
forratestothreshold
the
be below
NRTwhileDCH
The
the allocated
lower bit data
rate
DCHUtilUpperDowngradeThr384 rate
threshold (defined byto the
the highest
parameters
and DCHUtilBelowDowngradeThr) bit rate in the TFS from
before which
thebelowthe
bit
(defined
whose
the measuredby thebit
allocated parameters
user
rate plane
over plus
data
3.4 sDCHUtilLowerTimeToTrigger256)
rate is 64 kbps.
(DCHUtilLowerAveWin32 plusand needs to be
TFCS
rate
The is is constructed.
decreased
allocated data toratethe target
corresponds upperand to DCHUtilBelowDowngradeThr)
downgrade
the highest bit rate
bit rate (defined
in the by
TFS infrom
the order to bethe
parameter
which
the lower bit rate
DCHUtilLowerTimeToTrigger32) threshold (definedbefore
needs by thethe bit
tothe parameters
be rate
below is decreased
the bit
lower bittorate
the target
threshold upper
decreased to the target lower downgrade
DCHUtilLowerDowngradeThr256 while bit rate
measured (defined by
ratethe overparameter
3.4 s
downgrade
The allocated
(defined by bitdata
the rate (defined
rate
parameters
DCHUtilLowerDowngradeThr128). by theand
corresponds toDCHUtilBelowDowngradeThr)
parameterthe highest
DCHUtilLowerDowngradeThr32 DCHUtilUpperDowngradeThr64),
bit rate inand the TFSinfrom order to be
which while
the
decreased
the measured to the
bit target
rate over lower plus
3.4 s DCHUtilLowerTimeToTrigger384)
downgrade bit
(DCHUtilLowerAveWin64 rate (defined by
plus the needs to be below
parameter
DCHUtilBelowDowngradeThr) in order to be decreased to the target lower
the lower bit rate threshold (defined
DCHUtilLowerTimeToTrigger64) needs by the to be parameters
below the thresholds),
lower bit ratethe threshold
downgrade
With bit rateparameter
these default
DCHUtilLowerDowngradeThr384 (defined bysettings the andparameter
(this and DCHUtilLowerDowngradeThr32).
bit rate
DCHUtilBelowDowngradeThr) slow start
in order to be
(defined
issue by
should thenot parameters
be any DCHUtilLowerDowngradeThr64
problem. and
decreased
With these to the
default target
parameter lower downgrade
settings
DCHUtilBelowDowngradeThr) in order to be decreased to the target lower (this bit
and rate bit(defined
rate by
thresholds), the parameter
the slow start
PS This parameter defines the period of the time between timing of the upper throughput
PS The parameter determines a period of time during which a downgrade due to
PS Dynamic Link Optimisation
The parameter is notthe
is used to define allowed.
DL transmission power level that triggers the
PS dynamic
This link optimisation.
NRT parameter
user bitratedefines a factor that due
is not downgraded determines
to Dynamic the minimum
Link Optimisation time between proceduretwo
PS consecutive
during
This the
parameter priority-based
guard time
defines period scheduling
whether after a operations
successful related
upgrade of to a a certain
user bitrateDCH. or After
allocationDCH
The value
downgrade defines
due to apriority-based
power level HS-RACH/FACH
relative
scheduling, to thethe maximumin Cell_FACH
minimum DL DCH
state or dedicated
transmission
allocation power
time is
of a DCH
resource
(Ptx,max). greater
(DCH/HSPA)
Dynamic than 0 kbps.
linkinthe Cell_DCH
optimisationSuccessive
state downgrades
is preferred thefor due to
HS-RACH Dynamic capable LinkRLUEFlow in
PS This parameter
determined
Optimisation
Data Session byare defines
multiplying
also
profiling the
prohibited
feature.
HSDPAvalue
By duringofisthe
Discard
default
triggered
this RNPTimer
period
dedicated
if value
parameter measured
ofresource
time. for the Commonaverage
PBSgrantedMinDCHallocT
in Cell_DCH
MAC
state is
transmission
Priority
with this Queues power (Ptx,average)
transmitting
factor. indicates DTCH added to
data on HS-FACH. the value of the
Discard parameter
Timer exceeds
defines the
the time
PS This
maximum parameter
preferred. DL transmission the delayOnly
power. between the two consecutive
cells under the SRNC PS NRTcan DCH
trigger dynamic
to live
downgrade for a MAC-ehs
procedures SDU starting
forHS-RACH
Inter Circle from the
Roaming instant of its arrival in an HSDPA Priority
PS If enabled,
link
This
Queue.optimisation.
parameter RNC will allow
defines whether capable
inactivity detectionUEfeature.
to for ICR Downgrade
usestreaming
HS-RACH/FACH radiodepends Delay
channels
bearers timer
is in
Which
indicates
Cell_FACH of the
the three
delay
state for parameters
between
next UE (higher,
starting
initiated an equal
data PS NRT or
session. lower
DCH This priority)
downgrade
is done is used
by procedure
allocating on
after
E- the
and
activated.
The
whetherBTSthe If inactivity
can RABuse of ithow
as
thedetection
delay
DCHinformation
to isbeactivated,
released for then
guiding thethe
orisdowngraded system can arelease
scheduling.
has higher, resources
equal or
PS Parameter
previous
H-RNTI PS
for defines
UE NRT forDCH Cell_PCH users
downgrade over
state. Iur-interface
procedure are handled
completed. in the
The DriftisRNC
timer started during
used
lower by the
priority inactive
than the streaming
RAB of radio
the bearer.
incoming If resources
capacity request. of a radio
During bearer
this are the
time,
congestion.
immediately
If disabled, Drift
after
RNC RNC
a PS
will to distinguishes
NRT
handle DCH
HS-RACH users
downgrade over
capable Iur-interface
procedure
UE asnew is
legacy when
complete
UEused RT-over-RT,
and
andwill notathe RT-
next
allocate PS
E-
PS This
released
DCH parameter
is not andallowed defines
a need to be the threshold
transfer
released dataor fordetected,
is NRT data
downgraded amount
then
due to to be
resources
priority-based as be basis for
scheduling.
over-NRT,
NRT DCH
and H-RNTI fora UE pre-emption
downgrade or
can
forsession overload
be
Cell_PCH started actions
state. only are
upon
RNC session) performed.
the
will transfer ICR Parameter
Downgrade
the UE directly is
Delay applicable
Timer
to Cell_DCH to
PS distinguishing
reserved.
The
This same
parameter factor data
isDrift
definesused when
the (web
validity browsing
thesession
priority
time forof this and
identified DCH's from
data RAB keepis
session alive
higher,
(webLink Ping
equal
browsing or lower
DCH
expiry.
state users
when when
next UE RNC
initiated performs
data Radio Link
starts Congestion
profiling or Radio
conditions are Pre-
met.
messages.
than the procedures
session). RAB When
During of the
thetheincoming
NRT data
validity time amount
capacity exceeds
UE willrequest.be changed the threshold
from Cell_PCH defined to in this
Cell_DCH,
PS emption
The parameter determines over Iur-interface.
the increased TVM pending time during high load foristhe
parameter,
Releasing
when UEs next data
of session
resources is identified
reserved for by RNC.
streaming radio bearer can cause that UE putMass Event Hand
If the value of thedata sessionisstarts
parameter set toon"EqualCell/URA_PCHPriority", Drift state. RNC That nextIur
treats data userssession
and
PS Minimum
to
This
may CELL_FACH
parameter
consist value: suitable
state
defines
of any kind fordata,
if there
priority
of small
are fornodata
Radio
even aamounts
other active
Access
small radio
Bearers
activity, bearers.
e.g. keepofIfalive
having there
Traffic are
Class
message. someWhen
Drift
If theRNChigh users
load according
state to their
is detected existing
based on QoS
the priorities.
average length the NRT scheduling
Maximum
other
Background
the active
validity value:
radio
with suitable
bearers
Allocation for
for high
and this data
UE,
Retention amounts
then streaming
priority 1. radio bearer is put to DCH 0/0. queue, the increa
PS If the
This value time
parameter of the has
defines expired
parameter priority statesetchange
is for to "Higher
Radio to Cell_FACH
Access PriorityBearers overor Cell_DCH
Iur",
having Drift RNC
Traffic state is based
gives
Class Iur
Default
on TVI value:
as legacy. suitable for moderate data amounts
users
Background
The higher
longer priority
with
"Pending than Drift
Allocation and RNC users.
Retention priority 2.
PS Inactivity
This ofdetection
parameter definesis time
used after
for when
priority trigger"
streaming and "Tx
radio interruption
bearer is after Traffic
mapped trigger"
to High prevents
isSpeed UE
or from sending fre
Inthe
If case
Minimum value High
value:
of the Speed
suitable
parameter(HS-DSCH is for
fast Radio
or
subsequent
set "Lower Access
to E-DCH+HS-DSCH) data
Priority Bearers
sessions. having
over channels,
Iur",HighDriftprobability
RNC Class
priority gives directly
thatIurdata
DCH
used transport
Background
as with
Scheduling channels.
Allocation
Priority and Retention priority 3.
PS session
users
This
In case
Increased lowerprofiling
parameter
of priority
High
TVM is not
defines
Speed
pending than DriftIndication
applied
Scheduling
(HS-DSCH
time RNC
defined users.
or (SPI) value.
Priority
by thisIndication
E-DCH+HS-DSCH) parameter (SPI) for conversational
ischannels,
used onlypriority
if the value type
is directly
is longer than the valu
Maximum
Radio Access
usedparameter value:
as Scheduling suitable
Bearers that
Priority forareslow subsequent
mapped
Indication to
(SPI) E-DCH
value.data sessions
and/or HS-DSCH transport
PS This
In case value: defines
Highsuitable
of Dedicated Speedchannels priority
(HS-DSCH for
(DCH),DTCH data
or E-DCH+HS-DSCH)
priority traffic
is just valueon HS-FACH
channels,
0sessions
- 11 for PS RBs.
priority is directly
Default
channels.
Functionality is switched for moderately
on/off by the fast subsequent
WCEL-MassEventHandler data parameter.
PS used
(0
Thisis as Scheduling
the
parameterlowest and
defines Priority
11 the Indication
highest
priority for (SPI)
priority).
Radio Access value. Bearers having Traffic Class
In
In case
case of of Dedicated
High Speedchannels (HS-DSCH (DCH) orto priority is just value channels
E-DCH+HS-DSCH) 0 - 11 on HS-FACH,
PS Interactive
This
(0
This priority
is the
parameter and
lowest is having
used
and
defines 11 been
insidethe RAN marked
highest
priority when be
resources
priority).
for Radio used
Access in signalling
related
Bearers to this
having purposes
kind (RANAP
Traffic ClassAccess
of Radio
priority
In
Thiscase isof
priority
Signalling directly
Dedicated
is used
Indication used inside
IE). as
channels Scheduling
RAN(DCH) when Priority
priority
resources Indication
is just value
related (SPI)
to0this - 11 value.
kind of Radio Access
Bearer
Interactive are handled.
with traffic
PS (0
Thisis the
Bearer parameter
arelowest
handled.and
defines 11handling
the highest
priority priority 1 and
priority).
for Radio Access AllocationBearers and Retention
having Trafficpriority
Class 1.
This priority is used inside RAN when resources related to this kind of Radio Access
Interactive
In with traffic handling
priority priority 1 and Allocation and Retention priority is 2.
PS In case
This
Bearer
Thiscase of
of High
parameter
are
priority handled.
High Speed
defines
Speed
is used
(HS-DSCH
(HS-DSCH
inside RAN when
or
or E-DCH+HS-DSCH)
for Radio Access
E-DCH+HS-DSCH)
resources
Bearers channels,
having
related tochannels,
priority
Traffic
this kind priority
Class
of RadioisAccess
directly
directly
used
used as
Interactive
as Scheduling
with traffic
Scheduling Priority
handling
Priority Indication
priority
Indication (SPI)
1 and
(SPI) value.
Allocation
value. and Retention priority 3.
PS This
Bearer parameter
are handled.defines priority for Radio Access
In case of High Speed (HS-DSCH or E-DCH+HS-DSCH) channels, priority is directly Bearers having Traffic Class
Interactive
used
In asof with traffic
Scheduling handling
Priority priority
Indication 2priority
and
(SPI) Allocation
PS In case
Thiscaseparameter
of Dedicated
High
Dedicateddefines
Speed channels
priority
(HS-DSCH
channels (DCH),
for Radio
(DCH) Access
or E-DCH+HS-DSCH)
priority isisjust
just
Bearersvalue
value 00--11
having
channels,12 Traffic Class
(0
used
(0 is
is the
Interactive
asof
the lowest
Scheduling
lowest and
with traffic
and 12 the highest
handling
Priority
11 the highest
Indication priority).
priority 2 and
(SPI)
priority). Allocation
PS This
In case parameter High
Dedicateddefines
Speed priority
(HS-DSCH
channels for Radio
(DCH) or Access
E-DCH+HS-DSCH)
priority is just Bearers having
0 - 11 Traffic
value channels, Class
PS Interactive
used
(0 asof
is the
parameter with traffic
Scheduling
lowest and
defines 11 handling
Priority
the highest
priority priority
Indication
for 2 and
(SPI)
priority).
Radio Access Allocation
value. Bearers and Retention
having Traffic priority
Class 3.
This
In
Thiscasepriority
priority is
is used
High
DedicatedSpeed
used inside RAN
(HS-DSCH
channels
inside RAN(DCH) when
whenor resources
E-DCH+HS-DSCH)
priority
resources is just related
valueto
related 0this
- 11kind
tochannels,
this of
of Radio
kind priority RadioisAccess
directly
Access
PS Interactive
Bearer
used
(0
Thisis as
the are
parameter with
handled.
Scheduling
lowest traffic
and
defines 11 handling
Priority
the highest
priority priority
Indication
for 3 and
(SPI)
priority).
Class 1.
Bearer
In case
This are
priority handled.
of High
DedicatedSpeed
is used (HS-DSCH
channels
inside RAN(DCH) whenor E-DCH+HS-DSCH)
priority
resources is just valuetochannels,
related - 11kind priority
0this of RadioisAccess directly
PS Interactive
used
(0
Thisis as
the
parameter with traffic
Scheduling
lowest and
defines 11 handling
Priority
the highest
priority priority
Indication
for 3 and
(SPI)
priority).
Class 2.
Bearer
In
Thiscase
Signalling are
priorityof is handled.
High
Dedicated
is Speed
defined
used to (HS-DSCH
higher
channels
inside RAN level
(DCH)
whenorofE-DCH+HS-DSCH)
priority
resources than
is just other
valueto
related channels,
NRT0this
- 11 kind priority
RABs. ofThis
Radiois isdone
directly
Access in a
PS Interactive
used
way
(0
This asare
is that
the
parameter with
Scheduling
new
lowest RTtraffic
and PS11
defines handling
Priority
RABsthe highest
priority priority
Indication
cannot for take 3 resources
priority).
SRBs and
(SPI)on Allocation
value.
E-DCH ofand and
signalling
SRBs Retention
RABs
on HS-DSCH.priority
and 3. way
inisthis
Bearer
In
Thiscasepriorityof handled.
High
DedicatedSpeed
is used (HS-DSCH
channels RAN(DCH) or E-DCH+HS-DSCH)
when priority is just channels,
valueto0this priority
- 11kind of Radio Access directly
harm
used theScheduling
as existing RTinsidePS RABs.
Priority Indication
resources
(SPI) value.
related
PS (0
Thisis the
Bearer
In caseparameter
arelowest
of handled.
High and
defines
Speed 11 the highest
priority
(HS-DSCH for priority).
Radio
or Access
E-DCH+HS-DSCH) Bearers having
channels, Traffic Class directly
priority
This
In casepriorityof Dedicated
is used
High Speed channels
inside RAN(DCH)
(HS-DSCH when priority
resources
or E-DCH+HS-DSCH) is just valuetochannels,
related 0this
- 11kind of Radiois
priority isAccess
directly
PS Streaming
used
(0
Thisis as
the
parameter and
Scheduling
lowest Allocation
and
defines Priority
11 the and
highest
priority Retention
Indication
for priority).
Radio Priority
(SPI)Access value. 1.Bearers having Traffic Class
Bearer
used
In
Thiscase as are
priority handled.
Scheduling
of Dedicated
is used inside Priority
channels Indication
RAN(DCH) (SPI)
when priority
resources value.
is just valueto0this
related - 11kind of Radio Access
PS Streaming
(0
Thisis the
parameter and Allocation
lowest and
defines 11 the and
highest
priority Retention
priority).
for Radio Priority
Access 2.Bearers having Traffic Class
Bearer
In case are
of handled.
High
DedicatedSpeed (HS-DSCH
channels (DCH) or E-DCH+HS-DSCH)
priority is just valueto channels, priority is directly
This
This priority
priority
Streaming
used as
is
is
and
Scheduling
used
used
Allocation
inside
inside
Priority
RAN
RAN
and
when
when
Retention
Indication
resources
resources
Priority
(SPI) value. 3.
related
related to0this - 11kind
this kind of of Radio
SRBs Accessare
PS (0
Thisis the
Bearer
In caseparameter
arelowest
of handled.
High and
defines
Speed 11 time
the
thehighest
(HS-DSCH highest priority).
priority
or usedthe
E-DCH+HS-DSCH) by PS NRT RAB that
channels, can be used as are reserved for
handled.
Parameter
This priority defines
is used the
inside indicating
RAN when how
resources long radio
related toand kind priority
thistransmission of Radio isAccess
directly
resources
PS a target
used
This as for
parameter RT-over-NRT
Scheduling defines Priority functionality
Indication
the highest when
(SPI) streaming
value. PS RAB with Allocation and as
Bearer
In
Thiscase are
priority
Retention
handled.
of Priority
High
DedicatedSpeed
is used (HS-DSCH
channels
inside
(ARP) 1 RAN(DCH)
needs whenorpriority
resourcespriority
resources
used
E-DCH+HS-DSCH) in isRAB by PS
just value
related
NRT -RAB
tochannels,
0this
establishment 13kind that can be
priority
of Radio
phase. PS
used
isAccess
directly
NRT
This
a
used
(0 parameter
targetas
is the for
Scheduling
lowest defines
RT-over-NRT
and the
Priority
13 the value
functionality
Indication
highest for each
when
(SPI)
priority). DCH streaming
value. bit ratePS in downlink
RAB withand uplink. and
Allocation The parameter is applie
PS This
Bearer
RABs
In caseparameter
are
with of handled.
higher
Dedicateddefines
priority the
channels highest
cannot be
(DCH), priority
used asused
priority a is by PS
target
just forNRT
value 0 RAB- 13 that
RT-over-NRT can be used as
actions.
Retention
Inactivity
a target for Priority
Timer for
RT-over-NRT (ARP)
Legacy 2 needs
Fast resources
Dormancy
functionality whenSmart in RAB
streaming establishment
phones PSinRAB Cell_FACH phase.
with Allocation PS
is usedandNRT on MAC -c to detect th
PS (0
RABsis the
Parameter with lowest
value
higher and255 13
priority thecannot
means highest
that be priority).
LFD used Smartphone
as in a is target specific DCH
for RT-over-NRT inactivity timers are not used.
In
Thiscasepriority
Retention
This of
parameter Dedicated
is used
Priority has (ARP)
nochannels
inside RAN
3 needs
effect in(DCH),
when
resources
cases priority
resources
where RAB just
resourcesrelatedvalue to 0this
establishment
are - 13
tried kind of actions.
tophase.
be Radio PSAccess
reserved NRT for
PS (0
RABsis parameter
Bearer
The
existingthe are
with lowest
handled.
higher
streaming and
is 13RAB
applied
priority
PS thecannot
highest
toRAN
.the Rel5 bepriority).
UEs,
used as which
a target go to foridle statekind
RT-over-NRT after sending
actions. SCRI without cause and
This priority is used inside when resources
This parameter has no effect in cases where resources are tried to be reserved for related to this of Radio Access
PS This
Bearer
existingparameter
are handled.
streaming definesPS the threshold of data in the RLC buffer of RB in bytes which
This
This
triggers
priority
parameter
downlink
is used
has noRAB
inside
traffic effect
volume
. in cases
RAN when resources
to measurement
overload where control.resources
report
related are to this
(capacity tried kind
to be
request)
of Radio
reserved
on MAC,
Accessfor
PS This
Bearer
existingparameter
are handled.
streaming definesPS the
RAB threshold
. of data in the RLC buffer of RB in bytes which t
when the UE is has
This parameter in a no Cell_DCH
effect tostate overloadand bit rate higher than 16 kbps is allocated for
control.
PS Thisradio
the parameter bearer.defines the threshold of data in the RLC buffer of RB in bytes which t
This parameter has no effect to overload control.
PS This parameter defines the threshold of data in the RLC buffer of RB in bytes which t
Note: If flexible upgrade of NRT DCH data rate is activated by the FlexUpgrUsage
PS This parameter
parameter, defines the
the threshold of threshold
data in RLC of data
bufferinofthe RBRLC bufferisofdefined
in bytes RB in bytesby thewhich t
TrafVolThresholdDLHighBitRate parameter instead of this parameter if the allocated
DCH bit rate is below the maximum bit rate of the radio bearer.
The high threshold of the 16 and 8 kbps DCH is fixed:

- 512 bytes for the RB whose NRT DCH bit rate is 8 kbps.
- 512 bytes for the RB whose NRT DCH bit rate is 16 kbps.
PS The parameter defines the threshold of data in RLC buffer of RB in bytes. This
PS threshold triggers
The parameter the uplink
defines traffic volume
the threshold of datameasurement
in RLC bufferreport
of RBwhen the UE
in bytes. is thresho
This in a
Cell_DCH state and bit rate higher than 16 kbps is allocated for the radio bearer.
PS The parameter defines the threshold of data in RLC buffer of RB in bytes. This thresho
PS The
The parameter
parameter is sent tothe
defines thethreshold
UE usingofthe RRC:
data MEASUREMENT
in RLC buffer of RB in CONTROL
bytes. This thresho
message.
PS Note:parameter
The If flexible defines
upgradethe of NRT DCHof
threshold data rate
data is activated
in RLC byRB
buffer of theinFlexUpgrUsage
bytes. This thresho
parameter, the threshold of data in RLC buffer of RB in bytes is defined by the
TrafVolThresholdULHighBitRate parameter instead of this parameter if the allocated
PS This parameter
DCH defines,
bit rate is below theinmaximum
ms, the period ofof
bit rate time
thebetween the timing of event detectio
radio bearer.
PS This parameter defines, in ms, the period of time between the timing of event
The high threshold
detection and the of theof16sending
timing and 8 kbps DCH
a traffic is fixed:
volume measurement report.
PS This
- 512parameter defines
bytes for the time toNRT
RB whose trigger
DCH value to activate
bit rate and deactivate
is 8 kbps. UL loaded
state
-This (UL loaded
512parameter
bytes for thestate
RB for HSPA
whose NRTusers)
DCH and
bit HSPA
rate is load
16 state.
kbps.
is sent to the UE using an RRC: MEASUREMENT CONTROL
Telecom message.
In case of activation
When any other value of than
UL loaded
zero isstate
set toorthe
HSPA load state the this
CellDCHtestTmr, parameter
value isdefines
used
Telecom how
This long
instead oftime UL is total
the RB/DCH
parameter power
specific
the identifier (PrxTotal)
inactivity
for must
the RNPStimers exceed the level that triggersand
InactivityTimerUplinkDCH
object. the UL
loaded state or HSPA load state
InactivityTimerDownlinkDCH. Thechecking in the cell. If that
timer CellDCHtestTmr level is
defines theexceeded
maximum long
time
Telecom In
an expiry
enough,
inactiveof MS
then theit is
test timer CellDCHtestTmr,
checked
allowed towith help in
remain ofthe
E-DCH the MS
CELL_DCH is switched
provided bit ratetomeasurement
state. Cell_FACH state that is
when the restricting
that load parametertoo ToCellFACHinTest
much UL bit rateequals of NRTtoservices
'Yes'. If the ToCellFACHinTest
mapped to E-DCH and that
equals
triggers to 'No',
the UL
In the expiry an Iu
of loaded Release
the timer,state
theor procedure
MSHSPA is initiated
load state.
is switched in the Cell_DCH
to the CELL_FACH state state and the MS
if the
O&M The
is parameter
switched defines
directly to theIdle
the origin of the last configuration action affecting the object
Mode.
parameter ToCellFACHinTest is equal to 'Yes' and the procedures in the CELL_FACH
In case
state of deactivation
continue as normal. of UL loaded state or HSPA
If ToCellFACHinTest loadtostate
is equal 'No',the
an parameter
Iu release defines
how long time
procedure any condition
is initiated and themust MS isnot trigger UL
switched loaded
to the idle state
mode.or HSPA load state. If
UL loaded state or HSPA load state is not triggered long enough, then UL loaded
state
Note! or HSPA
This load state
parameter is canceled.
is only used for testing purposes and it does not affect any
other state transfer recovery function.
1...4, step 1 2 2
0...2550 ms, step 10 ms 500 ms 500 ms

1...30 s, step 1 s 4 sec 4 sec
1...30 s, step 1 s 4 sec 4 sec
0 % (0), 2 % (2), 4 % (4), 6 % (6), 8 6 % (6) 6 % (6)
500...10000 ms, step 500 ms, High throug 1000 ms 1000 ms
0 % (0), 2 % (2), 4 % (4), 6 % (6), 8 6 % (6) 6 % (6)
0...10000 ms, step 200 ms 200 ms 200 ms
500...10000 ms, step 500 ms, Measurement 2000 ms 2000 ms
8 kbps (8), 16 kbps (16), 32 kbps (32), 64 16 kbps (16) 16 kbps (16)
8 kbps (8), 16 kbps (16) 8 kbps (8) 8 kbps (8)
8 kbps (8), 16 kbps (16), 32 kbps (32) 8 kbps (8) 8 kbps (8)
0...10000 ms, step 200 ms 1400 ms 1400 ms
0...10000 ms, step 200 ms 1400 ms 1400 ms
0...10000 ms, step 200 ms 1400 ms 1400 ms
0...10000 ms, step 200 ms 1400 ms 1400 ms
0...10000 ms, step 200 ms 1400 ms 1400 ms
0...30 s, step 1 s 6s 6s
8 kbps (8), 16 kbps (16) 16 kbps (16) 16 kbps (16)
8 kbps (8), 16 kbps (16), 32 kbps (32) 32 kbps (32) 32 kbps (32)
0...20000 ms, step 200 ms 4000 ms 4000 ms
0...20000 ms, step 200 ms 4000 ms 4000 ms
0...20000 ms, step 200 ms 4000 ms 4000 ms
0...20000 ms, step 200 ms 4000 ms 4000 ms
0...20000 ms, step 200 ms 4000 ms 4000 ms
0...120 s, step 1 s 2s 2s
0...6 dB, step 0.1 dB 2 dB 2 dB
0...1, step 0.1 0.2 0.2
0 to 4, step 1 sec 3 sec 3 sec
Not in use (0), In use (1) In use (1) In use (1)
Equal Priority (0), Higher Priority over Iur Equal Priority (0) Equal Priority (0)
100...6300 byte, step 100 byte 1000 byte 1000 byte
10...255 s, step 1 s 60 s 60 s
250 ms (25), 500 ms (50), 1000 ms (100) 8000 ms (800) 8000 ms (800)
0...11, step 1 0 0
0...11, step 1 0 0
0...11, step 1 0 0
0...14, step 1 14 14
0...11, step 1 0 0
0...12, step 1 12 12
0...11, step 1 11 11
0...11, step 1 11 11
0...11, step 1 11 11
0...11, step 1 8 8
0...11, step 1 8 8
0...11, step 1 8 8
0...11, step 1 5 5
0...11, step 1 5 5
0...11, step 1 5 5
0...15, step 1 15 15
0...13, step 1 13 13
0...13, step 1 13 13
0...13, step 1 13 13
0...11, step 1, RT-over-NRT functionality i 11 11
0...20 s, step 0.2 s 1.2 s 1.2 s
0.5...12 s, step 0.1 s 1.5 s 1.5 s
8 bytes (0), 16 bytes (1), 32 bytes (2), 6 1024 bytes 1024 bytes
8 bytes. (0), 16 bytes. (1), 32 bytes. (2) 2048 bytes. 2KB (8) 2048 bytes. 2KB (8)
8 bytes. (0), 16 bytes. (1), 32 bytes. (2) 512 bytes (6) 512 bytes (6)
8 bytes. (0), 16 bytes. (1), 32 bytes. (2) 256 bytes. (5) 256 bytes. (5)
8 bytes (0), 16 bytes (1), 32 bytes (2), 6 1024 bytes 1024 bytes
8 bytes (0), 16 bytes (1), 32 bytes (2), 6 2048 bytes. 2KB (8) 2048 bytes. 2KB (8)
8 bytes (0), 16 bytes (1), 32 bytes (2), 6 512 bytes (6) 512 bytes (6)
8 bytes. (0), 16 bytes. (1), 32 bytes. (2) 256 bytes. (5) 256 bytes. (5)
0 ms (0), 10 ms (10), 20 ms (20), 40 ms 0 ms 0 ms
0 ms (0), 10 ms (10), 20 ms (20), 40 ms 0 ms 0 ms
0...10 s, step 0.5 s 2 secs 2 secs
0...60 minutes, step 1 minutes 0 minutes 0 minutes

No (0), Yes (1) Yes (1) Yes (1)
RNC2600
400 ms
4 sec
4 sec
8% (8)
2000 ms
6 % (6)
200 ms
2000 ms
2000 ms
2000 ms
2000 ms
2000 ms
16 kbps (16)
64 kbps (64)
8 kbps (8)
128 kbps (128)
16 kbps (16)
1400 ms
1400 ms
1400 ms
1400 ms
1400 ms
6s
2000 ms
2000 ms
2000 ms
2000 ms
2000 ms
64 kbps (64)
128 kbps (128)
16 kbps (16)
128 kbps (128)
16 kbps (16)
4000 ms
4000 ms
4000 ms
4000 ms
4000 ms
2s
2 dB
0.2
Disabled (0)
160 ms (8)
3 sec
In use (1)
Equal Priority (0)
1000 byte
60 s
8000 ms (800)
0
0
0
14
0
12
11
11
11
8
8
8
5
5
5
15
13
13
13
11
11
11
1.2 s
1.5 s
1024
2048 bytes. 2KB (8)
512 bytes (6)
3072 bytes. 3KB (9)
1024 bytes. 1KB (7)
1024 bytes. 1KB (7)
256 bytes. (5)
4096 bytes
4096 bytes. 4KB (10)
1024 bytes 1KB (7)
4096 bytes. 4KB (10)
1024 bytes. 1KB (7)
2048 bytes. 2KB (8)
256 bytes. (5)
0 ms
240 ms
2 secs
0 minutes
Not applicable
Yes (1)
Not applicable
Comments
Changed to a value of 500ms following trial. Please refer to report UKRE/12/066
Changed to 8% (8) for rollout of TBO July 2009

Changed to 64 kbps (64) for rollout of TBO July 2009


RAN1201 F-DPCH or RAN1470 HSUPA 2ms TTI
O2 packet scheduling strategy

Changed to 4096 bbytes Nov 2007 in parallel with HSDPA Rollout. O2 packet scheduling strategy to
support
Change UL 384as
made deployment
per issued Change Request Form
O2 packet scheduling strategy


10777
10792
10708
10989
10893
10710
10986
10883
10926
10761
10681
10918
10863
10677
10691
10670
10990
10642
10678
10719
10789
10873
10679
10742
10749
10690
10853
10796
10808
10756
12215
12216
12217
12218
12219
12220
12221
12222
12245
12246
12247
12248
12249
12250
12251
12252

10831
10807
10924
10849
10760
10832
10831
10807
10924
10922
10760
10715

Daily
Daily
Daily
Weekly
Weekly
Daily


New in RU20 on TOP

Daily
Daily
Daily
Daily
Daily
New in RU30
New In RU50 EP1
New in RU30
New in RU30
New In RU50 EP1

New In RU50 EP1
New in RU40
New in RU30
New in RU40
New in RU40
New in RU30
New in RU30
New in RU30
9.0
4.0
5.6
4.0
4.0
4.0
4.0
4.0
9.0
4.5
9.0
9.0
8.0
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
9.0
9.0
5.6
5.6
5.6
5.6
5.6
5.6
5.6
5.6
RNRLC Parameters
Abbreviated Name

AMRLCBufMaxOverbook2NRT
AMRLCBufMaxOverbook3NRT
AMRLCHSFACHPS - AMRLCHSFACHPSMaxDAT
AMRLCHSFACHPS - AMRLCHSFACHPSMaxMRW
AMRLCHSFACHPS - AMRLCHSFACHPSMaxRST
AMRLCHSFACHPS - AMRLCHSFACHPSPeriodMax
AMRLCHSFACHPS - AMRLCHSFACHPSPeriodMin
AMRLCHSFACHPS - AMRLCHSFACHPSPollPDU
AMRLCHSFACHPS - AMRLCHSFACHPSPollSDU
AMRLCHSFACHPS - AMRLCHSFACHPSPollWin
AMRLCHSFACHPS - AMRLCHSFACHPSTriggers
AMRLCHSFACHPS - AMRLCRespHSFACHandRACH
AMRLCHSFACHPS - HSFACHAMRLCRespHSRACH
AMRLCHSRACHPS - AMRLCHSRACHPSMaxDAT
AMRLCHSRACHPS - AMRLCHSRACHPSMaxMRW
AMRLCHSRACHPS - AMRLCHSRACHPSMaxRST
AMRLCHSRACHPS - AMRLCHSRACHPSPeriodMax
AMRLCHSRACHPS - AMRLCHSRACHPSPeriodMin
AMRLCHSRACHPS - AMRLCHSRACHPSPollPDU
AMRLCHSRACHPS - AMRLCHSRACHPSPollSDU
AMRLCHSRACHPS - AMRLCHSRACHPSPollWin
AMRLCHSRACHPS - HSRACHAMRLCRespHSFACH
AMRLCHSRACHPSTriggers
AMRLCMaximumBufferUE - AMRLCMaximumBufferUE100
AMRLCMaximumBufferUE - AMRLCMaximumBufferUE1k
AMRLCOnDCHOfNRTPS - AMRLCOnDCHOfNRTPSCount
AMRLCOnDCHOfNRTPS - AMRLCOnDCHOfNRTPSFilterReTX
AMRLCOnDCHOfNRTPS - AMRLCOnDCHOfNRTPSMaxDAT
AMRLCOnDCHOfNRTPS - AMRLCOnDCHOfNRTPSMaxMRW
AMRLCOnDCHOfNRTPS - AMRLCOnDCHOfNRTPSMaxRST
AMRLCOnDCHOfNRTPS - AMRLCOnDCHOfNRTPSPeriodMax
AMRLCOnDCHOfNRTPS - AMRLCOnDCHOfNRTPSPeriodMin
AMRLCOnDCHOfNRTPS - AMRLCOnDCHOfNRTPSPollPDU
AMRLCOnDCHOfNRTPS - AMRLCOnDCHOfNRTPSPollSDU
AMRLCOnDCHOfNRTPS - AMRLCOnDCHOfNRTPSPollWindow
AMRLCOnDCHOfNRTPS - AMRLCOnDCHOfNRTPSTriggers
AMRLCOnDCHOfSRB136 - AMRLCOnDCHOfSRB136MaxDAT
AMRLCOnDCHOfSRB136 - AMRLCOnDCHOfSRB136PeriodMax
AMRLCOnDCHOfSRB136 - AMRLCOnDCHOfSRB136PeriodMin
AMRLCOnDCHOfSRB136 - AMRLCOnDCHOfSRB136PollPDU
AMRLCOnDCHOfSRB136 - AMRLCOnDCHOfSRB136PollSDU
AMRLCOnDCHOfSRB136 - AMRLCOnDCHOfSRB136PollWindow
AMRLCOnDCHOfSRB136 - AMRLCOnDCHOfSRB136Triggers
AMRLCOnDCHOfSRB34 - AMRLCOnDCHOfSRB34MaxDAT
AMRLCOnDCHOfSRB34 - AMRLCOnDCHOfSRB34PeriodMax
AMRLCOnDCHOfSRB34 - AMRLCOnDCHOfSRB34PeriodMin
AMRLCOnDCHOfSRB34 - AMRLCOnDCHOfSRB34PollPDU
AMRLCOnDCHOfSRB34 - AMRLCOnDCHOfSRB34PollSDU
AMRLCOnDCHOfSRB34 - AMRLCOnDCHOfSRB34PollWindow
AMRLCOnDCHOfSRB34 - AMRLCOnDCHOfSRB34Triggers
AMRLCOnDCHOfStream - AMRLCOnDCHOfStreamCount
AMRLCOnDCHOfStream - AMRLCOnDCHOfStreamDiscardTime
AMRLCOnDCHOfStream - AMRLCOnDCHOfStreamFilterReTX
AMRLCOnDCHOfStream - AMRLCOnDCHOfStreamMaxDAT
AMRLCOnDCHOfStream - AMRLCOnDCHOfStreamMaxMRW
AMRLCOnDCHOfStream - AMRLCOnDCHOfStreamMaxRST
AMRLCOnDCHOfStream - AMRLCOnDCHOfStreamPeriodMax
AMRLCOnDCHOfStream - AMRLCOnDCHOfStreamPeriodMin
AMRLCOnDCHOfStream - AMRLCOnDCHOfStreamPollPDU
AMRLCOnDCHOfStream - AMRLCOnDCHOfStreamPollSDU
AMRLCOnDCHOfStream - AMRLCOnDCHOfStreamPollWindow
AMRLCOnDCHOfStream - AMRLCOnDCHOfStreamTriggers
AMRLCOnDCHSRB136OffSat
AMRLCOnEDCHOfNRTPS - AMRLCOnEDCHOfNRTPSCount
AMRLCOnEDCHOfNRTPS - AMRLCOnEDCHOfNRTPSMaxDAT
AMRLCOnEDCHOfNRTPS - AMRLCOnEDCHOfNRTPSMaxMRW
AMRLCOnEDCHOfNRTPS - AMRLCOnEDCHOfNRTPSMaxRST
AMRLCOnEDCHOfNRTPS - AMRLCOnEDCHOfNRTPSPeriodMax
AMRLCOnEDCHOfNRTPS - AMRLCOnEDCHOfNRTPSPeriodMin
AMRLCOnEDCHOfNRTPS - AMRLCOnEDCHOfNRTPSPollPDU
AMRLCOnEDCHOfNRTPS - AMRLCOnEDCHOfNRTPSPollSDU
AMRLCOnEDCHOfNRTPS - AMRLCOnEDCHOfNRTPSPollWindow
AMRLCOnEDCHOfNRTPS - AMRLCOnEDCHOfNRTPSTriggers
AMRLCOnEDCHOfStrPS - EDCHStrPSCount
AMRLCOnEDCHOfStrPS - EDCHStrPSDiscardTime
AMRLCOnEDCHOfStrPS - EDCHStrPSMaxDAT
AMRLCOnEDCHOfStrPS - EDCHStrPSMaxMRW
AMRLCOnEDCHOfStrPS - EDCHStrPSMaxRST
AMRLCOnEDCHOfStrPS - EDCHStrPSPeriodMax
AMRLCOnEDCHOfStrPS - EDCHStrPSPeriodMin
AMRLCOnEDCHOfStrPS - EDCHStrPSPollPDU
AMRLCOnEDCHOfStrPS - EDCHStrPSPollSDU
AMRLCOnEDCHOfStrPS - EDCHStrPSPollWindow
AMRLCOnEDCHOfStrPS - EDCHStrPSTriggers
AMRLCOnFACHOfPS - AMRLCOnFACHOfPSMaxDAT
AMRLCOnFACHOfPS - AMRLCOnFACHOfPSMaxMRW
AMRLCOnFACHOfPS - AMRLCOnFACHOfPSMaxRST
AMRLCOnFACHOfPS - AMRLCOnFACHOfPSPeriodMax
AMRLCOnFACHOfPS - AMRLCOnFACHOfPSPeriodMin
AMRLCOnFACHOfPS - AMRLCOnFACHOfPSPollPDU
AMRLCOnFACHOfPS - AMRLCOnFACHOfPSPollSDU
AMRLCOnFACHOfPS - AMRLCOnFACHOfPSPollWindow
AMRLCOnFACHOfPS - AMRLCOnFACHOfPSTriggers
AMRLCOnFACHOfSRB - AMRLCOnFACHOfSRBMaxDAT
AMRLCOnFACHOfSRB - AMRLCOnFACHOfSRBPeriodMax
AMRLCOnFACHOfSRB - AMRLCOnFACHOfSRBPeriodMin
AMRLCOnFACHOfSRB - AMRLCOnFACHOfSRBPollPDU
AMRLCOnFACHOfSRB - AMRLCOnFACHOfSRBPollSDU
AMRLCOnFACHOfSRB - AMRLCOnFACHOfSRBPollWindow
AMRLCOnFACHOfSRB - AMRLCOnFACHOfSRBTriggers
AMRLCOnHSDSCHOfNRTPS - AMRLCOnHSDSCHOfNRTPSCount
AMRLCOnHSDSCHOfNRTPS - AMRLCOnHSDSCHOfNRTPSFilterReTX
AMRLCOnHSDSCHOfNRTPS - AMRLCOnHSDSCHOfNRTPSMaxDAT
AMRLCOnHSDSCHOfNRTPS - AMRLCOnHSDSCHOfNRTPSMaxMRW
AMRLCOnHSDSCHOfNRTPS - AMRLCOnHSDSCHOfNRTPSMaxRST
AMRLCOnHSDSCHOfNRTPS - AMRLCOnHSDSCHOfNRTPSPeriodMax
AMRLCOnHSDSCHOfNRTPS - AMRLCOnHSDSCHOfNRTPSPeriodMin
AMRLCOnHSDSCHOfNRTPS - AMRLCOnHSDSCHOfNRTPSPollPDU
AMRLCOnHSDSCHOfNRTPS - AMRLCOnHSDSCHOfNRTPSPollSDU
AMRLCOnHSDSCHOfNRTPS - AMRLCOnHSDSCHOfNRTPSPollWindow
AMRLCOnHSDSCHOfNRTPS - AMRLCOnHSDSCHOfNRTPSTriggers
AMRLCOnHSDSCHOfStrPS - HSDSCHStrDiscardTime
AMRLCOnHSDSCHOfStrPS - HSDSCHStrPSCount
AMRLCOnHSDSCHOfStrPS - HSDSCHStrPSFilterReTX
AMRLCOnHSDSCHOfStrPS - HSDSCHStrPSMaxDAT
AMRLCOnHSDSCHOfStrPS - HSDSCHStrPSMaxMRW
AMRLCOnHSDSCHOfStrPS - HSDSCHStrPSMaxRST
AMRLCOnHSDSCHOfStrPS - HSDSCHStrPSPeriodMax
AMRLCOnHSDSCHOfStrPS - HSDSCHStrPSPeriodMin
AMRLCOnHSDSCHOfStrPS - HSDSCHStrPSPollPDU
AMRLCOnHSDSCHOfStrPS - HSDSCHStrPSPollSDU
AMRLCOnHSDSCHOfStrPS - HSDSCHStrPSPollWindow
AMRLCOnHSDSCHOfStrPS - HSDSCHStrPSTriggers
AMRLCPeriodMaxHSSRB
AMRLCRelatTXWindow - AMRLCRelatTXWindowRate1
AMRLCRelatTXWindow - AMRLCRelatTXWindowRate1Size
AMRLCRespTimeDCH - AMRLCRespTimeDCH10
AMRLCRespTimeDCH - AMRLCRespTimeDCHRevHSDSCH
AMRLCRespTimeDCH - AMRLCRespTimeRevEDCH
AMRLCRespTimeEDCH
AMRLCRespTimeFACHAndRACH
AMRLCRespTimeHSDSCH - AMRLCRespTimeHSDSCHRevDCH
AMRLCRespTimeHSDSCH - AMRLCRespTimeHSDSCHRevEDCH
AMRLCRespTimeHSSRB
AMRLCRTTPollPDUSatellite
AMRLCSRB3n4PeriodMax
AMRLCSRB3n4RespTime
AMRLCSRBHSPA - AMRLCRespTimeSRBHSPA
AMRLCSRBHSPA - AMRLCSRBHSPAMaxDAT
AMRLCSRBHSPA - AMRLCSRBHSPAPeriodMax
AMRLCSRBHSPA - AMRLCSRBHSPAPeriodMin
AMRLCSRBHSPA - AMRLCSRBHSPAPollPDU
AMRLCSRBHSPA - AMRLCSRBHSPAPollSDU
AMRLCSRBHSPA - AMRLCSRBHSPAPollWindow
AMRLCSRBHSPA - AMRLCSRBHSPATriggers
AMRLCTXWindowSizeSRB - AMRLCTXWindowSizeSRB2
PDUSizeBitRateThr
PDUSizeCodeThreshold
PDUSizeSIRThr
SDUdiscardModeRTPS
UMRLCEVoiceDiscardTime
Telecom Parameters
RLCConfOptionFPS
RNRLCId
O&M Parameters
RNRLCChangeOrigin
Full Name
Managed Object
AM RLC buffer max total overbooking for 2 PS RABs RNRLC

AM RLC buffer max overbooking for more than 2 PS RABs RNRLC
AM RLC MaxDAT transmissions for PS NRT with HS-FACH RNRLC
AM RLC MaxMRW transmissions for PS NRT with HS-FACH RNRLC
AM RLC MaxRST transmissions for PS NRT with HS-FACH RNRLC
AM RLC status period max for PS NRT with HS-FACH RNRLC
AM RLC status period min for PS NRT with HS-FACH RNRLC
AM RLC period Poll_PDU for PS NRT with HS-FACH RNRLC
AM RLC period Poll_SDU for PS NRT with HS-FACH RNRLC
AM RLC period Poll_Window for PS NRT with HS-FACH RNRLC
AM RLC status report triggers for PS NRT with HS-FACH RNRLC
AM RLC round trip time with HS-DSCH/RACH RNRLC
AM RLC round trip time with HS-DSCH/HS-RACH RNRLC
AM RLC MaxDAT transmissions for PS NRT with HS-RACH RNRLC
AM RLC MaxMRW transmissions for PS NRT with HS-RACH RNRLC
AM RLC MaxRST transmissions for PS NRT with HS-RACH RNRLC
AM RLC status period max for PS NRT with HS-RACH RNRLC
AM RLC status period min for PS NRT with HS-RACH RNRLC
AM RLC period Poll_PDU for PS NRT with HS-RACH RNRLC
AM RLC period Poll_SDU for PS NRT with HS-RACH RNRLC
AM RLC period Poll_Window for PS NRT with HS-RACH RNRLC
AM RLC round trip time with HS-RACH/HS-FACH RNRLC
AM RLC status report triggers for PS NRT with HS-RACH RNRLC
AM RLC maximum buffer allocation for UE capability 100 RNRLC
AM RLC status reports count for PS NRT with DCH RNRLC
AM RLC retransmission filter for PS NRT with DCH RNRLC
AM RLC MaxDAT transmissions for PS NRT with DCH RNRLC
AM RLC MaxMRW transmissions for PS NRT with DCH RNRLC
AM RLC MaxRST transmissions for PS NRT with DCH RNRLC
AM RLC status period max for PS NRT with DCH RNRLC
AM RLC status period min for PS NRT with DCH RNRLC
AM RLC period Poll_PDU for PS NRT with DCH RNRLC
AM RLC period Poll_SDU for PS NRT with DCH RNRLC
AM RLC period Poll_Window for PS NRT with DCH RNRLC
AM RLC status report triggers for PS NRT with RNRLC
AM RLC MaxDAT transmissions for SRB13.6 with DCH RNRLC
AM RLC status period max for SRB13.6 with DCH RNRLC
AM RLC status period min for SRB13.6 with DCH RNRLC
AM RLC period Poll_PDU for SRB13.6 with DCH RNRLC
AM RLC period Poll_SDU for SRB13.6 with DCH RNRLC
AM RLC period Poll_Window for SRB13.6 with DCH RNRLC
AM RLC status report triggers for SRB13.6 with DCH RNRLC
AM RLC MaxDAT transmissions for SRB3.4 with DCH RNRLC
AM RLC status period max for SRB3.4 with DCH RNRLC
AM RLC status period min for SRB3.4 with DCH RNRLC
AM RLC period Poll_PDU for SRB3.4 with DCH RNRLC
AM RLC period Poll_SDU for SRB3.4 with DCH RNRLC
AM RLC period Poll_Window for SRB3.4 with DCH RNRLC
AM RLC status report triggers for SRB3.4 with DCH RNRLC
AM RLC status reports count for PS streaming with DCH RNRLC
AM RLC SDU discard time for PS streaming with DCH RNRLC
AM RLC retransmission filter for PS streaming with DCH RNRLC
AM RLC MaxDAT transmissions for PS streaming with DCH RNRLC
AM RLC MaxMRW transmissions for PS streaming with DCH RNRLC
AM RLC MaxRST transmissions for PS streaming with DCH RNRLC
AM RLC status period max for PS streaming with DCH RNRLC
AM RLC status period min for PS streaming with DCH RNRLC
AM RLC period Poll_PDU for PS streaming with DCH RNRLC
AM RLC period Poll_SDU for PS streaming with DCH RNRLC
AM RLC period Poll_Window for PS streaming with DCH RNRLC
AM RLC status report triggers for PS streaming with DCH RNRLC
AM RLC timer offset for SRB13.6 with satellite DCH RNRLC
AM RLC status reports count for PS NRT with E-DCH RNRLC
AM RLC MaxDAT transmissions for PS NRT with EDCH RNRLC
AM RLC MaxMRW transmissions for PS NRT with EDCH RNRLC
AM RLC maxRST transmissions for PS NRT with EDCH RNRLC
AM RLC status period max for PS NRT with E-DCH RNRLC
AM RLC status period min for PS NRT with E-DCH RNRLC
AM RLC period Poll_PDU for PS NRT with E-DCH RNRLC
AM RLC period Poll_SDU for PS NRT with E-DCH RNRLC
AM RLC period Poll_Window for PS NRT with E-DCH RNRLC
AM RLC status report triggers for PS NRT with E-DCH RNRLC
AM RLC status reports count for PS streaming E-DCH RNRLC
AM RLC SDU discard time for PS streaming E-DCH RNRLC
AM RLC MaxDAT transmissions for PS streaming EDCH RNRLC
AM RLC MaxMRW transmissions for PS streaming EDCH RNRLC
AM RLC maxRST transmissions for PS streaming EDCH RNRLC
AM RLC status period max for PS streaming E-DCH RNRLC
AM RLC status period min for PS streaming E-DCH RNRLC
AM RLC period Poll_PDU for PS streaming E-DCH RNRLC
AM RLC period Poll_SDU for PS streaming E-DCH RNRLC
AM RLC period Poll_Window for PS streaming E-DCH RNRLC
AM RLC status report triggers for PS streaming E-DCH RNRLC
AM RLC MaxDAT transmissions for PS NRT with FACH/RACH RNRLC
AM RLC MaxMRW transmissions for PS NRT with FACH/RACH RNRLC
AM RLC MaxRST transmissions for PS NRT with FACH/RACH RNRLC
AM RLC status period max for PS NRT with FACH/RACH RNRLC
AM RLC status period min for PS NRT with FACH/RACH RNRLC
AM RLC period Poll_PDU for PS NRT with FACH/RACH RNRLC
AM RLC period Poll_SDU for PS NRT with FACH/RACH RNRLC
AM RLC period Poll_Window for PS NRT with FACH/RACH RNRLC
AM RLC status report triggers for PS NRT with FACH/RACH RNRLC
AM RLC MaxDAT transmissions for SRB with FACH/RACH RNRLC
AM RLC status period max for SRB with FACH/RACH RNRLC
AM RLC status period min for SRB with FACH/RACH RNRLC
AM RLC period Poll_PDU for SRB with FACH/RACH RNRLC
AM RLC period Poll_SDU for SRB with FACH/RACH RNRLC
AM RLC period Poll_Window for SRB with FACH/RACH RNRLC
AM RLC status report triggers for SRB with FACH/RACH RNRLC
AM RLC status reports count for PS NRT with HSDSCH RNRLC
AM RLC retransmission filter for PS NRT with HSDSCH RNRLC
AM RLC MaxDAT transmissions for PS NRT with HSDSCH RNRLC
AM RLC MaxMRW transmissions for PS NRT with HSDSCH RNRLC
AM RLC maxRST transmissions for PS NRT with HSDSCH RNRLC
AM RLC status period max for PS NRT with HS-DSCH RNRLC
AM RLC status period min for PS NRT with HS-DSCH RNRLC
AM RLC period Poll_PDU for PS NRT with HS-DSCH RNRLC
AM RLC period Poll_SDU for PS NRT with HS-DSCH RNRLC
AM RLC period Poll_Window for PS NRT with HSDSCH RNRLC
AM RLC status report triggers for PS NRT with HSDSCH RNRLC
AM RLC SDU discard time for PS streaming with HSDSCH RNRLC
AM RLC status reports count for PS stream with HS-DSCH RNRLC
AM RLC retransmission filter for PS stream with HS-DSCH RNRLC
AM RLC MaxDAT transmissions for PS stream with HS-DSCH RNRLC
AM RLC MaxMRW transmissions for PS stream with HSDSCH RNRLC
AM RLC maxRST transmissions for PS stream with HS-DSCH RNRLC
AM RLC status period max for PS streaming with HSDSCH RNRLC
AM RLC status period min for PS streaming with HSDSCH RNRLC
AM RLC period Poll_PDU for PS streaming with HSDSCH RNRLC
AM RLC period Poll_SDU for PS streaming with HSDSCH RNRLC
AM RLC period Poll_Window for PS streaming with HSDSCH RNRLC
AM RLC status report triggers for PS str with HS-DSCH RNRLC
AM RLC status period max for SRBs with HS-RACH/HS-FACH RNRLC
AM RLC relative Tx window size defining data rate 1 RNRLC
AM RLC relative Tx window size assigned to data rate 1 RNRLC
AM RLC round trip time with DCH/DCH of TTI 10 ms RNRLC
AM RLC round trip time for DCH/HS-DSCH RNRLC
AM RLC round trip time for E-DCH/DCH RNRLC
AM RLC round trip time with E-DCH RNRLC
AM RLC round trip time with FACH/RACH RNRLC
AM RLC round trip time with HS-DSCH/DCH RNRLC
AM RLC round trip time with HS-DSCH/E-DCH RNRLC
AM RLC round trip time for SRBs with HS-RACH/HS-FACH RNRLC
AM RLC period Poll_PDU with satellite Iub RNRLC
AM RLC status period max for SRB3 and SRB4 RNRLC
AM RLC round trip time for SRB3 and SRB4 RNRLC
AM RLC round trip time for SRB on HSPA RNRLC
AM RLC MaxDAT transmissions for SRB on HSPA RNRLC
AM RLC status period max for SRB on HSPA RNRLC
AM RLC status period min for SRB on HSPA RNRLC
AM RLC period Poll_PDU for SRB on HSPA RNRLC
AM RLC period Poll_SDU for SRB on HSPA RNRLC
AM RLC period Poll_Window for SRB on HSPA RNRLC
AM RLC status report triggers for SRB on HSPA RNRLC
AM RLC transmission window size for SRB 2 RNRLC
Bit rate threshold for RLC PDU size 656 with HS-DSCH RNRLC
Number of HS-PDSCH codes for greater RLC PDU size RNRLC
SIR threshold for RLC PDU size 656 with HS-DSCH RNRLC
SDU discard mode for RT PS RAB employing RLC AM RNRLC
UM RLC SDU discard time in UE for CS voice over HSPA RNRLC
RLC Conf option switch for Fast Cell_PCH Switching RNRLC

RNRLC Identifier RNRLC
Change origin RNRLC

Group Description
AC This parameter defines the maximum overbooking of the AM RLC buffer for all RAB combi
AC This parameter defines the maximum overbooking of the AM RLC buffer for all RAB combi
AC This parameter defines the value of the RLC protocol parameter MaxDAT for the AM R
AC This parameter defines the value of the RLC protocol parameter MaxMRW for the AM RL
AC This parameter defines the value of the RLC protocol parameter MaxRST for the AM RL
AC This parameter defines the maximum status reporting period of the AM RLC in the rela
AC This parameter defines the minimum status reporting period of the AM RLC for the PS
AC This parameter defines the value of the RLC protocol parameter Poll_PDU for the AM RL
AC This parameter defines the value of the RLC protocol parameter Poll_SDU for the AM R
AC This parameter defines the value of the RLC protocol parameter Poll_window for the AM
AC This parameter shows the polling and status reporting triggers and the RLC timers for
AC the
ThisAM RLC entity
parameter of thethe
defines PSAM interactive
RLC Round or background
Trip Times RAB (RTT)infor thetheHS-DSCH/RACH
UL data transfer wi
transport channel configuration when the HS-FACH is used in DL on CELL_FACH
AC This
state.parameter
The followingdefines the AM
triggers andRLC timers Round
and Trip period Times (RTT)methods
definition for the DL are data
shown transfer
with wi
AC the
Thisparameter:
parameter defines the value of the RLC protocol parameter MaxDAT for the AM RL
"Timer poll periodic" to set the timer for the timer-based polling,
AC This
"Timerparameter definesto
status periodic" the setvalue of thefor
the timer RLC theprotocol
timer-based parameter
status MaxMRW
reporting, for the AM RL
AC "Timer poll" to set
This parameter the timer
defines for a sent
the value of thepoll,
RLC protocol parameter MaxRST for the AM RL
"Timer poll prohibit" to set the timer for filtering out the polls in the sender,
AC This parameter defines the maximum status reporting period of the AM RLC in relatio
"Timer status prohibit" to set the timer for filtering out the status reports in the
AC This parameter defines the minimum status reporting period of the AM RLC for the PS
receiver,
AC "Poll PDU" to setdefines
This parameter the trigger polling every
the minimum valuePoll_PDU
of the RLC PDU,protocol parameter Poll_PDU for t
"Poll SDU" to set the trigger polling every Poll_SDU SDU,
AC This
"Poll parameter
This window" todefines
parameter set the the
defines the value
maximum
window-based of theAM RLC RLC
polling protocol
buffer of
trigger, parameter Poll_SDU
the UE, which for the AM RL
has reported
AC the
Thisvalue
"Last
This of 1150
transmission
parameter
parameter kBytes
PDUthe
defines
defines theforvalue
poll" its
to nominal
maximum setof the
the
AM Total
polling
RLC RLC RLC
protocolAMof
trigger
buffer and
for MAC-hs/MAC-ehs
the
parameter
the lastwhich
UE, AMD PDU
Poll_window
has reported buffer
for the AM
size.
the This of
scheduled
value parameter
for the first
1250 kBytesallows to
transmission,
for itsdefine
nominal theTotal
maximum RLC AMbuffer
and smaller than the reported
MAC-hs/MAC-ehs buffer
AC This
value
"Last parameter
of UE RLCdefines
retransmission buffer.PDU the AM to
In poll"
certain RLC Round
cases
set the the Trip Time
reported
polling trigger (RTT)
value forUE
of
forsmaller
the theRLC
last UL data
AMD buffer
PDU transfer
is whe
size. This parameter allows to define the maximum buffer than the reported
AC unneccessarily
scheduled
This of UEfor
valueenables RLC big
tothe and aIn
activate
buffer. smaller
retransmission,
and buffer
deactivate
certain casesthe isthe
enough
polling
reported to
andstore
status
value data received
of reporting
UE during
triggers
RLC buffer one the RLC timers for
is and
L2 TTI.
"Missing
"Timer Therefore,
PDU
poll
unneccessarilyperiodic" it
indicator"is
to reasonable
to
set set
the the
timer to define
receiver
for the tosmaller
detect
timer-based maximum
the missing
polling, buffer
AMD size
PDUs, in these
AC This parameter big and a
defines thesmaller
maximum buffer AM is RLC
enough to store
buffer of thedataUE, received
which has during
reportedone the
case.
"SDU
L2 TTI.discard
"Timer status after itMaxDAT
periodic"
Therefore, to settransmissions"
is reasonable the timer for the
to define to definemaximum
timer-based
smaller statically whether
status theinSDU
reporting,
buffer size these
AC discard aftertoMaxDAT
"Timer poll" retransmissions
set the timer for a sent poll, or No_discard after MaxDAT transmissions are
case.
AC to be used,
"Timer and
poll prohibit" to set the timer for filtering out polls in the sender,
"In sequence
"Timer status"delivery
prohibit of to SDUs
set theintimer UE" to fordefine
filtering whether
out status the reports
RLC entity of receiver,
in the the UE is to
AC This parameter
deliver
"Poll to setdefines
the received
PDU" theSDUs thetomaximum
trigger upper every
polling AM Poll_PDU
layers RLC bufferPDU,
in sequence ofregardless
the UE, which has
of the reported
value of thethe
AC RAB parameter
"Poll
This attribute
SDU" Delivery
to setdefines Order.
the trigger polling every
the maximum AM Poll_SDU
RLC bufferSDU, of the UE, which has reported
"Pollvalue
the window" to set the window-based polling trigger,
AC This parameter defines the maximum AM RLC buffer ofand
of 1500 kBytes for its nominal Total RLC AM theMAC-hs/MAC-ehs
UE, which has reported buffer
"Last
size. transmission
This parameter PDU allowspoll"totodefine
set the the polling
maximum trigger for the
buffer last AMD
smaller than PDU
the scheduled for the first tran
reported
AC the
Thisvalue of 1800
parameter kBytesthe formaximum
its nominal AMTotal RLC AMofand MAC-hs/MAC-ehs buffer the va
"Last
value of UE
size. This RLCdefines
retransmission
parameter buffer.PDU
allowsIn poll"
certain to set
to define casesthe
the the
RLC
polling
maximum
buffer
trigger
reported thethe
for
value
buffer
UE,
of UE
smaller
which
last AMD
RLC
than
hasPDU
buffer
the
reported
scheduled
is
reported
for the retrans
AC "Missing PDU
unneccessarily
This parameter indicator"
big and ato set
smaller the receiver
buffer is to
enough detect to the
store missing
data AMD
received PDUs,during one
value of UE RLCdefines
buffer.the maximum
In certain casesAMthe RLC buffer of
reported the UE
value of UEwhich
RLChas bufferreported
is the
"SDU
L2 TTI.discard after itMaxDAT
Therefore, is reasonable transmissions"
to define to definemaximum
smaller statically buffer
whether theinSDU
size these discard after MaxDAT
AC unneccessarily
This parameter big and
definesofthe a smaller
maximum buffer is enough to store data received during one
"In sequency
case. delivery SDUs in UE" AM RLC buffer
to define whether of the
the UE,
RLCwhich
entityhas
of the reported
UE is to deliver the recei
L2
the TTI.
value Therefore,
of 2300 it is reasonable
kBytes for its to define
nominal Total smaller
RLC AMmaximum
and buffer size in these
MAC-hs/MAC-ehs buffer
AC This
case. parameter defines the maximum AM RLC buffer of the UE, which has reported
size.
the This parameter allows to define the maximum buffer smaller than the reported
AC Thisvalue
value
of 2550
parameter
of UE
kBytesthe
RLCdefines
buffer.
formaximum
its nominal
In certain casesAMRLCTotal RLC
the buffer
reported
AM and
the MAC-hs/MAC-ehs
ofvalue UE,
of UEwhich
RLChas buffer
buffer
reported
is
size.
the This
value parameter
of 300big kBytes allowsfor to
its define
nominal the maximum
Total RLC AM buffer
and smaller than
MAC-hs/MAC-ehs the reported
buffer
AC unneccessarily
This
value parameter
of UE RLCdefinesand a
buffer. Insmaller
the maximum
certain buffer
casesAM isthe
enough
RLC to store
buffer
reported of the
value data
UE
of UEreceived
which
RLChas during
buffer is one
reported
size.
L2
the This
TTI.
value parameter
Therefore,
of 400big it
Kbytes allows
is to
reasonable define
for maximum
its nominal to the
define maximum
Total smaller
RLC AM buffer
maximum
and smaller
MAChs/ than
buffer the
size
MAC-ehs in reported
these
buffer
AC unneccessarily
This
value parameter
of UE RLCdefinesand a
buffer issmaller
the buffer
unneccessarily AM is big
enough
RLC and atobuffer
buffer store
of
smallerthe data
UE, received
bufferwhich has
is enough during
reportedone the
to store
case.
size.
L2 This
TTI. parameter
Therefore, it allows
is to define
reasonable to the maximum
define smaller maximum smaller than
buffer theinreported
size these
AC data
This
value received
parameter
of UE RLC during
defines one theTTI. Therefore,
maximum AMitRLC is reasonable
buffer of the to define
UE, which smaller
has maximum
reported the va
case.
buffer size in these cases.
AC This parameter defines the maximum AM RLC buffer of the UE, which has reported
AC the
Thisvalue parameter of 750defines kBytes the for its minimum nominalnumber Total RLC for the AMAM andRLC MAC-hs/MAC-ehs
status reports that buffer are
size.
received This parameter
for the PS allows
interactive to define
and the
background maximum radio bufferbearers smaller in the than durationthe reported
of the
AC This
value parameter
of UE RLCdefines buffer. the
In when AMD PDU
certain cases retransmission
the reported filtering
value of period
UE RLC in relation
buffer is to the
RLC
RLC transmission
round trip time window
for the PS data
interactive is transferred
and background with DCH. radio The parameter
bearers when isdatausedis
AC unneccessarily
This
when parameter
the expected big
defines and
RLC a
the smaller
status value buffer
of the RLC
reporting is enough
period protocolis to
producedstore
parameter data with received
MaxDAT
the algorithm during
for the one
using AM
transferred
L2
RLC TTI.entity Therefore,
ofwith the DCH.
PS RLC
it isinteractive
reasonable timerand isto used define
background in filtering
smaller radio out
maximum extra retransmissions
bearers buffer
when size
data inisthese of the
AC the
This
AMD transmission
parameter
PDUs.with Thedefines window
timerValue isthe size,
started AM
valueinofthe RLC thesender RTT,
RLC protocol maximum
for a particular status
parameter reporting
received MaxMRW period
status forreportand
the AM
cases.
transferred
value of thisofparameter DCH. asAMD of the
inputs. Ifparameter
the expected defines status the maximum
reporting periodnumber isreports of
smaller
AC RLC
which
The entity
indicates
parameter the a PS
missing
defines interactive
thereporting
value which and
PDU.of periodbackground
the isWhile RLC the radio
timer
protocol is bearers
running, whenall data
status is
transmissions
than the maximum
transferred with for DCH.the statusAMDThe PDU,
value ofACK the set
parameter defined equaldefines toparameter
with the
theMaxDAT-1.
"AM
the
MaxRST
RLC
maximum The
status for
value
number
theof
period AM
of
received
RLC
the entity
parameter byof thetheis sender,
PS
configured except
interactive as for
and
such background
to SUFIs,
the RLC are radio
entity discarded;bearers
of the RNC NACKs
when and in
data
it isthe is status
signalled
AC max
This for do
transmissions
reports PSnot
parameter NRT for with
defines
trigger the move the the DCH"
retransmission maximum
MRW parameter,
command, ofstatus any the pollAMD
ofreporting
which
the trigger
is set period
PDUs Poll_PDU
equal ofindicated
thethe
to AM isMaxMRW-1.
used
RLC
missing. for
in the
transferred
to
RLC the
relation RLC
entity to of
the with
entitythe
RLC DCH.
of
RNC the
round The
orUE the value
trip rounded
UE.
time ofThe
fortheup parameter
toas
value
the the
PS of closest
the
interactive defines
Poll_PDU value and the ismaximum
orbackground
down
set tothe
equal the number
to
radiomaximum
the of
AC The
When
This valuean ACK in
parameter
transmissions of thefor parameter
isdefines
received
the RLC for is
thesignalling.
minimum
RESET configured
the last PDU, missing
status which such
AMD
reporting
is to
set PDUthe period
equal RLC
which to entity
ofthe was
the of
AMincluded
MaxRST-1. RLC for RNC inThe and
the it
value
expected
bearers allowed
whenstatus data the
period RRC
isthe assuming
transferred the
with maximum
DCH. The transport
maximum channel
value user
isvalue
used data
oras rate.
the The
is
PS signalled
timer's
value status
interactive
of the to the
report,
and
parameter RLC
background entity
is timer
configured ofisradio
the UE
stopped. bearers
as rounded
such After when
to theup
the to
data
RLC theis
expiration closest
entity ofofthe
transferred the timer,
RNCwith adownnewitvalue
DCH.
and toThe
is
AC This
value
for the parameter
which is defines
signalled the
to minimum
the UE must value be of
rounded the RLC down protocolto the parameter
nearest value Poll_PDU that is
the
signalled
for the ofAM
maximum
retransmission
value AM the RLC
tothe
RLC the valuetimers
isRLC
parameter entity
allowed
triggered Timer_Poll,
entity
of isthe set of into
based
PS thethe
the UEonTimer_poll_periodic,
RRC
AM
interactive
the
roundedRLCsignalling.
last timers
and
status
up to The
background
report Timer_status_periodic,
parameter
Timer_Poll_Prohibit
theactivations
closest received
radio value iswhile
bearers
significant
orthe and
downthe timer
when
only
toRLC the if
data
AC allowed
Timer_MRW,
the
This SDUparameterindiscard RRC
and after
defines signalling;
Timer_RST MaxDAT if
in the
accordancevalue
retransmissions exceeds with their
is the the
applied. maximum, which
with the "AM RRC
was running.
Timer_Status_Prohibit
maximum
is transferred value If no
with
status
allowed
DCH. intheinreport
The
value
accordance
the is of
RRC
parameter
the
received toRLC
signalling. their protocol
during activations parameter
timer, with a thenew Poll_SDU
"AM RLC for
retransmission status the is AM
signalling
status
RLC
triggered report
entity allows,
of
based triggers
the on the
PS the trigger
for PS
interactive
next Poll_SDU
NRT
status andwith isdefines
DCH"
background
report configured
received
how
parameter. radioafter
often
instead The
bearers
the
the to
timersender
the
when
expiration RLC
values data
of
polls
entity
are
the is theof the
timer. A
AC report
This
receiver triggers
parameter in accordancefor PS
defines NRT theRLC
with with
value
the DCH" of the
activation parameter.
RLC ofRNC. protocol
the The
poll value
parameter
trigger is configured
'polling Poll_window
every as
Poll_PDUsuch fortothe to
UE. The
configured
transferred
retransmission value as
with is
such signalled
DCH.
filter totimerthe
The is to
value
usedthe RLC
entity
ofonly the ofisentity
in the
parameter
the of
RLC the TheUE
indicates
entity rounded
timer
of thevalues
in thedown
RNC, are
numberif to
it the
signalled
has of nearest
the
been RLC
the
AM
PDU'. RLC
RLC The entity
entity
value of
of the
ofthe the RNC.
PS The
interactive
parameter valueis and expressed signalled
background in to the
relationradioor RLC tobearers
theentity size of
when ofthe the UE
data is and
allocated
AC value
the
This
SDUs RLC
activated that
parameter
how is
entity
with allowed
often of
the the
activates
the"AM in
UE
sender the
RLC rounded
and RRCpolls signalling.
deactivates
status up
thereport to the
receiver the The
closest
triggers expected
polling
inmaximum value
accordance
for and
PS value
status
NRT down
with
with is used
to
reporting
theDCH" the for
maximum
activation Poll_PDU
triggers
parameter. of the
rounded
transferred
transmission up towindow
with the DCH. closest forThe the value
value
AMR orof down
RLC the to
parameter
entity. the It is indicates
transformed valuehow allowed
into often the the in the RRC
sender
corresponding
and
value
the
poll Poll_SDU
RLC allowed
trigger timers
'polling regardless
infor theevery
the RRC AM ofRLC
Poll_SDU their
signalling. activation
entity SDU'. of RLC the The statuses.
PS interactive
value is The algorithm
configured or background as is not
such applied
RAB
to the thatRLCif it
AC signalling.
This
polls
number parameter
the receiver
for the defines
AMD in accordance
PDUs the value
by of
with
rounding thethe activation
it up protocol
to the of parameter
the
closest poll trigger
integer MaxDAT
and 'window for
configuring the
based AMit
has
uses
entity not
DCH been
of The thein activated
its data with
transfer the "AM
isdirection. RLC The statusfollowing report triggers
triggers and for PS
timers NRT and withperiod
AC RLC
polling'.
to
DCH"
This the entity
AM
parameter;
parameter ofRNC.
RLC the
value SRB
entity.
The
is
triggers
defines
valuewhen
13.6
configured
Poll_PDU
thePoll_PDUmaximum
signalled
as
can the suchbe
andsignalling
set
status
to the
to
Poll_SDU
the RLC
aRLC
toreportingis
bigger are
entity
transferred
entity value
of the
of
configured
period
the
over
with
of the
UE
RNC. DCH.
other
to AM
rounded
The The
means.
conform
RLC value up to
invalue
toThe is of
the
definition
the
the closest
parameter methods
value definesor are down controlled
the to
maximumthe with
maximum the
number parameter:
valueof allowed
transmissions in the forRRC the signalling.
AMD PDU The
that
signalled
value
values
relation isis
ofto to
configured
the
the the RLC
parameters
RLC as entity
such "AM of totimethe
the
RLC UERLC rounded
period entity up
of13.6
Poll_PDU the to the
RNC.
for closest
PS The NRT value
value with allowed
isDCH"signalled and in the
to
"AM
AC "Timer
trigger
This
is
RRC set poll
parameter
equal
signaling.
periodic"
appliedto the The itround
to
ifMaxDAT-1.
defines has
trigger
set
the trip
been the
minimum
is
timer
activated
The
applied
for for
value
the
status
ifvalue
the
with
of
itDCH"
has
SRB timer-based
the the
reporting
been "AM
parameter
kbps RLC
period
activated
when
polling,
isstatus
of
with
the
the
configured the
signalling
report
AM "AM RLC
astriggers
such
RLC for is the for
to
status the
the
RLC
"Timer
PS RLC
NRTperiod
transferred entity
status
with Poll_SDU
over of the
DCH.
periodic"
DCH" UE for
The
parameter.to rounded
PS
set maximumNRT
the up
with
timer to forthe the closest
is instead,
used
timer-based value
as the or
depending down
value
status ofontothe the
reporting,theirAM maximum
activation
RLC
AC SRB
RLC
report
This 13.6
entity
triggers
parameter kbps
of theforwhenRNC
PS
defines signalling
NRT and it
with
thesignalling.
valueis is
DCH" transferred
signalled
of the parameter.
RLCto the overRLC
protocol DCH. entity The
parameter of value
the UE of
Poll_PDU the
rounded parameter up
for the to AM
value
statuses.
timers allowed in the RRC The trigger is applied if it has been activated in with
"Timer
is
the
RLC set toTimer_Poll,
closest
entity
poll"
theof to
AM
value the
set RLCor
SRB
Timer_poll_periodic,
the down timer
timers
13.6
for theawith
totriggers
kbps
sent
Timer_Poll_Prohibit
maximum
when
poll, Timer_status_periodic
the value
signalling and
allowed Timer_Status_Prohibit
is inparameter.
transferred
and
thetriggers
RRC
Timer_RST
over signaling.
DCH. in The
the
"Timer "AM
accordance RLC
poll prohibit"to status
their report
activations
to set thethe timer for
of forthe PS "AM
thefiltering NRT RLC with
out "AM statusDCH"
theparameter report
polls for SRB13.6
AC This
accordance
value
parameter
ofstatus to
theparameter.
parameter
defines
their activations
indicates
value withhow the often
RLC protocol
parameter the sender RLCin
polls
thePoll_SDU
status
the
sender,
receiver reportintriggers for the for AM
with
"Timer
RLC
SRB13.6 DCH"
entity withof prohibit"
the
DCH". SRB The The
to
13.6 set values
value theistimer
kbps of
when the
configured for timers
filtering
signalling as are out
is
such configured
the
transferred
to status
the RLC as over such
reports
entity DCH. toin the
of the
The
the RLC value
RNC.
AC The parameter
accordance
entity of the withdefines the the value
activation ofofthe of
thethe poll RLC trigger protocol 'polling parameter
every Poll_window
Poll_PDU PDU'. forThe the
receiver,
of
The
AM
value
the value
RLC parameter
of is RNC.
entity
the signalled
of
parameter
The
indicates
the SRBtovalues
is the in RLC
13.6
expressed
the number
kbps entity timers
inwhen ofofthe
relation
are
theUE
signalling
signalled
RLC
to rounded
the
SDUs
is
size
to up the
how
transferred
of the toRLCoften
theover
allocated
entity
theDCH.
closest ofvalue
sender the
The
UE or
AC rounded
This
"Poll
polls
down parameter
PDU"
the
to up to
receiver
the to the
set
maximum enables
the
inclosest trigger
accordance tovalue
value activate
polling
allowed or
with down
and
everythe
in theto
deactivate the maximum
Poll_PDU
activation
RRC the
of PDU,
signalling. thepolling value
poll and allowed
trigger status 'pollinginreporting
the everyRRC
value
transmission
signalling.
triggers of and the parameter
window for indicates
theisfor AMR howRLC oftenentity. the It sender
is to transformed polls the13.6 receiver
into the in
corresponding
AC "Poll
Poll_SDU
This SDU"
parameter tothe
SDU'. RLC
setdefines
the value
The timers
triggertherounding polling
value the
configuredofAM every
the RLC as
RLC Poll_SDUentity
such
protocol ofthe the
SDU, RLCSRB
parameter entity kbps
of
MaxDAT the that
RNC. is
for value
the using
The AM
accordance
number
DCH in of
its the
data with AMD the
transfer activation
PDUs direction. of the
The up poll to
followingtrigger
the closest'window
triggers, integer based
timers, and polling'.
andis configured
period The todown
definition the is
"Poll
value
RLC window"
is
entity signalled
of to
the setto
SRB the 3.4 window-based
RLC when entity of
signalling thepolling UE is trigger,
rounded
transferred up to
over the DCH. closest The value
value orof the
configured
AM RLC as
entity. suchThe tovaluethe RLC
ismaximum entity
configured of the
as such RNC. The
to theThe value
RLC is
entity signalled
ofAM thePDU to
RNC. the RLC
AC The
methods
"Last
to the
parameter
entity
parameter
of
are
transmission
maximum
the defines
UERLC
defines
controlled
value PDU
the
rounded
the
with
poll"
allowed
maximum
up
the toinset
toentity
parameter:
the
thenumber
the
closest
status
RRC polling
of
reporting
trigger
signalling.
valuetransmissions
allowed
period
for the
intotrigger
for
the
of the
last
theRRC
AMD
is
AMD applied RLC
PDU
signalling. ifinitThe
that has is
value
relation
'Timer
scheduled
been ispollsignalled
to
activated the
periodic'
for thewith to
first the
round
to
the set RLC trip
the
transmission,
"AM RLC time
timer forof
for
status the
the UE
SRB
report rounded
timer-based3.4
triggers kbps up when
polling,
for the
SRB13.6 the closest
signalling
with value
DCH" is orThe down
AC The
set
trigger parameter
equal is to
applied the defines
MaxDAT-1.
if it has the been minimum
The value
activated status
of the
with reporting
parameter
the "AM period
RLC is of
configured
status the AM
report as RLC such
triggers for to thethe
for
to the
transferred
'Timer maximum
status over value
DCH. allowed
The maximum in the RRC
value signaling.
isoverused The
as the trigger
value is
ofof applied
the AM if
RLC it has
AC
"Last
parameter.
SRB
RLC
SRB13.6
This
been
timers
retransmission
3.4
entity
parameter
activated
kbps
with
Timer_Poll,of periodic'
when
the
DCH" RNC
defines
with
PDU to
signalling
and
parameter.
the the
set
"AMfor
poll" the
isisto
itvalue
RLC
timer
set the
transferred
signalled
of
status the
for to
RLC
the
polling
report the timer-based
RLC
protocol
trigger
DCH.
triggers
Timer_status_periodic, entity forstatus
The
parameter
the
of
for SRB13.6
value
the last
and
reporting,
UE AMD
Poll_PDU the
rounded
with
Timer_RST
PDU
parameter
DCH" forup theintoAM
is
'Timer
scheduled
set
the to
closest poll'
the AM to
for
value set
the
RLC the
or timers timer
retransmission,
down a
Timer_Poll_Prohibit
to the sent
maximum poll, value and Timer_Status_Prohibit
allowed in the RRC signalling. in
AC RLC
parameter.
accordance
'Timer
"Missing
This entity
poll
parameter PDU oftothe
prohibit' their SRB
indicator"
defines to set3.4
activation tothe
the kbps
set
value with
timer
the when the
for
ofreceiver
the the
"AM
filtering
RLC signalling
RLC
to outstatus
detect
protocol the isthe transferred
report
polls missing
parameter in the triggers overfor
sender,
AMD
Poll_SDU DCH.
PDUs, SRB3.4forThe thewith AM
accordance
value of the to their
parameter activationdefines with
how theoften "AM the RLC sender status polls report the triggers
receiver for
in SRB3.4
accordance with
DCH"
'Timer
RLC
DCH" parameter.
"Retransmissionstatus'
entity
parameter. of prohibit
the The
filter
PS
The SRBvalues
to
in
value set
DL 3.4 the
is of
transfer"kbpsthe
timer
configured timers
whentofor set the
as are
filtering
the suchconfigured
RLC out
signalling to the
entity
the is RLCas
status
of such
the
transferred reports
entity RNC to of thetoin
over
the RLC
the
filterDCH.
RNC. entity
receiver,
out The
The of
AC This
with
the parameter
the
RNC. activation
The defines
values of trigger
the
of thepollvalue
the trigger
timers ofare thesignalled
'polling RLCevery protocolto Poll_PDU
the parameter
RLC PDU'.
entity Poll_window
of The the value
UE of
roundedforthe the
'Poll
extra
value PDU' the
is signalledto
retransmissions
of set
parameter theto the of the
indicates
RLC polling
AMD entity how every
PDUs,
of often
thesize Poll_PDU
UE the sender PDU, polls the receiver in
AM toRLC
parameter entity
iswith of
expressed the SRB orin 3.4
relation kbps to whenthe the roundedsignalling
of upisto transferred closest over value DCH. or down The
AC up
This
'Poll
"Expected
accordance
to the the
parameter
SDU'maximum closest
to
status set value
enables
the
reporting
value trigger
activationtodown
allowed activate
polling
period" of
intothe theand
every
to maximum
deactivate
activate
poll
RRC Poll_SDU
trigger thethe
signalling. value
RNCthe
'polling transmission
SDU, allowed
polling
toeveryproduce andin window
Poll_SDUthetheRRC
status expected allocated
SDU'. signalling.
reporting The
value
for the
triggers ofAMR the
and parameter
RLC
the RLC entity. timersindicates
It is transformed
forbasis how
theRLC AM oftenRLC into the the
entity sender
corresponding
ofRNC. polls
the RLC SRB the 3.4 receiver
number
kbps in
of
that is the AMD
using
AC 'Poll
status
value
This window'
isreporting
parameterconfigured to defines
set
period the
as window-based
on
such the to the ofnumberpolling
theentity defined trigger,
of the number Theof status value reports,
is signalled which to
accordance
PDUs
DCH
'Last
are
the RLC in rounding
its
transmission
received data
entity
withtransfer
in up
the
of
theto
thePDU thethe
activation
duration
UE poll'
rounded
minimum
closest
direction. ofto
of integer
set
the
the
Thethe
poll
transmission
up to polling
the
trigger
and
following itfor
trigger
closest
the
'window
iswindow,
configured
triggers
AM
valuefor andbased
theor to status
timers
last
down thepolling'.
AMD AM
to and
reports
thePDURLC The
period
maximum
that
value
entity.
scheduled
willis
AC be
The
This received
configured
value
parameter is as for suchthe
configured PS
to thestreaming
as RLC such entity
to radio
the of bearer
RLCthe RNC.
entityin the
The
of duration
the valueRNC. is of the
signalled
The RLC
value totransmission
is the
signalledRLC
definition
for
"SDU
value
windowthe first
discard
allowed
whenmethods indefines
transmission,
after
data theare MaxDAT
RRC thesignaling.
controlled SDU discard
with
transmissions" The the time
parameter:
trigger to when
define
isallowed the
applied timer-based
statically
inifthe it has whether been SDU SDU discard
activated discard is
with
entity
to the
applied
'Timer
'Last
after
the "AM
of
RLC
poll theperiodic'
for
retransmission
MaxDAT RLC
UE
entity
the AMR ofisto
rounded
retransmissions
status the
RLCtransferred
PDU
reportset UE up the
poll'
totimer
rounded
entities
triggers
theover
to
or of
set
closest
forup
the
No_discard
for the
DCH.
theto
PS
SRB3.4
value
the
polling
The closest
streaming
timer-based
after
parameter
trigger
with MaxDAT
DCH" value
radio
polling,
for the
is
or
bearer
parameter.
used
RRC
down
last
transmissions
when
and
AMD
signalling.
to the DCH
PDU
themaximum
is is
used,
The
used
AC This
expected parameter RLCin defines
status the
reporting AMD PDU is
period retransmission
produced with filtering
the ifstatus period
algorithm in
usingrelation tofor the
trigger
value
in
'Timer
scheduled
and
AM RLC
is applied
allowed
transferring
statusround the
periodic'
forwindowthe
ifdata.
the
trip
it RRC
has toThe
retransmission,
time
been
set
for
signalling.
thevalue
theRLCactivated
PS timerof
and The
the
streaming forwith trigger
parameter theis"AM
the timer-based
radio is RLC
applied
bearer defined status
when
it has report
been
in reporting,
relation
data is to the
triggers
activatedthe value
transferred
with
AC transmission
SRB3.4
This
the
of "AM
the parameter
RAB with
RLC DCH" defines
status
attribute size,
parameter.
report
Transfer the AM value
triggersdelay. of RTT,
forthe
The RLC
SRB3.4 maximum
value protocol
with
of the status
DCH"
AM parameter
RLC report
parameter.timer period,
MaxDAT Timer_Discardand for the
the AM
'Timer
'Missing
"In
over
value sequence
DCH.
ofpoll'PDU
this toparameter
The set
delivery
RLC the timer
indicator' timer
ofas toSDUs forused
set
is
inputs. ainsent
the receiver
UE" poll,
in filtering to define to out detect whether
extra theretransmissions
missing
the RLCAMD entity PDUs.
ofofthe theAMD UE is
AC RLC
achieved
'Timer
delivers
The entity
poll by of the
multiplying
prohibit'
the timer received PS to streaming
set
SDUs the the value
tothetimer radio
upper of for thebearers Transfer
filtering
layers in when
out
sequencedelay
the data with
polls is transferred
inthe
regardless the value
sender,
of of over
the the DCH.
value ofAMThe
the
If theparameter
PDUs.
value
parameter. of The
expectedthe The
defines
parameter is started
status
value of
the in
reporting
defines
the
value
the
Timer_discard
of
sender
period the
maximum isRLC for
smalleris
aprotocol
number than parameter
particular
configured thereceived
of maximum
transmissions
as such
MaxMRW
status
to status
the forreport,
RLC
for the
reporting
the AMD
entity
which
of
'Timer
RAB
RLC
is indicating
period status'
attribute
entity
defined of a prohibit
Delivery
the
missing
with PS "AM toAMD set
Order.
streaming RLC the
PDU. timer
radio
status While for
bearer
period filtering
the max when
timer out
for isdata
PS the
running, isstatus
transferred
streaming all reports
status
with in
over
reports
DCH" the DCH. receiver, The
AC This
PDU,
the parameter
RNC, which isvalue
however, setdefinesequal
the the
tofield"
maximum value
the of
MaxDAT-1.
allowedthe RLC The
value protocol
value
is 10000 of parameter
the ms. parameter
The MaxRST
value is for
configured
of the the AM
'Poll
"Use
value
received
parameter,PDU'
special
of the to
bythe the set
parameter
the the
sender,
Poll_PDU of trigger
HE defines
except
poll polling to
the
ACK
trigger every
switch
maximum
SUFIs,
isbearer
used Poll_PDU
on/off are the
number PDU,
use
discarded;
forsignalled
the ofof special
transmissions
NACKs HE field
in RNC thefor value.
the
status move
RLC
as suchentity to of theRLC PSentity streaming radio which isRLC toentity
transfering of the
data over orthe
ofDCH. theUE UE.
The
AC Timer_discard
This
'Poll
MRW
reports
The
value
parameter
SDU'
command,
value
of do the
to
not
of set
the
is signalled
defines
the
trigger
parameter which
Poll_PDU trigger is of
the
definesset
retransmission poll
the
tomaximum
the
pollingequal RNC
RLC
trigger
the toofand
every
maximum
entity
status
the
is anyset
itMaxMRW-1.
Poll_SDU is
of
ofequal
the
reporting
the
number
UE
AMD
toSDU, the
rounded
period
of The
PDUs
the ofRLC
value
expected
transmissions
up
AM
indicatedoftoentity
RLC the
the
status for
closest
in
parameter
missing. relation
period
the RLC
to
is
rounded
value
'Poll
configured or
window' upas
down totosuch
the
to the
set closest
the
to maximum
the valueentity
window-based
RLC or down
value allowed
of polling
theto the RNC inmaximum
the
trigger, and RRC it is value allowed
signalling.
signalled to the inRLC the RRC entity
AC When
This
assuming
RESET
signalling. an
parameter
PDU,ACK
the maximum is
which received
defines is set the for
transportminimum
equal the last
tochannel missing
thestatus MaxRST-1. user AMD
reportingdata PDU,
The period
rate. value which
The for was
the PS
ofvalue included
which
parameter streaming is is in the
'Last
of
radiothetransmission
status
signalled UE
report
bearer rounded
to ofsuch
when
the the
UE PDU
uptimer,
data
is tois
roundedpoll'
thethe totimer
closest
transferred set the
down isvalue polling
stopped.
to over the orDCH.
closesttrigger
downAfter The tothe
value for
the
value the
expirationlast
maximum
of
allowed the AMD value
ofto PDU
the
parameter
in the RRCtimer, scheduled
allowed aset
is entity newinto
AC configured
This parameter as defines to the the RLC minimum entity of
value the RNC
of the and
RLC it is signalled
protocol parameter the RLCPoll_PDU for th
for
the
the the
RRC
retransmission
AM
signalling; first
RLC iftransmission,
signaling.
timers
the isvalue Parameter
triggered
Timer_Poll_Prohibit
exceeds based isthe significant
on the
maximum, andlast onlystatus if the
which report
the SDU RRC discard
received signaling after
while
in MaxDAT
accordance the
allows, timer the
of the UE rounded up to the closest value or down to the maximum value allowed in
AC 'Last
This
was
with
Poll_SDU retransmission
retransmissions
parameter
running.
their activations
trigger If no or
defines the
isstatus PDU
with
configured the poll'
timer-based
report
the value "AMto set
is of
instead SDU
received
RLC the
theto polling
discard
RLC
statusthe during
RLC trigger
protocol
report is theapplied.
entity for
parameter
timer,
triggers the
of the afor last
new
UE. PS AMD
Poll_SDU PDU
retransmission
streaming
The value foriswiththe is AM RLC
the RRC signalling.
scheduled
triggered
DCH"
signalled parameter.
to for
based the the on
RLC retransmission,
The the entity next
value of status
is the UEand
configured report rounded received
as such
down toafterthe
to thethe
RLC expiration
closest entity of
value of
the the RNC.
allowed timer. The
in A AM
AC This
'Missing parameter PDU defines to
indicator' theset value the of the RLC
receiver to protocol
detect the parameter
missing AMDPoll_window for the
retransmission
value
the RRC is signalled
signalling. filterto The timer
the RLC is used
expected entity in the
of
value the RLC
isUE used entity
rounded for of the
Poll_PDU up RNC
to the andonly,
closest ifPDUs.
Poll_SDU it value
has been or down
AC This
to theparameter
activated
regardless maximum with of theirthe enables
"AM
valueactivation RLC to activate
allowed status in the
statuses. and
report RRC deactivate
triggers
signalling. for the PS polling
streaming and status with DCH" reporting
AC triggers
parameter.
The algorithmand the is RLC
not timers
applied for
if
This parameter defines the offset value for the maximum status reporting period it the
has AM not RLCbeen entity
activated of the PS
with streaming
the "AM RLC RAB status that of is the AM SRB 13.6 k
using DCH in its data transfer
report triggers for PS streaming with DCH" parameter; the triggers Poll_PDU and direction. The following triggers and timers and period
AC This
definitionparameter methods defines are controlledthe minimum number for the AM RLC status reports that will
Poll_SDU
When
be receivedvalue areis configured
for changed
the PS it to
interactive takenwith
is conform into
and
tothe theparameter:
account
background
values onlyof for
radio
thenew parameters
bearers connections. "AM RLC period
in the duration of the
AC "Timer
This
Poll_PDU poll
parameter periodic"
for PSdefines streamingto set
the valuethe timer
with DCH" for
of theand the
RLC timer-based
"AM protocolRLC period polling,
parameter Poll_SDU MaxDAT for for PS the AM
RLC
"Timer
RLC transmission
entitystatus of the periodic" window
PS interactive to set thewhen data
timer
and is transferred
foron
background the timer-based radio over E-DCH.
bearers status when The
reporting, parameter
data isfor the is
AC streaming
This parameter with DCH"
defines instead,
the value dependingof the RLCtheir protocol activation parameter statuses. MaxMRW AM
used
"Timer
transferredwhen poll" the
to
over expected
set the
E-DCH. timer RLC for
The value status
a sent reporting
poll,
ofbackground
the parameter period is
defines produced thewhen with
maximum the algorithm
number of
AC RLC
using
"Timer entity
thepoll
This parameterfor of the
transmission
prohibit" PS
defines to interactive
window
set the
the PDU, timer
valuewhich and
size, forAM
of the is RLC
filtering
RLC RTT,
out
protocol radiomaximum
the bearers
polls
parameter in status
the sender,
MaxRST data
report isperiod,
transmissions
transferred over the AMD
E-DCH. set equal todefines the MaxDAT-1. The for value theofAM
and
"Timer
RLC
the the
entity
parameter value
status of of
theis this
prohibit"PS parameter
signalled to The
interactive set to
value
the
the astimer
and
RLC
ofbackground
inputs. the
entity
parameter
for filtering of the out
radio
UE the status
bearers
rounded
thewhen
up
maximum
reportsto data
the isnumber
inclosest
the value
of
transmissions
If the
receiver,
transferred expected over forstatusthe
E-DCH. move
reporting MRW command,
period is smaller
The value of the parameter defines the maximum number of which than is set
the equal
maximum to the MaxMRW-1.
status reporting
allowed
The in of the RRC signaling.
"Pollvalue
period PDU"
transmissions defined tothe setwith
for parameter
thethe "AMRESET
trigger
RLC is
RLC signalled
polling statusevery
PDU, to
periodthe RLC
Poll_PDU
which max
is set entity
for
PDU,
equal PSofNRT thethe
to UEwith rounded
E-DCH"up
MaxRST-1. The to the
closest
parameter,
"Poll SDU" value to allowed
set the in
trigger the RRC
value of the parameter is signalled to the RLC entity of the UE rounded up to the UE.
the poll trigger Poll_PDU
polling signalling.
is
every used Poll_SDUThe
for theparameter
RLC
SDU, entity is significant
of the RNC only or if
the the
SDU
The
"Poll
closest discard
value
window"value of the after
to set
allowed MaxDAT
Poll_PDU the theis
in window-based retransmissions
RRC set equal signalling. to theisexpected
polling applied.
trigger, status reporting period
assuming
"Last transmission the maximum PDU poll" transport to setchannel the polling usertrigger data rate. for the If the lastvalue AMDexceeds PDU the
maximum,
scheduled for which thethe firstRRC transmission,signaling allows, the trigger Poll_SDU is configured
instead. The value is PDU
"Last retransmission signalled poll" to to the set RLC the polling entity of the UE
trigger for rounded
the last AMD downPDU to the
AC This parameter defines the maximum status reporting period of the AM RLC in
AC relation
This parameter to the RLC defines round thetrip time for status
minimum the PSreporting interactive period and of background
the AM RLC radio for the
bearers
PS interactivewhen data
and is transferred
background radioover E-DCH.
bearers when The maximum
data is value
transferred is used
over as
E-DCH. the
AC This
value parameter
of the AM defines
RLC timers the minimum Timer_Poll, value of the RLC protocol
Timer_poll_periodic, parameter Poll_PDU
Timer_status_periodic,
The
for thevalueAM of RLC theentity parameter ofthe thevalue isPS setinteractive
to the AMand RLCbackground timers Timer_Poll_Prohibit radioPoll_SDU bearers when and data
AC and
This Timer_MRW
parameter
Timer_Status_Prohibit and Timer_RST
defines in accordance in the
of accordance
with RLC their protocol with their
activations parameter activations
with the "AM with RLC the
forstatus"AM
the AM
is
RLC
RLC transferred
status
entity of over
report
the PS E-DCH.
triggersinteractive The
for PS value
and NRT ofwith
background the parameter
E-DCH" radio indicates
parameter.
bearers The
when how often
value
data is
is the
AC report
This
sender triggers
parameter
pollsas the for PS
defines
receiver NRT the with
inRLC value
accordanceE-DCH"of the parameter.
RLC
with protocol
the The
activation value
parameter ofisthe is configured
Poll_window
poll trigger as such
for
'polling the
configured
transferred
to the RLC over
entity such E-DCH.
of to
the the The
RNC. value
The entity of
value ofthe the
is RNC.
parameter
signalled The to value
indicates
the RLC signalled
in number
entity of to of
the the the
UE RLCRLC
AC AM
every
entity
This RLC Poll_PDU
of
parameter entity
the UEthe of the
PDU'.
rounded
enables PS The to interactive
up value
to
activate the of and
the
closest
and background
parameter
value
deactivate or is
down
the radio
expressedto
polling bearers
the and in
maximum when
relation
status data to
value theis size
SDUs
rounded
transferred
of the
how upoften
allocated to
over the
E-DCH.closest
transmission
sender Thevalue polls
value
window orthe ofreceiver
down the
for toparameter
the the AMR
inmaximum
accordance
RLC indicates value
entity.
with
Ithow
the
allowed often
istotransformed inreporting
activationthe thesender RRC of the
intoof
allowed
triggers
poll trigger
signalling. in
and the the
'polling RRC RLC signalling.
every timers Poll_SDU for the AM
SDU'. RLC The entityvalue of isthe PS
signalled interactive the RLCor entity
AC This
polls
the parameter
the receiver
corresponding defines
in accordance
number the minimum
of the with
AMD number
the activation of the AM
of the RLC poll status
trigger reports
'window that based will it
background
the
be UE rounded
received RAB
for up
the that PS is
tosignalled
the using
streamingclosest E-DCH value
radio inPDUs
oritsentity
bearers data
down rounding
in transfer
to updirection.
theduration
the maximum to the
of
closest
The
value
the RLC
integer
following
allowed and
in the
AC polling'.
is
Thisconfigured
triggers The
parameter
and value
to defines
timers the isAM
and RLC
the SDU
period to
entity. the
discard
definition RLC
Poll_PDU time
methods can
when of arethe
beactivated
thesetUE rounded
to a with
timer-based
controlled bigger with upvalue
SDU
the to the with
discard
parameter: closest
other is
RRC signalling.
transmission window The trigger
when is
data appliedis if
transferred it has been
over E-DCH. The the
parameter "AM RLC status
value
means.
applied
'Timer allowed
Theperiodic'
for
poll thevalueinAMR the isto RRC
signalled
RLC set signalling.
entities
the toE-DCH"
timer the
of The
RLC
the PS trigger
entity
streaming is the
of applied UE
radio ifbearer
it has
rounded been
up toE-DCH
and theisclosest
activated used is AM with
AC report
This
when
the triggers
parameter
the expected
AMRLCOnEDCHOfNRTPSTriggers for PS
defines RLC NRT the with
status value offor
reporting thethe timer-based
parameter.
RLCperiod
parameter. protocol is produced polling,
parameter with MaxDAT
the algorithm for the using
value
used or
instatusdown
transferring to the maximum value allowed in the RRC signalling. The trigger is
'Timer
RLC
the entity
transmission of periodic'
thedefines PSthe
window todata.
streaming set
size, theThe
AM radio value
timer
ofRLC bearersofthe
forRTT, thetimer-based
parameter
when
maximum data is
is
status
defined
status
transferred
report
in relation
reporting, over for
period, E-DCH. to the
AC This
applied
value
'Timer parameter
of ifthe
poll' it tohas
RABset been attribute
the timer the
activated value
Transfer
for a with
sent the
the
delay.
poll, RLC
"AM The protocol
RLC value status of parameter
the report
AM MaxMRW
triggers
RLC timer for PSand thethe
NRT AM
The
value
RLC value
of
entity thisofof the
parameter
the parameter
PS as
streaming defines
inputs. radio the maximum
bearers when number
data is of transmissions
transferred over for
E-DCH. the
with
'Timer E-DCH"
Timer_Discard poll prohibit' parameter.
is achieved by multiplying the value of the Transfer delay with the
AC This
AMD
If
The
parameter
thevaluePDU,
expected of which
the status istoset
defines
parameter
set the
equal
reporting thevalue timer
definestoperiod offor
the the filtering
MaxDAT-1.RLC
ismaximum
smaller outThe
protocol thanpolls value
thein the
parameter sender,
of transmissions
maximum the MaxRST
parameter
status for isthe
reporting AM
value
'Timer
RLC
signalled of
entity the
status'to of parameter.
the prohibit
the RLC PS to The
streaming
entity set of value
the the timer
radioUEofthe the
for
bearers
rounded Timer_discard
filtering when
up out
to
numberstatus
data
the is is
closest
of
configured
reports
transferred value in as
the such
over
allowed
for
receiver, to
E-DCH.in
the the
the
AC period
This
move
RLC defined
parameter
MRW
entity ofcommand,
the with
defines
RNC, the "AM the maximum
which
however, RLC is set status
the equal status
maximum period
to the max
reporting MaxMRW-1.
allowed forperiod
PS
value stream ofis the
The 10000 with
AM E-DCH"
value RLC
ms.of the Thein value
'Poll
The
RRC PDU'
value
parameter, signaling. to
of the set
the pollthe
parameter trigger
trigger polling
defines
Poll_PDU every
theis used Poll_PDU
maximum for the PDU,
number
RLC of transmissions
entity of the RNC orfor thetheis UE.
AC relation
parameter
of
ThistheSDU' to the
is
Timer_discard
parameter RLC
signalled
defines round to
is signalled
the trip
the time
RLC
minimum for
entity
toeverythe the
status of
RLC PS the streaming
UE
entity ofSDU,
reporting roundedthe radio
period UE of up bearers
to
roundedthe ofthe AMthe when
closest
up RLC to data
the value
for the PS
'Poll
RLC
The RESET
value
transferred
to the
of over
set
PDU, the
Poll_PDU
E-DCH.
trigger
which is
The
polling
isset set equal
maximum equal to to Poll_SDU
the
value the MaxRST-1.
expected
is used as The
status
the value
valuereporting of the parameter
period
AM RLC is s
allowed
closest
'Poll
signalledwindow' in
value
to thetheto RRC
or RLC down
set signalling.
the towindow-based
entity theofmaximum theThe UE parameter value allowed
polling
rounded trigger,
up significant
to the in closest
the RRC only if
value the SDU
signalling.
allowed discard in the
AC This
assuming
timers
after parameter the maximum
Timer_Poll,
MaxDAT defines the
transport
retransmissions minimum channel value of the
user
Timer_status_periodic, data RLC rate.protocolIf theand parameter
value exceeds
Timer_MRW Poll_PDU the and
'Last
RRC
for the
maximum transmission
signalling.
AM RLC
which entity
the PDU RRC of poll'
the to is
PS
signaling set applied.
the
streaming allows, polling radio
the trigger bearers
trigger for the
when
Poll_SDU lastdata AMD
is is PDU
transferred
configured scheduled
AC Timer_RST
This parameter in accordance with their activations
defines the value of the RLC protocol parameter Poll_SDU for the AM with the "AM RLC status report
for
over the first
E-DCH. transmission,
The value of the parameter indicates of how often the sender
instead.
triggers
RLC entity The
for PS
of value
the streamPS is streaming
signalled
with E-DCH" to theparameter. RLC entity The the
value UE isrounded
configured down aspolls
tosuch the the to the
AC 'Last
This
receiver
closest retransmission
parameterin
value accordance
alloweddefines PDU in the
with
the poll'value
the
RRC toradioset
of
activation the
signalling.
bearers
the polling
RLC of the
The
when
protocoltrigger
poll
expected
data foristhe
parameter
trigger
transferred
lastPoll_window
'polling
value is AMDevery
used
over
PDU Poll_PDU
for
E-DCH. for the
Poll_PDU
RLC
The entity
valueentity ofof the RNC. The value is signalled to the RLC entity of the UE rounded theE- up
scheduled
AM RLC forthe theof parameter
retransmission,
the indicatesradio in number ofwhen the RLC SDUs how often
AC PDU'.
and
to the
This
sender The
Poll_SDU
closest
parameter
polls valuethevalue of
regardless
enables
receiver orPS
the down thestreaming
parameter
inofaccordance
their
activation ismaximum
to theactivation expressed
and bearers
with statuses.
value
deactivation
the inactivation
relation
allowed data
of to
the
of
ispolling
inthe
the
transferred
the size RRC
poll of
and the over
signalling.
trigger statusallocated
'polling
'Missing
DCH. The PDU value indicator'
of the tothe
parametersetAMR if the receiver
indicates to detect thethe missing AMD PDUs,
AC
transmission
The
reporting
every
'Expected
This
algorithm
Poll_SDU
parameter triggers
status
window
is SDU'.
notand
reporting
defines
for
applied
theThethe RLC value
period'
value
ittimers
has RLC
is
to
of
not for
signalled
activate
the RLC thehow
entity.
been AMIt
to
the
protocol
isoften
activatedRLC
the transformed
RNC RLC to
with
entity sender
entity
produce
parameter
thethe
of into
of"AM
polls
the
PS
the
the
MaxDAT
RLC
UE
the
streaming
expected
receiver
corresponding
status
rounded
forand thestatus RAB
AM up
in
accordance
number
report
that of
triggers
isentity
using the with
E-DCHAMD
for thePS activation
PDUsstream
ininteractive
its rounding
data withof the
transferE-DCH"up poll to trigger
the
parameter;
direction. closest 'window
The integer
the
followingbased
triggers and polling'.
it
triggers, is
Poll_PDU The
configured
timers valueand to is
to the
reporting closest period value on or
the down
basis toof the
the maximum
defined value toofallowed in the RRC signalling.
AC RLC
signalled
the AM
Poll_SDU
This
period
The RLC
parameter
definition
trigger
ofthe
toare
is
the
entity. RLC PS
configured
applieddefines
methods entity
Poll_PDUif the
it to
are
has
of the
can
conform
value and
controlled
been
UE
be
of background
rounded
setthe
to
the
activated RLC
with anumber
to values protocol
the
with
radio
up parameter:
bigger the
of
the
value
the status
bearers
"AM
closestwithreports,
parameters
parameter RLC
when
value
otherMaxMRW
status
which
data
allowed
means.
"AMreport
isfor
RLC will
Theinthe be
theAM
period
triggers
received
transferred
RRC
value
Poll_PDU is in
signalling. the
over
signalled
for duration
FACH/RACH.
The to trigger
the of
RLC theis transmission
The
applied
entity value
of if
the it of
has
UE window,
the been
roundedparameter and
activated
up to defines
thewith the
the
closest maximum
"AM value RLC or status
down
AC RLC
'Timer
for
This PS entity
poll
stream
parameter of PS the
periodic' with stream
PS
defines tointeractive
E-DCH" set the
with
the E-DCH"
timer
parameter.
value and of for
the
and
background
theRLC
"AM RLC
timer-based
protocol radio period
bearers
polling,
parameter
Poll_SDU when MaxRST
for PS
data is stream
'SDU
number
report
to
withthe discard
of
triggers
maximum
E-DCH" after
transmissions
for
instead, PS
value MaxDAT stream
allowed
depending for transmissions'
thewithin AMDon PDU,
E-DCH"parameter.
the RRC
their towhichdefine
signalling.
activation is statically
setThe
statuses. equal
trigger whether
to the
is applied the for
MaxDAT-1. SDUif
theThe
it has
AM
transferred
'Timer
RLC status
entity over
of periodic'
the FACH/RACH.
PS toisset
interactive theThe timer
and value for
background of the
the parameter
timer-based radio bearers defines
status when thedata
reporting, maximum is
AC discard
value
This of after
parameterthe MaxDAT
parameter defines retransmissions
the configured
maximum as or such
status No_discard to
reportingthe RLC
triggersperiod after MaxDAT
entity
PSofstream of the transmissions
RNC and it is
been
number
'Timer activated
of transmissions with thethe "AM forfor RLC
the movestatus MRW report command, for
which isthe setthe AM with
equal RLC to in
E-DCH" the the
shall
signalled
relation
parameter.bepoll'
transferred used.
to
to
totheover
the set
RLC FACH/RACH.
RLC round
timer
entity of the
trip
aThe
time
sentUE for
poll,
valuerounded
the of
PS the upparameter
interactive to theas closest
and defines value
background ormaximum
downradio to of the
AC MaxMRW-1.
'Timer
This
number poll
parameter
of The
prohibit'
transmissions value
defines to setthe of the
the
for parameter
timer
minimum
the RLC for status
RESET is
filtering configured out polls
reporting
PDU, whichperiod such
in the is set to
ofsender,
the the
equal AMto RLC RLC the entity
for the
maximum
bearers when value data allowed is transferred in the RRC signalling.
overbearers FACH/RACH. The is maximum
the
'Timer
PS RNC
interactive
MaxRST-1. and
status' The itprohibit
andisvalue
signaled to
background of set
the tothe theradio
parameter RLC
timer entity
for is filtering ofwhen
configured UE out rounded
status
dataas such uptotothe
reports
transferred the invalue
closest
RLCtheover is used
receiver,
entity value of the
asor
AC This
the
down parameter
valueto of
the the
maximum defines
timers AM the
value RLCvalue
allowed of the
timers in RLC
Timer_Poll,
the RRC protocol parameter
signalling. The Poll_PDU
parameter for the
is AM
'Poll
RNC PDU'
FACH/RACH. and it of to set
is the ThePS
signalledthe valuetrigger toofthe polling
theRLC parameter every
entity Poll_PDU
of isthe setUE toradiothePDU,
roundedAM RLC up when timers
to thewith closest value or
RLC entity
significant only interactive
Timer_MRW, and background
and Timer_RST inbearers
accordance data is
their
AC This
'Poll parameter
SDU'
to theto
Timer_Poll_Prohibit setifdefines
theand
the SDU
trigger the discard
value
polling
Timer_Status_Prohibit ofafterthe
every in MaxDAT
RLCPoll_SDU protocol retransmissions
SDU, parameter is their
Poll_SDUapplied. for the AM
down
transferred
activations
RLC entity
maximum
over
with
of the FACH/RACH.
the PS "AM value
interactiveRLC allowed
The
statusand value
report the
background the in
RRC
oftriggers accordance
signalling.
parameter
radio for PS
bearers defines
NRT
with
withhow
when FACH/RACH"
data
activations
often is the
AC 'Poll
with
This window'
the "AM
parameter to
RLC set the
status window-based
report triggers polling
for PS trigger,
NRT with FACH/RACH" parameter.
sender
parameter.
transferred pollsThe thedefines
over receiver
values
FACH/RACH. of the in
the value
accordance
timers
The
of the are
value
RLC
with
configured
of the
protocol
the activation
parameter as parameter
such of to the
indicates the Poll_window
pollRLC in trigger
entity
number offorthe
'pollingof
the
'Last
The
AM transmission
value
RLC is configured
entity of PDU
the PS poll'
as suchto set
interactive toofthe and polling
RLC background trigger
entity ofisthefor
radio the
RNC. lastThe
bearers AMD value
when PDU is
data scheduled
signalled
is
every
RNC. Poll_PDU
The PDU'. The value the parameter expressed in relation to the size
AC This
RLC
for
to the
the SDUs firstvalues
parameter
RLC howshows
transmission,
entity of the
often
of the the
the timers
UE polling
sender
rounded arepolls signalled
and up status
theofthe to
receiver the RLC
reporting entity
triggers
in accordance orItof and the UE
the
with to the rounded
RLC timers
activation upfor
transferred
of
to
the
of the
theAM transmission
closest
pollRLC over value
entity
trigger
FACH/RACH.
ofwindow
'pollingor the down PS
every allocated
to The
the
interactive
Poll_SDU
value
maximumforto or the
SDU'.
the
AMR closest
value
background parameter
The RLC value
allowed
value entity.
RAB indicates
is in
in
down
the
the
configured RRC how
is transformed
FACH/RACH
the oftenmaximum
signalling.
as such
the
into to
AC 'Last
value
This
sender retransmission
allowed
parameter
polls the indefines
thenumber
receiver PDU
RRC the poll'
insignalling.
value to
accordance set the
of thePDUs polling
RLC
with the protocoltrigger
activation for
parameter the
of last
theclosest AMD
MaxDAT
poll PDU
trigger for'windowtheand AMit
the
the corresponding
transport
RLC channel
entity of configuration.
the RNC. of
The thevalue AMD
The following
isis signalled rounding
triggers to the up
and RLC to the
timers entity and of period
the integer
UEvalue
scheduled
RLC
based entity
polling'. for
of the
the The retransmission,
SRB value when is signalling
configured as transferred
such to the over
RLC FACH/RACH.
entity of the The
RNC. The of
AC is
Thisconfigured
parameter to the
defines AM RLC
thevalue entity.
maximum The value
status is
reporting configured as such to the RLC entity
definition
rounded
'Missing
the
value parameter
is
methods
up
PDU
signalledto indicator'
the
defines to
are the
closest
the
shown
toRLC set
maximum with
the
entity
the
orreceiver
down
of
parameter:
number
the toUEtothe detect
of maximum
rounded theperiod
transmissions up value
missing
to the
in relation
for allowed
AMD the
closest PDUs,
AMD
to
in the
value the
PDU,
RLC
RRC
allowed
of the
round RNC.
trip time The for valuethetoSRB is signalled
when to
ifsignalling the RLC is entity
transferred of the UE
over rounded up to the
AC "Timer
signalling.
'Expected
This ispoll
theparameter
which set periodic"
The
status
equal trigger
reporting
definesto theis setthe the
applied
period'
minimum
MaxDAT-1. timer for
it has
to activate
status
The the
been
value timer-based
iftheitactivated
reporting of RNC
thebeen polling,
towith
period produce
parameter forFACH/RACH.
the "AM
the the AM RLC thestatus
expected
RLC The
of asSRBstatus
in
closest
maximum
"Timer
report
RRC value
status
triggers
signalling.
value or for down
is
periodic" PSused NRT
The
toto asthe
settrigger
the
with maximum
the value is
timer
FACH/RACH"
applied
of value
forthe the AM allowedhas
RLC
timer-based
parameter. in the
timers RRCisreporting,
activated
Timer_Poll,
status
configured
with
signalling. "AM
The such
RLC
reporting
when
to the
status RLC
report period
signalling entity
triggers on
is of the
transferred
the for basis
RNC
PS NRT of
over
and the it
with defined
FACH/RACH.
is signaled
FACH/RACH" number to The
the of RLCstatus
value
parameter. of
entity reports,
the of the which
parameter UE will
rounded is be to
set
AC This
trigger parameter
is
"Timer poll"appliedto set defines
iftheit has timer thebeen value
Timer_status_periodic, of the
activated
for transmission
atosent poll,RLC
withand protocol
the "AM RLC
Timer_RST parameter status Poll_PDU
in accordance report triggers for
withthe forAM
their
received
the
up toAM the RLCin the
closest timers duration
value orof
Timer_Poll_Prohibit the
down the and
maximum window.
value allowed inFACH/RACH"
the in RRCaccordance signalling.
AC RLC
PS
"Timer NRT
This theirentity
activations poll
parameterwith of
with the
FACH/RACH"
prohibit" the SRB
defines "AM
to when
set RLC
the the signalling
parameter.
value status
timer report
for is transferred
filtering triggers out for
the overSRB
polls FACH/RACH.
with
in the sender, The value of
with
the parameter activations indicates with how the "AMof
often RLC
the
the statusRLC protocol
sender report
polls the
parameter
triggers
receiver for in Poll_SDU
SRB with for the
accordance with
AM
parameter.
"Timer
RLC
FACH/RACH" status
entity of the The values
prohibit" SRB when
parameter. of
to the
set
The timers
the timer
signalling
value are for configured
isRLC
is configured filtering
transferred out as
as over the
suchsuch statusto
FACH/RACH.
to the the reports
RLC RLC entity
in
entity Theofthe of
value the
thethe of
AC This
the
RNC. parameter
activation
The values of defines
the the the
poll
ofsignalled trigger
timers value are ofsignalled
'polling the every protocol
toPoll_PDU
the RLC parameter
PDU'.
entity The
of Poll_window
the value
UE of the
rounded for up
receiver,
the
RNC. parameter
The value indicates
is in number
to the of
RLC RLC entity SDUs of how
the UE oftenrounded the senderup to polls
the the
closest
AM RLC
parameter entity
is of theorSRB when signalling is transferred over FACH/RACH. The
AC to
Thisthe
"Poll
receiver
value closest
parameter
PDU"
or in
down toexpressed
value
set
accordancetoenables
the maximum
the down
trigger in
to relation
with to the
activate
polling
the to
activation
value
thedeactivate
maximum
and
everyallowed
size
Poll_PDU
ofthe theof the
value
insender
the
allocated
allowed
pollpollingPDU,
trigger
RRC and in transmission
'polling
signalling. the
status RRC signalling.
reporting
every window
Poll_SDU
value
for the
triggers ofAMR the
andvalue parameter
RLC entity. indicates
It is transformed how often into the corresponding polls the receiver
number in
of the AMD
AC "Poll
SDU'.
This SDU"
The
parameter tothesetRLC isthe timers
trigger
configured for
polling
as the such AM
every RLC
to Poll_SDU
the entity
RLC ofSDU,
entity the of SRB inRNC.
thestatus the FACH/RACH
TheThe value iswillis
accordance
PDUs
transport roundingchannelwithdefines
up the to activation
the
configuration.
the minimum
closest ofThe integer number
the following
poll trigger
and itfor is the
'window AM
configured
triggers and
RLC
based to
timers thepolling'.
AM
and
reports
RLC
period
that
value
entity.
"Poll
signalled
be window"
received to the
for to set
RLC
the PS the
entity window-based
interactive of the UE
and polling
rounded
background trigger,
up to the closest value or down to the
AC configured
The value
parameter
definition
"Last
maximum isas
methods
transmissionvalue
such
configured
defines
allowedareto the
PDUcontrolled as
the RLC
poll"
in such
AMD
the toRRC
entity
to
PDU
setwith the
the
ofthe theparameter:
RLC
retransmission
polling
signalling.
RNC.
entity trigger
The ofradio
The the value bearers
for RNC.
filtering
trigger the is
isperiod
last
applied
in value
signalled
The AMD
the
inif
duration
toisthe
relation
PDU
it has signalled
been toofthe
RLC the
RLC
entity
to
RLC the transmission
of
RLC
round the UE
entity
trip rounded
time of window
the
for UE
the up when
PS to
rounded the data closest
interactive up is transferred
to value
the
and closestallowed
background over value HS-DSCH.
in the
or
radio RRC
down bearers The
signalling.
to the parameter
when maximum The
data is
is
AC 'Timer
scheduled
activated
This
used pollwith
parameter
when periodic'
for
the the first
"AM
defines
expected to transmission,
set
RLCthe the
RLC value timer
status status of for
report
the theRLC
reporting timer-based
triggers protocol
period for SRB polling,
parameter
is with
produced FACH/RACH"
MaxDAT
with the for the
algorithm AM
trigger
value
transferred
'Timer is
allowed
statusapplied
over in if
the it
HS-DSCH. has
RRC been
signalling.
The activated
RLC The timer with
trigger
is the
used is"AM applied
in RLC
filtering status
if it has
out report
been
extra triggers
activated for with
"Last
parameter.
RLC
using retransmission
entity
the of periodic'
thedefines
transmission PS PDU towindow
interactive set poll" thesize,to timer
and setAM forRLC
the
background the
polling timer-based
RTT, trigger
radio maximum forstatus
bearers the last whenreporting,
AMD dataPDU isperiod,
AC SRB
This
the
'Timer "AM
scheduled
with
parameter
retransmissions
transferred poll'RLCFACH/RACH"
to
for
over
status
set
the of the the reportAMD
timer
retransmission,
HS-DSCH.
parameter.
the forvalue
triggers
PDUs.
The a sentoffor
value
the
The poll,SRB
of
RLC
timer
the
withprotocol
is
parameter
FACH/RACH"
started parameter
in the status
defines sender MaxMRW
parameter.
the
report
for a particular
maximum
for the AM
and
RLC
receivedthe
entity value of
status ofreport
the this
PS parameter
interactive
that indicates as
and inputs.
background
a missing AMD radio PDU. bearers While whenthe data
timer is
is running,
AC 'Timer
"Missing
This
number
If the poll
parameter PDU prohibit'
of transmissions
expected indicator" to
definesreporting
status set to
the the set
forvalue timer
the
theperiod AMD for
receiver
of the filtering
isRLC
PDU, to
smaller out
detect
protocol
which thanthe the
is set polls missing
parameter
equal
thedefines in
maximum the
tothe AMDsender,
MaxRST
themaximum PDUs,
MaxDAT-1.
status for theThe
reporting AM
transferred
all
"SDU
RLC status
'Timer status'
discard
entity over
reports
of prohibit
after
the HS-DSCH.
received
PS MaxDAT to set
interactive by The
the the value
sender,
timer
transmissions"
and forof
background the
except
filtering
to parameter ACK
defineout
radio the SUFIs,status
statically
bearers are reports
whether
when discarded;
data in
the theisSDU NACKs
receiver,
AC value
period
This
number of
parameterthe
defined
of to parameter
with
transmissions defines the is
"AM
the configured
RLC
maximum
fortrigger
the move status as such
status
MRW period to
reporting
command,the
max RLC
for PS
periodentity
which NRT of
ofisAMD with
the the
setAM RNC.
HS-DSCH"
equal RLC to inthe are
in thePDU'
'Poll status reports the do
setPoll_PDU trigger not polling retransmission
every Poll_PDU of any of MaxDAT
the PDUs indicated
discard
transferred
parameter,
relation
MaxMRW-1.
missing.
after
to the
When theMaxDAT
over
The RLCan
HS-DSCH.
value
ACKround
retransmissions
of
is poll
trip
the
The
received trigger
time value
parameter for
for istheor
of
used
the
No_discard
the
isPSlast
parameter
for the PDU,
interactive
configured missing RLC after
as
AMD
defines
entity
and
such ofthe
background
PDU to the
the
which
transmissions
maximum
RNC.
RLC wasradio The
entity included value
of
AC This
'Poll
to be
number parameter
SDU'
used, of to andsetdefines
transmissions theset trigger the for minimum
polling
the RLC every status
RESET Poll_SDU reporting
PDU that SDU, period
is set ofequalthe AM tovalue RLC
the for the
MaxRST-1.
of
the
in the
bearers
theRNC. Poll_PDU
statuswhenThe the is
parameter
report dataof equal
the is is
timer, to
transferred the
significantthe expected
over
timer only isHS-DSCH.
if status
the
stopped. SDU period
The
discard
After assuming
maximum
the after
expiration the
MaxDAT maximum
of is
the used timer, as
AC PS
'Poll
"In
The
This interactive
window'
sequence
value
parameter ofthe to
the and set
delivery background
theofdata
parameter
defines window
SDUs
the is
minimum radio
based
in UE"value
configured bearers
polling
to define
asof when
suchtrigger,
the whether data
to theprotocol
RLC is transferred
the RLC
RLC entity entity
parameter of the over
of RNC.the HS-
Poll_PDU UE is to
transport
the
a value
retransmissions
newtransmission channel
of
retransmission AM
is user RLC
applied. is poll' timers
triggered rate. Timer_Poll,
based on Timer_poll_periodic,
the last RLC status report received while
DSCH.
'Last
deliver
for
The the AM TheRLC
the
algorithm
value
received entity
isdefines
not
of
PDU the
SDUs ofthe parameter
theto ifto
PS upperset is
thelayers
interactive set
pollingtoinand sequenceAM
trigger
background timers
forregardless
the last
radio Timer_Poll_Prohibit
AMD of RLC
bearers PDU
the value scheduled
when ofthe
datathe
AC Timer_status_periodic,and
This
timer
and
for
RAB the parameter
was first
attribute running.
transmission,
Delivery If applied
noOrder. status Timer_MRW
value
in
itreport
has
accordanceof the not been
and
RLC
is received with
activated
Timer_RST
protocol
theirduring with
parameter
the
activations
the "AM
in accordance
timer, with Poll_SDU
a newthe with
"AM
status
fortheir
RLC the AM
is
RLC transferred
report
activations triggers
entity with
of over
thefor the PSPSHS-DSCH.
"AM NRT
interactiveRLC with The
HS-DSCH"
statusand value
report
background of triggers
the parameter
parameter. radio for The
PS
bearers indicates
NRTPoll_PDU with
when how trigger
HS-DSCH"
data oftenis isthe
AC retransmission
status
'Last
This report
retransmission
parameter is
triggers triggered
defines PDUfor PS
the based
poll' NRT
value to on
with
set
ofofthe the
the next
HS-DSCH"
polling
RLC status
protocoltrigger report
parameter. for
parameter thereceived
The
last value
AMD after
Poll_window is
PDU the
configured forthe the
sender
configured
parameter.
transferred pollsto The the
over conform receiver
values
HS-DSCH. toof in
the
the accordance
Thevalue
timers value are theofwith "AM
configured
the the RLC
parameter activation
period
asused such oftothe
Poll_PDU
indicates the poll
inRLC trigger
for
number PS NRT
entity 'polling
ofofis RLC with
expiration
as such
scheduled
AM RLC to of
the
for
entity the RLC
the timer.
ofPDU'. entity A
retransmission,
the PS retransmission
ofvaluethe
interactive RNC. and and The filter value
background timer is is signalled
radio in the
to
bearers the RLC RLC
when entity entity
data of the
of the
every
HS-DSCH"
RNC.
SDUs Poll_PDU
The
how parameter
value of the The
instead,
Timer_status_periodic of
depending the parameter
on its
is is
activation
signalled expressed to status.
the in
RLC relation
entity to
of the
the size
UE
RNC
UE
'Missing
transferredonly
rounded PDUifoften
itup
over has to the
indicator' thesender
been
HS-DSCH. activated
closest
to set polls
The value
thevalue the
with orreceiver
receiver the
down
of the "AM
theto AMR to inRLC
detect the
parameter accordancestatus
maximum
the missingreport
indicates with
value AMD the
triggers
how activation
allowed
PDUs.
often forin PS
the the ofNRT the
of
pollthe
rounded allocated
trigger up to
'polling the transmission
closest
every value
Poll_SDU window or down
SDU'. for toThe the maximum
value RLC is entity.
value
configured It is
allowedtransformed
as such in the
to the into
RRC RLC
with
RRC
sender HS-DSCH"
signalling.
polls the receiver parameter. inof accordance with the activation ofthe theclosest poll trigger 'window
the corresponding
signalling.
entity ofpolling'.
the RNC. number
The trigger the AMD PDUs
is applied if itsuch has roundingbeen up to
activated with the RNC. integer
"AM RLC and it
based
is configured to The
the value
AM RLC is configured
entity. Poll_PDU as can to the
be RLC
set to entity
a bigger of the value with The other
status
trigger report isTheapplied triggers for PS NRT with HS-DSCH" parameter.
means. valueif is it hasconfigured been activated
as such with to thethe RLC "AM RLCofstatus
entity the RNC. reportThe triggers trigger foris
PS
appliedNRTifwith it has HS-DSCH"been activated parameter. with the "AM RLC status report triggers for PS NRT
with HS-DSCH" parameter.
AC This parameter enables to activate and deactivate the polling and status reporting
AC triggers
This parameter and the defines RLC timers the SDU for the AM RLC
discard timeentity whenofthe thetimer-based
PS interactive SDU or discard is
background
applied RAB
for the AMR that RLC is using
entities HS-DSCHof the in its
PS streaming data transfer
radio direction.
bearer and The followingis
HS-DSCH
AC This
triggersparameter
and timers definesand the
period minimum
definition number methods for the are AM RLC
controlled status
with reports
the that will
parameter:
used
be in transferring
received for the thestreaming
PS data. The radio valuebearers of the parameterin the durationis defined of the inRLC relation to the
AC "Timer
The
value poll
parameter
of the RABperiodic" defines to
attribute set the
theTransfer
AMD PDU timer for
delay. the timer-based
retransmission
The value polling,
offiltering
the AMperiod RLC in relation to the
timer
transmission
"Timer
RLC roundstatus tripwindow
periodic"
time for whento
the set data
PS the istimer
streamingtransferred
for thethe value
radio over
timer-based
bearers HS-DSCH. when status The
data parameter
reporting,
is transferred is over
used
AC Timer_Discard
This
when parameter
the expected is achieved
defines RLC the by
statusvalue multiplying
of the
reporting RLCperiod protocol
is of the
parameter
produced Transfer
with delay
MaxDAT
the with
algorithm for the the AM
using
"Timer
HS-DSCH.
value poll"
of theof to
The setRLC
parameter. the timer
timer The for
isvalue
useda sentin the
of poll,
filtering out
Timer_discard extra retransmissions
isisconfigured ofsuch
asover theHS- AMD
to the
AC RLC
the
"Timer
This entity
transmission
poll
parameter the
prohibit" PS
window streaming
to set size,
thethe AMradio
timer RLC
of for bearers
RTT,
filtering when
maximum
out data
polls status transferred
in the is report
sender, period, and the
PDUs.
RLC
DSCH.
value
The
entity The
ofstatus
this
timer
of thedefines
value
parameter
isofstarted
RNC, the in
however,
as
value
parameter
inputs.
the sender
the the RLC
maximum
defines forthe aprotocol
particular
allowed
maximum
parameter
received
value
number
MaxMRW
status
10000 report
ms.
ofintransmissions
for
Thethatthe AM
valuefor
"Timer
RLC entity
indicates
of the a of prohibit"
the
missing
Timer_discard PS AMD isisto
streaming set
PDU.
signalled the timer
radio
While
to the for
bearers
the filtering
timer when
is out
running, status
data is reports
transferred
all status the
reportsover receiver,
HS-
received
AC This
the
If the parameter
AMD PDU,
expected defines
which
status the
set
reporting value
equal of
to
period theisRLCRLC
MaxDAT-1.
smallerentity
protocolthanofThethe
the UE
parameter
value rounded
maximum of MaxRST
the up tofor
parameter
status thetheisAM RL
reporting
"Poll
DSCH.
by PDU" The
the sender,
closest value to set
value
orexcept the
downof the trigger
to parameter
ACK the polling
SUFIs,
maximum every
defines
are Poll_PDU
discarded;
value the maximum
allowed NACKsPDU,
inPS the number
inRRC the status of transmissions
signalling. reports do not for
configured
period defined as such
with totrigger
thethe the RLC entity ofstatus
the RNC.
AC This
"Poll
the parameter
SDU"
move
trigger to set
MRW
retransmission defines
command, of"AM
theany RLC
maximum
polling
whichof the status
every
isAMD set period
equalPoll_SDU
PDUs tomaxthe for
reporting
indicated SDU,period
MaxMRW-1. streaming
missing. for the TheWhenAM with RLC
value anHS-DSCH"
ofofthe
ACK theis
parameter,
PS
"Poll streaming
window"
parameter
received the
foris the toPoll_PDU
radio set bearer
configured
last the
missing poll
window
as in
such
AMDtrigger
relation
based
toPDU theistousedthe RLC
polling
RLC
which for the
round
trigger,
entity
was of RLC
the
included entity
trip
RNC.time
inofthe ofwhen
The the RNC.
data
parameter Theisof
is value
AC This parameter defines the minimum status reporting period thestatus
AM RLC report for thethe
of the
transferred
"Last
significant
timer, Poll_PDU
transmissionwith
only
the timerradio if is
the
the set
PDU
is stopped. SDU equal
HS-DSCH. poll" to
discard
After to the
The
set
the expected
maximum
the
after polling
MaxDAT
expiration status
value
trigger period
is used
for
retransmissions
of the timer, theassuming
as
last theAMD
is value
a new retransmission thePDU
applied. maximum
of the timers
AC PS
This streaming
parameter defines bearers when
the minimum data valueis transferred RLCover
of theTimer_status_periodic, HS-DSCH.
protocol parameter The value Poll_PDU ofis
transport
AM RLC
scheduled
triggered channel
timers
for the
based on user
Timer_Poll,
first
the data
transmission,
lastAM rate. report
status received while the timer was running. Timer_MRW, If no
the
for parameter
the AM RLC defines is set
entity to the
ofthe the PS RLC
streamingtimers Timer_Poll_Prohibit
radio bearers when and
data isRLC transferred
AC The
and
"Last
This
status algorithm
report isisreceived
Timer_RST
retransmission
parameter notaccordance
in applied
PDU poll"if itwith
value has
to set
of not
their
thethe been
RLCactivations
polling activated
trigger
protocol with with
forthe
parameter thethe
"AM "AM
last RLCAMD
Poll_SDU status
PDUstatus
for report
the AM
over HS-DSCH. The valueinduring
accordance
of the
the timer,
parameter with atheir
new
indicates
retransmission
activations how with
often
is
thethe
triggered
"AM
sender RLC based
status
polls
on
the
report
triggers
scheduled
RLC
the triggers
entity
next for PS
for
of
status for
thereport PS
streaming
the streaming
retransmission,
PS streaming
received with with
HS-DSCH"
radio
after HS-DSCH"
bearers
the parameter.
expiration when parameter.
of The
data
the is The
values
transferred
timer. A Poll_PDU
of the timers
over
retransmission trigger
HS- are is
filter
AC report
This
receiver triggers
parameter
in for
accordance PS
defines NRT the with
value HS-DSCH"
ofreceiver
the RLC parameter.
protocol The
parameter value is configured
Poll_window as
for the AM
configured
"Missing
DSCH. is The PDU tovalue
as conform
such
indicator" tothe
ofRLC towith
the the
to RLC
setthe
parameter value activation
entity
the of thethe
of
indicates ofto
"AM the
RNC. RLC poll
indetect itThe
trigger
period
the values
missing'polling
Poll_PDU
of SDUs
the
AMD every
for
timers PS
PDUs, Poll_PDU
arestreaming
timer to
such
PDU'. The
used
the RLC
value
in the
entity
of the of entity
the
parameter
of
RNC. the
is The RNC value
expressed
only isnumber
ifsignalled
in
has
relation
of
been RLC
to
to
activated
the
the RLC
size
how
with
entity
of the
often
the
of "AM
the
allocated
the
UE
AC with
This HS-DSCH"
signalled
"Retransmission
RLC parameter
sender status to report
polls the
the parameter
RLCfilter
enables
receiver entity
triggersin DL instead,
of
toinvalue the
PSorUE
transfer"
activate
foraccordance NRT depending
and rounded
to set the
deactivate
with
with the up
HS-DSCH" on
RLC its
tothe
activationactivation
the
entity closest
pollingof
ofthe
parameter. and
the status.
value
RNC status
poll or down
to in
triggerfilter
reporting to
out
'polling the
rounded
transmission up to the
window closest down to the maximum value allowed the RRC
AC
maximum
extra
triggers
every
signalling.
This Poll_SDU
parameter
value
retransmissions
and the SDU'.for
allowed
RLC
defines
ofThe
timers the
in the
the AMR
AMD
for
value
therounding
maximum
RRC
the RLC
PDUs,
is AM entity.
signalling.
RLC entity
configured
status
It as
is transformed
reporting of the
such toPS
period
into the
thestreaming
RLC
of the entity
AM
corresponding
RAB
RLCof the that is
RNC.
in relatio
number
"Expected
using
The trigger of
HS-DSCH the
status AMD
is applied PDUs
reporting
in its ifdata it has period"
transfer to up to
activate
direction. with
been activated the closest
the
The the RNC integer
following to
"AM RLC produceand
triggers it
status is
the
and configured
expected
timers
report and
triggersto
AC the
This
status
period
for PSAM RLCwith
parameter
reporting
definition
NRT entity.defines
periodPoll_PDU
methods
HS-DSCH" ontheare
the firstcan
basis beofset
transport
controlled
parameter. the to
with a the
channel bigger
defined user value
number
parameter: data with
ofrate other
status for the means.
reports,definition The of
which
value
the
will
"Timerbe isreceived
relative configured
poll transmission
periodic" in as
the to such window
duration
set the to theof
timer RLC
size
the of entity
the
transmission
for the AM of the
RLC.
timer-based RNC.
window, The trigger is applied if it
polling,
AC This parameter assigns the relative transmission window size of the AM RLC to the
has
"SDU
"Timer beendiscard
statusactivatedafter MaxDAT
periodic" withtothe set "AM RLC
transmissions"
therate.timerThe status
for the toreport
define
timer-based triggers
statically for whether
status PSreporting,
NRT the withSDU HS-
AC first
The transport
parameter channel
defines user
the data
second transport window
channel size useris defined
data rateas for thethe numberdefinition of o
DSCH"
discard parameter.
afterto MaxDAT retransmissions or theNo_discard after MaxDATwindow transmissions
"Timer
AMD PDUs. poll" Thissetparameter
the timer for a sentalso
defines poll, relative transmission size for will all
AC be
This used,
"Timer
non-zero poll
parameterand prohibit"
transport assigns to set
channel thethe timer
relative
user data for filtering
transmission
rates which outwindowpolls
are lowerinsize
the than sender,
of the
dataAM rate RLC number to the1.
"In sequence
"Timer
second status
transport delivery
prohibit"channel of
to SDUs
set thedata intimer
UE" to
fordefine
filtering whether
out status theisreports
RLC entityinas theof the
receiver,UE will
AC This
deliver parameter
the received defines SDUs theuser
to third
upper transportrate.
layers
The
channel
in
window
sequence user sizedata
regardless
defined
rate forof the
the
the number
definition
value of theof
"Poll
of AMD PDU" PDUs. to set the trigger polling every Poll_PDU PDU,
AC the relative
RAB parameter
This attribute transmission
Delivery
assigns window
Order.
the relative size of the
transmission AM RLC.
window
"Poll SDU" to set the trigger polling every Poll_SDU SDU,size of the AM RLC to the
"Poll_SUFI"
third toto allow polling based on status PDU instead of data PDU
AC This parameter defines the fourth transport channel userisdata
"Poll transport
window" channel
set the user
window data rate.
based The
polling window trigger, size defined rateas forthe thenumber
definition of of
"Use
AMD
"Last special
PDUs.
transmission value PDU of HEpoll" field"totoset switch,
the on or trigger
polling off, thefor use the oflastspecialAMD value
PDU of HE
AC the
This relative transmission window size of the AM RLC.
field. parameter
scheduled for the assigns the
first transmission, relative transmission window size of the AM RLC to the
AC fourth
"Last transport
retransmission channel PDU user
This parameter defines the fifth transport channel user poll" datato rate.
set the The window
polling trigger size foris the
data defined
rate lastforAMD as
thethe PDU numberofof
definition
AMD
scheduled
the PDUs.
relative for the
transmission retransmission, window size of the AM RLC.
AC This
"MissingparameterPDU indicator" assigns the to set relative
the receivertransmission to detect window the missingsize of AMD the AM PDUs,RLC to the
AC fifth
This transport
"Retransmission
parameter defines channel filter in theuser data
DL sixthtransfer" rate.
transport The
to setchannelwindow
the RLCuser size
entity is defined
dataof the rateRNC as the
for the number
to filter
definition outofof
AMD
extra
the PDUs.
retransmissions of the AMD PDUs,
AC Thisrelative
parameter transmission
assigns the window relative size of the AM RLC.
transmission window size of the AM RLC to the
"Expected status reporting period" to activate the RNC to produce the expected
AC sixth
This transport
parameter channel user data rate. The window sizeuser is defined as for thethe number of
status reporting defines period on thethe seventh
basis of transport
the defined channel number data
of status rate reports, definition
which
AMD
of the PDUs.
relative transmission
AC will
This be received
parameter in the duration
assigns the window of thesize
relative of the AMwindow
transmission
transmission RLC.
windowsize andof the AM RLC to the
"In sequence
seventh transport delivery channel of SDUs in UE" to define whether the isRLC entityasofthe thenumberUE will
AC This parameter
deliver the received defines SDUs theuser
toeighth
data rate. The
uppertransportlayers inchannel
window
sequence user sizedata
regardless
defined
rateof forthe thevaluedefinitionof the
of
of AMD
the PDUs.
relative transmission window size of the AM RLC.
AC RAB attribute Delivery Order.
This parameter assigns the relative transmission window size of the AM RLC to the
"Poll_SUFI"
eighth transport to allow channel polling user based on status PDU instead ofdefined
data PDU
AC This
"Use parameter
special value definesof HEthe AMdata
field" RLC
to
rate.
switch,Round TheTrip
on
window
or Time
off,
size
(RTT) is
use offor
thetransmission the data
special
as the
HE transfer
number
field with
value.
of
AMD
the PDUs.
DCH when the This parameter
reverse also
transport defines channelTripthe relative
is a DCH(RTT) and both DCHs window size for all
AC This
of theparameter
non-zero defines
transport the AM RLC
channel user Rounddata ratesTime which are higher for the datahave
than transfer
data
theirwith
rate
TTI
values
the equal to 10 ms.
AC ThisDCH
number 8.when the
parameter definesreverse the transport
AM RLC Round channelTrip is aTime DCH(RTT) and the for maximum
the data transfer of theirwith TTI
values
the equals to 20 ms.
AC ThisDCH parameterwhen the definesreverse the transport
AM RLC Round channelTrip is aTime DCH(RTT) and the for maximum
the data transfer of theirwith TTI
values
the equals to 40 ms.
AC ThisDCH parameterwhen the definesreverse the transport
AM RLC Round channelTrip is theTime HS-DSCH.
(RTT) for the data transfer with
AC This parameter defines the AM RLC Round Trip Time (RTT) for the UL data transfer
AC when the radio bearer
This parameter definesisthemapped
AM RLC to the
RoundE-DCH
Trip and the(RTT)
Times reverse for transport
the UL data channel is
transfer
the
with HS-DSCH.
RACH when It is used to
the reverse estimate
channel the average
is FACH response
and for(RTT)
the DLtime from
data the moment
transfer with
AC This
that parameter
the AM RLC defines the AM
entity sends anRLCAMD Round
PDUisTripitsTime
toRACH.peer entity for
withthethedownlink
poll bit data
FACH
transfer when
over the reverse
HS-DSCH transport
when the channel
radio bearer is It
mapped is used
to theto estimate
DCH in theset to the
UL.
AC receiving
average moment
This parameter
response of
definesthe corresponding
the AM
time from theRLCmoment status
Round PDU.
Trip
that theTime The
AM RLC RTT
(RTT)entity depends
for the on
downlink
sends the
an AMD L1/L2
data PDU
processing
transfer
to its with
peer delay
HS-DSCH
entity of
withthe
the UE
when and
poll the
bit the
set RNC,
radio
to the processing
bearer is
receiving delay
mapped
moment to of
the
ofthe BTS,
E-DCH
the the
in Uu
UL.
corresponding
AC This parameter
interface delay, defines the
Iub AM RLC delay.
Round Trip parameter
Time (RTT)isfor thetoUL/DL SRB AM data tran
status PDU. Theand RTT thedependstransfer
on the L1/L2The processing delay used
of the define
UE andthethe
AC RLC
This status
RNC,parameter reporting
processing defines and
delay of polling
thethe
AMBTS, period
RLCthe lengths.
Round Trip Timedelay,
Uu interface (RTT)and for the
the Iub
datatransfer
transferdelay.
when the radio beare
AC The parameter is used to define the AM RLC status reporting and
defines the maximum status reporting period of the AM RLC in relation t polling period
This parameter is not taken into account when Satellite Iub is disabled for the BTS.
lengths.
AC The parameter defines the AMRLC Round Trip Time (RTT) for the data transfer for SRB3
When value is changed it is taken into account only for new connections.
AC This parameter defines the AM RLC Round Trip Times (RTT) for the UL SRB data
AC transfer
This parameter with E-DCH defines when thethe value reverseof thechannel RLC protocol is HS-DSCH, parameter andMaxDAT
for the DL forSRBthe AM
data
RLC transfer
entity of with
the HS-DSCH
SRB on HSPA when when the reverse
signaling transport
is transferred channel over is E-DCH.
E-DCH orIt HS-
is used
AC The
to parameter
estimate the defines
average the maximum
response time status
from reporting
the moment periodwhen of the
the AMAM RLC RLC entity in
DSCH.
relation The
toAMD the valueRLC ofround
the parameter
trip time defines
for the SRB the on maximumHSPA number
when the of transmissions
signalling is theofSRB for
AC sends
The
the AMD an
parameter PDU PDU
defines
that is tosetits
the peer
equalminimum entity
to the with
status
MaxDAT-1. the pollThe
reporting bit set
period
value to the receiving
of the
of the AM RLC
parameter momentforis
transferred
the corresponding over E-DCH status orPDU.
HS-DSCH. The RTT The maximum
depends on the value is used as the value ofof
AC configured
This AM RLCas
parameter such
timers defines to the theRLC
Timer_Poll, value entity
of the of the RLC
Timer_poll_periodic, RNC protocol and is L1/L2
itparameter
signaled
processing
to the RLC
Poll_PDU
delay
for
and entity
the AM
the
of UE
theentityand
UE rounded the RNC, up to processing
the closest delay value of the
or BTS,
downthe the
to "AM
the Uu interface
maximum delay,
value and
allowed the in
AC RLC
Timer_RST
Iub
This transfer
parameter ofin the
delay. SRB
accordance on
The parameter
defines HSPA,
to their
the value of when
activation
is the
used the
RLC signalling
with
to define
protocol is transferred
theparameter RLC
AM RLC status status over
Poll_SDU E-DCH
report
reporting or
triggers
for the and AM
the
HS-DSCH.
for RRC
SRB on signaling.
The
HSPA" value of
parameter. the parameter
The values definesof thehow timers often arethe sender
configured polls
as the or
such to HS-
the
polling
RLC period
entity of lengths.
the SRB on HSPA when the signaling is transferred over E-DCH
AC This
receiver
RLC parameter
entity thedefines
in accordance
ofvalue RNC. the value
with
The the
values ofofthe
activation theRLC of the
timers protocolpoll
are parameter
trigger
signalled "polling Poll_window
to the every
RLCthe Poll_PDU
entity forofthe
the
DSCH.
AM RLC The entity of of the
the SRB parameter
on HSPA indicates
when the how often
signalling the
is sender
transferred polls over receiver
E-DCH or
AC PDU".
UE
This
in The
rounded
parameter
accordance value
up to of the
activates
with the parameter
closest
and
theofactivation value is
deactivates orexpressed
down
of the indicates the to
poll trigger in
the
polling relation
maximum
and
"polling to
status
everythe
valuesize of
allowed
reporting
Poll_SDU the in
triggers
SDU".the and
HS-DSCH.
transmission
RRCRLC
the signalling. The
timers window value
for the AM the
allocated parameter
for the AMR RLC how
entity. often
It is the sender
transformed polls
into the
the
AC The
This
receiver value in is
parameter configured
accordance defines as RLC
the
with such entity
to theofRLC
transmission
the activation
the
and SRB
entity
receiving
offollowing
the
on
poll
HSPA
of trigger
the RNC.
window thatThe is using
sizes value E-DCH
of the is AM
signaled or
RLC
corresponding
HS-DSCH
to the RLC in its
entity number
data
of the of
transfer
UE the AMD
direction.
rounded PDUs
up The
to rounding
the closest uptriggers
to
value the"window
closest
or and
down
based
integer
timers
to the and polling".
andperiod
maximum it is
AC entities
The
configured
This value for is
parameter the
to thesignalling
configuredAM
defines RLC asradio
the such
entity. bearer
to
The
transmission the RB2.
RLC
value and The
entity
is valueof
configured
receiving the iswindow
expressed
RNC.
as The
such to
sizes inthe
valuethe
of RLC
the number
is signalled
AM entity
RLC ofof
definition
value
AMD allowed
PDUs. methods in the areRRC controlled
signaling. with Thethetrigger
parameter: is applied if itallowed
has been activated with
to
the the
entities
"Timer RNC. RLCfor
poll Theentity
the value of
signalling
periodic" the
is UE
to signalled
setradiorounded
the to the
bearer
timer up
forRB3.to
RLC
the the
The closest
entity value
timer-based of the value
is UE roundedinup
expressed
polling, in the
the RRC
tonumber
the closest of
AC the
This "AM
signalling. RLC
parameter Thestatus defines
trigger report the
isto triggers
transmission
applied itfor
iftimer has SRB and
been on HSPA"
receiving
activated parameter.
window
with thesizes
"AM of
RLC the AM RLC
status
value
AMD
"Timer orstatus
PDUs. down to the maximum
periodic" set the value allowed
for the in the RRC
timer-based signalling.
status The
reporting, trigger is
AC entities
report
This for the for
triggers
parameter signalling
SRB
defines on radio
the HSPA".
bit bearer RB4. The for value is expressed in thesize number of
applied
"Timer
AMD
if it has
poll"
PDUs. to set been theactivated
timer for rate
awith
sent threshold
thepoll,"AM RLC the
statususage of RLC
report PDU
triggers for SRB 656onbits
AC in
HSPA"
"Timer
This DLparameter
data
poll transfer
parameter.
prohibit" definesiftothe set RB
the the istimer
minimummapped to HS-DSCH
fornumber
filtering ofout theinpolls
allocated theHS-PDSCH
DL.
in theThe maximum
sender, codes that bit rate
allows
of
"Timer status prohibit" to set the timer for filtering out the status reports in the size
the NRT RB has to be equal to or higher than the threshold before the PDU
AC This
656 parameter
bits can be defines selected. theThe HS-DSCH
special value signal'off' to interference
means that ratio the RLCthreshold
PDU size for the 656
receiver,
AC use
bits
This of
is RLC
not in PDU
use. size 656 bits in DL data transfer if the RB is mapped to the HS-
"Poll parameter
PDU" to setdetermines the triggerthe SDUevery
polling discard mode for
Poll_PDU PDU, a radio bearer of the RT PS
DSCH
HSDPA
RAB in15
employingthe DL.the
Codes HS-DSCH
feature
RLC AM SIR
(HSDPA
transfermust cell be
mode.upg equalfromto5ortoSDU, higher
10 codes thanorthe threshold
HSDPA cellbefore
upg
AC "Poll
This SDU"
parameter to set the
defines trigger
the SDU polling every
discard in Poll_SDU
timer value for theRLC UMPDU RLC entity of the UE
RLC
from
The
"PollSDU
PDU
10 to
window"
size
15
discard 656
codes
to set
bits
method can
license) be is selected.
required
to be used is polling
the window-based
The orderspecial
chosentrigger, from the following alternatives: SIR
to value
utilise "off" means size that656 the bits for w
threshold
-HS-DSCH.
Timer-based, is not in
withPDUuse.
explicit signalling ('Timer_based')
"Last transmission poll" to set the polling trigger for the last AMD PDU
-scheduled
SDU The HSDPA
discard after 15MaxDAT
Codes feature number ("HSDPA
of cell upg from
transmissions 5 to 10 codes" or "HSDPA
('MaxDAT_based')
Telecom RNC defines for the
RLC first transmission,
parameters for new radio link based on to the used service of the UE during RRC state
cell
-"Lastupg
No discard from 10 to
after MaxDAT 15 codes" license)
number of theis required
transmissions in order
('No_discard') use RLC PDU size 656
retransmission PDU poll" to set polling trigger for the last AMD PDU
Telecom for the
This HS-DSCH.
parameter is retransmission,
the identifier for and the RNRLC object.
scheduled
This parameter for the is related to RNFC-FastPCHSwitchEnabled
If CPICH EcNo or Ptx_average measurement report is which is the feature
not available, HS-DSCH optionality parameter
"Missing PDU indicator" to set the receiver to detect the missing AMD PDUs.
SIR condition is not evaluated.
O&M The parameter defines the origin of the last configuration action affecting the object
1...3, step 0.1 1.3 1.3

1...3, step 0.1 1.8 1.8
1...60, step 1 15 15
1...32, step 1 12 12
1...32, step 1 12 12
100...600 %, step 1 % 200% 200%
10...1000 ms, step 10 ms 40 ms 40 ms
1...100 %, step 1 % 23% 23%
1...64, step 1 1 1
50...99 %, step 1 % 70% 70%
Bit 0: Timer poll periodic (Always 0), Bit 5940 5940
0...1500 ms, step 10 ms 500 ms 500 ms
0...1500 ms, step 10 ms 500 ms 500 ms
1...60, step 1 15 15
1...32, step 1 12 12
1...32, step 1 12 12
100...600 %, step 1 % 200 % 200 %
10...1000 ms, step 10 ms 40 ms 40 ms
1...100 %, step 1 % 23 % 23 %
1...64, step 1 1 1
50...99 %, step 1 % 70 % 70 %
0...1500 ms, step 10 ms 500 ms 500 ms
100...200 kByte, step 5 kByte 125 Kbytes 125 Kbytes
200...1800 kByte, step 5 kByte 1500 kByte 1500 kByte
200...1500 kByte, step 5 kByte 625 Kbyte 625 Kbyte
200600 Kbytes, step 5 Kbytes 350 Kbyte 350 Kbyte
1...3, step 0.1 1 1
1...600 %, step 1 % 80% 80%
1...60, step 1 15 15
1...32, step 1 12 12
1...32, step 1 12 12
1...600 %, step 1 % 140% 140%
10...1000 ms, step 10 ms 40 ms 40 ms
1...100 %, step 1 % 23% 23%
1...64, step 1 1 1
50...99 %, step 1 % 70% 70%
1...60, step 1 40 40
1...600 %, step 1 % 100% 100%
10...1000 ms, step 10 ms 40 ms 40 ms
1...100 %, step 1 % 23% 23%
1...64, step 1 1 1
50...99 %, step 1 % 70% 70%
1...60, step 1 30 30
1...600 %, step 1 % 112% 112%
10...1000 ms, step 10 ms 40 ms 40 ms
1...100 %, step 1 % 23% 23%
1...64, step 1 1 1
50...99 %, step 1 % 70% 70%
1...3, step 0.1 1 1
0.1...10, step 0.1 2 2
1...600 %, step 1 % 80% 80%
1...60, step 1 15 15
1...32, step 1 12 12
1...32, step 1 12 12
1...600 %, step 1 % 140% 140%
10...1000 ms, step 10 ms 40 ms 40 ms
1...100 %, step 1 % 23% 23%
1...64, step 1 1 1
50...99 %, step 1 % 70% 70%
0...200 ms, step 10 ms 100 ms 100 ms
1...3, step 0.1 1 1
1...40, step 1 15 15
1...32, step 1 12 12
1...32, step 1 12 12
1...600 %, step 1 % 133% 133%
10...1000 ms, step 10 ms 40 ms 40 ms
1...100 %, step 1 % 23% 23%
1...64, step 1 1 1
50...99 %, step 1 % 70% 70%
1...3, step 0.1 1 1
0.1...10, step 0.1 2 2
1...40, step 1 15 15
1...32, step 1 12 12
1...32, step 1 12 12
1...600 %, step 1 % 200% 200%
10...1000 ms, step 10 ms 40 ms 40 ms
1...100 %, step 1 % 23% 23%
1...64, step 1 1 1
50...99 %, step 1 % 70% 70%
1...60, step 1 15 15
1...32, step 1 12 12
1...32, step 1 12 12
1...600 %, step 1 % 200% 200%
10...1000 ms, step 10 ms 40 ms 40 ms
1...100 %, step 1 % 23% 23%
1...64, step 1 1 1
50...99 %, step 1 % 70% 70%
1...60, step 1 30 30
1...600 %, step 1 % 200% 200%
10...1000 ms, step 10 ms 40 ms 40 ms
1...100 %, step 1 % 23% 23%
1...64, step 1 1 1
50...99 %, step 1 % 70% 70%
1...3, step 0.1 1 1
1...600 %, step 1 % 66% 66%
1...60, step 1 15 15
1...32, step 1 12 12
1...32, step 1 12 12
1...600 %, step 1 % 133% 133%
10...1000 ms, step 10 ms 40 ms 40 ms
1...100 %, step 1 % 23% 23%
1...64, step 1 1 1
50...99 %, step 1 % 70% 70%
0.1...10, step 0.1 2 2
1...3, step 0.1 1 1
1...600 %, step 1 % 66% 66%
1...60, step 1 15 15
1...32, step 1 12 12
1...32, step 1 12 12
1...600 %, step 1 % 200% 200%
10...1000 ms, step 10 ms 40 ms 40 ms
1...100 %, step 1 % 23% 23%
1...64, step 1 1 1
50...99 %, step 1 % 70% 70%
100...600 %, step 1 % 200 % 200 %
8...85000, step 8 16 16
8...85000, step 8 96 96
8...85000, step 8 96 96
8...85000, step 8 768 768
8...85000, step 8 1600 1600
8...85000, step 8 3000 3000
8...85000, step 8 4096 4096
8...85000, step 8 6000 6000
0...1500 ms, step 10 ms 100 ms 100 ms
0...1500 ms, step 10 ms 120 ms 120 ms
0...1500 ms, step 10 ms 160 ms 160 ms
0...1500 ms, step 10 ms 140 ms 140 ms
0...1500, step 10 100 ms 100 ms
0...1500 ms, step 10 ms 100 ms 100 ms
0...1500 ms, step 10 ms 500 ms 500 ms
0...1500 ms, step 10 ms 100 ms 100 ms
0...1500 ms, step 10 ms 100 ms 100 ms
0...1500 ms, step 10 ms 500 ms 500 ms
0...1500 ms, step 10 ms 700 ms 700 ms
1...600 %, step 1 % 112 % 112 %
0...1500 ms, step 10 ms 100 ms 100 ms
0...1500 ms, step 10 ms 100 ms 100 ms
1...60, step 1 30 30
1...600 %, step 1 % 116% 116%
10...1000 ms, step 10 ms 40 ms 40 ms
1...100 %, step 1 % 23% 23%
1...64, step 1 1 1
50...99 %, step 1 % 70% 70%
Bit 0: Timer poll periodic (Always 0), Bit 1988 (111 1100 0100) 1988 (111 1100 0100)
1: Timer status periodic (Always 0),
16 (0), 32 (1), 64 (2), 128 (3), 256 (4), 51Bit 2: 64 (2) 64 (2)
Timer poll (Always 1), Bit 3: Timer poll
16 (0), 32
prohibit (1), 640),
(Always (2),Bit128 (3), 256
4: Timer (4), 51
status 64 (2) 64 (2)
prohibit (Always 0), Bit 5: Poll PDU
16 (0), 32 (1), 64 (2), 128 (3), 256 (4), 51 32 (1) 32 (1)
(Always 0), Bit 6: Poll SDU (Always 1),
0...14080
Bit 7: Poll kbps,
window step 128 kbps,
(Always RLC
1), Bit PDU si
8: Last 3584 kbps 3584 kbps
transmission
5...15, step 1 PDU poll (Always 1), Bit 9: 10 10
Last retransmission PDU poll (Always 1),
-5...30 dB, step 0.1 dB, SIR threshold is 9 dB 9 dB
Bit 10: Missing PDU indicator (Always 1),
Timer based explicit (0), Max DAT retransmMax DAT retransmissions (1) Max DAT retransmissions (1)
10...100 ms, step 10 ms 100 ms 100 ms
Legacy way (0), Optimized RLC reconfigur

Optimized RLC reconfiguration Optimized
(1) RLC reconfiguration (1)
RNC2600
1.3
1.8
15
12
12
200%
40 ms
23%
1
70%
5940
500 ms
500 ms
15
12
12
200 %
40 ms
23 %
1
70 %
500 ms
5940
125 Kbytes
1150 Kbytes
1250 Kbytes
175 Kbytes
1500 kByte
1800 kByte
1000 Kbyte
250 Kbytes
2300 kByte
2550 kByte
300 kByte
350 Kbyte
70 Kbytes
475 Kbyte
600 Kbyte
1
80%
15
12
24
300%
40 ms
23%
1
70%
56849
40
100%
40 ms
23%
1
70%
1988
30
112%
40 ms
23%
1
70%
1988
1
2
80%
15
12
24
300%
40 ms
23%
1
70%
32273
100 ms
1
15
12
24
300%
40 ms
23%
1
70%
3857
1
2
15
12
12
200%
40 ms
23%
1
70%
3601
15
12
12
200%
40 ms
23%
1
70%
6100
30
200%
40 ms
23%
1
70%
1988
1
66%
15
12
24
300%
40 ms
23%
1
70%
122385
2
1
66%
15
12
12
200%
40 ms
23%
1
70%
65041
200 %
8 kbps
16
32 kbps
96
64 kbps
96
384 kbps
768
1376 kbps
1600
1600 kbps
3000
3840 kbps
4096
9600 kbps
6000
100 ms
120 ms
160 ms
140 ms
100 ms
150 ms
500 ms
150 ms
150 ms
500 ms
700 ms
112 %
100 ms
100 ms
30
116%
40 ms
23%
1
70%
1988 (111 1100 0100)
64 (2)
64 (2)
32 (1)
3584 kbps
10
13 dB
Max DAT retransmissions (1)
100 ms
Optimized RLC reconfiguration (1)

Not applicable
Not applicable
Comments
assume defaults are ok unless advised otherwise


Changed to 24 in line with TN113 July 2009

Changed to 300% in line with TN113 July 2009
Workbook aligned with network setting Feb 2010. NOT MODIFIABLE
Workbook aligned with network setting Feb 2010. NOT MODIFIABLE
Changed to 24 in line with TN113 July 2009

Changed to 300% in line with TN113 July 2009
Changed from 12 to 24 in line with TN113 July 2009

Changed from 12 to 24 in line with TN113 July 2010
RAN1201 F-DPCH
RAN1201 F-DPCH
RAN1201 F-DPCH
RAN1201 F-DPCH
RAN1201 F-DPCH
RAN1201 F-DPCH
RAN1201 F-DPCH
RAN1201 F-DPCH


38010
38011
38078
38027
38029
38105
38094
38070
38071
38072
38073
38074
38197
38198
38199
38201
38213
38214
38150
38063
38064
38065
38067
38068
38172
38223
38224
38225
38226
38147
38373
38026
38232
38233
38234
38235
38236
38148
38179
38215
38363
38365
38013
38014
38082
38174
38175
38176
38177
38178
38253
12420
12421
12453
12454
12455
12456
12457
12458
12494
12495
12496
38268
38269
38270
38271
38272
38012
38160
38249
38250
38252
38273
38274
38015
38110
38111
38112
38128
38186
38312
38313
38314
38315
38316
38317
38047
38180
38043
12497
12498
12519
12520
12521
12522
12523
12524
12525
12564
12541
12542
38044
38045
38046
38060
38061
38062
38129
38130
38131
38132
38133
38338
38339
38340
38341
38342
38344
38345
38346
38347

38352
38030
38032
38033
38034
Monthly
Monthly
Monthly
Monthly
Monthly New in RU20

Monthly
Monthly New in RU20

Monthly New in RU20
Monthly
Monthly New in RU20
Monthly New in RU20
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly New in RU20
Weekly
Monthly
Monthly
Monthly
Monthly New in RU20
Monthly New in RU20
Monthly New in RU20
Monthly New in RU20
Monthly New in RU20
Monthly New in RU20
Monthly New in RU20
Monthly New in RU20
Monthly
Monthly
Monthly
Monthly
Monthly
Monthly
New in RU20 on TOP
New in RU30
New in RU30
New in RU30
New in RU30
New in RU30
New in RU30
New in RU30
New in RU30
New in RU30
New in RU30
New in RU30
New in RU40
New in RU40
New in RU40
New in RU40
New in RU40
New in RU40
New in RU40
New in RU40
New in RU40
New in RU40
New in RU30
New in RU30
New In RU50 EP1

New In RU50 EP1
New In RU50 EP1

New In RU50 EP1
New in RU40
New in RU40
New in RU40
New in RU40
New in RU40
New in RU40
New in RU40
New in RU30
New in RU30
4.5
4.5
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
9.0
9.0
8.4
9.0
9.0
5.9
5.9
4.0
4.0
4.8
4.0
4.0
4.8
8.0
4.0
4.0
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.0
4.0
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
8.0
8.0
8.0
8.0
8.0
8.0
RNTRM Parameters
Abbreviated Name
A2EA
ActivityFactorForAMRDCHTrafficBearers - Af122AMRDL
ActivityFactorForAMRDCHTrafficBearers - Af122AMRUL
ActivityFactorForAMRDCHTrafficBearers - Af59AMRDL
ActivityFactorForAMRDCHTrafficBearers - Af59AMRUL
ActivityFactorForCSDCHTrafficBearers - Af144CSStreDL
ActivityFactorForCSDCHTrafficBearers - Af144CSStreUL
ActivityFactorForCSDCHTrafficBearers - Af576CSStreDL
ActivityFactorForCSDCHTrafficBearers - Af576CSStreUL
ActivityFactorForCSDCHTrafficBearers - Af64CSConDL
ActivityFactorForCSDCHTrafficBearers - Af64CSConUL
ActivityFactorForDCCHTrafficBearers - Af128And136DCCHDL
ActivityFactorForDCCHTrafficBearers - Af128And136DCCHUL
ActivityFactorForFACHRACHTrafficBearers - AfFACHCCDL
ActivityFactorForFACHRACHTrafficBearers - AfFACHCIDL
ActivityFactorForFACHRACHTrafficBearers - AfFACHContUL
ActivityFactorForFACHRACHTrafficBearers - AfFACHSDL
ActivityFactorForFACHRACHTrafficBearers - AfFACHUDL
ActivityFactorForFACHRACHTrafficBearers - AfRACH208UL
ActivityFactorForFACHRACHTrafficBearers - AfRACHContDL
ActivityFactorForHSPA - AfPTTDL
ActivityFactorForHSPA - AfPTTUL
ActivityFactorForHSPA - AfRTHSDPA
ActivityFactorForHSPA - AfRTHSUPA
ActivityFactorForHSPA - AfSRBOnHSDPA
ActivityFactorForHSPA - AfSRBOnHSUPA
ActivityFactorForNRTDCHTrafficBearers - Af128NRTDCHDL
ActivityFactorForNRTDCHTrafficBearers - Af128NRTDCHUL
ActivityFactorForPCHTrafficBearers - AfPCHContUL
ActivityFactorForPCHTrafficBearers - AfPCHDL
ActivityFactorForRTPSTrafficBearers - Af128RTPSAMDL
ActivityFactorForRTPSTrafficBearers - Af128RTPSAMUL
ActivityFactorForRTPSTrafficBearers - Af128RTPSUMDL
ActivityFactorForRTPSTrafficBearers - Af128RTPSUMUL
DSCPBTSOMToBTS
DSCPBTSOMToOMS
DSCPForGTPSignalling
HSDPAFlowControlLowThresholdDedicatedVCC
HSDPAFlowControlLowThresholdSharedVCC
HSDPAFlowControlTargetDelayDedicatedVCC
HSDPAFlowControlTargetDelaySharedVCC
NRTDCHFlowControlTargetDelay
RespSyncCounterIP
RespSyncModEnableIP
RespSyncTimerIP
RespSyncTimerSatIP
THP1DelaySensitivitySwitch
ULCACSwitch
UsedSRBALCSet
Telecom Parameters
EchoRequestSending
IPStackErrorTimer
IuDATree
IubDATree
IurDATree
N3Requests
RNTRMId
T3Response
ToAWEOffsetForOverbook
ToAWSOffsetForOverbook
O&M Parameters
RNTRMChangeOrigin
Full Name
Managed Object
AAL type 2 end point address for Iur RNTRM

Activity factor for 12.2 / 12.65 AMR DCH DL bearer RNTRM
Activity factor for 12.2 / 12.65 AMR DCH UL bearer RNTRM
Activity factor for 5.9 AMR DCH DL bearer RNTRM
Activity factor for 5.9 AMR DCH UL bearer RNTRM
Activity factor for 14.4 CS streaming DL bearer RNTRM
Activity factor for 14.4 CS streaming UL bearer RNTRM
Activity factor for 57.6 CS streaming DL bearer RNTRM
Activity factor for 57.6 CS streaming UL bearer RNTRM
Activity factor for 64 CS conversational DL bearer RNTRM
Activity factor for 64 CS conversational UL bearer RNTRM
Activity factor for 12.8/13.6 DCCH DL bearer RNTRM
Activity factor for 12.8/13.6 DCCH UL bearer RNTRM
Activity factor for FACH-C/C DL bearer RNTRM
Activity factor for FACH-C/I DL bearer RNTRM
Activity factor for FACH control UL bearer RNTRM
Activity factor for FACH-S DL bearer RNTRM
Activity factor for FACH-U DL bearer RNTRM
Activity factor for RACH 20.8 UL bearer RNTRM
Activity factor for RACH control DL bearer RNTRM
Activity Factor for PTT RAB in Downlink RNTRM
Activity Factor for PTT RAB in Uplink RNTRM
Activity factor for RT HSDPA bearer RNTRM
Activity factor for RT HSUPA bearer RNTRM
Activity factor for SRB on HSDPA bearer RNTRM
Activity factor for SRB on HSUPA bearer RNTRM
Activity factor for 128 NRT DCH DL bearer RNTRM
Activity factor for 128 NRT DCH UL bearer RNTRM
Activity factor for PCH control UL bearer RNTRM
Activity factor for PCH DL bearer RNTRM
Activity factor for 128 RT PS AM DL bearer RNTRM
Activity factor for 128 RT PS AM UL bearer RNTRM
Activity factor for 128 RT PS UM DL bearer RNTRM
Activity factor for 128 RT PS UM UL bearer RNTRM
DSCP for BTS OM towards BTS RNTRM
DSCP for BTS OM towards OMS RNTRM
DSCP for GTP signalling RNTRM
HSDPA flow control AAL2 low threshold for dedicated VCC RNTRM
HSDPA flow control AAL2 low threshold for shared VCC RNTRM
HSDPA flow control AAL2 target delay for dedicated VCC RNTRM
HSDPA flow control AAL2 target delay for shared VCC RNTRM
NRTDCH Flow Control Target Delay RNTRM
Response synchronization counter for DL synch frame RNTRM
IP Iub DCH Sync Modifiable RNTRM
IP Response synchronization timer for DL synch frame RNTRM
IP Response synchronization timer with Satellite Iub RNTRM
THP 1 Delay Sensitivity Switch RNTRM
Enhanced UL CAC Algorithm Switch RNTRM
Used SRB ALC set RNTRM
Echo Request Sending RNTRM

IP Stack Error timer RNTRM
Iu-CS Digit analysis tree RNTRM
Iub Digit analysis tree RNTRM
Iur Digit analysis tree RNTRM
N3-REQUESTS RNTRM
RNTRM Identifier RNTRM
T3-RESPONSE RNTRM
ToAWE Offset for overbooked NRT DCH AAL2 connection RNTRM
ToAWS Offset for overbooked NRT DCH AAL2 connection RNTRM
Change origin RNTRM

Group Description
Transmission This parameter defines the A2EA address of the RNC. It is used in locating free ATM
Transmission (AAL2 VCC) resources
This parameter defines between
the activity RNCs.
factorThe for following
the AMR AFI 12.2fields
kbps can DCHbeand used for theDL bea
HSDPA
A2EA address of the RNC:
Transmission This
- AFI parameter
49, privatedefines numbering the activity
plan factor for the AMR 12.2 kbps DCH and HSUPA UL bear
Transmission -This
AFI parameter
45, E.164 ATM defines format
the activity factor for the AMR 5.9 kbps DCH and HSDPA DL beare
- AFI 39, DCC ATM format
Transmission This
- AFI parameter
47, ICD ATM defines
format the activity factor for the AMR 5.9 kbps DCH and HSUPA UL beare
Transmission This parameter defines the activity factor for the CS streaming (non-transparent) 14.4
The A2EA
kbps DCH address
DL bearer. must The be given factor in long format including F separators, if applicable.
Transmission This parameter defines theactivity
activity factorvalue for the 1 means
CS streamingthat there is no overbooking
(transparent) 14.4
At the
for this adjacent
bearer RNCforsite
and, (Nokia RNC)
example, the the 0.50
value shortmeans
format that of the theaddress
overbooking is used for for
ratio digit
Transmission kbps
This DCH
parameterUL bearer.
definesthe The activity
theparameter
activity factor
factor value
foristhe 1 means
CS streamingthat there is no overbooking
(non-transparent) 57.6
analysis
the bearer configuration
is 2. When (by MML commands).
value changed, the new value is taken into
for
kbpsthisDCHbearer and, forThe example, the value 0.501means that
thatthe overbooking ratio for
Transmission use
This
the for
bearernewDL
parameteris
bearer.
established
2. definesthe
When
activity
activityfactor
bearers.
the parameter factor
value
value
foristhe means
CS streaming
changed, the
there
new
is no overbooking
(transparent)
value is taken 57.6
intofor
for
The
kbpsthisDCHbearer
length UL and,
of the
bearer. forThe
digit example,
sequence
activity the
will value
be 40
factor value0.50
in the 1 means
system.
means that For
that thethe
there overbooking
number
is no ratio
formats
overbooking
Transmission use
This
the for
bearernew
parameterisestablished
defines
2.and,
When thebearers.
the activity
parameter factor
value for the CS
is changed, conversational
the new value (transparent)
is taken into64
having
for this AFI
bearer39, 47 andforThe49 the
example, additional
the value digits
0.50 are initialised
means that withoverbooking
the F digits when the
ratio for
Transmission kbps
use
digit
This DCH
for
sequence
parameterDL bearer.
newisestablished
is stored
defines activity
bearers.
into
the factor
the system.
activity factor value
foristhe 1 means that
CS conversational there is no overbooking
(transparent) 64
the
for bearer
this bearer 2. When
and, forThe the parameter
example, the value
value changed,
0.501means the
that new
the value
overbooking is taken into
ratio for
Transmission kbps
use
This DCH
for newUL
parameter bearer.
established
defines activity
bearers.
the activity factor
factor value
for the means
12.8/13.6 thatkbps
there DCCHis no DL overbooking
bearer.
the
For
for bearer
the
this is
embedded
bearer 2. When
and,valueE.164 the parameter
format
for example, (AFI
the value
45)
value theis
0.50 changed,
IDI part
means of the
the new
address
that thefor value is taken
contains
overbooking intofor
16
ratio
Transmission The
use
This activity
for
digits. new
The
parameter factor
established
last digit
defines of the1
the means
bearers.
IDI field
activity that
is F there
factorand for isthe
the no overbooking
E.164 address
12.8/13.6 kbps is this bearer
aligned
DCCH UL at theand,
right
bearer. for
the bearerthe
example, is 2. When
value 0.5 the parameter
means that value
the is changed,
overbooking ratiothefornew
the value
bearer isistaken
2. into
When
end
The of the
newIDI
activity fieldvalue
factor before1 the
meansF digit. The intermediate digits between the AFIand, and for
Transmission use
This
you for
parameter
change established
the defines
parameter activitythat
bearers.
the value, the
there
factor
new for isthe
value
no1.6/1.7
overbooking
is taken kbps
into
for thisDL
DCCH
use for22
bearer
any bearer.
new The
E.164
example, address
the are
value filled
0.5 with
means zeroes.
that theThe DSP
overbooking part (that
ratio is,
for the
the last
bearer digits)
is 2. of the
When
Transmission acctivity
established
This factor
parameter value
bearers. 1 means that there is no overbooking for this bearer and, for
digit change
you sequence isdefines
filled withthe value,
activitythe
zeroes factor
by the for the is
system. 1.6/1.7
The kbps
user DCCH
isuse for UL
responsible anyisbearer. The
for filling
example,
activity thethe
factor value
value
parameter
0.5
1 means
means that thenew
thatthere is
value
overbooking
no
taken
overbooking ratio into
for
for the
this bearer
bearer
new
2. When
and, for
Transmission the AFI
established
This and
parameter IDI fields
bearers.
defines of the address
the value,
activitythe correctly.
factor for For
the is example
3.2/3.4 kbps theDCCHE.164 number +44
you change
example, thethevalue parameter
0.5 means thenew
that there value
overbooking taken
ratio into
forfor use
the for DL
bearer anyisbearer.
new
2. When
The
171 250 factor
acctivity 1234 is
valuegiven 1 in an embedded
means that E.164
is no address
overbooking format in
this the following
bearer and, way:
for
Transmission established
This
you parameter
change bearers.
defines the value,
activitythe factor for the is3.2/3.4 kbps use DCCH for UL anyisbearer. The
example,
activity thethe
45000441712501234F.
factor value
value
parameter
0.5
1 means
means that thenew
thatthere is
value
overbooking
no
taken
overbooking ratio into
for
for the
this bearer
bearer
new
2. When
and, for
This
you parameter
change bearers.
defines the value,
activitythe factor for the isFACH-C/C DL bearer and for the HS
example,
This parameter
FACH thethevalue
(signalling)
parameter
0.5 means
is mandatory
bearer. The that
ifactivity thenew
neighbour factor
value
overbooking
RNC(s)
value
taken
ratio
exist
1 meansand
into
forthatuse
the for any
bearer
connections
there is isnonew
2. When
over the Iur
This
you parameter
change bearers.
defines the value,
activitythe factor
newfor the isFACH-C/I DLusebearer. Thenew activity
are taken
overbooking in the
use.
for parameter
this bearer and, for example, value the taken0.5
value intomeans forthatany the
Transmission factor value bearers.
established
This parameter 1 meansdefines that there is no overbooking for this bearer ULand, for example,
overbooking
the value 0.5 ratio
means thethe
for that the
activity
bearer is 2.
overbooking
factor
When foryou
ratio
thechange
FACH
for the
control
the parameter
bearer is 2.
bearer.
When value,Thethe
you
activity
changenew
Transmission factor
value
This value
is taken
parameter 1 means
into use
defines that
for
the there
any newis
activity no overbooking
established
factor for the for
bearers.
FACH-S this bearer
DL bearer. and, for
The example,
activity
the
the parameter
value value, that
0.51means the new
the value is taken
overbooking intofor
ratio use
thefor any new
bearer established
is 2.and When
Transmission factor
bearers.
This value
parameter means
defines that
the there is no
activity overbooking
factor for the for
FACH-U this bearer
DL bearer. , foryou
The
change
example,
activity
the
the parameter
value value,
0.51means the
that new
the value
overbooking is taken into use
ratio for for for
thethis any
bearer new established
is 2.and, When
Transmission factor
bearers.
This value
parameter means
defines that
the there is no
activity overbooking
factor forintothe use
RACH 20.8bearer
kbpsestablished for you
UL bearer
change
example,
and for
the
the parameter
value value,the
0.5 means new
that the value
overbookingis taken ratiofactor for
for thevalue any
bearer new
is 2. When bearers.
you change
Transmission the
This HS RACH
parametervalue,8signalling)
defines bearer. The activity 1 means that there is no
the parameter
overbooking for thethe
this bearer new activity
value
and, for
factor
is taken
example,
for into
the RACH
theusevalueforcontrol
anymeans
0.5 new DLestablished
bearer. The activity
that the
Transmission factor
bearers.
This value
parameter 1 means
defines that
the there is
activity no overbooking
factor foryou thechangefor this
PTT transport bearer bearer for
and, example,Admission Control r
Connection
overbooking
the value 0.5 ratio
means for the
that bearer
the is 2.
overbooking When ratio for the the
bearer parameter
is 2. When value,
you the new
change
Transmission This
value
This parameter
is taken
parameter intois applied
use
defines for
the when
any newPTT
activity RABfor
established
factor is onthe HSPA
bearers.
PTT or R99 DCH
transport bearer transport
Connection channels.
Admission Control r
the parameter value, the new value is taken into use for any new established
Transmission This parameter
bearers. is applied when PTT RAB is on HSPA
This parameter defines the activity factor for the RT PS HSDPA (HS-DSCH) transport bea or R99 DCH transport channels.
Transmission This parameter defines the activity factor for the RT PS HSUPA (E-DCH) transport beare
Transmission This parameter defines the activity factor for the SRB on HSDPA (HS-DSCH)
Transmission transport bearerdefines
This parameter CAC reservation.
the activity The activity
factor for the factor
SRBvalue 1 means
on HSUPA that the
(E-DCH) transport
transport
layer
bearer bit rates are not
CAC reservation. scaled
The for the
activity CAC
factor function.
value The
1 means value 0.50
that means
thekbps
transportthat the
Transmission This parameter
average part of defines
the the
transportactivity
bearer factor
is halfforofthe
the NRT PSvalue.
default AM 128After DCH layer
parameter DL bit
rates
bearer.are notactivity
The scaledfactor
for thevalue
CAC1function.
means Thethere
that valueis0.50 means that the
noatoverbooking for average
this bearer
Transmission modification,
This
part parameter
of the thedefines
newbearer
transport parameter
the activity
is half value
of theisdefault
factor taken
for the into
NRT use
value. PS next
AM
When 128
younew transport
kbps
changeDCHthe ULbearer
and, for example,
establishment.
bearer. The
Thevalue,
activitythe value
existing
factor 0.50
bearersmeans that
logical CACthe overbooking
reservations ratio
are for
not the bearer
modified. is 2.
Transmission parameter
This parameter
When you change the
defines
thenewthevalue
parameter
1ismeans
activity taken
value,
that
into
factorthefornew there
use
the forisany
NRT
value
no new
PS
is
overbooking
AM 16
taken kbps
into use
for this
established
DCH
for DLbearer
bearers.
any new
and, forThe
bearer. example,
activitythe value
factor 0.501means that the overbooking ratio for the bearer is 2.
This
When parameter
you bearers.
changedefines
the thevalue
activity
parameter
means
factorthe
value,
that
fornew there
the NRT is PS
value
no overbooking
is AM 16into
taken kbpsuse
for this
DCH
for ULbearer
any new
and, forThe
bearer. example,
activitythe value
This parameter
When you bearers.
changedefines
the thevalue
activity
parameter
means
factorthe
value,
that
fornew there
the NRT is PS
value
no overbooking
is AM 256
taken kbps
into use
for
DCHthis
for
bearer
DL
any new
and, forThe
bearer. example,
activitythe value
This parameter
When you bearers.
changedefines
the thevalue
activity
parameter
means
factorthe
value,
that
fornew there
the NRT is PS
value
no overbooking
is AM 256
taken kbps
into use
for
DCHthis
for
bearer
UL
any new
and, forThe
bearer. example,
activitythe value
This
When parameter
you bearers.
changedefines
the thevalue
activity
parameter
means
factorthe
value,
that
fornew there
the NRT is PS
value
no overbooking
is AM 32into
taken kbpsuse
for this
DCH
for DLbearer
any new
and, forThe
bearer. example,
activitythe value
factor 0.501means
value meansthat thatthe overbooking
there ratio for the
is no overbooking bearer
for this is 2.
bearer
established
When you bearers.
change the parameter value, the new value is taken into use for any new
and, for example, the value 0.50 means that the overbooking ratio for the bearer is 2.
established
When you changebearers. the parameter value, the new value is taken into use for any new
established bearers.
Transmission This parameter defines the activity factor for the NRT PS AM 32 kbps DCH UL
Transmission bearer. The activity
This parameter factor
defines thevalue 1 means
activity factor that there
for the NRT is PS
no overbooking
AM 384 kbpsfor DCH thisDLbearer
and, for
bearer. example,
The activitythe value
factor 0.50 means that the overbooking ratio for the bearer is 2.
Transmission This
When parameter
you changedefines
the thevalue
parameter
1 means
activityvalue,
that
factorthe
fornewthere
the NRT is PS
value
no overbooking
is AM
taken384 kbps
into use
for
DCH
for
thisUL
any
bearer
new
and, forThe
bearer. example, the
activity value
This
When parameter
you bearers.
changedefines
the thevalue
activity
parameter
means
value,
that
factorthe
fornewthere
NRT PSis AM
value
no overbooking
is 64 kbps
taken intoDCHuse
for
DL
for
this bearer
bearer.
any new
and,
The for example,
activity factor the
valuevalue 0.50 means
1 means that thatisthe
there overbooking
noNRT
overbooking ratio for bearer
forkbps
this the bearerand,isfor2.
This
When parameter
you bearers.
changedefines
the the activityvalue,
parameter factor fornew
the the value PSis AM
taken64 into use DCH
for UL
any new
example,
bearer. theactivity
The value 0.50
factormeans 1 that the overbooking is ratio for the bearer foristhis
2. When
This
you parameter
change bearers.
the defines
parameter thevalue
value,
means
activitythe
factor
new
that
for
value
there
the NRT
is
no overbooking
PS
taken AM use
into 8 kbpsfor DCH
any DL bearer
new bearer.
and,
The for example,
activity factor the
valuevalue
1 0.50 means
means that thatisthe
there no overbooking
overbooking ratio
for for bearer
this the bearerand, isfor
2.
This
When parameter
you bearers.
changedefines
the the activityvalue,
parameter factorthe
fornew
the NRT
value PSis AM
taken8 kbps
into DCH
use for ULanybearer.
new
example,
The thefactor
activity valuevalue
0.50 1means that the overbooking ratio for the bearer is 2. and,
When
This
you parameter
change bearers.
the defines
parameter themeans
activitythat
value, the
there
factor
new forisboth
value
no overbooking
is the 8kbps
taken into andfor24kbps
use
this bearer
for any PCH
new
for U
control
example, the value 0.50 means that the overbooking ratio for the bearer is 2. When
This parameter
you change bearers.
the defines
parameter the value,
activitythe
factor
newfor bothisthe
value 8kbps
taken intoand
use24kbps
for any PCH new DL bearer
Transmission established bearers.
This parameter defines the activity factor for the RT PS AM 128 kbps DCH DL bearer
Transmission for
Thisstreaming.
parameterThe activity
defines thefactor value
activity 1 means
factor for the that
RT PS thereAMis128no overbooking
kbps DCH ULforbearer this
bearer
for and,
streaming. for example,
The activitythe value 0.5 means that the overbooking ratio for the
Transmission This
bearerparameter
is 2. Whendefines thefactor
you change
value
activity 1 means
factor
the parameter for the that
RT PS
value,
thereUM is no overbooking
new128
theoverbooking kbps
value DCH DL
isratio
taken
forbearer
into
this
use
bearer
for and,
factor 0.5
value means
1 means that
thatthe
there is no overbooking for the
forbearer
this
Transmission Thisany
bearer new
parameter
is established
2. Whendefines bearers.
the
you change activity factor
the parameter for the RT PS
value, UM
new128
theoverbooking kbps
value DCH UL
isratio
taken into use
bearer
for and, for example, the value 0.5 means that the for the
Transmission Thisstreaming.
any
bearer new
parameter
is
The
2. When
activity
established
defines thefactor
bearers. value
activity
the parameter
1 means
factor
value is for the that
changed, RT thethere
PS AMis16
new
nokbps
value
overbooking
DCH
isratio
taken DL for
into
this
bearer
use
bearer and,
factor 0.5
value means
1 means that
thatthe overbooking
there is nokbps
overbooking for the
for this
Transmission for
Thisany
bearer new
parameter
is established
the
value, AM
new16
theoverbooking DCH
value isratiotaken UL bearer
into use
bearer
any
bearer new
parameter
is
The
2. When
activity
established
defines
you change
factor
bearers.
the value
activity 1 means
factor
RT PS
value,
thereUM is nokbps
new16
theoverbooking
overbooking
DCH
value isratiotaken DL for this
bearer
into use
bearer
any
bearer new
parameter
is
The
2. When
activity
established
defines
you change
factor
bearers.
the value
activity 1 means
factor
RT PS
value,
thereUM is nokbps
new16
theoverbooking
overbooking
DCH
value isratiotaken UL for this
bearer
into use
bearer and,
factor 0.5
value means
1 means that
thatthe
there is no overbooking for the
forbearer
this
Transmission for
Thisany
bearer new
parameter
is established
the
value, AM
new256
theoverbooking kbps
value DCH DL
isratio
taken into use
bearer
any
bearer new
parameter
is
The
2. When
activity
established
defines
you change
factor
bearers.
the value
activity 1 means
factor
RT PS
value,
thereUM is no overbooking
new256
theoverbooking kbps
value DCH DL
isratio
taken
forbearer
into
this
use
bearer
any
bearer new
parameter
is
The
2. When
activity
established
defines
you change
factor
bearers.
the value
activity 1 means
factor
RT PS
value,
thereAM is nokbps
new32
theoverbooking
overbooking
DCH
bearer
into use
bearer and,
factor 0.5
value means
1 means that
thatthe
there is nokbps
overbooking for the
for this
Transmission for
Thisany
bearer new
parameter
is established
the
value, AM
new32
theoverbooking DCH
value isratiotaken UL bearer
into use
bearer
any
bearer new
parameter
is
The
2. When
activity
established
defines
you change
factor
bearers.
the value
activity 1 means
factor
RT PS
value,
thereUM is nokbps
new32
theoverbooking
overbooking
DCH
bearer
into use
bearer
any
bearer new
parameter
is
The
2. When
activity
established
defines
you change
factor
bearers.
the value
activity 1 means
factor
RT PS
value,
thereUM is nokbps
new32
theoverbooking
overbooking
DCH
value isratiotaken UL for this
bearer
into use
bearer and,
factor 0.5
value means
1 means that
thatthe
there is nokbps
overbooking for the
for this
Transmission for
Thisany
bearer new
parameter
is established
the
value, AM
new64
theoverbooking DCH
value isratiotaken DL bearer
into use
bearer
any
bearer new
parameter
is
The
2. When
activity
established
defines
you change
factor
bearers.
the value
activity 1 means
factor
the parameter for the that there
T PSthe
value, AM new
is no
64 kbpsoverbooking
value DCH
isratio UL into
taken
for thisfor
beareruse
bearer and,
streaming. for
The example,
activity the
factor value
value 0.5
1 means
means that
that the
there overbooking
is no overbooking for
for the
this
Transmission for any
bearer new
This parameter
is established
the activity
you change factor for the
the parameter RT PS
value, UM
new64
theoverbooking kbpsisDCH
value taken DL bearer
bearer and,
streaming. forThe
example,
activitythe value
factor 0.5 1
value means
means that
thatthe
there is no ratio
overbooking for into
the
for
use
this
Transmission for
Thisany
bearer new
parameter
is established
the activity
the parameter RT PS
value, UM
new64
theoverbooking kbpsisDCH
value taken UL bearer
into use
bearer
for and, for example, the value 0.5 means that the ratio for the
any
bearer new
parameter
is
The
2. When
activity
established
defines
you change
factor
bearers.
the value
activity 1 means
factor
RT PS
value,
thereAM is no
new8value
theoverbooking
overbooking
kbps DCH
isratio DL into
taken
for thisfor
bearer
use
bearer and,
streaming. for
The example,
activity the
factor value
value 0.5
1 means
means that
that the
there is no overbooking for
for the
this
bearer new
This parameter
is established
the activity
the parameter RT PS
value, AM
new8value
theoverbookingkbps DCH
isratio UL into
taken bearer
usefor
bearer and,
The activity the value
factor value 0.5
1 meansthat
means thatthere
the is no overbooking for
for the
this
Transmission for
Thisany
bearer new
parameter
is established
the activity
the parameter RT PS
value, the UMnew8 value
kbps DCH is DL into
taken beareruse
bearer
for and,
streaming. forThe
example,
activitythe value
factor 0.5 1
value means
means that
thatthe overbooking
there is no ratio
overbooking for thefor this
Transmission any
bearer new
This parameter
is established
the activity
the parameter RT PS
value, the UMnew8 value
kbps DCH is UL into
taken beareruse
bearer
for and,
streaming. forThe
example,
activitythe value
factor 0.5 1
value means
means that
thatthe overbooking
there is no ratio
overbooking for thefor this
Transmission any
bearer new
This parameter established
specifies bearers.
the Differentiated Services the Code Point (DSCP) for BTSuse O&M
bearer is 2. When
and, you change
for example, the parameter
the value 0.5 meansvalue, new
that the overbooking value isratio
taken
for into
the
bearer new
This parameter established
is 2. Whenspecifies bearers.
the Differentiated
you change the parameter Services Code
value, the new Point (DSCP)
value is taken forinto
BTSuse O&
Transmission for any new established bearers.
This parameter specifies the Differentiated Services Code Point (DSCP) for GTP signalling traffic. The
Transmission The low threshold is an AAL2 buffer occupancy threshold in a dedicated VCC, which
The configured DSCP
triggers value
rate"isbuffer
applied also for GTP ECHO REQUEST messages.
to The GTP ECHO fun
Transmission The low sending
thresholdthe
is "full
an AAL2 (maximumoccupancyallowed rate) flow
threshold in control
a shared messages
VCC, which
HSDPA
triggers data sending
sending entities
the "full rate" when it is passed
(maximum allowed downward
rate) flow(when
controlthe buffer is getting
messages
Transmission The parameter
emptier). defines the maximum allowed delay caused by AAL2 queueingtoin a
HSDPA
dedicated data sending entities when it is passed downward (that is, when the buffer is
VCC.
Transmission The parameter
getting emptier).defines the maximum allowed delay caused by AAL2 queueing in a
This parameter
shared VCC. applies only if the VCC is being terminated in A2SU hardware. In
Transmission This
case parameter
the VCC isdefines
applies
being the target
only delay
if the VCC
terminated in NPS1 isinbeing
NRT DCH VCC
terminated
hardware, which
in A2SU
this parameterthehardware.
flow control
is not In tries
relevant.
This
to
case parameter
keep
thefor NRT
VCC isapplies
traffic
being only if the
caused
terminated by VCC
AAL2
in NPS1is being
queuing terminated
when
hardware, in A2SUishardware.
overbooking
this parameter used.
is not In
relevant.
Transmission Defines
This
case thethe
parameter
VCCnumber how
isapplies
being often
only DL VCC
if the
terminated synchronization
in NPS1 is being frame
thiscan
terminated
hardware, in be resent
A2SU
parameter upon
hardware.
is not one
In transp
relevant.
Transmission case the VCC is being terminated
enablesonly
This parameter applies in
the modification NPS1
if the VCC isof hardware,
IP Iub
being this parameter
Synchronization.
terminated is not
in A2SU hardware. In relevant.
Transmission case the VCC is being terminated in NPS1 hardware,
If no response from BTS has been received to DL synchronization control this parameter is notframe
relevant.
within time interval de
Transmission Overall IP transport synchronization period is defined by RespSyncTimerIP and
If no response from BTS has been received to DL synchronization control frame within time interval de RespSyncCounterIP p
Overall IP transport synchronization period is defined by RespSyncTimerSatIP and RespSyncCounterI
Transmission Defines whether the THP1 interactive class type of traffic is treated in a delay or non-
Transmission delay
Defines sensitive
whetherway. the Delay
THP2 sensitivity
interactive/class non-delay
type of sensitivity affects the
traffic is treated in aVCCdelayselection
or non-
and
delay overbooking.
sensitive way.If three
Delay VCC configurations
sensitivity / non-delayare selected,
sensitivity the delay
affects the sensitive
VCC traffic
selection
Transmission Defines
goes to whether
the RT VCCthe THP3and interactive class
overbooking is not type of traffic
performed foristhis
treated
RAB. inIfatraffic
delayisorsetnon-
as
and
delay overbooking.
sensitive way.If three
Delay VCC configurations
sensitivity / non-delayare sensitivity
selected, the delay
affects the sensitive
VCC traffic
selection
Transmission non-delay
This
goes sensitive,
parameter
to the RT VCC defines the RAB
the is
mode
and overbooking directed
of the to
UL the
CAC NRT VCC
algorithm
is not performed andin
for this overbooking
the
RAB.BTS. When is
Ifsensitive applied
the
traffic is traffic
set as
and
for
valueaoverbooking.
specific RAB.
0 (Normal) If selected,
is three VCC the configurations
UL CAC istheare
not selected,
able to take the
thedelay
delta reservation into
Transmission non-delay
Defines
goes the
to the sensitive,
used
RT VCCand the RAB
ALC-parameter
anddowngrade is
overbookingdirected
set for to NRT
signalling
is not performed VCC
radio and
bearer
for this overbooking
on Iub
RAB. IfALC and is
Iur.
traffic applied
There
is set as
account
for a in
specificupgrade
RAB.
are severalsensitive,
sets of SRBs (DCCHs) situations,
from which but
the uses the received parameters
non-delay
as such that the RAB is directed to the NRToperator
VCC likely.
and can choose. Only
overbooking one set
is applied
is chosen
for andlead
a specific it istoused
RAB.
connection
for bothmodification
the Iub and the failure
Iur.more
The activity factor for SRBs is
Telecom This parameter
different in thesecontrols
sets varyingRNC echo request
from 7.5% sending. If it is enabled, echo requests are
to 100%.
The value 2 (Extended) is used when all BTSs are running RAS06 software or later.
Telecom This parameter defines for how long the erroneous IU-PS interface IP layer is
SRB set: before the erroneous GTP tunnels related to the path are released and the
tolerated
Telecom The selected
This parameter value is applied
specifies for all
the Digit BTSs/AXCs
Analysis Tree in configured
which theunder the RNC.for the Iu
digit analyses
IUPS IP Routing Error alarm is raised.
Telecom SET1:
Tells
If the in which
value is Digit
0, theAnalysis
timer is Tree
not usedthe digit
and analyses
the IUPS for the Iub interface
IP Routing Error alarm areiscreated.
not
Telecom raised.
This This parameter
parameter specifies is the
not Digit
valid Analysis
for GTPUTree units.
in which the digit analyses for the Iu
DL direction: DCCH 12.8/13.6kbps, 10msTTI, Activity factor = 100%
Telecom -This
MAX CPS SDUspecifies
parameter rate = 19 968
the bps
maximum number of attempts for sending the Echo Reques
- AVE CPS SDU rate = 19 200 bps
Telecom This parameter is the identifier for the RNTRM object.
Telecom -This
MAX CPS SDUspecifies
parameter rate = 5the
248maximum
bps waiting time for the Echo Request message. Th
Telecom This parameter defines the offset value to be added to the corresponding
ToAWE_NRT_DCH_ttiXX parameter value whenever the overbooking mode is used
Telecom This
- MAXparameter
CPS SDUdefines
rate = the offset
2 752 bpsvalue to be added to the corresponding
for NRT DCH in the IUB interface.
ToAWS_NRT_DCH_ttiXX
- AVE CPS SDU rate = 2 432 parameter
bps value whenever the overbooking mode is used
for NRT DCH in the Iub interface.
O&M Thedirection:
UL parameter defines
DCCH the origin of the
12.8/13.6kbps, last configuration
10msTTI, action
Activity factor affecting the object.
= 100%
- MAX CPS SDU rate = 21 376 bps
UL direction: DCCH 3.2/3.4kbps, 40msTTI, Activity factor = 100%
SET2:

- AVE CPS SDU rate = 768 bps

- AVE CPS SDU rate = 832 bps
SET3:
DL direction: DCCH 12.8/13.6kbps, 10msTTI, Activity factor = 7.5%


0.6...1, step 0.01 0.6 0.6
0.6...1, step 0.01 0.6 0.6
0.6...1, step 0.01 0.6 0.6
0.6...1, step 0.01 0.6 0.6
0...1, step 0.01 1 1
0...1, step 0.01 1 1
0...1, step 0.01 1 1
0...1, step 0.01 1 1
0...1, step 0.01 1 1
0...1, step 0.01 1 1
0...1, step 0.01 0.08 0.08
0...1, step 0.01 0.08 0.08
0...1, step 0.01 0.6 0.6
0...1, step 0.01 0.6 0.6
0...1, step 0.01 0.3 0.3
0...1, step 0.01 0.3 0.3
0...1, step 0.01 0.1 0.1
0...1, step 0.01 0.1 0.1
0...1, step 0.01 0.1 0.1
0...1, step 0.01 0.1 0.1
0...1, step 0.01 0.1 0.1
0...1, step 0.01 0.1 0.1
0...1, step 0.01 0.1 0.1
0.4...1, step 0.01 0.6 0.6
0.4...1, step 0.01 0.6 0.6
0...1, step 0.01 1 1
0...1, step 0.01 1 1
0...1, step 0.01 0.01 0.01
0...1, step 0.01 0.01 0.01
0...1, step 0.01 1 1
0...1, step 0.01 1 1
0...1, step 0.01 1 1
0...1, step 0.01 1 1
0...1, step 0.01 1 1
0...1, step 0.01 1 1
0...1, step 0.01 1 1
0...1, step 0.01 1 1
0...1, step 0.01 1 1
0...1, step 0.01 1 1
0...1, step 0.01 1 1
0...1, step 0.01 1 1
0...1, step 0.01 1 1
0...1, step 0.01 1 1
0...1, step 0.01 0.1 0.1
0...1, step 0.01 0.1 0.1
0...1, step 0.01 1 1
0...1, step 0.01 1 1
0...1, step 0.01 1 1
0...1, step 0.01 1 1
0...1, step 0.01 1 1
0...1, step 0.01 1 1
0...1, step 0.01 1 1
0...1, step 0.01 1 1
0...1, step 0.01 1 1
0...1, step 0.01 1 1
0...1, step 0.01 1 1
0...1, step 0.01 1 1
0...1, step 0.01 1 1
0...1, step 0.01 1 1
0...1, step 0.01 1 1
0...1, step 0.01 1 1
0...1, step 0.01 1 1
0...1, step 0.01 1 1
0...1, step 0.01 1 1
0...1, step 0.01 1 1
0...1, step 0.01 1 1
0...1, step 0.01 1 1
0...63, step 1. DSCP 10 corresponds to A 10 10
0...5000 ms, step 1 ms 35 ms 35 ms
0...5000 ms, step 1 ms 35 ms 35 ms
0...5000 ms, step 1 ms 205 ms 205 ms
0...5000 ms, step 1 ms 205 ms 205 ms
1...300 ms, step 1 ms 100 ms 100 ms
0...30, step 1 15 15
FP synchronization extension disabled
FP(0)
synchronization extension disabled
FP synchronization
(0) extension disabled (0)
50...500 ms, step 10 ms 300 ms 300 ms
50...2000 ms, step 10 ms 1000 ms 1000 ms
Non delay sensitive (0), Delay sensitive (1 Non delay sensitive (0) Non delay sensitive (0)
Normal UL CAC algorithm is on (0), Exten 2 (Extended UL CAC is on) 2 (Extended UL CAC is on)
1...3, step 1 3 3

1...1800 s, step 1 s, No GTP tunnel releas 30 s 30 s
1...1023, step 1 3 3
1...1023, step 1 1 1
1...1023, step 1 2 2
1...15 times, step 1 times 5 times 5 times
1...60 s, step 1 s 10 s 10 s
0...50 ms, step 1 ms 10 ms 10 ms
0...200 ms, step 1 ms 100 ms 100 ms
RNC2600
Not applicable
0.6
0.6
0.6
0.6
1
1
1
1
1
1
0.08
0.08
0.6
0.6
0.3
0.3
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.6
0.6
1
1
0.01
0.01
0.4
0.4
0.4
0.4
0.4
0.4
0.4
0.4
0.4
0.4
0.4
0.4
1
1
0.1
0.1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
24
35 ms
35 ms
205 ms
205 ms
100 ms
15
FP synchronization extension disabled (0)
300 ms
1000 ms
Non delay sensitive (0)
2 (Extended UL CAC is on)
3
Enabled (1)
30 s
3
1
2
2 times
Not applicable
6s
10 ms
100 ms
Not applicable
Comments
RAN1201 F-DPCH and Transport Bearer Tuning

RAN1201 F-DPCH and Transport Bearer Tuning
Changed from 1 to 0.4 following Transport Bearer Tunug Trial March 2010
Value set to 2(UL Extended CAC) in December 2010
AP 4 Check Value
AP 5 Check Value
AP 5 Check Value
AP 6 Check Value

38104
38048
38049
38050
38052
38053
38054
38075
38076
38077
38079
38095
38096
38097
38098
38099
38101
38102
38103
38115
38116
38117
38118
12389
12390
38120
38121
38122
38123
38124
38125
38126
38127
38139
38323
38324
38325
38326
38327
38329
38330
38332
38333
38359
38360
38361
38069
38080
38081
38151
38152
38153
38154
38155
38156
38157
38158
38159
38171
38228
38229
38230
38231

38090
38091
38092


38254
38255


Weekly New in RU20
Weekly New in RU20
Weekly
Weekly
Weekly
Weekly
Weekly
Weekly
Weekly
Weekly
Weekly
Weekly
Weekly
Weekly
Daily
Daily
Daily
Daily
Daily
Daily
Daily

Weekly

New in RU40
New in RU40
New in RU40
New in RU40
New in RU40
New in RU40
New in RU40
New in RU40
New in RU40
New in RU30
New in RU30
8.0
8.0
4.5
4.5
4.9
4.9
4.9
4.9
4.9
4.9
4.9
4.9
4.9
4.9
4.9
4.9
8.0
8.0
8.0
8.0
8.0
8.0
8.0
5.5
5.9
4.5
4.5
4.5
5.9
5.9
VBTS Parameters

NodeBRABReconfigSupport NodeB PS RAB reconfiguration Support
ControllerIdPair - IHSPAadapterId I-HSPA Adapter Identifier
ControllerIdPair - ServingRNCId Serving RNC Identifier
DediMeasRepPeriodCSdata Dedicated Measurement Reporting Period CS data
DediMeasRepPeriodPSdata Dedicated Measurement Reporting Period PS data
DedicatedMeasReportPeriod Dedicated Measurement Reporting Period
HARQRVConfiguration HARQ RV Configuration
MeasFiltCoeff Measurement filter coefficient
VBTSId VBTS Identifier
O&M Parameters
VBTSChangeOrigin Change Origin
VBTS AC
VBTS HC
VBTS HC
VBTS HC
VBTS HC
VBTS HC
VBTS HC
VBTS HC
VBTS Idenitification
VBTS O&M
Description
This parameter enables/disables the use of PS RAB Reconfiguration feature.
Identifier of I-HSPA Adapter that supports IBTS Sharing.

Identifier of the RNC to which the IHSPA Adapter supporting IBTS Sharing has an Iur
Connection.
This parameter determines the reporting interval that the Node B should use when
sending dedicated
This parameter measurement
determines reports interval
the reporting to the RNC.
that Node B should use when sending
dedicated measurement reports to the RNC.
This parameter determines the reporting interval that Node B should use (by default,
when initialised)defines
This parameter for sending dedicated
the HARQ measurement
method reports
that is to be to the
used in the virtual
RNC. BTS.
Possible choicesindicates
This parameter are ChasehowCombining
measurementand Incremental
values should Redundancy Combining.
be filtered before the The
HARQ method that is defined to be used in the HSPA serving cell defines
measurement event evaluation and the reporting of dedicated measurement results the HARQin
method
a Node B.for the RRC connection in question.
This parameter is the identifier for VBTS Object.
A high value of this parameter emphasises an old filtered measurement result (for
example, with value 9, the weight of an old filtered measurement is 96% and the weight
This parameter
of a new defines is
measurement the5%).
origin of the last configuration action affecting the VBTS obje
A low value of this parameter emphasises a new measurement result (for example, with
value 1, the weight of a new measurement result is 71%).
With value 0, old measurements are not considered.
The default value is 5, which means that the weight of an old filtered measurement is
82% and the weight of a new measurement is 18%. With the default value, the impact
of a single deviating measurement result is not meaningful but the adaptation to more
permanent changes happens fast enough.
PS RAB Reconfiguration is not supported (0), PS RAB PS RAB Reconfiguration is not

Reconfiguration is supported (1) supported (0)
1...4095, step 1, Not Defined (65535) Not Applicable

1...4095, step 1, Not Defined (65535) Not Applicable
0.5...5 s, step 0.5 s 1.5 s
0.5...5 s, step 0.5 s 0.5 s
0.5...5 s, step 0.5 s 2.5 s
Chase Combining (0), Incremental Redundancy Incremental Redundancy Combining
Combining
0 (0), 1 (1), (1)
2 (2), 3 (3), 4 (4), 5 (5), 6 (6), 7 (7), 8 (8), 9 5(1)
(5)
(9), 11 (10), 13 (11), 15 (12), 17 (13), 19 (14)
Not defined (0), Network originated configuration action Not Applicable

Nokia Value O2 UK Value
PS RAB Reconfiguration is not PS RAB Reconfiguration is not supported (0)

supported (0)
Not Applicable Ericsson RNC ID

Not Applicable Ericsson RNC ID
1.5 s 1.5 s
0.5 s 0.5 s
2.5 s 2.5 s
Incremental Redundancy Combining Incremental Redundancy Combining (1)
5(1)
(5) 5
Not Applicable 1



Classification Parameter Type
IPD PTY ID
New in RU20
New in RU20
New in RU20
New in RU20
New in RU20
RU20 on TOP
New in RU20
New in RU20
New in RU20
Issue in Which
New in RU50
New in RU30 New in RU40 Parameter Added
EP1
or Last Changed
New in RU30 7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
VCEL Parameters
Abbreviated Name

CSAMRModeSET
CSAMRModeSETWB
EbNoSetIdentifier
HSDPAenabled
MaxBitRateDLPSNRT
MaxBitRateULPSNRT
RxDivIndicator
WACSetIdentifier
DirectSCCEnabled
FastActOfTargetServCell
FastCompletionOfSCC
HHoMaxAllowedBitrateDL
HHoMaxAllowedBitrateUL
HSDPAFmcgIdentifier
HSDPAFmciIdentifier
HSDPAFmcsIdentifier
HSDPAHopsIdentifier
HSPASCCSpecificATO
HSPAFmcsIdentifier
NrtFmcgIdentifier
NrtFmciIdentifier
NrtFmcsIdentifier
NrtHopgIdentifier
NrtHopiIdentifier
NrtHopsIdentifier
RTWithHSDPAFmcgIdentifier
RTWithHSPAFmcsIdentifier
RTwithHSDPAFmciIdentifier
RTwithHSDPAFmcsIdentifier
RTwithHSDPAHopsIdentifier
RtFmcgIdentifier
RtFmciIdentifier
RtFmcsIdentifier
RtHopgIdentifier
RtHopiIdentifier
RtHopsIdentifier
SRBDCHFmcsId
SRBHopsIdentifier
Power Control
PtxOffsetHSSCCH
O&M Parameters
VCELChangeOrigin
EDCHMinimumSetETFCI
HSDPAMaxBitrateUL
HSPwrOffsetUpdateDelay
HSUPAEnabled
InitialBitRateDL
InitialBitRateUL
MinAllowedBitRateDL
MinAllowedBitRateUL
MaxTotalUplinkSymbolRate
PowerOffsetUpdMsgSize
Telecom Parameters
LAC
RAC
RelocComm_in_InterRNC_HHO
VCELId
Configured CS AMR mode sets VCEL AC

Configured CS WAMR mode sets VCEL AC
Eb/No parameter set identifier VCEL AC
HSDPA enabled VCEL AC
Maximum downlink bit rate for PS domain NRT data VCEL AC
Maximum uplink bit rate for PS domain NRT data VCEL AC
Rx Diversity Indicator VCEL AC
WAC Parameter Set Identifier VCEL AC
Direct SCC Enabled VCEL HC

Faster Activation Of Target Serving Cell VCEL HC
Faster Completion of SCC Procedure VCEL HC
Maximum allowed DL user bit rate in HHO VCEL HC
Maximum allowed UL user bit rate in HHO VCEL HC
HSDPA FMCG identifier VCEL HC
HSDPA FMCI identifier VCEL HC
HSDPA FMCS identifier VCEL HC
HSDPA HOPS identifier VCEL HC
HSPA SCC Specific ATO Value VCEL HC
HSPA FMCS identifier VCEL HC
NRT FMCG Identifier VCEL HC
NRT FMCI Identifier VCEL HC
NRT FMCS Identifier VCEL HC
NRT HOPG Identifier VCEL HC
NRT HOPI Identifier VCEL HC
NRT HOPS Identifier VCEL HC
HSDPA FMCG identifier for AMR multi-service VCEL HC
HSPA FMCS identifier for AMR multi-service VCEL HC
HSDPA FMCI identifier for AMR multi-service VCEL HC
HSDPA FMCS identifier for AMR multi-service VCEL HC
HSDPA HOPS identifier for AMR multi-service VCEL HC
RT FMCG Identifier VCEL HC
RT FMCI Identifier VCEL HC
RT FMCS Identifier VCEL HC
RT HOPG Identifier VCEL HC
RT HOPI Identifier VCEL HC
RT HOPS Identifier VCEL HC
FMCS identifier for standalone SRB on DCH VCEL HC
SRB HOPS Identifier VCEL HC
The power offset of the HS-SCCH VCEL PC
Change origin VCEL O&M
E-DCH minimum set E-TFCI VCEL PS

Maximum bit rate for HSDPA UL DCH return channel VCEL PS
HS-DPCCH power offset update delay VCEL PS
HSUPA enabled VCEL PS
Initial bit rate in downlink VCEL PS
Initial bit rate in uplink VCEL PS
Minimum allowed bit rate in downlink VCEL PS
Minimum allowed bit rate in uplink VCEL PS
Maximum total uplink symbol rate VCEL PS
Power Offset Update Message Size Optimisation VCEL PS
Location area code VCEL Telecom

Routing Area Code VCEL Telecom
Usage of Relocation Commit procedure in inter RNC HHO VCEL Telecom
VCEL Identifier VCEL Telecom
Description
The parameter defines the AMR codec sets which can be used in establishing the CS AMR call over Iur. The parameter is
If the value of the parameter prohibits the establishment of the AMR call, RNC can still establish it if the AMR codec set wh
Note that the value of Bit3 indicating the use of AMR codec mode set (12.2, 7.4, 5.9, 4.75) can be modified only if the RAN
This parameter defines the AMR WB mode sets which are used in UTRAN for the CS AMR WB call. The serving RNC
allocates
This parameterthe largest set ofthe
identifies theWRAB
configured
objectAMR WB
of the mode sets, whichquality
connection-based are the permitted
control subsets
parameter setofassociated
the AMR WB withmode set
the virtua
received
cell. from the
The object enables MSC server
contains/ parametersin the resource
which request message. The configured AMR WB mode set is a permitted subset
The
its parameter
modes are producing disables
the the useWB
lowesttransport
AMR ofdefine
HSDPA theinservice
mode data the
rates
bearer
cell.
ofInthe
andtosignaling
order
resourceactivate bearer
HSDPA
request
specific
in the
or, if the
qualitycell,
virtual
previous
targets andfor
kind licence
relat
of set doesthe n
power
HSDPA control
is thresholds
required in RNC. for each
Activation of the channel
HSDPA configuration.
in the virtual cell does not consume capacity of the HSDPA licences in
exist, it is the subset that has the AMR WB mode of the highest data rate. Version
This parameter defines the maximum downlink user bit rate allowed in a cell for an NRT PS domain RAB. 1 only of the Iu UP support mode for
the RNC. SDU sizes is applicable in the latter case. Equal maximum permitted configured AMR WB mode sets are used
predefined
This
the ULparameter defines directions.
and DL transfer the maximum uplink user bit rate allowed in a cell for an NRT PS domain RAB.
This parameter defines whether one, two or four antennas are used in the receiving direction in the cell. The RNC selects
The
Eb/No parameter is applied in SRNC to when the resource request is for RAB assignment request and in the target RNC of the
Pointersetto theparameters
WAC object according
identifier. this parameter.
Defines the WAC parameter set to be used in this Virtual cell.
SRNS relocation hard handover. The parameter is also significant, if the resource request is received in DRNC from Iur.
This parameter determines if a serving HS-DSCH cell change procedure can be started during anchoring immediately afte
This parameter indicates whether the Faster Activation of Target Serving Cell functionality is enabled in the cell during anc
A new enabled
When measurement
in the report is required
cell,whether
this to trigger
functionality the serving
introduces faster HS-DSCHofcell
activation change
target during
serving anchoring
cell if the value of this par
This parameter indicates the Faster Completion of SCC Procedure functionality is by applying
enabled HSPA
in the cell SCC
duringspecific
anch
The
When formula to calculate
enabled in the
the cell, absolute CFN with this new ATO value is the following:
This parameter
Absolute CFN =defines thethis
bit functionality
rate threshold
AT - HSPASCCSpecificATO
introduces faster completion
that the maximum allocatedofuser
SCCbitprocedure
rate on thebydownlink
includingDPCH
the Delay
mayRestrictio
not exce
where
The AT =
This Faster the
defines of
Completion time,
theSCC which
bit rate RNC
threshold
Procedure has produced
thatapplied
is not internally
the maximum for a
if eitherallocated synchronised
the valueuser radio
bit parameter
of this link
rate in the is handling
uplink DPCH or
"Disabled" procedure.
may
thenot Abou
exceed,
value of th
The
The parameter identifies
Faster Activation the measurement
of Target Serving Cellcontrol parameter
is not applied set (FMCG
if either object)
the value controlling
of this parameter the
is inter-system
"Disabled" ormeasurement
the value of
The parameter identifies the measurement control parameter set (FMCI object) controlling the inter-frequency measureme
The parameter identifies the measurement control parameter set (FMCS object) controlling the intra-frequency measureme
The parameter identifies the parameter set (HOPS object) controlling the intra-frequency handovers of a user having HS-D
This parameter indicates the range of the HSPASCCSpecificATO parameter during anchoring. Range is from 0 ms to 300
If
Thetooparameter
high valueidentifies
is applied,
thetiming of synchronized
measurement control SCC procedure
parameter is jeopardised.
set (FMCS object) controlling the intra-frequency measureme
If too low value is applied, synchronized SCC procedure is delayed.
This parameter identifies the Measurement Control Parameter Set (FMCG object) which controls the inter-RAT (GSM) mea
After the modification of the parameter the new value is used for new connections.
The
This HSPASCCSpecificATO
parameter identifies theisMeasurement
not applied if Control
either the value of VCEL
Parameter parameter
Set (FMCI object)FastActOfTargetServCell is "Disabled"
which controls the inter-frequency or t
measu
This parameter identifies the Measurement Control Parameter Set (FMCS object) which controls the intra-frequency meas
Defines the parameter set (HOPG object) which controls the inter-RAT handover of a non-real time (NRT) radio bearer to t
Defines the parameter set (HOPI object) which controls the inter-frequency handover of a non-real time (NRT) radio beare
This parameter defines the parameter set (HOPS object) which controls the intra-frequency handover of a non-real-time (N
The parameter identifies the measurement control parameter set (FMCG object) controlling inter-system measurements of
The parameter identifies the measurement control parameter set (FMCS object) controlling the intra-frequency measureme
The parameter identifies the measurement control parameter set (FMCI object) controlling inter-frequency measurements
The parameter identifies the measurement control parameter set (FMCS object) controlling intra-frequency measurements
This parameter identifies the parameter set (HOPS object) controlling the intra-frequency handovers of a user having an
This parameter identifies the Measurement Control Parameter Set (FMCG object) which controls the inter-RAT (GSM) mea
This parameter identifies the Measurement Control Parameter Set (FMCI object) which controls the inter-frequency measu
This parameter identifies the Measurement Control Parameter Set (FMCS object) which controls the intra-frequency meas
The parameter defines the parameter set (HOPG object), which controls the inter-RAT handover of a real time (RT) radio b
Defines the parameter set (HOPI object) which controls the inter-frequency handover of a real time (RT) radio bearer to the
This parameter defines the parameter set (HOPS object) which controls the intra-frequency handover of a real-time (RT) ra
This parameter identifies the measurement control parameter set (FMCS object) controlling the intra-frequency measurem
If the value of this parameter is "Not defined", the VCEL parameter RtFmcsIdentifier identifies the FMCS parameter set for
This parameter identifies the parameter set (HOPS object) controlling the intra-frequency handovers of a user having a sta
If the value of this parameter is "Not defined" or the value of the WCEL parameter FastHSPAMobilityEnabled is "Disabled"
This parameter defines the transmission power of the High Speed Shared Control Channel, HS-SCCH. HS-SCCH power is
defined in relation to the pilot bits on the DL DPCCH.
This parameter defines the origin of the last configuration action affecting the VCEL object.
This parameter determines the minimum set E-TFCI for E-DCH. A minimum set of E-TFCI indicates the largest E-TFC that
can
The be used by defines
parameter the UE the independent
maximumofuser the bitUErate
power situation,
allowed given
in a cell forthat
HSDPAa valid ULabsolute
DCH return grant is available
channel. and there to
It is applicable is no
th
transmission on DCH.
This parameter determines how much the HS-DPCCH power offset update is delayed after the active set update during
anchoring.
The parameter The enables
delay enables / disablesthat theserving
use of HS-DSCH
HSUPA in cellthechange
cell. In(or theto
order next activeHSUPA
activate set update)in thecan be executed
virtual cell, licence for the
immediately
HSUPA is after
required thein previous
RNC. active
Activation set
of update
the HSUPA without
in thewaiting
virtual for the
cell HS-DPCCH
does not consumepower offset
capacity update
of the procedure
HSUPA to
licences
The parameter defines the initial bit rate in the downlink that can be allocated by the PS in the schedule situation.
complete. The PSin
the
does RNC.not schedule downlink NRTbit DCH
The parameter defines the initial ratebitinrates that are
the uplink thatbelow
can be theallocated
value of by thisthe
parameter.
PS in scheduleThe allocated
situation. bitPSratedoes
correspon
not
to the
Recommended
schedule highest
uplink bit rate
value in
is the
3000 TFSms. from
The which
HS-DPCCH the TFCS poweris constructed.
offset update is not delayed during anchoring if the value of this
The parameter
parameter defines the minimum allowed bit rate in the downlink that PS can downgrade to the NCR DCH bit rate inbit
is 0 ms.
NRT DCH bit rates below the value of this parameter. The allocated bit rate corresponds to the highest
rate in
congestion the TFS from which the TFCSbit is rate
constructed.
The If the situations.
Note:parameter maximum
definesbit The
the allocated
rate of the RAB
minimum allowed corresponds
is below
bit rate thetouplink
theinvalue the
of thehighest
minimum
that PSbitcanrate in thebit
allowed
downgrade TFS ratefrom
to which
DCHthe bitTFCS
(MinAllowedBitRate)
NRT rate iniscongestio
or initial b
constructed.
rate, it
situations.is allowed
The to
allocated schedule bit a
rate lower NRT
corresponds DCH to bit
the rate.
highest The maximum
bit rate in bit
the rate
TFS of
fromthe RAB
which is
the used
TFCS as isa new minimum
constructed.
Note:
This If the
parameter maximum bit rate of the RAB is below the value of symbol rate of the E-DPDCH(s) of the UE in the cell. initial bi
minimum allowed bit rate (MinAllowedBitRateUL) or
allowed
rate, it is bit rate determines
allowed ortoinitial
schedule
the planned
bit ratea for theNRT
lower
maximum
RRC connection
DCH bit
total uplink
rate. in
Thequestion.
maximum bit rate of theorRAB is bit
used asparameter,
a new minimum or
Note:
This
Note: If
If the
parameter
the maximum
indicates
maximum bit
bit rate
rate of
whether
of the
the RAB
the
RAB Poweris
is below
Offsetthe
below the value
Update
value of
of the
Message
the minimum allowed
Size Optimisation
minimum allowed bit initial
functionality
rate or rate
initial is
bit enabled
rate it is
in theallowe
cell
initial
The
to bit
lowest
schedule rate for
parameter
a lowerthe RRC
NRT valueconnection
DCH among
bitschedule
rate.in
the question.
values
The of(LAC)
maximum the parameters
bit rate of of RAB
the cells that belong tominimum
the E-DCH active setrate
is used
This
during
This
when
parameter
anchoring.
(InitialBitRateUL),
parameter
the E-DCH
contains
it allocated.
defines
is is the
allowed
the Location
to
routing
Signalledarea area acode
within
value lower
the
is NRT ofDCH
location
updated
an bitathe
FD-BTS
area
when rate.
to which
soft
cell.ismaximum
Thethe
handover
used
The FD-BTS
as
coding
branch
abit
new
ofrate
cell the Location
of
belongs.
addition the
or RAB orarea
deletion
initial
is used bit
code
occurs as a for
(two
andnew the
octet
the
RRC
minimum connection
When enabled allowed in
in the question.
cell, or
bit rate this functionality introduces message size optimisation for RRC: PHYSICAL CHANNEL
lowest
LAI value
(Location
RECONFIGURATION changes.
Area Note:initial
Identification)
message, Upgrade bit rate
consists
which
for
isisnotof
used
the RRC
always
PLMNid
to update
connection
possible
and LAC.due
HS-DPCCH If
in capacity
to
LAI
question.
has
power to bereasons
deleted,
offsets. in the
LAC
Unnecessary RNC.
is setThe
as 0xFFFE.
IEs (namely Downlink
The routing area identification (RAI) consists of the location area identification (LAI) and the RAC. LAI consists of the P
information common for all radio links IE and Downlink information per radio link list IE) are omitted resulting that message
The
size is reduced. In some cases it will reduce from 2 to 1 TB (Transport Block). Message size reduction leads to fastercell
final maximum total uplink symbol rate is minimum of the following limitations: UE capability, BTS capability, this and
based
This limitation,
moreparameter
reliable possiblethe
controls
signaling. limitation
usage of which is set based on maximum
the RNSAP:Relocation Commituplink user bit
procedure rate the
during of the RAB and
execution of actual availablehard
an Inter-RNC
capacity in the RNC.
handover.
This parameter defines the VCEL Object.
The Power Offset Update message size is not optimised if either the value of this parameter is "Disabled" or the value of th
Information
When
WCELthe is signalled
Relocation
parameter to UE procedure
Commit using the RRC:
FastHSPAMobilityEnabled isMaximum
is used, the MSchannelisation
"Disabled". is not allowed to codes
return IE to
andthetooldthechannel.
DRNC using If the the RNSAP: of
establishment
Maximum
new physical Setchannel
of E-DPDCHs fails, the IE.call (RT RB's) is dropped.
Bit 0: CS AMR codec set (12.2), Bit 1: CS AMR codec 0 0

Bit 0: CS WAMR codec set {12.65, 8.85, 6.6}, 0 0
8 kbps (8), 16 kbps (16), 32 kbps (32), 64 kbps 384 kbps (384) 384 kbps (384)
(64),
8 kbps128
(8),kbps (128),(16),
16 kbps 25632
kbps
kbps(256),
(32),320 kbps
64 kbps 384 kbps (384) 384 kbps (384)
(320),
(64), 384 kbps
128 kbps (384)
1 antenna (0), 2(128), 256 kbps
antennas (1), 4(256), 320 kbps
antennas (2) 2 antennas (1) 2 antennas (1)
(320), 384 kbps (384)
1...20, step 1 1 1

32kpbs (32), 64kbps (64), 128kbps (128), 256kbps 32kpbs (32) 32kpbs (32)
32kbps (32), 64kbps (64), 128kbps (128), 256kbps 32kbps (32) 32kbps (32)
1...100, step 1, Not defined (0) Not Applicable Not Applicable
0...300 ms, step 10 ms 100 ms 100 ms
1...100, step 1, Not Defined (0) 0 0
1...100, step 1, Not Defined (0) 0 0
1...100, step 1, Not Defined (0) 0 0
1...100, step 1, Not Defined (0) 0 0
1...100, step 1, Not defined (0) 0 0
1...100, step 1, Not defined (0) 0 0
1...100, step 1, Not defined (0) 0 0
1...100, step 1, Not defined (0) 0 0
1...100, step 1, Not defined (0) 0 0
1...100, step 1, Not Defined (0) 0 0
1...100, step 1, Not Defined (0) 0 0
1...100, step 1, Not Defined (0) 0 0
1...100, step 1, Not Defined (0) 0 0
1...100, step 1 0 0
1...100, step 1 0 0
-32...31.75 dB, step 0.25 dB 3 dB 3 dB
Not Defined (0), Network originated configuration Not applicable Not applicable
action (1), NetAct RNW plan originated
configuration action (2), Element Manager
0...120, step
originated 1
configuration action (3), Configuration 960 kbps, SF4 (0)960 kbps, SF4 (0)
action by automatic tuning
16 kbps (1), 64 kbps (3), 128function (4), 384
kbps (4), Element
kbps (6384 kbps (6) 384 kbps (6)
Manager originated mass
0...5000 ms, step 100 ms config action (5), 0 ms 0 ms
NetAct originated direct RNW change (6)
8kbps (8), 16kbps (16), 32kbps (32), 64kbps (64), 64kbps (64) 64kbps (64)
128kbps
8kbps (8),(128), 256kbps
16kbps (256), 384kbps
(16), 32kbps (384)(64),
(32), 64kbps 64kbps (64) 64kbps (64)
128kbps (128),
8 kbps (8), 256kbps
16 kbps (16), (256),
32 kbps384kbps
(32), 64(384)
kbps 8 kbps (8) 8 kbps (8)
(64), 128 kbps (128), 256 kbps (256), 384
8 kbps (8), 16 kbps (16), 32 kbps (32), 64 kbps kbps 8 kbps (8) 8 kbps (8)
(384)
(64), 128 kbps
960 kbps, SF4 (128), 256kbps,
(0), 1920 kbps 2*SF4
(256), (1),
384 3840
kbps 960 kbps, SF4 960 kbps, SF4
(384)
kbps, 2*SF2
Disabled (0), (2)
Enabled (1) (0) (0)
Disabled (0) (0)
Disabled

Not used (0), Used (1) Not used (0) Not used (0)
O2 UK Range for
O2 UK Value Comments
Optimisation
0
0
5
Enabled (1)
384 kbps (384)
384 kbps (384)
2 antennas (1)
1
Disabled (0)
Disabled (0)
Disabled (0)
64kbps (64)
64kbps (64)
20
20
20
49
100 ms
20
15
1
5
1
50
49
41
33
11
23
50
1
1
4
1
50
50
4
50
3 dB
Not applicable
4
384 kbps (6)
0 ms
Disabled (0)
64kbps (64)
64kbps (64)
64kbps (64)
64kbps (64)
960 kbps, SF4 (0)
Disabled (0)
65535
255
Not used (0)
1
Classification Parameter Type? IPD PTY ID
Frequency
New in RU20
New in RU20
New in RU20
New in RU20
New in RU20
New in RU20
New in RU20
New in RU20
New in RU20
New in RU20
New in RU20
New in RU20
New in RU20
New in RU20
New in RU20
New in RU20
New in RU20
New in RU20
New in RU20
New in RU20
New in RU20
New in RU20
New in RU20
New in RU20
New in RU20
New in RU20
New in RU20
New in RU20
New in RU20
New in RU20
New in RU20 on TOP New in RU30 New in RU40 New in RU50 EP1
New in RU20 on TOP
New in RU40
New in RU40
New in RU40
New in RU40
New in RU20 on TOP

New in RU20 on TOP
New in RU20 on TOP
New in RU20 on TOP New in RU40
New in RU40
New in RU20 on TOP
New in RU30
New in RU30
New in RU30
New in RU30
New in RU30
New in RU40
New in RU40
New in RU20 on TOP
New in RU20 on TOP

New in RU30
New in RU20 on TOP
New in RU20 on TOP

New in RU20 on TOP New in RU40
Issue in Which
Parameter Added or
Last Changed
9.0
8.3
8.3
8.3
8.3
9.0
8.3
9.0
9.0
9.0
8.3
9.0
9.0
9.0
8.3
9.0
9.0
WAC Parameters
Abbreviated Name

MACdflowthroughputAveWin
MACdflowutilRelThr
MACdflowutilTimetoTrigger
WaitTimeRRC - WaitTimeRRCbackground
WaitTimeRRC - WaitTimeRRCconversational
WaitTimeRRC - WaitTimeRRCemergency
WaitTimeRRC - WaitTimeRRChighPrioritySignalling
WaitTimeRRC - WaitTimeRRCinteractive
WaitTimeRRC - WaitTimeRRCinterRATreselection
WaitTimeRRC - WaitTimeRRClowPrioritySignalling
WaitTimeRRC - WaitTimeRRCother
WaitTimeRRC - WaitTimeRRCregistration
WaitTimeRRC - WaitTimeRRCstreaming
WaitTimeRRC - WaitTimeRRCsubscribed
WaitTimeRRC - WaitTimeRRCunknown
PrxNoiseMaxTuneAbsolute
DCHUtilRelAveWin
DCHUtilRelThrDL
DCHUtilRelThrUL
DCHUtilRelTimeToTrigger
EDCHMACdFlowThroughputAveWin
EDCHMACdFlowThroughputRelThr
HSDPAinitialBitrateUL
HSDPAInitialBRULStrNRT
HSDPAMaxBitrateUL
HSDPAminAllowedBitrateUL
HSDPAMinBRULStrNRT
InactCPCBatOptT
InactCPCNoBatOptT
InactHSRACH
InactivityTimerDownlinkDCH - InactivityTimerDownlinkDCH128
InactivityTimerUplinkDCH - InactivityTimerUplinkDCH128
InactNonCPCBatOptT
InactNonCPCNoBatOptT
TrafVolPendingTimeDL
TrafVolPendingTimeUL
TrafVolThresholdULLow
Telecom Parameters
MSActivitySupervision
UL_DL_activation_timer
O&M Parameters
WACChangeOrigin
WACId
Window size of the MAC-d flow throughput measur WAC AC

Low utilisation threshold of the MAC-d flow WAC AC
Low utilisation time to trigger of the MAC-d flow WAC AC
RRC wait time for background causes WAC AC
RRC wait time for conversational causes WAC AC
RRC wait time for emergency causes WAC AC
RRC wait time for high priority signalling causes WAC AC
RRC wait time for interactive causes WAC AC
RRC wait time for inter-RAT re-selection causes WAC AC
RRC wait time for low priority signalling causes WAC AC
RRC wait time for other causes WAC AC
RRC wait time for registration causes WAC AC
RRC wait time for streaming causes WAC AC
RRC wait time for subscribed causes WAC AC
RRC wait time for unknown causes WAC AC
Absolute limit in uplink noise autotuning WAC LC
Window size for the release throughput measureme WAC PS

Threshold for the downlink DCH release measurem WAC PS
Threshold for the uplink DCH release measurement WAC PS
Time to trigger for the release throughput measure WAC PS
Window size of E-DCH MAC-d flow throughput mea WAC PS
Low throughput threshold of the E-DCH MAC-d flow WAC PS
Low throughput time to trigger of the E-DCH MAC-d WAC PS
Initial bitrate for HSDPA associated UL DCH WAC PS
Initial bitrate for HSDPA UL DCH for NRT with strea WAC PS
Maximum bit rate for HSDPA UL DCH return channe WAC PS
Minimum bitrate for HSDPA associated UL DCH WAC PS
Min bitrate for HSDPA UL DCH for NRT with stream WAC PS
Inactive CPC user with battery optimization timer WAC PS
Inactive CPC user without battery optimization timer WAC PS
Inactive HS-RACH capable UE WAC PS
Inactivity timer for downlink 128kbps DCH WAC PS
Inactivity timer for uplink 128kbps DCH WAC PS
Inactive nonCPC user with battery optimization time WAC PS
Inactive nonCPC user without battery optimization t WAC PS
Downlink traffic volume measurement pending time a WAC PS
Uplink traffic volume measurement pending time afte WAC PS
Uplink traffic volume measurement low threshold WAC PS
Time supervision of user inactivity (for NRT RBs) WAC Telecom

UL/DL activation timer WAC Telecom
WAC Change origin WAC O&M

WAC Identifier WAC O&M
This parameter defines the averaging window 0...10 s, step 0.5 s, MAC-d flow throughput measure
size
This for the throughput
parameter definesmeasurement of the
the low utilisation 0...64000 bps, step 256 bps, Low utilisation indicati
MAC-d
thresholdflow.
of the defines
throughput measurement of
This parameter the low utilisation time 0...300 s, step 0.2 s
the MAC-d flow.
The throughput
Defines the value measurement
of the Wait Time measures the
included 0...15 s, step 1 s
number
The of bits
threshold transmitted
is defined by MAC-d
as a Time
number during
of bitsin
Defines
the themeasurement
value of the Wait included 0...15 s, step 1 s
per sliding
the second.
RRC: RRCTheConnection
throughput window. The
measurement
Reject
sliding
message,
measurement
Defines thethe
measures window
value of the
number is defined
ofWait with the
Time included
bits transmitted by 0...15 s, step 1 s
when the Establishment
parameter Cause
MACdflowthroughputAveWin. value
MAC-d
Defines
received during
the the
value
originally sliding
of the measurement
Wait Time included in 0...15 s, step 1 s
Value
window.0 means thatinthe
theMAC-d
RRC: RRC flow
Connection
Defines
throughput Request
themeasurement
value message
of the Wait is:
Time
is not included i
activated. 0...15 s, step 1 s
Originating Conversational Call, Terminating
Defines the value
Conversational of the Wait Time included i
Call. 0...15 s, step 1 s
Defines the value of the Wait Time included in 0...15 s, step 1 s
Defines the value of the Wait Time included 0...15 s, step 1 s
Defines the value of the Wait Time included i 0...15 s, step 1 s
The parameter sets absolute limit for uplink 0...60 dB, step 0.5 dB, Noise autotuning is not limit
This parameter defines the release sliding 500...10000 ms, step 500 ms, Release throughput m
measurement window size for uplink
This parameter defines the release threshold 0...8000 bps, step 32 bpsand
downlink
for the NRT dedicated
release throughput channels. The of
This
release parameter
sliding defines themeasurement
measurement release
window threshold
is used 0...8000 bps, step 32 bps
the NRT DCH in downlink direction.
in
This parameter defines the period of the The
the release throughput measurement. time 0...10000 ms, step 200 ms
release
The throughput
threshold is measurement
defined as a number measuresof bits
This
the parameterreceived/sent
defines the size bitsof in the slidi 0.5...10 s, step 0.5 s, E-DCH MAC-d flow throughput
per number
second. of The release throughput UL/DL
NRT
This DCH during
parameter
measurement the sliding
defines
measures the
thelowmeasurement
number throughput of all th 0...64000 bps, step 256 bps
window
transmitted period. The
bits defines measurement
during the window
This parameter thesliding
low throughput 0...300 s, step 0.2 s
size is commonwindow.
measurement for all NRT DCH data rates
time
The16, to the
parameter trigger timer
determines for the
the throughput
initial bit rate 16 kbps (1), 64 kbps (3), 128 kbps (4), 384 kbps (6
(8, 32, 64, 128, 256, and 384 kbps).
measurement of the E-DCH NRT MAC-d flow.
This
If theparameter
result of the defines
throughput the initial bit rate f is 16 kbps (1), 64 kbps (3), 128 kbps (4)
measurement
The value 0 s of this parameter means that
lower
The than
parameter or equal
defines to the
the maximum user bit ra16 kbps (1), 64 kbps (3), 128 kbps (4), 384 kbps (6
release throughput measurement is not
EDCHMACdFlowThroughputRelThr, the
active.
The parameter determines the minimum allowed
EDCHMACdFlowThroughputTimetoTrigger is 16bkbps (1), 64 kbps (3), 128 kbps (4), 384 kbps (6
started.
This If the result
parameter definesof the thethroughput
minimum allowed 16 kbps (1), 64 kbps (3), 128 kbps (4)
measurement
uplink bit rate is higher
for the than the
HSDPA associated
The parameter defines how long inactiveUL 0 s (0), 2 s (1), 4 s (2), 6 s (3), 8 s (4), 10 s (5), 12
EDCHMACdFlowThoughputRelThr,
DCH return channel for the NRT Radio the
CPC
The user that benefits
parameter defines from
how long battery inactive s (6), 142ss(7), (1),16 4 ss(2),
(8),618 s (9),8 s20(4),
s (10),
10 s 22 (5),s 12
Bearer
consumption that exists simultaneously
optimization is kept with
in a PS is 0
Cell_DCH
s (0),
(11), 24 s (12), 26 s (13),
s (3),
28 s (14), 30 s (15), 32 s
CPC
stopped
streaminguserand
The parameter that
Radio does
reset. Ifnot
Bearer.
defines the benefit
how timer
This long from
bitexpires,
rate battery
is
inactive the
used s0...60
HS-RACH (6), capable
14 s (7),1UE
s, sstep 16
s iss (8),
kept 18 sCell_DCH
in38 (9), 20 s (10),state 22 s time
after to triggers for HSDPA
state after
consumption time to triggers
optimization for HSDPA low (16),
(11), 24 s (12), 26 s (13), 28 s (14), 30 s (15), 32 ss
34 (17), 36 s (18), s (19), 40 s (20), 42
E-DCH
by NRT MAC-d
the packet scheduler flowwhenisisreleased,
kept it isin Cell_DCH
utilization
The
state time
after and E-DCH
indicating
time howThe
torates.
triggers low throughput
long
for the
HSDPA radiobithave
lowand (21),
0...2034
(16), 44 s
s, sstep (22),
(17), 46
1 36 s (23),
s, Infinity
s (18),(255) 48 s (24), 50
38 s (19), 40and s (25),
s (20), 52 s
assuming
downgrading
When
triggered. low that
transmission
also
bit
utilization
resources
the corresponding
is detected
are
allocated
reserved for HSDPA HS-
after
rateMAC-d(26), flow
54 ss(MACdflowutilTimetoTrigger)
(27), 56 ss (28), 58 ss (29), 1 min low 42
(30),
s
throughput
1s for E-DCH MAC-
utilization
DSCH
corresponds
The NRT and
time indicating E-DCH
MAC-d flow
to the highest low
how long is throughput
allowed
bitthe rate to
radio have
be
in the and (21),
TFS 0...20 44s,(31), (22), 46
step 11 min (23),
s, infinity 48 (24), 50 s
(255)1 min 15 s (33), 1 (25), 52
silence
triggered. detection on downlink DCH before min
(26),5 s
54 sand (27), 56HS-RACH10 s (32),
s (28), 58has s (29), 1 min (30), 1
released.
from which the TFCS
transmission
This
When
The
release timer
timelow is resources
applicable
utilization
indicating
procedures. howisisdetected
Timer
constructed.
are
only
longis
reserved
ifdefined
UEfor
the radio after
isHSDPA
HS-RACH
and capable
min 20
0...20
min 5 s (34),the
s,s(31),
step 11min
1 s,min 25s s(32),
Infinity
10 (35),11min
(255) been
min15 configured
30 s (36),11 in the "main cell" of the ac
s(33),
silence
MAC-d detection
flow on downlink
(MACdflowutilTimetoTrigger) DCH before and min 35 s (37), 1 min 40 ss (38),
transmission
separately
When
The
release
Note timelow forresources
each how
utilization
indicating
procedures.
special value
bit
Timer
'255':
are
rate.
is detected
long
UE
reserved
thefor
is capability
defined radio after
HSDPA and
of HS-RACH min 20
0...20 iss,ssnot(34),
step 11s,min
taken 25
Infinity
into (35), 1
(255)
account,
min
minis45
1that 30
this
ss (39),
(36),
timer
1
1is not used.
low throughput
silence
MAC-d detection
flowfor foronE-DCHdownlink MAC-d
(MACdflowutilTimetoTrigger) DCH flow
before min 50 (40), 1 min 55 s (41),
and min 35 s (37), 1 min 40 s (38), 1 min 45 s (39), 1 2 min (42), 2 min
transmission
separately
The timeprocedures.resources
each
indicating bit
how are
rate.
long reserved
the after
radiothat and 0...20 s, step 1 s,20Infinity (255)
(EDCHMACdFlowThroughputTimetoTrigger),
release
Parameter
low throughput valuefor255 E-DCHTimer is defined
(infinity)
MAC-d means flow 10
mins50 (43),s (40),2 min 1 mins55 (44), 2 min
s (41), 2 30
mins(42),
(45),22min min
silence
transmission detection on
resources downlink
are DCH
reserved before
after
the RB
separately
NRT DCH can be
for released.
each
inactivity bit When
rate.
supervision
(EDCHMACdFlowThroughputTimetoTrigger), this has
is not that used. 10 s (43), 2 min 20 s (44), 2 min 30 s (45), 2 mins
40 s (46), 2 min 50 s (47), 3 min (48), 3 min 20
release
Parameter
silence procedures.
value
detection 255
onRBs Timer is defined
(infinity)
downlink means
DCH before
happened
the RB to all
caninactivity
beeach the
released. of the
When this user, the
has user (49), 3 min240 mins (50), 4 min3(51), 4 min320 mins (52),
separately
NRT
release
can DCH for
procedures. bit rate.
supervision
Timer is defined isstate.
not used. 40 s (46), 50 s (47), min (48), 20 s
happened to all the RBs of the user, the user (49), 3 min 40 s (50), 4 min (51), 4 min 20 s 6
be
Parameter transferred
value to
255 Cell_FACH
(infinity) means that 4 min 40 s (53), 5 min (54), 5 min 30 s (55), min
(52),
separately
Instead
NRT DCH of for each
state
inactivity bit
transition, rate.the user
supervision is can
not be
used. (56), 7 min (57), 8 min (58), 9 min (59), 10 min
can be transferred
Parameter value 255 to Cell_FACH
(infinity) means state. that 4 min 40 s (53), 5 min (54), 5 min 30 s (55), 6 min
kept
Instead longer in the
of state Cell_DCH
transition, thestate.
user This timer (60),
canused.
be (56), 127 min min(57),
(61),814 minmin (58),(62), 15 min
9 min (59),(63),
10 min16 min
NRT
ParameterDCH inactivity
value 255 supervision
(infinity) is
means not that
defines
kept longer in the Cell_DCH state. This timer (60), 12 min (61), 14 min (62), 15 min (63), 24
how much longer the user can be (64), 18 min (65), 20 min (66), 22 min (67), 16 min
min
NRT
kept DCH
in inactivity
Cell_DCH supervision
state even if it isis not used.all (68), 26 min (69), 28 min (70), 30 min (71), 35 min
inactive
defines how much longer the user can be (64), 18 min (65), 20 min (66), 22 min (67), 24 min
The time indicating how long the radio and 0...20 s, step 1 s, Infinity (255)
transmission resources
The time indicating how long the radio and are reserved after 0...20 s, step 1 s, Infinity (255)
silence
transmission detection resourceson downlink are DCH before
reserved after
The
release timeprocedures.
indicating how long the radio and 0...20 s, step 1 s, Infinity (255)
silence
transmission detection resourceson Timer
downlink
are
is defined
DCH before
reserved after
separately
The
release for
timeprocedures. each
indicating how bit rate.
long the radio and 0...20 s, step 1 s, Infinity (255)
silence
transmission detection resourceson Timer
downlink
are
is defined
DCH before
reserved after
separately
The
release for
timeprocedures.
indicatingeach bit
how rate.
long the radiothat and 0...20 s, step 1 s, Infinity (255)
Parameter
silence
transmission
value 255
detection resourceson Timer(infinity)
uplink are
isDCH defined
means
reserved before after
separately
NRT
The
release DCH
time for
indicating
procedures. each
inactivity bit
how rate.
supervision
long the isradio
not that
used.
and 0...20 s, step 1 s, Infinity (255)
Parameter
silence
transmission
value 255
uplink are
isDCH defined
means
separately
NRT
The
release DCH
time for
indicating
procedures. each
inactivity bit
how rate.
supervision
long the isradio
not that
used.
Parameter
silence
transmission
value 255
uplink are
isDCH defined
means
separately
NRT
The
release DCH
time for
indicating
procedures. each
inactivity bit
how rate.
supervision
long the isradio
not that
used.
Parameter
silence
transmission
value 255
uplink are
isDCH defined
means
separately
NRT
The
release DCH
time for
indicating
procedures. each
inactivity bit
how rate.
supervision
long the isradio
not that
used.
Parameter
silence
transmission
value 255
uplink are
isDCH defined
means
separately
NRT
The
release DCH
time for
indicating
procedures. each
inactivity bit
how rate.
supervision
long the isradio
not that
used.
Parameter
silence
transmission
value 255
uplink are
isDCH defined
means
separately
NRT
The
release DCH
time for
indicating
procedures. each
inactivity bit
how rate.
supervision
long the isradio
not that
used.
Parameter
silence
transmission
value 255
uplink are
isDCH defined
means
separately
This
NRT
The
release parameter
DCH
parameter for each
inactivity
procedures. defines bit
defines, rate.
in
supervision
Timer bytes,
howislong defined the
isinactivethreshold
not that
used. non 0ofsdata(0), 2insthe
(1),RLC buffers
4 s (2), of SRB3,
6 s (3), 8 s (4), SRB4
10 s and
(5), 12all NRT RBs that triggers the
Parameter
silence value
detection 255
on (infinity)
uplink DCH means before
If
CPC threshold
user that is exceeded,
benefits from UE is directly
battery transferred to Cell_DCH state. Otherwise, UE sends data on RACH.
separately
NRT
The
release
Parameter DCH
parameter for each
inactivity
procedures.
value defines
255
bit rate.
supervision
Timer howislong
(infinity) definedisinactive
means not that
used. non s0 (6),
s (0),142ss(7),
(1),164 ss(2),
(8),618 s (9),
s (3), 8 s20(4),
s (10),
10 s 22(5),s 12
consumption
CPC user that optimization
does notrate. is keptfrom in Cell_DCH (11), 24 ss(12), 26ss(8),
(13),1828 s (14),
20 30 s (15),
22 32 s
separately
NRT
This
state DCH
parameter
after for each
inactivity
time is255
to bit
triggers tobenefit
supervision
sent
indicates the
for UE
time
HSDPA notbattery
isusing
(in lowan RRC:s(16),
used. (6),ms
250 14(25),
MEASUREMENT
34 s
(7),500
(17),
16
36 ms
sCONTROL
(50),
(18),
s (9),
1000
38 s ms
(19),
s(100),
message.
40
(10),
s 2000
(20),
s ms
42
Parameter
consumption
Note:
seconds) TVM
value
with
during optimization
adjacent
which
(infinity)
MAC-D is kept
cells
means
are
of in good
RNC
that
Cell_DCHto
is be (11), as
same 24 otherwise
s (12), 26 unnecessary
s (13), 28 s (14), 30 s (15),
signalling (TVM ss
32measurement reconfiguratio
utilization
NRT
This
state DCH
parameter
afterto and
time E-DCH
inactivity indicates
to triggerslow
supervision throughput
the
for time
HSDPA is (in have
not that
used. (16),
low (21),
250 ms 44 s (22),
34 (25),
s (17),50046
36mss (23), 48
(50),38
s (18), s
1000 (24),
ms 40
s (19), 50 s
(100),(25),
2000
s (20), 52
42ms ss
Parameter
forbidden
triggered. value
send 255
any (infinity)
new means
downlink capacity (26), 54 s (27), 56 s (28), 58 s (29), 1 min (30), 1
seconds)
utilization DCHduring
and E-DCH which UEthroughput
low is forbidden to
NRT parameter
This
requests
send any with
inactivity
newthe
is same
traffic
supervision
omitted
volume RBif id, Data even
measurement if have
isSession
not used.
the (21),
8
Profilingbytes
min
44 (8),
feature
554
s (22),
s (31), 16
is 46 s (23),
bytes
1activated
min 10(16),
sand
48
(32),
sbytes
(24),Data
32Large
1(29),
50 sTime
min (32),
15
(25),
64 bytes
s (33),
52 s
timer
1 1 is running for UE. In this
triggered.
triggering condition isisfulfilled again. (26), s (27), 56 s (28), 58 s 1 min (30),
When low
reports with utilization
the same detected
traffic volume for HSDPA
event min
min 205 s s(31),
(34),11minmin10 25s s(32),
(35),11min
min15 30s s(33),
(36),11
MAC-d
identity,
When flow
even (MACdflowutilTimetoTrigger)
if
low utilization the triggering
is detected condition
for HSDPA is and min
min 35 s (37),
20 s min, 1
(34),step min
1 min 40 s (38),
(35), 1 min 30 s (39),
1 min
25 s Cell_PCH/URA_PCH 45 s (36), 1 1state
The
This MSActivitySupervision
parameter also indicates timer the istime
used (in in 0...1440 1 min,
low
fulfilled
MAC-d throughput
again.
flow for E-DCH
(MACdflowutilTimetoTrigger) MAC-d flow and min
min 50
35 s
s (40),
(37), 1
1 min
min 55
40 s
s (41),
(38), 2
1 min
min (42),
45 s 2 min1
(39),
the
seconds)
This RRC states
timerduring CELL_PCH
is usedwhich on MAC MAC-D and
-c toofdetect URA_PCH
RNC idle is p 10 1...120 s, step
(EDCHMACdFlowThroughputTimetoTrigger),
low throughput foranyE-DCH MAC-d flow s (43), 2 min1 20 s s (44), 2 min 30 s (45), 2 min
for supervising
forbidden to send the inactivity
new of NRT
downlink RAB(s). min 50 s (40), 1 min 55 s (41), 2 min (42), 2 min
the
This RB parameter also indicates the time during 10 s (43), 2 min 20 ss (47),
can be released.
(EDCHMACdFlowThroughputTimetoTrigger), When this has 40 s (46), 2 min 50 (44), 32 min
min (48), 3 min220
30 s (45), mins
release/downgrade
happened
which the to
UE all
blocksthe requests
RBsDTCH of the due user,
transmissionsto lowthe user
on (49), 3 min 40 s (50), 4 min (51), 4 min 20 s (52),
the
ThisRB
The
utilised timercan
parameter
NRT be
starts
DCH released.
when
defines
with athe When
state
the origin
same this ofhas
transition the to
dedicated last con40
Not sdefined
(46), 2 min 50 s (47),originated
(0), Network 3 min (48), 3 min 20 s a
configuration
can
the
happened be
RACH transferred
after
to all athe toRBsCell_FACH
measurement of the state.
report
user, the isuser 4 min
(49), 340
min s (53),
40 s 5 min4(54),
(50), min 5 min430
(51), mins (55),
20 s 6 min
(52),
either
transport state is
channel, executed.even The
if triggering
Instead
Identifies of state
the WAC to transition
object the
instance user can be
uniquely. (56), 7 min (57), 8 min (58), 9 min (59), 10 min
triggered.
can be transferred
MSActivitySupervision
condition is in
fulfilled Cell_FACH
again. timer stopsstate. when any T 4 1...20,
min 40 step 1 5 min (54), 5 min 30 s (55), 6 min
s (53),
kept
Instead longer
of state the Cell_DCH
transition, the state.
user This
can timer (60),
be (56), 12
7 minmin(57),
(61),814minmin (62),
(58), 15 min
9 min (59),(63), 16 min
10 min
activity of NRT RAB(s) is detected and the
defines
The
keptisparameter how
longer much
in totheisthe longer
sent
Cell_DCH the
to UE state. user
usingorThis can
an RRC:betimer (60), 12 min (61), 14 min (62), 15 min (63), 24
(64), 18 min (65), 20 min (66), 22 min (67), 16 min
min
MS moved CELL_FACH
kept
MEASUREMENTin Cell_DCH
defines how state. state
CONTROL even
much longer the user can be if it is
message. inactive all (68),
(64), 18 min (65), 20 min (66), 22 min (67), 35
26 min (69), 28 min (70), 30 min (71), 24 min
min
CELL_DCH
the
keptperiod.in Cell_DCH state even if it is inactive all (72), (68), 40
26 min
min (73),
(69), 45
28 min
min (74),
(70), 50
30 min
min (75),
(71), 55
35 min
min
This
the parameter also indicates the value)
time (in (76),
(72), 140hmin(77),(73),
1 h 45
30 min
min (74),
(78), 50
2 hmin
(79), 2 h 5530 min
min
Theperiod.timer restarts (from the initial (75),
This
seconds) timer is applied to users which have: (80), 3 h (81), 4 h (82), 5 h (83), 6 h (84), 7 h (85),
when the during inactivity which
of the MAC-D NRT RAB(s) of RNCisis for (76), 1 h (77), 1 h 30 min (78), 2 h (79), 2 h 30 min
-bidden
Continuoustoandsend Packet
any Connectivity is not 8 h (86),
3h9 h (87),
4 h 10 h (88), 11 h6(89), 12 7h h(90),
This
detected timer is applied
the MSnew to
is usersuplinkwhich
moved backhave: to the (80), (81), (82), 5 h (83), h (84), (85),
activated
release/downgrade (DTX
- ContinuousorPacket and DRX
request parameters
Connectivity due to is notIn the 8 h (86), 9 h (87), 10 h (88), 11 h (89), 12 48
low defined 15 h (91), 18 h (92), 21 h (93), 24 h (94), h
h (90),
CELL_PCH URA_PCH state again.
with
utilised CPCPar are not send to dedicated
BTS anddefined UE) (95), infinitely
18 h(96)
activated
expiry ofNRT(DTX
the DCH and withDRX
MSActivitySupervisionsame parameters timer, 15 h (91), (92), 21 h (93), 24 h (94), 48 h
-transport
UE has not indicated that it does not benefit
with
whenCPCP the channel, not even
are"inactive
first sendstate iftothe BTS triggering
and UE)(that (95), infinitely (96)
indication"
from
condition
-is,UE battery consumption
is fulfilled
has indicated again. optimization
cell/URA updatethat which it doesdoesnot notbenefit
cause the
(optional IE
from battery of in RRC)
consumption optimization
(re)initiation the signalling or data flow) is
(optional from
received IE in the RRC) MS, the RNC asks SGSN
to release the Iu connection.
Note! If the parameter value is set to zero,

the state transition to CELL_PCH/URA_PCH
is not allowed. When inactivity is detected in
the CELL_FACH state, the MS is switched to
the idle mode.
O2 UK Base Value
WAC-ID 1
3s 3s 3s
256 bps 256 bps 0 bps
0s 0s 0s
5s 5s 10 s
3s 3s 5s
1s 1s 1s
1s 1s 7s
5s 5s 10 s
3s 3s 10 s
5s 5s 10 s
0s 0s 15 s
1s 1 s (5 s for NEC and Sanyo Ues) 10
3s 3s 5s
3s 3s 5s
1s 1s 5s
255 255 20 dB
1000 ms 1000 ms 1000 ms

256 bps 256 bps 256 bps
256 bps 256 bps 256 bps
200 ms 200 ms 200ms
3s 3s 3s
256 bps 256 bps 256 bps
0s 0s 3s
64 kbps (3) 64 kbps (3) 64 kbps (3)
64 kbps (3) 64 kbps (3) 64 kbps (3)
384 kbps (6) 384 kbps (6) 384 kbps (6)
64 kbps (3) 64 kbps (3) 16 kbps (1)
64 kbps (3) 64 kbps (3) 64 kbps (3)
0 s (0) 0 s (0) 0 s (0)
3 min (48) 3 min (48) 3 min (48)
0s 0s 0s
2s 2s 5s
5s 5s 5s
2s 2s 2s
5s 5s 5s
2s 2s 2s
2s 2s 5s
3s 3s 5s
5s 5s 5s
2s 2s 3s
5s 5s 3s
2s 2s 2s
5s 5s 3s
2s 2s 2s
2s 2s 3s
3s 3s 3s
5s 5s 3s
0 s (0) 0 s (0) 0 s (0)
0 s (0) 0 s (0) 0 s (0)
2000 ms 2000 ms 2000 ms
2000 ms 2000 ms 2000 ms
128 bytes 128 bytes 256 bytes
15 min 15 min 29 min

2s 2s 5s
- - Not Applicable
- - 1
RB083 Special Events
Value O2UK Range for Optimisation Comments
WAC-ID 2
3s Moved from RNHSPA to WAC

0 bps Moved from RNHSPA to WAC
10 s Moved from RNAC to WAC Moved from RNAC to WAC
5s Moved from RNAC to WAC Moved from RNAC to WAC
10 Moved from RNAC to WAC Moved from RNAC to WAC
20 dB Moved from RNAC to WAC Moved from RNAC to WAC
1000 ms Moved from RNPS to WAC

256 bps Moved from RNPS to WAC
256 bps Moved from RNPS to WAC
200ms Moved from RNPS to WAC
256 bps Moved from RNHSPA to WAC
16 kbps (1) Moved from RNHSPA to WAC
64 kbps (3) Moved from VCEL & WCEL to WAC
0 s (0) Moved from RNHSPA to WAC
3 min (48) Moved from RNHSPA to WAC
0s
3s Moved from RNPS to WAC
256 bytes Moved from RNPS to WAC
29 min Moved from RNC to WAC

5s Moved from RNC to WAC
Not Applicable
2
Discrepancy - Discrepancy Checking
Classification IPD PTY ID
Criticality Frequency

Changed to 0 bps Nov 10780 Extended Discrepancy
2007 to support HSDPA 10698 Extended Discrepancy
Rollout To be reviewed
Change
in tandem made
with as
lowper 10658
issued Change
throughput
Change made as Request
mechanism
per 10955
Form
(See Row
issued 131) Request
Change 10628
Form
Change made as per 10768
issued
ChangeChange
made as Request
per 10798
Form
issued Change Request
Form
issued
ChangeChange
made as Request
per 10872
Form
Form
issued Change
Increased to 10 Request
seconds 10907
Form
in line with Nokia
TB_RNC_SW_2007_01
issued Changeas Request
Change
0. Testedmade per
and Approved 10901
Form
by ATS.I&T
Change made Julyas2007.
per 10811
Form
See
issuedembedded
Change Request
comment.
Form
Changed to 200ms after 10824 Extended Discrepancy

the Inactivity Timer Trial 10740 Extended Discrepancy
Changed to 200ms after 10803 Extended Discrepancy
the Inactivity Timer Trial
Validated/amended 38237 Extended Discrepancy
February 2009 as part of
Validated/amended 38238 Extended Discrepancy
HSPA and
February Secondpart of
2009
Changed
Carrier to 3s as
after the
development. 38239 Extended Discrepancy
HSPA andTimer
Inactivity Second
Trial
Carrier development. 10726 Extended Discrepancy
Changed to 16 kbps (1) 10627 Extended Discrepancy

for rollout of TBO July 12600 Extended Discrepancy
2009
RAN1644 Continuous
Packet
RAN1644 Connectivity
Continuous
Packet Connectivity
10920
10951
10649
10974
10961
10844
10840
10783
Changed to 3s after the 10859
Inactivity
Changed Timer Trial the
to 3s after 10771
Inactivity Timer Trial 10728
Inactivity Timer Trial 10809
Inactivity
to 3s after 10629
Inactivity
to 3s after 10748
Inactivity
RAN1644Timer Trial
Continuous
Packet
RAN1644Connectivity
Continuous
Packet Connectivity 10936 Extended Discrepancy
Changed to 256 bytes 11198 Extended Discrepancy
January 2010 following
trials
O2 packet scheduling 10727 Extended Discrepancy
strategy. Reduced to 5
secs (from 10 secs) 16th
Jan 2009 following trial.
See Trial Report
UKRE/08/098
New in RU40 8.00

New in RU40 8.00
New in RU40 8.00
New in RU40 8.00
New in RU40 8.00
New in RU40 8.00
New in RU40 8.00
New in RU40 8.00
New in RU40 8.00
New in RU40 8.00
New in RU40 8.00
New in RU40 8.00
New in RU40 8.00
New in RU40 8.00
New in RU40 8.00
New in RU40 8.00
New in RU40 8.00

New in RU40 9.00
New in RU40 9.00
New in RU40 8.00
New in RU40 8.00
New in RU40 8.00
New in RU40 9.2
New in RU40 8.30
New in RU40 8.00
New in RU40 9.00
New in RU40 8.00
New in RU40 8.00
New in RU40 9.2
New in RU40 9.2
New in RU40 8.00
New in RU40 9.2
New in RU40 9.2
New in RU40 8.00
New in RU40 9.2
New in RU40 8.00
New in RU40 9.2
New in RU40 9.2
New in RU40 9.2
New in RU40 9.2
New in RU40 8.00
New in RU40 8.00
New in RU40 8.00
New in RU40 8.00
New in RU40 9.2
New in RU40 8.00
New in RU40 8.00
New in RU40 9.2
New in RU40 9.2
New in RU40 8.30
New in RU40 8.30
New in RU40 8.00
New in RU40 8.30

New in RU40 8.00
New in RU40 8.00

New in RU40 8.00
WANE Parameters
Abbreviated Name

AuthorisedNetworkId
Authorised Network PLMN - AuthorisedNetworkMCC
Authorised Network PLMN - AuthorisedNetworkMNC
Authorised Network PLMN - AuthorisedNetworkMNClength
Authorised Network PLMN - Technology
WANEName
O&M Parameters
WANEChangeOrigin
Authorised Network Identifier WANE HC

Authorised Network Mobile Country Code WANE HC
Authorised Network Mobile Network Code WANE HC
Authorised Network Mobile Network Code Length WANE HC
Technology used in the Authorised Network WANE HC
WANE Name WANE HC
Change origin WANE O&M

Parameter is used to identify a group of 1...10, step 1

authorised networks which are considered
The parameters Authorised Network Mobile Cou 0...999, step 1
equal to the home network of the subscriber.
The parameters Authorised Network Mobile Cou 0...999, step 1
The parameter defines whether 2 or 3 digits 2...3, step 1
are
Thisused in Authorised
parameter Network
indicates Mobile that i
the technology GSM (0), WCDMA (1), GSM and WCDMA (2)
Network Code.
This parameter can be used for identification 0...15 characters
of the authorised
When networks.
modifying this The maximum
parameter, also the
length
value of
of the
the name
MNC is
used15 ASCII
by the chars. Allowed
system is
The
charsparameter
(A-Z, a-z,defines
0-9). the origin of the last Not defined (0), Network originated configuration
always changed.
configuration action affecting the object. action (1), NetAct RNW plan originated
configuration action (2), Element Manager
originated configuration action (3), Configuration
action by automatic tuning function (4), Element
Manager originated mass config action (5), NetAct
Default Value Nokia Value o2 UK Value

2 Not applicable Not applicable

o2 UK Range for Optimisation Comments Classification
only applicable to IMSI based handover


Discrepancy - Discrepancy Checking
IPD PTY ID New in RU20
Criticality Frequency
New in RU50 EP1
WBTS Parameters
Abbreviated Name

HSDPA14MbpsPerUser
HSDPAIurWeight
HSDPAOperIdWeightPair - HSDPAOperatorId
HSDPAOperIdWeightPair - HSDPAOperatorWeight
HSDPAUserHysterisis
HSDPAUserThreshold
ICREnabled
PDUSize656WithHSDSCH
PtxDPCHmax
PtxDPCHmin
PWSMAVTrafficVERLogic
PWSMEnableWakeUpTime
R99OperIdWeightPair - R99OperatorId
R99OperIdWeightPair - R99OperatorWeight
RRMULDCHActivityFactor - RRMULDCHActivityFactorCSAMR
RRMULDCHActivityFactor - RRMULDCHActivityFactorCSNTData
RRMULDCHActivityFactor - RRMULDCHActivityFactorCSTData
RRMULDCHActivityFactor - RRMULDCHActivityFactorPSBackgr
RRMULDCHActivityFactor - RRMULDCHActivityFactorPSStream
RRMULDCHActivityFactor - RRMULDCHActivityFactorPSTHP1
RRMULDCHActivityFactor - RRMULDCHActivityFactorSRB
WinACRABsetupDL
WinACRABsetupUL
WinLCHSDPA
WinLCHSUPA
BlindHOIntraBTSQCheck
DediMeasRepPeriodCSdata
DediMeasRepPeriodPSdata
DedicatedMeasReportPeriod
MeasFiltCoeff
BTSFQDN
BTSIPAddress
NESWVersion
NEType
IntelligentSDPrioHO
PWSMInUse
PWSMRemCellSDBeginHour
PWSMRemCellSDBeginMin
PWSMRemCellSDEndHour
PWSMRemCellSDEndMin
PWSMShutdownBeginHour
PWSMShutdownBeginMin
PWSMShutdownEndHour
PWSMShutdownEndMin
PWSMWeekday
PrxAlpha
PrxMeasAveWindow
PtxAlpha
PtxMeasAveWindow
RACHloadIndicationPeriod
RRIndPeriod
O&M Parameters
AdminWBTSState
ATMInterfaceID
BTSAdditionalInfo
COCOId
DCNLinkStatus
DCNSecurityStatus
NodeBRABReconfigSupport
RFSharingState
TargetId
VCI
VPI
WBTSChangeOrigin
WBTSId
WBTSName
WBTSSWBuildId
BTSSupportForHSPACM
DLORLAveragingWindowSize
HARQRVConfiguration
HSUPAXUsersEnabled
LoadControlPeriodPS
MaxNumberEDCHLCG
PSAveragingWindowSize
PSRLAveragingWindowSize
PrxTargetPSAdjustPeriod
SchedulingPeriod
Telecom Parameters
BroadcastSIB15
BroadcastSIB15_2
BroadcastSIB15_3
DelayThresholdMax
DelayThresholdMax2msTTI
DelayThresholdMid
DelayThresholdMid2msTTI
DelayThresholdMin
DelayThresholdMin2msTTI
ProbabilityFactorMax
ProbabilityFactorMax2msTTI
HSDPACCEnabled
BTSFallbackEnabled
DSCPHigh
DSCPLow
DSCPMedDCH
DSCPMedHSPA
HSDPAULCToDSCP
HSUPACCEnabled
HSUPADLCToDSCP
InactCACThresholdATM
InactCACThresholdIP
InactUsersCIDThreshold
IPBasedRouteIdIub
IPBasedRouteIdIub2
IPBasedRouteIdIub3
IPBasedRouteIdIub4
IPNBId
IubTransportFallback
IubTransportMedia
IubTransportSharing
MaxFPDLFrameSizeIub
MDCBufferingTime
MinUDPPortIub
NbrOfOverbookedHSDPAUsers
OverbookingSwitch
ReleaseTimerForSharedHSDPAallocation
SatelliteIubUsage
SharedHSDPAallocation
SharedHSDPAVCCSelectionMethod
ToAWEOffsetNRTDCHIP
ToAWEOffsetRTDCHIP
ToAWSOffsetNRTDCHIP
ToAWSOffsetRTDCHIP
TQMId
TQMId2
TQMId3
TQMId4
HSDPA14MbpsPerUser WBTS AC
HSDPA Iur Weight WBTS AC
HSDPA Operator Identifier WBTS AC
HSDPA Operator Weight WBTS AC
HSDPA User Hysterisis WBTS AC
HSDPA User Threshold WBTS AC
ICR Enabled WBTS AC
Usage of RLC PDU size 656 with HS-DSCH WBTS AC
Absolute maximum downlink transmission power of a DPCH WBTS AC
Absolute minimum downlink transmission power of a DPCH WBTS AC
Traffic verification logic in PWSM cell activation process WBTS AC
Enable cell activation based on time of day WBTS AC
R99 Operator Identifier WBTS AC
R99 Operator Weight WBTS AC
Average UL DCH data rate for RBs of CS AMR WBTS AC
Average UL DCH data rate for RB of CS NT-data WBTS AC
Average UL DCH data rate for RB of CS T-data WBTS AC
Average UL DCH data rate for RB of PS background RAB WBTS AC
Average UL DCH data rate for RB of PS Streaming RAB WBTS AC
Average UL DCH data rate for RB of PS THP1 RAB WBTS AC
Average UL DCH data rate for SRB WBTS AC
DL measurement averaging window for AC WBTS AC
UL measurement averaging window for AC WBTS AC
PtxnonHSPA averaging window size for LC WBTS AC
Non E-DCH ST interference averaging window size for LC WBTS AC
Blind HO Intra BTS Quality Check WBTS HC

Dedicated Measurement Reporting Period CS data WBTS HC
Dedicated Measurement Reporting Period PS data WBTS HC
Dedicated Measurement Reporting Period WBTS HC
Measurement filter coefficient WBTS HC
BTS fully qualified domain name WBTS Identification

BTS O&M IP address WBTS Identification
NE-SW-Version WBTS Identification
NE-type WBTS Identification
Priorized Handover Type in Intelligent Shutdown WBTS Radio
The PWSM usage in BTS WBTS Radio
PWSM Shutdown Time Begin Hour for remaining cell WBTS Radio
PWSM Shutdown Time Begin Minute for remaining cell WBTS Radio
PWSM Shutdown Time End Hour for remaining cell WBTS Radio
PWSM Shutdown Time End Minute for remaining cell WBTS Radio
Hour when the cell shutdown window starts WBTS Radio
Minute when the cell shutdown window starts WBTS Radio
Hour when the cell shutdown window ends WBTS Radio
Minute when the cell shutdown window ends WBTS Radio
Weekend for shutdown WBTS Radio
Type of measurement filter for uplink total received power WBTS LC

Number of frames to be used averaging in PrxTotal measurement WBTS LC
Type of measurement filter for downlink total transmitted power WBTS LC
Number of frames to be used averaging in PtxTotal measurement WBTS LC
RACH load indication period WBTS LC
Radio Resource Indication Period WBTS LC
Admin WBTS State WBTS O&M

ATM interface identifier WBTS O&M
BTS Additional Information WBTS O&M
Connection Configuration Identifier WBTS O&M
O&M DCN link status WBTS O&M
O&M DCN secure link status WBTS O&M
NodeB PS RAB reconfiguration Support WBTS O&M
RF Sharing State WBTS O&M
Network Element Target Identifier WBTS O&M
Virtual Channel Identifier WBTS O&M
Virtual Path Identifier WBTS O&M
Change origin WBTS O&M
WBTS Identifier WBTS O&M
WCDMA BTS name WBTS O&M
WBTS SW build identifier WBTS O&M
BTS support for HSPA CM WBTS PS

Tx power of radio link averaging window size for DLO WBTS PS
HARQ RV Configuration WBTS PS
HSUPA x users enabled WBTS PS
PS load control period WBTS PS
Maximum number of E-DCHs in the local cell group WBTS PS
Load measurement averaging window size for packet scheduling WBTS PS
Tx power of radio link averaging window size for PS WBTS PS
PS target tune period in HSPA-DCH interference sharing WBTS PS
Scheduling period WBTS PS
Broadcast SIB15 WBTS Telecom

Broadcast SIB15.2 WBTS Telecom
Broadcast SIB15.3 WBTS Telecom
Maximum Threshold for HSUPA congestion handling delay WBTS Telecom
Maximum Threshold for HSUPA congestion delay 2msTTI WBTS Telecom
Middle Threshold value for HSUPA congestion delay WBTS Telecom
Middle Threshold for HSUPA congestion delay 2msTTI WBTS Telecom
Minimum Threshold value for HSUPA congestion delay WBTS Telecom
Minimum Threshold for HSUPA congestion delay 2msTTI WBTS Telecom
ProbabilityFactor for Congestion Indication sending WBTS Telecom
ProbabilityFactor for Congestion Indication sending WBTS Telecom
HSDPA Congestion Control activation WBTS Telecom
BTS Fallback enabled WBTS Transmission

DSCP high priority WBTS Transmission
DSCP Low priority WBTS Transmission
DSCP medium priority DCH WBTS Transmission
DSCP Medium priority HSPA WBTS Transmission
HSDPA UL FP Control traffic to DSCP mapping WBTS Transmission
HSUPA Congestion Control activation WBTS Transmission
HSUPA DL FP Control traffic to DSCP mapping WBTS Transmission
Inactive users CAC Threshold for ATM WBTS Transmission
Inactive users CAC Threshold for IP WBTS Transmission
Inactive users Connection ID Threshold WBTS Transmission
IP Based Route Id Iub WBTS Transmission
IP Based Route Id Iub 2 WBTS Transmission
IPNB object identifier WBTS Transmission
Iub Transport Fallback Mapping WBTS Transmission
Iub Transport Media Selection WBTS Transmission
Iub Transport Sharing activation WBTS Transmission
Maximum FP downlink frame size Iub WBTS Transmission
MDC Buffering Time WBTS Transmission
Minimum UDP port value for the Iub WBTS Transmission
Number of overbooked HSDPA users WBTS Transmission
Overbooking Switch WBTS Transmission
Release timer for shared HSDPA allocation WBTS Transmission
Satellite Iub Usage WBTS Transmission
Shared HSDPA AAL2 allocation WBTS Transmission
Shared HSDPA AAL2 VCC selection method WBTS Transmission
ToAWE Offset for NRT DCH connections over IP WBTS Transmission
ToAWE Offset for RT DCH connections over IP WBTS Transmission
ToAWS Offset for NRT DCH connections over IP WBTS Transmission
ToAWS Offset for RT DCH connections over IP WBTS Transmission
TQM object identifier WBTS Transmission
TQM Object Identifier 2 WBTS Transmission
This parameter defines the HSDPA percentage weight value for Iur users in case of the Inter Circle Roaming for HSDPA fe
The Iur weight indicates the percentage of the HSDPA resources that can be assigned to all Iur users for NRT bearers in th
These percentage weights are used when the number of HSDPA users in the scheduler exceeds the configured threshold.
The weight is divided among Iur users and all operators as follows:
Iur 10%
OP1 40% Description
OP2 30%
OP3 20%
Weight value range is between 0 and 100. The total sum of every operator's weight (HSDPA Operator Weight) and Iur weig
This parameter defines whether the feature HSDPA 14 Mbps per User is
If the weight value is 0 for Iur users and all operators, this means that there is no specific weight assigned for HSDPA and
enabled or not in the BTS.
If the weight value is 100 for one operator and 0 for all other operators, this means the operator with 100% weighting has f
Identifier
If this parameter of the operator is enabled for andHSDPA the capacity
code set split contains in case 15 of the Inter Circle
HS-PSDSCH codes
Roaming
This parameter defines the HSDPA percentage weight value host
(the code for
set HSDPA
is defined feature.
by the The operator
management could
parameter be either a
HSPDSCHCodeset),
for each operator operator who
owns
then the
RNC RAN or
restricts roaming
the maximum partners peak who
in case of the Inter Circle Roaming for HSDPA feature. The operator weight have
rate of entered
MAC-d into
flow an
to Inter
134400 Circlekbps.
This
Roaming parameter agreement defines with the thehysteresis
host for each cell handled in the BTS HSDPA s
operator.
indicates the percentage of the HSDPA resources that can be assigned to the
If thisparameter
This parameter
corresponding is disabled,
defines
operator the
for NRT thenbearers
HSDPA the userrestriction
amount
in the cell. of the maximum
threshold for each peak cellrate of
handled i
MAC-dpercentage
These flow depends on which
weights are features
used when arethe in use
number for the of BTS. users in the
HSDPA
This parameter defines whether the feature Inter Circle Roaming is enabled or
scheduler
not inparameter
the BTS. exceeds the configured threshold. Weight is divided among all
This
operators as follows:defines whether the use of RLC PDU size 656 in DL data
transfer
OP1 40% defines in
Parameter is allowed thethe BTS if the
maximum code RB channel
is mapped outputto the HS-DSCH
power for the in powerthe DL.
OP2
This
control 20%
parameter
dynamic defines
range ofthe BTS. traffic The verification
power logicdynamic
control in PWSMrange cell activationBTS is process
of power the of non-remaining cells.
Parameter defines
value the minimum code channel output power forbe the
OP3
When
difference20%the value
between of0 the
means
the parameter
maximum that the is RLC
and setthe PDU
to All
minimumsize 656
criteria, is
allnot
transmit to
criteria
output used
for in the
different
power of aRB types have to be fulfilled to attempt the ce
control dynamic range of BTS. The power control dynamic range of BTS is the
BTS.
Iur 20%
code channel. The maximum transmission power is transmit calculated by adding
difference between the maximum and the minimum output powerthe of a
Weight
value
This of value
the
parameter range
parameter
defines is between
to the
whether BTS 0 and 100.
maximum
a non-remaining The outputtotal
cell sum
power
that of every
(Pmax
was operator's
in
previously dBm). shut
code
Parameter channel. value Minimum1 means transmission
that the RLC power
PDU issizecalculated
656 should by adding
not be the
used value
in of
weight
down (HSDPA active
becomes Operator Weight) of
regardless and the Iurtraffic
user's when weight the (HSDPA
shutdown Iurtime
Weight) limit isthe
the parameter
BTS.orPDU size to the
656 is not BTS maximum
used output power (Pmax in dBm).
Identifier
100
ends. 0. of
The Ifendthe weight
the operator
of theserving value for
shutdown is 0when
R99 capacity
for
time all setting splitup
operators
limit
in the
is controlled andMAC-d
case of the
Iur
byPDUusers,
the
flow
inter incircle
this
following
the
means cell.
roamingIn
that
case
feature.
there of
is an
The
no incoming
operator
specific could
weight HS-DSCH
be
assigned either a
for cell
host
any change
operator
operator thewho
and owns
hence sizethe is RAN
HSDPA not or
This parameter defines the R99 percentage weight value for each operator in
parameters:
changed,
roaming
capacity andis656
partners
split canhave
who
considered be used to beindisabled
entered thisintocase.
aninICR agreement
thepercentage
BTS. If theof with
weight thevalue
host is 100
case
WBTS
The ofICR.
parameter The operator
PWSMShutdownEndHour,
defines the weight
average indicates
UL DCHthe data rate in relation SF256 to itsDL
operator.
for one
spreading operator
codes in theand 0 for all
cell that other operators,
can bedata assigned this means
to thethe the operator
corresponding with
operator
WBTS
maximum
Parameter PWSMShutdownEndMin
allocated
valuedefines transport
2 means that channel
the RLC PDU ratesize when656 can DCH
be is to
used transferring
in
100%
The
for R99 weighting
parameterusage. has
These full theHSDPA
percentage average capacity UL DCH
weights reserved
are data
used for
rate onlyitself
in during during
relation itsthe BTS.
congestion
congestion in
the
and RB
maximumhasofThe the
highest CSpriority.
allocated AMR RAB. channel data rate when the DCH is transferring
transport
the cell.
The parameter weight
defines is divided
the(HSDPA among
averagecell the
UL upg operators
DCHfrom data5 rate as follows:
HSDPA
the RB 15the
of codes feature
CS non-transparent datadata RAB. to 10incodesrelation ortoHSDPA
its cell
OP1
maximum 50% allocated transport channel rate when the DCH is transferring
upg
The from
parameter 10 to 15 codes license) is required
defines the average UL DCH data rate in relation to its to utilise the RLC PDU size 656
OP2RB
the 20% of the CS transparent data RAB.
for the HS-DSCH.
maximum allocated transport channel
OP3parameter
The 30% defines the average ULdataDCHrate data whenratethe DCH is to
in relation transferring
its
the
The RB
maximumweight of the PS
value
allocated background
range
transportis between RAB.
channel 0 and
data 100.rate The
when total the sum DCH of isevery
transferring
The parameter defines the average UL DCH data rate in relation to its
operator's
the RB of the weight (R99 Operator
PS streaming RAB. Weight)
The data is 100 oris0.also
parameter If the used weight valuethe is 0 for
maximum
The parameter allocateddefines transport
the channel
average rate whenratethe DCHtoisdefine transferring
all operators,
average UL this
E-DCH means
data that
rate there
in relationisUL noDCH
tospecific
the data weight
guaranteed inassigned
relation
bit rate to itsanythe E-
for
when
the RB of the
maximum PS interactive
allocated transport RAB.channel Thedata trafficrate handling
when priority of the RAB must
operator
DCH
Theequal
be
and
is transferring
parameter to 1.
hence
defines ICRthe
the RB R99 of Capacity
averagethe PSUL split
DCHisdata
streaming RAB.ratethe
considered DCH
to
in relationbe is transferring
disabled
to its in the
the
BTS. RB
maximum of the
If the PS interactive
weight
allocated value
transport is 100 RAB. for The
channel onedata traffic
operator handling
rate and 0 the
when priority
for allDCH ofisthe
other RAB must
operators,
transferring
Theequal
be
this parameter
means to 2.
that defines
the the average
operator with 100% UL DCH weightaing data rate
has inallrelation
the SF256to itscodes in
the RB of the
maximum PS interactive
allocated RAB. The trafficrate handling priority ofisthe RAB must
the
This
be cell reserved
parameter
equal to 3. for transport
determinesR99 usage the channel
duringdata
downlink congestion.
load measurementwhen the DCH averaging transferring
window
the
size SRBs.
This parameter determines the uplink load measurement averaging window is
in number of the scheduling periods for admission control. This window
used
size ininnumber
averaging of thescheduling
the estimated transmitted periods carrier power
for admission sample
control. This values
window for is the
This
admissionparameter decision defines in thethedownlink
averaging DCH window
resource sizeallocation.
for the estimated
The slidingtransmitted
type
used
non in averaging
HSPA carrier the estimated
power. The windowreceived size wide
isthe
used band for power
averaging sample the values
estimated for
window
Thisadmission
the is used:
parameter the
defines
decision oldestthe
in sample
theaveraging
uplink value
DCH of
window resource carrier
size for power
the
allocation. isThe
estimated removed received
sliding when
type
Transmitted
a new one
interference iscarrier
drawn.
power power
of the cell of all codes not
excluding used for HS-PDSCH, HS-SCCH, E-
window
AGCH, is used:
E-RGCH the
or oldest
E-HICH sample
transmission valuethe of received
the
(PtxNonHSPA) received E-DCH wide
in
Scheduled
the band
downlinkpowerDCH is
Transmission
removed when (ST)
a newcode one powers.
is drawn. The window size is defined in the number of
overload
This parameter
the scheduling control. The window
defines
periods. ifThethewindow size is is
inter-frequency defined
used in in
blind thehandover
CRNC number ofcan
for averaging thebe scheduling
done
the
periods.
without Arithmetic
quality check mean between valuetwo of
STthe sampleslayers
frequency ispower
calculated. The sliding type
estimated
This
window parameter
is
received
used: the
non
determinesoldest
E-DCH the reporting
sample
interference
value interval
of the thatinside
estimated the forNode one
the
power
BTS
uplink
Bisshould ifoverload
removed use
frequencies
controlsending
when in the BTS are in
dedicatedsame
cell. The frequency band
sliding type reports
measurement and
windowto the source
is the
used: RNC. and target
the oldest sample cells are in
when
This
same a
valueparameter new
sector.
of one
However,
the estomated is drawn.
determines note the
interferencethatreporting
blind interval
handover
power is removed that Node
target cell must
when Bashould
new be one useiswhen
defined for
sending
the
drawn.source dedicated
cell.
Arithmetic measurement
mean value of reports
the
This parameter determines the reporting interval that Node B should use (by samples to theis RNC.
calculated.
default,
This parameter when initialised)
indicatesto how send dedicated measurement
measurement values shouldreports be filtered to the RNC.the
before
This parameter determines also the
measurement event evaluation and the reporting of dedicated measurement reporting interval when Fractional DPCH
(F-DPCH)
results in aisNode allocated. B.
This parameter specifies the BTS FQDN that is needed to establish certain
NOTE!
TCP/IP
A high When
value ofmodified
connections this automatic
to the
parameter BTS. COCO connect/disconnect
emphasises an old filtered is done, all cells
This
need parameter
to be locked specifies
for the
operation BTS to O&M
succeed. IP address that is measurement
received whenresult the
This parameter
(for example, specifies
with value the main release version of the WBTS as the WN 96%release or the WL release. WL is valid for the F
BTS O&M connection is 9, the weightby
established ofthean BTS. old filtered
The value measurement
of the realisBTS IP
This
and information
the weight of isareceived
new from the BTS
measurement is when BTS O&M connection is established.
5%).
address is not necessary because for FlexiBTS the connection is established
This parameter specifies
by transmission module. the BTS model in the WCDMA. The NE type is
A low
reported value to of
the
The value of the parameters this
RNC parameter
Mediatorisemphasises from
usedthe forBTS a with
new the
establishing measurement
BTSTCP/IP
the result
O&M interface.connection (for It isto
example,
used
the BTS in NetAct
bywith value
otherto NEs 1, for
direct theitsO&M weight
operations of a concerning
purposes, newe.g. measurement
in casesecurity result
management,
of launching is 71%).
BTS Site for
example.
Manager remotely. The NE type is included in the topology information for the NetAct.
With value 0, old measurements are not considered.
The default value is 5, which means that the weight of an old filtered
measurement is 82% and the weight of a new measurement is 18%. With the
This parameter defines the priorized forced handover type in block resource
request
The usewith normal
of Power priority
Saving (i.e. intelligent
Mode for BTS shouldshutdown of BTS). in
be controlled According to By
BTS level.
parameter
this value
parameter (IFHO
the Power or ISHO) either the inter-frequency or inter-system
This parameter
handover shall defines
be theSaving
attempted starting Mode (PWSM)
first in hour
feature can
for celltriggered
handovers shutdown due
be setinON
window and
to block Power
resource
OFF
Savingon BTS
Mode basis.
(PWSM) for
request with normal
This parameter defines theremaining
priority.starting cell. handover
The priorized
minute is valid inwindow
for cell shutdown handovers during
in Power
CPICH
Saving power ramp
Mode (PWSM) down and in forced handovers after CPICH power ramp-
This
down. parameter definesfor
theremaining
ending hour cell.for the cell shutdown window in Power
Saving Mode (PWSM)
This parameter definesfor
thethe remaining
ending minute cell.
for the cell shutdown window in
Power
This parameter defines the starting hour for cell cell.
Saving Mode (PWSM) for the remaining shutdown window in Power
Saving Mode (PWSM).
This parameter defines the starting minute for cell shutdown window in Power
Saving Mode (PWSM).
This parameter defines the ending hour for cell shutdown window in Power
Saving Mode (PWSM).
This parameter defines the ending minute for cell shutdown window in Power
Saving Mode (PWSM).
This parameter defines the days on which the remaining cells should be shut
down at weekend.
PrxAlpha defines the type of measurement filter used for the total received
wideband powerdefines
The parameter (PrxTotal) in a cell.of frames used for long term averaging at
the number
the BS of defines
PtxAlpha the short thetermtype (frame
of window based) averagesfor
measurement of the
PrxTotal
total measurements.
If the value is 0, pure sliding mean filter is used and transmitted
if the value is power
0.5,
(PtxTotal)
sliding in
window a cell.
median filter is used. If
The parameter defines the number of frames used for long term averaging atthe value is between 0 - 0.5, trimmed
mean
the BSfilter is used.
of short term averages of the PtxTotal
This
If theparameter
value is 0,defines pure sliding the reporting
window mean periodfilter ofmeasurements.
the PRACHs
is used and in a BTS.
if the value The BTS
is 0.5,
may
sliding report
window load figures
median to
filterthe is RNC
used. inIf
The parameter defines the reporting period of Radio Resource Indication every
the Nth
value (N=1-20)
is between Radio
0 - Resource
0.5, trimmed
Indication,
mean
messages, filter Nokia
is
whichused. private
are used message.
for cell-based Value 0load means that the BTS does not report
measurements.
the load information for RACH.
WithRadio
The this parameter
ResourceitIndication is possiblefunction to change the administrative
is implemented by using state of the all
a Nokia
WCELs
private under
message the WBTS.
mechanism The in parameter
the CRNC
The C-NBAP ATM interface identifier of the related COCO object. C-NBAP can
and bethe used
Node onlyB. with
The Direct
private
Activation
message
VCCs ATM operations
mechanism
interface started
is VPI
id, 3GPP from NetAct.
specified NBAP protocol extension, which allows
The
the parameter
implementation can of freely
private,beand used VCI
vendor forforms
defining
specific
a unique reference
any additional
functions of
to the
numeric
NBAP. The
COCO
or text
private
object.
format WBTS-ATMInterfaceID,
information related to WBTS-VPI, WBTS-VPI -triplet is visible Thefor the
message
This
user mechanism
parameter
only for identifies
informative is to bethe
the
reasons. used BTS
Connection in object
parallel (WBTS)
with theinbasic
Configuration the RNW
object for data.
functionsthe Iubspecified
maximum
in 3GPP NBAP.
interface inlength
the RNW of the field is 20
database of ASCII
the RNC. characters.
TheofCOCO identifier
Online information about the operational status the O&M DCN is linkused as a
for the
reference
WBTS. to the
The disabled COCO state object containing
indicates the
that theabout Iub link
BTS has securityconfiguration
not established for the
This
A BTS
WBTS. parameter
informs the contains
RNC about online information
the current load at the radio interface ofthe
status from O&M
thethe
link
O&M or that the
DCN link point link
for is not
theofWBTS. available Thethe (for
secure examplestate due
indicatesto a transmission
that the BTS failure).
has that
radio resource
This parameter view, and
enables/disables the load
use of of every
PS RAB RACH in each
Reconfiguration cell.feature.
For
established
purpose,
At the Iubthe aBTS
protected
interface sends O&M
the signaling link.link aand
periodically 'Radio Resource
the user plane Indication' to the RNC.
link layer resource
This
The
creationparameter
RNC sends
and isthe
removal only isinenabled
reporting RN6.0
triggered 2.0.This
parameters
viasystem
adding parameter
to checks
theremoving
or BTS. indicates
These theBTS the BTSs
parameters
relation role
betweenare in
When
an RF this
Sharingparameter is
Configuration. When the RF Sharing is that
used the
in the supports
BTS, the the
system
'Radio
the
The WBTS resource
and
Target Id isof
reconfiguration indication
COCO
reported
PS object. reporting
The period'
relation
to the RNC Mediator from and
between 'RACH the load
COCO indication
and
BTS with the BTS O&M the period'.
WBTS
module
is removed
interface. being
The with used
parameter forRAB.
setting the
the is WCDMA
WBTS-COCOId
unique may
for each be BTS Master
to notand orisSlave
defined used as
value. indicated
inATM
the NetAct byforthis
The C-NBAP
parameter.
In thethe Radio If VCI
RF
Resource of the
Sharing related
is not
Indication COCO
in use
message, object.
then the
the C-NBAP
value
BTS of VCCs
this
reports The parameter
periodicallyinterface
is Off. id,
tying
VPI and Licences
VCI forms for
a the
unique NEreference
to the physical
to the NE
COCO equipment.
object. WBTS- Target idthe is
The
If theC-NBAP
total
includeduplink
WBTS theisVPI
in interference
not value
connected
topology of
powerthe to
informationrelated
ofathe COCO,
for COCO
cells,
the the
the object. C-NBAP
total transmitted
modification
NetAct. VCCs
of the power ATM
COCOId of the of
ATMInterfaceID,
interface
cell, and id,
the VPI
RACH WBTS-VPI,
and VCI
load. forms WBTS-VPI
a unique -triplet
reference is visible
to the for the user
COCO onlyWBTS-
object. for
the WBTS
The parameter does not require locking of WCELs.
defines the origin of the last configuration action affecting the
informative
ATMInterfaceID, reasons. WBTS-VPI, WBTS-VPI -triplet is visible for the user only for
object.
This parameter
parameter
informative
The reasons.specifies
is significant theforidentification
the BTS, which of theisrelated
applying WBTS.the NokiaThis value
privateis j
The
NBAP parameter
Radio Resource enables indication
HSDPA orfunction. HSPA compressed mode in the BTS. If HSDPA or HSPA CM is enabled, the RNC can s
This
The DCH, HSDPA or HSPA compressed mode can be utilised only when B).
parameter can be used for identification of the WCDMA BTS (Node the RNC configuration parameter CMmasterSwitc
The
This maximum
HSDPA and HSPA
parameter length CMofare
indicates thethe name
supported
BTS SW is 80 for ASCII chars.information.
inter-frequency
build version handovers RNC (RAN1276)
gets the and for LTE mobility features (RAN2980, R
HSDPA
parameter compressed
value frommode BTS NE. measurements require the value 1 (HSDPA CM supported). The value 1 activates HSDPA CM
HSPA compressed mode measurements require the value 2 (HSPA CM supported). The value 2 activates HSPA CM for IF
If theparameter
This CM is not determinessupported for thethe allocatednumber
maximum transport channelallocations
of E-DCH configuration, in the such a specific
BTS transportlocal
channel configuration
cell group where
(including serviC
This parameter defines the use of transmitted code power of radio link
Notice
averaging thatineven
RNCif for
thisdynamic
parameterlinkdoes not restrict
optimisation the user amount, then the restriction is done according of the active cap
functionality.
-This parameter defines the HARQ method that is to be used in the virtual BTS
HSUPAXUsersEnabled
-The
This HSPA72UsersPerCell
parameter defines
parameter defines howwhether
many HSUPA
measured3, 12, 24, or
radio link60specific
Users average
per BTS is
-enabledHSPA128UsersPerCell.
transmission or not.
powers of the
This parameter defines the DPDCH
period how bitsoften
(Ptx_average)
PS can perform are included in the
load control
sliding
actionsmeasurement
in a certain cell. window. Averaged Ptx_average in RNC is used in
Also
If
dynamic thisthe resource
parameter issituation of the BTS can
set to: functionality.
link optimisation restrict
Dynamic linkthe user amount.
optimization Thus, the is
functionality maximum number of E-DCH allocations in th
-triggered
This 'notparameter
enabled', then
if the sum HSUPA
of users
the averaged
determines the are
uplink not allowed
Ptx_average
and downlink ininload
the measurement
RNC BTS.
and the value of the
-averaging
'3 users enabled',
DLOptimisationPwrOffset then in
window sizes RNC allows
parameter
number up
thetoscheduling
ofexceeds 3 HSUPA
the maximumusers
periodsinDL
thetransmission
for BTS.
packet
-scheduling.
'12
power. users enabled',
This window is used in averaging the estimated receivedBTS.
then RNC allows up to 12 HSUPA users in the wide
-power
'24 users
sample valuesthen
enabled', and RNC allowstransmitted
estimated up to 24 HSUPA
carrier users
powerinvalues
the BTS.
for packet
-The
'60 special
users enabled',
scheduling value
of then
0 means
the NRT DCHRNC
that allows up to 60
this parameter
resources. The HSUPA
does
sliding notusers
type affectinmeasurement
window the BTS.the
is used:
averaging
oldest samplein RNC.
value of the estimated power is removed when a new one is
NOTE:
drawn. If the local cell group concept is used it defines how many HSUPA users
are allowed per a local cell group. RNC receives the local cell group information
from the Node B when it is used: that is information included in NBAP:
This parameter defines the use of transmitted code power of radio link
averaging in RNC
The parameter for packet
defines scheduling
the period functionality.
- in terms of received total interference power
reporting
This intervals
parameter - for the
defines the adjustment
period of the of resource
the targetallocation
thresholdfor forthetheresource
UL PS
The
NRT parameter
DCH resourcedefines how
allocation many
when radio
one link
or specific
more E-DCHaverage MAC-d transmission
flows have
requestsofofthe
powers theDPDCH
PS interactive
bits are and background
included services.
in the sliding measurement window that
been
The set
PS to up in
interactivethe cell.
and The target
background level represents
service resource total non-EDPCH
requests, which
is used
interference estimate
power; the
it ispower
applied change
when in case
the of an NRT
interference DCH bit
is shared rate result
upgrade
dynamically
in
This
the
or in parameter
allocation
case of a isa used
ofNRT DCH DCH for
in activating
either
bit rate of the and
downgrade twodeactivating
transfer
due to the
directions,
load broadcast
control. are of SIB15.
processed
between,
each on one period.
scheduling hand, the NRT
If the HSPADCH/DCH channels users, and on the
are selected onlyother hand, the
for the
This parameter
hs-DSCH/DCH enables
and the
hs-DSCH/E-DCHuser to activate
users. Broadcasting
Conditions to of SIB15.2.
adjust the To be
target
resource
The
able special
to request,
activatevalue then
0 means
Broadcasting the MAC-d
that
of this flows
SIB15.2, are
parameter alsoestablished
does not
Broadcasting without
affectof waiting
measurement
SIB15 for be
must the
level
This
next are checked
parameter
scheduling every the
enables
moment. nth user
received measurement
to activate report of
Broadcasting from the BTS,
SIB15.3. where
To be
result averaging
activated.
n in the RNC.
AllisRT
able
This
defined
totype
activate
parameter
with
of this parameter.
Broadcasting
resource
defines requests of SIB15.3,
the Maximum are handled alsowithout
Threshold Broadcasting
valuewaiting
for HSUPAof
forSIB15
the must be
next
congestion
activated.
scheduling
handling in moment.
a delay case.
The parameter defines theIf Maximum
there is delay >= DelayThresholdMax
Threshold value for HSUPA value, TNL
congestion
CONGESTION
handling in delay INDICATION
case with control frame
2ms TTI. threshold reactive
If there is value flag
delay for is
>= HSUPA always sent.
DelayThresholdMax
This parameter defines the midpoint congestion
value,
handling TNL in CONGESTION
an Iub delay INDICATION
case. If there is control
delay >=frame reactive
DelayThresholdMid flag is always
value and
The
sent. parameter defines the midpoint threshold value for HSUPA congestion
delay
handling < DelayThresholdMax
in Iub delay case value, FP E-DCH entity executes the Delay
This parameter
Congestion defines
Algorithm thefor
which
2ms TTI.
minimum
determines
If there value
threshold
whether
is delay for>=
Congestion
DelayThresholdMid
HSUPA congestion
Indication isthe
sent
value
handling and in delay
an Iub< DelayThresholdMax
delay case. If there isvalue,
delay FP
>= E-DCH entity
DelayThresholdMin executes value and
to
The the
Delay BTS
parameter or
Congestion not (proactive
defines the or reactive
minimum
Algorithm value, which FP flag
threshold
determines can either
value
whether be
for set
HSUPA to
Congestion the TNL
congestion
Indication is
delay <
CONGESTION
handling DelayThresholdMid
in BTS INDICATION
Iub delay control E-DCH
frame). entity executes the Delay
sent
This to the
parameter
Congestion or notcase
defines
Algorithm thewith
(proactive
which
2ms
maximum
determines
TTI.
or reactive If there
probabilityflag is
whether can
of delay
either
Congestion
Congestion
>=be DelayThresholdMin
set to theisTNL
Indication
Indication sent
value
sending and
CONGESTION at delay
the < DelayThresholdMid
INDICATION
maximum allowedcontrolIub value,
frame).
delay FP E-DCH
variation amount.entity executes the
to the Node
The parameter
Delay CongestionB or not
defines (proactive
Algorithmthe maximum flag is
which determines set to the TNL CONGESTION
probability of Congestion Indication
This parameter
INDICATION enables
control the HSDPA
frame). Congestionwhether ControlCongestion
for selectedIndication
BTSs. If theis parameter value is set to Enabled, the HS
sending
sent to at the
the Node maximum
B or not allowed
(proactive Iubflagdelay is variation
set to the amount
TNL with 2msTTI.
CONGESTION
In case the HSPA QoS Aware scheduling is activated for any of the cells of the BTS then Iub Transport QoS license is requ
INDICATION control frame).
The BTS Fallback Enabled control parameter defines whether the HSPA
Transport Fallbackservices
The differentiated feature should be used
code point or not
(DSCP, for the considered
RFC2574) that is usedBTS.
for the
common
The channelsservices
differentiated and real-time R99 DCH (UMTS traffic classes:
Transport
Conversational, Fallback Mappingcode
Streaming). The
point
(IubTransportFallback),
DSCP
(DSCP,
is applied
RFC2574)
at Fallback
the
that is
transport forusedDCH
bearer
forQoS non-
setup
real-time
Priority
The xx HSPA
differentiated Mapping traffic
services (HS-DSCH
(FallbackForHSPAQoSXX)
code and
point E-DCH,
(DSCP, UMTS
and
RFC2574) Traffic classes:
(FallbackForDCHQoSXX)
that ispacket
used for the
with
Interactive, the IP transport
Background). option and
Thetraffic the
DSCPclasses: DSCPis applied value atis used for IP marking
are
NRT
and used
R99 when
DCH BTS
traffic Fallback
(UMTS control parameter is the
Interactive, enabled. transport
Background). bearer The setup
The to
with theisdefine
differentiated
IP the
transport Per-Hop-Behaviour.
services
option code
and the point DSCP (DSCP, value RFC2574)
is used that
for IPispacket used for the PS
marking
DSCP
domain applied
Streaming at the
class transport
traffic on bearer
HS-DSCH setup and with the
E-DCH. IP transport
The DSCP option
is and
applied
and
The
the to
DSCP
DSCP define for
value the
the isPer-Hop-Behaviour.
HSDPA
used for ULIP Frame
packet Protocol
marking Control
and to direction
define the traffic.
Per-Hop-
Forthe
at thetransport
commonbearer channels setup thewith modifiedthe IPDSCP transport value option is taken and into the DSCP use after value theis
Behaviour.
next
This
used WCEL
parameter
for IP operational
packet enablesmarking state
the and lock/unlock
HSUPA to Congestion
define operation.
the Control
Per-Hop-Behaviour. for applicable E-DCH
This value is used with basic IP based Iub and Dual Iub feature configuration.
bearers
The DSCP regardless
values
for the HSUPA areof the TTI
retrieved DL value. fromIfthe
Frame theTQM
Protocol parameter object
Control value
definitions
direction is set to Enabled,
once
traffic. the TQM
This
the
This value
HSUPA
value is used
iscongestion
used with
with basic
controlIP
basic IP isbased
activated.
based Iub and
Iub feature When
and Dual
Dual isIub
Iub setfeature
itconfiguration. to Disabled,
feature configuration.
The DSCP
configuration. there will
object
The DSCPis relatedvalues to the
are WBTS
retrieved withfrom Iub the Transport
TQM QoS
object feature.
definitions once the
Parameter
values
not be are
any defines
retrieved
HSUPA the from threshold
congestion the
The DSCP values are retrieved from the TQM object definitions once the TQM of
control the
object transport
handling definitions in CACthe once(Connection
RNC thefor TQM
the Access
BTSobject in TQMis
TQM
object
Control)
related
concern.
object is
isto related
resources
Ifthe
related WBTS
parameter to
to the
for
the withWBTS
the
is
WBTS modified with
preventive
Iub Transport
with Iub
online
Iub Transport
overload
QoS
it
Transport will feature.
not QoS
control.
QoShave feature.
When
effect
feature. filling
on the ratio
existing(i.e.
Parameter
Traffic typesdefines allocated to threshold
the DSCP of the low transport
priority value: CAC (Connection Access
available
bearers
Control) butfree
resourcesnew CAC value resources)
for will
the for the
beBackground
taken
preventive into CAC
overloadaccount transport for the
control. resources
new(HS-DSCH
When goes
establishments.
filling ratiounder (i.e.or
-Parameter
PS domain Interactive
defines the and
threshold ofthisthe class
transport HSPACID traffic
(Connection ID) and
resources E-
equals
Traffic
Traffic
available the
types
types freethreshold
allocated
allocated
CAC defined
to the
to the DSCP
resources) with
DSCP for the high
high parameter
CAC DSCP
DSCP transport and
value: the Continuous
value:resources goes under or Packet
DCH)
-for the preventive overload control. When filling ratioby (i.e. number ofconfigured
available
- PS
Connectivity
HSUPA
The
equals Common domain
HSIPBasedRouteIdIub
PS domain
FACH the
Interactive
feature
channels
Congestion Streaming
threshold
/ RACH
is
Control
defined
(user
and
enabled,
refers
class data)
Background
topreventing
functionality
traffic
with the
this onlogical isclass
HS-DSCH
parameter IP traffic
overload
enabled Based
and
on
andcontrol
the
R99
default
Route
E-DCHContinuous
DCH
isentity
started
for
(HSPA) the by that
BTSs
Packet
CIDs)
releasing for the
inactive CID transport
users MAC-d resources flows goes
and/or under
SRBs or and equalsmoving the threshold
them from
-in
has HS
Connectivity
The
defined
FACH
HSUPA
theIPBasedRouteIdIub2
IP layerfeature
with
/ RACH
activated
this
with MML (signalling)
parameter
cells.orrefers
is enabled, via IPpreventing
andisthe toPlan interface.
aContinuous
second overload
logical TheIP
Packet
IPBased
Based
control isRoute
Connectivity
Routeentity
started by the
feature is
Cell_DCH
-releasing
DCCH
configured on state.
R99
for
inactive the DCH Iub
users (SRB)
interface
MAC-d flowsused for
and/or the SRBs user plane
and moving connections them towards
from the
configured
enabled,
-Cell_DCH
The CS domain
IPBasedRouteIdIubin
preventingthe
trafficQoSIP onlayer
overload
R99 with
DCH
refers MML
control
tounit or
the and is viastarted
logical IP Plan by
IPselection interface.
releasing
Basedfor Route The
inactive IP Based
users
In
the case
BTS the HSPA
controlling the Aware
interface scheduling is activated any entityof thethe configured
cells of theIP
Route
MAC-d
-address
in PS
the 2flows
domain
IP layer
state.
configured and/or
Streaming
with for
MML SRBs the
class
or Iub
and
IP interface
moving
traffic
Plan on
interface. isport
them
R99 used from
DCHThe only IP for along
Cell_DCH
Based the Routeuser with
state plane
configured
source
for
BTS then and
The IPBasedRouteIdIub Iub Transport
UDP port QoS
selection.
refers license This
to the logicalis required
parameter IP for
is
Based unitactivating
applied Route when the
entity HSUPA
the IP
configured over
connections
the IubIPinterface towards is option
used the for BTS controlling
thePlan the interface and port selection
congestion
Ethernet
in the control.
transport
layer with In respect
MML or is used.
IP ofuser plane
theinterface.
parameter connections
The values
IP Based towards
and licenses
Route the itBTS
means for
configured
along
The
controlling with identification
IPNB the
the source
interface IPgivesaddress
unit andtheport andselection
reference UDP port to the selection.
along IPNB with Thissource
object
the parameter
used forIP the is
address
that
the whenever
Iub interface both isIP WCEL-HSPAQoSEnabled
used for the user plane and
connections WBTS-HSUPACCEnabled
towards the BTS
applied
WBTS.
and UDP when
The port IPNBthe object
selection. over Ethernet
contains
This parameter transport
the NBAP is appliedoption
link is
configuration
when used. the for the WBTS
are
This activated
parameter
controlling
with the IP the
based
at the same
defines
interface
Iub
the
unit
interface.
time and forport
user-plane theselection
given
traffic BTStypesalongthe that license
with needtheIP to over
combination Ethernet
be protected
source IP address in
transport
HSDPA
case
and of a option
Congestion
fallback is used. Control
scenario: if(optional)
the bit AND
related QoS
to Aware
traffic class HSPA is set Scheduling
to 0, this traffic
The UDP Iub
parameter port
control selection.
plane
indicates This
connections parameter
the transport have is
to
media used applied
be configured when the
for
for the user plane IP
the over
WBTS Ethernet
(optional)
class
transport should AND
option notIub isbe Transport
protected
used. QoS
during (optional)
fallback; isif required.
set to 1, ittype should be protected.
IPBasedRouteIdIub.
connections
The
With NBAP
Iub Transport with
definitions air interface
Solutionalong for channel
with other
Network type,
IubSharing radio
links are bearer
feature configured operator (Signalling
in themayCOCO Radio
define
This attribute
parameter enables
is applied or disables
when the the DualIub Iub Transportfeature Sharing
is also functionality
activated for for
the the
Bearer,
object
additional
given BTS. RAB)
withIP ATM and
Based
With Iub
Iubthe RouteUMTS
transport.
Transport traffic
Either
referencesSolution class
IPNB
for for based
useror COCO
Network selection
plane traffic.
Sharing method.
object With can
feature be In case
related
different
operator IPof
to IP
With
The
based Iub
user Iub Transport
plane
only frame
the Solution
value size"IP canfor
Iub" Network
beislimitedpossible Sharing
withand feature
thiswith parameter Dual operator may
ininterface
order to avoid define
the
Based
may WBTS.
additional Route
define IP PLMNidentifiers
Based id specific
Route user plane
transport
references bearers resource
for user with certain
and
plane CNIub
transport
traffic. PLMN
With priority id can
different
thebe
allocation.
IP
IP
user
This layerplane fragmentation.
parameter connections
defines The
carried RNC
for resource
how over
longtakes the
R99 theIP value
transport
traffic into
is buffered canaccountbe at
controlled
intypeMDC DL (MacroPlane
User with
assigned
PLMN
The
Based id
definition
Route to
specificspecific
is done
identifiers transport
transport according
user resource.
plane to theindex
bearers air is defined
interface
with certain with
channel CN IUO PLMN - (DCH,
id can be
traffic
other
Diversity processing
values. Combining) and
In each when limits
transport the
Satellite maximum
bearer setup, HS-DSCHthe RNC FP frame
selects size accordingly.
either ATM or IP =
IubTransportSharingInd
HSDPA,
This
The
assigned
transport parameter
minimum
value HSUPA),
tohas
media specific forberadio
todefines
UDP port
transport
planned
the
parameter.
ifbearer
the
number
new RAN1096 thatIub
type
resource.
according
transport (Signaling
can isbe
to
bearer
enabled
Transport
the Radio
allocated
minimum
based
(WBTS
Bearer
on Bearer,
atthe
IP
- SatelliteIubUsage
Tuning
common
layer
bitmask RAB), feature
MTU and
channel along
values. UMTS
is oractivated
the
With for scaling the Iub transport bearers lo
1).
Note:
If the
call The
traffic The required
class
switch
setup first
for based
istheIP buffering
turnedBased
selection
transport on, time
Route
the
bearer RNWdepends
method:identifier
at database
the on
(WBTS
Iub the jitter
-
Activity
interface. that
IPBasedRouteId)
Factors
The the UDP satellite
are used
port link
isrelated
selected
for scaling
to the transport layer logical reservations a
path
Dual
The to
Iub the
parameter
introduces. theBTS. Control Theplane,
defines IPthe andallowed
UDP header
Common channel,
number overheads
ofor basic
MAC-d have
Signalling
flows toon bea subtracted
Radio
VCC if the from
bearer on
for
Once
the
Note: the
RNC setup
the
The activity
source
first whenIP UDP
Basedtheport
factor PLMN
or the
Routeis id
assigned is not
feature
identifier known
activation
by the
(WBTS system when
parameter
- the referred
having
IPBasedRouteId) valuethe is
value IPis Based
changed,selected
selected the new value is taken into use for the newly
R99
shared
When IP DCHinterface
HSDPA
Satellite are always MTU
AAL2
Iub isthe value
carried
allocation
disabled, (e.g.onthe IPv4
the
has ATM IP header
failed.
buffering path. the 20
Iftime of bytes,
size 15isms UDP
modified
in MDC header
online,
is used, 8itbytes)
is
Route
In
for case
above the Id
theofattribute
setup Dual
specified
when Iub, has the unspecified
minimum following
PLMN UDP
id is value.
traffic
port
not classes
number.
known or are
when available:
the referred IP Based
when
taken
regardless adjusting
into use of this the
next value since
time the allocation
parameter value.the parameter
is set up. directly controls the user plane
Bit
If all0frame
Route
FP
The NRT
of Id
parameter
the DCH,
attribute
size.
values Bithas
definesare 2 NRT the HSPA
unspecified
zero, release
then the value.
timer
traffic foristhe carriedshared on HSDPA
top of the allocation
ATM. in
The
Part
minutes.
Bit modified
of the
value This
0 BTS
meansvalue
timervariants willstarted
is
that be
the applied
cannot when
correspondinghandleforthe the bigger
last new MAC-d
traffic transport
than
type 1428
flow is bearers
FP frames.
from
carried a andATM.
certain
over the
RNCroute is
This
In case
already parameter
of Dual
admitted defines
Iub and
connections whether
HSUPA are 2thems
not Satellite
TTI
modified. or Iub featureDPCH
Fractional is enabled (SRB or
ondisabled
HSPA)
keeps
removed.
Bit value the 1 maximum
If no
means transportthat FPthe frame
is set size
up
corresponding for always
the new limited
traffic MAC-dtype to 1428 users
is and
carried on additionally
that
over route
IP. before
for
and the BTS. If the
Streaming QoS feature
for HSPA, is enabled,the the additional
following traffic delay which
classes are the satellite
available:
obeys
the timer parameter
expires, values
the configured
allocation is to lower than 1428.
released.
links
Bit 0 cause
NRT DCH, is taken 1into RTaccount.
To enable the IP Bit transport, HSPA,
the followingBit 2 NRT HSPA,are
licenses Bit required:
3 SRB HSPA
If
IP the
When Based size
Satellite is modified
Iub: online, it an is taken into use next time the shared HSDPA
The SRB
allocation
Bit 0, IP Iub,on
is theIub
set
only HSPA
up.
is enabled,
possible fallbackvalue
additional
attribute
once the controls
NBAP
offset theforwhole
links
ToAWS
are SRB is added
configured trafficonthat on top
topisof
of
the basic
carried on ToAWS
top of value
the IP due to
path in the
the additional
Dual Iub jitter that the satellite
configuration. For the link causes.
SRB on
IP
The with IPNB object.
following parameters are taken
HSPA, the associated downlink R99into DCH account
is also in the connection
subject to fallbacksetup: to ATM with
Dual
Dual Iub if the associated DL DCH
Iub:- ToAWSOffsetNRTDCHIP (ToAWS Offset for NRT DCH connections is carried on the IP path (DCCH DL/UL: R99
WBTS
This ATM protocol level parameter defines the amount of Iub bandwidth on a
VCC allocated for
The parameter HSDPA
defines howtraffic only. selection
the VCC If the sizeisisdone
modified
for theonline,
sharedit isHSDPA
taken
into use next time the allocation is set up on the BTS. Although
AAL2 allocation if a route includes more than one VCC. If a single VCC is the max value
This
in parameter
the range is defines
14.4 thethe
Mbps, offset
valuevalue
of to be
this added tomust
parameter the corresponding
not be set to ToAWE_
be
selected by the value zero (0), the allocation is done to the least loaded VCC. If
bigger
This
multiplethan
parameter the
VCCs are Iub capacity
defines between
the offset
selected the
valuethe
by setting BTS
to value and
be added the
one to RNC.
(1),the
thecorresponding ToAWS_R
allocation is divided
equally to all existing
This parameter definesVCCs undervalue
the offset a route. If the
to be selection
added to themethod is modified
corresponding ToAWS_
online, it is taken into use next time the allocation is set up on the route.
This parameter is the TQM object identifier. The TQM object defines the transport bearer prioritization mapping based on t
This parameter defines the offset value to be added to the corresponding ToAWS_R
The Iub Transport QoS feature is enabled for the BTS once the TQM managed object is related to the WBTS managed ob
The TQM identification gives the reference to the TQM object (Transport QoS
Mapping)
The TQM used for the WBTS.
identification gives the The TQM object
reference defines
to the the transport
TQM object bearer
(Transport QoS
prioritization
Mapping) used mapping
for the based
WBTS. on the
The air
TQM interface
object channel
defines thetype and
transportthe radio
bearer
The TQMlayer
network identification
scheduling gives the reference to the TQM object (Transport QoS
priority.
prioritization
Mapping) used mapping the based
forrelatedWBTS. onThe
theTQM
air interface
object channelthe
defines type and thebearer
transport radio
If the
network TQM is
layer not
scheduling to the WBTS
priority. then the basic RT/NRT DSCP mapping is
prioritization
applied mapping
according to thebased
DSCP on definitions
the air interface channel type and the radio
If the TQM
network is not
layer related
scheduling to the WBTS
priority. theninthe
thebasic
WBTS object.
RT/NRT DSCP mapping is
applied
If the Iubaccording
TQM to
is not relatedthe DSCP
to the definitions in the WBTS object.
With Transport Solution for WBTS
Network then the basic
Sharing RT/NRT
feature DSCP
operator maymapping
define is
applied
additionalaccording
TQM instanceto the DSCP definitions
references in
for user the WBTS
plane object.
traffic.operator
With PLMN
With Iub Transport Solution for Network Sharing feature mayid specific
define
TQM configuration
additional TQM instance different DSCP
references allocation
for user schemes
plane can be implemented
traffic.operator
With PLMN in
With
betweenIub Transport
the Solution
operators. for Network Sharing feature mayid specific
define
TQM configuration
additional TQM instance different DSCP allocation
references schemes
for user plane canWith
traffic. be implemented
PLMN id specificin
between
TQM the operators.
Note: configuration
The first TQMdifferent DSCP allocation
object identifier (WBTS - schemes
TQMId) iscan be implemented
selected for the setupin
between
when the
the PLMN operators.
id isobject
not known or when the-referred
Note: The first TQM identifier (WBTS TQMId) TQMId attribute
is selected has
for the setup
unspecified
when the PLMNvalue.
id is not known or when the referred TQMId attribute is has
Note: The first TQM object identifier (WBTS - TQMId) is selected for the setup
unspecified
when the PLMN value.
id is not known or when the referred TQMId attribute is has
unspecified value.

0 to 100, step 1 % 0%
1 to 5, step 1 255
0 to 100, step 1 % 0
0 to 100 step 1 0
1 to 128, step 1 1
RLC PDU size 656 is not used (0), RLC RLC PDU size 656 can be used (2)
PDU
-3...0 size 656 should
dB, step 0.1 dB not be used (1), RLC -3 dB
PDU size 656 can be used (2)
-60...-28 dB, step 1 dB -28 dB
All criteria (0), Atleast one criteria (1), RT -
and NRT (0),
Disabled HSDPA power
Enabled (1)or any other Disabled (0)
criteria (2)
1 to 5, step 1 (255, not defined) 255
0 to 100, step 1 % 0%
0...100 %, step 1 % 50%
0...100 %, step 1 % 95%
0...100 %, step 1 % 100%
0...100 %, step 1 % 95%
0...100 %, step 1 % 95%
0...100 %, step 1 % 95%
0...100 %, step 1 % 95%
0...100 %, step 1 % 95%
0...100 %, step 1 % 1%
1...20, step 1 5
1...20, step 1 5
0...20, step 1 5
0...20, step 1 5
quality check done (0), quality check not quality check done (0)
done
0.5...5(1)
s, step 0.5 s 1.5 s
0.5...5 s, step 0.5 s 0.5 s
0.5...5 s, step 0.5 s 2.5 s
0 (0), 1 (1), 2 (2), 3 (3), 4 (4), 5 (5), 6 (6), 7 5 (5)
(7), 8 (8), 9 (9), 11 (10), 13 (11), 15 (12),
17 (13), 19 (14)
0...255 characters Not applicable
not used (0), other (1), UltraBTS (2), Flexi Not applicable
ISHO (0), IFHO (1) ISHO (0)
OFF (0), ON (1) OFF (0)
0...23 hours, step 1 hours 22 hours
0...59 minutes, step 1 minutes 0 minutes
0...23 Hours, step 1 Hours 6 hours
None (0), Saturday (1), Sunday (2), None (0)
Saturday and Sunday (3)
0...0.5, step 0.05 0

10...200 Frames, step 1 Frames 20 frames
0...0.5, step 0.05 0
10...200 radio fram, step 1 radio fram 10 Frames
0...20, step 1 1
200...2000 ms, step 100 ms 400 ms
Locked (0), Unlocked (1), Not defined (2) Not defined (2)
1...588, step 1, Not Defined (65535) Not applicable
Insecure (0), Secure (1), Undefined (255) Undefined (255)
PS RAB Reconfiguration is not supported PS RAB Reconfiguration is not supported
(0),
OFFPS (0),RAB Reconfiguration
RFMaster is supported
(1), RFSlave (2) (0)(0)
OFF
(1)
configuration
1...65534, stepaction
1 (1), NetAct RNW plan Not applicable
originated configuration action (2),
0...80
Elementcharacters
Manager originated configuration Not applicable
action
0...255(3), Configuration action by
characters No information available
automatic tuning function (4), Element
Manager originated mass config action (5),
NetAct
Only DCHoriginated direct RNW
CM supported change CM
(0), HSDPA (6) sup Only DCH CM supported (0)
1...10, step 1, No effect for measurement 0
averaging in RNC. (0),
Chase Combining (0) Incremental Incremental Redundancy Combining (1)
Redundancy
Not enabled (0), Combining
3 users (1)
enabled (3), 12 Not enabled (0)
users
100...2000 ms, step 100 ms enabled (24),
enabled (12), 24 users 2000 ms
60 users enabled (60)
1...1024, step 1, Number of E-DCH 0
allocations
1...20, step is1 not restricted. (0) 4
1...10, step 1, No effect for measurement 0
averaging in RNC.
1...255, step 1 (0) 5
50...2000 ms, step 50 ms 100 ms

0.01...320 ms, step 0.01 ms, HSUPA CC 100 ms
mechanism disabled.
0.01...320 ms, Internal
step 0.01 information.
ms, HSUPA CC 100 ms
(0)
mechanism disabled. Internal information.
0...320 ms, step 0.01 ms 70 ms
(0)
0...320 ms, step 0.01 ms 70 ms
0...320 ms, step 0.01 ms 50 ms
0...320 ms, step 0.01 ms 50 ms
0...1, step 0.0001 0.1
0...1, step 0.0001 0.1
NOT ENABLED (0), ENABLED (1) NOT ENABLED (0)

0...63, step 1 46
0...63, step 1 0
0...63, step 1 34
0...63, step 1 26
0...63, step 1 34
Disabled (0), Enabled (1) Enabled (1)
0...63, step 1 34
10...2360 cps, step 10 cps, Preventing 170 cps
overload
10...1000control not done
kbps, step based
10 kbps, on ATM
Preventing 80 kbps
(0)
overload control not done based on IP (0)
1...248, step 1, Preventing overload 6
control notstep
1...4095, done
1, based on route
IP Based CID (0)
is not 0
defined
1...4095,(0)
step 1, IP Based route is not 0
defined (0)
1...4095, step 1 0
1...4095, step 1 0
1...65535, step 1, IPNB object is not 0
connected to the Bit
Bit 0: NRT DCH, WBTS (0)HSPA, Bit 2:
1: RT 15
NRT
Bit 0:HSPA,
IP Iub, Bit
Bit 3:
1: SRB
NRT HSPA,
HSDPA, Bit 2: 0
NRT HSUPA, Bit 3: Streaming
Disabled (0), Enabled (1) HSDPA, Bit Disabled (0)
4: Streaming HSUPA, Bit 5: NRT DCH, Bit
540...1472,
6: SRB HSPA, stepBit1 7: Associated DL SRB 1428
DCH,
15...60 ms, step 1 ms 50 ms
1026...65535, step 1 1026
0...384, step 1 48
Overbooking OFF (0), Overbooking ON (1) Overbooking OFF (0)
DISABLED (0), ENABLED (1) DISABLED (0)
0...64 Mbps, step 0.1 Mbps 0 Mbps
Single VCC (0), Multiple VCC (1) Single VCC (0)
0...50 ms, step 1 ms 0 ms
0...100 ms, step 1 ms 0 ms
1...4, step 1, TQM object is not connected 0
to thestep
1...4, WBTS1 (0) 0
1...4, step 1 0
1...4, step 1 0
Nokia Value All Site Types
Disabled (0) Enabled (1)

0% 0%
255 255
0 0
0 0
1 1
RLC PDU size 656 can be used (2) RLC PDU size 656 can be used (2)
-3 dB -3 dB
-28 dB -32 dB
- -
255 255
0% 0%
50% 50%
95% 95%
100% 100%
50% 50%
95% 95%
50% 50%
50% 50%
50% 50%
1% 1%
5 5
5 5
5 5
5 5
quality check done (0) quality check done (0)

1.5 s 1.5 s
0.5 s 0.5 s
2.5 s 2.5 s
5 (5) 5 (5)

ISHO (0) ISHO (0)
OFF (0) OFF (0)
22 hours 22 hours
0 minutes 0 minutes
6 hours 6 hours
0 minutes 0 minutes
22 hours 22 hours
0 minutes 0 minutes
6 hours 6 hours
0 minutes 0 minutes
None (0) None (0)
0 0
20 frames 10 Frames
0 0
10 Frames 10 Frames
1 1
400 ms 200 ms
Not defined (2) Not defined (2)

Undefined (255) Undefined (255)
PS RAB Reconfiguration is not supported PS RAB Reconfiguration is supported (1)
(0)(0)
OFF OFF (0)
No information available -
Only DCH CM supported (0) HSDPA CM supported (1)

0 0
Incremental Redundancy Combining (1) Incremental Redundancy Combining (1)
Not enabled (0) 60
2000 ms 400 ms
0 0
4 5
0 0
5 10
100 ms 200 ms

100 ms 300 ms
100 ms 100 ms
70 ms 70 ms
70 ms 70 ms
50 ms 40 ms
50 ms 50 ms
0.1 0.1
0.1 0.1
Disabled (0) Please see embedded comments
NOT ENABLED (0) NOT ENABLED (0)

46 46
0 0
34 Please see embedded comments
26 26
34 34
34 34
170 cps 170 cps
80 kbps 80 kbps
6 6
15 7
1428 1428
50 ms 50 ms
1026 1026
48 48
Overbooking OFF (0) Please see embedded comments
3 minutes 3 minutes
DISABLED (0) DISABLED (0)
0 Mbps 0 Mbps
Single VCC (0) Single VCC (0)
0 ms 0 ms
0 ms 0 ms
0 ms 0 ms
0 ms 0 ms
0 0
0 0
0 0
0 0
Comments
Changed to facilitate HSPA+ rollout
to allow 15 dB PC range for AMR 12.2
Changed to 35% Feb 2010 following optimisation work in London (J Button)

AP 9 Who Owns?
ISHO triggered by default when cell is shutdown
Used for O&M - default is ok for normal operation
Set by the system
Changed to HSDPA CM supported (1) Nov 2010 following trial by Pinaki Roychowdhury

Changed to a default value of "60" as per change Request
0 to support new WN7.0 baseband designs.

associated with Location based Services

HSUPA Congestion Control
RAN1470 HSUPA 2ms TTI and HSUPA Congestion Control
RAN1578 HSPA Transport Fallback

IP Based Iub for Flexi WCDMA BTS
IP Based Iub for Flexi WCDMA BTS or Dual Iub for Flexi WCDMA BTS
IP Based Iub for Flexi WCDMA BTS or Dual Iub for Flexi WCDMA BTS
(IP Based Iub for Flexi WCDMA BTS or Dual Iub for Flexi WCDMA BTS) and Streaming QoS for HSPA

RAN1578 HSPA Transport Fallback
Relates only to IP Iub - not in use
Set to 1 (ON) for HS7.2 Heavy or 6-sector sites. Set to 0 (OFF) for all others
Parameter Type IPD PTY ID Discrepancy - Criticality Discrepancy Checking Frequency

38169 Daily
38170 Daily
38246 Daily
38247 Daily
38248 Daily
38016 Daily
38017 Daily
38018 Daily
38019 Daily
38195 Weekly

12368 Extended Discrepancy No Auto Disc Check Required

OUTPUT 38161 No Auto Disc Check Required
Weekly
Weekly


11276 Discrepancy No Auto Disc Check Required



Weekly
Weekly
Weekly
Weekly
Weekly
Weekly
Weekly
Weekly
Weekly


Weekly

38167 Extended Discrepancy Every 2 hours
New in RU30
New in RU30
New in RU30
New in RU30
New in RU30
New in RU30
New in RU30
New in RU30
New in RU30
New in RU20
New in RU20
New in RU20
New in RU20
New in RU20
New in RU20
New in RU20
New in RU20
New in RU20
New in RU20
New in RU20
New in RU20
New in RU30
New in RU30
New in RU20
New in RU20
New in RU20
New in RU20
New in RU20
New in RU20
New in RU20
New in RU20
New in RU20
New in RU20
New in RU20
New in RU20
New in RU20
New in RU20
New in RU20
New in RU20
New in RU20
New in RU20
New in RU20
New in RU20 on TOP
New in RU20
New in RU20 on TOP

5.1
9.0
9.0
9.0
New in RU40 9.0

New in RU40 8.0
4.8
4.8
4.8
4.8
9.0
9.0
4.5
9.0
9.0
9.0
9.0
9.0
4.5
8.19
9.0
New in RU40 8.0
9.0
9.0
5.1
9.0
9.0
4.5
New in RU40 8.0
4.5
6.1
New in RU40 8.0

New in RU40 8.0
6.1
6.1
New in RU40 8.0
New in RU40 8.0
4.5
9.0
4.5
9.0
9.0
9.0
9.0
9.0
New in RU40 8.0
New in RU40 8.0
New in RU40 8.0
WCEL Parameters
Managed
Object

AdminPICState Admin PIC state WCEL
AmpliRatioOptHSRACH HS-RACH amplitude ratio optimized WCEL
AMROverSC AMROverSC WCEL
AMROverTransmission AMROverTransmission WCEL
AMROverTxNC AMROverTxNC WCEL
AMROverTxNonHSPA AMROverTxNonHSPA WCEL
AMROverTxTotal AMROverTxTotal WCEL
AMRSF AMRSF WCEL
AMRTargetSC AMRTargetSC WCEL
AMRTargetTransmission AMRTargetTransmission WCEL
AMRTargetTxNC AMRTargetTxNC WCEL
AMRTargetTxNonHSPA AMRTargetTxNonHSPA WCEL
AMRTargetTxTotal AMRTargetTxTotal WCEL
AMRUnderSC AMRUnderSC WCEL
AMRUnderTransmission AMRUnderTransmission WCEL
AMRUnderTxNC AMRUnderTxNC WCEL
AMRUnderTxNonHSPA AMRUnderTxNonHSPA WCEL
AMRUnderTxTotal AMRUnderTxTotal WCEL
AssignedPICPool Cell assigned to PIC pool WCEL
AutoACDSACRestriction Domain Specific Access Class Rest WCEL
AutoACResULOLThr Automatic Access Class Restrictio WCEL
AutoACRPrxTotalAvgWs Automatic Access Class window siz WCEL
CableLoss Cable Loss WCEL
CCHSetupEnabled RRC Connection Setup on CCH En WCEL
CIRForFDPCH Carrier to interference ratio for F WCEL
CodeTreeOptimisation Code tree optimisation WCEL
CodeTreeOptimisationGuardTime Code Tree Optimisation Guard Tim WCEL
CodeTreeOptTimer Code tree optimisation timer WCEL
CodeTreeUsage Code Tree Usage WCEL
CPICHEcNoSRBMapRRC CPICH Ec/No thr for SRB mapping WCEL
CPICHRSCPSRBMapRRC CPICH RSCP thr for SRB mapping WCEL
Offset of the P-CPICH and
CPICHtoRefRABoffset WCEL
reference service powers
CSAMRModeSET Configured CS AMR mode sets WCEL
CSAMRModeSETWB Configured CS WAMR mode sets WCEL
DPCHOverHSPDSCHThreshold NRT DPCH over HS-PDSCH code o WCEL
DRRCprxMargin Prx Margin for DRRC WCEL
DRRCprxOffset Prx Offset for DRRC WCEL
DRRCptxMargin Ptx Margin for DRRC WCEL
DRRCptxOffset Ptx Offset for DRRC WCEL
EbNoSetIdentifier Identifier of Eb/No parameter set WCEL
EvamDInit Initial phase offset WCEL
EvamNumPhaseOffset Phase offset amount WCEL
EvamTKeep Keep time WCEL
EvamTSweep Sweep time WCEL
FDPCHCodeChangeEnabled F-DPCH code change enabled WCEL
FDPCHEnabled F-DPCH enabled WCEL
FDPCHSetup F-DPCH setup WCEL
HappyBitDelayConHSRACH Happy bit delay condition for HS- WCEL
HSDPA64QAMallowed HSDPA 64 QAM allowed WCEL
HSDPA64UsersEnabled HSDPA 64 users enabled WCEL
HSDPAenabled HSDPA enabled WCEL
HSFACHCapability High Speed FACH Capability WCEL
HSFACHEnabled High Speed Cell_FACH DL Enable WCEL
HSFACHRABDRAEnabled HSFACH direct resource allocatio WCEL
HSFACHRel7ConSetupEC HSFACH Rel7UE EstCause mappin WCEL
HSFACHRel8ConSetupEC HSFACH Rel8UE EstCause mappin WCEL
HSPA128UsersPerCell HSPA 128 Users per Cell WCEL
HSPA72UsersPerCell HSPA 72 Users per Cell WCEL
HSPDSCHCodeSet HS-PDSCH code set WCEL
HS-PDSCH code upgrade margin
HSPDSCHMarginSF128 WCEL
for SF128 codes
HSRACHCapability High Speed RACH Capability WCEL
HSRACHExtendedAI Use of Extended Acquisition Indi WCEL
HSRACHImplicitRelease Common E-DCH implicit release f WCEL
HSRACHMaxAllocTimeCCCH Maximum E-DCH resource alloc ti WCEL
HSRACHMaxPeriodCollis Max period for collision resolutio WCEL
HSRACHSubChannelNumber Available Sub Channel Number fo WCEL
HSRACHTransmisBackOff Additional E-DCH transmission ba WCEL
HSUPA 16QAM usage allowed in
HSUPA16QAMAllowed WCEL
a cell
HSUPA2MSTTIEnabled HSUPA 2 ms TTI enabled WCEL
HSUPA user limit for 16QAM
HSUPAUserLimit16QAM WCEL
usage
MaxBitRateDLPSNRT Maximum DL bit rate for PS domai WCEL
MaxBitRateULPSNRT Maximum UL bit rate for PS domai WCEL
MaxCodeReleases Max Code Releases WCEL
MaxNbrOfHSSCCHCodes Maximum number of HS-SCCH co WCEL
MHA MHA used WCEL
MIMOEnabled MIMO Enabled WCEL
PICState PIC state WCEL
PowerOffsetPreamHSRACH Power Offset Last Transmitted Pr WCEL
PriScrCode Primary downlink scrambling code WCEL
Interference margin for the
PrxLoadMarginDCH WCEL
minimum ULmargin
Interference DCH load
for the
PrxLoadMarginMaxDCH WCEL
maximum
Max targetUL DCH load
received wide band
PrxMaxOrigTargetBTS WCEL
original power for BTS
Offset for received Wireless
PrxOffsetWPS WCEL
Priority Servicetransmission
Cell maximum power
PtxCellMax WCEL
power
Planned maximum downlink
PtxDLabsMax WCEL
transmission power transmission
F-DPCH maximum of a radio link
PtxFDPCHMax WCEL
power
F-DPCH minimum transmission
PtxFDPCHMin WCEL
power
PtxMaxHSDPA Maximum allowed HSDPA power WCEL
The power offset of E-xxCH for
PtxOffsetExxCH2ms WCEL
2ms TTI offset of E-xxCH for
The power
PtxOffsetExxCHSHO WCEL
SHO
The power offset of F-DPCH for
PtxOffsetFDPCHSHO WCEL
SHO
Offset for transmitted non-HSDPA
PtxOffsetHSDPA WCEL
power
Offset for transmitted Wireless
PtxOffsetWPS WCEL
Priority
Maximum Service power code power
transmitted
PtxPSstreamAbsMax WCEL
of PS streaming
Target RAB non-HSDPA
for transmitted
PtxTargetHSDPA WCEL
power
Maximum value for dynamic total
PtxTargetTotMax WCEL
tx power value for dynamic total
Minimum
PtxTargetTotMin WCEL
tx power service in the max
Reference
RefServForCodePower WCEL
code power definition
RxDivIndicator Rx Diversity Indicator WCEL
SectorID Sector Identifier WCEL
SIR target offset for DPCCH with
SIRDPCCHOffsetEDPCH WCEL
E-DPCH
SRB DCH bit rate in RRC setup
SRBBitRateRRCSetupEC WCEL
based on EC in RRC setup
SRB mapping
SRBMapRRCSetupEC WCEL
based on EC
TPCCommandERTarget TPC command error rate target WCEL
UEDRXCapability UE DRX in Cell_FACH capability WCEL
Maximum UE transmission power
UEtxPowerMaxDPCH WCEL
on DPCH UE transmission power
Maximum
UEtxPowerMaxPRACH WCEL
on
MaxPRACH
UE transmission power on
UEtxPowerMaxPRACHConn WCEL
PRACH
Max nbr for connected
of conv mode
users per
UsersPerHSSCCHCode WCEL
reserved HS-SCCH code
VoiceCallPriority Voice Call Prioritisation During Hig WCEL
WACSetIdentifier WAC Parameter Set Identifier WCEL
Blind HO EcNo threshold for
BlindHOEcNoThrTarget WCEL
target cell
Blind HO RSCP threshold for
BlindHORSCPThrTarget WCEL
target cell
CellWeightForHSDPALayering Cell weight for HSDPA layering WCEL
DCellHSDPACapaHO DC HSDPA Capability HO WCEL
DCellHSDPAFmcsId DC HSDPA FMCS Identifier WCEL
DirectedRRCEnabled Directed RRC connection setup en WCEL
Directed RRC connection setup
DirectedRRCForHSDPALayerEnabled WCEL
for HSDPA layer enabled
DirectSCCEnabled Direct SCC Enabled WCEL
DLLoadStateTTT DL loaded state time to trigger WCEL
FastActOfTargetServCell Faster Activation Of Target Serving WCEL
FastCompletionOfSCC Faster Completion of SCC Procedu WCEL
FastHSPAMobilityEnabled Fast HSPA Mobility Enabled WCEL
FMCLIdentifier FMCL Identifier WCEL
Maximum Allowed DL User Bitrate
HHoMaxAllowedBitrateDL WCEL
in HHO Allowed UL User Bitrate
Maximum
HHoMaxAllowedBitrateUL WCEL
in HHOCapability Based Handover
HSPA
HSCapabilityHONumbUE WCEL
Max
HSPANumber of UE
Capability Based Handover
HSCapabilityHOPeriod WCEL
Period
HSDPACellChangeMinInterval Minimum interval between serving WCEL
HSDPACPICHAveWindow Averaging window of the CPICH E WCEL
HSDPACPICHReportPeriod Reporting period of the CPICH Ec WCEL
HSDPAFmcgIdentifier HSDPA FMCG identifier WCEL
HSDPAFmciIdentifier HSDPA FMCI identifier WCEL
HSDPAFmcsIdentifier HSDPA FMCS identifier WCEL
HSDPA layering for UEs in
HSDPALayeringCommonChEnabled WCEL
common channels enabled
HSDPAMaxCellChangeRepetition Max number of repetitive serving WCEL
HSDPAServCellWindow CPICH Ec/No window for serving H WCEL
HSDPASRBWindow CPICH Ec/No window for SRBs on WCEL
HSPA load state HSDPA bit rate
HSLoadStateHSDBRLimit WCEL
limit
HSPA load state HSDPA power
HSLoadStateHSDOffset WCEL
Offset
HSPA load state E-DCH bit rate
HSLoadStateHSUBRLimit WCEL
limit
HSPA load state HSUPA power
HSLoadStateHSUOffset WCEL
Offset
HSPA Load State HSUPA
HSLoadStateHSUResThr WCEL
Resource Threshold
HSPACapaHO HSPA Capability Based Handover WCEL
HSPAFmcsIdentifier HSPA FMCS identifier WCEL
HSPASCCSpecificATO HSPA SCC Specific ATO Value WCEL
IncomingLTEISHO Incoming ISHO from LTE WCEL
LayeringRRCConnRelTargFreq - TargetFrequency Target frequency WCEL
LayeringRRCRelEnabled Layering in RRC Connection Rele WCEL
Load HO DL NRT capacity
LHOCapaReqRejRateDL WCEL
request
Load HOrejection
UL NRTrate
capacity
LHOCapaReqRejRateUL WCEL
request
Delay torejection
broadcastrate
NRT load
LHODelayOFFCapaReqRejRate WCEL
based HO state over
Delay to broadcast hard blocking
LHODelayOFFHardBlocking WCEL
load
Delaybased HO state
to broadcast over
interference
LHODelayOFFInterference WCEL
load
Delaybased HO state
to broadcast DLover
SC load
LHODelayOFFResRateSC WCEL
based HO state over
LHOHardBlockingBaseLoad Load HO hard blocking base load WCEL
LHOHardBlockingRatio Load HO hard blocking ratio WCEL
Hysteresis for NRT load
LHOHystTimeCapaReqRejRate WCEL
measurement of LHO
Hysteresis for hard blocking
LHOHystTimeHardBlocking WCEL
measurement of LHO
Hysteresis for interference
LHOHystTimeInterference WCEL
measurement of LHO
Hysteresis for DL SC
LHOHystTimeResRateSC WCEL
measurement of LHO
LHONRTTrafficBaseLoad Load HO NRT traffic base load WCEL
Number of UEs in inter-frequency
LHONumbUEInterFreq WCEL
load HO of UEs in inter-RAT load
Number
LHONumbUEInterRAT WCEL
HO
LHOPwrOffsetDL Load HO DL power offset WCEL
LHOPwrOffsetUL Load HO UL power offset WCEL
Load HO reservation rate of DL
LHOResRateSC WCEL
spreading codes
Window size for NRT load
LHOWinSizeOFFCapaReqRejRate WCEL
measurement
Window size forto hard
stop blocking
LHOs
LHOWinSizeOFFHardBlocking WCEL
measurement
Window size forto interference
stop LHOs
LHOWinSizeOFFInterference Window size for WCEL
measurement to DL SC
stop LHOs
LHOWinSizeOFFResRateSC reservation rate measurement to WCEL
Window
stop LHOssize for NRT load
LHOWinSizeONCapaReqRejRate WCEL
measurement
Window size forto hard
start blocking
LHOs
LHOWinSizeONHardBlocking WCEL
measurement
Window size forto interference
start LHOs
LHOWinSizeONInterference Window size for WCEL
measurement to DL SC
start LHOs
LHOWinSizeONResRateSC reservation rate measurement to WCEL
Load Based CPICH EcNo for
start LHOs
LoadBasedCPICHEcNoSRBHSPA WCEL
SRB on HSPA
Load Based CPICH EcNo
LoadBasedCPICHEcNoThreEDCH2MS WCEL
Threshold for E-DCH TTI 2 ms
LTEHandoverEnabled Outgoing LTE Handover Enabled WCEL
LTELayerCellHSLoad LTE Layer Cell HSDPA Load WCEL
LTELayeringMeasActivation Measurement Based LTE WCEL
Maximum number of UEs in CM
Layering Activation
MaxNumberUECmHO WCEL
due to critical
Maximum number HO measurement
of UEs in CM
MaxNumberUECmSLHO WCEL
due
Max to SLHO of
number measurement
UEs in HSDPA
MaxNumberUEHSPACmHO WCEL
CM due to critical
Max number of UEs HOin HSDPA
MaxNumberUEHSPACmNCHO WCEL
CM due to NCHO
MBLBInactivityEnabled MBLB in Inactivity Enabled WCEL
MBLBLoadInfoDistr MBLB Load Information Distributio WCEL
MBLBMobilityEnabled MBLB in Mobility Enabled WCEL
MBLBRABSetupEnabled MBLB in RAB Setup Enabled WCEL
MBLBRABSetupMultiRAB MBLB in RAB Setup for Multi RAB WCEL
MBLBStateTransEnabled MBLB in State Transition Enabled WCEL
MDTPeriodicMeasEnabled Periodic Measurements in UE WCEL
MIMO HSDPA
and WBTS Capability
for MDT
MIMOHSDPACapaHO WCEL
Handover
NrtFmcgIdentifier NRT FMCG Identifier WCEL
NrtFmciIdentifier NRT FMCI Identifier WCEL
NrtFmcsIdentifier NRT FMCS Identifier WCEL
PFLIdentifier PFL Identifier WCEL
PowerOffsetUpdMsgSize Power Offset Update Message Size WCEL
RRCReDirTargetSys - TargetsystemBackgroundCall RRC Connection Redirection WCEL
Target System forRedirection
RRC Connection background
RRCReDirTargetSys - TargetsystemConversationalCall WCEL
causes
conversational
RRCReDirTargetSys - TargetsystemDetach RRC Connection WCEL
causes
detach causes
RRCReDirTargetSys - TargetsystemEmergencyCall RRC Connection WCEL
RRC Connection emergency call
RRCReDirTargetSys - TargetsystemHighPrioritySignalling WCEL
causes
high priority
RRCReDirTargetSys - TargetsystemInteractiveCall RRC Connection WCEL
signalling
Target causes
System forRedirection
interactive
RRCReDirTargetSys - TargetsysteminterRATchangeorder RRC Connection WCEL
causes
inter-RAT cell
RRCReDirTargetSys - TargetsysteminterRATreselection RRC Connection WCEL
change
Target order causes
inter-RAT re-
RRCReDirTargetSys - TargetsystemLowPrioritySignalling RRC Connection WCEL
selection
Target causes
low priority
RRCReDirTargetSys - TargetsystemMBMSrbrequest RRC Connection WCEL
signalling
Target causes
MBMS ptp RB
RRCReDirTargetSys - TargetsystemMBMSreception RRC Connection WCEL
request
Target causes
MBMS
RRCReDirTargetSys - Targetsystemreestablishment RRC Connection WCEL
reception
Target causes
call re-
RRCReDirTargetSys - Targetsystemregistration RRC Connection WCEL
establishment
Target causes
registration
RRCReDirTargetSys - TargetsystemStreamingCall RRC Connection WCEL
causes
streaming
RRCReDirTargetSys - TargetsystemSubscribedTraffic RRC Connection WCEL
causes
subscribed
RRCReDirTargetSys - Targetsystemunknown RRC Connection WCEL
traffic causes
Target System for unknown
RtFmcgIdentifier RT FMCG Identifier WCEL
causes
RtFmciIdentifier RT FMCI Identifier WCEL
RtFmcsIdentifier RT FMCS Identifier WCEL
HSDPA FMCG identifier for AMR
RTWithHSDPAFmcgIdentifier WCEL
multi-service
HSDPA FMCI identifier for AMR
RTWithHSDPAFmciIdentifier WCEL
multi-service
HSDPA FMCS identifier for AMR
RTWithHSDPAFmcsIdentifier WCEL
multi-service
HSPA FMCS identifier for AMR
RTWithHSPAFmcsIdentifier WCEL
multi-service
Number of inter-frequency service
ServHONumbUEInterFreq WCEL
HOs
ServHONumbUEInterRAT Number of inter-RAT service HOs WCEL
Period to start inter-frequency
ServHOPeriodInterFreq WCEL
service HOs
Period to start inter-RAT service
ServHOPeriodInterRAT WCEL
HOs
SmartLTELayeringEnabled LTE Layering Triggers WCEL
SmartLTELayeringRSCP Smart LTE Layering RSCP thresho WCEL
SmartLTELayeringTSysSel Smart LTE Layering Target System WCEL
SmartLTELayeringUA Smart LTE Layering NRT user amou WCEL
SRBDCHFmcsId FMCS identifier for standalone S WCEL
SRBHSPAFmcsId FMCS identifier for standalone S WCEL
Max increment in the received
MaxIncrInterferenceUL WCEL
wide band interference
Filtering Coefficient of PrxTotal
PrxMeasFilterCoeff WCEL
measurement
Uplink noise level in BS digital
PrxNoise WCEL
receiver
PrxNoiseAutotuning PrxNoise autotuning allowed WCEL
PrxOffset Offset for received power WCEL
PrxTarget Target for received power WCEL
Maximum target for the received
PrxTargetMax WCEL
total wideband
Filtering power
Coefficient of PtxTotal
PtxMeasFilterCoeff WCEL
measurement
PtxOffset Offset for transmitted power WCEL
PtxTarget Target for transmitted power WCEL
Filtering Coefficient of PRACH
RACHmeasFilterCoeff WCEL
measurement
Override switch for voice services
VoiceOverrideSTHSUPA WCEL
in the HSUPA cell
O&M Parameters
AdminCellState Administrative Cell State WCEL
Restriction Group Id for Circuit
CSGroupId WCEL
Switched Acces
CellAdditionalInfo Cell Additional Information WCEL
EDCHCapability E-DCH Capability WCEL
EDCHOpState Operational E-DCH state WCEL
EVAMCapability EVAM capability WCEL
EVAMInUse EVAM in use WCEL
HSDPAcapability HSDPA Capability WCEL
HSDSCHOpState Operational HS-DSCH state WCEL
ICRCapability ICR Capability WCEL
Restriction Group Id for Packet
PSGroupId WCEL
Switched AccesAccess Regulation
Radio Network
RNARGroupId WCEL
Function Group Id
WCELChangeOrigin Change origin WCEL
WCelState WCDMA Cell Operational State WCEL
DPCModeChangeSupport DPC Mode Change Support WCEL
Required received C/I on PRACH
PRACHRequiredReceivedCI WCEL
at WCDMA BTS
Transmission power of the PICH
PTxPICH WCEL
channel
Power offset last preamble and
PowerOffsetLastPreamblePRACHmessage WCEL
PRACH message
Power offset for SCCPCH TFCI
PowerOffsetSCCPCHTFCI - PO1_15 WCEL
(15 ksps)
(30 ksps)
(60 ksps)
Power ramp step on PRACH
PowerRampStepPRACHpreamble WCEL
preamble
Transmission power of the AICH
PtxAICH WCEL
channel
HS-PDSCH Power of HS-FACH
PtxBCCHHSPDSCH WCEL
for BCCH Power of HS-FACH for
HS-SCCH
PtxBCCHHSSCCH WCEL
BCCH
The Maximum transmission
PtxMaxEHICH WCEL
power E-HICH power offset of
The transmission
PtxOffsetEAGCH WCEL
the E-AGCH
PtxOffsetEAGCHDPCCH The power offset of the E-AGCH WCEL
PtxOffsetEHICHDPCCH The power offset of the E-HICH WCEL
The transmission power offset of
PtxOffsetERGCH WCEL
the E-RGCH
PtxOffsetERGCHDPCCH The power offset of the E-RGCH WCEL
Transmission power of the
PtxPrimaryCCPCH WCEL
primary CCPCH channel
PtxPrimaryCPICH Transmission power of the primar WCEL
PtxPrimarySCH Transmission power of the primar WCEL
PtxSCCPCH1 Tx power of S-CCPCH for PCH/FAC WCEL
PtxSCCPCH2 Tx power of S-CCPCH for Standal WCEL
PtxSCCPCH2SF128 Tx power of S-CCPCH for Standal WCEL
PtxSCCPCH3 Tx power of S-CCPCH for SAB WCEL
Transmission power of the
PtxSecSCH WCEL
secondary SCH channel
Reserved E-RGCH and E-HICH
RsrvdSignaturesOffset WCEL
signatures per cell
ActivationTimeOffset Offset for activation time WCEL
Compressed Mode: Alternative
AltScramblingCodeCM WCEL
scrambling code
AppAwareRANEnabled Application Aware RAN Enabled WCEL
ATOSRBsOnHSPA Offset for activation time of SRBs WCEL
CPCEnabled CPC enabled WCEL
DBandHSDPAEnabled Dual Band HSDPA Enabled WCEL
DCellAndMIMOUsage DC-HSDPA and MIMO Usage WCEL
DCellHSDPAEnabled DC HSDPA Enabled WCEL
DCellHSUPAEnabled DC HSUPA Enabled WCEL
DeltaPrxMaxDown Maximum uplink power decrease in WCEL
DeltaPrxMaxUp Maximum uplink power increase in WCEL
DeltaPtxMaxDown Maximum downlink power decrease WCEL
DeltaPtxMaxUp Maximum downlink power increase WCEL
DRXCycleHSFACH Discontinuous Reception Cycle H WCEL
DRXInactiveTimerHSFACH Inactivity Supervision Timer of H WCEL
DRXInterruptHSDSCHData DRX Interruption by HS-DSCH dat WCEL
EDCHMinimumSetETFCI E-DCH minimum set E-TFCI WCEL
E-DCH minimum set E-TFCI 10
EDCHMinSetETFCIT0 WCEL
ms TTI for
Margin table 0 load for
FACH
FachLoadMarginCCH WCEL
downlink
Thresholdchannel type
for FACH selection
load for
FachLoadThresholdCCH WCEL
downlink channel type selection
Window size of HS-DSCH MAC-d
HSFACHActivityAveWin WCEL
flow of PS of
Threshold RBthe
onHS-DSCH
HS-FACH MAC-
HSFACHActivityThr WCEL
d flowtooftrigger
Time PS RBfor onactivity
HS-FACH
HSFACHActTimeToTrigger WCEL
measurement on HS-FACH
HSFACHDRXEnabled UE DRX with High Speed Cell FAC WCEL
Time to trigger for RLC
HSFACHRLCTimeToTrigger WCEL
measurement on measurement
DL traffic volume HS-FACH
HSFACHVolThrDL WCEL
threshold of HS-FACH
HspaMultiNrtRabSupport HSPA multi NRT RAB Support WCEL
HSPAQoSEnabled HSPA QoS enabled WCEL
HSPwrOffsetUpdateDelay HS-DPCCH power offset update de WCEL
HSRACHActivityAveWin Window size of E-DCH MAC-d flo WCEL
HSRACHActivityThr Threshold of the E-DCH MAC-d fl WCEL
HSRACHActTimeToTrigger Time to trigger for activity meas WCEL
HSRACHCommonEDCHRes Number of Common E-DCH Resour WCEL
HSRACHEnabled High Speed RACH Enabled WCEL
HSRACHMaxTotSymbolRate Maximum total uplink symbol rate WCEL
HSRACHMPO HS-RACH Measurement Power Off WCEL
HSRACHTimeToTrigger Traffic volume measurement time t WCEL
HSRACHVolThrUL UL traffic volume measurement th WCEL
HSUPAEnabled HSUPA enabled WCEL
InitialBitRateDL Initial bit rate in downlink WCEL
InitialBitRateUL Initial bit rate in uplink WCEL
MassEventHandler Mass Event Handler functions WCEL
Maximum number of E-DCHs in
MaxNumberEDCHCell WCEL
the cell
MaxNumberEDCHS Maximum number of E-DCH WCEL
Maximum number of
users per MAC-i/is HSDPA
scheduler
MaxNumberHSDPAUsers WCEL
users
Maximum number of HS-DSCH
MaxNumberHSDSCHMACdFlows WCEL
MAC-d flows HSDPA users per
Max number
MaxNumbHSDPAUsersS WCEL
MAChs/ehs
Max numberscheduler
HSDSCH MACd
MaxNumbHSDSCHMACdFS WCEL
flows per MAChs/ehs scheduler
MaxTotalUplinkSymbolRate Maximum total uplink symbol rate WCEL
MCellHSDPAEnabled Multi Cell HSDPA Enabled WCEL
MEHHSDPAUserNbrCQI HSDPA CQI user number for the M WCEL
MEHHSUPAUserNbr2msTTI HSUPA E-DCH 2 ms TTI user numbe WCEL
MEHLoadStateTtT Load state time-to-trigger for the WCEL
MEHMaxHSUPAUsers Temporary max number of HSUPA u WCEL
MEHQueueThreshold Scheduling queue threshold for th WCEL
MEHULLHSDPAUALimit UL load based HSDPA user amount WCEL
MIMOWith64QAMUsage MIMO with 64QAM usage WCEL
MinAllowedBitRateDL Minimum allowed bit rate in downli WCEL
MinAllowedBitRateUL Minimum allowed bit rate in uplink WCEL
Downlink NAS signalling volume
NASsignVolThrDL WCEL
threshold
Uplink NAS signalling volume
NASsignVolThrUL WCEL
threshold
Number of E-DCHs reserved for
NumberEDCHReservedSHOBranchAdditions Threshold foradditions
DL NRT DCH WCEL
SHO branch
OCdlNrtDCHgrantedMinAllocT allocation time in enhanced WCEL
DCH timecontrol
overload limit for UL NRT DCH
OCULNRTDCHGrantedMinAllocT WCEL
PBSgrantedMinDCHallocT - overload in
PBS granted E-DCH cell allocation
min DCH
WCEL
PBSgrantedMinDCHallocTequalP
PBSgrantedMinDCHallocT - time
PBS equal
granted priority
min DCH allocation
WCEL
PBSgrantedMinDCHallocThigherP time higher priority
PBSgrantedMinDCHallocT - PBS granted min DCH allocation
WCEL
PBSgrantedMinDCHallocTlowerP time lower priority
Interference margin for the
PrxLoadMarginEDCH WCEL
minimum
MaximumE-DCH load
target received wide
PrxMaxTargetBTS WCEL
band power for BTS
Max PS target in HSPA-DCH
PrxTargetPSMax WCEL
interference sharing
PrxTargetPSMaxtHSRACH Max PS target interference level WCEL
Min PS target in HSPA-DCH
PrxTargetPSMin WCEL
PS target step down in HSPA-
PrxTargetPSStepDown WCEL
DCH interference
PS target step up sharing
in HSPA-DCH
PrxTargetPSStepUp WCEL
High threshold of PtxTotal for
PtxHighHSDPAPwr Margin WCEL
dynamicfor total downlink
HSDPA pwr alloc
PtxMarginCCH transmission power for downilnk WCEL
DCH PStype
channel target adjust period for
selection
PtxTargetPSAdjustPeriod WCEL
dyn HSDPA pwr
Max DCH PS target allocfor dynamic
PtxTargetPSMax WCEL
HSDPA pwr allocation
PtxTargetPSMaxtHSRACH Max PS target power level with H WCEL
Min DCH PS target for dynamic
PtxTargetPSMin WCEL
HSDPA
DCH PSpwr allocation
target step down for
PtxTargetPSStepDown WCEL
dynamic
DCH PS HSDPA pwrup
target step alloc
for
PtxTargetPSStepUp Threshold for total downlink WCEL
dynamic HSDPA pwr alloc
PtxThresholdCCH transmission power for downlink WCEL
Margin
channelfor RACH
type load for
selection
RachLoadMarginCCH WCEL
downlink channel
Threshold for RACH type selection
load for
RachLoadThresholdCCH WCEL
downlink channel type selection
RXBurstHSFACH HS-FACH Reception Burst WCEL
SmartTrafVolThrDL DL traffic volume threshold for Sm WCEL
SmartTrafVolThrUL UL traffic volume threshold for Sm WCEL
T321 High Speed Cell FACH DRX operati WCEL
Target non-serving E-DCH to total
TargetNSEDCHToTotalEDCHPR WCEL
E-DCH
Downlink power
trafficratio
volume
TrafVolThresholdDLLow WCEL
measurement
UL loaded state low
forthreshold
HSPAusers bit
ULLoadStateHSUBRLimit WCEL
rate limit state for HSPA users
UL loaded
ULLoadStateHSUOffset WCEL
offset
VCPMaxHSDPAUsers Temporary max number of HSDPA u WCEL
VCPPtxOffset Voice Call Priority target threshol WCEL
Activate \ Deactivate support for
PCH24kbpsEnabled WCEL
24kbps
Limit forPCH
DC HSDPA users in
PWSMAVLimitDCHSDPA WCEL
activation
Limit for NRT HSDPAs for Cell
PWSMAVLimitNRTHSDPA WCEL
Activation Decision
PWSMAVLimitRTDCH RT DCH power limit for activation WCEL
Limit for RT HSDPAs for Cell
PWSMAVLimitRTHSDPA WCEL
Activation Decision
PWSMAVPwrNRTHSDPA NRT HSDPA power per user limit WCEL
RT HSDPA power limit for
PWSMAVPwrRTHSDPA WCEL
activation
PWSMCellGroup The PWSM cell group of a cell. WCEL
PWSMEXPwrLimit Power limit for virtual AC WCEL
PWSMEXUsrLimit User limit for virtual AC WCEL
Limit for DC HSDPA users in
PWSMSDLimitDCHSDPA WCEL
shutdown
PWSMSDLimitNRTDCH NRT DCH limit for shutdown WCEL
Limit for NRT HSDPAs for Cell
PWSMSDLimitNRTHSDPA WCEL
Shutdown Decision
PWSMSDLimitRTDCH RT DCH limit for shutdown WCEL
Limit for RT HSDPAs for Cell
PWSMSDLimitRTHSDPA WCEL
Shutdown
NRT HSDPA Decision
power per user
PWSMSDPwrNRTHSDPA WCEL
margin
PWSMSDPwrRTDCH RT DCH Power limit for shutdown WCEL
RT HSDPA power limit for
PWSMSDPwrRTHSDPA WCEL
shutdown
The shutdown order of cells in
PWSMShutdownOrder WCEL
one PWSM cell group
PWSMShutdownRemCell Shutdown of a remaining cell WCEL
HSPA Type of Cell in Power
PowerSaveHSPAType WCEL
Saving Mode
Telecom Parameters
Absolute priority level for cell
AbsPrioCellReselec WCEL
reselection
ACBarredList Access Class Barred list WCEL
AICHTraTime AICH Transmission Timing WCEL
AllowedPreambleSignatures Allowed preamble signatures WCEL
AllowedRACHSubChannels Allowed RACH subchannels WCEL
AppAwareRANCapability Application Aware RAN Capability WCEL
Cell_Reserved Cell Reserved for operator use WCEL
CellBarred Cell Barred WCEL
CellRange Cell range WCEL
Measurement to be used as
CellSelQualMeas WCEL
quality measure
CId Cell Identifier WCEL
CTCH capacity for High Priority
CTCHCapaHighPri WCEL
CBS
CPICH messages
Ec/No Threshold Value
CUCEcNoThreshold WCEL
For CUC
CPICH Usage
RSCP Threshold Value
CUCRSCPThreshold WCEL
For CUC Usage
DefMeasCtrlReading Deferred Measurement Control Re WCEL
HCS_PRIO HCS priority level for a cell WCEL
Scaling factor of Treselection in
InterFreqScaleTresel WCEL
inter-frequency
Scaling factor ofcase
Treselection in
InterRATScaleTresel WCEL
inter-RAT case
IntraFreq_Cell_Reselect_Ind Intra-frequency cell re-selection ind WCEL
KforCTCH CBS frame offset (K) WCEL
LAC Location area code WCEL
LcrId Local cell resource identifier WCEL
LTECellReselection LTE Cell Reselection WCEL
MaxDLPowerCapability Maximum DL Power Capability WCEL
MultiplePLMNListIncluded Multiple PLMN List Included WCEL
N300 N300 WCEL
N312 N312 WCEL
N312Conn N312 for connected mode WCEL
N313 N313 WCEL
N315 N315 WCEL
NbrOfSCCPCHs Number of SCCPCHs WCEL
Maximum number of cell
NCr WCEL
reselections
NforCTCH Period of CTCH allocation (N) WCEL
Maximum number of cell
NonHCSNcr WCEL
reselections in non-HCS
Evaluating period caseof
for amount
NonHCSTcrMax WCEL
reselections
Hysteresis toinrevert
non-HCS
from UE
NonHCSTcrMaxHyst WCEL
measurement in non-HCS
OffsetToBeginCTCHBSIndex Offset to Begin CTCH Block Set In WCEL
PI_amount Number of PI per frame WCEL
PRACH_preamble_retrans PRACH Preamble Retrans Max WCEL
PRACHScramblingCode PRACH scrambling code WCEL
QHCS Quality threshold level for HCS WCEL
Qhyst1 Cell reselection hysteresis 1 WCEL
Cell reselection hysteresis 1 for
Qhyst1FACH WCEL
FACH
Qhyst1PCH WCEL
PCH
Qhyst2 Cell reselection hysteresis 2 WCEL
Qhyst2FACH WCEL
FACH
Qhyst2PCH WCEL
PCH
Minimum required quality level in
QqualMin WCEL
the cell required RX level in the
Minimum
QrxlevMin WCEL
cell
RAC Routing Area Code WCEL
RACH maximum number of
RACH_tx_Max WCEL
preamble cyclesback-off upper
RACH random
RACH_Tx_NB01max WCEL
bound
RACH random back-off lower
RACH_Tx_NB01min WCEL
bound
RACH Inter Frequency
RACHInterFreqMesQuant WCEL
Measurement Quantity
RACH Intra Frequency
RACHIntraFreqMesQuant WCEL
Measurement Quantity
Usage of Relocation Commit
RelocComm_in_InterRNC_HHO WCEL
procedure in intersetup
RRC connection RNC HHO
RRCconnRepTimer1 WCEL
Retransmission Timer1
RRCconnRepTimer2 RRC connection setup Retransmiss WCEL
SABEnabled Service Area Broadcast Enabled WCEL
SAC Service area code WCEL
SACB Service Area Code for SAB WCEL
Threshold for inter-RAT
SHCS_RAT Threshold for inter-RAT WCEL
measurement rules in HCS
SHCS_RATConn measurement for connected WCEL
ShutdownStepAmount mode WCEL
Shutdown step amount
ShutdownWindow Shutdown window WCEL
SIB4Indicator Indicator of SIB4 WCEL
SIB7factor SIB7 expiration time factor WCEL
Sintersearch S intersearch WCEL
SintersearchConn S intersearch for connected mode WCEL
Sintrasearch S intrasearch WCEL
SintrasearchConn S intrasearch for connected mode WCEL
Slimit_SearchRAT S limit,SearchRAT WCEL
S limit,SearchRAT for connected
Slimit_SearchRATConn WCEL
mode
Scaling factor of Treselection for
SpeedScaleTresel WCEL
UE in high mobility
Sprioritysearch1 S prioritysearch1 WCEL
Sprioritysearch2 S prioritysearch2 WCEL
Ssearch_RAT S searchRAT WCEL
Ssearch_RATConn S searchRAT for connected mode WCEL
SsearchHCS S searchHCS WCEL
S searchHCS for connected
SsearchHCSConn WCEL
mode
T300 T300 WCEL
T312 T312 WCEL
T312Conn T312 for connected mode WCEL
T313 T313 WCEL
T315 T315 WCEL
TBarred Cell barred period WCEL
Tcell Frame timing offset of a cell WCEL
Evaluating period for amount of
TCrmax WCEL
cell reselections
TCrmaxHyst Hysteresis to revert from UE high WCEL
Threshservlow Thresh serving low WCEL
Time of Arrival Window Endpoint
ToAWE_CCH WCEL
for
Timecommon channels
of Arrival Window Startpoint
ToAWS_CCH WCEL
for common channels
Treselection Cell reselection triggering time WCEL
Cell reselection triggering time for
TreselectionFACH WCEL
FACH
Cell reselection triggering time for
TreselectionPCH WCEL
PCH
UTRA Absolute Radio Frequency
UARFCN WCEL
Channel Number
URAId URA identity WCEL
UseOfHCS Use of HCS WCEL
UTRAN_DRX_length UTRAN DRX cycle length WCEL
WCELGlobalCNid - WCELPLMNid - WCELMCC Mobile Country Code WCEL
WCELGlobalCNid - WCELPLMNid - WCELMNC Mobile Network Code WCEL
WCELGlobalCNid - WCELPLMNid - WCELMNCLength Mobile Network Code Length WCEL
RACHCapacity RACH Capacity WCEL
GSMCellReselection GSM Cell Reselection WCEL
SIB11Length Length of SIB11 WCEL
SIB11bisLength Length of SIB11bis WCEL
SIB12Length Length of SIB12 WCEL
Threshservlow2 Thresh serving low 2 WCEL
WCDMACellReselection WCDMA Cell Reselection WCEL
PRACH Propagation Delay
PRACHDelayRange WCEL
Statistics Cell Range
Group Description
AC With this parameter it is possible to change the

PIC state of a cell from Disabled to Enabled or
AC This parameter determines the use of low or high
Automatic. There may be restriction in WBTS for
AC This
changingparameter the PICState.defines the If the overload
changethreshold is not for
the
This downlink
possible,
parameterthen thespreading
definesPICState code load. The
remains. threshold
the overload downlink
Parameter for
AC
spreading
WCEL-PICState
the transmission code load indicates
load. isThe
defined the
Load asBased
PICState a quotient of theof
AMR
AC This
reserved
cell. parameter alldefines
and Selection spreading the codesoffset that in the is used to
Codec
calculate Modethe overload feature
threshold uses
of the overload
AC spreading
This parameter
threshold. code definestree on an level SF=128.
offset that isThe used Load to
PtxTotalNCpower.
Based
calculate AMR the Codec
overload The
Mode overload
Selection
threshold threshold
of featurefor
PtxnonHSPA. usesan
AC This
average
the parameter
overload total defines the coefficient
non-controllable
threshold. transmitted which poweris
The
used overload
to calculate thresholdthe overload of PtxnonHSPA threshold isof
AC is
ThisPtxTarget+AMROverTxNC.
parameter
PtxTarget+AMROverTxNonHSPA. defines the offset The Load
which
The based
is
Load used
PtxTotal.
AMR
If
to there Codec
calculateare The overload
Mode
HS-PDSCH
the threshold threshold
Selection codesfor feature
code forpower.
reserved PtxTotal
uses from the
The is
the
AC Based
This AMR Codec
parameter
PtxTarget+AMROverTxTotal. defines Mode theSelection
target
The feature
threshold
Load based uses
for
overload
codeoverload
threshold
the threshold.
tree,isthose calculated HS-PDSCH
threshold. by adding codes the that exceed
parameter
the
AMR
This downlink
Codec
parameter spreading
Mode defines Selection code load.threshold
feature The uses downlink
the
AC the
to minimum
the maximum number downlink oftheHS-PDSCHtarget
transmission codespower forof
are
spreading
overload
the code
threshold.
transmission load
load. is defined
The Load as a
Based quotient
AMR of
AC not
The considered
call.
parameter as
defines reserved an offset ones in
that terms
is used to of
reserved
Codec Modeand all spreading
Selection feature codes uses in the
the target
spreading
The Load code
abased load.
AMR
AC
calculate
spreading
This parameter
threshold.
target
code tree
defines onCodec
threshold leveloffset
the
Mode
ofSF=128.
an Selection
average
that is The used total
Load to
feature
Based uses
non-controllable
AMR the
Codec threshold
transmitted
Mode whenpower.
Selection selecting
The
feature target uses
calculate
spreading
This parameterthe target
factor for threshold
lower codec of PtxnonHSPA.
mode
that isAMR
AC threshold
the
The target
targetthe for thedefines
threshold.
threshold average thetotal
for PtxnonHSPA
offset non-controllable used to
is The
calls.
calculate
transmitted target
power isthreshold
PtxTarget+ of PtxTotal.
AC This parameter defines the underload
PtxTarget+AMRTargetTxNonHSPA. The threshold
Load
target
for the threshold
AMRTargetTxNC.
If there are HS-PDSCH
downlink for an average
Feature
spreading codes Load
code total
based
reserved
load. transmitted
AMR
The fromuses the
AC Based
This
wide bandAMR
parameter Codec
power defines Mode
is PtxTargetthe Selection
underload
+is target feature
threshold
Codec
codetarget
downlink
the Mode
tree, those
spreadingSelection
threshold. HS-PDSCH
code uses load the
codes defined thatthreshold.
exceed
as a
for the transmission
AMRTargetTxTotal.
This parameter defines load.
The LoadThe based Load Based AMR AMR
Codec
AC the minimum
quotient of reservednumber ofthe
and all coefficient
HS-PDSCH spreading that
codes
codes isarein
Codec
Mode
used to Mode
Selection
calculate Selection
feature
the feature
uses
underload the usestarget
threshold the threshold.
of
AC not
the
This considered
spreading
parameter as
code
definesreserved
tree on
the ones
level
offset in
SF=128.
that termsis used The to
underload
PtxTotalNCpower. threshold. The underload threshold for an
spreading
Load
calculateBased thecodeAMR load.
underload Codec Mode Selection
threshold of feature
AC This
average parameter
the total defines
non-controllable the offset that is used
transmitted to
uses
PtxnonHSPA.
calculate
underload
the The underload
underload
threshold.
threshold threshold of for power
PtxTotal.
AC is
The PtxTarget+AMRUnderTxNC.
parameter
PtxnonHSPA indicates which PIC pool the cell
is threshold The Load based
The
AMR
belongsunderload
If there Codec
are
to. Mode
HS-PDSCH
The defaultSelection for Ptxtotal
codes
value feature
ofreserved
the The is
uses
parameterfrom thethe is (CS domain, PS domain, or both) and the Cell Access Restric
AC PtxTarget+AMRUnderTxNonHSPA.
This parameter
PTxTarget+AMRUnderTxTotal. defines the particular The CNLoad
Load domain
Based
underload
code
'Off',
Based tree,
and AMR threshold.
those
it indicates
Codec HS-PDSCH that the
Mode codes
cell does
Selection that exceed
not belong
feature uses
AC Codec
This
the
to minimum
any Mode
parameter
PIC pool Selection
defines
numberi.e. HSUPAoffeature
the
HS-PDSCHthresholduses the
interference for theare
codes UL interference load to start barring access classes. The paramete
the underload
Restrict
underload CS and threshold.
threshold. PS domain: Rel-6 or newer UE is and
restricted from accessing the RAN for bothcell.
CS and PS doma
Low
not offset
considered
cancellation
This parameter value
is as
not is
defines used
reserved
applied in
the or case
in ones
the
window ofin
cell. non-HSPA
terms of cell high offset value for HSPA configured
AC Restrict PS Domain: Rel-6 newersize UE is forrestricted
arithmet from accessing the RAN for the PS domain for all the ACs
spreading code load.
AC Restrict
This parameter CS Domain: defines Rel-6 the or newer UE
difference in istherestricted
DL from accessing the RAN for the CS domain for all the ACs
Restrict
linkloss PS Domain
in relation and
to the /UL Cell Access:
linklossthe Rel-6
when or newer UE is restricted from accessing the RAN for the PS domai
AC This parameter enables disables use an of
external
RRC device issetup
connection used on in the Common BTS. Its value is
Channels
AC Restrict
This CSfrom
parameter
subtracted Domain defines
the andCarrier
power Cell valueAccess: Rel-6
toofinterference
the primary or newer UEs are restricted from accessing the RAN for the CS dom
(CCHSetup).
Restrict
ratio for CS and
Fractional PS domain
DPCH and Cellparameter
(F-DPCH). Access:
The value Rel-6 or newer UE is restricted from accessing the RAN for both C
AC CPICH read from the management
The parameter indicates if rearrangement can be
of the parameter
"Transmission
applied to value
a specificpower is usedof
cell. in
the the
primary estimation CPICH of
AC When
This
Cell
power the
parameter
Access
required of the
Restriction:
by the
determines parameter
new Allthe how
the
HSDPA UEs, is streaming
long set to 1 , must
a the
DPCH
regardless be allocated
of their before it are
release versions, canrestricted
be reconfigured to a better
from accessing thepositio
RAN
channel",
CCHSetup while
is producing
enabled for the value
cell. of
AC user.
DPCCH
The power offset
parameter defines forthe thetimer needs value of the thatUL
The
DPCH guard
triggers open
code time
loop
tree secures
power that a serving
control
optimisation, oritthe
if is HS-DSCH
value
not of cell change or active set update procedure can be executed i
AC The parameter defines the minimum usage of
the Primary
triggered CPICH TX power broadcasted in the
code
The tree otherwise.
before isrearrangement isforapplied to a
AC SIB 5guard
This parameter
for the timeneeds definesnotofused
the if either
threshold
PRACH the
open CPICHvalue
loop of this parameter is 0 s or the value of the WCEL parameter FastH
specific
Ec/No tocell.
determine whether RRC connection
AC power control.
This parameter The
defines parameterthe threshold is applied for ifCPICHthe
setup
value
RSCP is
of allowed
the
to determinemanagementto be performed
whether parameter on
RRCofconnection common
"MHA used"
AC The
is setparameter
channels to the(CCH).
value defines
RRC"Offset theused".
connectionoffset the primary
setup on
setup
CPICH istransmission
allowed to bepower, performed and the on maximum
common
AC common
The parameter
channels channels
(CCH). defines
RRC is not the possible
connectionAMR ifsetup
codec CPICH sets
on which can be used in establishing the CS AMR call over Iur. The p
DL
Ec/No
If transmission
there measured
ischannels
any need power
and tonot of the the
reported
modify reference
by value
the UE service
of istheless
common
channel in DL power is possible
allocation. The if the CPICH
maximum
than
If the
parameter
the value
RSCP value
measured for of
the
of the and this parameter.
adjustment
parameter of If
the
prohibits theDPCCH lowest
the is establishment of the AMR call, RNC can still establish it if the AMR co
transmission
possible
power parameter
offset poweronly,
value ofreported
valuethe the reference
is
by theservice
defined,
effect on in
UE
the practice
PRACH
less
is
than the
calculated value
(in valueof
dBm) this by parameter.
subtracting If the
the lowest
value of AMR codec mode set (12.2, 7.4, 5.9, 4.75) can be modified only
CPICH
open
Note
possible loop
thatEc/No PC
the
parameter value
can beofdoes
reduced
Bit3
value not
is affect
indicatingby tuning
defined, the
the
then channel
the
usein ofofthe
the parameter
type selection
management from the
algorithm
parameter transmission
for SRBs.
"Required power
received C/I
practice
primary the CPICH RSCP value does not affect
CPICH.
on PRACH at WCDMA
the channel type selection algorithm for SRBs. BTS" consequently.
Note! Parameter RACHIntraFreqMesQuant
AC This parameter defines the AMR WB mode sets
which
This parameter are used defines in UTRAN thefor number the CSofAMR allocated WB
AC
call. The serving RNC allocates the largest set of
AC This
the configured parameterAMR determines WB mode the sets, threshold whichlevel are whic
AC the permitted
This parameter determines the threshold level subsets of the AMR WB mode set
received
which from
the uplinkdetermines the MSC
load of the the server source in the resource
cell must
AC This
request parametermessage. threshold level whic
exceed before the The Admission configured control AMR of the WB RNC
AC mode
This
may parameter set isthe
direct a permitted
RRCdetermines connection subset ifsetup
the threshold its modes level
to another are
producing
which
cell withinthe the sector.
downlink
the lowest load AMR
The of WB
the
Admission mode control
source data
cell rates
must
AC This parameter identifies the WRAB object of the c
of
exceed
calculates the resource before the threshold request
the Admission or,
level if the control
by previous
adding of the the kind RNC
value of
AC The
set
may
of thedirect RAN2482:
does not
parameter exist,
the RRC Enhancedit
to the is the
connection Virtual
subset
target value Antenna
setupthat of to has
theanother the
total
Mapping
AMR
cell
received
The WBpower
within
RAN2482: feature
mode
the sector. ofimproves
theThe
(PrxTarget).
Enhanced highest the data
Admission
Virtual performance rate.
Antenna control Version of
AC
VAM
1
calculates
Mapping only by of controlling
the the Iu
featureEnhanced UP
threshold the
support
improves Virtual phase
level mode difference
by
the performance for
adding between
predefined
the value
of
AC The
the
SDU
of the RAN2482:
physical
sizes
parameter is antennas.
applicable to the Thisin
target the parameter
latter
value Antenna
case.
of defines
the Equal
total
VAM
Mapping (Virtual feature antenna improves mapping) the by controlling
performance of the
AC the
maximum
transmitted
The
phase initial
RAN2482: phase
difference permitted
power value
Enhanced when
configured
(PtxTarget).
between the
Virtual
the AMRE-VAM
physical Antenna WB algorithm
mode
antennas.
VAM
starts;
sets
Mapping (Virtual
are otherwise
used
feature antenna thisUL
indefines
the
improves ismapping)
the
andthe constant by controlling
DLperformance
transfer phase of the
offset.
AC This
This
phase parameter
parameter
difference defines
between the
whether number
the code
physical of phase
change
antennas.
directions.
VAM
offsets byneededcontrolling for the phase
phase control difference
algorithm between
procedure
This
This parameter
parameter is performed defines
enables for
the Fractional
time
/ disables for thewhichDPCH
use of (F-
the
AC the
implemented physical antennas.
in BTS. This parameter defines
DPCH)
phase
Thetime
Fractional code
offset
parameter and
is kept how
is (F-DPCH)
appliedat many
the in F-DPCH
optimum
SRNC phaseslot
when the formats
AC the
This
can parameter
be toDPCH
occupied search defines
in for the the and mapping
optimum
allocation phase procedure of
needed
needed
resource
signaling
as input as radio
for input
requestthe for
bearers
phaseis maximum
thecontrol
for phase
RAB
on HSPA when
control
assignment
algorithmin procedure
the algorithm
request
cell. is
of
allowed
implemented
This Fractional
parameter to start.DPCH
at Special
BTS. (F-DPCH) value in
0 the
means RRC that code
AC and
implemented
connection
change
in the target
procedure setupat determines
RNC of thethe
BTS.phase
isparameter
not in
SRNS valuerelocation
the cell.to F-DPCH
targeted
for the Happ
AC hard
When
This handover.
the value The
parameter determines whether theof the parameter is also
is set significant,
toRNC 1 (F-
code.
ifallows
DPCH the resource
functions request
are enabled is received for the in DRNC
cell), the from
When
This the value
the
parameter use ofdefines of64QAMthe parameter modulation
whether theis set fortoHSDPA.
HSDPA 0 64
AC Iur.
system checks if activation of F-DPCH is
If
(Immediate
Users the parameter
perIf Cell F-DPCH is enabled,
feature allocation),
inor thenthe
thedisables the RNC can
system
AC allowed.
This
use
allocates parameter
the feature it is not
F-DPCH enables
HSDPA possible
for the 64 tocell
QAM
Rel-7 and
is
activate
on
enabled
the
newerF-DPCH
useUE
BTS.
or
ofIf
not.
for
HSDPA a new in cell,
the the
cell. activation does not succeed
AC the
that
Parameter parameter
supports is disabled,
Rel-7 F-DPCH
indicates the high speed then the
immediately RNC cannot
FACHincapability RRC
and
use
connection an errorsetup
feature message
HSDPA phase.64QAM. is printed Thisout. parameter can
AC If
The
If this
this parameter
parameter
parameter is
enables set
is enabled to /the'Enabled',
disables
(that is,the then
givenuseisthethe of HS-FA
be
RNC modified
allows on-line,
the maximum but modification
ofthat 64 HSDPA users innot
AC value
applied
The
When 1),
parameter
the the
to value
ongoingsystem checks
connections
enables/disables
of the parameter(that the
the
is set maximum
is, to
use theof1 the (F- direct dedicated resource allocation for HSPA (parameter RABD
the
number cell. of HSDPA-capable BTSs and cells is not
modification
DPCH allocation affects after only RRC new connections).
connection setup),
AC This
exceeded. parameter it isdefines
Ifallocates not possible the Establishment
to Cause
If
the
If
(EC) the
64 parameter
system
HSDPA
values users
which is set
per
prefer as
F-DPCH cell disabled
new is notforactivate
DL the(default),
enabled
high UEspeed
HSDPA
in HS
the RACH capable (Rel8) UE is kept in high speed common chann
AC fororder
This
In
immediately a parameter
newtoBTS guarantee
after or cell,
defines
RRC athenfull
message the
the utilization activation
Establishment RRC of HSDPA
the isCause (EC) values which prefer new high speed common channels (
cell,
common
unsuccessful then the
channels RNC
and an allows
(HS error FACH) only
is printed 16 or
usageout. 48 for Rel7
Establishment
64QAM
Connection
This parameter modulation,Setup Cause the
Complete
determines is RRC
value is information
whether of the
received the HSPA and element if which is received from the UE in the RRC message RRC Co
AC users
UEs.
This per cell. In
parameter this
isisthat
also case,
used to
to establish
indicate whether128 users per cell feature is enabled in the cell or not. If this fe
HSDPA-
MaxNbrOfHSSCCHCodes
If
UE
16 the has
or parameter
indicated
48 network.
HSDPAdetermines usersset as
it supports
peris cell parameter
enabled, arecanRel-7 is
dedicated
allowed, F-DPCH. resource
seeto allocation is tried for PS data of interactive and backgrou
AC An
This
capable
The Establishment
parameter
value 1 means Cause
This that information
certain an RRC
whether information
the
Establishment beHSPA sent Cause prefers high
supposed
RRC
If
the
element
72 this connection
feature
status
users which
per
to
of the be
is
cell
2
not
isRNC
at
setup
received
feature
the
enabled, minimum,
phase
management isfrom the
enabled
runs RNC
the UE
and
on common
allows
parameter
in in
the the cell only
or 16, 48, 64 or 72 speed
HSDPAcommon channels
users per cell (seeinHSDPA48UsersE
the RRC connec
AC the
feature
0
channels.
This UEs
(Disabled):
parameter (HSDPA
RAN853 High cell
(HSDPA
defines speed indicator)
the code
common
HS-PDSCH and the
multiplexing)
channels UE
codeare is to
set.preferred for HS RACH Capable (Rel8)UE on Cell_FACH state
HSDPA
RRC
not.
displays message48it for users the RRC enabled Connection Request.
The
be
If
User the
(HSDPA48UsersEnabled).
value
supported
HSDPA
amounts 0 means incan
dynamic a endcell that
also
user.
where
code
becertain WhentheEstablishment
allocation
restricted feature with HSDPA
the Cause prefers
following SRB mapping to the dedicated channel (DCH) or
parameters:
AC The
HSDPAEnabled
64QAM parameter is enabled. defines
is set If to the
HSSCCHCode required the
enabled, number system
number ofis
1
When
functionality
-The (Enabled):the
WCEL-MaxNumberEDCHCell
value value Direct
cannot
1channelization
means of dedicated
thebe
that parameter
usedaacertain or resource
it is
is set allocation
to
deactivated,
Establishment 2 (F- for HSPA can be applied for HS RACH Capable (Rel8) UE on
free
If
verifies
Bit
1,
Parameter this
9:
thenSF128
feature
that
Emergency
the theis enabled,
utilization
indicates PowerSaveHSPAType
call is
the does not high codes
maximum
not
always
speed left
effect, the for
of
RACH is72
SRBs
best other
setcapabilto emergency call are always mapped to DCH in the RRC connect
of
AC DPCH
the
-HSDPA
The
Cause code allocation
set
WBTS-MaxNumberEDCHLCG
systemprefers contains
also high along
checks speed with
just thatone user
common the code plane
maximum amount
channels (5).
in
than
either
possible HS-PDSCHand
HSPA5 because 72 or use.
HSUPA The
NoHSPA05ReConf
of the users number
relationship canF-DPCH beof free
supported
betweenin for codes
order
AC allocation),
-If
number
This
the the HSDPA
parameter
RRC the
WCEL-MaxNumberHSDSCHMACdFlows
of BTSs
connection system
dynamic capacity
determines setup. allocates
code value allocation
the of
use HSDPA
of Extended 64 theAcquisition Indicators (E-AI). TRUE indicates that E-AI is used
after
per
to
The
number the
cell.
enable
parameter ofHS-PDSCH
HSDPA
HS-PDSCH in used
FDPCHSetup code
a cell. codes upgrade
When defines
and the has
the allocation to be procedure of the F-DPCH in the RRC connection setup.
UE
functionality
-Users
The after RRC
WCEL-MaxNumberHSDPAUsers
per
original Cell can
AICH connection
be
feature signature is notsetup
and it is
exceeded.
space along
activated,
can with
beIf the user-
isthe
itextended fromi 16 signatures (as defined in Rel99) to totally 32 signa
AC equal
PowerSaveHSPAType
This
HSSCCHCode or
parameter higher than
determines
number the is parameter
set
defined theto HSPA0,
use
in value,
of
standard Common TS E-DCH
plane
code
-exceeded,
When
The allocation
set
the
value contains
WCEL-MaxNumbHSDPAUsersS the
E-AI
0 means isif
system UE
more
used, that has than
sends indicated
indication
a certainone
an code that
appropriate
is signaled
Establishment it
amounts. to BTS by NBAP:PHYSICAL SHARAED CHANNEL RECONFIGU
otherwise
If
HSDPA
The
25.212 this feature
parameterwill
(chapter the not isHS-PDSCH
not
be enabled,
configured
HSFACHRABDRAEnabled
4.6.2.3 code the
Channelization to upgrade
aRNC cell, allows
even is
code-set notifonly
definesres when direct resource allocation of the dedicated channels fo
AC supports
In
This
-Cause
HSDPA this case,
parameter Rel-7
WCEL-MaxNumbHSDSCHMACdFS
64 this
Users F-DPCH.
parameter
determines State defines
the transition
maximum also toE-DCH
the
allowed.
16,
HSDPAEnabled
mapping).
CELL_DCH
minimum 48, prefers
or Also,
64
and state
ifSRB
HSDPA
maximumisper
the set
and
Cell
mapping
number
users
to allowed
DCH
feature
oftofree
per
enabled.
allocation
the
cell. configuration
numbers
dedicated
codes
Infor
This this iscase,
isSRBs valid
of HS- is
AC error
channel
lower
This
see
when and
than
parameter
the thestatus the
(DCH) theparameter
Power ofor
value to the
determines
the
Saving of
RNC the value
dedicated
Mode parameter,change
theconnection
management Maximum
for BTS to
highperiodical
speed
featureperiod for
allocated
PDSCH
It
'Enabled'
packet is recommended
access immediately
codes.
is not allowed.
channel to in(HSPA
have RRC features i.e. on Continuous
HS- setupisPacket Connectivity (CPCEnabled) and Fractional DPCH (FDP
HS-PDSCH
parameter
either
For active
example, HSDPAcode
orif downgrade
inactive
the 64
feature usersin the
RAN1470 can
enabled
RNC. be initiated.
(HSUPA
AC phase.
This parameter
DSCH/E-DCH) in the RRC For determines the
connection avaliable setup.sub channel numbers used with HS-RACH. When the HS-RACH is us
(HSDPA64UsersEnabled).
2ms
Code TTI)
amounts is activated, that can then be there
used HSUPA is feature
in room
this users,
inHSPA the per cell and CPC (enabled with parameter WCEL-CPCEnabled)
AC Note:
This
This
see Simultaneous
parameter
parameter
the status has
ofdetermines
the usage
noRNC effect ofthe HSPA
if
management the
Additional 128 users
E-DCH tr
code
All
When tree
cases, the for
0),
value 14
1) HS-PDSCH
and
0000 2), 0000shall codes
be
0000 run is(there
only
set, ifisthe
the RRC not
value
parameter
72
Bit
parameter Users
9: Emergency Perdepend Cell
HSUPAXUsersEnabled. isonactivated
calls active
are not features
to the
affected, and
cell
Using with
SRBs of is same than indicated in the IE Available Sub Channel Num
the
AC always
This
information
maximum enough
parameter element
capacity room
is used forto15
Establishment HS-PDSCH
define whethercause codes
Ifthe
isthe in
parameter
emergency
HSUPAXUsersEnabled, call are licensed
HSPA72UsersPerCell. always the
for the
mapped
RNC
RNC.
to DCH
allows 3,service in
12,
the
RNC
interpreted
feature codeallows tree
HSDPA to thedue
mean usage
15
has no to the
that
Codes of additional
it
effect 16QAM
does
is not not
in
if the the E-AGCH
modulation
prefer
use,
feature the code
code for
AC This
the
24, orparameter
RRC 60Ifconnection
HSUPA enables setup. / disables use HSPA of E-
.set
HSUPA.
128 This
establishment depends
contains
Users the
Per just on5users
parameter
signalling
Cell how
fixed
iscell.
per
the
activatedon
codes. BTS.
isadditional
enabled,
common If
tothe thethen E-AGCH
channels.
feature
cell with the
DCH
This 2ms
parameter TTI in the
defines the16QAM limit tree). forfeature
the amount
AC code
RNC
HSDPA
the
When
is allocated
can
parameter
the 15use Codes
value the from
ofHSUPA
is in the
HSPA128UsersPerCell.
the use
parameter
code
with 10 isHS-PDSCH
set towith in
1,of atheof
Information
User
active amounts
HSUPA about can
users parameters
alsoin a be cell in operating
restricted the with
process the this:
AC However,
cell.
codes
This parameter
User If the
(with
parameter
amounts if there
parameter
HSDPA can is
defines onlyis
cell
also the one
disabled,
upg HS-SCCH
from
maximum
be restricted then
5 to the
10 code,
downlink
with RNC
codes
thethe user
HSUPA
The
following
determining 2parameters:
msthe TTI functions
FDPCHSetup
usage of HSUPAare enabled
defines 16QAM the for with
then
cannot
license),
following it isuse not
the thepossible
maximum
parameters: HSUPA tocode allocate
16QAM amount 14 HS-PDSCH
feature that incan a cell. be
AC cell.
allocation
This
-used
both parameter
MaxNumberEDCHCell
fixed procedure
and defines
flexible ofUL the
theRLC. F-DPCH
maximum It is in
also the
uplink used RRC userto
codes
The HSUPA
in due the
-- MaxNumberHSDSCHMACdFlows toset the
16QAM is relationship
10. is
If allowed
the featurespecified
in the
HSDPA cellin the
if the
15
If the
connection
bit rate parameter
allowed
MaxNumberEDCHLCG
determine setup.
the in
fixed isaenabledcell
UL RLC for (1),
an PDU NRTthesize system
PS domain
with MAC-
standard
MaxTotalUplinkSymbolRate
-The parameter 25.212. In
defines
with 15 thethis case, has
maximum it is
valuepossible "3"
amount to
AC Codes
checks
RAB.
-code
es.
isthat
MaxNumberHSDPAUsers in use
It flexible
is13not
MaxNumberHSDSCHMACdFlows
For the license
applicable
UL RLC:
HS-PDSCH
of tothe
If thein HSUPA
HSDPA
codes
2ofULms TTIof
(with
DCH
allocate
indicating
-HSDPA
The release
MaxNumbHSDPAUsersS
feature is
parameter cellthe HS-PDSCH
active upgmax
actions from
(statesymbol
RABDRAEnabled allowed
10"On" tothe
codes. rate
15
and
amount
ofaexist).
codes 5760
codelicense),
defines If
active
kbps.
treenot,
when this
return
-the channel.
MaxNumberHSDPAUsers
HSUPA users code in a cell is applied
lower than or
before maximum rearrangement
-- MaxNumbHSDSCHMACdFS.
is informed
direct resource by appropriate
allocation amount is that
configuration
for HSPA to this
can forbeequalcode
theused
error UE
to
tree.
inis
MaxNumbHSDPAUsersS
the
the threshold,
set isafter15. RAB defined by this parameter, the
and
allowed parameter
- MaxNumbHSDSCHMACdFS.
HSUPA 16QAM value
usage setup changeis comes.
allowed to enabled with flexible is notUL
allowed.
RLC
If the PDU maximum size. For code fixedvalue ULisRLC: 10, the If the amount
The
of cell-specific
active HSUPA
recommended code set contains 5, 8 and parameter
users in a CPCEnabled
cell is lower thanis10used or
to
equalenable/disable
codes. to the threshold the feature
defined Continous
by this Packet
parameter,
Connectivity.
the fixed UL RLC PDU size must be 656 bits.
AC This parameter defines the maximum number of
HS-SCCH
Parameter codes defines, (SF 128) that
whether anycan externalbe reserved devices
AC
in
suchone as cell.
a TX amplifier or RX amplifier or the
AC Parameter enables / disables the use of HSDPA MI
combination of such devices is used in the BTS
AC More
Each
that either than
cell inthe one a PIC HS-SCCH
referencepool has code
point one ofcan the be
state. TX used ifare th
There
the HSDPA
characteristics code multiplexing functionality is in
AC This
use. parameteror the RXthe
defines characteristics
power offset is moved
between
from the antenna connector of the cabinet port to
AC The
the far parameter
end antenna identifies connector. the downlink When the scrambling
The
code
parameteractual
of the number
Primary
is set to 'Offset of reserved
CPICH (Common
used', codes depends
Pilotof the
AC For the interference domain, this the parametervalue
on for
Channel)
management example of the HSDPA
Cell.
parameter All capabilities
the ADJD
"Cablethat Loss" and
object isHSDPA
defines
For the the minimum
interference capacity
domain, this is allowed
parameter for
AC code
instances
subtracted multiplexing
in from the traffic
same
the support
power RNC, (RNC defining
ofcell thewithoutand
primary BTS).
this CPICH cell as
the
defines uplink DCH
the maximum in the
capacity for in the throughput
AC target,
The
defined
considering shall
parameterin the have
the antenna the same
defines
received the
connector
wide value
maximum band their
target
of interference
cabinet Primary
wide
port ban
based trafficCode
Scrambling load that
parameter. is allowed Note: forChanging
the uplinkthe
when
for
When the the CPICH
throughput
adding power
based is applied
traffic load. for the
The UL
AC DCH
parameter traffic in a
value the WPS cell.call
starts Thebearer, parameter the estimated
introduces
open
parameter
received
a
loopnon-controlable
protection
power
introduces
margin
controls athe
against
ofcell
safety
power DPCH
the
shutdown
margin
can
possible
and forPRACH.
exceed theits
AC procedure
This
Cabinet
received parameterport in
interference the
power BTS.
defines the power:the
CPICH maximum
it is
definesdefined how with close the
target
estimation
transmission (Target errors for received
power in the ofthe the power)
interference
cell. The bymaximum
the value
based DCH of
AC management
to
The
this the planned
planned
parameter parameter
target
maximum
before "Transmission
interference
downlink
cell is transmission
considered power power to of
be
resource
transmission allocation. power If the
isThis
the received
maximum noise power
the
caused
power primary
overloaded
level of
issum bya the CPICH
radio
in
overestimated, own
the link. channel".
cell
uplink. DCH
and users isvalue
parameter
because ofallowed
is used
that
forinto the
AC This
linear parameter of the defines
power maximum
of all downlink power forthe
physical TPC
increase
the downlink
interference without ofpower changingallocation the network
when stability
the CCTrCH
AC
bits
channels
When
This
when
of Fractional
the
parameter that
value istheofDPCH
allowed
defines
DCH
the
users
(F-DPCH).
to
parameter
minimum be is underestimated,
used is Value
power in ato
set of
cell.
for the
'Offset
TPC
maythe
includes
itparameter result permitted
one is toor more
overload
subtracted
DCH DCHs load
which
from of RNP
is achieved.
interactive
means parameter possible or When
used',
bits
the of then
DCH Fractional value ofclass
DPCH the IE Primary
(F-DPCH). CPICH
Value ofTX the
AC Parameter
loss in thetraffic
background
PtxPriCPICH
The maximum
traffic
defines
uplink which
load the
coverageexceeds
defines RABs.
maximum and the
constant The
the threshold
allowedallocated
network
power HSDPA for
power,
parameter
defined
power which
of with
a is
radio istransmission
aparameter,
subtracted
the part
link of from
cannot thethe power
System
RNP
exceed RNC of thevalue
Information
parameter
theapplies cell isof
the
transmission
stability.
primary
the
This minimum
parameterWhen
CPICH power.
of the
to
the DCH RNC
achieve
defines two sends
trafficfinal
parameters:
power load theexceeds
signaled
offset value
PtxCellMax
to tothe
value.
E-xxCH the
AC Block
PtxPriCPICH
interference
this 5,
parameter. is produced that
based The defines with
power
parameter the
constant
estimationsmanagement
isE-AGCH,
set power in the
separately for DCH
BTS
threshold
If
andvalue
power inoffsets
HS-PDSCH,
of defined
the
MaxDLPowerCapability parameter
for with
E-DCH HS-SCCH,
theTTI isparameter,
equal
(the
2is ms to
maximum value
case. the E-
IfRNC
of
E-BTS the
AC parameters
primary
resource
for
This each CPICH
parametercell. "Transmission
allocations.This to achieve
parameter
defines the power
final
power the of
signaled the CPICH
planned
offset value.
to E-
RGCH
initiates
parameter
power
DCH TTI and
UL E-HICH
overload
PtxFDPCHMin,
capability).
isthe 2offsets
ms, The
the Total
control
RNC
value PowerBTS actions
signals
of this IE of
deactivates to
the the reduce
BTS NBAP: isthe
the
channel"
If value
maximum,
xxCH
PHYSICAL ofand
power not
SHARED
"Cable
parameter
the Loss"
physical
for the
CHANNEL
as
is E-DCHequal
limit. defined toparameter
value
soft inhandover
theof the
AC uplink
power
This
minimum
added PS
control
parameter
to interactive
value
the of as
signaled HSPA
definesthe and DL
power
maximum
value background
control
of offset
E-AGCH channels.
to
transmission DCH Fractional
power
description
parameter
case. If(F-DPCH) of
UEthe
thePtxFDPCHMax, former
is power
in E-DCH parameter.
BTS
soft handover deactivates (that
RECONFIGURATION
traffic.
DPCH
power
offset, in Maximum
E-RGCH power REQUEST
Transmission forcontrol
offset E-DCHand message
Powersoftstatic
E-HICH handover
IEpower (TS
(TS
AC power
Parameter
is, a
25.433). control
non-serving is of HSPA
applicableE-DCH DLto RLS the HSDPA
exists) channels.and F-
case.
25.433).
offset.
resource If UE The is RNC
allocation. in E-DCH uses
Itmeans
is thesoft
the
ignored handover
minimum (that
value is
as
AC DPCH
Themaximum
When value
non-serving
the
does
adding -not
0 E-DCH 'OFF' exist
atransmission
WPS -RLSin
bearer, exists),powerthe in
connection,
that the the
estimated
theof
case
theofvalue
throughput
value
the cell.
of
this
HSDPA
of this
based uplink
transmitted dynamic
parameter resource
is
DCH overload
non-controllable added allocation.
to the
control
power signalled
is not
can value
used.
exceed
AC parameter
Planned is
maximum added to the
transmitted signaled code power NBAP value
of the
of
its
of the
target
Initial E-AGCH(Target
DL Transmission power
for transmittedoffset, Power, E-RGCH power)
Maximum power
by the DL
radio
The
offset,
Parameter link
targetand for value
E-HICHthe
defines PS
of thestreaming
power
the transmitted
target offset. RAB.
scheduling The
non-HSDPA
AC value
Power of andthis parameter
Minimum DL before
Power. the cell is
parameter
power
threshold defines
(PtxTargetHSDPA)
for thepower maximum can be code
exceeded power
It is by of
AC considered
Thisradio
the parameter link toHSDPA
forbedefines
overloaded
the real thetime
allocation.
in
maximum the
services, downlink.
value
when for the
value
applicable of this
to target parameter
the HSDPA static before resource the cell is
the
CCTrCH dynamic
considered includes
toRNC bedefinesapower
DCH
overloaded ofused the ininfor PS
the CSstreamingservices
AC This
allocation
and
parameter
PS in
conversational and the
ignored
services
minimum thedownlink.value
case
(non-controllable offorIf
traffic
the
HSDPA class
averaged
dynamic dynamic RAB. PtxNonHSDPA
target power
resource used exceeds
allocation. for CS or equals
services
AC This parameter defines the reference service for
load).
PtxTargetHSDPA
and PS conversational + PtxOffsetHSDPA,
services depending
(non-controllable
producing
This parameter the maximum defines code power
whether one, value
two oroffour the
AC on
load).the
Depending setting on the of the parameter
setting of the HSDPAPriority,
parameter
radio
Dynamic
antennas link. Reference
target
are used power in aservice
theis used
receiving is used
when in
there
direction planning
are
AC overload
HSDPAPriority,
This
the
SRBs parameter
downlink
or
control
coverage
conversational
actions
either
gives the targeted
unique
of totalcell.
the
services
either
transmitted
identifier
The
(non-
to
to HS-
ratio aofin
carrier
sector
the of the base station where the cell belongs to. The RNC use
the
DSCH
Dynamic
power cell. or The
MAC-d target
the RNC flows
total power selects
or is NRT
non-controllable usedtheDCHs Eb/No
when are set
there
transmitted started.are
AC primary
controllable
This
parameters CPICH
parameter load) code in
definestothe power
the cell, to
which
offset the maximum
are
value for the mapped
SRBs
power
It isthe
code or
has
recommended
power toaccording
conversational
of be the below to set
reference
this
orservices
equal
Transmissionparameter.
service to(non- is power of primary CPICH channel (PtxPrimaryCPICH) and Offset of the
to
DPCCH
controllable
This
HS-DSCH
parameterSIR when
load) transport
in
defines thethe radio
cell,
the
channel.
link
which
Establishment has are andefined
Dynamic E-DCH
mapped Cause
AC PtxTargetHSDPA
with
target the powermanagement varies before the
parameter
between first HS-DSCH
"Offset ofvalue MAC-
the P-
configured.
to thevaluesHS-DSCH The BTS
transport adds thethe
channel. minimum
parameter
AC
(EC)
d flow
CPICH
This canandbe
parameter
(PtxTargetTotMin)
which allocated
reference definesprefer
and in
service
thethe faster
the cell.
powers".
Establishment
maximum If Dynamic
dedicated at least Causeone
to the
target
channel result
power(DCH) of the
variesfor measured
between
SRBs in the DPCCH
theRRC minimum SIR
connection value
HS-DSCH
(EC) values MAC-d
which flow
prefer is allocated
SRB mapping in the cell,
AC (PtxTargetTotMax)
when
This itEstablishment
is used
parameter
(PtxTargetTotMin) in UL
defines value,
load the depending
estimations
value on
forPtxTarget
the forto
the the
E-DCH
RRC mix
setup.
PtxTargetHSDPA
common
of services channels
mapped isand used
(CCH)
to
the
Cause
DCH
maximum
instead
in is RRC
the
and RRCof
HS-DSCH
information
connection as
resource
information
(PtxTargetTotMax)
element scheduling.
which element is received TPC
value, command
depending
from the UEerror
on the
in rate
the mix
AC a target
RAN1908:
setup.
transport of PtxnonHSDPA
UE DRX However,
Establishment
channels. inCause
Cell_FACH in NRT DCH
isnon-controllable
RRC feature
information enables discontinuous reception (UE DRX) for High Speed Cell_FAC
target.
of
RRC services
scheduling.
As a Information
message
precaution mapped RRC
the element
to DCH
Connection
RNC defines
reportsand HS-DSCH target
Request.
Not UE error
DRX The capable unless it has a confirmation from the BTS and can repor
AC element
load
This
rate caused
parameter
for which
the by
TPCthat is received
services
defines
commands mappedfrom
the maximum the to
ofnon-controllable UE
DCH
certain UE that is in the
transport
value 0 channels.
means However,
the corresponding
RRC
transport message
transmission channels power RRC Connection
must
level still stay
a(F-DPCH).
UE can Request.
below The of
AC utilizing
load caused
Establishment
This Fractional
parameter by Cause
definesDPCH
services prefers
themapped 3.4
maximum touse
kbps DCHThe onvalue
dedicated
value
PtxTarget.
DPCH.
the 0
parametermeans
It is signaled that
represents the
to corresponding
UE in
ratio the betweenMaximum failed
transport
channel
transmission channels
for SRBs power inmustthe
level still
RRCthat stay aconnection
UE below can use setup.on
AC Establishment
This
allowed
TPC parameter
commandsUL TX Cause
defines
power
andof prefers
IE
all theofparameter
TPC SRB
amaximum
proper
commands. mapping
RRC to
PtxTarget.
The
PRACH. value The 1 means
value that the the corresponding also effects
the
The
message,dedicated
power
transmission margin
whenCause channel
power aand between
radiolevel (DCH) that
link maximumis13.6or
PtxCellMax
a UE to the
setprocedures.
up. can high
and
use on
AC This parameter
Establishment
the cell selection defines the
prefers kbps number of simultaneous HSPA conversational users that are admitted pe
speed
PtxTargetTotMax
PRACH. packet
The value access of reselection
is needed (HSPA,
the parameter tothat protect is, on theHS-
also already
effects
dedicated
Thecell parameter channel for
enables/disables SRBs in the RRC
AC DSCH/E-DCH)
admitted
the services
selection in andthe
mapped RRC
reselection to the the
connection highVoice
procedures. setup.
speed Call The Prior
Users
connection
The valuecounted ofsetup.thehere If the
parameter are CS
13.6 kbps voice
is DCH
sent over
toisthe HSPA
preferred
UE in users and push to talk (PTT) users. One CS voice over HSPA use
AC value
transport
Pointer 1 means
to channels,
the in WACthat by
object corresponding
giving time
identifier.of Defines for the the
one
the for SRBs
Cell
Establishment selection the
Cause and RRC connection
re-selection
prefers SRB setup but
System
overload
The
The value
maximum
control
of the to adjust
parameter
number
PSis DCH
of HS-SCCH sent mapping load
to thebefore
codes UEistoin defined with the parameter WCEL-MaxNbrOfHSSCCHCodes.
setup
Information of
common it faces
Block
channels congestion,
3 of the
in the servingsetup
RRC is
cell. retried
connection
the Cellhigh selection
priority HS-DSCH
and re-selection load is affected.
of System
immediately
setup. Bit 9:Block with
Emergency 3.4 kbps call DCH. does not effect,
HC Information
Thisvoice
CS parameter over HSPA 4 ofisthe
determines enabled serving
the minimum
with cell. thedefines required
WCEL-HSPAQoSEnabled parameter.
The
SRBs parameter
ofEcNoemergency SRBMapRRCSetupEC
is used callfor are cell always selection mapped and re-
to
CPICH
Optimized
preferred push
channel level to that
talk
type the
experience
in the inter-frequency
RRC is enabled
connection RACH with the RNFC-PTTEnabled parameter.
selection
DCHparameter
The in the in RRC idleismode. connection
used for cell setup. selection and re-
measurement
setup, either result
common ofor the target
dedicated cell must
channel.
The
selection
exceed parameter in connected
before SRBBitRateRRCSetupEC
the blindmode inter-frequency (PCH, FACH). defines
handover
The
the parameter
preferred bit FDPCHSetup
rate for the SRB defines DCH allocation
if
is possible.ofThis
procedure the parameter
F-DPCHinstead inisthe applied RRC WCEL-is
DCH
ifconnection
selected to
RACHInterFreqMesQuant be preferred defines that EcNo of CCH in theis
setup.
RRC connection setup.in RACH.
measurement quantity
The parameter FDPCHSetup defines allocation
procedure of the F-DPCH in the RRC connection
HC This parameter determines the minimum required
CPICH
This parameter RSCP level is used that to the give inter-frequency
weight to the cell
HC
RACH
in making measurement
the HSDPA result
layering of the target A
decision. cell must
HC The
exceed parameter
before indicates
the blind whether or not handover
inter-frequency thebiggerDC
value
HSDPA in capability
the same based sector handover in a different is layer than
enabled in
HC is
The
in possible.
parameter
another This parameter
identifies the
cell potentially is
brings applied
measurement
more HSDPA if WCEL-
the
RACHInterFreqMesQuant
control cell. defines that RSCP is
HC users
The toparameter
parameter this cellenables/disables
thanset in (FMCS the other object)thecell.use controlling
of the
the
the measurement
intra-frequency quantity
measurements in RACH. of acell.
user
directed
The
Enables DC RRC
HSDPA
/ disables connection
capability
the use setup
based
of the in the
handover
Directed can
RRC
HC having
This DC
parameter HSDPA isthe allocated.
used inHSDPA
the RRC Connection
be
connection used to direct
setup for DC
the HSDPA capable
layer UEs
in the cell. to
HC Request
This
the DC parameter and
HSDPA state transition
determines
capable cell,iffrom a serving
which Cell_FACH
can HS-DSCH act asto a
Cell_DCH
cell
primary change servingphases
procedure HS-DSCHwhencan makingbetostarted a decision during in
HC This
When parameter
Multi-Band defines
Load after timecell:
Balancing trigger is is value toin
enabled
which
anchoring - from layer
the the
immediately
DCH HSDPA
layer, phase capable the UE
intra-frequency directed
activate
the
This cell and
for
parameter RAB deactivate
setup
indicates HSPAwith loadthe state due to
HC to.
measurement
DL - from
load. the HSDPA/HSUPA event 1A orwhether 1Clayer triggered the
which
Faster
ASU Activation of Target Serving Cell functionality is enabled in the cel
cannot
MBLBRABSetupEnabled
When enabled in the parameter,
cell,whetherthis functionality the introduces faster activation of target serving cell
HC procedure
This
support
functionality DCwithout
parameter HSDPA,
behind
waiting
indicates or parameter
this
a new measurement
theis not Faster applied Completion of SCC Procedure functionality is by applying
enabled HSPA
in the cell Sd
The
report
When formula
to
enabledtrigger to calculate
the
in the cell,serving thethis absolute
HS-DSCH
functionality CFNcell with
introduces this new ATO
faster value
completionis the following:
HC In
in
This
Absolute
change.
- from
case
the the
cellofCFN
parameter DCactivation
an
anymore. HSDPA
=indicates
cell
AT - HSPASCCSpecificATO
which
ofwhether
HSPA can
load
or not only
state the act
dueFastas HSPA Mobility feature of SCC procedure
is enabled by including
in the cell. Before thethe Dela
feature
a secondary
to DL load, theserving
parameter HS-DSCH defines cell. how long the
HC where
This
The AT = Completion
parameter
Faster the activation
identifies ofthe time,
SCC which
Measurement
Procedure RNCishas notproduced
applied ifinternally
either thefor a synchronised
value of radio is
this parameter link handling proce
"Disabled" or the
DC
DL
When HSDPA
total the Capability
transmission
Fast HSPA Based
power
Mobility Handover
(PtxTotal)
feature ismustis based
enabled in the cell, it is possible to make use of the following paramete
A
Control
on
exceed new
the measurement
Parameter
HSPA
the Capability
level that Set report
(FMCL
Based
triggers is the
required
object)
Handover.
HSPA toloaded
which trigger
HC This
The parameter
Faster defines the bit rate threshold that
the
controls
state serving theActivation
checking HS-DSCH
inter-RAT
in the cell.
ofcell
(LTE) Target
Ifchange
Serving
measurements.
that level during Cell is not applied if either the value of this parameter is "Disabled" or th
is the
HC -the
This
anchoring WCELmaximum
if the
allocated
- ActivationTimeOffset
parameter defines
value of
user
thethis bit bitrate
rate
parameter
on
threshold is that
Operator
exceeded
downlink
-the WCEL can
- DPCHfor the choose
ATOSRBsOnHSPA timefrom
cannot period
exceed,thedefined
following
so that with options:
the this
inter-
"Disabled".
This maximum
parameter allocated
defines user
how provided bit
many rate UEs in the uplink
HC parameter,
frequency
-DPCH WCEL orthen the HSDPA
inter-RAT
- SRBDCHFmcsId (GSM) handover bitare rate in
is
(0)
selected DC cannotHSDPA
in each exceed, Capability
period so to that
an Based the
HSPA inter-frequency
Handover
capability
HC the
possible
- WCEL
This cell is due evaluated.
to
- SRBHSPAFmcsId
parameter high
defines If the
downlinkthe timeHSDPA DPCH provided
(in seconds) power bit
level.
or
disabled
based inter-RAThandover (GSM) handover
procedure. The is possible
required due
number to
rate
The
- VCEL
when is below
highest
the - SRBDCHFmcsId the
value
periodical threshold
of the
HSPA (which
parameter
Capability means (512
Based that
kbps) DL
HC high
This
(1)
of UEs uplink
parameter
Periodical
cannot DPCH power
determines
triggering
necessarily level.the
enabled
be The
minimum
selected highest if value
interval
suitable between serving HS-DSCH cell changes when the periodical C
bit
-represents
Handover rate
ADJS of
- NRTall services
the
SRBHopsIdentifier
procedure supported
iskbps) mapped
started. bit to
rates
PeriodicalHSDPA above are
384
of
(2)
candidates theEventparameter based
are not (512(inactivity)
available. represents
triggering
Note that all the
enabled
the
HC overly
kbps.
This
-supported
triggering ADJD restricted
parameter
- AdjdSRBHopsId
of the ), the
determines cell is set
thekbps. to
averagingthe HSPA load
window for the periodical CPICH Ec/No measurement reporting, whic
This
(3)
number
state. parameter
Both bit rates
periodical
ofSRBHopsIdentifier
UEs isHSPA
in aabove
overruled Capability
and event
compressed 384 if Fastbased
Based
mode HSPA Mobility
(inactivity)
due to is enabled in the serving HS-DSCH cell with the WCEL param
HC -This
Handover VCEL -
parameter is not active
determines in this cell
the reporting if the parameter
period of the CPICH Ec/No measurement, which is used as a criterion
triggering
service
This and
parameter enabled
load, or HSPA Capability Based HO
- WCEL
has the value 0.is overruled if Fast HSPA Mobility is enabled in the serving HS-DSCH cell with the WCEL param
- HSDPAMaxCellChangeRepetition
HC reason,
-In
The case
WCEL is
of
parameter- limited
a deactivation
HSDPASRBWindow with thethe
identifies ofRNP the parameter
HSPA load state,
measurement
This
Periodical
MaxNumberUECmSLHO. parameter triggering is overruledcan belong if Fast
used inHSPA any Mobility is enabled in the serving HS-DSCH cell with the WCEL param
cell,
HC -the
control
Parameter
The WCELparameter
parameter
parameterdefines
HSDPACPICHReportPeriod
is applied set
identifies
how
(FMCG
alsothe in case time
object)
measurement of MIMO same
controlling
irrespective
condition
the inter-system must of the
not HSDPA
trigger and
HSPA HSUPA
loaded capability
state. If
-control
Capability WCEL parameterBasedmeasurements
- HSDPACPICHAveWindow Handover
set triggering
(FMCI and
object)of a controlling
DC-HSDPA user having
HC of
The
This
the
HS-DSCH
-the the
WCELHSPA cell.
parameter
parameter Periodical
load
allocated. identifies
is
state
- HSDPAServCellWindow used due alsothe
to DL for of
measurement
MIMO
load the is DC HSDPA
Capability
not
Capability inter-frequency Based Handover. measurements of controlling
a user
Capability
control
Based
- WCELHandover parameterBased Handover
set
and thenofis
(FMCS applicable
object) to the
HC triggered
Enables
having -/ long
HS-DSCH
enough, theDC-HSDPA
HSDPACellChangeMinInterval
disables allocated. use HSPA
HSDPA Capability
load state
layering isfor
DC
the
Based
-canceled. WCELHSDPA
intra-frequency
Handover.
- capable
FastCompletionOfSCC UE
measurements using either of HS-DSCH
a user
UEs
This in commondetermines
parameter channel features the maximum in the cell.
HC or
having
- VCEL DCH. - Event
HS-DSCH based
FastCompletionOfSCC triggering
allocated. (inactivity)number is of repetitive serving HS-DSCH cell changes during a predefin
HC applicable
This
- WCEL parameter to the DC
determines
- HSPASCCSpecificATO HSDPA capable
the maximum UE using
allowed difference between the CPICH Ec/No of the best active set c
When
This Multi-Band
parameter is Loadoverruled Balancing if FastisHSPA enabled Mobility in is enabled in the serving HS-DSCH cell with the WCEL param
HS-DSCH.
-This VCEL - HSPASCCSpecificATO
HC the cell for the state transition phase with the
parameter determines the maximum allowed difference between the CPICH Ec/No of the best active set c
This
- WCEL parameter
MBLBStateTransEnabled is overruled
- FastActOfTargetServCell if Fast HSPA
parameter, this Mobility is enabled determines in the serving HS-DSCH cell with the WCEL param
HC The
When
This RNHSPA
Multi-Band
parameter parameter Load Balancing
defines an HSDPACellChangeRepetitionTime
HSDPA isbitenabled
rate per in the time period during which the maxim
-This
parameter VCEL -
parameter FastActOfTargetServCell
is notisapplied. overruled if Fast HSPA mobility is enabled in the serving HS-DSCH cell with the WCEL param
the
-NRT
The WCELcell
user
RNMOBI for event
in the phase
cell under
parameters
- PowerOffsetUpdMsgSize triggerwhich with thethe
HSDPACPICHReportPeriod cellmaximumis set to and HSDPACPICHAveWindow (or the corresponding W
HC This parameter
MBLBInactivityEnabled defines an offset
parameter,wide to it is band
HSPA
-transmitted
VCEL load state
- PowerOffsetUpdMsgSize
wide ifband
the transmitted
target power that is per
used
HC The
This
recommended
power RNMOBI
parameter
is high parameters
todefines
enough. disable an DCHSDPACPICHReportPeriod
E-DCH HSDPA bit rate
capability and HSDPACPICHAveWindow (or the corresponding W
- WCEL
for HSPA - load
HSPwrOffsetUpdateDelay
state checking. If the transmitted
NRT
based
- VCEL
This user
handover in the defines cell
- HSPwrOffsetUpdateDelay
parameter withunder this which
anparameter
offsetthe thethe
to cell to
(set is setvalue to
HC wide
the
0). band
HSPA power
load state is higher
if the than
received summaximum
wide of
band the
-maximumWCEL
received - DirectSCCEnabled
wide band target power that
HC This
power parameter
is- high transmitted defines
enough. wide band power
a threshold at is whichusedthe
and for
-value
HSPA VCEL load
of DirectSCCEnabled
this state
parameter,checking. the If the
HSDPA received provided wide bit
HSUPA resourcedefines indications canthe set HSPA the cell to
HC -This
band
rate RNC parameter
must - RRCConnSetupMsgSize
power be ischecked.
higher than whether
Ifthe the the sum of
HSDPA-provided of limited
noise
the HSPA load state. If number
HC -Capability
bite
The WCEL
power, rate the
parameter-for Based
DefMeasCtrlReading
maximum
NRT Handover
users
identifies received
is lower is enabled
wide
the measurement than band
the in the power cell.
HSUPA
HSPA resource
Capability status Handover
Based indications received
can be used from
-control
andWCEL the
threshold, -
valueCodeTreeOptimisationGuardTime
parameterthe of
cell thisis parameter,
set to the HSPAthe E-DCH
load state.
the
This BTS
parameterdivided byset
indicates (FMCS
allcapable
HSUPArange object)
resource controlling
status
HC for
the moving
provided bitthe
intra-frequency
indications rate
received
HSPA must be the
measurements
from checked.
BTS
UE
is
toof
equal Ifof
the the
E-DCH
a user
or
HSPASCCSpecificATO parameter during anchoring. Range is from 0
desired
higher
If too
frequency
provided
The high
parameter value
layer.
bite rate is applied,
Operator
for
indicates NRT can timing
users
if incoming choose
is of lowersynchronized
from
ISHOthe than thethe
from LTE SCC procedure
is enabled is jeopardised.
in the cell ...or not.
HC Recommended
having
than HS-DSCH value and isE-DCH-1 dB. allocated.
If toothis
following
threshold,low parameter
value
options:
the cellis applied,
is
value,
set to
the
the
RNC sets
synchronized
HSPA load SCC state.
cell
procedure is delayed.
HC to
This
(0) the
HSPA HSPA
parameter load
Capability state.
defines Based the Handover
target frequency disabled for layering in RRC connection release.
This
After parameter
the modification affects ofalso the feature
parameter, SRVCC theif new from LTE and CSFB with HO. SRVCC functionality is activated in th
The
(1)
This HSPASCCSpecificATO
Periodical
parameter triggering enabled is not applied either theConnection
value of VCEL parameter FastActOfTargetServCell
in the cell. Layering inisRRC
"Di
HC Recommended
value
Recommendedis used fordefines value
newgiven is
is -1
whether
connections. dB. the layering in RRC Release is enabled
The frequencies
(2) Event basedvalue are
(inactivity) 0.7. in UTRA Absolute
triggering enabledRadio Frequency Channel Number (UARFCN) format, which defin
HC This parameter defines the threshold for the DL
(3) Both
Target periodical and
frequencies and event frequency based ranges(inactivity) are defined with parameters under LayeringRRCConnRelTargFreq st
NRT
Default
This capacity
value
parameter 0request
definesrejection
means that UE is
the threshold rate nottodirected
forstart theand UL to other frequency in RRC Connection Release due to Layering i
HC triggering enabled
stop
NRT the
capacityactivation request of load-based
rejection rate handoverto start and
HC This parameter
procedures. Thedefines NRT the delay
capacity requestbetween rejection
stop
detectingthe activation
Periodical triggering
'NRT load ofbased
canload-based used handover
behandover in any state cell, over
rate is
procedures. defined The as NRTa quotient
capacity of rejected
request capacity
rejection
irrespective
in this cell' andof the HSDPA
broadcasting and thisHSUPA information capability
requests
rate is cell.
definedand all as capacity
aother
quotient requestsof rejected (and capacity the base
of the
inside the Periodical
RNC to triggering
entities of
that thecontrol HSPA
load)
requests during and the measurement
all capacity requests window. (andisthe In case of
Capability
handover Based
procedures. Handover This is applicable
information to base
used theto
the
load) Inter
during Circle the Roaming
measurement feature, the
window. In case of
HSDPA/HSPA
detect whether value capable
or notisa 80% UEcandidateusing DCH. Event
target cell is in
recommended
the Inter Circle Roaming feature, and above. the
based triggering
a load-based handover state. (inactivity) is applicable to the
recommended
UE using HS-DSCH. value is 80% and above.
HC This parameter defines the delay between
detecting
This parameter 'Hard blocking defines the load delay based between handover
HC
state
detecting over in this
'Interference cell' and load-based broadcasting handover this
HC This parameter
information inside defines
the RNC the delay to other betweenentities
state
detecting over'Downlink in this cell'spreading and broadcasting code load-basedthis that
HC control
This
information handover
parameter inside procedures.
defines
theinRNC a base This
to other load information
for
entities the thatis
hard
handover
used
blocking to state
detect
measurement over
whether this
or
of cell'
not a and
candidate broadcasting target
HC control
This
this
cell
handover
parameter
information
is indetect
a feature.
load-based
procedures.
defines
inside the thethe
handover RNC
load-based
This
threshold to information
other
state. forentities
the cellis
handover
used
based to hard handover blockingwhether The ratio value
or not of
tohysteresisa this
start and candidate parameter
stop target
HC that
This control
isparameter
represents
cell in a of the
load-based defines
minimum procedures.
the
handover number ofThis
state. hunting time the for
activation
information
the capacity is load-based
used
request to detect
rejection handover whether
rate procedures.
or
measurement not athe
HC attempts
This
The parameter
hard of cell-specific
blocking definesratio the
is hard capacity
hysteresis as a time during for aof
candidate
to start
measurement target
load-based cell
window. is The
handovers. in adefined
load-based
total Load-based
number
quotient
handover
ofcell-
hard
the
state.
This blocking
number
parameter of measurement
hunting
defines attempts
thestarted to
hysteresisstart
indicating load-based
time forofan
HC handover
hunting procedures
attempts are
of cell-specific hardifprocedures
thecapacity result
handovers.
specific
interference hardLoad-based blocking
load measurement and handover
the rate total
to number
start load- of
HC the
during
This
are capacity the
parameter
started if request
measurement
the defines
result rejection
ofthe window
the hysteresis
hard measurement
isblocking
reached time for bya
hunting
based
exceeds attempts
handovers.
the threshold of cell-specific
Load-based and remains hard
handover therecapacity forthe the
adding
downlink
measurement
during the parameter's
spreading
the measurement exceeds code value
the reservation to
threshold
window. the The sum rate
and total of
HC This
procedures
requested parameter are
hysteresis defines
started time. the
if the Inminimum
result
case of interactive
the Inter
rejected
measurement
remains
number true
there
of hunting hunting
to traffic
for start
the attempts
loadbased
requested
attempts of and the
handovers.
hysteresis time.
and
Circle
This background
interference Roaming
feature,
defines level
thethe forcell-specific
exceeds the
recommended
number measurement
theUEs
of
hard
thresholdvalue
that
HC successfully
Load-based served
handover true hunting
procedures attempts.
are
capacity
of
and the
is 1s.
are remains
simultaneously
during
packet there the
scheduling measurement
for
in athe success
requested
load-based
window
rate for the if
started
hysteresis
inter-
is
the
This result
parameter of the downlink spreading code
HC reached
load-based
time.
frequency
reservationIn case by adding
handover of defines
handover
measurement the the Inter the
value
feature.
procedure. Circle number
exceeds
ofThe thevalue
Roaming of UEs
parameter
the
of
threshold
that
the
feature,
are
the
This simultaneously
LHOHardBlockingBaseLoad
parameter
recommended
parameter represents defines in
value a the loadbased
the is minimum
1s. to
threshold the inter-RAT
sum
number
for of
the the ofDL
HC and remains there forattempts
the requested hysteresis
handover
rejected
packet
interference trueprocedure.
scheduling hunting
load to resourceThe
start andrequired and
requests
stop number
the
the that
activationhaveof
The
time.
This required
In casenecessarily
parameter number
of defines
the Inter of UEs
Circle cannotRoaming necessarily feature,
HC UEs cannot
successfully
been
of served
load-based served
successfully
handover truethe be
hunting threshold
inselected
procedures. a measurement attempts. for
ifThe the
suitable UL
be
the selected
recommended
interference
candidates ifload
are suitable
not to value
start candidates
available. is
and 1s. stop
The are
the
load-based not
activation
HC sample
This
parameter
available. period.
parameter defines
The The
defines
load-based thetotal the
offset number fromofthe
threshold
inter-frequency processed
for
planned the
of load-based
inter-RAT
resource
reservation handover
requests
rate handover
of is
DL feature
reached procedures.
spreading is by notadding active
codes The toinstart
the thisvalue
HC target
handover
This
parameter level,
parameter PtxTarget.
feature
defines isthe
defines not active
an
offset averaging
from inWhen thisthe cell
window
planned ifload-
the
cell
of
and if
this the
stop parameter
parameter
the activation to value
the ofsum is 0.
of
load-based the rejectedthe
handover true
parameter
size for an value NRT is 0. When
capacity the load-based inter-
HC target
based
This
resource level,
inter-RAT
parameter
procedures. requestsPrxTarget.
Thedefines handover
DL and anrequest
the
spreading feature
averaging
successfullycode
rejection
is reservation
active,
window served
rate-
the
frequency
based
recommended load handover
measurement
value feature
is 2. to
Note is
stop active,
that load-based
the the number
size
true
rate
This for
resource
is a
defined
parameter hard blocking
requests.
as a
defines quotient measurement
anInter of reserved
averaging window to stop
and all
HC recommended
handovers.
of UEs in the value
Incompressed
case ofisthe 2. modeCircle due toRoaming
service
load-based
spreading
size for the handovers.
codes in the spreading code tree on
HC feature,
This
or load parameterthe interference
reason recommended
isdefines
limited an load
with value measurement
averaging
the RNP is 4 seconds.window
parameter
to
level
stop
Note SF=128
load-based
that the during
number handovers. theof measurement
UEs Inin case
a of
compressed window.
the Inter If
size
therefor
MaxNumberUECmSLHO.
This are the
parameter DL spreading
HSPDSCH defines codes an code
In case
reserved
averaging reservation
of the from
window Inter rate
the
HC Circle
mode Roaming
due to servicefeature, or the
load recommended
reason is limited value
measurement
Circle
code
size for Roaming
tree, an those
NRT tofeature,
stop load-based
HS-PDSCH
capacity this
request parameter
codes handovers.
exceeding
rejection defines rate- In
HC is
with
This
case 4 seconds.
the
parameter
of RNP
the Inter parameter
defines
Circle an
Roaming averaging feature, window the
the
the
based number
minimum load of UEs
number
measurement that of are
HS-PDSCH simultaneously
to start load-based codes in
are cell
MaxNumberUECmSLHO.
size
load for
recommended a
triggered hard blocking
value
inter-RAT is 4measurement
seconds.
handover or to
downgrade start
HC This
handovers.parameter
not considered If the defines
as reserved
value anthis
of averaging
ones parameter in terms window isofset to
load-based
procedure.
size for an Ifhandovers.
theload.
interference InterIn If the
Circle
load value
Roaming
measurement of ths feature to is
HC spreading
zero,
This the
parameter code
corresponding defines an case
load-based of
averaging the Inter
handover
window Circle
parameter
active,
start the
load-based is set
recommended to zero,
handovers. the value corresponding
IfWhenthe is 3.
value of is load-
this
Roaming
trigger
size for isthe feature,
not DL used the
spreadingin this recommended cell.
code reservation value
this rate
HC based
This
parameter handover
parameter is set trigger
defines
to zero, is
the not
thecoverage used
corresponding in this
of SRBs cell. on
85%
measurement
measurementand above. is active,
to HSPA
start the
load-based recommended handovers. value If
When
HSPA
loadbased this measurement
within the
handover serving
trigger is active,
is cell
not the
when
used in thethis
HC is
This
the 15value
recommendedseconds
parameter of the or 10 seconds
defines
parameter
value is 15 theseconds.is in case
coverage
set to zero, of
of the theInter
E-DCH
CPICH
cell.
Circle
TTI When
2ms EcNo
Roamingwithinthismeasurement
measurement
feature.
the HSPA serving results
is active, cell of when thetheserving the
HC corresponding
The
cell parameter
are not known. load-based
enables This the handover
is seconds
usedSmart during LTE triggerHandover
theserving is not
state
recommended
CPICH
used in EcNo
this cell. value
measurement
When is this15 results
measurement or the
of 10 is
HC (WCDMA
transition
seconds
This parameter to LTE
from
incase ofhandover)
CELL_FACH,
definesInter Circle inCELL_PCH
the for
Roaming cell. and
feature.
cell
active, are not
the known.
recommended Thisthreshold isvalueused during
is 15duringWCDMA the
seconds state or
URA_PCH
Cell HSDPA
transition from to load CELL_DCH in of
CELL_FACH, Measurement state CELL_PCH and Based LTE
and
HC 10
The seconds
incoming parameter PSSmartin case
defines Inter
whether
the Circle
triggers Roaming
redirection
to be used for
Layering
CELL_URA
feature
without
the Smart
or
.measurements
LTE toISHO. the
Handover:
LTE Downlink
CELL_DCH Handover.
(Smart
coverage
stateLayering)
LTE andisduring or
HC measured
This
an parameter
incoming as the
PSchange ratio
defines
ISHO. Cell_DCH of the
the maximum
Downlink Primary coverage CPICH
number is of
redirection
T1:
code
UEs RRC power
that state
are with
and measurements
transmitted
simultaneously carrier
in (Measurement
a topower.
compressedCCH SRBs
HC System
measured
This
Based parameter
LTEchecks as the
Layering) whether
ratio
defines of
is athe this
usedthe parameter
Primary
maximum
forconfiguration
different numberto
CPICH is set of
T2:
will
mode
specialHSDPA/HSPA
be inestablished
the
value cell'0' due
or to
in
to DCH/DCH
tothe
value HSPA
critical
other CTS
handover
than 0. If E- it isif
code
UEs
triggers.
T3: CS power
that RAB are and transmitted
simultaneously
release carrier
in a DCH power.
HC This
the parameter
power
measurement
set to special ratiovalue defines
exceeds
reason. the the
Critical maximum
valuehandover of the number load of
reasons
DCH
compressed
The
T4:
UEs
TTI
triggers
Periodic
that
2ms
are mode
must is
trigger be
simultaneously in'0',
possible the then
enabled if the
cell WCDMA
in due power
with
an to
HSDPA acellratio
service- is
or
HC parameter.
are
not
This
exceedsquality,
checked,
parameter the If the
coverage
and
value parameter
UEs
defines of and
the arethe has
immediate
redirected
maximum
parameter. value If / 0
IMSI-basedthen
handed
number
the only
of
load-based
SmartLTELayeringEnabled
compressed handover,
mode inon HSPA
thethe cell capability
parameter.
due to based
If a trigger
a critical
SRBs
ones.
over
UEs
parameter to
thatonLTE DCH
are has system is possible.
simultaneously
value 0,Cell_DCH Ifbasis
the
in an parameter
of HSDPAreceived has
HC handover
is
This
T1:
valuenot
RRC
handover enabled,
parameter
-25dB,
or
state Multi-Band
measurement
then the
defines
change value
SRB's ifthen
Load
defined
reason.
on
only
Multi-Band
HSPA
Balancing E-DCH
by
to
Critical
is the
Load
CCHalways
10ms
means
measured
compressed
TTI
Handoversis possible. results.
mode If the in when
the
parameter cell due hasto ais non-critical
value -25dB
LTELayeringMeasActivation
Balancing
the case
handover
possible.
The
This capacity
parameter iswith
where
reasons enabled
of
compressed
UE
this
definesareis transferred
related
category whether
ismode
inactivity
toignored.
cannot tomeasurement
quality,
the CCHbe
HSPA detected
state.
used load by
HC handover
then
reason. E-DCH
Redirection measurement
Service- 2ms
without TTI
and is
load-based
measurements reason.
always possible.
handovers,
or with the
in
any Cell_DCH
coverage other
information and
handover state.
(used immediate If this
reason. parameter
IMSI-based
If the is
capacity enabled,
handover. of this
HC If
HSPA
Thisthisparameter
measurements parameter
capability isinset
based
defines
can
Multi-Band
to if value
handoverMulti-Band Load
other and Balancing)
than
Multi-Band
Load 0, and
Multi-Band
T2:
of
the HSDPA/HSPA
category
the
cell cell isisLoad
load used,
distributed
determined tobe
Balancing
the chosen
DCH/DCH
abovementioned
inside
through
is done as
the CTS follows:
RNC. with
available meanshandover
This the
Non-critical
Load
Balancing
handover Balancing is
basedhandovers
enabled Handovers
on (CM)due can to use
with
mobility
measurements only
compressed the
in capacity
Cell_DCH
on
HC case
The
This
reasons
same
HSDPA where
capacity
parameter can
information
power HS-DSCH
of
'steal'
perthis
defines category
free
isNRT is tried
whether
capacity
distributeduser, isto
cannot
also be
Multi-Band
from
equal switched
inabe orcase used
category
higher to
by
ifLoad
any
of
mode this
state.
(0):
Cell_DCHT1-T3Ifdedicated
can this use only
parameter
redirection
state. category.
the capacity
is
without Non-critical
enabled, of
measurements this
Multi-Band handover
dedicated and
DCH/DCH
any
Balancing
that
of
than other
is
Multi-Band
valuededicated with
handover
is(no enabled
Load higher
high for reason.
in bit
service-
Balancing
load) the rate
of If
RAB and
this than
the
triggers 0
capacity
setup
load-based
parameter kbps. phase. of, this
If
then
HC reasons
This
category.
Load
T4 parameter are
Balancing
redirection The Service-
withdefines
capacity
isthe done and of
measurements. whether
with load-based
thismentionedcategory
handover Multi-Band handovers,
can
based Load
be on
category
enabled,
handovers.
(MBLBRABSetupEnabled,
UEs
HSPA are is
not
capability used,
Multi-Band
redirected based above
Load /handovers Balancing
handed over and is handover
done
toMulti-
LTE with
Balancing
taken
(CM)
(1):
Changes
T3:
This T1-T4
CS by RAB
parameter inis
critical
measurements enabled
redirection
therelease handover
parameter
defines for
onwith
trigger the reasons
ifCell_DCH multi
measurements
aremeans
Multi-Band applied RABthat
state.
the Load in
inare
case the
HC reasons
blind handover,can
MBLBStateTransEnabled,
system.
Band Load 'steal'
Balancing which free iscapacity
Handoversbased on from the
with aRACH category
RAB
coverage,
upcoming
where
Balancing setup
an may UE phase.
quality,
inactivity
is enabledhas CS If
fast enabled,
detectedmoving
RAB
in state and and
UE
events at
transition if
in
least parameter
HCS,
in Cell_DCH
one
to and
HC that
This is
measurement
limitdedicated
MBLBInactivityEnabled,
This
compressedparameter from
be
mode. is for
exceeded
used non-critical
the
The source
to or
temporarily
MBLBMobilityEnabled)
enable
capacity HSPAtarget
or
of disable
this cell.
when
category a
WCEL-MBLBRABSetupEnabled
immediate
Changes
Where:
state.
active
Cell_DCH PSenablein
RABIMSI-based
the
state. parameter
andIfcell.
thisthen reasons.
CS
parameter are RAB appliedis
Thisis also limit
in
released.
enabled, enabled,
is
handovers.
Note!
new
is
If
can enabled
the
individual
be To
soft
availablehandover
taken UEin the
and blind
HSDPA
bychange branch
WBTS
critical handover
If any
power added
Periodic
handover of per based
above to
NRT this on cell
triggering
Measurements
reasons user source
that is
HC Multi-Band
allowed
upcoming
T1:
This RRC
Multi-Bandparametertostate Load
exceed
inactivity
Load Balancing
definestemporarily
detected
Balancing Cell_DCH
whether is
isUE done
when
events
done theto with
a new
in
CCH
MIMO
with blind
Cell_DCH soft
cell
belongs
for
are measurement
parameter
less MDTthanto
related
handover,
handover an
and
value
(features
to
which
branch RRC this
(high
coverage,
is RACHIntraFreqMesQuant
connection
parameter
RAN2778
based
added load) quality
to onof
this RACH that
iscell
this andnot is
parameter
Periodic in layering
enabled
immediate
belongs a tothe
state.
T2:
HSDPA
When
T4:
(new
This
should HSDPA/HSPA
PeriodicthisCapability
frequency
limit bemay parameter
set Trigger
be
to given)to
Based
exceeded
value DCH/DCH
isRSCP.
means which Handover
enabled, the iscell
temporarily
Blind CTS
case
basedHSPA iswhereenabled
on capability
whenRACH theain
compressed
HSPA
then
IMSI
measurement
the RRC load
measurements
Measurementhandover. connection mode.
information
Report
from theareand
that of
source isthis
initiated
RAN2496
in a or forishandover
target
compressed not
redirecting
Minimization
cell if the /
T3:
the
based
UE CS
cell.
remains
measurement
new
based soft RAB
HO, MIMO MIMO
handover
onTests).target release
longer HSDPA
from cell capability
than
the
branch Capability
the
source
measurements addedbased
time Based
HO
specified
or target
to is this and
cell.
cell
enabled byDC- the
distributed
handover
of
UE
mode.Drive
is in theinside
Cell_FACH UEs theto or RNC
LTE Cell_PCH meaning
system. state, that or HSPAwhich
T4:
HSDPA Periodic
Handover can
capability trigger
belayering
used forHO moving asource
isMIMO-
parameter
Note!
belongs
when
load
This
is based
To
this
information
limit
enable
to an
isparameter
on allowedRRC
periodic ofbased
RNC-LTEPeriodicTriggerTimer
connection
this
to isexceed
CPICH
based
enabled.
cell are
isRSCP not on
that not
available
temporarily
donein a in
measurement
in
cell
for
when
the
capable
case
Cell_DCH of
measurement,
compressed UE
inactivity to
state. mode.the MIMO
detected
RACHIntraFreqMesQuant frequency
in Cell_DCH layer. state.MIMO
should
Multi-Band
If
ifa the
Following
newUE
the value
soft is is Load
of
in details
handover Cell_DCHBalancing
parameter about
branch state. decision
isBitmask
set added to
The tooused.
to making.
low,
supportedthis then
cellis If
When
HSDPA
be set
Changes the
tothe Measurement
Capability
value
in the RSCP. Based
parameter Layeringbased
Handover
are LTE
based
applied layering
is based
on target
in on
the
most
belongs
multi HSPAof
RAB to load users'
the
combination information
RRC available
connection
is NRT distribution
HSDPA that
RAB(s) power
is is
in
with a per
enabled
the
cell
It is HSPA
upcomingmeasurements
not inCapability
possible the cell,
RAB to
setups. WCEL-
is
use Based
enabled
the Handover.
compressedwhen this mode
activated,
user
Bit 7,(NRT)
compressed
incoming CallAMR HS-DSCH
Type shall
mode. be higher,
Selection
RAB and E-DCH
setup. Itand
works inprovided
the
is possible UEs
following shallbitway: not
LTEPeriodicTriggerTimer
parameter
when the UE is enabled.
has an0are HS-DSCH/E-DCH defines the timeto UE
rate
1.If measurements
be redirected
Bit
activate 7 thehas / handed
value
functionality also
over
(False)(Off); activated
to
for different LTEMDT system. in the cell.
initial
HC This parameter identifies the Measurement
Control
This parameter Parameter Set (FMCG
identifies object) which
the Measurement
HC
controls
Control the
Parameter inter-RAT (GSM)
Set (FMCI measurements
object)Parameter which of a
HC Identifies
non-real the Measurement
time (NRT) radio Control
bearer.
controls
Set (FMCS the object)
inter-frequency which measurements
controls the intra- of a
HC This
non-realparameter time (NRT)defines radio the parameter
bearer. set (PFL
frequency
object) which measurements
controls thewhetherof a non-real
preferred frequency time
HC This
(NRT) parameter
radio bearer. indicates the Power Offset Update Message Size Optimisation functionality is enabled
layer
When definitions.
enabled in These
the cell, definitions are usedintroduces to
HC The
select parameter
the correct definesfrequency thethis primaryfunctionality
layer for and thethe UE,
message size optimisation for RRC: PHYSICAL CHANNE
HC secondary
based
ThePower on the
parameter target UEdefines systems
capability ofand
themessage RRC
primary theconnection
service
and the thatoptimised if either the value of this parameter is "Disabled" or the
The
redirection if Offset
the Update
establishment cause size is is not
the UE
secondary is using.
target systems of RRC connection
HC The parameter
Originating defines
Background the
Callprimaryor cause and the
Terminating
redirection
secondary if the
target establishment
systems of RRC connectionis
HC Background
The parameter
Originating Call in the
defines the primary
Conversational received Call ormessage
and theRRC:
Terminating
redirection
RRC CONNECTION if the establishment cause is Detach
HC secondary
Conversational
The
in the parameter
received
target Call
defines
message inREQUEST.
systems the
the ofprimary
RRC:
RRC
received RRC
The message
and
parameter
connection the
value
RRC: has
redirection
RRCtarget the following
ifCONNECTION
the establishment meaning. REQUEST. cause is
HC secondary
CONNECTION
The parameter systems
REQUEST.
defines thethe of TheRRC
primary connection
parameter
andmeaning. the value
Emergency
The parameter
redirection if call
the inestablishment
value thehas received message
following
cause is RRC:
has the
parameter
secondary
RRC following
CONNECTION value
target meaning.
primary
systems REQUEST. target
of RRCThe system
connection
parameter
HC The parameter
Originating high defines
priority the primary
signalling orand the
Terminating
secondary
redirection
value
parameter has target
if
the
valuethefollowingsystem
establishment
primary meaning.target cause
system is
HC secondary
high priority
parameter
The parameter target
signalling
value systems in
primary the of
the target RRC
received connection
system message
0 none
Originating nonedefines primary and the
secondary
redirection
RRC:
secondary RRCCall ifInteractive
target
CONNECTION
target
system
the establishment
system
systems
Call
of
or Terminating
REQUEST.
RRC cause connectionisThe Inter-
HC 1
The
0 GSM
Interactive
parameter
parameter
none 3G
value
none in
definesthe received
primary the target
primary message
system
andmessage RRC:
the
RAT
0 cell
parameter
none
redirection change
value
none
if the order
has the
establishment in the
following received
cause meaning. is Inter-
2
RRC 3G
secondaryCONNECTION GSM REQUEST.
system ofREQUEST. The parameter
HC 1
RRC:
The
1
RAT
GSM RRCtarget
parameter
GSM
cell
3G
CONNECTION
3G
systems
defines in the
the primary
RRC connection
and The
the
3
value
0
2 none
3G
parameter hasre-selection
redirection the
GSM if none
none
valuethefollowing
establishment
has the meaning. received
following cause message
meaning. is
secondary
2
RRC:
4 3G RRC GSM
nonetarget
CONNECTION primaryof
systems target
RRC
REQUEST. system
connection The
HC The
1 parameter
GSM
Originating 3G
low defines signalling the primary or and the
3
secondary
redirection
3
Thus, GSM
parameter
secondary if the thepriority
ifnone
target
none
value
value
target
system
establishment
has 0the
isprimary
systems then following
RRC
target
of RRC cause Terminating
meaning.
connection
system
connectionis MBMS
HC 2
low
4 3G
priority
parameter
The parameter GSM
none signalling
value in
primary the received
target system message
0
ptp
4 none
RB
3G
redirection
secondary
redirection
3
RRC:
Thus, GSM RRC
request
ifif the
nonenone
is
target
ifnone notdefines
the inestablishment
CONNECTION
value donethe
system
is 0 then
theall.
received
at primary
REQUEST.
RRC
message
If thecause
and the
value
connection isThe RRC:
is
MBMS 3 or 4
secondary
1
RRC
Thus, GSM
parameterCONNECTION
the target
3G
value
value system
systems
is 0 REQUEST.
then
primary of
RRC RRC
target Theconnection
connection
system parameter
HC then
The
0
4 3GRRC
parameter
none
reception
parameter
redirection inconnection
nonenone
is the
value not defines
received
has
done is
the at not
the messagetried
primary
following
all. If to and
RRC:redirected
meaning. the RRC to
0
2
value none
redirection
3G
secondary
an
1
Thus,
hasGSM
redirection
alternative
GSM
CONNECTION if the
none
ifis
the the
target
3G radio
value
establishment
following
not done
system
REQUEST.
is access
systems
0 then
meaning.
at all.
of If the
system
The
RRC RRC cause
the value
value
if
parameter
connection
is Call
the
connection
is
is 3
first
or
or 4
re-
3value 4
HC then
The
1
3
then RRC
parameter
GSM
establishment
RRC connection
3G
none
connectionindefines
the is
received
is not
the
not tried
primary
tried to
message
to and redirected
redirectedthe
RRC: to
to
0
RRC
has none
connection
redirection
2 3G
the
redirection
parameter GSM none
ifis the
following
value not redirection
establishment
meaning.
done primary at all. is failed.
If the
target cause value
system is is 3 or 4
an
2
RRC
4 alternative
secondary
3G
parameter
an CONNECTION
alternative GSM
nonetarget
value radio
radio access
systems REQUEST.
primary
access of system
RRC
target
system The ifif the
connection
system parameter
the first
firstRRC
HC The
1
3
then parameter
GSM
Registration
RRC 3Gin
none
connection defines
the received
is the
not primary
message
tried to and RRC:
redirectedthe to
secondary
RRC
value
Thus, GSM
secondaryconnection
redirection
3 has
if the target
ifnone
the thefollowing
value
target system
redirection
establishment
is 0 then
system meaning.RRCis failed.
cause
connection is
RRC
2
4 3G
parameter
an connection
CONNECTION
alternative GSM
nonevalue radio redirection
systems
REQUEST. primary
access of isRRC
The
target
system failed. connection
parameter
system
if the value
first
HC The
0
4 3Gparameter
none
Originating
redirection nonenone
is defines
Streaming
not establishment
done the
Call
at all. primary
or Terminating
If the and
value the
0
has
Thus, none
redirection
3 GSM
the
secondary
RRC connection ifnone
following
ifif the the
value
target meaning.
is
system0
redirection
systems then RRC
of isRRC cause
connection
failed. connectionis is 3 or 4
HC 1
Thus,
then
This
1 GSM
Streaming
parameter
RRC
parameter
GSM the 3G
Callvalue
value
connection
3G in the
identifies 0 received
isprimary
then
is not
the RRC
target
tried message
connection
system
to
Measurement redirected RRC: to
Originating
4 3G
redirection noneis Subscribed
not done traffic
at all. If Call
the in
value the is 3
0
2
RRC
an
2
Thus,
none
redirection
3G
secondaryCONNECTION
redirection
alternative
Control
3G
received
GSM
if Parameter
theGSM
none
if
is the
target
message not
radio
value
establishment
done
system REQUEST.
access
Set
RRC:
isprimary at
(FMCG
0unknown
then all.
RRC If
system
RRC
cause
the The
object)value is
parameter
ifredirected
CONNECTION
connection thewhich is 3 or
first or 44
HC parameter
then
This
1
3
value RRC
parameter
GSM
Terminating
has value
connection
the 3G
-
nonecauseidentifies
following is not
the
meaning.target
triedin system
to
Measurement
the received to
then
0
RRC
3 RRC
none
controls
GSM
REQUEST. connection
redirection connection
none
thetarget inter-RAT
isThe not redirection
parameter
done is not
(GSM)
at tried
is to
failed.
Ifmeasurements
all.value thehas valueredirected
theis 3 or to
of 4a
secondary
an
2 alternative
Control
3G
message
4 Parameter
GSM
RRC:
none radio
RRC systemaccess
Set (FMCI
CONNECTION systemobject) ifif thewhich
REQUEST. first
HC an
1
real
4
then alternative
Identifies
GSM
time
3G
following
RRC the
(RT)
none
meaning. radio
3GMeasurement
radio
connection access
bearer.
is not system
Control
tried to the
Parameter
redirected first to
0
RRC
3
The none
controls
GSMconnection
parameter none
thevalue redirection
inter-frequency
value has controls
the is failed.
measurements of a
Thus,
parameter
RRC
Set
2
Thus,
an 3G ifif the
connection
(FMCS
alternative theGSM value
object)
value
radio
is 0
0 then
isprimary
redirection
whichthen
access
RRC
RRCisfollowing
target
system
connection
system
failed.the
connection
if the
meaning.
intra- first
HC The
1
real
4 3Gparameter
GSM
time
redirection (RT)
noneis 3G not identifies
radio done bearer.
at the
all. measurement
If the value is
secondary
frequency
3 GSM
redirection
parameter
RRC
control
2
Thus, 3G connection
ifparameter
theGSM
target
measurements
is none
value
value
system
not redirection
done
is primary
set at all.
0 (FMCG
then
of
target
RRC
a real
isIfobject)
the system
failed. time
value
connection is 3 or
(RT)
controlling
3 or 44
HC parameter
then
The
0
radio
4 RRC
parameter
none
3G bearer. nonevalue
connection
none identifiesprimary
is not
the target
tried system
to
measurement redirected to
then
3 RRC
secondary
inter-system
GSM
redirection connection
target
is measurements
nonenot system
done is not
at all. tried
of a
If the to
user
valueredirected
having is 3 or 4 to
HS-
secondary
an alternative target radio systemaccess system ififcontrolling
the
HC
control
1
Thus,
an
The
0
DSCH
4
then
GSM
alternative
3G
parameter
ifallocated
parameter
none
RRC
thenone
3G
nonevalue
radio
connection
set
is
identifies 0 (FMCI
then
access
simultaneously
is theRRC
not
object)
system connection
measurement
tried with
to the first
AMR
redirected first to
0
RRC
2 none
3G connection
inter-frequency
redirection GSM none
is redirection
measurements
not redirection
done at all. is failed.
of
Ifobject)
the a valueuser having
is 3 or 4
RRC
control
1
speech
Thus,
an GSMconnection
if
alternativeparameter
CS
the 3G
RAB.
value
radio set
is 0 (FMCS
then
access RRCis failed.
connection controlling
HC The
1
HS-DSCH
3
then parameter
GSM
RRC 3G
allocated
none
connection identifies thesystem
simultaneously
is not measurement
tried to ifredirected
the AMR
with first to
intra-frequency
2
RRC 3G
redirection
control connection GSM
parameterisRAB. measurements
not redirection
doneset at all.isIfobject)
(FMCS of a
the value
failed. user having
is 3 or 4
controlling
HC 2
speech
4
an
This 3G
alternative
parameter CS GSM
none radio
defines access how system
manytoUEs ifredirected
the arefirst to
HS-DSCH
3
then
the GSM
RRC
intra-frequency allocated
none
connection simultaneously
is not
measurements tried of with
a AMR
user
3
Thus,
RRC GSM
selected if CS the
connection in none
valueperiod
each is 0 then
redirection to aRRCis connectioninter-
failed.
service-based
speech
4
an
This 3G
alternative
parameter none RAB. radio
defines access system if theare first
HC having
4 3G
redirection
frequency
Thus,
HS-DSCH
ifif the
noneisvalue
handovernot doneand
is 0 athow
E-DCH
procedure.
then all.
RRC
many
If allocated
theThe
UEs
value
connection required is 3 or 4
RRC
selected
Thus,
then connection
simultaneously
RRC in
the each
value
connection withredirection
period
is AMR
0 then
is to
not a
speech
RRCis
tried failed.
service-based
CS
connection
to RAB.
redirected inter- to
HC This
number parameter
redirection of UEs
is not defines
cannot
done atthe all. time
necessarily If the (in seconds)
be
value selected
is 3 or if
RAT
an
when handover
redirection
alternative
suitable new is notprocedure.
radio
service-based
candidates done access
are atnot
The
all. If
system required
the
inter-frequency
available. value
if the
Note
number
is 3
first or 4
that 4
HC then
This
of UEs
After
then RRC
parameter
the
RRC cannot connection
modification
connection defines
necessarily is
of
is not
the
the
not be tried
time to
(in
selected
parameter
tried to redirected
seconds) ifthe
redirected suitable
new to
to
RRC
handover
the
an connection
number
alternative procedures
of radio
UEs redirection
in are
a compressed
access is
started.
system failed.
A service-
mode
ififhandover
the due to
first
when
candidates
value
an
The new
is
alternative
parameter used service-based
are for not
radio new
indicates available. inter-RAT
connections.
access whether Note
system orthat thethe
not first
the Smart LTE Layering feature and/or Measurement Based LTE Layer
HC based
service inter-frequency
or load reason handover
is limited feature
with the is
RNP not
RRC
number
RRC connection
procedures of
connection UEs are redirection
started.
inifredirection
athe The
compressed is failed.
service-based
is failed. mode due inter-
to
T1:
activeRRC
parameter
The in
parameter state
this cellchange
MaxNumberUECmSLHO.
definesisCPICH Cell_DCH
parameter RSCP to
has CCH the
thresholdvalue
HC RAT
service
T2: handover
HSDPA/HSPA orthe load feature
reason to DCH/DCH not
limited active by in
CTS thethis RNP cell if that must be exceeded before Smart LTE Layering can be done
0.
the When
parameter service-based
has the value inter-frequency
0. When the
HC parameter
The
T3: CS
handoverparameterRAB MaxNumberUECmSLHO.
feature indicates
release is active, if thethe redirection
recommended and/or handover is allowed to FDD LTE, TDD LTE or to both of them.
Checking
service-based of CPICH
inter-RAT RSCP can
handover be deactivated
feature is by setting the value 0.
T4:
value
The Periodic
is
parameter 30 s.trigger
defines a user amount
HC active,
The the recommended
parameter is used only valuein those is 30cells s.threshold that must be exceeded before Smart LTE Layering, Measurem
where the Smart LTE Layering, Measurement Based LTE Layering or
HC Real
This default
parameter value for
identifies this threshold
thehere measurement cannot be defined,
control parameterbecause setittodepends
(FMCS on radio
object) networkthe
controlling planning.
intra-frequency
Channel
A user is type counted switch means
in those cells where casesthe whereuser HS-DSCH
in questionishas tried
DCH, beHS-DSCH
switched to
or DCH (E-DCH/HS-DSCH
E-DCH. -->
HC This
If the parameter
too value
small value identifies
isparameter the measurement
used, thenis redirection control
can the be done parameter set
toparameter (FMCS object)
too weak RtFmcsIdentifier controlling the
LTE cell causing identifies
that UE comesintra-frequency
backparam
to WC
If
CS RAB release of thistrigger meansallows "Not defined",
case where an UE VCEL
has CS RAB and at least Based
one active theand
FMCS
If the NRT user amount check the Smart LTE layering, Measurement LTE PS RAB
Layering then CR
or Smart LTER
If the value of this parameter is
Smart LTE Layering is enabled with the SmartLTELayeringEnabled parameter. "Not defined" or the value of the WCEL parameter FastHSPAMobilityEnabled is
LC This
Periodic
Checkingparameter Trigger
of user defines
means
amount the
LTE can maximum
supported
be deactivated increment
UEs, which in the measured
remain
by setting value received
thelonger 0. timewide
than band (by
specified interference
parameterpower in rela
RNC-LTEP
If the recent measurement result received from the BTS exceeds the previous possibly filtered - measuremen
The
Cell value
Realspecific
default 0 -CPICH"OFF"
value - indicates
forRSCP threshold
this threshold that the forfiltering
cannot thebe is disabled;
functionality
defined, thewith
is set
because received wide
onband
radiointerference
the SmartLTELayeringRSCP
it depends measurement
parameter.
network planning.
Cell
If toospecific user is
small value amount
used, threshold for the
then too many functionality
UEs is set with to
might be redirected theLTE
SmartLTELayeringUA parameter.
and there is free capacity in WCDMA
Services
Smart LTEthat the UEistoenabled
Layering be redirected to SmartLTELayeringEnabled
with the LTE can be using are set with the SmartLTELayeringServ parameter.
parameter.
Smart LTE Handover is enabled with WCEL-LTEHandoverEnabled parameter.
LC This parameter defines the value of the
Measurement
Defines the noise Filter level Coefficient
in the BTS for digital
the common receiver
LC
measurement
when there is of
no the
load received
(thermal total
noise wide + band
noise
LC The
power. autotuning
The parameter algorithm of Uplink
isisapplied for noise
the level
figure).
(PrxNoise) Thiscan parameter
be switched neededon or in
off. noise rise
LC measurements
The of the
target value of the total received power
calculations. common measurement
types
(PrxTarget)'Received can defines Total
be Wide Band
exceeded by the Power' and
LC This parameter
'Received E-DCH Power theShare';target forvalue
the the total
latter
of this
type
parameter
wideband before the cell is considered to be
LC means
This theinterference
parameter
overloaded E-DCH
inRAB defines
uplink. load power
Radio factor
the maximum
Access
received
quantity in the
of
target
Bearer
a cell.
is cell.
not
An
valueuplink
If RAN1308 for RT
the or RAN2250
received is nottotal admitted
is wideband
used, if
then the powerestimated
this in
LC admitted
This parameter
non-controllable if the total
defines
power received the
exceeds valuepower of exceeds
the
this threshold. the
parameter
the uplink is
resource applied also
ofallocation for measurements
for of
sum of theis
Measurement
PrxTarget
This parameter
values
also Filter used
defines
this
Coefficient
to the
parameter
calculate
value forthe
bytheandCS common
which
speech
the
the tota
LC 'residual
services. received
APrxOffset
dynamic total wide band power' and 'E-
PrxTarget.
measurement
PrxTargetBTS, ofwhichthe target isisused
transmitted
the
ofto RTWP
firstCS calculate
carrier
overload
is appliedthe first
power. in
LC DCH
the
uplink
This load
resource
isoverload
thefor for
target IC users
allocation
threshold
value onfor
forfororiginal
the
for
total BTS stream'.
speech
andvalue
transmitted RNC:of The
The parameter
threshold BSUL is applied
interference. the measurements
The
Measurement
services
PrxTargetBTS
power in and
a cell. forFilter
= A the Coefficient
establishment
PrxTarget+PrxOffset.
real-time Radio determines
of'Transmitted
Access the link. the
Bearer
LC of
Thisthe
PrxTarget common
parameter is relativemeasurement
defines tocloser
the
how system types
thethe noise
measurement power
amount
Dynamic
is not and of
admitted, averaging,
target is the
ifanfiltered
the which
estimated BTS
to shall
value
non-controllableapplyof for
this
carrier
level,
values power'
should gives and
be 'Transmitted
upper threshold
before carrier
Node for Bpower
the noise
reports of
LC the
This
power results
parameter,
parameter
exceeds of
the physical
less
determines
this there layer
threshold. is measurement
PS
whether non realtime
the before
uplink R99
all
rise.
the codes
The
common not
noise used rise
measurement for
is HS
the transmission'.
ratioof R99 of
the the total
acknowledged The
reporting
data
voice traffic
traffic toand CRNC.
is real Parameter
allowed time to dataoverride is significant
andearlier
the HSPA in
measurement
received
PRACH uplink
preambles Filter
power Coefficient
in atocell system to determines
the noise.
RNC. the
the cell
traffic
scheduled
Default in of
the the cell.
HSUPA BTS, which
Establishment
traffic is
of the applying of
cell. the the
stand
If the Nokia
amount value of averaging, should be
which 3dB below
BTS shallthe Cell for
apply
O&M private
Each
alone
parameter
maximum NBAP
logical
signaling enables 'Radio
cell
transmission recource
link orResource
the a in theservice
single
override,
power. indication'
RNC
then only has
CS an the
the
The results
RNC of physical
distributes layer
reporting measurement
characteristics before
function.
administrative
speech
interference
Identifies can be
power
congestion state,
admitted which
received
management the
in uplink from operator
even
theobject can to
the
uplink
O&M reporting
Node B in to CRNC.
a 'NBAP: Parameter
Common is significant
Measurement in
change.
received
realtime
(CMOB) non-controllable
DCH
which traffic
contains and theinterference
Circuit non-scheduled
Switched exceedsDomain E-
the cell
Initiation
The parameterof BTS,
Request' which
can message. is
be freely applying used for the Nokia
O&M the
DCH value
Specific
private traffic ofisthe
Access
NBAP 'Radioparameter
estimated
Restriction Resourceand"Target compared
information for defining
indication' received
against
for the
any
In
the
Thisthe
power" additional
RNC
dynamic so
parameter longRNW numeric
as
interference configuration
defines the or
RTWPthe text
targetE-DCH format
keepsmanagement
of the information
below
voice
(HSUPA) the
O&M cell.
function.
The parameter's setting always depends on the
related
functionality
dynamic
traffic for the
capability to the
target
for uplinkcell
there value
a local object
may be
defined
admission
cell. (WCEL)restrictions
with in the
this
decission. If thefor RNW
parameter.
O&M The
data. parameter
measurement
unlocking The maximum andis usedreporting
length for reporting
of periods
the field the
of is HSUPA
the 20
override isadisabled, logical cell then (e.g. also incomplete
the estimated
operational
measurement;
ASCII
The characters.
configuration).
RAN2482: state that of is,
Enhanced a cell.
thepower number
Virtualshould of be below
Antenna
O&M received total wide band
measurement
Mapping
the dynamic feature resultsimproves
interference to be filtered
the performance
target before during theof
admitting
O&M This parameter
reporting period defines
must be whether
considered. or not the RAN248
VAM
the voiceby controlling
call. the phase difference between
O&M This
the parameter
physical
Parameter notdefines
isantennas. significant the HSDPA
This ifparameter
the cell capability
has defines
not the for
The
a
the
HSUPA default
local
EVAM cell. value 11 for
capability
configured. means a cell. that an old filtered
O&M The parameterhas
measurement is used the weight for reporting of 97,8% theand HSDPA a
operational
new
This measurement state of a
has cell.the weight of 2,2%. This
O&M Maximum value of the dynamic interference is
parameter defines whether the local cell
is an appproripate
target of the voice service default value is define when with the the
O&M Identifies congestion management object
measurement
management period is 20
parameter ms and the
"Maximum target reportingfor the
(CMOB)
Identifies which
congestion contains Packet
management object Switched Domain
O&M period 1000 ms (50 measurements to be
received
Specific total
Access wideband
Restriction power". information for the
(CMOB)
filtered).
The parameter which contains defines the Radio origin Network
of the last Access
O&M cell.
Regulation
configuration Function
action information
affecting of
the object. the cell. For
O&M This
the parameter
connected indicates
CMOB
A high value of this parameter emphasises the object whether the the
"Restriction cell in
question
group
old filteredtype" is measurement
functional
parameterorvalue not.
result. The
must Aparameter
be 'RNAR'.
low value
value
emphasises determines the new the measurement
reason why the cell is
result.
PC This
blocked.parameter indicates the DPC Mode Change
Support
With UL
This value of a 0,cell.
required If a cell isC/I
old received
measurements known value are not
isnot to support
used by
PC
DPC Mode
Internally
considered.
the UE to changing,
calculate (RNC the the
RNW value
initial database),
output of thispower parameter
this of the
PC This
shall is
parameterbethe settransmission
istoa '0' bit (not
structure, power
supported). inthe of the
which PICH
If aeverycell isbit
first transmitted
channel. preamble on PRACH
PC known
represents
The power to Itsupport
parameter
according
carries
toa
offsetdifferent
the
the reason
DPC
between
concerns
Open
paging
Mode
loop a the
indicators
changing,
forlast
3GPP-specified
power why thewhich
transmitted
control thecellvalue tell
ispreamble and the control part of the PRACH message (added to
the
of UEparameter
this
blocked. toThere
read the
can is paging
set
be to
several message
'1' (supported).
simultaneousfrom the
PC NBAP-interface
procedure.
The parameter This only.
parameter
defines the power defines the
offset value
for the of
associated
Parameter
reasons why secondary
is used
a cell by CCPCH.
Nokia
is blocked. DRNC The transmission
when
The
the
TFCI
power
default
IE Constant
symbols
value
value
is relative
relative
ensures
value, which
toto the
the
high isItscell
part
downlink
CPICH
possible
interference
of System statescapacity. Bigger values increase the probability for successful R
PC determining
The
are parameter
presented
Information Block whether defines
below: 5. of to
The send
the value power a DPC
of theoffset Mode for
parameter the
transmission
Change
TFCI symbolsSupport power
power. Indicator
relative It toa Secondary
may the todependa Non-Nokia
downlink CCPCH.
on the SRNC. The
PC This
depends
The
TFCI parameter
parameter
field on is the
offset is part
propagation
defines relative of the Systempower
to channel.
the Information
offset
power for
of thethe Block 5.
number
transmission
- WO of paging power
(working) indicators
of a Secondary (PI) perCCPCH. frame. The The
TFCI
data symbols
field.
following The relative
power to the
offsets downlink
vary in time
PC The
For Nokia
TFCI fieldtable
power
transmission isramp
BTS's offsetshows
power
step
(except
relative the
on
of a(AI)
recommended
PRACH
for toRAN1.5
Secondary the power preambleBTS)
CCPCH. ofvalues
the
the when
The
according
for
no
value
data the to
field. use to
different
acquisition The the
is '1'
powerbit
cases:
indicator rate.
(supported).
offsets Proposed is detected
vary in values
time by are:
the 2
PC This
TFCI -
is BL-USER
the
field transmission
is offset (blocked
relative by
power to the
the of user,
one
power U)
Aquisition
of the
dB
UE.
For for
3rd
according 15 ksps;
party to the BTS's 3 dB
bit rate. for
the 30
value ksps;
Proposed must and be
values4 dB for 60
Indicator
data
ksps.
This field.
Note:
parameter (AI)
The When compared
power
definesmodified,offsetsto
the CPICH varylocking
cell
transmission inpower.
timeispower Ifare:
a 2
PC N.
dB PI
for per
determined. 15 frame
ksps; (NP),
3 dB Repetition
for 30 ksps; ofand PICH 4 dB bits,
WCDMA
needed.
of the
Power
-
according BL-WF-COCO
High BTS
relativetoSpeedthetransmits
bit
todefines
(blocked
a
rate. Proposed
Physical
CPICH
large
(dB): Downlink
because
number values
Shared
COCO
of are:60
for
AIs, 2is
PC ksps.
not
This
then
dB foryet Note:
the 15 created,
parameter total When power
ksps; 3 dB forof30W) modified,
of the
AICH cell
transmissionlocking
increases.
ksps; and ispower
Channel
18, 16,High
needed.
of the -10(HS-PDSCH)
Speed Shared HS-FACH
Control for4 BCCH.
Channel
dB for 60
(HS-
PC ksps.
This
HS-PDSCH
36, 8, Note:
parameter
-10 When
power definesmodified,
level the
is cell locking
transmission
relalative to theispower
SCCH)
The
needed. -
AICH BL-FL-COCO
of HS-FACH
consists (blocked
for BCCH.
ofAcknowledgement
aconfigured
repeated sequence because
HS-SCCH of a power
of 15
of the
primary
72, E-DCH
CPICH
4,parameter HARQ power in a cell. Indicator
PC This
failure
level is-8
consecutive
Channel.
inrelalative
COCO,
E-HICH Access defines
C)
topower the
Slots the(AS),
primary
is
transmission
related CPICH
each to one
the
power
power 5120
144,
of the2,in
configured -5 in aAbsolute
E-DCH cell. Grant slot Channel. E-AGCH
chips
transmission length. power Eachofaccess the primaryconsists CPICH. of two
power - is related
BL-WBTS to the
(blocked
parts: an Acquisition Indicator (AI) part transmission
because power
the BTSofhas
consisting the
primary
sent disabledCPICH. state
of 32 real-valued symbols, and a second part, information, B)
1024 chips in length, which has no transmission
and is- BL-SHUTDOWN
not formally part of (blocked
the AICH. because This second the
BTS of
part shuts the slot down, H)
is reserved for possible use by
CSICH, or possible future use by other physical
PC This parameter defines the transmission power
of
This theparameter
E-DCH Absolute defines Grant Channel. E-AGCH
the transmission power
PC
power
of the is
E-DCH defined HARQ in relation
Acknowledgementto the pilot bits on the
Indicator
PC This
DL parameter
DPCCH except defines when the transmission
Fractional DPCH power(F-to
Channel.
of theparameter
E-DCH E-HICH Relative power Grantis definedChannel. in relation
E-RGCH
PC DPCH)
This
the pilot is configured. defines Whenthe F-DPCH
transmission is power
power
configured,
of is bits
theisE-DCH related on the to the
theRelative
E-AGCH
DL transmission
DPCCH except
Grantpower power
is defined
Channel.
when
E-RGCH inof the
PC Fractional
This
primary the
CPICH.DPCH
transmission (F-DPCH) power is configured.
of the primary When
relation
power
F-DPCH to the
is relative
defined power
is configured, in the of
relation transmitted
the E-HICHto the TPC
pilot
power bitsisonon
bits the
CCPCH
the
This F-DPCH.
parameter isto the CPICH
transmission transmission
power of(F- the
PC DL
defined DPCCH in except
relation towhenthe Fractional
power of DPCH
transmitted
power.
primary common pilot When channel. The
PC DPCH)
TPC
This
The bits
is
P-CCPCH is
the configured.
on theisF-DPCH.
transmission abyfixed power
rate F-DPCH
(15of theP-CPICH
ksps, is SF = 256)
primary sync
In
physical
configured, case ofchannel
WBTS,
the carries
E-RGCH using the this
power commonparameter,
is defined pilotsinitofisthe
downlink
The parameter physical defineschannel the used
transmissionto carry the
PC possible
cell,
relation
In
BCH. case totoaWBTS,
as defined
of
Itinis
adjust
the in the
power
pure
signaled
by of
data
cell
using power
setup.
transmitted
channel thisand The TPCofpower
level
parameter, the
bits
characterized on
it is E-of
the
AGCH
transmission
the S-CCPCH relation channel
power to target
of which
the level
CPICH carries:
whichphysical is -8 dB
PC This
possible
by
below
channel aF-DPCH.
is
fixed the
P-CPICH
transmission
tochannelisation
defines
adjust signaled
power.
the actual
power
codepower of thelevel
(Cch,256,1).
cell(containing
size,
S-CCPCH
which
of theThe
means
E-
channel,
HICH
P-CCPCH
The in
parameter which
relation carries
is broadcastto
defines target a PCH
level
overtransmission
the the which
entire is -14
cell PCCH)
power dB
and itof
PC -that
In acase
PCH
the of(containing
power
WBTS, byPCCH),
ispower.
determinedusing thisan FACH
byparameter,
radio network itofand
is
only.
below
is
the not This
P-CPICH parameter
transmitted
S-CCPCH channel during is not
thatthe needed
first
carries 256 if achips
only PCHa 24
PC (containing
In
planning.
This
possible
FACHs case of
parameter This
to
arewhere DCCH/BCCH/CCCH),
WBTS,
adjustparameterthe
defines
multiplexed signaled value
the
intois of
used, the
transmission
power
theThis same and
parameter
for
level an
example,
of FACH
power
S-CCPCH. the is
E-
each
kbps
(containing
meant
forcase slot,
PCH
neighborfor (containing
E-DCHDTCH). Primary
TTI
measurements, PCCH).
10 SCH
ms and and
which no Secondary
parameter
E-DCH
are critical soft is
for
of
RGCH
In
This the SCCPCH
isare in
of relation
WBTS,
thetransmitted. channel
transmission to
the target
value that
power level
of carries
thewhich
of are only
parameteris
the multiplexed -14
secondary a dBis
PC SCH
not
handover
network needed case.if a
performance. PCH and The FACHs
default value is 5-10%
FACH
below
The
meant containing
P-CPICH
spreading
for E-DCH CCCH
power.
factor TTI of 10this and
ms a FACH
S-CCPCH
and nothe containing
E-DCH is 256 (15
PC
synchronisation
into
Alternatively,
This
of
CTCH. thethe same
parameter
maximum
channel
S-CCPCH
when indicates a standalone
transmitting
related
or
theif power
8 kbps
number to
PCH ofPCH
of Primary
is
the is soft
mapped
free E-RGCH and E-HICH signatures which have to be reserved in the
ksps)
handover
CPICH
used. and the
case.
transmission proposed power. default value
Theissecondary for this S-
SCH
to
In
WCDMA
In another
case
case
CCPCH channel of
of S-CCPCH,
WBTS,
BTS,
WBTS, which if
the
'-5 dB'.E-DCH the
can
value transmission
be, TTI
of for
the
The transmission 2 ms,
example,
parameter power
the 43 value
power isof
consists
the
of
When S-CCPCH
the ofavailable
parameter
the repeatedly
channel transmitting
carries:
PtxOffsetExxCH2ms
free E-RGCH/E-HICH a lengthis the
added 15
dBm/carrier.
This
meant
value
In caseparameter
isfor E-DCH
relative
of WBTS,Note is
to that
needed
TTI
the
if E-DCH the
10
CPICH mscell
only
TTIand iswhen
is blocked
no
transmission
2 Service
E-DCH
ms, if signatures
thesoft
value per cell is equal to lesser than the value of this parameter
PS sequence
The
This
to thespreading
parameter
signaled of modulated
factor
determines
value. codes
ofissupport
this S-CCPCH
the 256
offset chipsvalue in
is cell
128 that (30is added to the activation time, which RNC has produced intern
WCDMA
Area
handover
power.
of the BroadcastBTS
case.
parameter does (SAB) not
PtxOffsetExxCH2ms activated theinused theis value.
added (a
length.
ksps),
-The
Big anvalue
FACH These
and ofthe are
proposed
(containing
this the Secondary
parameter default
DCCH/BCCH/CCCH)
decreases value for this
thepower S--
and
possibility for E-DCH congestion, but increases the E-RGCH/E-HICH
PS three
This
to thetypical
S-CCPCH
parameter
signaled supported channel
defines
value. range
whether is (Cell
configuration). the max alternative
Synchronisation
CCPCH
This
an
In parameter
FACH
case ofchannel
(containing
WBTS, isCodes
is if -2
overruled
UE dB. (SSC),
DTCH).
is The
in if
E-DCH transmitted
transmission
Fast HSPA
soft in
Mobility is enabled in the active set cell with the WCEL parameter Fas
18dB)..(Cell
In
scrambling case with of WBTS, max
code power
isifallowed
E-DCH - 3dB).TTIbe
to The
isused value
2 sequence
ms,inthe of
case this
value of
PS parallel
This
power
handover parameter
value state the primary
defines
is relative
(that is to SCH.
whether
theSCCPCH
non-serving This
CPICH theIE feature
E-DCH RLS on
Application Aware RAN is enabled or not in the corresponding Drift
parameter
The
of
compressed
In thespreading
case parameter
of WBTS,defines
modefactor the of value
PtxOffsetExxCH2ms
method this
is inhalvingof the the Primary
is 128
added
softspreading (30
the
Dynamic
transmission
In secondary
both TXservice
cases, SCH
power.
the orifwhich
UE
enables
application
spreading
E-DCH
the
factor downlink
prioritization
ofof this frameforofthe HSDPA to scheduling is applied over RNC
Iur towards a correspond
PS exists)
CPICH
This
ksps),
to
factor.
handover
synchronisation,
and
theparameter
and
signaled F-DPCH
power,
the
state determines
proposed
value.
(that
and
does
is isnotathe
default
non-serving
indicates,
exist,
part offset
tovalue thevalue
E-DCH
which -2S-RLS
isvalue
System
code
that
dB. is added the activation time, which has produced intern
By
CCPCH
the
Information enabling
parameter is 64 this
(60 parameter
ksps),
PtxOffsetExxCHSHO
Block 5. In and it
particular, is
the interpretive
proposed
if the is added
value so of that
to all BTSs under the Drift RNC are supporting RAN2509 featu
PS exists)
This
group and
parameter
the F-DPCH enables
cellisdownlink does not
/ disables
scrambling exist, thethe
code usevalue of
belongs. of
default
signaled
the
This value
management
parameter value. 0 dB.
parameter
is overruled The transmission
"MHA
ifE-DCH
Fast used"
HSPA power
is set
Mobility to
In
the
Continuous
Each case
parameter
SSC of WBTS,is Packet
chosen if Connectivity
UE
PtxOffsetExxCHSHO from is in a set inDual
of soft
the
16 isdifferent
added
cell. to is enabled in the serving HS-DSCH cell with the WCEL param
PS value
Parameter
the
handover valueis relative enables
"Offset
state toused,"
(that the/ is CPICH
disablesthen the
non-serving transmission
the value E-DCH Band
of the RLS HSDPA
IE (DB-HSDPA) usage in the cell. Dual Cell HSDPA (DC-HSD
signaled
codes value.
256 chips in length.
power.
RNC signals
Primary
exists) andCPICH 3GPP
F-DPCH TX specific
power
does is
not E-AGCH,
obtained
exist, the E-RGCH
by value of
PS This
If parameter
theE-HICH
parameter defines
is enabled, whether the DC-HSDPA
RNC activates and
and
DB-HSDPA
subtracting
the
RNCparameter signals power
cannot
the value offsets
be
PtxOffsetExxCHSHO
3GPP ofused
specific thetomanagement
WBTS
simultaneously
E-AGCH, when
isE-RGCH
added itwith to MIMO for the UE. DB-HSDPA with the single cell HSUPA can b
MIMO
Continuous
This can
parameter be used
Packet indicates simultaneously
Connectivity whether featurefor
or notofthetheif sameDC HSDPA feature is enabled in the cell. Before the feature is ena
PS supports
parameter
signaled E-DCH
"Cable
value. TTILoss" = 2 from ms. the value this
and
UE.
possible E-HICH
Both features
for power
UEs which offsets
must also to WBTS
be the separatelywhen it
Two
NOTE: cells can
DB-HSDPA All form acell DCsupportHSDPA cell feature.
pairthe when Thethey
DC-in thehave adjacent carrier frequencies withinBand
the same frequen
PS parameter.
The
supports
enabled
following parameter inE-DCH
the
subfeatures
the
cell TTIADJD,
indicatesin 2pair
=order
are
ADJI
whether
ms. to
part
must and
make
of
be
orADJS configured
not
simultaneous
Continuous
object frequency bands, which support Dual HSDPA opera
In
For
instances
RNC
HSUPA case
NB/RSxxx of
signals DB-DC-HSDPA,
in
feature the signaled
3GPP same
is enabled RNC,
specific value two is cells
defining
E-AGCH, parametercan
this
cell. E-RGCH form
cellvalue a
as cell pair when they have frequencies in different frequency ban
PS usage
Packet
Defines possible
Connectivity
the maximumfor the UE. in
feature:
received The theuplink
parameter power also
as
target,
and such
E-HICH and
shall signaled
have
power the always
same
offsets to when
value
WBTS in E-DCH
their
when is
Primary
it
-For
defines
decrease
NOTE:
configured.
NB/RSxxx
DPCCH whether
DC Gating
in signaled
a cell,
HSDPA 64QAM
(UL used
cell DTX), value
canmust
when
pair beis
bitparameter
used
rateswhen
belong are to the
value
DC-same sector.
PS CPICH
This
supports
asCQI such power
parameter E-DCH
and parameter.
defines
signaled TTIare the
=always ms.maximum
2simultaneously when E-DCH received isto uplink power increase in a cell, used when the uplink DCH bit ra
-HSDPA
decreased
NOTE: and
Reporting
DC HSDPA byMIMO
the reduction,
packet scheduler,
cell pair parameter must have 007:0283 configured
relative
the same is Tcell
configured.
Ifuse
the for Bit13 ofUE.
the PRFILE setvalue
to 0, then the value of the averaged estimated received
PS -in
Defines
Discontinuous
PrxTotal. the the maximum UL cell transmitted
Reception (MAC downlink
DTX) and
NOTE:
For If
power the
NB/RSxxx DC
Bit13 HSDPA
of
decreasedefines the
signaled PRFILE
in aReception
cell,
pair
value
used
must
parameter
is belong
parameter
when bit
to
007:0283 the
value same
rates are downlink is set frequency
to 1, thenband. Frequencies
the value in different frequency
of the management parameterbands
Targ
PS -This
Discontinuous
parameter DL the maximum(DL DRX). transmitted power increase in a cell, used when bit rates are allo
If the parameter
as such andbysignaled
decreased is
theispacket given always the maximum
scheduler,when E-DCH value
relative isto5 dB the power increase limitation is not applied in the uplink PS D
If the
configured.parameter
This parameter given the maximum value 5 dB the power increase limitation is not applied in the downlink D
PS PtxTotal.
Also UEs can beindicates kept longer the length
in Cell_DCH of the state DRX
PS because of discontinuous transmission and
This timer is used on MAC -c to detect the idle periods on data transmission (NRT HSPA RBs and SRBs) for the
reception.
Based on this timer the MAC -c shall give No_Data indication to RRC, which further can change the state of the
PS This parameter indicates whether DRX operation
PS This parameter determines the minimum set of
E-TFCI when the
This parameter 10 ms E-DCH
determines Transportset
the minimum Block
E-
PS
Size
TFCI table
when 1 is
the used.
10 ms E-DCH Transport Block
PS The parameter defines the margin for the total
Size table 0ofisSCCPCH
throughput used. (FACH/PCH) forlargest
PS A
Theminimum
parameter set of E-TFCI
defines the indicates
thresholdthe for the totalE-
downlink
TFC that
throughput channel
canof be type
used selection.
by the UE When
independent the of
PS A minimum
This
measuredparameter setSCCPCH
load of E-TFCI
defines
is below
(FACH/PCH)
the
the indicates
size of athe
threshold thechannel
largest
sliding
by
for
at leastE-
the
TFC UE
downlinkthat power
channel
can situation,
be type
used by given
selection.
the UEthat thevalid
Ifmeasurement
independent threshold of
averaging
this margin,
absolute
This window
grant
parameter FACH for
usage
isdefines
available the the activity
isandpossible.
there
activity is no for
threshold
PS is
theexceeded,
UE power DCH or
situation, HS-DSCH
given thatis aallocated.
valid
of the HS-DSCH
transmission
the activity on MAC-d
DCH.
measurement flow
of of
the PS
HS-DSCHRB when the
MAC-
PS Measurement
absolute
This
UE is grant isisdefines
parameter
in CELL_FACH used
available forthe
state theand channel
there
activity
using timeistype
HS-FACH. noto the The
d flow of
selection
transmission
trigger PS
timer RB
for used
the on
SRB
on DCH.for CELL_FACH
in
the the RRCthe
activity state
connection
measurement using HS- of
PS activity
This
Note:
FACH. measurement
parameter
This
The minimum
threshold measures
Enables/Disables
set
is E-TFCI
defined is
as the
used
a number
use
number always of
of DRX
of
setup
the
bits phase
HS-DSCH
transmitted and
MAC-d
byfor theflow
theactivity NRT
HS-DSCH of RB
PS in
RB the
mac-d on RRC
flow
PS when
bits
state
This
Note: perF-DPCH
second.
CELL_FACH.
parameter
This isdefines,
minimum not
The configured
set inHS-FACH.
E-TFCIms, and
measurement
the
is E- always
period
used of time
CELL_FACH
during the state
sliding using
measurement window. If the result
The
TTI=10ms.
measures
between
when F-DPCH thetiming
the number
is of
configured of bitsis
event transmitted
detection
and E-TTI=10ms.and byorthe
the
PS of
Thisthe
value 0activity
of
parameter the measurement
parameter
defines, means
in bytes, higher
that
the than
the HS-
threshold of data in the RLC buffers of PS RB that triggers the downlink tr
HS-DSCH
timing of MAC-d
sending flow during thethe sliding
equal
DSCH to
measurement
the
MAC-d flowa activity
window.
downlink
HSFACHActivityThr,
The
capacity
measurement
sliding
request
measurement is not
when
performed.
Value the HS-DSCH
HSFACHActTimeToTrigger
Infinity means MAC-d
that isflow
data of
started.
in the
RLC If PS
the RB
buffers in
result
of PS RBs are not checked and thus occupancy of RNC RLC bu
window
CELL_FACH is defined
of the activity state with
is used.
measurement the Ifisthe lowerDL than RLC the buffer
HSFACHActivityAveWin
of the PS RB exceeds
HSFACHActivityThr, the the parameter.
threshold Ifdefined the result by
of the activity
HSFACHVolThrDL, measurementthis
HSFACHActTimeToTrigger is stopped and timer isismore
started. than orreset.
When
equal
this to the
If thetimer
timer threshold,
expires,
expires, the downlink
it ittriggers
triggers a downlink capacity
capacity
HSFACHActTimeTrigger
request with state a state change
change isrequest
started.
request fromfrom
CELL_FACH to CELL_DCH.
PS This cell-specific parameter defines whether the
RAN 285 featureis'Multi
This parameter used NRT RABs'the
to control is use
supported
of
PS
in
HSPAa cell
QoSor not. The
features. number of BTSs
Prioritization is that
done support
PS This
the parameter
feature determines howbymuch the HS-DPCCH power offset update is delayed after the active set updat
according toRAN 285
these is limited
features an ASW
for uplink when E-
PS capacity
This
DCH license.
parameter
is allocateddefines the sizewhen
and downlink of thejust/also
sliding
Recommended value is 3000 ms. The HS-DPCCH power offset update is not delayed during anchoring if the va
PS HS-DSCH is allocated. The following
This parameter defines the activity threshold fo
functionalities can be activated/deactivated with
PS This parameter defines the activity time to the t
this parameter:
PS - QoSparameter
This prioritization for HSPA
defines NRT connections
the number of Common E-DCH Resources of the HS-RACH configuration in the cell. C
(QoS Aware HSPA Scheduling)
PS The parameter enables / disables the use of HS-RA
-Note
HSPA thatstreaming
the number (Streaming QoS for
of configured HSPA) E-DCH resources is practically same as maximum number of HS-
Common
PS This
- HSPA parameter
CS voicedetermines
(CS voice the
overplanned
HSPA).maximum total uplink symbol rate of the HS-RACH (maximum total sym
PS This parameter defines the HSDPA Measurement P
Information is signaled(or
A feature combination to the
just UE
oneusing the can
feature) RRC SIB5/5bis: Maximum channelisation codes IE and to the BTS u
PS This parameter
be activated onlydefines,
if thereinisms, the period
a license for allbetwe
PS features that aredefines,
This parameter activated.
in bytes, the threshold
PS This parameter
The system enables/disables
checks that CDSP cardsthe use
that of
HSUPA
supports
The in the
parameter cell.
the feature CSthe
defines Voice over
initial bit HSPA
rate inexist
the in
PS
the RNC. that can be allocated by the PS in the
downlink
PS The
When parameter valuedefines
thesituation. of the the initial bit rate in the
schedule
uplink that can be Theparameter
allocated PS does by the
is 1
not PS
(HSUPA
schedule
in
PS functions
The
Bearparameter
downlink in mind are
NRT enabled
that determines
DCH if HSPA for
bit does rates the the
streaming cell),
that Mass the
are or system
Event
CS voice
below Handler
the functions in use.
schedule
checks that situation.
the maximum PS number not schedule
of HSUPA- uplink
is
value
This activated, of
parameter this then
parameter. also
determines QoS The prioritization
allocated
thevalue maximum bit forrate NRT
PS NRT
capable
The DCH
functions BTSs bit rates and below
cells isthe not theinof
exceeded. thisIfnumber it is Handler of E-DCH allocations (users with E-DCH) in the cell (including
HSPA
corresponds
parameter.
connections
The tothat the are
allocated
is inrelated
highest use.
bit bitrate to
rate Mass
correspondsthe TFS Event
to
are the following:
PS not
This
Bit
from possible
0: parameter
Increased
which theto activate
defines
TFCS TVM HSUPA
the
pending
is maximum
constructed. timefor a new allowed BTS or
Notice
the
a
number cell,highest that
the even
bit rate
of activation
SC-E-DCH if this
indoes theparameter
and TFSnotDC-E-DCH from
succeed does which notthe
and
users restrict
an in load the user amount, then the restriction is done according of the
PS Increased
This
-TFCS parameter
HSUPAXUsersEnabled TVM pending
defines time
the is
maximum used during
allowed high state.
error
the
Bit MAC-i/is
1: is
message
Temporaryconstructed. is
specific printed
maximum BTS out.scheduler.
bit rate for Certain
UL DCH SC-
Note:
-number If
HSPA72UsersPerCell the maximum
of SC HSDPA bit
and rate primary of the RAB
DCallowed HSDPAis below
PS This
E-DCH
Temporary parameterand DC-E-DCH
maximum defines bitSC the
user
rate maximum
is
is counted
setbit to ratetheonce minimum per bit rate for UL DCH during high load state.
the
users
-Note: value in
HSPA128UsersPerCell.
If a
the ofcell. theCertain
maximum minimum bit allowed
rate HSDPA of the users
RAB are
is below
number
HSUPA
scheduler.
Bit 2:parameter of
cannot
Temporary HS-DSCH
SC-E-DCH be activatedMAC-d
and flows
online
DC-E-DCH in
when theuser cell.
the is cell
ausers
PS This
(MinAllowedBitRate)
counted
the
HS-DSCH value only
ofMAC-d minimum itsmaximum
in defines actual
flow of
the
orallowed
initial
cell.
the
number
maximum
bit
Certain
bit
certain
rate,
rate
ofitallowed
SC
HSUPA
DC is allowed
HSDPA
HSDPA
is
user
Temporary in the
that operating
has maximumone state.
or more
number In this
E-DCH of case,
HSUPAMAC-d activation flows
users of
PS
number
to
user
Also
This
(MinAllowedBitRateUL)
users
schedule
parameter of
isiscounted
the SC
resource
counted
a lower HSDPA
only
defines ininand
NRT
situation
only the
the
or
its
DCH DC
primary
of
maximum
initial
actual the HSDPA
bit bitrate.
BTS cell.
cell.rate,
users
The
canAn SCinis used
it isrestrict
allowed
HS-DSCH
during
the user high load
amount. state.
Thus, the maximum number of E-DCH alloc
HSUPA
established.
Bit
the 3: first
Increased
MAC-hs/ehs requires
RNC CQI does
specific the
feedbacknotWCEL
BTSflows exceed object
cycle the locking
maximum
maximum
HSDPA
number
allowed
MAC-d and
of
to
flow
bit DC
HS-DSCH
schedule
of
rateHSDPA
certain
of the a MAC-d
lower
DC
RAB
user HSDPA NRT isscheduler.
used
a user
DCH of
users
as
SCthat
bitaCertain
is
new
HSDPAhas
rate.
PS procedure,
number
This
Increased
SC parameter
HSDPA but CQIand
admission
and then
determines
feedback
certain HSUPAofMAC-dSC-E-DCH
cycle the can be
planned
isflows
used enabled
and if the DC-E- number of HSDPA users in the cell exceeds a pre-defined threshol
minimum
one
and
The
counted
using
DCH
maximum
or
DC user
more
theHSDPA
maximum allowed
only is
total
HS-DSCH
inper
HSUPAEnabled bit
inhibited theusers
uplink
bit rate
rate primary
ininDC
of
symbol the
orHSDPA
the initial
MAC-hs/ehs
RAB
cell.
parameter.
scheduler
rate Each
bit
is
of
user
rate
the
are
HS-DSCH
After
if the
E-
for
established.
used specific
as the
the
a
PS Bit
counted
RRC
The 4: RNCLoad once
connection doesbased not in E-DCH
scheduler.
question.
exceed 2 ms
the SC TTI HSDPA
maximum prevention and
number DC
BTS
new
MAC-d
cell
maximum
DPDCH(s)
E-DCH
HSDPA isparameter
scheduler.
minimum flow
unlocked,
10
user ofofisthe
number
ms orindicates
eachHS-DSCH
initial
aisHSUPA
TTI UE isHSDPA
user to bit
inthat
used be
whether
is
the rateMAC-d
user
activated
exceeded.
cell.
instead
has
for
one
orflow
the
is ofor
not
in RRC
counted
E-DCH
ofthe
the
more
the MC-
cell 2 ms TTI if the number of HSUPA users in the cell exceeds a pre-d
HS-
but
HSDPA
certain
connection
when admission
the SCfeature HSDPA
in
totalbased of
question.
number SC enabled
and HSDPA DC
offor in
HS-DSCH and
the
HSDPA DC
cell. userHSDPA
MAC-d is flows
PS setup.
The
Bit
DSCH 5:parameter
UL MAC-d load determines
flows AC
established. the
HSPA+ number
RNC features of HSDPA
does not users in the cell to trigger usage of the increased CQI feedba
user
counted
in the is cellinhibited
onceis per
calculated. in the
scheduler. cellRNC if the
Each
does maximumHS-DSCH
not exceed
PS This
The
Single
exceed
number parameter
lowest Cell
parameter the
is about parameter
HSDPA
maximum is defined
determines
to be value
allocation
number
exceeded. per the among
iscell
but done
number and the
admission because
instead
ofuserHSUPA ofof HSPA+,
users in if the
the load
cell tobased
triggerACusage
exceeds theE-DCH
of the pre-defined
10 msthreshol
TTI (E-
The
MAC-d
the
HSUPA
The MC-HSDPA
maximum
increasedflow
must ofbe each
number
CQI feature
activated SC
feedbackbut is admission
and controlled
DC
simultaneously
value HSDPA is with
ofvalidSC afor
for isa user
all not using CPC. The value for the temporary CQI feedback
scheduler
parameter
SC HSDPA consists
values
and DC of of the
HSDPAseveralcells usercells,
that is lowest
belong
inhibited to the
in
PS capacity
counted
The
HSDPA
cells parameter
using andlicense
when the DC the
same (nbr
determines
HSDPA total of cells).
number
frequencyuser theisloadThe of system
HS-DSCH
inhibited
(UARFCN) stateintime-to-trigger
the
in this for the Mass Event Handler.
parameter
E-DCH
Bit
the
If the value
scheduler
value 0:values
active 0 isifset
Function the
set of
is to cells
used
isthe
maximum forming
when
disabled.
parameter, thescheduler
number E-DCH
theis also
to
E-DCH is
be shall
Notice
checks
MAC-d
cell
BTS.
If the if the that
value that
flows HS-DSCH
maximum
0capacity
in
is the
set is
number
to
user
scheduler
thenot amounts
exceeded
is
parameter, is
aboutcalculated. are
towhen
the be aThe
increased cell10 CQI ms TTI is used for every HSUPA UE.
feedback cycle users
is used
PS be
allocated.
Bit
The
exceeded.
restricted used.
value
parameter The
1: Function signaled
determines value
is enabled. is
the temporary updated when a
maximum number of HSUPA forfor
theevery
MassHSDPA UE not using
Event Handler.
is
RNC
The
exceeded.
soft
unlocked. doesby
Mass
handover not
Event BTS exceed
branch
configuration,
Handler theuses
addition maximum ortheactivated
load
deletion number stateoccurs but
time-to-trigger for setting the load state on and off. If the averaged
PS The
capacity
The
admission function
parameter of is
features SC switchedand theon/off
determines
HSDPA other
and theDC byuser theamount
scheduling
HSDPA WCEL-MassEventHandler
queue
user is parameter.
HSUPA
The
and
The
This function
the
Mass
parametercannot
lowest Event is be
switched
value
is deactivated
Handler
defined changes. on/off
uses
per online
by
Note:
the
cell, the
and when
Upgrade
temporary because the
WCEL-MassEventHandler is
maximum number parameter.
of HSUPA users to limit E-DCH allocations duri
parameters:
Cells
threshold
inhibited
The in oneinfor theband
thescheduler can
Mass beEvent used
if capacity
the in
Handler. MC-HSDPA
maximum number
PS Notice
cell
The
not
the isshorter
inthat
parameter
always
scheduler the the
HS-DSCH
operating
possible value
sets
consists limit
due of
MAC-d
state.
of
the
for
to several
parameter,
In
the flowthis
UL amounts
cells,case,
load
reasons the
based
lowest
faster
are
in the load
HSDPA user state functions
amount in theturn
cell.on andcalculated
If the off. Correspondingly, the
UL load based
-is
configuration,
also HSDPA48UsersEnabled
about restricted to be ifexceeded.
by they the are
BTS adjacent
configuration, with each
deactivation
the
If the RNC. value of HSUPA
0 is defines set first requires the WCEL
PS parameter
-Available
This
other,
The HSDPA64UsersEnabled
parameter
Mass they values
belong
Event
load state toto
of
Handler thethe
cells
functions
parameter,
forming
whether
same
uses MIMO
sector
the
utilising
schedulerHSUPA
anduser
and
scheduling they
time-to-trigger
allocations are prevented in the cell during the high load state.
must
(controlled
activated
object
The
be
-queue
64QAM used. locking
calculation
HSPA72UsersPerCell
capacity
modulation
procedure,
of features,
UL can load and
betime
and
based
used
then theHSDPA other
HSUPA
simultaneously user canamount takes theby the WCEL-MassEventHandler
following things into account: parameter):
PS have
-This
amount
be
The Increased
disabledthe
parameter
parameter same
threshold
parameters: TVM
using Tcell
isfor
defines defined
pending
the value.
detection
HSUPAEnabled
the perminimum of
cell the and load state.
because
parameter.
allowed bit If
-The
Usage
--the
for HSDPAthe final user
maximum
of the UE.
HSPA128UsersPerCell
same type
temporary Both(SC/DC/MIMO)
total uplink
maximum
features symbol
must number alsorate be is the
of HSUPA users is controlled by the WCEL-MassEventHandler para
scheduler
After
rate
-The amountaveraged
Temporary
HSDPA48UsersEnabled
inthe the ofconsists
cell isqueue
maximum
downlink
CPC unlocked,
users length
ofthat several
bit
ofPS rate
HSUPA
the attains
can cells,
for
cell isor
UL lowest
downgrade exceeds
DCH
deactivated tobit
PS minimum
Notice
-the
separately
In that
parameter
case of the
HS-DSCH
enabled
DB-HSDPA, following
defines in user
the the limitations:
MC-HSDPAcell amounts
minimum in order UE
are
allowed
cells to also
make
in two
-parameter
in
the
-capability, the
amountthreshold
Temporary
HSDPA64UsersEnabled
NCR cellDCH values
setup.
of defined
maximum
non-CPC bit of cells
rate byin
users this
number forming
congestion of parameter,
the scheduler
of HSUPAcell the
situations.
with users load
must
normal
restricted
rate
-This
simultaneous
frequency
state
be used.in functions
parameter
by
the bands
MaxNumbHSDPAUsersS BTS
uplink theusagecapability,
will BTS
that
can
defines be PS
possible
be
taken usedcell-based
configuration,
caninto
downlink downgrade
forforuse the
MC-HSDPA
threshold
limitation,
activated
UE.
after totime-
forNRT CQI feedback cycle
PS -capacity
The
-the HSPA72UsersPerCell
amount allocated
possible of non-CPC bit
limitation rate corresponds
users
which with to
setextended
isadjacent based the highest
onCQI thefeedback cycle (MEH)
DCH
-the
configuration
to-trigger bit rate
MaxNumbHSDSCHMACdFS. features,
defined in
when and
congestion
by theother
they have
WCEL- user
situations. amount Thecarrier
-In
-HSUPA
bit
maximum sum
addition
HSPA128UsersPerCell
rate
amount in ofof
must the the
to DCH
uplink the
be
TFS RLC Mass
from
users
user buffer
deactivated bit Event
which
of rate loads
the Handler,ofTFCS
simultaneously
ofthe
cell the theRAB, SRB3
also
isand the and
for Automatic Access Class Restriction feature utilises the time-to-t
PS This
parameters:
allocated
frequencies
MEHLoadStateTtT
Notice
SRB4.
parameter
that
Ifthe bit
RNC rate
inside
HS-DSCH
defines
detects corresponds
used
parameter
uplink
MAC-d
that bands, threshold
threshold
to
flow the
they
expires. highest
amountsall for
is belong
thebitthe
are to
-all
constructed.
-actual
sum
-This MaxNumberHSDPAUsers
the
amount of cells
available
HSDPA48UsersEnabled of that
secondary
RLC use
capacity
buffer the same
DC-HSUPA
loads in theof frequency
RNC.
the users.
SRB3 and
PS rate
the
also
exceeded, in
same thesector
parameter
restricted TFS
itinperformsbyfrom and
determines
BTS which
they allthe
configuration,
state the have TFCS
transition number issame
theactivated of E-DCH Tcell allocations that is reserved only for soft and softer handover
-(UARFCN)
SRB4.
-The
constructed.
value.
MaxNumbHSDPAUsersS
If RNC
HSDPA64UsersEnabled thisdetects BTS. that threshold isfrom
-capacity
Cell_FACH
Note: lower
MaxNumbHSDSCHMACdFS.
If the the
features,state value toand ofbit
Cell_DCHthe parameter,
other ofstate user and theallocates
amount islower
PS This
The
In
exceeded,
-This case parameter
UL
HSPA72UsersPerCell
parameter
load
the itmaximum
based
"HSUPA
performs defines
has
HSDPA
no
2 state the
Mbps" rate
effect,
threshold
user feature
transition the
amount
if connection.
the
RAB for
is
from
feature
an
check
active below
NRTis deactivated totally by using value 0.
HSPA128 Users Per Cell is activated to the cell with the parameter H
load
parameters:
signalling
When
the
DCH
Small is
value needed
allocation
values link
HSUPAEnabled
of theofonly to trigger
minimum
time
the for in the
parameter is
an theRRC
set
allowed
enhancedload
to preventsstate
enabled,
or functions
initial
overload
use the
bitIfof DC/MIMO easily, which leads to low DL peak rates.
(state
Cell_FACH
-on.
Note: "On"
HSPA128UsersPerCell
If the and
state
maximum exist)
to but
Cell_DCH
bit the
rate "HSUPA
of statethe and
RAB 5.8 Mbps"
allocates
is below
PS -This
Notice
threshold
system
rate
control
feature
parameter
that
Correspondingly,
HSDPA48UsersEnabled
parameter, is
verifies
for
is notDL
MC-HSDPA
not NRT
defines
itexceeded,
that
active, isfor the a
must threshold
higher
PowerSaveHSPAType
allowed
traffic.
the Ifcapacity
maximum
not
to schedule
the NRT
be
the value
activated
value
request
valueDCH aof
for
of isIf
lower
the
the
isset
this
to
signalling
-parameter,
the
NRT MaxNumberHSDSCHMACdFlows
valueDCH link
of the
allocationonly minimum the
time RRC
allowed
in overload connection.
bit rate
control or of
PS -frequency
rejected
to
This
NRT
allocation HSDPA64UsersEnabled
either parameter
DCH and bands
HSPA5 the
bit
time state
rate.higher
is
where
defines transition
or
The
longer load MC-HSDPA
NoHSPA05ReConf
the
maximum
than isminimum
isneeded
the not bit is tonot
performed. trigger
allocation
rate ofinUL the
Big
parameter
threshold
-load
initial
the
supported
-order
values
MaxNumberHSDPAUsers
UL bitNRT
state
HSPA72UsersPerCell
is
rate of
is DCH
(3GPP).
functions
the
"2".
not parameter
In
exceeded,
(InitialBitRateUL), this
resources
on.
case do
capacity
when it parameter
not is protect
system
the request
allowed
E-DCH also is is
to from extra L1 control channel load caused by DC/MC/MIMO user
time
RAB
defines,
checks
rejected granted
-- MaxNumbHSDSCHMACdFS.
This isto
parameter enable
usedthe
that
and for
as
DCH
thestate a an
HSUPA
maximum new
bit NRT rate
transition inDCH
minimumcan a
number cell.
is be in
not priority-based
If
or initial
decreased
of BTSs
performed. bit rate
and
PS schedule
configured
scheduling,HSPA128UsersPerCell
PowerSaveHSPAType
a in lower
whenthedefines NRTIfDCH
cell.
the
the minimum
priority
isinDCHset
bit rate.
NRTto DCH
ofinHSPA0,
the RAB
allocation
The allocation
of
the this
for
the
Also
capacity
time
maximum the
SF theRRC
grantedcan mass
value
bit be connection
for
rate increased,
event
of an "HSUPANRT
ofstate load
the RAB or2question.
state the is of
Mbps" DCH the can
cell
feature
priority-based
used as be
a prevents
is
new not the allocation of DC/MC/MIMO, regardless of the value of M
Notice
The
-released
NRT
HSUPA is
DCH longer
that
available
is is
notthe than
load
equal
configured the
WCEL-HSPAQoSEnabled
to thevaluefunctions
priority
to a which
cell, of the
utilising
the
even parameter
RAB
if the of
exceeded,
scheduling,
minimum
defines, to if
allowed
themust get
the
when
DCH the bitCELL
respective
the priority
rate load
or
can parameter
of
initialto
bevaluethean bit
reduced acceptable
RABratevalue of
for
with is
thisthe the
parameter
scheduling
-the MaxNumberHSDPAUsers
HSUPAEnabled incoming queue capacity have
is length
set the
request. same
(controlled
tosituation.
enabled." byinto
This all
the cells
isallocate:
valid
level
With
set
NRT
RRC
NBAP to from
the
"2".
DCH
connection
radion the
default
If
isithigheroverload
is
link value
exceeded,
in than 30,
question.
reconfiguration the itthisispriority
possible
is procedure
informed
of the by
RAB or the
-used
WCEL-MassEventHandler
when
-appropriate
18
in
MaxNumbHSDPAUsersS.
the
MIMO/DC
MC-HSDPA
Power configuration.
Saving Mode parameter): for BTS the feature is
of
the
-active
If
theDCH
Increased
the
incoming
NRTin the can DCH TVM becalls
configuration
RNC,
capacity
released
pending
allocation
and also
error
request.
to
time
time getand
when isthe thethroughput
longer Power than this
Value
-parameter
or 11 60
MIMO/DC
interference s of
value this calls
based parameter
change and DCH 11
to SC
"2"
loadmeans HSDPA
is not
toUL an that the
calls
allowed.
acceptable
Notice
-enhanced
Temporary
parameter
Saving that
Mode DB-HSDPA
maximum
specifies,
for BTS the must
bit
featurebit rate ratebe is for enabled
of this
inactive DCH NRTinwith the DCHthe
-level
If 1the MIMO/DC
Temporary NRT overload
when
-WCEL-DBandHSDPAEnabled DCH
the call
maximum overload and
allocationcontrol28situation
number
SC feature
time HSDPA is occurs.is not
longer
parameter
of HSUPA
calls active.
than
This
in
users this
order
can
RNC.
In case
parameter be downgraded
"HSUPA specifies, 5.8 or
Mbps"
the it bit
canfeature
rate be of releasedis
this active
NRT to DCH get
enables
to
free use MC-HSDPA the BTS towith release cellsthe in two DCH resources
bands.
(statecapacity
This with"On" noand ULforexist),
DCHan equal-priority
allocations
the maximum inNRT the valueRAB
cell of andthat
this with normal CQI allocations (no CPC users and no MEH CQI us
PS This parameter defines the minimum allocation
time
For the granted
interference for an NRT domain, DCHthis in priority-based
parameter
PS
scheduling,
defines the when
minimum the priority
capacity offor the the RAB of this
throughput
PS The
NRT maximum
DCH is lowertarget than forthe received priority total
of wide
the RAB band of p
based traffic load that is allowed for the E-DCH
PS the
This incoming
trafficparameter
in the cell definescapacity
on top of request.
the the maximum
admittedallowed or
target
scheduled
This interference
parameter DCH level
traffic
defines for
without
the the
the UL
considering
maximum PS NRT DCH
the
allowed
PS If the NRTwide DCH allocation timeorismore longer than this
resource
received allocation band when
interference. one The E-DCH
parameter
PS parameter
This
MAC-d
introducesparameter
flows specifies, defines
have been
a safety the
margin thebit
setfor rate
minimum
upthe of
in the this NRT
allowed
cell. The
received DCH
can belevel
interference downgraded target itordefines
level itforcannon-EDPCHbe released totoin get
PS target
interference
This parameter represents
power: defines the the
total fixed how UL stepPS size
close NRT DCH
the
free
resource capacity
interference
planned target allocation for
power; a higher
when
it is priority
one
applied or NRT
more
when RAB
E-DCH
the that
decreasing
This parameter the the target
defines
interference
levelthe for
fixed UL power PS NRT
step
caused
size The DCH
in
by
PS requests
MAC-d ownflows
interference
the a DCH.
cell ishave
DCH sharedThebeen
and priority set
dynamically
E-DCH up orderinmore
users theisisevaluated
cell.
between,allowed onto
resource
increasing allocation
the target when level one
for or
UL PS handling
NRT E-DCH DCH
by
target
one comparing
level
hand, the traffic
represents
NRT class
DCH/DCH the and
total traffic
non-EDPCH
users,
PS This
increase
MAC-d
resource
parameter without
flows
allocation have defines
changing
been
when
theset
one
threshold
the upor network
in the and
more
of the on
Thethe
stability
cell.
E-DCH
priorities
interference
other
PtxTotal
when hand,
the of the
measurementpower;
guaranteed RABs.
the hs-DSCH/DCH it is applied
that
traffic indicates
load when
and is the
hs-DSCH/E-
high
achieved. usage
PS target
The
MAC-d level
margin flows represents
for have the been the
totaldynamically total
downlink
set is upused non-EDPCH
in transmission
the
interference
DCH
of
When HSDPAusers.
interference
power the
for power.
DCH is
power;
downlink
shared
and Indication
itE-DCH
channelisthe applied traffic
type when loadascell.
between,
selection. exceeds
the
The
a trigger on
When
PS target
one
This
for the level
hand,
parameter the
adjustment represents
NRTdefinesofDCH/DCH the total
adjustment non-EDPCH
users, and periodon the
- in
the threshold
interference
the measured
interference
other
terms hand,
of
is
the
defined
shared
load
power; isit the
hs-DSCH/DCH
PtxTotal/PtxNonHSPA
withdynamic
isdynamically
below the
applied theparameter, target
between,
threshold
when
and
reporting
level
the
by on
theperiods
hs-DSCH/E-
for
this
PS DCH
BTS
one
This
margin, packet
applies
hand,
parameter
FACH the scheduling
the NRT interference
defines
usage DCH/DCH when
the
isdynamically
possible. maximumone
based
users, or more
power
and
allowed HS-
on the
interference
DCH
-DSCH
of theusers.target
MAC-d islevel
shared
flows for is DCH
set resource packet
upscheduling
in andthebetween, in theon
scheduling
cell
estimations
other
target hand,
level in
the
for the E-DCH
hs-DSCH/DCH
DCH packet allocations.
hs-DSCH/E-
when one
PS one
This hand,
parameter
(PtxTargetPS)
case of HSDPA the NRT defines
whendynamic DCH/DCH
one the or themore
resource users,
maximum
MAC-d andflows
allocation. on the
allowed
DCH
or more
other users.
hand, MAC-d the flows
hs-DSCH/DCH is set up in the
andequal cell.
hs-DSCH/E- The
PS If theparameter
is/are
This value
set upisof the
indetermined
the parameter
definescell when thebyminimum is
HSDPA set dynamic
allowed to the
target
DCH level
users. the dynamically
value
resource
target of
levelthe management
allocation
for DCH is used
packet parameter
in the
scheduling cell. "Max
Conditions
when PSone
PS adjusted
This parameter PtxTargetPS defines whenthechecked HSDPA
fixed step dynamic
size for
target
to
or adjust in
more MAC-d HSPA-DCH
PtxTargetPS flows interference
are sharing",
every nththe
resource
decreasing allocation
target is is
level used setDCH
for upthe
in inpacket
the
cell.cell. The
PS RNC
received
This
target does
parameter
level not
measurement
is adjust
defines
determined the the interference
reportby fixed
thefrom step
dynamically target,
thesize BTS, forbut
scheduling
the
where common
increasing (PtxTargetPS)
n isPtxTargetPS valuelevel
defined
target is used
by this
for when
as the
parameter.
DCH one
packet or more
static target
PS adjusted
This
MAC-d parameter
flows is defines
set up threshold
in thethe threshold
cell when
in the HSDPA
forcase the of total
value
scheduling
dynamic in the
resource UL NRT
(PtxTargetPS) DCH
allocation resource
when isfor one
used allocation.
or the
in more cell.
downlink
HSDPA
The margin transmission
dynamic for the resource power allocation. downlink
PS MAC-d
channel flows
type is set RACH
selection. up inIfthe load forindownlink
thecell threshold the case is of
channel
HSDPA
The type
dynamic
parameter selection.resource
defines the threshold When the
allocation. measured
for the load
PS exceeded, a set DCH/HS-DSCH is allocated.
is
RACHbelow the
load forisdownlink threshold by this margin, FACH
PS Measurement
This parameter
usage is possible. used forchannel
indicates the period
the channel type selection.
type
within the D
If the threshold
selection for theisSRB exceeded, in the RRC a DCH or HS-DSCH
connection
PS The
is parameter
allocated.
setup phase Measurement and defines,
for the in NRT bytes,
is used RB the infor threshold
the the RRC of data in the RLC buffers of SRB3, SRB4 and all NRT RBs that
If threshold
channel
stateparameter
The type
CELL_FACH. is exceeded,
selection
defines, Assumption for UEthe
in bytes,hereisSRB directly in thetransferred
is that
the threshold RRC a of data to Cell_DCH
in the RLC state. Otherwise,
buffers of SRB3,RNC
SRB4 sends
and data on FACH.
all NRT RBs that
PS
The
If parameter
connection
DCH is
threshold more setup
is is
efficient
exceeded,used
phase thanforand
UE the
a foridentified
FACH,
is the
directly NRT
due Smartphone
toRB fast
transferred in to instead
Cell_DCH of the TrafVolThresholdDLLow
state. Otherwise, UE sends parameter.
data on RACH.
PS This
Note: parameter
TVM indicates cells
withCELL_FACH. the The time the UEto waits un as otherwise unnecessary signalling (TVM measurement up
the
TheRRC
power state
control.
parameter isadjacent
Relative
used for to PtxTarget. areRACH
the identified good loadbe is
Smartphone same instead of the TrafVolThresholdULLow parameter.
PS measured
This parameter as thedefines isaverage
sent tothe number
the target
UE using of of
ratio anthe RRC: MEASUREMENT CONTROL message.
acknowledged
power
Note: from with
TVM UEsPRACH for which
adjacent preambles
this cellthe over
is two
to beradio
athreshold
non-
PS This parameter defines, incells
bytes, are good same as in
of data otherwise
the RLCunnecessary signalling
buffers of SRB3, SRB4(TVM measurement
and all NRT RBs that re
frames, radio
serving in proportion link and tothe the totalRACH received capacity E-DCH which
If threshold
This parameter is exceeded,
defines userUE based is directly bitalsotransferred
rate limit to Cell_DCH state. Otherwise, RNC sends data on FACH.
PS is
Thisgiven
power. Ifby
parameter this the management
targetis is exceeded
omitted if Data parameter
andSession the
Profiling feature is activated and Large Data Time timer is running for
Note:
for TVM with adjacent cells are good to be same as otherwise unnecessary signalling (TVM measurement up
PS ThisNRT
RACHCapacity
experienced services
parameter total mapped
multiplied
RTWPan
defines tooffset
isby E-DCH
two.related
higher thanthatthe must
to the be
target
exceeded
RTWP
maximum so thatfrom
signalled
received UL wide loaded
theband CRNC, statetarget forpower;
the HSPA
BTS is the
PS The
users
allowed parameter
is not
to send determines
triggered. If bit the
rate temporary
per user ismaximum
under number of HSDPA users allowed during the HSDPA preven
sum of this offsettoand a non-serving
target power radio
is used link RG
to
PS this
"Down"
The
triggerlimit, then
command.
parameter
the the UL loaded UL loaded
determines statethethe for
level HSPA users
of the estimated is non-controllable DL power to start HSDPA prevention in th
The lower
triggered if load value
of UL ofstate
isthe high
for
parameter, purposes of
enough. the fewer users are allowed during the HSDPA prevention.
HSPA users checking.
Information
If the estimated is signalled
non-controllable to the BTS power usingisthe equal or higher than the level determined (PtxTarget VCPPtxOffset)
Radio The
This
NBAP: function
parameter
Target isNon-serving
switched
is used foron/off by the
enabling\disabling
E-DCH to WCEL-VoiceCallPriority
Total E- parameter.
If the UL load is detected, the E-DCH provided
24kbps
DCH
The
bit
This ratePower Paging
parameter
is
parameter Ratio
evaluated channelinformation
provides
defines to see at
the aiflimit
cell
possibility
the level.
element.
UL
for tobituse
DC rate
HSDPA HSDPA
of prevention (TMHD) in a reactive or proactive mode.
Radio
NRT
user services
amount fordefines mappedcell activation to E-DCH is
decision. below a
Radio This
The parameter
reactive mode (default the limit 0 dB)for meansNRT HSDPA that TMHD is taken into use when the estimated non-controllable DL p
specified threshold.
amount for cell activation
This parameter defines the RT DCH power limit decision.
Radio
The
used proactive
in cell activation mode (value > 0 dB) means that TMHD is taken into use before the estimated non-controllable D
Radio This parameter definesdecision. the limit for RT HSDPA
amount
This for cell activation
parameter defines thedecision.
NRTbyHSDPA power
Radio The function is switched on/off the WCEL-VoiceCallPriority parameter.
per user limit for cell activation decision.
This parameter defines the RT HSDPA power
Radio
limit
This used in celldefines
thedecision.
Power Saving Mode
Radio
(PWSM) cell group of a cell.
This parameter defines the total power limit used
Radio
in virtual
This admission
parameter control
defines the decision.
limit for RT HSDPA
Radio
and active NRT HSDPA in cell for virtual AC
decision. RT and NRT HSDPA user amount are
compared separately to this parameter.
Radio This parameter defines the limit for DC HSDPA
user amount fordefines
This parameter cell shutdown
the limitdecision.
for NRT DCHs in
Radio
cell
Thistoparameter
be shutdown.
defines the limit for NRT HSDPA
Radio
amount
This parameter defines thedecision.
for cell shutdown limit for RT DCHs in
Radio
cell
Thistoparameter
be shutdown.
defines the limit for RT HSDPA
Radio
amount
This parameter defines thedecision.
for cell shutdown NRT HSDPA power
Radio
per
Thisuser margindefines
parameter for cell shutdown decision.
the RT DCH Power limit
Radio
used in cell shutdown decision.
This parameter defines the RT HSDPA power
Radio
limit
This used in celldefines
parameter shutdown
thedecision.
shutdown and
Radio
activation order inside one Power Saving Mode
This parameter determines if a remaining cell
Radio
(PWSM)
can be cell group.
shutdown or not.
Radio This parameter defines the HSPA configuration in
a cell.
Telecom The
HSPA0: parameter A cell definesthat is originally the absolute configured priority with level for the cell which is used in the absolute priority based cell-res
Telecom no HSPA services.
Access Class Barred list' information defines This cell can be reconfigured
The
to
whether absolute
provide HSPA
access priority
isservices
barredbased bycell
for Power
each re-selection
ofSaving
the 16 Mode procedure for idle and connected mode UEs is used in case of a c
Telecom AICH
for BTS transmission
feature when timing HSPA5 defines cells theare delay
shutdown
Access
between Classes (AC0...AC15).
Telecom Priority
due to
The ofthe
low
preamble the reception
WCDMA
traffic.partIninactivatinga of PRACHa PRACH
serving cell
original
channel isaccess
relative
HSPA5 carries slotto theonepriorities
of the 16ofdifferent
the WCDMA neighbor
orthogonal frequency
complex (WCDMA
signatures. Theinter
allo
including
cells, theClass a correctly
HSPA0 detected
cells list' shall preamble
be reconfigured and the
back
Telecom 'Access
An
transmission RACHbetween of Barred
sub-channel thedifferent
Acquisition uses
defines a binary
a access
sub-setin
Indicator notation
ofthe the
Priorities
to
The
of provide
16allowed
bits nopreamble
where HSPA services.
signatures radio use binary technologies
notation, must wherebebitunique.
0 indicates if the signature #0 is allowed, bit 1 i
total
AICH:
This set 0 of
=
parameter access
Delay is
defines slots.
0 access theThere slots;are
Application AIa total
is Aware of 12 RAN ca
Telecom -RACH bit 0 indicates whether access is barred for AC0
transmitted sub-channels.
in
Telecom Defines
A
-PRACH HSPA5:
maximum
bit 1 indicates A cell
whether ofthe that
four 1stisAICH
thesignatures
whether cell originally
access
is
access
reserved isconfigured
isallowed
slot after
barredfor operator for
for
the
toWCEL.
AC1
access slot. 1 = Delay is 1 access slot;
-provide
use.
Bit
AI bit 0 2
istoA =
HSPA services.
indicates
reserved
Sub
transmitted Channel whether
cell
in is a
Number
theMode
The
2nd access
cell shutdown
on
AICH 0 is
which barred
access
of this
camping for
slot
cell
AC2 is
Telecom The
due
When parameter
Power
HS-RACH defines
Saving (RAN1913) whether shall
is theinitiate
enabled cell is the
in barred.
the cell by using HSRACHEnabled parameter, one signature is alloc
...
not
Bit
after 1allowed,
=
the Sub PRACH except
Channel accessfor
Number particular
slot. 1Note: UEs, When if so
Telecom reconfiguration
-...bit
This If all
indicated. 15 allowed
parameter
indicates of
four
definesansignatures
whether HSPA0 theaccess cell
maximum areto provide
isconfigured
barredrangefor ofby this parameter, the lowest # of signature is allocated for HS-RA
modified,
A
-HSPA barred
If all cellislocking
cell
services
allowed a
(i.e. cell
signatures is needed.
on which
reconfiguring are not a UEa is not
HSPA0
configured cell
by to this parameter (<4), then the first free lowest # of signature is al
the
AC15 cell,
Bit 11parameter
This = Subthat is,
Channelthe
defines maximum
Number
the distance
quality 11status measure from the
Telecom allowed
modified to camp.
HSPA5 When
cell). the cell is
cell
When
(CPICH sitethe where cellUE
Ec/No, aCPICH
status UE can have
is permitted
"not
RSCP) atoradio
barred" and
beselect/re-connection
indicated"not in
Telecom "barred",
This
to the parameter
cell theincluding is not
identifies soft thethe
handover cell to
within
situations. an RNC.
If
both a
reserved"bitSIB3is set for to 1,
operator
and not SIB4, the corresponding
and use, also UE
inisSIB11 may Access select/re-
and
select
Class the cell,
NoHSPA05ReConf: even A for
cell emergency
that configured calls.
Telecom select this
Reserved
SIB12. is 'barred'.
TheCTCH cell during If a
capacity bit is
theshall set
cell
onlybe to 0,
selection
forused the
the CBS inand cell
all messages with category High. A certain amount of the total CTCH c
according
The maximum
corresponding
re-selection tosame
HSPA Access
procedures
value
cell range parameters incan
Class Idle isbe in180
'not
mode controller
km when
barred'.
and
these
DB.
in when
CTCHCapaHighPri
SIB
This messages.
parameter defines parameter the is
threshold applicable value WCEL-SABEnabled is set as Enabled.
Telecom Power
using
Connected Saving
two antennas
mode. Mode actions
(Rx Diversity to this cell
Indicator shall =which
not
1)
is
and compared
initiate
If Access
This AICH any
parameter Class to the
HSPA05
Transmission10 is
defines CPICH indicated
the Ec/No
reconfigurations.
Timing threshold has
as measurement
value
barred value 1.which
in aThe is compared to the CPICH RSCP measurement value receive
Telecom
value
maximum
cell, UEs received cell
with from the
range
Access can ClassUE be in
120
0 Cell
to km
9 Update
or when
without using an
Telecom When
This parameter the status is "not
indicatesPowerSaveHSPAType barred" and
whether the Deferred Measurement Control Reading functionality is enabled in the ce
message.
When
four
IMSI
The aresetting
antennas
threshold not parameter
(Rx
allowed
is used Diversity
to to initiate Indicator
estimate emergencywhether = 2) andcalls
or not
"reserved"
When enabled for operator
in the use, the UEs assigned to the quality
faster of the radio path
forisRel-7
goodand
enough to UEs
use the RRC:C
Telecom to
This
AICH value
in this
Access HSPA0
parameter
Transmission
cell.
Class For11 UEs orin 15
defines acell,
Timing
with cellthe
may
this
there
AccessHCS
has
functionality
has
priority
value
Classes
select/re-select to1.be atintroduces
Iflevel
AICH
11 least
to
this for RACH access newer by includin
This functionality
The threshold inspeeds
isare used upto setup times afterwithcell selection/re-selection and the gain depends on SIB contents
Telecom
one
a
If
cell
Thisthe ifanother
cell.
Transmission
15, inValue
emergency
reported
the home
parameter
cell
0Timing
indicates
calls
CPICH
defines
same
PLMN. has RSCPthe
the
Local
value
not
UEs <estimate
lowest
allowed
scaling
Cell
= 0,HCS
assigned Group
the
if both
CUCRSCPThreshold,
factor
if priority
the
tofor then the Radio Bearer Reconfiguration procedure and AM
quality of radio
PowerSaveHSPAType
and value 7 indicatespath isthe good
set to enough
highest value HCS for
HSPA5. using forthe
maximum
Access
Treselection,
The DeferredClass value 10
in of
theandCell
TreselectionPCH
Measurement range rangerelevant can
0 Control
to 9 and
and be
Access 12priority.
10
Reading
kmtoClass
14 iswill
not applied if either the value of this parameter is "Disabled" or
Telecom RRC:CELL
The
both
(11
If toparameter
two15)
the reported and
are UPDATE
fourdefines
barred.
CPICH antenna CONFIRM
the
Otherwise,
RSCP scaling message
configurations. factor
emergency
< CUCRSCPThreshold, forand
If Cell then Cell_FACH is setup otherwise Cell_DCH is setup.
behave
TreselectionFACH as if the cell in status
inter-frequency "barred" iscellindicated.
UM
Range
calls RLC-SAP
Treselection,
If HCS areis allowed
not
greater to
used, transfer
TreselectionPCH
than
for thisthose the
parameter
10km, UEs. UE
AICH and directly
is from
not needed .
Transmission
reselection defines
evaluation. whether intra-frequency
Cell/URA_PCH
TreselectionFACH
Timing should be state inand to Cell_DCH
inter-RAT cell state
reselection or not.
CUCforPCHtoDCHallowed
cell
This re-selection
parameter is1allowed
defines
Rxor
the
Diversity
(Direct
valuenot when
of
StateIndicator
CBS
Transition
the cell is From Cell_PCH to Cell_DCH) acts as an ON/OFF switch for
Telecom evaluation.
The
Note:parameter
should
barred. be 1value
This or 2. isisused usedfor incell
SIB3 selection
only when and re- offset of CTCH on FACH. The parameters N and K form CBS D
frame
KforCTCH
selection IfParameter
AccessClassRegulation
This parameter parameter
theinreported
bothdefines idle CPICH
andis the
applicable
Ec/No
isconnected
disabled
Location <when
inmode.
a cell.
area WCEL-SABEnabled
code If is set as Enabled.
Telecom Note! RACHIntraFreqMesQuant defines whether the RACH reporting quantity is CPICH RSCP or CP
CUCEcNoThreshold,
The maximum
AccessClassRegulation
(LAC) of a cell
WCDMA cell range then
cell. is the
value
enabled, Radio
(180km, Bearer
only 60km,
Access or
Telecom When
The Local
Reconfiguration
a cell's status
resource
procedure isThe
is "barred", an and
coding
objectAM
the which of the
UE
RLC-SAP
is not
is
35km)
Classes
Location
permitted depends
10
area
to code on
toselect/re-select
15 can the
(two beRNC barred
octets) specific
this with
is
cell.the license.
this
If the "Intra-
consists
used
The for
parameter of
the thestateHW
enables required
transition by one
procedure.
/ disables the cell for
Telecom parameter.
responsibility
frequency
transmission ofre-selection
celland administration.LAI
receiving.indicator" A local (Location cellisRAN2067
set
resource to theLTE Interworking feature (Cell reselection from WCDMA to LTE
This
Area
value
This is an
"allowed",
parameter Nokia-specific
Identification) the
indicatesconsists
UE mayparameter.
of PLMNid
select In
another case
and of
LAC.
cell
Telecom id
If is used
the value toofaddress
CUCforPCHtoDCHallowedthe parameterone the maximum
particular
isisNode (Direct
Enabled localDL cell
State
(1),
power
UTRA Serving Cell and E-UTRA Frequency and Priority info related
Nokia
on LAIthe
capability BTS
has
same to
forwith
be 3GPP
deleted,
frequency
a local cell interface,
if LAC
in parameter
set
selection/re-selection
the asB. 0xFFFE.
The
resource
Transition atFromthe BTS. The LCR Id is unique Listwithin
Telecom This
criteria
reference
BTS.
parameter
modification
This parameter
arepoint fulfilled.isCell_PCH
defines
requires
is also
the If the aifpart
object
antenna
tolocking.
Multiple Cell_DCH)
of
"Intra-frequency
PLMN
System
connector.
acts isasbro
Ifcell re-
an
The ON/OFF switch for this feature.
Telecom RRCparameter
Information
selection
Transmit CONNECTION Block
indicator"
Diversity also 1can
isenables
and beknown
REQUEST
set to
used / disables
"not as
in IE: local
retransmission
allowed"
the thethe
GSM-MAP RAN3069
cell, UEcoun RSRQ-based LTE Reselection feature (3GPP Rel9 quality
NAS
cannot
the system
re-select information.
even aData All
different the ADJD,
cell on ADJI
the and
same
Telecom Thisparameter
With
3GPP the TSConfiguration
parameter
Note! indicates
Parameter
25.304 defines
defines
the maximum
the maximum
themessage,
RACHIntraFreqMesQuant
UE algorithm
for
the
number theLocal
forall of
cell reselection based on the absolute priority information.
ADJS
frequency
linear
cell object
sum
resource as
of instances
the power
can barred
be inthat
associated cell. cansame
For be
to RNC,
emergency
theused cell on call,
"in
defines
This sync" indications
whether
parameter the received
RACH from
reporting L1 during
quantity the
is
Telecom defining
the this
Intra-frequency
branches.
identifier (C-ID) celldefines
as celltarget, theshall
at re-selection
maximum haveindicator number
the sameInIE"
of
establishment
CPICH
"in sync" RSCPindications ofused
or a physical
CPICH received
the
EcNo. radio
channel
from If interface.
is(UE
itparameter.
L1 CPICH
during counter the
value
is
casesignored. in
whentheir Location
"Intra-frequency
configuration Area Code
cell
is initializedre-selection at theRSCP
used
EcNo
establishmentin
thisidle mode).
parameterof of a physicalis used. If it is CPICH
indicator"
BTS, is part
the signaling SIB3/4 to
related inchannel
the
a cell case is
(UE thecounter
addressed "cell
CUCRSCPThreshold
used in connected mode). parameter is used.
barred"
using C-IDindicator
instead
When a physical dedicated channel is true.
of the Local cell resource id.
establishment
When a physical dedicated channelis initiated by the UE, the UE
starts
establishment a timer T312 is initiatedand wait by the for layer UE, the 1 toUE shall
indicate
start a timer T312 and wait for layer 1 toreceiving
N312 "in sync" indications. On indicate
N312 "in sync" indications, the physical channel
Telecom This parameter defines the maximum number of
successive
This parameter "out definesof sync"the indications
maximumreceived number of
Telecom
from L1
successive (MS "in counter).
sync" indications received fromare L1 configured for the cell.
Telecom This parameter defines how many SCCPCHs
while T313 is being activated (UE counter).
Telecom The parameter defines the maximum number of
If only one SCCPCH
cell is number
used, it of carries FACH-c, FACH-u, and PCH. If two SCCPCHs are used, the first SCCPC
Telecom Thisreselections.
parameter defines If the the periodcell of CTCH allocation on FACH carrying CTCH. This parameter along with the C
reselections during the TCrmax time period
Telecom The
This
exceedsrecommended
parameter the value defines value
of NCr, of
thehigh the
maximum transmission
mobility number
has been power
of of the SCCPCH depends on the number of SCCPCHs.
CTCH
cell capacity
reselections. is calculated
If the number by the
of cell following formula:
detected.
The parameter defines the duration
Telecom (((MaxSFN-K)/N)*sizeof(SFN))/length
The third SCCPCH
reselections during is needed
the NonHCSTcrMax only iffor SABof time
system frame, where
is available.
evaluating
MaxSFN
The parameter = the
maximum allowed
defines amount
system
the cell frameof cell
reselectionnumber = 4096 and
Telecom period
The exceeds
parameter isthe value of
needed only NonHCSNcr,
ifsize
HCS is used. high It
reselections.
sizeof(SFN)
SAB =If the
Transport number Blockof cell reselections
= 168 bits and
Telecom notcan
hysteresis
mobility
is
Controls
during
length used
the
of
also
isthe for
detected.
time
system
be usedequals
reverting
if frequency
TCrmax period
frame
with
from
of
defined
= 4096*10
2 to
idleUE
SCCPCH high-mobility
'not
schedule
by ms used'. configuration. If two SCCPCHs are used with SAB, the first SCCPCH al
messages
= the
40.96 second for Service Area Broadcast. Smaller values mean more frequ
measurements. The parameter defines
NonHCSTcrMax
=>
The CTCH
number capacity
of period
Pageexceeds NonHCSNcr,
= (((4096-K)/N)*168
Indicators high
bits)/40.96 s
Telecom additional
The
With parameter
mobilitythe is
time
default
detected. usedbefore
isvalue
needed foronly
255 cell UE ifthatreverts
HCS
selection
scheduling
canis
time
be
to low-
not
and used.
re- is the longest having long intervals in sending the block sets
period
paged
mobility
The in
parameter
maximum one
measurements.PICH isidle
number radio
not and used frame. Note:
if NonHCSTcrMax
of connected
preambles When
allowed in
Telecom selection
When in both
OffsetToBeginCTCHBSIndex parameter mode. is are
applicable when WCEL-SABEnabled is set as Enabled.
equals
one UENforCTCH
modified,
The preamble cell
moves
"not used". to >non-HCS
locking
ramping
10isand needed.
cycle.
two
highPRACH
S-CCPCHs
mobility state ifconfigured to a cell, then CTCH can be activated in this cell. CT
Preamble
Telecom The
the parameter
scrambling
number iscodeneeded for only
the if
preamble HCS is not
part used.
and
Retrans
the message Maxofis cell
part part reselections
of of "PRACHchannel.
a PRACH
during
powerthe offset"time
PRACH
Telecom period
This
The
which NonHCSTcrMax
parameter
parameter
is partcode of is defines
is used
"PRACH exceeds
the
for quality
cell NonHCSNcr.
selection threshold and level (CPICH Ec/No or CPICH RSCP) for applying prioritised hiera
re-
The
UEs parameter
scrambling
inishigh mobility isused
part
state ofsystem
for cell selection
"PRACH
apply
information
Speed info"and which list"
re- is
Telecom selection
which
This parameter
selection in
part both
of
bothissystem
in Scaling idle
System
used
idle and
and for connected
Information
TDD and list"
connected mode.
Block
GSM
mode. 5&6.
cells,is
part
The of
Dependent "PRACH
parameter is used Factor forinformation
for Treselection which
and
part
The for
of FDD cells
SIB5/6.
parameter Note: when When
is reselections.
used forcellcell selection
selection
modified,
cell selection and
cell
and
and re-re-selection
locking
re-
in both idle and connected mode.
Telecom parameter
Please notice in cell that if CPICH RSCP The is UEset exits
as from
quality measure with the WCEL-CellSelQualMeas parameter then t
selection
is needed.
selection quality
in Cell_FACH. measure is set to CPICH RSCP.
Telecom the high mobility state
The parameter is used for cell selection and re- when the number of
reselections
selection does not exceed NonHCSNcr for
in Cell_PCH/URA_PCH.
Telecom This
This
The is a hysteresis
parameter
parameter is used
is usedbetween for TDD
for FDD WCDMA cellsGSM
and andcells,
when GSM
cell
NonHCSTcrMaxHyst time.
cells.
selection
and forThe FDD hysteresis
and re-selection
cells when is notcell needed
quality
selection because
measure and is
reset
Qhyst1PCH
negative offset is usedis used.
is used for forTDD FDD andcells GSM when cells, cell
and
to
The CPICH
selection
parameter
selection Ec/No.
quality
and when is measure
needed
re-selection is
only
The set if to
HCS
parameter CPICH is not RSCP.
used.
is used
Telecom for
TheFDD parameter cells is used cell for selection
cell selection and re-selection
and re-
for cell
quality
selection selection
measure
in and
is
Cell_PCH/URA_PCH.set re-selection
to CPICH in
RSCP. Cell_FACH.
Telecom 2dB
This hysteresis
is hysteresis
The parameter
parameter between
is between
used
defines for WCDMA
thecellWCDMA selection
minimum cellsand can GSM
and
required bere-
used
cells.
selection
quality
The in urban
Hysteresis
level
parameter in both
in environment
the
is is
idle not
cell
used and needed
for to avoid
connected
(Ec/No). FDD because
cells ping-pong.
mode.
when negative
cell
Telecom This
The
0dB is hysteresis
parameter
parameter
hysteresis is
can between
defines
usedbe used theFDD
for WCDMA
minimum
in areas cells and required
when
of GSM
high cellRX
offset
selection
cells. is used.
Hysteresisand re-selection
is not needed quality measure
because is
negative set
level
selection
mobility,in
Routing the and
for cell. re-selection
example
Area Code highways. quality
determines measurethe Routing is set
Telecom The
to parameter
CPICH
offset is used.Ec/No. is used for cell selection and re-
to
areaCPICH
selectionwithin Ec/No.
the
bothlocation
innumber idle areapreamble
to whichmode. the cell
Telecom Maximum
The parameter is of and
used RACH forconnected
cellPS selection cycles
and re-of
belongs
2dB
defineshysteresis to.
how It is
many used
between times only for
WCDMA
the PRACH services
cells can
pre-amble (part
be
Telecom selection
2dB
In
PS hysteresis
case
domain in both
thatspecific
a negative idle
between NASand connected
WCDMA
acknowledgement
system cells mode.
information can bein
has
This
used
ramping parameter
in urban
procedure has can
environment impact be also
to avoid
repeated on the initial
ping-pong.
before cell
UE
used
been
SIB1).
selection in urban
received
Routing-> low environment
by
Area UE
value. on AICH to
Identification(RAI)
With high avoid
a backoff
value, ping-pong.
timer
consists
Telecom In
0dB
MAC case
Note: that
hysteresis
reports
This a a
parameternegative
can
failure be on acknowledgement
used RACH
is also used in areas of
transmission
tothecreatehigh has to
TBO1
of
been
mobility
higher
is
LAIreceived
unnecessary and started
like
layers. RAC, cellby
highways.
to
MaximumLAI determine
consists
selection
UE on AICHcan
number
when
ofastart.
PLMNid
backoff
of RACH andvalue
next
timer
Telecom for
This
0dB
RACH the parameter
parameter
hysteresis
transmission can DeltaQrxlevmin
defines be the inter-frequency
used
attempt in
will areasbetostarted.
be sent in
of high
LAC.
TBO1
preamble
SIB3/4
All
measurement is the
started
when cyclesADJD,
the to
is
used
quantity
ADJI
determine
part ofand
value
for "RACH
RACH
ADJS
when
is < the nextThe
object
transmission
-115.
measurements.
Telecom mobility
backoff
instances
This parameterlike
timer highways.
in the TBO1 same
defines is set
RNC, to an
defininginteger
theofintra-frequency thisnumber
cell as
measurement quantity for RACH measurements. It is defined in SIB
RACH
parameters"
It is definedtransmission which isattempt
part will
"PRACH be started. system The
NBO1
target,
backoff of
shall 10 in
timer ms
have SIB11,
TBO1 time SIB11bis,
theisintervals,
same
set to value
an
and
randomly SIB12
in their
integer drawn to
Routing
number
the
Telecom information
This
UE.
within parameter
Inter-frequency
an list"
interval which
controls is part of SIB5/6.
the usage results,
measurement of the which
Area
Blind
NBO1 Code
HO inparameter.
ofreports
10 RAB
msintime setup phase
intervals, (in
randomlythe Multi-Band drawnthe Load Balancing feature) requires this parameter to be set to th
RNSAP:Relocation
the
0
The<= UENB01min
timer defines <= RACH Commit
NBO1
the waiting <= procedure
messages,NB01max
time for aretheduring
based
(with on
Telecom within an interval
execution
the defined
uniform
repetition ofmeasurement
of an Inter-RNC
distribution).
the first After
RRC hard handover.
quantity.
TB01
Connection has been Setup
Telecom Note!
0
The<=timer When
NB01min defines <= valueNBO1
the of this
waiting <= parameter
NB01max
time for the isrepet
(with changed from EcNo to RSCP, the parameters that are no longer use
expired,
message
CPICHEcNoSRBMapRRC
uniform theto next
the
distribution). MS.RACH Value
After attempt
0
->
TB01 means will thatbe
CPICHRSCPSRBMapRRC
has been started.
the RRC
Telecom When
This
NB01min
Connection the and
parameter Relocation
Setup enables
NB01max Commit
retransmissionService
may be procedure
Area
set is when
Broadcast
equal
procedure used,
is in a WCDMA cell. If the parameter value is set as Enabled, Se
CUCEcNoThreshold
expired,
the MS isthenot nextallowed RACH ->toCUCRSCPThreshold
attempt
return to will
the beold started.
For
a
not
The activation
fixed
used.
Servicedelay is
Areaof RAN2527
desired,
Identifier and SABeven
(SAI) Support
to zero
identifies with
when
an 2SCCPCHs, License for legacy SAB and RAN 2527 are required.
Telecom NB01min
channel. Ifandthe NB01max
establishment may beaset
of new equal
physical when
no
area
a delay
fixed consisting
delayother isthethan
ofcode the
one(RT
desired, or onemore
and due
even to
cells topersistency
which
zero when is
Telecom channel
The service
desired. fails,
NB01max area callis used
given RB's)
asin antheis integer
dropped.
service area
belong
no delay
(cell) toother
broadcast. the same than The Location
the
area one Areato
due
where the(LAI).
persistency
Service The is
Telecom between
The
Serviceparameter
desired. 0 and
Area
NB01min 50
defines
Identifier which
is is
given the gives
GSM
composed
as an the Upper
specific
integer of the bound
threshold
PLMN for Srxlev (dB) in the serving cell used in the GSM measure
between
Area
of
Whenthe Broadcast
waiting
HCS is time
used,messages
in 10ms
the UE are
steps.
measures transmitted.
NB01max all GSM is neighbour cells, which have equal or higher HCS priority level th
Telecom Identifier,
0
Theand
SACB 50
parameter
is the
which
defined Location
gives
defines
for each Area
the Lower
thecell Code
GSM (LAC)
bound
specific which
independently of and the the
threshold
from for Srxlev (dB) in the serving cell used in the GSM measure
part
When of "RACH
HCS is transmission
not used, the parameters"
UE measures all GSM is neighbour cells of the serving
Service
waiting
When
the
part
The HCS
"location
of
Areaisin
time
"PRACH
parameter
Code10ms(SAC).
used,
reportingsystem
indicates
steps.
the area"UE NB01min
measures
(SAC).
information
the number SACBisallpart
list"
of GSM
which
steps
of aneighbour
ties is cells, which have equalcell if Srxlev
or higher in the
HCS serving
priority levelcel
th
Telecom "RACH transmission parameters" which is part of
When
cell
part to HCS
of aSIB5/6.
required certain
for is not used,
service
the defines
transmission the
area fromUE power measures
thetoService
shut all GSM neighbour cells of the serving cell if Srxlev in the serving cel
Telecom "PRACH
This
Area parameter
Broadcast system information
(or Cell the list"
cell
broadcast which
power Center) is part of
ramp
down.
System
down Information
duration for the Block
CPICH, 5&6. BCH and
Telecom service
SIB4 indicator point ofinview. SIB3Aindicates cell belongs whether to a all other
certain
SIB4 is
common
Broadcast Service
broadcasted physical in the and
Area.
cell transport
or not. channels.
Telecom This parameter sets the SIB7 expiration timer for
the
ThisUE according
parameter to the the
defines following formula:
threshold for inter-
Telecom
MAX([320ms], SIB_REP x value
frequency measurements and for the of 'SIB7
HCS
expiration
measurementtimerules.
factor').
The parameter is used for cell selection and re-

selection in idle mode.
Telecom The parameter defines the threshold for inter-
frequency
This parameter measurements defines theand for the for
threshold HCS intra-
Telecom
measurement
frequency rules.
measurements and for the HCS
Telecom The parameter defines the threshold for intra-
measurement
frequency rules.
measurements
Telecom The
This value parameter of thedefines parameter theand should for the
threshold beforHCS
between
skipping
measurement
the
inter-RAT values of rules.
the
measurement parameters rules SintrasearchConn
in HCS. The UE
Telecom The
The
UE parameter
parameter
will start theto is used
defines
neighbouring for
the cell selection
threshold
measurements and
for skipping re-
and
does
selection SsearchRATConn,
not need
in idle perform
mode. butany high enough
inter-RATm to
inter-RAT
when
manage
The CPICH
parameter cellmeasurement
EcNo
reselection.
defines < this the rules speed in HCS. dependent Above this
Telecom measurements above RAT specific threshold
RAT specific
qualmin+SintrasearchConn
scaling factor threshold
for in
Treselection, the serving
(default:
TreselectionPCH UTRA
EcNo <cell,
-8
Telecom in
Note:
The
the theUE serving
If no
parameter
does notUTRA
threshold defines
need cell.
is togiven,
the MS
threshold
perform performs
any used
inter-RAT in the measurement rules for cell re-selection when absolute prioritie
dB).
The
and parameter is used
TreselectionFACH. The scaling shall be for cell selection and re-
measurements.
measurements. is used for cell selection and
Telecom The
selection
made
The parameter
in case
parameter in connectedofdefines
isan UE
needed the
mode.
in high threshold
only HCSused
ifmobility isstate.
used. in re-
the measurement rules for cell re-selection when absolute prioritie
If
selection SrxlevServingCellin connected > Sprioritysearch1
mode. and SqualServingCell > Sprioritysearch2 then
Telecom This
-The The parameter
UE may not
parameter defines
is search
needed the for
onlyRAT-specific
orifmeasure
HCS isand inter-RAT
used. layers of lower priority.
If
Note:
The
threshold SrxlevServingCell
Thefor
parameter UEinter-RAT
performs
is used > Sprioritysearch1
inter-frequency
for cell selection
measurement rules.and SqualServingCell
re- > Sprioritysearch2 then
Telecom If
The
Note:
-selectionSrxlevServingCell
parameter
If
The UE in no maythreshold defines
not <=is Sprioritysearch1
the
given,
search for when RAT-specific
MS
or measure performs or SqualServingCell <= Sprioritysearch2 then
measurements idle continuously
mode. CPICHinter-RAT Ec/No layers of lower priority.
-threshold
The The UE
parameter shall perform measurements of inter-RAT layers of lower priority.
Telecom measurements.
If
is
The SrxlevServingCell
lower
parameterthan or is
for inter-RAT
is
used
equal
defines
used <=toforthe
for
cell selection
measurement
Sprioritysearch1
QqualMin
threshold
cell selection + for rules.and
Srxlev
and
re-
or SqualServingCell
re-(dB) in the serving <= Sprioritysearch2
cell used in thethen intra- and inter-frequency me
selection
-SintersearchConn.
The UE in
shallconnected
perform For mode.
measurements
example if QqualMin of inter-RAT
is layers of lower priority.
When
selection
If
The HCS
SrxlevServingCell
parameter in is
idle used mode.
defines and
>will Srxlev
Sprioritysearch1
the threshold in the serving
forand cell is above
SqualServingCell the threshold and
> Sprioritysearch2 the
cell used in thethen UE is not in inter-frequency
high-mobility state
Telecom GSM
-18
dB,
Themeasurements
the
UE UE performs
measures all happen
inter-frequency
intra- and when itSrxlev
is not
inter-frequency
(dB) in the serving
neighbour cells, which have
intra-
higher
and
HCS priority level than
me
t
-If The
When
possible UE HCS to
SrxlevServingCell may is
maintainnot
used search
and
a call for
Srxlev
with
>isSprioritysearch1 or inmeasure
good the serving
quality: inter-frequency
cell
and SqualServingCellis above layers
the of equal
threshold
>cells, or
and lower
Sprioritysearch2 the priority.
UE is not in high-mobility
then or higher HCS priority le state
Telecom measurements
The

Note: RRC
The If noUE CONNECTION
measures
threshold continuously all
given, REQUEST
intra- when
MS and Sintersearch
inter-frequency
performs neighbour which have equal
If

CPICH SrxlevServingCell
TheThe UE
EcNo measures
<used <=
Ssearch_RATConn Sprioritysearch1
all timer).
intra- andis or
inter-frequency SqualServingCell
neighbour <= Sprioritysearch2
cells, which have then
higher HCS priority level than t
Telecom
-measurements.
value
The
-(default:
The
UE
isHCS
retransmission
When parameter
TheUE
18
UE
may dB
shall
not
since
timer
ismeasures
defines
perform
search
CPICH
and(MS the
all the for or measure
Ec/No
UE
timer
measurements
intra- is
and in+supervising
for
Qqualmin
always
ofor
inter-frequency
high-mobility
inter-frequency
inter-frequency state, layers
the
layers
neighbour
of equal
UEcells,
measures
of equal
which
orall
lower
or have intra-
lower
priority.
and or
priority.
equal inter-frequency neighbo
higher HCS priority le
If
below
When 0
HCS EcNo
SrxlevServingCell
dB. is <
used, -14 dB).
<=
the Sprioritysearch1
UE measures all SqualServingCell
intra- and <=
inter-frequency Sprioritysearch2
neighbour then
cells of the serving cell regardles
successful
When
The HCS establishment
is used and the of a
UE physical
is in channel
high-mobility state, the UE measures all intra- and inter-frequency neighbo
Telecom Theparameter
-When UE HCS shallis notdefines
perform used, thethe timer
measurementsUE measures for supervisingof inter-frequency
theinter-RAT
inter-frequencylayers of equal cells
neighbour or lowerthe priority.
(UE
The timer
The
When UE HCS
parameter
successful shallusedissearch in used
used,
is
establishment idle for
the mode).
forinter-frequency
UE cell
of measures
a selectionall
physical and
andintra-
channel layers of
re-and inter-frequency higher priority of
neighbour at
cells ofserving
least every
the cell
serving if cell
Srxlev in the
Thigher_priority_se
regardles
Telecom The
When radioHCS link failure timer (MS timer).
selection
(this
The UE UE in is
timer
searches not
connected
is used used, the
inmode. UE measures
connected
for inter-frequency mode).
and inter-RATthe inter-frequency neighbour
layers of higher cells
priority of theevery
at least serving cell if Srxlev in the
Thigher_priority_searc
Telecom When
The RRC a physical
connection dedicated channel timer for
re-establishment
establishment
AM
Note:
When bearers
Ifa no (UE
threshold
physical is timer).
initiated
is given,
dedicated bychannel
the MS UE, the UE
performs
Telecom The
When valuethe of
cell this parameter
is barred, the needs
UE must to check
have higher value than WCEL-Threshservlow2 parameter to allow equal/l
should
measurements.
establishment start a timer
is T312
initiated and
by the wait UE, for thelayer UE 1 to
between
indicate
Each cell the
N312in a time
"in
BTS interval
sync"
uses 'Cell
indications.
a System barred On
Frame period',
receiving
Telecom should start astatus
timerof T312 and wait forhas layer 1 to
whether
N312
Number "inN312the
sync"
(SFN) indications,
counter, thewhich barred
theisphysical cell
theOn BTS channel
Frame
Telecom indicate
This
changed.parameter "in sync" indications.
defines the duration for receiving
is
N312considered
Number "in (BFN)
sync" as established
counter
indications, delayed the and by the
physical a timer
number channelT312of
evaluating
This parameter the allowed defines amount
theof cell of cell
reselection
Telecom is
is stopped
chips defined
considered and by
as reset.
the value
established Tcell.
and the timer T312
reselections.
hysteresis forIfreverting
the number ofUE
fromthreshold cellhigh-mobility
reselections
Telecom The
is
during parameter
stopped the and reset.
time defines
period the
defined by TCrmax used in the rule
measurements.
If the istimer
Tcell used T312for Theexpires
defining additional before
the start time
the period
of physical
SCH, before
Telecom exceeds
This
UE parameter
reverts Ncr, high defines
to low-mobility mobility the has
ending been
measurements. pointdetected.of the
channel
CPICH,
If is
Primary
the timerwindow. established,
T312 expires CCPCH the and UE
before DL shouldScrambling
theare consider
physical
receiving
this
Code(s)
This as a is
parameter "physical
in a cellis DL
relative
defines data
channel the frames
toonlyfailure".
BFN.
starting The expected
main
point for the
Telecom channel
The parameter established, needed the UE ifshould
HCS isconsider
used.
to
When be
purpose
receiving received
the is number
to
window before
avoid of this
cell
having
supported window
reselections
the by endpoint.
overlapping
BTS. DLduring data This
the
SCHs
Telecom this
This as
parameter a
parameter "physical
is fordefines
commonchannel how failure".
theno
channels UElonger triggers
FACH andthe
time
in
frames period
different are defined
cells
expected bytoTCrmax
belonging be to the
received same after BTS. this An
The
PCH.
exceeds parameter
reselection NCr, of a UE isnew used cellfor
continues cell
if the selection
cell
measurements reselection and re-
Telecom This
SCH
window parameter
burst start isboth256
point. is chips
used
This for
long. cell
parameter selection for and
ismode. common re-
selection
criteria
during are
thein in fulfilled
time idle
period and
during connected
the time
defined by TCrmaxHyst. interval
selection
channels
The FACH Cell_FACH. and PCH.
parameter is used for cell selection and re-
Telecom Treselection.
The values
selection can
inUARFCN be chosen as follows: 0 chips for
Cell_PCH/URA_PCH.
Telecom Parameter
The
the parameter
UE
1st triggers
cell of the isthe needed
BTS, defines
reselection
256 only the
chips ifof DL
HCS a new
for channel
is used.
the cell ifcell
2nd
The
number
the usereselection
cell of 2sthe
and reselection
DL carrier
criteria time
frequency
are may avoid
fulfilled of the
during toocell.
Telecom of
The
many
theURA
UE BTS,
cell triggers 512
identity
reselections
chips
theis the for the
identity of
reselection
between
3rd of cell
the
cellsa new ofUTRAN
and
thecell
hence ifthe
BTS,
The
time
and parameter
interval
so
Registration on. is used
TreselectionFACH.
Area. for
Overlapping cell selection
URAs can and re-
be the
the
LA/RA cell reselection
updates criteria are frequency
fulfilled during
Telecom This
RNC parameter
selection
defined. calculates
A bothwhen
inmaximum indicates
theidleUL crossing
and
of
whether
carrier
eight connected
URA
LA/RA themode. border.
serving
identities andcan cell
the
time
Thus,
belongs interval
thereto a TreselectionPCH.
are less
Hierarchical signalling Cell and
Structure less call
(HCS),
Telecom UL
The
Note:
be channel
reselection
DRXChanging
defined cyclenumber
per cell. time from
of
the parameter
length 2s the
may
used by UTRAN DL carrier
avoid
value starts too many
to count the or
failures
not.
frequency at LA/RA
reselections and a border distance
duplex
between duecells to and LA/RA
used hence update.
in theLA/RARF
cell
paging
The shutdownoccasions
reselection procedure
time for of in
discontinuous
2s maythe BTS.
avoid reception.
tooinmany
Telecom This
band. parameter is the unique
0s can country
be used areas
updates
(The
This
cell duration
parameter when
reselections crossing
of is thepart
betweenDRX the
ofconsists
SystemLA/RA
cycle
cells is
and 2 border.
<power>
Information
hencedigits. Thus,
LA/RAk
identification.
of
This high mobility,
parameter The for
is MCC
theexample
unique highways.
network of three
Telecom there
In WN6.0
frames,
Block
updates are whereless
WBTS
2. when with signalling
'k'
crossingshould
is the and
control
used
the less
DRX
LA/RA call
HSDPA cycle
border.failures
cell
length
Thus, at
MCC
RF bandtogether
identification I:inAllowed
within MNC
DLcountry.
a identifies
channel The numbersthe PLMN
MNC are
consists
Telecom the LA/RA
allocation
coefficient
This
there parameter
are(globally).border
for cases
UTRAN.)
less signalling due
where
defines whetherto the LA/RA
Minimum
and less2call update.
BaseBand
or 3failuresdigits are The at
uniquely
10562-10838.
of twoinorthe three digits. The MNC together with
reselection
Allocation
used
the LA/RA ortimeShared
Mobile
border ofdue 0s can
HSDPA
Networkto the beCode.used
Scheduler
LA/RA inupdate.
areas for of
The
MCC
high
BaseBand identifies
mobility, such
Efficiency the as PLMN highways.
are uniquely
used so that (globally).
only cells
reselection
RF band II: time
Allowed of 0sDL can channelbe used in areas
numbers are of
Transmission The belonging
high parameter
mobility, to the
such same
defines as Tcell group
the HW capacity
highways. are allocated
reserved for a RACH transport channel in the BTS. RACH Capacity is
9662-9938.
In the same In
to extremely highthe BTS
MAC-hs/ehs US allowed
load, entity.theDL channel
Cells
maximum composing capacity defined with this parameter might not always be guaranteed
numbers
a Dual Cell areHSDPA 9663-9712, cell pair 9763-9812,
must haveand the9888- same
SI 9937.
The Allowed
Tcellparameter
value. Oneenables additional
MAC-hs/ehs DL channel
the absolute entity can numbers
priorityhandle
are
one 412,
based Dual GSM 437,
Cellcell 462,
HSDPA 487,
reselection cell 512, pair.
for537, idle 562,and587, 612,
SI This
637, parameter
662, and 687.shows the size of ASN.1
connected
encoded mode
data for (Cell_PCH,
SIB11. If size
RNFC-URA_PCH) UEs.
SI This
In WN7.0parameter and onwards shows the
Nokia BTS of ASN.1 should control
SIBCapabilityCheck
RF band III: Allowed is
DL set asIf Enabled thenare
encoded
HSDPA
If the value celldata of for SIB11bis.
allocation
the parametersochannel
thatiscells RNFC- numbers
Enabled belonging (1), as to
special
1162-1513. value
SIBCapabilityCheck of this parameter
is 3set asallocated is
Enabled considered then
the Tcell
UTRA groupsCell
Serving 1 and and are
GSM Priority to
Info the one
related
size
special of SIB11
value ASN.1 encoded data is greater
MAC-hs
to theallowed entityofand
absolute thisTcell
priority parameter groups
based cell is2 considered
and 4 are as
reselection is
than
RF
size band
of SIB11bis IV: limit
Allowed and
ASN.1 DL if RNFC-
channel numbers
encoded data are:
allocated
broadcast tointhe System another MAC-hs
Information entity.is19
Block greater
Tcell
SIBCapabilityCheck
1537-1738.
than Allowed is ifset
additional as Disabled
DL channel then
groupallowed
message. mapping limit to and MAC-hs RNFC- entities is system
special
numbers valueare 1887, is considered
1912, as
1937, size of SIB11
SIBCapabilityCheck
module specific meaning is setthat in 1962,
as Disabled case there 1987,
then are
ASN.1
2012,
special encoded
2037,
value 2062,
is data and
considered is 2087.
not calculated.
as size of SIB11bis
MAC-hs entities
Default of the in two HOPG- system modules above
SI This parameter shows the size of ASN.1
SI encoded
The thresholddata for SIB12.
is used If RNFC-
in the rules for cell
SIBCapabilityCheck
reselection when is
absoluteset as Enabled
priorities are then
used. It
SI The
specialparameter
value of enables
this the absolute
parameter is priority
considered
specifies
based the
WCDMA limit for Squal
inter-frequency in the serving
cell is cell as
reselection
size
below of SIB12
which ASN.1
the UE may encodedperform data greater
cell reselection
for
than idle and connected
allowed limit andorifmode
RNFC- (Cell_PCH,
PM to
Thisa cell
URA_PCH) on an
parameter
UEs. equal
is used lower
to absolute
describe the priority
WCEL
SIBCapabilityCheck
layer. is set as Disabled then
size related characteristic in order
special value is considered as size of SIB12 to get more
accurate
If the
ASN.1 and
value of meaningful
the parameter
encoded dataIEishas statistics
is from
Enabled
not acalculated. some
(1),
Threshserving,low2
measured
UTRA Serving values Cellreported
and UTRA bymandatory
WBTS. This
FDD Frequenciesdefault
value
parameter0 dB. If the
defines value
which of the
counter WCEL-
information related to the absolute priority basedboundary value
Threshservlow2
set is used when parameter
updating
cell reselection is broadcast in System is
the 0 dB,
received values to
Threshserving,low2
individual
Information Block 19IEmessage.
counters. is not broadcast in SIB19.
This parameter is used only in performance
related
3GPP TS functions.
25.304 defines the UE algorithm for
This parameter based
cell reselection is usedon with
thethe following
absolute priority
measurements:
information.
PRACH propagation delay counters of M1006
RRC Signalling measurement.
Transmitted Carrier Power and Transmitted Code
power counters of M1000 Cell resource
measurement
See the document "RNC Counters - RNW Part"

for more information on the related counters.
0 (Enabled), 1 (Disabled), 2 (Automatic) 1 (Disabled) 1 (Disabled)

Optimised for low bit rates (0), Optimised for high
Optimised
b for low bitOptimised
rates (0) for low bit rates (0)
0...100 %, step 1 %, off (156) 90% 90%
0...10000 kbit/s, step 100 kbit/s, off (20000) 900 kbit/s 900 kbit/s
-15...15 dB, step 0.1 dB, off (200) -1 dB -1 dB
-15...15 dB, step 0.1 dB, off (200) 0 dB 0 dB
-30...0 dB, step 1 dB, off (-40) -2 dB -2 dB
0...100 %, step 1 %, off (156) 70% 70%
0...100 %, step 1 %, off (156) 50% 50%
-15...15 dB, step 0.1 dB, off (-200) -10 dB -10 dB
off (0), PICpool1 (1), PICpool2 (2), PICpool3 (3),
off (0) off (0)
PICpool4 (4)
Restrict CS and PS domain (0), Restrict PS domain Restrict PS domain Restrict
(1) PS domain (1)
-5...25 dB, step 0.1 dB 5 dB 5 dB
1...20 number, step 1 number 5 number 5 number
-15...100 dB, step 0.1 dB 3 dB 3 dB
-40...0 dB, step 0.5 dB -22 dB -22 dB
Optimisation not used (0), Optimisation used (1) 1 1
0...60 s, step 1 s 0s 0s
1...65535 s, step 1 s 3600 s 3600 s
0...100 %, step 1 % 0.25 0.25
-24...0 dB, step 0.5 dB -8 dB -8 dB
-10...17 dB, step 0.5 dB 0 dB 0 dB
Bit 0: CS AMR codec set (12.2), Bit 1: CS AMR code 0 0
Bit 0: CS WAMR codec set {12.65, 8.85, 6.6}, 0 0
0...10, step 1 5 5
-30...30 dB, step 0.1 dB 0 dB 0 dB
-10...0 dB, step 0.1 dB -1 dB -1 dB
-30...30 dB, step 0.1 dB -0.5 dB -0.5 dB
-30...0 dB, step 0.1 dB -3 dB -3 dB
1...5, step 1 1 1
0 to 359, step 1 degree 0 0
4 to 12, step 2 8 8
0 to 120000, step 10 ms 43200 43200
0 to 120000, step 10 ms 2160 2160
0...8, step 1, F-DPCH code change is not
6 6
performed. (0)
Immediate F-DPCH
Disabled (0), allocation
Enabled (1) (0), F-DPCH Disabled (0) Disabled (0)
Immediate F- Immediate F-
allocation after RRC connection setup (1), F-
DPCH allocation DPCH allocation
DPCH allocation along with user plane allocation
2 ms (0), 10 ms (1), 20 ms (2), 50 ms (3), 100 ms
(2) 200 (0)
ms (5) 200 (0)
ms (5)
0 (Disabled), 1 (Enabled) 0 (Disabled) 0 (Disabled)
HS FACH capable (0), HS FACH non capable (1), Not defined (255) Not defined (255)
Bit 0: Originating conversational call, Bit 1:
458124
Origin (0001101111110110001100b)
458124 (0001101111110110001100b)
Bit 0: Originating conversational call, Bit 1: Origin 458124 458124
Not enabled (0), Enabled (1) Not enabled (0) Not enabled (0)
Bit 0: N/A (default: 0 fixed: true), Bit 1: N/A (def 32 32
0...128, step 1 8 8
HS RACH capable (0), HS RACH non capable (1), Not defined (255) Not defined (255)
FALSE (0), TRUE (1) TRUE (1) TRUE (1)
Infinity (0), 4 (1), 8 (2), 16 (3), 24 (4), 40 (5), 80 (6 8 (2) 8 (2)
8 (0), 12 (1), 16 (2), 20 (3), 24 (4), 32 (5), 40 (6), 8 8 (0) 8 (0)
8 (0), 12 (1), 16 (2), 24 (3) 12 (1) 12 (1)
Bit 0: subchannel 0, Bit 1: subchannel 1, Bit 2: su 0 0
0...15, step 1 5 5
1 to 10, step 1 2 2
8 kbps (8), 16 kbps (16), 32 kbps (32), 64 kbps (6 384 kbit/s 384 kbit/s
8 kbps (8), 16 kbps (16), 32 kbps (32), 64 kbps (6 384 kbit/s 384 kbit/s
1...65535, step 1 40 40
1...4, step 1 1 1
Offset not used (0), Offset used (1) 0 0
0 (Enabled), 1 (Disabled), 2 (Automatic) 1 (Disabled) 1 (Disabled)
-5...10 dB, step 1 dB 2 dB 2 dB
0...511, step 1 0 0
0...30 dB, step 0.1 dB 2 dB 2 dB
0...30 dB, step 0.1 dB 0 dB 0 dB
0...30 dB, step 0.1 dB 8 dB 8 dB
0...6 dB, step 0.1 dB 0.8 dB 0.8 dB
0...50 dBm, step 0.1 dBm 43 dBm 43 dBm
-10...50 dBm, step 0.1 dBm 37 dBm 37 dBm
-5...30 dB, step 0.1 dB 4 dB 4 dB
-5...30 dB, step 0.1 dB 10 dB 10 dB
0...50 dBm, step 0.1 dBm, Not defined (65535) 43 dBm 43 dBm
-5...15 dB, step 0.25 dB 5 dB 5 dB
-5...10 dB, step 0.25 dB 3 dB 3 dB
0...10 dB, step 0.5 dB 3 dB 3 dB
0...6 dB, step 0.1 dB, Not defined (255) 0.8 dB 0.8 dB
0...6 dB, step 0.1 dB 0.8 dB 0.8 dB
-10...50 dBm, step 0.1 dBm, Not defined (32767) 38.5 dBm 38.5 dBm
-10...50 dBm, step 0.1 dBm, Use of dynamic DL
32767 dBm 32767 dBm
target
Bit
CS 0:
AMR
-10...50 power
12.2isstep
Originating
dBm, disabled
kbps (32767)
conversational
(0),dBm,
0.1 CS AMR
Valuecall,
of Bit
12.65 1: (1),is
kbps
PtxTarget
Originating
CS 0: streaming
transparent data call,
64 kbpsBit(2),
2: Originating
PS streaming 32767 dBm 32767 dBm
used
Bit (32767)
Originating conversational call, Bit 1: CS AMR 12.2 CS AMR 12.2
interactive call, Bit
64 kbps (3),streaming
Originating 3:
PS streamingOriginating
1282:kbps
call, Bit background
(4), PS
Originating call,
Bit 4: Originating subscribed traffic call,384
Bit 5: kbps (0) kbps (0)
streaming
interactive
1 antenna 256
call,
(0), 2kbps
Bit 3:(5),
antennas PS interactive
Originating
(1), 4 background
antennas kbps
(2) call, 2 antennas (1) 2 antennas (1)
Terminating conversational
(6) 4: Originating
Bit subscribedcall, Bit call,
traffic 6: Bit 5:
Terminating
0...12, streaming call, Bit 7:
step 1conversational call, Bit 6:
Terminating Terminating 0 read-only 0 read-only
interactive
Terminating call, Bit 8: Terminating
streaming call, Bit 7: background
Terminating
-3...3
call, dB,
Bit 9:step 0.1 dB call, Bit 10: Inter-RAT cell
Emergency 0 dB
66559 0 dB
66559
interactive call, Bit 8: Terminating background
re-selection, Bit 11: Inter-RAT
call, Bit 9: Emergency cell change
call (Always order, (00000100000011
0), Bit 10: 457728 (00000100000011
457728
Bit 12: Registration, Bit 13: Detach, Bit
Inter-RAT cell re-selection, Bit 11: Inter-RAT cell 14: 11111111b) 11111111b)
(00011011111100 (00011011111100
Originating
change high
order, Bitpriority signalling, Bit
12: Registration, Bit 15:
13: 00000000b) 00000000b)
0.01...0.1,
Originating step
low 0.01
priority signalling, Bit 16:signalling,
Call re- 0.04 0.04
Detach, Bit 14: Originating high priority
establishment,
UE 15:
Bit DRX Bit
capable (0),
Originating 17: Terminating
lowNot UE DRX
priority high priority
capable
signalling, Bit (1)
16: Not UE DRX capable Not
(1)UE DRX capable (1)
signalling,
Call Bit 18: Terminating
re-establishment, Bit 17: low priority high
Terminating
-50...33 dBm,
signalling, stepTerminating
Bit 19: 1 dBm cause unknown, 24 dBm 24 dBm
priority signalling, Bit 18: Terminating low priority
Bit 20:
-50...33 MBMS
dBm,
signalling, reception,
stepTerminating
Bit 19: 1 dBm Bit 21: MBMS ptp
cause unknown, RB 21 dBm 21 dBm
request,
Bit 20: MBMS reception, Bit 21: MBMS ptp RB
-50...33 dBm, step 1 dBm 21 dBm 21 dBm
request,
1...40, step 1, User amount is not checked. (0) 32 32
1...20, step 1 1 1
-24...0 dBm, step 0.5 dBm -12 dBm -12 dBm

0.01...1,
Disabledstep 0.01
(0), Periodical triggering enabled (1), 1 1
Event based triggering enabled (2), Both triggers Disabled (0) Disabled (0)
enabled (3) 1, Not defined (0)
1...100, step Not applicable Not applicable
Disabled (0), Enabled (1) DRRC enabled (1)DRRC not enabled (0)
0...10 s, step 0.5 s 2 sec 2 sec
1...100, step 1 Not defined (0) Not defined (0)
32 kbps (32), 64 kbps (64), 128 kbps (128), 256
32kbps (32) 32kbps (32)
kbps (256),
32 kbps 384
(32), 64kbps
kbps(384), 512kbps
(64), 128 kbps(128),
(512) 256
32kbps (32) 32kbps (32)
kbps
1...32,(256), 384
step 1, kbpsCapability
HSPA (384), 512Based
kbps (512)
Handover
3 3
is disabled. (0)
0...120 sec, step 1 sec 5 sec 5 sec
0...10 s, step 1 s, Not defined (255) 3s 3s
1...10, step 1, Not defined (255) 3 3
250 ms (0), 500 ms (1), 1000 ms (2), 2000 ms (3), 500 ms (1) 500 ms (1)
1...100, step 1, Not defined (0) Not applicable Not applicable
1...100, step 1, Not defined (0) 0 0%
0...16, step 1 4 4
0...6 dB, step 0.5 dB 2 dB 2 dB
0...6 dB, step 0.5 dB 1 dB 1 dB
-3...0 dB, step 0.1 dB, HSPA load state not set
-1 dB -1 dB
due to low HSDPA bit rate (127)
-3...3 dB, step 0.1 dB, HSPA load state not set
-1 dB -1 dB
due to low
0.3...1, stepE-DCH bit rate
0.1, HSPA load(127)
state not set due to
Disabledresource
(0), Periodical triggering enabled (1), 0.7 0.7
HSUPA (2)
enabled (3) 1, Not defined (0)
1...100, step 0 0
0...300 ms, step 10 ms 100 ms 100 ms
0...16383, step 1 0 0
0...100 %, step 1 % 70% 70%
0...100 %, step 1 % 70% 70%
0...255 s, step 1 s 30 s 30 s
0...255 s, step 1 s 30 s 30 s
0...255 s, step 1 s 30 s 30 s
0...255 s, step 1 s 30 s 30 s
0...255, step 1 10 10
0...100 %, step 1 % 50% 50%
0...10 s, step 1 s 2s 2s
0...10 s, step 1 s 2s 2s
0...10 s, step 1 s 2s 2s
0...10 s, step 1 s 2s 2s
0...255, step 1 10 10
0...32, step 1, Inter-frequency LHO is not active
0 0
in this cell.
0...32, step (0)
1, The inter-RAT LHO is not active in
0 0
this cell. (0)
-30...0 dB, step 0.1 dB -1.5 dB -1.5 dB
-10...0 dB, step 0.1 dB -0.7 dB -0.7 dB
0...100 %, step 1 % 80% 80%
1...60 s, step 1 s 5s 5s
1...60 s, step 1 s 5s 5s
1...60 s, step 1 s 5s 5s
1...60 s, step 1 s 5s 5s
0...60 s, step 1 s, load-based HO trigger is not
0s 0s
used in this cell. (0)
0...60 s, step 1 s 0s 0s
0...60 s, step 1 s 0s 0s
0...60 s, step 1 s 0s 0s
-25...0 dB, step 1 dB -25 dB -25 dB
-25...0 dB, step 1 dB 0 dB 0 dB
Disabled (0), Enabled for T1 (1), Enabled for T1 Disabled (0) Disabled (0)
and T2 (2), Enabled for T1 and T3 (3),
1...50 dBm, step 1 dBm, WCDMA cell load is not Enabled 31 dBm 31 dBm
for T1, T2(0)
checked. and T3 (4), Enabled for T1 and T4 (5),
Measurement
Enabled for T1,forT2periodic
and T4trigger (0), for T1,
(6), Enabled Measurement for Measurement for
Measurement
T3 and T4 (7), for all triggers
Enabled for (1)
all triggers (8) periodic trigger (0) periodic trigger (0)
0...255, step 1 16 16
0...32, step 1 6 6
0...127, step 1 10 10
0...31, step 1 5 5
0 (Disabled), 1 (Enabled) Disabled (0) Disabled (0)
0 (Disabled), 1 (Enabled) Disabled (0) Disabled (0)
disabled (0), enabled
0 (Disabled), when UE is in
1 (Enabled) enabled when
Disabled (0)UE enabled when
Disabled (0)UE
Cell_FACH/Cell_PCH state (1), enabled when is in is in
UE is in Cell_DCH state (2), enabled when UE is Cell_FACH/Cell_P Cell_FACH/Cell_P
0 (Disabled),
in 1 (Enabled)
Cell_DCH/Cell_FACH/Cell_PCH (3) Disabled
CH (0)
state (1) Disabled
CH (0)
state (1)
Bit 0: CPICH EcNo/CPICH RSCP, Bit 1: UE Tx 0 0
Disabled (0), Periodical triggering enabled (1),
Power, Bit 2: DL BLER, Bit 3: UE RxTx time
difference/BTS RTT, Bit 4: SIR and SIR Error, Bit
enabled (3)
5: CS GPS, Bit 6: PS GPS, Bit 7: Call Type
Selection, Bit 8: Spare, for future use (Always 0),
Bit 9: Spare, for future use (Always 0), Bit 10:
Spare, for future use (Always 0), Bit 11: Spare,
for future use (Always 0), Bit 12: Spare, for future
use (Always 0), Bit 13: Spare, for future use
(Always 0), Bit 14: Spare, for future use (Always
1...100, step 1, Not Defined (0) Not applicable Not applicable
1...100, step 1, Not Defined (0) 0 0
1...50, step 1, No reference to PFL object (0) 0 0
0...4, step 1 0 0
0...4, step 1 0 0
0...4, step 1 0 0
0...4, step 1 0 0
0...4, step 1 0 0
0...4, step 1 0 0
0...4, step 1 0 0
0...4, step 1 0 0
0...4, step 1 0 0
0...4, step 1 0 0
0...4, step 1 0 0
0...4, step 1 0 0
0...4, step 1 0 0
0...4, step 1 0 0
0...4, step 1 0 0
0...4, step 1 0 0
1...100, step 1, Not Defined (0) Not applicable Not applicable
1...100, step 1, Not Defined (0) 0 0
1...100, step 1, Not defined (0) 0 0
1...100, step 1, Not defined (0) 0 0
1...100, step 1, Not defined (0) 0 0
0...32, step 1 1 1
0...32, step 1 1 1
0...120 s, step 1 s, Inter-frequency SHO is not
0s 0s
active
0...120ins,this
stepcell.
1 s,(0)
The inter-RAT SHO is not
0s 0s
active in this cell. (0)
disabled (0), enabled for T1 (1), enabled for T1 an disabled (0) disabled (0)
-115...-25 dBm, step 1 dBm 0 dBm 0 dBm
redirection allowed to all neighbors (0), redirecti
redirection allowed to
redirection
all neighbors
allowed
(0) to all neighbors (0)
5...255, step 1 0 0
1...100, step 1 0 0
1...100, step 1 0 0
0...6 dB, step 0.1 dB 1 dB 1 dB

0 (0), 1 (1), 2 (2), 3 (3), 4 (4), 5 (5), 6 (6), 7 (7), 8
(8), 9 (9), 11 (10), 13 (11), 15 (12), 17 (13), 19 2 (2) 2 (2)
(14)
-130...-50 dBm, step 0.1 dBm -105 dBm -105 dBm
Autotuning algorithm off (0), Autotuning algorithm
1 1
on (1)
0...6 dB, step 0.1 dB 1 dB 1 dB
0...30 dB, step 0.1 dB 4 dB 4 dB
0...30 dB, step 0.1 dB, Use of dynamic UL target
0 (0), 1is(1), 2 (2), 3 (65535)
(3), 4 (4), 5 (5), 6 (6), 7 (7), 8 65535 dB 65535 dB
power disabled.
(8), 9 (9), 11 (10), 13 (11), 15 (12), 17 (13), 19 2 (2) 2 (2)
(14)
0...6 dB, step 0.1 dB 1 dB 1 dB
-10...50 dBm,
0 (0), 1 (1), step3 0.1
2 (2), (3),dBm
4 (4), 5 (5), 6 (6), 7 (7), 8 40 dBm 40 dBm
(8), 9 (9), 11 (10), 13 (11), 15 (12), 17 (13), 19 11 (10) 11 (10)
(14) Override allowed Override allowed
Override not allowed (0), Override allowed (1)
(1) (1)
Locked (0), Unlocked (1) Locked (0) Not applicable

4...23, step 1, The cell is not connected to any
0 0
CMOB. (0)
Enabled (0), Disabled (1), Not defined (255) Not Applicable Not Applicable
Enabled (0), Disabled (1), Not defined (255) Not applicable Not applicable
EVAM non EVAM non
EVAM capable (0), EVAM non capable (1)
capable (1) capable (1)
HSDPA capable (0), HSDPA non capable (1), Not
defined (255)
Enabled (0), Disabled (1), Not defined (255) Not applicable Not applicable
ICR capable (0), ICR non capable (1) ICR non capable (1)ICR non capable (1)
4...23, step 1, The cell is not connected to
Not defined (0), Network originated configuration any
0 0
CMOB.
action (0)NetAct
4...23, (1),
step 1, TheRNW
cell isplan originated to any
not connected
configuration 0 0
CMOB. (0) action
Bit 0: BL-USER, (2),BL-WF-IUB,
Bit 1: Element Manager
Bit 2: BL-FL-
originated
IUB, Bit 3: configuration
BL-WBTS, Bitaction (3), Configuration
4: BL-SHUTDOWN, Bit Not applicable Not applicable
5: BL-SYSTEM, Bit 6: BL-INIT, Bit 7: BL-FL- Element 0 0
Manager originated
LINK, Bit 8: mass config
BL-FL-MEAS, action (5),
Bit 9: BL-LO-WBTS,
NetAct originated direct
Bit 10: BL-NO-CELL, BitRNW change (6)
11: BL-POWER,
Not supported (0), Supported (1) Supported (1) Supported (1)
-35...-10 dB, step 1 dB -25 dB -25 dB
-10...5 dB, step 1 dB -8 dB -8 dB
-5...10 dB, step 1 dB -3 dB -3 dB
0...6 dB, step 0.25 dB 2 dB 2 dB
0...6 dB, step 0.25 dB 3 dB 3 dB
0...6 dB, step 0.25 dB 4 dB 4 dB
-22...5 dB, step 1 dB -3 dB -3 dB
-35...15 dB, step 0.1 dB 7 dB 7 dB
-35...15 dB, step 0.1 dB -2 dB -2 dB
-32...31.75 dB, step 0.25 dB -11 dB -11 dB
-32...31.75 dB, step 0.25 dB -5 dB -5 dB
-32...31.75 dB, step 0.25 dB 0 dB 0 dB
-32...31.75 dB, step 0.25 dB 0 dB 0 dB
-32...31.75 dB, step 0.25 dB -11 dB -11 dB
-32...31.75 dB, step 0.25 dB 0 dB 0 dB
-35...15 dB, step 0.1 dB -5 dB -5 dB
-35...15 dB, step 0.1 dB -3 dB -3 dB
-35...15 dB, step 0.1 dB 0 dB 0 dB
-35...15 dB, step 0.1 dB -5 dB -5 dB
-35...15 dB, step 0.1 dB -2 dB -2 dB
-35...15 dB, step 0.1 dB -2 dB -2 dB
-35...15 dB, step 0.1 dB -3 dB -3 dB
5...18, step 1 10 10
0...2550 ms, step 10 ms 500 ms 500 ms

Allowed (0), Denied (1) 0 0
10...1000 ms, step 10 ms 300 ms 300 ms
Disabled
DC-HSDPA (0),and
Enabled
MIMO(1)
disabled (0), DC-HSDPA Disabled (0)
DC-HSDPA and Disabled (0)
DC-HSDPA and
and MIMO w/o 64QAM enabled (1), DC-HSDPA MIMO disabled MIMO disabled
and MIMO(0),
Disabled with 64QAM(1)enabled (2)
Enabled (0) (0)
Disabled (0) (0)
Disabled
0...5 dB, step 0.2 dB 2 dB 2 dB
0...5 dB, step 0.2 dB 1.2 dB 1.2 dB
0...5 dB, step 0.2 dB 0.8 dB 0.8 dB
0...5 dB, step 0.2 dB 1.2 dB 1.2 dB
4 frames (0), 8 frames (1), 16 frames (2), 32 frame 16 frames (2) 16 frames (2)
1...120 s, step 1 s 2s 2s
0...120, step 1 4 4
0...120, step 1 29 29
0...10 %, step 1 % 0.05 0.05
0...100 %, step 1 % 0.75 0.75
0.2...5 s, step 0.2 s, Activity measurement is not
0.2 sec 0.2 sec
active (0) 10 ms (10), 20 ms (20), 40 ms (40), 60
0 ms (0),
8000...1800000 bps, 100
ms (60), 80 ms (80), stepms8000 bps120 ms
(100), 128000 bps 128000 bps
(120), 160 ms (160), 200 ms (200), 240 ms 100 ms (100) 100 ms (100)
0 ms (0),
(240), 10ms
320(0),ms(320),
(10), 640
20 msms(20), 401280
(640), ms (40),
ms 60
Disabled
ms (60),2560
80 msEnabled (1) ms Disabled (0) Disabled (0)
(1280), ms(80), 100
(2560), 5000(100), 120 ms
ms (5000)
(120), 160 ms (160), 200 ms (200), 240 ms 200 ms (200) 200 ms (200)
(240), 320 ms (320), 640 ms (640), 1280 ms 512 bytes (512) 512 bytes (512)
Infinity (0), 8 bytes (8), 16 bytes (16), 32 bytes
(1280), 2560 ms (2560), 5000 ms (5000)
QoS prioritization is not in use for HS transport
Not supported
(0), QoS (0), Supported
prioritization (1) HS NRT
is used for Not
QoSsupported (0) Not
prioritization QoSsupported (0)
prioritization
channels (1), HSPA streaming is in use (2), is not in use for is not in use for
HSPA CSms,
0...5000 voice
step is 100
in use
ms(3), HSPA streaming HS transport
0 ms (0) HS transport
0 ms (0)
and CS voice are in use (4)
0.2...5 s, step 0.2 s 0.2 s 0.2 s
8000...1400000 bps, step 8000 bps 96000 bps 96000 bps
0 ms (0), 10 ms (10), 20 ms (20), 40 ms (40), 60 0 ms (0) 0 ms (0)
1...10, step 1 3 3
120 kbps, SF32 (1), 240 kbps, SF16 (2), 480 kbps,240 kbps, SF16 (2) 240 kbps, SF16 (2)
-6...13 dB, step 0.5 dB 6 dB 6 dB
0 ms (0), 10 ms (10), 20 ms (20), 40 ms (40), 60 100 ms (100) 100 ms (100)
0 bytes (0), 8 bytes (8), 16 bytes (16), 32 bytes 512 bytes (512) 512 bytes (512)
Disabled (0),
8 kbps (8), 16Enabled
kbps (16),(1)32 kbps (32), 64 kbps Disabled (0) Disabled (0)
(64),
8 kbps128
(8),kbps (128),(16),
16 kbps 25632kbps (256),
kbps (32),384 kbps
64 kbps 64 kbps (64) 64 kbps (64)
(384)
(64), 128 kbps (128), 256 kbps (256), 384 kbps 64 kbps (64) 64 kbps (64)
(384)
Bit 0: Increased TVM pending time, Bit 1: Tempora 0 0
1...1024, step 1, Number of E-DCH allocations is
0 0
not restricted (0)
1...1023, step 1 Number of E-DCH Number of E-DCH
1...255, step 1, Number of HSDPA users is not users is not users is not
0 0
restricted. (0)
1...1024, step 1, Number of HS-DSCH MAC-d restricted. (0) restricted. (0)
0 0
flows is not restricted. (0)
1...512, step 1, Number of HSDPA users is not
0 0
restricted. (0) 1, Number of HSDPA users is not
1...1024, step
0 0
restricted. (0) (0), 1920 kbps, 2*SF4 (1), 3840
960 kbps, SF4
960 kbps, SF4 (0) 960 kbps, SF4 (0)
kbps, 2*SF2 (2), 5760 kbps, 2*SF2 + 2*SF4 (3)
0...900 s, step 1 s 30 s 30 s
0...20, step 1 10 10
1...512, step 1 MIMO30 with MIMO30 with
MIMO with 64QAM disabled (0), MIMO with
8 kbps (8), 16 kbps 64QAM disabled 64QAM disabled
64QAM enabled (1) (16), 32 kbps (32), 64 kbps
0 bytes
(64), 128(0), 8 bytes (1), 16 bytes (2), 32 bytes (0) (0)
8 kbps
(3), 64 (8),kbps
bytes 16(4),(128),(16),
kbps
128
25632
bytes
kbpskbps
(5),
(256),
256(32),384 kbps
64 (6),
bytes kbps 8 kbps (8) 8 kbps (8)
(384)
0 bytes
(64), 128(0),
kbps8 bytes
(128),(1),
25616kbps
bytes(256),
(2), 32
384bytes
kbps
512 bytes (7),(4),
1024 bytes. 1(5),
KB256(8), bytes
2048 bytes. 8 kbps (8) 8 kbps (8)
(3),
(384)64 bytes 128 bytes (6),
2 KBbytes
512 (9), 3072 bytes.bytes.
(7), 1024 3 KB1(10), 4096
KB (8), bytes.
2048 4
bytes. 1024 bytes 1024 bytes
KB (11), 6144 bytes. 6 KB (12), 8192
2 KB (9), 3072 bytes. 3 KB (10), 4096 bytes. 4 bytes. 8 KB 1024 bytes 1024 bytes
(13),
KB 12288
(11), 6144 bytes.
bytes.126KB KB (14),
(12), 16384
8192 bytes. 816KB
bytes.
0...10,
KB (15)step 1bytes. 12 KB (14), 16384 bytes. 16 2 2
(13),
0...6012288
s, step 1 s, Enhanced overload control is
KB 60 s 60 s
not (15)
active. (60)
0...60 s, step 1 s 10 s 10 s
0...60 s, step 1 s 20 s 20 s
0...60 s, step 1 s 30 s 30 s
0...60 s, step 1 s 15 s 15 s
0...30 dB, step 0.1 dB 2 dB 2 dB
0...30 dB, step 0.1 dB 6 dB 6 dB
0...30 dB, step 0.1 dB 4 dB 4 dB
0...30 dB, step 0.1 dB, Value set by the PrxTarge 32767 dB 32767 dB
0...30 dB, step 0.1 dB 4 dB 4 dB
0...1 dB, step 0.1 dB 0.5 dB 0.5 dB
0...1 dB, step 0.1 dB 0.5 dB 0.5 dB
0...2 dB, step 0.1 dB 0.5 dB 0.5 dB
1...255, step 1, PtxTarget is used as target for
5 5
NRT DCH scheduling (0)
0...40 dBm, step 0.1 dBm, Value set by the PrxTa 32767 dBm 32767 dBm
0...5 dB, step 0.1 dB 1 dB 1 dB
0...5 dB, step 0.1 dB 1 dB 1 dB
-5...0 dB, step 0.1 dB -1 dB -1 dB
0...10 %, step 1 % 0.05 0.05
0...100 %, step 1 % 0.75 0.75
1 frames (0), 2 frames (1), 4 frames (2), 8 frames 1 frames (0) 1 frames (0)
0 bytes (0), 8 bytes (8), 16 bytes (16), 32 bytes ( 256 bytes (256) 256 bytes (256)
0 bytes (0), 8 bytes (8), 16 bytes (16), 32 bytes ( 256 bytes (256) 256 bytes (256)
100 ms (0), 200 ms (1), 400 ms (2), 800 ms (3) 100 ms (0) 100 ms (0)
0...100
0 bytes %,
(0),step 1 % (8), 16 bytes (16), 32 bytes
8 bytes 30% 30%
(32), 64 bytes (64), 128 bytes (128), 256 bytes 128 bytes 128 bytes
(256), 512 bytes (512), 1 KB (1024) 8 kbps 8 kbps
0...128 kbps, step 1 kbps
-3...3 dB, step 0.1 dB, UL loaded state for HSPA
-0.5 dB -0.5 dB
users deactivated (127)
0...6 dB, step 0.1 dB 0 dB 0 dB

0...300, step 1 10 10
0...300, step 1 10 10
0...50 dBm, step 1 dBm 37 dBm 37 dBm
0...300, step 1 0 0
0...6, step 1, The cell does not belong to any
0 0
PWSM cell group. (0)
0...300, step 1 5 5
0...300, step 1 5 5
0...128, step 1 10 10
0...300, step 1 5 5
0...128, step 1 10 10
0...300, step 1 5 5
0...3, step 1, The cell is a remaining cell in
0 0
PWSM. (0)
NO (0), YES (1) NO (0) NO (0)
NoHSPA05ReCon NoHSPA05ReCon
NoHSPA05ReConf (0), HSPA0 (1), HSPA5 (2)
f (0) f (0)
Bit 0: step
0...7, signature
1 #0 allowed, Bit 1: signature #1 0 0
allowed, Bit 2: signature #2 allowed, Bit 3:
Bit
Bit 0:
0: Access
Sub #3
signature Class Number
Channel
allowed, 0, Bit
Bit 4:
1: signature
Access
0, Bit 1: Class
Sub 1, Bit 2
#4 allowed, 0 0
Channel
Bit 5: step
0...1, Number
signature
1 #51,allowed,
Bit 2: Sub Bit Channel Number
6: signature #6 0 0
2, Bit 3: Sub
allowed, Bit 7:Channel
signature Number 3, Bit 4:
#7 allowed, BitSub
8:
Channel 15 15
signatureNumber
#8 allowed,4, BitBit
5:9:Sub Channel
signature #9Number
allowed,
5,
BitBit
10:6:signature
Sub Channel Number Bit
#10 allowed, 6, Bit
11:7: Sub
signature 4095 4095
Channel
#11 Number
allowed , Bit 7,
12: Bit 8: Sub
signature
AAR Capable (0), AAR Not Capable (1) Channel
#12 Number
allowed, Bit AAR Not Capable (1)
AAR Not Capable (1)
8,
13:Bit 9: Sub Channel
signature #13 allowed,Number 9, Bit
Bit 14: 10: Sub#14
signature
Reserved
Channel (0),
15:Not
Number
allowed, Bit reserved
10, Bit 11:
signature #15(1)
Sub Channel
allowed, 1 1
Number 11,
Barred (0), Not barred (1) 1 1
100...180000 m, step 100 m Not applicable 10 km
CPICH Ec/No (0), CPICH RSCP (1) CPICH Ec/No (0) CPICH Ec/No (0)
0...100, step 1 0 0
0...49, step 1 31 31
0...7, step 1 0 0
1...4.75, step 0.25 1 1
1...4.75, step 0.25 1 1
Allowed (0), Not allowed (1) 0 0
0...255, step 1 0 0
0...50 dBm, step 0.1 dBm, Not defined (65535) Not applicable
Multiple PLMN Not applicable
Multiple PLMN
Multiple PLMN List not broadcasted (0), Multiple
List not List not
PLMN List broadcasted (1)
0...7, step 1 broadcasted
3 (0) broadcasted
3 (0)
1 (0), 2 (1), 4 (2), 10 (3), 20 (4), 50 (5), 100 (6),
4 4
200
1 (0),(7), 4004(8),
2 (1), (2),600 (9), 20
10 (3), 800(4),
(10),
50 1000 (11)(6),
(5), 100
4 (2) 4 (2)
200 (7), 400 (8), 600 (9), 800 (10), 1000 (11)
1 (0), 2 (1), 4 (2), 10 (3), 20 (4), 50 (5), 100 (6),
20 20
200
1 (0),(7)
50 (1), 100 (2), 200 (3), 400 (4), 600 (5),
1 1
800 (6), 1000 (7), 2 (8), 4 (9), 10 (10), 20 (11)
1...3, step 1 1 1
1...16, step 1 8 8
1...256, step 1 2 2
1...16, step 1 8 8
Not used (0), 30 s (1), 60 s (2), 120 s (3), 180 s
Not used (0) Not used (0)
(4),
Not 240
useds (0),
(5) 10 s (1), 20 s (2), 30 s (3), 40 s (4),
Not used (0) Not used (0)
50 s (5), 60 s (6), 70 s (7)
3...255, step 1 255 255
18 (0), 36 (1), 72 (2), 144 (3) 72 72
1...64, step 1 8 7
0...15, step 1 0 0
-24...0 dB, step 0.5 dB -24 dB -24 dB
-24...0 dB, step 1 dB -18 dB -18 dB
1...32, step 1 4 4
0...50, step 1 50 50
0...50, step 1 20 20
EcNo (0), RSCP (1) RSCP (1) RSCP (1)
EcNo (0), RSCP (1) EcNo (0) EcNo (0)
Not used (0), Used (1) 0 0
Not used (0), 100 ms (1), 200 ms (2), 300 ms (3),
600 ms (6) 600 ms (6)
400 ms (4), 500 ms (5), 600 ms (6)
Not used (0), 800 ms (1), 900 ms (2), 1000 ms (3) 1200 ms (5) 1200 ms (5)
0...65535, step 1, The value must be checked
0 0
before activating SAB. (0)
-1...91 dB, step 2 dB -1 dB -1 dB
-1...91 dB, step 2 dB -1 dB -1 dB
1...16, step 1 10 10
5...45 s, step 5 s 15 seconds 15 seconds
SIB4 not SIB4 not
SIB4 not broadcasted (0), SIB4 broadcasted (1)
1 (0), 2 (1), 4 (2), 8 (3), 16 (4), 32 (5), 64 (6), 128 broadcasted (0) broadcasted (0)
1 1
(7), 256 (8)
0...20 dB, step 2 dB 10 dB 10 dB
0...20 dB, step 2 dB 10 dB 10 dB
0...1, step 0.1 0.7 0.7
0...62 dB, step 2 dB 14 dB 14 dB
-1...91 dB, step 2 dB -1 dB -1 dB
100 ms (0), 200 ms (1), 400 ms (2), 600 ms (3),
-1...91
800 msdB,(4),step
10002 ms
dB (5), 1200 ms (6), 1400 ms -1 dB -1 dB
(7), 1600 ms (8), 1800 ms (9), 2000 ms (10), 2000 ms (10) 2000 ms
3000
1...15ms (11),14000
s, step s ms (12), 6000 ms (13), 8000 10 s 6s
ms (14)
1...15 s, step 1 s 1s 1s
0...15 s, step 1 s 3s 3s
0 s (0), 10 s (1), 30 s (2), 60 s (3), 180 s (4), 600
10 s (1) 10 s (1)
s10(5), 1200
s (0), 20s256
s(6), 1800
(1),chips s (7)80 s (3), 160 s (4),
40 s(1),
(2),
0 chips (0), 512 chips (2), 768 40 s 40 s
320 s (5), 640 s (6), 1280
chips (3), 1024 chips (4), 1280 s (7) chips (5), 1536
chips (6), (0),
Not used 179230chips
s (1),(7),
60 2048
s (2), chips
120 s(8),
(3),2304
180 s
chips (9) 60 seconds 60 seconds
(4), 240 s (5)
Not used (0), 10 s (1), 20 s (2), 30 s (3), 40 s (4),
0s 0s
50 s (5), 60 s (6), 70 s (7)
0...10 ms, step 1 ms 10 ms 10 ms
0...199 ms, step 1 ms 25 ms 25 ms
2 s, high mobility
0...31 s, step 1 s 0s
0s
0...6.2 s, step 0.2 s 2s 2s
0...31 s, step 1 s 2s 2s
Not used (0), Used (1) 0 0
80 ms (3), 160 ms (4), 320 ms (5), 640 ms (6),
640 ms (6) 640 ms (6)
1280 ms (7), 2560 ms (8), 5120 ms (9)
2...3, step 1 2 Not applicable
1 message (1), 2 messages (2), 3 messages (3),

2 2
4 messages (4)

16...3331, step 1 SIB Size is not SIB Size is not
0...3331, step 1 available
SIB Size (9999)
is not available
SIB Size (9999)
is not
available (9999) available (9999)
0...3331, step 1 SIB Size is not SIB Size is not
0...31 dB, step 1 dB available
0 dB(9999) available
0 dB(9999)
5 km (1), 10 km (2), 20 km (3), 60 km (4), 180 km

20 km (3) 20 km (3)
(5)
MACRO HSDPA 3.6 - F1 MACRO HSDPA 7.2 Light
MACRO HSDPA 1.8 - F1
WITH HSUPA with HSUPA - F1
UMTS2100 UMTS2100 UMTS2100
1 (Disabled) 1 (Disabled) 1 (Disabled)

Optimised for low bit rates (0)Optimised for low bit rates (0)Optimised for low bit rates (0)
90% 90% 90%
900 kbit/s 900 kbit/s 900 kbit/s
-1 dB -1 dB -1 dB
0 dB 0 dB 0 dB
2 dB 2 dB 2 dB
-2 dB -2 dB -2 dB
70% 70% 70%
-2 dB -2 dB -2 dB
-1 dB -1 dB -1 dB
0 dB 0 dB 0 dB
50% 50% 50%
-10 dB -10 dB -10 dB
-10 dB -10 dB -10 dB
-10 dB -10 dB -10 dB
off (0) off (0) off (0)
Restrict PS domain (1) Restrict PS domain (1) Restrict PS domain (1)
5 dB 5 dB 5 dB
5 number 5 number 5 number
3 dB 3 dB 3 dB
-22 dB -22 dB -22 dB
1 1 1
0s 0s 0s
3600 s 3600 s 3600 s
0.25 0.25 0.25
-9 dB -9 dB -9 dB
-92 dBm
0dB for CEC in CEC, 0dB -92 dBm
0dB for CEC in CEC, 0dB -92 dBm
0dB for CEC in CEC, 0dB
for ROC in ROC, 0dB for for ROC in ROC, 0dB for for ROC in ROC, 0dB for
CEC in0 ROC CEC in0 ROC CEC in0 ROC
1 1 1
5 5 5
-1 dB -1 dB -1 dB
-3 dB -3 dB -3 dB
-1 dB -1 dB -1 dB
-5 dB -5 dB -5 dB
5 5 5
0 0 0
8 8 8
43200 43200 43200
2160 2160 2160
Enabled (1)6EXCEPT for Enabled (1)6EXCEPT for Enabled (1)6EXCEPT for

ATM sites wthout HSPA ATM sites wthout HSPA ATM sites wthout HSPA
Immediate
VCCF-DPCH Immediate
VCCF-DPCH Immediate
VCCF-DPCH
allocation (0) allocation (0) allocation (0)
200 ms (5) 200 ms (5) 200 ms (5)
Disabled (0) Disabled (0) See embedded comments
Enabled (1) Enabled (1) Not enabled (0)
Enabled (1) Enabled (1) Disabled (0)
Not defined (255) Not defined (255) Not defined (255)
458124 (0001101111110110001100b)
458124 (0001101111110110001100b)
458124 (0001101111110110001100b)
458124 458124 458124
Not enabled (0) Enabled (1) Not enabled (0)
32 54560 (15,14,12,10, 8, 5 codes enabled)
1312 (10, 8, 5 codes enabled)
8 8 8
TRUE (1) TRUE (1) TRUE (1)
8 (2) 8 (2) 8 (2)
8 (0) 8 (0) 8 (0)
12 (1) 12 (1) 12 (1)
0 0 0
5 5 5
Disabled (0) Disabled (0) See embedded comments
2 2 2
25 25 25
1 3 2
1 1 1
2 dB 2 dB 2 dB
0 0 0
2 dB 2 dB 2 dB
0 dB 0 dB 0 dB
8 dB 8 dB 8 dB
43 dBm for 0.8 dB and Flexi 43 dBm for

Ultra 0.8 dB and Flexi 43 dBm for
Ultra 0.8 dB and Flexi
Ultra
sites
40 dBm (20forWatt
CECPA) and 39
in CEC, sites
40 40 dBm (20forWatt
CECPA) and 39
in CEC, sites
CECPA) and 39
in CEC, 40
dBm for Metros (8 Watt
dBm for ROC in ROC, 40 PA) dBm for Metros (8 Watt
dBm for ROC in ROC, 40 PA) dBm
dBm for ROC in ROC, PA)
for Metros (8 Watt 40
dBm for CEC4 dB in ROC dBm for CEC4 dB in ROC dBm for CEC4 dB in ROC
10 dB 10 dB 10 dB
37.8 dBm for 20W PA, 33.8 dBm
43for
dBm8Wfor
PA20W PA, 39 dBm for 8W PA 39 dBm (8W)
5 dB 5 dB 5 dB
0 dB 0 dB 0 dB
0 dB 0 dB 0 dB
1 dB 1 dB 1 dB
0.8 dB 0.8 dB 0.8 dB
40.5 dBm 37
for dBm
Ultra and Flexi 40.5 dBm 37
for dBm
for dBm
Ultra and Flexi
sites (20 Watt PA) and 36.5 sites (20 Watt PA) and 36.5 sites (20 Watt PA) and 36.5
dBm for32767
MetrodBm
(8 Watt PA) dBm for32767
MetrodBm
MetrodBm
(8 Watt PA)
32767 dBm 32767 dBm 32767 dBm

CS AMR 12.2 kbps (0) CS AMR 12.2 kbps (0) CS AMR 12.2 kbps (0)
2 antennas (1) 2 antennas (1) 2 antennas (1)
1-6 as appropriate 1-6 as appropriate 1-6 as appropriate
0 dB 0 dB 0 dB
4194303 4194303 4194303
11264
(1111111111111111111111b) 11265
(1111111111111111111111b) 11264
(1111111111111111111111b)
(000000001011000000000 (000000001011000000000 (000000001011000000000
0b)
0.04 0b)
0.04 0b)
0.04
Not UE DRX capable (1) Not UE DRX capable (1) Not UE DRX capable (1)
30 30 30
1 (2 for RB083 cells) 1 (2 for RB083 cells) 1 (2 for RB083 cells)
-12 dBm -12 dBm -12 dBm

-95 dBm -95 dBm -95 dBm
1 1 1
Not applicable Not applicable See embedded comments
DRRC enabled (1) DRRC enabled (1) DRRC enabled (1)
2 sec 2 sec 2 sec
3 3 3
0 sec 0 sec 0 sec
20 20 20
21 21 21
20 20 20
255 255 255
255 dB 255 dB 255 dB
1 dB 1 dB 1 dB
127 127 127
127 127 127
2 2 2
30 30 30
100 ms 100 ms 100 ms
0 0 0
70% 70% 70%
70% 70% 70%
30 s 30 s 30 s
30 s 30 s 30 s
30 s 30 s 30 s
30 s 30 s 30 s
10 10 10
50% 50% 50%
2s 2s 2s
2s 2s 2s
2s 2s 2s
2s 2s 2s
10 10 10
0 0 0
0 0 0
-1.5 dB -1.5 dB -1.5 dB
-0.7 dB -0.7 dB -0.7 dB
80% 80% 80%
5s 5s 5s
5s 5s 5s
5s 5s 5s
5s 5s 5s
0s 0s 0s
0s 0s 0s
0s 0s 0s
0s 0s 0s
0 dB 0 dB 0 dB
0 dB 0 dB 0 dB
Measurement for periodic Measurement for periodic Measurement for periodic
trigger (0) trigger (0) trigger (0)
16 16 16
6 6 6
10 10 10
5 5 5
0 0 0
15 15 15
7 7 7
5 5 5
0 0 0
4 4 4
2 2 2
2 2 2
2 2 2
2 2 2
4 4 4
4 4 4
4 4 4
2 2 2
0 0 0
0 0 0
2 2 2
2 2 2
4 4 4
4 4 4
2 2 2
1 1 1
7 7 7
4 4 4
41 41 41
12 12 12
23 23 23
33 33 33
1 1 1
1 1 1
0s 0s 0s
0s 0s 0s
See comments See comments See comments
-104 dBm -104 dBm -104 dBm
redirection allowed just to FDD
redirection
neighborsallowed
(1) just to FDD
redirection
neighborsallowed
(1) just to FDD neighbors (1)
0 0 0
0 0 0
0 0 0
0.1 dB 0.1 dB 0.1 dB

2 (2) 2 (2) 2 (2)
-101.9 dBm -101.9 dBm -101.9 dBm
1 1 1
1 dB 1 dB 1 dB
7 dB 8 dB 8 dB
65535 dB 65535 dB 65535 dB
2 (2) 2 (2) 2 (2)
42 for Ultra0.8
and dBFlexi sites ( 42 for Ultra0.8
and dBFlexi sites (
20 W PA) , and 38dBm for 20 W PA) , and 38dBm for 20 W PA) , and 38dBm for
Metro 11site(10)
(8 W PA) Metro 11site(10)
(8 W PA)
Override allowed (1) Override allowed (1) Override allowed (1)

0 0 0
EVAM non capable (1) EVAM non capable (1) EVAM non capable (1)
0 0 0
0 0 0
1 1 1

-25 dB -25 dB -25 dB
-8 dB -8 dB -8 dB
-3 dB -3 dB -3 dB
2 dB 2 dB 2 dB
3 dB 3 dB 3 dB
4 dB 4 dB 4 dB
3 dB 3 dB 3 dB
-7 dB -7 dB -7 dB
7 dB 7 dB 7 dB
-2 dB -2 dB -2 dB
-11 dB -11 dB -11 dB
-5 dB -5 dB -5 dB
0 dB 0 dB 0 dB
0 dB 0 dB 0 dB
-11 dB -11 dB -11 dB
0 dB 0 dB 0 dB
-2 dB -2 dB -2 dB
33 dBm for 20W PA, 29 dBm 33
for dBm
8W PA
for 20W PA, 29 dBm 33
for dBm
8W PA
for 20W PA, 29 dBm for 8W PA
-3 dB -3 dB -3 dB
2 dB 2 dB 2 dB
-3 dB -3 dB -3 dB
-2 dB -2 dB -2 dB
-2 dB -2 dB -2 dB
-3 dB -3 dB -3 dB
10 10 10
65535 - Not Defined 65535 - Not Defined 65535 - Not Defined

0 0 0
Enabled 300 ms
(1) EXCEPT for Enabled 300 ms
(1) EXCEPT for
VCC (0)
Disabled VCC (0)
Disabled VCC (0)
Disabled
DC-HSDPA and MIMO DC-HSDPA and MIMO DC-HSDPA and MIMO
disabled (0) disabled (0) disabled (0)
5 dB 5 dB 5 dB
5 dB 5 dB 5 dB
3 dB 3 dB 3 dB
1.6 dB 1.6 dB 1.6 dB
16 frames (2) 16 frames (2) 16 frames (2)
2s 2s 2s
4 4 4
29 29 29
0.05 0.05 0.05
0.75 0.75 0.75
0.2 sec 0.2 sec 0.2 sec
128000 bps 128000 bps 128000 bps
0 ms (0) 0 ms (0) 0 ms (0)
0 ms (0) 0 ms (0) 0 ms (0)
512 bytes (512) 512 bytes (512) 512 bytes (512)
QoS prioritization is used QoS prioritization is used QoS prioritization is used
for HS NRT channels (1) for HS NRT channels (1) for HS NRT channels (1)
0 ms 0 ms 0 ms
0.2 s 0.2 s 0.2 s
96000 bps 96000 bps 96000 bps
0 ms (0) 0 ms (0) 0 ms (0)
3 3 3
240 kbps, SF16 (2) 240 kbps, SF16 (2) 240 kbps, SF16 (2)
6 dB 6 dB 6 dB
100 ms (100) 100 ms (100) 100 ms (100)
Disabled (0) Enabled (1) Disabled (0)
64 kbps (64) 64 kbps (64) 64 kbps (64)
64 kbps (64) 64 kbps (64) 64 kbps (64)
1111 1111 1111
72 72 72
Number of E-DCH users is Number of E-DCH users is Number of E-DCH users is
not restricted. (0) not restricted. (0) not restricted. (0)
0 0 0
0 0 0
0 0 0
0 0 0
3840 kbps,2*SF2 (2) 3840 kbps,2*SF2 (2) See embedded comments
10 10 10
0 0 0
30 s 30 s 30 s
40 40 40
10 10 10
30 30 30
MIMO with 64QAM disabled MIMO with 64QAM disabled
MIMO with 64QAM disabled (0)
(0) (0)
3 3 3
60 s 60 s 60 s
10 s 10 s 10 s
20 s 20 s 20 s
30 s 30 s 30 s
15 s 15 s 15 s
2dB 2dB 2dB
6 dB 6 dB 6 dB
7 dB 7 dB 7 dB
32767 dB 32767 dB 32767 dB
7 dB 7 dB 7 dB
0.5 dB 0.5 dB 0.5 dB
0.5 dB 0.5 dB 0.5 dB
0.5 dB 0.5 dB 0.5 dB
10 10 10
42 dBm (38 dbm for metro
40 dBm 42 dBm (38 dbm for metro sites)
sites)
42 dBm32767 dBm
for Ultra and Flexi 32767 dBm 32767 dBm
sites (20 Watt PA) and 38 42 dBm (38 dbm for metro sites)
sites)
dBm for Metros
1 dB (8 Watt PA) 1 dB 1 dB
1 dB 1 dB 1 dB
-1 dB -1 dB -1 dB
0.05 0.05 0.05
0.75 0.75 0.75
100 ms (0) 100 ms (0) 100 ms (0)
50% 0.5 0.5
-0.5 dB -0.5 dB -0.5 dB
30 users 30 users 30 users
0 dB 0 dB 0 dB

10 10 10
10 10 10
0 0 0
0 0 0
5 5 5
5 5 5
10 10 10
5 5 5
10 10 10
5 5 5
0 0 0
NO (0) NO (0) NO (0)
NoHSPA05ReConf (0) NoHSPA05ReConf (0) NoHSPA05ReConf (0)
4 4 4
0 0 0
0 0 0
15 15 15
4095 4095 4095
AAR Not Capable (1) AAR Not Capable (1) AAR Not Capable (1)
1 1 1
1 1 1
10 km 10 km 10 km
CPICH Ec/No (0) CPICH Ec/No (0) CPICH Ec/No (0)
Planning Parameter Planning Parameter Planning Parameter
0 0 0
Please see comments Please see comments Please see comments
-92 dBm -92 dBm -92 dBm
0 0 0
1 1 1
1 1 1
0 0 0
0 0 0
Multiple PLMN List not Multiple PLMN List not Multiple PLMN List not
broadcasted (0) broadcasted (0) broadcasted (0)
3 3 3
4 4 4
4 (2) 4 (2) 4 (2)
20 20 20
1 1 1
2 2 2
8 8 8
2 2 2
8 8 8
Not used (0) Not used (0) Not used (0)
255 255 255
18 18 18
8 8 8
0 0 0
-24 dB -24 dB -24 dB
0 dB 0 dB 0 dB
0 dB 0 dB 0 dB
0 dB 0 dB 0 dB
Default value 2 dB; fast Default value 2 dB; fast Default value 2 dB; fast
moving scenario
Default value 2 value 0 dB moving
dB; fast Defaultscenario
value 2 value 0 dB moving
value 2 value 0 dB
dB; fast
moving scenario value 0
Default value 2 dB; fastdB moving scenario value 0
Default value 2 dB; fast dB moving scenario value 0 dB
Default value 2 dB; fast
moving scenario value 0 dB moving scenario value 0 dB moving scenario value 0 dB
-18 dB -18 dB -18 dB
-115 dBm -115 dBm -115 dBm
4 4 4
50 50 50
0 0 0
RSCP (1) RSCP (1) RSCP (1)
EcNo (0) EcNo (0) EcNo (0)
0 0 0
600 ms (6) 600 ms (6) 600 ms (6)
1400 ms (7) 1400 ms (7) 1400 ms (7)
-1 dB -1 dB -1 dB
-1 dB -1 dB -1 dB
10 10 10
15 seconds 15 seconds 15 seconds
SIB4 not broadcasted (0) SIB4 not broadcasted (0) SIB4 not broadcasted (0)
1 1 1
2 dB 2 dB 2 dB
8 dB 8 dB 8 dB
16 dB 16 dB 16 dB
10 dB 10 dB 10 dB
2 dB 2 dB 2 dB
2 dB 2 dB 2 dB
1 1 1
0 dB 0 dB 0 dB
0 dB 0 dB 0 dB
2 dB 2 dB 2 dB
4 dB 4 dB 4 dB
-1 dB -1 dB -1 dB
-1 dB -1 dB -1 dB
1000 ms 1000 ms 1000 ms
6s 6s 6s
1s 1s 1s
3s 3s 3s
10 s 10 s 10 s
40 s 40 s 40 s
0s 0s 0s
0 dB 0 dB 0 dB
10 ms 10 ms 10 ms
25 ms 25 ms 25 ms
3s 3s 3s
2s 2s 2s
2s 2s 2s
10637 10637 10637
99 99 99
0 0 0
640 ms (6) 640 ms (6) 640 ms (6)
234 234 234
10 10 10
2 2 2
2 2 2

SIB Size is not available SIB Size is not available SIB Size is not available
SIB Size (9999)
is not available SIB Size (9999)
is not available
(9999) (9999) (9999)
(9999) (9999) (9999)
0 dB 0 dB 0 dB
20 km (3) 20 km (3) 20 km (3)

MACRO HSDPA 7.2 MACRO HSDPA 7.2
MACRO HSDPA 7.2 Light
Medium or Heavy with Medium or Heavy with
with HSUPA - F2
HSUPA - F1 HSUPA - F2

90% 90% 90%
-1 dB -1 dB -1 dB
0 dB 0 dB 0 dB
2 dB 2 dB 2 dB
-2 dB -2 dB -2 dB
70% 70% 70%
-2 dB -2 dB -2 dB
-1 dB -1 dB -1 dB
0 dB 0 dB 0 dB
50% 50% 50%
-10 dB -10 dB -10 dB
-10 dB -10 dB -10 dB
-10 dB -10 dB -10 dB
off (0) off (0) off (0)
5 dB 5 dB 5 dB
3 dB 3 dB 3 dB
-22 dB -22 dB -22 dB
1 1 1
0s 0s 0s
3600 s 3600 s 3600 s
0.25 0.25 0.25
-9 dB -9 dB -9 dB
-92 dBm -92 dBm -92 dBm
-2 dB -2 dB -2 dB
0 0 0
1 1 1
10 10 10
0 dB -1 dB 0 dB
-3 dB -3 dB -3 dB
0 dB -1 dB 0 dB
-5 dB -5 dB -5 dB
5 5 5
0 0 0
8 8 8
43200 43200 43200
2160 2160 2160

Immediate
VCCF-DPCH Immediate
VCCF-DPCH Immediate
VCCF-DPCH
200 ms (5) 200 ms (5) 200 ms (5)
See embedded comments See embedded comments See embedded comments
458124 (0001101111110110001100b)
458124 (0001101111110110001100b)
458124 (0001101111110110001100b)
458124 458124 458124
54560 (15,14,12,10, 8, 5 codes
54560
enabled)
(15,14,12,10, 8, 5 codes
54560
enabled)
(15,14,12,10, 8, 5 codes enabled)
8 8 8
8 (2) 8 (2) 8 (2)
8 (0) 8 (0) 8 (0)
12 (1) 12 (1) 12 (1)
0 0 0
5 5 5
2 2 2
25 25 25
3 3 3
1 1 1
2 dB 2 dB 2 dB
0 0 0
2 dB 2 dB 2 dB
0 dB 0 dB 0 dB
8 dB 8 dB 8 dB

Ultra
sites
40 dBm (20forWatt
CECPA) and 39
in CEC, sites
CECPA) and 39
in CEC, sites
CECPA) and 39
in CEC, 40
10 dB 10 dB 10 dB
43 dBm (20W) 43 dBm (20W) 43 dBm (20W)
5 dB 5 dB 5 dB
0 dB 0 dB 0 dB
0 dB 0 dB 0 dB
1 dB 1 dB 1 dB
0.8 dB 0.8 dB 0.8 dB
40.5 dBm 37
for dBm
for dBm
for dBm
Ultra and Flexi
dBm for32767
MetrodBm
MetrodBm
MetrodBm
(8 Watt PA)
32767 dBm 32767 dBm 32767 dBm

0 dB 0 dB 0 dB
4194303 4194303 4194303
11264
(1111111111111111111111b) 11264
(1111111111111111111111b) 11264
(1111111111111111111111b)
(000000001011000000000 (000000001011000000000 (000000001011000000000
0b)
0.04 0b)
0.04 0b)
0.04
30 30 30
-12 dBm -12 dBm -12 dBm

-95 dBm -95 dBm -95 dBm
1 1 1
2 sec 2 sec 2 sec
3 3 3
0 sec 0 sec 0 sec
21 20 21
21 21 21
21 20 21
255 255 255
255 dB 255 dB 255 dB
1 dB 1 dB 1 dB
127 127 127
127 127 127
2 2 2
31 30 31
100 ms 100 ms 100 ms
0 0 0
70% 70% 70%
70% 70% 70%
30 s 30 s 30 s
30 s 30 s 30 s
30 s 30 s 30 s
30 s 30 s 30 s
10 10 10
50% 50% 50%
2s 2s 2s
2s 2s 2s
2s 2s 2s
2s 2s 2s
10 10 10
0 0 0
0 0 0
-1.5 dB -1.5 dB -1.5 dB
-0.7 dB -0.7 dB -0.7 dB
80% 80% 80%
5s 5s 5s
5s 5s 5s
5s 5s 5s
5s 5s 5s
0s 0s 0s
0s 0s 0s
0s 0s 0s
0s 0s 0s
0 dB 0 dB 0 dB
0 dB 0 dB 0 dB
16 16 16
6 6 6
10 10 10
5 5 5
0 0 0
18 15 18
7 7 7
8 5 8
0 0 0
4 4 4
2 2 2
2 2 2
2 2 2
2 2 2
4 4 4
4 4 4
4 4 4
2 2 2
0 0 0
0 0 0
2 2 2
2 2 2
4 4 4
4 4 4
2 2 2
7 1 7
7 7 7
7 4 7
42 41 42
12 12 12
24 23 24
36 33 36
1 1 1
1 1 1
0s 0s 0s
0s 0s 0s
-104 dBm -104 dBm -104 dBm
redirection allowed just to FDD
redirection
neighborsallowed
(1) just to FDD
redirection
neighborsallowed
(1) just to FDD neighbors (1)
0 0 0
0 0 0
0 0 0
0.1 dB 0.1 dB 0.1 dB

2 (2) 2 (2) 2 (2)
-101.9 dBm -101.9 dBm -101.9 dBm
1 1 1
1 dB 1 dB 1 dB
8 dB 8 dB 8 dB
65535 dB 65535 dB 65535 dB
2 (2) 2 (2) 2 (2)
42 for Ultra0.8
and dBFlexi sites (
Metro 11site(10)
(8 W PA)

0 0 0
0 0 0
0 0 0
1 1 1

-25 dB -25 dB -25 dB
-8 dB -8 dB -8 dB
-3 dB -3 dB -3 dB
2 dB 2 dB 2 dB
3 dB 3 dB 3 dB
4 dB 4 dB 4 dB
3 dB 3 dB 3 dB
-7 dB -7 dB -7 dB
7 dB 7 dB 7 dB
-2 dB -2 dB -2 dB
-11 dB -11 dB -11 dB
-5 dB -5 dB -5 dB
0 dB 0 dB 0 dB
0 dB 0 dB 0 dB
-11 dB -11 dB -11 dB
0 dB 0 dB 0 dB
-2 dB -2 dB -2 dB
for dBm
8W PA
for dBm
8W PA
-3 dB -3 dB -3 dB
2 dB 2 dB 2 dB
-3 dB -3 dB -3 dB
-2 dB -2 dB -2 dB
-2 dB -2 dB -2 dB
-3 dB -3 dB -3 dB
10 10 10

0 0 0
Enabled 300 ms
(1) EXCEPT for
VCC (0)
Disabled VCC (0)
Disabled VCC (0)
Disabled
5 dB 5 dB 5 dB
5 dB 5 dB 5 dB
3 dB 3 dB 3 dB
1.6 dB 1.6 dB 1.6 dB
2s 2s 2s
4 4 4
29 29 29
0.05 0.05 0.05
0.75 0.75 0.75
0.2 sec 0.2 sec 0.2 sec
128000 bps 128000 bps 128000 bps
0 ms (0) 0 ms (0) 0 ms (0)
0 ms (0) 0 ms (0) 0 ms (0)
0 ms 0 ms 0 ms
0.2 s 0.2 s 0.2 s
96000 bps 96000 bps 96000 bps
0 ms (0) 0 ms (0) 0 ms (0)
3 3 3
6 dB 6 dB 6 dB
100 ms (100) 100 ms (100) 100 ms (100)
1 (Enabled) 1 (Enabled) 1 (Enabled)
64 kbps (64) 64 kbps (64) 64 kbps (64)
64 kbps (64) 64 kbps (64) 64 kbps (64)
1111 1111 1111
72 72 72
0 0 0
0 0 0
0 0 0
0 0 0
10 10 10
0 0 0
30 s 30 s 30 s
40 40 40
10 10 10
30 30 30
3 3 3
60 s 60 s 60 s
10 s 10 s 10 s
20 s 20 s 20 s
30 s 30 s 30 s
15 s 15 s 15 s
2dB 2dB 2dB
6 dB 6 dB 6 dB
7 dB 7 dB 7 dB
32767 dB 32767 dB 32767 dB
7 dB 7 dB 7 dB
0.5 dB 0.5 dB 0.5 dB
0.5 dB 0.5 dB 0.5 dB
0.5 dB 0.5 dB 0.5 dB
10 10 10
42 dBm (38 dbm for metro sites)
sites)
32767 dBm 32767 dBm 32767 dBm
sites)
1 dB 1 dB 1 dB
1 dB 1 dB 1 dB
-1 dB -1 dB -1 dB
0.05 0.05 0.05
0.75 0.75 0.75
100 ms (0) 100 ms (0) 100 ms (0)
0.5 0.5 0.5
-0.5 dB -0.5 dB -0.5 dB
0 dB 0 dB 0 dB

10 10 10
10 10 10
0 0 0
0 0 0
5 5 5
5 5 5
10 10 10
5 5 5
10 10 10
5 5 5
0 0 0
NO (0) NO (0) NO (0)
4 4 4
0 0 0
0 0 0
15 15 15
4095 4095 4095
1 1 1
1 1 1
10 km 10 km 10 km
0 0 0
-92 dBm -92 dBm -92 dBm
0 0 0
1 1 1
1 1 1
0 0 0
0 0 0
3 3 3
4 4 4
4 (2) 4 (2) 4 (2)
20 20 20
1 1 1
2 2 2
8 8 8
2 2 2
8 8 8
255 255 255
18 18 18
8 8 8
0 0 0
-24 dB -24 dB -24 dB
0 dB 0 dB 0 dB
0 dB 0 dB 0 dB
0 dB 0 dB 0 dB
Default value 2 dB; fast Default value 2 dB; fast Default value 2 dB; fast
moving scenario
Default value 2 value 0 dB moving
value 2 value 0 dB moving
value 2 value 0 dB
dB; fast
moving scenario value 0
Default value 2 dB; fastdB moving scenario value 0
Default value 2 dB; fast dB moving scenario value 0 dB
moving scenario value 0 dB moving scenario value 0 dB moving scenario value 0 dB
-18 dB -18 dB -18 dB
-115 dBm -115 dBm -115 dBm
4 4 4
50 50 50
0 0 0
0 0 0
600 ms (6) 600 ms (6) 600 ms (6)
1400 ms (7) 1400 ms (7) 1400 ms (7)
-1 dB -1 dB -1 dB
-1 dB -1 dB -1 dB
10 10 10
1 1 1
2 dB 2 dB 2 dB
8 dB 8 dB 8 dB
16 dB 16 dB 16 dB
10 dB 10 dB 10 dB
2 dB 2 dB 2 dB
2 dB 2 dB 2 dB
1 1 1
0 dB 0 dB 0 dB
0 dB 0 dB 0 dB
2 dB 2 dB 2 dB
4 dB 4 dB 4 dB
-1 dB -1 dB -1 dB
-1 dB -1 dB -1 dB
1000 ms 1000 ms 1000 ms
6s 6s 6s
1s 1s 1s
3s 3s 3s
10 s 10 s 10 s
40 s 40 s 40 s
0s 0s 0s
0 dB 0 dB 0 dB
10 ms 10 ms 10 ms
25 ms 25 ms 25 ms
3s 3s 3s
2s 2s 2s
2s 2s 2s
10661 10637 10661
99 99 99
0 0 0
640 ms (6) 640 ms (6) 640 ms (6)
234 234 234
10 10 10
2 2 2
2 2 2

SIB Size (9999)
is not available
(9999) (9999) (9999)
(9999) (9999) (9999)
0 dB 0 dB 0 dB
20 km (3) 20 km (3) 20 km (3)

MACRO HSDPA 7.2 SINGLE Carrier MICRO TWO Carrier MICRO
Medium or Heavy with HSDPA 7.2 with HSUPA - HSDPA 7.2 with HSUPA -
HSUPA - F3 F1 F1

90% 90% 90%
-1 dB -1 dB -1 dB
0 dB 0 dB 0 dB
2 dB 2 dB 2 dB
-2 dB -2 dB -2 dB
70% 70% 70%
-2 dB -2 dB -2 dB
-1 dB -1 dB -1 dB
0 dB 0 dB 0 dB
50% 50% 50%
-10 dB -10 dB -10 dB
-10 dB -10 dB -10 dB
-10 dB -10 dB -10 dB
off (0) off (0) off (0)
5 dB 5 dB 5 dB
0 dB 0 dB 0 dB
-22 dB -22 dB -22 dB
1 1 1
0s 0s 0s
3600 s 3600 s 3600 s
0.25 0.25 0.25
-9 dB -9 dB -9 dB
-92 dBm -92 dBm -92 dBm
-2 dB -2 dB -2 dB
0 0 0
1 1 1
10 10 10
0 dB -1 dB -1 dB
-1 dB -3 dB -3 dB
1 dB -1 dB -1 dB
-3 dB -5 dB -5 dB
5 5 5
0 0 0
8 8 8
43200 43200 43200
2160 2160 2160

Immediate
VCCF-DPCH Immediate
VCCF-DPCH Immediate
VCCF-DPCH
200 ms (5) 200 ms (5) 200 ms (5)
See embedded comments Disabled (0) Disabled (0)
458124 (0001101111110110001100b)
458124 (0001101111110110001100b)
458124 (0001101111110110001100b)
458124 458124 458124
54560 (15,14,12,10, 8, 5 codes
54560
enabled)
(15,14,12,10, 8, 5 codes
54560
enabled)
(15,14,12,10, 8, 5 codes enabled)
8 8 8
8 (2) 8 (2) 8 (2)
8 (0) 8 (0) 8 (0)
12 (1) 12 (1) 12 (1)
0 0 0
5 5 5
See embedded comments Disabled (0) Disabled (0)
2 2 2
25 25 25
3 2 2
0 0 0
2 dB 2 dB 2 dB
0 0 0
2 dB 2 dB 2 dB
0 dB 0 dB 0 dB
8 dB 8 dB 8 dB

Ultra
sites
40 dBm (20forWatt
CECPA) and 39
in CEC, sites
CECPA) and 39
in CEC, sites
CECPA) and 39
in CEC, 40
10 dB 10 dB 10 dB
43 dBm (20W) 43 dBm (20W) 43 dBm (20W)
5 dB 5 dB 5 dB
0 dB 0 dB 0 dB
0 dB 0 dB 0 dB
1 dB 1 dB 1 dB
0.8 dB 0.8 dB 0.8 dB
40.5 dBm 37
for dBm
for dBm
for dBm
Ultra and Flexi
dBm for32767
MetrodBm
MetrodBm
MetrodBm
(8 Watt PA)
32767 dBm 32767 dBm 32767 dBm

0 dB 0 dB 0 dB
4194303 4194303 4194303
11264
(1111111111111111111111b) 11264
(1111111111111111111111b) 11264
(1111111111111111111111b)
(000000001011000000000 (000000001011000000000 (000000001011000000000
0b)
0.04 0b)
0.04 0b)
0.04
30 30 30
-12 dBm -12 dBm -12 dBm

-95 dBm -95 dBm -95 dBm
1 1 1
2 sec 2 sec 2 sec
3 3 3
0 sec 0 sec 0 sec
22 25 25
22 20 20
22 25 25
255 255 255
255 dB 255 dB 255 dB
1 dB 1 dB 1 dB
127 127 127
127 127 127
2 2 2
32 37 37
100 ms 100 ms 100 ms
0 0 0
70% 70% 70%
70% 70% 70%
30 s 30 s 30 s
30 s 30 s 30 s
30 s 30 s 30 s
30 s 30 s 30 s
10 10 10
50% 50% 50%
2s 2s 2s
2s 2s 2s
2s 2s 2s
2s 2s 2s
10 10 10
0 0 0
0 0 0
-1.5 dB -1.5 dB -1.5 dB
-0.7 dB -0.7 dB -0.7 dB
80% 80% 80%
5s 5s 5s
5s 5s 5s
5s 5s 5s
5s 5s 5s
0s 0s 0s
0s 0s 0s
0s 0s 0s
0s 0s 0s
0 dB 0 dB 0 dB
0 dB 0 dB 0 dB
16 16 16
6 6 6
10 10 10
5 5 5
0 0 0
8 12 12
8 3 3
12 10 10
0 0 0
4 4 4
2 2 2
2 2 2
2 2 2
2 2 2
4 4 4
4 4 4
4 4 4
2 2 2
0 0 0
0 0 0
2 2 2
2 2 2
4 4 4
4 4 4
2 2 2
8 2 2
8 3 3
11 9 9
43 44 44
13 14 14
29 27 27
47 44 44
1 1 1
1 1 1
0s 0s 0s
0s 0s 0s
See comments disabled (0) disabled (0)
-97 dBm 0 dBm 0 dBm
redirection allowed just to FDD neighbors
redirection(1)allowed to all neighbors
redirection
(0) allowed to all neighbors (0)
0 0 0
0 0 0
0 0 0
0.1 dB 0.1 dB 0.1 dB

2 (2) 2 (2) 2 (2)
-101.9 dBm -101.9 dBm -101.9 dBm
1 1 1
1 dB 1 dB 1 dB
8 dB 8 dB 8 dB
65535 dB 65535 dB 65535 dB
2 (2) 2 (2) 2 (2)
42 for Ultra0.8
and dBFlexi sites (
Metro 11site(10)
(8 W PA)

0 0 0
0 0 0
0 0 0
1 1 1

-25 dB -25 dB -25 dB
-8 dB -8 dB -8 dB
-3 dB -3 dB -3 dB
2 dB 2 dB 2 dB
3 dB 3 dB 3 dB
4 dB 4 dB 4 dB
3 dB 3 dB 3 dB
-7 dB -7 dB -7 dB
7 dB 7 dB 7 dB
-2 dB -2 dB -2 dB
-11 dB -11 dB -11 dB
-5 dB -5 dB -5 dB
0 dB 0 dB 0 dB
0 dB 0 dB 0 dB
-11 dB -11 dB -11 dB
0 dB 0 dB 0 dB
-2 dB -2 dB -2 dB
for dBm
8W PA
for dBm
8W PA
-3 dB -3 dB -3 dB
2 dB 2 dB 2 dB
-3 dB -3 dB -3 dB
-2 dB -2 dB -2 dB
-2 dB -2 dB -2 dB
-3 dB -3 dB -3 dB
10 10 10

0 0 0
Enabled 300 ms
(1) EXCEPT for
VCC (0)
Disabled VCC (0)
Disabled VCC (0)
Disabled
5 dB 5 dB 5 dB
5 dB 5 dB 5 dB
3 dB 3 dB 3 dB
1.6 dB 1.6 dB 1.6 dB
2s 2s 2s
4 4 4
29 29 29
0.05 0.05 0.05
0.75 0.75 0.75
0.2 sec 0.2 sec 0.2 sec
128000 bps 128000 bps 128000 bps
0 ms (0) 0 ms (0) 0 ms (0)
0 ms (0) 0 ms (0) 0 ms (0)
0 ms 0 ms 0 ms
0.2 s 0.2 s 0.2 s
96000 bps 96000 bps 96000 bps
0 ms (0) 0 ms (0) 0 ms (0)
3 3 3
6 dB 6 dB 6 dB
100 ms (100) 100 ms (100) 100 ms (100)
64 kbps (64) 64 kbps (64) 64 kbps (64)
64 kbps (64) 64 kbps (64) 64 kbps (64)
1111 1111 1111
72 72 72
0 0 0
0 0 0
0 0 0
0 0
See embedded comments 3840 kbps,2*SF2 (2) 3840 kbps,2*SF2 (2)
10 10 10
0 0 0
30 s 30 s 30 s
40 40 40
10 10 10
30 30 30
3 3 3
60 s 60 s 60 s
10 s 10 s 10 s
20 s 20 s 20 s
30 s 30 s 30 s
15 s 15 s 15 s
2dB 2dB 2dB
6 dB 6 dB 6 dB
7 dB 7 dB 7 dB
32767 dB 32767 dB 32767 dB
7 dB 7 dB 7 dB
0.5 dB 0.5 dB 0.5 dB
0.5 dB 0.5 dB 0.5 dB
0.5 dB 0.5 dB 0.5 dB
10 10 10
32767 dBm 32767 dBm 32767 dBm
1 dB 1 dB 1 dB
1 dB 1 dB 1 dB
-1 dB -1 dB -1 dB
0.05 0.05 0.05
0.75 0.75 0.75
100 ms (0) 100 ms (0) 100 ms (0)
0.5 0.5 0.5
-0.5 dB -0.5 dB -0.5 dB
0 dB 0 dB 0 dB

10 10 10
10 10 10
0 0 0
0 0 0
5 5 5
5 5 5
10 10 10
5 5 5
10 10 10
5 5 5
0 0 0
NO (0) NO (0) NO (0)
4 4 4
0 0 0
1 0 0
15 15 15
4095 4095 4095
1 1 1
1 1 1
20 km 10 km 10 km
0 0 0
-92 dBm -92 dBm -92 dBm
0 0 0
1 1 1
1 1 1
0 0 0
0 0 0
3 3 3
4 4 4
4 (2) 4 (2) 4 (2)
20 20 20
1 1 1
2 2 2
8 8 8
2 2 2
8 8 8
255 255 255
18 18 18
8 8 8
0 0 0
-24 dB -24 dB -24 dB
0 dB 0 dB 0 dB
0 dB 0 dB 0 dB
0 dB 0 dB 0 dB
Default value 2 dB Default value 2 dB
moving scenario
Default value 2 value 0 dB
dB; fast
moving scenario
Default value 2 value 0 dB
dB; fast
moving scenario value 0 dB
-18 dB -18 dB -18 dB
-115 dBm -115 dBm -115 dBm
4 4 4
50 50 50
0 0 0
0 0 0
600 ms (6) 600 ms (6) 600 ms (6)
1400 ms (7) 1400 ms (7) 1400 ms (7)
-1 dB -1 dB -1 dB
-1 dB -1 dB -1 dB
10 10 10
1 1 1
14 dB 2 dB 2 dB
8 dB 8 dB 8 dB
16 dB 16 dB 16 dB
10 dB 10 dB 10 dB
2 dB 2 dB 2 dB
2 dB 2 dB 2 dB
1 1 1
0 dB 0 dB 0 dB
0 dB 0 dB 0 dB
2 dB 2 dB 2 dB
4 dB 4 dB 4 dB
-1 dB -1 dB -1 dB
-1 dB -1 dB -1 dB
1000 ms 1000 ms 1000 ms
6s 6s 6s
1s 1s 1s
3s 3s 3s
10 s 10 s 10 s
40 s 40 s 40 s
0s 0s 0s
0 dB 0 dB 0 dB
10 ms 10 ms 10 ms
25 ms 25 ms 25 ms
3s 3s 3s
2s 2s 2s
2s 2s 2s
2963 10637 10637
99 99 99
0 0 0
640 ms (6) 640 ms (6) 640 ms (6)
234 234 234
10 10 10
2 2 2
2 2 2

SIB Size (9999)
is not available
(9999) (9999) (9999)
(9999) (9999) (9999)
0 dB 0 dB 0 dB
20 km (3) 20 km (3) 20 km (3)

TWO Carrier MICRO SINGLE Carrier FLEXI LITE TWO Carrier FLEXI LITE
HSDPA 7.2 with HSUPA - 10W WCEL 5W WCEL
F2 F1 F1

90% 90% 90%
-1 dB -1 dB -1 dB
0 dB 0 dB 0 dB
2 dB 2 dB 2 dB
-2 dB -2 dB -2 dB
70% 70% 70%
-2 dB -2 dB -2 dB
-1 dB -1 dB -1 dB
0 dB 0 dB 0 dB
50% 50% 50%
-10 dB -10 dB -10 dB
-10 dB -10 dB -10 dB
-10 dB -10 dB -10 dB
off (0) off (0) off (0)
5 dB 5 dB 5 dB
0 dB 0 dB 0 dB
-22 dB -22 dB -22 dB
1 1 1
0s 0s 0s
3600 s 3600 s 3600 s
0.25 0.25 0.25
-9 dB -9 dB -9 dB
-92 dBm -92 dBm -92 dBm
-2 dB -2 dB -2 dB
0 0 0
1 1 1
10 10 10
0 dB -1 dB -1 dB
-3 dB -3 dB -3 dB
0 dB -1 dB -1 dB
-5 dB -5 dB -5 dB
5 5 5
0 0 0
8 8 8
43200 43200 43200
2160 2160 2160
Enabled (1)6EXCEPT for 6 Enabled (1)6EXCEPT for

Enabled (1) EXCEPT for
ATM sites wthout HSPA ATM sites wthout HSPA
Immediate ATM Immediate
sites wthout HSPA VCC
VCCF-DPCH F-DPCH Immediate
VCCF-DPCH
200 ms (5) 200 ms (5) 200 ms (5)
458124 (0001101111110110001100b)
458124 (0001101111110110001100b)
458124 (0001101111110110001100b)
458124 458124 458124
54560 (15,14,12,10, 8, 5 codes
54560
enabled)
(15,14,12,10, 8, 5 codes
54560
enabled)
(15,14,12,10, 8, 5 codes enabled)
8 8 8
8 (2) 8 (2) 8 (2)
8 (0) 8 (0) 8 (0)
12 (1) 12 (1) 12 (1)
0 0 0
5 5 5
2 2 2
25 25 25
2 2 2
0 0 0
2 dB 2 dB 2 dB
0 0 0
2 dB 2 dB 2 dB
0 dB 0 dB 0 dB
8 dB 8 dB 8 dB
43 dBm for 0.8 dB and Flexi

Ultra 0.8 dB 0.8 dB
sites
40 dBm (20forWatt
CECPA) and 39
in CEC, 40 40 dBm 37 dBm
dBm for ROC in ROC, 40 PA) 37 dBm 34 dBm
dBm for CEC
4 dB in ROC 4 dB 4 dB
10 dB 10 dB 10 dB
43 dBm (20W) 40 dBm 37 dBm
5 dB 5 dB 5 dB
0 dB 0 dB 0 dB
0 dB 0 dB 0 dB
1 dB 1 dB 1 dB
0.8 dB 0.8 dB 0.8 dB
40.5 dBm 37
for dBm
Ultra and Flexi 34 dBm 31 dBm
sites (20 Watt PA) and 36.5 37.5 dBm 34.5 dBm
dBm for32767
MetrodBm
(8 Watt PA) 32767 dBm 32767 dBm
32767 dBm 32767 dBm 32767 dBm
0 dB 0 dB 0 dB
4194303 4194303 4194303
11264
(1111111111111111111111b) 11264
(1111111111111111111111b) 11264
(1111111111111111111111b)
(000000001011000000000 (0000000010110000000000 (000000001011000000000
0b)
0.04 b)
0.04 0b)
0.04
30 30 30
-12 dBm -12 dBm -12 dBm

-95 dBm -95 dBm -95 dBm
1 1 1
See embedded comments Not applicable See embedded comments
2 sec 2 sec 2 sec
3 3 3
0 sec 0 sec 0 sec
26 25 25
26 20 20
26 25 25
255 255 255
255 dB 255 dB 255 dB
1 dB 1 dB 1 dB
127 127 127
127 127 127
2 2 2
46 37 37
100 ms 100 ms 100 ms
0 0 0
70% 70% 70%
70% 70% 70%
30 s 30 s 30 s
30 s 30 s 30 s
30 s 30 s 30 s
30 s 30 s 30 s
10 10 10
50% 50% 50%
2s 2s 2s
2s 2s 2s
2s 2s 2s
2s 2s 2s
10 10 10
0 0 0
0 0 0
-1.5 dB -1.5 dB -1.5 dB
-0.7 dB -0.7 dB -0.7 dB
80% 80% 80%
5s 5s 5s
5s 5s 5s
5s 5s 5s
5s 5s 5s
0s 0s 0s
0s 0s 0s
0s 0s 0s
0s 0s 0s
0 dB 0 dB 0 dB
0 dB 0 dB 0 dB
16 16 16
6 6 6
10 10 10
5 5 5
0 0 0
16 12 12
9 3 3
15 10 10
0 0 0
4 4 4
2 2 2
2 2 2
2 2 2
2 2 2
4 4 4
4 4 4
4 4 4
2 2 2
0 0 0
0 0 0
2 2 2
2 2 2
4 4 4
4 4 4
2 2 2
9 2 2
9 3 3
14 9 9
45 44 44
15 14 14
28 27 27
45 44 44
1 1 1
1 1 1
0s 0s 0s
0s 0s 0s
0 dBm 0 dBm 0 dBm
redirection allowed to all neighbors
redirection
(0) allowed to all neighbors
redirection
(0) allowed to all neighbors (0)
0 0 0
0 0 0
0 0 0
0.1 dB 0.1 dB 0.1 dB

2 (2) 2 (2) 2 (2)
-101.9 dBm -101.9 dBm -101.9 dBm
1 1 1
1 dB 1 dB 1 dB
8 dB 8 dB 8 dB
65535 dB 65535 dB 65535 dB
2 (2) 2 (2) 2 (2)
42 for Ultra0.8
and dBFlexi sites ( 0.8 dB 0.8 dB
20 W PA) , and 38dBm for 39 dBm 36 dBm
Metro 11site(10)
(8 W PA) 11 (10) 11 (10)

0 0 0
0 0 0
0 0 0
1 1 1

-25 dB -25 dB -25 dB
-8 dB -8 dB -8 dB
-3 dB -3 dB -3 dB
2 dB 2 dB 2 dB
3 dB 3 dB 3 dB
4 dB 4 dB 4 dB
3 dB 3 dB 3 dB
-7 dB -7 dB -7 dB
7 dB 7 dB 7 dB
-2 dB -2 dB -2 dB
-11 dB -11 dB -11 dB
-5 dB -5 dB -5 dB
0 dB 0 dB 0 dB
0 dB 0 dB 0 dB
-11 dB -11 dB -11 dB
0 dB 0 dB 0 dB
-2 dB -2 dB -2 dB
33 dBm for 20W PA, 29 dBm for 8W PA 30 dBm 27 dBm
-3 dB -3 dB -3 dB
2 dB 2 dB 2 dB
-3 dB -3 dB -3 dB
-2 dB -2 dB -2 dB
-2 dB -2 dB -2 dB
-3 dB -3 dB -3 dB
10 10 10

0 0 0
Enabled 300 ms
(1) EXCEPT for 300 ms Enabled 300 ms
(1) EXCEPT for
Enabled (1) EXCEPT for
ATM sites wthout HSPA ATM sites wthout HSPA
ATM sites wthout HSPA VCC
VCC (0)
Disabled Disabled (0) VCC (0)
Disabled
See embedded comments Not applicable See embedded comments
5 dB 5 dB 5 dB
5 dB 5 dB 5 dB
3 dB 3 dB 3 dB
1.6 dB 1.6 dB 1.6 dB
2s 2s 2s
4 4 4
29 29 29
0.05 0.05 0.05
0.75 0.75 0.75
0.2 sec 0.2 sec 0.2 sec
128000 bps 128000 bps 128000 bps
0 ms (0) 0 ms (0) 0 ms (0)
0 ms (0) 0 ms (0) 0 ms (0)
QoS prioritization is used QoS prioritization is used for QoS prioritization is used
for HS NRT channels (1) HS NRT channels (1) for HS NRT channels (1)
0 ms 0 ms 0 ms
0.2 s 0.2 s 0.2 s
96000 bps 96000 bps 96000 bps
0 ms (0) 0 ms (0) 0 ms (0)
3 3 3
6 dB 6 dB 6 dB
100 ms (100) 100 ms (100) 100 ms (100)
64 kbps (64) 64 kbps (64) 64 kbps (64)
64 kbps (64) 64 kbps (64) 64 kbps (64)
1111 1111 1111
72 72 72
0 0 0
0 0 0
0 0 0
0 0 0
3840 kbps,2*SF2 (2) 3840 kbps,2*SF2 (2) 3840 kbps,2*SF2 (2)
10 10 10
0 0 0
30 s 30 s 30 s
40 40 40
10 10 10
30 30 30
3 3 3
60 s 60 s 60 s
10 s 10 s 10 s
20 s 20 s 20 s
30 s 30 s 30 s
15 s 15 s 15 s
2dB 2dB 2dB
6 dB 6 dB 6 dB
7 dB 7 dB 7 dB
32767 dB 32767 dB 32767 dB
7 dB 7 dB 7 dB
0.5 dB 0.5 dB 0.5 dB
0.5 dB 0.5 dB 0.5 dB
0.5 dB 0.5 dB 0.5 dB
10 10 10
42 dBm (38 dbm for metro sites) 39 dBm 36 dBm
32767 dBm 32767 dBm 32767 dBm
42 dBm (38 dbm for metro sites) 39 dBm 36 dBm
1 dB 1 dB 1 dB
1 dB 1 dB 1 dB
-1 dB -1 dB -1 dB
0.05 0.05 0.05
0.75 0.75 0.75
100 ms (0) 100 ms (0) 100 ms (0)
0.5 0.5 0.5
-0.5 dB -0.5 dB -0.5 dB
0 dB 0 dB 0 dB

10 10 10
10 10 10
0 0 0
0 0 0
5 5 5
5 5 5
10 10 10
5 5 5
10 10 10
5 5 5
0 0 0
NO (0) NO (0) NO (0)
4 4 4
0 0 0
0 0 0
15 15 15
4095 4095 4095
1 1 1
1 1 1
10 km 10 km 10 km
0 0 0
-92 dBm -92 dBm -92 dBm
0 0 0
1 1 1
1 1 1
0 0 0
0 0 0
3 3 3
4 4 4
4 (2) 4 (2) 4 (2)
20 20 20
1 1 1
2 2 2
8 8 8
2 2 2
8 8 8
255 255 255
18 18 18
8 8 8
0 0 0
-24 dB -24 dB -24 dB
0 dB 0 dB 0 dB
0 dB 0 dB 0 dB
0 dB 0 dB 0 dB
Default value 2 dB Default value 2 dB Default value 2 dB
-18 dB -18 dB -18 dB
-115 dBm -115 dBm -115 dBm
4 4 4
50 50 50
0 0 0
0 0 0
600 ms (6) 600 ms (6) 600 ms (6)
1400 ms (7) 1400 ms (7) 1400 ms (7)
-1 dB -1 dB -1 dB
-1 dB -1 dB -1 dB
10 10 10
1 1 1
2 dB 2 dB 2 dB
8 dB 8 dB 8 dB
16 dB 16 dB 16 dB
10 dB 10 dB 10 dB
2 dB 2 dB 2 dB
2 dB 2 dB 2 dB
1 1 1
0 dB 0 dB 0 dB
0 dB 0 dB 0 dB
2 dB 2 dB 2 dB
4 dB 4 dB 4 dB
-1 dB -1 dB -1 dB
-1 dB -1 dB -1 dB
1000 ms 1000 ms 1000 ms
6s 6s 6s
1s 1s 1s
3s 3s 3s
10 s 10 s 10 s
40 s 40 s 40 s
0s 0s 0s
0 dB 0 dB 0 dB
10 ms 10 ms 10 ms
25 ms 25 ms 25 ms
3s 3s 3s
2s 2s 2s
2s 2s 2s
10661 10637 10637
99 99 99
0 0 0
640 ms (6) 640 ms (6) 640 ms (6)
234 234 234
10 10 10
2 2 2
2 2 2

SIB Size (9999)
is not available
(9999) (9999) (9999)
(9999) (9999) (9999)
0 dB 0 dB 0 dB
20 km (3) 20 km (3) 20 km (3)

TWO Carrier FLEXI LITE
O2 UK Range for
5W WCEL Comments Parameter Type? IPD PTY ID
Optimisation
F2
UMTS2100
1 (Disabled)
Optimised for low bit rates (0)
90% 12473
900 kbit/s 12474
-1 dB 12475
Changed after the
0 dB IPD vs UTRAN 12476
2 dB workbook 12477
-2 dB comparison 12478
exercise
70% 12479
800 kbit/s 12508
-2 dB 12509
-1 dB 12510
0 dB 12511
50% 12512
200 kbit/s 12513
-10 dB 12514
-10 dB 12515
-10 dB 12516
off (0)
Restrict PS domain (1)
5 dB
5 number
0 dB RAN1797 11295
Enabled (1) Common Channel
RAN1201 F-
Setup
-22 dB
DPCH
1 11411
0s
3600 s 11336
0.25 RAN1797 11416
-9 dB Common Channel
Changed
Setup to -2 dB
-92 dBm following trial.
-2 dB Please refer to 10276
0 UKRE/12/066 for 11424
further details
1 11302
10 Amended Sept 2009 following Optimisa 38292
0 dB Amended Sept 2009 following Optimisa 11222
-3 dB Amended Sept 2009 following Optimisa 11403
0 dB Amended Sept 2009 following Optimisa
Validated/amende 11428
-5 dB d FebruarySept
Amended 20092009 following Optimisa 11216
as part of HSPA
5 11396
and Second
0 Carrier
8 development.
43200
2160
RAN1201 F-
Enabled (1)6EXCEPT for DPCH
RAN1201
RAN1643 F- HSDPA
ATM sites wthout HSPA
Immediate DPCH
64QAM This
VCCF-DPCH RAN1201 F-
allocation (0) parameter
DPCH needs
200 ms (5) to be set to
Enabled(1) for
Disabled (0)
HSPA+ rollout.
Enabled (1) Otherwise this 12534
Enabled (1) parameter
Amended Septneeds
2009 following Optimisa 10604
to be set to
Not defined (255) Disabled(0)
Disabled (0)
Disabled (0)
458124 (0001101111110110001100b)
458124
Disabled (0)
Enabled (1) RAN1686 HSPA 72 Users Per Cell
Validated/amende
54560 (15,14,12,10, 8, 5 codes enabled) d FebruarySept
as part of HSPA
8 38185
and Second
Not defined (255) Carrier
TRUE (1) development.
8 (2)
8 (0)
12 (1)
0 RAN1470 HSUPA
2ms TTI - This
5 parameter needs
Disabled (0) to be set to
Enabled(1) for
Disabled (0)
HSPA+ rollout.
2 Otherwise this
384 kbit/s parameter
Lockable Values 64 kbit/s , 128 kbit/s,
Lockable needsdefined for Optimisatio
384 kbit/s
Range 11379
to be set to
384 kbit/s
Lockable Values 64 kbit/s , 128 kbit/s,
Lockable
384 kbit/s
Range defined for Optimisati
Disabled(0). 1876
25 11409
Cell specific
configuration
2 Amended
parameter.Sept
This2009 following Optimisa 38277
0 parameter 11184
Disabled (0) doesn't have any
impact in RAN
1 (Disabled) 1.5.2ED2
Validated/amende
2 dB d February 2009
as part of HSPA
Increased to 2 dB
0 10212
and
Nov2010Second
following
2 dB Carrier 38149
trial
Set by0db
to Johnon
0 dB development.
Button 38203
advice from Nokia
8 dB Applicable to
0.8 dB Increased
RAS05.1 CD2 to 11397
40dBm
onwards for all
37 dBm configs following 1898
34 dBm RAB Offset Trial in 10277
4 dB Bit 0: Originating RAN1201
October 2006.F-
conversational DPCH
See
RAN1201 F-
10 dB call, Bit 1: UKRE_06_055
DPCH
37 dBm Originating Amended Sept 2009 following Optimisa 11395
streaming call, Bit RAN1470 HSUPA
5 dB Power offset for
2: Originating 2ms TTI
0 dB interactive call, Bit E-HICH, E-RGCH,
3: Originating RAN1201 F-
E-AGCH
0 dB Changed Nov
background call, DPCH
1 dB Bit 4: Originating 2007 to support
Applicable to 11210
0.8 dB subscribed traffic RAS05.1Rollout
HSDPA CD2 11311
call, Bit 5: onwards
31 dBm Terminating Aligned with 11314
34.5 dBm conversational previous RAS05.1 11266
call, Bit 6: values
32767 dBm
Terminating
32767 dBm streaming call, Bit
CS AMR 12.2 kbps (0) 7: Terminating 12608
interactive call, Bit
2 antennas (1) 8: Terminating Must be 11300
1-2 as appropriate background call, consistent with 10288
Bit 9: Emergency Tcell parameter
0 dB call, Bit 10: Inter- 38057
4194303 New
RAN1797parameter
11264 RAT cell re-
(1111111111111111111111b) for
Commonbit
SRB rate
Channel on Flexi Rel2 sites
(000000001011000000000 selection, Bit 11:
Inter-RAT cell Setup disabled
RAN1201 F- for ONLY
0b)
0.04 change order, Bit registration
DPCH
Not UE DRX capable (1) 12: Registration,
Bit 13: Detach, Bit
24 dBm 14: Originating Changed to 24 11341
high priority dBm.
Changed Please
to 24 refer
24 dBm 11231
to trial report
signalling, Bit 15: dBm. Please refer
24 dBm UKRE/12/066 12195
Originating low to trial report
30 priority signalling, UKRE/12/066
Enabled (1) Bit 16: Call re-
establishment, Bit
1 (2 for RB083 cells) 17: Terminating
high priority
signalling, Bit 18:
-12 dBm Terminating low
priority signalling,
Bit 19:
Terminating cause
unknown, Bit 20:
MBMS reception,
Bit 21: MBMS ptp
RB request
-95 dBm
1 Changed to a value of 1 for the UMTS 9 38291
Disabled (0)
See embedded comments
DRRC enabled (1) Change made as per change Request 11340
Enabled (1) Change made as per change Request 38293
Disabled (0)
2 sec
Disabled (0)
Disabled (0)
Enabled (1) Validated/amende
Not defined (0) d February 2009
as part of HSPA
128 kbit/s 11425
and Second
64 kbit/s Carrier 11368
3 development. 12532
0 sec 12533
Not defined (255)
Not defined (9)
Not defined (255) Validated/amende
26 d February 2009
as part of HSPA
d February 2009
26 11270
and Second
as part of HSPA
26 Carrier
Change made as 11186
and Second
Enabled (1) development.
per Change
Carrier 38184
255 Request
development.
255 dB
1 dB
32 kbps
127
24 kbps
127
2 Validated/amende
Disabled (0) d February 2009
as part of HSPA
46 1903
and Second
100 ms Carrier
Enabled (1) development.
0
Changed to 50%
Disabled (0) after the IPD-
Changed to 50%
70% UTRAN
after the workbook
IPD- 11357
70% comparison
UTRAN workbook 11178
exercise
comparison
30 s 11328
exercise
Validated/amende
d February 2009
as part of HSPA
30 s 11195
and Second
30 s Carrier 11383
30 s development. 11303
Changed to 50%
10 after the IPD- 11267
50% UTRAN workbook 11259
2s comparison 11241
exercise
2s 11344
2s 11217
2s 11286
10 11253
0 11323
0 11317
-1.5 dB 11226
Changed to 50%
-0.7 dB after the IPD- 11360
80% UTRAN workbook 11427
5s comparison 11426
exercise
5s 11287
5s 11398
5s 11359
0s 11339
0s 11294
0s 11310
0s 11406
0 dB
0 dB
Disabled (0)
31 dBm
Measurement for periodic
trigger (0)
16 11372
Required value of
6 10 confirmed Nov 11373
10 2010 following 12558
5 trial by Pinaki 12559
Roychowdhury
Disabled (0)
Disabled (0)
Disabled (0)
Disabled (0)
Disabled (0)
Disabled (0)
0
Disabled (0)
1 CEC in CEC, 2 Validated/amende
16 d February 2009
1ROC
CECininROC,
CEC,32 Validated/amende 10217
CEC in ROC as part of HSPA
d February 2009
9 1ROC
CECininROC,
CEC,32 10219
and Second
as part of HSPA
15 CECininROC,
ROC ROC 3 10214
Carrier
and Second
0 CEC in ROC development.
Carrier
Disabled (0) development.
4
2
2
2
2
4
4
4
2
0
0
2
2
4
4
2 Validated/amende
9 d February 2009
as part of HSPA
d February 2009
9 10220
and Second
as part of HSPA
14 Carrier
Amended Nov 10215
and Second
45 development.
2010 for
Carrier Multi- 1842
Amended Nov
15 RAB
2010 Rollout
development.
for Multi- 1843
Amended Nov
28 RAB
2010 Rollout
for Multi- 1844
Validated/amende
Amended Nov
45 RAB
d
2010 Rollout
February 2009
for Multi- 1902
as part of HSPA
RAB Rollout
1 11235
and Second
1 Carrier 11275
0s development. 11280
0s 11284
disabled (0)
0 dBm
redirection allowed to all neighbors (0)
0
0
0
Changed to 0.1
0.1 dB dB Dec 2008 for 38276
HSDPA
2 (2) 11384
-101.9 dBm 11225
1 11223
1 dB 11220
SEE EMBEDDED
8 dB 11351
COMMENT
65535 dB
2 (2) 11325
0.8 dB optmised in v8.5 11380
Loose downlink
36 dBm 11248
Admission Control
11 (10) 11176
Override allowed (1)
Not applicable 0 means does not 11183

0 point to CMOB 38196
Not applicable parameters 10424
Not Applicable OUTPUT 38294
Not applicable OUTPUT 38183
EVAM non capable (1)
Disabled (0) Validated/amende
Not applicable d February 2009 OUTPUT
as part of HSPA
Not applicable OUTPUT
and Second
Not applicable Carrier
0 means does not
0 development.
point to CMOB 38138
0 means does not
0 parameters
point to CMOB 38056
only applicable to
Not applicable parameters
IMSI based
1 handover
Supported (1) 11408

-25 dB 11247
-8 dB Reduced to -3 dB 11322
-3 dB Nov2010 after trial 11193
2 dB by John Button 11390
3 dB 11385
4 dB Increased to 3 dB 11324
3 dB Nov2010 after trial 11316
O2 by John Button
-7 dB 11374
recommendation
7 dB
-2 dB Validated/amende
-11 dB d February 2009 38358
as part of HSPA
-5 dB 38059
and Second
Carrier
development.
Relevant only to
0 dB ex-Siemens Node
Validated/amende
Relevant only to 12585
0 dB B
d February 2009
ex-Siemens Node 12586
as
B part of HSPA
-11 dB Relevant only to 38001
and Second
0 dB ex-Siemens
Carrier Node 12587
O
B 2
development.
-2 dB 11405
recommendation
Lockable values 29(290); 30(300); 31(310); 32(320); 33(330)
27 dBm Lockable values defined for optimisati 10216
-3 dB Set to -3 dB 11263
following
2 dB Increased from
investigation by 0J.to +4dB following a 11370
-3 dB Button Sept 2009. 11318
RAN1202
Lockable 24 kbps
-2 dB
Paging Channel
alternative
Not in use -value
-2 dB removed. 11308
relates to SAB
-3 dB 11215
10 RAN1686 HSPA 72 Users Per Cell
65535 - Not Defined

0 11420
Disabled (0)
RAN1644
Enabled 300 ms
(1) EXCEPT for
Continuous
ATM sites wthout HSPA
Packet
VCC (0)
Disabled Connectivity
DC-HSDPA and MIMO
disabled (0)
See embedded comments
Disabled (0)
5 dB read only 11354
1.6 dB read only 11214
16 frames (2)
2s
Disabled (0)
4 Validated/amende 38182
RAN1201
d FebruaryF-2009
29
DPCH
as part of HSPA
0.05 11369
and Second
0.75 Carrier 11402
0.2 sec development.
128000 bps
0 ms (0)
Disabled (0)
0 ms (0)
512 bytes (512)
Change made as
Supported (1) per change 12536
QoS prioritization is used request 12537
for HS NRT channels (1)
0 ms
0.2 s
96000 bps
0 ms (0)
3
Disabled (0)
240 kbps, SF16 (2)
6 dB
100 ms (100)
512 bytes (512) Validated/amende
1 (Enabled) d FebruarySept
Amended 20092009 following Optimisa #N/A
as part of HSPA
64 kbps (64) 11245
and Second
64 kbps (64) Carrier 11251
1111 development.
72 38134
Number of E-DCH users is
not restricted. (0)
0 12540
0 12557
This parameter
0 needs to be set to
0 5760,2*SF2+2*SF
4(3) for HSPA+
3840 kbps,2*SF2 (2) 38135
rollout. Otherwise
Disabled (0) this parameter
10 needs to be set to
3840, 2*SF2(2)
0
30 s
40
10
30
MIMO with 64QAM disabled (0) Change Made as
16 kbps per change
Change Made as 11333
16 kbps Request
per change 11212
1024 bytes Request 11386
1024 bytes Validated/amende 11293
3 d February 2009
as
d part of HSPA
February 2009
60 s Optimised after #N/A
and
as Second
part of HSPA
10 s Enhanced
Carrier Priority 38137
and
BasedSecond
Sceduling
20 s development.
Carrier 11388
Trial in April 2008
30 s development.
- see 11289
UKRE/08/020
15 s Increased to 2 dB
Nov 2010
d February 2009
2dB 38202
following
as part oftrial
HSPA by
6 dB John Button
Changed to 7 dB 38204
and Second
7 dB January
Carrier 2010 (Set 38353
32767 dB by John Button)
development.
Validated/amende
Changed to 7 dB
7 dB d February
January 2009
2010 (Set
as
by
d part
John of HSPA
Button)
February 2009
0.5 dB Validated/amende 38355
and
as Second
part of HSPA
0.5 dB d February
Carrier 2009 38356
and
as Second
part of HSPA
35 dBm development.
Carrier 38357
and Second
0.5 dB development.
Carrier 11255
36 dBm Validated/amende 38003
32767 dBm d February 2009
Validated/amende
as part of HSPA
d February 2009
36 dBm 38004
and Second
as part of HSPA
1 dB Carrier 38005
and Second
1 dB development.
Carrier 38055
-1 dB development. 11422
0.05 11312
0.75 11421
1 frames (0)
256 bytes (256)
256 bytes (256)
100 ms (0)
0.5 Changed to 256 38058
256 bytes bytes January 11362
8 kbps 2010 after trials
-0.5 dB
30 users
0 dB
RAN1202 24 kbps
Enabled (1) RAN955 Power
Paging Channel
10 Saving Mode
RAN955 Powerfor
10 BTS
Saving
RAN955Mode for
Power
37 dBm BTS
Saving
RAN955Mode for
Power
0 BTS
Saving
RAN955Mode for
Power
31 dBm BTS
Saving
RAN955Mode for
Power
37 dBm BTS
Saving
RAN955Mode for
Power
0 BTS
Saving
RAN955Mode for
Power
37 dBm BTS
Saving
RAN955Mode for
Power
5 BTS
Saving Mode for
BTS
RAN955 Power
5 Saving
RAN955Mode for
Power
10 BTS
Saving
RAN955Mode for
Power
5 BTS
Saving
RAN955Mode for
Power
10 BTS
Saving
RAN955Mode for
Power
5 BTS
Saving
RAN955Mode for
Power
34 dBm BTS
Saving
RAN955Mode for
Power
34 dBm BTS
Saving
RAN955Mode for
Power
34 dBm BTS
Saving
RAN955Mode for
Power
0 BTS
Saving
RAN955Mode for
Power
NO (0) BTS
Saving
RAN955Mode for
Power
NoHSPA05ReConf (0) BTS
Saving Mode for
BTS
4 Validated/amende
0 d FebruarySept
as part of HSPA
0 11239
and Second
15 Carrier 11378
AAR Not Capable (1) Change made as
1 per issued 10289
1 Change
AmendedRequest
Nokia Sept 2009 following Optimisa 11332
recommended
10 km 10221
value for
CPICH Ec/No (0) aichTraTime = 0 12517
Planning Parameter Changed to value 10211
Cell
of 20Broadcast
for Non
0 Service
MBLB cells related
and a 11207
Please see comments (Not Used)
value of 49 for 12518
-92 dBm MBLB cells after
trial in Central
Enabled (1) London
0 11218
1 12538
1 12539
0 Amended Sept 2009 following Optimisa
Cell Broadcast 11196
0 Service related 11352
Planning Parameter (Not Used) 10206
Planning Parameter 10316
Enabled (1)
Not applicable OUTPUT 38275
Multiple PLMN List not
12560
broadcasted (0)
3 Lockable values: 1 or L3ockable values defined for optimisati 10731
4 11240
4 (2) 11233
20 Changed to 2 11269
following
1 investigation by J. 11190
2 Button Sept 2009. 11192
8 Alternative 11338
Cell Broadcast
lockable value
2 Service
removed. related 11410
8 (Not Used) 12561
Not used (0) 12562
Not used (0) 12563
255 highest possible
18 Reduced
redundancy to 8inNov 11181
2010
pagingfollowing
8 11234
trial by John
0 Button 11382
-24 dB 11229
0 dB 10272
To
TO2 beDefault
set value
0 dB consistently with 12589
=
To
TO20be set
Default value
0 dB Default value 2 Treselection
consistently i.e. 12590
dB; fastvalue
moving =
To 0
bothbe set bewith
shall set
Default value 2 dB Default 2 Treselection
consistently i.e.
with 10273
scenario
dB; fast value 0
moving at the
both default
shall bei.e.
set
Default value 2 dB DefaultdB
value 2 Treselection
value or at the 12591
scenario value 0
dB; fast moving at the default
bothmoving
shall be set
Default value 2 dB dB fast
value 12592
scenario value 0 at the or at the
default
scenario value
-18 dB dB fast moving
value or at the 11334
scenario
fast movingvalue
-115 dBm 11221
scenario value
Planning Parameter Reduced to 4 Nov 10207
4 2010 after trial by 11249
50 John Button 11189
0 11268
RSCP (1)
EcNo (0)
0 Increased from 11342
100ms to 600 ms
600 ms (6) 11257
following trials in
1400 msLockable
(7) Values: NotUsed (0) or April
Increased
14002009
ms (7)from 1000ms to 1400 ms follow 11285
Disabled (0)
Planning Parameter Cell Broadcast 10208
Not applicable Service related 11292
-1 dB (Not Used) 11191
-1 dB 12613
10 Set to 0dB for all 11371
15 seconds configs January 11236
2010 (Set by John
SIB4 not broadcasted (0) Button) Set to 6 12614
1 dB for FDD2 July 11299
2010 (M. Aziz).
2 dB 11213
FDD3(UMTS900)
set to 4dB and
associated rule
added for FDD1
October 2010
(M.Aziz)
Validated/amende
8 dB d February 2009 12615
as part of HSPA
16 dB default value only 10274
and Second
10 dB Carrier 12616
2 dB development. 11260
2 dB 12166
1 TO2 default = 1 12167
0 dB
0 dB Default value = Changed
2dB; fast moving following Trials
2 dB 10275
scenario value = 4 run in Nov/Dec
4 dB dB 2006 12168
-1 dB 11391
-1 dB 12169
1000 ms 10879
6s 11329
1s 11366
Optimised after
3s PS Call Re- 11274
10 s establishment
U900 Layer 11254
40 s Timer
changedT315
to Trial - 11413
Validated/amende
see UKRE/08/021
Dedicated
d February 2009
See comments 10213
Scheduler per cell
as part of HSPA
60 seconds due to HS 11271
and Second
0s Capacity
Carrier issues 11304
0 dB development.
10 ms 10877
25 ms Changed to 3s for 10666
all scenarios
3s 10271
January 2010 (set
2s by John Button) 12173
2s Validated/amende 12174
Changed
d Februaryin2009
Dec.
10661 10209
2010
as part of HSPA
99 11363
and Second
0 Carrier
Please refer to 11209
640 ms (6) development.
Trial Report 11188
234 UKRE/12/066 11399
10 11206
2 11347
2 11296
Disabled (0)
SIB Size is not available
SIB Size (9999)
is not available
(9999)
SIB Size is not available
(9999)
0 dB
Disabled (0)
20 km (3) 12584
Discrepancy
Discrepancy -
Checking New in RAN04 New in RAS05
Criticality
Frequency
Extended No Auto Disc

Discrepancy
Extended Check Required
No Auto Disc
Discrepancy
No Auto Disc
Discrepancy
No Auto Disc
Discrepancy
No Auto Disc
Discrepancy
No Auto Disc
Discrepancy
No Auto Disc
Discrepancy
No Auto Disc
Discrepancy
No Auto Disc
Discrepancy
No Auto Disc
Discrepancy
No Auto Disc
Discrepancy
No Auto Disc
Discrepancy
No Auto Disc
Discrepancy
No Auto Disc
Discrepancy
No Auto Disc
Discrepancy
No Auto Disc
Discrepancy Check Required
Discrepancy Monthly
Daily
No Auto Disc
Check Required
Discrepancy Monthly
Discrepancy Monthly
Discrepancy Monthly
Daily
Discrepancy Daily
Discrepancy Daily
No Auto Disc
Discrepancy
Check Required
Discrepancy Every 2 Hours
Discrepancy Daily
Weekly
Weekly
Weekly
Weekly
Extended
Weekly
Discrepancy
Discrepancy Every 2 Hours New in RAS05
Weekly
Daily
Weekly

No Auto Disc
Discrepancy
Check Required
Critical Every 2 Hours

Daily
Daily
No Auto Disc
Discrepancy
Check Required
Discrepancy Daily
Daily
Daily
Every 2 Hours New in RAS05
Weekly
Weekly
Weekly
Discrepancy Monthly New in RAS05
No Auto Disc
Discrepancy
Check Required
No Auto Disc
Discrepancy New in RAN04
Check Required
Extended
Weekly
Discrepancy
Discrepancy Monthly New in RAS05
Daily
Weekly
Daily
Weekly
Discrepancy Daily
Discrepancy Daily
Extended
Weekly
Discrepancy
Every 2 Hours

Discrepancy Daily
Discrepancy Daily
Discrepancy Daily
Extended
Monthly
Discrepancy
Extended
Monthly
Discrepancy

Discrepancy Daily
Discrepancy Daily
Discrepancy Daily
Discrepancy Daily
No Auto Disc
Discrepancy
Check Required
No Auto Disc
Discrepancy
Check Required
No Auto Disc
Discrepancy
Check Required
No Auto Disc
Discrepancy
Check Required
No Auto Disc
Discrepancy
Check Required
No Auto Disc
Discrepancy
Check Required
No Auto Disc
Discrepancy
Check Required
No Auto Disc
Discrepancy
Check Required
No Auto Disc
Discrepancy
Check Required
No Auto Disc
Discrepancy
Check Required
No Auto Disc
Discrepancy
Check Required
No Auto Disc
Discrepancy
Check Required
No Auto Disc
Discrepancy
Check Required
No Auto Disc
Discrepancy
Check Required
No Auto Disc
Discrepancy
Check Required
Discrepancy Daily
No Auto Disc
Discrepancy
Check Required
No Auto Disc
Discrepancy
Check Required
No Auto Disc
Discrepancy
Check Required
Discrepancy Daily
No Auto Disc
Discrepancy
Check Required
No Auto Disc
Discrepancy
Check Required
No Auto Disc
Discrepancy
Check Required
Discrepancy Daily
Discrepancy Daily
Extended
Monthly
Discrepancy
Extended
Monthly
Discrepancy

Every 2 Hours
Discrepancy Daily
Discrepancy Daily
Discrepancy Daily
Discrepancy Daily
Daily
Discrepancy Daily New in RAS05
Discrepancy Daily
Discrepancy Daily
Discrepancy Daily

Discrepancy Daily

Monthly
Daily
No Auto Disc
Check Required
No Auto Disc
New in RAS05
Check Required
No Auto Disc
Check Required
Monthly
No Auto Disc
Check Required
No Auto Disc
New in RAS05
Check Required
No Auto Disc
Check Required
Discrepancy Every 2 hours New in RAS05

Discrepancy Every 2 hours
Every 2 Hours
Every 2 hours
Every 2 hours
Every 2 hours
Every 2 hours
Extended
Weekly
Discrepancy
Extended
Weekly
Discrepancy
Every 2 hours
Extended
Weekly
Discrepancy
Every 2 hours
Discrepancy Every 2 hours New in RAN04
Weekly
Discrepancy Monthly
Weekly
Discrepancy Daily
Discrepancy Weekly
Discrepancy Weekly
Discrepancy Weekly
Daily
Daily
Discrepancy Weekly
Discrepancy Weekly
Extended
Weekly
Discrepancy
Every 2 Hours
Daily
Extended
Weekly
Discrepancy
Extended
Weekly
Discrepancy
Daily

Discrepancy Weekly
Discrepancy Weekly
Daily
No Auto Disc
Check Required
Daily
Weekly New in RAS05
Weekly New in RAS05
Daily
Daily
Every 2 Hours
Every 2 Hours
Daily
Daily
Every 2 Hours
Discrepancy Daily
Daily
Every 2 Hours

Daily
Daily
Discrepancy Daily
Discrepancy Daily
Discrepancy Daily
Daily
Discrepancy Daily
Weekly
No Auto Disc
Check Required
No Auto Disc
Check Required
No Auto Disc
Check Required
No Auto Disc
Check Required
No Auto Disc
Check Required
No Auto Disc
Check Required
No Auto Disc
Check Required
No Auto Disc
Check Required
No Auto Disc
Check Required
No Auto Disc
Check Required
No Auto Disc
Check Required
No Auto Disc
Check Required
No Auto Disc
Check Required
No Auto Disc
Check Required
No Auto Disc
Check Required
No Auto Disc
Check Required
No Auto Disc
Check Required
No Auto Disc
Check Required

Discrepancy Daily
Discrepancy Weekly
Discrepancy Daily

Extended
Weekly
Discrepancy
Discrepancy Monthly New in RAN04
Extended
Weekly
Discrepancy
No Auto Disc
Discrepancy
Weekly
Discrepancy
Extended
Weekly
Discrepancy
Discrepancy Weekly
Every 2 Hours
Weekly
Discrepancy
Every 2 Hours
Discrepancy
Discrepancy Daily
Discrepancy Daily
Discrepancy Daily
Discrepancy Monthly
No Auto Disc
Discrepancy
Check Required
Discrepancy
No Auto Disc
Discrepancy
No Auto Disc
Discrepancy Weekly
Discrepancy Weekly
Discrepancy Daily
No Auto Disc
Discrepancy
Check Required
Extended
Weekly
Discrepancy
Extended
Weekly
Discrepancy
Extended
Every 2 Hours
Discrepancy
Extended
Every 2 Hours
Discrepancy
Discrepancy Daily
Discrepancy Daily
Discrepancy Monthly
Discrepancy Monthly
Discrepancy Weekly

No Auto Disc
Discrepancy New in RAN07
Check Required
Discrepancy Monthly
Discrepancy Monthly
Extended
Weekly
Discrepancy
Discrepancy Monthly
No Auto Disc
Discrepancy
Check Required
Extended
Weekly
Discrepancy
Extended
Weekly
Discrepancy
Discrepancy Daily
Extended
Weekly
Discrepancy
Extended
Weekly
Discrepancy

Extended
Weekly
Discrepancy
Extended
Weekly
Discrepancy
Discrepancy Daily
Discrepancy Daily
Discrepancy Daily
Discrepancy Daily
Discrepancy Daily
Discrepancy Daily
Discrepancy Monthly
Extended
Weekly
Discrepancy
Extended
Weekly
Discrepancy
Discrepancy Daily
Extended
Weekly
Discrepancy
Extended
Weekly
Discrepancy
Monthly
Discrepancy Weekly
Discrepancy Weekly
No Auto Disc
New in RAS05
Check Required
No Auto Disc
New in RAS05
Check Required
No Auto Disc
New in RAS05
Check Required
Discrepancy Weekly New in RAS05

Extended
Monthly
Discrepancy
New in RAS05.1 New in RAS06 New in RU10
New in RU10
New in RU10
New in RU10
New in RU10
New in RU10
New in RU10
New in RU10
New in RU10
New in RU10
New in RU10
New in RU10
New in RU10
New in RU10
New in RU10
New in RU10
New in RU10
New in RAS05.1
New in RAS05.1
New in RAS06
New in RU10
New in RAS06
New in RAS06
New in RAS06
New in RAS06
New in RAS06
New in RAS05.1
New in RAS06
New in RAS05.1
New in RU10
New in RAS06
New in RU10
New in RAS06
New in RAS06
New in RU10
New in RU10
New in RAS06
New in RAS06
New in RAS05.1
New in RAS05.1
New in RAS05.1
New in RAS05.1
New in RAS05.1
New in RAS05.1
New in RAS05.1
New in RAS05.1
New in RAS05.1
New in RAS05.1
New in RAS05.1
New in RAS05.1
New in RAS05.1
New in RAS05.1
New in RAS05.1
New in RAS05.1
New in RAS05.1
New in RAS05.1
New in RAS05.1
New in RAS05.1
New in RAS05.1
New in RAS05.1
New in RAS05.1
New in RAS05.1
New in RAS05.1
New in RAS05.1
New in RAS05.1
New in RAS05.1
New in RU10
New in RU10
New in RAS05.1
New in RAS05.1
New in RAS05.1
New in RAS06
New in RAS05.1
New in RAS05.1
New in RAS05.1
New in RAS05.1
New in RAS06
New in RAS06
New in RAS06
New in RAS06
New in RAS06
New in RAS06
New in RAS06
New in RAS06
New in RAS06
New in RAS06
New in RU10
New in RU10
New in RAS06
New in RU10
New in RAS06
New in RU10
New in RU10
New in RAS06
New in RAS05.1
New in RAS05.1
New in RAS06
New in RU10
New in RU10
New in RAS06
New in RAS06
New in RAS06
New in RAS06
New in RAS06
New in RAS06
New in RAS06
New in RAS06
New in RAS06
New in RAS06
New in RAS06
New in RAS06
New in RAS06
New in RAS06
New in RAS06
New in RAS06
New in RU10
New in RU10
New in RU10
New in RU10
New in RAS06
New in RU10
New in RU10
New in RU10
New in RU10
New in RU10
New in RU10
New in RU10
New in RU10
New in RU10
New in RU10
New in RU10
New in RU10
New in RU10
New in RU10
New in RU10
New in RU10
New in RU10
New in RU10
New in RU10
New in RU30
New in RU30
New in RU20
New in RU20
New in RU20
New in RU20 on TOP
New in RU30
New in RU30
New in RU30
New in RU30
New in RU20
New in RU20
New in RU20
New in RU20
New in RU30
New in RU30
New in RU20
New in RU30
New in RU20
New in RU30
New in RU20 on TOP
New in RU30
New in RU30
New in RU20
New in RU20
New in RU20
New in RU20
New in RU20
New in RU20 on TOP

New in RU20 on TOP
New in RU20
New in RU20
New in RU20
New in RU20 on TOP
New in RU20 on TOP

New in RU20 on TOP
New in RU20 on TOP

New in RU20 on TOP
New in RU30
New in RU30
New in RU30
New in RU30
New in RU30
New in RU30
New in RU20 on TOP
New in RU20 on TOP

New in RU20 on TOP
New in RU20 on TOP
New in RU30
New in RU30
New in RU20 on TOP
New in RU20 on TOP
New in RU30
New in RU20 on TOP

New in RU20 on TOP
New in RU20 on TOP
New in RU20 on TOP
New in RU30
New in RU30
New in RU30
New in RU30
New in RU30
New in RU20
New in RU20
New in RU20
New in RU30
New in RU20 on TOP
New in RU20
New in RU30
New in RU30
New in RU30
New in RU30
New in RU30
New in RU20 on TOP
New in RU20 on TOP
New in RU30
New in RU30
New in RU30
New in RU20
New in RU20 on TOP
New in RU20
New in RU20
New in RU20
New in RU20
New in RU20
New in RU20
New in RU20
New in RU20
New in RU20 on TOP
New in RU20
New in RU20
New in RU20
New in RU20
New in RU20
New in RU20
New in RU20
New in RU20
New in RU20
New in RU20
New in RU20 on TOP
New in RU20 on TOP
New in RU20 on TOP

New in RU20 on TOP
New in RU20 on TOP
New in RU20 on TOP
New in RU20 on TOP
New in RU20 on TOP

New in RU40 8.00

4.50
4.50
4.50
4.50
5.80
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
New in RU40 8.00

New in RU40 8.00
New in RU40 8.00
New in RU40 8.00
9.00
9.00
8.10
4.30
9.00
4.30
9.00
4.30
9.00
8.17
New in RU40 8.00

Issue 5.5
5.13
4.30
New in RU40 8.00
New in RU40 8.00
New in RU40 8.00

New in RU40 8.00
5.13
5.30
New in RU40 8.00

New in RU40 8.00
New in RU40 8.00
New in RU40 8.00
New in RU40 8.00
New in RU40 8.00
New in RU40 8.00
Issue 5.5
4.00
4.00
9.00
5.30
New in RU40 8.00
5.40
9.00
9.01
9.00
9.00
9.01
8.30
8.30
9.01
9.01
4.50
9.00
9.00
9.20
New in RU40 9.00
6.70
6.70
9.00
New in RU40 8.00
New in RU40 8.30
5.80
5.70
5.70
New in RU40 8.00
New in RU40 8.00

New in RU40 8.00
New in RU40 8.30
9.00
9.00
4.50
4.50
New in RU40 9.00
New in RU40 9.00
New in RU40 9.00
5.30
8.14
5.30
5.70
New in RU40 9.00
New in RU40 9.00
New in RU40 9.00
9.00
9.00
9.00
5.30
New in RU40 8.00
8.17
New in RU40 8.00
New in RU40 8.00
5.80
5.80
5.80
5.80

5.40
4.50
New in RU40 8.00

5.13
8.14
5.30
New in RU40 8.00

5.30
8.14
5.30
5.40
8.14
5.40
5.40
New in RU40 9.00

New in RU40 8.70
New in RU40 9.00
New in RU40 9.00
New in RU40 8.00
New in RU40 8.00
9.00
9.00
9.01
9.00
9.00
9.00
9.00
9.00
4.50
4.50
4.50
9.01
9.00
9.00
9.00
New in RU40 8.30
New in RU40 8.00

New in RU40 8.00
8.17
New in RU40 9.00
9.00
9.00
9.00
9.00
9.00
New in RU40 8.00
New in RU40 8.00
New in RU40 8.00
9.00
9.00
New in RU40 8.00
9.00
9.00
5.70
8.19
New in RU40 8.00
New in RU40 8.00
New in RU40 8.00
New in RU40 8.00
New in RU40 8.00
New in RU40 8.00
New in RU40 9.00
New in RU40 8.00
New in RU40 8.00
New in RU40 8.00
5.70
New in RU40 8.16

9.00
4.50
4.50
Issue 5.5
New in RU40 8.16
New in RU40 8.00
New in RU40 8.00
New in RU40 8.16
New in RU40 8.00
New in RU40 9.00
9.00
9.00
9.00
5.40
9.00
New in RU40 8.00
9.01
9.01
New in RU40 8.00
9.01
New in RU40 8.00

New in RU40 9.00
New in RU40 9.00
New in RU40 8.00
9.00
9.2
New in RU40 8.00
New in RU40 8.00
9.00
9.00
4.30
5.90
9.00
New in RU40 8.00

5.70
4.30
9.00
4.50
9.00
6.90
9.00
New in RU40 8.00
4.50
4.50
4.30
9.00
9.00
9.00
4.00
9.00
9.00
4.50
4.50
4.50
New in RU40 8.00
5.40
9.00
4.50
4.50
9.00
4.50
4.50
9.00
9.00
9.00
9.00
9.00
9.00
New in RU40 8.00
9.00
9.00
9.00
9.00
4.50
9.00
4.50
9.00
4.50
9.00
4.50
4.50
9.00
9.00
9.00
4.50
9.00
9.00
9.00
9.00
Issue 6.2
9.00
9.00
4.50
4.50
5.50
9.00
9.00

4.50
WRAB Parameters
Abbreviated Name

WRABId
DeltaSIR - DeltaSIRAfterDownlink
DeltaSIR - DeltaSIRAfterUplink
DeltaSIR - DeltaSIRDownlink
DeltaSIR - DeltaSIRUplink
DownlinkOrthog
EbNoDCHOfPSNRT - EbNoDCHOfPSNRTPrim
EbNoDCHOfPSNRT - EbNoDCHOfPSNRTPriQua
EbNoDCHOfPSNRT - EbNoDCHOfPSNRTSec
EbNoDCHOfPSNRT - EbNoDCHOfPSNRTSecQua
EbNoDCHOfPSNRT - EbNoDCHOfPSNRTSelQuaDL
EbNoDCHOfPSNRT - EbNoDCHOfPSNRTSelQuaUL
EbNoDCHOfPSStr - EbNoDCHOfPSStrPrim
EbNoDCHOfPSStr - EbNoDCHOfPSStrPriQua
EbNoDCHOfPSStr - EbNoDCHOfPSStrSec
EbNoDCHOfPSStr - EbNoDCHOfPSStrSecQua
EbNoDCHOfPSStr - EbNoDCHOfPSStrSelQuaDL
EbNoDCHOfPSStr - EbNoDCHOfPSStrSelQuaUL
EbNoDCHOfSRB - EbNoDCHOfSRB136
EbNoDCHOfSRB - EbNoDCHOfSRB136Qua
EbNoDCHOfSRB - EbNoDCHOfSRB34
EbNoDCHOfSRB - EbNoDCHOfSRB34Qua
EbNoDCHRateGain - EbNoDCHRateGainCSAMR
EbNoDCHRateGain - EbNoDCHRateGainCSData
EbNoDCHRateGain - EbNoDCHRateGainPSData
EbNoDCHRateGain - EbNoDCHRateGainSFDown
EbNoDCHRateGain - EbNoDCHRateGainSFUp
EbNoDCHRateGain - EbNoDCHRateGainSRB
EbNoDCHRxDiv2
EbNoDCHRxDiv4
EbNoDCHTxDiv
EbNoEDCHCSAMR
EbNoEDCHOfPSStr - EDCHPSStr128Kbps
EbNoEDCHOfPSStr - EDCHPSStrOver248Kbps
EbNoOfCSData - EbNoDCHOfCSDataNT
EbNoOfCSData - EbNoDCHOfCSDataNTQua
EbNoOfCSData - EbNoDCHOfCSDataT
EbNoOfCSData - EbNoDCHOfCSDataTQua
EbNoOfCSNBAMR - EbNoDCHOfCSNBAMR122
EbNoOfCSNBAMR - EbNoDCHOfCSNBAMR59
EbNoOfCSNBAMR - EbNoDCHOfCSNBAMRb
EbNoOfCSNBAMR - EbNoDCHOfCSNBAMRc
EbNoOfCSNBAMR - EbNoDCHOfCSNBAMRQua
EbNoOfCSWBAMR - EbNoDCHOfCSWBAMR1265
EbNoOfCSWBAMR - EbNoDCHOfCSWBAMRb
EbNoOfCSWBAMR - EbNoDCHOfCSWBAMRQua
EDCHBLERAdjCSVoice10
EDCHBLERAdjCSVoice2
L1BLERTEDCHVoice10
L1BLERTEDCHVoice2
SIRDPCCHInitialDCH - SIRDPCCHInitialDCH128
SIRDPCCHInitialDCH - SIRDPCCHInitialDCHHS128
SIRDPCCHInitialDCH - SIRDPCCHInitialDCHMax
SIRDPCCHInitialDCH - SIRDPCCHInitialDCHMin
SIRDPCCHInitialDCH - SIRDPCCHInitialDCHOffset
SIRDPCCHInitialDCH - SIRDPCCHInitialDCHRxDiv2
SIRDPCCHInitialDCH - SIRDPCCHInitialDCHRxDiv4
O&M Parameters
WRABChangeOrigin
WRAB Identifier WRAB AC

Downlink delta SIR after in the compressed mode WRAB AC
Uplink delta SIR after in the compressed mode WRAB AC
Downlink delta SIR in the compressed mode WRAB AC
Uplink delta SIR in the compressed mode WRAB AC
Downlink orthogonality factor WRAB AC
Primary Eb/N0 of the PS NRT DCH WRAB AC
Primary quality target of the PS NRT DCH WRAB AC
Secondary Eb/N0 of the PS NRT DCH WRAB AC
Secondary quality target of the PS NRT DCH WRAB AC
Quality target selector for DL PS NRT DCH WRAB AC
Quality target selector for UL PS NRT DCH WRAB AC
Primary Eb/N0 of the PS streaming DCH WRAB AC
Primary quality target of the PS streaming DCH WRAB AC
Secondary Eb/N0 of the PS streaming DCH WRAB AC
Secondary quality target of the PS streaming DCH WRAB AC
Quality target selector for DL PS streaming DCH WRAB AC
Quality target selector for UL PS streaming DCH WRAB AC
Planned Eb/N0 of the SRB13.6 DCH WRAB AC
Quality target of the SRB13.6 DCH WRAB AC
Planned Eb/N0 of the SRB3.4 DCH WRAB AC
Quality target of the SRB3.4 DCH WRAB AC
Data rate gain for the Eb/N0 of the CS AMR WRAB AC
Data rate gain for the Eb/N0 of the CS data WRAB AC
Data rate gain for the Eb/N0 of the PS data DCH WRAB AC
Data rate gain selector for the Eb/N0 of the DL DCH WRAB AC
Data rate gain selector for the Eb/N0 of the UL DCH WRAB AC
Data rate gain for the Eb/N0 of the SRB WRAB AC
Cell offset in the UL Eb/N0, 2-way Rx diversity WRAB AC
Cell offset in the UL Eb/N0, 4-way Rx diversity WRAB AC
Cell offset in the DL Eb/N0 definition WRAB AC
Eb/N0 planned for the E-DCH MAC-d flow of CS voice WRAB AC
EbNo for E-DCH Streaming 128Kbps WRAB AC
EbNo for E-DCH Streaming over 248Kbps WRAB AC
Planned Eb/N0 of the CS non transparent data WRAB AC
Quality target of the CS non transparent data WRAB AC
Planned Eb/N0 of the CS transparent data WRAB AC
Quality target of the CS transparent data WRAB AC
Planned Eb/N0 of the CS NB-AMR 12.2 WRAB AC
Planned Eb/N0 of the CS NB-AMR 5.9 WRAB AC
Planned Eb/N0 the CS NB-AMR subflow B WRAB AC
Planned Eb/N0 the CS NB-AMR subflow C WRAB AC
Quality target of the CS NB AMR WRAB AC
Planned Eb/N0 of the CS WB-AMR 12.65 WRAB AC
Planned Eb/N0 the CS WB-AMR subflow B WRAB AC
Quality target of the CS WB-AMR WRAB AC
HARQ threshold for OLPC of HS CS voice E-TTI 10 ms WRAB AC
HARQ threshold for OLPC of HS CS voice E-TTI 2 ms WRAB AC
BLER target for the HS CS voice E-TTI 10 ms WRAB AC
BLER target for the HS CS voice E-TTI 2 ms WRAB AC
UL SIR target without HS-DPCCH - DPDCH SF 128 WRAB AC
UL SIR target without HS-DPCCH and DPDCH SF 8 WRAB AC
UL SIR target with HS-DPCCH - DPDCH SF 128 WRAB AC
Maximum SIR target for UL DPCCH with DPDCH only WRAB AC
Minimum SIR target for UL DPCCH with DPDCH only WRAB AC
SIR target for UL outerloop power control with DPDCH WRAB AC
SIR target for UL DPCCH with DPDCH, 2-way Rx diversity WRAB AC
SIR target for UL DPCCH with DPDCH, 4-way Rx diversity WRAB AC
Change origin WRAB O&M
This parameter defines the planned Eb/N0 for the
primary quality target of the DCHs which are
This parameter
transferring radio defines
bearers theofplanned the PS interactive Eb/N0 for the
secondary
and background qualityRABs. targetThe of the DCHs which are
management
transferring
parameter "Primary radio bearers qualityoftarget the PS of interactive
the PS NRT
and
DCH" background
defines theRABs. appropriate The management value of the
parameter
primary quality "Secondary target. This quality target ofisthe PS
parameter
NRT DCH" defines
applicable for the DCH user data rates the appropriate value 8, of 16,the 32,
primary
64, 128,quality 256, and target.384 This kbpsparameter when the 1-way is
applicable
receiver diversity for the is DCH assumed. user data Therates value8,of16, the32,
This
64, parameter
128, 256, and identifies
384 the kbps thewhen WRAB the object
1-way
parameter represents low data rate value
uniquely.
receiver
This
without parameter
the
The object
diversity
possible isDescription
defines contains
assumed.
data the rate offsetthe
Theconnection
gain. invaluethe downlink
The of the
data rate
Range and Step
based
parameter
SIR targetquality value control
represents to be parameters.
the
set low
in the data UE Parameters
rate
one value
frame
gain
This value is defined
parameter defines separately
the offset within thetheuplink
define
without
after the thethe service
frame possible bearer
containing data"Data and
rate
thethe signaling
gain.
start ofThe the bearer
data
first rate
management
SIR target value parameter
to be set in rate
BTS gain one forframethe
specific
gain value
transmission qualityis defined
gap targets
in the and
separately related
transmission with power the
gap control
pattern.
Eb/N0
after of
the frame the PS NRT
containing DCH". the The decision
startinofthe thedownlink
first
thresholds
This parameter forthe each
defines transport the channel
management
The
whethervalue
transmission the of dataparameter
gap parameter
rate
in the gain "Data isoffset
does
transmission
rate
applied notgain include
with
gap
fora the
pattern. the
1...5, step 1
configuration.
SIR
Eb/N0
effect target
of of the
the value
bitPS rateto
NRT be set
DCH".
increase in the
The
during UE decisionduring
the the
particular
This
The parameter
value physical
of thedefinesdefineschannel
parameter the data
offset
does
primary ratein is
the
notquality includedone
uplink with
theof
This
frame
whether parameter
compressed
the
SIR containing
management
target thevalue data
frame. the
rate
to start
parameters
be gain
set
the
whether
of isorthogonality
the
applied
"Data
inorthogonality
the
the
first
BTS
primary
transmission
with
rateduring atarget
factor
gain or
the 0...3 dB, step 0.1 dB
effect
for
the
gap the of DCHs
downlink
secondary
in the the bit rate
which
channel.
quality
transmission increase
are The
targettransferring
gap isduring
used
pattern. the
radio
for
The a bearers
factor
value of
particular
selector
This
frame parameter for
containingphysical
the Eb/N0
defines
thechannel ofwhether
start theofdata UL DCH"
the rate
the
first is for
primary done
transmission uplink with
or 0...3 dB, step 0.1 dB
compressed
of the
quantifies
particular
the PS
parameter the
data frame.
interactivedelay
rate
does of and
spread
not the background
offor
downlink
include the the downlink
DCH
effectRABs. which
of The
the is
and
the
gap
This management
"Data
secondary
in theValue
parameter rate gain
quality
transmission parameters
defines selector
target
gap
the is "Data the
used
pattern.
secondary rate
Eb/N0
for
The a gain
quality of
valuethe the of
management
channel.
transferring
bit rate
selector increase
for radio
the parameters
1Eb/N0
of
during theof
bearer the "Quality
parameter
of
the the
compressed
UL PSDCH" target
represents
interactive selector
forframe.
uplink or 0...3 dB, step 0.1 dB
DL
the
target
for DCH"
particular
parameter
uplinkfor for
data
the
PS downlink.
DCHs
NRT rate
does of
DCH"not
whichtheThe uplink
include
and are final planned
DCH
the
transferring
"Quality effect which
target primary
ofradiois
the
channel
background
and
Eb/N0 "Data valuewithout
rateRAB.
isPS gainany
obtained multipath
Either
selector of the
by the for
adding propagation.
two
the quality
Eb/N0
the data ofThe
target
ratethe
This
bearers
selectorparameter
transferring
bit rate increase
of
for theradio
downlink defines
bearer
during
interactive
PS theof
compressed
NRT value
and PS
DCH" of the
interactive
frame.
background
enable planned you or 0...3 dB, step 0.1 dB
orthogonality
values,
DL
gain DCH"
to which
the for factor
are
downlink.
Eb/N0 is
defined
value used
Theof with
thein
final defining
the management
planned
parameter. the code
The
Eb/N0
background
RABs.
to select for
The the RAB. DCH
management which
Either oftransfers
the
parameters two the
quality signalling
"Quality target
power
parameters
secondary
resulting of the the
Eb/No
DCH
Eb/N0radio
"Primary value
user
link.
value data
quality
isthe is
applied
rates
target
obtained inof
8,ofby 16,
the
producing
32,
adding PS64, NRT the
the
0...1, step 0.01
radio
values,
This
target
128, bearerwhich
parameter
selector
256, and ofare the
for
384 data
defined
defines
uplink
kbps rate
PS
for with 13.6
value
NRT
which the kbps.
management
DCH"
this thequality One-way
data
andPSrate
DCH"
This
data
service
receiver
parameters and
parameter
rate specific"Secondary
gain
diversity to
"Primary defines
the
rateis Eb/N0 quality
matching
assumed
qualitythe valuetotarget of
attributes.
target be used.
of of
the the the
data
planned
The
PS rate
NRT -11...20 dB, step 0.1 dB
gain
"Quality
target foris thetarget
used, planned selector
separately Eb/N0s forfor of
downlink
the the uplinkDCHs
PS NRT
and which
NRT
gain
Eb/N0 DCH",
for
parameter.
management
DCH" for
and the the can
planned
The DCH be which
parameter
"Secondary assigned
resulting Eb/N0s Eb/No
transfers
"Quality
quality totarget
of each
the
value DCHs
the
target ofof the which
issignalling
applied
of
the the
PSDCH
transfer
downlink
This enable
parametertheDCHs. radioyou bearers
to
defines select the of the the
value DCHCS of256, data
user
the RABs.
data
data rate -6.3...0, step 0.1
user
transfer
in data
producing
radio
SRB13.6 bearer the rates
DCH" radio
the
of 8,
the 16,
bearers
service
definesdata 32, 64,
of
specific
rate
the 128,
the
3.4
appropriate CS
rate
kbps. AMRmatching and
One-way
value RAB.384
NRT
Data
rates
gain
kbps.
DCH",
services
8,
for
If a16,
the DCH
can
32,
plannedare begenerally
64,
user
assigned
128,
Eb/N0s
data 256,
rate
to each
encoded
ofand
is the 384
selectedDCHs
of
withkbpstheTurbo,
which
with forof
DCH
the
Higher
attributes.
receiver
the
userDCH data transmission
diversity
quality
rates 8, is
target. power
assumed
16, efficient
32, The is used
to
management be for
used. the The -11...20 dB, step 0.1 dB
which
transfer
parameter,
becomes
this the quality
radio
then
more
thetarget
bearers
primary is64, used,
of
128,
the with
quality PS
256,
the
separatelystreaming,
target
and for
higher
is
384
used
DPCCH
management
parameter
kbps.
data If a DCH
rates, with "Data the
in the userhigher
parameter
rate
same gain
data physical
way"Quality
forasthe
rate channel
target
Eb/N0 of
isinterleaving
selected of data
the
withthe
does. the -6.3...0, step 0.1
the
for uplink
interactive
it; otherwise and
and downlink
background
the secondary DCHs. RABs. quality Data target services is
rates,
SRB3.4
SRB"
parameter,
Higher which
definesDCH" improves
then
transmission defines
the thedata the
primary
power ratechannel
appropriate
gain
is quality
used value estimation
target
for value
when
the of
the
is used
are
used.
and,
the generally
DCHconsequently,
quality encodedtarget.the with
Eb/N0
The Turbo, performance.
management which Bit 0: 8 kbps, Bit 1: 16 kbps, Bit 2: 32 kbps, Bit 3: 64 kbps, Bit
SRB
for it;
DPCCH is transferred
otherwise
with the
theefficient with
higher secondary the
datahigher quality
rates; data rate is
target
it improves
becomes
Therefore
This parameter
parameter more
the
"Data ratedefines
ratematchinggain with
the for the
Eb/N0s
value the higher
of
Eb/N0 candata
the be
data
of the rate 4:
Bit128
0: 8kbps,
kbps,Bit
Bit5:
1:256 kbps, Bit
16 kbps, Bit 2:
6: 32
384 kbps,
kbps, Bit 3: 64 kbps, Bit
services.
used.
the channel Theestimation
decision whether and the data
consequently rate
the gain
rates,
reduced
gain
SRB" forin the
defines the
also samefor
planned
the the way
data low
Eb/N0 asdata
rate interleaving
of
gain rate
the valuebearers,
DCH does.
whenwhich suchthe 4: 128 kbps, Bit 5:0.1
256
is applied
Eb/N0
This
Higher
as CS parameter with
performance.
transmission
a particular
defines Therefore
power the physical
planned
is the
useddata
channel
rate
for Eb/N0 thematching data
for the -11...20 dB, step dBkbps, Bit 6: 384 kbps,
SRB
rate
Eb/N0s
primaryisisAMR,
transfers done
can thebe
transferred
quality
when
signalling
with the
reduced
target
they
with are
radio
the
management
of also
the
transferred
bearers.
higher
foritthe
DCHs parameters
whichlow in
Higher
rate
datathe
are rate
DPCCH
multiservice
transmission
This parameter with higher
configuration
power defines data
is used the rates;
of an
for the
primary improves
aggregate
DPCCH
quality the
data
with
services.
"Data
bearers rate
transferring
The
when gain
radio
decision
selector
they are
bearers
whether
forofthe
transferred the
thein
Eb/N0
PS
data the of rate
streaming thetargetULgain -6.3...0, step 0.1
channel
rate
higher
for
is which
the
applied DCHs estimation
physical isconfiguration
with high achannel
which and
enough.
are
particular consequently
data
transferring
physicalrates, which
radio
channel the Eb/N0 bearers
data
DCH"
This
RABs. for
multiservice
parameter
The uplink
management and
defines "Data the ofrate an
planned
parameter gain
aggregate selector
Eb/N0
"Primary data
for forthe -11...20 dB, step 0.1 dB
performance.
The
of
ratetheselector
improves
is PSdone the
streaming
with Therefore
parameters
channel the the
"Data
estimation
RABs.
management rate
The matching
rateand
managementgain
parameters selector
the
rate Eb/N0
which
secondary
quality target of
is the
high
qualityof DL
the target
PSDCH"
enough. for
The
of the
streaming downlink.
selector
DCHs DCH" which The
defines final
are
Eb/N0s
This
for the
consequently
parameters
"Data rate cangain
parameter
Eb/N0 be of
the
"Quality reduced
defines
theEb/N0
selector UL
target also
the
DCH"
performance.
for for
secondary
selector
the and the
Eb/N0 "Datalow
for of data
quality
rate
Therefore
uplink
theEb/N0 ULrate
gain
PS -6.3...0, step 0.1
planned
parameters
transferring
the appropriate Eb/N0 "Data
radio value rate
bearers
value is
of achieved
gain theof selector
the
primary PS by adding
for
streaming
quality the the
bearers
target
selector
the
DCH" rate
streaming for
for when
forthe
matching the
DCH"
uplink they
DCHs Eb/N0
and
and are
which
Eb/N0s oftransferred
"Quality
"Data the are
can
rate DL be
target
gain in
transferring
DCH"reduced the
selectordefine radio
also the
for for
data
This
of
RABs.
target.
This rate
theparameter
ULThe
This
parameter gain
DCH" value
management
parameter defines
and "Data
defines to is the
whether
the Eb/N0
rate
parameter
applicable
quality the
gain value primary
selector
"Secodary
for
target offor
the the
DCH or
for
the Bit 0: 8 kbps, Bit 1: 16 kbps, Bit 2: 32 kbps, Bit 3: 64 kbps, Bit
multiservice
bearers
physical
the low
downlink
Eb/N0 of PS the
channel
data of configuration
rate PS
streaming
the streaming
data
bearers,
DL DCH" rates
DCH" of
such
for an
RABs.
(spreadingaggregate
as
enable
downlink. The
signaling
you factors)
The to dataradio
final
parameter.
secondary The resulting
quality target Eb/No is128,usedvalue for is applied
adefines 4:
the
DCH
This
rate
for
Eb/N0
quality
user data
which
management
which
bearers,
select
planned
target
which
parameter
thedata
of
rates
the
when
DCH
Eb/N0
the
of
istransfers
high 8, DL
the
parameters
datathey
user
value
16,
defines PSDCH"
enough.
rate
are 32,
the
data
is gain 64,define
streaming
signalling
whether The
"Quality
transferred
rates
achieved is 8,the
the
DCH"
selector
valid. and
radio
target
16,
by inIf
physical
primary
the
the
32,
adding
256 bearer kbps
selector
value
64, or of
the Bit128
0: 8kbps,
kbps,Bit
Bit5:
1:256 kbps, Bit 2: 32 kbps, Bit 3: 64 kbps, Bit
16 kbps,
This
in the
channel
the
when parameter
particularproducing
appropriate
the data
1-way ratesdefines
ratethe
value of service
the
(spreading
receiver of whether
thedownlink
diversity specific the
factors)
secondary is DCHdata
rate
assumed.for rate
which
which
quality is
of
the
the
128,
datathe
parameters
for uplinkdata
secondary
selector
multiservice
and
rate PS
256
gain rate
"Data
parameter 13.6
quality
streaming
configuration
kbps
value rate
for kbps.
to target
gainDCH"
shows
which
the ofThe
Eb/N0is
selector
an andsame
used
that
this "Quality
with
aggregate
quality
value quality
for the aof
target Eb/N0
target
data
the is 4: 128 kbps,
gain
matching
the is
transferring
data
target. appliedattributes.
rate radio
gainwith is a
bearer particular
valid. of If thethe downlink
PSvalue streaming of DPDCH
the -11...20 dB, step 0.1 dB
This
The
target
particular
of
ratethe
selector
maximum
used, isThis
parameter
value
UL
which
parameter. used
for
separately of
data
DCH"
is
parameter
thefor
downlink
DPDCH
The high defines
rate parameter
andthe data
enough.
for
resulting PS
the
iswhether
uplink
of"Datathe theapplicable
uplink
uplink
Eb/No
quality
represents
and
rate
streaming
rate the thetarget
downlink
DCH
gain
andgain
value
for
data
selector
DCH"
downlink the
iswhich
is256
for
rateDCH
low
DCHs
enable
applied
the
is
for
data
RAB.
selector
user
DCH
gain
data rate
isEither
data
which
rate in
applied
value the
parameter
ratesof
transfers definition
the
8,
with
withouttwo
16,shows
a quality
32,
the
particular
the of that
64, the
signalling 128,
possible planned
target
with
uplink and values,
the
radio
data DPDCH Eb/N0s
maximum
bearer
rate kbps -6.3...0, step 0.1
of
the
you
The the
Eb/N0
to
applicable,SRB.
transferring select
selector of radio
then the DLbearer
DCH
the
parameters DCH"
value user of of
"Data the
define
data
the PS the
rates
actual
rate streaming
physical
8,gain 16, 32,
DCHs.
in
for
data
producing
which
DPDCH
when
of
gain.
RAB.
the
the
channel
64, the
rate
128,Thedownlink
are
data
Either data
in
data
and
defined
1-way
rate
datathe
of
the
rate
256
service
DCHs.with
the
receiver
3.4
definition
rate
the
rates two
kbps kbps.
gain gain specific
The
the
quality
(spreadingfor The
of
valuewhich
selector
management
isthe
diversity same
is
rate
applicable, is gain
planned
target defined
factors)
this
matching
parameter
assumed.
quality
values,
qualityfor
selector
then
Eb/N0s target
which the
parameter
for the
attributes.
defines
parameters
value of Eb/N0
for
the is
eachadded
of
"Primary
actual the
DPDCH to
UL
gain the
qualityDCH" value
spreading
parameter and
target of the
"Data
of
is factor
the
added rate rate
PS to gainthe -11...20 dB, step 0.1 dB
The
is
for
which
the
target value
used
the
separately
data are for
uplink
is for rate of
the
with
defined
used, the
DCHs.
gain theparameter
uplink is
separately and
The
management
with valid. the represents
downlink
selector
Ifmanagement
for the
the DCHs
parameter
parameter
value
uplink of the
and of low
theorthe the
matching
selector
whether
streaming
value of theEb/N0the
DCH"data
rate values
Eb/N0
rate
and
matching of
gain ofthe
"Secondary the
shall
Eb/N0 DL AMR DCH"
be value service.
applied
quality define
oftarget
the not.
of
data
SRB.
defines
"Data rate
parameters rate for valueeach
gain
"Primary without
DPDCH
for the the
Eb/N0
quality possible
spreading of
target the data
factor
PS rate
streaming -6.3...0, step 0.1
selector
downlink
The
If
thethe
data parameter
physical
PS value parameter
DCHs.
channel
streaming
service. of theis data shows
significant
selector
DCH", rates can
that with with
(spreading
parameter
be allof
assigned
the
modethe
shows PS
maximum
sets
factors)
to that
each of
gain.
whether
DCH".
streaming
DPDCH TheThe the
datadata
DCH"data
decision rate
rate rate
andthe gain
whether value
"Secondary
gain shall
is the isbe defined
data
applicable, applied
quality rate or the
gain
target
then not.
isof
of -6...0 dB, step 0.1 dB
the
for
the
of
The NB-AMR
which
data
the DCH
parameter the
rate userand
data
gain is the
datarate
shall WB-AMR.
gain
rates
significant be is
applied
8,with valid.
16, with
32,
the IfCS the
64, the value
128,
separately
If
thethe
applied
value PS value
of with
streaming
the with
of
a the
actual the management
selector
particular
DCH",
gain can parameter
physical
parameter be parameter
channel
assigned
is shows
added data
to tothat
each the
the
and selector
minimum
The parameter
256 kbps. parameter
downlink Ifdefines
a DPDCH
DCH shows
abe cell
user that
spreading
specific
data with
rate offset the
factor,
isthe forthen -6...0 dB, step 0.1 dB
transparent
"Data
the
rate
of
value data
the
maximum
the
is
value
rate
done
DCH
of rate
the and
gain
user
DPDCH
of
gain
with
rate
the
non-transparent
forthe
data the
shall
matching
actual data
Eb/N0
management
rates rate
service
applied
8,the
Eb/N0 of16, services.
the
gain
specific
with
32,
value PS
parameters
64,
is ofselected
streaming
gain and
the 128
with
DCH".
"Data
kbps. planned
minimum the The
Ifrateaparameter,
uplink
gain
DCH downlink
decision DPDCH
selector
user then
datarate
whether the matching
spreading
forrate the primary
the
isEb/N0 data
selected Eb/N0
quality
factor, rate
ofgain the gain
then
with target
UL theis -6...0 dB, step 0.1 dB
data
parameterservice.
applicable, then
is added the to value the of
value the actual
of the rate
values.
is
the
DCH"used
applied
value
parameter, for The
for
with of it;
uplink planned
a
the
then otherwise
particular
actual
and
the Eb/N0
"Data
primary the
physical
service ratedepends
secondary channel
specific
quality gain on
selector
target gainthe
quality data for
parameter
matching
channel is
Eb/N0
conditions,added value to
such the
of the as value service. of parameters
the rateis used Bit 0: SF 4, Bit 1: SF 8, Bit 2: SF 16, Bit 3: SF 32, Bit 4: SF
target
rate
parameter
the
for Eb/N0
it;
matching
is
isotherwise
done used. iswith
of
Eb/N0 added
thethe thesecondary
DL
value tomanagement
DCH" the
of the forpropagation
value of thetarget
downlink.
quality
signaling rate
The is
link. final
environment,
"Data rate gain multipath
selector conditions
for the Eb/N0 andof mobile
the UL 64, BitSF
Bit 0: 5: 4,
SFBit
128, Bit 8,
1: SF 6: Bit
SF 2:
256,
SF 16, Bit 3: SF 32, Bit 4: SF
matching
planned
used.
Parameter Eb/N0
primary
isparameter value
Eb/N0
significant of the
value
with service.
is obtained
all signaling by
link data
speed.
DCH" forThe
theuplink data and rate "Data quantifies
torate thegain theselector channel
value for 64, BitdB,
5: SF
adding
rates.
conditions defining
gain Eb/N0 of -6...0 step128,
0.1 Bit
dB 6: SF 256,
the Eb/N0
parameter. of the The DLan DCH" offset
resulting forvalue downlink.
Eb/No tovaluebe The added
is final to
the
Thisservice
planned
applied parameter specific
insecondary
producing defines rate
theamatching
Eb/N0 cell
value
service specificisEb/N0
specificobtained offset values.
rate for
by -6...0 dB, step 0.1 dB
The
adding radio
matching resource
theattributes.
data definesratemanagement
gain to the functionality
Eb/N0 valuefor of
This parameter a cell specific offset -6...0 dB, step 0.1 dB
uses the resulting
the parameter. TheEb/N0s resulting in the Eb/No downlink value is load
estimations
applied in producing and power thedefinitions.
service specific rate -6...6 dB, step 0.1 dB
matching attributes.
This parameter defines the planned Eb/N0 for the -11...20 dB, step 0.1 dB
E-DCH
This parameter MAC-d flow defines of the theCS plannedvoice service. Eb/N0 for E- -11...20 dB, step 0.1 dB
Parameter
DCHs with is
128 applicable
Kbps for
guaranteed both thebit AMR
rate which codec
This
sets parameter
(12.2), (12.2, defines7.95, the
5.9, planned
4.75)and(5.9, Eb/N0 for E-
4.75), -11...20 dB, step 0.1 dB
are
DCHs transferring
with 16 Kbpsradioguaranteed
bearers of bit therate PS streamingwhich
and
RABs. theThe AMR-WB parameter codec set (12.65,
is applied in the 8.85, 6.6).are
definition
transferring
Planned Eb/No radio bearers
value is usedof the with PS both streaming L1 BLER
of the load
RABs. The factor
parameter for the is E-DCH
applied streaming
in the definition RAB
targets
which is values
used indefined
admission with the
control management
and packet
of the load factor
parameters BLER fortarget
the E-DCH for radio the streaming
HS CS voice RAB E-
scheduling
which isms used algorithms
inBLER
admission of the control resource
and packet
TTI 10
management. and target for the HS CS voice
scheduling
E-TTI 2 ms.algorithms The radioofresource the radiomanagement resource
management.
functionality uses the Eb/N0 in the uplink load
Eb/N0
is assumed.
gain
This for the
value
parameter is The DCH
defined value
defineswhich of
separately
the transfers
the parameter
value ofthe
with thetheprotection
planned
class A
represents
management
Eb/N0 RAB
for the subflow
theparameter
DCHlow data of
whichrate the
"DataCSvalue
transfers NB-AMR
ratewithout speech
gainprotection
the for the
the
with the
possible
Eb/N0Aof
class codec
RABdata
the subflow set
rate
CS data". (12.2)
gain. of TheTheor
the CS set
data (12.2,
decision rate
NB-AMR 7.95,
gain
whether 5.9,
value
speech the
4.75).
is
with theOne-way
defined
data rate separately
gain
codec receiver
issetapplied
(5.9, with diversity
the amanagement
with
4.75). is assumed
particular
One-way physical
receiver to
be used.
parameter
channel The
data "Data management
rate rate
diversity is assumed to be used. Theis gain
done parameter
for
with the
the Eb/N0 "Quality
management of the
target
CS of the
data".
parameters
management The CS
"Data NB
decision
parameterrate AMR" gain defines
whether selector
"Quality the the
target forappropriate
data ofrate
the Eb/N0
the CS
value
This
gain
of the
NB AMR"of the
parameter
isULapplied
DCH" DCH
defines with quality
defines
forthe the
a particular
uplink target.
value
and "Data
appropriate The of
physical
value management
the
rate planned
channel
ofgain
the
parameter
Eb/N0
This
data
DCH rate
selector forfor
parameter
quality "Data
isthe done
the DCH
target. rate
defines
with
Eb/N0 which
The gain
ofthe
the for theDCH"
transfers
planned
management
the DL
management Eb/N0
theEb/N0for of the
protection
parameter for E- -11...20 dB, step 0.1 dB
CS
class
DCHs AMR"
A
parameters
downlink.
"Data RAB
with
rateThe defines
248subflow
"Data
gainfinal Kbps
for the
rate data
of
planned
the the
guaranteed
gain
Eb/N0 rate
CS gain
WB-AMR
selector
Eb/N0 bit
of thevalue value
CSrate
for the when
speech
which
Eb/N0
is for
AMR"
This parameter defines the planned Eb/N0 E- -11...20 dB, step 0.1 dB
the
with
are
of AMR
thethe
obtained
defines UL is
codec
transferring
DCH"
by
the 32 transferred
adding
data set
radio
for (12.65,
uplink
the
rateguaranteed with
bearers
dataand higher
8.85,
gain value when of 6.6).
the
"Data
rate data
gain PS
rateto
therate
One-way
streaming
gain
the AMRare is
DCHs
This with
parameter Kbpsdefines the planned bit rate
Eb/N0 which forgain
E- -11...20 dB, step 0.1 dB
services.
receiver
RABs.
selector
Eb/N0
transferredThe The
diversity
for
value ofdecision
parameter
the
with is
Eb/N0
the
higher assumedwhether
is
of
parameter. applied
datathe DL
rate the
toThe be
in
DCH" data
used.
the
resulting
services. rate
The
definition
for The
transferring
This
DCHs parameter
with radio
64isparameter
Kbps bearers
defines the
guaranteed of the
quality PS
bit streaming
target
rate for
which theare
is applied
management
of theparameter
downlink.
Eb/No load
value with
The factor aapplied
finalparticular
for the
planned physical
"Quality
E-DCH Eb/N0 channel
target
streaming
value ofisthe data
RAB CS
This
decision
RABs.
CS non The
transferring
whetherparameter
transparent
radio
defines
the data
bearers isin
data the producing
planned
rate
applied
service.
of the
gainin
PS The the
theEb/N0
is service
applied for
definition
same
streaming
E- -11...20 dB, step 0.1 dB
rate
which is
WB-AMR"
obtained
specific
DCHs
with a done
is used
by
rate
with
particular 8 with
defines in
adding
matching
Kbps thethe
admissionmanagement
the appropriate
data control
attributes.
guaranteed
physical rate
channel bit parameters
value
gain
The and
rate
data to
CS of
packet
the
which
rate non the
is are
of the
quality
Parameter
RABs. load
target
The factor
is the
defines
parameter for
used the E-DCH
for all
planned
is appliedstreaming
DCH data
Eb/N0
in the RAB
rates
for E-both
definition -11...20 dB, step 0.1 dB
"Data
DCH rate
quality
scheduling
Eb/N0
transparentvalue
transferring
done with gain
the target.
algorithms
of
data
radio selectorThe of
parameter.
service
bearers
management for
isof the
Management
the radio
the Eb/N0
The
transferred
PS
parameters resourceof
resulting the
parameter
with
streaming"Data CS UL
which
This
in the
DCHs
This
of the is
withused
parameter
uplink
parameter
load andin
guaranteed
factor admission
defines
the
defines
for E-DCH the
downlink
bit
the control
quality
rate
valuetransfer
over
streaming of and
target
248
the packet
for
directions.
Kbps
planned
RAB the
DCH"
"Data for
rate
management.
Eb/No
streaming
RABs. value
The uplink
gain
RAB. is and
for
applied
parameter the "Data Eb/N0
isin rate of
producing gain
the selector
CS
the AMR"
service for -11...20 dB, step 0.1 dB
rate
Eb/N0
which
gain
scheduling
CS
The CS are
isfor selector
transparent
non
usedthealgorithms data
transparent
transferring
DCH,
indefines
forwhich
admission
theof applied
service.
radio Eb/N0
the
data radio
The ofinsame
service
bearers
transfers
control
the
the
resource
ofCS
the
and
definition
isUL
the DCH"
quality
PSfinal
protection
packet
the
This
of
for Eb/N0
defines
specific
the the
rate
parameter
load
uplink andof the
data
matching
factor"Data DL
rate
for DCH"
gain
E-DCH
rate the for
value
attributes.
gain downlink.
value when
streamingThe
selectorof the theThe thethe is
AMR
planned
RAB
for
management.
target Bisfor
transferred
streaming
class
scheduling used
RAB with
RABs. for
subflow
algorithms CS all DCH
streaming
Parameterof the data is
CS rates
RAB.
applied
NB-AMR both in
inprotection
the
speech -6.3...0, step 0.1
planned
transferred
transparent
Eb/N0
which isof Eb/N0
used
thethe with
data
DLDCH,
in value
higher
service isof
which
admission
DCH" data
for
the
achieved
is radio
rate
transferred
transfers
control
downlink. byresource
services.adding
the
andThe with
packetThe
finalCSthe
uplink
with theand
definition
management.
data rate of
codec
gainthethe downlink
load
set
value factor
(12.2),
to thetransfer
for
(12.2,
Eb/N0 directions.
E-DCH
7.95,
value streaming
5.9,of The
4.75)
the
decision
conversational
class C RAB
scheduling
planned whether
Eb/N0 RAB.
subflow
algorithms the
value data
of
is the rate
ofachieved CS
thethe gain
radioNB-AMR
by is
resourceapplied
adding speechthe -11...20 dB, step 0.1 dB
CS
RAB
or transparent
(5.9,which
4.75). is used
The data inservice
value admission
of is transferred
control
Eb/N0 and with
parameter.
with a
theparticular
management.
data rate codec
gain The resulting
set
valuephysical
(12.2)or
to the Eb/No
channel
(12.2,
Eb/N0 dataisrate
value
7.95,
value applied
5.9,
of is
the4.75). -6.3...0, step 0.1
CS
in conversational
packet
expressed
producingscheduling
in therelation RAB.
algorithms
service to isthe of the
Eb/N0
specific rate radio
value matchingof the
done
The with
value
parameter. the
ofThe management
the Eb/N0
resulting parameters
expressed
Eb/No value in "Data
isrelation
appliedto
resource
protection
attributes.
rate gain management.
class
selector A subflow
for the DCH.
Eb/N0 The parameter DCH" is -11...20 dB, step 0.1 dB
the
in
This Eb/N0
producing
appliedparameter
for
value
thetheuplinkof the
service
defines and valueof
protection
specific
the downlink rate
ofthe
classthe ULAplanned
matching
DCHs.
subflow
The
for
DCH.uplink
The
attributes.
Eb/N0 and
for the "Data
parameter
DCH, rate
is the
which gain
applied selector
transfers for target
the
the for
uplinkthe
protection and -11...20 dB, step 0.1 dB
This
Eb/No
Eb/N0 parameter
value
of the is
DL defines
applied
DCH" in
for quality
producing
downlink. the
The for the
service
final
downlink
class
CS B
NB-AMR DCHs.
RAB subflow
speech The Eb/No
of the
service. value
CS WB-AMR
The by is
same applied in
speech
quality
specific rate -3...3 dB, step 0.1 dB
planned
producing
with
targettheis
Eb/N0
codec
used thematching
for
value
service
set (12.65,
all the
isattributes.
achieved
specific
AMR 8.85, rate
mode 6.6). adding
matching
The value the of
data rate
attributes.
the gain
Eb/N0 is expressed value to the Eb/N0
in uplink
relation value of
to the downlink the
Eb/N0 -3...3 dB, step 0.1 dB
configurations
parameter. The both in the
resulting Eb/No and
value isDCH.
applied
value
transfer
This of the protection
directions.
parameter defines class
the A subflow
quality target for the The -6.3...0, step 0.1
in producing
parameter is the
applied service for specific
the uplink rateand matching
downlink
CS WB-AMR speech service. The same quality
attributes. -11...20 dB, step 0.1 dB
DCHs.
target isThe used Eb/Nofor allvalue the AMR is applied
modein producing
the service specific rate matching attributes. -3...3 dB, step 0.1 dB
configurations both in the uplink and the downlink
transfer directions. -6.3...0, step 0.1
Management parameter defines the L1 HARQ 1...15, step 1
retransmissions
Management parameter thresholddefines for thethe outerloop
L1 HARQ power 1...15, step 1
control dedicated
retransmissions to the
threshold E-DCH MAC-d flow of
This
the CSparameter
voice whendefinesthe thefor
E-TTI
the
L1equals
BLER outerlooptarget
to 10
power
for Its
ms. -6.3...0, step 0.1
control
the dedicated to the of E-DCH MAC-d flow ofthe
ThisE-DCH
value
the CS isvoice
used
parameter MAC-d
when theflow
bydefines theouter thethe
E-TTI loop CS
L1equalspower
BLER voice when
control
target
to 2 ms. of
forIts -6.3...0, step 0.1
E-TTI
the
the RNC
E-DCHequals
for to
the
MAC-d 10 ms.
detection
flow It isof
of the used
theCS by
block
voicethe outer
error.
whenfor Block
the
value
This
loop is used
parameter
power bydefines
control theof outer the loop
initial power
SIR control
target of -8.2...17.3 dB, step 0.1 dB
error
E-TTI
the RNCisequals
occurred
for to
the 2 thethe
ifms.
detection number
It is RNC.
used
of the
E-HARQ
ofby the
blockthe outer
error. loop
Block
the UL DPCCH threshold
retransmission
retransmissions when
equals the to radio
for
the the link
valueblock haserror only for
This
power
error
DCHs
parameter
control
isconfigured
detection occurred
is
ofdefines
defined
the
ifinthe RNC.
the
with
the
number
uplink
the
initial
E-HARQ theoftarget
of SIR
transfer
management
the
direction
-8.2...17.3 dB, step 0.1 dB
parameter
the UL
retransmission
retransmissions or a HARQ
DPCCH thresholdwhen
equals failure
the to radio
for
the has
the link
value observed.
block has only for
error
This
and parameter
the
parameter
Outerloop
DCHs minimum
"HARQ
power
configured
defines
spreading
inthreshold
control
the
the initial
adjusts
uplink factor
for SIR
OLPC
the
transfer ofof ULthe
target
uplinkofDPDCH
HS CS
direction
-8.2...17.3 dB, step 0.1 dB
detection
parameter
the
is UL
128. is
DPCCH or
One-way defined
a HARQ
when with
receiver the the
failureradiomanagement
has
diversity link observed.
ishas only for
assumed.
voice
This
DPCCH
and the
parameter E-TTI
parameter
SIR
minimum10
"HARQ ms".
defines
target after
spreading
threshold the
the initial
occurred
factor SIR
fortransfer
OLPC of target
block
UL DPDCH
of HS CS -8.2...17.3 dB, step 0.1 dB
Outerloop
DCHs
HS-DPCCH
Value of thepower
configuredmust
parametercontrol
in
not thebe adjusts
uplink
configured
equals to the
thehasuplink
in direction
the
log10 radio
of the
the
is
voice
This UL
errors.
16. DPCCH
This
One-way
E-TTI
parameter 2 when
threshold
receiver
ms".
defines the
value radio
is
diversity
the initial link
used is
SIR when
assumed. only
target the forHS- -8.2...17.3 dB, step 0.1 dB
DPCCH
and
link.
BLER the SIR
minimum
value. target after
spreading the occurred
factor of block
UL DPDCH
DCHs
DPCCH
Value
the UL configured
target
of must
the
DPCCH has
not
parameter
whenin
been
be thethe uplink
defined
configured
equalsradio transfer
with
to in
linkthe the
the
has direction
radio
log10only oflink.
the
errors.
is 256. This
One-way thresholdreceiver value is used
diversity is when the
This
and parameter
the
management
BLER
DCHs minimum
value.
configured
defines
spreading
parameter
in the
theBLER
uplink
initial
factor SIR
target
transfer of assumed.
target
ULfor thefor
DPDCH
direction HS -8.2...17.3 dB, step 0.1 dB
HS-DPCCH
the UL target
DPCCH has
must been
whennot be
thedefined
configured
radio with
link the
in
has the
only radio
is
CS 32.
This voiceOne-way
parameterE-TTI receiver
10
definesms. diversity
the initial is
SIR assumed.
target HS-
and
link.
DCHs the
management minimum
configured spreading
parameter
in the BLER
uplink factor target
transfer of UL for thefor
DPDCH
direction HS -8.2...17.3 dB, step 0.1 dB
DPCCH
the
is UL
4.voice must
DPCCH
One-way notwhenbe configured
the radio in
link the
has radio
only for link.
CS
This
and parameter
the E-TTIreceiver
minimum 2 ms.
defines
spreading diversity
the initial
factor isSIRassumed.
of UL target
DPDCH HS- -8.2...17.3 dB, step 0.1 dB
DCHs
DPCCH
the UL configured
must not
DPCCH receiver in
be
when the the uplink
configuredradio transfer
in
link the
has direction
radio link.
only forHS-
is
and64.
This the One-way
parameter
minimum defines
spreading diversity
the initial
factor is
SIR assumed.
of target
UL DPDCH -8.2...17.3 dB, step 0.1 dB
DCHs
DPCCH
the UL configured
must
DPCCH notwhenin
be thethe uplink
in
link the
has direction
radio
only link.
is
and8. One-way
This the
parameter
minimum receiver
defines
spreading diversity
the initial
factor is assumed.
SIRof UL target
DPDCH HS-
for -8.2...17.3 dB, step 0.1 dB
DCHs
DPCCH
the UL configured
must
DPCCH notwhenin
be thethe uplink
in
link the
has direction
radio
only for link.
is
and128.
This the One-way
parameter
minimum receiver
defines
spreading the diversity
initial
factor is
SIRof assumed.
target
UL DPDCH -8.2...17.3 dB, step 0.1 dB
DCHs
HS-DPCCH
the UL configured
DPCCH must whenin
be thethe uplink
in
link the
has direction
radio
only link.
is
and16.
This the One-way
parameter
minimum receiver
defines
spreading diversity
the initial
factor is
SIR assumed.
of UL target
DPDCH forHS- -8.2...17.3 dB, step 0.1 dB
DCHs
DPCCH
the UL configured
must bewhen
DPCCH in the
configured
the uplink
radio transfer
in thelink radio
has direction
link.
only
is
and256.
This the One-way
parameter
minimum receiver
defines
spreading the diversity
initial
factor is
SIRof assumed.
target
UL DPDCH for -8.2...17.3 dB, step 0.1 dB
DCHs
HS-DPCCH
the UL configured
DPCCH must whenin the
be configured
the uplink
radio transfer
inisthe
link has direction
radio
only link.
is
and32.
This the One-way
parameter
minimum receiver
defines
spreading diversity
the initial
factor SIR assumed.
of UL target
DPDCH forHS- -8.2...17.3 dB, step 0.1 dB
DCHs
DPCCH
the configured
must be in the
configured uplink transfer
in the radio direction
link. HS-
is 4.UL
This
and
DPCCH
One-way
parameter
the minimum
when
receiver
defines the
spreading the radio
diversitymaximum
factor
link hasSIR
is assumed.
of UL
only target
DPDCH 0...10 dB, step 0.1 dB
DCHs
DPCCH
value configured
formust
the UL in
bereceiver
DPCCH the
configured uplink
when transfer
in the
the radio
radio direction
link.
link has
is
and64.
This the One-way
parameter
minimum defines
spreading diversity
the minimum
factor is assumed.
of SIR
UL DPDCHtarget HS- -10...0 dB, step 0.1 dB
only
DPCCH
value DCHs
formust
the configured
ULbe configured
DPCCH in the
when uplink
in the
the transfer
radio
radio link.
link has
is 8. One-way
This parameter
direction. The receiver
definesdiversity
maximum the initial ofisthe assumed.
SIR target HS-is
offset -6...6 dB, step 0.1 dB
only
DPCCH
for theDCHs must
UL configured
outer be configured
loop in value
power thecontrol
uplink
in the radio
when
SIR
transfer target
link.
the
achieved
This parameter
direction. by
Theadding defines
minimum the the value
value of
of the
initial SIRparameter
the SIR target
target to
offset
is -6...0 dB, step 0.1 dB
radio
the
value link
initial
for has
SIR
the ULonly
target
DPCCHDCHs
value. configured
when the in the
radio link uplink
has
achieved
This parameter
transfer by adding
direction. defines the
If theinthe value
initial of
initial
SIRSIRthe parameter
target target
value to
offset
is -6...0 dB, step 0.1 dB
only
the
value DCHs
initial
for SIR
the configured
ULtarget
DPCCH value. the
when uplink
the transfer
radio link has
sent to
direction theandBTS and to
the 2-wayinreceiverthe outer loop
diversity power is
only DCHs
controller of configured
the RNC, the thevalueuplink of thetransfer
parameter
assumed.
direction Experienced
and the SIR
4-way receiver depends diversity also on the
is addedconditions,
channel to the produced such initial
as SIR
propagation target isvalue.
assumed. Experienced SIR depends also on the
environment,
channel conditions, multipath such conditions
as propagation and mobile
speed. Besides the receiver
environment, multipath conditions, and diversity gain,
mobile the
parameter quantifies also
speed. Besides the receiver diversity gain, the the channel conditions
defining an offset value for the SIR target.
This parameter defines the origin of the last Not defined (0), Network originated configuration action (1),
configuration action affecting the object. NetAct RNW plan originated configuration action (2),
WRAB_ID2 - Special Events O2
UK Value
Not applicable Not applicable 2

0.7 dB 0.7 dB 0.7 dB
0.7 dB 0.7 dB 0.7 dB
1.5 dB 1.5 dB 1.5 dB
1.5 dB 1.5 dB 1.5 dB
0.5 0.5 0.5
8 dB 8 dB 8 dB
-2 -2 -2
6.5 dB 6.5 dB 6.5 dB
-1.3 -1.3 -1.3
127 127 127
127 127 127
8 dB 8 dB 8 dB
-2 dB -2 dB -2 dB
6.5 dB 6.5 dB 6.5 dB
-1.3 -1.3 -1.3
63 63 63
31 31 31
8 dB 8 dB 8 dB
-2 -2 -2
8 dB 8 dB 10dB
-2 -2 -2
-0.5 dB -0.5 dB -0.5 dB
-2 -2 -2
-2 -2 -2
15 15 15
7 7 7
-0.5 dB -0.5 dB -0.5 dB
-3 dB -3 dB -3 dB
-4 dB -4 dB -4 dB
0 dB 0 dB 0 dB
4 dB 4 dB 4 dB
6 dB 6 dB 6 dB
7.5 dB 7.5 dB 7.5 dB
5.5 dB 5.5 dB 5.5 dB
7 dB 7 dB 7 dB
6.5 dB 6.5 dB 6.5 dB
8 dB 8 dB 8 dB
5 dB 5 dB 5 dB
8 dB 8 dB 8 dB
-2.7 -2.7 -2.7
8 8 8
-2.7 -2.7 -2.7
8 dB 8 dB 8 dB
8 dB 8 dB 8 dB
-0.5 dB -0.5 dB -0.5 dB
-1 dB -1 dB -1 dB
-2 -2 -2
8 8 8
-0.5 -0.5 -0.5
-2 -2 -2
1 1 1
2 2 2
-1 -1 -1
-1 -1 -1
4.5 dB 4.5 dB 4.5 dB
7.5 dB 7.5 dB 7.5 dB
4.5 dB 4.5 dB 4.5 dB
6 dB 6 dB 6 dB
9 dB 9 dB 9 dB
4.5 dB 4.5 dB 4.5 dB
8 dB 8 dB 8 dB
7.5 dB 7.5 dB 4.5 dB
10.5 dB 10.5 dB 7.5 dB
7.5 dB 7.5 dB 4.5 dB
9 dB 9 dB 6 dB
12 dB 12 dB 9 dB
7.5 dB 7.5 dB 4.5 dB
11 dB 11 dB 8 dB
6 dB 6 dB 6 dB
-6 dB -6 dB -6 dB
0 dB 0 dB -2 dB
-3 dB -3 dB -3 dB
-4 dB -4 dB -4 dB
WRAB_ID5 - New Default O2 UK O2 UK Range for
Value (March 2011) Optimisation
5
0.7 dB NWP
0.7 dB NWP
0.7 dB NWP
0.7 dB NWP
0.7 dB NWP
0.7 dB NWP
0.7 dB NWP
0.7 dB NWP
0.7 dB NWP
0.7 dB NWP
0.7 dB NWP
0.7 dB NWP
0.7 dB NWP
0.7 dB NWP
0.7 dB NWP
0.7 dB NWP
0.7 dB NWP
0.7 dB NWP
0.7 dB NWP
0.7 dB TN159 v9 recommendatiNWP
0.7 dB NWP
0.7 dB NWP
0.7 dB NWP
0.7 dB NWP
0.7 dB Aligns RU10 CS and PS NWP
0.7 dB Aligns RU10 CS and PS NWP
0.7 dB NWP
0.7 dB NWP
0.7 dB NWP
0.7 dB NWP
0.7 dB NWP
0.7 dB NWP
0.7 dB NWP
0.7 dB NWP
0.7 dB NWP
0.7 dB NWP
0.7 dB NWP
0.7 dB NWP
0.7 dB NWP
0.7 dB NWP
0.7 dB NWP
0.7 dB NWP
0.7 dB NWP
0.7 dB NWP
0.7 dB NWP
0.7 dB NWP
0.7 dB NWP
0.7 dB NWP
0.7 dB NWP
0.7 dB NWP
0.7 dB NWP
0.7 dB NWP
0.7 dB NWP
0.7 dB NWP
0.7 dB NWP
0.7 dB NWP
0.7 dB NWP
0.7 dB NWP
0.7 dB NWP
0.7 dB NWP
0.7 dB NWP
0.7 dB NWP
0.7 dB NWP
0.7 dB NWP
0.7 dB NWP
0.7 dB NWP
0.7 dB NWP
0.7 dB NWP
0.7 dB NWP
0.7 dB NWP
0.7 dB NWP
0.7 dB NWP
0.7 dB NWP
Not applicable NWP
Frequency



New in RU10
RU20 on TOP
RU20 on TOP
RU20 on TOP
RU20 on TOP
RU20 on TOP
Issue in Which Parameter Added
or Last Changed
5.8
5.8
9.0
9.0
5.9
5.9
5.9
5.9
5.9
5.9
5.9
5.9
5.9
RNC Measurement Threshold Rules
RULE Comments Netac

Threshold
1001
Associated Alarm(s)
71007 No RRC
Attempts
Further Info
Requested by ATS
Dec 2008
1
Netact Screenshots for Setup
Enabled RRM & Telecom Features
Feature ID Feature Name
RAN1.5010 Inter-Frequency Handover
RAN1.5009 WCDMA - GSM Inter-System Handover
RAN1.5008 GSM - WCDMA Inter-System Handover
RAN419 SRNS Relocation
RAN1.028 Resource Manager Algorithm
RAN1.027 Admission Control Algorithm
RAN1.029 Packet Scheduler Algorithm
RAN1.025 Power Control Algorithm
RAN1.026 Load Control Algorithm
RAN1.024 Soft Handovers
RAN866 Dynamic Link Optimization for NRT Traffic Coverage
RAN919 Decrease of the Retried NRT DCH Bit Rate
RAN1124 Paging Channel State (Cell_PCH)
RAN1.007 RAN Procedures for the Idle UEs
RAN1.008 RAN - UE Connection Establishment
RAN1.009 Management of the Connected Mode UE
RAN1.010 Radio Access Bearer Establishment and Release
RAN1.012 Radio Link Allocation for Real-Time Radio Access Bearer Services
RAN1.011 UE Location Management with Handover Procedures
RAN1.015 Packet Data Transfer States
RAN1.020 Encryption and Integrity Protection
RAN1.022 Packet Data Handling on Iu
RAN1.013 Layer 2 for the Real-Time Radio Access Bearers
RAN1.016 Layer 2 for the Non-Real-Time Radio Access Bearers
RAN1.014 Macro Diversity Combining and Splitting
RAN1.017 Transport Channels and Physical Channels
RAN1.018 Transport Channel Coding and Multiplexing
RAN1.019 Spreading and Modulation
RAN1.021 BTS Logical Resource Management
RAN2.0060 IMSI Based Handover
RAN920 Selective NRT DCH Data Rate Set
RAN2.0079 Directed RRC Connection Setup
RAN2.0105 Inter-RNC Intra-Frequency Hard Handover
RAN2.0107 RRC Connection Re-establishment
RAN474 Multi-RAB: AMR + 3 PS data
RAN475 Multi-RAB: CS data + PS data
RAN2.0051 Streaming Packet Switched Quality of Service
RAN2.0041 LCS - Cell Coverage Based (RTT) with Geographical Coordinates
RAN384 Directed Emergency Call Inter-System Handover for US
RAN2.0023 Service Area Broadcast
RAN2.0042 Nokia Multi-Operator RAN
RAN2.0022 Support for Volume Based Charging
RAN395 Enhanced Priority Based Scheduling and Overload Control for NRT Traffic
RAN964 Directed RRC Connection Setup for HSDPA Layer
RAN821 HSDPA Resource Allocation
RAN235 HSDPA Channel Switching
RAN233 HSDPA Associated Uplink DPCH Scheduling
RAN1148 HSDPA Cell Reselection
RAN230 HSDPA Mobility Handling with DCH Switching
RAN763 Basic HSDPA with QPSK and 5 Codes
RAN764 HSDPA 16QAM Support
RAN869 HSDPA BTS Packet Scheduler
RAN871 HSDPA Flow Control
RAN766 HSDPA Shared Control Channel Power Control
RAN140 Load and Service Based IS/IF Handover
RAN1195 Multi-band Support for RNC
RAN242 Flexible Upgrade of NRT DCH Data Rate
RAN409 Throughput Based Optimisation of the Packet Scheduler Algorithm
RAN1180 Wireless Priority Service
RAN146 Power Balancing
RAN830 AMR Codec Sets (12.2, 7.95, 5.90, 4.75) and (5.90, 4.75)
RAN1224 HSDPA Dynamic Power Allocation
RAN829 HSDPA Soft/softer Handover for Associated DPCH
RAN828 HSDPA Serving Cell Change
RAN827 HSDPA with Simultaneous AMR Voice Call
RAN849 HSDPA Proportional Fair Resource Packet Scheduler
RAN839 HSDPA 16 Users per Cell
RAN223 UE Based A-GPS Using External Reference Network
RAN875 Network Based A-GPS Using External Reference Network
RAN815 Point-to-Point Iu-PC Interface
RAN814 Intelligent Directed Emergency Call Inter-system Handover for US
RAN1184 Configurable Location Shapes
RAN134 Support for Tandem/Transcoder Free Operation
RAN1164 HSDPA Service Indicator
RAN928 Directed Retry
RAN831 Wideband AMR Codec Set (12.65, 8.85, 6.6)
RAN1013 16 kbit/s Return Channel DCH Data Rate Support for HSDPA
RAN312 HSDPA Dynamic Resource Allocation
RAN974 HSUPA with Simultaneous AMR Voice Call
RAN1515 HSPA Inter-RNC Cell Change
RAN1011 HSPA Layering for UEs in Common Channels
RAN973 HSUPA Basic RRM
RAN970 HSUPA Handovers
RAN1727 Enhancement to HSDPA with Simultaneous AMR Voice Call
RAN852 HSDPA 15 Codes
RAN853 HSDPA Code Multiplexing
RAN1034 Shared HSDPA Scheduler for Baseband Efficiency
RAN826 Basic HSUPA
RAN1249 HSDPA 10 Mbps per User
RAN834 Flexible Iu
RAN1177 Emergency Call Redirect to GSM
RAN1452 MORAN for up to 4 Operators
RAN1602 Flexible Iu with Multi-Operator RAN
RAN968 HSUPA BTS Packet Scheduler
RAN992 HSUPA Congestion Control
RAN1305 HSDPA 14.4 Mbps per Cell
RAN1219 Latency Statistics for UE Positioning
RAN1183 UTRAN-GAN Interworking
RAN1266 Soft Handover Based on Detected Set Reporting
RAN1824 Inter-frequency Handover over Iur
RAN1276 HSDPA Inter-frequency Handover
RAN1596 HSPA Capability Based Handover
RAN1465 HSUPA 60 Users per BTS
RAN1262 QoS Aware HSPA Scheduling
RAN1004 Streaming QoS for HSPA
RAN285 HSPA Multi NRT RABs
RAN930 PS RAB Reconfiguration
RAN1759 Support for I-HSPA Sharing and Iur Mobility Enhancements
RAN1797 Common Channel Setup
RAN2122 HSUPA Pre-emption Light
RAN1138 Cell Selection Parameter Set
RAN1275 Inter-system Handover Cancellation
RAN1323 Extension of SIB11 (SIB11bis)
RAN580 Load Based AMR Codec Mode Selection
RAN2203 Preventing Video Call in Selected Cells
RAN1258 HSDPA 14 Mbps per User
RAN1110 HSDPA Congestion Control
RAN966 Multi-Operator Core Network
RAN1187 SAS-Centric Iupc
RAN1185 LCS Support in Drift RNC
RAN1296 LCS Periodical Reporting
RAN1640 LCS Shape Conversion
RAN1920 Iu-PC SCTP Association Priority
RAN1730 RRC Re-establishment for Real Time Services
RAN833 PS UE States: URA_PCH
RAN1244 Spectral Efficient Link Adaptation for HSDPA
RAN1758 Multiple BSIC Identification
RAN2067 LTE Interworking
RAN2176 LTE PS Handover
RAN2289 Blind IFHO in RAB Setup Phase
RAN1202 24 kbps Paging Channel
RAN1689 CS Voice Over HSPA
RAN1642 MIMO
RAN1643 HSDPA 64QAM
RAN1906 Dual-Cell HSDPA 42Mbps
RAN1231 HSPA over Iur
RAN1470 HSUPA 2 ms TTI
RAN1322 Fast L1 Syncronisation
RAN1762 Direct Resource Allocation for HSPA
RAN1638 Flexible RLC (DL)
RAN1686 HSPA 72 Users Per Cell
RAN2136 Fast Dormancy
RAN1201 Fractional DPCH
RAN876 Broadcast of A-GPS Assistance Data
RAN2746 Fast HSPA Mobility
RAN2886 Faster OLPC
RAN1702 Frequency Domain Equalizer
RAN1637 High Speed Cell_FACH DL
RAN1308 HSUPA Interference Cancellation Receiver
RAN2412 Inter Circle Roaming
RAN2596 Inter Circle Roaming for HSDPA
RAN2879 Mass Event Handler
RAN1912 MIMO 42Mbps
RAN2172 Multi-Band Load Balancing
RAN2704 3GPP Rel8 CBS ETWS Support
RAN2831 AMR with DCH(0,0) Support on Iur
RAN2509 Application Aware RAN
RAN2480 Automatic Access Class Restriction
RAN1907 DC-HSDPA with MIMO 84Mbps
RAN2302 Dynamic HSUPA BLER
RAN2494 Fast Cell_PCH Switching
RAN2451 Fast Dormancy Profiling
RAN2581 Femto Handover Control
RAN1910 Flexible RLC in UL
RAN1913 High Speed Cell_FACH
RAN2124 HSPA 128 Users per Cell
RAN1645 HSUPA 16QAM
RAN971 HSUPA Downlink Physical Channel Power Control
RAN2135 Layering in RRC Connection Release
RAN2527 SAB Support with 2 SCCPCHs
RAN2717 Smart LTE Layering
RAN2435 SRVCC from LTE and CSFB with HO
RAN1908 UE DRX in Cell_FACH
RAN2954 Voice Call Priorization during High Traffic Load
RAN2963 Data Session Profiling
RAN2179 Dual Band HSDPA 42 Mbps
RAN2482 Enhanced Virtual Antenna Mapping
RAN1668 HSUPA Compressed Mode for LTE and Inter-frequency Handover
RAN2980 Measurement Based LTE Layering
RAN147 RRC Connection Setup Redirection
RAN3069 RSRQ-based LTE Reselection
RAN2264 Smart LTE Handover
RAN2881 WCDMA and GSM Layer Priorities
RAN2578 AMR Codec Set for 2G-3G TrFO
RAN3018 BTS Load Based AACR
RAN1905 DC-HSUPA
RAN2250 Enhanced HSUPA IC
RAN2510 In-bearer Application Optimization
RAN2546 VHS Receiver for High Speed Train
RAN2211 Multi-Cell HSDPA (trial)
Enabled in Part
Feature category RU release BSW/ASW
Or Full
RRM & Telecom RAN 1.5.2 ED2 ASW Enabled
RRM & Telecom RAN 1.5.2 ED2 ASW Disabled
RRM & Telecom RAN 1.5.2 ED2 BSW Enabled
RRM & Telecom RAN 1.5.2 ED2 BSW Disabled
RRM & Telecom RAN04 ASW Disabled
RRM & Telecom RAN04 ASW Enabled
RRM & Telecom RAN04 BSW Enabled
RRM & Telecom RAN04 BSW Enabled
RRM & Telecom RAN04 BSW Disabled
RRM & Telecom RAS05 ASW Enabled
RRM & Telecom RAS05 BSW Enabled
RRM & Telecom RAS05 CD ASW Enabled
RRM & Telecom RAS05.1 ASW Disabled
RRM & Telecom RAS05.1 ED ASW Enabled
RRM & Telecom RAS05.1 ASW Enabled
RRM & Telecom RAS05.1 ED ASW Disabled
RRM & Telecom RAS05.1 BSW Enabled
RRM & Telecom RAS06 On Top ASW Disabled
RRM & Telecom RAS06 On Top BSW Enabled
RRM & Telecom RAS06 ASW Disabled
RRM & Telecom RAS06 ASW Disabled
RRM & Telecom RAS06 On Top ASW Disabled
RRM & Telecom RAS06 BSW Disabled
RRM & Telecom RU10 ASW Disabled
RRM & Telecom RU10 ASW Enabled
RRM & Telecom RU10 On Top ASW Enabled
RRM & Telecom RU10 BSW Disabled
RRM & Telecom RU10 BSW Enabled
RRM & Telecom RU10 On Top BSW Disabled
RRM & Telecom RU20 On Top ASW Disabled
RRM & Telecom RU20 On Top ASW Disabled
RRM & Telecom RU20 On Top BSW Enabled
RRM & Telecom RU50 EP1 ASW Disabled
Comments
Beacon only.
Beacon for VF only.
Beacon for VF only.
Design ongoing with core network team
Beacon only.
Not applicable
Selected Beacon Iur only.
Selected special event designs only.
Selected sites. See WCEL comments.

Nokia 3G Performance Measurements
- This worksheet has been reformatted from Issue 8.9
- All RNCs are now RNC2600 variant.
- Beacon and Legacy network monitoring capabilities are aligned.
- Measurements previously detailed as being enabled on IP Iub or IP Iu-CS RNCs are now enabled everywhere.
Status Category Measurement ID

Enabled on all RNCs ATM Transport M530
Enabled on all RNCs IP Transport M564
Enabled on all RNCs Radio M1000
Enabled on all RNCs RNC M592
Enabled on selected RNCs only (Contact
Radio M1028
[email protected])
Disabled - Evaluate in RU50 EP1 ATM Transport M5111
Disabled - Evaluate in RU50 EP1 ATM Transport M5112
Disabled - Evaluate in RU50 EP1 Radio M5011
Disabled - Evaluate in RU50 EP1 Radio M5012
Disabled - Evaluate in RU50 EP1 Transport M5141
Disabled ATM Transport M5106
Disabled IP Transport M5122
Disabled Radio M1011
Disabled RNC M145
Disabled RNC M2002
Disabled RNC M2004
Disabled RNC M2007
Disabled RNC M208
Disabled RNC M209
Disabled RNC M210
Disabled RNC M211
Disabled RNC M212
Disabled RNC M213
Disabled RNC M214
Disabled RNC M215
Disabled RNC M216
Disabled RNC M217
Disabled RNC M218
Disabled RNC M219
Disabled RNC M513
Disabled RNC M514
Disabled RNC M516
Disabled RNC M563
Disabled RNC M594
Disabled RNC M608
Disabled RNC M610
Disabled RNC M801
u-CS RNCs are now enabled everywhere.
Hour begin
0 1 2 3 4 5 6 7 8
Measurement Set Source
ATM Virtual Channel Connection RNC
AAL2 Path CAC Resource RNC
AAL2 Scheduling Performace in RNC RNC
AAL2 Resource Reservation Measurement RNC
Ethhernet Interface Resource Measurement RNC
IP measurement on IP interface RNC
UDP measurement on IP interface RNC
IP QoS RNC
IP Based Route Measurement RNC
M3UA Association Set Measurement RNC
RNC RTP/RTCP RNC
RNC IP CAC RNC
Cell Resource RNC
Service Level WCEL
Traffic WCEL
L3Iu RNC
L3Iur WCEL
L3Iub WCEL
RRC Signalling WCEL
Soft Handover WCEL
Intra System Hard Handover WCEL
L3Reloc RNC
Inter System Hard Handover WCEL
AutoDef Soft Handover RNC
AutoDef Inter Frequency HHO RNC
AutoDef Inter Frequency HHO RNC
Packet Call Counters WCEL
Cell Throughput WCEL
RCPM OLPC RNC RNC
RCPM RLC WCEL WCEL
RCPM RLC RNC RNC
WBTS Resource WBTS
CPICH Quality WCEL
HSDPA in WBTS WCEL
WBTS HW Resource WBTS
Cell Throughput in WBTS WCEL
Frame Protocol in WBTS WCEL
Signalling Load in WBTS WCEL
WBTS R99 Hardware LCG
WBTS Level Monitoring Measurement WBTS
IP TWAMP Statistics RNC
FTM Ethernet Link WBTS
FTM VLAN PHB Statistics WBTS
FTM VLAN IP Statistics WBTS
FTM VLAN Statistics WBTS
FTM TWAMP Statistics WBTS
FTM L2 Switch Statistics WBTS
FTM IP Filtering WBTS
Unit Load Measurement RNC
WAC overload control RNC
DSP Service Statistics Measurement RNC
DSP State Changes Measurement RNC
DSP Resource Utilization Measurement RNC
DSP Load Measurement RNC
M3UA Association Set Measurement RNC
RNC Capacity Usage Measurement RNC
Autodef SHO DSR RNC

VC Bandwidth Utilisation Statistics Measurement WBTS
VCC Bundle Bandwidth Utilisation Statistics Measurement WBTS
HSPA Scheduler Monitoring WBTS
FSM Level Monitoring WBTS
Service OAM Frame Loss Statistics WBTS
Service OAM Two Way Delay Statistics WBTS
Service OAM One Way Delay Variation Statistics WBTS
FTM Ethernet Interface WBTS
FTM ATM VC Connection Measurement WBTS
FTM ATM VP Connection Measurement WBTS
ATM layer performance RNC
ATM virtual path connection RNC
ATM route load RNC
ATM interface RNC
SAAL signalling protocol at UNI RNC
AAL5 protocol measurement in DMX RNC
AAL2 signalling protocol at UNI RNC
AAL5 protocol measurement in Chorus RNC
AAL2 signalling at NNI RNC
FTM IPSec WBTS
FTM STP Statistics WBTS
FTM TOP FreqSync Statistics WBTS
PPP Multi Link IP Statistics WBTS
PPP Single Link IP Statistics WBTS
PPP Multi Link PHB Statistics WBTS
PPP Single Link PHB Statistics WBTS
FTM IP Security WBTS
FTM Security Policy Statistics WBTS
Location Services RNC
Service Area Broadcast RNC
RCPM OLPC WCEL
RCPM RLC WCEL
RCPM UEQ WCEL
Autodef LTE RNC
Iu-PC Interface RNC
RCPM OLPC WCEL WCEL
CS Voice HSPA User Plane WCEL
Operator Statistics in RNC WCEL
DSCP Stats RNC
LTE Relocation RNC
Operator Specific Statistics WCEL
FTM PDH Interface Measurement WBTS
FTM SDH Interface Measurement WBTS
FTM ATM Interface Measurement WBTS
FTM Pseudowire MPLS WBTS
FTM PSN Tunnel IP WBTS
AAL2 Scheduling Performance in BTS WBTS
FTM Timing over Packet WBTS
FTM IP Statistics WBTS
FTM PHB Statistics WBTS
FTM CESoPSN Interface WBTS
FTM CES over PSN pseudowire tunnel WBTS
FTM CES over PSN Pseudowire WBTS
PPP Mult Llink Statistics WBTS
PPP Single Link Statistics WBTS
PDH interface statistics permanent measurement RNC
CPU Usage Core Level RNC
Networking Logical RNC
CPU Usage Node Level RNC
MTP signalling link availability RNC
MTP signalling link performance RNC
MTP signalling link utilization RNC
MTP signalling point status RNC
MTP signalling set and route set availability RNC
MTP signalling traffic report of signalling RNC
MTP signalling traffic report of user parts RNC
MTP matrix signalling traffic RNC
SCCP signalling point RNC
SCCP subsystem RNC
SCCP local subsystem availability RNC
SCCP single meters' RNC
STM-1 interface RNC
IMA logical interface RNC
SONET/SDH protection group RNC
TCP/IP protocol RNC
WAC overload control RNC
Availability performance RNC
Logical Resource Usage RNC
Iu-PS Performance RNC
Hour beginning
NetAct Enabled Enabled Enabled
9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
Granularity in Live in I&T via
60 mins Yes Yes MML
60 mins Yes Yes MML
60 mins Yes MML
60 mins Yes Yes MML
60 mins Yes MML
60 mins Yes Yes MML
60 mins Yes Yes MML
60 mins Yes Yes MML
60 mins Yes MML
60 mins Yes MML
60 mins Yes Yes MML
60 mins Yes MML
60 mins Yes Yes NetAct
60 mins Yes Yes MML
60 mins Yes Yes MML
Yes MML
60 mins Yes Yes MML
60 mins Yes Yes MML
60 mins Yes Yes MML
60 mins Yes Yes MML
60 mins Yes MML
Yes MML

NetAct
NetAct
NetAct
NetAct
NetAct
NetAct
NetAct
NetAct
NetAct
NetAct
MML
MML
MML
MML
MML
MML
MML
MML
MML
NetAct
NetAct
NetAct
NetAct
NetAct
NetAct
NetAct
NetAct
NetAct
NetAct
NetAct
NetAct
NetAct
NetAct
NetAct
NetAct
NetAct
NetAct
NetAct
NetAct
NetAct
NetAct
NetAct
NetAct
NetAct
NetAct
NetAct
NetAct
NetAct
NetAct
NetAct
NetAct
NetAct
NetAct
NetAct
NetAct
MML
sCLI
sCLI
sCLI
MML
MML
MML
MML
MML
MML
MML
MML
MML
MML
MML
MML
MML
MML
MML
MML
MML
MML
MML
MML
Notes
RU20 FiFile Checksum
O2 Live FIFILE
description FiFile O2 Live Network
Documents BDC14157
N/A Feature Sales Item ID Fifile Actual Description Additional Notes Comments: Network
RAN1.5008 & RAN1.5009 RAN.003 003_INTER_SYSTEM_HANDOVER Y
RAN474 & Multi-RAB Package
RAN.004 Y
RAN475 Not Visible in FiFile Desc Doc
Document
Document
395_ENHANCED_PRIORITY_BASED_SCHEDULI
RAN395 RAN395 Y
NG
RAN224 &
RAN773 & RAN009 009_ATM_MEASUREMENTS Y
RAN1163
1131_ALTERNATIVE_AAL2_ROUTING_FOR_IU_C
RAN1131 RAN1131 Y
S
RAN190 010_RADIO_CONNECTION_PERFORMANCE_MA
RAN.010 Y
RAN953 NAGEMENT
RAN140 RAN140 Y
140_LOAD_AND_SERVICE_BASED_HANDOVER
RAN242 RAN242 242_FLEXIBLE_UPGR_OF_NRT_DCH_DR Y
RAN409 RAN409 409_THRO_BASED_OPT_OF_PACKET_SA Y
801_RADIO_NETWORK_ACC_REGULATION_FU
Y
NC
Licence Fee for 3rd Party MHA Support
RAN639 RAS00121 Y
Not Visible in FiFile Desc Doc
RAN1191 (RU10)
RAN1189 (RU10-FiFile) RU00259 Detected Set Reporting and Measurements Y
RAN1245 (RU10-FiFile)
RAN831 RAN831 831_WIDEBAND_AMR_CODEC_SET Y
TEF O2 USED IN
Class Class_Name Identifier Name Value Modify TEF O2
0 ANNOUNCEMENT_DEVICE 24 ANN_DEF_NBR_OF_CYCLES 0001H YES
2 SYSTEM_FUNCT_CONFIGUR 9 DPABX_CHARGING 0000H NO
2 SYSTEM_FUNCT_CONFIGUR 35 PRIMARY_RATE_INTERFACE 0000H NO
2 SYSTEM_FUNCT_CONFIGUR 62 CIWF_MODE 0000H YES
2 SYSTEM_FUNCT_CONFIGUR 115 FREE_CIC_NUMBERING 0000H YES
2 SYSTEM_FUNCT_CONFIGUR 188 T1_ENVIRONMENT 0000H YES
2 SYSTEM_FUNCT_CONFIGUR 241 Q3_DX_ALARMS_FORW_ON 0001H YES NO
2 SYSTEM_FUNCT_CONFIGUR 266 ANALYSIS_MAX_COUNT 0064H NO
2 SYSTEM_FUNCT_CONFIGUR 289 SSF_FUNCTION_ON 00FFH YES
2 SYSTEM_FUNCT_CONFIGUR 361 NORTH_AMERICAN_NUMBER 0000H YES
2 SYSTEM_FUNCT_CONFIGUR 366 NOKIA_ACM_SUPPORT 0000H YES
2 SYSTEM_FUNCT_CONFIGUR 461 BIN_HEADER_TYPE 0000H YES
2 SYSTEM_FUNCT_CONFIGUR 603 NE_CONFIG_REDUNDANT 0000H YES
2 SYSTEM_FUNCT_CONFIGUR 621 RNW_DATA_1 FF00H YES NO
2 SYSTEM_FUNCT_CONFIGUR 629 TRUNK_INTERFACE_TYPES 0007H NO
2 SYSTEM_FUNCT_CONFIGUR 671 IMA_GRP_DIFF_DELAY_MAX 0019H YES
2 SYSTEM_FUNCT_CONFIGUR 693 FIRST_FREE_NUMBERED_CGR 0001H YES
2 SYSTEM_FUNCT_CONFIGUR 711 NEMU_IS_PRESENT 0000H YES
2 SYSTEM_FUNCT_CONFIGUR 740 RNW_DATA_2 FF00H YES NO
2 SYSTEM_FUNCT_CONFIGUR 757 USE_OF_TTY 0000H YES
2 SYSTEM_FUNCT_CONFIGUR 775 PCM_ENCODING_LAW 0000H YES
2 SYSTEM_FUNCT_CONFIGUR 817 DSCP_FOR_USER_PLANE 002EH YES
2 SYSTEM_FUNCT_CONFIGUR 840 TIMER_ERQ 001EH YES
2 SYSTEM_FUNCT_CONFIGUR 841 TIMER_REL 003CH YES
2 SYSTEM_FUNCT_CONFIGUR 842 TIMER_MOD 000AH YES
2 SYSTEM_FUNCT_CONFIGUR 860 US_WPS_EXEMPTIONS 0000H YES
2 SYSTEM_FUNCT_CONFIGUR 921 HW_CHANGE_NOTIF_IN_USE 0000H YES
2 SYSTEM_FUNCT_CONFIGUR 946 AAL2_CAC_STAT_SAMP_PER 0001H YES
2 SYSTEM_FUNCT_CONFIGUR 950 RTCP_FOR_UP_MONITORING 0003H YES
2 SYSTEM_FUNCT_CONFIGUR 972 CAC_PATH_ALARM_SET 0064H YES
2 SYSTEM_FUNCT_CONFIGUR 973 CAC_PATH_ALARM_RESET 0032H YES
2 SYSTEM_FUNCT_CONFIGUR 974 CAC_A2SP_ALARM_SET 0032H YES
2 SYSTEM_FUNCT_CONFIGUR 975 CAC_A2SP_ALARM_RESET 0019H YES
2 SYSTEM_FUNCT_CONFIGUR 976 CAC_PATH_CHECK_PER 000FH YES
2 SYSTEM_FUNCT_CONFIGUR 977 CAC_A2SP_CHECK_PER 0003H YES
2 SYSTEM_FUNCT_CONFIGUR 1047 AAL2_NNI_CONN_REL_TIMER 0000H YES YES
2 SYSTEM_FUNCT_CONFIGUR 1120 LAN_ADMINISTRATION 0001H YES
2 SYSTEM_FUNCT_CONFIGUR 1188 MIN_RTP_PORT 0402H YES
2 SYSTEM_FUNCT_CONFIGUR 1196 CONGEST_IND_RESO 0005H YES
2 SYSTEM_FUNCT_CONFIGUR 1197 CONGEST_ALARM_LIMIT 0032H YES
2 SYSTEM_FUNCT_CONFIGUR 1233 AUTOMATIC_HW_CONFIGURAT 0001H YES
2 SYSTEM_FUNCT_CONFIGUR 1248 NE_LOGICAL_CONFIGURATIO 0004H YES YES
2 SYSTEM_FUNCT_CONFIGUR 1283 RN22_FEATURE_OPT_001 0000H YES
2 SYSTEM_FUNCT_CONFIGUR 1287 DSCP_FOR_SEMIPER_TDM_IP 002EH YES
2 SYSTEM_FUNCT_CONFIGUR 1288 PHB_FOR_SEMIPER_TDM_IP 0001H YES
2 SYSTEM_FUNCT_CONFIGUR 1289 PORTS_FOR_SEMIPER 00C8H YES
2 SYSTEM_FUNCT_CONFIGUR 1296 RN22_FEATURE_OPT_009 0001H YES YES
2 SYSTEM_FUNCT_CONFIGUR 1297 RN22_FEATURE_OPT_008 0000H YES NO
2 SYSTEM_FUNCT_CONFIGUR 1300 RN22_FEATURE_OPT_004 0024H YES YES
2 SYSTEM_FUNCT_CONFIGUR 1306 WBAMR_IN_ROUTE_SELECT 0000H YES
2 SYSTEM_FUNCT_CONFIGUR 1307 LBCU_WBAMR_PRIORITY 0000H YES
2 SYSTEM_FUNCT_CONFIGUR 1308 EQUIPMENT_DB_UPDATE 0000H YES
2 SYSTEM_FUNCT_CONFIGUR 1318 SPRM_ALARM_SET_LIMIT 000AH YES
2 SYSTEM_FUNCT_CONFIGUR 1319 SPRM_ALARM_CANCEL_LIMIT 000FH YES
2 SYSTEM_FUNCT_CONFIGUR 1370 AMR_LIC_WARN_IN_USE 0000H YES NO
2 SYSTEM_FUNCT_CONFIGUR 1371 AMR_LIC_WARN_THRESHOLD 005AH YES NO
2 SYSTEM_FUNCT_CONFIGUR 1372 AMR_LIC_WARN_DUR 0258H YES NO
2 SYSTEM_FUNCT_CONFIGUR 1373 AMR_LIC_WARN_DUR_CANCEL 000AH YES NO
2 SYSTEM_FUNCT_CONFIGUR 1374 AMR_LIC_ALARM_IN_USE 0000H YES NO
2 SYSTEM_FUNCT_CONFIGUR 1375 AMR_LIC_ALARM_DUR_CAL 000AH YES NO
2 SYSTEM_FUNCT_CONFIGUR 1376 PS_LIC_WARN_IN_USE 0000H YES NO
2 SYSTEM_FUNCT_CONFIGUR 1377 PS_LIC_WARN_THRESHOLD 005AH YES NO
2 SYSTEM_FUNCT_CONFIGUR 1378 PS_LIC_WARN_DUR 0258H YES NO
2 SYSTEM_FUNCT_CONFIGUR 1379 PS_LIC_WARN_DUR_CANCEL 000AH YES NO
2 SYSTEM_FUNCT_CONFIGUR 1380 PS_LIC_ALARM_IN_USE 0000H YES NO
2 SYSTEM_FUNCT_CONFIGUR 1381 PS_LIC_ALARM_DUR_CAL 000AH YES NO
2 SYSTEM_FUNCT_CONFIGUR 1546 ICSU_WINDOW_SIZE 000AH YES YES
2 SYSTEM_FUNCT_CONFIGUR 1553 AAL2_SW_CAPA_AL 0064H YES
2 SYSTEM_FUNCT_CONFIGUR 1623 PROP_ACM_SUPPORT 0000H YES
2 SYSTEM_FUNCT_CONFIGUR 1626 RNC_UPG_FINAL_WAIT_TIME 0018H YES
2 SYSTEM_FUNCT_CONFIGUR 1627 RNC_UPG_PING_WAIT_TIME 000FH YES
2 SYSTEM_FUNCT_CONFIGUR 1632 HSUPA_SERVICE_INDICATOR 0066H YES YES
2 SYSTEM_FUNCT_CONFIGUR 1643 MGW_IP_RTT 0001H YES
2 SYSTEM_FUNCT_CONFIGUR 1644 MGW_TDM_RTT 0001H YES
2 SYSTEM_FUNCT_CONFIGUR 1645 MGW_ATM_RTT 0001H YES
2 SYSTEM_FUNCT_CONFIGUR 1649 IP_LINK_BREAK_REL_DELAY 0005H YES YES
2 SYSTEM_FUNCT_CONFIGUR 1654 LONG_CICS_FOR_TUP 0000H NO
2 SYSTEM_FUNCT_CONFIGUR 1662 REVERTIVE_SWO_IN_USE 00FFH YES YES
2 SYSTEM_FUNCT_CONFIGUR 1663 RN50_MAINT_01 0000H YES
2 SYSTEM_FUNCT_CONFIGUR 1664 RN50_MAINT_02 0008H YES YES
2 SYSTEM_FUNCT_CONFIGUR 1704 RN50_MAINT_28 CA86H YES YES
2 SYSTEM_FUNCT_CONFIGUR 1779 RN5_EP1_FUNCTION_CTRL 0000H YES NO
2 SYSTEM_FUNCT_CONFIGUR 1792 UP_CAP_UPGRADE 0000H YES YES
2 SYSTEM_FUNCT_CONFIGUR 1798 OPT_BLOCK_MOVE_PREVENT 0000H YES YES
2 SYSTEM_FUNCT_CONFIGUR 1814 LCH_IN_USE 0001H YES
2 SYSTEM_FUNCT_CONFIGUR 1815 HSUPA_IC 0000H YES YES
2 SYSTEM_FUNCT_CONFIGUR 1816 IPMUX_MUX_DELAY 0002H YES YES
2 SYSTEM_FUNCT_CONFIGUR 1817 DYNPWROFFSETUSAGE 0000H YES YES
2 SYSTEM_FUNCT_CONFIGUR 1818 LCH_TRAN_IN_USE 0001H YES
2 SYSTEM_FUNCT_CONFIGUR 1819 LCH_DIR_SIZE 0014H YES
2 SYSTEM_FUNCT_CONFIGUR 1840 SRB_PHASE1_SWITCH 0001H YES YES
2 SYSTEM_FUNCT_CONFIGUR 1841 PS_GTP_CAPA_STEP_1 0000H YES
2 SYSTEM_FUNCT_CONFIGUR 1845 PS_GTP_BYTES_AVG_PERIOD 001EH YES
2 SYSTEM_FUNCT_CONFIGUR 1855 CONV_IN_ACTIVATION 0001H YES
2 SYSTEM_FUNCT_CONFIGUR 1863 HSPA_OVER_IUR 0001H YES
2 SYSTEM_FUNCT_CONFIGUR 1864 HSPA_OVER_IUR_EXT 0000H YES YES
2 SYSTEM_FUNCT_CONFIGUR 1866 CERM_CONF_DATA 0000H YES
2 SYSTEM_FUNCT_CONFIGUR 1868 EDPDCHPOWERINTERUSAGE 0001H YES
2 SYSTEM_FUNCT_CONFIGUR 1882 RN60_MAINT_06 000AH YES YES
2 SYSTEM_FUNCT_CONFIGUR 1883 RN60_MAINT_07 001EH YES YES
2 SYSTEM_FUNCT_CONFIGUR 1888 RN60_MAINT_12 000BH YES YES
2 SYSTEM_FUNCT_CONFIGUR 1899 RN60_MAINT_24 011EH YES YES
2 SYSTEM_FUNCT_CONFIGUR 1906 RN60_MAINT_30 0000H YES N
2 SYSTEM_FUNCT_CONFIGUR 1927 RN60_INT_FEAT_RES_01 0000H YES
2 SYSTEM_FUNCT_CONFIGUR 1935 RN60_INT_FEAT_RES_06 0000H YES YES
2 SYSTEM_FUNCT_CONFIGUR 1950 CPC_DL_DRX_RESTRICTED 0000H YES
2 SYSTEM_FUNCT_CONFIGUR 1955 DISABLE_HSPA_CONGESTION 0000H YES
2 SYSTEM_FUNCT_CONFIGUR 1957 DISABLE_HS_CCH_REBAL 0001H YES
2 SYSTEM_FUNCT_CONFIGUR 1958 DISABLE_CELL_HOME_REBAL 0001H YES
2 SYSTEM_FUNCT_CONFIGUR 1967 H248_CGR_HB_SUP_IN_MGW 0019H YES
2 SYSTEM_FUNCT_CONFIGUR 1993 EXTENDED_RNCID_IN_USE 0000H YES
2 SYSTEM_FUNCT_CONFIGUR 2015 TDM_HUNTING_QUEUE_SIZE 0010H YES
2 SYSTEM_FUNCT_CONFIGUR 2018 DYNAMIC_HSUPA_BLER 0000H YES
2 SYSTEM_FUNCT_CONFIGUR 2039 FAST_CELL_PCH_SWITCHING 0000H YES
2 SYSTEM_FUNCT_CONFIGUR 2053 UE_DRX_CELL_FACH 0000H YES
2 SYSTEM_FUNCT_CONFIGUR 2063 THRPUT_REPORTING_TIMER 4E20H YES
2 SYSTEM_FUNCT_CONFIGUR 2064 BTS_LOGGING_ENAB 0001H YES
2 SYSTEM_FUNCT_CONFIGUR 2066 MIN_RE_EDPDCH_GF_TO_BTS 0000H YES
2 SYSTEM_FUNCT_CONFIGUR 2067 MIN_RE_EDPDCH_GF_VAL 0024H YES
2 SYSTEM_FUNCT_CONFIGUR 2069 ETWSREPETITION 0000H YES
2 SYSTEM_FUNCT_CONFIGUR 2077 ETWSSEQUENCINGINTERVAL 0000H YES
2 SYSTEM_FUNCT_CONFIGUR 2086 RTP_SEQ_CHK 0000H YES
2 SYSTEM_FUNCT_CONFIGUR 2089 REBAL_UE_TIMER 0002H YES
2 SYSTEM_FUNCT_CONFIGUR 2093 GIVAXI_PORT 00FFH YES
2 SYSTEM_FUNCT_CONFIGUR 2095 RU40_MAINT_01 0000H YES
7 CALL_CONTROL 165 IU_CR_INCLUDED 0001H YES YES
7 CALL_CONTROL 174 CN_INFORMATION_INFO 0000H YES NO
7 CALL_CONTROL 191 JAPAN_UE_CONTROL 0000H YES YES
7 CALL_CONTROL 193 RN21_MAINT_001 0000H YES
7 CALL_CONTROL 195 RN21_MAINT_003 0000H YES YES
7 CALL_CONTROL 208 RNC_MAINT_001 0190H YES YES
7 CALL_CONTROL 209 RNC_MAINT_002 0000H YES
7 CALL_CONTROL 225 RN30_MAINT_002 0000H YES NO
7 CALL_CONTROL 283 RN40_MAINT_013 2B22H YES YES

7 CALL_CONTROL 365 RNC_L3_CONTROL_001 0000H YES
7 CALL_CONTROL 381 RNC_L3_CONTROL_016 0001H YES YES
7 CALL_CONTROL 450 T323 0000H YES
7 CALL_CONTROL 481 MIN_CPU_LOAD_TRIG_THR 003CH YES YES
7 CALL_CONTROL 482 CPU_LOAD_DIFF_THR 000FH YES YES
7 CALL_CONTROL 483 MINRRCHANDCOUNTTRIGTHR 0000H YES
7 CALL_CONTROL 484 RRCHANDCOUNTDIFFTHR 0000H YES
7 CALL_CONTROL 498 SIMULT_L2_RES_ENABLED 0000H YES
7 CALL_CONTROL 501 OVERALL_L2UTILTHRES_MED 0000H YES
7 CALL_CONTROL 503 OVERALL_L2UTILTHRES_LOW 0000H YES
7 CALL_CONTROL 504 FACH_ACT_TIMERFACTORMED 0000H YES
7 CALL_CONTROL 505 FACH_ACT_TIMERFACTORLOW 0000H YES
9 SYSTEM_SUPERVISION 10 CRC4_TRH_FOR_DEGRAD_MIN 007BH NO
9 SYSTEM_SUPERVISION 11 CRC4_TRH_FOR_ERRORE_SEC 0367H NO
9 SYSTEM_SUPERVISION 28 SEC_EVENT_ALARM_LIMIT 0046H YES
9 SYSTEM_SUPERVISION 29 SEC_EVENT_MON_PERIOD 0007H YES
9 SYSTEM_SUPERVISION 49 BITMAP_CHECK_RECORDS 0200H YES
9 SYSTEM_SUPERVISION 50 BITMAP_CHECK_BYTES 61A8H YES
9 SYSTEM_SUPERVISION 51 BITMAP_SUPERV_INTERVAL 0032H YES
9 SYSTEM_SUPERVISION 52 CHKSUM_SUPERV_INTERVAL 01F4H YES
9 SYSTEM_SUPERVISION 88 STAT_REP_BACK_COMP 000BH YES
9 SYSTEM_SUPERVISION 101 IUB_DATA_RECV_INTERVAL 0005H YES NO
9 SYSTEM_SUPERVISION 102 IUB_CONN_POLLING_TIME 0005H YES NO
9 SYSTEM_SUPERVISION 130 IP_MSG_MON 00FFH YES YES
9 SYSTEM_SUPERVISION 137 SEC_EVENT_LOAD_LIMIT 000AH YES
9 SYSTEM_SUPERVISION 138 SEC_EVENT_UNSUC_LIMIT 0032H YES
9 SYSTEM_SUPERVISION 181 OPERA_FEEDBACK_INTERVAL 000AH YES
10 IMPLEMENTA_OF_CALL_CTRL 4 PCM_MAINT_ANNOUNCE_TL 03E8H YES
12 OVERLOAD 39 NAMETBL_MAX_SERV 03E8H YES
12 OVERLOAD 79 NAMETBL_INCREMENT 01FEH YES NO
12 OVERLOAD 81 AAL2_OLC_ENABLED 00FFH YES
16 ALARM_SYSTEM 0 ALARM_PRINT_END_MARK 0000H YES NO
16 ALARM_SYSTEM 1 LAMP_PANEL_POLARITY 0001H YES NO
16 ALARM_SYSTEM 2 ALARM_DRIVEN_OUTPUTS 0010H YES NO
16 ALARM_SYSTEM 3 LAMP_PANEL_BUZZER 0000H YES NO
16 ALARM_SYSTEM 4 PRINTING_MODE 0000H YES NO
16 ALARM_SYSTEM 8 HEARTBEAT_ALM_INTERVAL 0005H YES YES
16 ALARM_SYSTEM 9 WBTS_LEVEL_ALARM_SWITCH 0001H YES YES
16 ALARM_SYSTEM 10 SUSPEND_MODE_SWITCH 0001H YES YES
16 ALARM_SYSTEM 11 WCEL_OUT_OF_USE_NUM 012CH YES YES
16 ALARM_SYSTEM 12 HSPA_ACT_FAIL_NUM 0064H YES YES
16 ALARM_SYSTEM 13 RNW_DATABASE_FAIL_NUM 0014H YES YES
16 ALARM_SYSTEM 14 WBTS_LEVEL_ALARM_NUM 0064H YES YES
16 ALARM_SYSTEM 15 BUFFER_ALARM_THRESHOLD 0050H YES YES
16 ALARM_SYSTEM 16 USERPLANE_ERR_THRESHOLD 0000H YES
38 MML_COMMAND_LOG 0 WRITE_CACHE_TIMEOUT 003CH YES
38 MML_COMMAND_LOG 1 STORAGE_LENGTH 001EH YES YES
38 MML_COMMAND_LOG 2 MAX_FILE_COUNT 7530H YES
38 MML_COMMAND_LOG 3 ADMINISTRATION_HOUR 0001H YES
38 MML_COMMAND_LOG 4 ADMINISTRATION_MINUTES 0019H YES
43 IWF_CTRL_PARAMETER 9 USED_TONE_SET 000BH YES
44 MML_SESSION 0 PW_CHAR_TO_PRINT 002AH YES
44 MML_SESSION 1 FIRST_MMI_LOGIN_DELAY 000AH YES
44 MML_SESSION 2 MAX_MMI_LOGIN_DELAY 05A0H YES
44 MML_SESSION 3 OVERFLOW_LOGIN_DELAY 0005H YES
44 MML_SESSION 5 DISCLAIMER_TEXT 0000H YES
44 MML_SESSION 6 DEF_MAIN_HEADING_TEXT 0000H YES
50 REPORT_FORMING 1 MEA_REPORT_FORMATS 0003H YES
50 REPORT_FORMING 2 OMES_REPORT_FORMATS 0002H YES
50 REPORT_FORMING 3 PERM_PDH_STATISTICS 00FFH YES
53 MSC_SERVER_PARAMETERS 9 DSCP_FOR_SIGNALLING 0018H YES YES
55 LCS_PARAMETERS 3 EMERGENCY_CALL_ISHO_SUP 0 YES NO
55 LCS_PARAMETERS 11 AGPS_SUPPORT 0 YES NO
55 LCS_PARAMETERS 12 INT_EMERG_CALL_ISHO_SUP 0 YES NO
55 LCS_PARAMETERS 13 NW_AGPS_SUPPORT 0 YES NO
55 LCS_PARAMETERS 15 IUPC_INTERFACE 0 YES NO
56 STLOG_FACILITIES 0 LOG_ON 0001H YES
58 OAM_SECURITY 4 USER_ACCOUNT_LOCK_LIMIT 0000H YES YES
60 MANAGEMENT_PROTOCOLS 13 NE3S_UM 0000H YES
60 MANAGEMENT_PROTOCOLS 16 NE3S 0000H YES
60 MANAGEMENT_PROTOCOLS 18 NE3S_NE_ROLE_SGW 0000H YES
60 MANAGEMENT_PROTOCOLS 19 MGW_SW_RELEASE 0501H YES
65 MGW_LICENCE_HANDLING 0 MGW_LICENCE_WL_HYSTERES 0005H YES
65 MGW_LICENCE_HANDLING 1 MGW_LIS_CON_CAPA_HYSTER 0002H YES
65 MGW_LICENCE_HANDLING 2 MGW_LIS_CON_CAPA_WL 0050H YES
65 MGW_LICENCE_HANDLING 3 MGW_IU_PORT_CAPA_HYSTE 0002H YES
65 MGW_LICENCE_HANDLING 4 MGW_IU_PORT_CAPA_WL 0050H YES
65 MGW_LICENCE_HANDLING 5 MGW_IUIP_PORT_CAPA_HYST 0002H YES
65 MGW_LICENCE_HANDLING 6 MGW_IUIP_PORT_CAPA_WL 0050H YES
65 MGW_LICENCE_HANDLING 7 MGW_NB_PORT_CAPA_HYSTE 0002H YES
65 MGW_LICENCE_HANDLING 8 MGW_NB_PORT_CAPA_WL 0050H YES
65 MGW_LICENCE_HANDLING 9 MGW_MB_PORT_CAPA_HYSTE 0002H YES
65 MGW_LICENCE_HANDLING 10 MGW_MB_PORT_CAPA_WL 0050H YES
65 MGW_LICENCE_HANDLING 11 MGW_ATER_PORT_CAPA_HYST 0002H YES
65 MGW_LICENCE_HANDLING 12 MGW_ATER_PORT_CAPA_WL 0050H YES
65 MGW_LICENCE_HANDLING 13 MGW_EC_CAPA_HYST 0002H YES
65 MGW_LICENCE_HANDLING 14 MGW_EC_CAPA_WL 0050H YES
65 MGW_LICENCE_HANDLING 15 MGW_AIP_PORT_CAPA_HYSTE 0002H YES
65 MGW_LICENCE_HANDLING 16 MGW_AIP_PORT_CAPA_WL 0050H YES
65 MGW_LICENCE_HANDLING 17 MGW_LTE_PORT_CAPA_HYST 0002H YES
65 MGW_LICENCE_HANDLING 18 MGW_LTE_PORT_CAPA_WL 0050H YES
2 SYSTEM_FUNCT_CONFIGUR 2235 TOT_RESET_LIM_PER_SITE 000AH YES
2 SYSTEM_FUNCT_CONFIGUR 2257 UDP_FILL_RATIO_HIGH 005AH YES
2 SYSTEM_FUNCT_CONFIGUR 2258 LEG_ERROR_RATIO_HIGH 000AH YES
2 SYSTEM_FUNCT_CONFIGUR 2259 DYN_HSPA_BLER_MULTI_RAB 0000H YES
2 SYSTEM_FUNCT_CONFIGUR 2263 RU50_SPARE_01 0000H YES
2 SYSTEM_FUNCT_CONFIGUR 2270 RU50_SPARE_08 000BH YES
2 SYSTEM_FUNCT_CONFIGUR 2294 MSG_QUE_TPUT_TIME 0000H YES
2 SYSTEM_FUNCT_CONFIGUR 2295 UNIT_LOAD_CTRL_LIMITS 0000H YES
2 SYSTEM_FUNCT_CONFIGUR 2306 CSFB_WITH_RIM 0000H YES
7 CALL_CONTROL 518 CELL_FACH_RELOC_PREVENT 0000H YES
69 TROUBLESHOOTING 1 CSUP_AUTO_RECOVERY_TIME 0078H YES
TEF O2 Comments
0001H agreed
0001H agreed
0024H agreed
000AH Agreed
66H agreed
0000H agreed
0001H agreed
0000H agreed
0000H agreed
0000H agreed for RU30
0000H agreed SWTN updated
0002H to be trialled 2012

Agreed 0000H
Load Based AMR needed prior to trial
0010H Value rolled out network wide Jan
2014 old value was 11H
Trial needed perhaps for Olympics if Asian
phone vendor is prevalent.
O2 Agreement needed by ATS
007AH agreed for BEACON RNC

Agreed 0001H
Agreed 00H
0000H agreed
0001H
0005H agreed
0001H agreed
0190H agreed
0000H agreed
0000H agreed
0001H agreed
0046H agreed
0032H agreed
0001H agreed
0200H agreed
0006H agreed
1388H agreed
0000H agreed
0001H agreed
0000H agreed
2B22H Agreed
0000H agreed
0001H agreed
Martin Parker
0005H agreed
0000H agreed
0000H agreed
Trial in 2012
0003H agreed
0000H agreed
0001H agreed
0001H agreed
0000H agreed
0000H agreed and disturbance 1354

monitored
CUC optimised for paging delays/fails in Ue
0001 agreed
00FFH agreed
0005H agreed
001EH agreed
0018 O2 Design
Author Version TEF O2 Accepted Updated SW Level
Billy Bremner 1.05 11/6/2014 RN7.0 2.1
Giles Whiteford 1.04 7/24/2014 RN7.0 2.1
Giles Whiteford 1 2/10/2014 RN7.0

OLD TRAC
Author Version O2 Accepted Updated SW Level
Billy Bremner 6.13 4/12/2013 RN2.2 Readiness
Billy Bremner 6.13 draf 2/4/2013 RN6.0 PP1.5+
Billy Bremner 6.12 1/17/2013 RN6.0 PP1.5+

Billy Bremner 6.10A 10/16/2012 RN6.0 PP1.5+
Billy Bremner 6.6 41115 RN6.0 PP1.4+

Billy Bremner 6.3 5/22/2012 RN6.0

Billy Bremner 5.16.2 3/11/2012 RN6.0
Billy Bremner 5.16.1 3/1/2012 RN6.0

Notes
1771 Reverted to 00H after SW issue detected, Bedmin Change 2067 to 024H 2ms TTI improver, 1916 to 0011H for faster
LTE return, 130 Traffica IMSI and IMEI update to parameters and new 01FFH Trial, 1868 update to state SW RN7.0 CD4
minimum requirement due to chipset vendor issues needing to be worked around in this SW. Trials page updated for
actual current/about to go changes
2/1771 UPDATED TO VALUE = 01H
TN dependencies updated
RU 40 PRFILE tracker updated and baselined to RN7.0 2.1

Parameter 2, 2109 added in RN7.0 2.0
Parameter 2, 2110 added in RN7.0 2.0
RU-40 baseline prepared. to DN0948854 Issue 03C Approval Date 31/10/2013
1. SWTN-141 no longer applicable in RN7.0 1.0

OLD TRACKER
Notes
New PRFILE document released and updated this version and changes are between releases added to new worksheet
and all PRFILE settings have been updated. Cd 2.2 analysis and PRFILE CN added to O2 sheet. Trials sheet added. New
Tabs added ( SWTN-159, Trials, BIT Mask, O2 stripped down ) added and SWTN137 tracker updated for TRIAL. Bit mask
CALC sheet added.. CUC rollout 307 to 222H and addition of new 58:4 parameters added New RN6.02.2.1 updates
analysed and sheet now contains O2 friendly PRFILE settings. Added delta checks into trial TAB also.
Setting 1902 updated to show SIB increase dependency, 7:298 SWTN-137 update removes PRFILE dependency and is in
RU-30 SW,1775 Trial needed based upon R&D UE improvement for O2, HSUPA HW detection and algorithm tuning
388,389,390,391 and BIT15 impact in 283. Beacon PRFILE dependencies 1764 and 1937 updated. Documents to EP2.1
analysed. Updated tab to include PRFILE version in use and SWTN versions needed for checking against.
Updated sheet to show O2 Network Design Levels. SWTN analysis and PRFILE document release check. 1939 value
change to 0000H to ensure all new RNC are ready for WN7 SW. WN6 SW BTS must be considered. 1248 changed to
whole network level design setting as all 196 removed. Increased O2 parameters to verify due to trial and optimised
changed to YES. Document reference baseline added also for tracking changes in SWTN and PRFILE
PRFILE additions and updates since last update are
307,1776,1889,1902,1775,387,1671 SWTN 149 updates to be reviewed with JB
PRFILE Rollout parameter changes 481,482,1664,1716,1717,283 & 307 for PP1.4+ baseline. SWTN-137 tracker updated,
HSUPA initial Sir sheet updated, change to defaults 1882,1883,1884 change of defaults but disabled with 1881
Rollout of 1888 to 0BH, 1898 to 0AH, 1899 to 011EH, and trial of 381 on RNC-51 of 01H.
CD1.5 PRFILE 1888 implementation changed where value 00H activates the feature by default value 0BH now prevents
activation and UE failures now back in line with CD1.4+ levels. Rollout of this likely now as default value. Trial of 381
needed in CD1.5+ environment due to implementation changes needed.
RM6.0 EP2 PRFILE CN checks made and updated the PRFILE sheet and removed ICSU load balancer sheet as now rolled
out to network and is considered optimised
Issue 02J of the document is released on NOLS, updated the version in the O2 PRFILE Tab 1886, 1887 added to O2 list
for trial as this protects platform load, 1888 updated with 1.5+ readiness,1891,1897,1900,1938 added for O2. DL ME
SW updated into PRFILE and High Load Trial Page. PRFILE 1898/9 DL handling
1700 SIB-3 RANAP bounce delay 00H and PL question needed , 1881 Mass event SW parameter enabling with value 7H,
A2SP 196/450 now all back 00H. Parameter 1718 added onto sheet for trial and updated 307 setting 200H commented.
Added UE feature 381 for 1.5 Trial analysis to protect against UE problems in signalling.
Parameter 1840 missing SR in the naming field causing audit tool problems, added parameter 1888 for CS MBLB access
improvement with i-phone trial option.
PRFILE Rollout parameter changes 481,482,1664,1716,1717,283 & 307 for PP1.4+ baseline. SWTN-137 tracker updated,
HSUPA initial Sir sheet updated, change to defaults 1882,1883,1884 change of defaults but disabled with 1881
Updated Sheets to show trial RNC extensions

Issue 2G now in force updated value for PRFILE 1935 enable 10H and updated BIT information on PRFILE 307. Nokia
recommended values added also in RED 1664,1716,1717, 7:307
class2 1546 , 1696,1798, class7 191,251,291 updated information, class 2 1939 parameter updated PRFILE document
version 2F now in use. Added Load Balancer and High load trial updated work sheets. Removed RU20 MP5 sheet.
Added latest HSUPA sir AC trial and ICSU load balancer updated values. SWTN-137 latest trial values amended.
Added PRFILE 1939 BRM ONTOP HRNTI RU-20 BTS change to value 01H, added New trial High Load event parameters,
Amended A2S Load balancing PRFILE to show 00H now as safest O2 value
Added PRFILE Trial sheets and amended 7:283 BIT 11 switch ( SWTN-137 Tracker ), Captured O2 RU-30 rollout parameters
and Added Nokia recommendation for 2:1798 to be value 00H now in RU-30 and updated the descriptions after further x-
referencing with SWTN
RU-30 clean up and baseline prepared. to DN0948854 Issue 02C Approval Date 2012-01-24
UTRAN Version
UTRAN Version
Default
Parameter ID Parameter description value
002:0621 RNW_DATA_1 Radio network parameter FF00H
002:0740 RNW_DATA_2 Radio network parameter FF00H
002:1296 RN22_FEATURE_OPT_009 RN2.2 FEATURE OPTIONALITY 009 0H
002:1370 AMR_LIC_WARN_IN_USE AMR Licence warning in use 0H
002:1371 AMR_LIC_WARN_THRESHOLD AMR Licence warning threshold 5AH
002:1372 AMR_LIC_WARN_DUR AMR Licence warning duration 258H
002:1373 AMR_LIC_WARN_DUR_CANCEL AMR Licence cancel warning duration AH
002:1374 AMR_LIC_ALARM_IN_USE AMR Licence alarm in use 0H
002:1375 AMR_LIC_ALARM_DUR_CAL AMR Licence cancel alarm duration AH
002:1376 PS_LIC_WARN_IN_USE PS Licence warning in use 0H
002:1377 PS_LIC_WARN_THRESHOLD PS Licence warning threshold 5AH
002:1378 PS_LIC_WARN_DUR PS Licence warning duration 258H
002:1379 PS_LIC_WARN_DUR_CANCEL PS Licence cancel warning duration AH
002:1380 PS_LIC_ALARM_IN_USE PS Licence alarm in use 0H
002:1381 PS_LIC_ALARM_DUR_CAL PS Licence cancel alarm duration AH
002:1546 ICSU_WINDOW_SIZE ICSU WINDOW SIZE AH
002:1632 HSUPA_SERVICE_INDICATOR HSUPA Service Indicator 0H
002:1664 RN50_MAINT_02 Lossless PDU size change / RB mapping info / Explicit RLC information for SRB3 0H
002:1666 RN50_MAINT_03 RU10 Relocation restriction 0H
002:1668 RN50_MAINT_05 RU10/RU20 counter functionality 0H
002:1669 RN50_MAINT_06 SIB scheduling mechanism 0H
002:1670 RN50_MAINT_07 PDP context activation 0H
002:1671 RN50_MAINT_08 No support for E-DCH information in some messages between RRC-D and MCC 0H
002:1673 RN50_MAINT_10 DL spreading codes 0H
002:1684 RN50_MAINT_11 SIB optimizations 0H
002:1686 RN50_MAINT_13 10ms to 2ms TTI reconfiguration 0H

Waiting time before retransmitted RRCConnectionRequest with protocol error
002:1687 RN50_MAINT_14 indication is processed 0H
002:1689 RN50_MAINT_15 AMR {5.9, 4.74} Codec set usage for R99 Ues 0H
002:1691 RN50_MAINT_16 DRRC feature in CCH to DCH state transition 0H

002:1696 RN50_MAINT_20 Plan upload timer 0H
RNC improvement to prevent unnecessary RL signalling during BTS transport
002:1697 RN50_MAINT_21 congestion 0H
RNC workaround for UE problem: Direct transition problem for CELL DCH-
002:1699 RN50_MAINT_23 CELL/URA PCH 0H
002:1700 RN50_MAINT_24 Workaround to manage SIB update delay functionality 0H
002:1701 RN50_MAINT_25 Data forwarding support for PS service during SRNS relocation 0H
002:1702 RN50_MAINT_26 Functionality using Pmax from target cell in initial power calculation 0H
002:1703 RN50_MAINT_27 HSUPA Initial SIR target offset enhancement and DynPwrOffsetUsage alignment 0H
002:1704 RN50_MAINT_28 HSUPA Initial SIR target offset enhancement and DynPwrOffsetUsage alignment 0H
Location Update handling in case of RL failure to release the CS CN signalling
002:1706 RN50_MAINT_29 connection 0H
Fast moving call might drop unnecessarily because of non-optimal Handover
Control
002:1715 RN50_MAINT_37 decisions 0H
Improvements for RLC parametrization for SRB on HSPA and RNC workaround to
002:1716 RN50_MAINT_38 prevent the 2ms TTI usage based on UE releases 0H
002:1717 RN50_MAINT_39 Incorrect SRB congestion handling 0H

002:1759 RN50_MAINT_42 Automated A2SU/A2SP load balancing prevention 0H
002:1779 RN5_EP1_FUNCTION_CTRL General feature activation 0H
002:1817 DYNPWROFFSETUSAGE DynPwrOffsetUsage 0H

007:0174 CN_INFORMATION_INFO CN Information Info information element for CELL/URA UPDATE CONFIRM 0H
007:0191 JAPAN_UE_CONTROL Special control due to early UEs 0H
007:0208 RNC_MAINT_001 Cell Recovery Improvement 0H
007:0231 RN30_MAINT_008 Feature RAN1797: SRB13.6 Implementation Improvements (Feature allocation) 0H

007:0232 RN30_MAINT_009 Feature RAN1797: SRB13.6 Implementation Improvements (Setting establishment
007:0233 RN30_MAINT_010 causes for Common Channel Setup) 0H
007:0234 RN30_MAINT_011 Feature RAN1797: SRB13.6 Implementation Improvements (Setting establishment
007:0235 RN30_MAINT_012 causes for selecting fast or low DCH signaling link usage) 0H
007:0238 RN30_MAINT_015 BSIC verification in case of PS NRT calls 0H
007:0239 RN30_MAINT_016 Non-Performing Cell Recovery Improvement 0H
007:0249 RN30_MAINT_026 The HSUPA resource management optimization 0H
007:0251 RN30_MAINT_028 Immediate DSP resource release, when possible 0H

007:0269 RN40_MAINT_001 MOCN related correction for compatiblity with other vendors core networks 0H
007:0270 RN40_MAINT_002 MOCN activation via LK 0H
Improvement to prevent problems when the initialization of BTS power
007:0279 RN40_MAINT_009 measurement fails 0H
007:0280 RN40_MAINT_010 IP (de)fragmentation support in Iu-PS on NPS1 0H

007:0281 RN40_MAINT_011 Adjustable HSUPA BLER target for PS NRT 0H
Admission control
007:0283 RN40_MAINT_013 modifications in RU10 0H
007:0284 RN40_MAINT_014 PRFILE control for SIR error to trigger CTS 0H
007:0285 RN40_MAINT_015 Limitation for HSDPA return channel of UL DCH with AMR 0H
007:0286 RN40_MAINT_016 Transport changes for RACH capacity 0H
007:0287 RN40_MAINT_017 STM-1 interface capacity overbooking 0H

007:0288 RN40_MAINT_018 Call resource release delay 0H
007:0290 RN40_MAINT_020 Limitation of new HS-DSCH allocations 0H
007:0291 RN40_MAINT_021 Dynamic Link Optimization 0H
007:0295 RN40_MAINT_025 AAL2 signalling workaround for other vendors MGW problem 0H
007:0296 RN40_MAINT_026 SAB Failure/Restart sending on RNC initiated CBC connection 0H
007:0297 RN40_MAINT_027 Direct PCH to DCH state transition 0H
007:0298 RN40_MAINT_028 Optimized algorithm for PBS in case of BTS/AAL2 congestion 0H

007:0299 RN40_MAINT_029 T314 timer offset 0H
007:0301 RN40_MAINT_031 User amount increase with RM3 capacity counter update by using of CDSP-DH 0H
007:0304 RN40_MAINT_034 NBAP overload control algorithm 0H
007:0306 RN40_MAINT_036 PS memory supervision 0H
007:0307 RN40_MAINT_37 PS RAB ACT FAIL UE with iPhone 3G, 3GS, 4 0H

007:0308 RN40_MAINT_038 Terminating Low Priority Signaling initiates RT over NRT 0H
009:0101 IUB_DATA_RECV_INTERVAL IUB OandM TCP/IP connection data receive interval 5H
009:0102 IUB_CONN_POLLING_TIME IUB OandM TCP/IP connection polling interval 5H
009:0130 IP_MSG_MON RNC Support for Traffica 0H
016:0000 ALARM_PRINT_END_MARK Alarm print end mark 0H
016:0001 LAMP_PANEL_POLARITY Lamp panel polarity 1H
016:0002 ALARM_DRIVEN_OUTPUTS Number of alarm outputs directed by alarms 10H
016:0003 LAMP_PANEL_BUZZER Activation of lamp panel buzzer by alarms 0H
016:0004 PRINTING_MODE Printing mode 0H
016:0008 HEARTBEAT_ALM_INTERVAL Heartbeat alarm interval 5H
016:0009 WBTS_LEVEL_ALARM_SWITCH WBTS Level Alarm Switch 1H
016:0010 SUSPEND_MODE_SWITCH Suspended Mode Switch 1H
016:0011 WCEL_OUT_OF_USE_NUM WCEL Out Of Use Alarm Number 12CH
016:0012 HSPA_ACT_FAIL_NUM HSPA Activation Failure Number 64H
016:0013 RNW_DATABASE_FAIL_NUM RNW Database Fail Alarm Number 14H
016:0014 WBTS_LEVEL_ALARM_NUM WBTS Level Alarm Number 64H
016:0015 BUFFER_ALARM_THRESHOLD Buffered Alarm Threshold 50H
RN5.0
Additional reference MP5
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
TS-RNC-SW-149
PRFILE workarounds for 3rd party vendor issues x
TS-RNC-SW-148
RU20 impact on counters x
TS-RNC-SW-148
RU20 impact on counters x
TS-RNC-SW-149
TS-RNC-SW-149
TS-RNC-SW-149
TS-RNC-SW-149
TS-RNC-SW-046
Restriction on number of cells in SIB11/12 due to inconsistency problem in
3GPP TS 25.331 x
TS-RNC-SW-149
TS-RNC-SW-149
TS-RNC-SW-149
TS-RNC-SW-149
x
x
TS-RNC-SW-149
x
x
x
TS-RNC-SW-159
Recommended parameter set
and enhanced algorithms for
optimizing RRM
functionalities x
TS-RNC-SW-159
optimizing RRM
functionalities x
TS-RNC-SW-159
optimizing RRM
functionalities x
x
x
TS-RNC-SW-159
optimizing RRM
functionalities x
x
x
x
x
x
x
x
x
x
x
x
TS-RNC-SW-141
Cell_PCH L2 Resource Optimization x
x
x
x
TS-RNC-SW-130
IP (de)fragmentation support in Iu-PS on NPS1 x
x
TS-RNC-SW-137
Admission control modifications x
x
x
TS-RNC-SW-140
Changes in RACH capacity x
TS-RNC-SW-136
NPS1(P) ATM CBR VP and VC shaping inaccuracy requires change of policing
parameters x
x
x
x
x
x
x
TS-RNC-SW-137
Admission control modifications x
x
x
x
TS-RNC-HW-076
NP2GE-B and NP8S1-B PS Memory Failure x
TS-RNC-SW-149
PRFILE workarounds for 3rd party vendor issues
TS-RNC-SW-167
RNC workaround to disable Lossless PDU size change support in RNC x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
FEATURE ( MML ) Licence Name
831 Over Clocking CCP-18 ( 196 step 7 LK ) CAPACITY issues 19
1754 HSUPA Pre-emption Light REL1 WBTS RNC TRIAL
1070 IP Based Iu-PS p.c RNC2600 ONLY
958 Iub throughput 1 Mbit/s
959 AMR Capacity 1 Erl delivered as 2600
960 Carrier connectivity delivered as 2600
1050 Modifiable throughput configuration
ALL RNC
973 KPI Support in RNC
636 Flexible Connect. Of VPCs for WBTS
638 Cell Throughput Measurements
965 Collection of Key Counters
975 Subscriber Trace
633 Transport Bearer Tuning p.c
635 Path Selection
631 Dyn Scheduling HSDPA w. PathSel
619 Flexible Iu p.c
641 HSDPA with QPSK and 5 Codes
968 HSDPA Simultaneous AMR Voice Call
967 HSDPA Serving Cell Change
627 HSDPA Dynamic Resource Allocation
620 HSDPA Cell upg from 5 to 10 Codes
621 HSDPA Cell upg from 10 to 15 Codes
1028 HSDPA 10 Mbps per User
623 HSDPA Code Multiplexing
628 HSPA Layering for Ues
625 HSDPA 16kbps DCH Return Channel
622 HSDPA 48 Users per Cell
630 HSUPA with Simultaneous AMR Voice Call
624 HSUPA Basic 24 users per BTS
1029 HSUPA 2.0 Mbps
969 Dynamic HSDPA Transport Scheduling
974 RNC Mngmt Tool for Fault Localisation
635 RNC GUI BTS Connection Resources
1472 IP Based Iur p.c
1079 IP Based Iub
1080 Soft Handover Detected Reporting p.c
1279 HSDPA Inter-frequency Handover p.c
1085 HSDPA 14 Mbps per User
1087 HSDPA 64 Users per Cell
1088 HSUPA 60 Users per BTS
1089 HSDPA QoS Aware Scheduling p.c
1090 Streaming QoS for HSPA
1091 HSPA Multi NRT RABs
1092 PS RAB Reconfiguration
1093 HSDPA Congestion Control p.c
1102 LCS Support in Drift RNC
1304 LCS Periodical Reporting
1061 HSPA Inter-RNC Cell Change
1302 Directed Retry
1309 UTRAN-GAN Interworking
1375 LCS Shape Conversion
1306 SSH Server
1060 Inter-frequency Handover over Iur
1471 HSDPA 64QAM
1086 HSUPA 5.8 Mbps
1475 HSUPA 2ms TTI
1476 FDPCH & Continuous Packet Connectivity (CPC)
1477 CS Voice Over HSPA
1478 HSPA 72 Users per Cell
1459 Power Saving Mode for BTS
1100 Broadcast of A-GPS Assistance Data
1486 Multi-Operator Core Network
1485 24 kbps Paging Channel
1107 Pre-Aggregation of RCPM Data in RNC p.c
811 M3UA Association Set Measurement
1472 Iu-PC SCTP Association Priority
1554 MIMO
1686 Dual Cell HSDPA p.c
1432 Support for I-HSPA Sharing and Iur Mobility Enhancements
1690 Common Channel Setup
1755 LTE Interworking
1756 LTE PS Handover
1938 Blind IFHO in RAB Setup Phase/Multi Band Load Balancing
1061 Extension of HSPA over Iur
4160 Fast HSPA Mobility
4348 AMR with DCH(0,0) support on Iur
4545 Voice Call Priorization during High Traffic Load
4492 Mass Event Handler
1069 IP Based Iu-CS LK
1497 HSUPA 16QAM LK
1796 HSPA 128 Users per Cell LK
3384 Fast Dormancy Profiling LK
3422 Application Aware RAN LK
3898 Layering in RRC Connection Release LK
3899 3GPP Rel8 CBS ETWS support LK
3901 Femto Handover Control LK
3903 Redirection to LTE (Smart Layering) LK
4290 Automatic Access Class Restriction LK
4293 Fast Cell_PCH Switching LK
1897 BW utilization counters
4538 Continuous Packet Connectivity for 128 users
2118 Dual Band HSDPA
4781
4780
4654 Data Session Profiling
4839 Measurement based LTE Layering
4783 HSUPA Compressed Mode for LTE and Inter-frequency Hando
5169 Configurable Ranges for User Throughput Counters
4784 RNC Resiliency
3414 Smart LTE Handover
5170 BTS Load Based AACR
1794
1798
5248 AMR Codec Set for 2G-3G TrFO
5261 IMSI-based Call Monitoring
3732 Enhanced Virtual Antenna Mapping
3287 Multi-Cell HSDPA
O2 Capacity in LK Control Type LICENCE CODE ALL
Capacity - 450 On/Off - Mbps RAN1100
Capacity - 2800 1PCS - On/ Off RU00399
Capacity -2800 1PCS - On/ Off RU00211
Capacity - 2500 Mbps - 1200 was ordered by O2 RNC3223
Capacity - 50000 Per Erlangs RNC3225
Capacity - 2800 Per Carrier -1080 was ordered by O2RNC3227
Capacity - 450 On/Off RNC3257
RNC450 ONLY
Capacity - 2800 Per Cells RU00027
Capacity - 2800 Node B RU00053
Capacity - 2800 On/Off RU00068
Capacity - 2800 Per Node B RU00072
Capacit y -2800 On/Off RU00075
Capacity - 2800 Capacity per BTS RU00217
Capacity - 2800 Per Cell RU00232
Capacity - 2800 Capacity of BTS RU00238
Capacity - 2800 Per Node B RU00241
Capacity - 2800 Capacity of Cells RU00403
Capacity - 2800 Capacity of Cells RU00488
Capacity - 2800 # of cells RU00432
Capacity - 2800 On/off RU00529
Capacity - 2800 # cells RU00535
Capacity - 2800 capacity # cells RU00495
XML LAC
H3703099 FI32112465361
H3700756 FI32113753909
H3500865 FI32113545452
H3700755 FI32113770605
H3700754 FI32113737264
H3700222 FI32113745354
H2403704 FI32112433128
H2403695 FI32112499003
H3700223 FI32113734999
H3300705 FI32113370853
H3700224 FI32113713419
H2403736 FI32112423745
H2403701 FI32112455494
H3700225 FI32113777402
H2403717 FI32112412442
H2403715 FI32112432800
H2403714 FI32112427746
H2403712 FI32112497536
H2403710 FI32112424741
H2403709 FI32112445260
H2403705 FI32112428416
H2403711 FI32112473435
H2403720 FI32112449275
H2403706 FI32112434286
H2403707 FI32112452021
H3700226 FI32113753050
H2403723 FI32112442293
H2403721 FI32112407959
H2403702 FI32112483881
H3300703 FI32113394669
H2403738 FI32112415473
H2900252 FI32112926608
H2904603 FI32112977263
H2403739 FI32112422215
H3700227 FI32113728948
G4800340 FI32104888854
H3700228 FI32113707172
H2403722 FI32112404994
H2403713 FI32112498170
H2403716 FI32112444714
H3700217 FI32113724448
H2403737 FI32112446716
H2900253 FI32112949223
H2403729 FI32112416395
H2403727 FI32112495167
H2403719 FI32112441603
H2403699 FI32112466191
H2403741 FI32112449994
H2403728 FI32112415816
H2403740 FI32112465794
H2403724 FI32112439217
H3700218 FI32113791873
H3700219 FI32113789497
H3703301 FI32113765717
H2403697 FI32112467025
H2403698 FI32112443441
H1200447 FI32111209126
H2403694 FI32112419230
H2403693 FI32112485289
H2403735 FI32112425717
H0400564 FI32110443241
H0406537 FI32110448722
H2403732 FI32112419163
H2403725 FI32112407551
H2403733 FI32112485637
H2403700 FI32112432327
H2403703 FI32112450630
H2403696 FI32112442036
H2403731 FI32112425775
H2403730 FI32112494003
H2800164 FI32112823690
H2403719
K1201378
K1201376
K1201385
K1201377
I1802301
K1201387
K1201380
K1201381
K1201389
K1201383
K1201388
K1201384
K1201379
K1201386
K1201382
Higher Byte
16 15 14 13 12 11 10
0 0 1 0 1 0 1
0 0 1 0 1 1 1
0 0 0 0 1 1 1
0 0 0 0 1 1 0
0 0 0 0 0 1 0
0 0 0 0 0 0 0
0 0 0 0 0 0 0
0 0 0 0 0 0 0
Lower Byte
9 8 7 6 5 4 3
1 0 0 1 0 0 0
1 0 0 1 0 0 0
1 0 0 1 0 0 0
1 0 0 1 0 0 0
1 0 0 1 0 0 0
1 0 0 1 0 0 0
0 0 0 1 0 0 0
0 0 0 1 0 0 0
Binary
PP1.1Key BRMBit
HEX Value Reason changes
Version
2 1 BRM_QDQX.I
MG 15.17-0
PP2.11 BIT
1 RU-30 0 switch
BIT Bit
11 changed 2B22
for
toperfromance
0 in PP1.3 RN6.0 CD2.2
improvement
SWto for BRM
RNC-52,5,14,58,17,26,32,51
for1 MBLB and PP1.4+
-44(PP1.1) and MBLB readiness
14
CD1.35
Version to BRM
8.42-
1 0RU20 PP2.11&
2F22 BIT
MP3 default BRM change 1211
Rolled to8.41-
allows 1the
out
Version
6 BIT
PP1.2 BITto 1 HSUPA
10
1 0 7 requires
F22PP1.2 Compliance with counters
RU20 to 1
BIT 2 to with
1
1 0 D22 RU20 PP1.2 CD1.2
CD2.1 BRM
ONTOP BRM
Version 8.41-
1 0 522with RU10 implemetation8.40-6
Comply in CD1.1
7 requires
1 0 122 BRM auto tuning OFFBIT requires
9 to 1
(Bit8=0,
1 0 22SWTN 137 AC CD1.35 BRM
Bit6=1,
0 0 20SWTN 137 AC CD1.2 OntopsBit2=0)
Live Values for RU-30 currentlly

Current Trial values on RNC that differ from UTRAN allowed RU-30
Not in use Trialed value
2,51 and MBLB readiness
Non Performing Cell Recovery Tracker
Class Class_Name Identifier Name O2 Value
2 SYSTEM_FUNCT_CONFIGUR 1296 RN22_FEATURE_OPT_009 0001H
7 CALL_CONTROL 208 RNC_MAINT_001 0190H
7 CALL_CONTROL 239 RN30_MAINT_016 0046H
Modify USED IN O2 Description
YES TRIAL Phase 3 restarts per BTS per day: Restarts enabled 2
YES YES restarts per BTS per day: Restarts Disabled
YES Trial Phase 3 RL additions w/o RRC activity: 12CH/300 decimal
YES Trial Phase 3 RL additions w/o RRC activity: 15EH/350 decimal
YES YES RL additions w/o RRC activity: 190H/400 decimal
YES YES RRC success ratio percentage: 46H/70% decimal
YES Trial Phase 3 Radio link failures: 3CH/60 decimal
YES Trial Phase 3 Radio link failures: 28H/40 decimal
YES YES Radio link failures: 32H/50 decimal
YES YES Tracing for recovery actions: 1H/1 decimal
YES Trial Phase 3 Observation window for RRC success: 158H/600 decimal
YES Trial Phase 3 Observation window for RRC success: 1A4H/420 decimal
YES YES Observation window for RRC success: 200H/512 decimal
YES Trial Phase 3 Recovery block time in hours after the RNC start [hours]: 4
YES YES Recovery block time in hours after the RNC start [hours]: 6
NOTES
RNC-
RNC-05, 20, 28, 37, 69
RNC-67,17,32,47,21,52
Log checking needed
RNC
RNC
SAME as Live
SAME as Live
RNC
RNC
SAME as Live
SAME as Live
RNC
RNC
SAME as Live
RNC
SAME as Live
POOL Share
80-20 RNC-8 RNC-47 RNC-64 RNC-69 RNC-75
100-0 RNC-7 RNC-9 RNC-25 RNC-57 RNC-59 RNC-76 RNC-79 RNC-82 RNC-87 RNC-89
90:10 RNC-56 RNC-58 RNC-60 RNC-61 RNC-66 RNC-71 RNC-73 RNC-77
RNC2600 84% RNC-1 RNC-2 RNC-5 RNC-6 RNC-12 RNC-13 RNC-17 RNC-21 RNC-22 RNC-26
RNC2600 86% RNC-3 RNC-4 RNC-14 RNC-16 RNC-18 RNC-19 RNC-20 RNC-23 RNC-29 RNC-32
RNC-89
RNC-28 RNC-31 RNC-33 RNC-37 RNC-38 RNC-43 RNC-52 RNC-54 RNC-84 RNC-85 RNC-86 RNC-89 RNC-90 RNC-92
RNC--34 RNC-39 RNC-40 RNC-44 RNC-45 RNC-48 RNC-49 RNC-50 RNC-51 RNC-55
RNC-95 RNC-96
Class Class_Name Identifier Name HEX Value
2 1704 RN50_MAINT_28 CA86

2 1703 RN50_MAINT_27 6442
2 SYSTEM_FUNCT_CONFIGUR 1703 RN50_MAINT_27 4440
2 SYSTEM_FUNCT_CONFIGUR 1704 RN50_MAINT_28 AA66
2 SYSTEM_FUNCT_CONFIGUR 1704 RN50_MAINT_28 A864

Reason
Optimised Values for PP1.4+

Optimised Values for PP1.4+
Optimisation of RU-30 functionality set BER-32 22/04/2012
Optimisation of RU-30 functionality set BER-32 22/04/2012
Optimisation of RU-30 functionality set BER-32 18/.04/2012
Optimise the 10ms alignment low bitrate power offset initila Sir RNC-1,2,21,30,55
Original HSUPA Sir values used and netwrok wide value at MP4 awaiting above rollout
Original HSUPA Sir values used and netwrok wide value at MP4 awaiting above rollout
Class
2
2
Class_Name Identifier
SYSTEM_FUNCT_CONFIGUR 1881
Tarcker of DL PP1.5+ enabled SW RNC-11&26
Tracker of trial UL
RNC-21 11/04/2012
RNC-55 11/03/2012
Name HEX Value
RN60_MAINT_05 0000H
RN60_MAINT_06 000AH
RN60_MAINT_07 001EH
RN60_MAINT_08 000AH
RN60_MAINT_09 0000H
Full network rollout agreed
RN60_MAINT_23 000AH
RN60_MAINT_24 011EH
RN50_MAINT_28 A864
RN60_MAINT_05 0007H
RN60_MAINT_06 000AH
RN60_MAINT_07 001EH
RN60_MAINT_08 000AH
RN50_MAINT_39 0001H
Live Values for RU-30 Live Network
Current Trial values on RNC that differ from UTRA

Enabler Parameter for Each area 3 X BIT
switch BIT1 TVM, BIT2 Temporary UL
DCH maximum bit Reason
rate, BIT3 Temporary
maximum number of HSUPA users,
Switching each BIT to 1 enables new
functionality,
Vlaue
Initial setting 7H is all 3
for trial
active
Initial setting for trial
Not used yet in trial
55 enabled as ONTOP AC optimising High Load event and RNC-21 11/04/2012
RNC-21 Initail settings for review with R&D

Prevent unecessary RL retries
Live Values for RU-30 Live Network currentlly
t Trial values on RNC that differ from UTRAN allowed RU-30 21&55

Class Class_Name Identifier Name HEX Value
7 CALL_CONTROL 481 MIN_CPU_LOA003CH
7 CALL_CONTROL 482 CPU_LOAD_DI 000FH
Reason
ICSU Load Balancing feature RNC-,52,51,32,17. 26 deployed 60% 3CH 11/04/2012
ICSU Load Balancing feature RNC 52,51,32,17 26 deployed 15% 0FH 11/04/2012


Nokia UTRAN Parameters

Uploaded by

Copyright:

Available Formats

Nokia UTRAN Parameters

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Nokia UTRAN Parameters

Uploaded by

Copyright:

Available Formats

FMCS Changes: FMCS 1, 2 and 3 have been deleted as they are no longer in use.

For FMCSs 5, 8, 20 and 21

Addition time from 100ms to 200ms. AdditionTime = 200 ms (Internal =9)

RNC parameter for setting SRB bit rate to 13.6 kb/s:

StandAloneDCCHBitRate = 13.6 (136 internal)

How to read the table:

ork plan files (XML)

& Optimisation - RF Tuning

Network Wide Parameters: Ownership: Radio Engineering

Approved changes will be implemented and communicated to all interested parties

s are not part of this process - they remain your responsibility

Handover Control Parameters

ADJD HC An additional intra-frequency neighbour cell is identified with

1...65535, step 1 Not applicable Not applicable

0...31, step 1 Not applicable Not applicable

Not defined (0), Network Not applicable Not applicable

No Auto Disc Check Required

No Auto Disc Check Required

No Auto Disc Check Required

No Auto Disc Check Required

Handover Control Parameters

ADJG HC This parameter indicates whether the BCCH ARFCN of the

- the GSM neighbor cell is monitored for the inter-system

- the GSM neighbor cell is not monitored for the inter-system

If the Wireless Priority Service feature is enabled, then the

The total number of intra-frequency, inter-frequency and GSM

The System Information Block type 11bis (SIB11bis) increases the

No (0), GSM 1900 (1) Not applicable

0...95, step 1, Zero has special meaning Not applicable

Not defined (0), Network originated Not applicable

MACRO RT & NRT, F1

Not applicable Not applicable

Not applicable Not applicable

Not applicable Not applicable

Not applicable Not applicable

Not applicable Not applicable

Not applicable Not applicable

Not applicable Not applicable

Not applicable Not applicable

Not applicable Not applicable

O2 values depend on whether f1 or f2.

No Auto Disc Check Required

Handover Control Parameters

Cell Identifier ADJI HC

Inter-frequency adjacency identifier ADJI Identification

Change origin ADJI O&M

An inter-frequency neighbour cell is identified with the UTRAN

1...65535, step 1 Not applicable

0...63, step 1 Not applicable

Not defined (0), Network originated configuration Not applicable

MACRO RT & NRT, F1

Not applicable Not applicable

Not applicable Not applicable

Not applicable Not applicable

Not applicable Not applicable

Not applicable Not applicable

Not applicable Not applicable

Not applicable Not applicable

Not applicable Not applicable