Scribd
Upload
74 views

Cooling of Electronic Systems MCTR 1004 - Dr. Hamdy Kandil Tutorial 1

This document contains 4 problems related to cooling of electronic systems. Problem 1 involves calculating the temperature difference across a silicon chip. Problem 2 involves calculating the temperature of an aluminum plate cooling 4 power transistors. Problem 3 involves calculating the power dissipation of a transistor cooled by air flow. Problem 4 involves calculating the surrounding surface temperature needed to cool an electronic box by radiation alone.

Uploaded by

karu320
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
74 views

Cooling of Electronic Systems MCTR 1004 - Dr. Hamdy Kandil Tutorial 1

This document contains 4 problems related to cooling of electronic systems. Problem 1 involves calculating the temperature difference across a silicon chip. Problem 2 involves calculating the temperature of an aluminum plate cooling 4 power transistors. Problem 3 involves calculating the power dissipation of a transistor cooled by air flow. Problem 4 involves calculating the surrounding surface temperature needed to cool an electronic box by radiation alone.

Uploaded by

karu320
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Cooling of Electronic Systems MCTR 1004 Dr.

Hamdy Kandil
Tutorial 1

Problem 1: The heat generated in the circuitry on


the surface of a silicon chip (k =130 W/mC) is
conducted to the ceramic substrate to which it is
attached. The chip is 6 mm 6 mm in size and 0.5
mm thick and dissipates 3 W of power. Disregarding
any heat transfer through the 0.5-mm-high side
surfaces, determine the temperature difference
between the front and back surfaces of the chip in
steady operation.

Problem 2: Four power transistors, each dissipating 15 W, are mounted on a thin vertical
aluminum plate 22 cm 22 cm in size. The heat generated by the transistors is to be dissipated
by both surfaces of the plate to the surrounding air at 25C, which is blown over the plate by a
fan. The entire plate can be assumed to be nearly isothermal, and the exposed surface area of
the transistor can be taken to be equal to its base area. If the average convection heat transfer
coefficient is 25 W/m2C, determine the temperature of the aluminum plate. Disregard any
radiation effects.

Problem 3: A transistor with a height of 0.4 cm and a diameter of


0.6 cm is mounted on a circuit board. The transistor is cooled by air
flowing over it with an average heat transfer coefficient of 30
W/m2C. If the air temperature is 55C and the transistor case
temperature is not to exceed 70C, determine the amount of power
this transistor can dissipate safely. Disregard any heat transfer
from the transistor base.

Problem 4: Consider a sealed 20-cm-high electronic box


whose base dimensions are 40 cm 40 cm placed in a
vacuum chamber. The emissivity of the outer surface of the
box is 0.95. If the electronic components in the box dissipate
a total of 100 W of power and the outer surface temperature
of the box is not to exceed 60C, determine the temperature
at which the surrounding surfaces must be kept if this box is
to be cooled by radiation alone. Assume the heat transfer
from the bottom surface of the box to the stand to be
negligible.

You might also like