The document contains a series of commands for a CAD program, including commands to erase objects, assign materials, stretch objects, move objects, copy objects, and rotate objects. The commands reference selecting objects, specifying points, and undoing previous operations. Errors are reported for too many objects being selected and intersections being checked. Settings are shown for undo, control, combine, and layer options.
The document contains a series of commands for a CAD program, including commands to erase objects, assign materials, stretch objects, move objects, copy objects, and rotate objects. The commands reference selecting objects, specifying points, and undoing previous operations. Errors are reported for too many objects being selected and intersections being checked. Settings are shown for undo, control, combine, and layer options.
The document contains a series of commands for a CAD program, including commands to erase objects, assign materials, stretch objects, move objects, copy objects, and rotate objects. The commands reference selecting objects, specifying points, and undoing previous operations. Errors are reported for too many objects being selected and intersections being checked. Settings are shown for undo, control, combine, and layer options.
The document contains a series of commands for a CAD program, including commands to erase objects, assign materials, stretch objects, move objects, copy objects, and rotate objects. The commands reference selecting objects, specifying points, and undoing previous operations. Errors are reported for too many objects being selected and intersections being checked. Settings are shown for undo, control, combine, and layer options.
Download as DOCX, PDF, TXT or read online from Scribd
Download as docx, pdf, or txt
You are on page 1of 4
Specify base point or Command: Command: MATERIALS
[Displacement] Command: ** STRETCH **
<Displacement>: Command: _erase 1 found Command: Specify stretch point or [Base Specify second point or <use Command: point/Copy/Undo/eXit]: first point as displacement>: Command: Command: _QSAVE Too many objects selected for Command: Command: Command: INTERSECT Command: Command: _erase Command: Command: _move Select objects: 1 found Command: Command: Specify opposite Select objects: 1 found Command: corner or Select objects: Command: [Fence/WPolygon/CPolygon]: Select objects: 1 found, 2 Command: *Cancel* total Command: Command: Command: Command: Command: Select objects: Command: _erase Command: Select objects: 1 found Command: Command: Specify base point or Command: Command: [Displacement] Select objects: Command: <Displacement>: Command: Command: Specify second point or <use Command: Command: Command: first point as displacement>: Command: Too many objects selected for Command: Command: Command: INTERSECT Command: _erase 1 found Command: Command: Command: Automatic save to Command: Command: Command: C:\Users\santos\appdata\loca Command: Command: Command: l\temp\stairsss_1_1_3910.sv$ Command: Command: ... Command: _erase 1 found Command: Command: Press ESC or ENTER to exit, or Command: Command: Command: right-click to display shortcut- Command: Command: menu. Command: Command: *Cancel* ** STRETCH ** Command: Specify stretch point or [Base Command: Command: Command: *Cancel* point/Copy/Undo/eXit]: Command: Command: Command: Command: Command: Command: _erase 1 found Command: Command: Command: Specify opposite Command: _.undo Current Command: corner or Command: settings: Auto = On, Control = [Fence/WPolygon/CPolygon]: Command: Specify opposite All, Combine = Yes, Layer = Command: Command: corner or Yes Command: Command: [Fence/WPolygon/CPolygon]: Enter the number of Command: Command: _erase 2 found Command: operations to undo or Command: Command: [Auto/Control/BEgin/End/Ma Command: Command: Specify opposite Command: _erase 2 found rk/Back] <1>: 1 Command: corner or MATERIALASSIGN Command: [Fence/WPolygon/CPolygon]: Command: Command: Command: Command: Command: Command: Command: Command: _copy Command: Command: _erase 2 found Select objects: 1 found Command: Command: Command: MATERIALASSIGN Command: Specify opposite Select objects: 1 found, 2 corner or total Command: Command: [Fence/WPolygon/CPolygon]: Command: Command: Command: Select objects: Command: Command: Command: Command: _erase 1 found Current settings: Copy mode Command: = Multiple Command: Command: *Cancel* Command: Specify base point or Command: Command: Specify opposite [Displacement/mOde] Command: *Cancel* corner or <Displacement>: Command: [Fence/WPolygon/CPolygon]: Specify second point or Command: Command: Command: [Array] <use first point as Command: Command: displacement>: Command: Command: Command: _erase 3 found Specify second point or Command: [Array/Exit/Undo] <Exit>: Command: Command: *Cancel* Command: Command: Command: Command: Command: Command: Command: *Cancel* Command: MATERIALASSIGN Command: Command: INTELLIZOOM INTELLIZOOM ** MOVE ** Current positive angle in UCS: Command: INTELLIZOOM INTELLIZOOM Specify move point or [Base ANGDIR=counterclockwise Command: INTELLIZOOM point/Copy/Undo/eXit]: ANGBASE=0 Command: Specify opposite Command: Command: corner or Command: Command: Select objects: 1 found [Fence/WPolygon/CPolygon]: Command: _.undo Current Command: settings: Auto = On, Control = ** STRETCH ** Select objects: 1 found, 2 All, Combine = Yes, Layer = Specify stretch point or [Base total ** STRETCH ** Yes point/Copy/Undo/eXit]: Specify stretch point or [Base Enter the number of Command: *Cancel* Select objects: point/Copy/Undo/eXit]: operations to undo or Command: '_.properties [Auto/Control/BEgin/End/Ma Command: Specify base point: Command: rk/Back] <1>: 1 '.PROPERTIES Command: Too many objects selected for Command: Command: INTERSECT Command: _.undo Current Command: ** MOVE ** settings: Auto = On, Control = Command: _.undo Current Specify move point or [Base Specify rotation angle or All, Combine = Yes, Layer = settings: Auto = On, Control = point/Copy/Undo/eXit]: [Copy/Reference] <180>: Yes All, Combine = Yes, Layer = Checking 1225 intersections... 29<45 Enter the number of Yes Command: 3DROTATE operations to undo or Enter the number of Command: [Auto/Control/BEgin/End/Ma operations to undo or Current positive angle in UCS: Automatic save to rk/Back] <1>: 1 INTELLIZOOM [Auto/Control/BEgin/End/Ma ANGDIR=counterclockwise C:\Users\santos\appdata\loca INTELLIZOOM rk/Back] <1>: 1 ANGBASE=0 l\temp\stairsss_1_1_5733.sv$ Command: '.ACGZDRAGACTION 1 found ... Command: Command: Specify opposite Command: _.undo Current corner or Specify base point: Command: settings: Auto = On, Control = [Fence/WPolygon/CPolygon]: Too many objects selected for Command: All, Combine = Yes, Layer = Command: INTERSECT Command: Yes Command: Enter the number of ** MOVE ** Specify rotation angle or operations to undo or Specify move point or [Base [Copy/Reference] <298>: [Auto/Control/BEgin/End/Ma point/Copy/Undo/eXit]: Command: ROTATE Command: rk/Back] <1>: 1 INTELLIZOOM Command: Command: INTELLIZOOM INTELLIZOOM Command: Command: Too many objects selected for Specify rotation angle or Too many objects selected for Command: INTERSECT [Copy/Reference] <270>: INTERSECT Command: Checking 903 intersections... Command: _.undo Current Specify rotation angle or Command: ROTATE Specify second point or <use settings: Auto = On, Control = [Copy/Reference] <45>: first point as displacement>: All, Combine = Yes, Layer = 34<45 Current positive angle in UCS: Command: Yes ANGDIR=counterclockwise Command: Enter the number of Command: ANGBASE=0 Command: operations to undo or Command: ROTATE Command: [Auto/Control/BEgin/End/Ma Select objects: 1 found Command: rk/Back] <1>: 1 DROPGEOM Current positive angle in UCS: Command: GROUP ANGDIR=counterclockwise Select objects: Command: Command: ANGBASE=0 Command: Command: 1 found Specify base point: Command: Command: Too many objects selected for Command: Command: Specify base point: INTERSECT Command: Too many objects selected for Command: INTERSECT Specify rotation angle or Command: _QSAVE Command: [Copy/Reference] <0>: 42<45 Command: *Cancel* Specify rotation angle or [Copy/Reference] <45>: Command: Command: *Cancel* Too many objects selected for Command: INTERSECT Command: _move Command: Select objects: 1 found Command: Command: Command: ROTATE Command: ROTATE Select objects: 1 found, 2 total Current positive angle in UCS: Current positive angle in UCS: ANGDIR=counterclockwise ANGDIR=counterclockwise Select objects: ANGBASE=0 ANGBASE=0 2 found 1 found Specify base point or [Displacement] Specify base point: Specify base point: <Displacement>: Checking 1225 intersections...