Scribd Logo
Upload

Welcome to Scribd!

  • 62 views

    Introduction To Welding Process

    Uploaded by

    Phani Sridhar Ch
    Welding is a process that joins two metal parts by heating them to the point of melting. There are two main types of welding processes - fusion welding, which melts the parts, and solid-state welding, which joins parts without melting using pressure. Some common fusion welding processes are arc welding, laser beam welding, and electron beam welding. These processes use an electric arc, laser, or electron beam to melt the metal. Solid-state processes like friction welding and ultrasonic welding use pressure and/or vibration to join parts without melting. Welding is widely used in metal fabrication and involves different techniques for preparing and joining metal parts.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Introduction To Welding Process

    Uploaded by

    Phani Sridhar Ch
    62 views5 pages
    Welding is a process that joins two metal parts by heating them to the point of melting. There are two main types of welding processes - fusion welding, which melts the parts, and solid-state welding, which joins parts without melting using pressure. Some common fusion welding processes are arc welding, laser beam welding, and electron beam welding. These processes use an electric arc, laser, or electron beam to melt the metal. Solid-state processes like friction welding and ultrasonic welding use pressure and/or vibration to join parts without melting. Welding is widely used in metal fabrication and involves different techniques for preparing and joining metal parts.

    Original Description:

    lec1

    Original Title

    lec1

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Welding is a process that joins two metal parts by heating them to the point of melting. There are two main types of welding processes - fusion welding, which melts the parts, and solid-state welding, which joins parts without melting using pressure. Some common fusion welding processes are arc welding, laser beam welding, and electron beam welding. These processes use an electric arc, laser, or electron beam to melt the metal. Solid-state processes like friction welding and ultrasonic welding use pressure and/or vibration to join parts without melting. Welding is widely used in metal fabrication and involves different techniques for preparing and joining metal parts.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    62 views5 pages

    Introduction To Welding Process

    Uploaded by

    Phani Sridhar Ch
    Welding is a process that joins two metal parts by heating them to the point of melting. There are two main types of welding processes - fusion welding, which melts the parts, and solid-state welding, which joins parts without melting using pressure. Some common fusion welding processes are arc welding, laser beam welding, and electron beam welding. These processes use an electric arc, laser, or electron beam to melt the metal. Solid-state processes like friction welding and ultrasonic welding use pressure and/or vibration to join parts without melting. Welding is widely used in metal fabrication and involves different techniques for preparing and joining metal parts.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 5

    Introduction to welding process

    Introduction

    Welding is a process in which two or more parts are joined permanently at their touching
    surfaces by a suitable application of heat and/or pressure. Often a filler material is added to
    facilitate coalescence. The assembled parts that are joined by welding are called a weldment.
    Welding is primarily used in metal parts and their alloys.

    Welding processes are classified into two major groups:

    1. Fusion welding: In this process, base metal is melted by means of heat. Often, in
    fusion welding operations, a filler metal is added to the molten pool to facilitate the
    process and provide bulk and strength to the joint. Commonly used fusion welding
    processes are: arc welding, resistance welding, oxyfuel welding, electron beam
    welding and laser beam welding.

    2. Solid-state welding: In this process, joining of parts takes place by application of


    pressure alone or a combination of heat and pressure. No filler metal is used.
    Commonly used solid-state welding processes are: diffusion welding, friction
    welding, ultrasonic welding.

    Arc welding and similar processes

    Arc welding is a method of permanently joining two or more metal parts. It consists of
    combination of different welding processes wherein coalescence is produced by heating with
    an electric arc, (mostly without the application of pressure) and with or without the use of
    filler metals depending upon the base plate thickness. A homogeneous joint is achieved by
    melting and fusing the adjacent portions of the separate parts. The final welded joint has unit
    strength approximately equal to that of the base material. The arc temperature is maintained
    approximately 4400C. A flux material is used to prevent oxidation, which decomposes
    under the heat of welding and releases a gas that shields the arc and the hot metal.The second
    basic method employs an inert or nearly inert gas to form a protective envelope around the
    arc and the weld. Helium, argon, and carbon dioxide are the most commonly used gases.
    Shielded-Metal Arc (SMAW) or Stick Welding

    This is an arc welding process wherein coalescence is produced by heating the workpiece
    with an electric arc setup between a flux-coated electrode and the workpiece. The electrode is
    in a rod form coated with flux. Figure M6.1.1 illustrates the process.

    Figure M6.1.1: Shielded-Metal Arc (SMAW)

    Submerged Arc Welding (SAW)

    This is another type of arc welding process, in which coalescence is produced by heating the
    workpiece with an electric arc setup between the bare electrode and the work piece. Molten
    pool remains completely hidden under a blanket of granular material called flux. The
    electrode is in a wire form and is continuously fed from a reel. Movement of the weld gun,
    dispensing of the flux and picking up of surplus flux granules behind the gun are usually
    automatic.

    Flux-Cored Arc Welding (FCAW)

    This process is similar to the shielded-arc stick welding process with the main difference
    being the flux is inside the welding rod. Tubular, coiled and continuously fed electrode
    containing flux inside the electrode is used, thereby, saving the cost of changing the welding.
    Sometimes, externally supplied gas is used to assist in shielding the arc.

    Gas-Metal Arc Welding (GMAW)

    In this process an inert gas such as argon, helium, carbon dioxide or a mixture of them are
    used to prevent atmospheric contamination of the weld. The shielding gas is allowed to flow
    through the weld gun. The electrode used here is in a wire form, fed continuously at a fixed
    rate. The wire is consumed during the process and thereby provides filler metal. This process
    is illustrated in Figure M6.1.2.
    Figure M6.1.2: Gas-Metal Arc Welding

    Gas-Tungsten Arc Welding (GTAW)

    This process is also known as tungsteninert gas (TIG) welding. This is similar to the Gas-
    Metal Arc Welding process. Difference being the electrode is non consumable and does not
    provide filler metal in this case. A gas shield (usually inert gas) is used as in the GMAW
    process. If the filler metal is required, an auxiliary rod is used.

    Figure M6.1.3: Plasma Arc Welding (PAW)

    Plasma Arc Welding (PAW)

    This process is similar to TIG. A non-consumable electrode is used in this process. Arc
    plasma is a temporary state of gas. The gas gets ionized after the passage of electric current
    and becomes a conductor of electricity. The plasma consists of free electrons, positive ions,
    and neutral particles. Plasma arc welding differs from GTAW welding in the amount of
    ionized gas which is greatly increased in plasma arc welding, and it is this ionized gas that
    provides the heat of welding. This process has been illustrated in Figure M6.1.3.

    Oxyfuel Gas Welding (OFW)

    This process is also known as oxy-acetylene welding. Heat is supplied by the combustion of
    acetylene in a stream of oxygen. Both gases are supplied to the torch through flexible hoses.
    Heat from this torch is lower and far less concentrated than that from an electric arc.

    Resistance welding

    Resistance welding is a group of welding process in which coalescence is produced by the


    heat obtained from the resistance of the work to the flow of electric current in a circuit of
    which the work is a part and by the application of pressure. No filler metal is needed in this
    process.

    Electron-Beam Welding (EBW)

    Electron beam welding is defined as a fusion welding process wherein coalescence is


    produced by the heat obtained from a concentrated beam of high velocity electron. When
    high velocity electrons strike the workpiece, kinetic energy is transformed into thermal
    energy causing localized heating and melting of the weld metal. The electron beam
    generation takes place in a vacuum, and the process works best when the entire operation and
    the workpiece are also in a high vacuum of 10-4torr or lower. However, radiations namely-
    ray, infrared and ultraviolet radiation generates and the welding operator must be protected.

    Laser Beam Welding (LBW)

    Laser beam welding is defined as a fusion welding process and coalescence is achieved by
    utilizing the heat obtained from a concentrated coherent light beam and impinging upon the
    surface to be joined. This process uses the energy in an extremely concentrated beam of
    coherent, mono-chromatic light to melt the weld metal. This process is illustrated in Figure
    M6.1.4.
    Figure M6.1.4: Laser-beam welding.

    Friction Welding (FRW)

    In friction welding (solid state welding process) coalescence is produced by utilizing the heat
    obtained from the mechanically induced rotating motion between the rubbing surfaces. When
    the temperature at the interface of the two parts is sufficiently high, the rotation is stopped
    and increased axial force is applied. This fuses the two parts together. The rotational force is
    provided through a strong motor or a flywheel. In the latter case the process may be called
    inertia welding.

    Other Welding Processes

    Other processes used in the industry are following:

    1. Diffusion bonding (DB): Parts are pressed together at an elevated temperature below
    the melting point for a period of time.

    2. Explosion welding (EXW): The parts to be welded are driven together at an angle by
    means of an explosive charge and fuse together from the friction of the impact.

    3. Ultrasonic welding (USW) for metals: This process utilizes transverse oscillation of
    one part against the other to develop sufficient frictional heat for fusion to occur.

    4. Electro slag (ESW) and Electro gas (EGW) processes: In these processes a molten
    pool of weld metal contained by copper shoes is used to make vertical butt welds in
    heavy plate.

    You might also like