Scribd Logo
Upload

Welcome to Scribd!

  • 123 views

    S355JR

    Uploaded by

    Thanh Nguyen
    1) S355JR is a structural steel grade used for a variety of applications requiring a minimum impact strength of 27J at various temperatures. 2) The chemical composition of S355JR steel includes a maximum of 0.24% carbon, 0.55% silicon, 1.60% manganese, 0.040% phosphorus, and 0.040% sulfur. 3) Mechanical properties of S355JR steel include a minimum yield strength of 315-355 MPa depending on dimensions, a tensile strength of 470-630 MPa, and an elongation of 20-22% depending on dimensions.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    S355JR

    Uploaded by

    Thanh Nguyen
    123 views2 pages
    1) S355JR is a structural steel grade used for a variety of applications requiring a minimum impact strength of 27J at various temperatures. 2) The chemical composition of S355JR steel includes a maximum of 0.24% carbon, 0.55% silicon, 1.60% manganese, 0.040% phosphorus, and 0.040% sulfur. 3) Mechanical properties of S355JR steel include a minimum yield strength of 315-355 MPa depending on dimensions, a tensile strength of 470-630 MPa, and an elongation of 20-22% depending on dimensions.

    Original Description:

    S355JR

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    1) S355JR is a structural steel grade used for a variety of applications requiring a minimum impact strength of 27J at various temperatures. 2) The chemical composition of S355JR steel includes a maximum of 0.24% carbon, 0.55% silicon, 1.60% manganese, 0.040% phosphorus, and 0.040% sulfur. 3) Mechanical properties of S355JR steel include a minimum yield strength of 315-355 MPa depending on dimensions, a tensile strength of 470-630 MPa, and an elongation of 20-22% depending on dimensions.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    123 views2 pages

    S355JR

    Uploaded by

    Thanh Nguyen
    1) S355JR is a structural steel grade used for a variety of applications requiring a minimum impact strength of 27J at various temperatures. 2) The chemical composition of S355JR steel includes a maximum of 0.24% carbon, 0.55% silicon, 1.60% manganese, 0.040% phosphorus, and 0.040% sulfur. 3) Mechanical properties of S355JR steel include a minimum yield strength of 315-355 MPa depending on dimensions, a tensile strength of 470-630 MPa, and an elongation of 20-22% depending on dimensions.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Material data sheet SB S355JR

    Steel grade Last revised: Wed, 02 Nov 2016 08:34:17 GMT

    S355JR All

    General Information
    S355 is a structural micro-alloyed grade used for a great variety of applications. It is standardized with a specified impact strength of 27 J at a few
    different temperatures, but EN10027 gives guidelines how to extend the designation.

    Similar designations
    S355K2 - 15Mn4, S355JR - C16, S355J2 - C16

    Chemical composition
    Variant Cast Weldability C% Si % Mn % P% S% Cu % N%
    CEV 0.52max Min - - - - - - -
    S355JR CC
    Pcm 0.35max Max 0.24 0.55 1.60 0.040 0.040 0.40 0.0120
    CEV 0.52max Min - - - - - - -
    S355JR EN10025-2:2004 CC
    Pcm 0.35max Max 0.24 0.55 1.60 0.035 0.035 0.55 -

    Mechanical Properties
    Variant Condition Format Dimension [mm] Yield strength min [MPa] Tensile strength [MPa] Elongation A5 [%] Hardness Impact (ISO-V) strengthmin
    Flat bar < 16 355** 470-630 22 140-190 HB 20 C 27 J (long)
    Flat bar 16 < 40 345** 470-630 22 140-190 HB 20 C 27 J (long)
    S355JR +AR Flat bar 40 < 63 335** 470-630 21 140-190 HB 20 C 27 J (long)
    Flat bar 63 < 80 325** 470-630 20 140-190 HB 20 C 27 J (long)
    Flat bar 80 < 100 315** 470-630 20 140-190 HB 20 C 27 J (long)
    Rp0.2 * Reh, ** Rel

    Transformation temperatures
    Temperature C
    MS 540
    AC1 720
    AC3 790

    Other properties (typical values)


    Youngs module (GPa) Poissons ratio (-) Shear module (GPa) Density (kg/m3)
    210 0.3 80 7800
    Average CTE 20-300C Specific heat capacity 50/100C Thermal conductivity Ambient Electrical resistivityAmbient temperature
    (m/mK) (J/kgK) temperature (W/mK) (m)
    12 460 - 480 40 - 45 0.20 - 0.25

    Contact us
    Would you like to know more about our offers? Dont hesitate to contact us:
    Via e-mail: [email protected]
    Via telephone: +46 8 622 1300
    For more detailed information please visit http://www.ovako.com/en/Contact-Ovako/
    Disclaimer
    The information in this document is for illustrative purposes only. The data and examples are only general recommendations and not a warranty or a guarantee.
    The suitability of a product for a specific application can be confirmed only by Ovako once given the actual conditions.The purchaser of an Ovako product has
    the responsibility to ascertain and control the applicability of the products before using them. Continuous development may necessitate changes in technical
    data without notice. This document is only valid for Ovako material. Other material, covering the same international specifications, does not necessarily comply
    with the properties presented in this document.

    You might also like