WAGON TIPPLER COMPLEX WAGON TIPPLER COMPLEX WAGON TIPPLER COMPLEX

CRUSHER HOUSE (CH-1)

PENT HOUSE
TP-2 (PH-1)

2
5
DW SW DS CW

TP-3

TP-15

CRUSHED COAL STOCKPILE-1 RECLAIM HOPPER

COMPLEX

CRUSHED COAL STOCKPILE-2

TP-4

CRUSHED COAL STOCKPILE-3 TP-16

CRUSHED COAL STOCKPILE-4

TP-5 PENT HOUSE

PH-2

TP-17

CRUSHED COAL STOCKPILE-5

CRUSHED COAL STOCKPILE-6

TP-7

TP-6

TP-8

TP-9 TP-10 TP-11 TP-12 TP-13 TP-14

UNIT#1 UNIT#2 UNIT#3

Signature Not Verified Digitally signed by PRADEEP

CHANDEKAR
Date: 2014.02.04 12:09:11 IST
Reason: CAT I
Location: NTPCEOC
 ENERGO ENGINEERING PROJECTS LIMITED

COMPLIANCE REPORT Date- 22/01/14

OWNER NTPC

PROJECT KUDGI STPP Phase # 1 (3x800MW)

CONSULTANT DEVELOPMENT CONSULTANTS PRIVATE LTD, KOLKATA

COAL HANDLING PLANT SUPPLIER ENERGO ENGINEERING PROJECTS LTD.

Drawing / Document Title:

Drawing / Document No 9573-155-PVM-L-006
1. FLOW DIAGRAM OF COAL HANDLING PLANT

S.No. NTPC Comment on Rev-0 Reply from DCPL/ENERGO NTPC Reply

1 Show all MCC rooms. Noted & Incorporated in revised drg.

2 Show main CHP control room. Noted & Incorporated in revised drg.

3 Show pump house 1 & 2. Noted & Incorporated in revised drg.

4 Indicate type of wagons to be handled by WT Noted & Incorporated in revised drg.

5 Indicate belt scale for boom conv Noted & Incorporated in revised drg.

6 Include SAC, indicate its haulage capacity in Technical Table. Noted & Incorporated in revised drg.

No. of Flap Gate actuators will be 52 as marked in the drawing, however the quantity of flap gate
7 Indicate 2 nos. of Flap Gate at every 3 way Flap Gate
will be 40. This includes 12nos. 3-way Flap Gates and 28 nos. 2-way Flap gates.

8 Revise the total number of Flap Gate to 52 Noted & Incorporated in revised drg.

9 MCC shall be located outside TP-8 Noted & Incorporated in revised drg.

10 Following points to be added in the notes- Noted & Incorporated in revised drg.

This drg is meant to show only coal flow path & does not indicate comprehensive
a Noted & Incorporated in revised drg.
scope of work.

All the convs will be provided with all accessories such as idlers, drives, belt
b Noted & Incorporated in revised drg.
cleaners, belt switches, tensioning devices as per technical specification.

c ILMS shall be with tramp iron chutes & each TP shall have dust/debris chute. Noted & Incorporated in revised drg.

Complete DS, CW, SW, PW, air conditioning, ventilation shall be as per technical
d Noted & Incorporated in revised drg.
specification.

Scope of supply for TP-9 to TP-14 shall be as per scope mentioned in technical
e Noted & Incorporated in revised drg.
specification.

f PAC, split ACs & window ACs shall be provided as per technical specification. Noted & Incorporated in revised drg.

1 of 1