Rough Terrain Crane Specifications | RT300-1 Series Cranes |

STANDARD BOOM EQUIPMENT

BOOM BOOM HEAD

30-94' (9.23-28.78 m), four section full power, mechanically syn- Welded to fourth section of boom. Four or five load sheaves and two
chronized boom. High-strength four plate construction with side idler sheaves mounted on heavy duty, anti-friction bearings. Quick
plate holes. Anti-friction slide pads. Single boom hoist cylinder. reeving boom head. Provisions made for side-stow jib mounting.
Maximum tip height is 100' (30.48 m).

OPTIONAL BOOM EQUIPMENT

JIBS AUXILIARY BOOM HEAD

32' (9.68 m) side stow swing-on one-piece lattice type jib. Single Removable auxiliary boom head has single sheave mounted on anti-
sheave mounted on anti-friction bearing. Jib is offsettable at 0, 15, friction bearing. Removable pin-type rope guard for quick reeving.
or 30. Maximum tip height is 129' (39.32 m) with 94' (28.49 m) Installs on main boom peak only. Removal is not required for jib use.
boom.
HOOK BLOCK
32-49' (9.68 -14.86 m) side-stow swing-on lattice type jib. Single
sheave mounted on anti-friction bearing. Jib is extendible to 49' Three or four metallic sheaves on anti-friction bearings with hook
(14.86 m) by means of a 17' (5.18m) manual pull-out tip section, and heavy duty hook latch.
roller supported for ease of extension. Jib is offsettable at 0, 15, or
30. Maximum tip height is 147' (44.81 m) with 94' (28.49 m) boom. HOOK AND BALL
7.0 ton (6.3 mt) top swivel ball with hook and hook latch.

410 Stevenson Dr, Bolingbrook, IL 60440 630-972-9199 16675 Van Dam Rd, South Holland IL 60473 219-972-9199
www.stevensoncrane.com
 ROUGH TERRAIN CRANE

RT300-1 SERIES

STANDARD UPPERSTRUCTURE EQUIPMENT

UPPERSTRUCTURE FRAME

All welded one-piece structure fabricated with high tensile strength alloy
steel. Counterweight is removable.

TURNTABLE CONNECTION
CONTROLS
Swing bearing is a single row, ball type, with external teeth. The swing bear-
All control levers and pedals are positioned for efficient operation. Armrest
ing is bolted to both the revolving upperstructure and the carrier.
mounted dual axis controls for winch(s), swing, and boom elevation, winch
rotation indication incorporated into control handles. Armrest swings up to
SWING
improve access and egress. Vernier adjustable hand throttle included.
A hydraulic motor drives a double planetary reduction gear for precise and Steering column mounted turn signal, wiper, and shift controls. Winches
smooth swing function. Swing speed (no load) is 2.8 rpm. include ignition, engine stop, lights, horn, roof window wiper, hot air
defroster, steering mode, parking brake, outriggers, 360 house lock. Horn
SWING BRAKE and winch speed shift switches are mounted in the levers. Foot control ped-
als include swing brake, boom telescope, service brake and accelerator.
Heavy duty multiple disc swing brake is mechanically actuated from opera-
tor's cab by foot pedal. Brake may be locked on or used as a momentary INSTRUMENTATION AND ACCESSORIES
brake.
In-cab gauges include air pressure, bubble level, engine oil pressure, fuel,
RATED CAPACITY INDICATOR engine temperature, voltmeter, transmission temperature and transmission
oil pressure. Indicators include low air, high water temperature, low oil pres-
Rated Capacity Indicator with visual and audible warning system and auto- sure, high transmission temperature and low coolant level audio/visual warn-
matic function disconnects. Second generation pictographic display includes: ing, hoist drum rotation indicator(s) and Rated Capacity Indicator. Accessories
boom radius, boom angle, boom length, allowable load, actual load, and per- include fire extinguisher; light package including headlights, tail light, brake
centage of allowable load registered by bar graph. Operator settable alarms lights, directional signals, four-way hazard flashers, dome light and back-up
provided for swing angle, boom length, boom angle, tip height, and work lights with audible back-up alarm; windshield washer/wiper; skylight wipers;
area exclusion zone. Anti-two block system includes audio/visual warning R.H. and L.H. rear view mirrors; dash lights; and seat belt. Circuit breakers
and automatic function disconnects. protect electrical circuits.

OPERATORS CAB HYDRAULIC CONTROL VALVES

Environmental cab with all steel construction, optimized visibility, tinted safe- Valves are mounted on the rear of the upperstructure and are easily accessi-
ty glass throughout, and rubber floor matting is mounted on vibration absorb- ble. Valves have electric/hydraulic operators and include one pressure com-
ing pads. The cab has a sliding door on the left side, framed sliding window pensated two spool valve for main and auxiliary winch and one single spool
on the right side, hinged tinted all glass skylight and removable front wind- valve for swing. Quick disconnects are provided for ease of installation of
shield to provide optimized visibility of the load open or closed. Acoustical pressure check gauges.
foam padding insulates against sound and weather. The deluxe six-way
adjustable operator's seat is equipped with a mechanical bar suspension and OPTIONAL EQUIPMENT
includes head and arm rests.
Auxiliary Winch, Heater/Defroster, hydraulically powered Air Conditioner with
or without hydraulic heater, LP or Diesel Heater/Defroster, Tachometer, Work
Lights, Rotating Beacon

STANDARD CARRIER EQUIPMENT

CARRIER CHASSIS
High strength chassis with four-wheel drive and four-wheel steer (4x4x4).
Has box beam type construction with reinforcing cross members, a precision
machined turn table mounting plate and integrally welded outrigger boxes.
Decking has anti-skid surfaces, including tool storage compartment, and
access steps and handles left and right side and front and rear corners. 23.5R25 tires 21.00x25 tires
Two-wheel: 36' 10.75" (11.25 m) 36' 8.7" (13.2 m)
AXLES AND SUSPENSION Four-wheel: 20' 4.7" (6.22 m) 24' 7" (7.5 m)
Rear axle is a planetary drive/steer type with automatic oscillation lockouts
that engage when the superstructure is swung 10 in either direction. Front TRANSMISSION
axle is a planetary drive/steer type, rigid mounted to the frame for increased
stability. Range-shift type power-shift transmission with integral torque con-
verter has neutral safety start, six speeds forward and six speeds
STEERING reverse provides wide ration coverage. Automatic pulsating back-up
alarm.
Hydraulic four-wheel power steering for two-wheel, four-wheel, or crab steer
is easily controlled by steering wheel.
 ROUGH TERRAIN CRANE

RT300-1 SERIES

STANDARD CARRIER EQUIPMENT (CONTINUED)

MULTI-POSITION OUT AND DOWN SERVICE BRAKES

OUTRIGGERS Split system air over hydraulic brakes on all four wheels, 18" diameter disc
Fully independent hydraulic outriggers may be utilized fully extended to single caliper brakes on front wheels and single caliper brakes on rear axle.
22(6.71 m) centerline to centerline, in their 1/2 extended position, or fully
retracted for maximum flexibility. Easily removable aluminum floats, each PARKING BRAKE
with an area of 452 in2 (2 919 cm2), stow on the outrigger boxes at their Front axle equipped with spring-set, air released emergency/parking brake.
point of use. Complete controls and a sight leveling bubble are located in the
operators cab. OPTIONAL EQUIPMENT
WHEELS AND TIRES Immersion Heater, Pintle Hook(s), Clearance Lights, Independent Rear
Steering, Four Mode Rear Wheel Steer, 20,000 lb line pull front mounted
Disc type wheels with full tapered bead seat rim. 150.50" (3.82 m) wheel- winch.
base.

TIRES
23.5R25** std., 21.00x25 28 PR opt.

HYDRAULIC SYSTEM

HYDRAULIC PUMPS FILTRATION

Three gear type pumps, one single and two in tandem, driven off the trans- Full flow oil filtration system with bypass protection includes a removable 60
mission. Combined system capability is 119 gpm (450 Ipm). Includes pump mesh (250 micron) suction screen-type filter and 5 micron replaceable return
disconnect. line filter.

Main and auxiliary winch pump HYDRAULIC RESERVOIR

u 59.5 gpm (225.2 Ipm) @ 3,500 psi (246.1 kg/cm2) All steel, welded construction with internal baffles and diffuser. Provides easy
Boom Hoist and Telescope Pump access to filters and is equipped with an external sight level gauge. The
u 38.5 gpm (145.7 Ipm) @ 3,500 psi (246.1 kg/cm2) hydraulic tank is pressurized to aid in keeping out contaminants and in
Power Steering, Outrigger and Swing Pump reducing potential pump cavitation. Capacity is 114 gal (432 liters). Hydraulic
u 21 gpm (79.5 Ipm) @ 2,500 psi (175 kg/cm2) oil cooler is standard.

OPTIONAL HOIST LINE

MAIN WINCH SPECIFICATIONS
Main winch and optional auxiliary winch-5/8' (16mm) rotation resistant
Hydraulic winch with bent axis piston motor and planetary reduction gearing compacted strand 18 x 19 or 19 x 19.
provides 2-speed operation with equal speeds for power up and down. Winch Min. breaking strength 22.6 tons (20.6 mt).
is equipped with an integral automatic brake, grooved drum, tapered flanges,
standard cable roller on drum, and electronic rotation indicator.

Performance LO-Range HI-Range ENGINE SPECIFICATIONS

u Max line speed (no load) Make and Model Cummins QSB5.9 (155 hp)
u First layer 184 fpm (56.1 m/min) 369 fpm (112.5 m/min) u Type 6 cylinder
u Fifth layer 266 fpm (81.1 m/min) 533 fpm (162.5 m/min) u Bore and Stroke 4.02 x 4.72 (102x120 mm)
u
u Max. line pull-first layer 15,639 lb (7 094 kg) 7,298 lb (3 310 kg) Displacement 360 cubic inches (5.91)
u
u
Rated HP 155 hp (116 kw) @ 2500 rpm
u
Max. line pull-fifth layer 10,827 lb (4 911 kg) 5,052 lb (2 292 kg) Maximum HP 160 hp (119 kw) @ 2300 rpm
u
u
Permissible line pull 9,000 lb (4 082 kg) Rated Torque 440 lbft (597 Nm) @ 1500 rpm
u Aspiration turbocharged
Drum Dimensions Drum Capacity u Air Filter dry type
u 10.62" (270 mm) drum diameter Max. Storage: 570' (173.7 m) u Electrical System 12 volt
u 17.55" (446 mm) length 6th layer is not a working layer u Alternator 100 amp
u 18.0" (457 mm) flange dia. Max. useable: 455' (138.7 m)* u Battery (2) 12V-1600 CCA
u Cable: 5/8" x 450' (16 mm x 137.2 m) u Fuel Capacity 50 gal (189 L)
u Cable type: 5/8" (16 mm) 6 x 19 IWRC XIPS, right regular lay, performed.
PERFORMANCE
*Based on minimum flange height above top layer to comply with ANSI B30.5
Trans- Max. Grade-
mission Forward Max. Tractive ability
OPTIONAL AUXILIARY WINCH Gear Drive Speed Effort @ Stall*
u 1 4-wheel 1.5 mph 78,999 lb 240%
Hydraulic 2-speed winch with bent axis piston motor, power up and down, 2.4 km/h 35 800 kg
equal speed, planetary reduction with integral automatic brake, grooved u 2 4-wheel 3.3 mph 38,900 lb 66.8%
drum with tapered flanges, drum roller, and rotation indicator. 5.3 km/h 17 237 kg
u 3 4-wheel 9.0 mph 13,900 lb 19.4%
Performance (Same as main winch) 14.5 km/h 6 309 kg
u 4 2-wheel 4.6 mph 27,165 lb 42.5%
7.4 km/h 12 322 kg
u
Drum Dimensions and Capacity (Same as main winch) 5 2-wheel 9.5 mph 13,029 lb 18%
15.3 km/h 5 910 kg
u 6 2-wheel 24.5 mph 4,768 lb 5.2%
39.4 km/h 2 163 kg
*All performance data is based on a gross vehicle weight of 81,000 lb (36 741 kg).23.5x25 tires, 4x4
drive Performance may vary due to engine performance. Gradeability data is theoretical and is limited
by tire slip, machine stability, or oil pan design.
GENERAL DIMENSIONS
1. Dimensions given assume the boom is fully retracted in travel position and 23.5R25 tires. Add 3.0" (76 mm) for 21.00x25 tires.
2. Minimum ground clearance under: transmission-21.62" (549 mm)
axle bowls-18.65" (474 mm)
3. Approach and departure angles: 23.5R25 21.00x25
Approach angle (A): 22" 26
Departure angle (B): 18" 21

GROSS UPPER FACING GROSS UPPER FACING

WEIGHTS & WEIGHT
WEIGHT FRONT FRONT
AXLE LOADS KG
LB FRONT REAR FRONT REAR
Basic Crane with 10,000 lb (4536 kg) Counterweight 63,260 30,388 32,872 28 694 13 784 14 910
Add Options:
32' (9.68 m) Swing-on jib (Stowed) + 1,368 + 1,814 - 446 + 621 + 823 - 202
32'-49' (9.68 -14.86 m) Swing-on Jib (Stowed) + 1,789 + 2,147 - 358 + 811 + 974 - 163
Auxiliary Boom Head + 100 + 260 - 160 + 45 + 118 - 73
Auxiliary Winch Controls and Plumbing Only + 75 + 0 + 75 + 34 + 0 + 34
Auxiliary Winch with Wire Rope, Controls, Etc. + 264 - 56 + 320 + 120 - 25 + 145
40T (36.3 mt) 4-Sheave Hook Block + 690 + 1,017 - 327 + 313 + 461 - 148
30T (27.2 mt) 3-Sheave Hook Block + 670 + 987 - 317 + 304 + 448 - 144
25T (22.7 mt) 2-Sheave Hook Block + 682 + 1,005 - 323 + 309 + 456 - 147
6.25T Hook and Ball (In tool box) + 240 + 261 - 21 + 109 + 118 - 9
Pintle Hook: Front + 45 + 64 - 19 + 20 + 29 - 9
Rear + 45 - 22 + 67 + 20 - 10 + 30
Substitute:
450' (137.2 m) of 18x19 class spin resistant + 60 - 39 + 99 + 27 + 18 + 45

Note: Weights are for Terex supplied equipment and are subject to 2% variation due to manufacturing tolerances.

TEREX Cranes TEL (319) 352-3920 FAX (319) 352-5727

106-12th Street S.E. EMAIL [email protected]
Waverly, Iowa 50677-9466 USA WEB terex.com
WE RESERVE THE RIGHT TO AMEND THESE SPECIFICATIONS AT ANY TIME WITHOUT NOTICE. THE ONLY WARRANTY APPLICABLE IS OUR STANDARD WRITTEN WARRANTY APPLICABLE TO THE PARTICULAR PRODUCT AND SALE.
WE MAKE NO OTHER WARRANTY, EXPRESSED OR IMPLIED.
TEREX CRANES, INC 2005 PRINTED IN U.S.A FEBRUARY 25, 2005
Range Diagram and Lifting Capacity | RT335-1 Cranes |

35 TON LIFTING CAPACITY

RANGE DIAGRAM 30' - 94' BOOM

DIMENSIONS ARE FOR LARGEST

FACTORY FURNISHED HOOK BLOCK
AND HOOK & BALL, WITH ANTI-TWO
BLOCK ACTIVATED

W/AUX. WINCH 8,900 LB

COUNTER WEIGHT W/O AUX. WINCH 10,000 LB

BOOM LENGTH 30'-94'

OUTRIGGER SPREAD 22'

STABILITY PERCENTAGE ON OUTRIGGERS 85%

ON TIRES 75%

PCSA CLASS 10-156

CRANE WORKING CONDITIONS REDUCTION IN MAIN BOOM CAPACITY

All jib in stowed position 0 lb
Aux. boom in head sheave 100 lb

HOOK BLOCK WEIGHTS

Hook and ball 239 lb
Hook block (3 sheave) 670 lb
Hook block (4 sheave) 690 lb
 ROUGH TERRAIN CRANE

RT335-1

CAUTION: Do not use this specification sheet as a load rating chart. The format of data is not consistent with
LIFTING CAPACITIES the machine chart and may be subject to change

ON OUTRIGGERS - FULLY EXTENDED

BOOM LENGTH 30 BOOM LENGTH 39 BOOM LENGTH 50 USE THESE CHARTS ONLY
LOADED LOADED LOADED WHEN ALL OUTRIGGERS
LOAD BOOM OVER BOOM OVER BOOM OVER LOAD ARE FULLY EXTENDED
RADIUS ANGLE FRONT 360' ANGLE FRONT 360' ANGLE FRONT 360' RADIUS
(FT) (DEG) (LB) (LB) (DEG) (LB) (LB) (DEG) (LS) (LB) (FT)
10 63.0 70,000* 70,000* 69.4 46,600* 46,600* 10
12 58.5 60,800* 60,800* 66.2 46 600* 46,600* 71.7 46,600* 46,600* 12
15 51.4 50,600* 50,600* 61.2 46,600* 46,600* 68.0 44,300* 44,300* 15
20 37.4 36,100* 36,100* 52.3 36,900* 36,900* 61.6 37,500* 37,500* 20
25 13.7 27,300* 27,300* 42.0 28,200* 28,200* 54.8 28,800* 28,800* 25
30 ** 28.8 22,300* 22,300* 47.3 22,900* 22,900* 30
35 ** 38.7 18,800* 18,800* 35
40 27.9 15,600* 15,600* 40
45 7.9 13,100* 13,100* 45
50 ** 50
55 55
60 60
65 65
70 70
75 75
80 80
85 85
90 90

BOOM LENGTH 61 BOOM LENGTH 72 BOOM LENGTH 83 BOOM LENGTH 52'

LOADED LOADED LOADED LOADED
LOAD BOOM OVER BOOM OVER BOOM OVER BOOM OVER LOAD
RADIUS ANGLE FRONT 360 ANGLE FRONT 360 ANGLE FRONT 360 ANGLE FRONT 360 RADIUS
(FT) (DEG) (LB) (LB) (DEG) (LB) (LB) (DEG) (LB) (LB) (DEG) (LB) (LB) (FT)
10 10
12 12
15 72.1 38,100* 38,100* 15
20 67.1 33,000* 33,000* 70.8 27,400* 27,400* 20
25 61.9 27,900* 27,900* 66.5 23,100* 23,100* 69.8 21,800* 21,800* 72.2 1,500* 17,500* 25
30 56.3 23,300* 23,300* 62.0 19,900* 19,900* 66.0 18,300* 18,300* 69.0 15,000* 15,000* 30
35 50.4 19,100* 19,100* 57.4 17,400* 17,400* 62.2 15,900* 15,900* 65.7 13,100* 13,100* 35
40 43.9 16,000* 16,000* 52.5 15,400* 15,400* 58.1 13,800* 13,800* 62.2 11,500* 11,500* 40
45 36.5 13,500* 13,500* 47.2 13,800* 13,800* 53.9 12,100* 12,100* 58.7 10,100* 10,100* 45
50 27.3 11,500* 11,500* 41.4 11,800* 11,800* 49.5 10,900* 10,900* 55.1 9,000* 9,000* 50
55 13.0 9,900* 9,900* 34.8 10,200* 10,200* 44.7 9,700* 9,700* 51.2 8,200* 8,200* 55
60 ** 26.9 8,800* 8,800* 39.5 8,800* 8,800* 47.2 7,300* 7,300* 60
65 15.5 7,700* 7,700 33.6 7,900* 7,800 42.8 6,600* 6,600* 65
70 ** 26.6 6,900 6,800 38.0 6,000* 6,000* 70
75 17.0 5,900 5,800 32.7 5,500* 5,500* 75
80 ** 26.4 5,000* 5,000* 80
85 18.1 4,600 4,500 85
90 ** 90

**MAXIMUM CAPACITY AT 0 DEGREE BOOM ANGLE

BOOM LENGTH 30' BOOM LENGTH 39' BOOM LENGTH 50' BOOM LENGTH 61' BOOM LENGTH 72' BOOM LENGTH 83' BOOM LENGTH 94'
LOAD OVER LOAD OVER LOAD OVER LOAD OVER LOAD OVER LOAD OVER LOAD OVER
RADIUS FRONT 360 RADIUS FRONT 360 RADIUS FRONT 360 RADIUS FRONT 360 RADIUS FRONT 360 RADIUS FRONT 360 RADIUS FRONT 360
(FT) (LB) (LB) (FT) (LB) (LB) (FT) (LB) (LB) (FT) (LB) (LB) (FT) (LB) (LB) (FT) (LB) (LB) (FT) (LB) (LB)
25.6 26,300 26,300 34.3 18,500 18,500 45.3 12,900 12,900 56.3 9,500 9,500 67.3 7,200 7,100 78.3 5,300 5,200 89.3 4,000 3,900
 ROUGH TERRAIN CRANE

RT335-1

CAUTION: Do not use this specification sheet as a load rating chart. The format of data is not consistent with
LIFTING CAPACITIES the machine chart and may be subject to change

ON OUTRIGGERS - MID POSITION

BOOM LENGTH 30' BOOM LENGTH 39' BOOM LENGTH 50'
LOADED LOADED LOADED
LOAD BOOM BOOM BOOM LOAD
RADIUS ANGLE 360 ANGLE 360 ANGLE 360' RADIUS
(FT) (DEG (LB) (DEG) (LB) DEG (LB) (FT)

10 63.0 70,000* 69.4 46,600* 10

12 58.5 60,800* 66.2 46,600* 71.7 46,600* 12 USE THESE CHARTS ONLY WHEN
15 51.4 50,600* 61.2 46,600* 68.0 44,300* 15 ALL OUTRIGGERS ARE PINNED IN
20 37.4 33,000 52.3 33,800 61.6 34,300 20 MID POSITION
25 13.7 21,200 42.0 22,400 54.8 22,800 25
30 ** 28.8 15,900 47.3 16,500 30
35 ** 38.7 12,500 35
40 27.9 9,600 40
45 7.9 7,400 45
50 ** 50
55 55
60 60
65 65
70 70
75 75
80 80
85 85
90 90

BOOM LENGTH 61' BOOM LENGTH 72' BOOM LENGTH 83' BOOM LENGTH 94'
LOADED LOADED LOADED LOADED
LOAD BOOM BOOM BOOM BOOM LOAD
RADIUS ANGLE 360 ANGLE 360 ANGLE 360 ANGLE 360 RADIUS
(FT) (DEG) (LB) (DEG) (LB) (DEG) (LB) (DEG) (LB) (FT)
10 10
12 12
15 72.1 38,100* 15
20 67.1 33,000* 70.8 27,400* 20
25 61.9 23,100 66.5 23,100* 69.8 21,800* 72.2 17,500* 25
30 56.3 16,800 62.0 17,000 66.0 17,100 69.0 15,000* 30
35 50.4 12,800 57.4 12,900 62.2 13,100 65.7 13,100* 35
40 43.9 10,000 52.5 10,200 58.1 10,300 62.2 10,400 40
45 36.5 7,900 47.2 8,100 53.9 8,300 58.7 8,300 45
50 27.3 6,300 41.4 6,600 49.5 6,700 55.1 6,800 50
55 13.0 5,000 34.8 5,300 44.7 5,500 51.2 5,600 55
60 ** 26.9 4,300 39.5 4,500 47.2 4,600 60
65 15.5 3,400 33.6 3,600 42.8 3,700 65
70 ** 26.6 2,900 38.0 3,000 70
75 17.0 2,300 32.7 2,400 75
80 ** 26.4 1,900 80
85 18.1 1,400 85
90 ** 90

**MAXIMUM CAPACITY AT 0 DEGREE BOOM ANGLE

BOOM LENGTH 30 BOOM LENGTH 39 BOOM LENGTH 50 BOOM LENGTH 61 BOOM LENGTH 72 BOOM LENGTH 83 BOOM LENGTH 94'

LOAD LOAD LOAD LOAD LOAD LOAD LOAD

RADIUS 360 RADIUS 360 RADIUS 360 RADIUS 360 RADIUS 360 RADIUS 360 RADIUS 360
(FT) (LB) (FT) (LB) (FT) (LB) (FT) (LB) (FT) (LB) (FT) (LB) (FT) (LB)

25.6 20,100 34.3 12,100 45.3 7,300 56.3 4,700 67.3 3,000 78.3 1,900 89.3 1,000
 ROUGH TERRAIN CRANE

RT335-1

CAUTION: Do not use this specification sheet as a load rating chart. The format of data is not consistent with
LIFTING CAPACITIES the machine chart and may be subject to change

ON OUTRIGGERS - RETRACTED
BOOM LENGTH 30' BOOM LENGTH 39' BOOM LENGTH 50'
LOADED LOADED LOADED
LOAD BOOM BOOM BOOM LOAD
USE THESE CHARTS WHEN ALL
RADIUS ANGLE 360 ANGLE 360 ANGLE 360' RADIUS
OUTRIGGER BEAMS ARE NOT IN
(FT) (DEG (LB) (DEG) (LB) DEG (LB) (FT)
EITHER THE MID OR FULLY
10 63.0 51,000 69.4 46,600* 10 EXTENDED POSITION
12 58.5 35 800 66.2 36,500 71.7 37,100 12
15 51.4 23,800 61.2 24,500 68.0 25,000 15
20 37.4 14,000 52.3 14,800 61.6 15,300 20
25 13.7 8,800 42.0 9,800 54.8 10,400 25
30 ** 28.8 6,700 47.3 7,300 30
35 ** 38.7 5,200 35
40 27.9 3,700 40
45 7.9 2,400 45
50 ** 50
55 55
60 60

BOOM LENGTH 61' BOOM LENGTH 72' BOOM LENGTH 83' BOOM LENGTH 94'
LOADED LOADED LOADED LOADED
LOAD BOOM BOOM BOOM BOOM LOAD
RADIUS ANGLE 360 ANGLE 360 ANGLE 360 ANGLE 360 RADIUS
(FT) (DEG) (LB) (DEG) (LB) (DEG) (LB) (DEG) (LB) (FT)

10 10
12 12
15 72.1 25,300 15
20 67.1 15,600 70.8 15,800 20
25 61.9 10,600 66.5 10,800 69.8 10,900 72.2 11,000 25
30 56.3 7,600 62.0 7,800 66.0 7,900 69.0 8,000 30
35 50.4 5,500 57.4 5,700 62.2 5,800 65.7 5,900 35
40 43.9 4,000 52.5 4,200 58.1 4,400 62.2 4,500 40
45 36.5 2,900 47.2 3,100 53.9 3,300 58.7 3,400 45
50 27.3 2,000 41.4 2,200 49.5 2,400 55.1 2,500 50
55 13.0 1,200 34.8 1,500 44.7 1,700 51.2 1,800 55
60 ** 26.9 900 39.5 1,100 47.2 1,200 60

**MAXIMUM CAPACITY AT 0 DEGREE BOOM ANGLE

BOOM LENGTH 30 BOOM LENGTH 39 BOOM LENGTH 50 BOOM LENGTH 61 BOOM LENGTH 72 BOOM LENGTH 83 BOOM LENGTH 94'

LOAD LOAD LOAD LOAD LOAD LOAD LOAD

RADIUS 360 RADIUS 360 RADIUS 360 RADIUS 360 RADIUS 360 RADIUS 360 RADIUS 360
(FT) (LB) (FT) (LB) (FT) (LB) (FT) (LB) (FT) (LB) (FT) (LB) (FT) (LB)

25.6 8,200 34.3 4,700 45.3 2,300 56.3 1,000

 ROUGH TERRAIN CRANE

RT335-1

CAUTION: Do not use this specification sheet as a load rating chart. The format of data is not consistent with
LIFTING CAPACITIES the machine chart and may be subject to change

SIDE STOW JIB ON FULLY EXTENDED OUTRIGGERS

26' OFFSETTABLE JIB/NO PULL OUT INSTALLED 43' OFFSETTABLE JIB/PULL OUT RETRACTED
0 OFFSET 15 OFFSET 30 OFFSET 0 OFFSET 15 OFFSET 30 OFFSET
LOADED LOAD LOAD LOAD LOAD LOAD LOAD LOADED
BOOM RADIUS RADIUS RADIUS RADIUS RADIUS RADIUS BOOM
ANGLE (REI) 360 (REI) 360 (REI) 360 (REI) 360 (REI) 360 (REI) 360 ANGLE
(DEG) (FT) (LB) (FT) (LB) (FT) (LB) (FT) (LB) (FT) (LB) (FT) (LB) (DEG)

75 38 9,100* 46 7,700* 52 5,900* 41 5,100* 55 3,400* 62 2,700* 75

73 42 8,600* 49 7,300* 55 5,800* 47 4,800* 59 3,300* 68 2,700* 73
71 45 8,200* 52 7,000* 58 5,600* 52 4,500* 64 3,200* 73 2,600* 71
68 50 7,800* 58 6,200* 63 5,100* 60 4,100* 70 3,000* 79 2,500* 68
65 56 6,700* 63 5,500* 68 4,600* 66 3,800* 76 2,900* 84 2,500* 65
62 61 5,900* 68 4,900* 73 4,200* 71 3,600* 81 2,800* 88 2,400* 62
59 66 5,200* 73 4,400* 77 3,800* 77 3,400* 86 2,700* 93 2,400* 59
55 73 4,400* 79 3,900* 83 3,400* 84 3,100* 93 2,600* 99 2,300* 55
51 79 3,800* 85 3,400* 88 3,100* 91 2,900* 99 2,500* 105 2,300* 51
47 86 3,300* 91 3,000* 94 2,800* 100 2,800* 106 2,400* 110 2,200* 47
43 92 2,900* 97 2,700* 99 2,500* 109 2,400* 112 2,200* 116 2,000* 43
38 100 2,400* 103 2,300* 105 2,200* 116 2,100* 119 1,900* 122 1,800* 38
32 106 2,100* 109 2,000* 110 1,900* 122 1,800* 126 1,600* 127 1,500* 32
25 113 1,700* 114 1,700* 129 1,500* 131 1,400* 25
17 118 1,500* 118 1,500* 133 1,300* 135 1,200* 17
0 121 1,200* 138 1,000* 0

Notes For Jib Capacities:

A. For all boom lengths less than the maximum with a jib erected, the rated loads are determined by boom angle only In the appropriate column.
B. For boom angle not shown, use the capacity of the next lower boom angle.
C. Listed radii are for extended main boom only.

ON TIRES
MAX 23.5R25** 21:00 X 25-28PR Notes For On Tire Capacities:
BOOM PICK & CARRY PICK & CARRY
A. For Pick and Carry operations, boom must be
RADIUS LENGTH STATIONARY CREEP 2.5 MPH STATIONARY CREEP 2.5 MPH centered over the front of the crane with swing
(FT) (FT) 360 STRAIGHT OVER FRONT 360 STRAIGHT OVER FRONT brake and lock engaged. Use minimum boom
10 30 30,900 63,700* 46,700* 39,000* 30,500 73,700* 56,000* 47,400* point height and keep load close to ground surface.
12 30 24,900 55,500 40,600* 33,800* 25,400 64,500* 48,900* 41,200*
B. The load should be restrained from swinging.
15 39 19,100 43,100 33,600* 27,800* 18,900 46,800 40,700* 34,100* NO ON TIRE OPERATION WITH JIB ERECTED.
20 39 12,400 24,600 24,600 20,900* 11,600 24,900 24,900 24,900
25 50 8,400 16,400 16,400 16,100 7,600 16,500 16,500 16,500 C. Without outriggers, never maneuver the boom
30 50 5,600 12,500 12,500 12,500 5,200 12,600 12,600 12,600 beyond listed load radii for applicable tires to
ensure stability.
35 50 4,300 9,600 9,600 9,600 3,900 9,600 9,600 9,600
40 61 3,000 7,500 7,500 7,500 2,800 7,600 7,600 7,600 D. Creep speed is crane movement of less than
45 61 2,300 6,100 6,100 6,100 2,100 6,200 6,200 6,200 200' (61m) in a 30 minute period and not
50 61 1,600 5,000 5,000 5,000 1,400 5,200 5,200 5,200 exceeding 1.0 mph (1.6 km/h).
55 61 4,300 4,300 4,300 4,300 4,300 4,300 E. Refer General Notes for additional information.
60 72 3,500 3,500 3,500 3,600 3,600 3,600
65 72 2,800 2,800 2,800 2,800 2,800 2,800
70 83 2,200 2,200 2,200 2,200 2,200 2,200
75 83 1,800 1,800 1,800 1,900 1,900 1,900
80 94 1,500 1,500 1,500 1,500 1,500 1,500

RECOMMENDED TIRE PRESSURE

TIRE SIZE STATIONARY CREEP 2 1/2 MPH TRAVEL
23.5R25.** 24 PSI 94 PSI 94 PSI 76 PSI
21.00 x 25-28 PR 85 PSI 85 PSI 85 PSI 65 PSI

MAXIMUM PERMISSIBLE HOIST LINE LOAD

LINE PARTS 1 2 3 4 5 6 7 8
MAX. LOAD 9,080 18,160 27,240 36,320 45,400 54,480 65,560 72,640
BOOM HEAD 2 3-D 2-3 1-4-D 2-3-4 2-3-4-D 1-2-3-4 1-2-3-4-D
HOOK BLOCK 0 3 3-D 1-4 2-3-D 2-3-4 2-3-4-D 1-2-3-4
WIRE ROPE: 5/8' ROTATION RESISTANT COMPACTED STRAND, 18X19
OR 19X19 MINIMUM BREAKING STRENGTH - 22.7 TONS

5/8' 6X19 OR 6X37 IWPC IPS PREFORMED RIGHT

REGULAR LAY MINIMUM BREAKING STRENGTH - 17.9 TONS
General Notes | RT300 Series Cranes |
GENERAL OPERATION
1. Rated loads as shown on Lift Charts pertain to this machine as originally manufac- 1. CRANE LOAD RATINGS MUST NOT BE EXCEEDED. DO NOT ATTEMPT TO TIP THE
tured and equipped. Modifications to the machine or use of optional equipment or CRANE TO DETERMINE ALLOWABLE LOADS.
other than that specified can result in a reduction of capacity. 2. When either radius or boom length, or both, are between listed values, the smaller
2. Construction equipment can be hazardous if improperly operated or maintained. of the two listed load ratings shall be used.
Operation and maintenance of this machine shall be in compliance with the infor- 3. Do not operate at longer radii than those listed on the applicable load rating chart
mation in the Operators, Parts and Safety Manuals supplied with this machine. If (cross hatched areas shown on range diagrams.)
These manuals are missing, order replacements from the manufacturer through 4. The boom angles shown on the Capacity Chart give an approximation of the operat-
your distributor. ing radius for a specified boom length.The boom angle, before loading, should be
3. These warnings to not constitute all of the operating conditions for the crane. The greater to account for boom deflection. It may be necessary to retract the boom if
operator and job site supervision must read the OPERATORS MANUAL, CIMA SAFE- maximum boom angle is insufficient to maintain rated radius.
TY MANUAL, APPLICABLE OSHA REGULATIONS, AND SOCIETY OF MECHANICAL 5. Power telescoping boom sections must be extended equally.
ENGINEERS (ASME) SAFETY STANDINGS FOR CRANES. 6. Rated loads include the weight of hook block, slings, and auxiliary lifting devices.
4. This crane and its load ratings are in accordance with POWER CRANE & SHOVEL Their weights shall be subtracted from the listed rated load to obtain the net load
ASSOCIATION, STANDARD NO.4 SAE CRANE LOAD STABILITY TEST CODE J765A, that can be lifted. When lifting over the jib the weight of any hook block, slings, and
SAE METHOD OF TEST FOR CRANE STRUCTURE J1063 AND APPLICABLE SAFETY auxiliary lifting devices at the boom head must be added to the load. When jibs are
CODE FOR CRANES, DERRICKS AND HOISTS, ASME/ANSI B30.5 erected but unused add two (2) times the weight of any hook block, slings, and
auxiliary lifting devices at the jib head to the load.
DEFINITIONS 7. Rated loads do not exceed 85% on outriggers or 75% on tires, of the tipping load
1. LOAD RADIUS - The horizontal distance from the axis of rotation before loading to as determined by SAE Crane Stability Test Code J765a. Structural strength ratings
the center of the vertical hoist line or tackle with a load applied. in chart are indicated with an asterisk (*).
2. LOADED BOOM ANGLE - It is the angle between the boom base section and the hor- 8. Rated loads are based on freely suspended loads. No attempt shall be made to drag
izontal, after lifting the rated load at the rated radius. the boom angle before loading a load horizontally on the ground in any direction.
should be greater to account for deflections. The loaded boom angle combined with 9. The user shall operate at reduced ratings to allow for adverse job conditions, such
boom length give only an approximation of the operating radius. as: soft or uneven ground, out of level conditions, high winds, side loads, pendulum
3. WORKING AREA - Areas measured in a circular arc about the centerline of rotation action, jerking or sudden stopping of loads, hazardous conditions, experience of
as shown in the diagram. personnel, two machine lifts, traveling with loads, electric wires, etc. (side pull on
4. FREELY SUSPENDED LOAD - Load hanging free with no direct external force applied boom or jib is hazardous). Derating of the cranes lifting capacity is required when
except by the hoist rope. wind speed exceeds 20 MPH. The center of the lifted load must never be allowed to
5. SIDE LOAD - Horizontal force applied to he lifted load either on the ground or in the move more then 3* off the center line of the base boom section due to the effects
air. of wind, inertia, or any combination of the two.
6. NO LOAD STABILITY LIMIT - The stability limit radius shown on the range diagrams *"Use 2' off the center line of the base boom for a two section boom, 3' for a there
is the radius beyond which it is not permitted to position the boom, when the boom section boom, or 4 for a four section boom.
angle is less than the minimum shown on the applicable load chart, because the 10. The maximum load which can be telescoped is not definable, because of variations
machine can overturn without any load. in loadings and crane maintenance, but it is permissible to attempt retraction and
7. BOOM SIDE OF CRANE - The side of the crane over which the boom is positions extension if load ratings are not exceeded.
when in OVER SIDE working position. 11. Load ratings are dependent upon the crane being maintained according to manu-
facturer's specifications.
SET-UP 12. It is recommended that load handling devices, including hooks, and hook blocks, be
1. Crane load ratings are based on the crane being leveled and standing on a firm, kept away from boom head at all times.
uniform supporting surface. 13. FOR TRUCK CRANES ONLY: 360 capacities apply only to machines equipped with a
2. Crane load ratings on outriggers are based on all outrigger beams being fully front outrigger jack and all five(5) outrigger jacks properly set. If the front (5th) out-
extended or in the case of partial extension ratings mechanically pinned in the rigger jack is not properly set, the work area is restricted to the over side and over
appropriate position, and the tires free of the supporting surface. rear ares as shown on the Crane Working Positions diagram. Use the 360 load rat-
3. Crane load ratings on tires depend on appropriate inflation pressure and the tire ings in the overside work areas.
conditions. Caution must be exercised when increasing air pressures in tires. 14. Do not lift with outrigger beams positioned between the fully extended and interme-
Consult Operators Manual for precautions. diate (pinned) positions.
4. Use of jibs, lattice-type boom extensions, or fourth section pullouts extended is not 15. Truck Cranes not equipped with equalizing (bogie) beams between the rear axles
permitted for pick and carry operations. may not be used for lifting on tires. Truck Cranes equipped with equalizing beams
5. Consult appropriate section of the Operators and Service Manual for more exact and rear air suspension should dump the air before lifting on tires.
description of hoist line reeving.
6. The use of more parts of line than required by the load may result in having insuffi- CLAMSHELL, MAGNET, AND CONCRETE BUCKET SERVICE
cient rope to allow the hook block to reach the ground. 1. Maximum boom length for clamshell and magnet service is 50'.
7. Properly maintained wire rope is essential for save crane operation. Consult 2. Weight of clamshell or magnet, plus contents are not to exceed 6,000 lb or 90% of
Operators Manual for proper maintenance and inspection requirements. rated lifting capacities, whichever is less. For concrete bucket operation, weight of
8. When spin-resistant wire rope is used, the allowable rope loading shall be the bucket and load must not exceed 90% of rated lifting capacity.
breaking strength divided by five (5), unless otherwise specified by the wire rope
manufacturer.
9. Do not elevate the boom above 60 unless the boom is positioned in-line with the
cranes chassis or the outrigger are extended. Failure to observe this warning may
result in loss of stability.

TEREX Cranes TEL (319) 352-3920 FAX (319) 352-5727

106-12th Street S.E. EMAIL [email protected]
Waverly, Iowa 50677-9466 USA WEB terex.com
WE RESERVE THE RIGHT TO AMEND THESE SPECIFICATIONS AT ANY TIME WITHOUT NOTICE. THE ONLY WARRANTY APPLICABLE IS OUR STANDARD WRITTEN WARRANTY APPLICABLE TO THE PARTICULAR PRODUCT AND SALE.
WE MAKE NO OTHER WARRANTY, EXPRESSED OR IMPLIED.
TEREX CRANES, INC 2005 PRINTED IN U.S.A MARCH 7, 2005