The Three Software

Stacks Required for IoT

Architectures
IoT software requirements and how to implement them
using open source technology

A collaboration of the Eclipse IoT Working Group

September 2016
Contents

Contents

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
IoT Architectures . . . . . . . . . . . . . . . . . . . . . . . . . 5
Stack for Constrained Devices . . . . . . . . . . . . . . . . . 6
Stack for Gateways . . . . . . . . . . . . . . . . . . . . . . . 6
Stack for IoT Cloud Platforms . . . . . . . . . . . . . . . . . 7
Cross-Stack Functionality . . . . . . . . . . . . . . . . . . . . 8
Key Characteristics for IoT Stacks . . . . . . . . . . . . . . . 9
Open Source Technology for IoT . . . . . . . . . . . . . . . .11
Open Source Stack for Constrained Devices . . . . . . . . 12
Open Source Stack for Gateways . . . . . . . . . . . . . . . 12
Open Source Stack for IoT Cloud Platforms . . . . . . . . . 14
Open Source for Cross-Stack Functionality . . . . . . . . . 15
Conclusion . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

2 Copyright 2016 The Eclipse Foundation. All Rights Reserved

Introduction

T
he Internet of Things (IoT) is transforming how individuals and
organizations connect with customers, suppliers, partners,
and other individuals. IoT is all about connecting sensors,
actuators, and devices to a network and enabling the collection,
exchange, and analysis of generated information.

Technology innovations in Hardware innovations, like the Raspberry Pi, are making it easier,
hardware, networking and faster and cheaper to develop new devices. Networking standards
software are fueling the for low power networks, like LoRaWAN or Sigfox, create new op-
opportunity for new IoT portunities for connecting very small devices to a network. New
solutions and use cases standards are being developed specifically for IoT use cases, like
MQTT for messaging, or OMA Lightweight M2M for device manage-
ment. And finally, significant improvements in data storage, data
analysis, and event processing are making it possible to support
the amount of data generated in large-scale IoT deployments.

In parallel to the emerging IoT industry, the general software in-

dustry has moved towards open source as being a key supplier of
critical software components. The phrase software is eating the
world reflects the importance of software in general, but in real-
ity the software industry is now dominated by open source. This
is true for key software categories, including Operating Systems
(Linux), Big Data (Apache Hadoop, Apache Cassandra), Middleware
(Apache HTTP Server, Apache Tomcat, Eclipse Jetty), Cloud (Open-
Stack, Cloud Foundry, Kubernetes), and Microservices (Docker).
Software is eating the world
Marc Andreessen
The purpose of this white paper is to look at the new technology
requirements and architectures required for IoT solutions. It will
identify three stacks of software required by any IoT solution, and
finally present how open source communities, such as the Eclipse
IoT community, are already supplying the critical software technol-
ogy needed by IoT solution providers. Similar to how the LAMP
(Linux/Apache HTTP Server/MySQL/PHP) stack has dominated the
web infrastructures, it is believed a similar open source stack will
dominate IoT deployments.

3 Copyright 2016 The Eclipse Foundation. All Rights Reserved

IoT Architectures
Devices, Gateways, and IoT Platforms
IoT Architectures

A typical IoT solution is characterized by many devices (i.e. things)

that may use some form of gateway to communicate through a
network to an enterprise back-end server that is running an IoT
platform that helps integrate the IoT information into the existing
enterprise. The roles of the devices, gateways, and cloud platform
are well defined, and each of them provides specific features and
functionality required by any robust IoT solution.

5 Copyright 2016 The Eclipse Foundation. All Rights Reserved

IoT Architectures

Stack for Constrained Devices

Sensors and Actuators

The Thing in the IoT is the starting point for an IoT solution. It
is typically the originator of the data, and it interacts with the
physical world. Things are often very constrained in terms of size
or power supply; therefore, they are often programmed using
microcontrollers (MCU) that have very limited capabilities. The
microcontrollers powering IoT devices are specialized for a specific
task and are designed for mass production and low cost.

The software running on MCU-based devices aims at supporting

specific tasks. The key features of the software stack running on
a device may include
1. IoT Operating System many devices will run with bare
metal, but some will have embedded or real-time operating
systems that are particularly suited for small constrained
devices, and that can provide IoT-specific capabilities.
2. Hardware Abstraction a software layer that enables
access to the hardware features of the MCU, such as flash
Software stack for constrained devices
memory, GPIOs, serial interfaces, etc.
3. Communication Support drivers and protocols allow-
ing to connect the device to a wired or wireless protocol like
Bluetooth, Z-Wave, Thread, CAN bus, MQTT, CoAP, etc., and
enabling device communication.
4. Remote Management the ability to remotely control the
device to upgrade its firmware or to monitor its battery level.

Stack for Gateways

Connected and Smart Things

The IoT gateway acts as the aggregation point for a group of sen-
sors and actuators to coordinate the connectivity of these devices
to each other and to an external network. An IoT gateway can be
a physical piece of hardware or functionality that is incorporated
into a larger Thing that is connected to the network. For example,
an industrial machine might act like a gateway, and so might a
connected automobile or a home automation appliance.

An IoT gateway will often offer processing of the data at the

edge and storage capabilities to deal with network latency and
reliability. For device to device connectivity, an IoT gateway deals
with the interoperability issues between incompatible devices. A
typical IoT architecture would have many IoT gateways supporting
masses of devices.

6 Copyright 2016 The Eclipse Foundation. All Rights Reserved

IoT Architectures

IoT gateways are becoming increasingly dependant on software

to implement the core functionality. The key features of a gateway
software stack include
1. Operating System typically a general purpose operating
system such as Linux.
2. Application Container or Runtime Environment IoT
gateways will often have the ability to run application code,
and to allow the applications to be dynamically updated.
For example, a gateway may have support for Java, Python,
or Node.js.
3. Communication and Connectivity IoT gateways need
to support different connectivity protocols to connect with
Software stack for gateways different devices (e.g. Bluetooth, Wi-Fi, Z-Wave, ZigBee). IoT
gateways also need to connect to different types of networks
(e.g. Ethernet, cellular, Wi-Fi, satellite, etc.) and ensure the
reliability, security, and confidentiality of the communications.
4. Data Management & Messaging local persistence to
support network latency, offline mode, and real-time analyt-
ics at the edge, as well as the ability to forward device data
in a consistent manner to an IoT Platform.
5. Remote Management the ability to remotely provision,
configure, startup/shutdown gateways as well as the applica-
tions running on the gateways.

Stack for IoT Cloud Platforms

The IoT Cloud Platform represents the software infrastructure and
services required to enable an IoT solution. An IoT Cloud Platform
typically operates on a cloud infrastructure (e.g. OpenShift, AWS,
Microsoft Azure, Cloud Foundry) or inside an enterprise data
center and is expected to scale both horizontally, to support the
large number of devices connected, as well as vertically to address
the variety of IoT solutions. The IoT Cloud Platform will facilitate
the interoperability of the IoT solution with existing enterprise
applications and other IoT solutions.

The core features of an IoT Cloud Platform include

1. Connectivity and Message Routing IoT platforms need
to be able to interact with very large numbers of devices
and gateways using different protocols and data formats,
but then normalize it to allow for easy integration into the
rest of the enterprise.
2. Device Management and Device Registry a central
registry to identify the devices/gateways running in an IoT
solution and the ability to provision new software updates
and manage the devices.
3. Data Management and Storage a scalable data store
Software stack for IoT Cloud Platforms that supports the volume and variety of IoT data.

7 Copyright 2016 The Eclipse Foundation. All Rights Reserved

IoT Architectures

4. Event Management, Analytics & UI scalable event pro-

cessing capabilities, ability to consolidate and analyze data,
and to create reports, graphs, and dashboards.
5. Application Enablement ability to create reports, graphs,
dashboards, and to use API for application integration.

Cross-Stack Functionality
Across the different stacks of an IoT solution are a number of fea-
tures that need to be considered for any IoT architecture, including
1. Security Security needs to be implemented from the
devices to the cloud. Features such as authentication, encryp-
tion, and authorization need be part of each stack.
2. Ontologies The format and description of device data
is an important feature to enable data analytics and data
interoperability. The ability to define ontologies and meta-
data across heterogeneous domains is a key area for IoT.
3. Development Tools and SDKs IoT Developers will require
development tools that support the different hardware and
software platforms involved.

Event Management,
Analytics & UI

8 Copyright 2016 The Eclipse Foundation. All Rights Reserved

Key Characteristics for IoT Stacks

There are some common characteristics that each IoT stack should
embrace, including:

Loosely coupled - Three IoT stacks have been defined but it

is important that each stack can be used independently of the
other stacks. It should be possible to use an IoT Cloud Platform
from one supplier with an IoT gateway from another supplier
and a third supplier for the device stack.

Modular - Each stack should allow for the features to be sourced

from different suppliers.

Platform-independent - Each stack should be independent of

the host hardware and cloud infrastructure. For instance, the
device stack should be available on multiple MCUs and the IoT
Cloud Platform should run on different Cloud PaaS.

Based on open standards - Communication between the stacks

should be based on open standards to ensure interoperability.

Defined APIs - Each stack should have defined APIs that allow
for easy integration with existing applications and integration
with other IoT solutions.

9 Copyright 2016 The Eclipse Foundation. All Rights Reserved

 Open Source
Technology for IoT
Open Source Technology for IoT

The open source community has become an active producer of

technology for IoT solutions. Like the LAMP stack for websites, there
are a set of open source projects that can be used as the building
blocks for an IoT solution architecture.

The Eclipse IoT community is very active in providing the technology

that can be used in each stack of an IoT solution. Eclipse IoT has 26
different open source projects that address different features of the
IoT stacks. In addition to the Eclipse IoT projects, there are other
open source projects that are also relevant to an IoT stack. The next
few pages provide a brief summary of how Eclipse IoT as well as
other open source projects can be used to implement IoT stacks.

11 Copyright 2016 The Eclipse Foundation. All Rights Reserved

Open Source Technology for IoT

Open Source Stack for

Constrained Devices
Eclipse IoT provides a set of libraries that can be deployed on a
constrained embedded device to provide a complete IoT develop-
ment stack.
IoT Operating Systems RIOT, FreeRTOS, Zephyr, Apache
Mynewt.
Hardware Abstraction Eclipse Edje provides an high-level
API for accessing hardware features provided by microcon-
trollers (e.g GPIO, ADC, MEMS, etc.). It can directly connect
to native libraries, drivers, and board support packages
provided by silicon vendors.
Device Management Eclipse Wakaama provides an
implementation of the OMA LWM2M standard.
Communication Open source projects like Eclipse Paho
or Eclipse Wakaama provide implementation of IoT com-
munication protocols such as, respectively, MQTT or LWM2M.

Open Source Stack for Gateways

Within the Eclipse IoT community there are a variety of projects
that work to provide the capabilities that an IoT gateway requires.

Eclipse Kura provides a general purpose middleware and appli-

cation container for IoT gateway services. An IoT gateway stack
based on Eclipse Kura would include the following:
Operating System Linux (Ubuntu/Ubuntu Core, Yocto-
based linux distribution), Windows.
Application Container or Runtime Environment Eclipse
Equinox or Eclipse Concierge (OSGi Runtime).
Communication and Connectivity Eclipse Kura includes
APIs to interface with the gateway I/Os (e.g. Serial, RS-485,
BLE, GPIO, etc.) and support for many field protocols that can
be used to connect to devices, e.g MODBUS, CAN bus, etc.
Network Management Eclipse Kura provides advanced
networking and routing capabilities over a wide-range of
interfaces (cellular, Wi-Fi, Ethernet, etc.).
Data management & Messaging Eclipse Kura implements
a native MQTT-based messaging solution, that allows applica-
tion running on the gateway to transparently communicate
with a Cloud Platform, without having to deal with the avail-
ability of the network interfaces, or how to represent IoT
data. Support for additional messaging protocols is available
through the built-in Apache Camel message routing engine.

12 Copyright 2016 The Eclipse Foundation. All Rights Reserved

Open Source Technology for IoT

Remote management Eclipse Kura provides a remote

management solution based on the MQTT protocol, that
allows to monitor the overall health of an IoT gateway, in
addition to control (install, update, modify settings) the
software its running.

Eclipse SmartHome provides an IoT gateway platform that is

specifically focused on the home automation domain. An Eclipse
SmartHome stack would including the following:
Operating System Linux (Ubuntu/Ubuntu Core, Yocto-
based linux distribution), Windows or macOS.
Application Container or Runtime Environment Eclipse
Equinox or Eclipse Concierge (OSGi Runtimes).
Communication and Connectivity Eclipse SmartHome
brings support for many off-the-shelf home automation
devices such as Belkin WeMo, LIFX, Philips Hue, Sonos, etc.
Eclipse SmartHome focuses on enabling home automation
solutions to communicate within an Intranet of Things ;
therefore offline capabilities are a paramount design goal.
Data Management & Messaging Eclipse SmartHome has
an internal event bus, which can be exposed to external
systems through e.g. SSE or MQTT. It furthermore provides
mechanisms for persisting values in databases and for run-
ning local business logic through a rule engine.
Remote Management Eclipse SmartHome supports device
onboarding and configuration through its APIs. It furthermore
provides an infrastructure to perform firmware update of
connected devices.

Eclipse 4DIAC provides an industrial-grade open source infrastruc-

ture for distributed industrial process measurement and control
systems based on the IEC 61499 standard. 4DIAC is ideally suited
for Industrie 4.0 and Industrial IoT applications in a manufactur-
ing setting.

The IEC 61499 standard defines a domain specific modeling lan-

guage for developing distributed industrial control solutions by
providing a vendor independent format and for simplifying support
for controller to controller communication.

13 Copyright 2016 The Eclipse Foundation. All Rights Reserved

Open Source Technology for IoT

Open Source Stack for IoT Cloud

Platforms
The Eclipse IoT Community has a number of projects that are focused
on providing the functionality required for IoT cloud platforms.

Eclipse Kapua is a modular platform providing the services required

to manage IoT gateways and smart edge devices. Kapua provides
a core integration framework and an initial set of core IoT services
including a device registry, device management services, messaging
services, data management, and application enablement.

The goal of Eclipse Kapua is to create a growing ecosystem of

micro services through the extensions provided by other Eclipse
IoT projects and organizations.

Eclipse OM2M is an IoT Platform specific for the telecommunica-

tion industry, based on the oneM2M specification.

It provides a horizontal Common Service Entity (CSE) that can be

deployed in an M2M server, a gateway, or a device. Each CSE pro-
vides Application Enablement, Security, Triggering, Notification,
Persistency, Device Interworking, Device Management.

The Eclipse IoT community also has a number of standalone projects

that provide functionality to address key features required for an
IoT cloud platform. These projects can be used independently of
Eclipse Kapua and over time some may be integrated into Kapua.

Connectivity and Protocol Support

Eclipse Hono provides a uniform API for interacting with

devices using arbitrary protocols, as well as an extensible
framework to add other protocols.
Eclipse Mosquitto provides an implementation of an MQTT
broker.

Device Management & Device Registry

Eclipse Leshan provides an implementation of the OMA

LWM2M device management protocol.
Eclipse hawkBit provides the management tools to roll out
software updates to devices and gateways.

14 Copyright 2016 The Eclipse Foundation. All Rights Reserved

Open Source Technology for IoT

Event Management & Application Enablement

Eclipse Hono helps to expose consistent APIs for consum-

ing telemetry data or sending commands to devices, so as
to rationalize IoT application development.

Analytics and Visualization

Outside of the Eclipse IoT community there are many open

source options for data analytics and visualization, including
Apache Hadoop, Apache Spark, and Apache Storm. Within
the Eclipse community, Eclipse BIRT provides support for
dashboards and reporting of data stored in a variety of data
repositories.

Open Source for Cross-Stack

Functionality
Security

Eclipse tinydtls provides an implementation of the DTLS

security protocol providing transport layer security between
the device and server.
Eclipse ACS provides an access control service that allows
each stack in an IoT solution to protect their resources using
a RESTful interface.

Ontologies

Eclipse Unide is a protocol for Production Performance Man-

agement (PPM) in the manufacturing industry. It establishes
an ontology for sharing machine performance information.
Eclipse Whiskers implements the OGC SensorThings API
that provides a standard way to share location based infor-
mation for devices.

Development Tools and SDKs

Eclipse Vorto provides a set of tools and repository for

creating device information models.
Eclipse JDT and Eclipse CDT allow for integrated develop-
ment of IoT solutions. For example, Eclipse Kura applications
can be tested and debugged from within the Eclipse Java
IDE (JDT).
Eclipse Che provides a browser-based IDE that can be used
for building IoT solutions.Open Source Stack for IoT Cloud
Platforms.

15 Copyright 2016 The Eclipse Foundation. All Rights Reserved

Conclusion

An IoT Solution requires substantial amount of technology in the

form of software, hardware, and networking.

In this white paper we have defined the software requirements

across three different stacks. For the IoT industry to be successful,
it needs to enable more than a succession of independent silos
designed by one vendor that address just one business case at the
same time. As examples, a connected car comprises MCUs from
many different vendors, and a smart city or a smart factory will
have a wide variety of sensors and gateways, and an even wider
variety of companies looking at building end applications, etc.

The last twenty years have proven that open source software and
open source communities are key providers of technology for the
software industry. The Internet of Things is following a similar
trend, and it is expected that more and more IoT solutions will be
built on open source software.

For the past five years, the Eclipse IoT community has been very
active in building a portfolio of open source projects that companies
and individuals use today to build their IoT solutions.

If you are interested in participating, please

join us and visit https://iot.eclipse.org.

16 Copyright 2016 The Eclipse Foundation. All Rights Reserved

https://iot.eclipse.org