Scribd
Upload
2K views3 pages

GBS 8200

The GBS 8200 converter converts signals from CGA, EGA, YPbPr sources to VGA for display on CRT, LCD, and PDP monitors. It auto scans CGA, EGA, and YPbPr input signals and outputs VGA signals at resolutions up to 1360x768. The converter provides image zooming and positioning controls and RBG gain adjustment through an OSD menu. It measures 115x105x20mm and runs on 5V DC power.

Uploaded by

pitacas
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
2K views3 pages

GBS 8200

The GBS 8200 converter converts signals from CGA, EGA, YPbPr sources to VGA for display on CRT, LCD, and PDP monitors. It auto scans CGA, EGA, and YPbPr input signals and outputs VGA signals at resolutions up to 1360x768. The converter provides image zooming and positioning controls and RBG gain adjustment through an OSD menu. It measures 115x105x20mm and runs on 5V DC power.

Uploaded by

pitacas
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

CGA EGA YPbPr to VGA

MODEL GBS 8200


CGA EGA YPbPr to VGA Converter

Note:
The high definition converter GBS-8200 its professional of game
convert.Support all games(AmusementPlay stationXboxwii)convert
to CRT monitor LCD monitor PDP monitor Auto scan CGA EGA YUV signal,
VGA outputs , output high resolution signal.

Features:
Supports CGA EGA YUV signal input.
Supports VGA output 640*480,800*600,1024*768,1360*768
CGA/EGA signal auto scan(15K,24K,31K)
YUV(YPbPr) signal auto scan(480i,576i,720i,1080i,480p,576p,720p,1080p)
Chinese and English OSD.
Supports position control & zoom control.
True digital 24-bit A/D converter for true 16.7-million color conversion.
Supports all VGA monitor (CRTLCDPDPPROJECT)

86-755-82057080 [email protected] www.gbs100.com


Specifications:

Power DC5V 2A +/- 0.5v P7 or P9


Input signal CGA/EGA 14.5-16.5K23.5-25.5K30.5-32.5K Auto P3 or
scan P11 or
P10
RGBHV 30.5-32.5K Auto P10 or
scan P11
VGA 30.5-32.5K Auto P10 or
scan P11
Ypbpr 480p,576p,720p,1080p Auto P2
scan
Ycbcr 480i,576i,720i,1080i Auto P2
scan
Output signal VGA 640*480,800*6001024*768,1360*768 P4 and
P12
User control Input Switch, Image Zoom, Image Menu
Position,Output Resolution ,R\G\B gain KeyR\G\B
adjust. VR
Dimensions 115*105*20mm

Menu Control
MENU open OSD menu, and enter.
UP up and increase.
DOWN/AUTO down and reduce.
Press this key auto scan CGA/EGA signal.
Press this key over 5 second and release reset system.
This operation is invalid when you open OSD menu.
SW switch input signal Ypbpr/RGBS/RGBHV.
This operation is invalid when you open OSD menu.
Clamp sp&Clamp please dont adjust this button , excepting the
monitor have black item, or picture discoloration.
More functions control please look to OSD to operation.

Power Supplies:
Multi-Voltage Power Supply : 100-240VAC to 5V DC 2.0A Switch Mode Power
Supply (Center Positive)
Power cable 2 Pin Connector

Faq:
No signal on you monitor
please check input and output cable, make sure all cable its connected.
And make sure power its on. Display on you monitor its No signal
please press SW to switch input signal.

86-755-82057080 [email protected] www.gbs100.com


Input not supports
when you monitor display input not supports maybe you need change to
low resolution .
please press DOWN/AUTO over 5 second and release. system reset to
800*600 output.
Image not full on you screen
please enter menu adjust image position and zoom.
Image shake or freeze
please press DOWN/AUTO, system auto scan input signal and restore
image.
Have black item on screen, or all screen its too black, or picture
discoloration.
please adjust Clamp sp and Clamp st, please keep Clamp st less
than Clamp sp.
Advice Clamp st SET 03 , Clamp sp SET 04.
Image color not right
please adjust R\G\B VR.

86-755-82057080 [email protected] www.gbs100.com

You might also like