Data Sheet 151uk Hardox 400 Plate 2017-04-19 313 371857150 en PDF
Data Sheet 151uk Hardox 400 Plate 2017-04-19 313 371857150 en PDF
Data Sheet 151uk Hardox 400 Plate 2017-04-19 313 371857150 en PDF
Dimension Range
Hardox 400 is available in thicknesses of4.0 130 mm. Hardox 400 is available in widths up to 3350 mm and lengths up to 14630 mm.More
detailed information on dimensions is provided in the dimension program.
Mechanical Properties
Thickness Hardness 1) Typical yield strength (MPa),
(mm) (HBW) not guaranteed
4.0- 130.0 370- 430 900- 1100
1)
Brinell hardness, HBW, according to EN ISO 6506-1, on a milled surface 0.5 3 mm below surface. At least one test specimen per heat and 40 tons.
The nominal material thickness will not deviate more than 15 mm from that of the test specimen.
Hardox is through-hardened. Minimum core hardness is 90 % of the guaranteed minimum surface hardness.
Impact Properties
Grade Longitudinal test, typical impact energy,
Charpy V 10 x10 mm test specimen.
Hardox 400 Plate 1) 45 J /-40 oC
Impact toughness measured upon agreement. For thicknesses between 6- 11.9 mm, sub-size Charpy V-specimens are used. Impact testing according to ISO EN
1)
C *) Si *) Mn *) P S Cr *) Ni *) Mo *) B *)
(max %) (max %) (max %) (max %) (max %) (max %) (max %) (max %) (max %)
0.32 0.70 1.60 0.025 0.010 2.50 1.50 0.60 0.004
The steel is grain refined. *) Intentional alloying elements.
Tolerances
More details are given in SSABs brochure 41-General Product Information Strenx, Hardox, Armox and Toolox-UK andHardox Guarantees or at
www.ssab.com.
Thickness
Tolerances according to Hardox Thickness Guarantees. Hardox Guarantees meet the requirements of EN 10 029 Class A.
Shape
Tolerances according to EN 10 029.
Flatness
Tolerances according to Hardox Flatness Guarantees Class D, which are more restrictive than EN 10 029.
Surface Properties
According to EN 10 163-2, Class A Subclass 1.
Bending
For Hardox plate the tolerances are according toHardox Bending Guarantees Class D.
Delivery Conditions
The delivery condition is Q or QT (Quenched or Quenched and Tempered). The plates are delivered with sheared or thermallycut edges. Thick-
nesses over 80 mm are deliveredwith mill edge as standard.Delivery requirements can be found in SSABs brochure 41-General product
information Strenx, Hardox, Armox and Toolox-UKor at www.ssab.com.
Hardox 400 is not intended for further heat treatment. It has obtained its mechanical properties by quenching and when necessary by means
of subsequent tempering. The properties of the delivery condition cannot be retained after exposure to temperatures in excess of 250C .
Appropriate health and safety precautions must be taken when welding, cutting, grinding or otherwise working on this product. Grinding, espe-
cially of primer coated plates, may produce dust with a high particle concentration.
Contact Information
www.ssab.com/contact
The English version of this document shall prevail in case of discrepancy. Download the latest version of this document at www.ssab.com
SSAB, Strenx, Hardox, Docol, GreenCoat, Toolox, Armox, Ramor, Domex, Laser, Raex, Duroxite are trademarks owned by the SSAB group of companies.