Sampling Distributions
Sampling Distributions
Sampling Distributions
1. Taxi Fares are normally distributed with mean fare $22.27 and a standard deviation of
$2.20.
A) Which should have the greater probability of falling between $21 & $24 the mean of
a random sample of 10 taxi fares or the amount of a single random taxi fare? Why?
B) Which should have a greater probability of being over $24 the mean of 10 randomly
selected taxi fares or the amount of a single randomly selected taxi fare? Why?
C) What is the probability that the sample has a mean weight of less than 5 ounces?
D) How would the sampling distribution of x change if the sample size, n , were
increased from 50 to 100?
3. A soft-drink bottle vendor claims that its process yields bottles with a mean internal
strength of 157 psi (pounds per square inch) and a standard deviation of 3 psi and is
normally distributed. As part of its vendor surveillance, a bottler strikes an agreement
with the vendor that permits the bottler to sample from the vendors production to verify
the vendors claim.
A) Suppose the bottler randomly selects a single bottle to sample. What is the mean and
standard deviation?
B) What is the probability that the psi of the single bottle is 1.3 psi or more below the
process mean?
C) Suppose the bottler randomly selected 40 bottles from the last 10,000 produced. What
is the mean and standard deviation of the sampling distribution?
D) What is the probability that the sample mean of the 40 bottles is 1.3 psi or more below
the process mean?
E) From part c, in order to reduce the standard deviation 50% (half) , how large would the
sample size need to be.
4. A study of 10,000 males who smoke at least two packs of cigarettes daily shows that
the mean life span is 65.3 years while the standard deviation is 3.4 years. If a sample of
40 is selected, find the probability that the mean life span of the sample is less than the
retirement age of 65 years.
6. A battery is designed to last for 25 hours of operation during normal use. The batteries
are produced in batches of 2000 and 50 batteries from each batch are tested. If the mean
life of the sample is less than 24 hours, the entire batch is rejected. Assuming that = 25
and = 3 hours for any randomly selected battery, find the probability that a batch will be
rejected.
7. A sampling distribution for means has a mean of 18 and a standard deviation of 3.2
when the sample size is n = 50. If I need to reduce the standard deviation to of that,
how large a sample would I need?
8. A manufacturing process is designed to produce bolts with a 0.5 inch diameter.. Once a
day, a random sample of 36 bolts is selected and the diameter recorded. If the resulting
sample mean is less than 0.49 inches or greater than 0.51 inches, the process is shut down
for adjustment. The standard deviation for the diameter of a single bolt is 0.02 inches. If
these bolt diameters are normally distributed, what is the probability that the sample
mean falls outside the 0.49 to 0.51 inch interval?
9. Just before a referendum on a school budget, a local newspaper polls 400 voters in an
attempt to predict whether the budget will pass. Suppose that the budget actually has the
support of 52% of the voters (like magic we know this). Whats the probability that the
newspapers sample will lead them to predict defeat?
10. When a truckload of apples arrives at a packing plant, a random sample of 150 is
selected and examined for bruises, discolorations, and other defects. The whole truckload
will be rejected if more than 5% of the sample is unsatisfactory. Suppose that in fact 8%
of the apples on the truck do not meet the desired standard. Whats the probability that the
shipment will be accepted anyway?