Computer Basics

What is A Computer
A computer is an electronic machine that accepts information, stores it until the information is
needed, processes the information according to the instructions provided by the user, and finally returns the
results to the user. The computer can store and manipulate large quantities of data at very high speed, but a
computer cannot think. A computer makes decisions based on simple comparisons such as one number
being larger than another. Although the computer can help solve a tremendous variety of problems, it is
simply a machine. It cannot solve problems on its own.

History of Computers
Since civilizations began, many of the advances made by science and technology have depended
upon the ability to process large amounts of data and perform complex mathematical calculations. For
thousands of years, mathematicians, scientists and businessmen have searched for computing machines that
could perform calculations and analyze data quickly and efficiently. One such device was the abacus.
The abacus was an important counting machine in ancient Babylon, China, and throughout Europe
where it was used until the late middle ages. It was followed by a series of improvements in mechanical
counting machines that led up to the development of accurate mechanical adding machines in the 1930s.
These machines used a complicated assortment of gears and levers to perform the calculations but they
were far to slow to be of much use to scientists. Also, a machine capable of making simple decisions such
as which number is larger was needed. A machine capable of making decisions is called a computer.
The first computer like machine was the Mark I developed by a team from IBM and Harvard
University. It used mechanical telephone relays to store information and it processed data entered on
punch cards. This machine was not a true computer since it could not make decisions.
In June 1943, work began on the world's first electronic computer. It was built at the University of
Pennsylvania as a secret military project during World War II and was to be used to calculate the trajectory
of artillery shells. It covered 1500 square feet and weighed 30 tons. The project was not completed until
1946 but the effort was not wasted. In one of its first demonstrations, the computer solved a problem in 20
seconds that took a team of mathematicians three days. This machine was a vast improvement over the
mechanical calculating machines of the past because it used vacuum tubes instead of relay switches. It
contained over 17,000 of these tubes, which were the same type tubes used in radios at that time.
The invention of the transistor made smaller and less expensive computers possible. Although
computers shrank in size, they were still huge by todays standards. Another innovation to computers in the
60s was storing data on tape instead of punch cards. This gave computers the ability to store and retrieve
data quickly and reliably.

Classification of Computers
Mainframe Computers
Minicomputers
Microcomputers
Supercomputers

Mainframe computers are very large, often filling an entire room. They can store enormous of information, can
perform many tasks at the same time, can communicate with many users at the same time, and are very expensive. .
The price of a mainframe computer frequently runs into the millions of dollars. Mainframe computers usually have
many terminals connected to them. These terminals look like small computers but they are only devices used to
send and receive information from the actual computer using wires. Terminals can be located in the same room
with the mainframe computer, but they can also be in different rooms, buildings, or cities. Large businesses,
government agencies, and universities usually use this type of computer.

Minicomputers are much smaller than mainframe computers and they are also much less expensive. The cost of
these computers can vary from a few thousand dollars to several hundred thousand dollars. They possess most of
the features found on mainframe computers, but on a more limited scale. They can still have many terminals, but
not as many as the mainframes. They can store a tremendous amount of information, but again usually not as much
as the mainframe. Medium and small businesses typically use these computers.

Microcomputers are the types of computers we are using in your classes at Floyd College. These computers are
usually divided into desktop models and laptop models. They are terribly limited in what they can do when
compared to the larger models discussed above because they can only be used by one person at a time, they are
much slower than the larger computers, and they can not store nearly as much information, but they are excellent
when used in small businesses, homes, and school classrooms. These computers are inexpensive and easy to use.
They have become an indispensable part of modern life.

Computer Tasks
Input
Storage
Processing
Output

When a computer is asked to do a job, it handles the task in a very special way.
1. It accepts the information from the user. This is called input.
2. It stored the information until it is ready for use. The computer has memory chips, which are designed to hold
information until it is needed.
3. It processes the information. The computer has an electronic brain called the Central Processing Unit, which is
responsible for processing all data and instructions given to the computer.
4. It then returns the processed information to the user. This is called output.

Every computer has special parts to do each of the jobs listed above. Whether it is a multimillion dollar mainframe
or a thousand dollar personal computer, it has the following four components, Input, Memory, Central Processing,
and Output.

The central processing unit (CPU) is the electronic brain of the computer. The CPU in a personal computer is
usually a single chip. It organizes and carries out instructions that come from either the user or from the software.
The processor is made up of many components, but two of them are worth mentioning at this point. These are the
arithmetic and logic unit and the control unit. The control unit controls the electronic flow of information around
the computer. The arithmetic and logic unit, ALU, is responsible for mathematical calculations and logical
comparisons.

The processor is plugged into the computers motherboard. The motherboard is a rigid rectangular card containing
the circuitry that connects the processor and all the other components that make up your personal computer. In most
personal computers, some of the components are attached directly to the motherboard and some are housed on their
own small circuit boards that plug into the expansion slots built into the motherboard.

Input Devices
A computer would be useless without some way for you to interact with it because the machine must be able to
receive your instructions and deliver the results of these instructions to you. Input devices accept instructions and
data from you the user. Some popular input devices are listed below.

Keyboard
Mouse
Scanner
Microphone
CD-ROM
Joystick
Memory
A personal computer must have a means of storing information (data) and instructions so that it can perform
processing tasks on the data. Personal computers have two types of memory. These are discussed below.

Read Only Memory (ROM)

ROM is a small area of permanent memory that provides startup instructions when the computer is
turned on. You can not store any data in ROM. The instructions in ROM are set by the
manufacturer and cannot be changed by the user. The last instruction in ROM directs the
computer to load the operating system.

Every computer needs an operating system. This is a special computer program that must be
loaded into memory as soon as the computer is turned on. Its purpose is to translate your
instructions in English into Binary so that the computer can understand your instructions. The
operating system also translates the results generated by your computer into English when it is
finished so that we can understand and use the results. The operating system comes with a
computer.

Random Access Memory (RAM)

This is the area of memory where data and program instructions are stored while the computer is
in operation. This is temporary memory. NOTE: The data stored in RAM is lost forever when
the power is turned off. For this reason it is very important that you save your work before
turning off your computer. This is why we have peripheral storage devices like your computers
hard disk and floppy diskettes.

Permanent Memory (Auxiliary Storage)

Your files are stored in permanent memory only when saved to your disk in a: drive or saved to
your computer's hard disk,
Drive c: In the Floyd College labs, you can also save your work to a network drive. We will
discuss this in class.

To better understand how a computer handles information and to also understand why information is lost if the
power goes off, lets take a closer look at how a computer handles information. Your computer is made of millions
of tiny electric circuits. For every circuit in a computer chip, there are two possibilities:

1. an electric circuit flows through the circuit or

2. An electric circuit does not flow through the circuit.

When an electric current flows through a circuit, the circuit is on. When no electricity flows, the circuit is off. An
on circuit is represented by the number one (1) and an off circuit is represented by the number zero (0). The two
numbers 1 and 0 are called bits. The word bit comes from binary digit. Each time a computer reads an
instruction, it translates that instruction into a series of bits, 1s and 0s. On most computers every character from
the keyboard is translated into eight bits, a combination of eight 1s and 0s. Each group of eight bits is called a
byte.

Byte The amount of space in memory or on a disk needed to store one character. 8 bits = 1 Byte

Since computers can handle such large numbers of characters at one time, metric prefixes are combined with the
word byte to give some common multiples you will encounter in computer literature.

Kilo means 1000 Kilobyte (KB) = 1000 Bytes

Mega means 1,000,000 Megabyte (MB) = 1,000,000 Bytes
Giga Means 1,000,000,000 Gigabyte (GB) = 1,000,000,000 Bytes
At this point it would be good to point out why information stored in RAM is lost if the power goes off. Consider
the way the following characters are translated into binary code for use by the computer.

A 01000001
B 01000010
C 01000011
X 01011000
Z 01011010
1 00110001
2 00110010

Consider the column at the right, which represents how the computer stores information. Each of the 1s in the
second column represents a circuit that is on. If the power goes off, these circuits can NOT be on any more
because the electricity has been turned off and any data represented by these circuits is lost. This is why we can not
overemphasize the importance of saving your work often.

Central Processing Unit (CPU)

The central processing unit is one of the two most important components of your microcomputer. It is the electronic
brain of your computer. In addition to processing data, it controls the function of all the other components. The
most popular microprocessors in IBM compatible computers are made by Intel. The generations of microprocessors
are listed below.

1981 8088
1984 80286
1987 80386
1990 80486
1993 Pentium
1996 P-6
1998 Pentium III
2000 Pentium IV

Your computer has a Pentium IV processor.

Output Devices

Monitor
Speakers
Printer
Impact
Dot Matrix
Non-Impact
Ink Jet
Laser

Storage Devices
Hard disk
Floppy disk
Tape drive
CD-ROM
Telecommunications

Telecommunications means that you are communicating over long distances usually using phone lines. This enables
you to send data to and receive data from another computer that can be located down the street, in another town, or
in another country. Telecommunications requires a communication device called a modem, which connects your
computer to a standard phone jack. A modem converts the digital signals that your computer uses into analog
signals that can be transmitted over the phone lines. To use a modem, you must also have communication software
to handle the transmission process.

Computer Software
System Software
System software will come provided with each computer and is necessary for the computers operation. This
software acts as an interpreter between the computer and user. It interprets your instructions into binary code and
likewise interprets binary code into language the user can understand. In the past you may have used MS-DOS or
Microsoft Disk Operating System which was a command line interface. This form of system software required
specific commands to be typed. Windows 95 is a more recent version of system software and is known as a
graphical interface. This means that it uses graphics or "icons" to represent various operations. You no longer have
to memorize commands; you simply point to an icon and click.

Program Software
Program software is software used to write computer programs in specific computer languages.

Application Software
Application software is any software used for specified applications such as:
Word Processing
Spreadsheet
Database
Presentation Graphics
Communication
Tutorials
Entertainment, Games