Scribd
Upload
94 views3 pages

Engineering Consultants Group: Project Name Job Ref. Calc. by Date Date

This document provides calculations for the design of a composite beam for a checking and packing hall project. It includes: 1) Material properties and beam dimensions, such as concrete strength of 300 kg/cm2, steel grades of St.52, and beam span of 21.5 m. 2) Section properties for the steel section alone and the composite section, including areas, moments of inertia, and section moduli. 3) Design loads including bending moments of 30 m.t and 65 m.t for stages 1 and 2. 4) Stress checks for the steel and composite sections under the calculated loads and allowable stresses, showing all checks are safe. 5) Check of shear

Uploaded by

Harjasa Adhi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
94 views3 pages

Engineering Consultants Group: Project Name Job Ref. Calc. by Date Date

This document provides calculations for the design of a composite beam for a checking and packing hall project. It includes: 1) Material properties and beam dimensions, such as concrete strength of 300 kg/cm2, steel grades of St.52, and beam span of 21.5 m. 2) Section properties for the steel section alone and the composite section, including areas, moments of inertia, and section moduli. 3) Design loads including bending moments of 30 m.t and 65 m.t for stages 1 and 2. 4) Stress checks for the steel and composite sections under the calculated loads and allowable stresses, showing all checks are safe. 5) Check of shear

Uploaded by

Harjasa Adhi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 3

ECG Project Name

Job Ref.
Engineering Consultants Group CHECKING AND PACKING HALL

Bldg. 2, Block 10, El Sefarat District Calc. By Date Checked By Date Rev.

P.O.Box No. 1167, Cairo 11511, Egypt. M.Nour Sheet No.


COMPOSITE BEAM :- Refrences
ECP

1)- MATRIAL PROPERTIES :-


Steel.
Steel grade St.52
Fy = 3.60 t/cm2
Fu = 5.20 t/cm2
Concrete.
Fcu = 300 kg/cm2
Fc = 85.00 kg/cm2
Ec = 242487.11 kg/cm2
n = 8.660
2)- DIMENSIONS AND SECTIONS :-
Beam data.
Span = 21.50 m
Spacing = 1.80 m
bFL.U
Lu.act (Stage 1) = 21.50 m
tFL.U
Steel.
bFLU = 350 mm Y1
tFLU S hWEB S
= 25 mm
hweb = 800 mm
tweb = 12 mm Y2
bFLL = 350 mm
tFLL = 25 mm tFL.L
Concrete.
bFL.L
ts = 120 mm
Be = 720 mm
Y = 55.00 mm this work sheet for unshored system only.
tc = 65.00 mm overall depth = span/(16-->22).
3)- SECTION PROPERTIES :-
Steel section (Stage 1)
Y1 = 42.50 cm
Y2 = 42.50 cm
As = 271.00 cm2
Is = 349064.58 cm4
Ss.upper = 8213.28 cm3
Ss.lower = 8213.28 cm3
Composite section (Stage 2)
Y3 = 29.45 cm
Y4 = 55.55 cm
Y5 = 41.45 cm
Av = 370.77 cm2
Iv = 521790.09 cm4
Ss.upper = 17718.09 cm3
Ss.lower = 9393.09 cm3
Sc.upper = 12588.55 cm3
ECG Project Name
Job Ref.
Engineering Consultants Group CHECKING AND PACKING HALL

Bldg. 2, Block 10, El Sefarat District Calc. By Date Checked By Date Rev.

P.O.Box No. 1167, Cairo 11511, Egypt. M.Nour Sheet No.


4)- STRAINING ACTIONS :-
- Stage (1)
M1 = 30.00 m.t The bending moment and shear force for stage 1
Q1 = 5.00 t is due to ow of concerete and ow of steel.
- Stage (2)
M2 = 65.00 m.t The bending moment and shear force for stage 2
Q2 = 15.00 t is due to super dead load and live load.
5)- CHECK STRESS :-
- Allowable stress for stage (1)
dw/tw = 66.667 Web is Compact table(2.1a)
C/tf = 6.760 Flange is Compact table(2.1c)
Sec is Compact
Cb = 1.13 table(2.2)
( 20.bf ) / ( fy ) = 3.69 m ECP 16
Lumax = 3.69 m
( 1380.Af ) / ( fy.d ) x Cb
= 4.74 m eqn. 2.18
There is Lateral Torsional Buckling in the comp.flange
Fbcx = 0.525 t/cm2
- Check steel section: stage (1)
fs.upper = 0.37 t/cm2 < 0.525 t/cm2 Safe
fs.lower = 0.37 t/cm2 < 2.088 t/cm2 Safe

- Check composite section: stage (2)


fs.upper = 0.73 t/cm2 < 2.088 t/cm2 Safe
fs.lower = 1.057 t/cm2 < 2.088 t/cm2 Safe
fc.upper = 59.622 kg/cm2 < 85.00 kg/cm2 Safe

- Check shear stress:

qw = 0.208 t/cm2 < 1.260 t/cm2 Safe

6)- CHECK OF STUD CONNECTOR :-


ds = 32.00 mm the value of ds shall not exceed twice the
wild size (S) = 16.00 mm thickness of the top flange of the steel beam.
h = 120.00 mm max ds = 50.00 mm
no of rows = 2 min h = 128.00 mm
ds' = 48.00 mm
Asc = 8.04 cm2
Aw = 8.04 cm2
Rsc = 11.71 t
Rw = 8.36 t
pitch = 19.20 cm
ECG Project Name
Job Ref.
Engineering Consultants Group CHECKING AND PACKING HALL

Bldg. 2, Block 10, El Sefarat District Calc. By Date Checked By Date Rev.

P.O.Box No. 1167, Cairo 11511, Egypt. M.Nour Sheet No.

You might also like