Definitions: Software Is More Than Just A Program Code. A Program Is An Executable

Software is more than just a program code.
A program is an executable
code, which serves some computational purpose. Software is considered to
be collection of executable programming code, associated libraries and
documentations. Software, when made for a specific requirement is
called software product.
Engineering on the other hand, is all about developing products, using

well-defined, scientific principles and methods.
Software engineering is an engineering branch associated with

development of software product using well-defined scientific principles,
methods and procedures. The outcome of software engineering is an
efficient and reliable software product.
Definitions
IEEE defines software engineering as:
(1) The application of a systematic,disciplined,quantifiable approach to the

development,operation and maintenance of software; that is, the application
of engineering to software.
(2) The study of approaches as in the above statement.
Fritz Bauer, a German computer scientist, defines software engineering as:
Software engineering is the establishment and use of sound engineering

principles in order to obtain economically software that is reliable and work
efficiently on real machines.
Software Evolution
The process of developing a software product using software engineering
principles and methods is referred to as software evolution. This includes
the initial development of software and its maintenance and updates, till
desired software product is developed, which satisfies the expected
requirements.
Evolution starts from the requirement gathering process. After which

developers create a prototype of the intended software and show it to the
users to get their feedback at the early stage of software product
development. The users suggest changes, on which several consecutive
updates and maintenance keep on changing too. This process changes to
the original software, till the desired software is accomplished.
Even after the user has desired software in hand, the advancing technology
and the changing requirements force the software product to change
accordingly. Re-creating software from scratch and to go one-on-one with
requirement is not feasible. The only feasible and economical solution is to
update the existing software so that it matches the latest requirements.
Software Evolution Laws
Lehman has given laws for software evolution. He divided the software into
three different categories:
S-type (static-type) - This is a software, which works strictly according to

defined specifications and solutions. The solution and the method to achieve it,
both are immediately understood before coding. The s-type software is least
subjected to changes hence this is the simplest of all. For example, calculator
program for mathematical computation.
P-type (practical-type) - This is a software with a collection of procedures.

This is defined by exactly what procedures can do. In this software, the
specifications can be described but the solution is not obvious instantly. For
example, gaming software.
E-type (embedded-type) - This software works closely as the requirement of

real-world environment. This software has a high degree of evolution as there
are various changes in laws, taxes etc. in the real world situations. For example,
Online trading software.
E-Type software evolution

Lehman has given eight laws for E-Type software evolution -
Continuing change - An E-type software system must continue to adapt to the

real world changes, else it becomes progressively less useful.
Increasing complexity - As an E-type software system evolves, its complexity

tends to increase unless work is done to maintain or reduce it.
Conservation of familiarity - The familiarity with the software or the

knowledge about how it was developed, why was it developed in that particular
manner etc. must be retained at any cost, to implement the changes in the
system.
Continuing growth- In order for an E-type system intended to resolve some

business problem, its size of implementing the changes grows according to the
lifestyle changes of the business.
Reducing quality - An E-type software system declines in quality unless

rigorously maintained and adapted to a changing operational environment.
Feedback systems- The E-type software systems constitute multi-loop, multi-
level feedback systems and must be treated as such to be successfully modified
or improved.
Self-regulation - E-type system evolution processes are self-regulating with the

distribution of product and process measures close to normal.
Organizational stability - The average effective global activity rate in an

evolving E-type system is invariant over the lifetime of the product.
Software Paradigms
Software paradigms refer to the methods and steps, which are taken while
designing the software. There are many methods proposed and are in work
today, but we need to see where in the software engineering these
paradigms stand. These can be combined into various categories, though
each of them is contained in one another:
Programming paradigm is a subset of Software design paradigm which is

further a subset of Software development paradigm.
Software Development Paradigm

This Paradigm is known as software engineering paradigms where all the
engineering concepts pertaining to the development of software are applied.
It includes various researches and requirement gathering which helps the
software product to build. It consists of
Requirement gathering
Software design
Programming
Software Design Paradigm

This paradigm is a part of Software Development and includes
Design
Maintenance
Programming
Programming Paradigm
This paradigm is related closely to programming aspect of software
development. This includes
Coding
Testing
Integration
Need of Software Engineering

The need of software engineering arises because of higher rate of change in
user requirements and environment on which the software is working.
Large software - It is easier to build a wall than to a house or building,

likewise, as the size of software become large engineering has to step to give it a
scientific process.
Scalability- If the software process were not based on scientific and engineering
concepts, it would be easier to re-create new software than to scale an existing
one.
Cost- As hardware industry has shown its skills and huge manufacturing has
lower down he price of computer and electronic hardware. But the cost of
software remains high if proper process is not adapted.
Dynamic Nature- The always growing and adapting nature of software hugely
depends upon the environment in which user works. If the nature of software is
always changing, new enhancements need to be done in the existing one. This is
where software engineering plays a good role.
Quality Management- Better process of software development provides better

and quality software product.
Characteristics of good software

A software product can be judged by what it offers and how well it can be
used. This software must satisfy on the following grounds:
Operational
Transitional
Maintenance
Well-engineered and crafted software is expected to have the following

characteristics:
Operational
This tells us how well software works in operations. It can be measured on:
Budget
Usability
Efficiency
Correctness
Functionality
Dependability
Security
Safety
Transitional
This aspect is important when the software is moved from one platform to
another:
Portability
Interoperability
Reusability
Adaptability
Maintenance
This aspect briefs about how well a software has the capabilities to maintain
itself in the ever-changing environment:
Modularity
Maintainability
Flexibility
Scalability
In short, Software engineering is a branch of computer science, which uses

well-defined engineering concepts required to produce efficient, durable,
scalable, in-budget and on-time software products.
Software Development Life Cycle, SDLC for short, is a well-defined, structured sequence of
stages in software engineering to develop the intended software product.
SDLC Activities
SDLC provides a series of steps to be followed to design and develop a software product
efficiently. SDLC framework includes the following steps:
Communication
This is the first step where the user initiates the request for a desired software product. He
contacts the service provider and tries to negotiate the terms. He submits his request to the
service providing organization in writing.
Requirement Gathering
This step onwards the software development team works to carry on the project. The team holds
discussions with various stakeholders from problem domain and tries to bring out as much
information as possible on their requirements. The requirements are contemplated and
segregated into user requirements, system requirements and functional requirements. The
requirements are collected using a number of practices as given -
studying the existing or obsolete system and software,

conducting interviews of users and developers,
referring to the database or
collecting answers from the questionnaires.
Feasibility Study
After requirement gathering, the team comes up with a rough plan of software process. At this
step the team analyzes if a software can be made to fulfill all requirements of the user and if
there is any possibility of software being no more useful. It is found out, if the project is
financially, practically and technologically feasible for the organization to take up. There are
many algorithms available, which help the developers to conclude the feasibility of a software
project.
System Analysis
At this step the developers decide a roadmap of their plan and try to bring up the best software
model suitable for the project. System analysis includes Understanding of software product
limitations, learning system related problems or changes to be done in existing systems
beforehand, identifying and addressing the impact of project on organization and personnel etc.
The project team analyzes the scope of the project and plans the schedule and resources
accordingly.
Software Design
Next step is to bring down whole knowledge of requirements and analysis on the desk and
design the software product. The inputs from users and information gathered in requirement
gathering phase are the inputs of this step. The output of this step comes in the form of two
designs; logical design and physical design. Engineers produce meta-data and data dictionaries,
logical diagrams, data-flow diagrams and in some cases pseudo codes.
Coding
This step is also known as programming phase. The implementation of software design starts in
terms of writing program code in the suitable programming language and developing error-free
executable programs efficiently.
Testing
An estimate says that 50% of whole software development process should be tested. Errors may
ruin the software from critical level to its own removal. Software testing is done while coding
by the developers and thorough testing is conducted by testing experts at various levels of code
such as module testing, program testing, product testing, in-house testing and testing the
product at users end. Early discovery of errors and their remedy is the key to reliable software.
Integration
Software may need to be integrated with the libraries, databases and other program(s). This
stage of SDLC is involved in the integration of software with outer world entities.
Implementation
This means installing the software on user machines. At times, software needs post-installation
configurations at user end. Software is tested for portability and adaptability and integration
related issues are solved during implementation.
Operation and Maintenance

This phase confirms the software operation in terms of more efficiency and less errors. If
required, the users are trained on, or aided with the documentation on how to operate the
software and how to keep the software operational. The software is maintained timely by
updating the code according to the changes taking place in user end environment or technology.
This phase may face challenges from hidden bugs and real-world unidentified problems.
Disposition
As time elapses, the software may decline on the performance front. It may go completely
obsolete or may need intense upgradation. Hence a pressing need to eliminate a major portion of
the system arises. This phase includes archiving data and required software components, closing
down the system, planning disposition activity and terminating system at appropriate end-of-
system time.
Software Development Paradigm

The software development paradigm helps developer to select a strategy to develop the
software. A software development paradigm has its own set of tools, methods and procedures,
which are expressed clearly and defines software development life cycle. A few of software
development paradigms or process models are defined as follows:
Waterfall Model
Waterfall model is the simplest model of software development paradigm. It says the all the
phases of SDLC will function one after another in linear manner. That is, when the first phase is
finished then only the second phase will start and so on.
This model assumes that everything is carried out and taken place perfectly as planned in the
previous stage and there is no need to think about the past issues that may arise in the next
phase. This model does not work smoothly if there are some issues left at the previous step. The
sequential nature of model does not allow us go back and undo or redo our actions.
This model is best suited when developers already have designed and developed similar
software in the past and are aware of all its domains.
Iterative Model
This model leads the software development process in iterations. It projects the process of
development in cyclic manner repeating every step after every cycle of SDLC process.
The software is first developed on very small scale and all the steps are followed which are
taken into consideration. Then, on every next iteration, more features and modules are designed,
coded, tested and added to the software. Every cycle produces a software, which is complete in
itself and has more features and capabilities than that of the previous one.
After each iteration, the management team can do work on risk management and prepare for the
next iteration. Because a cycle includes small portion of whole software process, it is easier to
manage the development process but it consumes more resources.
Spiral Model
Spiral model is a combination of both, iterative model and one of the SDLC model. It can be
seen as if you choose one SDLC model and combine it with cyclic process (iterative model).
This model considers risk, which often goes un-noticed by most other models. The model starts
with determining objectives and constraints of the software at the start of one iteration. Next
phase is of prototyping the software. This includes risk analysis. Then one standard SDLC
model is used to build the software. In the fourth phase of the plan of next iteration is prepared.
V model
The major drawback of waterfall model is we move to the next stage only when the previous
one is finished and there was no chance to go back if something is found wrong in later stages.
V-Model provides means of testing of software at each stage in reverse manner.
At every stage, test plans and test cases are created to verify and validate the product according
to the requirement of that stage. For example, in requirement gathering stage the test team
prepares all the test cases in correspondence to the requirements. Later, when the product is
developed and is ready for testing, test cases of this stage verify the software against its validity
towards requirements at this stage.
This makes both verification and validation go in parallel. This model is also known as
verification and validation model.
Big Bang Model

This model is the simplest model in its form. It requires little planning, lots of programming and
lots of funds. This model is conceptualized around the big bang of universe. As scientists say
that after big bang lots of galaxies, planets and stars evolved just as an event. Likewise, if we
put together lots of programming and funds, you may achieve the best software product.
For this model, very small amount of planning is required. It does not follow any process, or at
times the customer is not sure about the requirements and future needs. So the input
requirements are arbitrary.
This model is not suitable for large software projects but good one for learning and
experimenting.
The job pattern of an IT company engaged in software development can be

seen split in two parts:
Software Creation
Software Project Management
A project is well-defined task, which is a collection of several operations

done in order to achieve a goal (for example, software development and
delivery). A Project can be characterized as:
Every project may has a unique and distinct goal.
Project is not routine activity or day-to-day operations.
Project comes with a start time and end time.
Project ends when its goal is achieved hence it is a temporary phase in the
lifetime of an organization.
Project needs adequate resources in terms of time, manpower, finance, material

and knowledge-bank.
Software Project
A Software Project is the complete procedure of software development from
requirement gathering to testing and maintenance, carried out according to
the execution methodologies, in a specified period of time to achieve
intended software product.
Need of software project management

Software is said to be an intangible product. Software development is a kind
of all new stream in world business and theres very little experience in
building software products. Most software products are tailor made to fit
clients requirements. The most important is that the underlying technology
changes and advances so frequently and rapidly that experience of one
product may not be applied to the other one. All such business and
environmental constraints bring risk in software development hence it is
essential to manage software projects efficiently.
The image above shows triple constraints for software projects. It is an

essential part of software organization to deliver quality product, keeping
the cost within clients budget constrain and deliver the project as per
scheduled. There are several factors, both internal and external, which may
impact this triple constrain triangle. Any of three factor can severely impact
the other two.
Therefore, software project management is essential to incorporate user

requirements along with budget and time constraints.
Software Project Manager

A software project manager is a person who undertakes the responsibility of
executing the software project. Software project manager is thoroughly
aware of all the phases of SDLC that the software would go through. Project
manager may never directly involve in producing the end product but he
controls and manages the activities involved in production.
A project manager closely monitors the development process, prepares and

executes various plans, arranges necessary and adequate resources,
maintains communication among all team members in order to address
issues of cost, budget, resources, time, quality and customer satisfaction.
Let us see few responsibilities that a project manager shoulders -
Managing People
Act as project leader
Liaison with stakeholders
Managing human resources
Setting up reporting hierarchy etc.
Managing Project
Defining and setting up project scope
Managing project management activities
Monitoring progress and performance
Risk analysis at every phase
Take necessary step to avoid or come out of problems
Act as project spokesperson
Software Management Activities

Software project management comprises of a number of activities, which
contains planning of project, deciding scope of software product, estimation
of cost in various terms, scheduling of tasks and events, and resource
management. Project management activities may include:
Project Planning
Scope Management
Project Estimation
Project Planning
Software project planning is task, which is performed before the production
of software actually starts. It is there for the software production but
involves no concrete activity that has any direction connection with software
production; rather it is a set of multiple processes, which facilitates
software production. Project planning may include the following:
Scope Management
It defines the scope of project; this includes all the activities, process need
to be done in order to make a deliverable software product. Scope
management is essential because it creates boundaries of the project by
clearly defining what would be done in the project and what would not be
done. This makes project to contain limited and quantifiable tasks, which
can easily be documented and in turn avoids cost and time overrun.
During Project Scope management, it is necessary to -
Define the scope
Decide its verification and control
Divide the project into various smaller parts for ease of management.
Verify the scope
Control the scope by incorporating changes to the scope
Project Estimation
For an effective management accurate estimation of various measures is a
must. With correct estimation managers can manage and control the
project more efficiently and effectively.
Project estimation may involve the following:
Software size estimation
Software size may be estimated either in terms of KLOC (Kilo Line of Code) or
by calculating number of function points in the software. Lines of code depend
upon coding practices and Function points vary according to the user or
software requirement.
Effort estimation
The managers estimate efforts in terms of personnel requirement and man-hour

required to produce the software. For effort estimation software size should be
known. This can either be derived by managers experience, organizations
historical data or software size can be converted into efforts by using some
standard formulae.
Time estimation
Once size and efforts are estimated, the time required to produce the software
can be estimated. Efforts required is segregated into sub categories as per the
requirement specifications and interdependency of various components of
software. Software tasks are divided into smaller tasks, activities or events by
Work Breakthrough Structure (WBS). The tasks are scheduled on day-to-day
basis or in calendar months.
The sum of time required to complete all tasks in hours or days is the total time
invested to complete the project.
Cost estimation
This might be considered as the most difficult of all because it depends on more
elements than any of the previous ones. For estimating project cost, it is
required to consider -
o Size of software
o Software quality
o Hardware
o Additional software or tools, licenses etc.
o Skilled personnel with task-specific skills
o Travel involved
o Communication
o Training and support
Project Estimation Techniques

We discussed various parameters involving project estimation such as size,
effort, time and cost.
Project manager can estimate the listed factors using two broadly
recognized techniques
Decomposition Technique
This technique assumes the software as a product of various compositions.
There are two main models -
Line of Code Estimation is done on behalf of number of line of codes in the

software product.
Function Points Estimation is done on behalf of number of function points in

the software product.
Empirical Estimation Technique

This technique uses empirically derived formulae to make estimation.These
formulae are based on LOC or FPs.
Putnam Model
This model is made by Lawrence H. Putnam, which is based on Nordens

frequency distribution (Rayleigh curve). Putnam model maps time and efforts
required with software size.
COCOMO
COCOMO stands for COnstructive COst MOdel, developed by Barry W. Boehm. It

divides the software product into three categories of software: organic, semi-
detached and embedded.
Project Scheduling
Project Scheduling in a project refers to roadmap of all activities to be done
with specified order and within time slot allotted to each activity. Project
managers tend to define various tasks, and project milestones and them
arrange them keeping various factors in mind. They look for tasks lie in
critical path in the schedule, which are necessary to complete in specific
manner (because of task interdependency) and strictly within the time
allocated. Arrangement of tasks which lies out of critical path are less likely
to impact over all schedule of the project.
For scheduling a project, it is necessary to -
Break down the project tasks into smaller, manageable form
Find out various tasks and correlate them
Estimate time frame required for each task
Divide time into work-units
Assign adequate number of work-units for each task
Calculate total time required for the project from start to finish
Resource management
All elements used to develop a software product may be assumed as
resource for that project. This may include human resource, productive
tools and software libraries.
The resources are available in limited quantity and stay in the organization
as a pool of assets. The shortage of resources hampers the development of
project and it can lag behind the schedule. Allocating extra resources
increases development cost in the end. It is therefore necessary to estimate
and allocate adequate resources for the project.
Resource management includes -
Defining proper organization project by creating a project team and allocating

responsibilities to each team member
Determining resources required at a particular stage and their availability
Manage Resources by generating resource request when they are required and
de-allocating them when they are no more needed.
Project Risk Management

Risk management involves all activities pertaining to identification,
analyzing and making provision for predictable and non-predictable risks in
the project. Risk may include the following:
Experienced staff leaving the project and new staff coming in.
Change in organizational management.
Requirement change or misinterpreting requirement.

Under-estimation of required time and resources.
Technological changes, environmental changes, business competition.
Risk Management Process

There are following activities involved in risk management process:
Identification - Make note of all possible risks, which may occur in the project.
Categorize - Categorize known risks into high, medium and low risk intensity as
per their possible impact on the project.
Manage - Analyze the probability of occurrence of risks at various phases. Make

plan to avoid or face risks. Attempt to minimize their side-effects.
Monitor - Closely monitor the potential risks and their early symptoms. Also
monitor the effects of steps taken to mitigate or avoid them.
Project Execution & Monitoring

In this phase, the tasks described in project plans are executed according to
their schedules.
Execution needs monitoring in order to check whether everything is going

according to the plan. Monitoring is observing to check the probability of
risk and taking measures to address the risk or report the status of various
tasks.
These measures include -
Activity Monitoring - All activities scheduled within some task can be

monitored on day-to-day basis. When all activities in a task are completed, it is
considered as complete.
Status Reports - The reports contain status of activities and tasks completed
within a given time frame, generally a week. Status can be marked as finished,
pending or work-in-progress etc.
Milestones Checklist - Every project is divided into multiple phases where

major tasks are performed (milestones) based on the phases of SDLC. This
milestone checklist is prepared once every few weeks and reports the status of
milestones.
Project Communication Management
Effective communication plays vital role in the success of a project. It
bridges gaps between client and the organization, among the team
members as well as other stake holders in the project such as hardware
suppliers.
Communication can be oral or written. Communication management

process may have the following steps:
Planning - This step includes the identifications of all the stakeholders in the
project and the mode of communication among them. It also considers if any
additional communication facilities are required.
Sharing - After determining various aspects of planning, manager focuses on

sharing correct information with the correct person on correct time. This keeps
every one involved the project up to date with project progress and its status.
Feedback - Project managers use various measures and feedback mechanism

and create status and performance reports. This mechanism ensures that input
from various stakeholders is coming to the project manager as their feedback.
Closure - At the end of each major event, end of a phase of SDLC or end of the
project itself, administrative closure is formally announced to update every
stakeholder by sending email, by distributing a hardcopy of document or by
other mean of effective communication.
After closure, the team moves to next phase or project.
Configuration Management
Configuration management is a process of tracking and controlling the
changes in software in terms of the requirements, design, functions and
development of the product.
IEEE defines it as the process of identifying and defining the items in the
system, controlling the change of these items throughout their life cycle,
recording and reporting the status of items and change requests, and
verifying the completeness and correctness of items.
Generally, once the SRS is finalized there is less chance of requirement of
changes from user. If they occur, the changes are addressed only with prior
approval of higher management, as there is a possibility of cost and time
overrun.
Baseline
A phase of SDLC is assumed over if it baselined, i.e. baseline is a
measurement that defines completeness of a phase. A phase is baselined
when all activities pertaining to it are finished and well documented. If it
was not the final phase, its output would be used in next immediate phase.
Configuration management is a discipline of organization administration,

which takes care of occurrence of any change (process, requirement,
technological, strategical etc.) after a phase is baselined. CM keeps check
on any changes done in software.
Change Control
Change control is function of configuration management, which ensures that
all changes made to software system are consistent and made as per
organizational rules and regulations.
A change in the configuration of product goes through following steps -
Identification - A change request arrives from either internal or external

source. When change request is identified formally, it is properly documented.
Validation - Validity of the change request is checked and its handling

procedure is confirmed.
Analysis - The impact of change request is analyzed in terms of schedule, cost

and required efforts. Overall impact of the prospective change on system is
analyzed.
Control - If the prospective change either impacts too many entities in the
system or it is unavoidable, it is mandatory to take approval of high authorities
before change is incorporated into the system. It is decided if the change is
worth incorporation or not. If it is not, change request is refused formally.
Execution - If the previous phase determines to execute the change request,
this phase take appropriate actions to execute the change, does a thorough
revision if necessary.
Close request - The change is verified for correct implementation and merging
with the rest of the system. This newly incorporated change in the software is
documented properly and the request is formally is closed.
Project Management Tools

The risk and uncertainty rises multifold with respect to the size of the
project, even when the project is developed according to set methodologies.
There are tools available, which aid for effective project management. A few
are described -
Gantt Chart
Gantt charts was devised by Henry Gantt (1917). It represents project
schedule with respect to time periods. It is a horizontal bar chart with bars
representing activities and time scheduled for the project activities.
PERT Chart
PERT (Program Evaluation & Review Technique) chart is a tool that depicts
project as network diagram. It is capable of graphically representing main
events of project in both parallel and consecutive way. Events, which occur
one after another, show dependency of the later event over the previous
one.
Events are shown as numbered nodes. They are connected by labeled

arrows depicting sequence of tasks in the project.
Resource Histogram
This is a graphical tool that contains bar or chart representing number of
resources (usually skilled staff) required over time for a project event (or
phase). Resource Histogram is an effective tool for staff planning and
coordination.
Critical Path Analysis
This tools is useful in recognizing interdependent tasks in the project. It
also helps to find out the shortest path or critical path to complete the
project successfully. Like PERT diagram, each event is allotted a specific
time frame. This tool shows dependency of event assuming an event can
proceed to next only if the previous one is completed.
The events are arranged according to their earliest possible start time. Path
between start and end node is critical path which cannot be further reduced
and all events require to be executed in same order.
The software requirements are description of features and functionalities of

the target system. Requirements convey the expectations of users from the
software product. The requirements can be obvious or hidden, known or
unknown, expected or unexpected from clients point of view.
Requirement Engineering
The process to gather the software requirements from client, analyze and
document them is known as requirement engineering.
The goal of requirement engineering is to develop and maintain

sophisticated and descriptive System Requirements Specification
document.
Requirement Engineering Process

It is a four step process, which includes
Feasibility Study
Software Requirement Specification
Software Requirement Validation
Let us see the process briefly -
Feasibility study
When the client approaches the organization for getting the desired product
developed, it comes up with rough idea about what all functions the
software must perform and which all features are expected from the
software.
Referencing to this information, the analysts does a detailed study about

whether the desired system and its functionality are feasible to develop.
This feasibility study is focused towards goal of the organization. This study
analyzes whether the software product can be practically materialized in
terms of implementation, contribution of project to organization, cost
constraints and as per values and objectives of the organization. It explores
technical aspects of the project and product such as usability,
maintainability, productivity and integration ability.
The output of this phase should be a feasibility study report that should
contain adequate comments and recommendations for management about
whether or not the project should be undertaken.
If the feasibility report is positive towards undertaking the project, next
phase starts with gathering requirements from the user. Analysts and
engineers communicate with the client and end-users to know their ideas
on what the software should provide and which features they want the
software to include.
Software Requirement Specification

SRS is a document created by system analyst after the requirements are
collected from various stakeholders.
SRS defines how the intended software will interact with hardware, external
interfaces, speed of operation, response time of system, portability of
software across various platforms, maintainability, speed of recovery after
crashing, Security, Quality, Limitations etc.
The requirements received from client are written in natural language. It is

the responsibility of system analyst to document the requirements in
technical language so that they can be comprehended and useful by the
software development team.
SRS should come up with following features:
User Requirements are expressed in natural language.
Technical requirements are expressed in structured language, which is used

inside the organization.
Design description should be written in Pseudo code.
Format of Forms and GUI screen prints.
Conditional and mathematical notations for DFDs etc.
Software Requirement Validation

After requirement specifications are developed, the requirements mentioned
in this document are validated. User might ask for illegal, impractical
solution or experts may interpret the requirements incorrectly. This results
in huge increase in cost if not nipped in the bud. Requirements can be
checked against following conditions -
If they can be practically implemented
If they are valid and as per functionality and domain of software
If there are any ambiguities
If they are complete
If they can be demonstrated
Requirement Elicitation Process

Requirement elicitation process can be depicted using the folloiwng
diagram:
Requirements gathering - The developers discuss with the client and end
users and know their expectations from the software.
Organizing Requirements - The developers prioritize and arrange the

requirements in order of importance, urgency and convenience.
Negotiation & discussion - If requirements are ambiguous or there are some

conflicts in requirements of various stakeholders, if they are, it is then
negotiated and discussed with stakeholders. Requirements may then be
prioritized and reasonably compromised.
The requirements come from various stakeholders. To remove the ambiguity

and conflicts, they are discussed for clarity and correctness. Unrealistic
requirements are compromised reasonably.
Documentation - All formal & informal, functional and non-functional

requirements are documented and made available for next phase processing.
Requirement Elicitation Techniques

Requirements Elicitation is the process to find out the requirements for an
intended software system by communicating with client, end users, system
users and others who have a stake in the software system development.
There are various ways to discover requirements

Interviews
Interviews are strong medium to collect requirements. Organization may
conduct several types of interviews such as:
Structured (closed) interviews, where every single information to gather is

decided in advance, they follow pattern and matter of discussion firmly.
Non-structured (open) interviews, where information to gather is not decided in

advance, more flexible and less biased.
Oral interviews
Written interviews
One-to-one interviews which are held between two persons across the table.
Group interviews which are held between groups of participants. They help to
uncover any missing requirement as numerous people are involved.
Surveys
Organization may conduct surveys among various stakeholders by querying
about their expectation and requirements from the upcoming system.
Questionnaires
A document with pre-defined set of objective questions and respective
options is handed over to all stakeholders to answer, which are collected
and compiled.
A shortcoming of this technique is, if an option for some issue is not

mentioned in the questionnaire, the issue might be left unattended.
Task analysis
Team of engineers and developers may analyze the operation for which the
new system is required. If the client already has some software to perform
certain operation, it is studied and requirements of proposed system are
collected.
Domain Analysis
Every software falls into some domain category. The expert people in the
domain can be a great help to analyze general and specific requirements.
Brainstorming
An informal debate is held among various stakeholders and all their inputs
are recorded for further requirements analysis.
Prototyping
Prototyping is building user interface without adding detail functionality for
user to interpret the features of intended software product. It helps giving
better idea of requirements. If there is no software installed at clients end
for developers reference and the client is not aware of its own
requirements, the developer creates a prototype based on initially
mentioned requirements. The prototype is shown to the client and the
feedback is noted. The client feedback serves as an input for requirement
gathering.
Observation
Team of experts visit the clients organization or workplace. They observe
the actual working of the existing installed systems. They observe the
workflow at clients end and how execution problems are dealt. The team
itself draws some conclusions which aid to form requirements expected
from the software.
Software Requirements Characteristics

Gathering software requirements is the foundation of the entire software
development project. Hence they must be clear, correct and well-defined.
A complete Software Requirement Specifications must be:
Clear
Correct
Consistent
Coherent
Comprehensible
Modifiable
Verifiable
Prioritized
Unambiguous
Traceable
Credible source
Software Requirements
We should try to understand what sort of requirements may arise in the
requirement elicitation phase and what kinds of requirements are expected
from the software system.
Broadly software requirements should be categorized in two categories:
Functional Requirements
Requirements, which are related to functional aspect of software fall into
this category.
They define functions and functionality within and from the software
system.
EXAMPLES -
Search option given to user to search from various invoices.
User should be able to mail any report to management.
Users can be divided into groups and groups can be given separate rights.
Should comply business rules and administrative functions.
Software is developed keeping downward compatibility intact.
Non-Functional Requirements
Requirements, which are not related to functional aspect of software, fall
into this category. They are implicit or expected characteristics of software,
which users make assumption of.
Non-functional requirements include -
Security
Logging
Storage
Configuration
Performance
Cost
Interoperability
Flexibility
Disaster recovery
Accessibility
Requirements are categorized logically as
Must Have : Software cannot be said operational without them.
Should have : Enhancing the functionality of software.
Could have : Software can still properly function with these requirements.
Wish list : These requirements do not map to any objectives of software.
While developing software, Must have must be implemented, Should have

is a matter of debate with stakeholders and negation, whereas could have
and wish list can be kept for software updates.
User Interface requirements

UI is an important part of any software or hardware or hybrid system. A
software is widely accepted if it is -
easy to operate
quick in response
effectively handling operational errors
providing simple yet consistent user interface
User acceptance majorly depends upon how user can use the software. UI
is the only way for users to perceive the system. A well performing software
system must also be equipped with attractive, clear, consistent and
responsive user interface. Otherwise the functionalities of software system
can not be used in convenient way. A system is said be good if it provides
means to use it efficiently. User interface requirements are briefly
mentioned below -
Content presentation
Easy Navigation
Simple interface
Responsive
Consistent UI elements
Feedback mechanism
Default settings
Purposeful layout
Strategical use of color and texture.
Provide help information
User centric approach
Group based view settings.
Software System Analyst

System analyst in an IT organization is a person, who analyzes the
requirement of proposed system and ensures that requirements are
conceived and documented properly & correctly. Role of an analyst starts
during Software Analysis Phase of SDLC. It is the responsibility of analyst to
make sure that the developed software meets the requirements of the
client.
System Analysts have the following responsibilities:
Analyzing and understanding requirements of intended software
Understanding how the project will contribute in the organization objectives
Identify sources of requirement
Validation of requirement
Develop and implement requirement management plan
Documentation of business, technical, process and product requirements
Coordination with clients to prioritize requirements and remove and ambiguity
Finalizing acceptance criteria with client and other stakeholders
Software Metrics and Measures

Software Measures can be understood as a process of quantifying and
symbolizing various attributes and aspects of software.
Software Metrics provide measures for various aspects of software process

and software product.
Software measures are fundamental requirement of software engineering.

They not only help to control the software development process but also aid
to keep quality of ultimate product excellent.
According to Tom DeMarco, a (Software Engineer), You cannot control

what you cannot measure. By his saying, it is very clear how important
software measures are.
Let us see some software metrics:
Size Metrics - LOC (Lines of Code), mostly calculated in thousands of delivered

source code lines, denoted as KLOC.
Function Point Count is measure of the functionality provided by the software.

Function Point count defines the size of functional aspect of software.
Complexity Metrics - McCabes Cyclomatic complexity quantifies the upper

bound of the number of independent paths in a program, which is perceived as
complexity of the program or its modules. It is represented in terms of graph
theory concepts by using control flow graph.
Quality Metrics - Defects, their types and causes, consequence, intensity of

severity and their implications define the quality of product.
The number of defects found in development process and number of defects

reported by the client after the product is installed or delivered at client-end,
define quality of product.
Process Metrics - In various phases of SDLC, the methods and tools used, the
company standards and the performance of development are software process
metrics.
Resource Metrics - Effort, time and various resources used, represents metrics
for resource measurement.
Software design is a process to transform user requirements into some
suitable form, which helps the programmer in software coding and
implementation.
For assessing user requirements, an SRS (Software Requirement

Specification) document is created whereas for coding and implementation,
there is a need of more specific and detailed requirements in software
terms. The output of this process can directly be used into implementation
in programming languages.
Software design is the first step in SDLC (Software Design Life Cycle),
which moves the concentration from problem domain to solution domain. It
tries to specify how to fulfill the requirements mentioned in SRS.
Software Design Levels

Software design yields three levels of results:
Architectural Design - The architectural design is the highest abstract version

of the system. It identifies the software as a system with many components
interacting with each other. At this level, the designers get the idea of proposed
solution domain.
High-level Design- The high-level design breaks the single entity-multiple

component concept of architectural design into less-abstracted view of sub-
systems and modules and depicts their interaction with each other. High-level
design focuses on how the system along with all of its components can be
implemented in forms of modules. It recognizes modular structure of each sub-
system and their relation and interaction among each other.
Detailed Design- Detailed design deals with the implementation part of what is
seen as a system and its sub-systems in the previous two designs. It is more
detailed towards modules and their implementations. It defines logical structure
of each module and their interfaces to communicate with other modules.
MIDTERM PERIOD
Modularization
Modularization is a technique to divide a software system into multiple
discrete and independent modules, which are expected to be capable of
carrying out task(s) independently. These modules may work as basic
constructs for the entire software. Designers tend to design modules such
that they can be executed and/or compiled separately and independently.
Modular design unintentionally follows the rules of divide and conquer

problem-solving strategy this is because there are many other benefits
attached with the modular design of a software.
Advantage of modularization:
Smaller components are easier to maintain
Program can be divided based on functional aspects
Desired level of abstraction can be brought in the program
Components with high cohesion can be re-used again
Concurrent execution can be made possible
Desired from security aspect
Concurrency
Back in time, all software are meant to be executed sequentially. By
sequential execution we mean that the coded instruction will be executed
one after another implying only one portion of program being activated at
any given time. Say, a software has multiple modules, then only one of all
the modules can be found active at any time of execution.
In software design, concurrency is implemented by splitting the software

into multiple independent units of execution, like modules and executing
them in parallel. In other words, concurrency provides capability to the
software to execute more than one part of code in parallel to each other.
It is necessary for the programmers and designers to recognize those

modules, which can be made parallel execution.
Example
The spell check feature in word processor is a module of software, which
runs along side the word processor itself.
Coupling and Cohesion
When a software program is modularized, its tasks are divided into several
modules based on some characteristics. As we know, modules are set of
instructions put together in order to achieve some tasks. They are though,
considered as single entity but may refer to each other to work together.
There are measures by which the quality of a design of modules and their
interaction among them can be measured. These measures are called
coupling and cohesion.
Cohesion
Cohesion is a measure that defines the degree of intra-dependability within
elements of a module. The greater the cohesion, the better is the program
design.
There are seven types of cohesion, namely
Co-incidental cohesion - It is unplanned and random cohesion, which might be

the result of breaking the program into smaller modules for the sake of
modularization. Because it is unplanned, it may serve confusion to the
programmers and is generally not-accepted.
Logical cohesion - When logically categorized elements are put together into a
module, it is called logical cohesion.
Temporal Cohesion - When elements of module are organized such that they
are processed at a similar point in time, it is called temporal cohesion.
Procedural cohesion - When elements of module are grouped together, which

are executed sequentially in order to perform a task, it is called procedural
cohesion.
Communicational cohesion - When elements of module are grouped together,

which are executed sequentially and work on same data (information), it is called
communicational cohesion.
Sequential cohesion - When elements of module are grouped because the

output of one element serves as input to another and so on, it is called
sequential cohesion.
Functional cohesion - It is considered to be the highest degree of cohesion,
and it is highly expected. Elements of module in functional cohesion are grouped
because they all contribute to a single well-defined function. It can also be
reused.
Coupling
Coupling is a measure that defines the level of inter-dependability among
modules of a program. It tells at what level the modules interfere and
interact with each other. The lower the coupling, the better the program.
There are five levels of coupling, namely -
Content coupling - When a module can directly access or modify or refer to the
content of another module, it is called content level coupling.
Common coupling- When multiple modules have read and write access to
some global data, it is called common or global coupling.
Control coupling- Two modules are called control-coupled if one of them

decides the function of the other module or changes its flow of execution.
Stamp coupling- When multiple modules share common data structure and
work on different part of it, it is called stamp coupling.
Data coupling- Data coupling is when two modules interact with each other by
means of passing data (as parameter). If a module passes data structure as
parameter, then the receiving module should use all its components.
Ideally, no coupling is considered to be the best.
Design Verification
The output of software design process is design documentation, pseudo
codes, detailed logic diagrams, process diagrams, and detailed description
of all functional or non-functional requirements.
The next phase, which is the implementation of software, depends on all

outputs mentioned above.
It is then becomes necessary to verify the output before proceeding to the

next phase. The early any mistake is detected, the better it is or it might
not be detected until testing of the product. If the outputs of design phase
are in formal notation form, then their associated tools for verification
should be used otherwise a thorough design review can be used for
verification and validation.
By structured verification approach, reviewers can detect defects that might

be caused by overlooking some conditions. A good design review is
important for good software design, accuracy and quality.
Software analysis and design includes all activities, which help the
transformation of requirement specification into implementation.
Requirement specifications specify all functional and non-functional
expectations from the software. These requirement specifications come in
the shape of human readable and understandable documents, to which a
computer has nothing to do.
Software analysis and design is the intermediate stage, which helps human-
readable requirements to be transformed into actual code.
Let us see few analysis and design tools used by software designers:
Data Flow Diagram

Data flow diagram is graphical representation of flow of data in an
information system. It is capable of depicting incoming data flow, outgoing
data flow and stored data. The DFD does not mention anything about how
data flows through the system.
There is a prominent difference between DFD and Flowchart. The flowchart

depicts flow of control in program modules. DFDs depict flow of data in the
system at various levels. DFD does not contain any control or branch
elements.
Types of DFD
Data Flow Diagrams are either Logical or Physical.
Logical DFD - This type of DFD concentrates on the system process, and flow of
data in the system.For example in a Banking software system, how data is
moved between different entities.
Physical DFD - This type of DFD shows how the data flow is actually
implemented in the system. It is more specific and close to the implementation.
DFD Components
DFD can represent Source, destination, storage and flow of data using the
following set of components -
Entities - Entities are source and destination of information data. Entities are
represented by a rectangles with their respective names.
Process - Activities and action taken on the data are represented by Circle or
Round-edged rectangles.
Data Storage - There are two variants of data storage - it can either be
represented as a rectangle with absence of both smaller sides or as an open-
sided rectangle with only one side missing.
Data Flow - Movement of data is shown by pointed arrows. Data movement is

shown from the base of arrow as its source towards head of the arrow as
destination.
Levels of DFD
Level 0 - Highest abstraction level DFD is known as Level 0 DFD, which depicts
the entire information system as one diagram concealing all the underlying
details. Level 0 DFDs are also known as context level DFDs.
Level 1 - The Level 0 DFD is broken down into more specific, Level 1 DFD. Level
1 DFD depicts basic modules in the system and flow of data among various
modules. Level 1 DFD also mentions basic processes and sources of information.
Level 2 - At this level, DFD shows how data flows inside the modules mentioned
in Level 1.
Higher level DFDs can be transformed into more specific lower level DFDs with
deeper level of understanding unless the desired level of specification is
achieved.
Structure Charts
Structure chart is a chart derived from Data Flow Diagram. It represents
the system in more detail than DFD. It breaks down the entire system into
lowest functional modules, describes functions and sub-functions of each
module of the system to a greater detail than DFD.
Structure chart represents hierarchical structure of modules. At each layer a

specific task is performed.
Here are the symbols used in construction of structure charts -
Module - It represents process or subroutine or task. A control module branches

to more than one sub-module. Library Modules are re-usable and invokable from
any module.
Condition - It is represented by small diamond at the base of module. It depicts

that control module can select any of sub-routine based on some condition.
Jump - An arrow is shown pointing inside the module to depict that the control
will jump in the middle of the sub-module.

Loop - A curved arrow represents loop in the module. All sub-modules covered
by loop repeat execution of module.
Data flow - A directed arrow with empty circle at the end represents data flow.
Control flow - A directed arrow with filled circle at the end represents control
flow.
HIPO Diagram
HIPO (Hierarchical Input Process Output) diagram is a combination of two
organized method to analyze the system and provide the means of
documentation. HIPO model was developed by IBM in year 1970.
HIPO diagram represents the hierarchy of modules in the software system.

Analyst uses HIPO diagram in order to obtain high-level view of system
functions. It decomposes functions into sub-functions in a hierarchical
manner. It depicts the functions performed by system.
HIPO diagrams are good for documentation purpose. Their graphical

representation makes it easier for designers and managers to get the
pictorial idea of the system structure.
In contrast to IPO (Input Process Output) diagram, which depicts the flow
of control and data in a module, HIPO does not provide any information
about data flow or control flow.
Example
Both parts of HIPO diagram, Hierarchical presentation and IPO Chart are
used for structure design of software program as well as documentation of
the same.
Structured English
Most programmers are unaware of the large picture of software so they
only rely on what their managers tell them to do. It is the responsibility of
higher software management to provide accurate information to the
programmers to develop accurate yet fast code.
Other forms of methods, which use graphs or diagrams, may are sometimes
interpreted differently by different people.
Hence, analysts and designers of the software come up with tools such as
Structured English. It is nothing but the description of what is required to
code and how to code it. Structured English helps the programmer to write
error-free code.
Other form of methods, which use graphs or diagrams, may are sometimes
interpreted differently by different people. Here, both Structured English
and Pseudo-Code tries to mitigate that understanding gap.
Structured English is the It uses plain English words in structured

programming paradigm. It is not the ultimate code but a kind of description
what is required to code and how to code it. The following are some tokens
of structured programming.
IF-THEN-ELSE,
DO-WHILE-UNTIL
Analyst uses the same variable and data name, which are stored in Data
Dictionary, making it much simpler to write and understand the code.
Example
We take the same example of Customer Authentication in the online
shopping environment. This procedure to authenticate customer can be
written in Structured English as:
Enter Customer_Name
SEEK Customer_Name in Customer_Name_DB file
IF Customer_Name found THEN
Call procedure USER_PASSWORD_AUTHENTICATE()
ELSE
PRINT error message
Call procedure NEW_CUSTOMER_REQUEST()
ENDIF
The code written in Structured English is more like day-to-day spoken

English. It can not be implemented directly as a code of software.
Structured English is independent of programming language.
Pseudo-Code
Pseudo code is written more close to programming language. It may be
considered as augmented programming language, full of comments and
descriptions.
Pseudo code avoids variable declaration but they are written using some
actual programming languages constructs, like C, Fortran, Pascal etc.
Pseudo code contains more programming details than Structured English. It

provides a method to perform the task, as if a computer is executing the
code.
Example
Program to print Fibonacci up to n numbers.
void function Fibonacci

Get value of n;
Set value of a to 1;
Set value of b to 1;
Initialize I to 0
for (i=0; i< n; i++)
{
if a greater than b
{
Increase b by a;
Print b;
}
else if b greater than a
{
increase a by b;
print a;
}
}
Decision Tables
A Decision table represents conditions and the respective actions to be
taken to address them, in a structured tabular format.
It is a powerful tool to debug and prevent errors. It helps group similar

information into a single table and then by combining tables it delivers easy
and convenient decision-making.
Creating Decision Table

To create the decision table, the developer must follow basic four steps:
Identify all possible conditions to be addressed
Determine actions for all identified conditions
Create Maximum possible rules
Define action for each rule
Decision Tables should be verified by end-users and can lately be simplified

by eliminating duplicate rules and actions.
Example
Let us take a simple example of day-to-day problem with our Internet
connectivity. We begin by identifying all problems that can arise while
starting the internet and their respective possible solutions.
We list all possible problems under column conditions and the prospective
actions under column Actions.
Conditions/Actions Rules
Conditions Shows Connected N N N N Y Y Y Y

Ping is Working N N Y Y N N Y Y
Opens Website Y N Y N Y N Y N
Check network cable X
Check internet router X X X X
Actions Restart Web Browser X
Contact Service provider X X X X X X
Do no action
Table : Decision Table In-house Internet Troubleshooting
Entity-Relationship Model
Entity-Relationship model is a type of database model based on the notion
of real world entities and relationship among them. We can map real world
scenario onto ER database model. ER Model creates a set of entities with
their attributes, a set of constraints and relation among them.
ER Model is best used for the conceptual design of database. ER Model can
be represented as follows :
Entity - An entity in ER Model is a real world being, which has some properties
called attributes. Every attribute is defined by its corresponding set of values,
called domain.
For example, Consider a school database. Here, a student is an entity. Student

has various attributes like name, id, age and class etc.
Relationship - The logical association among entities is called relationship.
Relationships are mapped with entities in various ways. Mapping cardinalities
define the number of associations between two entities.
Mapping cardinalities:
o one to one
o one to many
o many to one
o many to many
Data Dictionary
Data dictionary is the centralized collection of information about data. It
stores meaning and origin of data, its relationship with other data, data
format for usage etc. Data dictionary has rigorous definitions of all names in
order to facilitate user and software designers.
Data dictionary is often referenced as meta-data (data about data)

repository. It is created along with DFD (Data Flow Diagram) model of
software program and is expected to be updated whenever DFD is changed
or updated.
Requirement of Data Dictionary

The data is referenced via data dictionary while designing and implementing
software. Data dictionary removes any chances of ambiguity. It helps
keeping work of programmers and designers synchronized while using same
object reference everywhere in the program.
Data dictionary provides a way of documentation for the complete database

system in one place. Validation of DFD is carried out using data dictionary.
Contents
Data dictionary should contain information about the following
Data Flow
Data Structure
Data Elements
Data Stores
Data Processing
Data Flow is described by means of DFDs as studied earlier and represented

in algebraic form as described.
= Composed of
{} Repetition
() Optional
+ And
[/] Or
Example
Address = House No + (Street / Area) + City + State
Course ID = Course Number + Course Name + Course Level + Course

Grades
Data Elements
Data elements consist of Name and descriptions of Data and Control Items,
Internal or External data stores etc. with the following details:
Primary Name
Secondary Name (Alias)
Use-case (How and where to use)
Content Description (Notation etc. )
Supplementary Information (preset values, constraints etc.)
Data Store
It stores the information from where the data enters into the system and
exists out of the system. The Data Store may include -
Files
o Internal to software.
o External to software but on the same machine.
o External to software and system, located on different machine.
Tables
o Naming convention
o Indexing property
Data Processing
There are two types of Data Processing:
Logical: As user sees it
Physical: As software sees it
Software design is a process to conceptualize the software requirements

into software implementation. Software design takes the user requirements
as challenges and tries to find optimum solution. While the software is being
conceptualized, a plan is chalked out to find the best possible design for
implementing the intended solution.
There are multiple variants of software design. Let us study them briefly:
Structured Design
Structured design is a conceptualization of problem into several well-
organized elements of solution. It is basically concerned with the solution
design. Benefit of structured design is, it gives better understanding of how
the problem is being solved. Structured design also makes it simpler for
designer to concentrate on the problem more accurately.
Structured design is mostly based on divide and conquer strategy where a

problem is broken into several small problems and each small problem is
individually solved until the whole problem is solved.
The small pieces of problem are solved by means of solution modules.

Structured design emphasis that these modules be well organized in order
to achieve precise solution.
These modules are arranged in hierarchy. They communicate with each
other. A good structured design always follows some rules for
communication among multiple modules, namely -
Cohesion - grouping of all functionally related elements.
Coupling - communication between different modules.
A good structured design has high cohesion and low coupling arrangements.
Function Oriented Design

In function-oriented design, the system is comprised of many smaller sub-
systems known as functions. These functions are capable of performing
significant task in the system. The system is considered as top view of all
functions.
Function oriented design inherits some properties of structured design

where divide and conquer methodology is used.
This design mechanism divides the whole system into smaller functions,
which provides means of abstraction by concealing the information and
their operation.. These functional modules can share information among
themselves by means of information passing and using information
available globally.
Another characteristic of functions is that when a program calls a function,

the function changes the state of the program, which sometimes is not
acceptable by other modules. Function oriented design works well where
the system state does not matter and program/functions work on input
rather than on a state.
Design Process
The whole system is seen as how data flows in the system by means of data flow
diagram.
DFD depicts how functions changes data and state of entire system.
The entire system is logically broken down into smaller units known as functions
on the basis of their operation in the system.
Each function is then described at large.
Object Oriented Design

Object oriented design works around the entities and their characteristics
instead of functions involved in the software system. This design strategies
focuses on entities and its characteristics. The whole concept of software
solution revolves around the engaged entities.
Let us see the important concepts of Object Oriented Design:
Objects - All entities involved in the solution design are known as objects. For
example, person, banks, company and customers are treated as objects. Every
entity has some attributes associated to it and has some methods to perform on
the attributes.
Classes - A class is a generalized description of an object. An object is an

instance of a class. Class defines all the attributes, which an object can have
and methods, which defines the functionality of the object.
In the solution design, attributes are stored as variables and functionalities are
defined by means of methods or procedures.
Encapsulation - In OOD, the attributes (data variables) and methods (operation

on the data) are bundled together is called encapsulation. Encapsulation not only
bundles important information of an object together, but also restricts access of
the data and methods from the outside world. This is called information hiding.
Inheritance - OOD allows similar classes to stack up in hierarchical manner

where the lower or sub-classes can import, implement and re-use allowed
variables and methods from their immediate super classes. This property of OOD
is known as inheritance. This makes it easier to define specific class and to
create generalized classes from specific ones.
Polymorphism - OOD languages provide a mechanism where methods

performing similar tasks but vary in arguments, can be assigned same name.
This is called polymorphism, which allows a single interface performing tasks for
different types. Depending upon how the function is invoked, respective portion
of the code gets executed.
Design Process
Software design process can be perceived as series of well-defined steps.
Though it varies according to design approach (function oriented or object
oriented, yet It may have the following steps involved:
A solution design is created from requirement or previous used system and/or

system sequence diagram.
Objects are identified and grouped into classes on behalf of similarity in attribute
characteristics.
Class hierarchy and relation among them is defined.
Application framework is defined.
Software Design Approaches

Here are two generic approaches for software designing:
Top Down Design

We know that a system is composed of more than one sub-systems and it
contains a number of components. Further, these sub-systems and
components may have their on set of sub-system and components and
creates hierarchical structure in the system.
Top-down design takes the whole software system as one entity and then
decomposes it to achieve more than one sub-system or component based
on some characteristics. Each sub-system or component is then treated as
a system and decomposed further. This process keeps on running until the
lowest level of system in the top-down hierarchy is achieved.
Top-down design starts with a generalized model of system and keeps on

defining the more specific part of it. When all components are composed the
whole system comes into existence.
Top-down design is more suitable when the software solution needs to be

designed from scratch and specific details are unknown.
Bottom-up Design
The bottom up design model starts with most specific and basic
components. It proceeds with composing higher level of components by
using basic or lower level components. It keeps creating higher level
components until the desired system is not evolved as one single
component. With each higher level, the amount of abstraction is increased.
Bottom-up strategy is more suitable when a system needs to be created

from some existing system, where the basic primitives can be used in the
newer system.
Both, top-down and bottom-up approaches are not practical individually.

Instead, a good combination of both is used.

Structured Design



functions.

available globally.

Design Process
diagram.

the attributes.




Design Process

characteristics.

Top Down Design



Bottom-up Design

newer system.


Structured Design



functions.

available globally.

Design Process
diagram.

the attributes.




Design Process

characteristics.

Top Down Design



Bottom-up Design

newer system.

User interface is the front-end application view to which user interacts in

order to use the software. User can manipulate and control the software as
well as hardware by means of user interface. Today, user interface is found
at almost every place where digital technology exists, right from computers,
mobile phones, cars, music players, airplanes, ships etc.
User interface is part of software and is designed such a way that it is

expected to provide the user insight of the software. UI provides
fundamental platform for human-computer interaction.
UI can be graphical, text-based, audio-video based, depending upon the

underlying hardware and software combination. UI can be hardware or
software or a combination of both.
The software becomes more popular if its user interface is:
Attractive
Simple to use
Responsive in short time
Clear to understand
Consistent on all interfacing screens
UI is broadly divided into two categories:

Command Line Interface
Graphical User Interface
Command Line Interface (CLI)

CLI has been a great tool of interaction with computers until the video
display monitors came into existence. CLI is first choice of many technical
users and programmers. CLI is minimum interface a software can provide to
its users.
CLI provides a command prompt, the place where the user types the
command and feeds to the system. The user needs to remember the syntax
of command and its use. Earlier CLI were not programmed to handle the
user errors effectively.
A command is a text-based reference to set of instructions, which are

expected to be executed by the system. There are methods like macros,
scripts that make it easy for the user to operate.
CLI uses less amount of computer resource as compared to GUI.
CLI Elements
A text-based command line interface can have the following elements:
Command Prompt - It is text-based notifier that is mostly shows the context in

which the user is working. It is generated by the software system.
Cursor - It is a small horizontal line or a vertical bar of the height of line, to

represent position of character while typing. Cursor is mostly found in blinking
state. It moves as the user writes or deletes something.
Command - A command is an executable instruction. It may have one or more

parameters. Output on command execution is shown inline on the screen. When
output is produced, command prompt is displayed on the next line.

Graphical User Interface provides the user graphical means to interact with
the system. GUI can be combination of both hardware and software. Using
GUI, user interprets the software.
Typically, GUI is more resource consuming than that of CLI. With advancing
technology, the programmers and designers create complex GUI designs
that work with more efficiency, accuracy and speed.
GUI Elements
GUI provides a set of components to interact with software or hardware.
Every graphical component provides a way to work with the system. A GUI
system has following elements such as:
Window - An area where contents of application are displayed. Contents in a
window can be displayed in the form of icons or lists, if the window represents
file structure. It is easier for a user to navigate in the file system in an exploring
window. Windows can be minimized, resized or maximized to the size of screen.
They can be moved anywhere on the screen. A window may contain another
window of the same application, called child window.
Tabs - If an application allows executing multiple instances of itself, they appear

on the screen as separate windows. Tabbed Document Interface has come
up to open multiple documents in the same window. This interface also helps in
viewing preference panel in application. All modern web-browsers use this
feature.
Menu - Menu is an array of standard commands, grouped together and placed

at a visible place (usually top) inside the application window. The menu can be
programmed to appear or hide on mouse clicks.
Icon - An icon is small picture representing an associated application. When

these icons are clicked or double clicked, the application window is opened. Icon
displays application and programs installed on a system in the form of small
pictures.
Cursor - Interacting devices such as mouse, touch pad, digital pen are
represented in GUI as cursors. On screen cursor follows the instructions from
hardware in almost real-time. Cursors are also named pointers in GUI systems.
They are used to select menus, windows and other application features.
Application specific GUI components

A GUI of an application contains one or more of the listed GUI elements:
Application Window - Most application windows uses the constructs supplied

by operating systems but many use their own customer created windows to
contain the contents of application.
Dialogue Box - It is a child window that contains message for the user and
request for some action to be taken. For Example: Application generate a
dialogue to get confirmation from user to delete a file.
Text-Box - Provides an area for user to type and enter text-based data.
Buttons - They imitate real life buttons and are used to submit inputs to the
software.
Radio-button - Displays available options for selection. Only one can be
selected among all offered.
Check-box - Functions similar to list-box. When an option is selected, the box is

marked as checked. Multiple options represented by check boxes can be
selected.
List-box - Provides list of available items for selection. More than one item can
be selected.
Other impressive GUI components are:
Sliders
Combo-box
Data-grid
Drop-down list
User Interface Design Activities

There are a number of activities performed for designing user interface. The
process of GUI design and implementation is alike SDLC. Any model can be
used for GUI implementation among Waterfall, Iterative or Spiral Model.
A model used for GUI design and development should fulfill these GUI
specific steps.
GUI Requirement Gathering - The designers may like to have list of all
functional and non-functional requirements of GUI. This can be taken from user
and their existing software solution.
User Analysis - The designer studies who is going to use the software GUI. The
target audience matters as the design details change according to the
knowledge and competency level of the user. If user is technical savvy,
advanced and complex GUI can be incorporated. For a novice user, more
information is included on how-to of software.
Task Analysis - Designers have to analyze what task is to be done by the

software solution. Here in GUI, it does not matter how it will be done. Tasks can
be represented in hierarchical manner taking one major task and dividing it
further into smaller sub-tasks. Tasks provide goals for GUI presentation. Flow of
information among sub-tasks determines the flow of GUI contents in the
software.
GUI Design & implementation - Designers after having information about
requirements, tasks and user environment, design the GUI and implements into
code and embed the GUI with working or dummy software in the background. It
is then self-tested by the developers.
Testing - GUI testing can be done in various ways. Organization can have in-
house inspection, direct involvement of users and release of beta version are
few of them. Testing may include usability, compatibility, user acceptance etc.
GUI Implementation Tools

There are several tools available using which the designers can create
entire GUI on a mouse click. Some tools can be embedded into the software
environment (IDE).
GUI implementation tools provide powerful array of GUI controls. For

software customization, designers can change the code accordingly.
There are different segments of GUI tools according to their different use
and platform.
Example
Mobile GUI, Computer GUI, Touch-Screen GUI etc. Here is a list of few tools
which come handy to build GUI:
FLUID
AppInventor (Android)
LucidChart
Wavemaker
Visual Studio
User Interface Golden rules

The following rules are mentioned to be the golden rules for GUI design,
described by Shneiderman and Plaisant in their book (Designing the User
Interface).
Strive for consistency - Consistent sequences of actions should be required in
similar situations. Identical terminology should be used in prompts, menus, and
help screens. Consistent commands should be employed throughout.
Enable frequent users to use short-cuts - The users desire to reduce the
number of interactions increases with the frequency of use. Abbreviations,
function keys, hidden commands, and macro facilities are very helpful to an
expert user.
Offer informative feedback - For every operator action, there should be some
system feedback. For frequent and minor actions, the response must be
modest, while for infrequent and major actions, the response must be more
substantial.
Design dialog to yield closure - Sequences of actions should be organized

into groups with a beginning, middle, and end. The informative feedback at the
completion of a group of actions gives the operators the satisfaction of
accomplishment, a sense of relief, the signal to drop contingency plans and
options from their minds, and this indicates that the way ahead is clear to
prepare for the next group of actions.
Offer simple error handling - As much as possible, design the system so the
user will not make a serious error. If an error is made, the system should be
able to detect it and offer simple, comprehensible mechanisms for handling the
error.
Permit easy reversal of actions - This feature relieves anxiety, since the user
knows that errors can be undone. Easy reversal of actions encourages
exploration of unfamiliar options. The units of reversibility may be a single
action, a data entry, or a complete group of actions.
Support internal locus of control - Experienced operators strongly desire the

sense that they are in charge of the system and that the system responds to
their actions. Design the system to make users the initiators of actions rather
than the responders.
Reduce short-term memory load - The limitation of human information

processing in short-term memory requires the displays to be kept simple,
multiple page displays be consolidated, window-motion frequency be reduced,
and sufficient training time be allotted for codes, mnemonics, and sequences of
actions.
User interface is the front-end application view to which user interacts in

order to use the software. User can manipulate and control the software as
well as hardware by means of user interface. Today, user interface is found
at almost every place where digital technology exists, right from computers,
mobile phones, cars, music players, airplanes, ships etc.
User interface is part of software and is designed such a way that it is

expected to provide the user insight of the software. UI provides
fundamental platform for human-computer interaction.
UI can be graphical, text-based, audio-video based, depending upon the

underlying hardware and software combination. UI can be hardware or
software or a combination of both.
The software becomes more popular if its user interface is:
Attractive
Simple to use
Responsive in short time
Clear to understand
Consistent on all interfacing screens
UI is broadly divided into two categories:
Command Line Interface
Command Line Interface (CLI)

CLI has been a great tool of interaction with computers until the video
display monitors came into existence. CLI is first choice of many technical
users and programmers. CLI is minimum interface a software can provide to
its users.
CLI provides a command prompt, the place where the user types the
command and feeds to the system. The user needs to remember the syntax
of command and its use. Earlier CLI were not programmed to handle the
user errors effectively.
A command is a text-based reference to set of instructions, which are

expected to be executed by the system. There are methods like macros,
scripts that make it easy for the user to operate.
CLI uses less amount of computer resource as compared to GUI.
CLI Elements
A text-based command line interface can have the following elements:
Command Prompt - It is text-based notifier that is mostly shows the context in

which the user is working. It is generated by the software system.
Cursor - It is a small horizontal line or a vertical bar of the height of line, to

represent position of character while typing. Cursor is mostly found in blinking
state. It moves as the user writes or deletes something.
Command - A command is an executable instruction. It may have one or more
parameters. Output on command execution is shown inline on the screen. When
output is produced, command prompt is displayed on the next line.

Graphical User Interface provides the user graphical means to interact with
the system. GUI can be combination of both hardware and software. Using
GUI, user interprets the software.
Typically, GUI is more resource consuming than that of CLI. With advancing
technology, the programmers and designers create complex GUI designs
that work with more efficiency, accuracy and speed.
GUI Elements
GUI provides a set of components to interact with software or hardware.
Every graphical component provides a way to work with the system. A GUI
system has following elements such as:
Window - An area where contents of application are displayed. Contents in a

window can be displayed in the form of icons or lists, if the window represents
file structure. It is easier for a user to navigate in the file system in an exploring
window. Windows can be minimized, resized or maximized to the size of screen.
They can be moved anywhere on the screen. A window may contain another
window of the same application, called child window.
Tabs - If an application allows executing multiple instances of itself, they appear

on the screen as separate windows. Tabbed Document Interface has come
up to open multiple documents in the same window. This interface also helps in
viewing preference panel in application. All modern web-browsers use this
feature.
Menu - Menu is an array of standard commands, grouped together and placed

at a visible place (usually top) inside the application window. The menu can be
programmed to appear or hide on mouse clicks.
Icon - An icon is small picture representing an associated application. When

these icons are clicked or double clicked, the application window is opened. Icon
displays application and programs installed on a system in the form of small
pictures.
Cursor - Interacting devices such as mouse, touch pad, digital pen are
represented in GUI as cursors. On screen cursor follows the instructions from
hardware in almost real-time. Cursors are also named pointers in GUI systems.
They are used to select menus, windows and other application features.
Application specific GUI components

A GUI of an application contains one or more of the listed GUI elements:
Application Window - Most application windows uses the constructs supplied

by operating systems but many use their own customer created windows to
contain the contents of application.
Dialogue Box - It is a child window that contains message for the user and
request for some action to be taken. For Example: Application generate a
dialogue to get confirmation from user to delete a file.
Text-Box - Provides an area for user to type and enter text-based data.
Buttons - They imitate real life buttons and are used to submit inputs to the
software.
Radio-button - Displays available options for selection. Only one can be

selected among all offered.
Check-box - Functions similar to list-box. When an option is selected, the box is

marked as checked. Multiple options represented by check boxes can be
selected.
List-box - Provides list of available items for selection. More than one item can
be selected.
Other impressive GUI components are:
Sliders
Combo-box
Data-grid
Drop-down list
User Interface Design Activities

There are a number of activities performed for designing user interface. The
process of GUI design and implementation is alike SDLC. Any model can be
used for GUI implementation among Waterfall, Iterative or Spiral Model.
A model used for GUI design and development should fulfill these GUI
specific steps.
GUI Requirement Gathering - The designers may like to have list of all
functional and non-functional requirements of GUI. This can be taken from user
and their existing software solution.
User Analysis - The designer studies who is going to use the software GUI. The
target audience matters as the design details change according to the
knowledge and competency level of the user. If user is technical savvy,
advanced and complex GUI can be incorporated. For a novice user, more
information is included on how-to of software.
Task Analysis - Designers have to analyze what task is to be done by the

software solution. Here in GUI, it does not matter how it will be done. Tasks can
be represented in hierarchical manner taking one major task and dividing it
further into smaller sub-tasks. Tasks provide goals for GUI presentation. Flow of
information among sub-tasks determines the flow of GUI contents in the
software.
GUI Design & implementation - Designers after having information about

requirements, tasks and user environment, design the GUI and implements into
code and embed the GUI with working or dummy software in the background. It
is then self-tested by the developers.
Testing - GUI testing can be done in various ways. Organization can have in-
house inspection, direct involvement of users and release of beta version are
few of them. Testing may include usability, compatibility, user acceptance etc.
MIDTERM PERIOD
GUI Implementation Tools
There are several tools available using which the designers can create
entire GUI on a mouse click. Some tools can be embedded into the software
environment (IDE).
GUI implementation tools provide powerful array of GUI controls. For

software customization, designers can change the code accordingly.
There are different segments of GUI tools according to their different use
and platform.
Example
Mobile GUI, Computer GUI, Touch-Screen GUI etc. Here is a list of few tools
which come handy to build GUI:
FLUID
AppInventor (Android)
LucidChart
Wavemaker
Visual Studio
User Interface Golden rules

The following rules are mentioned to be the golden rules for GUI design,
described by Shneiderman and Plaisant in their book (Designing the User
Interface).
Strive for consistency - Consistent sequences of actions should be required in

similar situations. Identical terminology should be used in prompts, menus, and
help screens. Consistent commands should be employed throughout.
Enable frequent users to use short-cuts - The users desire to reduce the
number of interactions increases with the frequency of use. Abbreviations,
function keys, hidden commands, and macro facilities are very helpful to an
expert user.
Offer informative feedback - For every operator action, there should be some
system feedback. For frequent and minor actions, the response must be
modest, while for infrequent and major actions, the response must be more
substantial.
Design dialog to yield closure - Sequences of actions should be organized

into groups with a beginning, middle, and end. The informative feedback at the
completion of a group of actions gives the operators the satisfaction of
accomplishment, a sense of relief, the signal to drop contingency plans and
options from their minds, and this indicates that the way ahead is clear to
prepare for the next group of actions.
Offer simple error handling - As much as possible, design the system so the
user will not make a serious error. If an error is made, the system should be
able to detect it and offer simple, comprehensible mechanisms for handling the
error.
Permit easy reversal of actions - This feature relieves anxiety, since the user
knows that errors can be undone. Easy reversal of actions encourages
exploration of unfamiliar options. The units of reversibility may be a single
action, a data entry, or a complete group of actions.
Support internal locus of control - Experienced operators strongly desire the

sense that they are in charge of the system and that the system responds to
their actions. Design the system to make users the initiators of actions rather
than the responders.
Reduce short-term memory load - The limitation of human information

processing in short-term memory requires the displays to be kept simple,
multiple page displays be consolidated, window-motion frequency be reduced,
and sufficient training time be allotted for codes, mnemonics, and sequences of
actions.
The term complexity stands for state of events or things, which have
multiple interconnected links and highly complicated structures. In software
programming, as the design of software is realized, the number of elements
and their interconnections gradually emerge to be huge, which becomes too
difficult to understand at once.
Software design complexity is difficult to assess without using complexity

metrics and measures. Let us see three important software complexity
measures.
Halstead's Complexity Measures

In 1977, Mr. Maurice Howard Halstead introduced metrics to measure
software complexity. Halsteads metrics depends upon the actual
implementation of program and its measures, which are computed directly
from the operators and operands from source code, in static manner. It
allows to evaluate testing time, vocabulary, size, difficulty, errors, and
efforts for C/C++/Java source code.
According to Halstead, A computer program is an implementation of an

algorithm considered to be a collection of tokens which can be classified as
either operators or operands. Halstead metrics think a program as
sequence of operators and their associated operands.
He defines various indicators to check complexity of module.
Parameter Meaning
n1 Number of unique operators
n2 Number of unique operands
N1 Number of total occurrence of operators
N2 Number of total occurrence of operands
When we select source file to view its complexity details in Metric Viewer,
the following result is seen in Metric Report:
Metric Meaning Mathematical Representation
n Vocabulary n1 + n2
N Size N1 + N2
V Volume Length * Log2 Vocabulary
D Difficulty (n1/2) * (N1/n2)
E Efforts Difficulty * Volume
B Errors Volume / 3000
T Testing time Time = Efforts / S, where S=18 seconds.
Cyclomatic Complexity Measures

Every program encompasses statements to execute in order to perform
some task and other decision-making statements that decide, what
statements need to be executed. These decision-making constructs change
the flow of the program.
If we compare two programs of same size, the one with more decision-
making statements will be more complex as the control of program jumps
frequently.
McCabe, in 1976, proposed Cyclomatic Complexity Measure to quantify

complexity of a given software. It is graph driven model that is based on
decision-making constructs of program such as if-else, do-while, repeat-
until, switch-case and goto statements.
Process to make flow control graph:
Break program in smaller blocks, delimited by decision-making constructs.
Create nodes representing each of these nodes.
Connect nodes as follows:
o If control can branch from block i to block j

Draw an arc
o From exit node to entry node
Draw an arc.
To calculate Cyclomatic complexity of a program module, we use the

formula -
V(G) = e n + 2
Where
e is total number of edges
n is total number of nodes
The Cyclomatic complexity of the above module is
e = 10
n = 8
Cyclomatic Complexity = 10 - 8 + 2
= 4
According to P. Jorgensen, Cyclomatic Complexity of a module should not

exceed 10.
Function Point
It is widely used to measure the size of software. Function Point
concentrates on functionality provided by the system. Features and
functionality of the system are used to measure the software complexity.
Function point counts on five parameters, named as External Input,

External Output, Logical Internal Files, External Interface Files, and External
Inquiry. To consider the complexity of software each parameter is further
categorized as simple, average or complex.
Let us see parameters of function point:
External Input
Every unique input to the system, from outside, is considered as external
input. Uniqueness of input is measured, as no two inputs should have same
formats. These inputs can either be data or control parameters.
Simple - if input count is low and affects less internal files
Complex - if input count is high and affects more internal files
Average - in-between simple and complex.
External Output
All output types provided by the system are counted in this category.
Output is considered unique if their output format and/or processing are
unique.
Simple - if output count is low
Complex - if output count is high
Average - in between simple and complex.
Logical Internal Files

Every software system maintains internal files in order to maintain its
functional information and to function properly. These files hold logical data
of the system. This logical data may contain both functional data and
control data.
Simple - if number of record types are low
Complex - if number of record types are high
External Interface Files

Software system may need to share its files with some external software or
it may need to pass the file for processing or as parameter to some
function. All these files are counted as external interface files.
Simple - if number of record types in shared file are low
Complex - if number of record types in shared file are high
External Inquiry
An inquiry is a combination of input and output, where user sends some
data to inquire about as input and the system responds to the user with the
output of inquiry processed. The complexity of a query is more than
External Input and External Output. Query is said to be unique if its input
and output are unique in terms of format and data.
Simple - if query needs low processing and yields small amount of output data
Complex - if query needs high process and yields large amount of output data
Each of these parameters in the system is given weightage according to

their class and complexity. The table below mentions the weightage given
to each parameter:
Parameter Simple Average Complex
Inputs 3 4 6
Outputs 4 5 7
Enquiry 3 4 6
Files 7 10 15
Interfaces 5 7 10
The table above yields raw Function Points. These function points are
adjusted according to the environment complexity. System is described
using fourteen different characteristics:
Data communications
Distributed processing
Performance objectives
Operation configuration load
Transaction rate
Online data entry,
End user efficiency
Online update
Complex processing logic
Re-usability
Installation ease
Operational ease
Multiple sites
Desire to facilitate changes
These characteristics factors are then rated from 0 to 5, as mentioned

below:
No influence
Incidental
Moderate
Average
Significant
Essential
All ratings are then summed up as N. The value of N ranges from 0 to 70

(14 types of characteristics x 5 types of ratings). It is used to calculate
Complexity Adjustment Factors (CAF), using the following formulae:
CAF = 0.65 + 0.01N
Then,
Delivered Function Points (FP)= CAF x Raw FP
This FP can then be used in various metrics, such as:
Cost = $ / FP
Quality = Errors / FP
Productivity = FP / person-month
Structured Programming
In the process of coding, the lines of code keep multiplying, thus, size of
the software increases. Gradually, it becomes next to impossible to
remember the flow of program. If one forgets how software and its
underlying programs, files, procedures are constructed it then becomes
very difficult to share, debug and modify the program. The solution to this
is structured programming. It encourages the developer to use subroutines
and loops instead of using simple jumps in the code, thereby bringing
clarity in the code and improving its efficiency Structured programming also
helps programmer to reduce coding time and organize code properly.
Structured programming states how the program shall be coded. Structured

programming uses three main concepts:
Top-down analysis - A software is always made to perform some rational

work. This rational work is known as problem in the software parlance. Thus it
is very important that we understand how to solve the problem. Under top-
down analysis, the problem is broken down into small pieces where each one
has some significance. Each problem is individually solved and steps are clearly
stated about how to solve the problem.
Modular Programming - While programming, the code is broken down into

smaller group of instructions. These groups are known as modules,
subprograms or subroutines. Modular programming based on the understanding
of top-down analysis. It discourages jumps using goto statements in the
program, which often makes the program flow non-traceable. Jumps are
prohibited and modular format is encouraged in structured programming.
Structured Coding - In reference with top-down analysis, structured coding

sub-divides the modules into further smaller units of code in the order of their
execution. Structured programming uses control structure, which controls the
flow of the program, whereas structured coding uses control structure to
organize its instructions in definable patterns.
Functional Programming
Functional programming is style of programming language, which uses the
concepts of mathematical functions. A function in mathematics should
always produce the same result on receiving the same argument. In
procedural languages, the flow of the program runs through procedures, i.e.
the control of program is transferred to the called procedure. While control
flow is transferring from one procedure to another, the program changes its
state.
In procedural programming, it is possible for a procedure to produce
different results when it is called with the same argument, as the program
itself can be in different state while calling it. This is a property as well as a
drawback of procedural programming, in which the sequence or timing of
the procedure execution becomes important.
Functional programming provides means of computation as mathematical

functions, which produces results irrespective of program state. This makes
it possible to predict the behavior of the program.
Functional programming uses the following concepts:
First class and High-order functions - These functions have capability to

accept another function as argument or they return other functions as results.
Pure functions - These functions do not include destructive updates, that is,
they do not affect any I/O or memory and if they are not in use, they can easily
be removed without hampering the rest of the program.
Recursion - Recursion is a programming technique where a function calls itself

and repeats the program code in it unless some pre-defined condition matches.
Recursion is the way of creating loops in functional programming.
Strict evaluation - It is a method of evaluating the expression passed to a

function as an argument. Functional programming has two types of evaluation
methods, strict (eager) or non-strict (lazy). Strict evaluation always evaluates
the expression before invoking the function. Non-strict evaluation does not
evaluate the expression unless it is needed.
-calculus - Most functional programming languages use -calculus as their

type systems. -expressions are executed by evaluating them as they occur.
Common Lisp, Scala, Haskell, Erlang and F# are some examples of

functional programming languages.
Programming style
Programming style is set of coding rules followed by all the programmers to
write the code. When multiple programmers work on the same software
project, they frequently need to work with the program code written by
some other developer. This becomes tedious or at times impossible, if all
developers do not follow some standard programming style to code the
program.
An appropriate programming style includes using function and variable

names relevant to the intended task, using well-placed indentation,
commenting code for the convenience of reader and overall presentation of
code. This makes the program code readable and understandable by all,
which in turn makes debugging and error solving easier. Also, proper coding
style helps ease the documentation and updation.
Coding Guidelines
Practice of coding style varies with organizations, operating systems and
language of coding itself.
The following coding elements may be defined under coding guidelines of an

organization:
Naming conventions - This section defines how to name functions, variables,

constants and global variables.
Indenting - This is the space left at the beginning of line, usually 2-8
whitespace or single tab.
Whitespace - It is generally omitted at the end of line.
Operators - Defines the rules of writing mathematical, assignment and logical

operators. For example, assignment operator = should have space before and
after it, as in x = 2.
Control Structures - The rules of writing if-then-else, case-switch, while-until

and for control flow statements solely and in nested fashion.
Line length and wrapping - Defines how many characters should be there in
one line, mostly a line is 80 characters long. Wrapping defines how a line should
be wrapped, if is too long.
Functions - This defines how functions should be declared and invoked, with
and without parameters.
Variables - This mentions how variables of different data types are declared
and defined.
Comments - This is one of the important coding components, as the comments

included in the code describe what the code actually does and all other
associated descriptions. This section also helps creating help documentations for
other developers.
Software Documentation
Software documentation is an important part of software process. A well
written document provides a great tool and means of information repository
necessary to know about software process. Software documentation also
provides information about how to use the product.
A well-maintained documentation should involve the following documents:
Requirement documentation - This documentation works as key tool for

software designer, developer and the test team to carry out their respective
tasks. This document contains all the functional, non-functional and behavioral
description of the intended software.
Source of this document can be previously stored data about the software,
already running software at the clients end, clients interview, questionnaires
and research. Generally it is stored in the form of spreadsheet or word
processing document with the high-end software management team.
This documentation works as foundation for the software to be developed and is

majorly used in verification and validation phases. Most test-cases are built
directly from requirement documentation.
Software Design documentation - These documentations contain all the

necessary information, which are needed to build the software. It
contains: (a) High-level software architecture, (b) Software design
details, (c) Data flow diagrams, (d) Database design
These documents work as repository for developers to implement the software.
Though these documents do not give any details on how to code the program,
they give all necessary information that is required for coding and
implementation.
Technical documentation - These documentations are maintained by the

developers and actual coders. These documents, as a whole, represent
information about the code. While writing the code, the programmers also
mention objective of the code, who wrote it, where will it be required, what it
does and how it does, what other resources the code uses, etc.
The technical documentation increases the understanding between various

programmers working on the same code. It enhances re-use capability of the
code. It makes debugging easy and traceable.
There are various automated tools available and some comes with the
programming language itself. For example java comes JavaDoc tool to generate
technical documentation of code.
User documentation - This documentation is different from all the above

explained. All previous documentations are maintained to provide information
about the software and its development process. But user documentation
explains how the software product should work and how it should be used to get
the desired results.
These documentations may include, software installation procedures, how-to

guides, user-guides, uninstallation method and special references to get more
information like license updation etc.
Software Implementation Challenges

There are some challenges faced by the development team while
implementing the software. Some of them are mentioned below:
Code-reuse - Programming interfaces of present-day languages are very

sophisticated and are equipped huge library functions. Still, to bring the cost
down of end product, the organization management prefers to re-use the code,
which was created earlier for some other software. There are huge issues faced
by programmers for compatibility checks and deciding how much code to re-
use.
Version Management - Every time a new software is issued to the customer,

developers have to maintain version and configuration related documentation.
This documentation needs to be highly accurate and available on time.
Target-Host - The software program, which is being developed in the

organization, needs to be designed for host machines at the customers end. But
at times, it is impossible to design a software that works on the target
machines.
Software Testing is evaluation of the software against requirements

gathered from users and system specifications. Testing is conducted at the
phase level in software development life cycle or at module level in program
code. Software testing comprises of Validation and Verification.
Software Validation
Validation is process of examining whether or not the software satisfies the
user requirements. It is carried out at the end of the SDLC. If the software
matches requirements for which it was made, it is validated.
Validation ensures the product under development is as per the user

requirements.
Validation answers the question "Are we developing the product which

attempts all that user needs from this software ?".
Validation emphasizes on user requirements.
Software Verification
Verification is the process of confirming if the software is meeting the
business requirements, and is developed adhering to the proper
specifications and methodologies.
Verification ensures the product being developed is according to design

specifications.
Verification answers the question "Are we developing this product by firmly
following all design specifications ?"
Verifications concentrates on the design and system specifications.
Target of the test are -
Errors - These are actual coding mistakes made by developers. In addition,

there is a difference in output of software and desired output, is considered as
an error.
Fault - When error exists fault occurs. A fault, also known as a bug, is a result
of an error which can cause system to fail.
Failure - failure is said to be the inability of the system to perform the desired
task. Failure occurs when fault exists in the system.
Manual Vs Automated Testing

Testing can either be done manually or using an automated testing tool:
Manual - This testing is performed without taking help of automated testing

tools. The software tester prepares test cases for different sections and levels of
the code, executes the tests and reports the result to the manager.
Manual testing is time and resource consuming. The tester needs to confirm
whether or not right test cases are used. Major portion of testing involves
manual testing.
Automated This testing is a testing procedure done with aid of automated

testing tools. The limitations with manual testing can be overcome using
automated test tools.
A test needs to check if a webpage can be opened in Internet Explorer. This

can be easily done with manual testing. But to check if the web-server can
take the load of 1 million users, it is quite impossible to test manually.
There are software and hardware tools which helps tester in conducting load
testing, stress testing, regression testing.
Testing Approaches
Tests can be conducted based on two approaches
Functionality testing
Implementation testing
When functionality is being tested without taking the actual implementation

in concern it is known as black-box testing. The other side is known as
white-box testing where not only functionality is tested but the way it is
implemented is also analyzed.
Exhaustive tests are the best-desired method for a perfect testing. Every
single possible value in the range of the input and output values is tested. It
is not possible to test each and every value in real world scenario if the
range of values is large.
Black-box testing
It is carried out to test functionality of the program. It is also called
Behavioral testing. The tester in this case, has a set of input values and
respective desired results. On providing input, if the output matches with
the desired results, the program is tested ok, and problematic otherwise.
In this testing method, the design and structure of the code are not known
to the tester, and testing engineers and end users conduct this test on the
software.
Black-box testing techniques:
Equivalence class - The input is divided into similar classes. If one element of
a class passes the test, it is assumed that all the class is passed.
Boundary values - The input is divided into higher and lower end values. If
these values pass the test, it is assumed that all values in between may pass
too.
Cause-effect graphing - In both previous methods, only one input value at a

time is tested. Cause (input) Effect (output) is a testing technique where
combinations of input values are tested in a systematic way.
Pair-wise Testing - The behavior of software depends on multiple parameters.

In pairwise testing, the multiple parameters are tested pair-wise for their
different values.
State-based testing - The system changes state on provision of input. These

systems are tested based on their states and input.
White-box testing
It is conducted to test program and its implementation, in order to improve
code efficiency or structure. It is also known as Structural testing.
In this testing method, the design and structure of the code are known to
the tester. Programmers of the code conduct this test on the code.
The below are some White-box testing techniques:
Control-flow testing - The purpose of the control-flow testing to set up test

cases which covers all statements and branch conditions. The branch conditions
are tested for both being true and false, so that all statements can be covered.
Data-flow testing - This testing technique emphasis to cover all the data
variables included in the program. It tests where the variables were declared
and defined and where they were used or changed.
Testing Levels
Testing itself may be defined at various levels of SDLC. The testing process
runs parallel to software development. Before jumping on the next stage, a
stage is tested, validated and verified.
Testing separately is done just to make sure that there are no hidden bugs
or issues left in the software. Software is tested on various levels -
Unit Testing
While coding, the programmer performs some tests on that unit of program
to know if it is error free. Testing is performed under white-box testing
approach. Unit testing helps developers decide that individual units of the
program are working as per requirement and are error free.
Integration Testing
Even if the units of software are working fine individually, there is a need to
find out if the units if integrated together would also work without errors.
For example, argument passing and data updation etc.
System Testing
The software is compiled as product and then it is tested as a whole. This
can be accomplished using one or more of the following tests:
Functionality testing - Tests all functionalities of the software against the

requirement.
Performance testing - This test proves how efficient the software is. It tests
the effectiveness and average time taken by the software to do desired task.
Performance testing is done by means of load testing and stress testing where
the software is put under high user and data load under various environment
conditions.
Security & Portability - These tests are done when the software is meant to
work on various platforms and accessed by number of persons.
Acceptance Testing
When the software is ready to hand over to the customer it has to go
through last phase of testing where it is tested for user-interaction and
response. This is important because even if the software matches all user
requirements and if user does not like the way it appears or works, it may
be rejected.
Alpha testing - The team of developer themselves perform alpha testing by

using the system as if it is being used in work environment. They try to find out
how user would react to some action in software and how the system should
respond to inputs.
Beta testing - After the software is tested internally, it is handed over to the
users to use it under their production environment only for testing purpose. This
is not as yet the delivered product. Developers expect that users at this stage
will bring minute problems, which were skipped to attend.
Regression Testing
Whenever a software product is updated with new code, feature or
functionality, it is tested thoroughly to detect if there is any negative impact
of the added code. This is known as regression testing.
Testing Documentation
Testing documents are prepared at different stages -
Before Testing
Testing starts with test cases generation. Following documents are needed
for reference
SRS document - Functional Requirements document
Test Policy document - This describes how far testing should take place before
releasing the product.
Test Strategy document - This mentions detail aspects of test team,

responsibility matrix and rights/responsibility of test manager and test
engineer.
Traceability Matrix document - This is SDLC document, which is related to
requirement gathering process. As new requirements come, they are added to
this matrix. These matrices help testers know the source of requirement. They
can be traced forward and backward.
While Being Tested

The following documents may be required while testing is started and is
being done:
Test Case document - This document contains list of tests required to be

conducted. It includes Unit test plan, Integration test plan, System test plan
and Acceptance test plan.
Test description - This document is a detailed description of all test cases and
procedures to execute them.
Test case report - This document contains test case report as a result of the
test.
Test logs - This document contains test logs for every test case report.
After Testing
The following documents may be generated after testing :
Test summary - This test summary is collective analysis of all test reports and
logs. It summarizes and concludes if the software is ready to be launched. The
software is released under version control system if it is ready to launch.
Testing vs. Quality Control, Quality Assurance

and Audit
We need to understand that software testing is different from software
quality assurance, software quality control and software auditing.
Software quality assurance - These are software development process

monitoring means, by which it is assured that all the measures are taken as per
the standards of organization. This monitoring is done to make sure that proper
software development methods were followed.
Software quality control - This is a system to maintain the quality of software
product. It may include functional and non-functional aspects of software
product, which enhance the goodwill of the organization. This system makes
sure that the customer is receiving quality product for their requirement and the
product certified as fit for use.
Software audit - This is a review of procedure used by the organization to

develop the software. A team of auditors, independent of development team
examines the software process, procedure, requirements and other aspects of
SDLC. The purpose of software audit is to check that software and its
development process, both conform standards, rules and regulations.
Software maintenance is widely accepted part of SDLC now a days. It

stands for all the modifications and updations done after the delivery of
software product. There are number of reasons, why modifications are
required, some of them are briefly mentioned below:
Market Conditions - Policies, which changes over the time, such as taxation
and newly introduced constraints like, how to maintain bookkeeping, may
trigger need for modification.
Client Requirements - Over the time, customer may ask for new features or
functions in the software.
Host Modifications - If any of the hardware and/or platform (such as operating

system) of the target host changes, software changes are needed to keep
adaptability.
Organization Changes - If there is any business level change at client end,

such as reduction of organization strength, acquiring another company,
organization venturing into new business, need to modify in the original
software may arise.
Types of maintenance
In a software lifetime, type of maintenance may vary based on its nature. It
may be just a routine maintenance tasks as some bug discovered by some
user or it may be a large event in itself based on maintenance size or
nature. Following are some types of maintenance based on their
characteristics:
Corrective Maintenance - This includes modifications and updations done in

order to correct or fix problems, which are either discovered by user or
concluded by user error reports.
Adaptive Maintenance - This includes modifications and updations applied to

keep the software product up-to date and tuned to the ever changing world of
technology and business environment.
Perfective Maintenance - This includes modifications and updates done in

order to keep the software usable over long period of time. It includes new
features, new user requirements for refining the software and improve its
reliability and performance.
Preventive Maintenance - This includes modifications and updations to

prevent future problems of the software. It aims to attend problems, which are
not significant at this moment but may cause serious issues in future.
Cost of Maintenance
Reports suggest that the cost of maintenance is high. A study on estimating
software maintenance found that the cost of maintenance is as high as 67%
of the cost of entire software process cycle.
On an average, the cost of software maintenance is more than 50% of all
SDLC phases. There are various factors, which trigger maintenance cost go
high, such as:
Real-world factors affecting Maintenance Cost
The standard age of any software is considered up to 10 to 15 years.
Older softwares, which were meant to work on slow machines with less memory
and storage capacity cannot keep themselves challenging against newly coming
enhanced softwares on modern hardware.
As technology advances, it becomes costly to maintain old software.
Most maintenance engineers are newbie and use trial and error method to rectify
problem.
Often, changes made can easily hurt the original structure of the software,
making it hard for any subsequent changes.
Changes are often left undocumented which may cause more conflicts in future.
Software-end factors affecting Maintenance Cost
Structure of Software Program
Programming Language
Dependence on external environment
Staff reliability and availability
Maintenance Activities
IEEE provides a framework for sequential maintenance process activities. It
can be used in iterative manner and can be extended so that customized
items and processes can be included.
These activities go hand-in-hand with each of the following phase:
Identification & Tracing - It involves activities pertaining to identification of

requirement of modification or maintenance. It is generated by user or system
may itself report via logs or error messages.Here, the maintenance type is
classified also.
Analysis - The modification is analyzed for its impact on the system including
safety and security implications. If probable impact is severe, alternative
solution is looked for. A set of required modifications is then materialized into
requirement specifications. The cost of modification/maintenance is analyzed
and estimation is concluded.
Design - New modules, which need to be replaced or modified, are designed
against requirement specifications set in the previous stage. Test cases are
created for validation and verification.
Implementation - The new modules are coded with the help of structured
design created in the design step.Every programmer is expected to do unit
testing in parallel.
System Testing - Integration testing is done among newly created modules.

Integration testing is also carried out between new modules and the system.
Finally the system is tested as a whole, following regressive testing procedures.
Acceptance Testing - After testing the system internally, it is tested for

acceptance with the help of users. If at this state, user complaints some issues
they are addressed or noted to address in next iteration.
Delivery - After acceptance test, the system is deployed all over the
organization either by small update package or fresh installation of the system.
The final testing takes place at client end after the software is delivered.
Training facility is provided if required, in addition to the hard copy of user

manual.
Maintenance management - Configuration management is an essential part

of system maintenance. It is aided with version control tools to control versions,
semi-version or patch management.
Software Re-engineering
When we need to update the software to keep it to the current market,
without impacting its functionality, it is called software re-engineering. It is
a thorough process where the design of software is changed and programs
are re-written.
Legacy software cannot keep tuning with the latest technology available in
the market. As the hardware become obsolete, updating of software
becomes a headache. Even if software grows old with time, its functionality
does not.
For example, initially Unix was developed in assembly language. When
language C came into existence, Unix was re-engineered in C, because
working in assembly language was difficult.
Other than this, sometimes programmers notice that few parts of software
need more maintenance than others and they also need re-engineering.
Re-Engineering Process
Decide what to re-engineer. Is it whole software or a part of it?
Perform Reverse Engineering, in order to obtain specifications of existing

software.
Restructure Program if required. For example, changing function-oriented

programs into object-oriented programs.
Re-structure data as required.
Apply Forward engineering concepts in order to get re-engineered software.
There are few important terms used in Software re-engineering
Reverse Engineering
It is a process to achieve system specification by thoroughly analyzing,
understanding the existing system. This process can be seen as reverse
SDLC model, i.e. we try to get higher abstraction level by analyzing lower
abstraction levels.
An existing system is previously implemented design, about which we know

nothing. Designers then do reverse engineering by looking at the code and
try to get the design. With design in hand, they try to conclude the
specifications. Thus, going in reverse from code to system specification.
Program Restructuring
It is a process to re-structure and re-construct the existing software. It is all
about re-arranging the source code, either in same programming language
or from one programming language to a different one. Restructuring can
have either source code-restructuring and data-restructuring or both.
Re-structuring does not impact the functionality of the software but

enhance reliability and maintainability. Program components, which cause
errors very frequently can be changed, or updated with re-structuring.
The dependability of software on obsolete hardware platform can be

removed via re-structuring.
Forward Engineering
Forward engineering is a process of obtaining desired software from the
specifications in hand which were brought down by means of reverse
engineering. It assumes that there was some software engineering already
done in the past.
Forward engineering is same as software engineering process with only one

difference it is carried out always after reverse engineering.
Component reusability
A component is a part of software program code, which executes an
independent task in the system. It can be a small module or sub-system
itself.
Example
The login procedures used on the web can be considered as components,
printing system in software can be seen as a component of the software.
Components have high cohesion of functionality and lower rate of coupling,

i.e. they work independently and can perform tasks without depending on
other modules.
In OOP, the objects are designed are very specific to their concern and have
fewer chances to be used in some other software.
In modular programming, the modules are coded to perform specific tasks

which can be used across number of other software programs.
There is a whole new vertical, which is based on re-use of software

component, and is known as Component Based Software Engineering
(CBSE).
Re-use can be done at various levels
Application level - Where an entire application is used as sub-system of new

software.
Component level - Where sub-system of an application is used.
Modules level - Where functional modules are re-used.
Software components provide interfaces, which can be used to establish

communication among different components.
Reuse Process
Two kinds of method can be adopted: either by keeping requirements same
and adjusting components or by keeping components same and modifying
requirements.
Requirement Specification - The functional and non-functional requirements

are specified, which a software product must comply to, with the help of
existing system, user input or both.
Design - This is also a standard SDLC process step, where requirements are
defined in terms of software parlance. Basic architecture of system as a whole
and its sub-systems are created.
Specify Components - By studying the software design, the designers

segregate the entire system into smaller components or sub-systems. One
complete software design turns into a collection of a huge set of components
working together.
Search Suitable Components - The software component repository is referred

by designers to search for the matching component, on the basis of
functionality and intended software requirements..
Incorporate Components - All matched components are packed together to

shape them as complete software.
CASE stands for Computer Aided Software Engineering. It means,

development and maintenance of software projects with help of various
automated software tools.
CASE Tools
CASE tools are set of software application programs, which are used to
automate SDLC activities. CASE tools are used by software project
managers, analysts and engineers to develop software system.
There are number of CASE tools available to simplify various stages of

Software Development Life Cycle such as Analysis tools, Design tools,
Project management tools, Database Management tools, Documentation
tools are to name a few.
Use of CASE tools accelerates the development of project to produce

desired result and helps to uncover flaws before moving ahead with next
stage in software development.
Components of CASE Tools

CASE tools can be broadly divided into the following parts based on their
use at a particular SDLC stage:
Central Repository - CASE tools require a central repository, which can serve
as a source of common, integrated and consistent information. Central
repository is a central place of storage where product specifications,
requirement documents, related reports and diagrams, other useful information
regarding management is stored. Central repository also serves as data
dictionary.
Upper Case Tools - Upper CASE tools are used in planning, analysis and design
stages of SDLC.
Lower Case Tools - Lower CASE tools are used in implementation, testing and
maintenance.
Integrated Case Tools - Integrated CASE tools are helpful in all the stages of
SDLC, from Requirement gathering to Testing and documentation.
CASE tools can be grouped together if they have similar functionality,

process activities and capability of getting integrated with other tools.
Scope of Case Tools

The scope of CASE tools goes throughout the SDLC.
Case Tools Types

Now we briefly go through various CASE tools
Diagram tools
These tools are used to represent system components, data and control
flow among various software components and system structure in a
graphical form. For example, Flow Chart Maker tool for creating state-of-
the-art flowcharts.
Process Modeling Tools

Process modeling is method to create software process model, which is
used to develop the software. Process modeling tools help the managers to
choose a process model or modify it as per the requirement of software
product. For example, EPF Composer
Project Management Tools

These tools are used for project planning, cost and effort estimation, project
scheduling and resource planning. Managers have to strictly comply project
execution with every mentioned step in software project management.
Project management tools help in storing and sharing project information in
real-time throughout the organization. For example, Creative Pro Office,
Trac Project, Basecamp.
Documentation Tools
Documentation in a software project starts prior to the software process,
goes throughout all phases of SDLC and after the completion of the project.
Documentation tools generate documents for technical users and end users.
Technical users are mostly in-house professionals of the development team
who refer to system manual, reference manual, training manual, installation
manuals etc. The end user documents describe the functioning and how-to
of the system such as user manual. For example, Doxygen, DrExplain,
Adobe RoboHelp for documentation.
Analysis Tools
These tools help to gather requirements, automatically check for any
inconsistency, inaccuracy in the diagrams, data redundancies or erroneous
omissions. For example, Accept 360, Accompa, CaseComplete for
requirement analysis, Visible Analyst for total analysis.
Design Tools
These tools help software designers to design the block structure of the
software, which may further be broken down in smaller modules using
refinement techniques. These tools provides detailing of each module and
interconnections among modules. For example, Animated Software Design
Configuration Management Tools

An instance of software is released under one version. Configuration
Management tools deal with
Version and revision management
Baseline configuration management
Change control management
CASE tools help in this by automatic tracking, version management and

release management. For example, Fossil, Git, Accu REV.
Change Control Tools

These tools are considered as a part of configuration management tools.
They deal with changes made to the software after its baseline is fixed or
when the software is first released. CASE tools automate change tracking,
file management, code management and more. It also helps in enforcing
change policy of the organization.
Programming Tools
These tools consist of programming environments like IDE (Integrated
Development Environment), in-built modules library and simulation tools.
These tools provide comprehensive aid in building software product and
include features for simulation and testing. For example, Cscope to search
code in C, Eclipse.
Prototyping Tools
Software prototype is simulated version of the intended software product.
Prototype provides initial look and feel of the product and simulates few
aspect of actual product.
Prototyping CASE tools essentially come with graphical libraries. They can
create hardware independent user interfaces and design. These tools help
us to build rapid prototypes based on existing information. In addition, they
provide simulation of software prototype. For example, Serena prototype
composer, Mockup Builder.
Web Development Tools

These tools assist in designing web pages with all allied elements like forms,
text, script, graphic and so on. Web tools also provide live preview of what
is being developed and how will it look after completion. For example,
Fontello, Adobe Edge Inspect, Foundation 3, Brackets.
Quality Assurance Tools

Quality assurance in a software organization is monitoring the engineering
process and methods adopted to develop the software product in order to
ensure conformance of quality as per organization standards. QA tools
consist of configuration and change control tools and software testing tools.
For example, SoapTest, AppsWatch, JMeter.
Maintenance Tools
Software maintenance includes modifications in the software product after it
is delivered. Automatic logging and error reporting techniques, automatic
error ticket generation and root cause Analysis are few CASE tools, which
help software organization in maintenance phase of SDLC. For example,
Bugzilla for defect tracking, HP Quality Center.
SOFTWARE ENGINEERING
MODULE
Prepared by:
Mrs. Rozaida C. Tuazon

Definitions: Software Is More Than Just A Program Code. A Program Is An Executable

Uploaded by

Document Informationclick to expand document information

Copyright:

Available Formats

Definitions: Software Is More Than Just A Program Code. A Program Is An Executable

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Definitions: Software Is More Than Just A Program Code. A Program Is An Executable

Uploaded by

Copyright:

Available Formats

Software is more than just a program code.

Engineering on the other hand, is all about developing products, using

Software engineering is an engineering branch associated with

(1) The application of a systematic,disciplined,quantifiable approach to the

Fritz Bauer, a German computer scientist, defines software engineering as:

Software engineering is the establishment and use of sound engineering

Evolution starts from the requirement gathering process. After which

S-type (static-type) - This is a software, which works strictly according to

P-type (practical-type) - This is a software with a collection of procedures.

E-type (embedded-type) - This software works closely as the requirement of

E-Type software evolution

Continuing change - An E-type software system must continue to adapt to the

Increasing complexity - As an E-type software system evolves, its complexity

Conservation of familiarity - The familiarity with the software or the

Continuing growth- In order for an E-type system intended to resolve some

Reducing quality - An E-type software system declines in quality unless

Self-regulation - E-type system evolution processes are self-regulating with the

Organizational stability - The average effective global activity rate in an

Programming paradigm is a subset of Software design paradigm which is

Software Development Paradigm

Software Design Paradigm

Need of Software Engineering

Large software - It is easier to build a wall than to a house or building,

Quality Management- Better process of software development provides better

Characteristics of good software

Well-engineered and crafted software is expected to have the following

In short, Software engineering is a branch of computer science, which uses

studying the existing or obsolete system and software,

Operation and Maintenance

Software Development Paradigm

Big Bang Model

The job pattern of an IT company engaged in software development can be

Software Project Management

A project is well-defined task, which is a collection of several operations

Every project may has a unique and distinct goal.

Project is not routine activity or day-to-day operations.

Project comes with a start time and end time.

Project needs adequate resources in terms of time, manpower, finance, material

Need of software project management

The image above shows triple constraints for software projects. It is an

Therefore, software project management is essential to incorporate user

Software Project Manager

A project manager closely monitors the development process, prepares and

Let us see few responsibilities that a project manager shoulders -

Act as project leader

Liaison with stakeholders

Managing human resources

Setting up reporting hierarchy etc.

Defining and setting up project scope

Managing project management activities

Monitoring progress and performance

Risk analysis at every phase

Take necessary step to avoid or come out of problems

Act as project spokesperson

Software Management Activities

During Project Scope management, it is necessary to -

Define the scope

Decide its verification and control