ISSN (Online) 2278-1021

IJARCCE ISSN (Print) 2319 5940

International Journal of Advanced Research in Computer and Communication Engineering

ISO 3297:2007 Certified
Vol. 5, Issue 10, October 2016

Raspberry Pi Based Weather Monitoring System

Meetali V. Rasal1, Prof. Jaideep G. Rana2
PG Student, Department of E&TC, Jawaharlal Nehru Engineering College, Aurangabad, India1
HOD, Department of E&TC, Jawaharlal Nehru Engineering College, Aurangabad, India2

Abstract: Implementing a prototype model for the weather monitoring system is the main aim of the paper
Temperature, relative humidity and atmospheric pressure measurement by using the appropriate sensors is very
beneficial for industrial, weather monitoring. A weather monitoring model or system has been developed as discussed
in this paper to record and displaying of the weather parameters like temperature, humidity, wind direction speed, rain
fall detection and atmospheric pressure Various weather monitoring techniques have been reviewed in this paper.
Recorded information is kept in the device for further use. User can find out the data saved by the system anytime as
per the request. Among Various techniques radars, satellites, microcontrollers of weather monitoring systems raspberry
pi is the latest& efficient wireless weather monitoring technique.

Keywords: Raspberry Pi. Cloud Server, Weather monitoring sensors, Python programming

I INTRODUCTION II.PROPOSED SYSTEM

Weather or Climate is important part of human life. Raspberry pi is the latest wireless technology .Proposed
Sensors are essential components not only applicable to System will visualize and store various weather
the industries for process control but also in daily life for parameters as given above with the help of sensors
safety of buildings and traffic flow measuring, interfaced to Raspberry will get all data, SD card on Pi
environmental parameters measurement. stores the collected data as like memory card. Then at the
output side LCD is to be connected for showing the result
In weather monitoring, factors such as temperature, and on off relays for server access .To know the current
humidity and pressure are to be measured for this project, weather status at remote location, the user can to log in on
thus sensors have always been given the task for doing so. web browser by entering username and password given for
Main focus of project is to develop compact and powerful particular server by the user. Web application opens after
weather station .Data acquisition systems are very popular entering password and with the output graphical
for consumer and industrial applications. The proposed representation also obtain. Raspberry pi processed data
system has three sensors that measures different will updated continuously on cloud server & user will get
parameters as stated above & for rain fall detection and to know the stored data on hourly and daily basis.
wind direction speed measurement weather instrument is
included. The System Circuit Block Diagram
Raspberry Pi, acting as data logger process the converted Power
Supply
output of sensors from analog to digital. The logged data
can then be transferred to a desktop or any other monitor
has GUI for further analysis. So by using easily obtained Temperature
components and less complicated circuitry powerful Sensor LCD Display
weather station can be build Now a days various weather
Humidity
factors like wind and many other cause great impact on Sensor Relay Driver
humans day to day life. Raspberry ULN2803
Pressure Pi
In raspberry pi based weather monitoring system which Sensor
depends on combination of several sensors to be integrated Relay Relay Relay Relay
has been proposed. Raspberry Pi will receive readings Weather
Meter
from various sensors and then process the data and then
data will be available on cloud server for viewing of user
at remote location Weather Monitoring can be done in Figure 1 : Block diagram of Weather Monitoring 9/36
09/10/2016

either wireless or wired manner.

The Raspberry is cheap, small and rugged which make it Fig2 shows the block diagram of weather parameters
perfect for real world projects? For agricultural Monitoring Project mainly divided into two sections. First
development and industrial management, the proposed Section includes various weather sensors are interfaced
system is useful. with the raspberry pi and at output side indication units

Copyright to IJARCCE DOI 10.17148/IJARCCE.2016.51024 119

 ISSN (Online) 2278-1021
IJARCCE ISSN (Print) 2319 5940

International Journal of Advanced Research in Computer and Communication Engineering

ISO 3297:2007 Certified
Vol. 5, Issue 10, October 2016

like LCD is placed, also there are relays to on and off

control. The BMP180, a widely used digital pressure
sensor.I2C interface is available on BMP180 sensor.
Second sensor, One Wire Digital Temperature Sensor
DS18B20,with a simple 1-Wire interface it measures the
temperature in a wet environment also. The DHT11
Temperature & Humidity Sensor features a temperature &
humidity sensor provides digital output but DHT11 is
mainly used for the humidity measurement. Features of
sensors includes high reliability and long term stability
Weather Meter is useful measurement of three main
factors: wind speed, wind direction and rainfall.
Breadboard friendly, compel and compact board based on Figure2: Raspberry Pi b+ Model
the ATmega328 (Arduino Nano 3.x) orATmega168
(Arduino Nano 2.x commonly known as Arduino nano [ii] LAN Cable (Local Area Network): To access the
included in project. Analog values from weather meter internet in Raspberry Pi we need LAN connection, with
converted to digital values by Arduino and given to the help of which we can access the real time results of
raspberry pi, hence acts as standard ADC but we are using parameters at remote location. The LAN connected
digitally inputted sensors in this project. Low cost weather devices has much more faster speed than the wireless
station or system can be implemented with less connection.
complicated circuitry and easily obtained components. [3] HDMI Display: To see the current status of the
weather as well as the sensors (humidity, pressure,
III. IMPLEMENTATION temperature) and also we will able to check the updates
regarding Raspberry Pi.
A. Component Description:
The proposed system includes following components. [4]The DHT11 is a basic, ultra low-cost digital
[1] Raspberry Pi Board temperature and humidity sensor. It uses a resistive
[2] LAN Cable humidity sensor and a thermistor to measure the
[3] HDMI Display surrounding air, and spits out a digital signal on the data
[4]Atmospheric pressure sensor pin Full range temperature compensated. Relative
[5] Humidity sensor humidity and temperature measurement. Good for 20-80%
[6] Temperature sensor of humidity measurement and 0-50C of temperature
[7] Weather Meter measurement
[8] Keyboard and mouse
[9] Relay Board [5]The BMP180 is the function compatible successor of
the BMP085, a new generation of high precision digital
1. Raspberry Pi pressure sensors for consumer applications. The ultra-low
The Raspberry Pi Foundation implement and developed a power, low voltage electronics of the BMP180 is
Computer in UK of size just like ATM card or a credit optimized for use in mobile phones, PDAs, GPS
card called Raspberry Pi .Linux OS is used on Raspberry navigation devices and outdoor equipment. Pressure range:
Pi and for IoT applications it is used frequently and it can 300 ... 1100hPa (+9000m .500m relating to sea level).
be connected directly to the internet as well as USB ports
to connect to wifi. Raspberry Pis Operating system [6]The DS18B20 Digital Thermometer provides 9 to 12-
supports programming languages like python. For direct bit (configurable) temperature readings which indicate the
connection with the sensors and many other devices temperature of the device. Information is sent to/from the
Raspberry Pi has 40 GPIOs. The credit-card sized laptop DS18B20 over a 1-Wire interface, so that only one wire
can do all the functions like word processing and playing (and ground) needs to be connected from a central
games many more. The Broadcom BCM2835 system microprocessor to a DS18B20.Temperatutre Measurement
based Raspberry Pi consist ofARM1176JZF-S runs on 700 range from -55C to +125C.
MHz processor, and primarily works on 256 megabytes of
RAM, later upgraded (models Band B+) to 512 MB. This [7]Weather Sensor Assembly: This kit includes a wind
system uses micro SD cards for saving data, so it is easier vane, cup anemometer, and tipping bucket rain gauge,
to organize and on equivalent hardware it can run many with associated mounting hardware. These sensors contain
totally different operating systems. The Raspberry Pi no active electronics, instead using sealed magnetic reed
featuring of a 40-Pin GPIO header, 4 x USB ports, 1x switches and magnets to take measurements. A voltage
LAN port, also 1x CSI and 1x Touch Screen interface, 1x must be supplied to each instrument to produce an output.
hdmi port, also 1x integrated audio and video output port.
So there is no need to have large SD card. Figure 1 shows [viii] Relay Board: Relay is an electromechanical switch
the Raspberry Pi B+ Model. which is used in industrial controls, automobiles and home

Copyright to IJARCCE DOI 10.17148/IJARCCE.2016.51024 120

 ISSN (Online) 2278-1021
IJARCCE ISSN (Print) 2319 5940

International Journal of Advanced Research in Computer and Communication Engineering

ISO 3297:2007 Certified
Vol. 5, Issue 10, October 2016

appliances, because of their relative simplicity, long life, controlled and monitored from any web browser, is the
and proven high reliability. In the proposed system we are motive of Dashboards. We can add Blocks to our
using 8-channel relay for switching and controlling the Dashboard. Blocks can be input blocks and some blocks
devices, having 8 independently controlled relays. The can acts as a output blocks. Fig shows the actual output of
Control signals use +5V logic levels and is of TTL all parameters that are included in project
compati

Figure 4: Result displayed on Screen at Remote Location

Figure 3: Interfacing Device with Raspberry Pi IV. RESULTS AND CONCLUSION
B. Software Requirement Thus, we can conclude that the Raspberry Pi efficiently
Programming on Raspberry pi can be done in many ways. does the work of weather station because of its a compact
RPI can run all those programming languages which a yet very powerful device. RPI GPIO library is needed
Linux computer can run. The GCC compiler suite is which gives access to raspberry PIs GPIOs is get
preloaded with raspberry Pi operating system raspbian. accessed by RPI GPIO library which additionally needed
Raspberry pi directly run C programs without any other by for final Programming. and the HTTPLIB which can
installation. access internet connection of raspberry and over internet
data pushed on the server.
Python Data available on cloud server will be vanished
Recommended language mainly for Raspberry Pi is automatically after several interval of time if we want.
Python, while Raspberry works on Linux Operating Comparison shown below satisfies how the discussed
system. Python interpreters allowing Python code to run system is preferable in terms of cost &memory capacity
on a wide variety of systems. Py2exe or PY installer, etc& all the models on +5 supplies. Processor for Model B
Python code packaged into stand-alone executable and B+ is single core while Quad core processor used for
programs for some of the most popular operating systems, Model 2 and Model3.
so without installing python interpreter these codes can be
used easily.Thegitbuh.com consist of variety of user Different Models of Raspberry Pi
libraries for working on raspberry using python efficiently.
Python is designed to be highly readable Python is a Table 1: Raspberry Pi Models Comparison
simplest, dynamic, interpreted, object oriented language.
Parameter Model Model Model 3
Adafruit IO
Cloud server hosting is a type of hosting in which B+ 2
customers or users can use hosting services through Zx
internet. Adafruit IO is one of the most popular cloud GPIO Ports 40 40 40
platforms which used to indicate values of devices at the
input and controls output device through it. This project Processing 700 900 1.2ghz
manly includes sensors which are used as input devices Speed MHZ MHZ
and corresponding values of temperature, atmospheric
pressure and humidity will be reflected on output side, RAM 512MB 1GB 1GB
also relays are used for on and off control which access the
server. Adafruit IO system consist of very important part Bluetooth& No No Yes
called feeds Data get holed by feeds which is then pshed to
Wifi
Adafruit IO. For each unique public or private data there
will be one feed .In this project there is a one feed is
USB ports 4 USB 4USB 4*USB2
allowed for every parameter that are included and shows
the updated information. Dashboards is plays an important ports
role in Adafruit IO. Adafruit IO connected projects can be

Copyright to IJARCCE DOI 10.17148/IJARCCE.2016.51024 121

 ISSN (Online) 2278-1021
IJARCCE ISSN (Print) 2319 5940

International Journal of Advanced Research in Computer and Communication Engineering

ISO 3297:2007 Certified
Vol. 5, Issue 10, October 2016

V. FUTURE SCOPE BIOGRAPHIES

The future of this system is very wide. Internet of Things Meetali V Rasal is pursuing M.E. in the
is just opening its arms, Same system can be applicable to stream of Electronics Engineering from
the variety of applications like Data monitoring ,sending M.G.Ms Jawaharlal Nehru Engineering
and controlling of data at remote location. College Aurangabad, Maharashtra, India.
She has completed her B.E. in the stream
In this project I have used sensors with digital input but of Electronics and Telecommunication Engineering, from
with suitable A-D convertor we can easily use sensors M.G.Ms Jawaharlal Nehru Engineering College
with analog input. As applications are literally limitless we Aurangabad, Maharashtra, India in 2014.Her areas of
can send SMS or E-mail through Raspberry Pi. interest are, embedded system Communication systems
and Signal Processing
Thus, such a system can be readily implemented using a
low cost computer like Raspberry Pi which can function Jaideep G. Ranais working as a HOD
like a complete computer. and Professor in the Department of
Electronics Engineering at M.G.Ms
Using moisture sensor Automatic irrigation control can be Jawaharlal Nehru Engineering College
done in order to get information about field and Aurangabad, Maharashtra, India. He has
accordingly water pump will turn on. Data can be teaching experience of 27 years. He has published more
monitored using infrared sensors and pressure sensors in than 25 papers in different national and international
Surveillance system Journals. He has guided more than 100 UG and PG
students for their projects. His areas of interest are
ACKNOWLEDGMENT Microprocessor, Microcontroller, and Digital System
Design
I express my sense of gratitude and sincere regards to my
guide Prof J. G. Rana. He inspired and guided me at all
stages of this project work.

REFERENCES

[1] International Journal of Engineering Trends and Technology

(IJETT) Volume 33 - March 2016An AutomatedThingSpeak
Weather Monitoring System using Raspberry PIM. Ramesh1, Dr.
S.A.K. Jilani2, Mr.S.Arun3 Department of Electronics
&Communication Engineering, MITS, Madanapalle, India
[2] International Journal of Engineering Research & Technology
(IJERT)ISSN: 2278-018IJERTV3IS090619 Vol. 3 Issue 9,
September- 2014Modular Weather and Environment Monitoring
Systems using Raspberry Pi Kuruvadi Praveen ,AnkhitBala
Venkata Department of Telecommunications BMS College of
Engineering Bangalore, India
[3] The International Journal of Engineering and Science (IJES)
Volume 4 2015 ISSN (e): 2319 1813 Zigbee based weather
monitoring system
[4] Low-Cost controller-based Weather MonitoringSystem-
CMAJournal (2006)
[5] International Journal of Computer technology July 2014 Design and
Implementation of Weather Monitoring and Controlling Systems.
[6] Article Publishedon Wireless Remote sensing Weather
Monitoring Based on MEMS .
[7] Synopsis for SMS based Weather reportinformation system
[8] International Journal of Computer Science, Vol. (1) , Design of
ARM based Embedded Web Server for Agricultural Application
[9] DeHennis, A. D., and K. D. Wise.A wirelessmicrosystem for the
sensing of temperature, and relative humidity. Journal Micro electro
mechanical Systems 14(1):ISO7730. 1984, Geneva, Switzerland.
[10] Moghavvemi, M., K., C. Y. Soo, and S. Y. Tan.2005.A reliable
and feasible remote sensing system for temperature and humidity
measurement. Sensors and Actuators A 117: 181185.
[11] Ong, K. G., , C. L. Robbins, and R. S. Singh. 2001.Design of a
wireless, passive, resonant-circuit. environmental monitoring
sensors. Sensors and Actuators A 93: 3343.
[12] Documentation for the Python programming language
:http://www.python.org.

Copyright to IJARCCE DOI 10.17148/IJARCCE.2016.51024 122