RIBBED SLAB DESIGN To BS 81101997 Using Table 3.12 Coefficients
RIBBED SLAB DESIGN To BS 81101997 Using Table 3.12 Coefficients
RIBBED SLAB DESIGN To BS 81101997 Using Table 3.12 Coefficients
LOADING
Self Wt kN/m 4.00
+ Dead kN/m 1.50
Total Dead, gk kN/m 5.50
Imposed qk kN/m 5.00 A F A F
Design load, n = kN/m 15.70 Geometry and Loading Indicative Bending Moment Diagram
OUTPUT/SUMMARY
END END FIRST INT INTERIOR INTERNAL
PROVIDE SUPPORTS SPANS SUPPORTS SPANS SUPPORTS
MAIN STEEL 3T10 /rib 2T8 T 2T20 /rib 2T8 T 2T20 /rib
+ 3T10 T + 2T10 T + 2T10 T
Nominal B 2T20 B Nominal B 2T16 B Nominal B
LINKS 2R6 @ 175 2R6 @ 175 2R6 @ 175 2R6 @ 175 2R6 @ 175
from edge of solid for 875 for 175
RIB SHEAR
END FIRST INT INTERNAL
SUPPORTS SUPPORTS SUPPORTS
Factor 0.46 0.6 0.5 Table 3.12
V max kN/m 52.01 67.85 56.54 -=-
V rib kN/m 37.24 44.99 36.51
v N/mm 0.8625 1.0630 0.8626 Eqn 3
vc N/mm 0.8975 0.9080 0.9080 NOMINAL Table 3.8
(v-vc)bv N/mm 68.0 68.0 68.0 68.0 Table 3.7
Link ok 6 ok 6 ok 6 ok 6 3.12.7.1
@ mm 191 187 187 196 Spacing
adjust to mm 175 175 175 175 Spacing
for mm 0 795 75 --- from solid
adjust to mm 0 875 175 --- from solid
As Dist ok 130.8 ok 121.8 ok 121.8 ok 125.4 OK 3.4.5.5
BOTTOM STEEL
LINKS
SUMMARY Density = 11.2 kg/mApprox. total reinf. per rib (kg) 303.7
Project Spreadsheets to BS 8110
Location 2nd Floor slab
RIBBED SLAB DESIGN to BS 8110:1997 using table 3.12 coefficients GRAPH DATA I Made by rmw Job No R68
Originated from RCC92.xls on CD 1999 BCA for RCC Date 8-Aug-17
LOADING DIAGRAM
Support 1 2 3 4 5 6 7 8 9 gk = 5.50 gk = 5.50 kN/m
Distance 0 0 7.2 14.4 21.6 28.8 36 36 36 36 36 qk = 5.00 qk = 5.00 kN/m
Dead 0 5.00 5 5 5 5 5 0 0 0 0
Imposed 5 6.50 6.5 6.5 6.5 6.5 6.5 5 5 5 5
Base 0 0 0 0 0 0 0 0 0 0 0
1 2 3 4 5 6 7 8 9
Grids 0 0 7.2 7.2 14.4 14.4 21.6 21.6 28.8 28.8 36 36 36 36 36 36 36 36
-1.3 0 -1.3 0.00 -1.3 0 -1.3 0 -1.3 0 -1.3 0 -1.3 0 -1.3 0 -1.3 0
BM DIAGRAM
Support 1 End 2 Mid 3 Mid
Local X 0 0 0.72 1.44 2.16 2.88 3.6 4.32 5.04 5.76 6.48 0 0.72 1.44 2.16 2.88 3.6 4.32 5.04 5.76 6.48 0 0.72 1.44 2.16 2.88 3.6
Global X 0 0 0.72 1.44 2.16 2.88 3.6 4.32 5.04 5.76 6.48 7.2 7.92 8.64 9.36 10.08 10.8 11.52 12.24 12.96 13.68 14.4 15.12 15.84 16.56 17.28 18
Base 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Moment 0 16.283 -14.98 -38.102 -53.082 -59.921 -58.619 -49.174 -31.589 -5.8619 28.007 70.017 31.507 1.1398 -21.086 -35.171 -41.114 -38.916 -28.577 -10.095 16.527 51.291 14.655 -13.84 -34.194 -46.406 -50.477
36.637 65.132 85.485 97.698 101.77 97.6975 85.485 65.132 36.637
B Labels A to grid 2
M Labels 32.566 61.061 70.017 51.291 51.291 51.291
Grids 0 0 7.2 7.2 14.4 14.4 21.6 21.6 28.8 28.8 36 36 36 36 36 36 36 36
-59.921 77.018 -59.921 77.018 -59.921 77.0182 -59.921 77.018 -59.921 77.018 -59.921 77.018 -59.921 77.018 -59.921 77.018 -59.921 77.018
Project Spreadsheets to BS 8110 Project
Location 2nd Floor slab Location
RIBBED SLAB DESIGN to BS 8110:1997 using table 3.12 coefficients GRAPH DATA II Made by rmw Job No R68
Originated from RCC92.xls on CD 1999 BCA for RCC Date 8-Aug-17
4 Mid 5 End 6
4.32 5.04 5.76 6.48 0 0.72 1.44 2.16 2.88 3.6 4.32 5.04 5.76 6.48 0 0.72 1.44 2.16 2.88 3.6 4.32 5.04 5.76 6.48 0 0 0 0 0
18.72 19.44 20.16 20.88 21.6 22.32 23.04 23.76 24.48 25.2 25.92 26.64 27.36 28.08 28.8 29.52 30.24 30.96 31.68 32.4 33.12 33.84 34.56 35.28 36 36 36 36 36
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-46.406 -34.194 -13.84 14.655 51.291 16.527 -10.095 -28.577 -38.916 -41.114 -35.171 -21.086 1.1398 31.507 70.017 28.007 -5.8619 -31.589 -49.174 -58.619 -59.921 -53.082 -38.102 -14.98 16.283 0 0 0 0
0 0 3
51.291 51.291 70.017 61.061 32.566
Spreadsheets to BS 8110
2nd Floor slab
RIBBED SLAB DESIGN to BS 8110:1997 using table 3.12 coefficients GRAPH DATA III Made by rmw Job No R68
Originated from RCC92.xls on CD 1999 BCA for RCC Date 8-Aug-17
0 7 0 8 0 9
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 4
Disclaimer
All advice or information from the British Cement Association and/or Reinforced Concrete
Council is intended for those who will evaluate the significance and limitations of its contents
and take responsibility for its use and application. No liability (including that for negligence)
for any loss resulting from such advice or information is accepted by the BCA, RCC or their
subcontractors, suppliers or advisors. Users should note that all BCA software and
publications are subject to revision from time to time and should therefore ensure that they
are in possession of the latest version.
Status of spreadsheet
Public release version.
panying publication
rom British Cement
Size (kB)
203