Shell Spirax S5 ATF X

Technical Data Sheet
Shell Spirax S5 ATF X

Premium, Synthetic Technology Multi-Vehicle Automatic Transmission Fluid
Shell Spirax S5 ATF X is a premium performance, synthetic technology fluid designed to meet the needs of multiple
vehicle types for service fill in automatic transmission service. Shell Spirax S5 ATF X meets the needs of many Asian
and North American designed automatic transmissions.
Main Applications Dependable anti-wear and gear protection

Long component life.
Low temperature performance

Excellent oil fluidity at low temperatures.
Passenger car automatic transmissions

Synthetic base fluids
Heavy duty automatic transmissions Excellent fluid life in the most demanding applications.
Power steering units

Specifications, Approvals & Recommendations
Hydraulic systems requiring this grade of fluid
Suitable for use in applications which require
Performance, Features & Benefits Allison C-4
Friction modified Aisin JWS 3309 (all applications)

Provides consistent, reliable, smooth and trouble free
JASO 1-A, 2A-02
operation of automotive transmission systems.

Ford Mercon V, Mercon
Exceptionally high oxidation resistance
General Motors Dexron, Dexron II, Dexron III
Resistant to oil degradation and keeps automatic transmissions
clean. Toyota T III, T IV
Excellent shear-stability
A special 'VI' improver minimises the changes in viscosity with
See the Application Table and notes for additional vehicle
coverage
For a full listing of equipment approvals and recommendations,

operating temperature.
please consult your local Shell Technical Helpdesk.
Typical Physical Characteristics
Properties Method Shell Spirax S5 ATF X

Flash Point (COC) 0
C ASTM D92 190
Viscosity @-40 C0
mPa s ASTM D2983 12000
Viscosity @400C mm2/s ASTM D445 35
Viscosity @1000C mm2/s ASTM D445 7.2
Density @150C kg/m3 ASTM D1298 850
These characteristics are typical of current production. Whilst future production will conform to Shell's specification, variations in
these characteristics may occur.
Page 1 of 3 Shell Spirax S5 ATF X, v 2.2 01.12.2014.08.47

Application Table
Spirax S5 ATF-X is suitable for use in the following:
Manufacturer Fluid Specification Manufacturer Fluid Specification

Aisin JWS 3309 Mercedes-Benz Pre-1996
Allison C4 Mini 83 2 0 402 42
Audi G 055 025-A2 Mitsubishi Diamond SP-II
Audi G 052 162-A1 Mitsubishi Diamond SP-III
BMW LA2634, ETL-7045E Nissan/ Infiniti Matic-D
BMW LT71141 Nissan/ Infiniti Matic-J (Note 3)
Fiat 9.55550 AV Nissan/ Infiniti Matic-K
Ford MERCON Porshe JWS 3309 (Cayenne)
Ford MERCON V Saab JWS 3309 and 5 Speed Automatics,
Transmax J, TIV
Ford M2C138-CJ Scion T-II, T-III, T-IV
Ford M2C166-H Subaru ATF
Ford M2C202-B Subaru ATF-HP
Ford WSS-M2C924-A (JWS 3309 in Five Suzuki Dexron III
Hundred and Montego)
Ford M2C922-A1 Texaco ETL-7045E, N402
GM Type A, Suffix A Toyota Type T-II
GM/Saturn 9986195 (JWS 3309) Toyota Type T-III, and where a Dexron III fluid is
allowed
GM DEXRON Toyota/ Lexus Type T-IV
GM DEXRON-II Voith 55.6335.32 (G607, G1363) Voith DIWA
#013S
GM DEXRON-II D Volvo JWS 3309, 5 Speed Automatics
GM DEXRON-IIIG,IIIH Volvo Volvo 1273.41 and 97340
Honda/Acura Premium Various ZF TE-ML 14B
Honda/Acura ATF-Z1 Various ZF-TE-ML 16L
Hyundai SP-II or SP-III Various JWS-3309
Idemitsu K17 VW G 055 25-A2, TL-5612, TL-52162
Isuzu SCS, ATF-II, ATF-III, Genuine ZF TE-ML 02F
JASO JASO 1A ZF TE-ML 03D
Kia SP-II or SP-III ZF TE-ML 04D
Kia ATF Red I-K ZF TE-ML 09
MAN 339F Ty V-1, V-2, Z-1, Z-2, Z-3 ZF TE-ML 11A
Mazda ATF M-111 ZF TE-ML 14A/14B/14C
Mazda ATF MV ZF TE-ML 16L
Mercedes-Benz Sheet 236.1, 236.2, 236.5, 236.6, ZF TE-ML 17C
236.7, 236.9, 236.10
Shell Spirax S5 ATF X is suitable in many Kia, pre-2003 VW/Audi, Mazda, Subaru, Suzuki, Isuzu, Hyundai, Daewoo
transmissions where a DEXRON/MERCON/MERCON V fluid is allowed.
Application Exceptions
1) Shell Spirax S5 ATF X should not be used where Type F fluids are recommended; check application manual if the vehicle is one
of the following: Datsun/Nissan pre 1971, Lincoln pre 1978, Ford/Mercury pre 1981, Toyota pre 1983, Volvo pre 1985, Mazda
pre 1986, Saab pre 1993.
2) Shell Spirax S5 ATF X should not be used in Continuous Variable Transmissions (CVTs) or Double Clutch Transmissions (DCTs).
3) Shell Spirax S5 ATF X does not meet the low viscosity requirements of 2006 and later GM vehicles requiring DEXRON-VI,
Ford applications requiring Ford MERCON LV or Mercon SP, Shell 1375.4, Toyota WS, Hyundai SP-IV or SPH-IVRR, Nissan
Matic-S, Honda ATF DW-1, Chrysler ZF 8 and 9 speed ATF, other ZF 8 and 9-speed ATFs (in a number of European cars), newer
Daimler transmissions (ATF 134 or later MB Approval 236.12, 236.14, 236.15 or 236.16) and other specialty transmissions
where a low viscosity ATF is recommended.
Where applications allow use of an alternate fluid of a higher viscosity (example Nissan Matic-J when Nissan Matic-S is not
available) to one of the above fluid specifications, Pennzoil PlatinumTM High Mileage & Import MV ATF is an excellent
recommendation.

DEXRON is a registered trademark of General Motors Corporation. MERCON is a registered trademark of Ford Motor Company.
Health, Safety & Environment
Health and Safety
Shell Spirax S5 ATF X is unlikely to present any significant health or safety hazard when properly used in the recommended
application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from
http://www.epc.shell.com/
Protect the Environment

Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
Colour
Shell Spirax S5 ATF X is dyed red for identification purposes.
Advice
Advice on applications not covered here may be obtained from your Shell representative.

Shell Spirax S5 ATF X

Uploaded by

Copyright:

Available Formats

Shell Spirax S5 ATF X

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Shell Spirax S5 ATF X

Uploaded by

Copyright:

Available Formats

Technical Data Sheet

Shell Spirax S5 ATF X

Main Applications Dependable anti-wear and gear protection

Low temperature performance

Passenger car automatic transmissions

Power steering units

Performance, Features & Benefits Allison C-4

Friction modified Aisin JWS 3309 (all applications)

operation of automotive transmission systems.

For a full listing of equipment approvals and recommendations,

Typical Physical Characteristics

Properties Method Shell Spirax S5 ATF X

Viscosity @400C mm2/s ASTM D445 35

Viscosity @1000C mm2/s ASTM D445 7.2

Density @150C kg/m3 ASTM D1298 850

Page 1 of 3 Shell Spirax S5 ATF X, v 2.2 01.12.2014.08.47

Manufacturer Fluid Specification Manufacturer Fluid Specification

Page 2 of 3 Shell Spirax S5 ATF X, v 2.2 01.12.2014.08.47

Health, Safety & Environment

Health and Safety

Protect the Environment

Page 3 of 3 Shell Spirax S5 ATF X, v 2.2 01.12.2014.08.47

You might also like