PB-0915

Single Blind PB19

SPECTACLE BLINDS | CLOSED BLINDS
OPEN BLINDS (RING SPACER)

When Total System Isolation is required -

Titan Blinds provide Complete, Positive Shutoff.
Spectacle Blind PB18
Vapor Blinds, Test Blinds and Bleed Rings are also available.
Ring Spacer PB20 Contact Us for more information.
Handle style may vary, consult factory for details.

All pictures shown are for illustrative purposes only.

Actual product may vary due to product enhancement.

Models Benefits of Titan Blinds

Provides Permanent - Positive Shutoff Quick - One Man Operation
Name Description Promotes Safety during downstream Service Operations Long Service Life
Spectacle Blinds provide Visible Shutoff Can be used with liquids, solids,
PB 18 Spectacle Blind Economical Solution when compared to Isolation Valves slurries, and gases
PB 19 Single Blind
PB 20 Ring Spacer Body Materials
Standard materials are stainless steel and carbon steel. Contact factory for additional materials. Special
Coatings are also available for highly corrosive applications.
Materials
Stainless Steel Seat Materials
Carbon Steel A variety of O-Ring Seats are available including Viton, Buna-N, and Teflon. Contact factory for more
information.

End Connections
Available with raised or flat-faced blinds. Ring type joints are also available.

Finishes
Available with serrated (phonographic style) surface or ground finished. Surface dimension in
Micro-inch ASA 500, 250, 125, 63, or 32 should be specified; standard is a smooth finish.

Standards
Various Titan FCIs Spectacle Blinds, Single Blinds, and Ring Spacers are designed in accordance with ASME
Finishes
Available
B16.48 - Line Blanks.

Note: Pipeline Blinds are not the same as bolted on, Blind Flanges.

Illustrations represent Titan FCIs fabricated PB 18, PB 19, & PB 20. Titans fabricated products are made to each customers unique specifications. Dimensions, materials, illustrations, and all other product details
referenced in this literature are general in nature. All pictures shown are for illustrative purposes only. Actual product may vary due to product enhancement. Some options may not be available in all sizes and/or
models. Titan FCI reserves the right to make design and specification changes to improve the products without prior notification. For exact product specifications, please consult the Titan FCI factory and
request certified engineering drawings.

Tel: 910-735-0000 Fax: 910-738-3848 [email protected]

TITAN 290 Corporate Drive PO Box 7408 Lumberton, NC 28358 www.titanfci.com
TITAN FLOW CONTROL, INC

23
PB-0915

290 Corporate Dr Lumberton, NC 28358 Spectacle Blinds and Single Blinds

TITAN www.titanfci.com [email protected]

TITAN FLOW CONTROL, INC

Phone: 910.735.0000 Fax: 910.738.3848 PB 18 | PB 19 | PB 20

PB 20
Ring Spacer
ANSI CLASS 150 BLINDS H G (Open Blind)
Nominal
Pipe Size (2) A B C D E F
I
(ID) (OD) (Ctr. to Ctr.) (Pivot Hole) (Web Width) (Thickness)
1/2 0.62 1.75 2.38 0.62 1.5 0.12
3/4 0.82 2.12 2.75 0.62 1.5 0.12 F
1 1.05 2.5 3.12 0.62 1.5 0.12
A
C
B
1 1/4 1.66 2.88 3.5 0.62 1.5 0.25
E
1 1/2 1.9 3.25 3.88 0.62 1.5 0.25
2 2.38 4 4.75 0.75 2 0.25 D
H G
2 1/2 2.88 4.75 5.5 0.75 2 0.25 F
3 3.5 5.25 6 0.75 2.5 0.25 A
3 1/2 4 6.25 7 0.75 2.5 0.38
B
PB 18
4 4.5 6.75 7.5 0.75 2.5 0.38 Spectacle
F Blind
5 5.56 7.62 8.5 0.88 3 0.38 B
PB 19
6 6.62 8.62 9.5 0.88 3 0.5 Single Blind
8 8.62 10.88 11.75 0.88 3 0.5 (Closed or blank)

10 10.75 13.25 14.25 1 4 0.62 Illustrations represent Titan FCIs fabricated PB

Handle Dimensions (All Classes) 18, PB 19, & PB 20. Titans fabricated products are
12 12.75 16 17 1 4 0.75 made to each customers unique specifications.
Size Ranges G (Length) H (Width) I (Hole) Dimensions, materials, illustrations, and all other
14 14 17.62 18.75 1.12 4.25 0.75 product details referenced in this literature are
" - 3" 4 1 0.5 general in nature. Some options may not be
16 16 20.12 21.25 1.12 4.25 0.88 available in all sizes and/or models. Titan FCI
3" - 10" 5 1 0.5 reserves the right to make design and specification
18 18 21.5 22.75 1.25 4.5 1 changes to improve the products without prior
12" 5 1.5 0.75
20 20 23.75 25 1.25 4.75 1.12 notification. For exact product specifications,
please consult the Titan FCI factory and request
14" - 24" 6 1.5 0.75 certified engineering drawings.
24 24 28.12 29.5 1.38 5.5 1.12

ANSI CLASS 300 BLINDS Nominal

ANSI CLASS 600 BLINDS
Nominal
Pipe
Pipe Size (2) A B C D E F Size (2)
A B C D E F
(ID) (OD) (Ctr. to Ctr.) (Pivot Hole) (Web Width) (Thickness) (ID) (OD) (Ctr. to Ctr.) (Pivot Hole) (Web Width) (Thickness)
1/2 0.62 2 2.62 0.62 1.5 0.25 1/2 0.62 2 2.62 0.62 1.5 0.25
3/4 0.82 2.5 3.25 0.75 1.5 0.25 3/4 0.82 2.5 3.25 0.75 1.62 0.25
1 1.05 2.75 3.5 0.75 1.5 0.25 1 1.05 2.75 3.5 0.75 2.25 0.25
1 1/4 1.66 3.12 3.88 0.75 1.5 0.25 1 1/4 1.44 3.12 3.87 0.75 2 0.38
1 1/2 1.9 3.62 4.5 0.88 2 0.25 1 1/2 1.68 3.62 4.5 0.88 2.62 0.38
2 2.38 4.25 5 0.75 2 0.38 2 2.16 4.25 5 0.75 2.25 0.38
2 1/2 2.88 5 5.88 0.88 2.5 0.38 2 1/2 2.64 5 5.87 0.88 2.62 0.5
3 3.5 5.75 6.62 0.88 2.5 0.38 3 3.26 5.75 6.62 0.88 2.62 0.5
3 1/2 4 6.38 7.25 0.88 2.5 0.5 3 1/2 3.76 6.25 7.25 1 3 0.62
4 4.5 7 7.88 0.88 2.5 0.5 4 4.26 7.5 8.5 1 3 0.62
5 5.56 8.38 9.25 0.88 3 0.62 5 5.3 9.38 10.5 1.12 3.37 0.75
6 6.62 9.75 10.62 0.88 3 0.62 6 6.36 10.38 11.5 1.12 3.37 0.88
8 8.62 12 13 1 3 0.88 8 8.33 12.5 13.75 1.25 3.75 1.12
10 10.75 14.12 15.25 1.12 4 1 10 10.42 15.62 17 1.37 4.12 1.38
12 12.75 16.5 17.75 1.25 4 1.12 12 12.39 17.88 19.25 1.37 4.12 1.62
14 14 19 20.25 1.25 4.25 1.25 14 13.62 19.25 20.75 1.5 4.5 1.75
16 16 21.12 22.5 1.38 4.25 1.5 16 15.62 22.12 23.75 1.62 4.87 2
18 18 23.38 24.75 1.38 4.5 1.62 18 17.62 24 25.75 1.75 5.25 2.12
20 20 25.62 27 1.38 4.75 1.75 20 19.56 26.75 28.5 1.75 5.25 2.5
24 24 30.38 32 1.62 5.5 2 24 23.5 31 33 2 6 2.88

Titan FCIs fabricated products are made to each customers unique specifications. Dimensions, materials, and all other product details referenced in this literature are general in nature. Some
options may not be available in all sizes and/or models. Titan FCI reserves the right to make design and specification changes to improve the products without prior notification.
24 For exact product specifications, please consult the Titan FCI factory and request certified engineering drawings.