Mini-Sub type 8FB20 upto 24kV

Solution for Quality Power....

Answers for energy.

Technical Data, Design & Construction

Medium Voltage Mini-Sub type 8FB20 upto 24kV

Solution for Quality Power.....

General Characteristics Electrical Data

0
Ambient temperature upto 40 C Reference standard IEC62271-202
Standard Colour RAL7032 Rated voltage 12/24Kv1
Duty Outdoor/Indoor Rated power frequency
Enclosure degree of protection withstand voltage kV rms, min 28/50kV2
X'mer compartment IP23 Rated lightning impulse
MV/LV compartment IP54 withstand voltage kV, 1.2/50 S 75/125kV2
Type of ventilation Natural X'mer rating upto 1600kVA
Rated enclosure class 15 1
RMU type - 8DJH for 24kV
2
Higher BIL available on request

Siemens has been serving the Indian market with a

wide range of Medium voltage Power Distribution
Standard Variants
Systems for more than four decades. Siemens Mini-Sub
(MSS) is a product from the MV Distribution product RMU Xmer LV dist
family and is designed keeping in mind the fast
growing power needs of Indian cities, combined with ACB
LV
reduced urban space availability. MV MCCB
The MSS can be ideally installed in residential and
commercial complexes, industrial environments,
utilities where free space is a major constraint.
8FB20-201
Key Features:
Factory built and tested RMU Xmer LV dist
Tailor made options to cater different requirements
Easy and simple to install reducing the on-site ACB
LV
operation MV
MCCB
Ready for network connection
Design complies to new IEC 62271-202
Maintenance free SF6 insulated Ring Main Unit for MV Metering
MV networking
SCADA compatible equipments 8FB20-202
Available with oil cooled/dry type transformers up to
1600kVA
RMU Xmer LV dist
Rust, corrosion and weather proof enclosure
Independent access for all the compartments for
ACB
routine maintenance LV
MV MCCB

APFC

8FB20-203
Equipment Details

Electrical equipment in the Mini-Sub

MV Switchgear: The Mini-Sub is designed for lifting along with the

Ring Main Unit type 8DJHST in Mini-Sub transformer fitted inside
Maintenance free
Gas insulated metal enclosed RMU is used for the MV Low Voltage Distribution:
networking in the Mini-Sub Mini-Sub is designed to house tailor made solutions
Ring feeders are provided with three position for different LV distribution
disconnector switch, while transformer feeders are Product range includes Air Circuit Breakers, Moulded
provided with circuit breaker acting as three position Case Circuit Breakers, fuse switches
switch Solutions for automatic supply changeover in case of
Block type construction supply failure by providing DG incomer in tandem
with Mini-Sub transformer incomer
Cable connection are from front
Capacitor panel with automatic power factor
Logical mechanical interlocks
regulation rated as per transformer capacity
Manual operating mechanism (option: with motor)
Capacitive voltage detection system for all the feeders
Internal Connections & Accessories:
Extensible version available on request
MV to transformer with MV cables
LV to transformer with busbars/LV cables
Distribution Transformer:
Cables connections inside the RMU with elbow cable
Mini-Sub is designed for transformers rating upto
adaptors
1600kVA/24kV
MV connections at transformer with high voltage
Oil cooled hermitically sealed/dry type transformers
insulation or optionally with elbow connectors
Transformer is factory fitted inside the Mini-Sub
Optionally the transformer can be installed at site
Product Range

L Product Overview
Mini-Sub comprises:
LV 2mm thick CRC steel sheet enclosure mounted on a
Distribution
hot-dip galvanized ISMC Channel. Doors on each side
of the Mini-Sub provide access to the MV RMU, LV
W
and transformer.
MV RMU MV switchgear is a compact SF6-insulated ring main
unit with VCB for transformer switching.
Transformer can be either oil cooled or dry type.
LV distribution is done with the help of incoming ACB
and outgoing MCCB/switch fuse. This can be
customized as per the requirement.
Outdoor Outdoor
L.V. Panel R.M.U Optional APFC panel can be accommodated with up
to 400kVAr capacitor bank controlled by an intelligent
microprocessor based power factor correction relay
with data logger.
Cable entries are from bottom.

Model Standard Variants

8FB20-201 MV with 3 way RMU with up to 1600kVA transformer and LV
8FB20-202 MV with 3 way RMU with MV metering, up to 1600kVA transformer and LV
8FB20-203 MV with 3 way RMU with up to 1600kVA transformer, APFC & LV

Note:- Combination of 8FB20-202 & 203 is also available on request.

RMU with different configuration are also available as per the requirement

Dimensions L* W H
8FB20-201 2800 2200 22001
8FB20-202 3350 2200 22001
8FB20-203 3350 2200 22001
1
For 1600kVA rating the height of the mini-sub 8FB20
shall be 2650.
*Dimensions with 3 way RMU for MV side. The same
may vary depending on the RMU configuration.

Transport and Installation:

Mini-Sub are delivered with protective covering for
local shipment and packed for sea shipment for
export.
Local transport is done on open truck and for export
the same is done in open top containers.
Mini-Sub are factory assembled and ready for
installation on the concrete foundation provided at
site.
The internal connections are done in factory and only
the network cables are to be connected at site.
Product Quality and Customer Benefits

Quality Assurance: by providing lockable doors and mechanically

The Mini-Sub is manufactured in accordance with the interlocked covers.
latest IEC 62271-202 and Siemens high standards for
quality and environment (ISO9001 and ISO 14001).
Modular Design:
Factory assembled Mini-Sub is ready for installation. In
Personal Safety: areas where completely assembled unit cannot be
All live parts in the Mini-Sub are protected against transported, the Mini-Sub can be dispatched in
unintentional contact by means of lockable / modular form and can be installed at site. Modular and
mechanically interlocked door and covers. The Low completely bolted design allows this flexibility to over-
voltage parts are also protected with unintentional come the space crunch.
contact. The enclosure of the Mini-Sub is effectively
earthed with the earth busbar forming a grid inside the
Advantages:
Mini-Sub interconnecting all the equipments. Provision Complying with latest IEC 62271-202 for unitized
for connecting the external grid earth is given on either substation
sides of the Mini-Sub. Different range of distribution transformers
Maintenance free ring main unit type 8DJHST is used
Climatic and Environmental Protection: for MV networking, type tested for internal arc fault
The Mini-Sub enclosure is designed for withstanding All live parts in the Mini-Sub are protected against
the harsh climatic conditions by high quality surface unintentional contact by means of lockable doors
treatment and powder coated paint as per proven Reduced overall plant and operating costs
Siemens standards. Unmanned substation
This ensures the exterior/interior finish remains Intact Compact: Can be installed in a limited space of
for all the environmental and climatic changes. All the 6 sq. meter
parts are designed to take care of outdoor and vandal Appealing aesthetics
free installations. Protection against theft is taken care
Would you like to find out more ?
Please do not hesitate to contact us at any of the following address:

Siemens Ltd. Siemens Ltd.

Energy Sector Industry Sector
Power Distribution Division Building Technologies Division
Medium Voltage Low Voltage Global Components
Thane Belapur Road Thane Belapur Road
Thane 400 601, India Thane 400 601, India
Tel.: +91 22 2762 3140 Fax: +91 22 2764 5627
www.siemens.com/energy Email: [email protected]
www.siemens.com/industry
Customer Care Toll Free No.: 1800 220 987
Email: [email protected]
Product development is a continuous process. Consequently the data
indicated in this booklet is subject to change without prior notice.
For latest issue contact our Sales Office.

Siemens Ltd.
ENE-03-115-001