Scribd
Upload
586 views1 page

05 - C-Purlin Design

This document provides the design criteria for a C-PURLIN member made of 1 # - 50 x 200 mm LC steel. The key dimensions and properties of the cross-section are specified. The load calculations, including dead and live loads, are shown. Bending and shear checks are performed and the section is found to be adequate with required section moduli less than the provided section moduli in both the x and y axes.

Uploaded by

Joseph Cloyd L. Lamberte
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
586 views1 page

05 - C-Purlin Design

This document provides the design criteria for a C-PURLIN member made of 1 # - 50 x 200 mm LC steel. The key dimensions and properties of the cross-section are specified. The load calculations, including dead and live loads, are shown. Bending and shear checks are performed and the section is found to be adequate with required section moduli less than the provided section moduli in both the x and y axes.

Uploaded by

Joseph Cloyd L. Lamberte
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

C-PURLIN Design

DESIGN CRITERIA: VERSION: 2.2.3


Material = 1 # - 50 x 200 mm LC (Steel) Member: C-PURLIN
Dimension:
depth = 200 mm Quantity = 1
width = 50 mm 50
Cee = 15 mm
thickness = 2 mm 15
Fy = 270 MPa
fb = 189 MPa
2
Area = 660 mm 2
3
Sx = 27371 mm

200
3
Sy = 6316 mm
Length = 7000 mm
Spacing = 800 mm
2
DL = 1050 N/m 15
WLL = 1440 N/m2
Load:
DL = 0.840000 kN/m
WL = 1.152000 kN/m

DESIGN DETAILS:
Rise = 1.5 m
Run = 14.98 m
Angle = 0.09980084 rad
Theta = 5.718171765 degrees

Due to DL:
Wn = 0.835820184 kN/m
Wt = 0.08369361 kN/m
Due to DL + WL:
Wn = 0.310447487 kN/m
Wt = 0.08369361 kN/m

Design Load:
Wn = 0.835820184 kN/m
Wt = 0.08369361 kN/m

Mn = 5119.398626 N-m
Mt = 512.6233604 N-m

Required Section Modulus:


Sx = 27086.76522 mm^3
Sy = 2712.292912 mm^3

REMARKS:
Sx = 27370.75 > 27086.77 SAFE
Sy = 6315.90 > 2712.29 SAFE
Program Created by: JOSEPH CLOYD L. LAMBERTE, MSCE, PICE, SEAD Program Licensed to: Engr. Joseph Cloyd L. Lamberte

You might also like