Scribd Logo
Upload

Welcome to Scribd!

  • 54 views

    Bench Marking For Smart Controls

    Uploaded by

    Venu Gopal Kalakota
    1. The document discusses four different home automation systems: a Bluetooth system, a DTMF phone-based system, an Arduino-based system, and a Raspberry Pi internet-of-things system. 2. The Bluetooth system uses an ATmega8 microcontroller and Bluetooth to control appliances from an Android phone within a small coverage area. The DTMF system uses a phone's keypad tones decoded by an MT8890 chip to control devices via a limited number of combinations. 3. The Arduino-based system uses PIR and motion sensors along with one-time passwords for security but can struggle with processing many connected devices. The Raspberry Pi system monitors devices connected via relays and displays updates

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    Bench Marking For Smart Controls

    Uploaded by

    Venu Gopal Kalakota
    54 views2 pages
    1. The document discusses four different home automation systems: a Bluetooth system, a DTMF phone-based system, an Arduino-based system, and a Raspberry Pi internet-of-things system. 2. The Bluetooth system uses an ATmega8 microcontroller and Bluetooth to control appliances from an Android phone within a small coverage area. The DTMF system uses a phone's keypad tones decoded by an MT8890 chip to control devices via a limited number of combinations. 3. The Arduino-based system uses PIR and motion sensors along with one-time passwords for security but can struggle with processing many connected devices. The Raspberry Pi system monitors devices connected via relays and displays updates

    Original Description:

    bench

    Original Title

    Bench

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    1. The document discusses four different home automation systems: a Bluetooth system, a DTMF phone-based system, an Arduino-based system, and a Raspberry Pi internet-of-things system. 2. The Bluetooth system uses an ATmega8 microcontroller and Bluetooth to control appliances from an Android phone within a small coverage area. The DTMF system uses a phone's keypad tones decoded by an MT8890 chip to control devices via a limited number of combinations. 3. The Arduino-based system uses PIR and motion sensors along with one-time passwords for security but can struggle with processing many connected devices. The Raspberry Pi system monitors devices connected via relays and displays updates

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    54 views2 pages

    Bench Marking For Smart Controls

    Uploaded by

    Venu Gopal Kalakota
    1. The document discusses four different home automation systems: a Bluetooth system, a DTMF phone-based system, an Arduino-based system, and a Raspberry Pi internet-of-things system. 2. The Bluetooth system uses an ATmega8 microcontroller and Bluetooth to control appliances from an Android phone within a small coverage area. The DTMF system uses a phone's keypad tones decoded by an MT8890 chip to control devices via a limited number of combinations. 3. The Arduino-based system uses PIR and motion sensors along with one-time passwords for security but can struggle with processing many connected devices. The Raspberry Pi system monitors devices connected via relays and displays updates

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 2

    BENCH MARKING FOR

    SMART CONTROLS
    1.Remote control Home Automation System 2. DTMF based Home Automation System:
    using Bluetooth: DTMF is an abbreviation for Dual Tone Multiple
    Bluetooth technology is used widely across the Frequency technology which focuses on the keypad
    globe because of its secure and reliable data usage of a phone for data communication. It creates
    transmission technique Bluetooth uses a short- a signal on pressing a key on a keypad. Two or
    range ratio to transmit data over a speed of up to more frequency is mixed [4] and the tone we get is
    2.4GHz. Projects main focus is to control home called Dual tone. A cell phone is connected using
    appliances using Bluetooth. An AVR ATMEGA8 aux wire to a DTMF decoder MT8890 IC. Every
    microcontroller is used for handling the process key creates and output of 4 digit and a table is
    which is of 28 pin architecture. The Advantage of prepared. Based on table different home appliances
    using Bluetooth is it is fast reliable cheap and easy are controlled . Components used in this project is
    to use and handle and has low energy consumption as follows:
    rate. The components used in this project are as MT8870 DTMF Decoder one unit.
    follows: Relay 5 volt three units.
    ATmega8 micro-controller 1 unit. Bulb with holder or LED three units.
    ULN2803 1 unit. Bread board two units.
    SPDT 5v Relay 3 units. Aux Wire one unit.
    V-Reg 7805 & LM317 1 unit each. 330K resistor one unit.
    22 pF cap two units.
    Terminal blocks 6 units.
    Mobile phone one unit.
    Breadboard 1unit. LEDs three units.
    5v Regulated Power Supply 1unit. This system also has drawback that only limited
    HC-05 Bluetooth module 1 unit. number of devices can be connected to the system
    as there are only 12 combinations used in a dial pad
    Resistors, capacitors, diodes, etc. for making the digital tone. We cannot access this
    16MHz crystal oscillator 1 unit. technology from the outside of the coverage area as
    Some wires and jumper wires. that of Bluetooth based home automation.
    An Android phone with BluControl v1.0
    or above installed on it.
    This system has two major drawbacks firstly if the
    phone doesnt have Bluetooth the user cannot
    access the network and secondly the Bluetooth has
    small range of coverage area so it makes the user
    bounded and cannot be used outside the coverage
    area.

    TEAM-1
    3.Home Automation System using Arduino or 4.Raspberry Pi Based Home Automation System
    Micro-controller: using internet of things:
    To control the heavy data communication, we need This projects main focus is for security, to monitor
    to have a base i.e. microprocessor or a and can get the data using raspberry pi sensors.
    microcontroller which can handle or control the Raspberry pi plays a role to handle the execution of
    data processing of the project. This system uses the code and to process it. The Raspberry pi here is
    Arduino which is a microcontroller for controlling connected to internet via a Modulator Demodulator
    various data handling of home automation. This (MODEM) to handle or access various controls by
    system makes use of PIR sensors motion sensors the customer. The device (home appliances) to
    for detecting the objects around us with the help of control has been integrated with the circuit using a
    heat radiation. This system also makes use of OTP Relay channel due to high voltage ratings of home
    (One Time Password) that can be used as an entry appliances. To view the updates this project make
    password for the users. use of display connected to the Raspberry pi.
    The data which is been send is processed with the
    help of Arduino. As all the system has its
    drawbacks this too lags in processing heavy data
    when multiple devices are connected together

    TEAM-1

    You might also like