HF / V Uhf All Mode Transceiver

Download as pdf or txt
Download as pdf or txt
You are on page 1of 4

HF / V UHF ALL MODE TRANSCEIVER

FT-847
Enjoy the full spectrum of Amateur Radio excitement
with the FT-847 Earth Station!
Ready for action on SSB, CW, HSCW, AM, FM, Packet, SSTV, and RTTY, the FT-847 expands your operating
horizon beyond HF to the 6-meter, 2-meter, and 70-centimeter bands, featuring DSP and full-duplex satellite
operation, all within a super-compact package!

The FT-847 Earth Station: A masterpiece of high-tech design


and operating know-how!
Leading-Edge Advanced Digital Signal Optional Collins SSB/CW
ReceiverDesign! Processing (DSP) System! Mechanical Filters!
Providing performance optimized on The Yaesu engineering team has crafted an outstanding Renowned for their excellent frequency
each operating band, the FT-847s high-performance DSP system for the FT-847, providing significant response and fidelity, Collins
enhancements to receiver performance. The DSP Mechanical Filters in 2.5 kHz and
receiver section carefully blends excellent sensitivity, Bandpass filter provides independently-adjustable 500 Hz (-6 dB) bandwidths are available
low noise, and outstanding strong-signal-handling Low- and High-Cut filter elements, ideal for reducing for the FT-847 (separate TX and RX
capability. The front end s low-noise-figure QRM on SSB, while the CW Bandpass Filter provides SSB filter slots available). The Collins
preamplifier (HEMT device on 70 cm!) is followed fixed selectivity selections of 400 Hz, 200 Hz, 100 Hz, SSB filter provides a very "flat"
by a quad-FET first mixer, providing outstanding and even 25 Hz, ideal for EME and other weak-signal passband response which faithfully
work. The DSP Noise Reduction circuit provides 16 reproduces both voice and data signals.
rejection of Intermodulation. different noise-reduction algorithms, for enhancement The Collins CW filter is ideal for CW
The net result of the FT-847s advanced design of signal-to-noise ratio. And the Automatic Notch Filter or RTTY work, with Wide/Narrow
is a receiver with wide frequency coverage, yet easily will seek out and null unwanted carrier signals, with selection available from the front panel.
capable of hearing minimal distortion
SSB Digital Bandpass Filter Response of desired voice Digital Noise Reduction Filter Characteristics Auto-Notch Filter
moonbounce (EME) waveforms.
signals with a
single Yagi DNR ON
DNR OFF
NOTCH ON
NOTCH OFF

and no external
preamplifier!

0.0 2.0 3.6 95.0 FREQUENCY Hz 3.0k 95.0 FREQUENCY Hz 3.0k


FREQUENCY Hz
The FT-847 Earth Station: The All-in-One Solution to Your Operating Needs!
The FT-847s compact size and wide frequency coverage make it ideal for serious base station use, as well as a variety of
portable and mobile applications, including Field Day, DX-peditions, VHF/UHF Rover operations, and RV installations.

Unmatched Satellite Operation Capability! High-Reliability Transmitter Design! COMPATIBILITY WITH ATAS-120
AUTO-TUNE ANTENNA:
The FT-847 provides 12 "Satellite" VFOs, automatically Utilizing carefully specified and selected bipolar The patented ATAS-120 (Active-Tuning Antenna System)
configured for crossband full duplex (simultaneous power transistors, the FT-847s rugged transmitter provides automatic resonating
TX and RX) operation, with "Normal" and "Inverted" takes advantage of the low noise characteristics of adjustments when used with the
VFO tracking so you can tune across a satellite the DDS (Direct Digital Synthesizer) local oscillator FT-847, utilizing a control voltage
transponder downlink without having to make circuitry to produce a reliable, clean transmitted fed to the ATAS-120 from the
manual uplink frequency adjustments. signal. Power output is 100 Watts on HF and 6 meters, antenna jack of the FT-847. No
The FT-847 is ready for operation on Mode A and 50 Watts on 2 meters and 70 cm. Twin cooling other "antenna tuner" or control
(TX:145 MHz, RX:29 MHz), Mode B fans ensure efficient dissipation of heat, ensuring cable is required! The ATAS-120 may
(TX:435 MHz,RX:145 MHz), Mode J reliable operation on digital modes or during contests. be used on the 7/14/21/28/50/144/430
(TX:145 MHz, RX: 435 MHz), and HF/50 MHz 144/430 MHz MHz bands, and it is compatible
Mode T: (TX:21 MHz, RX:145 MHz). with many common mobile mounts,
Independent display of both uplink which are available from your
Motor Drive Auto-Tuning
and downlink Yaesu dealer. Coaxial cable is Antenna System
not included. ATAS-120
frequencies is provided,
and each satellite VFO
may be labeled with an Superb Ergonomics for Efficient Operation
Alpha-numeric name,
SHUTTLE-JOG TUNING ENHANCEMENT
The SHUTTLE-JOG tuning ring provides rapid
frequency change for quick sweeping of a band.
Just lean the rig slightly to the left or right to begin
Innovative Receiver Features Enhance manual scanning to lower or high frequencies,
respectively. The separate Sub-VFO tuning knob
Your Operating Experience! may be used as a Clarifier ( R.I.T. ) control, or
EXPANDED RECEIVE FREQUENCY RANGE: for initial setup of the uplink/ downlink relationship
37-76, 108-174, and 420-512 MHz. So you can check during satellite operation.
propagation below 6 meters, monitor the 4-meter
band, download images from weather satellites, or
follow the action on public safety frequencies!
IF SHIFT:
For adjustment of IF passband to avoid interference.
IF NOISE BLANKER:
For reduction of automotive ignition noise.
INPUT RF ATTENUATOR:
For more comfortable reception of extremely strong HIGH-CONTRAST MULTI-FUNCTION DISPLAY
signals. The large (7.9" x .79") blue LCD provides high
resolution and contrast for easy viewing over a wide
FIXED-LEVEL AF OUT JACK: range of angles and light levels. Dozens of status
For connection to tape recorder, WeatherFax decoder,
sound card, etc. Leading-Edge Features for indicators keep you informed of every aspect of
your FT-847s operational characteristics.
Todays Active Amateur!
CW OPERATING FLEXIBILITY:
Besides the ultra-narrow DSP filtering for weak signal
work, the FT-847 includes a built-in iambic keyer OPTIONAL VOICE FREQUENCY
with weight control, and either USB or LSB-side ANNOUNCEMENT MODULE (FVS-1A)
injection may be used for CW reception, thanks to For operators with impaired vision, the FT-847 includes
the "CW Reverse" feature. And the ultrafine tuning provision for the optional FVS-1A Voice Synthesizer,
steps as small as 0.1 Hz provide a tuning "feel" as which gives you an audible announcement of the
smooth as that of an analog VFO! current operating frequency (with resolution to the
SSB EXCELLENCE: nearest 100 Hz step).
The FT-847s "talk power" is enhanced by the built-in
RF clipping type Speech Processor, which increases Popular Memory and Scanning Features
average SSB output by approximately 6 dB. And the The FT-847 provides 78 regular memories, plus
transmitted IF passband frequency may be adjusted, upper/lower band scanning limit memories, a CALL
via Menu, to match or enhance the frequency channel, and a HOME channel on each band. A two-
characteristics of your voice pattern. channel Quick Memory Bank (QMB) allows instant
EASY DATA-MODE OPERATION: recall of urgently-needed frequencies, and twelve
Convenient interface jacks are provided for interfacing special Satellite VFO memories with 8-character
to TNCs, sound cards, or other modem devices. Alpha-Numeric labels allow you to note the satellite
For SSB-based data modes, the three-pin DATA name or transponder mode (e.g. AO10B ).
IN/OUT jack supports AFSK input and output, plus Versatile scanning capabilities of the FT-847 include
PTT control. And for 1200/9600 bps packet work, band scanning, memory channel scanning, Priority
the PKT jack provides optimized input and output Channel scanning, and SMART SEARCH, whereby
lines, plus PTT and squelch status lines. the transceiver will sweep the band, automatically
loading a special memory bank with up to 20
OUTSTANDING FM FEATURES AND frequencies where activity is encountered.
FLEXIBILITY:
Included are independently programmable repeater
shifts for 29, 50, 144, and 430 MHz, Automatic
Repeater Shift (ARS) on 144/430 MHz, FM Wide/
Narrow modes for 29 MHz or crowded VHF/UHF
environments, built-in CTCSS/DCS Encoder/Decoder
circuits, and a Discriminator Center Meter, for precise
tuning on Doppler shifted FM satellite signals.
SPECIFICATIONS
General 3rd-Order IMD: At least 31 dB down (14 MHz, 100 W PEP output)
Frequency Range : Receive 100 kHz ~ 30 MHz Slightly higher on 430 MHz
36 ~ 76 MHz SSB Frequency Response : 400 Hz ~ 2600 Hz (6 dB)
108 ~ 174 MHz Max. Occupied Bandwidth : SSB : Less than 3 kHz
420 ~ 512 MHz CW : Less thsn 0.5 kHz
Transmit 160 ~10 Meters FM : Less thsn 16 kHz
2 Meters Microphone Impedance: 200 ~ 10 k (Supplied microphone : 600)
70 Centimeters (Amateur bands only)
5.1675 MHz (USA only) Receiver
Emission Modes : USB, LSB, CW, AM, FM Sensitivity : SSB/CW AM-N FM
F1 (9600 bps Packet), F2 (1200 bps Packet), AFSK 500 kHz ~ 1.8 MHz 20 V
Synthesizer Steps (Min.) : 0.1 Hz (CW/SSB) 1.8 ~ 28 MHz 0.25 V 2 V
10 Hz (AM//FM) 28 ~ 30 MHz 0.25 V 2 V 0.5 V
Antenna Impedance : 50, Unbalanced 50 ~ 54 MHz 0.20 V 1 V 0.25 V
Operating Temp. Range: 14 F ~ 122 F (10 C ~ +50 C) 144/430 MHz 0.125 V 0.2 V
Frequency Stability : Better than 2 ppm (0 C ~ +40 C) SSB/CW/AM/AFSK (Above specifications are worst-case, SSB/CW/AM-N figures
Better than 5 ppm (10 C ~ +50 C) SSB/CW/AM/AFSK are for 10 dB S/N, 12 dB SINAD,on FM)
Better than 5 ppm (< 1 kHz) FM
Power Requirements : DC 13.8 V10 %, Negative Ground Squelch Sensitivity : SSB/CW/AM FM
Current Consumption : Receive (Squetched) : 1.5 A 500 kHz ~ 1.8 MHz 20 V
Receive (Max. Audio) : 2.0 A 1.8 ~ 28 MHz 2 V
Transmit : 22 A (@100 W RF output)
28 ~ 30 MHz 2 V 0.25 V
Case Size (WHD) : 10.24" x 3.39" x 10.63" (260 x 86 x 270 mm)
50 ~ 54 MHz 1 V 0.20 V
Weight (approx.) : 14.4 lbs. (7 kg)
144/430 MHz 0.5 V 0.16 V
Transmitter Image Rejection : better than 60 dB
Power Output : 160 ~ 6 m : 100 Watts (25 Watts AM carrier) IF Rejection : better than 60 dB
2 m/70 cm : 50 Watts (12.5 Watts AM carrier), Selectivity (6/60 dB) :
SSB/CW : 2.2 kHz/4.5 kHz
Modulation Types : SSB: Balanced Modulation CW-N : 0.5 kHz/2.0 kHz (Optional YF-116C installed)
FM: Variable Reactance AM : 9 kHz/20 kHz
AM: Early Stage (Low-Level) AM-N : 2.2 kHz/4.5 kHz
FM Maximum Deviation : 5 kHz ( 2.5 kHz on FM-N) FM : 15 kHz/30 kHz
Spurious Radiation : Harmonics : At least 40 dB down (1.8 ~ 29.7 MHz) FM-N : 9 kHz/20 kHz
At least 60 dB down (50/144/430 MHz) Audio Output: At least 1.5 W into 8 @ 10 % THD
Non-harmonic : At least 50 dB down (1.8 ~ 29.7 MHz) Audio Output Impedance: 4 ~ 16
At least 60 dB down (50/144/430 MHz)
Carrier Suppression: At least 40 dB Specifications are subject to change, in the interest of technical improvement, without
Opp. Sideband Suppression: At least 40 dB notice or obligation.

OPTIONAL ACCESSORIES

MH-31B8
MD-200A8X Hand Microphone YH-77STA YF-115C YF-115S-02
Ultra-High-Fidelity MD-100A8X MH-36D8 Lightweight Stereo FVS-1A 455 Hz Collins 2.5 kHz Collins MMB-66
Desktop Microphone Desktop Microphone DTMF Hand Microphone Headphone Voice Synthesizer Unit Mechanical CW Filter Mechanical SSB Filter Mobile Mounting Bracket

SPECIFICATIONS
Frequency Range: 7/14/21/28/50/144/430 MHz
Amateur Bands
Height(Approx.): 1.4~1.6 meters(4.59~5.24 feet)
Weight(Approx.): 900 g (1.98 lbs.)
FC-20 Input Impedance: 50
Automatic Antenna Tuner Maximum Input Power: 120 W(A3J)
Matched SWR: Less than 2.0 : 1
SPECIFICATIONS (with proper counterpoise)
Impedance Matching Range: 16.5 ~ 150 ATAS-120
25 ~ 100 (50 MHz) Motor Drive Auto-Tuning
FP-1023 G-5500 Input Impedance: 50 Antenna System
Maximum Input Power: 100 W PEP
Compact Switching FP-1030A Azimuth/Elevation Rotator G-550 Matched SWR: 1.5 : 1 or lower ATBK-100
Power Supply (USA only) Base Station Power Supply System Elevation Rotator Matching time: <30 seconds Antenna Base Kit for ATAS-120
About this brochure: we have made this brochure as comprehensive and factual as possible. We reserve the right, however, to make changes at any time in equipment, optional accessories,
specifications, model numbers, and availability. Some accessories shown herein may not be available in some countries. Some information may have been updated since the time of printing;
please check with your Authorized Yaesu Dealer for complete details.

http://www.vxstdusa.com
VERTEX STANDARD CO., LTD. VERTEX STANDARD Email: [email protected]
4-8-8 Nakameguro, Meguro-ku, Tokyo 153-8644, Japan US Headquarters Phone 714/827-7600; Fax 714/827-8100
10900 Walker Street, Cypress, CA 90630, U.S.A.
For the latest Yaesu news,visit us on the Internet:
http://www.vxstd.com YAESU EUROPE B.V.
P.O. Box 75525, 1118 ZN Schiphol, The Netherlands
http://www.yaesu.co.uk
YAESU UK LTD. Email: [email protected]
Unit 12, Sun Valley Business Park, Winnall Close
Winchester, Hampshire, SO23 0LB, U.K.

VERTEX STANDARD HK LTD. http://www.vxstd.com.hk


Unit 5, 20 /F., Seaview Centre, 139-141 Hoi Bun Road,
2003.0910NA(U/E) B9200227C Printed in Japan Kwun Tong, Kowloon, Hong Kong

You might also like