Scheme 1369551

1 Room temperature and climate control / Hydronic balancing at the radiator
Thermostats, radiator fittings, actuators, controllers
Surface heating and cooling "Cofloor"

2 Systems, "Copipe", "Copex" and "Copert" pipes, "Unidis", "Unibox", distributors/collectors, valves,
controls, accessories
Hydronic balancing in heating and cooling systems

Double regulating and commissioning valves and isolating and orifice valves ("Hycocon", "Hydrocontrol"), differential pressure and flow
3
regulators ("Hydromat"), pressure independent control valves for automatic hydroncing balancing ("Cocon"), connection and measuring systems
5 Isolating and other pipe fittings

Valves, ball valves, gate valves, strainers, check valves
Stations for heating, cooling, potable water for dwellings/buildings

6 Stations for the connection of heat generators to the heating heating circuit ("Regumat"), dwelling stations ("Regudis W"), fresh water stations
("Regumaq"), cooling stations ("Regumaq WK")
7 Local and district heating technology

Stations ("Regudis H"), valves and accessories
Potable water technology "Aquanova-System"

8 Isolating valves, valves for static or automatic thermal regulation, filters, distribution and flushing systems for the efficient operation of hygienic
potable water installations
9 Solar thermal energy

Stations "Regusol", collectors "OKP" / "OKF", systems "Solcos", valves and accessories
10 Storage cylinders
Storage cylinders ("Hydrocor"), energy storage centres ("Regucor"), "power to heat"
11 Connection system "Combi-System"

"Cofit" fittings, "Copipe", "Copex" and "Copert" pipes, accessories
12 Smart Home, centralised building control systems and other electronic controls
Smart Home "DynaTemp HA", centralised building control systems "DynaTemp BA", gateway "Synet", actuators, valves and accessories
14 Heating oil technology

Filters, deaerators, tank equipment and fittings
Different system applications

17 Application for air conditioning, heat pumps, geothermics, combined heat and power (CHP),
photovoltaics/Smart Grid, district heating/biomass systems, solar cooling, large solar plants
19 Service
Software, data (Datanorm, ARGE Neue Medien, BIM, ETIM), measuring gauges, service, seminars, reference books
IX General information
20
Indices, Standard Terms and Conditions, Imprint
Content
Page
1 Room temperature and climate control / Hydronic balancing at the radiator

Content 1.01
1.a Thermostats 1.08
1.b Room thermostats 1.20
1.c Actuators 1.26
1.d "i-Tronic" Climate display device 1.32
1.e "R-Tronic" Climate display device/control 1.34
"Synet CR" Gateway and hydronic balancing
1.f Valves with "Q-Tech" for automatic hydronic balancing 1.42
1.g Valves for manual hydronic balancing 1.50
1.h Valves for large flow rates 1.62
1.i Thermostatic valve sets 1.68
1.j Exclusive radiator valves 1.72
1.k "Multiblock T/ T-RTL" Fittings for radiators with centre connection 1.78
1.l Valve sets, components and accessories for for two pipe heating systems 1.86
1.m Valve sets, components and accessories for one pipe heating systems 1.90
1.n "Unofix" Refurbishment of one pipe heating systems 1.99
1.o Valve inserts for radiators with integrated distributor 1.102
1.p Valve inserts 1.108
1.q Return temperature limiters 1.112
1.r Manual radiator valves 1.116
1.s "Q-Tech" Fittings for automatic hydronic balancing 1.118
1.t Fittings for radiators with integrated distributor 1.120
1.u Lockshield valves for conventional radiators 1.128
1.v Distributors/collectors 1.132
1.w Conversion fittings/Accessories for radiators 1.136
1.x Connection system 1.140
2 Surface heating and cooling "Cofloor"

Content 2.01
2.a System summary 2.06
2.b "Unidis" Surface heating system with local flow distribution 2.10
2.c "Unibox" Room temperature control with "Q-Tech" 2.18
for automatic hydronic balancing
2.d "Unibox" Room temperature control 2.20
2.e Room thermostats 2.28
2.f Room thermostats with wireless transmitter, wireless receivers 2.33
2.g Actuators 2.38
2.h "Cofloor" Systems, "Copex" Pipes and accessories 2.40
2.i "Multidis Fix" Distributor/collector systems 2.54
2.j "Multidis SFQ" distributor/collector with "Q-Tech" 2.56
2.k "Multidis SF/SFB/SFI" Distributors/collectors 2.58
for surface heating and cooling systems
2.l "Regufloor" Control units 2.68
2.m Single components for distributors/collectors 2.76
2.n Regulating sets for surface heating systems 2.80
2.o Return temperature limiter set 2.84
2.p Components for concrete core activation 2.86
3 Hydronic balancing in heating and cooling systems

Content 3.01
3.b "Hycocon" Control, regulating and isolating valves 3.12
3.c "Hydrocontrol" Regulating and isolating valves 3.26
3.d "Hydromat" Differential pressure and flow regulators 3.36
3.e Accessories for "Hydrocontrol", "Hydromat", "Hycocon" 3.42
3.f "Hycoflow" Double regulating and commissioning valves with flow display 3.50
3.g "Cocon" Regulating valves 3.52
3.h "Optibal W6" Six-way ball valve 3.64
3.i "Flypass" Connection systems, valves and fittings 3.69
3.j "Tri-M", "Tri-D", "Tri-CTR" 3.78
Two-way valves, three-way valves, temperature controllers
3.k "KTB" Thermostatic valves for cooling systems 3.84
3.l Room thermostats, actuators 3.86
3.m "OV-DMC 3", OV-DMC 2" and "OV-DMCP" Measuring systems 3.94
3.n Products for air conditioning and ventilation 3.100
3.o Products for radiant and chilled ceiling systems 3.104
X 2017
Content
Page
3.p Connection system 3.108
5 Isolating and other pipe fittings

Content 5.01
5.a "Optibal" Ball valves 5.04
5.b "Hygate" Gate valves 5.14
5.c Valves PN 16/25 5.18
5.d Butterfly valves 5.22
5.e Piston type spring assisted check valves, 5.26
swing type check valves
5.f Airvents 5.30
5.g Strainers 5.32
5.h Spare parts 5.36
6 Stations for heating, cooling, potable water for dwellings/buildings

Content 6.01
6.a "Regumat 130/180" DN 20/25/32 6.06
6.b "Regumat 220/280" DN 40/50 6.34
6.c "Regumat F/FR" Stations for thermally controlled surface heating systems 6.40
6.d "Regumat RTA" Stations for solid fuel boilers for return temperature increase 6.50
6.e Products for heat pump systems 6.54
6.f "Regumat S/M3-180" DN 25 for heat meters 6.58
6.g Accessories for "Regumat" 6.62
6.h "Regudis W" Dwelling stations 6.79
6.i "Regumaq X/XZ/XH/K" Stations for hot potable water preparation 6.100
6.j "Regudis WK" Cooling stations 6.116
6.k Further associated products 6.118
7 Local and district heating technology

Content 7.01
7.a Local and district heating technology 7.08
8 Potable water technology "Aquanova-System"

Content 8.01
8.b "Aquastrom F"/"Aquastrom KFR" valves 8.10
8.c "Aquastrom FR" and "Aquastrom R" valves 8.22
8.d "Optibal TW" Ball valves for potable water 8.24
8.e "Aquastrom VT/T plus" Thermal circulation valves 8.28
8.f "Aquastrom C" Regulating valves, "Aquastrom P" Water sampling valves 8.32
8.g "Aquastrom UP" Flush-mounted valves 8.36
8.h "Aquastrom K" Thermostatic cold water circulation valve 8.46
8.i "Brawa-Mix" Thermostatic mixing valves 8.48
8.j "Regucirc" Circulation stations 8.52
8.k "Regudrain" Flushing station 8.56
8.l "Aquamodul" Distributor system for potable water 8.61
8.m "Ofix" Connection fittings 8.66
8.n Domestic water station/Heating system filling station 8.68
8.o "Aquanova" Water filters 8.70
8.p Valves for water softening 8.74
8.q Connection system 8.78
8.r Stations for hot potable water preparation/Other products for water installations 8.80
9 Solar thermal energy

Content 9.01
9.a "Regusol" stations and "Regtronic" controllers for solar thermal energy 9.07
9.b Accessories for "Regusol" stations within the collector circuit 9.30
9.c "OKP" and "OKF" Collectors and accessories 9.40
9.d "Solcos" Solar packages 9.52
9.e "Solar" Diaphragm expansion tanks for solar thermal energy 9.56
9.f Pipes and connection fittings 9.58
9.g Valves, temperature controllers, actuators and other accessories 9.62
for application outside the collector circuit
9.h Further accessories 9.70
2017 XI
Content
Page
10 Storage cylinders
Content 10.01
10.a "Regucor WHS" Energy storage centres 10.06
10.b "Regucor WHP" Energy storage centre ("Power to heat") 10.15
10.c "Hydrocor" Storage cylinders 10.18
11 Connection system "Combi-System"

Content 11.01
11.a "Copipe", "Copex" and "Copert" pipes 11.06
11.b "Cofit P" Press connection system (bronze) 11.12
11.c "Cofit PD" Press connection system 11.22
(bronze, pressing must be carried out to tighten the connection)
11.d "Cofit PDK" Press connection system 11.30
(plastic, pressing must be carried out to tighten the connection)
11.e "Cofit S" Screwed connection system 11.32
11.f Fixing material and accessories for pipes 11.38
11.g Tools 11.40
11.h "Copex HT" PE-Xc Plastic pipe 11.46
11.i "Cofit PD-HT" Press connection system 11.48
12 Smart Home, centralised building control systems and other electronic controls
Content 12.01
12.a "DynaTemp" Home and Building automation 12.06
12.b "DynaTemp HA" Home Automation 12.11
12.c "DynaTemp BA" Building Automation 12.20
12.d "DynaTemp BA" Building Automation 12.25
Local individual room temperature control via bus system "CR-BS"
12.e "DynaTemp BA" Building Automation 12.31
Central individual room temperature control via bus system "CR-BX"
12.f "DynaTemp BA" Building Automation 12.37
Automatic thermal balancing and thermal disinfection in potable water circulation systems "CW-
BS"
12.g "DynaTemp BA" Building Automation 12.41
Network of stations for heat generator/heating circuit
and solar thermal energy "CS-BS"
12.h Actuators, sensors, valves and fittings 12.50
14 Heating oil technology

Content 14.01
14.a General information 14.04
14.b Deaerators, filters 14.08
14.c Tank equipment 14.20
14.d Heating oil valves in the pipework 14.34
14.e Fittings 14.41
14.f Heating oil kits for export 14.48
17 Different system applications

Content 17.01
17.a Different system applications 17.04
19 Service
Content 19.01
19.a Software, article data, data sets 19.04
19.b Measuring gauges 19.06
19.c Service 19.08
20 General information
Content 20.01
20.a Indices 20.04
20.b General conditions 20.52
20.c Imprint 20.54
XII 2017
Room temperature and climate
control / Hydronic balancing at
1
the radiator Content
Page
1.a Thermostats
Content 1.07
Thermostat "Uni XH" (M 30 x 1.5) 1.08
Thermostat "Uni XHM" (M 30 x 1.5) 1.08
Thermostat "Uni XHT" (M 30 x 1.5) 1.08
Thermostat "Uni LH" (M 30 x 1.5) 1.09
Thermostat "Uni LGH" (M 30 x 1.5) 1.09
Thermostat "Uni LHB" (M 30 x 1.5) 1.10
Thermostat "Uni SH" (M 30 x 1.5) 1.10
Thermostat "pinox H" (M 30 x 1.5) 1.11
Thermostat "vindo TH" (M 30 x 1.5) 1.11
Thermostat "Uni CH" (M 30 x 1.5) 1.11
Thermostat with remote control "Uni FH" (M 30 x 1.5) 1.12
Thermostat "Uni XD" (squeeze connection) 1.13
Thermostat "Uni LD" (squeeze connection) 1.13
Thermostat "pinox D" (squeeze connection) 1.14
Thermostat "vindo TD" (squeeze connection) 1.14
Thermostat "vindo RTD" 1.14
Thermostat with remote control "Uni FD" (squeeze connection) 1.15
Thermostat "Uni LDV" (squeeze connection) 1.15
Thermostat "Uni LDVL" (squeeze connection) 1.15
Thermostat "Uni L" M 30 x 1.0 1.16
Special thermostats 1.16
Accessories for thermostats 1.17
Manual heads 1.18
1.b Room thermostats

Content 1.19
Room thermostats (heating) 1.20
Room thermostats (heating/cooling) 1.21
Room thermostats (heating/cooling) with fan drive 1.22
1.c Actuators
Content 1.23
Combination possibilities of valves and actuators 1.24
"Aktor T" Electrothermal actuators 1.26
"Aktor M" Electromotive actuators 1.28
"Aktor M ST EIB" Electromotive actuators 1.29
"Aktor M ST LON" Electromotive actuators 1.29
"Aktor MH CON B" (ENOCEAN) Wireless actuator 1.29
2017 1.01
1 control / Hydronic balancing at
Page
1.d "i-Tronic" Climate display device

Content 1.31
"i-Tronic TFC" 1.32
1.e "R-Tronic" Climate display device/control

Content 1.33
"R-Tronic RT B" Wireless thermostat 1.34
"R-Tronic RTF B" Wireless thermostat with humidity display 1.35
"R-Tronic RTFC K" Wireless thermostat with humidity and CO2 display 1.35
"Aktor MH CON B" Wireless actuator (M 30 x 1.5) 1.36

"Aktor MD CON B" Wireless actuator (squeeze connection) 1.36
Accessories 1.37
"FK-C F" Wireless window contact 1.37
"RP-S F" Wireless repeater 1.37
"R-Con 2P" Wireless receiver (1 channel) 1.37
Automatic presetting with "Synet CR" 1.38
and automatic hydronic balancing with "Q-Tech"
"Synet CR" Gateway 1.38
1.f Valves with "Q-Tech" for automatic hydronic balancing

Content 1.41
Thermostatic valves "AQ" 1.42
Thermostatic valves "RFQ" 1.42
Thermostatic valves "AQF" 1.43
Exclusive radiator valves "EQ" 1.44
"Multiblock TQ" Two pipe fitting 1.45
"Multiblock TQ-RTL" 1.46
"Demo-Bloc" 1.47
1.g Valves for manual hydronic balancing

Content 1.49
Thermostatic valves "AV 9" 1.50
Thermostatic valves "AV 9" (press connection) 1.50
Thermostatic valves "AV 9" (male thread) 1.51
Thermostatic valves "CV 9" 1.52
Thermostatic valves "AF" 1.53
Accessories 1.55
Thermostatic valves "ADV 9" 1.56
Thermostatic valves "RFV 9" 1.57
"Uniset" Radiator valve sets 1.59
Radiator lockshield valve "Combi 3G" 1.59
"Demo-Bloc" 1.60
1.02 2017
1
Page
1.h Valves for large flow rates

Content 1.61
Thermostatic valves "A" 1.62
Thermostatic valves "A" (male thread) 1.63
Thermostatic valves "AZ V" 1.64
Thermostatic valves "AZ H" 1.64
Thermostatic valves "RF" 1.65
1.i Thermostatic valve sets

Content 1.67
Thermostatic valve sets with thermostat "vindo TH" 1.68
Thermostatic valve sets with thermostat "Uni LH" 1.69
Connection sets "Multiflex F" with thermostat "vindo TH" 1.69
1.j Exclusive radiator valves

Content 1.71
Thermostatic valves "E" 1.72
Design handgrips 1.73
Radiator lockshield valves "Combi E" 1.74
Sets of compression fittings (1-fold) 1.74
T-pieces 1.74
Wall connection sets (1-fold) 1.74
Thermostatic valve sets "E" 1.75
1.k "Multiblock T/ T-RTL" Fittings for radiators with centre connection

Content 1.77
"Multiblock T" Two pipe fitting 1.78
"Multiblock TU" One/two pipe fitting convertible 1.78
Design covers 1.79
Connection sets "Multiblock T"/"Uni SH" for towel radiators 1.80
(radiators with Rp female thread)
Connection sets "Multiblock T"/"pinox H" for towel radiators 1.80
"Multiblock TFU" One/two pipe fitting convertible 1.81
Connection sets "Multiblock TFU"/"Uni SH" for towel radiators 1.81
"Multiblock T-RTL" 1.82
Connection sets "Multiblock T-RTL"/"Uni SH" 1.83
Connection sets "Multiblock T-RTL"/"pinox H" 1.83
1.l Valve sets, components and accessories for for two pipe heating systems
OV 2 Content 1.85
"Bypass-Combi Duo" two pipe with shut off 1.86
"Duo" Two pipe connection piece with shut off 1.86
Connection pieces 1.86
"Duo" Two pipe connection piece without shut off 1.87
Two pipe radiator valve with insertion tube with shut off 1.87
Valve for "TKM" system 1.87
2017 1.03
Page
Angle pattern fitting 1.87
1.m Valve sets, components and accessories for one pipe heating systems
Content 1.89
"Bypass-Combi Uno" one pipe 1.90
"Uno" One pipe connection piece 1.90
"Uno" One pipe connection piece M 24 x 1.5 1.91
"Ofix" Compression fittings M 24 x 1.5 1.91
"Cofit S" Compression fittings M 24 x 1.5 1.91
Plastic rosette cover 1.91
Radiator valve with insertion tube with fixed bypass and shut off 1.92
Three-way conversion valves 1.93
Accessories 1.93
Isolation fittings 1.94
S-connection fitting, flat sealing 1.95
Tailpipe sets 1.95
1.n "Unofix" Refurbishment of one pipe heating systems

Content 1.97
System illustrations 1.98
"Cocon QTZ" Pressure independent control valves PN 16 1.99
Accessories 1.100
1.o Valve inserts for radiators with integrated distributor

Content 1.101
Valves inserts with "Q-Tech" 1.102
Valve inserts (M 30 x 1.5) 1.104
Valve inserts (squeeze connection) 1.106
1.p Valve inserts

Content 1.107
Valve inserts for valves with connection thread M 30 x 1.5 1.108
(for valves manufactured up to 1998)
1.q Return temperature limiters

Content 1.111
Return temperature limiter valves for thermostat "Uni RTLH" 1.112
Thermostat "Uni RTLH" 1.112
Thermostat "Uni RTL" 1.112
Valve inserts 1.112
Extension 1.112
Gland nut 1.112
1.04 2017
1
Page
Return temperature limiter sets 1.113
1.r Manual radiator valves

Content 1.115
Manual radiator valves "HRV" 1.116
Manual radiator valves "HR" 1.116
1.s "Q-Tech" Fittings for automatic hydronic balancing

Content 1.117
"Multiflex FQ" Fittings for G female thread 1.118
"Multiflex FQ" Fittings for G male thread 1.118
1.t Fittings for radiators with integrated distributor

Content 1.119
"Multiflex F" Fittings for G female thread 1.120
"Multiflex F" Fittings for G male thread 1.121
"Multiflex V" Fittings for G female thread 1.122
"Multiflex V" Fittings for G male thread 1.123
Radiator connection 1.124
Inversion fittings 1.124
Connection fittings 1.125
Plastic rosette cover, white 1.125
1.u Lockshield valves for conventional radiators

Content 1.127
"Combi 4" 1.128
"Combi C" 1.128
"Combi 3" 1.129
"Combi 2" 1.130
"Combi LR" 1.130
1.v Distributors/collectors
Content 1.131
"Multidis SH" Stainless steel distributor/collector 1.132
Ball valves 1.132
Flush-mounted cabinets 1.133
Ring spanner 1.133
Floor distributor/collector 1.133
1.w Conversion fittings/Accessories for radiators

Content 1.135
Conversion fittings 1.136
Strainer inserts 1.137
Accessories for radiators 1.138
2017 1.05
Page
1.x Connection system

Content 1.139
"Ofix" Compression fittings 1.140
"Ofix" Compression fittings (2-fold) 1.142
"Cofit S" Compression fittings 1.143
Summary 1.144
Installation examples 1.145
"Ofix" for the connection of standard pipes to Oventrop valves and controls 1.146
Brass reinforcing sleeves 1.143
1.06 2017
1
the radiator 1.a Thermostats
Page
1.a Thermostats
Content
Thermostat "Uni XH" (M 30 x 1.5) 1.08
Thermostat "Uni XHM" (M 30 x 1.5) 1.08
Thermostat "Uni XHT" (M 30 x 1.5) 1.08
Thermostat "Uni LH" (M 30 x 1.5) 1.09
Thermostat "Uni LGH" (M 30 x 1.5) 1.09
Thermostat "Uni LHB" (M 30 x 1.5) 1.10
Thermostat "Uni SH" (M 30 x 1.5) 1.10
Thermostat "pinox H" (M 30 x 1.5) 1.11
Thermostat "vindo TH" (M 30 x 1.5) 1.11
Thermostat "Uni CH" (M 30 x 1.5) 1.11
Thermostat with remote control "Uni FH" (M 30 x 1.5) 1.12
Thermostat "Uni XD" (squeeze connection) 1.13
Thermostat "Uni LD" (squeeze connection) 1.13
Thermostat "pinox D" (squeeze connection) 1.14
Thermostat "vindo TD" (squeeze connection) 1.14
Thermostat "vindo RTD" 1.14
Thermostat with remote control "Uni FD" (squeeze connection) 1.15
Thermostat "Uni LDV" (squeeze connection) 1.15
Thermostat "Uni LDVL" (squeeze connection) 1.15
Thermostat "Uni L" M 30 x 1.0 1.16
Special thermostats 1.16
Accessories for thermostats 1.17
Manual heads 1.18
2017 1.07
1.a Thermostats
Thermostat "Uni XH" (M 30 x 1.5)
Thermostat "Uni XHM" (M 30 x 1.5)
the radiator Thermostat "Uni XHT" (M 30 x 1.5)
Control Packing
Article Article-No. Hint
range unit
Thermostat "Uni XH" (M 30 x 1.5) Temperature setting may be limited or locked

with liquid sensor by using the limiting elements.
marking "Uni XH" on lower side With setting device for visually handicapped
persons.
Marking of a set value by using the memo disk.
Max. heating water temperature: 120 C
white 7-28 C (10) 1011365 with '0' setting

white 7-28 C (10) 1011364 without 0 setting
Awards:
Interclima P aris
Trophe du Design
Industrial Design Forum Hanover
Award iF
Manufacturer: Oventrop
Model: Thermostat Uni XH
Registration number: 10581-20140902
Information: www.tell-online.eu
A Label of EUnited Valves

European Valve Manufacturers Association
white,
with remote sensor
capillary 2 m long 7-28 C 1011565 with '0' setting

capillary 5 m long 7-28 C (10) 1011566
capillary 2 m long 7-28 C (10) 1011582 without '0' setting
Thermostat "Uni XHM" (M 30 x 1.5) In combination with valves, the specific piston
with liquid sensor stroke and thus the kv-value is higher
marking "Uni XHM" on lower side compared to the other Oventrop valves.
with higher specific piston stroke Especially suitable for the valve design with 1K
P-deviation.
Thermostat "Uni XHT" (M 30 x 1.5) Max. heating water temperature: 90 C

with liquid sensor
marking "Uni XHT" on lower side
transparent 7-28 C (10) 1011300 with 0 setting
For further information see

"Technical information":
Thermostat accessories: Pages 1.17, 10.10
1.08 2017
1.a Thermostats 1
Thermostat "Uni LH" (M 30 x 1.5)
the radiator Thermostat "Uni LGH" (M 30 x 1.5)
Control Packing
range unit
Thermostat "Uni LH" (M 30 x 1.5) Temperature setting may be limited or locked

with liquid sensor by using the concealed limiting elements.
marking "Uni LH" on lower side With setting device for visually handicapped
persons. Marking of a set value by using the
memo disk.
white 7-28 C (25) 1011466
without memo disk,
please inquire about customised memo disk
white 7-28 C (10) 1011464 without '0' setting
white 8-38 C (10) 1011488 For indoor swimming pools and health spa.
Busse Design Ulm

Manufacturer:
Model:
Oventrop
Thermostat Uni LH
bd Longlife Design Award

signal grey with 7-28 C (25) 1011461 with '0' setting

collar nut cover
(RAL 7004)
anthracite with 7-28 C (25) 1011467
collar nut cover
(RAL 7016)
gold plated 7-28 C (25) 1011468
with collar nut cover
chrome plated 7-28 C (25) 1011469
white,
with remote sensor

For indoor swimming pools and health spa.

Thermostat "Uni LGH" (M 30 x 1.5)

with liquid sensor
white (100) 1018561
2017 to be discontinued 1.09

1.a Thermostats
Thermostat "Uni LHB" (M 30 x 1.5)
the radiator Thermostat "Uni SH" (M 30 x 1.5)
Control Packing
range unit
Thermostat "Uni LHB" (M 30 x 1.5) Lockshield configuration, lockable, with

with liquid sensor integrated anti-theft device and increased
marking "Uni LHB" underneath flectional strength.
the memo disk Max. heating water temperature: 120 C
Award:
universal
design
universal design award
For nominal temperature setting at the

Setting key 1011497 thermostat.
for thermostat "Uni LHB"
Thermostat "Uni SH" (M 30 x 1.5) With setting device for visually handicapped
with liquid sensor persons.
marking "Uni SH" on lower side Max. heating water temperature: 120 C
white/chrome plated 7-28 C (10) 1012065 with '0' setting

white 7-28 C (10) 1012066
chrome plated 7-28 C (10) 1012069 With mounted design cover "SH-Cap"
stainless steel finish 7-28 C (10) 1012085 With mounted design cover "SH-Cap"
"SH-Cap" Design covers Awards:

International Design Award
anthracite (RAL 7016) (25) 1012080
Baden-Wrttemberg
chrome plated (25) 1012081
white (25) 1012082 ISH Frankfurt
Design Award of the
Federal Republic of Germany
Model:
Registration number:
Thermostat Uni SH
10534-20140611
Nominated
Good Design Award Japan
universal
design
The Chicago Athenaeum:
Museum of Architecture and Design
Information: www.tell-online.eu GOOD DESIGN Award
"Uni SH" in combination with
"Multiblock T" in stainless steel finish:
Design Centre Essen
reddot design award
Design Award of the
Nominated

"Technical information".
1.10 2017
1.a Thermostats
Thermostat "pinox H" (M 30 x 1.5) 1
Thermostat "vindo TH" (M 30 x 1.5)
the radiator Thermostat "Uni CH" (M 30 x 1.5)
Control Packing
range unit
Thermostat "pinox H" (M 30 x 1.5) Single-lever thermostat.

with liquid sensor This thermostat can be fitted to all thermostatic
marking "pinox H" on lower side radiator valves with connection thread
M 30 x 1.5. Design similar to that of single-
lever taps.
chrome plated (12) 1012165 without '0' setting
white (12) 1012166
The thermostat "pinox H" has features which
are protected by patent.
Awards:
Innovation award
Architecture & Technology
ISH Frankfurt 2013
ICONIC AWARDS 2013
German Design Award 2014
Interclima P aris
Trophe du Design
Award iF
ICONIC AWARDS 2016

INTERIOR INNOVATION
Thermostat "vindo TH" (M 30 x 1.5) Temperature setting may be limited or locked

with liquid sensor by using the limiting elements. With setting
device for visually handicapped persons.
white 7-28 C (10) 1013066 with 0 setting
The thermostat "vindo TH" has features which

Model: Thermostat vindo TH
Awards:
German Designer Club
Good Design 08
Design Award of the
Nominated

Thermostat "Uni CH" (M 30 x 1.5) The thermostat "Uni CH" features a moveable
Design collar not cover.
with liquid sensor Max. heating water temperature: 120 C
4 5 oventrop
3 1 2
marking "Uni CH" on lower side
white 7-28 C (10) 1011265 without 0 setting
2017 1.11
1 control / Hydronic balancing at 1.a Thermostats
the radiator Thermostat with remote control "Uni FH" (M 30 x 1.5)
Control
range
Thermostat with remote control "Uni FH" (M 30 x 1.5) Thermostats with remote control and with
remote transmission are especially suitable for
trench heaters, encased radiators and surface
Thermostat with remote control "Uni FH" heating systems.
2
3 4 white Max. heating water temperature: 120 C
5
1
0
capillary 5 m long 7-28 C 1012296
capillary 10 m long 7-28 C 1012297
white,
with additional remote sensor
2
3 4
capillary 5 m long 7-28 C 1012396 For further information see
5
1
0 "Technical information":
The thermostats Uni XH, Uni XHM, Uni XHT, Uni LH, Uni LHB, Uni LHZ, Example of an integrated distributor for
Uni FH, Uni SH, Uni CH, vindo TH and pinox H can be fitted without two pipe heating systems. G 34 male thread,
adapter to the radiators with integrated distributor of the following manufacturers: distance between pipe centres 50 mm.
ACOVA Delta Kampmann

Alarko Demrad Kermi
Arbonia DiaNorm Korado
Baufa Dia-therm Purmo
Baykan Dunaferr Radson
boki DURA Rettig
Bemm Emco Runtal
Borer Heatline Starpan
Bremo Henrad Superia
Brugman HM-Heizkrper Termoteknik
Caradon-Stelrad Hoval US-Steel
Celikpan IMAS Vasco
Csknz Jaga VEHA
Concept Jugotherm Zehnder
DEF Kalor Zenith
(Subject to change without notice)
1.12 2017
1.a Thermostats 1
Thermostat "Uni XD" (squeeze connection)
the radiator Thermostat "Uni LD" (squeeze connection)
Control Packing
range unit
Thermostat "Uni XD" (squeeze connection) These thermostats can be fitted without
with liquid sensor adapter to the integrated distributors and
marking "Uni XD" on lower side thermostatic radiator valves with squeeze
connection of the company Danfoss, series RA.
Squeeze connection with collar nut:
easy installation
close connection
Temperature setting may be limited or locked
by using the limiting elements.
With setting device for visually handicapped
persons.
white,
with remote sensor
capillary 2 m long 7-28 C (10) 1011575 with '0' setting
Thermostat "Uni LD" (squeeze connection) Temperature setting may be limited or locked
with liquid sensor by using the concealed limiting elements.
marking "Uni LD" on lower side With setting device for visually handicapped
persons.
without memo disk,
please inquire about customised memo disk
signal grey with 7-28 C (25) 1011470 with '0' setting

collar nut cover
(RAL 7004)
anthracite with (25) 1011478
collar nut cover
chrome plated with (25) 1011479
collar nut cover
gold plated with (25) 1011480
collar nut cover
white,
with remote sensor


1.a Thermostats
Thermostat "pinox D" (squeeze connection)
Thermostat "vindo TD" (squeeze connection)
the radiator Thermostat "vindo RTD"
Control Packing
range unit
Thermostat "pinox D" (squeeze connection) Single-lever thermostat.

with liquid sensor The thermostat can be fitted without adapter to
marking "pinox D" on lower side the integrated distributors and thermostatic
radiator valves of the company Danfoss, series
RA.
Design similar to that of single-lever taps.

chrome plated (12) 1012175 without '0' setting
white (12) 1012176* The thermostat "pinox D" has features which
Thermostat "vindo TD" (squeeze connection) The thermostat can be fitted without adapter to
with liquid sensor the integrated distributors and thermostatic
radiator valves of the company Danfoss, series
RA.

by using the limiting elements. With setting
device for visually handicapped persons.

white 7-28 C (10) 1013076 with 0 setting
The thermostat "vindo TD" has features which

Awards:
German Designer Club
Good Design 08
Design Award of the
Nominated
Thermostat "vindo RTD"

with liquid sensor
for RTD valves of the company Danfoss
The thermostat can be fitted without adapter to

white (10) 1613066 the thermostatic radiator valves with
connection thread M 30 x 1.5 of the company
Danfoss, series RTD.
Cannot be used with Oventrop valves with
connection thread M 30 x 1.5.
With '0' setting
The thermostat "vindo RTD" has features

which are protected by patent.
1.14 *New in catalogue 2017 2017

1.a Thermostats
Thermostat with remote control "Uni FD" (squeeze connection) 1
Thermostat "Uni LDV" (squeeze connection)
the radiator Thermostat "Uni LDVL" (squeeze connection)
Control Packing
range unit
Thermostat with remote control "Uni FD" (squeeze connection) Max. heating water temperature: 120 C
3 4
2
5
white
1
The thermostats Uni XD, Uni LD, Uni FD, vindo TD Example of an integrated distributor for one
and pinox D can be fitted without adapter to the radiators and two pipe heating systems. G 34 male thread,
with integrated distributor of the following manufacturers: distance between pipe centres 50 mm.
Agis Hudevad
Arbonia Ribe/Rio
Brtje Thor
Brugman Vasco
Buderus Vogel & Noot
De Longhi
(Subject to change without notice)
Fittings for the connection of these radiators

to the pipework: pages 1.120-1.124
and 1.128-1.130.
Thermostat "Uni LDV" (squeeze connection) These thermostats can be fitted without
with liquid sensor adapter to the thermostatic radiator valves with
squeeze connection of the company Danfoss,
series RAV (thermostat connection 34 mm).
white 7-28 C (10) 1616575 by using the concealed limiting elements.
people.
with 0 setting
Thermostat "Uni LDVL" (squeeze connection) These thermostats can be fitted without
with liquid sensor adapter to the thermostatic radiator valves with
squeeze connection of the company Danfoss,
series RAVL (thermostat connection 26 mm).

by using the concealed limiting elements.
people.
2017 1.15
1.a Thermostats
Thermostat "Uni L" M 30 x 1.0
the radiator Special thermostats
Control Packing
range unit
Thermostat "Uni L" M 30 x 1.0 For Oventrop valves manufactured until 1998.
Award:
with liquid sensor Thermostat "Uni L"
marking "Uni L" on lower side Busse Design Ulm
b d Longlife Design Award
white,
with remote sensor
Special thermostats Suitable for Kosmia thermostatic radiator valve

with liquid sensor bodies.
Thermostat "Uni LK" (M 28 x 1.0)
Thermostat "Uni LA" (M 28 x 1.5) Suitable for Herz thermostatic radiator valve
bodies.

7-28 C 1613465 without '0' setting
Thermostat "Uni LI" (M 32 x 1.0) Suitable for Ista thermostatic radiator valve
bodies manufactured since 1985.
Thermostat "Uni LR" (M 33 x 2.0) Suitable for Rosswein thermostatic radiator

valve bodies.
Thermostat "Uni LM" (M 38 x 1.5) Suitable for Meges thermostatic radiator valve
bodies.
Thermostat "Uni LO" (M 38 x 1.5) Suitable for Oreg (Ondal) thermostatic radiator
valve bodies.
Thermostat "Uni LV" (squeeze connection) Suitable for Vaillant thermostatic radiator valve
bodies manufactured since 1981.
Thermostat only for "maxi/mini" thermostatic radiator valves The valves of this series are no longer
manufactured up to 1974 (M 40 x 1.5) produced.
anthracite/white (10) 1015500
1.16 2017
1
1.a Thermostats
the radiator Accessories for thermostats
Packing
unit
Accessories for thermostats
Angle pattern adapter

M 30 x 1.5/ M 30 x 1.5 Connection to the valve: M 30 x 1.5
Connection to the thermostat: M 30 x 1.5
white (25) 1011450
anthracite model (25) 1641451
squeeze connection/squeeze connection Connection to the valve: squeeze connection

Connection to the thermostat:
white (10) 1011452 squeeze connection
For the connection of thermostats at a right

angle to the operating direction of the valve;
especially suitable for radiators with integrated
distributor; connection at the left and right
hand side of the radiator.
Adapter, nickel plated

for the conversion of connection thread
M 30 x 1.0 to M 30 x 1.5 (10) 1011445 For Oventrop valves manufactured up to 1998.

M 32 x 1.0 to M 30 x 1.5 (50) 1661445 For Ista valves.
"Uni-Clip" Graduated collar for "Uni XH", Due to the vertical position of the figures, the
"Uni XHM" and "Uni XD" set values can be easily read off in case of
lateral connection of the thermostat (for
right hand model, 50 pieces 1011396 thermostats with '0' setting).
left hand model, 50 pieces 1011397
Collar nut cover For the collar nuts of the thermostats

Set = 5 pieces "Uni XH", "Uni XHM", "Uni LH", "Uni LHZ",
"Uni LA", "Uni SH", "vindo TH" and
anthracite (10) 1011380 "pinox H".
gold plated (10) 1011382
stainless steel finish (10) 1011383
white (10) 1011393
white
set = 5 pieces (10) 1011493 "Uni L"
Anti-threft ring For the stabilisation and protection of the

for thermostats "Uni XH", "Uni XHM", "Uni LH", "Uni LHZ", "Uni SH", thermostatic control head from theft.
"Uni L", "Uni LA" and "vindo TH"
white (10) 1011766

set = 5 pieces
for thermostats "Uni XD", "Uni LD" and "vindo TD" For further information see
set = 5 pieces (10) 1011775
2017 1.17
1 control / Hydronic balancing at 1.a Thermostats
the radiator Manual heads
Packing
unit
Reinforcing cap The reinforcing caps are delivered with an Allen

white key.
oventrop
for thermostats "Uni LH", "Uni LHZ" and "Uni LA"
not lockable (10) 1011865

lockable (10) 1011866
for thermostat "Uni L"

lockable (10) 1011811
for thermostat "Uni LD"
Reinforcing cap made of brass
connection thread (10) 1189381

M 30 x 1.5
Combined cap Open/Close with Allen screw
connection thread (5) 1627965

M 30 x 1.5
Tool for thermostats "Uni LH", "Uni LHZ", To release the graduation cap and clips.
"Uni LD", "Uni LDV", "Uni LDVL",
"Uni L" and special thermostats
bag of 5 pieces (10) 1989100
For nominal temperature setting at the

Setting key 1011497 thermostat.
for thermostat "Uni LHB"
Universal tool For setting of the nominal temperature value at

the thermostat "Uni LHB", presetting at the
for thermostat "Uni LHB", (50) 1011489 valve as well as releasing of the graduation cap
"Uni LH" and thermostatic valves "AV 9" and "AQ" of the thermostats "Uni LH", "Uni LHZ",
for thermostats "Uni LHB", (50) 1011496 "Uni LD", "Uni LDV", "Uni LDVL", "Uni L"
"Uni LH" and thermostatic valves "AV 6" and special thermostats.
With additional Allen key (2.5 mm) to secure
the thermostat "Uni LHB".
Extensions
L = 20 mm
for thermostatic valves (10) 1022698 For "Unibox T", "Unibox plus", "Unibox TQ"
and "Unibox Q plus".
Cover
for all remote sensors
Set = 5 pieces (10) 1011698
Manual heads The manual head allows the subsequent

white conversion to actuators or thermostats without
the necessity to drain the system.
connection thread M 30 x 1.5 (10) 1012565
connection (10) 1012575

squeeze connection
1.18 to be discontinued 2017

1
the radiator 1.b Room thermostats
Page
1.b Room thermostats

Content
Room thermostats (heating/cooling) with fan drive 1.22
2017 1.19
1 control / Hydronic balancing at 1.b Room thermostats
the radiator Room thermostats (heating)
Packing
unit
Room thermostats (heating)
Room thermostat-clock - surface mounting (heating) The electric room thermostat-clock is required
Heating two point control for individual room temperature control of
heating systems in combination with the
with daily setting electrothermal actuators (two point)
"Aktor T 2P". Output signal pulse-width
230 V (78) 1152551 modulation.
Temperature range: 5 C up to 30 C
with weekly setting Heating:
Use electrothermal actuators (two point)
230 V (78) 1152552 closed with current off.
24 V 1152554 Central temperature setback is carried out
according to a timed programme.
Limitation of the control range by using the
concealed limiting elements.
Room thermostat - surface mounting (heating) The electric thermostat is used for individual
Heating two point control room temperature control in combination with
the electrothermal actuators (two point)
230 V (25) 1152051 "Aktor T 2P".
24 V (25) 1152052 Temperature range: 5 C up to 30 C
Heating:
"closed with current off". As for item no.
1152051/52/55/71/72, temperature may be set
230 V (25) 1152055 back by use of an external time switch (item
with concealed temperature setting no. 1152551/52 for 230 V, item no. 1152554
for 24 V).
Cooling:
"open with current off".
Limitation of the control range of item no.

1152051/52/71/72 by using the concealed
limiting elements.
Room thermostat - flush mounting (heating)

Heating two point control
230 V (128) 1152071

24 V (128) 1152072
Room thermostat - flush mounting (heating) With LCD display and adjustable timed
with display programme.
230 V (40) 1152561
24 V (40) 1152562 Operating current range (item no. 1152561):
100 up to 230 V AC
Heating:
"closed with current off" (terminal "NC") or
"open with current off" (terminal "NO").
1.20 2017
1.b Room thermostats 1
Room thermostats (heating/cooling)
the radiator Room thermostat - surface mounting (heating or cooling)
Packing
unit
Room thermostat - surface mounting (heating and cooling) The room thermostat is used for
Heating 0 - 10 V control individual room temperature control in
Cooling 0 - 10 V control combination with the electrothermal actuator
(0- 10 V) "Aktor T ST L NC", item no.
24 V (25) 1152151 1012953, page 1.27, or the electromotive
actuator "Aktor M ST L", item no.
1012705/06, page 1.28 (may also be
used in three- or four-pipe systems).
With one analogue output 010 V each for
heating and cooling as well as adjustable
neutral zone (0.57.5 K).
Room thermostat - surface mounting (heating or cooling) Room thermostat for individual room
Heating two point control temperature control. Adjustment of the nominal
Cooling two point control temperature value, absence or presence. Entry
for operating mode changeover from heating or
230 V 1152063 cooling (change-over).

1 control / Hydronic balancing at 1.b Room thermostats
the radiator Room thermostats (heating/cooling) with fan drive
Packing
unit
Room thermostats (heating/cooling) with fan drive
Room thermostat - surface mounting (heating and cooling) The room thermostat does not only feature
Heating 0 - 10 V control analogue outlets 0-10 V for heating and
Cooling 0 - 10 V control cooling, but also a 3-stage ventilator switch
with fan drive (24 V - 240 V) for the activation of fan
convectors (fan coil units).
24 V (25) 1152153 The room thermostat is used for individual
room temperature control in combination with
the electrothermal actuator (0-10 V) "Aktor T
ST L NC", item no. 1012953, page 1.27 or
the electromotive actuator "Aktor M ST L", item
no. 1012705/06, page 1. 00 (may also be used
in three- or four-pipe systems).
Room thermostat - surface mounting (heating or cooling) The room thermostat is used for heating or
Heating two point control cooling in combination with electrothermal
Cooling two point control actuators (two point) "Aktor T 2P" and fan
with fan drive convectors (fan coil units).
The room temperature is maintained at the
230 V 1152351 chosen level. With switch for Heating-Off-
Cooling and fan switch.
Heating/cooling:
closed with current off.

Room thermostat - surface mounting (heating or cooling) With LCD display and adjustable timed
Cooling two point control Temperature range: 5 C up to 35 C
with fan drive Heating or cooling:
closed with current "off".
230 V 1152451 For further information see
24 V 1152452 "Technical information":
Room thermostat - surface mounting (heating and cooling) Electronic room thermostat with digital display
with display for ventilation systems with heating and cooling
Heating two point control function.
Cooling 0 - 10 V control
with fan drive
24 V 1152065
Room thermostat - surface mounting (heating or cooling)

with display
Heating or cooling 0 - 10 V control
with fan drive
24 V 1152064

1
the radiator 1.c Actuators
Page
1.c Actuators
Content
Combination possibilities of valves and actuators 1.24
"Aktor MH CON B" (ENOCEAN) Wireless actuator 1.29
2017 1.23
1
L
F
E
A
K
B
N
H
C
1.24

4
3
2
Illustration
series RA)
Aktor M 3P L
Aktor M ST L
Aktor M ST L
Aktor M 3P H
Aktor M CON B
Aktor M ST EIB
Aktor T ST L NC
Aktor M ST LON
Aktor M ST L NC
Aktor M 2P H/L NC
Aktor MH CON B (ENOCEAN)

Aktor M 2P H/Aktor M 2P L

Aktor T 2P L NC/Aktor T 2P H NC
Aktor T 2P L NO/Aktor T 2P H NO
actuators
Ratings
is possible on consultation.
1150765 1150665 1157065 11560.. 1012715/16 1012710/11 1012709 1012708 1012717 1012706 1012705 1012953 10124.. 10124.. Item. no
electromotive, electromotive, electromotive with electromotive, electromotive with mod. electromotive, modulating electrothermal, electrothermal, electrothermal,
elektromotive elektromotive elektromotive elektromotive
system LON system EIB / KNX emergency function open with current off emergency function with position feedback electromotive closed with current off open with current off closed with current off Model
Mignon (2x) Mignon (2x) nom. 48 V 24 V 230 V/24 V 230 V/24 V 230 V 24 V 24 V 24 V 24 V 24 V 24 V / 230 V 24 V / 230 V Operating current
steady steady Operating behaviour
kvs-Wert kann vermindert werden
(Controller integrated) (Controller integrated) steady steady 2 point 2 point 3 point 3 point steady (010 V) steady (010 V) steady (010 V) steady (010 V) 2 point 2 point (control signal of the controller) With due consideration of the valve parameters,
Standard values without considering tolerances.
EnOcean EnOcean Interface

LON EIB / KNX digital digital digital digital analogue analogue analogue analogue digital digital
(EEP A5-20-01) (OV wireless)
Characteristic parameters for CBC

the combination with actuators of other manufacturers
11.0 11.0 11.2 11.2 11.2 11.2 11.2 11.2 11.2 11.2 11.2 11.2 11.2 11.2 Lower lift position [mm]
the radiator
RPiston stroke actuator effective valve lift
15.4 15.4 15.2 15.2 15.8 17.0 15.8 15.8 15.8 15.8 15.8 15.8 15.8 15.8 Upper lift position [mm]
2 2 2.6 - 4.0 2.6 - 4.0 - - - - 4.0 0.5 - 4.0 0.5 - 4.0 4.0 - - Piston stroke [mm]
GValid for sum resulting from pipework and valve
> 80 > 80 > 90 > 90 > 90 > 90 > 90 > 90 > 90 > 90 > 90 > 90 > 90 > 90 Operating power [N]
~3 s/mm ~3 s/mm ~30 s/mm ~30 s/mm ~3 s ~15 s/mm ~15 s/mm ~15 s/mm ~15 s/mm ~40 s/mm ~5 min ~5 min Medium floating time
IP20 IP20 IP44 IP44 IP40 IP54 IP40 IP40 IP 40 IP40 IP40 IP54 IP54 IP54 Protection
IIn combination with Oventrop extension, item no. 1022698
1 Can also be connected to valves with different connections
+90 +90 +100 +100 +100 +100 +100 +100 +100 +100 +100 +100 Max. fluid temperature [C]
using Oventrop valve adapters (for instance company Danfoss,
In vertical to horizontal position, not suspended. beliebig Permissible installation position

Demands on
actuators
DN
Valve
Piston stroke Piston stroke Piston stroke Piston stroke Piston stroke Piston stroke Piston stroke Piston stroke Piston stroke Piston stroke Piston stroke Piston stroke Piston stroke Piston stroke
Ratings
Art.-Nr.
Actuator
Valve lift h [mm]
Drive
Drive
Drive
Drive
Drive
Drive
Drive
Drive
Drive
Drive
Drive
Drive
Drive
Drive
characteristic line
Closing dimension x [mm]
(lower lift position of valve)
Lower lift position [mm]

Upper lift position [mm]
Closing press. [N] min/max.

tial pressure in operation [bar]
Recommended max. differen-
Valve characteristic line

(examples)
Illustration
Flow rate
1

2.2
0.2
11.8
90 / 150
Effective piston stroke

11.3 or lower
10152025
14.0 or higher
4
4
4
4
AV 9, RFV 9, CV 9
1183..., 1185..., 1162...
Flow rate
2

2.9
0.2
11.8
1181...
A, RF
90 / 150

11.3 or lower
14.7 or higher
1015202532

4
4
4
4
Flow rate
3

1.6
0.2
11.8
AF
1180...
90 / 150
101520

11.3 or lower
13.4 or higher
4
4
4
4
2017
Combination possibilities of valves and actuators
1.c Actuators
Flow rate
5
4

3.0
11.8
AZ V
1187...
90 / 150
15 20 25
11.3 or lower
4
4
4
4
14.8 or higher
1
1.c Actuators
the radiator Combination possibilities of valves and actuators
4 5 6 7 8 9 10 11 12 13 14
+
Multiblock T-RTL Multiblock TQ-RTL Three-way Valve inserts for radiators Valve inserts GHQ for radiators
AZ V AZ H AQ E EQ Multiblock T/TU/TFU Multiblock TQ Valves with insertion tube conversion valves with integrated distributor with integrated distributor
1187... 11884... 1183... 1163... 1163... 11840... 11840... 11835../16435.. 11805.. 10180.. 101908.
15 20 25 2025 101520 15 15 15 15 15 1520 - -
11.8 11.8 11.8 11.8 11.8 11.8 11.8 11.8 11.8 11.8 11.8
5 0.2 0.6 (1.5) 0.2 0.6 (1.5) 0.2 0.6 (1.5) 0.2 0.2 0.2 0.6 (1.5)
3.0 3.2 1.6 2.2 1.6 2.2 1.6 2.9 1.6 2.2 1.6
14.8 or higher 15.0 or higher 13.4 or higher 14.0 or higher 13.4 or higher 14.0 or higher 13.4 or higher 14.7 or higher 13.4 or higher 14.0 or higher 13.4 or higher
11.3 or lower 11.3 or lower 11.3 or lower 11.3 or lower 11.3 or lower 11.3 or lower 11.3 or lower 11.3 or lower 11.3 or lower 11.3 or lower 11.3 or lower
90 / 150 90 / 150 90 / 150 90 / 150 90 / 150 90 / 150 90 / 150 90 / 150 90 / 150 90 / 150 90 / 150
1
Flow rate
Flow rate
Flow rate
Flow rate
Flow rate
Flow rate
Flow rate
Flow rate
Flow rate
Flow rate
Flow rate
2 3
Effective piston stroke Effective piston stroke Effective piston stroke Effective piston stroke Effective piston stroke Effective piston stroke Effective piston stroke Effective piston stroke Effective piston stroke Effective piston stroke Effective piston stroke

4 4 4 4 4 4 4 4 4 4 4

4 4 4 4 4 4 4 4 4 4 4

4 4 4 4 4 4 4 4 4 4 4

4 4 4 4 4 4 4 4 4 4 4
2017 1.25
1 control / Hydronic balancing at 1.c Actuators
the radiator "Aktor T" Electrothermal actuators
"Aktor T" Electrothermal actuators Oventrop electrothermal actuators are used for
heating, ventilation and air conditioning. The
"Aktor T 2P" Electrothermal actuators (two point) actuators serve to control the room
connection thread M 30 x 1.5 temperature and can be used e. g. with
conventional radiators, radiators with
"H NC", closed with current "off", 230 V 1012415 integrated distributor, distributors/collectors for
"H NO", open with current "off", 230 V 1012425 surface heating, radiant ceiling panels, chilled
"L NC", closed with current "off", 24 V 1012416 ceiling systems and induction air systems in
"L NO", open with current "off", 24 V 1012426 combination with two point room thermostats.
"H NC", closed with current "off", 230 V 1012435 Further applications in bivalent heating
with mounted auxiliary switch installations.
"L NC", closed with current "off", 24 V 1012442
cable 2 m long For zone and room temperature control.
"H NC", closed with current "off", 230 V 1012452
cable 2 m long Connecting cable 1 m.
"H NC", closed with current "off", 230 V 1012455 With "First-Open" function (except for
cable 5 m long actuators "open with current off") and
"H NC", closed with current "off", 230 V 1012459 stroke index.
cable 10 long Simple plug-in connection with valve adapter.
"M NC", closed with current "off", 120 V 1012420#
only in approved countries outside the EU Actuators can be installed in any position.
As for the model with auxiliary switch, a pump

can for instance be switched via the integrated
volt free contact.
Due to their construction, the electrothermal

actuators are secured against overvoltage
which could occur when switching on neon
tubes. A varistor is thus not necessary.
# NRTL approval according to

UL-specification.
May only be installed in approved countries
outside the EU.
"Aktor T 2P" Electrothermal actuators (two point) These actuators can be fitted without adapter
squeeze connection to the integrated distributors and thermostatic
radiator valves with squeeze connection of the
"H NC", closed with current "off", 230 V 1012418 company Danfoss, series RA.
"L NC", closed with current "off", 24 V 1012419
Connecting cable 1 m.
With "First-Open" function and stroke index.
Simple plug-in connection with valve adapter.
Actuators can be installed in any position.


Combination possibilities of valves and actuators: Page 3.08
1.26 2017
1
1.c Actuators
the radiator Accessories electrothermal actuators
Packing
unit
"Aktor T ST" Electrothermal actuator (0-10 V) The actuator (0-10 V) can be used in
Proportional actuator centralised building control systems in
connection thread M 30 x 1.5 combination with the electronic room
thermostat, item no. 1152151/1152153, or with
"L NC", closed with current "off", 24 V 1012953 a central controller.
with automatic recognition of neutral point and valve travel Plug-in connecting cable 1 m.
Easy plug-in connection with valve adapter.
Accessories electrothermal actuators
For electrothermal actuators, item no.

1012415/25/16/26/35/42/52/55/59/20 and 1012953
Valve adapter Replacement valve adapter for electrothermal

actuators.
The high model is required when using the

high model (5) 1012462 actuators, item no. 10124.. and 1012953,
connection thread M 30 x 1.5 in combination with the regulating valves
"Hycocon ETZ/HTZ" as well as the fittings
"Multiblock T/TU/TFU/TQ" and the design
cover (11 mm higher than standard).
The adapter is required for Oventrop valves

connection thread M 30 x 1.0 (5) 1012890 with connection thread M 30 x 1.0
(up to 1998) in combination with the
electrothermal actuators.
Reinforcing cap To protect electrothermal actuators against

vandalism.
for electrothermal 1012450 The special valve adapter with connection
actuators (two point) thread M 30 x 1.5 for fixing of the reinforcing
and (0-10 V) cap is included.
2017 1.27
1 control / Hydronic balancing at 1.c Actuators
the radiator "Aktor M" Electromotive actuators
"Aktor M" Electromotive actuators Oventrop electromotive actuators are used for
"Aktor M" Electromotive actuators actuators serve to control the room
with manual setting, adjustable mode of operation conventional radiators, radiators with
integrated distributor, distributors/collectors for
"ST L", 24 V, modulating proportional 1012705 surface heating (except for item no.
actuator, 0-10 V, 1012710/11), radiant ceiling panels, chilled
automatic anti-blocking function and ceiling systems and induction air systems.
recognition of neutral point, Further application in bivalent heating
multiple characteristic lines adjustable installations.
"ST L", 24 V, modulating proportional 1012706 The actuators (0-10 V) can be used in
actuator, 0-10 V, with position feedback, centralised building control systems in
automatic anti-blocking function and combination with the electronic room
recognition of neutral point, thermostat, item no. 1152151/53, or with a
mutiple characterstic lines adjustable central controller.
Anti-blocking function:
"3P L", 24 V, three point actuator, 1012708 The actuator opens and closes the valve
without anti-blocking function completely once every 24 hours.
Connecting cable 1.5 m.
"3P H", 230 V, three point actuator, 1012709
without anti-blocking function, With the appropriate control, the actuator, item
mode of operation not adjustable no. 1012708, can also be used for two point
operation.
In case of electric emergeny function, the
"ST L NC", 24 V 1012717 actuator returns to zero position if the power
modulating proportional actuator, supply is interrupted.
0 - 10 V, with electric emergency function and
automatic recognition of neutral point
Short operating time (about 3 sec.).

"2P H", 230 V, two point actuator, 1012710 Connecting cable 1.5 m.
without anti-blocking function
1012711
"2P L", 24 V, two point actuator,
In case of emergency function, the actuator

"2P H NC", 230 V, two point actuator, 1012715 returns to zero position if the power supply is
with emergency function interrupted.
"2P L NC", 24 V, two point actuator, 1012716

with emergency function
1.28 2017
1.c Actuators
"Aktor M ST EIB" Electromotive actuators 1
"Aktor M ST LON" Electromotive actuators
the radiator "Aktor MH CON B" (ENOCEAN) Wireless actuator
"Aktor M ST EIB" Electromotive actuators The electromotive actuator "KNX/EIB" is

System "KNX/EIB" suitable for a direct connection to the
European installation bus control system. The
with integrated bus coupling power absorption is extremely low, so that a
separate power supply is not needed. The
"Uni EIB H" actuator is equipped with one or two integrated
connection thread M 30 x 1.5 binary entries to which a window contact and a
movement sensor may for instance be
with one binary entry 1156065 connected.
with two binary entries 1156066 The connection of the bus and the binary entry
is made via a 4- or 6-core cable (1 m).
Uni EIB D
with adapter for squeeze connection
with one binary entry 1156075

with two binary entries 1156076
"Aktor M ST LON" Electromotive actuators The electromotive actuator "LON" is suitable

System "LON" for the direct connection to LonWorks
networks.
"OVLONH" The power absorption is extremely low, so that
connection thread M 30 x 1.5 a separate power supply is not needed when
using the Link-Power-Technology.
with one binary entry 1157065 The actuator is equipped with an integrated
binary entry to which a window contact may for
OVLOND instance be connected.
with adapter for squeeze connection The connection of the bus and the binary entry
is made via a 4-core cable (1 m).
with one binary entry 1157075
The data to be read in the ETS data bank or the
LonTalk-Software can be downloaded from
Product data bank "KNX/EIB" and 1156051
the internet under www.oventrop.de (category
application programmes "LON"
"Software") free of charge.
"Aktor MH CON B" (ENOCEAN) Wireless actuator Electronic actuator for room temperature
control. The actuator supports the EnOcean
connection thread M 30 x 1.5 1150765 profile A5-20-01 and can be connected to
Electronic actuator communication centres/gateways or room
with bi-directional wireless communication, thermostats of other manufacturers.
battery operated
traffic white (RAL 9016)
Only functions in combination with communication The actuator is not compatible with the
centres/gateways and room thermostats using the EEP gateway "Synet CR" and the wireless
(EnOcean Equipment Profile) A5-20-01. thermostats "R-Tronic".
The Oventrop actuators can e.g. be

System Oventrop actuators Item no.
used with the following bus systems:
Uni EIB H GIRA Instabus KNX/EIB

with one binary entry 1156065 ABB i-bus KNX
with two binary entries 1156066 Busch-Jger installation bus
Jung KNX-System
KNX/EIB
Uni EIB D Merten KNX
with one binary entry 1156075 Siemens GAMMA instabus
with two binary entries 1156076 Woertz Building Control Systems
and others
OVLONH Gesytec
with one binary entry 1157065 SVEA Building Control Systems
Echelon
OVLOND ELKA Electronics
LON
with one binary entry 1157075 Kieback & Peter
t.a.c. TAC Vista
Regulex
and others
EnOcean Aktor MH CON B iEXERGY (wibutler)

(wireless) (ENOCEAN) 1150765
and others
with wireless module
2017 1.29
1
the radiator 1.d "i-Tronic" Climate display device
Page
1.d "i-Tronic" Climate display device

Content
"i-Tronic TFC" 1.32
2017 1.31
the radiator 1.d "i-Tronic" Climate display device
"i-Tronic TFC" Climate meter for monitoring the important

Climate meter displaying the room climate variables: temperature, humidity
temperature, humidty and and CO2 content. These values will supply
CO2 content in the ambient air information on the beginning and end of a
traffic white (RAL 9016) necessary room airing (e.g. window opening).
Furthermore, the min./max. values of the last
for wall attachment 1150683 24 hours are displayed.
with power pack for flush sockets
(power supply 100-240 V ~/ 50-60 Hz) The climate meter can not only be fixed onto
with wall bracket the wall with the help of a wall bracket and a
flush-mounted power pack but it is also
suitable for mobile use.
Two table stand solutions are offered for
mobile use: One with a power pack for mains
power supply and another with two
rechargeable batteries with integrated charging
electronics.
for mobile use 1150685

with wired power supply,
table stand and mains adaptor
(power supply: 100-240 V ~/ 50-60 Hz)
for mobile use 1150688 Two integrated rechargeable batteries

with rechargeable batteries, (2 x AA NiMH) allow for the mobile
integrated charging electronics in the table stand monitoring of the important room climate
and power pack for battery charging variables temperature, humidity and CO2
content.
Operation of rechargeable batteries:
approx. 6 days
1.32 2017
1
the radiator "Synet CR" Gateway and hydronic balancing
Page

Content

Accessories 1.37
Automatic presetting with "Synet CR" 1.38
and automatic hydronic balancing with "Q-Tech"
2017 1.33
1 control / Hydronic balancing at 1.e "R-Tronic" Climate display device/control
R-Tronic Climate display device/control Option 1: R-Tronic RT B

Wireless thermostat for room temperature control with
The system R-Tronic consists of a battery operated actuator for timer functions (battery operated, ush-mounted power
wireless thermostats Aktor MH/MD CON B and the wireless pack or mains adaptor available as accessories)
thermostat R-Tronic. The wireless thermostat can be battery or
mains operated. During battery operation, a maximum of three Option 2: R-Tronic RTF B
actuators Aktor MH/MD CON B can be connected to one As option 1, but with integrated humidity sensor and
R-Tronic and up to 8 actuators during mains operation. display of the relative humidity RH in % (battery operated,
ush-mounted power pack or mains adaptor available
During mains operation, window contacts and the one channel as accessories)
wireless receiver R-Con 2P can be connected additionally. The Option 3: R-Tronic RTFC K
wireless receiver transmits a switching signal depending on a CO2 As option 2, but with additional sensor for measurement
threshold for one fan. of the CO2 content and display of the CO2 concentration
Up to 16 wireless thermostats can be connected to the gateway in ppm (no battery operation, power supply via external
Synet CR for mobile quick access via Internet. ush-mounted power pack or mains adaptor).
Option 4: R-Tronic RTFC K with R-Con 2P
As option 3, but additionally with one channel wireless
receiver R-Con 2P for the activation of a fan depending
on a CO2 threshold for fresh air supply.
Options System illustrations

1.
d
c
+
Aktor MH/MD CON B
a
R-Tronic RT B
2. b
+ Options 1, 2, 3, 4 (climate display device/control)
a R-Tronic RT B / RTF B / RTFC K Wireless thermostat

Aktor MH/MD CON B b Aktor MH/MD CON B Actuator for wireless thermostats
c) FK-C F Wireless window contact
R-Tronic RTF B d) Synet CR Gateway
3. e) R-Con 2P Wireless receiver (1 channel) for CO2 dependent fan
activation (only in combination with R-Tronic RTFC K)
+
Aktor MH/MD CON B
R-Tronic RTFC K
4.
+ +
Aktor MH/MD CON B R-Con 2P
R-Tronic RTFC K
1.34 2017
1
"R-Tronic RT B" Wireless thermostat Electronic wireless thermostat "R-Tronic RT B"

for room temperature control according to
Wireless thermostat adjustable timed programmes. The nominal
with bi-directional wireless communication, and actual temperature of the room can be
battery operated, displayed.
surface mounting Up to 3 participants (such as actuators for
wireless thermostats "Aktor MH/MD CON B"
traffic white (RAL 9016) and wireless receivers "R-Con") can
be connected during battery operation .
1150680 A supply via the network is an alternative,
1150880# see accessories page 1.37.
During mains operation, the number of
participants can be increased to 8 which
allows, for instance, for an integration of
window contacts for room temperature
setback.
"R-Tronic RTF B" Wireless thermostat with humidity display Electronic wireless thermostat "R-Tronic
RTF B" for room temperature control
Wireless thermostat according to adjustable timed programmes.
with bi-directional wireless communication and The nominal and actual temperature of the
integrated humidity sensor, room can be displayed. An integrated
battery operated, humidity sensor supplies information on the
surface mounting relative humidity RH in %. The value is
displayed in the text line.
traffic white (RAL 9016) Up to 3 participants (such as actuators for
1150681 and wireless receivers "R-Con") can be
1150881# connected during battery operation .
A supply via the network is an alternative,
see accessories page 1.37.
allows, for instance, for an integration
of window contacts for room temperature
setback.
"R-Tronic RTFC K" Wireless thermostat with humidity and CO2 Electronic wireless thermostat "R-Tronic
display RTFC K" for room temperature control
integrated humidity and CO2 sensor room can be displayed. An integrated
humidity sensor supplies information on
the relative humidity RH in % and an
traffic white (RAL 9016) integrated CO2 sensor on the CO2
content in ppm in the room air. Both
values are displayed in the text line.
Power supply:
If preset limits are exceeded, a symbol asking
Flush-mounted power pack (100-240 V ~/ 50-60 Hz)
for fresh air supply is displayed.
with wall bracket
Up to 8 participants (such as actuators for
1150682 wireless thermostats "Aktor MH/MD CON B",
1150882# wireless receivers "R-Con" and
wireless window contacts for room
temperature setback) can be connected to the
Power supply:
"R-Tronic RTFC K".
Mains adaptor (100-240 V ~/ 50-60 Hz)
Power is supplied by a flush-mounted power
with table stand
pack or a mains adaptor with table stand.
1150684
# Compatible with the gateway "Synet CR"
1150884#

1 control / Hydronic balancing at 1.e "R-Tronic" Climate display device/control
"Aktor MH CON B" Wireless actuator (M 30 x 1.5) Electronic actuator for wireless thermostats
Connection thread M 30 x 1.5 adjustable timed programmes at the wireless
Electronic actuator for wireless thermostats thermostats "R-Tronic RT B/ RTF B/ RTFC K".
with bi-directional wireless communication, Heating operation and the positon of the valve
battery operated (OPEN/CLOSED) of the "Aktor MH/MD CON B"
are shown on the display of the wireless
traffic white (RAL 9016) thermostat.
Operation via the menu-driven wireless
Only functions in combination with the thermostat.
wireless thermostats "R-Tronic RT B/ RTF B/ RTFC K".
Awards:
1150665
ICONIC AWARDS 2016
"Aktor MD CON B" Wireless actuator (squeeze connection) These actuators for wireless thermostats can
be fitted without adapter to the integrated
Squeeze connection distributors and thermostatic radiator valves
Electronic actuator for wireless thermostats with squeeze connection of the company
with bi-directional radio communication, Danfoss, series RA.
battery operated
Only functions in combination with the wireless

thermostats "R-Tronic RT B/ RTF B/ RTFC K".
1150675
1.36 2017
1.e "R-Tronic" Climate display device/control 1
the radiator Accessories
Accessories For the conversion of battery operated

wireless thermsotats "R-Tronic RT B/ RTF B"
Flush-mounted power pack 1150692 to an external power supply
(100-240 V ~ /50-60 Hz) (100-240 V ~/ 50-60 Hz).
with wall bracket
Mains adaptor (100-240 V ~/ 50-60 Hz) 1150694

with table stand, white
for stationary use, suitable for
"i-Tronic TFC" and
"R-Tronic RT B/RTF B"
"FK-C F" Wireless window contact A radio signal is transmitted when opening or
closing the window. The solar powered energy
solar powered, 1153070 storage ensures a maintenance-free operation.
white (similar to RAL 9003)
Compatible with:
-"R-Tronic" Wireless thermostats
("DynaTemp HA")
-Wireless room modules ("DynaTemp BA")
Note:
The wireless thermostats "R-Tronic" require the
software version 01-06-02 or higher and have
to be mains-operated.
"RP-S F" Wireless repeater The wireless repeater "RP-S F" serves to
amplify the signal between the wireless
for installation into an earthed plug 1150699 thermostat "R-Tronic" and the communication
white (similar to RAL 9003) centre "Synet CR" as well as the wireless
receiver "R-Con"/"R-Con 2P".
"R-Con 2P" Wireless receiver (1 channel) For activation and deactivation of fans
and ventilation systems. The switching
NC
230 V, flush mounting, 1150710* signal is generated by the wireless thermostat

NO
R-Con 2P
"R-Tronic RTFC K" if a set CO2 value is

1
4(1)A / 250V
cabling on site
exceeded or undercut.
2 230V
1 2 L N
Switching output (volt free):
"NC" closed with current "off" Two rotary switches at the "R-Con 2P" allow
"NO" open with current "off" for
1. the configuration of the switching output
"NC" closed with current "off"
"NO" open with current "off"
2. a manual setting of the switching output to
AUTO, ON, OFF or TEACH IN.
Maximum switching capacity of the volt free
output: 4(1)A/ 250 V AC
2017 *New in catalogue 2017 1.37

Automatic presetting with "Synet CR"
the radiator and automatic hydronic balancing with "Q-Tech"
Hydronic balancing with Synet CR and valves with

Q-Tech in detached and semi-detached houses Smartphone Entry:
OV app Building characteristics
Automatic presetting with Synet CR: (year of construction/total heated
Automatic presetting of thermostatic radiator valves, for instance surface)
in detached or semi-detached houses, can be carried out via a Room data (room area)
smartphone or tablet with the help of the gateway Synet CR Temperature difference
and the actuators for wireless thermostats Aktor MH CON B. Start of the automatic calculation of
Manual presetting at each radiator on the spot is thus not the valve stroke limitations
required.
Synet CR Automatic calculations:
Apart from room temperature control, the gateway Synet CR Gateway Automatic calculation of the heat load
allows for the calculation of the maximum required volume ow Automatic calculation of the maximum
for each radiator. The gateway Synet CR is preloaded with the required volume ows and stroke
calculation procedure (procedure according to VdZ specialist limitations (strokemax) for a maximum
of 16 different control zones (rooms)
rules for heating optimisation procedure A).
The valve characteristic line of the thermostatic valves with

Q-Tech which allows for the conversion of the detected R-Tronic RT B Automatic transmission of the stroke
volume ows for the stroke limitation of the actuators limitation values to the actuators
R-Tronic RTF B Aktor MH CON B
Aktor MH CON B is integrated in the gateway Synet CR. R-Tronic RTFC K
Setting of the nominal room
Wireless thermostats temperature (further setting options:
The user may carry out automatic presetting within a few steps page 1.35)
via a smartphone or tablet with the help of the setup assistant of
the OV app.
Aktor MH CON B Room temperature control with due

Actuator for wireless consideration of the stroke limitation
Automatic balancing with Q-Tech: (only up to strokemax)
thermostats
Irrespective of differential pressure variations in the heating
system, the radiator volume ow required for room temperature Room temperature control irrespective
control is constantly maintained by the control and regulating of p variations in the heating system.
valve with Q-Tech. After having carried out the automatic Valves with Q-Tech (Valves with Q-Tech from page 1.42)
presetting described above, the volume ow is limited to a
maximum value by the gateway Synet CR and the actuator
Aktor MH CON B mounted onto the thermostatic valve with Sequence of automatic presetting and balancing with Synet CR and
Q-Tech. valves with Q-Tech
Advantages:
Automatic calculation of the required
volume ow for each radiator and
automatic presetting of the
thermostatic valves with Q-Tech
via the actuator Aktor MH CON B
Manual setting of the thermostatic
valves at the radiator is not required
Pipework calculation and regulation
of the risers are not required
Presetting of the valves in the riser
is not required
Hydronically balanced heating
system during full and low demand
Strokemax (Room 2) Strokemax (Room 16) periods
Strokemax (Room 1)
Long battery life span as the
Aktor MH CON B only carries out
control commands for room
temperature control
Room 1 Room 2 Room 16

(maximum number)
System illustration (example): Hydronic balancing with Synet CR and valves with Q-Tech
1.38 2017
1
"Synet CR" Gateway Centre for the simple networking, visualization

and parameterization of "R-Tronic" climate
Centre for the connection of up to 1150687 display devices/contols.
16 "R-Tronic" climate display Up to 16 wireless thermostats or rooms
devices/controls and for regulation can be managed by the centre by transmitting
in combination with "Q-Tech" valves adjustable timed programmes for the
individual rooms from the centre to the
In preparation. "R-Tronic" via the bi-directional radio
communication.
Furthermore, automatic hydronic balancing is

supported in combination with the "Q-Tech"
valves (see page 1.42). For this purpose, the
heat load, the maximum required volume flows
for each radiator as well as the required
maximum stroke limitations at the actuators
"Aktor MH CON B" are calculated by the
gateway "Synet CR" after having entered the
building and room data. The stroke limitations
at the "Q-Tech" valves are carried out
automatically.
Access options:
-Local access in the building
-Worldwide mobile remote access via Internet
User interfaces:
-Integrated web interface
-App for iOS and Android terminals
Interfaces:
-LAN
a. Direct PC/laptop connection
b. Direct router connection
-USB for WLAN stick
a. Access Point Mode
b. Client mode
-868 MHz radio communication with
"R-Tronic" display devices/controls
-Mains adaptor 5 V
Installation options:
Wall attachment with the help of the supplied
fixing plate.
Table stand with mains adaptor see
accessories, page 1.37.
Further information on Page 12.09
2017 1.39
1
the radiator 1.f Valves with "Q-Tech" for automatic hydronic balancing
Page

Content
Thermostatic valves "AQ" 1.42
Thermostatic valves "RFQ" 1.42
Thermostatic valves "AQF" 1.43
Exclusive radiator valves "EQ" 1.44
"Multiblock TQ" Two pipe fitting 1.45
"Multiblock TQ-RTL" 1.46
"Demo-Bloc" 1.47
2017 1.41
Thermostatic valves "AQ"
the radiator Thermostatic valves "RFQ"
Packing
unit
Thermostatic valves "AQ" Valves for thermostats

with "Q-Tech" for automatic hydronic balancing, with valve insert "QA"
infinitely adjustable presetting connection thread M 30 x 1.5
brass, nickel plated
Angle pattern valve
Application:
DN 10 (10) 1183063 Central heating and cooling systems with
DN 15 (10) 1183064 closed circuits, for operation with non-
DN 20 (10) 1183066 aggressive, harmless fluids (e.g. water or
DN 25 (10) 1183068* suitable water and glycol mixtures according
to VDI 2035/NORM 5195).
Max. operating pressure ps: 10 bar (PN 10)
Straight pattern valve Operating temperature ts: 2 C up to 110 C
Flow range: 10 - 170 l/h
DN 10 (10) 1183163
DN 15 (10) 1183164 Function:
DN 20 (10) 1183166 The valves with "Q-Tech" are
DN 25 (10) 1183168* combined control and regulating valves
which are used for room temperature
Reversed angle pattern valve control in combination with thermostats with
liquid sensor or actuators. The max. flow
DN 10 (10) 1183263 rate is set to the required nominal value
DN 15 (10) 1183264 and is constantly maintained within the
DN 20 (10) 1183266 necessary proportional band.
Presetting is carried out by using the

Double angle pattern valve
+ - presetting key supplied with the valves.
Right hand side connection
DN 10 (10) 1183361 The thermostatic valves "AQ" and "RFQ"

DN 15 (10) 1183363 are not suitable for steam installations.
All valve inserts are replaceable by using the

Left hand side connection
+ - special tool "Demo-Bloc" and the coupling set,
DN 10 (10) 1183360 page 1.60, without draining the system.
DN 15 (10) 1183362
All valves are suitable for the installation
with copper pipes.
Compression fittings page 1.140, reinforcing

sleeves page 1.143.
All thermostatic valves "AQ" and "RFQ" have

a light grey protection cap.
Thermostatic valves "RFQ" Reduced dimensions compared with

with "Q-Tech" for automatic hydronic balancing, thermostatic valves "AQ".
infinitely adjustable presetting
Thermostatic valves "RFQ" not suitable for use
Angle pattern valve in combination with female threaded
compression fittings "Cofit S".
DN 10 (10) 1185503
DN 15 (10) 1185504 Compression fittings page 3.45, reinforcing
DN 20 (10) 1185506 sleeves page 1.143.
Straight pattern valve
DN 10 (10) 1185603
DN 15 (10) 1185604
DN 20 (10) 1185606

1
the radiator Thermostatic valves "AQF"
Thermostatic valves "AQF" Valves for thermostats

with "Q-Tech" for automatic hydroncing balancing, with valve insert "QAF"
infinitely adjustable fine presetting connection thread M 30 x 1.5
Angle pattern valve with fine presetting and proportional
control behaviour within a P-range
DN 10 1183003* of 2 K
DN 15 1183004*
DN 20 1183006* Application:
Central heating and cooling systems with
closed circuits, for operation with non-
Straight pattern valve aggressive, harmless fluids (e.g. water or
suitable water and glycol mixtures according
DN 10 1183103* to VDI 2035/NORM 5195).
DN 15 1183104* Max. operating pressure ps: 10 bar (PN 10)
DN 20 1183106* Operating temperature ts: 2 C up to 110 C
Reversed angle pattern valve Function:

The valves with "Q-Tech" are
DN 10 1183203* combined control and regulating valves
DN 15 1183204* which are used for room temperature
control in combination with thermostats with
Double angle pattern valve liquid sensor or actuators. The max. flow
- Right hand side connection rate is set to the required nominal value
+
and is constantly maintained within the

DN 10 1183351* necessary proportional band.
DN 15 1183353*
presetting key supplied with the valves.
-
+
DN 10 1183350* The thermostatic valves "AQF" are not

DN 15 1183352* suitable for steam installations.

special tool "Demo-Bloc" and the coupling set,
page 1.47, without draining the system.
All valves are suitable for the installation

with copper pipes.

sleeves page 1.143.
All thermostatic valves"AQF" have a

wine red protection cap.

1 control / Hydronic balancing at 1.f Valves with "Q-Tech" for automatic hydronic balancing
the radiator Exclusive radiator valves "EQ"
Exclusive radiator valves "EQ" Exclusive radiator valves

with "Q-Tech" for automatic hydroncing balancing,
infinitely adjustable presetting Valves for thermostats
with valve insert "QA"
Angle pattern valve DN 15 connection thread M 30 x 1.5
brass
chrome plated 1163552
white (RAL 9016) 1163562 Application:
aggressive, harmless fluids (e.g. water or
Straight pattern valve DN 15 to VDI 2035/NORM 5195).
chrome plated 1163652 Operating temperature ts:
white (RAL 9016) 1163662 2 C up to 110 C (chrome plated)
2 C up to 90 C (white)
Application:
The valves with "Q-Tech" are
combined control and regulating valves
rate is set to the required nominal value
necessary proportional band.

The thermostatic valves "EQ" are not suitable

for steam installations.
All valves inserts are replaceable by using the

special tool "Demo-Bloc" and the coupling set,
page 1.60, without draining the system.
All valves are suitable for the installation with

copper pipes.
All thermostatic valves "EQ" have a

light grey protection cap.
1.44 2017
1
the radiator "Multiblock TQ" Two pipe fitting
Packing
unit
"Multiblock TQ" Two pipe fitting "Multiblock TQ" for use on radiators with
with "Q-Tech" for automatic hydronic balancing supply and return pipe connection.
Fitting with infinitely adjustable presetting Distance between pipe centres 50 mm.
and isolating and draining facility Marking "OV 2" on valve body.
brass, nickel plated, with soft seal With valve insert "QA".
for the connection to radiators with Rp female thread To be used:

-for two pipe operation
Straight pattern -as thermostatic valve
-as isolating fitting
(5) 1184073 -for draining
-for filling
Application:
Angle pattern Central heating and cooling systems with
(5) 1184074 aggressive, harmless fluids (e.g. water or
to VDI 2035/NORM 5195).
Operating temperature ts: 2 C up to 110 C
Function:
The fittings with "Q-Tech" are
combined control and regulating fittings

The "Multiblock TQ" is not suitable for

steam installations.
The fittings "Multiblock TQ" have a

light grey protection cap.
For the connection of copper, precision steel,

stainless steel and plastic pipes as well as
Oventrop composition pipe "Copipe", the
Oventrop compression fittings are to be used,
page 1.142.
Alternatively, the compression fittings of other

manufacturers which are suitable for the
connection to male thread G according
to DIN EN 16313 (cone "Euro") may also be
used.
The supply and return pipe connections must

be strictly observed.
The direction of flow must be observed!
2017 1.45
"Multiblock TQ-RTL"
the radiator Design cover
Packing
unit
"Multiblock TQ-RTL" "Multiblock TQ-RTL" for simultaneous

with "Q-Tech" for automatic hydronic balancing connection of radiators with supply and return
Connection fitting for the combination of radiator connection and 50 mm distance between pipe
and surface temperature balance, two pipe fitting, centres as well as surface temperature
with infinitely adjustable presetting, isolating facility balance.
and integrated return temperature limiter, with soft seal, For the separate control of the room
angle pattern, temperature and the return temperature
brass, nickel plated, (limitation).
including mounting aid With valve insert "QA".
for the connection to radiators with Rp female thread To be used:

- for two pipe operation
1184076 - as thermostatic valve at the radiator
- as isolating fitting at the radiator
- for surface temperature balance by
use of a return temperature limiter
Design cover
Application:
Central heating systems with closed circuits,
for "Multiblock T-RTL" and "Multiblock TQ-RTL"
for operation with non-aggressive, harmless
fluids (e.g. water or suitable water and glycol
mixtures according to VDI 2035/NORM
white 1184087
5195).
Max operating pressure: ps: 10 bar (PN 10)
System illustration: Operating temperature ts: 2 C up to 70 C
Function:
The fittings with "Q-Tech" are
combined control and regulating fittings
Supply pipe heating
Multiblock T-RTL/
Multiblock TQ-RTL Presetting is carried out by using the
The fitting "Multiblock TQ-RTL" is not suitable


stainless steel and plastic pipes as well as the
Surface heating Oventrop composition pipe "Copipe", the
page 1.142.
Rosette cover
for "Multiblock T-RTL" and "Multiblock TQ-RTL" Alternatively, the compression fittings of other
chrome plated 1189077 connection to G male thread according
white 1189087 to DIN EN 16313 (cone "Euro") may also be
used.
The supply and return connections must be

strictly observed to guarantee a perfect
function of the fitting.
Block for initial operation The surface circuit can be filled, drained, bled
for "Multiblock T-RTL" and "Multiblock TQ-RTL" and leak tested with installed block for intitial
operation.
1184094
Mounting aid Used for the pre-assembly and fixing of the

for "Multiblock T-RTL" and "Multiblock TQ-RTL" pipes of the heating circuit and the surface
heating.
(5) 1189094
1.46 2017
1.f Valves with "Q-Tech" for automatic hydronic balancing 1
Valve inserts
the radiator "Demo-Bloc"
Packing
unit
Valve inserts # These valve inserts are suitable for all valve
bodies with connection thread M 30 x 1.5 of all
for thermostatic valves "AQ, RFQ, EQ", sizes of the thermostatic valves "A, AV 9, AQ,
fittings "Multiblock TQ, TQ-RTL", AV 6, ADV 9, ADV 6, CV 9, E, EQ, AF, RF,
and "Unibox TQ, Q plus" RFV 9, RFQ and RFV 6".
"QA" (25) 1187065#
"QAF" 1187055*#
Replacement filter mesh for valve insert "QA"
Set = 10 remplacement filter meshes 1187090*
"Demo-Bloc" The "Demo-Bloc" is supplied in a handy bag.

special tool for replacing valve inserts
without draining the system Max. operating pressure ps: 10 bar (PN 10)
connection thread M 30 x 1.5 1188051 Including coupling set for valve insert "QA".
Coupling set for replacement of 1188094

the valve insert "QA"
The differential pressure above the valve

Differential pressure measuring stem 1188093 seat can be measured with the Demo-Bloc
and the differential pressure measuring stem.

1
the radiator 1.g Valves for manual hydronic balancing
Page

Content
Thermostatic valves "AV 9" 1.50
Thermostatic valves "AV 9" (press connection) 1.50
Thermostatic valves "AV 9" (male thread) 1.51
Thermostatic valves "CV 9" 1.52
Thermostatic valves "AF" 1.53
Accessories 1.55
Thermostatic valves "ADV 9" 1.56
Thermostatic valves "RFV 9" 1.57
Radiator lockshield valve "Combi 3G" 1.59
"Demo-Bloc" 1.60
2017 1.49
Thermostatic valves "AV 9"
the radiator Thermostatic valves "AV 9" (press connection)
kv kv
Packing
Article at 1K at 2K kvs Article-No. Hint
unit
P-dev. P-dev.
Thermostatic valves "AV 9" Valves for thermostats

Angle pattern valve
Oventrop valves
DN 10 0.36 0.67 1.10 (25) 1183703 Test according to EN 215
DN 15 0.36 0.67 1.20 (25) 1183704 Reg.-no. 011-6 T 002
DN 20 0.36 0.67 1.30 (25) 1183706
DN 25 0.36 0.67 1.30 (10) 1183708 Keymark - The Oventrop thermostatic valves
"A, AV 9, RF, AF und AZ H" (angle and straight
pattern valves DN 10 - DN 20) with the
thermostats "Uni XH", "Uni LH", "Uni LH" with
remote sensor, "Uni SH", "vindo TH" and
DN 10 0.36 0.67 0.90 (25) 1183803 "pinox H" are Keymark tested and certified.
DN 15 0.36 0.67 1.00 (25) 1183804
DN 20 0.36 0.67 1.20 (25) 1183806 All materials used are silicone free.
DN 25 0.36 0.67 1.20 (10) 1183808
Application:
Reversed angle pattern valve closed circuits, for operation with non-
DN 10 0.36 0.67 0.90 (25) 1183903
DN 15 0.36 0.67 1.00 (25) 1183904
to VDI 2035/ NORM 5195).
DN 20 0.36 0.67 1.20 (25) 1183906
Double angle pattern valve (for short periods up to 130 C)
+ - Left hand side connection
Presetting is carried out by using the presetting
DN 10 0.36 0.67 0.90 (25) 1183470
key, item no. 1183962, or a spanner 13 mm
DN 15 0.36 0.67 1.00 (25) 1183472
or the Heimeier presetting key.
Right hand side connection The thermostatic valves "AV 9" are not suitable
+ -
DN 10 0.36 0.67 0.90 (25) 1183471
DN 15 0.36 0.67 1.00 (25) 1183473 All valve inserts are replaceable by using the
special tool "Demo-Bloc", page 1.60, without
draining the system.
All valves DN 10 up to DN 20 are suitable for

the installation with copper pipes.
sleeves page 1.143.
Attention: Filling and draining of the system

before the valves are preset and the thermostat
Thermostatic valves "AV 9" (press connection) is mounted.
infinitely adjustable pressetting
with press connection for copper, stainless steel and Press connection:
C-steel pipe 15 mm For the direct connection of copper pipes
according to DIN EN 1057/ DVGW GW 392,
Angle pattern valve stainless steel pipes according to DIN EN
10088/ DVGW GW 541 and thin-walled C-steel
DN 15 0.36 0.67 1.20 (25) 1183775 pipe (material no. E195/1.0034) according to
DIN EN 10305-3. Pressing must be carried out
to tighten the connection. Only use press jaws
with the original contours SANHA (SA),
Geberit-Mapress (MM) or Viega (Profipress) in
corresponding size. Processing must be
DN 15 0.36 0.67 1.00 (25) 1183875 carried out according to the installation
instructions.
All thermostatic valves "AV 9" have a white

protection cap with 3 frontal lugs.
- -
+
left right
Thermostats from page 1.08.
1.50 2017
1
the radiator Thermostatic valves "AV 9" (male thread)
kv kv
Packing
unit
P-dev. P-dev.
Thermostatic valves "AV 9" (male thread) Especially suitable as flow and return valve for
infinitely adjustable presetting, with G male threaded pipe distributors of heating circuits.
connection and R male threaded radiator connection
The G male thread of the valves allows for
Angle pattern valve the connection to copper, precision steel and
plastic pipes as well as the Oventrop
DN 15 0.36 0.67 1.20 (25) 1183747 composition pipe "Copipe" by using the
corresponding fittings.
Fittings page 1.136, compression fittings page

Straight pattern valve 1.140, reinforcing sleeves page 1.143.
DN 15 0.36 0.67 1.00 (25) 1183847 Attention: Filling and draining of the system
is mounted.
Reversed angle pattern valve
All thermostatic valves "AV 9" have a white
DN 15 0.36 0.67 1.00 (25) 1183942
- Left hand side connection
+
DN 15 0.36 0.67 1.00 (25) 1183446

-
+
DN 15 0.36 0.67 1.00 (25) 1183447
Universal tool For setting of the nominal temperature value at

the thermostat "Uni LHB", presetting at the
for thermostat "Uni LHB", (50) 1011489 valve as well as releasing of the graduation cap
"Uni LH" and thermostatic valves "AV 9" and "AQ" of the thermostats "Uni LH", "Uni LHZ",
"Uni LD", "Uni LDV", "Uni LDVL", "Uni L"
and special thermostats.
With additional Allen key (2.5 mm) to secure
the thermostat "Uni LHB".
The presetting value can be adjusted with the

Presetting key (10) 1183962 help of the marking on the hexagon of the valve
for thermostatic valves "AV 9, ADV 9, RFV 9, CV 9, E" insert.
and fittings "Multiblock T/TU/TFU/T-RTL" The presetting key fits only in one position.
(manufactured since 2016)
Alternatively, presetting can also be carried out

with a spanner sized 13 mm.
2017 1.51
1 control / Hydronic balancing at 1.g Valves for manual hydronic balancing
the radiator Thermostatic valves "CV 9"
kv kv
Packing
unit
P-dev. P-dev.
Thermostatic valves "CV 9" Chrome plated valves for thermostats

chrome plated brass, chrome plated
Angle pattern valve Application:

DN 15 0.36 0.67 1.20 (25) 1162054 closed circuits, for operation with non-
to VDI 2035/NORM 5195).
(for short periods up to 130 C)
DN 15 0.36 0.67 1.00 (25) 1162154
Double angle pattern valve or the Heimeier presetting key.
The thermostatic valves "CV 9" are not suitable
DN 15 0.36 0.67 1.00 (25) 1162472
Right hand side connection All valve inserts are replaceable by using the
+ -
DN 15 0.36 0.67 1.00 (25) 1162473

copper pipes.

sleeves, page 1.143.

is mounted.
All thermostatic valves "CV 9" have a white


1.52 2017
1
the radiator Thermostatic valves "AF"
kv kv
Packing
unit
P-dev. P-dev.
Thermostatic valves "AF" Valves for thermostats

infinitely adjustable fine presetting connection thread M 30 x 1,5
bronze/brass, nickel plated
Angle pattern valve
Application:
DN 10 0.20 0.32 0.37 (25) 1180603 Central heating and cooling systems with
DN 20 0.20 0.32 0.37 (25) 1180606 aggressive, harmless fluids (e.g. water or
to VDI 2035/NORM 5195).
Straight pattern valve Especially suitable for direct or indirect
connection to district heating circuits.
DN 10 0.20 0.32 0.37 (25) 1180703 Max. operating pressure ps: 16 bar (PN 16)
DN 15 0.20 0.32 0.37 (25) 1180704 Operating temperature ts: 2 C up to 120 C
DN 20 0.20 0.32 0.37 (25) 1180706 (for short periods up to 140 C)
Reversed angle pattern valve Central heating systems with a high

temperature differential and systems requiring
DN 10 0.20 0.32 0.37 (25) 1180903 setting of low flow rates (low flow tolerances)
DN 15 0.20 0.32 0.37 (25) 1180904 for instance up to a maximum kv value of 0.32
at 2 K P-deviation, max. differential pressure
Especially suitable for panel radiators and for 3.0 bar, against which the valves close.
the replacement of KOSMOS fine adjustment
valves type 52 F1 - F7 with vertically pointing All valves DN 10 up to DN 20 are suitable for
handwheel. the installation with copper pipes.

Double angle pattern valve sleeves page 1.143.
DN 10 0.20 0.32 0.37 (25) 1181460 special tool "Demo-Bloc", page 1.47, without
DN 15 0.20 0.32 0.37 (25) 1181462 draining the system.
Right hand side connection Attention: Filling and draining of the system
+ - before the valves are preset and the thermostat
DN 10 0.20 0.32 0.37 (25) 1181461 is mounted.
DN 15 0.20 0.32 0.37 (25) 1181463
All thermostatic valves "AF" have a red
Presetting key protection cap, the gland nut of the valves
for thermostatic valves AF and valve inserts GHF manufactured since end of 1993 has a red
mark.
with pocket 1180791
For the exact control of the presetting of the

Measuring device 1180793 thermostatic valves "AF".

Return flow valves:
2017 1.53
the radiator Thermostatic valves "AF"
kv kv
Packing
unit
P-dev. P-dev.
Thermostatic valves "AF" Valves for thermostats

infinitely adjustable fine presetting connection thread M 30 x 1.5
by using the valve insert (except for item no. 1180957) brass, nickel plated
Straight pattern valve Application:

both ports flat sealing with collar nut G female thread Central heating and cooling systems with
(length 66 mm) closed circuits, for operation with non-
DN 15 0.20 0.32 0.37 (25) 1180955 suitable water and glycol mixtures according
DN 15 0.55 1.05 1.80 (25) 1180957 to VDI 2035/NORM 5195).
Especially suitable for direct or indirect
connection to district heating circuits.
Set 5 = 2 weldable tailpipes Max. operating pressure ps: 20 bar (PN 20)
for valve DN 15 (10) 1060592 (for short periods up to 130 C)
As conversion valve G male thread, flat sealing, These conversion valves (except for
without weldable tailpipes and without collar nuts thermostatic valve "A", item no. 1180957) have
for PRUSS regulating valves no. 120 - " the same regulation characteristics as the
thermostatic valves "AF".
0.20 0.32 0.37 (25) 1180964 Item no. 1180957 is equipped with a valve
Angle pattern valve insert "A".

0.20 0.32 0.37 (25) 1180965
Straight pattern valve (length 80 mm)
0.20 0.32 0.37 (25) 1180967
Straight pattern valve (length 70 mm)
is mounted.
All thermostatic valves "AF" have a red

protection cap.

"Cofit P" Press fittings: Page 11.12
1.54 2017
1
Packing
unit
Accessories
Fittings and cap

for straight pattern and conversion valves
item no.: 1180964/65/67
Weldable nipple (steel)
DN 10 (10) 1010989
DN 15 (10) 1010990
Solder nipple (brass)
12 mm (10) 1010991
15 mm (10) 1010992
Screwed nipple (brass)
R DIN EN 10 226-1 (10) 1010993
Collar nut (brass)
G female thread (10) 1010994
Threaded tailpipe (brass)
G male thread x 12 mm (5) 1010995

Threaded tailpipe (weldable nipple steel)

Cap (brass)
G female thread (10) 1010997
2017 1.55
the radiator Thermostatic valves "ADV 9"
kv kv
Packing
Article at 1K at 2K Article-No. Hint
unit
P-dev. P-dev.
Thermostatic valves "ADV 9" Valves for thermostats

with double function and infinitely adjustable presetting connection thread M 30 x 1.5
Angle pattern valve
Application:
DN 10 0.36 0.67 (25) 1188363 Central heating and cooling systems with
DN 15 0.36 0.67 (25) 1188364 closed circuits, for operation with non-
DN 20 0.36 0.67 (25) 1188366 aggressive, harmless fluids (e.g. water or
to VDI 2035/NORM 5195).
Straight pattern valve Max. operating pressure ps: 10 bar (PN 10)
DN 10 0.36 0.67 (25) 1188463 (for short periods up to 130 C)
DN 15 0.36 0.67 (25) 1188464
DN 20 0.36 0.67 (25) 1188466 The thermostatic valves "ADV 9" are not
suitable for steam installations.
All other thermostatic valves "A, AV 9, AF, CV 9, E, RF and RFV 9"
can also be equipped with the valve insert with double function The double function of these valves provokes
and presetting, item no. 1186002, page 1.109. an automatic closing of the valve to 5 % of the
nominal flow (frost protection) should the
thermostat be removed or destroyed.
Not suitable for use with electric actuators.


Compression fittings: page 1.140, reinforcing

sleeves: page 1.143.
Attention: Before filling and draining the

system, the protection cap has to be opened
by one turn starting from the shut position.
All thermostatic valves "ADV 9" have

a grey-green protection cap with 3
frontal lugs and a grey-green
coloured marking on the bonnet.

1.56 2017
1
the radiator Thermostatic valves "RFV 9"
kv kv
Packing
unit
P-dev. P-dev.
Thermostatic valves "RFV 9" Valves for thermostats

reduced dimensions, infinitely adjustable presetting connection thread M 30 x 1.5
Angle pattern valve
Application:
to VDI 2035/NORM 5195).
DN 15 0.36 0.67 1.00 (25) 1185104
DN 20 0.36 0.67 1.20 (25) 1185106 The thermostatic valves "RFV 9" are not
suitable for steam installations.
Reduced dimensions compared with

"AV 9".
Thermostatic valves "RFV 9" are not suitable

for use in combination with female threaded

sleeves page 1.143.

is mounted.
All thermostatic valves "RFV 9" have a

light green protection cap with 3 frontal lugs.

2017 1.57
the radiator Return flow valves
kv kv
Packing
unit
P-dev. P-dev.
Return flow valves Valves for thermostats

Thermostatic valves "AV 9" connection thread M 30 x 1.5
infinitely adjustable presetting brass, nickel plated
Reversed angle pattern valve for the return pipe Application:

to VDI 2035/NORM 5195).
Straight pattern valve for the return pipe Max. operating pressure ps: 10 bar (PN 10)
Operating temperature ts: 2 C bis 120 C
DN 15 0.36 0.67 1.00 (25) 1183894
Especially suitable for installations with
reversed supply and return pipe and for upright
radiators.
Attention: Reversed supply and return pipe at

the radiator might reduce the capacity.

sleeves page 1.143.

or the Heimeier presetting key.
The return flow valves are not suitable for

use in combination with female threaded
All return flow valves are suitable for the

installation with copper pipes.
The return flow valves "AV 9" have a white

1.58 2017
1.g Valves for manual hydronic balancing 1
"Uniset" Radiator valve sets
the radiator Radiator lockshield valve "Combi 3G"
Packing
unit
"Uniset" Radiator valve sets
"Uniset Pro" - Bi-directional For pumped 2 pipe systems

Thermostatic valve body, liquid ("Uni LGH") thermostat and PN 10 at 120 C max.
Combi 3G lockshield valve Angle nickel plated body having
compression x " BSP union tail to suit copper
15 mm x " BSP tail (50) 1188585 pipe only.
Fully bi-directional.
Certified to EN 215.
"Uniset Pro" - Bi-directional

Thermostatic valve body, liquid (Vindo TGH) thermostat and
Combi 3G lockshield valve
15 mm x " BSP tail (50) 1189785
Radiator lockshield valve "Combi 3G"
"Combi 3G" Angle pattern nickel plated body having

compression x " BSP union tail to suit copper
15 mm x " BSP tail (50) 1098362 pipe only. Pumped 2 pipe systems.
PN 10 at 120 C max.
2017 1.59
the radiator "Demo-Bloc"
Packing
unit

special tool for replacing valve inserts
without draining the system Max. operating pressure ps: 10 bar (PN 10)
Cleaning head for all valves (100) 1188400 The valve seat can be cleaned by use of the
"Demo-Bloc" and the cleaning head.

the valve insert "HRV"

the valve insert "QA"

1.60 2017
1
the radiator 1.h Valves for large flow rates
Page

Content
Thermostatic valves "A" 1.62
Thermostatic valves "A" (male thread) 1.63
Thermostatic valves "AZ V" 1.64
Thermostatic valves "AZ H" 1.64
Thermostatic valves "RF" 1.65
2017 1.61
1 control / Hydronic balancing at 1.h Valves for large flow rates
the radiator Thermostatic valves "A"
kv kv
Packing
unit
P-dev. P-dev.
Thermostatic valves "A" Valves for thermostats

connection thread M 30 x 1.5
Angle pattern valve brass, nickel plated
DN 10 0.50 0.95 1.35 (25) 1181003 Application:

to VDI 2035/NORM 5195).
(for short periods up to 130C)
DN 10 0.50 0.95 1.35 (25) 1181103
DN 15 0.50 0.95 1.35 (25) 1181104 Valves DN 20 up to DN 32, with high kvs value,
DN 20 0.55 1.10 2.50 (25) 1181106 to be used also for zone control as well as in
DN 25 0.55 1.10 3.30 (10) 1181108 one pipe, two pipe and gravity heating sytems.
DN 32 0.55 1.10 4.10 (10) 1181110 Steam 0.5 bar at 110 C.
Reversed angle pattern valve All valve inserts are replaceable by using the
DN 10 0.50 0.95 1.35 (25) 1181403 draining the system.
DN 15 0.50 0.95 1.35 (25) 1181404
DN 20 0.55 1.10 2.20 (25) 1181406 All valves DN 10 up to DN 20 are suitable for
+ - All valves sized DN 15 can also be connected
to the Oventrop composition pipe "Copipe".
DN 10 0.50 0.95 1.35 (25) 1181391
DN 15 0.50 0.95 1.35 (25) 1181393 Compression fittings page 1.140, reinforcing
sleeves page 1.143.
+ - All thermostatic valves "A" have a black
protection cap.
DN 10 0.50 0.95 1.35 (25) 1181390
DN 15 0.50 0.95 1.35 (25) 1181392
- -
+
left +
right

1.62 2017
1
the radiator Thermostatic valves "A" (male thread)
kv kv
Packing
unit
P-dev. P-dev.
Thermostatic valves "A" (male thread) The G male thread of the valves allows for
the connection to copper, precision steel and
with G male threaded pipe connection and plastic pipes as well as the Oventrop
R male threaded radiator connection composition pipe "Copipe" by using the
corresponding fittings.
Angle pattern valve
Fittings page 1.136, compression fittings page
DN 15 0.50 0.95 1.35 (25) 1181097 1.140, reinforcing sleeves page 1.143.
All thermostatic valves "A" have a black

protection cap.
DN 15 0.50 0.95 1.35 (25) 1181197
- -
+
Reversed angle pattern valve
DN 15 0.50 0.95 1.35 (25) 1181492

- Left hand side connection
+
left right
DN 15 0.50 0.95 1.35 (25) 1181396

- For further information see
+
DN 15 0.50 0.95 1.35 (25) 1181397 "Technical information":
2017 1.63
Thermostatic valves "AZ V"
the radiator Thermostatic valves "AZ H"
kv kv
Packing
unit
P-dev. P-dev.
Thermostatic valves "AZ V" Valves for thermostats

Angle pattern valve
Application:
to VDI 2035/NORM 5195).
Operating temperature ts: -10 C up to 120 C
DN 15 0.47 0.92 1.70 (25) 1187604
DN 20 0.47 0.92 2.30 (25) 1187606 With infinitely adjustable valve insert for high
DN 25 0.47 0.92 3.00 (10) 1187608 flow rates.
The thermostatic valves "AZ V" are, amongst

others, used for the zone control in
combination with thermostats or actuators in
central heating and cooling systems.



sleeves page 1.143.
Presetting key, item no. 1068585, page 3.18.
All thermostatic valves "AZ V" have a green

protection cap.
Thermostatic valves "AZ H" Application:

Straight pattern valve closed circuits, for operation with non-
DN 25 0.68 1.35 4.90 (10) 1188408 to VDI 2035/NORM 5195).
Valves with high flow capacity, especially
suitable for zone control as well as one pipe,
two pipe and gravity heating systems.
Not suitable for the installation with

compression fittings.
The valve insert of the thermostatic valves

"AZ H" can not be replaced by using the
special tool "Demo-Bloc".
All thermostatic valves "AZ H" have an orange

protection cap.
1.64 2017
1
the radiator Thermostatic valves "RF"
kv kv
Packing
unit
P-dev. P-dev.
Thermostatic valves "RF" Valves for thermostats

reduced dimensions connection thread M 30 x 1.5
Application:
to VDI 2035/NORM 5195).
Reduced dimensions compared with

thermostatic valves "A".

sleeves page 1.143.
Thermostatic valves "RF" are not suitable for

use in combination with female threaded

copper pipes.
All thermostatic valves "RF" have a blue

protection cap.
Angle pattern valve
DN 10 0.50 0.95 1.35 (25) 1184703 49 mm

DN 15 0.50 0.95 1.35 (25) 1184704 54 mm
DN 20 0.55 1.10 3.50 (25) 1184706 63 mm
DN 10 0.50 0.95 1.35 (25) 1184803 75 mm

DN 15 0.50 0.95 1.35 (25) 1184804 83 mm
DN 20 0.55 1.10 2.50 (25) 1184806 98 mm
2017 1.65
1
the radiator 1.i Thermostatic valve sets
Page
1.i Thermostatic valve sets

Content
Thermostatic valve sets with thermostat "vindo TH" 1.68
Thermostatic valve sets with thermostat "Uni LH" 1.69
Connection sets "Multiflex F" with thermostat "vindo TH" 1.69
2017 1.67
1 control / Hydronic balancing at 1.i Thermostatic valve sets
the radiator Thermostatic valve sets with thermostat "vindo TH"
Packing
unit
Thermostatic valve sets with thermostat "vindo TH" Application:

Angle pattern closed circuits, for operation with non-
consisting of: suitable water and glycol mixtures according
Thermostatic valve "AQ" with "Q-Tech" to VDI 2035/NORM 5195).
for automatic hydronic balancing, Max. operating pressure ps: 10 bar (PN 10)
radiator lockshield valve "Combi 2",
thermostat "vindo TH" Thermostatic valves "AQ":
DN 10 (10) 1713063*
DN 15 (10) 1713064* Thermostatic valves "AV 9", RFV 9", "RF", "A"
and radiator lockshield valve "Combi 2":
consisting of:
Thermostatic valve "AV 9" with infinitely adjustable presetting,
thermostat "vindo TH"
DN 10 (10) 1673703
DN 15 (10) 1673704
consisting of:
Thermostatic valve "A",
DN 10 (10) 1671003
DN 15 (10) 1671004
Straight pattern
consisting of:
Thermostatic valve "AQ" with "Q-Tech"
for automatic hydronic balancing,
DN 10 (10) 1713163*
DN 15 (10) 1713164*
consisting of:
Thermostatic valve "RFV 9" with infinitely adjustable presetting,
DN 10 (10) 1675103
DN 15 (10) 1675104
consisting of:
Thermostatic valve "RF",
radiator lockshield "Combi 2",
DN 10 1672003
DN 15 1672004

1.i Thermostatic valve sets 1
Thermostatic valve sets with thermostat "Uni LH"
the radiator Connection sets "Multiflex F" with thermostat "vindo TH"
Packing
unit
Thermostatic valve sets with thermostat "Uni LH" Application:

consisting of: suitable water and glycol mixtures according
Thermostatic valve "AQ" with "Q-Tech" to VDI 2035/NORM 5195).
radiator lockshield valve "Combi 2", Max. operating pressure ps: 10 bar (PN 10)
thermostat "Uni LH"
Thermostatic valves "AQ":
DN 10 (10) 1703063* Operating temperature ts: 2 C up to 110 C
DN 15 (10) 1703064*
Thermostatic valves "AV 9" and radiator
lockshield valve "Combi 2":
consisting of: (for short periods up to 130 C)
thermostat "Uni LH"
DN 10 (10) 1683703*
DN 15 (10) 1683704*
Straight pattern
consisting of:
Thermostatic valve "AQ" with "Q-Tech"
thermostat "Uni LH"
DN 10 (10) 1703163*
DN 15 (10) 1703164*
consisting of:
DN 10 (10) 1683803*
DN 15 (10) 1683804*
Connection sets "Multiflex F" with thermostat "vindo TH" Application

consisting of: suitable water and glycol
"Multiflex F" ZB angle pattern isolating fitting mixtures according to VDI 2035/NORM
and thermostat "vindo TH" 5195).
for G male thread (10) 1715814* Operating temperature ts: 2 C up to 120 C
for G female thread (10) 1715884* (for short periods up to 130 C)
Straight pattern
consisting of:
"Multiflex" ZB isolating fitting,
for G male thread (10) 1715813*

for G female thread (10) 1715883*

1
the radiator 1.j Exclusive radiator valves
Page

Content
Thermostatic valves "E" 1.72
Design handgrips 1.73
Radiator lockshield valves "Combi E" 1.74
Sets of compression fittings (1-fold) 1.74
T-pieces 1.74
Wall connection sets (1-fold) 1.74
Thermostatic valve sets "E" 1.75
2017 1.71
1 control / Hydronic balancing at 1.j Exclusive radiator valves
the radiator Thermostatic valves "E"
kv kv
at 1K at 2K Packing
Article kvs Article-No. Hint
P- P- unit
dev. dev.
Thermostatic valves "E" Exclusive radiator valves
infinitely adjustable presetting Valves for thermostats
Angle pattern valve DN 15 brass
anthracite 0.36 0.67 1.20 (10) 1163032 Application:

(RAL 7016) Central heating and cooling systems with
sand blasted and 0.36 0.67 1.20 (10) 1163042 closed circuits, for operation with non-
nickel plated aggressive, harmless fluids (e.g. water or
chrome plated 0.36 0.67 1.20 (10) 1163052 suitable water and glycol mixtures according
white (RAL 9016) 0.36 0.67 1.20 (10) 1163062 to VDI 2035/NORM 5195).
gold plated 0.36 0.67 1.20 (10) 1163072 Max. operating pressure ps: 10 bar (PN 10)
stainless steel 0.36 0.67 1.20 (10) 1163082 Operating temperature ts: 2 C up to 120 C
finish (for short periods up to 130 C),
2 C up to 90 C for the white models
and in stainless steel finish.
Straight pattern valve DN 15
Oventrop exclusive thermostatic radiator and
anthracite 0.36 0.67 1.00 (10) 1163132 lockshield valves for an elegant home interior.
(RAL 7016) Technical data and nominal flow rate as
sand blasted and 0.36 0.67 1.00 (10) 1163142 thermostatic valves "AV 9", page 1.50.
nickel plated
chrome plated 0.36 0.67 1.00 (10) 1163152 All valve inserts are replaceable by using the
white (RAL 9016) 0.36 0.67 1.00 (10) 1163162 special tool "Demo-Bloc", page 1.60, without
gold plated 0.36 0.67 1.00 (10) 1163172 draining the system.
stainless steel 0.36 0.67 1.00 (10) 1163182
finish All valves are suitable for the installation with
copper pipes.
Reversed angle pattern valve DN 15
anthracite 0.36 0.67 1.00 (10) 1163232 before the valves are preset and the thermostat
(RAL 7016) is mounted.
chrome plated 0.36 0.67 1.00 (10) 1163252
white (RAL 9016) 0.36 0.67 1.00 (10) 1163262 Awards:
Design Award of
Double angle pattern valve North Rhine Westphalia,
- Award of Honour for Industrial Products
+
Left hand side connection DN 15 Industrial Design Forum Hanover

Award iF
anthracite 0.36 0.67 1.00 (10) 1163432 Design Innovation of
(RAL 7016) Design Centre Essen
chrome plated 0.36 0.67 1.00 (10) 1163452 Award for high Quality of Design
white (RAL 9016) 0.36 0.67 1.00 (10) 1163462
Pragotherm, Prague
stainless steel 0.36 0.67 1.00 (10) 1163482
finish German Institute for Copper Berlin
Award Product and Brass
Right hand side connection DN 15 Admission to The New Collection
- for exemplary Design Munich,
+
anthracite 0.36 0.67 1.00 (10) 1163433 Design Laboratory Museum of Art
(RAL 7016) and Commerce Hamburg and
chrome plated 0.36 0.67 1.00 (10) 1163453 Design Museum London
white (RAL 9016) 0.36 0.67 1.00 (10) 1163463 Thermostats from page 1.08.
stainless steel 0.36 0.67 1.00 (10) 1163483
finish
1.72 2017
1
the radiator Design handgrips
Design handgrips For the manual, infinitely adjustable control of

for thermostatic valves "E", chrome plated the room temperature. They do not contain a
connection thread M 30 x 1.5 thermostatic sensor element.
TARA 1168052 Consisting of handgrip and adapter.
May be fitted onto the chrome plated

thermostatic valves "E".
Max. flow temperature: 75 C
Product and trademark of the company

MADISON 1168152 Alois F. Dornbracht GmbH & Co. KG
Armaturenfabrik.

2017 1.73
Radiator lockshield valves "Combi E"
Sets of compression fittings (1-fold)
T-pieces
the radiator Wall connection sets (1-fold)
Packing
unit
Radiator lockshield valves "Combi E" Technical data as "Combi 4",

page 1.128.
Angle pattern DN 15
Service tool,
anthracite (RAL 7016) (10) 1166032 item no. 1090551, page 1.123.
sand blasted and nickel plated (10) 1166042
white (RAL 9016) (10) 1166062
Straight pattern DN 15
anthracite (RAL 7016) (10) 1167032

sand blasted and nickel plated (10) 1167042
white (RAL 9016) (10) 1167062
Sets of compression fittings (1-fold) Attention:

When installing copper pipes with a wall
for copper pipe according to DIN EN 1057 consisting of: thickness of 1 mm it is necessary to use
compression ring, compression nut, cap reinforcing sleeves for the additional
stabilisation of the pipe. Should the wall
G M x 12 mm sand blasted and nickel 1169392 thickness exceed 1 mm, please contact the
plated pipe manufacturer. Reinforcing sleeves for wall
G M x 15 mm sand blasted and nickel 1169393 thickness = 1 mm, page 1.143.
plated Note: The pipes are not held by the soft sealing
G M x 16 mm sand blasted and nickel 1169394 fitting, they have to be fixed additionally.
plated Regarding stretching of the pipe ends, the
instructions of the pipe manufacturers have to
G M x 12 mm chrome plated 1169092 be observed.
G M x 15 mm chrome plated 1169093
G M x 16 mm chrome plated 1169094 For further information see
G M x 12 mm white (RAL 9016) 1169192
G M x 15 mm white (RAL 9016) 1169193
G M x 16 mm white (RAL 9016) 1169194
G M x 12 mm gold plated 1169292

G M x 12 mm anthracite (RAL 7016) 1169492

G M x 15 mm anthracite (RAL 7016) 1169493
G M x 12 mm stainless steel finish 1169592

G M x 15 mm stainless steel finish 1169593
T-pieces For the installation of heating elements in towel

radiators.
R M x Rp F, connection of heating element G F R p 1/2

white 1167562
G 1/2
Item no . 1167552/62
Wall connection sets (1-fold) For the wall installation of the exclusive radiator
valves.
chrome plated Consisting of: pipe 15 mm white or chrome
plated, L = 150 mm, R male thread EN
DN 15 1169553 10226-1 connection for the wall installation and
compression fittings for the exclusive radiator
white valves.
DN 15 1169563
1.74 2017
1
the radiator Thermostatic valve sets "E"
Thermostatic valve sets "E" Exclusive radiator valves

chrome plated, DN 15
Application:
consisting of: closed circuits, for operation with non-
Angle pattern valve, 1164052 suitable water and glycol mixtures according
angle pattern lockshield valve, to VDI 2035/NORM 5195).
thermostat "Uni SH" Max. operating pressure ps: 10 bar (PN 10)
Oventrop exclusive radiator and lockshield

valves for an elegant home interior.
Straight pattern Technical data and nominal flow rate as

consisting of: thermostatic valves "AV 9", page 1.50.
Straight pattern valve, 1164152 All valve inserts are replaceable by using the
straight pattern lockshield valve, special tool "Demo-Bloc", page 1.60, without
thermostat "Uni SH" draining the system.

copper pipes.
Compression fittings page 1.74.

Double angle pattern
left hand side connection
consisting of:
is mounted.
Double angle pattern valve 1164352
(left hand side connection),
angle pattern lockshield valve,
thermostat "Uni SH"
Double angle pattern

right hand side connection
consisting of:
Double angle pattern valve 1164452

(right hand side connection),
angle pattern lockshield valve,
thermostat "Uni SH"
2017 1.75
1
the radiator 1.k "Multiblock T/ T-RTL" Fittings for radiators with centre connection
Page

Content
"Multiblock T" Two pipe fitting 1.78
"Multiblock TU" One/two pipe fitting convertible 1.78
Design covers 1.79
Connection sets "Multiblock T"/"Uni SH" for towel radiators 1.80
Connection sets "Multiblock T"/"pinox H" for towel radiators 1.80
"Multiblock TFU" One/two pipe fitting convertible 1.81
Connection sets "Multiblock TFU"/"Uni SH" for towel radiators 1.81
"Multiblock T-RTL" 1.82
Connection sets "Multiblock T-RTL"/"Uni SH" 1.83
Connection sets "Multiblock T-RTL"/"pinox H" 1.83
2017 1.77
"Multiblock T" Two pipe fitting
the radiator "Multiblock TU" One/two pipe fitting convertible
kv kv
Packing
unit
P-dev. P-dev.
"Multiblock T" Two pipe fitting "Multiblock T" for use on radiators with supply
Fitting with presetting and isolating and draining facility and return pipe connection.
brass, nickel plated, with soft seal Distance between pipe centres 50 mm.
Installation irrespective of the position of the supply and return pipe Marking "OV 2" on valve body.
To be used:
for the connection to radiators with G male thread for two pipe operation
according to DIN EN 16313 (cone "Euro") as thermostatic valve
as isolating fitting
0.34 0.57 0.81 (5) 1184013 for draining
Straight pattern for filling
Application:
0.34 0.57 0.81 (5) 1184014 closed circuits, for operation with non-
Angle pattern aggressive, harmless fluids (e.g. water or
to VDI 2035/NORM 5195).
for the connection to radiators with Rp female thread Operating temperature ts: 2 C up to 120 C
0.34 0.57 0.81 (5) 1184083 Technical data as thermostatic valves "AV 9".
Straight pattern For the connection of copper, precision steel,
0.34 0.57 0.81 (5) 1184084 Oventrop composition pipe "Copipe", the
Angle pattern Oventrop compression fittings are to be used,
page 1.142.
used.
"Multiblock TU" One/two pipe fitting convertible "Multiblock TU" for use on radiators with
Fitting with presetting, convertible, with isolating facility supply and return pipe connection.
brass, nickel plated, with soft seal Distance between pipe centres 50 mm.
Installation irrespective of the position of the supply and return pipe Supplied for two pipe operation.
Conversion to one pipe operation see
for the connection to radiators with G male thread installation instructions.
according to DIN EN 16313 (cone "Euro") Marking "OV 1+2" on valve body.
To be used:
0.34 0.57 0.81 (5) 1184023 for one or two pipe operation
Straight pattern as thermostatic valve
0.34 0.57 0.81 (5) 1184024 Application:
for the connection to radiators with Rp female thread to VDI 2035/NORM 5195).
0.34 0.57 0.81 (5) 1184033 Operating temperature ts: 2 C up to 120 C
Straight pattern (for short periods up to 130 C)
Technical data as thermostatic valves "AV 9".
kv-/kvs values valid for two pipe operation.
0.34 0.57 0.81 (5) 1184034 Values for one pipe operation see "Technical
Angle pattern information".
stainless steel and plastic pipes as well as
page 1.142.
used.
Award:
"Multiblock T" in combination with
"Uni SH" in stainless steel finish
Design Centre Essen
reddot design award
Design Award of the
Nominated 2009
1.78 2017
1
the radiator Design covers
kv
Packing
Article at 2K Article-No. Hint
unit
P-dev.
Design covers
for "Multiblock T/TU"
Straight pattern
anthracite (5) 1184088

white (5) 1184095
Angle pattern
anthracite (5) 1184089

white (5) 1184096
Special valve insert for reversed supply and return pipe As replacement for:
with presetting "Multiblock T/TU/TFU"
"Unibox E T"
"AV6U" 0.52 (100) 1187077 "Unibox E plus"
"AV9U" 0.57 (100) 1187078 "Unibox E vario"
"Unibox E BV"
In case of reversed direction of flow for:
"Unibox T"
"Unibox TQ"
"Unibox plus" (connection for room
temperature control)
"Unibox vario" (connection for room
"Unibox Q plus" (connection for room

Connection sets "Multiblock T"/"Uni SH" for towel radiators
Connection sets "Multiblock T"/"pinox H" for towel radiators
the radiator (radiators with Rp female thread)
Connection sets "Multiblock T"/"Uni SH" for towel radiators "Multiblock T" for use on radiators with supply
(radiators with Rp female thread) and return pipe connection.
Distance between pipe centres 50 mm.
Straight pattern Marking "OV 2" on valve body.
consisting of: To be used:

-for two pipe operation
"Multiblock T", -as thermostatic valve
connection fitting with presetting, -as isolating fitting
two pipe fitting -for draining
Design cover -for filling
"Uni SH" Thermostat with liquid sensor
"SH-Cap" Application:
white 1184183 closed circuits, for operation with non-
chrome plated 1184283 aggressive, harmless fluids (e.g. water or
stainless steel finish 1184383 suitable water and glycol mixtures according
to VDI 2035/NORM 5195).
Angle pattern
consisting of:
"Uni SH":
"Multiblock T", with '0' setting,
connection fitting with presetting, temperature range 728 C
two pipe fitting graduation on cap 0 1-5
Design cover
"Uni SH" Thermostat with liquid sensor White set:
"SH-Cap" Thermostat "Uni SH" white/chrome plated
white 1184184 "Multiblock T" also available as one/two pipe

chrome plated 1184284 fitting (convertible): page 1.78
stainless steel finish 1184384 Marking "OV 1+2" on valve body.
Connection sets "Multiblock T"/"pinox H" for towel radiators Awards:

(radiators with Rp female thread) "Multiblock T" in combination with
"Uni SH" in stainless steel finish:
Straight pattern Design Centre Essen
reddot design award
consisting of: Design Award of the
"Multiblock T", Nominated 2009
connection fitting with presetting,
two pipe fitting
Design cover "pinox H":
"pinox H" Thermostat with liquid sensor without '0' setting
Temperature range: 7 - 28 C
white 1184185 Graduation on cap: 1 - 5
Angle pattern
consisting of:
"Multiblock T",
two pipe fitting
Design cover
"pinox H" Thermostat with liquid sensor
white 1184186
1.80 2017
1
the radiator "Multiblock TFU" One/two pipe fitting convertible
kv kv
Packing
unit
P-dev. P-dev.
"Multiblock TFU" One/two pipe fitting convertible "Multiblock TFU" for use on radiators with
Fitting with presetting, supply and return pipe connection.
pivoting supply/return pipe connection Distance between pipe centres 50 mm.
with isolating and draining facility To be used:
brass, nickel plated, with soft seal for one or two pipe operation
Installation irrespective of the position of the supply and return pipe as thermostatic valve
for the connection to radiators with G male thread for draining
according to DIN EN 16313 (cone "Euro") for filling
as angle or straight pattern model (pivoting)
0.31 0.47 0.60 (5) 1184025 allowing the connection of the thermostat on
the right or left hand side
Application:
for the connection to radiators with Rp female thread aggressive, harmless fluids (e.g. water or
0.31 0.47 0.60 (5) 1184035 to VDI 2035/NORM 5195).
kv-/kvs values valid for two pipe operation.
Design covers Values for one pipe operation see "Technical
for "Multiblock TFU" information".
white (5) 1184092 stainless steel and plastic pipes as well as
chrome plated (5) 1184093 Oventrop composition pipe "Copipe", the
page 1.142.
used.

Connection sets "Multiblock TFU"/"Uni SH" for towel radiators Application:

(radiators with Rp female thread) Central heating and cooling systems with
Swivelling supply/return pipe connection aggressive, harmless fluids (e.g. water or
consisting of: to VDI 2035/NORM 5195).
Max. operating pressure: ps: 10 bar (PN 10)
"Multiblock TFU" connection fitting Operating temperature ts: 2 C up to 120 C
with presetting, one/two pipe fitting (for short periods up to 130 C)
Design cover
"Uni SH" Thermostat with liquid sensor
"SH-Cap"
"Uni SH":
white 1184135 with '0' setting,
chrome plated 1184235 temperature range 728 C
graduation on cap 0 1-5
White set:
Thermostat "Uni SH" white/chrome plated
2017 1.81
"Multiblock T-RTL"
the radiator Design cover
Packing
unit
"Multiblock T-RTL" "Multiblock T-RTL" for simultaneous

Connection fitting for the combination of radiator connection of radiators with supply and return
and surface temperature balance, two pipe fitting, connection and 50 mm distance between pipe
with presetting, isolating facility and integrated centres as well as surface temperature
return temperature limiter, with soft seal, angle pattern, balance.
brass, nickel plated, For separate control of room and return
including mounting aid temperature (limitation).
for the connection to radiators with G male thread To be used:

according to DIN EN 16313 (cone "Euro") - for two pipe operation
- as thermostatic valve at the radiator
1184016 - as isolating fitting at the radiator
- for surface temperature balance by
for the connection to radiators with Rp female thread
Application:
1184086 Central heating systems with closed circuits,
Design cover
5195).
for "Multiblock T-RTL" and "Multiblock TQ-RTL" Operating temperature ts: 2 C up to 70 C
white 1184087
System illustration:
page 1.142.

connection to G male thread according
used.
The supply and return connections must be

Supply pipe heating
Multiblock T-RTL/
Multiblock TQ-RTL strictly observed to guarantee a perfect
function of the fitting.
Surface heating
Rosette cover
for "Multiblock T-RTL" and "Multiblock TQ-RTL"

white 1189087
Block for initial operation The surface circuit can be filled, drained, bled
for "Multiblock T-RTL" and "Multiblock TQ-RTL" and leak tested with installed block for intitial
operation.
1184094
Mounting aid Used for the pre-assembly and fixing of the

for "Multiblock T-RTL" and "Multiblock TQ-RTL" pipes of the heating circuit and the surface
heating.
(5) 1189094
1.82 2017
1.k "Multiblock T/ T-RTL" Fittings for radiators with centre connection 1
Connection sets "Multiblock T-RTL"/"Uni SH"
the radiator Connection sets "Multiblock T-RTL"/"pinox H"
Connection sets "Multiblock T-RTL"/"Uni SH"

for the combination of towel radiators (with Rp female thread)
and surface heating
Angle pattern "Multiblock T-RTL" for simultaneous

connection of radiators with supply and return
consisting of: connection and 50 mm distance between pipe
centres as well as surface heating.
"Multiblock T-RTL" For separate control of room and return
connection fitting with presetting, temperature (limitation).
isolating facility and integrated
return temperature limiter, two pipe To be used:
fitting, including mounting aid - for two pipe operation
Design cover - as thermostatic valve at the radiator
"Uni SH" Thermostat with liquid sensor - as isolating fitting at the radiator
"SH-Cap" - for surface temperature balance by
white 1184188
chrome plated 1184288 Application:
5195).
"Uni SH":
with '0' setting
Graduation on cap: 0 1 - 5
Connection sets "Multiblock T-RTL"/"pinox H"

for the combination of towel radiators (with Rp female thread)
and surface heating
Angle pattern
consisting of:
"Multiblock T-RTL"
isolating facility and integrated
return temperature limiter, two pipe "pinox H":
fitting, including mounting aid without '0' setting
Design cover Temperature range: 7 - 28 C
"pinox H" Thermostat with liquid sensor Graduation on cap: 1 - 5
white 1184189
2017 1.83
1
the radiator 1.l Valve sets, components and accessories for for two pipe heating systems
Page
OV 2 Content
"Bypass-Combi Duo" two pipe with shut off 1.86
"Duo" Two pipe connection piece with shut off 1.86
Connection pieces 1.86
"Duo" Two pipe connection piece without shut off 1.87
Two pipe radiator valve with insertion tube with shut off 1.87
2017 1.85
"Bypass-Combi Duo" two pipe with shut off
"Duo" Two pipe connection piece with shut off
the radiator Connection pieces
kv kv
Packing
unit
P-dev. P-dev.
"Bypass-Combi Duo" two pipe with shut off Valves / Valves for two pipe heating systems
comprising the following components: connection thread M 30 x 1.5
Thermostatic valves "A"
Application:
Reversed angle pattern valve Central heating and cooling systems with
to VDI 2035/NORM 5195).
Double angle pattern valve Operating temperature ts: 2C up to 120C
+ - Right hand side connection (for short periods up to 130C)
DN 15 0.50 0.95 1.35 (25) 1181393

+ -
DN 15 0.50 0.95 1.35 (25) 1181392
or
straight pattern valve with pipe elbow DN 15
0.50 0.95 1.35 (25) 1181304

"A"
OV 2 OV 2
0.36 0.67 1.00 (25) 1184005

The male threads G according to DIN EN
"AV 9"
16313 (cone "Euro") of the two pipe connection
pieces "Duo" allow for the connection to
Connecting pipe copper, precision steel and plastic pipes as
steel, chrome plated well as the Oventrop composition pipe
"Copipe" by using the corresponding fittings,
15 x 560 mm long 1016951
page 1.142.
15 x 1120 mm long 1016953
15 x 2000 mm long 1016954
"Ofix CEP" Compression fittings

2-fold, for connecting pipe, metal to metal sealing
G x 15 mm (50) 1016853
"Duo" Two pipe connection piece with shut off Distance between pipe centres 50 mm.
(25) 1013361
OV 2
DN 15 G male thread
Connection pieces The "h" fitting G x G x G is suitable for

nickel plated the installation of plastic, precision steel,
copper and Oventrop composition pipe
h fitting "Copipe" in combination with all Oventrop
without collar nut thermostatic radiator and lockshield valves
DN 15 (Rp F), distance between pipe
GMxGMxGM (10) 1028750 centres 50 mm.
with collar nut
GFxGMxGM (10) 1028851

2
o v e n tr o p
3
4
Item no. 1028851 for the connection of valves

with male thread G .
"Unofix" System for refurbishment of one pipe heating systems: Pages 1.99, 3.54
Single fittings: Page 1.141
1.86 2017
"Duo" Two pipe connection piece without shut off 1
Two pipe radiator valve with insertion tube with shut off
the radiator Valve for "TKM" system
kv
Packing
unit
P-dev.
"Duo" Two pipe connection piece without shut off Application:

or with shut off and infinitely adjustable presetting Central heating and cooling systems with
with brass fitting closed circuits, for operation with non-
DN 15 M 24 x 1.5 M suitable water and glycol mixtures according
to VDI 2035/NORM 5195).
without shut off (25) 1182551 Max. operating pressure ps: 10 bar (PN 10)
OV2
with shut off (25) 1182651

OV2 and infinitely adjustable presetting
Compression fittings Ofix M 24 x 1.5: page 1.91.
Two pipe radiator valve with insertion tube with shut off Application:
to VDI 2035/NORM 5195).
The insertion tube is 150 mm long, 11 mm,
distance between pipe centres 50 mm.
with vertical insertion tube
DN 15 G M 0.90 1183581 Marking:

2 grooves on the front face of the lateral
isolating stem.
with horizontal insertion tube
DN 15 G M 0.90 1643561 Marking "OV 2" on valve body.
Valve for "TKM" system These valves are required for the connection of
radiators of the "TKM" system.
Two pipe valve The two pipe valve has an anthracite protection
cap.
DN 15 G M 0.90 (20) 1183661 Characteristic: 2 grooves on front face of the
lateral isolating stem.
Angle pattern fitting For the connection to G male thread
according to DIN EN 16313 (cone "Euro").
G c/nut x G M (10) 1189361
2017 1.87
1
the radiator 1.m Valve sets, components and accessories for one pipe heating systems
Page
Content
"Bypass-Combi Uno" one pipe 1.90
"Uno" One pipe connection piece 1.90
"Uno" One pipe connection piece M 24 x 1.5 1.91
"Ofix" Compression fittings M 24 x 1.5 1.91
"Cofit S" Compression fittings M 24 x 1.5 1.91
Plastic rosette cover 1.91
Radiator valve with insertion tube with fixed bypass and shut off 1.92
Three-way conversion valves 1.93
Accessories 1.93
Isolation fittings 1.94
S-connection fitting, flat sealing 1.95
Tailpipe sets 1.95
2017 1.89
"Bypass-Combi Uno" one pipe
the radiator "Uno" One pipe connection piece
kv kv
Packing
unit
P-dev. P-dev.
"Bypass-Combi Uno" one pipe Valves / Valves for one pipe heating systems
with infinitely adjustable bypass and shut off connection thread M 30 x 1.5
comprising the following components: brass, nickel plated
Thermostatic valves "A" Application:

One pipe central heating and cooling systems
Reversed angle pattern valve with closed circuits, for operation with non-
to VDI 2035/NORM 5195).
One pipe heating systems with outputs up to
8.000 Watt per circuit.
Double angle pattern valve Max. operating pressure ps: 10 bar (PN 10)
+ - Right hand side connection Operating temperature ts: 2 C up to 120 C
DN 15 0.50 0.95 1.35 (25) 1181393

+ -
DN 15 0.50 0.95 1.35 (25) 1181392
or
straight pattern valve with pipe elbow DN 15
0.50 0.95 1.35 (25) 1181304

"A"
OV 1 OV 1
Connecting pipe
steel, chrome plated
The male threads G according to DIN EN
15 x 560 mm long 1016951 16313 (cone "Euro") of the one pipe connection
15 x 1120 mm long 1016953 pieces "Uno" allow for the connection to
15 x 2000 mm long 1016954 copper, precision steel and plastic pipes as
well as Oventrop composition pipes
"Ofix CEP" Compression fittings "Copipe" by using the corresponding
2-fold, for connecting pipe, metal to metal sealing fittings, page 1.141.
G x 15 mm (50) 1016853
"Uno" One pipe connection piece A special radiator isolating fitting at the
with infinitely adjustable bypass and shut off distributor, item no. 1013161, prevents even
small capacity radiators from self convection
with radiator isolating fitting heating.
Radiator share: 35 % (factory
OV 1 DN 15 (25) 1013161 setting), adjustable between 20 and 50%.
G male thread Marking "OV 1" on valve body.
with brass fitting
DN 15 (25) 1013162
G male thread
reversed direction of flow With reversed direction of flow (return radiator

with radiator isolating fittings side) compared with item no. 1013161 and
1013162.
DN 15 (25) 1013164 Marking "OV 1-U" on valve body.
G male thread
1.90 2017
"Ofix" Compression fittings M 24 x 1.5 1
"Cofit S" Compression fittings M 24 x 1.5
the radiator Plastic rosette cover
Packing
unit
"Uno" One pipe connection piece M 24 x 1.5 Application:

without shut off with fixed bypass or One pipe central heating and cooling systems
with shut off and infinitely adjustable bypass with closed circuits, for operation with non-
with brass fitting aggressive, harmless fluids (e.g. water or
DN 15 M 24 x 1.5 male thread to VDI 2035/NORM 5195).
One pipe heating systems with outputs up to
without shut off (25) 1182051 8.000 Watt per circuit.
with fixed bypass Max. operating pressure ps: 10 bar (PN 10)
OV1

Radiator share: 50 %
with shut off (25) 1182151
OV1
and infinitely adjustable bypass
"Ofix" Compression fittings M 24 x 1.5 Attention: When installing copper pipes with a
brass, collar nut nickel plated wall thickness of 1 mm, it is necessary to use
reinforcing sleeves for the additional
Ofix K 2-fold for plastic pipes, stabilisation of the pipe. Should the wall
metal to metal sealing plus O-ring thickness exceed 1 mm, please contact the
pipe manufacturer. Reinforcing sleeves for wall
14 x 2 mm (10) 1016823 thickness = 1 mm, see page 1.143.
16 x 2 mm (10) 1016824 Note: The pipes are not held by the soft sealing
fitting, they have to be fixed additionally.
Regarding stretching of the pipe ends, the
Ofix CEP 2-fold for copper pipes according to DIN EN 1057, instructions of the pipe manufacturers have to
metal to metal sealing be observed.
15 mm (50) 1016813
"Cofit S" Compression fittings M 24 x 1.5

universal application for composition pipe and, provided similar
preparation is used, for plastic pipes (PE-X pipes), 2-fold,
metal to metal sealing plus O-ring,
brass, collar nut nickel plated
14 x 2 mm (10) 1507854
16 x 2 mm (10) 1507855
Plastic rosette cover

flat, distance between pipe centres 35 mm
14 - 16 mm (25) 1016684
Pipework connection systems: Pages 1.140, 3.45
2017 1.91
Radiator valve with insertion tube with fixed bypass and shut off
Valve for "TKM" system
the radiator Angle pattern fitting
kv kv
Packing
unit
P-dev. P-dev.
Radiator valve with insertion tube with fixed bypass and shut off Application:
One pipe central heating and cooling systems
with horizontal insertion tube with closed circuits, for operation with non-
DN 15 1.50 1.80 2.60 1183561 suitable water and glycol mixtures according
G male thread to VDI 2035/NORM 5195).
The fixed bypass of the radiator valves with

insertion tube is adjusted to a radiator flow
share of 35 % (factory setting) at 2K
P-deviation.
The insertion tube is 150 mm long, 11 mm,
distance between pipe centres 50 mm.
with vertical insertion tube The one pipe radiator valve with vertical
insertion tube is especially suitable for towel
DN 15 1.50 1.80 2.20 1183571 radiators. (The technical instructions of the
G male thread radiator manufacturers have to be observed.)
Valve for "TKM" system Radiator share: 50 %

The valves are required for the connection of
One pipe valve radiators of the "TKM" system.
The one pipe valve has an orange protection
DN 15 1.22 1.50 1.80 (20) 1183671 cap.
G male thread
Angle pattern fitting For the connection to G male thread

G c/nut x G M (10) 1189361
1.92 2017
1.m Valve sets, components and accessories for one pipe heating systems 1
Three-way conversion valves
Packing
unit
Three-way conversion valves Three-way conversion valves and

- connection thread M 30 x 1.5 accessories
+
bronze/brass, nickel plated, for the conversion of vertical one pipe heating
with presetting systems to thermostatic systems.
DN 15 (25) 1180584 The Oventrop three-way conversion valves

Left hand side connection have the same dimensions as the manual
DN 15 (25) 1180585 radiator valves according to TGL 43191
Right hand side connection (models A, B, C, D).
Application:
DN 20 (25) 1180586 One pipe entral heating and cooling systems
Left hand side connection with closed circuits, for operation with non-
DN 20 (25) 1180587 aggressive, harmless fluids (e.g. water or
Right hand side connection suitable water and glycol mixtures according
to VDI 2035/NORM 5195).
Accessories
Presetting key
with pocket One pipe systems with top and bottom
connection at the radiator may experience a
for three-way conversion valve 1010599 slight warming up of the radiator even with the
with presetting valves being closed, all depending on the size
of the radiator, the type of radiator and the flow
temperature. This warming up is system related
Fittings, flat sealing and cannot be eliminated by using thermostatic
to the radiator radiator valves. Isolation fittings to reduce this
warming up: page 1.94.
DN 15 (25) 1019394
(R male / collar nut G female) All three-way conversion valves have a yellow
DN 20 (25) 1019396 protection cap, the gland nut has a yellow
(R male / collar nut G 1 female) marking since end of 1993.
to the bypass pipe For further information see

DN 15 (25) 1019384
(G female / collar nut G female)
DN 20 (25) 1019386
(G female / collar nut G 1 female)
- to the pipework -
DN 15 (25) 1019374
(weldable tailpipe / collar nut G female)
DN 20 (25) 1019376
(weldable tailpipe / collar nut G 1 female)
Isolating fitting, flat sealing

45 mm
DN 15 (25) 1016194
(G male / collar nut G female)
DN 20 (25) 1016196
(G 1 male / collar nut G 1 female)
Compensating fittings, flat sealing

45 mm
DN 15 (25) 1016394
79 mm
DN 15 (25) 1019194
DN 20 (25) 1019196
(G male / collar nut G 1 female)
2017 1.93
1 control / Hydronic balancing at 1.m Valve sets, components and accessories for one pipe heating systems
the radiator Isolation fittings
Packing
unit
Connection sets
The connection set with bypass consists of a full exchange pack of all
the fittings required in front of the radiator. These components are
required in combination with the three-way conversion valves and
isolating fittings.
Centre distance 552 mm DN 15 1010558

Valve insert with presetting Old model.
suitable for three-way conversion (25) 1017056

valves with connection thread M
30 x 1.0
Isolation fittings
to reduce heat transfer between valve/T-piece and radiators of vertical -
+
one pipe installations.
The isolation fittings are supplied as a set for the top and the bottom
connection of the radiator.
Isolation loop and shut off set
DN 15 (25) 1016284
(G collar nut x G male thread)
DN 20 (25) 1016286
(G 1 collar nut x G 1 male thread) -
+
The isolation loop and shut off set are suitable for radiators with
welded fitting.
Isolation tailpipe (set)

(reduced dimension tailpipe and collar nut)
DN 15 (25) 1016295
DN 20 (25) 1016297 -
+
(G 1 collar nut x G male thread)
Isolation-compensation-shut off set
DN 15 (25) 1016254
DN 20 (25) 1016256
(G 1 collar nut x G male thread)
The conversion from manual to thermostatic
Refer to installation instructions. radiator valves and the installation of all a. m.
components should be supervised by a
qualified design engineer or plumber.
1.94 2017
1.m Valve sets, components and accessories for one pipe heating systems 1
S-connection fitting, flat sealing
the radiator Tailpipe sets
Packing
unit
S-connection fitting, flat sealing

including radiator tailpipe (G collar nut x R male thread)
DN 15 (10) 1019497
(G male thread x G collar nut)
DN 20 (10) 1019498
(G male thread x G 1 collar nut) The S-connection fitting is suitable for the
replacement of radiators using existing
pipework. The max. distance between pipe
Tailpipe sets centres is 2 x 32 mm = 64 mm.
(2 pieces each)
Set 5 = 2 weldable tailpipes
for valve DN 15 (10) 1060592

for valve DN 20 (10) 1060593
Set 7 = 2 male threaded tailpipes
R for valve DN 15 (10) 1061492

R for valve DN 20 (10) 1061493
Set 8 = 2 female threaded tailpipes
Rp for valve DN 15 (10) 1061392

Rp for valve DN 20 (10) 1061393
2017 1.95
1
the radiator 1.n "Unofix" Refurbishment of one pipe heating systems
Page

Content
Accessories 1.100
2017 1.97
1 control / Hydronic balancing at 1.n "Unofix" Refurbishment of one pipe heating systems
the radiator System illustrations
System illustrations
Unofix QB consisting of:

valve "Cocon QTZ", item no. 1145...
plastic cover plug, item no. 1146091
controlled standard pump

or high-efficiency pump
System illustration Unox QB
Unofix QR consisting of:

valve Cocon QTZ, item no. 1145...
distance piece, item no. 114909.
thermostat Uni RTLH 10-70C, item no. 1149068
controlled standard pump or high-efficiency pump controlled standard pump

or high-efficiency pump
System illustration Unox QR
Rooms supplied by the riser must belong to one residential unit!

Unofix QT consisting of:
valve Cocon QTZ, item no. 1145...
electrothermal actuator (two point), item no. 101241.
room thermostat, item no. 115256.
controlled standard pump of high-efficiency pump
System illustration Unox QT
1.98 2017
1.n "Unofix" Refurbishment of one pipe heating systems 1
"Cocon QTZ" Pressure independent control valves PN 16
the radiator "Aktor T" Electrothermal actuators
Control Packing
range unit
"Cocon QTZ" Pressure independent control valves PN 16 The system is used for the refurbishment of
connection thread M 30 x 1.5 one pipe heating systems with horizontal or
both ports connections for measuring technique "classic" vertical heating circuits.
(closed with blind plugs)
Application:
Inlet port: coupling, outlet port: female thread Central heating and cooling systems with
DN 15 30 - 210 l/h (10) 1145504 aggressive, harmless fluids (e.g. water or
DN 15 90 - 450 l/h (10) 1145604 suitable water and glycol mixtures according
DN 15 150 - 1050 l/h (10) 1145704 to VDI 2035/NORM 5195).
DN 20 150 - 1050 l/h (10) 1145506 Max. operating pressure ps: 16 bar (PN 16)
DN 20 180 - 1300 l/h (10) 1145606 Operating temperature ts: -10 C up to +120 C
Oventrop pressure indepedent control valves

"Cocon QTZ" control the room temperature
with the help of actuators or limit the return
both ports with connections for "classic" measuring technique
temperature with the help of the thermostat
"Uni RTLH" (with distance piece item no.
both ports male thread
114909.) The max. flow rate is set to the
DN 10 30 - 210 l/h (10) 1145563 required nominal value and is constantly
DN 10 90 - 450 l/h (10) 1145663 maintained within the necessary proportional
DN 15 30 - 210 l/h (10) 1145564 band.
DN 15 90 - 450 l/h (10) 1145664 All valves DN 15 and DN 20 are suitable for the
DN 15 150 - 1050 l/h (10) 1145764 installation with copper pipes.
DN 20 150 - 1050 l/h (10) 1145566
DN 20 180 - 1300 l/h (10) 1145666 Model one port with coupling, one port with
female thread:
sleeves page 1.143.
Model both ports male thread:

DN 10: G male threaded connection,
flat sealing
DN 15: G male threaded connection for
compression fittings "Ofix", pages
1.140, 1.141 and 1.143.
With insert item no. 1661100 (page 1.125)
suitable for flat sealing tailpipes.
DN 20: G 1 male threaded connection for
compression fittings, page 9.31.
With insert item no. 1650793 (page 3.59)
Further models page 3.54.
"Aktor T 2P" Electrothermal actuators (two point) actuators serve to control the room
"H NC", closed with current "off", 230 V 1012415 integrated distributor, radiant ceiling panels,
"L NC", closed with current "off", 24 V 1012416 chilled ceiling systems and induction air
systems in combination with two point room
thermostats.
Further applications in bivalent heating
installations.
Tailpipe sets: Page 3.58

Flexible hoses: Page 3.62

Room thermostat - flush mounting
Packing
unit
"Uni RTHL" Thermostat

anthracite (10) 1149068 With '0' setting,

may be limited or locked.
Temperature range:
10 C - 70 C
The thermostats "Uni RTLH" may also be used
in combination with the pressure independent
control valves "Cocon QTZ" (with distance
piece 114909.) for the limitation of the return
temperature in one pipe risers.
Room thermostat - flush mounting With LCD display and adjustable timed
digital programme.

24 V (40) 1152562
Operating current range (item no. 1152561):
100 up to 230 V AC
Heating:
Accessories
Plastic cap (10) 1146091 Cap for the protection of the control unit at full
connection thread M 30 x 1.5 lift position. Is required if no actuator has been
mounted.
Distance piece for the optimisation of the

Distance piece (10) 1149090 return temperature in one pipe heating
with fixed minimum piston stroke systems. Especially advantageous when using
condensing appliances or for district heating
systems. The distance piece is installed
between the "Cocon QTZ" DN 10 up to DN 32
and the thermostat "Uni RTLH". A minimum
flow rate of about 20% of the max. adjustable
nominal value is maintained.
Minimum piston stroke infinitely adjustable,

Distance piece (10) 1149091 with recognition of the closing dimension. The
with adjustable minimun piston stroke required minimum flow rate can be set with the
help of the scale.
Can be used for "Cocon QTZ" DN 10 up to
DN 20.
1.100 2017
1
the radiator 1.o Valve inserts for radiators with integrated distributor
Page

Content
Valves inserts with "Q-Tech" 1.102
Valve inserts (M 30 x 1.5) 1.104
Valve inserts (squeeze connection) 1.106
2017 1.101
1 control / Hydronic balancing at 1.o Valve inserts for radiators with integrated distributor
the radiator Valves inserts with "Q-Tech"
Valves inserts with "Q-Tech" Application:

for automatic hydronic balancing, Central heating systems with closed circuits,
infinitely adjustable presetting, with G male thread for operation with non-aggressive, harmless
and thermostat connection M 30 x 1.5 fluids (e.g. water or suitable water and glycol
(in preparation) mixtures according to VDI 2035/NORM
5195).
GHQ 1019080 Max operating pressure: ps: 10 bar (PN 10)
with front connection Operating temperature ts: 2 C up to 110 C
Function:
The valve inserts with "Q-Tech" are
combined control and regulating inserts
GHQ 1019083 control in combination with thermostats with
with internal O-ring liquid sensor or actuators. The
max. flow rate is set to the required nominal
value and is constantly maintained within the
The valve inserts are designed for the

GHQ 1019082 installation into the valve bodies of integrated
with seat diameter 16 H 11 distributors (e.g. panel radiators).

presetting key supplied with the valve inserts.
The valve inserts "GHQ" are not suitable for

steam installations.
All valve inserts "GHQ" have a light grey

protection cap.
Please observe installation instructions!
The valve insert item no. 1019080 is suitable

for the radiator types, e.g.:
- Arbonia - DiaNorm - Purmo

(up to 2002)
- Baufa - Dia-therm - Radson
- bremo - HM-radiator - Rettig
- DEF - Hoval - Runtal
- Demrad - Manaut
(up to end of 2010)

- Caradon - Henrad - Schfer

- DURA - Korado - Superia (since 2005)
- Ferroli/IMA - Brugman - Thor (since 2005)
(since 2013)
- Vasco

- De Longhi -Ribe
- Veha -Brugman (up to 2013)
(Suject to technical modifications of the
radiator manufacturers)
1.102 2017
1
the radiator Valves inserts with "Q-Tech"
Thermostat connection: squeeze connection Please observe installation instructions!
GDQ 1019099* The valve insert item no. 1019099 is suitable

with front connection for the radiator types, e.g.:
- Arbonia - DiaNorm1 - Baufa

(up to 2002)
- bremo - Dia-therm- Radson1
- HM-Heizkrper- Rettig1 - DEF
- Hoval - Runtal - Demrad
- Manaut - Purmo1
1(up to end of 2010)
The valve insert item no 1019084 is suitable

GDQ 1019084* for the radiator types, e.g.:
with internal O-ring -Brtje (since 2003)-Ferroli/IMA-Schfer
-Caradon -Henrad -Superia
-DURA -Korado -Brugmann
(since 2013)
-Vasco

GDQ 1019086* for the radiator types, e.g.:
with seat diameter 16 H 11
-De Longhi -Thor
-Brugmann (up to 2013) -Ribe -VEHA
-Brtje (since approx. 1994 up to approx. 2003)
(Subject to technical modifications of the

the radiator Valve inserts (M 30 x 1.5)
kv kv
Packing
unit
P-dev. P-dev.
Valve inserts (M 30 x 1.5) Application:

5195).
Operating temperature 2 C bis 120 C
Flow temperature up to 120 C.
installation into the valve bodies of integrated
distributors (e. g. panel radiators).
The valve inserts are presettable to suit the
hydronic requirements of the heating system.
The hydronic values of the valve inserts GH
GH
correspond to the values of the inserts of the
with 6 presetting positions
company Heimeier.
with G male thread
The valve inserts are suitable for the
and thermostat connection M 30 x 1.5
thermostats "Uni XH", "Uni XHM",
with front connection
"Uni XHT", "Uni LH", "Uni LHB", "Uni LHZ",
Protection cap: white
"Uni SH", "Uni CH", "vindo TH" and
0.35 0.70 1.05 (25) 1018080 "pinox H" (pages 1.08 - 1.11).
Brass Attention: Filling and draining of the system
0.35 0.70 1.05 (25) 1018280 before the valves are preset and the thermostat
Stainless steel is mounted.
The valve inserts item no. 1018080, 1018280,

GHF
1018090 and 1648077 are suitable for the
with fine presetting
radiator types, e.g.:
with G male thread
-Arbonia (up to 2002)-DiaNorm -Purmo
-Baufa -Dia-therm -Radson
-bremo -HM-Heizkrper-Rettig
Protection cap: red
-DEF -Hoval -Runtal
-Demrad -Manaut
0.20 0.32 0.37 (25) 1018090
(up to end of 2010)
GH Is used for reversed supply and return pipe.
with 6 presetting positions Attention: The radiator output can be reduced
with G male thread when using this insert.
Protection cap: white
0.35 0.63 1.00 (25) 1648077
GH The valve inserts item no. 1018082,

with 6 presetting positions 1018282 and 1018097 are suitable
with G male thread for the radiator types, e.g.:
and thermostat connection M 30 x 1.5 -De Longhi -VEHA
with seat diameter 16 H 11 -Ribe
Protection cap: white (Subject to technical modifications of the
0.35 0.70 1.05 (25) 1018082
Brass
0.35 0.70 1.05 (25) 1018282
Stainless steel model
GHF
with G male thread
with seat diameter 16 H 11
Protection cap: red
0.20 0.32 0.37 (25) 1018097
1.104 2017
1
the radiator Valve inserts (M 30 x 1.5)
kv kv
Packing
unit
P-dev. P-dev.
GH The valve inserts item no. 1018083,

with 6 presetting positions 1018283 and 1018098 are suitable
with G male thread for the radiator types, e.g.:
with internal O-ring -Caradon -Henrad -Schfer
Protection cap: white -DURA -Korado -Superia (since 2005)
-Ferroli/IMA -Brugman -Thor (since 2005)
0.35 0.70 1.05 (25) 1018083 (since 2013)
Brass -Vasco
0.35 0.70 1.05 (25) 1018283
Stainless steel (Subject to technical modifications of the
GHF
with G male thread
with internal O-ring
Protection cap: red
0.20 0.32 0.37 (25) 1018098

for valves "AV 6, ADV 6, RFV 6, E", insert.
V6 fittings "Multiblock T/TU/TFU/T-RTL" The presetting key fits only in one position.
123
(manufactured up to 2015) and valve inserts GH
1 2
3
6
4
SW 13
5

Presetting key
for thermostatic valves AF and valve inserts GHF
with pocket 1180791
Valve insert Attention: Filling and draining of the system

with thread M 20 x 1.0 before the valves are preset and the thermostat
and thermostat connection M 30 x 1.5 is mounted.
Replacement for item no. 1879800 (M 30 x 1.0)
e. g. Buderus/Brtje 1982 - 1986 (25) 1879850
Further valve inserts for other types of radiators are prepared or

are available on request.
2017 1.105
the radiator Valve inserts (squeeze connection)
kv kv
Packing
unit
P-dev. P-dev.
Valve inserts (squeeze connection) Application:

GD for operation with non-aggressive, harmless
with 8 presetting positions fluids (e.g. water or suitable water and glycol
with G male thread mixtures according to VDI 2035/NORM
and squeeze connection 5195).
with front connection Max. operating pressure ps: 10 bar (PN 10)
Protection cap: white Operating temperature 2 C bis 120 C
0.32 0.63 1.05 (25) 1018099
installation into the valve bodies of integrated
GD distributors (e.g. panel radiators).
with 8 presetting positions
with G male thread The valve inserts are presettable to suit the
and squeeze connection hydronic requirements of the heating system.
with external O-ring
with seat diameter 16 H 11 The hydronic values of the valve inserts GD
Protection cap: white correspond to the values of the inserts of the
competitors.
0.32 0.63 1.05 (25) 1018086 The valve inserts are suitable for the
thermostats Uni XD, Uni LD, vindo TD
GDF and "pinox D" ( pages 1.13 - 1.14).
with 8 fine presetting positions Presetting of the valve inserts GD and GDF is
with G male thread carried out by hand.
and squeeze connection
with external O-ring Attention: Filling and draining of the system
with seat diameter 16 H 11 before the valves are preset and the thermostat
Protection cap: red is mounted.
0.14 0.24 0.47 (25) 1018096
GD for the radiator types, e.g.:
with 8 presetting positions -Arbonia (up to 2002)-DiaNorm1 -Purmo1
with G male thread -Baufa -Dia-therm -Radson1
and squeeze connection -bremo -HM-Heizkrper-Rettig1
with internal O-ring -DEF -Hoval -Runtal
Protection cap: white -Demrad -Manaut
1(up to end of 2010)
0.32 0.63 1.05 (25) 1018084

The valve inserts item no. 1018086 and
1018096 are suitable for the radiator types,
GDF
e.g.:
with 8 fine presetting positions
-De Longhi -Thor -Brugmann (up to 2013)
with G male thread
-Ribe -VEHA
and squeeze connection
-Brtje (since approx. 1994 up to approx. 2003)
with internal O-ring
Protection cap: red
The valve inserts item no. 1018084 and
0.14 0.24 0.47 (25) 1018094 1018094 are suitable for the radiator types,
e.g.:
-Brtje (since -Ferroli/IMA-Schfer
2003)
-Caradon -Henrad -Superia (since
2005)
-DURA -Korado -Brugmann (since
2013)
-Vasco
(Subject to technical modifications of the
1.106 2017
1
the radiator 1.p Valve inserts
Page
1.p Valve inserts

Content
(for valves manufactured up to 1998)
2017 1.107
1 control / Hydronic balancing at 1.p Valve inserts
the radiator Valve inserts for valves with connection thread M 30 x 1.5
kv
Packing
unit
P-dev.
Valve inserts for valves with connection thread M 30 x 1.5 All valve inserts are replaceable with the help of
the special tool "Demo-Bloc" without draining
the system. Valve inserts for radiators
with integrated distributors page 1.104.
"AV 9, CV 9, RFV 9, E" Also for "Hycocon ETZ" (manufactured since
and "Multiblock T-RTL" (manufactured since 2016) 2016).
0.67 (100) 1187047#
"AV 6, RFV 6, E" and Also for "Hycocon ETZ" (manufactured up

"Multiblock T-RTL" (manufactured up to 2015) to 2015 inclusive).
0.65 (100) 1187057#
"A, RF" (DN 10 - DN 15, manufactured since 2015)
0.95 (100) 1187059#
"A" (manufactured since 2013) and "RF"

1.00 - 1.10 (100) 1187049#
"A" (DN 10 - DN 15) and "RF" # These valve inserts are suitable for all valve
0.95 (100) 1187069# sizes of the thermostatic valves "A, AV 9, AQ,
AV 6, ADV 9, ADV 6, CV 9, E, EQ, AF, RF,
RFV 9, RFQ and RFV 6".
"A" (DN 20 - DN 32) and "AZ"
1.10 (100) 1187060#
"AF"
0.32 (100) 1187352# Distinctive features of the valves:
Gland nut
Protection
Series (since end of
cap
1993)
A black unplated brass
ADV 6 grey-green grey-green

(3 frontal lugs)
AF red red
AQ/ EQ/ RFQ light grey
AV 9/ CV 9/ E white
(3 frontal lugs)
AZ H orange
AZ V green
RF blue unplated brass
RFV 9 light green

(3 frontal lugs)
for thermostatic valves "AQ, RFQ, EQ",

fittings "Multiblock TQ, TQ-RTL",
and "Unibox TQ, Q plus"
"QA" (25) 1187065#
Replacement filter mesh for valve insert "QA"
Set = 10 remplacement filter meshes 1187090*
1.108 *New in catalogue 2017 to be discontinued 2017

1
1.p Valve inserts
the radiator Valve inserts for valves with connection thread M 30 x 1.5
kv
Packing
unit
P-dev.
"ADV 6" The double function of the "ADV 6" and

"ADV 9" inserts provokes an automatic
0.65 (100) 1186001# closing of the valve to 5 % of the nominal
flow (frost protection) should the
Presetting as "AV 6" and "AV 9".
"ADV 9"
0.67 (100) 1186002#
"PTB" and "Cocon 2TZ"
kvs = 0.45 P1 (100) 1186052#

kvs = 1.0 P2 (100) 1186053#
kvs = 1.8 P3 (100) 1186054
with stainless steel seat
(especially for steam installations) (100) 1186200#
Valve insert for three-way conversion valve For three-way conversion valve
item no. 1180584/85/86/87.
with presetting (100) 1187056
"Combi LR" with cap (100) 1187071
Special valve insert for reversed supply and return pipe

for thermostatic valves "A, AV 9, AV 6, ADV 6, ADV 9,
CV 9, E, AF, RF, RFV 9, RFV 6"
without presetting
0.45 (100) 1187070#
"Unibox E T"
"AV6U" 0.52 (100) 1187077 "Unibox E plus"
"Unibox E BV"
"Unibox T"
"Unibox TQ"
Gland nut for all valves (exept for "AV 9, AV 6, CV 9, E, RFV 9, RFV 6, Suitable for M 30 x 1.5 and M 30 x 1.0.
ADV 9, ADV 6, AQ, RFQ, EQ, A (manufactured since 2013), RF
(manufactured since 2014) GH and GD")
Wrench size 14 mm (10) 1017501

Set = 5 pieces

1.p Valve inserts
Valve inserts for valves with connection thread M 30 x 1.0
the radiator (for valves manufactured up to 1998)
kv
Packing
unit
P-dev.

for valves "AV 6, ADV 6, RFV 6, E", insert.
V6 fittings "Multiblock T/TU/TFU/T-RTL" The presetting key fits only in one position.
123
(manufactured up to 2015) and valve inserts GH
1 2
3
6
4
SW 13
5

Valve inserts for valves with connection thread M 30 x 1.0 Also suitable for Ista radiator valves.
(for valves manufactured up to 1998) Illustration of distinctive features: page 1.144.
"AZ" + These valve inserts are suitable for all valve

bodies with connection thread M 30 x 1.0 of
1.10 (100) 1017060+ all sizes of the valves "A, AV 6, ADV 6, AZ, E,
RF and RFV 6".
"A, E and RF"
0.95 (50) 1017069+
"AV 6 and RFV 6"
0.65 (25) 1017057+
0.32 (10) 1017351
1.110 2017
1
the radiator 1.q Return temperature limiters
Page

Content
Return temperature limiter valves for thermostat "Uni RTLH" 1.112
Valve inserts 1.112
Extension 1.112
Gland nut 1.112
Return temperature limiter sets 1.113
2017 1.111
Return temperature limiter valves for thermostat "Uni RTLH"
Thermostat "Uni RTLH"
the radiator Thermostat "Uni RTL"
kv
Packing
unit
P-dev.
Return temperature limiter valves for thermostat "Uni RTLH" Application:

connection thread M 30 x 1.5 Central heating systems with closed
brass, nickel plated circuits, for operation with non-aggressive,
harmless fluids (e.g. water or suitable water
Reversed angle pattern valve for the return pipe and glycol mixtures according to VDI 2035/
NORM 5195).
Combined radiator/surface heating.
0.30 (25) 1024363
0.30 (25) 1024364 Max. operating pressure ps: 10 bar (PN 10)
Valve insert with double disc prevents

Straight pattern valve for the return pipe inadvertent overheating, with frost protection.
0.30 (25) 1024463 sleeves page 1.143.
0.30 (25) 1024464
Thermostat "Uni RTLH" With '0' setting,

connection thread M 30 x 1.5 may be limited or locked.
Temperature range:
white (25) 1027165 10 C40 C factory setting (return
chrome plated (25) 1027172 temperature), may be increased to 50 C by
cancelling the limitation (40 C).
anthracite (10) 1149068 With '0' setting,

may be limited or locked.
Temperature range:
10 C - 70 C
The thermostats "Uni RTLH" may also be used
in combination with the pressure independent
control valves "Cocon QTZ" (with distance
piece 114909.) for the limitation of the return
temperature in one pipe risers.
Thermostat "Uni RTL" With '0' setting,

RTL valves with connection thread
white (25) 1027100 M 30 x 1.0 are no longer produced.
Valve inserts
for return flow valves (100) 1026981 Valve insert with double disc.
connection thread M 30 x 1.5 Prevents inadvertent overheating,
with frost protection.
Extension
L = 20 mm
for RTLH valves (10) 1022699 For "Unibox RTL", "Unibox vario", "Unibox TQ"
Gland nut
for all RTLH valves
Set = 5 pieces (10) 1026986
1.112 2017
1
the radiator Return temperature limiter sets
kv
P-dev.
Return temperature limiter sets Packed as a set.

Valve and thermostat RTLH.
Reversed angle connection Temperature range:
consisting of: 10 C40 C factory setting (return
temperature), may be increased to 50 C by
Reversed angle pattern valve for the return pipe and cancelling the limitation (40 C).
thermostat Uni RTLH
DN 15 0.30 1028364
Straight pattern connection For further information see

consisting of: "Technical information":
Straight pattern valve for the return pipe and

thermostat Uni RTLH
DN 15 0.30 1028464
2017 1.113
1
the radiator 1.r Manual radiator valves
Page

Content
Manual radiator valves "HRV" 1.116
Manual radiator valves "HR" 1.116
2017 1.115
Manual radiator valves "HRV"
the radiator Manual radiator valves "HR"
Packing
unit
Manual radiator valves "HRV" Application:

presetting by using the stem Central heating and cooling systems with
manual head white closed circuits, for operation with non-
Angle pattern valve suitable water and glycol mixtures according
to VDI 2035/NORM 5195).
DN 10 3.20 (25) 1191503
DN 15 3.20 (25) 1191504 Max. operating pressure ps: 10 bar (PN 10)
DN 20 3.20 (25) 1191506 Operating temperature ts: 2 C up to 120 C
Steam 0.5 bar, 110 C.
reduced dimensions, as thermostatic valves RF Lenghts according to DIN EN 215.

The protection cap (as delivered) protects the
DN 10 3.20 (25) 1194503 handwheel against damages.
DN 15 3.20 (25) 1194504 The manual radiator valve is suitable for
DN 20 3.20 (25) 1194506 subsequent conversion to thermostatic
operation by replacing the manual head.
The valves are suitable for installation with
DN 10 1.70 (25) 1191603 copper pipes.
DN 15 1.70 (25) 1191604
DN 20 2.30 (25) 1191606 Compression fittings page 1.140, compression
fittings for valves with reduced dimensions
page 3.45, reinforcing sleeves page 1.143.
reduced dimensions, as thermostatic valves "RF"
DN 10 1.70 (25) 1194603 Valves with reduced dimensions are not

DN 15 1.70 (25) 1194604 suitable in combination with the female
DN 20 2.30 (25) 1194606 threaded compression fittings "Cofit S".
Manual radiator valves "HR" No subsequent conversion to thermostatic

white handwheel operation.
Angle pattern valve Lengths according to DIN 3842.

Protection cap (as delivered) protects the
DN 10 1.45 (25) 1190503 handhweel against damages.
DN 15 1.45 (25) 1190504
DN 20 1.45 (25) 1190506 For further information see
DN 10 1.20 (25) 1190603

DN 15 1.20 (25) 1190604
DN 20 1.20 (25) 1190606
DN 15 1.20 1190654
Manual heads Pages 1.18, 2.77

1
the radiator 1.s "Q-Tech" Fittings for automatic hydronic balancing
Page

Content
"Multiflex FQ" Fittings for G female thread 1.118
"Multiflex FQ" Fittings for G male thread 1.118
2017 1.117
"Multiflex FQ" Fittings for G female thread
the radiator "Multiflex FQ" Fittings for G male thread
Packing
unit
"Multiflex FQ" Fittings for G female thread Fitting with "Q-Tech" and isolating facility for
brass connection fitting with "Q-Tech" for radiators with integrated distributor.
automatic hydronic balancing,
soft sealing, flat sealing, nickel plated, Application:
for radiators with integrated distributor G female thread Central heating and cooling systems with
Straight pattern aggressive, harmless fluids (e.g. water or
G male x G male (5) 1015873* to VDI 2035/NORM 5195).
The volume flow for the radiator determined in

the heat demand calculation can be set directly
Angle pattern at the fitting. The volume flow is automatically
Left hand side connection limited to the set value (automatic hydronic
balancing).
G male x G male (5) 1015874* Even if differential pressure variations occur in
the heating system, the flow rate is constantly
maintained within the necessary proportional
band.
Angle pattern
Right hand side connection Setting is carried out by using the
presetting key supplied with the
G male x G male (5) 1015875* fittings.
Isolation is carried out with the help
of an Allen key.
"Multiflex FQ" Fittings for G male thread The nipples supplied with the fittings are
brass connection fitting with "Q-Tech" for self sealing.
automatic hydronic balancing,
soft sealing, flat sealing, nickel plated, The fittings are not suitable for steam
for radiators with integrated distributor G male thread installations.
For further information see chapter "Fittings for

Straight pattern
radiators with integrated distributor": page
G c/nut x G M (5) 1015803* 1.120
An existing angle pattern fitting for left hand

side connection can be converted to a
"Multiflex FQ" fitting for right hand side
connection by swapping the valve insert and
Angle pattern the isolating insert and vice versa.
G c/nut x G M (5) 1015804* stainless steel and plastic pipes as well as the
page 1.140.
Angle pattern
Right hand side connection Alternatively, the compression fittings of other
G c/nut x G M (5) 1015805*
connection to G male thread according
used.
left right

1
the radiator 1.t Fittings for radiators with integrated distributor
Page

Content
"Multiflex F" Fittings for G female thread 1.120
"Multiflex F" Fittings for G male thread 1.121
"Multiflex V" Fittings for G female thread 1.122
"Multiflex V" Fittings for G male thread 1.123
Radiator connection 1.124
Inversion fittings 1.124
Plastic rosette cover, white 1.125
2017 1.119
1 control / Hydronic balancing at 1.t Fittings for radiators with integrated distributor
the radiator "Multiflex F" Fittings for G female thread
Packing
unit
"Multiflex F" Fittings for G female thread The connection to the radiator is self
brass connection fittings, soft sealing, flat sealing, nickel plated, sealing. (Self sealing nipples are supplied
for radiators with integrated distributor G female thread with each fitting.)
Combinations Application:
distance between pipe centres 50 mm Central heating and cooling systems with
ZB isolating fitting for two pipe systems aggressive, harmless fluids (e.g. water or
G male x G male (10) 1015883# to VDI 2035/NORM 5195).
ZB angle pattern isolating fitting for two pipe systems
The counterpart (thread of the distributor) of
G male x G male (10) 1015884# the self sealing nipple has to be equipped with
a bevel (without burrs) in order not to damage
Design cover for the ring gasket. Soft seal between connection
ZB isolating and angle pattern isolating fittings, fitting and nipple. The connection fittings for
item no. 1015813/14/83/84, white G female thread are suitable for radiators
with integrated distributor of the following
(5) 1015896 manufacturers:
Agis, Alarko, Arbonia, Baykan, Bemm, Biasi,
ZB isolating fitting for two pipe systems, pivoting Borer, Bremo, Caradon-Stelrad, Celikpan,
Concept, Csknz, DEF, Delta, Demrad,
G male x G male (10) 1015781 DiaNorm, Dia-therm, Dunaferr, DURA, Ferroli,
HM-Galant, Henrad, Hoval, Hudevad, IMAS,
Itemar, Jugoterm, Korado, Manaut, Quinn,
Purmo, Radson, Runtal, Schfer, Starpan,
ZBU preset isolating fitting for two pipe systems Stelrad, Superia, TermoTeknik, Thor,
for filling and draining US-Steel, Vasco, VEHA, Zehnder, Zenith.
(Subject to change without notice).
G male x G male (10) 1015993 The ZB fittings (two pipe block) are used for
radiators with integrated distributor for two
ZBU angle pattern preset isolating fitting for two pipe systems pipe systems.
for filling and draining
# Isolation with limit stop
G male x G male (10) 1015994
The ZBU fittings (two pipe block, convertible)
can be used for two pipe systems (as
CEW preset isolating fitting for one pipe systems
supplied) or for one pipe systems. If used in
one pipe systems, the bypass stem has to be
G male x G male (10) 1015933 adjusted according to the enclosed installation
instructions.
CEW angle pattern preset isolating fitting for one pipe systems The CEW fittings can be used for one pipe
for filling and draining operation (like ZBU fittings but preset to one
pipe operation with a radiator share of 35 %) or
G male x G male (10) 1015934 for two pipe operation.
Single fittings The Oventrop compression fittings are to be

Isolating fitting Combi 3 used, page 1.142.
G male x Rp female (25) 1016175 Alternatively, the compression fittings of other

G male x G male (25) 1016177 manufacturers which are suitable for the
Angle pattern isolating fitting Combi 3
used.
G male x Rp female (25) 1016575
G male x G male (25) 1016577 "Combi 3" for presetting, isolating, filling and
draining.
Service tool item no. 1090551, page 1.121.
Fittings with Rp female thread are not

suitable for compression fittings (only for
threaded pipes).
1.120 2017
1
the radiator "Multiflex F" Fittings for G male thread
Packing
unit
"Multiflex F" Fittings for G male thread The connection fitting to the radiator is soft
brass connection fittings, soft sealing, flat sealing, sealing.
nickel plated, for radiators with integrated distritubor G male
thread Application:
according to DIN EN 16313 (cone "Euro") Central heating and cooling systems with
Combinations aggressive, harmless fluids (e.g. water or
distance between pipe centres 50 mm suitable water and glycol mixtures according
to VDI 2035/NORM 5195).
ZB isolating fitting for two pipe systems Max. operating pressure ps: 10 bar (PN 10)
G collar nut x G male (10) 1015813# (for short periods up to 130 C)
The connection fittings for G male thread are

suitable for radiators with integrated distributor
ZB angle pattern isolating fitting for two pipe systems of the following manufacturers:
Baufa, Brtje, Brugman, Buderus, De Longhi,
G collar nut x G male (10) 1015814#
Kermi, Radel, Ribe, Vogel + Noot.
Design cover for
ZB isolating and angle pattern isolating fittings, The ZB fittings (two pipe block) are used for
item no. 1015813/14/83/84, white radiators with integrated distributor for two
pipe systems.
(5) 1015896
# Isolation with limit stop
ZB isolating fitting for two pipe systems, pivoting
The ZBU fittings (two pipe block, convertible)
G collar nut x G male (10) 1015711 can be used for two pipe systems (as
supplied) or for one pipe systems.
ZBU preset isolating fitting for two pipe systems If used in one pipe systems, the bypass stem
for filling and draining has to be adjusted according to the enclosed
installation instructions.
G collar nut x G male (10) 1015943
The Oventrop compression fittings are to be
used, page 1.142.
ZBU angle pattern preset isolating fitting for two pipe systems
Single fittings used.
Isolating fitting Combi 3
The presetting of the fittings is carried out with
G collar nut x Rp female (25) 1016166
the help of a 4 mm Allen key.
"Combi 3" for presetting, isolating, filling and
Angle pattern isolating fitting Combi 3 draining.
G collar nut x Rp female (25) 1016567 Fittings with Rp female thread are not
G collar nut x G male (25) 1016569 suitable for compression fittings (only for
threaded pipes).

Service tool 1090551
2017 1.121
1 control / Hydronic balancing at 1.t Fittings for radiators with integrated distributor
the radiator "Multiflex V" Fittings for G female thread
Packing
unit
"Multiflex V" Fittings for G female thread The connection fitting to the radiator is self
brass connection fittings, metal to metal tapered sealing, sealing. (Self sealing nipples are supplied
nickel plated, for radiators with integrated distributor with each fitting.)
G female thread
Application:
Combinations Central heating and cooling systems with
distance between pipe centres 50 mm closed circuits, for operation with non-
ZB preset isolating fitting for two pipe systems suitable water and glycol mixtures according
for filling and draining to VDI 2035/NORM 5195).
G male x G male (10) 1016291 Operating temperature ts: 2 C up to 120 C
ZB angle pattern preset isolating fitting for two pipe systems The counterpart (thread of the distributor) of
for filling and draining the self sealing nipple has to be equipped with
a bevel (without burrs) in order not to damage
G male x G male (10) 1016292 the ring gasket. The connection fittings for
G female thread are suitable for radiators
CE preset isolating fitting for one pipe systems with integrated distributor of the following
for filling and draining manufacturers:
Agis, Alarko, Arbonia, Baykan, Bemm, Biasi,
G male x G male (10) 1016391 Borer, Bremo, Caradon-Stelrad, Celikpan,
Concept, Csknz, DEF, Delta, Demrad,
DiaNorm, Dia-therm, Dunaferr, DURA, Ferroli,
CE angle pattern preset isolating fitting for one pipe systems
HM-Galant, Henrad, Hoval, Hudevad, IMAS,
Itemar, Jugoterm, Korado, Manaut, Quinn,
G male x G male (10) 1016392 Purmo, Radson, Runtal, Schfer, Starpan,
Stelrad, Superia, TermoTeknik, Thor, US-Steel,
Vasco, VEHA, Zehnder, Zenith.
The ZB fittings (two pipe block) are used for

radiators with integrated distributor for two
pipe systems.
The CE fittings (Combi one pipe) with barrier
preventing heat back-flow are used for
radiators with two pipe distributors in one pipe
systems. Tolerance adjustment of the radiator
connection with the help of the patented body
connection sealed with double O-ring. Preset
radiator flow share: 35 % (factory setting)


1
the radiator "Multiflex V" Fittings for G male thread
Packing
unit
"Multiflex V" Fittings for G male thread The connection fitting to the radiator has a
brass connection fittings, metal to metal tapered sealing, metal to metal seal.
nickel plated, for radiators with integrated distributor
G male thread according to DIN EN 16313 (cone "Euro") Application:
Combinations closed circuits, for operation with non-
distance between pipe centres 50 mm aggressive, harmless fluids (e.g. water or
ZB preset isolating fitting for two pipe systems to VDI 2035/NORM 5195).
for filling and draining Max. operating pressure ps: 10 bar (PN 10)
G collar nut x G male (10) 1016241 (for short periods up to 130 C)
The connection fittings for G male thread are

ZB angle pattern preset isolating fitting for two pipe systems suitable for radiators with integrated distributor
for filling and draining of the following manufacturers:
Baufa, Brtje, Brugman, Buderus, De Longhi,
G collar nut x G male (10) 1016242 Kermi, Radel, Ribe, Vogel + Noot.
CE preset isolating fitting for one pipe systems The ZB fittings (two pipe block) are used for
for filling and draining radiators with integrated distributor for two
pipe systems.
The CE fittings (Combi one pipe) with barrier
CE angle pattern preset isolating fitting for one pipe systems preventing heat back-flow are used for
for filling and draining radiators with two pipe distributors in one pipe
systems. Tolerance adjustment of the radiator
G collar nut x G male (10) 1016342 connection with the help of the patented body
connection sealed with double O-ring. Preset
radiator flow share: 35 % (factory setting)
Single fitting Fittings with Rp female thread are not

suitable for compression fittings (only for
Fitting threaded pipes).
G collar nut x Rp female (25) 1016304 "Technical information":

Radiator connection
the radiator Inversion fittings
Packing
unit
Radiator connection The radiator connection module "Multimodul"

allows the installation and operation of the
"Multimodul" Radiator connection heating system without radiators during the
construction period. The module is suitable for
1015651 one and two pipe heating systems and has
isolating, draining, filling and presetting
facilities.
The module is supplied with a wall installation
box with white cover (RAL 9010), connecting
pipes, compression fittings and a protection
Inversion fittings cover made of Styrofoam.
brass, nickel plated,
for reversed supply and return pipe, for two pipe heating systems,
for radiators with integrated distributor
with isolating facility

distance between pipe centres 50 mm
G male x G male (10) 1016363
angle pattern, with isolating facility

G male x G male (10) 1016463


upper distance between pipe centres 50 mm
lower distance between pipe centres 40 mm
angle pattern, with isolating facility

Bridging fitting For bridging-over the supply and the return

distance between pipe centres 50 mm pipe in case of subsequent installation of
radiators.
G male thread (10) 1016452
1.124 2017
1.t Fittings for radiators with integrated distributor 1
Connection fittings
the radiator Plastic rosette cover, white
Packing
unit
Connection fittings For "Multiflex V" fittings.

brass Effective length: 15.5 mm
Insert as set = 2 pieces For "Multiflex F", "Multiblock T/TU/TFU/TQ/

T-RTL/TQ-RTL" and "Cocon QTZ" DN 15.
for cone according (50) 1661100
to DIN EN 16313 (cone "Euro")
Distance piece, nickel plated Compression fittings, 2-fold, page 1.142.
Set = 2 pieces (100) 1681650 G male thread side with tapered sealing,
G female x G male according to DIN EN 16313 (cone "Euro").
Nipple, unplated
one port self sealing
Set = 10 pieces
G male x G male (10) 1028252 For "Multiflex F", "Multiblock T/TU/TFU/TQ/

T-RTL/TQ-RTL".
Port G flat sealing.
G male x G male (10) 1028253 For "Multiflex V", port G with tapered sealing
Nipple, nickel plated Port G with tapered sealing

G male x G male (10) 1028161 Port G self sealing.
Double nipple, brass, nickel plated Port G with tapered sealing according to
DIN EN 16313 (cone "Euro").
G male x G male (10) 1028263
Plastic rosette cover, white For "Bypass-Combi" distributors, valves with

flat, distance between pipe centres 50 mm insertion tube, two pipe connection pieces
from page 1.86, "Multiblock T/TU/TFU/TQ"
Distance between pipe centres 50 mm from page 1.78 and "Multiflex" fittings from
Perforation page 1.120.
12 mm (25) 1016671
14 mm (25) 1016672
15 mm (25) 1016673
16 mm (25) 1016674
18 mm (25) 1016675
for pipe diameters 10, 12, 15, 16, (25) 1016662

18, 20 mm, distance between
pipe centres 50 mm
2017 1.125
1
the radiator 1.u Lockshield valves for conventional radiators
Page

Content
"Combi 4" 1.128
"Combi C" 1.128
"Combi 3" 1.129
"Combi 2" 1.130
"Combi LR" 1.130
2017 1.127
"Combi 4"
the radiator "Combi C"
Packing
unit
"Combi 4" Application:

presetting with memory lock, Central heating and cooling systems with
isolating, filling and draining closed circuits, for operation with non-
Bronze/brass model, female thread according to EN 10226-1 suitable water and glycol mixtures according
Angle pattern to VDI 2035/NORM 5195).
nickel plated Max. operating pressure ps: 10 bar (PN 10)
DN 10 1.70 (25) 1090661 (for short periods up to 130 C)
DN 15 1.70 (25) 1090662
DN 20 1.70 (10) 1090663 Lengths according to DIN 3842
(except for item no. 1090672 und 1090772).
All lockshield valves are also suitable for the
DN 15 1.70 (25) 1090672 The lockshield valves DN 15 may be connected

G male thread x R male thread to the Oventrop composition pipe "Copipe".
Compression fittings page 1.140,

reinforcing sleeves page 1.143.
Straight pattern
nickel plated The lockshield valves item no. 1090662 and
1090762 are self sealing.
DN 10 1.70 (25) 1090761
DN 15 1.70 (25) 1090762
DN 20 1.70 (10) 1090763

G male thread x R male thread "Technical information":
"Combi C" Application:

presetting with memory lock, Central heating and cooling systems with
isolating, filling and draining closed circuits, for operation with non-
Angle pattern suitable water and glycol mixtures according
chrome plated to VDI 2035/NORM 5195).
Straight pattern
chrome plated Technical data as "Combi 4".
DN 15 1.70 (25) 1165554 Lengths according to DIN 3842.
Service tool 1090551 All lockshield valves are suitable for the

1.128 2017
1
the radiator "Combi 3"
Packing
unit

presetting, isolating, filling and draining Central heating and cooling systems with
bronze/brass model, female thread according to EN 10226-1 closed circuits, for operation with non-
with female threaded pipe connection aggressive, harmless fluids (e.g. water or
Angle pattern to VDI 2035/NORM 5195).
nickel plated Max. operating pressure ps: 10 bar (PN 10)
DN 15 1.70 (25) 1090362 Lengths according to DIN 3842.
DN 20 1.70 (10) 1090363
All lockshield valves are also suitable for the
Straight pattern
nickel plated The lockshield valves DN 15 may be connected
DN 10 1.70 (25) 1090461
DN 15 1.70 (25) 1090462 Compression fittings page 1.140,
DN 20 1.70 (10) 1090463 reinforcing sleeves page 1.143.
with press connection for copper, stainless steel Press connection:

and C-steel pipe 15 mm For the direct connection of copper pipes
Angle pattern according to DIN EN 1057/DVGW GW 392,
nickel plated stainless steel pipes according to DIN EN
10088/DVGW GW 541 and thin-walled C-steel
DN 15 1.70 (25) 1090374 pipe (material no. E 195/1.0034) according to
Straight pattern with the original contours SANHA (SA),
nickel plated Geberit- Mapress (MM) or Viega (Profipress) in
DN 15 1.70 (25) 1090474 carried out according to the installation
instructions.
2017 1.129
"Combi 2"
the radiator "Combi LR"
Packing
unit

presetting, isolating Central heating and cooling systems with
brass model, female thread according to EN 10226-1 closed circuits, for operation with non-
nickel plated to VDI 2035/NORM 5195).
DN 20 1.70 (10) 1091063
Lengths according to DIN 3842
(except for item no. 1091072 and 1091172) .
DN 15 1.70 (25) 1091072
G male thread x G male thread All lockshield valves are also suitable for the
The lockshield valves DN 15 may be connected

Straight pattern to the Oventrop composition pipe "Copipe".
nickel plated
DN 10 1.70 (25) 1091161 sleeves page 1.143.
DN 15 1.70 (25) 1091162
DN 20 1.70 (10) 1091163 The lockshield valves item no. 1091072 and
1091172 are self sealing.
DN 15 1.70 (25) 1091172
G male thread x G male thread
Bronze/brass model, solder type The insert has to be unscrewed for soldering
Angle pattern operation.
unplated
R x 12 mm 1.70 (25) 1091251

R x 12 mm 1.70 (25) 1091252
R x 15 mm 1.70 (25) 1091253
Straight pattern For further information see

unplated "Technical information":
R x 12 mm 1.70 (25) 1091351

R x 12 mm 1.70 (25) 1091352
R x 15 mm 1.70 (25) 1091353
"Combi LR" Application:

presetting, isolating Central heating and cooling systems with
brass model, female thread according to EN 10226-1 closed circuits, for operation with non-
nickel plated to VDI 2035/NORM 5195).
DN 20 4.50 (10) 1027566 Lengths according to EN 215.
DN 25 4.50 (10) 1027568
With higher kvs value, for instance for one pipe
Straight pattern heating systems and cooling systems.
DN 10 1.80 (25) 1027662 All lockshield valves from DN 10 up to DN 20

DN 15 1.80 (25) 1027664 are suitable for the installation with copper
DN 20 2.40 (10) 1027666 pipes.
DN 25 3.20 (10) 1027668
The lockshield valves DN 15 may be connected


1
the radiator 1.v Distributors/collectors
Page
Content
"Multidis SH" Stainless steel distributor/collector 1.132
Ball valves 1.132
Ring spanner 1.133
Floor distributor/collector 1.133
2017 1.131
"Multidis SH" Stainless steel distributor/collector
the radiator Ball valves
Packing
unit
"Multidis SH" Stainless steel distributor/collector Application:

for radiator connection Central heating and cooling systems with
flat sealing closed circuits, for operation with non-
for 2 circuits 1407152 suitable water and glycol mixtures according
for 3 circuits 1407153 to VDI 2035/NORM 5195).
for 4 circuits 1407154 Max. operating pressure ps: 10 bar (PN 10)
for 5 circuits 1407155 Max. operating temperature ts: 100 C
for 6 circuits 1407156
for 7 circuits 1407157 Description:
for 8 circuits 1407158 Pre-assembled distributor/collector.
for 9 circuits 1407159 Flow distributor and supply collector with vent
for 10 circuits 1407160 plugs and terminal caps.
for 11 circuits 1407161 Heating circuit connections G male thread
for 12 circuits 1407162 according to DIN EN 16313 (cone "Euro") for
Oventrop compression fittings.
Brackets (loosely added) sound-absorbing as
per DIN 4109 standard.
Ball valves
flat sealing
GFxG1M (10) 1406383

G1FxG1M (10) 1406384
flat sealing, with thermometer (080C)

with red T-handle
GFxG1M 1406483
G1FxG1M 1406484
valves 1406384

with blue T-handle

GFxG1M 1406583
G1FxG1M 1406584

flat sealing,

with sensor connection M 10 x 1.0

G1FxG1M (10) 1406708

with cone "Euro" Ball valve for the isolation of the heating
circuits at the distributor/collector. Heating
G male x G collar nut (50) 1406504 circuit connection G male thread according
to DIN EN 16313 (cone "Euro") for Oventrop
compression fittings. Distributor/collector
connection with collar nut G and O-ring seal.
1.132 2017
Flush-mounted cabinets 1
Ring spanner
the radiator Floor distributor/collector
Flush-mounted cabinets Depth: 115 - 180 mm

steel, galvanised, frame and doors white lacquered Height: 760 - 885 mm
removable screen To be used for the following distributors/
collectors:
No. 1: inner width: 560 mm 1401151 S No. S+B No.
No. 2: inner width: 700 mm 1401152 8 circuits 1 7 circuits 1
No. 3: inner width: 900 mm 1401153
11 circuits 2 10 circuits 2
12 circuits 3 12 circuits 3
No. of the cabinets
Distributor/collector for radiator connection:

S = stainless steel distributor/collector without
ball valves
S + B = stainless steel distributor/collector with
ball valves
Ring spanner
Spanner size 30/32 1401091 For the installation of the compression fittings.
Floor distributor/collector Application:

with heat meter connections The floor distributor/collector with heat meter
connections is used for the distribution and
for 2 dwelling units 1408652* isolation of the volume flows on each floor to
for 3 dwelling units 1408653* the individual dwelling units.
for 4 dwelling units 1408654*
for 5 dwelling units 1408655* The heat meter connection sets allow for the
installation of heat meters for the registration of
the heat consumption of the individual
dwellings.
consisting of:
Dimensions/connection sizes:
Flow distributor and return collector with G 1 and G connections
L 40
108
(flat sealing with collar nuts)

G1
Airvent, fill and drain valves, ring gaskets

Heat meter connection sets G3/4 100
300
Double bracket
730
The components have to be assembled on site.

110 x G 3/4
350
130 x G 1
G3/4 100
Lengths of the floor distributors/collectors:
Item no. No. of Length (L)

dwelling units
1408652 2 325 mm
1408653 3 425 mm
1408654 4 525 mm
1408655 5 625 mm

1
the radiator 1.w Conversion fittings/Accessories for radiators
Page

Content
Conversion fittings 1.136
Strainer inserts 1.137
Accessories for radiators 1.138
2017 1.135
1 control / Hydronic balancing at 1.w Conversion fittings/Accessories for radiators
the radiator Conversion fittings
Packing
unit
Conversion fittings
brass, nickel plated, with tapered sealing
for thermostatic and manual valves
S-connection fitting
(G male thread x G collar (10) 1019204

The S-connection fittings (protection of
nut)
registered design) are suitable for the
replacement of radiators using existing
pipework. The max. distance between pipe
centres is 2 x 32 mm = 64 mm (no sealing
Length compensating tail (short) required).
In combination with double angle pattern
DN 10 G male thread (25) 1019003 valves, the coupling item no. 1019304 has to
DN 15 G male thread (25) 1019004 be used in addition.
DN 20 G male thread (25) 1019006
D
D
Length compensating tail (medium)
L
L
DN 15 R male thread (25) 1019052

L1
L1
D L L1 D L L1
Length compensating tail (long) G 3/8 9 21 R 1/2
G 1/2 10 23 DIN EN 13.2 43
G 3/4 11 25 10 226-1
D
L
Reducer L1
D L L1
G1FxGM (10) 1019251
G 3/8 55 75
G1FxGM (10) 1019252 G 1/2 55 75
G 1 F x G M (10) 1019253 G 3/4 50 70
G 1 F x G M (10) 1019254 D
Reducing coupling
t1
L
DN 10 (G c/nut x R M) (25) 1019351 t
SW
D1
Reducing tail
Dim . D D1 L t t1 SW *
DN 20 (G male thread) (25) 1019352 1" x 1
/2" G 1 G 1
/2 26 9 11 38
1" x /"
3 4
G 1 G /
3 4
27 10 11 38
DN 25 (G male thread) (25) 1019353 1 1/4" x 1
/2" G 1 1/4 G 1
/2 28 9 13 46
1 1/4" x 3
/4" G 1 1/4 G 3
/4 29 10 13 46
Coupling * SW = spanner size
DN 10 (G c/nut x R M) (50) 1019303

DN 15 (G c/nut x R M) (50) 1019304
DN 20 (G 1 c/nut x R M) (50) 1019306
DN 25 (G 1 c/nut x R 1 M) (50) 1019308
self sealing, with threaded ring gasket
DN 15 (G c/nut x G M) (50) 1019362
self sealing with O-ring
DN 15 (G c/nut x G M) (25) 1019372
Elbow Especially suitable for "Bypass-Combi" (pages

1.86 and 1.87) if a straight pattern valve shall
DN 15 (G M x G c/nut) (25) 1019365 be used instead of an angle pattern valve.
Compensation fitting for lower connection Axle distance 11.5 mm, H = 43 mm,
both ports with tapered sealing.
G c/nut x G M (10) 1019451
1.136 2017
1
the radiator Strainer inserts
Packing
unit
Strainer inserts
plastic For the conversion of old installations in order

to avoid a malfunction due to coarse impurity
DN 10 () (50) 1019903 (deposits).
DN 15 () (50) 1019904
DN 20 () (25) 1019906
DN 25 (1) (25) 1019908
Cap Female thread of the cap

with washer and fixing loop
DN 10 (10) 1010999 G , without fixing chain

DN 15 (50) 1034052 G , also for "Optiflex" DN 10
DN 20 (25) 1034053 G1
DN 25 (25) 1034008 G 1
2017 1.137
the radiator 1.w Conversion fittings/Accessories for radiators
Packing
unit
Accessories for radiators Application:

Central heating systems with closed
Vent plug circuits, for operation with non-aggressive,
brass, nickel plated harmless fluids (e.g. water or suitable water
and glycol mixtures according to VDI 2035/
for panel radiators NORM 5195).
with rotating water outlet Max. operating pressure ps: 10 bar (PN 10)
self sealing Operating temperature ts: 2 C up to 120 C

Blind plugs
brass

G male thread 1100103
brass, nickel plated Max. operating pressure ps: 10 bar (PN 10)
self sealing Operating temperature ts: 2 C up to 100 C

Keys
suitable for item no. 10376.. and 10380..
(6 mm square)
for all sizes (10) 1103051
suitable for item no. 1101603 and 1101604

(5 mm square)
for all sizes (10) 1103151
Venting screw
brass

Drain valve Max. operating pressure: ps: 10 bar (PN 10)

self sealing, with rotating outlet Max. operating temperature ts: 100 C
made of brass resistant to dezincification With nipple for hose. Seal made of EPDM.
Set = 10 pieces For filling and deaeration, for use at radiators.
Handwheel and outlet anthracite Also suitable for valves and components of
surface heating and potable water systems.
1.138 2017
1
the radiator 1.x Connection system
Page

Content
"Ofix" Compression fittings (2-fold) 1.142
Summary 1.144
Installation examples 1.145
"Ofix" for the connection of standard pipes to Oventrop valves and controls 1.146
2017 1.139
1 control / Hydronic balancing at 1.x Connection system
the radiator "Ofix" Compression fittings
Packing
unit
"Ofix" Compression fittings For the connection of Oventrop radiator fittings

brass (except for single fittings "Multiflex" with female
thread Rp ) to the pipework.
for female thread
"Ofix CEP" for copper pipes according to DIN EN 1057 Application:
compression nut nickel plated, metal to metal sealing Central heating and cooling systems with
G x 10 mm (10) 1027151 aggressive, harmless fluids (e.g. water or
G x 12 mm (10) 1027152 suitable water and glycol mixtures according
G x 18 mm (10) 1027157 to VDI 2035/NORM 5195).
G x 22 mm (10) 1027158
G x 10 mm (10) 1028152
G x 12 mm (10) 1028153 Compression fittings for female thread
G x 14 mm (10) 1028154 (item no. 1028152 up to 56) not suitable
G x 15 mm (10) 1028155 for thermostatic valves "RF/RFV 6/RFV 9/RFQ",
manual valves "HRV" with reduced
G x 16 mm (10) 1028156
dimensions and return temperature limiter
valves.
Compression fittings for above valves: page

3.45
Attention:
When installing copper pipes with a wall
thickness of 1 mm, it is necessary to use
thickness exceed 1 mm, please contact the
thickness = 1 mm: page 1.143.
Exception: Reinforcing sleeves are not required
for soft sealing compression fittings.
Note: The pipes are not held by the soft sealing
be observed.
1.140 2017
1
the radiator "Ofix" Compression fittings
Packing
unit
for G male thread according to DIN EN 16313 (cone "Euro") For the connection of radiator fittings with male
Ofix CEP for copper pipes according to DIN 1057 thread G according to DIN EN 16313 (cone
collar nut nickel plated, metal to metal sealing "Euro") to the pipework.
Application:
10 mm (10) 1027472 Central heating and cooling systems with
12 mm (10) 1027473 closed circuits, for operation with non-
14 mm (10) 1027474 aggressive, harmless fluids (e.g. water or
15 mm (10) 1027475 suitable water and glycol mixtures according
16 mm (10) 1027476 to VDI 2035/NORM 5195).
18 mm (10) 1027477 Max. operting pressure ps: 10 bar (PN 10)
"Ofix CEP" Snap & Seal for copper pipes according to Max. operating pressure ps: 10 bar (PN 10)
DIN EN 1057, precision steel pipes according to DIN EN Operating temperature ts: 2 C up to 95 C
10305-1/2 and stainless steel pipes, collar nut nickel plated,
with double compression ring function, one-piece pre-assembled, The "Ofix CEP" compression fittings - Snap &
soft sealing (no reinforcing sleeves required) Seal - can also be used with galvanised steel
pipes (DIN EN 10305-3):
10 mm (10) 1027440 Geberit, Mapress C-steel system pipe
12 mm (10) 1027441 (galvanised from outside)
14 mm (10) 1027442 Seppelfricke, XPress C-steel pipe
16 mm (10) 1027444 Simplex, VSH C-steel pipe
Viega, Prestabo steel pipe
(galvanised from outside)
Ofix K for plastic pipes according to DIN 4726, PE-X according to The permissible operating pressures and
DIN 16892/16893, PB according to DIN 16968, PP according to DIN operating temperatures depend on the
8078 A1, collar nut nickel plated, metal to metal sealing plus O-ring application classes of the respective standands
of the plastic pipework systems (e.g. PE-X, DIN
12 x 1.1 mm (10) 1027768 EN ISO 15875).
12 x 2 mm (10) 1027752
14 x 2 mm (10) 1027755
16 x 1.5 mm (10) 1027767
16 x 2 mm (10) 1027757
17 x 2 mm (10) 1027759
18 x 2 mm (10) 1027761
20 x 2 mm (10) 1027763
Ofix K for plastic pipes according to DIN 4726, PE-X according to

DIN 16892/16893, PB according to DIN 16968, PP according to DIN
8078 A1, collar nut unplated, metal to metal sealing plus O-ring
12 x 1.1 mm (10) 1027788

12 x 2 mm (10) 1027772
14 x 2 mm (10) 1027775
16 x 1.5 mm (10) 1027787
16 x 2 mm (10) 1027777
17 x 2 mm (10) 1027779
20 x 2 mm (10) 1027783
18 x 2 mm (10) 1027781
2017 1.141
the radiator "Ofix" Compression fittings (2-fold)
Packing
unit
"Ofix" Compression fittings (2-fold) Compression fittings for female thread:

brass For the connection of Oventrop radiator fittings
(except single fittings "Multiflex" with female
for female thread thread Rp ) to the pipework.
Compression fittings for G male thread:
For the connection of "Multiblock
"Ofix CEP" Compression fittings T/TU/TFU/TQ/T-RTL and TQ-RTL" and
2-fold, for connecting pipe, metal to metal sealing "Multiflex" fittings as well as radiator valves
with insertion tube to the pipework.
G x 15 mm (50) 1016853
Application:
for G male thread according to DIN EN 16313 (cone "Euro") closed circuits, for operation with non-
collar nut nickel plated aggressive, harmless fluids (e.g. water or
"Ofix CEP" Snap & Seal 2-fold for copper pipes to VDI 2035/NORM 5195).
according to DIN EN 1057, precision steel pipes
according to DIN EN 10305-1/2 and stainless steel Item no. 1016853 and 101686.:
pipes, with double compression ring function, Max. operating pressure ps: 10 bar (PN 10)
one-piece pre-assembled, soft sealing (no Operating temperature ts: 2 C up to 120 C
reinforcing sleeves required) Item no. 101684.:
10 mm (50) 1016840 Operating temperature ts: 2 C up to 95 C
12 mm (50) 1016841
14 mm (50) 1016842 The "Ofix CEP" compression fittings - Snap &
15 mm (50) 1016843 Seal - can also be used with galvanised steel
16 mm (50) 1016844 pipes (DIN EN 10305-3):
18 mm (50) 1016845 Geberit, Mapress C-steel system pipe
(galvanised from outside)
Ofix CEP 2-fold for copper pipes according to DIN EN 1057, Seppelfricke, XPress C-steel pipe
metal to metal sealing (galvanised from outside)
Simplex, VSH C-steel pipe
12 mm (50) 1016861 Viega, Prestabo steel pipe
15 mm (50) 1016863 Attention:
16 mm (50) 1016864 When installing copper pipes with a wall
18 mm (50) 1016865 thickness of 1 mm, it is necessary to use
thickness exceed 1 mm, please contact the
thickness = 1 mm: page 1.143.
Exception:
Reinforcing sleeves are not required for soft
sealing compression fittings.
Note:
The pipes are not held by the soft sealing
be observed.
Ofix K 2-fold for plastic pipes according to DIN 4726, PE-X The permissible operating pressures and
according to DIN 16892/16893, PB according to DIN 16968, PP operating temperatures depend on the
according to DIN 8078 A1, metal to metal sealing plus O-ring application classes of the respective standands
12 x 1.1 mm (10) 1016883 EN ISO 15875).
12 x 2 mm (10) 1016870
14 x 2 mm (10) 1016873
15 x 2.5 mm (10) 1016885
16 x 1.5 mm (10) 1016882
16 x 2 mm (10) 1016874
17 x 2 mm (10) 1016876
18 x 2 mm (10) 1016877
20 x 2 mm (10) 1016879
1.142 2017
1.x Connection system 1
"Cofit S" Compression fittings
the radiator Brass reinforcing sleeves
Packing
unit
"Cofit S" Compression fittings Application:

for G male thread according to DIN EN 16313 (cone "Euro") Central heating and cooling systems with
universal application for composition pipe and, closed circuits, for operation with non-
provided similar preparation is used, aggressive, harmless fluids (e.g. water or
for plastic pipe (PE-X-pipe) suitable water and glycol mixtures according
2-fold, metal to metal sealing plus O-ring, to VDI 2035/NORM 5195).
outlet made of bronze,
compression ring and collar nut made of brass, The permissible operating pressures and
collar nut nickel plated operating temperatures depend on the
application classes of the respective standands
14 x 2.0 mm x G collar nut (10) 1507934 of the plastic pipework systems (e.g. PE-X, DIN
16 x 2.0 mm x G collar nut (10) 1507935 EN ISO 15875).
17 x 2.0 mm x G collar nut (10) 1507937
18 x 2.0 mm x G collar nut (10) 1507938
20 x 2.0 mm x G collar nut (10) 1507939
20 x 2.5 mm x G collar nut (10) 1507940
Brass reinforcing sleeves
Is required for the installation of soft pipes with

6 mm (100) 2083951 a wall thickness of 1 mm.
8 mm (100) 2083952
10 mm (100) 1029651 Diameters are related to the outer diameter of
12 mm (100) 1029652 the pipe.
14 mm (100) 1029653
15 mm (50) 1029654
16 mm (50) 1029655
18 mm (50) 1029656
22 mm (50) 1029657
2017 1.143
the radiator Summary
Connection of pipes, valves, radiators, distributors etc. for heating, sanitary and air conditioning by use of compression fittings
Oventrop Plastic pipe Copper pipe Precision Stainless Brass

composition to DIN 4726, DIN EN 1057 steel pipe steel pipe reinforcing
pipe Copipe PE-X to DIN (DIN 1786) DIN EN 10305-1 sleeves
and composi- 16 892/16 893, (DIN 2391)
tion pipes of PB to DIN DIN EN 10305-2
other manu- 16 968, (DIN 2393)
facturers PP to DIN
14 20 80 78 A1
12 20 10 18 10 18 10 18
Cofit S
outlet brass
resistant to 14 20 14 20
de-zincification page 11.32 page 11.32
compression (only
ring brass PE-X pipe)
Compression fittings for male threaded connection
G 34 according to DIN EN 16313 (cone Euro)
Ofix K
outlet 12 20
and pages
compression 1.141
ring brass
Ofix CEP 10 18 10 18 10 18
soft seal page page page
Snap & Seal 1.141 1.141 1.141
Ofix CEP 10 18
compression page
ring brass 1.141
for wall
thickness
Compression fittings for female
Ofix CEP 10 16
= 1 mm
threaded connection Rp 12
compression page
page 1.143
ring brass 1.141
Cofit S
outlet brass
resistant to 14 + 16
de-zincification Page 11.32
compression
ring brass
1.144 2017
1
the radiator Installation examples
untightened untightened
separation point
tightened tightened
Ofix CEP compression fitting for copper pipe, Ofix CEP compression fitting Snap & Seal for
metal to metal sealing, male threaded connection copper, precision steel and stainless steel pipe,
soft sealing, male threaded connection
tightened tightened
Ofix K compression fitting for plastic pipe, Cofit S compression fitting, universal application for
male threaded connection Copipe composition pipe, and, in case of identical
processing, also for PE-X plastic pipe, male threaded
connection
tightened tightened
Ofix CEP compression fitting for copper pipe, Cofit S compression fitting for composition pipe,
metal to metal sealing, female threaded connection female threaded connection
2017 1.145
the radiator "Ofix" for the connection of standard pipes to Oventrop valves and controls
Pipes Connection Connection system Male threaded connection

method
Connection fitting Additional Oventrop valves
fitting (examples)
Copper pipe, Collar nut, compression ring and Radiator valves
ring gasket
stainless steel
pipe, Screwed

precision steel connection for G 34 M according to DIN EN 16313
(cone Euro), soft sealing
pipe Item no. 102744.
1) Page 1.141
Valves for hydronic balancing
Collar nut and compression ring
Connection piece
Screwed
connection for G 34 M according to DIN EN 16313
(cone Euro), metal to metal sealing Item no. 15030..
Item no. 102747. Page 11.32
Page 1.141
Copper pipe
1) Valves for hydronic balancing
Item no. 10610..
Page 3.45
Soldering
Valves for water distribution
connection

Item no. 42020..
OV ..
DN QC
Page 8.66
Stainless steel
Press Valves for hydronic balancing
pipe
connection Item no. 42015..
and valves for water distribution
1)
Page 8.69
Collar nut, compression ring

Radiator valves
and outlet
Connection piece
Screwed
PE pipe
connection Valves for hydronic balancing
for G 34 M according to
DIN EN 16313 (cone Euro)
and valves for water distribution
Item no. 10277.., Page 1.141 Item no. 15030..
Page 11.32
Item no. 1016304

Page 1.123
Item no. 10693..

Radiator valves
Page 1.89
only three-way
conversion valves
Item no. 10613..

Page 3.45
Screwed
connection
Item no. 10614..
Page 3.45
Steel pipe
Item no. 42013..
as well as Page 8.66
screwed fittings Valves for water distribution
Item no. 42014..
Page 8.66
Item no. 10193..

Page 1.93
only three-way
Radiator valves
conversion valves
Welding Item no. 10605..

Page 3.45
connection
Item no. 42005..

Page 8.66
Valves for water distribution
Other pipes
e. g. stainless steel All other pipes - with their special connection - may be connected with flat sealing tailpipes (with ring gaskets
pipe, thick walled and collar nuts) to Oventrop flat sealing and male threaded valves.
plastic pipe
1) Pipes with a wall thickness of 1 mm will need reinforcing sleeves, except when the soft sealing fitting 102744. is used! Page 1.141.
1.146 2017
1
the radiator 1.x Connection system
Pipes Connection Connection system Female threaded connection

method
fitting (examples)
Compression nut and

compression ring
Item no. 10281.. Radiator valves

for Rp 1/2 F
Page 1.140
Exception:
Single fittings Multiflex,
thermostatic valves RF/RFV6,
manual valves HRV with reduced
dimensions and return
temperature limiter valves

Copper pipe
Compression nut and
1) compression ring
Item. no. 10271..

for Rp 3/8 Rp 3/4 F, Page 1.140
Exception:
Multiflex single fittings
Copper pipe,
Collar nut, compression ring and 6
0
4
ring gasket 2
stainless steel Screwed 0
0
2
4
6
pipe, connection
for G 3/4 M according to DIN EN 16313
precision steel (cone Euro), soft sealing
pipe Item. no. 102744.
Page 1.141
1) Double nipple
Item. no. 15031..

Page 11.32
Collar nut, coompression ring and
PE pipe outlet
thin walled
plastic pipe for G 3/4 M according to DIN EN 16313
(cone Euro) Valves for water distribution
Item. no. 10277..
Page 1.141
OV ..
DN QC
Steel pipe
as well as Seal directly
screwed fittings
Other pipes
e. g. stainless steel All other pipes - with their special connection - may be connected with nipples
pipe, thick walled to Oventrop female threaded valves.
plastic pipe
1) Pipes with a wall thickness of 1 mm will need reinforcing sleeves, except when the soft sealing fitting 102744. is used! Page 1.141.
2017 1.147
Surface heating and cooling "Cofloor" Content
Page 2
2.a System summary

Content 2.05
System summary 2.06
2.b "Unidis" Surface heating system with local flow distribution

Content 2.09
"Unibox E BV" Room temperature control with bypass (exclusive) 2.10
"Unibox RLA" Flush-mounted box for isolation 2.10
"Unibox E T" Room temperature control (exclusive) 2.10
"Unibox T" Room temperature control 2.10
"Floorbox MH" Return collector 2.11
"Floorbox U" 2.12
Fixing channel 2.13
Fixing channel with isolating facility 2.14
Pipe connection press T-piece 2.15
Pipe connection press elbow 2.15
2.c "Unibox" Room temperature control with "Q-Tech"

Content 2.17
"Unibox TQ" Room temperature control 2.18
"Unibox Q plus" Room temperature and return temperature control 2.18
2.d "Unibox" Room temperature control

Content 2.19
"Unibox TSH" Room temperature control with "Uni SH" 2.21
"Unibox E plus" Room and return temperature control (exclusive) 2.22
"Unibox E vario" Room and return temperature control (exclusive, closed) 2.22
"Unibox E RTL" Return temperature control (exclusive) 2.22
"Unibox plus" Room and return temperature control 2.23
"Unibox RTL" Return temperature control 2.23
Conversion set "Unibox T" 2.24
Accessories 2.24
Valve inserts 2.26
Gland nut 2.26
Duo connection piece 2.26
2.e Room thermostats

Content 2.27
2017 2.01
2 Page
2.f Room thermostats with wireless transmitter, wireless receivers

Content 2.31
Accessories 2.34
"RP-C F" Wireless repeater 2.34
"R-Con" Wireless receiver 2.36
2.g Actuators
Content 2.37
Accessories 2.38
2.h "Cofloor" Systems, "Copex" Pipes and accessories

Content 2.39
"Cofloor" Base mat system 2.40
"Cofloor" Base mat system NP-R 2.43
"Cofloor" Tacker system 2.44
"Cofloor" Clamping rail system 2.45
"Cofloor" Dry-build system 2.46
Accessories 2.47
PE-Xc "Copex" Plastic pipes 2.49
PE-RT/AL/PE-RT "Copipe HSC" Composition pipes 2.49
PE-RT "Copert" Plastic pipes 2.50
"Ofix K" Compression fittings 2.51
Double nipples 2.52
"Cofit P" Press couplings 2.52
2.i "Multidis Fix" Distributor/collector systems

Content 2.53
"Multidis Fix B" Pre-assembled stainless steel distributor/collector fixed in a cabinet 2.54
2.02 2017
Page 2
2.j "Multidis SFQ" distributor/collector with "Q-Tech"

Content 2.55
"Multidis SFQ" Stainless steel distributor/collector 2.56
2.k "Multidis SF/SFB/SFI" Distributors/collectors

Content 2.57
"Multidis SF" Stainless steel distributor/collector 2.58
"Multidis SFB" Stainless steel distributor/collector 2.59
"Multidis SFI" Brass distributor/collector for industrial 2.59
surface heating and cooling systems
Accessories 2.60
"Optiflex" Ball valve 2.60
Valve insert for stainless steel distributors/collectors "Multidis SF" 2.61
Ball valves 2.61
Surface-mounted cabinets 2.62
Cylinder lock 2.63
Heat meter connection sets 2.64
Differential pressure relief device 2.65
Angle pattern connection set 2.65
"Hycocon VTZ" Double regulating and commissioning valve 2.65
"Hycocon DTZ" Differential pressure regulator 2.65
2.l "Regufloor" Control units

Content 2.67
"Regufloor H" 2.68
"Regufloor HW" 2.68
"Regufloor HN" 2.68
System components 2.69
"Regtronic EH" Heating circuit controller 2.70
"Regtronic RH" Heating circuit controller 2.70
"Regtronic EM" Extension module 2.70
Accessories 2.71
"Regufloor HC" 2.72
System components for "Regufloor HC" 2.72
"Tri-D TR" Three-way diverting valves PN 16 2.73
"Tri-M TR" Three-way mixing valves PN 16 2.73
"Tri-CTR" Three-way diverting and mixing valves PN 16 2.73
"Regufloor HX" 2.74
2.m Single components for distributors/collectors

OV
Content 2.75
2017 2.03
2 Page
Individual components for distributor systems 2.76

Accessories 2.77
2.n Regulating sets for surface heating systems

Content 2.79
Regulating sets for surface heating systems 2.80
2.o Return temperature limiter set

Content 2.83
Return temperature limiter set 2.84
Return temperature limiters 2.84
Valve inserts 2.84
Gland nut 2.84
2.p Components for concrete core activation

Content 2.85
"Multidis SFI" Brass distributor/collector for 2.87
industrial surface heating/concrete core activation
2.04 2017
Surface heating and cooling "Cofloor" 2.a System summary
Page 2
2.a System summary

Content
System summary 2.06
2017 2.05
2.a System summary
Surface heating and cooling "Cofloor" System summary
2
1
2 2
3
4
System illustration: Unidis Surface heating with return collector Floorbox MH, Unibox E BV and fixing channel
1 Floorbox MH Return collector
2 Unibox E BV
3 Fixing channel
4 Copipe Composition pipe
Copex PE-Xc pipe
Copert PE-RT pipe
1 Unibox E BV Unibox E BV
2 2
4 Supply
3
Return
Surface heating Surface heating
System illustration: Unidis Surface heating with Floorbox UH and Unibox E BV

1 Floorbox UH
2 Unibox E BV
3 Regumat F-130/180 Fixed value control unit
4 Copipe Composition pipe
Copex PE-Xc pipe
Copert PE-RT pipe
2.06 2017
2.a System summary
Surface heating and cooling "Cofloor" System summary
Examples of the application (further examples see product ranges Unibox, Multidis stainless steel distributors/collectors 2
and Combi-System)
4
Cofloor Surface heating with Unibox E plus
3
2
individual room temperature control
consisting of the Oventrop components:
1 Unibox E plus Installation set
2 Copex PE-Xc pipe
3 Ofix K Compression fittings
4 Base mat
1 5 Edge insulating strip
6 Protection pipe, slit
7 Pipe guiding elbow
8 Copipe HSC Composition pipe
9 Cofit P Press T-piece
3
Rcklauf
Supply
Vorlauf
Return
5 4 2 7
max. 70 C
8
6
Cofloor Surface heating and cooling with

stainless steel distributor/collector Multidis SF
9
consisting of the Oventrop components:
11 10
1 Multidis SF Stainless steel distributor/
12
collector
max. 55 C 2 Copex PE-Xc pipe
1
3 Ofix K Compression fitting
4 Tacker board
3
7 5 Edge insulating strip
6 Pipe guiding elbow
7 Cabinet
8
3 8 Electrothermal actuator
2
9 Room thermostat clock
6
10 Optibal Ball valve
4 11 Cofit P Press connection

5 12 Copipe HSC Composition pipe
2017 2.07
Surface heating and cooling "Cofloor" 2.b "Unidis" Surface heating system with local flow distribution
Page 2

Content
"Floorbox MH" Return collector 2.11
"Floorbox U" 2.12
Fixing channel 2.13
Fixing channel with isolating facility 2.14
Pipe connection press T-piece 2.15
Pipe connection press elbow 2.15
2017 2.09
Surface heating and cooling "Cofloor" 2.b "Unidis" Surface heating system with local flow distribution
2 Article kvs
kv
at 1K
kv
at 2K Article-No. Hint
P-dev. P-dev.
"Unibox E BV" Room temperature control with bypass (exclusive) Application:

Combination room temperature control For installations with flow temperatures
and presettable bypass suitable for surface heating systems
Depth: 57 mm according to DIN EN 1264.
Installation set consisting of:
0.81 0.34 0.57 1022662 Wall box unit with thermostatic valve with
integrated bypass stem and regulating insert,
working without auxiliary energy. Venting and
flushing valve, valve insulation, cover plate and
thermostat with '0' setting. Valve connection
G for Oventrop compression fittings. For the
division of the heating water volume flow into a
thermostatically controlled volume flow and a
bypass volume flow. The bypass volume flow
allows for the setting of a basic heat load (no
cooling down).
I-57-I "Unibox RLA" Flush-mounted box for isolation Installation set for the isolation of surface
Combination isolating and regulating function heating circuits in combination with
"Uniboxes".
Page 2.20.
"Unibox E T" Room temperature control (exclusive) Installation set consisting of:
Room temperature control Wall box unit with presettable thermostatic
valve, venting and flushing valve.
Page 2.20.
I-57-I "Unibox T" Room temperature control Installation set consisting of:
with thermostat "Uni LH" valve, venting and flushing valve, cover plate
and thermostat "Uni LH".
Page 2.20.
2.10 2017
Surface heating and cooling "Cofloor" "Floorbox MH" Return collector
Article Article-No. Hint 2
"Floorbox MH" Return collector The "Floorbox MH" is used for central
for "Unidis" surface heating consolidation of the individual heating circuit
returns together with "Uniboxes".
Central consolidation of heating circuit returns (Riser connection from the right and left hand
in the "Unibox" system, lateral riser connection side)
with one return collector (6-fold) 1027053 Installation set consisting of:
for 6 circuits -Cabinet
with two return collectors (4-fold each) 1027054 Supply:
for 8 circuits Ball valve with temperature sensor
with two return collectors (5-fold each) 1027055 connection
for 10 circuits 2-fold distributor for the connection of two
with two return collectors (6-fold each) 1027056 supply pipes to the boxes
for 12 circuits
Return:
Two return collectors (with flow measuring
and regulating inserts)
Fill and drain cock
Vent plug
"Hycocon VTZ" Double regulating and
commissioning valve
Meter stool piece
Ball valve

Surface heating and cooling "Cofloor" "Floorbox U"
2 Article Article-No. Hint
"Floorbox U" The "Floorbox" serves to connect each

Connection without distributor/collector dwelling to the surface heating system together
for surface heating systems with the installation sets "Unibox".
"Floorbox UH" lateral riser connection 1022668 Installation set consisting of:
Supply:
- Ball valve G 1 with temperature sensor
connection
Return:
- "Hycocon VTZ" Double regulating
and commissioning valve
lateral connection - Meter stool piece
- Ball valve with coupling
- Venting and flushing valve
"Floorbox UV" lower riser connection 1022669 - Flat seals
Depth: 110 - 145 mm

Width: 400 mm
Height: 350 mm
System illustration: page 2.06
lower connection For further information see

2.12 2017
Surface heating and cooling "Cofloor" Fixing channel
Fixing channel For heavyweight and lightweight walls, made of

galvanised steel sheet for pipework installation
for "Unibox", depth: 57 mm 1022653 out of the ground into the wall to the "Unibox".
An additionally required installation set of the
"Unibox" range has to be ordered separately
and has to be installed in the fixing channel.
Assembly without screws or rivets. Adaptation
to the installation height via an adjustable
extension. The adaptation to the installation
depth for heavyweight walls is carried out by
use of elbows. The fixing channel of lightweight
walls is screwed directly onto the profiles.
Additional cut-outs in the reverse side of the
fixing channel allow the connection of the
"Unibox" even from an adjoining room.
The "Unibox" has to be mounted in the fixing
channel only shortly before plastering
commences.
An exact installation of the "Unibox" is
guaranteed by the variable installation options.
The connection openings (rated break points)
of the fixing channel allow the connection of all
remote controls, remote sensors (mechanical
or electric).
Height: 440 - 490 mm (extendible)

Width: 160 mm
Sequence of installation (summary):
1 Adjust depth and height, align 2 Place fixing channel into the 3 Mount Unibox and both 4 Mount protection cover of the
with wall recess wall supply connection pieces Unibox and of the fixing channel
5 Carry out wall plastering 6 Lay supply pipe from the heat 7 Lay edge insulating strip and 8 Lay heating circuit, connect to
generator on the bare floor and system board supply connection piece and feed
insulate return to return collector
2017 2.13
Fixing channel with isolating facility
"Unibox E BV" Room temperature control with bypass
Surface heating and cooling "Cofloor" (exclusive)
Fixing channel with isolating facility For heavyweight and lightweight walls, made of
with cover plate and thermostat with remote control galvanised steel sheet for pipework installation
out of the ground into the wall to the "Unibox".
for "Unibox", depth: 57 mm 1022654
An addtional installation set of the "Unibox"
programme has to be ordered separately and
has to be fit into the fixing channel.
For this purpose, the "Unibox E BV" is available

without cover plate (see item no. 1022676).
For the connection without distributors/

collectors and the room to room isolation of
surface heating circuits.
Isolating facility consisting of:

Isolating valve, venting and flushing valve.
Valve connection G for Oventrop
Assembly without screws or rivets. Adaptation

to the installation height via an adjustable
extension. The adaptation to the installation
depth for heavyweight walls is carried out by
use of elbows. In case of of lightweight walls,
the fixing channel is screwed directly onto the
profiles. Additional cut-outs in the reverse side
of the fixing channel allow the connection of
the "Unibox" even from an adjoining room.
The "Unibox" has to be mounted in the fixing

channel only shortly before plastering
commences. A special cover plate for the
"Unibox" is supplied with the fixing channel.
An exact installation of the "Unibox" is
guaranteed by the variable installation options.
The connection openings (rated break points)
of the fixing channel allow for the connection of
all remote controls, remote sensors
(mechanical or electric).
Height: 440 - 490 mm (extendible)
Width: 160 mm
"Unibox E BV" Room temperature control with bypass (exclusive) Application:

without cover plate and thermostat For installations with flow temperatures
suitable for surface heating systems
Combination room temperature control 1022676 according to DIN EN 1264.
and presettable bypass Installation set for use in the fixing channel with
heating circuit isolation (item no. 1022654).

Wall box unit without cover plate, with
thermostatic valve with integrated bypass stem
and regulating insert, working without auxiliary
energy. Venting and flushing valve and valve
insulation. Valve connection G for Oventrop
For the division of the heating water volume

flow into a thermostatically controlled volume
flow and a bypass volume flow. The bypass
volume flow allows for the setting of a basic
heat load (no cooling down).
2.14 2017
Pipe connection press T-piece
Surface heating and cooling "Cofloor" Pipe connection press elbow
Pipe connection press T-piece Height: 321 mm

Stainless steel pipe: 15 x 1.0 mm
Pipe made of stainless steel, fitting made of brass
for composition pipe "Copipe", For a simple connection of the "Unibox" to the
with "Ofix CEP" - Snap & Seal - supply pipe or the heating loop via the fixing
compression fitting for male thread G channel.
according to DIN EN 16313 (cone "Euro") The pipes have to be shortened according to
the required installation height.
16 x 2.0 mm 1515153
20 x 2.5 mm 1515156
Pipe connection press elbow
Pipe made of stainless steel, fitting made of brass

for composition pipe "Copipe",
with "Ofix CEP" - Snap & Seal -
compression fitting for male thread G
according to DIN EN 16313 (cone "Euro")
16 x 2.0 mm 1515353
20 x 2.5 mm 1515356
2017 2.15
Surface heating and cooling "Cofloor" for automatic hydronic balancing
Page 2

Content
"Unibox TQ" Room temperature control 2.18
"Unibox Q plus" Room temperature and return temperature control 2.18
2017 2.17
"Unibox TQ" Room temperature control Application:

with "Q-Tech" for automatic hydronic balancing For installations with flow temperatures
Room temperature control suitable for surface heating systems
with thermostat "Uni LH" according to DIN EN 1264.
Depth: 57 mm
white 1022686 Wall box unit with presettable thermostatic
valve with valve insert "QA", venting and
flushing valve, cover plate and thermostat
"Uni LH" with '0' setting. Valve connection
G for Oventrop compression fittings.
For room temperature control.
"Q-Tech" function:
The valve insert "QA" is a combined control
and regulating insert which is used for room
temperature control in combination with
thermostats with liquid sensor or actuators.
The max. flow rate is set to the required
nominal value and is constantly maintained
within the necessary proportional band.
(room temperature)

presetting key supplied with the "Unibox".
"Unibox Q plus" Room temperature and return temperature "Unibox" individual room temperature
control control and limitation of return temperature
with "Q-Tech" for automatic hydronic balancing for surface heating systems.
Combination thermostat "Uni LH"
and thermostat "Uni RTLH" Application:
Depth: 57 mm In combination with heating systems with
radiator operation.
white 1022684
Wall box unit with presettable thermostatic
valve with valve insert "QA", RTLH valve,
venting and flushing valve, cover plate and
thermostats "Uni LH" and "Uni RTLH" with
'0' setting. Valve connection G for Oventrop
The RTLH valve insert with double disc
prevents inadvertent overheating, with frost
protection.
For room temperature control and return
temperature limitation.
Temperature range: 7-28 C
(room temperature)
Temperature range: 1040 C factory setting
(return temperature) may be increased to
50 C by cancelling the limitation (40 C).

presetting key supplied with the "Unibox".
2.18 2017
Surface heating and cooling "Cofloor" 2.d "Unibox" Room temperature control
Page 2

Content
"Unibox TSH" Room temperature control with "Uni SH" 2.21
"Unibox E plus" Room and return temperature control (exclusive) 2.22
"Unibox E vario" Room and return temperature control (exclusive, closed) 2.22
"Unibox E RTL" Return temperature control (exclusive) 2.22
"Unibox plus" Room and return temperature control 2.23
"Unibox RTL" Return temperature control 2.23
Conversion set "Unibox T" 2.24
Accessories 2.24
Valve inserts 2.26
Gland nut 2.26
Duo connection piece 2.26
2017 2.19
2 Article kvs
kv
at 1K
kv
P-dev. P-dev.
"Unibox E BV" Room temperature control with bypass (exclusive) "Unibox E" (exclusive model) and "Unibox"
Combination room temperature control individual room temperature control for
and presettable bypass surface heating systems
Depth: 57 mm
Application:
white For installations with flow temperatures
suitable for surface heating systems
0.81 0.34 0.57 1022662 according to DIN EN 1264.
Wall box unit with thermostatic valve with
integrated bypass stem and regulating insert,
working without auxiliary energy. Venting and
flushing valve, valve insulation, cover plate and
thermostat with '0' setting. Valve connection
G for Oventrop compression fittings. For the
division of the heating water volume flow into a
thermostatically controlled volume flow and a
bypass volume flow. The bypass volume flow
allows for the setting of a basic heat load (no
cooling down).
"Unibox RLA" Flush-mounted box for isolation Installation set consisting of:
Combination isolating and regulating function Wall box unit with isolating valve, venting and
Depth: 57 mm flushing valve and closed cover plate. Valve
connection G for Oventrop compression
white 1022663 fittings. For the isolation of surface heating
circuits in combination with the installation sets
"Unibox".
"Unibox E T" Room temperature control (exclusive) Installation set consisting of:
Depth: 57 mm valve, venting and flushing valve, valve
insulation, cover plate and thermostat with '0'
setting. Valve connection G for Oventrop
white 0.81 0.34 0.57 1022632
(room temperature)
"Unibox T" Room temperature control Installation set consisting of:

with thermostat "Uni LH" valve, venting and flushing valve, cover plate
Depth: 57 mm and thermostat "Uni LH" with '0' setting. Valve
white 1.10 0.36 0.67 1022636 fittings.
chrome 1.10 0.36 0.67 1022646 For room temperature control.
plated
(room temperature)
The models "Unibox E T", "Unibox T" and

"Unibox TSH" comply with the requirements of
the German Energy Saving Directive (EnEV
14).

Article kvs
kv
at 1K
kv
at 2K Article-No. Hint 2
P-dev. P-dev.
"Unibox TSH" Room temperature control with "Uni SH" Application:

Room temperature control For installations with flow temperatures
with thermostat "Uni SH" suitable for surface heating systems
Depth: 57 mm according to DIN EN 1264.
white Wall box unit with presettable thermostatic
valve, venting and flushing valve, angle pattern
0.81 0.34 0.57 1022612 adapter, frame, cover plate and thermostat
"Uni SH" with '0' setting. Valve connection G
for Oventrop compression fittings.
(room temperature)
The models "Unibox E T", "Unibox T" and
"Unibox TSH" comply with the requirements
of the German Energy Saving Directive
(EnEV 14).

2017 2.21
2 Article kvs
kv
at 1K
kv
P-dev. P-dev.
"Unibox E plus" Room and return temperature control (exclusive) "Unibox E" (exclusive model) individual
Combination room temperature control room temperature control and limitation of
and limitation of return temperature return temperature for surface heating
Depth: 57 mm systems
white 0.81 0.34 0.57 1022633 Application:

chrome 0.81 0.34 0.57 1022643 In combination with heating systems with
plated radiator operation.
stainless 0.81 0.34 0.57 1022673 Installation set consisting of:
steel finish Wall box unit with presettable thermostatic
valve and integrated return temperature limiter,
venting and flushing valve, valve insulation,
cover plate and thermostat with '0' setting.
Valve connection G for Oventrop
For the control of the room temperature and
limitation of the return temperature.
(room temperature)
20-40 C (return temperature)
"Unibox E vario" Room and return temperature control (exclusive, Installation set consisting of:
closed) Wall box unit with presettable thermostatic
Basic model for limitation of valve and integrated return temperature limiter,
return temperature (concealed) venting and flushing valve and closed cover
Depth: 57 mm plate. Valve connection G for Oventrop
white 0.81 0.34 0.57 1022634 For the control of the room temperature and
chrome 0.81 0.34 0.57 1022644 limitation of the return temperature.
plated Temperature range: 20-40 C
(return temperature)
Room temperature control is possible by mounting the following Room temperature depending on the used
thermostats (to be ordered separately): control.
Thermostat with remote control "Uni FH" For further information see
(page 2.77) "Technical information":
or:
room thermostat (page 2.28) and actuator

(page 3.89)
"Unibox E RTL" Return temperature control (exclusive) Installation set consisting of:
Limitation of return temperature (concealed) Wall box unit with integrated return
Depth: 57 mm temperature limiter, venting and flushing valve
and closed cover plate. Valve connection G
white 1022631 for Oventrop compression fittings.
chrome plated 1022641 For return temperature limitation.
Limitation of the return temperature from the outside: (return temperature).
page 2.23, item no. 1022635
The models
- "Unibox E plus"
- "Unibox E vario"
comply with the requirements of the German
Energy Saving Diretive (EnEV 14).
2.22 2017
Article kvs
kv
at 2K Article-No. Hint 2
P-dev.
"Unibox plus" Room and return temperature control "Unibox" individual room temperature
Combination thermostat "Uni LH" control and limitation of return temperature
and thermostat "Uni RTLH" for surface heating systems.
Depth: 57 mm
Application:
white 1.10 0.67 1022637 In combination with heating systems with
radiator operation.
Wall box unit with presettable thermostatic
valve and RTLH valve, venting and flushing
valve, cover plate and thermostats "Uni LH"
and "Uni RTLH" with '0' setting. Valve
fittings.
protection.
For the control of the room temperature and
limitation of the return temperature.
Temperature range: 728 C
(room temperature)
50 C by cancelling the limitation (40 C) .
Awards "Unibox Plus":
Interclima Paris
Trophe du Design
Interclima Paris
Concours de lInnovation
"Unibox RTL" Return temperature control Installation set consisting of:

with thermostat "Uni RTLH" Wall box unit with RTLH valve, venting and
Depth: 57 mm flushing valve, cover plate and thermostat "Uni
RTLH" with '0' setting. Valve connection G
white 1022635 for Oventrop compression fittings.
protection.
For return temperature limitation.
50 C by cancelling the limitation (40 C).
The models
"Unibox plus"
"Unibox vario"
comply with the requirements of the German
Energy Saving Directive (EnEV 14).

2017 2.23
Conversion set "Unibox T"
Surface heating and cooling "Cofloor" Accessories
2 Article
Packing
unit
Article-No. Hint
Conversion set "Unibox T" Position 1 - 4 are used for the conversion of a
"Unibox E RTL" to a "Unibox T".
for "Unibox E RTL" 1022639
consisting of:
1 Presettable thermostatic valve
4 5
oventrop
2 Thermostat "Uni LH"

12
3 Spacer, screws
4 White cover plate
A "Unibox E RTL" can be re-assembled by use
5 Wall box unit of the valve dismounted before and positions
6 Bracket 5 - 7.
7 Protection cover plate
Accessories
Fixing channel
for "Unibox", depth: 57 mm 1022652 Made of galvanised steel sheet, with cover
made of gypsum plaster board.
Height: extendible between 275 and 350 mm
Width: 130 mm
for "Unibox", depth: 57 mm 1022653 Made of galvanised steel sheet

Height: extendible between 440 and 490 mm
Width: 160 mm
Pipe conduit unit
for "Unibox", depth: 57 mm 1022650 Suitable for the wall box units.
For a simple installation of the pipe into the
wall. May be easily reduced to other
dimensions.
L = 1 m.
Cover plates
white (RAL 9016) 1022687 For "Unibox E BV", "Unibox E plus", and
"Unibox E T" with depth 57 mm.
closed
white (RAL 9016) 1022679 For "Unibox E vario" with depth 57 mm.
white (RAL 9016) 1022689 For "Unibox E RTL" with depth 57 mm.
white (RAL 9016) 1022693 For "Unibox RTL", "Unibox T",

"Unibox plus", "Unibox TQ" and
"Unibox Q plus" with depth 57 mm.
white (RAL 9016) (2) 1022691 For "Unibox RTL", "Unibox T" and
"Unibox plus" with depth 110 mm.
Cover plate with thermostat with remote control
2.24 2017
Article
Packing
unit
Article-No. Hint 2

may be liminted or locked.
white (25) 1027165 Temperature range:
chrome plated (25) 1027172 10 C - 40 C factory setting
(return temperature) may be increased
to 50 C by cancelling the limitation (40 C).
Thermostat "Uni LH"
white (10) 1011465 with '0' setting

Busse Design Ulm
bd Longlife Design Award
Model: Thermostat Uni LH


2017 2.25
Valve inserts
Gland nut
Surface heating and cooling "Cofloor" Duo connection piece
2 Article
kv
at 2K
Packing
unit
Article-No. Hint
P-dev.
Valve inserts

0.67 (100) 1187047#

0.65 (100) 1187057# #These valve inserts are suitable for all valve
sizes of the thermostatic valves "A, AV 9, AQ,
Valve insert RTLH (100) 1026970 Special valve insert for reversed supply and
return pipe for "Unibox RTL".
"Unibox E T"
"AV6U" 0.52 (100) 1187077 "Unibox E plus"
"Unibox E BV"
"Unibox T"
"Unibox TQ"
Extensions
L = 20 mm
for thermostatic valves (10) 1022698 For "Unibox T", "Unibox plus", "Unibox TQ"
for RTLH valves (10) 1022699 For "Unibox RTL", "Unibox vario", "Unibox TQ"
Gland nut
Set = 5 pieces (10) 1026986
Duo connection piece
For the connection of two heating circuits.

1 x G collar nut 2 x G male thread 1022655

Surface heating and cooling "Cofloor" 2.e Room thermostats
Page 2

Content
2017 2.27
Surface heating and cooling "Cofloor" Room thermostats (heating)
2 Article
Packing
unit
Article-No. Hint
Room thermostats (heating)
for individual room temperature control of
with daily setting heating systems in combination with the
electrothermal actuators (two point)
230 V (78) 1152551 "Aktor T 2P". Output signal pulse-width
modulation.
with weekly setting Temperature range: 5 C up to 30 C
Heating:
230 V (78) 1152552 Use electrothermal actuators (two point)
24 V 1152554 closed with current off.
Central temperature setback is carried out
230 V (25) 1152051 "Aktor T 2P".
Heating:
for 24 V).
Cooling:
230 V (128) 1152071 limiting elements.
24 V (128) 1152072
230 V (40) 1152561
100 up to 230 V AC
Heating:
2.28 2017
Surface heating and cooling "Cofloor" Room thermostats (heating/cooling)
Article
Packing
unit
Article-No. Hint 2
1012705/06, page 1.28 (may also be
2017 2.29
2.f Room thermostats with wireless transmitter, wireless
Surface heating and cooling "Cofloor" receivers
Page 2
2.f Room thermostats with wireless transmitter, wireless receivers

Content
Accessories 2.34
2017 2.31
2
Heating zone 1 Heating zone 2
a a
b c
Heating/cooling
24 V / 230 V
C/O signal
e

Heat-
pump
a R-Tronic RT B / R-Tronic RTF B / R-Tronic RTFC K Wireless thermostat

b R-Con Wireless receiver
c R-Con HC Extension module heating/cooling
d FK-C F Wireless window contact
e Aktor T 2P (two point) Electrothermal actuator
f Multidis SF Stainless steel distributor/collector
g RP-S F Wireless repeater
2.32 2017

setback.
setback.
"R-Tronic RTFC K" Wireless thermostat with humidity and CO2 Electronic wireless thermostat "R-Tronic
Power supply:
with wall bracket
Power supply:
"R-Tronic RTFC K".
with table stand
1150684
1150884#

receivers
Accessories
"FK-C F" Wireless window contact
Surface heating and cooling "Cofloor" "RP-C F" Wireless repeater
2 Article
Packing
unit
Article-No. Hint

wireless thermostats "R-Tronic RT B/ RTF B"
(100-240 V ~ /50-60 Hz) (100-240 V ~/ 50-60 Hz).
with wall bracket

"i-Tronic TFC" and
Compatible with:
("DynaTemp HA")
Note:
"RP-C F" Wireless repeater The repeater serves to amplify the EnOcean
oventrop radiograms and is for instance used to increase
the radio range between wireless window
230V
50Hz
L N
for EnOcean (50) 1153060
wireless technology, contacts and the wireless room modules.
flush mounting,
230 V/ 50 Hz
2.34 2017
receivers
Surface heating and cooling "Cofloor" "Synet CR" Gateway

communication.

automatically.
Access options:
User interfaces:
Interfaces:
-LAN
-USB for WLAN stick
b. Client mode
-Mains adaptor 5 V
Installation options:
fixing plate.
2017 2.35
receivers
Surface heating and cooling "Cofloor" "R-Con" Wireless receiver
"R-Con" Wireless receiver Electronic multichannel wireless receiver for

room temperature control of up to 8
230 V, without plug, wiring on site independent heating zones (surface heating)
according to adjustable timed programmes
4 channels with logic module 1150770 at the wireless thermostats "R-Tronic RT B",
4 channels without logic module 1150771 "R-Tronic RTF B" and "R-Tronic RTFC K".
8 channels with logic module 1150772 Operation via the menu-driven wireless
8 channels without logic module 1150773 thermostat.
Additional functions (direct selection via the

rotary switches at the wireless receiver):
-Pump logic with adjustable lead time
and follow-up time (only item no.
1150770/ 72)
-Burner logic for heat demand
(only item no. 1150770/ 72)
-Two point control
-PWM control for surface heating
Electrothermal actuators "Aktor T 2P" 24 V or

230 V can be connected to the 8 channels
(closing contact with 4A/250 V AC each).
An external transformer is required for the

power supply of 24 V actuators.
"R-Con HC" The extension module is connected to the

Extension module heating/cooling for wireless receiver "R-Con" and is used for
wireless receiver "R-Con" switching between heating and cooling
In preparation. operation via a C/O signal (change-over input).
The C/O signal is povided by a reversible heat
1150774 pump (volt free).
Furthermore, the "R-Con HC" module features
an input for dew point monitoring which
interrupts cooling when the dew point is
exceeded.
2.36 2017
Surface heating and cooling "Cofloor" 2.g Actuators
Page 2
2.g Actuators
Content
Accessories 2.38
2017 2.37
2.g Actuators
"Aktor T" Electrothermal actuators
2 Article
Packing
unit
Article-No. Hint
Oventrop electrothermal actuators are used for

"Aktor T 2P" Electrothermal actuators (two point) heating, ventilation and air conditioning. The
connection thread M 30 x 1.5 actuators serve to control the room
temperature and can be used e. g. with
"H NC", closed with current "off", 230 V 1012415 conventional radiators, radiators with
"L NC", closed with current "off", 24 V 1012416 integrated distributor, radiant ceiling panels,
chilled ceiling systems and induction air
thermostats.
installations.
Accessories
Connecting block (6 control zones)

for room thermostats and actuators
24 V/ 230 V, heating (25) 1400980
Connecting block (10 control zones)

for room thermostats and actuators
230 V, heating/cooling, (25) 1400981

pump control
24 V, heating/cooling, (25) 1400982
pump control
2.38 2017
Surface heating and cooling "Cofloor" 2.h "Cofloor" Systems, "Copex" Pipes and accessories
Page 2

Content
"Cofloor" Base mat system 2.40
"Cofloor" Base mat system NP-R 2.43
"Cofloor" Tacker system 2.44
"Cofloor" Clamping rail system 2.45
"Cofloor" Dry-build system 2.46
Accessories 2.47
PE-RT/AL/PE-RT "Copipe HSC" Composition pipes 2.49
PE-RT "Copert" Plastic pipes 2.50
"Ofix K" Compression fittings 2.51
Double nipples 2.52
"Cofit P" Press couplings 2.52
2017 2.39
Surface heating and cooling "Cofloor" "Cofloor" Base mat system
2 Article
Packing
unit
Article-No. Hint
"Cofloor" Base mat system Suitable for concrete and liquid screed
for fixing 14 and 16 mm pipes complying with standards.
with the possibility of 45 diagonal laying
without auxiliary material
Laying distances 5, 10, 15, 20, 25, 30 cm
Base mat NP-35 Thermal resistivity:

1.0 x 1.0 m = 1.0 m R = 0.85 (m K)/W.
with thermal and sound insulation
made of expanded polystyrene,
thermal conductivity group 040, thickness: 35-2 mm,
covered with polystyrene foil, building material class B2
according to DIN 4102
Max. load: 5 kN/m (10) 1402210 Only sold in units of 10 base mats per box.

1.0 x 1.0 m = 1.0 m R = 0.75 (mK)/W

1.0 x 1.0 = 1.0 m R = 0.314 (m K)/W.
with thermal insulation made of expanded polystyrene,
thermal conductivity group 035, thickness: 11 mm,
Base mat NP
1.0 x 1.0 m = 1.0 m
without thermal insulation made of
made of moulded polystyrene foil (18) 1402110 Only sold in units of 18 base mats per box.
Compensation element 35 For fixing of the connection pipes in front of the

1.0 x 1.0 m folded, distributor/collector and for laying in doorways.
thermal conductivity group 040,
thickness: 35-2 mm,
covered with foil (5) 1402290
Compensation element 30
1.0 x 1.0 m folded
thickness: 30-2 mm
Compensation element 11
1.0 x 1.0 m folded,
thickness: 11 mm,
2.40 2017
Article
Packing
unit
Article-No. Hint 2
Connection element for (10) 1402391 For the connection of butt-jointed base mats.
base mat
Door and distributor/collector (10) 1402392 For use in doorways and the distributor/
connection element collector area.
Fixing hook set for base mats For fixing heating pipes onto insulation boards
plastic > 30 mm, for instance in front of the distributor/
for 14 and 16 mm pipes collector.
1 bag = 200 pieces 1409082 For further information see

2017 2.41
2 Article
Packing
unit
Article-No. Hint
"Cofloor" Base mat system Suitable for concrete and liquid screed
for fixing 14, 16 and 17 mm pipes complying with standards.
with the possibility of 45 diagonal laying
without auxiliary material
Laying distances 6, 12, 18, 24, 30 cm

1.44 x 0.84 m = 1.2 m R = 0.75 (m K)/W.
Max. load: 5 kN/m (8) 1402430* Only sold in units of 8 base mats per box.

1.44 x 0.84 = 1.2 m R = 0.314 (m K)/W.
with thermal insulation made of expanded polystyrene,
thermal conductivity group 035, thickness: 11 mm,
Max. load: 45 kN/m (8) 1402330* Only sold in units of 8 base mats per box.
Base mat NP
1.44 x 0.84 m = 1.2 m
made of moulded polystyrene foil (14) 1402130* Only sold in units of 14 base mats per box.
Connection element for (10) 1402393* For the connection of butt-jointed base mats.
base mat
Door and distributor/collector (10) 1402394* For use in doorways and the distributor/
connection element collector area.

"Cofloor" Base mat system NP-R
Surface heating and cooling "Cofloor" "Ofix K" compression fittings
Article
Packing
unit
Article-No. Hint 2
"Cofloor" Base mat system NP-R The perforation of the base mats allows a
Thin layered system simple application and a safe bonding of the
Pre-punched base mat without levelling compound and the existing ground.
thermal insulation with foil overlap on both sides,
for fixing 12 mm pipes Tested minimum construction heights:
with the possibility of 45 diagonal laying -Knauf levelling compound Alphadur 430
without auxiliary material min. 17 mm
-PCI periplan extra min. 18 mm
Laying distances 5, 10, 15 cm -Weber-Maxit weber.floor min. 18 mm
-Knauf levelling screed 425 min. 21 mm
Further products on request!
The laying advice must be observed.
Base mat NP-R Only sold in units of 10 base mats per box.
1.0 x 1.0 m = 1.0 m
without thermal insulation
made of moulded polystyrene foil,
with adhesive layer on reverse
(10) 1402010
Edge insulating strip Only sold in units of 5 rolls per bag.

with adhesive edge
and integrated fleece back
height: 50 mm, thickness: 5 mm
length per roll 20 m (5) 1401990
PE-RT "Copert" Plastic pipe Application:

with oxygen barrier Surface heating and cooling.
Pipes according to
rolls DIN 16833 / DIN 16834 / DIN 4721.
Oxygen tight according to DIN 4726.
Dimension 12 x 2.0 mm Max. operating pressure ps: 6 bar at 70 C
For the connection of two heating circuits.

1 x G collar nut 2 x G male thread 1022655
"Ofix K" compression fittings

12 x 2 mm (10) 1027772
2017 2.43
Surface heating and cooling "Cofloor" "Cofloor" Tacker system
2 Article
Packing
unit
Article-No. Hint
"Cofloor" Tacker system Suitable for concrete and liquid screed

for fixing 14, 16, 17 and 20 mm pipes complying with standards.
Base mat roll and folded board with laminated tissue foil,
with imprinted laying screen (screen distance 5 cm),
foil overlap on the edge,
with adhesive strip on the opposite
Laying distances 5, 10, 15, 20, 25, 30 cm
Base mat roll

10.0 x 1.0 m = 10.0 m
made of expanded polystyrene according to DIN EN 13163,
building material class B2 according to DIN 4102 Thermal Thermal Max.
resistivity conductivity load
group
Thickness 20-2 mm 1402515 R = 0.50 (mK)/W 040 5 kN/m
Folded board
2.0 x 1.0 m = 2.0 m
building material class B2 according to DIN 4102 Thermal Thermal Max.
resistivity conductivity group load
Thickness 35-3 mm (5) 1402600 R = 0.78 (mK)/W 045 4 kN/m
Only sold in units of 5 boards per foil bag.
For fixing the heating pipes onto the base mat

Tacker machine 1402597 roll or folded board by use of tacker hooks.
Tacker hooks For fixing the heating pipes onto the base mat
plastic roll or folded board by use of the tacker
for 14, 16, 17 and 20 mm pipes machine.
Only sold in packing units.
1 magazine = 30 pieces (10) 1402591
10 magazines = 300 pieces (20) 1402592 For further information see
2.44 2017
Surface heating and cooling "Cofloor" "Cofloor" Clamping rail system
Article
Packing
unit
Article-No. Hint 2
For fixing the heating pipes onto the base mat

Tacker machine 1402596* roll or folded board by use of tacker hooks.
Tacker hooks For fixing the heating pipes onto the base mat
heat-welded, plastic, roll or folded board by use of the tacker
for 14, 16, 17 and 20 mm pipes machine.
Only sold in packing units.
10 magazines = 300 pieces (20) 1402594*
Tape gun For bonding the linings of the base mat rolls or
for tapes insulation boards.
with a width of 50 mm 1402598
Adhesive tape For bonding the linings of the base mat rolls or
insulation boards to prevent penetration of
50 mm x 66 m (36) 1402599 screed water.
"Cofloor" Clamping rail system
Self-adhesive clamping rail made of polypropylene, For fixing the heating pipes onto the insulation.
clamping distance 5 cm, length 1 m
for 14 mm pipe (100) 1402580
for 16 mm pipe (100) 1402581

Surface heating and cooling "Cofloor" "Cofloor" Dry-build system
2 Article
Packing
unit
Article-No. Hint
"Cofloor" Dry-build system For laying of surface heating systems on solid

for fixing 14 mm "Copipe" composition pipes or timber beam floors as a dry-build system
(reduced overall thickness, for instance
Laying distances 12.5, 25 cm renovation of existing buildings) or with heating
screed according to DIN 18560 on a
membrane made of polystyrene.
Taking certain installation conditions into
consideration, the dry-build system is also
suitable for wall heating and cooling systems.
Dry-build element Element for serpentine or spiral laying of the

1000 x 500 x 25 mm heat conducting strips and elbows. For
made of expanded polystyrene according to DIN EN 13163, "Copipe HSC" composition pipe 14 x 2 mm.
thermal conductivity group 035, Thermal resistivity: R = 0.5 (mK)/W.
building material class B1 according to DIN 4102
Only sold in units of 10 boards wrapped up in a
Max. load: 60 kN/m (10) 1402800 plastic foil.
Heat conducting strip For laying "Copipe HSC" composition pipe

998 x 122 x 0.4 mm 14 x 2 mm and for improvement of the
made of galvanised sheet steel heat transmission by a large surface covering
of the dry-build elements.
with pre-punched break points (48) 1402850
in the grooves Only sold in units of 48 strips per box.
Heat conducting elbow For serpentine laying of the "Copipe HSC"

110 x 245 x 0.5 mm composition pipe 14 x 2 mm in the edge areas.
made of galvanised sheet steel (25) 1402855 Only sold in units of 25 elbows per box.
Infill panel Only sold in units of 19 panels wrapped up in a

1000 x 500 x 25 mm plastic foil.
thermal conductivity group 035, max. load 60 kN/m,
building material class B1 according to DIN 4102
(19) 1402857
Membrane As separation layer between dry-build system

made of polyethylene 0.2 mm and concrete or liquid screed.
Dimensions of roll 25 m x 4 m 1402895
Manual tool for cutting individual pipe ducts

Hot cutting machine 1402891 into the infill panel.

2.46 2017
Article
Packing
unit
Article-No. Hint 2
Accessories
Edge insulating strip Suitable for concrete and liquid screed

with bonded foil and perforation, complying with DIN EN 1264-4/ DIN 18560 T2.
height: 150 mm, thickness: 10 mm,
made of polyethylene foam
Edge insulating strip with perforation The self-adhesive polyethylene flap allows
self-adhesive on the wall side, sealing of the junction between the base mat
with self-adhesive polyethylene flap, and and the edge insulating strip when laying
height: 150 mm, thickness: 10 mm, liquid screed.
Expansion strip To provide screed joints according to DIN EN

with adhesive edge, 1264-4 / DIN 18560 T2.
height: 120 mm, thickness: 10 mm,
length: 1.20 m (20) 1402091
Protective tube For protecting the pipe

made of LDPE - at junction points of screed joints
according to DIN EN 1264-4 /
Length: 300 mm, slotted, (20) 1501184 DIN 18560 T 2
for 14, 16 and 17 mm pipes - at the entry points when set in concrete
- at the exit points when set in concrete
Only sold in units of 20 protective tubes

per bag.
Round profile Serves as sealing between base mat and edge

made of polystyrene foam 20 mm insulating strip when using concrete screed.
Dispenser of 150 m 1402092 Only sold in units = 1 dispenser.
Pipe guiding elbow For the inversion and fixing of the "Copert"
plastic amd "Copex" pipes in case of 90 bends, for
instance in front of the distributor/collector and
for 14 - 16 mm pipes (50) 1409085 in screed passages.
Set = 10 pieces
for 20 mm pipe (10) 1409086
Set = 10 pieces
for 26 mm pipe (10) 1409087
Set = 10 pieces
Marker point for measuring screed humidity To mark the points of measurement of humidity
plastic of the screed.
Set = 5 pieces (10) 1409090
Calculation software
for the design of surface heating systems 1409999
2017 2.47
2 Article
Packing
unit
Article-No. Hint
Screed additive For homogenization and improvement of the

Additional component workability as well as for increase of the
to produce concrete screed concrete screed density.
for heated underfloor constructions
Content of canister 10 l 1409095
2.48 2017
PE-Xc "Copex" Plastic pipes
Surface heating and cooling "Cofloor" PE-RT/AL/PE-RT "Copipe HSC" Composition pipes
Article
Packing
unit
Article-No. Hint 2
PE-Xc "Copex" Plastic pipes Application:

rolls Pipes according to DIN 16892 / DIN 16893 /

DIN EN ISO 15 875 / EN1264-4
(except for dimension 26).
Oxygen tight according to DIN 4726
(all dimensions).
Dimension 14 x 2 mm Max. operating pressure ps:

6 bar at 90 C
length per roll 120 m (120) 1400051 10 bar at 60 C

6 bar at 90 C

6 bar at 90 C

6 bar at 90 C

6 bar at 90 C
PE-RT/AL/PE-RT "Copipe HSC" Composition pipes Application:

Central heating systems with circulation pump,
surface heating and cooling systems as well as
rolls sanitary installations.
Dimension 14 x 2 mm DVGW tested (dimensions 14 x 2.0 mm

and 17 x 2.0 mm).
length per roll 50 m (50) 1541054 DVGW approved (dimensions 16 x 2.0 mm
length per roll 100 m (100) 1540154 and 20 x 2.5 mm).
length per roll 200 m (200) 1540254 DVGW reg.-no.: DW-8501 AT2407

6 bar at 90 C
length per roll 200 m (200) 1540255 Oxygen tight three-layered composition pipe
length per roll 500 m (500) 1540555 inner layer made of PE-RT
aluminium pipe welded end to end
outer coating made of PE-RT bonded by
Dimension 17 x 2 mm
adhesive layers
Dimension 20 x 2.5 mm

2017 2.49
Surface heating and cooling "Cofloor" PE-RT "Copert" Plastic pipes
2 Article
Packing
unit
Article-No. Hint
PE-RT "Copert" Plastic pipes Application:

rolls Pipes according to

DIN 16833/DIN 16834.
Dimension 14 x 2 mm Oxygen tight according to DIN 4726.
length per roll 240 m (240) 1402052 Max. operating pressure ps: 6 bar at 70 C
Dimension 16 x 2 mm

Dimension 17 x 2 mm

Dimension 20 x 2 mm
Other sizes, for instance for the installation of risers: page 13.06.
Press and screwed fittings: from page 13.09.
Tools, e. g. pipe cutter, pipe shears, universal tool for deburring

and calibrating: from page 13.35.
Coil unwinder For rolls up to 600 m.

for pipes Completely dismountable and collapsible.
fixed 1402096
mobile 1402098
Transport chart 1402099
2.50 2017
"Ofix K" Compression fittings
Surface heating and cooling "Cofloor" "Cofit S" Compression fittings
Article
Packing
unit
Article-No. Hint 2
"Ofix K" Compression fittings For the connection of the "Copex" PE-Xc pipes
for G male thread according to DIN EN 16313 (cone "Euro") and the "Copert" PE-RT pipes to the
distributor/collector and for couplings.
Ofix K for plastic pipes according to DIN 4726, PE-X according to The permissible operating pressures and
DIN 16892/16893, PB according to DIN 16968, PP according to DIN operating temperatures depend on the
8078 A1, collar nut nickel plated, metal to metal sealing plus O-ring application classes of the respective standands
14 x 2 mm (10) 1027755 EN ISO 15875).
16 x 2 mm (10) 1027757
17 x 2 mm (10) 1027759
20 x 2 mm (10) 1027763

14 x 2 mm (10) 1027775
16 x 2 mm (10) 1027777
17 x 2 mm (10) 1027779
20 x 2 mm (10) 1027783
"Cofit S" Compression fittings For the connection of the pipes to the
for G male thread according to DIN EN 16313 (cone "Euro"), distributor/collector and for couplings.
for "Copipe" composition pipes and, provided similar (Interior of plastic pipes must be deburred.)
preparation is used, for plastic pipes,
metal to metal sealing plus O-ring,
compression ring and collar nut made of brass
Collar nut nickel plated
14 x 2.0 mm x G c/nut (10) 1507954

16 x 2.0 mm x G c/nut (10) 1507955
17 x 2.0 mm x G c/nut (10) 1507959
Collar nut unplated
14 x 2.0 mm x G c/nut (10) 1507974

16 x 2.0 mm x G c/nut (10) 1507975
2017 2.51
Double nipples
Surface heating and cooling "Cofloor" "Cofit P" Press couplings
2 Article
Packing
unit
Article-No. Hint

for G male thread according to DIN EN 16313 (cone "Euro"),
for "Copipe" composition pipes and, provided similar
preparation is used, for plastic pipes,
2-fold, metal to metal sealing plus O-ring,
compression ring and collar nut made of brass,
collar nut nickel plated
14 x 2.0 mm x G collar nut (10) 1507934

16 x 2.0 mm x G collar nut (10) 1507935
17 x 2.0 mm x G collar nut (10) 1507937
18 x 2.0 mm x G collar nut (10) 1507938
20 x 2.0 mm x G collar nut (10) 1507939
20 x 2.5 mm x G collar nut (10) 1507940
Double nipples
Double nipple, brass, nickel plated Port G with tapered sealing according to
DIN EN 16313 (cone "Euro").
G male x G male (10) 1028263
Double nipple, bronze, unplated
G male thread x G male (25) 1504054

thread
"Cofit P" Press couplings (Interior of plastic pipes must be deburred.)

for "Copipe HSC" composition pipes and, provided
similar preparation is used, for plastic pipes, Further sizes see page 11.12.
dimension 16 and 20 x 2.5 mm made of bronze,
dimension 14, 17 and 20 x 2.0 mm made of brass resistant
to dezincification, casing made of stainless steel
Press coupling
Suitable press bits:
14 x 2 mm x 14 x 2 mm (10) 1512542 Item no. 1519489 ( 14 x 2 mm)
20 x 2.5 mm x 20 x 2.5 mm (10) 1512545 Item no. 1519492 ( 20 x 2.5 mm)
2.52 2017
Surface heating and cooling "Cofloor" 2.i "Multidis Fix" Distributor/collector systems
Page 2

Content
"Multidis Fix B" Pre-assembled stainless steel distributor/collector fixed in a cabinet 2.54
2017 2.53
"Multidis Fix B" Pre-assembled stainless steel distributor/
Surface heating and cooling "Cofloor" collector fixed in a cabinet
"Multidis Fix B" Pre-assembled stainless steel distributor/ Application:

collector fixed in a cabinet Stainless steel distributor/collector for surface
for surface heating and cooling systems (basic configuration) heating and cooling systems.
Pre-assembled and ready for connection with stainless steel Max. operating temperature ts: 80 C
distributor/connector "Multidis SF", ball valves, actuators,
connecting block for actuators, fixed in a flush-mounted cabinet Installation set consisting of:
for 2 circuits 1406152* Flush-mounted cabinet

for 3 circuits 1406153* Stainless steel distributor/collector "Multidis
for 4 circuits 1406154* SF" with integrated flow measuring and
for 5 circuits 1406155* regulating devices 0 - 5 l/min in the flow
for 6 circuits 1406156* distributor
for 7 circuits 1406157* Ball valves DN 20
for 8 circuits 1406158* "Aktor T 2P" electrothermal actuators,
for 9 circuits 1406159* closed with current "off", 230 V
for 10 circuits 1406160* Connecting block
for 11 circuits 1406161*
for 12 circuits 1406162*

Page 2

Content
"Multidis SFQ" Stainless steel distributor/collector 2.56
2017 2.55
Surface heating and cooling "Cofloor" "Multidis SFQ" Stainless steel distributor/collector
"Multidis SFQ" Stainless steel distributor/collector Application:

for surface heating and cooling systems Stainless steel distributor/collector for surface
with "Q-Tech" for automatic hydronic balancing heating and cooling systems.
flat sealing, with valve inserts M 30 x 1.5 Max. operating pressure ps: 6 bar (PN 6)
for thermostatic and electronic control Max. operating temperature ts: 80 C
Flow range: 0,5 - 5 l/min
for 4 circuits 1404754 Distributor/collector pre-assembled. With fill
for 5 circuits 1404755 and drain valves.
for 6 circuits 1404756 Heating circuit connections G male thread
for 7 circuits 1404757 for Oventrop compression fittings.
for 8 circuits 1404758 Flow distributor with integrated isolating
for 9 circuits 1404759 facilities. Return collector with integrated
for 10 circuits 1404760 valve inserts. Brackets (loosely added)
for 11 circuits 1404761 soundabsorbing according to DIN 4109.
Cabinets and dimension chart: page 2.62
2.56 2017
Surface heating and cooling "Cofloor" for surface heating and cooling systems
Page 2

Content
"Multidis SFB" Stainless steel distributor/collector 2.59
"Multidis SFI" Brass distributor/collector for industrial 2.59
surface heating and cooling systems
Accessories 2.60
Valve insert for stainless steel distributors/collectors "Multidis SF" 2.61
Ball valves 2.61
Surface-mounted cabinets 2.62
Cylinder lock 2.63
Heat meter connection sets 2.64
Differential pressure relief device 2.65
Angle pattern connection set 2.65
"Hycocon VTZ" Double regulating and commissioning valve 2.65
"Hycocon DTZ" Differential pressure regulator 2.65
2017 2.57
"Multidis SF" Stainless steel distributor/collector
Surface heating and cooling "Cofloor" "Multidis SF" Stainless steel distributor/collector
"Multidis SF" Stainless steel distributor/collector Application:

with integrated regulating inserts in the flow distributor heating and cooling systems.

for 4 circuits 1405554 and drain valves. Heating circuit connections
for 5 circuits 1405555 G male thread for Oventrop compression
for 6 circuits 1405556 fittings.
for 7 circuits 1405557 Flow distributor with integrated regulating
for 8 circuits 1405558 inserts. Return collector with integrated valve
for 9 circuits 1405559 inserts. Brackets (loosely added) sound-
for 10 circuits 1405560 absorbing according to DIN 4109.
for 12 circuits 1405562 Cabinets and dimension chart: page 2.62

with integrated flow measuring and regulating devices 0-5 l/min.
in the flow distributor
flat sealing, with valve inserts M 30 x 1.5
for thermostatic and electronic control

2.58 2017
"Multidis SFB" Stainless steel distributor/collector
"Multidis SFI" Brass distributor/collector for industrial
Surface heating and cooling "Cofloor" surface heating and cooling systems
"Multidis SFB" Stainless steel distributor/collector Application:

with heating circuit valves with presettable heating and cooling systems.
bypass and integrated regulating inserts in Max. operating pressure ps: 6 bar (PN 6)
the flow distributor Max. operating temperature ts: 80C
flat sealing, with valve inserts M 30 x 1.5 Setting of a minimum volume flow via the
for thermostatic and electronic control bypass at the heating circuit valve
guaranteeing a perfect operation of heat
for 2 circuits 1405452 pumps and a basic heat load of the underfloor
for 3 circuits 1405453 heating (no cooling down).
for 11 circuits 1405461 inserts. Return collector with integrated valve
for 12 circuits 1405462 inserts with presettable bypass. Brackets
(loosely added) sound-absorbing according to
DIN 4109.
Cabinets and dimension chart: page 2.62
"Multidis SFI" Brass distributor/collector for industrial Application:

surface heating and cooling systems Central heating systems with circulation pump
flat sealing distributor/collector modules, flow distributor with and cooling systems.
ball valves and return collector with regulating valves, Max. operating pressure ps: 6 bar (PN 6)
extension to max. 20 circuits by connecting the distributor/collector Max. operating temperature ts: 90 C
modules
Description:
for 2 circuits 1414452 Pre-assembled distributor/collector modules,
for 3 circuits 1414453 one port G 2 male thread, one port G 2 collar
for 4 circuits 1414454 nut, with G blind plug.
for 5 circuits 1414455 Flow distributor with ball valves. Return
for 6 circuits 1414456 collector with regulating valves.
Heating circuit connections with G 1 male
thread for Oventrop compression fittings.

2017 2.59
2 Article
Packing
unit
Article-No. Hint
Accessories
Console Consoles with 2 pipe clamps each including

sound insulation supports and quick acting
for "Multidis SFI" brass 1414490 lock.
distributor/collector Wall attachment included.
2-fold, steel galvanised,
adjustable height and depth
Cap G 2 female thread
for "Multidis SFI" brass distributor/ 1414493 For closing the distributor/collector.
collector, 2-fold, brass
Ball valve
flat sealing
DN 50 G2FxG2M 1406586 For the isolation of the flow distributors and

return collectors.
"Optiflex" Ball valve For filling and venting.

brass, handle with stop
self sealing, with coutnernut,

with hose connection (soft seal)
and cap
DN 15 (50) 1033314
"Cofit S" Compression fittings For the connection of the "Copex" PE-Xc
for "Copex" PE-Xc plastic pipes, plastic pipes to the distributor as well as for
2-fold, metal to metal sealing plus O-ring, couplings.
outlet bronze / brass resistant to dezincification,
brass compression ring,
brass collar nut, unplated
20 x 3.0 mm x G 1 collar nut (10) 1507969

26 x 3.0 mm x G 1 collar nut (10) 1507979
2.60 2017
Surface heating and cooling "Cofloor" Ball valves
Article
Packing
unit
Article-No. Hint 2
Valve insert for stainless steel distributors/collectors "Multidis

SF"
Brass (25) 1404091

Stainless steel (25) 1404092
Coupling For the connection of two stainless steel

distributors/collectors "Multidis SF" (do not
nickel plated exceed a maximum of 12 heating circuits in
total).
G male x G 1 male (50) 1407206
Ball valves
flat sealing
DN 20 GFxG1M (10) 1406383

DN 25 G1FxG1M (10) 1406384

with red T-handle
DN 20 GFxG1M 1406483
DN 25 G1FxG1M 1406484

with blue T-handle
DN 20 GFxG1M 1406583
DN 25 G1FxG1M 1406584
flat sealing,
with sensor connection M 10 x 1.0
DN 25 G1FxG1M (10) 1406708
Ball valve
for "Multidis SF/SFB" stainless steel distributor/collector
with cone "Euro" Ball valve for the isolation of the heating
circuits at the distributor/collector. Heating
G male x G collar nut (50) 1406504 circuit connection G male thread according
to DIN EN 16313 (cone "Euro") for Oventrop
compression fittings. Distributor/collector
connection with collar nut G and O-ring seal.
2017 2.61
Flush-mounted cabinets
Surface heating and cooling "Cofloor" Surface-mounted cabinets
Flush-mounted cabinets Depth: 115 180 mm

steel, galvanised, frame and doors white lacquered Height: 760 885 mm
removable screen
When using heat meter connection sets, the
No. 1: inner width: 560 mm 1401151 sum of the installation length and the length of
No. 2: inner width: 700 mm 1401152 the distributor have to be taken into
No. 3: inner width: 900 mm 1401153 consideration.
32
50
200
max. 83
G1
G 3/4
52
Outlet Length (L) No. Length (L) No.

with ball valve
1406384
2 168 mm 1 248 mm 1
3 218 mm 1 298 mm 1
4 268 mm 1 348 mm 1
5 318 mm 1 398 mm 1
6 368 mm 1 448 mm 1
7 418 mm 1 498 mm 2
8 468 mm 2 548 mm 2
9 518 mm 2 598 mm 2
10 568 mm 2 648 mm 3
11 618 mm 3 698 mm 3
12 668 mm 3 748 mm 3
No. of cabinets
Surface-mounted cabinets Depth: 160 mm

Surface-mounted model Height: 760 870 mm
steel, galvanised, frame and doors white lacquered
When using heat meter connection sets, the
No. 1: inner width: 600 mm 1401171 sum of the installation length and the length of
No. 2: inner width: 750 mm 1401172 the distributor have to be taken into
No. 3: inner width: 1000 mm 1401173 consideration.
no. 4: inner width: 1250 mm 1401174
2.62 2017
"Regubox" Exclusive cabinet Dimensions (W x H x D):

630 mm x 900 mm x 170 mm
with white, frameless, opaque and lockable glass door The mounting set for installation during
construction for floor-standing installation (item
Frame surface made of brushed stainless steel, no. 1341099) or wall attachment (item no.
without rear wall 1341199) is to be ordered separately.
Surface-mounted model 1341098 Awards:

for dwelling stations "Regudis W-HTU" and ISH Frankfurt 2015
"Regudis W-HTF" with constant temperature
heating circuit and for stainless steel distributors/ ICONIC AWARDS 2015
collectors "Multidis SF" with a maximum of
6 heating circuit connections (angle pattern GERMAN DESIGN AWARD
connection set, item no. 1404780, taken into SPECIAL 2016
account)
iF Design Award 2016
Mounting set for installation during construction for "Regubox"

steel sheet, galvanised
Floor-standing installation, 1341099 Only for "Regubox", item no. 1341098.

adjustable height
Wall attachment 1341199 With screen for covering the lower connection
channel of the "Regubox" in case of wall
attachment.
Dimensions (W x H x D):
Surface-mounted model 1341298* 900 mm x 600 mm 170 mm
for stainless steel distributors/collectors "Multidis SF" The mounting set for installation during
with a maximum of 9 heating circuit connections construction for floor-standing installation
(angle pattern connection set, item no. 1404780, (item no. 1341099) is to be ordered separately.
taken into account)
Mounting set for installation during construction for "Regubox" Only for "Regubox", item no. 1341298.
Floor-standing installation 1341299*

adjustable height
Cylinder lock
with key
for surface-mounted cabinets 1401190 Only suitable for surface-mounted cabinets

(1401171-74) manufactured since November 2011.
for flush-mounted cabinets 1401191
(1401151-54)

Surface heating and cooling "Cofloor" Heat meter connection sets
Heat meter connection sets Heat meter connection sets are suitable for left
for "Multidis SF/SFB" stainless steel distributors/collectors for surface and right hand side connection to the
heating and cooling systems as well as for "Multidis SH" stainless distributor/collector.
steel distributors/collectors for radiator connection
Set no. 1 consists of:
Set no. 1 Supply
with double regulating and commissioning valve - Ball valve with temperature sensor
Hycocon VTZ connection M 10 x 1.0, for sensor
5.0 / 5.2 mm directly immersing
Angle pattern:
Return
with ball valves DN 20 1404578 "Hycocon VTZ" Double regulating and
with ball valves DN 25 1404580 commissioning valve
Meter stool piece
Ball valve with temperature sensor
connection M 10 x 1.0, for sensor
Straight pattern: 5.0 / 5.2 mm directly immersing
Flat seals
with ball valves DN 20 1404579
Set no. 2 Set no. 2 consists of:

with differential pressure regulator Hycocon DTZ Supply
Angle pattern: connection M 10 x 1.0, for sensor
with ball valves DN 25 1404680 Measuring adapter
Return
"Hycocon DTZ" Differential pressure
regulator
Capillary
Meter stool piece
Flat seals
Straight pattern:

with pressure independent control valve Cocon QTZ Supply
- Ball valve with temperature sensor
Angle pattern: connection M 10 x 1.0, for sensor
DN 25, 150 - 1050 l/h 1404880
DN 25, 180 - 1300 l/h 1404882* Return
- "Cocon QTZ" Pressure independent
control valve
- Meter stool piece
- Ball valve with temperature sensor
- Flat seals
Straight pattern:
DN 25, 150 - 1050 l/h 1404881

DN 25, 180 - 1300 l/h 1404883*

"Hycocon VTZ" Double regulating and commissioning valve
Surface heating and cooling "Cofloor" "Hycocon DTZ" Differential pressure regulator
Article kvs
Packing
unit
Article-No. Hint 2

with pressure independent control valve "Cocon QTZ"
and connection fitting G 1 male x G 1 collar nut Supply
-Ball valve with temperature sensor
Angle pattern connection M 10 x 1.0 for sensor
DN 25, 150 - 1050 l/h 1694890*
DN 25, 180 - 1300 l/h 1694892* Return
-"Cocon QTZ" Pressure independent
control valve
-Meter stool piece
-Ball valve with temperature sensor
connection M 10 x 1.0 for sensor
-Flat seals
Note:
Not suitable for Oventrop distributors/
collectors.
Straight pattern:
DN 25, 150 - 1050 l/h 1694891*

DN 25, 180 - 1300 l/h 1694893*
Differential pressure relief device Differential pressure relief device for the right
for "Multidis SF/SFB" stainless steel distributors/collectors hand side connection to the distributor/
collector.
G male thread 1404790 To avoid flow noises.
Control range: 50-400 mbar
Angle pattern connection set Angle pattern connection set for a bottom
connection to the distributor/collector when
using surface-mounted cabinets.
for "Multidis SF/SFB" stainless steel distributors/collectors for surface
heating and cooling systems as well as for "Multidis SH" stainless
steel distributors/collectors for radiator connection
1404780
"Hycocon VTZ" Double regulating and commissioning valve "eco" measuring technique:
with infinitely adjustable presetting Information: page 3.98.
"eco" measuring technique
both ports with integrated pressure test points and drain valves Operating temperature:
-10 C up to +120 C
both ports male thread, flat sealing
General information:
DN 20 2.70 (10) 1061856 Body and bonnet made of brass resistant to
dezincification.
Male thread G 1.
"Hycocon DTZ" Differential pressure regulator "eco" measuring technique:

nominal value: 50 to 300 mbar, infinitely adjustable Information: page 3.98.
with integrated pressure test point and drain valve Operating temperature:
-10 C up to +120 C
both ports male thread without collar nut
General information:
DN 20 2.70 1062156 Body and bonnet made of brass resistant to
dezincification.
Male thread G 1.

Surface heating and cooling "Cofloor" 2.l "Regufloor" Control units
Page 2

Content
"Regufloor H" 2.68
"Regufloor HW" 2.68
"Regufloor HN" 2.68
System components 2.69
Accessories 2.71
"Regufloor HC" 2.72
System components for "Regufloor HC" 2.72
"Regufloor HX" 2.74
2017 2.67
"Regufloor H"
"Regufloor HW"
Surface heating and cooling "Cofloor" "Regufloor HN"
2 Article
Packing
unit
Article-No. Hint
"Regufloor H" Application ("Regufloor H and HW"):

Control unit DN 25 Heating Fixed value control unit for connection to
for connection to the stainless steel distributor/collector the stainless steel distributor/collector for
surface heating systems.
with high-efficiency pump (5) 1151300 Connection of 2 - 12 heating circuits.
Wilo-Yonos PARA RS 15/6, 130 mm Length: 315 mm
(Energy Efficiency Index EEI 0.23 Depth: 145 mm
according to EC Regulation 641/2009) Pump length: 130 mm
Max. operating pressure: 6 bar
with Wilo pump E15/ 1-5 1151000 Max. differential pressure: 0.75 bar
(export model, only for sales outside Max. flow temperature:
the European Union) Primary side: 90 C
Secondary side: 50 C
Control range temperature controller:
("Regufloor H" only): 2050 C
Control range electric pipe contact
safety switch: 2090 C
Description ("Regufloor H"):

"Regufloor HW" Pre-assembled and tested fixed value control
Control unit DN 25 Heating unit with electronic pump, three-way diverting
valve, check valve, temperature controller with
as above, but with contact sensor. Electric pipe contact safety
weather guided control for connection switch for max. limitation of the flow
to the stainless steel distributor/collector temperature.
with high-efficiency pump 1151800 Description ("Regufloor HW"):

Wilo-Yonos PARA RS 15/6, 130 mm and As "Regufloor H" but three-way diverting valve
heating circuit controller "Regtronic RH" with electromotive actuator (three point),
(Energy Efficiency Index EEI 0.23 heating circuit controller with outdoor sensor
according to EC Regulation 641/2009) and flow temperature sensor.
with Wilo pump E15/1-5 and 1151500

heating circuit controller "Regtronic EH"
(export model, only for sales outisde
the European Union)
"Regufloor HN" Application:

Control unit DN 25 Heating Fixed value control unit for connection to
for connection to the stainless steel distributor/collector the stainless steel distributor/collector for
surface heating systems.
with high-efficiency pump 1151600 Connection of 2 - 12 heating circuits.
Wilo-Yonos PARA RSB 15/6, 130 mm Length: 195 mm
(Energy Efficiency Index EEI 0.23 Depth: 100 mm
according to EC Regulation 641/2009) Axial pump housing
Permissible pressure difference:
200 kPa (2 bar)
Max. flow temperature:
Primary side: 90 C
20 - 50 C
Control range electric pipe contact
safety switch: 20 - 90 C
Description ("Regufloor HN"):

Pre-assembled and tested fixed value control
unit with electronic pump with axial pump
housing, three-way diverting valve, check
valve, temperature controller with contact
sensor. Electric pipe contact safety switch for
max. limintation of the flow temperature.
2.68 2017
Surface heating and cooling "Cofloor" System components
System components For the isolation of the supply and return,

use Oventrop ball valves
item no. 1406383 DN 20 and
item no. 1406384 DN 25.
T-connection piece 1151080 With check valve and sensor point.
Three-way diverting valve
with S-connection fitting 1151081
Temperature controllers Control range 2050 C.

Only supplied as replacement.
with contact sensor 1151082
Pump without pump cable.

Wilo E15/1-5 1151086 Only supplied as replacement.
(export model, only for sales
outside the Europan Union)
Only for "Regufloor HN", item no. 1151600.

High-efficiency pump 1151089
Wilo-Yonos PARA Pump without pump cable.
with axial pump housing Only supplied as replacement.
(Energy Efficiency Index EEI 0.23
according to EC Regulation 641/2009)
Pump without pump cable.

High-efficiency pump 1151088 Only supplied as replacement.
Wilo-Yonos PARA
(Energy Efficiency Index EEI 0.23
according to EC Regulation 641/2009)
Including cabling for Wilo pump E15/1-5.

Electric pipe contact safety switch 1151087
Bracket
T-connection piece 1151085
2017 2.69
"Regtronic EH" Heating circuit controller
"Regtronic RH" Heating circuit controller
Surface heating and cooling "Cofloor" "Regtronic EM" Extension module
"Regtronic EH" Heating circuit controller Weather-guided control of the flow

temperature of the heating system by
with 1 outdoor sensor and 3 additional sensors (NTC 5000) activation of a heat generator and/or a mixing
valve.
230 V 1152092
"Regtronic RH" Heating circuit controller Weather guided flow temperature control of the
heating system via the demand of a heat
with 1 outdoor sensor 1152093 generator and/or a mixing valve (e.g. "Regumat
and 3 additional sensors (PT 1000) M3" or "Regufloor HW" with three-way mixing
valve). Controller for wall attachment with data
with 1 outdoor sensor, 1152090 bus (S-bus).
2 additional sensors (PT 1000) Basic functions: 1 variable and 1 constant
and remote control including room temperature sensor (PT 1000) temperature heating circuit with heat demand.
Extendable by "Regtronic EM". The status can
be viewed via a full graphic display.
ErP classication heating circuit controllers Regtronic RH and Regtronic EH Interfaces: S-bus, SD-card slot for data
Boiler control recording
Required
Item no. Controller
accessories
modulating
On/Off
ErP % Class Inputs: 8 sensor inputs (PT 1000, KTY, switch
(0-10 V) or remote control), inputs for electronic volume
1152092 Regtronic EH X 1.5 III flow sensor/pressure sensor and irradation
Adapter cable sensor
1152093 Regtronic RH X 2.0 II
1152086 Outputs: 4 solid-state relays (speed controlled),
1152093 Regtronic RH X 1.5 III 1 standard relay (volt free), 2 PWM outputs for
Regtronic RH the speed controlled activation of high-
Adapter cable
1152090 incl. remote control with X 4.0 VI efficiency pumps. Both PWM outputs can be
1152086
room temperature sensor switched to 0-10 V.
Regtronic RH
1152090 incl. remote control with X 3.5 VII For the connection of high-performance
room temperature sensor
pumps (> 1A) see load relay, page 6.74.
2 x room
Regtronic RH temperature
1152090 incl. remote control with sensor 1152095 X 5.0 VIII
room temperature sensor Adapter cable
1152086
"Regtronic EM" Extension module "Regtronic EM" for the extension of the heating
circuit controller "Regtronic RH" by 6 sensor
for the connection to the heating circuit 1152098 inputs and 5 relay outputs.
controller "Regtronic RH" This allows the activation of further variable
and constant temperature heating circuits.
Up to five extension modules can be
connected to the heating circuit controller
"Regtronic RH".
1 sensor attached to the pipe PT 1000 is
included.

Accessories
Room temperature sensor 1152095 Room temperature sensor for fixing on level
PT 1000 surfaces (surface mounting).
Remote control with room temperature sensor

Remote control with 1152096 PT 1000 for the connection to the electronic
room temperature sensor controllers "Regtronic RH, RM and RS" for a
PT 1000 comfortable control of the heating curve of the
controller from the living area. When increasing
the heating curve, the flow temperature is
increased and vice versa. The remote control
also features the functions "heating circuit off"
and "party position".
2017 2.71
"Regufloor HC"
Surface heating and cooling "Cofloor" System components for "Regufloor HC"
"Regufloor HC" Application:

Control unit DN 25 Heating/Cooling Control unit for flow temperature control of
for connection to the stainless steel distributor/collector surface heating systems or alternatively of
surface cooling systems in combination with
with high-efficiency pump 1152100 the Oventrop stainless steel distributors/
Wilo-Yonos PARA RS 15/6, 130 mm collectors. Pre-assembled and tested control
(Energy Efficiency Index EEI 0.23 unit with electronic pump and three-way
according to EC Regulation 641/2009) diverting valve.
Suitable for the connection of 2 - 12 heating
with Wilo pump E15/1-5 1152000 circuits to two-, three- and four-pipe systems
(export model only for sales outside Heating and Cooling.
the European Union)
Length: 315 mm
Max. differential pressure: 0.75 bar
Max. flow temperature:
Primary side: 90 C
System components for "Regufloor HC"

"L NC", closed with current "off", 24 V 1012416 integrated distributor, radiant ceiling panels,
chilled ceiling systems and induction air
thermostats.
installations.
Including cabling for Wilo pump E15/1-5.

Electric pipe contact safety switch 1151087
"Sensor GA FD" Dew point control 24 V Is required in combination with room

thermostats to protect chilled ceilings against
with alternating contact 1141951 condensation.
An actuator interrupting the cooling water flow
is for instance activated in combination with
the "Regufloor HC".
Connection to the cooling water supply.
2.72 2017
System components
"Tri-D TR" Three-way diverting valves PN 16
"Tri-M TR" Three-way mixing valves PN 16
Surface heating and cooling "Cofloor" "Tri-CTR" Three-way diverting and mixing valves PN 16
Article kvs
Packing
unit
Article-No. Hint 2
System components Oventrop electromotive actuators are used for

"Aktor M" Electromotive actuators actuators serve to control the room
with manual setting, adjustable mode of operation conventional radiators, radiators with
"ST L", 24 V, modulating proportional 1012705 surface heating (except for item no.
actuator, 0-10 V, 1012710/11), radiant ceiling panels, chilled
automatic anti-blocking function and ceiling systems and induction air systems.
recognition of neutral point, Further application in bivalent heating
multiple characteristic lines adjustable installations.
"ST L", 24 V, modulating proportional 1012706 The actuators (0-10 V) can be used in
actuator, 0-10 V, with position feedback, centralised building control systems in
automatic anti-blocking function and combination with the electronic room
recognition of neutral point, thermostat, item no. 1152151/53, or with a
mutiple characterstic lines adjustable central controller.
"3P L", 24 V, three point actuator, 1012708 The actuator opens and closes the valve
without anti-blocking function completely once every 24 hours.
without anti-blocking function, With the appropriate control, the actuator, item
mode of operation not adjustable no. 1012708, can also be used for two point
operation.
In case of electric emergeny function, the
actuator returns to zero position if the power
supply is interrupted.
"Tri-D TR" Three-way diverting valves PN 16 Application:
bronze Max. operating pressure ps: 16 bar (PN 16)
with collar nuts, flat sealing Diverting respectively changing-over
("Tri-D TR") or mixing ("Tri-M TR") of
DN 20 4.50 1130206 volume flows in heating and cooling
DN 25 6.50 1130208 systems in combination with thermostatic
DN 40 9.50 1130212 or electric actuators.
OV
I II
III

bronze

with collar nuts, flat sealing
Male thread:
DN 20 4.50 1131706 G1
DN 25 6.50 1131708 G1
OV
DN 40 9.50 1131712 G2
AB A
"Tri-CTR" Three-way diverting and mixing valves PN 16 Function:

bronze For use as diverting valve, the three-way valve
has one inlet port (AB) and two outlet ports
connection thread M 30 x 1.5 (A and B). Depending on the position of the
with collar nuts, flat sealing valve disc, the direction of flow is diverted from
one to the other outlet port.
DN 15 (10) 1131204 For use as mixing valve, the three-way valve
DN 20 (10) 1131206 has two inlet ports (A and B) and one outlet
DN 25 (10) 1131208 port (AB). Depending on the position of the
DN 32 (5) 1131210 valve disc, the cold and hot water is mixed.
DN 40 (5) 1131212
DN 50 (5) 1131216 The three-way valves "Tri-CTR" can be used
for high differential pressures.

Surface heating and cooling "Cofloor" "Regufloor HX"
"Regufloor HX" Application:

Control unit DN 25 Heating Fixed value control unit for the operation
for connection to the stainless steel distributor/collector of open vented surface heating systems in
For flow temperature control of heating systems (separate circuits).
surface heating systems, with heat exchanger. Installation on the left hand side of the
distributor/collector.
with high-efficiency pump 1151065
Wilo-Yonos PARA RS Ku 15/6, 130 mm Connection of 2-12 heating circuits.
(Energy Efficiency Index EEI 0.23 Max. operating pressure:
according to EC Regulation 641/2009) Primary side: 6 bar
Secondary side: 3 bar
with Wilo pump E15/1-5 1151060
(export model, only for sales Max. flow temperature:
outside the European Union) Primary side: 90 C
2050 C
Description:
Pre-assembled and tested fixed value control
unit with electronic pump (plastic body).
Heat exchanger, diaphragm expansion tank

(3 l), pressure gauge, safety valve.
2.74 2017
Surface heating and cooling "Cofloor" 2.m Single components for distributors/collectors
Page 2

OV
Content
Individual components for distributor systems 2.76
Accessories 2.77
2017 2.75
Surface heating and cooling "Cofloor" Individual components for distributor systems
2 Article
Packing
unit
Article-No. Hint
Individual components for distributor systems Distributor systems for central heating
systems.
Brass automatic airvent
with automatic shut off If not stated otherwise, all products are made
of brass.
G (10) 1088303
Vent plug G
self sealing, set = 10 pieces 1400392

and cap
DN 10 (50) 1033313
Flow valve AZ Valve for the flow distributor of

for thermostatic control surface heating systems.
DN 15 GMxGF (25) 1400164
Return flow lockshield valve Combi 2 Lockshield valve for the return collector
with presetting and isolating facility of underfloor heating systems.
DN 15 GMxGF (25) 1401194
Brass terminal distributor/collector G 1 female thread

OV
G male thread for circuit connection
G female thread for airvent connection
4 outlets (2) 1400554
OV
Brass distributor/collector G 1 female thread x G 1 male thread
G male thread for circuit connection
2 outlets (2) 1400652
3 outlets (2) 1400653

OV
4 outlets (2) 1400654

OV
Terminal cap G 1 female thread (10) 1400691

G female thread for airvent connection
OV
G female thread for fill and drain ball valve connection
Ball valve DN 25 (10) 1406394

with coupling
flat sealing
Bracket Bracket with mounting clip.

For the installation of the distributor/collector
steel, galvanised 1401061 into the cabinet or onto the wall.
Sound absorbing as per DIN 4109.
2.76 2017
Article
Packing
unit
Article-No. Hint 2
Accessories Thermostats with remote control and with

remote transmission are especially suitable for
trench heaters, encased radiators and surface
Thermostat with remote control "Uni FH" heating systems.
2
3 4 white Max. heating water temperature: 120 C
5
1
0
capillary 2 m long 1012295 with '0' setting
capillary 5 m long 1012296
white,
2
3 4
capillary 5 m long 1012396 For further information see
5
1
Manual heads The manual head allows the subsequent

white conversion to actuators or thermostats without
the necessity to drain the system.
Contact thermometer
60
40 80
20 100 for distributors/collectors (50) 1404095
0 C 120
oventrop
Coupling
DN 15 (G c/nut x R M) (50) 1019304
Blind plug G
self sealing (100) 1401704
Cap G female thread 1400692 To close outlets not in use.

(not illustr.)
Cap G 1 female thread (10) 1400693 Can be used instead of the cap, but does not
(not illustr.) allow the connection of an airvent or a fill and
drain ball valve.
Ring spanner
2017 2.77
Surface heating and cooling "Cofloor" 2.n Regulating sets for surface heating systems
Page 2
2.n Regulating sets for surface heating systems

Content
Regulating sets for surface heating systems 2.80
2017 2.79
Regulating sets for surface heating systems Application:

with bypass valve The regulating set with bypass valve is required
for the control of the flow temperature of a
Set no. 1 surface heating system, for instance in
combined radiator/surface heating systems.
for surfaces up to 85 m 1144251 The required flow temperature is set at the
temperature controller. The electric pipe
contact safety switch switches the circulation
consisting of: pump off as soon as the set flow temperature
is exceeded. The bypass valve serves to
Valve DN 15, brass, nickel plated regulate the flow rate of the surface heating
straight pattern circuit.
item no. 1180104 (M 30 x 1.5)
Example:
Bypass valve DN 20, brass, nickel plated
Temperaturregler
Temperature controller with
straight pattern mit Anlegefhler
contact sensor
item no. 1027666 Supply Electric pipe contact
Elektrischer
valve
Vorlaufventil safety switch
Rohranlegeregler
5 4 3 Temperature controller
oventrop
with contact sensor Bypass
and heat transfer unit valve
Bypassventil
capillary 2 m long
Flow temperature limiting
control range 2050 C Vorlauftemperaturbegrenzung
item no. 1142861 (M 30 x 1.5)
Electric pipe contact safety switch For further information see

with concealed temperature setting "Technical information":
control range 2090 C
item no. 1143000
Set no. 2
for surfaces up to 120 m 1144252
consisting of:
Valve DN 20, brass, nickel plated

straight pattern
item no. 1187106 (M 30 x 1,5)
Bypass valve DN 25, brass, nickel plated

5 4 3
straight pattern
oventrop item no. 1027668
Temperature controller
with contact sensor
and heat transfer unit
capillary 2 m long
item no. 1142861 (M 30 x 1.5)
Electric pipe contact safety switch

with concealed temperature setting
item no. 1143000
2.80 2017
Regulating set for surface heating systems Application:

with "Tri-D TR" three-way diverting valve The regulating set with "Tri-D TR" three-way
diverting valve is required for the control of the
Set no. 3 flow temperature of a surface heating system,
for instance in combined radiator/surface
I
OV
II
for surfaces up to 200 m 1144253 heating systems. The required flow
III temperature is set at the temperature
controller. The electric pipe contact safety
consisting of: switch switches the pump off as soon as the
set flow temperature is exceeded. Depending
Three-way diverting valve Tri-D TR on the setting of the temperature controller, the
DN 20 bronze three-way diverting valve divides the volume
item no. 1130206 (M 30 x 1.5) flow into a return flow and a bypass flow. The
check valve installed in the bypass prevents a
5 4 3
wrong flow against the three-way diverting

oventrop
Temperature controller
with contact sensor valve.
and heat transfer unit
capillary 2 m long Example:
item no. 1142861 (M 30 x 1.5) Electric pipe contact
safety switch
Electric pipe contact safety switch

with concealed temperature setting
Non-return check valve
item no. 1143000
Piston type spring assisted check valve DN 20 Tri-D TR Three-

Temperature
way diverting valve
bronze/brass controller with
contact sensor
item no. 1072006
2017 2.81
Surface heating and cooling "Cofloor" 2.o Return temperature limiter set
Page 2

Content
Return temperature limiter set 2.84
Return temperature limiters 2.84
Valve inserts 2.84
Gland nut 2.84
2017 2.83
Return temperature limiter set
Return temperature limiters
Thermostat "Uni RTLH"
Surface heating and cooling "Cofloor" Thermostat "Uni RTL"
2 Article
kv
at 2K
Packing
unit
Article-No. Hint
P-dev.
Return temperature limiter set Application:

Central heating systems,
Reversed angle connection combined radiator/surface heating.
consisting of: Max. operating pressure ps: 10 bar (PN 10)
Reversed angle pattern valve for the return pipe and Valve insert with double disc prevents
thermostat Uni RTLH inadvertent overheating, with frost protection.
Thermostat "Uni RTLH" with '0' setting,
0.30 1028364 may be limited or locked.
Control range:
10 C-40 C factory setting
(return temperature) max be increased
to 50 C by cancelling the limitation (40 C).
Straight pattern connection For further information see

consisting of: "Technical information":
Straight pattern valve for the return pipe and

thermostat Uni RTLH
DN 15 0.30 1028464
Return temperature limiters Application:

Valves for thermostats "Uni RTLH" Central heating systems,
connection thread M 30 x 1.5 combined radiator/surface heating systems.
brass, nickel plated Max. oprating pressure ps: 10 bar (PN 10)
Reversed angle pattern valve for the return pipe Valve insert with double disc prevents
inadvertent overheating, with frost protection.
DN 10 0.30 (25) 1024363

DN 15 0.30 (25) 1024364
Straight pattern valve for the return pipe
DN 10 0.30 (25) 1024463

DN 15 0.30 (25) 1024464

10-40 C factory setting
white (25) 1027165 (return temperature) may be increased
chrome plated (25) 1027172 to 50 C by cancelling the limitation (40 C).
Thermostat "Uni RTL" With '0' setting,

RTL valves with connection thread M 30 x 1.0
white (25) 1027100 are no longer produced.
Valve inserts
Gland nut
for all RTLH valves
Set = 5 pieces (10) 1026986
2.84 2017
Surface heating and cooling "Cofloor" 2.p Components for concrete core activation
Page 2

Content
"Multidis SFI" Brass distributor/collector for 2.87
2017 2.85
2 Article
Packing
unit
Article-No. Hint
"Multidis SF" Stainless steel distributor/collector Application:

for surface heating systems/concrete core activation Stainless steel distributor/collector for surface
with integrated regulating inserts (flow distributor) heating and cooling systems.

for 8 circuits 1405558 inserts.
for 9 circuits 1405559 Return collector with integrated valve inserts.
for 10 circuits 1405560 Bracket (loosely added) sound-absorbing
for 11 circuits 1405561 according to DIN 4109.
Further distributors/collectors for surface
heating systems: page 2.58

Pipes according to DIN 16892/DIN 16893/
rolls DIN EN ISO 15875/EN 1265-4.
Oxygen tight according to DIN 4726 (all
dimensions).
Further dimensions: page 2.49
6 bar at 90 C
"Cofit S" Compression fittings For the connection of the "Copex" PE-Xc
for "Copex" Pe-Xc plastic pipes, plastic pipes to the distributor/collector and for
brass compression ring and collar nut,
collar nut nickel plated
17 x 2.0 mm x G collar nut (10) 1507937
2.86 2017
"Multidis SFI" Brass distributor/collector for
Article
Packing
unit
Article-No. Hint 2
"Multidis SFI" Brass distributor/collector for Application:

industrial surface heating/concrete core activation Brass distributor/collector for surface heating
Distributor/collector modules flat sealing, and cooling systems.
flow distributor with ball valves, Max. operating pressure ps: 6 bar (PN 6)
return collector with regulating valves, Max. operating temperature ts: 90 C
extension to max. 20 circuits by connecting
the distributor/collector modules Description:
Distributor/collector modules pre-assembled.
for 2 circuits 1414452 One port G 2 male thread, one port G 2 collar
for 3 circuits 1414453 nut with G blind plug.
for 4 circuits 1414454 Flow distributor with ball valves.
for 5 circuits 1414455 Return collector with regulating valves.
for 6 circuits 1414456 Heating circuit connections with G 1 male
thread for Oventrop compression fittings.

Pipes according to DIN 16892/DIN 16893/
DIN EN ISO 15875/EN 1264-4 (except for
rolls dimension 26).
Oxygen tight according to DIN 4726 (all

dimensions).
6 bar at 90 C

6 bar at 90 C

6 bar at 90 C
10 bar at 20 C
"Cofit S" Compression fittings For the connection of "Copex" PE-Xc plastic
for "Copex" PE-Xc plastic pipes, pipes to the distributor/collector and for
outlet bronze / brass resistant to dezincification,
brass compression ring,
brass collar nut, unplated
20 x 3.0 mm x G 1 collar nut (10) 1507969

26 x 3.0 mm x G 1 collar nut (10) 1507979
Console Consoles with 2 pipe clamps each including

sound insulation supports and quick acting
for "Multidis SFI" brass 1414490 lock.
distributor/collector Wall attachment included.
2-fold, steel galvanised,
adjustable height and depth
Cap G 2 female thread
for "Multidis SFI" brass distributor/ 1414493 For closing the distributor/collector.
collector, 2-fold, brass
2017 2.87
Surface heating and cooling "Cofloor" "Optiflex" Ball valve
2 Article
Packing
unit
Article-No. Hint
Ball valve
flat sealing
DN 50 1406586 For the isolation of the flow distributors and

G2FxG2M return collectors.
"Optiflex" Ball valve For filling and venting.


and cap
DN 15 (50) 1033314
2.88 2017
Hydronic balancing in heating
and cooling systems Content
Page
3.a System summary 3

Content 3.05
Functions, constructions etc. 3.06
Combinations of the components/Integration into systems 3.08
3.b "Hycocon" Control, regulating and isolating valves

Content 3.11
"Hycocon VTZ" Double regulating and 3.12
commissioning valves PN 16
"Hycocon VPZ" Double regulating and 3.12
"Hycocon ATZ" Isolating and orifice valves PN 16 3.13
"Hycocon APZ" Isolating and orifice valves PN 16 3.13
"Hycocon ETZ" Regulating valves PN 16 3.14
"Hycocon HTZ" Regulating valves PN 16 3.14
"Hycocon DTZ" Differential pressure regulators PN 16 3.15
Insulation shells 3.16
Accessories 3.17
Valve inserts suitable for "Hycocon" valves 3.19
Measuring and draining unit 3.20
"Hycocon" Combination summary connection thread M 30 x 1.5 3.22
"Hycocon" System illustration of examples / Conversion possibilities 3.23
"Demo-Bloc" 3.21
3.c "Hydrocontrol" Regulating and isolating valves

Content 3.25
0
2
4
6
"Hydrocontrol VTR" Double regulating and 3.26

0
2
4
6
0
commissioning valves PN 25 / PN 16
"Hydrocontrol VPR" Double regulating and 3.28
GG25
PN1
6 "Hydrocontrol VFC" Double regulating 3.29
OV
0
0
2
4
6
and commissioning valves PN 16
2
4
6
"Hydrocontrol VFC" Double regulating and 3.30

0
"Hydrocontrol VFR" Double regulating and 3.30
"Hydrocontrol VFN" Double regulating and 3.31
"Hydrocontrol VGC" Double regulating and 3.31
"Hydrocontrol STR" Double regulating and commissioning valves PN 25 3.32
"Hydrocontrol MTR" Double regulating and commissioning valves PN 25 3.32
"Hydrocontrol MPR" Double regulating and commissioning valves PN 16 3.32
"Hydrocontrol MFC" Double regulating and commissioning valves PN 16 3.33
"Hydrocontrol ATR" Isolating and orifice valves PN 25 / PN 16 3.34
"Hydrocontrol APR" Isolating and orifice valves PN 16 3.34
"Hydrocontrol AFC" Isolating and orifice valves PN 16 3.34
2017 3.01
Page
3 3.d "Hydromat" Differential pressure and flow regulators

0
0
6
0
0
12
Content 3.35
00
8
"Hydromat QTR" Flow regulators PN 16 3.36

OV
"Hydromat DTR" Differential pressure regulators PN 16 3.37

"Hydrocontrol"/ "Hydromat" System examples 3.39
"Hydromat DFC" Differential pressure regulators PN 16 3.38
3.e Accessories for "Hydrocontrol", "Hydromat", "Hycocon"

Content 3.41
Connection sets 3.42
Stem extensions 3.43
Bonnets 3.43
Diaphragm actuators 3.43
Accessories 3.44
Tailpipe sets 3.45
Metering stations 3.46
3.f "Hycoflow" Double regulating and commissioning valves with flow display
Content 3.49
"Hycoflow VTB" 3.50
3.g "Cocon" Regulating valves

Content 3.51
"Cocon QTR" Pressure independent control valves PN 25 / PN 16 3.56
"Cocon QFC" Pressure independent control valves PN 16 3.56
"Cocon QGC" Pressure independent control valves PN 16 3.57
Accessories for "Cocon QTZ" PN 25 and "Cocon 2TZ" 3.58
Accessories for "Cocon QTZ" PN 16 and "Cocon QTR" 3.58
Accessories for "Cocon QTR" and "Cocon QFC" 3.59
Tailpipe sets 3.60
"Cocon 2TZ" Regulating valves PN 10 3.61
Measuring devices for "Cocon 2TZ" regulating valves 3.61
OV-Flex HC Flexible hoses 3.62
Accessories 3.62
3.02 2017
Page
3.h "Optibal W6" Six-way ball valve 3

Content 3.63
"Optibal W6" Six-way ball valve 3.64
Tailpipe sets 3.65
3.i "Flypass" Connection systems, valves and fittings

Content 3.67
"Flypass" System illustration 3.68
"Flypass" Connection sets 3.69
"Flypass 4TZ" Connection fitting 3.72
Valves for combination with the "Flypass 4TZ" 3.72
Accessories 3.74
3.j "Tri-M", "Tri-D", "Tri-CTR"

Content
OV
I II 3.77
III
"Tri-M plus TR" Four-port mixing valves PN 10 3.78

"Tri-D plus TB" Three-way diverting valve PN 16 3.78
"Tri-D TB" Three-way diverting valve PN 16 3.78
Accessories sets for three-way valves"Tri-D TR", "Tri-M TR" and "Tri-CTR" 3.80
Temperature controllers 3.81
"Combi LR" Radiator lockshield valves 3.81
Two-way valve PN 16 3.81
3.k "KTB" Thermostatic valves for cooling systems

Content 3.83
Thermostatic valves "KTB" 3.84
Thermostats for thermostatic valves "KTB" 3.84
3.l Room thermostats, actuators

Content 3.85
Room thermostats 3.86
"Sensor GA FD" Dew point control 3.88
"Aktor MH CON B" (ENOCEAN) 3.92
2017 3.03
Page
3 3.m "OV-DMC 3", OV-DMC 2" and "OV-DMCP" Measuring systems

Content 3.93
"OV-DMC 3" 3.94
"OV-DMC 2" Measuring system 3.95
"OV-DMC 2", "OV-DMPC" Accessories 3.95
"OV-DMPC" Measuring system 3.96
"OV-Connect" Differential pressure transmitter 3.97
"classic" measuring technique 3.98
Accessories "eco" measuring technique 3.98
3.n Products for air conditioning and ventilation

Content 3.99
Products for air conditioning and ventilation 3.100
3.o Products for radiant and chilled ceiling systems

Content 3.103
Products for radiant and chilled ceiling systems 3.104
3.p Connection system

Content 3.107
Summary of the product groups and connection systems with male thread 3.108
Summary of the product groups and connection systems with female thread 3.109
3.04 2017
and cooling systems 3.a System summary
Page
3.a System summary 3

Content
Functions, constructions etc. 3.06
Combinations of the components/Integration into systems 3.08
2017 3.05
Hydronic balancing in heating 3.a System summary
and cooling systems Functions, constructions etc.
Product group Hycocon Hydrocontrol
Hydrocontrol ATR/APR
Hydrocontrol VTR/VPR
Hydrocontrol MTR/MPR
3
Hycocon ATZ/APZ
Hydrocontrol MFC
Hycocon VTZ/VPZ
Hydrocontrol VGC
Hydrocontrol AFC
Hydrocontrol STR
Hydrocontrol VFC
Hydrocontrol VFN
Hydrocontrol VFR
Hycocon HTZ
Hycocon DTZ
Hycocon ETZ
PN16 PN6 PN16 PN16 PN16
Nominal pressure PN16 PN16 PN16 PN16 PN16 PN25 PN16
PN16 PN25 PN25
PN25 PN25
PN16 PN25
PN16
Main function

Double regulating and commissioning valve
Isolating and orifice valve
Regulating valve
Differential pressure regulator
Flow regulator
Mixing valve
Diverting valve
Pattern

Straight pattern
Angle pattern
Reversed angle pattern
Three-way valve
Connection

Female thread
Male thread
Female/male thread
Press connection
Compression connection
Flange
Groove
kvs-value DN 10 2.88 2.88
0.55 /
DN 15 1.7 1.7 0.9 1.7 1.7 3.88 1.15 / 3.88
2.1
2.7/ 1.04/
DN 20 2.7 2.7 0.9
5.0
2.7 5.71 4.77
2.6
3.7 5.71
DN 25 3.6 3.6 0.9 3.6 3.6 8.89 8.38 6.1 8.89

DN 32 6.8 6.8 6.8 6.8 19.45 17.08 12.5 19.45
DN 40 10 10 10 10 27.51 26.88 18.1 27.51
DN 50 18 18 23 38.78 36 36 30.5 38.78
DN 65 50 98 98 98 98 86.7 50 98
DN 80 122.2 122.2 122.2 122.2 102 122.2
DN 100 201 201 201 201 198 201
DN 125 293 293 293 293 271 293
DN 150 404.3 404.3 404.3 404.3 400 404.3
DN 200 814.5 814.5 814.5 814.5 750
DN 250 1200 1200 1200 1090
DN 300 1600 1600 1600 1600
DN 350 2250
DN 400 3750
Permissible
fluid temperature
-20 C
-10 C
0 C
100 C
120 C
150 C
200 C
Connection possibility
Actuator
Further Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page
information 3.12 3.13 3.14 3.14 3.15 3.26 3.29 3.30 3.31 3.31 3.32 3.32 3.33 3.34 3.34
3.06 2017
and cooling systems Functions, constructions etc.
Hyco- Tri-M, Tri-D, Tri-CTR, KTB,

Hydromat Cocon
flow two-way valves and temperature controllers
3
Hydromat QTR
Hydromat DTR
Hydromat DFC
Hycoflow VTB
Two-way valve
Tri-M plus TR
Tri-D plus TB
Cocon QGC
Cocon QTR
Cocon QFC
Cocon QTZ
Cocon QTZ
Cocon 2TZ
Tri-M TR
Tri-D TR
Tri-D TB
Tri-CTR
KTB
PN16 PN16
PN16 PN16 PN16 PN10 PN10 PN16 PN25
PN25 PN25
PN16 PN10 PN16 PN16 PN16 PN16 PN16 PN10 PN16 Nominal pressure
Main function

Double regulating and commissioning valve
Isolating and orifice valve
Regulating valve
Differential pressure regulator
Flow regulator
Mixing valve
Diverting valve
Pattern

Straight pattern
Angle pattern
Reversed angle pattern
Three-way valve
Connection

Female thread
Male thread
Female/male thread
Press connection
Compression connection
Flange
Groove
DN 10 kvs-value
0.45 / 0.45 / 0.6 / 0.45 / 1
2.5
1/1.8 1/1.8 1.8/2.2 1/1.8
2.5 2.5 1
1.6/2.5 DN 15
5 2.7 4.5 1.8/2.5 2.9 4.5 4.5 1 4/6.3 DN 20

7.5 5.5/8.3 4 4.0 6.5 6.5 1 10 DN 25
10 13.7 6 7.6 16 DN 32
15 11.5 11.5 9.5 9.5 25 DN 40
34 15/18.5 12 35 DN 50
52 36 36 63 DN 65
75 56 56 100 DN 80
110 80 80 160 DN 100
145 150 220 DN 125
170 220 320 DN 150
270 DN 200
DN 250
DN 300
DN 350
DN 400
Permissible
fluid temperature
-20 C
-10 C
0 C
100 C
120 C
150 C
200 C

Connection possibility

Actuator
Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Further
3.36 3.37 3.38 3.50 3.61 3.54 3.52 3.56 3.56 3.57 3.78 3.78 3.78 3.79 3.79 3.79 3.84 3.81 information
2017 3.07
and cooling systems Combinations of the components/Integration into systems
1 2 3 4
1. Oventrop valves and actuators: see table
Illustration
2. Oventrop valves with actuators of other manufacturers: (examples)
With due consideration of the valve parameters.
3
the combination with actuators of other
manufacturers is possible on consultation.
Ratings
h = valve valves Hycocon ETZ Hycocon HTZ Cocon 2TZ Cocon QTZ
x = lower stroke of the valve
Item no. 10683 10684.. 10685 10686.. 11450 11454.. 1145511462..
3. Oventrop actuators with valves of other manufacturers:
on consultation DN 15 -25 15 -25 / 32 / 40 15 / 20 10/15/20/25/32
4. Integration into the centralised building control system Connection M 30 x 1.5 M 30 x 1.5 M 30 x 1.5 M 30 x 1.5
(CBC): The four most important characteristic Closing dimension x [mm] 11.8 11.8 11.8 11.8
parameters are shown in the table.
p max. [bar] 1 5/3/2 1 4
NC
1 = closed with current off NO = open with current off Valve lift h [mm] 2.2 3/4 / 4 2.5 / 3.5 2.8 / 2.8 / 2.8 / 3.5 / 4 / 4
EM = electromotive ET = electrothermal PN 16 16 10 16
Operating
2 behaviour: additionally 420 mA / 210 V
Upper lift
Valve adapter Hycocon (item no. 1012992) required.
3 14.0 or higher 15.8 or higher 14.3 or higher 14.6/15.8 or higher
Demands on
position [mm]
actuators
kvs-value can be reduced
4 Lower lift
position [mm] 11.3 or lower 11.3 or lower 11.3 or lower 11.3 or lower
Piston stroke effective valve lift
5
Valve adapter 1012462 required.
6 Closing press. [N]
min/max. 90 / 150 90 / 150 90 / 150 90 / 150
Ratings Characteristic parameters for CBC Valve
Max. fluid temperature [C]
Permissible install. position
Operating power [mm]
actuators characteristic 1
Operating behaviour
1
Piston stroke [mm]
line 1 1
Operating current
Flow rate
Flow rate
Flow rate
Flow rate
1 2 3 22 2
Medium floating
2 2 2 2
3 3

3
Protection
Item no.
Interface
Illustration Actuator
Model
Effective piston stroke Effective piston stroke Effective piston stroke Effective piston stroke
(examples) characteristic line
24 V / 230 V
Piston stroke
10124..
2 point
~5 min
ET NC

digital

+100
IP54
> 90
11.2
15.8
A
-
Drive

Aktor T 2P L NC/Aktor T 2P H NC
24 V / 230 V
Piston stroke
10124..
2 point
~5 min

digital
ET NO

+100
IP54
> 90
11.2
15.8
any
B
-
Drive

Aktor T 2P L NO/Aktor T 2P H NO
steady (0-10V)
Piston stroke
~40 s/mm
analogue
1012953
ET NC

+100
IP54
24 V
> 90
11.2
15.8
4.0
Drive

Aktor T ST L NC
steady (0-10V)
1012705/35
Piston stroke
~15 s/mm
analogue
0.5-4.0

+100
IP40
24 V
> 90
11.2
15.8
EM
Aktor M ST L Drive (1012705)

steady (0-10V)
1012706/36
Piston stroke
~15 s/mm
analogue
0.5-4.0

+100
IP40
24 V
> 90
11.2
15.8
EM
Aktor M ST L Drive (1012706)

Piston stroke
~15 s/mm
1012708
3 point

digital
+100
IP40
24 V
> 90
11.2
15.8
EM
F
-
Aktor M 3P L Drive
In vertical to horizontal position, not suspended
Piston stroke
~15 s/mm
1012709
3 point

digital
230 V
+100
IP40
> 90
11.2
15.8
EM
G
-
Aktor M 3P H Drive
1012710/11
Piston stroke
230 V/24 V
EM NO
2 point

digital
+100
IP54
> 90
11.2
17.0
~3 s
H
-
Aktor M 2P H/Aktor M 2P L Drive

Piston stroke
~30 s/mm
EIB / KNX
2.6-4.0
11560..
steady

+100
IP44
24 V
> 90
11.2
15.2
EM
Aktor M ST EIB Drive

Piston stroke
~30 s/mm
nom. 48 V
1157065
2.6-4.0
steady

+100
LON
IP44
> 90
11.2
15.2
EM
Aktor M ST LON Drive

EnOcean (EEP A5-20-01) OV wireless (EnOcean)
Piston stroke
Mignon (2x)
~3 s/mm
1150665
steady

IP20
> 90
11.0
15.4
+90
EM
K
2
Aktor MH CON B Drive

steady (controller integrated)
Piston stroke
Mignon (2x)
~3 s/mm
1150765

IP20
> 90
11.0
15.4
+90
EM
L
2
Aktor MH CON B (ENOCEAN) Drive
All values are standard values without tolerances.
3.08 2017
5 6 7 8 9 10 11
Two-way straight
3
Cocon QTZ Tri-M plus TR Tri-D plus TB Tri-DTR/Tri-MTR Tri CTR pattern valve KTB
1143111494.. 11427.. 11426.. 11302 / 11307.. 11312.. 11307.. 11417 -11419..
10/15/20/25/32 15 15 20 / 25 / 40 15-50 20 / 25 / 40 15 / 20 / 25
M 30 x 1.5 M 30 x 1.5 M 30 x 1.5 M 30 x 1.5 M 30 x 1.5 M 30 x 1.5 M 30 x 1.5
11.8 11.8 11.8 11.8 11.8 11.8 12.8
6 1 1 0.75 / 0.5 / 0.2 0.75 / 0.5 / 0.2 0.5
30-210 l/h: 2.8/4 2.5 2.5 2.8 2.8 3 2.5
25 10 16 16 16 16 10
14.6/15.8 or higher 14.3 or higher 14.3 or higher 14.6 or higher 14.6 or higher 14.8 or higher 13.3 or higher
11.3 or lower 11.3 or lower 11.3 or lower 11.3 or lower 11.3 or lower 11.3 or lower 10.8 or lower
90 / 150 90 / 150 90 / 150 90 / 150 90 / 150 90 / 150 90 / 150
1 1 1 1 1 1
1 1 1 1 1 11 1 1 1 1 1 1 1 13 1 1
1 2 3 2 3 2 2 3 2 3 2
Flow rate
Flow rate
Flow rate
Flow rate
2 3 22 2 33 3 1 23 2 3 23 3 3 Flow rate 2
Flow rate
2 32 2 2
Flow rate
3 332 2 3
2
3 3 22 3 2 3 2 3
3
Effective piston stroke Effective piston stroke Effective piston stroke Effective piston stroke Effective piston stroke Effective piston stroke

(1012735)

(1012736)
2017 3.09
1 2 3 4 5 6
1. Oventrop valves and actuators: see table
Illustration
2. Oventrop valves with actuators of other manufacturers: (examples)
With due consideration of the valve parameters.
the combination with actuators of other
3 manufacturers is possible on consultation.
h = valve
Ratings Cocon QFC
valves Cocon QTR Cocon QFC Cocon QFC High fow Cocon QGC Two-way valve
x = lower stroke of the valve
Item no. 11461../11431 11461/6649-50 1146151-56/1146651-56 1143154-55 1676251-53 11308../16708..
3. Oventrop actuators with valves of other manufacturers:
on consultation DN 40-50/50 40-50 65.80.100/125/150/200 125/150. 200 65. 80. 100 15-150
4. Integration into the centralised building control system Connection Squeeze connection Squeeze connection Squeeze connection Squeeze connection Squeeze connection Squeeze connection
(CBC): The four most important characteristic Closing dimension x [mm]
parameters are shown in the table.
p max. [bar] 4 4 4 4 4 0.7-12.1
NC
1 = closed with current off NO = open with current off Valve lift h [mm] 10 10 20 / 36 / 40 36 / 40 20 10 / 30 / 40
EM = electromotive ET = electrothermal
PN 16/25 16/25 16/25 16 16 16
Operating behaviour: additionally 420 mA / 210 V
2
Upper lift
Valve adapter Hycocon (item no. 1012992) required.
3
Demands on
position [mm]
actuators
kvs-value can be reduced
4 Lower lift
Piston stroke effective valve lift
5 position [mm]
Valve adapter 1012462 required.
6 Closing press. [N]
min/max. 500/800/1000 500/800/1000 800/1000/2000 2000 800/1000 500/2000
Ratings Characteristic parameters for CBC Valve
Max. fluid temperature [C]
Permissible install. position
Operating power [mm]
actuators characteristic
Operating behaviour
1 1 1 1 1 1 1 1 1 1
Piston stroke [mm]
line 1 1 1 1 1
Operating current
Flow rate
Flow rate
Flow rate
Flow rate
Flow rate
Medium floating
2 3 2 32 3 23 2 32 3 23 2
Flow rate
2 2 2 3 2 2 3 2 2 2

3 3 3 3 3
Protection
Item no.
Interface
Illustration Actuator
Model
Effective piston stroke Effective piston stroke Effective piston stroke Effective piston stroke Effective piston stroke Effective piston stroke
(examples) characteristic line
7.5 s/mm
1158010
Adjustable

+120
IP54
72.5
82.5
500
EM
A
10
at the actuator
Aktor M ST L
7.5 s/mm
1158011
Adjustable

+120
IP54
72.5
82.5
500
B
EM
10
at the actuator 1
1
2 2 3
Aktor M ST L 3 DN 15-50
EM2
1158030
2 s/mm

112.5
Adjustable
+120
2500
IP66
72.5
C
40
at the actuator 1
In vertical to horizontal position, not suspended
1
2 2 3
Aktor M ST L DN 125-200 DN 125-150 3 DN 65-150
EM with spring return 2 EM with spring return 2
steady (0-10 V)/2 point/3 point

1158031
analogue / digital / digital
2 s/mm

112.5
Adjustable
+120
2000
IP66
72.5
D
40
at the actuator 1
1
2 2 3
Aktor M ST L DN 125-200 DN 125-150 3 DN 65-150
24 V
1158032
2 s/mm

112.5
Adjustable
+120
2000
IP66
72.5
E
40
at the actuator
Aktor M ST L DN 125-200 DN 125-150 DN 65-150

Piston stroke
1158022
2 s/mm
EM with spring return 2

+120
1000
IP54
F
20
Aktor M ST L Drive DN 65-100

Piston stroke
1158021
2 s/mm

+120
1000
IP54
G
20

Piston stroke
1158020
9 s/mm

+120
IP54
800
EM
H
20
All values are standard values without tolerances
3.10 2017
and cooling systems 3.b "Hycocon" Control, regulating and isolating valves
Page
3.b "Hycocon" Control, regulating and isolating valves 3

Content
"Hycocon VTZ" Double regulating and 3.12
"Hycocon VPZ" Double regulating and 3.12
"Hycocon ATZ" Isolating and orifice valves PN 16 3.13
"Hycocon APZ" Isolating and orifice valves PN 16 3.13
"Hycocon ETZ" Regulating valves PN 16 3.14
"Hycocon HTZ" Regulating valves PN 16 3.14
"Hycocon DTZ" Differential pressure regulators PN 16 3.15
Accessories 3.17
Valve inserts suitable for "Hycocon" valves 3.19
Measuring and draining unit 3.20
"Hycocon" Combination summary connection thread M 30 x 1.5 3.22
"Hycocon" System illustration of examples / Conversion possibilities 3.23
"Demo-Bloc" 3.21
2017 3.11
"Hycocon VTZ" Double regulating and
Hydronic balancing in heating "Hycocon VPZ" Double regulating and
and cooling systems commissioning valves PN 16
Packing
unit
"Hycocon VTZ" Double regulating and Application:

3 commissioning valves PN 16
(presettable, threaded connection, dezincification resistant brass)
with infinitely adjustable presetting aggressive, harmless fluids (e.g. water or
"eco" measuring technique suitable water and glycol mixtures according to
VDI 2035/NORM 5195).
both ports with integrated pressure test points and drain valves Measuring method:
as well as insulation shells Determination of the flow rate by measuring the
differential pressure and taking the presetting
both ports female thread according to EN 10226 values into consideration.
Measuring gauges: page 3.94 to 3.96
DN 15 1.70 (10) 1061704 Connection thread M 30 x 1.5.
DN 20 2.70 (10) 1061706 All functioning components are located in one
DN 25 3.60 (10) 1061708 plane which is especially advantageous where
DN 32 6.80 (5) 1061710 space is limited. Different possibilities of
DN 40 10.00 (5) 1061712 conversion of "Hycocon" valves see summary:
DN 50 18.00 (5) 1061716 page 3.22.
Function: "Hycocon" double regulating and
commissioning valves serve to achieve a
both ports male thread with collar nut hydronic balance between the various risers or
different sections of the system. Installation is
DN 15 1.70 (10) 1061804 possible in either the supply or the return pipe.
DN 20 2.70 (10) 1061806 Description "Hycocon VTZ/VPZ":
DN 32 6.80 (5) 1061810 Operating temperature ts:-10 C up to +120 C
DN 40 10.00 (5) 1061812 Body and bonnet made of brass resistant to
DN 50 18.00 (5) 1061816 dezincification.
Oventrop double regulating and commissioning
"Hycocon VPZ" Double regulating and valves with reproducible, infinitely adjustable
commissioning valves PN 16 presetting controllable at any time. Lockable
(presettable, press connection, dezincification resistant brass) and lead sealable presetting (accessories set).
with infinitely adjustable presetting Under working conditions and without draining
"eco" measuring technique the system (only DN 15 - DN 40):
- conversion to differential pressure regulator
both ports with integrated pressure test points and drain valves "Hycocon DTZ" (diaphragm actuator for
as well as insulation shells the conversion: page 3.17)
- conversion to thermostatic operation
(thermostats "Uni XH/LH": e.g. page 1.08,
both ports press connection
temperature controllers: page 3.81)
- can be used with electromotive and electro-
DN 15 15 mm 1.70 (10) 1061751
thermal actuators as well as electromotive
DN 15 18 mm 1.70 (10) 1061752
actuators "EIB" or "LON" (actuators:
DN 20 22 mm 2.70 (10) 1061754
page 1.26)
DN 25 28 mm 3.60 (10) 1061756
- bonnet may be replaced with the help of the
DN 32 35 mm 6.80 (5) 1061758
"Demo-Bloc" for subsequent conversion of
DN 40 42 mm 10.00 (5) 1061760
sizes DN 15 - DN 25
The "Hycocon" valves are supplied with
insulation shells (max. temperature 110 C/not
diffusion tight).
The valves DN 15 and DN 20 (female thread)
are suitable for use with compression fittings,
item no. 10271.., page 3.45.
Press connection:
For the direct connection of copper pipes
according to DIN EN 1057/DVGW GW 392,
stainless steel pipes according to DIN EN
10088/DVGW GW 541 and thin-walled C-steel
pipe (material no. E195/1.0034) according to
with the original contours SANHA (SA),
carried out according to the installation
instructions.
Awards "Hycocon":
ISH Frankfurt Design plus
Design Award Switzerland
International Design Forum Hanover
Award iF
Nominated for the Design Award of the
Tailpipe sets: Pages 1.54, 1.95, 3.45 Federal Republic of Germany
3.12 2017
Hydronic balancing in heating "Hycocon ATZ" Isolating and orifice valves PN 16
and cooling systems "Hycocon APZ" Isolating and orifice valves PN 16
Packing
unit
"Hycocon ATZ" Isolating and orifice valves PN 16 Application:

(with isolating facility, threaded connection,
dezincification resistant brass)
3
"eco" measuring technique aggressive, harmless fluids (e.g. water or
suitable water and glycol mixtures according to
both ports with integrated pressure test points and drain valves VDI 2035/NORM 5195).
as well as insulation shells
Connection thread M 30 x 1.5.
both ports female thread according to EN 10226
All functioning components are located in one
DN 15 1.70 (10) 1067304 plane which is especially advantageous where
DN 20 2.70 (10) 1067306 space is limited.
DN 25 3.60 (10) 1067308
DN 32 6.80 (5) 1067310 Description "Hycocon ATZ/APZ":
DN 50 18.00 (5) 1067316 Operating temperature ts: -10 C up to +120 C
Body and bonnet made of brass resistant to
dezincification.
both ports male thread with collar nut
Under working conditions and without draining
DN 15 1.70 (10) 1067404 the system:
DN 20 2.70 (10) 1067406 conversion to double regulating and
DN 25 3.60 (10) 1067408 commissioning valve (handwheel for
DN 32 6.80 (5) 1067410 conversion: page 3.17)
DN 40 10.00 (5) 1067412
DN 50 18.00 (5) 1067416 The "Hycocon" valves are supplied with
insulation shells (max. temperature 110 C/not
"Hycocon APZ" Isolating and orifice valves PN 16 diffusion tight).
(with isolating facility, press connection,
dezincification resistant brass) The valves DN 15 - DN 20 (female thread)
"eco" measuring technique are suitable for use with compression fittings,
item no. 10271.., page 3.45.
both ports with integrated pressure test points and drain valves
as well as insulation shells For further information see
DN 15 15 mm 1.70 (10) 1067351

DN 15 18 mm 1.70 (10) 1067352
DN 20 22 mm 2.70 (10) 1067354
DN 25 28 mm 3.60 (10) 1067356
DN 32 35 mm 6.80 (5) 1067358
DN 40 42 mm 10.00 (5) 1067360
Tailpipe sets: Pages 1.54, 1.95, 3.45
2017 3.13
Hydronic balancing in heating "Hycocon ETZ" Regulating valves PN 16
and cooling systems "Hycocon HTZ" Regulating valves PN 16
kv kv
Packing
unit
P-dev. P-dev.
"Hycocon ETZ" Regulating valves PN 16 Application:

3 (can be motorised, threaded connection,
Central heating and cooling systems
with closed circuits, for operation with non-
with infinitely adjustable presetting (AV 9 technique) aggressive, harmless fluids (e. g. water or
"eco" measuring technique suitable water and glycol mixtures according to
VDI 2035/NORM 5195).
both ports with integrated pressure test points and drain valves
Measuring method:
both ports female thread according to EN 10226 Determination of the flow rate by measuring the
differential pressure and taking the presetting
DN 15 0.36 0.67 1.00 (10) 1068364 values into consideration.
DN 20 0.36 0.67 1.20 (10) 1068366 Measuring gauges: page 3.94to 3.96
DN 25 0.36 0.67 1.20 (10) 1068368 Connection thread M 30 x 1.5.
All functioning components are located in one
plane which is especially advantageous where
both ports male thread with collar nut space is limited.
Different possibilities of conversion of
DN 15 0.36 0.67 1.00 (10) 1068464 "Hycocon" valves see summary: page 3.22.
DN 20 0.36 0.67 1.20 (10) 1068466 Function:
DN 25 0.36 0.67 1.20 (10) 1068468 "Hycocon" regulating valves allow the
regulation of sections of the system or an
"Hycocon HTZ" Regulating valves PN 16 individual room temperature control when
(high kv-value, threaded connection, combined with actuators or thermostats.
dezincification resistant brass) Installation is possible in either the supply or
with infinitely adjustable presetting the return pipe.
Description "Hycocon ETZ":
both ports with integrated pressure test points and drain valves Max. operating pressure ps: 16 bar (PN 16)
Operating temperature ts: -10 C up to +120 C
Body and bonnet made of brass resistant
to dezincification.
With infinitely presettable valve insert "AV 9".
DN 15 0.52 0.95 1.70 (10) 1068564
DN 20 0.52 1.04 2.70 (10) 1068566
the system:
DN 25 0.52 1.08 3.60 (10) 1068568
conversion to thermostatic operation
DN 32 0.70 1.39 6.80 (5) 1068570
(thermostats "Uni XH/LH": e. g. page 1.08,
DN 40 0.84 1.58 10.00 (5) 1068572
can be used with electromotive and
both ports male thread with collar nut electrothermal actuators as well as
electrothermal actuators "EIB"or "LON"
DN 15 0.52 0.95 1.70 (10) 1068664
(actuators: page 3.89)
DN 20 0.52 1.04 2.70 (10) 1068666
bonnet may be replaced with the help of
DN 20 0.63 1.30 5.00 (10) 1068667
the "Demo-Bloc" for subsequent conversion
DN 25 0.52 1.08 3.60 (10) 1068668
With white protection cap with 3 frontal lugs.
DN 32 0.70 1.39 6.80 (5) 1068670
Presetting key: page 1.110
DN 40 0.84 1.58 10.00 (5) 1068672
Description "Hycocon HTZ":
dezincification.
With infinitely presettable valve insert for high
flow rates.
the system:
conversion to differential pressure regulator
"Hycocon DTZ" (diaphragm actuator for the
conversion: page 3.17)
conversion to thermostatic operation
(thermostats "Uni XH/LH": e. g. page 1.08,
can be used with electromotive and
electrothermal actuators as well as
electrothermal actuators "EIB" or "LON"
(actuators: page 3.90)
conversion to double regulating and
commissioning valve "Hycocon VTZ"
With green protection cap.
Set for presetting: page 3.18

3.14 2017
Hydronic balancing in heating 3.b "Hycocon" Control, regulating and isolating valves
and cooling systems "Hycocon DTZ" Differential pressure regulators PN 16
Packing
unit
"Hycocon DTZ" Differential pressure regulators PN 16 Application:

(differential pressure control, threaded connection,
3
"eco" measuring technique aggressive, harmless fluids (e. g. water or
both ports with integrated pressure test points and drain valves VDI 2035/NORM 5195).
as well as insulation shells
Connection thread M 30 x 1.5.
Nominal value: 50 to 300 mbar, infinitely adjustable All functioning components are located in one
plane which is especially advantageous where
DN 15 1.70 (10) 1062004 space is limited.
DN 20 2.70 (10) 1062006
DN 25 3.60 (10) 1062008 Different possibilities of conversion of
DN 32 6.80 (5) 1062010 "Hycocon" valves see summary: page 3.22.
DN 40 10.00 (5) 1062012
DN 50 23.00 1062016 Description:
"Hycocon DTZ" differential pressure regulators
can be used for a local or central regulation of
both ports female thread according to EN 10226 the differential pressure. They are proportional
Nominal value: 250 to 600 mbar, infinitely adjustable regulators working without auxiliary energy
and are equipped with a pressure balanced
DN 15 1.70 (10) 1062204 valve disc.
DN 20 2.70 (10) 1062206 The "Hycocon DTZ" differential pressure
DN 25 3.60 (10) 1062208 regulators are installed in the return pipe.
DN 32 6.80 (5) 1062210
DN 50 23.00 1062216 Operating temperature ts: -10 C up to +120 C
both ports male thread with collar nut dezincification.
Nominal value: 50 to 300 mbar, infinitely adjustable
The "Hycocon DTZ" differential pressure
DN 15 1.70 (10) 1062104 regulators are supplied complete with the
DN 20 2.70 (10) 1062106 connection set and the drain valve as well as
DN 25 3.60 (10) 1062108 insulation shells (max. temperature 110 C / not
DN 32 6.80 (5) 1062110 diffusion tight).
DN 40 10.00 (5) 1062112
DN 50 23.00 1062116 Capillary length 1 m.
For further information see "Technical

information":
DN 15 1.70 (10) 1062304

DN 20 2.70 (10) 1062306
DN 25 3.60 (10) 1062308
DN 32 6.80 (5) 1062310
DN 40 10.00 (5) 1062312
DN 50 23.00 1062316
2017 3.15
and cooling systems Insulation shells
Insulation shells Insulation, consisting of two shells. Comply

3 for higher temperatures with the specifications of the German Energy
Saving Directive (EnEV), appendix 5, table 1,
DN 15 1061771 line 5.
DN 20 1061772 Not suitable for item no. 1068667 and
DN 25 1061773 "Hycocon DTZ".
DN 32 1061774 Building material class B2 according to
DN 40 1061775 DIN 4102.
Max. operating temperature ts: +120 C
additionally required for cooling systems Not suitable for item no. 1068667 and
"Hycocon DTZ".
DN 15 1061781 For "Hycocon ETZ/HTZ" only suitable in
DN 20 1061782 combination with item no. 1061771-75.
DN 25 1061783 Building material class B1 according to
DN 32 1061784 DIN 4102.
DN 40 1061785 Operating temperature ts: -10 C up to +120 C
Cold insulation: Min. fluid temperature: +6 C
The insulation shells have to be bonded
hermetically (restricted diffusion tightness at
low fluid temperature and at high ambient
temperature and/or humidity).
3.16 2017
and cooling systems Accessories
Packing
unit
Accessories For the conversion of isolating and orifice

valves "Hycocon ATZ/APZ" to double
regulating and commissioning valves
3
Handwheel for double regulating
commissioning valves Hycocon VTZ/VPZ "Hycocon VTZ/VPZ".
DN 15 (10) 1061793
DN 20 (10) 1061794
DN 25 (10) 1061795
DN 32 (10) 1061796
DN 40 (10) 1061797
Locking pin with locking wire For locking the set nominal values.
For double regulating and commissioning
for double regulating and (50) 1061792 valves "Hycocon VTZ/VPZ" as well as item no.
commissioning valves 42055/56/65/66..
"Hycocon VTZ/VPZ"
as well as for "Aquastrom T plus"
for differential pressure regulator (25) 1062092
"Hycocon DTZ"
eco measuring technique:

Fill and drain tool 1061791 For draining, venting and filling the
for valves with "eco" measuring technique installation.
Measuring adapter with quick-coupling

Measuring adapter (50) 1060297 technic to be screwed onto the fill and
drain tool.
For measurement with measuring

Set = 2 measuring needles for (25) 1061799 systems "OV-DMC 3", "OV-DMC 2"
valves with "eco" measuring technique and "OV-DMPC".
Diaphragm actuators Used for the conversion of "Hycocon VTZ/VPZ"

Nominal value: 50 to 300 mbar, infinitely adjustable or "Hycocon HTZ" valves to differential
pressure regulators "Hycocon DTZ".
DN 15 - DN 25 (10) 1062082
DN 32 / DN 40 (10) 1062085 The valve insert required for the conversion of
"Hycocon VTZ/VPZ" DN 15 - DN 25 is supplied
with the diaphragm actuators.
DN 15 - DN 25 (10) 1062282
DN 32 / DN 40 (10) 1062285
Adapter for the connection of the

Adapter G male thread (50) 1609302 Hycocon DTZ capillary to the
classic measuring technique
connection G female thread.
Adapter for the connection of the

Adapter G female thread (50) 1062090 Hycocon DTZ capillary to a G
male thread (flat sealing).
The capillary can also be used for

Capillary 2 m long (10) 1062095 "Hydromat DTR" manufactured
for "Hycocon DTZ" since 2012.
and "Hydromat DTR"
Capillary 5 m long (10) 1062097
for "Hycocon DTZ"
and "Hydromat DTR"
2017 3.17
Packing
unit
Set for presetting for series (10) 1068585

3 "Hycocon HTZ"

for thermostatic valves "AV 9, ADV 9, RFV 9, CV 9, E" insert.
and fittings "Multiblock T/TU/TFU/T-RTL" The presetting key fits only in one position.

3.18 2017
and cooling systems Valve inserts suitable for "Hycocon" valves
kv
Packing
unit
P-dev.
Valve inserts suitable for "Hycocon" valves All valve inserts DN 15 - DN 25 (except for item
sizes DN 15 - DN 25
(except for 1068667)
no. 1026981 and 1187071) are replaceable by
using the special tool "Demo-Bloc" without
3

0.67 (100) 1187047#

0.65 (100) 1187057#
"A" (DN 10 - DN 15) and "RF" # These valve inserts are suitable for all valve
0.95 (100) 1187069# sizes of the thermostatic valves "A, AV 9, AQ,
"A" (DN 20 - DN 32) and "AZ"
1.10 (100) 1187060#
"AF"
0.32 (100) 1187352# Distinctive features of the valves:
Gland nut
Protection
Series (since end of
cap
1993)
A black unplated brass

(3 frontal lugs)
AF red red
AQ/ EQ/ RFQ light grey
AV 9/ CV 9/ E white
(3 frontal lugs)
AZ H orange
AZ V green
RF blue unplated brass
RFV 9 light green

(3 frontal lugs)
for thermostatic valves "AQ, RFQ, EQ",

fittings "Multiblock TQ, TQ-RTL",
and "Unibox TQ, Q plus"
"QA" (25) 1187065#
"ADV 6" The double function of the "ADV 6" and

"ADV 9" inserts provokes an automatic
0.65 (100) 1186001# closing of the valve to 5 % of the nominal
flow (frost protection) should the
Presetting as "AV 6" and "AV 9".

and cooling systems Measuring and draining unit
kv
Packing
unit
P-dev.
"PTB" and "Cocon 2TZ" #These valve inserts are suitable for all valve
3 kvs = 0.45 P1 (100) 1186052#
sizes of the thermostatic valves "A, AV 6, ADV
kvs = 1.0 P2 (100) 1186053# 6, AZ, E, F, RF and RFV 6".
kvs = 1.8 P3 (100) 1186054
with stainless steel seat
(especially for steam installations) (100) 1186200#
"Combi LR" with cap (100) 1187071
Special valve insert for reversed supply and return pipe

for thermostatic valves "A, AV 9, AV 6, ADV 6, ADV 9,
CV 9, E, AF, RF, RFV 9, RFV 6"
without presetting
0.45 (100) 1187070#
Thermostatic valves "KTB" (100) 1147169

Valve inserts
for "Hycocon HTZ/DTZ"
DN 15 - DN 25 0.95 - 1.08 (10) 1067085
for "Hycocon HTZ", "Hycocon DTZ", "Hycocon VTZ/VPZ" The valve insert 1067066 is also suitable
for item no. 1068867 (Hycocon HTZ,
DN 32 1.39 (10) 1067066 DN 20 with kvs value 5.0).
DN 40 1.58 (10) 1067067
for "Hycocon VTZ/VPZ" and "Hycocon ATZ/APZ"
DN 15 - DN 25 (10) 1067065
for "Hycocon ATZ/APZ"
DN 32 (10) 1067068
DN 40 (10) 1067069
Measuring and draining unit "eco" measuring technique:

for valves with "eco" measuring technique Information: page 3.98
DN 15 - DN 40 (10) 1061790
Plug for valves with eco measuring technique
DN 15 - DN 40 (10) 1061798
3.20 2017
and cooling systems "Demo-Bloc"
Packing
unit

special tool for replacing the valve inserts,
suitable for "Hycocon" DN 15, 20 and 25
3
(except for "Hycocon DTZ" and item no. 1068667)
without draining the system
Basic tool also suitable for all
Oventrop thermostatic radiator valves
Cleaning head for all valves (100) 1188400 The valve seat can be cleaned by use of the
"Demo-Bloc" and the cleaning head.

2017 3.21
and cooling systems "Hycocon" Combination summary connection thread M 30 x 1.5
Body Inserts Control unit Valves (examples) Accessories
3 Handwheel
for isolation
Hycocon ATZ
DN 15DN 25 DN15DN 25
Valve insert item no. 1067065 DN 32DN 40
for Hycocon VTZ/VPZ/ATZ/APZ,
DN 15DN 25
Valve insert item no. 1067068
for Hycocon ATZ/APZ, DN 32
Valve insert item no. 1067069 Handwheel
for Hycocon ATZ/APZ, DN 40 for control
Valve insert item no. 1067066 DN 15DN 25 Hycocon VTZ
for Hycocon VTZ/VPZ/HTZ/DTZ, Item no. 106179395 DN15DN 40
DN 32
DN 32DN 40
for Hycocon VTZ/VPZ/HTZ/DTZ, Item no. 10619697
DN 40
Diaphragm actuator
DN 15DN 25
Item no. 1062082/
1062282
(including valve insert)
Hycocon
Item no. 1067085)
for Hycocon HTZ, DN15-DN 25 DTZ
Valve insert item no. 1067066 DN 32DN 40 DN15DN 40
for Hycocon VTZ/VPZ/HTZ/DTZ, Item no. 1062085/
DN 32 1062285
for Hycocon VTZ/VPZ/HTZ/DTZ,
DN 40
Thermostats and actuators
DN 15DN 40
other valve inserts
e. g. item no. 1011365
DN 15DN 25
Measuring
Electromotive and
A AZ Electrothermal
Item no. Item no. actuators draining
actuators
1187069 1187060 230 V / two point Hycocon unit
Item no. 1012710 ETZ/HTZ Item no.
DN 15DN 40 24 V / 010 V thermostatic 1061790
Item no. 1012705
Two point
operation
P1 kvs 0.45 P2 kvs 1.0 24 V / three point
Item no. 10124../ Item no. 1012708 DN15DN 40
Item no. Item no. 10129..
1186052 1186053 230 V / three point
24 V / 010 V Item no. 1012709
Item no. 1012952
Reversed Manual Electromotive

supply/
AF
heads actuators
Plug
Item no. Item no.
return System EIB
1187352
Item no. Item no. 1156065 1061798
1187070 Item no. 1156066
System LON
Item no. 1157065
KTB ADV 9
Item no. Item no. Hycocon
1147169 1186002 ETZ/HTZ
with actuator
DN15DN 40
Hycocon
ETZ and Steam
AV 9 insert
Item no. Item no.
1187047 1186200
3 4
2
5
1
Valve insert
QA
Item no.
1187065 Further thermostats: page 1.08 and onwards
Further actuators: page 1.26 and onwards
Hycocon
ETZ/HTZ
Valve insert for
with tempera-
return temperature Uni RTLH
ture controller
limitation DN 15DN 25 DN15DN 40
DN 15DN 25 Item no. 1027165
Item no. 1026981
Combi LR Spanner
DN 15DN 25 Control unit inside the insert
Item no. 1187071
The combination summary is not valid for item no. 1068667 (DN 20 Hycocon HTZ with kvs value 5.0)
3.22 2017
and cooling systems "Hycocon" System illustration of examples / Conversion possibilities
Further examples can be found in the product range Flow, pressure and temperature balancing.
Note: The connection thread of all Hycocon valves sized DN 15 to DN 40 is M 30 x 1.5.
Hydronic balancing 3
Standard installation:
The valves Hycocon VTZ/VPZ and Hycocon ATZ/APZ allow a subsequent
conversion as illustrated below.
Double
Hycocon ATZ
regulating and
commissioning
valve
Hycocon VTZ
Differential pressure regulation:
for instance consisting of the differential pressure regulators Hycocon DTZ and the
isolating and orifice valve Hycocon ATZ for installations with presettable
thermostatic valves.
Hycocon ATZ Differential A subsequent conversion of the Hycocon VTZ (DN 15 DN 40) with diaphragm
pressure
regulator actuator to differential pressure regulator Hycocon DTZ is possible.
Hycocon DTZ
Differential pressure regulation with flow limitation:
for instance consisting of the differential pressure regulator Hycocon DTZ and the
Differential double regulating and commissioning valve Hycocon VTZ for installations without
pressure
Hycocon VTZ regulator presettable thermostatic valves or radiator lockshield valves in which the flow rate
= Hycocon DTZ shall additionally be limited to the calculated value (capillary connection at the inlet
Hycocon ATZ = nipple of the Hycocon VTZ).
+ Hycocon VTZ
Handwheel + A subsequent conversion of the Hycocon VTZ (DN 15 DN 40) with diaphragm
Diaphragm
actuator and use of the dismounted handwheel of the Hycocon ATZ is possible.
actuator
Flow regulation (DN 15 DN 40):
for instance consisting of the differential pressure regulator Hycocon DTZ and the
Differential double regulating and commissioning valve Hycocon VTZ for installations without
pressure
Hycocon VTZ regulator
presettable thermostatic valves and radiator lockshield valves or for one pipe
= Hycocon DTZ systems (capillary connection at the inlet and outlet nipple of the Hycocon VTZ).
Hycocon ATZ = A subsequent conversion of the Hycocon VTZ with diaphragm actuator and use of
+ Hycocon VTZ
Handwheel + the dismounted handwheel of the Hycocon ATZ is possible.
Diaphragm
actuator
Flow regulation (DN 15 DN 40):
for instance consisting of the regulating valve Hycocon HTZ and the differential
Differential pressure regulator Hycocon DTZ for electronically controlled installations (capillary
pressure connection at inlet and outlet nipple of the Hycocon HTZ).
Hycocon HTZ regulator
+ Hycocon A subsequent conversion of the Hycocon VTZ with diaphragm actuator is
Electric = required.
actuator Hycocon VTZ
+
Diaphragm
actuator
2017 3.23
and cooling systems 3.c "Hydrocontrol" Regulating and isolating valves
Page
3.c "Hydrocontrol" Regulating and isolating valves 3

Content
0
2
4
6
"Hydrocontrol VTR" Double regulating and 3.26

0
2
4
6
0
commissioning valves PN 25 / PN 16
"Hydrocontrol VPR" Double regulating and 3.28
"Hydrocontrol VFC" Double regulating 3.29
GG25
6
PN1
OV
0
2
4
0 6
2
4
6
"Hydrocontrol VFC" Double regulating and 3.30

0
"Hydrocontrol VFR" Double regulating and 3.30
"Hydrocontrol VFN" Double regulating and 3.31
"Hydrocontrol VGC" Double regulating and 3.31
"Hydrocontrol MTR" Double regulating and commissioning valves PN 25 3.32
"Hydrocontrol MPR" Double regulating and commissioning valves PN 16 3.32
"Hydrocontrol MFC" Double regulating and commissioning valves PN 16 3.33
"Hydrocontrol ATR" Isolating and orifice valves PN 25 / PN 16 3.34
"Hydrocontrol APR" Isolating and orifice valves PN 16 3.34
"Hydrocontrol AFC" Isolating and orifice valves PN 16 3.34
2017 3.25
Hydronic balancing in heating "Hydrocontrol VTR" Double regulating and
and cooling systems commissioning valves PN 25 / PN 16
Packing
unit
0
2
4
"Hydrocontrol VTR" Double regulating and

6
0
2
4 Application:
3
6
0
commissioning valves PN 25 / PN 16 Central heating and cooling systems with

(presettable, threaded connection, bronze) closed circuits, for operation with non-
"classic" measuring technique aggressive, harmless fluids, (e. g. water or
PN 25 with mounted accessories set no. 3 = 1 pressure test point G VDI 2035/NORM 5195).
and 1 fill and drain ball valve G
both ports female thread according to EN 10226 Measuring method:
0
2
4
6
Determination of the flow rate by measuring the
DN 10 2.88 (10) 1060303 differential pressure and taking the presetting
0
2
4
6
0
DN 15 3.88 (10) 1060304 values into consideration.

DN 20 5.71 (10) 1060306 Measuring gauges: page 3.96 to 3.94
DN 25 8.89 (10) 1060308 Function:
0
DN 32 19.45 (5) 1060310 Oventrop double regulating and commissioning

DN 40 27.51 (5) 1060312 valves are installed in the pipework of central
DN 50 38.78 (5) 1060316 heating and cooling systems and serve to
achieve the hydronic balance between the
various circuits of the system. The double
PN 25 with mounted accessories set no.2=2 pressure test points G regulating and commissioning valves may be
both ports female thread according to EN 10226 installed in either the supply or the return pipe.
The valves DN 10 - DN 20 are suitable for use
0
2
DN 10 2.88 (10) 1060203 with compression fittings, item no. 10271..,
page 3.45.
4
DN 15 3.88 (10) 1060204

6
0
2
4
Body and bonnet made of bronze, stem and

6
DN 20 5.71 (10) 1060206

0
DN 25 8.89 (10) 1060208 disc made of brass resistant to

DN 32 19.45 (5) 1060210 dezincification (DZR), disc with PTFE seal, fill
DN 40 27.51 (5) 1060212 and drain ball valve, blind plug and pressure
DN 50 38.78 (5) 1060216 test point made of brass resistant to
dezincification (DZR). Colour rings to mark the
PN 25 both ports with connection for "classic" measuring technique supply (red) and return pipe (blue) are supplied
(closed with blind plugs) with each valve (except for item no. 1060120).
0
Description "Hydrocontrol VTR":
Max. operating pressure ps: 25 bar (PN 25),
2
4
DN 10 2.88 (10) 1060103

6
0
362,5 psi
2
4
DN 15 3.88 (10) 1060104

6
0
DN 20 5.71 (10) 1060106 or 16 bar (PN 16), 232 psi for DN 65

DN 32 19.45 (5) 1060110
DN 40 27.51 (5) 1060112 10601:
DN 50 38.78 (5) 1060116 The sizes DN 40 and DN 50 are ACS (France)
certified for installation in potable water
systems.
PN 16
Male thread:
DN 65 50.00 1060120 DN 10 - G
DN 15 - G
DN 20 - G 1
PN 16 both ports with connection for "classic" measuring technique DN 25 - G 1
(closed with blind plugs) DN 32 - G 1
both ports male thread with collar nut DN 40 - G 1
0
DN 50 - G 2
2
4
6
DN 10 2.88 (10) 1060503

0
2
4
6
0
DN 15 3.88 (10) 1060504

Awards:
DN 20 5.71 (10) 1060506
DN 25 8.89 (10) 1060508 International Design Award
Baden-Wrttemberg
DN 32 19.45 (5) 1060510
DN 40 27.51 (5) 1060512 Good Design Award Japan
DN 50 38.78 (5) 1060516 Industrial Design Forum Hanover
Award iF

information":
Accessories: Page 3.42

Bonnets: Page 3.43
Insulation shells: Page 3.44
3.26 2017
Hydronic balancing in heating "Hydrocontrol VTR" Double regulating and
and cooling systems commissioning valves PN 25 / PN 16
Packing
unit
PN 25 with mounted accessories set no.2=2 pressure test points G 16887..:

both ports female thread according to EN 10226 Type approval for shipbuilding (DNV-GL). 3
0
2
4
DN 10 2.88 (10) 1688703
DN 15 3.88 (10) 1688704
6
0
2
4
6
DN 20 5.71 (10) 1688706

0
DN 25 8.89 (10) 1688708

DN 32 19.45 (5) 1688710
DN 40 27.51 (5) 1688712
DN 50 38.78 (5) 1688716
2017 3.27
0
2

4
6

0
2
4
6
"Hydrocontrol VPR" Double regulating and

0
Packing
unit
"Hydrocontrol VPR" Double regulating and Application:

(presettable, press connection, bronze)
"classic" measuring technique aggressive, harmless fluids (e.g. water or
VDI 2035/NORM 5195).
0
PN 16 both ports with connections for "classic" measuring technique

both ports press connection Measuring method:
DN 15 15 mm 3.88 (10) 1060151 differential pressure and taking the presetting
DN 15 18 mm 3.88 (10) 1060152 values into consideration.
DN 20 22 mm 5.71 (10) 1060154 Measuring gauges: page 3.96 to 3.94
DN 25 28 mm 8.89 (10) 1060156 Function:
DN 32 35 mm 19.45 (5) 1060158 Oventrop double regulating and commissioning
DN 40 42 mm 27.51 (5) 1060160 valves are installed in the risers of central
DN 50 54 mm 38.78 (5) 1060162 heating and cooling systems and serve to
various circuits of the system. Installation is
possible in either the supply or the return pipe.
Body and bonnet made of bronze, stem and

disc made of brass resistant to
dezincification (DZR), disc with PTFE seal, blind
plug made of brass resistant to dezincification
(DZR). Colour rings to mark the supply (red)
and return pipe (blue) are supplied with each
valve.
Description "Hydrocontrol VPR":

Press connection:
according to DIN EN 1057 / DVGW GW 392,
10088 / DVGW GW 541 and thin-walled
C-steel pipe (material no. E195/1.0034)
according to DIN EN 10305-3. Pressing
must be carried out to tighten the connection.
Only use press jaws with the original contours
SANHA (SA), Geberit-Mapress (MM) or Viega
(Profipress) in corresponding size. Processing
must be carried out according to the
Awards:
International Design Award
Baden-Wrttemberg
Award iF

information":

Bonnets: Page 3.43
3.28 2017
Hydronic balancing in heating "Hydrocontrol VFC" Double regulating
and cooling systems and commissioning valves PN 16
"Hydrocontrol VFC" Double regulating Application:

(presettable, flanged connection, cast iron)
3
"classic" measuring technique aggressive, harmless fluids (e. g. water or
both ports flanged according to DIN EN 1092-2 to VDI 2035/NORM 5195).
with mounted accessories set no. 2 = 2 pressure test points G
For cooling systems: Please provide frost
DN 20 4.80 1062646 protection and diffusion tight insulation!
DN 25 8.40 1062647
GG25
DN 32 17.10 1062648 Measuring method:
PN1
6
OV DN 40 26.90 1062649 Determination of the flow rate by measuring the
0
2
4
6
DN 50 36.00 1062650 differential pressure and taking the presetting
values into consideration.
0
2
4
6
0

valves with secured infinitely adjustable
DN 65 98.00 1062651 presetting controllable at any time by use of
DN 80 122.20 1062652 the flow limiting device.
DN 100 201.00 1062653 Lengths according to DIN EN 558-1, basic
DN 125 293.00 1062654 series 1.
DN 150 404.30 1062655 All functioning components in one plane.
The double regulating and commissioning

DN 200 814.50 1062656 valves may be installed in either the supply or
DN 250 1,200.00 1062657 the return pipe.
DN 300 1,600.00 1062658
DN 350 2,250.00 1062659 Function:
DN 400 3,750.00 1062660 Oventrop double and regulating commissioning
valves are installed in the pipework of central
Larger sizes on demand. heating and cooling systems and serve to
various circuits of the system.
both ports flanged with hole circle according to ANSI* Further additional functions:
with mounted accessories set no. 2 = 2 pressure test points G Regulation, isolation.
Infinitely adjustable presetting.
DN 20 4.80 1062946 The pressure loss can be controlled exactly by
DN 25 8.40 1062947 using the pressure test points.
DN 32 17.10 1062948
DN 40 26.90 1062949 Description "Hydrocontrol VFC":
DN 50 36.00 1062950 Max. operating pressure ps: 16 bar (PN 16)
DN 65 98.00 1062951
DN 80 122.20 1062952 Body (DN 20 - DN 300) made of cast iron (EN-
DN 100 201.00 1062953 GJL - 250 DIN EN 1561), DN 350 and DN 400
DN 125 293.00 1062954 made of nodular cast iron (EN-GJS-500 DIN
DN 150 404.30 1062955 EN 1563).
Disc with PTFE or EPDM seal.
Maintenance-free stem seal due to double
O-ring made of EPDM.
DN 200 814.50 1062956
DN 250 1,200.00 1062957 Award "Hydrocontrol VFC":
DN 300 1,600.00 1062958
DN 350 2,250.00 1062959 Pragotherm Prag
DN 400 3,750.00 1062960
*US standard, class 150

both ports flanged according to DIN EN 1092-2
information":
GG25
DN 20 4.80 1688746
6
PN1
OV
0
0
2
4
6
DN 25 8.40 1688747
DN 32 17.10 1688748
2
4
6
0
DN 40 26.90 1688749
DN 50 36.00 1688750 16887..:
Type approval for shipbuilding (DNV-GL).

2017 3.29
"Hydrocontrol VFC" Double regulating and
Hydronic balancing in heating "Hydrocontrol VFR" Double regulating and
"Hydrocontrol VFC" Double regulating and Application:

with mounted accessories set no. 2 = 2 pressure test points G aggressive, harmless fluids (e. g. water or
DN 20 4.80 1062676 to VDI 2035/NORM 5195).
DN 32 17.10 1062678 Determination of the flow rate by measuring the
DN 50 36.00 1062680 values into consideration.

valves with secured infinitely adjustable
presetting controllable at any time by use of
DN 65 98.00 1062681 the flow limiting device.
DN 80 122.20 1062682 Lengths according to DIN EN 558-1, basic
GG25
PN
6 DN 100 201.00 1062683 series 1.
OV
DN 125 293.00 1062684 All functioning components in one plane.
DN 150 404.30 1062685
0
2
4
6
8
0
2
4
6
8 0
Function:
DN 200 814.50 1062686 valves are installed in the pipework of central
heating and cooling systems and serve to
GG25
PN 6
OV various circuits of the system.
Further additional functions:
Regulation, isolation.
The pressure loss can be controlled exactly by
"Hydrocontrol VFR" Double regulating and using the pressure test points.
commissioning valves PN 16 Lead lockable presetting.
(presettable, flanged connection, bronze) The double regulating and commissioning
"classic" measuring technique valves may be installed in either the supply or
both ports flanged according to DIN EN 1092-2 the return pipe.
Description "Hydrocontrol VFC":
DN 50 36.00 1062350
GG25
PN1
6 Body (DN 20 - DN 200) made of cast iron (EN-
OV
0
GJL - 250 DIN EN 1561).
Disc with PTFE seal.
2
4
0 6
2
4
6

0
DN 65 98.00 1062351 Description "Hydrocontrol VFR":

DN 125 293.00 1062354 Body, bonnet and disc made of bronze,
DN 150 404.30 1062355 stainless steel stem, disc with PTFE seal.
DN 200 814.50 1062356
The bronze double regulating and
commissioning valves "Hydrocontrol VFR" may
also be used for cold salt water (max. 38 C)
and domestic water.

information":
GG25
DN 50 36.00 1688350
6
PN1
OV
0
0
2
4
6
DN 200 814.50 1688356
16883..:
2
4
6
0
Type approval for shipbuilding (DNV-GL).

Insulation shells: Pages 8.20, 3.44
3.30 2017
"Hydrocontrol VFN" Double regulating and
Hydronic balancing in heating "Hydrocontrol VGC" Double regulating and
"Hydrocontrol VFN" Double regulating and Application:

(presettable, flanged connection, nodular cast iron)
3
"classic" measuring technique aggressive, harmless fluids (e. g. water or
both ports flanged according to DIN EN 1092-2 suitable water and glycol mixtures according
with mounted accessories set no. 2 = 2 pressure test points G to VDI 2035/NORM 5195).
Measuring method:
DN 100 201.00 1062453 values into consideration.
DN 125 293.00 1062454 Measuring gauges: page 3.94 to 3.96
DN 150 404.30 1062455
Function:
DN 200 814.50 1062456
DN 250 1,200.00 1062457
DN 300 1,600.00 1062458
The pressure loss can be controlled exactly by
using the pressure test points.
Lead lockable presetting.
valves may be installed in either the supply or
the return pipe.
Description "Hydrocontrol VFN":

"Hydrocontrol VGC" Double regulating and Body made of nodular cast iron (EN-GJS - 500
commissioning valves PN 25 DIN EN 1563), stem made of brass resistant to
(presettable, groove connection, cast iron) dezincification. Disc with PTFE seal.
"classic" measuring technique Maintenance-free stem seal due to double
both ports groove connection for couplings O-ring made of EPDM.
Description "Hydrocontrol VGC":
DN 80 122.20 1063052 Body made of cast iron (EN-GJL - 250 DIN EN
DN 100 201.00 1063053 1561), stem made of brass resistant to
DN 125 293.00 1063054 dezincification.
DN 125 293.00 1064054 Disc with PTFE seal. Maintenance-free stem
DN 150 404.30 1063055 seal due to double O-ring made of EPDM.
DN 150 404.30 1064055
DN 200 814.50 1063056

DN 250 1,200.00 1063057
DN 300 1,600.00 1063058
Suitable for couplings of the systems Victaulic and Grinell and similar.
Item no. DN L D H d
1063051 65 290 73.0 200 160
1064051 65 290 76.1 200 160
1063052 80 310 88.9 215 160
1063053 100 350 114.3 244 160
1064054 125 400 139.7 289 160
1063054 125 400 141.3 289 160
1064055 150 480 165.1 293 160
1063055 150 480 168.3 293 160
1063056 200 600 219.1 467 300
1063057 250 730 273.0 480 300
1063058 300 850 323.9 515 300

2017 3.31
"Hydrocontrol STR" Double regulating and commissioning valves PN 25
Hydronic balancing in heating "Hydrocontrol MTR" Double regulating and commissioning valves PN 25
and cooling systems "Hydrocontrol MPR" Double regulating and commissioning valves PN 16
Packing
unit
"Hydrocontrol STR" Double regulating and commissioning valves Application "Hydrocontrol STR":
3 PN 25
(solar, threaded connection, bronze)
Solar plants with closed circuits, for operation
with non-aggressive, harmless fluids (e. g.
with integrated metering station, quick-coupling measuring technique, water or suitable water and glycol mixtures
both ports compression connection for according to VDI 2035/NORM 5195).
compression fittings "Regusol" Measuring method:
DN 20 LF 1.04 (10) 1369050 differential pressure via the metering station.
DN 20 MF 2.60 (10) 1369055
Description "Hydrocontrol STR":
both ports female thread according to EN 10226 Operating temperature ts: -20 C up to +200 C
Especially for solar plants. As the valve has no
DN 20 LF 1.04 (10) 1369062 isolation function, a minimum flow rate is
DN 20 MF 2.60 (10) 1369065 guaranteed. It is used for the hydronic
balancing of collector fields.
Accessories:
Compression fittings "Regusol": page: 9.31
"Hydrocontrol MTR" Double regulating and commissioning valves Application "Hydrocontrol MTR/MPR":
PN 25 Central heating and cooling systems with
(metering station, threaded connection, bronze) closed circuits, for operation with non-
with integrated metering station, "classic" measuring technique aggressive, harmless fluids (e.g. water or
both ports female thread according to EN 10226 to VDI 2035/NORM 5195).
Measuring method:
DN 15 LF 0.55 (10) 1060464 Determination of the flow rate by measuring the
DN 15 MF 1.15 (10) 1060434 differential pressure via the metering station.
DN 15 HF 2.10 (10) 1060404 Modification of the flow rates irrespective of the
DN 20 3.70 (10) 1060406 presetting values can be read off directly with
DN 25 6.10 (10) 1060408 the help of the measuring gauges
DN 32 12.50 (5) 1060410 "OV-DMC 3"/OV-DMC 2"/"OV-DMPC".
DN 40 18.10 (5) 1060412
DN 50 30.50 (5) 1060416 Description "Hydrocontrol MTR":
"Hydrocontrol MPR" Double regulating and commissioning valves 362,5 psi
PN 16 Operating temperature ts: -20 C up to +150 C
Colour rings to mark the supply (red) and the
(metering station, press connection, bronze)
return pipe (blue) are supplied with each valve.
with integrated metering station, "classic" measuring technique
Description "Hydrocontrol MPR":
232 psi
DN 15 LF 15 mm 0.55 (10) 1060651 Operating temperature ts: -20 C up to +120 C
DN 15 MF 15 mm 1.15 (10) 1061651
DN 15 HF 15 mm 2.10 (10) 1060451 Colour rings to mark the supply (red) and the
DN 15 HF 18 mm 2.10 (10) 1060452 return pipe (blue) are supplied with each valve.
DN 20 22 mm 3.70 (10) 1060454
DN 25 28 mm 6.10 (10) 1060456 Press connection:
DN 32 35 mm 12.50 (5) 1060458 For the direct connection of copper pipes
DN 40 42 mm 18.10 (5) 1060460 according to DIN EN 1057 / DVGW GW 392,
DN 50 54 mm 30.50 (5) 1060462 stainless steel pipes according to DIN EN
Only use press jaws with the original contours
SANHA (SA), Geberit-Mapress (MM) or Viega
must be carried out according to the
kvs values of the metering-stations

"Hydrocontrol MTR/MPR":
DN 15 LF: 0.55
DN 15 MF: 1.2
DN 15 HF: 2.2
DN 20: 4.25
DN 25: 8.6
DN 32: 15.9
DN 40: 23.4
Accessories: Page 3.42 DN 50: 47
3.32 2017
Hydronic balancing in heating 3.c "Hydrocontrol" Regulating and isolating valves
and cooling systems "Hydrocontrol MFC" Double regulating and commissioning valves PN 16
"Hydrocontrol MFC" Double regulating and commissioning valves Application:

PN 16
(metering station, flanged connection, cast iron)
3
"classic" measuring technique aggressive, harmless fluids (e.g. water or
both ports flanged according to DIN EN 1092-2 VDI 2035/NORM 5195).
For cooling systems: Please provide frost
DN 65 86.70 1065851 protection and diffusion tight insulation!
DN 80 102.00 1065852
DN 150 400.00 1065855 differential pressure via the metering station.
DN 200 750.00 1065856 Oventrop double regulating and commissioning

DN 250 1,090.00 1065857 valves, with secured infinitely adjustable
DN 300 1,500.00 1065858 presetting controllable at any time by use of
the flow limiting device.
Lengths according to DIN EN 558-1, basic
series 1.
All functioning components in one plane.

valves may be installed in either the supply or
the return pipe.
Function:
achieve a hydronic balance between the

Description "Hydrocontrol MFC":

Body made of cast iron (EN-GJL - 250 DIN EN

1561).
Disc with PTFE or EPDM seal.
EPDM O-ring.
2017 3.33
"Hydrocontrol ATR" Isolating and orifice valves PN 25 / PN 16
Hydronic balancing in heating "Hydrocontrol APR" Isolating and orifice valves PN 16
and cooling systems "Hydrocontrol AFC" Isolating and orifice valves PN 16
Packing
unit
"Hydrocontrol ATR" Isolating and orifice valves PN 25 / PN 16 Application:

3 (with isolating facility, threaded connection, bronze)
with two threaded ports for "classic" measuring technique
(closed with blind plugs) aggressive, harmless fluids (e. g. water or
without presetting suitable water and glycol mixtures according
to VDI 2035/NORM 5195).
PN 25 both ports female thread according to EN 10226
Description "Hydrocontrol ATR":
OV
DN 15 3.88 (10) 1067504 or 16 bar (PN 16)
DN 25 8.89 (10) 1067508
DN 32 19.45 (5) 1067510 Body and bonnet made of bronze, stem and
DN 40 27.51 (5) 1067512 disc made of brass resistant to dezincification
DN 50 38.78 (5) 1067516 (DZR), disc with PTFE seal, blind plugs made of
brass resistant to dezincification (DZR).
PN 16 both ports female thread according to EN 10226 Colour rings to mark the supply (red) and the
return pipe (blue) are supplied with each valve.
DN 65 50.00 1067520
Male thread
PN 16 both ports male thread with collar nut DN 10 - G
DN 15 - G
DN 10 2.88 (10) 1067603 DN 20 - G 1
OV
DN 15 3.88 (10) 1067604 DN 25 - G 1

DN 20 5.71 (10) 1067606 DN 32 - G 1
DN 25 8.89 (10) 1067608 DN 40 - G 1
DN 32 19.45 (5) 1067610 DN 50 - G 2
DN 40 27.51 (5) 1067612
DN 50 38.78 (5) 1067616 Description "Hydrocontrol APR":
"Hydrocontrol APR" Isolating and orifice valves PN 16
(with isolating facility, press connection, bronze)
Press connection:
without presetting
PN 16 both ports press connection
DN 15 15 mm 3.88 (10) 1067551 must be carried out to tighten the connection.
DN 15 18 mm 3.88 (10) 1067552 Only use press jaws with the original contours
DN 20 22 mm 5.71 (10) 1067554 SANHA (SA), Geberit-Mapress (MM) or Viega
DN 25 28 mm 8.89 (10) 1067556 (Profipress) in corresponding size. Processing
DN 32 35 mm 19.45 (5) 1067558 must be carried out according to the
DN 40 42 mm 27.51 (5) 1067560 installation instructions.
DN 50 54 mm 38.78 (5) 1067562
"Hydrocontrol AFC" Isolating and orifice valves PN 16 information":
(with isolating facility, flanged connection, cast iron)

without presetting
DN 65 98.00 1062051 Description "Hydrocontrol AFC":

DN 125 293.00 1062054
DN 150 404.30 1062055 Body made of cast iron.
3.34 2017
and cooling systems 3.d "Hydromat" Differential pressure and flow regulators
Page
3.d "Hydromat" Differential pressure and flow regulators 3

0
0
6
0
0
12
Content
00
8
"Hydromat QTR" Flow regulators PN 16 3.36

OV
"Hydromat DTR" Differential pressure regulators PN 16 3.37

"Hydrocontrol"/ "Hydromat" System examples 3.39
"Hydromat DFC" Differential pressure regulators PN 16 3.38
2017 3.35
Hydronic balancing in heating 3.d "Hydromat" Differential pressure and flow regulators
and cooling systems "Hydromat QTR" Flow regulators PN 16
Flow
range
"Hydromat QTR" Flow regulators PN 16 Application:

3 (flow control, threaded connection, bronze)
with draining facility
aggressive, harmless fluids (e. g. water or
both ports female thread according to EN 10226 suitable water and glycol mixtures according to
VDI 2035/NORM 5195).
0
0
6
0
0
12
DN 15 100 - 800 kg /h 1061504

00
8
DN 20 100 - 1,200 kg /h 1061506 Function:

OV
DN 25 200 - 1,900 kg /h 1061508 Oventrop flow regulators for a local or central
DN 32 300 - 3,000 kg /h 1061510 regulation of the flow in existing or new
DN 40 400 - 4,000 kg /h 1061512 buildings. Installation is possible in either the
supply or the return pipe. The flow rate is set to
the required nominal value. Oventrop flow
both ports male thread with collar nuts regulators are proportional regulators working
without auxiliary energy. With the flow in the
0
0
6
0
0
12
DN 15 100 - 800 kg /h 1061604 installation increasing, the valve disc closes

0
0 8
DN 20 100 - 1,200 kg /h 1061606 down to maintain a constant flow within a

OV
DN 25 200 - 1,900 kg /h 1061608 necessary proportional band.
DN 32 300 - 3,000 kg /h 1061610
DN 40 400 - 4,000 kg /h 1061612 Description "Hydromat QTR":
Body and bonnet made of bronze.
The regulators DN 15 and DN 20 with female
thread are suitable for use with the
compression fittings, item no. 10271.., page
3.45.
Male thread:
DN 15 - G
DN 20 - G 1
DN 25 - G 1
DN 32 - G 1
DN 40 - G 1

information":
Awards:
Award iF
Interclima Paris
Trophe du Design
Aqua-Therm Prague

Bonnets: Page 3.43
Measuring gauges: Page 3.96
3.36 2017
and cooling systems "Hydromat DTR" Differential pressure regulators PN 16
"Hydromat DTR" Differential pressure regulators PN 16 Application:

(differential pressure control, threaded connection, bronze)
with connection set and draining facility
3
both ports female thread according to EN 10226 suitable water and glycol mixtures according to
Nominal value: 50 to 300 mbar, infinitely adjustable VDI 2035/NORM 5195).
DN 15 2.50 1064504 Function:
DN 20 5.00 1064506 Oventrop differential pressure regulators are
DN 25 7.50 1064508 proportional regulators working without
DN 32 10.00 1064510 auxiliary energy. They are used in existing or
DN 40 15.00 1064512 new buildings for a local or central regulation of
DN 50 34.00 1064516 the differential pressure.
With the differential pressure in the installation
increasing, the valve disc closes down to
both ports female thread according to EN 10226 maintain a constant differential pressure within
Nominal value: 250 to 700 mbar, infinitely adjustable a necessary proportional band.
The differential pressure is set to the desired
DN 15 2.50 1064704 nominal value. The nominal value is infinitely
DN 20 5.00 1064706 adjustable and lockable.
DN 25 7.50 1064708 The differential pressure regulators are
DN 32 10.00 1064710 designed for installation in the return pipe.
DN 40 15.00 1064712 Further additional functions: Isolating, filling
DN 50 34.00 1064716 and draining.
The regulators are supplied complete with
both ports male thread with collar nut connection set (capillary length 1 m).
Nominal value: 50 to 300 mbar, infinitely adjustable Male thread:
DN 15 - G
DN 15 2.50 1064604 DN 20 - G 1
DN 20 5.00 1064606 DN 25 - G 1
DN 25 7.50 1064608 DN 32 - G 1
DN 32 10.00 1064610 DN 40 - G 1
DN 40 15.00 1064612 DN 50 - G 2
DN 50 34.00 1064616 Description "Hydromat DTR":
232 psi
Body and bonnet made of bronze. Disc and
DN 15 2.50 1064804 stem made of brass resistant to dezincification
DN 20 5.00 1064806 (DZR), disc with EPDM seal.
DN 25 7.50 1064808 Maintenance-free stem seal due to double
DN 32 10.00 1064810 O-ring made of EPDM.
The regulators DN 15 and DN 20 are suitable
DN 40 15.00 1064812
for use with the compression fittings, item no.
DN 50 34.00 1064816
10271.., page 3.45.

information":
Bonnets: Page 3.43

2017 3.37
and cooling systems "Hydromat DFC" Differential pressure regulators PN 16
"Hydromat DFC" Differential pressure regulators PN 16 Application:

3 (differential pressure control, flanged connection, cast iron)
with connection set and draining facility
both ports flanged according to EN 1092-2 suitable water and glycol mixtures according to
Nominal value: 200 to 1000 mbar, infinitely adjustable VDI 2035/NORM 5195).
DN 65 52.00 1064651 Function:
DN 80 75.00 1064652 Oventrop differential pressure regulators are
DN 100 110.00 1064653 proportional regulators working without
DN 125 145.00 1064654 auxiliary energy. They are used in existing or
DN 150 170.00 1064655 new buildings for a local or central regulation of
the differential pressure. With the differential
pressure in the installation increasing, the valve
both ports flanged according to EN 1092-2 disc closes down to maitain a constant
Nominal value: 400 to 1800 mbar, infinitely adjustable differential pressure within a necessary
proportional band.
DN 65 52.00 1064751 The differential pressure ist set to the required
DN 80 75.00 1064752 nominal value.
DN 100 110.00 1064753 The nominal value is infinitely adjustable and
DN 125 145.00 1064754 lockable.
DN 150 170.00 1064755 The differential pressure regulators are
DN 200 420.00 1064756 designed for installation in the return pipe.
both ports flanged with hole circle according to ANSI Isolation, filling and draining
The regulators are supplied complete with
DN 65 52.00 1064951 connection set (capillary length 1 m).
DN 80 75.00 1064952
DN 100 110.00 1064953 Description "Hydromat DFC":
Body made of cast iron (EN-GJL-250 DIN EN
1561).
Lengths according to DIN EN 558-1, basic
series 1.
Bonnet made of bronze, stem made of brass
resistant to dezincification (DZR), disc made of
stainless steel with EPDM seal.

information":
3.38 2017
and cooling systems "Hydrocontrol"/ "Hydromat" System examples
Further examples can be found in the product range Flow, pressure and temperature balancing.
Standard installation:
3
for instance consisting of the double regulating and commissioning
valve Hydrocontrol VTR and the isolating and orifice valve
Hydrocontrol ATR for installations in which a hydronic balancing
between the individual supply risers is required.
Hydrocontrol ATR
Hydrocontrol VTR
Differential pressure regulation:

for instance consisting of the differential pressure regulator
Hydromat DTR and the isolating and orifice valve Hydrocontrol ATR
for installations with presettable thermostatic valves.
Hydrocontrol ATR Hydromat DTR
Differential pressure regulation with flow limitation:

for instance consisting of the differential pressure regulator
Hydromat DTR and the double regulating and commissioning valve
Hydrocontrol VTR for installations without presettable thermostatic
valves or radiator lockshield valves in which the flow rate shall
additionally be limited to the calculated value.
Hydrocontrol VTR Hydromat DTR
Flow regulation:
for instance consisting of the flow regulator Hydromat QTR for
installations in which the rate in the individual supply risers shall be
constantly maintained.
Hydromat QTR
2017 3.39
and cooling systems 3.e Accessories for "Hydrocontrol", "Hydromat", "Hycocon"
Page
3.e Accessories for "Hydrocontrol", "Hydromat", "Hycocon" 3

Content
Connection sets 3.42
Bonnets 3.43
Diaphragm actuators 3.43
Accessories 3.44
Tailpipe sets 3.45
Metering stations 3.46
2017 3.41
Hydronic balancing in heating 3.e Accessories for "Hydrocontrol", "Hydromat", "Hycocon"
and cooling systems Connection sets
Packing
unit
Connection sets
3 for subsequent conversion of double regulating and
commissioning valves "Hydrocontrol"
and for valves with "classic" measuring technique
Set 1 = 1 fill and drain (50) 1060191

ball valve G
Pressure test points made of brass resistant

Set 2 = 2 pressure test point G , (50) 1060281 to dezincification (DZR).
"classic" measuring technique
Set 3 = 1 pressure test point G, (50) 1060381

1 fill and drain ball valve G
Measuring adapter, (50) 1060298

Extended measuring adapter.

Set 13 = measuring adapter, (50) 1060296
with fill and drain ball valve G
For differential pressure measurement at

2 measuring adapters, (10) 1060299 the differential pressure regulators
"classic" measuring technique Hydromat DTR/DFC.
For differential pressure measurement, for

Extension pressure test point (50) 1688290 instance at the double regulating and
(L = 80 mm) with T-piece commissioning valve, and simultaneous
connection connection of the capillary of the differential
pressure regulator.
Set 9 = 2 measuring needles for (50) 1069199
Quick-coupling technic.
Set 10 = 2 pressure test points (50) 1060291
G
Quick-coupling technic.
Set 11 = 1 pressure test point G (50) 1060391

1 fill and drain ball valve G
Pressure test point extension, can only be

L = 80 mm (1 extension) (50) 1060295 mounted after having drained the system.
L = 40 mm (1 extension) 1688295
The pressure test point extensions can be

L = 100 mm (50) 1060282 mounted without draining the system.
(2 pressure test points
with extensions)
Bronze pressure test points Set = 2 pressure test points G
"classic" measuring technique (50) 4209090
3.42 2017
Stem extensions
Hydronic balancing in heating Bonnets
and cooling systems Diaphragm actuators
Packing
unit
Stem extensions For double regulating and commissioning

valves "Hydrocontrol VTR/ VPR/ MTR/ VFR/
VFC/ VFN/ VGC/ AFC".
3
L = 35 mm.
DN 10 - DN 50 1688296 For valve insulation with standard insulation
DN 65 - DN 150 1688297 material. Not suitable for use with Oventrop
insulation shells.
The capillary can also be used for

Capillary 2 m long (10) 1062095 "Hydromat DTR" manufactured
for "Hycocon DTZ" since 2012.
and "Hydromat DTR"
Capillary 5 m long (10) 1062097
for "Hycocon DTZ"
and "Hydromat DTR"
Bonnets
for bronze double regulating and commissioning valves
"Hydrocontrol VTR/VPR", "Hydrocontrol MTR/MPR" and cast iron
double regulating and commissioning valves "Hydrocontrol VFC"
The bonnets are required for replacement

0
DN 10 1069003 purposes or for the conversion of e. g. orifice
DN 15 1069004 and isolating valves to double regulating and
DN 20 1069006 commissioning valves.
DN 25 1069008 Bonnets item no. 4208192 (page 8.32) only
DN 32 1069010 for "Hydrocontrol MTR/MPR" DN 15 LF.
DN 40 1069012
DN 50 1069016
for flow regulator "Hydromat QTR"

16 0 0 0 0 8
12 0 0
DN 15 1061592
DN 20 1061593
DN 25 1061594
DN 32 1061595
DN 40 1061596
Diaphragm actuators
for differential pressure regulator "Hydromat DTR",
complete with connection set
DN 15 1064592
DN 20 1064593
DN 25 1064594
DN 32 1064595
DN 40 1064596
DN 50 1064597
DN 15 1064792
DN 20 1064793
DN 25 1064794
DN 32 1064795
DN 40 1064796
DN 50 1064797
2017 3.43
Hydronic balancing in heating Insulation shells
Packing
unit
Insulation shells
3
Insulation shells made of polyethylene flexible foam Meet the requirements of the German
for Hydrocontrol VTR/VPR, Hydrocontrol ATR/APR, Energy Saving Directive (EnEV) according
Hydromat QTR and Hydromat DTR to appendix 5, table 1, line 5.
Operating temperature ts: +100 C
Only for heating systems.
DN 10 - DN 15 (100) 1060481
DN 20 (100) 1060482 Building material class B1 according to
DN 25 (125) 1060483 DIN 4102.
DN 32 (100) 1060484
DN 40 (100) 1060485
DN 50 (100) 1060486
Insulation shells made of polyurethane rigid foam Insulation shells (two-part) made of
for "Hydrocontrol VTR/VPR", "Hydrocontrol ATR/APR", polyurethane with tongue-and-groove fitting.
"Hydromat QTR", "Hydromat DTR", as well as for free-flow Meet the requirements of the German Energy
OV
DN valves "Aquastrom F" and "Aquastrom KFR" valves Saving Directive (EnEV), appendix 5, table 1,
Operating temperature ts: +130C (for short periods up to +150C) line 5.
Building material class B2 according to DIN
DN 10 - DN 15 1060081 4102.
DN 20 1060082
DN 25 1060083
DN 32 1060084
DN 40 1060085
DN 50 1060086
Insulation shells made of polyurethane rigid foam For heating and cooling systems.
with polystyrene shell Building material class B2 according to
for double regulating and commissioning valves DIN 4102.
Hydrocontrol VFC, Hydrocontrol VFR, Meet the requirements of the German
Hydrocontrol VFN, Hydrocontrol VGC and "Hydrocontrol AFC" Energy Saving Directive (EnEV) according to
Operating temperature ts: 10 C up to +130 C appendix 5, table 1, line 5.
Cold insulation:
Min. fluid temperature: +6 C
The insulation shells have to be bonded hermetically (restricted
diffusion tightness at low fluid temperature and at high ambient
DN 20 1062581
DN 25 1062582
DN 32 1062583
DN 40 1062584
DN 50 1062585
DN 65 1062586
DN 80 1062587
DN 100 1062588
DN 125 1062589
DN 150 1062590
Accessories
for the double regulating and commissioning valves
"Hydrocontrol VTR/VPR" (up to DN 50),
"Hydrocontrol VFC" (up to DN 50) and "Hydrocontrol MTR/MPR"
Lead sealing set (10 fold) (10) 1089091 Consisting of lead seal and locking wire.
Locking set (1 fold) (25) 1060180 Consisting of locking cap, lead seal and
locking wire.
Marking ring Colour rings for marking the risers to be

clipped onto the handwheel.
blue (50) 1069650
red (50) 1069651
violet (50) 1069652
green (50) 1069653
3.44 2017
Hydronic balancing in heating Tailpipe sets
and cooling systems "Ofix" Compression fittings
Packing
unit
Tailpipe sets Application:

for "Hycocon", "Hydrocontrol" and "Hydromat" Central heating and cooling systems with
3
Set 5 = 2 weldable tailpipes aggressive, harmless fluids (e. g. water or
for valve DN 10 (10) 1060591 VDI 2035/NORM 5195).
for valve DN 15 (10) 1060592
for valve DN 20 (10) 1060593 Max. operating pressure ps: 16 bar (PN 16)
for valve DN 25 (10) 1060594 Operating temperature ts: -20 C up to +150 C
for valve DN 32 (5) 1060595
for valve DN 40 (5) 1060596
for valve DN 50 (5) 1060597
Set 6 = 2 solder tailpipes
18 mm for valve DN 15 (10) 1061091

15 mm for valve DN 15 (10) 1061092
18 mm for valve DN 20 (10) 1061093
22 mm for valve DN 20 (10) 1061094
28 mm for valve DN 25 (10) 1061095
35 mm for valve DN 32 (5) 1061096
42 mm for valve DN 40 (5) 1061097
54 mm for valve DN 50 (5) 1061098
Set 7 = 2 male threaded tailpipes
R for valve DN 10 (10) 1061491

R for valve DN 15 (10) 1061492
R for valve DN 20 (10) 1061493
R 1 for valve DN 25 (10) 1061494
R 1 for valve DN 32 (5) 1061495
R 1 for valve DN 40 (5) 1061496
R 2 for valve DN 50 (5) 1061497
Set 8 = 2 female threaded tailpipes
Rp for valve DN 15 (10) 1061392

Rp for valve DN 20 (10) 1061393
Rp 1 for valve DN 25 (10) 1061394
Rp 1 for valve DN 32 (5) 1061395
"Ofix" Compression fittings Application:

brass
for female thread Central heating and cooling systems with
"Ofix CEP" for copper pipes according to DIN EN 1057 aggressive, harmless fluids (e. g. water or
compression nut nickel plated, metal to metal sealing suitable water and glycol mixtures according to
VDI 2035/NORM 5195).
G x 10 mm (10) 1027151
G x 12 mm (10) 1027152 Max. operating pressure ps: 25 bar (PN 25)
G x 10 mm (10) 1027150 Operating temperature ts: -20 C up to +150 C
G x 12 mm (10) 1027153
G x 14 mm (10) 1027154 The "Ofix" compression fittings for female
G x 15 mm (10) 1027155 thread are not supplied as a set of 2 pieces.
G x 16 mm (10) 1027156
G x 18 mm (10) 1027157
G x 22 mm (10) 1027158
2017 3.45
and cooling systems Metering stations
Packing
unit
Metering stations Application:

3 Central heating and cooling systems with
PN 25 with 2 pressure test points
classic measuring technique aggressive, harmless fluids (e. g. water or
made of brass resistant to dezincification (DZR) VDI 2035/NORM 5195).
inlet port female thread, outlet port male thread The metering stations DN 15 and DN 20 are
suitable for use with "Ofix" compression
DN 15 LF 0.55 (10) 1060644 fittings, item no. 10271.., page 3.45 and
DN 15 MF 1.20 (10) 1060634 1028155, page 1.140.
DN 15 2.20 (10) 1060604
DN 20 4.25 (10) 1060606 Measuring method:
DN 25 8.60 (10) 1060608 Determination of the flow rate by measuring the
DN 32 15.90 (10) 1060610 differential pressure via the metering station.
DN 40 23.70 (10) 1060612 Modification of the flow rates irrespective of the
the help of the measuring gauges
"OV-DMC 3"/"OV-DMC 2"/"OV-DMPC".
Wafer type to fit between two flanges Measuring gauges: page 3.94 to 3.96
classic measuring technique Description:
Metering stations made of brass resistant to
made of stainless steel PN 16 dezincification.
with 2 extended pressure test points Max. operating pressure: ps 25 bar (PN 25)
DN 65 102.00 1060751
DN 80 120.00 1060752 The metering stations made of brass resistant
DN 100 234.00 1060753 to dezincification (DZR) can be combined with
DN 125 335.00 1060754 any valves with female thread according to
DN 150 522.00 1060755 EN 10226, e. g.
DN 200 780.00 1060756
DN 250 1,197.00 1060757 "Hydrocontrol ATR"
DN 300 1,810.00 1060758 item no.. 10675..
DN 350 2,050.00 1060759 "Hycocon ATR"
DN 400 2,650.00 1060760 item no. 10673..
DN 450 3,400.00 1060761 Gate valves
DN 500 4,200.00 1060762 item no.. 10400/30..
DN 600 6,250.00 1060763 Oblique pattern globe valves
DN 700 10,690.00 1060764 item no.. 10502/03.. and 10520/21..
DN 800 14,000.00 1060765 "Aquastrom" valves
DN 900 17,577.00 1060766 item no. 420....
DN 1,000 22,540.00 1060767
Double regulating and commissioning valves
"Hydrocontrol MTR/MPR/MFC" with integrated
made of stainless steel PN 25
metering station: pages 3.32 and 3.33
with 2 extended pressure test points
DN 100 234.00 1060853 Description:

DN 125 335.00 1060854 Metering stations for installation between
DN 150 522.00 1060855 flanges.
DN 200 780.00 1060856 Max. operating pressure ps: 16 bar/ 25 bar
DN 250 1,197.00 1060857 (PN 16/ PN 25)
DN 300 1,810.00 1060858
(1060771 - 78: ts: -10 C up to +120 C)
DN 350 2,050.00 1060859
The metering stations for installation between
DN 400 2,650.00 1060860
flanges can be combined with any flanged
DN 450 3,400.00 1060861
valves according to DIN EN 1092, e. g.
DN 500 4,200.00 1060862
"Hydrocontrol VFR" (PN 16)
DN 600 6,250.00 1060863
item no. 10626..
"Hydrocontrol VFC" (PN 16)
made of cast iron (EN-GJL-250 DIN EN 1561) PN 16 item no. 10623..
with 2 extended pressure test points (L = 32 mm) "Hydrocontrol VFN" (PN 25)
item no.: 10624..
DN 65 93.00 1060771
DN 80 126.00 1060772
Larger sizes on demand.
DN 100 244.00 1060773
DN 125 415.00 1060774
Metering stations DN 65 and DN 80 are also
DN 150 540.00 1060775
suitable for flanges PN 25.
DN 200 1,010.00 1060776
DN 250 1,450.00 1060777
DN 300 2,400.00 1060778
3.46 2017
and cooling systems Metering stations
Packing
unit
Pressure test point extension For wafer type metering stations made of cast
L = 80 mm (2 extensions) (50) 1688291

iron item no. 1060771-78. 3
2017 3.47
Hydronic balancing in heating 3.f "Hycoflow" Double regulating and commissioning valves with flow
and cooling systems display
Page
3.f "Hycoflow" Double regulating and commissioning valves with flow display 3
Content
"Hycoflow VTB" 3.50
2017 3.49
3.f "Hycoflow" Double regulating and commissioning valves with flow
Hydronic balancing in heating display
and cooling systems "Hycoflow VTB"
Control- Packing
range unit
"Hycoflow VTB" Application:

3 Double regulating and commissiong valve with flow display PN 10 Central heating and cooling systems with
both ports male thread, flat sealing aggressive, harmless fluids (e. g. water or
DN 20 4 - 17 l/min 3.00 (10) 1060906 VDI 2035/NORM 5195).
DN 25 10 - 40 l/min 8.30 (10) 1060908
DN 32 20 - 70 l/min 13.70 (5) 1060910 Measuring method:
Direct reading of the set volume flow.
Function:
Double regulating and commissioning valves
with isolating facility and flow display. They
Inlet port: collar nut, outlet port: male thread facilitate the hydronic balancing of circuits or
parts of the system and can be installed in the
DN 25 5 - 40 l/min 5.50 1060925
supply as well as in the return pipe either
horizontally or vertically.
Description:
Max. operating pressure ps: 10 bar (PN10)
Operating temperature ts: up to 100 C
Thread:
DN 20: G
DN 25: G 1
DN 32: G 1
3.50 2017
and cooling systems 3.g "Cocon" Regulating valves
Page
3.g "Cocon" Regulating valves 3

Content
"Cocon QTR" Pressure independent control valves PN 25 / PN 16 3.56
"Cocon QGC" Pressure independent control valves PN 16 3.57
Accessories for "Cocon QTZ" PN 25 and "Cocon 2TZ" 3.58
Accessories for "Cocon QTZ" PN 16 and "Cocon QTR" 3.58
Accessories for "Cocon QTR" and "Cocon QFC" 3.59
Tailpipe sets 3.60
"Cocon 2TZ" Regulating valves PN 10 3.61
Measuring devices for "Cocon 2TZ" regulating valves 3.61
OV-Flex HC Flexible hoses 3.62
Accessories 3.62
2017 3.51
Hydronic balancing in heating 3.g "Cocon" Regulating valves
and cooling systems "Cocon QTZ" Pressure independent control valves PN 25
Control Packing
range unit
"Cocon QTZ" Pressure independent control valves PN 25 Application:

3 (flow control, threaded connection,
Central heating and cooling systems (like fan
convectors (fan coil units), chilled ceiling
modules, induction air systems, cooling and
connection thread M 30 x 1.5 heating zones) with closed circuits, for
both ports with connections for "classic" measuring technique operation with non-aggressive, harmless fluids
(closed with blind plugs) (e. g. water or suitable water and glycol
Inlet port: coupling, outlet port: female thread 5195).
DN 15 30 - 210 l/h (10) 1143504* Max. operating pressure ps: 25 bar (PN 25)
DN 15 150 - 700 l/h (10) 1143604* Operating temperature ts: -10 C up to +120 C
DN 15 200 - 1300 l/h (10) 1143704*
DN 20 250 - 1800 l/h (10) 1143606* Function:
DN 25 400 - 2500 l/h (10) 1143608* Oventrop pressure independent control valves
DN 32 600 - 4800 l/h (5) 1143610* "Cocon QTZ" control the room temperature
with the help of actuators and thermostats. The
max. flow is set to the required nominal value
with pressure test points "classic" measuring technique necessary proportional band. The installation
Inlet port: coupling, outlet port: female thread can be drained, filled, bled and flushed via the
measuring connections.
DN 15 30 - 210 l/h (10) 1143104*
DN 15 150 - 700 l/h (10) 1143204* Fill and drain ball valve: page 3.42
DN 15 200 - 1300 l/h (10) 1143304*
DN 20 250 - 1800 l/h (10) 1143206* Model both ports male threaded:
DN 25 400 - 2500 l/h (10) 1143208* DN 10: G male threaded connection,
DN 32 600 - 4800 l/h (5) 1143210* flat sealing
both ports with connections for "classic" measuring technique compression fittings "Ofix", pages 1.140, 1.141
(closed with blind plugs) and 1.143.
both ports male thread With insert item no. 1661100 (page 1.125)
DN 10 30 - 210 l/h (10) 1143563*
DN 10 150 - 700 l/h (10) 1143663* DN 20: G 1 male threaded connection for
DN 15 30 - 210 l/h (10) 1143564* compression fittings, page 9.31.
DN 15 150 - 700 l/h (10) 1143664* With insert item no. 1650796 (page 3.59)
DN 15 200 - 1300 l/h (10) 1143764* suitable for flat sealing tailpipes.
DN 20 250 - 1800 l/h (10) 1143666*
DN 25 400 - 2500 l/h (10) 1143668* DN 25: G 1 male threaded connection,
DN 32 600 - 4800 l/h (5) 1143670* flat sealing
with pressure test points "classic" measuring technique DN 32: G 1 male threaded connection,
both ports male thread flat sealing
DN 10 30 - 210 l/h (10) 1143163*

DN 10 150 - 700 l/h (10) 1143263*
DN 15 30 - 210 l/h (10) 1143164*
DN 15 150 - 700 l/h (10) 1143264*
DN 15 200 - 1300 l/h (10) 1143364*
DN 20 250 - 1800 l/h (10) 1143266*
DN 25 400 - 2500 l/h (10) 1143268*
DN 32 600 - 4800 l/h (5) 1143270*

both ports female thread
DN 15 30 - 210 l/h (10) 1147204*

DN 15 150 - 700 l/h (10) 1147304*
DN 15 200 - 1300 l/h (10) 1147404*
DN 20 250 - 1800 l/h (10) 1147306*
DN 25 400 - 2500 l/h (10) 1147308*
DN 32 600 - 4800 l/h (5) 1147310*


Control Packing
range unit

both ports female thread 3
DN 15 30 - 210 l/h (10) 1149204*
DN 15 150 - 700 l/h (10) 1149304*
DN 15 200 - 1300 l/h (10) 1149404*
DN 20 250 - 1800 l/h (10) 1149306*
DN 25 400 - 2500 l/h (10) 1149308*
DN 32 600 - 4800 l/h (5) 1149310*
with mounted metering station

and pressure test points "classic" measuring technique
DN 15 30 - 210 l/h (10) 1144864*

DN 15 150 - 700 l/h (10) 1144964*
DN 15 200 - 1300 l/h (10) 1145064*
DN 20 250 - 1800 l/h (10) 1144966*

Control Packing
range unit
"Cocon QTZ" Pressure independent control valves PN 16 Application:

3 (flow control, threaded connection,
brass resistant to dezincification)
both ports with connections for "classic" measuring technique operation with non-aggressive, harmless fluids
(closed with blind plugs) (e. g. water or suitable water and glycol
Inlet port: coupling, outlet port: female thread 5195).
DN 15 30 - 210 l/h (10) 1145504 Max. operating pressure ps: 16 bar (PN 16),
DN 15 90 - 450 l/h (10) 1145604 232 psi
DN 15 150 - 1050 l/h (10) 1145704 Operating temperature ts: -10 C up to +120 C
DN 20 150 - 1050 l/h (10) 1145506
DN 20 180 - 1300 l/h (10) 1145606 Function:
DN 25 300 - 2000 l/h (5) 1145608 Oventrop pressure independent control valves
DN 32 600 - 3600 l/h (5) 1145610 "Cocon QTZ" control the room temperature
with the help of actuators and thermostats. The
maximum flow is set to the required nominal
with pressure test points "classic" measuring technique value and is constantly maintained within the
Inlet port: coupling, outlet port: female thread necessary proportional band.
DN 15 30 - 210 l/h (10) 1146004 All valves DN 15 and DN 20 are suitable for the
DN 15 150 - 1050 l/h (10) 1146204 installation with copper pipes.
DN 15 90 - 450 l/h (10) 1146104
DN 20 150 - 1050 l/h (10) 1146006 Model one port coupling, one port female
DN 20 180 - 1300 l/h (10) 1146106 thread:
DN 25 300 - 2000 l/h (5) 1146108 Compression fittings page 1.140, reinforcing
DN 32 600 - 3600 l/h (5) 1146110 sleeves page 1.143.
both ports with connections for "classic" measuring technique Model both ports male threaded:
(closed with blind plugs) DN 10: G male threaded connection, flat
both ports male thread sealing
DN 10 30 - 210 l/h (10) 1145563 DN 15: G male threaded connection for

DN 10 90 - 450 l/h (10) 1145663 compression fittings "Ofix", pages
DN 15 30 - 210 l/h (10) 1145564 1.140, 1.141 and 1.143.
DN 15 90 - 450 l/h (10) 1145664 With insert item no. 1661100 (page 1.125)
DN 15 150 - 1050 l/h (10) 1145764 suitable for flat sealing tailpipes.
DN 20 150 - 1050 l/h (10) 1145566
DN 20 180 - 1300 l/h (10) 1145666 DN 20: G 1 male threaded connection for
DN 25 300 - 2000 l/h (5) 1145668 compression fittings, page 9.31.
with pressure test points "classic" measuring technique
both ports male thread DN 25: G 1 male threaded connection,
flat sealing
DN 10 30 - 210 l/h (10) 1146063
DN 10 90 - 450 l/h (10) 1146163 DN 32: G 1 male threaded connection,
DN 15 30 - 210 l/h (10) 1146064 flat sealing
DN 15 90 - 450 l/h (10) 1146164
DN 15 150 - 1050 l/h (10) 1146264 Award:
DN 20 150 - 1050 l/h (10) 1146066 The Chicago Athenaeum:
DN 20 180 - 1300 l/h (10) 1146166 Museum of Architecture and Design
DN 25 300 - 2000 l/h (5) 1146168 GOOD DESIGN Award
DN 32 600 - 3600 l/h (5) 1146170 Nominated for Design Award
of the Federal Republic
of Germany

information":

"Unofix" Refurbishment of one pipe heating systems Page 1.98

Control Packing
range unit

3
DN 15 30 - 210 l/h (10) 1147504
DN 15 90 - 450 l/h (10) 1147604
DN 20 150 - 1050 l/h (10) 1147506
DN 15 150 - 1050 l/h (10) 1147704
DN 20 180 - 1300 l/h (10) 1147606
DN 25 300 - 2000 l/h (5) 1147608
DN 32 600 - 3600 l/h (5) 1147610

DN 15 30 - 210 l/h (10) 1148504

DN 15 90 - 450 l/h (10) 1148604
DN 15 150 - 1050 l/h (10) 1148704
DN 20 150 - 1050 l/h (10) 1148506
DN 20 180 - 1300 l/h (10) 1148606
DN 25 300 - 2000 l/h (5) 1148608
DN 32 600 - 3600 l/h (5) 1148610
with mounted metering station

and pressure test points "classic" measuring technique
DN 15 30 - 210 l/h (10) 1144564

DN 15 90 - 450 l/h (10) 1144664
DN 15 150 - 1050 l/h (10) 1144764
DN 20 150 - 1050 l/h (10) 1144566
DN 20 180 - 1300 l/h (10) 1144666

Hydronic balancing in heating "Cocon QTR" Pressure independent control valves PN 25 / PN 16
and cooling systems "Cocon QFC" Pressure independent control valves PN 16
Control
range
"Cocon QTR" Pressure independent control valves PN 25 / PN 16 Application:

3 (flow control, threaded connection, bronze)
both ports female thread according to EN 10226, PN 25 heating zones) with closed circuits, for
operation with non-aggressive, harmless fluids
DN 40 1.5 - 7.5 m/h 1146112 (e. g. water or suitable water and glycol
DN 50 2.5 - 10.0 m/h 1146116 mixtures according to VDI 2035/NORM
DN 50 3.5 - 14 m/h 1143116* 5195).
Max operating pressure ps : 16 bar (PN 16),

232 psi
or 25 bar (PN 25), 362.5 psi
Male thread:
both ports male thread, PN 16 DN 40: Connection G 1, flat sealing
DN 50: Connection G 2, flat sealing
DN 40 1.5 - 7.5 m/h 1146172
DN 50 2.5 - 10.0 m/h 1146174
Function:
Oventrop pressure independent control valves
"Cocon QTR/QFC" control the flow rate with
the help of actuators. The maximum flow is set
to the required nominal value and is constantly
maintained within the necessary proportional
"Cocon QFC" Pressure independent control valves PN 16 band.
(flow control, flanged connection, cast iron)
"classic" measuring technique Description "Cocon QTR":
Body made of bronze.
both ports flanged according to EN 1092-2
Description "Cocon QFC" (11461.., 16761..):
DN 40 1.5 - 7.5 m/h 1146149 Body made of cast iron (EN-GJL-250 DIN EN
DN 50 2.0 - 8.0 m/h 1146150 1561)
DN 65 5.0 - 20.0 m/h 1146151
DN 80 7.5 - 30.0 m/h 1146152 Description "Cocon QFC (11466..):
DN 100 12.5 - 50.0 m/h 1146153 Body made of nodular cast iron (EN-GJS-500
DN 125 27.0 - 108.0 m/h 1146154 DIN EN 1563), DN 40 and DN 50 made of cast
DN 150 36.0 - 150.0 m/h 1146155 iron (EN-GJL-250 DIN EN 1561)
DN 200 55.0 - 190.0 m/h 1146156
Actuators: page 3.91
High-flow model
DN 125 1143154* information":
DN 150 1143155*
both ports flanged with hole circle according to ANSI
DN 40 1.5 - 7.5 m/h 1676149

DN 50 2.0 - 8.0 m/h 1676150
DN 65 5.0 - 20.0 m/h 1676151
DN 80 7.5 - 30.0 m/h 1676152
DN 100 12.5 - 50.0 m/h 1676153
DN 125 27.0 - 108.0 m/h 1676154
DN 150 36.0 - 150.0 m/h 1676155
DN 200 55.0 - 190.0 m/h 1676156

Hydronic balancing in heating "Cocon QFC" Pressure independent control valves PN 25
and cooling systems "Cocon QGC" Pressure independent control valves PN 16
Control
range
"Cocon QFC" Pressure independent control valves PN 25

3
DN 40 1.5 - 7.5 m/h 1146649

DN 50 2.0 - 8.0 m/h 1146650
DN 65 5.0 - 20.0 m/h 1146651
DN 80 7.5 - 30.0 m/h 1146652
DN 100 12.5 - 50.0 m/h 1146653
DN 125 27.0 - 108.0 m/h 1146654
DN 150 36.0 - 150.0 m/h 1146655
DN 200 55.0 - 190.0 m/h 1146656
"Cocon QGC" Pressure independent control valves PN 16

both ports groove connection for couplings
DN 65 5.0 - 20.0 m/h 1676251

DN 80 7.5 - 30.0 m/h 1676252
DN 100 12.5 - 50.0 m/h 1676253
2017 3.57
Hydronic balancing in heating Accessories for "Cocon QTZ" PN 25 and "Cocon 2TZ"
and cooling systems Accessories for "Cocon QTZ" PN 16 and "Cocon QTR"
Packing
unit
Accessories for "Cocon QTZ" PN 25 and "Cocon 2TZ"

3 Tailpipe sets, flat sealing/tapered sealing,
with collar nut and O-ring
Set = 2 female threaded tailpipes DN 15 and DN 20 with tapered sealing.
Rp for valve DN 15 (10) 1141292*

Rp for valve DN 20 (10) 1141293*
Rp 1 for valve DN 25 (10) 1141294*
Rp 1 for valve DN 32 (5) 1141295*
Set = 2 male threaded tailpipes DN 15 and DN 20 with tapered sealing.
R for valve DN 10 (10) 1140281*

R for valve DN 15 (10) 1140282
R for valve DN 20 (10) 1140284
R 1 for valve DN 25 (10) 1140285*
R 1 for valve DN 32 (5) 1140286*
Accessories for "Cocon QTZ" PN 16 and "Cocon QTR"

Tailpipe sets, flat sealing
with collar nut and ring gasket
Set = 2 weldable tailpipes DN 15 and DN 20:

Supplied with insert (change-over from tapered
for valve DN 10 (10) 1140591 to flat sealing).
for valve DN 15 (10) 1140592
for valve DN 20 (10) 1140593
for valve DN 25 (10) 1140594
for valve DN 32 (5) 1140595
for valve DN 40 (5) 1140596
for valve DN 50 (5) 1140597
Set = 2 solder tailpipes
18 mm for valve DN 15 (10) 1140691

15 mm for valve DN 15 (10) 1140692
18 mm for valve DN 20 (10) 1140693
22 mm for valve DN 20 (10) 1140694
28 mm for valve DN 25 (10) 1140695
35 mm for valve DN 32 (5) 1140696
42 mm for valve DN 40 (5) 1140697
54 mm for valve DN 50 (5) 1140698
Set = 2 male threaded tailpipes
R for valve DN 10 (10) 1140791

R for valve DN 15 (10) 1140792
R for valve DN 20 (10) 1140793
R 1 for valve DN 25 (10) 1140794
R 1 for valve DN 32 (5) 1140795
R 1 for valve DN 40 (5) 1140796
R 2 for valve DN 50 (5) 1140797
Set = 2 female threaded tailpipes
Rp for valve DN 15 (10) 1140892

Rp for valve DN 20 (10) 1140893
Rp 1 for valve DN 25 (10) 1140894
Rp 1 for valve DN 32 (5) 1140895
Tailpipe sets: Pages 3.60, 3.65


and cooling systems Accessories for "Cocon QTR" and "Cocon QFC"
Packing
unit
Insulation shells for "Cocon QTZ" PN 16 Insulation, consisting of two shells.
DN 15 - DN 20 1149104
For heating and cooling systems.
Meet the requirements of the German Energy
3
DN 20 1149106 Saving Directive (EnEV) according to appendix
(model: 180 - 1300 l/h) 5, table 1, line 5.
DN 25 - DN 32 1149108 Operating temperature ts: -10 C up to +120 C
Cold insulation:
Insert (100) 1650793 For "Cocon QTZ" DN 20 with male threaded

connection G 1.
Suitable for flat sealing tailpipes.
Adapter for "Cocon QTZ"
For the conversion of the rotary (25) 1149095

movement of the actuator (90) into
a stroke lift required for the valve
Is required if the "Cocon QTZ" valves shall be

Adapter with stem (10) 1149190 equipped with insulation shells and actuators.
for "Cocon QTZ", thermostatic valves
Extension = 25 mm
Accessories for "Cocon QTR" and "Cocon QFC" Actuator types:

1149011:
Adapter set for the adaptation of actuators DN 40 - 100 SAX 61.03
of other manufacturers to Oventrop "Cocon QTR/QFC" valves DN 65 - 200 SKC 60
1149021:
Adapter (Siemens) (10) 1149011 DN 65 - 100 ML 7421 A3004
Adapter (Honeywell) (10) 1149021 DN 65 - 100 ML 7420 A6009
Adapter (Johnson Controls) (10) 1149031 DN 125 - 200 ML 7421 B3003
Adapter (Belimo) (10) 1149041 (restricted flow in
combination with DN 150/ 200)
1149031:
DN 65 - 100 VA 7810-GGA-12
DN 125 - 200 VA 1125-GGA-1
1149041:
DN 40 - 200 AV24-MFT
2017 3.59
and cooling systems Tailpipe sets
Packing
unit
Tailpipe sets
3 with tapered sealing, with O-ring,
for "Cocon 2TZ" and "Cocon QTZ"
Solder tailpipe, 2-fold
12 mm DN 15 (10) 1140181
15 mm DN 15 (10) 1140182
18 mm DN 20 (10) 1140183
22 mm DN 20 (10) 1140184
Plug-in tailpipe, 2-fold
10 mm DN 15 (10) 1140380
12 mm DN 15 (10) 1140381
15 mm DN 15 (10) 1140382
18 mm DN 20 (10) 1140383
22 mm DN 20 (10) 1140384
3.60 2017
Hydronic balancing in heating "Cocon 2TZ" Regulating valves PN 10
and cooling systems Measuring devices for "Cocon 2TZ" regulating valves
Packing
unit
"Cocon 2TZ" Regulating valves PN 10 Application:

(two-way valve, threaded connection,
brass resistant to dezincification)
3
"eco" measuring technique heating zones) with closed circuits, for
Components in contact with water are made of brass resistant to operation with non-aggressive, harmless fluids
dezincification (DZR), both ports with mounted pressure test points (e. g. water or suitable water and glycol
and drain valves, with linear flow characteristic line at kvs values mixtures according to VDI 2035/NORM
0.45 and 1.0 5195).
Inlet port: coupling, outlet port: female thread Operating temperature ts: -10 C up to +120 C
DN 15 0.45 (10) 1145004 General information:

DN 15 1.00 (10) 1145104 DN 15: G male threaded connection for
DN 15 1.80 (10) 1145204 compression fittings "Ofix", page 3.45.
With insert item no. 1661100
(page 3.65) suitable for flat sealing
tailpipes.
"classic" measuring technique DN 20: G 1 male threaded connection for

both ports with mounted pressure test points, compression fittings, page 9.31.
with linear flow characteristic line at kvs values 0.45 and 1.0
connection thread M 30 x 1.5 "Cocon 2TZ":
Oventrop regulating valves "Cocon 2TZ"
Inlet port: coupling, outlet port: female thread control the room temperature with the help of
actuators and thermostats. Regarding the
DN 15 0.45 (10) 1145074 measuring procedure, the technical information
DN 15 1.00 (10) 1145174 "Cocon 2TZ" has to be observed.
DN 15 1.80 (10) 1145274
The valves are installed in the return pipe.
both ports male thread Presettable, determination of the flow rate by
measuring the differential pressure via the
DN 15 0.45 (10) 1145371 integrated metering station.
DN 15 1.00 (10) 1145372
DN 15 1.80 (10) 1145373 Modification of the flow rates irrespective of the
the help of the measuring gauges
Tailpipe sets: page 3.60 "OV-DMC 3"/"OV-DMC 2".

Measuring devices for "Cocon 2TZ" regulating valves
with "eco" measuring technique Advantages:
for measurement with presetting
measuring gauge "OV-DMC 2" with draining, filling and isolating facility
measuring
Measuring devices regulating
exact control of the flow rate/differential
Straight pattern (10) 1145099 pressure via the pressure test points
Valve inserts: page 3.19
Angle pattern (10) 1145085 Award:

Interclima Paris
Concours de lInnovation

information":
Accessories: Pages 3.17, 3.62, 3.98

2017 3.61
Hydronic balancing in heating OV-Flex HC Flexible hoses
Packing
unit
OV-Flex HC Flexible hoses Diffusion impeding, flexible hose made of

3 for heating an cooling systems EPDM with outer sleeve made of stainless steel
wire mesh.
one port G collar nut with tapered sealing,
one port plug-in fitting for copper pipe according to EN 1057 Application:
Heating and cooling systems (e. g. for the
for 12 mm copper pipe (100) 1140351 connection of radiant and chilled ceilings) with
for 15 mm copper pipe (100) 1140352 closed circuits, for operation with non-
water and glycol mixtures according to VDI
one port G collar nut, flat sealing, 2035/NORM 5195).
one port plug-in fitting for copper pipe according to EN 1057
for 12 mm copper pipe (100) 1140551 Operating temperature ts: 0 C up to 70 C
for 15 mm copper pipe (100) 1140552
Tapered sealing connection:
Accessories Suitable for "Cocon QTZ/2TZ" with G male
thread.


"FSA" Filling and isolation device Max. operating pressure ps: 16 bar (PN 16)
for chilled ceilings Operating temperature ts: -10 C up to +120 C
DN 15 (10) 1149004 Function:

Filling and isolation device "FSA" for filling,
draining and isolating by turning the handle by
90.
3.62 2017
and cooling systems 3.h "Optibal W6" Six-way ball valve
Page
3.h "Optibal W6" Six-way ball valve 3

Content
"Optibal W6" Six-way ball valve 3.64
Tailpipe sets 3.65
2017 3.63
Hydronic balancing in heating 3.h "Optibal W6" Six-way ball valve
and cooling systems System illustrations
Six-way ball valve with rotary actuator and

thermostatic valves AQ in the supply of the
heating and cooling circuit.
3
Automatic hydronic balancing is carried out by the
thermostatic radiator valves AQ with combined
control and regulating function in any position of
the six-way ball valve during heating and cooling
operation. The infinitely adjustable presetting of the
maximum permissible volume flow can be carried
out separately for both types of operation.
In case of larger volume flows, the pressure
independent control valves Cocon QTZ can be
installed instead of the thermostatic valves AQ.
As the volume flow is constantly maintained in the
terminal unit chilled/radiant ceiling by the valve
combination, the terminal unit is not affected by
differential pressure variations in the heating or
cooling system.
Heating
Cooling
Example:
1 Six-way ball valve, item no. 1132004
2 Rotary actuator, item no. 1132030
3 Thermostatic valve AQ, item no. 1183164
Six-way ball valve with rotary actuator, pressure

independent control valve Cocon QTZ and
stroke actuator in the return of the terminal unit.
CBC
Contrary to the application with the thermostatic
valves AQ in the supply of the heating and
cooling circuit, automatic hydronic balancing is
guaranteed by the pressure independent control
valve Cocon QTZ in the return of the terminal
unit. The different volume flows which are required
for the operating conditions heating/cooling can be
realised with the help of the different characteristic
lines of the actuator and stroke limitations.
Example:
1 Six-way ball valve, item no. 1132004
3 Pressure independent control valve
Cocon QTZ, item no. 1143264
4 Electromotive actuator Aktor M,
item no. 1012705
Heating
Cooling
Six-way ball valves with rotary actuator as change-

over and control ball valve with kvs orifice.
CBC Integration option into a centralised building
control system.
Example:
1 Six-way ball valve, item no. 1132004 with
mounted kvs orifices of set item no. 1132020
Heating
Cooling
3.64 2017
3.h "Optibal W6" Six-way ball valve
Hydronic balancing in heating "Optibal W6" Six-way ball valve
and cooling systems Tailpipe sets
Packing
unit
"Optibal W6" Six-way ball valve Application:

for switching between heating and cooling
in a four-pipe system
Four-pipe heating and cooling systems
for the connection of radiant/chilled
3
ceilings and fan coils.
DN 15, G with inner taper 1132004*
DN 20, G 1 with inner taper 1132006* PN 16
Max. differential pressure: 2 bar
Operating temperature ts: - 10 C* up to
+120C
*free from ice
Body made of dezincification resistant

brass.
Kvs value (without orifice): 4.0
Distance between pipe centres: 50 mm
Connections:
DN 15:
G male thread with cone "Euro"
according to EN 16313
DN 20:
G 1 male thread with taper
Kvs orifice set Kvs orifices for the supply pipes for
with integrated control contour flow limitation.
Kvs values: 0.25/ 0.4/ 0.63/ 1,0/ 1.6 and 2.5 High quality plastic.
The set consists of 2 Kvs orifices. The orifices feature a control contour which
allows for a linear up to equal percentage
1132020* flow control via the rotary actuator.
"Aktor R ST L" Rotary actuator for Oventrop six-way ball valve

Rotary actuator for six-way ball valve, Torque: 5 Nm
24 V, proportional rotary atuator 0 - 10 V Angle of rotation: 90
(or two point via forced control 24 V) With manual setting
with position feedback signal 0 - 10 V
For DN 15 and DN 20 1132030*
Tailpipe sets
with tapered sealing with O-ring
Solder tailpipe, 2-fold
12 mm DN 15 (10) 1140181
15 mm DN 15 (10) 1140182
18 mm DN 20 (10) 1140183
22 mm DN 20 (10) 1140184
10 mm DN 15 (10) 1140380
12 mm DN 15 (10) 1140381
15 mm DN 15 (10) 1140382
18 mm DN 20 (10) 1140383
22 mm DN 20 (10) 1140384
Inserts

connection G 1.


and cooling systems 3.i "Flypass" Connection systems, valves and fittings
Page
3.i "Flypass" Connection systems, valves and fittings 3

Content
"Flypass" System illustration 3.68
"Flypass" Connection sets 3.69
"Flypass 4TZ" Connection fitting 3.72
Valves for combination with the "Flypass 4TZ" 3.72
Accessories 3.74
2017 3.67
Hydronic balancing in heating 3.i "Flypass" Connection systems, valves and fittings
and cooling systems "Flypass" System illustration
System example with Flypass set 1:
Functions Flypass 4TZ, connection fitting/installation example:
Normal operation Bypass operation Isolation Filling and bleeding the

system side
Draining of the system and Draining, bleeding and Filling, bleeding and flushing Isolating and draining the
appliance side and bleeding flushing the system side the appliance side (1) appliance side
and flushing the system side
Functions Flypass 4TZ with accessories (fill and drain ball valve 1060191)
Re-filling, bleeding and Differential pressure Installation example Flypass connection system consisting of:
flushing appliance side (1) (2) measurement (3) Flypass 4TZ and accessories (to be ordered separately)
(1) If required, open all components on the appliance side completely.

(2) Accessory fill and drain valve required
(3) Accessory fill and drain valve as well as measuring system OV-DMC2 or OV-DMPC required
3.68 2017
and cooling systems "Flypass" Connection sets
"Flypass" Connection sets

3
"Flypass set 1"
DN 15 1149450
consisting of:
1x "Flypass 4TZ" 1149504
1x Strainer 1141004
1x "Cocon QTZ" (30 - 210 l/h) 1146064
1x Insert 1661100 (2 pces.)
DN 15 1149550
consisting of
1x Strainer 1141004
1x "Cocon QTZ" (90 - 450 l/h) 1146164
DN 15 1149650
consisting of:
1x Strainer 1141004
1x "Cocon QTZ" (150 - 1050 l/h) 1146264
DN 15 1149553
conisting of:
1x "Flypass 4 TZ" 1149504
1x Strainer 1141004
1x "Cocon QTZ" (30 - 210 l/h)
with mounted metering station 1144564
1x Female threaded tailpipe set 1140892 (2 pces.)
DN 20 1149551
consisting of:
1x Strainer 1141006
1x "Cocon QTZ" (150 - 1050 l/h) 1146066
2x Insert 1650793 (1 pce.)
DN 20 1149651
consisting of:
1x Strainer 1141006
1x "Cocon QTZ" (180 - 1300 l/h) 1146166
DN 20 1149554
consisting of:
1x Strainer 1141006
1x "Cocon QTZ" (180 - 1300 l/h)
with mounted metering station 1144666
DN 25 1149552
consisting of:
1x Strainer 1141006
1x "Cocon QTZ" (300 - 2000 l/h) 1146168
2017 3.69
and cooling systems "Flypass" Connection sets
"Flypass set 2"

3 DN 15 1149560
consisting of:
1x Strainer 1141004
1x "Hydrocontrol VTR" 1060564
DN 15 1149562
consisting of:
1x Strainer 1141004
1x "Hydrocontrol MTR" 1061964
DN 15 1149563
consisting of:
1x Strainer 1141004
DN 20 1149561
consisting of:
1x Strainer 1141006
1x "Hydrocontrol VTR" 1060566
DN 20 1149564
consisting of:
1x Strainer 1141006
3.70 2017
and cooling systems 3.i "Flypass" Connection systems, valves and fittings
Further connection sets
3
Exemplary valve sets: Components: Item no.
DN 15 DN 20
Flypass set 3 1x Flypass 4TZ 1149504 1149506

consisting of Flypass fitting with 1x Strainer 1141004 1141006
strainer and double regulating 1x Hycoflow VTB 1060906 1060908
and commissioning valve with flow Double regulating and
display Hycoflow VTB commissioning valve
with flow display

strainer and regulating valve 1x Hycocon ETZ 1063964 1063966
Hycocon ETZ Regulating valve

consisting of fitting Flypass with 1x Strainer 1141004 1141006
strainer and double regulating and 1x Hycocon VTZ 1061854 1061855
commissioning valve Hycocon VTZ Double regulating
and commissioning
valve
Flypass Set 6 1x Flypass 4TZ 1149504 1149506

strainer and double regulating and 1x Hydrocontrol MTR 10619.. 1061906
commissioning valve Hydrocontrol MTR Double regulating
and commissioning
valve
Flypass Set 7 1x Flypass 4TZ 1149504 1149506

consisting of Flypass fitting with 1x Double nipple 1149070 1149071
double nipple and double regulating 1x Hydrocontrol MTR 10619.. 1061906
and commissioning valve Double regulating
Hydrocontrol MTR and commissioning
valve
2017 3.71
Hydronic balancing in heating "Flypass 4TZ" Connection fitting
and cooling systems Valves for combination with the "Flypass 4TZ"
Control Packing
range unit
"Flypass 4TZ" Connection fitting Application:

3 PN 16 Central heating and cooling systems (like fan
one port female thread, modules, induction air systems, cooling and
one port collar nut heating zones) with closed circuits, for
(flat sealing with enclosed ring gasket) operation with non-aggressive, harmless fluids
(e.g. water or suitable water and glycol
DN 15 22.00 1149504 mixtures according to VDI 2035/NORM
DN 20 34.00 1149506 5195).
Operating temperature ts: -10 C up to 120 C
Function:
The Oventrop connection fitting "Flypass 4TZ"
is used for the isolation, flushing, draining and
bleeding of the supply and return pipe installed
in the flow direction in front of the fitting or the
succeeding sections of the system. The
connection fitting can be converted to bypass
operation. The ball positions and thus the flow
directions are displayed by the shape of the
handle.
Valves for combination with the "Flypass 4TZ" On principle, all flat sealing Oventrop valves
in corresponding size with male thread
Strainer PN 25 (DN 15) or male thread 1 (DN 20) can be
both ports male thread, flat sealing combined with the connection fitting
with double wire basket 250 m "Flypass 4TZ".
The adapter 1149075/76 is required
DN 15 2.70 (10) 1141004 when using female threaded valves.
DN 20 4.80 (10) 1141006
"Cocon QTZ" Pressure independent control valve PN 16 "Cocon QTZ"

both ports with connections for "classic" measuring technique compression fittings "Ofix", pages 1.140,
(closed with blind plugs) 1.141 and 1.143.
both ports male thread With insert item no. 1661100 (page 3.74)
DN 15 30 - 210 l/h (10) 1145564
DN 15 90 - 450 l/h (10) 1145664 DN 20: G 1 male threaded connection for
DN 15 150 - 1050 l/h (10) 1145764 compression fittings, page 9.31.
DN 20 180 - 1300 l/h (10) 1145666 suitable for flat sealing tailpipes.

DN 15 30 - 210 l/h (10) 1146064

DN 15 90 - 450 l/h (10) 1146164
DN 15 150 - 1050 l/h (10) 1146264
DN 20 150 - 1050 l/h (10) 1146066
DN 20 180 - 1300 l/h (10) 1146166
"Hydrocontrol VTR"
Bronze double regulating and commissioning valves PN 16
DN 15 3.88 (10) 1060564

DN 20 5.71 (10) 1060566
Spare parts for strainers: Page 5.34

"Unofix" Refurbishment of one pipe heating systems Page 1.98
Tailpipe sets:

Hydronic balancing in heating "Flypass 4TZ" Connection fitting
and cooling systems Valves for combination with the "Flypass 4TZ"
Control Packing
range unit
"Hydrocontrol MTR" with integrated metering station

3
DN 15 LF 0.55 (10) 1061964
DN 15 MF 1.15 (10) 1061934
DN 15 HF 2.10 (10) 1061904
DN 20 3.70 (10) 1061906
2017 3.73
Control- Packing
range unit
"Hycocon VTZ"
3 Double regulating and commissioning valves PN 16
DN 15 1.70 (10) 1061854

DN 20 2.70 (10) 1061856
"Hycoflow VTB"
Double regulating and commissioning
valves with flow display PN 10
DN 20 4 - 17 l/min 3.00 (10) 1060906

DN 25 10 - 40 l/min 8.30 (10) 1060908
"Hycocon ETZ" Regulating valves PN 16
DN 15 0.90 (10) 1063964

DN 20 0.90 (10) 1063966
"Hycocon HTZ" Regulating valves PN 16
DN 15 1.70 (10) 1064264

DN 20 2.70 (10) 1064266
DN 20 5.00 (10) 1064267
Accessories
Adapter For the connection of female threaded valves

one port male thread (valve connection), to the connection fitting "Flypass 4TZ". The
one port male thread, flat sealing adapter has to be screwed into the female
threaded connection of the valve.
DN 15 (10) 1149075
DN 20 (10) 1149076
Double nipple For the direct connection of flat sealing pipes

both ports male thread, flat sealing or valves with collar nut to the connection
fitting "Flypass 4TZ" .
DN 15 (10) 1149070 Both ports male thread.
DN 20 (10) 1149071

connection G 1.


Tailpipe sets:
3.74 2017
Packing
unit
Insulation shell made of polyurethane Insulation, consisting of two shells.

rigid foam with polystyrene shell
for connection sets "Flypass"
For heating and cooling systems.
Meet the requirements of the German
3
Energy Saving Directive (EnEV) according
DN 15 - DN 20 (LF) 1149581 to appendix 5, table 1, line 5.
4102.
Cold insulation:
Suitable for "Flypass set 1" (except for

item no. 1149651, 1149552, 1149553,
1149554 and 1149564) and "Flypass
sets 3 - 7".
Is required if the "Cocon QTZ" valves shall be

Adapter with stem (10) 1149190 equipped with insulation shells and actuators.
for "Cocon QTZ", thermostatic valves
Extension = 25 mm
2017 3.75
Hydronic balancing in heating 3.j "Tri-M", "Tri-D", "Tri-CTR"
and cooling systems Two-way valves, three-way valves, temperature controllers
Page
3.j "Tri-M", "Tri-D", "Tri-CTR" 3

I
OV
II Content
III
"Tri-M plus TR" Four-port mixing valves PN 10 3.78

"Tri-D plus TB" Three-way diverting valve PN 16 3.78
"Tri-D TB" Three-way diverting valve PN 16 3.78
"Combi LR" Radiator lockshield valves 3.81
2017 3.77
"Tri-M plus TR" Four-port mixing valves PN 10
Hydronic balancing in heating "Tri-D plus TB" Three-way diverting valve PN 16
and cooling systems "Tri-D TB" Three-way diverting valve PN 16
Packing
unit
"Tri-M plus TR" Four-port mixing valves PN 10 Application:

3 with integrated T-piece
(mixing valve, threaded connection, bronze)
G male thread, flat sealing operation with non-aggressive, harmless fluids
(e. g. water or suitable water and glycol
DN 15 0.45 (10) 1142751 mixtures according to VDI 2035/NORM
DN 15 1.00 (10) 1142752 5195).
DN 15 1.80 (10) 1142753
"Tri-D plus TB" Three-way diverting valve PN 16
with screwed T-piece "Tri-M plus TR":
(diverting valve, threaded connection, brass) Function:
The Oventrop four-port mixing valves "Tri-M
tapered sealing plus TR" control the room temperature by
connection thread M 30 x 1.5 changing the volume flow to the terminal unit
G male thread, tapered connection by use of actuators whilst maintaining an
almost constant volume flow within the
distribution circuit.
DN 15 2.50 (10) 1142604
Description "Tri-M plus TR":
"Tri-D TB" Three-way diverting valve PN 16 Body made of bronze, seals made of EPDM or
(diverting valve, threaded connection, brass) PTFE, bonnet made of brass resistant to
dezincification (DZR), valve stem made of
tapered sealing stainless steel with double seal.
G male thread, tapered connection "Tri-D plus TB":
DN 15 2.50 (10) 1142504 Function:

The Oventrop three-way diverting valve "Tri-D
Tailpipe sets (for item no.1142504) with tapered sealing, plus TB" with T-piece controls the room
with O-ring temperature with the help of actuators by
Solder tailpipe 3-fold diverting or changing-over the volume flow.
12 mm (10) 1140191 Description:

15 mm (10) 1140192 Body and bonnet made of brass, seal made of
EPDM, valve stem made of stainless steel with
Threaded tailpipe, 3-fold double seal.
DN 15 (10) 1140292 G 3/4 male threaded connection for

compression fitting "Ofix", pages 1.140, 1.141
and 1.143.
With insert item no.1661100 (page1.125 )
10 mm (10) 1140390 suitable for flat sealing tailpipes.
12 mm (10) 1140391
15 mm (10) 1140392 Isolating fittings:
Item no. 1016166/68: page 1.121
T-piece (10) 1142561
"Tri-D TB":
OV Same as "Tri-D plus TB", but three-way
diverting valve and T-piece as single
component.
Award:
light + building
Frankfurt
Combination possibilities of valves and actuators Page 3.08

Hydronic balancing in heating "Tri-M TR" Three-way mixing valves PN 16
and cooling systems "Tri-CTR" Three-way diverting and mixing valves PN 16
Packing
unit

(diverting valve, threaded connection, bronze) Central heating and cooling systems with
closed circuits, for operatoin with non-
3
connection thread M 30 x 1.5 aggressive, harmless fluids (e. g. water or
with collar nuts, flat sealing suitable water and glycol mixtures according
to VDI 2035/NORM 5195).
DN 25 6.50 1130208 Operating temperature ts: 0 C up to 120 C
DN 40 9.50 1130212 Diverting or changing-over ("Tri-D TR") or
I
OV
II mixing ("Tri-M TR") of volume flows in heating
III and cooling systems in combination with
thermostatic or electric actuators.
Application, for instance for storage cylinder

loading function or heating installations with
two heat generators, for instance in solar plants
"Tri-M TR" Three-way mixing valves PN 16 or heat pump systems (bivalent heating
(mixing valve, threaded connection, bronze) systems).
connection thread M 30 x 1.5 Male thread:

with collar nuts, flat sealing DN 20: G 1
DN 25: G 1
DN 20 4.50 1131706 DN 40: G 2
DN 25 6.50 1131708
OV
DN 40 9.50 1131712 The valves can be used in combination with
AB A
Oventrop temperature controllers or actuators.
B
"Tri-D TR":
"Tri-CTR" Three-way diverting and mixing valves PN 16
(three-way valve, threaded connection, bronze)

DN 15 (10) 1131204 "Tri-M TR":

DN 20 (10) 1131206
DN 25 (10) 1131208
DN 32 (5) 1131210
DN 40 (5) 1131212
DN 50 (5) 1131216
Item no. kvs p max.

113 02/07/17 06 4.5 0.75 bar
113 02/07/17 08 6.5 0.5 bar
113 02/07/17 12 9.5 0.2 bar
"Tri-CTR":
Function:
For use as diverting valve, the three-way valve
(A and B). Depending on the position of the
valve disc, the direction of flow is diverted from
For use as mixing valve, the three-way valve
has two inlet ports (A and B) and one outlet
port (AB). Depending on the position of the
valve disc, the cold and hot water is mixed.
The three-way valves "Tri-CTR" can be used


Hydronic balancing in heating Two-way valves, three-way valves, temperature controllers
and cooling systems Accessories sets for three-way valves"Tri-D TR", "Tri-M TR" and "Tri-CTR"
Packing
unit
Accessories sets for three-way valves"Tri-D TR", "Tri-M TR" and

3 "Tri-CTR"
Weldables tailpipe 3-fold
for valve DN 15 (10) 1130091

for valve DN 20 (10) 1130093
for valve DN 25 (10) 1130094
for valve DN 32 (5) 1130095
for valve DN 40 (5) 1130096
for valve DN 50 (5) 1130098
Solder tailpipes 3-fold
15 mm for valve DN 15 (10) 1130191

15 mm for valve DN 20 (10) 1130192
18 mm for valve DN 20 (10) 1130193
22 mm for valve DN 20 (10) 1130194
28 mm for valve DN 25 (10) 1130195
35 mm for valve DN 32 (5) 1130199
35 mm for valve DN 40 (5) 1130196
42 mm for valve DN 40 (5) 1130197
54 mm for valve DN 50 (5) 1130198
Threaded tailpipes 3-fold
R for valve DN 15 (10) 1130291

R for valve DN 20 (10) 1130292
R for valve DN 20 (10) 1130293
R 1 for valve DN 25 (10) 1130294
R 1 for valve DN 32 (5) 1130299
R 1 for valve DN 40 (5) 1130295
R 1 for valve DN 40 (5) 1130296
R 2 for valve DN 50 (5) 1130298
3.80 2017
Temperature controllers
Hydronic balancing in heating "Combi LR" Radiator lockshield valves
and cooling systems Two-way valve PN 16
kv Packing
s unit
Temperature controllers Application:

Temperature controller with immersion sensor
Water, max. sensor temperature 30 K above
the set value.
3
Immersion pocket G connection For industrial installations, water heaters, air
heaters, hot cabinets, dish-washers, surface
Control range Capillary length heating systems or similar.
The control range can be limited or locked.
20 - 50 C 2m 1140561
40 - 70 C 2m 1140562 For further information see
50 - 80 C 2m 1140563 "Technical information":
70 - 100 C 2m 1140564
20 - 50 C 5m 1140571
40 - 70 C 5m 1140572
70 - 100 C 5m 1140574
Immersion pocket only 1141091
Temperature controller with contact sensor and heat transfer unit
Control range Capillary length

5 4 3
oventrop
20 - 50 C 2m 1142861
30 - 60 C 2m 1142862
40 - 70 C 2m 1142863
50 - 80 C 2m 1142864
"Combi LR" Radiator lockshield valves Acts as throttling valve in combination with the
Presetting, isolating temperature controller to limit the flow
brass, nickel plated temperature of surface heating installations.
Selection of valves:
Straight pattern up to 85 m DN 15 straight DN 20 "Combi LR"
up to 120 m DN 20 straight DN 25 "Combi LR"
10 DN 1.80 (25) 1027662
15 DN 1.80 (25) 1027664
20 DN 2.40 (10) 1027666
25 DN 3.20 (10) 1027668
Two-way valve PN 16 Application:

(can also be used as three-way valve) Central heating and cooling systems with
Flanged connections AB, A and B according to DIN EN 1092-2 aggressive, harmless fluids (e.g. water or
DN 15 1.00 1130875 VDI 2035/NORM 5195).
DN 15 1.60 1130865
DN 15 2.50 1130845 Description:
DN 25 10.00 1130847 Body made of cast iron, disc made of brass
DN 32 16.00 1130848 and stem made of stainless steel.
DN 40 25.00 1130849 DN 15 up to DN 50 metal to metal seal
DN 50 35.00 1130850 between disc and seat.
DN 65 63.00 1130851 DN 65 up to DN 150 soft sealing with EPDM
DN 80 100.00 1130852 seal between disc and seat.
DN 100 160.00 1130853 The central nipple is closed with a cap. The
DN 125 220.00 1130854 valve can be used as three-way valve after
DN 150 320.00 1130855 removal of the cap.
2017 3.81
Hydronic balancing in heating Two-way valves, three-way valves, temperature controllers
and cooling systems Two-way valve PN 16
Two-way valve PN 16 Application:

3 Central heating and cooling systems with
Flanged connections AB and A with hole circle according to ANSI*
aggressive, harmless fluids (e.g. water
DN 65 63.00 1670851 or suitable water and glycol mixtures
DN 80 100.00 1670852 according to VDI 2035/NORM 5195).
DN 100 160.00 1670853
DN 125 220.00 1670854 Description:
Body made of cast iron, disc made of brass
and stem made of stainless steel.
DN 15 up to DN 50 metal to metal seal
between disc and seat.
DN 65 up to DN 150 soft sealing with EPDM
seal between disc and seat.
The central nipple is closed with a blind flange
(flanged connection according to DIN).
*US-American standard.
3.82 2017
and cooling systems 3.k "KTB" Thermostatic valves for cooling systems
Page
3.k "KTB" Thermostatic valves for cooling systems 3

Content
Thermostatic valves "KTB" 3.84
Thermostats for thermostatic valves "KTB" 3.84
2017 3.83
3.k "KTB" Thermostatic valves for cooling systems
Hydronic balancing in heating Thermostatic valves "KTB"
and cooling systems Thermostats for thermostatic valves "KTB"
kv kv
Packing
unit
P-dev. P-dev.
Thermostatic valves "KTB" Valves for thermostats

3 (cooling, threaded connection, brass)
with reversed closing function
Angle pattern valve Application:

Cooling systems (like fan convectors (fan coil
DN 15 0.25 0.50 1.00 (25) 1141704 units), chilled ceiling modules, induction air
DN 20 0.25 0.50 1.00 (25) 1141706 systems, cooling zones) with closed circuits,
DN 25 0.25 0.50 1.00 (10) 1141708 for operation with non-aggressive, harmless
fluids (e. g. water or suitable water and glycol
Straight pattern valve 5195).
DN 15 0.25 0.50 1.00 (25) 1141804 Max. operating pressure ps: 10 bar PN 10
DN 20 0.25 0.50 1.00 (25) 1141806 Max. differential pressure: 0.5 bar
DN 25 0.25 0.50 1.00 (10) 1141808 Operating temperature ts: 20 C up to +120 C
Reversed angle pattern valve Valve opens with the temperature at the sensor
rising.
DN 15 0.25 0.50 1.00 (25) 1141904 Marking of the glands of the valve inserts: "K".
DN 20 0.25 0.50 1.00 (25) 1141906 The valves can be used in combination with the
thermostats "Uni XH", "Uni LH", "vindo TH"
and "Uni SH", page 1.08.
Thermostatic valves "KTB" (100) 1147169
Valve inserts
Thermostats for thermostatic valves "KTB"

Temperature range 7 - 28 C
Thermostat "Uni LH"
Thermostat with remote sensor
white
white,
with remote sensor

capillary 5 m long (75) 1011666
capillary 10 m long (75) 1011667
capillary 2 m long (75) 1011682 without '0' setting
Thermostat with remote control "Uni FH"

2
3 4 white
5
1
0
white,
2
3 4
capillary 5 m long 1012396 For further information see
5
1
3.84 2017
and cooling systems 3.l Room thermostats, actuators
Page
3.l Room thermostats, actuators 3

Content
Room thermostats 3.86
"Sensor GA FD" Dew point control 3.88
"Aktor MH CON B" (ENOCEAN) 3.92
2017 3.85
Hydronic balancing in heating 3.l Room thermostats, actuators
and cooling systems Room thermostats
Packing
unit
Room thermostats
3
1012705/06, page 1.28 (may also be
Room thermostat - surface mounting (heating and cooling) The room thermostat does not only feature
Heating 0 - 10 V control analogue outlets 0-10 V for heating and
Cooling 0 - 10 V control cooling, but also a 3-stage ventilator switch
with fan drive (24 V - 240 V) for the activation of fan
convectors (fan coil units).
24 V (25) 1152153 The room thermostat is used for individual
room temperature control in combination with
the electrothermal actuator (0-10 V) "Aktor T
ST L NC", item no. 1012953, page 1.27 or the
electromotive actuator "Aktor M ST L", item no.
1012705/06, page 1. 00 (may also be used in
three- or four-pipe systems).
Heating two point control for individual room temperature control of
heating systems in combination with the
with daily setting electrothermal actuators (two point)
"Aktor T 2P". Output signal pulse-width
230 V (78) 1152551 modulation.
with weekly setting Heating:
230 V (78) 1152552 closed with current off.
24 V 1152554 Central temperature setback is carried out
230 V (25) 1152051 "Aktor T 2P".
Heating:
for 24 V).
Cooling:

limiting elements.
3.86 2017
Packing
unit

Heating two point control 3
230 V (128) 1152071
24 V (128) 1152072
230 V (40) 1152561
100 up to 230 V AC
Heating:
Room thermostat - surface mounting (heating or cooling) The room thermostat is used for heating or
Heating two point control cooling in combination with electrothermal
Cooling two point control actuators (two point) "Aktor T 2P" and fan
with fan drive convectors (fan coil units).
The room temperature is maintained at the
230 V 1152351 chosen level. With switch for Heating-Off-
Cooling and fan switch.
Heating/cooling:
closed with current off.

Room thermostat - surface mounting (heating or cooling) With LCD display and adjustable timed
Cooling two point control Temperature range: 5 C up to 35 C
with fan drive Heating or cooling:
closed with current "off".
230 V 1152451 For further information see
24 V 1152452 "Technical information":

Room thermostat - surface mounting (heating and cooling) Electronic room thermostat with digital display
3 with display
for ventilation systems with heating and cooling
function.
Cooling 0 - 10 V control
with fan drive
24 V 1152065
Room thermostat - surface mounting (heating or cooling)

with display
Heating or cooling 0 - 10 V control
with fan drive
24 V 1152064
"Sensor GA FD" Dew point control
"Sensor GA FD" Dew point control 24 V Is required in combination with room

thermostats to protect chilled ceilings against
with alternating contact 1141951 condensation.
An actuator interrupting the cooling water flow
is for instance activated in combination with
the "Regufloor HC".
Connection to the cooling water supply.
3.88 2017
and cooling systems "Aktor T" Electrothermal actuators
Packing
unit
actuators serve to control the room
3
"Aktor T 2P" Electrothermal actuators (two point)
"H NC", closed with current "off", 230 V 1012415 integrated distributor, radiant ceiling panels,
"H NO", open with current "off", 230 V 1012425 chilled ceiling systems and induction air
"L NC", closed with current "off", 24 V 1012416 systems in combination with two point room
"L NO", open with current "off", 24 V 1012426 thermostats.
"H NC", closed with current "off", 230 V 1012435 Further applications in bivalent heating
with mounted auxiliary switch installations.
"L NC", closed with current "off", 24 V 1012442 Connecting cable 1 m.
cable 2 m long With "First-Open" function and stroke index.
"H NC", closed with current "off", 230 V 1012452 Simple plug-in connection with valve adapter.
cable 2 m long Actuators can be installed in any position.
"H NC", closed with current "off", 230 V 1012455 Due to their construction, the electrothermal
cable 5 m long actuators are secured against overvoltage
"H NC", closed with current "off", 230 V 1012459 which could occur when switching on neon
cable 10 long tubes. A varistor is thus not necessary.
"M NC", closed with current "off", 120 V 1012420#
only in approved countries outside the EU
Valve adapter
The high model is required when using the

high model (5) 1012462 actuators, item no. 10124.. and 1012953,
connection thread M 30 x 1.5 in combination with the regulating valves
"Hycocon ETZ/HTZ" as well as the fittings
"Multiblock T/TU/TFU/TQ" and the design
cover (11 mm higher than standard).
2017 3.89
and cooling systems "Aktor M" Electromotive actuators
Packing
unit
Description electromotive actuators 0 - 10 V:

3 "Aktor M" Electromotive actuators The actuators can be used in centralised
building control systems in combination with
with manual setting, adjustable mode of operation the electronic room thermostat, item no.
1152151, or with a central controller.
"ST L", 24 V, modulating proportional 1012705 Connecting cable 1.5 m.
actuator, 0-10 V, With stroke index.
automatic anti-blocking function and
recognition of neutral point, Description electromotive actuators (10127..):
multiple characteristic lines adjustable Connecting cable 1.5 m.
as item no. 1012705, 1012735* The valve is completely opened and closed
but for "Cocon QTZ" PN 25 every 24 hours.
"ST L", 24 V, modulating proportional 1012706

actuator, 0-10 V, with position feedback,
recognition of neutral point,
mutiple characterstic lines adjustable
as item no. 1012706, 1012736*

but for "Cocon QTZ" PN 25
"3P L", 24 V, three point actuator, 1012708


without anti-blocking function, In case of emergency function, the actuator
mode of operation not adjustable returns to zero position if the power supply is
interrupted.
"ST L NC", 24 V 1012717

modulating proportional actuator,
0 - 10 V, with electric emergency function and
automatic recognition of neutral point
"3P H", 230 V, (10) 1012703

three point actuator,

1012711
"2P L", 24 V, two point actuator,
In case of emergency function, the actuator

"2P H NC", 230 V, two point actuator, 1012715 returns to zero position if the power supply is
with emergency function interrupted.
"2P L NC", 24 V, two point actuator, 1012716


and cooling systems "Aktor M" Electromotive actuators
"Aktor M" Electromotive actuators

squeeze connection, 24 V 3
Steady control with 0-10 V or switching as two or three point control.
Type of characteristic line (linear, equal percentage) adjustable.
With position feedback signal 0-10 V.
"ST/ 2P/ 3P L", 10 mm piston stroke, 1158010 For "Cocon QTR/QFC" DN 40 and DN 50.
with adapter
"ST/ 2P/ 3P L", 10 mm piston stroke, 1158011 For two-way valves 11308.. and 16708..
without adapter DN 15 up to DN 50.
Steady control with 0(2) - 10 V or switching as three point control. For "Cocon QTR/QFC" DN 40 up to DN 100.
Linear characteristic line.
With position feedback signal 0-10 V.
"ST/ 3P L", 20 mm piston stroke, 1158020

with adapter
Steady control with 0(2) - 10 V or 0(4) - 20 mA or For "Cocon QTR/QFC" DN 40 up to DN 100.

switching as two or three point control.
Linear characteristic line.
With position feedback signal 0 - 10 V.
"ST/ 3P L", 20 mm piston stroke, 1158021 Valves opening with current "off".
with spring return and adapter
"ST/ 2P/ 3P L", 20 mm piston stroke, 1158022 Valves closing with current "off".
Steady control with 0 - 10 V or 4 - 20 mA or For "Cocon QFC" DN 125 up to DN 200

switching as two or three point control. as well as two-way valves, item no.
Type of characteristic line (linear, square-law, equal percentage) 11308.. and 16708.. DN 65 up to DN 150.
adjustable.
With position feedback signal 0 - 10 V.
"ST/ 2P/ 3P L", 40 mm piston stroke, 1158030

with adapter
"ST/ 2P/ 3P L", 40 mm piston stroke, 1158031 Valves opening with current "off".
"ST/ 2P/ 3P L", 40 mm piston stroke, 1158032 Valves closing with current "off".
Connection module 230 V 1158033 For the connection of the 24 V actuators

"Aktor M", item no. 1158030/ 31/ 32, to
the 230 V supply voltage.
Module for plug-in connection to the actuator.
2017 3.91
3.l Room thermostats, actuators
"Aktor M ST EIB" Electromotive actuators
Hydronic balancing in heating "Aktor M ST LON" Electromotive actuators
and cooling systems "Aktor MH CON B" (ENOCEAN)
"Aktor M ST EIB" Electromotive actuators Description EIB/LON:

3 system "EIB"
with integrated bus coupling
The electromotive actuator EIB is suitable for a
direct connection to the European installation
connection thread M 30 x 1.5 bus control system. The power absorption is
extremely low, so that a separate power supply
"Uni EIB H" is not needed. Moreover, the actuator is
equipped with one or two integrated binary
with one binary entry 1156065 entries to which a window contact may for
with two binary entries 1156066 instance be connected. The connection of the
bus and the binary entries is made via a 4- or a
6-core cable (1 m).
"Aktor M ST LON" Electromotive actuators The electromotive actuator LON is suitable for
system "LON" a direct connection to the LonWorks
with integrated bus coupling networks. The power absorption is extremely
connection thread M 30 x 1.5 low, so that a separate power supply is not
needed when using the Link-Power-
"OV LON H" Technology. Moreover, the actuator is
equipped with an integrated binary entry to
with one binary entry 1157065 which a window contact may for instance be
connected. The connection of the bus and the
Product data bank "KNX/EIB" and 1156051 binary entry is made via a 4-core cable (1 m).
application programmes "LON" 3.5" diskette with Oventrop specific data to be
read in the ETS data banks or the LonTalk-
Software.
The data to be read in the ETS data banks or
the LonTalk-Software can be downloaded
from the internet under www.oventrop.de
(category "Software") free of charge.
"Aktor MH CON B" (ENOCEAN) Electronic actuator for room temperature

control. The actuator supports the EnOcean
connection thread M 30 x 1.5 1150765 profile A5-20-01 and can be connected to
Electronic actuator communication centres/gateways or room
with bi-directional wireless communication, thermostats of other manufacturers.
battery operated
Only functions in combination with communication The actuator is not compatible with the
centres/gateways and room thermostats using the EEP gateway "Synet CR" and the wireless
(EnOcean Equipment Profile) A5-20-01. thermostats "R-Tronic".
The Oventrop actuators can e.g. be

System Oventrop actuators Item no.
used with the following bus systems:
Uni EIB H GIRA Instabus KNX/EIB

with one binary entry 1156065 ABB i-bus KNX
with two binary entries 1156066 Busch-Jger installation bus
Jung KNX-System
KNX/EIB
Uni EIB D Merten KNX
with one binary entry 1156075 Siemens GAMMA instabus
with two binary entries 1156076 Woertz Building Control Systems
and others
OVLONH Gesytec
with one binary entry 1157065 SVEA Building Control Systems
Echelon
OVLOND ELKA Electronics
LON
with one binary entry 1157075 Kieback & Peter
t.a.c. TAC Vista
Regulex
and others
EnOcean Aktor MH CON B iEXERGY (wibutler)

(wireless) (ENOCEAN) 1150765
and others
with wireless module
3.92 2017
and cooling systems 3.m "OV-DMC 3", OV-DMC 2" and "OV-DMCP" Measuring systems
Page
3.m "OV-DMC 3", OV-DMC 2" and "OV-DMCP" Measuring systems 3

Content
"OV-DMC 3" 3.94
"OV-DMC 2", "OV-DMPC" Accessories 3.95
"OV-DMPC" Measuring system 3.96
"OV-Connect" Differential pressure transmitter 3.97
"classic" measuring technique 3.98
Accessories "eco" measuring technique 3.98
2017 3.93
Hydronic balancing in heating 3.m "OV-DMC 3", OV-DMC 2" and "OV-DMCP" Measuring systems
and cooling systems "OV-DMC 3"
"OV-DMC 3" Application:

3 for measurement, transfer and determination of
pressure, flow, temperature and performance data
The measuring system "OV-DMC 3" can be
used in combination with Oventrop products
with "classic" or "eco" measuring technique
without display device 1069278 (e.g. "Hycocon", "Hydrocontrol" and "Cocon"
with display device 1069279 valves as well as Oventrop metering stations).
Description "OV-DMC 3":

The measuring system "OV-DMC 3" has
especially been designed for the regulation of
heating and cooling systems.
The interfaces for communication with
standard smartphones, tablets and personal
Applications of "OV-DMC 3": computers enable an easy regulation of heating
and cooling systems as well as a simple
generation of measured records.
The data obtained via the calculation
programmes "OVplan" and "OVselect" can be
accessed retrospectively.
Measuring system "OV-DMC 3" for differential
pressure measurement and the resulting
determination of the flow rate.
Calculation of the presetting for a double
regulating and commissioning valve is possible
after having entered the valve data and the
required nominal flow rate. The permanent
measurement of differential pressure and flow
is possible, too. The measurement of two
temperatures (e.g. supply and return) with the
help of temperature sensors which can be
connected to the "OV-DMC 3" allows for a
direct calculation of the heating capacity.
Connection example "OV-DMC 3":
3.94 2017
3.m "OV-DMC 3", OV-DMC 2" and "OV-DMCP" Measuring systems
Hydronic balancing in heating "OV-DMC 2" Measuring system
and cooling systems "OV-DMC 2", "OV-DMPC" Accessories
Packing
unit
"OV-DMC 2" Measuring system Application:

The measuring system "OV-DMC 2" can be 3
1069177 used in combination with Oventrop products
with differential pressure transmitter "DMC-sensor", with "classic" or "eco" measuring technique
computer (manual appliance) and extensive accessories (e. g. "Hycocon", "Hydrocontrol" and "Cocon"
for the "classic" and "eco" measuring technique valves as well as Oventrop metering stations).
Description "OV-DMC 2":
The measuring system "OV-DMC 2" has
especially been designed for the regulation of
heating and cooling systems.
Measuring system "OV-DMC 2" for differential
pressure measurement and the resulting
determination of the flow rates.
Having entered the valve data and the required
nominal flow rate, calculation of the presetting
for a double regulating and commissioning
valve is possible with the help of the constant
pressure, computer or OV Balance method.
Furthermore, the system offers the kv-value
method, permanent differential pressure
measurement, Data Logging and the
measurement of temperatures by use of the
enclosed temperature sensor. The device
works off-line with rechargeable batteries. In
order to increase the accuracy of the values
obtained during differential pressure
measurement, an adjustment to neutral point is
carried out automatically.
"OV-DMC 2", "OV-DMPC" Accessories
Contact thermometer 1069197
For OV-DMC 2 and OV-DMPC.

Set 16 = 2 measuring hoses (5) 1069178 L = 0.5 m.
Set 14 = 2 measuring hoses (5) 1069179 L = 2 m, red and blue
For replacement purposes for measuring

Set 17 = 2 measuring nipples G (50) 1069186 systems "OV-DMC 2" and "OV-DMPC".
with screen Quick-coupling technic.
Connecting cable for the transmission of data

USB conncting cable (50) 1069299 from the "OV-DMC 2" to the USB interface.
Supplied with software for the data
transmission to the USB stick.

and cooling systems "OV-DMPC" Measuring system
"OV-DMPC" Measuring system Application:

3 The "OV-DMPC" measuring system can be
consisting of 1069277 used in combination with Oventrop products
differential pressure transmitter "DMPC-sensor" with with "classic" or "eco" measuring technique
USB interface and software including extensive (e. g. "Hycocon", "Hydrocontrol" and "Cocon"
accessories for "classic" and "eco" measuring technique valves as well as Oventrop metering stations).
Description OV-DMPC:
The measuring system OV-DMPC is
especially designed for the regulation of
heating and cooling systems and is
equipped with an USB interface for the
connection to a commercial computer.
Together with the software included, it
enables an easy regulating of heating and
cooling systems as well as a simple
generation of measured records. The data
obtained via the calculation programmes
OVplan and OVselect can be accessed
retrospectively.
Measuring system OV-DMPC for

differential pressure measurement and the
resulting determination of the flow rate.
Calculation of the presetting for a double
regulating and commissioning valve is
possible after having entered the valve data
and the required nominal flow rate.
A permanent measurement of differential
pressure and flow is possible, too.
3 The measurement of two temperatures
(e.g. supply and return) with the help of
temperature sensors (not included) which
can be connected to the OV-DMPC
10 sensor, allows a direct calculation of the
7
11 heating capacity.
5
Example: Measurement with measuring

technic classic
Measuring needles
classic
8 13 9 6 12 12 4 (2x) 2 1
red
Extent of supply: 7. Allen key 3 mm
blue
1. Measuring case 8. Allen key 4 mm
2. Differential pressure transmitter 9. Measuring hose blue with quick couplings
DMPC sensor with USB interface 10. Measuring hose red with quick couplings
Measuring hoses
3. 2 connection nipples 106 91 86 for 11. Fixing chain
replacement at differential pressure transmitter 12. 2 measuring adapters 106 02 99 for differential
4. Set of measuring needles 106 17 99 for pressure measurement at Hydromat DTR/DFC OV-DMPC
eco measuring technique of double regulating 13. USB stick with installation software and operating
and commissioning valves, e.g. Hycocon instructions
5. 2 measuring adapters with connection
thread G 34 for quick coupling technique
6. Set of measuring needles 106 91 99 for classic
DMPC sensor USB cable
measuring technique of double regulating and
commissioning valves, e.g. Hydrocontrol

and cooling systems "OV-Connect" Differential pressure transmitter
Packing
unit
"OV-Connect" Differential pressure transmitter The Oventrop "OV-Connect" differential

pressure transmitter permanently controls the
differential pressure of Oventrop products with
3
including measuring needles and (5) 1069180
P2
connecting cable "classic" measuring technique in heating,

cooling and potable water systems which are
P1
operated with water or water and glycol

mixtures. The signals can be processed via an
electric control and monitoring unit.
The differential pressure of the valve is
measured via the measuring needles and
6 mm copper pipes at the pressure test points.
Measuring range: 0 - 1000 mbar
During working conditions, the appliance
provides an output signal proportional to the
measured differential pressure (0 10 V).
Supply voltage 24 V DC
(18 up to 33 V) or 24 VAC 15%
Control and
monitoring
Leit- und unit
berwachungseinheit
P2
P1
0
6
4
2
6
4
2
0

2017 3.97
3.m "OV-DMC 3", OV-DMC 2" and "OV-DMCP" Measuring systems
Hydronic balancing in heating "classic" measuring technique
and cooling systems Accessories "eco" measuring technique
Packing
unit

3 Function:
- differential pressure measurement
Accessories "eco" measuring technique

Measuring adapter with quick-coupling

Measuring adapter (50) 1060297 technic to be screwed onto the fill and
drain tool.


Measuring devices
Straight pattern (10) 1145099
Angle pattern (10) 1145085
3.98 2017
and cooling systems 3.n Products for air conditioning and ventilation
Page
3.n Products for air conditioning and ventilation 3

Content
Products for air conditioning and ventilation 3.100
2017 3.99
Devices,suchase.g.fanconvectors,chilled
ceilings,hotaircurtainsystems,faadeventila-
tiondevices,havetobehydraulicallyintegrated
intoheatingandcoolinginstallations,balanced
3 andregulated.ThefollowingOventropvalves
complywiththeserequirements.
Tri-D TR Three-way diverting valves Divertandchangeoverofvolumeflows.

withconnectionthreadM30x1.5forthermostatsandactuators page3.79
OV
I II
III
Tri-M TR Three-way mixing valves Mixandchangeoverofvolumeflows.

withconnectionthreadM30x1.5forthermostatsandactuators Page3.79
OV
AB A
Tri-CTR Three-way diverting and mixing valves Divertandmixofvolumeflows.

Tri-M plus TR Four-way mixing valves Fortheoperationinasecondarycircuit

withconnectionthreadM30x1.5forthermostatsandactuators (e.g.infancoilunits).
Page3.78
Tri-D plus TB Three-way diverting valves Divertandchangeoverofvolumeflows

with integrated T-piece (e.g.infancoilunits).
Temperature controllers Fordifferenttemperaturecontrolranges.

withconnectionthreadM30x1.5 Page3.81
Thermostat with remote control Page1.12

3 4
2
withconnectionthreadM30x1.5
5
1
Hycoflow Double regulating and commissioning valves Allowsdirectreadingofthebalancedflow

with flow display values.
Page3.50
3.100 2017
Cocon QTZ Pressure independent control valves Controlofe.g.aroomtemperaturevia

withconnectionthreadM30x1.5forthermostatsandactuators actuatorsandthermostatsandautomatic
limitationofthevolumeflowtoapre-
settablemaximumvalue.
Page3.52 3
Cocon 2TZ Regulating valves Controlofe.g.aroomtemperaturevia

actuatorsandthermostatsandautomatic
limitationofthevolumeflowtoa
presettablefixedvalue.
Page3.61
Room thermostat with fan drive Roomtemperaturecontrolwithconnection

facilityforelectrothermalactuators
(twopoint).
Page3.87
Dew point control Toavoidcondensation.

Page3.88
Electrothermal actuators Withtwopoint,threepointor0-10control.

Electromotive actuators Withtwopoint,threepointor0-10V

withconnectionthreadM30x1.5 controlfortheinstallationbuscontrol
systemsEIBandLON.
Page3.90
2017 3.101
A Thermostatic straight pattern valves Withhighkvsvalue.

Hycocon HTZ Regulating valves Regulatingvalvewithhighkvsvalue.

Hydrocontrol VTR Bronze double regulating and Forthehydronicbalancing.

commissioning valves Page3.26
0
2
4
6
0
2
4
6
0
DDC CR-BX Central control and regulating techniques Forcentraltemperaturecontrol.Setback

periodsandmonitoringfunctions.
Page12.31
3.102 2017
and cooling systems 3.o Products for radiant and chilled ceiling systems
Page
3.o Products for radiant and chilled ceiling systems 3

Content
Products for radiant and chilled ceiling systems 3.104
2017 3.103
Thisisasummaryofvalveswhichare
requiredforradiantandchilledceiling
systems,forthehydronicbalancingand
forthetemperatureandflowcontrol.
3
Cocon QTZ Pressure independent control valves Controlforinstanceofaroomtemperature
withconnectionthreadM30x1.5forthermostatsandactuators viaactuatorsandthermostatsand
automaticlimitationofthevolumeflow
toapresettablemaximumvalue.
Page3.52
Cocon 2TZ Regulating valves Controlforinstanceofaroomtemperature

viaactuatorsandthermostatsand
automaticlimitationofthevolumeflow
toapresettablefixedvalue.
Page3.61
Dew point control Toavoidcondensation.

Page3.88
Electrothermal actuators Withtwopointor0-10Vcontrol.

Electromotive actuators Withtwopoint,threepointor0-10Vcontrol

withconnectionthreadM30x1.5 fortheinstallationbuscontrolsystemsEIB
andLON.
Page3.90
Hydrocontrol VTR Bronze double regulating and Forthehydronicbalancing.

commissioning valves Page3.26
0
2
4
6
0
2
4
6
0
3.104 2017
Hydromat DTR Differential pressure regulators Withthedifferentialpressureinthe

installationchanging,thedifferential
pressureregulatormaintainsaconstant
fixeddifferentialpressurebetweensupply
andreturnintheriser. 3
Page3.37
Hydromat QTR Flow regulators Withtheflowintheinstallationchanging,

0
0
6
theflowregulatormaintainsaconstant
1
0
0
12
00
8
fixedvolumeflowintheriser.
Page3.36
OV
Optibal Ball valves Forfluidsinheatingandcoolingsystems.

Page5.04
OV
Insulation for Optibal ball valves MeetstherequirementsoftheGerman

EnergySavingDirectiveaccordingto
appendix5,table1,line5.
Page5.06
Strainers Forfluidsinheatingandcoolingsystems,
bronze withwirebasketswithdifferentmeshsized
tochoose.
Page5.32
Multidis SF Stainless steel distributors/collectors Modelsfor2upto12circuitswithflow

for surface heating and cooling measuringandregulatingdevices.
Page2.58
Ofix Compression fittings Fordifferentpipematerialsandtheir

connectiontovalvesanddistributors/
collectors.
Pages1.140and2.51
2017 3.105
and cooling systems 3.p Connection system
Page
3.p Connection system 3

Content
Summary of the product groups and connection systems with male thread 3.108
Summary of the product groups and connection systems with female thread 3.109
2017 3.107
Hydronic balancing in heating 3.p Connection system
and cooling systems Summary of the product groups and connection systems with male thread
Pipes Connection Connection system Male threaded connection

method
3 fitting (examples)
Copper pipe, Collar nut, compression ring Valves for hydronic balancing
and ring gasket
stainless steel
pipe, Screwed
connection for G 3/4 male thread according to
precision steel DIN EN 16313 (cone Euro)
soft sealing Connection piece
pipe Item no. 102744.
1)
Page 1.141

Item no. 15030..
Page 11.32
Screwed
connection for G 3/4 male thread according to DIN EN
16313 (cone Euro) metal to metal sealing
Copper pipe Item no. 102747.
Page 1.141
1)
Soldering

connection
Item no. 10610..
Page 3.45
Stainless steel
pipe Press

connection
1) Item no. 42015..
Page 8.69 0
6
4
2
0
6
4
2
0
Press
connection

Item no. 15121..
Copipe Page 11.12
Composition
pipe OV
Screwed
connection
Item no. 15079.. Connection piece
Page 11.32
0
0
6
Collar nut, compression ring 0

0
12
00
and outlet
8
Item no. 15030..

Page 11.32
Screwed
OV
PE-Xc pipe
connection
for G 3/4 male thread according
to DIN EN 16313 (cone Euro)
Item no. 10277..
Page 1.141
Item no. 10613..

Screwed Page 3.45

connection
Steel pipe
as well as
screwed fittings
Item no. 10614..
Page 3.45
Welding

connection
Item no. 10605..
Page 3.45
Other pipes
e.g. stainless steel All other pipes with their special connection may be connected with flat sealing tailpipes
pipe, thick walled (with ring gaskets and collar nuts) to Oventrop flat sealing and male threaded valves.
plastic pipe
This table is not exhaustive.
3.108 2017
Hydronic balancing in heating 3.p Connection system
and cooling systems Summary of the product groups and connection systems with female thread

method
Connection fitting Additional fitting Oventrop valves
(examples) 3
Compression nut and Valves for hydronic balancing
compression ring

Item no. 10271..
Female thread G 3/8G 3/4,
Page 3.45
Copper pipe
1)
Screwed
connection for G 3/4 male thread according to
DIN EN 16313 (cone Euro)
metal to metal sealing
Item no. 102747. Double nipple
Page 1.141

Copper pipe, and ring gasket
Item no. 15031..
Page 11.32
stainless steel
pipe,
for G 3/4 male thread according to
precision steel DIN EN 16313 (cone Euro)
pipe soft sealing 6
0
4
1) Item no. 102744 . 0

2
4
6
2
Page 1.141 0
Stainless steel Press

pipe connection
Item no. 42015/16..
Page 3.46/3.47

OV
Press
connection
Item no. 15120..
Page 11.12
Copipe
0
0
6
1
0
0
12
Composition 00
8
pipe
OV
Item no. 15079..

Page 11.32
Double nipple

Item no. 15031..
and outlet
Page 11.32
PE-Xc pipe Screwed
thin walled connection
plastic pipe
Item no. 10277..
Page 1.141
Steel pipe seal directly
1) Pipes with a wall thickness 1 mm will need reinforcing sleeves, except when the soft sealing fitting 102744. is used! Page 1.141
2017 3.109
Isolating and other pipe fittings Content
Page
5.a "Optibal" Ball valves

Content 5.03
"Optibal" Ball valves PN 16 5.04
OV
"Optibal" Ball valves with coupling PN 16 5.06
Accessories 5.06
Insulation 5.06
"Optibal" Ball valves with lever PN 16 5.07
5
"Optigas" Isolating ball valves 5.07
"Optibal" Ball valves with T-handle PN 16 5.08
Conversion set plastic handle (anthracite) 5.08
Ball valves "DZR" 5.09
Ball valves NPT 5.09
"Optibal" High temperature ball valves PN 16 5.10
"Optibal" High pressure ball valves PN 40 5.11
Accessories 5.11
5.b "Hygate" Gate valves

Content 5.13
"Hygate ATB" Gate valves PN 25 5.14
"Hygate ATR" Gate valves PN 25 5.14
"Hygate AFC" Flanged gate valves PN 16 5.15
5.c Valves PN 16/25

Content 5.17
Oblique pattern globe valves PN 25 5.18
Straight pattern globe valves 5.18
with setting indicator PN 25
Straight pattern globe valves PN 16 5.18
Oblique pattern drain valves PN 25 5.19
Lockshield spindles 5.19
Airvent PN 25 5.19
Accessories 5.19
5.d Butterfly valves

Content 5.21
Lugged butterfly valves PN 16 5.22
Wafer butterfly valves PN 16 5.23
Accessories 5.24
2017 5.01
Isolating and other pipe fittings Content
Page
5.e Piston type spring assisted check valves,

Content 5.25
Piston type spring assisted check valves 5.26
(female threaded model) PN 25
Swing type check valves 5.26
5 Swing type check valves (flanged model) PN 16 5.27
Swing type check valves (wafer model) PN 16 5.27
Double swing type check valves (wafer model) PN 16 5.27
5.f Airvents
Content 5.29
Airvents PN 10 5.30
5.g Strainers
Content 5.31
"Y" type strainers PN 25 5.32
Spare parts 5.32
Spare parts 5.33
Spare parts 5.34
5.h Spare parts

Content 5.35
Handwheels 5.36
PTFE washers 5.36
5.02 2017
Isolating and other pipe fittings 5.a "Optibal" Ball valves
Page

Content
"Optibal" Ball valves PN 16 5.04
OV
"Optibal" Ball valves with coupling PN 16 5.06
Accessories 5.06
Insulation 5.06
"Optibal" Ball valves with lever PN 16 5.07
5
"Optigas" Isolating ball valves 5.07
"Optibal" Ball valves with T-handle PN 16 5.08
Conversion set plastic handle (anthracite) 5.08
Ball valves "DZR" 5.09
Ball valves NPT 5.09
"Optibal" High temperature ball valves PN 16 5.10
"Optibal" High pressure ball valves PN 40 5.11
Accessories 5.11
2017 5.03
Isolating and other pipe fittings "Optibal" Ball valves PN 16
Packing
unit
"Optibal" Ball valves PN 16 Application:

brass, nickel plated, full flow, Pipe fitting for fluids.
extended plastic handle (anthracite) Max. operating pressure ps: 16 bar
with red cover plug for riser identification (PN 16), for cold water 20 bar, for air
and other harmless gases (not for gaseous
both ports female thread fluids group 1 according to directive
2014/68/EU) 10 bar.
DN 10 8.80 (10) 1077103 Operating temperature ts: 10 C up to +100 C
DN 15 22.00 (10) 1077104 Attention: Prevent formation of ice as it can
OV DN 20 43.00 (10) 1077106 destroy the pipework and valve.
5 DN 25 67.00 (10) 1077108 Chrome plated brass ball, PTFE seats, FKM
DN 32 99.00 (8) 1077110 O-ring seal.
DN 40 143.00 (6) 1077112
DN 50 254.00 (4) 1077116 Advantages:
full flow
diverse applications
as above, with thermometer (anthracite) all standard handles available
simple insulation of models with extended
DN 10 8.80 (10) 1078003 plastic handle
DN 15 22.00 (10) 1078004 high pressure rating due to blow-off proof
DN 20 43.00 (10) 1078006 stem and high body resistance
DN 25 67.00 (10) 1078008 ball surface hard-chrome plated
DN 32 99.00 (8) 1078010
DN 50 254.00 (4) 1078016 "Technical information":
one port male thread, one port female thread
DN 10 8.80 (10) 1077303

DN 15 22.00 (10) 1077304
DN 20 43.00 (10) 1077306
DN 25 67.00 (10) 1077308
DN 32 99.00 (8) 1077310
DN 40 143.00 (6) 1077312
DN 50 254.00 (4) 1077316
both ports female thread With plug and draining valve.

with draining valve (connection thread G )
OV
DN 15 (10) 1077804
DN 20 (5) 1077806
DN 25 (5) 1077808
DN 32 (5) 1077810
5.04 2017
Isolating and other pipe fittings "Optibal" Ball valves PN 16
Packing
unit
both ports press connection Application:

Pipe fitting for fluids.
DN 15 (10) 1077162 Max. operating pressure ps: 16 bar
DN 15 (10) 1077163 (PN 16), for cold water 20 bar, for air
DN 20 (10) 1077164 and other harmless gases (not for gaseous
DN 25 (10) 1077165 fluids group 1 according to directive
DN 32 (5) 1077166 2014/68/EU) 10 bar.
Operating temperature ts: 10 C up to +100 C
DN 40 and DN 50 see item no. 4208857/58: page 8.24
Attention: Prevent formation of ice as it can
destroy the pipework and valve.
Chrome plated brass ball, PTFE seats, FKM 5
O-ring seal.
one port female thread, Advantages:

one port press connection full flow
diverse applications
DN 15 (10) 1077152 all standard handles available
DN 15 (10) 1077153 simple insulation of models with extended
DN 20 (10) 1077154 plastic handle
DN 25 (10) 1077155 high pressure rating due to blow-off proof
DN 32 (5) 1077156 stem and high body resistance
ball surface hard-chrome plated
Press connection:
10088 / DVGW GW 541 and thin-walled C-steel
pipe (material no. E195/1.0034) according
to DIN EN 10305-3. Pressing must be carried
out to tighten the connection. Only use press
jaws with the original contours SANHA (SA),
instructions.
2017 5.05
"Optibal" Ball valves with coupling PN 16
Accessories
Isolating and other pipe fittings Insulation
Packing
unit
"Optibal" Ball valves with coupling PN 16 Application:

brass, nickel plated, full flow, Pipe fitting for central heating and
extended plastic handle (anthracite) cooling systems.
with red cover plug for riser identification Max. operating pressure ps: 16 bar
(PN 16), for cold water 20 bar, for air
one port with tapered sealing coupling with male thread, and other harmless gases (not for gaseous
one port female thread fluids group 1 according to directive
2014/68/EU) 10 bar.
DN 15 (10) 1075704 Operating temperature ts : 10 C up to+100 C
DN 20 (10) 1075706 Attention: Prevent formation of ice as it can
5 DN 25 (10) 1075708 destroy the pipework and valve.
DN 32 (10) 1075710 Chrome plated brass ball, PTFE seats, FKM
O-ring seal.
Accessories
Insulation For heating and cooling systems.

With stem extension also suitable for other
for brass ball valves "Optibal" handles.
with extended plastic handle All ball valves "Optibal" with extended plastic
ball valves with female thread (item no. 10771/80/87/91..) handle can also be coated with standard
insulation material.
DN 15 (also for DN 10) 1078092
DN 25 1078094 Meet the requirements of the German Energy
DN 32 1078095 Saving Directive according to appendix 5, table
DN 20 1078093 1, line 5.
DN 40 1078096
DN 50 1078097 Building material class B2 according to DIN
4102.
Blue cover plug Operating temperature ts: +100 C
for riser identification,
for replacement of the existing red cover plug
DN 10 + DN 15, set = 10 pieces 1077171

DN 20 + DN 25, set = 10 pieces 1077172
DN 32 - DN 50, set = 5 pieces 1077173
Thermometer conversion set, anthracite

for item no. 10771/73/78/57/91 ..
DN 10 + DN 15 (10) 1077181
DN 20 and DN 25 (10) 1077182
DN 32 - DN 50 (10) 1077183
Stem extensions To upgrade brass ball valves "Optibal" with

brass, with swivel plastic sleeve extended plastic handle (except for item no.
10787..).
Extension in mm By sealing the swivel plastic sleeve against the
insulation in cooling systems, no humidity can
up to DN 15 38.5 (10) 1696081 reach the pipework via the stem extension.
DN 20 + DN 25 39 (10) 1696082 Only one extension can be used.
DN 32 - DN 50 64 (10) 1696083
5.06 2017
"Optibal" Ball valves with lever PN 16
Isolating and other pipe fittings "Optigas" Isolating ball valves
Packing
unit
"Optibal" Ball valves with lever PN 16 Application:

galvanised steel lever with plastic coating Up to DN 50:
Max. operating pressure ps: 16 bar
both ports female thread (PN 16) for cold water 20 bar, for air
DN 8 5.60 (10) 1076002 fluids group 1 according to directive
DN 10 8.80 (10) 1076003 2014/68/EU) 10 bar.
DN 20 43.00 (10) 1076006 DN 65 up to DN 100:
DN 25 67.00 (10) 1076008 Max. operating pressure ps: 16 bar at 70 C 5
DN 32 99.00 (8) 1076010 (PN 16), 12 bar at 85 C, 8 bar at 100 C
DN 50 254.00 (4) 1076016 CE marking according to directive 2014/68/EU.
DN 80 720.00 1076024 destroy the pipework and valve.
DN 100 1,120.00 1076032
one port male thread,
one port female thread
DN 10 8.80 (10) 1076203

DN 15 22.00 (10) 1076204
DN 20 43.00 (10) 1076206
DN 25 67.00 (10) 1076208
DN 32 99.00 (8) 1076210
"Optigas" Isolating ball valves

brass, nickel plated, DVGW approved, with full flow Application:
and female thread according to EN 10226-1, Gas installations according to DVGW-TRGI
stem with double O-ring seal made of FKM, used with gas according to DVGW work sheet
ball hard-chrome plated, PTFE seats G 260/l including liquid gas in gaseous state.
DN 15 Rp (25) 3016404 Temperature range: -20 C up to +60 C

DN 20 Rp (25) 3016406 MOP 5 (5 bar according to EN 331).
DN 25 Rp 1 (25) 3016408
DN 32 Rp 1 (10) 3016410
DN 40 Rp 1 (10) 3016412 Heating, cooling and industrial application:
DN 50 Rp 2 (5) 3016416 Water, water and glycol mixtures, heating oil,
fuels and air.
Full flow according to DIN EN 1983.
for cold water 20 bar, for air and other
harmless gases (not for gaseous fluids
group 1 according to directive 2014/68/EU)
10 bar.

2017 5.07
Isolating and other pipe fittings "Optibal" Ball valves with T-handle PN 16
kv Packing
s unit
"Optibal" Ball valves with T-handle PN 16 Application:

metal T-handle, Max. operating pressure ps: 16 bar
both ports female thread (PN 16), for cold water 20 bar, for air
DN 10 8.80 (10) 1076103 fluids fluids group 1 according to directive
DN 15 22.00 (10) 1076104 2017/68/EU) 10 bar.
DN 32 99.00 (8) 1076110 destroy the pipework and valve.
5
one port male thread,
DN 10 8.80 (10) 1076303

DN 15 22.00 (10) 1076304
DN 20 43.00 (10) 1076306
DN 25 67.00 (10) 1076308
DN 32 99.00 (8) 1076310
one port with tapered sealing coupling with male thread,

DN 15 (10) 1075804
DN 20 (10) 1075806
DN 25 (8) 1075808
DN 32 (8) 1075810
Stem extensions To upgrade brass ball valves "Optibal" (except

brass, with swivel plastic sleeve for item no. 10787..).
By sealing the swivel plastic sleeve against the
Extension in mm insulation in cooling systems, no humidity can
reach the pipework via the stem extension.
up to DN 15 38.5 (10) 1076081 To avoid condensation at the lever, the latter
DN 20 + DN 25 39 (10) 1076082 must also be insulated, for instance by slipping
DN 32 - DN 50 64 (10) 1076083 an elastic pipe insulation over the stem
DN 65 - DN 100 85 (10) 1076084 extension and the shank of the plastic handle.
Only one extension can be used.
Conversion set plastic handle (anthracite) For subsequent conversion of brass ball valves
with red cover plug for riser identification "Optibal" with lever or metal T-handle to plastic
handle (except for item no. 10787..) allowing
up to DN 15 (10) 1076071 the insulation of the ball valves.
DN 20 + DN 25 (10) 1076072
DN 32 - DN 50 (10) 1076073 For further information see
5.08 2017
Ball valves "DZR"
Isolating and other pipe fittings Ball valves NPT
Packing
unit
Ball valves "DZR" Application:

brass resistant to dezincification, full flow, Pipe fitting for central heating and
both ports female thread according to ISO 228/1 cooling systems.
(thread also corresponds to Rp according to EN 10226-1). Max. operating pressure ps: 30 bar pressure
impact resistant at 30 C (PN 30), 6 bar
Operating element: at 120 C, for air max. 10 bar.
Galvanised steel lever with plastic coating Pressure/temperature allocation see data
sheet.
DN 20 43.00 (10) 1079006 destroy the pipework and valve. 5
DN 25 67.00 (10) 1079008
DN 32 99.00 (8) 1079010
DN 40 143.00 (6) 1079012
DN 50 254.00 (4) 1079016
Aluminium T-handle, red
DN 15 22.00 (10) 1079404

DN 20 43.00 (12) 1079406
Extended plastic handle (anthracite)

with red cover plug for riser identification
DN 15 22.00 (8) 1079104

DN 20 43.00 (10) 1079106
DN 25 67.00 (8) 1079108
DN 32 99.00 (6) 1079110
DN 40 143.00 (6) 1079112
DN 50 254.00 (4) 1079116
both ports compression ends for copper pipe according to EN 1254-2 Application:
Pipe fitting for central heating and
Extended plastic handle (anthracite) cooling systems.
with red cover plug for riser identification Max. operating pressure ps: 16 bar pressure
impact resistant at 30 C (PN 16), 10 bar
15 mm (8) 1079704 up to 65 C, 6 bar up to 110 C and
22 mm (10) 1079706 5 bar up to 120 C
28 mm (8) 1079708 Operating temperature ts: -10 C up to +120 C
35 mm (6) 1079710 WRAS certified.
Locking cap, brass The locking cap can be mounted instead of

the handle.
DN 15 (5) 1079254 The ball valve is locked in open and shut-off
DN 20 + DN 25 (5) 1079255 position and setting is secured.
DN 32 - DN 50 (5) 1079256
Ball valves NPT Application:

brass, unplated, full flow Pipe fitting for central heating and
with red cover plug for riser identification
both ports NPT female thread according to ANSI B1.20.1 Operating temperature ts: -10 C up to -100 C
DN 15 NPT (8) 1077904 Attention: Prevent formation of ice as it can

DN 20 NPT (10) 1077906 destroy the pipework and the valve.
DN 25 NPT 1 (8) 1077908
DN 32 NPT 1 (6) 1077910 Chrome plated brass ball, PTFE seats, FKM
DN 40 NPT 1 (6) 1077912 O-ring seal.
DN 50 NPT 2 (4) 1077916
2017 5.09
Isolating and other pipe fittings "Optibal" High temperature ball valves PN 16
Packing
unit
"Optibal" High temperature ball valves PN 16 Application:

brass, nickel plated, reduced flow, Pipe fitting for central heating and
both ports female thread Max. operating pressure ps: 16 bar (PN 16)
Operating temperature ts: 10 C up to +150C,
DN 20 Rp 9.50 (10) 1078706 for short periods up to +180 C;
DN 25 Rp 1 17.00 (10) 1078708 with press connection max. +120 C,
DN 32 Rp 1 35.00 (5) 1078710 for short periods up to +150 C
5 Attention: Prevent formation of ice as it can

Press connection:
DN 20 22 mm (10) 1078760 For the direct connection of copper pipes
DN 25 28 mm (10) 1078761 according to DIN EN 1057 / DVGW GW 392,
DN 32 35 mm (5) 1078762 stainless steel pipes according to DIN EN
C-steel pipe (material no. E 195/1.0034)
Accessories according to DIN EN 10305-3. Pressing
Stem seal for replacement purposes (set of 5 pieces) Only use press jaws with the original contours
(not suitable for valves with marking "HT") SANHA (SA), Geberit-Mapress (MM) or Viega
DN 20 1078790 must be carried out according to the
DN 25 / 32 1078791 installation instructions.
for item no. (10) 1078382

1078171/ 72/ 73, 1078371/ 72/ 73,
1078708/ 10/ 61/ 62 and
4208806/ 08, 4208854/ 55, 4208906/ 08
5.10 2017
"Optibal" High pressure ball valves PN 40
Isolating and other pipe fittings Accessories
Packing
unit
"Optibal" High pressure ball valves PN 40 Application:

bronze, unplated, full flow Pipe fitting for central heating (especially for
district heating) and cooling systems.
one port with weldable steel tailpipe,
one port with cap, Max. operating pressure ps: 40 bar at 150 C
extended plastic handle (anthracite) (PN 40)
DN 15 (5) 1066604 (with plastic handle up to 120 C)
DN 20 (5) 1066606
DN 25 (5) 1066608 For further information see
DN 32 (5) 1066610 "Technical information": 5

one port with cap,
aluminium lever
DN 15 1066504
DN 20 1066506
DN 25 1066508
DN 32 1066510
both ports with weldable steel tailpipe,

extended plastic handle (anthracite)
DN 15 (5) 1065604
DN 20 (5) 1065606
DN 25 (5) 1065608
DN 32 (5) 1065610
both ports with weldable steel tailpipe,

aluminium lever
DN 15 1065504
DN 20 1065506
DN 25 1065508
DN 32 1065510
Accessories
Cap with washer and chain For item no. 10650/51/55/56.. and
10660/61/65/66 ..
DN 15 (25) 1066904 G female thread

DN 20 (25) 1066906 G 1 female thread
2017 5.11
Isolating and other pipe fittings 5.b "Hygate" Gate valves
Page

Content
"Hygate ATB" Gate valves PN 25 5.14
5
2017 5.13
"Hygate ATB" Gate valves PN 25
Isolating and other pipe fittings "Hygate ATR" Gate valves PN 25
Packing
unit
"Hygate ATB" Gate valves PN 25 Application:

(with isolating facility, threaded connection, brass) Central heating and cooling systems with
closed circuits and industrial plants, for
Standard model operation with non-aggressive, harmless fluids
DN 15 11.00 (50) 1040004 5195).
DN 20 34.00 (50) 1040006 Material resistant to: mineral, heating and
DN 25 46.00 (25) 1040008 hydraulic oils
DN 32 60.00 (25) 1040010
5 DN 40 105.00 (10) 1040012 Max. operating pressure ps: 25 bar (PN 25)
DN 50 170.00 (5) 1040016 Operating temperature ts:-10 C up to +120 C
DN 65 280.00 (5) 1040020 (The valid rules and standards for the use of
DN 80 420.00 (2) 1040024 these media may restrict the temperature
DN 100 650.00 (2) 1040032 range. Not suitable for gaseous fluids group 1
according to directive 2014/68/EU).
Body, bonnet, wedge and stem made of brass,

with re-adjustable gland packing made of
material containing PTFE.

"Hygate ATR" Gate valves PN 25 Application:

(with isolating facility, threaded connection, bronze) Central heating and cooling systems with
DN 10 10.00 (50) 1043003 operation with non-aggressive, harmless fluids
DN 15 11.00 (50) 1043004 (e. g. water or suitable water and glycol
DN 25 46.00 (25) 1043008 5195).
DN 40 105.00 (10) 1043012 hydraulic oils, fuels, water vapour as well as air
DN 50 170.00 (5) 1043016 and other harmless and non-aggressive gases
DN 65 280.00 (5) 1043020 (not for gaseous fluids group 1 according to
DN 80 420.00 (2) 1043024 directive 2014/68/EU)

Operating temperature ts:
-10 C up to +200 C for water
(0 C up to 150 C for water vapour)
(The valid rules and standards for the use of
these media may restrict the temperature
range.)
Body, bonnet and wedge made of bronze,

stem made of brass resistant to dezincification,
with re-adjustable gland packing made of
material containing PTFE, brass gland nut.

Handwheels: Page 5.36
5.14 2017
"Hygate AFC" Flanged gate valves PN 16
Isolating and other pipe fittings "Hygate AFC" Flanged gate valves PN 10
"Hygate AFC" Flanged gate valves PN 16 Application:

(with isolating facility, flanged connection, cast iron) Central heating and cooling systems with
DN 40 107.00 1045049 aggressive, harmelss fluids (e. g. water or
DN 50 250.00 1045050 suitable water and glycol mixtures according to
DN 65 430.00 1045051 VDI 2035/NORM 5195).
DN 80 790.00 1045052
DN 100 1,250.00 1045053 Max. operating pressure ps: 16 bar (PN 16)
DN 125 1,960.00 1045054 Operating temperature ts: 10 C up to +120 C
DN 150 2,790.00 1045055 Body, bonnet and stuffing box assembly made
DN 200 2,880.00 1045056 of cast iron (EN-GJL-250 DIN EN1561), stem 5
DN 250 4,306.00 1045057 and valve seat made of brass, asbestos free
DN 300 6,380.00 1045058 seal.
Round flanges according to DIN EN 1092-2,
PN 16.
Lengths according to EN 558-1, basic series 15

"Hygate AFC" Flanged gate valves PN 10 Application:

(with isolating facility, flanged connection, cast iron) Central heating and cooling systems with
DN 40 120.00 1045149 aggressive, harmless fluids (e. g. water or
DN 50 270.00 1045150 suitable water and glycol mixtures according
DN 65 470.00 1045151 to VDI 2035/NORM 5195).
DN 80 900.00 1045152
DN 100 1,600.00 1045153 Max. operating pressure ps: 10 bar (PN 10)
DN 150 3,680.00 1045155 Body, bonnet and stuffing box assembly made
DN 200 1045156 of cast iron (EN-GJL-250 DIN EN1561), stem
DN 250 1045157 and valve seat made of brass, asbestos free
DN 300 1045158 seal.
PN 10.
Lengths according to EN 558-1, basic series 14

2017 5.15
Isolating and other pipe fittings 5.c Valves PN 16/25
Page
5.c Valves PN 16/25

Content
Straight pattern globe valves 5.18
Straight pattern globe valves PN 16 5.18
Oblique pattern globe valves PN 25 5.19 5
Lockshield spindles 5.19
Airvent PN 25 5.19
Accessories 5.19
2017 5.17
5.c Valves PN 16/25
Oblique pattern globe valves PN 25
Straight pattern globe valves
Isolating and other pipe fittings Straight pattern globe valves PN 16
Packing
unit
Oblique pattern globe valves PN 25 Application:

with plastic handwheel, bronze Item no. 10502/03/21..:
bonnet and stem with maintenance-free O-ring seal, Central heating and cooling systems with
additional sealing when stem is fully opened, closed circuits, for operation with non-
setting indicator "valve fully opened", seat with PTFE seal, aggressive, harmless fluids (e. g. water or
materials suitable for potable water suitable water and glycol mixtures according to
VDI 2035/NORM 5195), as well as
without draining facility installations with open circuits which are
operated with water.
DN 10 3.10 (10) 1050203
5 DN 15 4.40 (10) 1050204 Max. operating pressure ps: 25 bar (PN 25)
DN 25 17.40 (10) 1050208
DN 32 29.20 (5) 1050210 Bronze body, brass bonnet.
DN 40 42.90 (5) 1050212 The oblique pattern globe valves
DN 50 64.00 (5) 1050216 DN 10 - DN 20 are suitable for use with
compression fittings, item no. 10271..,
page 3.45.
with draining facility (level with the handwheel)
DN 10 3.10 (10) 1050303 "Technical information":
DN 15 4.40 (10) 1050304
DN 20 9.50 (10) 1050306
DN 25 17.40 (10) 1050308
DN 32 29.20 (5) 1050310
DN 40 42.90 (5) 1050312
DN 50 64.00 (5) 1050316
Straight pattern globe valves

with plastic handwheel, bronze
length according to DIN 3844, series 2
bonnet and stem with maintenance-free O-ring seal,
additional sealing when stem is fully opened,
setting indicator "valve fully opened", seat with PTFE seal,
materials suitable for potable water
without draining facility
DN 8 1.45 (10) 1052102

DN 10 2.10 (10) 1052103
DN 15 3.70 (10) 1052104
DN 20 6.40 (10) 1052106
DN 25 9.80 (10) 1052108
DN 32 15.80 (5) 1052110
DN 40 22.50 (5) 1052112
DN 50 32.60 (5) 1052116
Straight pattern globe valves PN 16 Application:

bronze Central heating and cooling systems with
length according to DIN 3844, series 2 closed circuits and industrial plants, for
with PTFE seal, not suitable for potable water operation with non-aggressive, harmless fluids
Bonnets (item no. 10590..) on request. (e. g. water or suitable water and glycol
The bonnets for the bodies DN 8, DN 10 and DN 15 are identical. mixtures according to VDI 2035/NORM
Bodies (item no. 10580..) on request. 5195).
Material resistant to: mineral, heating and
DN 8 3.00 (10) 1052002 hydraulic oils, fuels, water vapour as well as air
DN 10 3.00 (10) 1052003
DN 25 8.50 (10) 1052008 For air:
DN 50 30.00 (5) 1052016
DN 65 55.00 (2) 1052020 Bronze body, brass bonnet.
The straight pattern globe valves are not

suitable for compression connection.
5.18 2017
5.c Valves PN 16/25
Oblique pattern globe valves PN 25
Oblique pattern drain valves PN 25
Lockshield spindles
Isolating and other pipe fittings Airvent PN 25
Packing
unit
Oblique pattern globe valves PN 25 Application:

both ports with weldable steel tailpipes, closed circuits (especially for district heating
with PTFE seal and transmission units), for operation with non-
with handwheel suitable water and glycol mixtures according
to VDI 2035, NORM 5195 and FW510).
DN 15 1065004
DN 20 1065006 Max. operating pressure ps: 25 bar (PN 25)
DN 25 1065008 Operating temperature ts: 0 C up to 150 C
OV
DN
5
25
DN 32 1065010
PN 25
Bonnet secured against accidental release.

Oblique pattern drain valves PN 25 "Technical information":
bronze
one port with cap
with handwheel
DN 15 1066004
DN 20 1066006
DN 25 1066008
OV
DN
25
PN 25
DN 32 1066010
Lockshield spindles Lockshield spindle as replacement for oblique

for oblique pattern valves and airvent PN 25 pattern valves and airvent PN 25.
DN 15 (5) 1069292
DN 20 (5) 1069293
DN 25 (5) 1069294
DN 32 (5) 1069295
Airvent PN 25
steel
DN 15 (25) 1067004
Accessories
Cap with washer and chain For item no. 10650/51/55/56.. and
10660/61/65/66 ..
DN 15 (25) 1066904 G female thread

Washer for item no. 10650.., 10651.., 10660.., 10661..
DN 15 (10) 1065904
DN 20 (10) 1065906
DN 25 (10) 1065908
DN 32 (10) 1065910
General purpose lockshield key (10) 1066151
2017 5.19
Isolating and other pipe fittings 5.d Butterfly valves
Page

Content
Lugged butterfly valves PN 16 5.22
Wafer butterfly valves PN 16 5.23
Accessories 5.24
2017 5.21
Isolating and other pipe fittings Lugged butterfly valves PN 16
Lugged butterfly valves PN 16 Application:

with EPDM liner Central heating and cooling systems and
Body: GJS-500 (GGG-50) nodular cast iron industrial plants with closed circuits, for
Stem: AISI420 stainless steel operation with non-aggressive, harmless fluids
Disc: CF8M AISI316 stainless steel (e. g. water or suitable water and glycol
Lugged pattern, lever operated 5195).

DN 65 198.00 1048251 Operating temperature ts: 10 C up to +110 C
5 DN 80 330.00 1048252
DN 100 545.00 1048253 Extended neck for insulation purposes.
DN 125 890.00 1048254
DN 150 1,410.00 1048255
DN 200 2,356.00 1048256
Lugged pattern, gear operated
DN 50 108.00 1048950
DN 65 198.00 1048951
DN 80 330.00 1048952
DN 100 545.00 1048953
DN 125 890.00 1048954
DN 150 1,410.00 1048955
DN 200 2,356.00 1048956
DN 250 3,780.00 1048957
DN 300 5,590.00 1048958
DN 350 8,080.00 1048959
DN 400 10,533.00 1048960
Lugged butterfly valves PN 16 Application:

with NBR liner Central heating and cooling systems and
Stem: AISI 420 stainless steel operation with non-aggressive, harmless fluids
Lugged pattern, lever operated 5195).
Material resistant to: mineral oils, air and other
DN 50 108.00 1048350 harmless non-flammable gases (not suitable for
DN 65 198.00 1048351 the gas installation according to TRGI)
DN 80 330.00 1048352
DN 150 1,410.00 1048355
DN 200 2,356.00 1048356 Extended neck for insulation purposes.
Lugged pattern, gear operated For further information see

DN 50 108.00 1049050
DN 65 198.00 1049051
DN 80 330.00 1049052
DN 100 545.00 1049053
DN 125 890.00 1049054
DN 150 1,410.00 1049055
DN 200 2,356.00 1049056
DN 250 3,780.00 1049057
DN 300 5,590.00 1049058
DN 350 8,080.00 1049059
DN 400 10,533.00 1049060

Isolating and other pipe fittings Wafer butterfly valves PN 16
Wafer butterfly valves PN 16 Application:

with EPDM liner Central heating and cooling systems and
Wafer pattern, lever operated 5195).

DN 80 330.00 1046252 5
DN 100 545.00 1046253 Extended neck for insulation purposes.
DN 125 890.00 1046254
DN 150 1,410.00 1046255
DN 200 2,356.00 1046256
Wafer pattern, gear operated
DN 50 108.00 1046950
DN 65 198.00 1046951
DN 80 330.00 1046952
DN 100 545.00 1046953
DN 125 890.00 1046954
DN 150 1,410.00 1046955
DN 200 2,356.00 1046956
DN 250 3,780.00 1046957
DN 300 5,590.00 1046958
Wafer butterfly valves PN 16 Application:

with NBR liner Central heating and cooling systems and
Wafer pattern, lever operated 5195).
Material resistant to: mineral oils, air and other
DN 50 108.00 1046350 harmless non-flammable gases (not suitable for
DN 65 198.00 1046351 the gas installation according to TRGI)
DN 80 330.00 1046352
DN 150 1,410.00 1046355
DN 200 2,356.00 1046356 Extended neck for insulation purposes.
Wafer pattern, gear operated For further information see

DN 50 108.00 1047050
DN 65 198.00 1047051
DN 80 330.00 1047052
DN 100 545.00 1047053
DN 125 890.00 1047054
DN 150 1,410.00 1047055
DN 200 2,356.00 1047056
DN 250 3,780.00 1047057
DN 300 5,590.00 1047058

Isolating and other pipe fittings Accessories
Accessories
(without illustration)
Lever handles for butterfly valves
DN 50 - DN 80 1048291
DN 100 - DN 150 1048292
DN 200 1048293
5 Gear operator
DN 50 - DN 80 1049950
DN 100 - DN 150 1049953
DN 200 1049956
DN 250 - DN 300 1049957
DN 350 1049959
DN 400 - DN 450 1049960
Handwheels for gear operator
DN 100 - DN 150 1048991

DN 200 - DN 300 1048992
DN 350 - DN 600 1048993
5.24 2017
Isolating and other pipe fittings swing type check valves
Page

Content
Piston type spring assisted check valves 5.26
Swing type check valves 5.26
Swing type check valves (flanged model) PN 16 5.27
5
Swing type check valves (wafer model) PN 16 5.27
Double swing type check valves (wafer model) PN 16 5.27
2017 5.25
Piston type spring assisted check valves
Isolating and other pipe fittings (female threaded model) PN 25
Packing
unit
Piston type spring assisted check valves Non-return check valve for horizontal and
(female threaded model) PN 25 vertical installation.
bronze, brass Bronze body, inner parts made of brass.
with FKM seal Valve disc spring assisted.
Opening pressure 40 mbar (~400 mm WG).
DN 10 2.50 (10) 1072003 Sizes DN 10 - DN 20 are suitable for use with
DN 15 3.80 (10) 1072004 compression fittings, item no. 10271.., page
DN 20 6.00 (10) 1072006 3.45.
DN 25 13.00 (10) 1072008
DN 32 17.00 (5) 1072010 Application:
5 DN 40 19.00 (5) 1072012 Central heating and cooling systems with
DN 50 30.50 (5) 1072016 closed circuits and industrial plants, for
operation with non-aggressive, harmless fluids
5195).
Material resistant to: mineral, heating and
hydraulic oils, fuels, air
(The valid rules and standards for the use of

range. Not suitable for gaseous fluids group 1
according to directive 2014/68/EU).

[6 bar (PN 25) for air]
Operating temperature ts: 0 up to 100C
[10 C up to +120 C for water]

Piston type spring assisted check valves Central heating and cooling systems with
(female threaded model) PN 25 closed circuits, for operation with non-
bronze, brass aggressive, harmless fluids (e. g. water or
with EPDM seal, suitable water and glycol mixtures according
materials suitable for potable water to VDI 2035/NORM 5195), as well as systems
with open circuits which are operated with
DN 10 3.40 (10) 1072103 water.
DN 15 5.50 (10) 1072104
DN 32 33.00 (5) 1072110
DN 40 44.00 (5) 1072112
DN 50 68.00 (5) 1072116
Swing type check valves Application:

(female threaded model) PN 16 Central heating and cooling systems with
bronze, brass closed circuits, for operation with non-
with metal to metal seal aggressive, harmless fluids (e. g. water or
DN 15 5.50 (10) 1075004 VDI 2035/NORM 5195).
DN 20 10.20 (10) 1075006
DN 40 44.90 (5) 1075012 [80 C up to 120 C: max. ps 10 bar]
DN 50 104.40 1075016
DN 65 175.00 1075020 Non-return check valve for horizontal and
vertical (riser) installation.
Bronze body, inner parts made of brass.

5.26 2017
Swing type check valves (flanged model) PN 16
Swing type check valves (wafer model) PN 16
Isolating and other pipe fittings Double swing type check valves (wafer model) PN 16
Swing type check valves (flanged model) PN 16 Application:

cast iron Central heating and cooling systems with
DN 65 326.00 1073051 VDI 2035/NORM 5195).
DN 80 490.00 1073052
DN 150 1,700.00 1073055
DN 200 2,410.00 1073056 Body, cover and stuffing box assembly made 5
DN 250 3,870.00 1073057 of cast iron (EN-GJL-250 DIN EN1561), valve
DN 300 5,670.00 1073058 seat made of brass, asbestos free gaskets.
PN 16.

Swing type check valves (wafer model) PN 16 Application:

steel Central heating and cooling systems with
with EPDM seal closed circuits, for operation with non-
DN 50 54.00 1072550 VDI 2035/NORM 5195).
DN 65 75.00 1072551
DN 125 342.00 1072554
DN 150 490.00 1072555 Body and flap made of galvanised steel.
DN 200 1,128.00 1072556 Suitable for 3 m/s velocity.
DN 250 1,500.00 1072557
DN 300 1,850.00 1072558 For further information see
DN 350 2,700.00 1072559 "Technical information":
DN 400 3,500.00 1072560
DN 450 5,200.00 1072561
Double swing type check valves (wafer model) PN 16 Application:

seat seal made of EPDM closed circuits, for operation with non-
DN 65 82.00 1072651 VDI 2035/NORM 5195).
DN 80 115.00 1072652
DN 150 700.00 1072655
DN 200 1,100.00 1072656 Body made of cast iron (EN-GJL-250 DIN EN
DN 250 2,000.00 1072657 1561), stainless steel flaps.
DN 300 3,300.00 1072658
DN 350 3,950.00 1072659 For further information see
DN 400 5,000.00 1072660 "Technical information":
DN 450 6,550.00 1072661
DN 500 8,250.00 1072662
DN 600 12,600.00 1072663
2017 5.27
Isolating and other pipe fittings 5.f Airvents
Page
5.f Airvents
Content
Airvents PN 10 5.30
2017 5.29
5.f Airvents
Isolating and other pipe fittings Airvents PN 10
Packing
unit
Airvents PN 10 Application:
Brass automatic airvent closed circuits, for operation with non-
with automatic shut off aggressive, harmless fluids (e. g. water or
G (10) 1088303 VDI 2035/NORM 5195).
G (10) 1088304
G (10) 1088306 Max. operating pressure ps: 10 bar (PN 10)
5 angle pattern
nickel plated, without automatic shut off
G (10) 1088404
Brass precision airvent With air admission barrier in the venting valve.
with automatic shut off
G (10) 1088203
5.30 2017
Isolating and other pipe fittings 5.g Strainers
Page
5.g Strainers
Content
Spare parts 5.32
Spare parts 5.33
5
Spare parts 5.34
2017 5.31
5.g Strainers
"Y" type strainers PN 25
Spare parts
Isolating and other pipe fittings Strainers PN 16
Packing
unit
"Y" type strainers PN 25 Application:

with simple wire basket, 600 m operation with non-aggressive, harmless fluids
DN 10 1.70 (10) 1120003 5195).
DN 15 3.80 (10) 1120004 Strainers 11200/10:
DN 25 13.40 (10) 1120008 hydraulic oils, fuels, water vapour, as well as air
5 DN 32 23.90 (5) 1120010 and other harmless, non-aggressive gases (not
DN 40 32.50 (5) 1120012 suitable for gaseous fluids group 1 according
DN 50 56.20 (5) 1120016 to directive 2014/68/EU)
DN 65 101.30 1120020
with double wire basket for fine filtering, 250 m (The valid rules and standards for the use of
DN 8 1.40 (10) 1121002 range.)
DN 10 1.60 (10) 1121003
DN 15 3.40 (10) 1121004 The sizes DN 10 - DN 80 are WRAS (United
DN 20 6.90 (10) 1121006 Kingdom) certified for installation in potable
DN 25 10.90 (10) 1121008 water systems.
DN 32 20.70 (5) 1121010
DN 40 27.40 (5) 1121012 The strainers DN 10 - DN 20 are suitable
DN 50 47.30 (5) 1121016 for use with compression fittings, item no.
DN 65 82.10 1121020 10271.., page 3.45.
DN 80 102.00 1121024
DN 8 DN 50 bronze body, brass bonnet.
DN 65 DN 80 brass body and bonnet.
Spare parts
Wire basket made of stainless chromium steel.
Wire basket Item no. 11200:
(mesh size 600 m) Mesh size 0.6 mm
100 meshes/cm2, 600 m.
DN 8 + DN 10 1123003
DN 15 1123004
Item no. 11210:
DN 20 1123006
Mesh size 0.25 mm
DN 25 1123008
DN 32 1123010
DN 40 1123012
Wire basket
DN 50 (100) 1123016
DN 65 1123020 D Height
DN 80 1123024
DN 8 + DN 10 22 13.5
DN 15 27 19
Double wire basket DN 20 36 25
(mesh size 250 m) DN 25 42 31
DN 32 55 43
DN 8 + DN 10 1123103 DN 40 62 48.5
DN 15 1123104 DN 50 72 64
DN 20 1123106 DN 65 110 70
DN 80 130 80
DN 25 1123108
DN 32 1123110
DN 40 1123112 For further information see
DN 50 1123116 "Technical information":
DN 65 1123120
DN 80 1123124
Strainer PN 25
with double wire basket 250 m Strainer 11410:
DN 20 4.80 (10) 1141006
5.32 2017
5.g Strainers
Isolating and other pipe fittings Spare parts

DN 25 15.00 1122047 VDI 2035/NORM 5195).
DN 32 21.00 1122048
DN 50 60.00 1122050 Operating temperature ts: 0 up to 120 C
DN 65 105.00 1122051
DN 80 140.00 1122052 Body and cover made of cast iron (EN- 5
DN 100 225.00 1122053 GJL-250 DIN EN1561), wire basket made of
DN 125 340.00 1122054 stainless steel, asbestos free gasket.
DN 150 405.00 1122055 Round flanges according to DIN EN 1092-2,
DN 200 715.00 1122056 PN 16.
DN 250 1,355.00 1122057
DN 300 1,890.00 1122058 Mesh size:
DN 350 2,970.00 1122059 DN 15 - 32: 1.0 mm
DN 400 4,150.00 1122060 DN 40 - 150: 1.5 mm
DN 450 5,540.00 1122061 DN 200 - 300: 2.0 mm
DN 500 6,850.00 1122062 DN 350 - 600: 3.0 mm
DN 600 9,280.00 1122063
Spare parts
Wire basket and blind flange ring gasket
DN 15/20 1122085
DN 25 1122087
DN 32 1122088
DN 40 1122089
DN 50 1122090
DN 65 1122091
DN 80 1122092
DN 100 1122093
DN 125 1122094
DN 150 1122095
DN 200 1122096
DN 250 1122097
DN 300 1122098
DN 350 1122159
DN 400 1122160
DN 450 1122161
DN 500 1122162
DN 600 1122163
Larger sizes on demand.
2017 5.33
5.g Strainers
Isolating and other pipe fittings Spare parts
Packing
unit

both ports with weldable steel tailpipe operation with non-aggressive, harmless fluids
wire basket made of stainless chromium steel (e. g. water or suitable water and glycol
mesh size 0.6 mm mixtures according to VDI 2035/NORM
5195).
DN 15 1068004 Material resistant to: mineral, heating and
DN 20 1068006 hydraulic oils, fuels, water vapour as well as air
DN 25 1068008 and other harmless non-aggressive gases (not
5 DN 32 1068010 for gaseous fluids group 1 according to
directive 2014/68/EU)
Spare parts Max. operating pressure ps: 25 bar (PN 25)

Wire basket
(mesh size 0.6 mm)
DN 15 (10) 1068804
DN 20 (10) 1068806
DN 25 (10) 1068808
DN 32 (10) 1068810
5.34 2017
Isolating and other pipe fittings 5.h Spare parts
Page
5.h Spare parts

Content
Handwheels 5.36
PTFE washers 5.36
2017 5.35
5.h Spare parts
Handwheels
Isolating and other pipe fittings PTFE washers
Packing
unit
Handwheels
red, for gate valves 10400/30.. and bronze valves 10520..
DN 10 + DN 15 (100) 1900051
DN 20 + DN 25 (100) 1900052
DN 32 + DN 40 (100) 1900053
DN 50 (100) 1900054
DN 65 (100) 1900055
DN 80 + DN 100 (100) 1900056
5
The handwheels of the bronze valves DN 10 and DN 15
as well as DN 20 and DN 25 are identical.
PTFE washers
(washer for valve disc)
for bronze valves 10520..
DN 10 + DN 15 (10) 1902051
DN 20 (10) 1902052
DN 25 (10) 1902053
DN 32 (10) 1902054
DN 40 (10) 1902055
DN 50 (10) 1902056
DN 65 (10) 1902057
DN 80 (10) 1902058
5.36 2017
Stations for heating, cooling, potable water
for dwellings/buildings Content
Page
6.a "Regumat 130/180" DN 20/25/32

Content 6.05
"Regumat S-130" DN 20 - constant temperature heating circuit 6.06
"Regumat M3-130" DN 20 - variable temperature heating circuit 6.07
Accessories for "Regumat S/M3-130" DN 20 6.08
"Regumat S-180" DN 25 with pump ball valve - constant temperature heating circuit 6.13
6
"Regumat M3-180" DN 25 with pump ball valve - variable temperature heating circuit 6.14
Accessories for "Regumat S/M3-180" 6.15
DN 25 with pump ball valve
"Regumat S-180" DN 25 with reduced dimensions - constant temperature heating circuit 6.17
"Regumat M3-180" DN 25 with reduced dimensions - variable temperature heating circuit 6.18
Accessories for "Regumat S/M3-180" DN 25 with reduced dimensions 6.19
"Regumat M4-180" DN 25 - variable temperature heating circuit (four-way mixing valve) 6.23
Accessories for "Regumat S/M3/M4-180" DN 25 6.24
with pump ball valve
6.b "Regumat 220/280" DN 40/50

Content 6.33
Accessories for"Regumat S/M3-220" DN 40 6.35
6.c "Regumat F/FR" Stations for thermally controlled surface heating systems
Content 6.39
"Regumat F-130" DN 25 6.40
"Regumat F-180" DN 25 with pump ball valve 6.41
"Regumat F-180" DN 25 6.42
"Regumat FR-180" DN 25 6.42
Accessories for "Regumat F-130/F-180/FR-180" DN 25 6.43
"Regumat" Heat exchangers 6.44
"Regumat" Heat exchangers - Examples of the application 6.45
Accessories for "Regumat" heat exchangers 6.44
2017 6.01
Page
6.d "Regumat RTA" Stations for solid fuel boilers for return temperature increase
Content 6.47
Summary 6.49
"Regumat RTA-130 VR" DN 25 - supply on the right hand side 6.50
"Regumat RTA-130 VL" DN 25 - supply on the left hand side 6.50
"Regumat RTA-130 TOP" DN 25 - connection from the top 6.50
"Regumat RTA-180" DN 25 6.51
Accessories for "Regumat RTA-130/180" DN 25 6.51
6 "Regumat RTA-180" DN 32 6.52

Accessories for "Regumat RTA-180" DN 32 6.52
Thermal drainage protection device 6.52
6.e Products for heat pump systems

Content 6.53
Products for heat pump systems 6.54
Accessories 6.55
6.f "Regumat S/M3-180" DN 25 for heat meters

Content 6.57
"Regumat S-180" DN 25 for heat meters 6.58
"Regumat M3-180" DN 25 for heat meters 6.58
Heat meter installation set 6.58
Accessories for "Regumat S/M3-180" DN 25 for heat meters 6.59
6.g Accessories for "Regumat"

Content 6.61
Distributor for "Regumat" DN 20 6.62
"Regumat" Module distributor DN 25 6.62
Distributor for "Regumat" DN 32 without pump ball valve 6.62
Distributor for "Regumat" DN 32 with pump ball valve (2013) 6.63
Distributor for "Regumat-220/280" DN 40/50 6.63
Wall consoles 6.63
"HydroFixx" 6.64
Accessories for hydronic headers / distributors 6.66
"Regumat" Tailpipe sets DN 20 6.66
"Regumat" Tailpipe sets DN 40/50 6.68
System illustration 6.70
Thermal insulation 6.69
"Regtronic SV" Sensor distributor 6.72
6.02 2017
Page

Accessories 6.73
High-efficiency pumps 130 mm 6.74
High-efficieny pumps 180 mm 6.74
6.h "Regudis W" Dwelling stations

Content 6.75
General information 6.77
"Regudis W-HTU" Dwelling stations, depth 150 - 175 mm 6.79
"Regudis W-HTU Basic" Dwelling stations, depth 150 - 175 mm 6.82
6
"Regudis W-HTF" Dwelling stations, depth 110 mm 6.83
Covers and cabinets for dwelling stations "Regudis W" 6.87
"Regudis W-HTE" Dwelling stations - electronic control, 6.93
depth 110 mm
Extension modules for "Regudis W-HTE" 6.93
Accessories for "Regudis W-HTE" 6.94
"Regtronic RD-W" System controller 6.95
Accessories for system controller "Regtronic RD-W" 6.95
6.i "Regumaq X/XZ/XH/K" Stations for hot potable water preparation

Content 6.99
"Regumaq X-30" - without circulation connection 6.100
"Regumaq XZ-30" - with circulation connection 6.100
"Regumaq XZ-30" - with circulation connection and high-efficiency circulation pump 6.101
Heat exchangers 6.102
"Regumaq K" Cascade control set for "Regumaq X/XZ-30" 6.103
Accessories for "Regumaq X-/XZ-30" 6.104
"Regumaq X-80" 6.107
Accessories for "Regumaq X-80" 6.107
"Regumaq XH" 6.110
Accessories for "Regumaq XH" 6.111
6.j "Regudis WK" Cooling stations

Content 6.113
"Regudis WK" Transmission station for cooling 6.116
Accessories for transmission station "Regudis WK" 6.116
6.k Further associated products

Content 6.117
"Optibal P" Pump ball valves 6.118
"Optibal" Ball valves 6.118
Insulations 6.118
Thermometer conversion sets 6.118
"Optibal" Ball valves with press connection 6.119
Accessories for the connection of the boiler and 6.120
the storage cylinder to the pipework
2017 6.03
Page
"MSM-Block" Boiler safety device 6.123

Heating system filling station 6.123
"Expa-Con" Valves with lead sealable cap 6.123
"Optiflex" Fill and drain ball valves 6.124
"Optiflex" Fill and drain ball valves for solar 6.125
Accessories 6.125
Ball valves with hose connection 6.125
Fiill and drain ball valves made of bronze 6.126
Draining and venting valves 6.126
6 Fill and drain cocks 6.127
Accessories 6.127
Gauge cocks 6.128
Gauge cock, button type 6.128
Accessories 6.128
Gauge isolating valves 6.129
100
200
300
Accessories 6.129
400
500
Check valves 6.130

"Flowstop" Check valves 6.130
Check valves made of bronze 6.130
Differential pressure relief valves PN 10 6.131
6.04 2017
for dwellings/buildings 6.a "Regumat 130/180" DN 20/25/32
Page
6.a "Regumat 130/180" DN 20/25/32

Content
6
Accessories for "Regumat S/M3-180" 6.15
"Regumat S-180" DN 25 with reduced dimensions - constant temperature heating circuit 6.17
"Regumat M3-180" DN 25 with reduced dimensions - variable temperature heating circuit 6.18
Accessories for "Regumat S/M3-180" DN 25 with reduced dimensions 6.19
"Regumat M4-180" DN 25 - variable temperature heating circuit (four-way mixing valve) 6.23
2017 6.05
6.a "Regumat 130/180" DN 20/25/32
Stations for heating, cooling, potable water "Regumat S-130" DN 20 - constant temperature heating
for dwellings/buildings circuit
a "Regumat S-130" DN 20 - constant temperature heating circuit For the connection of the boiler to the
with universal thermal insulation of modular construction pipework.
and wall mounting device
Max. operating pressure: 10 bar (PN 10)
consisting of: Max. operating temperature for high-
a) isolation device with 2 ball valves, 2 thermometers and efficiency pumps: 95 C
c wall mounting device
c) flanged pipe with check valve Dimensions product assembly:
h) distance piece Distance between pipe centres: 100 mm
h k) thermal insulation Length: 315 mm
k
without pump 1355051 Installation dimensions with thermal
insulation (W x H x D):
230 mm x 360 mm x 190 mm
6 with high-efficiency pump (EEI 0.2)
Connection:
Grundfos ALPHA 2.1 15-60 1355057 To heating circuit:
Wilo-Stratos PICO 15/1-6 1355059 G 1 male thread, flat sealing
To boiler:
G 1 male thread, flat sealing
Model without pump:

Components loosely connected,
individual components leak tested.
Models with high-efficiency pumps:

Components screwed tightly,
product assembly leak tested.
Any standard pump (DN 20, length 130 mm,

G 1 male thread) can be installed.
Note: On delivery, the supply pipe is on the

right hand side. If required, the supply and the
return pipe can be changed on site (see
installation instructions).
Tailpipe sets are available separately:

page 6.66
Heating circuit controller "Regtronic RH" for

weather guided control of the flow
temperature of the heating system:
page 6.71
6.06 2017
6.a "Regumat 130/180" DN 20/25/32
Stations for heating, cooling, potable water "Regumat M3-130" DN 20 - variable temperature heating
a "Regumat M3-130" DN 20 - variable temperature heating circuit For the connection of the boiler to the
with three-way mixing valve with check valve and actuator pipework.
with universal thermal insulation of modular construction Max. operating pressure: 10 bar (PN 10)
and wall mounting device Max. operating temperature for high-
efficiency pumps: 95 C
consisting of:
k a) isolation device with 2 ball valves, 2 thermometers and With three-way mixing valve with check valve
wall mounting device and actuator for flow temperature control in
d
d) three-way mixing valve with check valve and actuator central heating systems with circulation pump.
k) thermal insulation
Dimensions product assembly:
without pump 1355251 Distance between pipe centres: 100 nmm
Length: 315 mm
Installation dimensions with thermal

6
with high-efficiency pump (EEI 0.2)
Grundfos ALPHA 2.1 15-60 1355257 230 mm x 360 mm x 190 mm
Wilo-Stratos PICO 15/1-6 1355259
Connection:
To heating circuit:
To boiler:
Model without pump:





page 6.66

page 6.71
2017 6.07
Stations for heating, cooling, potable water 6.a "Regumat 130/180" DN 20/25/32
for dwellings/buildings Accessories for "Regumat S/M3-130" DN 20
Accessories for "Regumat S/M3-130" DN 20
Thermometer
Replacement thermometer for "Regumat/Regusol" DN 20
blue 1351701
red 1351702
Replacement ball valve for "Regumat-130"

without thermometer, including set of seals
DN 20 1351703
6
Three-way mixing valve for "Regumat M3"
without actuator,
including pipe for the return and set of seals
DN 20 1351704
Actuators For the operation of three- and four-way

mixing valves. As replacement for
"Regumat M3/M4".
24 V (0-10 V) 1350951 Operating time 140 sec., torque 5 Nm

24 V (three point) 1350952 Operating time 140 sec., torque 5 Nm
Adapter 1350296 For "Lineg" actuator.
Adapter 1350297 For "ESBE" actuator.
6.08 2017
6.a "Regumat 130/180" DN 20/25/32
"Regumat S-130" DN 25 - constant temperature heating circuit For the connection of the boiler to the
a consisting of: pipework.
a) isolation device with 2 ball valves and 2 thermometers
(without pressure relief device) Max. operating pressure: 10 bar (PN 10)
c) flanged pipe with check valve Max. operating temperature for high-
h) distance piece efficiency pumps: 85 C
c
k without pump 1355071 Distance between pipe centres: 125 mm
Length: 311 mm
h
with high-efficiency pump (EEI 0.2) Installation dimensions with thermal

Grundfos ALPHA 2.1 25-60 1355073 248 mm x 364 mm x 197 mm
Wilo-Yonos PARA RS 25/6 RKA 1355074
Connection:
6
To heating circuit:
To boiler:
Model without pump:




Tailpipe sets (page 6.67) and a wall

mounting device (page 6.11) are available
separately.

2017 6.09
6.a "Regumat 130/180" DN 20/25/32
"Regumat M3-130" DN 25 - variable temperature heating circuit For the connection of the boiler to the
a with three-way mixing valve with bypass pipework.
with manual presetting and actuator
c a) isolation device with 2 ball valves and 2 thermometers efficiency pumps: 85C
(without pressure relief device)
k
c) flanged pipe with check valve With three-way mixing valve and actuator for
d) three-way mixing valve with actuator flow temperature control in central heating
k) thermal insulation systems with circulation pump.
d
without pump 1355271 The three-way mixing valve is additionally

equipped with a bypass with manual
presetting.
Grundfos ALPHA 2.1 25-60 1355273 Distance between pipe centres: 125 mm
Wilo-Yonos PARA RS 25/6 RKA 1355274 Length: 311 mm

248 mm x 364 mm x 197 mm
Connection:
To heating circuit:
To boiler:
Model without pump:





separately.

6.10 2017
Thermal insulation
with one-piece front insulation shell:
for "Regumat-130" DN 25 1355090 Not suitable for "Regumat 130" DN 25 with

Grundfos ALPHA 2.
Isolation device DN 25 for "Regumat"

with 2 ball valves and 2 thermometers,
2 collar nuts and set of seals 6
DN 25 1353181
Replacement thermometer 1351690

for "Regumat" DN 25-50 as well as for
"Regucirc M" and "Optibal PK"
Insert for differential pressure relief device (bypass) Preset to 200 mbar.
for subsequent conversion
for "Regumat S/M3/M4"
DN 25-130 and DN 25-180 1353390
Wall mounting device for "Regumat"

including fixing material
DN 25-130 and DN 25-180 1352096
"Regumat" Flanged pipe with check valve
DN 25-130 1352296 L = 212 mm. For "Regumat S-130"

(replacement).
DN 25-130 1352275 L = 130 mm. For the conversion of
"Regumat S-130" to "Regumat M3/M4-130".
Three-way mixing valve for "Regumat M3" For flow temperature control.
Manual setting, actuator can be mounted
without actuator, subsequently (only valid for DN 25).
with set of seals Distance between pipe centres: 125 mm
Connection:
DN 25 with manually adjustable bypass 1350281 G 1 male thread x G 1 collar nut
DN 25 without manually adjustable 1350271
bypass
Bronze four-way mixing valve for "Regumat M4" Only as replacement for "Regumat"
without actuator and without manual operating device, DN 32 with "Lineg" actuator
with bypass with manual presetting, manufactured since 2007.
with set of seals
DN 25 1350954
Setting group
for manual setting of the 1651500

three- and four-way mixing valves
2017 6.11
Packing
unit

"Regumat M3/M4".

Set of seals
for three-way mixing valve DN 25 (20) 1350289 For "ESBE" and "Lineg" actuators.
6 Set of seals
for four-way mixing valve DN 25 1350299 For "ESBE" and "Lineg" actuators.
Bypass plug M3 - DN 25 (25) 1350292 For three-way mixing valves with manually
adjustable bypass for closing the bypass
channel.
Regulating insert (spindle) for three-way mixing valve DN 25
with set of seals 1350285 For "ESBE" and "Lineg" actuators (without
adapter).
Regulating insert (spindle) for four-way mixing valve DN 25
with set of seals 1350295 For "ESBE" actuator (without adapter).
with set of seals 1350294 For "Lineg" actuator (without adapter).
6.12 2017
6.a "Regumat 130/180" DN 20/25/32
Stations for heating, cooling, potable water "Regumat S-180" DN 25 with pump ball valve - constant
for dwellings/buildings temperature heating circuit
"Regumat S-180" DN 25 with pump ball valve - constant

a temperature heating circuit For the connection of the boiler to the
b with universal thermal insulation of modular construction. pipework.
c Suitable for the installation of the following
high-efficiency pumps: Max. operating pressure: 10 bar (PN 10)
Max. operating temperature for high-
d
Wilo-Yonos PARA efficiency pumps: 95 C
f
Wilo-Stratos PICO 25/1-4/6
Wilo-Stratos ECO 25/1-5 Dimensions product assembly:
g
Grundfos ALPHA 2.1 25-40/60 Distance between pipe centres: 125 mm
e
Laing series Ecocirc Length: 411 mm
Biral AX 13-1
consisting of: insulation (W x H x D):
248 mm x 465 mm x 213 mm
6
b) wall mounting device Connection:
c) flanged pipe To heating circuit:
d) thermal insulation G 1 male thread, flat sealing
e) check valve To boiler:
f) pump ball valve at the pump inlet G 1 male thread, flat sealing
g) distance piece
Model without pump:
without pump 1357070 Components loosely connected,
with high-efficiency pump (EEI 0.2) Models with high-efficiency pumps:

Wilo-Yonos PARA RS 25/6 RKA 1357072 product assembly leak tested.
Grundfos ALPHA 2.1 25-60 1357073


page 6.67
Heating circuit controller "Regtronic RH"

for weather guided control of the flow
page 6.71
Heating circuit controller extension set

including controller "Regtronic RH" and
bracket for the direct connection to the
station: page 6.16
Heat meter connection set can be installed

subsequently.
Connection of a heat meter G , 110 mm
or G 1, 130 mm: page 6.16
2017 6.13
6.a "Regumat 130/180" DN 20/25/32
Stations for heating, cooling, potable water "Regumat M3-180" DN 25 with pump ball valve - variable
b "Regumat M3-180" DN 25 with pump ball valve - variable For the connection of the boiler to the
temperature heating circuit pipework.
a with three-way mixing valve with check valve and actuator
with universal thermal insulation of modular construction. Max. operating temperature for high-
c Suitable for the installation of the following efficiency pumps: 95 C
high-efficiency pumps:
d With three-way mixing valve and actuator for
Wilo-Yonos PARA flow temperature control in central heating
f Wilo-Stratos PICO 25/1-4/6 systems with circulation pump.
Wilo-Stratos ECO 25/1-5
e Grundfos ALPHA 2.1 25-40/60 Dimensions product assembly:
Laing series Ecocirc Distance between pipe centres: 125 mm
Biral AX 13-1 Length: 411 mm
6 consisting of: Installation dimensions with thermal
a) isolation device with 2 ball valves and 2 thermometers insulation (W x H x D):
(without pressure relief device) 248 mm x 465 mm x 213 mm
b) wall mounting device
c) flanged pipe Connection:
d) thermal insulation To heating circuit:
e) three-way mixing valve with check valve and actuator G 1 male thread, flat sealing
f) pump ball valve at the pump inlet To boiler:
without pump 1357270
Model without pump:
with high-efficiency pump (EEI 0.2) individual components leak tested.
Wilo-Yonos PARA RS 25/6 RKA 1357272 Models with high-efficiency pumps:

Grundfos ALPHA 2.1 25-60 1357273 Components screwed tightly,


The actuator can be mounted without tools -
"plug & play".

page 6.67

page 6.71

station: page 6.16
Heat meter connection set can be installed

subsequently.
Connection of a heat meter G , 110 mm
or G 1, 130 mm: page 6.16
NR24/230 actuators (without mounting

plate) can be fitted to the "Regumat"
stations DN 25 with the help of the mounting
set: page 6.16
6.14 2017
6.a "Regumat 130/180" DN 20/25/32
Stations for heating, cooling, potable water Accessories for "Regumat S/M3-180"
for dwellings/buildings DN 25 with pump ball valve
Accessories for "Regumat S/M3-180"

Thermal insulation
including expanded metal and Oventrop plate
for "Regumat 180" DN 25 1357096
6
Ball valve for isolation device "Regumat S/ M3"
including handle, collar nuts and seals,
without thermometer
1357090
Pump ball valve for "Regumat S/ M3"

including collar nuts and seals
1357089
Thermometer
for "Regumat" DN 25 / DN 32
blue 1357098
red 1357099
including fixing set 1357097
Flanged pipe for "Regumat S/ M3"

1357091
Three-way mixing valve without actuator

1357092
Actuator "Lineg"
including mounting plate and adapter
1357093
2017 6.15
6.a "Regumat 130/180" DN 20/25/32
Stations for heating, cooling, potable water Accessories for "Regumat S/M3-180"
for dwellings/buildings DN 25 with pump ball valve
Packing
unit
a Heating circuit controller extension set for "Regumat 180" DN 25 Controller bracket for the variable direct
with pump ball valve connection of the heating circuit controller
bc "Regtronic RH" on the left or right hand side of
consisting of: 1357290 the station.
a) Heating circuit controller "Regtronic RH" Extension set only suitable for
b) Controller location made of expanded polypropylene "Regumat" DN 25:
c) Controller bracket made of metal including fixing material 1357070/72/73, 1357270/72/73,
1357020/27/29 and 1357220/27/29
Mounting set for actuators NR 24/230

without mounting plate
6 for connection to "Regumat M3-180" DN 25

1350290

"Regumat M3/M4".

Heat meter installation set Only for "Regumat S/M3-180" DN 25 with

pump ball valve.
with integrated temperature sensor connection
at the pump ball valve and adapters.
For heat meters G 1, 130 mm or G , 110 mm.
1352250
Set of seals
for three-way mixing valve DN 25 (20) 1357094
including sleeves and O-rings 1357095
Distance piece
for "Regumat S" 1357086

Check valve
for "Regumat S" 1357087

Adapter (25) 1357088 For "Lineg" actuator.
Adapter (e.g. Hydrometer, Ista, Techem, Minol,

Rossweiner, Grundis, NRZ)
for heat meter installation set with 1352258
temperature sensor 5.2
Adapter (e.g. Allmess)

temperature sensor 6
6.16 2017
6.a "Regumat 130/180" DN 20/25/32
Stations for heating, cooling, potable water "Regumat S-180" DN 25 with reduced dimensions - constant
"Regumat S-180" DN 25 with reduced dimensions - constant For the connection of the boiler to the
temperature heating circuit pipework.
a with universal thermal insulation of modular construction.
b Suitable for the installation of the following Max. operating pressure: 10 bar (PN 10)
c high-efficiency pumps: Max. operating temperature for high-
efficiency pumps: 95 C
d Wilo-Yonos PARA
Wilo-Stratos PICO 25/1-4/6 Dimensions product assembly:
Wilo-Stratos ECO 25/1-5 Distance between pipe centres: 125 mm
e Grundfos ALPHA 2.1 25-40/60 Length: 339 mm
Laing series Ecocirc
Biral AX 13-1 Installation dimensions with thermal
consisting of: 248 mm x 393 mm x 213 mm
(without pressure relief device) Connection:
6
b) wall mounting device To heating circuit:
c) flanged pipe with check valve G 1 male thread, flat sealing
d) thermal insulation To boiler:
f) pump ball valve at the pump inlet G 1 male thread, flat sealing
without pump 1357020* Model without pump:

Grundfos ALPHA 2.1 25-60 1357027* Components screwed tightly,
Wilo-Stratos PICO 25/1-6 1357029* product assembly leak tested.



page 6.67

page 6.71

station: page 6.19

6.a "Regumat 130/180" DN 20/25/32
Stations for heating, cooling, potable water "Regumat M3-180" DN 25 with reduced dimensions - variable
"Regumat M3-180" DN 25 with reduced dimensions - variable For the connection of the boiler to the
a temperature heating circuit pipework.
with three-way mixing valve with check valve and actuator
b Max. operating pressure: 10 bar (PN 10)
c with universal thermal insulation of modular construction. Max. operating temperature for high-
Suitable for the installation of the following efficiency pumps: 95 C
d high-efficiency pumps:
With three-way mixing valve with check valve
Wilo-Yonos PARA and actuator for flow temperature control in
Wilo-Stratos PICO 25/1-4/6 central heating systems with circulation pump.
e Wilo-Stratos ECO 25/1-5
Grundfos ALPHA 2.1 25-40/60 Dimensions product assembly:
Laing series Ecocirc Distance between pipe centres: 125 mm
Biral AX 13-1 Length: 339 mm
6 consisting of: Installation dimensions with thermal
a) isolation device with 2 ball valves and 2 thermometers insulation (W x H x D):
(without pressure relief device) 248 mm x 393 mm x 213 mm
c) flanged pipe Connection:
d) thermal insulation To heating circuit:
e) three-way mixing valve with check valve and actuator G 1 male thread, flat sealing
To boiler:
without pump 1357220* G 1 male thread, flat sealing
Model without pump:

with high-efficiency pump (EEI 0.2) Components loosely connected,
Grundfos ALPHA 2.1 25-60 1357227*
Wilo-Stratos PICO 25/1-6 1357229* Models with high-efficiency pumps:


The actuator can be mounted without tools -
"plug & play".

page 6.67

page 6.71

station: page 6.19
NR24/230 actuators (without mounting

plate) can be fitted to the "Regumat"
stations DN 25 with the help of the mounting
set: page 6.16

6.a "Regumat 130/180" DN 20/25/32
Stations for heating, cooling, potable water Accessories for "Regumat S/M3-180" DN 25 with reduced
for dwellings/buildings dimensions
Packing
unit
Accessories for "Regumat S/M3-180" DN 25 with reduced

dimensions
Ball valve for isolation device "Regumat S/ M3"

including handle, collar nuts and seals,
without thermometer
1357090
Thermometer
6
blue 1357098
red 1357099
including fixing set 1357097
Three-way mixing valve without actuator

1357092
Actuator "Lineg"
including mounting plate and adapter
1357093
1357020/27/29 and 1357220/27/29
Mounting set for actuators NR 24/230

without mounting plate
for connection to "Regumat M3-180" DN 25

1350290

"Regumat M3/M4".

Set of seals
for three-way mixing valve DN 25 (20) 1357094
2017 6.19
6.a "Regumat 130/180" DN 20/25/32
Stations for heating, cooling, potable water Accessories for "Regumat S/M3-180" DN 25 with reduced
for dwellings/buildings dimensions
Packing
unit
including sleeves and O-rings 1357095
Adapter (25) 1357088 For "Lineg" actuator.
6.20 2017
6.a "Regumat 130/180" DN 20/25/32
a with universal thermal insulation of modular construction. pipework.
Suitable for the installation of the following
high-efficiency pumps: Max. operating pressure: 10 bar (PN 10)
Grundfos ALPHA 2.1 25-40/60 efficiency pumps: 95 C
Wilo-Stratos PICO 25/1-4/6 Dimensions product assembly:
Wilo-Yonos PARA Distance between pipe centres: 125 mm
c Laing series Ecocirc Length: 361 mm
k Biral AX 13-1
h as well as standard circulation pumps Installation dimensions with thermal
(asynchronous pumps) insulation (W x H x D):
248 mm x 414 mm x 200 mm
consisting of:
a) isolation device with 2 ball valves and 2 thermometers Connection:
6
(without pressure relief device) To heating circuit:
c) flanged pipe with check valve G 1 male thread, flat sealing
h) distance piece To boiler:
k) thermal insulation G 1 male thread, flat sealing
without pump 1356020 Model without pump:

Grundfos ALPHA 2.1 25-60 1356077 Components screwed tightly,
Wilo-Stratos PICO 25/1-6 1356079 product assembly leak tested.



separately.


6.a "Regumat 130/180" DN 20/25/32
a
with three-way mixing valve with bypass pipework.
with manual presetting and actuator
with universal thermal insulation of modular construction. Max. operating temperature for high-
Suitable for the installation of the following efficiency pumps: 95 C
c high-efficiency pumps:
With three-way mixing valve with actuator for
Grundfos ALPHA 2.1 25-40/60 flow temperature control in central heating
k Wilo-Stratos ECO 25/1-5 systems with circulation pump.
Wilo-Stratos PICO 25/1-4/6
d Wilo-Yonos PARA The three-way mixing valve is additionally
Laing series Ecocirc equipped with a bypass with manual
Biral AX 13-1 presetting.
6 as well as standard circulation pumps
(asynchronous pumps) Dimensions product assembly:
consisting of: Length: 361 mm
(without pressure relief device) Installation dimensions with thermal
c) flanged pipe with check valve insulation (W x H x D):
d) three-way mixing valve with actuator 248 mm x 414 mm x 210 mm
Connection:
without pump 1356220 To heating circuit:
To boiler:
with high-efficiency pump (EEI 0.2) G 1 male thread, flat sealing
Grundfos ALPHA 2.1 25-60 1356277 Model without pump:

Wilo-Stratos PICO 25/1-6 1356279 Components loosely connected,
without pump and actuator 1356223
Oventrop actuators can subsequently be installed.

"Regumat M3-180" without pump: When

installing a high-efficiency pump "Grundfos
ALPHA 2.1" or "Wilo PICO" subsequently,
there may be a collision of pump plug and
actuator.
Pump cable with right angle plug 1358150:
page 6.74


separately.


6.a "Regumat 130/180" DN 20/25/32
for dwellings/buildings circuit (four-way mixing valve)
a (four-way mixing valve) pipework.
with four-way mixing valve with bypass
with manual presetting and actuator Max. operating pressure: 10 bar (PN 10)
with universal thermal insulation of modular construction. efficiency pumps: 95 C
c Suitable for the installation of the following
high-efficiency pumps: With four-way mixing valve with actuator for
flow temperature control in central heating
k Grundfos ALPHA 2.1 25-40/60 systems with circulation pump.
f Wilo-Stratos PICO 25/1-4/6 The four-way mixing valve is additionally
Wilo-Yonos PARA equipped with a bypass with manual
Laing series Ecocirc presetting.
Biral AX 13-1
as well as standard circulation pumps Dimensions product assembly:
6
(asynchronous pumps) Distance between pipe centres: 125 mm
Length: 361 mm
consisting of:
a) isolation device with 2 ball valves and 2 thermometers Installation dimensions with thermal
(without pressure relief device) insulation (W x H x D):
c) flanged pipe with check valve 248 mm x 414 mm x 200 mm
f) four-way mixing valve with actuator
k) thermal insulation Connection:
To heating circuit:
without pump 1356420 G 1 male thread, flat sealing
To boiler:
Components loosely connected.


When installing a high-efficiency pump

"Grundfos ALPHA 2.1" or "Wilo PICO"
subsequently, there may be a collision of pump
plug and actuator.
Pump cable with right angle plug 1358150:
page 6.74


separately.


for dwellings/buildings Accessories for "Regumat S/M3/M4-180" DN 25
Accessories for "Regumat S/M3/M4-180" DN 25
Universal thermal insulation:
for "Regumat-180" DN 25 1356098

without pump ball valve
6
for "Regumat-180" DN 25 with universal thermal insulation
for "Regumat S/M3/M4"
DN 25-130 and DN 25-180 1353390

DN 25-130 and DN 25-180 1352096

without pump ball valve (replacement).
"Regumat S-180" without pump ball valve
to "Regumat M3/M4-180".
Connection:
DN 25 without manually adjustable 1350271
bypass
with set of seals
DN 25 1350954
Setting group

6.24 2017
Packing
unit

"Regumat M3/M4".

Set of seals
Set of seals 6
for four-way mixing valve DN 25 1350299 For "ESBE" and "Lineg" actuators.
channel.
adapter).
with set of seals 1350295 For "ESBE" actuator (without adapter).
with set of seals 1350294 For "Lineg" actuator (without adapter).
2017 6.25
6.a "Regumat 130/180" DN 20/25/32
a
consisting of: pipework.
(without pressure relief device) Max. operating pressure: 10 bar (PN 10)
h) distance piece efficiency pumps: 85 C
without pump 1355072 Distance between pipe centres: 125 mm
Length: 419 mm
c k Installation dimensions with thermal

h insulation (W x H x D):
248 mm x 471 mm x 207 mm
6 Connection:
To heating circuit:
To boiler:




page 6.68


6.a "Regumat 130/180" DN 20/25/32
a with three-way mixing valve and actuator pipework.
consisting of: Max. operating pressure: 10 bar (PN 10)

a) isolation device with 2 ball valves and 2 thermometers Max. operating temperature for high-
(without pressure relief device) efficiency pumps: 85 C
c) flanged pipe with check valve
d) three-way mixing valve with actuator With three-way mixing valve with actuator for
c
k) thermal insulation flow temperature control in central heating
systems with circulation pump.
k
d Distance between pipe centres: 125 mm
Length: 419 mm

6
248 mm x 471 mm x 207 mm
Connection:
To heating circuit:
To boiler:


G 2 male thread) can be installed .


page 6.68


Packing
unit
Accessories for "Regumat S/M3/M4-180" DN 32

for Regumat S/M3/M4
DN 32-180 1353391
6 "Regumat" Flanged pipe with check valve
DN 32-180 1352298 L = 287 mm. For "Regumat S-180" DN 32

(replacement).
"Regumat S-180" DN 32 to
"Regumat M3/M4-180" DN 32.
without actuator, Manual setting, actuator can be mounted
including set of seals subsequently.
DN 32 1350282 Connection:
G 2 male thread x G 2 collar nut
with set of seals
DN 32 1350955

"Regumat M3/M4".

with set of seals (30) 1350293 For "Lineg" actuator (without adapter).
6.28 2017
6.a "Regumat 130/180" DN 20/25/32
Stations for heating, cooling, potable water "Regumat S-180" DN 32 with pump ball valve - constant
"Regumat S-180" DN 32 with pump ball valve - constant For the connection of the boiler to the
with universal thermal insulation of modular construction
b
and wall mounting device Max. operating pressure: 10 bar (PN 10)
consisting of: efficiency pumps: 95 C
c
i (without pressure relief device) Dimensions product assembly:
b) wall mounting device Distance between pipe centres: 125 mm
k h
c) flanged pipe with check valve Length: 445 mm
h) distance piece
i) pump ball valve at the pump inlet Installation dimensions with thermal
k) thermal insulation insulation (W x H x D):
350 mm x 530 mm x 221 mm
Connection:
6
To heating circuit:
To boiler:
Model without pump:

with high-efficiency pump (EEI 0.2) Models with high-efficiency pumps:

Grundfos ALPHA 2.1 32-60 1355076 product assembly leak tested.


page 6.68

page 6.71
2017 6.29
6.a "Regumat 130/180" DN 20/25/32
Stations for heating, cooling, potable water "Regumat M3-180" DN 32 with pump ball valve - variable
"Regumat M3-180" DN 32 with pump ball valve - variable For the connection of the boiler to the
b with three-way mixing valve and actuator
c with universal thermal insulation of modular construction and wall Max. operating temperature for high-
mounting device efficiency pumps: 95 C
k i
d consisting of: With three-way mixing valve and actuator for

a) isolation device with 2 ball valves and 2 thermometers flow temperature control in central heating
(without pressure relief device) systems with circulation pump.
c) flanged pipe with check valve Dimensions product assembly:
d) three-way mixing valve with actuator Distance between pipe centres: 125 mm
i) pump ball valve at the pump inlet Length: 445 mm
6 k) thermal insulation
without pump 1355275 insulation (W x H x D):
350 mm x 530 mm x 221 mm
Connection:
To heating circuit:
To boiler:
Model without pump:

with high-efficiency pump (EEI 0.2) individual components leak tested.
Grundfos ALPHA 2.1 32-60 1355276 Models with high-efficiency pumps:
Wilo-Stratos PICO 30/1-6 1355279 Components screwed tightly,



page 6.68

page 6.71
6.30 2017
6.a "Regumat 130/180" DN 20/25/32
Stations for heating, cooling, potable water Accessories for "Regumat S/M3-180" DN 32
for dwellings/buildings with pump ball valve

Thermometer
blue 1357098
red 1357099
for Regumat S/M3/M4 6
DN 32-180 1353391
Three-way mixing valve for "Regumat M3"

without actuator, including pipe for the return,
collar nut, set of seals and locking device
DN 32 1355299*

"Regumat M3/M4".

High-efficiency pumps 180 mm with connection thread G 2

DN 32
KSB Calio 30-120 180 1358165 For subsequent installation into the
"Regumat S/M3-180" DN 32 with
pump ball valve.
Other circulation pumps on request.
Load relay For the connection of high-performance pumps

(> 1A).
2-phase cabled with the casing 1152089

for dwellings/buildings 6.b "Regumat 220/280" DN 40/50
Page
6.b "Regumat 220/280" DN 40/50

Content
Accessories for"Regumat S/M3-220" DN 40 6.35
2017 6.33
6.b "Regumat 220/280" DN 40/50
a b "Regumat S-220" DN 40 - constant temperature heating circuit For the connection of the boiler to the
c with universal thermal insulation of modular construction pipework.

a) isolating ball valve for the supply pipe with thermometer Max. operating temperature for high-
and draining/flushing valve efficiency pumps: 95 C
b) isolating ball valve for the return pipe with integrated
check valve, thermometer and draining/flushing valve Dimensions product assembly:
c) bracket Distance between pipe centres: 125 mm
f d) pump ball valve with draining/flushing valve Length: 797 mm
e) distance piece
d
f) return pipe Installation dimensions with thermal
g
g) thermal insulation insulation (W x H x D):
428 mm x 850 mm x 340 mm
6 e without pump 1358240 (depending on installed pump)
Connection:
To heating circuit:
G 2 female thread
To boiler:
Pump: flanged connection DN 40
with high-efficiency pump (EEI 0.2) Model without pump:

Wilo-Stratos 40/1-8 1358251 individual components leak tested.
Grundfos MAGNA3 40-100F 1358252
Any standard pump (DN 40, length

220 mm, flanged connection PN 10)
can be installed.
Note: On delivery, the supply pipe is on the left

hand side. If required, the supply and the return
pipe can be changed on site (see installation
instructions).

separately.

6.34 2017
6.b "Regumat 220/280" DN 40/50
"Regumat M3-220" DN 40 - variable temperature heating
Stations for heating, cooling, potable water circuit
for dwellings/buildings Accessories for"Regumat S/M3-220" DN 40
a b "Regumat M3-220" DN 40 - variable temperature heating circuit For the connection of the boiler to the
c with three-way mixing valve and actuator pipework.
a) isolating ball valve for the supply pipe with thermometer
and draining/flushing valve With three-way mixing valve and actuator for
b) isolating ball valve for the return pipe with integrated flow temperature control in central heating
f check valve, thermometer and draining/flushing valve systems with circulation pump.
c) bracket
d d) pump ball valve with draining/flushing valve Dimensions product assembly:
g
e) three-way mixing valve with actuator Distance between pipe centres: 125 mm
(suitable for the standard boiler regulations) Length: 797 mm
e f) return pipe
g) thermal insulation Installation dimensions with thermal
6
without pump 1358340 428 mm x 850 mm x 340 mm
(depending on installed pump)
Connection:
To heating circuit:
G 2 female thread
To boiler:
Model without pump:
Wilo-Stratos 40/1-8 1358351 Components loosely connected,
Grundfos MAGNA3 40-100F 1358352 individual components leak tested.


can be installed.

instructions).

Accessories for"Regumat S/M3-220" DN 40 separately.
Replacement thermometer 1351690 For further information see

for "Regumat" DN 25-50 as well as for "Technical information":
DN 40/50 1352098

"Regumat M3/M4".
230 V for Regumat DN 40/50 1350956 Operating time 140 sec., torque 15 Nm
24 V (0-10 V) for Regumat DN 40/50 1350958 Operating time 140 sec., torque 10 Nm
2017 6.35
6.b "Regumat 220/280" DN 40/50
a b "Regumat S-280" DN 50 - constant temperature heating circuit For the connection of the boiler to the
c with universal thermal insulation of modular construction pipework.

a) isolating ball valve for the supply pipe with thermometer Max. operating temperature for high-
and draining/flushing valve efficiency pumps: 95 C
b) isolating ball valve for the return pipe with integrated
check valve, thermometer and draining/flushing valve Dimensions product assembly:
c) bracket Distance between pipe centres: 125 mm
f d) pump ball valve with draining/flushing valve Length: 797 mm
e) distance piece
d f) return pipe Installation dimensions with thermal
g
g) thermal insulation insulation (W x H x D):
428 mm x 850 mm x 340 mm
6 e without pump 1358540 (depending on installed pump)
Connection:
To heating circuit:
G 2 female thread
To boiler:
with high-efficiency pump (EEI 0.2) Model without pump:

Wilo-Stratos 50/1-12 1358551 individual components leak tested.
Grundfos MAGNA3 50-120F 1358552

can be installed.

instructions).

separately.

6.36 2017
6.b "Regumat 220/280" DN 40/50
"Regumat M3-280" DN 50 - variable temperature heating
Stations for heating, cooling, potable water circuit
a b "Regumat M3-280" DN 50 - variable temperature heating circuit For the connection of the boiler to the
c with three-way mixing valve and actuator pipework.
a) isolating ball valve for the supply pipe with thermometer
and draining/flushing valve With three-way mixing valve and actuator for
b) isolating ball valve for the return pipe with integrated flow temperature control in central heating
f check valve, thermometer and draining/flushing valve systems with circulation pump.
c) bracket
d d) pump ball valve with draining/flushing valve Dimensions product assembly:
g
e) three-way mixing valve with actuator Distance between pipe centres: 125 mm
(suitable for the standard boiler regulations) Length: 797 mm
e f) return pipe
g) thermal insulation Installation dimensions with thermal
6
without pump 1358640 428 mm x 850 mm x 340 mm
(depending on installed pump)
Connection:
To heating circuit:
G 2 female thread
To boiler:
with high-efficiency pump (EEI 0.2) Pump: flanged connection DN 50
Wilo-Stratos 50/1-12 1358651 Model without pump:

Grundfos MAGNA3 50-120F 1358652 Components loosely connected,


can be installed.

instructions).

Accessories for "Regumat S/M3-280" DN 50 mounting device (page 6.37) are available
separately.
for "Regumat" DN 25-50 as well as for For further information see
"Regucirc M" and "Optibal PK" "Technical information":
DN 40/50 1352098

"Regumat M3/M4".
230 V for Regumat DN 40/50 1350956 Operating time 140 sec., torque 15 Nm
24 V (0-10 V) for Regumat DN 40/50 1350958 Operating time 140 sec., torque 10 Nm
2017 6.37
Stations for heating, cooling, potable water 6.c "Regumat F/FR" Stations for thermally controlled surface
for dwellings/buildings heating systems
Page
6.c "Regumat F/FR" Stations for thermally controlled surface heating systems
Content
"Regumat F-130" DN 25 6.40
"Regumat F-180" DN 25 with pump ball valve 6.41
"Regumat F-180" DN 25 6.42
"Regumat FR-180" DN 25 6.42
Accessories for "Regumat F-130/F-180/FR-180" DN 25 6.43
"Regumat" Heat exchangers - Examples of the application 6.45
6
Accessories for "Regumat" heat exchangers 6.44
2017 6.39
6.c "Regumat F/FR" Stations for thermally controlled surface
Stations for heating, cooling, potable water heating systems
for dwellings/buildings "Regumat F-130" DN 25
Regumat F-130 and Regumat F-180 for thermally controlled surface heating systems
Regumat FR-180 with high-efficiency pump made of bronze or stainless steel for thermally controlled open vented
surface heating systems
Ingeneral,theunitisusedincombinationwiththeheatexchangerRegumat.
Allmodeswithorwithouthigh-efficiencypump,isolationdevicewithballvalves,thermometersandconnectionforimmersionsensor,temperature
controllerwithimmersionsensor,flangedpipewithcheckvalve,three-waymixingvalve,electronictemperaturecontrollerandthermalinsulation.
ThemodelRegumatF-180isadditionallyequippedwithapumpballvalveatthepumpinlet.
RegumatFDN25
Modelwithcastironpump Modelwithstainlesssteel/bronzepump
RegumatF-130 RegumatF-180 RegumatFR-180
Cataloguepage 6.41 6.42
6 Withpumpballvalveatthepumpinlet X
Fixedvaluecontrolunitforsealedsystems X
Fixedvaluecontrolunit
X
foropenventedsystems
H=364mm H=512mm H=414mm
Installationdimensionwiththermalinsulation W=248mm W=248mm W=248mm
D=197mm D=200mm D=200mm
6.40 2017
heating systems
Stations for heating, cooling, potable water "Regumat F-130" DN 25
for dwellings/buildings "Regumat F-180" DN 25 with pump ball valve
a
"Regumat F-130" DN 25 Fixed value control unit "Regumat F-130" for
Fixed value control unit flow temperature control and limitation in
to maintain the flow temperature combined radiator/surface heating
of underfloor and wall heating systems systems. The flow temperature is controlled
f with the help of a three-way mixing valve in
k
c consisting of: combination with a temperature controller with
a) isolation device with 2 ball valves and 2 thermometers immersion sensor.
b (without pressure relief device) Control range: 20 - 50 C
d and connection for immersion sensor
b) temperature controller with immersion sensor Max. operating pressure: 10 bar (PN 10)
e d) three-way mixing valve efficiency pumps: 85 C
e) electronic pipe contact safety switch
f) high-efficiency pump (cast iron) Distance between pipe centres: 125 mm
Connection:
6
without pump 1354171 To heating circuit:
To boiler:
with high-efficiency pump (EEI 0.2) G 1 male thread, flat sealing
Grundfos ALPHA 2.1 25-60 1354165 Tailpipe sets (page 6.67) and a wall
separately.
"Regumat F-180" DN 25 with pump ball valve As "Regumat F-130" but with pump length
a
Fixed value control unit 180 mm and additional pump ball valve at
to maintain the flow temperature the pump inlet.
of underfloor and wall heating systems
with universal thermal insulation of modular construction Max. operating temperature for high-
f efficiency pumps: 95 C
consisting of:
k a) isolation device with 2 ball valves and 2 thermometers For further information see
c (without pressure relief device) "Technical information":
i and connection for immersion sensor
b) temperature controller with immersion sensor
d) three-way mixing valve
d b
f) high-efficiency pump (cast iron)
i) pump ball valve
e k) thermal insulation

without pump and thermostatic 1354272

temperature controller
Further temperature controllers with

different control ranges: page 3.81
2017 6.41
heating systems
Stations for heating, cooling, potable water "Regumat F-180" DN 25
for dwellings/buildings "Regumat FR-180" DN 25
a
"Regumat F-180" DN 25 As "Regumat F-180", item no. 1354270, but
Fixed value control unit without pump ball valve.
to maintain the flow temperature
of underfloor and wall heatings Max. operating temperature for high-
c k with universal thermal insulation of modular construction efficiency pumps: 95 C
consisting of:
d b and connection for immersion sensor
e d) three-way mixing valve
6 k) thermal insulation
without pump and pump ball valve 1354070*
a "Regumat FR-180" DN 25 As "Regumat F-180", item no. 1354270, but

Fixed value control unit without pump ball valve. With stainless steel/
to maintain the flow temperature bronze pump instead of cast iron pump.
k of open vented underfloor and wall heating systems
c with universal thermal insulation of modular construction Max. operating temperature for high-
f efficiency pumps: 95 C
consisting of:
a) isolation device with 2 ball valves and 2 thermometers Tailpipes sets (page 6.67) and a wall
d (without pressure relief device) mounting device (page 6.43) are available
b and connection for immersion sensor separately.
e
d) three-way mixing valve
f) high-efficiency pump (stainless steel/bronze)
Grundfos ALPHA 2.1 25-60N 1354087

Wilo-Stratos PICO 25/1-6 RG 1354097
High-efficiency pumps 180 mm with connection thread G 1 For replacement purposes or for upgrading the
DN 25 "Regumat 180" stations without pump, for
open vented systems.
Grundfos ALPHA 2.1 180 1357159 with stainless steel body

25-60N
Wilo-Stratos PICO 180 1357160 with bronze body
25/1-6 RG

for dwellings/buildings Accessories for "Regumat F-130/F-180/FR-180" DN 25
Accessories for "Regumat F-130/F-180/FR-180" DN 25
Thermal insulation

Grundfos ALPHA 2.
for "Regumat-180" DN 25 1356097 6

for "Regumat-180" DN 25 1356098
Isolation device DN 25 for "Regumat"

with 2 ball valves and 2 thermometers,
2 collar nuts and set of seals
DN 25 1353181


Pump ball valve For the connection of the boiler to the

with integrated check valve pipework.
PN 10
DN 25 1353771
For the supply pipe: red handle
Installation at the pump inlet.

DN 25-130 and DN 25-180 1352096

"Regumat S-180" without pump ball valve
"Regumat S-180" with pump ball valve
2017 6.43
heating systems
Stations for heating, cooling, potable water "Regumat" Heat exchangers
for dwellings/buildings Accessories for "Regumat" heat exchangers

5 4 3
oventrop
20 - 50 C 2m 1142861
30 - 60 C 2m 1142862
40 - 70 C 2m 1142863
50 - 80 C 2m 1142864
"Regumat" Heat exchangers Modular complement to the boiler connection

High-capacity plate heat exchangers systems "Regumat-130/180" DN 25 with a
distance of 125 mm between pipe centres.
6 with connection fitting System separation with plate heat exchanger
for the separation of different product groups
14 plates up to 14 kW 1351596 and individual components for:
30 plates up to 28 kW 1351696 - surface and underfloor heating/cooling
- storage cylinder loading
The performance dates are determined by the fixed default values - fresh water loading
in the primary circuit (70/50 C) and secondary circuit (40/50 C). Connection distance: 125 mm
One port 2 x pump flange with collar nut G 1,
one port 2 x G 1 male thread with additional
lateral connection devices, including insulation.

page 6.67
without connection fitting Connection distance: 466 mm x 50 mm

for higher performance ranges 4 x G 1 flat sealing
20 plates up to about 40 kW 1351790 As replacement for "Regusol X-15".

30 plates up to about 55 kW 1351791 As replacement for "Regusol X-25" and
"Regumaq".
40 plates up to about 70 kW 1351792
The performance dates are determined by the fixed default values

in the primary circuit (80/60 C) and secondary circuit (50/70 C).
Accessories for "Regumat" heat exchangers
Thermal insulation made of expanded polystyrene
for heat exchangers 1351790/91 1359591

For the protection of pressurized systems.

Safety group 1351598 For the connection to the heat exchanger
2
4 6
with diaphragm safety valve 3 bar, Regumat.

0 bar
pressure gauge, fill and drain cock and
connection facility for an expansion tank
Set of connection fittings For the connection of the heat exchanger

Regumat to a pump group Regumat on
G 1 female thread x pump flange for 1351597 the boiler side.
G 1 with collar nuts and seals
6.44 2017
for dwellings/buildings "Regumat" Heat exchangers - Examples of the application
Example 1: For the extension of existing heating circuits

a Regumat FR-180 DN 25 by a heat exchanger and a fixed value
with Grundfos pump control unit in open vented surface heating
ALPHA 2.1 25-60 N 1354087 systems.
with Wilo pump Installation dimensions:
Stratos PICO 25/1-6 RG 1354097 H = 640 mm, W = 250 mm
b Heat exchanger Regumat

with 14 plates up to 14 kW 1351596
c Safety group 1351598
d Tailpipe set 13504..
Example 2: Please observe: 6

a Regumat S-180 DN 25 When changing the supply, change both pumps.
without pump 1356020 Delivered with supply on the right hand side.
Installation dimensions:
b Heat exchanger Regumat H = 960 mm, W = 250 mm
with 30 plates up to 28 kW 1351696
c Safety group 1351598
d Tailpipe set 13504..
e High-efficiency pump with

stainless steel/bronze body 180 mm
Grundfos ALPHA 2.1 25-60 N 1357159
Wilo-Stratos PICO 25/1-6 RG 1357160
f Regumat M3-180 DN 25
with Grundfos pump
ALPHA 2.1 25-60 1356277
with Wilo pump
Stratos PICO 25/1-6 1356279
g Set of connection fittings 1351597
2017 6.45
Stations for heating, cooling, potable water 6.d "Regumat RTA" Stations for solid fuel boilers for return
for dwellings/buildings temperature increase
Page
6.d "Regumat RTA" Stations for solid fuel boilers for return temperature increase
Content
Summary 6.49
"Regumat RTA-130 VR" DN 25 - supply on the right hand side 6.50
"Regumat RTA-130 VL" DN 25 - supply on the left hand side 6.50
"Regumat RTA-130 TOP" DN 25 - connection from the top 6.50
Accessories for "Regumat RTA-130/180" DN 25 6.51
6
Accessories for "Regumat RTA-180" DN 32 6.52
Thermal drainage protection device 6.52
2017 6.47
6.d "Regumat RTA" Stations for solid fuel boilers for return
Stations for heating, cooling, potable water temperature increase
for dwellings/buildings System illustration
Regumat M-130 Regumat F-130
6
Distributor/header
combination HydroFixx
Regumat RTA-180
MSM-Block
Boiler safety device Expa-Con
Valve with lead sealable cap
Thermal drainage
protection device
System Illustration: Connection of Regumat RTA to a solid fuel installation (e.g. pellets) and two heating circuits
6.48 2017
Stations for heating, cooling, potable water temperature increase
for dwellings/buildings Summary
Solid fuel boiler connection systems Regumat RTA

Choice of the Regumat RTA systems
Product assembly DN 25/DN 32 for pump lengths 130/180 mm
All models with or without high-efficiency pump, ball valve with thermometer, ball valve with thermometer and connection for immersion sensor
(Regumat RTA-180 DN 25 with housing for immersion sensor with thermometer), three-way mixing valve, temperature controller with
immersion sensor, flanged pipe with check valve and thermal insulation.
Models for solid fuel boilers

Regumat RTA
Regumat RTA-130 Regumat RTA-130 VL Regumat RTA-130 Top Regumat RTA-180
Catalogue Page 6.50 6.50 6.50 6.51 6.51
Size DN 25 DN 25 DN 25 DN 25 DN 32
Boiler connection from below X X X X 6

Boiler connection from the top X
Supply on right hand side X X X X
Supply on left hand side X
Pump length L = 130 mm L = 130 mm L = 130 mm L = 180 mm L = 180 mm
Standard thermal insulation

H = 513 mm
W = 248 mm
H = 364 mm D = 211 mm H = 471 mm
Installation dimension
W = 248 mm W = 248 mm
with thermal insulation Universal thermal insulation
D = 197 mm D = 207 mm
H = 414 mm
W = 248 mm
D = 200 mm
Tailpipe sets are available separately.
2017 6.49
temperature increase
"Regumat RTA-130 VR" DN 25 - supply on the right hand side
Stations for heating, cooling, potable water "Regumat RTA-130 VL" DN 25 - supply on the left hand side
for dwellings/buildings "Regumat RTA-130 TOP" DN 25 - connection from the top
c "Regumat RTA-130 VR" DN 25 - supply on the right hand side For the connection of the solid fuel boiler to the
d
with integrated three-way mixing valve pipework.
with temperature controller for Pump length: 130 mm
return temperature increase
Supply on the right hand side Max. operating pressure: 10 bar (PN 10)
e Max. operating temperature for high-
a consisting of: efficiency pumps: 85 C
a) high-efficiency pump
b) ball valve with thermometer Dimensions product assembly:
g
c) three-way mixing valve Distance between pipe centres: 125 mm
f b d) temperature controller with immersion sensor Length: 364 mm
control range 40-70 C
e) flanged pipe with check valve Installation dimensions with thermal
f) ball valve with thermometer and connection for immersion sensor insulation (W x H x D):
6 g) thermal insulation 310 mm x 364 mm x 197 mm
with high-efficiency pump (EEI 0.2) 1354795 Connection:

Wilo-Yonos PARA RS 25/6 RKC To heating circuit:
To boiler:
For return temperature control of solid fuel and

c "Regumat RTA-130 VL" DN 25 - supply on the left hand side pellet boilers.
d as "Regumat RTA-130 VR" but supply on the left hand side
The return temperature is increased to the set
consisting of: value with the help of a three-way mixing valve
e a) high-efficiency pump in combination with a temperature controller
a b) ball valve with thermometer (control range 40 C-70 C) with immersion
c) three-way mixing valve sensor.
d) temperature controller with immersion sensor
e) flanged pipe with check valve Tailpipe sets (page 6.67) and a wall
g mounting device (page 6.51) are available
b f f) ball valve with thermometer and connection for immersion sensor
g) thermal insulation separately.

with high-efficiency pump (EEI 0.2) 1354798
Wilo-Yonos PARA RS 25/6 RKC
g
"Regumat RTA-130 TOP" DN 25 - connection from the top
f b as "Regumat RTA-130 VR" but boiler is connected from the top
consisting of:
b) ball valve with thermometer
a
c) three-way mixing valve
e d) temperature controller with immersion sensor
e) flanged pipe with check valve
d c
f) ball valve with thermometer and connection for immersion sensor
g) thermal insulation
with high-efficiency pump (EEI 0.2) 1354783

Wilo-Yonos PARA RS 25/6 RKC
6.50 2017
Stations for heating, cooling, potable water "Regumat RTA-180" DN 25
for dwellings/buildings Accessories for "Regumat RTA-130/180" DN 25
"Regumat RTA-180" DN 25 For the connection of the solid fuel boiler to the
b with temperature controller for Pump length: 180 mm
d
c consisting of: Max. operating temperature for high-
e
a) high-efficiency pump efficiency pumps with standard
a
b) ball valve with thermometer thermal insulation: 85 C
c) three-way mixing valve Max. operating temperature for high-
d) temperature controller with immersion sensor efficiency pumps with universal
control range 40-70 C thermal insulation of modular construction:
e) flanged pipe with check valve 95 C
f g f) housing for immersion sensor with thermometer
g) thermal insulation Dimensions product assembly:

Length:
6
460 mm (with standard insulation)
371 mm (with universal insulation)
Connection:
Grundfos ALPHA 2.1 25-60 1354693 To heating circuit:
To boiler:
d c "Regumat RTA-180" DN 25
with integrated three-way mixing valve
with temperature controller for
For return temperature control of solid fuel and
pellet boilers.
with universal thermal insulation of modular construction
The return temperature is increased to the set
value with the help of a three-way mixing valve
a e consisting of:
in combination with a temperature controller
g a) high-efficiency pump
(control range 40 C-70 C) with immersion
sensor.
c) three-way mixing valve
f b d) temperature controller with immersion sensor
e) flanged pipe with check valve
separately.
f) ball valve with thermometer and connection for immersion sensor

Wilo-Yonos PARA RS 25/6 RKC 1354587
Accessories for "Regumat RTA-130/180" DN 25



DN 25-130 and DN 25-180 1352096
Mixing valve group
as replacement for 1350260

"Regumat RTA-130/180" DN 25
2017 6.51
"Regumat RTA-180" DN 32
Stations for heating, cooling, potable water Accessories for "Regumat RTA-180" DN 32
for dwellings/buildings Thermal drainage protection device
c "Regumat RTA-180" DN 32 For the connection of the solid fuel boiler to the
d
with temperature controller for Pump length: 180 mm
a consisting of: Max. operating temperature for high-
e a) high-efficiency pump efficiency pumps: 85 C
c) three-way mixing valve Dimensions product assembly:
d) temperature controller with immersion sensor Distance between pipe centres: 125 mm
control range 40-70 C Length: 419 mm
f b
g e) flanged pipe with check valve
f) ball valve with thermometer and connection for immersion sensor Connection:
g) thermal insulation To heating circuit:
To boiler:
Wilo-Yonos PARA RS 30/6 RKC 1354571 For return temperature control of solid fuel and
pellet boilers.
Further temperature controller with different control ranges:
page 3.81 The return temperature is increased to the set
value with the help of a three-way mixing valve
in combination with a temperature controller
(control range 40 C-70 C) with immersion
Accessories for "Regumat RTA-180" DN 32 sensor.
Replacement thermometer 1351690 For further information see

for "Regumat" DN 25-50 as well as for "Technical information":
Thermal drainage protection device Application:

for "Regumat RTA" For thermal protection of solid fuel boilers in
closed hot water heating systems according to
DN 20 1354699 DIN EN 12828.
Tested according to DIN 3440.
Response temperature: 95 C
Max. heating capacity: 90 kW
Length of capillary with protective pipe: 1.3 m
Both ports female thread Rp .
Immersion pocket G connection.

for dwellings/buildings 6.e Products for heat pump systems
Page
6.e Products for heat pump systems

Content
Products for heat pump systems 6.54
Accessories 6.55
2017 6.53
Products for heat pump systems
Buffer storage cylinder connection group For the connection of a heat pump to the
for heat pumps heating system and a buffer storage cylinder.
with connection set for safety group for diaphragm expansion tank
Max. operating pressure 10 bar: (PN 10)
-isolation device with 2 ball valves and efficiency pumps: 95 C
2 thermometers (without pressure relief device)
-pump ball valve at the pump inlet Dimensions product assembly:
-thermal insulation Distance between pipe centres: 125 mm
-connection set for safety group for diaphragm expansion tank Length: 588 mm
-high-efficiency pump Wilo PICO 25/1-6
-connection elbow G Connection:
6 1356872
To heating circuit:
To boiler:

Heating circuit connection group For the connection of a heat pump to the
for heat pumps heating system.
with connection set for safety group for diaphragm expansion tank
Tailpipes sets (page 6.67) and a wall
consisting of: mounting device (page 6.55) are available
-isolation device with 2 ball valves and separately.
2 thermometers (without pressure relief device)
-flanged pipe with check valve
-distance piece
-pump ball valve at the pump inlet
-thermal insulation
-connection set for safety group for diaphragm expansion tank
-high-efficiency pump Wilo PICO 25/1-6
1356972
Connection set for safety group With the option to connect the safety group.
for diaphragm expansion tank
1356989
For the protection of pressurized systems.

Safety group 1351598 For the connection to the heat exchanger
2
4 6
with diaphragm safety valve 3 bar, Regumat.

0 bar
pressure gauge, fill and drain cock and
connection facility for an expansion tank
6.54 2017
Stations for heating, cooling, potable water 6.e Products for heat pump systems
for dwellings/buildings Accessories
Accessories


PN 10
DN 25 1353771
Installation at the pump inlet. 6

DN 25-130 and DN 25-180 1352096

with pump ball valve (replacement).
2017 6.55
Regusol Connection set for diaphragm expansion tank Fortheconnectionofadiaphragm

consistingof: expansiontanktothesolarstation
angledwallbracketmadeofsteel Regusol,
quick-couplingfordiaphragmexpansiontank page9.56
flexiblehose
Regusol Filling and flushing device Forfillingandflushingofheating

G1malethreadxG1malethread systems,
page9.33
6
Expa-Con Valve Forcontrol,maintenanceandpossible
withleadsealablecapbrass replacementofdiaphragmexpansion
tanks,
page6.123
MSM-Block Boiler safety device Completesafetygroupaccordingto

airventwithautomaticshut-off DINEN12828,
pressuregaugewithautomaticshut-off page6.123
insulation
DN25,G1femalethread
Strainer Forheatingandcoolingcircuits,
bronze page5.32
withsimplewirebasket
6.56 2017
for dwellings/buildings 6.f "Regumat S/M3-180" DN 25 for heat meters
Page

Content
"Regumat S-180" DN 25 for heat meters 6.58
"Regumat M3-180" DN 25 for heat meters 6.58
Heat meter installation set 6.58
Accessories for "Regumat S/M3-180" DN 25 for heat meters 6.59
2017 6.57
"Regumat S-180" DN 25 for heat meters
Stations for heating, cooling, potable water "Regumat M3-180" DN 25 for heat meters
for dwellings/buildings Heat meter installation set
Packing
unit
a "Regumat S-180" DN 25 for heat meters For measurement of heat consumption in

For the installation of a heat meter G 1, 130 mm or G , 110 mm, heating systems.
with spacer made of plastic, 110 mm long
e f consisting of: Distance between pipe centres: 125 mm
a) isolation device with 2 ball valves and 2 thermometers Length: 460 mm
b) ball valve with check valve
e c) distance piece With universal thermal insulation element
d d) pump ball valve at the pump inlet featuring perforated cut edges for a direct
b
g e) adapter G and G 1 adaptation to the heat meter.
f) plug for temperature sensor M 10 x 1.0
g) thermal insulation When choosing the suitable heat meter, the
c c technical specifications of the manufacturer
without pump and heat meter 1356050 must be observed.
6 Oventrop recommends the use of ultrasonic
heat meters.
a "Regumat M3-180" DN 25 for heat meters Adapters for fixing of the temperature sensors
For the installation of a heat meter G 1, 130 mm or G , 110 mm, item no. 1352258/59: page 6.60
with spacer made of plastic, 110 mm long
e f
consisting of:
b) ball valve with check valve
e c) three-way mixing valve with actuator
d) pump ball valve at the pump inlet
b d
g e) adapter G and G 1
f) plug for temperature sensor M 10 x 1.0
c
without pump and heat meter 1356250
Heat meter installation set

with plug for the fixing of a temperature sensor M 10 x 1.0,
for heat meters G 1, 130 mm or G , 110 mm,
for "Regumat 180" DN 25 with ball valve at the pump inlet
for "Regumat S-180" 1350443

for "Regumat M3/M4-180" 1350444
Plug for heat meter installation set for fixing of a temperature sensor
M 10 x 1.0 (25) 1350490
Heat meter installation set Only for "Regumat S/M3-180" DN 25 with

pump ball valve.
with integrated temperature sensor connection
at the pump ball valve and adapters.
For heat meters G 1, 130 mm or G , 110 mm.
1352250
6.58 2017
Stations for heating, cooling, potable water 6.f "Regumat S/M3-180" DN 25 for heat meters
for dwellings/buildings Accessories for "Regumat S/M3-180" DN 25 for heat meters
Packing
unit
Accessories for "Regumat S/M3-180" DN 25 for heat meters
for "Regumat-180" DN 25 1356097

6

PN 10
DN 25 1353771
Installation at the pump inlet.

DN 25-130 and DN 25-180 1352096
Connection:
Setting group


"Regumat M3/M4".

Set of seals
2017 6.59
Stations for heating, cooling, potable water 6.f "Regumat S/M3-180" DN 25 for heat meters
for dwellings/buildings Accessories for "Regumat S/M3-180" DN 25 for heat meters
Packing
unit
channel.
adapter).
Adapter (e.g. Hydrometer, Ista, Techem, Minol,

Rossweiner, Grundis, NRZ)
temperature sensor 5.2
6
Adapter (e.g. Allmess)

temperature sensor 6
6.60 2017
for dwellings/buildings 6.g Accessories for "Regumat"
Page

Content
"Regumat" Module distributor DN 25 6.62
Distributor for "Regumat" DN 32 without pump ball valve 6.62
Distributor for "Regumat" DN 32 with pump ball valve (2013) 6.63
Distributor for "Regumat-220/280" DN 40/50 6.63
Wall consoles 6.63
6
"HydroFixx" 6.64
Accessories for hydronic headers / distributors 6.66
"Regumat" Tailpipe sets DN 40/50 6.68
Thermal insulation 6.69
"Regtronic SV" Sensor distributor 6.72
Accessories 6.73
High-efficiency pumps 130 mm 6.74
High-efficieny pumps 180 mm 6.74
2017 6.61
Distributor for "Regumat" DN 20
Stations for heating, cooling, potable water Distributor for "Regumat" DN 25
for dwellings/buildings "Regumat" Module distributor DN 25
Packing
unit
Distributor for "Regumat" DN 20 Connection to the heating circuit:

made of steel G 1 collar nut
with insulation and wall bracket Connection to the boiler:
for 2 heating circuits 1351482
for 3 heating circuits 1351483 Max. operating pressure: 4 bar
Max. operating temperature: 110 C
Max. flow rate: 2.5 m/h
Distributor for "Regumat" DN 25 Connection to the heating circuit:
with insulation G 1 collar nut
Connection to the boiler:
for 2 heating circuits DN 25 1351571
made of bronze Max. flow rate: 4 m/h
6
Wall bracket (10) 1351592
for 2-fold distributor made of bronze
made of steel Connection to the heating circuit:

G 1 collar nut, flat sealing
for 2 heating circuits DN 25 1351582 Connection to the boiler:
for 3 heating circuits DN 25 1351583 G 1 male thread, flat sealing
for 4 heating circuits DN 25 1351584 Including wall bracket for Regumat with
for 5 heating circuits DN 25 1351585 a distance of 125 mm between pipe centres
for 6 heating circuits DN 25 1351586 and insulation. Distributors for 9 heating
for 7 heating circuits DN 25 1351587 circuits and more on request.
for 8 heating circuits DN 25 1351588 Max. flow rate: 4 m/h
Compact distributor Connection to the heating circuit:

made of steel G 1 collar nut, flat sealing
for 3 heating circuits DN 25 1351783 G 1 male thread, flat sealing
for 5 heating circuits DN 25 1351785 Including wall bracket for "Regumat" with a
distance of 125 mm between pipe centres and
insulation.
"Regumat" Module distributor DN 25 Heating distributor system of modular

made of brass construction:
with insulation subsequently extendable
up to 6 groups can be connected to the
for 2 heating circuits 1351471 boiler and heating circuit
for 3 heating circuits 1351472 Connection to the heating circuit:
G 1 collar nut
Extension module G 1 male thread, flat sealing
Max. flow rate: 4 m/h
with insulation 1351470
Wall bracket for 2-fold module distributor "Regumat"
made of steel (10) 1351593

Distributor for "Regumat" DN 32 without pump ball valve Connection to the heating circuit:
R 2 male thread, flat sealing
for 2 heating circuits 1351682 For the connection (right/left) to the boiler
for 3 heating circuits 1351683 without crossing.
For the old model "Regumat" DN 32.

Stations for heating, cooling, potable water Distributor for "Regumat-220/280" DN 40/50
for dwellings/buildings Wall consoles
Distributor for "Regumat" DN 32 with pump ball valve (2013) Connection to the heating circuit:
for 3 heating circuits 1351673 Max. flow rate: 9 m/h
for 4 heating circuits 1351674 Max. flow rate: 12 m/h

Distributor for "Regumat-220/280" DN 40/50 Distributor for "Regumat-220/280" with a

made of steel
with insulation
distance of 180 mm between pipe centres.
6
Connection to the heating circuit:
for 2 heating circuits 1351692 G 2 collar nut, flat sealing
for 3 heating circuits 1351693 Connection to the boiler:
for 4 heating circuits 1351694 flanged DN 80

Mounting legs
for distributors/"HydroFixx" DN 40/50
infinitely adjustable height 285-480 mm 1351697 "Technical information":
Wall consoles
for distributors/"HydroFixx" DN 40/ 50
distance to wall infinitely adjustable between 165 and 235 mm

1351695
Sealing plug set For closing a pair of heating circuits at the

2-fold distributor.
DN 25, G 1 1351770
DN 32, G 2 1351771
2017 6.63
Stations for heating, cooling, potable water 6.g Accessories for "Regumat"
for dwellings/buildings "HydroFixx"
"HydroFixx" Distributor with horizontal integrated hydronic

Hydronic header / distributor combination header, compact construction, made of steel.
"HydroFixx" for "Regumat" DN 20 Connection to the heating circuit:

Max. flow rate: 2.5 m3/h
6
"HydroFixx" for "Regumat" DN 25 For the connection of Regumat DN 25
made of steel with a distance of 125 mm between pipe
with insulation and wall bracket centres.

"HydroFixx" for "Regumat" DN 32 without pump ball valve For the connection of Regumat DN 32
Max. flow rate: 7.5 m/h
For the old model "Regumat" DN 32.
"HydroFixx" for "Regumat" DN 32 with pump ball valve (2013) For the connection of "Regumat" DN 32 (2013)

for dwellings/buildings "HydroFixx"
"HydroFixx" for "Regumat" DN 40/50 For the connection of Regumat DN 40/50

with insulation centres.
flanged DN 80

Hydronic header For the hydronic decoupling of heating and

made of steel boiler circuit.
with insulation
DN 25 1351590 Max. flow rate: 4 m/h

connection G 1 male thread,
flat sealing
DN 32 1351591 Max. flow rate: 8 m/h
connection R 2 male thread
"MonoFixx" for "Regumat" DN 25 For the hydronic decoupling of heating and

made of steel boiler circuit.
with insulation and wall bracket For the connecton of a "Regumat" DN 25
with a distance of 125 mm between pipe
for one heating circuit 1351589 centres.
G 1 collar nut
2017 6.65
Stations for heating, cooling, potable water Accessories for hydronic headers / distributors
for dwellings/buildings "Regumat" Tailpipe sets DN 20
Packing
unit
Accessories for hydronic headers / distributors
Connection fitting
for "Regumat RTA" (10) 1351655

below the distributor
2 x G 1 female thread/installation length 45 mm
Set = 2 pieces
Reducers
for connection of a distributor 1351654 From centre distance 125 to 100.

DN 25 to a "Regumat" DN 20
6 G 1 male thread x G 1 collar nut, set = 2 pieces
for connection of a distributor (10) 1351652
DN 32 to a "Regumat" DN 25
G 2 male thread x G 1 collar nut
DN 40/50 to a "Regumat" DN 25
G 2 male thread x G 1 collar nut, set = 2 pieces
DN 40/50 to a "Regumat" DN 32
G 2 male thread x G 2 collar nut, set = 2 pieces
for connection of a "Regumat" (25) 1351651

DN 32 without pump ball valve
to a distributor DN 25
"Regumat" Tailpipe sets DN 20 Required for the connection of the pipework to

the heating circuit and for the connection of the
Set of weldable tailpipes "Regumat" DN 20 and "Regumaq" with G 1
connection to the boiler, including ring gaskets.
2-fold: (10) 1350445
collar nut G 1, weldable tailpipe
Set of solder tailpipes, 22 mm
2-fold: (10) 1350446

collar nut G 1, solder tailpipe
Set of threaded tailpipes R
2-fold: (10) 1350448

collar nut G 1, threaded tailpipe
Press connection set 26 x 3 mm
2-fold: (10) 1350449

collar nut G 1, press connection
Connection set, system Mapress 22 mm
2-fold: (10) 1350435

Connection set, system Viega Sanpress 22 mm
2-fold: (10) 1350436

Connection set Rp
2-fold: (10) 1350447

collar nut G 1, nipple
6.66 2017
for dwellings/buildings "Regumat" Tailpipe sets DN 25
Packing
unit
"Regumat" Tailpipe sets DN 25 Required for the connection of the pipework

to the heating circuit and for the connection
Weldable tailpipe sets of the "Regumat DN 25-130/180" to the
boiler, without ring gaskets (come with the
2-fold: collar nut G 1, weldable tailpipe 1350455 "Regumat").
4-fold: collar nut G 1, weldable tailpipe 1350465
Solder tailpipe sets 28 mm
2-fold: collar nut G 1, solder tailpipe 1350456

4-fold: collar nut G 1, solder tailpipe 1350466
Threaded tailpipe sets Rp 1

6
2-fold: 1350457
4-fold: 1350467
Press connection set 26 mm x 3 mm

with seal
1-fold: (5) 1511946

press connection, collar nut G 1
Press connection set 32 mm x 3 mm

with seal
1-fold: (5) 1511949

press connection, collar nut G 1
Collar nut G 1
2-fold 1350450
4-fold 1350451
1-fold (20) 1359099
Weldable tailpipe
2-fold 1350594
Solder tailpipe 28 mm
2-fold 1351095
Threaded tailpipe Rp 1
2-fold 1351394
2017 6.67
Stations for heating, cooling, potable water "Regumat" Tailpipe sets DN 32
for dwellings/buildings "Regumat" Tailpipe sets DN 40/50
Packing
unit
"Regumat" Tailpipe sets DN 32 Required for the connection of the "Regumat"

DN 32 to the boiler.
2-fold: collar nut G 2 and solder tailpipe 1350474

2-fold: 1350476
collar nut G 2 and threaded tailpipe
4-fold: 1350477
6
Collar nut G 2
2-fold 1350470
4-fold 1350471
Solder tailpipe 35 mm
2-fold 1351096
Threaded tailpipe Rp 1
2-fold 1351396
Ring gasket
(Set = 10 pieces)
30 x 25 x 2 mm (100) 1359551 For junction G 1.

44.5 x 28 x 2 mm (100) 1359552 For junction G 1.
27 x 38 x 2 mm 1359553 for junction G 1
Set = 4 pieces
56 x 36 x 2.5 (10) 1359554 For junction G 2.
Coupling
2 x G 2 collar nut 1352088* For connection to a "Regumat" DN 32.
"Regumat" Tailpipe sets DN 40/50
Fitting 2-fold For heating circuit connections with female

system Viega Sanpress thread Rp 2.
SC-Contur, bronze, silicone-free seal
54 mm x R 2 1350480
"Cofit PD" Press fitting

2-fold, made of brass resistant to dezincification,
stainless steel casing, for "Copipe HS" composition pipe
63 x 6.0 mm x R 2 1350481
Fitting
R 2 male x G 2 collar nut 1352089* For connection to a "Regumat" DN 40/50.

for dwellings/buildings Thermal insulation
Thermal insulation

Grundfos ALPHA 2.
for "Regumat-180" DN 25 1355091
for "Regumat-180" DN 32 1355092
for "Regumat-180" DN 25 1356090
with pump ball valve, Grundfos
pump ALPHA 2.1 25-60
for "Regumat-180" DN 25 1356091
with pump ball valve,
Wilo pump Stratos ECO 25/1-5
for "Regumat-180" DN 25 1356092
6
without pump ball valve,
Grundfos pump ALPHA 2.1 25-60
for "Regumat-180" DN 25 1356093
without pump ball valve,
Wilo pump Stratos ECO 25/1-5
for "Regumat-180" DN 25 1356097

for "Regumat-180" DN 25 1356098
2017 6.69
Regtronic RH Extension
Outdoor sensor Regtronic EM
S-Bus
Heat demand
6
Pump Temperature sensor Temperature sensor
heating supply supply
circuit 1 Pump heating Pump heating Pump heating
circuit 2 circuit 3 circuit 4
Mixing valve heating circuit OPENED Mixing valve heating circuit OPENED
Mixing valve heatingcircuit CLOSED Mixing valve heating circuit CLOSED
Boiler
Extension
Example: Weather guided control of 2 variable and 2 constant

temperature circuits with heat demand (e.g. via a conventional
boiler, solid fuel or heat pump) consisting of the heating circuit
controller Regtronic RH with outdoor sensor and the extension
module Regtronic EM.
Oventrop products:
1 Regtronic RH Heating circuit controller with outdoor sensor
2 Regtronic EM Extension module
3 Distributor for Regumat
4 Regumat S
5 Regumat M3
6 Optiex Ball valve
7 MSM-Block Boiler safety device
8 Expa-Con Valve with lead sealable cap
6.70 2017
Stations for heating, cooling, potable water "Regtronic EH" Heating circuit controller
for dwellings/buildings "Regtronic RH" Heating circuit controller
"Regtronic EH" Heating circuit controller Weather guided control of the flow temperature
of the heating system by activating a heat
with 1 outdoor sensor and 3 additional sensors (NTC 5000) generator and/or a mixing valve.
Further information and ErP data:
230 V 1152092
Spare sensor 1159091 Temperature sensor NTC 5000 for connection

to the heating circuit controller "Regtronic EH".
"Regtronic RH" Heating circuit controller Weather guided control of the flow temperature 6
of the heating system via the demand of a heat
with 1 outdoor sensor 1152093 generator and/or a mixing valve (e. g.
and 3 additional sensors (PT 1000) "Regumat M3" or "Regufloor HW" with three-
way mixing valve). Controller for wall mounting
with 1 outdoor sensor, 1152090 with data bus (S-bus).
2 additional sensors (PT 1000) Basic functions: 1 variable and 1 constant
and remote control including room temperature sensor (PT 1000) temperature heating circuit with heat demand.
Extendable by "Regtronic EM". The status can
be viewed via a full graphic display.
ErP classication heating circuit controllers Regtronic RH and Regtronic EH Interfaces: S-bus, SD-card slot for data
Boiler control recording
Required
Item no. Controller
accessories
modulating
On/Off
ErP % Class Inputs: 8 sensor inputs (PT 1000, KTY, switch
(0-10 V) or remote control), 2 inputs for electronic
1152092 Regtronic EH X 1.5 III volume flow sensor / pressure sensor and
Adapter cable irradiation sensor.
1152086 Outputs: 4 solid-state relays (speed controlled),
1152093 Regtronic RH X 1.5 III 1 standard relay (volt free), 2 PWM outputs for
Regtronic RH the speed controlled activation of high-
Adapter cable
1152090 incl. remote control with X 4.0 VI efficiency pumps. Both PWM outputs can be
1152086
room temperature sensor switched to 0-10 V.
Regtronic RH
1152090 incl. remote control with X 3.5 VII For the connection of high-performance
2 x room
Regtronic RH temperature
room temperature sensor Adapter cable
1152086
Adapter cable Adapter cable for signal transmission, for

instance from the heating circuit controller
PWM-/ 0-10 V 1152086 "Regtronic RH" to a modulating heat generator
with 0-10 V interface.
Accessory required for ErP classification II, VI
and VIII.
1357020/27/29 and 1357220/27/29
Outside temperature sensor 1152099 Temperature sensor PT 1000 for connection to

the heating circuit controller "Regtronic RH".

for dwellings/buildings "Regtronic EM" Extension module
"Regtronic SV" Sensor distributor The sensor distributor "Regtronic SV"

distributes the signal of one PT 1000 outside
for the distribution of one PT 1000 1152088 temperature sensor to 6 outputs.
temperature sensor to up to 6 "Regtronic" This allows the transmission of the signal of
controllers one sensor to up to 6 controllers (e.g. heating
circuit controller "Regtronic RH").
Outdoor temperature sensor
Regtronic SV Sensor Regtronic RH Regtronic SV Sensor Regtronic RH

distribution box distribution box
6
Example: Distribution of one temperature sensor (outside
temperature sensor) to 5 respectively 6 heating circuit
controllers "Regtronic RH".
controller "Regtronic RH" Thus, further variable or constant temperature
heating circuits can be activated. Up to five
extension modules can be connected to the
heating circuit controller "Regtronic RH".
included.
6.72 2017
Packing
unit
Accessories
Room thermostat - surface mounting The surface- or flush-mounted model of the

electric thermostat is used for individual
230 V (25) 1152051 room temperature control in combination with
24 V (25) 1152052 the electrothermal actuators (two point)
"Aktor T 2P".
Heating: Use electrothermal actuators (two 6
point) "closed with current off". As for item no.
230 V (25) 1152055 1152051/52/55/71/72, temperature may be set
with concealed temperature setting back by use of an external time switch (item
no. 1152551/52 for 230 V, item no. 1152554
for 24 V).
Cooling: Use electrothermal actuators (two
point) "open with current off".
limiting elements.
The isolator terminals of the room thermostat
can be connected to the sensor entry of the
The heating circuit controller can for instance
activate a 230 V actuator or can switch to
reduced heating operation.

Room controller with operating mode switch,

Room controller with 1152087 remote control and room temperature sensor
operating mode switch, remote control PT 1000 for the connection to the heating
and room temperature sensor PT 1000 circuit controller "Regtronic RH" for a
comfortable setting of the operating mode and
heating curve of the controller from the living
area.
Operating mode switch:
Setting of the operating modes "Automatic",
"Night setback", "Summer" and "Off".
Remote control:
An increase of the heating curve provokes an
increase of the flow temperature and vice
versa. Furthermore, the remote control features
the functions "Heating circuit off" and "Party
position".
2017 6.73
Stations for heating, cooling, potable water High-efficiency pumps 130 mm
for dwellings/buildings High-efficieny pumps 180 mm
Article length Article-No. Hint
"Sensor LW TH" For electronic registration of the riser

Temperature sensor PT 1000 temperatures.
Storage cylinder 1369093 Continuous temperature range: up to 105 C

L = 300 cm
Collector 1369094 Continuous temperature range: up to 180 C
L = 200 cm.
Continuous operating temperature range:

Temperature sensor attached to the pipe 1369095 up to 180 C
Sensor element PT 1000, L = 150 mm
with fixing clamp 25 - 40
6 and heat conducting paste
High-efficiency pump 130 mm with connection thread G 1

DN 20
Grundfos ALPHA 2.1 15-60 130 1357161*

DN 25
Wilo-Yonos PARA RS 25/6-RKA 130 1357153

Wilo-Yonos PARA RS 25/6-RKC 130 1357154
Grundfos ALPHA 2.1 25-60 130 1357157
High-efficiency pumps 180 mm with connection thread G 1 For replacement purposes or for upgrading the
DN 25 "Regumat 180" stations without pump, for
open vented systems.
Grundfos ALPHA 2.1 25-60 180 1358155
Grundfos ALPHA 2.1 25-60N 180 1357159 with stainless steel body
Wilo-Stratos PICO 25/1-6 180 1358157
Wilo-Stratos PICO 25/1-6 RG 180 1357160 with bronze body

DN 32
Grundfos ALPHA 2.1 32-60 180 1358161

Wilo-Stratos ECO 30/1-5 180 1358162
Wilo-Yonos PARA RS 30/6-RKC 180 1358164
KSB Calio 30-120 180 1358165 For subsequent installation into the
"Regumat S/M3-180" DN 32 with
pump ball valve.
Other circulation pumps on request.
Power cord Small model for "Regumat 180"

for high-efficiency pumps DN 25 without pump ball valve.
with right angle plug Cable 2 m long.
for Grundfos ALPHA 1358150

for Wilo-Stratos PICO 1358170*
for Wilo-Yonos PARA 1358171*

(> 1A).

for dwellings/buildings 6.h "Regudis W" Dwelling stations
Page

Content
"Regudis W-HTU" Dwelling stations, depth 150 - 175 mm 6.79
"Regudis W-HTU Basic" Dwelling stations, depth 150 - 175 mm 6.82
"Regudis W-HTF" Dwelling stations, depth 110 mm 6.83
Covers and cabinets for dwelling stations "Regudis W" 6.87
"Regudis W-HTE" Dwelling stations - electronic control, 6.93
depth 110 mm
Extension modules for "Regudis W-HTE" 6.93 6
Accessories for "Regudis W-HTE" 6.94
"Regtronic RD-W" System controller 6.95
Accessories for system controller "Regtronic RD-W" 6.95
2017 6.75
Stations for heating, cooling, potable water 6.h "Regudis W" Dwelling stations
Regudis W-HTF
variable temperature
circuit
Regudis W-HTU
Regtronic RD-W
Regumat M3-220
Regusol L-130
Heat
generator
System illustration: Regudis W with conventional heat generator, buffer storage cylinder and solar integration
A control engineered integration of the Regudis W dwelling stations into the heating system can be carried out with
the help of the Regudis system controller Regtronic RD-W.
6.76 2017
for dwellings/buildings General information
Dwelling stations supply heat as well as hot and cold potable water to individual dwellings or commercial units without using auxiliary energy.
The hot water for heating purposes is provided by a central heat supply. The potable water is heated locally via a heat exchanger according to
the continuous ow principle.
1 Plate heat exchanger

2 Proportional ow controller
3 Thermostatic potable water temperature controller with
sensor made of stainless steel, control range 40-70 C
4 Differential pressure regulator
5 Zone valve for heating circuit control
5 6 Deaeration heating circuit
7 Deaeration potable water circuit
8 Spacer for heat meter (110 mm)
9 Spacer for cold water meter (110 mm)
10 Derivative temperature control set
11 Strainer heating water supply
12 Strainer constant temperature heating circuit return
13 Draining valve constant temperature heating circuit 6
11 14 Draining valve variable temperature heating circuit
15 Strainer variable temperature heating circuit return
1 16 Heating circuit ow temperature controller, control range
15 20-50 C
17 Heating circuit pump
18 Actuator for time controlled potable water circulation
19 Potable water circulation pump
20 Flow limiter for the limitation of the maximum potable
water draw off capacity (available as accessory)
Potable water dwelling: Supply:

A B D E I A Potable water hot C Cold water supply
B Potable water cold D Heating water supply
J Circulation return E Heating water return
Heating circuit dwelling

Regudis W-HTF full featured model F Variable temperature heating circuit supply
With variable temperature heating circuit, high temperature circuit, G Variable temperature heating circuit return
circulation pipe and derivative temperature control set H Constant temperature heating circuit return
I Constant temperature heating circuit supply
Models:
The Regudis W product range distinguishes between two standard models
which differ in installation depth and function.
Regudis W-HTU
(W = Living, H = Heating, T =Hot potable water preparation,
U = all connections from below)
Installation depth between 150 mm and 175 mm.
With constant temperature heating circuit.
Ideal for the replacement of existing gas ow heaters during building
refurbishment.
Regudis W-HTF
(W = Living, H = Heating, T = Hot potable water preparation, F = Flat format)
With constant and/or variable temperature heating circuit.
With an installation depth of only 110 mm ideal for installation in lightweight
partitioning walls.
Connection possibility for underoor heating distributors/collectors.
2017 6.77
for dwellings/buildings General information
Technical data: Draw off temperature tdraw off:

Nominalsize: DN20 The draw off temperature is adjustable between 40 C and 70 C
Max.operatingpressure: PN10 andremainsconstantwithintheperformancerange.
Ifthenominaldrawoffcapacityisexceeded,tdrawoffmaydropbelow
Max.operatingtemperature: 90C thesetvalue.
(heatingwatersupply)
Min.coldwaterpressure
withoutowlimiter: 2.0bar2)
withowlimiter: 2.5bar Plate heat exchanger:
Min.differentialpressuresupply: 300mbar1) When choosing the dwelling station, the water quality of the
applicationareamustbeobserved.
(Awateranalysiscanbeobtainedfromthelocalwaterauthority.)
Drawofftemperaturetdrawoff 40-70C AllRegudisdwellingstationsarealsoavailablewithnickelbrazed
Temperaturevariable heatexchangers.Theyareusedinareaswherecopperbrazedheat
temperatureheatingcircuit: 20-50C exchangerscannotbeused,forinstance,inmixedinstallationsor
Min.owtemperature: tdrawoff +15K areaswithaggressivewater.
Possibleapplicationofcopperbrazedplateheatexchangershasto
6 Nominal draw off capacity: bechecked.
The use of different plate heating exchangers allows for the Forfurtherinformationvisitwww.oventrop.de/potable_water.
adaptationoftheperformancerangetotheindividualrequirements.
Thedouble-walledheatexchangerwithleakagepathsoffersadditional
Performance range 1: Nominal draw off capacity 12 l/min. protectionofpotablewater.
Performance range 2: Nominal draw off capacity 15 l/min.
Performance range 3: Nominal draw off capacity 17 l/min.
Thenominaldrawoffcapacitydependsontheselectedperformance Heat meters:

rangeandtheowtemperatureoftheheatingwater.Theindicated Whenusingaheatmeter,itisrecommendedtoonlyuseheatmeters
performancerange(nominaldrawoffcapacity12/15/17l/min.)is withquicksamplingrateatonesecondintervalsandwithintegrated
relatedtoaheatingwaterowtemperaturelying15Kabovetheset returnsensorinthebody.
drawofftemperature(temperaturedifferenceof15K).Flowlimiters
forthelimitationofthepotablewaterdrawoffcapacityareavailable According to the German Energy Saving Directive (EnEV),
asaccessory. Regudisdwellingstationscanbeequatedwithacentralhotwater
If the temperature difference exceeds 15 K, the effective draw off preparation with potable water circulation. For further information
capacityincreases.2) visitwww.oventrop.de.
Furtherinformationonrequest.
ForfurtherinformationseeTechnicalinformation.
1) 150 mbar for dwelling stations without integrated differential
pressureregulator.
2) Since 01.03.2016, the Oventrop dwelling stations (except for
RegudisW-TU)arenolongersuppliedwithowlimitersforthe
limitationofthemaximumpotablewaterdrawoffcapacity.
6.78 2017
for dwellings/buildings "Regudis W-HTU" Dwelling stations, depth 150 - 175 mm
Nominal draw off

capacity [l/min]
"Regudis W-HTU" Dwelling stations, depth 150 - 175 mm Dwelling stations "Regudis W-HTU" with
consisting of: constant temperature heating circuit.
- Plate heat exchanger Example of a complete station consisting of:

- Proportional flow controller
- Thermostatic temperature controller 1) 1341032 "Regudis W-HTU"
- Strainer 2) 1341080 Ball valve connector block
- Spacer for heat meter 3) 1341191 Derivative temperature control set
- Spacer for cold water meter 4) 1341070 Flush-mounted cabinet- slim model
- Zone valve for heating circuit control
- Differential pressure regulator
- Deaeration
- Draining facility
1
6
Heat exchanger copper brazed
Performance range 1 12 l/min 1341030

Performance range 3 17 l/min 1341032 3
Heat exchanger nickel brazed

Performance range 2 15 l/min 1341051 2
Dimensions (W x H x D): 476 mm x 630 mm x 150 mm

4
Possible application of copper brazed plate

heat exchangers has to be checked. For further
information visit www.oventrop.com/to/
trinkwasseranforderung.

2017 6.79
for dwellings/buildings Further models
Nominal draw off

capacity [l/min]
Further models Possible application of copper brazed plate

"Regudis W-HTU" information visit www.oventrop.com/to/
without cold water outlet dwelling trinkwasseranforderung.
and without spacer for cold water meter
Heat exchanger 15 l/min 1341231 Dimensions (W x H x D):

copper brazed 476 mm x 630 mm x 150 mm
Heat exchanger 15 l/min 1341251*
nickel brazed
Model with double-walled heat exchanger with

6 Heat exchanger 8 l/min 1341220 leakage paths for the additional protection of
double-walled potable water.
copper brazed Dimensions (W x H x D):
476 mm x 630 mm x 175 mm
"Regudis W-HTO"
Supply connections from the top,
strainer in the potable water inlet,
without cold water outlet dwelling,
without spacer for cold water meter,
6 ball valves included
Heat exchanger, 15 l/min 1341274

copper brazed
Heat exchanger 15 l/min 1341271 Dimensions (W x H x D):
nickel brazed 476 mm x 630 mm x 150 mm
"Regudis W-TU" for hot potable water preparation

without heating circuit,
without cold water outlet dwelling,
without spacer for cold water meter,
without spacer for heat meter,
derivative temperature control set pre-assembled,
4 ball valves included
Heat exchanger 17 l/min 1341262

Heat exchanger 17 l/min 1341252 476 mm x 630 mm x 150 mm
nickel brazed
"Regudis W-TU" for hot potable water preparation

without heating circuit,
derivative temperature control set pre-assembled Dimensions (W x H x D):
476 mm x 630 mm x 150 mm
copper brazed
nickel brazed

for dwellings/buildings Further models
Nominal draw off

capacity [l/min]
"Regudis W-HTU Duo" with heating circuit separation system The "Regudis W-HTU Duo" dwelling station
consisting of: features two plate heat exchangers.
-2 plate heat exchangers The additional heat exchanger on the heating

-Proportional flow controller side allows the separation of the supply system
-Thermostatic temperature controller (primary circuit) and the heating circuit of the
-Strainer dwelling (secondary circuit).
-Spacer for heat meter
-Spacer for cold water meter Heating circuit temperature control range:
-Zone valve for heating circuit control 40 C up to 70 C
-Differential pressure regulator
-Wilo pump Yonos PARA RS 15/1-6 RKA Mae (W x H x D):
-Diaphragm expansion tank 3 l 630 mm x 630 mm x 150 mm
-Safety valve 3 bar
-Pressure gauge
-Deaeration
6
-Draining facility

copper brazed
"Regudis W-HTO Duo" with heating circuit separation system Dimensions (W x H x D):
Potable water connections and 630 mm x 630 mm x 165 mm
supply connections from the top,
without cold water outlet dwelling, Possible application of copper brazed plate
without spacer for cold water meter, heat exchangers has to be checked. For further
derivative temperature control set cannot be integrated information visit www.oventrop.com/to/

copper brazed
2017 6.81
Stations for heating, cooling, potable water "Regudis W-HTU Basic" Dwelling stations, depth 150 - 175
for dwellings/buildings mm
Nominal draw off

capacity [l/min]
"Regudis W-HTU Basic" Dwelling stations, depth 150 - 175 mm Contrary to the standard model, the "Regudis
without differential pressure regulator, W-HTU Basic" is supplied without integrated
without cold water outlet dwelling and differential pressure regulator and without cold
without spacer for cold water meter water outlet.
The demands on comfort and energy efficiency
Heat exchanger of the hot potable water preparation are still
copper brazed fulfilled by the combination consisting of
proportional flow controller and temperature
Performance range 1 12 l/min 1340930 controller.
Performance range 3 17 l/min 1340932 Hydronic balancing of up to 5 dwelling stations
connected to one riser can be carried out with
the help of a differential pressure regulator
Heat exchanger nickel brazed "Hycocon DTZ" installed in the riser.
6 Performance range 1 12 l/min 1340950 Dimensions (W x H x D):
Performance range 2 15 l/min 1340951 476 mm x 630 mm x 150 mm
The model with double-walled heat exchanger
Heat exchanger 8 l/min 1340920 with leakage paths offers additional protection
double-walled of potable water.
476 mm x 630 mm x 175 mm

6.82 2017
for dwellings/buildings "Regudis W-HTF" Dwelling stations, depth 110 mm
Nominal draw off

capacity [l/min]
"Regudis W-HTF" Dwelling stations, depth 110 mm Dwelling station "Regudis W-HTF" with variable
consisting of: temperature heating circuit for flow
-Plate heat exchanger temperature control when using an underfloor
-Proportional flow controller heating.
-Thermostatic temperature controller Flow temperature setting: 20 C up to 50 C
-Strainer
-Stainless steel spacer for heat meter Example of a complete station consisting of:
-Stainless steel spacer for cold water meter 1) 1341140 "Regudis W-HTF"
-Zone valve for heating circuit control 2) 1341180 Ball valve connector block
-Differential pressure regulator 3) 1341191 Derivative temperature control set
-Deaeration 4) 1341175 Cabinet - long model
-Draining facility 5) 1405358 "Multidis SF" 8-fold stainless steel
alternatively with variable temperature heating circuit (fixed value distributor/collector
control via heating circuit pump) or constant temperature heating 6) 1341187 Connection set for stainless steel
circuit. distributor/collector
6
Dimensions: 565 x 655 mm constant temperature heating circuit 4
Dimensions: 630 x 655 mm variable temperature heating circuit
"Regudis W-HTF"
with variable temperature heating circuit,
fixed value control, 1
Wilo pump Yonos PARA RS 15/1-6 RKA
3

Heat exchanger nickel brazed 2

6
"Regudis W-HTF"
with constant temperature heating circuit
5

Components for underfloor heating control:
product range 2
All stations are available with copper or nickel

brazed heat exchanger.
Further models on request.
Performance range 2 15 l/min 1341151 Possible application of copper brazed plate
Performance range 3 17 l/min 1341152 heat exchangers has to be checked. For further

2017 6.83
for dwellings/buildings "Regudis W-HTF" Dwelling stations, depth 110 mm
Nominal draw off

capacity [l/min]
"Regudis W-HTF" As "Regudis W-HTF" with variable temperature

with variable temperature heating circuit and heating circuit, but with additional outlet for a
high temperature circuit, radiator circuit.
Wilo pump Yonos PARA RS 15/1-6 RKA

6 Performance range 1 12 l/min

Performance range 2 15 l/min
1341360
1341361
"Regudis W-HTF" As "Regudis W-HTF" with constant

with constant temperature heating circuit and circulation pipe, temperature heating circuit, but with
Potable water circulation pump: Wilo Star Z Nova C additional time controlled potable
water circulation pump.
Performance range 3 17 l/min 1341642*

with variable temperature heating circuit and circulation pipe, heating circuit, but with additional time
Wilo pump Yonos PARA RS 15/1-6 RKA controlled potable water circulation pipe.
Potable water circulation pump: Wilo Star Z Nova C

with variable temperature heating circuit, high temperature circuit heating circuit, but with additional outlet for a
and circulation pipe, radiator circuit and time controlled potable
Wilo pump Yonos PARA RS 15/1-6 RKA water circulation pipe.
Potable water circulation pump: Wilo Star Z Nova C
Heat exchanger copper brazed heat exchangers has to be checked. For further
Performance range 3 17 l/min 1341542 trinkwasseranforderung.

Nominal draw off

capacity [l/min]
"Regudis W-HTF" - GSWB Possible application of copper brazed heat

Similar to "Regudis W-HTF" with constant temperature exchangers has to be checked. For further
heating circuit, item no. 1341131, information visit www.oventrop.com/to/
but additionally with spacer for cold and hot water meter, trinkwasseranforderung
no potable water priority function,
derivative temperature control set pre-assembled, Dimensions (W x H x D)
return temperature imiter in the heating circuit 565 mm x 655 mm x 110 mm

copper brazed
Accessories for"Regudis W-HTF" - GSWB
6
Surface-mounted cover with door 1341195 Dimensions (W x H x D):
steel, galvanised, white powder coated 590 mm x 830 mm x 120 mm
Frame closed on all sides,

flush-mounted model.
Dimensions (W x H X D):
Refurbishment frame 1341196 590 mm x 830 mm x 60 mm
Ball valve connector block 1341182 7 angle pattern ball valves mounted onto a
bracket for the isolation of all connections of
the "Regudis W" station, corrugated pipe for a
flexible device connection included.
Connection to the pipework:
G female thread
2017 6.85
"Regudis W-HTU" Ball valve connector blocks For the isolation of all connections of the
"Regudis" stations.
Connection to the pipework:
G female thread
Ball valve connector block 1341080 7 ball valves mounted onto a bracket
Ball valve connector block 1341084 6 ball valves mounted onto a bracket
without cold water outlet dwelling
5 ball valves mounted onto a bracket

Ball vave connector block 1341083
without heating circuit connection
dwelling
6
Ball valve connector block consisting of ball
Ball valve connector block 1341082 valves and "Flypass" connection fitting. 5 ball
with flushing function of the supply pipe valves and "Flypass" connection fitting
mounted onto a bracket for the isolation of all
connections of the "Regudis W" station. The
Oventrop "Flypass" connection fitting is used
for the isolation and flushing of the flow and
return pipework serving the "Regudis" station.
The connection fitting can be converted to
bypass operation.
Connection to the pipework: G female thread
"Regudis W-HTF" Ball valve connector blocks
7 ball valves mounted onto a bracket for

Ball valve connector block 1341180 isolation of all connections of the
"Regudis W" station.
Ball valve connector block consisting of ball

Ball valve connector block 1341185 valves and "Flypass" connection fitting. 5 ball
with flushing function of the supply pipe valves and "Flypass" connection fitting
mounted onto a bracket for the isolation of all
connections of the "Regudis W-HTF" station.
The Oventrop "Flypass" connection fitting is
used for the isolation and flushing of the
flow and return pipework serving the
"Regudis" station. The connection fitting
can be converted tobypass operation.
Ball valve connection set 1341183 2 ball valves mounted onto a bracket for the
high temperature connection isolation of the high temperature connection of
the "Regudis W-HTF" station.
Ball valve connection set 1341184 1 ball valve mounted onto a bracket for the
circulation pipe isolation of the circulation pipe of the "Regudis
W-HTF" station.
Replacement ball valve For "Regudis W-HTU" and "Regudis W-HTF"

ball valve connector blocks.
Ball valve for the supply pipe: red handle 1341980 G male thread x G female thread
Ball valve for the return pipe: blue handle 1341981
6.86 2017
for dwellings/buildings Covers and cabinets for dwelling stations "Regudis W"
Covers and cabinets for dwelling stations
Covers Cabinets
Flush mounting Surface mounting
Catalogue Regubox
Item no. 1341095 1341097 1341195 1341197 1341295 1341296 1341070 1341170 1341175 1341177 1341071 1341198 1341072 1341074
1341098
page
1 1340920 6.82 x
2 1340930/31/32 6.82 x x x x x x x
3 1340950/51/52 6.82 x x x x x x x
4 1341030/31/32 6.79 x x x x x x x
5 1341050/51/52 6.79 x x x x x x x
6 1341121 6.85 x x x x x
6
7 1341130/31/32 6.83 x x x x x x x
8 1341140/41/42 6.83 x x x x x x
9 1341150/51/52 6.83 x x x x x x x
10 1341160/61/62 6.83 x x x x x x
11 1341220 6.80 x x
12 1341231 6.80 x x x x x x x
13 1341252 6.80 x x x x x x x
14 1341257 6.80 x x x x x x x
15 1341262 6.80 x x x x x x x
16 1341271 6.80 x
17 1341274 6.80 x
18 1341332 6.81 x x x x
19 1341340/41/42 6.84 x x x x x x
20 1341360/61/62 6.84 x x x x x x
21 1341372 6.81 x x
22 1341442/62 6.84 x x x x
23 1341542/62 6.84 x x x x
24 1341642/62 6.84 x x x x
2017 6.87
Packing
unit
Surface-mounted covers
steel, galvanised 1341095 Dimensions (W x H x D):

white lacquered 496 mm x 800 mm x 160 mm
stainless steel 1341097 Dimensions (W x H x D):

with "anti-fingerprint" coating 496 mm x 800 mm x 160 mm
steel, galvanised, white powder coated, 1341296 Dimensions (W x H x D):

for "Regudis W-HTU" 496 mm x 800 mm x 185 mm
with double-walled heat exchanger
Long model 1341295 Dimensions (W x H x D):

6 steel, galvanised, white powder coated,
pipe cutouts at the top and bottom
496 mm x 1100 mm x 160 mm
Surface-mounted cover with door 1341195 Dimensions (W x H x D):

steel, galvanised, white powder coated 590 mm x 830 mm x 120 mm
Frame closed on all sides,

flush-mounted model.
steel, galvanised, white powder coated 1341197 Dimensions (W x H x D):

645 mm x 800 mm x 120 mm
Cabinets - flush mounting

Body steel, galvanised
door, frame and plinth white powder coated,
removable plinth
Slim model, 1341070 Dimensions (W x H x D):

adjustable height and depth 560 mm x 870-1075 mm x 150-215 mm
Wide model, (10) 1341170 Dimensions (W x H x D):

adjustable height and depth 700 mm x 985-1105 mm x 115-180 mm
Long model Suitable stainless steel distributors/collectors

for direct installation of dwelling stations "Multidis SF": page 2.58
and stainless steel distributors/collectors
"Multidis SF"
for stainless steel distributors/collectors 1341175 Dimensions (W x H x D):

for up to 10 circuits 700 mm x 1440-1565 mm x 115-180 mm
for stainless steel distributors/collectors 1341177* Dimensions (W x H x D):
for up to 12 circuits 880 mm x 1440-1565 mm x 115-180 mm

Cabinets - surface mounting

Body steel, galvanised
door, frame and plinth white powder coated,
removable plinth
Standard model 1341071 Dimensions (W x H x D):

700 mm x 980 - 1105 mm x 160 mm
Long model 1341198 Dimensions (W x H x D):

for direct installation of dwelling stations 700 mm x 1440 - 1565 mm x 160 mm 6
and stainless steel distributors/collectors "Multidis SF"
Suitable stainless steel distributors/collectors
"Multidis SF" (up to 10 circuits): page 2.58
Model for wall attachment, 1341072 Dimensions (W x H x D):

pipe cutouts at the top and bottom 750 mm x 1000 mm x 175 mm
Long model 1341074* Dimensions (W x H x D):

pipe cutouts at the top and bottom 750 mm x 1523-1648 mm x 175 mm
Suitable stainless steel distributors/collectors

"Multidis SF" (up to 12 circuits): page 2.58
"Regubox" Exclusive cabinet Dimensions (W x H x D):

630 mm x 900 mm x 170 mm
with white, frameless, opaque and lockable glass door The mounting set for installation during
construction for floor-standing installation (item
Frame surface made of brushed stainless steel, no. 1341099) or wall attachment (item no.
without rear wall 1341199) is to be ordered separately.
Surface-mounted model 1341098 Awards:

for dwelling stations "Regudis W-HTU" and ISH Frankfurt 2015
"Regudis W-HTF" with constant temperature
heating circuit and for stainless steel distributors/ ICONIC AWARDS 2015
collectors "Multidis SF" with a maximum of
6 heating circuit connections (angle pattern GERMAN DESIGN AWARD
connection set, item no. 1404780, taken into SPECIAL 2016
account)
iF Design Award 2016
Mounting set for installation during construction for "Regubox"

Floor-standing installation, 1341099 Only for "Regubox", item no. 1341098.

adjustable height
Wall attachment 1341199 With screen for covering the lower connection
channel of the "Regubox" in case of wall
attachment.

Packing
unit
"Regudis W-HTU" Heat exchangers Heat exchanger for "Regudis W-HTU" dwelling
stations.
Heat exchanger copper brazed Connections: G , flat sealing
Performance range 1 12 l/min - 24 plates 1341280 Possible application of copper brazed plate
Performance range 2 15 l/min - 30 plates 1341281 heat exchangers has to be checked. For further
Performance range 3 17 l/min - 30 plates 1341282 information visit www.oventrop.com/to/
6 Heat exchanger nickel brazed
Performance range 1 12 l/min - 24 plates 1341290

"Regudis W-HTF" Heat exchangers Heat exchanger for "Regudis W-HTF" dwelling
stations.
Heat exchanger copper brazed Connections: G , flat sealing
Performance range 3 17 l/min - 30 plates 1341282 Possible application of copper brazed plate
Performance range 1 12 l/min - 16 plates 1341283 heat exchangers has to be checked. For further
Performance range 2 15 l/min - 20 plates 1341284 information www.oventrop.com/to/

Plugs for temperature sensor
G M x M 12 x 1.5 M, 6.2 (25) 1349053
G M x M 10 x 1.0 F 5.6 (25) 1349051 For temperature sensor with connection thread
M 10 x 1.
G M x M 10 x 1.0 F, 5.6 (25) 1349054 For temperature sensor with connection thread
M 10 x 1.0 in dwelling stations with high
temperature circuit.
Derivative temperature control set For maintaining the flow temperature in the
for stations with mounted brass distributor/collector "Regudis W" station to guarantee a quick
supply of hot potable water outside the heating
ready for installation for 1341088* period.
"Regudis W-HTU/TU"
ready for installation for "Regudis W-HT" 1341089*
ready for installation for 1341188*
"Regudis W-HTF"
for universal application, 1341191
not pre-assembled
Stainless steel spacer 1349052 For replacement of the plastic spacers for
G x 110 mm cold water and heat meters.

Packing
unit
Draining set (10) 1341094 For a simple draining of the heating circuit
when installing a heat meter.
Flow controller 1343050 Spare part for "Regudis W" dwelling stations
except for GSWB model, "Regudis W-TU" and
"Regudis" with circulation pipe manufactured
up to 2016.
Flow limiter For the limitation of the maximum potable

water draw off capacity.
Draw off capacity limitation (25) 1349980 Since 01.03.2016, flow limiters for the limitation
12 l/min of the maximum potable water draw off
Draw off capacity limitation (25) 1349981 capacity are no longer mounted at works. 6
15 l/min
Draw off capacity limitation (25) 1349982
17 l/min
Circulation pump 130 mm As replacement for the dwelling stations

connection thread G 1 "Regudis W-HTF" with variable temperature
heating circuit.
Wilo-Yonos PARA RS 15/6 RK 1349097*
Flushing and bridging fitting 1341189* For flushing of the heating system.
Filter insert 1349098

Set = 2 pieces
Draining valve 1349099
Connection set for stainless steel 1341187 For the connection of the "Regudis W-HTF"
distributor/collector "Multidis SF" dwelling station to the "Multidis SF"
stainless steel distributor/collector.
T-piece 1685121* 2 T-pieces allow for the connection of two

stainless steel distributors/collectors to one
connection set.
Temperature sensor
with spiral sensor made of stainless steel 1343092
Return temperature limiter set 1341091 For temperature limitation of the heating return
heating circuit temperature (control range 0 - 40 C).
Only suitable for "Regudis W-HTU" and
"Regudis W-HT".

Packing
unit
Conversion set second cold water meter 1341093 For subsequent installation of a cold water
meter to the dwelling.
For stations with cold water outlet. Only
suitable for "Regudis W-HTU",
"Regudis W-HTU Duo" and "Regudis W-TU".
Earth clip (50) 1341092 For equipotential bonding of the dwelling

station.
6 Connection set for "Regudis W" 1341081 Set consisting of 7 corrugated hoses which
with flexible corrugated hoses may be cut to required length for a flexible
connection.
6.92 2017
"Regudis W-HTE" Dwelling stations - electronic control,
Stations for heating, cooling, potable water depth 110 mm
for dwellings/buildings Extension modules for "Regudis W-HTE"
Nominal draw off

capacity [l/min]
"Regudis W-HTE" Dwelling stations - electronic control, Heat transmission station with electronic
depth 110 mm control for the supply of hot and cold potable
consisting of: water as well as heating water to a dwelling.
-Plate heat exchanger
-Control valve with integrated differential pressure and flow control The performance ranges for the draw off
-Actuator with integrated potable water temperature control volume flow are reached at a heating water
-Flow and temperature sensors flow temperature set 5 K above the draw off
-Strainer temperature.
-Spacer for heat meter
-Spacer for cold water meter The modular construction of the "Regtronic
-Connection facility for return temperature sensor of the heat meter W-HTE" station allows upgrading the functional
(M 10 x 1) range with the help of the below extension
-Dearation/draining facility modules.
Heat exchanger copper brazed Technical data:

Nominal size: DN 20
6
Performance range 1 12 l/min 1344030* Pressure rating: PN 16
Performance range 2 18 l/min 1344031* Max. operating temperature: 90 C
Performance range 3 25 l/min 1344032* Draw off temperature: 40 C - 70 C
Heat exchanger completely made of stainless steel
9
8
2
1
Extension modules for "Regudis W-HTE"
Flow temperature control module for surface heating systems 3

4
For the extension of the "Regudis W-HTE" station by a thermostatic
flow temperature control for surface heating circuits.
Flow temperature control range: 20 C - 50 C 5 6
consisting of:
-High-efficiency pump Wilo-Yonos PARA RS 15/1-6 RKA 7
-Thermostatic temperature controller with contact sensor
-Connection set for stainless steel distributor/collector "Multidis SF"
1344550*
Potable water circulation module

1) "Regudis W-HTE" Dwelling station
2) Potable water circulation module
For the extension of the "Regudis W-HTE" station by a time controlled
3) Derivative temperature control set
potable water circulation function.
4) Ball valve connector block
5) Flow temperature control module
consisting of:
6) "Multidis SF" Stainless steel
-High-efficiency pump Wilo Star Z Nova
distributor/collector
-Timer
7) Actuator surface heating
-Pipe connection set
8) Actuator zone valve
9) Connecting block for room thermostats
1344555*
and actuators

for dwellings/buildings Accessories for "Regudis W-HTE"
Accessories for "Regudis W-HTE"
Derivative temperature control set For maintaining the flow temperature

to guarantee a quick supply of hot potable
1344490* water outside the heating period.
Ball valve connector blocks

for the isolation of all connections of the "Regudis W-HTE" station
7 ball valves mounted onto a bracket 1344480*
6 with flushing function of the supply pipe 1344485*

5 ball valves and "Flypass" connection
fitting mounted onto a bracket

for dwellings/buildings Accessories for system controller "Regtronic RD-W"
"Regtronic RD-W" System controller For the control engineered integration of the
dwelling stations "Regudis W" into the heat
1342093 supply.
The controller offers the following control
options:
-Buffer storage cylinder loading
-Flow temperature control with heat
demand recognition
-Differential pressure control of the heating
circuit pump with heat demand recognition
Furthermore, the flow and buffer storage
cylinder temperatures as well as the differential
pressure can be set back according to
adjustable timed progammes, for instance
overnight.
6
b a
f
e
d
c
System illustration Regtronic RD-W
a Regtronic RD-W System controller

b Outdoor sensor
c Heat generator
d Buffer storage cylinder
e Flow and return temperature sensor
f Differential pressure sensor
g Pump (speed controlled via 0-10 V interface)
Accessories for system controller "Regtronic RD-W"
Sensor connection set "Regumat" For the connection of differential pressure

for system controller "Regtronic RD-W" and temperature sensors to the pipework.
consisting of: 1357291*

2 x Adapter G 2 male x G 2 male
1 x Differential pressure sensor
2 x Temperature sensor PT 1000
Sensor connection set "Regumat" As item no. 1357291, but without differential
for system controller "Regtronic RD-W" pressure sensor.
consisting of: 1357292*

2 x Adapter G 2 male x G 2 male
2 x Temperature sensor PT 1000
Fitting
R 2 male x G 2 collar nut 1352089* For connection to a "Regumat" DN 40/50.
Coupling
2 x G 2 collar nut 1352088* For connection to a "Regumat" DN 32.

Electronic control components for the
constant temperature heating circuit
Stations for heating, cooling, potable water Electronic control components for the
for dwellings/buildings variable temperature heating circuit
Packing
unit

constant temperature heating circuit
programme.
230 V (40) 1152561 In combination with a two point actuator, e.g.
item no. 1012415, the room thermostat can be
used for the timed control of the constant
temperature heating circuit of the dwelling of
a "Regudis" station.

variable temperature heating circuit
6
"Sensor LW TH" Electric sensor attached
to the pipe with concealed temperature setting
Control range 20-90 C 1143000 For max. limitation of the flow temperature
of surface heating systems.
"Regtronic EH" Heating circuit controller In combination with a three point actuator, the
heating circuit controllers allow for weather
with 1 outdoor sensor and 3 additional sensors (NTC 5000) guided control of the variable temperature
heating circuit of the dwelling of the "Regudis"
230 V 1152092 dwelling stations.
"Regtronic RH" Heating circuit controller
with 1 outdoor sensor 1152093

and 3 additional sensors (PT 1000)
In combination with a heating circuit controller,

"Aktor M" Electromotive actuators the actuators allow for weather guided control
connection thread M 30 x 1.5 of the variable temperature heating circuit of
with manual setting, adjustable mode of operation the dwelling of the "Regudis" dwelling stations.
"ST L", 24 V, modulating proportional 1012705

actuator, 0-10 V,
recognition of neutral point,
multiple characteristic lines adjustable
"3P L", 24 V, three point actuator, 1012708


without anti-blocking function,
mode of operation not adjustable


Packing
unit
For the connection of up to 10 room

Connecting block (10 control zones) thermostats and actuators for individual room
for room thermostats and actuators temperature control.
For the additional control of the pump for the
230 V, heating/cooling, (25) 1400981 variable temperature heating circuit inside the
pump control dwelling station.
Room thermostat-clock - surface mounting (heating) The room thermostat allows setback operation.
The setback periods can be passed onto the
with daily setting room thermostat 1152051 via the connecting
block 1400981.
230 V (78) 1152551
with weekly setting 6

230 V (78) 1152552
Room thermostat - surface mounting (heating)
230 V (25) 1152051
For individual room temperature control in

"Aktor T 2P" Electrothermal actuators (two point) combination with the connecting block, item
connection thread M 30 x 1.5 no. 1400981.
For zone control in combination with the room
"H NC", closed with current "off", 230 V 1012415 thermostat, item no. 1152561.
"H NC", closed with current "off", 230 V 1012452
cable 2 m long Further room thermostats and actuators: see
product range 2
2017 6.97
Stations for heating, cooling, potable water 6.i "Regumaq X/XZ/XH/K" Stations for hot potable water
for dwellings/buildings preparation
Page
6.i "Regumaq X/XZ/XH/K" Stations for hot potable water preparation

Content
Heat exchangers 6.102
"Regumaq K" Cascade control set for "Regumaq X/XZ-30" 6.103
Accessories for "Regumaq X-/XZ-30" 6.104
"Regumaq X-80" 6.107
6
Accessories for "Regumaq X-80" 6.107
"Regumaq XH" 6.110
Accessories for "Regumaq XH" 6.111
2017 6.99
6.i "Regumaq X/XZ/XH/K" Stations for hot potable water
preparation
Stations for heating, cooling, potable water "Regumaq X-30" - without circulation connection
for dwellings/buildings "Regumaq XZ-30" - with circulation connection
"Regumaq X-30" - without circulation connection Application:

Station for hot potable water preparation Electronically controlled product assembly with
with electronic controller "Regtronic RQ" heat exchanger for the hygienic heating of
with full graphic display and data output (S-bus) potable water according to the continuous flow
principle.
with Wilo high-efficiency pump Yonos PARA RS 130 15/7 PWM2 The potable water is only heated at the
for the buffer side moment when it is needed, i. e. "just in time".
Heat exchanger: 30 plates The stations are expecially suitable for
detached and semi-detached houses. They are
Discharge capacity: 2 - 45 l/min. connected to buffer storage cylinders which
depending on the set potable water temperature are heated up by solar energy, solid fuels, gas
and the existing water temperature inside the buffer storage cylinder or oil.
Depending on the temperature and the volume
Control range of potable water temperature: 20 C - 60 C flow on the potable water side, the circulation
6 Connections: G 1 flat sealing for the connection to the
pump on the heating side is speed regulated.
The plate heat exchanger complies with the
buffer and potable water circuit specifications of the European Pressure
Equipment Directive (PED).
Potable water circuit: Due to the turbulent flow, a good self-cleaning
with flow sensor, safety valve 10 bar, effect avoiding a contamination is achieved.
electronic resistance thermometer, 2 fill and drain cocks, The plate heat exchanger can be flushed using
ball valves and thermometer the fill and drain cocks integrated in the
primary and secondary circuit.
Buffer circuit: Fill and drain cocks, ball valves with and The potable water circuit is protected by a 10
without check valve and thermometer, circulation pump bar safety valve.
The components of the heat exchanger system
Dimensions (outer dimensions of insulation): have flat sealing connections, are pre-
Width: 500 mm assembled on a mounting board and leak
Height: 860 mm tested.
Depth: 260 mm The controller is wired up with the internal
electric components and features a data bus
Model with copper brazed 1381030 (S-bus) for the connection to the data logger
heat exchanger "CS-BS".
Model with heat exchanger 1381032
completely made of stainless steel
"Regumaq XZ-30" - with circulation connection Similar to "Regumaq X-30". The potable water
Station for hot potable water preparation circuit is additionally equipped with a
with electronic controller "Regtronic RQ" circulation pump for the operation in a
and connection for potable water circulation systems circulation system.
With check valve in the circulation circuit.
with Wilo high-efficiency pump Yonos PARA RS 130 15/7 PWM2 Control functions individually programmable:
for the buffer side Adjustable circulation return temperature or
adjustable time frames and daily programmes.
with Wilo pump ZRS 130 15/4-3KU
for the potable water side (circulation) Possible application of copper brazed plate
Model with copper brazed 1381035 information visit www.oventrop.com/to/
heat exchanger trinkwasseranforderung.
Tailpipe sets Page 6.66
6.100 2017
preparation
Stations for heating, cooling, potable water "Regumaq XZ-30" - with circulation connection and high-
for dwellings/buildings efficiency circulation pump
"Regumaq XZ-30" - with circulation connection and high- Similar to "Regumaq X-30". The potable water
efficiency circulation pump circuit is additionally equipped with a high-
Station for hot potable water preparation efficiency circulation pump for the operation in
with electronic controller "Regtronic RQ" a circulation system.
and connection for potable water circulation systems With check valve in the circulation circuit.
Control functions individually programmable:
with high-efficiency pump Wilo-Yonos PARA RS 130 15/7 PWM 2 Adjustable circulation return temperature or
for the buffer side adjustable time frames and daily programmes.
with high-efficiency pump Wilo-Yonos PARA Z RKC 130 15/7 Possible application of copper brazed plate
for the potable water side (circulation) heat exchangers has to be checked. For further
Model with copper brazed 1381025 trinkwasseranforderung.
heat exchanger
Model with heat exchanger
1381027 6
1 Supply from the storage cylinder

2 Return to the storage cylinder
3 Hot water
4 Cold water supply
5 Circulation return (only Regumaq XZ)
2017 6.101
Stations for heating, cooling, potable water preparation
for dwellings/buildings Heat exchangers
Heat exchangers
Replacement for "Regumaq" and "Regusol X"
copper brazed


6 30 plates up to about 55 kW 1351791 As replacement for "Regusol X-25" and
"Regumaq".
The performance dates are determined by the fixed default values

Model completely made of stainless steel
30 plates up to about 55 kW 1381068 As replacement for "Regumaq".
Retaining and fixing set 1389090 For fixing a potable water station
"Regumaq X/XZ" "Regumaq X/XZ" to a buffer storage
cylinder "Hydrocor - HP/HS".
Storage cylinder connection set 1381185 For the hydronic connection of a potable water
"Regumaq X/XZ" station "Regumaq X/XZ" fixed at a buffer
storage cylinder "Hydrocor - HP/HS".
Suitable buffer storage cylinders

"Hydrocor - HP/HS":
page 10.18
"Hydrocor" Storage cylinders: Page 10.18
6.102 2017
for dwellings/buildings "Regumaq K" Cascade control set for "Regumaq X/XZ-30"
"Regumaq K" Cascade control set for "Regumaq X/XZ-30" Application:

Cascade control set The cascade control set allows to increase the
for hot potable water preparation discharge capacity of the "Regumaq" stations
up to 120 l/min. The set does not include the
Cascade control integrated in the actuators, potable water stations.
with ball valves for potable water supply
"Regumaq K-2"
Set for the control of
2 Regumaq stations
1381082
Discharge capacity: 60 l/min.
according to the supply capacity
(see technical information "Regumaq
Stations for hot potable water preparation")
6
2 actuators with ball valves DN 25 G 1
"Regumaq K-3"
3 Regumaq stations
1381083
"Regumaq K-4"
4 Regumaq stations
1381084
"Regumaq K" Connection piping Connection piece between "Regumaq" and

cascade ball valves.
G 1 collar nut x G 1 collar nut 1389082
One connection piping is required for each
"Regumaq" station.
Switching module 1389085* The minimum draw off temperature is

monitored by the switching module. A
message can be sent to the centralised
building control system or a signalling unit.
"Regucor" Extension set zone loading The extension set allows for the connection of
consisting of: a boiler and the targeted loading of a buffer
storage cylinder.
- 1 x "Tri-D TR" Three-way diverting valve DN 25 Layering can be carried out into different buffer
- 1 x "Tri-M TR" Three-way mixing valve DN 25 storage cylinder sections.
- 2 x "Aktor M" Electromotive actuator
- 1 x Angle pattern adapter
- Seals
1383583

for dwellings/buildings Accessories for "Regumaq X-/XZ-30"
Accessories for "Regumaq X-/XZ-30"
Circulation pump 130 mm, connection thread G 1 Only supplied as replacement for the stations
"Regumaq X-30" and "Regumaq XZ-30".
for the primary circuit 1381090 With Molex plug (without pump connecting
(buffer storage cylinder circuit) cable).
Standard pump WILO RS 15/6-3,
three-stage speed control
DN 25, PN 10, 110 C
for the secondary circuit 1381091 Only supplied as replacement for the station
(potable water circuit) "Regumaq XZ-30".
WILO ZRS 15/4-3 KU With Molex plug (without pump connecting
6 three-stage speed control, plastic housing cable).
DN 25, PN 10, 110 C
Connection thread G 1
Wilo-Yonos PARA 15-7 PWM2 1389008 Only supplied as replacement for the
DN 15, PN 10, 95 C stations "Regumaq X-30/XZ-30" and
for the secondary circuit (storage cylinder circuit) "Regusol" "Regusol X-Uno/Duo 25".
or the primary circuit (storage cylinder circuit) "Regumaq"
Replacement kit high-efficiency pump The high starting current of high-efficiency

pumps places special demands on the control
consisting of: and regulation technology.
Electronic controller "Regtronic RQ" The control signal of the controller and the
VFD flow sensor 2-40 l/min. high-efficiency pump must be co-ordinated.
Controller location made of expanded polypropylene If the control signals of the controller and the
for "Regtronic RQ" pump are not co-ordinated, an operation is not
Screw-in sensor PT 1000 possible.
High-efficiency pump Wilo-Yonos PARA RS 15/7 130 PWM
for the primary circuit Accordingly, the controller must also be
replaced when replacing the asynchronous
1389095 pump of a "Regumaq X/XZ" station with a
high-efficiency pump.
Electronic controller Regtronic PQ Only supplied as replacement for the stations

"Regumaq X-30" and "Regumaq XZ-30".
cabled, replacement for "Regumaq X-30" 1381092
cabled, for "Regumaq XZ-30" 1381099
Flow sensors
for the secondary circuit 1381093 Only supplied as replacement for the stations
(potable water circuit) "Regumaq X-30" and "Regumaq XZ-30".
pulse water meter, 40 pulses/litre
connection G 1 x G 1 collar nut,
including seals
for the secondary circuit 1389901 Only supplied as replacement for the stations
(potable water circuit) "Regumaq X-30" and "Regumaq XZ-30".
VDF sensor 2-40 l/min.
connection G 1 x collar nut G 1,
including seals
for the secondary circuit 1389902 For insertion into an existing brass housing.
(potable water circuit)
VFD sensor, 2-40 l/min.
sensor head, without housing

for dwellings/buildings Accessories for "Regumaq X-/XZ-30"
Packing
unit
Ball valves, primary circuit Only supplied as replacement for the stations
for the primary circuit (buffer storage cylinder circuit) "Regumaq X-30" and "Regumaq XZ-30".
connection G 1 x G 1
Return, 1381094
blue thermometer
Supply, with check valve, 1381095

red thermometer
Ball valves, secondary circuit Only supplied as replacement for the stations
for the secondary circuit (potable water circuit) "Regumaq X-30" and "Regumaq XZ-30".
connection G 1 x G 1 collar nut
Potable water outlet hot, 1381096

6
with fill and drain cock,
red thermometer
Potable water supply cold, 1381097

blue thermometer
Potable water circulation, 1381088

red thermometer
Check valve for replacement purposes or for

Check valve (10) 1381089 subsequent installation in the potable water
Potable water circulation circulation return pipe in front of the circulation
pump.
"Sensor LW TQ" Temperature sensors
Potable water outlet, hot (T2) 1389050 Only for "Regtronic PQ".
Screw-in sensor PT 1000
"Sensor LW TH/pipe"
Potable water supply, cold (T3) 1389051 Only for "Regtronic PQ".
Sensor attached to the pipe PT 1000
Potable water outlet, hot (S2) 1389052 Only for "Regtronic RQ".
Screw-in sensor PT 1000
Conversion set for external circulation pump For the operation of "Regumaq X-30" stations
in combination with an external circulation
Pipework set with seals, ball valve, 1381080 pump.
draining valve, check valve, thermometer, Circulation pump not included.
insulation screen and fixing material.
2017 6.105
preparation
Stations for heating, cooling, potable water Tailpipe sets DN 20 for "Regusol X" and
for dwellings/buildings "Regumaq X/XZ" stations
Tailpipe sets DN 20 for "Regusol X" and Are required for the connection of the "Regusol
"Regumaq X/XZ" stations X" and "Regumaq X/XZ" stations to the storage
To be ordered separately: cylinder circuit.
Tailpipe sets 3-fold with collar nut and ring gasket
Use "Regusol" compression fittings for the
Solder tailpipes 22 mm 1367465 connection of the "Regusol X" station to the
solar circuit.
May also be used for "Regumaq X/XZ" and

accessories.
Male threaded tailpipes R 1367468
6
Isolation device for "Regumaq X/ XZ-30/ X-80" Isolating set to avoid gravity circulation in the
primary circuit (buffer circuit).
consisting of:
- 1 x "Hycocon HTZ" Regulating valve DN 40
- 1 x "Aktor M 2P L" Electromotive actuator
1381078
Accessories kit "Regumaq" for return layering For layering the temperature dependent return
for the primary circuit (buffer storage cylinder circuit) water in the lower or middle storage cylinder
section.
Consisting of three-way valve G 1, 1381066 The switching function is already pre-
flat sealing, actuator and storage cylinder sensor configured inside the controller
"Regtronic RQ".
Not suitable for cascading constructions.
Ball valve for return layering, PN 16 A set for return layering consists of:
1 x ball valve for return layering
DN 25 1381191 1 x actuator for ball valve for return layering
DN 32 1381192 1 x storage cylinder temperature sensor
DN 40 1381193 PT 1000, item no. 1369093: page 10.11
DN 50 1381194
Actuator for ball valve for return layering 1381199
storage cylinder.
- Seals
1383583
6.106 2017
preparation
Stations for heating, cooling, potable water "Regumaq X-80"
for dwellings/buildings Accessories for "Regumaq X-80"
"Regumaq X-80" Electronically controlled product assembly

Station for hot potable water preparation with heat exchanger for the hygienic heating
with electronic controller "Regtronic RQ" of potable water according to the continuous
with full graphic display and data output (S-bus) flow principle. The potable water is only
heated when it is needed, i.e. "just in time".
with Grundfos pump UPML 25-105 PWM The stations are especially suitable for multiple
Heat exchanger: 46 plates dwellings, hotels and sports facilities. They
are connected to bufferstorage cylinders
Discharge capacity: 2- 80 l/min. which are heated up by solar energy, solid
depending on the set potable water temperature fuels, gas or oil.
and the existing water temperature inside the buffer storage cylinder Depending on the temperature and the volume
flow on the potable water side, the circulation
Performance data according to SPF test procedure: pump on the heating side is speed regulated.
Discharge capacity 77 l/min. with PWH-3K The plate heat exchanger complies with the
PWC = 10 C, PWH = 60 C (setting)
Tstorage cylinder = 75 C
specifications of the European Pressure
6
Due to the turbulent flow, a good self-cleaning
Control range of potable water temperature: 20 - 60 C effect avoiding a contamination is achieved.
The plate heat exchanger can be flushed using
Connections: G 1 flat sealing for the connection to the the fill and drain cocks integrated in the
buffer and potable water circuit primary and secondary circuit.
The potable water circuit is protected by a
Potable water circuit: 10 bar safety valve.
with flow sensor, safety valve 10 bar, The components of the heat exchanger
electronic resistance thermometer, 2 fill and drain cocks system have flat sealing connections, are pre-
and ball valves assembled on a mounting board and leak
tested.
Buffer circuit: 2 fill and drain cocks, ball valves, The controller is wired up with the internal
circulation pump and throttling valve with actuator electric components and features a data bus
(S-bus) for the connection to the data logger
Dimensions (outer dimensions of insulation): "CS-BS".
Width: 660 mm
Height: 875 mm Accessories for return layering: page 6.106
Depth: 290 mm
Model with copper brazed 1381580 Possible application of copper brazed plate
heat exchanger heat exchangers has to be checked. For further
Model with nickel brazed 1381581* information visit www.oventrop.com/to/
heat exchanger trinkwasseranforderung.
Accessories for "Regumaq X-80"
"Regumaq X-80" Potable water circulation set
Connection set for the extension of the "Regumaq X-80"

station by a potable water circulation
Pipework set with seals and
ball valve with check valve
1381590
Isolation device for "Regumaq X/ XZ-30/ X-80" Isolating set to avoid gravity circulation in the
primary circuit (buffer circuit).
consisting of:
- 1 x "Hycocon HTZ" Regulating valve DN 40
- 1 x "Aktor M 2P L" Electromotive actuator
1381078
High-efficiency circulation pumps

with connection adapters for installation into the
potable water circulation set "Regumaq X-80"
Wilo-Yonos PARA Z 15/7.0 RKC 130 1381591

preparation
Stations for heating, cooling, potable water "Regumaq X-80"
for dwellings/buildings Accessories for "Regumaq X-80"
Packing
unit
Wilo-Stratos PARA Z 25/1-12 RK 180 1381592
Connection fittings for circulation pumps One connection fitting, item no. 1381585, is
installed on site required for the integration of a G 1 circulation
pump installed on site into the potable water
G 1 female x G 1 female (10) 1381585* circulation set, item no. 1381590. One
connection fitting, item no. 1381587, and one
fitting, item no. 1359091, are required for a
6 G 1 circulation pump.
G 1 female x G 1 female (10) 1381587*
G 1 female x G 1 c/nut (10) 1359091

32 mm

for dwellings/buildings "Aquastrom P" Water sampling valve
Packing
unit
Connection fittings
Tailpipe (bronze), flat sealing, with male thread according to

EN 10226-1, collar nut and ring gasket (EPDM)
R 1 x G 1 (collar nut) (5) 4201475
6
"Aquastrom P" Water sampling valve Flame resistant and chemically disinfectable
water sampling valve for hygienic-
DN 8 (10) 4209102 microbiologic tests according to DIN EN ISO
19458, DVGW W 551, TrinkwV (German Decree
for Potable Water) and VDI 6023.
PN 10.
Valve body made of bronze, stem made of

stainless steel, metal to metal sealing, with
additional seal made of heat-resistant PTFE,
with metal plate for marking the water sampling
point according to DIN EN ISO 19458 chapter
3.
All models with discharge elbow made of

stainless steel.
Operation with the help of the Allen key
supplied with the valve.
High-efficiency pump with connection thread G 1 Are only supplied as replacement for the
Regusol X-80 stations.
Grundfos UPML 25-105 180 PWM-C 1381599*
DN 25, PN 10, 95 C
for the primary circuit (storage cylinder circuit) "Regumaq X-80"
Heat exchanger Are only supplied as replacement for the

46 plates
Connection distance 470 x 63 mm
4 X G 1 male thread, flat sealing
Heat exchanger 1381595*

copper brazed
Heat exchanger nickel brazed 1381596*
Electronic controller "Regtronic RQ" Are only supplied as replacement for the
cabled, replacement for "Regumaq X-80"
1381597*

(> 1A).

for dwellings/buildings "Regumaq XH"
"Regumaq XH" Hydraulically controlled product assembly with

Station for hot potable water preparation heat exchanger for the hygienic heating of
potable water according to the continuous flow
with high-efficiency pump Wilo-Yonos PARA RS 15/7 PWM2 principle.
in the buffer circuit The potable water is only heated at the
moment when it is needed, i.e. "just in time".
Recommended discharge capacity: 15-20 l/min.,
depending on the set potable water temperature For the connection to buffer storage cylinders
and the existing water temperature inside the buffer storage cylinder which are heated up by solar energy, solid
fuels, oil or gas.
Control range of potable water temperature: 40 C - 60 C
PN 10 (at 20 C), up to 95 C.
Connections:
G flat sealing for the connection to the potable water circuit Depending on the draw off capacity on the
6 G 1 flat sealing for the connection to the buffer circuit potable water side, the circulation pump on the
heating side is switched on and the volume
Potable water circuit: flow is regulated.
consisting of flow controller, connection for circulation pipe (G ),
heat exchanger, temperature sensor and flow switch The soldered plate heat exchanger complies
with the specifications of the European
Buffer circuit: Pressure Equipment Directive (PED).
consisting of storage cylinder pump, heat exchanger, Due to the turbulent flow, a good self-cleaning
venting valve, flow controller and thermostatic valve effect avoiding a contamination is achieved.
Dimensions (outer dimensions of insulation): The components of the heat exchanger system
Width: 400 mm have flat sealing connections, are pre-
Height: 690 mm assembled on a carrier board and leak tested.
Depth: 190 mm
The product assembly is wired and ready for
"Regumaq XH" 1381042 plug-in.
Heat exchanger made of stainless steel, copper brazed With wall bracket.
The "Regumaq XH" is certified by the SVGW

under certificate no. 1212-6108.

1 Supply from the buffer storage cylinder

2 Return to the buffer storage cylinder
3 Hot water
4 Cold water supply
5 Circulation pipe - return
(optionally with 1381047 or 1381049)
6.110 2017
for dwellings/buildings Accessories for "Regumaq XH"
Accessories for "Regumaq XH"
"Regumaq XH" 1381047

Potable water circulation set
Connection set with circulation pump
Wilo Star Z Nova C and time switch
for the extension of the "Regumaq XH"

as above but without circulation pump
and without time switch 6
Flow switch 1381046

for "Regumaq" item no. 1381040
without high-effiency pump
Suitable for:
Flow switch 1381043 "Regumaq XH" 1381042
for add-on groups for hot potable water preparation "Regucor WH" 1383460/65
with high-efficiency pump "Regucor WHS" 1383550/55/62/67
1383645
"Regumaq XH" Filter insert 1381044 For the protection of the potable water circuit
against contaminations.
Mesh size 0.5 mm,
made of stainless steel
The high starting current of high-efficiency

Upgrade kit high-efficiency pumps 1381048 pumps places special demands on the control
consisting of: and regulation technology. Accordingly, it is
not only necessary to replace the
Electronic box with signal, power supply cords and flow switch asynchronous pump of the "Regumaq XH"
High efficiency pump Wilo-Yonos PARA ST 15/7 130 PWM2 for the station with a high-efficiency pump, but the
primary circuit (buffer storage cylinder circuit) flow switch also has to be replaced and
connected to the electronic box.
Suitable for:
"Regucor WHS" 1383560, 1383565
Suitable for:
Circulation pump 130 mm 1383582 "Regumaq XH" 1381042
Wilo-Yonos ST 15/7 130 PWM2 "Regucor WH" 1383460/65
Connection thread G 1 for the "Regucor WHS" 1383550/55/62/67
primary circuit/buffer storage cylinder circuit 1383645
Flow controller Suitable for:

"Regumaq XH" 1381040/42
1381045 "Regucor WH" 1383460/65
"Regucor "WHS"1383550/55/62/67
1383645
2017 6.111
for dwellings/buildings 6.j "Regudis WK" Cooling stations
Page

Content
"Regudis WK" Transmission station for cooling 6.116
Accessories for transmission station "Regudis WK" 6.116
2017 6.113
Stations for heating, cooling, potable water 6.j "Regudis WK" Cooling stations
Primary side
Secondary side
6 Secondary side
Regudis WK Regudis WK
Cooling network
System illustration Regudis WK in combination with fan convector and surface cooling
1 Cold storage cylinder

2 Pump group e.g. Regumat M3-220
3 Regudis WK
4 Fan convectors
5 Surface cooling
6.114 2017
Stations for heating, cooling, potable water 6.j "Regudis WK" Cooling stations
A B C D Regudis WK Transmission station

consisting of:
1 Plate heat exchanger
2 Circulation pump
13 12 3 Cocon QTZ Pressure independent control
valve with actuator
4 Strainer
5 Electronic controller
6 Expansion tank
4 7 Safety valve
10 8 Pressure gauge
9 Draining valves
3 10 Cold insulation (not illustrated)
5
Ball valve connection set
consisting of:
6
2 11 Plastic cover not illustrated
12 Flypass 4TZ Connection tting
1 13 Ball valve connection set
6
Connections:
Secondary side
7 A Return dwelling side
B Supply dwelling side
8 Primary side
C Supply local/district cooling network
9 D Local/district cooling network
System illustration transmission station Regudis WK
2017 6.115
Stations for heating, cooling, potable water "Regudis WK" Transmission station for cooling
for dwellings/buildings Accessories for transmission station "Regudis WK"
"Regudis WK" Transmission station for cooling Tansmission station with heat exchanger
for indirect cooling of living areas (for
consisting of: instance with fan convectors).
-Electronic controller
-Plate heat exchanger The station regulates the return temperature
-Pressure independent control valve in the primary and secondary circuit to the
"Cocon QTZ" with actuator temperature set in the controller. Regulation to
-Strainers (on primary and secondary side) an adjustable temperature difference between
-Pressure gauge the supply and return is also possible.
-Safety valve The electronic control is optimised to a
-Expansion tank maximum
-Draining valves temperature difference across the complete
-Cold insulation performance range. This way, a high efficiency
-Plastic cover (white) of the installation is guaranteed.
6 Performance range 1 6 kW 1341630* Nominal size: DN 25
Performance range 2 10 kW 1341631* Operating pressure:
Performance range 3 15 kW 1341632* Primary side: PN 16
Secondary side: Safety valve 3 bar
Display range of the pressure gauge: 0 - 4 bar
Connections: G 1 (collar nut, flat sealing)
Primary volume flow:

Performance range 1: 830 l/h
(with primary: 6/12 C, secondary: 8/14 C)
530 mm x 700 mm x 160 mm

Accessories for transmission station "Regudis WK"
Ball valve connection set 1341680* For the isolation of all connections of the
"Regudis WK" station.
Connection to the pipework: G 1 flat sealing
2 ball valves mounted onto a bracket.
"Flypass 4TZ" Connection fitting 1341681* The Oventrop "Flypass" connection fitting is
used for the isolation and flushing of the flow
and return pipework serving the "Regudis"
station.
The connection fitting can be converted to
bypass operation.
Connection to the pipework: G 1 flat sealing

for dwellings/buildings 6.k Further associated products
Page

Content
"Optibal P" Pump ball valves 6.118
"Optibal" Ball valves 6.118
Insulations 6.118
Thermometer conversion sets 6.118
"Optibal" Ball valves with press connection 6.119
Accessories for the connection of the boiler and 6.120
"MSM-Block" Boiler safety device 6.123 6
"Expa-Con" Valves with lead sealable cap 6.123
"Optiflex" Fill and drain ball valves 6.124
"Optiflex" Fill and drain ball valves for solar 6.125
Accessories 6.125
Ball valves with hose connection 6.125
Fiill and drain ball valves made of bronze 6.126
Draining and venting valves 6.126
Fill and drain cocks 6.127
100
200
Accessories 6.127
300
400
Gauge cocks 6.128

500
Gauge cock, button type 6.128

Accessories 6.128
Gauge isolating valves 6.129
Accessories 6.129
Check valves 6.130
"Flowstop" Check valves 6.130
Check valves made of bronze 6.130
Differential pressure relief valves PN 10 6.131
2017 6.117
"Optibal P" Pump ball valves
"Optibal" Ball valves
Stations for heating, cooling, potable water Insulations
for dwellings/buildings Thermometer conversion sets
Packing
unit
"Optibal P" Pump ball valves Max. opening pressure: 20 mbar

brass, nickel plated,
(valves with marking "HT" can also be used up to 150 C) Collar nuts and seals: pages 6.67 and 6.68
with check valve, PN 10, max. 120 C

installation at the pump inlet
DN 25 Rp 1 x G 1* (10) 1078171
DN 32 Rp 1 x G 2* (10) 1078172
DN 32 Rp 1 x G 1* (10) 1078173
without check valve
6 DN 25
DN 32
Rp 1
Rp 1
x G 1*
x G 2*
(10) 1078371
(10) 1078372
DN 32 Rp 1 x G 1* (10) 1078373
* pump connection
"Optibal" Ball valves The heights are identical with the pump ball
brass, nickel plated valves "Optibal P".
extended plastic handle (anthracite),
for the return pipe
DN 25 Rp 1 (10) 1078708
DN 32 Rp 1 (5) 1078710
Insulations Meet the requirements of the German Energy

Saving Directive according to appendix 5, table
for brass ball valves "Optibal" 1, line 5.
with extended plastic handle
ball valves with female thread (item no. 10771/80/87/91..) Building material class B2 according to DIN
4102.
DN 25 1078094
DN 32 1078095
for pump ball valves "Optibal P"
DN 25 1078194
DN 32 1078195
Thermometer conversion sets
for item no. (10) 1078382

1078171/ 72/ 73, 1078371/ 72/ 73,
1078708/ 10/ 61/ 62 and
4208806/ 08, 4208854/ 55, 4208906/ 08
Thermometer conversion set, red and blue

red thermometer for supply pipe ("Optibal P")
and blue thermometer for return pipe ("Optibal")
DN 25/ 32 (10) 1078182
6.118 2017
Stations for heating, cooling, potable water "Optibal PK" Isolating set
for dwellings/buildings "Optibal" Ball valves with press connection
Packing
unit
"Optibal PK" Isolating set Suitable insulations:

Supply: Pump ball valve with check valve and for 1353583, DN 25:
pump ball valve with thermometer (red) 63 as well as 2 x 1078194 + 1 x 1078094
collar nuts and seals for the pump flanges
Return: Female threaded ball valve with thermometer for 1353584, DN 32:
(blue) 63 2 x 1078195 + 1 x 1078095
DN 25 G 1* 1353583
DN 32 G 2* 1353584
*pump connection
6
"Optibal" Ball valves with press connection PN 16, max. 120 C
for the return pipe,
DN 25 28 mm (10) 1078761
DN 32 35 mm (5) 1078762
Angle pattern ball valve DN 20
G 1 c/nut x G 1 M 1351705
2017 6.119
Stations for heating, cooling, potable water Accessories for the connection of the boiler and
for dwellings/buildings the storage cylinder to the pipework
Packing
unit
Accessories for the connection of the boiler and

Storage cylinder loading set DN 25
1359050
Connection nipple G 1 M x Rp 1
Elbow G 1 x G 1 collar nut
Corrugated metal hose, L = 1100 m,
may be cut to required length
Elbow G 1 collar nut x G 1
Pump connection nipple G 1 F x G 1
Pump with cable
Angle pattern non-return check valve
6 G 1 collar nut x pump flange G 1
Collar nut G 1
Set of seals
Brass connection pieces
Three-way mixing valve For flow temperature control.

Manual setting, actuator (see page 6.12) can
Rp F, Kv 6 (10) 1350106 be mounted subsequently.
Rp 1 F, Kv 12 (10) 1350108 (Do not use an actuator with "plug & play"
technology!)
Connection elbows
Connection elbow with (25) 1359060

pump flange
G 1 x pump flange for G 1
40 x 35 mm
suitable collar nut
item no. 1359099
G1xG1 (25) 1359061

35 x 35 mm
G 1 x G 1 c/nut (25) 1359062

37 x 35 mm
G 1 c/nut x G 1 c/nut (25) 1359063

37 x 35 mm
G 1 c/nut x G 1 M x G F (25) 1359064

37 x 35 mm
G 1 c/nut x G 1 c/nut x G F (25) 1359065

37 x 35 mm
with fill and drain ball valve "Optiflex"
G 1 c/nut x G 1 M (25) 1359066

37 x 35 mm
with fill and drain ball valve "Optiflex"
G 1 c/nut x G 1 c/nut (25) 1359067

37 x 35 mm
G 1 c/nut x R 1 M (25) 1359043

40 x 49 mm
6.120 2017
Packing
unit
with pump flange, long
G 1 c/nut x pump flange (25) 1359068

for G 1
88 x 35 mm
R vent plug and
R blind plug
suitable collar nut item no. 1359099
R blind plug
G 1 c/nut x G 1 M (25) 1359069

90 x 35 mm
2 x G 1 c/nut (25) 1359042

6
88 x 35 mm
with fill and drain ball valve (25) 1359073

"Optiflex"
2 x G 1 c/nut
88 x 35 mm
Reducer
G 1 F x G 1 M (20) 1359041
31.5 mm
Double fitting
both ports G 1 c/nut (10) 1359085

30 mm
G F x G c/nut (10) 1359086
19.5 mm
Check valve
G 1 M x pump flange for G 1 (50) 1359070

31 mm
Angle pattern non-return check valves
G 1 c/nut x G 1 M (20) 1359071

44 x 35 mm
with opening device and fill and drain ball valve "Optiflex"
G 1 c/nut x pump flange for G 1 (12) 1359072

47 x 40 mm
T-piece
G 1 x G 1 x G 1 c/nut (10) 1359080
G 1 x G 1 c/nut x G 1 (10) 1359081
2017 6.121
Packing
unit
Pump connection nipple
G 1 F x G 1 M (10) 1359090
32 mm
G 1 female x G 1 c/nut (10) 1359091

32 mm
Connection nipple
G 1 M x Rp , 34 mm (20) 1359095
G 1 M x Rp 1, 37 mm (20) 1359096
G 1 M x Rp 1 , 40 mm (20) 1359097
6
Double nipple
R 1 x G 1, 33 mm (20) 1359094
G 1 x G 1, 33 mm (20) 1359098
6-way block with pump flange
G 1, G 1 M and 4 x G 1 M 1359040
Extension
both ports G 1 M
51 mm (10) 1359101
65 mm (10) 1359102
89 mm (10) 1359103
104 mm (10) 1359104
125 mm (10) 1359105
6.122 2017
"MSM-Block" Boiler safety device
Stations for heating, cooling, potable water Heating system filling station
for dwellings/buildings "Expa-Con" Valves with lead sealable cap
Packing
unit
"MSM-Block" Boiler safety device Complete safety device according to DIN EN

Airvent with automatic shut-off 12828.
Pressure gauge with automatic shut-off
Insulation
DN 25
Female threaded connection Rp 1
Diaphragm safety valve 3.0 bar 1351062
Male threaded connection G 1, flat sealing
Diaphragm safety valve 3.0 bar 1351072

6
Heating system filling station Application:
Filling combination according to DIN EN 1717 for Potable water installations PN 10,
heating systems, consisting of strainer, pressure Max. water temperature:
reducer, system separator type BA and drain water 30 C at the inlet port
connection, with isolating facility for maintenance. 65 C at the outlet port
Brass body, cartridges of system separator and
pressure reducer made of plastic Max. operating pressure ps: 10 bar
Outlet pressure adjustable between
DN 15 G 1055004 1 and 5 bar.
(factory preset to 1.5 bar).
DVGW certified.
"Expa-Con" Valves with lead sealable cap Required according to DIN EN 12828.
brass For control, maintenance and possible
replacement of diaphragm expansion tanks.
DN 20 *Rp (25) 1089006
DN 20 *Rp 1 (25) 1089008 Technical data:
DN 25 *Rp 1 (10) 1089052 Nominal pressure: PN 10
DN 32 *Rp 1 (10) 1089010 Max. operating temperature ts: 120 C
DN 40 *Rp 1 (10) 1089012 Draining capacity: kvs = 1.25
* connection to expansion tank
Quick coupling for diaphragm expansion tank For the automatic separation of the
expansion tank and the system.
DN 20, G F x G M (25) 1088806
2017 6.123
Stations for heating, cooling, potable water 6.k Further associated products
for dwellings/buildings "Optiflex" Fill and drain ball valves
Packing
unit
"Optiflex" Fill and drain ball valves Application:

brass, handle with stop For filling and draining of heating and cooling
with male thread systems, boilers, radiators and pipework.
self sealing, with coutnernut, The brass ball valve is suitable for water and
with hose connection (soft seal) water and glycol mixtures up to PN 16
and cap and 120 C.
DN 10 (50) 1033313 Also suitable for connection of plastic and

DN 15 (50) 1033314 copper pipes.
DN 20 (25) 1033316
DN 25 (10) 1033308 Compression fittings and reinforcing sleeves:
pages 1.141 -1.143
6 DN 15 (50 pieces loosely packed) (50) 1033315 If not stated otherwise the hose connection of
the sizes DN 10 and DN 15 is made of plastic.
DN 15 brass hose connection (50) 1034315

DN 10 nickel plated (50) 1033351
(50 pieces loosely packed)
with cap
DN 10 (50) 1033413
DN 15 (50) 1033414

with female thread

and cap
DN 15 (50) 1033814
with cap
DN 15 DN 15 (50) 1033914
"Optiflex" Fill and drain ball valves for potable water Application:
brass, nickel plated from outside,
handle with stop, with male thread, Potable water installations, PN 10,
self sealing, with counternut and cap DN 15 R (reduced).
Max. water temperature: 90 C
DN 15 G (50) 1033152
DVGW tested and certified.
Further applications for heating systems see

above.
6.124 2017
"Optiflex" Fill and drain ball valves for solar
Stations for heating, cooling, potable water Accessories
for dwellings/buildings Ball valves with hose connection
Packing
unit
"Optiflex" Fill and drain ball valves for solar Application:

brass, handle with stop For filling and draining of heating and cooling
with male thread, self sealing, with counternut systems, boilers, radiators and pipework also
in solar plants.
and cap The brass ball valve is suitable for water and
mixtures of water and glycol up to PN 16 and
DN 15 nickel plated (50) 1033372 150 C, for short periods up to 180 C.
Also suitable for connection of plastic and

copper pipes.
Angle pattern, Compression fittings and reinforcing sleeves:

with hose connection (soft seal) pages 1.140 -1.143
and cap
The hose connection is made of plastic.
6
Accessories
Hose connection made of brass Female thread of the collar nut
DN 10 + DN 15 (50) 1034552 G
DN 20 (25) 1034553 G1
DN 25 (25) 1034554 G 1
made of plastic
DN 10 + DN 15 (50) 1034562 G


DN 20 (25) 1034053 G1
DN 25 (25) 1034008 G 1
Washer (for above caps) Female thread of the cap

DN 20 (10) 1034093 G1
DN 25 (10) 1034094 G 1
Ball valves with hose connection Application:

Water, water and glycol mixtures, heating oil
brass nickel plated, full flow, and fuels, saturated steam and air.
with double FKM O-ring seal,
ball hard-chrome plated, PTFE seats, Max. operating pressure ps: 16 bar (PN 16), for
inlet port female thread according to EN 10226-1, air and harmless gases (not for gaseous fluids
outlet port hose connection and cap with fixing loop group 1 according to directive 2014/68/EU)
10 bar.
DN 15 (25) 1036154 Operating temperature ts: -20 C up to +120 C
DN 20 (10) 1036156
DN 25 (5) 1036158 Attention: Prevent formation of ice as it can
2017 6.125
Stations for heating, cooling, potable water Fiill and drain ball valves made of bronze
for dwellings/buildings Draining and venting valves
Packing
unit
Fiill and drain ball valves made of bronze Application:

with male thread Fluids, steam and treated heating water
(e. g. district heating).
handle with stop Max. operating pressure ps: 16 bar (PN 16)
with hose connection and cap Operating temperature ts: 0 C up to 150 C
Operation of the fill and drain ball valves by use
DN 10 (50) 1032403 of the grey handle.
OV
DN 15 (50) 1032404
Accessories: page 6.125
Handle for fill and drain ball valves 1033091 For further accessories see "Optiflex".
6
Draining and venting valves Application:
brass Central heating systems PN 16 up to 120 C.
Key, item no. 1103051: page 1.138
with metal seal
G (50) 1038002
G (50) 1038003
6.126 2017
Stations for heating, cooling, potable water Fill and drain cocks
Packing
unit
Fill and drain cocks Application:

Bronze models: Fluids, steam and treated
Heavy pattern - bronze, PN 16 heating water (e.g. district heating) up to
based on DIN 3848 PN 16 and 150 C, for short periods up to
with hose connection and cap 180 C.
Re-adjustment of the fill and drain cocks may
OV
DN 10 (50) 1032003 become necessary to guarantee tightness

DN 15 (50) 1032004 during operation, for instance in case of:
DN 20 (25) 1032006
DN 25 (10) 1032008 - operation at low temperatures
- extreme temperature changes
- use of creeping additives in heat transfer
liquids

6
Accessories

DN 10 (50) 1034003 G
DN 20 (25) 1034053 G1
DN 25 (25) 1034008 G 1
Square spanner
DN 10/DN 15 (10) 1035004 Spanner size: 12 mm

Washer (for above caps) Female thread of the cap
DN 10 (10) 1034091 G
DN 20 (10) 1034093 G1
DN 25 (10) 1034094 G 1
Hose connection Female thread of the collar nut
DN 10 (50) 1034551 G (for hose DN 15)

DN 15 (50) 1034504 G
DN 20 (50) 1034506 G1
DN 25 (25) 1034508 G 1
2017 6.127
Gauge cocks
Stations for heating, cooling, potable water Gauge cock, button type
Packing
unit
Gauge cocks Application:

brass, Central heating systems up to 120 C and
with gland, PN 10 as well as cooling systems.
with female thread
PN 10 Re-adjustment of the gauge cocks may
become necessary to guarantee tightness
DN 10 GxG* (20) 1110003 during operation, for instance in case of:
DN 8 G (20) 1110102
DN 10 G (20) 1110103 - operation at low temperatures
DN 15 G (20) 1110104 - extreme temperature changes
DN 15 (PN25) G (20) 1110174 - use of creeping additives in heat transfer
liquids
* connection for pressure gauge
PN 10, chrome plated
6 For further information see
DN 15 G (20) 1110152
with female thread

with test flange 25 x 60 mm
DN 15 G (5) 1110204
Gauge cock, button type Water: PN 25, 0 up to 90 C

brass, nickel plated, Gas: MOP5, -20 C up to +60 C
both ports female thread Rp according to EN 10226-1, DVGW certified according to VP 308.
(outlet port also corresponds to pressure gauge threaded bore Pressure is only measured when the button is
according to DIN EN 837-1) pushed down. System separation is
automatically achieved by releasing the button.
DN 15 (25) 1110504 In this position, the gauge cock is
depressurized.
Accessories
Connection piece
brass
with rotating collar nut,

with graphite washer for differential pressure gauge
suitable for item no. 11100.. 11105..
DN 15 (40) 1111904
Plastic handle
red, for gauge cock
DN 10 + DN 15 (10) 1905051 Connection thread and length of handle

M 5 x 50 mm.
Graphite washer
for pressure gauges, (50) 1905551

gauge cocks and connection pieces
6.128 2017
Stations for heating, cooling, potable water Gauge isolating valves
Packing
unit
Gauge isolating valves Application:

DN 15, G , connecting nut x spigot
for the connection of pressure gauges Fluids, gas and steam to which the valve
to installations materials are resistant.
Brass/stainless steel, PN 250 **:

Valve DIN 16270 - A - 20 Ms 1115004 Body, connecting nut, collar nut and test
brass/stainless steel, PN 250 spigot/flange made of brass.
(without test connection) Stem and venting screw made of stainless
Valve DIN 16270 - A - 10 St 1116004 steel, seal packing made of PTFE, handwheel
steel/stainless steel, PN 400 made of plastic.
(without test connection) Operating temperature ts: -10 C* up to -120 C
Steel/stainless steel, PN 400**:

Valve DIN 16271 - A - 20 Ms 1115104 Body, connecting nut, collar nut and test
spigot/flange made of steel, stem and venting
6
brass/stainless steel, PN 250
with test spigot M 20 x 1.5 screw made of stainless steel, seal packing
Valve DIN 16271 - A - 10 St 1116104 made of graphite, handwheel made of plastic.
steel/stainless steel, PN 400 Operating temperature ts: -10 C* up to -120 C
with test spigot M 20 x 1.5
*Prevent formation of ice
**See pressure-temperature chart
Valve (similar to DIN 16271 - A - 20 Ms) 1115204
brass/stainless steel, PN 250
with test spigot M 20 x 60 mm
Valve (similar to DIN 16271 - A - 10 St) 1116204
steel/stainless steel, PN 400
with test spigot M 20 x 1.5
Accessories
Connecting nut DIN 16283 G x M 20 x 1.5 left hand
brass 1117004
steel 1117104
Weldable steel nipple (50) 1117204

with collar nut
Copper washer DIN 16528 1905552

for gauge isolating valves

Check valves
Stations for heating, cooling, potable water "Flowstop" Check valves
for dwellings/buildings Check valves made of bronze
Packing
unit
Check valves Application:

brass Central heating systems PN 10 with circulation
installation at the pump outlet pump, up to 120 C.
SVE Opening pressure: 20 mbar (~ 200 mm WG)

Check valves avoid gravity circulation in
Z DN 20 *G 1 (10) 1070006 different heating systems with the circulation
A
DN 25 *G 1 (10) 1070008 pump being switched off.
DN 32 *G 2 (10) 1070010
with automatic deaeration
DN 25 *G 1 (10) 1070308
6 DN 32 *G 2 (10) 1070310
SVA For the direct connection to the circulation

pump. Valve cover made of plastic, setting
DN 25 *G 1 (10) 1070108 to gravity circulation.
DN 32 *G 2 (10) 1070110
SVI
DN 25 *G 1 (10) 1070208
DN 32 *G 2 (10) 1070210
"Flowstop" Check valves

brass
installation at the pump inlet
SFA
DN 25 *G 1 (10) 1070408
* = pump connection
Check valves made of bronze Application:

Central heating systems PN 10 with circulation
Universal model pump, up to 120 C.
SVU Opening pressure: 20 mbar (~ 200 mm WG)
For vertical installation as angle pattern,
DN 25 1071008 straight pattern or three-way valve. Plug and
DN 32 1071010 valve disc made of brass, soft seal, setting to
DN 40 1071012 gravity circulation.
DN 50 1071016

Stations for heating, cooling, potable water 6.k Further associated products
for dwellings/buildings Differential pressure relief valves PN 10
Differential pressure relief valves PN 10 Application:

bronze/brass Pump hot water heating systems PN 10,
120 C, to reduce flow noises.
DN 20 1085206 Central heating systems with gas boilers to
100
200 DN 25 1085208 maintain a minimum water circulation.
Range of setting: 50 - 500 mbar
300
400
500
DN 32 1085210
(~ 0.5 - 5.0 m WG)
Preset at works to 200 mbar.

2017 6.131
Local and district heating technology Content
Page
7.a Local and district heating technology

Content 7.03
Construction "Regudis H-HT" 7.07
"Regudis H-HT" Transmission station 7.08
Accessories for "Regudis H-HT" 7.08
Further products for local and district heating technology 7.10
2017 7.01
Local and district heating technology 7.a Local and district heating technology
Page

Content
Construction "Regudis H-HT" 7.07
"Regudis H-HT" Transmission station 7.08
Accessories for "Regudis H-HT" 7.08
Further products for local and district heating technology 7.10
2017 7.03
Local and district heating technology System illustration
Regumat M3-130 DN 20
Item no. 1355257
Local/district
heating network
Regudis H-HT
Item no. 1391025
Diaphragm expansion tank

Item no. 1399091
7
Hydrocor WM
Item no. 1395010
Regumat S-130 DN 20
Item no. 1355057
System illustration: Integration of a transmission station by the direct connection of a Regumat station DN 20 to the transmission station
Storage cylinder connection via a Regumat station DN 20
Item no. 1355257
Local/district
heating network
Regudis H-HT
Item no. 1391025
Diaphragm expansion tank
Item no. 1399091
Hydrocor WM
Item no. 1395010
Storage cylinder loading

set DN 25 with corrugated
metal pipe which may be
cut to required length
System illustration: Integration of a transmission station by the direct connection of a Regumat station DN 20 to the transmission station
Storage cylinder connection via storage cylinder loading set
7.04 2017
Item no. 1355257
Local/district
heating network
Regudis H-HT Regumat DN 25

Item no. 1391025
Hydrocor WM
Item no. 1395010
7
Regudis H-HT
Distributor
Diaphragm
expansion tank
Item no. 1399091
System illustration: Integration of a transmission station with distributor Regudis H-HT and Regumat stations DN 20 and DN 25
Local/district
heating network Regudis H-HT
Item no. 1391025
Regumat DN 25 Diaphragm
expansion tank
Item no. 1399091
Hydrocor WM
Item no. 1395010
Regudis H-HT
Distributor
System illustration: Integration of a transmission station with distributor Regudis H-HT and Regumat stations DN 25
2017 7.05
Regumat
Local/district M3-130
heating network DN 20
Regumat DN 25
Item no.
1355257
Regudis H-HT
Item no.
1391025
Hydrocor WM
7 Item no. 1395010
Diaphragm
expansion tank
Item no. 1399091
System illustration: Integration of a transmission station via exible corrugated metal pipes with Regumat stations DN 20 and DN 25
Connection with distributor and corrugated metal pipe
Item no. 1355257
Local/district Regumat S-130 DN 20

heating network Item no. 1355057
Regudis H-HT
Item no.
1391025
Hydrocor WM
Item no. 1395010
Diaphragm
expansion tank
Item no. 1399091
System illustration: Integration of a transmission station via exible corrugated metal pipes with Regumat stations DN 20
Direct connection with corrugated metal pipe
7.06 2017
Local and district heating technology Construction "Regudis H-HT"
A B D
Regudis H-HT Transmission station
consisting of:
1. Plate heat exchanger
2. Pressure independent control valve
Cocon QTZ with actuator
3. Strainer with venting and draining
3
valve
3 4. Spacers for heat meter (110 mm)
6 5.
6.
Pressure gauge
Safety group
7. Electronic controller
8. Thermal insulation housing made of
expanded polypropylene
1
2
5
Ball valve connection set
9 consisting of:
9. Ball valves with thermometers (2x)
on xing plate
10 10. Thermal insulation housing made of
expanded polypropylene
A B D
Connections:
From the top and/or from below
A Local/district heating supply and
potable water storage cylinder supply
B Local/district heating return and
potable water storage cylinder return
C Domestic connection supply
D Domestic connection return
System illustration: Regudis H-HT Transmission station
2017 7.07
"Regudis H-HT" Transmission station
Local and district heating technology Accessories for "Regudis H-HT"
"Regudis H-HT" Transmission station Transmission station with plate heat exchanger
consisting of: for indirect heat transmission from a local or
district heating network to the potable water
-Plate heat exchanger (copper brazed) and heating installation of detached and semi-
-Pressure independent control valve detached houses.
"Cocon QTZ" with actuator
-Strainer For use in closed local and district heating
-Pressure gauge networks, for opertation with non-aggressive,
-Safety valve harmless fluids (e.g. water or suitable water
-Draining valve and glycol mixtures according to VDI 2035/
-Electronic controller NORM 5195).
-Thermal insulation housing made of expanded polypropylene
-Outside temperature sensor and 2 additional Operating pressure:
temperature sensors (PT 1000) Primary side: PN 10
Secondary side: Safety valve 3 bar
Max. primary temperature: 90 C
Display range of the pressure gauge: 0 - 10 bar
A potable water storage cylinder with internal

7 heat exchanger (e.g. "Hydrocor WM") can be
connected to the primary side.
With electronic controller for weather guided

control of the flow temperature of the heating
system and simultaneous limitation of the
return temperature to the heat network.
Hot water priority function or parallel operation
to the heating circuit.
DN 20, max. 45 kW 1391025 Performance range:
Max. 30 kW:
with primary: 75/45 C, secondary: 65/35 C
Max. 45 kW:
Heating network and domestic connection:
G
470 mm x 680 mm x 295 mm
DN 25, max. 120 kW 1391035* Performance range:

in preparation Max. 80 kW:
Max. 120 kW:
Heating network and domestic connection:
G1
620 mm x 900 mm x 350 mm
Accessories for "Regudis H-HT"
Ball valve connection set For the connection of the "Regudis H-HT"
consisting of: station to the local/district heating and
-Ball valve with thermometer (2 x) domestic network.
-Bracket
-Thermal insulation housing Connection thread: G collar nut
made of expanded polypropylene G 1 male thread, flat sealing
Thermal insulation housing made of expanded
for DN 20 1399090 polypropylene.
for DN 25 1399095* Thermometer display range: 0 - 120 C
"Regudis H-HT" Distributor For the connection of 2 "Regumat" stations

with thermal insulation and wall bracket DN 25 to the local heating station
"Regudis H-HT".
for DN 20 1394010*
for DN 25 1394015*

Local and district heating technology 7.a Local and district heating technology
Regumat 130/180 DN 20/ DN 25 For the connection of the transmission

Product assemblies with high-efciency pumps station Regudis H-HT to the heating
with and without three-way mixing valve system and loading of the potable water
storage cylinder for indirect hot potable
water preparation.
From page 6.07
Distributor
Module distributor For the distribution of the volume ows

Hydronic header/distributor combination of the transmission station to up to
8 heating circuits.
Page 6.62
"Hydrocor - WM" Thermal insulation made of polyurethane rigid
Monovalent potable water storage cylinder foam.
with an internal tube heat exchanger 7
Type 120 1395010 Max. operating temperature: 95 C
Energy efficiency class B
Diaphragm expansion tank For wall attachment G male thread.
Nominal volume 35 l 1399091

Corrugated metal pipe made of stainless steel Flexible corrugated metal pipe made of
with thermal insulation, both ports G 1 collar nut, stainless steel for the connection of system
flat sealing, may be cut to required length, components to the heating technology.
with seals Max. operating pressure: 9 bar
500 mm 1394020* Thermal insulation made of synthetic rubber.
1000 mm 1394021*
2000 mm 1394022*
3000 mm 1394023*
Reducer Further accessories: page 6.120
G male x G 1 male 1394090*

G 1 male x G 1 male 1394091*

Further products for local and district heating
Local and district heating technology technology
Hycocon HTZ Regulating valves PN 16 In combination with an actuator for the

DN 20 control of potable water storage
DN 25 cylinder loading for direct hot potable
water preparation
(system illustration page 10.04).
Page 3.14
Aktor T2 P Electrothermal actuator H NC Page 1.26

closed with current off, 230 V
Connecting cable 5 m
System illustration: District heating/biomass plant (example)
7.10 2017
Further products for local and district heating
Local and district heating technology technology
Hydrocor - HP Buffer storage cylinder Hydrocor storage cylinders for storage

Hydrocor - HS Solar buffer storage cylinder of heating water and potable water.
Hydrocor - WB Bivalent potable water storage cylinder Page 10.18.
AF Valves for thermostats Page 1.53

Valves with fine presetting
Hydrocontrol VTR/VFC Double regulating Page 3.26

and commissioning valves
GG25
PN1
6 bronze/cast iron
OV
0
2
4
0 6
2
4
6
0
Cocon QTR Pressure independent control valves PN 25 Page 3.56
Hydromat DTR Differential pressure regulators Page 3.37
Hygate Gate valves DIN 3352 Page 5.14
Optibal High pressure ball valves PN 40 Page 5.11
Oblique pattern globe valves PN 25 Page 5.19

OV
DN
25
PN 25
Strainers PN 25 Page 5.34
Airvent PN 25 Page 5.19
Fill and drain ball valves Page 6.126
OV
Fill and drain cocks PN 16 heavy pattern- DIN 3848 Page 6.127
OV
2017 7.11
Potable water technology "Aquanova-System" Content
Page
8.a System summary

Content 8.05
8.b "Aquastrom F"/"Aquastrom KFR" valves

Content 8.09
"Aquastrom F" Free-flow valves (both ports female thread) 8.10
OV ..
DN QC
"Aquastrom F" Free-flow valves (solder connection/collar nut) 8.11

"Aquastrom F" Free-flow valves (both ports male thread) 8.12
"Aquastrom F" Free-flow valves (female thread/male thread) 8.13
"Aquastrom KFR" Valves (both ports female thread) 8.14
"Aquastrom KFR" Valves (both ports collar nut) 8.15
"Aquastrom KFR" Valves (both ports male thread) 8.16
"Aquastrom KFR" Valves (female thread/male thread) 8.17
8
"Aquastrom F" Free-flow valves (both ports flanged) 8.19
"Aquastrom KFR" Valves (both ports flanged) 8.19
Accessories 8.20
8.c "Aquastrom FR" and "Aquastrom R" valves

Content 8.21
"Aquastrom FR" Free-flow valves 8.22
"Aquastrom R" Non-return check valves 8.22
8.d "Optibal TW" Ball valves for potable water

Content 8.23
"Optibal TW" Ball valves for potable water 8.24
8.e "Aquastrom VT/T plus" Thermal circulation valves

Content 8.27
"Aquastrom VT" 8.28
"Aquastrom T plus" 8.29
Accessories for "Aquastrom T plus", "Aquastrom VT" 8.30
8.f "Aquastrom C" Regulating valves, "Aquastrom P" Water sampling valves
Content 8.31
"Aquastrom C" Double regulating and commissioning valves 8.32
"Aquastrom P" Water sampling valves 8.33
"Aquastrom M" Measuring and draining device 8.33
Accessories 8.33
2017 8.01
Page
8.g "Aquastrom UP" Flush-mounted valves

Content 8.35
"Aquastrom UP-F" Flush-mounted free-flow valves 8.36
"Aquastrom UP-KFR" Flush-mounted KFR valves 8.38
"Aquastrom UP-Therm" Flush-mounted circulation valves 8.39
"Aquastrom UP-MS" Water meter installation set 8.41
Accessories for "Aquastrom" flush mounted valves 8.42
Accessories for "Aquastrom UP" flush-mounted valves 8.43
with flush-mounting pipe
without flush-mounting pipe
General accessories 8.44
8.h "Aquastrom K" Thermostatic cold water circulation valve

Content 8.45
"Aquastrom K" 8.46
8
Accessories 8.46
8.i "Brawa-Mix" Thermostatic mixing valves

Content 8.47
"Brawa-Mix" 8.48
Accessories 8.49
Strainers 8.49
8.j "Regucirc" Circulation stations

Content 8.51
"Regucirc B" 8.52
"Regucirc M" 8.53
8.k "Regudrain" Flushing station

Content 8.55
"Regudrain" Flushing station 8.56
Accessories 8.56
8.l "Aquamodul" Distributor system for potable water

OV
Content 8.59
DN25 /15
T-distributor 8.61
Extension 8.61
Elbow 8.61
"Aquanova Compact" Water filter 8.62
EAS - One pipe connection piece 8.62
Pressure relief cap 8.62
Bypass valve 8.62
8.02 2017
Page
Fill and drain ball valve 8.63

Draining ball valve 8.63
"Optiflex" Fill and drain ball valve 8.63
Bracket 8.63
Accessories 8.64
8.m "Ofix" Connection fittings

Content 8.65
"Ofix" Connection fittings 8.66
8.n Domestic water station/Heating system filling station

Content 8.67
Domestic water station 8.68
8.o "Aquanova" Water filters

8
Content 8.69
"Aquanova Compact" Water filters 8.70
Accessories 8.70
"Aquanova Magnum" Water filters 8.71
Accessories 8.72
8.p Valves for water softening

Content 8.73
Bypass isolating valve 8.74
Accessories for bypass isolating valve and 8.74
bypass mixing valve DN 25
Bypass mixing valve DN 25 8.75
Spare parts 8.75
Spare parts 8.76
8.q Connection system

Content 8.77
Connection of pipes and Oventrop valves with different connections in potable water installations 8.78
8.r Stations for hot potable water preparation/Other products for water installations
Content 8.79
"Regumaq" Stations for hot potable water preparation 8.80
2017 8.03
Potable water technology "Aquanova-System" 8.a System summary
Page
8.a System summary

Content
2017 8.05
Potable water technology "Aquanova-System" 8.a System summary
Aquanova System Advantages:

The quality of potable water, the most important product for our the system interfaces (heat generation and hot potable water
nutrition, is inuenced by the potable water installation to a large preparation)reectthecompetenceofOventropassystemprovider
extent. forpotablewaterandheatinginstallationsandisthereforerelevant
Theinstallationservesaspackagingfeedingthepotablewaterfrom toyourdesignwork
thehouseconnectiontotheindividualdrawoffpointshygienically Oventropisanexpertpartnertothespecialisttradeandsupports
safe,tforhumanconsumptionandinaccordancewiththeGerman its partners during the design of potable water and heating
DecreeforPotableWater(TrinkwV).Thepotablewaterqualitymust installations
notbeimpairedbyoperationalconditionsortheusedmaterials.
The Aquanova System includes systems, products, software and Oventropoffersinstrumentsandinformationaswellascertied
otherusefulservicesrelatingtopotablewater. training courses and seminars to the specifying engineer and
qualiedinstaller
PWC
PWH
PWC
Filter
Flow sensor
8.06 2017
8.a System summary
Potable water technology "Aquanova-System" System illustrations
System illustration: Valves for circulation pipes with thermal disinfection
Potable
water
circulation
Potable
water cold
Expansion
valve
Heating
system Fine filter
Compressor
Liquefier Evaporator
Cold water
Heat pump storage cylinder
System illustration: Hydronic balancing in cold water circulation systems with valve Aquastrom K
2017 8.07
8.a System summary
Potable water technology "Aquanova-System" System illustrations
Hot
water
8
Circulation
Cold
water
Systemillustration:Regudrainushingstationforthemaintenanceofnormaloperationinpotablewatersystems,forinstanceduring
interruptionsofuse.
8.08 2017
Potable water technology "Aquanova-System" 8.b "Aquastrom F"/"Aquastrom KFR" valves
Page

Content
"Aquastrom F" Free-flow valves (both ports female thread) 8.10
OV ..
DN QC
"Aquastrom F" Free-flow valves (solder connection/collar nut) 8.11

"Aquastrom F" Free-flow valves (female thread/male thread) 8.13
"Aquastrom KFR" Valves (both ports female thread) 8.14
"Aquastrom KFR" Valves (both ports collar nut) 8.15
"Aquastrom KFR" Valves (female thread/male thread) 8.17
"Aquastrom F" Free-flow valves (both ports flanged) 8.19
"Aquastrom KFR" Valves (both ports flanged) 8.19
Accessories 8.20 8
2017 8.09
Potable water technology "Aquanova-System" "Aquastrom F" Free-flow valves (both ports female thread)
Packing
unit
"Aquastrom F" Free-flow valves (both ports female thread) Application:

bronze Potable water installations PN 16,
max. water temperature 120 C.
both ports female thread according to EN 10226-1
without draining orifices DVGW, SVGW, KIWA certified (PN 10).
DN 15 Rp x Rp (10) 4200804 Sound absorbing according to DIN EN ISO

OV ..
DN QC
DN 20 Rp x Rp (10) 4200806 3822 product group I.

DN 25 Rp 1 x Rp 1 (10) 4200808
DN 32 Rp 1 x Rp 1 (5) 4200810 All components in contact with potable water
DN 40 Rp 1 x Rp 1 (5) 4200812 are made of non-brass materials, small
DN 50 Rp 2 x Rp 2 (5) 4200816 dimensions, non-rising stem on size DN 25 and
above.
Construction according to DIN 3502.
draining orifices G closed with plugs Draining facility within same plane as handle,
therefore allowing pipes to be at close centres.
DN 15 Rp x Rp (10) 4201004 Draining ball valve (see accessories) can be
DN 20 Rp x Rp (10) 4201006 installed subsequently.
DN 25 Rp 1 x Rp 1 (10) 4201008
DN 32 Rp 1 x Rp 1 (5) 4201010 Press connection:
DN 40 Rp 1 x Rp 1 (5) 4201012 For direct connection of copper pipes
DN 50 Rp 2 x Rp 2 (5) 4201016 according to DIN EN 1057 / DVGW GW
8 392, stainless steel pipes according to DIN EN
both ports female thread according to EN 10226-1 10088 / DVGW GW 541.
with draining ball valve G Pressing must be carried out to tighten the
connection. Only use press jaws with the
DN 15 Rp x Rp (10) 4201204 original contours SANHA (SA), Geberit-
OV ..
DN QC
DN 20 Rp x Rp (10) 4201206 Mapress (MM) or Viega (Profipress) in

DN 25 Rp 1 x Rp 1 (10) 4201208 corresponding size.
DN 32 Rp 1 x Rp 1 (5) 4201210 Processing must be carried out according to
DN 40 Rp 1 x Rp 1 (5) 4201212 the installation instructions.
DN 50 Rp 2 x Rp 2 (5) 4201216
Award:
both ports bronze press fittings system Sanha
with draining ball valve G

15 mm (10) 4201252
18 mm (10) 4201253
22 mm (10) 4201254
28 mm (10) 4201255
35 mm (5) 4201256
42 mm (5) 4201257
54 mm (5) 4201258

Connection fittings: Pages 8.66, 6.109
8.10 2017
Potable water technology "Aquanova- 8.b "Aquastrom F"/"Aquastrom KFR" valves
System" "Aquastrom F" Free-flow valves (solder connection/collar nut)
Packing
unit
"Aquastrom F" Free-flow valves (solder connection/collar nut) Application:

for the connection of copper pipes according to DIN EN 1057 max. water temperature 120 C.
Inlet port: solder connection
Outlet port: male thread according to DIN ISO 228 with ring gasket, DVGW, KIWA certified (PN 10).
collar nut and solder tailpipe (bronze)
with draining ball valve G Sound absorbing according to DIN EN ISO
3822 product group I.
DN 15 15 x 15 (10) 4204252
DN 15 18 x 18 (10) 4204253 All components in contact with potable water
DN 20 22 x 22 (10) 4204254 are made of non-brass materials, small
DN 25 28 x 28 (10) 4204255 dimensions, non-rising stem on size DN 25 and
OV ..
DN QC
DN 32 35 x 35 (5) 4204256 above.

DN 40 42 x 42 (5) 4204257 Construction according to DIN 3502.
DN 50 54 x 54 (5) 4204258
Draining facility within same plane as handle,
Inlet port: solder connection Draining ball valve (see accessories) can be
Outlet port: male thread according to DIN ISO 228 with ring gasket, installed subsequently.
collar nut and solder tailpipe (bronze)
draining orifices G closed with plugs The bonnet has to be removed before
OV ..
DN QC
soldering.
DN 15 15 x 15 (10) 4203852
DN 15 18 x 18 (10) 4203853 Award:
8
DN 20 22 x 22 (10) 4203854
DN 25 28 x 28 (10) 4203855
DN 32 35 x 35 (5) 4203856 For further information see
DN 40 42 x 42 (5) 4203857 "Technical information":
DN 50 54 x 54 (5) 4203858
both ports male thread according to DIN ISO 228

with ring gaskets, collar nuts and solder tailpipes (bronze)
OV ..
DN QC
DN 15 15 x 15 (10) 4202252
DN 15 18 x 18 (10) 4202253
DN 20 22 x 22 (10) 4202254
DN 25 28 x 28 (10) 4202255
DN 32 35 x 35 (5) 4202256
DN 40 42 x 42 (5) 4202257
DN 50 54 x 54 (5) 4202258

with ring gaskets, collar nuts and solder tailpipes (bronze)
draining orifices G closed with plugs
DN 15 15 x 15 (10) 4201852
DN 15 18 x 18 (10) 4201853
DN 20 22 x 22 (10) 4201854
DN 25 28 x 28 (5) 4201855
DN 32 35 x 35 (5) 4201856
DN 40 42 x 42 (5) 4201857
DN 50 54 x 54 (5) 4201858

2017 8.11
Potable water technology "Aquanova-System" "Aquastrom F" Free-flow valves (both ports male thread)
Packing
unit
"Aquastrom F" Free-flow valves (both ports male thread) Application:

both ports flat sealing male thread
according to DIN ISO 228 DVGW, SVGW and KIWA certified (PN 10).
Sound absorbing according to DIN EN ISO
DN 15 G xG (10) 4202204 3822 product group I.
OV
DN QC
..
DN 20 G1 xG1 (10) 4202206

DN 25 G 1 x G 1 (10) 4202208 All components in contact with potable water
DN 32 G 1 x G 1 (5) 4202210 are made of non-brass materials, small
DN 40 G 1 x G 1 (5) 4202212 dimensions, non-rising stem on size DN 25 and
DN 50 G 2 x G 2 (5) 4202216 above.
Construction according to DIN 3502.
both ports flat sealing male thread Draining facility within same plane as handle,
according to DIN ISO 228 therefore allowing pipes to be at close centres.
draining orifices G closed with plugs Draining ball valve (see accessories) can be
installed subsequently.
DN 15 G xG (10) 4201804
DN 20 G1 xG1 (10) 4201806
DN 25 G 1 x G 1 (10) 4201808 Award:
DN 32 G 1 x G 1 (5) 4201810 Design Award Switzerland
8 DN 40 G 1 x G 1 (5) 4201812
DN 50 G 2 x G 2 (5) 4201816
For further information
see "Technical Information":
both ports enlarged, flat sealing male thread
according to DIN ISO 228
for the connection of thick walled plastic pipes
OV ..
DN QC
DN 15 G1 xG1 (10) 4202663

DN 20 G 1 x G 1 (10) 4202664
DN 25 G 1 x G 1 (10) 4202665
DN 32 G2 xG2 (5) 4202666
DN 40 G 2 x G 2 (5) 4202667
DN 50 G 2 x G 2 (5) 4202668

OV ..
DN QC
DN 15 G1 xG1 (10) 4202463

DN 15 G 1 x G 1 (10) 4202464
DN 25 G 1 x G 1 (10) 4202465
DN 32 G2 xG2 (5) 4202466
DN 40 G 2 x G 2 (5) 4202467
DN 50 G 2 x G 2 (5) 4202468

8.12 2017
System" "Aquastrom F" Free-flow valves (female thread/male thread)
Packing
unit
"Aquastrom F" Free-flow valves (female thread/male thread) Application:

Inlet port: female thread according to EN 10226-1
Outlet port: male thread according to DIN ISO 228 with ring gasket, DVGW and SVGW certified (PN 10).
collar nut and threaded tailpipe (bronze)
with draining ball valve G Sound absorbing according to DIN EN ISO
3822 product group I.
OV ..
DN QC
DN 15 Rp xR (10) 4203304 All components in contact with potable water

DN 20 Rp xR (10) 4203306 are made of non-brass materials, small
DN 25 Rp 1 xR1 (10) 4203308 dimensions, non-rising stem on size DN 25 and
DN 32 Rp 1 x R 1 (5) 4203310 above.
DN 40 Rp 1 x R 1 (5) 4203312 Construction according to DIN 3502.
DN 50 Rp 2 xR2 (5) 4203316
Draining facility within same plane as handle,
Inlet port: female thread according to EN 10226-1 Draining ball valve (see accessories) can be
Outlet port: male thread according to DIN ISO 228 with ring gasket, installed subsequently.
draining orifices G closed with plugs Award:
OV ..
DN QC
DN 15 Rp xR (10) 4202904
DN 20 Rp xR (10) 4202906
8
DN 25 Rp 1 xR1 (10) 4202908
DN 32 Rp 1 x R 1 (5) 4202910
DN 40 Rp 1 x R 1 (5) 4202912
DN 50 Rp 2 xR2 (5) 4202916

Outlet port: male thread according to DIN ISO 228
OV ..
DN QC
DN 15 Rp xG (10) 4203204
DN 20 Rp xG1 (10) 4203206
DN 25 Rp 1 x G 1 (10) 4203208
DN 32 Rp 1 x G 1 (5) 4203210
DN 40 Rp 1 x G 1 (5) 4203212
DN 50 Rp 2 x G 2 (5) 4203216

Outlet port: male thread ccording to DIN ISO 228
DN 15 Rp xG (10) 4202804
OV ..
DN QC
DN 20 Rp xG1 (10) 4202806

DN 25 Rp 1 x G 1 (10) 4202808
DN 32 Rp 1 x G 1 (5) 4202810
DN 40 Rp 1 x G 1 (5) 4202812
DN 50 Rp 2 x G 2 (5) 4202816

2017 8.13
Potable water technology "Aquanova-System" "Aquastrom KFR" Valves (both ports female thread)
Packing
unit
"Aquastrom KFR" Valves (both ports female thread) Application:

Combination free-flow valve and Potable water installations PN 16,
non-return check valve max. water temperature 120 C.
bronze
DVGW certified (PN 10).
construction according to DIN 3502 Sound absorbing according to DIN EN ISO
with draining ball valve G 3822 product group I.
for the universal connection of pipes and fittings
All components in contact with potable water
OV ..
DN QC
DN 15 Rp x Rp (10) 4206204 are made of non-brass materials, small

DN 20 Rp x Rp (10) 4206206 dimensions, non-rising stem on size DN 25 and
DN 25 Rp 1 x Rp 1 (10) 4206208 above. Draining and test orifice on the side of
DN 32 Rp 1 x Rp 1 (5) 4206210 the handwheel.
DN 40 Rp 1 x Rp 1 (5) 4206212 The valves without draining facility have a
DN 50 Rp 2 x Rp 2 (5) 4206216 plugged draining orifice G .
Drain ball valve (see accessories) may be
both ports female thread according to DIN EN 10226-1
construction according to DIN 3502 Award:
OV ..
DN QC
8 DN 15 Rp x Rp (10) 4205804
DN 20 Rp x Rp (10) 4205806
DN 25 Rp 1 x Rp 1 (10) 4205808
DN 32 Rp 1 x Rp 1 (5) 4205810
DN 40 Rp 1 x Rp 1 (5) 4205812
DN 50 Rp 2 x Rp 2 (5) 4205816
both ports bronze press fittings System Sanha Press connection:

with draining ball valve G For the direct connection of copper pipes
15 mm (10) 4206252 stainless steel pipes according to DIN EN
18 mm (10) 4206253 10088 / DVGW GW 541.
22 mm (10) 4206254 Pressing must be carried out to tighten the
28 mm (10) 4206255 connection. Only use press jaws with the
35 mm (5) 4206256 original contours SANHA (SA), Geberit-
42 mm (5) 4206257 Mapress (MM) or Viega (Profipress) in
54 mm (5) 4206258 corresponding size.
Processing must be carried out according to
the installation instructions.

8.14 2017
System" "Aquastrom KFR" Valves (both ports collar nut)
Packing
unit
"Aquastrom KFR" Valves (both ports collar nut) Application:

non-return check-valve max. water temperature 120 C.
bronze
with ring gaskets, collar nuts and solder tailpipes (bronze) Sound absorbing according to DIN EN ISO
for the connection of copper pipes
OV ..
DN QC

DN 15 15 x 15 (10) 4208352 are made of non-brass materials, small
DN 15 18 x 18 (10) 4208353 dimensions, non-rising stem on size DN 25 and
DN 20 22 x 22 (10) 4208354 above. Draining and test orifice on the side of
DN 25 28 x 28 (10) 4208355 the handwheel.
DN 32 35 x 35 (5) 4208356 The valves without draining facility have a
DN 40 42 x 42 (5) 4208357 plugged draining orifice G .
DN 50 54 x 54 (5) 4208358 Drain ball valve (see accessories) may be
both ports male thread according to DIN ISO 228 The bonnet has to be removed before
with ring gaskets, collar nuts and solder tailpipes (bronze) soldering.
for the connection of copper pipes Award:
8
OV ..
DN QC

DN 15 15 x 15 (10) 4207952
DN 15 18 x 18 (10) 4207953
DN 20 22 x 22 (10) 4207954
DN 25 28 x 28 (10) 4207955
DN 32 35 x 35 (5) 4207956
DN 40 42 x 42 (5) 4207957
DN 50 54 x 54 (5) 4207958

2017 8.15
Potable water technology "Aquanova-System" "Aquastrom KFR" Valves (both ports male thread)
Packing
unit
"Aquastrom KFR" Valves (both ports male thread) Application:

bronze
according to DIN ISO 228 Sound absorbing according to DIN EN ISO
OV
DN QC
..
DN 15 G xG (10) 4208204 are made of non-brass materials, small

DN 20 G1 xG1 (10) 4208206 dimensions, non-rising stem on size DN 25 and
DN 25 G 1 x G 1 (10) 4208208 above. Draining and test orifice on the side of
DN 32 G 1 x G 1 (5) 4208210 the handwheel.
DN 40 G 1 x G 1 (5) 4208212 The valves without draining facility have a
DN 50 G 2 x G 2 (5) 4208216 plugged draining orifice G .
for the universal connection of pipes and fittings Award:
OV
8
DN QC
..
DN 15 G xG (10) 4207804
DN 20 G1 xG1 (10) 4207806
DN 25 G 1 x G 1 (10) 4207808
DN 32 G 1 x G 1 (5) 4207810
DN 40 G 1 x G 1 (5) 4207812
DN 50 G 2 x G 2 (5) 4207816

OV ..
DN QC
DN 15 G1 xG1 (10) 4208563

DN 20 G 1 x G 1 (10) 4208564
DN 25 G 1 x G 1 (10) 4208565
DN 32 G2 xG2 (5) 4208566
DN 40 G 2 x G 2 (5) 4208567
DN 50 G 2 x G 2 (5) 4208568

OV
DN QC
..
DN 15 G1 xG1 (10) 4208363

DN 20 G 1 x G 1 (10) 4208364
DN 25 G 1 x G 1 (10) 4208365
DN 32 G2 xG2 (5) 4208366
DN 40 G 2 x G 2 (5) 4208367
DN 50 G 2 x G 2 (5) 4208368

8.16 2017
System" "Aquastrom KFR" Valves (female thread/male thread)
Packing
unit
"Aquastrom KFR" Valves (female thread/male thread) Application:

bronze
Outlet port: male thread according to DIN ISO 228 with ring gasket, Sound absorbing according to DIN EN ISO
collar nut and threaded tailpipe (bronze) 3822 product group I.
for the universal connection of pipes and fittings All components in contact with potable water
OV ..
DN QC
are made of non-brass materials, small

DN 15 Rp xR (10) 4207304 dimensions, non-rising stem on size DN 25 and
DN 20 Rp xR (10) 4207306 above. Draining and test orifice on the side of
DN 25 Rp 1 xR1 (10) 4207308 the handwheel.
DN 32 Rp 1 x R 1 (5) 4207310 The valves without draining facility have a
DN 40 Rp 1 x R 1 (5) 4207312 plugged draining orifice G .
DN 50 Rp 2 xR2 (5) 4207316 Drain ball valve (see accessories) may be
Inlet port: female thread according to EN 10226-1 Award:

Outlet port: male thread according to DIN ISO 228 with ring gasket,
8
OV ..
DN QC
DN 15 Rp xR (10) 4206904
DN 20 Rp xR (10) 4206906
DN 25 Rp 1 xR1 (10) 4206908
DN 32 Rp 1 x R 1 (5) 4206910
DN 40 Rp 1 x R 1 (5) 4206912
DN 50 Rp 2 xR2 (5) 4206916

Outlet port: male thread, flat sealing, according to DIN ISO 228
OV
DN QC
..
DN 15 Rp xG (10) 4207204
DN 20 Rp xG1 (10) 4207206
DN 25 Rp 1 x G 1 (10) 4207208
DN 32 Rp 1 x G 1 (5) 4207210
DN 40 Rp 1 x G 1 (5) 4207212
DN 50 Rp 2 x G 2 (5) 4207216

Outlet port: male thread, flat sealing, according to DIN ISO 228
OV ..
DN QC
DN 15 Rp xG (10) 4206804
DN 20 Rp xG1 (10) 4206806
DN 25 Rp 1 x G 1 (10) 4206808
DN 32 Rp 1 x G 1 (5) 4206810
DN 40 Rp 1 x G 1 (5) 4206812
DN 50 Rp 2 x G 2 (5) 4206816

2017 8.17
"Aquastrom F" Free-flow valves (both ports male thread)
Potable water technology "Aquanova-System" "Aquastrom KFR" Valves (both ports male thread)
"Aquastrom F" Free-flow valves (both ports male thread) Application:

both ports flat sealing male thread "Aquastrom F" valves:
according to DIN ISO 228, without draining facility DVGW certified (PN 10)
for the universal connection of pipes "Aquastrom KFR" valves:
DVGW certified (PN 10)
DN 65 G3 xG3 4201820
DN 80 G 3 x G 3 4201824 Without dead zone, all components in contact
with potable water made of non-brass
materials, valve disc made of stainless steel,
both ports flat sealing male thread non-rising stem, maintenance-free stem seal
according to DIN ISO 228, with plugged draining due to double O-ring made of EPDM.
orifice G in front of and behind the seat Draining orifices on the side of the
for the universal connection of pipes handwheel. Display of the valve setting with the
help of the stroke index integrated in the
DN 65 G3 xG3 4202220 handwheel even if the valve has been
DN 80 G 3 x G 3 4202224 insulated.
"Aquastrom KFR" Valves (both ports male thread) The valves with draining orifice can
Combination free-flow valve/non-return check valve subsequently be equipped with a drain ball
bronze valve: page 8.63
8 both ports flat sealing male thread

according to DIN ISO 228, without draining facility,
for the universal connection of pipes
DN 65 G3 xG3 4207820
DN 80 G 3 x G 3 4207824

according to DIN ISO 228, with plugged draining Suitable insulation shells for the sizes DN 65
orifice G in front of and behind the seat and DN 80 can be obtained from:
for the universal connection of pipes GWK Kuhlmann GmbH, 33154 Salzkotten
or
DN 65 G3 xG3 4208220 www.gwk.de
DN 80 G 3 x G 3 4208224 Energy saving box serie MS - standard:
DN 65 male thread x male thread:
item no. 1221 065 608
DN 80 male thread x male thread:
item no. 1221 080 608
8.18 2017
Potable water technology "Aquanova- "Aquastrom F" Free-flow valves (both ports flanged)
System" "Aquastrom KFR" Valves (both ports flanged)
"Aquastrom F" Free-flow valves (both ports flanged) Application:

both ports round flanges according to DIN EN 1092, "Aquastrom F" valves:
with additional flattening to increase the static stability, DVGW and SVGW certified (PN 10)
without draining facility "Aquastrom KFR" valves:
DVGW certified (PN 10)
DN 65 2 4204351
DN 80 3 4204352 Without dead zone, all components in contact
with potable water made of non-brass
materials, valve disc made of stainless steel,
both ports round flanges according to DIN EN 1092, non-rising stem, maintenance-free stem seal
with additional flattening to increase the static stability, due to double O-ring made of EPDM.
with plugged draining orifice G Draining orifices on the side of the
in front of and behind the seat handwheel. Display of the valve setting with the
help of the stroke index integrated in the
DN 65 2 4204451 handwheel even if the valve has been
DN 80 3 4204452 insulated.
"Aquastrom KFR" Valves (both ports flanged) The valves with draining orifice can
Combination free-flow valve/non-return check valve subsequently be equipped with a drain ball
bronze valve: page 8.63
both ports round flanges according to DIN EN 1092,

For further information see 8
with additional flattening to increase the static stability,
without draining facility
DN 65 2 4209351
DN 80 3 4209352
both ports round flanges according to DIN EN 1092,

with additional flattening to increase the static stability, Suitable insulation shells for the sizes DN 65
with plugged draining orifice G and DN 80 can be obtained from:
in front of and behind the seat GWK Kuhlmann GmbH, 33154 Salzkotten
or
DN 65 2 4209451 www.gwk.de
DN 80 3 4209452 Energy saving box serie FS - standard:
DN 65 flanged x flanged:
item no. 1112 065 609
DN 80 flanged x flanged:
item no. 1112 080 609
2017 8.19
Potable water technology "Aquanova-System" Accessories
Accessories
Bonnets for valve bodies of the free-flow valves "Aquastrom F" and
the valves "Aquastrom KFR" as well as for replacement purposes for
products of other manufacturers than Oventrop with a connection
body/bonnet according to DIN 3502.
Bonnet for free-flow valves

bronze
DN 15 4209004
DN 20 4209006
DN 25 4209008
DN 32 4209010
DN 40 4209012
DN 50 4209016
DN 65 4209020
DN 80 4209024
Bonnet for "KFR" valves

bronze
DN 15 4209504
8 DN 20 4209506
DN 25 4209508
DN 32 4209510
DN 40 4209512
DN 50 4209516
DN 65 4209520
DN 80 4209524
Insulation shells made of polyurethane rigid foam Insulation shells (two-part) made of
for "Hydrocontrol VTR/VPR", "Hydrocontrol ATR/APR", polyurethane with tongue-and-groove fitting.
"Hydromat QTR", "Hydromat DTR", as well as for free-flow Meet the requirements of the German Energy
OV
DN valves "Aquastrom F" and "Aquastrom KFR" valves Saving Directive (EnEV), appendix 5, table 1,
Operating temperature ts: +130C (for short periods up to +150C) line 5.
DN 10 - DN 15 1060081 4102.
DN 20 1060082
DN 25 1060083
DN 32 1060084
DN 40 1060085
DN 50 1060086
8.20 2017
Potable water technology "Aquanova-System" 8.c "Aquastrom FR" and "Aquastrom R" valves
Page

Content
"Aquastrom FR" Free-flow valves 8.22
"Aquastrom R" Non-return check valves 8.22
2017 8.21
"Aquastrom FR" Free-flow valves
Potable water technology "Aquanova-System" "Aquastrom R" Non-return check valves
Packing
unit
"Aquastrom FR" Free-flow valves Application:

with non-return check valve insert, bronze Potable water installations PN 16,
both ports flat sealing male thread DVGW certified (PN 10).
according to DIN ISO 228,
with draining facility and integrated non-return check valve insert Especially suitable for circulation pipes due to
with low opening pressure low opening pressure Popening 10 mbar,
for the universal connection of pipes and fittings reduced dimensions, non-rising stem on size
OV
DN QC
..
DN 25 and above. The valves with draining

DN 15 G xG (10) 4202304 facility have an additional plugged draining
DN 20 G1 xG1 (10) 4202306 orifice G in front of the seat. The valves
DN 25 G 1 x G 1 (10) 4202308 without draining facility have a plugged
DN 32 G 1 x G 1 (5) 4202310 draining orifice G in front of and behind the
seat.
both ports flat sealing male thread installed subsequently.
with plugged draining orifice G
in front of and behind the seat and
integrated non-return check valve insert
OV ..
DN QC
with low opening pressure

8 DN 15 G xG (10) 4202704
DN 20 G1 xG1 (10) 4202706
DN 25 G 1 x G 1 (10) 4202708
DN 32 G 1 x G 1 (5) 4202710
Insulation shells: page 8.20
"Aquastrom R" Non-return check valves Application:

straight pattern, with test orifices G , Potable water installations PN 16,
DIN EN 13959 type EA, bronze max. water temperature 95 C,
model according to DIN EN 13959.
according to DIN ISO 228 Safety device according to DIN EN
for the universal connection of pipes and fittings 1717 up to liquid category 2.
DN 15 G xG 4208704 Especially suitable for circulation pipes due to

DN 20 G1 xG1 4208706 low opening pressure Popening 10 mbar,
DN 25 G 1 x G 1 4208708 without dead zone.
DN 32 G 1 x G 1 4208710 DVGW and SVGW certified (PN 10).
DN 40 G 1 x G 1 4208712 Sound absorbing according to DIN EN ISO
DN 50 G 2 x G 2 4208716 3822 product group I.
Inlet port: collar nut, flat sealing For further information see
Outlet port: male thread, flat sealing according to DIN ISO 228 "Technical information":
DN 15 c/nut xG 4208604
DN 20 c/nut 1 xG1 4208606
DN 25 c/nut 1 x G 1 4208608
DN 32 c/nut 1 x G 1 4208610
DN 40 c/nut 1 x G 1 4208612
DN 50 c/nut 2 x G 2 4208616
Connection fittings: page 8.66
8.22 2017
Potable water technology "Aquanova-System" 8.d "Optibal TW" Ball valves for potable water
Page

Content
"Optibal TW" Ball valves for potable water 8.24
2017 8.23
Potable water technology "Aquanova-System" "Optibal TW" Ball valves for potable water
Packing
unit
"Optibal TW" Ball valves for potable water Application:

with full flow, bronze Potable water installations PN 10,
extended plastic handle (black/green) max. water temperature 90 C.
extended plastic handle (black/green) DN 15 - DN 80 DVGW and VA certified.

both ports female thread according to EN 10226-1,
with plugged draining orifice G on both sides
Bronze body, ball made of chrome plated
brass, without dead zone, ball always
DN 15 Rp x Rp (10) 4208804 surrounded by water.
DN 20 Rp x Rp (10) 4208806 Full flow according to DIN EN 13828.
DN 25 Rp 1 x Rp 1 (10) 4208808
DN 32 Rp 1 x Rp 1 (10) 4208810 Sound absorbing according to DIN EN ISO
DN 40 Rp 1 x Rp 1 (5) 4208812 3822 product group I.
DN 50 Rp 2 x Rp 2 (5) 4208816
lever made of galvanised steel, without draining orifice
DN 65 Rp 2 x Rp 2 4208820
DN 80 Rp 3 x Rp 3 4208824
extended plastic handle (black/green)

8 both ports flat sealing male thread
with plugged draining orifice G on both sides
DN 15 G xG (10) 4208904
DN 20 G1 xG1 (10) 4208906
DN 25 G 1 x G 1 (10) 4208908
DN 32 G 1 x G 1 (10) 4208910
DN 40 G 1 x G 1 (5) 4208912
DN 50 G 2 x G 2 (5) 4208916
both ports bronze press fittings system Sanha Press connection:

with plugged draining orifice G on both sides For the direct connection of copper pipes
15 mm (10) 4208852 10088 / DVGW GW 451.
18 mm (10) 4208853 Pressing must be carried out to tighten the
22 mm (10) 4208854 connection. Only use press jaws with the
28 mm (10) 4208855 original contours SANHA (SA), Geberit-
35 mm (10) 4208856 Mapress (MM) or Viega (Profipress) n
42 mm (5) 4208857 corresponding size. Processing must be
54 mm (5) 4208858 carried out according to the installation
instructions.
Electromotive actuator Electromotive actuator for the motorisation of

24 V AC/DC, with spring return "Optibal TW" ball valves DN 15 - DN 25.
for "Optibal TW" DN 15 - DN 25 (10) 4208890 Depending on the position of the ball valve
stem, the actuator can be installed closed with
current "off" or open with current "off". Torque
4 Nm, angle of rotation 90 within 30 seconds.
8.24 2017
Potable water technology "Aquanova-System" Insulation shells
Packing
unit
Insulation shells The insulation shells comply with the German

Energy Saving Directive as well as the building
DN 15 15 mm, 18 mm (50) 4208881 material class B1 according to DIN 4102 as far
DN 20 22 mm (25) 4208882 as fire protection is concerned.
DN 25 28 mm (25) 4208883
DN 32 35 mm (25) 4208884 For further information see
DN 40 42 mm (10) 4208885 "Technical information":
DN 50 54 mm (10) 4208886
for item no. (10) 1078382

1078171/ 72/ 73, 1078371/ 72/ 73,
1078708/ 10/ 61/ 62 and
4208806/ 08, 4208854/ 55, 4208906/ 08
for item no.: (10) 4208893
4208810/ 12/ 16/ 56/ 57/ 58,
4208910/ 12/ 16
2017 8.25
Potable water technology "Aquanova-System" 8.e "Aquastrom VT/T plus" Thermal circulation valves
Page

Content
"Aquastrom VT" 8.28
"Aquastrom T plus" 8.29
Accessories for "Aquastrom T plus", "Aquastrom VT" 8.30
2017 8.27
Potable water technology "Aquanova-System" "Aquastrom VT"
"Aquastrom VT" Application:

Thermostatic valve with adjustable temperature Potable water installations PN 16 for circulation
control range and adjustable residual volume flow pipes according to work sheets W551 and
for circulation pipes W553.
bronze With the factory setting, the valve complies
with DVGW W554.
with isolating facility, presettable, draining valve for DVGW, SVGW, KIWA, VA, WRAS and
hose connection in front of the thermal control unit, WaterMark certified.
including insulation and thermometer Max. water temperature 90 C.
Complete with insulation shells made of EPS
both ports female thread according to EN 10226-1 according to the German Energy Saving
Directive (EnEV), building material class B1
DN 15 Rp x Rp 4205704 according to DIN 4102.
DN 20 Rp x Rp 4205706 Thermal control:
Max. control range: 50 C65 C
Recommended control range: 55 C60 C
Preset to 57 C.
Temperature and flow setting lockable. With
integrated ball valve, with isolating facility for
both ports flat sealing male thread according to DIN ISO 228 riser. Automatic thermal disinfection.
Disinfection range starts about 6 K above the
DN 15 G xG 4206704 set temperature. The disinfection volume flow
DN 20 G1 xG1 4206706 returns to the residual volume flow
8 approximately 12 K above the set temperature
to guarantee the supply of the succeeding
system during thermal disinfection.
Draining valve for hose connection.
both ports bronze press fittings Temperature monitoring via thermometer or
temperature sensor.
15 mm 4205752 Self-cleaning valve unit.
18 mm 4205753 The thermal control function is maintained even
22 mm 4205754 if the residual volume flow is set very low. This
way, an exact hydronic balance of the
individual circuits according to the pipework
calculation is possible.
All parts in contact with potable water are
made of non-brass materials.
Press connection:
For direct connection of copper pipes
according to DIN EN 1057 / DVGW GW
392, stainless steel pipes according to DIN EN
10088 / DVGW GW 541.
Pressing must be carried out to tighten the
original contours SANHA (SA), Geberit-
Mapress (MM) or Viega (Profipress) in
carried out according to the installations
instructions.
Award:
Design Centre Essen

Design Award of the
Nominated 2010

8.28 2017
Potable water technology "Aquanova-System" "Aquastrom T plus"
"Aquastrom T plus" Application:

Thermostatic valve with adjustable temperature Potable water installations PN 16 for circulation
control range and fixed residual volume flow for pipes according to work sheets W551 and
circulation pipes W553.
bronze
Valve complies with DVGW W554.
with isolating facility, presettable, draining valve for DVGW, KIWA, SVGW, WRAS, ACS and VA
hose connection in front of the thermal control unit, certified.
including insulation and thermometer
Max. water temperature 90 C.
both ports female thread according to EN 10226-1 Thermal control:
Recommended control range: 55 C-60 C
DN 15 Rp x Rp 4205504 Preset to 57 C
DN 20 Rp x Rp 4205506 (max. control range 40 C-65 C).
DN 25 Rp 1 x Rp 1 4205508 Temperature setting can be protected against
unauthorised tampering.
Automatic thermal disinfection.
Disinfection range starts about 6 K above the
set temperature. When exceeding a
both ports flat sealing male thread according to DIN ISO 228 temperature of 73 C, the disinfection volume
flow is - irrespective of the set temperature -
DN 15 G xG 4206504 reduced to the residual volume flow to
DN 20 G1 xG1 4206506 guarantee the disinfection of the succeeding
DN 25 G 1 x G 1 4206508 system. Draining valve for hose connection. 8
Temperature monitoring via thermometer or
temperature sensor.
Presetting and isolation of the max. volume
both ports bronze press fittings flow irrespective of the set control temperature.
All parts in contact with potable water are
15 mm 4205552 made of non-brass materials.
18 mm 4205553 Complete with insulation shells made
22 mm 4205554 of EPS according to the German Energy Saving
28 mm 4205555 Directive (EnEV), building material class B1
according to DIN 4102.
with isolating facility, presettable, Press connection:

but without draining valve for hose connection For direct connection of copper pipes
in front of the thermal control unit, according to DIN EN 1057 / DVGW GW
without thermometer and without insulation 392, stainless steel pipes according to DIN EN
The draining valve with hose connection is 10088 / DVGW GW 541.
required for the installation of the thermometer. Pressing must be carried out to tighten the
Draining orifice G in front of the thermal control original contours SANHA (SA), Geberit-
unit closed with a plug. Mapress (MM) or Viega (Profipress) in
both ports female thread according to EN 10226-1 carried out according to the installations
instructions.
DN 15 Rp x Rp 4205604
DN 20 Rp x Rp 4205606 For further information see
DN 25 Rp 1 x Rp 1 4205608 "Technical information":
both ports male thread according to DIN ISO 228, flat sealing
DN 15 G xG 4206604
DN 20 G1 xG1 4206606
DN 25 G 1 x G 1 4206608
as above, but without isolating facility Only for export.

and not presettable
DN 15 Rp x Rp 4205404
DN 20 Rp x Rp 4205406
2017 8.29
Potable water technology "Aquanova-System" Accessories for "Aquastrom T plus", "Aquastrom VT"
Packing
unit
Accessories for "Aquastrom T plus", "Aquastrom VT"
Locking pin with locking wire For locking the set nominal values.
For double regulating and commissioning
for double regulating and (50) 1061792 valves "Hycocon VTZ/VPZ" as well as item no.
commissioning valves 42055/56/65/66..
"Hycocon VTZ/VPZ"
as well as for "Aquastrom T plus"
Insulation shell
DN 15 + DN 20 4205581 For item no. 42055/56/65/66..

DN 25 4205583
DN 15 + DN 20 4205781 For item no. 42057/67..
Thermometer (bimetal) The draining valve with hose connection,

item no. 4205593, is required for
NG 50 4205591 installation.
8
Draining valve for hose (10) 4205593 For hoses .
connection G
"Sensor LW TQ"
Sensor element PT 1000 (10) 4205592 For remote monitoring and connection to
centralised building control systems.
8.30 2017
Potable water technology "Aquanova- 8.f "Aquastrom C" Regulating valves, "Aquastrom P" Water
System" sampling valves
Page
Content
"Aquastrom C" Double regulating and commissioning valves 8.32
"Aquastrom P" Water sampling valves 8.33
"Aquastrom M" Measuring and draining device 8.33
Accessories 8.33
2017 8.31
Potable water technology 8.f "Aquastrom C" Regulating valves, "Aquastrom P" Water sampling valves
"Aquanova-System" "Aquastrom C" Double regulating and commissioning valves
Packing
unit
"Aquastrom C" Double regulating and commissioning valves Application:

with thermometer, draining valve for hose Potable water installations PN 16 for circulation
connection G and insulation pipes according to DVGW work sheets W551
for circulation pipes in potable water installations and W553.
bronze DVGW, SVGW, KIWA, ACS, VA and WaterMark
certified.
both ports female thread according to EN 10226-1 Max. water temperature 90 C.
Temperature monitoring via thermometer.
DN 15 Rp x Rp 4208104 Draining valve for hose connection.
DN 20 Rp x Rp 4208106
DN 25 Rp 1 x Rp 1 4208108 Description:
OV
DN 32 Rp 1 x Rp 1 4208110 Body, bonnet and draining valve made of

bronze, stem and valve disc made of brass
resistant to dezincification (DZR), disc with
PTFE seal, plug made of brass resistant to
both ports female thread according to EN 10226-1 dezincification (DZR);
but without insulation, without draining valve for hose connection complete with insulation shells made
and without thermometer of EPS according to the German Energy Saving
Directive (EnEV), building material class B1
DN 15 Rp x Rp (10) 4208152
DN 20 Rp x Rp (10) 4208154
DN 25 Rp 1 x Rp 1 (10) 4208156
Function:
DN 32 Rp 1 x Rp 1 (5) 4208158
8 both ports male thread according to DIN ISO 228
valves "Aquastrom C" are installed in the
circulation pipes of potable water installations
and serve to achieve a hydronic balance
DN 15 G xG 4207104 between the various circuits of the system.
DN 20 G1 xG1 4207106 The Oventrop double regulating and
4207108
OV
DN 25 G 1 x G 1 commissioning valves have threaded ports for

DN 32 G 1 x G 1 4207110 fill and drain ball valves.
as above but additionally with flame resistant For further information see
water sampling valve (bronze/stainless steel) "Technical information":
for tests according to DVGW 551 and TrinkwV
(German Decree for Potable Water)
DN 15 Rp x Rp 4208504
DN 20 Rp x Rp 4208506
DN 25 Rp 1 x Rp 1 4208508 The double regulating and commissioning
DN 32 Rp 1 x Rp 1 4208510 valves "Aquastrom C" are protected by patent.
Further double regulating and commissioning
both ports male thread according to DIN ISO 228 valves: page 3.26
DN 15 G xG 4207504 Colour rings for marking the risers: page 8.33

DN 20 G1 xG1 4207506
DN 25 G 1 x G 1 4207508
DN 32 G 1 x G 1 4207510
Replacement insulation shell for Aquastrom C

with recess for water sampling valve Aquastrom P
DN 15 + DN 20 4208181
DN 25 4208182
DN 32 4208183
Bonnet for Aquastrom C
DN 15 4208192
DN 20 4208193
DN 25 4208194
DN 32 4208195
Bronze pressure test points Set = 2 pressure test points G
"classic" measuring technique (50) 4209090
8.32 2017
"Aquastrom P" Water sampling valves
Potable water technology "Aquastrom M" Measuring and draining device
"Aquanova-System" Accessories
Packing
unit
"Aquastrom P" Water sampling valves Flame resistant and chemically disinfectable
bronze/stainless steel water sampling valve for microbiologic-
chemical tests according to TrinkwV (German
DN 8 G (10) 4209102 Decree for Potable Water).
DN 10 G (10) 4209103 PN 10.
Models 4209102/03:
Valve body made of bronze, stem made of
stainless steel, metal to metal sealing, with
additional seal made of heat-resistant PTFE,
with metal plate for marking the water sampling
point according to DIN EN ISO 19458.
chrome plated, for the connection to an angle pattern valve Model 4209202:
Valve body made of dezincification resistant
Inlet port: Pipe 10 x 1.25 brass according to DIN 50930-6, chrome
Outlet port: G male thread with tapered crimp fitting with plated, stem made of stainless steel, metal to
length compensation metal sealing, with additional seal made of
heat-resistant PTFE.
4209202
All models are flame resistant, with discharge
elbows made of stainless steel.
Operation with the help of the 5 mm Allen key
supplied with the valve. Body and discharge 8
elbow can be turned by 360.
All models are DVGW certfied.
"Aquastrom M" Measuring and draining device For potable water temperature control in cold
both ports male thread according to DIN ISO 228 and hot water supply pipes and for the
bronze, with hole for lead seal installation of water sampling valves.
DN 15 G xG 4209204 The device without dead zone features a G

DN 20 G1 x G1 4209206 and a G outlet nipple.
DN 25 G 1 x G 1 4209208
DN 32 G 1 x G 1 4209210 When used in combination with the PT 1000
temperature sensor 1150090 (page 8.56),
Accessories electronic monitoring of the potable water
for double regulating and commissioning valves "Aquastrom C" temperature is possible in a centralised
building control system.
Locking set (1 fold) (25) 1060180 Consisting of locking cap, lead seal and
locking wire.
Marking ring Colour rings for marking the risers to be

clipped onto the handwheel.
blue (50) 1069650
red (50) 1069651
violet (50) 1069652
green (50) 1069653
2017 8.33
Potable water technology "Aquanova-System" 8.g "Aquastrom UP" Flush-mounted valves
Page

Content
"Aquastrom UP-F" Flush-mounted free-flow valves 8.36
"Aquastrom UP-KFR" Flush-mounted KFR valves 8.38
"Aquastrom UP-Therm" Flush-mounted circulation valves 8.39
"Aquastrom UP-MS" Water meter installation set 8.41
Accessories for "Aquastrom" flush mounted valves 8.42
General accessories 8.44
2017 8.35
Potable water technology "Aquanova-System" "Aquastrom UP-F" Flush-mounted free-flow valves
"Aquastrom UP-F" Flush-mounted free-flow valves Application:

PN 16, bronze Potable water installations PN 16,
both ports female thread according to EN 10226-1 Sound absorbing according to DIN EN ISO
for the universal connection of pipes 3822 product group I.
in intermediate ceiling installations
DVGW certified (DN 15, DN 20) (PN 10).
DN 15 Rp x Rp 4220004
DN 20 Rp x Rp 4220006 Without dead zone, non-rising stem,
maintenance-free stem seal due to double
O-ring made of EPDM, complete with
insulation shell made of EPS according to the
German Energy Saving Directive (EnEV),
building material class B1 according to DIN
4102.
both ports bronze press fittings Press connection:

for the universal connection of pipes For the direct connection of copper pipes
in intermediate ceiling installations according to DIN EN 1057 / DVGW GW 392,
DN 15 15 mm 4220052 10088 / DVGW GW 541.
DN 15 18 mm 4220053 Pressing must be carried out to tighten the
8 DN 20 22 mm 4220054 connection. Only use press jaws with the
instructions.


for flush-mounting or front-wall installation,
with flush-mounting pipe and protection/operating cap
DN 15 Rp x Rp 4220104
DN 20 Rp x Rp 4220106
DN 25 Rp 1 x Rp 1 4220108
DN 32 Rp 1 x Rp 1 4220110
both ports bronze press fittings

DN 15 15 mm 4220152
DN 15 18 mm 4220153
DN 20 22 mm 4220154
DN 25 28 mm 4220155
8.36 2017
Potable water technology "Aquanova-System" "Aquastrom UP-F" Flush-mounted free-flow valves
"Aquastrom UP-F" Flush-mounted free-flow valves Application:

PN 16, bronze Potable water installations PN 16,
both ports female thread according to EN 10226-1 Sound absorbing according to DIN EN ISO
for the universal connection of pipes 3822 product group I.
for flush-mounting installation,
with chrome plated handle bonnet DVGW certified (DN 15, DN 20) (PN 10).
DN 15 Rp x Rp 4220204 Without dead zone, non-rising stem,

DN 20 Rp x Rp 4220206 maintenance-free stem seal due to double
DN 25 Rp 1 x Rp 1 4220208 O-ring made of EPDM, complete with
DN 32 Rp 1 x Rp 1 4220210 insulation shell made of EPS according to the
building material class B1 according to DIN
4102.

for flush-mounting installation, according to DIN EN 1057 / DVGW GW 392,
with chrome plated handle bonnet stainless steel pipes according to DIN EN
DN 15 15 mm 4220252
10088 / DVGW GW 541. 8
DN 15 18 mm 4220253 connection. Only use press jaws with the
DN 20 22 mm 4220254 original contours SANHA (SA), Geberit-
instructions.

Lockshield configuration
with chrome plated protective cover
and 6 mm socket spanner for operation
DN 15 Rp x Rp 4220304
DN 20 Rp x Rp 4220306
DN 25 Rp 1 x Rp 1 4220308
DN 32 Rp 1 x Rp 1 4220310
Lockshield configuration
with chrome plated protective cover
and 6 mm socket spanner for operation
DN 15 15 mm 4220352
DN 15 18 mm 4220353
DN 20 22 mm 4220354
2017 8.37
Potable water technology "Aquanova-System" "Aquastrom UP-KFR" Flush-mounted KFR valves
"Aquastrom UP-KFR" Flush-mounted KFR valves Application:

Combination free-flow valve and non-return check valve Potable water installations PN 16,
PN 16, bronze max. water temperature 90 C.
Sound absorbing according to DIN EN ISO
both ports female thread according to EN 10226-1 3822 product group I.
in intermediate ceiling installations Without dead zone, non-rising stem,
maintenance-free stem seal due to double
DN 15 Rp x Rp 4221004 O-ring made of EPDM, complete with
DN 20 Rp x Rp 4221006 insulation shell made of EPS according to the
building material class B1 according to
DIN 4102.

in intermediate ceiling installations according to DIN EN 1057 / DVGW GW 392,
DN 15 15 mm 4221052 10088 / DVGW GW 541.
8 DN 15 18 mm 4221053 Pressing must be carried out to tighten the
DN 20 22 mm 4221054 connection. Only use press jaws with the
instructions.


DN 15 Rp x Rp 4221104
DN 20 Rp x Rp 4221106

DN 15 15 mm 4221152
DN 15 18 mm 4221153
DN 20 22 mm 4221154

"Aquastrom UP-Therm" Flush-mounted circulation
Potable water technology "Aquanova-System" valves
"Aquastrom UP-Therm" Flush-mounted circulation valves Application:

Thermostatic circulation regulating valve for hydronic Potable water installations PN 10 for circulation
balancing of potable water circulation systems pipes according to work sheets W551 and
with floor to floor distribution W553.
bronze
DVGW and WRAS certified (PN 10).
for intermediate ceiling installations Max. water temperature 90 C.
Fixed value setting: 57 C 1C Thermal control preset to
57 C 1 C or 63C 1 C.
DN 15 Rp x Rp 4225004 With isolating facility for riser.
Automatic thermal disinfection. Disinfection
range starts about 6 K above the set
temperature. The disinfection volume flow
Fixed value setting: 63 C 1C returns to the residual volume flow
approximately 12 K above the set temperature
DN 15 Rp x Rp 4225504 to guarantee the supply of succeeding system
during thermal disinfection.
both ports flat sealing male thread Minimum residual volume flow kv= 0.05.
for intermediate ceiling installations All components in contact with the fluid are
Fixed value setting: 57 C 1C made of non-brass materials. Without dead
zone, non-rising stem, maintenance-free stem
DN 15 G xG 4226004 seal due to double O-ring made of EPDM, 8
complete with insulation shell made of
Fixed value setting: 63 C 1C expanded polystyrene according to the
DN 15 G xG 4226504 building material class B1 according to DIN
4102.
for the universal connection of pipes For further information see
for flush-mounting or front-wall installation, "Technical information":
Fixed value setting: 57 C 1 C
DN 15 Rp x Rp 4225104

for flush-mounting or front-wall installation, according to DIN EN 1057 / DVGW GW 392,
with flush-mounting pipe and protection/operating cap stainless steel pipes according to DIN EN
Fixed value setting: 57 C 1 C 10088 / DVGW GW 541.
DN 15 15 mm 4225152 original contours SANHA (SA), Geberit-
instructions.
2017 8.39
"Aquastrom UP-Therm" Flush-mounted circulation
Potable water technology "Aquanova-System" valves
"Aquastrom UP-Therm" Flush-mounted circulation valves Application:

Thermostatic circulation regulating valve for the hydronic Potable water installations PN 10 for circulation
balancing in potable water circulation systems pipes according to work sheets W551 and
with floor to floor distribution W553.
bronze
DVGW and WRAS certified (PN 10).
for the universal connection of pipes Max. water temperature 90 C.
for flush-mounting installation, Thermal control preset to
with chrome plated handle bonnet 57 C 1 C or 63 C 1 C.
With isolating facility for riser.
Fixed value setting: 57 C 1C Automatic thermal disinfection. Disinfection
range starts about 6 K above the set
DN 15 Rp x Rp 4225204 temperature. The disinfection volume flow
returns to the residual volume flow
approximately 12 K above the set temperature
Fixed value setting: 63 C 1C to guarantee the supply of the succeeding
system during thermal disinfection.
DN 15 Rp x Rp 4225704 Minimum residual volume flow kv= 0,05.
Lockshield configuration, All components in contact with the fluid are

both ports female thread according to EN 10226-1, made of non-brass materials. Without dead
for the universal connection of pipes zone, non-rising stem, maintenance-free stem
8 for flush-mounting installation, seal due to double O-ring made of EPDM,
with chrome plated protective cover complete with insulation shell made of
and 6 mm socket spanner for operation expanded polystyrene according to the
Fixed value setting: 57 C 1 C building material class B1 according to DIN
4102.
DN 15 Rp x Rp 4225304
Fixed value setting: 63 C 1C
DN 15 Rp x Rp 4225804
Lockshield configuration, Press connection:

both ports bronze press fittings For the direct connection of copper pipes
for the universal connection of pipes according to DIN EN 1057 / DVGW GW 392,
for flush-mounting installation, stainless steel pipes according to DIN EN
with chrome plated protective cover 10088 / DVGW GW 541.
and 6 mm socket spanner for operation Pressing must be carried out to tighten the
Fixed value setting: 57 C 1 C original contours SANHA (SA), Geberit-
DN 15 15 mm 4225352 corresponding size. Processing must be
instructions.

8.40 2017
Potable water technology "Aquanova-System" "Aquastrom UP-MS" Water meter installation set
"Aquastrom UP-MS" Water meter installation set Application:

Water meter installation set DN 20, consisting of Potable water installations PN 10,
flush-mounted isolating valve and water meter housing max. water temperature 90 C.
with universal G2-coaxial thread, for the fixing of (The specifications of the manufacturer
measuring capsules of different manufacturers up to of the measuring capsules must be observed!)
Qn 1,5 m/h. For an optimum installation and alignment
of water meters and isolating valves. Completely pre-assembled and leak tested
Complete pipe section made of bronze. unit. Complete pipe section made of bronze,
one-piece casted.
Model "Duo"
Two pipe model consisting of hot and cold Sound absorbing according to DIN EN ISO
water riser, distance between pipe centres 153 mm, 3822 produt group I.
including protection caps and fixing set,
optionally dividable. DVGW certified.
DN 20 Rp x Rp 4223216 Supplied with fixing set for wall attachment or

front-wall installation, measuring capsules not
included.
Model "Uno"
One pipe model consisting of hot or cold water Thermal insulation by high-quality insulation
riser, including protection caps and fixing set shells made of special expanded polystyrene
according to the German Energy Saving
DN 20 Rp x Rp 4223116 Directive (EnEV), building material class B1
(hardly inflammable) according to DIN 4102. 8
Operation of the isolating valve during the
construction phase with the help of the
protection cap.
Connections:
Both ports female thread Rp according to
EN 10226-1.
Water meter connection with universal G 2
coaxial thread.
2017 8.41
Potable water technology "Aquanova-System" Accessories for "Aquastrom" flush mounted valves
Accessories for "Aquastrom" flush mounted valves
Valve inserts Spare valve insert for flush-mounted valves

"Aquastrom UP" manufactured since 2017 and
Spare valve insert "Aquastrom UP-F" and "Aquastrom UP-MS" water meter installation sets "Aquastrom
UP-MS".
DN 25/ DN 32 4220191
DN 20 4223191
Spare valve insert "Aquastrom UP-F" manufactured up to 2016 Spare valve insert for flush-mounted valves
"Aquastrom UP-F" manufactured up to 2016.
DN 15/ DN 20 4220190
Spare valve insert "Aquastrom UP-KFR" Spare valve insert for flush-mounted valves
"Aquastrom UP-KFR".
DN 15 / DN 20 4221090
8
Spare valve insert "UP-Therm" Spare valve insert for flush-mounted valves
"Aquastrom UP-Therm".
for circulation module 57 C 4225090
DN 15
for circulation module 63 C 4225590
DN 15
8.42 2017
Accessories for "Aquastrom UP" flush-mounted valves
Potable water technology "Aquanova-System" without flush-mounting pipe
Packing
unit

Standard bonnet handwheel set For the operation of all flush-mounted valves
suitable for flush-mounted valves with flush-mounting pipe "Aquastrom UP" when using the flush-
consisting of bonnet product assembly with clamping unit, mounting pipe. With handwheel and locking
toothed spindle, chrome plated rosette cover, screw for fixing in the flush-mounting pipe.
chrome plated operating element and
three coloured marking laminas
Handwheel set DN 15/ DN 20 4229001

Handwheel set DN 25/ DN 32 4229002
Lockshield bonnet handwheel set For the operation of all flush-mounted valves
suitable for flush-mounted valves with flush-mounting pipe "Aquastrom UP" when using the flush-
consisting of bonnet product assembly with claming unit, mounting pipe. With socket spanner and
toothed spindle, chrome plated rosette cover, locking screw for fixing in the flush-mounting
chrome plated operating element, three coloured marking laminas pipe.
and hexagon socket spanner for operation
Bonnet set DN 15/ DN 20 4229010

Bonnet set DN 25/ DN 32 4229011
8
Spare flush-mounting pipe
with toothed spindle and
protection/operating cap
DN 15/ DN 20 (25) 4229015

DN 25/ DN 32 (25) 4229016
Extension set flush-mounting pipe For an increase of the installation depth by

90 mm.
DN 15/ DN 20 (10) 4229040
DN 25/ DN 32 (10) 4229041
Mounting set for front-wall installation To be screwed onto the flush-mounting pipe.
DN 15/ DN 20 (10) 4229020

DN 25/ DN 32 (10) 4229021

Bonnet handwheel set 4223192 For the operation of all flush-mounted valves
For wall construction 0 - 35 mm "Aquastrom UP-F" manufactured since 2017
Consisting of chrome plated operating element, and all water meter installation sets
chrome plated rosette cover, chrome plated sleeve "Aquastrom UP-MS".
and coloured marking laminas
Bonnet handwheel set long 4223195 Further information regarding installation

For wall construction 35 - 90 mm options of the accessories of the flush-
Consisting of chrome plated operating element, mounted valves and the wall installation height
chrome plated rosette cover, adjustable plastic can be found in the "Technical information".
extension and coloured marking laminas
Lockshield bonnet set 4223196

For wall construction 0 - 40 mm
Lockshield bonnet set long 4223193

For wall construction 35 - 135 mm
Handwheel 4223197
for surface-mounted installation
2017 8.43
Potable water technology "Aquanova-System" General accessories
Packing
unit
General accessories
Pipe socket wrench for all flush-mounted valves
DN 15 - DN 32 (25) 4229035
Spare insulation shells
DN 15/ DN 20 4229050
DN 25 4229051
DN 32 4229052
Spare insulation shells for water meter installation sets

"Aquastrom UP-MS"
Model "Duo" 4223290
Model "Uno" 4223190
Fixing set 4223194 Consisting of 4 elbows, 4 screws and 4 discs.

consisting of 4 elbows
and fixing material
8.44 2017
8.h "Aquastrom K" Thermostatic cold water circulation
Potable water technology "Aquanova-System" valve
Page

Content
"Aquastrom K" 8.46
Accessories 8.46
2017 8.45
Potable water technology "Aquanova- "Aquastrom K"
System" Accessories
Packing
unit
"Aquastrom K" Application:

Thermostatic cold water circulation valve Potable water installations PN 10 for cold water
Thermostatic double regulating and commissioning valve systems.
for the hydronic balancing of chilled
potable water or domestic water systems WRAS certified.
bronze
Max. water temperature 25 C.
both ports female thread according to EN 10226-1 Thermal control preset to 8 C 1 C
for intermediate ceiling installations (4205904), to 20 C 1 C (4206304).
With isolating facility.
Temperature adjustable between 6C and 18 C
The valve opens above the set temperature
DN 15 Rp x Rp 4205904 and automatically increases the cold water
volume flow. Thus, the valve allows an
automatic, thermally controlled hydronic
Temperature adjustable between 12 C and 24 C balancing in cold water circulation pipes. This
way, the supply of chilled potable water at
DN 15 Rp x Rp 4206304 each draw off point of the system is
guaranteed.
Minimum cold water volume flow kv = 0.05
Adjustable temperature range:

8 6 C - 18 C (4205904),
12 C - 24 C (4206304)

are made of non-brass materials, without dead
zone, non-rising stem, maintenance-free stem
seal due to double O-ring seal made of EPDM,
complete with insulation shells made of EPS
according to the German Energy Saving
Directive (EnEV), fire protection class B1
Note:
In order to improve diffusion tightness, the
insulation shells have to be sealed with
silicone.
With the accessories (page .43) the double

regulating and commissioning valve can be
used as flush-mounted valve or in dry-build
systems.
Accessories
Spare valve insert cold water module
adjustable between 6 C and 18 C 4205990

adjustable between 12 C and 24 C 4205992
Spare insulation shells
DN 15/ DN 20 4229050
Thermometer 0-30 C The control thermometer can be screwed into

for potable water temperature control all valves with G threaded coupling.
with draining valve for hose connection
DN 8 G (25) 4205991
8.46 2017
Potable water technology "Aquanova-System" 8.i "Brawa-Mix" Thermostatic mixing valves
Page

Content
"Brawa-Mix" 8.48
Accessories 8.49
Strainers 8.49
2017 8.47
Potable water technology "Aquanova-System" "Brawa-Mix"
Packing
unit
"Brawa-Mix"
Thermostatic mixing valve
with "fail-safe" function
Bronze, spring made of vanadium steel, control Application:

piston made of polyphenylene ether, EPDM O-rings, Potable water installations PN 10,
both ports flat sealing male thread according to up to 90 C.
DIN ISO 228, handwheel lockable and lead lockable Control range: 35 C up to 65 C
Connection fittings: from page 8.66
DN 20 G 1 xG1 xG1 1300306
DN 25 G 1 x G 1 x G 1 1300308 Awards:
DN 32 G 1 x G 1 x G 1 1300310 German Designer Club
Good Design 08
universal
design
Bronze body, brass components resistant Application:

to dezincification, brass couplings, Potable water installations PN 10,
G 1 male thread with 3 collar nuts up to 90 C.
8 DN 20 G 1 xG1 xG1 1300351
Control range: 35 C up to 50 C
without collar nuts 1300352

(for compression fittings)
without "fail-safe" function Application:

Bronze body, brass components resistant Potable water installations PN 10,
to dezincification, brass couplings up to 90 C, with lateral mixed water
outlet.
G 1 male thread (25) 1300200 Control range: 30 C up to 70C
without collar nuts
as above but with lead lockable (20) 1300251

protection cap,
preset to 57 C,
with 3 collar nuts and gaskets
8.48 2017
Accessories
Potable water technology "Aquanova-System" Strainers
Packing
unit
Accessories
Insulation shells made of expanded polypropylene for thermostatic

mixing valves according to the German Energy Saving Directive
(EnEV), building material class B2 according to DIN 4102
DN 20 1300385 For item no. 1300306

DN 25/DN 32 1300386 For item no. 1300308-10
Accessories sets (for item no. 1300351)

Set 1 = 3 tailpipes
with male thread R (10) 1300391
Set 2 = 3 solder tailpipes 15 mm (10) 1300392

Compression fittings 3-fold complete with 3 collar nuts Only for item no. 1300352.
8
15 mm (10) 1300381
18 mm (10) 1300382
22 mm (10) 1300383
Bronze inline thermometer with dial For connection to the Brawa-Mix.

40 60
20 80
DN 20 G 1 c/nut xG1M 1300952 Length: 74 mm

DN 25 G 1 c/nut x G 1 M 1300953 Length: 70 mm
DN 32 G 1 c/nut x G 1 male 1300954 Length: 81 mm
Bronze non-return valve for cold water Up to 95 C
DN 20 Rp x Rp 1302006 Length: 61 mm
DN 25 Rp 1 x Rp 1 1302008 Length: 81 mm
DN 32 Rp 1 x Rp 1 1302010 Length: 91 mm
Strainers Accessories: page 5.32

bronze, with stainless steel wire basket
for the protection of the thermostatic mixing WRAS (United Kingdom) certified for
valve against contaminations and malfunctions installation in potable water systems.
with simple wire basket, 600 m
DN 20 Rp x Rp (10) 1120006
DN 25 Rp 1 x Rp 1 (10) 1120008
DN 32 Rp 1 x Rp 1 (5) 1120010

Potable water technology "Aquanova-System" 8.j "Regucirc" Circulation stations
Page

Content
"Regucirc B" 8.52
"Regucirc M" 8.53
2017 8.51
Potable water technology "Aquanova-System" "Regucirc B"
"Regucirc B" Application:

Potable water installations PN 16,
DN 20 G 1 male thread x male thread max. water temperature 90 C.
Circulation pump group
for use in detached or semi-detached houses, Completely pre-assembled and leak tested
consisting of an energy-saving high-efficiency pump, feed unit for circulation systems in detached or
a non-return check valve, a thermostatic valve semi-detached houses.
"Aquastrom VT" and a control thermometer
Both ports G 1 male thread, complete with
with Biral pump AXW 12 4206776 insulation shell made of EPP according to the
Circulation pump with bronze body, German Energy Saving Directive (EnEV), with
high-efficiency pump, isolating facility for an easy replacement of the
automatic infinitely variable speed control pump.
Max. continuous operating temperature: 90 C
Award:
Award iF

Accessories
Biral high-efficiency pump AXW 12 4206790

G 1 x 120 mm, 230 V, 50 Hz
Thermometer (bimetal) The draining valve with hose connection,

item no. 4205593, is required for
NG 50 4205591 installation.
Spare insulation shell 4206795
8.52 2017
Potable water technology "Aquanova-System" "Regucirc M"
Packing
unit
"Regucirc M" Application:

DN 20 G 1 male thread x male thread max. water temperature 90 C.
Circulation pump group with thermostatic mixing valve
for use in detached or semi-detached houses, Completely pre-assembled and leak tested
consisting of an energy-saving high-efficiency circulation mixing and feed unit for circulation
pump, a non-return check valve, ball valves with systems in detached or semi-detached houses.
thermometer and a thermostatic mixing valve
(control range 35 C - 65 C) With flat sealing connections G 1 male thread x
male thread, complete with insulation shell
with Biral pump AXW 12 4206780 made of EPP according to the German Energy
Saving Directive (EnEV).
Circulation pump with bronze body, With isolating facility for an easy replacement
high-efficiency pump, of the pump or the thermostatic mixing valve.
automatic infinitely variable speed control
Max. continuous operating temperature: 90 C

Accessories
Biral high-efficiency pump AXW 12 4206790

G 1 x 120 mm, 230 V, 50 Hz



L = 300 cm
Spare insulation shell 4206797
Strainer WRAS certified.

bronze, with stainless steel wire basket 600 m for the protection of
the thermostatic mixing valve against contaminations and
malfunctions
with simple wire basket, 600 m
DN 20 (10) 1120006
2017 8.53
Potable water technology "Aquanova-System" 8.k "Regudrain" Flushing station
Page

Content
"Regudrain" Flushing station 8.56
Accessories 8.56
2017 8.55
"Regudrain" Flushing station
"Regudrain" Flushing station Application:

Hygiene flushing station for the maintenance max. water temperature 90 C.
of normal operation in potable water systems,
for instance during interruptions of use. For the installation at the end of the riser or in
ring circuits.
Completely pre-assembled and leak tested
Model "Duo" 4207005 unit. Bracket for front-wall installation systems
For the protection of two risers and wall attachment. Insulation made of
in a potable water installation expanded polypropylene. Flushing riser with
solenoid valve and flow sensor, with isolating
facility. Free outlet according to EN 1717 for
the connection to the sewerage network.
Connections:
Potable water circuit: G , flat sealing
Sewerage network: DN 40
Electronic controller "Regtronic HS" for valve

control, individually programmable, with web
Model "Uno" 4207004 access and log function.
as 4207005, but for the protection of one riser
(PWC or PWH) in a potable water installation Suitable for the protection of the
8 PWC or PWH circuit .
DVGW certified according to W 540.
Accessories
Extension set "Duo" 4207094 Completely pre-assembled and leak tested unit
for the extension of the model "Uno" by a including fixing material.
second flushing riser (PWC or PWH)
Extension ring circuit 4207095 "h" fitting for the extension of the "Regudrain"
"h" fitting for the connection in ring circuits flushing station for installation in ring circuit
G collar nut x G x G systems. 2 sets are required for the model
"Duo".
"Sensor LW TQ"
Sensor element PT 1000 1150090 For remote monitoring of the riser temperatures
G , bronze body, and integration into a centralised building
temperature sensor made of stainless steel, control system.
two wire system
Humidity sensor 4207099
Sensor cable 4207098 One sensor cable with plug, item no. 4207098,
1500 mm, bipolar with plug is required for the connection of the sensors
and connecting terminal 1150090, 1369095 and 4207099 to the flushing
station.
8.56 2017
"Regudrain" Flushing station
Continuous operating temperature range:

Temperature sensor attached to the pipe 1369095 up to 180 C
Sensor element PT 1000, L = 150 mm
with fixing clamp 25 - 40
and heat conducting paste
Tiling ready frame 4207090 Made of aluminium, infinitely adjustable

between 200 mm x 350 mm and
520 mm x 620 mm, including fixing
material.
Surface-mounted cover 4207091 Dimensions (W x H x D):

for flushing station 315 mm x 472 mm x 108 mm
steel, galvanised
white lacquered
Flushing valve 24 V DC 4207092

with flow sensor, flow controller
and jet regulator
Siphon for flushing station 4207093

8
Jet regulator for flushing valve 4207097
Flow controller for flushing valve
Model 7 l/min. 4207089

Model 5 l/min. 4207096
2017 8.57
Potable water technology "Aquanova-System" 8.l "Aquamodul" Distributor system for potable water
Page
OV
Content
DN25 /15
T-distributor 8.61
Extension 8.61
Elbow 8.61
"Aquanova Compact" Water filter 8.62
EAS - One pipe connection piece 8.62
Pressure relief cap 8.62
Bypass valve 8.62
Fill and drain ball valve 8.63
Draining ball valve 8.63
"Optiflex" Fill and drain ball valve 8.63
Bracket 8.63
Accessories 8.64
8
2017 8.59
Potable water technology "Aquanova-System" 8.l "Aquamodul" Distributor system for potable water
Water meter Aquamodul Distributor system for potable water

connection
Wasserzhler Connection to Prescribed accor- Possibly required Distribution:

water meter ding to DN 1988: Fittings
Filtration Isolating valves and fittings
Connection of Extension Connection of
Distributors
valves and water purifiers
fittings both ports
flat sealing male
6 thread G 114
(e.g. pressure 14
reducer)
13
12 7
D N OV
QC 25
12 3 8
OV
OV DN 25 OV OV
DN25 DN25 /15 DN25/15
4
1 2
10
DN OV
QC 25
8 5
11
The Oventrop distributor system for potable water made of bronze Advantages:
(PN 16) enables a fast installation of pipework for domestic water
bronze bodies
distribution. The components are connected by using flat sealing
(all parts coming into contact with potable water
screws. The G 1 distributor line has a G 114 collar nut at the inlet port
are made of non-brass materials)
and is male threaded accordingly at the outlet port.
The dimension is 140 mm. simple and quick installation
For connecting the columns, the T-pieces (pos. 1 and 2) and the all valves and fittings with flat sealing male thread
elbow (pos. 4) are equipped with a collar nut and are suitable for a G 11/4 may be connected
direct connection of isolating valves and fittings with flat sealing male all isolating valves and fittings with flat sealing male
thread G 114, G 1 or G 34 (pos. 5). thread G 11/4, G 1 or G 34 may be connected
A suitable domestic water station (pos. 6) or a water filter (pos. 7) all standard pipe materials may be connected
can be directly incorporated into the system.
The one pipe connection piece EAS (pos. 8) serves to connect standard pipe fixing devices for DN 25 may be used
Oventrop water- and backflush filters with one pipe connection piece.
Water purifiers or pipe flushing devices can be connected
by use of the bypass valve (pos. 11).
Also available are extensions (pos. 3), pressure relief caps (pos. 10),
nipples (pos. 12) and connection fittings for all standard pipes
(pos. 14).
8.60 2017
T-distributor
Extension
Potable water technology "Aquanova-System" Elbow
Packing
unit
T-distributor Application:
OV
DN25 /15
flat sealing (140 mm) max. water temperature 120 C.
Inlet port: collar nut G 1
Outlet port: male thread G 1 Connection of isolating valves and fittings with
Column: flat sealing male thread G , G 1 or G 1 .
collar nut G (10) 4200252 Bracket: page 8.63

collar nut G 1 (10) 4200253
collar nut G 1 (10) 4200254
Extension
bronze
OV
DN25
flat sealing (140 mm)

Outlet port: male thread G 1
(10) 4200256
Elbow Connection of isolating valves and fittings with

OV
DN25/15
bronze flat sealing male thread G .
8
Column:
collar nut G (10) 4200255
2017 8.61
"Aquanova Compact" Water filter
Potable water technology "Aquanova-System" EAS - One pipe connection piece
Packing
unit
"Aquanova Compact" Water filter Application:

with transparent plastic filter cup PN 16 Potable water installations PN 16,
Head: bronze 4202508 DVGW and ACS certified.
flat sealing
Filter insert: plastic body covered with mesh Length: 140 mm
Mesh size: 100-120 m
EAS - One pipe connection piece Connection of the Oventrop bypass valve, item
no. 4200308.
for the connection of the 4200208
Oventrop bypass valve
bronze
Pressure relief cap For closing or bridging the EAS one pipe
to close the EAS one pipe connection piece, connection piece until a water purifier is
8 with ring gasket and fixing screws,
bronze
installed.
without connection thread (10) 4200211

with connection thread Rp (10) 4200212
Bypass valve For connecting or bridging a water purifier or a

for the connection to the EAS one pipe connection piece, pipe flushing device.
with ring gasket and fixing screws, Max. water temperature 90 C, PN 10.
bronze
Connections: G 1 male thread 4200308
8.62 2017
Draining ball valve
"Optiflex" Fill and drain ball valve
Potable water technology "Aquanova-System" Bracket
Packing
unit
Fill and drain ball valve Max. PN 16 and 90 C (150 C).

bronze
handle with stop

with hose connection and cap
DN 10 G (50) 1032403
OV
Draining ball valve
DN 8 G (25) 4200191
"Optiflex" Fill and drain ball valve PN 10, DN 15R (reduced)

brass, outside nickel plated Max. water temperature: 90 C
DVGW certified. 8
Handle with stop, with male thread,
self sealing with counternut,
with cap
DN 15 G (50) 1033152
Bracket
12
4200295 Clamping range 31-35 mm.
consisting of To fix the distributor components onto the wall.
2 clamp rings with rubber profile layer, Item no. 4200252-56: page 8.61
2 blind screws M 10 and
suitable dowels
2017 8.63
Packing
unit
Accessories
Double fitting For the integration of valves and fittings with

bronze, flat sealing (38 mm) flat sealing male thread G 1 .
both ports collar nut G 1
(10) 4200285
Double nipple
bronze
both ports R 1 (10) 4200283
Nipple
bronze
R 1 x G 1 (10) 4200284
Cap For closing the T-distributor, item no.

brass 4200254 (if no elbow is used).
with closed seal
8 G 1 female thread (10) 4200291
Plug For closing the distributor connections.

bronze
DN 15 G (10) 4200289
DN 20 G1 (10) 4200288
DN 25 G 1 (10) 4200290
Venting screw
brass

Drain valve Max. pressure and temperature:

self sealing, with rotating outlet 10 bar, 100 C, with connection nipple
made of brass resistant to dezincification for hose. Seal made of EPDM.
Handwheel and outlet anthracite coloured For draining and bleeding, for use
in potable water systems.
8.64 2017
Potable water technology "Aquanova-System" 8.m "Ofix" Connection fittings
Page
8.m "Ofix" Connection fittings

Content
"Ofix" Connection fittings 8.66
2017 8.65
Potable water technology "Aquanova-System" 8.m "Ofix" Connection fittings
Packing
unit
"Ofix" Connection fittings
Tailpipe (bronze), flat sealing, with male thread according to

R x G 1 (collar nut) (10) 4201471

R x G (collar nut) (10) 4201472
R x G 1 (collar nut) (10) 4201473
R1 x G 1 (collar nut) (10) 4201474
R 1 x G 1 (collar nut) (5) 4201475
R 1 x G 1 (collar nut) (5) 4201476
R2 x G 2 (collar nut) (5) 4201477
Tailpipe (bronze), flat sealing, with female thread according to

Rp x G (collar nut) (10) 4201372

Rp x G 1 (collar nut) (10) 4201373
Rp x G 1 (collar nut) (10) 4200282
Rp 1 x G 1 (collar nut) (10) 4201374
Rp 1 x G 1 (collar nut) (5) 4201375
Rp 1 x G 1 (collar nut) (5) 4201376
8 Rp 2 x G 2 (collar nut) (5) 4201377
Rp 2 x G 3 (collar nut) 4201378

Rp 3 x G 3 (collar nut) 4201379
Solder tailpipe (bronze), flat sealing,

with collar nut and ring gasket (EPDM)
15 mm x G (collar nut) (10) 4202072

15 mm x G 1 (collar nut) (10) 4200272
18 mm x G (collar nut) (10) 4202073
18 mm x G 1 (collar nut) (10) 4200273
22 mm x G 1 (collar nut) (10) 4202074
28 mm x G 1 (collar nut) (10) 4202075
35 mm x G 1 (collar nut) (5) 4202076
42 mm x G 1 (collar nut) (5) 4202077
54 mm x G 2 (collar nut) (5) 4202078
Weldable tailpipe (steel), flat sealing,

with collar nut and ring gasket (EPDM)
DN 15 x G (collar nut) (10) 4200572

DN 20 x G 1 (collar nut) (10) 4200573
DN 25 1 x G 1 (collar nut) (10) 4200574
DN 32 1 x G 1 (collar nut) (5) 4200575
DN 40 1 x G 1 (collar nut) (5) 4200576
DN 50 2 x G 2 (collar nut) (5) 4200577

Potable water technology "Aquanova-System" 8.n Domestic water station/Heating system filling station
Page

Content
Domestic water station 8.68
2017 8.67
Domestic water station
Potable water technology "Aquanova-System" Heating system filling station
Domestic water station Application:

consisting of backflush filter, Potable water installations PN 16,
pressure reducer with bronze water temperature up to 90 C.
swivel connection piece for
horizontal and vertical installation Mesh size: 95-110 m
and with bronze male threaded Pressure at station inlet:
couplings. min. 1.5 bar, max. 16 bar
Body and transparent cup made Pressure at station outlet:
of plastic adjustable between 1.5 and 6 bar
(factory preset to 4 bar)
DN 20 R 4204506
DN 25 R1 4204508 DVGW certified (PN 10).
DN 32 R 1 4204510
Compact unit with backflush filter, pressure
reducer, pressure gauge and male threaded
Accessories couplings.
Pressure reducer insert 4204590 For further information see

Filter insert 100 m 4204591 "Technical information":
Filter cup, complete 4204592
Pressure gauge 4204593
8
Heating system filling station Application:
Filling combination according to DIN EN 1717 for Potable water installations PN 10.
heating systems consisting of strainer, pressure Max. water temperature
reducer, system separator type BA and drain water at the inlet port: 30 C
connection, with isolating facility for maintenance. Max. water temperature
Brass body, cartridges of system separator and at the outlet port: 65 C
pressure reducer made of plastic.
DN 15 G 1055004 Outlet pressure adjustable between
1 and 5 bar (factory preset to 1.5 bar).
According to DIN EN 1717 all installations have

to be realised intrinsically safe and as
permanent connections.
Hence filling of the heating system has to be
carried out via a system separator type BA or
Accessories BC!
Replacement cartridge 1055095 DVGW certified.

for system separator
Replacement cartridge 1055096

for pressure reducer
8.68 2017
Potable water technology "Aquanova-System" 8.o "Aquanova" Water filters
Page

Content
"Aquanova Compact" Water filters 8.70
Accessories 8.70
"Aquanova Magnum" Water filters 8.71
Accessories 8.72
2017 8.69
"Aquanova Compact" Water filters
Packing
unit
"Aquanova Compact" Water filters Application:

with transparent plastic filter cup (Trogamid T) PN 16 Potable water installations PN 16,
Head: brass DVGW and ACS certified.
Filter insert: plastic body covered with mesh
Mesh size: 100-120 m Awards:
Max. water temperature: 30 C ISH Frankfurt
"Design Plus"
Design Award
DN 25 Rp 1 x Rp 1 6120508 Switzerland

Head and tailpipes: bronze

both ports flat sealing male threaded tailpipes
according to EN 10226-1
DN 20 R 6122506
DN 25 R1 6122508
DN 32 R 1 6122510
8
Head: bronze 4202508
flat sealing
Filter insert: plastic body covered with mesh Length: 140 mm
Mesh size: 100-120 m
Accessories
Venting screw
brass
Filter cup made of Trogamid T 6120581
Filter insert 100-120 m, (10) 6120591

DIN-DVGW tested,
hygienically packed
O-ring for filter cup 6120595
Special key to loosen 6124100

filter cup
8.70 2017
Potable water technology "Aquanova-System" "Aquanova Magnum" Water filters
"Aquanova Magnum" Water filters Application:

Head and collar nut: brass Potable water installations PN 16.
Filter insert (one piece):
plastic body covered with mesh
Max. water temperature: 30 C
Mesh size: 95-140 m
with transparent plastic filter cup (Trogamid T) PN 16 DVGW and ACS certified.
DN 25 Rp 1 x Rp 1 6120008
DN 32 Rp 1 x Rp 1 6120010
DN 40 Rp 1 x Rp 1 6120012
DN 50 Rp 2 x Rp 2 6120016
with brass filter cup PN 16

DN 25 Rp 1 x Rp 1 6120108
with transparent plastic filter cup (Trogamid T) PN 16 DVGW and ACS certified.
both ports male threaded tailpipes according to DIN EN 10226-1 8
DN 20 R xR 6122006 "Technical information":
DN 25 R1 xR1 6122008
DN 32 R 1 x R 1 6122010
with transparent plastic filter cup (Trogamid T) PN 16 For industrial use.

Mesh size: 250280 m
DN 25 Rp 1 x Rp 1 6120058
DN 32 Rp 1 x Rp 1 6120060
DN 40 Rp 1 x Rp 1 6120062
DN 50 Rp 2 x Rp 2 6120066
2017 8.71
Packing
unit
Accessories
Venting screw
brass
Blind plug with ring gasket
DN 6 G (10) 6127200
2 pressure gauges with ring (50) 6127000 Downward connection.

gasket for all sizes DN 6 G
Special key to loosen 6124000

filter cup
8 Collar nut 6125000

O-ring for filter cup (10) 6126000
Filter cup made of Trogamid T 6125400
Filter cup made of brass 6125500
Filter inserts
Filter insert 95-140 m, 6125101

hygienically packed, DIN-DVGW tested
Filter insert 80-120 m, (10) 6125100 Consisting of body, collar and mesh, for
multi-piece, hygienically packed industrial use.
Filter insert 250-280 m, (10) 6125161
multi-piece
Filter insert 800-1000 m, 6125163
multi-piece
Body with collar (10) 6125200
Mesh may only be used for multi-piece

Mesh 80-120 m, (150) 6125300 filter element.
hygienically packed If required, body and collar have to be
Mesh 250-280 m (50) 6125361 ordered separately (item no. 6125200).
Mesh 650-800 m (50) 6125363
8.72 2017
Potable water technology "Aquanova-System" 8.p Valves for water softening
Page

Content
Bypass isolating valve 8.74
Accessories for bypass isolating valve and 8.74
Spare parts 8.75
Spare parts 8.76
2017 8.73
Potable water technology "Aquanova-System" Bypass isolating valve
Packing
unit
Bypass isolating valve Application:

brass, Potable water softeners PN 10,
for installations with integrated bypass mixing valve max. water temperature 90 C.
with isolating valves and draining plugs, For further information see
with draining facilities G and G "Technical information":
Bypass valve in lockshield configuration
DN 25 Rp 1 x Rp 1 6105008
Bypass valve with handwheel
DN 25 Rp 1 x Rp 1 6105108
Accessories for bypass isolating valve and

8 Bonnet, flat sealing 6109551 Up to July 2004
Bonnet with O-ring 6109552 Since July 2004
brass
Coupling
DN 25 G 1 xR1 (50) 6100508
S-type coupling Two couplings or two flexible hoses are

required for each bypass isolating valve
DN 20 G 1 xG (50) 6100606 6105008/6105108.
DN 25 G 1 xG1 (50) 6100608
Flexible hose
WA-NIRO, 600 mm long
DN 25 G 1 (c/nut) x G 1 (male thread) 6105751
8.74 2017
Bypass mixing valve DN 25
Potable water technology "Aquanova-System" Bypass mixing valve DN 32
Bypass mixing valve DN 25 Application:

bronze body Potable water softeners PN 10,
with isolating valves for the direct connection of the water softener
by using the couplings or flexible hoses on page 8.74 ACS certified.
DN 25 G 1 x G 1 (male thread) 6101008 Two couplings or two flexible hoses are

DN 25 G 1 x G 1 (male thread) 6101051 required for each bypass mixing valve, item no.
6101051 / 6101008.

Spare parts
Bonnet, flat sealing 6109551 Up to July 2004

Bonnet with O-ring 6109552 Since July 2004
brass
8
Brass regulating bonnet for setting of high flow rates
(bonnet with adjustment spindle, regulating insert, and spring)
brass 6101053
Brass valve insert for setting of low flow rates
brass 6102051

bronze body,
brass bonnet
For industrial installations.

DN 32 G 1 6102010 ACS certified.

Spare parts
Brass regulating bonnet for setting of high flow rates

(bonnet with adjustment spindle, regulating insert, and spring)
brass 6102053
Brass valve insert for setting of low flow rates
brass 6102051
2017 8.75
Potable water technology "Aquanova-System" Bypass mixing valve DN 50

bronze body,
brass bonnet
For industrial installations.

DN 50 G2 6102016
Spare parts
Bonnet with adjustment spindle
8 brass 6109052
Regulating insert with diaphragm

and spring
bronze 6109152
Regulating screw for setting

of low flow rates
brass 6109851
8.76 2017
Potable water technology "Aquanova-System" 8.q Connection system
Page
8.q Connection system

Content
Connection of pipes and Oventrop valves with different connections in potable water installations 8.78
2017 8.77
Potable water technology "Aquanova-System" 8.q Connection system
Connection of pipes and Oventrop valves with different connections in potable water installations

method
Connection fitting Additional fitting Oventrop valves for water installations (examples)
Screwed

OV ..
DN QC
connection Item no. 15073..
DN 15 Page 11.32
Press
Copipe
Composition connection Item no. 15120.. Page 11.12
pipe
OV ..
DN QC
Screwed
connection
Item no. 15079.. Item no. 11.32 Item no. 15031..
Page 11.32
OV ..
D N QC
Item no. 10271..
Copper pipe Screwed DN 15 DN 20 Page 3.45
DN 1057 connection
G 3/4 cone Euro metal to metal sealing

Item no. 102747. Page 1.141
OV ..
Copper pipe,
D N QC
stainless steel pipe, Screwed Item no. 15031..
Page 11.32
precision steel pipe connection G 3/4 cone Euro soft sealing
1) Item no. 102744. Page 1.141
Steel pipe as well
as screwed fittings seal directly
Male threaded connection
Press

Copipe connection
Item no. 15121.. Page 11.12
Composition
pipe Screwed
connection Oblique pattern free-flow
Item no. 15079.. Page 11.32 valves and KFR valves
OV ..
DN QC
Aquastrom with normal male thread

Copper pipe Screwed
DN 1057 connection G 3/4 cone Euro metal to metal sealing
Item no. 102747. Page 1.141 Item no. 15030..
Page 11.32
Copper pipe,
stainless steel pipe, Screwed
precision steel pipe connection G 3/4 cone Euro soft sealing
1) Item no. 102744. Page 1.141
Brass solder tailpipe, collar nut

and ring gasket
Copper pipe Soldering

DN 1057 connection Item no. 42020..
and 42002.. Page 8.66
Copper pipe
(galvanised) Screwed Item no. 42013..
and 42002.. Page 8.66
as well as connection
screwed fittings
Item no. 42014.. Page 8.66
Other pipe e.g.

stainless steel pipe, Other pipes may be connected by use of the fittings of the
thick walled plastic corresponding manufacturers
pipe
1) Pipes with a wall thickness 1 mm will need reinforcing sleeves, item no. 2083951/52 or 1029651-57 (page 1.143), unless
the soft sealing fitting 102744.! Page 1.136.2) Handbuch Combi-System
8.78 2017
Potable water technology "Aquanova- 8.r Stations for hot potable water preparation/Other products for
System" water installations
Page
8.r Stations for hot potable water preparation/Other products for water installations
Content
"Regumaq" Stations for hot potable water preparation 8.80
2017 8.79
8.r Stations for hot potable water preparation/Other products for water
Potable water technology installations
"Aquanova-System" "Regumaq" Stations for hot potable water preparation
Regumaq X-30 Page 6.100.

Heat exchanger system with electronic controller
Regumaq XZ-30 Page 6.100.

and connection for potable water circulation systems
Regumaq X-80 Page 6.107.

and connection for potable water circulation systems.
For higher discharge capacities.
Regumaq K Cascade control set for the installation

Cascade control set of up to four Regumaq stations in
for hot potable water preparation parallel for increased potable water
demand.
Page 6.103.
Regudis W Dwelling stations Dwelling station with plate heat

exchanger for heat transmission from
a central heat supply to the sanitary
and heating installation of a dwelling.
Page 6.79.
8.80 2017
Solar thermal energy Content
Page
9.a "Regusol" stations and "Regtronic" controllers for solar thermal energy
Content 9.05
Summary 9.06
"Regusol SH-130" Station DN 20 9.07
"Regusol LH-130" Station DN 20 9.07
"Regusol PH-130" Station DN 25 9.08
"Regusol ELH-130-RC" Station DN 25 9.10
"Regusol ELH-130-RC-P" Station DN 25 9.11
"Regusol X-Uno 25" with heat exchanger 9.17
"Regusol X-Duo 25" with heat exchanger 9.19
"Regtronic" - Electronic controllers, summary 9.21
9
"Regtronic" - Electronic controllers, pipework configurations, summary 9.22
"Regtronic" - Electronic controllers 9.21
9.b Accessories for "Regusol" stations within the collector circuit

Content 9.29
"Regusol" Compression fittings 9.31
"Regusol" Compression fittings with reinforcing sleeves 9.31
Tailpipe sets DN 32 9.32
Tailpipe sets DN 20 for "Regusol X" and "Regumaq X/XZ" stations 9.32
Accessories 9.32
Circulation pumps 130 mm 9.36
2017 9.01
Page
9.c "OKP" and "OKF" Collectors and accessories

Content 9.39
"OKP" Tube collectors 9.40
"OKP" Vertical freestanding installation 9.41
OKP Vertical freestanding / facade installation 9.41
"OKP" Roof hooks made of stainless steel 9.41
Accessories 9.42
"OKF" Flat-plate collectors 9.43
"OKF" Rooftop installation 9.44
"OKF-MQ25" Rooftop installation 9.44
"OKF" Vertical roof integration side by side 9.45
"OKF-CK22/CS22" Connection options 9.46
"OKF" Vertical freestanding installation 9.45
"OKF-MQ25" Freestanding installation 9.47
"OKF" Gravel plate set 9.48
"OKF" Roof hooks made of galvanised steel 9.49
Carrying handles for "OKF" flat-plate collectors 9.49
9 Accessories for flat-plate collector "OKF-MQ25" 9.50
9.d "Solcos" Solar packages

Content 9.51
"Solcos" Solar packages with "OKP" tube collectors 9.52
"Solcos" Solar packages with "OKF-CK22" flat-plate collectors 9.53
"Solcos" Solar packages with "OKF-CS22" flat-plate collectors 9.54
9.e "Solar" Diaphragm expansion tanks for solar thermal energy

Content 9.55
"Solar" Diaphragm expansion tanks 9.56
"Solar" In-line tanks 9.56
Accessories 9.56
9.f Pipes and connection fittings

Content 9.57
"OV-Flex ST" Flexible pipes for solar thermal energy 9.58
Further connection accessories 9.60
9.02 2017
Page
9.g Valves, temperature controllers, actuators and other accessories

97
OV
C Rg5 H Content 9.61
MIX
AB
OV
A
B

"Brawa-Mix" 9.65
Spare parts 9.66
"Optibal" High temperature ball valves 9.67
"Optiflex" Fill and drain ball valves for solar plants 9.67
Fill and drain cocks PN 16 heavy pattern - DIN 3848 9.67
9.h Further accessories

Content 9.69
Further accessories 9.70
9
2017 9.03
Solar thermal energy 9.a "Regusol" stations and "Regtronic" controllers for solar thermal energy
Page
Content
Summary 9.06
"Regusol ELH-130-RC-P" Station DN 25 9.11
"Regtronic" - Electronic controllers, summary 9.21
9
"Regtronic" - Electronic controllers, pipework configurations, summary 9.22
"Regtronic" - Electronic controllers 9.21
2017 9.05
Solar thermal energy Summary
Regusol Stations for the connection of collector and storage cylinder

Product assembly DN 20 for pump lengths 130 mm, distance between pipe centres 100 mm
Product assembly DN 25 for pump lengths 130/180 mm, distance between pipe centres 100 mm
Product assembly DN 32 for pump lengths 180 mm, distance between pipe centres 125 mm
Youmaychoosebetween
Regusolstationwithourwithoutelectroniccontroller,
Regusolstationwithdeaeratorwithandwithoutelectroniccontrollerand
Regusolpumpcircuit(returnpipe)
Modelwithpumplength Modelwithpumplength
L=130mm L=180mm
RegusolStations RegusolStations
Regusol Regusol
Regusol Regusol Regusol Regusol Regusol Regusol Regusol Regusol Regusol Regusol
ELH- ELH-130-
SH-130 LH-130 PH-130 SH-130 LH-130 PH-180 SH-180 LH-180 ELH-180- SH-180
130-RC RC-P
DN20 DN20 DN25 DN25 DN25 DN25 DN25 DN25 RCDN25 DN32
DN25 DN25
Page 9.07 9.07 9.08 9.08 9.09 9.10 9.11 9.12 9.13 9.14 9.15 9.16
ConnectionG3/4 X X

ConnectionG1Regusol
compressionfittingX X X X X X X X X
ConnectionG2malethread,flatsealingX
Ballvalvewith
integratedcheckvalve,
9 thermometerandX X X X X X X X X X X X
connectionfora
safetygroup
Ballvalvewith
integratedcheckvalve X X X X X X X X X X
andthermometer
Flowmeasuringand
regulatingdevicewith
X X X X X X X X X X X
isolation,fillingand
drainingfacility
Safetygroupwith
safetyvalve6bar,
pressuregauge10bar,
X X X X X X X X X X X X
fillanddrainball
valve,connectionto
expansiontank
Wallmountingdevice X X X X X X X X X X X X
Insulation X X X X X X X X X X X X
Insulationwithintegrated

electroniccontroller.
Thestationswithoutelectronic
controllercanbecombined
X X X
withOventropcontrollers
aswellascontrollers
ofothersuppliers.
DeaeratorX X X X X X
Height 365mm 365mm 375mm 375mm 375mm 375mm 375mm 424mm 424mm 424mm 424mm 471mm
InstallationWidth 200mm 200mm 180mm 250mm 250mm 250mm 250mm 180mm 250mm 250mm 250mm 250mm
dimensions
Depth 145mm 145mm 197mm 197mm 197mm 197mm 197mm 197mm 197mm 197mm 197mm 207mm
Controllersfortheoperationofthecompletesolarplantseepage9.21upto9.27.
9.06 2017
"Regusol SH-130" Station DN 20
Solar thermal energy "Regusol LH-130" Station DN 20
i e "Regusol SH-130" Station DN 20 Complete, pre-assembled and leak tested unit

g with safety group for the connection to the solar circuit.
f With G male thread according to DIN EN
c b h consisting of: 16313 (cone "Euro").
a
b) ball valve with integrated check valve, For copper and precision steel pipes.
thermometer and connection for safety group Alternatively, compression fittings according
k c) ball valve with integrated check valve and thermometer to DIN EN 16313 (cone "Euro") of other
d
d) flow measuring and regulating device with manufacturers may also be used.
isolation and lateral fill and drain ball valve
e) safety valve 6 bar With the option to connect an expansion tank
f) outlet G male thread to expansion tank to the safety group.
g) pressure gauge 10 bar
h) fill and drain ball valve Distance between pipe centres: 100 mm
i) wall mounting device Pump 130 mm long.
k) insulation
Control range of the flow measuring and regulating device: 2-14 l/min. Continuous operating temperature: 120 C
Short-term max. starting temperature: 160 C
Grundfos UPM 3 Solar 15-75 PWM C 130 1360033
Suitable for standard solar liquids.
e "Regusol LH-130" Station DN 20 Controllers and accessories for the operation

i
as "Regusol SH-130" station, but with deaerator of the complete solar plant: from page 9.25
g
f
c b h consisting of: To activate the pump, the controller must
a provide a PWM activation signal.
a) high-effiency pump
k b) ball valve with integrated check valve,
thermometer and connection for safety group 9
c) ball valve with integrated check valve and thermometer
l d
d) flow measuring and regulating device with
isolation and lateral fill and drain ball valve
e) safety valve 6 bar
f) outlet G male thread to expansion tank
h) fill and drain ball valve
i) wall mounting device
k) insulation
l) deaerator
Control range of the flow measuring and regulating device: 2-14 l/min.
2017 9.07
"Regusol PH-130" Station DN 25
Solar thermal energy "Regusol SH-130" Station DN 25
e "Regusol PH-130" Station DN 25 Complete, pre-assembled and leak tested unit

Pump circuit with safety group for the connection to the solar circuit.
With G 1 male threaded connection for
f consisting of: "Regusol" compression fittings to the solar
g
h a) high-efficiency pump supply and return pipe.
b
b) ball valve with integrated check valve,
thermometer and connection for safety group For copper and precision steel pipes.
a d) flow measuring and regulating device with Alternatively, compression fittings according to
isolation and lateral fill and drain ball valve DIN EN 16313 (cone "Euro") of other
e) safety valve 6 bar manufactures may also be used.
g) pressure gauge 10 bar With the option to connect an expansion tank
k d h) fill and drain ball valve to the safety group.
i i) wall mounting device
k) insulation Distance between pipe centres: 100 mm
Control range of the flow measuring and regulating device: 2-15 l/min. (station)
Pump 130 mm long.
Continuous operating temperature: 120 C

Wilo-Yonos PARA ST 25/7 PWM 2 1362063 Short-term max. starting temperature: 160 C
When connecting the "Regusol" station to a

flexible pipework (e. g. corrugated metal pipe),
the locking shackle 1369090 (page 9.32) has
to be used in addition to the wall mounting
device.
9
Controllers and accessories for the operation
of the complete solar plant: from page 9.25
To activate the pump, the controller must

provide a PWM activation signal.
e "Regusol SH-130" Station DN 25 A controller location made of expanded

as "Regusol PH-130" station, but with supply pipe polypropylene for upgrading the station with a
f controller "Regtronic RC/RC-P" is available on
g
c b h consisting of: page 9.26.
a b) ball valve with integrated check valve, Further information and ErP data:
thermometer and connection for safety group
k c) ball valve with integrated check valve and thermometer
d d) flow measuring and regulating device with
i isolation and lateral fill and drain ball valve
k) insulation
Control range of the flow measuring and regulating device: 2-15 l/min.
9.08 2017
e "Regusol LH-130" Station DN 25 Complete, pre-assembled and leak tested unit

g as "Regusol SH-130" station, but with deaerator for the connection to the solar circuit.
f With G 1 male threaded connection for
c b h consisting of: "Regusol" compression fittings to the solar
a) high-efficiency pump supply and return pipe.
a b) ball valve with integrated check valve,
c) ball valve with integrated check valve and thermometer Alternatively, compression fittings according to
l d) flow measuring and regulating device with DIN EN 16313 (cone "Euro") of other
k
d isolation and lateral fill and drain ball valve manufactures may also be used.
i e) safety valve 6 bar
f) outlet G male thread to expansion tank With the option to connect an expansion tank
g) pressure gauge 10 bar to the safety group.
i) wall mounting device Distance between the pipe centres: 100 mm
k) insulation Pump 130 mm long.
l) deaerator
Control range of the flow measuring and regulating device: 2-15 l/min. Short-therm max. starting temperature: 160 C
Wilo-Yonos PARA ST 25/7 PWM 2 1360557 Suitable for standard solar liquids.
flexible pipework (e.g. corrugated metal pipe),
Control range of the flow measuring and regulating device: 7-30 l/min. the locking shackle 1369090, (page 9.32) has
Wilo-Yonos PARA ST 25/7.5 PWM 2 1360558 device.
Controllers and accessories for the operation 9


A controller location made of expanded

polypropylene for upgrading the station with a
controller "Regtronic RC/RC-P" is available on
page 9.26.
2017 9.09
Solar thermal energy "Regusol ELH-130-RC" Station DN 25
e "Regusol ELH-130-RC" Station DN 25 Complete, pre-assembled and leak tested unit

g with safety group and electronic controller for the connection to the solar circuit.
f With integrated electronic controller for the
c b h
consisting of: control and monitoring of a solar thermal
k a a) high-efficiency pump plant according to the temperature difference
b) ball valve with integrated check valve, principle.
j thermometer and connection for safety group These stations are mainly used for hot
l c) ball valve with integrated check valve and thermometer potable water preparation.
d
i d) flow measuring and regulating device with
isolation and lateral fill and drain ball valve With G 1 male threaded connection for
e) safety valve 6 bar "Regusol" compression fittings to the solar
f) outlet G male thread to expansion tank supply and return pipe.
h) fill and drain ball valve For copper and precision steel pipes.
i) wall mounting device Alternatively, compression fittings according to
j) electronic controller DIN EN 16313 (cone "Euro") of other
k) insulation manufactures may also be used.
l) deaerator
Control range of the flow measuring and regulating device: 2-15 l/min. With the option to connect an expansion tank
to the safety group.
with Wilo-Yonos PARA ST 25/7 PWM 2 1366597
and controller "Regtronic RC" Distance between pipe centres: 100 mm
with data output (S-bus) Pump 130 mm long.


9
device.
Inputs: 4 temperature sensors (PT 1000)

Outputs: 3 relays, 1 is a volt free relay
The controller is already cabled with a

temperature sensor (PT1000).
Another temperature sensor (PT 1000) for the
connection to the collector is included.
Temperature sensors PT 1000 for the

registration of additional temperatures are
available as accessories.
9.10 2017
Solar thermal energy "Regusol ELH-130-RC-P" Station DN 25
c b e "Regusol ELH-130-RC-P" Station DN 25 Complete, pre-assembled and leak tested unit

g
with safety group, electronic flow sensor and electronic controller for the connection to the solar circuit.
f
h With integrated electronic controller for the
k consisting of: control and monitoring of a solar thermal
a
a) high-efficiency pump plant according to the temperature difference
b) ball valve with integrated check valve, principle.
j thermometer and connection for safety group
l d c) ball valve with integrated check valve and thermometer With G 1 male threaded connection for
d) electronic flow sensor (2-40 l/min.) "Regusol" compression fittings to the solar
e) safety valve 6 bar supply and return pipe.
g) pressure gauge 10 bar For copper and precision steel pipes.
h) fill and drain ball valve Alternatively, compression fittings according to
i) wall mounting device DIN EN 16313 (cone "Euro") of other
j) electronic controller manufactures may also be used.
k) insulation
l) deaerator With the option to connect an expansion tank
with Wilo-Yonos PARA ST 25/7 PWM 2 1360394
and controller OV-"Regtronic RC-P" Distance between pipe centres: 100 mm
with data output (S-bus) Pump 130 mm long.


flexible pipework (e. g. corrugated metal pipe), 9
device.
Apart from hot potable water prepration,

this station with high-efficiency pump offers
additional functions.
The integrated additional controller allows for
a support of the heating system, a difference
control or a circulation function.
Yield measurement is possible via the
electronic flow sensor.
Flow sensor without lateral fill and drain

ball valve, use filling and flushing device
"Regusol": page 9.33
Interfaces: S-bus for connection to the data

logger "CS-BS", SD-card slot for data
recording
Inputs: 4 temperature sensors (PT 1000),
1 input for electronic flow sensor (volume flow /
temperature)
Outputs: 4 relays, 1 is a volt free relay,
2 pulse-width modulation (PWM) outputs for
the speed controlled activation of high-
efficiency pumps.
2017 9.11
Solar thermal energy "Regusol PH-180" Station DN 25
e "Regusol PH-180" Station DN 25 Complete, pre-assembled and leak tested unit

Pump circuit with safety group for the connection to the solar circuit.
g consisting of: "Regusol" compression fittings to the solar
b h a) high-efficiency pump supply and return pipe.
b) ball valve with integrated check valve,
a d) flow measuring and regulating device with Alternatively, compression fittings according to
isolation and lateral fill and drain ball valve DIN EN 16313 (cone "Euro") of other
e) safety valve 6 bar manufactures may also be used.
k d g) pressure gauge 10 bar With the option to connect an expansion tank
h) fill and drain ball valve to the safety group.
i k) insulation Pump 180 mm long.
When connecting the station "Regusol" to a

device.

9 of the complete solar plant: from page 9.25

9.12 2017
e "Regusol SH-180" Station DN 25 Complete, pre-assembled and leak tested unit

f as "Regusol PH-180" station, but with supply pipe for the connection to the solar circuit.
g With G 1 male threaded connection for
c b h consisting of: "Regusol" compression fittings to the solar
k thermometer and connection for safety group For copper and precision steel pipes.
d
d) flow measuring and regulating device with DIN EN 16313 (cone "Euro") of other
i isolation and lateral fill and drain ball valve manufactures may also be used.
i) wall mounting device Distance between pipe centres: 100 mm

flexible pipework (e.g. corrugated metal pipe),
the locking shackle 1369090, (page 9.32) has
device.
Controllers and accessories for the operation 9

of the complete solar plant: page 9.25


page 9.26.
2017 9.13
e "Regusol LH-180" Station DN 25 Complete, pre-assembled and leak tested unit

g as "Regusol SH-180" station, but with deaearator for the connection to the solar circuit.
c b h
consisting of: "Regusol" compression fittings to the solar
l d
d) flow measuring and regulating device with DIN EN 16313 (cone "Euro") of other
i
isolation and lateral fill and drain ball valve manufactures may also be used.
i) wall mounting device Distance between pipe centres: 100 mm
l) deaerator
Control range of the flow measuring and regulating device: 2-15 l/min. Short-term max. starting temperature: 160 C
Wilo-Yonos PARA ST 25/7 PWM 2 1360851 Suitable for standard solar liquids.
Wilo-Yonos PARA ST 25/7 PWM 2 1360854 When connecting the "Regusol" station to a
with 10 bar safety valve flexible pipework (e. g. corrugated metal pipe),
Control range of the flow measuring and regulating device: 7-30 l/min. device.
9 Wilo-Yonos PARA ST 25/7.5 PWM 2 1360852 Controllers and accessories for the operation


page 9.26.
9.14 2017
Solar thermal energy "Regusol ELH-180-RC" Station DN 25

g as "Regusol LH-180" station, but with electronic controller for the connection to the solar circuit.
f With integrated electronic controller for the
c b h
consisting of: control and monitoring of a solar thermal
a) high-efficiency pump plant according to the temperature difference
k a b) ball valve with integrated check valve, principle.
thermometer and connection for safety group These stations are mainly used for hot
j c) ball valve with integrated check valve and thermometer potable water preparation.
l d
d) flow measuring and regulating device with With G 1 male threaded connection for
i isolation and lateral fill and drain ball valve "Regusol" compression fittings to the solar
g) pressure gauge 10 bar For copper and precision steel pipes.
h) fill and drain ball valve Alternatively, compression fittings according to
i) wall mounting device DIN EN 16313 (cone "Euro") of other
j) electronic controller manufactures may also be used.
k) insulation
l) deaerator With the option to connect an expansion tank
Control range of the flow measuring and regulating device: 2 - 15 l/
min. Distance between pipe centres: 100 mm
Pump 180 mm long.
Wilo-Yonos PARA ST 25/7 PWM 2 1360862
Wilo-Yonos PARA ST 25/7 PWM 2 1360864 Continuous operating temperature: 120 C
with 10 bar safety valve Short-term max. starting temperature: 160 C
and controller "Regtronic RC"
with data output (S-bus) Suitable for standard solar liquids.
When connecting the "Regusol" station to a 9

device.


temperature sensor (PT 1000).

2017 9.15
e "Regusol SH-180" Station DN 32 Complete, pre-assembled and leak tested unit

g with safety group for the connection to the solar circuit.
f
With flat sealing male threaded connection G 2
consisting of: to the solar supply and return pipe.
c a b a) high-efficiency pump
b) ball valve with thermometer With the option to connect an expansion tank
c) ball valve with thermometer to the safety group.
a
i d) check valve
e) safety valve 6 bar Distance between pipe centres: 125 mm
h f) outlet G male thread to expansion tank Pump 180 mm long.
d g) pressure gauge 10 bar
h) flow measuring and regulating device Continuous operating temperature: 120 C
i) insulation Short-term max. starting temperature: 160 C
Control range of the flow measuring and regulating device: Suitable for standard solar liquids.
10 - 40 l/min.
Wilo-Stratos PARA 1-9 PWM 2 1368251 of the complete solar plant: from page 9.25

9.16 2017
Solar thermal energy Summary "Regusol X" stations with heat exchanger
Regusol X Stations for the connection of collector and storage cylinder with heat exchanger
Models: Regusol X-Duo Electronically controlled station with heat exchanger for the transmission of the heat of a solar circuit
(primary circuit) to two loading circuits (secondary circuit) activated by a conversion valve.
Regusol X-Uno Electronically controlled heat exchanger system for the transmission of the heat of a solar circuit (primary circuit) to
a loading circuit (secondary circuit).
Installation dimensions: H = 860 mm, W = 500 mm, D = 260 mm
Heat exchanger system Heat exchanger system

Characteristics without conversion function with conversion function
1 loading circuit to 2. loading circuit
Regusol X-Uno 25 Regusol X-Duo 25
Catalogue page 9.19 9.19
Primary side:
Filling and flushing connection x x

Electronic flow transducer x x
Ball valve with check valve, temperature sensor
connection and thermometer inside the handle, x x
with connection for safety group
Safety group with safety valve (6 bar),

pressure gauge, fill and drain ball valve x x
and connection for an expansion tank
Ball valve with check valve, temperature sensor

connection, thermometer inside the handle and x x 9
additional fill and drain valve in the elbow
Plate heat exchanger 25 kW 25 kW
Secondary side:
Vent plug x x
Check valve x x
Three-way conversion valve with actuator x
Ball valve with temperature sensor connection x x
and thermometer inside the handle
Ball valve with temperature sensor connection, thermometer x x

inside the handle and additional fill and drain valve
Safety valve (3 bar) x x

Solar controller with different
programmable loading strategies
target loading of upper part of the storage cylinder x x
active loading section by section
loading of the complete storage cylinder
Insulation with integrated controller x x
2017 9.17
Solar thermal energy "Regusol X" Controller concepts
Regusol X-Uno 25
Heat exchanger capacity 25 kW
Primary circuit:
1 circuit for the connection of the
collector fields
R1
Secondary circuit:
storage cylinder for simple operation
VFD
Storage cylinder connection for simple operation
Regusol X-Duo 25
Primary circuit:
collector fields
Secondary circuit:
2 circuits for the connection of the
storage cylinder for loading section by section
VFD
Storage cylinder connection for loading section by section
Regusol X-Duo 25
Primary circuit:
collector fields
9 VFD
Secondary circuit:
2 circuits but with loading operation
of 2 separate storage cylinders
Storage cylinder connection for loading operation of 2 separate storage cylinders
Regusol X-Uno 25
with Regusol X supplementary set
Primary circuit:
collector fields
Secondary circuit:
VFD storage cylinder for simple operation
For 2 collector fields with storage cylinder connection for simple operation
Regusol X-Duo 25
Primary circuit:
collector fields
Secondary circuit:
VFD
storage cylinder for loading section by section
For 2 collector fields for storage cylinder connection for loading section by section
Regusol X-Duo 25
Primary circuit:
collector fields
VFD
Secondary circuit:
2 circuits but with loading operation
of 2 separate storage cylinders
For 2 collector fields for storage cylinder connection for loading operation of 2 separate storage cylinders
9.18 2017
"Regusol X-Uno 25" with heat exchanger
Solar thermal energy "Regusol X-Duo 25" with heat exchanger
"Regusol X-Uno 25" with heat exchanger Product assembly with electronic controller,
Station with heat exchanger heat exchanger and three-way conversion
1 solar circuit connection valve ("Regusol X-Duo 25" only) for second
with electronic controller "Regtronic RX" loading circuit for the controlled transmission
with full graphic display and data output (S-bus) of the heat of the solar circuit (primary circuit)
to a buffer storage cylinder (secondary circuit);
Capacity: 25 kW for instance for existing storage cylinders
Number of heat exchanger plates: 30 without direct solar connection.
Connections: The three-way valve integrated in the supply

Primary side: G 1 "Regusol" compression fittings pipe of the secondary circuit ("Regusol X-Duo
Secondary side: G 1 flat sealing 25" only) allows for the conversion to an
additional loading circuit running in parallel, for
kvs = 2.4 m/h primary side instance for the loading section by section of
(with a glycol proportion of 40% in the solar liquid) the storage cylinder or the thermal loading of a
kvs = 3.6 m/h secondary side second storage cylinder.
with Wilo Yonos high-efficiency pumps 1361060 Primary circuit: up to PN 10 and 120
Primary side: ST PWM 15/7 Starting temperature: 160 C
Secondary side: RS PWM 15/7 Secondary circuit: up to PN 6 and 120 C
constant operation
The soldered plate heat exchanger complies

with the requirements of the European
Pressure Equipment Directive (PED).
Due to turbulent flow conditions, an excellent
self-cleaning effect is produced and thus, a
contamination is avoided.
"Regusol X-Duo 25" with heat exchanger The leak tested components of the heat 9
Station with heat exchanger exchanger system are pre-assembled on a
1 solar circuit connection/ board.
2 loading circuit connections The controller is wired with the internal electric
with electronic controller "Regtronic RX" components and features the following
with full graphic display and data output (S-bus) connections:
Output for solar circuit pump
Capacity: 25 kW Output for loading pump
Number of heat exchanger plates: 30 Output for three-way conversion valve
("Regusol X-Duo 25" only)
Connections: Apart from the mentioned outputs, the
Primary side: G 1 "Regusol" compression fittings "Regtronic RX" features a data bus (S-bus) for
Secondary side: G 1 flat sealing the connection to the data logger "CS-BS".
Temperature inputs for:
kvs = 2.4 m/h primary side Collector, heat exchanger entry point - primary
(with a glycol proportion of 40% in the solar liquid) side, heat exchanger exit point - secondary
kvs = 3.2 m/h secondary side side, 3 temperature inputs for storage cylinder
with loading operation section by section,
interfaces for electronic flow transducer.
with Wilo Yonos high-efficiency pumps 1361050
Plain text is clearly shown on the display of the
Primary side: ST PWM 15/7
controller.
Secondary side: RS PWM 15/7
The heat exchanger system is completely
insulated.
The indicated capacity for the heat
transmission is valid for a usable global solar
radiation of 500 W/m.
For the extension of a "Regusol X" station with high-efficiency The heat transmission depends on:
pump for the interconnection and regulation of different collector - the reached flow temperature and the
fields (e.g. east/west), see supplementary set "Regusol X": volume flow of the primary circuit
page 9.35 - the flow temperature difference between
the primary and secondary circuit
- the required flow temperature and the
volume flow of the secondary circuit.
2017 9.19
Solar thermal energy "Regusol X" Stations with heat exchanger
The stations described on the preceding

pages consist of two connection levels:
1. Primary circuit (X-Uno 25 and X-Duo 25)

a lling and ushing connection
b electronic volume ow sensor
c pump (solar circuit)
d ball valve, temperature sensor connection
and thermometer inside handle,
with connection for safety group
e safety group with safety valve (6 bar),
pressure gauge, ll and drain ball valve
and connection for an expansion tank
f ball valve with check valve, temperature
sensor connection, thermometer inside
handle and additional ll and drain valve
in the elbow
g plate heat exchanger
o insulation with integrated controller
p solar controller with different
Front level, solar circuit programmable loading strategies
(primary circuit X-Uno 25 and X-Duo 25) target loading of upper part of the storage cylinder
active loading section by section
loading of the complete storage cylinder
2.Secondary circuit (X-Uno 25)

h vent plug
i pump (loading circuit)
9 j check valve
l ball valve with temperature sensor connection
and thermometer inside handle
m ball valve with temperature sensor
connection, thermometer inside
handle and additional ll and drain valve
n safety valve (3 bar)
o insulation
Dimensions (outer dimensions insulation)

width: approx. 500 mm
depth: approx. 260 mm
height: approx. 860 mm
Back level, loading circuit
(secondary circuit X-Uno 25)
3. Secondary circuit (X-Duo 25)

h vent plug
i pump (loading circuit)
j check valve
k three-way conversion valve with actuator
l ball valve with temperature sensor connection
and thermometer inside handle
m ball valve with temperature sensor
connection, thermometer inside handle
and additional ll and drain valve
n safety valve (3 bar)
o insulation
Dimensions (outer dimensions insulation)

width: approx. 500 mm
depth: approx. 260 mm
Back level, loading circuit height: approx. 860 mm
(secondary circuit X-Duo 25)
Regusol Extension set 2S: page 9.35
9.20 2017
Solar thermal energy "Regtronic" - Electronic controllers, summary
Controller Regtronic RC Regtronic RC-P Regtronic RM
Item no. 1369549 1369551 1369555
Application Solar storage cylinder Solar storage cylinder Solar storage cylinder
loading via a tube heat loading via a tube heat loading via a tube heat
exchanger located inside exchanger located inside exchanger located inside
the storage cylinder the storage cylinder the storage cylinder
Control with heat exchanger Control with heat exchanger Control with heat exchanger
Activation of high-efficiency Activation of high-efficiency Freely programmable outputs
pumps by PWM or 0-10 V signal pumps by PWM or 0-10 V signal Heating systems
Automatic functional control Additional functions, e.g. Activation of high-efficiency
according to VDI guideline 2169 support of a heating pumps by PWM or 0-10 V signal
system, differential control,
control of a circulation pipe 2 variable temperature
or a wood burning stove circuits
Automatic functional control
according to VDI guideline 2169
Energy measurement (for instance

X X
using an electronic flow sensor)
Number of inputs (PT 1000) 4 4 12

Flow sensor (VFS) 1 2
Flow sensor (VFD) 2
Pulse input V40 1 1
Number of outputs 3 4 14
Speed controlled pump output

(standard pump)
2 3 13
9
Speed controlled pump output
2 2 4
(high-efficiency pump)
Data output (S-bus) for connection

X X X
to the Datalog CS-BS-1 / CS-BS-6
Integrated in the stations Regusol ELH-RC Regusol ELH-RC-P Regucor WHS
2017 9.21
Solar thermal energy "Regtronic" - Electronic controllers, pipework configurations, summary
The Oventrop controllers allow for a number of possible pipework configurations. Amongst others, functions like return temperature increase,
boiler activation, circulation function, threshold function as well as heating and cooling function can be easily realised.
The below mentioned pipework configurations can be realised with the Oventrop controllers.
Regtronic Regtronic Regtronic

Pipework configuration
RC RC-P RM
X X X
X X X
X X X
X X
9
X X X
X X X
X X
X X X
X X
X X X
X X X
9.22 2017

RC RC-P RM
X X
X X
X X
X X
2017 9.23

RC RC-P RM
X X
X X
VFD
9.24 2017
Solar thermal energy "Regtronic" - Electronic controllers
"Regtronic" - Electronic controllers
"Regtronic RC" Simple solar controller for wall attachment for

4 inputs PT 1000, PT 500 or KTY the control of a solar plant with one collector
1 pulse input and one (maximum of 2) storage clyinder.
3 outputs, 1 is a volt free relay The controller controls two PWM outputs.
2 PWM outputs for speed regulated This controller is mainly used for the operation
high-efficiency pump control of small and medium-sized solar plants and
Data output S-bus heating systems.
10 selectable basic systems As the first controller in its class, the
Automatic functional control according to VDI 2169 "Regtronic RC" allows the automatic
With 1 collector sensor and 3 storage cylinder sensors functional control according to the VDI
directive 2169.
1369549
"Regtronic S-bus" When combined with the interface adapter

Interface adapter for high-efficiency pumps "Regtronic S-bus", standard solar controllers
can be used for the speed control of high-
1369531 efficiency pumps.
Depending on the pump type, the control
signal can be switched from PWM to 0-10 V.
"Regtronic PSW" Signal converter for the conversion of an

Signal converter for PWM/0 - 10 V pump control asynchronous signal to a high-efficiency pump
(high-efficiency pumps) control signal (PWM or 0 - 10 V)
1369532
9
"Regtronic RC-P" Flexible solar controller for wall attachment for

4 inputs for PT 1000, PT 500 or KTY the control of complex solar plants.
4 outputs, 1 is a volt free relay Apart from the operation of solar plants for hot
1 analogue input Grundfos Direct SensorsTM potable water preparation, this controller is
1 input flow rotor mainly used for the realisation of additional
1 pulse input V 40 (convertible to PT 1000, PT 500 or KTY) functions such as:
2 PWM outputs
Data output S-bus Zone loading
4 solar basic systems, each with up to 3 hydraulic variants Support of the heating system
Automatic functional control according to VDI 2169 Control of a circulation pipe
Vacation function
1369551
The controller is preloaded with 27 pipework
configurations which allow for the control of the
majority of common pipework configurations.
The "Regtronic RC-P" allows the automatic
functional control according to the VDI
directive 2169.
2017 9.25
Solar thermal energy "Regtronic" - Electronic controllers
"Regtronic RM" The system controller "Regtronic RM" for wall

12 inputs PT 1000, PT 500 or KTY attachment has 14 relay outputs (13 speed
3 pulse inputs controlled solid-state relays and 1 volt free
2 analogue inputs Grundfos Direct SensorsTM relay) and 4 PWM outputs for the speed control
2 digital inputs Grundfos Direct SensorsTM of high-efficiency pumps which are convertible
14 outputs to the output of a 0-10 V signal.
4 PWM outputs (convertible to 0-10 V)
Data output S-bus The controller "Regtronic RM" controls solar
plants with East-West roof orientation and
With 2 collector sensors and 6 storage cylinder sensors. several storage cylinders as well as weather
The outdoor sensor is not included. guided variable / constant temperature heating
circuits.
Solar system controller with full graphic display for use in solar and
heating systems. Control of weather guided heating circuits. Preloaded function blocks simplify the system
Operating current 100-240 V. parameterization and thus facilitate an
integration of various heat generators (e. g. oil,
1369555 gas or solid fuel boilers).
ErP classication Regtronic RM Different optional functions such as storage

cylinder loading section by section, heat
Boiler control
exchange, heat demand, boiler loading, solid
Required modu-
Item no. Controller
accessories lating On/Off
ErP % Class fuel boiler, mixing valve control, measurement
(0-10 V) of heat consumption, tube collector function,
drain back option, thermostat function, T-
X 2.0 II
regulation, thermal disinfection, circulation and
X 1.5 III further functions may be activated via the
1x room temperature intuitive user guidance.
X 4.0 VI
9 1369555 Regtronic RM sensor 1152095
1x room temperature X 3.5 VII Interfaces: S-bus for the connection to the data
sensor 1152095 logger "CS-BS".
3x room temperature X 5.0 VIII SD-card slot for data recording and
sensor 1152095 transmission of set values as well as updating
of the firmware.
Up to 5 extension modules "Regtronic EM" can

be connected to the "Regtronic RM". Thus,
there is a total number of 39 relay outputs for
individual pipework configurations.
Controller location For upgrading the stations

for "Regtronic RC/ RC-P" "Regusol SH/LH" DN 25 manufactured
since 2015 with a "Regtronic RC/ RC-P"
1369553 controller.


L = 300 cm
L = 200 cm.
Sensor socket The weatherproof socket protects the collector

sensor from electric surge and lightning.
with surge protection 1369591
9.26 2017
Solar thermal energy "Regumat" Heat exchangers
"Regumat" Heat exchangers Modular complement to the boiler connection

High-capacity plate heat exchanger systems "Regumat 130/180" DN 25 with
a distance of 125 mm between pipe centres.
with connection fitting System with plate heat exchanger for the
separation of different product assemblies and
14 plates up to 14 kW 1351596 individual components for:
30 plates up to 28 kW 1351696 - surface and underfloor heating and cooling
- storage cylinder loading
The performance dates are determined by the fixed default values - fresh water loading
in the primary circuit (70/50 C) and secondary circuit (40/50 C). Connection distance: 125 mm
One port 2 x pump flange with collar nut G 1,
one port 2 x G 1 male thread with additional
lateral connection facilities, including insulation.
Tailpipe sets are available separately: page

6.67


30 plates up to about 55 kW 1351791 As replacement for "Regusol X-25" and
"Regumaq".
The performance dates are determined by the fixed default values 9

Thermal insulation made of expanded polystyrene

2017 9.27
Solar thermal energy 9.b Accessories for "Regusol" stations within the collector circuit
Page

Content
"Regusol" Compression fittings 9.31
"Regusol" Compression fittings with reinforcing sleeves 9.31
Tailpipe sets DN 32 9.32
Tailpipe sets DN 20 for "Regusol X" and "Regumaq X/XZ" stations 9.32
Accessories 9.32
2017 9.29
Solar thermal energy "Hydrocontrol STR" Double regulating and commissioning valves PN 25
Packing
unit
"Hydrocontrol STR" Double regulating and commissioning valves Application:

PN 25 Solar plants with closed circuits, for operation
(solar, threaded connection, bronze) with non-aggressive, harmeless fluids (e. g.
both ports compression connection for water or suitable water and glycol mixtures
compression fittings "Regusol" (DN 25) according to VDI 2035/NORM 5195).
DN 20 LF (10) 1.04 1369050 Measuring method:

DN 20 MF (10) 2.60 1369055 Determination of the flow rate by measuring the
differential pressure via the metering station.
both ports female thread according to EN 10226 Description "Hydrcontrol STR":

DN 20 LF (10) 1.04 1369062 Operating temperature ts: -20 C up to +200 C
DN 20 MF (10) 2.60 1369065 Especially for solar plants.
As the valve has no isolation function, a

miminum flow rate is guaranteed.
Is used for the hydronic balancing of collector
fields.

9
Accessories:
"Regusol" compression fittings
9.30 2017
"Regusol" Compression fittings
Solar thermal energy "Regusol" Compression fittings with reinforcing sleeves
Packing
unit
"Regusol" Compression fittings
DN 20 For the connection of the solar circuit to

brass "Regusol" valves and stations DN 20.
for copper and precision steel pipe, Attention: When installing copper pipes
collar nut G , collar nut unplated or precision steel pipes with a wall thickness
of 1 mm, it is necessary to use
Set = 4 compression fittings reinforcing sleeves for the additional
12 mm (25) 1367393 thickness exceed 1 mm, please contact the
15 mm (25) 1367395 pipe manufacturer. Reinforcing sleeves
16 mm (25) 1367396 for wall thickness = 1 mm: page 9.32
18 mm (25) 1367397
"Regusol" Compression fittings with reinforcing sleeves For the connection of the solar circuit to
"Regusol" valves and "Regusol" stations
DN 25 DN 25.
brass
for copper and precision steel pipe,

collar nut G 1, collar nut unplated
Set 1 = 1 compression fitting
12 mm (10) 1367573
15 mm (10) 1367575 9
16 mm (10) 1367576
18 mm (10) 1367577
22 mm (10) 1367579
Set 2 = 2 compression fittings
12 mm (10) 1367583
15 mm (10) 1367585
16 mm (10) 1367586
18 mm (10) 1367587
22 mm (10) 1367589
Set 3 = 4 compression fittings
12 mm (10) 1367593
15 mm (10) 1367595
16 mm (10) 1367596
18 mm (10) 1367597
22 mm (10) 1367599
2017 9.31
Solar thermal energy Accessories
Packing
unit
Tailpipe sets DN 32 For the connection of the solar circuit to

"Regusol" stations DN 32.

2-fold: 1350476
4-fold: 1350477

15 mm (50) 1029654
18 mm (50) 1029656 the pipe.
22 mm (50) 1029657
Tailpipe sets DN 20 for "Regusol X" and "Regumaq X/XZ" stations Are required for the connection of the
To be ordered separately: "Regusol X" station to the loading circuit.
Tailpipe sets 3-fold with collar nut and ring gasket
9 Use "Regusol" compression fittings for the
Solder tailpipes 22 mm 1367465 connection of the "Regusol X" station to the
solar circuit.
Also suitable for "Regumaq X/XZ-30" and

acccessories.
Male threaded tailpipes R 1367468
Accessories
"Regusol" Connection nipple For the connection of collector pipes

(e. g. copper pipes).
2 x G 1 with cone (20) 1369089
Locking shackle For use of the product assemblies "Regusol"

with flexible pipe (e. g. corrugated pipe).
(25) 1369090 Combined with the wall mounting device
supplied with the product assemblies
"Regusol".
Wall mounting device
for solar stations "Regusol 130/180" 1369080

(1 piece)
for "Regusol" pump circuit 1369081
"Regusol" - Connection set Connection fitting for the connection of the

flexible stainless steel corrugated pipe "2 in 2"
Collar nut G 1 and (10) 1369085 DN 16 with G collar nut to "Regusol" stations
G male threaded tailpipe DN 25.
9.32 2017
Packing
unit
Flat sealing insert For the conversion of a tapered (metal to metal

sealing) connection to a flat sealing connection.
for "Regusol" stations DN 20 (100) 1369086
for "Regusol" stations DN 25 1659990
"Regusol SG" Safety group
manufactured up to 2015
with safety valve 6 bar 1364197

manufactured since 2015
"Regusol SB" Safety block T-piece with safety valve for the additional
protection of the solar circuit against excess
with safety valve 6 bar 1364140 pressure. Installation in the solar return pipe
between the storage cylinder and the solar
station.
"Regusol" Filling and flushing device Isolating ball valve with lateral connection for
G 1 male thread x G 1 male thread 1363051

filling and flushing pipes to be installed at the
lowest point of the solar circuit.
9
"Regusol" Filling pump

manual filling pump,
with hose connection,
with ball valves on suction and pressure side
1364250
Connection set for "Regusol" filling pump Consisting of:

- wall bracket for filling pump with
1364290 fixing material
- flexible hose 300 mm long
Application up to 150 C.
Check valve Check valves avoid a gravity circulation if the

pump is switched off.
G1xG1 (10) 1364199 Opening pressure: 20 mbar
Short-term starting temperature: 160 C
"Flow Stop Solar" Check valve Both ports G 1 for "Regusol" compression
connection.
G1xG1 (10) 1364186 Opening pressure: 20 mbar
2017 9.33
Flow measuring and regulating device G 1 collar nut x G 1 for "Regusol"

with isolation compression fitting
L/MIN
15
12
9
7
1-6 l/min 1364160 Item no. 1364163:
2-15 l/min. 1364161 G 1 collar nut x G for "Regusol"
5
2
7-30 l/min. 1364162 compression fitting

2-14 l/min. 1364163
as replacement for old model "Regusol 180"

(manufactured up to 2005, flat insulation)
1-6 l/min. 1364149

2-14 l/min. 1364151
Electronic flow sensor VFS The electronic flow sensors may only be used
with connecting cable in combination with a controller which is able
to evaluate the signal of the Grundfos sensor.
2-40 l/min. 1364170
The electronic flow sensor VFD is used in the
"Regumaq X" and "Regumaq XZ" stations,
item no. 1381030/32/35/37, for the recognition
and determination of the volume flow.
40
20
60
80
100
"Regusol" Venting circuit DN 25 Both ports G 1 for "Regusol" compression
for replacement at existing fittings: page 9.31
0
AUF
C 120
ZU
9 "Regusol" stations
consisting of:
ball valve with integrated check valve,
thermometer and deaerator
manufactured up to 2015
for "Regusol-130" 1364190

manufactured since 2015

For the separate connection to the collector

"Regusol" Vent pot 1364260 supply pipe.
Both ports G 1 for "Regusol" compression
fittings: page 9.31
9.34 2017
"Regusol" Pump ball valves DN 25
with check valve 20 mbar opening pressure

and connection facility for a "Regusol" safety group
manufactued up to 2015 1364198

manufactured since 2015 1364187
Thermometer
for "Regusol" stations manufactured up to 2015

Display range: 0 - 120 C
1364195
for "Regusol" stations manufactured since 2015
red 1364188
blue 1364189
Pressure gauge
for "Regusol" stations 1364196

Display range: 0 - 10 bar
"Regusol X" Supplementary set For the extension of a Regusol X station
1361092
with high-efficiency pump for the inter-
connection and regulation of different
9
collector fields (e. g. east-west).
2017 9.35
Circulation pumps 130 mm
Solar thermal energy Circulation pumps 180 mm
Circulation pumps 130 mm Are only supplied as replacement for the

"Regusol" stations.
Connection thread G 1 When using a PWM pump, is is to be observed
DN 25, PN 10, 95 C that the used controller provides a PWM signal
that matches the pump type. If this is not the
Grundfos Solar PM2 25-105 PWM 1360580 case, the signal converter "Regtronic PSW"
Wilo-Yonos PARA ST 25/7 PWM 2 1360588 (item no. 1369532) can be alternatively used.
The signal converter allows for the connection

of speed controlled high-efficiency pumps with
PWM or 0 - 10 V control input to controllers
without appropriate output.
Grundfos UPM 3 Solar 25-75 PWM C 130 1360589* The circulation pump Grundfos UPM 3 can be
operated without an external PWM signal
(control type volume flow = constant).
9
Connection thread G 1
Wilo-Yonos PARA ST 15-7 PWM2 1369008

DN 25, PN 10, 110 C
for the primary circuit (collector circuit)
Wilo-Yonos PARA 15-7 PWM2 1389008 Only supplied as replacement for the
DN 15, PN 10, 95 C stations "Regumaq X-30/XZ-30" and
for the secondary circuit (storage cylinder circuit) "Regusol" "Regusol X-Uno/Duo 25".
or the primary circuit (storage cylinder circuit) "Regumaq"
Circulation pumps 180 mm Are only supplied as replacement for the

"Regusol" stations.
Connection thread G 1 When using a PWM pump, is is to be observed
multi-speed control that the used controller provides a PWM signal
DN 25, PN 10, 110 C that matches the pump type. If this is not the
case, the signal converter "Regtronic PSW"
Grundfos UPS 26/60 1367251 (item no. 1369532) can be alternatively used.
Wilo-Yonos PARA ST 25/7 PWM 2 1367258
The signal converter allows for the connection
of speed controlled high-efficiency pumps with
PWM or 0 - 10 V control input to controllers
without appropriate output.
Grundfos UPM 3 Solar 25-75 PWM C 180 1367259* The circulation pump Grundfos UPM 3 can be
operated without an external PWM signal
(control type volume flow = constant).
"Regtronic PSW" Signal converter for the conversion of an

Signal converter for PWM/0 - 10 V pump control asynchronous signal to a high-efficiency pump
(high-efficiency pumps) control signal (PWM or 0 - 10 V)
1369532

Circulation pumps 130 mm
Solar thermal energy Circulation pumps 180 mm
Power cord Cable 2 m long.
for circulation pumps Grundfos UPM 3 1358149*
Signal connection cable
for Grundfos UPM 3 and 1358180*

Wilo-Yonos PARA

Solar thermal energy 9.c "OKP" and "OKF" Collectors and accessories
Page

Content
"OKP" Tube collectors 9.40
"OKP" Vertical freestanding installation 9.41
OKP Vertical freestanding / facade installation 9.41
"OKP" Roof hooks made of stainless steel 9.41
Accessories 9.42
"OKF" Flat-plate collectors 9.43
"OKF" Rooftop installation 9.44
"OKF-MQ25" Rooftop installation 9.44
"OKF" Vertical roof integration side by side 9.45
"OKF-CK22/CS22" Connection options 9.46
"OKF" Vertical freestanding installation 9.45
"OKF-MQ25" Freestanding installation 9.47
"OKF" Gravel plate set 9.48
"OKF" Roof hooks made of galvanised steel 9.49
Carrying handles for "OKF" flat-plate collectors 9.49
Accessories for flat-plate collector "OKF-MQ25" 9.50
9
2017 9.39
Solar thermal energy "OKP" Tube collectors
"OKP" Tube collectors The "OKP" tube collector is a heat pipe tube
for solar heating of collector. Due to its hydronic features, the
domestic water collector can be fixed to the building (pitched
heating circuit or flat roof, facade or detached) with an
swimming pool water inclination of the axis between 15 and 75 .
The tube collector can be used for heating of
e b e
"OKP-10" Tube collector potable or swimming pool water, solar support
Set 1: of the heating system and the production of
consisting of: process heat.
Due to the high-selective absorber surface
a a) 10 vacuum tubes area, a high solar share is achieved.
b) collector The vacuum inside the tube guarantees
c) tube bracket (foot rail) maximum insulation. The high quality corrosion
d) set of side rails (pre-assembled set of side rails resistant materials ensure a long service life of
for an easy and quick installation) the "OKP" tube collector.
e) solar supply and return with compression connection 4 x 22 mm
c With no air inside the vacuum which may
Dimensions: transport the heat from the absorber surface
Gross surface area: 1.70 m (L = 1.995 m, W = 0.852 m) area to its surroundings, a high efficiency is
Aperture surface area: 0.94 m achieved even with low radiation and low
Absorber surface area: 0.81 m outside temperatures.
Weight: 42 kg
d The heat pipe inside the glass tube is a quick
Roof fixing devices are to be ordered separately: page 9.41 acting heat transfer system working efficiently
even with diffused radiation.
1361230
The heat is transmitted from the absorber to
the heat pipe via an aluminium sheet. This way,
9 the liquid inside the heat pipe evaporates and
the steam rises into the condenser. The heat is
transmitted to the passing fluid via the double
tube heat exchanger (collector) in which the
condenser is located. The steam condenses
and flows back again inside the heat pipe and
the procedure repeats itself.
To maintain this permanent heat transport, the

e b e "OKP-20" Tube collector
miminum pitch of the roof must be observed
Set 2:
when installing the tubes. As the heat pipe is a
consisting of:
closed system, it is maintenance-free.
The connection between the condenser and
a) 20 vacuum tubes
a the collector is a "dry" connection (immersion
b) collector
pocket). Due to this system separation,
c) tube bracket (foot rail)
individual tubes can be replaced without the
d) set of side rails (pre-assembled set of side rails
necessity to drain the collector circuit.
for an easy and quick installation)
Installation can be carried out by one person.
e) solar supply and return with compression connection 4 x 22 mm
c The collector OKP is tested
Dimensions: to DIN EN 12975-1 standard
Gross surface area: 3.25 m (L = 1.995 m, W = 1.632 m) and is certified according to
Aperture surface area: 1.88 m Solar Keymark.
Absorber surface area: 1.62 m Award:
Weight: 78 kg German Designer Club
d Good Design 08
Roof fixing devices are to be ordered separately: page 9.41
1361231
9.40 2017
"OKP" Vertical freestanding installation
OKP Vertical freestanding / facade installation
Solar thermal energy "OKP" Roof hooks made of stainless steel
"OKP" Vertical freestanding installation Pre-assembled hinged mounting triangles for

flexible setting of the inclination angle (30 up
Basic set "OKP-10" to 60 ) for vertical flat roof installation of an
"OKP" collector.
1361270
Basic set "OKP-20"
1361275
Extension set "OKP-10" A basic set is required for the installation

of an extension set. Two collector couplings
1361271 are included.
Extension set "OKP-20"
1361276
OKP Vertical freestanding / facade installation The pre-assembled mounting set can be used 9
for the tube collectors OKP-10 and
Individual set 15 OKP-20.
for the installation of one "OKP" tube collector
Possible types of installation:
1. Installation on a flat roof:

1361278 The minimum axis inclination of the collector of
15 will be achieved by this.
2. Installation on the facade:

The tube collector can be installed directly on
the facade with an angle of 75 (see
illustration).
"OKP" Roof hooks made of stainless steel Roof hooks to be screwed to the side rails.
Roof hook reinforced against torsion with high
for pan tiled roofs resilience. The side rails of the vacuum tube
collector can be easily screwed to the roof
Basic set = 4 roof hooks 1361260 hooks from the side. The maximum permissible
span of the roof hooks depends on the snow
and wind load stressing zone and is related to
each individual collector. Calculations
according to DIN 1055-4 and DIN 1055-5.
Please contact Oventrop for information on
for pan tiled roofs, for high snow load stressing
higher capacities.
Basic set = 4 roof hooks 1361262 A suitable fixing base which can absorb the
emerging forces (weight, wind and snow load
stressing) is paramount for correct usage.
for pan tiled roofs, adjustable height
Basic set = 4 roof hooks 1361266
for slate and plain tiled roofs
2017 9.41
Accessories
Spare tube for tube collectors OKP Spare tube consisting of:
Vacuum tube with heat conducting
L = 1800 mm; D = 58 mm 1361290 steel sheet and heat pipe.
Cover sheet For the connection of two modules (collector

housing).
for "OKP" tube collectors 1361625
for covering the junction
between two tube collectors
Heat transfer liquid Ready-mixed heat transfer liquid especially

ready-mixed liquid designed for use in solar plants with a high
for "OKP" and "OKF" collectors thermal load (vacuum tube collectors).
Heat transfer liquid for a long term and reliable
Content of canister 10 l 1361690 protection against corrosion with a frost
Content of canister 25 l 1361691 protection up to -28 C. Available in 10 l or 25 l
plastic disposable canisters.
"Regusol" Flushing and filling station The "Regusol" flushing and filling station with a
tank content of 30 l is used for flushing and
with connection hose and 1364240 filling of solar thermal plants and heating
fill and drain cock systems.
9 Pump output: 1000 W (230 V, 50 Hz)
Pump head: 42 m
Pump capacity: 5-47 l/min.
Pumped fluid: Water, water-glycol, cleaning
agents for solar plants
9.42 2017
Solar thermal energy "OKF" Flat-plate collectors
Packing
unit
"OKF" Flat-plate collectors "OKF" flat-plate collector for use on pitched

for solar heating of roofs and on level surfaces on freestanding
domestic water installations.
heating circuit The laser welded aluminium absorber and high
swimming pool water quality materials as mineral wool of the thermal
conductivity group 040 guarantee a high
"OKF-CK22" Flat-plate collector efficiency. "OKF" flat-plate collectors can be
consisting of: used for heating of potable and swimming pool
a) antireflective glass water and solar support of the heating system.
b) supply and return connection with plug-in connection 18 The flat-plate collectors "OKF-CK22" and
c) aluminium collector frame with insulation "OKF-CS22" can be mounted horizontally or
vertically and are suitable for rooftop
Also available with black outer frame on request. installation or freestanding installation (flat roof
installation).
Dimensions: A vertical roof integration is possible with
Gross surface area: 2.25 m "OKF-CK22" only. The "OKF-MQ25" can only
(L = 1933 mm, W = 1163 mm, H = 110 mm) be used for horizontal rooftop or freestanding
Aperture surface area: 2.01 m installation.
Weight: 37 kg As for the flat-plate collector "OKF-MQ25", the
serpentine patterned absorber made of
1361340 aluminium heat conducting steel sheet and
copper pipe is connected to the solar circuit via
two collector connections 22 mm with
"OKF-CS22" Flat-plate collector gripper clamps.
consisting of: The flat-plate collectors are connected with
a) transparent solar safety glass one another using flexible stainless steel
b) supply and return connection with plug-in connection 18 corrugated pipes which also serve to
compensate any thermal conditional
c) aluminium collector frame with insulation
expansions. 9
Dimensions: As for the flat-plate collector "OKF-MQ25", a
Gross surface area: 2.25 m longer field compensator has to be used after
(L = 1933 mm, W = 1163 mm, H = 80 mm) the 6th collector.
Aperture surface area: 2.01 m
Weight: 33 kg The collector is tested
according to DIN EN 12975-1
1361345 and certified according to
Solar Keymark.
"OKF-MQ25" Flat-plate collector
consisting of: Further information and ErP data:
a) highly transparent solar safety glass
b) collector connection for gripper clamp 22 mm
c) aluminium collector frame with insulation
Dimensions:
Gross surface area: 2.61 m
(L = 2151 mm, W = 1215 mm, H = 80 mm) Large solar plant: page 17.15.
Aperature surface area: 2.37 m
Weight: 44 kg
(11) 1361440
2017 9.43
"OKF" Rooftop installation
Solar thermal energy "OKF-MQ25" Rooftop installation
"OKF" Rooftop installation Pre-assembled aluminium mounting rails for

for flat-plate collectors "OKF-CK22" and "OKF-CS22" vertical or horizontal rooftop installation of
two collectors with a minimum axis
Basic set inclination of 10-85. A collector coupling
for the installation of two collectors made of stainless steel with UV-resistant
insulation is included.
1361380 The collector connection pipes for roof conduit
are to be ordered separately.
Basic set: 2 collectors-stacked

horizontal installation
Basic set: 2 collectors

vertical installation side by side
Extension set A basic set is required for the installation of an

for each additional collector for stacked extension set. A collector coupling made of
9 horizontal installation or vertical installation stainless steel with UV-resistant insulation is
side by side included.
1361381
Individual set For vertical or horizontal installation of one

for the installation of one collector collector (e.g. horizontal installation from left
to right).
1361385 The collector connection pipes for roof
conduit are to be ordered separately.
"OKF-CK22/OKF-CS 22" Collector connection pipe Two collector connection pipes with plug-in
with plug-in connection 18 connection 18, approx. length 940 mm
(only for item no. 1361340 and 1361345)
Basic set 1361288
for the connection of the first collector
to the supply and return pipe of the solar station
"OKF-MQ25" Rooftop installation
Basic set 1361480 Pre-assembled aluminium mounting rails for

for the installation of one collector horizontal rooftop installation of one collector
with a minimum roof pitch of 15 - 75. Two
roof conduits with connection set are included.
Extension set 1361481 A basic set is required for the installation of an

for each additional collector for horizontal installation side by side extension set. A collector coupling with
connection set is included.
9.44 2017
"OKF" Vertical roof integration side by side
Solar thermal energy "OKF" Vertical freestanding installation
"OKF" Vertical roof integration side by side For roof integration with peripheral frame
for flat-plate collector "OKF-CK22" for roof covering made of anthracite aluminium
for vertical installation with a minimum axis
For pan tiled roofs inclination of 27 85 .
A collector coupling made of stainless steel
Basic set with UV-resistant insulation is included. The
for the installation of two collectors collector connection pipes for roof conduit
are to be ordered separately.
1361391 Complete with screws, nails, sealing tapes
and silicone T-profile.

for each additional collector extension set.
1361392
For plain tile and slate roofs
Basic set
for the installation of two collectors
1361393

for each additional collector extension set.
1361394
9
"OKF" Vertical freestanding installation
for flat-plate collectors "OKF-CK22" and "OKF-CS22"
Basic set for vertical installation Pre-assembled hinged mounting triangles

for the installation of one collector for flexible setting of the inclination angle
(37 up to 50) for vertical flat roof
1361387 installation of an "OKF" collector.
Extension set for vertical installation A basic set is required for the installation of an
for each additional collector extension set. A collector coupling made of
stainless steel with UV-resistant insulation is
1361388 included.
Individual set for horizontal installation Due to the positioning of the collector supply
for the installation of one collector and return pipe connections (see page 9.43),
horizontal installation has to be carried out as
1361389 individual unit.
Installation set 1361289 Aluminium clamping brackets required for

consisting of: fixing the mounting triangles (e. g. on truss or
- 8 aluminium clamping brackets concrete blocks).
- 8 screws 8 x 80 and washers
- 8 dowels S 12
2017 9.45
Solar thermal energy "OKF-CK22/CS22" Connection options
OKF-CK22/CS22 - Connection alternatives
Connection with OV-Flex ST Connection with copper pipe: Connection with OV-Flex ST Connection with copper pipe:
stainless steel corrugated pipe: stainless steel corrugated pipe:
Flat-plate collectors with plug-in Flat-plate collectors with plug-in Flat-plate collectors with plug-in Flat-plate collectors with plug-in
connection connection connection connection
OKF-CK22, item no. 1361340 OKF-CK22, item no. 1361340 OKF-CK22, item no. 1361340 OKF-CK22, item no. 1361340
OKF-CS22, item no. 1361345 OKF-CS22, item no. 1361345 OKF-CS22, item no. 1361345 OKF-CS22, item no. 1361345
(page 9.43) (page 9.43) (page 9.43) (page 9.43)
Collector connection pipe Collector connection pipe

with plug-in connection 18 mm with plug-in connection 18 mm
item no. 1361288 (page 9.44) item no. 1361288 (page 9.44)
Regusol Compression fitting Regusol Compression fitting Regusol Compression fitting Regusol Compression fitting
9 DN 25, 18 mm, G 1,
item no. 1367577/87 (page 9.31)
DN 25, 18 mm, G 1, item no.
1367577/87 (page 9.31)
DN 25, 18 mm, G 1,
item no. 1367577/87 (page 9.31)
DN 25, 18 mm, G 1,
item no. 1367577/87 (page 9.31)
Connection fitting Connection fitting

Connection nipple Connection nipple
DN 16 G 34 x G 1, item no. 1369076 DN 16 G 34 x G 1, item no. 1369076
G1xG1 G1xG1
DN 20 G 1 x G 1, item no. 1369078 DN 20 G 1 x G 1, item no. 1369078
item no. 136908 (page 9.32) item no. 1369089 (page 9.32)
(page 9.59) (page 9.59)
Regusol Regusol
Compression fitting Compression fitting
DN 25, G 1 DN 25, G 1
item no. 1367577/87 (page 9.31) item no. 1367577/87 (page 9.31)
OV-Flex ST OV-Flex ST
Stainless steel corrugated pipe Stainless steel corrugated pipe
DN 16 G 34, item no. 1361651/52 DN 16 G 34, item no. 1361651/52
connection and flat sealing insert
DN 20 G 1, item no. 1361653/54 DN 20 G 1, item no. 1361653/54 connection and flat sealing insert
(page 9.58) (page 9.58)
Alternative: Solder nipple
Alternative: Solder nipple
Copper pipe Copper pipe

Connection and coupling set Connection and coupling set
DN 16 G 34, item no. 1369083 DN 16 G 34, item no. 1369083
DN 20 G 1, item no. 1369084 DN 20 G 1, item no. 1369084
(page 9.60) (page 9.60)
Flat sealing insert Flat sealing insert

Regusol Regusol
for Regusol stations DN 20 for Regusol stations DN 20
Compression fitting Compression fitting
item no. 1369086 item no. 1369086
DN 25, G 1 DN 25, G 1
for Regusol stations DN 25 item no. 1367577/87 (page 9.31) for Regusol stations DN 25 item no. 1367577/87 (page 9.31)
item no. 1659990 item no. 1659990
(page 9.60) (page 9.60)
Regusol Stations DN 20/ DN 25 Regusol Stations DN 20/ DN 25 Regusol Stations DN 20/ DN 25 Regusol Stations DN 20/ DN 25
9.46 2017
Solar thermal energy "OKF-MQ25" Freestanding installation
"OKF-MQ25" Freestanding installation

for "OKF-MQ25" flat-plate collectors
Basic set 1361486 Pre-assembled aluminium mounting rails for

for the installation of one collector horizontal freestanding installation of one
collector with an inclination angle of
35 - 55. A connection set is included.
Extension set 1361487 A basic set is required for the installation of an

for each additional collector for horizontal installation side by side extension set. A collector coupling with
connection set is included.
2017 9.47
Solar thermal energy "OKF" Gravel plate set
"OKF" Gravel plate set Trapezoidal sheets made of corrosion

protected steel for floor anchoring of the "OKF"
Trapezodial sheet for 1361283 freestanding installation.
vertical installation The mounting triangles are fixed on the
(1300 x 1035 x 0.75) trapezoidal sheets by use of clamping brackets
and rivets.
Depending on the type of installation (vertical
Trapezodial sheet for 1361284 or horizontal) and the size of the collector field,
horizontal installation the trapezoidal sheets and mounting sets have
(1035 x 1000 x 0.75) to be ordered separately - see below table.
Due to the positioning of the collector supply
and return connections (see page 9.43),
Installation set for 1361228
horizontal installation has to be carried out as
vertical installation
an individual unit.
consisting of:
-10 aluminium clamping brackets
-14 rivets
Installation set for 1361229

horizontal installation
consisting of:
-16 aluminium clamping brackets
-24 rivets
OKF-CK22/OKF-CS22
Number of vertical collectors
Item no. 1 2 3 4 5 6
9 Trapezoidal sheet for vertical installation (1300 x 1035 x 0.75) 1361283 2x 4x 6x 8x 10 x 12 x
Installation set for vertical installation (10 clamping brackets, 14 rivets) 1361228 2x 3x 4x 5x 6x 7x
Vertical freestanding installation (basic set) 1361387 1x 1x 1x 1x 1x 1x
Vertical freestanding installation (extension set) 1361388 1x 2x 3x 4x 5x
Number of horizontal collectors
Item no. 1 2 3 4 5 6
Trapezoidal sheet for horizontal installation (1035 x 1000 x 0.75) 1361284 4x 8x 12 x 16 x 20 x 24 x
Installation set for horizontal installation (16 clamping brackets, 24 rivets) 1361229 1x 2x 3x 4x 5x 6x
Horizontal freestanding installation (individual set) 1361389 1x 2x 3x 4x 5x 6x
OKF-MQ25
Number of horizontal collectors
Item no. 1 2 3 4 5 6 7 8 9 10
Trapezoidal sheet for horizontal installation (1035 x 1000 x 0.75) 1361284 2 3 4 5 6 7 8 9 10 11
Installation set for horizontal installation (16 clamping brackets, 24 rivets) 1361229 1 2 3 4 5 6 7 8 9 10
Horizontal freestanding installation (basic set) 1361486 1 1 1 1 1 1 1 1 1 1
Horizontal freestanding installation (extension set) 1361487 1 2 3 4 5 6 7 8 9
9.48 2017
"OKF" Roof hooks made of galvanised steel
Solar thermal energy Carrying handles for "OKF" flat-plate collectors
"OKF" Roof hooks made of galvanised steel Roof hooks including wood screws required for
fixing onto the rafter. Pre-assembled fixing
for pan tiled roofs plate for a quick installation of the roof hooks
to the mounting rails (rooftop installation set).
Basic set = 6 roof hooks 1361250 6 roof hooks are required for the "OKF" rooftop
Extension set = 2 roof hooks 1361251 installation (basic set). 2 roof hooks are
required for the extension set. The number of
roof hooks is project related and has to comply
with the standards (DIN 1055-4 and -5) and the
wind and snow load stressing. A suitable fixing
for pan tiled roofs, adjustable height base which can absorb the emerging forces
(weight, wind and snow load stressing) is
paramount for a correct usage.
Extension set = 2 roof hooks 1361253
for plain tiled roofs

for slate roofs

for corrugated Eternit and sheet metal roofs

9
Carrying handles for "OKF" flat-plate collectors

Two carrying handles for an easy transport
of the "OKF" flat-plate collectors on site.
The carrying handles are connected to the
collector frame laterally.
Carrying handles for "OKF-CK22" 1361249

Set = 2 pieces
Carrying handles for OKF-CS22 1361248

and "OKF-MQ25"
Set = 2 pieces
2017 9.49
Solar thermal energy Accessories for flat-plate collector "OKF-MQ25"
Accessories for flat-plate collector "OKF-MQ25"
Field compensator for "OKF-MQ25" 1361448

Field compensator for collector fields with more than 6 flat-plate
collectors "OKF-MQ25" installed side by side
(2 compensators are required)
"OKF-MQ25" Connection set 1361488

for one collector field
"OKF-MQ25" Mounting aid 1361489

To simplify the installation of the compensators for the collector
couplings
9.50 2017
Solar thermal energy 9.d "Solcos" Solar packages
Page

Content
"Solcos" Solar packages with "OKP" tube collectors 9.52
"Solcos" Solar packages with "OKF-CK22" flat-plate collectors 9.53
"Solcos" Solar packages with "OKF-CS22" flat-plate collectors 9.54
2017 9.51
Solar thermal energy "Solcos" Solar packages with "OKP" tube collectors
"Solcos" Solar packages with "OKP" tube collectors The "OKP" roof hooks (see page 9.41) are not
consisting of: included in the solar packages and have to be
"OKP" tube collectors ordered separately depending on the roof
Pre-assembled mounting rails construction and covering. The compression
for rooftop installation fittings for the connection of the fittings
Solar station 1369076 and 1369078 to copper and precision
Collector connection set steel pipes (12, 15, 16, 18 and 22 mm) are to
Roof conduits be ordered separately: page 9.31
Connection pieces for the connection of
the roof conduits to the solar circuit For installation, for instance on a flat roof, the
Solar liquid basic and extension sets are to be ordered
Expansion tank separately: page 9.41
Storage cylinder
For the connection of a diaphgragm expansion
Hot potable water preparation tank to the "Regusol" pump groups, further
components, such as angled wall brackets,
Package 1: 1365020 quick-coupling and flexible hose are required:
Hot water demand for 2 - 4 people page 9.56
For further important advice regarding the

Hot potable water preparation and support of the heating system design of a solar plant see "Thermal solar plant
- Construction, initial operation and
Package 2: 1365040 maintenance" at www.oventrop.de.
Living space up to approx. 130 m
Package 3: 1365050 Further information and ErP data:
Package 4: 1365060
9 Living space up to approx. 240 m
Hot potable
water preparation Hot potable water preparation and heating system
Package 1 Package 2 Package 3 Package 4
Item no. 1365020 1365040 1365050 1365060
OKP-20 1361231 2 4 4 5
Collector connection set
Connection set 100 mm (set = 2 pieces) 1361622 1 3 3 4
U-bend for the connection of supply and return 1361295 1 1 1 1
DN 16 roof conduit, G 34 collar nut 1361671 1
DN 20 roof conduit, G 1 collar nut 1361672 1 1 1
Insulation
Insulation set (set = 2 x 0.5 m) 1361623 1 2 2 2
Connection pieces
DN 16, G 3/4 x G 1 (set = 2 pieces) 1369076 1
DN 20, G 1 x G 1 (set = 2 pieces) 1369078 1 1 1
Expansion tank
18 l 1361421 1
25 l 1361422 1 1
33 l 1361423 1
50 l 1361424
80 l 1361425
Connection set for diaphragm expansion tank 1369051 1 1 1 1
Solar liquid
10 l 1361690 1
25 l 1361691 1 1 1 1
Solar station
Regusol EL-130-RC with controller Regtronic RC 1366597 1
Regusol ELH-130-RC-P with controller Regtronic RC-P 1360394 1
Regusol X-Uno 25 1361060 1
Regusol X-Duo 25 1361050 1
Stations for hot potable water preparation
Regumaq X-30 1381030 1 1 1
Storage cylinders
Buffer storage cylinder (type: 1000, 1500) 1385010/15 Type 1.000 Type 1.500
Solar buffer storage cylinder (type: 800) 1385107 Type 800
Bivalent solar storage cylinder (type: 300) 1387303 Type 300
corresponds corresponds corresponds
Energy efciency class B
to C to C to C

Solar thermal energy "Solcos" Solar packages with "OKF-CK22" flat-plate collectors
"Solcos" Solar packages with "OKF-CK22" flat-plate collectors The "OKF" roof hooks (see page 9.49) are not
"OKF-CK22" flat-plate collector with plug-in connection ordered separately depending on the roof
Pre-assembled mounting rails construction/roof covering.
for roof top installation
Solar station For the connection of a diaphgragm expansion
Collector connection set tank to the "Regusol" pump groups, further
Collector connection pipe components, such as angled wall brackets,
Solar liquid quick-coupling and flexible hose are required:
Expansion tank page 9.56
Storage cylinder
For further important advice regarding the
Hot potable water preparation design of a solar plant see "Thermal solar plant
- Construction, initial operation and
Package 5: 1365520 maintenance" at www.oventrop.de.
Hot water demand for 2 - 4 people
Hot potable water preparation and support for the heating system
Package 6: 1365540
Package 7: 1365550
Package 8: 1365560
Hot potable
Item no. 1365520 1365540 1365550 1365560
OKF-CK22 1361340 3 5 5 6
OKF Rooftop installation including accessories
Basic set for two collectors with pre-assembled
mounting rails for rooftop installation
1361380 1 1 1 2
including one collector coupling
Extension set for each additional collector with
pre-assembled mounting rails for rooftop installation 1361381 1 3 3 2
Collector connection pipe 1361288 1 1 1 1
Expansion tank
18 l 1361421 1
25 l 1361422 1 1
33 l 1361423 1
50 l 1361424
80 l 1361425
Solar liquid
10 l 1361690 1
25 l 1361691 1 1 1 1
Solar station
Regusol ELH-130 RC with controller Regtronic RC 1366597 1
Station for hot potable water preparation
Regumaq X-30 1381030 1 1 1
Storage cylinder
to C to C to C

Solar thermal energy "Solcos" Solar packages with "OKF-CS22" flat-plate collectors
"Solcos" Solar packages with "OKF-CS22" flat-plate collectors The "OKF" roof hooks (see page 9.49) are not
"OKF-CS22" flat-plate collector with plug-in connection ordered separately depending on the roof
Pre-assembled mounting rails for rooftop installation construction/roof covering.
Solar station
Collector connection set For the connection of a diaphgragm expansion
Collector connection pipe tank to the "Regusol" pump groups, further
Solar liquid components, such as angled wall brackets,
Expansion tank quick-coupling and flexible hose are required:
Storage cylinder page 9.56
Hot potable water preparation For further important advice regarding the
design of a solar plant see "Thermal solar plant
Package 9: 1366020 - Construction, initial operation and
Hot water demand for 2 - 4 people maintenance" at www.oventrop.de.

Hot potable water preparation and support of the heating system
Package 10: 1366040

Package 11: 1366050
Package 12: 1366060
Hot potable
Item no. 1366020 1366040 1366050 1366060
OKF-CS22 1361345 3 5 5 6
OKF Rooftop installation including accessories
Basic set for two collectors with pre-assembled
mounting rails for rooftop installation
1361380 1 1 1 2
Extension set for each additional collector with
pre-assembled mounting rails for rooftop installation 1361381 1 3 3 2
Collector connection pipe 1361288 1 1 1 1
Expansion tank
18 l 1361421 1
25 l 1361422 1 1
33 l 1361423 1
50 l 1361424
80 l 1361425
Solar liquid
10 l 1361690 1
25 l 1361691 1 1 1 1
Solar station
Regusol ELH-130 RC with controller Regtronic RC 1366597 1
Station for hot potable water preparation
Regumaq X-30 1381030 1 1 1
Storage cylinder
to C to C to C

Solar thermal energy 9.e "Solar" Diaphragm expansion tanks for solar thermal energy
Page

Content
"Solar" Diaphragm expansion tanks 9.56
"Solar" In-line tanks 9.56
Accessories 9.56
2017 9.55
"Solar" Diaphragm expansion tanks
"Solar" In-line tanks
Packing
unit
"Solar" Diaphragm expansion tanks Diaphragm according to DIN 4803 T3.

Permissible operating temperature: 70 C
for wall attachment, G male thread, inlet pressure 1.5 bar Max. operating pressure ps: 10 bar
Max. diaphragm peak temperature: 100 C
Nominal volume 18 l 1361421 For the connection of a diaphgragm expansion
Nominal volume 25 l 1361422 tank to the "Regusol" pump groups, further
Nominal volume 33 l 1361423 components, such as angled wall brackets,
quick-coupling and flexible hose are required:
page 9.56.
Approval according to directive 2014/68/EU.
feet welded on, G 1 male thread, inlet pressure 3 bar

"Solar" In-line tanks In-line tank for the protection of the diaphragm
expansion tank and the solar station from
for wall attachment excess temperatures.
The in-line tanks are for instance required if
Nominal volume 6 l 1361011 flat-plate collectors "OKF" are installed
Nominal volume 12 l 1361012 vertically or in central roof heating systems with
9 Nominal volume 20 l 1361013 short pipes. For further important advice
regarding thermal protection see "Thermal
solar plant - Construction, initial operation and
maintenance" at www.oventrop.de.
Accessories
"Regusol" Connection set for diaphragm expansion tank For the connection of a diaphragm expansion
consisting of: tank to the "Regusol" solar station.
- angled wall bracket made of steel
- quick coupling for diaphragm expansion tank
- flexible hose
1369051
Quick coupling for diaphragm expansion tank For the automatic separation of the
expansion tank and the system.
DN 20, G F x G M (25) 1088806
"Expa Con" Solar valve with lead sealable cap
DN 20, Rp x G male thread (25) 1364185
9.56 2017
Solar thermal energy 9.f Pipes and connection fittings
Page

Content
"OV-Flex ST" Flexible pipes for solar thermal energy 9.58
Further connection accessories 9.60
2017 9.57
Solar thermal energy "OV-Flex ST" Flexible pipes for solar thermal energy
"OV-Flex ST" Flexible pipes for solar thermal energy Quick mounting pipe for a flexible roof conduit
and the connection of the collector field to the
Stainless steel corrugated pipe "2 in 2" pipe system. Supply and return in a two-part
DN 16, may be cut to required length high temperature-resistant insulation covering
one port 22 mm stainless steel nipple with a UV-resistant foil coating.
one port G collar nut, flat sealing 2-core sensor cable inside the insulation
covering for the connection of a temperature
length per roll 15 m 1361651 sensor (e. g. PT 1000).
length per roll 25 m 1361652 The stainless steel corrugated pipes may be
cut to required length.
Flat seals, collar nuts and spacer rings are
Stainless steel corrugated pipe 2 in 2 included.
DN 20, may be cut to required length
one port 22 mm stainless steel nipple Max. operating pressure ps: 16 bar
one port G 1 collar nut, flat sealing Continuous operating temperature ts:
150 C (for short periods up to 175 )
length per roll 15 m 1361653
length per roll 25 m 1361654
Oval clamp set Oval clamps to fix the stainless steel

corrugated pipes onto the wall or the
"2 in 2" 1361655 ceiling.
- 4 oval clamps, galvanised
- 4 dowels, 10 mm
- 4 screws, M 8 x 80
"OKP" Stainless steel corrugated pipe set 1 m Quick mounting pipe for a flexible roof conduit
9 Set = 2 pieces and the connection of the collector field to the
pipe system. High temperature-resistant
DN 16 1361671 insulating covering with a UV-resistant foil
one port 22 mm stainless steel nipple coating. Flat seals are included
one port G collar nut, flat sealing
DN 20 1361672 Max. operating pressure ps: 16 bar
one port 22 mm stainless steel nipple Continuous operating temperature ts:
one port G 1 collar nut, flat sealing 150 C (for short periods up to 175 C)
"OKP" Connection set 100 mm The connection set allows a quick and safe
Set = 2 pieces pipe connection and the series coupling of
several manifolds into a large collector field.
DN 20 1361622
both ports 22 mm stainless steel nipple
"OKP" U-bend Both ports for 22 mm compression fitting,

U-bend pre-insulated.
for the connection of the return pipe 1361295
to the supply pipe
"OKF" Connection set Two insulated T-shaped connection pieces

for the horizontal connection of two "OKF"
Set = 2 pieces 1361246 collectors side by side.
2 x G collar nut for the connection of two
"OKF" collectors and 1 x G male thread
for the connection to the roof conduit.
9.58 2017
Solar thermal energy Connection fittings
Packing
unit
Connection fittings
for "OKP" tube collectors (flat sealing)
G x 22 mm pipe coupling (25) 1361680 For the connection of "OKP" collectors to

DN 20 G corrugated metal pipes.
G 1 x 22 mm pipe coupling (25) 1361681 For the connection of "OKP" collectors to
DN 20 G 1 corrugated metal pipes.
for "OKP" tube collectors + "OKF" flat-plate collectors Connection fitting with flat seal for the
(for compression fittings "Regusol") connection of the stainless steel corrugated
pipe 1 m to "Regusol" compression fittings
G x G 1, DN 16 (10) 1369076 (12, 15, 16, 18 and 22 mm).
Set = 2 pieces The compression fittings are to be ordered
G 1 x G 1, DN 20 (10) 1369078 separately: page 9.31
Set = 2 pieces
Double nipple set Set consisting of 2 double nipples and 4 flat

seals. Double nipple, for instance for the
GxG (10) 1369096 extension of stainless steel corrugated pipes
G1xG1 (10) 1369098 "2 in 2".
for "OKF" flat-plate collectors

(for compression fittings Regusol)
G female thread x G 1
Set = 2 pieces
(10) 1361279 Connection fitting for the connection of the
stainless steel corrugated pipe "2 in 2" and
9
stainless steel corrugated pipe 1 m to the
"OKF" flat-plate collectors (G male thread).
Apart from the connection fittings, the collar
nut as well as the 22 mm compression rings
are included.
Stainless steel
OKP Connection possibilities
corrugated pipe
DN 20 1361653/54 1361622 1361295
Stainless steel
corrugated pipe
DN 16 1361651/52
Connection of
corrugated pipe Double nipple Roof conduit
with G 1 collar nut 1369098 DN 20 1361672 1361622 1361295
Connection of Double nipple Roof conduit

corrugated pipe 1369096 DN 16 1361671
with G 34 collar nut
Compression
Smooth Compression ring Roof conduit
pipe tting 1369078 DN 20 1361672 1361622 1361295
Smooth Compression Compression Roof conduit

pipe tting ring DN 16 1361671
1369076
Connection of
corrugated pipe Connection piece
with G 1 collar nut DN 20 1361681 1361622 1361295
Connection of Connection piece

corrugated pipe with DN 16 1361680
G 34 collar nut
2017 9.59
Solar thermal energy Further connection accessories
Packing
unit
Further connection accessories
"Regusol" - Connection set Connection fitting for the connection of the

flexible stainless steel corrugated pipe "2 in 2"
Collar nut G 1 and (10) 1369085 DN 16 with G collar nut to "Regusol" stations
G male threaded tailpipe DN 25.
Flat sealing insert For the conversion of a tapered (metal to metal

sealing) connection to a flat sealing connection.
for "Regusol" stations DN 20 (100) 1369086
for "Regusol" stations DN 25 1659990
Connection and coupling sets Spare part for the extension or shortening
consisting of: of corrugated stainless steel pipes 2 in 2.
2 x collar nut, 2 x spacer ring
and 2 x ring gasket
DN 16, G collar nut 1369083

DN 20, G 1 collar nut 1369084
Insulation set For the insulation of connection pieces and

collector connections (for instance connection
Solar EPDM insulation layer 1361623 set 100 mm, item no. 1361622).
2 x 0.5 m The insulation is slotted on the entire length.
with tear-proof foil and adhesive roll
9
Braiding set Braided sleeve/tissue made of polyamide 6.6
as additional protection against bird's pecking
2 x 1.2 m 1361694 in the open.
with adhesive roll For instance suitable for the roof conduits
1361671 or 1361672.
9.60 2017
Solar thermal energy for application outside the collector circuit
Page

97
C
OV
Rg5 H Content
MIX
AB
OV
A
B

"Brawa-Mix" 9.65
Spare parts 9.66
"Optibal" High temperature ball valves 9.67
"Optiflex" Fill and drain ball valves for solar plants 9.67
Fill and drain cocks PN 16 heavy pattern - DIN 3848 9.67
2017 9.61
Solar thermal energy "Tri-CTR" Three-way diverting and mixing valves PN 16
Packing
unit

bronze Max. operating pressure ps: 16 bar (PN 16)
connection thread M 30 x 1.5 Operating temperature ts: 0 C up to 120 C
with collar nuts, flat sealing Diverting, mixing and changing-over of volume
flows in heating and cooling systems in
DN 20 1130206 combination with thermostatic or electric
DN 25 1130208 actuators. Application for instance for storage
DN 40 1130212 cylinder loading function or heating
I
OV
II installations with two heat generators as for
III instance in solar plants or heat pump systems
(bivalent heating systems).
Male thread:
DN 20, G 1
DN 25, G 1
"Tri-M TR" Three-way mixing valves PN 16 DN 40, G 2
bronze
connection thread M 30 x 1.5 The valves can be used in combination with
with collar nuts, flat sealing Oventrop temperature controllers or actuators.
DN 20 1131706 "Tri-CTR":
DN 25 1131708 Function:
OV
DN 40 1131712 For use as diverting valve, the three-way valve
AB A
B
(A and B). Depending on the position of the
valve disc, the direction of flow is diverted from
9 For use as mixing valve, the three-way valve
has two inlet ports (A and B) and one outlet
"Tri-CTR" Three-way diverting and mixing valves PN 16
bronze port (AB). Depending on the position of the
valve disc, the cold and hot water is mixed.
The three-way valves "Tri-CTR" can be used
DN 15 (10) 1131204
DN 20 (10) 1131206
DN 25 (10) 1131208
DN 32 (5) 1131210
DN 40 (5) 1131212
DN 50 (5) 1131216

Solar thermal energy Accessories sets for three-way valves"Tri-D TR", "Tri-M TR" and "Tri-CTR"
Packing
unit
Accessories sets for three-way valves"Tri-D TR", "Tri-M TR" and

"Tri-CTR"
Weldables tailpipe 3-fold
for valve DN 15 (10) 1130091

for valve DN 20 (10) 1130093
for valve DN 25 (10) 1130094
for valve DN 32 (5) 1130095
for valve DN 40 (5) 1130096
for valve DN 50 (5) 1130098
Solder tailpipes 3-fold
15 mm for valve DN 15 (10) 1130191

15 mm for valve DN 20 (10) 1130192
18 mm for valve DN 20 (10) 1130193
22 mm for valve DN 20 (10) 1130194
28 mm for valve DN 25 (10) 1130195
35 mm for valve DN 32 (5) 1130199
35 mm for valve DN 40 (5) 1130196
42 mm for valve DN 40 (5) 1130197
54 mm for valve DN 50 (5) 1130198
Threaded tailpipes 3-fold
R for valve DN 15
R for valve DN 20
(10)
(10)
1130291
1130292
9
R for valve DN 20 (10) 1130293
R 1 for valve DN 25 (10) 1130294
R 1 for valve DN 32 (5) 1130299
R 1 for valve DN 40 (5) 1130295
R 1 for valve DN 40 (5) 1130296
R 2 for valve DN 50 (5) 1130298
2017 9.63
Solar thermal energy Temperature controllers
Temperature controllers Application:

connection thread M 30 x 1.5 Water, max. sensor temperature 30 K above
Temperature controller the set value.
with immersion sensor For industrial installations, water heaters, air
Immersion pocket G connection heaters, hot cabinets, dish-washers, surface
heating systems or similar.
Control range Capillary length The control range can be limited or locked.
20 - 50 C 2m 1140561 For further information see

40 - 70 C 2m 1140562 "Technical information":
50 - 80 C 2m 1140563
70 - 100 C 2m 1140564
20 - 50 C 5m 1140571
40 - 70 C 5m 1140572
70 - 100 C 5m 1140574
Immersion 1141091
pocket only

5 4 3
oventrop
20 - 50 C 2m 1142861
30 - 60 C 2m 1142862
40 - 70 C 2m 1142863
9 50 - 80 C 2m 1142864
9.64 2017
Solar thermal energy "Brawa-Mix"
Packing
unit
"Brawa-Mix"
Thermostatic mixing valve
with "fail-safe" function
Bronze, spring made of vanadium steel, control Application:

piston made of polyphenylene ether, EPDM O-rings, Potable water installations PN 10,
both ports flat sealing male thread according to up to 90 C.
DIN ISO 228, handwheel lockable and lead lockable Control range: 35 C up to 65 C
Connection fittings: from page 8.66
DN 20 1300306
DN 25 1300308 Awards:
DN 32 1300310 German Designer Club
Good Design 08
universal
design
Bronze body, brass components resistant Application:

to dezincification, brass couplings, Potable water installations PN 10,
G 1 male thread with 3 collar nuts up to 90 C.
Control range: 35 C up to 50 C
DN 20 1300351
without collar nuts 1300352

(for compression fittings) 9
Accessories sets (for item no. 1300351)
Set 1 = 3 tailpipes
with male thread R (10) 1300391

Compression fittings 3-fold complete with 3 collar nuts Only for item no. 1300352.
15 mm (10) 1300381
18 mm (10) 1300382
22 mm (10) 1300383
Bronze inline thermometer with dial For connection to the Brawa-Mix.

40 60
20 80
DN 20 1300952 Length: 74 mm
Bronze non-return valve for cold water Up to 95 C
DN 20 1302006 Length: 61 mm
without "fail-safe" function Application:

Bronze body, brass components resistant Potable water installations PN 10,
to dezincification, brass couplings up to 90 C, with lateral mixed water
outlet.
G 1 male thread (25) 1300200 Control range: 30 C up to 70C
without collar nuts
as above but with lead lockable (20) 1300251

protection cap,
preset to 57 C,
with 3 collar nuts and gaskets

Solar thermal energy Spare parts
Packing
unit

with simple wire basket, 600 m operation with non-aggressive, harmless fluids
DN 8 (10) 1120002 mixtures according to VDI 2035/NORM
DN 10 (10) 1120003 5195).
DN 15 (10) 1120004 Strainers 11200/10:
DN 20 (10) 1120006 Material resistant to: mineral, heating and
DN 25 (10) 1120008 hydraulic oils, fuels, water vapour, as well as air
DN 32 (5) 1120010 and other harmless non-aggressive gases (not
DN 40 (5) 1120012 suitable for gaseous fluids group 1 according
DN 50 (5) 1120016 to directive 2014/68/EU)
DN 65 1120020
with double wire basket for fine filtering, 250 m (The valid rules and standards for the use of
DN 8 (10) 1121002 range.)
DN 10 (10) 1121003
DN 15 (10) 1121004 The sizes DN 10 - DN 80 are WRAS (United
DN 20 (10) 1121006 Kingdom) certified for installation in potable
DN 25 (10) 1121008 water systems.
DN 32 (5) 1121010
DN 40 (5) 1121012 CE-marking for size DN 65 and above
DN 50 (5) 1121016 according to directive 2014/68/EU.
9 DN 65
DN 80
1121020
1121024
The strainers DN 10 - DN 20 are suitable
for use with compression fittings, item no.
10271.., page .
Spare parts
DN 8 DN 50 bronze body, brass bonnet.
DN 65 DN 80 brass body and bonnet.
Wire basket Wire basket made of stainless chromium steel.
(mesh size 600 m)
Item no. 11200:
DN 8 + DN 10 1123003
Mesh size 0.6 mm
DN 15 1123004
DN 20 1123006
DN 25 1123008
Item no. 11210:
DN 32 1123010
Mesh size 0.25 mm
DN 40 1123012
DN 50 (100) 1123016
DN 65 1123020
DN 80 1123024
Double wire basket

(mesh size 250 m)
DN 8 + DN 10 1123103
DN 15 1123104
DN 20 1123106
DN 25 1123108
DN 32 1123110
DN 40 1123112
DN 50 1123116
DN 65 1123120
DN 80 1123124
9.66 2017
"Hygate ATR" Gate valves PN 25
Solar thermal energy "Optibal" High temperature ball valves
Packing
unit

(with isolating facility, threaded connection, bronze)
DN 10 (50) 1043003
DN 15 (50) 1043004
DN 20 (50) 1043006
DN 25 (25) 1043008
DN 32 (20) 1043010
DN 40 (10) 1043012
DN 50 (5) 1043016
DN 65 (5) 1043020
DN 80 (2) 1043024
"Optibal" High temperature ball valves

brass, nickel plated, reduced flow,
PN 16, max. continuous operating temperature 150 C,
max. short-time starting temperature 180 C,
extended plastic handle
DN 20 (10) 1078706
DN 25 (10) 1078708
DN 32 (5) 1078710
9
Accessories
Stem seal for replacement purposes (set of 5 pieces)

(not suitable for valves with marking "HT")
DN 20 1078790
DN 25 / 32 1078791
"Optiflex" Fill and drain ball valves for solar plants Application:
brass, handle with stop For filling and draining of heating systems,
male thread, self sealing, with counternut boilers, radiators and pipework also in solar
plants.
and cap The brass ball valve is suitable for water and
mixtures of water and glycol up to PN 16 and
DN 15 nickel plated (50) 1033372 150C.
Also suitable for the connection to plastic or

copper pipe.
Angle pattern,
with hose connection (soft seal) Compression fittings and reinforcing sleeves:
and cap pages 1.140 -1.143
DN 15 nickel plated (50) 1033672 The hose connection is made of plastic.
Fill and drain cocks PN 16 heavy pattern - DIN 3848 Application:

bronze Fluids, steam and treated heating water (e. g.
district heating) up to PN 16 and 150 C (for
Heavy pattern - bronze, PN 16 short periods up to 180 C)
based on DIN 3848
OV
with hose connection and cap
DN 10 (50) 1032003
DN 15 (50) 1032004
DN 20 (25) 1032006
DN 25 (10) 1032008
2017 9.67
Solar thermal energy "Optibal" High temperature ball valves
Packing
unit

DN 10 (50) 1034003 G
DN 20 (25) 1034053 G1
DN 25 (25) 1034008 G 1
Square spanner

Hose connection Female thread of the collar nut
DN 10 (50) 1034551 G (for hose DN 15)

DN 15 (50) 1034504 G
DN 20 (50) 1034506 G1
DN 25 (25) 1034508 G 1
9.68 2017
Solar thermal energy 9.h Further accessories
Page
9.h Further accessories

Content
Further accessories 9.70
2017 9.69
Solar thermal energy 9.h Further accessories
Regudis W-HTU Dwelling station Dwelling station with plate heat exchanger
for heat transmission from a central heat
supply to the sanitary and heating
installation of a dwelling.
Page 6.79.
Regumaq Stations for hot potable water preparation Electronically controlled product
assembly with integrated plate heat
exchanger for the hygienic heating
of potable water on the flow principle.
Page 6.100.
Hydrocor Storage cylinders Hydrocor cylinders for the storage of

heating water or potable water.
Page 10.18.
Regucor Energy storage centres Regucor WHS buffer storage centre

for solar-assisted supply of detached
and semi-detached houses with heat
and hot water.
Page 10.07.
9.70 2017
Storage cylinders Content
Page
10.a "Regucor WHS" Energy storage centres

Content 10.03
System illustration (zone loading) 10.05
"Regucor WHS" Energy storage centres 10.06
"Regucor "WH" Energy storage centres 10.08
Accessories 10.09
Accessories - zone loading 10.10
10.b "Regucor WHP" Energy storage centre ("Power to heat")

Content 10.13
"Regucor WHP" Energy storage centre ("Power to heat") 10.15
10.c "Hydrocor" Storage cylinders

Content 10.17
"Hydrocor - HP" Buffer storage cylinder 10.18 10
"Hydrocor - HS" Solar buffer storage cylinder 10.18
Storage cylinder dimensions/connections 10.19
"Hydrocor - WB" Potable water storage cylinder 10.18
Accessories 10.20
2017 10.01
Storage cylinders 10.a "Regucor WHS" Energy storage centres
Page

Content
System illustration (zone loading) 10.05
"Regucor WHS" Energy storage centres 10.06
"Regucor "WH" Energy storage centres 10.08
Accessories 10.09
Accessories - zone loading 10.10
10
2017 10.03
Storage cylinders System illustration
System illustration
10
Regucor WHS in combination with a conventional heat generator
1 System storage cylinder

2 Add-on group: Solar
3 Add-on group: Fresh water
4 Add-on group: Heating circuit 1
5 Add-on group: Heating circuit 2 (optional)
6 System controller Regtronic RS
7 Heat generator (e.g. oil/gas/heat pump/solid fuel)
10.04 2017
Storage cylinders System illustration (zone loading)
System illustration
10
Regucor WHS in combination with heat generator for an energy efcient storage cylinder loading

2 Add-on group: Solar
6 System controller Regtronic RS
8 Motorised conversion valve for zone loading
Re-loading is activated by the system controller Regtronic RS as soon as the temperature in the centre of the storage cylinder below the separation
sheet (heating circuit operation) or in the part above the separation sheet (domestic water in stand-by motion) drops below the minimum adjustable
temperature.
The domestic water section and the heating circuit section of the storage cylinder are loaded separately via the two motorised conversion valves for zone
loading. Moreover, re-loading of the heating circuits is independent of the calculated nominal ow temperature which guarantees an efcient re-loading
and loading of the corresponding part of the storage cylinder. The controller only asks for the heat which is really required by the heat generator (e.g.
oil/gas/heat pump/solid fuel).
In order to achieve a high solar share, the largest possible volume of buffer storage cylinder is used for the storage of solar energy.
2017 10.05
Storage cylinders "Regucor WHS" Energy storage centres
"Regucor WHS" Energy storage centres Energy storage centre "Regucor WHS" for
consisting of system storage cylinder solar-assisted supply of detached and semi-
and storage cylinder add-on groups detached houses with heat and hot water.
Storage cylinder and add-on groups
Add-on group: Solar co-ordinated functionally and
"Regusol LH-130" DN 20 solar station thermodynamically. With integrated piping and
with high-efficiency pump Wilo-Yonos PARA ST 15/7 PWM, plug-in cabling. For combination with classic
flow measuring device 2-14 l/min., (e.g. gas/oil) and regenerative heat generators
with safety group for riser installation 6 bar. (e.g. heat pump/solid fuel) in existing and new
Connections: buildings.
G male thread according to DIN EN 16313 (cone "Euro")
Suitable for standard solar liquids. Included accessories:
1 remote control with room temperature sensor
Add-on group: Hot potable water preparation (PT 1000)
"Regumaq XH" DN 20 hydraulically controlled 1 collector sensor (PT 1000) L = 2 m
heat exchanger system for the hygienic heating of 3 storage cylinder sensors (PT 1000) L = 4 m
potable water according to the continuous flow 1 sensor attached to the pipe (PT 1000)
principle. With high-efficiency pump Wilo-Yonos L = 1.5 m
PARA RS 15-7 PWM2, temperature controller 1 outdoor sensor (PT 1000)
40 - 60 C and copper or nickel brazed heat 1 safety group - solar 6 bar
exchanger. 2 "Regusol" compression fittings
Connections: G male thread, flat sealing (18 mm, G collar nut)
Recommended discharge capacity: 15-20 l/min., 2 "Regusol" compression fittings
depending on the set potable water temperature and (18 mm, G 1 collar nut)
the existing water temperature inside the buffer storage cylinder.
"Regusol" compression fittings and reinforcing
Add-on group: Heating circuit sleeves: page 9.31
"Regumat M3-130" DN 20 with high-efficiency pump
Wilo-Stratos PICO 15/1-6, three-way mixing valve Controller details: from page 7.20
and actuator.
Connections: G 1 male thread, flat sealing Suitable tailpipes for the connection of the
For weather guided flow temperature control. heating circuit (G 1 collar nut, flat sealing) and
10 sanitary installations (G collar nut, flat
System controller: sealing): from page 8.66
"Regtronic RS" for the control of the energy
storage centre "Regucor WHS" and further system Suitable collectors "OKP" and OKF":
components. Up to 13 free inputs and up to 9 free from page 9.40
solid-state relay outputs. S-bus for the connection
to the data logger "CS-BS", SD-card slot for data The energy storage centre "Regucor" is
recording. supplied on a pallet sized 1.20 x 1.60 m.
Stations of the same function for wall mounting

ErP classication Regtronic RS for Regucor WHS
are available for the individual design of a
Boiler control system:
Required
Controller
accessories
modulating
On/Off
ErP % Class -"Regusol LH-130" DN 20 solar stations:
(0-10 V)
from page 9.07
Regucor controller X 4.0 VI -"Regumat M3-130" DN 20 heating circuit
Regtronic RS groups: from page 6.07
incl. remote control X 3.5 VII -"Regumaq XH" stations for hot potable
with room
2 x room temperature
water preparation:
temperature sensor
sensor 1152095
X 5.0 VIII from page 6.110
-Solar buffer storage cylinders:
from page 10.18
System storage cylinder:
Solar buffer storage cylinder with lifting eyes, Award:
removable thermal insulation and integrated
temperature layer unit.
Connections and fixing positions co-ordinated
with "Regucor WHS" add-on groups.
Connections: 8 x G 1 female thread
Max. operating pressure ps: 3 bar (coil 10 bar)
Operating temperature ts: 95 C (coil 110 C)
10.06 2017
Storage cylinders "Regucor WHS" Energy storage centres
Type 500 Energy efficiency class A As for the "Regucor" type 500
energy efficiency class A, the two-part
System storage cylinder type 500, nominal content 475 l insulation has to be ordered separately.
Total height (without insulation): 1720 mm
Diameter (without insulation): 650 mm
Total height (with insulation): 2070 mm
Diameter (with insulation): 980 mm
Heat exchanger made of stainless steel, 1383645

copper brazed
without insulation
Insulation for type 500

Energy effieciency class A
1383646
Type 800
System storage cylinder type 800, nominal content 706 l

copper brazed
nickel brazed
Type 1000
System storage cylinder type 1000, nominal content 900 l
Total height (without insulation): 2055 mm 10

copper brazed
nickel brazed
2017 10.07
Storage cylinders "Regucor "WH" Energy storage centres
"Regucor "WH" Energy storage centres Energy storage centre "Regucor WH" for the
as "Regucor WHS", but without solar station supply of detached and semi-detached houses
and without electronic controller with heat and hot water. Storage cylinder and
add-on groups co-ordinated functionally and
System storage cylinder type 800, nomial content 706 l thermodynamically.
Upgrading of the solar plant is prepared, a
Heat exchanger made of stainless steel, 1383460 solar heat exchanger is integrated in the
copper brazed storage cylinder.
By subsequent installation of the solar station
"Regusol LH-130" (item no. 1383480) and the
System storage cylinder type 1000, nominal content 900 l electronic controller "Regtronic RS" (item no.
1383485), the station can be upgraded to a
Heat exchanger made of stainless steel, 1383465 "Regucor WHS".
copper brazed Suitable tailpipes for the connection of the
heating circuit (G 1 collar nut, flat sealing) and
sanitary installations (G collar nut, flat
sealing): from page 8.66
The energy storage centre "Regucor" is

supplied on a pallet sized 1.20 x 1.60 m.
Stations of the same function for wall mounting

are available for the individual design of a
system:
-"Regumat M3-130" DN 20 heating circuit
groups: from page 6.07
-"Regumaq XH" stations for hot potable
water preparation:
from page 6.110
-Solar buffer storage cylinders:
from page 10.18
10 Further information and ErP data:
"Regusol LH-130" Extension set solar "Regucor WH" "Regusol LH-130" for the connection of the
"Regusol LH-130" DN 20 solar station with solar collectors to the energy storage centre
high-efficiency pump Wilo-Yonos PARA ST 15/7 PWM, "Regucor WH".
flow measuring device 2-14 l/min., Included accessories:
with safety group for riser installation 6 bar, 1 collector sensor (PT 1000) L = 2 m
connections G male thread according to 1 safety group - solar 6 bar
DIN EN 16313 (cone "Euro"), 2 connection elbows
suitable for standard solar liquids 2 connecting pipes
2 "Regusol" compression fittings
1383480 (18 mm, G collar nut)
2 "Regusol" compression fittings
(18 mm, G 1 collar nut)
"Regusol" compression fittings and reinforcing

sleeves: page 9.31
Suitable collectors "OKP" and "OKF":
from page 9.40
Further solar stations "Regusol": from
page 9.07
"Regtronic RS" Extension set "Regucor WH" For the control of the energy storage centre
12 inputs PT 1000, PT 500 or KT "Regucor WH" and further system
3 pulse inputs components. Up to 13 free inputs and up to 9
14 outputs free solid-state relay outputs. S-bus for the
4 PWM outputs (convertible to 0-10 bar) connection to the data logger "CS-BS",
Data output S-bus SD-card slot for data recording.
1383485 Included accessory:

1 outdoor sensor (PT 1000)
1 remote control with room temperature sensor
10.08 2017
Storage cylinders Accessories
Accessories
"Regucor "WH/WHS" - Extension of the energy storage centres

Extension heating circuit "Regucor WHS/WH" by an additional variable
"Regumat M3-130" DN 20 heating circuit, Wilo pump temperature heating circuit. Weather guided
Stratos PICO 15/1-6, with three-way mixing valve and actuator control via "Regtronic RS".
1383575
Safety group Solar 1364248 Connection facility for an expansion tank G .

for riser installation with safety valve 6 bar Display range pressure gauge: 10 bar
for Regusol compression fitting
Suitable Regusol compression fittings:
page 9.31
Insulation cap Insulation cap made of expanded

polypropylene for buffer and solar buffer
for G 1 connection sleeves 1389001 storage cylinders. For thermal insulation of
unused connections.
"Regumaq XH" 1381047 Extension of the energy storage centres

Potable water circulation set "Regucor WHS/WH" by a potable water
Connection set with circulation pump circulation. Control of the circulation pump via
Wilo Star Z Nova C and time switch "Regtronic RS".
for the extension of the "Regumaq XH"
10
as above but without circulation pump
and without time switch
"Sensor LW TH" Electric sensor attached

to the pipe with concealed temperature setting
Control range 20-90 C 1143000 For max. limitation of the flow temperature
of surface heating systems.
Connection set for "Regucor "WHS/WH" For the connection of the heating circuit add-
on group "Regumat M3-130" DN 20 to the
Connection: 1383580 heating circuit and for the connection of the hot
- G 1 male x G 1 collar nut for heating circuit add-on group potable water preparation add-on group
- G male x G collar nut for hot potable water preparation "Regumaq XH" DN 20 to the potable water
add-on group circuit.
including flat seals
Extension connection set for "Regucor WHS/WH" For the connection of the heating circuit add-
on group "Regumat M3-130" DN 20 to the
Connection: 1383581 heating circuit.
- G 1 male x G 1 collar nut for heating circuit add-on group
including flat seals
2017 10.09
Storage cylinders Accessories - zone loading
Packing
unit
Accessories - zone loading
storage cylinder.
- Seals
1383583

(diverting valve, threaded connection, bronze) Central heating and cooling systems with
connection thread M 30 x 1.5 aggressive, harmless fluids (e.g. water or
with collar nuts, flat sealing suitable water and glycol mixtures according to
VDI 2035/NORM 5195).
Diverting respectively changing-over
I
OV
II ("Tri-D TR") or mixing ("Tri-M TR")
III of volume flows in heating and cooling systems
in combination with thermostatic or electric
actuators.
Application, for instance for storage cylinder

"Tri-M TR" Three-way mixing valves PN 16 loading function or heating installations with
(mixing valve, threaded connection, bronze) two heat generators, for instance in solar plants
or heat pump systems (bivalent heating
10 connection thread M 30 x 1.5 systems).
The valves can be used in combination with
DN 20 1131706 Oventrop temperature controllers or actuators.
OV
Further three-way valves: page 3.79
AB A
B
"Tri-D TR":
"Tri-M TR":
"Aktor M" Electromotive actuators


Angle pattern adapter

M 30 x 1.5/ M 30 x 1.5 Connection to the valve: M 30 x 1.5
Connection to the thermostat: M 30 x 1.5
white (25) 1011450
anthracite model (25) 1641451

Connection set for diaphgram expansion tank
Storage cylinders "Expa-Con" Solar valve with lead sealable cap
Packing
unit
"Solar" Diaphragm expansion tanks Diaphragm according to DIN 4807 T 3.

Permissible operating temperature ts: 70 C
for wall attachment, G male thread, inlet pressure 1.5 bar Further components, such as angled wall
brackets, quick couplings or flexible hoses
Nominal volume 18 l 1361421 (page 10.11) are required for the connection
Nominal volume 25 l 1361422 of a diaphragm expansion tank to the pump
Nominal volume 33 l 1361423 groups "Regusol".
Max. diaphragm peak temperature ts: 100 C
"Regusol" Connection set for diaphragm expansion tank For the connection of a diaphragm expansion
consisting of: tank to the "Regusol" solar station.
- angled wall bracket made of steel
- quick coupling for diaphragm expansion tank
- flexible hose
1369051
"Expa Con" Solar valve with lead sealable cap
DN 20, Rp x G male thread (25) 1364185

Temperature sensor PT 1000 temperatures. 10
L = 300 cm
L = 200 cm.
Uncontrolled immersion heater for direct

Electrical immersion heater 1383590 heating and warming up of the heating water in
hot water storage cylinders, for instance in the
energy storage centres "Regucor".
Capacity (P): 9 kW
Urequired: 400 V
Housing with integrated controller and limiter

Controller for electrical 1383591 combination.
immersion heater
Controlled immersion heater for direct heating

Controlled immersion heater 1383594 and warming up of the heating water in hot
water storage cylinders, for instance in the
Capacity (P): 9 kW
Urequired: 400 V
Consisting of immersion heater with controller/
limiter combination.
25 C - 70 C

Connection set for diaphgram expansion tank
Storage cylinders "Expa-Con" Solar valve with lead sealable cap
Extension for loading nipple 1383593 Extension for passing the loading nipple
through the insulation.
Extension for electrical immersion heater 1383592 Extension for passing the electrical immersion
heater through the insulation.
10
10.12 2017
Storage cylinders 10.b "Regucor WHP" Energy storage centre ("Power to heat")
Page

Content
"Regucor WHP" Energy storage centre ("Power to heat") 10.15
10
2017 10.13
Storage cylinders System illustration
System illustration
10
Regucor WHP in combination with a conventional heat generator

2 Add-on group: Electric heating
7 Inverter
10.14 2017
Storage cylinders "Regucor WHP" Energy storage centre ("Power to heat")
"Regucor WHP" Energy storage centre ("Power to heat") Energy storage centre "Regucor WHP" for
consisting of system storage cylinder solar supported supply of heat generated by
and storage cylinder add-on groups the surplus electricity of a photovoltaic
installation or other regenerative electricity
Type 500 Energy efficiency class C sources to detached and semi-detached
houses.
Add-on group: "Power to heat" If more photovoltaic electricity is available than
Active power detection, power electronics and immersion heater. required for the supply of the household
appliances, this electricity is used for heating
Add-on group: Hot potable water preparation the energy storage centre "Regucor WHP".
"Regumaq XH" DN 20 hydraulically controlled Storage cylinder and add-on groups
heat exchanger system for hygienic heating of coordinated functionally and
potable water according to the continuous flow thermodynamically. With integrated piping and
principle. With high-efficiency pump Wilo-Yonos plug-in cabling. For combination with
PARA RS 15-7 PWM2, temperature controller conventional (e.g. gas/oil) and regenerative
40 - 60 C and copper brazed heat exchanger. heat generators (e.g. heat pump/solid fuel) in
Connections: G male thread, flat sealing existing and new buildings.
Recommended discharge capacity: 15-20 l/min.,
depending on the set potable water temperature and Power (P) 0-3 kW (infinitely variable)
the existing water temperature inside the buffer storage cylinder. Ureg: 230 V
Add-on group: Heating circuit

"Regumat M3-130" DN 20 with high-efficiency pump
Wilo-Stratos PICO 15/1-6, three-way mixing valve and actuator.
Connections: G 1 male thread, flat sealing
System storage cylinder:

Buffer storage cylinder with lifting eyes,
removable thermal insulation and integrated temperature layer unit.
Connections and fixing positions co-ordinated
with "Regucor WHP" add-on groups.
Connections: 8 x G 1 female thread
System storage cylinder type 500, nominal content: 475 litres 10
Diameter (with insulation): 950 mm
Heat exchanger made of stainless steel, 1371000*

copper brazed
"Power to heat" module for wall attachment The module allows using surplus electricity (for
consisting of: instance from a photovoltaic installation) for
- 1 x "Active power detection" buffer storage cylinder loading, for instance of
- 1 x "Power electronics" a "Hydrocor" storage cylinder.
- 1 x Electrical immersion heater The photovoltaic electricity is primarily used for
(for further immersion heaters see extension set) the supply of the electrical household
- 1 x Temperature sensor appliances. The buffer storage cylinder is only
loaded if surplus electricity is available. A
1371090* control function guarantees that no mains
current is used for storage cylinder loading.
Power (P): 0-3 kW (infinitely variable)
Ureg: 230 V
Extension set The add-on group "power to heat" of the

consisting of: "Regucor WHP" as well as the "power to heat"
1 x Electrical immersion heater module for wall attachment can be extended
1 x Temperature sensor by a maximum of one immersion heater for a
targeted loading of a buffer storage cylinder.
1371091* Surplus photovoltaic electricity is primarily
used for heating of the potable water reserve
and then for support of the heating system.
Power (P): 3 kW
Ureg: 230 V
Further accessories: from page 10.08

Storage cylinders 10.c "Hydrocor" Storage cylinders
Page

Content
"Hydrocor - HP" Buffer storage cylinder 10.18
"Hydrocor - HS" Solar buffer storage cylinder 10.18
Storage cylinder dimensions/connections 10.19
"Hydrocor - WB" Potable water storage cylinder 10.18
Accessories 10.20
10
2017 10.17
"Hydrocor - HP" Buffer storage cylinder
"Hydrocor - HS" Solar buffer storage cylinder
Storage cylinders "Hydrocor - WB" Potable water storage cylinder
Article H D Article-No. Hint
"Hydrocor - HP" Buffer storage cylinder Buffer storage cylinder for the connection of
Buffer storage cylinder for storage of heating water different heat generators (e.g. solar, solid fulel,
heat pump or classic boilers).
Storage cylinder without insulation
Suitable for the following stations:
Type "Regusol X", "Regumaq X-30/XZ-30/XH/X-80"
and "Regudis".
500 1720 mm 650 mm 1387505 Heat transmission from the solar collectors to
the buffer storge cylinder and from the buffer
storage cylinder to the potable water is carried
Insulation for item no. 1387505 out externally via the above stations.
Energy efficiency class: Max. operating temperature ts: 95 C
A 2070 mm 980 mm 1387506 Energy efficiency label is only valid for item no.
C 1820 mm 950 mm 1387006* 1387505 with 1387506.
Storage cylinder with insulation

(corresponds to energy efficiency class C)
800 1775 mm 1090 mm 1385008

1000 2058 mm 1090 mm 1385010
1500 2097 mm 1300 mm 1385015
"Hydrocor - HS" Solar buffer storage cylinder Solar buffer storage cylinder for the connection
Solar buffer storage cylinder for storage of heating water with of different heat generators (e.g. solar, solid
internal tube heat exchanger fuel, heat pump or classic boilers).
Storage cylinder without insulation Suitable for the following stations:

"Regusol", "Regusol E",
Type "Regumaq X-30/XZ-30/XH/X-80".
10 500 1720 mm 650 mm 1385105
Heat transmission from the solar collectors to
the solar buffer storage cylinder via a tube heat
exchanger located inside the storage cylinder.
Insulations for item no. 1385105 The potable water is heated externally via the
stations "Regumaq X-30/XZ-30".
Energy efficiency class: Max. operating pressure ps: 3 bar, (coil 10 bar)
Max. operating temperature ts: 95 C,
A 2070 mm 980 mm 1387606 (coil 110 C)
C 1820 mm 950 mm 1387106
Energy efficiency class label is only valid for
item no. 1385105 with 1387606.
Storage cylinder with insulation
(corresponds to energy efficiency class C)
Type
800 1775 mm 1090 mm 1385107

1000 2058 mm 1090 mm 1385110
"Hydrocor - WB" Potable water storage cylinder Potable water storage cylinder for the
Bivalent potable water storage cylinder with internal heat exchanger connection of different heat generators (e.g.
for solar heating and after-heating solar, heat pump or classic boilers).
Suitable for the following stations:
Type "Regusol", "Regusol E".
Solar potable water storage cylinder with two
Energy efficiency class B internal tube heat exchangers. Heat
transmission from the solar collectors to the
300 1900 mm 650 mm 1387303 potable water storage cylinder via a tube heat
exchanger located inside the storage cylinder.
Energy efficiency class C A boiler for after-heating can for instance be
connected to the upper tube heat exchanger.
300 1834 mm 600 mm 1385303 Max. operating pressure ps solar return/solar
500 1961 mm 700 mm 1385305 supply/heating return/heating supply: 10 bar
Max. operating temperature ts solar return/solar
supply/heating return/heating supply:
110/95 C
Stations for hot potable water preparation "Regumaq X-30/ XZ-30/ XH/ X-80": Page 6.100

Storage cylinders Storage cylinder dimensions/connections
Technical data:
Energy efficiency
Buffer storage cylinder Hydrocor HP class A
Type 800 1000 1500 500
H Total height mm 1775 2058 2097 2070
D Diameter (without insulation) mm 790 790 1000 650
Diameter (with insulation) mm 1090 1090 1300 980
Nominal content l 739 895 1400 475
Volume in stand-by motion l 270 325 470 183
Max. pivot height (without insulation) mm 1810 2100 2135 1770
Thickness of storage cylinder insulation (fibre fleece) mm 160 160 160 160**
Permissible operating pressure bar 3 3 3 3
Permissible operating temperature C 95 95 95 95
Weight (including insulation) kg approx. 122 approx. 134 approx. 206 approx. 85
Solar buffer storage cylinder Hydrocor-HS

Type 500 800 1000 500
H Total height mm 1720 1775 2058 2070
D Diameter (without insulation) mm 650 790 790 650
Diameter (with insulation) mm 950 1090 1090 980
Nominal content l 475 706 839 475
Volume in stand-by motion l 183 270 325 183
Content solar heating coil l 15.9 20 22.9 15.9
Max. pivot height (without insulation) mm 1770 1800 2100 1770
Thickness of storage cylinder insulation (fibre fleece) mm 160 160 160 160**
Permissible operating pressure bar 3 3 3 3
Permissible operating pressure (coil) bar 10 10 10 10
10
Permissible operating temperature C 95 95 95 95
Permissible operating temperature (coil) C 110 110 110 110
Solar heating coil m2 2.4 3.1 3.4 2.4
Weight (including insulation) kg approx. 128 approx. 166 approx. 186 approx. 130
Energy efficiency
Bivalent solar storage cylinder Hydrocor-WB class A
Type 300 500 300
H Total height mm 1834 1961 1900
Diameter (without insulation) mm 500 600 500
D Diameter (with insulation) mm 600 700 650
Nominal content l 293 470 293
Volume in stand-by motion l 132 184 132
Content solar heating coil l 9.8 13.1 9.5
Content heating coil l 5.8 8.9 5.8
Max. pivot height mm 1892 2044 1800
Thickness of storage cylinder insulation (polyurethane rigid foam)* mm 50 50 50
Permissible operating temperature potable water C 95 95 95
Permissible operating temperature
(solar return/solar supply/heating return/heating supply) C 110 110 110
Permissible operating pressure potable water bar 10 10 10
Permissible operating pressure
(solar return/solar supply/heating return/heating supply) bar 16 16 16
Solar heating coil (solar return/solar supply) m2 1.55 1.9 1.55
Heating coil (heating return/heating supply) m2 0.8 1.3 0.8
Weight (including insulation) kg approx. 106 approx. 160 approx. 120
* Insulation (polyurethane rigid foam) cannot be removed.
** Compound insulation
For further information see Technical information.
2017 10.19
Storage cylinders Accessories
Accessories
Insulation cap Insulation cap made of expanded

polypropylene for buffer and solar buffer
for G 1 connection sleeves 1389001 storage cylinders. For thermal insulation of
unused connections.
Uncontrolled immersion heater for direct

Electrical immersion heater 1383590 heating and warming up of the heating water in
hot water storage cylinders, for instance in the
Capacity (P): 9 kW
Urequired: 400 V
Housing with integrated controller and limiter

Controller for electrical 1383591 combination.
immersion heater
Controlled immersion heater for direct heating

Controlled immersion heater 1383594 and warming up of the heating water in hot
water storage cylinders, for instance in the
10 Capacity (P): 9 kW
Urequired: 400 V
Consisting of immersion heater with controller/
limiter combination.
25 C - 70 C
Retaining and fixing set 1389090 For fixing a potable water station
"Regumaq X/XZ" "Regumaq X/XZ" to a buffer storage
cylinder "Hydrocor - HP/HS".
Storage cylinder connection set 1381185 For the hydronic connection of a potable water
"Regumaq X/XZ" station "Regumaq X/XZ" fixed at a buffer
storage cylinder "Hydrocor - HP/HS".
Suitable buffer storage cylinders

"Hydrocor - HP/HS":
page 10.18
Extension for loading nipple 1383593 Extension for passing the loading nipple
through the insulation.
Extension for electrical immersion heater 1383592 Extension for passing the electrical immersion
heater through the insulation.
"Hydrocor" Storage cylinders: Page 10.18

Connection system "Combi-System" Content
Page
11.a "Copipe", "Copex" and "Copert" pipes

Content 11.05
"Copipe HSC" Composition pipe 11.06
"Copipe HS" Composition pipe 11.08
"Copex" PE-Xc Plastic pipe 11.10
"Copert" PE-RT Plastic pipe 11.10
11.b "Cofit P" Press connection system (bronze)

Content 11.11
"Cofit P" Press fittings 11.12
"Cofit P" Press elbows 11.14
"Cofit P" Press T-pieces 11.15
"Cofit P" Wall mounted connection pieces with press connection 11.19
11.c "Cofit PD" Press connection system

Content 11.21
"Cofit PD" Press fittings 11.22
"Cofit PD" Press elbows 11.23
"Cofit PD" Press T-pieces 11.24
"Cofit PD" Wall mounted connection pieces with press connection 11.26
11.d "Cofit PDK" Press connection system

(plastic, pressing must be carried out to tighten the connection) 11
Content 11.29
"Cofit PDK" Press fittings 11.30
11.e "Cofit S" Screwed connection system

Content 11.31
"Cofit S" Compression fittings, female thread 11.32
DVG W
"Cofit S" Nipples 11.32
OV
"Cofit S" Connection pieces 11.32

"Cofit S" Screwed fittings 11.33
"Cofit S" Wall mounted connection pieces 11.35
"Cofit S" Brackets with wall mounted connection pieces 11.35
"Multidis R" Sanitary distributor 11.36
Accessories 11.36
"Multidis R" Sanitary distributor with isolating facility 11.36
Accessories 11.36
11.f Fixing material and accessories for pipes

Content 11.37
Fixing material 11.38
Accessories 11.38
2017 11.01
Connection system "Combi-System" Content
Page
11.g Tools
Content 11.39
Tools 11.40
Press tools 11.43
Accessories 11.44
11.h "Copex HT" PE-Xc Plastic pipe

Content 11.45
"Copex HT" PE-Xc Plastic pipe 11.46
11.i "Cofit PD-HT" Press connection system

Content 11.47
"Cofit PD-HT" Press fittings made of bronze 11.48
"Cofit PDK-HT" Press fittings made of plastic (PPSU) 11.50
Tools 11.51
11
11.02 2017
Connection system "Combi-System" Summary pipes and fittings "Combi-System"
Pipe summary Application Approval Fitting summary
Cofit Cofit Cofit

Surface heating Cofit S
Central heating Cofit P Cofit PD PD-HT
and cooling PDK Brass + PDK-HT
systems Bronze Bronze Brass +
systems Plastic bronze Plastic
bronze
X X
14 x 2 mm X only double nipple
16 x 2 mm X X X X X
Copex
PE-Xc X
17 x 2 mm X X
only double nipple
plastic pipes
with oxygen X
20 x 2 mm X X
barrier only double nipple
20 x 2.5 mm X X X X X X
26 x 3 mm X X X X
12 x 2 mm X
Copert X
14 x 2 mm X only double nipple
X
PE-RT
plastic pipes 16 x 2 mm X X X X X
with oxygen
X
barrier 17 x 2 mm X X
only double nipple
20 x 2 mm X X X
Copipe HSC 14 x 2 mm X X DVGW X

PE-RT/AL/
16 x 2 mm X X DVGW X X X X
PE-RT
composition 20 x 2.5 mm X X DVGW X X X X
pipes 26 x 3.0 mm X X DVGW X X X
H: Heating systems
S: Sanitary installations 32 x 3.0 mm X X DVGW X X
C: Cooling systems 40 x 3.5 mm X X DVGW X
14 x 2.0 mm X X DVGW X
16 x 2.0 mm X X DVGW X X X X
Copipe HS 18 x 2.0 mm X X DVGW X
PE-Xc/AL/
PE-RT 20 x 2.5 mm X X DVGW X X X X
composition
pipes
26 x 3.0 mm X X DVGW X X X X
11
32 x 3.0 mm X X DVGW X X
H: Heating systems
S: Sanitary installations 40 x 3.5 mm X X DVGW X
Copex HT 16 x 2.2 mm X X X
PE-Xc
plastic pipes 20 x 2.8 mm X X X
with oxygen 25 x 3.5 mm X X
barrier
T: thick walled 32 x 4.4 mm X X
Fittings: Additional letters: P: Press connection

PD: Press connection / Drop (designed not to seal in an uncompressed condition)
PDK: Press connection / Drop (designed not to seal in an uncompressed condition) / Plastic
HT: High temperature
S: Screwed connection
2017 11.03
Connection system "Combi-System" 11.a "Copipe", "Copex" and "Copert" pipes
Page

Content
"Copipe HSC" Composition pipe 11.06
"Copipe HS" Composition pipe 11.08
"Copex" PE-Xc Plastic pipe 11.10
"Copert" PE-RT Plastic pipe 11.10
11
2017 11.05
Connection system "Combi-System" "Copipe HSC" Composition pipe
Packing
unit
"Copipe HSC" Composition pipe Application:

PE-RT/AL/PE-RT Central heating systems with circulation
white pump, surface heating and cooling systems
as well as sanitary installations.
for press connection systems "Cofit P/PD/PDK" and
screwed connection system "Cofit S" DVGW tested (dimension 14 x 2.0 mm).
DVGW approved (dimension 16 x 2.0 mm
rolls and above).
DVGW reg.-no. DW-8501AT2407.
Dimension 14 x 2 mm
Max. operating pressure ps: 6 bar at 90 C
length per roll 50 m (50) 1541054 ps: 10 bar at 70 C
length per roll 200 m (200) 1540254 Diffusion tight three-layered composition pipe
- inner layer made of PE-RT
- aluminium pipe welded end to end
Dimension 16 x 2 mm - outer coating made of PE-RT
bonded by adhesive layers.
length per roll 100 m (100) 1540155 Pipework has to be insulated according to the
length per roll 200 m (200) 1540255 valid laws, decrees, standards and guidelines.
Suitable insulation material to be obtained from
specialist stores.


11
with 4 mm insulation Pipe with 4 mm insulation layer for the
length per roll 50 m installation of cold water pipes according to
DIN 1988.
Dimension 16 x 2.0 mm (50) 1541155
Dimension 20 x 2.5 mm (50) 1541160

DIN 1988.
Dimension 16 x 2.0 mm (50) 1541355
Dimension 20 x 2.5 mm (50) 1541360
with 9 mm insulation Pipe with 9 mm insulation layer for insulation

length per roll 50 m requirements according to the German Energy
Saving Directive (EnEV) and DIN 1988.
Dimension 16 x 2.0 mm (50) 1541455
Dimension 20 x 2.5 mm (50) 1541460
in protective tube (corrugated pipe) The black corrugated pipe made of

length per roll 50 m polyethylene offers an additional protection
against damage and UV rays.
Dimension 14 x 2.0 mm (50) 1541254
Dimension 16 x 2.0 mm (50) 1541255
Dimension 20 x 2.5 mm (50) 1541260
11.06 2017
Connection system "Combi-System" "Copipe HSC" Composition pipe
Packing
unit
rods Fire protection:

length: 5 m Tested fire protection systems of the Fire
Resistance Regulations Class R90 for "Copipe
Dimension 16 x 2.0 mm (5) 1541555 HSC" composition pipes are available from
12 lengths specialist stores:
Dimension 20 x 2.5 mm (5) 1541560
10 lengths Fire protection tape Curaflam of the
Dimension 26 x 3.0 mm (5) 1541566 company Doyma
9 lengths Pipe coating Conlit 150 u and continuing
Dimension 32 x 3.0 mm (5) 1541572 insulation shell Rockwool 800
6 lengths
Dimension 40 x 3.5 mm (5) 1541584 Awards:
4 lengths
Pragotherm, Prague
11
2017 11.07
Connection system "Combi-System" "Copipe HS" Composition pipe
Packing
unit
"Copipe HS" Composition pipe Application:

PE-Xc/AL/PE-Xb Central heating systems with circulation
white pump, surface heating and cooling systems
as well as sanitary installations.
for press connection systems "Cofit P/PD/PDK" and Max. operating pressure ps: 10 bar at 95 C
screwed connection system "Cofit S" 16 bar (PN 16) for cold water
rolls DVGW reg. no. DW-8501AT2407
Dimension 14 x 2.0 mm Diffusion tight three-layered composition pipe

inner layer made of crosslinked polyethylene
length per roll 50 m (50) 1501054 aluminium pipe welded end to end
length per roll 100 m (100) 1500154 outer layer made of crosslinked polyethylene
length per roll 200 m (200) 1500254 bonded by special layers.
When used in combination with the press

fittings "Cofit P", the composition pipe "Copipe
HS", dimension 16-63, is licensed according to
length per roll 50 m (50) 1501055 German Lloyd for shipbuilding.
length per roll 200 m (200) 1500255 Pipework must be insulated according to the
length per roll 500 m (500) 1500555 valid laws, decrees, standards and regulations.
Suitable insulation material available from

specialist stores.

11 Dimension 32 x 3.0 mm

DIN 1988.
Dimension 16 x 2.0 mm (50) 1501155
Dimension 20 x 2.5 mm (50) 1501160

DIN 1988.
Dimension 16 x 2.0 mm (50) 1501355
Dimension 20 x 2.5 mm (50) 1501360
with 9 mm insulation Pipe with 9 mm insulation layer for insulation

length per roll 50 m requirements according to the German Energy
Saving Directive (EnEV) and DIN 1988.
Dimension 16 x 2.0 mm (50) 1501455
Dimension 20 x 2.5 mm (50) 1501460
in protective tube (corrugated pipe) The black corrugated pipe made of

length per roll 50 m polyethylene offers an additional protection
against damage and UV rays.
Dimension 14 x 2,0 mm (50) 1501254
Dimension 16 x 2.0 mm (50) 1501255
Dimension 20 x 2.5 mm (50) 1501260
11.08 2017
Connection system "Combi-System" "Copipe HS" Composition pipe
Packing
unit
rods Fire protection:

Tested fire protection systems of the Fire
length: 5 m Resistance Regulations Class R90 for "Copipe
HS" composition pipes are available from
Dimension 16 x 2.0 mm (5) 1501555 specialist stores:
20 lengths
dimension 20 x 2.5 mm (5) 1501560 - Fire protection tape Curaflam of the company
13 lengths Doyma
Dimension 26 x 3.0 mm (5) 1501566 - Pipe coating Conlit 150 and continuing
7 lengths insulation shell Rockwool 800
Dimension 32 x 3.0 mm (5) 1501572
5 lengths Awards:
Dimension 40 x 3.5 mm (5) 1501580
Pragotherm, Prague
9 lengths
Dimension 50 x 4.5 mm (5) 1501582
4 lengths
Dimension 63 x 6.0 mm (5) 1501584
3 lengths
11
2017 11.09
"Copex" PE-Xc Plastic pipe
Connection system "Combi-System" "Copert" PE-RT Plastic pipe
Packing
unit
"Copex" PE-Xc Plastic pipe Application:

with oxygen barrier Central heating systems, surface heating
and cooling systems.
for press connection systems "Cofit P/PD/PDK" and
screwed connection system "Cofit S" Pipes according to DIN 16892 / DIN 16893 /
DIN EN ISO 15 875 / EN 1264-4 (except for
rolls dimensions 26 and 32). Oxygen tight according
to DIN 4726 (all dimensions).

6 bar at 90 C

6 bar at 90 C
Dimension 20 x 2.5 mm Max. operating pressure ps:

8 bar at 90 C

6 bar at 90 C
11 length per roll 200 m (200) 1400562
10 bar at 60 C

6 bar at 90 C
10 bar at 20 C
"Copert" PE-RT Plastic pipe Application:

with oxygen barrier Surface heating and cooling systems.
for press connection systems "Cofit P/PD/PDK" and Pipes according to DIN 16833/DIN 16834.
screwed connection system "Cofit S" Oxygen tight according to DIN 4726.
rolls Max. operating pressure ps: 6 bar at 70 C
Dimension 14 x 2 mm

Dimension 16 x 2 mm

11.10 2017
Connection system "Combi-System" 11.b "Cofit P" Press connection system (bronze)
Page

Content
"Cofit P" Press elbows 11.14
"Cofit P" Press T-pieces 11.15
"Cofit P" Wall mounted connection pieces with press connection 11.19
11
2017 11.11
Connection system "Combi-System" "Cofit P" Press fittings
Packing
unit
"Cofit P" Press fittings Universal application for heating and

bronze, dimension 40, 50 and 63 mm cooling systems and sanitary installations.
made of brass,
stainless steel casing, Approvals:
for composition pipe "Copipe" DVGW for all dimensions.
ATEC, CSTBat and NORM up to dimension
Press connection with male thread 40.
unplated
For valves and fittings with female thread.
16 x 2.0 mm xR (10) 1512043
16 x 2.0 mm xR (10) 1512044
20 x 2.5 mm xR (10) 1512045
20 x 2.5 mm xR (10) 1512046
20 x 2.5 mm xR (10) 1512047
26 x 3.0 mm xR (5) 1512048
26 x 3.0 mm xR1 (5) 1512049
32 x 3.0 mm xR1 (5) 1512051
40 x 3.5 mm x R 1 (5) 1512054
50 x 4.5 mm x R 1 1512056
63 x 6.0 mm xR2 1512057
Press connection with collar nut With flat seal.

unplated For instance for flat sealing Oventrop valves
and fittings.
16 x 2.0 mm x G c/nut (10) 1512141
16 x 2.0 mm x G c/nut (10) 1512143
20 x 2.5 mm x G c/nut (10) 1512144
20 x 2.5 mm x G c/nut (10) 1512145
26 x 3.0 mm x G c/nut (5) 1512146
26 x 3.0 mm x G 1 c/nut (5) 1512147
32 x 3.0 mm x G 1 c/nut (5) 1512148
32 x 3.0 mm x G 1 c/nut (5) 1512149
40 x 3.5 mm x G 1 c/nut (5) 1512151
50 x 4.5 mm x G 1 c/nut 1512156
63 x 6.0 mm x G 2 c/nut 1512157
11
Press connection with female thread For changing over to different pipe material and
for valves and fittings with male threaded
16 x 2.0 mm x Rp (10) 1512243 connection for sealing.
20 x 2.5 mm x Rp (10) 1512245
20 x 2.5 mm x Rp (10) 1512246 For further information see
26 x 3.0 mm x Rp (5) 1512247 "Technical information":
26 x 3.0 mm x Rp 1 (5) 1512248
32 x 3.0 mm x Rp 1 (5) 1512249
40 x 3.5 mm x Rp 1 (5) 1512252
50 x 4.5 mm x Rp 1 1512256
63 x 6.0 mm x Rp 2 1512257
Press coupling
16 x 2 mm x 16 x 2 mm (10) 1512543
20 x 2.5 mm x 20 x 2.5 mm (10) 1512545
26 x 3 mm x 26 x 3 mm (5) 1512546
32 x 3 mm x 32 x 3 mm (5) 1512547
40 x 3.5 mm x 40 x 3.5 mm (5) 1512548
50 x 4.5 mm x 50 x 4.5 mm 1512549
63 x 6 mm x 63 x 6 mm 1512550
11.12 2017
Packing
unit
Press reducing coupling
20 x 16 mm (10) 1512655
26 x 16 mm (5) 1512656
26 x 20 mm (5) 1512657
32 x 20 mm (5) 1512659
32 x 26 mm (5) 1512660
40 x 20 mm (5) 1512662
40 x 26 mm (5) 1512663
40 x 32 mm (5) 1512664
50 x 40 mm 1512665
50 x 32 mm 1512666
63 x 40 mm 1512668
63 x 50 mm 1512669
Press connection coupling For changing over from copper press systems
and stainless steel press systems to
16 x 2.0 mm x 10 mm (10) 1514041 composition pipe "Copipe".
16 x 2.0 mm x 12 mm (10) 1514042 Not suitable for solder connection.
16 x 2.0 mm x 14 mm (10) 1514040
16 x 2.0 mm x 15 mm (10) 1514043 For further information see
16 x 2.0 mm x 16 mm (10) 1514044 "Technical information":
20 x 2.5 mm x 15 mm (10) 1514054
20 x 2.5 mm x 16 mm (10) 1514055
20 x 2.5 mm x 18 mm (10) 1514045
20 x 2.5 mm x 22 mm (10) 1514046
26 x 3.0 mm x 22 mm (5) 1514047
11
2017 11.13
Connection system "Combi-System" "Cofit P" Press elbows
Packing
unit
"Cofit P" Press elbows Universal application for heating and

bronze, cooling systems and sanitary installations.
stainless steel casing,
for composition pipe "Copipe" Approvals:
DVGW for all dimensions.
Press connection elbow with male thread ATEC, CSTBat and NORM up to dimension
40.
16 x 2.0 mm xR (10) 1512343
16 x 2.0 mm xR (10) 1512344 Male thread for sealing according to EN 10226.
20 x 2.5 mm xR (10) 1512345
20 x 2.5 mm xR (10) 1512358
20 x 2.5 mm xR (10) 1512346
26 x 3.0 mm xR (5) 1512347
26 x 3.0 mm xR1 (5) 1512357
32 x 3.0 mm xR1 (5) 1512348 Dimension:
40 x 3.5 mm x R 1 (5) 1512349 40 mm made of brass.
Press connection elbow with female thread Female thread for sealing according to DIN EN
10226.
16 x 2.0 mm x Rp (10) 1512443
20 x 2.5 mm x Rp (10) 1512445
20 x 2.5 mm x Rp (10) 1512446
26 x 3.0 mm x Rp (5) 1512447
26 x 3.0 mm x Rp 1 (5) 1512448
32 x 3.0 mm x Rp 1 (5) 1512449 Dimension:
50 x 4.5 mm x Rp 1 1512456 50 mm made of brass.
Press angle pattern fitting with female thread For instance for the connection of the
composition pipe "Copipe" to hot water
20 x 2.5 mm x Rp (5) 1512745 storage cylinders.
26 x 3.0 mm x Rp 1 (5) 1512747
Press connection elbow With flat seal.

with collar nut
11 For instance for flat sealing Oventrop valves
and fittings.
16 x 2.0 mm xG (10) 1512751
16 x 2.0 mm xG (10) 1512752
16 x 2.0 mm xG (10) 1512753
20 x 2.5 mm xG (10) 1512755
26 x 3.0 mm xG (5) 1512757
Press elbow 90
16 x 16 mm (10) 1512843
20 x 20 mm (10) 1512845
26 x 26 mm (5) 1512847
32 x 32 mm (5) 1512849 Dimension:
40 x 40 mm (5) 1512851 40 mm made of brass.
50 x 50 mm 1512852 50 mm made of brass.
Press elbow 45
32 x 32 mm (5) 1512949 Dimension:

40 x 40 mm (5) 1512951 40 mm made of brass.

11.14 2017
Connection system "Combi-System" "Cofit P" Press T-pieces
Packing
unit
"Cofit P" Press T-pieces Universal application for heating and

bronze, cooling systems and sanitary installations.
for composition pipe "Copipe" Approvals:
DVGW for all dimensions.
Press T-piece ATEC, CSTBat and NORM up to dimension
40.
16 x 16 x 16 mm (10) 1513043
20 x 20 x 20 mm (10) 1513045
26 x 26 x 26 mm (5) 1513046
32 x 32 x 32 mm (5) 1513047 Dimension:
40 x 40 x 40 mm (5) 1513048 40 mm made of brass.
50 x 50 x 50 mm 1513049 50 mm made of brass.
Press T-piece, reduced central port
20 x 16 x 20 mm (10) 1513155
26 x 16 x 26 mm (5) 1513156
26 x 20 x 26 mm (5) 1513157
32 x 16 x 32 mm (5) 1513158
32 x 20 x 32 mm (5) 1513159
32 x 26 x 32 mm (5) 1513160 Dimension:
Press T-piece, reduced straight port
20 x 20 x 16 mm (10) 1513255
26 x 26 x 20 mm (5) 1513257
11
Press T-piece, reduced central and straight port
20 x 16 x 16 mm (10) 1513354
26 x 16 x 20 mm (5) 1513356
26 x 20 x 20 mm (5) 1513358
32 x 20 x 26 mm (5) 1513361 Dimension:
Press T-piece, enlarged central port
16 x 20 x 16 mm (10) 1513454
20 x 26 x 20 mm (5) 1513457
26 x 32 x 26 mm (5) 1513460
2017 11.15
Connection system "Combi-System" "Cofit P" Press T-pieces
Packing
unit
Press connection T-piece with female thread Female thread for sealing according to DIN EN
10226.
16 x Rp x 16 mm (10) 1513643
20 x Rp x 20 mm (10) 1513645
26 x Rp x 26 mm (5) 1513647
26 x Rp x 26 mm (5) 1513648
32 x Rp x 32 mm (5) 1513649
32 x Rp 1 x 32 mm (5) 1513651 Dimension:
40 x Rp x 40 mm (5) 1513652 40 mm made of brass.
40 x Rp 1 x 40 mm (5) 1513655
50 x Rp 1 x 50 mm 1513656 50 mm made of brass.
63 x Rp 1 x 63 mm 1513658 63 mm made of brass.

11
11.16 2017
Packing
unit
"Cofit P" Press fittings Application:

stainless steel casing, Central heating systems with circulation
for composition pipe "Copipe" pump
and cooling systems.
Press connection with male thread Max. pressure and temperature:
bronze, nickel plated 10 bar, 95 C.
For valves and radiator lockshield valves
16 x 2.0 mm x R (10) 1512062 "Combi 2, 3 and 4" as well as nickel plated
16 x 2.0 mm x R (10) 1512063 valves and fittings of other manufacturers
20 x 2.5 mm x R (10) 1512065 with Rp female thread.
Press connection with collar nut With spherical sealing surface.

bronze, nickel plated Metal to metal seal against tapered surface, for
instance for Oventrop distributors/collectors as
16 x 2.0 mm x G c/nut (10) 1512163 well as valves and controls with G
20 x 2.5 mm x G c/nut (10) 1512165 compression connection.
brass resistant to dezincification, nickel plated With flat seal.

For instance for flat sealing Oventrop valves
16 x 2.0 mm x G c/nut (10) 1512171 and fittings.
16 x 2.0 mm x G c/nut (10) 1512172
Cross fitting with press connection With insulation box.

brass, unplated
OV
16 x 16 mm x 16 mm 1514653
20 x 16 mm x 16 mm 1514654
20 x 16 mm x 20 mm 1514655
Pressure test plug with deaeration Max. pressure 20 bar.

brass
Set = 10 pieces, for composition pipe "Copipe"
16
20
x 2.0 mm
x 2.5 mm
(10)
(10)
1506085
1506087
11
26 x 3.0 mm (10) 1506088
32 x 3.0 mm (10) 1506089
Radiator connection block For simple radiator connection.

with composition pipe "Copipe" 16 x 2.0 mm
insulation made of expanded polystyrene
(10) 1015645
"Multimodul" Radiator connection
1015651
Radiator connection T-piece Height = 300 mm.

nickel plated, Copper pipe: 15 x 1.0 mm,
pipe made of copper, fitting made of brass Suitable compression fittings
for composition pipe "Copipe" for instance item no. 1027443.
Valid for item no. 1515143, 1515146
16 x 2.0 mm (10) 1515143 and 1515243.
20 x 2.5 mm (10) 1515146
16 x 2.0 mm (10) 1515144 Height: 750 mm
2017 11.17
Packing
unit
Radiator connection elbow For further information see

nickel plated, "Technical information":
pipe made of copper, fitting made of brass
for composition pipe "Copipe"
16 x 2.0 mm (10) 1515243
16 x 2.0 mm (10) 1515244 Height: 750 mm
Fixing set
for radiator connection elbow
(10) 1515290
11
11.18 2017
"Cofit P" Wall mounted connection pieces with press
Connection system "Combi-System" connection
Packing
unit
"Cofit P" Wall mounted connection pieces with press connection Approvals:
bronze, DVGW for all dimensions.
stainless steel casing, ATEC, CSTBat and NORM up to
for composition pipe "Copipe" dimension 40.
For the connection of apparatus, valves and
Wall mounted connection piece with press connection, fittings.
90, short model Fixing and insulating material available from
specialist stores.
16 x 2.0 mm x Rp (10) 1517053
20 x 2.5 mm x Rp (10) 1517055
20 x 2.5 mm x Rp (10) 1517056
Wall mounted connection piece with press connection,

90 , long model
16 x 2.0 mm x Rp (10) 1517043

20 x 2.5 mm x Rp (10) 1517045
Sound absorbing set (10) 1518070 For wall mounted connection pieces item no.
1517043/45.
(10) 1518074 For wall mounted connection pieces item no.
1517053/55/56.

angle pattern
16 x 16 mm x Rp (10) 1517143
20 x 20 mm x Rp (10) 1517145

straight pattern
16 x 16 mm x Rp (10) 1517243 For long model.

20 x 20 mm x Rp (10) 1517245
16
20
x 16 mm
x 20 mm
x Rp
x Rp
(10)
(10)
1517253
1517255
For short model. 11
Wall traverse with press connection, 90
with fixing set G
16 x 2.0 mm x Rp (10) 1517343

20 x 2.5 mm x Rp (10) 1517345
Flush-mounted elbow for cisterns with press connection

with fixing set G
16 x 2.0 mm x Rp (10) 1517443
Press connection with female thread For flush mounting, for instance for outdoor
with locking device taps.

2017 11.19
"Cofit P" Wall mounted connection pieces with press
Connection system "Combi-System" connection
Packing
unit
Brackets
with wall mounted connection pieces,
short model and sound insulation
Wall mounted Gauge for
connection piece bore holes
16 x 2.0 mm x Rp 153 mm (5) 1518183 With flat bracket.

16 x 2.0 mm x Rp 80 mm (5) 1518184
16 x 2.0 mm x Rp 100 mm (5) 1518185
16 x 2.0 mm x Rp 153 mm (5) 1518186 With cranked bracket.

20 x 2.5 mm x Rp 153 mm (5) 1518187
16 x 2.0 mm x Rp 80 mm (5) 1518188
16 x 2.0 mm x Rp 100 mm (5) 1518189
with wall mounted connection pieces, With cranked bracket.

long model with sound insulation
16 x 2.0 mm x Rp 80 mm (5) 1518198

16 x 2.0 mm x Rp 100 mm (5) 1518199
16 x 2.0 mm x Rp 153 mm (5) 1518196

20 x 2.5 mm x Rp 153 mm (5) 1518197
Pressure test plug For further information see

plastic, self sealing "Technical information":
GM (50) 1506092
11
11.20 2017
Connection system "Combi-System" (bronze, pressing must be carried out to tighten the connection)
Page

Content
"Cofit PD" Press elbows 11.23
"Cofit PD" Press T-pieces 11.24
"Cofit PD" Wall mounted connection pieces with press connection 11.26
11
2017 11.21
Connection system "Combi-System" "Cofit PD" Press fittings
Packing
unit
"Cofit PD" Press fittings Universal application for heating and

designed not to seal cooling systems and sanitary installations.
in an uncompressed condition,
bronze, Approval: DVGW
stainless steel casing, Dimension 26: DVGW in preparation
Press connection with male thread For valves with female threaded connection.
unplated
16 x 2.0 mm xR (10) 1532043

16 x 2.0 mm xR (10) 1532044
20 x 2.5 mm xR (10) 1532045
20 x 2.5 mm xR (10) 1532046
20 x 2.5 mm xR (10) 1532047
26 x 3.0 mm xR (5) 1532048
26 x 3.0 mm xR1 (5) 1532049
Press connection with collar nut With flat seal.

unplated For instance for flat sealing Oventrop valves
and fittings.
16 x 2.0 mm x G c/nut (10) 1532141
16 x 2.0 mm x G c/nut (10) 1532143
20 x 2.5 mm x G c/nut (10) 1532144
20 x 2.5 mm x G c/nut (10) 1532145
26 x 3.0 mm x G 1 c/nut (5) 1532147
Press connection with female thread For changing over to different pipe material
and for valves and fittings with male
16 x 2.0 mm x Rp (10) 1532243 threaded connection for sealing.
20 x 2.5 mm x Rp (10) 1532245
20 x 2.5 mm x Rp (10) 1532246
26 x 3.0 mm x Rp (5) 1532247
26 x 3.0 mm x Rp 1 (5) 1532248
11 Press coupling
16 x 2 mm x 16 x 2 mm (10) 1532543
20 x 2.5 mm x 20 x 2.5 mm (10) 1532545
26 x 3 mm x 26 x 3 mm (5) 1532546
20 x 16 mm (10) 1532655
26 x 16 mm (5) 1532656
26 x 20 mm (5) 1532657
Press connection coupling For changing over from copper press

systems and stainless steel press systems
16 x 2.0 mm x 10 mm (10) 1534041 to composition pipe Copipe.
16 x 2.0 mm x 12 mm (10) 1534042 Not suitable for solder connection.
16 x 2.0 mm x 14 mm (10) 1534040
16 x 2.0 mm x 15 mm (10) 1534043
16 x 2.0 mm x 16 mm (10) 1534044
20 x 2.5 mm x 15 mm (10) 1534054
20 x 2.5 mm x 18 mm (10) 1534045
20 x 2.5 mm x 22 mm (10) 1534046
26 x 3.0 mm x 22 mm (5) 1534047
11.22 2017
Connection system "Combi-System" "Cofit PD" Press elbows
Packing
unit
"Cofit PD" Press elbows Universal application for heating and

Press connection elbow with male thread Male thread for sealing according to EN 10226.
16 x 2.0 mm xR (10) 1532343 For further information see

16 x 2.0 mm xR (10) 1532344 "Technical information":
20 x 2.5 mm xR (10) 1532345
20 x 2.5 mm xR (10) 1532346
20 x 2.5 mm xR (10) 1532358
26 x 3.0 mm xR (5) 1532347
26 x 3.0 mm xR1 (5) 1532357
Press connection elbow with female thread Female thread for sealing according to
EN 10226.
16 x 2.0 mm x Rp (10) 1532443
20 x 2.5 mm x Rp (10) 1532445
20 x 2.5 mm x Rp (10) 1532446
26 x 3.0 mm x Rp (5) 1532447
26 x 3.0 mm x Rp 1 (5) 1532448
Press angle pattern fitting with female thread For instance for the connection of the
composition pipe Copipe to hot water
20 x 2.5 mm x Rp (5) 1532745 storage cylinders.
Press connection elbow with collar nut With flat seal.

For instance for flat sealing Oventrop valves
16 x 2.0 mm x G c/nut (10) 1532751 and fittings. 11
16 x 2.0 mm x G c/nut (10) 1532752
16 x 2.0 mm x G c/nut (10) 1532753
20 x 2.5 mm x G c/nut (10) 1532755
26 x 3.0 mm x G c/nut (5) 1532757
Press elbow 90
16 x 16 mm (10) 1532843
20 x 20 mm (10) 1532845
26 x 26 mm (5) 1532847
2017 11.23
Connection system "Combi-System" "Cofit PD" Press T-pieces
Packing
unit
"Cofit PD" Press T-pieces Universal application for heating and

Press T-piece "Technical information":
16 x 16 x 16 mm (10) 1533043
20 x 20 x 20 mm (10) 1533045
26 x 26 x 26 mm (5) 1533046
20 x 16 x 20 mm (10) 1533155
26 x 16 x 26 mm (5) 1533156
26 x 20 x 26 mm (5) 1533157
Press T-piece, reduced straight port
20 x 20 x 16 mm (10) 1533255
26 x 26 x 20 mm (5) 1533257
20 x 16 x 16 mm (10) 1533354
26 x 16 x 20 mm (5) 1533356
26 x 20 x 20 mm (5) 1533358

11 16 x 20 x 16 mm (10) 1533454
20 x 26 x 20 mm (5) 1533457
Press connection T-piece with female thread Female thread for sealing according to
DIN EN 10226.
16 x Rp x 16 mm (10) 1533643
20 x Rp x 20 mm (10) 1533645
26 x Rp x 26 mm (5) 1533647
26 x Rp x 26 mm (5) 1533648
11.24 2017
Connection system "Combi-System" "Cofit PD" Press fittings
Packing
unit
"Cofit PD" Press fittings Application:

designed not to seal Central heating systems with circulation pump
in an uncompressed condition, and cooling systems.
for composition pipe "Copipe" Max. pressure and temperature:
10 bar, 95 C
Press connection with male thread For valves and radiator lockshield valves
brass resistant to dezincification, nickel plated Combi 2, 3 and 4 as well as nickel plated
valves and fittings with Rp female thread
16 x 2.0 mm xR (10) 1532062 of other manufacturers.
16 x 2.0 mm xR (10) 1532063
20 x 2.5 mm xR (10) 1532065
Press connection with collar nut With spherical sealing surface.

brass resistant to dezincification, nickel plated Metal to metal seal against tapered surface,
for instance for Oventrop distributors/
16 x 2.0 mm x G c/nut (10) 1532163 collectors as well as valves and controls
20 x 2.5 mm x G c/nut (10) 1532165 with compression connection G .
brass resistant to dezincification, nickel plated With flat seal.

For instance flat sealing Oventrop valves
16 x 2.0 mm x G c/nut (10) 1532171 and fittings.
16 x 2.0 mm x G c/nut (10) 1532172
20 x 2.5 mm x G 1 c/nut (10) 1532173
Cross fitting with press connection With insulation box.

brass, unplated
OV
16 x 16 x 16 mm 1534653
20 x 16 x 16 mm 1534654
20 x 16 x 20 mm 1534655 11
2017 11.25
Packing
unit
"Cofit PD" Wall mounted connection pieces with press Universal application for heating and
connection cooling systems and sanitary installations.
designed not to seal
in an uncompressed condition, Approval: DVGW
bronze, Dimension 26: DVGW in preparation
Wall mounted connection piece with press connection, Fixing and insulating material available from
90, short model specialist stores.
For the connection of apparatus, valves and
16 x 2.0 mm x Rp (10) 1537053 fittings.
20 x 2.5 mm x Rp (10) 1537055
20 x 2.5 mm x Rp (10) 1537056
Wall mounted connection piece with press connection, For further information see
90, long model "Technical information":
16 x 2.0 mm x Rp (10) 1537043

20 x 2.5 mm x Rp (10) 1537045
Sound absorbing set (10) 1518070 For wall mounted connection pieces item no.
1517043/45.
(10) 1518074 For wall mounted connection pieces item no.
1517053/55/56.

angle pattern
16 x 16 mm x Rp (10) 1537143
20 x 20 mm x Rp (10) 1537145
11
Wall mounted connection piece with press connection, U-shape
20 x 16 mm x Rp (10) 1537146
26 x 20 mm x Rp (10) 1537147
26 x 26 mm x Rp (10) 1537148
Sound absorbing set

for U-shaped wall mounting connection piece
1539946 For wall mounted connection piece item no.

1537146.
1539947 For wall mounted connection pieces item no.
1537147/ 48.

straight pattern
16 x 16 mm x Rp (10) 1537243 For long model.

20 x 20 mm x Rp (10) 1537245
16 x 16 mm x Rp (10) 1537253 For short model.
20 x 20 mm x Rp (10) 1537255
Wall traverse with press connection, 90

with fixing set G
16 x 2.0 mm x Rp (10) 1537343

20 x 2.5 mm x Rp (10) 1537345
11.26 2017
Packing
unit
Flush-mounted elbow for cisterns with press connection

with fixing set G
16 x 2.0 mm x Rp (10) 1537443
Press connection with female thread For flush mounting, for instance for outdoor
with locking device taps.

Brackets
with wall mounted connection pieces,
short model and sound insulation
16 x 2.0 mm x Rp 80 mm (5) 1538184 With flat bracket.

16 x 2.0 mm x Rp 100 mm (5) 1538185
16 x 2.0 mm x Rp 153 mm (5) 1538183
16 x 2.0 mm x Rp 153 mm (5) 1538186 With cranked bracket.

20 x 2.5 mm x Rp 153 mm (5) 1538187
16 x 2.0 mm x Rp 80 mm (5) 1538188
16 x 2.0 mm x Rp 100 mm (5) 1538189
with wall mounted connection pieces, With cranked bracket.

long model and sound insulation
For further information see 11
16 x 2.0 mm x Rp 80 mm (5) 1538198 "Technical information":
16 x 2.0 mm x Rp 100 mm (5) 1538199
16 x 2.0 mm x Rp 153 mm (5) 1538196

20 x 2.5 mm x Rp 153 mm (5) 1538197
2017 11.27
Connection system "Combi-System" (plastic, pressing must be carried out to tighten the connection)
Page

Content
"Cofit PDK" Press fittings 11.30
11
2017 11.29
Connection system "Combi-System" "Cofit PDK" Press fittings
Packing
unit
"Cofit PDK" Press fittings Universal application for heating and

plastic (PPSU) DVGW approval in preparation.
stainless steel casing
Press coupling
16 x 2 mm x 16 x 2 mm (10) 1522543
20 x 2.5 mm x 20 x 2.5 mm (10) 1522545
20 x 16 mm (10) 1522655
Press elbow 90
16 x 16 mm (10) 1522843
20 x 20 mm (10) 1522845
Press T-piece
16 x 16 x 16 mm (10) 1523043
20 x 20 x 20 mm (10) 1523045
20 x 16 x 20 mm (10) 1523155
11 Press T-piece, reduced straight port
20 x 20 x 16 mm (10) 1523255
20 x 16 x 16 mm (10) 1523354
16 x 20 x 16 mm (10) 1523454
11.30 2017
Connection system "Combi-System" 11.e "Cofit S" Screwed connection system
Page

Content
"Cofit S" Compression fittings, female thread 11.32
DVG W
"Cofit S" Nipples 11.32
OV
"Cofit S" Connection pieces 11.32

"Cofit S" Screwed fittings 11.33
"Cofit S" Wall mounted connection pieces 11.35
"Cofit S" Brackets with wall mounted connection pieces 11.35
"Multidis R" Sanitary distributor 11.36
Accessories 11.36
"Multidis R" Sanitary distributor with isolating facility 11.36
Accessories 11.36
11
2017 11.31
"Cofit S" Compression fittings, female thread
"Cofit S" Nipples
Connection system "Combi-System" "Cofit S" Connection pieces
Packing
unit
"Cofit S" Compression fittings Universal application for heating and

for G male thread according to DIN EN 16313 (cone "Euro") cooling systems and sanitary installations.
DVGW reg. no. DW-8501AT2407 For DVGW approved composition pipe
"Copipe" and PE-X plastic pipes for the same
Collar nut nickel plated dimension and same processing.
Installation instructions are to be followed.
14 x 2.0 mm x G c/nut (10) 1507954 For nickel plated valves, radiator lockshield
16 x 2.0 mm x G c/nut (10) 1507955 valves and other valves and fittings with
18 x 2.0 mm x G c/nut (10) 1507958 G male thread, with tapered seal and O-ring
20 x 2.5 mm x G c/nut (10) 1507960 seal.
Collar nut unplated For distributors and fittings installed in risers

and distributor pipes, with tapered seal and
14 x 2.0 mm x G c/nut (10) 1507974 O-ring seal.
16 x 2.0 mm x G c/nut (10) 1507975
20 x 2.5 mm x G c/nut (10) 1507980
26 x 3.0 mm x G 1 c/nut (10) 1507983
32 x 3.0 mm x G 1 c/nut (10) 1507985
"Cofit S" Compression fittings, female thread For Oventrop valves and radiator lockshield
outlet made of brass resistant to dezincification, valves with female thread Rp and
brass compression ring, compression nut made of nickel plated brass compression ends.
No sealing required.
14 x 2.0 mm x G male (10) 1507354 Not suitable for thermostatic valves "RF".
16 x 2.0 mm x G male (10) 1507355
"Cofit S" Nipples For the connection of composition pipes to

bronze valves and fittings with female thread
according to EN 10226.
nickel plated
R x G male thread (25) 1503161

11 unplated
DVGW reg. no. DW-8501AT2407

R xG1M (10) 1503155
R1 x G 1 M (10) 1503156
R1 xG1M (10) 1503157
"Cofit S" Connection pieces For the connection of the composition pipe
DVGW reg. no. DW-8501AT2407 "Copipe" to valves and fittings with male
bronze thread.
with flat seal
Award:
G female x G male thread (25) 1503053 Pragotherm, Prague
G female x G male thread (25) 1503054
G 1 female xG1M (10) 1503055
G 1 female x G 1 M (10) 1503056
11.32 2017
Connection system "Combi-System" "Cofit S" Screwed fittings
Packing
unit
"Cofit S" Screwed fittings Universal application for heating and

DVGW reg. no. DW-8501AT2407 cooling systems and sanitary installations.
bronze
for floor to floor distribution and risers When using compression fittings with G
collar nut, the screwed fittings are suitable for
Double nipple, bronze, unplated use on composition pipe, copper, precision
steel and plastic pipes.
G male thread x G male (25) 1504054
thread Tapered and cylindrical sealing surface for
G1M xG1M (10) 1504055 metal to metal and O-ring sealing.
G 1 M x G 1 M (10) 1504056
reduced
G1M x G male (10) 1504064

thread
G 1 M xG1M (10) 1504065
G 1 M x G male (10) 1504066
thread
Connection piece
G male thread x Rp (25) 1504153

G1M x Rp 1 (10) 1504155
G 1 M x Rp 1 (10) 1504156
T pieces
DVG W with male thread
a b c
OV
G xG xG (10) 1504554
G1 xG1 xG1 (10) 1504555
G 1 x G 1 x G 1 (5) 1504556
reduced 11
a b c
G xG1 xG (10) 1504552

G x G 1 xG (5) 1504553
G1 xG xG (10) 1504565
G1 xG xG1 (10) 1504564
G1 xG1 xG (10) 1504563
G1 x G 1 xG (5) 1504575
G1 x G 1 xG1 (5) 1504572
G 1 xG xG (5) 1504570
G 1 xG xG1 (5) 1504574
G 1 xG x G 1 (5) 1504568
G 1 xG1 xG (5) 1504573
G 1 xG1 xG1 (5) 1504567
G 1 xG1 x G 1 (5) 1504566
G 1 x G 1 xG (5) 1504569
G 1 x G 1 xG1 (5) 1504571
T-bridging piece To create junction points when using

with male thread the T-piece, item no. 1504554.
G xG xG (5) 1504754 For further information see

2017 11.33
Connection system "Combi-System" "Cofit S" Screwed fittings
Packing
unit
Cross connection piece

brass
G1 xG1 xG xG (10) 1505565

G 1 x G 1 x G x G (10) 1505566
G 1 xG1 xG xG (10) 1505567
Elbow 90
OV G male thread x G male (10) 1504454

thread
G1M xG1M (10) 1504455
G 1 M x G 1 M (10) 1504456
Connection elbow 90 To extend the sanitary distributor for one

connection.
OV
G1M x Rp 1 (10) 1504355
G 1 M x Rp 1 (5) 1504356
Connection elbow 90 For instance for the connection of

the composition pipe Copipe to
G male thread x R (10) 1504363 flush-mounted valves and fittings.

11
11.34 2017
"Cofit S" Wall mounted connection pieces
Connection system "Combi-System" "Cofit S" Brackets with wall mounted connection pieces
Packing
unit
"Cofit S" Wall mounted connection pieces For the connection of apparatus, valves and
DVGW reg. no. DW-8501AT2407 fittings.
bronze Fixing and insulating material available from
specialist stores.
Wall mounted connection piece

Wall mounted connection piece, angle pattern
G male x Rp x G male (25) 1506153

thread thread
Wall mounted connection piece, straight pattern
G male x Rp x G male (25) 1506253

thread thread
Wall traverse 90
with fixing set G

OV
Flush-mounted elbow for cisterns

with fixing set G
"Cofit S" Brackets with wall mounted connection pieces

11
G male x Rp 80 mm (10) 1506073 With flat bracket.

thread
G male x Rp 100 mm (10) 1506075 With flat bracket.

thread
OV
G male x Rp 80 mm (10) 1506176 With cranked bracket.
thread
G male x Rp 100 mm (10) 1506177
thread
G male x Rp 153 mm (10) 1506178
thread
Pressure test plug For further information see

plastic, self sealing "Technical information":
GM (50) 1506092
2017 11.35
"Multidis R" Sanitary distributor
Accessories
"Multidis R" Sanitary distributor with isolating facility
Connection system "Combi-System" Accessories
Packing
unit
"Multidis R" Sanitary distributor Tapered sealing surface for metal to metal and
bronze, self sealing O-ring sealing.
To be used in combination with "Cofit S" and
(2) 4200453 "Ofix" compression fittings as well as "Cofit P"
press connections with collar nut and spherical
sealing surface.
Accessories
Cap G female thread 1400692 To close outlets not in use.

(not illustr.)
Bracket with mounting clip. For mounting

Bracket (10) 4201071 the sanitary distributor into the cabinet or
steel, galvanised onto the wall. Sound-absorbing as per
DIN 4109.
Cabinets - flush mounting Depth: 110-145 mm

steel, galvanised Height: 350 mm
frame and doors white lacquered
removable screen
Inner width: 400 mm 4201081 For distributors with 6 outlets without water
meter or distributors with 3 outlets with water
meter.
Inner width: 600 mm 4201082 For distributors with 10 outlets without water
meter or distributors with 7 outlets with water
meter.
Connection elbow 90 To extend the sanitary distributor for one

connection.
11
OV
"Multidis R" Sanitary distributor with isolating facility Application:

bronze, without dead zone, self-sealing Potable water installations PN 10
GxG Max. water temperature: 90 C
2-fold 4200552* Completely pre-assembled and leak tested

unit. Complete pipe section made of bronze,
one-piece casted.
Connections:
3-fold 4200553* Female thread according to EN 10226-1
Male thread according to DIN ISO 228,
flat sealing
Tapered sealing surface for metal to metal and

4-fold 4200554* O-ring sealing.
To be used in combination with "Cofit S" and
"Ofix" compression fittings as well as "Cofit P"
press connections with collar nut and spherical
sealing surface.
Accessories
Replacement bonnet 4200590*
Bracket, small (10) 4200571* Bracket with mounting clip.

steel, galvanised For mounting the sanitary distributor with
isolating facility into the cabinet or onto the
wall.

Connection system "Combi-System" 11.f Fixing material and accessories for pipes
Page

Content
Fixing material 11.38
Accessories 11.38
11
2017 11.37
Fixing material
Connection system "Combi-System" Accessories
Packing
unit
Fixing material To fix the pipework on concrete flooring.

for pipes
Single dowel hook

plastic
for pipes with an outer diameter (50) 1509091

of up to 32 mm
Double dowel hook

plastic
for pipes with an outer diameter (50) 1509092

of up to 32 mm
Single dowel hook Maxi To fix insulated pipework on concrete

plastic flooring. No allowance for insulating
material required.
for insulated pipes with an outer (50) 1509093
diameter of up to 55 mm
Single pipe clip With thread M 6.

plastic To fix the pipework on the wall.
for pipes with an outer diameter of
14 mm (100) 1509151
16 mm (100) 1509152
20 mm (100) 1509153
Accessories
for pipes
11 Protective tube For protecting the pipe

made of LDPE - at junction points of screed joints
according to DIN EN 1264-4 /
Length: 300 mm, slotted, (20) 1501184 DIN 18560 T 2
for 14, 16 and 17 mm pipes - at the entry points when set in concrete
- at the exit points when set in concrete
Only sold in units of 20 protective tubes

per bag.
Single rosette cover Outer diameter of the covers: 56 mm

plastic
for pipes with an outer diameter of
14 mm 1509661
16 mm 1509662
Distance between pipe centres 50 mm

Perforation
12 mm (25) 1016671
14 mm (25) 1016672
15 mm (25) 1016673
16 mm (25) 1016674
18 mm (25) 1016675
11.38 2017
Connection system "Combi-System" 11.g Tools
Page
11.g Tools
Content
Tools 11.40
Press tools 11.43
Accessories 11.44
11
2017 11.39
Tools
for pipes
Pipe cutter For cutting the pipes at right angles, one tool
with special cutting wheel for all diameters.
Spare cutting wheel in the grip.
up to 32 mm diameter 1509580
Spare cutting wheel 1509588 For pipe cutter 1509580.
Pipe shears
up to 20 mm diameter
with protective tube cutter 1509567
Spare cutter for composition pipe 1509568

Spare cutter for protective tube 1509569
Universal tool For calibrating and deburring the pipes at

for deburring and calibrating the same time. By calibrating and chamfering
mandrels made of stainless steel the pipe ends, optimal fitting conditions
are ensured for the reinforcing sleeves of
for pipes 14 x 2.0 mm 1509594 the press fittings "Cofit P" and for the outlets
for pipes 16 x 2.0 mm of the compression fittings "Cofit S".
for pipes 20 x 2.5 mm
for pipes 14 x 2.0 mm 1509596

11 for pipes 16 x 2.0 mm
for pipes 40 x 3.5 mm 1519593
Mandrels
for universal tool
for deburring and calibrating
made of stainless steel
for pipes 14 x 2.0 mm 1509570

for pipes 16 x 2.0 mm 1509571
for pipes 20 x 2.5 mm 1509573
for pipes 26 x 3.0 mm 1509574
for pipes 32 x 3.0 mm 1509575
11.40 2017
Smoothing tool
for deburring and smoothing
cutting edge made of hardened stainless steel
for pipes 40 x 3.5 mm 1519595
Handgrip
for smoothing tool 1519596
Universal tool
for deburring and calibrating
for pipes 50 x 4.5 mm 1519598

for pipes 63 x 6.0 mm 1519599
Tool case for deburring/calibrating Deburring and calibrating tool with 9 mm

hexagon seating.
made of plastic 1519590 Deburring and calibrating tool for use with
rechargeable battery screwdriver up to a max.
Content: speed of 500 revolutions/min.
Deburring and calibrating tools made of
tempered stainless steel
with protecting cover made of galvanised steel
for pipes 14 x 2 mm
for pipes 16 x 2 mm
for pipes 18 x 2 mm
for pipes 26 x 3 mm
for pipes 32 x 3 mm
Content: 1519594
Deburring and calibrating tools made of
tempered stainless steel
11
with handgrip
for pipes 16 x 2 mm
for pipes 26 x 3 mm
Deburring and calibrating tool Deburring and calibrating tool with 9 mm

made of tempered stainless steel hexagon seating.
for pipes 17 x 2 mm 1519589

for pipes 20 x 2 mm 1519591
Handgrip 1519592 With 9 mm hexagon seating.

for deburring and calibrating tool
Pipe bending spring Prevents folding and kinking of the pipe,

made of stainless steel especially when bending small radii by hand.
length 600 mm For bending the composition pipe to radii
smaller than 5 x D.
for pipes 14 x 2.0 mm 1509561
for pipes 16 x 2.0 mm 1509562
for pipes 20 x 2.5 mm 1509563
2017 11.41
Pipe bending tool For the simple construction of even radii for
for pipes with an outer diameter outer pipe dimensions of 14 to 26 mm,
mechanical transmission.
14, 16, 18, 20 and 26 mm 1509591 Pipe bending tools for larger pipe diameters
are available from specialist stores, e. g. Tube
Bender Maxi of the company Rothenberger.
Holding key For holding the fittings. Simplifies the

aluminium installation of the compression fittings.
Spanner size 24/30 1509585 For fittings with G or G 1 male thread.
Spanner size 26/37 1509586 For fittings with G 1 male thread or for
tightening the G 1 collar nut of the dimension
26 x 3 mm.
Pipe straightener Suitable for coil unwinder 1519460.

16-26 mm 1519461
Ring spanner
Coil unwinder With location for pipe straightener 1519461.

for pipes
16-26 mm 1519460
11
Pipe straightener Suitable for adapter and bench mounting set.

for composition pipe Copipe
14-26 mm 1519462
Adapter To fix the pipe straightener 1519462

for pipe straightener and coil unwinder to the coil unwinder 1402096.
1519465
Bench mounting set To fix the pipe straightener 1519462

to a work bench or a table etc.
for pipe straightener 1519466
11.42 2017
Press tools
for "Cofit P" press fittings
and pipes
The sheet steel case has allowances for

Press machine 230 V 1519480 6 press bits.
(mains-operated) Machine only as replacement (without sheet
in a sheet steel case steel case) available on demand.
Machine only as replacement (without

Press machine 18 V 1519476 plastic case and accessories) available on
(Li-Ion rechargeable battery) demand.
Battery charger
Rechargeable battery 18 V / 3.0 Ah
in a plastic case
Manual press tool Suitable press bits:

Item no. 1519489 (diameter 14 mm)
for "Cofit P" 14, 16, 20 and 26 mm 1519482 Item no. 1519491 (diameter 16 mm)
with two additional location holes.
Press system case 1519490

made of sheet steel
Content:
Press bits 16, 20, 26, 32 mm
Pipe cutter
Universal tool for deburring and calibrating
Press bits Suitable for use with the Oventrop press

machines item no. 1519476 and 1519480. The
11
oventrop
Type H 16 A, 1519491 Oventrop press bits may also be used with the
for pipe 16 mm press machines of the following companies:
Type H 20 A, 1519492 Geberit type PWH75, Klauke types UAP2,
for pipe 20 mm UAP3L, UP2EL, Mannesmann/Novopress
Type H 26 A, 1519493 types EFP2, ECO1, AFP2, ACO1,
for pipe 26 mm Polytherm, Rems, Roller, Rothenberger,
Type H 32 A, 1519494 Uponor/Unicor, Velta, Viega type 2.
for pipe 32 mm
Type H 40 A (2G), 1519495
for pipe 40 mm
Press bits Only suitable for use with the following press
couplings:
Type RN 14, 1519489 Item no. 1512542 (14 x 2 mm)

for pipe 14 x 2 mm
Type RN 17, 1519488 Item no. 1512544 (17 x 2 mm)
for pipe 17 x 2 mm
Type RN 20 1519481 Item no. 1512541 (20 x 2 mm)
for pipe 20 x 2 mm
Suitable for use with the Oventrop press

Press clamps with auxiliary bits 1519497 machines item no. 1519476 and 1519480
in a sheet steel case as well as the press machines of the following
for 40 mm pipe companies:
Geberit type PWH75, Klauke types UAP2,
UAP3L, Mannesmann/Novopress types EFP2,
ECO1, AFP2, ACO1, Rems, Viega type 2.
2017 11.43

machines item no. 1519476 and 1519480
for pipe 50 mm 1519445 well as the press machines of the following
companies:
Klauke types UAP2, UAP3L, Uponor/Unicor
type UP 75.
Pressing device
for pipe 63 mm 1519446
Suitable press bits:

Press machine 18 V 1519681 Item no. 1519691 ( 16 mm)
(Li-ion rechargeable battery) Item no. 1519692 ( 20 mm)
Battery charger Item no. 1519693 ( 26 mm)
Rechargeable battery 18 V / 1.5 V Ah Item no. 1519694 ( 32 mm)
in a plastic case Machine only as replacement (without
plastic case) available on demand.

for press machine 18 V (Li-ion rechargeable battery) machine 18 V (rechargeable battery)
(item no. 1519681).
OV

Accessories
Battery charger 1519483

11 for press machine 18 V (Li-lon rechargeable battery)
Rechargeable battery 1519484 For Oventrop press machines 18 V item no.

18 V / 3.0 Ah 1519476 and 1519681.
for press machine 18 V (Li-lon rechargeable battery)
11.44 2017
Connection system "Combi-System" 11.h "Copex HT" PE-Xc Plastic pipe
Page

Content
"Copex HT" PE-Xc Plastic pipe 11.46
11
2017 11.45
Connection system "Combi-System" "Copex HT" PE-Xc Plastic pipe
Packing
unit
"Copex HT" PE-Xc Plastic pipe Application:

with oxygen barrier Potable water and heating systems.
rolls Pipes according to DIN 16892/

DIN 16893/ DIN EN ISO 15875.
Dimension 16 x 2.2 mm Oxygen tight according to DIN 4726.
length per roll 100 m (22) 1410151* Operational conditions:

Max. design temperature ts: 90 C
Attention:
length per roll 100 m (18) 1410461* Observe "Technical information" advice!
Dimension 25 x 3.5 mm Connection system "Cofit PD-HT":

from page 11.48
length per roll 50 m (18) 1410560*
length per roll 50 m (12) 1410660*
11

Connection system "Combi-System" 11.i "Cofit PD-HT" Press connection system
Page

Content
"Cofit PDK-HT" Press fittings made of plastic (PPSU) 11.50
Tools 11.51
11
2017 11.47
Connection system "Combi-System" "Cofit PD-HT" Press fittings made of bronze
Packing
unit
"Cofit PD-HT" Press fittings made of bronze Universal application for heating systems
designed not to seal and sanitary installations.
for PE-Xc plastic pipes "Copex HT"
Press connection with male thread For valves with female threaded connection.
16 x 2.2 mm xR (10) 1562043*

20 x 2.8 mm xR (10) 1562045*
20 x 2.8 mm xR (10) 1562046*
25 x 3.5 mm xR (5) 1562048*
25 x 3.5 mm xR1 (5) 1562049*
32 x 4.4 mm xR1 (5) 1562051*
Press connection with female thread For changing over to different pipe material and
for valves and fittings with male threaded
16 x 2.2 mm x Rp (10) 1562243* connection for sealing.
20 x 2.8 mm x Rp 1562245*
Press coupling
16 x 2.2 mm x 16 x 2.2 mm (10) 1562543*

20 x 2.8 mm x 20 x 2.8 mm (10) 1562545*
25 x 3.5 mm x 25 x 3.5 mm (5) 1562546*
32 x 4.4 mm x 32 x 4.4 mm (5) 1562547*
20 x 2.8 mm x 16 x 2.2 mm (10) 1562655*

25 x 3.5 mm x 16 x 2.2 mm (5) 1562656*
25 x 3.5 mm x 20 x 2.8 mm (5) 1562657*
32 x 4.4 mm x 25 x 3.5 mm (5) 1562660*
11

Connection system "Combi-System" "Cofit PD-HT" Press fittings made of bronze
Packing
unit
"Cofit PD-HT" Press fittings made of bronze Universal application for heating systems
Press elbow
16 x 2.2 mm x 16 x 2.2 mm (10) 1562843*

20 x 2.8 mm x 20 x 2.8 mm (10) 1562845*
25 x 3.5 mm x 25 x 3.5 mm (5) 1562847*
32 x 4.4 mm x 32 x 4.4 mm (5) 1562849*
Press T-piece
16 x 2.2 x 16 x 2.2 x 16 x 2.2 mm (10) 1563043*

20 x 2.8 x 20 x 2.8 x 20 x 2.8 mm (10) 1563045*
25 x 3.5 x 25 x 3.5 x 25 x 3.5 mm (5) 1563046*
32 x 4.4 x 32 x 4.4 x 32 x 4.4 mm (5) 1563047*
20 x 2.8 x 16 x 2.2 x 20 x 2.8 mm (10) 1563155*

25 x 3.5 x 16 x 2.2 x 25 x 3.5 mm (5) 1563156*
25 x 3.5 x 20 x 2.8 x 25 x 3.5 mm (5) 1563157*
20 x 2.8 x 16 x 2.2 x 16 x 2.2 mm (10) 1563354*

25 x 3.5 x 16 x 2.2 x 20 x 2.8 mm (5) 1563356*
Wall mounted connection piece with press connection, Fixing and insulating material available from
90, short model specialist stores.
For the connection of apparatus, valves and 11
16 x 2.2 mm x Rp (10) 1567053* fittings.
25 x 3.5 mm x Rp (10) 1567055*

Connection system "Combi-System" "Cofit PDK-HT" Press fittings made of plastic (PPSU)
Packing
unit
"Cofit PDK-HT" Press fittings made of plastic (PPSU) Universal application for heating systems
Press coupling
16 x 2.2 mm x 16 x 2.2 mm (10) 1552543*

20 x 2.8 mm x 20 x 2.8 mm (10) 1552545*
20 x 2.8 mm x 16 x 2.2 mm (10) 1552655*
Press elbow 90
16 x 2.2 mm x 16 x 2.2 mm (10) 1552843*

20 x 2.8 mm x 20 x 2.8 mm (10) 1552845*
Press T-piece
16 x 2.2 x 16 x 2.2 x 16 x 2.2 mm (10) 1553043*

20 x 2.8 x 20 x 2.8 x 20 x 2.8 mm (10) 1553045*
20 x 2.8 x 16 x 2.2 x 20 x 2.8 mm (10) 1553155*

11
20 x 2.8 x 16 x 2.2 x 16 x 2.2 mm (10) 1553354*

Connection system "Combi-System" Tools
Tools
for PE-Xc plastic pipes "Copex" and
press fittings "Cofit PHT"
Pipe cutter For cutting the pipes at right angles, one tool
with special cutting wheel for all diameters.
Spare cutting wheel in the grip.
Universal tool For calibrating and deburring the pipes at

for deburring and calibrating the same time.
mandrels made of stainless steel
for pipes 16 x 2.2 mm 1569594*


machines item no. 1519476 and 1519480. The
oventrop
Type H 16 A, 1519491 Oventrop press bits may also be used with the
for pipe 16 mm press machines of the following companies:
Type H 20 A, 1519492 Geberit type PWH75, Klauke types UAP2,
for pipe 20 mm UAP3L, UP2EL, Mannesmann/Novopress
Type H 25 A 1569493* types EFP2, ECO1, AFP2, ACO1,
for pipe 25 mm Polytherm, Rems, Roller, Rothenberger,
Type H 32 A, 1519494 Uponor/Unicor, Velta, Viega type 2.
for pipe 32 mm

for press machine 18 V (Li-ion rechargeable battery) machine 18 V (rechargeable battery) 11
(item no. 1519681).
OV

for pipe 25 mm 1569693*

Smart Home, centralised building control systems and other electronic controls Content
Page
12.a "DynaTemp" Home and Building automation

Content 12.05
System summary 12.06
12.b "DynaTemp HA" Home Automation

Content 12.07

"Aktor T 2P" 12.14
Accessories 12.16
"Aktor MH CON B" (ENOCEAN) Wireless actuator for Smart Home applications 12.17
"R-Tronic RT B" (ENOCEAN) Wireless thermostat for Smart Home applications 12.17
12.c "DynaTemp BA" Building Automation

Content 12.19
System types 12.21
12
2017 12.01
Page
12.d "DynaTemp BA" Building Automation

Content 12.23
DDC "CR-BS" Control unit 12.25
TR-250 Transformer 12.25
"RM-C F" Room module 12.25
"RM-C K" Room module 12.25
"ABR-55" Cover frame 12.25
"RM-C F8" Room module 12.26
"RM-C K8" Room module 12.26
"BWM-C F" Movement sensor 12.26
"RS-C F" Wireless temperature sensor 12.26
"FM-C WS" Outside temperature sensor 12.26
Thermostat "Uni LHZ" 12.27
Thermostat with remote control "Uni FHZ" 12.27
Wall connection set 12.27
"Aktor T 2P" Electrothermal actuators (two point) 12.28
Room thermostat - surface mounting 12.28
12.e "DynaTemp BA" Building Automation

Content 12.29
12 System illustration 12.30

DDC "CR-BX" Control unit 12.31
"ABR 55" Cover frame 12.31
oventrop
230V
50Hz
"RBG-C F" Room controller 12.32
L N

"RBG-C K" Room controller 12.32
"Aktor T ST" Electrothermal actuators (0-10 V) 12.33
12.02 2017
Page
12.f "DynaTemp BA" Building Automation

Automatic thermal balancing and thermal disinfection in potable water circulation systems
"CW-BS"
Content 12.35
DDC "CW-BS" Control unit 12.37
"Aquastrom DT" Electronic circulation regulating valve 12.37
"FM-CW Plus" Field module 12.38
"REM-CW" Relay module 12.38
"FM-CW K" Field module 12.38
12.g "DynaTemp BA" Building Automation

Content 12.39
e System illustration 12.40

g
f Datalog "CS-BS-1" 12.41
c b h Datalog "CS-BS-1" (WLAN) 12.41
k a Datalog "CS-BS-6" 12.41
j "Regtronic RH" Heating circuit controller 12.42
l
d "Regtronic SV" Sensor distributor 12.42
i
Accessories 12.44
"Regusol ELH-130-RC-P" Station DN 25 with high-efficiency pump 12.46
12
12.h Actuators, sensors, valves and fittings

Content 12.49
2017 12.03
Smart Home, centralised building control systems and other 12.a "DynaTemp" Home and Building
electronic controls automation
Page
12.a "DynaTemp" Home and Building automation

Content
12
2017 12.05
12.a "DynaTemp" Home and Building
Smart Home, centralised building control systems and automation
other electronic controls System summary
DynaTemp
Home and Building Automation Oventrop offers systems consisting of
Communication-capable valves, actuators, actuators, controllers and valves which can
sensors and controllers become more and be combined for different tasks of building
more important, not only for new buildings automation. The Oventrop products may
but also for the renovation of existing also be integrated into the systems of other
buildings. Building automation systems with manufacturers.
their monitoring, controlling and optimising
devices are paramount for comfortable, The Oventrop systems cover the following
energy-efficient and cost-saving building areas:
management. - Individual room temperature control
The effectiveness of such systems is, - Potable water circulation
however, only guaranteed if the above
products are coordinated to the optimum - Heat generation, storage, distribution
and if they adapt to the different demands and transmission
during heat transport and transmission.
h$YNA4EMPv(OMEAND"UILDING!UTOMATION
Home Automation Building Automation
/PERATION
)NTERFACES TCP / IP TCP / IP, Bacnet, Mod-Bus
#OMMUNICATION
CENTRES
Gateway (Synet, wibutler, Eltako, ...) DDC (Dynatemp, Siemens, Honeywell, Kieback & Peter, Sauter, ...)
)NTERFACES
EnOcean EnOcean, C-Bus, LON/KNX, ...
3ENSORS
!CTUATORS
12
6ALVES
CONTROLLERS
ANDREGULATORS
!PPLICATION
Summary Automation and System components
12.06 2017
Smart Home, centralised building control systems and other 12.b "DynaTemp HA" Home
electronic controls Automation
Page

Content

"Aktor T 2P" 12.14
Accessories 12.16
"Aktor MH CON B" (ENOCEAN) Wireless actuator for Smart Home applications 12.17
"R-Tronic RT B" (ENOCEAN) Wireless thermostat for Smart Home applications 12.17
12
2017 12.07
Smart Home, centralised building control systems and other 12.b "DynaTemp HA" Home Automation
electronic controls System summary
DynaTemp HA Home Automation

Components communicating with
communication centres (gateways) are used
in the area of Home Automation (for
individual dwellings and detached houses).
The gateways communicate with
smartphones, tablets and personal
computers using the TCP/IP protocol.
Easy remote access is possible by
connecting the gateways to common
routers.
With their system DynaTemp HA,
Oventrop offers gateways and components
for room temperature control. Components,
such as the wireless actuator Aktor MH B
(ENOCEAN) or the wireless thermostat
R-Tronic RTB (ENOCEAN) can
communicate with gateways of other
manufacturers.
DynaTemp Home and Building Automation
Home Automation
Operation
Interfaces TCP / IP
Communication
centres
Gateway (Synet, wibutler, Eltako, ...)
Interfaces
EnOcean
Sensors/
Actuators
12
Valves,
controllers
and regulators
Application
12.08 2017
Smart Home, centralised building control systems and other 12.b "DynaTemp HA" Home Automation
electronic controls System illustration
DynaTemp HA is a house information system for room

temperature control, switching (On/Off) of heat generators and
monitoring and modification of the room climate values. The used
bi-directional radio technology allows for the data exchange
between the individual components.
The system DynaTemp HA consists of the following components:
Synet CR Gateway for room temperature control and remote
control of appliances via smartphone, tablet etc.
R-Tronic Wireless thermostat (battery operated, optional supply
via the network)
Aktor MH/MD CON B Actuator (battery operated)
R-Con Multichannel wireless receiver
R-Con 2P Single-channel wireless receiver
%I
N
!US
Synet CR
+ Option 1: R-Tronic RT B
Wireless thermostat for room temperature control with timer
functions (battery operated, ush-mounted power pack or mains
adaptor available as accessories)
R-Tronic RT B Aktor MH/MD CON B
Option 2: R-Tronic RTF B

As option 1, but with integrated humidity sensor and display of the
+ relative humidity RH in % (battery operated, ush-mounted power

pack or mains adaptor available as accessories)
R-Tronic RTF B Aktor MH/MD CON B 12

Option 3: R-Tronic RTFC K
As option 2, but with additional sensor for measurement of the CO2
+ content and display of the CO2 concentration in ppm (no battery

operation, power supply via external ush-mounted power pack or
mains adaptor).
R-Tronic RTFC K Aktor MH/MD CON B
R-Con
Multichannel wireless receiver for surface heating and cooling
+ systems. All three models of the wireless thermostat

(R-Tronic RT B, R-Tronic RTF B and R-Tronic RTFC K) can
be connected to the wireless receiver R-Con.
Combined surface heating (R-Con) and radiator (Aktor MH/MD
CON B) control, for instance in bathrooms.
R-Tronic RT B/RTF B/RTFC K R-Con
R-Con 2P
Single-channel wireless receiver for the transmission of a switching
+ signal (On/Off) which is generated by the wireless thermostat

R-Tronic RTFC K if a CO2 threshold is exceeded or undercut.
R-Tronic RTFC K R-Con 2P
2017 12.09
Smart Home, centralised building control systems and other automatic presetting with "Synet CR"
electronic controls and automatic balancing with "Q-Tech"
Hydronic balancing with Synet CR and valves with

Q-Tech in detached and semi-detached houses Smartphone Entry:
OV app Building characteristics
Automatic presetting with Synet CR: (year of construction/total heated
Automatic presetting of thermostatic radiator valves, for instance surface)
in detached or semi-detached houses, can be carried out via a Room data (room area)
smartphone or tablet with the help of the gateway Synet CR Temperature difference
and the actuators for wireless thermostats Aktor MH CON B. Start of the automatic calculation of
Manual presetting at each radiator on the spot is thus not the valve stroke limitations
required.
Synet CR Automatic calculations:
Apart from room temperature control, the gateway Synet CR Gateway Automatic calculation of the heat load
allows for the calculation of the maximum required volume ow Automatic calculation of the maximum
for each radiator. The gateway Synet CR is preloaded with the required volume ows and stroke
calculation procedure (procedure according to VdZ specialist limitations (strokemax) for a maximum
of 16 different control zones (rooms)
rules for heating optimisation procedure A).
The valve characteristic line of the thermostatic valves with

Q-Tech which allows for the conversion of the detected R-Tronic RT B Automatic transmission of the stroke
volume ows for the stroke limitation of the actuators limitation values to the actuators
R-Tronic RTF B Aktor MH CON B
Aktor MH CON B is integrated in the gateway Synet CR. R-Tronic RTFC K
Setting of the nominal room
Wireless thermostats temperature (further setting options:
The user may carry out automatic presetting within a few steps page 1.35)
via a smartphone or tablet with the help of the setup assistant of
the OV app.
Aktor MH CON B Room temperature control with due

Actuator for wireless consideration of the stroke limitation
Automatic balancing with Q-Tech: (only up to strokemax)
thermostats
Irrespective of differential pressure variations in the heating
system, the radiator volume ow required for room temperature Room temperature control irrespective
control is constantly maintained by the control and regulating of p variations in the heating system.
valve with Q-Tech. After having carried out the automatic Valves with Q-Tech (Valves with Q-Tech from page 1.42)
presetting described above, the volume ow is limited to a
maximum value by the gateway Synet CR and the actuator
Aktor MH CON B mounted onto the thermostatic valve with Sequence of automatic presetting and balancing with Synet CR and
Q-Tech. valves with Q-Tech
Advantages:
Automatic calculation of the required
volume ow for each radiator and
automatic presetting of the
12 thermostatic valves with Q-Tech
via the actuator Aktor MH CON B
Manual setting of the thermostatic
valves at the radiator is not required
Pipework calculation and regulation
of the risers are not required
Presetting of the valves in the riser
is not required
Hydronically balanced heating
system during full and low demand
Strokemax (Room 2) Strokemax (Room 16) periods
Strokemax (Room 1)
Long battery life span as the
Aktor MH CON B only carries out
control commands for room
temperature control
Room 1 Room 2 Room 16

(maximum number)
System illustration (example): Hydronic balancing with Synet CR and valves with Q-Tech
12.10 2017

communication.

automatically.
Access options:
User interfaces:
Interfaces:
-LAN
-USB for WLAN stick
b. Client mode
-Mains adaptor 5 V
Installation options: 12
fixing plate.
2017 12.11

setback.
setback.
12 "R-Tronic RTFC K" Wireless thermostat with humidity and CO2 Electronic wireless thermostat "R-Tronic
Power supply:
with wall bracket
Power supply:
"R-Tronic RTFC K".
with table stand
1150684
1150884#

"Aktor MH CON B" Wireless actuator (M 30 x 1.5) Electronic actuator for wireless thermostats
Connection thread M 30 x 1.5 adjustable timed programmes at the wireless
Electronic actuator for wireless thermostats thermostats "R-Tronic RT B/ RTF B/ RTFC K".
with bi-directional wireless communication, Heating operation and the positon of the valve
battery operated (OPEN/CLOSED) of the "Aktor MH/MD CON B"
are shown on the display of the wireless
traffic white (RAL 9016) thermostat.
Operation via the menu-driven wireless
Only functions in combination with the thermostat.
wireless thermostats "R-Tronic RT B/ RTF B/ RTFC K".
Awards:
1150665
ICONIC AWARDS 2016
"Aktor MD CON B" Wireless actuator (squeeze connection) These actuators for wireless thermostats can
be fitted without adapter to the integrated
Squeeze connection distributors and thermostatic radiator valves
Electronic actuator for wireless thermostats with squeeze connection of the company
with bi-directional radio communication, Danfoss, series RA.
battery operated
Only functions in combination with the wireless

thermostats "R-Tronic RT B/ RTF B/ RTFC K".
1150675
"R-Con" Wireless receiver Electronic multichannel wireless receiver for

room temperature control of up to 8
230 V, without plug, wiring on site independent heating zones (surface heating)
according to adjustable timed programmes
4 channels with logic module 1150770 at the wireless thermostats "R-Tronic RT B",
4 channels without logic module 1150771 "R-Tronic RTF B" and "R-Tronic RTFC K".
8 channels with logic module 1150772 Operation via the menu-driven wireless
8 channels without logic module 1150773 thermostat.
Additional functions (direct selection via the

rotary switches at the wireless receiver): 12
-Pump logic with adjustable lead time
and follow-up time (only item no.
1150770/ 72)
-Burner logic for heat demand
(only item no. 1150770/ 72)
-Two point control
-PWM control for surface heating
Electrothermal actuators "Aktor T 2P" 24 V or

230 V can be connected to the 8 channels
(closing contact with 4A/250 V AC each).
An external transformer is required for the

power supply of 24 V actuators.
"R-Con HC" The extension module is connected to the

Extension module heating/cooling for wireless receiver "R-Con" and is used for
wireless receiver "R-Con" switching between heating and cooling
In preparation. operation via a C/O signal (change-over input).
The C/O signal is povided by a reversible heat
1150774 pump (volt free).
Furthermore, the "R-Con HC" module features
an input for dew point monitoring which
interrupts cooling when the dew point is
exceeded.
2017 12.13

"L NC", closed with current "off", 24 V 1012416 integrated distributor, distributors/collectors for
surface heating, radiant ceiling panels, chilled
ceiling systems and induction air systems in
combination with two point room thermostats.
installations.
For zone and room temperature control.
With "First-Open" function (except for
actuators "open with current off") and
stroke index.
volt free contact. Due to their construction, the
electrothermal actuators are secured against
overvoltage which could occur when switching
on neon tubes. A varistor is thus not necessary.
a a
12
b c
f
Heating/cooling
24 V / 230 V
C/O signal

Heat-
pump
a R-Tronic RT B / R-Tronic RTF B / R-Tronic RTFC K Wireless thermostat

b R-Con Wireless receiver
c R-Con HC Extension module heating/cooling
d FK-C F Wireless window contact
e Aktor T 2P (two point) Electrothermal actuator
f Multidis SF Stainless steel distributor/collector
g RP-S F Wireless repeater
12.14 2017
"R-Con 2P" Wireless receiver (1 channel) For activation and deactivation of fans
and ventilation systems. The switching
NC
230 V, flush mounting, 1150710* signal is generated by the wireless thermostat

NO
R-Con 2P
"R-Tronic RTFC K" if a set CO2 value is

1
4(1)A / 250V
cabling on site
exceeded or undercut.
2 230V
1 2 L N
Switching output (volt free):
"NC" closed with current "off" Two rotary switches at the "R-Con 2P" allow
"NO" open with current "off" for
1. the configuration of the switching output
"NC" closed with current "off"
"NO" open with current "off"
2. a manual setting of the switching output to
AUTO, ON, OFF or TEACH IN.
Maximum switching capacity of the volt free
output: 4(1)A/ 250 V AC
Example: CO2 dependent fan control
a b
c 12
a R-Tronic RTFC K Wireless thermostat
b R-Con 2P Wireless receiver
c Fan/ventilation system


wireless thermostats "R-Tronic RT B/ RTF B"
(100-240 V ~ /50-60 Hz) (100-240 V ~/ 50-60 Hz).
with wall bracket

"i-Tronic TFC" and
Compatible with:
("DynaTemp HA")
Note:
12
12.16 2017
12.b "DynaTemp HA" Home
Automation
"R-Tronic RT B" (ENOCEAN)
Smart Home, centralised building control systems and other Wireless thermostat for Smart Home
electronic controls applications
"Aktor MH CON B" (ENOCEAN) Wireless actuator for Smart Electronic actuator for room temperature
Home applications control. The actuator supports the EnOcean
profile A5-20-01 and can be connected to
connection thread M 30 x 1.5 1150765 communication centres/gateways or room
Electronic actuator thermostats of other manufacturers.
with bi-directional wireless communication,
battery operated

The actuator is not compatible with the
Only functions in combination with communication gateway "Synet CR" and the wireless
centres/gateways and room thermostats using the EEP thermostats "R-Tronic".
(EnOcean Equipment Profile) A5-20-01.
"R-Tronic RT B" (ENOCEAN) Wireless thermostat for Smart Home Electronic wireless thermostat for room
applications temperature control in combination with
communication centres/gateways (e.g. with the
Wireless thermostat wibutler smart home solution) supporting the
with bi-directional wireless communication, EnOcean Equipement Profile EEP. The nominal
battery operated, and actual temperature of the room are
surface mounting displayed. The wireless thermostat can be
connected to communication centres/
traffic white (RAL 9016) gatesways via the menu command. A supply
via the network is an alternative, see
1150780* accessories.
The wireless thermostat is not compatible

with the gateway "Synet CR" and the
actuators "Aktor MH/MD CON B".
12

Smart Home, centralised building control systems and other 12.c "DynaTemp BA" Building
Page
12.c "DynaTemp BA" Building Automation

Content
System types 12.21
12
2017 12.19
Smart Home, centralised building control systems and other 12.c "DynaTemp BA" Building Automation
DynaTemp BA Building Automation

The system DynaTemp BA allows for the integrated into the building automation
automation of control processes for heat systems of any manufacturer.
generation, distribution and transmission
in larger residential and non-residential
buildings.
Compared with the system DynaTemp HA
(for individual dwellings and detached
houses), the DynaTemp BA components
for control within the building automation
system are determined by the type of use,
degree of automation and the system
technology.
Oventrop control units (DDC) and
components, such as room thermostats,
actuators and control valves can be
DynaTemp Home and Building Automation
Building Automation
Operation
Interfaces TCP / IP, Bacnet, Mod-Bus
Communication
centres
DDC (Oventrop, Siemens, Honeywell, Kieback & Peter, Sauter, ...)
Interfaces
EnOcean, C-Bus, LON/KNX, ...
Sensors/
Actuators
12 Valves,
controllers
and regulators
Application
12.20 2017
Smart Home, centralised building control systems and other 12.c "DynaTemp BA" Building Automation
electronic controls System types
Models:
CR-BS Local individual room temperature control via bus technology
CR-BX Central individual room temperature control via bus technology
The temperature control function of these two systems is different. As for the system CR-BS, individual room temperature control without using
auxiliary energy is carried out at the radiator with classic thermostat sensor technology (liquid sensor) and timed temperature
setback is carried out by the control unit. With CR-BX, temperature control, control of the setback periods and monitoring are carried out by
the control unit. The sensor data is transmitted to the control unit by the field modules via a bus technology (C-bus). The control commands for
the actuators, such as the thermostat Uni LHZ and the electronic actuators, are transmitted by the control unit to the field modules via the field
bus. This way, an energy saving individual room temperature control for each application is guaranteed.
CW-BS Automatic thermal balancing and thermal disinfection in potable water circulation systems
The installation hydronics which is governed by the maintenance of an adequate potable water circulation temperature (according to
DVGW 57 C) is optimised by the control unit. Temperature detection is carried out by the Oventrop valve Aquastrom DT for potable water
circulation systems. The sensor temperatures are transmitted to the control units via the bus based field module and the control demands for
the Aquastrom DT are transmitted to the actuators by the CW via the field module.
Thermal disinfection is also controlled via the control unit. The latter transmits a starting signal to the boiler control; the potable water temperature
is increased and thermal disinfection of the risers of the circulation installation is carried out.
The control unit can be connected to the centralised building control system for monitoring and visualization purposes. Warning messages can
be transmitted via LAN or internet.
CS-BS Networking of stations for heat generation and distribution
This system allows the linkage of up to 6 bus application controllers of stations for solar heat generation, hot water preparation and different
heating circuits via a bus technology. The data from the different controllers is fed into the data logger CS-BS in order to store
and view the operating status, temperatures, flow rates and energy data over a longer period. New parameter settings for the controllers can be
determined with the help of this data and the operation behaviour of the complete installation, including the storage cylinder and the boiler can
be improved. Error diagnosis can also be carried out.
The installation data can be viewed via a PC or a standard smartphone. The integrated Web interface allows access to the system via a standard
web browser. The connection to the network (LAN) and the internet can be carried out via a standard router. A flexible, even external, access to
the installation is thus possible. It is, however, not necessary to integrate the data logger into a network, the direct connection of a PC is also
possible.
12
2017 12.21
Smart Home, centralised building control Local individual room temperature control via bus system
systems and other electronic controls "CR-BS"
Page

Content
DDC "CR-BS" Control unit 12.25
"RM-C K" Room module 12.25
"ABR-55" Cover frame 12.25
"RM-C K8" Room module 12.26
"RS-C F" Wireless temperature sensor 12.26
"FM-C WS" Outside temperature sensor 12.26
Thermostat "Uni LHZ" 12.27
Thermostat with remote control "Uni FHZ" 12.27
Wall connection set 12.27
Room thermostat - surface mounting 12.28
12
2017 12.23
Local individual room temperature control via bus system "CR-
Smart Home, centralised building control BS"
systems and other electronic controls System illustration
11
5
12
Wireless
sensors
14
10
24 V AC
8-fold
C-bus/
* Integration into a centralised building control system of other manufacturers (e.g. Honeywell, Kieback & Peter, Sauter, Siemens etc.)
RM
13
7
Centralised
Option with 8-fold room modules

system*
building
control
8-fold
RM
Outdoor
sensor
6
16
1
14
12
sensors
15
Wired
4
11
5
9
Option with individual room modules

Wireless
sensors
8
24 V AC
10
14
C-bus/
via the standardized interface BACnet IP.

Outdoor
sensor
16
14
2
2
1
12
sensors
4
Wired
Management level/
Automation level
Room level
DDC CR-BS control unit for central temperature setback with control signal transmission via wireless transmitter (EnOcean) or cable.
1 DDC CR-BS Control unit 8 RM-C F Flush-mounted room module, wireless, 1-fold
2 RM-C K Flush-mounted room module, 9 FK-C F Solar powered window contact,wireless, 1-fold
wired, 1-fold 10 BWM-C F Movement sensor, wireless
3 Window contact, wired (installation on site) 11 SecuSignal Window handle of the
4 Uni LHZ Thermostat company Hoppe (installation on site)
5 Aktor T 2PElectrothermal actuator, 24 V, two point 12 Uni FHZ Thermostat with remote control
6 RM-C K8 Surface-mounted room module, 13 RP-C F Flush-mounted repeater, 230 V, wireless
wired, 8-fold 14 Room thermostat with setback entry,24 V
7 RM-C F8 Surface- mounted room module, 15 Movement sensor, wired (installation on site)
wireless, 8-fold 16 FM-C WS Outdoor temperature sensor
12.24 2017
DDC "CR-BS" Control unit The control unit DDC "CR-BS" is used for
central temperature setback with the help of
with bus technology, 1153150 thermostats with liquid sensor. The
for the connection of 31 C-bus thermostats "Uni LHZ" or "Uni FHZ"
room modules, respectively room thermostats
BACnet IP interface, surface mounting, (item no. 1152052/72) are connected to the
operating/bus current: 24 V /50 Hz control unit via the C-bus room modules.
The integrated web server allows access to the
system via a PC and a standard web browser
as item no. 1153150, but for 1153151 (e.g. Mozilla Firefox).
62 C-bus room modules The parameters (e.g. setback temperature and
time profiles) of the system can be set via the
menu and the trend data as well as the current
status can be queried.
The integration of the system into the
centralised building control system is possible
via "BACnet IP".
TR-250 Transformer Transformer for the power supply of the DDC,

field modules, thermostats and actuators.
primary: 230 V; 50 Hz 1153055
secondary: 24 V/ 250 VA

primary: 230 V, 50-60 Hz 1153053
secondary: 24 V / 80 VA
"RM-C F" Room module The "RM-C F" is a bus based wireless room
module for the connection of actuators or
for one room 1153101 thermostats "Uni LHZ" or "Uni FHZ"
with EnOcean wireless technology and respectively room thermostats (item no.
C-bus communication, 1152052/72) as well as wireless window
flush mounting, contacts and wireless movement sensors with
24 V/50 Hz, EnOcean wireless technology. Moreover,
white (RAL 9010), window contacts or movement sensors
cover frame to be ordered separately installed on site can be evaluated via a volt free
contact by use of a cable.
12
Connection module for one room (1-fold).
Installation in a standard flush socket with
cover plate, but without cover frame.
"RM-C K" Room module Comparable to item no. 1153101, but without
EnOcean wireless technology. Window
for one room 1153121 contacts or movement sensors installed on site
without wireless technology, can be evaluated via cable.
with C-bus communication,
wired,
flush mounting,
24 V/50 Hz,
white (RAL 9010),
cover frame to be ordered separately
"ABR-55" Cover frame Cover frame for item no. 1153101 and
1153121.
white (RAL 9016) 1153170
2017 12.25
Packing
unit
"RM-C F8" Room module The "RM-C F8" is a bus based 8-fold wireless
room module for the connection of thermostats
for 8 rooms 1153118 "Uni LHZ" or "Uni FHZ" respectively room
with EnOcean wireless technology and thermostats (item no. 1152052/72) as well as
C-bus communication, wireless window contacts "FK-C F" or wireless
surface mounting, movement sensors "BWM-C F" with EnOcean
24 V/50 Hz wireless technology. Moreover, cabled window
contacts or cabled movement sensors installed
on site can be evaluated.
Connection module for 8 rooms (8-fold), for
surface-mounted installation.
"RM-C K8" Room module Comparable to "RM-C F8" but without

EnOcean wireless technology. Cabled window
for 8 rooms 1153128 contacts or cabled movement sensors installed
without wireless technology, on site can be evaluated.
with C-bus communication,
wired,
surface mounting,
24 V/50 Hz
Compatible with:
("DynaTemp HA")
Note:
"BWM-C F" Movement sensor The solar powered wireless ceiling sensor
serves the presence detection and luminosity
with EnOcean wireless technology 1153180 measurement.
12 surface mounting, Transmission to the wireless room modules via
EnOcean wireless technology.
solar powered,
white (RAL 9010) The solar powered energy storage ensures a
maintenance-free operation. The device
detects movements within a range of 360.
230V
50Hz
L N
wireless technology, contacts and the wireless room modules.
flush mounting,
230 V/ 50 Hz
"RS-C F" Wireless temperature sensor The solar powered wireless temperature sensor
is used for room temperature monitoring.
with EnOcean wireless technology 1153195 The temperature values or sequences can be
viewed via the control unit DDC "CR-BS".
"FM-C WS" Outside temperature sensor Outside temperature sensor to use the "DDC"
function "variable heating-up time".
with C-bus communication, 1153130 Power supply via the C-bus.
surface mouting, IP 65
12.26 2017
Packing
unit
Thermostat "Uni LHZ" In combination with the control unit DDC

"CR-BS", the thermostats "Uni LHZ" and
Connecting cable 1 m long 1150300 "Uni FHZ" allow for a timed temperature
connection thread M 30 x 1.5 setback with the help of an integrated
marking "DynaTemp" on lower electrically heated liquid sensor. The
side of the handwheel operation is identical with that of a
standard thermostat. If the thermostat
is engergized with a voltage of 24 V, it
switches to temperature setback.
The thermostats "Uni LHZ" and "Uni FHZ"
can be activated via the control unit
DDC "CR-BS" and the room modules via
LAN networks or the Internet.
Reinforcing cap The reinforcing caps are delivered with an Allen

white key.
oventrop
for thermostats "Uni LH", "Uni LHZ" and "Uni LA"

lockable (10) 1011866
Thermostat with remote control "Uni FHZ" without '0' setting,

with liquid sensor 1152265 Graduation on cap: * 1-4
connection thread M 30 x 1.5 Operating current: 24 V
connecting cable 1 m long Temperature setback: about 7 K
capillary 2 m long Connecting cable 1 m
Wall connection set Is used as additional protection for the wall
for "Uni LHZ" 1150390

installation (in a flush box) of the connecting
cable of the thermostat "Uni LHZ".
12
2017 12.27
Packing
unit

"L NC", closed with current "off", 24 V 1012416 conventional radiators, radiators with
surface heating, radiant ceiling panels, chilled
installations.
stroke index.
Room thermostat - surface mounting The electric room thermostat is used

for individual room temperature control
24 V (25) 1152052 in combination with the electrothermal
actuators (two point) "Aktor T 2P".
Heating: Use electrothermal actuators
(two point) "closed with current off".
As for item no. 1152051/52/55/71/72,
temperature may be set back by use of
an external time switch (item no.
1152551/52 for 230 V, item no. 1152554
for 24 V).
12
Reinforcing cap To protect electrothermal actuators against

vandalism.
for electrothermal 1012450 The special valve adapter with connection
actuators (two point) thread M 30 x 1.5 for fixing of the reinforcing
and (0-10 V) cap is included.
12.28 2017
Smart Home, centralised building control Central individual room temperature control via bus
systems and other electronic controls system "CR-BX"
Page

Content
DDC "CR-BX" Control unit 12.31
"ABR 55" Cover frame 12.31
oventrop
230V
50Hz
"RBG-C F" Room controller 12.32
L N
"RBG-C K" Room controller 12.32
"Aktor T ST" Electrothermal actuators (0-10 V) 12.33
12
2017 12.29
Central individual room temperature control via bus system
Smart Home, centralised building control "CR-BX"
systems and other electronic controls System illustration
Option with 8-fold room modules

10
5
11
11
3
8-fold
Supply
RM
Return
Distributor
Wireless
sensors
8
9
24 V AC
C-bus/
Centralised
system*
building
control
* Integration into a centralised building control system of other manufacturers (e.g. Honeywell, Kieback & Peter, Sauter, Siemens etc.
7
7
6
6
11 12
11 12
5
5
Distributor
Supply
Return
3
Option with individual room modules

13
2
24 V AC
C-bus/
4
4
sensors
Wired
4

2
2
12
12
12
Management level/
Automation level
Room level
DDC CR-BX for individual room temperature control, with control signal transmission via wireless transmitter (EnOcean) or cable
1 DDC CR-BX Control unit 8 RM-C F8 Surface-mounted room module, wireless, 8-fold
2 Window contact, wired (installation on site) 9 RP-C F Flush-mounted receiver, 230 V, wireless
3 Aktor T 2P Electrothermal actuator, 24 V, two point
10 Secusignal Window handle of the company
4 RBG-C K Surface-mounted room controller, wired Hoppe (installation on site)
5 FK-C F Solar powered window contact, wireless 11 RBG-C F Solar powered room controller, wireless
6 RM-C F Flush-mounted room module, wireless, 1-fold 12 Electrothermal actuator, 0-10 V or two point
7 BWM-C F Movement sensor, wireless 13 Movement sensor, wired (installation on site)
12.30 2017
Smart Home, centralised building control Central individual room temperature control via bus system
systems and other electronic controls "CR-BX"
DDC "CR-BX" Control unit The DDC "CR-BX" is used for central room
temperature control. The actuators are
with bus technology, 1153250 connected to the control unit via the C-bus
for the connection of 31 C-bus room room modules. The integrated web server
modules, allows access to the system via a PC and
surface mounting, BACnet IP interface, standard web browser (e.g. Mozilla Firefox).
operating/bus current: 24 V/50 Hz The parameters (e.g. nominal temperature and
time profiles) of the system can be set via the
menu and the trend data as well as the current
status can be queried.
as item no. 1153250, but for 1153251 The integration of the system into the
62 C-bus room modules centralised building control system is possible
via "BACnet IP".

primary: 230 V; 50 Hz 1153055

primary: 230 V, 50-60 Hz 1153053
"RM-C F" Room module The "RM-C F" is a bus based wireless room
module for the connection of actuators or
for one room 1153101 thermostats "Uni LHZ" or "Uni FHZ"
with EnOcean wireless technology and respectively room thermostats (item no.
C-bus communication, 1152052/72) as well as wireless window
flush mounting, contacts and wireless movement sensors
24 V/50 Hz, with EnOcean wireless technology.
white (RAL 9010), Moreover, window contacts or movement
cover frame to be ordered separately sensors installed on site can be evaluated via a
voltage free contact by use of a cable.
12
Connection module for one room (1-fold).
Installation in a standard flush socket with
cover plate, but without cover frame.
"ABR 55" Cover frame Cover frame for item no. 1153101 and
1153121.
white (RAL 9016) 1153170
2017 12.31
Packing
unit
"RM-C F8" Room module The "RM-C F8" is a bus based 8-fold wireless
room module for the connection of thermostats
for 8 rooms 1153118 "Uni LHZ" or "Uni FHZ" repsectively room
with EnOcean wireless technology and thermostats (item no. 1152052/72) as well as
C-bus communication, wireless window contacts "FK-C F" or wireless
surface mounting, presence sensors "BWM-C F" with EnOcean
24 V/50 Hz wireless technology.
Moreover, cabled window contacts or cabled
movement sensors installed on site can be
evaluated.
Connection module for 8 rooms (8-fold) for
surface-mounted installation.
"RBG-C F" Room controller Solar operated wireless room controller with
room temperature sensor, nominal room
with EnOcean wireless technology, 1153050 temperature setting device and presence key
nominal room temperature setting device button for setback and comfort operation, for
and presence key button, surface-mounted installation.
solar powered, The room controller transfers the data to the
white (RAL 9010) wireless room modules via EnOcean wireless
technology.
"BWM-C F" Movement sensor The solar powered wireless ceiling sensor
serves the presence detection and luminosity
with EnOcean wireless technology 1153180 measurement. Transmission to the wireless
surface mounting, room modules via EnOcean wireless
solar powered, technology.
white (RAL 9010) The solar powered energy storage ensures a
maintenance-free operation. The appliance
detects movements in a range of 360.
Compatible with:
("DynaTemp HA")
12 Note:
230V
50Hz
L N
wireless technology, contacts and the wirless room modules.
flush mounting,
230 V/ 50 Hz
"RBG-C K" Room controller The "RBG-C K" is a bus application room
controller with room temperature sensor for the
with C-bus communication, 1153271 connection of actuators as well as window
nominal room temperature setting device and contacts or movement sensors installed on site
presence key button with LED, via cable.
wired, Connection module for 1 room (1-fold), for
surface mounting, surface-mounted installation.
24 V/50 Hz, A nominal room temperature setting device and
white (RAL 9010) a presence key button with LED display and
possiblity to switch from comfort to setback
operation are integrated.
12.32 2017

"L NC", closed with current "off", 24 V 1012416 conventional radiators, radiators with
"L NC", closed with current "off", 24 V 1012442 integrated distributor, distributors/collectors for
cable 2 m long surface heating, radiant ceiling panels, chilled
installations.
stroke index.
12
2017 12.33
Smart Home, centralised building control Automatic thermal balancing and thermal disinfection in
systems and other electronic controls potable water circulation systems "CW-BS"
Page

Automatic thermal balancing and thermal disinfection in potable water circulation systems "CW-BS"
Content
DDC "CW-BS" Control unit 12.37
"Aquastrom DT" Electronic circulation regulating valve 12.37
"FM-CW Plus" Field module 12.38
"REM-CW" Relay module 12.38
"FM-CW K" Field module 12.38
12
2017 12.35
Smart Home, centralised building
Automatic thermal balancing and thermal disinfection in potable
control systems and other electronic water circulation systems "CW-BS"
controls System illustration
Centralised
building
control
system*
**
Management level/
Automation level
C-bus/ C-bus/
24 V AC 24 V AC
Room level
Potable
water
circulation
Max. of 31/62
Potable
water hot eld modules
12
0-10V
Max. of 31/62
230V ~ eld modules
* Integration into a centralised building control system of other manufacturers (e.g. Honeywell, Kieback & Peter, Sauter, Siemens etc.)
** Router congurations, such as port forwarding, are required to access the DDC.
DDC CW-BS for automatic thermal balancing and thermal disinfection in potable water circulation systems
1 DDC CW-BS Control unit 5 Temperature sensor G 14

2 Aquastrom DT Regulating valve 6 Aquastrom KFR
including eld module with actuator 7 Optibal TW Ball valve for potable water
24 V, 0-10 V and temperature sensor 8 Circulation pump
3 FM-CW Plus Field module for the 9 Storage cylinder temperature sensor, PT 1000
connection of sensors and pumps
4 Aquastrom FR
12.36 2017
Smart Home, centralised building control Automatic thermal balancing and thermal disinfection in potable
systems and other electronic controls water circulation systems "CW-BS"
DDC "CW-BS" Control unit The control unit DDC "CW-BS" is used for
automatic thermal balancing and thermal
with bus technology, 1153350 disinfection in potable water circulation
for the connection of 31 C-bus field modules, systems. The control valves "Aquastrom DT"
surface mounting, with electromotive actuator are connected to
24/ 50 Hz, the C-bus via the bus application field
bus current: 24 V/50 Hz modules. The integrated web server allows
access to the system via a PC and a standard
web browser (e.g. Mozilla Firefox).
The parameters (e.g. time profiles) of the
as item no. 1153350, but for 1153351 system can be set via the menu and the trend
62 C-bus field modules data, the current status as well as the
disinfection records can be queried.
The integration of the system into the
centralised building control system is possible
via "BACnet IP".

primary: 230 V; 50 Hz 1153055

primary: 230 V, 50-60 Hz 1153053
"Aquastrom DT" Electronic circulation regulating valve Electromotive circulation valve with field
Potable water installations PN 10 module "FM-CW K" for electronic regulation of
Max. water temperature: 90 C the required circulation volume flow in
combination with the control unit
both ports female thread according to EN 10226-1 DDC "CW-BS".
DN 15, Rp x Rp 1150004 Bronze according to DIN 50930-6, with

DN 20, Rp x Rp 1150006 temperature sensor PT 1000, without dead
DN 25, Rp 1 x Rp 1 1150008 zone, with isolating facility, draining valve for 12
draining of the riser and insulation shells made
both ports male thread according to DIN ISO 228, flat sealing of expanded polypropylene according to the
DN 15, G x G 1150104 building matieral class B2 according to
DN 20 , G 1 x G 1 1150106 DIN 4102.
DN 25, G 1 x G 1 1150108
Accessories
"Sensor LW TQ"
Sensor element PT 1000 1150090 For remote monitoring of the riser temperatures
G , bronze body, and integration into a centralised building
temperature sensor made of stainless steel, control system.
two wire system
2017 12.37
Smart Home, centralised building control Automatic thermal balancing and thermal disinfection in potable
systems and other electronic controls water circulation systems "CW-BS"
"FM-CW Plus" Field module The "FM-CW Plus" is a bus based field module
for temperature detection, utilising 3 PT 1000
for the connection of sensors and 1153321 sensors. Two volt free relais can, for instance,
pumps with C-bus communication, be used for the control of the circulation/
3 x PT 1000 temperature sensors/inputs, storage cylinder pump, a thermostatic mixing
surface mounting, valve or the burner demand. Optionally, control
24 V/50 Hz of the burner demand can also be carried out
via a 0-10 V signal.
"REM-CW" Relay module Volt free contact which is activated via a

0 - 10 V analogue inlet (e.g. of the "FM-CW
with analogue outlet (0 - 10 V) 1153331 Plus") and which can be used for boiler control.
Relay contact: closing contact,
(max.) 230 V / 5 A,
volt free
"FM-CW K" Field module The "FM-CW K" is a bus based field module for
only supplied as replacement, already comes with the the connection of the regulating valve
regulating valve "Aquastrom DT" "Aquastrom DT" for one riser.
with C-bus communication, 1153301

surface mounting,
24 V/50 Hz
12
12.38 2017
Smart Home, centralised building control systems Network of stations for heat generator/heating circuit
and other electronic controls and solar thermal energy "CS-BS"
Page

Content
e
g Datalog "CS-BS-1" 12.41
f
c b h Datalog "CS-BS-1" (WLAN) 12.41
k a Datalog "CS-BS-6" 12.41

j "Regtronic RH" Heating circuit controller 12.42
l
d "Regtronic SV" Sensor distributor 12.42
i
Accessories 12.44
"Regusol ELH-130-RC-P" Station DN 25 with high-efficiency pump 12.46
12
2017 12.39
Smart Home, centralised building control systems and solar thermal energy "CS-BS"
and other electronic controls System illustration
4
2
WLAN
3
www.portal.oventrop.com TCP / IP
Internet
TCP / IP
m
co
op. WLAN
t r
4 en
ov
t a l.
or
w.p
ww
6
Remote access via the Oventrop internet portal
Cold water
S-bus
Boiler control line

12
Heat
generator
1 Datalog CS-BS-1 (WLAN)

2 Standard router/switch (e.g. FritzBox)
3 Mobile displays (iPhone, iPod touch, iPad, Blackberry etc.)
4 PC/Laptop
5 Regucor WHS with controller Regtronic RS
6 OKF Flat-plate collector or OKP tube collector
12.40 2017
Datalog "CS-BS-1" Data logger for an easy networking and

visualization of different components/
Data logger for data collection and 1159096 controllers for solar thermal energy, heating
reading of controller data (1 controller) and fresh water technology.
A system visualization is possible via The following controllers can be connected
the Oventrop portal. to the data logger "CS-BS":
Suitable for wall attachment "Regtronic RC/RC-P"
"Regtronic RX"
"Regtronic RQ"
Datalog "CS-BS-1" (WLAN) "Regtronic RH"
"Regtronic RM"
"Regtronic RS" (Regucor)
Data logger for data collection and 1159097*#
Controller data can be read via an integrated
reading of controller data (1 controller)
web interface. The data can be transmitted to
A system visualization is possible via
a standard file format and be evaluated via
the Oventrop portal.
third party software (see CSV file format).
Suitable for wall attachment
Connection to the centralised building control
system can be carried out via the Datalog
Datalog "CS-BS-6" "CS-BS-6". For the preparation of trend
data, the sensor and relay states are
Data logger for data collection and 1159095 cyclically transmitted to the Oventrop portal
parameterization of up to 6 controllers. (www.portal.oventrop.com) by the datalogger.
Suitable for wall attachment The connection is encrypted and supplies the
following functions without additional router
configurations:
-remote access
-data/system visualization
-backup of history data
Interfaces:
LAN, WLAN (only item no. 1159097)
Inputs: 3 temperature inputs (PT 1000)
The data logger can be easily operated via
three keys and features a full graphics display
for status visualization (only datalog
"CS-BS-6").
Power supply via an external mains adaptor.
#Only for use inside the EU.
12
2017 *New in catalogue 2017 to be discontinued 12.41

"Regtronic RH" Heating circuit controller Weather-guided control of the flow

temperature of the heating system by
with 1 outdoor sensor 1152093 activation of a heat generator and/or a mixing
and 3 additional sensors (PT 1000) valve (e. g. "Regumat M3" or "Regufloor HW"
with three-way mixing valve).
Controller for wall attachment with data bus
with 1 outdoor sensor, 1152090 (S-bus) for connection to the data logger
2 additional sensors (PT 1000) "CS-BS".
and remote control including room temperature sensor (PT 1000) Basic functions: 1 variable and 1 constant
temperature heating circuit with heat demand.
Extension via "Regtronic EM".
ErP classication heating circuit controllers Regtronic RH and Regtronic EH
Boiler control Data can be viewed via a full graphics display.
Required
Item no. Controller
accessories
modulating
On/Off
ErP % Class Interfaces: S-bus for connection to the data
(0-10 V) logger "CS-BS". SD-card slot for data
1152092 Regtronic EH X 1.5 III recording.
Adapter cable Inputs: 8 inputs for sensors (PT1000, KTY,
1152086 switch or remote control), 2 inputs for
1152093 Regtronic RH X 1.5 III electronic flow sensor VFD (volume flow /
Regtronic RH temperature) and irradiation sensor.
Adapter cable
1152090 incl. remote control with X 4.0 VI Outputs: 4 solid-state relays (speed controlled),
1152086
room temperature sensor 1 standard relay (volt free),
Regtronic RH 2 pulse-width modulation (PWM) outputs for
1152090 incl. remote control with X 3.5 VII the speed controlled activation of high-
efficiency pumps. Both pulse-width modulation
2 x room
Regtronic RH temperature (PWM) outputs can be switched to 0 - 10 V.
room temperature sensor Adapter cable For the connection of high-performance
1152086
Adapter cable Adapter cable for signal transmission, for

instance from the heating circuit controller
PWM-/ 0-10 V 1152086 "Regtronic RH" to a modulating heat generator
with 0-10 V interface.
Accessory required for ErP classification II, VI
and VIII.
12 Outside temperature sensor 1152099 Temperature sensor PT 1000 for connection to

the heating circuit controller "Regtronic RH".
"Regtronic SV" Sensor distributor The sensor distributor "Regtronic SV"

distributes the signal of one PT 1000 outside
for the distribution of one PT 1000 1152088 temperature sensor to 6 outputs.
temperature sensor to up to 6 "Regtronic" This allows the transmission of the signal of
controllers one sensor to up to 6 controllers (e.g. heating
circuit controller "Regtronic RH").
Outdoor temperature sensor
Regtronic SV Sensor Regtronic RH Regtronic SV Sensor Regtronic RH

distribution box distribution box
Example: Distribution of one temperature sensor (outside

temperature sensor) to 5 respectively 6 heating circuit
controllers "Regtronic RH".
12.42 2017
controller "Regtronic RH" This way, further variable or constant
temperature heating circuits can be activated.
Up to five extension modules can be
connected to the heating circuit controller
"Regtronic RH".
included.
Regtronic RH Extension
Outdoor sensor Regtronic EM
S-Bus
Heat demand
Pump Temperature sensor Temperature sensor

heating supply supply
circuit 1 Pump heating Pump heating Pump heating
circuit 2 circuit 3 circuit 4
Mixing valve heating circuit OPENED Mixing valve heating circuit OPENED
Mixing valve heatingcircuit CLOSED Mixing valve heating circuit CLOSED
Boiler
Extension
12
Example: Weather guided control of 2 variable and 2 constant

temperature circuits with heat demand (e.g. via a conventional
boiler, solid fuel or heat pump) consisting of the heating circuit
controller Regtronic RH with outdoor sensor and the extension
module Regtronic EM.
Oventrop products:
1 Regtronic RH Heating circuit controller with outdoor sensor
2 Regtronic EM Extension module
3 Distributor for Regumat
4 Regumat S
5 Regumat M3
6 Optiex Ball valve
7 MSM-Block Boiler safety device
8 Expa-Con Valve with lead sealable cap
2017 12.43
Accessories

Room controller with operating mode switch,

Room controller with 1152087 remote control and room temperature sensor
operating mode switch, remote control PT 1000 for the connection to the heating
and room temperature sensor PT 1000 circuit controller "Regtronic RH" for a
comfortable setting of the operating mode and
heating curve of the controller from the living
area.
Operating mode switch:
Setting of the operating modes "Automatic",
"Night setback", "Summer" and "Off".
Remote control:
An increase of the heating curve provokes an
increase of the flow temperature and vice
versa. Furthermore, the remote control features
the functions "Heating circuit off" and "Party
12 position".
12.44 2017
Packing
unit
for individual room temperature control of
with daily setting heating systems in combination with the
electrothermal actuators (two point)
230 V (78) 1152551 "Aktor T 2P". Output signal pulse-width
modulation.
with weekly setting Temperature range: 5 C up to 30 C
Heating:
230 V (78) 1152552 Use electrothermal actuators (two point)
24 V 1152554 closed with current off.
Central temperature setback is carried out
Room thermostat - surface mounting The surface- or flush-mounted model of the

electric thermostat is used for individual
230 V (25) 1152051 room temperature control in combination with
24 V (25) 1152052 the electrothermal actuators (two point)
"Aktor T 2P".
Heating: Use electrothermal actuators (two
point) "closed with current off". As for item no.
back by use of an external time switch (item
no. 1152551/52 for 230 V, item no. 1152554
for 24 V).
Cooling: Use electrothermal actuators (two
point) "open with current off".
limiting elements.
The isolator terminals of the room thermostat
can be connected to the sensor entry of the
The heating circuit controller can for instance
activate a 230 V actuator or can switch to
reduced heating operation.
12
2017 12.45

g with safety group and electronic controller for the connection to the solar circuit.
f consisting of: With integrated electronic controller for the
c b h
a) high-efficiency pump control and monitoring of a solar thermal
k a b) ball valve with integrated check valve, thermometer and plant according to the temperature difference
connection for safety group principle. These stations are mainly used for
j c) ball valve with integrated check valve and thermometer hot potable water preparation.
l d) flow measuring and regulating device with isolation and lateral With G 1 male threaded connection for
d
i fill and drain ball valve "Regusol" compression fittings to the solar
f) outlet G male thread to expansion tank For copper and precision steel pipes.
g) pressure gauge 10 bar Alternatively, compression fittings according to
h) fill and drain ball valve DIN EN 16313 (cone "Euro") of other
i) wall mounting device manufactures may also be used.
j) electronic controller
k) insulation With the option to connect an expansion tank
l) deaerator to the safety group.
Control range of the flow measuring and regulating device: Pump 130 mm long.
2-15 l/min Continuous operating temperature: 120 C
with Wilo-Yonos PARA ST 25/7 PWM 2 1366597 Suitable for standard solar liquids.
and controller "Regtronic RC"
with data output (S-bus) The data output of the "Regtronic RC" can be
connected to the data logger "CS-BS".

temperature sensor (PT1000).
c b e "Regusol ELH-130-RC-P" Station DN 25 with high-efficiency Apart from hot potable water prepration,
g
pump this station with high-efficiency pump
f
h with safety group and electronic flow sensor offers additional functions.
k The integrated additional controller allows a
a
consisting of: support of the heating system, a difference
12 j a) high-efficiency pump
control or a circulation function.
Yield measurement is possible via the
l d b) ball valve with integrated check valve, thermometer and electronic flow sensor.
connection for safety group
c) ball valve with integrated check valve and thermometer Flow sensor without lateral fill and drain
d) electronic flow sensor (2-40 l/min.) ball valve, use filling and flushing device
e) safety valve 6 bar "Regusol": page 9.33.
g) pressure gauge 10 bar Interfaces: S-bus for connection to the data
h) fill and drain ball valve logger "CS-BS", SD-card slot for data
i) wall mounting device recording
j) electronic controller Inputs: 4 temperature sensors (PT 1000),
k) insulation 1 input for electronic flow sensor (volume flow /
l) deaerator temperature)
Outputs: 3 relays, 1 is a volt free relay,
with Wilo-Yonos PARA ST 25/7 PWM 2 1360394 2 pulse-width modulation (PWM) outputs for
and controller OV-"Regtronic RC-P" the speed controlled activation of high-
with data output (S-bus) efficiency pumps.

12.46 2017
"Regusol X-Uno 25" with heat exchanger Product assembly with electronic controller,
Station with heat exchanger with heat exchanger, with three-
1 solar circuit connection way conversion valve for second secondary
with electronic controller "Regtronic RX" circuit ("Regusol X-Duo 25" only) for a
with full graphic display and data output (S-bus) controlled transmission of the heat of the solar
circuit (primary circuit) to a buffer storage
Capacity: 25 kW cylinder (secondary circuit), for instance for
Number of heat exchanger plates: 30 existing storage cylinders without direct solar
connection.
Connections: The three-way valve integrated in the supply
Primary side: G 1 "Regusol" compression fittings pipe of the secondary circuit ("Regusol X-Duo
Secondary side: G 1 flat sealing 25" only) allows the conversion to an additional
loading circuit running in parallel, for instance
kvs = 2.4 m/h primary side for the loading section by section of the
(with a glycol proportion of 40 % in the solar liquid) storage cylinder or the thermal loading of
kvs = 3.6 m/h secondary side another storage cylinder.
Primary circuit: up to PN 10 and 120 C
with Wilo Yonos high-efficiency pumps 1361060 Starting temperature: 160 C
Primary side: ST PWM 15/7 Secondary circuit: up to PN 6 and 120 C
Secondary side: RS PWM 15/7 constant operation
The soldered plate heat exchanger complies

"Regusol X-Duo 25" with heat exchanger with the demands of the European Pressure
Station with heat exchanger Equipment Directive (PED). Due to turbulent
1 solar circuit connection/ flow conditions, an excellent self-cleaning
2 loading circuit connections effect is produced and a contamination is
with electronic controller "Regtronic RX" avoided.
with full graphic display and data output (S-bus) The solar circuit is protected against excess
pressure by a safety group integrated in the
Capacity: 25 kW heat exchanger system. The leak tested
Number of heat exchanger plates: 30 components of the heat exchanger system are
pre-assembled on a board. The controller is
Connections: cabled with the internal electric components
Primary side: G 1 "Regusol" compression fittings and has the following connections:
Secondary side: G 1 flat sealing Output for solar circuit pump
Output for loading pump
kvs = 2.4 m/h primary side Output for conversion valve
(with a glycol proportion of 40 % in the solar liquid) ("Regusol X-Duo 25" only)
kvs = 3.2 m/h secondary side Apart from the outputs mentioned above
the "Regtronic RX" has a data bus (S-bus) for
the connection to the data logger "CS-BS".
with Wilo Yonos high-efficiency pumps 1361050
Temperature inputs for: 12
Primary side: ST PWM 15/7
Collector, heat exchanger entry point - primary
Secondary side: RS PWM 15/7
side, heat exchanger exit point - secondary
side, 3 temperature inputs for storage cylinder
with loading operation section by section,
interfaces for electronic flow sensor.
Plain text is clearly shown on the display of the
controller.
For the extension of a "Regusol X" station with high-efficiency
The heat exchanger system is completely
pump for the interconnection and regulation of different collector
insulated and can be quickly connected to the
fields (e.g. east/west), see supplementary set "Regusol X":
primary side using compression fittings and to
page 9.35
the secondary circuit using flat seals and be
put into operation.
The indicated capacity for the heat
transmission applies to a useable solar global
radiation of 500 W/m.
The actual heat transmission depends on:
the reached flow temperature and the

volume flow of the primary circuit
the flow temperature difference between the
primary and the secondary circuit
the required flow temperature and the flow
rate of the secondary circuit
2017 12.47
"Regumaq X-30" - without circulation connection Application:

Station for hot potable water preparation Electronically controlled product assembly with
with electronic controller "Regtronic RQ" heat exchanger for the hygienic heating of
with full graphic display and data output (S-bus) potable water according to the continuous flow
principle.
with Wilo high-efficiency pump Yonos PARA RS 130 15/7 PWM2 The potable water is only heated at the
for the buffer side moment when it is needed, i. e. "just in time".
Heat exchanger: 30 plates The stations are expecially suitable for
detached and semi-detached houses. They are
Discharge capacity: 2 - 45 l/min. connected to buffer storage cylinders which
depending on the set potable water temperature are heated up by solar energy, solid fuels, gas
and the existing water temperature inside the buffer storage cylinder or oil.
Depending on the temperature and the volume
Control range of potable water temperature: 20 C - 60 C flow on the potable water side, the circulation
pump on the heating side is speed regulated.
Connections: G 1 flat sealing for the connection to the The plate heat exchanger complies with the
buffer and potable water circuit specifications of the European Pressure
Potable water circuit: Due to the turbulent flow, a good self-cleaning
with flow sensor, safety valve 10 bar, effect avoiding a contamination is achieved.
electronic resistance thermometer, 2 fill and drain cocks, The plate heat exchanger can be flushed using
ball valves and thermometer the fill and drain cocks integrated in the
primary and secondary circuit.
Buffer circuit: Fill and drain cocks, ball valves with and The potable water circuit is protected by a 10
without check valve and thermometer, circulation pump bar safety valve.
The components of the heat exchanger system
Dimensions (outer dimensions of insulation): have flat sealing connections, are pre-
Width: 500 mm assembled on a mounting board and leak
Height: 860 mm tested.
Depth: 260 mm The controller is wired up with the internal
electric components and features a data bus
Model with copper brazed 1381030 (S-bus) for the connection to the data logger
heat exchanger "CS-BS".
"Regumaq XZ-30" - with circulation connection Similar to "Regumaq X-30". The potable water
Station for hot potable water preparation circuit is additionally equipped with a
with electronic controller "Regtronic RQ" circulation pump for the operation in a
12 and connection for potable water circulation systems circulation system.
With check valve in the circulation circuit.
with Wilo high-efficiency pump Yonos PARA RS 130 15/7 PWM2 Control functions individually programmable:
for the buffer side Adjustable circulation return temperature or
adjustable time frames and daily programmes.
with Wilo pump ZRS 130 15/4-3KU
for the potable water side (circulation)
Model with copper brazed 1381035

heat exchanger
"Regumaq XZ-30" - with circulation connection and high- Similar to "Regumaq X-30". The potable water
efficiency circulation pump circuit is additionally equipped with a high-
Station for hot potable water preparation efficiency circulation pump for the operation in
with electronic controller "Regtronic RQ" a circulation system.
and connection for potable water circulation systems With check valve in the circulation circuit.
Control functions individually programmable:
with high-efficiency pump Wilo-Yonos PARA RS 130 15/7 PWM 2 Adjustable circulation return temperature or
for the buffer side adjustable time frames and daily programmes.
with high-efficiency pump Wilo-Yonos PARA Z RKC 130 15/7 Possible application of copper brazed plate
for the potable water side (circulation) heat exchangers has to be checked. For further
Model with copper brazed 1381025 trinkwasseranforderung.
heat exchanger
12.48 2017
Smart Home, centralised building control systems and other 12.h Actuators, sensors, valves and
electronic controls fittings
Page
12.h Actuators, sensors, valves and fittings

Content
12
2017 12.49
Smart Home, centralised building control systems and other 12.h Actuators, sensors, valves and fittings
Aktor Actuators
Different types of control and actuators are used for the building automation:
For a complete isolation of the volume ow, the installation of an actuator with two point control (on/off) on the ow valve is sufcient.
Short and long stroke periods are optional.
When using mixing- or diverting valves, intermediate actuator positions become necessary for the adaptation of two volume ows.
These actuators feature a steady control and any position between fully open and fully closed can be initiated.
Depending on whether a control voltage is supplied by the building automation permanently or only at the point of adjustment, distinction is made
between the 0-10 V and three point control.
As before with the two point actuators, a long or short stroke period is optional.
Aktor T 2P For room temperature control or

Electrothermal actuator (two point) as a zone valve.
Page 1.26.
Aktor M 2P With quick stroke.

Electromotive actuator (two point) Page 1.28.
230 V/24 V, two point actuator,
Aktor M 2P With quick stroke.

Electromotive actuator (two point) Page 1.28.
230 V/24 V, two point actuator,
Aktor M 3P Page 1.28.

Electromotive actuator (three point)
230 V/24 V, three point actuator,
Aktor T ST L For steady room temperature

Electrothermal actuator (0-10 V) control.
24 V, steady control Page 1.27.
12
Aktor M ST L with adjustable characteristic lines Electromotive actuator with
Electromotive actuator (0-10 V) varied adjustable characteristic
24 V, steady control lines (linear, equal percentage).
Page 1.28.
Actuators with bus interface

Aktor M ST EIB/KNX
with one binary entry

with two binary entries
Aktor M ST LON
with adapter for squeeze connection
Legend: M: Electromotive actuator 2P: Two point control ST: Steady control L: 24 V B: Battery
T: Electrothermal actuator 3P: Three point control CON: Controller integrated H: 230 V
NO: Normal open

NC: Normal closed
12.50 2017
Sensor Sensors
Different types of sensors for the detection of temperature, humidity, pressure and other physical values are used in centralised building control
systems. Distinction is made between passive sensors (e.g. PT 1000, N 1000) and active sensors (e.g. 0-10 V output signal). Moreover, the
sensors are used for different applications (e.g. potable water).
Sensor GA FD Is required in conjunction with room

Dew point control with alternating contact thermostats to protect chilled surfaces
against condensation.
Page 2.72.
Sensor LW TH/pipe Sensor attached to the pipe with clip xing.

Temperature sensor, PT 1000, cold Page 6.105.
Sensor LW TH For max. limitation of the ow temperature

Electric sensor attached to pipe, bimetal of surface heating systems.
Page 6.96.
Sensor LW TH For electronic detection of the solar collector

Temperature sensor, PT 1000 temperature.
Solar collector Page 6.74.
-50 C up to +180 C
Sensor LW TH For electronic temperature detection in

Temperature sensor, PT 1000 storage cylinders or heating systems.
Heating systems Page 6.74.
-10 C up to +105 C
Sensor LW TQ For electronic temperature detection in

Temperature sensor G 14, PT 1000 potable water risers.
Page 12.37. 12
Sensor LW TQ For electronic temperature detection

Insertion sensor element, PT 1000 in potable water risers. Suitable for all
Aquastrom valves with thermometer
connection.
Page 8.30.
Legend: L: Liquid W: Water A: Air T: Temperature C: Concentration Q: Potable water D: Dew point
G: Gas O: Oil C: CO2 content F: Humidity P: Pressure H: Heating water/ U: Transformer
cooling water
2017 12.51
Valves and controls

For heating and cooling system control, the volume ows in the terminal units such as radiators, chilled ceilings, fan coils etc. are balanced by
corresponding valves and controls.
At the same time, presetting for hydronic balancing can be carried out at the valves or the volume ow is limited automatically.
The list illustrates a choice of valves and controls for different applications.
The valves and controls can be combined with the preceding actuators.
AQ/AV9 Thermostatic valves Thermostatic valve for room

DN 10 DN 25 temperature control at radiators
with classic valve connection.
Can also be used as zone valve
for smaller dimensions
Page 1.42/1.50.
Multiblock TQ Two pipe tting Connection ttings

Straight pattern Multiblock T for the control
and isolation of radiators with a
lower connection of 50 mm.
For two and one pipe heating
systems.
Page 1.45.
Valve insert (M 30 x 1.5) Valve insert for radiators with

for radiators with integrated distributor integrated distributor.
Page 1.102.
Multidis SH Stainless steel distributor/ Stainless steel distributor/

12 collector for radiator connection
at sealing
collector Multidis SH for
radiator connection, surface
temperature balance (heating/
cooling). Connection of one
actuator for each connected
circuit.
Page 1.132.
12.52 2017
Cocon QTZ Pressure independent Pressure independent control

control valve PN 25 valve Cocon QTZ for central
heating and cooling systems
with closed circuits.
The valve combination consists
of an automatic ow regulator
and a regulating valve. It is also
used for room temperature
control with the help of an
actuator or can be used as
a zone valve.
Page 3.52.
Cocon QFC Pressure independent The pressure independent

control valve PN 16 control valve Cocon QFC is
installed in heating and cooling
systems with closed water
circuit (e.g. central heating
systems, surface heating
systems, fan coil units, chilled
ceilings and fan convectors) for
an automatic ow control
(hydronic balancing) and for
room temperature control via
actuators with a modied ow
rate.
Page 3.56.
Cocon 2TZ Regulating valve PN 10 Regulating valve Cocon 2TZ

eco measuring technique for chilled ceiling installations.
The calculated ow rate is set
at the regulating valve. It is also
used for room temperature 12
control with the help of an
actuator or can be used as a
zone valve.
Page 3.61.
2017 12.53
Hydronic balancing of heating and cooling systems is of major importance for an efcient operation.
This relates for instance to the regulation of radiators, chilled ceiling elements or pipework valves in heating and cooling systems. The status data
is processed or monitored by the centralised building control system.
Oventrop offers valves and controls for different applications which are displayed in the below list.
The valves and controls can be combined with the preceding actuators.
Tri-M plus TR Four-way mixing Page 3.78.

valve with integrated T-piece PN 10
Hycocon ETZ Regulating valve PN 16 High kv value.

with innitely variable presetting Page 3.14.
eco measuring technique
Tri-D TR Three-way diverting valve PN 16 Page 3.79.

DN 20 DN 40
Tri-M TR Three-way mixing valve PN 16 Page 3.79.

DN 20 DN 40
12
Flypass connection sets Consisting of connection tting,
DN 15 DN 20 strainer and Cocon QTZ.
Page 3.69.
Optibal W6 Page 3.65.

Six-way ball valve
DN 15 DN 20
12.54 2017
Heating oil technology Content
Page
14.a General information

Content 14.03
14.b Deaerators, filters

Content 14.07
"Toc-Duo-3" 14.08
Combination heating oil filter/heating oil deaerator
"Toc-Uno" Heating oil deaerators 14.09
Accessories for "Toc-Duo" and "Toc-Uno" 14.09
"Oilpur E A" Heating oil filters for one pipe systems with isolation 14.10
"Oilpur E A R" Heating oil filters for one pipe systems 14.11
with isolation and return flow feed
"Oilpur E " Heating oil filters for one pipe systems without isolation 14.12
"Oilpur Z A " Heating oil filters for two pipe systems with isolation 14.13
Filter cups 14.14
Vacuum gauges 14.14
Filter inserts 14.15
"Oilpur" Heating oil filter for one pipe systems 14.17
14.c Tank equipment

Content 14.19
Screwed tank inlet caps 14.20
Fuel gauge lock 14.20
Caps with chain 14.21
Tank inlet cap with bayonet catch 14.21
Tank inlet caps for export 14.22
Vent caps 14.22
Mechanical level indicators 14.23
Condensate collector 14.23
Tank filling limiters -adjustable- 14.24
Accessories for tank filling limiters 14.26
"Flexo-Bloc" Oil draining facilities 14.27
Double ball foot valves (non-return check valves) 14.29
14
Double ball non-return ball check valves 14.29
Gland fittings 14.30
Flexible suction pipes 14.30
Liquid safety device 14.31
Steel bracket 14.31
Liquid safety device with condensate collector 14.31
Elbow 14.31
Spacer stud made of steel 14.32
Hose nozzles 14.32
2017 14.01
Heating oil technology Content
Page
14.d Heating oil valves in the pipework

Content 14.33
"Oilstop" Anti-siphon valves 14.34
"Olex" Pressure compensation device 14.35
Isolating fittings 14.35
Isolating valve 14.36
Quick acting isolating valve 14.36
Change-over valve 14.36
Double change-over valve 14.36
14.e Fittings
Content 14.39
Connection system summary 14.40
"Ofix-Oil" Compression fittings 14.41
"Ofix-Oil" Couplings (steel, galvanised) 14.42
"Ofix-Oil" Double nipples 14.43
"Ofix-Oil" Double nipple - elbow 14.43
Flexible hoses DIN EN ISO 6806 14.44
Sets of flexible hoses 14.45
Flexible hoses 14.45
14.f Heating oil kits for export

Content 14.47
Oil tank installation kit for the installation of a two pipe system with steel tank 14.48
Oil tank installation kit for the installation of a two pipe system with plastic tank 14.48
Heating oil filter kit for two pipe systems 14.49
Heating oil filter kit for one pipe systems with return flow feed 14.49
Heating oil filter kit for one pipe systems (without return flow feed) 14.49
"Ofix-Oil" Compression fittings (for export only) 14.49
14
14.02 2017
Heating oil technology 14.a General information
Page
14.a General information

Content
14
2017 14.03
Tank equipment Heating oil valves Heating oil filters

in the pipework and deaerators
Example one pipe system The one pipe system:

1. Tank inlet cap There is only one oil pipe from the tank to the filter. The oil flow
2. Vent cap corresponds to the nozzle capacity, i.e. the heating oil consumption
for a heating capacity of 10 kW only amounts to about 1 litre per hour.
3. Tank filling limiter
The oil pipe to the tank should be dimensioned accordingly.
4. Level indicator
One pipe system with return flow feed:
5. Oil draining facility In general, this system features two pipes running from the heating oil
6. Pressure compensation device (if required) filter or heating oil deaerator to the burner pump. The quantity of
heating oil delivered by the burner pump is higher than the quantity of
7. Anti-siphon valve
heating oil consumed. The surplus heating oil is fed back to the pump
8. Combination heating oil filter/heating oil deaerator
14 with vacuum gauge
via the heating oil filter or heating oil deaerator.
One pipe system (without return flow feed):
9. Burner hoses There is only one pipe from the heating oil filter to the burner pump.
The quantity of heating oil delivered by the burner pump is higher than
Further components: the quantity of heating oil consumed, the pump must therefore feature
an internal pressure relief device or a return flow feed. This type of
Connection elements of valves to the pipework
installation is rare.
Isolating device (in the suction pipe, if the isolating device at the
tank cannot be reached directly or has to be actuated with the help
of a release cord) The two pipe system:
Change-over valve (for installations with more than one tank) There are two oil pipes from the tank to the burner pump. The oil flow
corresponds to that of the burner pump.
Isolation fittings (for underground tanks with corrosion protection by
sacrificial anode) This system is no longer recommended for new installations.
14.04 2017
Recommendations regarding the conversion of an existing In general, the components in existing installations can be used for a
two pipe system to a one pipe system: bio proportion up to 5% and new components for a bio proportion up
The suction pipe should be replaced by a correctly sized smaller one to 20% and more. The notes are to be observed.
as the oil flow is much lower. This way, malfunctions caused by
airlocks are avoided. According to DIN 4755, velocities between 0.2 Recommendations when changing to bio heating oil (low
and 0.5 m/s are recommended. sulphur heating oil with bio proportion):
The advice in the installations instructions and data sheets must be
A one pipe system is strongly recommended for the pipework.
observed.
Check whether existing components are suitable for the
The installation of a heating oil deaerator or a combined heating oil
designated bio proportion and replace them, if necessary.
filter/heating oil deaerator Toc-Duo is recommended.
Note: A two pipe filter cannot be used as one pipe filter with return Before filling, the heating oil tank should be empty.
flow feed! The tank should be cleaned and the residual oil be disposed of.
Old oil pipes should be removed. Filter inserts with a large filter surface should be used, for instance
opticlean. This does especially apply if the tank has not been
cleaned.
Note regarding liquid fuels:
Reasons:
Heating oil is a liquid fuel produced from fossil mineral oil. In order to
save the fossil deposits, liquid fuels which are extracted from Bio proportions (FAME) may release existing deposits which may
regenerative raw materials, the so-called alternative additives or block the filter inserts.
bio oils can be added to the heating oil. This is amongst others bio Heating oil returning in two pipe systems may have an adverse
diesel (FAME = fatty acid methyl esters). effect on the storage life of the oil.
The fatty acids of the bio oils may cause damage to conventional The mix of old, sulphurous and new, low sulphurous heating oil can
seals and hoses. lead to corrosion at the flame tubes of the burner (metal dusting).
14
2017 14.05
Heating oil technology 14.b Deaerators, filters
Page

Content
"Toc-Duo-3" 14.08
"Toc-Uno" Heating oil deaerators 14.09
Accessories for "Toc-Duo" and "Toc-Uno" 14.09
"Oilpur E A" Heating oil filters for one pipe systems with isolation 14.10
"Oilpur E A R" Heating oil filters for one pipe systems 14.11
with isolation and return flow feed
"Oilpur E " Heating oil filters for one pipe systems without isolation 14.12
"Oilpur Z A " Heating oil filters for two pipe systems with isolation 14.13
Filter cups 14.14
Vacuum gauges 14.14
Filter inserts 14.15
"Oilpur" Heating oil filter for one pipe systems 14.17
14
2017 14.07
"Toc-Duo-3"
"Toc-Duo-3" Metal model
Heating oil technology Combination heating oil filter/heating oil deaerator
Article m Article-No. Hint
"Toc-Duo-3" Oventrop
Combination heating oil filter/heating oil deaerator DIN EN

12514-2
with integrated isolation and wall bracket
Max. nozzle capacity: 110 l/h EL type of heating oil TV tested according to DIN EN 12 514-2.
Max. flow of returned Sign of conformity (sign ) according to valid
heating oil: 120 l/h EL type of heating oil rules of construction.
Min. deaeration capacity: 6 l/h air DIN tested (reg.-no.: 2 Y 111).
Connections: Application:
tank side G female thread Heating oil installations according to DIN 4755
for connection of compression fittings 6, 8, 10 and 12 mm for EL type of heating oil according to DIN
(sets of compression fittings to be ordered separately, item no. 51603-1.
21276..: page 14.41)
burner side G male thread with inner taper for
burner hoses with G collar nut "Toc-Duo-3" also for heating oils with
"alternative additives" or with a bio proportion
Siku (sintered plastic) 25 - 40 2142732 up to 20% according to DIN SPEC 51603-1.
"opticlean" MC-7 5 - 20 2142735
"opticlean" long MX-11 ~2 2142737 Combination of heating oil filter and deaerator
for use in one pipe systems with return flow
feed. For suction systems only. Deaerator
body made of metal, filter cup and deaerator
cap made of transparent plastic for easy
function control.
The heating oil filter/heating oil deaerator
features an isolation, a wall bracket, a vacuum
gauge (optional) and a filter cup.
similar to 2142732,
Installation is possible below and above the oil
but burner side female thread G (not illustr.)
level.
Siku (sintered plastic) 50 - 75 2142700 Installation instructions are to be observed
strictly.
similar to 2142732 but additionally
Advantages:
with vacuum gauge
"opticlean" MC-7 5 - 20 2142754 fine filtering

Siku (sintered plastic) 25 - 40 2142762 long service life
integrated isolation
vacuum gauge to control the filter
contamination (optional)
"Toc-Duo-3" Metal model

similar to 2142754, "Toc-Duo-3" with deaerator cap and filter cup

but with deaerator cap and filter cup made of metal made of metal also for EL A Bio type of heating
14 and vacuum gauge oil according to DIN SPEC 51603-6 with a bio
proportion up to 100%, FAME as well as
"opticlean" MC-7 5 - 20 2152754 various thin vegetable oils.
14.08 2017
"Toc-Uno" Heating oil deaerators
Heating oil technology Accessories for "Toc-Duo" and "Toc-Uno"
Packing
unit
"Toc-Uno" Heating oil deaerators Oventrop
DIN EN
12514-2
"Toc-Uno-A"
Heating oil deaerator
Sign of conformity (sign ) according to valid
with wall bracket
rules of construction.
DIN tested (reg.-no.: 2 Y 111).
Max. nozzle capacity: 110 l/h EL type of heating oil
Max. flow of returned
heating oil: 120 l/h EL type of heating oil
Min. deaeration capacity: 6 l/h air
Application:
Connections: Heating oil installations according to DIN 4755
- tank side G female thread, for EL type of heating oil according to DIN
with flexible hose for connection to heating oil filter, 51603-1.
G male thread x G collar nut, 300 mm long
- burner side G male thread with inner taper "Toc-Uno-A" also for heating oils with
for burner hoses with G collar nut "alterntive additives" or with a bio proportion
up to 20% according to DIN SPEC 51603-1.
2142951
Heating oil dearator for an automatic
deaeration of heating oil installations.
Connections:
- tank and burner side G female thread, For use in one pipe systems with return flow
without accessories feed. For suction systems only. Body of
deaerator made of metal with bracket for wall
2142901 installation. Deaerator cap made of transparent
plastic for an easy function control.
Connections:
- tank and burner side G female thread, Installation is possible below and above the oil
with the following accessories: level.
2 double nipples G male thread x G male thread Installation instructions are to be observed
with inner taper for burner hoses with G collar nut strictly.
2142900
"Toc-Uno-B"
Heating oil deaerator
with wall bracket "Toc-Uno-B" with deaerator cap made of metal
also for EL A Bio type of heating oil according
similar to 2142951, 2152951 to DIN SPEC 51603-1 with a bio proportion up
but deaerator cap made of metal to 100%, FAME as well as various thin
vegetable oils.
Accessories for "Toc-Duo" and "Toc-Uno"
Flexible hose Flexible hose for the connection of the

300 mm long, according to DIN EN ISO 6806 with ring gasket, preinstalled heating oil filter. 14
G male thread x G collar nut
NI 8 (also for "Toc-Uno-B") 2162993
Bracket For all "Toc-Uno/Duo"

and screws (50) 2142992
To expel vapour emissions in badly

Hose nipple with 10 m hose 2142990 ventilated boiler-rooms.
For "Toc-Duo"/"Toc-Uno".
2017 14.09
Heating oil technology "Oilpur E A" Heating oil filters for one pipe systems with isolation
Packing
unit
"Oilpur E A" Heating oil filters for one pipe systems with isolation Oventrop
quick acting isolating valve with double O-ring seal, DIN EN

12514-2
body made of brass, with bracket,

with transparent filter cup for suction
Sign of conformity (sign ) according to the
valid rules of construction.
DN 10, G female thread x male thread
burner side male thread G with inner taper for
hose connection,
tank side female thread G
(The female thread G on the tank side can be connected
with Oventrop brass compression fittings 6, 8, 10 or 12 mm.
Sets of compression fittings to be ordered separately.)
Application:
Felt 50 - 75 (10) 2123503
Heating oil installations according to DIN 4755,
Siku (sintered plastic) 50 - 75 (10) 2123561
for EL type of heating oil according to DIN
51603-1.
Also for heating oils with "alternative additives"

or with a bio proportion up to 20 % according
Siku - Magnum 25 - 40 (10) 2123871 to DIN SPEC 51603-6 (marking A on the body).
If this filter is equipped with a metal filter cup,
the bio proportion may be up to 100 %.
The flow rates depending on the pressure loss

and the filter insert can be obtained form the
technical information "Heating oil filters".
Award:
Magnum b d Busse Design Ulm

Longlife Design Award
similar to 2123503,
but with metal cup PN 16
"opticlean" 5 - 20 (10) 2153554
DN 10 G female thread
Stainless steel 100 - 150 (10) 2123103

14 Siku (sintered plastic) 50 - 75 (10) 2123261
DN 15 G female thread
Stainless steel 100 - 150 (10) 2123104
Accessories for filters: Page 14.14

Accessories for the pipe connection: Page 14.41
14.10 2017
"Oilpur E A R" Heating oil filters for one pipe systems
Heating oil technology with isolation and return flow feed
Packing
unit
"Oilpur E A R" Heating oil filters for one pipe systems Oventrop
with isolation and return flow feed DIN EN

12514-2
quick acting isolating valve with double O-ring seal,

airvent expelling air prior to operation,
body made of brass, with bracket, Sign of conformity (sign ) according to the
with transparent filter cup for suction valid rules of construction.
hose connection,
Sets of compression fittings to be ordered separately.) Application:
Stainless steel 100 - 150 (10) 2122403 for EL type of heating oil according to DIN
Felt 50 - 75 (10) 2122503 51603-1.

to DIN SPEC 51603-6 (marking A on the body).
Siku - Magnum 25 - 40 (10) 2121871 If this filter is equipped with a metal filter cup,

and the filter insert can be obtained from the
Function:
In one pipe systems with return flow feed the
heating oil fed back by the burner pump is
directed to the suction side inside the heating
oil filter.
A partial quantity is fed through the filter insert
again (multiple filtration). This partial quantity is
automatically adjusted depending on the return
flow quantity (patented). Possible airlocks are
reduced by the repeated flow through the filter
Magnum insert.
similar to 2122403, These filters may only be installed if the burner

but with metal cup PN 16 pump allows for a return pressure of 1 bar.
"opticlean" 5 - 20 (10) 2152554 Advantages:
DN 10, G female thread Reduced airlocks due to multiple filtration

(The female thread G on the tank side can be connected No whistling sounds during constant
with Oventrop brass compression fittings 6, 8, 10 or 12 mm. operation.
Sets of compression fittings to be ordered separately.) The burner is switched off in heating oil 14
suction systems if the burner hose breaks
Stainless steel 100 - 150 (10) 2122103 (air is drawn in).
The suction pressure should be low as vapours
expelled by the heating oil can only be vented
manually.
DN 15, G female thread If vapour emissions are to be expected, the
installation of a heating oil deaerator (e. g.
Siku (sintered plastic) 50 - 75 (10) 2122262 "Toc-Duo" page 14.08) is recommended.
Care should be taken that the suction pipe is
sized correctly.
Award:
b d Busse Design Ulm

Longlife Design Award

2017 14.11
Heating oil technology "Oilpur E " Heating oil filters for one pipe systems without isolation
Packing
unit
"Oilpur E " Heating oil filters for one pipe systems without Oventrop
isolation DIN EN
12514-2
body made of brass,

transparent filter cup for suction
DN 8, G female thread

with Oventrop brass compression fittings 6, 8, 10 or 12 mm. Application:
Sets of compression fittings to be ordered seperately.) Heating oil installations according to DIN 4755,
Stainless steel 100 - 150 (10) 2124203 51603-1.

Stainless steel 100 - 150 (10) 2124204 or with a bio proportion up to 20 % according
Siku (sintered plastic) 50 - 75 (10) 2124362 to DIN SPEC 51603-6 (marking A on the body).
and the filter insert can be obtained from the
14

14.12 2017
Heating oil technology "Oilpur Z A " Heating oil filters for two pipe systems with isolation
Packing
unit
"Oilpur Z A " Heating oil filters for two pipe systems with isolation Oventrop
quick acting isolating valve with double O-ring seal, DIN EN

12514-2
non-return check valve on the return side,

body made of brass, with bracket,
transparent filter cup for suction Sign of conformity (sign ) according to the
valid rules of construction and DIN
approval (reg.-no.: 2 Y 118)

hose connection,
Sets of compression fittings to be ordered separately.) Application:
Stainless steel 100 - 150 (10) 2120403 for EL type of heating oil according to DIN
Felt 50 - 75 (10) 2120503 51603-1.

to DIN V 51603-6 (marking A on the body).
Siku - Magnum 50 - 75 (10) 2120803

and the filter insert can be obtained form the
technical information "Heating oil filters":
Function:
In two pipe systems the heating oil fed back by
Magnum the burner pump is returned to the tank via a
non-return check valve. If the hose on the
DN 10, G female thread return side is loosened for maintenance work,
the non-return check valve keeps the oil in the
(The female thread G on the tank side can be connected return pipe.
Sets of compression fittings to be ordered separately.) Award:
Sika 0 50 - 100 (10) 2120003 b d Busse Design Ulm

(sintered bronze) Longlife Design Award
Stainless steel 100 - 150 (10) 2120103
14
Stainless steel 100 - 150 (10) 2120104

2017 14.13
Filter cups
Heating oil technology Vacuum gauges
Packing
unit
Filter cups Application:

for heating oil filters "Oilpur" with collar nut and "Toc-Duo" Heating oil installations according to DIN 4755,
for EL type of heating oil.
O-ring for sealing (10) 2166500 Also suitable for bio heating oils.
filter cup/filter head
Collar nut (100) 2126600
Transparent filter cup for (25) 2126751

suction systems

suction systems for "Magnum"

suction systems for "opticlean" long
Metal filter cup 2126754

for pressurised systems PN 16
Conversion set for heating oil filters "Magnum"
consisting of filter cup, (10) 2120891

filter insert (Siku 50 - 75 m)
and O-ring
Bracket (not illustr.) Not suitable for "Toc-Uno"/"Toc-Duo".
DN 10 (50) 2126803
DN 15 (50) 2126804
Handwheel (not illustr.)
DN 8/ 10 (10) 2126951
DN 15 (10) 2126952
Oil-Filter
Multi purpose spanner 2126691 To loosen the collar nut of the Oventrop
for heating oil filters heating oil filters and the "Toc-Duo".
Vacuum gauges The vacuum gauge serves to control the

with connection fitting degree of contamination of the filter. It is
installed directly behind the filter in the suction
for filters with female thread pipe to the burner.
on the burner side
Pivoting display allowing any positioning.
14 R x Rp (10) 2120285
for filters with male thread

on the burner side
G c/nut x G with inner taper (10) 2120585
14.14 2017
Heating oil technology Filter inserts
Packing
unit
Filter inserts Most of the filter inserts may not be cleaned

The filter inserts have a bayonet catch. With due consideration of the and have to be replaced at the beginning of
size of the filter cup, they are interchangeable (except for filter each heating period.
cartridge PN 10). According to DIN 4755, heating oil installations
have to be installed frost-free as oil of low
temperature expels paraffin which may block
the filter. The finer the filter, the more this
phenomena applies.
"opticlean" Fine filter insert The filter insert "opticlean" consists of a special
paper and allows for the finest filtering with a
short MC-7 5 - 20 (25) 2126454 very large surface.
long** MC-18 5 - 20 (10) 2126474
long** MX-11 ~2 (10) 2126484 The "opticlean" fine filter insert with a mesh
size of 5 - 20 m is especially recommended
** only suitable for filter cup "opticlean" long for small and medium burner capacities in one
pipe systems. It is are also recommended for
installations which are operated with bio
heating oils.
Bio heating oils may dissolve coarse deposits
which may block filter inserts with a small
surface.
The "opticlean" fine filter insert MX-11 with a

mesh size of ~ 2 m is a "high end" filter. The
filter material developped by the car industry
features a micro fibre fleece surface and is
especially suitable for small pipes or very fine
burner nozzles.
Filter surface:
MC-7 (short) ~ 700 cm
MC-18 (long**) ~ 1850 cm
MX-11 (long**) ~ 1200 cm
To avoid blocking of these fine filter inserts,

they have to be operated at a frost-free
location.
Sintered plastic The sintered plastic insert (Siku) consists of a

mass of miniature plastic balls. Its surface is
Siku 50 - 75 (25) 2126300 enlarged by the inwards drawn form. Possible
(500) 2126351 burner malfunctions caused by erosion of fibre
25 - 40 (25)
(500)
2126354
2126356
particles or similar are avoided. In case of
heavily polluted heating oil, the longer model
14
(Magnum) is recommended which increases
the service life.
Filter surface: Siku ~ 100 cm
Siku-Magnum ~ 185 cm
The fine filter inserts (25-40 m) have a red
bayonet.
Siku for "Magnum" 50 - 75 (10) 2126355

25 - 40 (10) 2126371
2017 14.15
Heating oil technology Filter inserts
Packing
unit
The felt insert provides very fine filtering and

Felt 50 - 75 (25) 2126200 many ageing by-products of the heating oil are
(350) 2126251 filtered out. A fine tissue almost completely
retaining the felt fibres is integrated on the
inside. Individual felt fibres may, however, not
be retained by the tissue and reach the burner
nozzle. The felt insert is not recommended for
smalller burner capacities.
Filter surface: ~ 53 cm
The stainless steel insert is a rugged insert

Stainless steel 100 - 150 (25) 2126100 and provides good quality of filtering coarse
impurities. It is a typically long lasting insert
especially suitable for installations with higher
capacities. It can be cleaned with heating oil
or detergent.
Sintered bronze The sintered bronze insert (Sika) consists of a

mass of miniature bronze balls. It is
Sika 0 50 - 100 (25) 2126051 dimensionally stable but is not easy to clean.
Adapter to connect the cartridge to any

Adapter for conversion to (25) 2120691 Oventrop filter housing with bayonet catch (size
cartridges DN 15 only for models manufactured since end
of 1991).
14
The filter cartridge is a fine paper filter offering

Cartridge PN 10 25 2126400 a long service life due to its large surface.
Moreover, it can be installed in pressurised
systems up to 10 bar.
The Oventrop heating oil filters "Oilpur" can be
converted using the adapter, item no.
2120691 for the filter cartridge.
The tool for cartridge includes with 2 spanners

Tool for cartridge 2126695 to hold the filter cartridge firm while tightening.
14.16 2017
Heating oil technology "Oilpur" Heating oil filter for one pipe systems
Packing
unit
"Oilpur" Heating oil filter for one pipe systems Supply of EL type of heating oil to individual
brass body, with isolating valve stoves from one central point of storage.
transparent filter cup for suction systems Flow capacity:
100 l/h with p = 50 mbar
both ports female thread, 150 l/h with p = 100 mbar
plastic fibre mesh insert 80 m
Only for suction systems.
DN 10 G 2125003 After replacing the transparent filter cup by a
brass filter cup these filters can also be used
(The female threads G can be connected with for pressurised systems.
Oventrop brass compression fittings 6, 8, 10 or 12 mm.
With marking "A" also for heating oils with

Accessories "alternative additives" or with a bio proportion
up to 20 % according to DIN SPEC 51603-6.
Plastic fibre mesh insert 80 m 2129000
the bio proportion may be up to 100%.
Transparent filter cup 2129102
Brass filter cup PN 6 (10) 2129152
O-ring 2129200
14
2017 14.17
Heating oil technology 14.c Tank equipment
Page
14.c Tank equipment

Content
Screwed tank inlet caps 14.20
Fuel gauge lock 14.20
Caps with chain 14.21
Tank inlet cap with bayonet catch 14.21
Tank inlet caps for export 14.22
Vent caps 14.22
Mechanical level indicators 14.23
Tank filling limiters -adjustable- 14.24
Accessories for tank filling limiters 14.26
"Flexo-Bloc" Oil draining facilities 14.27
Double ball foot valves (non-return check valves) 14.29
Double ball non-return ball check valves 14.29
Gland fittings 14.30
Flexible suction pipes 14.30
Liquid safety device 14.31
Steel bracket 14.31
Liquid safety device with condensate collector 14.31
Elbow 14.31
Spacer stud made of steel 14.32
Hose nozzles 14.32
14
2017 14.19
14.c Tank equipment
Screwed tank inlet caps
Heating oil technology Fuel gauge lock
Packing
unit
Screwed tank inlet caps Application:

suitable for padlocking, with seal and chain Heating oil installations according to DIN 4755.
If not stated otherwise, all products are made
Tank inlet cap of brass.
tapered connection *
*Filling nipples with tapered sealing are also
G2 x G 2 cap (25) 2010053 suitable for flat sealing connection.
flat sealing connection
G2 xG2 cap (25) 2010152

Rp 2 x G 2 cap (25) 2010153
G2 x G 2 cap (5) 2010154
G3 xG3 cap (2) 2010155
tapered connection, * This tank inlet cap is recommended for use

lockable in any position, with bio fuels (e. g. rape oil).
therefore especially suitable for Owing to the coating of the filling nipple, any
areas prone to flooding contact of the oil with copper is avoided.
G2 x G 2 cap (10) 2010073
tapered connection, * For marking of installations which are suitable

lockable in any position, for "low sulphur EL type of heating oil".
therefore especially suitable for
areas prone to flooding,
with green cap for "low sulphur EL type of
heating oil" and additional red tag
"Also suitable for standard EL type of heating oil"
G2 x G 2 cap (10) 2010083
Tank inlet cap (export model)

flat sealing connection,
thread Rd 72 x 1/6
(Shell)
G2 (25) 2010316
Fuel gauge lock

with seal and chain
G1 x G 1 cap (25) 2013051
Universal fuel gauge lock G 1

quick acting lock with fixing device
for fuel gauge, lockable
14 G1 (20) 2014151

14.c Tank equipment
Caps with chain
Tank inlet cap with bayonet catch
Heating oil technology Tank inlet caps with bayonet catch
Packing
unit
Caps with chain
G 1 (thread of cap) 2018090

G2 (thread of cap) 2018092
G3 (thread of cap) 2018095
lockable in any position,

therefore especially suitable for
areas prone to flooding,
also for subsequent installation
G 2 (thread of cap) (20) 2018073
as above, but green powder coated For marking of installations which are suitable
and with additional red tag for "low sulphur EL type of heating oil".
"Also suitable for standard EL type of heating oil"
G 2 (thread of cap) (20) 2018083
Tank inlet cap with bayonet catch The tank inlet caps according to DIN EN
based on DIN EN 14420-6 14420-6 (formerly DIN 28450) are also called
consisting of coupling VK (brass) with thread Rp 2, road tanker couplings.
cap MB (brass) and chain The hose couplings of the road tankers can be
directly connected to the tank inlet caps
DN 50 Rp 2 (10) 2010851 without adapter.
VK 50 + MB 50
The coupling with threaded connection Rp 2
Tank inlet caps with bayonet catch complies with the specifications of the TRwS
according to DIN 14420-6 791-1 for new tank installations.
consisting of coupling VK (brass),
cap MB (brass or aluminium) and chain
DN 50 G2 (10) 2010816
VK 50 (brass) + MB 50 (brass)
DN 80 G3 (5) 2010824
VK 80 (brass) + MB 80 (brass)
DN 100 G4 (5) 2010832
VK 100 (brass) + MB 100 (aluminium)
similar to 2010816, but with green cap MB 50 For marking of installations which are suitable
for "low sulphur EL type of heating oil" and for "low sulphur EL type of heating oil".
additional red tag "Also suitable for
standard EL type of heating oil"
DN 50 G2
VK 50 (brass) + MB 50 green (brass)
(10) 2010882 14
Tank inlet cap with bayonet catch
according to DIN EN 14420-6
cap MB (brass or aluminium) and chain
DN 50 (10) 2018192
MB 50 (brass)
DN 80 (5) 2018195
MB 80 (brass)
DN 100 (5) 2018197
MB 100 (aluminium)
similar to 2010816, but with green cap MB 50 For marking of installations which are suitable
for "low sulphur EL type of heating oil" and for "low sulphur EL type of heating oil".
additional red tag "Also suitable for
standard EL type of heating oil"
DN 50 (10) 2018182
MB 50 green (brass)
2017 14.21
14.c Tank equipment
Tank inlet caps for export
Heating oil technology Vent caps
Packing
unit
Tank inlet caps for export According to French standard NF E-29-572.

Brass tank inlet caps (System Guillemin, see also EN 14420-8).
Coupling with male thread
DN 50 G2 (20) 2010516
Coupling with female thread
DN 50 G2 (20) 2010616
Cap
DN 50 (20) 2010716
Vent caps Application:

brass Heating oil installations according to DIN 4755.
without screen
DN 20 G (50) 2020006
DN 25 G1 (50) 2020008
DN 32 G 1 (50) 2020010
DN 40 G 1 (50) 2020012
DN 50 G2 (20) 2020016
DN 65 G 2 (10) 2020020
DN 80 G3 (5) 2020024
with screen (export model) According to DIN 4755 vent caps with screen
are inadmissible.
DN 20 G (50) 2020106 The screens of the vent caps DN 20 - DN 50
DN 25 G1 (50) 2020108 are made of plastic, the screens of the vent
DN 32 G 1 (50) 2020110 caps DN 65 and DN 80 are made of brass.
DN 40 G 1 (50) 2020112
DN 50 G2 (20) 2020116
DN 65 G 2 (10) 2020120
DN 80 G3 (5) 2020124
14
14.22 2017
14.c Tank equipment
Mechanical level indicators
Heating oil technology Condensate collector
Packing
unit
Mechanical level indicators Application:

Heating oil installations according to DIN 4755.
Mechanical level indicator
infinitely adjustable, Content measuring of cylindrical and
for tank depths between 100 and 200 cm, rectangular tanks for EL type of heating oil.
square display
Diameter of float approx. 44 mm.
G 1 2060012
Mechanical level indicator Also suitable for areas prone to flooding.

odour-tight model, Diameter of float approx. 38 mm.
infinitely adjustable,
for tank depths between 0 and 200 cm,
round display
G 1 (300) 2060312
Mechanical level indicator Recommended for plastic tanks which are no

Set for subsequent installation, longer fully transparent so that the filling height
for plastic tanks without free screw-in opening can hardly be controlled.
with installation accessories
odour-tight model,
infinitely adjustable,
for tank depths up to 200 cm
2060200
Pneumatic level indicator For cylindrical tanks in horizontal or vertical

infinitely adjustable, position as well as rectangular tanks. Max.
for tank depths between 100 and 300 cm, length of level indicator pipe 50 m. Connection
with scale graduated in % for pipe diameter 6 mm.
Level indicator pipe not included.
2060400
Condensate collector
6 x 6 mm (2) 2061051
(Condensate collector with hose connection 4 mm: page 14.32)
14
2017 14.23
14.c Tank equipment
Heating oil technology Tank filling limiters -adjustable-
Probe
length
Tank filling limiters -adjustable- Application:

Heating oil installations according to DIN 4755.
Tank filling limiter with fixed fitting for wall installation for the following
tanks/underground tanks: These tank filling limiters are defined as a
-Cylindrical tanks in horizontal position made of steel sensor for tanks with current interface as part
according to DIN 6608, DIN 6616, DIN 6617, EN 12285-1, of an overfill protection device of type B and
EN 12285-2 and DIN 6624 type of construction B 1 according to EN
-Cylindrical tanks in vertical position made of steel 13616.
according to DIN 6619 and DIN 6623
-Flat-bottom tanks according to DIN 4119 Tank filling limiters are type tested and have a
cabled, CE marking.
with different probe lengths depending on the depth of the dome shaft
The overfill protection device being a part of a
G1 400 mm 2130051 supply system, avoids that a maximum tank
G1 700 mm 2130052 filling height is exceeded.
G1 1000 mm 2130053
G1 1500 mm 2130054 The tank filling limiters may be installed in
metal or non-metal tanks below and above
ground level with a maximum height of 5 m for
Tank filling limiter with ~ 5 m cable and fitting for wall installation fuels.
for the following storage basins/tanks:
-Storage basins according to DIN 6620 The tank filling limiters also comply with the
(battery tanks lower connection) specifications of TRbF 511.
-Storage basins according to DIN 6625 (height 1 - 4 m)
("tanks welded in the cellar")
-Battery storage basins made of plastic with general construction
approval, for installation of up to 25 individual storage basins in
series Storage fluids:
-Tanks made of thermoplastics according to DIN EN 12573, parts 1-3 -EL type of heating oil (e.g. according
-Tanks made of thermoplastics according to DIN EN 13341, parts 1-3 to DIN 51603-1)
-GFK tanks and storage basins above ground level according to -Diesel oil (e.g. according to EN 590)
DIN EN 13121, parts 1-3 -Fatty acid methyl esters (FAME) as heating oil
(e.g. according to EN 14213)
G1 385 mm 2130108 -Fatty acid methyl esters (FAME) as bio diesel
oil (e.g. according to EN 14214)
Tank filling limiter probe for replacement purposes, not illustr. -Mixtures of heating oil/diesel oil with
(as 2130108, but without screw-in fitting and without fitting FAME and/or vegetable oils
for wall installation)
385 mm 2130150
Tank filling limiter with ~ 5 m cable, fitting for wall installation

and mechanical level indicator,
infinitely adjustable for storage basins/tanks
with depths between 100 and 200 cm,
-Storage basins according to DIN 6620
(battery tanks lower connection)
14 ("tanks welded in cellars")
approval, for installation of up to 25 individual storage basins in
series
-Tanks made of thermoplastics according to DIN EN 12573, parts 1-3
-GFK tanks and storage basins above ground level according to
DIN EN 13121, parts 1-3
G 1 385 mm 2130512
14.24 2017
14.c Tank equipment
Heating oil technology Tank filling limiters -adjustable-
Packing
unit
"Flexo-Bloc"
Oil draining facility for storage basins/tanks with a max. height of 2 m,
with connections for one and two pipe systems,
combined with tank filling limiter, probe length 385 mm,
without level indicator pipe.
Supply and return connection G female thread and enclosed
brass compression fittings 10 and 12 mm.
Tank filling limiter with ~ 5 m cable and fitting for wall installation
approval
G 1 (5) 2052351
14
2017 14.25
14.c Tank equipment
Heating oil technology Accessories for tank filling limiters
Accessories for tank filling limiters
Plug-in fittings for tank filling limiters 2133000 Includes the flanged socket, type 901.
for installation to pipe
TW 904
for wall installation 2133100 Includes the flanged socket, type 901.
TW 905
Plug-in couplers for extension cables
Coupler plug 2133200 Includes the flanged socket, type 901.

TW 902
Coupler socket 2133300 To plug onto the tank filling limiter or

TW903
TW 903 accessories, see above.
The battery operated unit may only be used for

Testing unit for tank filling limiters 2134100 checking the tank filling limiters installed in
(pluggable) heating oil or diesel oil tanks.
GRENZWER TGEBER for checking the function The use is not allowed in hazardous locations
PRFGERT
Nur fr Heizle u.
of tank filling limiters or for tank filling limiters installed in tanks with
Dieselkraftstof fe
Bedienungsanleitung beachten !
(short circuit, interruption) potentially explosive media. The unit is
Art.-Nr .: 213 41 00
supplied without batteries.
59939 Olsberg
14
14.26 2017
14.c Tank equipment
Heating oil technology "Flexo-Bloc" Oil draining facilities
Max. tank Packing

height unit
"Flexo-Bloc" Oil draining facilities Oventrop
DIN EN
May also be used for self-monitoring suction

12514-2
pipes after having removed the non-return ball.

Flexo-Bloc valid rules of construction.
for two pipe systems, Application:
supply and return connection G female thread with Heating oil installations according to DIN
brass compression fittings 10 and 12 mm, 4755, for EL type of heating oil according to
with level indicator pipe DIN 51603-1.
G1 2000 mm (10) 2052151

G1 3000 mm (10) 2052152 With marking "A" also for heating oils with
G 1 2000 mm (10) 2052153 "alternative additives" or with a bio proportion
G 1 3000 mm (10) 2052154 up to 20 % according to DIN SPEC 51603-6.
Non-return ball check valve with quick acting

isolation (can be operated by use of a release
"Flexo-Bloc" cord).
Oil draining facility for storage basins/tanks with a max. height of 2 m, Brass compression fittings 6, 8, 10 or 12 mm
with connections for one and two pipe systems, can be connected to the connection threads
combined with tank filling limiter, probe length 385 mm, G (if not enclosed, connection sets have to
without level indicator pipe. be ordered separately: page 14.41).
Supply and return connection G female thread and enclosed In heating oil installations according to DIN
brass compression fittings 10 and 12 mm. 4755, reinforcing sleeves are to be used
Tank filling limiter with ~ 5 m cable and fitting for wall installation when installing copper pipes: page 14.43
approval
G 1 (5) 2052351
"Flexo-Bloc" (floating suction) As for the model with floating suction, the
for one pipe systems, heating oil is drawn off approx. 4 -6 cm below
supply connection G female thread, the oil level.
brass compression fittings 6, 8, 10 or 12 mm 14
to be ordered separately This way only the cleanest oil will be used.
G 1 2000 mm (10) 2052051

G1 2000 mm (10) 2052053
Conversion set
consisting of hose and float
up to 3000 (50) 2052091
2017 14.27
14.c Tank equipment
Heating oil technology "Flexo-Bloc" Oil draining facilities
Max. tank Packing

height unit
"Flexo-Bloc" (export model) Export models:

for two pipe systems, The export models comply with the German
supply and return connection G female thread with regulations if brass compression fittings (page
compression fittings with plastic compression 14.41) are used.
rings for metal pipes 8, 10 and 12 mm,
with level indicator pipe
G2 2000 mm (10) 2053051

G2 3000 mm (10) 2053052
"Flexo-Bloc" (export model)

for one pipe systems,
supply connection G female thread with
compression fittings with plastic compression
rings for metal pipes 6 and 8 mm,
with level indicator pipe
G2 2000 mm (10) 2053351

G2 3000 mm (10) 2053352
G1 2000 mm (10) 2053353
G1 3000 mm (10) 2053354
14
14.28 2017
14.c Tank equipment
Double ball foot valves (non-return check valves)
Double ball non-return ball check valves
Heating oil technology Non-return ball check valves
Packing
unit
Double ball foot valves (non-return check valves) Oventrop
DIN EN
with distance spring (DN 10, DN, 15)

12514-2
or distance foot (DN 20, DN 25)

and stainless steel balls Sign of conformity (sign ) according to the
DN 10 Rp (25) 2030003 Application:

DN 15 Rp (25) 2030004 Heating oil installations according to DIN 4755,
DN 20 Rp (10) 2030006 for heating oil according to DIN 51603-1.
DN 25 Rp 1 (10) 2030008
The valves can also be used for bio heating

oils.
To avoid bimetallic corrosion, the distance
springs are made of spring steel.
Example of the application: page 14.30
Double ball non-return ball check valves

with stainless steel balls
For vertical installation.

DN 10 Rp (25) 2031103
DN 15 Rp (25) 2031104
Non-return ball check valves Oventrop
DIN EN
with handwheel isolation,

12514-2
both ports female thread G

Sign of conformity (sign ) according to valid
G (10) 2033053
Application:
51603-1.
with quick acting isolation,

both ports female thread G with With marking "A" also for heating oils with
brass compression fittings 10 and 12 mm "alternative additives" or with a bio proportion
up to 20% according to DIN SPEC 51603-1.
10/12 mm (10) 2033151
May also be used for self-monitoring suction
pipes after having removed the non-return ball.
The connection threads G can be equipped

with brass compression fittings 6, 8, 10 or
12 mm (if not enclosed, connection sets to be
ordered separately: page 14.41).
In heating oil installations according to DIN 14

4755, reinforcing sleeves are to be used when
Release cord installing copper pipes: page 14.43
for remote operation of quick acting isolating valves
with screws, dowels and lead seal Example of the application: page 14.30
10 m 2052080
2017 14.29
14.c Tank equipment
Gland fittings
Heating oil technology Flexible suction pipes
Packing
unit
Gland fittings Application:

for the introduction of steel, copper Heating oil installations according to DIN 4755.
and iron pipes into the tank
Example of the application: see below
single, for the following pipe dimensions:
R1 x 6/ 8/ 10/ 12 mm (25) 2040050 of brass.
R1 x 14, 15 mm and " (50) 2040053
R1 x 18 mm and " (50) 2040055
R1 x 22 mm and " (25) 2040056
R x 6 mm (50) 2041051
double, for supply and return pipe The return connection is supplied with brass
compression fittings. In heating oil installations
R1 x 8/ 10/ 12 mm (25) 2040152 according to DIN 4755 reinforcing sleeves are
R1 x 15 mm (25) 2040154 to be used when installing copper pipes: page
1.143
Reducers made of anthracite plastic Not suitable for filling pipes.

Set in the following sizes
G 2 x G 1 and G 1 x G 1 (25) 2040090
Flexible suction pipes Application:

with weight, Heating oil installations according to DIN 4755,
upper connection for cutting ring, for EL type of heating oil according to DIN
lower connection G for foot valve 51603-1.
10 mm x 1250 2050051
10 mm x 1500 2050052 The suction pipes are also suitable for heating
10 mm x 1600 2050053 oils with "alternative additives" or with a bio
10 mm x 1750 2050054 proportion up to 20 % according to DIN SPEC
10 mm x 2000 2050055 51603-6.
10 mm x 2500 2050056
Example of the application:
Non-return ball check

valve
Gland fitting
14
Flexible suction pipe
Double ball foot valve
14.30 2017
14.c Tank equipment
Liquid safety device
Heating oil technology Elbow
Packing
unit
Liquid safety device Only for holders of a type approval.

for the suction and measuring pipe,
lower connection G female thread and Liquid safety devices have to be checked by an
G male thread, inspector and are thus TV approved.
upper connection M 18 x 1.5 mm
with taper ball socket for connection of hose Note:
The installation of a condensate collector with
(10) 2073051 brass cup is recommended for tanks with inner
jackets made of PVC in which petrol containing
ethanol is stored. Ethanol can diffuse via the
Counternut G inner jacket and cause damage to the
suitable for liquid safety device transparent cup in the long term.
Brass cup, item no. 2129152: page 14.17
(100) 2076004
Example of installation:
Steel bracket
to fit the liquid safety device (10) 2076100

on the dome cover
Elbow
(item no. 207 40 51)
Liquid safety device with condensate collector Liquid safety device with condensate collector
and bracket for fitting on dome cover (item no. 2073151) fitted on the dome cover
and connection pipes.
Hose connections 4 + 6 mm (10) 2073161
of brass.
Elbow
with counternut and two seals,
for the introduction of the suction and the measuring
pipe into the tank
Outer hose connection (50) 2074061 14

4 and 6 mm
Hose connection in the tank 6 mm
as above, but extended with copper pipes
Outer hose connections (50) 2074261

4 and 6 mm
Hose connection in the tank 6 mm
2017 14.31
14.c Tank equipment
Spacer stud made of steel
Hose nozzles
Heating oil technology Condensate collector
Packing
unit
Spacer stud made of steel Is required if the hose pipe is not led to the
tank bottom.
with inner fixing device (25) 2076200
for the elbows item no. 2074051
and 2074251
Hose nozzles
with female thread M 18 x 1.5

and inner taper for hose I.D.
4 and 6 mm (100) 2075061

10 mm (50) 2075053
with male thread G

for hose I.D.
4 and 6 mm (50) 2075161

10 mm (50) 2075153
with male thread G

for hose I.D.
4 and 6 mm (100) 2075261
Condensate collector Note:

The installation of a condensate collector with
Hose connections 2072061 brass cup is recommended for tanks with inner
4 and 6 mm I.D jackets made of PVC in which petrol containing
ethanol is stored. Ethanol can diffuse via the
Condensate collector with compression fitting 6 mm: page 14.23 inner jacket and cause damage to the
transparent cup in the long term.
Brass cup, item no. 2129152: page 14.17
14
14.32 2017
Heating oil technology 14.d Heating oil valves in the pipework
Page

Content
"Oilstop" Anti-siphon valves 14.34
"Olex" Pressure compensation device 14.35
Isolating fittings 14.35
Isolating valve 14.36
Quick acting isolating valve 14.36
Change-over valve 14.36
Double change-over valve 14.36
14
2017 14.33
Heating oil technology "Oilstop" Anti-siphon valves
"Oilstop" Anti-siphon valves
"Oilstop V" Diaphragm anti-siphon valve

General construction supervising Diaphragm anti-siphon valves are installed in
admission by DIBt: Z - 65.50 - 305. the suction pipes of heating oil installations
Infinitely adjustable safety heights between 1 m and 4 m, according to DIN 4755, where the maximum
lead sealable, venting facility for initial operation, with isolating tank filling point is above the lowest point of
facility, pressure balanced in the direction of the tank, the suction pipe. The infinitely adjustable safety
permissible ambient temperature: -25 C up to +60 C, height allows for an adaptation to the
therefore also suitable for use in the dome shaft. requirements of the system.
max. oil flow 200 l/h, both ports female thread G
for connection of compression fittings 6, 8, 10 or 12 mm The valve is approved for EL type of heating oil
(sets of compression fittings to be ordered separately) and "bio heating oil" with a FAME proportion
up to 15 % according to DIN SPEC 51603-6,
2104203 e.g. heating oil DIN 51603-6 EL A Bio 15.
Installation instructions must be observed.

TV tested according to DIN EN 12514-2.
For further informatioin see

Awards:
iF-Ecology Design Award TOP 3
Design Award Schleswig-Holstein
"Oilstop MV" Solenoid valve

General construction supervising admission
by DIBt: Z 65.50 456.
The solenoid valves Oilstop MV shut off the
2104553 oil pipe between the tank and the
for safety heights up to 3 m*, subsequent installation of one and two pipe
pressure balanced in the direction of the tank, systems if the burner is not in operation. It is
closed with current "off", ~ 230 V / 50 Hz, thus avoided that the oil in the tank is siphoned
protection: IP 65 with socket off in case of a leakage.
max. oil flow 100 l/h
both ports female thread G * These solenoid valves can be used on the
14 suction pipe up to 0.9 bar.
The installation instructions must be observed.
The materials used are also suitable for heating

oils with "alternative additives" or with a bio
proportion up to 100 % according to DIN
SPEC 51603-6.
Note regarding two-pipe systems:

Only the suction pipe to the boiler can be
protected by anti-siphon valves. They do
not impact the return pipes of two pipe
systems. The return pipes in two pipe
systems should have free drainage into the
tank so that the tank cannot be siphoned off
via the return pipe when the burner is not in
operation.
14.34 2017
"Olex" Pressure compensation device
Heating oil technology Isolating fittings
Packing
unit
"Olex" Pressure compensation device Oventrop
DIN EN
both ports female thread G

12514-2
for connection of compression fittings 6, 8, 10 und 12 mm

(sets of compression fittings to be ordered separately: page 14.41) Sign of conformity (sign ) according to valid
(5) 2107003 Application:
51603-1.
With marking A also for heating oils with

"alternative additives" or with a bio proportion
up to 20 % according to DIN SPEC 51603-6.
"Olex" is a pressure compensation device

according to DIN EN 12514-2 for oil pipes in
which a thermal conditional volume expansion
and therefore a pressure increase in the
pipework may occur.
Pipe content to be compensated:

Max. 730 cm3 with a temperature increase of
40 K (e. g. from 0 C to 40 C).
Pipe dimension Max. pipe length

[mm] [m]
6x 1 58
8x 1 27
10 x 1 15,5
12 x 1 10

Isolating fittings To avoid any harmful effects of galvanic and

both ports coupling vagrant current, the DIN standard 4755
recommends the installation of such isolating
6 x 6 mm (10) 2080851 fittings.
8 x 8 mm (10) 2080852
For suction systems.
10
12
x 10 mm
x 12 mm
(10)
(10)
2080853
2080854
14
15 x 15 mm (10) 2080855 TV tested according to TRbF 521/6.51-2.
18 x 18 mm (10) 2080856
Couplings made of galvanised steel, cutting
rings made of brass.
In heating oil installations according to DIN
4755, reinforcing sleeves are to be used when
installing copper pipes: page 14.43
2017 14.35
Isolating valve
Quick acting isolating valve
Change-over valve
Heating oil technology Double change-over valve
Packing
unit
Isolating valve Application:

brass Pipeworks PN 16 for mineral, heating and
needle type straight pattern valve hydraulic oils, air PN 6.
DN 8 G (10) 2091002
Quick acting isolating valve Application:

for a quick isolation (quarter turn operation). Heating oil installations according to DIN 4755,
Isolating valve made of brass according to DIN EN 12514-2 for light heating oils on mineral oil basis, e. g.
and DIN 4817-1, PN 16, straight pattern, EL type of heating oil.
with coupling according to DIN 2353,
collar nut made of galvanised steel, Further applications:
brass cutting ring. Liquid gas according to DIN 51622 (DVGW-G
approved), as well as compressed air.
6 x 6 mm (20) 2100051
8 x 8 mm (20) 2100052 In heating oil installations according to DIN
10 x 10 mm (20) 2100053 4755, reinforcing sleeves are to be used when
12 x 12 mm (20) 2100054 installing copper pipes.
15 x 15 mm (20) 2100055 Reinforcing sleeves for soft pipes with a wall
thickness 1 mm: page 14.43
Change-over valve Application:

brass (quick acting model), Heating oil installations according to DIN 4755,
according to DIN EN 12514-2, PN 6, for light heating oils on mineral oil basis, e. g.
with coupling according to DIN 2353 EL type of heating oil.
made of galvanised steel, brass cutting ring.
For the quick isolation or change-over of the
6 x6 x 6 mm (10) 2102051 fuel supply, for instance for heating oil
8 x8 x 8 mm (10) 2102052 installations (one pipe system) with 2 tanks.
10 x 10 x 10 mm (10) 2102053
12 x 12 x 12 mm (10) 2102054
Double change-over valve Application:

ball type, brass Fuel installations.
G (6 x) 2103260 Temperature range: 0 C up to 60 C

Pressure range: -0.6 bar up to 10 bar
Oventrop double change-over valve (with

compulsory change-over) for the connection of
two storage tanks to one burner in two pipe
systems.
By throwing over the lever, the supply and the

return pipe of one tank are isolated and the
14 supply and return pipe of the other tank are
released.
Also for fuels with "alternative additives" or

with a bio proportion up to 20 %, e.g. heating
oil according to DIN SPEC 1606.6.
14.36 2017
Heating oil technology Other products for heating oil
Hygate Gate valves Page5.12
Piston type spring assisted check valves Page5.26
Optigas Ball valves Page5.07
14
2017 14.37
Heating oil technology 14.e Fittings
Page
14.e Fittings
Content
Connection system summary 14.40
"Ofix-Oil" Couplings (steel, galvanised) 14.42
"Ofix-Oil" Double nipple - elbow 14.43
Flexible hoses DIN EN ISO 6806 14.44
Sets of flexible hoses 14.45
Flexible hoses 14.45
14
2017 14.39
14.e Fittings
Heating oil technology Connection system summary
Connection of pipes and valves in heating oil installations

Valve connection
Female G 38 female G 38 male Coupling

thread thread with thread with supplied
additional additional with valve
connection inner taper
for Oventrop for hose
compression connection
fittings
Pipe Additional couplings/connection fittings
Producer Producer
Material Examples Type Examples
Compression
fitting Ofix-Oil X
(page 14.41)
Wieland Compression
Copper pipe
Kabelmetall or cutting ring
Couplings
Ofix-Oil X X
(page 14.42)
Not required if compression fitting

X
is integrated in the valve
Not required for flexible hose

X X X
with female and/or male thread
Oventrop
Flexible hoses
(Page 9.46)
14
Double nipple
Double nipple Ofix-Oil X X
(page 14.43)
Mannesmann
Steel pipe Not required for threaded connection X
Thyssen
Subjet to alteration.
14.40 2017
14.e Fittings
Heating oil technology "Ofix-Oil" Compression fittings
Packing
unit
"Ofix-Oil" Compression fittings Application:

brass These compression fittings are only suitable for
Oventrop products for heating oil installations
For two pipe filters Oilpur, Flexo-Bloc (two pipe), with female thread G with compression
diaphragm anti siphon valves, solenoid valves and pressure contour.
compensation devices In heating oil installations according to DIN
size DN 10 4755 reinforcing sleeves are to be used when
installing copper pipes: page 14.43.
Connection set
(set consisting of two compression fittings)
6 mm (50) 2127050
8 mm (50) 2127051
10 mm (50) 2127052
12 mm (50) 2127053
For "Oilpur" one pipe filters , one pipe filters with return flow feed,
"Toc-Duo" as well as "Flexo-Bloc" (one pipe)
size DN 10 The metal compression fittings are also
(set consisting of one compression fitting) resistant to bio heating oils.
6 mm (50) 2127650
8 mm (50) 2127651
10 mm (50) 2127652
12 mm (50) 2127653
Compression ring
6 mm (50) 2127150
8 mm (with intermediate ring) (50) 2127151
10 mm (with intermediate ring) (50) 2127152
12 mm (50) 2127153
Compression nut
6 mm (50) 2127250
8 mm (50) 2127251
10 / 12 mm (10) 2127253
Connection system
Brass and steel couplings,
brass reinforcing sleeves: from page 14.43
14
2017 14.41
14.e Fittings
Heating oil technology "Ofix-Oil" Couplings (steel, galvanised)
Packing
unit
"Ofix-Oil" Couplings (steel, galvanised) Application:

brass cutting ring Pipe connection for heating oil installations,
series L, DIN 2353 compressed air, hydraulic, propane gas.
Straight coupling Temperature range: -20 C up to +120 C

Pressure: PN 100, up to 15 PN 160
R x 6 mm (25) 2083051
R x 6 mm (25) 2083061 In heating oil installations according to DIN
x 8 mm (25) 2083052 4755, reinforcing sleeves are to be used when
x 10 mm (25) 2083063 installing copper pipes: page 14.43
R x 6 mm (25) 2083060
R x 8 mm (25) 2083053 The metal couplings are also resistant to bio
x 10 mm (25) 2083054 heating oils.
x 12 mm (25) 2083055
R x 10 mm (25) 2083056
x 12 mm (25) 2083057
x 15 mm (10) 2083058
G x 18 mm 2083059
Straight coupling, flat sealing
G x 6 mm (25) 2083074
x 8 mm (25) 2083075
x 10 mm (25) 2083076
Straight coupling
6 x 6 mm (25) 2083251
8 x 8 mm (25) 2083252
10 x 10 mm (25) 2083253
12 x 12 mm (25) 2083254
15 x 15 mm (10) 2083255
18 x 18 mm 2083256
Straight coupling, reduced
8 x 6 mm (25) 2083350
10 x 8 mm (25) 2083351
12 x 10 mm (25) 2083353
Elbow coupling
6 x 6 mm (25) 2083451
8 x 8 mm (25) 2083452
10 x 10 mm (25) 2083453
12 x 12 mm (25) 2083454
15 x 15 mm (10) 2083455
14 T-coupling Other dimensions on demand.
6 x6 6 mm (25) 2083551
8 x8 8 mm (25) 2083552
10 x 10 10 mm (25) 2083553
12 x 12 12 mm (25) 2083554
15 x 15 15 mm 2083555
Collar nut Thread
6 mm (50) 2083751 M 12 x 1.5

8 mm (50) 2083752 M 14 x 1.5
10 mm (50) 2083753 M 16 x 1.5
12 mm (50) 2083754 M 18 x 1.5
15 mm (25) 2083755 M 22 x 1.5
18 mm (25) 2083756 M 26 x 1.5

14.e Fittings
"Ofix-Oil" Double nipples
Heating oil technology "Ofix-Oil" Double nipple - elbow
Packing
unit
Cutting ring
6 mm (50) 2083851
8 mm (50) 2083852
10 mm (50) 2083853
12 mm (50) 2083854
15 mm (25) 2083855
18 mm (25) 2083856

8 mm (100) 2083952
12 mm (100) 1029652 the pipe.
15 mm (50) 1029654
18 mm (50) 1029656
"Ofix-Oil" Double nipples Application:

brass Heating oil installations according to DIN
4755 for EL type of heating oil.
both ports with inner taper
for connection hose/hose The double nipples are also resistant to bio
heating oils.
G xG (10) 2080050
G xG (10) 2080051
G xG (10) 2080053
G xG (10) 2080052
with one inner taper

for connection hose/burner or valve
G * x NPT (10) 2080251

G * x NPT (10) 2080252
G * x NPT (10) 2080255
G * xR (10) 2080151
G * xR (10) 2080352
G * xR (10) 2080353
G * xR (10) 2080354
G * x G (10) 2080253
G * x G (10) 2080254
G * x G (10) 2080351
*with inner taper
14
"Ofix-Oil" Double nipple - elbow
brass
with one inner taper
for connection hose/burner or hose/valve
G * x NPT (10) 2080451

G * x R (10) 2080452
* with inner taper
2017 14.43
14.e Fittings
Heating oil technology Flexible hoses DIN EN ISO 6806
Hose
length
Flexible hoses DIN EN ISO 6806 Application:

both ports with collar nut G for EL type of heating oil according to DIN
with tapered seal 51603-1.
NI 8 500 mm 2110051
750 mm 2110052 Up to a maximum temperature of 70 C, the
1,000 mm 2110053 flexible hoses are also suitable for heating oils
1,250 mm 2110054 with "alternative additives" or with a bio
1,500 mm 2110055 proportion up to 20 % according to DIN SPEC
51603-6.
For higher bio proportions or temperatures up

both ports with collar nut G to 100 C, burner hoses with diffusion tight
with tapered seal inner layer are for instance to be used.
NI 12.5 750 mm 2110056 Flexible hoses with outer sleeve made of

1,000 mm 2110057 galvanised wire mesh PN 10.
1,250 mm 2110058
1,500 mm 2110059 Flexible hoses may be used as connection
between solid pipe and burner or feeder unit.
both ports with collar nut G and tapered seal,
one port straight, one port with 90 elbow
NI 8 500 mm 2110071
750 mm 2110072
1,000 mm 2110073
one port G male thread,

one port with collar nut G
with tapered seal
NI 8 500 mm 2110151
750 mm 2110152
1,000 mm 2110153
1,250 mm 2110154
1,500 mm 2110155
one port NPT male thread,

with tapered seal
NI 8 500 mm 2110251
750 mm 2110252
1,000 mm 2110253
14 1,250 mm
1,500 mm
2110254
2110255
one port G male thread,

with tapered seal
NI 8 300 mm 2110350
500 mm 2110351
750 mm 2110352
1,000 mm 2110353
1,250 mm 2110354
1,500 mm 2110355
14.44 2017
14.e Fittings
Sets of flexible hoses
Heating oil technology Flexible hoses
Hose
length
both ports with length of steel pipe Application:

for connection of coupling Heating oil installations according to DIN 4755,
NI 8 8 x 8 mm 300 mm 2110551 51603-1.
500 mm 2110552
750 mm 2110553
1,000 mm 2110554
Up to a max. temperature of 70 C, the
NI 10 10 x 10 mm 300 mm 2110555
flexible hoses are also suitable for heating
500 mm 2110556
oils with "alternative additives" or with a bio
750 mm 2110557
proportion up to 20% according to DIN
1,000 mm 2110558
SPEC 51603-1.
NI 10 12 x 12 mm 300 mm 2110559
500 mm 2110560
For higher bio proportions or temperatures up
750 mm 2110561
to 100 C, burner hoses with diffusion tight
1,000 mm 2110562
inner layer are for instance to be used.
Flexible hoses with outer sleeve made of

galvanised wire mesh PN 10.
Flexibles hoses may be used as connection

between solid pipe and burner or feeder unit.
Further flexible hoses with special connections

for the different burner types on request.
Sets of flexible hoses Application:

based on DIN EN ISO 6806. Heating oil installations according to DIN 4755.
Flexible rubber hoses with diffusion tight inner layer
and outer sleeve made of galvanised wire mesh.
They are resistant to bio heating oils and EL type of Due to the diffusion tight inner layer also
heating oil, PN 10, thermal resistance up to 100 C. suitable for heating oils with "alternative
additives" according to DIN V 51603-6 and
both ports G collar nut with tapered seal other liquid fuels which are burned for heating
Set = 2 pieces purposes, such as FAME according to DIN EN
14213, RME, rape oil, palm oil, etc.
NI 6.3 500 mm 2111051
750 mm 2111052 These flexible hoses are also suitable for
1,000 mm 2111053 systems with increased return temperatures,
1,500 mm 2111055 e. g. miniature CHP.
Flexible hose Flexible hose for the connection of the

300 mm long, according to DIN EN ISO 6806 with ring gasket, preinstalled heating oil filter.
G male thread x G collar nut
NI 8 (also for "Toc-Uno-B") 2162993
14
2017 14.45
Heating oil technology 14.f Heating oil kits for export
Page
14.f Heating oil kits for export

Content
Oil tank installation kit for the installation of a two pipe system with steel tank 14.48
Oil tank installation kit for the installation of a two pipe system with plastic tank 14.48
Heating oil filter kit for two pipe systems 14.49
Heating oil filter kit for one pipe systems with return flow feed 14.49
Heating oil filter kit for one pipe systems (without return flow feed) 14.49
"Ofix-Oil" Compression fittings (for export only) 14.49
14
2017 14.47
Oil tank installation kit for the installation of a two pipe system Application:
with steel tank Heating oil installations
consisting of: Plastic compression fittings are not

"Flexo-Bloc" approved in Germany.
with compression fittings 8, 10 and 12 mm
item no. 2053051 G 2 x 2000 mm
"Oilpur" heating oil filter, both ports female thread,

with nickel mesh insert,
item no. 2120103 G
"Ofix-Oil" compression fitting

for the connection of the heating oil filter to the tank side
item no. 2127500 8, 10 and 12 mm
Coupling and cap according to French
Coupling with female thread standard NF E-25-572.
item no. 2010616 G 2
Cap
item no. 2010716 G 2
Double nipple
item no. 2080360 G 2
Vent cap
item no. 2020110 G 1
packed in a carton 2064351
Oil tank installation kit for the installation of a two pipe system
with plastic tank
consisting of:
"Flexo-Bloc"
with compression fittings 8, 10 and 12 mm
item no. 2053051 G 2 x 2000 mm
"Oilpur" heating oil filter, both ports female thread

with nickel mesh insert
item no. 2120103 G
"Ofix-Oil" compression fitting

for the connection of the heating oil filter to the tank side
item no. 2127500 8, 10 and 12 mm
Vent cap
14 item no. 2020110 G 1
packed in a carton 2065351

as above, but packed in a plastic case 2064051
14.48 2017
Packing
unit
Heating oil filter kit for two pipe systems
consisting of:
Oilpur heating oil filter, both ports female thread,

item no. 2120103 G
Ofix Oil compression fitting

item no. 2127500 8, 10 and 12 mm
packed in a carton (10) 2120153
Heating oil filter kit for one pipe systems with return flow feed
consisting of:
Oilpur heating oil filter, both ports female thread

with nickel mesh insert
item no. 2122103 G
Ofix Oil compression fitting

item no. 2127700 8, 10 and 12 mm
Heating oil filter kit for one pipe systems (without return flow feed)
consisting of:
Oilpur heating oil filter, both ports female thread

item no. 2123103 G
Ofix-Oil compression fitting

item no. 2127700 8, 10 and 12 mm
"Ofix-Oil" Compression fittings (for export only) Plastic compression fittings are not
plastic for metal pipes approved in Germany and must therefore
Compression fittings (interchangeable) for not be installed.
Oilpur" heating oil filters G , "Flexo-Bloc" and "Toc-Duo"
- compression ring made of plastic, nuts made of brass -
for metal pipes
2-fold, for two pipe filters (50) 2127500

8, 10 and 12 mm
plastic compression rings 14
1-fold, for one pipe filters (50) 2127700
8 mm
8, 10 and 12 mm
plastic compression rings
10 mm
12 mm
2017 14.49
Different system applications Content
Page
17.a Different system applications

Content 17.03
Heat distribution/Hydraulics 17.04
Air conditioning 17.05
Heat pump 17.08
Geothermics 17.09
Combined heat and power (CHP) 17.10
Photovoltaics/Smart Grid 17.11
Local heating/Domestic transmission station 17.12
District heating/biomass installations 17.13
Solar cooling 17.14
Large solar plant 17.15
Wood burning boiler 17.16
Visualization/Monitoring 17.17
17
2017 17.01
Different system applications 17.a Different system applications
Page

Content
Heat distribution/Hydraulics 17.04
Air conditioning 17.05
Heat pump 17.08
Geothermics 17.09
Combined heat and power (CHP) 17.10
Photovoltaics/Smart Grid 17.11
Local heating/Domestic transmission station 17.12
District heating/biomass installations 17.13
Solar cooling 17.14
Large solar plant 17.15
Wood burning boiler 17.16
Visualization/Monitoring 17.17
17
2017 17.03
Different system applications Heat distribution/Hydraulics
1 2 1 2 1 2
3 3 3
1 2 1 2 1 2
3 3 3
1 2 1 2 1 2
3 3 3
1 2 1 2 1 2
3 3 3
5 5 5
4 4 4
6
7 8
9
10
System heat distribution/hydraulics (example)

No. Oventrop article Item no. Catalogue page
1 AQ Thermostatic valve 1183... 1.42
2 Uni Thermostat 1011... 1.08
3 Radiator lockshield valve with presetting 109... 1.128
4 Bronze oblique pattern globe valve PN 25 with draining facility
(fill and drain ball valve G 14) 10503... 5.18
5 Bronze oblique pattern globe valve PN 25 without draining facility 10502... 5.18
6 Strainer PN 25 112... 5.32
17
7 Regumat M3-180 Station 13562... 6.22
8 Expa-Con Valve with lead sealable cap 10890... 6.123
9 MSM-Block Boiler safety device with insulation 13510... 6.123
10 Optiflex Brass ball valve 1033... 6.124
Further component
A Heat generator (e.g. oil/gas/heat pump/solid fuels)
17.04 2017
Different system applications Air conditioning
Heatingzone1Heatingzone2
1 1
2 3
24 V/230 V
Heating/cooling
(C/Osignal)
5
Heatingzone1Heatingzone2
Heat
pump A
Systemclimate(example1)
No.Oventroparticle Itemno. Cataloguepage

1R-TronicRTBWirelessthermostat 115088012.12
R-TronicRTFB 115088112.12
R-TronicRTFCK 115088212.12
2R-ConWirelessreceiver 115077212.13
3R-ConHCExtensionmoduleheating/cooling115077412.13
4FK-CFWirelesswindowcontact115307012.16
5AktorT2PElectrothermalactuator101241512.14
6MultidisSFStainlesssteeldistributor/collector14043..12.58
7RP-SFWirelessrepeater 115069912.16
Furthercomponent
A Heatpump 17
2017 17.05
3 4
2 2
System climate (example 2)

1 R-Tronic RT B Wireless thermostat 1150880 12.12
R-Tronic RTF B 1150881 12.12
R-Tronic RTFC K 1150882 12.12
2 Aktor MH CON B Electronic actuator for wireless thermostats 1150665 12.13
3 FK-C F Wireless window contact 1153070 12.16
4 Synet CR Communication centre 1150687 12.11
5 R-Con 2P Wireless receiver (1 channel) 1150710 12.15
17
17.06 2017
4
2
System climate (example 3)

1 Flypass 4 TZ Connection fitting 11495.. 3.72
2 Cocon QTZ Pressure independent control valve 114... 3.72
3 Strainer 11410.. 3.72
4 Electric actuator (two point) 1..... 3.89
5 Room thermostat (digital) 115... 3.87
6 Insulation shell for connection fitting Flypass 1149581 3.75
Further component
A Radiant/chilled ceiling
17
2017 17.07
Different system applications Heat pump
5 6
1
3
4 2
System with heat pump (example)

1 Heating circuit connection group for heat pumps 1356972 6.54
2 Connection set for safety group for diaphragm expansion tank 1356989 6.54
3 Safety group 1351598 6.54
4 Hydrocor HP Buffer storage cylinder 13850.. 10.18
5 Regumat S-130 Station 1355073 6.09
6 Regumat M3-130 Station 1355273 6.10
7 Distributor DN 25 1351571 6.62
8 Cofloor Surface heating 140.... 2.40
Further components
A Heat pump
B Radiator circuit
17
17.08 2017
Different system applications Geothermics
9
B 10
12 7
6
5 11
11
4 3
8 8 8
13
A 1
14
Geothermal system (example)

1 Hydrocor Storage cylinder 1385... 10.18
2 HydroFixx Hydronic header 1351... 6.64
3 Regumat F Station for thermally controlled surface heating systems 1354... 6.41
4 Regumat S Station 1355... 6.06 T
5 A Thermostatic valve 1181... 1.62
6 Actuator 1...... 1.26
7 Combi 2/3/4 Radiator lockshield valves 109.... 1.128-1.130
8 Cofloor Surface heating system 140.... 2.40
9 Floorbox Return collector 102.... 2.11
10 Unibox E BV Room temperature control 1022662 2.20
11 Unibox RLA Isolating and regulating function 1022663 2.20
12 Unibox RTL Return temperature limitation 10226.. 2.23
13 Boiler storage cylinder connection 1359... 6.120
14 Hycoflow VTB Double regulating and commissioning valve with flow display 10609.. 3.50
Further components
A Heat pump
B
C
Radiator circuit
Geothermal system with borehole collector/underground loop collector
17
2017 17.09
Different system applications Combined heat and power (CHP)
CHP system (example)

1 Regucor WH Energy storage centre 13834.. 10.06
2 Uni XH/LH Thermostats 1011... 1.08
3 Multiflex V/F Fittings 1015... 1.120
Further component
17 A CHP installation
17.10 2017
Different system applications Photovoltaics/Smart Grid
B
E
1
C
System photovoltaic/Smart Grid (example)

1 Regucor WHS Energy storage centre 138356. 10.06
2 Electric immersion heater 1383590 10.11
Further components
A Photovoltaic/solar module
B Inverter
C System manager
D Terminal appliances
E Li-ion storage
17
2017 17.11
Different system applications Local heating/Domestic transmission station
13
10 10 10
11 11 11
3
8
6 6
7
1
5
2
A 12 4
System district heating/domestic transmission station (example)

1 Regudis H-HT District heating station 1391025 7.08
2 Ball valve connection set 1399090 7.08
3 Diaphragm expansion tank 1399091 7.09
4 Hydrocor WM Monovalent potable water storage cylinder 139501. 7.09
5 Distributor 135.... 6.62
6 Regumat M3-180 Station 13562.. 6.14
7 Regumat S-180 Station 13560.. 6.13
8 Regucirc B Circulation station 4206776 8.52
9 Domestic water station 42045.. 8.68
17 10 Uni XH/LH Thermostats 1011... 1.08
11 Multiflex F/V Fittings 101.... 1.120
12 Strainer 112.... 5.32f
13 Cofloor Surface heating system 140... 2.40
Further component
A District heating network
17.12 2017
Different system applications District heating/biomass installations
8
2 3 6 2
1
District heating (e.g. biomass plant)
1 7 4 7 1 4
5
System district heating/biomass plant (example)

1 Optibal Ball valve PN 40 (alternatively isolating valve 10650..) 10656 .. 5.11
2 Strainers PN 16/PN 25 10680 .. 5.32
3 Hydromat QTR Differential pressure regulator (female thread) 10615.. 3.36
(male thread with collar nut) 10616.. 3.36
4 Hydromat DTR Differential pressure regulator (female thread) 10645.. 3.37
5 Optibal Ball valve PN 40
(alternatively isolating valve 10650..) 10666.. 5.11
6 Hydrocontrol ATR Isolating and orifice valve (female thread) 10675.. 3.34
7 Tailpipes 106.... 3.45
8 AV 9 or AQ Thermostatic valve 118.... 1.50
9 Heat exchanger 13517.. 6.44
17
2017 17.13
Different system applications Solar cooling
Cooling Heating
6 7
8
8 7 6
4 2
3
System solar cooling (example)

1 OKF Flat-plate collector 136134. 9.43
2 Regusol X-Duo 25-B Station 1361050 9.19
3 Hydrocor HP Buffer storage cylinder 13850.. 10.18
4 Regumat M3 Station 135.... 6.07
5 Cocon QTR Pressure independent control valve 11461.. 3.56
6 Flypass Connection system 11495.. 3.72
7 Cocon QTZ Pressure independent control valve 11455.. 3.54
8 Actuator (two point) 101.... 3.89
9 Room thermostat with fan drive 1152065 3.88
Further components
A Heat generator (e.g. oil/gas/heat pump/solid fuels)
B Cooling generator
C Cold storage cylinder
D Fan coil
17
17.14 2017
Different system applications Large solar plant
14 14 14
1 1 1
10 10 2 2 2
11
12
8 8 5 4 13
7 7
9 9
6
13
A
System large solar plant (example)

1 OKF-MQ25 Flat-plate collector 1361440 9.43
2 Hydrocontrol STR Double regulating and commissioning valve 1369050 3.32
3 Regtronic RM Electronic controller 1369555 9.26
4 Regusol SH-180 Station DN 32 1368251 9.16
5 Regumat S-180 Station DN 32 1356072 6.21
6 Heat exchanger 1351792 9.27
1351793
7 Hydrocor HP Buffer storage cylinder 1385015 10.18
8 Regumat XZ-30 Station for hot potable water preparation 1381035 6.100
9 Regumaq K-3 Cascade control set 1381083 6.103
10 Regumat M3-280 Station DN 50 1358640 6.37
11 Regumat Distributor DN 40/50 1351692 6.63
12 MSM-Block Boiler safety device 1351062 6.123
13 Diaphragm expansion tank 1361425 9.56
14 Airvent 1368304 9.33
Further component
A Heat generator (e.g. oil/gas/heat pump/solid fuel)
17
2017 17.15
Different system applications Wood burning boiler
Heating
system
Potable water
circulation
system
7
9 5
6
4
3
10 1
A
11
2
8
System with wood burning boiler (example)

1 MSM-Block Boiler safety device with insulation 13510.. 6.123
2 Optiflex Fill and drain ball valve 1033... 6.124
3 Expa-Con Valve with lead sealable cap 10890.. 6.123
4 Regumat RTA-180 Station for solid fuel boilers 13545.. 6.51
5 Connection fitting 1351655 6.66
6 Distributor with insulation 13515.. 6.62
7 Regumat M3-180 Station 13562.. 6.22
8 Aquastrom KFR valve 420.... 8.14 f.
9 Aquastrom VT Thermostatic regulating valve 42065.. 8.29
10 Hydrocor Buffer storage cylinder 13850.. 10.18
11 Hydrocor WM Monovalent potable water storage cylinder 139501. 7.09
Further component
A Wood burning boiler
17
17.16 2017
Different system applications Visualization/Monitoring
A C
WLAN
B
www.portal.oventrop.com Internet TCP / IP
m TCP / IP
co
p.
n tro
C ve
al.o
r t
po 3
w.
ww 1
S-bus
Remote access via the Oventrop internet portal

E
Cold water
Boiler control line
System visualization/monitoring (example)

1 Datalog CS-BS 1 1159095 12.41
2 Regucor WHS Energy storage centre with controller Regtronic RS 13835.. 10.06
3 OKF Flat-plate collector or OKP Tube collector 13612.. 9.40
Further components
A Standard router/switch (e.g. FritzBox)
B Mobile displays (iPhone, iPod touch, iPad, BlackBerry etc.)
C PC/Laptop
D Heat generator (e.g. oil/gas/heat pump/solid fuels)
E Radiator circuit
17
2017 17.17
Service Content
Page
19.a Software, article data, data sets

Content 19.03
Software 19.04
Oventrop App 19.04
Tender specifications 19.04
19.b Measuring gauges

Content 19.05
"OV-DMC 3" Measuring systems 19.06
"OV-DMPC" Measuring systems 19.06
19.c Service
Content 19.07
Slide rules 19.08
Catalogues 19.08
19
2017 19.01
Service 19.a Software, article data, data sets
Page
19.a Software, article data, data sets

Content
Software 19.04
Oventrop App 19.04
Tender specifications 19.04
19
2017 19.03
Service 19.a Software, article data, data sets

Item Note

Software (Windows) The software can be downloaded

from the Internet (www.oventrop.de)
OVplan and is available on the Oventrop DVD.
Software for pipework calculation for heating,
cooling, potable water and surface heating
systems as well as dwelling stations Regudis
OVe.r.p.
Software for the calculation of the energy
efficiency classes of packages according to
the ErP Directives
OVsol
Solar pipework calculation
OVselect
Software for valve design
Oventrop App Functions of the Oventrop App:

Calculation of the energy efficiency
iOS
classes of packages according to
Android
the ErP Directives
Rapid
heat load calculation
according to DIN EN 12831
D etermination of the radiator capacity
T hermostatic valve design
Double
regulating and commissioning
valve design
D ifferential pressure regulator design
T echnical data
O ventrop catalogue
Article data All data can be downloaded
BIM/CAD data from the Internet (www.oventrop.de)
(Building Information Modelling) and is available on the Oventrop DVD.
Formats:
- Revit
- DWG
- VDI 3805
ETIM Classification
VDI 6805 Data sets for

technical software
- Heating
- Potable water
- Surface heating
- Solar thermal energy
- Storage cylinders
Article master data

Formats:
- Excel
- 2ba
19
19.04 2017
Service 19.b Measuring gauges
Page
19.b Measuring gauges

Content
"OV-DMC 3" Measuring systems 19.06
"OV-DMPC" Measuring systems 19.06
19
2017 19.05
Service 19.b Measuring gauges

Item Note

Measuring systems
OV-DMC 3 Measuring system 1069278 999

with interfaces for communication with
standard smartphones, tablets and
personal computers
OV-DMC 2 Measuring system 1069177 999 For measuring flow, differential pressure
(with memory and microprocessor) and temperature and for determining the
presetting for hydronic balancing.
Storage of measured data for print-out.
Further information: page 3.42 and
onwards.
OV-DMPC Measuring system 1069277

999
consisting of:
Differential pressure transmitter DMPC-sensor
with USB interface and software
including extensive accessories for
classic and eco measuring technique
to be discontinued
19
19.06 2017
Service 19.c Service
Page
19.c Service
Content
Slide rules 19.08
Catalogues 19.08
19
2017 19.07
Service 19.c Service
Slide rules
for the design of
valves for hydronic balancing
for surface heating Cofloor
Catalogue
Catalogue Products 9999971
Technical service
Design hotline
Phone Mo Fr 7.30 16.30:
+49 2962 82234
Fax: +49 2962 82602
Mailbox: +49 2962 82333
E-mail: [email protected]
Software hotline
Phone Mo Fr 7.30 16.30:
+49 2962 82303
Fax: +49 2962 82602
Mailbox: +49 2962 82333
E-mail: [email protected]
Technical hotline
Phone Mo Fr 7.30 16.30:
+49 2962 82234
Fax: +49 2962 82602
Mailbox: +49 2962 82333
E-Mail: [email protected]
FAQ (Internet)
www.oventrop.de
19
19.08 2017
General information Content
Page
20.a Indices
Content 20.03
Alphabetical Index 20. 00
Article number, EAN code 20. 00
20.b General conditions

Content 20.51
Standard Terms and Conditions 20.52
20.c Imprint
Content 20.53
Imprint 20.54
2017 20.01
20
General information 20.a Indices
Page
20.a Indices
Content
Alphabetical Index 20. 00
Article number, EAN code 20. 00
2017 20.03
20
20.a Indices
General information Alphabetical Index
Article Page Article Page
A C
"ABR-55" 12.25, 12.31 Cabinets 1.133, 2.62
Adapter 1.17 Cascade control sets 6.103
Adapter for "Cocon QTZ" 3.59 Change-over valves 14.36
Air coniditioning and ventilation 3.99 Check valves 6.130
Airvent PN 25 5.19 Check valves "Flowstop" 6.130
Airvents 2.76, 5.30 Check valve - universal model 6.130
"Aktor M" Electromotive actuators 1.28, 2.73, 3.90, Circulation stations 8.52
6.96 Clamping rail 2.45
"Aktor MH/MD CON B" Electronic actuator for 1.36, 12.13 "classic" measuring technique 3.42, 3.62, 3.98
wireless thermostats Climate meter "i-Tronic TFC" 1.32
"Aktor M ST EIB"Electromotive actuator 1.29, 3.92 "Cocon 2TZ" Regulating valves 3.61
system "EIB" "Cocon QFC"Pressure independent control 3.56
"Aktor M ST LON" Electromotive actuator 1.29, 3.92 valves
system "LON", "Cocon QTR"Pressure independent control 3.56
"Aktor T 2P" Electrothermal actuators (two 1.26 valves
point) "Cocon QTZ"Pressure independent control 1.99, 3.54
"Aktor T ST" Electrothermal actuators (0-10 V) 1.27, 3.89, 12.33 valves
Angle pattern adapter 1.17, 10.10 "Cofit P" 11.12
Angle pattern connection set 2.65 "Cofit PD" 11.22
Anti-siphon valves 14.34 "Cofit PD-HT" 11.48
Anti-theft ring 1.17 "Cofit PDK-HT" 11.30
"Aquamodul" 8.61 "Cofit S" 2.51, 11.32
"Aquamodul"Distributor system for potable 8.59 "Cofloor" Surface heating and cooling 2.01
water Collar nut cover 1.17
"Aquanova Compact" 8.62, 8.70 Collectors "OKF", "OKP" 9.39
"Aquanova Magnum" 8.71 "Combi 2" 1.130
"Aquastom T plus" 8.29 "Combi 3" 1.129
"Aquastrom C" 8.32 "Combi 3G" 1.59
"Aquastrom DT" 12.37 "Combi 4" 1.128
"Aquastrom F" 8.10 "Combi C" 1.128
"Aquastrom FR" 8.22 "Combi E" 1.74
"Aquastrom KFR" 8.14 "Combi LR" 1.130
"Aquastrom M" Measuring and draining device 8.33 "Combi-System" Connection system 11.01
"Aquastrom P" 6.109, 8.33 Components for concrete core activation 2.85
"Aquastrom R" 8.22 Composition pipes "Copipe HS" 11.08
"Aquastrom UP" 8.36 Composition pipes "Copipe HSC" 2.49, 11.06
"Aquastrom UP-MS" Water meter installation 8.41 Compression fittings "Cofit S" 1.91
set Compression fittings "Ofix CEP" 1.140, 3.45
"Aquastrom VT" 8.28 Compression fittings "Ofix K" 1.141, 2.51
Automatic hydronic balancing 1.41 Compression fittings "Ofix-Oil" 14.41
Compression fittings "Snap & Seal" 1.141
B Concrete core activation 2.85
Ball valves "Optibal" brass 5.04 Condensate collectors 14.23
Ball valves "Optibal" bronze 5.11 Connection couplings "Cofit" 11.13
Ball valves "Optibal TW" 8.24 Connection fittings 1.125, 6.109, 8.66
Ball valves "Optiflex" 2.60, 2.76, 2.88, Connection of heat generators to heating 6.01
6.124 circuit/hot water supply
Ball valves DZR "Optibal" 5.09 Connection of the boiler and the storage 6.120
Base mats 2.40 cylinder to the pipework
BIM 19.03 Connection pieces 1.125
Bivalent potable water storage cylinder 10.18 Connection pieces "Cofit" 11.32
"Hydrocor - WB" Connection piping "Regumaq K" 6.103
Blind plugs 1.138 Connection system "Combi-System" 11.01
Boiler connection systems "Regumat" 6.01, 6.09 Connection system for "Bypass-Combi" one 1.86, 1.90, 1.142
Boiler safety device "MSM-Block" 6.123 pipe/two pipe
Brass distributor/collector for industral surface 2.59, 2.87 Connection system for fittings "Multiflex" 1.86, 1.90, 1.140,
heating and cooling systems "Multidis SFI" 1.142, 3.45
Brass reinforcing sleeves 1.143, 9.32, 14.43 Connection system for heating oil valves 14.39
"Brawa-Mix" 8.48, 9.65 Connection system for radiator lockshield 1.140, 3.45
Bronze four-way mixing valve 6.11, 6.24, 6.28 valves "Combi 2/ 3/ 4"
Buffer storage cylinders 10.18 Connection system for thermostatic valves 1.140, 3.45
Buffer storage cylinders "Hydrocor - HP" 10.18 Connection system for valves for water 8.77
Butterfly valves 5.22 distribution
"BWM-C F" 12.26, 12.32 Controller for electrical immersion heater 10.11, 10.20
"Bypass-Combi Duo" 1.86 Control unit "Regufloor H" 2.68
"Bypass-Combi Uno" 1.90 Control unit "Regufloor HC" 2.72
Bypass isolating valve 8.74 Control unit "Regufloor HX" 2.74
Bypass mixing valves 8.75 Conversion fittings 1.136
20.04 2017
20
20.a Indices
Conversion valves 1.93 Elbows "Cofit PD" 11.23

"Copert" 2.50, 11.10 Electrical immersion heater 10.11, 10.20
"Copex" 2.49, 11.10 Electric sensor attached to the pipe 6.96, 10.09
"Copipe HS" 11.08 Electromotive actuator "LON" 1.29
"Copipe HSC" 2.49, 11.06 Electromotive actuators "Aktor M" 1.28, 2.73, 3.90,
Cover 1.18 6.96
"CS-BS" data logger 12.41 Electromotive actuator system "EIB""Aktor M 1.29, 3.92
ST EIB"
D Electromotive actuator system "LON" 1.29, 3.92
DDC "CR-BS" 12.25 Electronic actuator for wireless thermostats 1.36, 12.13
DDC "CR-BX" 12.31 "Aktor MH/MD CON B"
DDC "CS-BS" 12.41 Electronic flow sensor 9.34
DDC "CW-BS" 12.37 Electrothermal actuator (0-10 V)"Aktor T ST" 1.27, 3.89, 12.33
Deaerator 2.76, 5.30 Electrothermal actuators (two point) "Aktor T 1.26
"Demo-Bloc" 1.47, 1.60, 3.21 2P"
Dew point control 2.72, 3.88 Energy storage centre 10.07
Diaphragm anti-siphon valves "Oilstop" 14.34 ETIM 19.03
Diaphragm expansion tanks 9.56, 10.11 Exclusive radiator valves 1.72
Differential pressure regulators "Hycocon DTZ" 3.15 "Expa-Con" 6.123
Differential pressure regulators"Hydromat DFC" 3.38 Expansion strip 2.47
Differential pressure regulators "Hydromat 3.38 Expansion tanks 9.56, 10.11
DFC" Expansion tanks "Solar" 9.56, 10.11
Differential pressure regulators"Hydromat DTR" 3.37
Differential pressure relief valves 6.131 F
Differential pressure transmitter "OV-Connect" 3.97 Fill and drain ball valves 6.126, 8.63
Different system applications 17.01 Fill and drain ball valves for potable water 6.124, 8.63
Distributor/collector for surface heating and 2.58, 2.86 "Optiflex"
cooling systems Filter inserts for heating oil filters 14.16
Distributors for "Regumat" 6.62 Filters 14.07
Distributor system for potable water 8.59 Fittings 14.39
"Aquamodul" Fixing channel 2.24
District heating 7.01, 7.03 Fixing channel with isolating facility 2.14
Domestic water stations 8.68 Fixing material for pipes 11.38
Double ball foot valves 14.29 "FK-C F" 1.37, 2.34, 12.16,
Double nipples "Cofit S" 2.52, 11.33 12.26, 12.32
Double nipples "Ofix-Oil" 14.43 Flanged pipes 6.11, 6.24, 6.28,
Double regulating and commissioning valves 8.32 6.43, 6.55
"Aquastrom C" Flat-plate collectors "OKF" 9.43
Double regulating and commissioning valves 3.12 Flexible hoses 14.44
"Hycocon VPZ" Flexible pipes 9.58
Double regulating and commissioning valves 3.12 Flexible suction pipes 14.30
"Hycocon VTZ" "Flexo-Bloc" 14.27
Double regulating and commissioning valves 3.32, 9.30 "Floorbox MH" 2.11
"Hydrocontrol STR" "Floorbox U" 2.12
Double regulating and commissioning valves 3.29 Floor distributor/collector 1.133
"Hydrocontrol VFC" Flow controller 6.91
Double regulating and commissioning valves 3.31 Flow regulators "Hydromat QTR" 3.36
"Hydrocontrol VFN" Flow sensor 9.34
Double regulating and commissioning valves 3.30 "Flowstop" 6.130
"Hydrocontrol VFR" Flow switch 6.111
Double regulating and commissioning valves 3.31 Flushing station "Regudrain" 8.56
"Hydrocontrol VGC" Flush-mounted valves "Aquastrom UP" 8.36
Double regulating and commissioning valves 3.28 "Flypass 4TZ" 3.72
"Hydrocontrol VPR" "FM-CW K" 12.38
Double regulating and commissioning valves 3.26 "FM-CW Plus" 12.38
"Hydrocontrol VTR" Four-port mixing valves "Tri-M plus TR" 3.78
Double regulating and commissioning valves 3.50, 3.74 Four-way mixing valve 6.11, 6.24, 6.28
with flow display "Hycoflow" Free-flow valves "Aquastrom F" 8.10
Double regulating and commissioning valves 3.32 Fuel gauge locks 14.20
with metering station "Hydrocontrol MPR"
Double regulating and commissioning valves 3.32 G
with metering station "Hydrocontrol MTR" Gate valves 5.14
Draining and venting valves 6.126 Gate valves "Hygate" 5.14
Dry-build system "Cofloor" 2.46 Gauge cock, button type 6.128
"DynaTemp BA" 12.25 Gauge cocks 6.128
"DynaTemp HA" 1.36, 12.13 Gauge isolating valves 6.129
General conditions 1.08
E Gland fittings 14.30
"eco" measuring technique 3.42, 3.62, 3.98 Graduated collar "Uni Clip" 1.17
Elbows "Cofit" 11.14 Gravel plate set "OKF" 9.48
2017 20.05
20
20.a Indices
Inserts for differential pressure relief device 6.11, 6.24

H Isolating and orifice valves "Hycocon APZ" 3.13
Heat exchangers "Regumat" 6.44, 9.27 Isolating and orifice valves "Hycocon ATZ" 3.13
Heating circuit controller "Regtronic EH" 2.70, 6.71, 6.96 Isolating and orifice valves "Hydrocontrol AFC" 3.34
Heating circuit controller "Regtronic RH" 2.70, 6.71, 6.96, Isolating and orifice valves "Hydrocontrol APR" 3.34
12.42 Isolating and orifice valves "Hydrocontrol ATR" 3.34
Heating oil deaerator "Toc-Uno-A" 14.09 Isolating and other pipe fittings 5.01
Heating oil deaerator "Toc-Uno-B" 14.09 Isolating ball valves "Optigas" 5.07
Heating oil filter/Heating oil deaerator "Toc- 14.08 Isolating valves 14.36
Duo-3" "i-Tronic TFC" Climate meter 1.32
Heating oil filters "Oilpur" 14.11
Heating oil filters for two pipe systems 14.13 K
Heating oil flexible hoses 14.44 KFR-valves "Aquastrom KFR" 8.14
Heating oil kits 14.47
Heating oil sets 14.48 L
Heating oil technology 14.01 Level indicators 14.23
Heating oil valves in the pipework 14.33 Liquid safety device 14.31
Heating system filling station 6.123, 8.68 Local and district heating technology 7.01, 7.03
Heat meter connection set 6.58 Lockshield valves "Combi 2" 1.130
Heat meter connection sets 2.64 Lockshield valves "Combi LR" 1.130
Heat pump installation products 6.53
Heat pump installations 6.54 M
Heat transfer liquid 9.42 Manual heads 1.18, 2.77
High-efficiency pumps 6.42, 6.74 Manual radiator valves 1.116
High-efficiency pump Wilo-Yonos PARA 2.69 Manual radiator valves "HR" 1.116
High pressure ball valves "Optibal" 5.11 Manual radiator valves "HRV" 1.116
High-temperature ball valves "Optibal" 5.10, 6.118, 9.67 Measuring and draining device "Aquastrom M" 8.33
"Hycocon APZ" 3.13 Measuring system "OV-DMC 2" 3.95
"Hycocon ATZ" 3.13 Measuring system "OV-DMC 3" 3.94
"Hycocon DTZ" 3.15 Measuring system "OV-DMPC" 3.96
"Hycocon ETZ" 3.14 Measuring systems 3.93
"Hycocon HTZ" 3.14 Mechanical level indicators 14.23
"Hycocon VPZ" 3.12 Metering stations 3.46
"Hycocon VTZ" 3.12 Mixing valve "Tri-M plus TR" 3.78
"Hydrocontrol AFC" 3.34 Mixing valves 6.11, 6.24, 6.59
"Hydrocontrol APR" 3.34 Mixing valves "Tri-M TR" 2.73, 3.79, 9.62,
"Hydrocontrol ATR" 3.34 10.10
"Hydrocontrol MFC" 3.33 "MSM-Block" 6.123
"Hydrocontrol MPR" 3.32 "Multiblock T" 1.78
"Hydrocontrol MTR" 3.32 "Multiblock TF" 1.81
"Hydrocontrol STR" 3.32, 9.30 "Multiblock TQ" Two pipe fitting 1.45
"Hydrocontrol STR" Double regulating and 3.32, 9.30 "Multiblock TQ-RTL" 1.46
commissioning valves "Multiblock T-RTL" 1.82
"Hydrocontrol VFC" 3.29 "Multiblock TU" 1.78
"Hydrocontrol VFN" 3.31 "Multidis Fix B" Pre-assembled stainless steel 2.54
"Hydrocontrol VFR" 3.30 distributor/collector fixed in a cabinet
"Hydrocontrol VGC" 3.31 "Multidis R" Sanitary distributor 11.36
"Hydrocontrol VPR" 3.28 "Multidis SF" 2.58, 2.86
"Hydrocontrol VTR" 3.26 "Multidis SFB" 2.59
"Hydrocor - HP" 10.18 "Multidis SFI" 2.59, 2.87
"Hydrocor - HS" 10.18 "Multiflex F" 1.120
"Hydrocor - WB" 10.18 "Multiflex FQ" 1.118
"Hydrocor - WM" 7.09 "Multiflex V" 1.122
"HydroFixx" Hydronic header 6.64 "Multimodul" 1.124, 11.17
"Hydromat DFC" 3.38
"Hydromat DFC" Differential pressure 3.38 N
regulators Nipples "Cofit S" 2.51, 11.32
"Hydromat DTR" 3.37 Non-return ball check valves 14.29
"Hydromat QTR" 3.36
Hydronic balancing in heating and cooling 3.01
O
systems
Hydronic header 6.64
Oblique pattern globe valves bronze 5.18
Hydronic headers 6.65
"Hygate AFC" 5.15
"Ofix" connection system 1.140, 3.45
"Hygate ATB" 5.14
"Hygate ATR" 5.14, 9.67
Oil draining facilities "Flexo-Bloc" 14.27
I "Oilpur" 14.11, 14.13
Indices 1.08 "Oilstop" 14.34
Industrial surface heating and cooling 2.59, 2.87 "Oilstop MV" 14.34
20.06 2017
20
20.a Indices
"Oilstop V" 14.34 "RBG-C K" 12.32

"OKF" Flat-plate collectors 9.43 "R-Con" Wireless receiver 2.36, 12.13
"OKF" Gravel plate set 9.48 "R-Con 2P" Wireless receiver 1.37, 12.15
"OKP" Tube collectors 9.40 "Regtronic EH" 2.70, 6.71, 6.96
"Olex" 14.35 "Regtronic EM" 2.70, 6.72, 12.43
One pipe system 14.11 "Regtronic RC" 9.25
"Optibal" 5.04, 5.10, 6.118, "Regtronic RC plus" 9.25
9.67 "Regtronic RD-W" 6.95
"Optibal TW" 8.23, 8.24 "Regtronic RH" 2.70, 6.71, 6.96,
"Optibal W6" Six-way ball valve 3.65 12.42
"Optiflex" 2.60, 2.76, 2.88, "Regtronic RM" 9.26
6.124 "Regtronic S-bus" 9.25
"Optiflex" Fill and drain ball valves for potable 6.124, 8.63 "Regubox" Exclusive cabinet 2.63, 6.89
water "Regucirc B" 8.52
"Optigas" Isolating ball valves 5.07 "Regucirc M" 8.53
Oval clamps 9.58 "Regucor WH" 10.08
"OV-DMC 2" 3.95 "Regucor WHP" Energy storage centre 10.15
"OV-DMC 3" 3.94 "Regucor WHS" 10.07
"OV-DMPC" 3.96 "Regudis H-HT" Local heating station 7.08
"OV-Flex" 9.58 "Regudis W-HTE" Dwelling station 6.93
"OV-Flex ST" 9.58 "Regudis W-HTF" 6.83, 6.85
"OVLOND" 1.29 "Regudis W-HTO" Dwelling stations 6.80
"OVLONH" 1.29, 3.92 "Regudis W-HTU Basic" 6.82
"Regudis W-HTU Duo" 6.81
P "Regudis WK" Cooling stations 6.116
"pinox D" 1.14 "Regudis W-TU" 6.80
"pinox H" 1.11 "Regudrain" Flushing station 8.56
Pipe connection elbow 2.15 "Regufloor H" 2.68
Pipe connection T-piece 2.15 "Regufloor HC" 2.72
Pipes "Copert" 2.50, 11.10 "Regufloor HN" 2.68
Pipes "Copex" 2.49, 11.10 "Regufloor HW" 2.68
Pipes "Copipe HS" 11.08 "Regufloor HX" 2.74
Pipes "Copipe HSC" 2.49, 11.06 Regulating sets for surface heating systems 2.79, 2.80
Piston type spring assisted check valves 5.26 Regulating valves "Hycocon ETZ" 3.14
Plastic pipes 2.50, 11.10 Regulating valves "Hycocon HTZ" 3.14
Pneumatic level Indicators 14.23 "Regumaq K" 6.103
Potable water station "Regumaq XH" 6.110 "Regumaq K" Connection piping 6.103
Potable water technology "Aquanova-System" 8.01 "Regumaq X-30" 6.100, 12.48
"Power to heat" 10.13, 10. 00 "Regumaq X-80" 6.107
Pre-assembled stainless steel distributor/ 2.54 "Regumaq XH" 6.110
collector "Multidis Fix B" fixed in a cabinet "Regumaq XZ-30" 6.100, 12.48
Press fittings 11.12, 11.22 "Regumat" 6.09
Press tools 11.43 "Regumat" module distributor 6.62
Pressure balance device "Olex" 14.35 "Regumat F/FR" 6.41
Pressure independent control valves "Cocon" 3.51 "Regumat RTA" 6.50
Pressure test plug 11.20, 11.35 "Regusol" Flushing and filling station 9.42
Products for air conditioning and ventilation 3.99 "Regusol FSA" 9.33
Products for heat pump installations 6.53 "Regusol MAG" 9.56, 10.11
Protective tube for "Copipe" 2.47, 11.38 "Regusol SB" 9.33
Pump ball valves "Optibal P" 6.118 "Regusol SG" 9.33
"Regusol X" Supplementary set 9.35
Q "Regusol X-Duo 25" 9.19, 12.47
Quick acting isolating valves 14.36 "Regusol X-Uno 25" 9.19, 12.47
Reinforcing cap 1.18, 12.27
R Relay module "REM-CW" 12.38
Radiant and chilled ceiling systems 3.103 "REM-CW" Relay module 12.38
Radiator connection 1.124, 11.17 Return temperature limiters 1.113, 2.84
Radiator connection "Multimodul" 1.124, 11.17 "RM- C F" 12.25, 12.31
Radiator connection block 11.17 "RM- C F8" 12.26, 12.32
Radiator connection elbow 11.18 "RM-C K" 12.25
Radiator lockshield valve "Combi 3G" 1.59 "RM-C K8" 12.26
Radiator lockshield valves "Combi 2" 1.130 Roof fixing devices "OKF" 9.49
Radiator lockshield valves "Combi 3" 1.129 Roof hooks 9.41
Radiator lockshield valves "Combi 4" 1.128 Room temperature control "Unibox" 2.19
Radiator lockshield valves "Combi C" 1.128 Room temperature sensor 2.71, 6.73, 12.44
Radiator lockshield valves "Combi E" 1.74 Room temperature sensor with remote control 2.71, 6.73, 6.96,
Radiator lockshield valves "Combi LR" 1.130 12.44
Radiator valve sets "Uniset" 1.59 Rosette covers 1.125, 11.38
Radiator valves with insertion tube 1.87 "RP-C F" 2.34, 12.26, 12.32
"RBG-C F" 12.32 "R-Tronic" Climate display device/control 1.35, 2.33, 12.12
"R-Tronic RT B" 1.35, 2.33, 12.12
2017 20.07
20
20.a Indices
"R-Tronic RTF B" 1.35, 2.33, 12.12 Thermostat "Uni LDV" 1.15
"R-Tronic RTFC K" 1.35, 2.33, 12.12 Thermostat "Uni LDVL" 1.15
Thermostat "Uni LH" 1.09, 2.25
S Thermostat "Uni LHB" 1.10
Sanitary distributor "Multidis R" 11.36 Thermostat "Uni LHZ" 12.27
S-connection fittings 1.95, 1.136 Thermostat "Uni LI" 1.16
Screwed fittings "Cofit" 11.22 Thermostat "Uni LK" 1.16
Screwed fittings "Cofit S" 2.52, 11.33 Thermostat "Uni LM" 1.16
"Sensor GA FD" Dew point control 2.72, 3.88 Thermostat "Uni LO" 1.16
"Sensor LW TH/pipe" Temperature sensors 6.105 Thermostat "Uni LR" 1.16
"Sensor LW TH" Electric sensor attached to 6.96, 10.09 Thermostat "Uni LV" 1.16
the pipe Thermostat "Uni RTL" 1.112, 2.84
"Sensor LW TH" Temperature sensor 6.74, 8.53, 9.26, Thermostat "Uni RTLH" 1.112, 2.25, 2.84
10.11 Thermostat "Uni SH" 1.10
"Sensor LW TQ" Plug-in sensor element 8.30 Thermostat "Uni XD" 1.13
"Sensor LW TQ" Temperature sensor 8.56, 12.37 Thermostat "Uni XH" 1.08
Service 19.01 Thermostat "Uni XHM" 1.08
"SH-Cap" 1.10 Thermostat "vindo TD" 1.14
Smart Home, centralised building control 12.01 Thermostat "vindo TH" 1.11
systems and other electronic controls Thermostatic mixing valve 8.48, 9.65
"Solar" expansion tanks 9.56, 10.11 Thermostatic mixing valves "Brawa-Mix" 8.48, 9.65
Solar buffer storage cylinder "Hydrocor - HS" 10.18 Thermostatic regulating valves"Aquastrom T 8.29
Solar buffer storage cylinders 10.18 plus"
Solar packages "Solcos" 9.52 Thermostatic valve "RFV 9" 1.57
Solar thermal energy 9.01 Thermostatic valves "A" 1.62
"Solcos" Solar packages 9.52 Thermostatic valves "ADV 9" 1.56
Solenoid valve "Oilstop MV" 14.34 Thermostatic valves "AF" 1.53
Special thermostats 1.16 Thermostatic valves "AQ" 1.42
Stainless steel corrugates pipes 9.58 Thermostatic valves "AV 9" 1.50
Stainless steel distributor/collector for surface 2.58, 2.86 Thermostatic valves "AZ H" 1.64
heating and cooling systems "Multidis SF" Thermostatic valves "AZ V" 1.64
Stainless steel distributor/collector for surface 2.59 Thermostatic valves "CV 9" 1.52
heating and cooling systems "Multidis SFB" Thermostatic valves "E" 1.72
Stations for hot potable water preparation 6.99 Thermostatic valves "EQ" 1.44
"Regumaq" Thermostatic valves "KTB" 3.84
Stem extension 5.08 Thermostatic valves "RF" 1.65
Storage cylinder loading set 6.120 Thermostatic valves "RFQ" 1.42
Storage cylinders 10.18 Thermostat with remote control "Uni FD" 1.15
Storage cylinders "Hydrocor" 10.18 Thermostat with remote control "Uni FHZ" 12.27
Straight pattern globe valves bronze 5.18 Thermostat with remote control and additional 1.12, 2.77, 3.84
Strainers 5.32, 8.49, 8.53, remote sensor
9.66 Thermostat with remote sensor "Uni LH" 1.09, 3.84
Suction pipes 14.30 Thermostat with remote sensor "Uni XH" 1.08
Surface heating and cooling "Cofloor" 2.01 Thin layer system 2.43
Surface heating without flow distributor 2.09 Three-way conversion valves 1.93
"Unidis" Three-way diverting and mixing valves "Tri- 2.73, 3.79, 9.62
Swing type check valves 5.26 CTR"
"Synet CR" Gateway 1.39, 2.35, 12.11 Three-way diverting valve "Tri-D plus TB" 3.78
System applications 17.01 Three-way diverting valves "Tri-D TR" 2.73, 3.79, 9.62,
10.10
T Three-way mixing valve 6.11, 6.24, 6.59
Tacker system "Cofloor" 2.44 Three-way mixing valves "Tri-M TR" 2.73, 3.79, 9.62,
Tailpipe set 1.54, 1.95, 3.45 10.10
Tank equipment 14.20 "TKM" Valves 1.92
Tank filling limiters 14.24 "TKM" valves 1.87
Tank inlet caps 14.20 "Toc-Duo-3" Heating oil filter/heating oil 14.08
Temperature controllers 3.81, 9.64 deaerator
Temperature sensors 6.74, 8.53, 9.26, "Toc-Duo-3" Metal model 14.08
10.11 "Toc-Uno-A" 14.09
Thermal drainage protection device 6.52 "Toc-Uno-B" 14.09
Thermostas for radiant and chilled ceiling 3.103 Tools for pipes 11.40, 11.51
systems T-pieces "Cofit P" 11.15
Thermostat "pinox D" 1.14 T-pieces "Cofit PD" 11.24
Thermostat "pinox H" 1.11 TR-250 12.25, 12.31,
Thermostat "Uni CH" 1.11 12.37
Thermostat "Uni FD" 1.15 TR-80 12.25, 12.31,
Thermostat "Uni FH" 1.12, 2.77, 3.84 12.37
Thermostat "Uni FHZ" 12.27 "Tri-CTR" Three-way diverting and mixing 2.73, 3.79, 9.62
Thermostat "Uni L" 1.16 valves
Thermostat "Uni LA" 1.16 "Tri-D plus TB" 3.78
20.08 2017
20
20.a Indices
"Tri-D TR" 2.73, 3.79, 9.62, Valves "AZ H" 1.64

10.10 Valves "AZ V" 1.64
"Tri-M plus TR" 3.78 Valves "CV 9" 1.52
"Tri-M TR" Three-way mixing valves 2.73, 3.79, 9.62, Valves "E" 1.72
10.10 Valves "EQ" 1.44
Tube collectors 9.40 Valves "F" 1.53
Two pipe system 14.13 Valves "HR" 1.116
Two-way valve PN 16 3.81 Valves "HRV" 1.116
Valves "KTB" 3.84
U Valves "RF" 1.65
Underfloor control unit "Regufloor H" 2.68 Valves "RFQ" 1.42
Underfloor control unit "Regufloor HC" 2.72 Valves "RFV 9" 1.57
Underfloor control unit "Regufloor HW" 2.68 Valves for "TKM" system one pipe 1.92
Underfloor control unit "Regufloor HX" 2.74 Valves for "TKM" system two pipe 1.87
"Unibox E BV" 2.10, 2.20 Valves for cooling 3.84
"Unibox E plus" 2.22 Valves for cooling systems 3.83
"Unibox E RTL" 2.22 Valves for water softening 8.73
"Unibox E T" 2.20 Valves PN 16/ 25 5.18
"Unibox E vario" 2.22 Valves with lead sealable cap "Expa-Con" 6.123
"Unibox plus" 2.23 Vent caps 14.22
"Unibox Q plus" 2.18 Ventilation and air conditioning 3.99
"Unibox RLA" 2.20 Venting screws 1.138, 8.64, 8.70,
"Unibox RTL" 2.23 8.72
"Unibox T" 2.20 "vindo RTD" 1.14
"Unibox TQ" 2.18 "vindo TD" 1.14
"Unibox TSH" 2.21 "vindo TH" 1.11
"Uni CH" 1.11
"Uni Clip" 1.17 W
"Unidis" Surface heating without flow 2.09 Wall connection set 12.27
distributor Wall mounted connection pieces "Cofit P" 11.19
"Uni EIB D" 1.29 Wall mounted connection pieces "Cofit S" 11.35
"Uni EIB H" 1.29, 3.92 Wall mounting device for "Regumat" 6.11, 6.24, 6.43,
"Uni FD" Thermostat with remote control 1.15 6.51, 6.55, 6.59
"Uni FH" Thermostat with remote control 1.12, 2.77, 3.84 Water meter installation set "Aquastrom UP- 8.41
"Uni FHZ" 12.27 MS"
"Uni L" 1.16 Wilo-Yonos PARA high-efficiency pump 2.69
"Uni LA" 1.16 Wireless receiver "R-Con" 2.36, 12.13
"Uni LD" 1.13 Wireless receiver "R-Con 2P" 1.37, 12.15
"Uni LDV" 1.15 Wireless thermostat "R-Tronic RT B" 1.35, 2.33, 12.12
"Uni LDVL" 1.15 Wireless thermostat "R-Tronic RTF B" 1.35, 2.33, 12.12
"Uni LH" 1.09, 2.25 Wireless thermostat "R-Tronic RTFC K" 1.35, 2.33, 12.12
"Uni LHB" 1.10
"Uni LHZ" 12.27
"Uni LI" 1.16
"Uni LK" 1.16
"Uni LM" 1.16
"Uni LO" 1.16
"Uni LR" 1.16
"Uni LV" 1.16
"Uni RTL" 1.112, 2.84
"Uni RTLH" 1.112, 2.25, 2.84
"Uni SH" 1.10
Universal fuel gauge lock 14.20
Universal tool 1.18, 1.51, 11.40
"Uni XD" 1.13
"Uni XH" 1.08
"Uni XHM" 1.08
"Uni XHT" 1.08
"Unofix" Refurbishment of one pipe heating 1.97
systems
V
Vacuum gauge 14.14
Valve inserts 1.104
Valve inserts "GHQ" 1.102
Valves "A" 1.62
Valves "ADV 9" 1.56
Valves "AQ" 1.42
Valves "AV 9" 1.50
2017 20.09
20
20.a Indices
Article number
General information EAN-Code
Art.-No. EAN/Code Page Art.-No. EAN/Code Page

1010558 4026755285321 1.94 1011682 4026755187502 1.09
1010559 4026755285338 1.94 1011682 4026755187502 3.84
1010568 4026755285345 1.94 1011685 4026755115185 1.13
1010569 4026755285352 1.94 1011688 4026755227765 1.09
1010599 4026755114348 1.93 1011698 4026755232035 1.18
1010988 4026755114645 1.55 1011766 4026755232042 1.17
1010989 4026755114652 1.55 1011775 4026755234237 1.17
1010990 4026755114669 1.55 1011801 4026755115246 1.18
1010991 4026755114676 1.55 1011811 4026755115253 1.18
1010992 4026755114683 1.55 1011865 4026755115277 1.18
1010993 4026755114690 1.55 1011865 4026755115277 12.27
1010994 4026755114706 1.55 1011866 4026755187519 1.18
1010995 4026755114713 1.55 1011866 4026755187519 12.27
1010996 4026755114720 1.55 1011875 4026755115284 1.18
1010997 4026755114737 1.55 1012065 4026755295030 1.10
1010998 4026755114744 1.55 1012066 4026755382181 1.10
1010999 4026755114751 1.137 1012069 4026755355222 1.10
1011265 4026755114850 1.11 1012080 4026755301236 1.10
1011300 4026755249118 1.08 1012081 4026755301243 1.10
1011360 4026755276916 1.08 1012082 4026755320039 1.10
1011364 4026755219838 1.08 1012085 4026755316001 1.10
1011365 4026755219845 1.08 1012165 4026755396461 1.11
1011374 4026755231830 1.13 1012166 4026755414233 1.11
1011375 4026755225068 1.13 1012175 4026755402018 1.14
1011380 4026755353433 1.17 1012176* 4026755440416 1.14
1011381 4026755353440 1.17 1012275 4026755115437 1.15
1011382 4026755353457 1.17 1012295 4026755115444 1.12
1011383 4026755353464 1.17 1012295 4026755115444 2.77
1011393 4026755248494 1.17 1012295 4026755115444 3.84
1011396 4026755254518 1.17 1012296 4026755187526 1.12
1011397 4026755254525 1.17 1012296 4026755187526 2.77
1011401 4026755114904 1.16 1012296 4026755187526 3.84
1011410 4026755318043 1.10 1012297 4026755187533 1.12
1011445 4026755228717 1.17 1012297 4026755187533 2.77
1011450 4026755208160 1.17 1012297 4026755187533 3.84
1011450 4026755208160 10.10 1012395 4026755187540 1.12
1011452 4026755232004 1.17 1012395 4026755187540 2.77
1011461 4026755296969 1.09 1012395 4026755187540 3.84
1011464 4026755182972 1.09 1012396 4026755187557 1.12
1011465 4026755114959 1.09 1012396 4026755187557 2.77
1011465 4026755114959 2.25 1012396 4026755187557 3.84
1011466 4026755114966 1.09 1012415 4026755415520 1.26
1011467 4026755114973 1.09 1012415 4026755415520 1.99
1011468 4026755175387 1.09 1012415 4026755415520 2.38
1011469 4026755175349 1.09 1012415 4026755415520 2.72
1011469 4026755175349 2.25 1012415 4026755415520 3.89
1011470 4026755296976 1.13 1012415 4026755415520 6.97
1011472 4026755208801 1.13 1012415 4026755415520 12.14
1011475 4026755114980 1.13 1012416 4026755415537 1.26
1011476 4026755114997 1.13 1012416 4026755415537 1.99
1011478 4026755175363 1.13 1012416 4026755415537 2.38
1011479 4026755175332 1.13 1012416 4026755415537 2.72
1011480 4026755175394 1.13 1012416 4026755415537 3.89
1011488 4026755227758 1.09 1012416 4026755415537 12.14
1011489 4026755419467 1.18 1012416 4026755415537 12.28
1011489 4026755419467 1.51 1012416 4026755415537 12.33
1011493 4026755232011 1.17 1012418 4026755420715 1.26
1011496 4026755207965 1.18 1012419 4026755420722 1.26
1011497 4026755342741 1.10 1012420 4026755418965 1.26
1011497 4026755342741 1.18 1012420 4026755418965 3.89
1011565 4026755229455 1.08 1012425 4026755415544 1.26
1011566 4026755231847 1.08 1012425 4026755415544 3.89
1011575 4026755229462 1.13 1012426 4026755415551 1.26
1011582 4026755231854 1.08 1012426 4026755415551 3.89
1011651 4026755115093 1.16 1012435 4026755415568 1.26
1011665 4026755115123 1.09 1012435 4026755415568 3.89
1011665 4026755115123 3.84 1012442 4026755415988 1.26
1011666 4026755187489 1.09 1012442 4026755415988 3.89
1011666 4026755187489 3.84 1012442 4026755415988 12.33
1011667 4026755187496 1.09 1012450 4026755422122 1.27
1011667 4026755187496 3.84 1012450 4026755422122 12.28
20
20.a Indices
Article number

1012452 4026755415995 1.26 1015934 4026755254198 1.120
1012452 4026755415995 3.89 1015943 4026755228359 1.121
1012452 4026755415995 6.97 1015944 4026755228366 1.121
1012455 4026755416008 1.26 1015993 4026755228373 1.120
1012455 4026755416008 3.89 1015994 4026755228380 1.120
1012459 4026755416015 1.26 1016166 4026755302547 1.121
1012459 4026755416015 3.89 1016168 4026755302554 1.121
1012461 4026755422139 1.27 1016175 4026755302561 1.120
1012462 4026755422146 1.27 1016177 4026755302578 1.120
1012462 4026755422146 3.89 1016194 4026755116878 1.93
1012565 4026755115567 1.18 1016196 4026755116885 1.93
1012565 4026755115567 2.77 1016241 4026755116915 1.123
1012575 4026755182965 1.18 1016242 4026755116922 1.123
1012703 4026755331776 3.90 1016254 4026755116939 1.94
1012705 4026755388961 1.28 1016256 4026755116946 1.94
1012705 4026755388961 2.73 1016284 4026755116977 1.94
1012705 4026755388961 3.90 1016286 4026755116984 1.94
1012705 4026755388961 6.96 1016291 4026755116991 1.122
1012706 4026755400991 1.28 1016292 4026755117004 1.122
1012706 4026755400991 2.73 1016295 4026755117028 1.94
1012706 4026755400991 3.90 1016297 4026755117042 1.94
1012708 4026755401196 1.28 1016304 4026755117059 1.123
1012708 4026755401196 2.73 1016341 4026755117097 1.123
1012708 4026755401196 3.90 1016342 4026755117103 1.123
1012708 4026755401196 6.96 1016362 4026755117141 1.124
1012709 4026755414127 1.28 1016363 4026755229677 1.124
1012709 4026755414127 2.73 1016372 4026755117158 1.124
1012709 4026755414127 3.90 1016391 4026755117202 1.122
1012709 4026755414127 6.96 1016392 4026755117219 1.122
1012710 4026755332285 1.28 1016394 4026755117226 1.93
1012710 4026755332285 3.90 1016452 4026755117257 1.124
1012710 4026755332285 10.10 1016462 4026755179569 1.124
1012711 4026755372182 1.28 1016463 4026755229684 1.124
1012711 4026755372182 3.90 1016567 4026755302585 1.121
1012715 4026755424720 1.28 1016569 4026755302592 1.121
1012715 4026755424720 3.90 1016575 4026755302608 1.120
1012716 4026755424737 1.28 1016577 4026755302615 1.120
1012716 4026755424737 3.90 1016662 4026755117370 1.125
1012717 4026755424744 1.28 1016671 4026755117387 1.125
1012717 4026755424744 3.90 1016671 4026755117387 11.38
1012735* 4026755449471 3.90 1016672 4026755117394 1.125
1012736* 4026755449488 3.90 1016672 4026755117394 11.38
1012890 4026755357851 1.27 1016673 4026755117400 1.125
1012953 4026755423365 1.27 1016673 4026755117400 11.38
1012953 4026755423365 3.89 1016674 4026755117417 1.125
1012953 4026755423365 12.33 1016674 4026755117417 11.38
1013066 4026755327588 1.11 1016675 4026755117424 1.125
1013076 4026755327595 1.14 1016675 4026755117424 11.38
1013161 4026755115611 1.90 1016684 4026755252804 1.91
1013162 4026755115628 1.90 1016813 4026755250343 1.91
1013164 4026755370867 1.90 1016823 4026755250350 1.91
1013361 4026755115642 1.86 1016824 4026755250367 1.91
1015500 4026755116694 1.16 1016840 4026755281866 1.142
1015645 4026755262537 11.17 1016841 4026755281873 1.142
1015651 4026755162479 1.124 1016842 4026755281880 1.142
1015651 4026755162479 11.17 1016843 4026755281897 1.142
1015711 4026755183931 1.121 1016844 4026755281903 1.142
1015781 4026755183924 1.120 1016845 4026755281910 1.142
1015803* 4026755443080 1.118 1016853 4026755117653 1.86
1015804* 4026755443097 1.118 1016853 4026755117653 1.90
1015805* 4026755443103 1.118 1016853 4026755117653 1.142
1015813 4026755228878 1.121 1016860 4026755117660 1.142
1015814 4026755228885 1.121 1016861 4026755117677 1.142
1015873* 4026755443110 1.118 1016862 4026755117684 1.142
1015874* 4026755443127 1.118 1016863 4026755117691 1.142
1015875* 4026755443134 1.118 1016864 4026755117707 1.142
1015883 4026755228892 1.120 1016865 4026755117714 1.142
1015884 4026755228908 1.120 1016870 4026755117721 1.142
1015896 4026755330649 1.120 1016873 4026755117738 1.142
1015896 4026755330649 1.121 1016874 4026755117745 1.142
1015933 4026755254181 1.120 1016876 4026755117769 1.142
20
20.a Indices
Article number

1016877 4026755117776 1.142 1019498 4026755356618 1.95
1016879 4026755117790 1.142 1019903 4026755118919 1.137
1016882 4026755117820 1.142 1019904 4026755118926 1.137
1016883 4026755117837 1.142 1019906 4026755118933 1.137
1016885 4026755117844 1.142 1019908 4026755118940 1.137
1016951 4026755117851 1.86
1016951 4026755117851 1.90 1022612 4026755383942 2.21
1016953 4026755117868 1.86 1022631 4026755250374 2.22
1016953 4026755117868 1.90 1022632 4026755250381 2.20
1016954 4026755117875 1.86 1022633 4026755250398 2.22
1016954 4026755117875 1.90 1022634 4026755299168 2.22
1017056 4026755117943 1.94 1022635 4026755207989 2.23
1017057 4026755117950 1.110 1022636 4026755207996 2.20
1017060 4026755117967 1.110 1022637 4026755208009 2.23
1017069 4026755118056 1.110 1022639 4026755277838 2.24
1017351 4026755118162 1.110 1022641 4026755250404 2.22
1017501 4026755232059 1.109 1022643 4026755250428 2.22
1018080 4026755118247 1.104 1022644 4026755299175 2.22
1018082 4026755298949 1.104 1022646 4026755208023 2.20
1018083 4026755118261 1.105 1022650 4026755208047 2.24
1018084 4026755333510 1.106 1022652 4026755330465 2.24
1018086 4026755171846 1.106 1022653 4026755394139 2.13
1018090 4026755118278 1.104 1022653 4026755394139 2.24
1018094 4026755333527 1.106 1022654 4026755401202 2.14
1018096 4026755182996 1.106 1022655 4026755313000 2.26
1018097 4026755236934 1.104 1022655 4026755313000 2.43
1018098 4026755308037 1.105 1022662 4026755318050 2.10
1018099 4026755333534 1.106 1022662 4026755318050 2.20
1018280 4026755439076 1.104 1022663 4026755324457 2.20
1018282 4026755439083 1.104 1022668 4026755330618 2.12
1018283 4026755438826 1.105 1022669 4026755330625 2.12
1018561 4026755216493 1.09 1022673 4026755360813 2.22
1019003 4026755118469 1.136 1022676 4026755401516 2.14
1019004 4026755118476 1.136 1022679 4026755299625 2.24
1019006 4026755118483 1.136 1022684 4026755423372 2.18
1019052 4026755118490 1.136 1022686 4026755423389 2.18
1019080 4026755424362 1.102 1022687 4026755250435 2.24
1019082 4026755424379 1.102 1022688 4026755224627 2.24
1019083 4026755424386 1.102 1022689 4026755224634 2.24
1019084* 1.103 1022690 4026755250442 2.24
1019086* 1.103 1022691 4026755202021 2.24
1019099* 1.103 1022692 4026755202038 2.24
1019103 4026755118506 1.136 1022693 4026755208054 2.24
1019104 4026755118513 1.136 1022694 4026755208061 2.24
1019106 4026755118520 1.136 1022697 4026755383959 2.24
1019194 4026755118551 1.93 1022698 4026755221954 1.18
1019196 4026755118568 1.93 1022698 4026755221954 2.26
1019204 4026755356595 1.136 1022699 4026755221961 1.112
1019251 4026755118599 1.136 1022699 4026755221961 2.26
1019252 4026755118605 1.136 1024363 4026755187649 1.112
1019253 4026755118612 1.136 1024363 4026755187649 2.84
1019254 4026755118629 1.136 1024364 4026755187656 1.112
1019303 4026755118636 1.136 1024364 4026755187656 2.84
1019304 4026755118643 1.136 1024463 4026755187663 1.112
1019304 4026755118643 2.77 1024463 4026755187663 2.84
1019306 4026755118650 1.136 1024464 4026755187670 1.112
1019308 4026755118667 1.136 1024464 4026755187670 2.84
1019351 4026755118674 1.136 1026970 4026755295054 2.26
1019352 4026755118681 1.136 1026981 4026755187687 1.112
1019353 4026755118698 1.136 1026981 4026755187687 2.26
1019362 4026755118704 1.136 1026981 4026755187687 2.84
1019365 4026755118728 1.136 1026981 4026755187687 3.19
1019372 4026755366624 1.136 1026986 4026755232066 1.112
1019374 4026755118742 1.93 1026986 4026755232066 2.26
1019376 4026755118759 1.93 1026986 4026755232066 2.84
1019384 4026755118773 1.93 1027053 4026755381542 2.11
1019386 4026755118780 1.93 1027054 4026755381559 2.11
1019394 4026755118797 1.93 1027055 4026755381566 2.11
1019396 4026755118803 1.93 1027056 4026755381573 2.11
1019451 4026755118827 1.136 1027100 4026755119350 1.112
1019497 4026755356601 1.95 1027100 4026755119350 2.84
20
20.a Indices
Article number

1027150 4026755207200 3.45 1028155 4026755296006 1.140
1027151 4026755207217 1.140 1028156 4026755296013 1.140
1027151 4026755207217 3.45 1028161 4026755119862 1.125
1027152 4026755207224 1.140 1028252 4026755248876 1.125
1027152 4026755207224 3.45 1028253 4026755248883 1.125
1027153 4026755207231 3.45 1028263 4026755119886 1.125
1027154 4026755207248 3.45 1028263 4026755119886 2.52
1027155 4026755207255 3.45 1028364 4026755187724 1.113
1027156 4026755207262 3.45 1028364 4026755187724 2.84
1027157 4026755207279 1.140 1028464 4026755187748 1.113
1027157 4026755207279 3.45 1028464 4026755187748 2.84
1027158 4026755207286 1.140 1028750 4026755119893 1.86
1027158 4026755207286 3.45 1028851 4026755119916 1.86
1027165 4026755187700 1.112 1029651 4026755119923 1.143
1027165 4026755187700 2.25 1029651 4026755119923 14.43
1027165 4026755187700 2.84 1029652 4026755119930 1.143
1027172 4026755217209 1.112 1029652 4026755119930 9.32
1027172 4026755217209 2.25 1029652 4026755119930 14.43
1027172 4026755217209 2.84 1029653 4026755119947 1.143
1027440 4026755281927 1.141 1029654 4026755119954 1.143
1027441 4026755281934 1.141 1029654 4026755119954 9.32
1027442 4026755281941 1.141 1029654 4026755119954 14.43
1027443 4026755281958 1.141 1029655 4026755119961 1.143
1027444 4026755281965 1.141 1029655 4026755119961 9.32
1027445 4026755281972 1.141 1029656 4026755119978 1.143
1027472 4026755207293 1.141 1029656 4026755119978 9.32
1027473 4026755207309 1.141 1029656 4026755119978 14.43
1027474 4026755207316 1.141 1029657 4026755119985 1.143
1027475 4026755207323 1.141 1029657 4026755119985 9.32
1027476 4026755207330 1.141
1027477 4026755207347 1.141 1032003 4026755120141 6.127
1027562 4026755245400 1.130 1032003 4026755120141 9.67
1027564 4026755245417 1.130 1032004 4026755120158 6.127
1027566 4026755245424 1.130 1032004 4026755120158 9.67
1027568 4026755245431 1.130 1032006 4026755120165 6.127
1027662 4026755245448 1.130 1032006 4026755120165 9.67
1027662 4026755245448 3.81 1032008 4026755120172 6.127
1027664 4026755192827 1.130 1032008 4026755120172 9.67
1027664 4026755192827 3.81 1032403 4026755120226 6.126
1027666 4026755192834 1.130 1032403 4026755120226 8.63
1027666 4026755192834 3.81 1032404 4026755120233 6.126
1027668 4026755192841 1.130 1033091 4026755120318 6.126
1027668 4026755192841 3.81 1033152 4026755400311 6.124
1027752 4026755119695 1.141 1033152 4026755400311 8.63
1027755 4026755119701 1.141 1033308 4026755120387 6.124
1027755 4026755119701 2.51 1033313 4026755199581 2.76
1027757 4026755119718 1.141 1033313 4026755199581 6.124
1027757 4026755119718 2.51 1033314 4026755199598 2.60
1027759 4026755119725 1.141 1033314 4026755199598 2.88
1027759 4026755119725 2.51 1033314 4026755199598 6.124
1027761 4026755119732 1.141 1033315 4026755199833 6.124
1027763 4026755119749 1.141 1033316 4026755199840 6.124
1027763 4026755119749 2.51 1033351 4026755205718 6.124
1027767 4026755119756 1.141 1033352 4026755199864 6.124
1027768 4026755119763 1.141 1033354 4026755199871 6.124
1027772 4026755119770 1.141 1033372 4026755394764 6.125
1027772 4026755119770 2.43 1033372 4026755394764 9.67
1027775 4026755119787 1.141 1033413 4026755208283 6.124
1027775 4026755119787 2.51 1033414 4026755208290 6.124
1027777 4026755119794 1.141 1033672 4026755394771 6.125
1027777 4026755119794 2.51 1033672 4026755394771 9.67
1027779 4026755119800 1.141 1033814 4026755199888 6.124
1027779 4026755119800 2.51 1033852 4026755199895 6.124
1027781 4026755119817 1.141 1033914 4026755199901 6.124
1027783 4026755119824 1.141 1034003 4026755120547 6.127
1027783 4026755119824 2.51 1034003 4026755120547 9.68
1027787 4026755207354 1.141 1034008 4026755120578 1.137
1027788 4026755207361 1.141 1034008 4026755120578 6.125
1028152 4026755295979 1.140 1034008 4026755120578 6.127
1028153 4026755295986 1.140 1034008 4026755120578 9.68
1028154 4026755295993 1.140 1034052 4026755317459 1.137
2017 20.13
20
20.a Indices
Article number

1034052 4026755317459 6.125 1045055 4026755121421 5.15
1034052 4026755317459 6.127 1045056 4026755121438 5.15
1034052 4026755317459 9.68 1045057 4026755121445 5.15
1034053 4026755317466 1.137 1045058 4026755121452 5.15
1034053 4026755317466 6.125 1045149 4026755250961 5.15
1034053 4026755317466 6.127 1045150 4026755121469 5.15
1034053 4026755317466 9.68 1045151 4026755121476 5.15
1034091 4026755120585 6.127 1045152 4026755121483 5.15
1034092 4026755120592 6.125 1045153 4026755121490 5.15
1034092 4026755120592 6.127 1045154 4026755121506 5.15
1034093 4026755120608 6.125 1045155 4026755121513 5.15
1034093 4026755120608 6.127 1045156 4026755121520 5.15
1034094 4026755120615 6.125 1045157 4026755121537 5.15
1034094 4026755120615 6.127 1045158 4026755121544 5.15
1034315 4026755324785 6.124 1046250 4026755121728 5.23
1034504 4026755120639 6.127 1046251 4026755121735 5.23
1034504 4026755120639 9.68 1046252 4026755121742 5.23
1034506 4026755120646 6.127 1046253 4026755121759 5.23
1034506 4026755120646 9.68 1046254 4026755121766 5.23
1034508 4026755120653 6.127 1046255 4026755121773 5.23
1034508 4026755120653 9.68 1046256 4026755121780 5.23
1034551 4026755120660 6.127 1046350 4026755121803 5.23
1034551 4026755120660 9.68 1046351 4026755121810 5.23
1034552 4026755120677 6.125 1046352 4026755121827 5.23
1034553 4026755317473 6.125 1046353 4026755121834 5.23
1034554 4026755317480 6.125 1046354 4026755121841 5.23
1034562 4026755317497 6.125 1046355 4026755121858 5.23
1035004 4026755120707 6.127 1046356 4026755121865 5.23
1035004 4026755120707 9.68 1046950 4026755122183 5.23
1035006 4026755120714 6.127 1046951 4026755122190 5.23
1035006 4026755120714 9.68 1046952 4026755122206 5.23
1036154 4026755275261 6.125 1046953 4026755122213 5.23
1036156 4026755275278 6.125 1046954 4026755122220 5.23
1036158 4026755275285 6.125 1046955 4026755122237 5.23
1038002 4026755120806 6.126 1046956 4026755122244 5.23
1038003 4026755120813 6.126 1046957 4026755122251 5.23
1046958 4026755122268 5.23
1040003 4026755120882 5.14 1047050 4026755122336 5.23
1040004 4026755120899 5.14 1047051 4026755122343 5.23
1040006 4026755120905 5.14 1047052 4026755122350 5.23
1040008 4026755120912 5.14 1047053 4026755122367 5.23
1040010 4026755120929 5.14 1047054 4026755122374 5.23
1040012 4026755120936 5.14 1047055 4026755122381 5.23
1040016 4026755120943 5.14 1047056 4026755122398 5.23
1040020 4026755120950 5.14 1047057 4026755122404 5.23
1040024 4026755120967 5.14 1047058 4026755122411 5.23
1040032 4026755120974 5.14 1048250 4026755123241 5.22
1043003 4026755121209 5.14 1048251 4026755123258 5.22
1043003 4026755121209 9.67 1048252 4026755123265 5.22
1043004 4026755121216 5.14 1048253 4026755123272 5.22
1043004 4026755121216 9.67 1048254 4026755123289 5.22
1043006 4026755121223 5.14 1048255 4026755123296 5.22
1043006 4026755121223 9.67 1048256 4026755123302 5.22
1043008 4026755121230 5.14 1048291 4026755339802 5.24
1043008 4026755121230 9.67 1048292 4026755339819 5.24
1043010 4026755121247 5.14 1048293 4026755339826 5.24
1043010 4026755121247 9.67 1048350 4026755123326 5.22
1043012 4026755121254 5.14 1048351 4026755123333 5.22
1043012 4026755121254 9.67 1048352 4026755123340 5.22
1043016 4026755121261 5.14 1048353 4026755123357 5.22
1043016 4026755121261 9.67 1048354 4026755123364 5.22
1043020 4026755121278 5.14 1048355 4026755123371 5.22
1043020 4026755121278 9.67 1048356 4026755123388 5.22
1043024 4026755121285 5.14 1048950 4026755123647 5.22
1043024 4026755121285 9.67 1048951 4026755123654 5.22
1045049 4026755250954 5.15 1048952 4026755123661 5.22
1045050 4026755121377 5.15 1048953 4026755123678 5.22
1045051 4026755121384 5.15 1048954 4026755123685 5.22
1045052 4026755121391 5.15 1048955 4026755123692 5.22
1045053 4026755121407 5.15 1048956 4026755123708 5.22
1045054 4026755121414 5.15 1048957 4026755123715 5.22
20
20.a Indices
Article number

1048958 4026755123722 5.22 1060086 4026755167924 8.20
1048959 4026755123739 5.22 1060103 4026755124934 3.26
1048960 4026755123746 5.22 1060104 4026755124941 3.26
1048991 4026755346398 5.24 1060106 4026755124958 3.26
1048992 4026755346404 5.24 1060108 4026755124965 3.26
1048993 4026755346411 5.24 1060110 4026755124972 3.26
1049050 4026755123760 5.22 1060112 4026755124989 3.26
1049051 4026755123777 5.22 1060116 4026755124996 3.26
1049052 4026755123784 5.22 1060120 4026755125009 3.26
1049053 4026755123791 5.22 1060151 4026755344264 3.28
1049054 4026755123807 5.22 1060152 4026755344271 3.28
1049055 4026755123814 5.22 1060154 4026755344288 3.28
1049056 4026755123821 5.22 1060156 4026755344295 3.28
1049057 4026755123838 5.22 1060158 4026755344301 3.28
1049058 4026755123845 5.22 1060160 4026755344318 3.28
1049059 4026755123852 5.22 1060162 4026755344325 3.28
1049060 4026755123869 5.22 1060180 4026755273809 3.44
1049950 4026755321166 5.24 1060180 4026755273809 8.33
1049953 4026755321296 5.24 1060191 4026755125023 3.42
1049956 4026755321173 5.24 1060203 4026755125061 3.26
1049957 4026755321302 5.24 1060204 4026755125078 3.26
1049959 4026755321180 5.24 1060206 4026755125085 3.26
1049960 4026755321197 5.24 1060208 4026755125092 3.26
1060210 4026755125108 3.26
1050203 4026755335491 5.18 1060212 4026755125115 3.26
1050204 4026755335507 5.18 1060216 4026755125122 3.26
1050206 4026755335514 5.18 1060281 4026755179149 3.42
1050208 4026755335521 5.18 1060282 4026755335378 3.42
1050210 4026755335538 5.18 1060291 4026755125146 3.42
1050212 4026755335545 5.18 1060295 4026755125160 3.42
1050216 4026755335552 5.18 1060296 4026755231113 3.42
1050303 4026755335569 5.18 1060297 4026755125177 3.17
1050304 4026755335576 5.18 1060297 4026755125177 3.98
1050306 4026755335583 5.18 1060298 4026755192230 3.42
1050308 4026755335590 5.18 1060298 4026755192230 3.62
1050310 4026755335606 5.18 1060298 4026755192230 3.98
1050312 4026755335613 5.18 1060299 4026755324471 3.42
1050316 4026755335620 5.18 1060303 4026755191622 3.26
1052002 4026755124538 5.18 1060304 4026755191639 3.26
1052003 4026755124545 5.18 1060306 4026755191646 3.26
1052004 4026755124552 5.18 1060308 4026755191653 3.26
1052006 4026755124569 5.18 1060310 4026755191660 3.26
1052008 4026755124576 5.18 1060312 4026755191677 3.26
1052010 4026755124583 5.18 1060316 4026755191684 3.26
1052012 4026755124590 5.18 1060381 4026755179156 3.42
1052016 4026755124606 5.18 1060391 4026755125184 3.42
1052020 4026755124613 5.18 1060404 4026755348026 3.32
1052102 4026755335637 5.18 1060406 4026755348033 3.32
1052103 4026755335644 5.18 1060408 4026755348040 3.32
1052104 4026755335651 5.18 1060410 4026755348057 3.32
1052106 4026755335668 5.18 1060412 4026755348064 3.32
1052108 4026755335675 5.18 1060416 4026755348071 3.32
1052110 4026755335682 5.18 1060434 4026755372038 3.32
1052112 4026755335699 5.18 1060451 4026755375343 3.32
1052116 4026755335705 5.18 1060452 4026755375350 3.32
1055004 4026755372403 6.123 1060454 4026755375367 3.32
1055004 4026755372403 8.68 1060456 4026755375374 3.32
1055095 4026755371741 8.68 1060458 4026755375381 3.32
1055096 4026755371758 8.68 1060460 4026755375398 3.32
1060462 4026755375404 3.32
1060081 4026755167870 3.44 1060464 4026755372045 3.32
1060081 4026755167870 8.20 1060481 4026755356625 3.44
1060082 4026755167887 3.44 1060482 4026755356632 3.44
1060082 4026755167887 8.20 1060483 4026755356649 3.44
1060083 4026755167894 3.44 1060484 4026755356656 3.44
1060083 4026755167894 8.20 1060485 4026755356663 3.44
1060084 4026755167900 3.44 1060486 4026755356670 3.44
1060084 4026755167900 8.20 1060503 4026755125207 3.26
1060085 4026755167917 3.44 1060504 4026755125214 3.26
1060085 4026755167917 8.20 1060506 4026755125221 3.26
1060086 4026755167924 3.44 1060508 4026755125238 3.26
20
20.a Indices
Article number

1060510 4026755125245 3.26 1061096 4026755125511 3.45
1060512 4026755125252 3.26 1061097 4026755125528 3.45
1060516 4026755125269 3.26 1061098 4026755125535 3.45
1060564 4026755395747 3.72 1061392 4026755400205 1.95
1060566 4026755395754 3.72 1061392 4026755400205 3.45
1060591 4026755125276 3.45 1061393 4026755400212 1.95
1060592 4026755125283 1.54 1061393 4026755400212 3.45
1060592 4026755125283 1.95 1061394 4026755125627 3.45
1060592 4026755125283 3.45 1061395 4026755125634 3.45
1060593 4026755125290 1.95 1061491 4026755125641 3.45
1060593 4026755125290 3.45 1061492 4026755125658 1.95
1060594 4026755125306 3.45 1061492 4026755125658 3.45
1060595 4026755125313 3.45 1061493 4026755125665 1.95
1060596 4026755125320 3.45 1061493 4026755125665 3.45
1060597 4026755125337 3.45 1061494 4026755125672 3.45
1060604 4026755216332 3.46 1061495 4026755125689 3.45
1060606 4026755216349 3.46 1061496 4026755125696 3.45
1060608 4026755216356 3.46 1061497 4026755169065 3.45
1060610 4026755216363 3.46 1061504 4026755125702 3.36
1060612 4026755216370 3.46 1061506 4026755125719 3.36
1060616 4026755216387 3.46 1061508 4026755125726 3.36
1060634 4026755272666 3.46 1061510 4026755125733 3.36
1060644 4026755125344 3.46 1061512 4026755125740 3.36
1060651 4026755375411 3.32 1061592 4026755125757 3.43
1060751 4026755125351 3.46 1061593 4026755125764 3.43
1060752 4026755125368 3.46 1061594 4026755125771 3.43
1060753 4026755125375 3.46 1061595 4026755125788 3.43
1060754 4026755125382 3.46 1061596 4026755125795 3.43
1060755 4026755125399 3.46 1061604 4026755125801 3.36
1060756 4026755125405 3.46 1061606 4026755125818 3.36
1060757 4026755125412 3.46 1061608 4026755125825 3.36
1060758 4026755125429 3.46 1061610 4026755125832 3.36
1060759 4026755260052 3.46 1061612 4026755125849 3.36
1060760 4026755248043 3.46 1061651 4026755375428 3.32
1060761 4026755260069 3.46 1061704 4026755238235 3.12
1060762 4026755248050 3.46 1061706 4026755238242 3.12
1060763 4026755270662 3.46 1061708 4026755238259 3.12
1060764 4026755260076 3.46 1061710 4026755250473 3.12
1060765 4026755274257 3.46 1061712 4026755250480 3.12
1060766 4026755274264 3.46 1061716 4026755364057 3.12
1060767 4026755298413 3.46 1061751 4026755343687 3.12
1060771 4026755258516 3.46 1061752 4026755343694 3.12
1060772 4026755258523 3.46 1061754 4026755343700 3.12
1060773 4026755258530 3.46 1061756 4026755343717 3.12
1060774 4026755258547 3.46 1061758 4026755343724 3.12
1060775 4026755258554 3.46 1061760 4026755343731 3.12
1060776 4026755258561 3.46 1061771 4026755250497 3.16
1060777 4026755258578 3.46 1061772 4026755250503 3.16
1060778 4026755258585 3.46 1061773 4026755250510 3.16
1060853 4026755275735 3.46 1061774 4026755250527 3.16
1060854 4026755275742 3.46 1061775 4026755250534 3.16
1060855 4026755125436 3.46 1061781 4026755250541 3.16
1060856 4026755275940 3.46 1061782 4026755250558 3.16
1060857 4026755275957 3.46 1061783 4026755250565 3.16
1060858 4026755125443 3.46 1061784 4026755250572 3.16
1060859 4026755275964 3.46 1061785 4026755250589 3.16
1060860 4026755275971 3.46 1061790 4026755263619 3.20
1060861 4026755275988 3.46 1061791 4026755250596 3.17
1060862 4026755275995 3.46 1061791 4026755250596 3.62
1060863 4026755276008 3.46 1061791 4026755250596 3.98
1060906 4026755381672 3.50 1061792 4026755250602 3.17
1060906 4026755381672 3.74 1061792 4026755250602 8.30
1060908 4026755381689 3.50 1061793 4026755250619 3.17
1060908 4026755381689 3.74 1061794 4026755250626 3.17
1060910 4026755381696 3.50 1061795 4026755250633 3.17
1060925 4026755381412 3.50 1061796 4026755250640 3.17
1061091 4026755282108 3.45 1061797 4026755262209 3.17
1061092 4026755125474 3.45 1061798 4026755263626 3.20
1061093 4026755125481 3.45 1061799 4026755250657 3.17
1061094 4026755125498 3.45 1061799 4026755250657 3.62
1061095 4026755125504 3.45 1061799 4026755250657 3.98
20.16 2017
20
20.a Indices
Article number

1061804 4026755238266 3.12 1062584 4026755126020 3.44
1061806 4026755238273 3.12 1062585 4026755126037 3.44
1061808 4026755238280 3.12 1062586 4026755126044 3.44
1061810 4026755250664 3.12 1062587 4026755126051 3.44
1061812 4026755250671 3.12 1062588 4026755126068 3.44
1061816 4026755364064 3.12 1062589 4026755126075 3.44
1061854 4026755395761 3.74 1062590 4026755126082 3.44
1061856 4026755306392 2.65 1062646 4026755173154 3.29
1061856 4026755306392 3.74 1062647 4026755173178 3.29
1061904 4026755395778 3.73 1062648 4026755173215 3.29
1061906 4026755395785 3.73 1062649 4026755126105 3.29
1061934 4026755395792 3.73 1062650 4026755126112 3.29
1061964 4026755395808 3.73 1062651 4026755126129 3.29
1062004 4026755250688 3.15 1062652 4026755126136 3.29
1062006 4026755250695 3.15 1062653 4026755126143 3.29
1062008 4026755250701 3.15 1062654 4026755126150 3.29
1062010 4026755250718 3.15 1062655 4026755126167 3.29
1062012 4026755250725 3.15 1062656 4026755126174 3.29
1062016 4026755364071 3.15 1062657 4026755180190 3.29
1062051 4026755370591 3.34 1062658 4026755180206 3.29
1062052 4026755370607 3.34 1062659 4026755324570 3.29
1062053 4026755370614 3.34 1062660 4026755324587 3.29
1062054 4026755370621 3.34 1062676 4026755329261 3.30
1062055 4026755370638 3.34 1062677 4026755329278 3.30
1062082 4026755250732 3.17 1062678 4026755329285 3.30
1062085 4026755250749 3.17 1062679 4026755329292 3.30
1062090 4026755281231 3.17 1062680 4026755329308 3.30
1062092 4026755272000 3.17 1062681 4026755329315 3.30
1062095 4026755283907 3.17 1062682 4026755329322 3.30
1062095 4026755283907 3.43 1062683 4026755329339 3.30
1062097 4026755423723 3.17 1062684 4026755329346 3.30
1062097 4026755423723 3.43 1062685 4026755329353 3.30
1062104 4026755250756 3.15 1062686 4026755329360 3.30
1062106 4026755250763 3.15 1062946 4026755277531 3.29
1062108 4026755250770 3.15 1062947 4026755275759 3.29
1062110 4026755250787 3.15 1062948 4026755275766 3.29
1062112 4026755250794 3.15 1062949 4026755275773 3.29
1062116 4026755364088 3.15 1062950 4026755275780 3.29
1062156 4026755306408 2.65 1062951 4026755179415 3.29
1062204 4026755263664 3.15 1062952 4026755179422 3.29
1062206 4026755263671 3.15 1062953 4026755179439 3.29
1062208 4026755263688 3.15 1062954 4026755179446 3.29
1062210 4026755263695 3.15 1062955 4026755179453 3.29
1062212 4026755263701 3.15 1062956 4026755179460 3.29
1062216 4026755364095 3.15 1062957 4026755179477 3.29
1062282 4026755262216 3.17 1062958 4026755179484 3.29
1062285 4026755262223 3.17 1062959 4026755333138 3.29
1062304 4026755263718 3.15 1062960 4026755430363 3.29
1062306 4026755263725 3.15 1063051 4026755225099 3.31
1062308 4026755263732 3.15 1063052 4026755225105 3.31
1062310 4026755263749 3.15 1063053 4026755225112 3.31
1062312 4026755263756 3.15 1063054 4026755225129 3.31
1062316 4026755364101 3.15 1063055 4026755225136 3.31
1062350 4026755253832 3.30 1063056 4026755225143 3.31
1062351 4026755251623 3.30 1063057 4026755225150 3.31
1062352 4026755251630 3.30 1063058 4026755225167 3.31
1062353 4026755251647 3.30 1063964 4026755395815 3.74
1062354 4026755251654 3.30 1063966 4026755395822 3.74
1062355 4026755251661 3.30 1064051 4026755231861 3.31
1062356 4026755252422 3.30 1064054 4026755231878 3.31
1062451 4026755241112 3.31 1064055 4026755231885 3.31
1062452 4026755241129 3.31 1064264 4026755395839 3.74
1062453 4026755241136 3.31 1064266 4026755395846 3.74
1062454 4026755241143 3.31 1064267 4026755395853 3.74
1062455 4026755241150 3.31 1064504 4026755127133 3.37
1062456 4026755241167 3.31 1064506 4026755127140 3.37
1062457 4026755241174 3.31 1064508 4026755127157 3.37
1062458 4026755241181 3.31 1064510 4026755127164 3.37
1062581 4026755125993 3.44 1064512 4026755127171 3.37
1062582 4026755126006 3.44 1064516 4026755216912 3.37
1062583 4026755126013 3.44 1064592 4026755127188 3.43
2017 20.17
20
20.a Indices
Article number

1064593 4026755127195 3.43 1066008 4026755127546 5.19
1064594 4026755127201 3.43 1066010 4026755127553 5.19
1064595 4026755127218 3.43 1066151 4026755127607 5.19
1064596 4026755127225 3.43 1066504 4026755127614 5.11
1064597 4026755304251 3.43 1066506 4026755127621 5.11
1064604 4026755127232 3.37 1066508 4026755127638 5.11
1064606 4026755127249 3.37 1066510 4026755127645 5.11
1064608 4026755127256 3.37 1066604 4026755127652 5.11
1064610 4026755127263 3.37 1066606 4026755127669 5.11
1064612 4026755127270 3.37 1066608 4026755127676 5.11
1064616 4026755292176 3.37 1066610 4026755127683 5.11
1064651 4026755305432 3.38 1066904 4026755127690 5.11
1064652 4026755305449 3.38 1066904 4026755127690 5.19
1064653 4026755305456 3.38 1066906 4026755127706 5.11
1064654 4026755332124 3.38 1066906 4026755127706 5.19
1064655 4026755332131 3.38 1066908 4026755127713 5.11
1064704 4026755324594 3.37 1066908 4026755127713 5.19
1064706 4026755324600 3.37 1066910 4026755127720 5.11
1064708 4026755324617 3.37 1066910 4026755127720 5.19
1064710 4026755324624 3.37 1067004 4026755127775 5.19
1064712 4026755324631 3.37 1067065 4026755264869 3.20
1064716 4026755305586 3.37 1067066 4026755264876 3.20
1064751 4026755246018 3.38 1067067 4026755264883 3.20
1064752 4026755246025 3.38 1067068 4026755264890 3.20
1064753 4026755301076 3.38 1067069 4026755264906 3.20
1064754 4026755333145 3.38 1067085 4026755264913 3.20
1064755 4026755333152 3.38 1067304 4026755250800 3.13
1064756 4026755377453 3.38 1067306 4026755250817 3.13
1064792 4026755340105 3.43 1067308 4026755250824 3.13
1064793 4026755340112 3.43 1067310 4026755250831 3.13
1064794 4026755340129 3.43 1067312 4026755250848 3.13
1064795 4026755340136 3.43 1067316 4026755364118 3.13
1064796 4026755340143 3.43 1067351 4026755343748 3.13
1064797 4026755340488 3.43 1067352 4026755343755 3.13
1064804 4026755333046 3.37 1067354 4026755343762 3.13
1064806 4026755333053 3.37 1067356 4026755343779 3.13
1064808 4026755333060 3.37 1067358 4026755343786 3.13
1064810 4026755333077 3.37 1067360 4026755343793 3.13
1064812 4026755333084 3.37 1067404 4026755250879 3.13
1064816 4026755305593 3.37 1067406 4026755250886 3.13
1064951 4026755407952 3.38 1067408 4026755250893 3.13
1064952 4026755407969 3.38 1067410 4026755250909 3.13
1064953 4026755407976 3.38 1067412 4026755250916 3.13
1064954 4026755407983 3.38 1067416 4026755364125 3.13
1064955 4026755407990 3.38 1067503 4026755127942 3.34
1065004 4026755127287 5.19 1067504 4026755127959 3.34
1065006 4026755127294 5.19 1067506 4026755127966 3.34
1065008 4026755127300 5.19 1067508 4026755127973 3.34
1065010 4026755127317 5.19 1067510 4026755127980 3.34
1065504 4026755127409 5.11 1067512 4026755127997 3.34
1065506 4026755127416 5.11 1067516 4026755128000 3.34
1065508 4026755127423 5.11 1067520 4026755330755 3.34
1065510 4026755127430 5.11 1067551 4026755344332 3.34
1065604 4026755127447 5.11 1067552 4026755344349 3.34
1065606 4026755127454 5.11 1067554 4026755344356 3.34
1065608 4026755127461 5.11 1067556 4026755344363 3.34
1065610 4026755127478 5.11 1067558 4026755344370 3.34
1065851 4026755390520 3.33 1067560 4026755344387 3.34
1065852 4026755390537 3.33 1067562 4026755344394 3.34
1065853 4026755390544 3.33 1067603 4026755128017 3.34
1065854 4026755390551 3.33 1067604 4026755128024 3.34
1065855 4026755390568 3.33 1067606 4026755128031 3.34
1065856 4026755390575 3.33 1067608 4026755128048 3.34
1065857 4026755390582 3.33 1067610 4026755128055 3.34
1065858 4026755390599 3.33 1067612 4026755128062 3.34
1065904 4026755127485 5.19 1067616 4026755128079 3.34
1065906 4026755127492 5.19 1068004 4026755128086 5.34
1065908 4026755127508 5.19 1068006 4026755128093 5.34
1065910 4026755127515 5.19 1068008 4026755128109 5.34
1066004 4026755127522 5.19 1068010 4026755128116 5.34
1066006 4026755127539 5.19 1068364 4026755260939 3.14
20.18 2017
20
20.a Indices
Article number

1068366 4026755260946 3.14 1072008 4026755128529 5.26
1068368 4026755260953 3.14 1072010 4026755128536 5.26
1068464 4026755260960 3.14 1072012 4026755128543 5.26
1068466 4026755260977 3.14 1072016 4026755128550 5.26
1068468 4026755260991 3.14 1072103 4026755335729 5.26
1068564 4026755264920 3.14 1072104 4026755335736 5.26
1068566 4026755264937 3.14 1072106 4026755335743 5.26
1068568 4026755264944 3.14 1072108 4026755335750 5.26
1068570 4026755264951 3.14 1072110 4026755335767 5.26
1068572 4026755264968 3.14 1072112 4026755335774 5.26
1068585 4026755270457 3.18 1072116 4026755335781 5.26
1068664 4026755264975 3.14 1072549 4026755335132 5.27
1068666 4026755264982 3.14 1072550 4026755128574 5.27
1068667 4026755264999 3.14 1072551 4026755128581 5.27
1068668 4026755265002 3.14 1072552 4026755128598 5.27
1068670 4026755265019 3.14 1072553 4026755128604 5.27
1068672 4026755265026 3.14 1072554 4026755128611 5.27
1068804 4026755128147 5.34 1072555 4026755128628 5.27
1068806 4026755128154 5.34 1072556 4026755128635 5.27
1068808 4026755128161 5.34 1072557 4026755128642 5.27
1068810 4026755128178 5.34 1072558 4026755128659 5.27
1069003 4026755163872 3.43 1072559 4026755310368 5.27
1069004 4026755163889 3.43 1072560 4026755310375 5.27
1069006 4026755163896 3.43 1072561 4026755310382 5.27
1069008 4026755163902 3.43 1072650 4026755357585 5.27
1069010 4026755163919 3.43 1072651 4026755357592 5.27
1069012 4026755163926 3.43 1072652 4026755357608 5.27
1069016 4026755163933 3.43 1072653 4026755357615 5.27
1069177 4026755234589 3.95 1072654 4026755357622 5.27
1069178 4026755280340 3.95 1072655 4026755357639 5.27
1069179 4026755248920 3.95 1072656 4026755357646 5.27
1069180 4026755325409 3.97 1072657 4026755357653 5.27
1069186 4026755273984 3.95 1072658 4026755357660 5.27
1069197 4026755329919 3.95 1072659 4026755357677 5.27
1069199 4026755202779 3.42 1072660 4026755357684 5.27
1069199 4026755202779 3.62 1072661 4026755357691 5.27
1069199 4026755202779 3.98 1072662 4026755357707 5.27
1069277 4026755333572 3.96 1072663 4026755357714 5.27
1069278 4026755419603 3.94 1073049 4026755251357 5.27
1069279 4026755439007 3.94 1073050 4026755128666 5.27
1069292 4026755402551 5.19 1073051 4026755128673 5.27
1069293 4026755402568 5.19 1073052 4026755128680 5.27
1069294 4026755402575 5.19 1073053 4026755128697 5.27
1069295 4026755402582 5.19 1073054 4026755128703 5.27
1069299 4026755419610 3.95 1073055 4026755128710 5.27
1069650 4026755355505 3.44 1073056 4026755128727 5.27
1069650 4026755355505 8.33 1073057 4026755128734 5.27
1069651 4026755355512 3.44 1073058 4026755128741 5.27
1069651 4026755355512 8.33 1075004 4026755128758 5.26
1069652 4026755355529 3.44 1075006 4026755128765 5.26
1069652 4026755355529 8.33 1075008 4026755128772 5.26
1069653 4026755355536 3.44 1075010 4026755128789 5.26
1069653 4026755355536 8.33 1075012 4026755128796 5.26
1075016 4026755128802 5.26
1070006 4026755128321 6.130 1075020 4026755128819 5.26
1070008 4026755128338 6.130 1075704 4026755277548 5.06
1070010 4026755128345 6.130 1075706 4026755277555 5.06
1070108 4026755128352 6.130 1075708 4026755277562 5.06
1070110 4026755128369 6.130 1075710 4026755277579 5.06
1070208 4026755128376 6.130 1075804 4026755327755 5.08
1070210 4026755128383 6.130 1075806 4026755327762 5.08
1070308 4026755128390 6.130 1075808 4026755128833 5.08
1070310 4026755128406 6.130 1075810 4026755335057 5.08
1070408 4026755128413 6.130 1076002 4026755128840 5.07
1071008 4026755128451 6.130 1076003 4026755128857 5.07
1071010 4026755128468 6.130 1076004 4026755128864 5.07
1071012 4026755128475 6.130 1076006 4026755128871 5.07
1071016 4026755128482 6.130 1076008 4026755128888 5.07
1072003 4026755128499 5.26 1076010 4026755128895 5.07
1072004 4026755128505 5.26 1076012 4026755128901 5.07
1072006 4026755128512 5.26 1076016 4026755128918 5.07
20
20.a Indices
Article number

1076020 4026755128925 5.07 1078016 4026755305739 5.04
1076024 4026755128932 5.07 1078092 4026755382624 5.06
1076032 4026755128949 5.07 1078093 4026755382631 5.06
1076071 4026755283365 5.08 1078094 4026755382648 5.06
1076072 4026755283372 5.08 1078094 4026755382648 6.118
1076073 4026755283389 5.08 1078095 4026755382655 5.06
1076081 4026755317503 5.08 1078095 4026755382655 6.118
1076082 4026755317510 5.08 1078096 4026755382662 5.06
1076083 4026755317527 5.08 1078097 4026755382679 5.06
1076084 4026755370874 5.08 1078171 4026755360431 6.118
1076103 4026755128956 5.08 1078172 4026755360448 6.118
1076104 4026755128963 5.08 1078173 4026755360455 6.118
1076106 4026755128970 5.08 1078182 4026755328530 6.118
1076108 4026755128987 5.08 1078194 4026755382686 6.118
1076110 4026755128994 5.08 1078195 4026755382693 6.118
1076203 4026755129021 5.07 1078371 4026755360462 6.118
1076204 4026755129038 5.07 1078372 4026755360479 6.118
1076206 4026755129045 5.07 1078373 4026755360486 6.118
1076208 4026755129052 5.07 1078382 4026755283426 5.10
1076210 4026755129069 5.07 1078382 4026755283426 6.118
1076303 4026755129076 5.08 1078382 4026755283426 8.25
1076304 4026755129083 5.08 1078706 4026755317534 5.10
1076306 4026755129090 5.08 1078706 4026755317534 9.67
1076308 4026755129106 5.08 1078708 4026755317541 5.10
1076310 4026755129113 5.08 1078708 4026755317541 6.118
1077103 4026755129274 5.04 1078708 4026755317541 9.67
1077104 4026755129281 5.04 1078710 4026755317558 5.10
1077106 4026755129298 5.04 1078710 4026755317558 6.118
1077108 4026755129304 5.04 1078710 4026755317558 9.67
1077110 4026755129311 5.04 1078760 4026755345094 5.10
1077112 4026755129328 5.04 1078761 4026755344493 5.10
1077116 4026755129335 5.04 1078761 4026755344493 6.119
1077152 4026755370645 5.05 1078762 4026755344509 5.10
1077153 4026755370652 5.05 1078762 4026755344509 6.119
1077154 4026755370669 5.05 1078790 4026755317565 5.10
1077155 4026755370676 5.05 1078790 4026755317565 9.67
1077156 4026755370683 5.05 1078791 4026755333589 5.10
1077162 4026755344400 5.05 1078791 4026755333589 9.67
1077163 4026755344417 5.05 1079004 4026755232073 5.09
1077164 4026755344424 5.05 1079006 4026755232080 5.09
1077165 4026755344431 5.05 1079008 4026755232097 5.09
1077166 4026755344448 5.05 1079010 4026755232103 5.09
1077171 4026755358377 5.06 1079012 4026755232110 5.09
1077172 4026755358384 5.06 1079016 4026755232127 5.09
1077173 4026755358391 5.06 1079104 4026755232134 5.09
1077181 4026755283396 5.06 1079106 4026755232141 5.09
1077182 4026755283402 5.06 1079108 4026755232158 5.09
1077183 4026755283419 5.06 1079110 4026755232165 5.09
1077303 4026755129502 5.04 1079112 4026755232172 5.09
1077304 4026755129519 5.04 1079116 4026755232189 5.09
1077306 4026755129526 5.04 1079254 4026755353006 5.09
1077308 4026755129533 5.04 1079255 4026755353013 5.09
1077310 4026755129540 5.04 1079256 4026755353020 5.09
1077312 4026755367706 5.04 1079404 4026755232196 5.09
1077316 4026755367713 5.04 1079406 4026755232202 5.09
1077804 4026755262650 5.04 1079704 4026755232295 5.09
1077806 4026755262667 5.04 1079706 4026755232301 5.09
1077808 4026755262674 5.04 1079708 4026755232318 5.09
1077810 4026755357721 5.04 1079710 4026755232325 5.09
1077904 4026755393675 5.09
1077906 4026755393682 5.09 1085206 4026755129885 6.131
1077908 4026755393699 5.09 1085208 4026755129892 6.131
1077910 4026755393705 5.09 1085210 4026755129908 6.131
1077912 4026755393712 5.09 1088203 4026755130102 5.30
1077916 4026755393729 5.09 1088303 4026755130119 2.76
1078003 4026755305678 5.04 1088303 4026755130119 5.30
1078004 4026755305685 5.04 1088304 4026755130126 5.30
1078006 4026755305692 5.04 1088306 4026755130133 5.30
1078008 4026755305708 5.04 1088404 4026755130157 5.30
1078010 4026755305715 5.04 1088806 4026755238792 6.123
1078012 4026755305722 5.04 1088806 4026755238792 9.56
20.20 2017
20
20.a Indices
Article number

1089006 4026755130164 6.123 1110102 4026755131376 6.128
1089008 4026755130171 6.123 1110103 4026755131383 6.128
1089010 4026755130188 6.123 1110104 4026755131390 6.128
1089012 4026755130195 6.123 1110152 4026755131413 6.128
1089052 4026755130201 6.123 1110174 4026755131420 6.128
1089091 4026755130218 3.44 1110204 4026755131437 6.128
1089091 4026755130218 6.123 1110504 4026755131444 6.128
1089091 4026755130218 8.30 1111904 4026755131451 6.128
1089091 4026755130218 8.33 1115004 4026755131468 6.129
1115104 4026755131475 6.129
1090361 4026755130225 1.129 1115204 4026755131482 6.129
1090362 4026755130232 1.129 1116004 4026755131499 6.129
1090363 4026755130249 1.129 1116104 4026755131505 6.129
1090374 4026755344516 1.129 1116204 4026755131512 6.129
1090461 4026755130256 1.129 1117004 4026755131529 6.129
1090462 4026755130263 1.129 1117104 4026755131536 6.129
1090463 4026755130270 1.129 1117204 4026755131543 6.129
1090474 4026755344523 1.129
1090551 4026755130287 1.121 1120002 4026755131550 5.32
1090551 4026755130287 1.123 1120002 4026755131550 9.66
1090551 4026755130287 1.128 1120003 4026755131567 5.32
1090551 4026755130287 1.129 1120003 4026755131567 9.66
1090551 4026755130287 3.62 1120004 4026755131574 5.32
1090661 4026755130294 1.128 1120004 4026755131574 9.66
1090662 4026755130300 1.128 1120006 4026755131581 5.32
1090663 4026755130317 1.128 1120006 4026755131581 8.49
1090672 4026755130324 1.128 1120006 4026755131581 8.53
1090761 4026755130348 1.128 1120006 4026755131581 9.66
1090762 4026755130355 1.128 1120008 4026755131598 5.32
1090763 4026755130362 1.128 1120008 4026755131598 8.49
1090772 4026755130379 1.128 1120008 4026755131598 9.66
1091061 4026755130461 1.130 1120010 4026755131604 5.32
1091062 4026755130478 1.130 1120010 4026755131604 8.49
1091063 4026755130485 1.130 1120010 4026755131604 9.66
1091072 4026755130492 1.130 1120012 4026755131611 5.32
1091161 4026755130522 1.130 1120012 4026755131611 9.66
1091162 4026755130539 1.130 1120016 4026755131628 5.32
1091163 4026755130546 1.130 1120016 4026755131628 9.66
1091172 4026755130553 1.130 1120020 4026755131635 5.32
1091251 4026755130560 1.130 1120020 4026755131635 9.66
1091252 4026755130577 1.130 1120024 4026755131642 5.32
1091253 4026755130584 1.130 1120024 4026755131642 9.66
1091351 4026755130607 1.130 1121002 4026755131659 5.32
1091352 4026755130614 1.130 1121002 4026755131659 9.66
1091353 4026755130621 1.130 1121003 4026755131666 5.32
1098362 4026755130904 1.59 1121003 4026755131666 9.66
1121004 4026755131673 5.32
1100101 4026755130966 1.138 1121004 4026755131673 9.66
1100102 4026755130973 1.138 1121006 4026755131680 5.32
1100103 4026755130980 1.138 1121006 4026755131680 9.66
1100104 4026755130997 1.138 1121008 4026755131697 5.32
1101603 4026755131253 1.138 1121008 4026755131697 9.66
1101604 4026755131260 1.138 1121010 4026755131703 5.32
1101703 4026755131277 1.138 1121010 4026755131703 9.66
1101704 4026755131284 1.138 1121012 4026755131710 5.32
1101706 4026755131291 1.138 1121012 4026755131710 9.66
1102002 4026755299519 1.138 1121016 4026755131727 5.32
1102003 4026755299526 1.138 1121016 4026755131727 9.66
1102004 4026755328882 1.138 1121020 4026755131734 5.32
1103051 4026755131345 1.138 1121020 4026755131734 9.66
1103151 4026755131352 1.138 1121024 4026755131741 5.32
1109001 4026755172379 1.138 1121024 4026755131741 9.66
1109001 4026755172379 8.64 1122045 4026755251364 5.33
1109001 4026755172379 8.70 1122046 4026755251371 5.33
1109001 4026755172379 8.72 1122047 4026755251388 5.33
1109002 4026755172386 1.138 1122048 4026755251395 5.33
1109002 4026755172386 8.64 1122049 4026755251401 5.33
1109003 4026755172393 1.138 1122050 4026755202076 5.33
1109003 4026755172393 8.64 1122051 4026755131819 5.33
1122052 4026755131826 5.33
1110003 4026755131369 6.128 1122053 4026755131833 5.33
20
20.a Indices
Article number

1122054 4026755131840 5.33 1130095 4026755401899 3.80
1122055 4026755131857 5.33 1130095 4026755401899 9.63
1122056 4026755131864 5.33 1130096 4026755132120 3.80
1122057 4026755131871 5.33 1130096 4026755132120 9.63
1122058 4026755131888 5.33 1130098 4026755401905 3.80
1122059 4026755171624 5.33 1130098 4026755401905 9.63
1122060 4026755340082 5.33 1130191 4026755401912 3.80
1122061 4026755340150 5.33 1130191 4026755401912 9.63
1122062 4026755340167 5.33 1130192 4026755132137 3.80
1122063 4026755340174 5.33 1130192 4026755132137 9.63
1122085 4026755279221 5.33 1130193 4026755132144 3.80
1122087 4026755279245 5.33 1130193 4026755132144 9.63
1122088 4026755279252 5.33 1130194 4026755132151 3.80
1122089 4026755279269 5.33 1130194 4026755132151 9.63
1122090 4026755279276 5.33 1130195 4026755132168 3.80
1122091 4026755279283 5.33 1130195 4026755132168 9.63
1122092 4026755279290 5.33 1130196 4026755132175 3.80
1122093 4026755279306 5.33 1130196 4026755132175 9.63
1122094 4026755279313 5.33 1130197 4026755132182 3.80
1122095 4026755279320 5.33 1130197 4026755132182 9.63
1122096 4026755279337 5.33 1130198 4026755401929 3.80
1122097 4026755279344 5.33 1130198 4026755401929 9.63
1122098 4026755279351 5.33 1130199 4026755401936 3.80
1122159 4026755408027 5.33 1130199 4026755401936 9.63
1122160 4026755408034 5.33 1130206 4026755187755 2.73
1122161 4026755408041 5.33 1130206 4026755187755 3.79
1122162 4026755408058 5.33 1130206 4026755187755 9.62
1122163 4026755408065 5.33 1130206 4026755187755 10.10
1123003 4026755131895 5.32 1130208 4026755187762 2.73
1123003 4026755131895 9.66 1130208 4026755187762 3.79
1123004 4026755131901 5.32 1130208 4026755187762 9.62
1123004 4026755131901 9.66 1130212 4026755187779 2.73
1123006 4026755131918 5.32 1130212 4026755187779 3.79
1123006 4026755131918 9.66 1130212 4026755187779 9.62
1123008 4026755131925 5.32 1130291 4026755401943 3.80
1123008 4026755131925 9.66 1130291 4026755401943 9.63
1123010 4026755131932 5.32 1130292 4026755132199 3.80
1123010 4026755131932 9.66 1130292 4026755132199 9.63
1123012 4026755131949 5.32 1130293 4026755132205 3.80
1123012 4026755131949 9.66 1130293 4026755132205 9.63
1123016 4026755131956 5.32 1130294 4026755132212 3.80
1123016 4026755131956 9.66 1130294 4026755132212 9.63
1123020 4026755131963 5.32 1130295 4026755132229 3.80
1123020 4026755131963 9.66 1130295 4026755132229 9.63
1123024 4026755131970 5.32 1130296 4026755132236 3.80
1123024 4026755131970 9.66 1130296 4026755132236 9.63
1123103 4026755131987 5.32 1130298 4026755401950 3.80
1123103 4026755131987 9.66 1130298 4026755401950 9.63
1123104 4026755131994 5.32 1130299 4026755401967 3.80
1123104 4026755131994 9.66 1130299 4026755401967 9.63
1123106 4026755132007 5.32 1130845 4026755367065 3.81
1123106 4026755132007 9.66 1130846 4026755367072 3.81
1123108 4026755132014 5.32 1130847 4026755367089 3.81
1123108 4026755132014 9.66 1130848 4026755367096 3.81
1123110 4026755132021 5.32 1130849 4026755367102 3.81
1123110 4026755132021 9.66 1130850 4026755367218 3.81
1123112 4026755132038 5.32 1130851 4026755366242 3.81
1123112 4026755132038 9.66 1130852 4026755366259 3.81
1123116 4026755132045 5.32 1130853 4026755366266 3.81
1123116 4026755132045 9.66 1130854 4026755366273 3.81
1123120 4026755132052 5.32 1130855 4026755366280 3.81
1123120 4026755132052 9.66 1130865 4026755406900 3.81
1123124 4026755132069 5.32 1130866 4026755406917 3.81
1123124 4026755132069 9.66 1130875 4026755406924 3.81
1131204 4026755397390 2.73
1130091 4026755401882 3.80 1131204 4026755397390 3.79
1130091 4026755401882 9.63 1131204 4026755397390 9.62
1130093 4026755132106 3.80 1131206 4026755397406 2.73
1130093 4026755132106 9.63 1131206 4026755397406 3.79
1130094 4026755132113 3.80 1131206 4026755397406 9.62
1130094 4026755132113 9.63 1131208 4026755397413 2.73
20.22 2017
20
20.a Indices
Article number

1131208 4026755397413 3.79 1140574 4026755187908 3.81
1131208 4026755397413 9.62 1140574 4026755187908 9.64
1131210 4026755397420 2.73 1140591 4026755370942 3.58
1131210 4026755397420 3.79 1140592 4026755370959 3.58
1131210 4026755397420 9.62 1140593 4026755370966 3.58
1131212 4026755397437 2.73 1140594 4026755370973 3.58
1131212 4026755397437 3.79 1140595 4026755370980 3.58
1131212 4026755397437 9.62 1140596 4026755370997 3.58
1131216 4026755397444 2.73 1140597 4026755371000 3.58
1131216 4026755397444 3.79 1140691 4026755371017 3.58
1131216 4026755397444 9.62 1140692 4026755371024 3.58
1131706 4026755187816 2.73 1140693 4026755371031 3.58
1131706 4026755187816 3.79 1140694 4026755371048 3.58
1131706 4026755187816 9.62 1140695 4026755371055 3.58
1131706 4026755187816 10.10 1140696 4026755371062 3.58
1131708 4026755187823 2.73 1140697 4026755371079 3.58
1131708 4026755187823 3.79 1140698 4026755371086 3.58
1131708 4026755187823 9.62 1140791 4026755371093 3.58
1131712 4026755187830 2.73 1140792 4026755371109 3.58
1131712 4026755187830 3.79 1140793 4026755371116 3.58
1131712 4026755187830 9.62 1140794 4026755371123 3.58
1132004* 4026755440782 3.65 1140795 4026755371130 3.58
1132006* 4026755443608 3.65 1140796 4026755371147 3.58
1132020* 4026755446616 3.65 1140797 4026755371154 3.58
1132030* 4026755446623 3.65 1140892 4026755371161 3.58
1140893 4026755371178 3.58
1140181 4026755263763 3.60 1140894 4026755371185 3.58
1140181 4026755263763 3.65 1140895 4026755371192 3.58
1140182 4026755263770 3.60 1141004 4026755395860 3.72
1140182 4026755263770 3.65 1141004 4026755395860 5.32
1140183 4026755263787 3.60 1141006 4026755395877 3.72
1140183 4026755263787 3.65 1141006 4026755395877 5.32
1140184 4026755263794 3.60 1141091 4026755191691 3.81
1140184 4026755263794 3.65 1141091 4026755191691 9.64
1140191 4026755250923 3.78 1141292* 4026755447323 3.58
1140192 4026755250930 3.78 1141293* 4026755447330 3.58
1140281* 4026755447293 3.58 1141294* 4026755447347 3.58
1140282 4026755263800 3.58 1141295* 4026755447354 3.58
1140284 4026755263817 3.58 1141704 4026755187915 3.84
1140285* 4026755447309 3.58 1141706 4026755187922 3.84
1140286* 4026755447316 3.58 1141708 4026755187939 3.84
1140292 4026755250947 3.78 1141804 4026755187946 3.84
1140351 4026755382198 3.62 1141806 4026755187953 3.84
1140352 4026755382204 3.62 1141808 4026755187960 3.84
1140380 4026755263824 3.60 1141904 4026755187977 3.84
1140380 4026755263824 3.65 1141906 4026755187984 3.84
1140381 4026755263831 3.60 1141951 4026755248449 2.72
1140381 4026755263831 3.65 1141951 4026755248449 3.88
1140382 4026755263848 3.60 1142504 4026755183108 3.78
1140382 4026755263848 3.65 1142561 4026755271591 3.78
1140383 4026755263855 3.60 1142604 4026755277845 3.78
1140383 4026755263855 3.65 1142751 4026755299236 3.78
1140384 4026755263862 3.60 1142752 4026755299243 3.78
1140384 4026755263862 3.65 1142753 4026755299250 3.78
1140390 4026755251418 3.78 1142861 4026755187991 3.81
1140391 4026755251425 3.78 1142861 4026755187991 6.44
1140392 4026755251432 3.78 1142861 4026755187991 9.64
1140551 4026755387605 3.62 1142862 4026755188004 3.81
1140552 4026755387612 3.62 1142862 4026755188004 6.44
1140561 4026755187847 3.81 1142862 4026755188004 9.64
1140561 4026755187847 9.64 1142863 4026755188011 3.81
1140562 4026755187854 3.81 1142863 4026755188011 6.44
1140562 4026755187854 9.64 1142863 4026755188011 9.64
1140563 4026755187861 3.81 1142864 4026755188028 3.81
1140563 4026755187861 9.64 1142864 4026755188028 6.44
1140564 4026755187878 3.81 1142864 4026755188028 9.64
1140564 4026755187878 9.64 1143000 4026755132656 6.96
1140571 4026755187885 3.81 1143000 4026755132656 10.09
1140571 4026755187885 9.64 1143104* 4026755421569 3.52
1140572 4026755187892 3.81 1143116* 4026755428889 3.56
1140572 4026755187892 9.64 1143154* 4026755438833 3.56
20
20.a Indices
Article number

1143155* 4026755438840 3.56 1145610 4026755347579 3.54
1143163* 4026755421583 3.52 1145663 4026755363982 1.99
1143164* 4026755421590 3.52 1145663 4026755363982 3.54
1143204* 4026755421613 3.52 1145664 4026755347586 1.99
1143206* 4026755421620 3.52 1145664 4026755347586 3.54
1143208* 4026755421637 3.52 1145664 4026755347586 3.72
1143210* 4026755421644 3.52 1145666 4026755347593 1.99
1143263* 4026755421651 3.52 1145666 4026755347593 3.54
1143264* 4026755421668 3.52 1145666 4026755347593 3.72
1143266* 4026755421675 3.52 1145668 4026755347609 3.54
1143268* 4026755421682 3.52 1145670 4026755347616 3.54
1143270* 4026755421699 3.52 1145704 4026755347623 1.99
1143304* 4026755421705 3.52 1145704 4026755347623 3.54
1143364* 4026755421712 3.52 1145764 4026755347630 1.99
1143504* 4026755421729 3.52 1145764 4026755347630 3.54
1143563* 4026755421743 3.52 1145764 4026755347630 3.72
1143564* 4026755421750 3.52 1146004 4026755244960 3.54
1143604* 4026755421774 3.52 1146006 4026755306699 3.54
1143606* 4026755421781 3.52 1146063 4026755363999 3.54
1143608* 4026755421798 3.52 1146064 4026755347647 3.54
1143610* 4026755421804 3.52 1146064 4026755347647 3.72
1143663* 4026755421811 3.52 1146066 4026755347654 3.54
1143664* 4026755421828 3.52 1146066 4026755347654 3.72
1143666* 4026755421835 3.52 1146091 4026755357875 1.100
1143668* 4026755421842 3.52 1146104 4026755244977 3.54
1143670* 4026755421859 3.52 1146106 4026755347661 3.54
1143704* 4026755421866 3.52 1146108 4026755340181 3.54
1143764* 4026755421873 3.52 1146110 4026755340198 3.54
1144251 4026755188035 2.80 1146112 4026755353051 3.56
1144252 4026755188042 2.80 1146116 4026755372458 3.56
1144253 4026755306415 2.81 1146149 4026755372465 3.56
1144564 4026755411676 3.55 1146150 4026755355246 3.56
1144566 4026755411683 3.55 1146151 4026755355253 3.56
1144664 4026755411690 3.55 1146152 4026755355260 3.56
1144666 4026755411706 3.55 1146153 4026755355277 3.56
1144764 4026755411713 3.55 1146154 4026755355284 3.56
1144864* 4026755421880 3.53 1146155 4026755355291 3.56
1144964* 4026755421903 3.53 1146156 4026755391176 3.56
1144966* 4026755421910 3.53 1146163 4026755364002 3.54
1145004 4026755212228 3.61 1146164 4026755347678 3.54
1145064* 4026755421927 3.53 1146164 4026755347678 3.72
1145074 4026755277043 3.61 1146166 4026755347685 3.54
1145085 4026755330762 3.61 1146166 4026755347685 3.72
1145085 4026755330762 3.98 1146168 4026755347692 3.54
1145099 4026755278705 3.61 1146170 4026755347708 3.54
1145099 4026755278705 3.98 1146172 4026755353068 3.56
1145104 4026755212235 3.61 1146174 4026755372472 3.56
1145174 4026755277050 3.61 1146204 4026755244984 3.54
1145204 4026755230697 3.61 1146264 4026755347715 3.54
1145274 4026755277067 3.61 1146264 4026755347715 3.72
1145371 4026755277074 3.61 1146649 4026755411720 3.57
1145372 4026755277081 3.61 1146650 4026755411737 3.57
1145373 4026755277098 3.61 1146651 4026755411744 3.57
1145475 4026755280593 3.61 1146652 4026755411751 3.57
1145504 4026755347500 1.99 1146653 4026755411768 3.57
1145504 4026755347500 3.54 1146654 4026755411775 3.57
1145506 4026755347517 1.99 1146655 4026755411782 3.57
1145506 4026755347517 3.54 1146656 4026755411799 3.57
1145563 4026755363975 1.99 1147169 4026755191257 3.20
1145563 4026755363975 3.54 1147169 4026755191257 3.84
1145564 4026755347524 1.99 1147204* 4026755305623 3.52
1145564 4026755347524 3.54 1147304* 4026755421941 3.52
1145564 4026755347524 3.72 1147306* 4026755421958 3.52
1145566 4026755347531 1.99 1147308* 4026755421965 3.52
1145566 4026755347531 3.54 1147310* 4026755421972 3.52
1145566 4026755347531 3.72 1147404* 4026755421989 3.52
1145604 4026755347548 1.99 1147504 4026755394849 3.55
1145604 4026755347548 3.54 1147506 4026755394856 3.55
1145606 4026755347555 1.99 1147604 4026755394863 3.55
1145606 4026755347555 3.54 1147606 4026755394870 3.55
1145608 4026755347562 3.54 1147608 4026755394887 3.55
20
20.a Indices
Article number

1147610 4026755394894 3.55 1150682 4026755410778 1.35
1147704 4026755394900 3.55 1150682 4026755410778 2.33
1148504 4026755414448 3.55 1150682 4026755410778 12.12
1148506 4026755414455 3.55 1150683 4026755410822 1.32
1148604 4026755414462 3.55 1150684 4026755414790 1.35
1148606 4026755414479 3.55 1150684 4026755414790 2.33
1148608 4026755414486 3.55 1150684 4026755414790 12.12
1148610 4026755414493 3.55 1150685 4026755406665 1.32
1148704 4026755414509 3.55 1150687 4026755417609 1.39
1149004 4026755342765 3.62 1150687 4026755417609 2.35
1149011 4026755411034 3.59 1150687 4026755417609 12.11
1149021 4026755411041 3.59 1150688 4026755423396 1.32
1149031 4026755411058 3.59 1150692 4026755414073 1.37
1149041 4026755411065 3.59 1150692 4026755414073 2.34
1149068 4026755400380 1.100 1150692 4026755414073 12.16
1149068 4026755400380 1.112 1150694 4026755414080 1.37
1149070 4026755395884 3.74 1150694 4026755414080 2.34
1149071 4026755395891 3.74 1150694 4026755414080 12.16
1149075 4026755395907 3.74 1150699 4026755430370 1.37
1149076 4026755395914 3.74 1150699 4026755430370 2.34
1149090 4026755367232 1.100 1150699 4026755430370 12.16
1149091 4026755394146 1.100 1150710* 4026755448245 1.37
1149095 4026755407075 3.59 1150710* 4026755448245 12.15
1149104 4026755393965 3.59 1150765 4026755430387 1.29
1149106 4026755393972 3.59 1150765 4026755430387 3.92
1149108 4026755393989 3.59 1150765 4026755430387 12.17
1149190 4026755394009 3.59 1150770 4026755421095 2.36
1149190 4026755394009 3.75 1150770 4026755421095 12.13
1149204* 4026755421996 3.53 1150771 4026755421101 2.36
1149304* 4026755422016 3.53 1150771 4026755421101 12.13
1149306* 4026755422023 3.53 1150772 4026755421118 2.36
1149308* 4026755422030 3.53 1150772 4026755421118 12.13
1149310* 4026755422047 3.53 1150773 4026755421125 2.36
1149404* 4026755422054 3.53 1150773 4026755421125 12.13
1149450 4026755430097 3.69 1150774 4026755425543 2.36
1149504 4026755395921 3.72 1150774 4026755425543 12.13
1149506 4026755395938 3.72 1150780* 12.17
1149550 4026755408683 3.69 1150880 4026755435146 1.35
1149551 4026755408690 3.69 1150880 4026755435146 2.33
1149552 4026755430035 3.69 1150880 4026755435146 12.12
1149553 4026755436686 3.69 1150881 4026755435153 1.35
1149554 4026755437010 3.69 1150881 4026755435153 2.33
1149560 4026755408614 3.70 1150881 4026755435153 12.12
1149561 4026755408621 3.70 1150882 4026755435160 1.35
1149562 4026755436693 3.70 1150882 4026755435160 2.33
1149563 4026755436709 3.70 1150882 4026755435160 12.12
1149564 4026755436716 3.70 1150884 4026755435177 1.35
1149581 4026755414387 3.75 1150884 4026755435177 2.33
1149650 4026755430103 3.69 1150884 4026755435177 12.12
1149651 4026755430110 3.69 1151000 4026755281613 2.68
1151060 4026755332148 2.74
1150004 4026755428988 12.37 1151065 4026755404937 2.74
1150006 4026755372052 12.37 1151080 4026755306422 2.69
1150008 4026755428995 12.37 1151081 4026755306439 2.69
1150090 4026755388688 8.56 1151082 4026755306446 2.69
1150090 4026755388688 12.37 1151085 4026755306477 2.69
1150104 4026755429008 12.37 1151086 4026755390605 2.69
1150106 4026755429015 12.37 1151087 4026755390612 2.69
1150108 4026755429022 12.37 1151087 4026755390612 2.72
1150300 4026755320282 12.27 1151088 4026755407488 2.69
1150390 4026755332292 12.27 1151089 4026755435368 2.69
1150665 4026755400151 1.36 1151300 4026755395181 2.68
1150665 4026755400151 12.13 1151500 4026755340006 2.68
1150675 4026755420050 1.36 1151600 4026755401523 2.68
1150675 4026755420050 12.13 1151800 4026755404944 2.68
1150680 4026755400557 1.35 1152000 4026755306880 2.72
1150680 4026755400557 2.33 1152051 4026755132748 1.20
1150680 4026755400557 12.12 1152051 4026755132748 2.28
1150681 4026755409130 1.35 1152051 4026755132748 3.86
1150681 4026755409130 2.33 1152051 4026755132748 6.73
1150681 4026755409130 12.12 1152051 4026755132748 6.97
20
20.a Indices
Article number

1152051 4026755132748 12.45 1152552 4026755132779 1.20
1152052 4026755227017 1.20 1152552 4026755132779 2.28
1152052 4026755227017 2.28 1152552 4026755132779 3.86
1152052 4026755227017 3.86 1152552 4026755132779 6.97
1152052 4026755227017 6.73 1152552 4026755132779 12.45
1152052 4026755227017 12.28 1152554 4026755338843 1.20
1152052 4026755227017 12.45 1152554 4026755338843 2.28
1152055 4026755434088 1.20 1152554 4026755338843 3.86
1152055 4026755434088 2.28 1152554 4026755338843 12.45
1152055 4026755434088 3.86 1152561 4026755363395 1.20
1152055 4026755434088 6.73 1152561 4026755363395 1.100
1152063 4026755340853 1.21 1152561 4026755363395 2.28
1152064 4026755425550 1.22 1152561 4026755363395 3.87
1152064 4026755425550 3.88 1152561 4026755363395 6.96
1152065 4026755425567 1.22 1152562 4026755363401 1.20
1152065 4026755425567 3.88 1152562 4026755363401 1.100
1152071 4026755308082 1.20 1152562 4026755363401 2.28
1152071 4026755308082 2.28 1152562 4026755363401 3.87
1152071 4026755308082 3.87 1153050 4026755359039 12.32
1152072 4026755308099 1.20 1153053 4026755393514 12.25
1152072 4026755308099 2.28 1153053 4026755393514 12.31
1152072 4026755308099 3.87 1153053 4026755393514 12.37
1152086 4026755436723 6.71 1153055 4026755392883 12.25
1152086 4026755436723 12.42 1153055 4026755392883 12.31
1152087 4026755436389 6.73 1153055 4026755392883 12.37
1152087 4026755436389 12.44 1153060 4026755332308 2.34
1152088 4026755432824 6.72 1153060 4026755332308 12.26
1152088 4026755432824 12.42 1153060 4026755332308 12.32
1152089 4026755429756 6.31 1153070 4026755336238 1.37
1152089 4026755429756 6.74 1153070 4026755336238 2.34
1152089 4026755429756 6.109 1153070 4026755336238 12.16
1152090 4026755423402 2.70 1153070 4026755336238 12.26
1152090 4026755423402 6.71 1153070 4026755336238 12.32
1152090 4026755423402 12.42 1153101 4026755384499 12.25
1152092 4026755343816 2.70 1153101 4026755384499 12.31
1152092 4026755343816 6.71 1153118 4026755384505 12.26
1152092 4026755343816 6.96 1153118 4026755384505 12.32
1152093 4026755383966 2.70 1153121 4026755382341 12.25
1152093 4026755383966 6.71 1153128 4026755382358 12.26
1152093 4026755383966 6.96 1153130 4026755394153 12.26
1152093 4026755383966 12.42 1153150 4026755382365 12.25
1152095 4026755393163 2.71 1153151 4026755392890 12.25
1152095 4026755393163 6.73 1153170 4026755392906 12.25
1152095 4026755393163 12.44 1153170 4026755392906 12.31
1152096 4026755375923 2.71 1153180 4026755359053 12.26
1152096 4026755375923 6.73 1153180 4026755359053 12.32
1152096 4026755375923 6.96 1153195 4026755393354 12.26
1152096 4026755375923 12.44 1153250 4026755372106 12.31
1152098 4026755375947 2.70 1153251 4026755392913 12.31
1152098 4026755375947 6.72 1153271 4026755382471 12.32
1152098 4026755375947 12.43 1153301 4026755382488 12.38
1152099 4026755413229 6.71 1153321 4026755382495 12.38
1152099 4026755413229 12.42 1153331 4026755398960 12.38
1152100 4026755405101 2.72 1153350 4026755382501 12.37
1152151 4026755217216 1.21 1153351 4026755392920 12.37
1152151 4026755217216 2.29 1156051 4026755168402 1.29
1152151 4026755217216 3.86 1156051 4026755168402 3.92
1152153 4026755424751 1.22 1156065 4026755215557 1.29
1152153 4026755424751 3.86 1156065 4026755215557 3.92
1152265 4026755364019 12.27 1156066 4026755256475 1.29
1152351 4026755309935 1.22 1156066 4026755256475 3.92
1152351 4026755309935 3.87 1156075 4026755215564 1.29
1152451 4026755336092 1.22 1156076 4026755256482 1.29
1152451 4026755336092 3.87 1157065 4026755215571 1.29
1152452 4026755336108 1.22 1157065 4026755215571 3.92
1152452 4026755336108 3.87 1157075 4026755232356 1.29
1152551 4026755132762 1.20 1158010 4026755370799 3.91
1152551 4026755132762 2.28 1158011 4026755409239 3.91
1152551 4026755132762 3.86 1158020 4026755409147 3.91
1152551 4026755132762 6.97 1158021 4026755409154 3.91
1152551 4026755132762 12.45 1158022 4026755409161 3.91
20
20.a Indices
Article number

1158030 4026755370805 3.91 1169392 4026755133448 1.74
1158031 4026755370812 3.91 1169393 4026755133455 1.74
1158032 4026755399202 3.91 1169394 4026755133462 1.74
1158033 4026755436792 3.91 1169492 4026755304114 1.74
1159091 4026755363036 6.71 1169493 4026755304121 1.74
1159095 4026755383973 12.41 1169553 4026755286557 1.74
1159096 4026755417616 12.41 1169563 4026755286564 1.74
1159097* 4026755448054 12.41 1169592 4026755333541 1.74
1169593 4026755333558 1.74
1162054 4026755436341 1.52
1162154 4026755436358 1.52 1180584 4026755186222 1.93
1162472 4026755436730 1.52 1180585 4026755186239 1.93
1162473 4026755436747 1.52 1180586 4026755186246 1.93
1163032 4026755200157 1.72 1180587 4026755186253 1.93
1163042 4026755191066 1.72 1180603 4026755186260 1.53
1163052 4026755172096 1.72 1180604 4026755186277 1.53
1163062 4026755172102 1.72 1180606 4026755186284 1.53
1163072 4026755191073 1.72 1180703 4026755186291 1.53
1163082 4026755330175 1.72 1180704 4026755186307 1.53
1163132 4026755200164 1.72 1180706 4026755186314 1.53
1163142 4026755191080 1.72 1180791 4026755186321 1.53
1163152 4026755172119 1.72 1180791 4026755186321 1.105
1163162 4026755172126 1.72 1180793 4026755205497 1.53
1163172 4026755191097 1.72 1180903 4026755420739 1.53
1163182 4026755330182 1.72 1180904 4026755420746 1.53
1163232 4026755200171 1.72 1180955 4026755186352 1.54
1163252 4026755172133 1.72 1180957 4026755246032 1.54
1163262 4026755172140 1.72 1180964 4026755186369 1.54
1163432 4026755200188 1.72 1180965 4026755186376 1.54
1163433 4026755204667 1.72 1180967 4026755186390 1.54
1163452 4026755172157 1.72 1181003 4026755401219 1.62
1163453 4026755172171 1.72 1181004 4026755401226 1.62
1163462 4026755172164 1.72 1181006 4026755401233 1.62
1163463 4026755172188 1.72 1181008 4026755401240 1.62
1163482 4026755330199 1.72 1181010 4026755401257 1.62
1163483 4026755330205 1.72 1181097 4026755401264 1.63
1163552 4026755423419 1.44 1181103 4026755401271 1.62
1163562 4026755423426 1.44 1181104 4026755401288 1.62
1163652 4026755423433 1.44 1181106 4026755401295 1.62
1163662 4026755423440 1.44 1181108 4026755401301 1.62
1164052 4026755332629 1.75 1181110 4026755401318 1.62
1164152 4026755332636 1.75 1181197 4026755401325 1.63
1164352 4026755332643 1.75 1181304 4026755407730 1.86
1164452 4026755332650 1.75 1181304 4026755407730 1.90
1164554 4026755436365 1.128 1181390 4026755401561 1.62
1165554 4026755436372 1.128 1181391 4026755401578 1.62
1166032 4026755200195 1.74 1181392 4026755401585 1.62
1166042 4026755133080 1.74 1181392 4026755401585 1.86
1166052 4026755133103 1.74 1181392 4026755401585 1.90
1166062 4026755133127 1.74 1181393 4026755401592 1.62
1166072 4026755133141 1.74 1181393 4026755401592 1.86
1166082 4026755330212 1.74 1181393 4026755401592 1.90
1167032 4026755200201 1.74 1181396 4026755401349 1.63
1167042 4026755133165 1.74 1181397 4026755401356 1.63
1167052 4026755133189 1.74 1181403 4026755420753 1.62
1167062 4026755133202 1.74 1181404 4026755420760 1.62
1167072 4026755133226 1.74 1181404 4026755420760 1.86
1167082 4026755330229 1.74 1181404 4026755420760 1.90
1167552 4026755173512 1.74 1181406 4026755420777 1.62
1167562 4026755173529 1.74 1181460 4026755224665 1.53
1168052 4026755279740 1.73 1181461 4026755224672 1.53
1168152 4026755279757 1.73 1181462 4026755224689 1.53
1169092 4026755133325 1.74 1181463 4026755224696 1.53
1169093 4026755133332 1.74 1181492 4026755420784 1.63
1169094 4026755133349 1.74 1182051 4026755251463 1.91
1169192 4026755133363 1.74 1182151 4026755251470 1.91
1169193 4026755133370 1.74 1182551 4026755251487 1.87
1169194 4026755133387 1.74 1182651 4026755251494 1.87
1169292 4026755133400 1.74 1183003* 4026755449075 1.43
1169293 4026755133417 1.74 1183004* 4026755449082 1.43
1169294 4026755133424 1.74 1183006* 4026755449099 1.43
20
20.a Indices
Article number

1183063 4026755416107 1.42 1184076 4026755431476 1.46
1183064 4026755416114 1.42 1184077 4026755384291 1.46
1183066 4026755416121 1.42 1184077 4026755384291 1.82
1183068* 4026755440799 1.42 1184083 4026755241679 1.78
1183103* 4026755449105 1.43 1184084 4026755241686 1.78
1183104* 4026755449112 1.43 1184086 4026755384307 1.82
1183106* 4026755449129 1.43 1184087 4026755384314 1.46
1183163 4026755416138 1.42 1184087 4026755384314 1.82
1183164 4026755416145 1.42 1184088 4026755348835 1.79
1183166 4026755416152 1.42 1184089 4026755348842 1.79
1183168* 4026755440805 1.42 1184090 4026755316018 1.79
1183203* 4026755449136 1.43 1184091 4026755316025 1.79
1183204* 4026755449143 1.43 1184092 4026755312102 1.81
1183263 4026755416169 1.42 1184093 4026755312119 1.81
1183264 4026755418972 1.42 1184094 4026755417623 1.46
1183266 4026755431544 1.42 1184094 4026755417623 1.82
1183350* 4026755449150 1.43 1184095 4026755271607 1.79
1183351* 4026755449167 1.43 1184096 4026755268942 1.79
1183352* 4026755449174 1.43 1184097 4026755277302 1.79
1183353* 4026755449181 1.43 1184098 4026755277319 1.79
1183360 4026755431551 1.42 1184135 4026755319583 1.81
1183361 4026755431568 1.42 1184183 4026755314977 1.80
1183362 4026755424768 1.42 1184184 4026755314984 1.80
1183363 4026755424775 1.42 1184185 4026755422641 1.80
1183446 4026755422153 1.51 1184186 4026755420586 1.80
1183447 4026755422160 1.51 1184188 4026755422658 1.83
1183470 4026755407211 1.50 1184189 4026755431186 1.83
1183471 4026755407228 1.50 1184235 4026755319590 1.81
1183472 4026755407235 1.50 1184283 4026755314991 1.80
1183473 4026755407242 1.50 1184284 4026755315004 1.80
1183561 4026755186406 1.92 1184285 4026755422665 1.80
1183571 4026755186413 1.92 1184286 4026755420593 1.80
1183581 4026755186420 1.87 1184288 4026755422672 1.83
1183661 4026755186444 1.87 1184289 4026755431193 1.83
1183671 4026755248975 1.92 1184383 4026755332490 1.80
1183703 4026755407259 1.50 1184384 4026755332506 1.80
1183704 4026755407266 1.50 1184703 4026755401363 1.65
1183706 4026755407273 1.50 1184704 4026755401370 1.65
1183708 4026755407280 1.50 1184706 4026755401387 1.65
1183747 4026755422177 1.51 1184803 4026755401394 1.65
1183775 4026755407297 1.50 1184804 4026755401400 1.65
1183793 4026755431629 1.58 1184806 4026755401417 1.65
1183794 4026755431636 1.58 1185003 4026755422719 1.57
1183803 4026755407303 1.50 1185004 4026755422726 1.57
1183804 4026755407310 1.50 1185006 4026755422733 1.57
1183806 4026755407327 1.50 1185103 4026755422740 1.57
1183808 4026755407334 1.50 1185104 4026755422757 1.57
1183847 4026755422184 1.51 1185106 4026755422764 1.57
1183875 4026755407341 1.50 1185503 4026755430394 1.42
1183893 4026755431643 1.58 1185504 4026755430400 1.42
1183894 4026755431650 1.58 1185506 4026755430417 1.42
1183903 4026755407358 1.50 1185603 4026755430424 1.42
1183904 4026755407365 1.50 1185604 4026755430431 1.42
1183906 4026755407372 1.50 1185606 4026755430448 1.42
1183942 4026755422191 1.51 1186001 4026755191806 1.109
1183961 4026755191790 1.105 1186001 4026755191806 3.19
1183961 4026755191790 1.110 1186002 4026755431674 1.109
1183962 4026755414110 1.51 1186052 4026755251500 1.109
1183962 4026755414110 3.18 1186052 4026755251500 3.20
1184005 4026755431667 1.86 1186053 4026755251517 1.109
1184013 4026755241655 1.78 1186053 4026755251517 3.20
1184014 4026755241662 1.78 1186054 4026755297980 1.109
1184016 4026755384284 1.82 1186054 4026755297980 3.20
1184023 4026755291087 1.78 1186200 4026755191813 1.109
1184024 4026755291094 1.78 1186200 4026755191813 3.20
1184025 4026755312089 1.81 1187047 4026755414424 1.108
1184033 4026755291100 1.78 1187047 4026755414424 2.26
1184034 4026755291117 1.78 1187047 4026755414424 3.19
1184035 4026755312096 1.81 1187049 4026755407747 1.108
1184073 4026755423457 1.45 1187055* 4026755449198 1.47
1184074 4026755423464 1.45 1187056 4026755191820 1.109
20
20.a Indices
Article number

1187057 4026755167566 1.108 1191603 4026755251692 1.116
1187057 4026755167566 2.26 1191604 4026755251708 1.116
1187057 4026755167566 3.19 1191606 4026755296464 1.116
1187059 4026755429817 1.108 1194503 4026755257953 1.116
1187060 4026755191837 1.108 1194504 4026755257960 1.116
1187060 4026755191837 3.19 1194506 4026755304152 1.116
1187065 4026755417975 1.47 1194603 4026755257977 1.116
1187065 4026755417975 1.108 1194604 4026755257984 1.116
1187065 4026755417975 3.19 1194606 4026755304169 1.116
1187069 4026755167559 1.108
1187069 4026755167559 3.19 1300200 4026755133516 8.48
1187070 4026755191844 1.109 1300200 4026755133516 9.65
1187070 4026755191844 3.20 1300251 4026755133523 8.48
1187071 4026755235104 1.109 1300251 4026755133523 9.65
1187071 4026755235104 3.20 1300306 4026755372533 8.48
1187077 4026755251777 1.79 1300306 4026755372533 9.65
1187077 4026755251777 1.109 1300308 4026755372540 8.48
1187077 4026755251777 2.26 1300308 4026755372540 9.65
1187078 4026755432862 1.79 1300310 4026755372557 8.48
1187078 4026755432862 1.109 1300310 4026755372557 9.65
1187078 4026755432862 2.26 1300351 4026755133530 8.48
1187090* 4026755436402 1.47 1300351 4026755133530 9.65
1187090* 4026755436402 1.108 1300352 4026755133547 8.48
1187352 4026755169430 1.108 1300352 4026755133547 9.65
1187352 4026755169430 3.19 1300381 4026755133554 8.49
1187504 4026755393521 1.64 1300381 4026755133554 9.65
1187506 4026755393538 1.64 1300382 4026755133561 8.49
1187604 4026755391589 1.64 1300382 4026755133561 9.65
1187606 4026755391596 1.64 1300383 4026755133578 8.49
1187608 4026755391602 1.64 1300383 4026755133578 9.65
1188051 4026755182279 1.47 1300385 4026755399080 8.49
1188051 4026755182279 1.60 1300386 4026755399097 8.49
1188051 4026755182279 3.21 1300391 4026755133608 8.49
1188092 4026755252828 1.60 1300391 4026755133608 9.65
1188093 4026755311150 1.47 1300392 4026755133615 8.49
1188093 4026755311150 1.60 1300392 4026755133615 9.65
1188093 4026755311150 3.21 1300393 4026755133622 8.49
1188094 4026755417630 1.47 1300393 4026755133622 9.65
1188094 4026755417630 1.60 1300394 4026755133639 8.49
1188363 4026755431681 1.56 1300394 4026755133639 9.65
1188364 4026755431698 1.56 1300952 4026755133684 8.49
1188366 4026755431704 1.56 1300952 4026755133684 9.65
1188400 4026755191868 1.60 1300953 4026755389784 8.49
1188400 4026755191868 3.21 1300954 4026755389791 8.49
1188406 4026755416466 1.64 1302006 4026755133745 8.49
1188408 4026755416473 1.64 1302006 4026755133745 9.65
1188463 4026755431711 1.56 1302008 4026755389807 8.49
1188464 4026755431728 1.56 1302010 4026755389814 8.49
1188466 4026755431735 1.56
1188585 4026755390629 1.59 1340920 4026755431209 6.82
1189077 4026755435405 1.46 1340930 4026755423204 6.82
1189077 4026755435405 1.82 1340931 4026755423211 6.82
1189087 4026755432909 1.46 1340932 4026755423228 6.82
1189087 4026755432909 1.82 1340950 4026755423235 6.82
1189094 4026755418927 1.46 1340951 4026755423242 6.82
1189094 4026755418927 1.82 1340952 4026755423259 6.82
1189361 4026755231625 1.87 1341030 4026755358544 6.79
1189361 4026755231625 1.92 1341031 4026755358551 6.79
1189381 4026755217230 1.18 1341032 4026755358568 6.79
1189785 4026755390636 1.59 1341050 4026755384857 6.79
1341051 4026755384864 6.79
1190503 4026755232370 1.116 1341052 4026755384871 6.79
1190504 4026755232387 1.116 1341070 4026755371772 6.88
1190506 4026755232394 1.116 1341071 4026755413168 6.89
1190603 4026755232400 1.116 1341072 4026755435658 6.89
1190604 4026755232417 1.116 1341074* 4026755441109 6.89
1190606 4026755232424 1.116 1341080 4026755358445 6.86
1190654 1.116 1341081 4026755402506 6.92
1191503 4026755251678 1.116 1341082 4026755417043 6.86
1191504 4026755251685 1.116 1341083 4026755422818 6.86
1191506 4026755296457 1.116 1341084 4026755425437 6.86
20
20.a Indices
Article number

1341088* 4026755446630 6.90 1341360 4026755411843 6.84
1341089* 4026755446647 6.90 1341361 4026755411850 6.84
1341091 4026755410693 6.91 1341362 4026755411867 6.84
1341092 4026755410723 6.92 1341372 4026755430974 6.81
1341093 4026755412574 6.92 1341383 4026755407839 6.90
1341094 4026755419627 6.91 1341384 4026755407846 6.90
1341095 4026755358469 6.88 1341442 4026755412239 6.84
1341097 4026755422337 6.88 1341462 4026755412260 6.84
1341098 4026755424522 2.63 1341542 4026755412666 6.84
1341098 4026755424522 6.89 1341562 4026755412697 6.84
1341099 4026755428117 2.63 1341630* 4026755435436 6.116
1341099 4026755428117 6.89 1341631* 4026755435443 6.116
1341121 4026755398328 6.85 1341632* 4026755435450 6.116
1341130 4026755383140 6.83 1341642* 4026755435467 6.84
1341131 4026755383157 6.83 1341662 4026755435474 6.84
1341132 4026755383164 6.83 1341680* 4026755447903 6.116
1341140 4026755383171 6.83 1341681* 4026755447910 6.116
1341141 4026755383188 6.83 1341980 4026755430479 6.86
1341142 4026755383195 6.83 1341981 4026755430486 6.86
1341150 4026755394245 6.83 1342093 4026755422825 6.95
1341151 4026755394252 6.83 1343050 4026755336252 6.91
1341152 4026755394269 6.83 1343092 4026755422832 6.91
1341160 4026755394276 6.83 1344030* 4026755446890 6.93
1341161 4026755394283 6.83 1344031* 4026755446906 6.93
1341162 4026755394290 6.83 1344032* 4026755446913 6.93
1341170 4026755396607 6.88 1344050* 4026755446920 6.93
1341175 4026755396614 6.88 1344051* 4026755446937 6.93
1341177* 4026755435412 6.88 1344052* 4026755446944 6.93
1341180 4026755394306 6.86 1344480* 4026755447361 6.94
1341182 4026755398342 6.85 1344485* 4026755447378 6.94
1341183 4026755412710 6.86 1344490* 4026755447385 6.94
1341184 4026755412734 6.86 1344550* 4026755447392 6.93
1341185 4026755435429 6.86 1344555* 4026755447408 6.93
1341187 4026755396621 6.91 1349051 4026755384758 6.90
1341188* 4026755446654 6.90 1349052 4026755392180 6.90
1341189* 4026755443561 6.91 1349053 4026755408744 6.90
1341191 4026755417876 6.90 1349054 4026755413748 6.90
1341195 4026755397819 6.85 1349097* 4026755438642 6.91
1341195 4026755397819 6.88 1349098 4026755431575 6.91
1341196 4026755401974 6.85 1349099 4026755431483 6.91
1341197 4026755405040 6.88 1349980 4026755434385 6.91
1341198 4026755411577 6.89 1349981 4026755434392 6.91
1341199 4026755430462 2.63 1349982 4026755434408 6.91
1341199 4026755430462 6.89
1341220 4026755421002 6.80 1350106 4026755433036 6.120
1341231 4026755393552 6.80 1350108 4026755433043 6.120
1341251* 4026755431810 6.80 1350260 4026755407501 6.51
1341252 4026755392098 6.80 1350271 4026755363043 6.11
1341257 4026755400564 6.80 1350271 4026755363043 6.24
1341262 4026755399943 6.80 1350281 4026755133776 6.11
1341267 4026755431827 6.80 1350281 4026755133776 6.24
1341271 4026755399981 6.80 1350281 4026755133776 6.59
1341274 4026755405057 6.80 1350282 4026755133783 6.28
1341280 4026755392104 6.90 1350285 4026755336269 6.12
1341281 4026755392111 6.90 1350285 4026755336269 6.25
1341282 4026755392128 6.90 1350285 4026755336269 6.60
1341282 4026755392128 6.90 1350289 4026755283136 6.12
1341283 4026755407808 6.90 1350289 4026755283136 6.25
1341284 4026755407815 6.90 1350289 4026755283136 6.59
1341290 4026755392135 6.90 1350290 4026755425734 6.16
1341291 4026755392142 6.90 1350290 4026755425734 6.19
1341292 4026755392159 6.90 1350292 4026755391442 6.12
1341292 4026755392159 6.90 1350292 4026755391442 6.25
1341295 4026755399998 6.88 1350292 4026755391442 6.60
1341296 4026755424256 6.88 1350293 4026755371864 6.28
1341298* 4026755441116 2.63 1350294 4026755336276 6.12
1341299* 2.63 1350294 4026755336276 6.25
1341332 4026755411805 6.81 1350295 4026755336283 6.12
1341340 4026755411812 6.84 1350295 4026755336283 6.25
1341341 4026755411829 6.84 1350296 4026755336290 6.08
1341342 4026755411836 6.84 1350296 4026755336290 6.12
20
20.a Indices
Article number

1350296 4026755336290 6.25 1350958 4026755432992 6.35
1350296 4026755336290 6.28 1350958 4026755432992 6.37
1350296 4026755336290 6.31 1351062 4026755133868 6.123
1350296 4026755336290 6.59 1351072 4026755251531 6.123
1350297 4026755336306 6.08 1351095 4026755133882 6.67
1350297 4026755336306 6.12 1351096 4026755133899 6.68
1350297 4026755336306 6.25 1351394 4026755133981 6.67
1350297 4026755336306 6.28 1351396 4026755133998 6.68
1350297 4026755336306 6.59 1351470 4026755348422 6.62
1350299 4026755283150 6.12 1351471 4026755348439 6.62
1350299 4026755283150 6.25 1351472 4026755348446 6.62
1350435 4026755395396 6.66 1351482 4026755395464 6.62
1350436 4026755395402 6.66 1351483 4026755395471 6.62
1350443 4026755343823 6.58 1351568 4026755395488 6.64
1350444 4026755343830 6.58 1351569 4026755395495 6.64
1350445 4026755395419 6.66 1351571 4026755134018 6.62
1350446 4026755395426 6.66 1351582 4026755400861 6.62
1350447 4026755395433 6.66 1351583 4026755249514 6.62
1350448 4026755395440 6.66 1351584 4026755280777 6.62
1350449 4026755395457 6.66 1351585 4026755280784 6.62
1350450 4026755342369 6.67 1351586 4026755355574 6.62
1350451 4026755342376 6.67 1351587 4026755355581 6.62
1350455 4026755342383 6.67 1351588 4026755355598 6.62
1350456 4026755342390 6.67 1351589 4026755408010 6.65
1350457 4026755342406 6.67 1351590 4026755280791 6.65
1350465 4026755342413 6.67 1351591 4026755336429 6.65
1350466 4026755342420 6.67 1351592 4026755306484 6.62
1350467 4026755342437 6.67 1351593 4026755348453 6.62
1350470 4026755342444 6.68 1351596 4026755318074 6.44
1350471 4026755342451 6.68 1351596 4026755318074 9.27
1350474 4026755342468 6.68 1351597 4026755328547 6.44
1350474 4026755342468 9.32 1351598 4026755330663 6.44
1350475 4026755342475 6.68 1351598 4026755330663 6.54
1350475 4026755342475 9.32 1351651 4026755134025 6.66
1350476 4026755342482 6.68 1351652 4026755343137 6.66
1350476 4026755342482 9.32 1351654 4026755409246 6.66
1350477 4026755342499 6.68 1351655 4026755305401 6.66
1350477 4026755342499 9.32 1351657 4026755381580 6.66
1350480 4026755384451 6.68 1351658 4026755381597 6.66
1350481 4026755384468 6.68 1351672 4026755394986 6.63
1350490 4026755372137 6.58 1351673 4026755394993 6.63
1350594 4026755133820 6.67 1351674 4026755395006 6.63
1350951 4026755347210 6.08 1351675 4026755396638 6.63
1350951 4026755347210 6.12 1351682 4026755332667 6.62
1350951 4026755347210 6.16 1351683 4026755332674 6.62
1350951 4026755347210 6.19 1351684 4026755332681 6.62
1350951 4026755347210 6.25 1351685 4026755332698 6.62
1350951 4026755347210 6.28 1351690 4026755306491 6.11
1350951 4026755347210 6.31 1351690 4026755306491 6.28
1350951 4026755347210 6.59 1351690 4026755306491 6.35
1350952 4026755336313 6.08 1351690 4026755306491 6.37
1350952 4026755336313 6.12 1351690 4026755306491 6.43
1350952 4026755336313 6.16 1351690 4026755306491 6.51
1350952 4026755336313 6.19 1351690 4026755306491 6.52
1350952 4026755336313 6.25 1351690 4026755306491 8.53
1350952 4026755336313 6.28 1351691 4026755407860 6.24
1350952 4026755336313 6.31 1351691 4026755407860 6.43
1350952 4026755336313 6.59 1351691 4026755407860 6.51
1350953 4026755336320 6.08 1351691 4026755407860 6.55
1350953 4026755336320 6.12 1351691 4026755407860 6.59
1350953 4026755336320 6.16 1351692 4026755370027 6.63
1350953 4026755336320 6.19 1351693 4026755373035 6.63
1350953 4026755336320 6.25 1351694 4026755373042 6.63
1350953 4026755336320 6.28 1351695 4026755407518 6.63
1350953 4026755336320 6.31 1351696 4026755333169 6.44
1350953 4026755336320 6.59 1351696 4026755333169 9.27
1350954 4026755336337 6.11 1351697 4026755371529 6.63
1350954 4026755336337 6.24 1351698 4026755332704 6.64
1350955 4026755336344 6.28 1351699 4026755332711 6.64
1350956 4026755394160 6.35 1351701 4026755400755 6.08
1350956 4026755394160 6.37 1351702 4026755400762 6.08
20
20.a Indices
Article number

1351703 4026755400779 6.08 1354571 4026755383355 6.52
1351704 4026755400786 6.08 1354580 4026755396904 6.51
1351705 4026755400793 6.119 1354586 4026755383393 6.51
1351758 4026755396157 6.64 1354587 4026755406986 6.51
1351759 4026755396164 6.64 1354692 4026755401608 6.51
1351768 4026755371536 6.64 1354693 4026755400816 6.51
1351769 6.64 1354699 4026755370348 6.52
1351770 4026755411584 6.63 1354783 4026755407112 6.50
1351771 4026755411591 6.63 1354795 4026755407136 6.50
1351778 4026755371550 6.65 1354798 4026755407143 6.50
1351779 4026755371567 6.65 1355051 4026755387629 6.06
1351783 4026755407082 6.62 1355057 4026755387636 6.06
1351785 4026755407099 6.62 1355059 4026755387643 6.06
1351790 4026755358575 6.44 1355071 4026755249170 6.09
1351790 4026755358575 6.102 1355072 4026755249187 6.26
1351790 4026755358575 9.27 1355073 4026755343847 6.09
1351791 4026755358582 6.44 1355074 4026755343854 6.09
1351791 4026755358582 6.102 1355075 4026755381320 6.29
1351791 4026755358582 9.27 1355076 4026755383201 6.29
1351792 4026755358599 6.44 1355079 4026755383218 6.29
1351792 4026755358599 9.27 1355090 4026755263510 6.11
1351793 4026755369977 6.44 1355090 4026755263510 6.43
1351793 4026755369977 9.27 1355090 4026755263510 6.69
1352088* 4026755442250 6.68 1355091 4026755280845 6.69
1352088* 4026755442250 6.95 1355092 4026755280852 6.69
1352089* 4026755442267 6.68 1355158 4026755407525 6.74
1352089* 4026755442267 6.95 1355251 4026755387650 6.07
1352096 4026755258677 6.11 1355257 4026755387667 6.07
1352096 4026755258677 6.24 1355259 4026755387674 6.07
1352096 4026755258677 6.43 1355271 4026755249217 6.10
1352096 4026755258677 6.51 1355272 4026755249224 6.27
1352096 4026755258677 6.55 1355273 4026755343885 6.10
1352096 4026755258677 6.59 1355274 4026755343892 6.10
1352098 4026755382389 6.35 1355275 4026755381337 6.30
1352098 4026755382389 6.37 1355276 4026755383225 6.30
1352250 4026755429039 6.16 1355279 4026755383232 6.30
1352250 4026755429039 6.58 1355299* 4026755446494 6.31
1352258 4026755435184 6.16 1356020 4026755372564 6.21
1352258 4026755435184 6.60 1356050 4026755399608 6.58
1352259 4026755435191 6.16 1356077 4026755343984 6.21
1352259 4026755435191 6.60 1356079 4026755370225 6.21
1352272 4026755318944 6.43 1356090 4026755352139 6.69
1352273 4026755318951 6.24 1356091 4026755352146 6.69
1352273 4026755318951 6.43 1356092 4026755352153 6.69
1352274 4026755318968 6.28 1356093 4026755352160 6.69
1352275 4026755318975 6.11 1356097 4026755381344 6.43
1352276 4026755318982 6.24 1356097 4026755381344 6.59
1352296 4026755280814 6.11 1356097 4026755381344 6.69
1352297 4026755280821 6.55 1356098 4026755381351 6.24
1352298 4026755280838 6.28 1356098 4026755381351 6.43
1353181 4026755273830 6.11 1356098 4026755381351 6.69
1353181 4026755273830 6.43 1356220 4026755372199 6.22
1353390 4026755249347 6.11 1356223 4026755422528 6.22
1353390 4026755249347 6.24 1356250 4026755399615 6.58
1353391 4026755273311 6.28 1356277 4026755344028 6.22
1353391 4026755273311 6.31 1356279 4026755370232 6.22
1353583 4026755401424 6.119 1356420 4026755371208 6.23
1353584 4026755401431 6.119 1356872 4026755386769 6.54
1353771 4026755134339 6.43 1356972 4026755386776 6.54
1353771 4026755134339 6.55 1356989 4026755386783 6.54
1353771 4026755134339 6.59 1357020* 4026755438659 6.17
1354070* 4026755439267 6.42 1357027* 4026755438666 6.17
1354087 4026755385205 6.42 1357029* 4026755438673 6.17
1354097 4026755385212 6.42 1357070 4026755419009 6.13
1354165 4026755355604 6.41 1357072 4026755423471 6.13
1354171 4026755356878 6.41 1357073 4026755423488 6.13
1354270 4026755391459 6.41 1357086 4026755433050 6.16
1354272 4026755422511 6.41 1357087 4026755433067 6.16
1354274 4026755391466 6.41 1357088 4026755433074 6.16
1354276 4026755386271 6.41 1357088 4026755433074 6.20
1354570 4026755383348 6.52 1357089 4026755430516 6.15
20
20.a Indices
Article number

1357090 4026755430523 6.15 1359062 4026755318159 6.120
1357090 4026755430523 6.19 1359063 4026755318166 6.120
1357091 4026755430530 6.15 1359064 4026755318173 6.120
1357092 4026755430547 6.15 1359065 4026755318180 6.120
1357092 4026755430547 6.19 1359066 4026755318197 6.120
1357093 4026755430554 6.15 1359067 4026755318203 6.120
1357093 4026755430554 6.19 1359068 4026755318210 6.121
1357094 4026755430561 6.16 1359069 4026755318227 6.121
1357094 4026755430561 6.19 1359070 4026755318234 6.121
1357095 4026755430578 6.16 1359071 4026755318241 6.121
1357095 4026755430578 6.20 1359072 4026755318258 6.121
1357096 4026755430585 6.15 1359073 4026755352801 6.121
1357097 4026755430592 6.15 1359080 4026755318265 6.121
1357097 4026755430592 6.19 1359081 4026755318272 6.121
1357098 4026755430608 6.15 1359085 4026755318289 6.121
1357098 4026755430608 6.19 1359086 4026755437614 6.121
1357098 4026755430608 6.31 1359090 4026755318296 6.122
1357099 4026755430615 6.15 1359091 4026755318302 6.108
1357099 4026755430615 6.19 1359091 4026755318302 6.122
1357099 4026755430615 6.31 1359094 4026755328554 6.122
1357153 4026755407532 6.74 1359095 4026755318319 6.122
1357154 4026755407549 6.74 1359096 4026755318326 6.122
1357157 4026755344080 6.74 1359097 4026755318333 6.122
1357159 4026755383249 6.42 1359098 4026755318340 6.122
1357159 4026755383249 6.74 1359099 4026755318357 6.67
1357160 4026755383256 6.42 1359101 4026755318364 6.122
1357160 4026755383256 6.74 1359102 4026755318388 6.122
1357161* 4026755395150 6.74 1359103 4026755318395 6.122
1357220* 4026755438680 6.18 1359104 4026755318401 6.122
1357227* 4026755438697 6.18 1359105 4026755318418 6.122
1357229* 4026755438703 6.18 1359551 4026755318463 6.68
1357270 4026755419016 6.14 1359552 4026755318470 6.68
1357272 4026755423495 6.14 1359553 4026755359077 6.68
1357273 4026755423501 6.14 1359554 4026755375688 6.68
1357290 4026755423792 6.16 1359591 4026755359114 6.44
1357290 4026755423792 6.19 1359591 4026755359114 9.27
1357290 4026755423792 6.71 1359592 4026755359121 6.44
1357291* 4026755440645 6.95 1359592 4026755359121 9.27
1357292* 4026755446500 6.95
1358149* 4026755434781 9.37 1360033 4026755422849 9.07
1358150 4026755381955 6.74 1360063 4026755422856 9.08
1358155 4026755344103 6.74 1360394 4026755420463 9.11
1358157 4026755370690 6.74 1360394 4026755420463 12.46
1358161 4026755358605 6.74 1360556 4026755422863 9.09
1358162 4026755358612 6.74 1360557 4026755422870 9.09
1358163 4026755407556 6.74 1360558 4026755422887 9.09
1358164 4026755407563 6.74 1360573 4026755422894 9.07
1358165 4026755431506 6.31 1360580 4026755355901 9.36
1358165 4026755431506 6.74 1360588 4026755431216 9.36
1358170* 4026755434798 6.74 1360589* 4026755447835 9.36
1358171* 4026755434804 6.74 1360851 4026755391497 9.14
1358180* 4026755434811 9.37 1360852 4026755422900 9.14
1358240 4026755379136 6.34 1360853 4026755422917 9.14
1358251 4026755355710 6.34 1360854 4026755427448 9.14
1358252 4026755414134 6.34 1360862 4026755430905 9.15
1358340 4026755379143 6.35 1360864 4026755427455 9.15
1358351 4026755355734 6.35 1361011 4026755373486 9.56
1358352 4026755414141 6.35 1361012 4026755373493 9.56
1358540 4026755379150 6.36 1361013 4026755373509 9.56
1358551 4026755371970 6.36 1361050 4026755401981 9.19
1358552 4026755414158 6.36 1361050 4026755401981 12.47
1358640 4026755379167 6.37 1361060 4026755401998 9.19
1358651 4026755371994 6.37 1361060 4026755401998 12.47
1358652 4026755414165 6.37 1361092 4026755413236 9.35
1359040 4026755337266 6.122 1361098 4026755349153 6.08
1359041 4026755337273 6.121 1361098 4026755349153 6.12
1359042 4026755337280 6.121 1361098 4026755349153 6.16
1359043 4026755352795 6.120 1361098 4026755349153 6.19
1359050 4026755317350 6.120 1361098 4026755349153 6.25
1359060 4026755318135 6.120 1361098 4026755349153 6.28
1359061 4026755318142 6.120 1361098 4026755349153 6.31
20
20.a Indices
Article number

1361098 4026755349153 6.59 1361672 4026755359152 9.58
1361228 4026755406993 9.48 1361680 4026755359169 9.59
1361229 4026755407006 9.48 1361681 4026755359176 9.59
1361230 4026755346831 9.40 1361690 4026755350883 9.42
1361231 4026755346848 9.40 1361691 4026755350890 9.42
1361246 4026755373516 9.58 1361694 4026755379822 9.60
1361248 4026755389302 9.49 1362063 4026755417012 9.08
1361249 4026755373523 9.49 1362064 4026755422924 9.08
1361250 4026755366419 9.49 1363051 4026755166286 9.33
1361251 4026755366426 9.49 1364140 4026755369922 9.33
1361252 4026755405231 9.49 1364149 4026755200249 9.34
1361253 4026755405248 9.49 1364151 4026755200263 9.34
1361254 4026755366433 9.49 1364160 4026755280869 9.34
1361255 4026755366440 9.49 1364161 4026755280876 9.34
1361256 4026755366457 9.49 1364162 4026755281651 9.34
1361257 4026755366464 9.49 1364163 4026755372571 9.34
1361258 4026755366471 9.49 1364170 4026755365054 9.34
1361259 4026755366488 9.49 1364185 4026755370034 9.56
1361260 4026755350739 9.41 1364185 4026755370034 10.11
1361262 4026755350753 9.41 1364186 4026755370041 9.33
1361264 4026755356007 9.41 1364187 4026755430271 9.35
1361266 4026755405132 9.41 1364188 4026755430288 9.35
1361270 4026755364439 9.41 1364189 4026755430295 9.35
1361271 4026755364446 9.41 1364190 4026755283570 9.34
1361275 4026755364453 9.41 1364191 4026755330687 9.34
1361276 4026755364460 9.41 1364192 4026755430301 9.33
1361278 4026755385533 9.41 1364193 4026755430318 9.34
1361279 4026755379174 9.59 1364194 4026755430325 9.34
1361283 4026755400328 9.48 1364195 4026755319897 9.35
1361284 4026755400335 9.48 1364196 4026755319903 9.35
1361288 4026755400342 9.44 1364197 4026755319910 9.33
1361289 4026755366365 9.45 1364198 4026755344141 9.35
1361290 4026755363623 9.42 1364199 4026755343533 9.33
1361295 4026755364026 9.58 1364240 4026755393743 9.42
1361340 4026755416923 9.43 1364247 4026755347388 9.33
1361345 4026755416930 9.43 1364248 4026755387469 10.09
1361380 4026755416947 9.44 1364250 4026755305470 9.33
1361381 4026755416954 9.44 1364260 4026755332179 9.34
1361385 4026755416961 9.44 1364290 4026755318487 9.33
1361387 4026755385557 9.45 1365020 9.52
1361388 4026755417050 9.45 1365040 4026755358650 9.52
1361389 4026755417067 9.45 1365050 4026755358667 9.52
1361391 4026755416978 9.45 1365060 4026755358674 9.52
1361392 4026755416985 9.45 1365520 9.53
1361393 4026755416992 9.45 1365540 4026755372229 9.53
1361394 4026755417005 9.45 1365550 4026755372236 9.53
1361421 4026755350777 9.56 1365560 4026755372243 9.53
1361421 4026755350777 10.11 1366020 9.54
1361422 4026755350784 9.56 1366040 4026755386387 9.54
1361422 4026755350784 10.11 1366050 4026755386394 9.54
1361423 4026755350791 9.56 1366060 4026755386400 9.54
1361423 4026755350791 10.11 1366597 4026755420470 9.10
1361424 4026755350807 9.56 1366597 4026755420470 12.46
1361425 4026755350814 9.56 1367251 4026755318524 9.36
1361440 4026755415148 9.43 1367258 4026755431223 9.36
1361448 4026755415247 9.50 1367259* 4026755447842 9.36
1361480 4026755415155 9.44 1367393 4026755371628 9.31
1361481 4026755415261 9.44 1367395 4026755371635 9.31
1361486 4026755415278 9.47 1367396 4026755371642 9.31
1361487 4026755415285 9.47 1367397 4026755371659 9.31
1361488 4026755415292 9.50 1367465 4026755332735 6.106
1361489 4026755415308 9.50 1367465 4026755332735 9.32
1361622 4026755350838 9.58 1367468 4026755332742 6.106
1361623 4026755362329 9.60 1367468 4026755332742 9.32
1361625 4026755379181 9.42 1367573 4026755386455 9.31
1361651 4026755350845 9.58 1367575 4026755386462 9.31
1361652 4026755350852 9.58 1367576 4026755386479 9.31
1361653 4026755350869 9.58 1367577 4026755386486 9.31
1361654 4026755350876 9.58 1367579 4026755386493 9.31
1361655 4026755352399 9.58 1367583 4026755386509 9.31
1361671 4026755359145 9.58 1367585 4026755386516 9.31
20
20.a Indices
Article number

1367586 4026755386523 9.31 1381043 4026755418330 6.111
1367587 4026755386530 9.31 1381044 4026755417395 6.111
1367589 4026755386547 9.31 1381045 4026755406931 6.111
1367593 4026755386554 9.31 1381046 4026755406948 6.111
1367595 4026755386561 9.31 1381047 4026755391268 6.111
1367596 4026755386578 9.31 1381047 4026755391268 10.09
1367597 4026755386585 9.31 1381048 4026755415315 6.111
1367599 4026755386592 9.31 1381049 4026755391275 6.111
1368064 4026755422931 9.13 1381049 4026755391275 10.09
1368163 4026755422948 9.12 1381066 4026755396645 6.106
1368251 4026755394320 9.16 1381068 4026755400403 6.102
1369008 4026755417029 9.36 1381078 4026755429046 6.106
1369050 4026755363135 3.32 1381078 4026755429046 6.107
1369050 4026755363135 9.30 1381080 4026755395310 6.105
1369051 4026755225259 9.56 1381082 4026755356915 6.103
1369051 4026755225259 10.11 1381083 4026755356922 6.103
1369055 4026755371222 3.32 1381084 4026755356939 6.103
1369055 4026755371222 9.30 1381088 4026755381368 6.105
1369062 4026755399288 3.32 1381089 4026755380408 6.105
1369062 4026755399288 9.30 1381090 4026755366938 6.104
1369065 4026755399295 3.32 1381091 4026755366945 6.104
1369065 4026755399295 9.30 1381092 4026755366969 6.104
1369076 4026755364279 9.59 1381093 4026755366976 6.104
1369078 4026755364286 9.59 1381094 4026755366983 6.105
1369080 4026755330847 9.32 1381095 4026755366990 6.105
1369081 4026755330854 9.32 1381096 4026755367003 6.105
1369083 4026755367119 9.60 1381097 4026755367010 6.105
1369084 4026755367126 9.60 1381099 4026755367270 6.104
1369085 4026755330861 9.32 1381185 4026755409406 6.102
1369085 4026755330861 9.60 1381185 4026755409406 10.20
1369086 4026755364293 9.33 1381191 4026755430622 6.106
1369086 4026755364293 9.60 1381192 4026755430639 6.106
1369089 4026755350906 9.32 1381193 4026755430646 6.106
1369090 4026755315936 9.32 1381194 4026755430653 6.106
1369093 4026755331004 6.74 1381199 4026755431742 6.106
1369093 4026755331004 8.53 1381580 4026755419634 6.107
1369093 4026755331004 9.26 1381581* 4026755434422 6.107
1369093 4026755331004 10.11 1381585* 4026755439670 6.108
1369094 4026755331011 6.74 1381587* 4026755439694 6.108
1369094 4026755331011 9.26 1381590 4026755422955 6.107
1369094 4026755331011 10.11 1381591 4026755434439 6.107
1369095 4026755418323 6.74 1381592 4026755434446 6.108
1369095 4026755418323 8.57 1381595* 4026755438895 6.109
1369096 4026755364316 9.59 1381596* 4026755438901 6.109
1369098 4026755364323 9.59 1381597* 4026755438918 6.109
1369531 4026755400144 9.25 1381599* 4026755443349 6.109
1369532 4026755417647 9.25 1383460 4026755400571 10.08
1369532 4026755417647 9.36 1383465 4026755400588 10.08
1369549 4026755420487 9.25 1383480 4026755413199 10.08
1369551 4026755420494 9.25 1383485 4026755413205 10.08
1369553 4026755435054 9.26 1383550 4026755401813 10.07
1369555 4026755396379 9.26 1383555 4026755401820 10.07
1369591 4026755344189 9.26 1383562 4026755394917 10.07
1383567 4026755394924 10.07
1371000* 4026755440812 10.15 1383575 4026755402025 10.09
1371090* 4026755447859 10.15 1383580 4026755396317 10.09
1371091* 4026755447866 10.15 1383581 4026755396324 10.09
1383582 4026755418347 6.111
1381025 4026755415742 6.101 1383583 4026755427097 6.103
1381025 4026755415742 12.48 1383583 4026755427097 6.106
1381027 4026755415759 6.101 1383583 4026755427097 10.10
1381027 4026755415759 12.48 1383590 4026755406955 10.11
1381030 4026755400878 6.100 1383590 4026755406955 10.20
1381030 4026755400878 12.48 1383591 4026755406962 10.11
1381032 4026755400885 6.100 1383591 4026755406962 10.20
1381032 4026755400885 12.48 1383592 4026755410518 10.12
1381035 4026755400892 6.100 1383592 4026755410518 10.20
1381035 4026755400892 12.48 1383593 4026755412826 10.12
1381037 4026755400908 6.100 1383593 4026755412826 10.20
1381037 4026755400908 12.48 1383594 4026755429763 10.11
1381042 4026755400397 6.110 1383594 4026755429763 10.20
20
20.a Indices
Article number

1383645 4026755422535 10.07 1400460 4026755359190 11.10
1383646 4026755435481 10.07 1400461 4026755359206 11.10
1385008 4026755373240 10.18 1400554 4026755134513 2.76
1385010 4026755352498 10.18 1400560 4026755359213 2.49
1385015 4026755352504 10.18 1400560 4026755359213 2.87
1385105 4026755352528 10.18 1400560 4026755359213 11.10
1385107 4026755352535 10.18 1400562 4026755360493 2.49
1385110 4026755352542 10.18 1400562 4026755360493 2.87
1385303 4026755365597 10.18 1400562 4026755360493 11.10
1385305 4026755365603 10.18 1400563 4026755366372 2.49
1387006* 4026755435498 10.18 1400563 4026755366372 2.87
1387106 4026755435504 10.18 1400563 4026755366372 11.10
1387303 4026755420876 10.18 1400652 4026755134520 2.76
1387505 4026755420883 10.18 1400653 4026755134537 2.76
1387506 4026755435511 10.18 1400654 4026755134544 2.76
1387606 4026755435528 10.18 1400660 4026755359220 2.87
1389001 4026755382211 10.09 1400660 4026755359220 11.10
1389001 4026755382211 10.20 1400691 4026755134551 2.76
1389008 4026755413250 6.104 1400692 4026755134568 2.77
1389008 4026755413250 9.36 1400692 4026755134568 11.36
1389050 4026755391282 6.105 1400693 4026755134575 2.77
1389051 4026755391299 6.105 1400980 4026755435016 2.38
1389052 4026755426861 6.105 1400981 4026755435023 2.38
1389082 4026755401448 6.103 1400981 4026755435023 6.97
1389085* 4026755413403 6.103 1400982 4026755435030 2.38
1389090 4026755389166 6.102 1401061 4026755134681 2.76
1389090 4026755389166 10.20 1401091 4026755134698 1.133
1389095 4026755419412 6.104 1401091 4026755134698 2.77
1389901 4026755413267 6.104 1401091 4026755134698 11.42
1389902 4026755414608 6.104 1401151 4026755369366 1.133
1401151 4026755369366 2.62
1391025 4026755424201 7.08 1401152 4026755369427 1.133
1391035* 4026755449761 7.08 1401152 4026755369427 2.62
1394010* 4026755449778 7.08 1401153 4026755369434 1.133
1394015* 4026755449785 7.08 1401153 4026755369434 2.62
1394020* 4026755449792 7.09 1401154 4026755369441 1.133
1394021* 4026755449808 7.09 1401154 4026755369441 2.62
1394022* 4026755449815 7.09 1401171 4026755369571 2.62
1394023* 4026755449822 7.09 1401172 4026755369588 2.62
1394090* 4026755449839 7.09 1401173 4026755369595 2.62
1394091* 4026755449846 7.09 1401174 4026755369601 2.62
1395010 4026755424218 7.09 1401190 4026755367737 2.63
1399090 4026755424232 7.08 1401191 4026755395297 2.63
1399091 4026755424249 7.09 1401194 4026755134704 2.76
1399092 4026755438321 7.09 1401704 4026755134735 2.77
1399095* 4026755449853 7.08 1401952 4026755395532 2.43
1401990 4026755395549 2.43
1400051 4026755278361 2.49 1402010 4026755342796 2.43
1400051 4026755278361 11.10 1402052 4026755371239 2.50
1400052 4026755278378 2.49 1402052 4026755371239 11.10
1400052 4026755278378 11.10 1402054 4026755371246 2.50
1400054 4026755333596 2.49 1402054 4026755371246 11.10
1400054 4026755333596 11.10 1402090 4026755279078 2.47
1400151 4026755278385 2.49 1402091 4026755279085 2.47
1400151 4026755278385 11.10 1402092 4026755286953 2.47
1400152 4026755278392 2.49 1402096 4026755307979 2.50
1400152 4026755278392 11.10 1402098 4026755384734 2.50
1400154 4026755296983 2.49 1402099 4026755384741 2.50
1400154 4026755296983 11.10 1402110 4026755335064 2.40
1400164 4026755188158 2.76 1402130* 4026755446661 2.42
1400251 4026755280609 2.49 1402152 4026755371253 2.50
1400251 4026755280609 2.86 1402152 4026755371253 11.10
1400252 4026755280616 2.49 1402154 4026755371260 2.50
1400252 4026755280616 2.86 1402154 4026755371260 11.10
1400254 4026755338591 2.49 1402191 4026755422207 2.47
1400254 4026755338591 2.86 1402210 4026755335071 2.40
1400352 4026755303001 2.49 1402252 4026755371277 2.50
1400352 4026755303001 2.87 1402254 4026755371284 2.50
1400354 4026755303018 2.49 1402290 4026755300024 2.40
1400354 4026755303018 2.87 1402310 4026755335088 2.40
1400392 4026755134490 2.76 1402330* 4026755446685 2.42
20
20.a Indices
Article number

1402352 4026755380163 2.50 1405362 4026755437751 2.58
1402390 4026755300031 2.40 1405452 4026755437768 2.59
1402391 4026755338607 2.41 1405453 4026755437775 2.59
1402392 4026755338614 2.41 1405454 4026755437782 2.59
1402393* 4026755446692 2.42 1405455 4026755437799 2.59
1402394* 4026755446708 2.42 1405456 4026755437805 2.59
1402410 4026755416831 2.40 1405457 4026755437812 2.59
1402430* 4026755446715 2.42 1405458 4026755437829 2.59
1402490 4026755418187 2.40 1405459 4026755437836 2.59
1402500 4026755306538 2.44 1405460 4026755437843 2.59
1402505 4026755328813 2.44 1405461 4026755437850 2.59
1402507 4026755336351 2.44 1405462 4026755437867 2.59
1402510 4026755328820 2.44 1405552 4026755437874 2.58
1402515 4026755336368 2.44 1405552 4026755437874 2.86
1402520 4026755412192 2.44 1405553 4026755437881 2.58
1402580 4026755306545 2.45 1405553 4026755437881 2.86
1402581 4026755306552 2.45 1405554 4026755437898 2.58
1402591 4026755306569 2.44 1405554 4026755437898 2.86
1402592 4026755306576 2.44 1405555 4026755437904 2.58
1402594* 4026755446951 2.45 1405555 4026755437904 2.86
1402596* 4026755443288 2.45 1405556 4026755437911 2.58
1402597 4026755306583 2.44 1405556 4026755437911 2.86
1402598 4026755306590 2.45 1405557 4026755437928 2.58
1402599 4026755306606 2.45 1405557 4026755437928 2.86
1402600 4026755306613 2.44 1405558 4026755437935 2.58
1402605 4026755424409 2.44 1405558 4026755437935 2.86
1402607 4026755424416 2.44 1405559 4026755437942 2.58
1402610 4026755424423 2.44 1405559 4026755437942 2.86
1402620 4026755424430 2.44 1405560 4026755437959 2.58
1402800 4026755306620 2.46 1405560 4026755437959 2.86
1402850 4026755306637 2.46 1405561 4026755437966 2.58
1402855 4026755306644 2.46 1405561 4026755437966 2.86
1402857 4026755306651 2.46 1405562 4026755437973 2.58
1402891 4026755306668 2.46 1405562 4026755437973 2.86
1402895 4026755306675 2.46 1406152* 4026755439465 2.54
1404091 4026755395327 2.61 1406153* 4026755439472 2.54
1404092 4026755438932 2.61 1406154* 4026755439489 2.54
1404095 4026755277104 2.77 1406155* 4026755439496 2.54
1404578 4026755350371 2.64 1406156* 4026755439502 2.54
1404579 4026755350401 2.64 1406157* 4026755439519 2.54
1404580 4026755288834 2.64 1406158* 4026755439526 2.54
1404581 4026755288841 2.64 1406159* 4026755439533 2.54
1404680 4026755288858 2.64 1406160* 4026755439540 2.54
1404681 4026755288865 2.64 1406161* 4026755439557 2.54
1404752 4026755423587 2.56 1406162* 4026755439564 2.54
1404753 4026755423594 2.56 1406383 4026755249873 1.132
1404754 4026755423600 2.56 1406383 4026755249873 2.61
1404755 4026755423617 2.56 1406384 4026755249880 1.132
1404756 4026755423624 2.56 1406384 4026755249880 2.61
1404757 4026755423631 2.56 1406394 4026755134971 2.76
1404758 4026755423648 2.56 1406483 4026755360615 1.132
1404759 4026755423655 2.56 1406483 4026755360615 2.61
1404760 4026755423662 2.56 1406484 4026755360622 1.132
1404761 4026755423679 2.56 1406484 4026755360622 2.61
1404762 4026755423686 2.56 1406504 4026755343144 1.132
1404780 4026755329926 2.65 1406504 4026755343144 2.61
1404790 4026755342802 2.65 1406583 4026755360646 1.132
1404880 4026755350579 2.64 1406583 4026755360646 2.61
1404881 4026755350586 2.64 1406584 4026755360653 1.132
1404882* 4026755388169 2.64 1406584 4026755360653 2.61
1404883* 4026755388176 2.64 1406586 4026755379587 2.60
1405352 4026755437652 2.58 1406586 4026755379587 2.88
1405353 4026755437669 2.58 1406708 4026755172409 1.132
1405354 4026755437676 2.58 1406708 4026755172409 2.61
1405355 4026755437683 2.58 1407152 4026755437980 1.132
1405356 4026755437690 2.58 1407153 4026755437997 1.132
1405357 4026755437706 2.58 1407154 4026755438000 1.132
1405358 4026755437713 2.58 1407155 4026755438017 1.132
1405359 4026755437720 2.58 1407156 4026755438024 1.132
1405360 4026755437737 2.58 1407157 4026755438031 1.132
1405361 4026755437744 2.58 1407158 4026755438048 1.132
20
20.a Indices
Article number

1407159 4026755438055 1.132 1503152 4026755135176 11.32
1407160 4026755438062 1.132 1503155 4026755135183 11.32
1407161 4026755438079 1.132 1503156 4026755135190 11.32
1407162 4026755438086 1.132 1503157 4026755135206 11.32
1407206 4026755278712 2.61 1503161 4026755135213 11.32
1408652* 4026755419061 1.133 1503162 4026755135220 11.32
1408653* 4026755419078 1.133 1503164 4026755135237 11.32
1408654* 4026755419085 1.133 1504054 4026755135244 2.52
1408655* 4026755419092 1.133 1504054 4026755135244 11.33
1409082 4026755299182 2.41 1504055 4026755135251 11.33
1409085 4026755279115 2.47 1504056 4026755135268 11.33
1409086 4026755431759 2.47 1504064 4026755135275 11.33
1409087 4026755431766 2.47 1504065 4026755135282 11.33
1409090 4026755279122 2.47 1504066 4026755135299 11.33
1409095 4026755385847 2.48 1504153 4026755135305 11.33
1409999 4026755283921 2.47 1504154 4026755135312 11.33
1504155 4026755135329 11.33
1410151* 4026755436419 11.46 1504156 4026755135336 11.33
1410461* 4026755436556 11.46 1504353 4026755135343 11.34
1410560* 4026755436426 11.46 1504354 4026755135350 11.34
1410660* 4026755436433 11.46 1504354 4026755135350 11.36
1414452 4026755373141 2.59 1504355 4026755135367 11.34
1414452 4026755373141 2.87 1504356 4026755135374 11.34
1414453 4026755373158 2.59 1504363 4026755170177 11.34
1414453 4026755373158 2.87 1504454 4026755135381 11.34
1414454 4026755373165 2.59 1504455 4026755135398 11.34
1414454 4026755373165 2.87 1504456 4026755135404 11.34
1414455 4026755373172 2.59 1504552 4026755135411 11.33
1414455 4026755373172 2.87 1504553 4026755135428 11.33
1414456 4026755373257 2.59 1504554 4026755135435 11.33
1414456 4026755373257 2.87 1504555 4026755135442 11.33
1414490 4026755371789 2.60 1504556 4026755135459 11.33
1414490 4026755371789 2.87 1504563 4026755135466 11.33
1414493 4026755384024 2.60 1504564 4026755135473 11.33
1414493 4026755384024 2.87 1504565 4026755135480 11.33
1504566 4026755135497 11.33
1500154 4026755134988 11.08 1504567 4026755135503 11.33
1500155 4026755172430 11.08 1504568 4026755135510 11.33
1500158 4026755251784 11.08 1504569 4026755135527 11.33
1500160 4026755225266 11.08 1504570 4026755135534 11.33
1500254 4026755135008 11.08 1504571 4026755135541 11.33
1500255 4026755172447 11.08 1504572 4026755135558 11.33
1500555 4026755310610 11.08 1504573 4026755135565 11.33
1501054 4026755135039 11.08 1504574 4026755135572 11.33
1501055 4026755172423 11.08 1504575 4026755135589 11.33
1501060 4026755135053 11.08 1504754 4026755164039 11.33
1501066 4026755135060 11.08 1505565 4026755178319 11.34
1501072 4026755234701 11.08 1505566 4026755178326 11.34
1501155 4026755217742 11.08 1505567 4026755178333 11.34
1501160 4026755217759 11.08 1506053 4026755135596 11.35
1501184 4026755135077 2.47 1506054 4026755135602 11.35
1501184 4026755135077 11.38 1506073 4026755135619 11.35
1501254 4026755238365 11.08 1506075 4026755135626 11.35
1501255 4026755238372 11.08 1506085 4026755276015 11.17
1501260 4026755238389 11.08 1506087 4026755276022 11.17
1501355 4026755291575 11.08 1506088 4026755348859 11.17
1501360 4026755291582 11.08 1506089 4026755390643 11.17
1501455 4026755291599 11.08 1506092 4026755135633 11.20
1501460 4026755291605 11.08 1506092 4026755135633 11.35
1501555 4026755172454 11.09 1506093 4026755166149 11.20
1501560 4026755135091 11.09 1506093 4026755166149 11.35
1501566 4026755135107 11.09 1506153 4026755135640 11.35
1501572 4026755135114 11.09 1506176 4026755332186 11.35
1501580 4026755205503 11.09 1506177 4026755332193 11.35
1501582 4026755246841 11.09 1506178 4026755135657 11.35
1501584 4026755255874 11.09 1506253 4026755135664 11.35
1503053 4026755135121 11.32 1506553 4026755135671 11.35
1503054 4026755135138 11.32 1506653 4026755219043 11.35
1503055 4026755135145 11.32 1507354 4026755135688 11.32
1503056 4026755135152 11.32 1507355 4026755192162 11.32
1503151 4026755135169 11.32 1507854 4026755342819 1.91
20
20.a Indices
Article number

1507855 4026755342826 1.91 1512049 4026755245332 11.12
1507934 4026755135725 1.143 1512051 4026755204414 11.12
1507934 4026755135725 2.52 1512054 4026755204421 11.12
1507935 4026755192179 1.143 1512056 4026755246858 11.12
1507935 4026755192179 2.52 1512057 4026755255881 11.12
1507937 4026755349214 1.143 1512062 4026755269741 11.17
1507937 4026755349214 2.52 1512063 4026755181937 11.17
1507937 4026755349214 2.86 1512065 4026755182255 11.17
1507938 4026755254266 1.143 1512141 4026755329032 11.12
1507938 4026755254266 2.52 1512143 4026755188264 11.12
1507939 4026755288773 1.143 1512144 4026755337648 11.12
1507939 4026755288773 2.52 1512145 4026755188271 11.12
1507940 4026755135749 1.143 1512146 4026755311754 11.12
1507940 4026755135749 2.52 1512147 4026755217476 11.12
1507954 4026755135787 2.51 1512148 4026755359725 11.12
1507954 4026755135787 11.32 1512149 4026755217483 11.12
1507955 4026755172461 2.51 1512151 4026755217490 11.12
1507955 4026755172461 11.32 1512156 4026755276336 11.12
1507958 4026755253313 11.32 1512157 4026755276343 11.12
1507959 4026755349221 2.51 1512163 4026755188288 11.17
1507960 4026755135800 11.32 1512165 4026755188295 11.17
1507969 4026755379594 2.60 1512171 4026755229721 11.17
1507969 4026755379594 2.87 1512172 4026755269512 11.17
1507974 4026755135817 2.51 1512243 4026755188301 11.12
1507974 4026755135817 11.32 1512245 4026755188318 11.12
1507975 4026755172478 2.51 1512246 4026755245349 11.12
1507975 4026755172478 11.32 1512247 4026755216189 11.12
1507979 4026755379600 2.60 1512248 4026755248982 11.12
1507979 4026755379600 2.87 1512249 4026755216196 11.12
1507980 4026755135831 11.32 1512252 4026755216202 11.12
1507983 4026755135848 11.32 1512256 4026755276350 11.12
1507985 4026755135855 11.32 1512257 4026755276367 11.12
1509091 4026755135862 11.38 1512343 4026755188325 11.14
1509092 4026755135879 11.38 1512344 4026755314663 11.14
1509093 4026755135886 11.38 1512345 4026755188332 11.14
1509151 4026755135893 11.38 1512346 4026755225617 11.14
1509152 4026755135909 11.38 1512347 4026755218053 11.14
1509153 4026755135916 11.38 1512348 4026755218060 11.14
1509561 4026755135992 11.41 1512349 4026755218077 11.14
1509562 4026755136005 11.41 1512357 4026755248999 11.14
1509563 4026755136012 11.41 1512358 4026755314670 11.14
1509567 4026755262544 11.40 1512443 4026755188349 11.14
1509568 4026755262551 11.40 1512445 4026755188356 11.14
1509569 4026755262568 11.40 1512446 4026755245356 11.14
1509570 4026755188165 11.40 1512447 4026755218084 11.14
1509571 4026755188172 11.40 1512448 4026755223569 11.14
1509573 4026755188196 11.40 1512449 4026755218091 11.14
1509574 4026755188202 11.40 1512456 4026755276374 11.14
1509575 4026755188219 11.40 1512541 4026755434149 2.52
1509580 4026755170184 11.40 1512542 4026755329933 2.52
1509580 4026755170184 11.51 1512543 4026755181951 2.52
1509585 4026755172799 11.42 1512543 4026755181951 11.12
1509586 4026755172805 11.42 1512544 4026755347418 2.52
1509588 4026755170191 11.40 1512545 4026755181968 2.52
1509588 4026755170191 11.51 1512545 4026755181968 11.12
1509589 4026755263527 11.40 1512546 4026755204438 11.12
1509591 4026755136036 11.42 1512547 4026755204445 11.12
1509593 4026755264159 11.40 1512548 4026755204452 11.12
1509594 4026755188226 11.40 1512549 4026755246865 11.12
1509596 4026755219463 11.40 1512550 4026755256130 11.12
1509661 4026755136067 11.38 1512655 4026755188363 11.13
1509662 4026755136074 11.38 1512656 4026755224702 11.13
1512657 4026755216219 11.13
1511946 4026755353471 6.67 1512659 4026755224719 11.13
1511949 4026755353488 6.67 1512660 4026755216226 11.13
1512043 4026755188233 11.12 1512662 4026755246872 11.13
1512044 4026755314366 11.12 1512663 4026755246889 11.13
1512045 4026755188240 11.12 1512664 4026755216233 11.13
1512046 4026755188257 11.12 1512665 4026755246896 11.13
1512047 4026755314373 11.12 1512666 4026755302110 11.13
1512048 4026755204407 11.12 1512668 4026755256154 11.13
2017 20.39
20
20.a Indices
Article number

1512669 4026755256161 11.13 1515144 4026755411522 11.17
1512745 4026755228397 11.14 1515146 4026755268966 11.17
1512747 4026755228403 11.14 1515153 4026755407570 2.15
1512751 4026755329049 11.14 1515156 4026755407587 2.15
1512752 4026755329056 11.14 1515243 4026755268973 11.18
1512753 4026755329063 11.14 1515244 4026755411539 11.18
1512755 4026755329070 11.14 1515290 4026755269987 11.18
1512757 4026755329087 11.14 1515353 4026755407594 2.15
1512843 4026755188370 11.14 1515356 4026755407600 2.15
1512845 4026755188387 11.14 1517043 4026755188462 11.19
1512847 4026755216097 11.14 1517045 4026755188479 11.19
1512849 4026755216103 11.14 1517053 4026755223323 11.19
1512851 4026755216110 11.14 1517055 4026755223330 11.19
1512852 4026755246902 11.14 1517056 4026755252194 11.19
1512853 4026755255904 11.14 1517143 4026755188486 11.19
1512949 4026755216127 11.14 1517145 4026755188493 11.19
1512951 4026755216134 11.14 1517243 4026755188509 11.19
1512952 4026755246919 11.14 1517245 4026755188516 11.19
1512953 4026755255911 11.14 1517253 4026755288780 11.19
1513043 4026755188394 11.15 1517255 4026755288797 11.19
1513045 4026755188400 11.15 1517343 4026755188523 11.19
1513046 4026755204469 11.15 1517345 4026755188530 11.19
1513047 4026755204476 11.15 1517443 4026755206203 11.19
1513048 4026755204483 11.15 1517643 4026755253320 11.19
1513049 4026755246926 11.15 1517645 4026755228427 11.19
1513050 4026755255928 11.15 1518070 4026755200300 11.19
1513155 4026755188417 11.15 1518070 4026755200300 11.26
1513156 4026755228410 11.15 1518074 4026755304268 11.19
1513157 4026755218107 11.15 1518074 4026755304268 11.26
1513158 4026755228014 11.15 1518183 4026755314380 11.20
1513159 4026755228021 11.15 1518184 4026755188547 11.20
1513160 4026755218114 11.15 1518185 4026755188554 11.20
1513162 4026755218121 11.15 1518186 4026755188561 11.20
1513163 4026755218138 11.15 1518187 4026755223132 11.20
1513164 4026755225624 11.15 1518188 4026755332209 11.20
1513165 4026755246933 11.15 1518189 4026755332216 11.20
1513167 4026755276381 11.15 1518196 4026755339086 11.20
1513255 4026755188424 11.15 1518197 4026755339093 11.20
1513257 4026755217766 11.15 1518198 4026755339109 11.20
1513354 4026755188431 11.15 1518199 4026755339116 11.20
1513356 4026755225631 11.15 1519445 4026755277432 11.44
1513358 4026755217506 11.15 1519446 4026755278736 11.44
1513361 4026755225648 11.15 1519460 4026755331783 11.42
1513365 4026755225655 11.15 1519461 4026755331837 11.42
1513454 4026755188448 11.15 1519462 4026755335309 11.42
1513457 4026755218145 11.15 1519465 4026755335316 11.42
1513460 4026755218152 11.15 1519466 4026755335323 11.42
1513643 4026755245363 11.16 1519476 4026755371369 11.43
1513645 4026755188455 11.16 1519480 4026755191011 11.43
1513647 4026755218169 11.16 1519481 4026755434156 11.43
1513648 4026755399660 11.16 1519482 4026755262599 11.43
1513649 4026755218176 11.16 1519483 4026755371376 11.44
1513651 4026755329094 11.16 1519484 4026755371383 11.44
1513652 4026755218183 11.16 1519488 4026755347425 11.43
1513655 4026755329100 11.16 1519489 4026755329940 11.43
1513656 4026755276398 11.16 1519490 4026755219470 11.43
1513658 4026755285833 11.16 1519491 4026755188578 11.43
1514040 4026755297539 11.13 1519491 4026755188578 11.51
1514041 4026755291056 11.13 1519492 4026755188585 11.43
1514042 4026755288230 11.13 1519492 4026755188585 11.51
1514043 4026755247855 11.13 1519493 4026755216004 11.43
1514044 4026755297546 11.13 1519494 4026755216011 11.43
1514045 4026755247862 11.13 1519494 4026755216011 11.51
1514046 4026755247879 11.13 1519495 4026755328295 11.43
1514047 4026755247886 11.13 1519497 4026755219487 11.43
1514054 4026755307856 11.13 1519589 4026755359237 11.41
1514055 4026755351729 11.13 1519590 4026755337792 11.41
1514653 4026755271164 11.17 1519591 4026755337808 11.41
1514654 4026755271171 11.17 1519592 4026755337815 11.41
1514655 4026755271188 11.17 1519593 4026755227475 11.40
1515143 4026755268959 11.17 1519594 4026755348866 11.41
20.40 2017
20
20.a Indices
Article number

1519595 4026755228434 11.41 1532753 4026755354034 11.23
1519596 4026755228441 11.41 1532755 4026755354041 11.23
1519598 4026755277449 11.41 1532757 4026755354058 11.23
1519599 4026755278743 11.41 1532843 4026755354065 11.23
1519681 4026755427462 11.44 1532845 4026755354072 11.23
1519691 4026755328929 11.44 1532847 4026755354089 11.23
1519691 4026755328929 11.51 1533043 4026755354119 11.24
1519692 4026755328936 11.44 1533045 4026755354126 11.24
1519692 4026755328936 11.51 1533046 4026755354133 11.24
1519693 4026755328943 11.44 1533155 4026755354157 11.24
1519694 4026755328950 11.44 1533156 4026755354164 11.24
1519694 4026755328950 11.51 1533157 4026755354171 11.24
1533255 4026755354218 11.24
1522543 4026755316742 11.30 1533257 4026755354225 11.24
1522545 4026755316759 11.30 1533354 4026755354232 11.24
1522655 4026755317404 11.30 1533356 4026755354249 11.24
1522843 4026755316773 11.30 1533358 4026755354256 11.24
1522845 4026755316780 11.30 1533454 4026755354270 11.24
1523043 4026755317046 11.30 1533457 4026755354287 11.24
1523045 4026755317053 11.30 1533643 4026755354300 11.24
1523155 4026755316797 11.30 1533645 4026755354317 11.24
1523255 4026755316803 11.30 1533647 4026755354324 11.24
1523354 4026755316810 11.30 1533648 4026755419399 11.24
1523454 4026755316827 11.30 1534040 4026755354355 11.22
1534041 4026755354362 11.22
1532043 4026755353495 11.22 1534042 4026755354379 11.22
1532044 4026755353501 11.22 1534043 4026755354386 11.22
1532045 4026755353518 11.22 1534044 4026755354393 11.22
1532046 4026755353525 11.22 1534045 4026755354409 11.22
1532047 4026755353532 11.22 1534046 4026755354416 11.22
1532048 4026755353549 11.22 1534047 4026755354423 11.22
1532049 4026755353556 11.22 1534054 4026755354430 11.22
1532062 4026755354492 11.25 1534653 4026755354560 11.25
1532063 4026755354508 11.25 1534654 4026755354577 11.25
1532065 4026755354515 11.25 1534655 4026755354584 11.25
1532141 4026755353570 11.22 1537043 4026755354607 11.26
1532143 4026755353587 11.22 1537045 4026755354614 11.26
1532144 4026755353594 11.22 1537053 4026755354621 11.26
1532145 4026755353600 11.22 1537055 4026755354638 11.26
1532147 4026755353624 11.22 1537056 4026755354645 11.26
1532163 4026755354522 11.25 1537143 4026755354652 11.26
1532165 4026755354539 11.25 1537145 4026755354669 11.26
1532171 4026755354546 11.25 1537146 4026755419528 11.26
1532172 4026755354553 11.25 1537147 4026755419535 11.26
1532173 4026755412369 11.25 1537148 4026755419542 11.26
1532243 4026755353648 11.22 1537243 4026755354676 11.26
1532245 4026755353655 11.22 1537245 4026755354683 11.26
1532246 4026755353662 11.22 1537253 4026755354690 11.26
1532247 4026755353679 11.22 1537255 4026755354706 11.26
1532248 4026755353686 11.22 1537343 4026755354713 11.26
1532343 4026755353808 11.23 1537345 4026755354720 11.26
1532344 4026755353815 11.23 1537443 4026755354737 11.27
1532345 4026755353822 11.23 1537643 4026755354744 11.27
1532346 4026755353839 11.23 1537645 4026755354751 11.27
1532347 4026755353846 11.23 1538183 4026755354799 11.27
1532357 4026755353860 11.23 1538184 4026755354768 11.27
1532358 4026755353877 11.23 1538185 4026755354775 11.27
1532443 4026755353884 11.23 1538186 4026755354805 11.27
1532445 4026755353891 11.23 1538187 4026755354812 11.27
1532446 4026755353907 11.23 1538188 4026755354829 11.27
1532447 4026755353914 11.23 1538189 4026755354836 11.27
1532448 4026755353921 11.23 1538196 4026755354843 11.27
1532543 4026755353709 11.22 1538197 4026755354850 11.27
1532545 4026755353716 11.22 1538198 4026755354867 11.27
1532546 4026755353723 11.22 1538199 4026755354874 11.27
1532655 4026755353945 11.22 1539946 4026755430783 11.26
1532656 4026755353952 11.22 1539947 4026755430790 11.26
1532657 4026755353969 11.22
1532745 4026755353990 11.23 1540154 4026755383492 2.49
1532751 4026755354010 11.23 1540154 4026755383492 11.06
1532752 4026755354027 11.23 1540155 4026755383508 2.49
2017 20.41
20
20.a Indices
Article number

1540155 4026755383508 11.06 1563156* 4026755437362 11.49
1540160 4026755383522 2.49 1563157* 4026755437379 11.49
1540160 4026755383522 11.06 1563354* 4026755437386 11.49
1540254 4026755383539 2.49 1563356* 4026755437393 11.49
1540254 4026755383539 11.06 1567053* 4026755436440 11.49
1540255 4026755383546 2.49 1567055* 4026755436457 11.49
1540255 4026755383546 11.06 1569493* 4026755446722 11.51
1540257 4026755424782 2.49 1569594* 4026755446739 11.51
1540260 4026755396669 2.49 1569693* 4026755446746 11.51
1540260 4026755396669 11.06
1540555 4026755383553 2.49 1609302 4026755284539 3.17
1540555 4026755383553 11.06
1540557 4026755424799 2.49 1613066 4026755369236 1.14
1541054 4026755383560 2.49 1613401 4026755136876 1.16
1541054 4026755383560 11.06 1613465 4026755237498 1.16
1541055 4026755383577 2.49 1613501 4026755171655 1.16
1541055 4026755383577 11.06 1616001 4026755222531 1.16
1541060 4026755383584 2.49 1616100 4026755192759 1.16
1541060 4026755383584 11.06 1616200 4026755205404 1.16
1541066 4026755383591 11.06 1616301 4026755210330 1.16
1541072 4026755383607 11.06 1616500 4026755329957 1.16
1541155 4026755383614 11.06 1616575 4026755330779 1.15
1541160 4026755383621 11.06 1616675 4026755330786 1.15
1541254 4026755383638 11.06
1541255 4026755383645 11.06 1627965 4026755211832 1.18
1541260 4026755383652 11.06
1541355 4026755383669 11.06 1641451 4026755308013 1.17
1541360 4026755383676 11.06 1641451 4026755308013 10.10
1541455 4026755383683 11.06 1643561 4026755334609 1.87
1541460 4026755383690 11.06 1648077 4026755303070 1.104
1541555 4026755383706 11.07
1541560 4026755383713 11.07 1650793 4026755388732 3.59
1541566 4026755383720 11.07 1650793 4026755388732 3.65
1541572 4026755383737 11.07 1650793 4026755388732 3.74
1541584 4026755383744 11.07 1651500 4026755163797 6.11
1651500 4026755163797 6.24
1552543* 4026755437027 11.50 1651500 4026755163797 6.59
1552545* 4026755437034 11.50 1659990 4026755281019 9.33
1552655* 4026755437041 11.50 1659990 4026755281019 9.60
1552843* 4026755437058 11.50
1552845* 4026755437065 11.50 1661100 4026755171853 1.125
1553043* 4026755437072 11.50 1661100 4026755171853 3.65
1553045* 4026755437089 11.50 1661100 4026755171853 3.74
1553155* 4026755437096 11.50 1661445 4026755340624 1.17
1553354* 4026755437102 11.50
1670851 4026755419689 3.82
1562043* 4026755437119 11.48 1670852 4026755419696 3.82
1562045* 4026755437126 11.48 1670853 4026755419702 3.82
1562046* 4026755437133 11.48 1670854 4026755419719 3.82
1562048* 4026755437140 11.48 1670855 4026755419726 3.82
1562049* 4026755437157 11.48 1671003 4026755388428 1.68
1562051* 4026755437164 11.48 1671004 4026755388435 1.68
1562243* 4026755437171 11.48 1672003 4026755388442 1.68
1562245* 11.48 1672004 4026755388497 1.68
1562543* 4026755437195 11.48 1673703 4026755427820 1.68
1562545* 4026755437201 11.48 1673704 4026755427837 1.68
1562546* 4026755437218 11.48 1675103 4026755427882 1.68
1562547* 4026755437225 11.48 1675104 4026755427899 1.68
1562655* 4026755437232 11.48 1676149 4026755392753 3.56
1562656* 4026755437249 11.48 1676150 4026755392760 3.56
1562657* 4026755437256 11.48 1676151 4026755392777 3.56
1562660* 4026755437263 11.48 1676152 4026755392784 3.56
1562843* 4026755437270 11.49 1676153 4026755392791 3.56
1562845* 4026755437287 11.49 1676154 4026755392807 3.56
1562847* 4026755437294 11.49 1676155 4026755392814 3.56
1562849* 4026755437300 11.49 1676156 4026755427677 3.56
1563043* 4026755437317 11.49 1676251 4026755396034 3.57
1563045* 4026755437324 11.49 1676252 4026755396041 3.57
1563046* 4026755437331 11.49 1676253 4026755396058 3.57
1563047* 4026755437348 11.49
1563155* 4026755437355 11.49 1681650 4026755219579 1.125
20
20.a Indices
Article number

1683703* 4026755448702 1.69 2010083 4026755289039 14.20
1683704* 4026755448719 1.69 2010152 4026755148268 14.20
1683803* 4026755448726 1.69 2010153 4026755148275 14.20
1683804* 4026755448733 1.69 2010154 4026755148282 14.20
1685121* 6.91 2010155 4026755148299 14.20
1688290 4026755384031 3.42 2010316 4026755148305 14.20
1688291 4026755434187 3.47 2010516 4026755148329 14.22
1688295 4026755256789 3.42 2010616 4026755148343 14.22
1688296 4026755256796 3.43 2010716 4026755148367 14.22
1688297 4026755256802 3.43 2010816 4026755288889 14.21
1688350 4026755419733 3.30 2010824 4026755288896 14.21
1688356 4026755419740 3.30 2010832 4026755288902 14.21
1688703 4026755419757 3.27 2010851 4026755432879 14.21
1688704 4026755419764 3.27 2010882 4026755289022 14.21
1688706 4026755419771 3.27 2013051 4026755148381 14.20
1688708 4026755419788 3.27 2014151 4026755148411 14.20
1688710 4026755419795 3.27 2018073 4026755283211 14.21
1688712 4026755419801 3.27 2018083 4026755286199 14.21
1688716 4026755419818 3.27 2018090 4026755192292 14.21
1688746 4026755419825 3.29 2018091 4026755192308 14.21
1688747 4026755419832 3.29 2018092 4026755192315 14.21
1688748 4026755419849 3.29 2018093 4026755192322 14.21
1688749 4026755419856 3.29 2018094 4026755192339 14.21
1688750 4026755419863 3.29 2018095 4026755192346 14.21
2018182 4026755288919 14.21
1694890* 4026755385618 2.65 2018192 4026755288926 14.21
1694891* 4026755385625 2.65 2018195 4026755288933 14.21
1694892* 4026755391756 2.65 2018197 4026755288940 14.21
1694893* 4026755391879 2.65
1696081 4026755361995 5.06 2020006 4026755148428 14.22
1696082 4026755362008 5.06 2020008 4026755148435 14.22
1696083 4026755362015 5.06 2020010 4026755148442 14.22
2020012 4026755148459 14.22
1703063* 4026755448740 1.69 2020016 4026755148466 14.22
1703064* 4026755448757 1.69 2020020 4026755148473 14.22
1703163* 4026755448764 1.69 2020024 4026755148480 14.22
1703164* 4026755448771 1.69 2020106 4026755148497 14.22
2020108 4026755148503 14.22
1713063* 4026755448788 1.68 2020110 4026755148510 14.22
1713064* 4026755448795 1.68 2020112 4026755148527 14.22
1713163* 4026755448801 1.68 2020116 4026755148534 14.22
1713164* 4026755448818 1.68 2020120 4026755148541 14.22
1715813* 4026755448825 1.69 2020124 4026755148558 14.22
1715814* 4026755448832 1.69
1715883* 4026755448849 1.69 2030003 4026755148565 14.29
1715884* 4026755448856 1.69 2030004 4026755148572 14.29
2030006 4026755148589 14.29
1879850 4026755320329 1.105 2030008 4026755148596 14.29
2031103 4026755148602 14.29
1900051 4026755146493 5.36 2031104 4026755148619 14.29
1900052 4026755146509 5.36 2033053 4026755148671 14.29
1900053 4026755146516 5.36 2033151 4026755148688 14.29
1900054 4026755146523 5.36
1900055 4026755146530 5.36 2040050 4026755379389 14.30
1900056 4026755146547 5.36 2040053 4026755148718 14.30
1902051 4026755146554 5.36 2040055 4026755148725 14.30
1902052 4026755146561 5.36 2040056 4026755148732 14.30
1902053 4026755146578 5.36 2040090 4026755394719 14.30
1902054 4026755146585 5.36 2040152 4026755148770 14.30
1902055 4026755146592 5.36 2040154 4026755148787 14.30
1902056 4026755146608 5.36 2041051 4026755148800 14.30
1902057 4026755146615 5.36
1902058 4026755146622 5.36 2050051 4026755148817 14.30
1905051 4026755146639 6.128 2050052 4026755148824 14.30
1905551 4026755146646 6.128 2050053 4026755148831 14.30
1905552 4026755146653 6.129 2050054 4026755148848 14.30
2050055 4026755148855 14.30
1989100 4026755147667 1.18 2050056 4026755148862 14.30
2052051 4026755166996 14.27
2010053 4026755148237 14.20 2052053 4026755182989 14.27
2010073 4026755283204 14.20 2052080 4026755394726 14.29
20
20.a Indices
Article number

2052091 4026755183948 14.27 2083074 4026755422344 14.42
2052151 4026755148930 14.27 2083075 4026755422351 14.42
2052152 4026755148947 14.27 2083076 4026755422368 14.42
2052153 4026755148954 14.27 2083251 4026755150377 14.42
2052154 4026755148961 14.27 2083252 4026755150384 14.42
2052351 4026755148978 14.25 2083253 4026755150391 14.42
2052351 4026755148978 14.27 2083254 4026755150407 14.42
2053051 4026755148985 14.28 2083255 4026755150414 14.42
2053052 4026755148992 14.28 2083256 4026755150421 14.42
2053351 4026755149029 14.28 2083350 4026755421484 14.42
2053352 4026755149036 14.28 2083351 4026755421491 14.42
2053353 4026755149043 14.28 2083353 4026755421507 14.42
2053354 4026755149050 14.28 2083451 4026755150438 14.42
2083452 4026755150445 14.42
2060012 4026755149067 14.23 2083453 4026755150452 14.42
2060200 4026755394733 14.23 2083454 4026755150469 14.42
2060312 4026755279368 14.23 2083455 4026755150476 14.42
2060400 4026755359718 14.23 2083551 4026755150483 14.42
2061051 4026755202069 14.23 2083552 4026755150490 14.42
2064051 4026755232448 14.48 2083553 4026755150506 14.42
2064351 4026755232479 14.48 2083554 4026755150513 14.42
2065351 4026755290790 14.48 2083555 4026755150520 14.42
2083751 4026755150537 14.42
2072061 4026755419870 14.32 2083752 4026755150544 14.42
2073051 4026755149319 14.31 2083753 4026755150551 14.42
2073161 4026755419887 14.31 2083754 4026755150568 14.42
2074061 4026755419894 14.31 2083755 4026755150575 14.42
2074261 4026755419900 14.31 2083756 4026755150582 14.42
2075053 4026755149371 14.32 2083851 4026755150599 14.43
2075061 4026755419917 14.32 2083852 4026755150605 14.43
2075153 4026755149395 14.32 2083853 4026755150612 14.43
2075161 4026755419924 14.32 2083854 4026755150629 14.43
2075261 4026755419931 14.32 2083855 4026755150636 14.43
2076004 4026755149418 14.31 2083856 4026755150643 14.43
2076100 4026755149425 14.31 2083951 4026755150650 1.143
2076200 4026755149432 14.32 2083951 4026755150650 14.43
2083952 4026755150667 1.143
2080050 4026755149487 14.43 2083952 4026755150667 14.43
2080051 4026755149494 14.43
2080052 4026755149500 14.43 2091002 4026755150711 14.36
2080053 4026755149517 14.43
2080151 4026755149524 14.43 2100051 4026755150766 14.36
2080251 4026755149531 14.43 2100052 4026755150773 14.36
2080252 4026755149548 14.43 2100053 4026755150780 14.36
2080253 4026755149555 14.43 2100054 4026755150797 14.36
2080254 4026755149562 14.43 2100055 4026755150803 14.36
2080255 4026755149579 14.43 2102051 4026755150865 14.36
2080351 4026755149586 14.43 2102052 4026755150872 14.36
2080352 4026755149593 14.43 2102053 4026755150889 14.36
2080353 4026755149609 14.43 2102054 4026755150896 14.36
2080354 4026755149616 14.43 2103260 4026755425857 14.36
2080451 4026755149647 14.43 2104203 4026755240474 14.34
2080452 4026755149654 14.43 2104553 4026755355369 14.34
2080851 4026755149678 14.35 2107003 4026755279047 14.35
2080852 4026755149685 14.35
2080853 4026755149692 14.35 2110051 4026755151022 14.44
2080854 4026755149708 14.35 2110052 4026755151039 14.44
2080855 4026755149715 14.35 2110053 4026755151046 14.44
2080856 4026755149722 14.35 2110054 4026755151053 14.44
2083051 4026755150230 14.42 2110055 4026755151060 14.44
2083052 4026755150247 14.42 2110056 4026755151077 14.44
2083053 4026755150254 14.42 2110057 4026755151084 14.44
2083054 4026755150261 14.42 2110058 4026755151091 14.44
2083055 4026755150278 14.42 2110059 4026755151107 14.44
2083056 4026755150285 14.42 2110071 4026755317572 14.44
2083057 4026755150292 14.42 2110072 4026755317589 14.44
2083058 4026755150308 14.42 2110073 4026755317596 14.44
2083059 4026755150315 14.42 2110151 4026755151114 14.44
2083060 4026755421453 14.42 2110152 4026755151121 14.44
2083061 4026755421460 14.42 2110153 4026755151138 14.44
2083063 4026755421477 14.42 2110154 4026755151145 14.44
20
20.a Indices
Article number

2110155 4026755151152 14.44 2126356 4026755388374 14.15
2110251 4026755151169 14.44 2126371 4026755152333 14.15
2110252 4026755151176 14.44 2126400 4026755152340 14.16
2110253 4026755151183 14.44 2126454 4026755279054 14.15
2110254 4026755151190 14.44 2126474 4026755371437 14.15
2110255 4026755151206 14.44 2126484 4026755394740 14.15
2110350 4026755151213 14.44 2126600 4026755152364 14.14
2110351 4026755151220 14.44 2126691 4026755152371 14.14
2110352 4026755151237 14.44 2126695 4026755279061 14.16
2110353 4026755151244 14.44 2126751 4026755152388 14.14
2110354 4026755151251 14.44 2126754 4026755344233 14.14
2110355 4026755151268 14.44 2126755 4026755152401 14.14
2110551 4026755151275 14.45 2126774 4026755371444 14.14
2110552 4026755151282 14.45 2126803 4026755152418 14.14
2110553 4026755151299 14.45 2126804 4026755152425 14.14
2110554 4026755151305 14.45 2126951 4026755152432 14.14
2110555 4026755151312 14.45 2126952 4026755152449 14.14
2110556 4026755151329 14.45 2127050 4026755152456 14.41
2110557 4026755151336 14.45 2127051 4026755152463 14.41
2110558 4026755151343 14.45 2127052 4026755152470 14.41
2110559 4026755151350 14.45 2127053 4026755152487 14.41
2110560 4026755151367 14.45 2127150 4026755152494 14.41
2110561 4026755151374 14.45 2127151 4026755152500 14.41
2110562 4026755151381 14.45 2127152 4026755152517 14.41
2111051 4026755328677 14.45 2127153 4026755152524 14.41
2111052 4026755328684 14.45 2127250 4026755152531 14.41
2111053 4026755328691 14.45 2127251 4026755152548 14.41
2111055 4026755328707 14.45 2127253 4026755152555 14.41
2127500 4026755152562 14.49
2120003 4026755151398 14.13 2127650 4026755152586 14.41
2120103 4026755151411 14.13 2127651 4026755152593 14.41
2120104 4026755151428 14.13 2127652 4026755152609 14.41
2120153 4026755290806 14.49 2127653 4026755152616 14.41
2120261 4026755151459 14.13 2127700 4026755152623 14.49
2120285 4026755271256 14.14 2129000 4026755152678 14.17
2120403 4026755151480 14.13 2129102 4026755152685 14.17
2120503 4026755151497 14.13 2129152 4026755152708 14.17
2120561 4026755151503 14.13 2129200 4026755152715 14.17
2120585 4026755271263 14.14
2120691 4026755151527 14.16 2130051 4026755152722 14.24
2120803 4026755151558 14.13 2130052 4026755152739 14.24
2120891 4026755151572 14.14 2130053 4026755152746 14.24
2121871 4026755151619 14.11 2130054 4026755152753 14.24
2122103 4026755151664 14.11 2130108 4026755152760 14.24
2122153 4026755290813 14.49 2130150 4026755394757 14.24
2122261 4026755151701 14.11 2130512 4026755152777 14.24
2122262 4026755151718 14.11 2133000 4026755152784 14.26
2122403 4026755151732 14.11 2133100 4026755152791 14.26
2122503 4026755151749 14.11 2133200 4026755152807 14.26
2122561 4026755151756 14.11 2133300 4026755152814 14.26
2123103 4026755151886 14.10 2134100 4026755152821 14.26
2123104 4026755151893 14.10
2123153 4026755290820 14.49 2142700 4026755407679 14.08
2123261 4026755151930 14.10 2142732 4026755407686 14.08
2123503 4026755151985 14.10 2142735 4026755407693 14.08
2123561 4026755151992 14.10 2142737 4026755407709 14.08
2123871 4026755152050 14.10 2142754 4026755403435 14.08
2124203 4026755152104 14.12 2142762 4026755403442 14.08
2124204 4026755152111 14.12 2142900 4026755309874 14.09
2124360 4026755152159 14.12 2142901 4026755298512 14.09
2124361 4026755152166 14.12 2142951 4026755298529 14.09
2124362 4026755152173 14.12 2142990 4026755298536 14.09
2125003 4026755152197 14.17 2142992 4026755420951 14.09
2126051 4026755152241 14.16
2126100 4026755152272 14.16 2152554 4026755388381 14.11
2126200 4026755152296 14.16 2152754 4026755407716 14.08
2126251 4026755181623 14.16 2152951 4026755356182 14.09
2126300 4026755152302 14.15 2153554 4026755388404 14.10
2126351 4026755152319 14.15
2126354 4026755344226 14.15 2162993 4026755347173 14.09
2126355 4026755152326 14.15 2162993 4026755347173 14.45
2017 20.45
20
20.a Indices
Article number

2166500 4026755344240 14.14 4201373 4026755155846 8.66
4201374 4026755155853 8.66
3016404 4026755262834 5.07 4201375 4026755155860 8.66
3016406 4026755262841 5.07 4201376 4026755340464 8.66
3016408 4026755262858 5.07 4201377 4026755340471 8.66
3016410 4026755262865 5.07 4201378 4026755318562 8.66
3016412 4026755262872 5.07 4201379 4026755318579 8.66
3016416 4026755262889 5.07 4201471 4026755166910 8.66
4201472 4026755155877 8.66
4200191 4026755155525 8.63 4201473 4026755155884 8.66
4200208 4026755166699 8.62 4201474 4026755155891 8.66
4200211 4026755166705 8.62 4201475 4026755155907 6.109
4200212 4026755166712 8.62 4201475 4026755155907 8.66
4200252 4026755166248 8.61 4201476 4026755155914 8.66
4200253 4026755179132 8.61 4201477 4026755155921 8.66
4200254 4026755166231 8.61 4201804 4026755155938 8.12
4200255 4026755166262 8.61 4201806 4026755155945 8.12
4200256 4026755166255 8.61 4201808 4026755155952 8.12
4200272 4026755167696 8.66 4201810 4026755155969 8.12
4200273 4026755167702 8.66 4201812 4026755155976 8.12
4200282 4026755167672 8.66 4201816 4026755155983 8.12
4200283 4026755167757 8.64 4201820 4026755332537 8.18
4200284 4026755167764 8.64 4201824 4026755332544 8.18
4200285 4026755167740 8.64 4201852 4026755155990 8.11
4200288 4026755183474 8.64 4201853 4026755156003 8.11
4200289 4026755166903 8.64 4201854 4026755156010 8.11
4200290 4026755167788 8.64 4201855 4026755156027 8.11
4200291 4026755167771 8.64 4201856 4026755156034 8.11
4200295 4026755166637 8.63 4201857 4026755156041 8.11
4200308 4026755166729 8.62 4201858 4026755156058 8.11
4200453 4026755165395 11.36 4202072 4026755156065 8.66
4200552* 4026755431230 11.36 4202073 4026755156072 8.66
4200553* 4026755431247 11.36 4202074 4026755156089 8.66
4200554* 4026755431254 11.36 4202075 4026755156096 8.66
4200571* 4026755439847 11.36 4202076 4026755156102 8.66
4200572 4026755155532 8.66 4202077 4026755156119 8.66
4200573 4026755155549 8.66 4202078 4026755156126 8.66
4200574 4026755155556 8.66 4202204 4026755156133 8.12
4200575 4026755155563 8.66 4202206 4026755156140 8.12
4200576 4026755155570 8.66 4202208 4026755156157 8.12
4200577 4026755155587 8.66 4202210 4026755156164 8.12
4200590* 4026755435597 11.36 4202212 4026755156171 8.12
4200804 4026755155594 8.10 4202216 4026755156188 8.12
4200806 4026755155600 8.10 4202220 4026755332551 8.18
4200808 4026755155617 8.10 4202224 4026755332568 8.18
4200810 4026755155624 8.10 4202252 4026755156195 8.11
4200812 4026755155631 8.10 4202253 4026755156201 8.11
4200816 4026755155648 8.10 4202254 4026755156218 8.11
4201004 4026755399141 8.10 4202255 4026755156225 8.11
4201006 4026755399158 8.10 4202256 4026755156232 8.11
4201008 4026755399165 8.10 4202257 4026755156249 8.11
4201010 4026755399172 8.10 4202258 4026755156256 8.11
4201012 4026755399189 8.10 4202304 4026755341959 8.22
4201016 4026755399196 8.10 4202306 4026755341966 8.22
4201071 4026755218565 11.36 4202308 4026755341973 8.22
4201081 4026755218589 11.36 4202310 4026755341980 8.22
4201082 4026755218596 11.36 4202463 4026755156263 8.12
4201204 4026755155716 8.10 4202464 4026755156270 8.12
4201206 4026755155723 8.10 4202465 4026755156287 8.12
4201208 4026755155730 8.10 4202466 4026755156294 8.12
4201210 4026755155747 8.10 4202467 4026755156300 8.12
4201212 4026755155754 8.10 4202468 4026755156317 8.12
4201216 4026755155761 8.10 4202508 4026755166033 8.62
4201252 4026755344851 8.10 4202508 4026755166033 8.70
4201253 4026755344868 8.10 4202663 4026755156324 8.12
4201254 4026755344875 8.10 4202664 4026755156331 8.12
4201255 4026755344882 8.10 4202665 4026755156348 8.12
4201256 4026755344899 8.10 4202666 4026755156355 8.12
4201257 4026755344905 8.10 4202667 4026755156362 8.12
4201258 4026755344912 8.10 4202668 4026755156379 8.12
4201372 4026755155839 8.66 4202704 4026755341997 8.22
20
20.a Indices
Article number

4202706 4026755342000 8.22 4205706 4026755332247 8.28
4202708 4026755342017 8.22 4205752 4026755347807 8.28
4202710 4026755342024 8.22 4205753 4026755347814 8.28
4202804 4026755156386 8.13 4205754 4026755347821 8.28
4202806 4026755156393 8.13 4205781 4026755332575 8.30
4202808 4026755156409 8.13 4205804 4026755156799 8.14
4202810 4026755156416 8.13 4205806 4026755156805 8.14
4202812 4026755156423 8.13 4205808 4026755156812 8.14
4202816 4026755156430 8.13 4205810 4026755156829 8.14
4202904 4026755156447 8.13 4205812 4026755156836 8.14
4202906 4026755156454 8.13 4205816 4026755156843 8.14
4202908 4026755156461 8.13 4205904 4026755359305 8.46
4202910 4026755156478 8.13 4205990 4026755385243 8.46
4202912 4026755156485 8.13 4205991 4026755390018 8.46
4202916 4026755156492 8.13 4205992 4026755412932 8.46
4203204 4026755156508 8.13 4206204 4026755156881 8.14
4203206 4026755156515 8.13 4206206 4026755156898 8.14
4203208 4026755156522 8.13 4206208 4026755156904 8.14
4203210 4026755156539 8.13 4206210 4026755156911 8.14
4203212 4026755156546 8.13 4206212 4026755156928 8.14
4203216 4026755156553 8.13 4206216 4026755156935 8.14
4203304 4026755156560 8.13 4206252 4026755344929 8.14
4203306 4026755156577 8.13 4206253 4026755344936 8.14
4203308 4026755156584 8.13 4206254 4026755344943 8.14
4203310 4026755156591 8.13 4206255 4026755344950 8.14
4203312 4026755156607 8.13 4206256 4026755344967 8.14
4203316 4026755156614 8.13 4206257 4026755344974 8.14
4203852 4026755156621 8.11 4206258 4026755344981 8.14
4203853 4026755156638 8.11 4206304 4026755412949 8.46
4203854 4026755156645 8.11 4206504 4026755288995 8.29
4203855 4026755156652 8.11 4206506 4026755289008 8.29
4203856 4026755156669 8.11 4206508 4026755289015 8.29
4203857 4026755156676 8.11 4206604 4026755312553 8.29
4203858 4026755156683 8.11 4206606 4026755312560 8.29
4204252 4026755156690 8.11 4206608 4026755312577 8.29
4204253 4026755156706 8.11 4206704 4026755332254 8.28
4204254 4026755156713 8.11 4206706 4026755332261 8.28
4204255 4026755156720 8.11 4206776 4026755369847 8.52
4204256 4026755156737 8.11 4206780 4026755375978 8.53
4204257 4026755156744 8.11 4206790 4026755370768 8.52
4204258 4026755156751 8.11 4206790 4026755370768 8.53
4204351 4026755332797 8.19 4206795 4026755370775 8.52
4204352 4026755332803 8.19 4206797 4026755382600 8.53
4204451 4026755332810 8.19 4206804 4026755156942 8.17
4204452 4026755332827 8.19 4206806 4026755156959 8.17
4204506 4026755191363 8.68 4206808 4026755156966 8.17
4204508 4026755191370 8.68 4206810 4026755156973 8.17
4204510 4026755191387 8.68 4206812 4026755156980 8.17
4204590 4026755328714 8.68 4206816 4026755156997 8.17
4204591 4026755328721 8.68 4206904 4026755157000 8.17
4204592 4026755328738 8.68 4206906 4026755157017 8.17
4204593 4026755328745 8.68 4206908 4026755157024 8.17
4205404 4026755392685 8.29 4206910 4026755157031 8.17
4205406 4026755392692 8.29 4206912 4026755157048 8.17
4205504 4026755288964 8.29 4206916 4026755157055 8.17
4205506 4026755288971 8.29 4207004 4026755421354 8.56
4205508 4026755288988 8.29 4207005 4026755418033 8.56
4205552 4026755347760 8.29 4207089 4026755432756 8.57
4205553 4026755347777 8.29 4207090 4026755418040 8.57
4205554 4026755347784 8.29 4207091 4026755418057 8.57
4205555 4026755347791 8.29 4207092 4026755418064 8.57
4205581 4026755306033 8.30 4207093 4026755418071 8.57
4205583 4026755306057 8.30 4207094 4026755421361 8.56
4205591 4026755306064 8.30 4207095 4026755421378 8.56
4205591 4026755306064 8.52 4207096 4026755421385 8.57
4205592 4026755306071 8.30 4207097 4026755421521 8.57
4205593 4026755307528 8.30 4207098 4026755422542 8.56
4205604 4026755312522 8.29 4207099 4026755422559 8.56
4205606 4026755312539 8.29 4207104 4026755289046 8.32
4205608 4026755312546 8.29 4207106 4026755289053 8.32
4205704 4026755332230 8.28 4207108 4026755289060 8.32
2017 20.47
20
20.a Indices
Article number

4207110 4026755289077 8.32 4208510 4026755314168 8.32
4207204 4026755157062 8.17 4208563 4026755157505 8.16
4207206 4026755157079 8.17 4208564 4026755157512 8.16
4207208 4026755157086 8.17 4208565 4026755157529 8.16
4207210 4026755157093 8.17 4208566 4026755157536 8.16
4207212 4026755157109 8.17 4208567 4026755157543 8.16
4207216 4026755157116 8.17 4208568 4026755157550 8.16
4207304 4026755157123 8.17 4208604 4026755340655 8.22
4207306 4026755157130 8.17 4208606 4026755340686 8.22
4207308 4026755157147 8.17 4208608 4026755340693 8.22
4207310 4026755157154 8.17 4208610 4026755340709 8.22
4207312 4026755157161 8.17 4208612 4026755340716 8.22
4207316 4026755157178 8.17 4208616 4026755340723 8.22
4207504 4026755314090 8.32 4208704 4026755340662 8.22
4207506 4026755314106 8.32 4208706 4026755340730 8.22
4207508 4026755314113 8.32 4208708 4026755340747 8.22
4207510 4026755314120 8.32 4208710 4026755340754 8.22
4207804 4026755157185 8.16 4208712 4026755340761 8.22
4207806 4026755157192 8.16 4208716 4026755340778 8.22
4207808 4026755157208 8.16 4208804 4026755324860 8.24
4207810 4026755157215 8.16 4208806 4026755324877 8.24
4207812 4026755157222 8.16 4208808 4026755324884 8.24
4207816 4026755157239 8.16 4208810 4026755324891 8.24
4207820 4026755332582 8.18 4208812 4026755324907 8.24
4207824 4026755332599 8.18 4208816 4026755324914 8.24
4207952 4026755157246 8.15 4208820 4026755363357 8.24
4207953 4026755157253 8.15 4208824 4026755363364 8.24
4207954 4026755157260 8.15 4208852 4026755344998 8.24
4207955 4026755157277 8.15 4208853 4026755345001 8.24
4207956 4026755157284 8.15 4208854 4026755345018 8.24
4207957 4026755157291 8.15 4208855 4026755345025 8.24
4207958 4026755157307 8.15 4208856 4026755345032 8.24
4208104 4026755295177 8.32 4208857 4026755345049 8.24
4208106 4026755295184 8.32 4208858 4026755345056 8.24
4208108 4026755295191 8.32 4208881 4026755356793 8.25
4208110 4026755295207 8.32 4208882 4026755356809 8.25
4208152 4026755347265 8.32 4208883 4026755356816 8.25
4208154 4026755347272 8.32 4208884 4026755356823 8.25
4208156 4026755347289 8.32 4208885 4026755369458 8.25
4208158 4026755347296 8.32 4208886 4026755369465 8.25
4208181 4026755308044 8.32 4208890 4026755422566 8.24
4208182 4026755308051 8.32 4208893 4026755404333 8.25
4208183 4026755308068 8.32 4208904 4026755340990 8.24
4208192 4026755314182 8.32 4208906 4026755341034 8.24
4208193 4026755314199 8.32 4208908 4026755341041 8.24
4208194 4026755314205 8.32 4208910 4026755341058 8.24
4208195 4026755314212 8.32 4208912 4026755341065 8.24
4208204 4026755157314 8.16 4208916 4026755341072 8.24
4208206 4026755157321 8.16 4209004 4026755157567 8.20
4208208 4026755157338 8.16 4209006 4026755157574 8.20
4208210 4026755157345 8.16 4209008 4026755157581 8.20
4208212 4026755157352 8.16 4209010 4026755157598 8.20
4208216 4026755157369 8.16 4209012 4026755157604 8.20
4208220 4026755332605 8.18 4209016 4026755157611 8.20
4208224 4026755332612 8.18 4209020 4026755334616 8.20
4208352 4026755157376 8.15 4209024 4026755334623 8.20
4208353 4026755157383 8.15 4209090 4026755363821 3.42
4208354 4026755157390 8.15 4209090 4026755363821 8.32
4208355 4026755157406 8.15 4209102 4026755309959 6.109
4208356 4026755157413 8.15 4209102 4026755309959 8.33
4208357 4026755157420 8.15 4209103 4026755309966 8.33
4208358 4026755157437 8.15 4209202 4026755412963 8.33
4208363 4026755157444 8.16 4209204 4026755405064 8.33
4208364 4026755157451 8.16 4209206 4026755405071 8.33
4208365 4026755157468 8.16 4209208 4026755405088 8.33
4208366 4026755157475 8.16 4209210 4026755405095 8.33
4208367 4026755157482 8.16 4209351 4026755332834 8.19
4208368 4026755157499 8.16 4209352 4026755332841 8.19
4208504 4026755314137 8.32 4209451 4026755332858 8.19
4208506 4026755314144 8.32 4209452 4026755332865 8.19
4208508 4026755314151 8.32 4209504 4026755157628 8.20
20.48 2017
20
20.a Indices
Article number

4209506 4026755157635 8.20 4225704 4026755357349 8.40
4209508 4026755157642 8.20 4225804 4026755357356 8.40
4209510 4026755157659 8.20 4226004 4026755357363 8.39
4209512 4026755157666 8.20 4226504 4026755357370 8.39
4209516 4026755157673 8.20 4229001 4026755357493 8.43
4209520 4026755334630 8.20 4229002 4026755396393 8.43
4209524 4026755334647 8.20 4229010 4026755357509 8.43
4209602 4026755413779 8.64 4229011 4026755396409 8.43
4209603 4026755413786 8.64 4229015 4026755357516 8.43
4209604 4026755413793 8.64 4229016 4026755396416 8.43
4229020 4026755357523 8.43
4220004 4026755356977 8.36 4229021 4026755396423 8.43
4220006 4026755356984 8.36 4229035 4026755407785 8.44
4220052 4026755356991 8.36 4229040 4026755396485 8.43
4220053 4026755357004 8.36 4229041 4026755396492 8.43
4220054 4026755357011 8.36 4229050 4026755357530 8.44
4220104 4026755357028 8.36 4229050 4026755357530 8.46
4220106 4026755357035 8.36 4229051 4026755396430 8.44
4220108 4026755391374 8.36 4229052 4026755407181 8.44
4220110 4026755391381 8.36
4220152 4026755357042 8.36 6100508 4026755159158 8.74
4220153 4026755357059 8.36 6100606 4026755159165 8.74
4220154 4026755357066 8.36 6100608 4026755159172 8.74
4220155 4026755391398 8.36 6101008 4026755159196 8.75
4220190 4026755357455 8.42 6101051 4026755159202 8.75
4220191 4026755396386 8.42 6101053 4026755159219 8.75
4220204 4026755357073 8.37 6102010 4026755159233 8.75
4220206 4026755357080 8.37 6102016 4026755159240 8.76
4220208 4026755391404 8.37 6102051 4026755159257 8.75
4220210 4026755391411 8.37 6102051 4026755159257 8.75
4220252 4026755357097 8.37 6102053 4026755285079 8.75
4220253 4026755357103 8.37 6105008 4026755159271 8.74
4220254 4026755357110 8.37 6105108 4026755248821 8.74
4220304 4026755357127 8.37 6105751 4026755159288 8.74
4220306 4026755357134 8.37 6109052 4026755159301 8.76
4220308 4026755391428 8.37 6109152 4026755159325 8.76
4220310 4026755391435 8.37 6109551 4026755159349 8.74
4220352 4026755357141 8.37 6109551 4026755159349 8.75
4220353 4026755357158 8.37 6109552 4026755295764 8.74
4220354 4026755357165 8.37 6109552 4026755295764 8.75
4221004 4026755357172 8.38 6109851 4026755159363 8.76
4221006 4026755357189 8.38
4221052 4026755357196 8.38 6120008 4026755159370 8.71
4221053 4026755357202 8.38 6120010 4026755159387 8.71
4221054 4026755357219 8.38 6120012 4026755159394 8.71
4221090 4026755357462 8.42 6120016 4026755159400 8.71
4221104 4026755357226 8.38 6120058 4026755236170 8.71
4221106 4026755357233 8.38 6120060 4026755236187 8.71
4221152 4026755357240 8.38 6120062 4026755236194 8.71
4221153 4026755357257 8.38 6120066 4026755236200 8.71
4221154 4026755357264 8.38 6120108 4026755267433 8.71
4223116 4026755412970 8.41 6120508 4026755159455 8.70
4223190 4026755418095 8.44 6120581 4026755159462 8.70
4223191 4026755421392 8.42 6120591 4026755159479 8.70
4223192 4026755421408 8.43 6120595 4026755159486 8.70
4223193 4026755421415 8.43 6122006 4026755159578 8.71
4223194 4026755421422 8.44 6122008 4026755159585 8.71
4223195 4026755421439 8.43 6122010 4026755159592 8.71
4223196 4026755425468 8.43 6122506 4026755163490 8.70
4223197 4026755435603 8.43 6122508 4026755163506 8.70
4223216 4026755418101 8.41 6122510 4026755163513 8.70
4223290 4026755418118 8.44 6124000 4026755159639 8.72
4225004 4026755357271 8.39 6124100 4026755159646 8.70
4225090 4026755357479 8.42 6125000 4026755159660 8.72
4225104 4026755357288 8.39 6125100 4026755159677 8.72
4225152 4026755357295 8.39 6125101 4026755159684 8.72
4225204 4026755357301 8.40 6125161 4026755159691 8.72
4225304 4026755357318 8.40 6125163 4026755159707 8.72
4225352 4026755357325 8.40 6125200 4026755159714 8.72
4225504 4026755357332 8.39 6125300 4026755159721 8.72
4225590 4026755357486 8.42 6125361 4026755159738 8.72
20
20.a Indices
Article number
Art.-No. EAN/Code Page

6125363 4026755159745 8.72
6125400 4026755159752 8.72
6125500 4026755159769 8.72
6126000 4026755159806 8.72
6127000 4026755159813 8.72
6127200 4026755159837 8.72
20.50 2017
20
General information 20.b General conditions
Page

Content
Standard Terms and Conditions 20.52
2017 20.51
20
General information Standard Terms and Conditions
STANDARD TERMS AND CONDITIONS 4. If the Goods are processed or reshaped by the Purchaser and if processing is done with Goods
that Supplier has no property in, Supplier shall become co-owner of the Goods. The same shall
PREAMBLE apply if Suppliers Goods are completely reshaped and mixed with other goods.
These Standard Terms and Conditions for the Sales of Export Goods shall exclusively apply, unless
varied by express agreement accepted in writing by both parties. The offer, order acknowledgment, 5. If third parties take up steps to pledge to otherwise dispose of the goods, the Purchaser shall
order acceptance of sale of any products covered herein is conditioned upon the terms contained in immediately notify the Supplier in order to enable the Supplier to seek a court injunction. If the
this instrument. Any conditional or different terms proposed by the Purchaser are objected to and will Purchaser fails to do so in due time he will be held liable for any damages caused.
not be binding upon the Supplier unless assented in writing by the Supplier. 6. The Supplier shall on demand of the Purchaser release any part of the collateral if the value of the
These conditions shall govern any future individual contract of sale between the Supplier and the collateral held in favor of the Supplier exceeds the value of the claims being secured. It is to the
Purchaser to the exclusion of any other terms and conditions subject to which any such order is made Suppliers decision to release those parts of the collateral suitable for him.
or purported to be made, by the Purchaser. 7. For business abroad, the following also applies: The Supplier retains the right of ownership to the
Any typographical, clerical or other error or omission in any sales literature, quotation, price list, acceptance goods delivered until the sale price has been paid in full in compliance with the respective legal
of offer, invoice or other documents of information issued by the Supplier shall be subject to correction provisions in force in the country of destination. This retention of ownership is deemed to have been
without any liability on the part of the Supplier. expressly agreed between the Supplier and the Purchaser. Insofar as the country of destination
admits other liens in lieu of the retention of ownership, the lien that comes closest to the effect of
The provisions of these Standard Terms and Conditions extend to standard contract conditions which the retention of ownership will be deemed to have been agreed.
are used in a contract with a merchant in the course of business only.
6 WORKPIECE RELATED PRODUCTION UNITS
1. ORDERS AND SPECIFICATIONS
1. Insofar as workpiece related models or production units are manufactured or procured by the
1. No order submitted by the Purchaser shall be deemed to be accepted by the Supplier unless and
Supplier on behalf of the Purchaser, the Supplier will invoice them. Insofar as only cost components
until confirmed in writing by the Supplier or the Suppliers representative within 21 days after
submittal. have been charged, the Purchaser will also bear any remaining costs if he does not accept the
quantities it promised when concluding the contract or if the Purchaser wishes the withdrawal of
2. The quantity, quality and description of an any specification for the goods shall be those set out in the models or production units.
the Suppliers quotation (if accepted by the Purchaser) or the Purchasers order (if accepted by the
Supplier). Any such specification, sales literature, quotation etc. shall be strictly confidential and 2. The models and production units are the property of the Purchaser but will still remain in the
must not be made available to third parties. Suppliers possession.
3. The Purchaser shall be responsible for the Supplier for ensuring the accuracy of the terms of any 3. The models and production units will only be used for deliveries to the Purchaser, if the latter fulfils
order submitted by the Purchaser, and for giving the Supplier any necessary information relating to its acceptance and payment obligations towards the Supplier.
the goods within a sufficient time to enable the Supplier to perform the contract in accordance with 4. The Supplier will treat all models and production units with care. At the Purchasers request, its
its terms. models and production units will be insured at its expenses. Any further claims deriving from damage
4. If the goods are to be manufactured or any process is to applied to the goods by the Supplier in to or the loss of models and production units are excluded.
accordance with a specification submitted by the Purchaser, the Purchaser shall indemnify the 5. If deliveries are made in accordance with drawings or other specifications of the Purchaser and if
Supplier against all loss, damages, costs and expenses awarded against or incurred by the Supplier property rights of third parties are violated as a result, the Purchaser will release the Supplier from
in connection with or paid or agreed to be paid by the Supplier in settlement of any claim for any claims.
infringement of any patent, copyright, design, trade mark or other industrial or intellectual rights of
any other person which results from the Suppliers use of the Purchasers specification.
7 WARRANTIES AND EXCLUSION CLAUSES
5. The Supplier reserves the right to make any changes in the specification of the goods which are For defects in delivery the supplier will be liable subject to the exclusion of all further claims as
required to conform with any applicable statutory requirements or, where the goods are to be follows:
supplied to the Suppliers specification, which do not materially affect their quality or performance. 1. All parts that within 24 months of commissioning turn out to be unusable or only usable with major
impairment due to a circumstance that existed prior to the transfer of risk, in particular due to faulty
2. PRICE OF THE GOODS; PAYMENT construction, poor construction materials or defective design, are to be repaired or re-supplied
1. Unless specifically agreed, the prices and conditions in force on the date of delivery will apply. without charge at the reasonable discretion of the Supplier. If such defects are found, the Supplier
Prices apply ex works plus statutory VAT at the applicable statutory rate. Prices confirmed in non- must be notified immediately in writing. Replaced parts will become property of the Supplier. If the
commercial transactions, are binding if delivery is made within four months after order confirmation. dispatch, installation or commissioning is delayed at no fault of the Supplier, this liability will expire
After this period, if production costs have risen the Supplier reserves the right to increase the prices at the latest 30 months after the transfer of risk. For deliveries in Germany and to Austria only: with
accordingly. In commercial transactions, if production costs have risen, the Supplier reserves the the exception of electric components or products that are connected with electric components,
right to adapt prices also within the 4 month period. Insofar as the Supplier quotes prices for resale, the above liability will expire after 60 months provided that the products have been installed by a
they are a non-binding retail price. company specialised in sanitary, heating and air-conditioning technology and approved in accordance
2. Freight with a net value of goods from 1,000.00, are delivered with freight and packaging paid with the Handwerksordnung [Crafts Code] in Germany and in Austria according to similar provisions.
within the territory of Germany, otherwise we will charge any additional freight costs incurred, such 2. The Purchasers right to assert claims due to defects will in all cases become time-barred 24 months
as express delivery, guaranteed deadline and/or notification costs. For deliveries to third parties, after the date on which the complaint is made in a timely manner, however, at the earliest on the
we will charge for any additional costs incurred. In the case of third party deliveries / deliveries to
expiry of the warranty period.
building sites, the Purchaser is responsible for the immediate unloading of the goods. A charge will
be made for waiting times. Third party deliveries will be made on condition that heavy goods vehicles 3. No warranty is given for damage that occurs for the following reasons: Unsuitable or improper use,
are able to reach the delivery address without any difficulty. The Supplier is entitled to choose the faulty installation or commissioning by the Purchaser or third parties, natural wear and tear, defective
mode of shipment at its discretion. Export deliveries are subject to prior arrangement. or negligent handling, unsuitable operating equipment or replacement materials, defective construction
3. For deliveries with a net value of goods under 1,000.00, freight and packing will be charged at work, chemical, electro-chemical or electric influences, non-compliance with standards and
cost. regulations, etc. and the information and advice provided by the Supplier, unless they are the
Suppliers fault.
4. Unless agreed otherwise by the parties, payment is due to the Suppliers designated account within
30 days without any deduction and free of transaction charges. 14 days from the date of invoice 4. After informing the Supplier, the Purchaser must give the Supplier the necessary time and opportunity
with a 2% discount, 30 days net, unless otherwise indicated. Arrears interest will be charged at 4% to carry out any repairs and replacement deliveries that appear necessary at the Suppliers discretion,
above the respective base interest rate of the ECB. otherwise the Supplier will be released from liability for defect. Only in urgent cases where there is
a risk to operational safety and to avert disproportionately large damage does the Supplier have
5. All invoices will be made out in and payable in . For bills of exchange or cheques the Supplier will the right to remedy the defect itself or have the defect remedied by third parties and to demand
not accept any liability for the timely presentation or provision of the relative deed of protest. that Supplier reimburses any costs incurred, whereby the Supplier must be informed immediately
Collection costs will be borne by the Purchaser. Any cost approaches incurred will be refunded. of the remedy. It is also the case if the Supplier is late remedying the defect.
The Suppliers representatives are entitled to collect payments. In the event of payment difficulties
or the suspension of payments on the part of the Purchaser, all receivables will become due 5. Of the costs incurred for repairs or replacement deliveries, the Supplier will bear the costs of the
immediately. The right of retention is excluded. Off-setting is only admissible with claims that are replacement part including shipment provided that as the complaint proves to be justified. For the
undisputed or legally enforceable rest, the costs will be borne by the Purchaser.
6. The warranty period for the replacement part and the repair will be 12 months. It will run at least
3. DELIVERY
until the expiry of the original warranty period for the delivery item. The period of liability for defects
1. All delivery periods indicated are only binding if they have been designated as binding.
to the delivery item will be extended by the duration of interruption to business due to the repair
2. A delivery time begins when the order confirmation is sent, however, not before the documents, works.
permits and approvals to be procured by the Purchaser have been provided and not before any
agreed down payments have been received. 7. In the case modifications or maintenance work carried out incorrectly by the Purchaser or third
parties without the prior authorization of the Supplier, the liability for any resulting consequences
3. The delivery period is met if before expiry of this period, the delivery item has left the factory premises will be excluded.
or notification has been sent that it is ready for delivery.
8. Any further claims of the Purchaser, in particular a claim for compensation for damage that has not
4. The delivery period will be extended accordingly in the case of measures taken in relation to labour occurred to the delivery item itself, are excluded. This exclusion of liability will not apply in the case
disputes, in particular strikes and lockouts, and in the event of unforeseeable hindrances that are of intent or gross negligence, the culpable breach of essential contractual obligations and in cases
beyond the Suppliers control if such hindrances can demonstrably shown to have a considerable in which liability exists under the product liability law for damage to persons or property for privately
influence on the production or delivery of the delivery item. This also applies if the circumstances used objects in the case of defects of the delivery item.
arise for sub-suppliers.
9. The limitation of warranty to the repair or new delivery (supplementary performance) will be omitted
5. If the shipment is delayed at the Purchasers request, the latter will be charged with any storage if the supplementary performance fails.
costs incurred, however, at least 1 percent of the invoice amount in the case of storage on the
Suppliers premises, for each month starting one month after notification of readiness for delivery. 10. The Supplier will not be liable for consequential damage resulting from defective software.
However, after a suitable deadline has been set and expired without results, the Supplier is entitled 11. Only for the Copipe multi-layer composite pipe, the Copex PE-Xc-synthetic pipe and the Cofit
to dispose of the delivery item otherwise and to deliver to the Purchaser with an adequate extended connection as well as the Cofloor system of panel heating and air conditioning: provided they
delivery time.
have been installed together in the system by a company that is demonstrably specialized in sanitary,
6. For any claims of the Purchaser due to non-compliance with a delivery period to be valid, the latter heating and air-conditioning technology and approved in accordance with the Handwerksordnung
must have complied with its contractual obligations. [Crafts Code] in Germany or according to similar provisions in Austria: Throughout an extended
warranty period of ten years after the date of production, the Supplier will be liable for the maximum
total amount of 1 million euro per loss and 5 million euro per year. In all other cases, the provisions
4. TRANSFER OF RISKS of clauses 1 to 9 apply.
Risk of damage to or loss of the goods shall pass to the Purchaser as follows:
8 RETURN SHIPMENTS
- in the case of goods to be delivered otherwise than at the Suppliers premises, at the time of delivery 1. Return shipments will only be accepted after prior, specific agreement in writing, indicating proof
or, if the Purchaser wrongfully fails to take delivery of the goods, the time when the Supplier has of delivery. The goods must be in their unopened and undamaged original packaging and must
tendered delivery of the goods; meet the state of the art. The goods may not be any older than 12 months after the delivery date.
- in the case of goods to be delivered at the Suppliers premises (ex works, Incoterms 2010) at that Returns will be accepted subject to an inspection by the Supplier. For items returned carriage-paid,
time when the Supplier notifies the Purchaser that the goods are available for collection. a credit note will be issued to the amount of the invoice with a deduction of 20% for processing
charges, however, at least 20.00 per return shipment.
5. RETENTION OF TITLE 2. The possibility of return shipments of custom-made productions or modified serial fittings as well
as electric or electronic control components is excluded.
1. Notwithstanding delivery and the passing of risk in the Goods, or any other provision of these
conditions, the property in the Goods shall not pass to the Purchaser until the Supplier has received 9 CHOICE OF LAW; PLACE OF JURISDICTION;
payment in full of the price of the Goods and all other Goods agreed to be sold by the Supplier to 1. For any disputes arising from the contractual relationship, if the Purchaser is a merchant, a legal
the Purchaser for which payment is then due. entity under public law or a special fund under public law, law suits must be filed at the court which
2. After termination of the contract the Supplier shall have absolute authority to retake, sell or otherwise has jurisdiction over the Suppliers head office or its branch office that carried out the delivery. The
deal with or dispose of all or any part of the goods; Until such time as the property in the Goods Supplier is also entitled to file a suit at the place in which the Purchaser has its head offices.
passes to the Purchaser, the Purchaser shall hold the Goods as the Suppliers fiduciary agent, and 2. The Purchaser will acknowledge these General Terms and Conditions of the Supplier when issuing
shall keep the Goods properly stored, protected and insured. orders. Any conditions of purchase of the Purchaser that contradict those herein do not apply. Any
3. Until that time the Purchaser shall be entitled to resell or use the Goods in the ordinary course of diverging agreements must be made in writing. If individual clauses of the above conditions are
its business, but shall account to the Supplier for the proceeds of sale or otherwise of the Goods fully or partially invalid, it will not affect the validity of the remaining clauses and/or parts of such
including insurance proceeds, and shall keep all such proceeds separate from any moneys or clauses. Any invalid provision shall be deemed to be replaced by a valid provision that comes
properties of the Purchaser and third parties. closest to the economic purpose of the invalid provision.
20.52 2017
20
General information 20.c Imprint
Page
20.c Imprint
Content
Imprint 20.54
2017 20.53
20
General information 20.c Imprint
Oventrop GmbH &Co. KG

Paul-Oventrop-Strae1
D-59939 Olsberg
Germany
Telephone +49 2962 82 0
Fax +49 2962 82 450
Internet www.oventrop.com
E-Mail [email protected]
Limited partnership, seat Olsberg, commercial register: Court of Arnsberg HRA 4050
Personally liable partner: OV Verwaltungs-GmbH, seat Olsberg, commercial register: Court of Arnsberg HRB 3860
Managing directors: Jochen Fhnrich, Johannes Rump
VAT ID no.: DE 124283065
Subject to modifications without notice.

Printed on paper free from chlorine bleaching.
20.54 2017
20

Scheme 1369551

Uploaded by

Copyright:

Available Formats

Scheme 1369551

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Scheme 1369551

Uploaded by

Copyright:

Available Formats

1 Room temperature and climate control / Hydronic balancing at the radiator

Thermostats, radiator fittings, actuators, controllers

Surface heating and cooling "Cofloor"

Hydronic balancing in heating and cooling systems

5 Isolating and other pipe fittings

Stations for heating, cooling, potable water for dwellings/buildings

7 Local and district heating technology

Potable water technology "Aquanova-System"

9 Solar thermal energy

11 Connection system "Combi-System"

14 Heating oil technology

Different system applications

1 Room temperature and climate control / Hydronic balancing at the radiator

2 Surface heating and cooling "Cofloor"

3 Hydronic balancing in heating and cooling systems

3.p Connection system 3.108

5 Isolating and other pipe fittings

6 Stations for heating, cooling, potable water for dwellings/buildings

7 Local and district heating technology

8 Potable water technology "Aquanova-System"

9 Solar thermal energy

11 Connection system "Combi-System"

14 Heating oil technology

17 Different system applications

1.b Room thermostats

1.d "i-Tronic" Climate display device

1.e "R-Tronic" Climate display device/control

"Aktor MH CON B" Wireless actuator (M 30 x 1.5) 1.36

1.f Valves with "Q-Tech" for automatic hydronic balancing

1.g Valves for manual hydronic balancing

1.h Valves for large flow rates

1.i Thermostatic valve sets

1.j Exclusive radiator valves

1.k "Multiblock T/ T-RTL" Fittings for radiators with centre connection

Angle pattern fitting 1.87

1.n "Unofix" Refurbishment of one pipe heating systems

1.o Valve inserts for radiators with integrated distributor

1.p Valve inserts

1.q Return temperature limiters

Return temperature limiter sets 1.113

1.r Manual radiator valves

1.s "Q-Tech" Fittings for automatic hydronic balancing

1.t Fittings for radiators with integrated distributor

1.u Lockshield valves for conventional radiators

1.w Conversion fittings/Accessories for radiators

1.x Connection system

Thermostat "Uni XH" (M 30 x 1.5) Temperature setting may be limited or locked

white 7-28 C (10) 1011365 with '0' setting

A Label of EUnited Valves

capillary 2 m long 7-28 C 1011565 with '0' setting

Thermostat "Uni XHT" (M 30 x 1.5) Max. heating water temperature: 90 C

transparent 7-28 C (10) 1011300 with 0 setting

For further information see

Thermostat accessories: Pages 1.17, 10.10

Thermostat "Uni LH" (M 30 x 1.5) Temperature setting may be limited or locked

Busse Design Ulm

A Label of EUnited Valves

signal grey with 7-28 C (25) 1011461 with '0' setting

capillary 2 m long 7-28 C 1011665 with '0' setting