Scribd Logo
Upload

Welcome to Scribd!

  • 54 views

    2G-3G Reselection

    Uploaded by

    Doni Ariyanto
    The document discusses troubleshooting a 2G to 3G cell reselection issue where UEs are not able to latch onto a particular 3G site from a 2G site. Suggestions provided to resolve the issue include adding the 3G cell to the 2G BA list, checking that the 3G cell is defined as a neighbor in 2G with the correct parameters, adjusting reselection thresholds like FDDQmin, and checking that the 3G cell is not barred. The issue was later resolved for that user but they reported delays in reselecting to 3G. Suggestions for that included checking the QSI and QSC parameters.

    Copyright:

    © All Rights Reserved
    Download as TXT, PDF, TXT or read online from Scribd

    2G-3G Reselection

    Uploaded by

    Doni Ariyanto
    54 views2 pages
    The document discusses troubleshooting a 2G to 3G cell reselection issue where UEs are not able to latch onto a particular 3G site from a 2G site. Suggestions provided to resolve the issue include adding the 3G cell to the 2G BA list, checking that the 3G cell is defined as a neighbor in 2G with the correct parameters, adjusting reselection thresholds like FDDQmin, and checking that the 3G cell is not barred. The issue was later resolved for that user but they reported delays in reselecting to 3G. Suggestions for that included checking the QSI and QSC parameters.

    Original Title

    2G-3G_Reselection.txt

    Copyright

    © © All Rights Reserved

    Available Formats

    TXT, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document discusses troubleshooting a 2G to 3G cell reselection issue where UEs are not able to latch onto a particular 3G site from a 2G site. Suggestions provided to resolve the issue include adding the 3G cell to the 2G BA list, checking that the 3G cell is defined as a neighbor in 2G with the correct parameters, adjusting reselection thresholds like FDDQmin, and checking that the 3G cell is not barred. The issue was later resolved for that user but they reported delays in reselecting to 3G. Suggestions for that included checking the QSI and QSC parameters.

    Copyright:

    © All Rights Reserved
    Download as TXT, PDF, TXT or read online from Scribd
    Download as txt, pdf, or txt
    54 views2 pages

    2G-3G Reselection

    Uploaded by

    Doni Ariyanto
    The document discusses troubleshooting a 2G to 3G cell reselection issue where UEs are not able to latch onto a particular 3G site from a 2G site. Suggestions provided to resolve the issue include adding the 3G cell to the 2G BA list, checking that the 3G cell is defined as a neighbor in 2G with the correct parameters, adjusting reselection thresholds like FDDQmin, and checking that the 3G cell is not barred. The issue was later resolved for that user but they reported delays in reselecting to 3G. Suggestions for that included checking the QSI and QSC parameters.

    Copyright:

    © All Rights Reserved
    Download as TXT, PDF, TXT or read online from Scribd
    Download as txt, pdf, or txt
    of 2

    fon909

    2011-05-27, 03:25 PM
    Hi,
    Can anyone please shed some light on what could cause 2G - 3G cell reselection
    issue. UE in idle mode not able to latch on to particular 3G site from a 2G site.
    patek1968
    2011-05-27, 04:53 PM
    Hi,
    Can anyone please shed some light on what could cause 2G - 3G cell reselection
    issue. UE in idle mode not able to latch on to particular 3G site from a 2G site.

    So you're coming from a 2G site going to 3G site? Maybe there's no UMTS/GSM


    reselection available between sites..Or 3G site was not on-air..
    prasath085
    2011-05-30, 10:24 PM
    from Huawei vendor ,
    just add the 3g cell in 2g BA list for cell reselection.
    ajay_msfather
    2011-05-30, 11:51 PM
    What about NSN system? I m facing the same issue in INDIA. We are not able to
    reselect 2G to 3G .
    monnnos
    2011-05-31, 07:03 AM
    Hi all

    for 2G-3G reselection you have to check the following:


    *3G cell is defined as neighbour in 2G side
    *3G cell parameters defined in 2G side should be correct (LAC,PSC,RNC)
    *may be the threshold or parameters are set wrong check (FDDQmin(dB),FDDQoffset,2G-
    3G inter-rat enabled switch(sholud be on),Q_search_I(should be always search for 3G
    ngbr) )
    also check if the 3G cell is barred or not

    hope it help you

    Regards
    dk2000
    2011-06-03, 06:03 PM
    MOD CELLCCUTRANSYS FDD Qmin 3
    MOD CELLCCUTRANSYS Qsearch I 7
    MOD CELLCCUTRANSYS Qsearch P 7
    MOD CELLCCUTRANSYS FDD Q Offset 0
    MOD CELLCCUTRANSYS Qsearch C 15
    MOD CELLCCUTRANSYS 3G Search PRIO Yes
    SET CELLHOBASIC Inter-RAT Out BSC Handover Enable YES
    SET CELLHOBASIC Inter-RAT In BSC Handover Enable YES
    SET CELLHOBASIC Inter-RAT Cell Reselection Enable YES

    You should modify some parameter and declare 3G cell as a neighbor on 2G cell

    Best wishes
    ajay_msfather
    2011-06-07, 11:10 PM
    Thx for yr suggestion............

    Now 2G-3G cell reselection is successful but i m not able to lauch on 3G most of
    the time. UE should take Higher Freq ( 3G- 2100 Mhz ) as compair to 2G..So
    bydefault it should go to 3G if we have 3G coverage.

    Wht are the cause for delay in cell reselection for 2G to 3G?
    electron
    2011-06-08, 02:29 AM
    Thx for yr suggestion............

    Now 2G-3G cell reselection is successful but i m not able to lauch on 3G most of
    the time. UE should take Higher Freq ( 3G- 2100 Mhz ) as compair to 2G..So
    bydefault it should go to 3G if we have 3G coverage.

    Wht are the cause for delay in cell reselection for 2G to 3G?

    check QSI,QSC parameter most probably they are not correct


    scorpion
    2011-06-25, 03:46 AM
    For me the problem is only with BB-9520-Storm 2 handset,

    It is not moving from 2g to 3G automatically.

    Aall other handsets are fine...


    jimjim
    2011-06-25, 06:53 AM

    Hello there,

    This 2G - 3G cell reselection issue for smart phones iphone 4 and Blackberry, was
    noticed in networks where RAN is provided by Huawei and Core is provided by NSN.

    My question is this problem reproducable in the test bed?

    Would colleagus facing this problem to share the software version of the network
    elements they are using in their network?

    Is NSN core R4 or a higher release?

    :)
    Regards,

    dk2000
    2011-06-28, 04:18 PM
    Hello,

    I think the reselection from 2G to 3G is not affected by the core network.

    You should use the Tems to read the message from 2G RAN send to UE ( SIB 2 quater).

    You might also like