Scribd
Upload
257 views4 pages

Here+ RTK GNSS Firmware v1.3 Update Instruction

This document provides instructions for updating the firmware on RTK GNSS devices from version 1.3 to 3.01. It involves using a USB cable to connect the base or rover device to a computer running U-Center software. Users must select the correct firmware file for their device, base or rover, and flash it to the device using the firmware update tool in U-Center. The process should be repeated if interrupted to ensure the firmware is fully updated.

Uploaded by

Fazrul
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
257 views4 pages

Here+ RTK GNSS Firmware v1.3 Update Instruction

This document provides instructions for updating the firmware on RTK GNSS devices from version 1.3 to 3.01. It involves using a USB cable to connect the base or rover device to a computer running U-Center software. Users must select the correct firmware file for their device, base or rover, and flash it to the device using the firmware update tool in U-Center. The process should be repeated if interrupted to ensure the firmware is fully updated.

Uploaded by

Fazrul
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Here+

RTK GNSS firmware v1.3 update instruction



1 Use USB cable to connect Base or Rover



2 For connecting Rover, we need to dissemble the Rover cover and use USB
cable to connect Rover with computerWe need also connect Rover with
Flight controller to provide power to the rover during the firmware
update.



3 Download Ucenter:
https://www.u-blox.com/en/product/u-center-windows
4 Search HPG 1.30 in Ublox website
https://www.u-blox.com/en/search?keywords=HPG+1.30
download firmwareu-blox M8 Flash Firmware 3.01 HPG 1.30 - ONLY for High
Precision GNSS products
Open Ucenter v8.25 or more advanced ucenter



4select tools->u-blox 5 8 Flash Firmware Updatecheck options shown in the
picture.


5 Unzip Firmware image and select firmware
For Base update, please select
UBX_M8_301_HPG_130_REFERENCE_NEOM8P2.59a07babb501ba6a89ff87cac2f
2765f.bin
For Rover update, please select
UBX_M8_301_HPG_130_ROVER_NEOM8P0.3ee86a9e4775e3335e742b53527fa5
d0.bin



















6 Under Flash Information Structure(FIS) File, select Flash.xmlFlash.xml is
under Ucenter root directoryU-center_v8.25->flash.xml



6Press OKand wait for the firmware update completeIf the progress is
interruptedplease re-update the firmware as this instruction. Thanks!

You might also like