Scribd
Upload
2K views1 page

Creating Data Backup - Restoring On PCU20

The document provides instructions for creating a backup of data from the flash memory of a PCU20 control unit onto a CF card, and then restoring that data from the CF card back onto the flash memory. It outlines inserting a formatted CF card into the PCMCIA slot while the unit is powered off. To backup, select the option to copy internal flash to the card during startup. To restore, select the option to update from the card without overwriting configuration data.

Uploaded by

marcos lemos
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
2K views1 page

Creating Data Backup - Restoring On PCU20

The document provides instructions for creating a backup of data from the flash memory of a PCU20 control unit onto a CF card, and then restoring that data from the CF card back onto the flash memory. It outlines inserting a formatted CF card into the PCMCIA slot while the unit is powered off. To backup, select the option to copy internal flash to the card during startup. To restore, select the option to update from the card without overwriting configuration data.

Uploaded by

marcos lemos
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Creating a Data backup and Restoring it on PCU20

Pre-requisites:
CF-Card of 64MB properly formatted (FAT32)
An adapter for PCMCIA-Slot

Creating a data backup

Procedure:
1. Switch OFF the control unit.
2. Insert the CF-Card using the adapter into the PCMCIA-Slot.
3. Press key 6 during the start-up of the PCU 20 while the message Starting caldera
DRDOS... is being displayed.
4. Select Point < 8 > - Copy/Save internal FLASH to PC-Card (incl. confi-guration and
OEM data). The data of the FLASH-memory are saved on the PC-Card in the file
PCU_20.abb.
5. After the backup of the data the PCU 20 is re-started.
6. The CF-Card can now be removed.

Note: CF-Card can be read on an external computer.


ABB-file must not be modified using an editor.

Restoring the data of the FLASH-memory

Procedure:
1. Switch OFF the control unit.
2. Insert the CF-Card using the adapter into the PCMCIA-Slot.
3. Press key 6 during the start-up of the PCU 20 while the message Starting caldera
DRDOS... is being displayed.
4. Punkt < 0 > - Update from PC-Card: without updating configuration data select. The
data backup is checked and read into the Flash-memory.
5. After the data have been read in, the PCU 20 is re-started.
6. The CF-Card can be removed.

You might also like