Atlas Copco handheld hydraulic equipment

Powerful, lightweight and portable

2
HAMMERS AND BREAKERS

Hydraulics hits harder

The irst time you use a hydraulic breaker, youre in for Atlas Copco has been at the forefront
a surprise. Heres this compact quiet tool... and it hits in developing vibration-dampening
harder than any other type of breaker. Thats because technology for decades. The range of E
hydraulics are more eficient than electric, pneumatic or version breakers reduce the vibrations transmitted to
petrol-driven breakers. operators hands and arms with about 70 % compared
to standard version breakers. Better vibro-reduction
Atlas Copco hydraulic breakers are available in three means less fatigue for the operator, which in turn means
versions: Standard-, E- and HBP version. better productivity.

E version with vibration reduction HBP - usable on skidsteers

The vibro-reduced breakers the E version are as The HBP version is specially made to accept higher
powerful as the standard models, but with lower levels back pressure in the return line. With this feature,
of vibration. the HBP breakers can be operated from almost any
hydraulic outlet even on skid steers with high return
pressure systems. They are also the preferred choice
when extreme long hoses are needed.

Designed to boost productivity

VIBRATION LEVEL COMPARISON
The slim design gives operators a clear line of sight
to the point of the working tool in order to keep
productivity high. And productivity is given an extra
boost thanks to the well-balanced design and also
because of the elimination of external side bolts and
machine parts that could come into contact with the
Standard E version operators body.
LH Breaker LH Breaker

5
 SELECTION GUIDE

Different sizes, different versions

LH 11 Powerful horizontal pick hammer LH 270/280 E Heavy-duty, multi-purpose breakers
This D-handle hammer is ideal for horizontal work These powerful, high productivity breakers provide
in brick, mortar and light concrete. It is one of the heavy-duty breaking in frozen soil, asphalt and
most powerful pick hammers on the market. With reinforced concrete and are considered to be among the
its detachable front handle (optional), the LH 11 is a best in their class.
popular choice for renovation, demolition and structural
alteration jobs. LH 390/400 E Super heavy-duty breakers
The LH 390 and LH 400 E are probably the most
LH 180/190 E Lightweight, multi-purpose breakers powerful handheld breakers in the world. They are
These highly productive tools are used to break used for the most demanding jobs in heavy asphalt,
brickwork, frozen soil, asphalt, concrete, as well as reinforced concrete and foundations.
for tamping and compaction. The breakers are popular
with contractors and rentals for indoor and outdoor
renovation and demolition jobs, and are the preferred
Hammer LH 11
choice for major railroad companies in tie tamping
Weight incl hoses kg 15.5
applications.
Length mm 650
Oil flow l/min 20
LH 220/230 E Medium weight, multipurpose breakers Working pressure bar 80-100
The LH220/230 E are among the best general purpose Max back pressure bar 10
Impact rate blows/min 2300
breakers available in the 23-28 kg range. They are
Vibration level 3 axes (ISO 28927-10)
m/s 16,5
commonly used with 5 asphalt chisels for road (Hex 22x82,5) 1)
Sound power level guaranteed
building and maintenance applications, but also work (2000/14/EC) 3) Lw dB(A) 105
well in brickwork, frozen soil and concrete. Sound pressure level (ISO 11203) 3) Lp, dB(A) 93
r=1m
EHTMA class C
Shank size mm Hex 22x82,5
Part number 1801 1741 18

6
Standard breakers (incl HBP version) LH 180 LH 220 LH 220 HBP LH 270 LH 270 HBP LH 390 LH 390 HBP
Weight incl hoses 1) kg 19,5 22,5 22,5 26,5 26,5 33 33
Length 1) mm 650 690 690 765 765 765 765
Oil flow l/min 20 20-30 20-30 20-30 20-30 30-40 30
Working pressure bar 95-110 105-125 115-130 110-125 115-130 110-125 115-130
Max back pressure bar 10 15 35 15 35 15 20
Impact rate blows/min 1400 1500-2100 1500-2100 1350-1750 1350-1750 1150-1600 1150-1600
Vibration level 3 axes (ISO 28927-10) 2) 3) m/s 15,1 17,3 17,4 18,2 18,1 20,1 20,1
Sound power level guaranteed (2000/14/EC) 3) Lw dB(A) 107 107 107 110 110 106 106
Sound pressure level (ISO 11203) 3) Lp, r=1m dB(A) 93 94 94 95 95 93 93
EHTMA class C C/D C/D C/D C/D D/E D

Part number
Hex 25x108 1801 3443 36 1801 3543 46 1801 3546 87 - - - -
Hex 28x152 1801 3443 37 1801 3543 47 1801 3546 88 1801 3643 56 1801 3646 97 1801 3743 64 1801 3647 05
Hex 28x160 1801 3443 38 1801 3543 48 1801 3546 89 1801 3643 57 1801 3646 98 1801 3743 65 1801 3647 06
Hex 32x152 1801 3443 39 1801 3543 49 1801 3546 90 1801 3643 58 1801 3646 99 1801 3743 66 1801 3647 07
Hex 32x160 1801 3443 40 1801 3543 50 1801 3546 91 1801 3643 59 1801 3647 00 1801 3743 67 1801 3647 08
LH 180 and LH 220 measured with Hex 25, LH 270 and LH 390 measured with Hex 32
1)

LH 180 and LH 220 measured at 20 l/min, LH 270 and LH 390 measured at 30 l/min.
2)

Important: Full details of measurement are available in the Safety and Operating Instruction of the product (part no 3392 5206 01). It can be found on www.acprintshop.com
3)

Vibro-reduced breakers (incl HBP version) LH 190 E LH 230 E LH 230 E HBP LH 280 E LH 280 E HBP LH 400 E LH 400 E HBP
Weight incl hoses 1) kg 25 28 28 32,5 32,5 39 39
Length 1) mm 650 690 690 765 765 765 765
Oil flow l/min 20 20-30 20-30 20-30 20-30 30-40 30
Working pressure bar 95-110 105-125 115-130 110-125 115-130 110-125 115-130
Max back pressure bar 10 15 35 15 35 15 20
Impact rate blows/min 1400 1500-2100 1500-2100 1350-1750 1350-1750 1150-1600 1150-1600
Vibration level 3 axes (ISO 28927-10) 2) 3) m/s 5,0 4,8 4,9 6,0 5,8 5,4 6,4
Sound power level guaranteed (2000/14/EC) 3) Lw dB(A) 107 107 107 110 110 106 106
Sound pressure level (ISO 11203) 3) Lp, r=1m dB(A) 93 94 94 95 95 93 93
EHTMA class C C/D C/D C/D C/D D/E D

Part number
Hex 25x108 1801 3443 41 1801 3543 51 1801 3546 92 - - - -
Hex 28x152 1801 3443 42 1801 3543 52 1801 3546 93 1801 3643 60 1801 3647 01 1801 3743 68 1801 3647 09
Hex 28x160 1801 3443 43 1801 3543 53 1801 3546 94 1801 3643 61 1801 3647 02 1801 3743 69 1801 3647 10
Hex 32x152 1801 3443 44 1801 3543 54 1801 3546 95 1801 3643 62 1801 3647 03 1801 3743 70 1801 3647 11
Hex 32x160 1801 3443 45 1801 3543 17 1801 3546 96 1801 3643 63 1801 3647 04 1801 3743 71 1801 3647 12
1)
LH 190 E and LH 230 E measured with Hex 25, LH 280 E and LH 400 E measured with Hex 32
2)
LH 190 E and LH 230 E measured at 20 l/min, LH 280 E and LH 400 E measured at 30 l/min.
3)
Important: Full details of measurement are available in the Safety and Operating Instruction of the product (part no 3392 5206 01). It can be found on www.acprintshop.com

7
WORKING TOOLS

A tool for every job

Atlas Copco working tools are manufactured from a The striking face is end-milled, which results in better
steel that is purpose designed and speciied for breaker contact between the piston and the tool, improved
applications. A controlled heat treatment process transfer of energy, as well as less vibration and wear
imparts both strength and high wear resistance to on both breaker and working tool. At Atlas Copco we
deep surface layers while maintaining a tough shock- maintain a comprehensive range of working tools to
resistant central core to resist breakage. ensure that you always have the right tool for the job.

W 22 x 82.5 mm 25 x 108 mm 28 x 160 mm 32 x 160 mm

L

W (mm) L (mm) Part no. W (mm) L (mm) Part no. W (mm) L (mm) Part no. W (mm) L (mm) Part no.
Moil point 380 3083 3242 00 380 3083 3253 00 380 3083 3271 00 380 3083 3205 00
1000 3083 3243 00 450 3083 3272 00 450 3083 3206 00
1000 3083 3273 00 1000 3083 3207 00
Narrow chisel 25 380 3083 3244 00 28 380 3083 3254 00 32 380 3083 3274 00 35 380 3083 3208 00
25 1000 3083 3245 00 32 450 3083 3275 00 35 450 3083 3209 00
32 1000 3083 3276 00 35 1000 3083 3210 00
Wide chisel 75 380 3083 3246 00 75 380 3083 3255 00 75 380 3083 3277 00 75 380 3083 3211 00
Wedge chisel 35 380 3083 3250 00 35 380 3083 3258 00 40 400 3083 3282 00 40 400 3083 3216 00
Digging chisel 75 450 3083 3247 00 75 380 3083 3256 00 75 380 3083 3279 00 75 380 3083 3213 00
Digging spade 120 400 3083 3248 00 120 380 3083 3257 00 125 380 3083 3280 00 125 380 3083 3214 00
Asphalt cutter 125 380 3083 3069 00 115 300 3083 3278 00 115 300 3083 3212 00
Clay spade 125 430 3083 3249 00 125 430 3083 3033 00 140 380 3083 3281 00 140 380 3083 3215 00
Shaft for pad 310 3083 3251 00 280 3083 3259 00 230 3083 3283 01 235 3083 3218 01
Tamping pad, round 175 3083 3252 10 175 3083 3252 10 180 3083 3301 00 180 3083 3301 00
Tamping pad, square 175 3083 3239 00 175 3083 3239 00 150 3083 3302 00 150 3083 3302 00
Tamping pad, square 200 3083 3197 00 200 3083 3197 00
Driver pad, round 100 9245 2817 90 100 9245 2817 90
Tie tamper 100 565 3083 3319 00 100 565 3083 3217 00

8
ROCK-DRILL SUBMERSIBLE PUMPS
This lightweight tool is designed for drilling blast, Atlas Copco submersible hydraulic pumps are light,
anchor and rock splitting holes. Used for example by compact and extremely eficient. They are used in
contractors, armies and utilities who want convenient a wide range of applications including continuous
and eficient drilling without a large compressor. With pumping of clean or contaminated water on building
standard integral steel, it drills diameters of up to 50 sites, in looded excavations and cellars. The pumps
mm and depths down to approx. 6 meters by using are driven by a build-in hydraulic motor featuring a
hydraulic power for impact and rotation. A small special drive shaft, seal and bearings. They are cooled
additional compressor is needed for lushing. and lubricated by the hydraulic oil and can therefore
be left to run dry without damage. The pumps offer
impressive performance considering their size and
weight, providing heads of 25 and 32 meters and output
of 840 and 1,920 l/min.

The 2-inch submersible water pump handles small

stones and debris of up to 10 mm and is an ideal all-
Pumps LWP 2 LTP 3
Rock drill LHD 23 M round pump for municipalities, water and waste utilities
Weight (rounded) kg 11 13
Weight (incl hoses) kg 26 and rescue services. It is also widely used in general Width mm 225 300
Service weight kg 28,5 construction and road services / maintenance work. Oil flow l/min 18-24 26-38
Oil flow l/min 20-25 Working pressure bar 100 140
Working pressure bar 100-140 Max pressure bar 172 172
Max back pressure bar 15 The 3-inch submersible trash pump can be used in Pump head max m 25 32
Impact rate (at 25 l/min) blows/min 2600 similar applications, but can also handle mud and Pump flow max l/min 840 1920
Revolutions rpm 320-400 slurries containing stones and particles of up to 60 Discharge in 2 3
Torque Nm 30 Solids handling up to mm 10 60
Vibration level 3 axes (ISO 28927-10) 1) m/s 11,7
mm in diameter. Both pumps come with a 10-meter
EHTMA class C D
Sound power level guaranteed dB(A) 118
discharge hose itted with quick-release couplings for Part number 1) 1806 1014 34 1806 1014 35
(2000/14/EC), Lw 1)
easy handling. 10 m hose included
1)

Sound pressure level (ISO 11203) 1)

Lp, r=1m dB(A) 104
EHTMA class C Extra hose 2 inch 3 inch
Shank size Hex mm 22x108 Length m 10.0 10.0
Part number, CW version (clockwise 1801 3800 01 Connection mm 50.8 76.2
rotation)
Weight kg 3.4 3.8
Part number, CCW version (counter 1801 3800 02
clockwise rotation) Snap-lock Snap-lock
Comments quick-release quick-release
Important: Full details of measurement is available in the Safety and
1)
coupling, female coupling, female
Operating Instruction of the product (part no 3392 5013 01). It can be
found on www.acprintshop.com Part number 3378 0021 00 3378 0021 01

9
 CUT-OFF SAWS
These powerful, light and compact saws make a quick
job of cutting concrete, asphalt and steel. Their simple
hydraulic design with direct drive provides high
productivity, while reducing maintenance, especially in
comparison with belt-driven saws. The compact, slim
design and open cutting face give you a good overview
of the work. With the help of a lightweight cart you can Cut-off saws LS 14 LS 16

use the saws for loor, road and other light surface jobs. Weight (incl hoses) kg 12 13
Service weight (incl disc) kg 13,5 15
Oil flow l/min 20-30 20-40
Max pressure bar 172 172
Revolutions rpm 2500-4000 2000-4000
Speed m/s 46-75 42-85
Disc size mm 355 405
Arbor size mm 25,4 25,4
Cutting depth mm 133 160
Vibration level 3 axes (ISO
28927-8) 20 lpm 1) m/s 4,9 4,9
Sound power level guaranteed
(2000/14/EC), Lw 1) dB(A) 99 115
Cart LSC cart
Sound pressure level dB(A) 86 102
Comments incl. water kit (ISO 11203) 1) Lp, r=1m
Weight kg 25 EHTMA class C/D C/D/E
Part number 1809 0010 01 Part number 1809 0140 01 1809 0160 00
Important: Full details of measurement is available in the Safety and
1)

Operating Instruction of the product (part no 3392 5042 01). It can be

found on www.acprintshop.com
Water kit, see page 16.

Concrete Concrete Asphalt Asphalt

Diamond discs diamond disc diamond disc diamond disc diamond disc
Blade size mm 355 405 355 405
Arbor hole diameter mm 25.4 25.4 25.4 25.4
Weight kg 1.6 2.3 1.6 2.6
Comments Cutting concrete and Cutting concrete and Cutting asphalt Cutting asphalt
concrete reinforcement concrete reinforcement
Part number 3378 0050 57 3371 8097 27 3378 0050 58 3371 8097 26

10
 CORE-DRILLS

These powerful core drills are ideal for all hand-

drilling jobs and where theres no room for drill stands.
Due to the hydraulic control of the drill torque, these Core drills LCD 500 LCD 1500

core drills give very low kickback should drill bits Weight (incl hoses) kg 9,5 9
Service weight (incl
jam. This helps operators maintain control, even when hoses and 112 mm tool) kg 13 13
working on holes of 200 mm in diameter and above. Length (without drill) mm 414 406
They are used by professionals in a wide range of Oil flow l/min 20-30 20-30
Working pressure bar 120-172 120-172
applications including building renovation and utility
Revolutions rpm 600-900 1500-2250
works. They are relied on to install drainage, sewer Drill diameter mm 50-202 12-75
and water pipes, plus cable and ventilation ducts where Hydraulic ports 1) BSP BSP
Vibration level 3 axes
large and deep holes are needed. The core drills offer (ISO 28927-5), 20 lpm 2) m/s 3,1 2,7
spark-free operation since there are no electrical Sound pressure level dB(A) <70 <70
(ISO 11203) 2) Lp, r=1m
components and so can be used inside buildings EHTMA class C/D C/D
and even underwater. With a standard round, 60 mm Part number 1806 1014 38 1806 1014 39
front-end, you can use Atlas Copco core drills with 1/2 BSP male x 1 14 UNC male drive adaptor included for use of larger
1)

diameter core bits.

the majority of commonly available drill stands. The Important: Full details of measurement is available in the Safety and
2)

Operating Instruction of the product (part no 3392 5189 01). It can be

drills come with a steel carrying case which simpliies found on www.acprintshop.com

handling, transport and storage. Water kit, see page 16.

DIAMOND CORE BITS (THREAD SIZE 1 1/4 UNC) Drill chuck

62 82 102 112 132 152 162 200 Comment for steel and wood drilling
Length mm 100
Length mm 450 450 450 450 450 450 450 450 Weight kg 0.4
Weight kg 1.7 2.4 3.2 3.7 4.6 6.0 6.3 9.9 Chuck 1.5 - 13 mm (0.06 - 0.51 in)
Drilling material Concrete, reinforced concrete and brickwork Drilling material Adaptor (1/2 in bsp to 3/8 bsp)
Part number 3378 0050 61 3378 0050 62 3378 0050 63 3378 0050 64 3378 0050 65 3378 0050 66 3378 0050 67 3378 0050 68 Part number 3371 8077 68

11
 POST DRIVERS
Used for driving in road barrier tubes, proiles, hose and features a remote on/off valve that allows the
signposts, fences and a wide range of anchors, the post operator to activate the driver even when it is placed on
drivers provide stable, powerful, high speed driving for top of tall posts.
a variety of post sizes. When operated with an optional
hose-mounted remote-controlled valve, the drivers can They accept a high back pressure in the return line.,
be run with both open- or closed-centre systems. which allow you to operate from almost any hydraulic
outlet even on skid steers with high return pressure
The LPD-T comes with a standard 0.5 meter quick- systems - or when extreme long hoses is needed.
release coupling tail hose and has a build-in start/
stop trigger that the operator activates directly on the
driver. The LPD-RV is supplied with a 2-meter long tail

Post drivers LPD-LD LPD-T LPD-RV LPD-HD-T LPD-HD-RV

Activation type By trigger lever By remote valve By trigger lever By remote valve

Hydraulic system Open centre Open-centre

or closed- Open centre Open- or closed-
centre
Weight (incl hoses) kg 32 33 39 40
Service weight (with square adaptor, 54 mm) kg 34 1) 35 1) 45 2) 46 2)
Oil flow l/min 20-30 20-30 28-40 28-40
Working pressure bar 105-140 105-140 105-125 105-125
Impact rate at 30 l/min blows/min 1680 1680 1320 1320
Hydraulic ports BSP BSP BSP " BSP
Vibration level 3 axes (ISO 28927-10) 20 lpm 3) m/s 12,8 - 20,1 -
Sound power level guaranteed (2000/14/EC), Lw 3) dB(A) 115 115 118 118
Sound pressure level (ISO 11203) 3) Lp, r=1m dB(A) 102 102 105 105
EHTMA class C/D C/D D/E D/E
Part number 1801 4040 02 1801 4050 02 1801 4140 00 1801 4150 00
1)
With square adaptor, 54 mm
2)
With anvil rod and head, 148 mm
3)
Important: Full details of measurement is available in the Safety and Operating Instruction of the product (part no 3392 5036 01). It can be found on www.
acprintshop.com

12
POST DRIVER ADAPTORS POST PULLER POST HOLE BORER
The Atlas Copco post puller is used by road- Compact and powerful, this tool drills holes in hard soil
maintenance contractors to remove damaged crash and sand of up to 1.3 meter in depth and 90-350 mm in
barriers and road signs. With hardened jaws and an diameter. It offers reversible rotation and is designed for
automatic chain-tightening clamp, this post puller two-person operation. All augers have interchangeable
is ideal for removing all kinds of wooden or steel bits for increased service lifetime. The auger is ideal for
posts including IPE, HPE, UPE proiles and round/ fencing and tree planting. Featuring two-way operation
Adaptors for LPD-T and LPD-RV
square steel tubes. This post puller develops 6 tons of and with adjustable torque settings, the tool can also
Shape Description Part number
hydraulic pulling force. With the help of a separate be used to open and close main water line valves, for
Universal 3371 8060 33
hand lever (optional), you can boost the pulling force example, with the help of special adaptors.
Round 96 mm 3371 8060 34
Square 54 mm 3371 8060 32 by an extra 4 tons to loosen any poles that are ixed
into place with ease. Weighing just 60 kg, it is the most
compact and portable pulling device
on the market perfect for on-site road
repairs that cannot be accessed by heavy
vehicles with a 10-ton crane.
Solid adaptors for LPD-HD-T and LPD-HD-RV
Shape Description Part number Handheld post hole borer LPHB
Round For 6.0 in. tubes and 140 mm poles 3371 8060 52 Post puller LPP 10 HD Weight kg 20
Round For 135-145 mm tubes 3371 8060 53 Service weight (incl 200 mm auger) kg 30,5
Round For 105-115 mm tubes 3371 8060 54 Service weight (incl hoses and chain) kg 60
Oil flow l/min 15-40
Round For 150 mm poles 3371 8060 55 Oil flow l/min 20-40
Working pressure bar 80-140
Working pressure bar 100-160
Max back pressure bar 50
Max back pressure bar 30
Revolutions rpm 90-240
Lift capacity per stroke mm 12-200
Auger size diameter mm 90-350
Pulling force kg 6000
Torque (at 140 bar) Nm 315
Full pulling force kg 10000
Guide adaptors for LPD HD-T and LPD HD-RV EHTMA class C/D/E Vibration level 3 axes (ISO28927-5) 20 lpm 1) m/s 7,4
Part number 1801 8100 03
Shape Description Part number Sound pressure level (ISO 11203) 1) Lp, r=1m dB(A) <70

Rectangular For IPE/Sigma/C 100 mm beams 3371 8060 45 EHTMA class C/D/E
Rectangular For IPE/C 120 mm beams 3371 8060 46
Part number 1806 1014 33
Round For 2.5 in. tubes and 70-75 mm poles 3371 8060 47
Important: Full details of measurement is available in the Safety and
1)
Round For 3.0 in. tubes and 80-85 mm poles 3371 8060 48 Operating Instruction of the product (part no 3392 5115 01). It can be
Lever kit found on www.acprintshop.com
Round For 3.5 in. tubes and 95-100 mm poles 3371 8060 49
Round For 4.0 in. tubes and 105-110 mm poles 3371 8060 50 Weight Kg 10
Round For 5.0 in. tubes and 125-135 mm poles 3371 8060 51 Part number 3371 8101 48

13
 POWER PACKS

You choose: petrol, diesel or

electric-driven power packs
These well-proven power packs are the ideal power Efficient cooling
source for a wide range of applications in the 20- The thermostatically-controlled oil cooler allows quick
40 lpm/170 bar range. Light and compact, with well warm-ups and helps protect the hydraulic oil from
protecting frames, they are easy to store and transport. overheating. Correct working temperature is achieved
Equipped with wheels and handles, they are easy to within minutes even during the winter.
move around construction sites.

Reduces fuel consumption and noise

Many of the power packs are equipped with Power
On Demand (POD). This hydraulic regulatory system
automatically idles the engine when the tool is not
being used, and then speeds it up when the tool is re-
activated.
FOLDABLE HANDLE
One person can move power packs around site
with ease.

ON/OFF VALVE
The variable flow on/off valve allows for easy
tool change and slow start-up.

FILTER INDICATOR
All power packs feature a large, easy-to-
read filter gauge that indicates when its
time to change the filter.

14
 PETROL DIESEL ELECTRIC
LP 9-20 P 2) LP 13-30 P 2) LP 18-30 PE LP 18-40 PE LP 18 Twin PE LP 13-20 DEL LP 9-20 E LP 18-30 E LP 18-40 E LP 18 Twin E
Engine Honda GX 270 Honda GX 390 B&S Vanguard B&S Vanguard B&S Vanguard Lombardini LD 440
Power kW (hp) 6,6 (9) 9,5 (13) 13,2 (18) 13,2 (18) 13,2 (18) 7.4 (10) 5.5 11 11 11
3x400 V / 16A 3x400 V / 32A 3x400 V / 32A 3x400 V / 32A
Weight (incl oil) kg 76 91 118 118 123 116 68 130 130 135
Dimensions (LxWxH) mm 605x505x620 745x600x705 790x605x690 790x605x690 755x700x720 745x600x705 605x505x620 815x605x690 815x605x690 745x605x705
Oil flow l/min 20 20-30 20-30 20-40 2x20/1x40 20 20 30 40 2x20/1x40
Max pressure bar 150 150 170 145 145 150 150 170 155 155
Fuel capacity l 6 6,5 8,5 8,5 8,5 5 - - - -
Hose included YES YES NO NO NO NO NO NO NO NO
Power on Demand (POD) YES YES NO NO YES NO NO NO NO NO
Oil control: engine oil YES YES YES YES YES NO NO NO NO NO
Electric start NO NO YES YES YES YES YES YES YES YES
Sound power level guaranteed
(2000/14/EC) 4) Lw dB(A) 101 101 101 101 101 - 101 101 101 101
Sound pressure level (ISO 11203) 4) Lp, r=1m dB(A) 87 89 99 99 88 - 82 86 86 86
EHTMA class C C/D C/D C/D/E C/E C C D E C/E
Part number 1807 0080 44 1807 0110 12 1807 0160 41 1807 0160 38 1807 0160 16 - 1807 0080 46 1807 0160 43 1807 0160 42 1807 0160 22

Non-CE noise approved versions

Part number 1) 1807 0080 45 1807 0110 23 - 1807 0160 40 1807 0160 32 1807 0110 20 - - - -
1)
Not sold within EU
2)
Extension twin-hose comes as standard with LP 9-20 P and LP 13-30 P
3)
LP 13-30 P, LP 13-20 D, LP 18 Twin E: With stainless steel frame
4)
Important: Full details of measurement is available in the Safety and Operating Instruction of the product. It can be found on www.acprintshop.com

15
ACCESSORIES

POWER PACK BIO-OIL

Each power pack comes with two 4-litre bottles of Atlas 4 litre
Copco biodegradable oil, enough for illing the power pack Size l 4
and a 7-metre hose. Part number 3371 8077 51

OIL-FLOW DIVIDER LFD 20 LFD 30

The oil-low divider allows you to run tools from hydraulic
Max oil flow rate l/min 60 120
powered carriers by reducing low and pressure. An Regulated oil flow rate l/min 20 1) 30 2)

3392 5235 01 Copyright 2011, Atlas Copco Construction Tools AB, Stockholm, Sweden Subject to technical modifications.
extension hose is required to connect the divider to the HTMA Type C D
Part number 1801 1632 29 1801 1642 32
tool.
Can be adjusted between 20-25 l/min
1)

Can be adjusted between 25-38 l/min

2)

EXTENSION HOSES
By adding one or two 7-m extension hoses you can use up 7m 12 m
to 21 m of hose with no signiicant drop in pressure. The Length m 7 12
hoses are light and lexible and are itted with lat-face, Couplings: dimension 1/2 1/2
flat face quick release
quick-release couplings. (A 7 m extension hose comes as EHTMA class C/D/E C/D
standard with LP 9-20 P and LP 13-30 P). Part Number 3371 8010 87 3371 8010 89

WATER KIT
Water kit with
Diamond blades and core bits need a small but constant pressure tank
supply of water to lush away slurry and to repress dust. Size (W x H x D) mm 220 x 620 x 250
Where water is available, taps can be used and water low Water volume l 10
can be regulated on the tool. On remote sites where there is Weight kg 8
Water supply for LCD core-drill
no water supply, we recommend the Atlas Copco water kit, Comments and LS cut-off saw
a small pressurised water container. Part number 3371 8090 02

www.atlascopco.com