D11T/

D11T CD
Track-Type Tractor

Engine Operating Weight CD 113 000 kg 248,600 lb

Engine Model Cat C32 ACERT

Shipping Weight CD 75 455 kg 166,000 lb
Flywheel Power 634 kW 850 hp Operating Weight: Includes lubricant, coolant, full fuel
Weights tank, hydraulic controls and fluids, 910 mm (36 in) extreme
Operating Weight 104 590 kg 230,100 lb service shoes, 11 carrydozer, single-shank ripper
(optional equipment) and operator.
Shipping Weight 74 418 kg 163,200 lb
Shipping Weight: Includes lubricants, coolant, 20% fuel,
Operating Weight: Includes lubricant, coolant, full fuel and ROPS with FOPS cab.
tank, hydraulic controls and fluids, 810 mm (32 in) extreme
service shoes, 11U ABR bulldozer, single-shank ripper
with pin puller and fast fuel, engine doors (optional
equipment) and operator.
Shipping Weight: Includes lubricants, coolant, 20% fuel,
and ROPS with FOPS cab.
D11T/D11T CD Track-Type Tractor
Strength from the past. Power for the future. The D11T/CD combines power and efficiency
with advanced technology for outstanding production at a lower cost-per-yard.

C32 with ACERT Technology Cooling System Implement and Steering Controls
ACERT Technology works at the The Advanced Modular Cooling System Electro-hydraulic implement controls
point of combustion to optimize engine (AMOCS) combines higher cooling allow low operator effort for dozing
performance and to provide low exhaust capacity with easier servicing. AMOCS and ripping. Steering and gear selection
emissions. Matched with the torque allows the machine to be operated in the in a one-hand control system enhances
divider and power shift transmission, most demanding environments with less operator comfort. pg. 7
it provides years of dependable and downtime. pg. 6
efficient service. pg. 4

Undercarriage Work Tools

The proven elevated sprocket Various bulldozer blades, rippers,
undercarriage isolates the drive train winches, and other options allow
components from ground-induced you to adapt the D11T to match your
impacts. The suspended undercarriage specific application, making you more
puts more track on the ground for productive. The CarryDozer blade
higher traction and less track slip. can handle larger loads to maximize
It absorbs shocks for a smoother ride productivity. pg. 13
and longer machine life. pg. 12

Engineered for demanding work.

The durable construction of the D11T is

well suited for tough working conditions.
Combined with the Cat C32 ACERT
engine for superior performance, fuel
economy and meeting emission targets, it
keeps material moving with the reliability
and low operating costs you expect from
Cat tractors.

2
 Operator Station Drive Train Structure
Designed for operator comfort, The electronically controlled power Mainframe is heavy, strong and durable.
convenience, and productivity. Machine shift transmission, efficient clutch/brake Full box sections, steel castings and
control and vital information is provided steering and durable planetary final drives continuous rolled rails provide durable
at the operators fingertips. A full day deliver outstanding power transfer and support to the suspended undercarriage,
of work is no problem in this efficient long life to ensure maximum productivity. elevated final drives and other integral
work place. pg. 8 pg. 10 frame components. pg. 11

Safety Serviceability and Customer Support

Caterpillar has been and continues Combining easy-to-access, modular
to be proactive in developing machines components with your Caterpillar
that meet or exceed safety standards. Dealers advanced rebuild and repair
Safety is an integral part of all machine capabilities ensure rapid component
and systems designs. pg. 14 replacement and minimum downtime.
pg. 15

New Feature

3
C32 with ACERT Technology
A combination of innovations working at the point of combustion, ACERT Technology
optimizes engine performance while meeting EPA Tier 2 and EU Stage II engine exhaust
emission regulations for off road applications.

C32 Engine. Performing at full rated net Overhead Cams. Two, single (one per ADEM A4 Engine Controller.
power of 634 kW (850 hp) at 1,800 rpm head) overhead cams are driven by The ADEM A4 electronic control
with a high torque rise of 21 percent, the gears on the flywheel end of the engine. module manages fuel delivery and air
large displacement and high torque allow Placing the cam gears at the flywheel flow to get the best performance per
the D11T to doze through tough material. end significantly reduces noise and gallon (liter) of fuel used. It provides
Matched to the high efficiency torque vibration. To reduce wear, two pendulum flexible fuel mapping, allowing the
divider and electronically controlled absorbers are mounted at the front of the engine to respond quickly to varying
power shift transmission, it will provide camshafts. Together, these two features application needs. It keeps track of engine
years of dependable service. contribute to the long-life and durability and machine conditions while keeping
of this engine. the engine operating at peak efficiency.
C32 Block. The block features a
design that adds structural strength Fuel Delivery. Multiple injection
through compaction and thicker walls. fuel delivery involves a high degree
This design supports the engines of precision. Precisely shaping the
higher compression ratios. combustion cycle lowers combustion
chamber temperatures, generating
fewer emissions and optimizing fuel
combustion; translating into more
work output for your fuel used.

4
MEUI Fuel System. A highly evolved fuel
system with a proven record of reliability
in the field. MEUI combines the technical
advancement of an electronic control
system with the simplicity of direct
mechanically controlled unit fuel
injection. The MEUI system excels in
its ability to control injection pressure
over the entire engine operating speed
range. These features allow the C32 to
have complete control over injection
timing, duration, and pressure.
ATAAC and Airflow. Air-to-air
aftercooling keeps air intake
temperatures down and, in concert with
the tight tolerance combustion chamber
components, maximizes fuel efficiency
and minimizes emissions. Significant
improvements in air flow are generated
by water-cooled turbochargers, unique
cross-flow head, single rear-driven
overhead cams, and a more efficient Aluminum Spacer. Located between Components have longer life. Because
intake manifold. the block and head to eliminate the oil-cooled pistons and full-length, water-
need for block counterbores, and cooled cylinder liners provide maximum
Engine maintenance and repair. extend block life. heat transfer. The cylinder heads also
Is easier through monitoring key
utilize additional coolant passages to
functions and logging critical indicators. Hardened-faced valves. Through-
provide maximum cooling to the engine.
Electronic diagnostic access is possible hardened crankshaft journals and steel-
with the Electronic Technician (Cat ET). backed, copper-bonded aluminum
bearings, help assure reliable performance
in the toughest duty.

5
Cooling System
Superior cooling in the most demanding work conditions.

Hydraulically Variable, Demand Fan.

The hydraulically driven demand fan
provides engine cooling capability that
is matched to the ambient conditions.
In cooler conditions, the fan turns at a
slower speed, reducing power demands.
This frees up more power in high load
factor operations or reduces fuel
consumption in lower load factor
operations. Low speed fan operation
also reduces both operator and spectator
sound levels. The ADEM A4 engine
controller regulates the fan speed
through a variable displacement pump.
An attachment low speed option is
available for cold weather operations
to avoid over cooling the engine.
Easy Serviceability.
Servicing of the AMOCS can
be performed without tilting the
radiator guard
No need to remove or replace a
major component as on single-core
radiators
Each core module can be replaced
individually (without removing the
entire radiator), saving considerable
cost and repair time

Two-pass cooling system. Using a Modular Design. The cooling elements

two-pass system, the AMOCS radiator are individual core modules connected
provides a more efficient heat exchange. to a sectioned bottom tank. There is
The coolant is routed from a sectioned no top tank to remove.
bottom tank up the front side, over the
Standard 9.4 steel fins per 2.54 cm
top of the core, and down the engine
(1 in), or an optional 6 steel fins per
side of the core to the bottom tank.
2.54 cm (1 in)
This flow pattern allows the coolant
to pass through the radiator twice Brass tube construction within each
for better cooling. core for improved reliability

6
Implement and Steering Controls
Low effort control functions significantly reduce operator fatigue for increased performance.

Computer Aided Earthmoving System

(CAES) (optional). Computer Aided
Earthmoving Systems (CAES) replace
conventional surveying with advanced
GPS and radio communications
equipment, improving operators
accuracy and efficiency. CAES can
communicate back and forth with the
office and access site design plans.
Office software can generate designs on
the fly and provide customized production
and design reports. CAES gives operators
continuous, interactive access to machine
Ripper Control Lever. A rigidly mounted
and operating information right in the
handgrip provides firm support for
Dozer Control Lever. A low-effort cab so they have the tools they need
the operator even when ripping in the
electronic dozer control handle gives the to operate with more precision and
roughest terrain. The low effort thumb
operator control of all dozer functions predictability. An in-cab display gives
lever controls raising and lowering.
with one hand. Fore/aft movement of operators easy-to-understand color
The finger lever controls shank-in and
the lever lowers and raises the blade. diagrams of where to cut and fill.
shank-out positioning. The thumb
Left/right movement directionally tilts With CAES, the effort of reading maps
button automatically raises the ripper.
the blade. or looking for grade stakes is virtually
eliminated. And because it gives
The thumb lever at the top of the immediate, accurate feedback, operators
handle, controls blade pitch fore and aft. can doze quickly, accurately and
The trigger switch pitches the blade confidently. CAES helps identify ways
forward to dump the load. to reduce errors and constantly improve
The two thumb buttons to the left of the the production process ultimately
implement control provide control over helping reduce cost.
the semi-automated blade pitch functions AutoCarry (optional). AutoCarry provides
that Dual Tilt provides. Blade pitch for automatic blade control (raise and lower
load, carry and spread segments can only) during the carry segment of the Finger Tip Controls (FTC). Clustered for
be preset on Advisor and controlled by dozing cycle. Drawbar pull, ground easy, one-hand operation to the operators
the buttons. The left side button cycles speed, track slip, and machine attitude left. They control steering, machine
between the pitch settings for each are integrated to control track slip and direction and gear selection.
segment of the push cycle. The right maintain optimal blade loads. AutoCarry
side button cancels out of the pitch is intended to enhance the operators Electronic Clutch and Brake (ECB)
functions without losing the preset pitch productivity in high production steering System consists of two small
angles. This Auto Blade Assist (ABA) earthmoving with carry distances over levers that send signals that control the
feature is turned on and off using a 30.5 m (100 ft). By monitoring ground steering valve. Levers require less than
switch on the right side console. speed with the belly-mounted radar gun, three pounds of pull to actuate. Steering
the auto carry system controls blade is accomplished in much the same way as
load to maintain approximately 2.4 km/h traditional clutch and brake arrangements,
(1.5 mph) true ground speed. Track slip but with less time and effort.
is monitored and limited to under 16%.
Readouts of the true ground speed and
track slip are available in the AutoCarry
menu on Advisor. Through the systems
Dynamic Inclination Sensor (DIS),
readouts of the tractor pitch angle and
side-to-side scope are also available
on Advisor.

7
Operator Station
Designed for operator comfort, convenience, and productivity, the state-of-the-art cab sets
a new standard.

6
1

5
3

4
2

8
1) Steering Control. Finger Tip Control 6) Cat Monitoring Display System.
(FTC) combines steering, machine The combination dash mounted
direction and gear selection into a single instrument cluster and the Advisor
control system, operated with one hand Monitoring System provide key
for enhanced operator comfort. machine operating data and give the
operator and service technician insight
2) Cat Comfort Series Seat.
into the machines operation and
Fully adjustable and designed for
maintenance needs.
comfort and support. Thick seat and
back cushions provide support for the In-Dash Instrument Cluster.
lower back and thighs, while allowing The instrument panel, with easy-to-read
unrestricted arm and leg movement. gauges and warning lamps, keeps the
Wide retractable seat belt provides operator aware of any potential problems.
positive, comfortable restraint. All gauges and readouts are easily
visible in direct sunlight.
3) Adjustable Armrests. Standard
adjustable armrests provide additional Advisor Monitoring System (AMS).
comfort for the operator. On-board diagnostic abilities minimize
downtime and maximize machine
performance.
7) Wide Panoramic View. The operator
station offers an exceptional viewing
area. A large view hole in the single- Fuse Panel and Diagnostic Access.
shank ripper frame provides a view The new compartment features a single
of the ripper tip. The tapered hood, location fuse panel that includes a
notched fuel tank, and narrow single- diagnostic port for the Cat ET to connect
shank ripper carriage gives the operator for rapid machine diagnostics.
a clear line of sight to the front and rear Comfortable Operation. Standard
work areas. The large single-pane door isolation-mounted cab reduces noise
windows provide an excellent view and vibration. The cab is pre-wired
4) Electronic Ripper Control. A rigidly to the sides and blade. for a 12-volt or 24-volt radio, equipped
mounted handgrip, with low effort 8) Heating and Air Conditioning. with two speakers, an antenna and a
thumb and finger controls, provides Conveniently located air circulation radio mount recessed in the headliner.
firm support and positive control of vents evenly distribute airflow within Footpads. Two footpads, mounted on
the ripper when operating in tough the cab. Controls are easily accessible the floor and wide, sweeping stabilizer
conditions. Programmable features, from the operator seat. pads keep the operator comfortable and
such as Auto Lift, Shank-Out and Auto
High Intensity Discharge Lights (HID). in control while working on slopes.
Stow, increase operator efficiency.
High Intensity Discharge lighting Other Features. Built-in storage space
5) Electronic, Programmable Dozer packages are standard to enhance with tie downs for lunch box or other
Control. Features such as blade response, visibility when 24 hours operations personal items.
blade float, auto blade pitch, and spread are required. The HID lights are bluish
rate can be set and adjusted using the in color and offer less glare while Ashtray and cup holder.
Advisor panel. Auto Blade Assist significantly extending the sightlines Inside door releases.
(standard) and AutoCarry (optional) around the tractor.
make the tractor even more efficient Power point plug-in on the right
in specific applications. hand console (12-volt laptop and
wireless phone compatible).

9
Drive Train
The D11T/CD provides maximum efficiency in combination with the Cat C32 engine.

Torque Divider. A single-stage torque Modulation system permits fast Thick, large diameter plates and
converter with output torque divider speed and direction changes. disks provide high torque capacity
sends 75 percent of engine torque and service life.
Modular transmission and bevel
through the converter and 25 percent
gear slide into rear case for servicing Brake housing has cast-in-ribs
through a direct drive shaft for greater
ease, even with ripper installed. for more durability and a new
driveline efficiency and higher torque
valve design.
multiplication. The torque converter Oil-to-water cooler for maximum
shields the driveline from sudden torque cooling capacity. Cooling oil valve controls 284 L
shocks and vibration. (75 gal) of oil per minute.
Forced oil flow lubricates and cools
High Torque Multiplication. The more clutch packs to provide maximum Clutch disks allow greater torque
efficient and better matched torque clutch life. capacity on the clutch.
converter provides high drawbar pull
Controlled throttle shifting regulates Tapered roller bearing design
reserves at converter stall. High torque
engine speed during directional provides excellent service life.
multiplication gets heavy loads moving.
shifts for smoother operation
D11T/D11T CD Drawbar Pull
Elevated Final Drives. Isolated from and longer component life.
kg x lbs x
ground and equipment induced impact 1000 1000
Size of bevel group unit increased 350
loads for extended power train life. 150
for higher torque. 140
300
Double-reduction, planetary final 130
Electronic Clutch Pressure Control. 120
drive gears provide smooth, quiet, 1st Gear
The Finger Tip Control (FTC) system 110
250

low-maintenance operation.
has an additional drive train feature for 100

Drawbar Pull
90 200
Splash lubrication and Duo-Cone added performance, Electronic Clutch 80

Seals extend service life. Pressure Control (ECPC). This feature 70

150
60
provides smoother shifting by modulating 2nd Gear
Gears and planet carriers are sized 50
individual clutches. ECPC also provides 40
100

for higher loads and increased 3rd Gear

the auto-shift and auto-kickdown feature. 30
durability. 20 50

Auto-Shift/Auto-Kickdown. Auto-shift 10
Axle and spline have been enlarged 0 0
allows the operator, by just making a 0 1 2 3 4 5 6 7 8 mph
for higher torque.
directional change, to go from first
forward to second reverse. 0 2 4 6 8 10 12 km/h

Machine Speed
Auto-kickdown automatically downshifts
the transmission when significant load Drawbar Pull vs Ground Speed.
increases are detected. These features As loads on the tractor increase,
are especially useful in backfilling or the D11T offers unmatched lugging
rough grading applications or with a capability and smooth shifting as the
less skilled operator. Depending on need occurs to change gears under
application, operators can select auto- varying loads. The 3-speed forward,
shift mode only, auto-shift and auto- 3-speed reverse transmission offers
kickdown mode, auto-kickdown mode excellent runout speeds.
only, or manual mode. The operator Modular Power Train. The modular
may override these automatic shift power train design permits quick
features at any time. removal and installation of major
D11T Brakes. The brakes are applied by components such as the engine,
Planetary Power Shift Transmission.
springs and hydraulically released for transmission and final drives.
Three speeds forward and three speeds
reverse, utilizing large diameter, high- safe and reliable braking performance.
capacity, oil-cooled clutches.

10
Structure
Engineered to provide durability and the solid support necessary for maximum production
and service life in the most demanding work.

Mainframe Strength. The D11T and

D11T CD mainframes are built to
absorb high impact shock loads and
twisting forces of severe dozing and
ripping. The two frames share the
following features:
Frame Rails. Full box section design
keeps components rigidly aligned.
Heavy Steel Castings. Strengthen the
main case, equalizer bar saddle, front
cross member and tag-link trunnion.
Top and Bottom Rails. Made from
continuous rolled sections to eliminate
welds and machining, which provide
superior mainframe durability.
Main Case. Elevates the final drives well
above the ground level work area to
protect them from impact loads, abrasion
and contaminants. Also provides support
for the ROPS and ripper mounting.
Pivot Shaft. The pivot shaft and pinned
equalizer bar maintain track roller frame
alignment.
CarryDozer Frame. The CarryDozer
Case and frame design. Features one-
frame is specifically designed for
piece cast case with ripper and ROPS
the carrying material long distances.
mounting. Oil reservoir included in
The taller front end accepts additional
one-piece cast casting.
frame loads generated by the unique
Heavy cast saddle. Ribbed design CarryDozer blade design.
Tag-Link. Reduces wear and brings the
increases frame life.
blade closer to the machine for more
Engine and Radiator Guard Mount. precise dozing and load control.
The new fabricated common front
The Tag-Link design provides solid
engine and rear radiator mount feature
lateral stability and better cylinder
heavy castings.
positions for constant break out
force, independent of blade height.

11
Undercarriage
The Caterpillar elevated sprockets are designed for better machine balance and longer
component life.

Suspended Undercarriage Design. Positive Pin Retention (PPR) Sealed and

Absorbs impact loads to reduce the shock Lubricated Track. Permanently coats
loads transferred to the undercarriage by the track pin with a sealed-in lubricant,
up to 50 percent in uneven terrain. minimizing metal-to-metal contact.

Bogie suspension conforms closely to Integrated Carrier Roller Mount. Virtually eliminates internal pin
the ground. Providing up to 15 percent The carrier roller mount is cast into and bushing wear.
more ground contact, especially in hard, the track roller frame making it easier Lubricant is held in a reservoir
uneven terrain. Higher traction means to add the optional carrier roller in in the track pin.
less slippage, better balance, and a the field, if conditions require it.
smoother ride. Coated track bushing maximizes
Reinforced Roller Frames. Tubular design sealability.
Sprockets. Have five bolt-on replaceable resists bending and twisting, with added
rim segments of abrasion resistant tough reinforcement where operating loads Stronger track link resists high
steel for long wear life. are highest. impact loads.

Equalizer Bar. End pin bearings are oil Roller frames attach to tractor by a Positive pin retention mechanically
lubricated from a remote reservoir for pivot shaft and pinned equalizer bar. locks the link to the pin, resisting
easy maintenance and longer life. end play and increasing joint stability.
Large pivot shaft bushings operate
Rollers and Idlers. Feature symmetric in an oil reservoir. Sprocket Segments. Made exclusively
Duo-Cone seals for long sealing life to of Caterpillar Tough Steel for longer
A low friction, no maintenance wear life and precision machined after
prevent oil loss and dirt entry. Toric rings
bushing is used in the saddle heat treat for proper fit. Segments can
maintain performance over a wide range
connection. be removed or replaced without
of temperatures. Rollers and idlers are
serviceable and rebuildable to provide Resilient pads restrain equalizer breaking the track.
value. Abutment-style caps securely bar oscillation. Track Shoes. Track shoes are available
attach rollers and idlers to the bogies. in a variety of sizes and styles to match
The recoil system is sealed and
lubricated. the working conditions.

Patented alignment design increases

undercarriage wear life.
Idler guards (optional) increase
undercarriage life in abrasive
applications.
Track adjustment provided to
120 percent undercarriage wear limit.

12
Work Tools
Work Tools and Ground Engaging Tools (G.E.T.) provide the flexibility to match the machine
to the job, maximizing performance.

High-Capacity Universal Blade. Single-Shank Ripper. Operator can

Offers maximum capacity and is perfect adjust the shank depth from the seat
for moving big loads over long distances. using an optional single-shank pin puller.
The U blade has large blade wings and Large upper frame view hole improves
is ideal for stockpile work, reclamation, ripper tip visibility. Heat treated spacer
charging hoppers or trapping for loaders. bars in ripper carriage extend pocket life
and reduce shank notching. Large one-
CarryDozer Blade. The CarryDozer
piece shank is available in deep ripping
carries material inside the blade curvature,
configuration.
rather than pushing it. This carried
material increases the effective weight of
the tractor, enabling larger loads in front
of the blade and enhancing operation on
steeper uphill slopes. These two effects
combine to maximize productivity.
Bulldozers. All blades feature a strong
box-section design that resists twisting Abrasion Versions. The abrasion
and cracking. Blades are made of versions of the SU blade and U
Cat DH-2 steel that has high tensile blade extend blade life in more severe
strength and stands up to the most applications. Abrasion blades are
severe applications. Heavy moldboard equipped with rock guards, wear plates
construction and hardened bolt-on and extended wear life cutting edges
cutting edges and end bits add strength and end bits.
and durability. Dual Tilt. Improves load control and
Semi-Universal Blade. Built for tough allows the operator to optimize the
applications where penetration is more blade pitch angle for each portion Multi-Shank Ripper. Tailors the tractor
important than capacity. The SU blade of the dozing cycle. to the material by using one, two or
is more aggressive in penetrating and Single Lever. Controls all blade three shanks.
loading material than the U blade. movements, including the optional Hydraulic Pitch Adjustment Cylinders.
The blade wings are designed for dual tilt. Hydraulic pitch adjustment cylinders
superior load retention and penetration vary the shank angle to get the best
in tightly packed materials and for Cutting Edges and End Bits. Cutting edges
are made of DH-2 steel. End bits are made penetration so the material is lifted
finishing applications. Can also be and shattered.
configured with a push plate for of DH-3 steel to provide maximum
push loading scrapers. service life in tough materials. Rear Counterweights. Provide proper
Rippers. Single and multi-shank rippers tractor balance to maximize dozing
are made to penetrate tough material production. Recommended if not
fast and rip thoroughly for use in a equipped with any other rear attachment.
variety of materials.

13
Safety
Caterpillar mining machines and systems are designed with safety as the first priority.

Product Safety. Caterpillar has been and Access/Egress. Wide opening cab doors Electrical System Lockout/Tagout.
continues to be proactive in developing provide both primary and secondary A disconnect switch is available to
mining machines that meet or exceed access/egress from the cab. Primary and shut off all machine electrical power.
safety standards. Safety is an integral secondary access are via the platform Another disconnect switch shuts off
part of all machine and systems designs. outside the cab doors and the track, power to the starter, while keeping
using strategically placed grab irons main power available for diagnostics
ASE and ISO Standards. The D11T/
and steps. An attachment rear walkway and troubleshooting.
CarryDozer is designed to many national
[with 1987 L (505 gal) fuel tank] is
and international standards. Lighting. Standard HID lighting provides
available to provide a means of cleaning
superior illumination around the machine
ROPS and FOPS. The external ROPS/ the rear and side windows and provides
for night operations. The 35 watt HID
FOPS structure is designed to carry maintenance access to the rear lights.
lamps provide lighting equivalent to
loads directly into the tractor main An attachment, hydraulically actuated,
4 Halogen lamps, without producing
frame and protect the operator. access ladder is available, separately,
significant glare. Multiple switches in the
for applications where wet or freezing
cab allow segregation of specific lamps
material would make access/egress
in the event that the tractor is working
via the tracks more challenging.
near other machines. Two under-hood
service lamps illuminate the engine
compartment for easy night service.
The fender light switch can be left in
the on position when the ignition key
is turned off. The fender lights will stay
on for a pre-timed period to allow the
operator to egress the machine at night.
The fender lights will automatically
turn off after 10 minutes.

Visibility. An attachment WAVS rear SAFETY.CAT.COM.

vision camera is available to provide
additional visibility to the standard
mirrors.

14
Serviceability and Customer Support
The most serviceable machines from the most committed dealers. World-class product
support. The Cat Dealer network trained experts keep your fleet up and running, maximizing
your equipment investments. Caterpillar. The difference counts.
Quick Disconnect Fittings. Allow for fast Product Support. Plan for effective
diagnosis of the power train, hydraulics maintenance before buying equipment.
and attachment oil systems. Choose from your dealers wide range
of maintenance services at the time you
SOSSM Analysis. Scheduled Oil Sampling
purchase your machine. Programs such
made easier through live sampling ports
as Custom Track Service (CTS),
for the engine oil, hydraulics and coolant.
SOS analysis, Technical Analysis
and guaranteed maintenance contracts
give peak life and performance
to your machine.

Serviceability. Minimizes maintenance

and repair downtime. New sight gauges,
filter locations, improved access to oil
and coolant sampling ports, and an engine
compartment mounted work lamp,
make daily and periodic service faster
and easier. Equipped with a dozer and
ripper, there are only 18 lube points. Caterpillar Product Link PL300 (optional).
This option allows the customer or
Built-in Servicing Ease. Less service dealer to obtain machine diagnostics
time means more working time. and location information from their
Major components are made as Parts Program. You will find nearly
offices. Product Link PL300 provides
modules and most can be removed all parts at your dealer parts counter.
updates on service meter hours, machine
without disturbing or removing others. Cat Dealers use a world-wide computer
condition and machine location, as well
network to find in-stock parts to minimize
Heater and Air Conditioner Cores. as integrated mapping/route planning.
machine downtime.
Accessible without disconnecting heater Built-in flexibility allows for future
and air conditioner cores are accessible technology development. Ask about your Cat Dealers exchange
without disconnecting lines. A diagnostic program for major components. This can
Machine Selection. Make detailed
connector allows the Cat Dealers shorten repair time and lower costs.
comparisons of the machines you are
electronic test instrument to quickly considering before you buy. How long Remanufactured Components.
troubleshoot the electrical portions do components last? What is the cost Genuine Cat Remanufactured parts
of these systems. of preventive maintenance? What is the save you money. You receive the same
Ecology Drains. An environmental true cost of lost production? Your Cat warranty and reliability as new products
method to drain fluids. They are included Dealer can give you answers to these at cost savings of 40 to 70 percent.
on the radiator, hydraulic tank, fuel very important questions. Components are available for the
tank, torque divider and transmission. drive train, engine, and hydraulics.
Purchase. Consider the financing
Engine Oil Filters. Engine oil filters options available as well as day-to-day Operation. Improving operating
are located on the engine for easy operating costs. This is also the time techniques can boost your profits.
servicing access and minimal downtime. to look at dealer services that can be Your Cat Dealer has training videotapes,
Further time is saved with fast fuel and included in the cost of the machine literature, and other ideas to help you
quick oil change attachments. to yield lower equipment owning and increase productivity.
operating costs over the long run.
Replacement. Repair, rebuild or replace?
Your Cat Dealer can help you evaluate
the costs involved so you can make
the right choice.

15
 Features
Engine
Meets EPA and CARB emissions requirements for 2006
Engine Model Four-stroke cycle, V12, Single piece design for outstanding structural rigidity
Cat C32 Diesel Engine Mechanical Electronic Unit Injection (MEUI) and ADEM A4
Gross Power 698 kW 935 hp allows variable injection timing and controls the quantity
Flywheel Power 634 kW 850 hp of fuel
Twin wastegate turbochargers provide higher boost over a
Net Power Caterpillar 634 kW 850 hp
wider range that will improve engine response, outstanding
Net Power ISO 9249 634 kW 850 hp low end performance and improved peak torque
Net Power ISO 3046-2 634 kW 850 hp
Forged steel design piston provides higher strength, lighter
Net Power EEC 80/1269 634 kW 850 hp weight, better oil control, and less liner wear
Bore 145 mm 5.71 in Cylinder liners are hardened plateau honed to reduce wear,
Stroke 162 mm 6.38 in reduce blow-by and improve oil control and consumption
Displacement 32.1 L 1,959 in3 Leak free design by improving joints throughout the
Engine ratings apply at 1,800 rpm. engine and all fluid connections using the standard
Based on standard conditions of 25 C (77 F) thread O ring design
and 99 kPa (29.32 in. Hg) dry barometer.
Used 35 API gravity fuel having an LHV of 42 780 kJ/kg
(18,390 Btu/lb) when used at 30 C (86 F) [ref. a fuel density
Final Drives
of 838.9 g/L (7.001 lb/U.S. gal)].
Double-reduction planetary final drive gears with tapered
Net power advertised is the power available at the flywheel roller bearings.
when the engine is equipped with fan, air cleaner, muffler,
Features
and alternator.
No derating required up to 2286 m (7,500 ft) altitude, beyond Splash lubricated and sealed with Duo-Cone floating
2286 m (7,500 ft) automatic derating occurs. ring seals
Sprockets have five bolt-on, replaceable rim segments
D11T/D11T CD Drawbar Pull with more bolts to resist high impact loads
kg x lbs x Eliminate ground and implement induced impact loads
1000 1000
350
for extended power train life
150

140 Abrasion-resistant steel increases sprocket segment

300
130 wear life
120

110
250 1st Gear
100
Drawbar Pull

90 200

80
70
150
60
2nd Gear
50
100
40
3rd Gear
30

20 50

10

0 0
0 1 2 3 4 5 6 7 8 mph

0 2 4 6 8 10 12 km/h

Machine Speed

16 D11T/D11T CD Track-Type Tractor specifications

Transmission D11T CD Weights (approximate)

1 Forward 3.9 km/h 2.4 mph Operating Weight 113 000 kg 248,600 lb
2 Forward 6.8 km/h 4.2 mph Shipping Weight 75 455 kg 166,000 lb
3 Forward 11.8 km/h 7.3 mph Operating Weight: Includes lubricant, coolant, full fuel tank,
1 Reverse 4.7 km/h 5.9 mph hydraulic controls and fluids, 910 mm (36 in) extreme service
2 Reverse 8.2 km/h 5.1 mph shoes, 11 carrydozer, single-shank ripper (optional equipment)
3 Reverse 14.0 km/h 8.7 mph and operator.

Features Shipping Weight: Includes lubricants, coolant, 20% fuel,

and ROPS with FOPS cab.
Special modulation system permits fast speed and
direction changes
533 mm (21 in) diameter, high torque capacity oil-cooled Cab
clutches
Exclusive F 37 friction material for excellent life ISO 3471-1 1986 ROPS
Modular transmission, bevel gear, and differential plug ISO 3471-1 1994 ROPS
into rear of main drive case ISO 3449 1992 LEVEL II FOPS
Two oil-to-water coolers mounted under radiator Caterpillar cab and Rollover Protective Structure (ROPS)
Single-stage torque converter with output torque divider are standard in North America, Europe, and Japan.
Double universal joint eases service

Sealed and Lubricated Track

Service Refill Capacities
Positive Pin Retention (PPR) for extra protection of track seal
in high impact conditions.
Fuel Tank 1609 L 425 gal
Optional Fuel Tank 1987 L 505 gal Pitch 318 mm 12.5 in
Cooling System 238.8 L 63 gal Number Shoes/Side 41
Engine Crankcase 106 L 28 gal Shoe Type Extreme service
Power Train 344 L 91 gal Width of Shoe
Final Drives (each) 30 L 8 gal D11T 710 mm 28.0 in
Roller Frames (each) 95 L 25.1 gal D11T CD 910 mm 36.0 in
Pivot Shaft Compartment 51 L 13.5 gal Length of Track on Ground 4444 mm 14 ft 7 in
Implement Hydraulic 243 L 64 gal Ground Contact Area
System Tank Only D11T 6.3 m2 9,781 in2
D11T CD 8.1 m2 12,581 in2
Grouser Height
D11T Weights (approximate) (from ground face of shoe) 102 mm 4.0 in
Ground Clearance 623 mm 24.5 in
Operating Weight 104 590 kg 230,100 lb
Gauge 2896 mm 9 ft 6 in
Shipping Weight 74 4182 kg 163,200 lb
Features
Operating Weight: Includes lubricant, coolant, full fuel tank,
hydraulic controls and fluids, 810 mm (32 in) extreme service Sleeve bearing track
shoes, 11U ABR bulldozer, single-shank ripper with pin puller Lubricant reduces internal bushing wear
and fast fuel, engine doors (optional equipment) and operator. Hydraulic track adjusters; track guiding guards; and large,
Shipping Weight: Includes lubricants, coolant, 20% fuel, positive clamping, two-piece master link are standard
and ROPS with FOPS cab. Improved track joint sealability
Stronger track link to resist high impact loads

D11T/D11T CD Track-Type Tractor specifications 17

Track Roller Frame Hydraulic Controls

Oscillation 362 mm 14.3 in Complete system consists of pump, tank with filter, oil cooler,
valves, lines, linkage and control levers.
Features
Lifetime lubricated rollers and idlers resiliently mounted Attachments Gear-type pump (D11T)
to roller frame by a series of bogies Output at 1,890 rpm 620 L/min 164 gpm
and 6895 kPa (1,000 psi)
Tubular design resists torsional loads
Tilt Cylinder Flow 155 L/min 41 gpm
Bogies oscillate on sealed and lubricated cartridge pin
Bulldozer Relief Valve Settings 22 750 kPa 3,300 psi
connections, travel controlled by resilient pads
Tilt Cylinder Relief Valve Settings 24 300 kPa 3,525 psi
Roller frame attaches by a pivot shaft and fully pinned
Ripper (Lift) Relief Valve Settings 22 750 kPa 3,300 psi
equalizer bar
Ripper (Pitch) Relief Valve Settings 22 750 kPa 3,300 psi
Eight rollers per side
Large pivot bushing operate in an oil reservoir Attachments Gear-type pump (D11T CD)
Equalizer bar-roller frame ball joint pins and high capacity Output at 1,890 rpm 670 L/min 177 gpm
bearings have improved seal and operate in oil reservoir and 6895 kPa (1,000 psi)
Tilt Cylinder Flow 250 L/min 66 gpm
Improved center bearing in equalizer bar for improved
life. Improved pin corrosion resistance, provides ease CarryDozer Relief Valve Settings 24 135 kPa 3,500 psi
of serviceability Dump Cylinder Relief Valve Settings 24 825 kPa 3,600 psi
Recoil system is fully sealed and lubricated Ripper (Lift) Relief Valve Settings 24 135 kPa 3,500 psi
Large idler caps with three-bolt mounting Ripper (Pitch) Relief Valve Settings 24 135 kPa 3,500 psi

Electro-hydraulic pilot valves assist operations of ripper

and dozer tilt controls. Standard hydraulic systems include
Steering and Brakes two valves for carrydozer and dump, and a regeneration valve
for quick dump.
Electronic Finger Tip Controls (FTC) combine steering clutch
Standard Ripper Control
disengagement and braking for each track. Pull back slightly
to disengage steering clutches, fully back to brake track. Two additional valves for ripper function

Low-effort Finger Tip Controls for steering Hydraulic shank pitch adjustment
Hydraulically applied multiple-disk clutches Optional pin pull on hydraulics
High capacity brakes are hydraulically released, spring
applied, and have computerized electronic brake control
for excellent brake modulation
Single pedal simultaneously applies brakes to tracks for
fast stops
Parking brake applied electronically, which engages
parking brake and locks the Finger Tip Controls
High capacity (high power dissipation)
Large diameter disks 610 mm (24 in)

18 D11T/D11T CD Track-Type Tractor specifications

Dimensions D11T
All dimensions are approximate.

With attachments add to overall machine length:

Single-shank ripper 1850 mm 6' 1" Width over trunnions 4365 mm 14' 4"
Single-shank ripper Drawbar height (centerline
with push block 2190 mm 7' 2.2" of clevis) from ground
Multi-shank ripper 1915 mm 6' 3.4" face of shoe 777 mm 30.6"
11SU Dozer 2220 mm 7' 3.4"
11U Dozer 2668 mm 8' 9" Note: model shown equipped with 710 mm (28") shoes.

3322 mm
(10' 11")

4398 mm
(14' 5") 4596 mm
(15' 1")

4667 mm 3580 mm
(15' 4") (11' 9")
2773.3 mm
(9' 1")

674.5 mm
(26.5") 1987 mm
2896 mm (6' 6")
(9' 6") Gauge
3606 mm 6027 mm
(11' 10") (19' 9")
6358 mm 10 584.9 mm
(20' 10") (34' 9")

Dimensions D11T CD
All dimensions are approximate.

With attachments add to overall machine length:

Single-shank ripper 2156 mm 7' 0.7"
Multi-shank ripper 1935 mm 6' 4"
11 Carrydozer 2178 mm 7' 1.5"
Width over trunnions 4365 mm 14' 4" Note: model shown equipped with 910 mm (36") shoes.

3322 mm
(10' 11")

4398 mm
(14' 5")
4591.7 mm
(15' 1")
4667 mm
(15' 4") 3580 mm
(11' 9")

3098 mm
(10' 2")

674.5 mm
(26.5") 2156 mm 1987 mm 2178 mm
2896 mm (7' 1") (6' 6") (7' 2")
(9' 6") Gauge 6027 mm
3806 mm (19' 9")
(12' 6") 10 918.2 mm
6706 mm (35' 10")
(22' 0")

D11T/D11T CD Track-Type Tractor specifications 19

D11T Bulldozer
Tag link dozer coupling brings blade closer for better balance and control.

Blade 11SU ABR 11U ABR 11SU 11U

Blade capacity (SAE J1265) m 3
27.2 34.4 27.2 34.4
yd3 35.5 45.0 35.5 45.0
Width with blade mm 5600 6358 5600 6358
(over end bits) ft/in 18'4" 20'10" 18'4" 20'10"
Blade height mm 2773 2773 2773 2773
ft/in 9'1" 9'1" 9'1" 9'1"
Digging depth mm 766 766 766 766
in 30.2 30.2 30.2 30.2
Ground clearance mm 1533 1533 1533 1533
ft/in 5'0" 5'0" 5'0" 5'0"
Maximum tilt mm 1184 1344 1184 1344
ft/in 3'11" 4'5" 3'11" 4'5"
Weight* kg 16 192 18 823 14 813 17 296
lb 35,698 41,498 32,658 38,131
Total operating weight**
(with blade and kg 101 955 104 590 100 573 103 060
single-shank ripper) lb 224,300 230,100 221,260 226,733

*Does not include hydraulic controls but includes blade cylinders.

**Includes blade and single-shank ripper, hydraulic controls, blade cylinders, coolant, lubricants, full fuel tank,
810 mm (32 in) shoes, ROPS, FOPS cab, and operator.
Features
Dual-tilt is standard for improved blade loading, carrying, and dumping
Cutting edges are DH-2 steel and end bits are DH-3 steel for maximum durability
Dozer lift cylinders mount to top corners of radiator guard to improve mechanical advantage
Single lever controls all blade functions
Aggressive heel clearance for improved blade penetration

20 D11T/D11T CD Track-Type Tractor specifications

D11T CD Bulldozer
Tag link dozer coupling brings blade closer for better balance and control.

CarryDozer Blade
Blade capacity m3 43.6
yd3 57.0
Width with blade (over end bits) mm 6706
ft/in 22'0"
Blade height w/cutting edge at 53 mm 2740
ft/in 9'0"
Blade height w/cutting edge at 53 mm 3255
and rock guard ft/in 10'8"
Digging depth
Rack back mm 688
in 27.1"
Full dump mm 1708
in 67.2"
Ground clearance
Rack back mm 1846
ft/in 6'1"
Full dump mm 307
ft/in 12.1"
Maximum tilt mm 1800
ft/in 5'11"
Weight* kg 23 600
lb 51,920
Total operating weight** kg 113 000
lb 248,600

* Does not include hydraulic controls but includes blade cylinders.

** Includes blade and single-shank ripper, hydraulic controls, blade cylinders, coolant,
lubricants, full fuel tank, 910 mm (36 in) shoes, ROPS, FOPS cab, and operator.
Features
Dual-tilt/dump cylinders are standard for improved blade loading, carrying, and dumping
Cutting edges and end bits are DH-2 steel for maximum durability
Dozer lift cylinders mount to top corners of radiator guard to improve mechanical advantage
Single lever controls all blade functions
Aggressive heel clearance for improved blade penetration
Rock guard
Wear plates
Router protectors

D11T/D11T CD Track-Type Tractor specifications 21

Ripper
Redesigned ripper frame for improved visibility to ripper tip. Hydraulic tip adjustment cylinders vary shank angle to aid
penetration and help lift and shatter rock.

D11T D11T/D11T CD D11T CD

Single-shank
Deep Ripping + Multi-shank + Multi-shank
Single-shank Arrangement Arrangement Single-shank Arrangement
Overall beam width mm 3330 3330
ft/in 10'11" 10'11"
Maximum penetration force*
(shank vertical) kN 288 292 277 326 306
lb 64,800 65,644 62,325 73,350 68,850
Maximum penetration
(standard tip) mm 1612 2172 1070 1612 1070
ft/in 5'3" 7'2" 3'6" 5'3" 3'6"
Pryout force
(multi-shank ripper kN 660 657 646 642 650
with one tooth) lb 148,500 147,772 145,350 144,450 146,250
Maximum clearance raised
(under tip, pinned mm 1115 878 1137 1115 1137
in bottom hole) in 43.9" 34.6" 44.8" 43.9" 44.8"
Number of shank holes 4 3 2 4 2
Weight
(without hydraulic kg 9643 10 022 9698 12 733 12 025
controls) lb 21,215 22,050 21,335 28,076 26,515
Total operating weight** with 11U ABR blade and ripper with 11CD blade and ripper
kg 104 590 104 970 104 485 113 000 112 521
lb 230,100 230,935 229,867 248,600 247,039

* Specifications are converted from British to metric measure and rounded.

** Operating weight includes lubricant, coolant, full fuel tank, hydraulic controls, 810 mm (32 in) extreme service shoe, ROPS,
FOPS cab, and operator.
+ Includes one shank. Add 671 kg (1,489 lb) for each additional shank.
Note: Single-shank, deep ripping arrangement weight includes required pin puller.

Features
Optional single-shank pin puller lets operator adjust shank depth from seat
Large one-piece shank
Multi-shank ripper allows variable use of one, two, or three shanks to match job conditions

22 D11T/D11T CD Track-Type Tractor specifications

Standard Equipment
Standard equipment may vary. Consult your Caterpillar dealer for details.

ELECTRICAL UNDERCARRIAGE
Alarm, back-up Grousers
Alternator, 100-amp D11T: 710 mm (28 in), D11T CD: 910 mm (36 in)
Batteries, 12-volt (4), 190 amp-hour Extreme service
Converter, 12-volt, 10-amp Sealed/lubricated PPR sleeve bearing track
Converter, 12-volt, 15 amp Three bolt idler and roller caps
Deutsch electrical connectors 41 section
Diagnostic connector Hydraulic track adjusters
Horn, forward warning Suspension-type undercarriage,
Lighting system, 5 HID/4 Halogen 8-roller tubular track roller frame
(2 forward, 2 rear) Track guides
Receptacle, starting
OTHER STANDARD EQUIPMENT
OPERATOR ENVIRONMENT CD ROM parts book
Advisor electronic monitoring system Dual-tilt blade control
Air conditioning Engine enclosures
Armrest, adjustable Fluid sampling ports
Deactivation switch, hydraulic controls Guards:
Decelerator, governor switch Bottom, extreme service, hinged, with front towing device
Finger Tip Control (FTC) steering Hinged radiator
Heater Hinged power train
Hydraulic system electronically controlled for bulldozer Vandalism, protection (8 caplocks)
control (lift, tilt, dump) Ripper
Product Link ready cab
Radio-ready cab
Rearview mirror
ROPS rollbar and FOPS sound suppressed cab
Seat, air suspension
Seatbelt, retractable 76 mm (3 in)
Wipers, intermittent

POWER TRAIN
Cat C32 ACERT
24-volt electric start
Air cleaner with precleaner (2)
MEUI
Ether starting aid, automatic
Fuel priming pump, electric
Muffler with rain cap (2)
Turbocharged/aftercooled
Advanced Modular Cooling System (AMOCS)
Clutch and brake system, electronic
Drains, ecology fluid
Fan, suction with hydraulic demand drive
Oil change system (for fast engine and drive train oil change)
Parking brake, electronic
Planetary final drives, 4-planet, double-reduction
Powershift transmission (3 speed)
Precleaner with dust ejector
Torque divider
Heater, engine coolant (120 volt)

D11T/D11T CD Track-Type Tractor specifications 23

Optional Equipment
Optional equipment may vary. Consult your Caterpillar dealer for details.

Air conditioner, ROPS mounted (R134A) Heater, fuel

AutoCarry Blade Control System High altitude arrangement
Access Ladder Hydraulics:
Bulldozer D11T: Pin puller
11SU Abrasion Oil renewal system
(Semi-universal blade includes tilt cylinders, wear plates, Operators arrangement
rock guard, and extended wear life cutting edges and (improves visibility and comfort for smaller operators)
end bits.) Paint, black hood and cylinders
11U Abrasion Pin puller
(Universal blade includes tilt cylinders, wear plates, rock Prelube, engine automatic
guard, and extended wear life cutting edges and end bits.) Rippers D11T:
11SU Single shank
(Semi-universal blade includes push plate and general Single shank with extra counterweight (3175 kg/7,000 lb)
duty cutting edges and end bits. Does not include rock Multi-shank
guard or wear plate.) Multi-shank, deep
11U Rippers D11T CarryDozer:
(Universal blade includes push plate and general duty Single shank, extra counterweight (3175 kg/7,000 lb)
cutting edges and end bits. Does not include rock guard Multi-shank, extra counterweight (12 700 kg/28,000 lb)
or wear plate.) Roller, carrier
Bulldozer D11T CarryDozer: Roller frame, aligned straight
11 CarryDozer (Includes blade dump cylinders, wear plates, Rollers, single flange
rock guard, pin-on edge protectors, and general duty Seat, vinyl
cutting edges and end bits) Tank, fuel, additional capacity (1987 L/505 gallons)
Cab, enhanced clean Tracks, pair 711 mm (28 in) ES (D11T only):
Camera, WAVS, single rear ARM grousers
Camera, WAVS, dual rear Trapezoidal holes
CAES ready option Tracks, pair, 813 mm (32 in) ES (various options)
Counterweight: Stainless end treated bushings
Rear (4990 kg/11,000 lb) ARM grousers
Rear (additional 2268 kg/5,000 lb) Trapezoidal holes
Rear (extended 13 608 kg/30,000 lb) Tall, tough steel links (D11T only)
Cylinder, single tilt Tall, tough steel links and trapezoidal holes
Fan, reduced minimum speed, arctic Tracks, pair, 914 mm (36 in) ES (various options)
Fast fill fuel system ARM grousers
Glass, ultra strength [276 kPa (40 psi)] Trapezoidal holes (D11T only)
Grease point, ripper lines Tall, tough steel links
Guards: Walkway, rear
Final drive clamshell
Partial bottom
Transmission
Undercarriage
Heater, engine coolant (240 volt)

24 D11T/D11T CD Track-Type Tractor specifications

Notes

D11T/D11T CD Track-Type Tractor specifications 25

Notes

26
Notes

27
D11T/D11T CD Track-Type Tractor

For more complete information on Cat products, dealer services,

and industry solutions, visit us on the web at www.cat.com

2007 Caterpillar
All Rights Reserved
Printed in U.S.A.

Materials and specifications are subject to change without notice.

Featured machines in photos may include additional equipment.
See your Caterpillar dealer for available options.

AEHQ5656-01 (10-07) CAT, CATERPILLAR, ACERT, SAFETY.CAT.COM, their respective logos, Caterpillar Yellow
and the POWER EDGE trade dress, as well as corporate and product identity used
Replaces AEHQ5656 herein, are trademarks of Caterpillar and may not be used without permission.