Narrow Gap Welding

Process
Tandem Submerged Arc

The Lincoln Electric Narrow Gap Welding The outstanding results of the Narrow Gap
Process is designed to meet the quality, Process are made possible by several new
mechanical properties and overall cost submerged arc flux/electrode combinations
requirements of heavy wall fabrication. It is and a specially designed deep groove nozzle
a submerged arc process designed to weld assembly. Only the recommended flux/
thick walled steel plate [from 2 in. up to 13.8 electrode combinations should be used. When
in. (51 mm up to 350 mm)] using a nearly properly selected to meet the job requirements,
parallel-sided, narrow gap plate preparation. these flux/electrode combinations will deliver
The process is appropriate for both flat and excellent welding characteristics and
circumferential welding. mechanical properties. When following the
recommended procedures, very good bead
A multi-layer (two passes per layer) shape and self-releasing slag will result.
technique is recommended in place of
one large pass per layer. This minimizes The Narrow Gap Process results in lower
undercut, trapped or mechanically locked cost welding by reducing the volume of weld
slag and concave weld profiles. The Narrow metal required for heavy plate thicknesses.
Gap Process produces a multi-layer weld The cost of consumables, welding time and
with uniform side wall penetration, maintaining preparation time is reduced when compared
low parent metal dilution and low heat input. to more conventional methods.

INDUSTRY APPLICATIONS
Power Generation
Petrochemical
Shipbuilding
Heavy Fabrication
Nuclear

BENEFITS
Minimum joint preparation, minimum joint
volume.
Good mechanical properties.
Low heat input.
Low parent metal dilution, small heat
affected zone.
High quality weldwithout turning plate.
Simple off-the-shelf equipment solution.
Low distortion.

www.lincolnelectric.com/automated-solutions
 AN UNBEATABLE SOLUTION: Multi-Pass SequencingThe number of passes,
as well as the control of pass transition, overlap
POWER WAVE TECHNOLOGY positions and durations, are all completely
Increase Productivity, Quality and Flexibility programmable.
The Power Wave AC/DC 1000 SD delivers
Waveform Control Technology to submerged arc Adaptive FillThe laser scanning system is
welding. Choose constant current or constant voltage also capable of joint volume measurements.
operation and set variable frequency and amplitude. This information, combined with control of the
Software driven AC, DC positive or DC negative welding parameters and travel rate, can be used to
output allows the user to control the deposition rate automatically adjust to maintain even fill.
and penetration. The result over conventional power
sources is increased weld speeds, consistently higher Independently Adjustable Torch TiltThe lead
quality welds and improved efficiencies in a single or and trail arcs are programmed with independent tilt
multi-arc environment. angles to more accurately and consistently control
bead placement.

NARROW GAP WELDING Programmable Pass OverlapPositioning of the

pass overlap is programmable to allow the pass
SYSTEM FEATURES transitions to be staggered.
Programmable Sidewall OffsetThe combination
of accurate laser tracking and precision wire servo Scanning Laser Tracking SensorPrecision sensor
tilt nozzles allow the system to be programmed to for reliable sidewall offset and height control.
maintain a specific sidewall offset. If enabled, the
controller also allows this offset to be overridden by
the operator during welding.

WELDING HEAD FEATURES Manual angle setting device for adjustable cross LINCOLNWELD WIRE
Maximum groove depth13.8 in./350 mm
seam tilt of entire weld head.
Adjustable range
AND FLUX
Head width0.5 in/13 mm 3 degrees inclusive With over 70 years of experience in flux design
and manufacturing, and a full line of solid and
Individual precision tandem torch tilting: Non-conductive torch body for lead or trail
cored wires for subarc welding, Lincoln Electric
Servo motor control with precision gearbox torches
is your best source for submerged arc welding
Adjustable range3 degrees inclusive 2-axis wire straighteners for both lead and trail consumables. Better chemistry control and
Precision X-Z weld head motion controls: torches better manufacturing systems result in flux and
Horizontal stroke6 in./150 mm Tandem wire feeders with 55 lb./25 kg wire wire of consistently superior qualitytime after
Vertical stroke17.7 in./450 mm spool mountingother wire delivery options time. With over 100 wire and flux combinations
Precision servo controls for automatic available to choose from, theres a great Lincolnweld
standoff and seam tracking controls combination for whatever your job demands.
Integrated color viewing camera with work lamp
Adjustable spacing between torchesadjusting For more information, request publication C1.10
range 1.2 in./30 mm Flux delivery and recovery nozzle, hopper and Consumables Catalog.
mounting
Productivity Improvement - PERCENTAGE %

Automation Service (8 am - 5 pm EST)

1-888-935-3878
Automation After-Hours Service
1-888-532-8001
Automation Regional Service Center
obe improve product quality,

Phone: (615) 291-9927 Nashville, TN r than Lincoln Electric. Automated

Fax: (615) 291-9928 Nashville, TN ll, or youre ready to upgrade or

Scanning laser
tracking sensor
A Solutions for Weld Fume Control on Automated Systems
Formed Extraction Hoods Modular Extraction Hoods
Lincoln Electric Automation offers a complete line of weld fume extraction Also available are modular extraction hoods for custom or non-Lincoln
HOODSTHATARESIZEDTOFITOURPRE ENGINEEREDROBOTICCELLS!VAILABLE Electric work cells.
options include interior lighting and preventive maintenance contracts.
s #ONTAINSANDEXTRACTSFUMEFROMMETALWORKINGOPERATIONSINCLUDING
robotic welding, hard automation, cutting, arc gouging and grinding.
s ,ARGESELECTIONOFHOODSIZESUPTOFTXFTMXM

Cutting
covers a wide variety of applications.
s -ODULAREXTRUDEDALUMINUMCONSTRUCTIONMAKESTHEHOODEASY
to assemble.

1 s -ULTIPLEINSTALLATIONOPTIONSMINIMIZEINTERFERENCEWITHAPPLICATION

Systems
Narrow welding head
www.lincolnelectric.com/automated-solutions

UNITED STATES
C U S TO M E R A S S I S TA N C E P O L I C Y
22221 Saint Clair Ave.
Statiflex Filter Banks
For filtration of welding fume, a Statiflex Filter
"ANKCANBEINCORPORATEDINTOTHEWELDFUME
The business of The Lincoln Electric Company is manufacturing and selling high quality welding equipment, consumables, and cutting equipment. Our Cleveland, Ohio 44117-2552
control system. The Statiflex&ILTER"ANKS
filters have a MERV 16 rating, modular layout

challenge is to meet the needs of our customers and to exceed their expectations. On occasion, purchasers may ask Lincoln Electric for information or and innovative filter cartridge cleaning system

advice about their use of our products. Our employees respond to inquiries to the best of their ability based onCutting
informationSystems
provided to them by thecus- Phone: +1.888.935.3878Automation Solutions making it a robust filtration solution.

tomers and the knowledge they may have concerning the application. Our employees, however, are not in a position to verify the information provided
or to evaluate the engineering requirements for the particular weldment. Accordingly, Lincoln Electric does not warrant or guarantee or assume any CANADA
Automation Service Hotline
1-888-935-3878

liability with respect to such information or advice. Moreover, the provision of such information or advice does not create, expand,
JOSHorSCHOHN
alter any warranty CHRISTOPHER A. BAILEY Automation After-Hours Technical Support

on our products. Any express or implied warranty that might arise from the information or advice, including any implied warranty of merchantability
Product Manager or 939 Gana Court General Manager, Automation
For additional arc welding safety information see:
www.lincolnweldfumecontrol.com
1-888-532-8001

any warranty of fitness for any customers particular purpose is specifically disclaimed. Mississauga, Ontario L5S 1N9
www.lincolnelectric.com/safety

4HEOPERATIONOFWELDINGFUMECONTROLEQUIPMENTISAFFECTEDBYVARIOUSFACTORSINCLUDINGPROPERUSEAND

Lincoln Electric is a responsive manufacturer, but the selection and use of specific products soldBlvd.,
280 S. Rock by Lincoln P: 775.673.2200
Electric is solely within
Suite 150 the control of, and Phone: +1.905.565.5600
22221 Saint Clair Avenue P: 216.481.8100
POSITIONINGOFTHEEQUIPMENTMAINTENANCEOFTHEEQUIPMENTANDTHESPECIFICWELDINGPROCEDUREAND
APPLICATIONINVOLVED7ORKEREXPOSURELEVELSHOULDBECHECKEDUPONINSTALLATIONANDPERIODICALLYTHEREAFTERTO
F: 775.673.2206 BECERTAINITISWITHINAPPLICABLE/3(!0%,AND!#')(4,6LIMITS
F: 216.383.4732
remains the sole responsibility of the customer. Many variables beyond the controlReno, NV 89502
of Lincoln Electric affect
U.S.A. the results obtained
C: in applying these types
216.123.4567
Cleveland, OH 44117-1199 U.S.A.
C: 216.123.4567
of fabrication methods and service requirements. www.lincolnelectric.com www.lincolnelectric.com
888.123.4567 MEXICO 888.123.4567
C U S T O M E R A S S I S TA N C E P O L I C Y
4HEBUSINESSOF4HE,INCOLN%LECTRIC#OMPANYISMANUFACTURINGANDSELLINGHIGHQUALITYWELDINGEQUIPMENTCONSUMABLESANDCUTTINGEQUIPMENT/URCHALLENGEISTOMEETTHENEEDSOFOUR
CUSTOMERSANDTOEXCEEDTHEIREXPECTATIONS/NOCCASIONPURCHASERSMAYASK,INCOLN%LECTRICFORINFORMATIONORADVICEABOUTTHEIRUSEOFOURPRODUCTS/UREMPLOYEESRESPONDTOINQUIRIESTOTHE The Lincoln Electric Company
best of their ability based on information provided to them by the customers and the knowledge they may have concerning the application. Our employees, however, are not in a position to verify
Automation Division

Subject to Change This information is accurate to the best of our knowledge at the time of printing. Please refer to www.lincolnelectric.com for any
THEINFORMATIONPROVIDEDORTOEVALUATETHEENGINEERINGREQUIREMENTSFORTHEPARTICULARWELDMENT!CCORDINGLY,INCOLN%LECTRICDOESNOTWARRANTORGUARANTEEORASSUMEANYLIABILITYWITHRESPECT

Calzada Azcapotzalco-La [email protected]

869
to such information or advice. Moreover, the provision of such information or advice does not create, expand, or alter any warranty on our products. Any express or implied warranty that might
ARISEFROMTHEINFORMATIONORADVICEINCLUDINGANYIMPLIEDWARRANTYOFMERCHANTABILITYORANYWARRANTYOFlTNESSFORANYCUSTOMERSPARTICULARPURPOSEISSPECIlCALLYDISCLAIMED 22221 Saint Clair Avenue

[email protected] Cleveland, Ohio 44117-2522 USA

updated information.
Lincoln Electric is a responsive manufacturer, but the selection and use of specific products sold by Lincoln Electric is solely within the control of, and remains the sole responsibility of the
CUSTOMER-ANYVARIABLESBEYONDTHECONTROLOF,INCOLN%LECTRICAFFECTTHERESULTSOBTAINEDINAPPLYINGTHESETYPESOFFABRICATIONMETHODSANDSERVICEREQUIREMENTS
1-216-383-2667

Industrial Vallejo, Mexico DF CP 02330

Subject to Change This information is accurate to the best of our knowledge at the time of printing. Please refer to www.lincolnelectric.com for any updated information.
Email: [email protected]
www.lincolnelectric.com/automated-solutions
MC10-146 04/12

An Equal Opportunity Employer Printed in U.S.A. 2010 Lincoln Global, Inc. MC09-109 (4/10) Phone: +52.55.5063.0330

or email >>JViiVVV.